Professional Documents
Culture Documents
Page 00
Description of Product Features Chapter 1 Chapter 2 Basic Operation
1.1 Product Functions Picture mode selection: LCD 2.1 Operation Description of Remote Controller
Display has numerous preset modes
Main functions: for Display Selection of colour,
brightness & Contrast etc 2.1.1 Illustrative Overview of Remote Controller
DVD, AM, FM, TV & CDC (multiple-
disk changer), Packing sensor Bluetooth Function:
,A/V,GPS,Bluetooth, rearview mirror For drivers who fitted with bluetooth
for backing,built in Amplifier 4 Ch. mobile phone, this unit has a digital
Output standard vehicle four speaker dial interface to call others too. 2 3
Screen.
DISPLAY
Touch-Panel Function: 1 2 3
1.2 Product Application 5
7
Icons on the Touch Panel. Adapting High Definition TFT
4 5 6
6
7 8 9
Radio, TV Tuner, 4 speaker 45Watt 10
Enjoy from any viewing angle Amplifier, Backing Camera, Compact SETUP
9
10++ 0
Automatic storage: All TV and Disc Changer,GPS and Bluetooth 12
Radio station are stored on the found functions. this product has such 11
ENTER MODE
13
18
16
NTSC modes with a wide range of field of view, bright & realistic colours, 21 19
application and good compatibility. as well as compact 2 DIN size. This FUNCTION
22
All function of this unit can be special purpose vehicles and buses 23
25
SARC-06A
Night time Illumination:
When getting dark if this function is
activated,nighttime illumination will
turn on automatically.connect light
blue wire+ 12V.
Signal selection:
Two-channel video output, and
left/right preamp audio output.
Automatic detection for backing:
Automatically switch to backing
Page 01 Page 02
Basic Operation Chapter 2 Chapter 2 Basic Operation
2.1.2 Function Description of Remote 12. Confirm button: To confirm the items for adjustment in OSD mode. 2.2 Schematic Diagrams of
Controller's Buttons setting of each function. Then press function button to the Output Ports on the
confirm.
13. Select button: Press this button Back Panel
to cyclically select and switch to the 21. Function button: Press this
1. Power button:Press this button to play mode for DVD, FM, AM, CDC button (or MENU button on the Connection 1
power ON/Off the unit. and TV. . panel) to call in OSD display. It can
be confirm when selecting OSD 1.Ant VCC(brown).power antenna
2. Time button:press this button to 14. Function button: Press this
button (or MENU button on the menu. When Connect with the switch of grip
turn On/Off the time Display Real
Time Clock. panel) to call in OSD display.press 22.Stop button: In DVD play mode, brake(ov is available)
twice exit OSD display. press this button to stop playing
3. Menu button: Press this button to Automatically closed on the screen
15. Mute button: In the normal mode, DVD, which depends on the disc.
call in/out PBC menu. when unclinching the grip brake,
press this button to disable sound please connect with the GND line
4. Eject button: When a disc is insert
output. Cancel mute function by 23. FR button: In the play mode, when don’t connect with the grip
press this button to eject.
pressing again. continuously press this button to brake, otherwise there is not image
5. Display button: When in DVD
16. Angle button: In DVD play mode, play back at a speed varying from2 2.parking brake(white), used to
mode, press to display current DVD
press this button to select images to 20 times.short press to select connected to the motor antenna
Mode.
to be played from different angles OSD menu. control end.
