Professional Documents
Culture Documents
Backhoe Loaders
Backhoe Work Tools Buckets Auger Hydraulic Hammer Ripper Thumb Vibratory Plate Compactor
Loader Work Tools Buckets Pallet Forks Material Handling Arm Angle Blade Brooms Rake Asphalt Cutter Bale Spear Snow Plow
Caterpillar Work Tools have been developed specifically for Caterpillar Backhoe Loaders to deliver exceptional performance, versatility, serviceability and customer support. They include work tools for both ends of the machine: Backhoe Work Tools Buckets Auger Hydraulic Hammer Ripper Thumb Vibratory Plate Compactor Loader Work Tools Buckets Pallet Forks Material Handling Arm Angle Blade Brooms Rake Asphalt Cutter Bale Spear Snow Plow
Performance and Versatility. Cat Work Tools are designed to optimize machine versatility and flexibility, and to deliver maximum performance, durability and reliability when used on Cat Backhoe Loaders. They enable a single machine to perform a variety of tasks in a wide range of applications. For added versatility, some Cat Backhoe Loader Work Tools are interchangeable between Cat Integrated Toolcarriers, Small Wheel Loaders and Telehandlers. Consult individual machine Operation & Maintenance Manual for proper loading capabilities. Ease of Operation. These tools are designed with the operator in mind. Hook-up is easily accomplished for fast, secure work tool changes with the unique IT hydraulic quick coupler design. Hose routing, hose length and quick disconnects have been optimized to ensure proper guiding, protection and fit-up. Tool operation is easy with Cats excavator-style joystick design, which puts control of work tool functions at the operators fingertips.
Serviceability. Caterpillar Work Tools utilize proven components, such as Caterpillar hydraulic hose, couplings, O-ring face seals, hardware and Ground Engaging Tools (G.E.T.). Each of these components is easily replaceable to extend work tool life, simplify servicing and reduce downtime. Customer Support. Whether it is matching the right work tool to the right job, adding more work tools to your lineup or obtaining responsive and knowledgeable support, Caterpillar dealers are ready to assist you. Quick Couplers. Cat Backhoe (rear) Work Tools can be equipped with a manual quick coupler with pin grabber arrangement, allowing use of a wide range of compatible tools. Cat Loader (front) Work Tools use the proven Cat IT hydraulic quick coupler, which allows operators to quickly change from one high performance work tool to another.
Heavy duty rock buckets are available in five widths, all with standard Diagonal Retention System adapters and teeth. They are specifically designed to work in the harsh rocky conditions found in various regions of the world. - wrapper design is similar to heavy duty buckets but features prying capability and resistance to denting and crushing - side wear plates and transversely mounted wear strips under the bottom of the bucket provide added strength and durability High capacity buckets are offered in four pin-on widths and six pin-lock widths and are especially well suited for work in lower density soils and light materials. They have the same durable characteristics as heavy duty buckets but are capable of moving greater volumes. - a longer bucket floor provides greater capacity and allows an overall increase in tip radius
Coral buckets are specifically designed to work in rocky coral conditions such as those found on the southeastern coast of the United States. Four widths are available - shorter bucket floor with reinforced structure provides greater breakout force - 80 percent more Diagonal Retention System teeth than their heavy duty counterparts Ditch cleaning buckets are offered in three widths designed to provide optimum trenching, slope-cutting, grading and finishing work. Features include: - wide, shallow design, ideal for many types of applications - drainage holes in each side of the bucket allow water to drain while retaining material - internal bracing for structural support and rigidity
Cat Auger
Designed for drilling deep holes in many soil conditions.
The Caterpillar Auger is designed for drilling holes for footings, fence posts, signs, tree and shrub plantings, and light tower boring in construction, agricultural and landscaping applications. Designed with the right balance of speed and torque for maximum productivity in many soil types. The right amount of speed is necessary to efficiently move material up the auger bit and out of the hole. Optimal torque is required to prevent stalling when drilling in tough applications. Planetary drive unit with lock nut system provides reliable operation and superior shaft retention when boring in tough material. In-line double reduction planetary reduction gearbox multiplies torque output for efficient operation. 2-inch HEX output drive shaft provides strongest industry connection to auger bit.
Cat Thumb
Designed for grasping irregular shaped objects with ease.
