Professional Documents
Culture Documents
How to create the image: 1. Download PictBear (free software) from the Internet. (http://www.klitetools.com/) 2. Open PictBear.
Note: 800 x 480 is the optimal resolution. Other resolutions can be used, but might not fill the screen correctly.
3. Open the image you want the machine to display during boot up.
4. Open Palette Edit Screen: Image Image Type Index Color Custom
5. Select Open then Select Palette and browse to the Mosel_256_01.plt file.
Note: If you do not see the Mosel_256_01.plt, copy and paste it in the following location:
C:\Program Files\Fenrir Inc\PictBear Second Edition\palettes\palettes\Mosel_256_01.plt
7. Select File Save as, then select PNG file type and save the image.
8. Open the command prompt and change the directory, which includes the PNG2CPP.exe file. 9. Execute PNG2CPP.exe by typing PNG2CPP.exe xxx.png then pressing Enter. 10. PNG2CPP creates an image.bin file. (neither image.cpp nor image.h are needed)
11. Note the number in error message, 00002000 and another number in the message. In this case, its 000201DC
PNG2CPP.exe application converted image(PNG) file. and
In
12. Open the newly created .bin file with the hex editor tool and change the following:
< Before >
Note: Change only the highlighted bits 5, 6, 7 and 8 to: 00 02 5E 54 13. Save the image.bin as BootUpScreen.bin.
14. Save BootUpScreen.bin in the USB memory stick root for updating the logo data on the MFP. Note: Be sure to save the data in the root directory as the machine cannot detect data saved in other directories 15. Insert the USB memory stick into the USB port behind the control panel (NOT the service USB port), then access the Service mode. 16. Access System2 BootUp Screen.
19. After OK message is displayed, power OFF the machine. 20. Remove the USB memory stick then power ON the machine. 21. The new Boot up logo will be displayed when booting upinstead of the default Konica Minolta display.
To delete the logo from MFP: 1. Access Service mode Open System2 BootUp Screen select Del. and press Fix. 2. After OK message is displayed, power OFF the machine. 3. Original logo will be displayed at next boot up.