Professional Documents
Culture Documents
P vs yt and Mmax
P 2.5 7.5 12.5 17.5 20 22.5 25 yt 0.63 2.7 5.68 9.62 12 14.8 17.8 Mmax 20.92 73.42 140 217.5 260.83 306.67 355.83
VERTICAL ANALYSIS
L vs Qdw and Qup
L 5 11.11 17.22 23.33 29.44 35.56 41.67 47.78 53.89 60 Qdw 0.03 31.86 71.35 72.42 73.21 100 126.86 153.71 180.6 207.26 Qup 0.7 3.03 8.91 18.27 30.84 52.09 73.35 94.65 115.95 137.11
INSTRUCTIONS: 1. Run Lateral Analysis in Allpile , then click [To MS-Excel] button to begin the data transfer. 2. Check [Enable Macros] if you are asked while Excel is being opened. 3. After opening this Excel file, press [Update Lateral Data] button to upload the transferred data onto the spreadsheet. 4. Turn to [Lateral-y] sheet or [Lateral-M] sheet for graphical output.
INSTRUCTIONS: 1. Run Lateral Analysis in Allpile , then click [To MS-Excel] button to begin the data transfer. 2. Check [Enable Macros] if you are asked while Excel is being opened. 3. After opening this Excel file, press [Update Vertical Data] button to upload the transferred data onto the spreadsheet. 4. Turn to [Vertical-Qd], [Vertical-Qu], or [Vertical-2Q] sheet for graphical output.
Notes: 1. You can save the file under different file name. But do NOT delete this file: allpile.xls 2. You can customize the format of the graphs if you are familiar with Excel. Make sure each graph is linked to appropriate source on the [Data] sheet. 3. Do not change the contents on the [Data] sheet. 4 If you want to run a new analysis in Allpile again, you MUST close the Excel program first. Only one Excel program can be opened at any time. Units: 0 <-- If you want English units, input 0 in the left yellow cell. If you want Metric units, input 1 in the left yellow cell. If the value in the yellow cell above is 0, all data are in English units. If the value in the yellow cell above is 1, all data are in Metric (SI) units.
Do not delete data below: * Do NOT change the content in the yellow cells left* 0 If the value in the yellow cell above is 0, all data are in English units. If the value in the yellow cell above is 1, all data are in Metric (SI) units.
Printing Notes:
If you click on any cell outside the chart, you Please go to Print Preview before you print
25
20
15
10
Do not delete data below: Top Deflection, yt (in) Lateral Load, P (kip) * Do NOT change the content in the yellow cells above*
Printing Notes:
If you click on any cell outside the chart, you Please go to Print Preview before you print
25
20
15
10
Project Name
Graphical Result of AllPile Analysis
CivilTech Software
Sheet No.
Do not delete data below: Max Moment in Single Pile, Mmax (kip-ft) Lateral Load, P (kip)
Printing Notes:
If you click on any cell outside the chart, you Please go to Print Preview before you print
200
150
100
50
0 0 10 20 30 40 50 60 70
CivilTech Software
Sheet No.
Do not delete data below: Pile Length, L (ft) Compression Capacity, Qdown (kip) * Do NOT change the content in the yellow cells above*
Printing Notes:
If you click on any cell outside the chart, you Please go to Print Preview before you print
140
120
100
80
60
40
20
0 0 10 20 30 40 50 60 70
CivilTech Softwarwe
Sheet No.
Do not delete data below: Pile Length, L (ft) Uplift Capacity, Qup (kN)
Compression
Uplift
150 127
100
100
95 73
71 50 32
72
73 52 31
18 0 0 1 0 10 3 9 20 30 40 50 60 70
CivilTech Softwarwe
400 108th Ave NE, Bellevue, WA 98004