Caterpillar Thumbs are designed to work with backhoe buckets to easily grab, pick up, handle and load irregular or loose material. Thumbs are ideal for handling wooden logs, poles, brush, metal, trash, rock and debris in site clean up, land clearing, landscaping, material handling and construction applications. Caterpillar offers two styles of thumbs with both stiff link and hydraulic cylinder actuation. Pivot mount allows thumb to follow bucket path during rotation. Interchangeable tines designed for specific job requirements and application versatility. Retractable thumb allows normal bucket loading when not in use. Convertible base thumb can be easily changed from stiff link to hydraulic cylinder actuation.
Cat Ripper
Well suited for pipeline and trenching work.
The Caterpillar Ripper is designed to break up hard soil and ice during ground preparation work. Single-tooth design. Reinforced one-piece shank is made of high wear-resistant Hardox 400 steel.
Multi purpose bucket with foldover forks is similar to the multi purpose bucket but the fold-over forks increase its ability to grasp irregularly shaped objects. - bucket/fork combination offers quick fork action while providing constant bucket capability - fold-over forks are attached to a bracket mounted behind the bucket Side-dump bucket is designed for loading, carrying, leveling, backfilling and dumping in a variety of applications and materials. Capable of dumping forward or to the left side, this bucket offers the versatility required in tight work areas and congested environments. - hardened steel base and side cutting edges provide excellent penetration, durability and wear life - bucket frame is line-bored to ensure rigid mounting - hinge and cylinder pins are plated to protect against corrosion
Light material bucket has the largest capacity. It is specially designed for light, loosely packed materials. - formed back wrapper with optimum angle for enhanced loadability and superior bucket fill - rounded corners help reduce material packing - long floor length and tall back height provide excellent material retention and a large payload capacity Penetration bucket is ideal for light duty excavating, finishing and cleanup applications. It is best suited for site development and finish landscaping. - flat floor and flush-mounted, weld-on adapters deliver a smooth, level cut - flush-mounted teeth, sharp base edge and sharp, curved sidebars provide maximum penetration
Cat Brooms
Collect or windrow dirt and debris from a variety of surfaces.
Caterpillar Pickup and Angle Brooms are designed for cleanup work on many types of surfaces in many different applications. Pickup brooms sweep material into an integrated hopper for easy removal and dumping. Angle brooms use a windrowing action to move debris ahead and to the side for later collection. Pickup brooms feature: - direct drive by dual in-line motors that require no support bearings - maintenance free broom bearings - standard water sprinkler kit Angle brooms feature: - unique suspension system that eliminates the need for support wheels - 30-degree angling, left and right - supports for stable, secure parking Optional brushes steel wire, polypropylene or a combination are available for various surface requirements
10
Cat Rake
Designed for land clearing in loose soil conditions.
The Caterpillar Loader Rake is a durable, high capacity tool designed for land clearing applications in sandy or loose soil. It is also useful for piling brush, stacking and carrying debris and loading trucks. Built tough with thick, fabricated teeth, heavy duty push bar and serrated tree pusher. High brush rack helps retain the load, preventing back spillage and increasing carrying capacity.
