Professional Documents
Culture Documents
IN THIS ISSUE:
DEVELOPMENT TOOLS Lattice Silicon Motion DISK / INTERFACE Silicon Motion DISPLAYS Touch Revolution Sharp
LED LIGHTING OptoElectronix MICROCONTROLLERS Silicon Motion POWER MANAGEMENT Linear Technology Micrel
TIMING Micrel
LTC6101 4 to 105
5s/DIV
APPLICATION NOTES
Lattice / Micron Atmel / GE Energy / Micron / Sharp / Touch Revolution
Nu Horizons Electronics is a leading distributor of advanced technology semiconductor, display, illumination and power solutions to a wide variety of commercial original services equipment providers manufacturers (OEMs) and electronic manufacturing (EMS). With sales facilities in 45 locations across North America and Asia and regional logistics centers throughout the globe, Nu Horizons partners with a limited number of best-in-class suppliers to provide in-depth product development, custom logistics and life-cycle support to its customers.
Creating a Micron Technology RealSSD Memory Subsystem for Lattice ECP3 FPGAs in Embedded Applications Design Considerations for a Network Connected Sales Kiosk using GE Energy Power Supplies and Point of Load (POL) Converters Using Lattice Platform Manager and GE Energy POL DC-DC Converters to Create Power Subsystems for Embedded Applications Design Considerations when using GE Energy Power Supplies and Point of Load (POL) Converters in High Reliability Data Storage Applications
4 4 5 5
DEVELOPMENT TOOLS
Lattice Silicon Motion MachXO2 Pico Development Kit FerriSSD Single-Chip Solid-State Drive Dev Boards 6 6
FEATURED COMPONENTS
Disk / Interface LED Lighting Microcontrollers Power Management Power Management Power Management Power Supplies Programmable Logic Timing Silicon Motion FerriSSD Single Chip Solid-State Drive OptoElectronix Universal LED Light Engines Silicon Motion SM718 LynxSE+ and SM750 LynxExp 2D Graphics Co-processor Linear Technology LT3791 - 60V 4-Switch Synchronous Buck-Boost LED Driver Controller Linear Technology 18-Bit, 2.5Msps SAR ADC with PinConfigurable Analog Input Range and 99.8dB SNR Micrel Eliminating Dual-Stage Conversion For Point-OfLoad Applications N2Power XL375 CC - 260 Watts without Fans Lattice Semiconductor MachXO2 Family Micrel Programmable/Customizable 3-PLL Clock with up to 8 LVCMOS Outputs 7 10 11 13 14 15 16 17 18
ADVERTISEMENTS
Linear Technology Touch Revolution Current Sense System Your Innovation...Our Touch Remember Craftsmanship? We Do! Change Batteries in 2018 Innovative Lighting Solutions APAC Franchise by Location and Contact Information APAC Supplier Listing APAC Supplier Listing by Product Categories Displays / Embedded Solutions Supplier Listing Lighting Suppliers / Education and Development Solutions 2 8 9 12 19 20 21 22 23 24
Sharp Linear Technology Samsung LED / Nu Horizons Nu Horizons Nu Horizons Nu Horizons Nu Horizons Nu Horizons
Just use your smartphone to scan the barcodes throughout this publication and you'll link to more detailed information.
Note: You will need a QR Code Reader downloaded to your phone (i-nigma is free).
All registered trademarks displayed in this publication constitute the intellectual property of their respective holders. The technical information within this publication has been provided by Nu Horizons' suppliers. Nu Horizons does not assume any liability for its accuracy. Prices are subject to change without notice.
PO R TAL CONTENTS
AP P LI C ATI ON N OTES
Creating a Micron Technology RealSSD Memory Subsystem for Lattice ECP3 FPGAs in Embedded Applications
Low-cost, low-power, high-functionality FPGAs are finding their way into an ever broader set of applications. Demanding hand-held consumer and industrial electronic devices are the fastest growing applications segment today for this class of FPGA devices. The ability to combine all processing, interface and complex computation functions into a single device, without requiring high mask costs has been a boon to these fast moving audio/video oriented applications. Designs using both the RealSSD embedded USB mass storage drives from Micron Technology, and the Lattice ECP3 family of FPGAs can address even the most stringent low-cost, and high-reliability audio/video applications. In this application note we will explore and example application that uses a Micron RealSSD mass storage drive and a Lattice ECP3 FPGA to implement a ruggedized video/audio picture frame as a replacement for critical signage applications in industrial applications. This ruggedized version of the popular consumer graphic picture frame can also communicate important time dependant information in industrial factory applications (perhaps to warn or inform operators or technicians during critical steps) without the need for a computer interface. These information frames can be placed anywhere in the building where the sign content depends on the time or state of the equipment or process.