6. Numeric button: On DVD mode ,it (Effective only when it is supported 24. Forward song selection button: 3.amplifier connector(gray),
is used to select songs. by the disc). Press this button for once to skip
7. Sound track button: In DVD play 17. Search button: In DVD play forward by a song in DVD and used to connect to outside amplier
mode, press this button to cyclically mode, press this button and CDC play mode and tune forward if 4.reverse back car(purple)
switch to different sound channel numeric button to select the it is in AM, FM & TV mode.
output. programme or time to play. 5.Night time illumination wire(blue)
25. FF button: In the play mode,
8. Title button: In DVD play mode, Effective when it is supported by continuously press this button to used to connect to the switch of
press this button to return to Title the discs.In TV, AM & FM mode, it play forward at a speed varying little light(12V allowed)
mode. is used for automatic tuning. from 2 to 20 times. Short press to 6.ACC +12V(red), used to connect to
9. Setup button: In DVD mode, press 18. Backward song selection select OSD menu. ACC power switch
this button to call in "Menu button: Press this button for once 26. Play/pause button: Press this
Setting" to set each parameter. to skip backward by a song in 7.Grounding Cable (black), used to
button to cyclically switch to Pause
Refer to Section 3.3.8(Page10) DVD and CDC play mode and connect to the clean and bare metal
and Play. In AM, FM & TV mode,
for details. tune backward if it is in AM, FM & part of the vehicle chassis.
press this button to tune forward.
TV mode. 8.12V battery cable(Yellow), used to
10. 10+ button: When input num-
bers, press this button to add 10 to 19. Repeat button: In DVD mode, connect to the vehicle battery to
the input number. press this button to repeat a single supply uninterrupted 12V DC
song, section or full disc or cancel power.
11. Up/Down/Left/Right button: the repeat function.
Used to select items in DVD
setting mode. 20. Volume adjustment/Up/Down
button: Press "+, -" button to
adjust the volume. Press
Page 03 Page 04
Basic Operation Chapter 2 Chapter 2 Basic Operation
Radio
speaker on the rear part of the
vehicle.
Antenna socket, used to connect
TV 8.Rear right positive terminal of outside of the vehicle.
speaker(purple) used to connect
CONNECTION1 CDC connecting port, used to
to the positive terminal of the right
CONNECTION2 CASYS
CONNECTION 3
7
8
5
6
3
4
1
2
speaker on the rear part of the
7 5 3 1
1 2 1 2 1 2 3
8 6 4 2 vehicle. CDC (6~10 disks changer )
3 4 3 4 4 5
5 6 5 6 6 7 8
Connection 3
A B C
1please see the detailed diagram
Black
Yellow
Gray
Whi t e
Purple
Brown
Blue
Red
G reen/blac k
Purple
Gr e e n
Gray/ black
White/black
Gray
White
Purple/ black
7 5 3 1 7 5 3 1
RR-
RL-
GND
FR-
B ACK- CA R
FL-
LIGHT+
ANT- VCC
8 6 4 2 8 6 4 2
FL+
RR+
FR+
RL+
AMP-CON
Brake-check
BATT+
AC C
GPS
CDC
Two cha nn el vi de o out pu t
GND
A Car telephone mute
Audio-r output
Audio-l output
Camera video input
CDC video inp u t
B GND 2.3 Schematic Drawing of Panel Functions
Connection 2 GND
Video input2
Video input1 TFT monito r
1.rear left negative terminal of the Audio-r input
speaker(green and black), used C GND
Audio-l input1
to connect to the negative terminal Steering wheel +
POWER Receiving port of remote control signal
Steering wheel -
of the left speaker on the rear part Audio-r input2
Volume + MENU
of the vehicle. 7
8
GND
Audio-l input2
Volume - SELECT
MUTE Step backward
2..Rear left positive terminal of Step forward
5.Front right negative terminal of Mode
speaker(green), used to connect PLAY/PAUSE
the speaker(gray and black), use EJECT PANEL
to the positive terminal of the left
to connect to the negative terminal
speaker on the rear part of the
of the right speaker on the front
vehicle.
part of the vehicle.
3.Front left negative terminal of the
6.Front right positive terminal of
speaker(white and black), used to
the speaker(gray), use to connect
connect to the negative terminal of
to the positive terminal of the right
the left speaker on the front part of
speaker on the front part of the
the vehicle.
vehicle.
4.Front left positive terminal of
7.Rear right negative terminal of
speaker(white), used to connect to
speaker(purple and black), used
the positive terminal of the left
to connect to the negative terminal
Page 05 Page 06
Basic Operation Chapter 2 Chapter 3 Description of Main Functional Operations
2.4 Product Appearance 3.1 Basic Operation button again, the system will exit the
mute mode and recover voice output.
