You are on page 1of 20

Side Channel Pumps

Self-priming, segmental type

AKH 1101 6103


Technical data
Capacity: Head: Speed: Temperature: Casing pressure: Shaft sealing: Flange connections: Direction of rotation: from 0,2 up to 35 m/h from 6 up to 144 m 1450 rpm (max. 1800 rpm) max. 120 C PN 16 stuffing box or mechanical seal DIN 2501 / PN 16 clockwise (when seen from the drive end)

Application
The Sterling SIHI AKH pump is a self-priming side channel pump capable of handling gas along with the medium and operates at a low noise level. The AKH is suitable for trouble free handling of clean or turbid liquids without any abrasive particles. The performance curve steepness admits a precise regulation of the pressure with a small change in capacity. The AKH pump has been developed for a broad range of medium duty applications in: Chemical industry, Petro-Chemical industry, Oil industry, Machinery and automobile industry , Food industry, Building trades, Plastic and rubber industry, Surface treatment, Ship yards.

Construction
Casing pressure
Maximum 16 bar from -40 C up to +120 C. Please observe Technical rules and safety regulations: Casing pressure = inlet pressure + delivery head at minimum pump capacity.

Position of branches
Suction and discharge branch point radially upwards.

Flanges
The flanges correspond to DIN EN 1092-2 / PN 16. Flange design as per DIN 2512 with groove or drilled according to ANSI 150 or 300 lbs is basically possible.

Bearing

Design
Pumps of the series AKH have a segmental type construction with open vane wheel impellers. The pump construction is either with one liquid surrounded slide bearing and one ball bearing or in a more industrial construction by using a double ball bearing design. The program comprises 6 sizes with up to 4 stages (an extension with 5 or 6 stages is possible for certain sizes). The performance curves of the AKH are identical for all the material designs. The applied hydraulic components are from our Modular Side Channel system (interchangeability of parts).

Either by one grease lubricated ball bearing and one liquid surrouned sleeve bearing (design A) or by two grease lubricated ball bearings (design B). The ball bearings are according to DIN 625. The first grease filling is done in the factory.

Direction of rotation
Clockwise, when looking at the pump from the drive end. Anti-clockwise is possible.

Shaft sealing
The shaft can be sealed by either a stuffing box or a standard mechanical seal.

Sterling Fluid Systems Pumping Technology AKH-00 2003

Material design AKH


Cast iron
Pos 1060 1070 1090 1140 1141 2100 2350 0241 Components 0A Suction casing Discharge casing EN-GJL-250 Intermediate piece Shaft Vane wheel impeller Bearing bush CuZn40Al2 X 20 Cr 13 G-X 3 CrNiMoCuN 26 6 3 3 EK 2203 PAEK Material design 0B 0F

Stainless steel and Bronze


Pos 1060 1070 1090 1140 1141 2100 2350 0241 Components 2H* Suction casing Discharge casing Intermediate piece Shaft Vane wheel impeller Bearing bush G-Cu Sn chrome plated EN-GJL-250 Material design 3B GC-CuSn 12 G-X 6 CrNiMo 18 10 G-Sn Bz 16 X 5 CrNiMo 17 12 2 G-Cu Sn chrome plated EK 2203 G-X 3 CrNiMoCuN 26 6 3 3 PAEK 4B 4F

* The construction of the AKH in material 2H is conform the construction of the AKH in Cast iron (see the next page)

Casing seal
The casing can be sealed with a liquid sealing compound or soft Teflon.

General comments
Side Channel pumps with the same hydraulic construction are manufactured in series as: AOH Low duty pump with oval flanges, PN 10 CEH High duty pump, PN 40 Also available with magnetic coupling CEB Vertical tank mounted pump, PN 25 with magnetic coupling CEV Vertical tank mounted pump, PN 25 with mechanical seal (replacement for CVGP)

Drive
By electric motor, type of construction IM B3.

AEH High duty pump, PN 40 Also available with magnetic coupling


Technical documents about these pump series will be readily supplied on request.

