JIS G3106-2004 Rolled Steels for Welded Structure Tensile Test Chemical Compositions % thickness (t) mm Si Grade Yield Point N / mm2 thickness (t)mm t=16 245 min 235 min 215 min Impact test Charpy test Absorbed Tensile strength.
JIS G3106-2004 Rolled Steels for Welded Structure Tensile Test Chemical Compositions % thickness (t) mm Si Grade Yield Point N / mm2 thickness (t)mm t=16 245 min 235 min 215 min Impact test Charpy test Absorbed Tensile strength.
JIS G3106-2004 Rolled Steels for Welded Structure Tensile Test Chemical Compositions % thickness (t) mm Si Grade Yield Point N / mm2 thickness (t)mm t=16 245 min 235 min 215 min Impact test Charpy test Absorbed Tensile strength.
Chemical Compositions % Yield Point N/mm² Elongation Charpy Thickness Thickness (t) mm Tensile Test Absorbed Grade (t) mm Strength Thickness Test % Temp Energy C Si Mn P S 16<t 40<t 75<t 100<t N/mm² (t) mm Piece t≦16 min ℃ Average ≦40 ≦75 ≦100 ≦160 J 0.23 t≦50 max 2.5×C SM400A - ─ ─ 0.25 max 50<t≦160 max 205 6≦t≦16 No.1A 18 0.20 0.035 0.035 245 235 215 215 min t≦50 0.60 400-510 16<t≦50 No.1A 22 max 0.35 max max min min min min SM400B 40<t No.4 24 0 27min ~
0.22 max 1.40
50<t≦160 以下 0.18 0.35 1.40 SM400C t≦100 ─ 0 47min max max max 0.20 t≦50 max 0.55 1.60 SM490A ─ ─ 0.22 max max 50<t≦160 max 285 6≦t≦16 No.1A 17 0.18 0.035 0.035 325 315 295 295 min t≦50 490-610 16<t≦50 No.1A 21 max 0.55 1.60 max max min min min min SM490B 40<t No.4 23 0 27 min 0.20 max max 50<t≦160 max 0.18 0.55 1.60 SM490C t≦100 ─ 0 47 min max max max SM490YA 6≦t≦16 No.1A 15 ─ ─ 0.20 0.55 1.60 0.035 0.035 365 355 335 325 t≦100 ─ 490-610 16<t≦50 No.1A 19 SM490YB max max max max max min min min min 0 27 min 40<t No.4 21 SM520B 6≦t≦16 No.1A 15 0 27 min 0.20 0.55 1.60 0.035 0.035 365 355 335 325 t≦100 ─ 520-640 16<t≦50 No.1A 19 SM520C max max max max max min min min min 0 47 min 40<t No.4 21 6≦t≦16 No.5 19 0.18 0.55 1.60 0.035 0.035 460 450 430 420 SM570 t≦100 ─ 570-720 16<t No.5 26 -5 47 min max max max max max min min min min 20<t No.4 20 Remarks:1.Alloy elements other than those shown in the above table may be added necessary. 2.Impact test is applicable to thickness over 12.0mm of steel.