11
12
305 (12) 79 (2.8) 98 (216) 3 909 (35.8) 305 (12) 79 (2.8) 107 (235) 3 909 (35.8) 305 (12) 96 (3.4) 127 (278) 3 993 (39)
457 (18) 119 (4.2) 116 (255) 4 909 (35.8) 406 (16) 105 (3.7) 123 (270) 3 909 (35.8) 406 (16) 122 (4.3) 144 (317) 3 993 (39) 457 (18) 127 (4.6) 138 (304) 4 988 (38.9) 610 (24) 241 (8.5) 174 (384) 5 1084 (42.7)
610 (24) 176 (6.2) 135 (298) 5 909 (35.8) 457 (18) 119 (4.2) 178 (6.3) 129 (283) 172 (381) 4 909 (35.8) 457 (18) 139 (4.9) 150 (330) 4 993 (39) 610 (24) 198 (7.0) 173 (381) 5 988 (38.9) 762 (30) 320 (11.3) 192 (423) 5 1084 (42.7)
762 (30) 232 (8.2) 150 (331) 5 909 (35.8) 610 (24) 176 (6.2) 269 (9.5) 153 (337) 208 (459) 5 909 (35.8) 610 (24) 207 (7.3) 346 (12.2) 180 (397) 338 (745) 5 4 993 (39) 762 (30) 255 (9.5) 180 (396) 5 988 (38.9) 914 (36) 380 (13.4) 218 (479) 6 1084 (42.7)
914 (36) 292 (10.3) 170 (373) 6 909 (35.8) 762 (30) 232 (8.2) 351 (12.4) 170 (375) 227 (501) 5 909 (35.8) 762 (30) 275 (9.7) 498 (17.6) 205 (452) 381 (840) 5 4 993 (39) 914 (36) 311 (11.5) 205 (451) 6 988 (38.9) 914 (36) 292 (10.3) 439 (15.5) 194 (426) 254 (561) 6 909 (35.8) 914 (36) 346 (12.2) 575 (20.3) 236 (519) 433 (955) 6 5 993 (39)
Heavy Duty Rock Buckets (Pin-On) Width mm (in) 305 (12) Rated Bucket Capacity* L (ft3) 416D 430D 70 (2.5) Weight** kg (lb) 416D 430D 114 (251) Number of Teeth 3 Tip Radius*** mm (in) 988 (38.9) High Capacity Buckets (Pin-On) Width mm (in) Rated Capacity* L (ft3) Weight** kg (lb) Number of Teeth Tip Radius*** mm (in)
* ** *** ****
Heaped Capacity shown as per SAE J/ISO 7451. Weight with weld-on adapters and pin-on teeth. Tip radius measurement includes ex-factory G.E.T. Cutting edge only. No G.E.T. available.
13
406 (16) 159 (5.6) 164 (362) 3 1168 (46) 457 (18) 96 (3.4) 146 (322) 6 855 (33.7) 1372 (54) 425 (15) 252 (555) 797 (31.4)
457 (18) 184 (6.5) 172 (378) 4 1168 (46) 610 (24) 142 (5.0) 173 (382) 8 855 (33.7) 1524 (60) 481 (17) 272 (600) 797 (31.4)
610 (24) 272 (9.6) 204 (448) 5 1168 (46) 762 (30) 190 (6.7) 199 (439) 10 855 (33.7)
305 (12) 65 (2.3) 122 (270) 4 855 (33.7) 1219 (48) 368 (13) 231 (510) 797 (31.4)
Housing Diameter mm (in) Swing Range Backward/Forward degrees Swing Range Backward length mm (in) Swing Range Forward length mm (in) Total Weight w/o Bit kg (lb) Drive Method Motor Displacement cc/rev (in3/rev) Drive Gear Reduction Maximum Hydraulic Flow Continuous L/min (gpm) Maximum Hydraulic Flow Intermittent L/min (gpm) Maximum Hydraulic Pressure Continuous bar (psi) Maximum Hydraulic Pressure Intermittent bar (psi) Drive Shaft Torque @ 3000 psi Nm (lb-ft) Drive Shaft Torque @ 3300 psi Nm (lb-ft) Drive Shaft Torque @ 3625 psi Nm (lb-ft) Bit Speed (Drive Shaft) @ 25, 32, 40 gpm rpm HEX Output Shaft Size mm (in) Hydraulic Hammers
280 (11.0) 57/58 1632 (64.3) 1632 (64.3) 183 (403.5) Gear Motor-Double Planetary Reduction 43.77 (2.67) 33.79:1 95 (25) 151 (40) 250 (3625) 290 (4206) 4728 (3487) 5208 (3841) 5711 (4212) 60, 76, 95 51 (2)
280 (11.0) 70/60 1816 (71.5) 1671 (65.8) 201 (443.2) Gear Motor-Double Planetary Reduction 43.77 (2.67) 33.79:1 95 (25) 151 (40) 250 (3625) 290 (4206) 4728 (3487) 5208 (3841) 5711 (4212) 60, 76, 95 51 (2)
H100/H100s
H70/H70s
H90C/H90Cs
Recommended Carrier Weight kg (lb) Working Weight kg (lb) Impact Frequency (beats per min) Certified CIMA Tool Energy J (ft-lb) Acceptable Oil Flow L/min (gpm) Operating Pressure kPa (psi) Tool Diameter mm (in)
* ** *** **** Heaped Capacity shown as per SAE J/ISO 7451. Weight with weld-on adapters and pin-on teeth. Tip radius measurement includes ex-factory G.E.T. Cutting edge only. No G.E.T. available.
