Professional Documents
Culture Documents
Contents
2 Soil Testing Sets
1
Buyer’s Guide
Soil Testing: Sets 23010 to 24025
2
Buyer’s Guide
Soil Testing: Sets 24035 to 24145
Set 24035 Determination of liquid limit, cone Set 24105/1 Determination of particle density of fine to
penetrometer method, BS 1377 medium and coarse-grained soils, gas jar
24-0540 1 Cone Penetrometer method, BS 1377
24-0546 1 Test Gauge for checking condition of cone 24-2830 2 Gas Jar 75 mm dia x 300 mm
24-0548 1 Penetration Test Cup 24-2850/01 1 Mechanical End-Over-End Shaker
38-7120 1 Straight Edge 82-5010 1 Thermometer –10 to +50 x 0.5°C
81-0140 2 Spatula 200 mm blade Also required, but not part of the basic set:
81-0518 1 Timer Clock Set 24105/1/AR Also required products set
81-3000 10 Sample Container. 0.5 litre capacity. 1 78-1215/01 Drying Oven 50 litre capacity
82-2000 1 Evaporating Dish 150 mm dia x 45 mm depth 1 78-1245 Dial Thermometer 0 to 300°C
82-2500 1 Wash Bottle Polythene 500 ml 1 78-7090 Harvard Trip Balance 2000g capacity x 0.1g
24-0430 1 Glass Plate. 1 78-7110 Weight Set for 78-7090
Also required, but not part of the basic set: 1 78-7130 Footed Polypropylene Scoop
Set 23055/1
Set 24115/1 Determination of particle density of fine
Set 24045 Determination of plastic limit and plasticity soils, small pyknometer method, BS 1377,
index, BS 1377, ASTM D4318, AASHTO T90 ASTM D854, AASHTO T100
24-0811 1 Rod Comparator 24-2900 2 50 ml Density Bottle
81-0140 2 Spatula 200 mm blade 81-0375 2 Red Rubber Tubing H6.5 mm bore 5.0 mm wall
24-0430 2 Glass Plate 82-1000 1 Volumetric Flask 100 ml capacity with stopper
Also required, but not part of the basic set: 82-2100 1 Non-Vacuum Desiccator 200 mm internal dia.
Set 23055/1 82-2170 1 Vacuum Desiccator 250 mm internal diameter
82-2180 1 Safety Cage for Desiccator
Set 24055 Determination of shrinkage, volumetric 82-2500 1 Wash Bottle Polythene 500 ml
method, BS 1377 82-4005 1 Glass Rods 7 mm dia x 200 mm (pack of 10)
24-1010 1 Shrinkage Limit Apparatus 82-7091 1 Silica Gel, 6 – 16 mesh quantity 500 g
81-0500 1 Heavy Duty Rubber Gloves 82-7700 1 Filter Pump
81-4700 1 Stainless Steel Tray 305 mm dia. 82-8500/01 1 14 litre Water Bath with Digital Controller
82-0260 1 Beaker Cover 100 mm dia. Also required, but not part of the basic set:
79-7210 1 Sieve Brush double-ended Nylon Set 24115/1/AR Also required products set
Also required, but not part of the basic set: 1 78-1215/01 Drying Oven 50 litre capacity
Set 23055/1 1 78-1245 Dial Thermometer 0 to 300°C
1 78-5405/01 Electronic top loading balance
Set 24065 Determination of shrinkage, limit, 1 23-3000 Riffle Box, 7 mm slot width
volumetric method, BS 1377, ASTM D427,
AASHTO T92 Set 24125 Determination of particle density of non-
24-1500 1 Prong Plate cohesive soils up to 20 mm particle size,
24-1550 1 Shrinkage Dish large pyknometer method, BS 1377
24-1600 1 Glass Cup 24-2885 2 Pyknometer
38-7060 1 Glass Plate 100 mm sq. 82-4005 1 Glass Rods 7 mm dia x 200 mm, (pack of 10)
38-7120 1 Straight Edge 82-5010 1 Thermometer –10 to +50 x 0.5°C
81-0100 2 Spatula, 100 mm Blade Also required, but not part of the basic set:
81-4700 1 Stainless Steel Tray 305 mm dia. Set 24125/AR Also required products set
82-2000 2 Evaporating Dish 150 mm dia x 45 mm depth 1 78-1215/01 Drying Oven 50 Litre capacity
79-7210 1 Sieve Brush double-ended Nylon 1 78-1245 Dial Thermometer 0 to 300°C
82-0380 1 Measuring Cylinder 100 ml 1 78-7000 Dial-O-Gram Balance, 310g capacity x 10mg.
Also required, but not part of the basic set:
Set 23055/1 Set 24145 Particle size distribution, wet and dry
method, BS 1377
Set 24075 Determination of linear shrinkage, BS 1377 79-0010 1 200 mm dia Lid
24-1800 2 Shrinkage Mould to BS 1377 79-0020 1 200 mm dia Receiver
81-0100 2 Spatula, 100 mm blade 79-0070 1 200 mm dia BS Sieve 63 µm stainless steel mesh
81-0586 1 Vernier Callipers 79-0120 1 200 mm dia BS Sieve 150 µm stainless steel mesh
24-0430 1 Glass Plate 79-0140 1 200 mm dia BS Sieve 212 µm stainless steel mesh
25-8090 1 Silicon Grease Lubricant 79-0160 1 200 mm dia BS Sieve 300 µm stainless steel mesh
Also required, but not
part of the basic set: 79-0180 1 200 mm dia BS Sieve 425 µm stainless steel mesh
Set 24075/AR Also required products set 79-0200 1 200 mm dia BS Sieve 600 µm stainless steel mesh
1 78-1215/01 Drying Oven 50 litre capacity 79-0240 1 200 mm dia BS Sieve 1.18 mm stainless steel mesh
1 78-1245 Dial Thermometer 0 to 300°C 79-0270 1 200 mm dia BS Sieve 2.00 mm stainless steel mesh
79-0280 1 200 mm dia BS Sieve 2.36 mm stainless steel mesh
Set 24085/1 Determination of density, immersion in 79-2010 1 300 mm dia Lid
water, BS 1377 79-2020 1 300 mm dia Receiver
34-8100/01 1 Buoyancy Balance, 15 kg x 0.5 g 79-2300 1 300 mm dia BS Sieve 3.35 mm stainless steel mesh
34-8105 1 Cradle 79-2515 1 300 mm dia BS Sieve 5.00 mm perforated plate
81-0701 1 Wax Ladle 79-2525 1 300 mm dia BS Sieve 6.30 mm perforated plate
81-0703 1 Wax Brush 79-2555 1 300 mm dia BS Sieve 10.0 mm perforated plate
82-7031 4 Paraffin Wax in 5 kg block, MP 50-54°C 79-2575 1 300 mm dia BS Sieve 14.0 mm perforated plate
Also required, but not part of the basic set: 79-2595 1 300 mm dia BS Sieve 20.0 mm perforated plate
Set 23055/1 79-2615 1 300 mm dia BS Sieve 28.0 mm perforated plate
79-2640 1 300 mm dia BS Sieve 37.5 mm perforated plate
79-2655 1 300 mm dia BS Sieve 50.0 mm perforated plate
79-2670 1 300 mm dia BS Sieve 63.0 mm perforated plate
79-2680 1 300 mm dia BS Sieve 75.0 mm perforated plate
79-7200 1 Sieve Brush, Double Ended, Brass and Nylon Bristle
79-7210 1 Sieve Brush double-ended Nylon
81-0380 2 Rubber Tubing 8 mm Bore x 12 mm OD
81-4080 2 Sample Tray 610 x 610 x 63 mm
Continued
3
Buyer’s Guide
Soil Testing: Sets 24155/1 to 24205/1
4
Buyer’s Guide
Soil Testing: Sets 24215/1 to 24305
Set 24205/1 continued Set 24255/1 Determination of water- soluble and acid-
82-7091 1 Silica Gel, 6 – 16 mesh quantity 500 g soluble chloride content, BS 1377
Also required, but not part of the basic set: 24-2850/01 1 Mechanical End-Over-End Shaker
Set 24205/1/AR Also required products set 82-0200 2 Glass Beaker 600 ml squat form with spout
1 78-1215/01 Drying Oven 50 litre capacity 82-0460 1 Measuring Cylinder 500 x 5 ml soda glass, spouted
1 78-5447/01 Electronic top loading balance 82-1060 2 Volumetric Flask 1000 ml capacity with stopper
1 78-7350 10 kg x 1g Field and Laboratory Scale 82-1140 4 Conical Flask 250 ml capacity wide mouthed
1 23-3000 Riffle Box, 7 mm slot width 82-1260 1 25 ml Graduated Pipette
1 23-3070 Riffle Box, 15 mm slot width 82-1300 1 Bulb Pipette 50 ml capacity
1 79-0020 200 mm dia Receiver 82-1440 2 Burette 50 ml (Class B) with single bore stopcock
1 79-0180 200 mm dia BS Sieve 425 µm mesh 82-2100 1 Non-Vacuum Desiccator 200 mm internal diameter
1 79-0270 200 mm dia BS Sieve 2.00 mm mesh 82-2200 1 Buchner Funnel No. 5
1 82-5230 Thermometer –10 to +250 x 1°C 82-2500 1 Wash Bottle Polythene 500 ml
82-3060 1 Reagent Bottle, 1000 ml capacity
Set 24215/1 Determination of sulphate content, 82-3145 2 Polythene Bottle, wide neck screw cap, 1 litre
preparation of soil, acid extract, water 82-7091 1 Silica Gel, 6 – 16 mesh quantity 500 g
extract and groundwater, BS 1377 82-7931 1 Filter Paper, equivalent to Whatman No 50
78-2950/01 1 200 mm dia Hotplate 82-7901 1 Filter Paper No 74 equivalent to Whatman No 40
24-2850/01 1 Mechanical End-Over-End Shaker Also required, but not part of the basic set:
81-0094 1 Support Assembly Set 24255/1/AR Also required products set
81-0375 2 Red Rubber Tubing H6.5 mm bore 5.0 mm wall 1 78-1215/01 Drying Oven 50 litre capacity
82-0200 3 Glass Beaker 600 ml squat form with spout 1 78-5447/01 Electronic Top Loading Balance
82-0260 2 Beaker Cover 100 mm dia 1 78-7350 10 kg x 1g Field and Laboratory Scale
82-0276 4 500 ml Conical Beaker with glass cover 1 23-3000 Riffle Box, 7 mm slot width
82-0380 1 Measuring Cylinder 100 ml 1 23-3070 Riffle Box, 15 mm slot width
82-1240 1 10 ml Graduated Pipette 1 79-0020 200 mm dia Receiver
82-1260 1 25 ml Graduated Pipette 1 79-0120 200 mm dia BS Sieve 150 µm mesh.
82-1300 1 Bulb Pipette 50 ml capacity 1 79-0270 200 mm dia BS Sieve 2.00 mm mesh.
82-1540 2 Weighing Bottle 1 82-5230 Thermometer -10 to +250 x 1°C
82-2100 1 Non-Vacuum Desiccator 200 mm i.d.
82-2200 2 Buchner Funnel No. 5 Set 24265/1 Determination of total dissolved solids,
82-2340 2 Filter Flask 1000 ml BS 1377
82-2460 2 Extraction Flask, 250 ml capacity 78-2950/01 1 200 mm dia Hotplate
82-2500 1 Wash Bottle Polythene 500 ml 81-0375 2 Red Rubber Tubing H6.5 mm bore 5.0 mm wall
82-3300 2 Silica Crucible 35 mm dia 38 mm deep 82-1040 2 Volumetric Flask 500 ml capacity with stopper
82-4005 1 Glass Rods 7 mm dia x 200 mm, (pack of 10) 82-2000 2 Evaporating Dish 150 mm dia x 45 mm depth
82-7091 1 Silica Gel, 6 – 16 mesh quantity 500 g 82-2100 1 Non-Vacuum Desiccator 200 mm i.d.
82-7700 1 Filter Pump 82-2200 2 Buchner Funnel No. 5
82-7901 1 Filter Paper No 74 equivalent to Whatman No 40 82-2500 1 Wash Bottle Polythene 500 ml
82-7931 1 Filter Paper, equivalent to Whatman No 50 82-7091 1 Silica Gel, 6 – 16 mesh quantity 500 g
Also required, but not part of the basic set: 82-7700 1 Filter Pump
Set 24215/1/AR Also required products set 81-5020 1 Bowl, 2 litre capacity
1 78-1215/01 Drying Oven 50 litre capacity 82-2340 1 Filter Flask 1000 ml
1 78-2950/01 200 mm dia Hotplate 82-7931 1 Filter Paper, equivalent to Whatman No 50
1 78-5447/01 Electronic top loading balance Also required, but not part of the basic set:
1 78-7350 10 kg x 1g Field and Laboratory Scale Set 24265/1/AR Also required products set
1 23-3070 Riffle Box, 15 mm slot width 1 78-1215/01 Drying Oven 50 litre capacity
1 79-0010 200 mm dia Lid 1 78-5335/01 Analytical Electronic Balance 210 x 0.1mg
1 79-0020 200 mm dia Receiver 1 82-5230 Thermometer –10 to +250 x 1°C
1 79-0180 200 mm dia BS Sieve 425 µm mesh.
1 79-0270 200 mm dia BS Sieve 2.00 mm mesh. Set 24275 Determination of pH value BS 1377
1 82-5230 Thermometer -10 to +250 x 1°C 525-210/01 1 Laboratory pH meter
79-0020 1 200 mm dia Receiver
Set 24225/1 Determination of sulphate content, 79-0270 1 200 mm dia BS Sieve 2.00 mm stainless steel mesh.
gravimetric method, BS 1377 81-4700 1 Stainless Steel Tray 305 mm dia.
83-4160/01 1 1000°C Muffle Furnace 82-0120 3 Glass Beaker 100 ml capacity
82-3320 1 Porcelain Crucible 30 ml 82-0260 3 Beaker Cover 100 mm dia
82-3325 1 Porcelain Lid 82-1040 2 Volumetric Flask 500 ml capacity with stopper
Also required, but not part of the basic set: 82-2500 1 Wash Bottle Polythene 500 ml
Set 24215/1 82-4005 1 Glass Rods 7 mm dia x 200 mm, (pack of 10)
Set 24215/1/AR Also required, but not
part of the basic set:
Set 24275/AR Also required products set
Set 24245 Determination of carbonate content, rapid 1 78-5335/01 Analytical Electronic Balance 210 x 0.1mg
titration method, BS 1377 1 46-4821/80 Magnetic Stirrer
82-0260 1 Beaker Cover 100 mm dia
82-1120 1 Conical Flask 500 ml capacity, wide mouthed Set 24305 Dry density/moisture relationship, 2.5 kg
82-1140 1 Conical Flask 250 ml capacity wide mouthed rammer method, (for up to medium gravel
82-1260 1 25 ml Graduated Pipette size), BS 1377, 1924
82-1460 2 Burette 100 ml (Class B) with single bore stopcock 24-9000 1 BS Standard Compaction Mould
Also required, but not part of the basic set: 24-9002 1 Standard Compaction Rammer 2.5 kg
Set 24245/AR Also required products set 79-0020 1 200 mm dia Receiver
1 78-1215/01 Drying Oven 50 litre capacity 79-1595 1 200 mm dia BS Sieve 20.0 mm perforated plate
1 78-5447/01 Electronic top loading balance 79-1640 1 200 mm dia BS Sieve 37.5 mm perforated plate
1 23-3000 Riffle Box, 7 mm slot width 81-0100 1 Spatula, 100 mm Blade
1 23-3070 Riffle Box, 15 mm slot width 24-9010 1 Straight Edge, 300 mm
1 79-0020 200 mm dia Receiver 81-4160 1 Sample Tray 910 x 910 x 76 mm
1 79-0270 200 mm dia BS Sieve 2.00 mm mesh. Also required, but not part of the basic set:
1 82-1540 Weighing Bottle Set 24305/AR Also required products set
1 82-2100 Non-Vacuum Desiccator. 1 78-7350 10 kg x 1g Field and Laboratory Scale
1 82-5230 Thermometer –10 to +250 x 1°C 1 23-4200 Proctor/Core Cutter Extruder
Set 23055/1
5
Buyer’s Guide
Soil Testing: Sets 24315 to 24425/1
Set 24315 Dry density/moisture relationship 2.5 kg Set 24355 Moisture/density relationship of soils and
rammer method (for soils with some coarse soil-cement mixtures, ASTM D558, D698,
gravel), BS 1377 D1557, AASHTO T4,T99,T180
24-9002 1 Standard Compaction Rammer 2.5 kg 24-9060 1 Proctor Mould, 1/30 ft3
24-9198 1 BS CBR Mould Body 24-9063 1 ASTM Compaction Rammer 2.5 kg
24-9200 1 BS Extension Collar 24-9066 1 ASTM Compaction Mould, 152 mm
24-9204 2 BS Solid Base or Top Plate 24-9070 1 ASTM Compaction Rammer 4.5 kg
24-9208 2 C-Spanner for BS CBR Mould 81-0100 1 Spatula, 100 mm blade
24-9210 1 Base Plate Tool for BS Mould 24-9010 1 Straight Edge, 300 mm
79-0020 1 200 mm dia Receiver 81-4080 1 Sample Tray 610 x 610 x 63 mm
79-1595 1 200 mm dia BS Sieve 20.0 mm perforated plate Also required, but not part of the basic set:
79-1640 1 200 mm dia BS Sieve 37.5 mm perforated plate Set 24355/AR Also required products set
81-0100 1 Spatula, 100 mm blade 1 78-7090 Harvard Trip Balance 2000 g capacity x 0.1g
24-9010 1 Straight Edge, 300 mm 1 78-7110 Weight Set for 78-7090
81-4160 1 Sample Tray 910 x 910 x 76 mm 1 78-7130 Footed Polypropylene Scoop
Also required, but not part of the basic set: 1 78-7500 25 kg x 1g Field and Laboratory Scale
Set 24315/AR Also required products set 1 23-4250 CBR/Core Cutter Extruder
1 78-7500 25 kg x 1g Field and Laboratory Scale 1 23-4300 Adaptor Plate
1 23-4250 CBR/Core Cutter Extruder 1 79-5020 8 in. dia ASTM Sieve 4.75 mm mesh.
