Professional Documents
Culture Documents
双联全自动系列硫化机
Duplex Curing Press(300 ton)
全自动控制
附带推拉模装置
自动顶开模
Full automatic
Mold ejecting
Automatic mould
opening device
主要技术参数:
The Main Technical Parameter
1
EVA 发泡硫化机
EVA foaming vulcanizing machine
生产各种 EVA 发泡拖鞋,发泡板,保温材料,体育防护材料,救生衣,海绵等热固性
橡塑产品
温差小,保压性能可靠,硫化过程中
自动补压
主机采用铸钢结构,柱塞采用冷硬铸
铁,表面硬度为 HR-70
Produce various EVA foam slippers,
foam sheet, insulation materials, sports
protective material, life jackets, sponges
and other thermoset rubber products
Small temperature difference, reliable
pressure performance, automatically
pressure compensation during curing
process
Main frame use cast steel, piston adapt
chilled cast iron,,with surface rigidity
of HR-70
主要技术参数:
The Main Technical Parameter
产品型 Type XLB-DQ(柱)1200×1250×6/8.0 MN
公称合模力 Total Pressure (Ton) 800
热板规格 Plate Size (mm) 1200×1250×70
热板间距 Daylight (mm) 150
热板单位面积压力 Plate Unit Pressure (Mpa) 5.5
工作层数 Layer 6
柱塞行程 Piston Stroke (mm) 900
合模速度 Close Mould Speed (m/s) ≥45
开模速度 Open Mould Speed (m/s) ≥45
液压使用系统压力 Hydraulic System Pressure (Mpa) 18.1
液压缸直径 Cylinder Diameter (mm) Φ750
液压缸数量 Cylinder NO. (Set) 1
电机功率 Motor Power (kw) 15×2+11
重量 Weight (kg) 32500
青岛祥杰橡胶机械制造有限公司
Qingdao Xiangjie Rubber Machinery Co., Ltd.
600 吨压力机
600 Ton Hydraulic Press
主要技术参数:
The Main Technical Parameter
产品型 Type XLB-DQ(柱)1000×1000/6.0 MN
公称合模力 Total Pressure (Ton) 600
热板规格 Plate Size (mm) 1000×1000×80
热板间距 Daylight (mm) 1200
热板单位面积压力 Plate Unit Pressure (Mpa) 6.0
工作层数 Layer 1
柱塞行程 Piston Stroke (mm) 800
合模速度 Close Mould Speed (m/s) ≥20
开模速度 Open Mould Speed (m/s) ≥30
液压使用系统压力 Hydraulic System Pressure (Mpa) 13.6
液压缸直径 Cylinder Diameter (mm) Φ750
液压缸数量 Cylinder NO. (Set) 1
电机功率 Motor Power (kw) 14.0
重量 Weight (kg) 23000
延时保压,工作压力行程可在规定范围内调整,可实现手动,半自动和全自动三种方式
可根据要求定做 20T--2000T
适应于可塑性材料的压制工艺,如冲压、弯曲、翻边薄拉伸等,也可从事校正、压装、
塑料品及粉末制品的压制成型
3
下压式压力机
Downward Hydraulic press
用途/性能特点
可根据要求定做 20T to 200T.
适应于可塑性材料的压制工艺,如冲压,
翻边薄拉伸等,也可以重试橡胶,塑料拼
及粉末制品的压制成型。
Total pressure is determined by
custom’s requests from 20T to
2000T.
Adapted to the suppress techno-
logy of fictile material, such as
stamping, bending, stretching
thin flanging, also can engage in
calibration, pressure load,
plastic products and molding
powder products.
主要技术参数:
The Main Technical Parameter
press/mixer)
主要技术参数
The main technical parameter
5
Weight
青岛祥杰橡胶机械制造有限公司
Qingdao Xiangjie Rubber Machinery Co., Ltd.
抽真空硫化机
Vacuum vulcanizing press
7
Weight
青岛祥杰橡胶机械制造有限公司
Qingdao Xiangjie Rubber Machinery Co., Ltd.