Sterling Fluid Systems Pumping Technology AKH-00 / 2003

Page 2 / 20

Sectional drawing and parts list AKH (typical)


AKH in Cast iron (0A, 0B, 0F, 2H) 1070 1060

2350

2100

Design A (only for sizes 1100 up to 5100)

0241

1141

1140

1090

4330

Pos.
0241 1060 1070 1090 1140 1141 1800 2100 2350 3500 4330 4610

Components
Bearing bush Suction casing Discharge casing Suction intermediate piece Discharge intermediate piece Discharge intermediate piece Mounting flange Shaft Vane wheel impeller Bearing housing Mechanical seal Stuffing box

Design B

Stuffing box (available for all material designs)

AKH in Bronze (3B) and Stainless steel (4B and 4F) 1070 1060 2100 4610

2350

3500

1800 Design A (only for Stainless steel in sizes 1200 up to 5100)

0241

1141

1140

1090

4330

Design B All possible design combinations can be found in the delivery program
Sterling Fluid Systems Pumping Technology AKH-00 / 2003 Page 3 / 20

Performance range AKH


General conditions
Liquid: Density: Viscosity: Temperature: Atmospheric pressure: Water 1 kg/dm3 1 cSt 20 C 1013 mbar

Characteristic tolerances
Capacity 10% - Delivery head 10% - Power + 10% For designs with a mechanical seal or a casing seal of soft Teflon, the tolerance for the delivery head is extended by 2% each.

Measuring standard
According to ISO 5198

150

n = 1450 rpm

H (m)

100

1100* 50

1200

3100

3600

4100

5100

6100

0 0,2

0,4

0,6

0,8 1

10

20

* only for cast iron design

Q (m3/h)

40

Sterling Fluid Systems Pumping Technology AKH-00 / 2003

Page 4 / 20

Dimension chart, Pump set drawing and Performance curves


AKH 1100 in cast iron (0A, 0B, 0F, 2H)

H (m) 100 80 60 40 20 0 P (kW) 1,2 0,8 0,4 0 NPSH (m) 2 1 0,2 0,4 0,6 0,8 1,0 1,2
1104 1103
110 4
1103

w 1450 rpm 119 57,5 G a 145 25 4

1102
1101

50

G m2

m1

f1 v

e1 w1
14x4

1102
1101

115 85

100

11j5

DN25

90
13

13 12,6 36 c

h3 d

1,4

1,6 Q (m3/h)

120 156

e2 b2

General: Characteristic tolerances:

Values are valid for water = 1 kg/dm3 and = 1 cSt. Capacity 5% - Delivery head 5% - Power + 10%. For designs with a mechanical seal or casing seal of soft Teflon, the tolerance for the delivery head is extended by 2% each.

Pump Motor size kW size 71 1101 0.37 1102 0.55 80 80 1103 0.75 1.1 90S 80 1104 0.75 1.1 90S

Base Coupling Weight plate pump set P007 B68 14 35 P007 B68 15 38 45 P008 B68 17 48 P008 50 B68 19 P210 55

a 120 120 154 188

b2 317 317 297 297 300

c d e1 20 15 350 20 15 350 20 15 400 20 15 400 25 19 420

e2 285 285 265 265 260

v 110 110 120 120 115

f1 h3 m 1 m 2 53 125 182 146 53 125 182 146 53 130 216 180 53 130 250 214 155

w* 627 661 695 753 729 787

w1 570 570 640 640 650

* Design B - dimensions depend upon the motor brand. The weight of the pump in design A will be approximately 1 kg less.

Sterling Fluid Systems Pumping Technology AKH-00 / 2003

Page 5 / 20

Dimension chart, Pump set drawing and Performance curves


AKH 1200 in cast iron (0A, 0B, 0F, 2H)

H (m) 100 80 60 40 20 0 P (kW) 1,6 1,2 0,8 0,4 0 NPSH (m) 3 2 1

12

04

1450 rpm

w 119 57,5 G a 145 25 4

120

1202

1201

50

G m2

m1

f1 v
1204 1203
1202

e1 w1
14x4 115 85

1201

100

11j5

DN25

90
13

13 12,6 h3 36 c d

0,5

1,0

1,5

2,0

Q (m3/h)

2,5 120 156 e2 b2

General: Characteristic tolerances:

Values are valid for water = 1 kg/dm3 and = 1 cSt. Capacity 5% - Delivery head 5% - Power + 10%. For designs with a mechanical seal or casing seal of soft Teflon, the tolerance for the delivery head is extended by 2% each.