Set 23055/1 1 79-5400 8 in. dia Lid.
1 79-5410 8 in. dia Receiver.
Set 24325 Dry density/moisture relationship, 4.5 kg 1 79-5560 8 in. dia ASTM Sieve 19.0 mm mesh.
rammer method (for up to medium gravel 1 79-5630 8 in. dia ASTM Sieve 50.0 mm mesh.
size), BS 1377 1 81-0335 Trowel
24-9000 1 BS Standard Compaction Mould Set 23055/1
24-9004 1 BS Compaction Rammer
79-0020 1 200 mm dia Receiver Set 24385 Determination of maximum density of
79-1595 1 200 mm dia BS Sieve 20.0 mm perforated plate. sands, BS 1377
79-1640 1 200 mm dia BS Sieve 37.5 mm perforated plate. 79-0020 1 200 mm dia Receiver
81-0100 1 Spatula, 100 mm blade 79-0270 1 200 mm dia BS Sieve 2.00 mm stainless steel mesh
24-9010 1 Straight Edge, 300 mm 82-0500 1 Measuring Cylinder 1000 x 10 ml
81-4160 1 Sample Tray 910 x 910 x 76 mm Also required, but not part of the basic set:
Also required, but not part of the basic set: Set 24385/AR Also required products set
Set 24305/AR 1 78-0110/01 Soils Drying Oven 225 litre capacity
Set 23055/1 1 78-1245 Dial Thermometer 0 to 300°C
1 78-7140 Triple Beam Balance 2610g x 0.1g
Set 24335 Dry density/moisture relationship, 4.5 kg 1 78-7155 Scoop and Counterweight
rammer method (for soils with some coarse
gravel), BS 1377 Set 24395 Determination of minimum density of
24-9004 1 BS Compaction Rammer gravelly soils, BS 1377
24-9198 1 BS CBR Mould Body. 24-9198 1 BS CBR Mould Body
24-9200 1 BS Extension Collar 24-9200 1 BS Extension Collar
24-9204 2 BS Solid Base or Top Plate 24-9204 1 BS Solid Base or Top Plate
24-9208 2 C-Spanner for BS CBR Mould 79-0020 1 200 mm dia Receiver
24-9210 1 Base Plate Tool for BS Mould 79-1640 1 200 mm dia BS Sieve 37.5 mm perforated plate
79-0020 1 200 mm Dia Receiver 81-0220 1 Aluminium Scoop, large
79-1595 1 200 mm dia BS Sieve 20.0 mm perforated plate 24-9010 1 Straight Edge, 300 mm
79-1640 1 200 mm dia BS Sieve 37.5 mm perforated plate 81-4160 1 Sample Tray 910 x 910 x 76 mm
81-0100 1 Spatula, 100 mm blade 81-4160 1 Sample Tray 910 x 910 x 76 mm
24-9010 1 Straight Edge, 300 mm. Also required, but not part of the basic set:
81-4160 1 Sample Tray 910 x 910 x 76 mm Set 24395/AR Also required products set
Also required, but not part of the basic set: 1 78-0110/01 Soils Drying Oven 225 litre capacity
Set 24315/AR 1 78-1245 Dial Thermometer 0 to 300°C
Set 23055/1 1 78-7500 25 kg x 1g Field and Laboratory Scale
Set 24345/1 Dry density/moisture relationship, vibrating Set 24405/2 Maximum and minimum index density of
hammer method, BS 1377 soils, ASTM D4253, D4254
47-0455/01 1 Vibrating Hammer 81-0220 1 Aluminium Scoop, large
24-9025 1 Tamping Foot and Shank 300 mm 81-0518 1 Timer Clock
24-9198 1 BS CBR Mould Body 81-4040 1 Sample Tray 460 x 460 x 50 mm
24-9200 1 BS Extension Collar 81-4080 1 Sample Tray 610 x 610 x 63 mm
24-9204 2 BS Solid Base or Top Plate 78-5650/01 1 Electronic Platform Scale 60 kg x 10 g
24-9208 2 C-Spanner for BS CBR Mould 24-9010 1 Straight Edge, 300 mm
24-9210 1 Base Plate Tool for BS Mould 24-9112/06 1 Vibratory Table
34-0140 1 Steel Rule 300 mm 24-9114 1 Relative Density Mould Set 0.1 ft3
79-0020 1 200 mm dia Receiver 24-9116 1 Relative Density Mould Set 0.5 ft3
79-1640 1 200 mm dia BS Sieve 37.5 mm perforated plate. 24-9118 1 Relative Density Gauge Set
81-0220 1 Aluminium Scoop, large
81-0518 1 Timer Clock Set 24425/1 Determination of the CBR, laboratory
24-9010 1 Straight Edge, 300 mm method, penetration test, BS 1377
81-4160 1 Sample Tray 910 x 910 x 76 mm 78-0760 1 28 kN Clamped Boss Load Ring
Also required, but not part of the basic set: 24-9160/01 1 50 kN CBR Test Machine
Set 24315/AR 24-9182 1 Penetration Piston
Set 23055/1 24-9186 1 Penetration Dial Gauge
24-9188 1 Bracket and Adaptor
24-9214 1 2 kg Annular Surcharge Weight
24-9216 4 2 kg Split Surcharge Weight.
6
Buyer’s Guide
Soil Testing: Sets 24435 to 25015
Set 24435 Sample preparation for CBR by static Set 24475 Sample preparation for CBR by obtaining an
compression, BS 1377 undisturbed sample, BS 1377
24-9198 1 BS CBR Mould Body 24-9198 1 BS CBR Mould Body
24-9200 1 BS Extension Collar 24-9200 2 BS Extension Collar
24-9202 1 BS Perforated Base Plate 24-9202 1 BS Perforated Base Plate
24-9204 2 BS Solid Base or Top Plate 24-9204 2 BS Solid Base or Top Plate
24-9208 2 C-Spanner for BS CBR Mould 24-9206 1 CBR Cutting Collar
24-9210 1 Base Plate Tool for BS Mould 24-9208 2 C-Spanner for BS CBR Mould
24-9212 3 Static Compaction Plug. 24-9210 1 Base Plate Tool for BS Mould
34-0130 1 Tamping Rod 16 mm Dia x 600 mm long Set 24485/1 CBR, laboratory, ASTM D1883,
79-2020 1 300 mm dia Receiver AASHTO T193
79-2515 1 300 mm dia BS Sieve 5.00 mm perforated plate 78-0760 1 28 kN Clamped Boss Load Ring
79-2595 1 300 mm dia BS Sieve 20.0 mm perforated plate 24-9063 1 ASTM Compaction Rammer 2.5 kg
81-0140 1 Spatula 200 mm blade 24-9070 1 ASTM Compaction Rammer 4.5 kg
24-9010 1 Straight Edge, 300 mm 24-9160/01 1 50 kN CBR Test Machine
24-9220 1 Filter Papers 150 mm dia 24-9182 1 Penetration Piston
Also required, but not part of the basic set: 24-9184 2 Penetration/Swell Dial Gauge, ASTM
Set 24435/AR Also required products set 24-9188 1 Bracket and Adaptor
1 36-0671 Compact 1500 Hand-operated Compression 24-9228 1 ASTM CBR Mould
Machine 24-9238 1 ASTM Spacing Disc
1 78-7500 25 kg x 1g Field and Laboratory Scale 24-9240 4 Filter Screen 150 mm dia
Set 23055/1 24-9243 1 4.5 kg Annular Surcharge Weight ASTM
24-9244 4 5 lb (2.27 kg) Split Surcharge Weight
Set 24445 Sample preparation for CBR by dynamic 24-9260 1 Swell Plate
compaction, 2.5 kg rammer, BS 1377 24-9262 1 Swell Tripod
24-9010 1 Straight Edge, 300 mm.
24-9002 1 Standard Compaction Rammer 2.5 kg
24-9250 1 Filter Paper, equivalent to Whatman No 5
24-9198 1 BS CBR Mould Body Also required, but not part of the basic set:
24-9200 1 BS Extension Collar Set 24485/1/AR Also required product set
24-9204 2 BS Solid Base or Top Plate 1 24-9268 Soaking Tank.
24-9208 2 C-Spanner for BS CBR Mould Set 23055/1
24-9210 1 Base Plate Tool for BS Mould
79-0020 1 200 mm dia Receiver Set 24495 Expansion (swell) test, BS 1377
79-1595 1 200 mm dia BS Sieve 20.0 mm perforated plate 24-9275 1 Dial Gauge, 25 mm travel x 0.01 mm divisions
79-1640 1 200 mm dia BS Sieve 37.5 mm perforated plate 24-9198 1 BS CBR Mould Body
81-0100 1 Spatula, 100 mm blade 24-9200 1 BS Extension Collar
24-9010 1 Straight Edge, 300 mm 24-9202 1 BS Perforated Base Plate
81-4160 1 Sample Tray 910 x 910 x 76 mm 24-9260 1 Swell Plate
Also required, but not part of the basic set: 24-9262 1 Swell Tripod
Set 24315/AR 81-3540 1 Plastic Sample Container
Set 23055/1 Also required, but not part of the basic set:
Set 24485/1/AR
Set 24455 Sample preparation for CBR by dynamic
Set 24505 CBR, in-situ, ASTM D4429
compaction, 4.5 kg rammer, BS 1377
78-0460 1 10 kN Clamped Boss Load Ring
24-9004 1 BS Compaction Rammer, 4.5kg 78-0760 1 28 kN Clamped Boss Load Ring
24-9198 1 BS CBR Mould Body 24-9183 1 CBR Penetration Piston (adjustable)
24-9200 1 BS Extension Collar 24-9184 1 Penetration/Swell Dial Gauge, ASTM
24-9204 2 BS Solid Base or Top Plate 24-9188 1 Bracket and Adaptor
24-9208 2 C-Spanner for BS CBR Mould 24-9290 1 45 kN (10000 lb) Capacity Mechanical Jack
24-9210 1 Base Plate Tool for BS Mould 24-9300 1 Ball Seating for EL24-9290 45 kN Jack
79-0020 1 200 mm dia Receiver 24-9308 1 Set of Extension Rods
79-1595 1 200 mm dia BS Sieve 20.0 mm perforated plate 24-9312 1 Datum Bar Assembly
79-1640 1 200 mm dia BS Sieve 37.5 mm perforated plate 24-9320 1 10 lb (4.5 kg) Annular Surcharge Weight
81-0100 1 Spatula, 100 mm blade 24-9322 2 10 lb (4.5 kg) Slotted Surcharge Weight
24-9010 1 Straight Edge, 300 mm 24-9324 2 9.1 kg Slotted Surcharge Weight
81-4160 1 Sample Tray 910 x 910 x 76 mm 24-9298 1 Land Rover B racket
Also required, but not part of the basic set:
Set 24315/AR Set 24515 Determination of the CBR, in-situ, BS 1377
Set 23055/1 78-0760 1 28 kN Clamped Boss Load Ring
24-9183 1 CBR Penetration Piston (adjustable)
24-9186 1 Penetration Dial Gauge, BS
Set 24465/1 Sample preparation for CBR by vibrating
24-9188 1 Bracket and Adaptor
compaction, BS 1377 24-9290 1 45 kN (10000 lb) Capacity Mechanical Jack
47-0455/01 1 Vibrating Hammer 24-9300 1 Ball Seating for EL24-9290 45 kN Jack
24-9025 1 Tamping Foot and Shank 300 mm 24-9308 1 Set of Extension Rods
24-9198 1 BS CBR Mould Body 24-9312 1 Datum Bar Assembly
24-9200 1 BS Extension Collar 24-9320 1 10 lb (4.5 kg) Annular Surcharge Weight
24-9204 2 BS Solid Base or Top Plate 24-9322 3 10 lb (4.5 kg) Slotted Surcharge Weight
24-9208 2 C-Spanner for BS CBR Mould 24-9298 1 Land Rover B racket
24-9210 1 Base Plate Tool for BS Mould
34-0140 1 Steel Rule 300 mm. Set 25015 One-dimensional consolidation, BS 1377
79-0020 1 200 mm dia Receiver 25-0440 1 Dial Gauge 10 mm travel x 0.002 mm divisions
79-1640 1 200 mm dia BS Sieve 37.5 mm perforated plate 25-0402 1 Consolidation Frame
81-0220 1 Aluminium Scoop, large 25-0408 1 Set of Weights, 100 kg
81-0518 1 Timer Clock 25-0503 1 Consolidation Cell, 75 mm diameter sample
24-9010 1 Straight Edge, 300 mm 25-0509 1 Calibration Disc, 75 mm cell
81-4160 1 Sample Tray 910 x 910 x 76 mm 81-0518 1 Timer Clock
Also required, but not part of the basic set: Also required, but not
part of the basic set:
Set 25015/AR Also required product set
Set 24315/AR
1 25-0429 Floor Mounting Stand
Set 23055/1 Set 23055/1
7
Buyer’s Guide
Soil Testing: Sets 25025 to 25115/1
Set 25025 Permeability of soil, constant head Set 25085 Autographic unconfined compressive
permeameter, BS 1377 strength, BS 1377
25-0580 1 Constant Head Permeability cell 75 mm dia 23-4090 1 38 mm Hand Operated Hydraulic Sample Extruder
25-0591 1 Manometer Tubes and Stand 23-4120 1 38 mm Split Former.
25-0593 1 Constant Level Tank 23-4140 1 Cutting Tool
42-4580 1 Tamping Rod 8 mm dia x 300 mm 25-3625 1 Autographic Unconfined Compression Apparatus
81-0200 1 Aluminium Scoop, small 34-0140 1 Steel Rule 300 mm
81-0518 1 Timer clock 81-0586 1 Vernier Callipers
82-0380 1 Measuring Cylinder 100 ml 24-9010 1 Straight Edge, 300 mm
82-0460 1 Measuring Cylinder 500 x 5 ml soda glass, spouted Also required, but not part of the basic set:
82-1060 1 Volumetric Flask 1000 ml capacity with stopper Set 25075/AR
82-2660 1 Polythene Funnel 200 mm dia.
82-5010 1 Thermometer –10 to +50 x 0.5°C Set 25095/1 Determination of compressive undrained
Also required, but not part of the basic set: triaxial strength (QUTXL) 38 mm diameter
25025/AR Also required products set
samples, BS 1377
1 81-0375 Red Rubber Tubing
1 82-7720/01 Vacuum Pump 78-0060 1 2 kN Clamped Boss Load Ring
25-4120 1 Dial Gauge, 25 mm travel x 0.01 mm divisions.
Set 25035 Permeability of soil, falling head 25-3476/01 1 Tritest 10, 10 kN load frame, multi-speed drive.
permeameter 25-4047 1 50 mm Triaxial Cell 1700 kPa
25-0605 1 Falling Head Permeability cell. 25-4166 1 38 mm/1.5 inch Base Adaptor
25-0609 1 Standpipe Panel. 25-4290 1 Membrane Placing Tool 35 mm/38 mm
25-0611 1 De-Airing Tank. 25-5050 1 Pressure Pad, 38 mm/1.5 inch diameter
25-0613 1 Soaking Tank. 25-5061 1 Rubber Membrane 38 mm/1.5 inch dia. Pack of 10
81-0518 1 Timer clock 25-5081 1 Membrane Sealing Ring 38 mm/1.5 in. dia. Pack of 10
82-0380 1 Measuring Cylinder 100 ml 25-5100 1 Suction Membrane Device 38 mm/1.5 inch dia.
