Professional Documents
Culture Documents
Apollo Valves
How to Order Apollo Valves Bronze Ball Valves Two Piece Ball Valves Three Piece Ball Valves Three Way Valves Union End Valves Steam Prep Ball Valves ANSI Flanged Ball Valves Specialty Ball Valves Top Entry Valves Optional Configurations Engineering Data
00 - 000 - 00
MATERIALS OR STYLE
70 71 72 73 73A 74 75 76 76F 77 77C 78 79 7A 7K 80 81 82 83 83R 85 85R 86 86R 87 87A 87A-400 88 88A 89 9A 90 91 92 93 95 96 399 401 Bronze Bronze with pads Carbon Steel, High Pressure Carbon Steel A105 Carbon Steel Nickel Pad-Locking Bronze CF8M Stainless Steel CF8M Stainless Steel, Full Port Bronze Full Port Bronze Full Port Economy Special Valves Refrigerant Valves Chlorine Carbon Steel Bronze Full Port Drain Bronze, UL Listed Bronze UL Listed Plain Ball Bronze 3-Piece Full Port CS 3-Piece CS 3-Piece, Actuator Ready SS 3-Piece, Reg.Port SS 3-Piece, Reg.Port, Actuator Ready SS 3-Piece, Full Port SS 3-Piece, Full Port, Actuator Ready CF8M SS Flanged CF8M SS Flanged Alloy-20 Flanged Carbon Steel Flanged Carbon Steel Flanged Cast Carbon Steel w/Pads Bronze, Hvy.Patt. Unibody Bronze, Unibody, UL Listed Bronze, Unibody Cast Carbon Steel Unibody CS Unibody Bronze Stop & Drain CF8M SS Unibody Alloy-20 NPT Alloy-20, 3-Piece, Full Port
TYPE
1 NPT Female/150 Flange 2 Solder & Soc. Weld/150 Flange Full Port 3 Union End NPT/Reg.Port Soc.Weld 4 Union End Solder/Reg.Port Soc.Weld 5 Spring Return/High Pressure Full Port NPT 6 3-way, NPT/High Pressure Soc.Weld Full Port 7 Butt Weld/300 Flange 8 Male x Female, NPT/600 Flange 9 3-way Solder/O-Ring Boss/300 Flange Full Port
VARIATIONS
1 One Size Larger Male Retainer 2 Adjustable Stop Lever 3 Cu-Ni Ball & Stem 4 SS Sall & Stem 5 Original Balancing StopAttach to Lever or T-Handle 7 One Size Smaller Female Retainer 8 (Not Assigned) 9 Pinned Retainer
SIZE
1 2 3 4 5 6 7 8 9 0 A C E G H 1/4" 3/8" " 3/4" 1" 1 1/4" 1 " 2" 2 " 3" 4" 6" 8" 10" 12"
DESIGN
-01 -02 -03 -04 -05 -06 -07 -08 -09 -10 -12 -13 -14 -15 -16 -17 -21 -22 -23 -24 -25 -26 -27 -28 -29 -30 -31 -32 -33 -34 -35 -36 -38 -39 -40 -41 -42 -43 -44 -45 Standard Stem Grounded 1-1/4" Carbon Steel Ext.Stem 2-1/4" Carbon Steel Ext.Stem Plain Ball 2000 lb. 73-100 Series (1-1/4" to 2") Steel Tee Handle 90 degree reversed stem SS Lever SS Lever & Nut Stamp 157 SWP & Bagged Stamp 157 SWP Side Vented Ball (uni-directional) Wheel Handle, Steel Chain Lever, Vertical Rough Chrome Plate - Bronze Valves UHMWPE Trim (non-PTFE) Viton Union Seals Tank Flange (2" 3-pc valves only) Graphite Packing Graphite Packing, Vented Ball & Tack Welded Ret. Chevron Pkg Vent Assd.Dry Monel Trim (7A) SS Latch Lock Lever & Nut Actuator Mounting Pad Not Drilled/Tapped Graphite Packing & Seals Cam-Lock and Grounded Stem 7B Series w/Boss not Drilled/Tapped SS Hi-Rise Tee Handle & Nut 76-300 Series w/Pad Drilled/Tapped Nylatron Seats (96 Series) VTFE Trim SS HiRise Round Handle, SS Nut Peek Seats & Bearing (Graphite packing & seals) SS Hi-Rise Locking Wheel Handle, SS Nut Cyl-loc and Grounded Stem Auto.Drain (Bronze Valves Only) Non-Vented Ball, No Holes in Slot (CS and SS) Cyl-Loc, Grnd B&S, 680 LocTite or 2-Tack Welds Seal Weld 76-100 & 89-100 Less Lever & Nut -46 -47 -48 -49 -50 -51 -52 -53 -54 -56 -57 -58 -59 -60 -61 -62 -63 -64 -65 -66 -68 -69 -70 -72 -73 -74 -75 -76 -77 -78 -79 -80 -97 -98 -SW -MG -MH -MJ -MK -P01 -BC T01 SS Latch Lock Lever, Lock in Closed Position Only SS Oval Latch Lock Handle, SS Nut SS Oval Handle, No Latch, SS Nut Assembled Dry 2-1/4" CS Locking Stem Extension One Tack Weld (I-7362-05-1X) Two Tack Weld (I-7362-05-2X) Three Tack Weld (I-7362-05-3X) Four Tack Weld (I-7362-05-4X) MultiFill Seats and Packing Oxygen Cleaned (Bro nze and SS Only) Chain Lever, Horizontal SS External Trim 3-pc Valves Grounded Ball & Stem Grounded Ball & Stem, Assembled Dry Body Centre Section NPT x Solder/Socket Weld 250 lb. Steam Trim MultiFill Seats & Graphite Packing FNPT x Butt Weld 4" Stem Extension (3" & 4" 3-pc. 82 Series Purge Ports Drilled/Tapped @ Bottom & approx. 45" from Top 4" Extended Bonnet RTFE Packing TFE Packing - Spiral Wound Body Seals - TFE Fillers - Flange BV Graphite Packing - Spiral Wound Body Seals - Graphoil Fillers - Flange BV MPTFE Seats, PTFE Packing, RPTFE Gaskets Live Loaded 87A/88A Series (Lever) Live Loaded 87A/88A Series (Gear & Actuated) Delrin Seats Nylon Seats/Graphite Packing 72 Series Multi-Seal (Super TFE) 87A/88A Series Grnd.Whl.Handle, Pinned or Tack Welded Grnd.Whl. Pinned or Tack Welded & 1-1/4" Stem Ext. Limit Switch Mounted Gear Operated, Std. Hand Wheel Gear Operated, Std. Hand Wheel, Lockout Device Gear Operated, Oversize Hand Wheel Gear Operated, Oversize Hand Wheel, Lockout Device BSPP (Parallel) Thread Connection Ball Check BSPT (Tapered) Thread Connection
Ball Valves
Get solid full-port performance at an affordable price with the American-made Apollo 77C.
Machined solid chrome-plated ball Multi-fill PTFE seats and seals Adjustable packing Blow-out proof stem design American-made bronze castings Vacuum service to 29 in. Hg Full-port design through 2 Available with stainless steel ball and stem as 77C-140 Series ANSI B16.18 solder end version available as 77C-200 Series
Model Number 77C-101 77C-102 77C-103 77C-104 77C-105 77C-106 77C-107 77C-108 77C-202 77C-203 77C-204 77C-205 77C-206 77C-207 77C-208
Size (In.) 1/4 3/8 1/2 3/4 1 1-1/4 1-1/2 2 3/8 1/2 3/4 1 1-1/4 1-1/2 2
A 0.37 0.37 0.50 0.75 1.00 1.25 1.50 2.00 0.37 0.50 0.75 1.00 1.25 1.50 2.00
B 0.95 1.07 1.15 1.32 1.53 2.04 2.21 2.76 0.93 1.15 1.39 1.69 2.08 2.33 2.95
C 1.97 2.09 2.25 2.65 3.07 4.08 4.43 5.29 1.84 2.31 2.79 3.38 4.16 4.66 5.84
D 1.76 1.76 1.79 2.00 2.19 3.13 3.29 3.83 1.76 1.79 2.00 2.19 3.13 3.29 3.83
Dimensions (In.) E F G H 3.74 1.86 4.06 1.41 3.74 1.86 4.06 1.41 3.74 1.89 4.06 1.44 4.88 2.20 5.03 1.76 4.88 2.39 5.03 1.96 7.06 3.76 7.19 2.82 7.06 3.92 7.19 2.98 7.06 4.46 7.19 3.52 3.74 3.74 4.88 4.88 7.06 7.06 7.06 1.86 1.89 2.20 2.39 3.76 3.92 4.46 4.06 4.06 5.03 5.03 7.19 7.19 7.19 1.41 1.44 1.76 1.96 2.82 2.98 3.52
I 3.50 3.50 3.50 4.00 4.00 6.00 6.00 6.00 3.50 3.50 4.00 4.00 6.00 6.00 6.00
Wt. M Cv (Lbs) -01 3.86 4.5 0.6 3.86 7.2 0.6 3.89 15.5 0.6 4.10 35.6 1.1 4.29 68.1 1.8 5.23 125.0 4.4 5.39 177.0 5.9 5.93 389.0 11.4 3.86 7.2 0.6 3.89 15.5 0.6 4.10 35.6 1.0 4.29 68.1 1.6 5.23 125.0 3.9 5.39 177.0 5.8 5.93 389.0 10.2
77C-100
77C-200
4
Customer Service 1-704-841-6000
Ball Valves
32-200-01
Dimensions (In.) C D 2.65 1.68 3.56 1.90 4.26 2.18 4.60 2.53 5.42 2.69 6.48 2.94
Ball Valves
A 0.37 0.37 0.50 0.68 0.87 1.00 1.25 1.50 2.00 2.50 3.12
C 2.06 2.06 2.25 3.00 3.37 4.00 4.37 4.68 6.25 6.75 7.37
*Body only. Total will vary with handle and end connection options. Contact Conbraco Customer Service for these dimensions. All 70-100 Series valves are available in sizes 1/4" through 4". High capacity water valve, formerly 78-255-01
70-100-03/04
6
Customer Service 1-704-841-6000
Ball Valves
70-100-07
70-100-08
70-100-17
70-100-27
70-100-41
70-100-30
70-100-63
RPTFE seats and stuffing box ring Rated 600 psig WOG, cold, non-shock
Ball Valves
70-200-01
Model Number 70-202 70-203 70-204 70-205 70-206 70-207 70-208 70-209 70-200
Dimensions (In.) C D E 2.56 1.75 3.87 2.87 1.75 3.87 3.87 2.12 4.87 4.50 2.25 4.87 4.62 2.62 5.50 5.25 3.06 8.00 6.37 3.25 8.00 7.51 3.72 8.00 8.25 4.12 8.00
*Based on 70-200-01 Dimensions may vary with options. Contact Conbraco customer service for dimensions on 70-200-63.
70-300-01
8
Customer Service 1-704-841-6000
Ball Valves
70-800-01
Dimensions (In.) C D 2.43 1.75 2.50 1.75 2.81 1.81 3.50 2.12 4.00 2.25 4.31 2.62 5.18 3.06
B C
5-Port Valves
78-124-01 & 78-125-01A
5-Port Tank Selector Ball Valve
Perfect for fuel tank selection on large marine vessels, or in any application requiring control of multiple media through a single valve. Five-port construction allows access to four different tanks using only one valve. Unique ball design allows for higher flow capacities. Designed for easy installation and mounting. Bronze with stainless steel lever and nut 50 psig pressure rating Pointer on handle indicates selected inlet
A 0.50 0.75
B 1.26 1.53
Dimensions (In.) C D E F G H 2.52 2.27 3.53 1.12 10-24 1.40 3.12 2.87 3.87 1.53 1/4-20 1.98
Ball Valves
Diverter Valves
70-600-01
Threaded 3-Way Ball Valve
Ideal for applications requiring flow diversion, this valve combines the features of two 2-way valves. Its large ports make tank selection and fluid transfers simpler. Easy quarter-turn operation. 400 psig WOG rating 100 percent air tested under water
Model Size Number (In.) 70-601-01 1/4 70-602-01 3/8 70-603-01 1/2 70-604-01 3/4 70-605-01 1 70-606-01 1-1/4 70-607-01 1-1/2 70-608-01 2
Dimensions (In.) C D E F 2.32 1.80 3.88 1.18 2.32 1.80 3.88 1.18 2.25 1.75 3.87 1.18 3.00 2.12 4.87 1.62 3.18 2.25 4.87 1.71 3.95 2.69 5.50 2.01 4.40 2.87 5.50 2.38 4.69 3.00 5.50 2.50
70-900-01
10
Customer Service 1-704-841-6000
Ball Valves
Dimensions (In.) C D E F 2.06 1.37 2.68 0.93 2.06 1.37 2.68 0.93 2.18 1.43 2.68 1.00 2.68 1.62 3.00 1.12 3.43 1.90 4.00 1.31 3.87 2.18 4.00 1.62 4.22 2.60 5.62 1.81 5.02 2.95 5.62 2.18
H 1/8 NPT 1/8 NPT 1/8 NPT 1/8 NPT 1/8 NPT 1/4 NPT 1/4 NPT 1/4 NPT
7B-300-01
Full Port Hydro Valve With Two Female NPT Ports And Single Union End
Valve offers union ends to make assembly and disassembly easier. Rated 400 psig WOG, cold, non-shock, it is equipped with a rugged chromium-plated ball and PTFE seats and stuffing box ring. Stem designed to be blowout-proof Full flow, minimum pressure drop Model Size Number (In.) 7B-301-01 1/4 7B-303-01 1/2 7B-304-01 3/4 7B-305-01 1 7B-307-01 1-1/2 7B-308-01 2 Dimensions (In.) C D E F 2.92 1.37 2.68 0.93 3.08 1.43 2.68 0.93 3.67 1.62 3.00 1.12 4.50 1.90 4.00 1.31 5.62 2.60 5.62 1.81 6.56 2.95 5.62 2.18
H 1/8 NPT 1/8 NPT 1/8 NPT 1/8 NPT 1/4 NPT 1/4 NPT
7B-800-01
H 1/8 NPT 1/8 NPT 1/8 NPT 1/8 NPT 1/8 NPT 1/4 NPT 1/4 NPT 1/4 NPT
11
Ball Valves
77-100-01
Model Number 77-101-01 77-102-01 77-103-01 77-104-01 77-105-01 77-106-01 77-107-01 77-108-01 77-109-01
Dimensions (In.) D 1.81 1.81 1.81 2.12 2.62 2.87 3.34 3.71 4.12
77-900-01
Model Nom. Tube Number O.D. (In.) 77-901-01 1/4 77-902-01 3/8 77-903-01 1/2 77-904-01 3/4 77-905-01 1 77-906-01 1-1/4 77-907-01 1-1/2 77-908-01 2
Size (In.) 7/16-20 9/16-18 3/4-16 11/16-12 15/16-12 1-5/8-12 1-7/8-12 2-1/2-12
Dimensions (In.) C D E 2.25 1.81 3.87 2.25 1.81 3.87 2.25 1.81 3.87 3.12 2.12 4.87 3.62 2.62 5.50 4.25 2.87 5.50 4.75 3.34 8.00 5.37 3.71 8.00
12
Customer Service 1-704-841-6000
Ball Valves
Steam Valves
71-140-64
250 Lb. Steam Valve With Mounting Pad
Designed for reliable operation on high pressure steam systems and with fluids of widely varying temperatures. Ideal for use with high thermal expansion rates. Stainless steel ball and stem standard. Ball has a thermal relief hole drilled into stem slot. Multi-filled RPTFE seats Special high-temperature MTFE stem packing Model Size Number (In.) 71-144-64 3/4 71-145-64 1 71-146-64 1-1/4 71-147-64 1-1/2 71-148-64 2 71-140-64 3 A 0.68 0.87 1.00 1.25 1.50 2.50 B 1.50 1.68 2.00 2.18 2.34 3.37 Dimensions (In.) C D E F 3.00 2.12 4.87 0.87 3.37 2.25 4.87 0.87 4.00 2.62 5.50 0.93 4.37 2.87 8.00 0.93 4.68 3.06 8.00 0.93 6.75 4.12 8.00 N/A G 1.37 1.37 1.50 1.50 1.50 2.75 H 10-24 NC 10-24 NC 1/4-20 NC 1/4-20 NC 1/4-20 NC 1/4-20 NC
13
Ball Valves
Hydronic Valves
70-120-01
Ball Valve With Adjustable Stop Lever
This versatile hydronic valve provides easy screw controlled incremental balancing adjustments when variation is needed. Special design makes a model combination shut-off and balancing valve. Model Number 70-121-01 70-122-01 70-123-01 70-124-01 70-125-01 70-126-01 70-127-01 70-128-01 70-129-01 70-120-01 Size (In.) 1/4 3/8 1/2 3/4 1 1-1/4 1-1/2 2 2-1/2 3 Dimensions (In.) B C D 1.03 2.06 1.75 1.03 2.06 1.75 1.12 2.25 1.75 1.50 3.00 2.12 1.68 3.37 2.25 2.00 4.00 2.62 2.18 4.37 3.06 2.34 4.68 3.25 3.25 6.50 4.12 3.37 6.75 4.12
A 0.37 0.37 0.50 0.68 0.87 1.00 1.25 1.50 2.50 2.50
E 3.87 3.87 3.87 4.87 4.87 5.56 5.56 5.56 5.56 5.56
70-120-04
14
Customer Service 1-704-841-6000
Ball Valves
70-150-01
70-200-C8
Model Number 70-203-C8 70-204-C8 70-205-C8 70-206-C8 70-207-C8 70-208-C8 70-209-C8A 70-200-C8
Dimensions (In.) C D E F 2.87 1.75 3.87 0.63 3.87 2.12 4.87 0.88 4.50 2.25 4.87 1.13 4.62 2.62 5.50 1.38 5.25 3.06 8.00 1.63 6.37 3.25 8.00 2.13 7.51 3.75 8.00 2.63 8.25 4.12 8.00 3.13
77-200-C8
15
Ball Valves
70-200-63
78-100-01
Cap And Chain Valve With Threaded x 3/4 Inch Hose Connection
Ideally suited for direct connections to hoses, valve features a securely attached cover with chain which prevents damage to hose threads. -200 model designed for soft soldering into lines without disassembly. Features chromiumplated ball, blowout-proof stem design and RPTFE seats and stuffing box ring. Adjustable packing gland New pressure-containing version available
Size (In.) 1/2 NPT x 3/4 Hose 3/4 NPT x 3/4 Hose 1/2 Solder x 3/4 Hose 3/4 Solder x 3/4 Hose
Dimensions (In.) B C D E 1.68 2.81 2.95 3.87 1.96 3.50 3.65 4.87 1.65 3.07 3.22 3.87 1.93 3.85 4.00 4.87
16
Customer Service 1-704-841-6000
Ball Valves
78-664-01
95-200-01
17
Ball Valves
Instrumentation Valves
78-250/260
Brass And Bronze Instrumentation Ball Valve
Male x Female Threaded. 400 psig WOG, Cold Non Shock. Air & Liquid Service Rating. Micro-finish ball Blow-out-proof stem design PTFE seats Nitrile stem seal Plated steel tee handle Compact design Optional mixed end fittings available
78-250: Bronze
BRASS INSTRUMENTATION BALL VALVE- Tee Handle Model Size Dimensions (In.) Number (In.) A B C D E Cv* Wt. 78-260-05 1/8M X 1/8F 0.21 0.37 1.43 0.87 1.25 4.00 0.20 78-261-05 1/4M X 1/4F 0.31 0.43 1.43 0.87 1.25 5.50 0.19
78-260: Brass
BRASS INSTRUMENTATION BALL VALVE - Screw Slot Model Size Dimensions (In.) Number (In.) A B C D E Cv* 1/8M X 1/8F 0.21 0.37 1.43 0.75 N/A 4.00 78-262-05 78-263-05 1/4M X 1/4F 0.31 0.43 1.43 0.75 N/A 5.50 BRONZE INSTRUMENTATION BALL VALVE - Screw Slot Model Size Dimensions (In.) Number (In.) A B C D E Cv* 1/8M X 1/4F 0.21 0.80 1.60 0.72 N/A 4.00 78-257-01 78-258-01 1/4M X 1/4F 0.31 0.80 1.60 0.72 N/A 5.50 BRONZE INSTRUMENTATION BALL VALVE - Lever Handle Model Size Dimensions (In.) Number (In.) A B C D E Cv* 1/4M X 1/4F 0.25 0.65 1.45 0.93 1.37 5.50 78-267-01 Wt. 0.20 0.19
Wt. 0.20
*The Cv factor is the gallons of water per minute that the valve will pass with a 1 psig pressure drop.
Irrigation Valves
78-620-01
Threaded Irrigation Valve
Ideal for underground use or where drained media will not cause damage. Auto-drain feature is standard. Features a stainless steel cover, chromium-plated ball, adjustable packing gland, RPTFE seats and seals and blowout-proof stem design. Rated 200 psig water, cold, non-shock Temperature range: +50F to 200F
Dimensions (In.) B C D 1.47 2.96 2.40 1.66 3.34 2.53 1.98 3.97 3.00 2.12 4.28 3.18 2.35 4.67 3.37
18
Customer Service 1-704-841-6000
Ball Valves
78-130
78-114-01
Refrigerant Valves
79-700-01
UL-Listed Refrigerant Ball Valve Assembly
Built for easy installation and long service life. Complete hermetically welded assembly includes copper extensions and forged brass refrigerant ball valve with capped, triple-sealed stem to reduce leaks. Sizes from 3/8" to 3-1/8" O.D. Tube. Chrome plated ball; RPTFE seats and seals. Full-port through 2-58" Bi-directional flow design All sizes UL listed
Model Number 79-701-01 79-702-01 79-703-01 79-704-01 79-705-01 79-706-01 79-707-01 79-708-01 79-709-01 79-600-01
Size (In.) 3/8 1/2 5/8 7/8 1-1/8 1-3/8 1-5/8 2-1/8 2-5/8 3-1/8
Dimensions (In.) A B C D 3.38 6.45 0.45 1.56 3.38 6.45 0.45 1.56 3.56 6.82 0.50 1.56 3.91 7.53 0.68 1.79 4.39 8.51 0.87 1.98 4.42 8.94 1.25 2.62 4.55 9.19 1.25 2.62 5.16 10.31 1.50 2.93 6.50 13.00 2.50 3.90 7.00 14.00 2.50 3.90
E 0.38 0.38 0.50 0.75 0.90 0.96 1.09 1.34 1.48 1.67
F 0.38 0.50 0.62 0.87 1.12 1.38 1.62 2.12 2.62 3.12
Cv* 8.5 8.5 9.8 32.0 44.0 66.0 148.0 218.0 440.0 390.0
*The Cv factor is the gallons of water per minute that the valve will pass with 1 psig pressure drop.
19
Ball Valves
Model Number 7K-101-01 7K-102-01 7K-103-01 7K-104-01 7K-105-01 7K-106-01 7K-107-01 7K-108-01 7K-109-01
Dimensions (In.) E F G 3.87 N/A N/A 3.87 N/A N/A 3.87 N/A N/A 4.78 0.87 1.37 5.50 0.93 1.50 5.50 0.93 1.50 7.78 2.08 3.06 7.78 2.41 3.52 7.78 2.75 3.37
20
Customer Service 1-704-841-6000
Ball Valves
78-256-01
Dimensions (In.) C D E 2.25 1.78 3.87 2.25 1.78 3.87 2.25 1.78 3.87 3.00 2.12 4.87
* Capacity based on a gas having a heating value of 1000 Btu/cubic feet and an S.G. of 0.64 at a P of 1 W.C. .D.
F B
A D
Dimensions (In.) C D E 0.38 3.85 2.24 0.50 3.85 2.30 0.69 4.75 2.85 0.88 4.75 3.10
21
Ball Valves
GB-12
Part Number 51GC2T1 51GC3T1 51GC4T1 51GC5T1 51GD2T1 51GD3T1 51GD4T1 51GE2T1 51GE3T1 51GF201 51GF301 51GF401 51GG201 51GG301
Size & End Connection (In.) 3/8 FNPT x FNPT 1/2 FNPT x FNPT 3/4 FNPT x FNPT 1 FNPT x FNPT 1/2 x 3/8 FNPT x Flare 1/2 x 1/2 FNPT x Flare 3/4 x 5/8 FNPT x Flare 3/8 x 3/8 Flare x Flare 1/2 x 1/2 Flare x Flare 3/8 FNPT x 3/8 FNPT 1/2 FNPT x 1/2 FNPT 3/4 FNPT x 3/4 FNPT 1/2 FNPT x 3/8 Flare 1/2 FNPT x 1/2 Flare
GB-13
GB-14
GB-15
GB-16
22
Customer Service 1-704-841-6000
Ball Valves
GB-12
H D
GB-13
H
Size (In.) GB-12 3/8 1/2 3/4 1 GB-13 1/2 x 3/8 1/2 x 1/2 3/4 x 5/8 GB-14 3/8 1/2 UNIBODY Size GB-15 3/8 1/2 3/4 GB-16 1/2 x 3/8 1/2 x 1/2
D
End Connection FNPT x FNPT FNPT x FNPT FNPT x FNPT FNPT x FNPT FNPT x Flare FNPT x Flare FNPT x Flare Flare x Flare Flare x Flare End Connection FNPT x FNPT FNPT x FNPT FNPT x FNPT FNPT x Flare FNPT x Flare
L 1.81 2.16 2.44 2.87 2.44 2.51 3.03 2.51 2.63 L 1.95 2.28 2.58 2.48 2.48
L2
Dimensions (In.) H D 1.29 1.29 1.41 1.57 1.29 1.29 1.41 1.29 1.29 D 0.31 0.39 0.50 0.39 0.39 0.39 0.39 0.59 0.78 0.39 0.39 0.59 0.39 0.39 W 1.42 1.42 1.42 1.42 1.42
1.77 1.77 1.77 2.75 1.77 1.77 1.77 1.77 1.77 H 1.35 1.40 1.51 1.40 1.40
GB-14
H D L
GB-15
GB-16
23
Ball Valves
UL Certifications GB-50
ANSI Z21.15, CGA9.1 CSA 3.88 CR91-002 Number Single Tapped 50GB301 50GB401 50GB501 50GB601 50GB701 50GB801 50GB5A1 50GB6A1 50GB7A1 50GB8A1
Dual Tapped -50GB401A 50GB501A 50GB601A 50GB701A 50GB801A 50GB5A1A 50GB6A1A 50GB7A1A 50GB8A1A
Capacity I BTU/Hr. 693000 2.24 1258000 3.06 3144000 3.24 6441000 3.62 7745000 4.36 14741000 3.06 3144000 3.24 6441000 3.62 7745000 4.36 14741000
*Note: Capacities based on 1000 Btu/cubic feet gas at 0.64 specific gravity, at a P.D. of 1'' W.C.
G D
GB-50A
G I
24
Customer Service 1-704-841-6000
Ball Valves
80-100-01
Model Number 80-101-01 80-102-01 80-103-01 80-104-01 80-105-01 80-106-01 80-107-01 80-108-01 80-109-01 80-100-01
A 0.37 0.37 0.50 0.68 0.87 1.00 1.25 1.50 2.50 2.50
Dimensions (In.) B C D 1.03 2.06 1.75 1.03 2.06 1.75 1.12 2.25 1.81 1.50 3.00 2.12 1.68 3.37 2.25 2.00 4.00 2.62 2.18 4.37 2.87 2.34 4.68 3.06 3.25 6.50 4.12 3.37 6.75 4.12
E 3.87 3.87 3.87 4.87 4.87 5.50 5.50 5.50 8.00 8.00
90-100-01
Dimensions (In.) B C D 1.14 2.15 1.68 1.36 2.61 1.75 1.50 2.90 2.00 1.81 3.50 2.18 2.06 3.79 2.62 2.43 4.42 2.81
25
Ball Valves
Padlocking Valves
75-100-41
Padlocking Ball Valve With Automatic Drain
Meets OSHA standards and provides for easy, safe maintenance of pneumatic tools. Valve can be padlocked OPEN or CLOSED with same hardware. Built with RPTFE seats and stuffing box ring, a blowout-proof stem design, adjustable packing gland and chromium-plated ball. (Also available without drain option. Specify suffix -01). Threaded end connections Rated to 200 psig air or water Temperature range: +50F to 200F
Model Number 75-101-41 75-102-41 75-103-41 75-104-41 75-105-41 75-106-41 75-107-41 75-108-41
Dimensions (In.) B C D 1.12 2.25 1.81 1.12 2.25 1.81 1.12 2.25 1.81 1.68 3.37 2.25 1.68 3.37 2.25 2.00 4.00 2.62 2.16 4.37 2.87 2.34 4.68 3.06
Model Number 82-101-01 82-102-01 82-103-01 82-104-01 82-105-01 82-106-01 82-107-01 82-108-01 82-109-01 82-140-01 82-14A-01
A 0.43 0.50 0.62 0.81 1.00 1.25 1.50 2.00 2.50 3.00 4.00
Dimensions (In.) B C D 1.28 2.56 1.81 1.28 2.56 1.81 1.40 2.81 1.93 1.71 3.43 2.18 1.93 3.87 2.62 2.37 4.75 2.87 2.62 5.25 3.37 3.01 6.03 3.68 3.62 7.25 5.14 4.00 8.00 6.77 5.50 11.00 8.26
E 3.87 3.87 4.87 4.87 5.50 5.50 8.00 8.00 9.75 18.00 18.00
26
Customer Service 1-704-841-6000
Ball Valves
82-100-19
82-100-63
82-140-57
27
Ball Valves
82-200/82-240
Dimensions (In.) Size (In.) A*(In.) B C 1/2 5/8 0.62 0.05 3/4 0.87 0.81 0.07 1 1.12 1.00 0.07 1-1/4 1.37 1.25 0.07 1-1/2 1.62 1.50 0.07 2 2.12 2.00 0.08
82-200-01
Model Number 82-202-01 82-203-01 82-204-01 82-205-01 82-206-01 82-207-01 82-208-01 82-209-01 82-240-01 82-24A-01
A 0.50 0.62 0.81 1.00 1.25 1.50 2.00 2.50 3.00 4.00
B 1.28 1.40 1.71 1.93 2.37 2.60 3.01 3.62 4.00 5.50
Dimensions (In.) C D E 2.56 1.81 3.87 2.81 1.93 4.87 3.43 2.18 4.87 3.87 2.62 5.50 4.75 2.87 5.50 5.25 3.37 8.00 6.03 3.68 8.00 7.25 5.14 9.38 8.00 6.77 18.00 11.00 8.26 18.00
F 0.50 0.63 0.88 1.13 1.38 1.63 2.13 2.63 3.13 4.13
G 0.37 0.50 0.75 0.90 0.96 1.09 1.34 1.47 1.66 2.16
28
Customer Service 1-704-841-6000
Ball Valves
Model Number 9A-101-01 9A-102-01 9A-103-01 9A-104-01 9A-105-01 9A-106-01 9A-107-01 9A-108-01
Dimensions (In.) B C D 1.34 2.59 1.68 1.34 2.59 1.68 1.34 2.59 1.81 1.44 2.84 1.84 1.72 3.28 2.00 1.94 3.84 2.18 2.06 4.00 2.68 2.29 4.56 2.87
91-100-01
Specialty Valves
Dual Wye Auto Drain Ball Valve
Dual action modular valve, ideal for compressor applications where safety exhaust may be needed for two air lines at once.
29
Ball Valves
IBVE-125 Series
Apollo International Epoxy Coated Cast Iron Full Port Class 125 Flanged Ball Valve
BVE-125 Series valves have all the design and construction features of the IBV-125 plus an FDA-approved, heat-fused epoxy coating making them ideal for corrosive water service as well as food contact applications. Maximum operating temperature: 140F. For additional technical information, request #PHBRIRBV brochure
IBVD-125 Series
Apollo International Ductile Iron Full Port Class 125 Flanged Ball Valve
IBVD-125 series valves have the same design and construction features of the IBV-125 series but in ductile iron. Same dimensional data as IBV/IBVE series. Available in sizes 2" through 6".
