Professional Documents
Culture Documents
00GS W R12 BM
TS AR P L
114
R R R R R R
GS GS GS GS GS GS
up to 2007 up to 2007 from 2008 from 2008 from 2008 from 2008
BMW R1200GS
Fairing
115
116
Windscreen Adjuster for BMW 1200GS
The search is over for a windscreen that works! Windscreens are like seats: a whole lot of different factors influence your personal requirements for the product. Your height, the type of helmet you wear, even your seating position they all determine whether a windscreen works or not. Discover for yourself what best suits your individual needs with our infinitely variable windscreen adjuster. For Hard Part (044-0414 and 044-0415).
044-5330
Hard Part SA Windscreen Support BMW R 1200 GS The windshield of the R1 200 GS shakes quite strongly, especially at low revolutions and on fast trips. Sometimes it shakes so strongly that real turbulence occurs and the in no way bad wind protection of the R 1200 GS decreases significantly. Even using the small hard part windshield aluminium parts (044-0380) is of relatively little use in this special case because the forces simply act further up. With this support the windshield is supported at more places and the problem is almost eliminated. It is very easy and quick to fit. 044-0414 044-0415 up to 2007 from 2008
044-0380
BMW R1200GS
Spoiler for Windscreen BMW R1200 GS
This spoiler unit is simply clamped to your windscreen. Wind protection can be improved considerably, and the noise level can be minimised when riding at relatively high speeds. If you should then decide to ride off road, the spoiler can be unmounted easily with the clamp mechanism and packed away. Thus, the disadvantage or risk of injury when riding off road is considerably lower than when riding with a higher windscreen. No tools are required for mounting; everything can be performed at the bat of an eye. The spoiler is only suitable for the original windscreen. We make explicity clear that the strengthing elements Hard Part for windscreen R1200GS Alu (product number 044-0380, p. 116) should be used. The increase in windscreen height is approx. 112 mm (Adventure: 80 mm).
Windscreens
117
044-0410 044-0750
041-0020 R 1200 GS Sports Windscreen with Spoiler For all those who like riding on the motorway and prefer the shorter windscreen. The small, discreet spoiler effectively reduces airflow when riding at high speeds. 041-0021
118
Cockpit Cover 2 (Tachometer Unit) with On-Board Socket, BMW R 1200 GS / Adventure
The cockpit cover 2 covers the R 1200 GSs tachometer unit. In addition, it features an integral, fused on-board socket. For example, mobile phones or GPS units can thus be plugged into the cockpit directly without having to run annoying cables around the motorbike. Because of the fused direct connection, these units can be charged even when ignition is off. Normally this causes problems with the R1200GS. This black cover is made from powder-coated aluminium and includes stainless steel mounts. It fits perfectly. The unit can be fitted alone or in conjunction with the cockpit cover 1 (item number 044-0550).
044-0560
up to 2007
044-0563
from 2008
Cockpit cover 2 *tachometer unit* with small and big socket BMW R 1200 GS / Adventure 044-0561 up to 2007 044-0562 from 2008
044-0550 044-0552
BMW R1200GS
Cockpit, Fairing
119
044-0322
044-5095 044-5090
Cover and headlight guard set R 1200 GS / Adventure 044-0328 (all years of construction)
120
044-0490
R 1200 GS TT-Line Handlebar Conversion Fixing kit for original hand protectors. With this conversion kit you will save about 900 grams in weight. The handlebars are fitted with special adapter sets so that the original hand protectors can be fitted. All functions and handle heating are possible as always. Very beautiful, elegant appearance and technically very high-quality handlebars. Never was it easier to save weight than with this handlebar conversion set. The pre-fitted TTLine handlebars are supplied with the adapters.
BMW R1200GS
121
044-0400 (yellow) 044-0402 (silver) 044-0403 (black) Kaoko Cruise Control, mechanical cruise control, BMW R1200 GS / ADV
The original by the South African inventor! The Kaoko Cruise Control replaces the original handlebar end weights. The anti-slip knurled screw secures the accelerator in position. This significantly reduces the strain on the right hand during long journeys. Thanks to the continuous adjustment, the accelerator can also be fixed to decelerate very gently - leaving you enough time to take your hand off the handlebar for a moment without immediately losing throttle. Despite that, the motorbike decelerates in a gentle and controlled way. This item is illegal in road traffic in Germany and could be dangerous if used incorrectly. We are unable to accept any responsibility for it. Used at the owners/riders own risk. 044-2301 up to 2007 044-2300 from 2008
122
Horn Button Protection BMW R 1200 GS/ ADV/R, HP2, F 650 (Twin)/800 GS
You know the problem: with a fully packed tank bag and the handlebar turned nearly all the way, the horn button is pressed accidentally. With our 1.5 mm thick, powder-coated stainless steel horn protection, the problem is gone for good. The horn protection is easily fitted with the existing instrument screw and is hardly noticeable. The functionality of the horn is not impaired in any way.
044-3034
610-0026
610-0025
044-0460
BMW R1200GS
Front Clutch Fluid Reservoir Guard BMW R 1200 GS/Adventure
Not so safety-related but just as at risk as the brake fluid reservoir is the clutch fluid reservoir. It is also often messed about with and this happens until the safety mechanism is broken. This guard prevents this simply. The guard is screwed on and off quickly and the cap can no longer be grabbed easily. The whole reservoir is also protected. Made of laser-cut, anodised aluminium.
Handlebar, mirror
123
044-0470
040-1701
up to 2007
When ordering, please substitute the X for the number in brackets. Hand Protectors R 1200 GS Spoiler for Hand Protectors (black impregnated plastic) Spoiler large for Hand Protectors (black impregnated plastic)
124
Adjustable Brake/Clutch Lever, short
The perfect lever length, an ergonomic shape and pleasantly rounded lines help you to apply just the right amount of braking or clutch force. The lever allows for selection from any of 6 positions to perfectly adjust it for any hand size. The adjustment lever has a protruding knob that fits particularly well in the hand, thus facilitating adjustment even while riding. The lever mechanism is carried on highly durable brass bushes. A generous recess at the end of the lever serves as a predetermined breaking point, and ensures that the lever can still be used even after a fall. The lever is a development by AC Schnitzer, where it is anodised in titanium for us.