Also required, but not part of the basic set: Also required, but not part of the basic set:
Set 25025/AR Set 25095/1/AR Also required products set
1 26-1800/01 Pressure Test 1700
Set 25045 Determination of erodibility, pinhole 1 26-1815 Pressure Gauge 1700 kPa
method, BS 1377, ASTM D4647 10 26-1926 Nylon Tubing, 6 mm OD. Price per metre.
25-0675 1 Pinhole Dispersion Test Apparatus
42-4580 1 Tamping Rod 8 mm dia x 300 mm Set 25105/1 Determination of compressive undrained or
81-0518 1 Timer Clock drained triaxial strength (CU/CD) BS 1377
82-0290 2 10 ml capacity Measuring Cylinder 78-0260 1 4.5 kN Clamped Boss Load Ring, compression
82-0300 2 Measuring Cylinder 25 x 0.5 ml soda glass, spouted 25-4120 1 Dial Gauge, 25 mm travel x 0.01 mm divisions
82-0340 2 Measuring Cylinder 50 x 1 ml soda glass, spouted 25-3516/01 1 Digital Tritest 50
Also required, but not part of the basic set: 25-4047 1 50 mm Triaxial Cell 1700 kPa
Set 25045/AR Also required products set 25-4166 1 38 mm/1.5 inch Base Adaptor
1 79-0020 200 mm Dia Receiver 25-4290 1 Membrane Placing Tool 35 mm/38 mm
1 79-0270 200 mm dia BS Sieve 2.00 mm mesh 25-4520 2 Valve, no volume change 1/4 inch BSP
Set 23055/1 25-4540 1 10 ml Burette, single tube drainage
25-5050 1 Pressure Pad, 38 mm/1.5 inch diameter
Set 25055/1 Determination of the rate of consolidation
of soils using an ELE/Rowe-type hydraulic 25-5061 1 Rubber Membrane 38 mm/1.5 inch dia. Pack of 10
consolidation cell, BS 1377 25-5081 1 Membrane Sealing Ring 38 mm/1.5 in. dia. Pack of 10
25-0440 1 Dial Gauge 10 mm travel x 0.002 mm divisions 25-5100 1 Suction Membrane Device 38 mm/1.5 inch dia.
25-0705 1 ELE/Rowe cell, complete 151.4 mm dia. sample 25-5120 1 Two-Way Split Former, 38 mm/1.5 inch diameter
26-1865 1 Pressure Indicating Panel, 1700 kPa 25-5181 1 Porous Disc 38 mm/1.5 inch diameter. Pack of 2
26-1890 1 Twin-Burette Volume- Change Unit 25-5200 1 Filter Paper Drain 38 mm/1.5 inch dia. Pack of 50
27-1110/01 1 4 Channel Digital Pressure Readout Unit 27-1110/01 1 4 Channel Digital Pressure Readout Unit
27-1625 1 Pressure Transducer Assembly 1000 kPa 27-1625 1 Pressure Transducer Assembly 1000 kPa
26-1880 1 Universal Pump and Pressure Indicating Panel Also required, but not part of the basic set:
Also required, but not part of the basic set: Set 25105/1/AR Also required products set
Set 25055/1/AR Also required product set 1 25-1833/01 De-aired Water Apparatus
1 25-1833/01 De-aired Water Apparatus 1 26-1880 Universal Pump and Pressure Indicating Panel
Set 26015/1 1 26-1890 Twin-Burette Volume- Change Unit.
20 26-1926 Nylon Tubing, 6 mm OD. Price per metre.
Set 25060/1 Measurement of hydraulic conductivity of Set 26015/1
toxic permeant, 70 mm dia flexible wall
permeameter Set 25115/1 Integrated stress path system for 38 mm
25-0685/01 1 Tri-Flex 2 Single Cell Permeability Apparatus samples
25-0695 2 Pressure Interface Chamber for toxic permeants 25-9810 1 ELE Stress Path Cell complete with 4.5 kN
25-0695/10 1 70 mm Specimen Cap and Base Set Submersible Load Transducer
25-6441 1 Rubber Membrane 70 mm/2.8 inch dia. Pack of 10 25-9810/12 1 Vacuum Pad for ELE Stress Path Cell
25-6561 1 Porous Disc 70 mm diameter Pack of 2 25-9810/15 1 38 mm Base Adaptor for ELE Stress Path Cell
25-6461 1 Membrane Sealing Ring 70 mm dia. Pack of 10 25-9810/16 1 38 mm Pressure Pad for ELE Stress Path Cell
25-6470 1 Membrane Placing Tool 70 mm/2.8 inch diameter 25-9880 1 Pressure Control System.
25-6480 1 Suction Membrane Device 70 mm diameter 25-9885/01 1 ELE Stress Path Control System
Also required, but not part of the basic set: 25-9892 1 50 mm Axial Strain Transducer.
Set 25060/1/AR Also required products set 25-9896 1 Management Software Package
1 83-1735/01 Air Compressor Unit, 1000 kPa
26-1870 1 6-Way Water Distribution Panel for Oil/Water
1 26-1926 Nylon Tubing, 6 mm OD, 3500 kPa
Systems
Set 25075 Determination of unconfined compressive 26-1883 1 Vacuum Gauge
strength, BS 1377, ASTM D2166 27-1625 3 Pressure Transducer Assembly 1000 kPa
81-0518 1 Timer Clock 27-1635 1 Pressure Transducer Assembly 3500 kPa
81-0586 1 Vernier Callipers 27-1641 1 Volume Change Transducer Assembly 80 cm3
24-9010 1 Straight Edge, 300 mm Also required, but not part of the basic set:
25-3605 1 Unconfined Compression Tester Set 25115/1/AR Also required product set
Also required, but not part of the basic set: 1 83-1735/01 Air Compressor Unit, 1000 kPa
Set 25075/AR Also required products set 1 26-1769 Nylon Tubing 30 metre length.
1 78-7090 Harvard Trip Balance 1 25-1833/01 De-aired Water Apparatus
1 78-7110 Weight Set for 78-7090 1 27-1450/01 Pentium P233 PC System
1 78-7130 Footed Polypropylene Scoop
Set 23055/1
8
Buyer’s Guide
Soil Testing: Sets 25120/1 to 29075
Set 25120/1 Integrated stress path system for 38 mm Set 29045 Dry density in-situ, sand replacement
samples method, BS 1377, 1924
25-3516/01 1 Digital Tritest 50 29-4200 1 200 mm Sand Pouring Cylinder.
25-4117 1 70 mm Triaxial Cell 1700 kPa 29-4220 1 200 mm Calibrating Container
25-4172 1 Base Adaptor for 38 mm specimen 29-4240 1 Metal Tray, 500 mm sq x 50 mm deep
25-4290 1 Membrane Placing Tool 35 mm/38 mm 29-5000 1 Density Spoon.
25-5100 1 Suction Membrane Device 38 mm/1.5 inch dia. 29-5080 1 Metal Dibber Tool
25-5050 1 Pressure Pad, 38 mm/1.5 inch diameter. 29-5100 1 Scraper.
25-5061 1 Rubber Membrane 38 mm/1.5 inch dia. Pack of 10
29-5140 1 Steel Pointed Rod.
25-5081 1 Membrane Sealing Ring 38 mm/1.5 in. dia. Pack of 10
25-5181 1 Porous Disc 38 mm/1.5 inch diameter. Pack of 2. 81-4160 1 Sample Tray 910 x 910 x 76 mm
25-9881 1 Modified Pressure Control System 24-0430 1 Glass Plate.
25-9885/01 1 ELE Stress Path Control System comprising control 82-7401 1 Standard Sand 600-300 µm. Fraction
interface and integrated power supply
25-9896 1 Management Software Package Set 29055 Density of soil in place, sand cone method,
26-1870 1 6-Way Water Distribution Panel ASTM D1556, AASHTO T191
27-1293 1 Distance Piece 29-4300 1 6 Inch (152 mm) Sand Cone.
27-1573 1 Submersible Load Transducer Assembly, 5 kN 29-4320 1 5 Litre Plastic Container for Sand Cone.
27-1617 1 Axial Strain Transducer Assembly 50 mm travel 29-4340 1 Density Plate for EL29-4300.
27-1625 3 Pressure Transducer Assembly 1000 kPa 82-7401 1 Standard Sand 600-300 µm.
27-1641 1 Volume Change Transducer Assembly 80cm3 Also required, but not part of the basic set:
29055/AR Also required products set
Set 26015/1 Pneumatic pressure system for two 1 78-1215/01 Drying Oven 50 litre capacity
independent variable pressure sources 1 78-7090 Harvard Trip Balance
(700 kPa continuous pressure) 1 78-7110 Weight Set for 78-7090
83-1730/01 1 Air compressor Unit, 700 kPa working pressure 1 78-7130 Footed Polypropylene Scoop
26-1746 2 Bladder-type Air/Water Pressure Assembly 1 78-7350 10 kg x 1 g Field and Laboratory Scale
26-1760 1 Pneumatic Pressure Reducing Panel 1000 kPa
1 29-5000 Density Spoon
26-1769 1 Nylon Tubing 30 metre length.
1 29-5020 Soft Headed Mallet
Set 26045/1 Direct/residual shear test, 60 mm square 1 29-5060 Density Chisel
specimen, BS 1377 1 29-5120 Density Hand Pick
78-0160 1 3 kN Clamped Boss Load Ring, compression. 1 81-3060 Sample Container. 10 litre capacity
25-0440 1 Dial Gauge 10 mm travel x 0.002 mm divisions. 1 81-4020 Sample Tray 306 x 306 x 38 mm
26-2112/01 1 Digital Direct/Residual Shear Apparatus 1 82-5010 Thermometer –10 to +50 x 0.5°C
26-2132 1 Set of Weights, 50 kg slotted, uncalibrated
83-5456 1 Dial Gauge, 12 mm travel x 0.01 mm divisions Set 29065 Density of soil in place by the rubber balloon
26-2181 1 Shear Box Assembly, 60 mm square method, ASTM D2167, AASHTO T205
26-2185 1 Specimen Cutter, 60 mm square 29-4520 1 Balloon Density Apparatus
26-2189 1 Specimen Extrusion Tool, 60 mm square 29-4540 10 Flexible Balloon
29-4560 1 Density Plate
Set 26055/1 Direct shear test, 2.5 inch diameter 29-5000 1 Density Spoon
specimen, ASTM D3080 29-5060 1 Density Chisel
78-0060 1 2 kN Clamped Boss Load Ring, compression 29-5120 1 Density Hand Pick
25-0440 1 Dial Gauge 10 mm travel x 0.002 mm divisions 81-2979 20 Unnumbered Moisture Content Tin 90g capacity
26-2112/01 1 Digital Direct/Residual Shear Apparatus
81-3000 10 Sample Container. 0.5 litres capacity
26-2132 1 Set of Weights, 50 kg slotted, uncalibrated
83-5456 1 Dial Gauge, 12 mm travel x 0.01 mm divisions 81-3060 10 Sample Container. 10 litres capacity
26-2213 1 Shear Box Assembly, 2.5 inch diameter 81-4020 3 Sample Tray 306 x 306 x 38 mm
26-2217 1 Specimen Cutter 2.5 inch diameter. 81-4775 100 Polythene Bag
26-2221 1 Specimen Extrusion Tool, 2.5 inch diameter. 82-5010 1 Thermometer –10 to +50 x 0.5°C
Also required, but not part of the basic set:
Set 26065 Determination of shear strength by the Set 29065/AR Also required products set
laboratory vane method, BS 1377 1 78-1215/01 Drying Oven 50 litre capacity
26-2270 1 Laboratory Vane Apparatus 1 78-7090 Harvard Trip Balance
26-2289 1 Attachment 1 78-7110 Weight Set for 78-7090
34-0140 1 Steel Rule 300 mm 1 78-7130 Footed Polypropylene Scoop
81-0518 1 Timer clock 1 78-7500 25 kg x 1g Field and Laboratory Scale
Set 29015 Bearing capacity of soil for static load on Set 29075 Dry density in-situ, core-cutter method,
spread footings, 500 kN capacity, BS 1377
ASTM D1194, D1195, D1196 29-5300 3 Core Cutter
29-3794 1 500 kN Hydraulic Jack 29-5320 1 Driving Dolly for EL 29-5300
29-3808 1 Hand Operated Pressure System for 500 kN Jack.
29-5340 1 Driving Rammer for EL 29-5320
29-3818 1 Datum Bar Assembly.
29-3822 4 Dial Gauge, 50 mm travel x 0.01 mm divisions 34-0140 1 Steel Rule 300 mm
29-3826 1 Bearing Plate 150 mm dia. 81-0140 1 Spatula 200 mm blade
29-3834 1 Bearing Plate 305 mm dia. 24-9010 1 Straight Edge, 300 mm
29-3838 1 Bearing Plate 455 mm dia. Also required, but not part of the basic set:
29-3846 1 Bearing Plate 760 mm dia. Set 24305/AR
Set 23055/1
Set 29035 Dry density in-situ, sand replacement
method (suitable for cohesive soils),
BS 1377, 1924
29-4000 1 100 mm Sand Pouring Cylinder
29-4020 1 100 mm Calibrating Container
29-4040 1 Metal Tray, 300 mm sq. x 40 mm deep
29-5000 1 Density Spoon
29-5080 1 Metal Dibber Tool
29-5100 1 Scraper
29-5140 1 Steel Pointed Rod
81-4700 1 Stainless Steel Tray 305 mm dia
24-0430 1 Glass Plate
82-7401 1 Standard Sand 600-300 µm.
9
Buyer’s Guide
Concrete Testing: Sets 34015 to 34215
10
Buyer’s Guide
Concrete Testing: Sets 34225 to 36060/1
Set 34225 Making test beams from fresh concrete: Set 34325/1 Sulphur capping 100 mm hardened cylinders
100 x 100 x 500 mm, BS 1881-108 and cores, BS 1881-110 and -120
34-2910 1 Compacting Bar 25 mm sq x 380 mm 34-6031 1 Cylinder Capping Frame
34-5000 6 100 x 100 x 500 mm Beam Mould. 34-6050 1 Capping Plate for 100 mm specimens, ASTM C617
34-5275 2 Spanner for cube beam cylinder moulds 34-6090 1 Capping Plate for 150 mm specimens, ASTM C617
81-0220 1 Aluminium Scoop, large 81-0701 1 Wax Ladle
81-0340 1 Plasterers Steel Float 34-6120/01 1 Melting Pot for use with Capping Compound
81-0705 1 Wire Brush 34-6100 1 Flake Capping Compound
82-7341 1 Mould Oil (25 litre drum)
Also required, but not part of the basic set: Set 34345/1 Normal curing of test specimens,
Set 34195/AR (20°C method), BS 1881-111
Set 34015 34-6545/01 1 Large Curing Tank
34-6690 1 Removable Lower Rack for Large Curing Tank.
Set 34235 Making test cylinders from fresh concrete: 82-5315 1 Max-Min Thermometer –20 to +50°C (–10 to +130°F)
150 mm diameter x 300 mm, Also required, but not part of the basic set:
BS 1881-110 Set 34345/1/AR Also required products set
34-5260 6 150 mm dia Cylinder Mould 300 mm long 1 34-6600 Steel Stand for Curing Tank
34-2910 1 Compacting Bar 25 mm sq x 380 mm 1 34-6710 Set of Eight Upper Racks
81-0340 1 Plasterers Steel Float
81-0705 1 Wire Brush Set 34375 Determination of drying, shrinkage and
82-7341 1 Mould Oil (25 litre drum) moisture movement, BS 1881
81-0220 1 Aluminium Scoop, large 34-2910 1 Compacting Bar 25 mm sq x 380 mm
Also required, but not part of the basic set: 34-8500 1 Drying Shrinkage and Moisture Movement Apparatus
Set 34195/AR 34-8515 1 BS Length Comparator 300 mm long
Set 34015 34-8538 1 Prism Mould 75 x 75 x 254 mm
34-8541 5 Steel inserts for EL34-8538 (Pack of 10)
Set 34245 Making test cylinders from fresh concrete: Also required, but not part of the basic set:
150 mm diameter x 150 mm, Set 34375/AR Also required products set
BS 1881-110 1 34-6755/01 Small Curing Tank
34-2910 1 Compacting Bar 25 mm sq x 380 mm 1 78-4200/01 Moisture Conditioning Oven
34-5230 6 150 mm dia Cylinder Mould 150 mm long
34-5275 2 Spanner for cube beam cylinder moulds Set 35395/1 Determination of total absorption,
81-0220 1 Aluminium Scoop, large BS 1881-122
81-0340 1 Plasterers Steel Float 78-1235/01 1 250°C Fan Circulated Oven
81-0705 1 Wire Brush 78-1245 1 Dial Thermometer 0 to 300°C
82-7341 1 Mould Oil (25 litre drum) 78-7250 1 5 kg Field and Laboratory Scale with Flat Pan
Also required, but not part of the basic set: 34-6755/01 1 Small Curing Tank
Set 34195/AR 82-2110 1 Desiccator Cabinet Non-vacuum
Set 34015 82-7091 2 Silica Gel, 6–16 mesh quantity 500 g
Also required, but not part of the basic set:
Set 34255 Making test cylinders from fresh concrete: Set 35395/1/AR Also required products set
100 mm diameter x 200 mm, 1 47-5160 Concrete Core Drill, petrol driven
BS 1881-110 1 47-5525 75 mm Core Barrel solid back end type
34-2910 1 Compacting Bar 25 mm sq x 380 mm (Adaptor required for use with ELE Core Drills pre July
34-5210 6 100 mm dia Cylinder Mould 200 mm long 1999. Currently using expander coupling)
34-5275 2 Spanner for cube beam cylinder moulds
81-0220 1 Aluminium Scoop, large Set 35405 Determination of initial surface absorption
81-0340 1 Plasterers Steel Float (ISAT), BS 1881-208
81-0705 1 Wire Brush 35-3985 1 Reservoir, Capillary Tube and Scale
82-7341 1 Mould Oil (25 litre drum) 35-3989 1 Cap for Smooth Horizontal Surfaces
Also required, but not part of the basic set: 81-0518 1 Timer Clock
Set 34195/AR Also required, but not part of the basic set:
Set 34015 Set 35405/AR Also required products set
1 78-1215/01 Drying Oven 50 litre capacity
Set 34265 Making/curing concrete specimens 1 78-1245 Dial Thermometer 0 to 300°C .