1. Switch on/off
DISC PORT 5. Display and Tuning of Time
EJECT BUTTON Turn on the power supply with the
On DVD mode car key, the power supply of the Press the TIME button on the panel
Press here to player will be automatically switched or the remote controller, the time
on and the system will return to the display will be switched on or off.
stretch or Press the "TUNING" button on the
close the state when it was switched off. Press
the power button to switch off the remote control, the time display will
display angle player if you don't want to use it. switch circularly between "hour-
minute-second". Press the "+/-"
2. Function modes switch button, now you can change the value
Press the SELECT button on the of hour, minute and second respec-
panel or remote controller, you can tively.
have the player circularly switched 6. Supported Disc Types
among the following modes: DVD,
AM, FM, CDC and TV. (Remark: CDC DVD, DVCD, VCD, CD, CD-RW,
Panel Spreading Mp3, etc.
can only be played when the player is
configured with CDC player.) 7. Rotary panel
The player has to be restarted if it is Press button on the panel or
powered off. The player will automati- remote controller to rotate the panel
cally recover the mode when it is or adjust the angles of the screen, and
powered off. the original position can be restored.
If you place a disc into the player, it (a) Press on the panel or the
will automatically switch to DVD mode controller for remote before launching
no matter which mode it is in. , then the panel will be totally
launched.
3. Volume Control
(b) After launching totally, a brief
Press the "+/-" button on the press of on the panel or the
panel or remote control when the remote controller will make the panel
player is in normal play state, you can draw back (6-7mm), another press
Panel Closing change the volume to meet your will lead it draw back again.
requirement.
(c) A long time press will draw it back
Note: 4. Mute Control completely.
The Company is actively engaged in improving the product quality and If you don't need the voice output in Note:
offering update version of the product. The appearance, functions or design the normal play, press the mute a brief press: Means that the
button on the panel or the remote effection time on this key is equal to
of the product may be a little different from those in the manual. And the controller. The symbol of "Mute" will or less than 1 second (just once of
actual product prevails. The Company will not give any notice for the be display on the screen and the the buzzer);
changes. Please forgive for this. system will be in mute state. Press the
a long press: Means that theeffection
Page 07 Page 08
Description of Main Functional Operations Chapter 3 Chapter 3 Description of Main Functional Operations
time on this key is more than 1 switched off. The whole system can (1) Play/Pause/Stop. Press the Randomly Press either place of the
second (twice of the buzzer). be operated after that. Play/Pause/Stop button on the picture under TV play state.
8. Eject disc This machine has touch panel screen; the machine will execute 3. Radio Function
function. The main menu is shown relative operation. The current status Press radio symbol under main
As the key for exiting disc hides will be shown on the left upper side
behind the panel,so it can be as Drawing OSD0001, which has 5 menu to enter radio play menu, as is
functions: DVD, TV, Radio, of the screen. shown on Drawing OSD0004.
appeared just when the panel has
been launched completely, and then CDC,GPS,A/V/Bluetooth and Setting (2) Song skipping: Press "Last
12: 00
etc. Just Press the screen to get song"/ "Next Song" to skip backward F M/ A M FM 106 .2MH Z
you can operate manually only.[
what you want, or press the or forward. HOME M01 M02 M03 M04 M05 M06
different from the
Up/Down button on the remote (3) Main Menu: Press this button to MUTE 15
key on the panel and the remote controller to cyclically choose the return to main menu which is shown
controller (rotary key )] functions. Press the function button as OSD0001 (This function works
Detailed steps were show as on the remote controller to confirm OSD-0004
the same in all state. No further Detailed operation can refer to
following: the current choice. The "+/ -" On the
explanation will be listed) chapter 3.5
(a)Pressing on the panel or the remote controller can increase or
decrease the value of current state. (4) Volume Adjustment: Press "+, -" (1).AM&FM. Switch between AM &
remote controller to make it launch button to adjust the volume (This
completely; 1. DVD Function FM
function works the same in all state.