Scan barcode to access application note
Design Considerations for a Network Connected Sales Kiosk using GE Energy Power Supplies and Point of Load (POL) Converters
Using advanced communications and inventory management it has become popular to provide sales kiosks for a wide range of products. Movie ticket purchase at the multiplex, DVD rentals at the grocery store and snacks from ever popular vending machines at the gas station are just some of the more visible examples of this sales technique. The design of a network connected sales kiosk needs to address several key requirements including security, environmental monitoring, simplified user interfaces, low-cost and lowpower. Advanced features might even include video conferencing, voice recognition, speech processing and communication with smart phones. The power systems for a sales kiosk must be able to reliably and cost effectively generate the variety of voltages required by the system while insuring high availability and security. To better understand the design considerations for the power sub-system in a sales kiosk it is best to look at an example design. By observing some of the major requirements, constraints and trade-offs, during the architecture definition, and component selection we will be able to identify common design considerations that will apply during a wide range of similar system implementations. In this paper we will look in detail at the design requirements of a sales kiosk, like that used in an airport terminal to sell a variety of convenience items. A detailed list of requirements will be developed in the Application Description section so that trade-off options can be highlighted in the Component Selection section. Key components for the design will include the power sub-system, main processing board, touch LCD panel and communications system.
Nu Horizons offers a wide range of application notes and white papers. For more information, please visit ap.nuhorizons.com/application_notes
Using Lattice Platform Manager and GE Energy POL DC-DC Converters to Create Power Subsystems for Embedded Applications
Increasing reliability and availability requirements of modern embedded systems has put new demands on power subsystem designs. For example, the traditional requirement for hot swap capabilities have now grown to include advanced features like voltage scaling to save power and improve reliability, complex fault detection and logging features to simplify testing and field servicing. Advanced power system components, like the Lattice Platform Manager and GE POL (Point of Load) DC-DC converters can support the growing need for advanced features in modern power subsystem designs. This application note will use an example design of a power subsystem on a communications system monitor card to describe the key device selection and design considerations required for these types of designs. Key features will include voltage scaling to save power during light load conditions, increased supply accuracy to increase headroom needed during high dI/dt loads, and fault logging to improve reliability and prevent unanticipated down time. Key components for the design will include the Lattice Platform manager to sense and control the power subsystem, GE Energy POL DC-DC converters to source the power rails on the printed circuit board and Atmel Serial Flash memory to store power fault information during data logging.
AP P LI C ATI ON N OTES
Design Considerations when using GE Energy Power Supplies and Point of Load (POL) Converters in High Reliability Data Storage Applications
As users move more computing and data storage functions to remote network and cloud-based systems service providers must add large amounts of reliable data communications and storage hardware to satisfy growing demand. These high reliability requirements put additional demands on the power supply systems both at the chassis level and at the board level. Chassis supplies must have redundancy built-in so that a power fault can be isolated and power replaced by a redundant supply. Additionally, power systems should be monitored and tested automatically so that any early warning signs of potential problems can be used to avoid power outages. The design of a redundant supply system needs to address several key requirements and must address key cost and functionality trade-offs. Reliability must be increased without increasing cost too much. Some system requirements, like the ability to remove or add boards without powering down the system (which improves up time), must also be supported without increasing system complexity. In this paper we will look in detail at the design requirements of a data storage system, like that used to support cloud-based operations. A detailed list of requirements will be developed in the Application Description section so that trade-off options can be highlighted in the Component Selection section. Key components for the design will include the main power sub-system, chassis controller, and storage controller cards. The on-board power requirements (Power management and PoL converters) for the chassis controller and storage controller cards will also be covered where it helps to explain some of the main power supply design considerations.
Scan barcode to access application note
Nu Horizons offers a wide range of application notes and white papers. For more information, please visit ap.nuhorizons.com/application_notes
Order Number
LCMXO2-1200ZE-P1-EVN
Price
$29 - Special while supplies last
Description
Demo Kit Ferri SATA 2GB SLC Demo Kit Ferri SATA 4GB SLC Demo Kit Ferri SATA 8GB SLC Demo Kit Ferri SATA 16GB SLC Demo Kit Ferri SATA 32GB SLC Demo Kit Ferri SATA 2GB SLC Demo Kit Ferri SATA 4GB SLC Demo Kit Ferri SATA 8GB SLC Demo Kit Ferri SATA 16GB SLC
Nu Horizons offers a wide range of development / evaluation boards, tools and kits. For more information, please visit www.nuhorizons.com/development
D I S K / I N TER FAC E
FEATURES:
Easy-to-Use
Plug & Play device only requires format/fdisk prior to use The
APPLICATIONS:
Handheld / Portable Devices Blu-Ray Player / Recorder / Imaging Applications Automotive Infotainment System / GPS Network / Telecommunication / Thin Client Applications IPC / POS / MFP / HMI Test Instrument Military All Other Embedded Storage Applications
20mm
16mm
For more information, including pricing, availability, datasheets and samples (if available), please visit http://ap.nuhorizons.com/portal
RemembeR
We do.
cRaftsmanship?