ASTM C231,C192, AASHTO T23,T126 1 82-2110 Desiccator Cabinet Non-vacuum.
34-0130 1 Tamping Rod 16 mm Dia x 600 mm long 1 82-7091 Silica Gel, 6 – 16 mesh quantity 500 g
34-5000 3 100 x 100 x 500 mm Beam Mould
34-5050 3 150 x 150 x 750 mm Beam Mould Set 35410 Determination of concrete impermeability,
34-5275 2 Spanner for cube beam cylinder moulds DIN 1048
81-0340 2 Plasterers Steel Float 35-4000 1 Concrete Impermeability Apparatus
81-0705 1 Wire Brush 35-4000/13 3 Steel Spacer 200 x 200 x 80 mm
81-4080 1 Sample Tray 610 x 610 x 63 mm 34-4620 3 200 mm Cube Mould, clamp type
82-7341 1 Mould Oil (25 litre drum)
34-5260 6 150 mm dia Cylinder Mould 300 mm long Set 36015/1 Standard concrete cube and cylinder
Also required, but not part of the basic set: compression testing of 100 mm and
Set 34265/AR Also required products set 150 mm specimens
1 78-7500 25 kg x 1g Field and Laboratory Scale 36-0691/01 1 Compact 1500 Standard Compression Machine
1 34-3530/01 ELE Concrete Mixer, 56 dm3 capacity 37-5000 1 Standard Distance Piece 50 mm effective height
1 34-6260/01 Vibrating Table 1250 x 625 mm Table Top 37-5050 1 Standard Distance Piece, 80 mm effective height
1 34-6545/01 Large Curing Tank 37-5100 1 Standard Distance Piece 100 mm effective height
1 34-6690 Removable Lower Rack for Curing Tank
Set 34025 Set 36060/1 Compression Testing of 150 mm Cubes and
Set 34165 Flexural Testing of Beams, Kerbs, Blocks and
Set 34315/1 Flags BS 340, 368,1881
36-3276/01 1 ADR 2000 BS Compression Machine
Set 34315/1 Sulphur capping 150 mm hardened cylinders 37-5170 1 Distance Piece to BS1881, 80 mm effective height
and cores, BS 1881-110 and -120 37-5180 1 Distance Piece to BS1881, 100 mm effective height
34-6031 1 Cylinder Capping Frame 37-6138 1 100 kN Flexural Fitting Kit (ADR)
34-6051 1 Capping Plate, BS1881, for 100 mm specimens 37-6140 1 100 kN Flexural and Transverse (Flags) Frame
34-6091 1 Capping Plate, BS1881, for 150 mm specimens 37-6330 1 Set of 4 Roller Bearers, BS1881
81-0701 1 Wax Ladle 37-6360 1 Upper Bearer and pair of self aligning Lower Steel
34-6120/01 1 Melting Pot for use with Capping Compound Bearers
34-6100 1 Flake Capping Compound
11
Buyer’s Guide
Cement Testing: Sets 38015 to 38175
12
Buyer’s Guide
Cement Testing: Sets 38195/1 to 39015/1
Set 38195/1 Heat of hydration of Portland cement, Set 38305/1 Air content of hydraulic cement mortar,
BS 4550-3 ASTM C185
23-3505 1 Mortar and Pestle, porcelain 29-5000 1 Density Spoon
23-3710/01 1 Melting Pot 2.3 litre capacity 38-6000 1 BS/ASTM Flow Table Top
38-4600/01 1 Heat of Hydration Apparatus 38-6020 1 Tripod for Flow Table
79-0020 1 200 mm dia Receiver 38-6040 1 BS/ASTM Flow Mould
79-0140 1 200 mm dia BS Sieve 212 µm stainless steel mesh 38-6060 1 Baseplate for Flow Table
79-0220 1 200 mm dia BS Sieve 850 µm stainless steel mesh 38-6080 1 Callipers
81-0100 1 Spatula, 100 mm blade 38-6100/01 1 Motor Unit for use with EL38-6020
81-0518 1 Timer Clock 38-6160 1 Plastic Tamper
82-1540 5 Weighing Bottle 38-7100 1 Brass Measure 400 ml ASTM C185
82-2100 1 Non-Vacuum Desiccator 38-7120 1 Straight Edge
82-7031 1 Paraffin Wax in 5 kg block 79-5120 1 8 inch dia ASTM Sieve 850 µm stainless steel mesh
82-7091 1 Silica Gel, 6–16 mesh quantity 500g 79-5140 1 8 inch dia ASTM Sieve 600 µm stainless steel mesh
79-7210 1 Sieve Brush double-ended nylon. 79-5410 1 8 inch dia Receiver
Also required, but not part of the basic set: 82-0420 1 Measuring Cylinder 250 x 2 ml soda glass, spouted
Set 38195/1/AR Also required products set 81-0140 1 Spatula, 200 mm blade
1 78-1215/01 Drying Oven 50 litre Capacity Also required, but not part of the basic set:
1 78-5335/01 Analytical Electronic Balance Set 38305/1/AR Also required products set
1 83-4160/01 1000°C Muffle Furnace 1 78-7090 Harvard Trip Balance 2000 g
1 78-7110 Weight Set for 78-7090
Set 38215/1 Heat of hydration of cement, ASTM C186
1 78-7130 Footed Polypropylene Scoop
23-3505 1 Mortar and Pestle, porcelain
1 82-7451 Standard Sand 850/600 µm, (50 kg)
23-3710/01 1 Melting Pot 2.3 litre capacity
38-4600/01 1 Heat of Hydration Apparatus
Set 38340/1 Determination of moisture content,
24-4130/01 1 High Speed Stirrer
79-5120 1 8 dia ASTM Sieve 850 µm stainless steel mesh BS 3892-1
79-5220 1 8 dia ASTM Sieve 150 µm stainless steel mesh 81-0100 1 Spatula, 100 mm blade
79-5410 1 8 dia Receiver 81-2979 10 Unnumbered Moisture Content Tin 90g capacity.
81-0100 1 Spatula, 100 mm blade 82-2100 1 Non-Vacuum Desiccator 200 mm internal diameter
81-0518 1 Timer Clock 82-7091 1 Silica Gel, 6–16 mesh, quantity 500g
82-1540 5 Weighing Bottle 78-1215/01 1 Drying Oven 50 litre capacity
82-2100 1 Non-Vacuum Desiccator Also required, but not part of the basic set:
82-7031 1 Paraffin Wax in 5 kg block Set 38035/1/AR
82-7091 1 Silica Gel, 6–16 mesh quantity 500 g
79-7210 1 Sieve Brush, double-ended nylon Set 38350/1 Determination of water requirement,
Also required, but not part of the basic set: BS 3892-1
Set 38195/1/AR 39-0031/01 1 Automatic / Manual Mortar Mixer 5 litre capacity
39-0065 1 Scraper, pack of 5
Set 38235 Consistence of mortars, dropping ball 39-1170 3 Standard Sand, graded pack for mortar prisms
method, BS 4551-1 and 6463-4 Also required, but not part of the basic set:
38-5000 1 Dropping Ball Apparatus Set 25075/AR
38-5005 2 Brass Mould 100 mm dia x 25 mm. Set 38265/1
38-5200 1 Ball Penetration Measuring Apparatus
81-0335 1 Trowel, gauging to BS 4550 Set 38360 Fineness of fly ash (PFA) by wet sieving,
EN 451; ASTM C115, C430
Set 38245 Consistence retentivity and water 38-7600 1 Spray Nozzle Apparatus
retentivity, BS 4551-1 and 6463-4 38-7600/11 1 Pressure Gauge 160 kPa x 5 kPa
38-5005 1 Brass Mould 100 mm dia x 25 mm 38-7600/12 1 45 µm Sieve, stainless steel mesh 50 mm i.d.
38-5500 1 2 kg Iron Weight
38-5520 1 Non Porous Plate 110 mm dia. Set 38370/1 Determination of pozzolanic activity index
38-5540 5 White Cotton Gauze, 1m square. EN 450; BS 3892-1
81-0140 1 Spatula, 200 mm blade 39-0031/01 1 Automatic/Manual Mortar Mixer 5 litre capacity
39-0065 1 Scraper, pack of 5
Set 38265/1 Flow of mortars and hydraulic cement, 39-1100 2 Three Gang Mould for 40.1 x 40 x 160 mm prisms
BS 4551, ASTM C230 39-1120 1 Feeding Hopper
38-6000 1 BS/ASTM Flow Table Top 39-1130 1 Scraper
38-6020 1 Tripod for Flow Table 39-1150/01 1 Jolting Table
38-6040 1 BS/ASTM Flow Mould 39-1170 3 Standard Sand, graded pack for Mortar Prisms
38-6060 1 Baseplate for Flow Table 39-6150/01 1 ADR-Auto 250 Compression Machine
38-6080 1 Callipers 39-5600 1 Compression Frame Jig Assembly without platens
38-6100/01 1 Motor Unit for use with EL38-6020 39-5600/10 1 40 mm Square Platen Set
38-6160 1 Plastic Tamper Also required, but not part of the basic set:
Set 25075/AR
Set 38275 Flow of building limes, BS 6463-4
38-6020 1 Tripod for Flow Table Set 39015/1 Preparation of 70.7 mm mortar cubes,
38-6060 1 Baseplate for Flow Table BS 4550-3
38-6200 1 Flow Table Top to BS 6463 34-6755/01 1 Small Curing Tank
38-6220 1 Mould to BS 6463 Part 4 39-0100 6 70.7 mm Cube Mould
39-0200/01 1 Vibrating Machine for 70.7 mm cube moulds
Set 38295 Air content of freshly- mixed mortars, 81-0335 2 Trowel, gauging to BS 4550
density method, BS 4551-1 81-0705 1 Wire Brush
38-7000 1 Brass Measure 500 ml BS 4551 82-7341 1 Mould Oil (25 litre drum)
38-7060 1 Glass Plate 100 mm sq 82-7451 1 Standard Sand 850/600 µm, (50 kg)
38-7080 1 Hard Plastic Tamper
38-7120 1 Straight Edge
81-0140 1 Spatula, 200 mm blade
Also required, but not part of the basic set:
Set 38295/AR Also required products set
1 78-7140 Triple Beam Balance 2610g x 0.1g
1 39-0031/01 Automatic / Manual Mortar Mixer
13
Buyer’s Guide
Cement and Aggregate Testing: Sets 39025/1 to 42065
14
Buyer’s Guide
Aggregate Testing: Sets 42075 to 42195/1
Set 42075 Sieve analysis, Set 42115 Determination of the shape index of
ASTM C33, C136, AASHTO T27 aggregate
79-5020 1 8 in. dia ASTM Sieve 4.75 mm stainless steel mesh 81-0588 1 Vernier Calliper, range 0 to 200 mm x 0.02 mm
79-5060 1 8 in. dia ASTM Sieve 2.36 mm stainless steel mesh 42-0821 1 3.1 Shape Index Calliper
79-5100 1 8 in. dia ASTM Sieve 1.18 mm stainless steel mesh 81-4020 1 Sample Tray 306 x 306 x 38 mm
79-5140 1 8 in. dia ASTM Sieve 600 µm stainless steel mesh
79-5180 1 8 in. dia ASTM Sieve 300 µm stainless steel mesh Set 42155/1 Particle density and water absorption of
79-5220 1 8 in. dia ASTM Sieve 150 µm stainless steel mesh aggregate between 63 mm and 5 mm,
79-5260 1 8 in. dia ASTM Sieve 75 µm stainless steel mesh BS 812
79-5400 1 8 in. dia Lid 42-1000/01 1 6 kg x 0.1g Buoyancy Balance
79-5410 1 8 in. dia Receiver 81-3060 1 Sample Container. 10 litre capacity
79-5510 1 8 in. dia ASTM Sieve 9.50 mm stainless steel mesh 81-4020 1 Sample Tray 306 x 306 x 38 mm
79-5530 1 8 in. dia ASTM Sieve 12.5 mm stainless steel mesh 42-1005 1 Wire Basket, brass with handle
79-5560 1 8 in. dia ASTM Sieve 19.0 mm stainless steel mesh Also required, but not part of the basic set:
Set 42155/1/AR Also required products set
79-6150 1 12 in. dia Lid ASTM
1 78-0110/01 Soils Drying Oven 225 litre capacity
79-6160 1 12 in. dia Receiver ASTM
1 23-3350 Riffle Box, 64 mm slot width
79-6280 1 12 in. dia ASTM Sieve 25.0 mm stainless steel mesh 1 79-0010 200 mm dia Lid
79-6310 1 12 in. dia ASTM Sieve 37.5 mm stainless steel mesh 1 79-0020 200 mm dia Receiver
79-6330 1 12 in. dia ASTM Sieve 50.0 mm stainless steel mesh 1 79-1515 200 mm dia BS Sieve 5.00 mm perf. plate
79-6350 1 12 in. dia ASTM Sieve 63.0 mm stainless steel mesh 1 79-1555 200 mm dia BS Sieve 10.0 mm perf. plate
79-6360 1 12 in. dia ASTM Sieve 75.0 mm stainless steel mesh 1 79-1595 200 mm dia BS Sieve 20.0 mm perf. plate
79-7210 1 Sieve Brush double-ended Nylon 1 79-1640 200 mm dia BS Sieve 37.5 mm perf. plate
Also required, but not part of the basic set: 1 79-1655 200 mm dia BS Sieve 50.0 mm perf. plate
Set 29065/AR 1 79-1670 200 mm dia BS Sieve 63.0 mm perf. plate
1 82-5010 Thermometer –10 to +50 x 0.5°C
Set 42085 Materials finer than 75 µm sieve in
mineral aggregate by washing, Set 42165/1 Specific gravity and absorption of coarse
ASTM C117, AASHTO T11 aggregate, ASTM C127
45-2040 1 7000 ml Steel Bottle with Stopper No. 71 42-1000/01 1 6 kg x 0.1g Buoyancy Balance
79-5100 1 8 in. dia ASTM Sieve 1.18 mm stainless steel mesh 79-5020 1 8 in. dia ASTM Sieve 4.75 mm stainless steel mesh
79-5260 1 8 in. dia ASTM Sieve 75 µm stainless steel mesh 81-4020 1 Sample Tray 306 x 306 x 38 mm
79-5400 1 8 in. dia Lid 42-1005 1 Wire Basket
79-5410 1 8 in. dia Receiver
81-4020 1 Sample Tray 306 x 306 x 38 mm Set 42175/1 Particle density and water absorption of
Also required, but not part of the basic set: aggregate 20 mm and smaller (gas jar
Set 29065/AR method), BS 812
78-2450/01 1 Warm Air Drying Unit
Set 42105 Determination of flakiness and elongation, 78-5475/01 1 Electronic Top Loading Balance 10000 x 0.5g
BS 812 24-2830 2 Gas Jar 75 mm dia x 300 mm
42-0410 1 Flakiness Gauge 42-1720 1 Tamping Rod
42-0670 1 Flakiness Sieve 4.9 mm wide slot 81-4700 2 Stainless Steel Tray 305 mm dia
42-0680 1 Flakiness Sieve 7.2 mm wide slot Also required, but not part of the basic set:
42-0700 1 Flakiness Sieve 10.2 mm wide slot Set 42175/1/AR Also required products set
1 78-0110/01 Soils Drying Oven 225 litre capacity
42-0710 1 Flakiness Sieve 14.4 mm wide slot
1 23-3170 Riffle Box, 30 mm slot width
42-0720 1 Flakiness Sieve 19.7 mm wide slot
1 42-1700 Sand Absorption Cone
42-0730 1 Flakiness Sieve 26.3 mm wide slot 1 79-0010 200 mm dia Lid
42-0740 1 Flakiness Sieve 33.9 mm wide slot 1 79-0020 200 mm dia Receiver
42-0820 1 Length Gauge 1 79-0080 200 mm dia BS Sieve 75 µm mesh
Also required, but not part of the basic set: 1 79-0240 200 mm dia BS Sieve 1.18 mm mesh
Set 42105/AR Also required products set 1 79-1515 200 mm dia BS Sieve 5.00 mm perf. plate
1 78-0110/01 Soils Drying Oven 225 litre capacity 1 79-1555 200 mm dia BS Sieve 10.0 mm perf. plate
1 78-1245 Dial Thermometer 0 to 300°C 1 79-1595 200 mm dia BS Sieve 20.0 mm perf. plate
1 81-4030 Oven Tray 406 mm sq, 50 mm deep. 1 82-5010 Thermometer –10 to +50 x 0.5°C
1 78-7090 Harvard Trip Balance 2000 g
1 78-7110 Weight Set for 78-7090 Set 42185 Specific gravity and absorption of fine
1 78-7130 Footed Polypropylene Scoop aggregates, ASTM C128, AASHTO T84
1 78-7350 10 kg x 1g Field and Laboratory Scale 24-2885 1 Pyknometer
42-1700 1 Sand Absorption Cone
Set 42110 Determination of flakiness, 42-1720 1 Tamping Rod
