Professional Documents
Culture Documents
Contents
1. In the edition channels screen,Locat the channel you want To change satellite
to edit and press "4" in the Keypad.
2. You will notice the sub-menu in screen.
3. You can press the arrow keys to select and use the numeric
keys to input the value of parameter.
4. Select save to confirm them,otherwise select EXIT to to
back.
(1). Satellite: Press OK to enter the submenu, and rename (1). Satellite: Press OK to display the satellite list.Select the
the name of the new satellite.Press MENU to exit this menu. satellite you want to check with pressing . You can also
(2). LNB Type: Select proper LNB type using the arrow keys press to select the satellite.
according to your physical LNB type. (2). LNB Type: Select proper LNB type using the arrow keys
(3). LNB Freq(1,2): Enter the proper LNB frequency referring according to your physical LNB type.
to oyur LNB using the numeric keys on the Keypad. (3). LNB Freq(1,2): Enter the proper LNB frequency referring
(4). LNB Power: Select the desired option. If oyur STB is to your LNB using the numeric keys on the Keypad.
connected to another rceiver through LOOP THROUGH (4). LNB Power: Select the desired option.If your STB is
suppor ,you shoule check which receiver is connected directly connected to another receiver through LOOP THROUGH
to the LNB. In case the other receiver is directly connected support, you should check which receiver is connected directly
to the LNB,the select OFF. to the LNB.In case the other receiver is drectly connected
(5). 22K: 22KHzcontrol is automatically set for each LNB to the lNB, then select OFF.
alternative.If "universal" is connected directly to the LNB.In (5). 22K: 22KHz control is automatically set for each LNB
case the other receiver is directly connected to the LNB,the alternative.If "universal" is selected, 22KHz control should
select OFF. be "off state".
(6). DiSEqC: Select the port number to get the RF signal (6). DiSEqC: Select the port number to get the RF signal
from the LNB, which is connected, to DiSEqC switching box. from the LNB, which is connected, to V swiching box.
(7). Positioner: To set satellite position.
3.1 Language
Select the desired language for menu.
4. Tools
4.1 Information
You can get the information of the current channel from here.
Chapter III Specifications Handling Precautions and Prohibitions of Battery in Sat Meter
Warning:
You are using Lithium ion batteries or Nickel metal hydride batteries
in the machine now, so please don't work under high temperature or
high pressure conditions. If the following items happened, abnormal
chemical reaction may occur which will lead to the battery overheat,
emit smoke, ignite and/or burst.
(1) incinerate and dispose the battery in fire or heat it;
(2) pierce the battery with a nail or other sharp objects, strike it with
a hammer, or step on it;
(3) immerse the battery with water or connect the positive(+) and
negative(-) terminals with a metal objects such as necklaces, hair
pins, etc.
Notice:
The battery is only applicable to the charger which supplied or appointed
by the manufacturer of this machine.
The charging time should be minimum 5 hours for the first time, and
it should not be charged over 12 hours after the first time.
Please keep your machine off when the battery is charging.
The battery should be stored within a temperature range of 0* to 40*.
When stored for a long period, charge the battery at least once per half
month so as to prevent over discharge.
The battery is expendable.
Handling:
Improper setting of new battery may lead to the battery burst.
Please use the battery only supplied by the manufacturer if you want
to change a new battery.
Please do not put the battery in fire or dispose it together with garbage.
Please contact the waste administrative institute in your place to get
the nearest battery collection station.