Professional Documents
Culture Documents
7. register is used for all data transfer between the 8051 and any external memory.
a)A b)B c)pc
10. determines which bank of register is currently in use at any time when the
program is running.
a)M0 &M1 b)RS0&RS1 c)none
16. When m1=0 and m0=1 then the timer will operate in
a)mode0 b)mode2 c)mode1
18. flags may be set when the INTX pins signals reaches a low level.
a)IEX b)TFX c)none
24. DPTR is used to fetch internal and external code and external data
a)DPTR b)PC c)none
25. Von neuman architecture uses memory for program and data.
a)same b)different c)none
30. .How many address lines are need to interface a 8051 with 8K RAM