EN 933-6; AFNOR P18-561 81-4020 1 Sample Tray 306 x 306 x 38 mm
42-0752 1 Grid Sieve, 31.5 mm slot width Also required, but not part of the basic set:
42-0754 1 Grid Sieve, 25 mm slot width Set 42185/AR Also required products set
42-0756 1 Grid Sieve, 20 mm slot width 1 78-0110/01 Soils Drying Oven 225 litre capacity
42-0758 1 Grid Sieve, 16 mm slot width 1 78-2450/01 Warm Air Drying Unit
42-0760 1 Grid Sieve, 12.5 mm slot width 1 78-7090 Harvard Trip Balance 2000 g
42-0762 1 Grid Sieve, 10 mm slot width 1 78-7110 Weight Set for 78-7090
42-0764 1 Grid Sieve, 8 mm slot width 1 78-7130 Footed Polypropylene Scoop
42-0766 1 Grid Sieve, 6.3 mm slot width
42-0768 1 Grid Sieve, 5 mm slot width Set 42195/1 Particle density of fillers, BS 812
42-0770 1 Grid Sieve, 4 mm slot width 24-2900 6 50 ml Density Bottle
42-0772 1 Grid Sieve, 3.15 mm slot width, 81-0180 1 Chattaway Spatula
42-0774 1 Grid Sieve, 2.5 mm slot width 81-0375 2 Red Rubber Tubing H6.5 mm bore 5.0 mm wall
82-2170 1 Vacuum Desiccator
Also required, but not part of the basic set:
82-2180 1 Safety Cage for Desiccator
Set 42110/AR Also required products set
82-2260 1 Glass Funnel 110 mm dia
1 78-1215/01 Drying Oven 50 litre capacity 82-7091 1 Silica Gel, 6–16 mesh quantity 500 g
1 78-1245 Dial Thermometer 0 to 300°C 82-7700 1 Filter Pump
1 78-5456/01 Electronic Top Loading Balance 82-8500/01 1 14 litre Water Bath with Digital Controller
Also required, but not part of the basic set:
Set 38035/1/AR
15
Buyer’s Guide
Aggregate Testing: Sets 42215 to 42305/1
Set 42215 Determination of bulk density of aggregates, Set 42275 Acid soluble material in fine aggregates,
BS 812 BS 812-119
34-0130 1 Tamping Rod 16 mm dia x 600 mm long 23-3050 1 Riffle Box, 13 mm slot width
34-2800 1 Bulk Density Measure, 30 dm3 capacity 79-0010 1 200 mm dia Lid
34-2820 1 Bulk Density Measure, 15 dm3 capacity 79-0020 1 200 mm dia Receiver
79-0200 1 200 mm dia BS Sieve 600 µm stainless steel mesh
42-1995 1 Bulk Density Measure 3 litre 79-1515 1 200 mm dia BS Sieve 5.00 mm perforated plate
42-2000 1 Bulk Density Measure, 7 dm3 82-2000 2 Evaporating Dish 150 mm dia x 45 mm depth
Also required, but not part of the basic set: 82-2100 1 Non-Vacuum Desiccator 200 mm internal diameter
A scale or balance accurate to 0.2% of the weight of the material to be 82-2200 2 Buchner Funnel No. 5
weighed (this will vary according to the size of container used) 82-2500 2 Wash Bottle Polythene 500 ml
82-7091 1 Silica Gel, 6 – 16 mesh quantity 500g
Set 42225 Determination of the unit weight of 82-7901 1 Filter Paper No 74 equivalent to Whatman No 40
aggregate, ASTM C29 82-0380 1 Measuring Cylinder 100 ml
82-2340 1 Filter Flask 1000 ml
34-0130 1 Tamping Rod 16 mm dia x 600 mm long Also required, but not part of the basic set:
34-2850 1 Bulk density measure 1/10 ft3 Set 42275/AR Also required products set
34-2852 1 Bulk density measure 1/3 ft3 1 78-1215/01 Drying Oven 50 litre capacity
38-2854 1 Bulk density measure 1/2 ft3 1 78-1245 Dial Thermometer 0 to 300°C
34-2856 1 Bulk density measure 1ft3 1 78-2950/01 Hotplate, 200 mm dia
Also required, but not part of the basic set:
Set 34140/AR Set 42278 Testing and Classifying drying shrinkage of
aggregates in concrete, BS 812-120
A scale or balance accurate to 0.1% of the weight of the material to be 34-8500 1 Drying Shrinkage and Moisture Movement Apparatus
weighed (this will vary according to the size of container used) 34-8509 1 BS Length Comparator 205 mm long
34-8541 1 Steel inserts for EL34-8538 (Pack of 10)
Set 42235 Bulk density of filler in kerosene, BS 812 42-2970 1 Three-Gang Prism Mould, prisms 200x50x50 mm
82-0380 2 Measuring Cylinder 100 ml
82-2100 1 Non-Vacuum Desiccator Set 42285 Detection of organic impurities in sands for
82-7091 1 Silica Gel, 6–16 mesh quantity 500 g concrete, ASTM C40
Also required, but not part of the basic set: 42-3000 3 Glass Bottle approx. 300 ml
42-3040 1 Colour Standard to ASTM C40
Set 24125/AR 82-3060 1 Reagent Bottle, 1000 ml capacity
82-7141 1 Sodium Hydroxide Pellets 500 g
Set 42245 Determination of chloride content, BS 812
79-2010 1 300 mm dia Lid Set 42295/1 The effect of organic impurities in fine
79-2020 1 300 mm dia Receiver aggregates on strength of mortar,
79-2595 1 300 mm dia BS Sieve 20.0 mm perforated plate ASTM C87, AASHTO T71
81-0094 1 Support Assembly 37-5000 1 Standard Distance Piece 50 mm effective height
82-0460 1 Measuring Cylinder 500 x 5 ml soda glass, spouted 37-5020 1 Standard Distance Piece 60 mm effective height
39-5600 1 Compression Frame Jig Assembly
82-1060 2 Volumetric Flask 1000 ml capacity with stopper 39-5600/12 1 50 mm Square Platen Set
82-1140 4 Conical Flask 250 ml capacity wide mouthed 38-6000 1 BS/ASTM Flow Table Top
82-1260 1 25 ml Graduated Pipette 38-6020 1 Tripod for Flow Table
82-1440 2 Burette 50 ml (Class B) with single bore stopcock 38-6040 1 BS/ASTM Flow Mould.
82-2260 1 Glass Funnel 110 mm dia 38-6060 1 Baseplate for Flow Table
82-2500 1 Wash Bottle Polythene 500 ml 38-6080 1 Callipers
82-3060 1 Reagent Bottle, 1000 ml capacity 38-6100/01 1 Motor Unit for use with EL38-6020
82-3149 2 Polythene Bottle, 5 litre 38-6160 1 Plastic Tamper
39-0410 6 Three Gang Mould for 50 mm Mortar Cubes
82-7901 1 Filter Paper No 74, equivalent to Whatman No 40, 36-0691/01 1 Compact 1500 Standard Compression Machine
82-7926 1 Filter Paper No 94, equivalent to Whatman No 44, 81-0335 1 Trowel, gauging to BS 4550
82-0380 1 Measuring Cylinder 100 ml
82-1300 1 Bulb Pipette 50 ml capacity Set 42305/1 Soundness of aggregates in sodium sulphate
Also required, but not
part of the basic set: or magnesium sulphate,
Set 42245/AR Also required products set ASTM C88, AASHTO T104
1 78-1215/01 Drying Oven 50 litre capacity 82-3505 1 Hydrometer, 1.150 – 1.200 relative density
1 78-1245 Dial Thermometer 0 to 300°C 82-3510 1 Hydrometer, 1.250 – 1.300 relative density
79-5030 1 8 in. dia ASTM Sieve 4.00 mm stainless steel mesh
1 78-5335/01 Analytical Electronic Balance 79-5500 1 8 in. dia ASTM Sieve 8.00 mm stainless steel mesh
1 78-7350 10 kg x 1g Field and Laboratory Scale 79-5550 1 8 in. dia ASTM Sieve 16.0 mm stainless steel mesh
1 81-4020 Sample Tray 306 x 306 x 38 mm 79-5600 1 8 in. dia ASTM Sieve 31.5 mm stainless steel mesh
Chemicals required: Ammonium Ferric Sulphate; Potassium Thiocyanate; 42-1005 1 Wire Basket nominal 6000 cm capacity
3,5,5 Trimethylhexanol. Recommend local purchase. 81-4821 1 Wire Basket BS812 type 2.
82-8700/01 1 Water Bath 48 litres capacity
Set 42265/1 Determination of total sulphate content by Also required, but not part of the basic set:
acid extraction (method B), BS 812 Set 42305/1/AR Also required product set
1 78-0110/01 Soils Drying Oven 225 litre capacity
78-3101/01 1 Hotplate 1 81-4030 Oven Tray
82-0200 2 Glass Beaker 600 ml squat form with spout 1 78-7090 Harvard Trip Balance 2000 g
82-2260 1 Glass Funnel 110 mm dia 1 78-7110 Weight Set for 78-7090
82-7901 1 Filter Paper No 74 equivalent to Whatman No 40, 1 78-7130 Footed Polypropylene Scoop
82-7926 1 Filter Paper No 94, equivalent to Whatman No 44, 1 78-7350 10 kg x 1g Field and Laboratory Scale
Also required, but not part of the basic set: 1 79-5020 8 in. dia ASTM Sieve 4.75 mm mesh
Set 42265/1/AR Also required products set 1 79-5060 8 in. dia ASTM Sieve 2.36 mm mesh
1 78-1215/01 Drying Oven 50 litre capacity 1 79-5100 8 in. dia ASTM Sieve 1.18 mm mesh
1 79-5140 8 in. dia ASTM Sieve 600 µm mesh
1 78-5335/01 Analytical Electronic Balance 1 79-5180 8 in. dia ASTM Sieve 300 µm mesh
1 23-3505 Mortar and Pestle, porcelain 1 79-5220 8 in. dia ASTM Sieve 150 µm mesh
1 83-4160/01 1000°C Muffle Furnace 1 79-5400 8 in. inch dia Lid
1 79-0120 200 mm dia BS Sieve 150 µm mesh 1 79-5410 8 in. dia Receiver
1 79-0230 200 mm dia BS Sieve 1.00 mm mesh 1 79-5530 8 in. dia ASTM Sieve 12.5 mm mesh
1 79-1515 200 mm dia BS Sieve 5.00 mm perf. plate 1 79-5560 8 in. dia ASTM Sieve 19.0 mm mesh
1 79-1595 200 mm dia BS Sieve 20.0 mm perf. plate 1 79-5570 8 in. dia ASTM Sieve 22.4 mm mesh
1 82-3300 Silica Crucible 1 79-5580 8 in. dia ASTM Sieve 25.0 mm mesh
1 79-5610 8 in. dia ASTM Sieve 37.5 mm mesh
1 79-5630 8 in. dia ASTM Sieve 50.0 mm mesh
1 79-5650 8 in. dia ASTM Sieve 63.0 mm mesh
16
Buyer’s Guide
Aggregate and Asphalt Testing: Sets 42310 to 45095/1
17
Buyer’s Guide
Asphalt Testing: Sets 45135/1 to 46105/1
Set 45135/1 Resistance to plastic flow of bituminous Set 46015/1 Determination of ash content of bitumen,
mixtures (Marshall stability), BS 4550, ASTM D482
ASTM D1559, AASHTO T245 81-0495 1 Crucible Tongs
78-0760 1 28 kN Clamped Boss Load Ring 81-0508 1 Heat Resistant Gloves with Gauntlet
23-4200 1 Proctor/Core Cutter Extruder 83-4160/01 1 1000°C Muffle Furnace
45-6310 3 Compaction Mould 82-3320 1 Porcelain Crucible 30 ml
45-6412 1 Compaction Pedestal and Mould Holder
82-3325 1 Porcelain Lid for 82-3320
45-6460 1 Compaction Hammer
45-6800/01 1 25 kN Marshall Load Frame Also required, but not part of the basic set:
45-6850 1 Breaking Head Stability Mould Set 46015/1/AR Also required products set
45-6890 1 Flow Meter (Dial Gauge) 1 78-2950/01 200 mm dia Hotplate
82-5247 1 Portable Thermometer +50°C to +250°C 1 78-5335/01 Analytical Electronic Balance
Also required, but not part of the basic set:
Set 45135/1/AR Also required products set Set 46035/1 Determination of ductility of bitumen or
1 78-1215/01 Drying Oven 50 litre capacity bituminous materials,
1 78-1245 Dial Thermometer 0 to 300°C ASTM D113, AASHTO T51
1 78-2950/01 200 mm dia Hotplate 46-2615/01 1 Ductilometer for testing 3 specimens
1 78-7350 Field and Laboratory Scale 46-2702 3 Ductility Mould
1 23-6191/01 Bench-Mounting Mixer, 4.7 litre capacity 46-2742 3 Base Plate for Ductility Moulds
1 45-5580/01 Isomantle Electric Heater
81-0100 1 Spatula, 100 mm blade
1 79-5020 8 in. dia ASTM Sieve 4.75 mm mesh
1 79-5060 8 in. dia ASTM Sieve 2.36 mm mesh 82-5247 1 Portable Thermometer +50°C to +250°C
1 79-5400 8 in. inch dia Lid. 82-5255 1 Thermometer (IP38C)
1 79-5410 8 in. dia Receiver. 46-5500/01 1 Constant Temperature Bath
1 79-5510 8 in. dia ASTM Sieve 9.50 mm mesh Also required, but not part of the basic set:
1 79-5560 8 in. dia ASTM Sieve 19.0 mm mesh Set 46035/1/AR Also required products set
1 79-5580 8 in. dia ASTM Sieve 25.0 mm mesh 1 79-5180 8 in. dia ASTM Sieve 300 µm mesh
1 81-0140 Spatula 200 mm blade 1 79-5410 8 in. dia Receiver
1 81-0220 Aluminium Scoop, large
1 81-0508 Heat Resistant Gloves with Gauntlet Set 46045/1 Determination of flash point-Cleveland open
1 81-3040 Sample Container, 2.5 litre capacity cup, electrically heated model,
1 81-4020 Sample Tray 306 x 306 x 38 mm BS 4689, ASTM D92
1 82-5261 Thermometer (IP60C)
1 82-8700/01 Water Bath 48 litre 46-3310/01 1 Cleveland Flash Cup Apparatus open cup
82-5257 1 Thermometer (IP28C) –6 to +400°C x 2°C
Set 45145/1 Design method for the composition of
wearing-course rolled asphalt (Marshall test), Set 46065/1 Loss-on-heating/thin-film test,
BS 598-3 BS 2000-45, ASTM D6, D1754,
78-0760 1 28 kN Clamped Boss Load Ring AASHTO T179
23-4200 1 Proctor/Core Cutter Extruder 46-4100/01 1 Loss-On-Heating/Thin Film Oven
45-6310 4 Compaction Mould 46-4350 6 Aluminium Test Pan
45-6410 1 Compaction Pedestal 82-5259 2 Thermometer (IP47C) 155 to 170°C x 0.5°C
45-6460 1 Compaction Hammer 46-5861 1 Penetration Tin
45-6462 1 Paper Discs, pack of 100 Also required, but not part of the basic set:
45-6463 1 Steel Heating Block Set 46065/1/AR Also required products set
45-6800/01 1 25 kN Marshall Load Frame
45-6850 1 Breaking Head Stability Mould 1 78-7000 Dial-O-Gram Balance
45-6880 1 Flow Meter (Dial Gauge) 1 81-0508 Heat Resistant Gloves with Gauntlet
82-5247 1 Portable Thermometer +50°C to +250°C
Also required, but not part of the basic set: Set 46085/1 Determination of softening point, ring and
Set 45145/1/AR Also required products set ball method, BS 2000-58
1 78-1215/01 Drying Oven 50 litre capacity 46-4501 1 Ring and Ball Apparatus, shouldered pattern rings
1 78-1245 Dial Thermometer 0 to 300°C 81-0080 1 Bosshead
1 78-2950/01 200 mm dia Hotplate 46-4821/01 1 Magnetic Stirrer
1 78-7090 Harvard Trip Balance 81-0090 1 Clamp
1 78-7110 Weight Set for 78-7090 82-5261 1 Thermometer (IP60C), –2°C to 80°C
1 78-7130 Footed Polypropylene Scoop 82-5263 1 Thermometer (IP61C), 30°C to 200°C
1 78-7350 Field and Laboratory Scale 82-5265 1 Thermometer (IP89C) –1 to +175°C .
