Professional Documents
Culture Documents
Features
Available with Colon for
Clock Display
Compact Package
0.300 x 0.500 inches
Leads on 2.54 mm (0.1 inch)
Centers
Choice of Colors
AlGaAs Red, High
Efficiency Red, Yellow, Green,
Orange
Excellent Appearance
Evenly Lighted Segments
Mitered Corners on Segments
Surface Color Gives Optimum
Contrast
50 Viewing Angle
Design Flexibility
Common Anode or Common
Cathode
HDSP-740x Series
HDSP-750x Series
HDSP-780x Series
HDSP-A15x Series
HDSP-A40x Series
Description
The 7.6 mm (0.3 inch) LED seven
segment displays are designed for
viewing distances up to 3 metres
(10 feet). These devices use an
industry standard size package
and pinout. Both the numeric and
Devices
Orange
HDSP-
AlGaAs[1]
HDSP-
HER[1]
HDSP-
Yellow[1]
HDSP-
Green[1]
HDSP-
A401
A151
7501
7401
7801
7502
7402
7802
7503
7403
7803
7504
7404
7804
A157
7507
7407
7807
A158
7508
7408
7808
A403
A153
Description
Package
Drawing
Note:
1. These displays are recommended for high ambient light operation. Please refer to the HDSP-A10X AlGaAs, HDSP-335X HER, HDSPA80X Yellow, and HDSP-A90X Green data sheet for low current operation.
Package Dimensions
NOTES:
1. ALL DIMENSIONS IN MILLIMETRES (INCHES).
2. MAXIMUM.
3. ALL UNTOLERANCED DIMENSIONS ARE
FOR REFERENCE ONLY.
4. REDUNDANT ANODES.
5. REDUNDANT CATHODES.
6. FOR HDSP-7400/-7800 SERIES PRODUCT ONLY.
Description
Average Power per Segment or DP
HER/Orange
Yellow
HDSP-7500/-A40X HDSP-7400
Series
Series
Green
HDSP-7800
Series
Units
96
105
80
105
mW
160[1]
90[3]
60[5]
90[7]
mA
40[2]
30[4]
20[6]
30[8]
mA
20 to +100[9]
40 to +100
55 to +100
3.0
250
Notes:
1. See Figure 1 to establish pulsed conditions.
2. Derate above 46C at 0.54 mA/C.
3. See Figure 6 to establish pulsed conditions.
4. Derate above 53C at 0.45 mA/C.
5. See Figure 7 to establish pulsed conditions.
6. Derate above 81C at 0.52 mA/C.
7. See Figure 8 to establish pulsed conditions.
8. Derate above 39C at 0.37 mA/C.
9. For operation below 20C, contact your local Agilent components sales office or an authorized distributor.
Parameter
Symbol
Min.
Typ.
Luminous Intensity/Segment[1,2,5]
(Digit Average)
IV
6.9
14.0
mcd
IF = 20 mA
1.8
IF = 20 mA
Forward Voltage/Segment or DP
VF
V
IF = 100 mA
2.0
A15x
Max.
3.0
Units
PEAK
645
nm
Dominant Wavelength[3]
637
nm
VR
15.0
Peak Wavelength
3.0
Temperature Coefficient of
VF /Segment or DP
VF /C
-2
mV/C
RJ-PIN
255
C/W/Seg
Test Conditions
IR = 100 A
Parameter
Symbol
Intensity/Segment[1,2,6]
Luminous
(Digit Average)
Min.
Typ.
360
980
Max.
Units
cd
IV
5390
Forward Voltage/Segment or DP
750x
VF
2.0
2.5
PEAK
635
nm
626
nm
VR
30
Dominant
3.0
IF = 5 mA
IF = 20 mA
Wavelength[3]
Peak Wavelength
Test Conditions
Temperature Coefficient of
VF /Segment or DP
VF /C
-2
mV/C
RJ-PIN
200
C/W/Seg
IF = 20 mA
IR = 100 A
Orange
Device
Series
HDSP-
Parameter
Symbol
Intensity/Segment[1,2,6]
A40x
Min.