Pump Motor size kW size 0.37 71 1201 0.55 80 0.55 80 1202 0.75 80 0.75 80 1203 1.1 90S 1.1 90S 1204 1.5 90L

Base Coupling Weight plate pump set 35 P007 B68 14 37 38 P007 B68 15 39 45 P008 B68 17 48 P210 52 B68 19 P241 59

a 120 120 154 188

b2

e1

e2 285 285 265 260 290

v 110 110 120 115 125

f1

h3

m1 m2

317 20 15 350 317 20 15 350 297 20 15 400 300 330 25 19 420 480

53 125 182 146 53 125 182 146 53 130 216 180 53 155 250 214

w* 627 661 661 695 753 787

w1 570 570 640 650 730

* Design B - dimensions depend upon the motor brand. The weight of the pump in design A will be approximately 1 kg less.

Sterling Fluid Systems Pumping Technology AKH-00 / 2003

Page 6 / 20

Dimension chart, Pump set drawing and Performance curves


AKH 3100 in cast iron (0A, 0B, 0F, 2H)

H 140 (m) 120 100 80 60 40 20 0 P (kW) 3 2 1 0 NPSH (m) 2 1 1

31

04

1450 rpm

w 125 70 G a 159 40 4

310

3102

3101

55

G m2

m1

f1 v
3103
3104

e1 w1
18x4 140 100

3102

3101

112

16j5

DN32

112
13

15

18,1 h3 47 c d

Q (m3/h)

160 218

e2 b2

General: Characteristic tolerances:

Values are valid for water = 1 kg/dm3 and = 1 cSt. Capacity 5% - Delivery head 5% - Power + 10%. For designs with a mechanical seal or casing seal of soft Teflon, the tolerance for the delivery head is extended by 2% each.

Pump Motor size kW size 0.75 80 3101 1.1 90S 1.1 90S 3102 1.5 90L 2.2 100L 2.2 100L 3103 3 100L 2.2 100L 3104 3 100L 4 112M

Base Coupling Weight plate pump set 50 P008 B68 22 56 55 P008 B68 23 59 P241 B80 70 73 P241 B80 26 74 80 P272 B80 29 81 99

a 145 145 185 225

b2

e1

e2 265 265 290 290 320

v 120 120 125 125 140

f1

h3

m1 m2

297 20 15 400 297 20 15 400 330 25 19 480 330 25 19 480 360 25 19 540

56 152 214 178 56 152 177 56 177 254 218 56 177 294 258 214 178

w* 706 764 764 805 845 885 906

w1 640 640 730 730 730

* Design B - dimensions depend upon the motor brand. The weight of the pump in design A will be approximately 2,5 kg less.

Sterling Fluid Systems Pumping Technology AKH-00 / 2003

Page 7 / 20

Dimension chart, Pump set drawing and Performance curves


AKH 3600 in cast iron (0A, 0B, 0F, 2H)

H (m) 100 80 60 40 20 0 P (kW) 5 4 3 2 1 0 NPSH (m) 2 1

36

04

w 1450 rpm 125 70 G a 159 40 4

360

3602

3601

55

G m2

m1

f1 v

e1 w1
18x4 140 100

3604 3603 3602 3601

112

16j5

DN32

112
13

15

18,1 h3 47 c d

Q (m3/h)

160 218

e2 b2

General: Characteristic tolerances:

Values are valid for water = 1 kg/dm3 and = 1 cSt. Capacity 5% - Delivery head 5% - Power + 10%. For designs with a mechanical seal or casing seal of soft Teflon, the tolerance for the delivery head is extended by 2% each.

Pump Motor size kW size 0.75 80 3601 1.1 90S 1.5 90L 3602 2.2 100L 2.2 100L 3103 3 100L 4 112M 3 100L 3604 4 112M 5.5 132S

Base Coupling Weight plate pump set 50 P008 B68 22 56 P008 B68 59 23 P241 B80 70 70 P241 B80 26 73 74 81 P272 B80 29 99 126 P015 B95

a 145 145 185

b2

e1

e2 265 265 290 290 320 325

v 120 120 125 125 140 160

f1

h3

m1 m2

297 20 15 400 297 20 15 400 330 25 19 480 330 25 19 480 360 361 19 540 15 600

56 152 214 178 56 152 214 178 177

w* 706 764 764 805 845 866 885 906 982

w1 640 640 730 730 820 920

56 177 254 218 177 182

225

25

56

294 258

* Design B - dimensions depend upon the motor brand. The weight of the pump in design A will be app. 2,5 kg less.