Dimensions (In.) IBV Model Number 6P-208-01 6P-209-01 6P-200-01 6P-20A-01 6P-20C-01 6P-20E-01 6P-20G-01
A
30
Customer Service 1-704-841-6000
Ball Valves
94 MBV
Size (In.) 1/4 FNPT x 1/8 MNPT 1/4 FNPT x 1/4 MNPT 1/4 FNPT x 1/4 FNPT 1/8 FNPT x 1/8 MNPT 1/8 FNPT x 1/8 FNPT
Dimensions (In.) A B C 1.96 1.25 1.67 2.04 1.15 1.67 1.63 1.28 1.67 1.97 1.20 1.67 1.61 1.23 1.67
Internal Wt. (Lbs.) 0.31 0.19 0.31 0.20 0.31 0.17 0.31 0.16 0.31 0.16
31
Ball Valves
Economy Valves
64 Series
Apollo International Full Port Brass Ball Valves
Economy full-port forged ball valve with maximum flow; ideal choice for all plumbing applications. Lever handle is standard on all sizes. Sizes from 1/4" to 4" Threaded (-100) and solder end (-200) connections Pressure rated to 600 psig WOG; 150 psig steam Temperatures to 366F (185C) Blowout-proof stem Chrome-plated brass ball Secondary O-ring stem seal PTFE seats, thrust bearing and stem packing
64-100 Model Number Size (In.) 64-101-01 1/4 NPT 64-102-01 3/8 NPT 64-103-01 1/2 NPT 64-104-01 3/4 NPT 64-105-01 1 NPT 64-106-01 1-1/4 NPT 64-107-01 1-1/2 NPT 64-108-01 2 NPT 64-109-01 2-1/2 NPT 64-100-01 3 NPT 64-10A-01 4 NPT 64-200 Model Number 64-203-01 64-204-01 64-205-01 64-206-01 64-207-01 64-208-01 64-209-01 64-200-01 64-20A-01
A 0.39 0.39 0.59 0.78 0.98 1.25 1.57 1.96 2.56 3.15 3.94
Dimensions (In.) B 2.02 2.02 2.44 2.71 3.07 3.42 3.89 4.33 5.59 6.45 7.60 Dimensions (In.) B 2.53 2.99 3.58 4.09 4.56 5.43 6.93 8.09 10.25 Stem Extensions 78-1501-01 78-1502-01 78-1503-01 78-1504-01 78-1505-01 -
C 1.75 1.75 1.88 2.28 2.44 3.07 3.34 3.79 5.02 5.45 6.34
D 3.85 3.85 3.85 4.80 4.80 6.02 6.02 6.37 8.07 8.07 10.23
Size (In.) 1/2 3/4 1 1-1/4 1-1/2 2 2-1/2 3 4 Optional Kits Valve Size (In.) 1/4, 3/8 and 1/2 3/4 and 1 1-1/4 and 1-1/2 2 2-1/2 and 3 4
D 3.85 4.80 4.80 6.02 6.02 6.37 8.07 8.07 10.23 Locking Handles 78-1659-01 78-1660-01 78-1661-01 78-1662-01 -
Cv" 19 34 50 104 268 309 629 1018 1622 Lever Handles 78-1646-01* 78-1647-01 78-1648-01 78-1649-01 78-1650-01 78-1651-01
Note: Specify -07 suffix for T handle, ie. 64-105-07. Available with threaded models only in 1/4-1 sizes. * Lever handle available on 1/2" - 4".
95A Series
Apollo International Full Port Brass Ball Valve With Stop & Waste
32
Customer Service 1-704-841-6000
PAGE
A-1 A-2 A-3 A-4 A-5 A-6 A-7 A-8 A-9 A-10 A-11 A-12 A-13 A-14 A-15 A-16 A-17 A-18
Threaded, 600 psig WOG, Cold Non-Shock. 150 psig Saturated Steam. Vacuum Service to 29 inches Hg. Federal Specification: WW-V-35C, Type: II, Composition: BZ, Style: 3.
VARIATIONS AVAILABLE:
70-120 Series 70-140 Series 70-150 Series 70-190 Series
OPTIONS AVAILABLE:
(SUFFIX) -02-03-04-05-07-08-10-14-15-16-17-21-24-27-30-32-35-39-40-41-45-46-47-48-49-50-56-57-58-60-63-64-P01-T01OPTION Static Grounded 1-1/4" Stem Extension 2-1/4" Stem Extension Plain Ball Tee Handle 90 Reversed Stem SS Lever & Nut Vented Ball (see page J-2) Round Handle Vertical Chain Lever Rough Chrome Plating UHMWPE Seats (Non-PTFE) Graphite Stem Packing Latch Lock Lever CamLock Handle SS Tee Handle & Nut PTFE Trim SS Latch Lock Wheel Handle Cyl-Loc Auto Drain (See page J-8) Less Lever & Nut Latch Lock Lever - Lock Close Only SS Latch-Lock Oval Handle SS Oval Handle Assembled Dry 2-1/4" Locking Stem Extension Multifill Seats Cleaned for Gaseous Oxygen Horizontal Chain Lever Static Grounded Ball & Stem Threaded x Solder 250 Lb. Steam Trim BSPP (Parallel) Thread Connection BSPT (Tapered) Thread Connection SIZES 1/4" to 3" 1/4" to 3" 1/4" to 3" 1/4" to 3" 1/4" to 2" 1/4" to 3" 1/4" to 3" 1/4" to 3" 1/4" to 2" 3/4" to 2" 1/4" to 3" 1/4" to 3" 1/4" to 3" 1/4" to 3" 1/4" to 2" 1/4" to 2" 1/4" to 3" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 3" 1/4" to 3" 1/4" to 1" 1/4" to 2" 1/4" to 3" 1/4" to 3" 1/4" to 3" 1/4" to 3" 3/4" to 2" 1/4" to 3" 3/8" to 3" 1/4" to 3" 1/4" to 3" 1/4" to 3"
1/00
Solder End, 600 psig WOG, Cold Non-Shock. 150 psig Saturated Steam. Vacuum Service to 29 inches Hg. Federal Specification: WW-V-35C, Type: II, Composition: BZ, Style: 3.
FEATURES
Chromium plated ball RPTFE seats and stuffing box ring Blow-out-proof stem design Adjustable packing gland
VARIATIONS AVAILABLE:
70-220 Series (Adjustable Stop Lever) 70-240 Series (316 SS Ball & Stem) 70-250 Series (Balancing Stop)
OPTIONS AVAILABLE:
(SUFFIX) -02-03-04-05-07-08-10-14-15-16-24-27-32-35-39-45-46-47-48-49-50-56-57-58-60-63OPTION Static Grounded 1-1/4" Stem Extension 2-1/4" Stem Extension Plain Ball Tee Handle 90 Reversed Stem SS Lever & Nut Vented Ball (see page J-2) Round Handle Vertical Chain Lever Graphite Stem Packing Latch Lock Lever SS Tee Handle & Nut PTFE Trim SS Latch Lock Wheel Handle Less Lever & Nut Latch Lock Lever - Lock Close Only SS Latch-Lock Oval Handle SS Oval Handle Assembled Dry 2-1/4" Locking Stem Extension Multifill Seats Cleaned for Gaseous Oxygen Horizontal Chain Lever Static Grounded Ball & Stem Threaded x Solder SIZES 3/8" to 3" 3/8" to 3" 3/8" to 3" 3/8" to 3" 3/8" to 2" 3/8" to 3" 3/8" to 3" 3/8" to 3" 3/8" to 2" 3/4" to 2" 3/8" to 3" 3/8" to 3" 3/8" to 2" 3/8" to 3" 3/8" to 2" 3/8" to 3" 3/8" to 3" 3/8" to 1" 3/8" to 2" 3/8" to 3" 3/8" to 3" 3/8" to 3" 3/8" to 3" 3/4" to 2" 3/8" to 3" 3/8" to 3"
The 70-200 is designed to be soft soldered into lines without disassembly. This allows a tested valve to be installed without disturbing the seats and seals in any way. Soldering temperature not to exceed 500F.
A-2
1/00
Male x Female Threaded, 600 psig WOG, Cold Non-Shock. 150 psig Saturated Steam. Vacuum Service to 29 inches Hg. Federal Specification: WW-V-35C, Type: II, Composition: BZ, Style: 3.
FEATURES
Chromium plated ball RPTFE seats and stuffing box ring Male x Female threaded end connections Blow-out-proof stem design Adjustable packing gland
VARIATIONS AVAILABLE:
70-820 Series (Adjustable Stop Lever) 70-840 Series (316 SS Ball & Stem) 70-850 Series (Balancing Stop )
OPTIONS AVAILABLE:
(SUFFIX) -02-03-04-05-07-08-10-14-15-16-21-24-27-30-32-35-39-40-41-45-46-47-48-49-50-56-57-58-60-64OPTION Static Grounded 1-1/4" Stem Extension 2-1/4" Stem Extension Plain Ball Tee Handle 90 Reversed Stem SS Lever & Nut Vented Ball (see page J-2) Round Handle Vertical Chain Lever UHMWPE Seats (Non-PTFE) Graphite Stem Packing Latch Lock Lever CamLock Handle SS Tee Handle & Nut PTFE Trim SS Latch Lock Wheel Handle Cyl-Loc Auto Drain (see page J-8) Less Lever & Nut Latch Lock Lever - Lock Close Only SS Latch-Lock Oval Handle SS Oval Handle Assembled Dry 2-1/4" Locking Stem Extension Multifill Seats Cleaned for Gaseous Oxygen Horizontal Chain Lever Static Grounded Ball & Stem 250 Lb. Steam Trim SIZES 1/4" to 1-1/2" 1/4" to 1-1/2" 1/4" to 1-1/2" 1/4" to 1-1/2" 1/4" to 1-1/2" 1/4" to 1-1/2" 1/4" to 1-1/2" 1/4" to 1-1/2" 1/4" to 1-1/2" 3/4" to 1-1/2" 1/4" to 1-1/2" 1/4" to 1-1/2" 1/4" to 1-1/2" 1/4" to 1-1/2" 1/4" to 1-1/2" 1/4" to 1-1/2" 1/4" to 1-1/2" 1/4" to 1-1/2" 1/4" to 1-1/2" 1/4" to 1-1/2" 1/4" to 1-1/2" 1/4" to 1" 1/4" to 1-1/2" 1/4" to 1-1/2" 1/4" to 1-1/2" 1/4" to 1-1/2" 1/4" to 1-1/2" 3/4" to 1-1/2" 1/4" to 1-1/2" 1/4" to 1-1/2"
1/00
A-3
Threaded, 600 psig WOG, Cold Non-Shock. 150 psig Saturated Steam. Vacuum Service to 29 inches Hg. Federal Specification: WW-V-35C, Type: II, Composition: BZ, Style: 3.
FEATURES
Chromium plated ball RPTFE seats and stuffing box ring Mounting pad for easy actuator mounting Blow-out-proof stem design Adjustable packing gland
VARIATIONS AVAILABLE:
71-120 Series 71-140 Series 71-150 Series 71-190 Series (Adjustable Stop Lever) (316 SS Ball & Stem) (Balancing Stop) (Locked Retainer)
OPTIONS AVAILABLE:
(SUFFIX) -02-03-04-05-07-08-10-14-15-16-21-24-27-30-32-35-39-40-41-45-46-47-48-49-50-56-57-58-60-64-P01-T01OPTION Static Grounded 1-1/4" Stem Extension 2-1/4" Stem Extension Plain Ball Tee Handle 90 Reversed Stem SS Lever & Nut Vented Ball (see page J-2) Round Handle Vertical Chain Lever UHMWPE Seats (Non-PTFE) Graphite Stem Packing Latch Lock Lever CamLock Handle SS Tee Handle & Nut PTFE Trim SS Latch Lock Wheel Handle Cyl-Loc Auto Drain (see page J-8) Less Lever & Nut Latch Lock Lever - Lock Close Only SS Latch-Lock Oval Handle SS Oval Handle Assembled Dry 2-1/4" Locking Stem Extension Multifill Seats Cleaned for Gaseous Oxygen Horizontal Chain Lever Static Grounded Ball & Stem 250 Lb. Steam Trim BSPP (Parallel) Thread Connection BSPT (Tapered) Thread Connection SIZES 3/4" to 3" 3/4" to 3" 3/4" to 3" 3/4" to 3" 3/4" to 2" 3/4" to 3" 3/4" to 3" 3/4" to 3" 3/4" to 2" 3/4" to 2" 3/4" to 3" 3/4" to 3" 3/4" to 3" 3/4" to 2" 3/4" to 2" 3/4" to 3" 3/4" to 2" 3/4" to 2" 3/4" to 2" 3/4" to 3" 3/4" to 3" 3/4" to 1" 3/4" to 2" 3/4" to 3" 3/4" to 3" 3/4" to 3" 3/4" to 3" 3/4" to 2" 3/4" to 3" 3/4" to 3" 3/4" to 3" 3/4" to 3"
*See 77-140 Series Full Port for 1/4", 3/8", 1/2" and 2-1/2" Sizes
A-4
1/00
FEATURES
Multi-piece packing set ISO 5211 mounting pad Stainless ball & stem Blow-out-proof stem design Adjustable packing gland Live loaded packing
OPTIONS AVAILABLE:
(SUFFIX) -14-24-27-35-57OPTION Vented Ball Graphite Stem Packing Latch Lock Handle PTFE Seats Oxygen Cleaned SIZES 3/4" to 3" 3/4" to 2" 3/4" to 3" 3/4" to 3" 3/4" to 3"
71-AR6-64 1-1/4" 71-AR7-64 1-1/2" 71-AR8-64 71-AR0-64 2" 3" 71-AR9-64 2-1/2"
1/00
A-5
Threaded, 3000 psig WOG, Cold Non-Shock Body rating (see P/T Chart referenced below for seat rating). 150 psig Saturated Steam. Vacuum Service to 29 inches Hg. Federal Specification: WW-V-35C, Type: II, Composition: CS, Style: 3.
FEATURES
Barstock design RPTFE seats and stuffing box ring Fire safe design when ordered with graphite packing Nitride corrosion protection Adjustable packing gland Full port, except 2" Blow-out-proof stem design Heavy duty lever
VARIATIONS AVAILABLE:
72-140 Series (316 SS Ball & Stem)
OPTIONS AVAILABLE:
(SUFFIX) -02-03-04-07-08-10-14-15-19-21-24-45-56-60-64OPTION Static Grounded 1-1/4" Stem Extension 2-1/4" Stem Extension Tee Handle 90 Reversed Stem SS Lever & Nut Vented Ball (see page J-2) Round Handle Lock Plate UHMWPE Seats (Non-PTFE) Graphite Stem Packing Less Lever & Nut Multifill Seats Static Grounded Ball & Stem 250 Lb. Steam Trim SIZES 1/2" to 2" 1" to 1-1/2" 1" to 1-1/2" 1/2" to 1-1/2" 1/2" to 2" 1/2" to 1-1/2" 1/2" to 2" 1/2" to 1" 1/2" to 2" 1/2" to 2" 1/2" to 2" 1/2" to 2" 1/2" to 2" 1/2" to 2" 1/2" to 2"
A-6
1/00
Threaded, 3000 psig WOG, Cold Non-Shock Body Rating (see P/T Chart referenced below for seat rating). 150 psig Saturated Steam. Vacuum Service to 29 inches Hg. Federal Specification: WW-V-35C, Type: II, Composition: CS, Style: 3.
FEATURES
Barstock design RPTFE seats and stuffing box ring Fire safe design when ordered with graphite packing Nitride corrosion protection Adjustable packing gland Full port, except 2" Blow-out-proof stem design Heavy duty lever SAE J512/J514 Straight Thread O-Ring Boss
VARIATIONS AVAILABLE:
72-940 Series (316 SS Ball & Stem)
OPTIONS AVAILABLE:
(SUFFIX) -02-03-04-07-08-10-14-15-19-21-24-45-56-60-64OPTION Static Grounded 1-1/4" Stem Extension 2-1/4" Stem Extension Tee Handle 90 Reversed Stem SS Lever & Nut Vented Ball (see page J-2) Round Handle Lock Plate UHMWPE Seats (Non-PTFE) Graphite Stem Packing Less Lever & Nut Multifill Seats Static Grounded Ball & Stem 250 Lb. Steam Trim SIZES 1/4" to 2" 1" to 1-1/2" 1" to 1-1/2" 1/4" to 1-1/2" 1/4" to 2" 1/4" to 1-1/2" 1/4" to 2" 1/4" to 1" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2"
.39 1.46 .51 1.46 .62 1.46 .81 1.00 1.25 1.50 1.75 1.87 2.12 2.32 2.64 3.00
5.62 3.07 6.62 4.91 8.00 7.73 8.00 10.21 9.00 14.88
1/00
A-7
Threaded, 1/4" to 1" 2000 psig WOG, 1-1/4" to 2" 1500 psig WOG. Cold Non-Shock. 150 psig Saturated Steam. Vacuum Service to 29 inches Hg. Federal Specification: WW-V-35C, Type: II, Composition: CS, Style: 3.
FEATURES
Barstock design RPTFE seats and stuffing box ring Fire safe design when ordered with graphite packing Adjustable packing gland Blow-out-proof stem design Nitride corrosion protection
VARIATIONS AVAILABLE:
73-140 Series (316 SS Ball & Stem) 73-160 Series (NACE Trim)
OPTIONS AVAILABLE:
(SUFFIX) -02-03-04-06-07-08-10-14-15-19-24-44-45-56-60-64-P01-T01OPTION Static Grounded 1-1/4" Stem Extension 2-1/4" Stem Extension 2000 psig WOG Tee Handle 90 Reversed Stem SS Lever & Nut Vented Ball (see page J-2) Round Handle Lock Plate Graphite Stem Packing Seal Welded Less Lever & Nut Multifill Seats Static Grounded Ball & Stem 250 Lb. Steam Trim BSPP (Parallel) Thread Connection BSPT (Tapered) Thread Connection SIZES 1/4" to 2" 1/4" to 2" 1/4" to 2" 1-1/4" to 2" 1/4" to 1-1/2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 1-1/2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2"
For Pressure/Temperature Ratings, Refer to Page N-15, Graph No. 13 (1/4" to 1") Refer to Page N-14, Graph No. 11 (1-1/4" to 2")
A-8
AAR Approved #E999032 Threaded, 2000 psig WOG, Cold Non-Shock. 150 psig Saturated Steam. Vacuum Service to 29 inches Hg. Federal Specification: WW-V-35C, Type: II, Composition: CS, Style: 3.
FEATURES
RPTFE seats & packing Actuator mounting pads Forged construction Raised handle stops Blow-out-proof stem design Adjustable packing gland Nitride corrosion protection (-24) Fire safe to API 607 4th ed. class 600 burn
OPTIONS AVAILABLE:
(SUFFIX) -02-03-04-07-08-10-14-15-24-27-44-45-56-60-64-71-P01-T01OPTION Static Grounded 1-1/4" Stem Extension 2-1/4" Stem Extension Tee Handle 90 Reversed Stem SS Lever & Nut Vented ball Round Handle Graphite Stem Packing Latch Lock Lever Seal welded Less Lever & Nut Multi-fill Seats Static Grounded Ball & Stem 250 Lb. Steam Trim Actuator Mtg. Drilled & Tapped BSPP (Parallel) Thread Conn. BSPT (Tapered) Thread Conn. SIZES 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 1-1/2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 1-1/2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2"
1/00
A-9
Threaded, 1/4" to 1" 2000 psig WOG, 1-1/4" to 2" 1500 psig WOG, 2-1/2" to 3" 1000 psig WOG Cold Non-Shock. 150 psig Saturated Steam, Vacuum Service to 29 inches Hg. Federal Specification: WW-V-35C, Type: II, Composition: SS, Style: 3.
FEATURES
Investment cast components RPTFE seats and stuffing box ring Mounting pad for easy actuator mounting Blow-out-proof stem design Adjustable packing gland Meets NACE MR-01-75 SS lever and nut (-24) 1/4" to 2" Certified to API 607, 4th Edition, Class 600 burn
OPTIONS AVAILABLE:
(SUFFIX) -02-03-04-07-08-14-15-16-19-21-24-27-30-32-35-39-40-44-45-46-47-48-49-50-57-58-60-64-P01-T01OPTION Static Grounded 1-1/4" Stem Extension 2-1/4" Stem Extension Tee Handle 90 Reversed Stem Vented Ball (see page J-2) Round Handle Vertical Chain Lever Lock Plate UHMWPE Seats (Non-PTFE) Graphite Stem Packing Latch Lock Lever CamLock Handle SS Tee Handle & Nut PTFE Trim SS Latch Lock Wheel Handle Cyl-Loc Seal Welded Less Lever & Nut Latch Lock Lever - Lock Close Only SS Latch Lock Oval Handle SS Oval Handle Assembled Dry 2-1/4" Locking Stem Extension Cleaned For Gaseous Oxygen Horizontal Chain Lever Static Grounded Ball & Stem 250 Lb. Steam Trim BSPP (Parallel) Thread Connection BSPT (Tapered) Thread Connection SIZES 1/4" to 3" 1/4" to 3" 1/4" to 3" 1/4" to 2" 1/4" to 3" 1/4" to 2" 1/4" to 2" 3/4" to 2" 1/4" to 2" 1/4" to 3" 1/4" to 3" 1/4" to 3" 1/4" to 2" 1/4" to 2" 1/4" to 3" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 3" 1/4" to 3" 1/4" to 1" 1/4" to 2" 1/4" to 3" 1/4" to 3" 1/4" to 3" 3/4" to 2" 1/4" to 3" 1/4" to 3" 1/4" to 3" 1/4" to 3"
For Pressure/Temperature Ratings, Refer to Page N-15, Graph No. 14 (1/4" to 1") Refer to Page N-14, Graph No. 12 (1-1/4" to 2") Refer to Page N-12, Graph No. 8 (2-1/2" to 3") 1/00
A-10
FEATURES
Multi-piece packing set ISO 5211 mounting pad Blow-out-proof stem design Adjustable packing gland Live loaded packing
OPTIONS AVAILABLE:
(SUFFIX) -14-24-27-35-57OPTION Vented Ball Graphite Stem Packing Latch Lock Handle PTFE Seats Oxygen Cleaned SIZES 1/4" to 3" 1/4" to 3" 1/4" to 2" 1/4" to 3" 1/4" to 3"
For Pressure/Temperature Ratings, Refer to Page N-15, Graph No. 14 (1/4" to 1") Refer to Page N-14, Graph No. 12 (1-1/4" to 2") Refer to Page N-12, Graph No. 8 (2-1/2" to 3")
STAINLESS STEEL STD. PORT BALL VALVE WITH ISO MOUNTING PAD
J (FLATS) .247/.249 .247/.249 .247/.249 .247/.249 .247/.249 .370/.372 .370/.372 .370/.372 .370/.372 .370/.372 K (THRDS.) UNF 3/8-24 3/8-24 3/8-24 3/8-24 3/8-24 5/8-18 5/8-18 5/8-18 5/8-18 5/8-18 WT. .52 .48 .58 1.26 1.62 3.22 4.06 6.18 12.96 17.06
NUMBER 76-AR1-64 76-AR2-64 76-AR3-64 76-AR4-64 76-AR5-64 76-AR6-64 76-AR7-64 76-AR8-64 76-AR9-64 76-AR0-64
B 1.03 1.03 1.12 1.50 1.68 1.98 2.18 2.75 3.12 3.37
C 2.06 2.06 2.25 3.00 3.37 3.97 4.37 5.50 6.25 6.75
D 1.40 1.40 1.54 2.16 2.28 3.16 3.16 3.37 3.85 4.18
E .59 .59 .59 .70 .70 .98 .98 .98 .98 .98
F 1.17 1.17 1.17 1.39 1.39 1.95 1.95 1.95 1.95 1.95
G .28 .28 .28 .28 .28 .34 .34 .34 .34 .34
H .61 .61 .61 .84 .84 1.16 1.16 1.16 1.16 1.16
I .23 .23 .21 .37 .37 .54 .58 .55 .54 .54
1-1/4" 1.00 1-1/2" 1.25 2" 1.50 2-1/2" 2.00 3" 2.50
1/00
A-11
Threaded, 600 psig WOG, Cold Non-Shock. 150 psig Saturated Steam. Vacuum Service to 29 inches Hg. Federal Specification: WW-V-35C, Type: II, Composition: BZ, Style: 3.
FEATURES
Chromium plated ball RPTFE seats and stuffing box ring Mounting pad for easy actuator mounting Blow-out-proof stem design Adjustable packing gland Full port for full flow & min. pressure drop
VARIATIONS AVAILABLE:
77-140 Series (316 SS Ball & Stem) 77-150 Series (Original Balancing Stop) 77-190 Series (Locked Retainer)
OPTIONS AVAILABLE:
(SUFFIX) -02-03-04-05-07-08-10-14-15-16-17-18-20-24-27-28-30-32-35-36-40-45-46-47-48-49-50-56-57-58-60-63-64-P01-T01OPTION Static Grounded 1-1/4" Stem Extension 2-1/4" Stem Extension Plain Ball Tee Handle 90 Reversed Stem SS Lever & Nut Vented Ball (see page J-2) Round Handle Vertical Chain Lever Rough Chrome Plating Plain Yellow Grip Slot Vented Ball Graphite Stem Packing Latch Lock Lever Mounting Pad Not Drilled & Tapped CamLock Handle SS Tee Handle & Nut PTFE Trim SS High-Rise Round Handle & Nut Cyl-Loc Less Lever & Nut Latch Lock Lever - Lock Close Only SS Latch-Lock Oval Handle SS Oval Handle Assembled Dry 2-1/4" Locking Stem Extension Multifill Seats Cleaned For Gaseous Oxygen Horizontal Chain Lever Static Grounded Ball & Stem Threaded x Solder 250 Lb. Steam Trim BSPP (Parallel) Thread Connection BSPT (Tapered) Thread Connection SIZES 1/4" to 2-1/2" 1/4" to 2-1/2" 1/4" to 2-1/2" 1/4" to 2-1/2" 1/4" to 1-1/4" 1/4" to 2-1/2" 1/4" to 2-1/2" 1/4" to 2-1/2" 1/4" to 1-1/4" 3/4" to 2-1/2" 1/4" to 2-1/2" 1/4" to 2-1/2" 1/4" to 2-1/2" 1/4" to 2-1/2" 1/4" to 2-1/2" 1/4" to 2-1/2" 1/4" to 1-1/4" 1/4" to 1-1/4" 1/4" to 2-1/2" 1/4" to 1-1/4" 1/4" to 1-1/4" 1/4" to 2-1/2" 1/4" to 2-1/2" 1/4" to 3/4" 1/4" to 2" 1/4" to 2-1/2" 1/4" to 2-1/2" 1/4" to 2-1/2" 1/4" to 2-1/2" 3/4" to 2-1/2" 1/4" to 2-1/2" 1/4" to 2-1/2" 1/4" to 2-1/2" 1/4" to 2-1/2" 1/4" to 2-1/2"
A-12
1/00
FEATURES
Multi-piece packing set ISO 5211 mounting pad Stainless ball & stem Blow-out-proof stem design Adjustable packing gland Live loaded packing
OPTIONS AVAILABLE:
(SUFFIX) -14-24-27-35-57OPTION Vented Ball Graphite Stem Packing Latch Lock Handle PTFE Seats Oxygen Cleaned SIZES 1/4" to 3" 1/4" to 3" 1/4" to 2" 1/4" to 3" 1/4" to 3"
CARBON STEEL STD. PORT BALL VALVE WITH ISO MOUNTING PAD
J (FLATS) .247/.249 .247/.249 .247/.249 .247/.249 .247/.249 .370/.372 .370/.372 K (THRDS.) UNF 3/8-24 3/8-24 3/8-24 3/8-24 3/8-24 5/8-18 5/8-18 WT. .60 .57 .62 1.76 3.44 6.25 11.72
77-AR7-64 1-1/2"
1/00
A-13
Solder End, 600 psig WOG, Cold Non-Shock. 150 psig Saturated Steam. Vacuum Service to 29 inches Hg. Federal Specification: WW-V-35C, Type: II, Composition: BZ, Style: 3.
FEATURES
Chromium plated ball RPTFE seats and stuffing box ring Full port for full flow & min. pressure drop Blow-out-proof stem design Adjustable packing gland
VARIATIONS AVAILABLE:
77-240 Series (316 SS Ball & Stem) 77-250 Series (Balancing Stop)
OPTIONS AVAILABLE:
(SUFFIX) -02-03-04-05-07-08-10-14-15-16-17-20-24-27-30-32-35-40-45-46-47-48-49-50-56-57-58-60-63OPTION Static Grounded 1-1/4" Stem Extension 2-1/4" Stem Extension Plain Ball Tee Handle 90 Reversed Stem SS Lever & Nut Vented Ball (see page J-2) Round Handle Vertical Chain Lever Rough Chrome Plating Slot Vented Ball Graphite Stem Packing Latch Lock Lever CamLock Handle SS Tee Handle & Nut PTFE Trim Cyl-Loc Less Lever & Nut Latch Lock Lever - Lock Close Only SS Latch-Lock Oval Handle SS Oval Handle Assembled Dry 2-1/4" Locking Stem Extension Multifill Seats Cleaned For Gaseous Oxygen Horizontal Chain Lever Static Grounded Ball & Stem Threaded x Solder SIZES 3/4" to 2-1/2" 3/4" to 2-1/2" 3/4" to 2-1/2" 3/4" to 2-1/2" 3/4" to 1-1/4" 3/4" to 2-1/2" 3/4" to 2-1/2" 3/4" to 2-1/2" 3/4" to 1-1/4" 3/4" to 2-1/2" 3/4" to 2-1/2" 3/4" to 2-1/2" 3/4" to 2-1/2" 3/4" to 2-1/2" 3/4" to 1-1/4" 3/4" to 1-1/4" 3/4" to 2-1/2" 3/4" to 1-1/4" 3/4" to 2-1/2" 3/4" to 2-1/2" 3/4" ONLY 3/4" to 2-1/2" 3/4" to 2-1/2" 3/4" to 2-1/2" 3/4" to 2-1/2" 3/4" to 2-1/2" 3/4" to 2-1/2" 3/4" to 2-1/2" 3/4" to 2-1/2"
The 77-200 is designed to be soft soldered into lines without disassembly. This allows a tested valve to be installed without disturbing the seats and seals in any way. Soldering temperature not to exceed 500F.
A-14
1/00
77-900 Series
FEATURES
Chromium plated ball RPTFE seats and stuffing box ring Mounting pad for easy actuator mounting Straight thread w/O-Ring boss connection
Blow-out-proof stem design Adjustable packing gland Full port for full flow & min. pressure drop SAE J512/J514 Straight Thread O-Ring Boss
OPTIONS AVAILABLE:
(SUFFIX) -02-03-04-07-08-10-15-17-24-27-30-32-35-46-48-50OPTION Static Grounded 1-1/4" Stem Extension 2-1/4" Stem Extension Tee Handle 90 Reversed Stem SS Lever & Nut Round Handle Rough Chrome Plating Graphite Stem Packing Latch Lock Lever CamLock Handle SS Tee Handle & Nut PTFE Trim Latch Lock Lever - Lock Close Only SS Oval Handle 2-1/4" Locking Stem Extension SIZES 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 3" 1/4" to 2" 1/4" to 2"
NPT Threaded, 1/4" to 1" 2000 psig WOG, 1-1/4" to 2" 1500 psig WOG, 2-1/2" to 3" 1000 psig WOG Cold Non-Shock. 150 psig Saturated Steam. Vacuum Service to 29 inches Hg. Federal Specification: WW-V-35C, Type: II, Composition: CS, Style: 3. Complies with MSS SP-110
FEATURES
Investment cast components Blow-out-proof stem design RPTFE seats and stuffing box ring Adjustable packing gland Mounting pad for easy actuator mounting Nitride corrosion protection (-24) Certified to API 607, 4th, Edition, Class 600 burn
VARIATIONS AVAILABLE:
89-140 Series (316 SS Ball & Stem) 89-190 Series (Locked Retainer)
OPTIONS AVAILABLE:
(SUFFIX) -02-03-04-07-08-10-14-15-16-18-19-24-27-30-32-35-39-40-44-45-46-47-48-50-56-58-60-64-P01-T01OPTION Static Grounded 1-1/4" Stem Extension 2-1/4" Stem Extension Tee Handle 90 Reversed Stem SS Lever & Nut Vented Ball (see page J-2) Round Handle Vertical Chain Lever Plain Yellow Grip Lock Plate Graphite Stem Packing Latch Lock Lever CamLock Handle SS Tee Handle & Nut PTFE Trim SS Latch Lock Wheel Handle Cyl-Loc Seal Welded Less Lever & Nut Latch Lock Lever - Lock Close Only SS Latch-Lock Oval Handle SS Oval Handle 2-1/4" Locking Stem Extension Multifill Seats Horizontal Chain Lever Static Grounded Ball & Stem 250 Lb. Steam Trim BSPP (Parallel) Thread Connection BSPT (Tapered) Thread Connection SIZES 1/4" to 3" 1/4" to 3" 1/4" to 3" 1/4" to 2" 1/4" to 3" 1/4" to 3" 1/4" to 3" 1/4" to 2" 3/4" to 2" 1/4" to 3" 1/4" to 2" 1/4" to 3" 1/4" to 3" 1/4" to 2" 1/4" to 2" 1/4" to 3" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 3" 1/4" to 3" 1/4" to 1" 1/4" to 2" 1/4" to 3" 1/4" to 3" 3/4" to 2" 1/4" to 3" 1/4" to 3" 1/4" to 3" 1/4" to 3"
For Pressure/Temperature Ratings, Refer to Page N-15, Graph No. 13 (1/4" to 1") Refer to Page N-14, Graph No. 11 (1-1/4" to 2") 1/00
A-16
FEATURES
Multi-piece packing set ISO 5211 mounting pad Stainless ball & stem Blow-out-proof stem design Adjustable packing gland Live loaded packing
OPTIONS AVAILABLE:
(SUFFIX) -14-24-27-35-57OPTION Vented Ball Graphite Stem Packing Latch Lock Handle PTFE Seats Oxygen Cleaned SIZES 1/4" to 3" 1/4" to 3" 1/4" to 2" 1/4" to 3" 1/4" to 3"
For Pressure/Temperature Ratings, Refer to Page N-15, Graph No. 14 (1/4" to 1") Refer to Page N-14, Graph No. 12 (1-1/4" to 2") Refer to Page N-12, Graph No. 8 (2-1/2" to 3")
CARBON STEEL STD. PORT BALL VALVE WITH ISO MOUNTING PAD
J (FLATS) .247/.249 .247/.249 .247/.249 .247/.249 .247/.249 .370/.372 .370/.372 .370/.372 .370/.372 .370/.372 K (THRDS.) UNF 3/8-24 3/8-24 3/8-24 3/8-24 3/8-24 5/8-18 5/8-18 5/8-18 5/8-18 5/8-18 WT. .52 .49 .58 1.26 1.62 3.22 4.06 6.18 13.06 17.06
A .37 .37 .50 .68 .87 1.00 1.25 1.50 2.00 2.50
B 1.03 1.03 1.12 1.50 1.68 1.98 2.18 2.75 3.12 3.37
C 2.06 2.06 2.25 3.00 3.37 3.97 4.37 5.50 6.25 6.75
D 1.40 1.40 1.54 2.16 2.28 3.16 3.16 3.37 3.85 4.18
E .59 .59 .59 .70 .70 .98 .98 .98 .98 .98
F 1.17 1.17 1.17 1.39 1.39 1.95 1.95 1.95 1.95 1.95
G .28 .28 .28 .28 .28 .34 .34 .34 .34 .34
H .61 .61 .61 .84 .84 1.16 1.16 1.16 1.16 1.16
I .23 .23 .21 .37 .37 .54 .58 .55 .54 .54
89-AR6-64 1-1/4" 89-AR7-64 1-1/2" 89-AR8-64 89-AR0-64 2" 3" 89-AR9-64 2-1/2"
1/00
A-17
Threaded, 1/4" to 1" 2000 psig WOG, 1-1/4" to 2" 1500 psig WOG. Cold Non-Shock. 150 psig Saturated Steam. Vacuum Service to 29 inches Hg. Federal Specification: WW-V-35C, Type: II, Composition: SS, Style: 3.