1 23-3150 Riffle Box, 25 mm slot width
1 23-6191/01 Bench-Mounting Mixer, 4.7 litre capacity
1 45-5580/01 Isomantle Electric Heater Set 46086/1 Determination of softening point, ring and
1 81-0140 Spatula 200 mm blade ball method, ASTM D36; AASHTO T53
1 81-0220 Aluminium Scoop, large 46-4502 1 Ring and Ball Apparatus complete to ASTM D36
1 81-0508 Heat Resistant Gloves with Gauntlet 46-4821/01 1 Magnetic Stirrer
1 81-3040 Sample Container. 2.5 litre capacity 81-0080 1 Bosshead
1 81-4020 Sample Tray 81-0090 1 Clamp
1 82-5261 Thermometer (IP60C) 82-5261 1 Thermometer (IP60C), –2°C to 80°C
1 82-8700/01 Water Bath 48 litre 82-5263 1 Thermometer (IP61C), 30°C to 200°C
82-5265 1 Thermometer (IP89C) –1 to +175°C .
Set 45150/1 Dynamic load testing on asphalt pavement
materials, ASTM D4123 Set 46105/1 Determination of penetration,
45-9000/01 1 ELE-MATTA Asphalt Tester
45-9000/10 1 Indirect Tensile Jig BS 2000-49, ASTM D5, AASHTO T49
45-9000/12 1 Creep Testing Jig 46-5290 1 Standard Penetrometer
45-9000/32 2 Vertical Displacement Transducer 46-5360/10 1 Penetration Needle, unverified
45-9000/34 2 Horizontal Displacement Transducer 46-5800 1 Transfer Dish
Also required, but not part of the basic set: 46-5861 10 Penetration Tin
Set 45150/1/AR Also required products set 81-0518 1 Timer Clock
1 83-1735/01 Air Compressor Unit, 1000 kPa 82-5255 1 Thermometer(IP38C) 23°C to 27°C x 0.1°C
1 27-1450/01 Pentium P233 PC System 46-5500/01 1 Constant Temperature Bath
1 45-9000/30 Steel Verification Ring 46-5860 10 Penetration Tin, 70 mm dia x 45 mm deep
1 45-9000/31 Torque Screwdriver
1 45-9010/01 Standard Temperature Controlled Cabinet
1 45-9020/10 Integrated Temperature Measurement
System
1 45-6710/01 ELE Gyropac, Gyratory Compactor
18
Buyer’s Guide
Asphalt and Specialist Testing: Sets 46125/1 to S1006
19
Buyer’s Guide
Specialist Testing: Sets S1010 to S1019
Set S1010 Determination of Compressive Strength Set S1017 Determination of compressive strength,
(effective stress) drained/undrained. Oil drained and undrained with pore pressure
Water Pressure System, BS 1377 measurement oil/water pressure system for
25-3516/01 1 Digital Tritest 50 38 mm samples, BS 1377
78-0260 1 4.5 kN Clamped Boss Load Ring 25-3516/01 1 Digital Tritest 50
25-4120 1 Dial Gauge, 25 mm travel x 0.01 mm divisions 25-4047 1 50 mm Triaxial Cell 1700 kPa
27-1625 1 Pressure Transducer Assembly 1000 kPa 25-4166 1 38 mm/1.5 inch Base Adaptor
27-1110/01 1 4 Channel Digital Pressure Readout Unit 25-4290 1 Membrane Placing Tool 35 mm/38 mm
26-1890 1 Twin-Burette Volume- Change Unit 25-5100 1 Suction Membrane Device 38 mm/1.5 inch dia.
26-1900 1 Red Dye, kerosene soluble 25 g 25-5120 1 Two-Way Split Former, 38 mm/1.5 inch diameter
26-1880 1 Universal Pump and Pressure Indicating Panel, 1700 kPa 25-4540 1 10 ml Burette, single tube drainage.
26-1800/01 2 Pressure Test 1700 25-4520 2 Valve,no volume change 1/4inch BSP.
26-1815 1 Pressure Gauge 1700 kPa (250psi) 25-5050 1 Pressure Pad, 38 mm/1.5 inch diameter
25-1833/01 1 De-aired Water apparatus 25-5061 1 Rubber Membrane 38 mm/1.5 in. dia.r. Pack of 10
26-1926 10 Nylon Tubing, 6 mm o.d, 3500 kPa. Price per metre 25-5081 1 Membrane Sealing Ring 38 mm/1.5 in. dia. Pack of 10
25-5181 1 Porous Disc 38 mm/1.5 inch diameter. Pack of 2
Set S1011 Determination of compressive strength 25-5200 1 Filter Paper Drain 38 mm/1.5 inch dia. Pack of 50
(effective stress) drained/undrained. Oil 25-1833/01 1 De-aired Water Apparatus
Water Pressure System Data Acquisition 26-1912 1 Water Distribution Panel
System, BS 1377 26-1926 10 Nylon Tubing, 6 mm o.d, 3500 kPa. Price per metre.
25-3516/01 1 Digital Tritest 50 26-1800/01 2 Pressure Test 1700
27-1533 1 Transducer Load ring, 4.5 kN capacity 26-1805 2 Oil, 2 litres for Pressure Test 1700
27-1617 1 Axial Strain Transducer Assembly 50 mm travel 26-1815 1 Pressure Gauge 1700 kPa (250psi)
27-1625 3 Pressure Transducer Assembly 1000 kPa 26-1880 1 Universal Pump and Pressure Indicating Panel, 1700 kPa
27-1641 1 Volume Change Transducer Assembly 80cm3 26-1922 5 6 mm Connector
26-1880 1 Universal Pump and Pressure Indicating Panel, 1700 kPa 78-0260 1 4.5 kN Clamped Boss Load Ring
26-1800/01 2 Pressure Test 1700 25-4120 1 Dial Gauge, 25 mm travel x 0.01 mm divisions
25-1833/01 1 De-aired Water Apparatus 26-1890 1 Twin-Burette Volume- Change Unit
26-1926 10 Nylon Tubing, 6 mm o.d, 3500 kPa. Price per metre. 26-1900 1 Red Dye, kerosene soluble 25 g
27-1495/01 1 ADU 8 Channel Data Acquisition Unit 27-1625 1 Pressure Transducer Assembly 1000 kPa
27-1450/01 1 Pentium P233 PC System. 27-1110/01 1 4 Channel Digital Pressure Readout Unit
27-1761 1 CU/CD Effective Stress Triaxial Program, 3.5 in. disk
Set S1018 Determination of compressive strength
Set S1012 Determination of Compressive Strength drained and undrained with pore pressure
(effective stress) drained/undrained. measurement oil/water pressure system for
Pneumatic System, BS 1377 50 mm samples, BS 1377
25-3516/01 1 Digital Tritest 50 25-3516/01 1 Digital Tritest 50
78-0260 1 4.5 kN Clamped Boss Load Ring 25-4047 1 50 mm Triaxial Cell 1700 kPa
25-4120 1 Dial Gauge, 25 mm travel x 0.01 mm divisions. 25-4168 1 50 mm Base Adapter
27-1625 1 Pressure Transducer Assembly 1000 kPa 25-5470 1 Membrane Placing Tool 50 mm diameter
27-1110/01 1 4 Channel Digital Pressure Readout Unit 25-5480 1 Suction Membrane Device 50 mm diameter
26-1890 1 Twin-Burette Volume- Change Unit 25-5500 1 Two-Way Split Former 50 mm diameter
26-1900 1 Red Dye, kerosene soluble 25 g 25-4540 1 10 ml Burette, single tube drainage
26-1880 1 Universal Pump and Pressure Indicating Panel, 1700 kPa 25-4520 2 Valve, no volume change
26-1760 1 Pneumatic Pressure Reducing Panel 1000 kPa 25-5430 1 Pressure Pad 50 mm diameter.
26-1746 2 Bladder-type Air/Water Pressure Assembly 25-5441 1 Rubber Membrane 50 mm diameter, pack of 10
83-1730/01 1 Air compressor Unit, 700 kPa working pressure 25-5461 1 Membrane Sealing Ring 50 mm dia, pack of 10
25-1833/01 1 De-aired Water apparatus 25-5561 1 Porous disc 50 mm pack of 2
26-1926 10 Nylon Tubing, 6 mm o.d, 3500 kPa. Price per metre 25-5580 1 Filter Paper Drain 50 mm diameter. Pack of 50
26-1769 1 Nylon Tubing 30 metre length. 25-1833/01 1 De-aired Water Apparatus
26-1912 1 Water Distribution Panel
Set S1013 Determination of Compressive Strength 26-1926 10 Nylon Tubing, 6 mm o.d, 3500 kPa. Price per metre.
(effective stress) drained/undrained. 26-1800/01 2 Pressure Test 1700
Pneumatic Pressure System Data 26-1805 2 Oil, 2 litres for Pressure Test 1700
Acquisition System, BS 1377 26-1815 1 Pressure Gauge 1700 kPa (250psi)
25-3516/01 1 Digital Tritest 50 26-1880 1 Universal Pump and Pressure Indicating Panel, 1700 kPa
27-1573 1 Submersible Load Transducer Assembly, 5 kN 26-1922 5 6 mm Connector
27-1617 1 Axial Strain Transducer Assembly 50 mm travel 78-0260 1 4.5 kN Clamped Boss Load Ring
27-1625 3 Pressure Transducer Assembly 1000 kPa 25-4215 1 Dial Gauge, 50 mm travel x 0.01 mm divisions
27-1641 1 Volume Change Transducer Assembly 80cm3 26-1890 1 Twin-Burette Volume- Change Unit
26-1880 1 Universal Pump and Pressure Indicating Panel, 1700 kPa 26-1900 1 Red Dye, kerosene soluble 25 g
26-1760 1 Pneumatic Pressure Reducing Panel 1000 kPa 27-1625 1 Pressure Transducer Assembly 1000 kPa
26-1746 2 Bladder-type Air/Water Pressure Assembly 27-1110/01 1 4 Channel Digital Pressure Readout Unit
83-1730/01 1 Air compressor Unit, 700 kPa working pressure
25-1833/01 1 De-aired Water Apparatus Set S1019 Determination of compressive strength
27-1495/01 1 ADU 8 Channel Data Acquisition Unit drained and undrained with pore pressure
27-1450/01 1 Pentium P233 PC System measurement oil/water pressure system for
27-1761 1 CU/CD Effective Stress Triaxial Program, 3.5 in. disk 100 mm samples, BS 1377
26-1926 10 Nylon Tubing, 6 mm o.d, 3500 kPa. Price per metre 25-3516/01 1 Digital Tritest 50
26-1769 1 Nylon Tubing 30 metre length. 25-4157 1 100 mm Triaxial Cell 1700 kPa
27-1293 1 Distance Piece 25-4186 1 100 mm Base Adaptor
25-7610 1 Membrane Placing Tool 100 mm/4 inch diameter
25-7640 1 Suction Membrane Device 100 mm/4 inch dia
25-7650 1 Two-Way Split Former 100 mm diameter
25-4520 2 Valve, no volume change
Continued
20
Buyer’s Guide
Specialist Testing: Sets S1020 to S1030
Continued
21
Buyer’s Guide
Specialist Testing: Sets S1031 to S1042
Set S1031 Triaxial Permeability. Oil Water Pressure. Set S1040 Stress Path Testing System for 50 mm
Data Acquisition System, BS 1377 samples, BS 1377
27-1625 1 Pressure Transducer Assembly 1000 kPa 25-9810 1 ELE Stress Path Cell complete with 4.5 kN
27-1641 2 Volume Change Transducer Assembly 80cm3 Submersible Load Transducer
26-1912 1 Water Distribution Panel 25-9810/20 1 50 mm Base Adaptor for ELE Stress Path Cell
26-1800/01 3 Pressure Test 1700 25-9810/21 1 50 mm Pressure Pad for ELE Stress Path Cell
25-9810/12 1 Vacuum Pad for ELE Stress Path Cell
26-1815 3 Pressure Gauge 1700 kPa (250psi)
25-5561 1 Porous disc 50 mm pack of 2
25-1833/01 1 De-aired Water Apparatus 25-5470 1 Membrane Placing Tool 50 mm diameter
27-1495/01 1 ADU 8 Channel Data Acquisition Unit 25-5480 1 Suction Membrane Device 50 mm diameter
27-1450/01 1 Pentium P233 PC System 25-5441 1 Rubber Membrane 50 mm diameter. Pack of 10
475-700/15 1 Dialog ADU Software logger. 3.5 inch disk 25-5461 1 Membrane Sealing Ring 50 mm diameter. Pack of 10
26-1926 20 Nylon Tubing, 6 mm o.d, 3500 kPa. Price per metre. 25-9892 1 50 mm Axial Strain Transducer
27-1641 1 Volume Change Transducer Assembly 80cm3
Set S1032 Triaxial Permeability. Pneumatic Pressure 27-1625 3 Pressure Transducer Assembly 1000 kPa
System, BS 1377 27-1635 1 Pressure Transducer Assembly 3500 kPa
27-1625 1 Pressure Transducer Assembly 1000 kPa 25-9880/10 1 Constant Rate of Strain Pump
26-1890 2 Twin-Burette Volume-Change Unit 25-9880/15 3 Pressure Regulator, 1000 kPa max.