Sterling Fluid Systems Pumping Technology AKH-00 / 2003

Page 8 / 20

Dimension chart, Pump set drawing and Performance curves


AKH 4100 in cast iron (0A, 0B, 0F, 2H)

H (m) 120 100 80 60 40 20 0 P (kW) 6 4 2 0 NPSH (m) 4 2 0


4102

1450 rpm
41 04
3

157 75 G a

w 205 45 4

410

4101

55

G m2

m1

f1 v
4104

e1 w1
18x4

4103

4102
4101

150 110

132

19j5

DN40

132
13

20

21,5 h3 47 c d

10

11

12 Q (m3/h)

160 218

e2 b2

General: Characteristic tolerances:

Values are valid for water = 1 kg/dm3 and = 1 cSt. Capacity 5% - Delivery head 5% - Power + 10%. For designs with a mechanical seal or casing seal of soft Teflon, the tolerance for the delivery head is extended by 2% each.

Pump Motor size kW size 1.5 90L 4101 2.2 100L 2.2 100L 4102 3 100L 4 112M 4 112M 4103 5.5 132S 4 112M 4104 5.5 132S 7.5 132M

Base Coupling Weight plate pump set B68 69 P241 28 B80 76 86 P272 B80 34 87 105 B80 116 P015 40 B95 137 P015 B80 121 45 158 P017 B95 168

a 155 210 265 320

b2

e1

e2 290 320 325 325

v 125 140 160 160 200

f1

h3

m1 m2

330 25 19 480 360 25 19 540 361 25 15 600 600 361 25 15 700

42 197 195 159 42 197 250 214

w* 852 893 948

w1 730 820 920 920 1100

969 1024 42 182 305 269 1100 182 1079 42 192 360 324 1155 1181

* Design B - dimensions depend upon the motor brand. The weight of the pump in design A will be approximately 3 kg less.

Sterling Fluid Systems Pumping Technology AKH-00 / 2003

Page 9 / 20

Dimension chart, Pump set drawing and Performance curves


AKH 5100 in cast iron (0A, 0B, 0F, 2H)

H (m) 100 80 60 40 20 0 P (kW) 10 8 6 4 2 0 NPSH (m) 4 2 10

51

03

w 1450 rpm 168 82,5 a 217 50 4

5102

5101

55

G m2

m1

f1 v
5103

e1 w1
18x4 165 125

5102

5101

140

24j5

DN50

150
13

20

26,9 h3 47 c d

12

14

16

18

Q 20 (m3/h)

160 218

e2 b2

General: Characteristic tolerances:

Values are valid for water = 1 kg/dm3 and = 1 cSt. Capacity 5% - Delivery head 5% - Power + 10%. For designs with a mechanical seal or casing seal of soft Teflon, the tolerance for the delivery head is extended by 2% each.

Pump Motor size kW size 3 100L 5101 4 112M 5.5 132S 5102 7.5 132M 11 160M 7.5 132M 5103 11 160M 15 160L

Base Coupling Weight plate pump set 89 P272 B80 36 107 143 P015 B95 46 153 P344 216 P015 178 B95 55 262 P385 B110 283

a 170 245 320

b2 360 361

e1

e2 320 325 400 325 440

v 140 160 180 200

25 19 540 25 15 600

450 30 24 660 361 25 15 700 490 30 24 740

w* 931 48 215 220 185 952 1103 200 48 295 260 1129 240 1221 210 1204 48 240 370 335 1296 1358

f1

h3

m1 m2

w1 820 920 1100 1140

* Design B - dimensions depend upon the motor brand. The weight of the pump in design A will be app. 4 kg less.

Sterling Fluid Systems Pumping Technology AKH-00 / 2003

Page 10 / 20

Dimension chart, Pump set drawing and Performance curves


AKH 6100 in cast iron (0A, 0B, 0F, 2H)

H (m) 120 100 80 60 40 20 0 P (kW) 20 16 12 8 4 0 NPSH (m) 6 4 2 15

61

03

1450 rpm

w 188 a 251 65 4

610

6101

65

G m2

m1

f1 v
6103

e1 w1
18x4 185 145

6102

6101

150

28j5

DN65

150
15

20

30,9 h3 50 c d

20

25

30

Q 35 (m3/h)

200 250

e2 b2

General: Characteristic tolerances:

Values are valid for water = 1 kg/dm3 and = 1 cSt. Capacity 5% - Delivery head 5% - Power + 10%. For designs with a mechanical seal or casing seal of soft Teflon, the tolerance for the delivery head is extended by 2% each.

