Professional Documents
Culture Documents
W3120-2/IL
W3121-3/IL
D Proportional, Proportional-plus-Reset, Differential Gap (On/Off) Control Mode or Transmitter Operation D Simple Dial Controls for Set Point, Proportional Band, Reset, Zero, and Span Adjustments D The Displacer Sensor Measures Changes in Liquid Level, Specific Gravity, or Interface Level, and the Controller or Transmitter Sends a Pneumatic Signal that is Proportional to the Changes D The 249 Series Displacer is Contained in a Rugged Cage for Mounting on the Side of a Tank, or the Displacer can be Suspended in a Tank without a Cage D Tank Flanged Connections to 8-Inch Size
D102776X412
Zero Adjustment (Transmitters only) Reset Adjustment (Proportional-Plus-Reset Controllers Only) Anti-Reset Differential Relief (Type 2502F and 2502FR Controllers Only) Output Signal--Direct (Increasing Level Increases O tp t) or Output) Reverse Action Proportional or reset controllers and transmitters Differential gap controllers with full adjustment Differential gap controllers with limited adjustment
Options O
Performance
Independent Linearity (Transmitters Only) Hysteresis Repeatability Deadband (Except Differential Gap Controllers) Typical Frequency Response 1 percent of output pressure change at span of 100 percent 0.6 percent of output pressure change at 100 percent of proportional band, differential gap, or span 0.2 percent of displacer length or displacement force change 0.05 percent of proportional band or span 4 Hz and 90-degree phase shift at 100 percent of proportional band, diferential gap, or span with output pipe to typical instrument bellows using 6.1 meters or 20 feet of 6.3 mm or 1/4-inch tubing
0.2 to 1.0 or 0 and 1.4 for on-off 0.4 to 2.0 or 0 and 2.4 for on-off
Temperatures
Temperature Temperat re Type or Material Standard 2500 Series Ambient High-temperature 2500 Series Cast iron sensor parts Steel sensor parts Stainless steel sensor parts Process N05500 torque tube Graphite/stainless steel gaskets Monel/PTFE gaskets Temperature Capability _C 40 to 71 18 to 104 29 to 232 29 to 427 198 to 427 198 to 371 198 to 427 73 to 204 _F 40 to 160 0 to 219 20 to 450 20 to 801 324 to 801 324 to 700 325 to 800 100 to 400 For process temperatures rocess tem eratures below 29_C or 20_F and 29 C 20 F for guidance on the need for a heat insulator contact insulator, your Fisher sales office office. If the ambient dew point is oint higher than the process tem erature, temperature, ice might form and cause instrument malfunction and reduce insulator effectiveness. Notes
Some combinations of process and ambient temperatures within the above require Combination of ambient and an optional heat insulator to protect the instrument from high or low temperatures. process For example, an ambient temperature of 86_F or 30_C and a process temperature of 200_C or 392_F require a heat insulator.
W0656-1/IL
W0660-1/IL
Typical Controller
Cageless Sensor
W2141-1/IL
Caged Sensor
TANK
LEFT
E0669 / IL
A6924/IL
S = Screwed F = Flanged SW = Socket Welding Style 2 Style 3 Top and lower side Upper side and lower side
F-1 means flanged connections at the top and bottom of the cage.
BULGARIA Process Control 17, Mila Rodina Str. BG- 1408 Sofia ) +359.2.958.21.85 3 +359.2.958.21.85 CIS Fisher-Rosemount Malaya Trubetskaya Street 8 - 11th floor CIS-119881 Moscow ) +7.095.232.69.68 3 +7.095.232.69.70 CROATIA Fisher-Rosemount Tratinska 19 10000 Zagreb ) +385.1.309.42.20 3 +385.1.309.44.69 CZECH Rep Fisher-Rosemount Volsinch 75 Cz- 100 97 Praha 10 ) +420.2.810.026 66 3 +420.2.810.026.70 DENMARK Fisher-Rosemount Hejrevang 11 DK-3450 Allerd ) +45.48.17.03.33 3 +45.48.17.02.44 : fisher.rosemount.dk FINLAND Oy Valmet-Rosemount Sinimaentie 10B FIN - 02630 Espoo ) +358.9.523.500 3 +358.9.523.997 FRANCE and FRENCH SPEAKING AFRICA Fisher-Rosemount 2, Place Gustave Eiffel Silic 247 F- 94568 Rungis ) +33.01.49.79.73.00 3 +33.01.49.79.73.99
Fisher, Fisher-Rosemount, and Level-Trol are marks owned by Fisher Controls International, Inc. or Fisher-Rosemount Systems, Inc. All other marks are the property of their respective owners. E Fisher Controls International, Inc. 1997, 2001; All Rights Reserved
The contents of this publication are presented for informational purposes only, and while every effort has been made to ensure their accuracy, they are not to be construed as warranties or guarantees, express or implied, regarding the products or services described herein or their use or applicability. We reserve the right to modify or improve the designs or specifications of such products at any time without notice.
Fisher Marshalltown, Iowa 50158 USA Cernay 68700 France Sao Paulo 05424 Brazil Singapore 128461
Printed in U.S.A. 6