Dazzling display visuals are just the beginning. Whats on the inside is just as important. Our LCD materials are of the highest quality, including glass from Sharps own Fabs. Our displays are built with durable construction to perform in environments from factories to physicians offices. Plus, our engineers live and breathe the development of Industrial Strength technology, just like yours do. So, you can rest assured that every Sharp LCD is built with pride. We wont settle for less...and our customers cant settle for less. www.SharpSMA.com
In 2012, Sharp celebrates a century of doing business. Heres to the next 100 years.
FEATURES:
Plug and play. Complete light engine with integrated optics, electronics, LEDs, and heat . Wide range of options: light outputs and color temperatures, beam angles, diffusors, form factors, power requirements, and finishes. High (commercial grade) quality. OPTO controls parts sourcing, manufacturing, QA, and testing. US company with offshore manufacturing subsidiary. Thermal foldback on most products. NSF certification for key products. Safety Agency Certification (UL or others). In-house design center allows for custom product development. Customer portfolio with Fortune 100 companies Management team has over 100 years of combined LED experience.
Lumens
ULE21VW ULE4000 ULE5000 ULE7000 ULE7000HS ULF8000
1 2
BENEFITS:
Easy to design into current and new products. Customer gets what they want with minimal customization. High reliability, 5 year warranty, 50,000 hour life. Competitive prices. High value products. Preserves LEDs in extreme conditions. Allows products to be used in food industry. A key requirement for many customers. Customers can get exactly what they want and gain a proprietary competitive. Established LED light engine supplier. Have the contacts and knowledge to provide the latest and best technology.
ULE4000 Certifications
UL, NSF, IP66 UL, ADA UL UL, NSF, IP67 UL, NSF, IP67 NSF & UL Q3
ULE7000
Input Voltage
12V AC/ DC 120V AC 120V AC 12V AC/ DC 12V AC/ DC 12 V AC/ DC or 90 to 277 V AC
Power (Watts)
2.2, 4.3, 6.5 18 32 6.5 6.5 8-42
Beam Angles
120 110 110 10 to 50 10 to 50 110
Life Expectancy1, 2
50,000 hours 50,000 hours 50,000 hours 50,000 hours 50,000 hours 50,000 hours
120, 240, 360, 450, 500 1220 1400 360, 450, 500 360, 450, 500 500- 2400
Variable heat sink for press fit mounting, submersible Integral heat sink, MR 16 replacement in recessed lighting w bi-pin conector Variable length and output, 12 in to 60 in
Life expectancy based on industry standard L70 point (70% of the original light output) Warranty = 5 years
APPLICATIONS:
Landscape light fixtures Commercial refrigeration
Scan barcode for more LED Light Engine information
In-grade pedestrian street crossings Snow blowers Wine coolers Solar carports
Parking lots Architectural lighting Elevators Wall sconces and ceiling lights
10
For more information, including pricing, availability, datasheets and samples (if available), please visit http://ap.nuhorizons.com/portal
MI C R OC ON TR OLLER S
FEATURES:
SM718 32-bit / 16-bit local bus / PCI bus 2D GPU for embedded or x86 CPU Internal 16MB SDRAM or external 64-bit high bandwidth DDRI memory configuration Up to 1920x1440 resolution 2 internal 300Mhz DAC 2 18-bit TFT interfaces 7 display layers for different application purpose Complete software set for different favor of Linux, WinCE, Windows, etc. SM750 PCIe x1 bus 2D GPU for embedded or x86 CPU Internal 16MB DDRI or external 64-bit high bandwidth DDRI memory configuration Up to 1920x1440 resolution 2 internal 300Mhz DAC 2 18-bit TFT interfaces 7 display layers for different application purpose Complete software set for different favor of Linux, WinCE, Windows, etc.