Pump Motor Base Coupling Weight size kW size plate pump set 5.5 132S P015 152 6101 B95 54 7.5 132M 161 11 160M P385 B95 272 6102 65 15 160L B110 293 B110 317 6103 18.5 180M P436 76 22 180L B125 337 * Dimensions depend upon the motor brand.

a 190 280 370

b2

e1

e2 325 440 490

v 160 200 215

361 25 15 600 490 30 24 740 540 30 24 840

f1 h3 m 1 m 2 w * 63 200 276 220 1102 1128 1310 63 240 366 310 1372 63 260 456 400 1524

w1 920 1140 1270

Sterling Fluid Systems Pumping Technology AKH-00 / 2003

Page 11 / 20

Dimensiom chart, Pump set drawing and Performance curves


AKH 1200 in Bronze and Stainless steel (3B, 4B and 4F)

H (m) 100 80 60 40 20 0 P (kW) 1,6 1,2 0,8 0,4 0 NPSH (m) 3 2 1

120

1450 rpm
4

w 124 a 150 25 4

120

1202

1201

50 m2 f1 v

G m1

e1 w1

1204
1203
1202

14x4 115 85

1201

100

11j5

DN25

90
13

11

12,6 h3 36 c d

0,5

1,0

1,5

2,0

Q (m3/h)

2,5 120 156

e2 b2

General: Characteristic tolerances:

Values are valid for water = 1 kg/dm3 and = 1 cSt. Capacity 5% - Delivery head 5% - Power + 10%. For designs with a mechanical seal or casing seal of soft Teflon, the tolerance for the delivery head is extended by 2% each.

Pump Motor size kW size 0.37 71 1201 0.55 80 0.55 80 1202 0.75 80 0.75 80 1203 1.1 90S 1.1 90S 1204 1.5 90L

Base Coupling Weight plate pump set P007 36 B68 15 P008 42 43 P008 B68 16 44 P008 46 B68 18 P241 54 56 P241 B68 20 60

a 120 120 154 188

b2 317 297 297 297 330 330

e1 350 20 15 400 20 15 400 20 15 400 25 19 480 25 19 480

e2 285 265 265 265 290 290

v 110 120 120 120 125 125

h3 m 1 m 2 125 87 256 214 130 87 130 256 214 130 87 290 248 155 87 155 324 282

f1

w* 637 671 671 705 763 797

w1 570 640 640 640 730 730

* Design B - dimensions depend on the motor brand. The weight of the pump in design A (only available in Stainless steel) will be approximately 1 kg less.

Sterling Fluid Systems Pumping Technology AKH-00 / 2003

Page 12 / 20

Dimensiom chart, Pump set drawing and Performance curves


AKH 3100 in Bronze and Stainless steel (3B, 4B and 4F)

H 140 (m) 120 100 80 60 40 20 0 P (kW) 3 2 1 0 NPSH (m) 2 1 1

31

04

1450 rpm

146

w 189 40 4

310

3102

3101

55 m2 f1 v
3104

G m1

e1 w1
18x4

3103

3102
3101

140 100

118

16j5

DN32

112
13

15

18,1 36 c h3 d

Q (m3/h)

160 196

e2 b2

General: Characteristic tolerances:

Values are valid for water = 1 kg/dm3 and = 1 cSt. Capacity 5% - Delivery head 5% - Power + 10%. For designs with a mechanical seal or casing seal of soft Teflon, the tolerance for the delivery head is extended by 2% each.

Pump Motor Base Coupling Weight size kW size plate pump set 80 58 3101 0.75 P241 B68 26 1.1 90S 62 1.1 90S 63 P241 B68 3102 1.5 90L 27 67 2.2 100L P272 B80 78 2.2 100L 82 3103 P272 B80 31 3 100L 83 2.2 100L 96 P272 3104 3 100L B80 34 97 4 112M P015 109

a 150 150 190 230

b2

e1

e2 290 290 320 320 320 325

v 125 125 140 140 140 160

f1

h3

m1 m2

330 25 19 480 330 360 25 19 480 540

99 177 308 268 99 177 308 268 99 177 348 308 99 177 162 388 348

w* 762 820 820 861 901 941 962

w1 730 730 820 820 820 920

360 25 19 540 360 361 25 19 540 15 600

* Design B - dimensions depend on the motor brand. The weight of the pump in design A (only available in Stainless steel) will be approximately 2,7 kg less.