Investment cast components RPTFE seats and stuffing box ring Mounting pad for easy actuator mounting
OPTIONS AVAILABLE:
(SUFFIX) -02-03-04-07-08-14-15-16-18-19-21-24-27-28-30-32-35-40-45-46-47-48-49-50-56-57-58-60-64-P01-T01F .50 .50 .50 .87 .87 .93 .93 .93 G 1.12 1.12 1.12 1.37 1.37 1.50 1.50 1.50 Wt. .58 .54 .63 1.27 1.63 3.06 4.04 6.05 OPTION Static Grounded 1-1/4" Stem Extension 2-1/4" Stem Extension Tee Handle 90 Reversed Stem Vented Ball (see page J-2) Round Handle Vertical Chain Lever Plain Yellow Grip Lock Plate UHMWPE Seats (Non-PTFE) Graphite Stem Packing Latch Lock Lever Mounting Pad Not Drilled & Tapped CamLock Handle SS Tee Handle & Nut PTFE Trim Cyl-Loc Less Lever & Nut Latch Lock Lever - Lock Close Only SS Latch-Lock Oval Handle SS Oval Handle Assembled Dry 2-1/4" Locking Stem Extension Multifill Seats Cleaned For Gaseous Oxygen Horizontal Chain Lever Static Grounded Ball & Stem 250 Lb. Steam Trim BSPP (Parallel) Thread Connection BSPT (Tapered) Thread Connection SIZES 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 3/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 1" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 3/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2"
For Pressure/Temperature Ratings, Refer to Page N-18, Graph No. 20 (1/4" to 1") Refer to Page N-18, Graph No. 19 (1-1/4" to 2") 1/00
A-18
SECTION B CONTENTS
THREE PIECE BALL VALVES
DESCRIPTION
82-100 Series, Threaded Full Port Bronze 82-200 Series, Solder Full Port Bronze 83R-100 Series, Actuator Ready Threaded Full Port Carbon Steel 83R-200 Series, Actuator Ready Socket Weld Full Port Carbon Steel 83R-700 Series, Actuator Ready Butt Weld Full Port Carbon Steel 85R-100 Series, Actuator Ready Threaded Stainless Steel 85R-200 Series, Actuator Ready Socket Weld Stainless Steel 86R-100 Series, Actuator Ready Threaded Full Port Stainless Steel 86R-200 Series, Actuator Ready Socket Weld Full Port Stainless Steel 86R-700 Series, Actuator Ready Butt Weld Full Port Stainless Steel 83-100 Series, Threaded Full Port Carbon Steel 83-200 Series, Socket Weld Full Port Carbon Steel 83-300 Series, Threaded High Pressure Carbon Steel 83-400 Series, Socket Weld High Pressure Carbon Steel 83-500 Series, Threaded Full Port High Pressure Carbon Steel 83-600 Series, Socket Weld Full Port High Pressure Carbon Steel 83-700 Series, Butt-Weld Full Port Carbon Steel 85-100 Series, Threaded Stainless Steel 85-200 Series, Socket Weld Stainless Steel 86-100 Series, Threaded Full Port Stainless Steel 86-200 Series, Socket Weld Full Port Stainless Steel 86-500 Series, Threaded Full Port High Pressure Stainless Steel 86-600 Series, Socket Weld Full Port High Pressure Stainless Steel 86-700 Series, Butt-Weld Full Port Stainless Steel 86-900 Series, Butt-Weld Full Port High Pressure Stainless Steel 401-100 Series, Threaded Full Port Alloy-20 401-200 Series, Socket Weld Full Port Alloy-20 (New Item) (New Item) (New Item) (New Item) (New Item) (New Item) (New Item) (New Item)
PAGE
B-1 B-2 B-3 B-4 B-5 B-6 B-7 B-8 B-9 B-10 B-11 B-12 B-13 B-14 B-15 B-16 B-17 B-18 B-19 B-20 B-21 B-22 B-23 B-24 B-25 B-26 B-27
Threaded, 600 psig WOG, Cold Non-Shock. 150 psig Saturated Steam. Vacuum Service to 29 inches Hg. Federal Specification: WW-V-35C, Type: II, Composition: BZ, Style: 1.
FEATURES
Full port configuration RPTFE seats and seals In-line repairable Blow-out-proof stem design Adjustable packing gland
OPTIONS AVAILABLE:
1-1/4 Stem Extension 2-1/4 Stem Extension Plain Ball Tee Handle 90 Reversed Stem SS Lever & Nut Vented Ball (see page J-2) Round Handle Vertical Chain Lever Plain Yellow Grip Lock Plate Slot Vented Ball UHMWPE Seats Tank Flange Graphite Stem Packing Latch Lock Lever CamLock Handle SS Tee Handle & Nut PTFE Trim Less Lever & Nut Latch Lock Lever - Lock Close Only SS Oval Handle Assembled Dry 2-1/4 Locking Stem Extension Cleaned for Gaseous Oxygen Horizontal Chain Lever SS Body Trim Static Grounded Ball & Stem Threaded x Solder BSPP (Parallel) Thread Connection BSPT (Tapered) Thread Connection SIZES 1/4 to 4 1/4 to 2 1/4 to 2 1/4 to 4 1/4 to 2 1/4 to 4 1/4 to 4 1/4 to 4 1/4 to 2 1/2 to 2 1/4 to 2 1/4 to 4 1/4 to 4 1/4 to 4 2 ONLY 1/4 to 4 1/2 to 2 1/4 to 1-1/4 1/4 to 2 1/4 to 4 1/4 to 4 1/2 to 2 1/4 to 2 1/4 to 4 1/4 to 2 1/4 to 4 1/2 to 2 1/4 to 4 1/4 to 4 3/8 to 4 1/4 to 4 1/4 to 4
VARIATIONS AVAILABLE:
82-140 Series (316 SS Ball & Stem) 82-150 Series (Original Balancing Stop)
1/00
B-1
82-200 Series
FEATURES
OPTIONS AVAILABLE:
2-1/4 Stem Extension Plain Ball Tee Handle 90 Reversed Stem SS Lever & Nut Vented Ball (see page J-2) Round Handle Vertical Chain Lever Plain Yellow Grip Lock Plate Slot Vented Ball UHMWPE Seats Tank Flange Graphite Stem Packing Latch Lock Lever CamLock Handle SS Tee Handle & Nut PTFE Trim Less Lever & Nut Latch Lock Lever - Lock Close Only SS Oval Handle Assembled Dry 2-1/4 Locking Stem Extension Cleaned for Gaseous Oxygen Horizontal Chain Lever SS Body Trim Static Grounded Ball & Stem SIZES 3/8 to 4 3/8 to 2 3/8 to 2 3/8 to 4 3/8 to 2 3/8 to 4 3/8 to 4 3/8 to 4 3/8 to 2 1/2 to 2 3/8 to 2 3/8 to 4 3/8 to 4 3/8 to 4 2 ONLY 3/8 to 4 1/2 to 2 3/8 to 1-1/4 3/8 to 2 3/8 to 4 3/8 to 4 1/2 to 2 1/4 to 2" 3/8 to 4 3/8 to 2 3/8 to 4 1/2 to 2 3/8 to 4 3/8 to 4
VARIATIONS AVAILABLE:
82-240 Series (316 SS Ball & Stem)
B-2
1/00
83R-100 Series
FEATURES
Carbon Steel 3-Piece Full Port Ball Valve With Actuator Ready ISO Mounting Pad
Full Port Threaded, 1000 psig WOG, Cold Non-Shock. 150 psig Saturated Steam. Vacuum Service to 29 inches Hg. Federal Specification: WW-V-35C, Type: II, Composition: CS, Style: 1.
NE W 20 FO 00 R
Multi-piece packing set ISO 5211 mounting pad Blow-out-proof stem design In-line repairable
Adjustable packing gland Investment cast components RPTFE seats and seals Full port configuration
VARIATIONS AVAILABLE:
83R-140 Series (316 SS Ball & Stem) Meets NACE MR-01-75 (1-1/4" to 2")
OPTIONS AVAILABLE:
(SUFFIX) -02-03-04-08-10-14-18-21-24-27-35-39-59-60-63-P01-T01-AR-WBOPTION SIZES Static Grounded 1/4" to 2" 1-1/4 Stem Extension 1/4" to 2" 2-1/4 Stem Extension 1/4" to 2" 90 Reversed Stem 1/4" to 2" SS Lever & Nut 1/4" to 2" Vented Ball 1/4" to 2" Plain Yellow Grip 1/4" to 2" UHMWPE Seats (Non-PTFE) 1/4" to 2" Graphite Stem Packing 1/4" to 2" Latch Lock Lever 1/4" to 2" PTFE Trim 1/4" to 2" SS Latch Lock Round Handle 1/4" to 2" SS Body Trim 1/4" to 2" Static Grounded Ball & Stem 1/4" to 2" Threaded x Socket Weld 1/4" to 2" BSPP (Parallel) Thread Connection 1/4" to 2" BSPT (Tapered) Thread Connection 1/4" to 2" Less Handle & Stop-Add Belleville Washers1/4" to 2" With Lever & Belleville Washers 1/4" to 2"
83R-101-01 1/4" 83R-102-01 3/8" 83R-103-01 1/2" 83R-104-01 3/4" 83R-105-01 1" 83R-106-01 1-1/4" 83R-107-01 1-1/2" 83R-108-01 2"
1/00
B-3
R O F W 000 NE 2
83R-200 Series
FEATURES
Carbon Steel 3-Piece Full Port Socket Weld Ball Valve With Actuator Ready ISO Mounting Pad
Socket Weld, 1000 psig WOG, Cold Non-Shock. 150 psig Saturated Steam. Vacuum Service to 29 inches Hg. Federal Specification: WW-V-35C, Type: II, Composition: CS, Style: 1.
Multi-piece packing set ISO 5211 mounting pad Blow-out-proof stem design In-line repairable
Adjustable packing gland Investment cast components RPTFE seats and seals Full port configuration
VARIATIONS AVAILABLE:
83R-240 Series (316 SS Ball & Stem) Meets NACE MR-01-75 (1-1/4" to 2")
OPTIONS AVAILABLE:
(SUFFIX) -02-03-04-08-10-14-18-21-24-27-35-39-59-60-63-P01-T01-AR-WBOPTION SIZES Static Grounded 1/4" to 2" 1-1/4 Stem Extension 1/4" to 2" 2-1/4 Stem Extension 1/4" to 2" 90 Reversed Stem 1/4" to 2" SS Lever & Nut 1/4" to 2" Vented Ball 1/4" to 2" Plain Yellow Grip 1/4" to 2" UHMWPE Seats (Non-PTFE) 1/4" to 2" Graphite Stem Packing 1/4" to 2" Latch Lock Lever 1/4" to 2" PTFE Trim 1/4" to 2" SS Latch Lock Round Handle 1/4" to 2" SS Body Trim 1/4" to 2" Static Grounded Ball & Stem 1/4" to 2" Threaded x Socket Weld 1/4" to 2" BSPP (Parallel) Thread Connection 1/4" to 2" BSPT (Tapered) Thread Connection 1/4" to 2" Less Handle & Stop-Add Belleville Washers1/4" to 2" With Lever & Belleville Washers 1/4" to 2"
83R-201-01 1/4" 83R-202-01 3/8" 83R-203-01 1/2" 83R-204-01 3/4" 83R-205-01 1" 83R-206-01 1-1/4" 83R-207-01 1-1/2" 83R-208-01 2"
B-4
1/00
83R-700 Series
FEATURES
Carbon Steel 3-Piece Full Port Butt-Weld Ball Valve With Actuator Ready ISO Mounting Pad
Schedule 40 Butt-Weld Ends, 1000 psig WOG, Cold Non-Shock. 150 psig Saturated Steam. Vacuum Service to 29 inches Hg. Federal Specification: WW-V-35C, Type: II, Composition: CS, Style: 1.
NE W 20 FO 00 R
Multi-piece packing set ISO 5211 mounting pad Blow-out-proof stem design In-line repairable
Adjustable packing gland Investment cast components RPTFE seats and seals Full port configuration
VARIATIONS AVAILABLE:
83R-740 Series (316 SS Ball & Stem) Meets NACE MR-01-75 (1-1/4" to 2")
OPTIONS AVAILABLE:
(SUFFIX) -02-03-04-08-10-14-18-21-24-27-35-39-59-60-63-P01-T01-AR-WBOPTION SIZES Static Grounded 1/2" to 2" 1-1/4 Stem Extension 1/2" to 2" 2-1/4 Stem Extension 1/2" to 2" 90 Reversed Stem 1/2" to 2" SS Lever & Nut 1/2" to 2" Vented Ball 1/2" to 2" Plain Yellow Grip 1/2" to 2" UHMWPE Seats (Non-PTFE) 1/2" to 2" Graphite Stem Packing 1/2" to 2" Latch Lock Lever 1/2" to 2" PTFE Trim 1/2" to 2" SS Latch Lock Round Handle 1/2" to 2" SS Body Trim 1/2" to 2" Static Grounded Ball & Stem 1/2" to 2" Threaded x Socket Weld 1/2" to 2" BSPP (Parallel) Thread Connection 1/2" to 2" BSPT (Tapered) Thread Connection 1/2" to 2" Less Handle & Stop-Add Belleville Washers1/2" to 2" With Lever & Belleville Washers 1/2" to 2"
83R-703-01 1/2" 83R-704-01 3/4" 83R-705-01 1" 83R-706-01 1-1/4" 83R-707-01 1-1/2" 83R-708-01 2"
1/00
B-5
R O F W 000 NE 2
85R-100 Series
FEATURES
Stainless Steel 3-Piece Ball Valve With Actuator Ready ISO Mounting Pad
Std. Port Threaded, 1000 psig WOG, Cold Non-Shock. 150 psig Saturated Steam. Vacuum Service to 29 inches Hg. Federal Specification: WW-V-35C, Type: II, Composition: SS, Style: 1.
Multi-piece packing set ISO 5211 mounting pad Blow-out-proof stem design In-line repairable
Adjustable packing gland Investment cast components RPTFE seats and seals Full port configuration Meets NACE MR01-75
OPTIONS AVAILABLE:
(SUFFIX) -02-03-04-08-14-18-21-24-27-35-39-49-57-60-63-P01-T01-AR-WBOPTION SIZES Static Grounded 3/4" to 2" 1-1/4 Stem Extension 3/4" to 2" 2-1/4 Stem Extension 3/4" to 2" 90 Reversed Stem 3/4" to 2" Vented Ball 3/4" to 2" Plain Yellow Grip 3/4" to 2" UHMWPE Seats (Non-PTFE) 3/4" to 2" Graphite Stem Packing 3/4" to 2" Latch Lock Lever 3/4" to 2" PTFE Trim 3/4" to 2" SS Latch Lock Round Handle 3/4" to 2" Assembled Dry 3/4" to 2" Cleaned For Gaseous Oxygen 3/4" to 2" Static Grounded Ball & Stem 3/4" to 2" Threaded x Socket Weld 3/4" to 2" BSPP (Parallel) Thread Connection 3/4" to 2" BSPT (Tapered) Thread Connection 3/4" to 2" Less Handle & Stop-Add Belleville Washers3/4" to 2" With Lever & Belleville Washers 3/4" to 2"
85R-104-01 3/4" 85R-105-01 1" 85R-106-01 1-1/4" 85R-107-01 1-1/2" 85R-108-01 2"
B-6
1/00
85R-200 Series
FEATURES
Stainless Steel 3-Piece Standard Port Socket Weld Ball Valve With Actuator Ready ISO Mounting Pad
Socket Weld, 1000 psig WOG, Cold Non-Shock. 150 psig Saturated Steam. Vacuum Service to 29 inches Hg. Federal Specification: WW-V-35C, Type: II, Composition: SS, Style: 1.
NE W 20 FO 00 R
Multi-piece packing set ISO 5211 mounting pad Blow-out-proof stem design In-line repairable
Adjustable packing gland Investment cast components RPTFE seats and seals Standard port configuration Meets NACE MR01-75
OPTIONS AVAILABLE:
(SUFFIX) -02-03-04-08-14-18-21-24-27-35-39-49-57-60-63-P01-T01-AR-WBOPTION SIZES Static Grounded 3/4" to 2" 1-1/4 Stem Extension 3/4" to 2" 2-1/4 Stem Extension 3/4" to 2" 90 Reversed Stem 3/4" to 2" Vented Ball 3/4" to 2" Plain Yellow Grip 3/4" to 2" UHMWPE Seats (Non-PTFE) 3/4" to 2" Graphite Stem Packing 3/4" to 2" Latch Lock Lever 3/4" to 2" PTFE Trim 3/4" to 2" SS Latch Lock Round Handle 3/4" to 2" Assembled Dry 3/4" to 2" Cleaned For Gaseous Oxygen 3/4" to 2" Static Grounded Ball & Stem 3/4" to 2" Threaded x Socket Weld 3/4" to 2" BSPP (Parallel) Thread Connection 3/4" to 2" BSPT (Tapered) Thread Connection 3/4" to 2" Less Handle & Stop-Add Belleville Washers3/4" to 2" With Lever & Belleville Washers 3/4" to 2"
85R-204-01 3/4" 85R-205-01 1" 85R-206-01 1-1/4" 85R-207-01 1-1/2" 85R-208-01 2"
1/00
B-7
R O F W 000 NE 2
86R-100 Series
FEATURES
Stainless Steel 3-Piece Full Port Ball Valve With Actuator Ready ISO Mounting Pad
Full Port Threaded, 1000 psig WOG, Cold Non-Shock. 150 psig Saturated Steam. Vacuum Service to 29 inches Hg. Federal Specification: WW-V-35C, Type: II, Composition: SS, Style: 1.
Multi-piece packing set ISO 5211 mounting pad Blow-out-proof stem design In-line repairable
Adjustable packing gland Investment cast components RPTFE seats and seals Full port configuration Meets NACE MR01-75
OPTIONS AVAILABLE:
(SUFFIX) -02-03-04-08-14-18-21-24-27-35-39-49-57-60-63-P01-T01-AR-WBOPTION SIZES Static Grounded 1/4" to 2" 1-1/4 Stem Extension 1/4" to 2" 2-1/4 Stem Extension 1/4" to 2" 90 Reversed Stem 1/4" to 2" Vented Ball 1/4" to 2" Plain Yellow Grip 1/4" to 2" UHMWPE Seats (Non-PTFE) 1/4" to 2" Graphite Stem Packing 1/4" to 2" Latch Lock Lever 1/4" to 2" PTFE Trim 1/4" to 2" SS Latch Lock Round Handle 1/4" to 2" Assembled Dry 1/4" to 2" Cleaned For Gaseous Oxygen 1/4" to 2" Static Grounded Ball & Stem 1/4" to 2" Threaded x Socket Weld 1/4" to 2" BSPP (Parallel) Thread Connection 1/4" to 2" BSPT (Tapered) Thread Connection 1/4" to 2" Less Handle & Stop-Add Belleville Washers1/4" to 2" With Lever & Belleville Washers 1/4" to 2"
86R-101-01 1/4" 86R-102-01 3/8" 86R-103-01 1/2" 86R-104-01 3/4" 86R-105-01 1" 86R-106-01 1-1/4" 86R-107-01 1-1/2" 86R-108-01 2"
B-8
1/00
86R-200 Series
FEATURES
Stainless Steel 3-Piece Full Port Socket Valve Ball Valve With Actuator Ready ISO Mounting Pad
Socket Weld, 1000 psig WOG, Cold Non-Shock. 150 psig Saturated Steam. Vacuum Service to 29 inches Hg. Federal Specification: WW-V-35C, Type: II, Composition: SS, Style: 1.
NE W 20 FO 00 R
Multi-piece packing set ISO 5211 mounting pad Blow-out-proof stem design In-line repairable
Adjustable packing gland Investment cast components RPTFE seats and seals Full port configuration Meets NACE MR01-75
OPTIONS AVAILABLE:
(SUFFIX) -02-03-04-08-14-18-21-24-27-35-39-49-57-60-63-P01-T01-AR-WBOPTION SIZES Static Grounded 1/4" to 2" 1-1/4 Stem Extension 1/4" to 2" 2-1/4 Stem Extension 1/4" to 2" 90 Reversed Stem 1/4" to 2" Vented Ball 1/4" to 2" Plain Yellow Grip 1/4" to 2" UHMWPE Seats (Non-PTFE) 1/4" to 2" Graphite Stem Packing 1/4" to 2" Latch Lock Lever 1/4" to 2" PTFE Trim 1/4" to 2" SS Latch Lock Round Handle 1/4" to 2" Assembled Dry 1/4" to 2" Cleaned For Gaseous Oxygen 1/4" to 2" Static Grounded Ball & Stem 1/4" to 2" Threaded x Socket Weld 1/4" to 2" BSPP (Parallel) Thread Connection 1/4" to 2" BSPT (Tapered) Thread Connection 1/4" to 2" Less Handle & Stop-Add Belleville Washers1/4" to 2" With Lever & Belleville Washers 1/4" to 2"
86R-201-01 1/4" 86R-202-01 3/8" 86R-203-01 1/2" 86R-204-01 3/4" 86R-205-01 1" 86R-206-01 1-1/4" 86R-207-01 1-1/2" 86R-208-01 2"
1/00
B-9
R O F W 000 NE 2
86R-700 Series
FEATURES
Stainless Steel 3-Piece Full Port Butt-Weld Ball Valve With Actuator Ready ISO Mounting Pad
Schedule 10 Butt-Weld Ends, 1000 psig WOG, Cold Non-Shock. 150 psig Saturated Steam. Vacuum Service to 29 inches Hg. Federal Specification: WW-V-35C, Type: II, Composition: SS, Style: 1.
Multi-piece packing set ISO 5211 mounting pad Blow-out-proof stem design In-line repairable
Adjustable packing gland Investment cast components RPTFE seats and seals Full port configuration Meets NACE MR01-75
OPTIONS AVAILABLE:
(SUFFIX) -02-03-04-08-14-18-21-24-27-35-39-49-57-60-63-P01-T01-AR-WBOPTION SIZES Static Grounded 1/2" to 2" 1-1/4 Stem Extension 1/2" to 2" 2-1/4 Stem Extension 1/2" to 2" 90 Reversed Stem 1/2" to 2" Vented Ball 1/2" to 2" Plain Yellow Grip 1/2" to 2" UHMWPE Seats (Non-PTFE) 1/2" to 2" Graphite Stem Packing 1/2" to 2" Latch Lock Lever 1/2" to 2" PTFE Trim 1/2" to 2" SS Latch Lock Round Handle 1/2" to 2" Assembled Dry 1/2" to 2" Cleaned For Gaseous Oxygen 1/2" to 2" Static Grounded Ball & Stem 1/2" to 2" Threaded x Socket Weld 1/2" to 2" BSPP (Parallel) Thread Connection 1/2" to 2" BSPT (Tapered) Thread Connection 1/2" to 2" Less Handle & Stop-Add Belleville Washers1/2" to 2" With Lever & Belleville Washers 1/2" to 2"
86R-703-01 1/2" 86R-704-01 3/4" 86R-705-01 1" 86R-706-01 1-1/4" 86R-707-01 1-1/2" 86R-708-01 2"
B-10
1/00
Threaded, 1000 psig WOG, Cold Non-Shock. 150 psig Saturated Steam. Vacuum Service to 29 inches Hg. Federal Specification: WW-V-35C, Type: II, Composition: CS, Style: 1.
FEATURES
Full port configuration RPTFE seats and seals In-line repairable Actuator mounting pad (3/4 to 2) Nitride corrosion protection Blow-out-proof stem design Adjustable packing gland Cast components are investment castings 1-1/4 to 2 meet NACE with SS trim
VARIATIONS AVAILABLE:
83-140 Series (316 SS Ball & Stem)
OPTIONS AVAILABLE:
(SUFFIX) -02-03-04-07-08-10-14-15-16-18-19-21-23-24-27-32-35-45-47-48-58-59-60-63-P01-T01OPTION Static Grounded 1-1/4 Stem Extension 2-1/4 Stem Extension Tee Handle 90 Reversed Stem SS Lever & Nut Vented Ball (see page J-2) Round Handle Vertical Chain Lever Plain Yellow Grip Lock Plate UHMWPE Seats (Non-PTFE) Tank Flange Graphite Stem Packing Latch Lock Lever SS Tee Handle & Nut PTFE Trim Less Lever & Nut SS Latch-Lock Oval Handle SS Oval Handle Horizontal Chain Lever SS Body Trim Static Grounded Ball & Stem Female Threaded x Socket Weld BSPP (Parallel) Thread Connection BSPT (Tapered) Thread Connection SIZES 1/4 to 2 1/4 to 2 1/4 to 2 1/4 to 2 1/4 to 2 1/4 to 2 1/4 to 2 1/4 to 2 1/2 to 2 1/4 to 2 1/4 to 2 1/4 to 2 2 ONLY 1/4 to 2 1/2 to 2 1/4 to 2 1/4 to 2 1/4 to 2 1/2 to 2 1/4 to 2 1/2 to 2 1/4 to 2 1/4 to 2 1/2 to 2 1/4 to 2 1/4 to 2
1/00
B-11
83-200Socket Weld Ball Valve Series Carbon Steel 3-Piece Full Port
Socket Weld, 1000 psig WOG, Cold Non-Shock. 150 psig Saturated Steam. Vacuum Service to 29 inches Hg. Federal Specification: WW-V-35C, Type: II, Composition: CS, Style: 1.
FEATURES
Full port configuration RPTFE seats and stuffing box ring In-line repairable Actuator mounting pad (3/4 to 2) Nitride corrosion protection Blow-out-proof stem design Adjustable packing gland Investment Cast Components Meet NACE MR-01-75 with SS trim
VARIATIONS AVAILABLE:
83-240 Series (316 SS Ball & Stem)
OPTIONS AVAILABLE:
(SUFFIX) -02-03-04-07-08-10-14-15-16-18-19-21-23-24-27-32-35-45-47-48-58-59-60OPTION Static Grounded 1-1/4 Stem Extension 2-1/4 Stem Extension Tee Handle 90 Reversed Stem SS Lever & Nut Vented Ball (see page J-2) Round Handle Vertical Chain Lever Plain Yellow Grip Lock Plate UHMWPE Seats (Non-PTFE) Tank Flange Graphite Stem Packing Latch Lock Lever SS Tee Handle & Nut PTFE Trim Less Lever & Nut SS Latch-Lock Oval Handle SS Oval Handle Horizontal Chain Lever SS Body Trim Static Grounded Ball & Stem SIZES 1/2 to 2 1/2 to 2 1/2 to 2 1/2 to 2 1/2 to 2 1/2 to 2 1/2 to 2 1/2 to 2 1/2 to 2 1/2 to 2 1/2 to 2 1/2 to 2 2 ONLY 1/2 to 2 1/2 to 2 1/2 to 2 1/2 to 2 1/2 to 2 1/2 to 2 1/2 to 2 1/2 to 2 1/2 to 2 1/2 to 2
B-12
1/00
Standard Port, Threaded, 1500 psig WOG, Cold Non-Shock. 150 psig Saturated Steam. Vacuum Service to 29 inches Hg. Federal Specification: WW-V-35C, Type: II, Composition: CS, Style: 1.
FEATURES
Nitride corrosion protection Adjustable packing gland In-line repairable Blow-out-proof stem design (-29) certified to API 607 4TH ed. Class 600 burn Meets NACE MR-01-75 with SS trim Investment Cast Components Actuator mounting pad (1 to 2) RPTFE seats and seals
VARIATIONS AVAILABLE:
83-340 Series (316 SS Ball & Stem)
OPTIONS AVAILABLE:
(SUFFIX) -02-03-04-07-08-10-14-15-16-18-27-29-32-45-48-56-58-59-60-63-64-P01-T01OPTION Static Grounded 1-1/4 Stem Extension 2-1/4 Stem Extension Tee Handle 90 Reversed Stem SS Lever & Nut Vented Ball (see page J-2) Round Handle Vertical Chain Lever Plain Yellow Grip Latch Lock Lever Firesafe SS Tee Handle & Nut Less Lever & Nut SS Oval Handle Multifill Seats Horizontal Chain Lever SS Body Trim Static Grounded Ball & Stem Threaded x Solder 250 Lb. Steam Trim BSPP (Parallel) Thread Connection BSPT (Tapered) Thread Connection SIZES 1/2 to 2 1/2 to 2 1/2 to 2 1/2 to 2 1/2 to 2 1/2 to 2 1/2 to 2 1/2 to 2 3/4 to 2 1/2 to 2 1/2 to 2 1/2 to 2 1/2 to 2 1/2 to 2 1/2 to 2 1/2 to 2 3/4 to 2 1/2 to 2 1/2 to 2 1/2 to 2 1/2 to 2 1/2 to 2 1/2 to 2
1/00
B-13
83-400 Series
FEATURES
Nitride corrosion protection Adjustable packing gland In-line repairable Blow-out-proof stem design (-29) certified to API 607 4TH ed. Class 600 burn
Meets NACE MR-01-75 with SS trim Investment Cast Components Actuator mounting pad (1 to 2) RPTFE seats and seals
VARIATIONS AVAILABLE:
83-440 Series (316 SS Ball & Stem)
OPTIONS AVAILABLE:
(SUFFIX) -02-03-04-07-08-10-14-15-16-18-27-29-32-45-48-56-58-59-60-64OPTION Static Grounded 1-1/4 Stem Extension 2-1/4 Stem Extension Tee Handle 90 Reversed Stem SS Lever & Nut Vented Ball (see page J-2) Round Handle Vertical Chain Lever Plain Yellow Grip Latch Lock Lever Firesafe SS Tee Handle & Nut Less Lever & Nut SS Oval Handle Multifill Seats Horizontal Chain Lever SS Body Trim Static Grounded Ball & Stem 250 Lb. Steam Trim SIZES 1/2 to 2 1/2 to 2 1/2 to 2 1/2 to 2 1/2 to 2 1/2 to 2 1/2 to 2 1/2 to 2 3/4 to 2 1/2 to 2 3/4 to 2 1/2 to 2 1/2 to 2 1/2 to 2 1/2 to 2 1/2 to 2 3/4 to 2 1/2 to 2 1/2 to 2 1/2 to 2
B-14
1/00
Ball Valve
Threaded, 1500 psig WOG. Cold Non-Shock. 150 psig Saturated Steam. Vacuum Service to 29 inches Hg. Federal Specification: WW-V-35C, Type: II, Composition: CS, Style: 1.