BENEFITS:
Lowest cost 2D GPU solution Lowest power GPU in the market, no heat sink or fan required Rich feature for simple or complex embedded/industrial applications Complete and easy to use SDK for customize driver development Committed to product longevity Availability of industrial temperature support
APPLICATIONS:
High resolution handhelds Point-of-Sales terminals Medical device Multi-functional printer Casino gaming IPC Server Thin Client
PCI
Internal Internal
For more information, including pricing, availability, datasheets and samples (if available), please visit http://ap.nuhorizons.com/portal
11
1.8V 1.2M
RUN
9V
LTC3104
FB
600k
RUNLDO
VLDO
1.2V 600k
FBLDO GND
600k
Features
VIN Range: 2.5V to 15V VOUT Range: 0.6V to 13.8V 300mA Buck IQ = 1.8A
Efficiency (%) 100
1.2MHz Constant Frequency, Current Mode Architecture 10mA LDO IQ = 1.0A LDO Dropout = 150mV 3mm x 4mm DFN14, MSE16 Packages LTC3103 for 300mA Buck Only in 3mm x 3mm DFN, MSE10
, LT, LTC, LTM, Linear Technology, the Linear logo and Burst Mode are registered trademarks of Linear Technology Corporation. All other trademarks are the property of their respective owners.
FEATURES:
4-Switch Single Inductor Architecture Allows VIN Above, Below or Equal to VOUT Wide VIN Range: 4.7V to 60V Wide VOUT Range: 0V to 60V (55V LED) 2% Output Voltage Accuracy Synchronous Switching: Up to 98.5% Efficiency 6% LED Current Accuracy: 0V VOUT < 60V VOUT Disconnected from VIN During Shutdown Accurate Rail-to-Rail LED Current Sense with Monitor Output Input Current Sense with Monitor Output PWM and Analog Dimming Capable of 100W or greater per IC 38-Lead TSSOP with Exposed Pad
499k VIN 15V TO 58V 0.003
VIN 1F 50 470nF IVINP EN/UVLO OVLO 200k SHORTLED OPENLED PWM IVINMON ISMON CLKOUT VREF CTRL 0.1F SS SYNC VC 2.2k RT LT3791
INTVCC BST2
IVINN
4.7F 50V 5
100
EFFICIENCY (%)
15.8k
INTVCC 200k
34.2k
98
96
28k
0.004 SNSN PGND BG2 SW2 TG2 FB ISP ISN PWMOUT SGND 86.6k 300kHz
0.033
94
92
90
APPLICATIONS: V
15V TO 58V
IN
10nF
10nF
INTVCC BST2 BST1 TG1 SWI BG1 SNSP 0.004 Comments SNSN PGND SW2
4.7F 50V 5
Efficiency vs VIN
100 98 EFFICIENCY (%) BOOST BUCK-BOOST
15.8k
INTVCC 200k
34.2k
BUCK
96
Topology SHORTLED
OPENLED
0.033
94 92
LED BG2 Current up to 20A LED TG2 Current up to 40A with FB Fast LED Current Transitions
ISP
90
10
20
50
60
VOUTISN to 75V up
PWMOUT SGND 86.6k OUT 300kHz
Multitopology
10nF
up to 100V
For more information, including pricing, availability, datasheets and samples (if available), please visit http://ap.nuhorizons.com/portal
13
18-Bit, 2.5Msps SAR ADC with Pin-Configurable Analog Input Range and 99.8dB SNR
All-in-One ADC with Configurable Input Ranges and Digital I/O
The LTC2389-18 is a low noise, high speed 18-bit successive approximation register (SAR) ADC. Operating from a single 5V supply, the LTC2389-18 supports pinconfigurable fully differential (4.096V), pseudodifferential unipolar (0V to 4.096V), and pseudo-differential bipolar (2.048V) analog input ranges, allowing it to interface with multiple signal chain formats without requiring additional level translation or signal conditioning. The LTC2389-18 achieves 3LSB INL (maximum), no missing codes at 18-bits, and 99.8dB (fully differential)/ 95.2dB (pseudo differential) SNR (typical).
Pseudo-Differential Unipolar 0V to 4.096V
5V IN +
IN
Pin-Configurable Input Range
LTC2389-18
Internal Reference
The LTC2389-18 includes a precision internal 4.096V reference, with a guaranteed 0.5% initial accuracy and a 20ppm/C (maximum) temperature coefficient, as well as an internal reference buffer. Fast 2.5Msps throughput with no cycle latency in the parallel interface modes makes the LTC2389-18 ideally suited for a wide variety of high speed applications. An internal oscillator sets the conversion time, easing external timing considerations. The LTC238918 dissipates only 162.5mW at 2.5Msps, while both nap and sleep power-down modes are provided to further reduce power consumption during inactive periods.
