Professional Documents
Culture Documents
WEIGHT
Each length of pipe shall not vary more than 15% over or 5% under its theoretical weight,
calculated using its length and its weight per unit length.
Section Properties
Inside
Nominal Area of
Weight Area of Cross- Inside
Wall Exterior
per foot Metal Moment of Section Radius of sectional Volume
Thickness Surface
(pounds) Am (in²) Inertia, I Modulus, Gyration, Area, (yd.³/ft)
(inches) (ft.²/ft)
(in.4) S (in.³) r (in.) Ac (in.²)
The information presented in this publication has been prepared in accordance with recognized engineering use of this information assumes all liability arising from such use. Caution must be exercised when relying
principles and is for general information only. While it is believed to be accurate, this information should not upon specifications and codes developed by other bodies and incorporated by reference herein since such
be used or relied upon for any specific application without competent professional examination and verifica- material may be modified or amended from time to time subsequent to the printing of this publication. Inde-
tion of its accuracy, suitability and applicability by a licensed professional engineer, designer or architect. pendence Tube Corporation bears no responsibility for such material other than to refer to it and incorporate
The publication of the material contained herein is not intended as a representation or warranty on the part it by reference at the time of the initial publication of this edition. To the best of our knowledge, all information
of "Independence Tube Corporation" or of any other person named herein, that this information is suitable contained herein is correct at the time of publication. Independence Tube Corporation does not assume any
for any general or particular use or of freedom from infringement of any patent or patents. Anyone making responsibility for errors or oversights resulting from the use of the information contained herein.
10.750 inch Outside Diameter - Maximum Axial Load on Concrete Cast in Place Piles (Tons)
Nominal
Wall
35 ksi 50 ksi 60 ksi 35 ksi 50 ksi 60 ksi 35 ksi 50 ksi 60 ksi 35 ksi 50 ksi 60 ksi 35 ksi 50 ksi 60 ksi 35 ksi 50 ksi 60 ksi
Thickness
(inches)
0.188 65.9 82.4 93.5 71.4 87.9 98.9 76.9 93.4 104.4 82.4 98.9 109.9 87.8 104.4 115.4 93.3 109.8 120.8
0.203 68.9 86.7 98.6 74.4 92.2 104.1 79.8 97.6 109.5 85.3 103.1 115.0 90.7 108.6 120.4 96.2 114.0 125.9
0.219 72.1 91.3 104.1 77.5 96.7 109.5 82.9 102.2 115.0 88.4 107.6 120.4 93.8 113.1 125.9 99.3 118.5 131.3
0.230 74.2 94.4 107.9 79.7 99.8 113.3 85.1 105.3 118.7 90.5 110.7 124.1 96.0 116.1 129.6 101.4 121.6 135.0
0.250 78.2 100.1 114.7 83.6 105.5 120.1 89.0 110.9 125.5 94.4 116.3 130.9 99.8 121.7 136.3 105.2 127.1 141.7
0.279 83.9 108.3 124.6 89.3 113.7 129.9 94.6 119.1 135.3 100.0 124.4 140.7 105.4 129.8 146.1 110.8 135.2 151.5