FEATURES
Nitride corrosion protection (-29) Certified to API standard 607, Investment Cast Components Adjustable packing gland 4th Edition, Class 600 burn Actuator mounting pad (3/4 to 2) In-line repairable Meets NACE MR-01-75 with SS trim RPTFE seats and seals Blow-out-proof stem design
VARIATIONS AVAILABLE:
83-540 Series (316 SS Ball & Stem)
OPTIONS AVAILABLE:
(SUFFIX) -02-03-04-07-08-10-14-16-18-27-29-32-38-45-47-48-56-58-59-60-63-64-P01-T01OPTION Static Grounded 1-1/4 Stem Extension 2-1/4 Stem Extension Tee Handle 90 Reversed Stem SS Lever & Nut Vented Ball (see page J-2) Vertical Chain Lever Plain Yellow Grip Latch Lock Lever Firesafe SS Tee Handle & Nut PEEK Seats & Bearing Less Lever & Nut SS Latch-Lock Oval Handle SS Oval Handle Multifill Seats Horizontal Chain Lever SS Body Trim Static Grounded Ball & Stem Female Threaded x Socket Weld 250 Lb. Steam Trim BSPP (Parallel) Thread Connection BSPT (Tapered) Thread Connection SIZES 1/4 to 2 1/4 to 2 1/4 to 2 1/4 to 2 1/4 to 2 1/4 to 2 1/4 to 2 1/2 to 2 1/4 to 2 1/4 to 2 1/4 to 2 1/4 to 2 1/4 to 2 1/4 to 2 1/4 to 2 1/4 to 2 1/4 to 2 1/2 to 2 1/4 to 2 1/4 to 2 1/4 to 2 1/4 to 2 1/4 to 2 1/4 to 2
1/00
FEATURES
Nitride corrosion protection (-29) Certified to API standard 607, Investment Cast Components Adjustable packing gland 4th Edition, Class 600 burn Actuator mounting pad (3/4 to 2) In-line repairable Meets NACE MR-01-75 with SS trim RPTFE seats and seals Blow-out-proof stem design
VARIATIONS AVAILABLE:
83-640 Series (316 SS Ball & Stem)
OPTIONS AVAILABLE:
(SUFFIX) -02-03-04-07-08-10-14-15-16-18-27-29-32-38-45-47-48-56-58-59-60-64OPTION Static Grounded 1-1/4 Stem Extension 2-1/4 Stem Extension Tee Handle 90 Reversed Stem SS Lever & Nut Vented Ball (see page J-2) Round Handle Vertical Chain Lever Plain Yellow Grip Latch Lock Lever Firesafe SS Tee Handle & Nut PEEK Seats & Bearing Less Lever & Nut SS Latch-Lock Oval Handle SS Oval Handle Multifill Seats Horizontal Chain Lever SS Body Trim Static Grounded Ball & Stem 250 Lb. Steam Trim SIZES 1/2 to 2 1/2 to 2 1/2 to 2 1/2 to 2 1/2 to 2 1/2 to 2 1/2 to 2 1/2 to 2 1/2 to 2 1/2 to 2 1/2 to 2 1/2 to 2 1/2 to 2 1/2 to 2 1/2 to 2 1/2 to 2 1/4 to 2 1/2 to 2 1/2 to 2 1/2 to 2 1/2 to 2 1/2 to 2
B-16
1/00
83-700 Butt-Weld Ball Valve Series Carbon Steel 3-Piece Full Port
Schedule 40 Butt-Weld Ends. 1000 psig WOG. Cold Non-Shock. 150 psig Saturated Steam. Vacuum Service to 29 inches Hg. Federal Specification: WW-V-35C, Type: II, Composition: CS, Style: 1.
FEATURES
Full port configuration Adjustable packing In-line repairable Blow-out-proof stem design Nitride corrosion protection Meets NACE MR-01-75 with SS trim Investment Cast Components Actuator mounting pad (3/4 to 2) RPTFE seats and seals
VARIATIONS AVAILABLE:
83-740 Series (316 SS Ball & Stem)
OPTIONS AVAILABLE:
(SUFFIX) -02-03-04-07-08-10-14-15-16-18-19-21-23-24-27-32-35-45-47-48-58-59-60OPTION Static Grounded 1-1/4 Stem Extension 2-1/4 Stem Extension Tee Handle 90 Reversed Stem SS Lever & Nut Vented Ball (see page J-2) Round Handle Vertical Chain Lever Plain Yellow Grip Lock Plate UHMWPE Seats (Non-PTFE) Tank Flange Graphite Stem Packing Latch Lock Lever SS Tee Handle & Nut PTFE Trim Less Lever & Nut SS Latch-Lock Oval Handle SS Oval Handle Horizontal Chain Lever SS Body Trim Static Grounded Ball & Stem SIZES 1/2 to 2 1/2 to 2 1/2 to 2 1/2 to 2 1/2 to 2 1/2 to 2 1/2 to 2 1/2 to 2 1/2 to 2 1/2 to 2 1/2 to 2 1/2 to 2 2 ONLY 1/2 to 2 1/2 to 2 1/2 to 2 1/2 to 2 1/2 to 2 1/2 to 2 1/2 to 2 1/2 to 2 1/2 to 2 1/2 to 2
1/00
B-17
Standard Port Threaded, 1000 psig WOG, Cold Non-Shock. 150 psig Saturated Steam. Vacuum Service to 29 inches Hg. Federal Specification: WW-V-35C, Type: II, Composition: SS, Style: 1.
FEATURES
Meets NACE MR-01-75 Blow-out-proof stem design In-line repairable Adjustable packing gland Investment cast components Actuator mounting pad (1 to 2) RPTFE seats and seals
OPTIONS AVAILABLE:
(SUFFIX) -02-03-04-07-08-14-15-16-18-24-27-30-32-35-45-47-48-49-50-57-58-60-61-63-P01-T01OPTION Static Grounded 1-1/4 Stem Extension 2-1/4 Stem Extension Tee Handle 90 Reversed Stem Vented Ball (see page J-2) Round Handle Vertical Chain Lever Plain Yellow Grip Graphite Stem Packing Latch Lock Lever CamLock Handle SS Tee Handle & Nut PTFE Trim Less Lever & Nut SS Latch-Lock Oval Handle SS Oval Handle Assembled Dry 2-1/4 Locking Stem Extension Cleaned For Gaseous Oxygen Horizontal Chain Lever Static Grounded Ball & Stem Grounded Ball & Stem and Assembled Dry Threaded x Socket Weld BSPP (Parallel) Thread Connection BSPT (Tapered) Thread Connection SIZES 1/4 to 2 1/4 to 2 1/4 to 2 1/4 to 2 1/4 to 2 1/4 to 2 1/4 to 2 3/4 to 2 1/4 to 2 1/4 to 2 1/2 to 2 1/4 to 3/4 1/4 to 2 1/4 to 2 1/4 to 2 1/2 to 2 1/4 to 2 1/4 to 2 1/4 to 3/4 1/4 to 2 3/4 to 2 1/4 to 2 1/4 to 2 1/2 to 2 1/4 to 2 1/4 to 2
B-18
1/00
85-200 Series
FEATURES
Investment cast components Actuator mounting pad (1 to 2) RPTFE seats and seals
Meets NACE MR-01-75 Blow-out-proof stem design In-line repairable Adjustable packing gland
OPTIONS AVAILABLE:
(SUFFIX) -02-03-04-07-08-10-14-15-16-18-24-27-30-32-35-45-47-48-49-57-58-60OPTION Static Grounded 1-1/4 Stem Extension 2-1/4 Stem Extension Tee Handle 90 Reversed Stem SS Lever & Nut Vented Ball (see page J-2) Round Handle Vertical Chain Lever Plain Yellow Grip Graphite Stem Packing Latch Lock Lever CamLock Handle SS Tee Handle & Nut PTFE Trim Less Lever & Nut SS Latch-Lock Oval Handle SS Oval Handle Assembled Dry Cleaned For Gaseous Oxygen Horizontal Chain Lever Static Grounded Ball & Stem SIZES 1/2 to 2 1/2 to 2 1/2 to 2 1/2 to 2 1/2 to 2 1/2 to 2 1/2 to 2 1/2 to 2 3/4 to 2 1/2 to 2 1/2 to 2 1/2 to 2 1/2 to 3/4 1/2 to 2 1/2 to 2 1/2 to 2 1/2 to 2 1/2 to 2 1/2 to 2 1/2 to 2 3/4 to 2 1/2 to 2
1/00
B-19
86-100 Series
FEATURES
Investment cast components Actuator mounting pad (3/4 to 2) RPTFE seats and seals Full port configuration
AAR Approved Blow-out-proof stem design In-line repairable Adjustable packing gland Meets NACE MR-01-75
OPTIONS AVAILABLE:
(SUFFIX) -02-03-04-07-08-14-15-16-18-19-21-23-24-27-30-32-35-45-48-49-57-58-60-63-P01-T01OPTION Static Grounded 1-1/4 Stem Extension 2-1/4 Stem Extension Tee Handle 90 Reversed Stem Vented Ball (see page J-2) Round Handle Vertical Chain Lever Plain Yellow Grip Lock Plate UHMWPE Seats (Non-PTFE) Tank Flange Graphite Stem Packing Latch Lock Lever CamLock Handle SS Tee Handle & Nut PTFE Trim Less Lever & Nut SS Oval Handle Assembled Dry Cleaned For Gaseous Oxygen Horizontal Chain Lever Static Grounded Ball & Stem Threaded x Socket Weld BSPP (Parallel) Thread Connection BSPT (Tapered) Thread Connection SIZES 1/4 to 3 1/4 to 3 1/4 to 3 1/4 to 3 1/4 to 3 1/4 to 3 1/4 to 3 1/2 to 3 1/4 to 3 1/4 to 3 1/4 to 3 2 ONLY 1/4 to 3 1/2 to 3 1/2 ONLY 1/4 to 3 1/4 to 3 1/4 to 3 1/4 to 2 1/4 to 3 1/4 to 3 1/2 to 3 1/4 to 3 3/8 to 3 1/4 to 3 1/4 to 3
B-20
86-200 Series
FEATURES
Investment cast components Actuator mounting pad (3/4 to 2) RPTFE seats and seals Full port configuration
AAR Approved Blow-out-proof stem design In-line repairable Adjustable packing gland Meets NACE MR-01-75
OPTIONS AVAILABLE:
(SUFFIX) -02-03-04-07-08-14-15-16-18-19-21-23-24-27-30-32-35-45-48-49-57-58-60OPTION Static Grounded 1-1/4 Stem Extension 2-1/4 Stem Extension Tee Handle 90 Reversed Stem Vented Ball (see page J-2) Round Handle Vertical Chain Lever Plain Yellow Grip Lock Plate UHMWPE Seats (Non-PTFE) Tank Flange Graphite Stem Packing Latch Lock Lever CamLock Handle SS Tee Handle & Nut PTFE Trim Less Lever & Nut SS Oval Handle Assembled Dry Cleaned For Gaseous Oxygen Horizontal Chain Lever Static Grounded Ball & Stem SIZES 3/8 to 3 3/8 to 2 3/8 to 2 3/8 to 2 3/8 to 3 3/8 to 3 3/8 to 2 1/2 to 2 3/8 to 2 3/8 to 2 3/8 to 3 2 ONLY 3/8 to 3 3/8 to 2 1/2 ONLY 3/8 to 2 3/8 to 3 3/8 to 3 3/8 to 2 3/8 to 3 3/8 to 3 1/2 to 3 3/8 to 3
1/00
B-21
86-500 Series
FEATURES
Investment Cast Components Actuator mounting pad (3/4 to 2) RPTFE seats and seals
Adjustable packing gland (-29) Certified to API standard 607, In-line repairable 4th Edition, Class 600 burn Blow-out-proof stem design Meets NACE MR-01-75
OPTIONS AVAILABLE:
(SUFFIX) -02-03-04-07-08-14-15-16-18-27-29-32-38-45-47-48-49-56-57-58-60-63-64-66-P01-T01OPTION Static Grounded 1-1/4 Stem Extension 2-1/4 Stem Extension Tee Handle 90 Reversed Stem Vented Ball (see page J-2) Round Handle Vertical Chain Lever Plain Yellow Grip Latch Lock Lever Firesafe SS Tee Handle & Nut PEEK Seats and Bearing Less Lever & Nut SS Latch-Lock Oval Handle SS Oval Handle Assembled Dry Multifull Seats Cleaned for Gaseous Oxygen Horizontal Chain Lever Static Grounded Ball & Stem Threaded x Socket Weld 250 Lb. Steam Trim NPT x Butt Weld BSPP (Parallel) Thread Connection BSPT (Tapered) Thread Connection SIZES 1/4 to 2 1/4 to 2 1/4 to 2 1/4 to 2 1/4 to 2 1/4 to 2 1/4 to 2 1/2 to 2 1/4 to 2 1/4 to 2 1/4 to 2 1/4 to 2 1/4 to 2 1/4 to 2 1/4 to 2 1/4 to 2 1/4 to 2 1/4 to 2 1/4 to 2 1/2 to 2 1/4 to 2 1/2 to 2 1/4 to 2 1/2 to 2 1/4 to 2 1/4 to 2
B-22
1/00
86-600 Series
FEATURES
Stainless Steel 3-Piece High Pressure Full Port Socket Weld Ball Valve
Socket Weld, 1500 psig WOG, Cold Non-Shock. 150 psig Saturated Steam. Vacuum Service to 29 inches Hg. Federal Specification: WW-V-35C, Type: II, Composition: SS, Style: 1.
Adjustable packing gland In-line repairable Blow-out-proof stem design (-29) certified to API 607 4TH ed. Class 600 burn
Meets NACE MR-01-75 Investment Cast Components Actuator mounting pad (3/4 to 2) RPTFE seats and seals
8. Gland nut 9. Stem 10. Lever nut 11. Body bolt (4) 12. Hex nut (4) 13. Body 14. Body seal (2)
OPTIONS AVAILABLE:
(SUFFIX) -02-03-04-07-08-14-15-16-18-27-29-32-38-45-48-49-56-57-58-60-64OPTION Static Grounded 1-1/4 Stem Extension 2-1/4 Stem Extension Tee Handle 90 Reversed Stem Vented Ball (see page J-2) Round Handle Vertical Chain Lever Plain Yellow Grip Latch Lock Lever Firesafe SS Tee Handle & Nut PEEK Seats and Bearing Less Lever & Nut SS Oval Handle Assembled Dry Multifill Seats Cleaned for Gaseous Oxygen Horizontal Chain Lever Static Grounded Ball & Stem 250 Lb. Steam Trim SIZES 1/2 to 2 1/2 to 2 1/2 to 2 1/2 to 2 1/2 to 2 1/2 to 2 1/2 to 2 1/2 to 2 1/2 to 2 1/2 to 2 1/2 to 2 1/2 to 2 1/2 to 2 1/2 to 2 1/2 to 2 1/2 to 2 1/2 to 2 1/2 to 2 1/2 to 2 1/2 to 2 1/2 to 2
STAINLESS STEEL 3-PIECE HIGH PRESSURE FULL PORT SOCKET WELD BALL VALVE
NUMBER 86-603-01 86-604-01A 86-605-01A 86-606-01A 86-607-01A 86-608-01A SIZE 1/2 3/4 1 1-1/4 1-1/2 2 A .62 .81 1.00 1.25 1.50 2.00 B 1.69 1.93 2.25 2.43 2.62 3.12 C 3.38 3.87 4.50 4.87 5.25 6.25 D 2.00 2.18 2.62 2.87 3.35 3.75 E 4.81 4.81 5.50 5.50 8.00 8.00 F N/A 1.25 1.62 1.62 1.62 1.62 G N/A 1/4-20 5/16-18 5/16-18 5/16-18 5/16-18 H .855 1.065 1.330 1.675 1.915 2.406 I .43 .56 .68 .81 .87 1.06
1/00
B-23
86-700 Series
FEATURES
Investment cast components Actuator mounting pad (3/4 to 2) RPTFE seats and seals Full port configuration
AAR Approved Adjustable packing gland In-line repairable Blow-out-proof stem design Meets NACE MR-01-75
OPTIONS AVAILABLE:
(SUFFIX) -02-03-04-07-08-14-15-16-18-21-23-24-27-30-32-35-45-48-49-57-58-60OPTION Static Grounded 1-1/4 Stem Extension 2-1/4 Stem Extension Tee Handle 90 Reversed Stem Vented Ball (see page J-2) Round Handle Vertical Chain Lever Plain Yellow Grip UHMWPE Seats (Non-PTFE) Tank Flange Graphite Stem Packing Latch Lock Lever CamLock Handle SS Tee Handle & Nut PTFE Trim Less Lever & Nut SS Oval Handle Assembled Dry Cleaned For Gaseous Oxygen Horizontal Chain Lever Static Grounded Ball & Stem SIZES 1/2 to 2 1/2 to 2 1/2 to 2 1/2 to 2 1/2 to 2 1/2 to 2 1/2 to 2 1/2 to 2 1/2 to 2 1/2 to 2 2 ONLY 1/2 to 2 1/2 to 2 1/2ONLY 1/2 to 2 1/2 to 2 1/2 to 2 1/2 to 2 1/2 to 2 1/2 to 2 1/2 to 2 1/2 to 2
B-24
1/00
86-900 Series
FEATURES
Stainless Steel 3-Piece High Pressure Full Port Butt-Weld Ball Valve
Schedule 10 Butt-Weld, 1500 psig WOG, Cold Non-Shock. 150 psig Saturated Steam. Vacuum Service to 29 inches Hg. Federal Specification: WW-V-35C, Type: II, Composition: SS, Style: 1.
Adjustable packing gland In-line repairable Blow-out-proof stem design (-29) Certified to API standard 607, 4th Edition, Class 600 burn
Meets NACE MR-01-75-97 Investment Cast Components Actuator mounting pad (3/4 to 2) RPTFE seats and seals
OPTIONS AVAILABLE:
(SUFFIX) -02-03-04-07-08-14-15-16-18-27-29-32-35-38-45-47-48-49-57-58-60-64OPTION Static Grounded 1-1/4 Stem Extension 2-1/4 Stem Extension Tee Handle 90 Reversed Stem Vented Ball (see page J-2) Round Handle Vertical Chain Lever Plain Yellow Grip Latch Lock Lever Firesafe SS Tee Handle & Nut PTFE Trim PEEK Seats and Bearing Less Lever & Nut SS Latch-Lock Oval Handle SS Oval Handle Assembled Dry Cleaned For Gaseous Oxygen Horizontal Chain Lever Static Grounded Ball & Stem 250 lb. Steam Trim SIZES 1/2 to 2 1/2 to 2 1/2 to 2 1/2 to 2 1/2 to 2 1/2 to 2 1/2 to 2 1/2 to 2 1/2 to 2 1/2 to 2 1/2 to 2 1/2 to 2 1/2 to 2 1/2 to 2 1/2 to 2 1/2 to 2 1/2 to 2 1/2 to 2 1/2 to 2 1/2 to 2 1/2 to 2 1/2 to 2
STAINLESS STEEL 3-PIECE HIGH PRESSURE FULL PORT BUTT-WELD BALL VALVE
NUMBER SIZE A 86-903-01 1/2 .62 86-904-01A 3/4 .81 86-905-01A 1 1.00 86-907-01A 1-1/2 1.50 86-908-01A 2 2.00 B 1.69 1.93 2.25 2.62 3.11 C 3.38 3.87 4.50 5.25 6.22 D 2.00 2.18 2.62 3.35 3.75 E 4.81 4.81 5.50 8.00 8.00 F N/A 1.25 1.62 1.62 1.62 G N/A 1/4-20 5/16-18 5/16-18 5/16-18 Wt. 1.60 2.24 3.32 8.62 15.60
1/00
B-25
401-100 Series
FEATURES
Investment cast components Actuator mounting pad (3/4 to 2) RPTFE seats and seals Full port configuration
Blow-out-proof stem design In-line repairable Adjustable packing gland Meets NACE MR-01-75
OPTIONS AVAILABLE:
(SUFFIX) -02-03-04-07-08-14-15-16-18-19-21-24-27-30-32-35-45-48-49-57-58-60-63-P01-T01OPTION Static Grounded 1-1/4 Stem Extension 2-1/4 Stem Extension Tee Handle 90 Reversed Stem Vented Ball (see page J-2) Round Handle Vertical Chain Lever Plain Yellow Grip Lock Plate UHMWPE Seats (Non-PTFE) Graphite Stem Packing Latch Lock Lever CamLock Handle SS Tee Handle & Nut PTFE Trim Less Lever & Nut SS Oval Handle Assembled Dry Cleaned For Gaseous Oxygen Horizontal Chain Lever Static Grounded Ball & Stem Female Threaded x Socket Weld BSPP (Parallel) Thread Connection BSPT (Tapered) Thread Connection SIZES 1/2 to 2 1/2 to 2 1/2 to 2 1/2 to 2 1/2 to 2 1/2 to 2 1/2 to 2 1/2 to 2 1/2 to 2 1/2 to 2 1/2 to 2 1/2 to 2 1/2 to 2 1/2ONLY 1/2 to 2 1/2 to 2 1/2 to 2 1/2 to 2 1/2 to 2 1/2 to 2 1/2 to 2 1/2 to 2 1/2 to 2 1/2 to 2 1/2 to 2
B-26
1/00
401-200 Series
FEATURES
Investment cast components Actuator mounting pad (3/4 to 2) RPTFE seats and seals Full port configuration
Blow-out-proof stem design In-line repairable Adjustable packing gland Meets NACE MR-01-75
OPTIONS AVAILABLE:
(SUFFIX) -02-03-04-07-08-14-15-16-18-19-21-24-27-30-32-35-45-48-49-57-58-60OPTION Static Grounded 1-1/4 Stem Extension 2-1/4 Stem Extension Tee Handle 90 Reversed Stem Vented Ball (see page J-2) Round Handle Vertical Chain Lever Plain Yellow Grip Lock Plate UHMWPE Seats (Non-PTFE) Graphite Stem Packing Latch Lock Lever CamLock Handle SS Tee Handle & Nut PTFE Trim Less Lever & Nut SS Oval Handle Assembled Dry Cleaned For Gaseous Oxygen Horizontal Chain Lever Static Grounded Ball & Stem SIZES 1/2 to 2 1/2 to 2 1/2 to 2 1/2 to 2 1/2 to 2 1/2 to 2 1/2 to 2 1/2 to 2 1/2 to 2 1/2 to 2 1/2 to 2 1/2 to 2 1/2 to 2 1/2 ONLY 1/2 to 2 1/2 to 2 1/2 to 2 1/2 to 2 1/2 to 2 1/2 to 2 1/2 to 2 1/2 to 2
1/00
B-27
SECTION E CONTENTS
THREE WAY VALVES
DESCRIPTION
70-600 Series, Threaded Bronze 70-900 Series, Solder Bronze 76-600 Series, Threaded Stainless Steel 3-Way Valve Application
PAGE
E-1 E-2 E-3 E-4
70-600 Series
FEATURES
Blow-out-proof stem design Adjustable packing gland
VARIATIONS AVAILABLE:
70-640 Series (316 SS Ball & Stem)
OPTIONS AVAILABLE:
(SUFFIX) -02-03-04-05-10-17-21-24-27-35-49-50-56-57-60-P01-T01OPTION Static Grounded 1-1/4" Stem Extension 2-1/4" Stem Extension Plain Ball SS Lever & Nut Rough Chrome Plating UHMWPE Seats (Non-PTFE) Graphite Stem Packing Latch Lock Lever PTFE Trim Assembled Dry 2-1/4 Locking Stem Extension Multifill Seats Cleaned for Gaseous Oxygen Static Grounded Ball & Stem BSPP (Parallel) Thread Connection BSPT (Tapered) Thread Connection SIZES 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2"
FLOW PATTERN
1/00
E-1
70-900 Series
FEATURES
Blow-out-proof stem design Adjustable packing gland
VARIATIONS AVAILABLE:
70-940 Series (316 SS Ball & Stem)
OPTIONS AVAILABLE:
(SUFFIX) -02-03-04-05-10-17-21-24-27-35-49-50-56-57-60OPTION Static Grounded 1-1/4" Stem Extension 2-1/4" Stem Extension Plain Ball SS Lever & Nut Rough Chrome Plating UHMWPE Seats (Non-PTFE) Graphite Stem Packing Latch Lock Lever PTFE Trim Assembled Dry 2-1/4 Locking Stem Extension Multifill Seats Cleaned for Gaseous Oxygen Static Grounded Ball & Stem SIZES 1/2" to 1" 1/2" to 1" 1/2" to 1" 1/2" to 1" 1/2" to 1" 1/2" to 1" 1/2" to 1" 1/2" to 1" 1/2" to 1" 1/2" to 1" 1/2" to 1" 1/2" to 1" 1/2" to 1" 1/2" to 1" 1/2" to 1"
FLOW PATTERN
NOTE: Open port pressure must exceed Closed port pressure. The 70-900 is designed to be soft soldered into lines without disassembly. This allows a tested valve to be installed without disturbing the seats and seals in any way. Soldering temperature not to exceed 500F.
E-2
76-600 Series
FEATURES
Blow-out-proof stem design Adjustable packing gland Investment cast body
OPTIONS AVAILABLE:
(SUFFIX) -02-03-04-21-24-27-35-49-50-56-57-60-P01-T01OPTION Static Grounded 1-1/4" Stem Extension 2-1/4" Stem Extension UHMWPE Seats (Non-PTFE) Graphite Stem Packing Latch Lock Lever PTFE Trim Assembled Dry 2-1/4 Locking Stem Extension Multifill Seats Cleaned for Gaseous Oxygen Static Grounded Ball & Stem BSPP (Parallel) Thread Connection BSPT (Tapered) Thread Connection SIZES 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2"
FLOW PATTERN
1/00
E-3
3-Way Valves
E-4
SECTION F CONTENTS
UNION END VALVES
DESCRIPTION
70-300 Series, Threaded Bronze, Single Union End 70-400 Series, Solder Bronze, Single Union End 73-300 Series, Threaded Carbon Steel, Double Union End (UL Listed) 73-400 Series, Socket Weld Carbon Steel, Double Union End (UL Listed) 76-300 Series, Threaded Stainless Steel, Double Union End 76-400 Series, Socket Weld Stainless Steel, Double Union End
PAGE
F-1 F-2 F-3 F-4 F-5 F-6
70-300 Series
FEATURES
Blow-out-proof stem design Adjustable packing gland
Chromium plated ball RPTFE seats and stuffing box ring Fluorocarbon O-Ring sealed single union requires only light torque to seal
VARIATIONS AVAILABLE:
70-320 Series (Adjustable Stop Lever) 70-340 Series (316 SS Ball & Stem) 70-350 Series (Balancing Stop)
OPTIONS AVAILABLE:
(SUFFIX) -02-03-04-05-07-08-10-14-15-16-17-18-20-21-24-27-30-32-35-45-46-48-49-50-56-57-58-60-63OPTION Static Grounded 1-1/4" Stem Extension 2-1/4" Stem Extension Plain Ball Tee Handle 90 Reversed Stem SS Lever & Nut Vented Ball(see page J-2) Round Handle Vertical Chain Lever Rough Chrome Plating Plain Yellow Grip Slot Vented Ball UHMWPE Seats (Non-PTFE) Graphite Stem Packing Latch Lock Lever CamLock Handle SS Tee Handle & Nut PTFE Trim Less Lever & Nut Latch Lock Lever - Lock Close Only SS Oval Handle Assembled Dry 2-1/4 Locking Stem Extension Multifill Seats Cleaned for Gaseous Oxygen Horizontal Chain Lever Static Grounded Ball & Stem Threaded x Solder Tailpiece SIZES 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 3/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 3/4" to 2" 1/4" to 2" 3/8" to 2"
70-400 Series
FEATURES
Blow-out-proof stem design Adjustable packing gland
Chromium plated ball RPTFE seats and stuffing box ring Fluorocarbon O-Ring sealed single union requires only light torque to seal
VARIATIONS AVAILABLE:
70-420 Series (Adjustable Stop Lever) 70-440 Series (316 SS Ball & Stem) 70-450 Series (Balancing Stop)
The 70-400 is designed to be soft soldered into lines without disassembly. This allows a tested valve to be installed without disturbing the seats and seals in any way. Soldering temperature not to exceed 500F.
OPTIONS AVAILABLE:
(SUFFIX) -02-03-04-05-07-08-10-14-15-16-17-18-20-21-24-27-30-32-35-45-46-48-49-50-56-57-58-60-63OPTION Static Grounded 1-1/4" Stem Extension 2-1/4" Stem Extension Plain Ball Tee Handle 90 Reversed Stem SS Lever & Nut Vented Ball(see page J-2) Round Handle Vertical Chain Lever Rough Chrome Plating Plain Yellow Grip Slot Vented Ball UHMWPE Seats (Non-PTFE) Graphite Stem Packing Latch Lock Lever CamLock Handle SS Tee Handle & Nut PTFE Trim Less Lever & Nut Latch Lock Lever - Lock Close Only SS Oval Handle Assembled Dry 2-1/4 Locking Stem Extension Multifill Seats Cleaned for Gaseous Oxygen Horizontal Chain Lever Static Grounded Ball & Stem Threaded x Solder Tailpiece SIZES 3/8" to 2" 3/8" to 2" 3/8" to 2" 3/8" to 2" 3/8" to 2" 3/8" to 2" 3/8" to 2" 3/8" to 2" 3/8" to 2" 3/4" to 2" 3/8" to 2" 3/8" to 2" 3/8" to 2" 3/8" to 2" 3/8" to 2" 3/8" to 2" 3/8" to 2" 3/8" to 2" 3/8" to 2" 3/8" to 2" 3/8" to 2" 3/8" to 2" 3/8" to 2" 3/8" to 2" 3/8" to 2" 3/8" to 2" 3/4" to 2" 3/8" to 2" 3/8" to 2"
F-2
73-300 Series
FEATURES
Blow-out-proof stem design Adjustable packing gland Chromium plated ball Nitride corrosion protection
Heavy duty quarter turn lever RPTFE seats and seals Steel barstock design Easy installation and maintenance
UL
LISTED
Guide YRPV: Gas shutoff valve for use with natural and manufactured gases. Guide YSDT: LP gas shutoff valve. Guide YRBX: Flammable liquid shutoff valve. Note: Listings apply ONLY to the standard -01 valves.
VARIATIONS AVAILABLE:
73-340 Series (316 SS Ball & Stem)
OPTIONS AVAILABLE:
(SUFFIX) -02-07-08-10-14-15-18-19-22-29-45-60-63-64-P01-T01OPTION Static Grounded Tee Handle 90 Reversed Stem SS Lever & Nut Vented Ball(see page J-2) Round Handle Plain Yellow Grip Lock Plate Fluorocarbon Union Seals Firesafe Less Lever & Nut Static Grounded Ball & Stem Threaded x Socket Weld 250 Lb. Steam Trim BSPP (Parallel) Thread Connection BSPT (Tapered) Thread Connection SIZES 1/4" to 2" 1/4" to 1-1/2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 1" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/2" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2"
73-400 Series
FEATURES
Blow-out-proof stem design Adjustable packing gland Chromium plated ball Nitride corrosion protection
Heavy duty quarter turn lever RPTFE seats and seals Steel barstock design Easy installation and maintenance
UL
LISTED
Guide YRPV: Gas shutoff valve for use with natural and manufactured gases. Guide YSDT: LP gas shutoff valve. Guide YRBX: Flammable liquid shutoff valve. Note: Listings apply ONLY to the standard -01 valves.
VARIATIONS AVAILABLE:
73-440 Series (316 SS Ball & Stem)
OPTIONS AVAILABLE:
(SUFFIX) -02-07-08-10-14-15-18-19-22-29-45-60-64OPTION Static Grounded Tee Handle 90 Reversed Stem SS Lever & Nut Vented Ball(see page J-2) Round Handle Plain Yellow Grip Lock Plate Fluorocarbon Union Seals Firesafe Less Lever & Nut Static Grounded Ball & Stem 250 Lb. Steam Trim SIZES 1/2" to 2" 1/2" to 1-1/2" 1/2" to 2" 1/2" to 2" 1/2" to 2" 1/2" to 1" 1/2" to 2" 1/2" to 2" 1/2" to 2" 1/2" to 2" 1/2" to 2" 1/2" to 2" 1/2" to 2"
F-4
76-300 Series
FEATURES
Blow-out-proof stem design Adjustable packing gland
OPTIONS AVAILABLE:
(SUFFIX) -02-03-04-07-08-14-15-18-22-27-29-32-33-45-46-49-57-60-63-64-P01-T01OPTION Static Grounded 1-1/4" Stem Extension 2-1/4" Stem Extension Tee Handle 90 Reversed Stem Vented Ball(see page J-2) Round Handle Plain Yellow Grip Fluorocarbon Union Seals Latch Lock Lever Firesafe SS Tee Handle & Nut Drilled and Tapped for Actuator Mounting Less Lever & Nut Latch Lock Lever - Lock Close Only Assembled Dry Cleaned for Gaseous Oxygen Static Grounded Ball & Stem Threaded x Solder 250 Lb. Steam Trim BSPP (Parallel) Thread Connection BSPT (Tapered) Thread Connection SIZES 1/2" to 2" 1/2" to 1-1/2" 1/2" to 1-1/2" 1/2" to 1-1/2" 1/2" to 2" 1/2" to 2" 1/2" to 1-1/2" 1/2" to 2" 1/2" to 2" 1/2" to 1-1/2" 1/2" to 2" 1/2" to 1-1/2" 1/2" to 2" 1/2" to 2" 1/2" to 1-1/2" 1/2" to 2" 1/2" to 2" 1/2" to 2" 1/2" to 2" 1/2" to 2" 1/2" to 2" 1/2" to 2"
For Pressure/Temperature Ratings, Refer to Page N-15, Graph No. 14 (1/2 to 1) Refer to Page N-14, Graph No.12 (1-1/4 to 2)
76-400 Series
FEATURES
Blow-out-proof stem design Adjustable packing gland
OPTIONS AVAILABLE:
(SUFFIX) -02-03-04-07-08-14-15-18-22-27-29-32-33-45-46-49-57-60-64OPTION Static Grounded 1-1/4" Stem Extension 2-1/4" Stem Extension Tee Handle 90 Reversed Stem Vented Ball(see page J-2) Round Handle Plain Yellow Grip Fluorocarbon Union Seals Latch Lock Lever Firesafe SS Tee Handle & Nut Drilled and Tapped for Actuator Mounting Less Lever & Nut Latch Lock Lever - Lock Close Only Assembled Dry Cleaned for Gaseous Oxygen Static Grounded Ball & Stem 250 Lb. Steam Trim SIZES 1/2" to 2" 1/2" to 1-1/2" 1/2" to 1-1/2" 1/2" to 1-1/2" 1/2" to 2" 1/2" to 2" 1/2" to 1-1/2" 1/2" to 2" 1/2" to 2" 1/2" to 1-1/2" 1/2" to 2" 1/2" to 2" 1/2" to 2" 1/2" to 2" 1/2" to 1-1/2" 1/2" to 2" 1/2" to 2" 1/2" to 2" 1/2" to 2"
For Pressure/Temperature Ratings, Refer to Page N-15, Graph No. 14 (1/2 to 1) Refer to Page N-14, Graph No.12 (1-1/4 to 2)
F-6
SECTION G CONTENTS
STEAM PREP BALL VALVES
DESCRIPTION
70-140-64 Series, Threaded Bronze 71-140-64 Series, Threaded Bronze with Mounting Pad 72-140-64 Series, Threaded High Pressure Carbon Steel 73A-140-64 Series, Threaded A105 Carbon Steel 73-340-64 Series, Threaded Double Union End Carbon Steel 73-440-64 Series, Socket Weld Double Union End Carbon Steel 76-100-64 Series, Threaded Stainless Steel with Mounting Pad 76-300-64 Series, Threaded Double Union End Stainless Steel 76-400-64 Series, Socket Weld Double Union End Stainless Steel 83-540-64 Series, Threaded High Pressure Full Port Carbon Steel with Mounting Pad 86-500-64 Series, Threaded High Pressure Full Port Stainless Steel with Mounting Pad 89-140-64 Series, Threaded Carbon Steel with Mounting Pad 7M-140-64 Series, Threaded Bronze with Drain & Mounting Pad
PAGE
G-1 G-2 G-3 G-4 G-5 G-6 G-7 G-8 G-9 G-10
G-11
G-12 G-13
70-140-64 Series
FEATURES
Blow-out-proof stem design Adjustable packing gland
316 SS ball and stem Multifill seats Multifill stuffing box ring
Valves with -64 trim feature a yellow vinyl grip with distinctive red lettering. These valves are recommended for saturated steam to 250 psig. They are also recommended for services with fluids with widely varying temperatures and / or high thermal expansion rates.
