IMPORTANT PROPERTY: As compared to other water based system UBOND AP+ - Does not discolour or turn milky – soon after drying – approx. 4 mins. To 20 mins. – Drying Time ˜ Extremely good durability / colour retention / gloss retention. ˜ Extremely low VOC. ˜ Good anti-graffiti properties. ˜ Resistance to dirt pickup. ˜ Good overall chemical resistance. ˜ Cost benefits in labour utilisation, coating film builds whilst maintaining excellent corrosion resistance. ˜ Excellent abrasion resistance. ˜ Low temperature cure / drying attributes. UBOND AP+ pure aliphatic acrylate top coat provides high resistance to TEMPERATURE [upto 400 deg. C], carbon dioxide, water and also ensures stability even under long term exposure to UV rays. This top coat has also self cleaning properties which enable the coating to look clean and neat even after years of exposure. UBOND AP+ consisting of silane/siloxane primer and pure aliphatic in combination protects the concrete surfaces from carbon dioxide, sulphur dioxide, oxygen, water, chlorides and acid gases while allowing water vapours from within to get out.
NON STAINING DURABLE
Stain Resistant, water repellent, hard wearing, U.V. resistant Gloss Coating – UBOND AP+ COATING ON METALS FOR CORROSION PROTECTION TESTED ON THE FOLLOWING FOR CHEMICAL RESISTANCE: 1. Resistance to HCl acidic water [dipped condition] - pH 2 - 21 days - passes - no loss of gloss or de bonding of coat. 2. Resistance to Sour Lime - 24 hrs - on surface - passes 3. Resistance to 30% commercial HCl - 24 hrs. - passes 4. Resistance to Inks, Grease, Gravy - 24 hrs. - passes 5. Resistance to Brake Fluid/ D.E.G. - 24 hrs. - passes 6. Temperature Resistance: Continuous: 250 deg. C, intermittent 500 deg. C 1st Coat - 80 sqft. - 300 sq.ft. - depending on substrate 2nd Coat - 200 - 400 sq.ft.