610-0405 610-0406
End caps M8 gold End caps M8 red End caps M8 black End caps M8 titan
Side Rrame Quick Fasteners BMW R 1200 GS Stylish replacement for the standard fasteners. Phillips screws provide effective protection and prevent the side panels from being stolen or removed easily. However, ease of maintenance is retained. Enhances your motorbikes look! 044-0660 (4 pieces) up to 2007
044-0670 up to 2007
BMW R1200GS
125
steel handlebars (up to 2007) 1200 GS ADV aluminium handlebars (up to 2007) aluminium handlebars (from 2008 onwards) TT-Enduro handlebars
126
GPS Adapter BMW R 1200 GS Adventure
Durable adapter for T ouratech handlebar brackets. This adapter enables you to fit your GPS unit in such a way that you can see it clearly. It is fitted to the top windscreen support on the Adventure. Ideal for offroad use. Not for MVG-bracket! (Delivery schedule does not include the GPS bracket)
040-0663
040-0667
GPS Handlebar Bracket Adapter *handlebar clamp BMW R1200 GS/Adventure Fits to the handlebar clamping support
For original handlebar height, up to 2007 040-0664 With Touratech handlebar risers, up to 2007 040-0665 For original handlebar height, from 2008 onw. 044-1070 With Touratech handlebar risers, from 2008 onw. 044-1072
BMW R1200GS
LED Indicators ARROW BMW R1200 GS
The sporty replacement for the originals. The indicators blend elegantly with the shape of the Motorcycle. Delivery includes all parts needed for mounting and a resistor to ensure that normal indicator frequency is maintained. Carries the E test mark. Consisting of 1 kit (2 in front and 2 behind).
127
615-1000
044-0393
128
040- 2685
040-2692
Side Panel Set for BMW R 1200 GS and Adventure Special side panels that further accentuate the fine lines of the R1200GS. Allows access to the onboard power socket as well as the shock absorber is adjustment. Side panels reduce the amount of water thrown by the tire onto your legs. The side panels perfectly match the tank fairing parts and the aluminium tank cover. Also fits with the BMW and T ouratech pannier racks. For BMW R 1200 GS and Adventure up to 2007: 040-2692 white aluminium silk matt
040-2696
040-2687
040-2689
matt black titan metallic dark metallic matt namibia orange uni tansanit blue uni Magnesium metallic matt white grey
040-2690
BMW R1200GS
129
FOG
XENON
up to 2007: Xenon auxiliary headlight left Xenon auxiliary headlight left Additional fog headlight right Additional fog headlight right Additional fog headlight left Additional fog headlight left from 2008: Xenon auxiliary headlight left Xenon auxiliary headlight left Additional fog headlight right Additional fog headlight left R1200GS R1200GS Adventure R1200GS+Adventure R1200GS+Adventure 040-1519 040-1499 040-2015 040-3015 R1200GS R1200GS Adventure R1200GS R1200GS Adventure R1200GS R1200GS Adventure 040-1514 040-1516 040-2014 040-2016 040-3014 040-3016
All T ouratechs Xenon control units are protected from strong vibrations! Includes German TV T Approval and needs not be registered. ype
130
044-0950 LED Twin Rear Light BMW R 1200 GS/ADV from 2008 - 2010 An eye-catcher at the rear, made from black powder coated stainless steel and black anodised aluminium! The high quality LED rear lights provide twice as much safety and a completely new look to the rear. A mini LED number plate light and a new rear reflector round off the elegant piece. The cabling provided ensures that it can be connected quickly and without problems. Only fits models from 2008 - 2010! 044-3003
BMW R1200GS
Lighting, tank
131
132
Height driver seat extra low 48 cm driver seat low 50/52 cm driver seat standard 51/53 cm driver seat high 54/56 cm pillion passenger seat
Driver seat Driver seat Driver seat Driver seat Pillion seat
extra low (see above) low (adjustable) standard (adjustable) high (+ 2 mm, adjustable)
BMW R1200GS
Seat
133
Comfort Seat High End *Breathable* The ultimate seat combination for the R 1200 GS and it can also be used in modular form The newly developed HE seat sets the standards in seating comfort. With this comfortable and activelybreathing seat, you will experience pleasant and relaxing riding, even on long trips - and you can forget about high temperatures and humidity!
The seats are made from the highest-grade materials and especially customised to ergonomic requirements over long distances. Air circulation in the seat area remains at an absolute optimum thanks to the superlative, actively-breathing seat design - even on long and hot journeys. Sticky and crumpled underclothing is now effectively a thing of the past. Besides the use of actively-breathing materials which considerably improve seat comfort in the long-term, the HE also provides effective protection against uncomfortable pressure points on your upper thighs. During conception and design, great care was taken to achieve perfect cushioning - and to ensure that the seams cannot be felt. The high-strength cushioning protects your posterior - really effectively. The seat cannot be dented - even after long and hard use. Then there are its contours theyre designed to ensure sheer comfort for you, the user. The pillion seat is designed in such a way that it is almost impossible for your passenger to slide forward when you brake - and this really improves the degree of comfort for both you and your pillion passenger. With this seat combination, you can tackle the longest, most challenging and demanding journeys, whether youre riding alone on your machine or not. Y can also order pillion and riders seats ou individually - both seats can be fitted in combination with the series models and fitted with no problem at all. Design, material, cushioning and finishing have combined to create truly superlative products which will considerably increase the pleasure you take in riding your machine - wherever you are... in Africa, South America or on your own home ground. For all 1200 GS models! Height 055-1531 Riders seat standard 51/53 cm 055-1529 Riders seat high 54/56 cm 055-1530 Passenger
T ests in Namibia, Bolivia and Mexico have led to a great increase in comfort in hot weather.