71-140-64 Series
FEATURES
Blow-out-proof stem design Adjustable packing gland Multifill packing
316 SS ball and stem Multifill seats Mounting pad for easy actuator mounting
Valves with -64 trim feature a yellow vinyl grip with distinctive red lettering. These valves are recommended for saturated steam to 250 psig. They are also recommended for services with fluids with widely varying temperatures and / or high thermal expansion rates.
G-2
72-140-64 Series
FEATURES
Adjustable packing gland Full port, except 2" Blow-out-proof stem design Heavy duty handles
Barstock design 316 SS ball and stem Multifill packing Multifill seats Nitride corrosion protection
Valves with -64 trim feature a yellow vinyl grip with distinctive red lettering. These valves are recommended for saturated steam to 250 psig. They are also recommended for services with fluids with widely varying temperatures and / or high thermal expansion rates.
73A-140-64 Series
FEATURES
Raised handle stops Blow-out-proof stem design Adjustable packing gland Nitride corrosion protection 316 SS ball & stem
Valves with -64 trim feature a yellow vinyl grip with distinctive red lettering. These valves are recommended for saturated steam to 250 psig. They are also recommended for services with fluids with widely varying temperatures and / or high thermal expansion rates.
For Pressure/Temperature Ratings, Refer to Page N-15, Graph No. 13 (1/4 to 1) Refer to Page N-14, Graph No. 11 (1-1/4 to 2)
G-4
73-340-64 Series
FEATURES
Blow-out-proof stem design 316 SS ball and stem Steel barstock design Multifill packing Multifill seats Nitride corrosion protection
Carbon Steel 250 Lb. Steam Double Union End Ball Valve
Threaded End, 3000 psig WOG, Cold Non-Shock, 250 psig Saturated Steam. Vacuum Service to 29 inches Hg. Federal Specification: WW-V-35C, Type: II, Composition: CS, Style: 1.
Heavy duty quarter turn handles Adjustable packing gland Easy installation and maintenance
Valves with -64 trim feature a yellow vinyl grip with distinctive red lettering. These valves are recommended for saturated steam to 250 psig. They are also recommended for services with fluids with widely varying temperatures and / or high thermal expansion rates.
73-440-64 Series
FEATURES
Carbon Steel 250 Lb. Steam Double Union End Socket Weld Ball Valve
Socket Weld, 3000 psig WOG, Cold Non-Shock, 250 psig Saturated Steam. Vacuum Service to 29 inches Hg. Federal Specification: WW-V-35C, Type: II, Composition: CS, Style: 1.
Heavy duty quarter turn handles Adjustable packing gland Easy installation and maintenance
Blow-out-proof stem design 316 SS ball and stem Steel barstock design
Valves with -64 trim feature a yellow vinyl grip with distinctive red lettering. These valves are recommended for saturated steam to 250 psig. They are also recommended for services with fluids with widely varying temperatures and / or high thermal expansion rates.
CARBON STEEL 250 Lb. STEAM DOUBLE UNION END SOCKET WELD BALL VALVE
NUMBER SIZE 73-443-64 1/2" 73-444-64 3/4" 73-445-64 1" 73-446-64 1-1/4" 73-447-64 1-1/2" 73-448-64 2" A .62 .81 1.00 1.25 1.50 1.75 B 2.50 2.71 2.96 2.87 3.46 3.75 C 5.00 5.31 6.06 6.12 7.12 7.50 D 2.50 2.62 3.12 3.43 3.56 4.18 E 5.62 5.62 6.62 8.00 8.00 9.00 F .43 .56 .68 .81 .87 1.06 G .855 1.065 1.330 1.675 1.915 2.406 Wt. 3.35 4.48 7.04 9.96 14.83 20.50
G-6
76-100-64 Series
FEATURES
Blow-out-proof stem design Multifill packing 316 SS ball and stem Multifill seats Mounting pad for easy actuator mounting
Valves with -64 trim feature a yellow vinyl grip with distinctive red lettering. These valves are recommended for saturated steam to 250 psig. They are also recommended for services with fluids with widely varying temperatures and / or high thermal expansion rates.
For Pressure/Temperature Ratings, Refer to Page N-15, Graph No. 14 (1/4 to 1) Refer to Page N-14, Graph No. 12 (1-1/4 to 2) Refer to Page N-14, Graph No. 8 (2-1/2 to 3) G-7
76-300-64 Series
FEATURES
Stainless Steel 250 Lb. Steam Double Union End Ball Valve
Threaded, 1/2"-1" 2000 psig WOG, 1-1/4" to 2" 1500 psig WOG. Cold Non-Shock. 250 psig Saturated Steam, Vacuum Service to 29 inches Hg. Federal Specification: WW-V-35C, Type: II, Composition: SS, Style: 1.
Multifill packing
Valves with -64 trim feature a yellow vinyl grip with distinctive red lettering. These valves are recommended for saturated steam to 250 psig. They are also recommended for services with fluids with widely varying temperatures and / or high thermal expansion rates.
STAINLESS STEEL 250 Lb. STEAM DOUBLE UNION END BALL VALVE
NUMBER SIZE 76-303-64 1/2" 76-304-64 3/4" 76-305-64 1" 76-306-64 1-1/4" 76-307-64 1-1/2" 76-308-64 2" A .62 .81 1.00 1.25 1.50 1.75 B 2.27 2.46 2.89 2.88 2.43 3.75 C 4.33 4.51 5.45 5.32 6.43 6.87 D 2.12 2.31 2.75 2.97 3.39 4.12 E 4.87 4.87 5.50 5.50 7.87 9.87 Wt. 2.88 3.81 5.98 8.47 12.61 16.88
For Pressure/Temperature Ratings, Refer to Page N-15, Graph No. 14 (1/2 to 1) Refer to Page N-14, Graph No. 12 (1-1/4 to 2)
G-8
76-400-64 Series
FEATURES
Stainless Steel 250 Lb. Steam Double Union End Socket Weld Ball Valve
Socket Weld, 1/2" to 1" 2000 psig WOG, 1-1/4" to 2" 1500 psig WOG. Cold Non-Shock. 250 psig Saturated Steam, Vacuum Service to 29 inches Hg. Federal Specification: WW-V-35C, Type: II, Composition: SS, Style: 1.
Multifill packing
Valves with -64 trim feature a yellow vinyl grip with distinctive red lettering. These valves are recommended for saturated steam to 250 psig. They are also recommended for services with fluids with widely varying temperatures and / or high thermal expansion rates.
STAINLESS STEEL 250 Lb. STEAM DOUBLE UNION END SOCKET WELD BALL VALVE
NUMBER 76-403-64 76-404-64 76-405-64 76-406-64 76-407-64 76-408-64 SIZE 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" A .62 .81 1.00 1.25 1.50 1.75 B 2.27 2.46 2.89 2.88 2.43 3.75 C 4.33 4.51 5.45 5.32 6.43 6.87 D 2.12 2.31 2.75 2.97 3.39 4.12 E 4.87 4.87 5.50 5.50 7.87 9.87 F .43 .56 .68 .81 .87 1.06 G .855 1.065 1.330 1.675 1.915 2.406 Wt. 2.88 3.81 5.98 8.47 12.61 16.88
For Pressure/Temperature Ratings, Refer to Page N-15, Graph No. 14 (1/2 to 1) Refer to Page N-14, Graph No. 12 (1-1/4 to 2) G-9
83-540-64 Series
FEATURES
Carbon Steel 250 Lb. Steam 3-Piece High Pressure Full Port Ball Valve
Threaded, 1500 psig WOG, Cold Non-Shock, 250 psig Saturated Steam. Vacuum Service to 29 inches Hg. Federal Specification: WW-V-35C, Type: II, Composition: CS, Style: 1.
Blow-out-proof stem design In-line repairable Adjustable packing gland Multifill packing Actuator mounting pad (3/4" to 2") Nitride corrosion protection
Tapping
Valves with -64 trim feature a yellow vinyl grip with distinctive red lettering. These valves are recommended for saturated steam to 250 psig. They are also recommended for services with fluids with widely varying temperatures and / or high thermal expansion rates.
CARBON STEEL 250 Lb. STEAM HIGH PRESSURE FULL PORT BALL VALVE
NUMBER 83-541-64 83-542-64 83-543-64 83-544-64 83-545-64 83-546-64 83-547-64 83-548-64 SIZE 1/4" 3/8" 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" A .43 .50 .62 .81 1.00 1.25 1.50 2.00 B 1.50 1.50 1.69 1.93 2.25 2.43 2.62 3.12 C 3.00 3.00 3.38 3.87 4.50 4.87 5.25 6.25 D 1.93 1.93 2.00 2.18 2.62 2.87 3.35 3.75 E 3.87 3.87 4.81 4.81 5.50 5.50 8.00 8.00 F N/A N/A N/A 1.25 1.62 1.62 1.62 1.62 G Wt. N/A 1.21 N/A 1.22 N/A 1.90 1/4-20 2.56 5/16-18 3.78 5/16-18 5.24 5/16-18 7.67 5/16-18 15.60
G-10
86-500-64 Series
FEATURES
Stainless Steel 250 Lb. Steam 3-Piece High Pressure Full Port Ball Valve
Threaded, 1500 psig WOG, Cold Non-Shock, 250 psig Saturated Steam. Vacuum Service to 29 inches Hg. Federal Specification: WW-V-35C, Type: II, Composition: SS, Style: 1.
Meets NACE MR-01-75 Blow-out-proof stem design 316 SS ball and stem Adjustable packing gland Actuator mounting pad (3/4" to 2") Multifill packing
Tapping
Valves with -64 trim feature a yellow vinyl grip with distinctive red lettering. These valves are recommended for saturated steam to 250 psig. They are also recommended for services with fluids with widely varying temperatures and / or high thermal expansion rates.
STAINLESS STEEL 250 Lb. STEAM 3-PIECE HIGH PRESSURE FULL PORT BALL VALVE
NUMBER 86-501-64 86-502-64 86-503-64 86-504-64 86-505-64 86-506-64 86-507-64 86-508-64 SIZE 1/4" 3/8" 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" A .43 .50 .62 .81 1.00 1.25 1.50 2.00 B 1.50 1.50 1.69 1.93 2.25 2.43 2.62 3.12 C 3.00 3.00 3.38 3.87 4.50 4.87 5.25 6.25 D 1.93 1.93 2.00 2.18 2.62 2.87 3.35 3.75 E 3.87 3.87 4.81 4.81 5.50 5.50 8.00 8.00 F N/A N/A N/A 1.25 1.62 1.62 1.62 1.62 G Wt. N/A 1.23 N/A 1.18 N/A 1.62 1/4-20 2.27 5/16-18 3.54 5/16-18 6.00 5/16-18 8.84 5/16-18 15.28
1/00
89-140-64 Series
FEATURES
Blow-out-proof stem design Adjustable packing gland Multifill seats Nitride corrosion protection
Investment cast components Multifill packing Mounting pad for easy actuator mounting 316 SS ball and stem
Valves with -64 trim feature a yellow vinyl grip with distinctive red lettering. These valves are recommended for saturated steam to 250 psig. They are also recommended for services with fluids with widely varying temperatures and / or high thermal expansion rates.
For Pressure/Temperature Ratings, Refer to Page N-15, Graph No. 13 (1/4 to 1) Refer to Page N-14, Graph No. 11 (1-1/4 to 2)
G-12
7M-140-64 Series
FEATURES
Blow-out-proof stem design Adjustable packing gland Full port for full flow & min. pressure drop Use for draining systems
Bronze 250 lb. Steam Full Port Ball Valve with Drain
NPT Threaded with NPT threaded drain port. Drain port plug standard. 600 psig WOG, cold non-shock. 250 psig saturated steam. Vacuum service to 29 inches of Hg.
Stainless steel ball & stem MPTFE seats and stuffing box ring Mounting pad for easy actuator mounting (3/4" to 2-1/2")
OPTIONS AVAILABLE:
(SUFFIX) -02-03-04-07-08-10-15-16-17-18-24-27-30-32-40-45-46-47-48-49-50-57-58-60OPTION Static Grounded 1-1/4" Stem Extension 2-1/4" Stem Extension Tee Handle 90 Reversed Stem SS Lever & Nut Round Handle Vertical Chain Lever Rough Chrome Plating Plain Yellow Grip Graphite Stem Packing Latch Lock Lever CamLock Handle SS Tee Handle & Nut Cyl-Loc Less Lever & Nut Latch Lock Lever - Lock Close Only SS Latch-Lock Oval Handle SS Oval Handle Assembled Dry 2-1/4 Locking Stem Extension Cleaned for Gaseous Oxygen Horizontal Chain Lever Static Grounded Ball & Stem SIZES 1/4" to 2-1/2" 1/4" to 2-1/2" 1/4" to 2-1/2" 1/4" to 1-1/4" 1/4" to 2-1/2" 1/4" to 2-1/2" 1/4" to 1-1/4" 3/4" to 2-1/2" 1/4" to 2-1/2" 1/4" to 2-1/2" 1/4" to 2-1/2" 1/4" to 2-1/2" 1/4" to 2-1/2" 1/4" to 2-1/2" 1/4" to 1-1/4" 1/4" to 2-1/2" 1/4" to 2-1/2" 1/4" to 3/4" 1/4" to 2" 1/4" to 2-1/2" 1/4" to 2-1/2" 1/4" to 2-1/2" 3/4" to 2-1/2" 1/4" to 2-1/2"
BRONZE 250 LB. STEAM FULL PORT BALL VALVE WITH DRAIN
NUMBER 7M-141-01 7M-142-01 7M-143-01 7M-144-01 7M-145-01 7M-146-01 7M-147-01 7M-148-01 7M-149-01 SIZE 1/4" 3/8" 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" 2-1/2" A .37 .37 .50 .81 1.00 1.25 1.50 2.00 2.50 B 1.03 1.03 1.10 1.56 1.80 2.12 2.37 2.70 3.25 C 2.06 2.06 2.19 3.12 3.61 4.25 4.74 5.38 6.50 D 1.75 1.75 1.75 2.12 2.62 2.87 3.30 3.71 4.05 E 3.87 3.87 3.87 4.78 5.50 5.50 7.78 7.78 7.78 F N/A N/A N/A .87 .93 .93 2.08 2.41 2.75 G N/A N/A N/A 1.37 1.50 1.50 3.06 3.52 3.37 H .09 .09 .12 .29 .31 .37 .50 .62 1.09 I .53 .53 .59 .90 1.12 1.37 1.56 2.03 2.34 J 1.18 1.18 1.25 1.56 1.78 2.03 2.21 2.68 3.00 K N/A N/A N/A .90 1.12 1.37 1.28 1.56 2.00 Wt. .70 .66 .73 1.93 3.42 5.15 6.81 11.85 17.35
1/00
G-13
SECTION D CONTENTS
ANSI FLANGED BALL VALVES
DESCRIPTION
87A-100 Series, ANSI Class 150 Flanged Stainless Steel-1-1/2" through 2" 87A-100 Series Stainless Steel ANSI Class 150 Flanged Std. Port Ball Valve - 2-1/2" through 3" 87A-100 Series Stainless Steel ANSI Class 150 Flanged Std. Port Ball Valve - 4" through 8 87A-200 Series, ANSI Class 150 Flanged Full Port Stainless Steel-1/2" through 1" 87A-200 Series, ANSI Class 150 Flanged Full Port Stainless Steel-1-1/2" through 2-1/2" 87A-200 Series, ANSI Class 150 Flanged Full Port Stainless Steel-3" through 6" 87A-400 Series, ANSI Class 150 Flanged Alloy 20 1/2" through 1" 87A-400 Series, ANSI Class 150 Flanged Alloy 20 1-1/2" through 2" 87A-400 Series, ANSI Class 150 Flanged Alloy 20 3" 87A-400 Series, ANSI Class 150 Flanged Alloy 20 4" 87A-700 Series, ANSI Class 300 Flanged Stainless Steel-1-1/2" through 2" 87A-700 Series, ANSI Class 300 Flanged Stainless Steel- 2-1/2" through 3" 87A-700 Series, ANSI Class 300 Flanged Stainless Steel- 4" through 8" 87A-900 Series, ANSI Class 300 Flanged Full Port Stainless Steel-1/2" through 1" 87A-900 Series, ANSI Class 300 Flanged Full Port Stainless Steel-1-1/2" through 2-1/2" 87A-900 Series, ANSI Class 300 Flanged Full Port Stainless Steel-3" through 6" 88A-100 Series, ANSI Class 150 Flanged Carbon Steel-1-1/2" through 2" 88A-100 Series, ANSI Class 150 Flanged Carbon Steel- 2-1/2" through 3" 88A-100 Series, ANSI Class 150 Flanged Carbon Steel- 4" through 8" 88A-200 Series, ANSI Class 150 Flanged Full Port Carbon Steel-1/2" through 1" 88A-200 Series, ANSI Class 150 Flanged Full Port Carbon Steel-1-1/2" through 2-1/2" 88A-200 Series, ANSI Class 150 Flanged Full Port Carbon Steel-3" through 6" 88A-700 Series, ANSI Class 300 Flanged Carbon Steel-1-1/2 through 2 88A-700 Series, ANSI Class 300 Flanged Carbon Steel- 2-1/2" through 3" 88A-700 Series, ANSI Class 300 Flanged Carbon Steel- 4" through 8" 88A-900 Series, ANSI Class 300 Flanged Full Port Carbon Steel-1/2" through 1" 88A-900 Series, ANSI Class 300 Flanged Full Port Carbon Steel-1-1/2" through 2-1/2" 88A-900 Series, ANSI Class 300 Flanged Full Port Carbon Steel-3" through 6"" 87-100 Series, ANSI Class 150 Flanged Stainless Steel - 1/2" through 1" 87-100 Series, ANSI Class 150 Flanged Stainless Steel - 1-1/2" through 2-1/2" 87-100 Series, ANSI Class 150 Flanged Stainless Steel - 3" through 10" 87-200 Series, ANSI Class 150 Flanged Full Port Stainless Steel- 1
PAGE
(New Item) (New Item) (New Item) (New Item) (New Item) (New Item) (New Item) (New Item) (New Item) (New Item) (New Item) (New Item) (New Item) (New Item) (New Item) (New Item) (New Item) (New Item) (New Item) (New Item) (New Item) (New Item) (New Item) (New Item) (New Item) (New Item) (New Item) (New Item) D-1 D-2 D-3 D-4 D-5 D-6 D-57 D-58 D-59 D-60 D-7 D-8 D- 9 D-10 D-11 D-12 D-13 D-14 D-15 D-16 D-17 D-18 D-19 D-20 D-21 D-22 D-23 D-24 D-25 D-26 D-27 D-28
87-200 Series, ANSI Class 150 Flanged Full Port Stainless Steel- 1-1/2 to 2-1/2 87-200 Series, ANSI Class 150 Flanged Full Port Stainless Steel- 3 to 6 87-200 Series, ANSI Class 150 Flanged Full Port Stainless Steel- 8 to 12 87-700 Series, ANSI Class 300 Flanged Stainless Steel - 2 87-700 Series, ANSI Class 300 Flanged Stainless Steel - 3 through 10 87-808 Series, 2" ANSI Class 600 Flanged Stainless Steel 88-808 Series, 2" ANSI Class 600 Flanged Carbon Steel 87-900 Series, ANSI Class 300 Flanged Full Port Stainless Steel - 1/2 through 1 1/2 87-900 Series, ANSI Class 300 Flanged Full Port Stainless Steel - 2 87-900 Series, ANSI Class 300 Flanged Full Port Stainless Steel - 3 through 6 87-900 Series, ANSI Class 300 Flanged Full Port Stainless Steel - 8 88-100 Series, ANSI Class 150 Flanged Carbon Steel - 1/2through 1 88-100 Series, ANSI Class 150 Flanged Carbon Steel - 1-1/2through 2-1/2 88-100 Series, ANSI Class 150 Flanged Carbon Steel - 3 through 10 88-200 Series, ANSI Class 150 Flanged Full Port Carbon Steel -1 88-200 Series, ANSI Class 150 Flanged Full Port Carbon Steel -1-1/2 through 2-1/2 88-200 Series, ANSI Class 150 Flanged Full Port Carbon Steel - 3 through 6 88-200 Series, ANSI Class 150 Flanged Full Port Carbon Steel - 8 through 12 88-700 Series, ANSI Class 300 Flanged Carbon Steel - 2 88-700 Series, ANSI Class 300 Flanged Carbon Steel - 3 through 10 88-900 Series, ANSI Class 300 Flanged Full Port Carbon Steel -1/2through 1 1/2 88-900 Series, ANSI Class 300 Flanged Full Port Carbon Steel - 2 88-900 Series, ANSI Class 300 Flanged Full Port Carbon Steel - 3 through 6 88-900 Series, ANSI Class 300 Flanged Full Port Carbon Steel - 8 452-200 Series, ANSI Class 150 Flanged Full Port Extended - 1/2through 2 452-200 Series, ANSI Class 150 Flanged Full Port Extended - 3 through 6 Bonnet Stainless Steel 453-200 Series, ANSI Class 150 Flanged Full Port Extended - 1/2 through 2 453-200 Series, ANSI Class 150 Flanged Full Port Extended - 3 through 6
D-29 D-30 D-31 D-32 D-33 D-34 D-35 D-36 D-37 D-38 D-39 D-40 D-41 D-42 D-43 D-44 D-45 D-46 D-47 D-48 D-49 D-50 D-51 D-52 D-53 D-54
D-55 D-56
87A-100 SeriesBall Valve Stainless Steel ANSI Class 150 Flanged Std. Port
OPTIONS AVAILABLE:
(SUFFIX) -01-14-15-21-24-35-38-49-57-60-65-67-69-70-73-74OPTION Standard (Locking Kit and Grounded Stem) Side Vented Ball (See Page J-2) Wheel Handle UHMWPE Seats Fire Safe (Graphite Packing and Seal) PTFE Seats and Seals PEEK Seats and Graphite Packing Assembled Dry Oxygen Cleaned Grounded Ball and Stem MPTFE Seats and Graphite Packing Cleaned For Industrial Gases Drilled and Tapped Purge Port with Plug 4" Extended Bonnet 316 SS Spiral Wound Gaskets w/PTFE Filler 316 SS Spiral Wound Gaskets w/Graphite Filler
MATERIALS OF CONSTRUCTION
Description 1. Body 2. Retainer 3. Ball 4. Stem 5. Packing Gland 6. Stem Seals 7. Seats 8. Gland Screws 9. Gland Plate 10. Stem Nut 11. Lever 12. Stem Bearing 13. Stop 14. Stop Screw 15. Lock Plate 16. Body Seal 17. Lockwasher 18. Grounding Spring Material ASTM A351 CF8M ASTM A276 Type 316 ASTM A276 Type 316 ASTM A276 Type 316 ASTM A276 Type 316 PTFE RPTFE ASTM A193 B8 Class 1 302 or 304 SS 316 SS 302 or 304 SS with Vinyl Grip RPTFE ASTM A276 Type 316 18-8 SS 302 or 304 SS RPTFE 302 or 304 SS SS
A 1.00 1.50
B 6.50 7.00
C 3.69 3.69
D 3.62 4.62
E 6.03 6.65
F 0.47 0.72
G 1.62 2.41
H 2.15 3.09
I 1.392 1.949
J 0.696 0.974
K 0.500 0.625
N 1.50 2.00
1/00
D-1
87A-100 SeriesBall Valve Stainless Steel ANSI Class 150 Flanged Std. Port
STANDARD FEATURES
Two Position Locking Device Antistatic Grounded Stem CHV Style Adjustable Stem Seals Blow-out Proof Stem Design Cast Bosses for Bleed / Drain Ports Four Point ISO 5211 Mounting Pad Bolt Circle Slot Vented Ball for Thermal Expansion Vacuum Service to 29 inches Hg
OPTIONS AVAILABLE:
(SUFFIX) -01-14-21-24-35-38-49-57-60-65-67-69-70-73-74-MG-MH-MJ-MKOPTION Standard (Locking Kit and Grounded Stem) Side Vented Ball (See Page J-2) UHMWPE Seats Fire Safe (Graphite Packing and Seal) PTFE Seats and Seals PEEK Seats and Graphite Packing Assembled Dry Oxygen Cleaned Grounded Ball and Stem MPTFE Seats and Graphite Packing Cleaned For Industrial Gases Drilled and Tapped Purge Port with Plugs 4" Extended Bonnet 316 SS Spiral Wound Gaskets w/PTFE Filler 316 SS Spiral Wound Gaskets w/Graphite Filler Gear Operator with Standard Handwheel Gear Operator with Standard Handwheel & Locking Device Gear Operator with Oversize Handwheel Gear Operator with Oversize Handwheel & Locking Device
MATERIALS OF CONSTRUCTION
Description 1. Body 2. Retainer 3. Ball 4. Stem 5. Packing Gland 6. Stem Seals 7. Seats 8. Gland Screws 9. Gland Plate 10. Stem Nut 11. Lever 12. Stem Bearing 13. Stop 14. Stop Screw 15. Lock Plate 16. Body Seal 17. Grounding Spring 18. Body Joint Stud 19. Body Joint Nut 20. Lockwasher Material ASTM A351 CF8M ASTM A351 CF8M ASTM A276 Type 316 or A351 CF8M ASTM A276 Type 316 ASTM A276 Type 316 PTFE RPTFE ASTM A193 B8 Class 1 316 SS 18-8 SS 316 SS RPTFE ASTM A276 Type 316 316 SS 302 or 304 SS RPTFE SS ASTM A194 Grade B8M ASTM A194 Grade 8 302 or 304 SS
A 2.00 2.50
B 7.50 8.00
C 3.50 3.51
D 5.61 6.23
E 8.40 8.40
F 0.80 0.80
G 3.31 3.93
H 4.08 4.70
I 1.949 1.949
J 0.974 0.974
K 0.750 0.750
L 0.477 0.477
M 5/16-18 5/16-18
N 2.50 3.00
D-2
1/00
87A-100 SeriesBall Valve Stainless Steel ANSI Class 150 Flanged Std. Port
STANDARD FEATURES
Two Position Locking Device Antistatic Grounded Stem CHV Style Adjustable Stem Seals Blow-out Proof Stem Design Cast Bosses for Bleed / Drain Ports Four Point ISO 5211 Mounting Pad Bolt Circle Slot Vented Ball for Thermal Expansion Vacuum Service to 29 inches Hg
OPTIONS AVAILABLE:
(SUFFIX) -01-14-21-24-35-49-57-60-65-67-69-70-73-74-MG-MH-MJ-MKOPTION Standard (Locking Kit and Grounded Stem) Side Vented Ball (See Page J-2) UHMWPE Seats Fire Safe (Graphite Packing and Seal) PTFE Seats and Seals Assembled Dry Oxygen Cleaned Grounded Ball and Stem MPTFE Seats and Graphite Packing Cleaned For Industrial Gases Drilled and Tapped Purge Ports with Plugs 4" Extended Bonnet (4" & 6" Valves Only) 316 SS Spiral Wound Gaskets w/PTFE Filler 316 SS Spiral Wound Gaskets w/Graphite Filler Gear Operator with Standard Handwheel Gear Operator with Standard Handwheel & Locking Device Gear Operator with Oversize Handwheel Gear Operator with Oversize Handwheel & Locking Device
MATERIALS OF CONSTRUCTION
Description 1. Body 2. Retainer 3. Ball 4. Stem 5. Packing Gland 6. Stem Seals 7. Seats 8. Gland Screws 9. Gland Plate 10. Adapter Screw 11. Handle Adapter 12. Stem Bearing 13. Stop 14. Stop Screw 15. Lock Plate 16. Body Seal 17. Grounding Spring 18. Body Joint Stud 19. Body Joint Nut 20. Lockwasher 21. Pipe Handle Material ASTM A351 CF8M ASTM A351 CF8M ASTM A276 Type 316 or A351 CF8M ASTM A276 Type 316 ASTM A276 Type 316 PTFE RPTFE ASTM A193 B8 Class 1 316 SS 18-8 SS 316 SS RPTFE ASTM A276 Type 316 316 SS 302 or 304 SS RPTFE SS ASTM A194 Grade B8M ASTM A194 Grade 8 302 or 304 SS Galvanized Steel (not Shown)
1/00
D-3
87A-200 SeriesBall Valve Stainless Steel ANSI Class 150 Flanged Full Port
STANDARD FEATURES
Two Position Locking Device Antistatic Grounded Stem CHV Style Adjustable Stem Seals Blow-out Proof Stem Design Cast Boss for Bleed / Drain Port Four Point ISO 5211 Mounting Pad Bolt Circle Full Bore Design for Maximum Flow Efficiency Slot Vented Ball for Thermal Expansion Vacuum Service to 29 inches Hg
OPTIONS AVAILABLE:
(SUFFIX) -01-14-15-21-24-35-38-49-57-60-65-67-69-70-73-74OPTION Standard (Locking Kit and Grounded Stem) Side Vented Ball (See Page J-2) Wheel Handle UHMWPE Seats Fire Safe (Graphite Packing and Seal) PTFE Seats and Seals PEEK Seats and Graphite Packing Assembled Dry Oxygen Cleaned Grounded Ball and Stem MPTFE Seats and Graphite Packing Cleaned For Industrial Gases Drilled and Tapped Purge Port with Plugs 4" Extended Bonnet 316 SS Spiral Wound Gaskets w/PTFE Filler 316 SS Spiral Wound Gaskets w/Graphite Filler
MATERIALS OF CONSTRUCTION
Description 1. Body 2. Retainer 3. Ball 4. Stem 5. Packing Gland 6. Stem Seals 7. Seats 8. Gland Screws 9. Gland Plate 10. Stem Nut 11. Lever 12. Stem Bearing 13. Stop 14. Stop Screw 15. Lock Plate 16. Body Seal 17. Lockwasher 18. Grounding Spring Material ASTM A351 CF8M ASTM A276 Type 316 ASTM A276 Type 316 ASTM A276 Type 316 ASTM A276 Type 316 PTFE RPTFE ASTM A193 B8 Class 1 302 or 304 SS 316 SS 302 or 304 with Vinyl Grip RPTFE ASTM A276 Type 316 18-8 SS 302 or 304 SS RPTFE 302 or 304 SS SS
D-4
1/00
87A-200 SeriesBall Valve Stainless Steel ANSI Class 150 Flanged Full Port
STANDARD FEATURES
Two Position Locking Device Antistatic Grounded Stem CHV Style Adjustable Stem Seals Blow-out Proof Stem Design Cast Bosses for Bleed / Drain Ports Four Point ISO 5211 Mounting Pad Bolt Circle Slot Vented Ball for Thermal Expansion Vacuum Service to 29 inches Hg
OPTIONS AVAILABLE:
(SUFFIX) -01-14-21-24-35-38-49-57-60-65-67-69-70-73-74-MG-MH-MJ-MKOPTION Standard (Locking Kit and Grounded Stem) Side Vented Ball (See Page J-2) UHMWPE Seats Fire Safe (Graphite Packing and Seal) PTFE Seats and Seals PEEK Seats and Graphite Packing (3" Only) Assembled Dry Oxygen Cleaned Grounded Ball and Stem MPTFE Seats and Graphite Packing Cleaned For Industrial Gases Drilled and Tapped Purge Ports with Plugs 4" Extended Bonnet 316 SS Spiral Wound Gaskets w/PTFE Filler 316 SS Spiral Wound Gaskets w/Graphite Filler Gear Operator with Standard Handwheel Gear Operator with Standard Handwheel & Locking Device Gear Operator with Oversize Handwheel Gear Operator with Oversize Handwheel & Locking Device
MATERIALS OF CONSTRUCTION
Description 1. Body 2. Retainer 3. Ball 4. Stem 5. Packing Gland 6. Stem Seals 7. Seats 8. Gland Screws 9. Gland Plate 10. Adapter Screw 11. Lever 12. Stem Bearing 13. Stop 14. Stop Screw 15. Lock Plate 16. Body Seal 17. Grounding Spring 18. Body Joint Stud 19. Body Joint Nut 20. Lockwasher Material ASTM A351 CF8M ASTM A351 CF8M ASTM A276 Type 316 or A351 CF8M ASTM A276 Type 316 ASTM A276 Type 316 PTFE RPTFE ASTM A193 B8 Class 1 316 SS 18-8 SS 316 SS RPTFE ASTM A276 Type 316 316 SS 302 or 304 SS RPTFE SS ASTM A193 Grade B8M ASTM A194 Grade 8 302 or 304 SS
1/00
REVISED 12/99
D-5
87A-200 SeriesBall Valve Stainless Steel ANSI Class 150 Flanged Full Port
STANDARD FEATURES
Two Position Locking Device Antistatic Grounded Stem CHV Style Adjustable Stem Seals Blow-out Proof Stem Design Cast Bosses for Bleed / Drain Ports Four Point ISO 5211 Mounting Pad Bolt Circle Full Bore Design for Maximum Flow Efficiency Slot Vented Ball for Thermal Expansion Vacuum Service to 29 inches Hg
OPTIONS AVAILABLE:
(SUFFIX) -01-14-21-24-35-38-49-57-60-65-67-69-70-73-74-MG-MH-MJ-MKOPTION Standard (Locking Kit and Grounded Stem) Side Vented Ball (See Page J-2) UHMWPE Seats Fire Safe (Graphite Packing and Seal) PTFE Seats and Seals PEEK Seats and Graphite Packing (3" Only) Assembled Dry Oxygen Cleaned Grounded Ball and Stem MPTFE Seats and Graphite Packing Cleaned For Industrial Gases Drilled and Tapped Purge Ports with Plugs 4" Extended Bonnet (3" & 4" Valves Only) 316 SS Spiral Wound Gaskets w/PTFE Filler 316 SS Spiral Wound Gaskets w/Graphite Filler Gear Operator with Standard Handwheel Gear Operator with Standard Handwheel & Locking Device Gear Operator with Oversize Handwheel Gear Operator with Oversize Handwheel & Locking Device
MATERIALS OF CONSTRUCTION
Description 1. Body 2. Retainer 3. Ball 4. Stem 5. Packing Gland 6. Stem Seals 7. Seats 8. Gland Screws 9. Gland Plate 10. Adapter Screw 11. Handle Adapter 12. Stem Bearing 13. Stop 14. Stop Screw 15. Lock Plate 16. Body Seal 17. Grounding Spring 18. Body Joint Stud 19. Body Joint Nut 20. Pipe Handle Material ASTM A351 CF8M ASTM A351 CF8M ASTM A276 Type 316 or A351 CF8M ASTM A276 Type 316 ASTM A276 Type 316 PTFE RPTFE ASTM A193 B8 Class 1 316 SS 18-8 SS 316 with Vinyl Grip RPTFE ASTM A276 Type 316 316 SS 302 or 304 SS RPTFE SS ASTM A193 Grade B8M ASTM A194 Grade 8 Galvanized Steel (not shown)
D-6
1/00
87A-700 SeriesBall Valve Stainless Steel ANSI Class 300 Flanged Std. Port
STANDARD FEATURES
Two Position Locking Device Antistatic Grounded Stem CHV Style Adjustable Stem Seals Blow-out Proof Stem Design Cast Boss for Bleed / Drain Port Four Point ISO 5211 Mounting Pad Bolt Circle Slot Vented Ball for Thermal Expansion Vacuum Service to 29 inches Hg
OPTIONS AVAILABLE:
(SUFFIX) -01-14 -15-21 -24 -35 -38-49-57-60-65-67-69-70-73-74OPTION Standard (Locking Kit and Grounded Stem) Side Vented Ball (See Page J-2) Wheel Handle UHMWPE Seats Fire Safe (Graphite Packing and Seal) PTFE Seats and Seals PEEK Seats and Graphite Packing Assembled Dry Oxygen Cleaned Grounded Ball and Stem MPTFE Seats and Graphite Packing Cleaned For Industrial Gases Drilled and Tapped Purge Ports with Plugs 4" Extended Bonnet 316 SS Spiral Wound Gaskets w/PTFE Filler 316 SS Spiral Wound Gaskets w/Graphite Filler
MATERIALS OF CONSTRUCTION
Description 1. Body 2. Retainer 3. Ball 4. Stem 5. Packing Gland 6. Stem Seals 7. Seats 8. Gland Screws 9. Gland Plate 10. Stem Nut 11. Lever 12. Stem Bearing 13. Stop 14. Stop Screw 15. Lock Plate 16. Body Seal 17. Lockwasher 18. Grounding Spring Material ASTM A351 CF8M ASTM A276 Type 316 ASTM A276 Type 316 ASTM A276 Type 316 ASTM A276 Type 316 PTFE RPTFE ASTM A193 B8 Class 1 302 & 304 SS 316 SS 302 & 304 SS with Vinyl Grip RPTFE ASTM A276 Type 316 18-8 SS 302 or 304 SS RPTFE 302 or 304 SS SS
A 1.00 1.50
B 7.50 8.50
C 4.69 5.19
D 3.62 4.62
E 6.03 6.65
F 0.47 0.72
G 1.62 2.41
H 2.15 3.09
I 1.392 1.949
J 0.696 0.974
K 0.500 0.625
N 1.50 2.00
1/00
D-7
87A-700 SeriesBall Valve Stainless Steel ANSI Class 300 Flanged Std. Port
STANDARD FEATURES
Two Position Locking Device Antistatic Grounded Stem CHV Style Adjustable Stem Seals Blow-out Proof Stem Design Cast Bosses for Bleed / Drain Ports Four Point ISO 5211 Mounting Pad Bolt Circle Slot Vented Ball for Thermal Expansion Vacuum Service to 29 inches Hg
OPTIONS AVAILABLE:
(SUFFIX) -01-14-21-24-35-38-49-57-60-65-67-69-70-73-74-MG-MH-MJ-MKOPTION Standard (Locking Kit and Grounded Stem) Side Vented Ball (See Page J-2) UHMWPE Seats Fire Safe (Graphite Packing and Seal) PTFE Seats and Seals PEEK Seats and Graphite Packing Assembled Dry Oxygen Cleaned Grounded Ball and Stem MPTFE Seats and Graphite Packing Cleaned For Industrial Gases Drilled and Tapped Purge Ports with Plugs 4" Extended Bonnet 316 SS Spiral Wound Gaskets w/PTFE Filler 316 SS Spiral Wound Gaskets w/Graphite Filler Gear Operator with Standard Handwheel Gear Operator with Standard Handwheel & Locking Device Gear Operator with Oversize Handwheel Gear Operator with Oversize Handwheel & Locking Device
MATERIALS OF CONSTRUCTION
Description 1. Body 2. Retainer 3. Ball 4. Stem 5. Packing Gland 6. Stem Seals 7. Seats 8. Gland Screws 9. Gland Plate 10. Stem Nut 11. Lever 12. Stem Bearing 13. Stop 14. Stop Screw 15. Lock Plate 16. Body Seal 17. Grounding Spring 18. Body Joint Stud 19. Body Joint Nut 20. Lockwasher Material ASTM A351 CF8M ASTM A351 CF8M ASTM A276 Type 316 or A351 CF8M ASTM A276 Type 316 ASTM A276 Type 316 PTFE RPTFE ASTM A193 B8 Class 1 316 SS 18-8 SS 316 with Vinyl Grip RPTFE ASTM A276 Type 316 316 SS 302 or 304 SS RPTFE SS ASTM A193 Grade B8M ASTM A194 Grade 8 302 or 304 SS
A 2.00 2.50
B 9.50 11.12
C 4.75 5.56
D 5.61 6.23
E 8.40 8.40
F 0.80 0.80
G 3.31 3.93
H 4.08 4.70
I 1.949 1.949
J 0.974 0.974
K 0.750 0.750
L 0.477 0.477
M 5/16-18 5/16-18
N 2.50 3.00
D-8
1/00
87A-700 SeriesBall Valve Stainless Steel ANSI Class 300 Flanged Std. Port
STANDARD FEATURES
Two Position Locking Device Antistatic Grounded Stem CHV Style Adjustable Stem Seals Blow-out Proof Stem Design Cast Bosses for Bleed / Drain Ports Four Point ISO 5211 Mounting Pad Bolt Circle Slot Vented Ball for Thermal Expansion Vacuum Service to 29 inches Hg
OPTIONS AVAILABLE:
(SUFFIX) -01-14-21-24-35-49-57-60-65-67-69-70-73-74-MG-MH-MJ-MKOPTION Standard (Locking Kit and Grounded Stem) Side Vented Ball (See Page J-2) UHMWPE Seats Fire Safe (Graphite Packing and Seal) PTFE Seats and Seals Assembled Dry Oxygen Cleaned Grounded Ball and Stem MPTFE Seats and Graphite Packing Cleaned For Industrial Gases Drilled and Tapped Purge Ports with Plugs 4" Extended Bonnet (4" & 6" Valves Only) 316 SS Spiral Wound Gaskets w/PTFE Filler 316 SS Spiral Wound Gaskets w/Graphite Filler Gear Operator with Standard Handwheel Gear Operator with Standard Handwheel & Locking Device Gear Operator with Oversize Handwheel Gear Operator with Oversize Handwheel & Locking Device
MATERIALS OF CONSTRUCTION
Description 1. Body 2. Retainer 3. Ball 4. Stem 5. Packing Gland 6. Stem Seals 7. Seats 8. Gland Screws 9. Gland Plate 10. Adapter Screw 11. Handle Adapter 12. Stem Bearing 13. Stop 14. Stop Screw 15. Lock Plate 16. Body Seal 17. Grounding Spring 18. Body Joint Stud 19. Body Joint Nut 20. Adapter Screw 21. Pipe Handle Material ASTM A351 CF8M ASTM A276 Type 316 ASTM A276 Type 316 or A351 CF8M ASTM A276 Type 316 ASTM A276 Type 316 PTFE RPTFE ASTM A193 B8 Class 1 316 SS 18-8 SS 316 SS RPTFE ASTM A276 Type 316 316 SS 302 or 304 SS RPTFE SS ASTM A193 Grade B8M ASTM A194 Grade 8 18-8 SS Galvanized Steel (not shown)
1/00
D-9
87A-900 SeriesBall Valve Stainless Steel ANSI Class 300 Flanged Full Port
STANDARD FEATURES
Two Position Locking Device Antistatic Grounded Stem CHV Style Adjustable Stem Seals Blow-out Proof Stem Design Cast Boss for Bleed / Drain Port Four Point ISO 5211 Mounting Pad Bolt Circle Full Bore Design for Maximum Flow Efficiency Slot Vented Ball for Thermal Expansion Vacuum Service to 29 inches Hg
OPTIONS AVAILABLE:
(SUFFIX) -01-14-15-21-24-35-38-49-57-60-65-67-69-70-73-74OPTION Standard (Locking Kit and Grounded Stem) Side Vented Ball (See Page J-2) Wheel Handle UHMWPE Seats Fire Safe (Graphite Packing and Seal) PTFE Seats and Seals PEEK Seats and Graphite Packing Assembled Dry Oxygen Cleaned Grounded Ball and Stem MPTFE Seats and Graphite Packing Cleaned For Industrial Gases Drilled and Tapped Purge Port with Plugs 4" Extended Bonnet 316 SS Spiral Wound Gaskets w/PTFE Filler 316 SS Spiral Wound Gaskets w/Graphite Filler
MATERIALS OF CONSTRUCTION
Description 1. Body 2. Retainer 3. Ball 4. Stem 5. Packing Gland 6. Stem Seals 7. Seats 8. Gland Screws 9. Gland Plate 10. Stem Nut 11. Lever 12. Stem Bearing 13. Stop 14. Stop Screw 15. Lock Plate 16. Body Seal 17. Lockwasher 18. Grounding Spring Material ASTM A351 CF8M ASTM A276 Type 316 ASTM A276 Type 316 ASTM A276 Type 316 ASTM A276 Type 316 PTFE RPTFE ASTM A193 B8 Class 1 302 or 304 SS 316 SS 302 or 304 with Vinyl Grip RPTFE ASTM A276 Type 316 18-8 SS 302 or 304 SS RPTFE 302 or 304 SS SS
1.00
6.50
3.82
3.62
6.03
0.47
1.62
2.15
1.392
0.696
0.500
0.287
1/4-20
D-10
1/00
87A-900 SeriesBall Valve Stainless Steel ANSI Class 300 Flanged Full Port
STANDARD FEATURES
Two Position Locking Device Antistatic Grounded Stem CHV Style Adjustable Stem Seals Blow-out Proof Stem Design Cast Bosses for Bleed / Drain Ports Four Point ISO 5211 Mounting Pad Bolt Circle Full Bore Design for Maximum Flow Efficiency Slot Vented Ball for Thermal Expansion Vacuum Service to 29 inches Hg
OPTIONS AVAILABLE:
(SUFFIX) -01-14-21-24-35-38-49-57-60-65-67-69-70-73-74-MG-MH-MJ-MKOPTION Standard (Locking Kit and Grounded Stem) Side Vented Ball (See Page J-2) UHMWPE Seats Fire Safe (Graphite Packing and Seal) PTFE Seats and Seals PEEK Seats and Graphite Packing (3" Only) Assembled Dry Oxygen Cleaned Grounded Ball and Stem MPTFE Seats and Graphite Packing Cleaned For Industrial Gases Drilled and Tapped Purge Ports with Plugs 4" Extended Bonnet 316 SS Spiral Wound Gaskets w/PTFE Filler 316 SS Spiral Wound Gaskets w/Graphite Filler Gear Operator with Standard Handwheel Gear Operator with Standard Handwheel & Locking Device Gear Operator with Oversize Handwheel Gear Operator with Oversize Handwheel & Locking Device
MATERIALS OF CONSTRUCTION
Description 1. Body 2. Retainer 3. Ball 4. Stem 5. Packing Gland 6. Stem Seals 7. Seats 8. Gland Screws 9. Gland Plate 10. Stem Nut 11. Lever 12. Stem Bearing 13. Stop 14. Stop Screw 15. Lock Plate 16. Body Seal 17. Grounding Spring 18. Body Joint Stud 19. Body Joint Nut 20. Lockwasher Material ASTM A351 CF8M ASTM A351 CF8M ASTM A276 Type 316 or A351 CF8M ASTM A276 Type 316 ASTM A276 Type 316 PTFE RPTFE ASTM A193 B8 Class 1 316 SS 18-8 SS 316 SS RPTFE ASTM A276 Type 316 316 SS 302 or 304 SS RPTFE SS ASTM A193 Grade B8M ASTM A194 Grade 8 302 or 304 SS
1/00
D-11
Stainless Steel ANSI Class 300 Flanged Full Port Ball Valve 3" through 6" STANDARDS COMPLIANCE
ASME B16.5- "Pipe Flanges and Flanged Fittings" ASME B16.10- "Face to Face Dimensions of Valves" ASME B16.34- "Valves - Flanged, Threaded, and Welding End" API 607"Fire Test - Soft Seated Quarter Turn Valves" (-24 option) API 608"Ball Valves - Flanged, Threaded, and Welding End" MSS SP-25"Standard Marking System for Valves" MSS SP-61"Pressure Testing of Steel Valves" MSS SP-72"Ball Valves with Flanged or Buttwelding Ends" ASME B31.1,- Pressure Piping Standards B31.3, & B31.8
87A-900 Series
STANDARD FEATURES
Two Position Locking Device Antistatic Grounded Stem CHV Style Adjustable Stem Seals Blow-out Proof Stem Design Cast Bosses for Bleed / Drain Ports Four Point ISO 5211 Mounting Pad Bolt Circle Full Bore Design for Maximum Flow Efficiency Slot Vented Ball for Thermal Expansion Vacuum Service to 29 inches Hg
OPTIONS AVAILABLE:
(SUFFIX) -01-14-21-24-35-38-49-57-60-65-67-69-70-73-74-MG-MH-MJ-MKOPTION Standard (Locking Kit and Grounded Stem) Side Vented Ball (See Page J-2) UHMWPE Seats Fire Safe (Graphite Packing and Seal) PTFE Seats and Seals PEEK Seats and Graphite Packing (3" Only) Assembled Dry Oxygen Cleaned (SS Valves Only) Grounded Ball and Stem MPTFE Seats and Graphite Packing Cleaned For Industrial Gases Drilled and Tapped Purge Port with Plugs 4" Extended Bonnet (3" 7 4" Valves Only) 316 SS Spiral Wound Gaskets w/PTFE Filler 316 SS Spiral Wound Gaskets w/Graphite Filler Gear Operator with Standard Handwheel Gear Operator with Standard Handwheel & Locking Device Gear Operator with Oversize Handwheel Gear Operator with Oversize Handwheel & Locking Device
MATERIALS OF CONSTRUCTION
Description 1. Body 2. Retainer 3. Ball 4. Stem 5. Packing Gland 6. Stem Seals 7. Seats 8. Gland Screws 9. Gland Plate 10. Adapter Screw 11. Handle Adapter 12. Stem Bearing 13. Stop 14. Stop Screw 15. Lock Plate 16. Body Seal 17. Grounding Spring 18. Body Joint Stud 19. Body Joint Nut 20. Pipe Handle Material ASTM A351 CF8M ASTM A351 CF8M ASTM A276 Type 316 or A351 CF8M ASTM A276 Type 316 ASTM A276 Type 316 PTFE RPTFE ASTM A193 B8 Class 1 316 SS 18-8 SS 316 SS RPTFE ASTM A276 Type 316 316 SS 302 or 304 SS RPTFE SS ASTM A193 Grade B8M ASTM A194 Grade 8 Galvanized Steel (not shown)
D-12
1/00
88A-100 Series Valve Carbon Steel ANSI Class 150 Flanged Std. Port Ball
VARIATIONS AVAILABLE:
88A-140 Series (316 SS Ball & Stem)
OPTIONS AVAILABLE:
(SUFFIX) -01-10-14-15-21-24-35-38-49-60-65-67-69-70-73-74OPTION Standard (Locking Kit and Grounded Stem) SS Lever and Nut Side Vented Ball (See Page J-2) Wheel Handle UHMWPE Seats Fire Safe (Graphite Packing and Seal) PTFE Seats and Seals PEEK Seats and Graphite Packing Assembled Dry Grounded Ball and Stem MPTFE Seats and Graphite Packing Cleaned For Industrial Gases Drilled and Tapped Purge Port with Plug 4" Extended Bonnet 316 SS Spiral Wound Gaskets w/PTFE Filler 316 SS Spiral Wound Gaskets w/Graphite Filler
MATERIALS OF CONSTRUCTION
Description 1. Body 2. Retainer 3. Ball 4. Stem 5. Packing Gland 6. Stem Seals 7. Seats 8. Gland Screws 9. Gland Plate 10. Stem Nut 11. Lever 12. Stem Bearing 13. Stop 14. Stop Screw 15. Lock Plate 16. Body Seal 17. Lockwasher 18. Grounding Spring Material ASTM A216 WCB ASTM A108 Type 1215 ASTM A108 Type 1215 ASTM A108 Type 1215 ASTM A108 Type 1215 PTFE RPTFE ASTM A193 B7 302 or 304 SS 316 SS ASTM A366 Steel with Vinyl Grip RPTFE ASTM A108 Type 1215 SAE J429 Grade 2 ASTM A366 Steel RPTFE 302 or 304 SS SS
A 1.00 1.50
B 6.50 7.00
C 3.69 3.69
D 3.62 4.62
E 6.03 6.65
F 0.47 0.72
G 1.62 2.41
H 2.15 3.09
I 1.392 1.949
J 0.696 0.974
K 0.500 0.625
L 0.287 0.412
M 1/4-20 5/16-18
N 1.50 2.00
1/00
D-13
88A-100 Series Valve Carbon Steel ANSI Class 150 Flanged Std. Port Ball
STANDARD FEATURES
Two Position Locking Device Antistatic Grounded Stem CHV Style Adjustable Stem Seals Blow-out Proof Stem Design Cast Bosses for Bleed / Drain Ports Four Point ISO 5211 Mounting Pad Bolt Circle Slot Vented Ball for Thermal Expansion Vacuum Service to 29 inches Hg
VARIATIONS AVAILABLE:
88A-140 Series (316 SS Ball & Stem)
OPTIONS AVAILABLE:
(SUFFIX) -01-10-14-21-24-35-38-49-59-60-65-67-69-70-73-74-MG-MH-MJ-MKOPTION Standard (Locking Kit and Grounded Stem) SS Lever and Nut Side Vented Ball (See Page J-2) UHMWPE Seats Fire Safe (Graphite Packing and Seal) PTFE Seats and Seals PEEK Seats and Graphite Packing Assembled Dry SS External Trim Grounded Ball and Stem MPTFE Seats and Graphite Packing Cleaned For Industrial Gases Drilled and Tapped Purge Port with Plugs 4" Extended Bonnet 316 SS Spiral Wound Gaskets w/PTFE Filler 316 SS Spiral Wound Gaskets w/Graphite Filler Gear Operator with Standard Handwheel Gear Operator with Standard Handwheel & Locking Device Gear Operator with Oversize Handwheel Gear Operator with Oversize Handwheel & Locking Device
MATERIALS OF CONSTRUCTION
Description 1. Body 2. Retainer 3. Ball 4. Stem 5. Packing Gland 6. Stem Seals 7. Seats 8. Gland Screws 9. Gland Plate 10. Stem Nut 11. Lever 12. Stem Bearing 13. Stop 14. Stop Screw 15. Lock Plate 16. Body Seal 17. Grounding Spring 18. Body Joint Stud 19. Body Joint Nut 20. Lockwasher Material ASTM A216 WCB ASTM A216 WCB ASTM A216 WCB or A216 WCB ASTM A108 Type 1215 ASTM A108 Type 1215 PTFE RPTFE ASTM A193 B7 302 or 304 SS ASTM A194 Grade 8 ASTM A366 Steel with Vinyl Grip RPTFE ASTM A108 Type 1215 SAE J429 Grade 2 ASTM A366 Steel RPTFE SS ASTM A193 Grade B7 ASTM A194 Grade 2H 302 or 304 SS
A 2.00 2.50
B 7.50 8.00
C 3.50 3.51
D 5.61 6.23
E 8.40 8.40
F 0.80 0.80
G 3.31 3.93
H 4.08 4.70
I 1.949 1.949
J 0.974 0.974
K 0.750 0.750
L 0.477 0.477
M 5/16-18 5/16-18
N 2.50 3.00
D-14
1/00
88A-100 Series Valve Carbon Steel ANSI Class 150 Flanged Std. Port Ball
STANDARD FEATURES
Two Position Locking Device Antistatic Grounded Stem CHV Style Adjustable Stem Seals Blow-out Proof Stem Design Cast Bosses for Bleed / Drain Ports Four Point ISO 5211 Mounting Pad Bolt Circle Slot Vented Ball for Thermal Expansion Vacuum Service to 29 inches Hg
VARIATIONS AVAILABLE:
88A-140 Series (316 SS Ball & Stem)
OPTIONS AVAILABLE:
(SUFFIX) -01-14-21-24-35-49-57-59-60-65-67-69-70-73-74-MG-MH-MJ-MKOPTION Standard (Locking Kit and Grounded Stem) Side Vented Ball (See Page J-2) UHMWPE Seats Fire Safe (Graphite Packing and Seal) PTFE Seats and Seals Assembled Dry Oxygen Cleaned (SS Valves Only) SS External Trim Grounded Ball and Stem MPTFE Seats and Graphite Packing Cleaned For Industrial Gases Drilled and Tapped Purge Ports with Plugs 4" Extended Bonnet (4" & 6" Valves Only) 316 SS Spiral Wound Gaskets w/PTFE Filler 316 SS Spiral Wound Gaskets w/Graphite Filler Gear Operator with Standard Handwheel Gear Operator with Standard Handwheel & Locking Device Gear Operator with Oversize Handwheel Gear Operator with Oversize Handwheel & Locking Device
MATERIALS OF CONSTRUCTION
Description 1. Body 2. Retainer 3. Ball 4. Stem 5. Packing Gland 6. Stem Seals 7. Seats 8. Gland Screws 9. Gland Plate 10. Adaptor Screw 11. Handle Adapter 12. Stem Bearing 13. Stop 14. Stop Screw 15. Lock Plate 16. Body Seal 17. Grounding Spring 18. Body Joint Stud 19. Body Joint Nut 20. Adapter Screw 21. Pipe Handle Material ASTM A216 WCB ASTM A216 WCB ASTM A216 WCB or A216 WCB ASTM A108 Type 1215 ASTM A108 Type 1215 PTFE RPTFE ASTM A193 B7 316 SS 316 SS ASTM A366 Steel with Vinyl Grip RPTFE ASTM A108 Type 1215 SAE J429 Grade 2 ASTM A366 Steel RPTFE SS ASTM A193 Grade B7 ASTM A194 Grade 2H 18-8 SS Galvanized Steel (not shown)
1/00
D-15
88A-200 Series Valve Carbon Steel ANSI Class 150 Flanged Full Port Ball
STANDARD FEATURES
Two Position Locking Device Antistatic Grounded Stem CHV Style Adjustable Stem Seals Blow-out Proof Stem Design Cast Bosses for Bleed / Drain Ports Four Point ISO 5211 Mounting Pad Bolt Circle Full Bore Design for Maximum Flow Efficiency Slot Vented Ball for Thermal Expansion Vacuum Service to 29 inches Hg
VARIATIONS AVAILABLE:
88A-240 Series (316 SS Ball & Stem)
OPTIONS AVAILABLE:
(SUFFIX) -01-10-14-15-21-24-35-38-49-60-65-67-69-70-73-74OPTION Standard (Locking Kit and Grounded Stem) SS Lever and Nut Side Vented Ball (See Page J-2) Wheel Handle UHMWPE Seats Fire Safe (Graphite Packing and Seal) PTFE Seats and Seals PEEK Seats and Graphite Packing Assembled Dry Grounded Ball and Stem MPTFE Seats and Graphite Packing Cleaned For Industrial Gases Drilled and Tapped Purge Port with Plug 4" Extended Bonnet 316 SS Spiral Wound Gaskets w/PTFE Filler 316 SS Spiral Wound Gaskets w/Graphite Filler
MATERIALS OF CONSTRUCTION
Description 1. Body 2. Retainer 3. Ball 4. Stem 5. Packing Gland 6. Stem Seals 7. Seats 8. Gland Screws 9. Gland Plate 10. Stem Nut 11. Lever 12. Stem Bearing 13. Stop 14. Stop Screw 15. Lock Plate 16. Body Seal 17. Lockwasher 18. Grounding Spring Material ASTM A216 WCB ASTM A108 Type 1215 ASTM A108 Type 1215 ASTM A108 Type 1215 ASTM A108 Type 1215 PTFE RPTFE ASTM A193 B7 302 or 304 SS 316 SS ASTM A366 Steel with Vinyl Grip RPTFE ASTM A108 Type 1215 SAE J429 Grade 2 ASTM A366 Steel RPTFE 302 or 304 SS SS
D-16
1/00
88A-200 Series Valve Carbon Steel ANSI Class 150 Flanged Full Port Ball
STANDARD FEATURES
Two Position Locking Device Antistatic Grounded Stem CHV Style Adjustable Stem Seals Blow-out Proof Stem Design Cast Bosses for Bleed / Drain Ports Four Point ISO 5211 Mounting Pad Bolt Circle Full Bore Design for Maximum Flow Efficiency Slot Vented Ball for Thermal Expansion Vacuum Service to 29 inches Hg
VARIATIONS AVAILABLE:
88A-240 Series (316 SS Ball & Stem)
OPTIONS AVAILABLE:
(SUFFIX) -01-10-14-15-21-24-35-38-49-59-60-65-67-69-70-73-74-MG-MH-MJ-MKOPTION Standard (Locking Kit and Grounded Stem) SS Lever and Nut Side Vented Ball (See Page J-2) Wheel Handle UHMWPE Seats Fire Safe (Graphite Packing and Seal) PTFE Seats and Seals PEEK Seats and Graphite Packing Assembled Dry SS External Trim Grounded Ball and Stem MPTFE Seats and Graphite Packing Cleaned For Industrial Gases Drilled and Tapped Purge Ports with Plugs 4" Extended Bonnet (4" & 6" Valves Only) 316 SS Spiral Wound Gaskets w/PTFE Filler 316 SS Spiral Wound Gaskets w/Graphite Filler Gear Operator with Standard Handwheel Gear Operator with Standard Handwheel & Locking Device Gear Operator with Oversize Handwheel Gear Operator with Oversize Handwheel & Locking Device
MATERIALS OF CONSTRUCTION
Description 1. Body 2. Retainer 3. Ball 4. Stem 5. Packing Gland 6. Stem Seals 7. Seats 8. Gland Screws 9. Gland Plate 10. Stem Nut 11. Lever 12. Stem Bearing 13. Stop 14. Stop Screw 15. Lock Plate 16. Body Seal 17. Grounding Spring 18. Body Joint Stud 19. Body Joint Nut 20. Lockwasher Material ASTM A216 WCB ASTM A216 WCB ASTM A216 WCB or A216 WCB ASTM A108 Type 1215 ASTM A108 Type 1215 PTFE RPTFE ASTM A193 B7 302 & 304 SS ASTM A194 Grade 8l ASTM A366 Steel with Vinyl Grip RPTFE ASTM A108 Type 1215 SAE J429 Grade 2 ASTM A366 Steel RPTFE SS ASTM A193 Grade B7 ASTM A194 Grade 2H 302 or 304 SS
1/00
D-17
88A-200 Series Valve Carbon Steel ANSI Class 150 Flanged Full Port Ball
STANDARD FEATURES
Two Position Locking Device Antistatic Grounded Stem CHV Style Adjustable Stem Seals Blow-out Proof Stem Design Cast Bosses for Bleed / Drain Ports Four Point ISO 5211 Mounting Pad Bolt Circle Full Bore Design for Maximum Flow Efficiency Slot Vented Ball for Thermal Expansion Vacuum Service to 29 inches Hg
VARIATIONS AVAILABLE:
88A-240 Series (316 SS Ball & Stem)
OPTIONS AVAILABLE:
(SUFFIX) -01-14-21-24-35-38-49-59-60-65-67-69-70-73-74-MG-MH-MJ-MKOPTION Standard (Locking Kit and Grounded Stem) Side Vented Ball (See Page J-2) UHMWPE Seats Fire Safe (Graphite Packing and Seal) PTFE Seats and Seals PEEK Seats and Graphite Packing Assembled Dry SS External Trim Grounded Ball and Stem MPTFE Seats and Graphite Packing Cleaned For Industrial Gases Drilled and Tapped Purge Port with Plug 4" Extended Bonnet 316 SS Spiral Wound Gaskets w/PTFE Filler 316 SS Spiral Wound Gaskets w/Graphite Filler Gear Operator with Standard Handwheel Gear Operator with Standard Handwheel & Locking Device Gear Operator with Oversize Handwheel Gear Operator with Oversize Handwheel & Locking Device
MATERIALS OF CONSTRUCTION