A/E 系列橡胶注射成型机
9
■ 框式硫化机 plate vulcanizing press( frame structure)
自动推拉模硫化机
Auto push/out mold vulcanizing machine
自动推拉模平板硫化
机,集硫化工艺所需的
预压、自动放气、保压
硫化、自动出模等功能
于一体
分为电加热、蒸汽加热
和油加热三种形式
PLC 控制,操作安全方
便
Has a process of prepress,
automatically deflated,
curing, automatic
push-out mold etc.
It can be heated by
electricity, steam and oil
PLC control, safe and
convenient .
主要技术参数:
The Main Technical Parameter
1600/3000 吨液压式双层自动推拉模硫化机
1600T/3000T hydraulic Automatic Push/Out Mold Vulcanizing Machine
推拉模的工作方式有液压式和机械式,客户根据自己的需要选择,公司全新的设计理念,
雄厚的技术
力量和先进
的制造工艺,
确保生产的
每台设备都
能满足客户
的个性化需
求。
Push-pull
mode
device
works with
hydraulic
and
mechanical
type.
Customers
can choose according to their needs. The new design concept, strong
technical force and advanced manufacturing processes of the company
ensure that each device can be manufactured to meet customer’s individual
requirements.
主要技术参数: The Main Technical Parameter
产品型号 Type XLB-DQ XLB-DQ
1500X2000 3000X3000
公称合模力 (吨) Total Pressure (Ton) 1600 3000
热板规格(mm)Plate Size (mm) 1500X2000X90 3000X3000X100
热板间距(mm)Daylight (mm) 200 1600
工作层数 Layer 2 2
柱塞行程(mm)Piston Stroke (mm) 400 1000
合模速度 ( m/s) Close Mould Speed ≥ 16 ≥ 16
(m/s)
开模速度 ( m/s) Open Mould Speed ≥35 ≥35
(m/s)
液压使用系统压力(Mpa)Hydraulic 17.0 16.0
System Pressure (Mpa)
液压缸直径(mm)Cylinder Diameter Φ550 Φ800
(mm)
液压缸数量(组)Cylinder NO. (Set) 4 4
电机功率(kw) Motor Power (kw) 11.0+15 11.0X2+22
11
2500 吨机械式双层自动推拉模硫化机
2500T Mechanical Automatic Push/Out Mold double layers vulcanizing press
推拉模的工作方式有液压式和机械式,客户根据自己的需要选择,公司全新的设计理念,
雄厚的技术力量和先进的制造工艺,确保生产的每台设备都能满足客户的个性化需求。
Push-pull mode device works with hydraulic and mechanical type.
Customers can choose according to their needs. The new design concept,
strong technical force and advanced manufacturing processes of the
company ensure that each device can be manufactured to meet customer’s
individu
al
require
ments.
主要技
术参数:
The
Main
Technica
l
Paramet
er
13
热板单位面积压力 2.2 2.15 2.5 3.35 3.0 3.5
(Mpa)
Plate Unit Pressure
(Mpa)
工作层数 2 1 1 1 1 1
Layer
框式 2500 吨平板硫化机
2500 Ton vulcanizing press (Frame Structure)
青岛祥杰橡胶机械制造有限公司
Qingdao Xiangjie Rubber Machinery Co., Ltd.
主要技术参数:
The Main Technical Parameter
产品型 Type XLB-DQ3000x3000
公称合模力 Total Pressure (Ton) 2500
热板规格 Plate Size (mm) 3000x3000x90
热板间距 Daylight (mm) 1000
柱塞行程 Piston Stroke (mm) 1000
合模速度 Close Mould Speed (m/s) ≥15
开模速度 Open Mould Speed (m/s) ≥20
液压使用系统压力 Hydraulic System Pressure (Mpa) 16.5
液压缸直径 Cylinder Diameter (mm) Φ700
液压缸数量 Cylinder NO. (Set) 4
电机功率 Motor Power (kw) 11.0×3+15
15
■鄂式平板硫化机 plate vulcanizing press ( jaw type)
.鄂式胶条平板硫化机
Plate vulcanizing machine (Jaw Structure)
主要技术参数:
1000 吨胎面硫化机
1000T Tyre tread making machine
青岛祥杰橡胶机械制造有限公司
Qingdao Xiangjie Rubber Machinery Co., Ltd.