Typ.
Max.
Units
Luminous
(Digit Average)
IV
0.70
Forward Voltage/Segment or DP
VF
2.0
PEAK
600
nm
603
nm
30
Peak Wavelength
Dominant Wavelength[3]
Reverse Voltage/Segment or
DP[4]
VR
3.0
2.5
Test Conditions
mcd
IF = 5 mA
IF = 20 mA
Temperature Coefficient of
VF /Segment or DP
VF /C
-2
mV/C
RJ-PIN
200
C/W/Seg
IR = 100 A
Yellow
Device
Series
HDSP-
Parameter
Symbol
Luminous Intensity/Segment[1,2,7]
(Digit Average)
Min.
Typ.
225
480
Max.
Units
cd
IV
740x
Peak Wavelength
VF
2.2
PEAK
583
IF = 5 mA
IF = 20 mA
2740
Forward Voltage/Segment or DP
Test Conditions
2.5
IF = 20 mA
nm
Dominant Wavelength[3,9]
581.5
586
VR
3.0
50.0
592.5
nm
Temperature Coefficient of
VF /Segment or DP
VF /C
-2
mV/C
RJ-PIN
200
C/W/Seg
IR = 100 A
Parameter
Symbol
Luminous Intensity/Segment[1,2,8]
(Digit Average)
Min.
Typ.
860
3000
Max.
Units
cd
IV
6800
Forward Voltage/Segment or DP
780x
Peak Wavelength
Dominant Wavelength[3,9]
Reverse Voltage/Segment or
DP[4]
VF
2.1
PEAK
566
571
VR
3.0
Test Conditions
IF = 10 mA
IF = 20 mA
2.5
IF = 10 mA
nm
577
nm
50.0
Temperature Coefficient of
VF /Segment or DP
VF /C
-2
mV/C
RJ-PIN
200
C/W/Seg
IR = 100 A
Notes:
1. Case temperature of device immediately prior to the intensity measurement is 25C.
2. The digits are categorized for luminous intensity. The intensity category is designated by a letter on the side of the package.
3. The dominant wavelength, d, is derived from the CIE chromaticity diagram and is that single wavelength which defines the color of
the device.
4. Typical specification for reference only. Do not exceed absolute maximum ratings.
5. For low current operation the AlGaAs HDSP-A101 series displays are recommended.
6. For low current operation the HER HDSP-7511 series displays are recommended.
7. For low current operation the Yellow HDSP-A801 series displays are recommended.
8. For low current operation the Green HDSP-A901 series displays are recommended.
9. The yellow (HDSP-7400) and Green (HDSP-7800) displays are categorized for dominant wavelength. The category is designated by a
number adjacent to the luminous intensity category letter.