5000-8000 (11,000-17,600) 370 (815)/419 (924) 600-1800 622 (459) 50-150 (13-39) 13 000 (1885) 70 (2.76)
7000-12 000 (15,400-26,400) 547 (1206)/600 (1323) 500-1300 735 (542) 60-150 (16-39) 13 000 (1885) 84 (3.31)
8000-14 000 (17,600-30,800) 720 (1587)/830 (1830) 430-1100 1152 (850) 60-120 (16-31) 14 000 (2031) 95 (3.74)
14
Vibratory Plate Compactor Weight (w/o bracket, blade) kg (lb) Impulse Force kN (lb) Impact Frequency blows per minute Plate Dimensions mm (in) Plate Area m2 (ft2) Height mm (in) Width mm (in) Ripper Length mm (in) Weight kg (lb)
401 (884) 40 (8928) 2200 584 965 (23 0.57 (6.1) 622 (24.5) 584 (23) 610 (24) 95 (209)
38)
Thumb Weight, Thumb Base kg (lb) Weight, Tines 24 in (610 mm) Heavy Duty Bucket kg (lb) Weight, Tines 24 in (610 mm) Rock Bucket kg (lb) Weight, Tines 24 in (610 mm) Heavy Duty Bucket w/ coupler kg (lb) Weight, Tines 24 in (610 mm) Rock Bucket w/ coupler kg (lb) Weight, Telescopic Fixed-Link kg (lb) Weight, Cylinder kg (lb) Cylinder Stroke mm (in) Maximum Operating Pressure bar (psi) Maximum Cylinder Force N (lb) Fully Retracted Angle1 Standard Stick model Fully Extended Angle1,2 Standard Stick model Fully Extended Angle1 Fixed-Link Version Maximum force supported by thumb bar (psi)
1 2
48 (106) 35 (77) 38 (84) 51 (112) 54 (119) 26 (57) 33 (73) 595 (23) 172 (2500) 98 000 (23,030) 18 126 90 98 000 (23,030)
Measured between bottom of stick and top of thumb. Applicable only to hydraulic version.
416D 430D Standard Duty Bucket Heavy Duty Bucket Heavy Duty Rock Bucket High Capacity Bucket Coral Bucket Ditch Cleaning Bucket 446B Heavy Duty Bucket Extreme Service Bucket
Available option.
15
Standard Duty Buckets 305 mm (12 in) 457 mm (18 in) 610 mm (24 in) 762 mm (30 in) 914 mm (36 in) Heavy Duty Buckets* 305 mm (12 in) 406 mm (16 in) 457 mm (18 in) 610 mm (24 in) 762 mm (30 in) 914 mm (36 in) Heavy Duty Rock Buckets 305 mm (12 in) 457 mm (18 in) 610 mm (24 in) 762 mm (30 in) 914 mm (36 in) High Capacity Buckets* 305 mm (12 in)** 406 mm (16 in)** 457 mm (18 in) 610 mm (24 in) 762 mm (30 in) 914 mm (36 in) Coral Buckets 305 mm (12 in) 457 mm (18 in) 610 mm (24 in) 762 mm (30 in) Ditch Cleaning Buckets 1219 mm (48 in)* 1372 mm (54 in) 1524 mm (60 in) Extreme Service Buckets 610 mm (24 in) 762 mm (30 in)
* Pin-On and Pin-Lock. ** Pin-Lock only. Provides optimum system performance. ! Not approved. Do not use.
! ! ! ! ! ! !
! ! ! ! ! ! ! ! ! ! ! ! ! ! !
! !
! !
! !
16
Auger A26B (Pin-On) A26B (Pin-Lock) Hydraulic Hammers H70/H70s H90C/H90Cs H100/H100s Vibratory Plate Compactor CVP40 Ripper 610 mm (24 in) Thumb*** 610 mm (24 in) Buckets 610 mm (24 in) Buckets w/coupler
*** Stiff Link/Hydraulic standard stick machines only. Provides optimum system performance. ! Not approved. Do not use.
! ! !
! ! !