Description 1. Body 2. Retainer 3. Ball 4. Stem 5. Packing Gland 6. Stem Seals 7. Seats 8. Gland Screws 9. Gland Plate 10. Adapter Screw 11. Handle Adapter 12. Stem Bearing 13. Stop 14. Stop Screw 15. Lock Plate 16. Body Seal 17. Grounding Spring 18. Body Joint Stud 19. Body Joint Nut 20. Pipe Handle Material ASTM A216 WCB ASTM A216 WCB ASTM A108 Type 1215 or A216 WCB ASTM A108 Type 1215 ASTM A108 Type 1215 PTFE RPTFE ASTM A193 B7 316 SS 316 SS ASTM A366 Steel with Vinyl Grip RPTFE ASTM A108 Type 1215 SAE J429 Grade 2 ASTM A366 Steel RPTFE SS ASTM A193 Grade B7 ASTM A194 Grade 2H Galvanized Steel (not shown)
D-18
1/00
88A-700 Series Valve Carbon Steel ANSI Class 300 Flanged Std. Port Ball
STANDARD FEATURES
Two Position Locking Device Antistatic Grounded Stem CHV Style Adjustable Stem Seals Blow-out Proof Stem Design Cast Bosses for Bleed / Drain Ports Four Point ISO 5211 Mounting Pad Bolt Circle Slot Vented Ball for Thermal Expansion Vacuum Service to 29 inches Hg
VARIATIONS AVAILABLE:
88A-740 Series (316 SS Ball & Stem)
OPTIONS AVAILABLE:
(SUFFIX) -01-10-14-15-21-24-35-38-49-60-65-67-69-70-73-74OPTION Standard (Locking Kit and Grounded Stem) SS Lever and Nut Side Vented Ball (See Page J-2) Wheel Handle UHMWPE Seats Fire Safe (Graphite Packing and Seal) PTFE Seats and Seals PEEK Seats and Graphite Packing Assembled Dry Grounded Ball and Stem MPTFE Seats and Graphite Packing Cleaned For Industrial Gases Drilled and Tapped Purge Ports with Plugs 4" Extended Bonnet 316 SS Spiral Wound Gaskets w/PTFE Filler 316 SS Spiral Wound Gaskets w/Graphite Filler
MATERIALS OF CONSTRUCTION
Description 1. Body 2. Retainer 3. Ball 4. Stem 5. Packing Gland 6. Stem Seals 7. Seats 8. Gland Screws 9. Gland Plate 10. Stem Nut 11. Lever 12. Stem Bearing 13. Stop 14. Stop Screw 15. Lock Plate 16. Body Seal 17. Lockwasher 18. Grounding Spring Material ASTM A216 WCB ASTM A108 Type 1215 ASTM A108 Type 1215 ASTM A108 Type 1215 ASTM A108 Type 1215 PTFE RPTFE ASTM A193 B7 302 & 304 SS 316 SS ASTM A366 Steel with Vinyl Grip RPTFE ASTM A108 Type 1215 SAE J429 Grade 2 ASTM A366 Steel RPTFE 302 or 304 SS SS
A 1.00 1.50
B 7.50 8.50
C 4.69 5.19
D 3.62 4.62
E 6.03 6.65
F 0.47 0.72
G 1.62 2.41
H 2.15 3.09
I 1.392 1.949
J 0.696 0.974
K 0.500 0.625
L 0.287 0.412
M 1/4-20 5/16-18
N 1.50 2.00
1/00
D-19
88A-700 Series Valve Carbon Steel ANSI Class 300 Flanged Std. Port Ball
STANDARD FEATURES
Two Position Locking Device Antistatic Grounded Stem CHV Style Adjustable Stem Seals Blow-out Proof Stem Design Cast Bosses for Bleed / Drain Ports Four Point ISO 5211 Mounting Pad Bolt Circle Slot Vented Ball for Thermal Expansion Vacuum Service to 29 inches Hg
VARIATIONS AVAILABLE:
88A-740 Series (316 SS Ball & Stem)
OPTIONS AVAILABLE:
(SUFFIX) -01-10-14-15-21-24-35-38-49-59-60-65-67-69-70-73-74-MG-MH-MJ-MKOPTION Standard (Locking Kit and Grounded Stem) SS Lever and Nut Side Vented Ball (See Page J-2) Wheel Handle UHMWPE Seats Fire Safe (Graphite Packing and Seal) PTFE Seats and Seals PEEK Seats and Graphite Packing Assembled Dry SS External Trim Grounded Ball and Stem MPTFE Seats and Graphite Packing Cleaned For Industrial Gases Drilled and Tapped Purge Port with Plug 4" Extended Bonnet 316 SS Spiral Wound Gaskets w/PTFE Filler 316 SS Spiral Wound Gaskets w/Graphite Filler Gear Operator with Standard Handwheel Gear Operator with Standard Handwheel & Locking Device Gear Operator with Oversize Handwheel Gear Operator with Oversize Handwheel & Locking Device
MATERIALS OF CONSTRUCTION
Description 1. Body 2. Retainer 3. Ball 4. Stem 5. Packing Gland 6. Stem Seals 7. Seats 8. Gland Screws 9. Gland Plate 10. Stem Nut 11. Lever 12. Stem Bearing 13. Stop 14. Stop Screw 15. Lock Plate 16. Body Seal 17. Grounding Spring 18. Body Joint Stud 19. Body Joint Nut 20. Lockwasher Material ASTM A216 WCB ASTM A216 WCB ASTM A108 Type 1215 or A216 WCB ASTM A108 Type 1215 ASTM A108 Type 1215 PTFE RPTFE ASTM A193 B7 302 or 304 SS ASTM A194 Grade 8 ASTM A366 Steel with Vinyl Grip RPTFE ASTM A108 Type 1215 SAE J429 Grade 2 ASTM A366 Steel RPTFE SS ASTM A193 Grade B7 ASTM A194 Grade 2H 302 or 304 SS
A 2.00 2.50
B 9.50 11.12
C 4.75 5.56
D 5.61 6.23
E 8.40 8.40
F 0.80 0.80
G 3.31 3.93
H 4.08 4.70
I 1.949 1.949
J 0.974 0.974
K 0.750 0.750
L 0.477 0.477
M 5/16-18 5/16-18
N 2.50 3.00
D-20
1/00
88A-700 Series Valve Carbon Steel ANSI Class 300 Flanged Std. Port Ball
STANDARD FEATURES
Two Position Locking Device Antistatic Grounded Stem CHV Style Adjustable Stem Seals Blow-out Proof Stem Design Cast Bosses for Bleed / Drain Ports Four Point ISO 5211 Mounting Pad Bolt Circle Slot Vented Ball for Thermal Expansion Vacuum Service to 29 inches Hg
VARIATIONS AVAILABLE:
88A-740 Series (316 SS Ball & Stem)
OPTIONS AVAILABLE:
(SUFFIX) -01-14-21-24-35-49-59-60-65-67-69-70-73-74-MG-MH-MJ-MKOPTION Standard (Locking Kit and Grounded Stem) Side Vented Ball (See Page J-2) UHMWPE Seats Fire Safe (Graphite Packing and Seal) PTFE Seats and Seals Assembled Dry SS External Trim Grounded Ball and Stem MPTFE Seats and Graphite Packing Cleaned For Industrial Gases Drilled and Tapped Purge Ports with Plugs 4" Extended Bonnet (4" & 6" Valves Only) 316 SS Spiral Wound Gaskets w/PTFE Filler 316 SS Spiral Wound Gaskets w/Graphite Filler Gear Operator with Standard Handwheel Gear Operator with Standard Handwheel & Locking Device Gear Operator with Oversize Handwheel Gear Operator with Oversize Handwheel & Locking Device
MATERIALS OF CONSTRUCTION
Description 1. Body 2. Retainer 3. Ball 4. Stem 5. Packing Gland 6. Stem Seals 7. Seats 8. Gland Screws 9. Gland Plate 10. Adapter Screw 11. Handle Adapter 12. Stem Bearing 13. Stop 14. Stop Screw 15. Lock Plate 16. Body Seal 17. Grounding Spring 18. Body Joint Stud 19. Body Joint Nut 20. Pipe Handle Material ASTM A216 WCB ASTM A216 WCB ASTM A108 Type 1215 or A216 WCB ASTM A108 Type 1215 ASTM A108 Type 1215 PTFE RPTFE ASTM A193 B7 316 SS 316 SS ASTM A366 Steel with Vinyl Grip RPTFE ASTM A108 Type 1215 SAE J429 Grade 2 ASTM A366 Steel RPTFE SS ASTM A193 Grade B7 ASTM A194 Grade 2H Galvanized Steel (not shown)
1/00
D-21
88A-900 Series Valve Carbon Steel ANSI Class 300 Flanged Full Port Ball
STANDARD FEATURES
Two Position Locking Device Antistatic Grounded Stem CHV Style Adjustable Stem Seals Blow-out Proof Stem Design Cast Bosses for Bleed / Drain Ports Four Point ISO 5211 Mounting Pad Bolt Circle Full Bore Design for Maximum Flow Efficiency Slot Vented Ball for Thermal Expansion Vacuum Service to 29 inches Hg
VARIATIONS AVAILABLE:
88A-940 Series (316 SS Ball & Stem)
OPTIONS AVAILABLE:
(SUFFIX) -01-10-14-15-21-24-35-38-49-60-65-67-69-70-73-74OPTION Standard (Locking Kit and Grounded Stem) SS Lever and Nut Side Vented Ball (See Page J-2) Wheel Handle UHMWPE Seats Fire Safe (Graphite Packing and Seal) PTFE Seats and Seals PEEK Seats and Graphite Packing Assembled Dry Grounded Ball and Stem MPTFE Seats and Graphite Packing Cleaned For Industrial Gases Drilled and Tapped Purge Port with Plug 4" Extended Bonnet 316 SS Spiral Wound Gaskets w/PTFE Filler 316 SS Spiral Wound Gaskets w/Graphite Filler
MATERIALS OF CONSTRUCTION
Description 1. Body 2. Retainer 3. Ball 4. Stem 5. Packing Gland 6. Stem Seals 7. Seats 8. Gland Screws 9. Gland Plate 10. Stem Nut 11. Lever 12. Stem Bearing 13. Stop 14. Stop Screw 15. Lock Plate 16. Body Seal 17. Lockwasher 18. Grounding Spring Material ASTM A216 WCB ASTM A108 Type 1215 ASTM A108 Type 1215 ASTM A108 Type 1215 ASTM A108 Type 1215 PTFE RPTFE ASTM A193 B7 302 or 304 SS 316 SS ASTM A366 Steel with Vinyl Grip RPTFE ASTM A108 Type 1215 SAE J429 Grade 2 ASTM A366 Steel RPTFE 302 or 304 SS SS
1.00
6.50
3.82
3.62
6.03
0.47
1.62
2.15
1.392
0.696
0.500
0.287
1/4-20
D-22
1/00
88A-900 Series Valve Carbon Steel ANSI Class 300 Flanged Full Port Ball
STANDARD FEATURES
Two Position Locking Device Antistatic Grounded Stem CHV Style Adjustable Stem Seals Blow-out Proof Stem Design Cast Bosses for Bleed / Drain Ports Four Point ISO 5211 Mounting Pad Bolt Circle Full Bore Design for Maximum Flow Efficiency Slot Vented Ball for Thermal Expansion Vacuum Service to 29 inches Hg
VARIATIONS AVAILABLE:
88A-940 Series (316 SS Ball & Stem)
OPTIONS AVAILABLE:
(SUFFIX) -01-14-15-21-24-35-38-49-59-60-65-67-69-70-73-74-MG-MH-MJ-MKOPTION Standard (Locking Kit and Grounded Stem) Side Vented Ball (See Page J-2) Wheel Handle UHMWPE Seats Fire Safe (Graphite Packing and Seal) PTFE Seats and Seals PEEK Seats and Graphite Packing Assembled Dry SS External Trim Grounded Ball and Stem MPTFE Seats and Graphite Packing Cleaned For Industrial Gases Drilled and Tapped Purge Ports with Plugs 4" Extended Bonnet 316 SS Spiral Wound Gaskets w/PTFE Filler 316 SS Spiral Wound Gaskets w/Graphite Filler Gear Operator with Standard Handwheel Gear Operator with Standard Handwheel & Locking Device Gear Operator with Oversize Handwheel Gear Operator with Oversize Handwheel & Locking Device
MATERIALS OF CONSTRUCTION
Description 1. Body 2. Retainer 3. Ball 4. Stem 5. Packing Gland 6. Stem Seals 7. Seats 8. Gland Screws 9. Gland Plate 10. Stem Nut 11. Lever 12. Stem Bearing 13. Stop 14. Stop Screw 15. Lock Plate 16. Body Seal 17. Grounding Spring 18. Body Joint Stud 19. Body Joint Nut 20. Lockwasher Material ASTM A216 WCB ASTM A216 WCB ASTM A216 WCB or A216 WCB ASTM A108 Type 1215 ASTM A108 Type 1215 PTFE RPTFE ASTM A193 B7 302 & 304 SS ASTM A194 Grade 8l ASTM A366 Steel with Vinyl Grip RPTFE ASTM A108 Type 1215 SAE J429 Grade 2 ASTM A366 Steel RPTFE SS ASTM A193 Grade B7 ASTM A194 Grade 2H 302 or 304 SS
1/00
D-23
88A-900 Series Valve Carbon Steel ANSI Class 300 Flanged Full Port Ball
STANDARD FEATURES
Two Position Locking Device Antistatic Grounded Stem CHV Style Adjustable Stem Seals Blow-out Proof Stem Design Cast Bosses for Bleed / Drain Ports Four Point ISO 5211 Mounting Pad Bolt Circle Full Bore Design for Maximum Flow Efficiency Slot Vented Ball for Thermal Expansion Vacuum Service to 29 inches Hg
OPTIONS AVAILABLE:
(SUFFIX) -01-14-21-24-35-38-49-59-60-65-67-69-70-73-74-MG-MH-MJ-MKOPTION Standard (Locking Kit and Grounded Stem) Side Vented Ball (See Page J-2) UHMWPE Seats Fire Safe (Graphite Packing and Seal) PTFE Seats and Seals PEEK Seats and Graphite Packing Assembled Dry SS External Trim Grounded Ball and Stem MPTFE Seats and Graphite Packing Cleaned For Industrial Gases Drilled and Tapped Purge Ports with Plugs 4" Extended Bonnet 316 SS Spiral Wound Gaskets w/PTFE Filler 316 SS Spiral Wound Gaskets w/Graphite Filler Gear Operator with Standard Handwheel Gear Operator with Standard Handwheel & Locking Device Gear Operator with Oversize Handwheel Gear Operator with Oversize Handwheel & Locking Device
MATERIALS OF CONSTRUCTION
Description 1. Body 2. Retainer 3. Ball 4. Stem 5. Packing Gland 6. Stem Seals 7. Seats 8. Gland Screws 9. Gland Plate 10. Adapter Screw 11. Handle Adapter 12. Stem Bearing 13. Stop 14. Stop Screw 15. Lock Plate 16. Body Seal 17. Grounding Spring 18. Body Joint Stud 19. Body Joint Nut 20. Pipe Handle Material ASTM A216 WCB ASTM A216 WCB ASTM A216 WCB or A216 WCB ASTM A108 Type 1215 ASTM A108 Type 1215 PTFE RPTFE ASTM A193 B7 316 SS 316 SS ASTM A366 Steel with Vinyl Grip RPTFE ASTM A108 Type 1215 SAE J429 Grade 2 ASTM A366 Steel RPTFE SS ASTM A193 Grade B7 ASTM A194 Grade 2H Galvanized Steel (not shown)
D-24
1/00
87-100 Series Valve Stainless Steel ANSI Class 150 Flanged Ball
ANSI Class 150 Flanged Ends, 275 psig WOG, Cold Non-Shock. 150 psig Saturated Steam. Vacuum Service to 29 inches Hg. Federal Specification: WW-V-35C, Type: II, Composition: SS, Style: 3.
OPTIONS AVAILABLE:
(SUFFIX) -02-03-04-08-14-15-18-21-24-27-35-47-48-49-57-60-65OPTION Static Grounded 1-1/4" Stem Extension 2-1/4" Stem Extension 90 Reversed Stem Vented Ball (see page J-2) Round Handle Plain Yellow Grip UHMWPE Seats (Non-PTFE) Graphite Stem Packing Latch Lock Lever PTFE Trim SS Oval Latch-Lock Handle SS Oval Handle Assembled Dry Cleaned For Gaseous Oxygen Static Grounded Ball & Stem Multifill Seats & Graphite Packing SIZES 1/2" to 1" 1/2" to 1" 1/2" to 1" 1/2" to 1" 1/2" to 1" 1/2" to 1" 1/2" to 1" 1/2" to 1" 1/2" to 1" 1/2" to 1" 1/2" to 1" 1/2" to 1" 1/2" to 1" 1/2" to 1" 1/2" to 1" 1/2" to 1" 1/2" to 1"
D-25
87-100 Series Valve Stainless Steel ANSI Class 150 Flanged Ball
ANSI Class 150 Flanged Ends, 275 psig WOG, Cold Non-Shock. 150 psig Saturated Steam. Vacuum Service to 29 inches Hg. Federal Specification: WW-V-35C, Type: II, Composition: SS, Style: 3.
OPTIONS AVAILABLE:
(SUFFIX) -02-03-04-08-14-15-18-19-21-24-35-49-57-60-65-69-MGOPTION Static Grounded 1-1/4" Stem Extension 2-1/4" Stem Extension 90 Reversed Stem Vented Ball (see page J-2) Round Handle Plain Yellow Grip Lock Plate UHMWPE Seats (Non-PTFE) Graphite Stem Packing PTFE Trim Assembled Dry Cleaned For Gaseous Oxygen Static Grounded Ball & Stem Multifill Seats & Graphite Packing Purge Ports Gear Operator & Hand Wheel SIZES 1-1/2" to 2-1/2" 1-1/2" to 2-1/2" 1-1/2" to 2-1/2" 1-1/2" to 2-1/2" 1-1/2" to 2-1/2" 1-1/2" to 2-1/2" 1-1/2" to 2-1/2" 1-1/2" to 2-1/2" 1-1/2" to 2-1/2" 1-1/2" to 2-1/2" 1-1/2" to 2-1/2" 1-1/2" to 2-1/2" 1-1/2" to 2-1/2" 1-1/2" to 2-1/2" 1-1/2" to 2-1/2" 2-1/2" 1-1/2" to 2-1/2"
D-26
87-100 Series Valve Stainless Steel ANSI Class 150 Flanged Ball
ANSI Class 150 Flanged Ends, 275 psig WOG, Cold Non-Shock. 150 psig Saturated Steam. Vacuum Service to 29 inches Hg. Federal Specification: WW-V-35C, Type: II, Composition: SS, Style: 3.
OPTIONS AVAILABLE:
(SUFFIX) -14-19-21-35-49-57-60-65-68-69-MGOPTION Vented Ball (see page J-2) Lock Plate UHMWPE Seats (Non-PTFE) PTFE Trim Assembled Dry Cleaned For Gaseous Oxygen Static Grounded Ball & Stem Multifill Seats & Graphite Packing 4" Stem Extension Purge Ports Gear Operator & Hand Wheel SIZES 3" to 10" 3" to 10" 3" to 10" 3" to 10" 3" to 10" 3" to 10" 3" to 10" 3" to 10" 3" to 6" 3" to 10" 3" to 10"
Contact factory for actuator mounting dimensions. * Hollow balls are standard on 8 and 10 valves SS ANSI CLASS 150 FLANGED BALL VALVE (3" to 10")
NUMBER SIZE 87-100-01 3" 87-10A-01 4" 87-10C-01 6" 87-10E-01 8" 87-10G-01 10" A 2.50 3.25 4.50 6.00 7.50 B .75 .75 .87 .87 1.00 C 8.00 9.00 10.50 11.50 13.00 D E F G H I 2.56 6.00 18.00 5.12 6.38 4 3.22 7.50 18.00 6.22 7.38 8 4.12 9.50 18.00 7.09 8.25 8 5.75 11.75 18.00 9.31 10.43 8 6.50 14.25 30.00 10.50 11.87 12 J 5.00 6.18 8.50 10.62 12.75 K 7.50 9.00 11.00 13.50 16.00 L Wt. .75 35.8 .93 55.0 1.00 104.0 1.18 185.0 1.31 280.0
D-27
87-200 Series Ball Valve Stainless Steel ANSI Class 150 Flanged Full Port
ANSI Class 150 Flanged Ends, 275 psig WOG, Cold Non-Shock. 150 psig Saturated Steam. Vacuum Service to 29 inches Hg. Federal Specification: WW-V-35C, Type: II, Composition: SS, Style: 3.
FEATURES (1")
Investment cast body Meets NACE MR-01-75 Adjustable packing gland Positive shut-off RPTFE seats and seals Corrosion resistant Certified to API standard 607, 4th Edition, when (-24) ordered Blow-out-proof stem design Field repairable Unibody design Actuator mounting provisions
OPTIONS AVAILABLE:
(SUFFIX) -02-03-04-08-14-15-18-24-27-35-39-49-57-60-65OPTION Static Grounded 1-1/4" Stem Extension 2-1/4" Stem Extension 90 Reversed Stem Vented Ball (see page J-2) Round Handle Plain Yellow Grip Graphite Stem Packing Latch Lock Lever PTFE Trim SS Hi-Rise Locking Wheel Handle Assembled Dry Cleaned For Gaseous Oxygen Static Grounded Ball & Stem Multifill Seats & Graphite Packing SIZES 1" 1" 1" 1" 1" 1" 1" 1" 1" 1" 1" 1" 1" 1" 1"
D-28
87-200 Series Ball Valve Stainless Steel ANSI Class 150 Flanged Full Port
ANSI Class 150 Flanged Ends, 275 psig WOG, Cold Non-Shock. 150 psig Saturated Steam. Vacuum Service to 29 inches Hg. Federal Specification: WW-V-35C, Type: II, Composition: SS, Style: 3.
OPTIONS AVAILABLE:
(SUFFIX) -02-03-04-08-14-15-18-19-24-35-49-57-60-65-69-MGOPTION Static Grounded 1-1/4" Stem Extension 2-1/4" Stem Extension 90 Reversed Stem Vented Ball (see page J-2) Round Handle Plain Yellow Grip Lock Plate Graphite Stem Packing PTFE Trim Assembled Dry Cleaned For Gaseous Oxygen Static Grounded Ball & Stem Multifill Seats & Graphite Packing Purge Ports Gear Operator & Hand Wheel SIZES 1-1/2" to 2-1/2" 1-1/2" to 2-1/2" 1-1/2" to 2-1/2" 1-1/2" to 2-1/2" 1-1/2" to 2-1/2" 1-1/2" to 2-1/2" 1-1/2" to 2-1/2" 1-1/2" to 2-1/2" 1-1/2" to 2-1/2" 1-1/2" to 2-1/2" 1-1/2" to 2-1/2" 1-1/2" to 2-1/2" 1-1/2" to 2-1/2" 1-1/2" to 2-1/2" 2" to 2-1/2" 1-1/2" to 2-1/2"
SS ANSI CLASS 150 FULL PORT FLANGED BALL VALVE (1-1/2" to 2-1/2")
NUMBER SIZE 87-207-01 1-1/2" 87-208-01 2" 87-209-01 2-1/2" A B 1.50 .62 2.00 .75 2.50 .75 C D 6.50 3.25 7.00 3.50 7.50 3.75 E 3.87 4.75 5.50 F 8.00 8.00 8.00 G 4.31 4.75 5.12 H 4 4 4 I 5.00 6.00 7.00 J 2.87 3.62 4.12 K .68 .68 .81 Wt. 18.2 26.4 37.0
D-29
87-200 Series Ball Valve Stainless Steel ANSI Class 150 Flanged Full Port
ANSI Class 150 Flanged Ends, 275 psig WOG, Cold Non-Shock. 150 psig Saturated Steam. Vacuum Service to 29 inches Hg. Federal Specification: WW-V-35C, Type: II, Composition: SS, Style: 3.
OPTIONS AVAILABLE:
(SUFFIX) -14-19-35-49-57-60-65-68-69-MGOPTION Vented Ball (see page J-2) Lock Plate PTFE Trim Assembled Dry Cleaned For Gaseous Oxygen Static Grounded Ball & Stem Multifill Seats & Graphite Packing 4" Stem Extension Purge Ports Gear Operator & Hand Wheel SIZES 3" to 6" 3" to 6" 3" to 6" 3" to 6" 3" to 6" 3" to 6" 3" to 6" 3" to 4" 3" to 6" 3" to 6"
SS ANSI CLASS 150 FULL PORT FLANGED BALL VALVE (3" to 6")
NUMBER SIZE 87-200-01 3" 87-20A-01 4" 87-20C-01 6" A B C D 3.00 .75 8.00 4.00 4.00 .75 9.00 5.25 6.00 .87 15.50 7.75 E F G H 6.00 18.00 6.00 7.25 7.50 18.00 7.62 8.87 9.50 18.00 8.62 9.87 I 4 8 8 J K L Wt. 5.00 7.50 .75 58.3 6.18 9.00 .93 98.0 8.50 11.00 1.00 212.0
D-30
87-200 Series Ball Valve Stainless Steel ANSI Class 150 Flanged Full Port
ANSI Class 150 Flanged Ends, 275 psig WOG, Cold Non-Shock. 150 psig Saturated Steam. Vacuum Service to 29 inches Hg. Federal Specification: WW-V-35C, Type: II, Composition: SS, Style: 3.
OPTIONS AVAILABLE:
(SUFFIX) -14-35-49-57-60-65-69OPTION Vented Ball (see page J-2) PTFE Trim Assembled Dry Cleaned For Gaseous Oxygen Static Grounded Ball & Stem Multifill Seats & Graphite Packing Purge Ports SIZES 8" to 12" 8" to 12" 8" to 12" 8" to 12" 8" to 12" 8" to 12" 8" to 12"
Contact factory for actuator mounting dimensions. * Hollow balls are standard. SS ANSI CLASS 150 FULL PORT FLANGED BALL VALVE (8" to 12")
NUMBER SIZE A B C D E F G H I J K L 87-20E-01 8" 8.00 .87 18.00 9.00 11.75 18.00 13.59 11.12 8 10.62 13.50 1.18 87-20G-01 10" 10.00 1.00 21.00 10.50 14.25 24.00 15.57 17.37 12 12.75 16.00 1.31 87-20H-01 12" 12.00 1.00 24.00 12.00 17.00 24.00 17.07 17.37 12 15.00 19.00 1.43
D-31
87-700 Series Valve Stainless Steel ANSI Class 300 Flanged Ball
ANSI Class 300 Flanged Ends, 720 psig WOG, Cold Non-Shock. 150 psig Saturated Steam. Vacuum Service to 29 inches Hg. Federal Specification: WW-V-35C, Type: II, Composition: SS, Style: 3.
FEATURES (2")
Graphite stem packing Meets NACE MR-01-75 Adjustable packing gland Unibody construction RPTFE seats and seals Corrosion resistant Certified to API standard 607, 4th Edition Blow-out-proof stem design Field repairable Positive shut-off Actuator mounting provisions
OPTIONS AVAILABLE:
(SUFFIX) -03-04-08-14-15-18-19-35-49-57-60-65-MGOPTION 1-1/4" Stem Extension 2-1/4" Stem Extension 90 Reversed Stem Vented Ball (see page J-2) Round Handle Plain Yellow Grip Lock Plate PTFE Trim Assembled Dry Cleaned For Gaseous Oxygen Static Grounded Ball & Stem Multifill Seats & Graphite Packing Gear Operator & Hand Wheel SIZES 2" 2" 2" 2" 2" 2" 2" 2" 2" 2" 2" 2" 2"
D-32
87-700 Series Valve Stainless Steel ANSI Class 300 Flanged Ball
ANSI Class 300 Flanged Ends, 720 psig WOG, Cold Non-Shock. 150 psig Saturated Steam. Vacuum Service to 29 inches Hg. Federal Specification: WW-V-35C, Type: II, Composition: SS, Style: 3.
OPTIONS AVAILABLE:
Contact factory for actuator mounting dimensions. * Hollow balls are standard on 8 and 10 valves
(SUFFIX) -14-19-35-49-57-60-65-68-69-MGOPTION Vented Ball (see page J-2) Lock Plate PTFE Trim Assembled Dry Cleaned For Gaseous Oxygen Static Grounded Ball & Stem Multifill Seats & Graphite Packing 4" Stem Extension Purge Ports Gear Operator & Hand Wheel SIZES 3" to 10" 3" to 10" 3" to 6" 3" to 10" 3" to 10" 3" to 10" 3" to 10" 3" to 4" 3" to 10" 3" to 10"
D-33
87-808600 Flanged Ball Valve Series Stainless Steel 2" ANSI Class
ANSI Class 600 Flanged Ends, 1440 psig WOG, Cold Non-Shock. 150 psig Saturated Steam. On-Off Service. Federal Specification: WW-V-35C
FEATURES
Investment cast body Unibody design Adjustable packing gland Positive shut-off RPTFE seats and seals Corrosion resistant Certified to API standard 607, 3rd Edition, when (-24) ordered Blow-out-proof stem design Meets NACE MR-01-75
D-34
88-808 Series
FEATURES
Blow-out-proof stem design Corrosion resistant
Investment cast body Positive shut-off Adjustable packing gland Unibody design RPTFE seats and seals Nitride corrosion protection Certified to API standard 607, 3rd Edition, when (-24) ordered
VARIATIONS AVAILABLE:
88-848-01 Series (316 SS Ball & Stem)
D-35
87-900 Series Ball Valve Stainless Steel ANSI Class 300 Flanged Full Port
ANSI Class 300 Flanged Ends, 720 psig WOG, Cold Non-Shock. 150 psig Saturated Steam. Vacuum Service to 29 inches Hg. Federal Specification: WW-V-35C, Type: II, Composition: SS, Style: 3.
OPTIONS AVAILABLE:
(SUFFIX) -02-03-04-08-14-15-18-24-27-35-47-48-49-57-60-65OPTION Static Grounded 1-1/4" Stem Extension 2-1/4" Stem Extension 90 Reversed Stem Vented Ball (see page J-2) Round Handle Plain Yellow Grip Graphite Stem Packing Latch Lock Lever PTFE Trim SS Oval Latch-Lock Handle SS Oval Handle Assembled Dry Cleaned For Gaseous Oxygen Static Grounded Ball & Stem Multifill Seats & Graphite Packing SIZES 1/2" to 1-1/2" 1/2" to 1-1/2" 1/2" to 1-1/2" 1/2" to 1-1/2" 1/2" to 1-1/2" 1/2" to 1-1/2" 1/2" to 1-1/2" 1/2" to 1-1/2" 1/2" to 1-1/2" 1/2" to 1-1/2" 1/2" to 1" 1/2" to 1" 1/2" to 1-1/2" 1/2" to 1-1/2" 1/2" to 1-1/2" 1/2" to 1-1/2"
D-36
87-900 Series Ball Valve Stainless Steel ANSI Class 300 Flanged Full Port
ANSI Class 300 Flanged Ends, 720 psig WOG, Cold Non-Shock. 150 psig Saturated Steam. Vacuum Service to 29 inches Hg. Federal Specification: WW-V-35C, Type: II, Composition: SS, Style: 3.
FEATURES (2")
Investment cast body Meets NACE MR-01-75 Adjustable packing gland Positive shut-off RPTFE seats Corrosion resistant Certified to API standard 607, 4th Edition, when (-24) ordered Blow-out-proof stem design Field repairable Bolted body design Actuator mounting provisions
OPTIONS AVAILABLE:
(SUFFIX) -02-03-04-08-14-15-18-19-24-35-49-57-60-65-69-MGOPTION Static Grounded 1-1/4" Stem Extension 2-1/4" Stem Extension 90 Reversed Stem Vented Ball (see page J-2) Round Handle Plain Yellow Grip Lock Plate Graphite Stem Packing PTFE Trim Assembled Dry Cleaned For Gaseous Oxygen Static Grounded Ball & Stem Multifill Seats & Graphite Packing Purge Ports Gear Operator & Hand Wheel SIZES 2" 2" 2" 2" 2" 2" 2" 2" 2" 2" 2" 2" 2" 2" 2" 2"
D-37
87-900 Series Ball Valve Stainless Steel ANSI Class 300 Flanged Full Port
ANSI Class 300 Flanged Ends, 720 psig WOG, Cold Non-Shock. 150 psig Saturated Steam. Vacuum Service to 29 inches Hg. Federal Specification: WW-V-35C, Type: II, Composition: SS, Style: 3.
OPTIONS AVAILABLE:
(SUFFIX) -14-19-35-49-57-60-65-68-69-MGOPTION Vented Ball (see page J-2) Lock Plate PTFE Trim Assembled Dry Cleaned For Gaseous Oxygen Static Grounded Ball & Stem Multifill Seats & Graphite Packing 4" Stem Extension Purge Ports Gear Operator & Hand Wheel SIZES 3" to 6" 3" to 6" 3" to 6" 3" to 6" 3" to 6" 3" to 6" 3" to 6" 3" to 4" 3" to 6" 3" to 6"
D-38
87-900 Series Ball Valve Stainless Steel ANSI Class 300 Flanged Full Port
ANSI Class 300 Flanged Ends, 720 psig WOG, Cold Non-Shock. 150 psig Saturated Steam. Vacuum Service to 29 inches Hg. Federal Specification: WW-V-35C, Type: II, Composition: SS, Style: 3.