The information on seat heights always relates to our definition on page 1216.
134
Tests in Namibia, Bolivia and Mexico have led to a great increase in comfort in hot weather.
Height 54 cm 57 cm
The information on seat heights always relates to our definition on page 1216.
Pic.: Michele MIGLIORE - AXEKK SICILIA
BMW R1200GS
Seats Seat
135
136
hlins Shock Absorbers
hlins shock absorbers are highly recommendable. They will considerably improve your bikes suspension characteristics (the front and rear installations must be properly matched with each other). All hlins shock absorbers function according to the de Carbon principle. The reason why hlins shock absorbers work so well is no secret! Its their precision! Note: Other, individual modifications to he hlins shock absorbers (on initial order) can be made for your personal needs and requirements upon request. Please inquire!
BMW R 1200 GS/Adventure Rear The spring preload is adjusted hydraulically via a hand wheel. The hose length adjusted for the R1200GS ensures that the handwheel can be fitted properly. T 46DRS ype R 1200 GS 040-0434 T 46PRCQS ype R 1200 GS Adventure 040-0437
BMW R 1200 GS/Adventure Front T 46ER: ype The gas volume is incorporated into the shock absorber body so that the shock absorber fits into the narrow slot in the steering head. R 1200 GS R 1200 GS Adventure 040-0433 040-0436
Lowering the chassis: Legs too short or even motor bike too big? Finally we can help you. The hlins chassis lowering system provides a simple solution that does not lower driving comfort at the same time. It can be lowered by about 22 mm by replacing both shock absorbers (front and rear). Therefore these shock absorbers are only available in pairs.
You will find low seats on pages 132-135!
040-0435
Rear Shock Absorber with Higher Spring Rate Our standard hlins shock absorbers for the R 1200 GS are suitable for an 80 kg rider with luggage or pillion passenger. Weve always got along very well with these. But there are also other circumstances and for these we now also have shock absorbers with other (harder) springs. Now we will also offer shock absorber with harder springs (type 160). These are designed for two people plus luggage.
044-1060
BMW R1200GS
Touratech Suspension R 1200 GS / Adventure:
137
Many Advantages to Other High-End Brands! Touratech Suspension has been designed by Tractive Suspension. Tractive has specific, profound expertise of the Touratech type of motorbike models. As an example, the people at Tractive designed most of the shocks used by BMW Motorrad since the last 10 years. They therefore understand the specific user and reliability requirements as no one else does. The shocks were developed for traction, comfort, dynamic safety, reliability and light weight. Every shock has been test driven with Touratech customers in mind. The shocks have been succesfully tested on durability 4 times stricter than the original BMW standards. Last but not least every shock design has been tested by theTouratech experts in Enduro use during the 2011 season.
Detailed information on Touratech Suspension and available variants can be found starting on page 1221!
BMW Typ: R1200 GS (REAR) R1200 GS (FRONT) R1200 GS (REAR) LOW approx. -50 mm R1200 GS (FRONT) LOW approx. -50 mm R1200GS Adv. REAR R1200GS Adv. FRONT R1200GS Adv. REAR; from 2010 R1200GS Adv. FRONT; from 2010
Extreme 044-5870
044-5872 044-5873
138
Hard-Part GS Fork Protectors BMW R 1200 GS / Adventure
These fork protectors give utmost protection to the stanchion of the telelever forks. Forget about damage caused by flying stones, dust or mud. Our new fork protectors are made of soft neoprene and mount without tools. They are wrapped around the sensitive parts of the fork, fastened with Velcro and fixed.
040-1304
BMW R1200GS
Silencer
139
AC Schnitzer STEALTH Stainless Steel *black* BMW R 1200 GS Sounds Hot. Looks Cool.
Features: - Carbon outlet top and bottom cover - Jacket in stainless steel *black* - Core in stainless steel - Asymmetric hexagonal jacket shape - Dual system with removable sound insert - Weight approx. 3,45 kg for the stainless steel model - Increases power and torque - Super sound - Includes connecting tube for original or Remus manifold - Street legal
044-5850 044-5851
040-3344 up to 2009 040-3346 from 2010 HEXACONE TITANIUM slip-on muffler with titanium core, 1,5 kg. Includes connecting tube for original or Remus manifold, all street legal. 040-3345 up to 2009 040-3347 from 2010
140
Cross Tube Manifold Cover BMW R 1200 GS/Adventure
Protects the cross tube from stones being thrown up and heavy soiling. Also the appearance of the bare pipe is enhanced. The manifold cover is made of anodised aluminium.
044-0250
Universal Tube Manifold Cover (Left and Right) BMW R 1200 GS/Adventure
Protects the bike from stones being thrown up and heavy soiling. Also the appearance of the bare pipe is enhanced. The manifold cover is made of high grade steel. Parts supplied: 2 pieces, incl. 4 pipe clips.
044-0132
Manifold Shield Cross-Pipe NEW STYLE made from stainless steel BMW R 1200 GS / Adventure
In addition to our popular aluminium manifold shields, we now stock an even sturdier version made from stainless steel. As well as offering improved protection, the new manifold shields have a fresh new look. Easy fitting and quick cleaning complete the shields features.
044-3050
BMW R1200GS
Manifold Shield NEW STYLE for BMW R 1200 GS / Adventure Made from Stainless Steel
Of course our two manifold shields prevent the soles of your boots from burning as reliably as their aluminium counterparts (044-0270 + 044-0260). These sturdy stainless steel protectors are quick to fit and easy to clean. Plus your exhaust manifold will also look a lot better with our shields fitted. - For all years of construction
Frame Protection
141
Heat Protection Shield for Connecting Pipe, BMW R 1200 GS/ADV from 2010
This attractive looking guard made of vibrofinished stainless steel is 40 grams lighter than the original part and is attached using the original screws. Maximum protection with minimum weight; what more could you want? Only fits models from 2010 onwards with exhaust flap and original silencer.
