You are on page 1of 19

Home News Telephony Statistics Members Groups Forums Blogs Activity

by Shri

SMS in GSM Network


Jul 19, 2010 at 9:45 am in GSM by Shri Tags: Beginners, GSM, Mobile, SMS, Telecom

SMS Basic : SMS (Short Message Service) is the transmission of short text messages to and from a mobile phone, or any other device capable of generating the SMS. It is composed of a maximum of 160 characters, each coded on 7 bits (GSM) or 140 bytes. End to end SMS delivery completes in two parts, First SMS submission in SMSC (Short Message Service Centre) by originating subscriber, second Delivery of SMS to recipient subscriber. So SMS is a Stored and Forward Service. Once a message is sent, it is received by a Short Message Service Centre (SMSC) of the calling subscribers network, which then delivers it to the appropriate destination device.

In the GSM SMS delivery, SMS termination does not require the SMSC of the recipient subscribers Operator. However In CDMA (Code Division Multiple Access) network or GSM to CDMA SMS transfer, or in case of some services like Push SMS, the recipient SMSC is also used for terminating the SMS to the recipient. In all these types of SMS transfer, the air interface-signalling channel is extensively used for terminating the SMS traffic.

SMS uses the signaling channel (not dedicated), so it can be sent/received simultaneously with the voice/data/fax service over a network.

SMS Text Length:

The short part refers to the maximum size of the text messages: 160 characters (letters, numbers or symbols in the Latin alphabet). For other alphabets, such as Chinese, the maximum SMS size is 70 characters. Types of SMS : With the growing convergence Technology of networks and services, SMS can be send from a mobile phone, fixed phone, or even via the Internet. On the basis of originating and terminating identities, SMS can be broadly classified into the following 4 categories : P2P, A2P, P2N & I2P.

P2P (Person to Person) : In Person to Person (P2P) mode, the SMS is between two individual subscribers. The SMSC or originating operator stores the SMS & sends it to the recipient, either directly or in case of GSM to CDMA or CDMA to CDMA network, through the SMSC of the terminating operator. A2P (Application/Advertiser to Person) : In Advertiser/Application to Person (A2P) SMS mode, advertising agencies have a commercial agreement with one or more service providers. Advertisers provide the messages and mobile numbers to an operator, who then sends the messages in broadcast mode to the recipients. If the SMS transfer is onnet, then SMS moves only within the network of one operator and hence there is no issue of loading resources of other operators, but if the recipient subscriber is attached with another operator, then the resources of the terminating operator are also used for delivering of such SMSs. This type of SMS delivery is also termed as Push method. P2N (Person to Network) or P2A (Person to Application) : The Person to Network (P2N) SMSs are usually an on-net service. In this type mode, the content provider usually has a revenue share agreement with the service provider. The operator gives the content provider a 4-5 digit short SMS code. The content provider then uses the short codes to provide different kinds of services like astrology information, ring tones, picture downloads, tele-voting, games, etc. Operators charge premium rate for these SMS to the short codes. I2P (Internet to Person) : The Internet to Person (I2P) arrangement allowed by some operators with the provision of a web interface enables a person to send an SMS from the Internet to mobile subscribers. They also accept SMS originating from the Internet messaging web sites. SMSC HLR MSC

Basic SMS Network Element :

VLR BSC BTS UE (User Equipment : Mobile/Laptop/Fixed Phone)

SMS is carried on a signaling channel of air interface from mobile handsets to the Base Transceiver Station (BTS), and thereafter it is carried on the Signaling System 7 (SS7) signalling channel throughout BSC, MSC/VLR, SMSC. Basic SMS Call Flow : End to end SMS transaction completes in 2 parts :

Message submission by originating subscriber to its SMSC (Mobile Originating Part) Message delivery by SMSC to recipient Subscriber (Mobile terminating Part)

Basic end to end SMS call flow shown in following diagram :

SMS Originating Part MO SM Submit : The SM is sent from the originating Mobile Station (MS) to the serving Mobile Switching Center (MSC). The address of the SMSC where the SM should be submitted to is stored on the SIM card of the subscriber and forwarded to the MSC with the message. The MSC forwards the SM to the SMSC. The SMSC returns a positive (ACK) or negative (NACK) response indicating whether the message was successfully stored of not. To delivers a SM SMSC has to find out the location (serving MSC) and the International Mobile Subscriber Identity (IMSI) of the recipient subscriber first. This information (routing information) is retrieved from the Home Location Register (HLR) of the recipient subscriber based on the recipient number (MSISDN). HLR Provides routing Information to SMSC, which includes IMSI and serving MSC of recipient number. Based on routing information SMSC delivers SM to the serving MSC and MSC forwards it to the recipient Mobile Station.

