You are on page 1of 1

Amol Sinha

600mm coarse Feed Material Basalt

Feed Gradation Considered : (-) 10 mm : 8% (-) 20 mm : 13% (-) 50 mm : 23% (-) 100 mm : 35% SD 2.9 mm (-) 200 t/m3 : 53% Cr 26 % (-) 500 mm : 93% Abr 1132 g/t (-) 600 mm : 100%

Material Characteristics Considered : ROM : As-Blasted Basalt. Solid Density : 2.9 t/cum Crushability : 26% Contamination : Free from Clay, Moisture : 2%, max.

Portable Plant NW106+NW1100C

145

t/h

TK11-42-2V
145
Opening 90 mm

NW 106 Primary Stage

100 45 100

Any Variation in feed gradation and material characteristics then considered will effect Plant Performance in Capacity and Product Gradation

C106 std
Setting 80 mm

Slot Sizer TK deck


45 #20 mm/E81 % 30 15 130 15 100

NOTE! These capacities are maximum capacities in a continuous troublefree operation when feed material quality and distribution curve corresponds to the theoretical curve used in this calculation. Long term capacities will fluctuate due to the variations in the feed and operating intensity of the plant. Metso Minerals does not guarantee any of these figures without our separate written approval based on a detailed study of the case.

20 m3 BIN

130

Feeder VMO 17.5/8

Natural Fines

Metal Detector

214

GP11F coarse
Stroke 25 mm Setting 24 mm

Motor: 160 kW
214

CVB1845 IV
#55 mm & #65 mm required for producing GSB & Ballast
#44 mm/E90 % #23 mm/E94 % #12 mm/E94 % #5 mm/E87 %

NW 1100 Secondary Stage


214 32 52 53 39

38 52 52

38

39

53

0-5 mm/GSB

5-10 mm

10-20 mm

20-40 mm

No Guarantee on Product Shape


Capacity and Product Gradation as indicated depends on many parameters. However under normal operating parameters they may vary within an envelope of +/- 10% and it shall depend on the actual feed gradation and material characteristics fed to the plant

Final Product Capacity/Percentage shall depend on Feed Material Crushability/Solid density and Feed Gradation fed to the Plant at Site

Copyright Metso Minerals. All rights reserved.

You might also like