Professional Documents
Culture Documents
Related specifications:
AS 1239 ASTM A 681 BS 4659 BS EN ISO 4957 JIS G 4404 Werkstoff H13A H13 UNS T20813 BH13 X40CrMoV 5-1 SKD 61 1.2344 X40CrMoV5-1
Harden: Preheat at 650C 850C Raise to 1020C-1050C Cool in air, oil or into salt bath held at 500C-550C and then air cool. Temper: at 500C 650C Cool in still air Double tempering recommended
Typical Hardness / Applications Air cooled at 1020C1050C & tempered Temper HRC Typical Applications Swaging dies 500C 53 55 Ejector pins & nozzles for tin, lead or zinc die casting 550C 52 - 54 Blanking & bending dies. Aluminium die casting dies 575C 50 52 Gripper and header dies. 600C 47 50 Forging dies and inserts, extrusion dies, mandrels etc. 610C 46 49 Hot shears, forming dies and punches. 620C 44 48 Heat treatment and typical hardness for guidance only
70
65
60
55
50
45
40
35