FEATURES:
2.5Msps Throughput Rate 3LSB INL (Max) Guaranteed 18-Bit, No Missing Codes Pin-Configurable Analog Input Range:
4.096V Fully Differential to 4.096V Pseudo-Differential Unipolar 0V 2.048V Pseudo-Differential Bipolar
APPLICATIONS:
Medical Imaging High Speed, Wide Dynamic Range Data Acquisition Industrial Process Control Instrumentation ATE
99.8dB (Fully Differential)/95.2dB (Pseudo Differential) SNR (Typ) at fIN = 2kHz 116dB (Fully Differential)/112dB (Pseudo Differential) THD (Typ) at fIN = 2kHz Guaranteed Operation to 125C Single 5V Supply Internal 20ppm/C (Max) Reference Internal Reference Buffer 162.5mW Power Dissipation at 2.5Msps No Pipeline Delay, No Cycle Latency 1.8V to 5V I/O Voltages Parallel and Serial I/O Interface 48-pin 7mm 7mm LQFP and QFN Packages
250
500
750
1000
1250
Frequency (kHz)
14
For more information, including pricing, availability, datasheets and samples (if available), please visit http://ap.nuhorizons.com/portal
FEATURES:
Hyper Speed Control architecture enables:
Delta V operation (VIN = 75V and VOUT = 0.8V) High Small output capacitance
BENEFITS:
Worlds highest input voltage high current synchronous buck regulator High efficiency Low EMI Fast transient response Wide conversion ratios (76V to 0.8V) Any Capacitor Stable
4.5V to 75V voltage input 4A output current capability, up to 95% efficiency Adjustable output down to 0.8V 1% FB accuracy Any Capacitor Stable
Zero-ESR to high-ESR output capacitors
100kHz to 500kHz switching frequency Internal compensation Foldback current-limit and "hiccup" mode short-circuit protection Thermal shutdown Supports safe startup into a pre-biased load 40C to +125C junction temperature range 28-pin 5mm x 6mm MLF package
For a SuperSwitcher II Family of Products tutorial go to http://www.youtube.com/watch?v=s8QC4EYjLqs or scan the black QR code with your smart phone.
APPLICATIONS:
Automotive Base stations Home security systems Industrial supplies Power-over-Ethernet Solar inverters
Hyper Speed Control, SuperSwitcher II and Any Capacitor are trademarks of Micrel, Inc. MLF is a registered trademark of Amkor Technology, Inc.
For more information, including pricing, availability, datasheets and samples (if available), please visit http://ap.nuhorizons.com/portal
15
FEATURES:
Up to 93% efficiency High power density All outputs may be paralleled Remote On / Off 5V Standby (1A) 12V Aux output Universal AC input Active current sharing for N, N+1 (main output) OR-ing mosfet board option Active inrush current protection Active PFC (90 - 264 VAC)
APPLICATIONS:
Servers Controllers Switches Test equipment Industrial automation Gaming systems Security and surveillance systems
J204
BENEFITS:
No fans means higher reliability Eliminating fans reduces noise Small size ideally suited for 1U chassis designs
3.33 2.55 (84.6) (64.8)
XL375 AC - DC
Height = 1.50 (38.1)
J1
1.50 (38.1)
.75 (19.1)
16
For more information, including pricing, availability, datasheets and samples (if available), please visit http://ap.nuhorizons.com/portal
MachXO2 Family
Low Cost, Low Power PLD
The MachXO2 family of programmable logic devices is optimized for low density applications, with an unprecedented mix of low cost, low power and high system integration. Now, with 10 new reference and demo designs, you can complete your design faster than ever. Microprocessors often have a limited number of general purpose I/O (GPIO) ports that reduce pin count and shrink package size, but limit the number of I/Os to which a microprocessor can be connected. To allow more I/Os to be connected to microprocessors, I/O expanders or port expanders are used to provide I/O expansion capability. Most generic GPIO expanders use low pin count protocols, such as I2C or SPI, as the interface to the master. They allow designers to save the GPIO ports on the microprocessor for other critical tasks.
PROGRAMMABLE LOGIC
I2C SLAVE PERIPHERAL USING EMBEDDED FUNCTION BLOCK (LATTICE REFERENCE DESIGN RD1124):
Provides a programmable solution for serial expansion of GPIOs Uses an Inter IC Communication (I2C) interface between the microprocessor and the GPIOs Provides additional control and monitoring capabilities for a microprocessor when it does not have sufficient GPIOs to do the job Provides an I2C memory interface to the microprocessor
SPI SLAVE PERIPHERAL USING EMBEDDED FUNCTION BLOCK (LATTICE REFERENCE DESIGN RD1125):
Provides a programmable solution for serial expansion of GPIOs Uses a Serial Peripheral Interface (SPI) bus between the microprocessor and the GPIOs Provides additional control and monitoring capabilities for the microprocessor when it does not have sufficient GPIOs to do the job. Provides a SPI memory interface to the microprocessor Take the next step and ask about scheduling a free seminar to learn about the new reference and demo designs for the Embedded Function Block, including hardened I2C and SPI interfaces and user Flash memory built into MachXO2 devices. The seminar will include hands-on technical training and live hardware demonstrations on a variety of new MachXO2 enhancements, including: Use of hardened I2C and SPI Ports and User Flash Memory (UFM) Configuration of Mach XO2 through Sysconfig ports & WISHBONE Interface Demonstration of Mach XO2 power saving features visit www.nuhorizons.com/lattice-machxo2 for more details
RAM-TYPE INTERFACE FOR EMBEDDED USER FLASH MEMORY (LATTICE REFERENCE DESIGN RD1126):
Utilizes the User Flash Memory (UFM) block (available on MachXO2-640/U and higher density devices) UFM block connects to the device core through the Embedded Function Block (EFB) WISHBONE interface. If desired, users can also access the UFM block independently through the hardened JTAG, I2C and SPI interfaces of the device. Facilitates user access to the MachXO2 EFB UFM module without the knowledge of WISHBONE protocol.