SMS Terminating Part MT SM Deliver :

SMS Delivery Report : Successful Delivery On successful delivery SMSC sends delivery report to the originator if requested.

Failed Delivery If SMS is not delivered to the recipient number SMSC send failure reason to the originator. Permanent Error : For example Unknown Subscriber Temporary Error : For example Absent Subscriber

SMSC Retry : In case of temporary errors the SMSC schedules a next delivery attempt, called SMSC retry. Network Trigger : If the subscriber is not reachable (absent) the SMSC notifies the HLR that there is a message waiting for the recipient number. When the HLR detects the presence of the subscriber, it alerts the SMSC and SMSC forwards SM to the serving MSC. Regular SMS Messages : Send Routing Information for Short Message (SRI-SM): Between Origin SMSC and Destination HLR, to retrieve the routing information needed for routing the short message to the servicing MSC. Mobile Originating Forward Short Message (MO Forward SM): Between Origin MSC and Origin SMSC, to forward mobile originated short messages. Mobile Terminating Forward Short Message (MT Forward SM): Between Origin SMSC and Destination MSC, to forward mobile terminated short messages. Send-Info-For-MO-SMS: Between the Origin MSC and VLR, to request subscriber related information from the VLR. Send-Info-For-MT-SMS: Between the Destination MSC and VLR, to request subscriber related information from the VLR. Report Short Message Delivery Status: Between Origin SMSC and Destination HLR, to set the Message Waiting Data into the HLR or to inform the HLR of successful SM transfer after polling. Alert Service Centre: Between Destination HLR and Origin SMSC, to inform SMSC that a subscriber, whose MSISDN is in the Message Waiting Data file, is active or the MS has memory available. Inform Service Centre: Between Destination HLR and Origin SMSC, to inform the SMSC which MSISDN number is stored in the Message Waiting Data file, or to provide status on different messaging flags. Ready For Short Message: Between the Destination MSC and Destination VLR as well as between the Destination VLR and the Destination HLR. The MSC initiates this service if a subscriber indicates memory available situation. The VLR uses the service to indicate this to the HLR. SMS Applications :

Text message exchange between Mobile subscriber. Ring Tone

Logo Stock Information Tele-Voting (TV Show) Vending machine Remote Management

43 Comments

1. Tiger said on Sep 26, 2010: Log in to Reply What is the difference between MAP opcode 44 (mt-forwardSM) and MAP opcode 46 (commonly called mo-forwardSM) which is capable of both MO (subscriber to SMSC) and MT (SMSC to serving MSC)? Why would one use opcode 44 when the same thing can be accomplished with opcode 46? Thanks in advance.

2. Shri said on Oct 6, 2010: Log in to Reply MT-Forward SM (opcode 44) is used between the gateway MSC and the servicing MSC or the SGSN to forward mobile terminated short message. MO-Forward SM (opcode 46) is used between the serving MSC or the SGSN and the SMS Interworking MSC to forward mobile originated short messages. The Mandatory MAP Parameters (Invoke ID, SM RP DA, SM RP OA, SM RP UI) in both messages are same thats why in some cases (very rare) MO-Forward SM used in place of MT-Forward SM. But conditional MAP Parameters are different in both messages. More Message to send is available in MT_FSM as conditional parameter and used to indicate whether or not the service centre has more short messages to send. The information from the MMS indication received from the Service Centre is inserted in this parameter. Similarly IMSI is available in MO_FSM as conditional parameter and shall be included if the sending entity, whether MSC or SGSN, supports mobile number portability. It means apart from SMS if other services (MMS/MNP) are involved these messages (MO_FSM/MT_FSM) have different significance. I hope it clarifies your query. Thanks Shri

3. kishsreeram said on Nov 16, 2010: Log in to Reply

Thank you Appreciated:)

4. moein said on Nov 27, 2010: Log in to Reply What are the messages who have the application context=20 and are there any cases where the SRT-for-SM issued without indicating the Op Code

5. cesar said on Dec 3, 2010: Log in to Reply why in the first SMS the SMSC send to HLR SRI but the next SMS doesnt ask to HLR and the SMS send to directy to MSC/VLR.?