26-1900 1 Red Dye, kerosene soluble 25 g 26-1746 3 Bladder-type Air/Water Pressure Assembly
26-1870 1 6-Way Water Distribution Panel
27-1110/01 1 4 Channel Digital Pressure Readout Unit
25-1833/01 1 De-aired Water Apparatus
26-1880 1 Universal Pump and Pressure Indicating Panel, 1700 kPa 25-9885/01 1 ELE Stress Path Control System
26-1872 1 Six-way Pneumatic Pressure Control Panel 83-1730/01 1 Air Compressor Unit, 700 kPa
26-1746 3 Bladder-type Air/Water Pressure Assembly 27-1450/01 1 Pentium P233 PC System
83-1730/01 1 Air Compressor Unit, 700 kPa 25-9896 1 Management Software Package
25-1833/01 1 De-aired Water Apparatus
26-1926 20 Nylon Tubing, 6 mm o.d, 3500 kPa. Price per metre Set S1041 Special Soil Testing set comprising Triaxial,
26-1769 1 Nylon Tubing 30 metre length One Dimensional Consolidation and
Direct Shear equipment
Set S1033 Triaxial Permeability Pneumatic Pressure 25-3516/01 1 Digital Tritest 50
System Data Acquisition System, BS 1377 25-4047 1 50 mm Triaxial Cell 1700 kPa
27-1625 1 Pressure Transducer Assembly 1000 kPa 25-4168 1 50 mm Base Adapter
25-5470 1 Membrane Placing Tool 50 mm diameter
27-1641 2 Volume Change Transducer Assembly 80cm3 25-5480 1 Suction Membrane Device 50 mm diameter
27-1495/01 1 ADU 8 Channel Data Acquisition Unit 25-5500 1 Two-Way Split Former 50 mm diameter
27-1450/01 1 Pentium P233 PC System 25-4540 1 10 ml Burette, single tube drainage
475-700/15 1 Dialog ADU Software, 3.5 inch disk 25-4520 2 Valve, no volume change
26-1880 1 Universal Pump and Pressure Indicating Panel, 1700 kPa 25-5430 1 Pressure pad 50 mm diameter
26-1872 1 Six-way Pneumatic Pressure Control Panel 25-5441 1 Rubber Membrane 50 mm diameter, Pack of 10
83-1730/01 1 Air Compressor Unit, 700 kPa 25-5461 1 Membrane Sealing Ring 50 mm dia, Pack of 10
26-1746 3 Bladder-type Air/Water Pressure Assembly 25-5561 1 Porous disc 50 mm pack of 2
25-1833/01 1 De-aired Water Apparatus 25-5580 1 Filter Paper Drain 50 mm diameter. Pack of 50
26-1926 20 Nylon Tubing, 6 mm o.d, 3500 kPa. Price per metre 27-1533 1 Transducer Load Ring, 4.5 kN capacity
26-1769 1 Nylon Tubing 30 metre length. 27-1617 1 Axial Strain Transducer Assembly 50 mm travel
27-1625 3 Pressure Transducer Assembly 1000 kPa
27-1641 1 Volume Change Transducer Assembly 80cm3
Set S1034 Triaxial Permeability Pneumatic Pressure 26-1800/01 2 Pressure Test 1700
System 2 cell system, BS 1377 26-1815 1 Pressure Gauge 1700 kPa (250psi)
27-1625 2 Pressure Transducer Assembly 1000 kPa 26-1880 1 Universal Pump and Pressure Indicating Panel, 1700 kPa
27-1110/01 1 4 Channel Digital Pressure Readout Unit 25-1833/01 1 De-aired Water Apparatus
26-1890 4 Twin-Burette Volume-Change Unit 26-1912 1 Water Distribution Panel
26-1900 1 Red Dye, kerosene soluble 25 g 25-0402 1 Consolidation Frame
26-1880 1 Universal Pump and Pressure Indicating Panel, 1700 kPa 25-0408 1 Set of Weights, 100 kg total weight
26-1872 1 Six-way Pneumatic Pressure Control Panel 25-0503 1 Consolidation Cell, 75 mm diameter sample
26-1746 6 Bladder-type Air/Water Pressure Assembly 27-1649 1 Consolidation Transducer Assembly 10 mm travel
83-1730/01 1 Air Compressor Unit, 700 kPa 26-2112/01 1 Digital Direct/Residual Shear Apparatus
25-1833/01 1 De-aired Water Apparatus 26-2132 1 Set of Weights, 50 kg slotted, uncalibrated
26-1926 20 Nylon Tubing, 6 mm o.d, 3500 kPa. Price per metre 26-2181 1 Shear Box Assembly, 60 mm sq
27-1665 1 Transducer Load Ring 2 kN capacity
26-1769 1 Nylon Tubing 30 metre length 27-1689 1 Vertical Displacement Transducer Assembly
27-1697 1 Horizontal Displacement Transducer Assembly
Set S1035 Triaxial Permeability Pneumatic Pressure 27-1495/01 1 ADU 8 Channel Data Acquisition Unit
System 2 cell system. 27-1502 1 8 Channel Expansion Analogue Input Module
Data Acquisition System, BS 1377 27-1450/01 1 Pentium P233 PC System
27-1625 2 Pressure Transducer Assembly 1000 kPa 27-1755 1 Quick Undrained Triaxial Program, 3.5 inch disk
27-1641 4 Volume Change Transducer Assembly 80cm3 27-1761 1 CU/CD Effective Stress Triaxial Program, 3.5 in. disk
27-1495/01 1 ADU 8 Channel Data Acquisition Unit 27-1769 1 One Dimensional Consolidation Program, 3.5 in. disk
27-1450/01 1 Pentium P233 PC System 27-1781 1 Direct/Residual Shear Program 3.5 inch disk
475-700/15 1 Dialog ADU Software, 3.5 inch disk.
26-1880 1 Universal Pump and Pressure Indicating Panel, 1700 kPa Set S1042 Stress Path Testing System using
26-1872 1 Six-way Pneumatic Pressure Control Panel Tritest Load Frame
25-3516/01 1 Digital Tritest 50
26-1746 6 Bladder-type Air/Water Pressure Assembly 27-1625 3 Pressure Transducer Assembly 1000 kPa
83-1730/01 1 Air Compressor Unit, 700 kPa 27-1573 1 Submersible Load Transducer Assembly 5 kN
25-1833/01 1 De-aired Water Apparatus 27-1617 1 Axial Strain Transducer Assembly 50 mm travel
26-1926 20 Nylon Tubing, 6 mm o.d, 3500 kPa. Price per metre 27-1293 1 Distance Piece
26-1769 1 Nylon Tubing 30 metre length 27-1641 1 Volume Change Transducer Assembly 80cm3
25-9885/01 1 ELE Stress Path Control System
25-9880/15 2 Pressure Regulator, 1000 kPa max
26-1746 2 Bladder-type Air/Water Pressure Assembly
25-1833/01 1 De-aired Water Apparatus
27-1450/01 1 Pentium P233 PC System
25-9896 1 Management Software Package
26-1870 1 6-Way Water Distribution Panel
26-1769 1 Nylon Tubing 30 metre length
26-1926 10 Nylon Tubing, 6 mm o.d, 3500 kPa. Price per metre.
22
Buyer’s Guide
Specialist Testing: Sets S1043 to S1057
Set S1043 Special Triaxial Test set 1.4in. and 2.8in. dia Set S1050 Cyclic Triaxial System for 100 mm dia
specimens samples, ASTM D3999
25-3516/01 1 Digital Tritest 50 25-8700/01 1 Cyclic Triaxial Control System
25-4117 1 70 mm Triaxial Cell 1700 kPa 25-8700/10 1 5 kN Submersible Load Cell
25-4170 1 35 mm/1.4 inch Base adaptor 25-8700/20 1 Axial Displacement Transducer, ±25 mm stroke
25-4290 1 Membrane Placing Tool 35 mm/38 mm 25-8700/30 1 Volume Change Transducer 80 cm3
25-4300 1 Suction Membrane Device 35 mm/1.4 inch dia. 25-8700/40 3 Pressure Transducer, 1000 kPa
25-4320 1 Two-Way Split Former 35 mm/1.4 inch diameter 25-4157 1 100 mm Triaxial Cell 1700 kPa
25-4540 1 10 ml Burette, single tube drainage 25-4186 1 100 mm Base Adaptor
25-4520 2 Valve, no volume change 25-7590 1 Pressure Pad 100 mm diameter
25-4250 1 Pressure Pad 35 mm/1.4 inch diameter 26-1880 1 Universal Pump and Pressure Indicating Panel, 1700 kPa
25-4261 1 Rubber Membrane 35 mm/1.4 in. dia. Pack of 10 83-1735/01 1 Air Compressor Unit, 1000 kPa
25-4281 1 Membrane Sealing Ring 35 mm/1.4 in. dia. Pack of 10 26-1742/01 1 Compressed Air Dryer, 1600 kPa
25-4461 1 Porous Disc 35 mm 1.4 inch diameter. Pack of 2 26-1746 2 Bladder-type Air/Water Pressure Assembly
25-4880 1 Filter Paper Drain, 35 mm/1.4 inch Pack of 50 26-1926 20 Nylon Tubing, 6 mm o.d, 3500 kPa. Price per metre
25-4178 1 2.8 inch Base Adaptor 25-1833/01 1 De-aired Water Apparatus
25-6470 1 Membrane Placing Tool 70 mm/2.8 inch diameter 26-1769 1 Nylon Tubing 30 metre length
25-6660 1 Suction Membrane Device 2.8 inch diameter 27-1450/01 1 Pentium P233 PC System
25-6680 1 Two-Way Split Former 2.8 inch diameter 25-8700/60 1 Connection Kit
25-4540 1 10 ml Burette, single tube drainage 25-7610 1 Membrane Placing Tool 100 mm/4 inch diameter
25-6630 1 Pressure Pad, 2.8 inch diameter 25-7640 1 Suction Membrane Device 100 mm/4 inch dia
25-6441 1 Rubber Membrane 70 mm/2.8 in. dia. Pack of 10 25-7650 1 Two-Way Split Former 100 mm diameter
25-6641 1 Membrane Sealing Ring 2.8 in. dia. Pack of 10 25-7621 1 Rubber Membrane 100 mm/4 in. dia. Pack of 10
25-6721 1 Porous Disc 2.8 inch diameter 25-7631 1 Membrane Sealing Ring 100 mm dia. Pack of 10
25-6580 1 Filter Paper Drain 70 mm/2.8 in. dia. Pack of 50 25-7661 1 Porous Disc 100 mm diameter Pack of 2
25-1833/01 1 De-aired Water Apparatus 25-7670 1 Filter Paper Drain, 100 mm/4 in. dia. Pack of 50
26-1912 1 Water Distribution Panel
26-1926 1 Nylon Tubing, 6 mm o.d, 3500kPa. Price per metre Set S1051 Cyclic Triaxial Control System with data
26-1800/01 2 Pressure Test 1700 acquisition, load frame and software,
26-1805 1 Oil, 2 litres for pressure test 1700 complete with Radial and Axial on Sample
26-1815 1 Pressure Gauge 1700 kPa (250psi) Transducers
26-1880 1 Universal Pump and Pressure Indicating Panel, 1700 kPa 25-8700/01 1 Cyclic Triaxial Control System
26-1922 1 6 mm Connector 25-8700/10 1 5 kN Submersible Load Cell
27-1573 1 Submersible Load Transducer Assembly 5 kN 25-8700/20 1 Axial Displacement Transducer, ± 25 mm stroke
27-1617 1 Axial Strain Transducer Assembly 50 mm travel 25-8700/30 1 Volume Change Transducer 80 cm3
27-1293 1 Distance Piece 25-8700/40 3 Pressure Transducer, 1000kPa
27-1641 1 Volume Change Transducer Assembly 80cm3 25-8700/50 1 100 mm Triaxial Cell
27-1625 3 Pressure Transducer Assembly 1000 kPa 25-4186 1 100 mm Base Adaptor
27-1495/01 1 ADU 8 Channel Data Acquisition Unit 25-7590 1 Pressure Pad 100 mm diameter
27-1509/01 1 Standby Power Supply Unit 26-1880 1 Universal Pump and Pressure Indicating Panel, 1700 kPa
27-1450/01 1 Pentium P233 PC System 83-1735/01 1 Air Compressor Unit, 1000 kPa
27-1755 1 Quick Undrained Triaxial Program, 3.5 inch disk
26-1742/01 1 Compressed Air Dryer 1600 kPa
27-1761 1 CU/CD Effective Stress Triaxial Program, 3.5 in. disk
26-1746 2 Bladder-type Air/Water Pressure Assembly
26-1926 20 Nylon Tubing, 6 mm o.d, 3500 kPa. Price per metre
Set S1044 Stress Path and Effective Stress System,
25-1833/01 1 De-aired Water Apparatus
BS 1377
26-1769 1 Nylon Tubing 30 metre length
25-3516/01 1 Digital Tritest 50
27-1450/01 1 Pentium P233 PC System
27-1625 3 Pressure Transducer Assembly 1000 kPa
27-1573 1 Submersible Load Transducer Assembly 5 kN 25-8700/60 1 Connection Kit
27-1617 1 Axial Strain Transducer Assembly 50 mm travel 25-8730 1 Radial Strain Transducer
27-1293 1 Distance Piece 25-8735 1 Axial Strain Transducer (set of two)
27-1641 1 Volume Change Transducer Assembly 80cm3 25-7610 1 Membrane Placing Tool 100 mm/4 inch diameter
25-9885/01 1 ELE Stress Path Control System 25-7640 1 Suction Membrane Device 100 mm/4 inch diameter
25-9880/15 2 Pressure Regulator, 1000 kPa max 25-7650 1 Two-Way Split Former 100 mm diameter
26-1746 2 Bladder-type Air/Water Pressure Assembly 25-7621 1 Rubber Membrane 100 mm/4 in. dia. Pack of 10
26-1760 1 Pneumatic Pressure Reducing Panel 1000 kPa 25-7631 1 Membrane Sealing Ring 100 mm dia. Pack of 10
26-1870 1 6-Way Water Distribution Panel 25-7661 1 Porous Disc 100 mm diameter Pack of 2
25-1833/01 1 De-aired Water Apparatus 25-7670 1 Filter Paper Drain, 100 mm/4 in. dia. Pack of 50
27-1450/01 1 Pentium P233 PC System
27-1761 1 CU/CD Effective Stress Triaxial Program, 3.5 in. disk Set S1055 Pneumatic Pressure System for 1 Cell
25-9896 1 Management Software Package system, For Two Independent Sources,
26-1769 1 Nylon Tubing 30 metre length 700 kPa Max.
26-1926 10 Nylon Tubing, 6 mm o.d, 3500 kPa. Price per metre 26-1746 2 Bladder-type Air/Water Pressure Assembly
83-1730/01 1 Air Compressor Unit, 700 kPa
Set S1046 Dynamic Load Testing of Asphalt Pavement 26-1880 1 Universal Pump and Pressure Indicating Panel, 1700 kPa
Materials, BS DD 213, BS DD 226, BS 598; 26-1760 1 Pneumatic Pressure Reducing Panel 1000 kPa
ASTM D4123 26-1926 20 Nylon Tubing, 6 mm o.d, 3500 kPa. Price per metre
45-9000/01 1 ELE-MATTA Asphalt Tester complete 26-1769 1 Nylon Tubing 30 metre length
45-9000/10 1 Indirect Tensile Jig
45-9000/12 1 Creep Testing Jig ) Set S1057 Direct/Residual Shear Apparatus, 60 mm
45-9000/32 2 Vertical Displacement Transducer Square Specimen with Transducers for use
45-9000/34 2 Horizontal Displacement Transducer with ADU Logging System
83-1735/01 1 Air Compressor Unit, 1000 kPa BS 1377; ASTM D3080
27-1450/01 1 Pentium P233 PC System 27-1531 1 Transducer Load Ring 3 kN capacity
45-9000/30 1 Steel Verification Ring, calibration check device 27-1689 1 Vertical Displacement Transducer Assembly
45-9000/31 1 Torque Screwdriver for indirect tension tests 27-1697 1 Horizontal Displacement Transducer Assembly
45-9020/01 1 Environmental Chamber 26-2112/01 1 Digital Direct/Residual Shear Apparatus
45-9020/10 1 Integrated Temperature Measurement System 26-2181 1 Shear Box Assembly, 60 mm square
26-2185 1 Specimen Cutter, 60 mm square
26-2189 1 Specimen Extrusion Tool, 60 mm square
26-2132 1 Set of Weights, 50 kg slotted, uncalibrated
27-1781 1 Direct/Residual Shear Program 3.5 inch disk
23
Buyer’s Guide
Specialist Testing: Sets S1060 to S1075
Set S1060 50 mm Triaxial Cell with 38 mm accessories Set S1065 100 mm Triaxial Cell with 100 mm accessories
25-4047 1 50 mm Triaxial Cell 1700 kPa 25-4157 1 100 mm Triaxial Cell 1700 kPa
25-4166 1 38 mm/1.5 inch Base Adaptor 25-4186 1 100 mm Base Adaptor
25-4290 1 Membrane Placing Tool 35 mm/38 mm 25-7610 1 Membrane Placing Tool 100 mm/4 inch diameter
25-5100 1 Suction Membrane Device 38 mm/1.5 inch dia. 25-7640 1 Suction Membrane Device 100 mm/4 inch dia
25-5120 1 Two-Way Split Former, 38 mm/1.5 inch diameter
25-5050 1 Pressure Pad, 38 mm/1.5 inch diameter 25-7650 1 Two-Way Split Former 100 mm diameter
25-5061 1 Rubber Membrane 38 mm/1.5 in. dia. Pack of 10 25-7590 1 Pressure Pad 100 mm diameter
25-5081 1 Membrane Sealing Ring 38 mm/1.5 in. dia. Pack of 10 25-7621 1 Rubber Membrane 100 mm/4 in. dia. Pack of 10
25-5181 1 Porous Disc 38 mm/1.5 inch diameter. Pack of 2 25-7631 1 Membrane Sealing Ring 100 mm dia. Pack of 10
25-5200 1 Filter Paper Drain 38 mm/1.5 in. dia. Pack of 50 25-7661 1 Porous Disc 100 mm diameter Pack of 2
25-4200 1 Piston Restraint Clamp for ELE triaxial cells, 25-7670 1 Filter Paper Drain, 100 mm/4 in. dia. Pack of 50
manufactured from July 1996 25-4200 1 Piston Restraint Clamp for ELE triaxial cells,
25-4520 2 Valve, no volume change manufactured from July 1996
25-4520 2 Valve, no volume change
Set S1061 50 mm Triaxial Cell with 50 mm accessories
25-4047 1 50 mm Triaxial Cell 1700 kPa
25-4168 1 50 mm Base Adapter Set S1067 Proctor Penetrometer Spring Type with
25-5470 1 Membrane Placing Tool 50 mm diameter Adaptor Stem, Needle points 1,3/4,1/2,1/3,1/5,1/10,
1
25-5480 1 Suction Membrane Device 50 mm diameter /20 in2 area with Adaptor and Case,
25-5500 1 Two-Way Split Former 50 mm diameter ASTM D1558
25-5430 1 Pressure pad 50 mm diameter 29-3925 1 Proctor Penetrometer Spring Type
25-5441 1 Rubber Membrane 50 mm diameter, Pack of 10 29-3929 1 Set of Needle Points
25-5461 1 Membrane Sealing Ring 50 mm dia, Pack of 10 29-3933 1 Case for Proctor Penetrometer
25-5561 1 Porous disc 50 mm pack of 2
25-5580 1 Filter Paper Drain 50 mm diameter. Pack of 50
25-4200 1 Piston Restraint Clamp for ELE triaxial cells, Set S1068 Transducer Load Rings 2, 3, 4.5, 10, 28, 50 kN
manufactured from July 1996. Capacity Calibrated in Compression. Fitted
25-4520 2 Valve, no volume change with 5 pin DIN plugs
27-1529 1 Transducer Load Ring, 2 kN capacity, compression
Set S1062 70 mm Triaxial Cell with 50 mm accessories 27-1531 1 Transducer Load Ring 3 kN capacity, compression
25-4117 1 70 mm Triaxial Cell 1700 kPa 27-1533 1 Transducer Load ring, 4.5 kN capacity, compression
25-4174 1 50 mm Base Adaptor 27-1535 1 Transducer Load Ring, 10 kN capacity, compression
25-5470 1 Membrane Placing Tool 50 mm diameter 27-1539 1 Transducer Load Ring 28 kN capacity, compression
25-5480 1 Suction Membrane Device 50 mm diameter 27-1541 1 Transducer Load ring 50 kN capacity, compression
25-5500 1 Two-Way Split Former 50 mm diameter
25-5430 1 Pressure pad 50 mm diameter
25-5441 1 Rubber Membrane 50 mm diameter, Pack of 10 Set S1070 Set of British Standard Sieves and Sieve
25-5461 1 Membrane Sealing Ring 50 mm dia, Pack of 10 Shaker, BS 410
25-5561 1 Porous disc 50 mm pack of 2 79-0020 1 200 mm dia Receiver
25-5580 1 Filter Paper Drain 50 mm diameter. Pack of 50 79-0070 1 200 mm dia BS Sieve 63 µm stainless steel mesh.