(b)Pressing near the exiting slot Insert DVD, VCD discs etc, and (2).Search station, select station -,
No further explanation will be listed.)
in the back of the panel, the disk will Press DVD symbol on the screen, select station +, adjustment -,
(5) Mute button: Press this button adjustment +, store station. Refer to
exit about 2 seconds later. the player will start reading the disc
and "Muting" will be shown on the Chapter 3.5 for detailed functions
and play the picture on full-screen.
screen. The whole system will be in
3.2 Description of Touch Detailed DVD operation can refer to mute state. Press again; it will
4.Bluetooth Function
Panel Operation chapter 3.3. In the play state, by resume the Sound Output (This Press symbol under main menu to
Pressing either position of the function works the same in all state. enter bluetooth menu, as is shown
When you press POW button on the screen or pressing the Menu button No further explanation will be listed) on drawing OSD0005.
panel or the remote controller, initial on the panel on the Function button Scre e n
2. TV Function Bluetooth signal
setting "Do not watch me when on the remote controller, it will return
to main menu which is shown as Touch the TV symbol under main
driving" will be displayed. Then it will menu, TV will be shown on full- On C off
-
12: 00 enter Picture adjustment menu.( Adjustment menu. The default
D I SC L 01 : 0 1 : 05 MUTE Shown as OSD0008). Light, setting is main volume. Press “ IMAGE AUDIO TIME BELL
15
contrast, color of the picture can be +/-“ on the right side of the menu SETUP
adjusted when the disc is to increase or decrease the volume.
HOME EXIT
continuously played. Just press “ (3)Time Setting: Touch TIME symbol
BLACK CODE HOME EXIT
EXIT
right speaker, central speaker, base, is shown as “ On” sound will be
rear left speaker and rear right heard when touching the symbol.
OSD-0007
speaker. OSD-00013
Page 11 Page 12
Description of Main Functional Operations Chapter 3 Chapter 3 Description of Main Functional Operations
“ On” sound will be heard when recovered. Programs will be displayed on the Osd Chi nese English
chinese
touching the symbol. 4. Sound Channel Switch: Press the screen. If the file is a JPEG/GIF/BMP Subtitle English
(7)Exit. Press Exit button to return to “ Sound Channel” button on the image, the screen will display the Audio English
Dvd menu English
normal play state. panel or remote controller, the player image file in full screen for 5 Osd menu open
is in normal play state. It will switch seconds and then the player will
(8).Exit automatically execute the next file.
Language setting
between Sound channel 2 and
Touch Exit Symbol in Main Menu to Press the STOP button on the Osd menu:English,Chinese
Sound channel 5.1. For details, Subtitle:English,chinese,AUTO,OFF
exit OSD menu and return to play please refer to chapter 3.4. remote control, the player will return
state. AUDIO:English,Chinese
to SMART NAVI mode. DVD Menu:ENGLISH,Chinese
5. Skip: Press the Forward or
OSD Menu:on,off
3.3 DVD Operation Backward button on the panel or the
remote controller, the player will skip 1/320 00:01:56 Language Video Audio Rating
Description forward or backward to play the next
MP3
1 001 6 006 Tv s h ape 4:3
2 002 7 007 Tv system NTST NTSC
or previous program. PAL
1. Switch the machine to DVD mode 3 003 8 008 video out S- v i d e o
PAL 60
and insert disc( Note: place the side 6. Play on Demand: Press the 4 004 9 009 AUTO
Search button on the remote 5 005 10 010
with words upward), the machine will File:001
Tv setting
start reading disc and begin to play controller, the player will switch
between chapter mode and time Tv sh ap e: 4: 3, 16 :9
10 seconds later.