6. Shri said on Dec 8, 2010: Log in to Reply @moein Hi Moein, Send Routing Info For SM (Invoke) message has the application context = 20 (dialoguePDU: ShortMsgGateway) . In standard SRI for SM, there is always MAP Opcode = 45. Thanks Shri

7. Shri said on Dec 8, 2010: Log in to Reply @Cesar Hi Cesar, In first SMS, to get the MSC GT (where B number is roaming) and IMSI of B number, SMSC sends SRI_SM to HLR. In case of SMS is not delivered in first attempt due to absent subscriber, switched off or memory full, either SMSC will do retry to deliver SMS or on the basis of Alert_Service_Centre message received from HLR, SMSC reinitiate MT_FSM message, in both cases SMSC already have the serving MSC GT (where B number is roaming), so it does not send SRI_SM to HLR but directly sends MT_FSM to MSC/VLR.

Thanks Shri

8. Tariq said on Dec 14, 2010: Log in to Reply i have a question , if HLR does not have the last VLR location of the mobile and then someone send SMS to subscriber . if the VLR he is in send SM_Ready and message delivered will HLR register this VLR address based on the SM_Ready message ?

9. Badr said on Dec 24, 2010: Log in to Reply Great article! Thanks for sharing knowledg

10. Shri said on Dec 27, 2010: Log in to Reply @ Tarik, Hi Tarik, If HLR does not have the last VLR location, it means subscriber is not updated or not registered in HLR. In that case subscriber is not able to receive SMS as well as Voice call. When HLR receives SRI_SM from SMSC (gateway MSC) for the subscriber whose location is not updated in HLR, HLR simply responds to SMSC (SRI_SM_Resp) with subscriber not reachable status. After receiving, subscriber not reachable status from HLR, SMSC (gateway MSC) sends Report_SM_Delivery_Status to set the Message waiting Data into the HLR. Once subscriber get network coverage, LU process will take place and subscriber will updated into the HLR with current VLR. Now HLR sends Alert_SC message (Subscriber available) to SMSC (gateway MSC) as MSISDN is stored in Message waiting Data of HLR. After receiving Alert_SC message SMSC (gateway MSC) again initiate SRI_SM to deliver SMS to subscriber. Ready_SM (Ready for SM) message used between MSC to VLR and VLR to HLR or SGSN to HLR. MSC (VLR) sends this message to HLR if a subscriber indicates memory available situation, whose message waiting flag is active in the VLR, has radio contact in the MSC. So, in summary we can say a subscriber can not receive either SMS or Voice call if it is not updated into the HLR. In that case first Location update will take place before any other MAP message communication. Hope, this clarifies your query.

Thanks Shri

11. kvoulgar said on Jan 31, 2011: Log in to Reply Great article! I have a few questions with regards to the implementation and routing of SMSs. Lets assume that an SMS is sent from subscriber A (who is in network NW-A) to subscriber B (in network NW-B). 1. How can NW-A identify which network to forward the SMS to? 2. Am I correct to say that there are two ways of delivering the SMS, one where the SMSC/IWG of NW-A routes the call directly to the serving MSC of subscriber B and one where the NW-A SMSC forwards the SMS to the SMSC of NW-B, which subsequently delivers the SMS to its subscriber? What does the choice between the two methods depend on? 3. Is there any reason why NW-A needs to identify or know the MNC of NW-B? Thanks a lot in advance for enlightening my ignorance

Shri said on Feb 6, 2011: Log in to Reply @kvoulgar Hi Kvoulgar, Thanks for your comment and questions. Pls find the answers of your questions below: 1. How can NW-A identify which network to forward the SMS to? Ans : At NW-A, MSISDN ranges (GT Levels) of NW-B (where SMS to be forwarded) is already defined under AA19 agreement between both networks. When SMSC of NW-A receives MO_FSM for the subscriber of NW-B, SMSC-A analyze B-MSISDN and forwards SMS (SRI_SM and subsequently MT_FSM) to NW-B on the basis of routing table configured at NW-A for B-MSISDN. 2. Am I correct to say that there are two ways of delivering the SMS, one where the SMSC/IWG of NW-A routes the call directly to the serving MSC of subscriber B and one where the NW-A SMSC forwards the SMS to the SMSC of NW-B, which subsequently delivers the SMS to its subscriber? What does the choice between the two methods depend on? Ans : Yes you are right, it depends upon the implementation logic and methodology adopted by the network for terminating SMS. Normally GSM to GSM having bilateral agreement for SMS between two MNOs, SMSC/IWG of NW-A routes the SMS directly to the serving MSC of subscriber B. whereas for