0.307 89.4 116.2 134.1 94.7 121.5 139.4 100.1 126.9 144.8 105.4 132.3 150.1 110.8 137.6 155.5 116.1 143.0 160.8
0.344 96.6 126.6 146.6 101.9 131.9 151.9 107.2 137.2 157.2 112.5 142.6 162.6 117.9 147.9 167.9 123.2 153.2 173.2
0.365 100.7 132.5 153.7 106.0 137.8 159.0 111.3 143.1 164.3 116.6 148.4 169.6 121.9 153.7 174.9 127.2 159.0 180.2
0.375 102.6 135.3 157.1 107.9 140.6 162.4 113.2 145.9 167.6 118.5 151.2 172.9 123.8 156.4 178.2 129.1 161.7 183.5
0.438 114.9 152.9 178.3 120.1 158.1 183.5 125.3 163.3 188.7 130.5 168.6 193.9 135.7 173.8 199.1 141.0 179.0 204.4
0.500 126.8 170.1 199.0 132.0 175.3 204.1 137.1 180.4 209.3 142.3 185.6 214.4 147.4 190.7 219.6 152.6 195.9 224.8
12.750 inch Outside Diameter - Maximum Axial Load on Concrete Cast in Place Piles (Tons)
Nominal
Wall
35 ksi 50 ksi 60 ksi 35 ksi 50 ksi 60 ksi 35 ksi 50 ksi 60 ksi 35 ksi 50 ksi 60 ksi 35 ksi 50 ksi 60 ksi 35 ksi 50 ksi 60 ksi
Thickness
(inches)
0.188 83.3 103.0 116.0 90.9 110.5 123.6 98.4 118.0 131.1 105.9 125.5 138.6 113.4 133.0 146.1 120.9 140.5 153.6
0.203 86.8 108.0 122.1 94.3 115.5 129.6 101.8 123.0 137.1 109.3 130.4 144.5 116.7 137.9 152.0 124.2 145.4 159.5
0.219 90.5 113.3 128.5 97.9 120.8 136.0 105.4 128.2 143.4 112.8 135.6 150.9 120.3 143.1 158.3 127.7 150.5 165.8
0.230 93.0 116.9 132.9 100.4 124.4 140.3 107.8 131.8 147.7 115.2 139.2 155.2 122.6 146.6 162.6 130.0 154.0 170.0
0.250 97.6 123.6 141.0 104.9 131.0 148.3 112.3 138.3 155.7 119.7 145.7 163.1 127.1 153.1 170.4 134.4 160.4 177.8
0.281 104.6 133.8 153.3 111.9 141.1 160.6 119.2 148.4 167.9 126.5 155.7 175.2 133.8 163.0 182.5 141.1 170.3 189.8
0.312 111.8 114.2 165.8 119.1 151.5 173.1 126.3 158.7 180.3 133.6 166.0 187.6 140.8 173.2 194.8 148.0 180.5 202.1
0.344 118.9 154.6 178.4 126.1 161.8 185.6 133.2 168.9 192.7 140.4 176.0 199.8 147.5 183.2 207.0 154.6 190.3 214.1
0.375 126.0 14.8 190.7 133.1 171.9 197.8 140.1 179.0 204.9 147.2 186.0 211.9 154.3 193.1 219.0 161.3 200.2 226.1
0.438 140.2 185.5 215.6 147.1 192.4 222.6 154.0 199.3 229.5 161.0 206.2 236.4 167.9 213.1 243.3 174.8 220.1 250.2
0.500 154.1 205.7 240.0 160.9 212.5 246.8 167.7 219.2 253.6 174.5 226.0 260.4 181.2 232.8 267.1 188.0 239.6 273.9
ASTM A252 Pipe Piling Rolling Schedule
January February March April May June July August September October November December
Marseilles
Marseilles
Marseilles
Marseilles
Marseilles
Marseilles
Marseilles
Marseilles
Marseilles
Marseilles
Marseilles
Marseilles
Chicago
Chicago
Chicago
Chicago
Chicago
Chicago
Chicago
Chicago
Chicago
Chicago
Chicago
Chicago
Decatur
Decatur
Decatur
Decatur
Decatur
Decatur
Decatur
Decatur
Decatur
Decatur
Decatur
Decatur
Outer Pipe
Dimension Size
1.66" 1-1/4"
1.900" 1-1/2"
2.375" 2.00"
2.875" 2-1/2"
3.50" 3.00"
4.00" 3-1/2" C C C C C C
4.50" 4.00"
5.00" 4-1/2" C C C C C C
5.563" 5.00"
6.00" C C C C C C
6.625" 6.00" D D D D D D D D D D D D
8.625" 8.00" D D D D D D D D D D D D
10.750" 10.00" D D D D D D
12.750" 12.00" D D D D D D