17
2262 (89) 0.76 (1.0) 1.15 (1.5) 380 (838) 2262 (89) 0.96 (1.25) 659 (1453) 659 (1453)
2262 (89) 0.96 (1.25) 1.34 (1.75) 428 (944) 446 (983) 2406 (95) 1.03 (1.35) 682 (1504) 682 (1504) 2406 (95) 1.03 (1.35) 682 (1504) 1060 (42) 80 (3.2) 40 (1.6) 2765 (109) 1.3 (1.0) 1704 (773) 2064 (936) 2957 (1341) 2590 (102) 1.9 (2.5) 577 (1272) 659 (1453) 2433 (96) 1.3 (1.7) 532 (1172) 532 (1172)
2406 (95) 1.00 (1.31) 440 (970) 459 (1012) 2434 (96) 1.25 (1.63) 891 (1965)
Multi Purpose Buckets with Fold-Over Forks Width mm (in) 2262 (89) Rated Bucket Capacity* m3 (yd3) 0.96 (1.25) Weight (ST) kg (lb) 659 (1453) Fork Tine Length mm (in) 1060 (42) Fork Tine Width mm (in) 80 (3.2) Fork Tine Thickness mm (in) 40 (1.6) Side Dump Buckets Width mm (in) Rated Bucket Capacity* m3 (yd3) Weight (ST) kg (lb) Weight (IT) kg (lb) Weight (446B-ST) Light Material Buckets Width mm (in) Rated Bucket Capacity* m3 (yd3) Weight (ST) kg (lb) Weight (IT) kg (lb) Penetration Buckets Width mm (in) Rated Bucket Capacity* m3 (yd3) Weight (ST) kg (lb) Weight (IT) kg (lb) 2505 (99) 1.0 (0.8) 1504 (682) 1804 (818) 2438 (96) 1.5 (2.0) 726 (1600) 2324 (92) 1.0 (1.3) 440 (969)
2590 (102) 2.3 (3.0) 609 (1343) 773 (1704) 2433 (96) 1.5 (2.0) 699 (1542)
2616 (103) 2.3 (3.0) 768 (1693) 2591 (102) 1.7 (2.3) 763 (1683)
18
Pallet Forks* Fork Tine Length mm (in) Fork Tine Width mm (in) Fork Tine Thickness mm (in) Operating Load (420D IT)1 kg (lb) Operating Load (430D IT)1 kg (lb) Operating Load (420D IT)2 kg (lb) Operating Load (430D IT)2 kg (lb) Load Center mm (in) Material Handling Arm** Length (Retracted) mm (in) Length (Midpoint) mm (in) Length (Extended) mm (in) Operating Load3 (Retracted) kg (lb) Operating Load3 (Midpoint) kg (lb) Operating Load3 (Extended) kg (lb) Angle Blades Straight Width mm (in) Height mm (in) Actuation Angle Width mm (in) Weight (IT) kg (lb) Pickup Broom*** Overall Width mm (in) Operating Width mm (in) Maximum Height mm (in) Bristle Diameter mm (in) Water Tank Volume L (gal) Effective Waste Volume L (yd3) Weight kg (lb) Weight w/Filled Water Tank, Container4 kg (lb) Angle Broom*** Overall Width mm (in) Operating Width mm (in) Operating Width (at 30 degree angle) mm (in) Bristle Diameter mm (in) Weight kg (lb)
1050 (41) 130 (5) 50 (2) 2065 (4553) 2160 (4763) 2340 (5160) 2315 (5105) 525 (21) 3090 (122) 4090 (161) 5090 (200) 925 (2040) 580 (1279) 425 (937) 3099 (122) 762 (30) manual 2794 (110) 816 (1800) 2700 (106.3) 2500 (98.4) 1300 (51.2) 700 (27.5) 400 (104) 680 (0.88) 650 (1435) 1770 (3905) 2700 (106.3) 2500 (98.4) 2200 (86.6) 700 (27.5) 389 (858)
200 (47) 130 (5) 50 (2) 1990 (4388) 2020 (4454) 2320 (5116) 2300 (5072) 600 (24)
1350 (53) 130 (5) 50 (2) 1855 (4090) 1840 (4057) 2295 (5060) 2275 (5016) 675 (27)
* Specifications include lubricants, full fuel tank, ROPS cab, 176 lb. operator, 1250 lb. counterweight, standard tires, standard stick, 24-in. heavy duty rear bucket, 2WD. Note: Machine stability is affected by machine options and backhoe attachments. ** Hydraulically limited. *** Requires IT Hydraulic Quick Coupler. 1 Tip limited. Operating Load per SAE J1197 FEB91. 2 Hydraulically limited. Operating Load per CEN474-4 FEB96. 3 Operating Load per SAE J1197 FEB91 and CEN474-4 FEB96. 4 Maximum material density of 1400-1500 kg/m3 (2360-2530 lb/yd3).