主 要
技 术
参数:(配自动推拉模)
The Main Technical Parameter ( matched with auto mould ejecting device)
产品型 Type XLE-Q5000×400×3/8.0 MN
公称合模力 Total Pressure (Ton) 800
热板规格 Plate Size (mm) 5000×400×70
热板间距 Daylight (mm) 150
热板单位面积压力 Plate Unit Pressure (Mpa) 4.0
工作层数 Layer 3
柱塞行程 Piston Stroke (mm) 450
合模速度 Close Mould Speed (m/s) ≥15
开模速度 Open Mould Speed (m/s) ≥15
液压使用系统压力 Hydraulic System Pressure (Mpa) 15.7
液压缸直径 Cylinder Diameter (mm) Φ285
液压缸数量 Cylinder NO. (Set) 8
电机功率 Motor Power (kw) 11+5.5
17
双鄂式平板硫化机
Plate vulcanizing machine (Double Jaw)
主要技术参数:
The Main Technical Parameter
产品型 Type XLB-DQ 5486×508/8.5×2 MN
公称合模力 Total Pressure (Ton) 850×2
热板规格 Plate Size (mm) 5486×508×70
热板间距 Daylight (mm) 400
热板单位面积压力 Plate Unit Pressure (Mpa) 3.0×2
工作层数 Layer 1
柱塞行程 Piston Stroke (mm) 380
合模速度 Close Mould Speed (m/s) ≥20
开模速度 Open Mould Speed (m/s) ≥25
液压缸数量 Cylinder NO. (Set) 8×2
电机功率 Motor Power (kw) 15.0×2+11
重量 Weight (kg) 48000
青岛祥杰橡胶机械制造有限公司
Qingdao Xiangjie Rubber Machinery Co., Ltd.
挡边带硫化机
Sidewall conveyor belt vulcanizing press
主要技术参数:
The Main Technical Parameter
19
鼓式硫化机
Rotating vulcanizer
用以连续硫化各种涂胶布类的一种设备,也用在人造革生产中。
This device is used to vulcanize adhesive cloth, also use in leather production.
主要技术参数:
The Main Technical Parameter
21
机械式硫化机
Mechanical Tire Curing Press
(Vertical Motion Curing Press)
规格从 1050(40.5″)至 5000(200″)
横梁运动形式有三种:垂直翻转式、垂直平
移式及垂直升降式。
中心机构类型有 B 型、C 型、RIB 型,环座
结构有整体式和焊接式
机械手驱动方式有链条式、液压驱动式、丝
杆驱动式供用户选择
卸胎机构采用垂直上升翻转式、镰刀式、叉
臂式
Specification ranges from 1050(40.5″)to
5000(200″)
Beam movement type: tilt-back, vertical
and side-back, complete vertical motion
Type of center mechanism: B,RIB,C
Manipulator has chain drive, hydraulic –driven, screw-driven
Three type of unloading: vertical raise flip-type, turing-over type and moving horizontally
type.
参数项 硫化室内 最大合模力 胎圈直径 调模高度 加热方 最大生 最大生胎
Item 径 Total force Diameter Mold 式 胎高度 直径
规格 ID of shield (KN) of bead (in) distance Heating height Diameter
Type (mm) (mm) method of tire of tire
1050(42’’) 1050 1320 12~16 178~381 650 700
1145(45’’) 1145 1720 12~18 200~430 热板式 650 800
1170(46’’) 1170 2160 13~18 200~440 Platen 450 870
1220(48’’) 1220 1920 13~20 300~505 450 900
1310(55’’) 1310 2890 15~20 245~445 Dome 760 1018
Mechanical
23
11.4
■捏炼机 Kneader
用于橡胶,塑料的塑
炼和混炼,也适用于
对粘稠物料进行混
合或捏合。
主要技术参数:
The Main Technical
Parameter
型号 Modle X(S)N X(S)N X(S)N X(S)N X(S)N X(S)N
X(S)N-55 X(S)N-75 X(S)N-11 X(S)N-15
-3×3 -5×3 -10× -20× -25× -35×
项目 Item ×30 ×30 0×30 0×30
2 2 32 32 32 30
捏合总容积
Total volume of mixing L 8 15 25 45 55 75 125 170 250 325
chamber
密炼总容积
Working volume of mixing L 3 5 10 20 25 35 55 75 110 150
chamber
驱动电机功率
kW 5.5 11 22 37 37 55 75 110 185 220
Driving motor power
翻转电机功率
kW 0.55 1.1 1.1 1.5 1.5 2.2 2.2 3 5.5 11
Tilting motor power
翻转角度
° 140 140 140 140 140 140 140 140 140 135
Tilting angle
转子转速(前/后) 30/24.