selection mode. Then press the tv sy st em :N TS C, PA L, PA L 60 ,A UT O
2. Disc eject: Press button on the 8. On-Screen Menu Setting Vi de o ou tp ut :S -v id eo ,Y UV ,R GB
digital buttons on the remote
panel or remote controller to rotate In DVD mode,press the
]controller, the player will start from
the panel totally.Pressing near SETTING button on the remote Language Video AUDIO RATING
the chapter or time selected to play
the exiting slot in the back of the controller, the setting menu can be subwoofer on on
the disc. Press the Fast Forward/ off
panel, the disk will exit about 2 loaded (as shown in the following
pink noise off
Fast Backward button on the remote Dre off
seconds later. figure). Select the options with the
controller when the player is in play Audio setting
NOTE:If the panel has not been state, the player will skip forward or UPWARD/DOWNWARD/
totally launched , you press behind backward with a speed 1 to 8 times LEFT/RIGHT and CONFIRM button subwoof er :on ,off
the panel , the disk will not exit.(for of that of the normal play. on the remote controller to define pi nk noi se :off ,lef t,right
example: you press on the panel your favorite setting. DRE:off,on
7.Digital video( MPEG, MP3,
or the remote controller again when Basic Operation:
JPEG/GIP/BMP )can be played in
its rotating, which will make the
DVD mode. UPWARD/DOWNWARD button is Language Video Audio Rating
panel draw back again after totally
launching ; Or you have pressed of (1) Place the disc into the chassis, used to select the options upward and passward ---- 1.kid 1.kid
panel or the remote controller shortly the player will read the content in the downward, LEFT/RIGHT button is to rating-3yg reset 2.G
Load factory 3.PG
after the panel has launched disc automatically and enter into switch between the main menu and 4.PG-13
the submenus. The sunken option is 5.PG-R
totally,in this case ,the disk will not SMART NAVI mode (displayed on 6.R
exit although you press the key in the screen), as shown in the figure at the option for setting. The option in 7.NC-17
8.adult
the back of the panel.) the right lower side. white is the currently selected option. Passward setting
And the CONFIRM button is used to
3. Pause/Play Button: Press Pause (2) Play MPEG or MP3: The player Passward:four digital
confirm the currently selected option
button on the panel or remote will play music according to the play rating:1.kid safe,2.G,3.PG
as the current setting. 4.PG-13,5.PG-R
controller, the play will be paused. modes in PLAY MODE. The current
6.R,7.NC-17,8.adult
Press again, normal play will be playing time, the current program SN load factory:reset
Page 13 Page 14
Description of Main Functional Operations Chapter 3 Chapter 3 Description of Main Functional Operations
3.4 TV Operation 3.5 Description of 3.6 AV/bluetooh Operation second after the start of the
Description AM/FM Radio Operation Description program, the system will skip
forward or backward to play the next
1. Press the SELECT button on or previous program. If you press
1. Press the SELECT button on the panel
the panel or the remote control 1.bluetooth and AV is switchable. the button when the program has
or remote controller to switch the system
and switch the system to the radio been played for
3.7 CDC Ope
ration
Description
Page 15 Page 16
Description of Main Functional Operations Chapter 4 Chapter 5 Description of Main Functional Operations
3. The product is a laser device. Do 3. Do not place the disc in the place
not directly look at the laser beams. with direct sunshine, dirt or
Two M5 screws for each side. 4. The player shall only be opened dampness.
by professionals. The player shall 4. Do not use irregular disc.
be repaired by professionals or in
designated maintenance center. 5. Gently wipe the disc surface with
Do not try to repair it yourself. soft wet cloth to clean the disc. If
the disc is too dirty, wipe the disc
with wet cloth bedewed with
1. Place the player into the installation slot. 5.2 Safety Instructions propanol. Do not use dissolving
2. Check if the electric connection of the back panel is correct
agents, such as gasoline and
according to the operation manual (refer to page 5 and 6). 1. Switch off the TFT monitor when attenuant.
3. Use proper tools to install the screws. driving.
Page 17 Page 18
Main Performance Indices Chapter 6 Chapter 7 Safety Instructions
Page 19 Page 20