SMS terminating from GSM network to CDMA network, SMSC/IWG of NW-A forwards the SMS to the SMSC of NW-B. Apart from these two scenarios, SMSHub scenario also is in practice where SMS Hub delivers SMS from one network to another for those MNOs who dont have bilateral agreement for SMS. 3. Is there any reason why NW-A needs to identify or know the MNC of NW-B? Ans : To identify the network to which subscriber B belongs, NW-A must know the MNC of NW-B. MNC is required for billing settlement and reporting purpose. Thanks Shri

12. chapi said on Feb 6, 2011: Log in to Reply Can you help me how to send SMS from a county no MNP to a county having MNP. For instance operator A has direct relation with operator B in county having MNP , when operator A request SRI_SM to operator B unfortunately the subscriber has changed to another operator C which is county A has not direct relation with but through third party . My question is how operator A receives return result for SRI_SM? Operator A has to invoke SRI_SM second times through third party(Hub)or operator B will forward the message (SRI_SM) to operator C then through Hub, Thanks in advance.

13. Shri said on Feb 19, 2011: Log in to Reply @Chapi Hi Chapi As Operator A has only bilateral relationship with Operator B, for all MSISDN series of Operator B, operator A directly sends the SRI_SM request to Operator B. Since Subscriber is ported into another Operator C and there is no bilateral relationship between A and C, if B routes SRI_SM to C with CGPA of A at SCCP layer, C can not able to response SRI_SM request as C can not recognize the calling party Address, so either it will kill the message or returns UDTS to B, so SMS delivery is not possible. Again, A can not invoke SRI_SM through SMS Hub as Subscriber number range belongs to B and for B, A is not using SMS Hub and there is no mechanism in place by which A get the idea about portability of subscriber in a country where A and B are providing service. To ensure successful SMS delivery in such type of situation, there should be some arrangement in MNP implemented country. One of the most popular arrangements is to receive international SMS only through SMS hubs having relationship with all the operators of MNP implemented country. It is not necessary SMS hub is single there might be more than one SMS hub but all the SMS hub must have relationship with all the operators of MNP implemented country, so that GTs of SMS hub allowed to all the operators and they can response SRI_SM request coming through these SMS hub.

Another mechanism is, all the operators perform sort of aggregation activity for incoming SRI_SM request. For example, SRI_SM request coming from A to B for a subscriber ported in to C, B routes SRI_SM request to C with CGPA of its own GT (replacing GT of A) , so that C can response SRI_SM to B and B again routes SRI_SM_Resp to A with its own GT ( replacing GT of C). Hope this help you understanding SMS delivery in a MNP implemented country. Thanks Shri

14. Shoaib said on Apr 10, 2011: Log in to Reply Hi Shri, Great article and very through answers, keep it up. Do you have sources you can share for detailed SS7 sms flow analysis, like MAP dialogues, sccp etc? Cheers.

15. Fivefingers said on Apr 14, 2011: Log in to Reply Shri.Great Replies..a through knowledge

16. Atul Yadav said on Apr 21, 2011: Log in to Reply Hi Shri, Can you share some docs on SMS flow and the troubleshooting methods.

Guna said on Sep 7, 2011: Log in to Reply hiii Shri, Dis is Guna from Hyderabad.Actually im searching for telecom protocol testing job,i have a real time exp in domain side.Workedwith Huawei telecommunicationsas a BSS engineer,right now i was resigned in this company.i have much interested to settled n telecom protocol testing side.please give ur valuable advices and tips for how to get a job in the same. Thanks.

17. Raj said on Apr 29, 2011: Log in to Reply Question: I have seen few messages without opcode, in which CGSCCP is GMSC GT & CDSCCP is B-party number, is it possible?

18. Sandeep said on May 9, 2011: Log in to Reply What are the parameters used in mo-ForwardSM Ack? It would be greate if I could get some pcap files. Thanks

19. osainet said on May 25, 2011: Log in to Reply nice one.