Sterling Fluid Systems Pumping Technology AKH-00 / 2003

Page 13 / 20

Dimensiom chart, Pump set drawing and Performance curves


AKH 3600 in Bronze and Stainless steel (3B, 4B and 4F)

H (m) 100 80 60 40 20 0 P (kW) 5 4 3 2 1 0 NPSH (m) 3 2 1

36

w
04

1450 rpm

146

189 40 4

360

3602

3601

55 m2 f1 v

G m1

e1 w1
18x4 140 100

3604 3603 3602 3601

118

16j5

DN32

112
13

15

18,1 h3 36 c d

Q (m3/h)

160 196

e2 b2

General: Characteristic tolerances:

Values are valid for water = 1 kg/dm3 and = 1 cSt. Capacity 5% - Delivery head 5% - Power + 10%. For designs with a mechanical seal or casing seal of soft Teflon, the tolerance for the delivery head is extended by 2% each.

Pump Motor size kW size 0.75 80 3601 1.1 90S 1.5 90L 3602 2.2 100L 2.2 100L 3103 3 100L 4 112M 3 100L 3604 4 112M 5.5 132S

Base Coupling Weight plate pump set 58 P241 B68 26 62 P241 B68 67 27 P272 B80 78 82 P272 B80 31 83 101 87 P272 B80 34 109 P015 B95 131

a 150 150 190

b2 330 360 360 360

e1 480 540

e2 290 290 320 320 320 325

v 125 125 140 140 140 160

f1

h3

m1 m2

330 25 19 480 25 19

99 177 308 268 99 177 308 268 99 177 348 308

w* 762 820 820 861 901

w1 730 730 820 820 820 920

25 19 540 19 540 25 15 600

230

361

922 177 941 99 162 388 348 962 182 1038

* Design B - dimensions depend on the motor brand. The weight of the pump in design A (only available in Stainless steel) will be approximately 2,7 kg less.

Sterling Fluid Systems Pumping Technology AKH-00 / 2003

Page 14 / 20

Dimensiom chart, Pump set drawing and Performance curves


AKH 4100 in Bronze and Stainless steel (3B, 4B and 4F)

H (m) 120 100 80 60 40 20 0 P (kW) 6 4 2 0 NPSH (m) 4 2 0


4102

1450 rpm
41 04
3

149

w 197 45 4

410

4101

55 m2 f1 v

G m1

e1 w1
18x4 150 110

4104

4103

4102
4101

132

19j5

DN40

132
13

20

21,5 47 c

h3 d

10

11

12 Q (m3/h)

160 218

e2 b2

General: Characteristic tolerances:

Values are valid for water = 1 kg/dm3 and = 1 cSt. Capacity 5% - Delivery head 5% - Power + 10%. For designs with a mechanical seal or casing seal of soft Teflon, the tolerance for the delivery head is extended by 2% each.

Pump Motor size kW size 1.5 90L 4101 2.2 100L 2.2 100L 4102 3 100L 4 112M 4 112M 4103 5.5 132S 4 112M 4104 5.5 132S 7.5 132M

Base Coupling Weight plate pump set P241 B68 74 33 P272 B80 85 92 P272 B80 39 93 109 P015 B80 118 44 P017 B95 157 B80 140 P017 50 163 B95 173

a 160 215 270 325

b2 330 360 360 361 361

e1 480 25 19 540 25 19 540 25 15 600 700 25 15 700

e2 290 320 320 325 325

v 125 140 140 160 200 200

f1

h3

m1 m2

92 197 303 263 92 197 358 318

w* 841 882 937

w1 730 820 820 920 1100 1100

958 92 182 413 373 1013 192 1089 1068 92 192 468 428 1144 1170

* Design B - dimensions depend on the motor brand. The weight of the pump in design A (only available in Stainless steel) will be approximately 3,2 kg less.

Sterling Fluid Systems Pumping Technology AKH-00 / 2003

Page 15 / 20

Dimensiom chart, Pump set drawing and Performance curves


AKH 5100 in Bronze and Stainless steel (3B, 4B and 4F)

H (m) 100 80 60 40 20 0 P (kW) 10 8 6 4 2 0 NPSH (m) 4 2 11

510

w 1450 rpm 163 a 217 50 4

5102

5101

55 m2 f1 v

G m1

5103

e1 w1
18x4

5102
5101

165

140

24j5

125

DN50

150
13

20

26,9 h3 47 c d

12

14

16

18

Q 20 (m3/h)

160 218

e2 b2

General: Characteristic tolerances:

Values are valid for water = 1 kg/dm3 and = 1 cSt. Capacity 5% - Delivery head 5% - Power + 10%. For designs with a mechanical seal or casing seal of soft Teflon, the tolerance for the delivery head is extended by 2% each.

