Professional Documents
Culture Documents
Benefits:
10.08.2010
25.08.2010
●
●
Deployment Details:
esting board we can implement a tesing
r WBM Input and Output cards.
KAIZEN
TESTING CARD WORKING INSTRUCTION
1. Connect the relay card male connector to the female connector the testing board.
2. Give +24V DC supply to the testing board.
3. Initially all RED led's should glow means all NC contacts are o.k.
4. If some of the RED led's are not glowing means respective relay is defective.
5. Press each microswitch and check each relays one by one.
6. While pressing the microswitch GREEN led's should glow else some of the Relay NO contact defective or Relay coil failed.
7. Switch off the power supply and remove the relay card.
CIRCUIT DIAGRAM
K1
S1
D1
D2
RELAY 1
MICROSWITCH 1
GREEN LED 1
RED LED 1