Professional Documents
Culture Documents
800 10510
17102200 1850 1990 MHz 1920 2170 MHz 4 x 17.6 dBi 4 x 17.7 dBi 2000 2200 MHz 4 x 17.8 dBi +45, 45; +45, 45 +45, 45; +45, 45 +45, 45; +45, 45 +45, 45; +45, 45
0 ... 5 ... 10 ... 15 T 0 ... 5 ... 10 ... 15 T 0 ... 5 ... 10 ... 15 T 0 ... 5 ... 10 ... 15 T Sidelobe suppression for first sidelobe above main beam 17 ... 20 ... 18 ... 17 dB 16 ... 20 ... 18 ... 18 dB 15 ... 19 ... 18 ... 17 dB 14 ... 18 ... 18 ... 16 dB within 020 sector above horizon 17 ... 18 ... 18 ... 16 dB 16 ... 17 ... 17 ... 16 dB 15 ... 17 ... 17 ... 16 dB 14 ... 16 ... 16 ... 15 dB Null-fill at 0 tilt Impedance VSWR Isolation, between ports Intermodulation IM3 Max. power per input 23 dB 22 dB 50 < 1.5 > 30 dB < 153 dBc (2 x 43 dBm carrier) 300 W (at 50 C ambient temperature) 21 dB 20 dB
10 3 0
10
3 0
1710 2200 45
1710 2200 45
Horizontal Pattern
dB
dB
7-16
7-16
7-16
7-16
Mechanical specifications Input Connector position Adjustment mechanism Weight Wind load Frontal: Lateral: Rearside:
dB
Subject to alteration.
4 x 7-16 female Bottom 2 x, Position bottom continuously adjustable 17 kg 600 N (at 150 km/h) 120 N (at 150 km/h) 650 N (at 150 km/h) 200 km/h 1686 x 337 x 112 mm 1389 / 323 / 71 mm
10
10
dB
3 0
3 0
Horizontal Pattern
936.3161/c
10
10
dB
3 0
3 0
800 10510
Page 1 of 4
KATHREIN-Werke KG . Anton-Kathrein-Strae 1 3 . P.O. Box 10 04 44 . 83004 Rosenheim . Germany . Phone +49 8031 184-0 . Fax +49 8031 184-494
For downtilt mounting use the clamps for an appropriate mast diameter together with the downtilt kit. Wall mounting: No additional mounting kit needed. Material: Reflector screen: Tin-plated copper. Radiator: Tin-plated zinc. Flat fiberglass radome: The max. radome depth is only 71 mm. Fiberglass material guarantees optimum performance with regards to stability, stiffness, UV resistance and painting. The colour of the radome is grey. All screws and nuts: Stainless steel. The metal parts of the antenna including the mounting kit and the inner conductors are DC grounded. 1389 1436 1494 1636 Adjustment mechanism with integrated scale 30
Grounding:
Environmental conditions: Kathrein cellular antennas are designed to operate under the environmental conditions as described in ETS 300 019-1-4 class 4.1 E. The antennas exceed this standard with regard to the following items: Low temperature: 55 C High temperature (dry): +60 C Ice protection: Due to the very sturdy antenna construction and the protection of the radiating system by the radome, the antenna remains operational even under icy conditions. Environmental tests: Kathrein antennas have passed environmental tests as recommended in ETS 300 019-2-4. The homogenous design of Kathreins antenna families use identical modules and materials. Extensive tests have been performed on typical samples and modules.
Page 2 of 4
800 10510
KATHREIN-Werke KG . Anton-Kathrein-Strae 1 3 . P.O. Box 10 04 44 . 83004 Rosenheim . Germany . Phone +49 8031 184-0 . Fax +49 8031 184-494
2 2
Adjustment wheel with twist-lock function. Downtilt spindle with integrated scale.
Thread for fixing the protective cap or the RCU (Remote Control Unit). Gearwheel for RCU power drive.
To set the downtilt angle exactly, you must look horizontally at the scale. The lower edge of the gearwheel must be used for alignment.
0 max.
max. 0
For a description of RCU installation please refer to the respective data sheet.
Internet: http://www.kathrein.de
800 10510
Page 3 of 4
KATHREIN-Werke KG . Anton-Kathrein-Strae 1 3 . P.O. Box 10 04 44 . 83004 Rosenheim . Germany . Phone +49 8031 184-0 . Fax +49 8031 184-494
General Instructions for Feederline Installation on Panels with four Connectors arranged on two Levels
Please note: In order not to damage the interfaces, please make sure that only the right tools are used. Tighten the feederline connector interfaces solely by using a common torque-wrench with a suitable wrench width.
There are four interfaces for feeding the antenna located at the bottom.
The connectors are mounted at two levels in order to facilitate feederline installation.
Start with the rearside located interface no. 1. Place the connector carefully and fix the nut using a torque-wrench (according to the manufacturers guidelines). The further sequence for the installation is: feederlines no. 2, 3, 4.
After feederline installation the optional remote control units (RCU) can be mounted if required.
For a full description of RCU installation please refer to the respective data sheet.
Please note: Additional weather sealing of correctly installed feederline connector interfaces is not required, nor is it recommended by the connector manufacturers.
Page 4 of 4 800 10510
Internet: http://www.kathrein.de
KATHREIN-Werke KG . Anton-Kathrein-Strae 1 3 . P.O. Box 10 04 44 . 83004 Rosenheim . Germany . Phone +49 8031 184-0 . Fax +49 8031 184-494
936.3161/c
Subject to alteration.