20. shashank said on Jun 13, 2011: Log in to Reply HI, I had a question for SMS flow in roaming cases. if the SUB A is from India and SUB B is also from India. Now the case is,SUB A is in UK (Roaming)and he is sending message to SUB B and B is in INDIA(Home network). so the flow of sms wil go from which SMSC?is it the SMSC in UK or the SMSC in INDIA? Could someone explain the detail flow or any site where i can find this flow? and also need to know what is the use of IW MSC in SMS flow? cant just SMSC direct ask HLR for the SUB B info and then submit the sms to MSC B ?

support said on Jun 13, 2011: Log in to Reply Always SMS will go from A-number Home SMSC, in your case SMSC in India. For your Question cant just SMSC direct ask HLR for the SUB B info and then

submit the sms to MSC B ?. SMSC is used for store & forward the SMSC, due to this it will always first submit it to Home SMSC and from Home SMSC it will ask B SUB HLR for info through SRI_SM message. If B SUB is not present at this moment then Home SMSC store the message and then it will deliver whenever B SUB is active. Storing the SMSC will required infrastructure, so its not possible to ask HLR directly and forward, Hope this clarify your doubt? Our volunteers are in the process of updating all the basic voice, Roaming and SMS scenario in our website. Please check our website regularly for the call flows. Note: you can also contribute to learntelecom.com and it will help millions of readers

21. Shri said on Jun 15, 2011: Log in to Reply @ Shoaib and @ Atul, Dear Shoab and Atul, We will publish shortly a series on GSM MAP message flow which include GSM call as well as non call flow messages in detail. Besides, you can refer 3GPP specifications, ETSI and GSMA documents on SMS for more information and knowledge. Thanks Shri

22. Shri said on Jun 15, 2011: Log in to Reply @ Raj Dear Raj, There are 3 MAP messages having B-MSISDN (B-Party Number) in CDSCCP, these are: 1. SRI_SM (Send Routing Info for Short Message, MAP Opcode 45) 2. RSDS (Report SM Delivery Status, MAP Opcode 47) 3. SIMS (Send IMSI, MAP Opcode 58) Above mentioned messages have specific Opcode. All other MAP messages contain Network Node Address at CDSCCP. So, as per GSMA recommendation there should be no MAP message with B-MSISDN at CDSCCP without Opcode. Normally abort MAP messages do not contain any Opcode but these are error message. If you can provide sample of SS7 message without Opcode, we will do further analysis. Thanks Shri

23. Shri said on Jun 15, 2011: Log in to Reply @ Sandeep Dear Sandeep, Parameters used in Mo-ForwardSM_Ack message: At SCCP Layer: CDPA = MSC Address CGPA = SMSC (or Interworking MSC) Address At MAP Layer: - Invoke ID (Mandatory Parameter) - SM RP UI (Conditional parameter) The short message transfer protocol data unit received from the Service Centre is inserted in this parameter - User Error (Conditional Parameter) Facility Not Supported, System Failure, SM Delivery Failure, Unexpected Data Value - Provider Error (Optional Parameter) This parameter is used to indicate a protocol related type of error: Thanks Shri

24. Pooya said on Jun 20, 2011: Log in to Reply Hi Ive a question. Is SMS stored in GSM? if yes, where is the sms stored? in SMSC? and what information, about a SMS, remains in the network ?

25. Mike said on Jun 22, 2011: Log in to Reply Hi! Ive a question. For whatever reason, MSC does not accept FSM ????

26. Mike said on Jun 22, 2011: Log in to Reply in SMSC? yes.

and what information, about a SMS, remains in the network ? no

27. Mike said on Jun 23, 2011: Log in to Reply which means: [A0] MAP dialogue PDU [A4] Map user abort info [80] User specific reason

28. hrl.bless said on Jun 23, 2011: Log in to Reply Can someone explain to me what happens when a subscriberA sends a message to subscriberB who is being served by a different network?Thanks

29. jHun said on Jul 13, 2011: Log in to Reply hi shri. This article is helpful , i just want to ask something, this is for our proposal i just want to know if it is possible to know if the text message was really received by the recipient or it was delayed, because we want to develop a software that that will give an acknowledgement that the SMS received by the recipient at the moment he/she received it. your help will really help us. thank you. or you can add me in facebook. afroditiejr[at]yahoo.com , thank you for your time.