Feature
Density LUTs EBR RAM (Kbits) EBR RAM Blocks (9 Kbits/Block) Distributed SRAM (Kbits) User Flash Memory (Kbits) PLLs
XO2-256
256 0 0 2 0 0
XO2-640
640 18 2 5 24 0
XO2-640U
640 64 7 5 64 1
XO2-1200
1280 64 7 10 64 1
XO2-1200U
1280 74 8 10 80 1
XO2-2000
2112 74 8 16 80 1
XO2-2000U
2112 92 10 16 96 2
XO2-4000
4320 92 10 34 96 2
XO2-7000
6864 240 26 54 256 2
For more information, including pricing, availability, datasheets and samples (if available), please visit http://ap.nuhorizons.com/portal
17
FEATURES:
3-PLLs, and up to 8 outputs Customizable Frequencies Short sample TAT Individual programmable O/P Strength Separate voltage level on each output One 32KHz and multiple MHz frequency outputs in a single clock IC Individual PDB pins to turn off each output and corresponding PLL
<5mA power consumption when all PLLs operating
Femtocell / Architecture-2
10 MHz 30 MHz PL613-01 3- PLL TCXO 19.2 MHz 25 MHz Generating 1 All Required 14.7456 MHz Frequencies 3 3.6864 MHz 20 MHz PHY PICO PICO ( UART ) PICO ( Ethernet ) 20 MHz
Wide power supply range (1.8~3.3V) Smallest footprint (3x3mm QFN) General purpose clock
BENEFITS:
Replaces many oscillators and crystals Saves Oscillator/Crystal Mfg. time Faster to Market, if frequencies change Matches Signal Strength with freq/loading, reduces system EMI Supports multiple input voltage levels without additional passive components Faster start up time with 32KHz signal than expensive 32KHz oscillators, while supporting other clocking requirements Lowest Power consumption, Extends battery life Supports multiple applications Saves space Fits any application
100MHz
CPU Core in Freescale P1020 and P2020 DDR3 controller in Freescale P1020 and P2020 T1/E1/J1 Framer LIU MAXIM DS26521
12.8MHz Ref. In
83MHz 2 2.048MHz
18
For more information, including pricing, availability, datasheets and samples (if available), please visit http://ap.nuhorizons.com/portal
LED Tube
Let Nu Horizons be your design and manufacturing solution partner for your lighting needs. Learn more at www.nuhorizons.com/ledlighting or scan the QR code below with your smart phone.