044-3018
Manifold Exhaust Flap Protection BMW R 1200 GS/ADV from 2010 onwards
This protection against stone chips is made from 2mm thick V2A, laser cut and CNC shaped. It is fastened to the original fitting points with the aluminium spacer bushings and stainless steel bolts supplied. It reliably protects your exhaust flap against stone chips and tree branches.
044-3012
142
BMW R1200GS
143
144
ESA Sensor Protection (Set) BMW R 1200 GS/ADV from 2008 onwards
Sturdy protector for the ESA sensor plugs, made of welded V2A. With this set, the sensitive plastic plugs are protected from possible damage. This effectively helps prevent a possible failure of the ESA system.
044-3020
Frame Plug for Paralever Screw Fixture BMW R1200 GS/ADV from 2008 onwards
This neat little part seals the tube on the frame for the paralever screw fixture and thus reliably protects against dirt. Only fits models from 2008 onwards!
044-3001
BMW R1200GS
Frame Protectors R 1200 GS/Adventure On the standard motorcycle the frame is not protected and your enduro boots will soon damage the paint of the frame. Our new frame protectors made from aluminium solve this problem. They will last forever, are very lightweight and also add a stylish look to your bike. all years of construction 044-0781 (silver) 044-0786 (black)
Frame Protection
145
Petrol Line Protection BMW R 1200 GS Braking down on a trip because of a small technical defect is really annoying - and it happened to us. On a steep incline a boot was pushed out just a little too far - and broke off the plastic connectors for the petrol lines. T o prevent this ever happening again to us (and of course to you!) we have created suitable, robust V2A protection for the 1200 off-road Boxer. For all years of construction. 044-0405
146
Brake-Light Switch Protection R 1200 GS
Robust protection made of V2A - reliable protection from damage brake-light switch. Manufactured from stainless steel, this sensible protector is fitted in no time at all and thanks to the boreholes, the cover is lighter than the original.
044-0480 044-0482
044-0455
BMW R1200GS
Lambda Sensor Protection (set) BMW R 1200 ADV, only ADV from 2006
These guards in a new look are manufactured from 1.5mm thick stainless steel and reliably protect the sensitive lambda sensors on both manifolds of the R1200ADV from stones and dirt. Fits only the R1200ADV with the original engine guard.
Frame Protection
147
044-3010
from 2006
044-2090 up to 2008
044-0305
up to 2005
044-0300
up to 2006
148
Fairing Crash Bar *Stainless Steel* for BMW R1200GS, from 2008 Your GS engine is already perfectly protected with our crash bar (051-0560)! But what would happen to the damageable and expensive plastic side sections of the tank fairing and the stainless steel shielding at the front if the worst came to the worst? The Touratech fairing crash bar prevents costly damage to the exposed parts of the fairing and eliminates the risk of those perpetually annoying scratches! - Made of electro-polished stainless steel for a really classy look that matches any motorbike paintwork - The outstanding quality of the alloy means no flaking of the coating and no corrosion in the event of minor damage to the crash bar - Well drawn-back tubular construction for extensive protection of the side sections - The elegantly curved design cleverly embodies the style of the R 1200 GS - Forces triggered by a crash or the motorbike falling over are absorbed and diverted to the specially intended points without causing any major damage - The generously dimensioned cross-sections protect the rider and motorbike even in a head-on collision - Stable, multi-position attachment with high-tensile clamping to the engine crash bar and bolting at the front - Lends the R 1200 GS an aura of ADVENTURE - Can also be mounted together with the Touratech LED, fog and xenon headlights as well as the Touratech daytime running lights - Can only be fitted in conjunction with our crash bar (051-0560) - For all BMW R1200GS models from 2008.
044-5161
610-0300 up to 2009
BMW R1200GS
Cylinder Protection
149
Cylinder Protection BMW R 1200 GS, Alu special (starting from 2010)
Combination of stainless steel and anodised aluminium to effectively protect the cylinder cover in the event of a crash or accident. Also effectively prevents the valve cover from moving in the event of a crash.
up to 2009 up to 2009
150
Engine Guard Kit BMW R 1200 GS
The engine guard extension and intermediate plate give optimum protection against stones protruding from the ground or bumps when riding off road. Both guard plates were deliberately manufactured with no holes to prevent the bike getting caught on stones or branches. The engine guard extension is fixed to the centre stand using 3 clamps with rubber inserts to prevent the plate from clattering. The engine guard intermediate plate is an effective extension to the existing engine guard and is fixed to the frame with two clamps.
BMW R1200GS
Engine/Radiator Guard
151
044-0722 from 2006 Engine Guard Extension R 1200 GS / ADV from 2006 onwards
The engine guard extension give optimum protection against stones protruding from the ground or bumps when riding off road. The guard plates were deliberately manufactured with no holes to prevent the bike getting caught on stones or branches. The engine guard extension is fixed to the centre stand using 3 clamps with rubber inserts to prevent the plate from clattering.