30. Shri said on Jul 17, 2011: Log in to Reply @Pooya Hi Pooya, Yes, SMS stored in SMSC of home network in GSM. Once it is delivered to B MSISDN (recipient Subscriber), nothing is remains in network. Thanks Shri

31. Shri said on Jul 17, 2011: Log in to Reply @hlr.bless Hi hlr.bless, Following MAP messages flow in two networks, when a subscriber sends a message to another subscriber B, served by different network: 1. First message will be submitted to home SMSC of subscriber A (SMSC of Network A). MAP message from serving MSC to SMSC : MO Forward SM 2. SMSC of network A sends Send Routing Info for SM Request to HLR of network B. MAP message from SMSC A to HLR B : Send Routing Info For SM 3. HLR of Network B responds Send Routing Info for SM to SMSC of network A with Network node (serving MSC of subscriber B) and IMSI of subscriber B. 4. SMSC of network A forwards message to serving MSC (Network Node Address, received in Send Routing Info Response ) of subscriber B. MAP message from SMSC A to Serving MSC : MT Forward SM. 5. Serving MSC delivers message to Subscriber B and sends acknowledgement to SMSC of Network A (MT Forward SM Acknowledgement). Thanks Shri

hrl.bless said on Aug 10, 2011: Log in to Reply Thanks Shri, But i was thinking the SMSC of NetworkA will send the SRI-SM to the GMSC of NetworkA which intends forwards it to the GMSC of NetworkB. The GMSC of Network B now queries the ngHLR of the serving MSC of SubB. and returns the SRI-SM response in that same format. Now the SMSC of SubA now delivers the message to the SubB based on the GT of the serving MSC of SubB. How is this implementation to because i was thinking the SMSC of SubA does not necessary have to connect to the ngHLR of SubB.My worrry again is that if there are say 10 network operators then the SMSC of SubA have to connect to all the ten. Kindly educate me on my ignorance. Thanks.

Shri said on Aug 21, 2011: Log in to Reply

Your query has been answered here: http://learntelecom.com/groups/gsm-call-flows/forum/topic/what-happenswhen-a-subscribera-sends-a-message-to-subscriberb/#post-27

32. Shri said on Jul 17, 2011: Log in to Reply @jHun Hi jHun, Yes, it is possible. Serving MSC of subscriber B (B-Recipient Subscriber), sends acknowledgement to SMSC A (SMSC of originating network) in response of MT Forward SM sent by SMSC A to serving MSC. This acknowledgement is positive if delivery of SMS is successful otherwise serving MSC sends negative acknowledgement to SMAC A with proper error code. Thanks Shri

33. Shamal said on Jul 29, 2011: Log in to Reply Hi, Can you suggest me a good reading material regarding MAP, CAMEL etc. Really appreciate it. Specially to refer to the SMS related MAP parameter definitions etc. Thanks in advanced.

support said on Jul 29, 2011: Log in to Reply Please join the group Telecom documents to get more details. http://www.learntelecom.com/groups/telecom-documents/forum/topic/ss7-mapdocuments/

34. LearnSMS said on Aug 17, 2011: Log in to Reply Would it be possible to send SMS directly to an IMSI and not including MSISDN, I am referring to MT_FSM leg here. Thanks you so much for your expert guidance. -Sam

Shri said on Aug 21, 2011: Log in to Reply Your query has been answered here: http://learntelecom.com/groups/gsm-call-flows/forum/topic/sms-directly-to-the-bimsi/#post-29

35. hrl.bless said on Aug 23, 2011: Log in to Reply Hi All, NodeA has to submit a message through the SMSC to a subscriber but ONLY when the subscriber is reachable.currently the subscribers handset state is not reachable. NodeA has to send report-SMDeliveryStatus message to the ngHLR,but before nodeA can send this message, does it have to try submitting the message and get delivery failure response before? if true, is this a gsm standard that before a node can send reportSMDeliveryStatus message to the ngHLR, that node must try submitting a message and get delivery failure response? Thanks for educating me on my ignorance

36. Alim Ul Gias said on Aug 29, 2011: Log in to Reply Will the SMS follow the same path (shown in the figure) when an application is sending it to a single person and vice versa ???

Leave a comment
Click here to cancel comment. You must be logged in to post a comment.
Top of Form

Search
Bottom of Form

Login via
Log in with

Top of Form

User:

Pass:
Login

Register | Forgot?
/telephony/gsm/s
Bottom of Form

Login with Facebook

Region based Latest News


India Asia Europe USA Contest featured IP

Categories

Protocol

News Project

Application

Quiz Statistics Telephony


3G 5G GSM LTE m-commerce MNP SS7

Transmission

Video Tutorial White Papers Home Terms of Service Downloads Privacy Policy Members Groups Forums Blogs Activity Log in

Copyright 2011 Learn Telecom

You might also like