32/24. 32/23.
Rotational speed of the r/min 32/25 32/27 32/27 30/24.5 30/24.5 30/24.5 30/24.5
5 5 5
rotor (front /rear)
压缩空气工作压力 0.5~ 0.6~ 0.5~ 0.6~ 0.6~ 0.5~
MPa 0.6~0.8 0.6~0.8 0.6~0.8 0.6~0.8
Pressure of compressed air 0.8 0.8 0.8 0.8 0.8 0.8
压缩空气流量 m3/mi
≥0.3 ≥0.5 ≥0.5 ≥0.7 ≥0.7 ≥0.9 ≥1.0 ≥1.0 ≥1.5 ≥1.0
Capacity of compressed air n
冷却水压力(炼胶)
0.2~ 0.2~ 0.2~ 0.2~ 0.2~ 0.3~
Pressure of cooling water MPa 0.3~0.4 0.3~0.4 0.3~0.4 0.2~0.4
0.4 0.4 0.4 0.4 0.4 0.4
(rubber mixing )
加热蒸气压力(炼塑)
0.5~ 0.5~ 0.5~ 0.5~ 0.5~ 0.5~
Pressure of heating steam MPa 0.5~0.8 0.5~0.8 0.5~0.8 0.4~0.8
0.8 0.8 0.8 0.8 0.8 0.8
(plastics mixing )
外形尺寸 L ㎜ 2000 1850 2640 2675 2675 3200 3230 3325 4075 4250
Dimensions W ㎜ 1000 1200 1650 1650 1650 1900 1927 2615 2712 2750
(长×宽×高) H ㎜ 2220 2580 2350 2560 2560 2950 2958 3105 3580 4106
青岛祥杰橡胶机械制造有限公司
Qingdao Xiangjie Rubber Machinery Co., Ltd.
约重 Gross weight
t ~2 ~2.1 ~3.3 ~4 ~4.5 ~6.3 ~7.1 ~9.5 ~14.9 ~19.5
■挤出机 extruder
热喂料挤出机
Hot Feed Rubber Extruder
主要技术参数:
The Main Technical Parameter
型号规格 Type and spec. XJ-65 XJ-85 XJ-115 XJ-150 XJ-200 XJ-250
螺杆直径 Screw dia.(mm) 65 85 115 150 200 250
长径比
4 4.8 4.8 4.4 4.4 4.5
L/D
螺杆转速 20.27 27.40 22.4~ 19.7~
20~60 27~81
Screw rotational speed(r/min) 35.47 53.72 67.2 59.1
电动机动率
7.5 17 30 15.3~55 33.3~100 33.3~100
Motor power(kw)
长L 1600 2050 2770 3585 4549 4950
外形尺寸
宽 W 675 735 665 814 1140 1150
Overall dimension
高 H 1053 1275 1300 1470 1750 1483
生产能力(kg/h) 1500~
50~80 62~270 100~350 800 3500
Capacity (kg/h) 2200
25
总重量(吨)
1.5 1.6 3.3 4.5 7.21 9
Total weight(T)
冷喂料挤出机
Cold Feed Extruder
主要技术参数:
The Main Technical Parameter
型号 Model
XJ-85 XJ-150 XJ-200
项目 Item
螺杆直径
㎜ Φ90 Φ120 Φ150
Screw dia
螺杆最高转速
r/min 45 40 35
MAX. Screw speed
喂料辊直径
Mm 72 120 120
Feed roll dia
电动机型号及功率 采用 Z4 电机,其功率按配置机头而定
Motor model& power
Motor Z4,the power is decided according to the extrusion
head unit.
热水循环区段
Zone of hot water 3--4 3--4 3--4
Circulating
热水循环最大功率
Max power of hot water Kw 48 48 48
area
生产能力 (㎏/h) 按机头配置而定
Capacity
It is decided according to the extrusion head unit.
外形尺寸 L ㎜ 3045 4250 4277
Overall dimensions W ㎜ 2050 2290 2211
青岛祥杰橡胶机械制造有限公司
Qingdao Xiangjie Rubber Machinery Co., Ltd.