044-0720 from 2006 onwards Engine Guard Reinforcement R 1200 GS / ADV from 2008 onwards When used in extreme off-road conditions, the standard engine guard does not always guarantee complete protection of the engine. Our reinforcement effectively spreads the forces acting on it. It is a combination of flexible plastic and a sturdy, 3 mm thick stainless steel plate. 044-3040 from 2008 onwards
152
Throttle Potentiometer Cover BMW R 1200 GS and Adventure Y know the problem! Broken throttle ou potentiometer plugs because your boots get caught on them. This is now a thing of the past. With our beautiful, rugged cover your boots will no longer get stuck. Made of 3 mm anodised aluminium. The cover is fitted using two spacers and longer M4 x 40 head screws. 044-0730 alu 610-0011 black all years of construction all years of construction
Guard for throttle position sensor V2.0, natural aluminium Advantages of the V2.0: 3rd attachment point for maximum reliability optimised shape for even greater protection of sensitive clothing/boots additional rubber part for even greater protection of sensitive clothing/boots 044-0735 alu all years of construction 044-0736 black all years of construction V2.0 V2.0 Ceramic Clutch
The ceramic clutch has been developed in Africa for use on Africas extreme trails and for off-road trips. Since its introduction it has proved to be reliable. The ceramic clutch is much more durable and can be used under more extreme conditions than the original clutch. Even when climbing uphill with heavy luggage the clutch will work perfectly. Until now, not a single clutch has broken down! - 1.8 mm laser-cut stainless steel
- 8 ceramic friction plates (riveted) - Racing technology - Tried and tested in South Africa for many years and on tracks world-wide - Clutch does not longer overheat under extreme conditions. - Excellent workmanship and exacting tolerance / It normally does not break during the Life of a motorbike
Ceramic clutch 040-0353 also for BMW R 1200 GS/Adventure HP 2, R1200R, R1200RT, R1200ST, R1200S
Clutch Disc TOURING *Oil-Resistant* for BMW R1200GS/Adventure, HP2 and R1200R/RT/S/ST The worlds first oil-resistant dry clutch for BMW-motorcycles. A giant plus of safety for the world tourer, the trip through the alps and everybody else being often on the road - for now the tour can be carried forward unconcerned even with oil leaking on the clutch. Thanks to its wear-proof organic lining the patented clutch plate outstands with a soft response, excellent controllability and a considerable extended durability. NOT for HP2 Sport 044-5620
BMW R1200GS
153
051-0560
154
Locking Oil Filler Cap BMW R 1200 GS/Adventure
Stolen oil filler caps are a thing of the past. No special tool required: easy to operate using a small unobtrusive key. - High-quality workmanship - High-quality brand lock - Can be keyed to match our integral pannier locks
044-0210
044-0212
044-0214
BMW R1200GS
4 mm Plate for Kick Stand Support Extension
By using this plate you can control the kick stand angle. Three different screw kits are included so that 3 plates (total height 12 mm) can be fitted. Simply control the height by selecting the required number of plates.
155
044-0652
044-0652
BMW R 1200 GS up to 2005 Accessory for 044-0650, page 157. 044-0208 BMW R 1200 GS/Adventure from 2006 - 2007 Accessory for 044-0205, page 157. 044-3033 BMW R 1200 GS/Adventure from 2008 Accessory for 044-3030, page 157. 044-0208
041-0626
156
Shield Pillion Peg, Left Side BMW R 1200 GS/Adventure While using the center stand of your motorcycle the frame is not protected and your enduro boots will soon damage the paint of the frame. Our new protectors for pillion peg made from V2A stainless steel solve this problem. 044-0252 all years of construction
041-0621 041-0622
BMW R1200GS
157
044-3030
With this kick stand support extension the R 1200 GS stands much more firmly even on quite a soft surface. Even if you park the motorbike in a meadow you do not always have to look for a small plank of wood or another base. This practical part is made of a combination of stainless steel laser parts and anodised aluminium. Quick and easy to fit.
044-3030 from 2008 044-0205 2006-2007 044-0650 up to 2005 For accessories please have a look at page 155. Studded Pillion Passenger Footpegs
For anyone who drives with a pillion passenger through difficult terrain. With the studded rear footpegs the pillion passenger has a firm grip too and does not risk falling off the bike when the going gets difficult.The wider foot base also allows longer distances to be covered comfortably while standing on the footpegs. Material: high-quality stainless steel.
044-0860
044-5315
158
Adjustable Foot Rest R 1200 GS/Adventure
Specially developed for the R 1200 GS, low-set, height adjustable foot rest sets. By using the 3 screws on each side the height of the rest can be set to 4 different positions to suit almost your exact requirements. Thus you can make the sitting position on your R 1200 GS significantly more comfortable. T ogether with the adjustable R1200 GS gear lever (Item no. 044-0432) almost countless combinations can be set. The foot rests are made of stainless steel. 044-0570 all years of construction
300-0041
Gear Lever End Piece R 1200 GS/Adventure The R1200 GS Adventure gear lever can break even if you just fall or topple over. This will make it very difficult, if not impossible, to go any further. With our gear lever end piece you can reduce this risk effectively and simply. In addition, the forces acting on the gear lever will be transferred less strongly to the selector shaft. Simply replaces the original end piece. 044-0760 all years of construction
044-0432
BMW R1200GS
159
044-0430 044-0431
black silver
044-0430
160
BMW R1200GS
Mudguard
161
044-0590 Front Wheel Removal Tool BMW R 1200 GS / Adventure Is your front tyre flat? Do you have to repair the tyre or inner tube when travelling? With the R 1200 GS this can be a high-wire act. When on the central stand the motorbike tilts forwards and it is not always possible to find a suitable safe support. The removal tool provides a safe support for the R 1200 GS. At the same time it can folded so that is small and handy enough to be stored under the seat. It can also be used as a kickstand support or bottle opener. For all years of construction! 044-0475
162
Drive Shaft Crash Bungs A small item that can make a big difference! Our crash bung protects the drive shaft against expensive damage in the event of a fall. Thanks to its solid construction, the crash bung absorbs the forces and reliably protects the drive shaft tunnel against damage caused by contact with the roadsurface. 610-0007 all years of construction
044-0230
ABS Sensor Protection, Front BMW R 1200 GS/ADV from 2006 onwards
The shapely guard made of 1.5 mm thick stainless steel protects the front ABS sensor from coarse dirt and stones. Fits all models with ABS from 2006 onwards!