Design
Custom LED
Assembly
APAC
FRANCHISE BY TERRITORY
APAC HEADQUARTERS:
Nu Horizons Electronics Asia Pte Ltd. No. 50 Kallang Avenue #06-01 Singapore 339505 Phone: (65) 6844-1650 Fax: (65) 6841-0494 Email: asiasales@nuhorizons.com
Hong Kong
Taiwain
ASEAN
Korea
China
SUPPLIER NAMES
Allegro MicroSystems, Inc. Amulet Technologies Anadigm ANT / Dynastream California Eastern Laboratories (CEL) connectBlue Digi International Digital Core Design Emerson Network Power Exar Corporation Excelsys Technologies Finisar Corporation GE Energy (formerly Lineage Power) H&D Wireless AB IBM Semiconductor Solutions Integrated Silicon Solution, Inc. (ISSI) IXYS (Clare) IXYS (Zilog) Kyocera (formerly Optrex) Lattice Semiconductor Linear Technology Corporation Magnum Semiconductor Marvell Semiconductor Micrel Inc. Murata Power Solutions N2Power Nanya Technology Corporation Nordic Semiconductor ASA Nuvoton Technology Corporation Pericom Semiconductor Corporation Pletronics Inc. (PLE) Redpine Signals Samsung LED Co Ltd. Semicoa Semtech (formerly Gennum) Silicon Motion Technology Corporation SMSC Supertex, Inc. SynQor Telefunken Semiconductors GmbH Vitesse Wrth Midcom
India
GREATER CHINA:
Beijing Tel: (86) 10-82250019 Tel: (86) 10-82252349 Tel: (86) 10-82250979 Fax: (86) 10-82253233 Chengdu Tel: (86) 28 6622-5166 Fax: (86) 28 8628-2522 Guangzhou Tel: (86) 20 8232-7764 Fax: (86) 755 8219-0980 Hangzhou Tel: (86) 21 6441-1811 Fax: (86) 21 6432-5790 Hong Kong Tel: (852) 3511-9911 Fax: (852) 3511-9990 Nanjing Tel: (86) 21 6441-1811 Fax: (86) 21 6432-5790
Shanghai Tel: (86) 21 6441-1811 Fax: (86) 21 6432-5790 Shenzhen Tel: (86) 755 3398-2850 Fax: (86) 755 8219-0980 Taiwan Tel: (886) 02 8797-3718 Fax: (886) 02 8797-3719 Wuhan Tel: (86) 27 8779 6670/71 Fax: (86) 27 8769-0820
INDIA:
Bangalore Tel: (91) 80 40878999 Fax: (91) 80 4122-2803 Chennai Tel: (91) 44 4351-2474 New Delhi Tel: (91) 11 4167-4374/75 Fax: (91) 11 4167-4376 Pune Tel: (91) 20 2422-0071 Fax: (91) 20 2422-0071
REST OF ASIA:
ANZ - Melbourne Tel: (613) 9737-4995 Fax: (613) 9737-4982 Korea Tel: (82) 31 3875 277 Fax: (82) 31 3875 288 Malaysia Tel: (604) 210-9688 Fax: (604) 210-9683 Philippines Tel: (65) 6844-1650 Fax: (604) 660-5883 ANZ - Sydney Tel: (614) 3413-4134 Fax: (613) 9737-4982 Thailand Tel: (662) 694 1368/9 Fax: (662) 694-1370 Vietnam Tel: (65) 6844-1650 Fax: (604) 660-5883
APAC
SUPPLIER LISTING
Magnetic Linear & Angular Position Sensor ICs, Magnetic Digital Position Sensor ICs, Current Sensor ICs, Magnetic Speed Sensor ICs, Motor Driver & Interface ICs, Regulators and Lighting
Graphical OS Chips, Display Modules, Boards
Video Encoders, Transcoders, Decoders, SoCs, Coprocessors Processors, Storage, Wireless, Switching, Digital Entertainment, Broadband, PC Connectivity, Transceivers, System Controllers, Powerline Communications Analog, High Bandwidth, Ethernet, RF Solutions
Dynamically Programmed Analog Signal Processors (dpASPs), Field Programmable Analog Arrays (FPAAs) Wireless Sensor Network Protocol and Silicon Solution for Ultra-Low Power Networking Applications RF Semiconductors, Fiber Optic Devices, Optocoupler & Solid State Relays, MeshConnect Wireless Modules & ICs Bluetooth, 802.11 Wi-Fi Modules, ZigBee, Wireless Accessories Wireless & Wired Embedded Solutions, Wireless Routers & Gateways, Cellular Modems & Peripherals, Remote Display Connectivity, Single-Board Computers and Operator Interfaces IP Cores and System-on-Chip Solutions
DC/DC Converters, AC/DC Power Supplies, Digital Panel Meters, Magnetics, Data Acquisition
DRAM components (SDR, DDR, DDR2, DDR3), Mobile DRAM (LPSDR, LPDDR, LPDDR2), DDR3 SDRAM Modules
Bluetooth Low Energy ICs, Single Chip ANT ICs, 2.4 GHz RF ICs, Sub 1 GHz RF ICs Audio/Speech, Telecommunications, Microcontrollers, Bus Interface, Power Management, I/O PCI Express, USB, Signal Conditions, Timing, Switching, Connectivity, Power Management
LED Modules/Arrays, LED Tube, Outdoor Lighting, BLU, Automotive, Middle Power LEDs, High Power LEDs, Flash LEDs Diodes, Bi-polar and MOSFET Transistors for High Reliability Applications
Power Management, ESD Protection, Timing and Synchronization, Optical Transport Equipment (SerDes), HiRel MIL, Low-Power RF, Digital Sensor/Signal Conditioning ICs (also see Gennum)
