Professional Documents
Culture Documents
Reference ASME Y14.5M - 1994 by David Hebert (GD&T Senior Level Certified but not associated with ASME) Test # - 1994-TL4-T01A-RevA
Which Geometric control below is used only for individual features (non related)?
A B C D
7/24/2011 If errors are found, or if you have any questions, please send an email to dhebert1000@yahoo.com 2
A B C D
7/24/2011 If errors are found, or if you have any questions, please send an email to dhebert1000@yahoo.com 3
A B C D
7/24/2011 If errors are found, or if you have any questions, please send an email to dhebert1000@yahoo.com 4
A B C D
7/24/2011 If errors are found, or if you have any questions, please send an email to dhebert1000@yahoo.com 5
A B C D
7/24/2011 If errors are found, or if you have any questions, please send an email to dhebert1000@yahoo.com 6
A B C D
7/24/2011 If errors are found, or if you have any questions, please send an email to dhebert1000@yahoo.com 7
A B C D
7/24/2011 If errors are found, or if you have any questions, please send an email to dhebert1000@yahoo.com 8
A B C D
7/24/2011 If errors are found, or if you have any questions, please send an email to dhebert1000@yahoo.com 9
A B C D
7/24/2011 If errors are found, or if you have any questions, please send an email to dhebert1000@yahoo.com 10
A B C D
7/24/2011 If errors are found, or if you have any questions, please send an email to dhebert1000@yahoo.com 11
A B C D
7/24/2011 If errors are found, or if you have any questions, please send an email to dhebert1000@yahoo.com 12
both A and D
A B C D
7/24/2011
both B and C
If errors are found, or if you have any questions, please send an email to dhebert1000@yahoo.com 13
A B C D
7/24/2011
both B and C
If errors are found, or if you have any questions, please send an email to dhebert1000@yahoo.com 14
A B C D
7/24/2011
both B and C
If errors are found, or if you have any questions, please send an email to dhebert1000@yahoo.com 15
A B C D
7/24/2011 If errors are found, or if you have any questions, please send an email to dhebert1000@yahoo.com 16
A B C D
7/24/2011 If errors are found, or if you have any questions, please send an email to dhebert1000@yahoo.com 17
A B C D
7/24/2011 If errors are found, or if you have any questions, please send an email to dhebert1000@yahoo.com 18
A B C D
7/24/2011
both B and C
If errors are found, or if you have any questions, please send an email to dhebert1000@yahoo.com 19
A B C D
7/24/2011
A B C D
7/24/2011
A B C D
7/24/2011 If errors are found, or if you have any questions, please send an email to dhebert1000@yahoo.com 22
A B C D
7/24/2011
Geometric tolerance zones are always circular or cylindrical Geometric tolerance zones are sometimes triangular in shape (datum targets) True position may have rectangular and cylindrical tolerance zones There are no spherical tolerance zones in the standard
If errors are found, or if you have any questions, please send an email to dhebert1000@yahoo.com 23
A B C D
7/24/2011 If errors are found, or if you have any questions, please send an email to dhebert1000@yahoo.com 24
Which of the following may have a larger actual mating size than limits of size allows?
A B C D
7/24/2011 If errors are found, or if you have any questions, please send an email to dhebert1000@yahoo.com 25