044-3000
044-0425
Luggage Rack instead of Pillion Seat XL Useful accessory for the solo motorcyclist. Fitted in place of the pillion seat. Luggage can now be positioned for ideal weight distribution. Thanks to the slits and the broad support area, luggage can be lashed simply and securely. The laser-cut aluminium plate is also an excellent optical replacement for the pillion seat. 044-5460 all years of construction
BMW R1200GS
163
Adventure
044-0420 R 1200 GS
044-0600
164
Splash Guard BMW R 1200 GS/Adventure
Much better effect than the standard splash guard and also suitable for off-road use Aerodynamic trick - proven 1,000 times!
Multitool R 1200 GS
The brilliant little helper to adjust the wind shield, to open or close the original oil caps and to open bottles. It saves removing the seat to get a tool for these routine tasks. The multitool is laser cut from stainless steel and can be easily attached to the key ring.
044
-08
75
Replacement for the prefilter from article number 044-0870, set of two. 044-0875
BMW R1200GS
RoadTech B1- Tool Kit for BMW Motorbikes Made by CruzTools
BMW motorcycles are legendary for innovation, and their choice of fasteners are no exception. Female T fasteners are commonplace, and some models orx even use rare male T bolt heads. Add special orx wrench and hex key needs, and it becomes clear that a unique tool kit is called for. Weve exceeded these needs with the new RoadT ech B1 for BMWs, which packs top grade tools and other roadside items into a sturdy roll-up pouch.
165
Contents: - Combination wrenches: 8 mm, 10 mm,12mm,13mm - Ohter wrenches: 20,32 cm (8) adjustable, E10 x E12 Box T orx - Pliers: 13,97cm (5.5) curved jaw locking - 0,64cm (1/4) drive socket set: 48-tooth mini ratchet, 5,08cm (2) Extension, 8 mm, 10 mm, 13 mm, E8 T - Hex orx keys: 3 mm, 4 m, 5 mm, 6 mm, 8 mm, special 22 mm axle adapter - T keys: T20, T25, T30, T40, T45, T50 - Screwdriver: 6-in-1 reversible orx (2 Phillips, 2 Slotted, 6 mm und 8 mm Nut drivers) - T gauge (kPa-scale! -> 100kPa=1bar) yre - Misc.: 3-LED 2AA flashlight, Locktite, oil - Pouch: roll-up, double-panel 600d Polyester with PVC backing (rolled up size: 24 x 12cm)
030-0090 GS-911 Bluetooth Enthusiast Version 030-0095 GS-911 Bluetooth Professional Version
166
Charger Compact Worldwide
Suitable for BMW CAN bus. Super-compact charger, extremely easy to use, also suitable for all CAN bus motorcycles such as the R 1200 GS, F 800 GS, etc.-Simply plug into the existing onboard power socket,and thats it! Charges the battery on CAN Bus motorcycles even when ignition is switched off.- Maintenance charging function and charge state LED - 5 m cable and Onboard power supply plug with 4 interchangeable plugs for EU, UK, USA and AUS IN: 100-240 V; 50-60 Hz; 550mA & OUT: 12 V; 1.66A - Also suitable for many other motorbikes with lead, lead gel and maintenance free batteries TIP: Can be used on your motorbike, too, with our onboard socket add-on kit with fuse!
130-0014 Accessory Socket If your motorcycle doesnt have an accessory socket or if you need an additional power supply. We use the accessory socket..... ...for connecting our CHALA12HD lamp ...to charge the camera barreries ...for our air compressor after repairing a flat tyre..... Fittings included / Mounts on the crossbar or handlebars (diameter of tubing 22mm). With fuse to connect directly to the battery for example 030-0027 SSR-01 Voltage Control Module The SSR-01 voltage control modules combines the features of the above TPS 15 with a delayed voltage drop function (1 minute). All power consuming devices are interrupted using a load rejection relay when starting the R1200GS. The on-board electrical system socket is also switched off when doing this. The reason for this is to deliver maximum battery power to the starter. However, GPS units, for .example, that consume little are also switched off and must be rebooted after each short motor break. The SSR modules delayed voltage drop function avoids this. Batteries continue to be charged and the GPS unit remains on when starting the motor. 044-0690 all years of construction Fuel Siphoning Adapter Line Practical siphoning line for the R1200GS. Thus you can, for example, fill your stove or help out another motor bike rider with fuel quickly and easily by simply turning the quick fasteners on the fuel line of your R1200GS. The connector on the adapter line may vary depending on the year of manufacture. Please check whether you need a male connector (070-0692) or a female connector (070-0690). 070-0690 (female connector) 070-0692 (male connector)
BMW R1200GS
Water protected
167
044-5804
168
Tank Bag Blue Edition BMW R 1200 GS / ADV *waterproof*
To match the new colour of the R 1200 GS for the year 2012, were offering a limited edition of just 100 of our popular tank bag in the colour combination blue/grey. Details: - Basic volume: 16 litres - All-round zip to increase volume: 22 litres - Colour: blue/grey - Length x width x height approx. 35x26x18/25 cm - Weight: approx. 1.3 kg - Made from Teflon-coated CORDURA which is both waterproof and dirt-resistant - Made in Germany by KAHEDO. As long as stock lasts!
Water protected
044-5805
You will find more information on our tank bags on page 1146 and the following.
Water protected
044-5803
BMW R1200GS
Tank Bag *High End* BMW R 1200 GS / Adventure The basic construction of the High End tank bag is the same as of tank bag R 1200 GS. But it also has the benefit of a number of additional features: A third outer pocket in the front, a document compartment with a separate credit card bag in the lid, and a waterproof zip. As with all Touratech tank bags, a map bag is also included in the delivery. Seen here: the large version with room for maps of up to DIN A4 size. Simply add our waterproof inner bags (055-1071), and you can use this tank bag in any weather.