H ㎜ 1453 1490 1503
约重 weight t ~5 ~5.5 ~8
主要用于切割天然橡胶,合成橡胶及
其他塑性材料,适合安装在密炼机旁,
切割小块胶料。本机主要有切胶刀、
机架、工作油缸、底座、辅助工作台、
液压系统及电气系统等部分组成。切
胶刀下面的底座上装有尼龙垫板,以
保护切胶刀的刀刃。机架上装有限位
开关,以控制换向阀改变切胶刀的运
动方向,同时也可保护活塞缸缸盖。
It is mainly used for cutting natural
rubber, synthetic rubber and other
plastic materials, and is suitable for
installing near the mixer. This bale
cutter is composed of knife ,frame,
working cylinder, base, auxiliary
table ,hydraulic and electrical system
etc.. Base with nylon mat protect the
knife blade .Limit switched is mounted
on the frame to change movement direction of the cutter, and protect the cover of the cylinder.
主要技术参数:
The Main Technical Parameter
产品型号
XQL-8 XQL-16
Type
切胶机宽度(mm)
660 1000
Width (mm)
切胶机行程(mm)
680 680
Stroke (mm)
油缸直径(mm)
150 150
Diameter of the piston (mm)
切胶行程时间(s)
16~25 10~16
Time Taken by the Stroke (s)
功率(KW)
5.5 5.5
Power (kw)
外形尺寸(长×宽×高)
1900×720×2580 2240×720×2580
Overall Dimension (L×W×H)
重量(kg)
1500 2000
Weight (kg)
27
■ 输送带生产线 conveyor belt line
钢丝绳输送带生产线
Steel Cord Conveyor Belt Production Line
辅机:锭子架、张力站、固定分梳、成形车、多功能拉带机组、(液压切带机)、
卷取包装机等设备装置。
功能:能
够实现钢丝
绳芯输送带
在张力 情况
下成型硫化
的生产工艺
要求。钢丝
绳直径最细
φ2.5mm,最
粗 为 φ
13.0mm;
电控系统
采用 PLC 控
制,可以实
现手动和自
动两种方式。
Component ,host and.
Auxiliary equipment include creel ,tension stand ,fixing carding ,multi-function belt
stretching machine ,hydraulic cutting machine, take-up device packing machine and other
equipment.
Function .The whole production line can realize the production process requirements of
vulcanizing the tension steel cord conveyor belt. Diameter range of steel isφ2.5mm to φ
13.0mm.
Electric control system adopts PLC control ,can achieve manual and automatic mode.
主机技术参数:
The Host Technical Parameter
产品型 Type XLB-Q2000×10000/80 MN
公称合模力 Total Pressure (Ton) 8000
热板规格 Plate Size (mm) 2000×10000×90
热板间距 Daylight (mm) 350
热板单位面积压力 Plate Unit Pressure (Mpa) 4.0
液压使用系统压力 Hydraulic System Pressure (Mpa) 17.5
输送带生产线
Conveyor Belt Production Line
青岛祥杰橡胶机械制造有限公司
Qingdao Xiangjie Rubber Machinery Co., Ltd.
辅机
导开装置,牵引装置,拉伸装置(前拉伸,夹持,后拉伸),卷取装置,修
29
补机。
Auxiliary Machine
Guide open device, traction device, stretching device (before stretching, clamping,
after stretching ), coiling apparatus,repairing machine.
主要技术参数:
The Main Technical Parameter
产品型 Type XLB-DQ(框)1600×10000/48 MN
公称合模力 Total Pressure (Ton) 4800
热板规格 Plate Size (mm) 1600×10000×90
热板间距 Daylight (mm) 300
热板单位面积压力 Plate Unit Pressure (Mpa) 3.0
工作层数 Layer 1
柱塞行程 Piston Stroke (mm) 300
合模速度 Close Mould Speed (mm/s) ≥10
开模速度 Open Mould Speed (mm/s) ≥10
液压使用系统压力 Hydraulic System Pressure (Mpa) 15
液压缸直径 Cylinder Diameter (mm) Φ450
液压缸数量 Cylinder NO. (Set) 20
电机功率 Motor Power (kw) 11×2+22
重量 Weight (kg) 165000