25-4200 1 Piston Restraint Clamp for ELE triaxial cells, 79-0080 1 200 mm dia BS Sieve 75 µm stainless steel mesh.
manufactured from July 1996. 79-0120 1 200 mm dia BS Sieve 150 µm stainless steel mesh.
25-4520 2 Valve, no volume change 79-0140 1 200 mm dia BS Sieve 212 µm stainless steel mesh.
79-0160 1 200 mm dia BS Sieve 300 µm stainless steel mesh.
Set S1063 70 mm Triaxial Cell with 70 mm accessories
25-4117 1 70 mm Triaxial Cell 1700 kPa 79-0180 1 200 mm dia BS Sieve 425 µm stainless steel mesh.
25-4176 1 70 mm Base Adaptor 79-0200 1 200 mm dia BS Sieve 600 µm stainless steel mesh.
25-6470 1 Membrane Placing Tool 70 mm/2.8 inch diameter 79-0240 1 200 mm dia BS Sieve 1.18 mm stainless steel mesh.
25-6480 1 Suction Membrane Device 70 mm diameter 79-0270 1 200 mm dia BS Sieve 2.00 mm stainless steel mesh.
25-6500 1 Two-Way Split Former, 70 mm diameter 79-0010 1 200 mm Dia Lid
25-6430 1 Pressure Pad 70 mm diameter. 79-2020 1 300 mm dia Receiver.
25-6441 1 Rubber Membrane 70 mm/2.8 in. dia. Pack of 10 79-2280 1 300 mm dia BS Sieve 2.36 mm stainless steel mesh.
25-6461 1 Membrane Sealing Ring 70 mm dia Pack of 10 79-2300 1 300 mm dia BS Sieve 3.35 mm stainless steel mesh.
25-6561 1 Porous Disc 70 mm diameter Pack of 2 79-2515 1 300 mm dia BS Sieve 5.00 mm perforated plate.
25-6580 1 Filter Paper Drain 70 mm/2.8 in. dia. Pack of 50
25-4200 1 Piston Restraint Clamp for ELE triaxial cells, 79-2525 1 300 mm dia BS Sieve 6.30 mm perforated plate.
manufactured from July 1996 79-2555 1 300 mm dia BS Sieve 10.0 mm perforated plate.
25-4520 2 Valve, no volume change 79-2575 1 300 mm dia BS Sieve 14.0 mm perforated plate.
79-2595 1 300 mm dia BS Sieve 20.0 mm perforated plate.
Set S1064 100 mm Triaxial Cell with 70 mm accessories 79-2615 1 300 mm dia BS Sieve 28.0 mm perforated plate.
25-4157 1 100 mm Triaxial Cell 1700 kPa 79-2640 1 300 mm dia BS Sieve 37.5 mm perforated plate.
25-4182 1 70 mm Base Adaptor 79-2655 1 300 mm dia BS Sieve 50.0 mm perforated plate.
25-6470 1 Membrane Placing Tool 70 mm/2.8 inch diameter 79-2670 1 300 mm dia BS Sieve 63.0 mm perforated plate.
25-6480 1 Suction Membrane Device 70 mm diameter 79-2680 1 300 mm dia BS Sieve 75.0 mm perforated plate.
25-6500 1 Two-Way Split Former, 70 mm diameter
25-6430 1 Pressure Pad 70 mm diameter 79-2010 1 300 mm dia Lid.
25-6441 1 Rubber Membrane 70 mm/2.8 in. dia. Pack of 10 80-0350/01 1 Sieve Shaker EFL2000/2
25-6461 1 Membrane Sealing Ring 70 mm dia Pack of 10 79-7200 2 Sieve Brush, double ended, brass and nylon bristle
25-6561 1 Porous Disc 70 mm diameter Pack of 2
25-6580 1 Filter Paper Drain 70 mm/2.8 in. dia. Pack of 50 Set S1075 Repeated and Dynamic Load Testing of
25-4200 1 Piston Restraint Clamp for ELE triaxial cells, Asphalt and Unbound Pavement Materials
manufactured from July 1996 (Closed Loop Control)
25-4520 2 Valve, no volume change BS DD 213, BS DD 226, BS 598; ASTM D4123
45-9100/01 1 UTM-5P Base System
45-9101 1 Indirect Tensile Set
45-9102 1 Creep Testing Set
45-9001 1 Unbound Testing Set
25-7621 1 Rubber Membrane 100 mm/4 in. dia. Pack of 10
25-7631 1 Membrane Sealing Ring 100 mm dia. Pack of 10
25-7661 1 Porous Disc 100 mm diameter Pack of 2
83-1735/01 1 Air Compressor Unit, 1000 kPa
27-1450/01 1 Pentium P233 PC System
45-9010/01 1 Standard Temperature Controlled Cabinet
24
Buyer’s Guide
Index of Standard Test Sets
BS 812-103 Particle size distribution
British Standard Test Sets Set 42065
25
Buyer’s Guide
Index of British Standard Test Sets
BS 1377 Compressive Strength (effective stress) BS 1377 Dry density/moisture relationship, vibrating
drained /undrained. hammer method
Pneumatic Pressure System 3 cell Set 24345/1
Set S1022
Erodibility, pinhole method
Compressive Strength (effective stress) Set 25045
drained /undrained.
Pneumatic Pressure System 3 cell. Expansion (swell) test
Data Acquisition System Set 24495
Set S1023
Linear shrinkage
Compressive Strength (effective stress) Set 24075
drained /undrained.
Pneumatic Pressure System 3 cell. Liquid Limit, Casagrande method
Data Acquisition System Set 24015
Set S1024
Liquid Limit, cone penetrometer method
Compressive strength. Set 24035
Undrained triaxial oil water pressure system
Set S1000 Loss-on-ignition
Set 24205/1
Compressive strength.
Undrained triaxial oil water pressure system. Maximum density of sands
Data acquisition system Set 24385
Set S1001
Minimum density of gravelly soils
Compressive strength. Set 24395
Undrained triaxial pneumatic pressure system
Set S1002 Moisture content determination, oven method
Set 23055/1
Compressive strength.
Undrained triaxial pneumatic pressure system Moisture content determination, sand bath method
Data Acquisition System
Set 23065/1
Set S1003
One-dimensional consolidation
Compressive Undrained Triaxial Strength (QUTXL)
Set 25015
38 mm dia samples
Set 25095/1
Organic matter content
Set 24195
Compressive Undrained or Drained Triaxial Strength
(CU/CD)
Particle density of fine soils, small pyknometer
Set 25105/1
method
Set 24115/1
Density, immersion in water
Set 24085/1
Particle density of fine to medium and
coarse-grained soils, gas jar method,
Direct/Residual Shear Test, 60 mm square specimen
Set 24105/1
Set 26045/1
Particle density of non-cohesive soils up to 20 mm
Direct/Residual Shear Apparatus, 60 mm
particle size, large pyknometer method
Square Specimen with Transducers for use
Set 24125
with ADU Logging System
Set S1057
Particle size distribution, sedimentation by
Dry density in-situ, core-cutter method hydrometer method
Set 29075 Set 24155/1
Dry density in-situ, sand replacement method Particle size distribution, sedimentation by
Set 29045 Pipette method
Set 24175/1
Dry density in-situ, sand replacement
method (suitable for cohesive soils) Particle size distribution, wet and dry method
Set 29035 Set 24145
Dry density/moisture relationship 2.5 kg rammer Permeability of soil, constant head permeameter
method (for soils with some coarse gravel) Set 25025
Set 24315
pH value
Dry density/moisture relationship, 4.5 kg rammer Set 24275
method (for soils with some coarse gravel
Set 24335 Plastic limit and plasticity index
Set 24045
Dry density/moisture relationship, 2.5 kg rammer
method, (for up to medium gravel size) Preparation of Disturbed Samples of Soil
Set 24305 Set 23015/1
26
Buyer’s Guide
Index of British Standard Test Sets
BS 1377 Rate of consolidation of soils using an BS 1881 Compression Testing of 150 mm Cubes and
ELE/Rowe-type hydraulic consolidation cell Flexural Testing of Beams, Kerbs, Blocks and Flags
Set 25055/1 Set 36060
Sample preparation for CBR by dynamic Drying, shrinkage and moisture movement
compaction, 2.5 kg rammer Set 34375
Set 24445
BS 1881-101 Mixing and sampling fresh concrete, site and
Sample preparation for CBR by dynamic laboratory
compaction, 4.5 kg rammer Set 34015
Set 24455
BS 1881-102 Slump determination
Sample preparation for CBR by obtaining an Set 34025
undisturbed sample
Set 24475 BS 1881-103 Compacting factor determination
Set 34035
Sample preparation for CBR by static compression
Set 24435 BS 1881-104 Vebe time
Set 34045/1
Sample preparation for CBR by vibrating
compaction BS 1881-105 Flow determination
Set 24465/1 Set 34055
Saturation moisture content of chalk, BS 1881-106 Air content of fresh concrete, type B method
Set 23075/1 Set 34165
Shear strength by the laboratory vane method BS 1881-107 Density of compacted fresh concrete
Set 26065 Set 34125
Shrinkage, volumetric method BS 1881-108 Making 100 mm test cubes from fresh concrete
Set 24055 Set 34195
Shrinkage, limit, volumetric method Making 150 mm test cubes from fresh concrete
Set 24065 Set 34205
Stress Path and Effective Stress System Making test beams from fresh concrete:
Set S1044 100 x 100 x 500 mm
Set 34225
Stress Path Testing System for 50 mm samples
Set S1040 BS 1881-109 Making test beams from fresh concrete:
150 x 150 x 750 mm
Sulphate content, gravimetric method Set 34215
Set 24225/1
BS 1881-110 Making test cylinders from fresh concrete:
Sulphate content, preparation of soil, acid extract, 100 mm diameter x 200 mm
water extract and groundwater Set 34255
Set 24215/1
Making test cylinders from fresh concrete:
Total dissolved solids 150 mm diameter x 300 mm
Set 24265/1 Set 34235
Triaxial Permeability Oil Water Pressure Making testing cylinders from fresh concrete:
Set S1030 150 mm diameter x 150 mm
Set 34245
Triaxial Permeabilit. Oil Water Pressure
Data Acquisition System Sulphur capping 100 mm hardened cylinders
Set S1031 and cores
Set 34325/1
Triaxial Permeabilit, Pneumatic Pressure System
Set S1032 Sulphur capping 150 mm hardened cylinders
and cores
Triaxial Permeability Pneumatic Pressure System Set 34315/1
Data Acquisition System
Set S1033 BS 1881-111 Curing of test specimens, (20°C method)
Set 34345/1
Triaxial Permeability Pneumatic Pressure System
2 cell system BS 1881-114 Density of hardened concrete
Set S1034 Set 34140
Triaxial Permeability Pneumatic Pressure System BS 1881-120 Sulphur capping 100 mm hardened cylinders
2 cell system. Data Acquisition System and cores
Set S1035 Set 34325/1
27
Buyer’s Guide
Index of British Standard Test Sets
BS 1881-125 Mixing and sampling fresh concrete, site and BS 4551 Flow of mortars and hydraulic cement
laboratory Set 38265/1
Set 34015
BS 4551-1 Air content of freshly- mixed mortars,
BS 1881-129 Density of partially compacted semi-dry concrete density method
Set 34130 Set 38295
BS 1881-131 Preparation of 100 mm concrete cubes Consistence of mortars, dropping ball method
Set 39025/1 Set 38235
BS 1881-208 Determination of initial surface absorption (ISAT) Consistence retentivity and water retentivity
Set 35405 Set 38245
BS 1924 Dry density in-situ, sand replacement method BS 4689 Determination of flash point-Cleveland open
Set 29045 cup, electrically heated model
Set 46045/1
Dry density in-situ, sand replacement method
(suitable for cohesive soils) BS 5075 Determination of compacting factor
Set 29035 Set 34035
BS 3892 Preparation and testing of 40 x 40 x 160 mm BS DD 213 Dynamic Load Testing of Asphalt Pavement
mortar prisms Materials
Set 39045/1 Set S1046
BS 3892-1 Determination of moisture content Repeated and Dynamic Load Testing of Asphalt and
Set 38340/1 Unbound Pavement Materials
(Closed Loop Control)
Determination of water requirement Set S1075
Set 38350/1
BS DD 226 Dynamic Load Testing of Asphalt Pavement
Determination of pozzolanic activity index Materials
Set 38370/1 Set S1046
BS 4359-2 Specific surface (fineness) Repeated and Dynamic Load Testing of Asphalt and
Set 38015 Unbound Pavement Materials
(Closed Loop Control)
Air permeability (fineness) Set S1075
Set 38025
BS DD 250 Determination of Binder Content by the
BS 4550 Determination of ash content of bitumen Ignition Method
Set 46015/1 Set 45080/1
28
Buyer’s Guide
Index of ASTM Test Sets
29
Buyer’s Guide
Index of ASTM Test Sets
ASTM D1195 Bearing capacity of soil for static load on ASTM D4254 Maximum and minimum index density of soils
spread footings Set 24405/2
Set 29015
ASTM D4318 Determination of liquid limit
ASTM D1196 Bearing capacity of soil for static load on Set 24025
spread footings
Set 29015 Determination of plastic limit and plasticity index
Set 24045
ASTM D1556 Density of soil in place, sand cone method
Set 29055 ASTM D4429 CBR, in-situ
Set 24505
ASTM D1557 Moisture/density relationship of soils and
soil-cement mixtures ASTM D4647 Determination of erodibility, pinhole method
Set 24355 Set 25045
ASTM D1558 Proctor Penetrometer Spring Type with ASTM D6307 Determination of Binder Content by the
Adaptor Stem, Needle points 1,3/4,1/2,1/3,1/5,1/10, 1/20 in2 Ignition Method
area with Adaptor and Case Set 45080/1
Set S1067
ASTM E303 In-situ surface frictional properties
ASTM D1559 Resistance to plastic flow of bituminous mixtures Set 42355
(Marshall stability)
Set 45135/1
30
Buyer’s Guide
Index of AASHTO Test Sets
31
Buyer’s Guide
Index of AFNOR, DIN and EN Test Sets
Determination of flow
Set 34055
32