19
2096 (82.5) 318 (12.5) 7 499 (1100) 511 (1125) 470 (18.5) 660 (26) 1265 (50) 170 (370) 127 (5) 51 (2) 1219 (48) 1372 (54) 483 (19) 848 (1870) 935 (37) 3040 (120) 3105 (122) 2635 (104) 63.5 (2.5) 1219 (48) 1372 (54) 483 (19) 870 (1915) 935 (37) 3344 (132) 3410 (134) 2896 (114) 950 (2090) 935 (37) 3655 (144) 3725 (146) 3165 (125)
416D 430D General Purpose Bucket Multi Purpose Bucket Multi Purpose Bucket w/Forks Side Dump Bucket Light Material Bucket Penetration Bucket 446B General Purpose Bucket Multi Purpose Bucket Side Dump Bucket Light Material Bucket Penetration Bucket
Available option.
20
General Purpose Buckets 0.76 m3 (1.0 yd3) ST 0.96 m3 (1.25 yd3) ST 0.96 m3 (1.25 yd3) IT 1.0 m3 (1.31 yd3) ST 1.0 m3 (1.31 yd3) IT 1.07 m3 (1.40 yd3) ST 1.15 m3 (1.50 yd3) ST 1.15 m3 (1.50 yd3) IT 1.34 m3 (1.75 yd3) ST Multi Purpose Buckets 0.96 m3 (1.25 yd3) ST 0.96 m3 (1.25 yd3) IT 1.03 m3 (1.35 yd3) ST 1.03 m3 (1.35 yd3) IT 1.25 m3 (1.63 yd3) ST Multi Purpose Buckets with Forks 0.96 m3 (1.25 yd3) ST 1.03 m3 (1.35 yd3) ST Side Dump Buckets 1.0 m3 (0.8 yd3) ST 1.0 m3 (0.8 yd3) IT 1.3 m3 (1.0 yd3) ST 1.3 m3 (1.0 yd3) IT Light Material Buckets 1.5 m3 (2.0 yd3) ST 1.9 m3 (2.5 yd3) ST 1.9 m3 (2.5 yd3) IT 2.3 m3 (3.0 yd3) ST 2.3 m3 (3.0 yd3) IT Penetration Buckets 1.0 m3 (1.3 yd3) IT 1.3 m3 (1.7 yd3) ST 1.3 m3 (1.7 yd3) IT 1.5 m3 (2.0 yd3) IT 1.7 m3 (2.3 yd3) IT
Provides optimum system performance. ! Not approved. Do not use.
! ! ! ! ! ! !
! ! !
! ! ! ! ! !
! ! !
! ! ! !
! ! ! !
! ! ! !
! ! ! !
! !
! !
! ! ! ! ! !
! ! !
21
Pallet Forks IT Model Material Handling Arm IT Model Angle Blades IT model 3099 mm (122 in) manual 3099 mm (122 in) hydraulic 2667 mm (105 in) manual 2813 mm (110.75 in) hydraulic Pickup Broom IT model BP 25 Angle Broom IT model BA 25 Rakes 2096 mm (82.5 in) (ST) 2096 mm (82.5 in) (IT) Asphalt Cutter 470 mm (18.5 in) Cutting Wheel Bale Spear 51 mm (2 in) Stinger (IT) 63.5 mm (2.5 in) Stinger (IT) Snow Plow 3040 mm (120 in) 3344 mm (132 in) 3655 mm (144 in)
Provides optimum system performance. ! Not approved. Do not use.
! ! ! ! ! !
! ! ! ! ! !
! ! ! !
! ! ! !
22
Notes
23
www.CAT.com 2003 Caterpillar Printed in U.S.A. Materials and specifications are subject to change without notice. Featured machines in photos may include additional equipment. See your Caterpillar dealer for available options.
AEHQ5410-01 (11-03)