Pump Motor size kW size 3 100L 5101 4 112M 5.5 132S 5102 7.5 132M 11 160M 7.5 132M 5103 11 160M 15 160L

Base Coupling Weight plate pump set 98 P272 B80 45 121 168 P017 B95 55 178 P385 262 P017 217 B95 P385 64 271 P436 B110 283

a 175 250 325

b2

e1

e2 320 325 440 325 440 490

v 140 200 200 215

360 25 19 540 361 25 15 700 490 30 24 740 361 25 15 700 490 30 24 740 540 840

99 215 329 293

w* 931 952 1103 210 99 404 368 1129 240 1221 210 1204 99 240 479 443 1296 1358

f1

h3

m1 m2

w1 820 1100 1140 1100 1140 1270

* Design B - dimensions depend upon the motor brand. The weight of the pump in design A (only available in Stainless steel) will be app. 4,2 kg less.

Sterling Fluid Systems Pumping Technology AKH-00 / 2003

Page 16 / 20

Dimensiom chart, Pump set drawing and Performance curves


AKH 6100 in Bronze and Stainless steel (3B, 4B and 4F)

H (m) 120 100 80 60 40 20 0 P (kW) 20 16 12 8 4 0 NPSH (m) 6 4 2 15

610

1450 rpm

w 182 a 251 65 4

610

6101

65 m2 f1 v

G3/8 m1

e1 w1
18x4

6103
6102
185

6101

165

28j5

145

DN65

150
15

20 30,9 h3 50 c d

20

25

30

Q 35 (m3/h)

200 250

e2 b2

General: Characteristic tolerances:

Values are valid for water = 1 kg/dm3 and = 1 cSt. Capacity 5% - Delivery head 5% - Power + 10%. For designs with a mechanical seal or casing seal of soft Teflon, the tolerance for the delivery head is extended by 2% each.

Pump Motor size kW size 5.5 132S 6101 7.5 132M 11 160M 6102 15 160L 18.5 180M 6103 22 180L

Base Coupling Weight plate pump set 175 P017 B95 62 182 P385 B95 282 75 P436 B110 294 342 B110 P487 87 B125 362

a 195 285 375

b2 361 490 540 610

e1

e2 325 440 490 550

25 15 700 30 24 740 840 30 24 940

w* 1101 160 117 210 388 328 1127 200 117 240 478 418 1309 215 1371 240 117 280 568 508 1523

f1

h3

m1 m2

w1 1100 1140 1270 1420

* Dimensions depend upon the motor brand.

Sterling Fluid Systems Pumping Technology AKH-00 / 2003

Page 17 / 20

Notes

It is the policy of Sterling Fluid Systems to seek continually for ways to improve its products and the right is reserved to alter specifications at anytime without prior notice.

Sterling Fluid Systems Pumping Technology AKH-00 / 2003

Page 18 / 20

Sterling SIHI Side Channel pumps


Sterling Fluid Systems offers an extensive Side Channel pump range under its brand name Sterling SIHI. Sterling Fluid Systems has more than 80 years of experience in manufacturing, installation and support of Side Channel pumps. The Sterling SIHI Side Channel pumps can be found in a wide application range for the:

Chemical market Pharmaceutical industry Petrochemical industry Food industry Ship yards LPG industry and many more ...

The Sterling SIHI Side Channel pump range


1000

CEH AEHL
Delivery head (m)

AEH ADHL CDHL

100

AOH

ASH AKH

10

AKL AKV

DRV

AOL

10

20 Capacity (m3/h)

30

40

The benefits of the Sterling SIHI Side Channel pumps

Self priming Gas handling High-resistant materials Performance curve characteristics High efficiency Low NPSHR value Modular hydraulic system

The Sterling SIHI Side Channel pumps comply with the highest demands of our customers and are the best solution for the handling of liquid under critical physical conditions.