100
OPERATION IN THIS
REGION REQUIRES
TEMPERATURE
OPERATING OF I DC
MAXIMUM
10
100
z
0H
10
z
Hz
0H
30
10
Hz
3K
1K
Z
KH
10
AlGaAs Red
1000
10000
DC OPERATION
t P PULSE DURATION s
50
RJ-A = 770C/W
45
AlGaAs RED
40
35
30
25
20
15
10
5
0
20 30
40
50 60
70 80
160
140
120
AlGaAs RED
100
80
60
40
20
0
2.00
1.75
AlGaAs RED
1.50
1.25
1.00
0.75
0.50
0.25
10
15
20
25
30
35
40
1.5
2.0
2.5
3.0
3.5
4.0
1.0
VF FORWARD CURRENT V
TA AMBIENT TEMPERATURE C
0.5
1.4
1.2
1.0
AlGaAs RED
0.8
0.6
0.5
5.0
50.0
150.0
OPERATION IN THIS
REGION REQUIRES
TEMPERATURE
OPERATING OF I DC
MAXIMUM
10
40
35
30
25
60
YELLOW
40
HER / ORANGE
20
GREEN
5.0
HER, ORANGE
GREEN
20
YELLOW
15
10
5
40
50
60
70 80
TA AMBIENT TEMPERATURE C
80
R
= 770C/W
J-A
12
10
HER / ORANGE
YELLOW
GREEN
2
0
0
10
15
20
25
30
10000
100
VF FORWARD VOLTAGE V
10000
1000
4.0
1000
45
0
20 30
DC OPERATION
3.0
10
30
10
2.0
Z
H
0
10 Hz
10
1.0
50
OPERATION IN THIS
REGION REQUIRES
TEMPERATURE
OPERATING OF I DC
MAXIMUM
100
t P PULSE DURATION s
10
t P PULSE DURATION s
100
100
DC OPERATION
1
10
30
10000
t P PULSE DURATION s
1000
100
10
DC OPERATION
1
10
OPERATION IN THIS
REGION REQUIRES
TEMPERATURE
OPERATING OF I DC
MAXIMUM
KH
Hz
Hz
0
30
Hz
1K
3K
10
100
10
100
10
1.8
YELLOW
1.6
HER / ORANGE
1.4
GREEN
1.2
1.0
0.8
0
20
40
60
80
100
Yellow
Max.
13.00
19.40
29.20
43.80
65.60
HER
HDSP-750x
IV Bin Category
Min.
B
0.342
C
0.516
D
0.774
E
1.160
F
1.740
G
2.610
H
3.915
Max.
0.630
0.946
1.418
2.127
3.190
4.785
7.177
Orange
HDSP-A40X
IV Bin Category
Min.
A
0.284
B
0.354
C
0.443
D
0.554
E
0.692
F
0.856
G
1.082
H
1.352
I
1.692
J
2.114
K
2.641
L
3.300
M
4.127
N
5.157
Max.
0.433
0.541
0.677
0.846
1.057
1.322
1.652
2.066
2.581
3.227
4.034
5.042
6.303
7.878
IV Bin Category
B
C
D
E
F
G
H
HDSP-740x
Min.
0.229
0.317
0.476
0.714
1.073
1.609
2.413
Max.
0.387
0.582
0.872
1.311
1.967
2.950
4.425
HDSP-780x
Min.
0.86
1.29
1.94
2.90
4.37
Max.
1.58
2.37
3.55
5.33
8.01
Green
IV Bin Category
H
I
J
K
L
10
Color Categories
Color
Yellow
Green
Bin
1
3
2
4
2
3
4
5
Note:
All categories are established for classification of products. Products
may not be available in all categories. Please contact your Agilent
representatives for further clarification/information.
Contrast Enhancement
For information on contrast
enhancement, please see
Application Note 1015.
Soldering/Cleaning
Cleaning agents from the ketone
family (acetone, methyl ethyl
ketone, etc.) and from the
chlorinated hydrocarbon family
(methylene chloride, trichloroethylene, carbon tetrachloride,
etc.) are not recommended for
cleaning LED parts. All of these
various solvents attack or dissolve
the encapsulating epoxies used to
form the package of plastic LED
parts.
For further information on
soldering LEDs, please refer to
Application Note 1027.
www.agilent.com/semiconductors
For product information and a complete list of
distributors, please go to our web site.
For technical assistance call:
Americas/Canada: +1 (800) 235-0312 or
(916) 788-6763
Europe: +49 (0) 6441 92460
China: 10800 650 0017
Hong Kong: (+65) 6756 2394
India, Australia, New Zealand: (+65) 6755 1939
Japan: (+81 3) 3335-8152 (Domestic/International), or 0120-61-1280 (Domestic Only)
Korea: (+65) 6755 1989
Singapore, Malaysia, Vietnam, Thailand,
Philippines, Indonesia: (+65) 6755 2044
Taiwan: (+65) 6755 1843
Data subject to change.
Copyright 2004 Agilent Technologies, Inc.
Obsoletes 5988-0382EN
July 17, 2004
5988-4434EN