Dimensions (l x w x h): approx. 35 x 26 x 18/25 cm Capacity: approx. 16/22 litres
Tank Bag
169
055-1136 black
Water protected
055-1123
170
BMW R1200GS
Saddlebag Set A4
Traditional saddlebags with an extra strong belt system to attach. Thanks to the size and shape, these bags are perfect for storing and transporting lots of things of up to A4 format. The bag has straps to secure the contents, and they can also be used to hold the bag open. An outer mesh pocket with zip completes the set. One saddlebag can easily be used as a rucksack with our optional tank bag carrying straps (055-1619). With universal attachment straps, they can be used on various types of motorcycle. Colour: black Volume: approx. 9 litres Dimensions (L x W x H): approx. 32 x 28 x 11 cm
171
Saddlebag set A4 with belt system Saddlebag single* Waterproof inner bag for A4 saddlebags with Velcro closure and with a roll-up closure
055-1120 Crash Bar Bags R 1200 GS Adventure A brilliant bag for overalls, spare gloves etc.... Really looks good on the R 1200 GS Adventure. The bags are just put over the tank bracket and fixed in place with 2 straps. Colors available: black, grey Dimensions (I x w x h): about 25 x 20 x 8 cm Capacity: about 2.5 litres per side 055-1135 (1 pair)
172
Waterproof Inner Bag
055-1072
055-1071
This practical inner bag is also the perfect addition to the saddlebags! The strong, waterproof material protects the contents against rain, dust and moisture. Combined with the special zip, this rainsack is practically waterproof. The large zip offers easy access to the contents. Puts an end to random searching through the depths of the bag! With a practical carrying handle for easy transportation. 055-1072 for saddlebags
Dimensions (L x W x H): approx. 32 x 24 x 11 cm Volume: approx. 9 L
Additional Bags for the Original Panniers For anybody who is looking for more space on top. The ideal addition to the original panniers. You can fit up to 17 litres of holiday luggage into the zippedsections on each side. The two bags can be ioined with buckles and carried as a rucksack or a shoulder bag. Strong handles make them easy to carry. Colours available: black/grey Dimensions (I x w x h): approx. 44 x 24 x 22/12 cm Capacity: about 17 litres per side 055-1370 (1 pair) Tail Rack Bag Zegatex for BMW R1200GSADV instead of pillion seat The tail rack pack Zegatex is easily fitted in place of the pillion seat. It uses the same mounts as the pillion seat and so it can be fitted securely in seconds. The innovative luggage system is consequently locked using the pillion seat lock. With this new system you can carry luggage without additional pannier frames etc. Colours: black, grey Dimensions: approx. 35 x 30 x 15/26 cm Volume: approx. 15/25 litres Made of Teflon-coated CORDURA, therefore waterrepellent. 044-5818 Tail Bag for the R 1200 GS Luggage Rack
We naturally now also have a practical tail bag with expansion for the luggage rack of the R 1200 GS. There is space for more than just the rain gear here. Colours: black, grey Dimensions: approx. 22 x 31 x 15/26 cm Volume: approx. 10/17 litres
055-1220
BMW R1200GS
055-1226
173
Water protected
044-5814
055-1226 for original luggage rack 044-5814 for Touratech topcase rack
055-1228 (2004-2007)
174
Tail Bag for the Pillion Seat
This tail bag can be secured either on the rear seat or the luggage rack, which is located under the rear seat. A zip expands the bag to up to 25 litres of volume. In addition, there is an elastic cord which can be used to store wet rain gear, a Velcro fastener on the plastic piece of the rear frame and an outside bag for the little things youd otherwise find yourself searching for. With the eyelets on the tail bag, its possible to easily tie down an object to the top of the bag. This tail bag can be converted to a backpack using the included straps. Colours: black/grey Dimensions: approx. 35 x 30 x15/26 cm Volume: approx. 15/25 litres
055-1224
Tail Bag XL for BMW R 1200 GS The big brother of our tail bag for the pillion seat. Here, not only the space for the pillion is used, but also the space on the luggage rack. The bag can be expanded to a volume of 30 litres. Thats plenty for a short trip! As with the tail bag for the pillion seat, the XL variant of our tail bag comes with an elastic cord on the bag and an outside bag for the little things youd otherwise find yourself searching for. With the eyelets on the tail bag, its possible to easily tie down an object to the top of the bag. This tail bag as well can be converted to a backpackusing the included straps.
Colour: black/grey Dimensions (l x w x h): approx. 50 x 25 x 15/26 cm Volume: approx. 19/30 litres
055-1222
BMW R1200GS
ADD BAG optional / optionnel / opcional
175
You will find more information on the Universal Travel Bag and the accessories on page 1152 and the following. 055-1461T
Universal toolcase /Zega Case New cube-shaped toolcase made of Cordura Teflon Mix. This robust toolcase has an incorporated belt for securing the tools. This clever feature is very useful on offroad trips - it effectively prevents the tools or other heavy objects from sliding around in the case. Besides tools and other objects, you can also pack your rain outfit and food for the trip into the case. The volume of this extremely robust toolcase can be doubled with a simple zipper and the case fits perfectly on the TOURATECH Zega Cases and the R1200 GS Adventure Case. The bag also fits on the luggage racks of many Enduro models (incl. the KTM LC8 Adventure and the BMW F650 GS). Two side pockets for various utensils/tools and a small luggage net make this case a multi-talented must-have. Dimensions (l x w x h): 35 x 18 x15/25 (expanded) cm. 050-0803 (black)
176
Delivery schedule: pannier racks with all attachments and mounting hardware
BMW R1200GS
177
38 l pannier system, frame black 38 l *And-S*, pannier system, frame stainless steel 38 l *And-black*, pannier system, frame stainless steel 45 l pannier system, frame black 45 l *And-S*, pannier system, frame stainless steel 45 l *And-black*, pannier system, frame stainless steel
38
100 cm
45
178
96,0 cm
Aluminium pannier system R1200GS VMT with black rack Aluminium pannier system R1200GS VMT with stainless steel rack Aluminium pannier system R1200GS with black rack Aluminium pannier system R1200GS with stainless steel rack
VMT: mounting kits already mounted on pannier! Delivery schedule of the system: 1 aluminium ZEGA pannier 35 litres, 1 aluminium ZEGA pannier 41 litres 2 mounting kits 18 mm, 1 pannier rack including mounting hardware
BMW R1200GS
102 cm
179
Alu
And-S
And-Black
ZEGA Pro 38/45 l, aluminium pannier system with black rack ZEGA Pro 38/45 l, aluminium pannier system with stainless steel rack ZEGA Pro *And-S* 38/45 l, aluminium pannier system with black rack ZEGA Pro *And-S* 38/45 l, aluminium pannier system with stainless steel rack
ZEGA Pro *And-Black* 38/45 l, aluminium pannier system with black rack 052-3010 ZEGA Pro *And-Black* 38/45 l, aluminium pannier system with stainless steel rack *And-S*: anodised aluminium case For further information on ZEGA Pro and accessories please have a look at pages 1066 et seqq.