Sterling Fluid Systems Pumping Technology AKH-00 / 2003

Page 19 / 20

Sterling Fluid Systems (Europe) www.sterlingfluidsystems.com/europe


Sterling Fluid Systems (Austria) Wien Telephone: +43 (0)1 680 050 Fax: +43 (0)1 680 0521 E-Mail: sales_austria@sterlingsihi.de Sterling Fluid Systems (France) Trappes Telephone: +33 (0)1 34 82 39 00 Fax: +33 (0)1 34 82 39 61 E-Mail: sterlingsihi@easynet.fr Sterling Fluid Systems (Greece) Athens Telephone: +302 (0)10 9570783 Fax: +0302 (0)10 9568121 E-Mail: sales_greece@sterlingsihi.de Sterling Fluid Systems (Netherlands) Beverwijk Telephone: +31 (0)251 263 232 Fax: +31 (0)251 226 309 E-Mail: info@sihi.nl Sterling Fluid Systems (Schweiz) Schaffhausen Telephone: +41 (0)52 6440606 Fax: +41 (0)52 6440616 E-Mail: info@sterlingfluid.ch Sterling Fluid Systems (Belgium) Groot-Bijgaarden Telephone: +32 (0)2 481 7711 Fax: +32 (0)2 481 7737 E-Mail: sales@sterlingfluidsystems.be Sterling SIHI (Germany) Itzehoe Telephone: 49 (0)4821 77101 Fax: 49 (0)4821 771274 E-Mail: sales@sterlingsihi.de Sterling Fluid Systems (Hungary) Veszprm Telephone: +36 (0)88 40 66 33 Fax: +36 (0)88 40 66 35 E-Mail: sales_hungary@sterlingsihi.de Sterling Fluid Systems (Polska) Warszawa Telephone: +48 (0)22 849 7097 Fax: +48 (0)22 849 6726 E-Mail: sterling@sterling.pl Sterling Fluid Systems (Spain) Madrid Telephone: +34 (0)91 709 1310 Fax: +34 (0)91 715 9700 E-Mail: mibsa@stnet.es Sterling Fluid Systems (Chech Republic) Olomouc Telephone: +420 (0)587 433 651 Fax: +420 (0)587 433 653 E-Mail: sterling@sterling.cz Sterling Fluid Systems (Italy) Monza Telephone: +39 (0)039 2824 1 Fax: +39 (0)039 2824 220 E-Mail: sterlingitaly@sidro.it Sterling Fluid Systems (Romania) Bucuresti Telephone: +40 (0)21 610 7188 Fax: +40 (0)21 210 8287 E-Mail: sales_romania@sterlingsihi.de Sterling SAT Dgeling, Germany Telephone: +49 (0)4821 9000-0 Fax: +49 (0)4821 9000-501 E-Mail: sat@sterlingsat.com Sterling Fluid Systems (UK) Altrincham/Cheshire Telephone: +44 (0)161 9286371 Fax: +44 (0)161 9252129 E-Mail: uksales@sterlingfluid.com

Sterling Fluid Systems (Americas) www.sterlingfluidsystems.com/americas


Sterling Fluid Systems (USA) Grand Island Telephone: (1) 716 773 6450 Fax: (1) 716 773 2330 E-Mail: mail@sihi.com Sterling Fluid Systems (Canada) Guelph Telephone: (1) 519 824 4600 Fax: (1) 519 824 7250 E-Mail: mail@sihi.com

Sterling Fluid Systems (Asia) www.sterlingfluidsystems.com/asia


Sterling Fluid Systems (Asia) Singapore Telephone: (65) 68630 828 Fax: (65) 68630 868 E-Mail: asia.marketing@sterlingasia.com.sg Sterling Fluid Systems (Malaysia) Selangor Darul Ehsan Telephone: (60) 3 8070 0198/99 Fax: (60) 3 8070 0240 E-Mail: sfsmsia@tm.net.my SIHI (Australia) Bayswater Telephone: (61) 3 9720 1500 Fax: (61) 3 9720 4076 E-Mail: sfsaus@ozemail.com.au Sterling Fluid Systems (Philippines) Muntinlupa City Telephone: (63) 2 809 4908 Fax: (63) 2 807 2013 E-Mail: asia.marketing@sterlingasia.com.sg Sterling Fluid Systems (China) Shanghai Telephone: (8621) 6336 3488/6326 4171/6326 4062 Fax: (8621) 63268487 E-Mail: asia.marketing@sterlingasia.com.sg Sterling Fluid Systems (Thailand) Bangkok Telephone: (66) 2 319 2567 Fax: (66) 2 319 25673/4 E-Mail: sfsthai@sterlingthai.co.th

www.sterlingfluidsystems.com

You might also like