AC-DC Power Supplies, DC-DC Converters, Power Modules, Power Solutions, Power Supplies
Video Transport, Optical Modules, Signal Integrity (also see Semtech)
Automotive, Wireless Audio, USB, Ethernet & Embedded Networking, PC System and I/O Controllers, Storage, Thermal Management, Capacitive Touch Sensors LED Drivers, Electroluminescent Lamp Drivers, Medical Ultrasound, High Voltage Interface/Driver ICs
DRAM and SRAM Memory, Audio Drivers, Multi-function IO Drivers, LED Drivers, Temperature Sensors Clare - Display Products, High Voltage Devices, Optocouplers, ICs, Power Products, Solar Power Products, Solid State Relays, Telecom Products. Zilog - Microcontrollers (8, 16, 32-bit) TFT LCDs, TFT LCD with LED, Touch Screen Solutions, Color Graphic LCDs, Monochrome Graphic LCDs, Character LCDs Programmable Clock Devices, Programmable Power Manager Devices, Programmable Logic Data Conversion, Signal Conditioning, Power Management, Interface, High Frequency & Optical, Timing
AC-DC Off-line, DC-DC Switching Regulators, High Voltage Gate Drivers, Interface, System Test Ethernet Transceiver, Switches, and MACs, Transport Processing Products, Signal Integrity, Physical Media and Physical Layer Devices Transformers, Custom Magnetics, EMC Ferrites, Inductors, RF Components
SEMICONDUCTORS |
Embedded Solutions*
Signal Conditioning
System Monitoring
Optoelectronics
Power Supplies
Disk / Interface
System-Level*
Physical Layer
Bus Interface
Audio / Video
Converters
Processor
Datacom
SUPPLIER NAMES
Allegro MicroSystems, Inc. Amulet Technologies* Anadigm ANT / Dynastream* California Eastern Laboratories (CEL) connectBlue* Digi International Digital Core Design* Emerson Network Power Exar Corporation Excelsys Technologies Finisar Corporation GE Energy (formerly Lineage Power) H&D Wireless AB* IBM Semiconductor Solutions Integrated Silicon Solution, Inc. (ISSI) IXYS (includes Clare and Zilog) Kyocera (formerly Optrex)* Lattice Semiconductor Linear Technology Corporation Magnum Semiconductor Marvell Semiconductor Micrel Inc. Murata Power Solutions Nanya Technology Corporation N2Power Nordic Semiconductor ASA Nuvoton Technology Corporation Pericom Semiconductor Corporation Pletronics Inc. (PLE) Redpine Signals* Samsung LED Co Ltd Semicoa Semtech Corporation (includes Gennum) Silicon Motion Technology Corporation SMSC Supertex, Inc. SynQor Telefunken Semiconductors GmbH Vitesse Wrth Midcom
* Please refer to the Display / Embedded / System-Level table for more detailed product information.
Wireless
Telecom
Display*
Memory
Timing
Logic
Imaging Solutions
Cable Solutions
SUPPLIER NAMES D IS P L AY / E M B E D D ED S UP P L I ER S
AAEON Amulet Technologies Applied Concepts Axiomtek Connect Tech Digi International Digital View Emerging Display Technologies (EDT) Endicott Research Group, Inc. (ERG) Estecom-USA HanTouch USA IEI Technology Corp. Kordis Media Co., Ltd. Kyocera Display America, Inc. (formerly Optrex) Landmark Technology Lattice Semiconductor Leopard Imaging LG Display Microsemi NLT Technologies Nu Horizons Custom Solutions OSD Displays Pervasive Displays Pixel Qi Quadrangle Products Inc. Reach Technology Inc. Sharp Microelectronics of the Americas Tianma Touch International Touch Revolution
SYS T E M - L E VE L P R O D UC T S
ANT Cogent Connect Blue Digital Core Design H&D Wireless IAR Systems Icron Leopard Imaging Redpine Signals RF Digital
Not all lines are franchised in all Nu Horizons territories. Please refer to the APAC Supplier Listing and Franchise by Territory table for suppliers available in APAC region.
USB Solutions
Touchscreens
LCD Monitors
RF / Wireless
IP / Cores
Inverters
Displays
LIGHTING |
Power Solutions
Not all lines are franchised in all Nu Horizons territories. Please refer to the APAC Supplier Listing and Franchise by Territory table for suppliers available in APAC region.
ap.nuhorizons.com/featuredproducts
ap.nuhorizons.com/labcam
System Design
Light Engines
LED Drivers
Optics
LEDs
ap.nuhorizons.com/seminars
Application Notes
ap.nuhorizons.com/application_notes/
Development Tools
ap.nuhorizons.com/development
Nu Horizons and the Nu Horizons logo are registered trademarks of Arrow Electronics, Inc. Other trademarks and product information are the property of their respective owners.
youtube.com/nuhorizonsvideo