180
88,0 cm
35
35 litres, pannier frame black 41 litres, pannier frame black 35 litres, pannier frame stainless steel 41 litres, pannier frame stainless steel
96,0 cm
41
BMW R1200GS
181
The special interior operation makes it possible to take the panniers off even if they are open. In this case, no key is required. It also acts as an emergency opening if the exterior mechanism has been damaged after a fall or accident. For really rough use on off-road tours, you also have the safety of the classic and well-proven locking mechanism, because this need not be taken off!
050-0900
You will need one Rapid-Trap-Adapter per pannier! Rapid Trap adapters are supplied without locks. As an option you can add our integral lock, 050-0871 on page 1080.
182
Locks for ZEGA Pro Panniers
Through the innovativ and robust catch our ZEGA Pro cases can be locked simply and without a lock. Additional padlocks protect against theft. Our integral locks are high-quality locks made by renowned manufacturers. Supplied as sets of two or four keyed alike locks so you need only one key per pannier system or pannier. You will need two padlocks per pannier.
055-0041 Padlock set for ZEGA Pro with 2 simultaneous locks 055-0040 Padlock set for ZEGA Pro with 4 simultaneous locks
These installation locks are only suitable for ZEGA Pro and can be installed without drilling/filing.
For ZEGA Pro accessories please have a look at page 1078 et seqq.
050-0872 Integral locks set for ZEGA Pro with 2 simultaneous locks 050-0874 Integral locks set for ZEGA Pro with 4 simultaneous locks
BMW R1200GS
ZEGA Pro Topcase Rack The special carrier for our ZEGA Pro Topcases.
Made entirely of stainless steel and specifically designed for the BMW R 1200 GS attachment points, the topcase rack is the perfect way to attach ZEGA Pro topcases to your bike. The topcase rack can be used on its own or in conjunction with our pannier system.
Topcases
183
ZEGA Pro Topcase 050-0650 25 litres 050-0670 25 l / with Rapid Trap 050-0660 38 litres 050-0680 38 l / with Rapid Trap ZEGA Pro *AND-S* Topcase 050-0652 25 litres 25 l / with Rapid Trap 050-0672 050-0662 38 litres 050-0682 38 l / with Rapid Trap ZEGA Pro *AND-black* Topcase 050-0653 25 litres 050-0673 25 l / with Rapid Trap 050-0663 38 litres 050-0683 38 l / with Rapid Trap
050-0653
The team of instructors, all tripseasoned specialists, will let you in on the secrets of having a successful motorcycle trip. Over 2 1/2 days, youll find out first hand all you need to know about taking a motorcycle trip, such as the following: BMW instructors experienced in long-distance motorcycle travel will show you how to really handle a motorcycle under off-road conditions - first with and then without baggage. For this purpose, rental motorcycles will be outfitted with aluminium pannier cases, tank packs, luggage rolls and an additional load weighing 30 kg. A GPS specialist from Touratech will show you the basics and special aspects (ins and outs) of GPS navigation and how to use it effectively during planning and while underway. An experienced longdistance motorcycle tourer will show you tips and tricks about shipping motorcycles, clearing customs, entering and departing a country, dealing with authorities encountered along the way and finding information before and during the trip. Youll also get some tips and advice specially focused on your own travel plans. BMW technical specialists will show you what you need to know about motorcycle systems and technology as well as performing small repairs along the way. After youve had this instruction, flat tires, leaking valve covers and even larger problems will no longer present insurmountable obstacles for you. Our equipment specialist will explain everything from personal riding gear to camping equipment. Youll also get many personalized tips fitting your own plans.
To top things off, this informative weekend will begin with an exciting trip report designed to build enthusiasm right at the start. Youll also get all meals and, if you like, a place to set up your tent in the park. The whole workshop team will provide a huge amount of personalized tips and advice. Youll be sure to catch the travel bug. Then all you have to do is schedule your vacation time, tell your family what youre up to, pack your bike and head on out!
The adventure starts right there at your front door! This travel workshop will take place on the following dates in the BMW Enduro Park Hechlingen: 11th- 13thMay2012 10th 21stAugust2012 For further information and to place a reservation, please go to www.enduropark-hechlingen.de. If youd prefer to participate in a pre-planned tour of some of the nicest enduro locations, then you can also join one of the guided tours led by the experienced team at the BMW Enduro Park Hechlingen.
le: availab urs are to owing cco The foll 1 nights: Moro Tuscany ro tour in and endu ,000 1 ort urs: a sp ary r in No deto duro tou t: Hung d eas sport en The wil utiful: a and bea Extreme nding n surrou Romania view of the regio abins nt dc s A differe ountain huts an ritime Alp : the Ma h: m ad trip Munic on/off-ro A classic island: Sardinia nduro: Tunisia e e Out to th l environs for an atura The n
All tours listed above are led by certified BMW instructors. For tour schedules and details, please go to www.enduropark-hechlingen.de Joe Stather