FEATURES (8")
Graphite stem packing Meets NACE MR-01-75 Adjustable packing gland Bolted body design RPTFE seats Corrosion resistant Certified to API standard 607, 4th Edition Blow-out-proof stem design Field repairable Positive shut-off Actuator mounting provisions
OPTIONS AVAILABLE:
(SUFFIX) -14-35-49-57-60-65-69OPTION Vented Ball (see page J-2) PTFE Trim Assembled Dry Cleaned For Gaseous Oxygen Static Grounded Ball & Stem Multifill Seats & Graphite Packing Purge Ports SIZES 8" 8" 8" 8" 8" 8" 8"
Contact factory for actuator mounting dimensions. SS ANSI CLASS 300 FULL PORT FLANGED BALL VALVE (8")
NUMBER SIZE 87-90E-01 8"
A B C D E F G H I J K L Wt. 8.00 1.00 16.50 8.25 13.00 18.00 14.48 11.12 12 10.62 15.00 1.68 485.0
D-39
88-100 Series
Blow-out-proof stem design Field repairable Nitride corrosion protection Actuator mounting provisions
VARIATIONS AVAILABLE:
88-140 Series (316 SS Ball & Stem)
OPTIONS AVAILABLE:
(SUFFIX) -02-03-04-08-10-14-15-18-21-24-35-47-48-65-67OPTION Static Grounded 1-1/4" Stem Extension 2-1/4" Stem Extension 90 Reversed Stem SS Lever & Nut Vented Ball (see page J-2) Round Handle Plain Yellow Grip UHMWPE Seats (Non-PTFE) Graphite Stem Packing PTFE Trim SS Oval Latch-Lock Handle SS Oval Handle Multifill Seats & Graphite Packing Cleaned For Industrial Gases SIZES 1/2" to 1" 1/2" to 1" 1/2" to 1" 1/2" to 1" 1/2" to 1" 1/2" to 1" 1/2" to 1" 1/2" to 1" 1/2" to 1" 1/2" to 1" 1/2" to 1" 1/2" to 1" 1/2" to 1" 1/2" to 1" 1/2" to 1"
CARBON STEEL ANSI CLASS 150 FLANGED BALL VALVE (1/2" to 1")
NUMBER SIZE 88-103-01 1/2" 88-104-01 3/4" 88-105-01 1" A .50 .62 .87 B .62 .62 .62 C D 4.25 1.87 4.62 1.91 5.00 1.94 E 2.37 2.75 3.12 F 4.37 4.87 4.87 G 2.56 2.93 3.12 H 4 4 4 I 3.50 3.88 4.25 J 1.38 1.69 2.00 K .43 .50 .50 Wt. 3.2 4.5 6.1
D-40
88-100 Series
Blow-out-proof stem design Field repairable Nitride corrosion protection Actuator mounting provisions
VARIATIONS AVAILABLE:
88-140 Series (316 SS Ball & Stem)
OPTIONS AVAILABLE:
(SUFFIX) -02-03-04-08-10-14-15-18-21-24-35-65-67-69-MGOPTION Static Grounded 1-1/4" Stem Extension 2-1/4" Stem Extension 90 Reversed Stem SS Lever & Nut Vented Ball (see page J-2) Round Handle Plain Yellow Grip UHMWPE Seats (Non-PTFE) Graphite Stem Packing PTFE Trim Multifill Seats & Graphite Packing Cleaned for Industrial Gases Purge Ports Gear Operator & Hand Wheel SIZES 1-1/2" to 2-1/2" 1-1/2" to 2-1/2" 1-1/2" to 2-1/2" 1-1/2" to 2-1/2" 1-1/2" to 2-1/2" 1-1/2" to 2-1/2" 1-1/2" to 2-1/2" 1-1/2" to 2-1/2" 1-1/2" to 2-1/2" 1-1/2" to 2-1/2" 1-1/2" to 2-1/2" 1-1/2" to 2-1/2" 1-1/2" to 2-1/2" 2-1/2" 1-1/2" to 2-1/2"
CARBON STEEL ANSI CLASS 150 FLANGED BALL VALVE (1-1/2" to 2-1/2")
NUMBER SIZE 88-107-01 1-1/2" 88-108-01 2" 88-109-01 2-1/2" A B 1.25 .62 1.50 .75 2.00 .75 C D 6.50 2.25 7.00 2.54 7.50 2.63 E 3.87 4.75 5.50 F 8.00 8.00 8.00 G 3.81 4.12 4.84 H 4 4 4 I 5.00 6.00 7.00 J 2.87 3.62 4.12 K .62 .62 .81 Wt. 12.0 17.3 28.0
D-41
88-100 Series
VARIATIONS AVAILABLE:
88-140 Series (316 SS Ball & Stem)
OPTIONS AVAILABLE:
(SUFFIX) -14-19-21-35-65-67-68-69-MGOPTION Vented Ball (see page J-2) Lock Plate UHMWPE Seats (Non-PTFE) PTFE Trim Multifill Seats & Graphite Packing Cleaned for Industrial Gases 4" Stem Extension Purge Ports Gear Operator & Hand Wheel SIZES 3" to 10" 3" to 10" 3" to 10" 3" to 10" 3" to 10" 3" to 10" 3" to 6" 3" to 10" 3" to 10"
Contact factory for actuator mounting dimensions. * Hollow balls are standard on 8 and 10 valves CARBON STEEL ANSI CLASS 150 FLANGED BALL VALVE (3" to 10")
NUMBER SIZE 88-100-01 3" 88-10A-01 4" 88-10C-01 6" 88-10E-01 8" 88-10G-01 10" A 2.50 3.25 4.50 6.00 7.50 B .75 .75 .87 .87 1.00 C 8.00 9.00 10.50 11.50 13.00 D E F 2.56 6.00 18.00 3.22 7.50 18.00 4.12 9.50 18.00 5.75 11.75 18.00 6.50 14.25 30.00 G 5.12 6.22 7.09 9.31 10.50 H 6.38 7.38 8.25 10.43 11.87 I J K 4 5.00 7.50 8 6.18 9.00 8 8.50 11.00 8 10.62 13.50 12 12.75 16.00 L .75 .93 1.00 1.18 1.31 Wt. 35.1 54.5 104.0 185.0 280.0
D-42
88-200 Series
FEATURES (1")
Field repairable Unibody construction Actuator mounting provisions
Carbon Steel ANSI Class 150 Flanged Full Port Ball Valve
ANSI Class 150 Flanged Ends, 275 psig WOG, Cold Non-Shock. 150 psig Saturated Steam. Vacuum Service to 29 inches Hg. Federal Specification: WW-V-35C, Type: II, Composition: CS, Style: 3.
Investment cast body Blow-out-proof stem design Adjustable packing gland Positive shut-off RPTFE seats and seals Corrosion resistant Certified to API standard 607, 4th Edition when (-24) ordered
VARIATIONS AVAILABLE:
88-240 series (SS Ball & Stem)
OPTIONS AVAILABLE:
(SUFFIX) -02-03-04-08-14-15-18-24-27-35-39-49-60-65-67OPTION Static Grounded 1-1/4" Stem Extension 2-1/4" Stem Extension 90 Reversed Stem Vented Ball (see page J-2) Round Handle Plain Yellow Grip Graphite Stem Packing Latch Lock Lever PTFE Trim SS Hi-Rise Locking Wheel Handle Assembled Dry Static Grounded Ball & Stem Multifill Seats & Graphite Packing Cleaned for Industrial Gases SIZES 1" 1" 1" 1" 1" 1" 1" 1" 1" 1" 1" 1" 1" 1" 1"
CARBON STEEL ANSI CLASS 300 FULL PORT FLANGED BALL VALVE (1")
NUMBER SIZE 88-205-01 1" A B 1.00 .62 C D 5.00 1.94 E 3.12 F 8.00 G 3.62 H 4 I 4.25 J 2.00 K .50 Wt. 7.4
D-43
88-200 Series
Field repairable Bolted body design Actuator mounting provisions Nitride corrosion protection Meets NACE MR-01-75 with SS trim
Carbon Steel ANSI Class 150 Flanged Full Port Ball Valve
ANSI Class 150 Flanged Ends, 285 psig WOG, Cold Non-Shock. 150 psig Saturated Steam. Vacuum Service to 29 inches Hg. Federal Specification: WW-V-35C, Type: II, Composition: CS, Style: 3.
VARIATIONS AVAILABLE:
88-240 series (SS Ball & Stem)
OPTIONS AVAILABLE:
(SUFFIX) -02-03-04-08-10-14-15-18-19-24-35-60-65-67-69-MGOPTION Static Grounded 1-1/4" Stem Extension 2-1/4" Stem Extension 90 Reversed Stem SS Lever & Nut Vented Ball (see page J-2) Round Handle Plain Yellow Grip Lock Plate Graphite Stem Packing PTFE Trim Static Grounded Ball & Stem Multifill Seats & Graphite Packing Cleaned For Industrial Gases Purge Ports Gear Operator & Hand Wheel SIZES 1-1/2" to 2-1/2" 1-1/2" to 2-1/2" 1-1/2" to 2-1/2" 1-1/2" to 2-1/2" 1-1/2" to 2-1/2" 1-1/2" to 2-1/2" 1-1/2" to 2-1/2" 1-1/2" to 2-1/2" 1-1/2" to 2-1/2" 1-1/2" to 2-1/2" 1-1/2" to 2-1/2" 1-1/2" to 2-1/2" 1-1/2" to 2-1/2" 1-1/2" to 2-1/2" 2" to 2-1/2" 1-1/2" to 2-1/2"
D-44
88-200 Series
FEATURES (3" to 6")
Blow-out-proof stem design Field repairable Actuator mounting provisions Nitride corrosion protection
Carbon Steel ANSI Class 150 Flanged Full Port Ball Valve
ANSI Class 150 Flanged Ends, 285 psig WOG, Cold Non-Shock. 150 psig Saturated Steam. Vacuum Service to 29 inches Hg. Federal Specification: WW-V-35C, Type: II, Composition: CS, Style: 3.
Graphite stem packing Positive shut-off Adjustable packing gland Bolted body design RPTFE seats Corrosion resistant Certified to API standard 607, 4th Edition Meets NACE MR-01-75 with SS trim
VARIATIONS AVAILABLE:
88-240 Series (SS Ball & Stem)
OPTIONS AVAILABLE:
(SUFFIX) -14-19-35-60-65-67-68-69-MGOPTION Vented Ball (see page J-2) Lock Plate PTFE Trim Static Grounded Ball & Stem Multifill Seats & Graphite Packing Cleaned for Industrial Gases 4" Stem Extension Purge Ports Gear Operator & Hand Wheel SIZES 3" to 6" 3" to 6" 3" to 6" 3" to 6" 3" to 6" 3" to 6" 3" to 4" 3" to 6" 3" to 6"
CARBON STEEL ANSI CLASS 150 FULL PORT FLANGED BALL VALVE (3" to 6")
NUMBER SIZE 88-200-01 3" 88-20A-01 4" 88-20C-01 6" A B C D 3.00 .75 8.00 4.00 4.00 .75 9.00 5.25 6.00 .87 15.50 7.75 E F G 6.00 18.00 6.00 7.50 18.00 7.62 9.50 18.00 8.62 H 7.25 8.87 9.87 I 4 8 8 J K L Wt. 5.00 7.50 .75 58.3 6.18 9.00 .93 98.0 8.50 11.00 1.00 212.0
D-45
88-200 Series
Blow-out-proof stem design Field repairable Actuator mounting provisions Nitride corrosion protection
Carbon Steel ANSI Class 150 Flanged Full Port Ball Valve
ANSI Class 150 Flanged Ends, 285 psig WOG, Cold Non-Shock. 150 psig Saturated Steam. Vacuum Service to 29 inches Hg. Federal Specification: WW-V-35C, Type: II, Composition: CS, Style: 3.
VARIATIONS AVAILABLE:
88-240 Series (SS Ball & Stem)
OPTIONS AVAILABLE:
(SUFFIX) -14-35-60-65-67-69OPTION Vented Ball (see page J-2) PTFE Trim Static Grounded Ball & Stem Multifill Seats & Graphite Packing Cleaned for Industrial Gases Purge Ports SIZES 8" to 12" 8" to 12" 8" to 12" 8" to 12" 8" to 12" 8" to 12"
D-46
88-700 Series
FEATURES (2")
Positive shut-off Blow-out-proof stem design Unibody construction Field repairable Corrosion resistant Nitride corrosion protection Certified to API standard 607, 4th Edition
Graphite stem packing Adjustable packing gland RPTFE seats and seals Actuator mounting provisions
VARIATIONS AVAILABLE:
88-740 Series (316 SS Ball & Stem)
OPTIONS AVAILABLE:
(SUFFIX) -03-04-08-14-15-18-19-35-60-65-67-MGOPTION 1-1/4" Stem Extension 2-1/4" Stem Extension 90 Reversed Stem Vented Ball (see page J-2) Round Handle Plain Yellow Grip Lock Plate PTFE Trim Static Grounded Ball & Stem Multifill Seats & Graphite Packing Cleaned for Industrial Gases Gear Operator & Hand Wheel SIZES 2" 2" 2" 2" 2" 2" 2" 2" 2" 2" 2" 2"
D-47
88-700 Series
VARIATIONS AVAILABLE:
88-740 Series (316 SS Ball & Stem)
OPTIONS AVAILABLE:
(SUFFIX) -14-19-35-60-65-67-68-69-MGOPTION Vented Ball (see page J-2) Lock Plate PTFE Trim Static Grounded Ball & Stem Multifill Seats & Graphite Packing Cleaned for Industrial Gases 4" Stem Extension Purge Ports Gear Operator & Hand Wheel SIZES 3" to 10" 3" to 10" 3" to 6" 3" to 10" 3" to 10" 3" to 10" 3" to 4" 3" to 10" 3" to 10"
CARBON STEEL ANSI CLASS 300 FLANGED BALL VALVE (3" to 10")
NUMBER SIZE 88-700-01 3" 88-70A-01 4" 88-70C-01 6" 88-70E-01 8" 88-70G-01 10" A 2.50 3.25 4.50 6.00 7.50 B .87 .87 .87 1.00 1.25 C 11.12 12.00 15.87 16.50 18.00 D E F G 3.00 6.62 18.00 5.50 3.43 7.87 18.00 7.00 6.62 10.62 18.00 7.87 5.75 13.00 18.00 10.25 6.50 15.25 18.00 11.50 H I J K 6.75 8 5.00 8.25 8.25 8 6.18 10.00 9.12 12 8.50 12.50 11.50 12 10.62 15.00 12.75 16 12.75 17.50
D-48
88-900 Series
Field repairable Unibody design Actuator mounting provisions
Carbon Steel ANSI Class 300 Flanged Full Port Ball Valve
ANSI Class 300 Flanged Ends, 740 psig WOG, Cold Non-Shock. 150 psig Saturated Steam. Vacuum Service to 29 inches Hg. Federal Specification: WW-V-35C, Type: II, Composition: CS, Style: 3.
VARIATIONS AVAILABLE:
88-940 Series (SS Ball & Stem)
OPTIONS AVAILABLE:
(SUFFIX) -02-03-04-08-14-15-18-24-27-35-47-48-49-57-60-65-67OPTION Static Grounded 1-1/4" Stem Extension 2-1/4" Stem Extension 90 Reversed Stem Vented Ball (see page J-2) Round Handle Plain Yellow Grip Graphite Stem Packing Latch Lock Lever PTFE Trim SS Oval Latch-Lock Handle SS Oval Handle Assembled Dry Cleaned for Gaseous Oxygen Static Grounded Ball & Stem Multifill Seats & Graphite Packing Cleaned for Industrial Gases SIZES 1/2" to 1-1/2" 1/2" to 1-1/2" 1/2" to 1-1/2" 1/2" to 1-1/2" 1/2" to 1-1/2" 1/2" to 1-1/2" 1/2" to 1-1/2" 1/2" to 1-1/2" 1/2" to 1-1/2" 1/2" to 1-1/2" 1/2" to 1-1/2" 1/2" to 1-1/2" 1/2" to 1-1/2" 1/2" to 1-1/2" 1/2" to 1-1/2" 1/2" to 1-1/2" 1/2" to 1-1/2"
CARBON STEEL ANSI CLASS 300 FULL PORT FLANGED BALL VALVE (1/2" to 1-1/2")
NUMBER SIZE 88-903-01 1/2" 88-904-01 3/4" 88-905-01 1" 88-907-01 1-1/2" A .62 .81 1.00 1.50 B .62 .75 .75 .88 C 5.50 6.00 6.50 7.50 D 1.98 2.35 2.45 3.25 E 2.62 3.25 3.50 4.50 F 4.78 4.78 7.93 8.00 G 2.93 3.10 3.62 4.60 H 4 4 4 4 I 3.75 4.62 4.88 6.12 J 1.37 1.68 2.00 2.87 K .56 .61 .68 .82
D-49
88-900 Series
FEATURES (2")
Positive shut-off Blow-out-proof stem design Bolted body design Field repairable Nitride corrosion protection Actuator mounting provisions Meets NACE MR-01-75 with SS trim
Carbon Steel ANSI Class 300 Flanged Full Port Ball Valve
ANSI Class 300 Flanged Ends, 740 psig WOG, Cold Non-Shock. 150 psig Saturated Steam. Vacuum Service to 29 inches Hg. Federal Specification: WW-V-35C, Type: II, Composition: CS Style: 3
Investment cast body Adjustable packing gland RPTFE seats and seals Certified to API standard 607, 4th Edition, when (-24) ordered
VARIATIONS AVAILABLE:
88-940 Series (SS Ball & Stem)
OPTIONS AVAILABLE:
(SUFFIX) -02-03-04-08-10-14-15-18-19-24-35-60-65-67-69-MGOPTION Static Grounded 1-1/4" Stem Extension 2-1/4" Stem Extension 90 Reversed Stem SS Lever & Nut Vented Ball (see page J-2) Round Handle Plain Yellow Grip Lock Plate Graphite Stem Packing PTFE Trim Static Grounded Ball & Stem Multifill Seats & Graphite Packing Cleaned for Industrial Gases Purge Ports Gear Operator & Hand Wheel SIZES 2" 2" 2" 2" 2" 2" 2" 2" 2" 2" 2" 2" 2" 2" 2" 2"
CARBON STEEL ANSI CLASS 300 FULL PORT FLANGED BALL VALVE (2")
NUMBER SIZE 88-908-01 2" A B 2.00 .75 C D 8.50 3.50 E 5.00 F 8.00 G 5.60 H 8 I 6.50 J 3.62 K Wt. .82 32.0
D-50
88-900 Series
FEATURES (3" to 6")
Positive shut-off Blow-out-proof stem design Bolted body design Field repairable Nitride corrosion protection Actuator mounting provisions Meets NACE MR-01-75 with SS trim 10. Body 11. Body seal 12. Gland plate 13. Screw 14. Stop 15. Handle adapter 16. Body bolt 17. Body nut A216-WCB Graphite 304 SS Steel, grade 8 zinc plated A276-316 A351-CF8M A193-Grade B7 A194-Grade 2H
Carbon Steel ANSI Class 300 Flanged Full Port Ball Valve
ANSI Class 300 Flanged Ends, 740 psig WOG, Cold Non-Shock. 150 psig Saturated Steam. Vacuum Service to 29 inches Hg. Federal Specification: WW-V-35C, Type: II, Composition: CS, Style: 3.
Graphite stem packing Adjustable packing gland RPTFE seats Certified to API standard 607, 4th Edition 1. Handle 2. Stem packing 3. Stem bearing 4. Ball 5. Seat (2) 6. Retainer 7. Packing gland 8. Stem 9. Screw
VARIATIONS AVAILABLE:
88-940 Series (SS Ball & Stem)
OPTIONS AVAILABLE:
(SUFFIX) -14-19-35-60-65-67-68-69-MGOPTION Vented Ball (see page J-2) Lock Plate PTFE Trim Static Grounded Ball & Stem Multifill Seats & Graphite Packing Cleaned for Industrial Gases 4" Stem Extension Purge Ports Gear Operator & Hand Wheel SIZES 3" to 6" 3" to 6" 3" to 6" 3" to 6" 3" to 6" 3" to 6" 3" to 4" 3" to 6" 3" to 6"
D-51
88-900 Series
FEATURES (8")
Positive shut-off Blow-out-proof stem design Bolted body design Field repairable Nitride corrosion protection Actuator mounting provisions Meets NACE MR-01-75 with SS trim
Carbon Steel ANSI Class 300 Flanged Full Port Ball Valve
ANSI Class 300 Flanged Ends, 740 psig WOG, Cold Non-Shock. 150 psig Saturated Steam. Vacuum Service to 29 inches Hg. Federal Specification: WW-V-35C, Type: II, Composition: CS, Style: 3.
Graphite stem packing Adjustable packing gland RPTFE seats Certified to API standard 607, 4th Edition
VARIATIONS AVAILABLE:
88-940 Series (SS Ball & Stem)
OPTIONS AVAILABLE:
(SUFFIX) -14-35-60-65-67-69OPTION Vented Ball (see page J-2) PTFE Trim Static Grounded Ball & Stem Multifill Seats & Graphite Packing Cleaned for Industrial Gases Purge Ports SIZES 8" 8" 8" 8" 8" 8"
CARBON STEEL ANSI CLASS 300 FULL PORT FLANGED BALL VALVE (8")
NUMBER SIZE 88-90E-01 8" A B C D E F G H I J K L Wt. 8.00 1.00 16.50 8.25 13.00 18.00 14.48 11.12 12 10.62 15.00 1.68 485.0
D-52
SS ANSI CLASS 150 FULL PORT FLANGED EXTENDED BONNET BALL VALVE (1/2" to 2")
NUMBER SIZE 452-203-01 1/2" 452-204-01 3/4" 452-205-01 1" 452-207-01 1-1/2" 452-208-01 2" A .62 .81 1.00 1.50 2.00 B .62 .62 .62 .62 .75 C 4.25 4.62 5.00 6.50 7.00 D 2.12 2.31 2.50 3.25 3.50 E 2.37 2.75 3.12 3.87 4.75 F 3.87 3.87 3.87 5.62 5.62 G 7.38 7.48 7.59 8.10 8.51 H 4 4 4 4 4 I 3.50 3.88 4.25 5.00 6.00 J 1.38 1.69 2.00 2.87 3.62 K .43 .50 .50 .68 .68 L 2.23 2.15 2.06 2.00 1.92 Wt. 6.6 9.6 10.1 25.3 36.8
1/00
D-53
D-54
1/00
453-200 Series
Carbon Steel Class 150 Full Port Flanged Extended Bonnet Ball Valve
ANSI Class 150 Flanged Ends, 285 psig WOG, Cold Non-Shock. 150 psig Saturated Steam. Vacuum Service to 29 inches Hg. Federal Specification: WW-V-35C.
1/00
D-55
453-200 Series
FEATURES (3" to 6")
Carbon Steel Class 150 Full Port Flanged Extended Bonnet Ball Valve
ANSI Class 150 Flanged Ends, 285 psig WOG, Cold Non-Shock. 150 psig Saturated Steam. Vacuum Service to 29 inches Hg. Federal Specification: WW-V-35C.
Investment cast components Positive shut-off Blow-out-proof stem design PTFE seats and packing Field repairable Meets NACE MR-01-75 Spring-loaded adjustable packing Corrosion resistant Extended bonnet for insulation Nitride corrosion protection Actuator mounting provisions External connection for negative pressure scrubbing system (or monitoring)
D-56
1/00
87A-400 Full Port Ball Valve Series Alloy 20 ANSI Class 150 Flanged
NE W 20 FO 00 R
STANDARD FEATURES
Two Position Locking Device Antistatic Grounded Stem CHV Style Adjustable Stem Seals Blow-out Proof Stem Design Cast Boss for Bleed / Drain Port Four Point ISO 5211 Mounting Pad Bolt Circle Full Bore Design for Maximum Flow Efficiency Slot Vented Ball for Thermal Expansion Vacuum Service to 29 inches Hg
OPTIONS AVAILABLE:
(SUFFIX) -01-14-15-21-24-35-38-49-57-60-65-69-70OPTION Standard (Locking Kit and Grounded Stem) Side Vented Ball (See Page J-2) Wheel Handle UHMWPE Seats Fire Safe (Graphite Packing and Seal) PTFE Seats and Seals PEEK Seats and Graphite Packing Assembled Dry Oxygen Cleaned Grounded Ball and Stem MPTFE Seats and Graphite Packing Drilled and Tapped Purge Port with Plug 4" Extended Bonnet
MATERIALS OF CONSTRUCTION
Description 1. Body 2. Retainer 3. Ball 4. Stem 5. Packing Gland 6. Stem Seals 7. Seats 8. Gland Screws 9. Gland Plate 10. Stem Nut 11. Lever 12. Stem Bearing 13. Stop 14. Stop Screw 15. Lock Plate 16. Body Seal 17. Lockwasher 18. Grounding Spring Material ASTM A351 CN7M ASTM B473 (UNS N08020) ASTM B473 (UNS N08020) ASTM B473 (UNS N08020) ASTM A276 Type 316 PTFE RPTFE ASTM A193 B8 Class 1 302 or 304 SS 316 SS 302 or 304 SS with Vinyl Grip RPTFE ASTM A276 Type 316 18-8 SS 302 or 304 SS RPTFE 302 or 304 SS SS
1/00
D-57
R O F W 000 NE 2
87A-400 Series Valve Alloy 20 ANSI Class 150 Flanged Standard Port Ball
STANDARD FEATURES
Two Position Locking Device Antistatic Grounded Stem CHV Style Adjustable Stem Seals Blow-out Proof Stem Design Cast Boss for Bleed / Drain Port Four Point ISO 5211 Mounting Pad Bolt Circle Slot Vented Ball for Thermal Expansion Vacuum Service to 29 inches Hg
OPTIONS AVAILABLE:
(SUFFIX) -01-14-15-21-24-35-38-49-57-60-65-69OPTION Standard (Locking Kit and Grounded Stem) Side Vented Ball (See Page J-2) Wheel Handle UHMWPE Seats Fire Safe (Graphite Packing and Seal) PTFE Seats and Seals PEEK Seats and Graphite Packing Assembled Dry Oxygen Cleaned Grounded Ball and Stem MPTFE Seats and Graphite Packing Drilled and Tapped Purge Port with Plug
MATERIALS OF CONSTRUCTION
Description 1. Body 2. Retainer 3. Ball 4. Stem 5. Packing Gland 6. Stem Seals 7. Seats 8. Gland Screws 9. Gland Plate 10. Stem Nut 11. Lever 12. Stem Bearing 13. Stop 14. Stop Screw 15. Lock Plate 16. Body Seal 17. Lockwasher 18. Grounding Spring Material ASTM A351 CN7M ASTM B473 (UNS N08020) ASTM B473 (UNS N08020) ASTM B473 (UNS N08020) ASTM A276 Type 316 PTFE RPTFE ASTM A193 B8 Class 1 302 or 304 SS 316 SS 302 or 304 SS with Vinyl Grip RPTFE ASTM A276 Type 316 18-8 SS 302 or 304 SS RPTFE 302 or 304 SS SS
A 1.00 1.50
B 6.50 7.00
C 3.69 3.69
D 3.62 4.62
E 6.03 6.65
F 0.47 0.72
G 1.62 2.41
H 2.15 3.09
I 1.392 1.949
J 0.696 0.974
K 0.500 0.625
L 0.287 0.412
M 1/4-20 5/16-18
N 1.50 2.00
D-58
1/00
87A-400 Series Valve - 3" Alloy 20 ANSI Class 150 Flanged Standard Port Ball
NE W 20 FO 00 R
STANDARDS COMPLIANCE
ASME B16.5- "Pipe Flanges and Flanged Fittings" ASME B16.10- "Face to Face Dimensions of Valves" ASME B16.34- "Valves - Flanged, Threaded, and Welding End" API 607"Fire Test - Soft Seated Quarter Turn Valves" (-24 option) API 608"Ball Valves - Flanged, Threaded, and Welding End" MSS SP-25"Standard Marking System for Valves" MSS SP-61"Pressure Testing of Steel Valves" MSS SP-72"Ball Valves with Flanged or Buttwelding Ends" ASME B31.1,- Pressure Piping Standards B31.3, & B31.8
STANDARD FEATURES
Two Position Locking Device Antistatic Grounded Stem CHV Style Adjustable Stem Seals Blow-out Proof Stem Design Cast Bosses for Bleed / Drain Ports Four Point ISO 5211 Mounting Pad Bolt Circle Slot Vented Ball for Thermal Expansion Vacuum Service to 29 inches Hg
OPTIONS AVAILABLE:
(SUFFIX) -01-14-21-24-35-38-49-57-60-65-69-70-MG-MH-MJ-MKOPTION Standard (Locking Kit and Grounded Stem) Side Vented Ball (See Page J-2) UHMWPE Seats Fire Safe (Graphite Packing and Seal) PTFE Seats and Seals PEEK Seats and Graphite Packing Assembled Dry Oxygen Cleaned Grounded Ball and Stem MPTFE Seats and Graphite Packing Drilled and Tapped Purge Ports with Plugs 4" Extended Bonnet Gear Operater with Standard Handwheel Gear Operater with Standard Handwheel & Locking Device Gear Operater with Oversize Handwheel Gear Operater with Oversize Handwheel & Locking Device
MATERIALS OF CONSTRUCTION
Description 1. Body 2. Retainer 3. Ball 4. Stem 5. Packing Gland 6. Stem Seals 7. Seats 8. Gland Screws 9. Gland Plate 10. Stem Nut 11. Lever 12. Stem Bearing 13. Stop 14. Stop Screw 15. Lock Plate 16. Body Seal 17. Grounding Spring 18. Body Joint Stud 19. Body Joint Nut 20. Lockwasher Material ASTM A351 CN7M ASTM A351 CN7M ASTM B473 (UNS N08020) or CN7M ASTM B473 (UNS N08020) ASTM A276 Type 316 PTFE RPTFE ASTM A193 B8 Class 1 316 SS 18-8 SS 316 SS with Vinyl Grip RPTFE ASTM A276 Type 316 316 SS 302 or 304 SS RPTFE SS ASTM A193 Grade B8M ASTM A194 Grade 8 302 or 304 SS
NUMBER 87A-400-01
SIZE 3"
A 2.50
B 8.00
C 3.51
D 6.23
E 8.40
F 0.80
G 3.93
H 4.70
I 1.949
J 0.974
K 0.750
L 0.477
M 5/16-18
1/00
D-59
R FO W 00 NE 20
87A-400 Series Valve - 4" Alloy 20 ANSI Class 150 Flanged Standard Port Ball
STANDARDS COMPLIANCE
ASME B16.5- "Pipe Flanges and Flanged Fittings" ASME B16.10- "Face to Face Dimensions of Valves" ASME B16.34- "Valves - Flanged, Threaded, and Welding End" API 607"Fire Test - Soft Seated Quarter Turn Valves" (-24 option) API 608"Ball Valves - Flanged, Threaded, and Welding End" MSS SP-25"Standard Marking System for Valves" MSS SP-61"Pressure Testing of Steel Valves" MSS SP-72"Ball Valves with Flanged or Buttwelding Ends" ASME B31.1,- Pressure Piping Standards B31.3, & B31.8
STANDARD FEATURES
Two Position Locking Device Antistatic Grounded Stem CHV Style Adjustable Stem Seals Blow-out Proof Stem Design Cast Bosses for Bleed / Drain Ports Four Point ISO 5211 Mounting Pad Bolt Circle Slot Vented Ball for Thermal Expansion Vacuum Service to 29 inches Hg
OPTIONS AVAILABLE:
(SUFFIX) -01-14-21-24-35-49-57-60-65-69-70-MG-MH-MJ-MKOPTION Standard (Locking Kit and Grounded Stem) Side Vented Ball (See Page J-2) UHMWPE Seats Fire Safe (Graphite Packing and Seal) PTFE Seats and Seals Assembled Dry Oxygen Cleaned Grounded Ball and Stem MPTFE Seats and Graphite Packing Drilled and Tapped Purge Ports with Plugs 4" Extended Bonnet Gear Operater with Standard Handwheel Gear Operater with Standard Handwheel & Locking Device Gear Operater with Oversize Handwheel Gear Operater with Oversize Handwheel & Locking Device
MATERIALS OF CONSTRUCTION
Description 1. Body 2. Retainer 3. Ball 4. Stem 5. Packing Gland 6. Stem Seals 7. Seats 8. Gland Screws 9. Gland Plate 10. Adapter Screw 11. Handle Adapter 12. Stem Bearing 13. Stop 14. Stop Screw 15. Lock Plate 16. Body Seal 17. Grounding Spring 18. Body Joint Stud 19. Body Joint Nut 20. Adapter Screw 21. Pipe Handle Material ASTM A351 CN7M ASTM A351 CN7M ASTM B473 (UNS N08020) or CN7M ASTM B473 (UNS N08020) ASTM A276 Type 316 PTFE RPTFE ASTM A193 B8 Class 1 316 SS 18-8 SS 316 SS with Vinyl Grip RPTFE ASTM A276 Type 316 316 SS 302 or 304 SS RPTFE SS ASTM A193 Grade B8M ASTM A194 Grade 8 18-8 SS Galvanized Steel (not shown)
A 3.00
B 9.00
C 4.18
D 8.80
E 3.88
F 0.50
G 4.75
H 5.95
I 2.840
J 1.420
K 1.250
L 0.725
M 3/8-16
D-60
1/00
SECTION H CONTENTS
SPECIALTY BALL VALVES
DESCRIPTION
7A-130-26 Series, Threaded Dry Chlorine Carbon Steel with Ni-Cu Ball & Stem 7B-100 Series, Threaded Full Port Bronze 7B-300 Series, Threaded Full Port Bronze 7B-800 Series, M x F Threaded Full Port Bronze 7H-800 Series, M x F Threaded Full Port Stainless Steel 7K-100 Series, Threaded Full Port Bronze with Drain 71-500 Series, Threaded Deadman Spring Return Handle Bronze 74-100 Series, Threaded Chemical Resistant Nickel 75-100 Series, Threaded Bronze Pad Locking Valve 76-500 Series, Threaded Deadman Spring Return Handle Stainless Steel 78-100 Series, Threaded Bronze with Dust Cover and Chain 78-124 &-125, Threaded Bronze 5-Port Fuel Selector 78-200 Series, Solder End Bronze with Dust Cover and Chain 78-200 Series, Threaded Bronze Surface Mount 78-255, Conbraco 4" Threaded Bronze 78-257/267 Series, M x F Threaded Brass and Bronze Instrumentation 78-621/625 Series, Threaded Bronze Irrigation 78-664/666 Series, Threaded Bronze with Center Drain 78-668, 3/4" Solder End Bronze Purge and Drain 89-500 Series, Threaded Deadman Spring Return Handle Carbon Steel 95-100 Series, Threaded Full Port Bronze Stop and Drain 95-200 Series, Solder End Full Port Bronze Stop and Drain 390-100 Series, NPT Full Port AAR Stainless Steel 87-205-B6, 1" Flange x NPT Full Port AAR Stainless Steel 87-208-A6, 2" Flange x NPT Full Port AAR Stainless Steel 87-200-A4, 3" Flange x NPT Full Port AAR Stainless Steel 82-200 Series, Male Brazed Extensions 82-200 Series, Female Brazed Extensions 65-008 Series, 2" x 6" & 3" x 6" Flanged Adaptor (Railcar Service) UL Listed and AGA Ball Valves - continued on next page
PAGE
H-1 H-2 H-3 H-4 H-5 H-6 H-7 H-8 H-9 H-10 H-11 H-12 H-13 H-14 H-15 H-16 H-17 H-18 H-19 H-20 H-21 H-22 H-23 H-24 H-25 H-26 H-27 H-28 H-29
PAGE
H-30 H-31 H-32 H-33 H-34 H-35 H-36 H-37 H-38 H-39
7A-130-26 Series
Carbon Steel Dry Chlorine Ball Valve With Ni-Cu Ball and Stem
Threaded. 400 psig WOG, Cold Non-Shock. For Use With Dry Chlorine Gas and Dry Liquid. Federal Specification: WW-V-35C, Type: II, Composition: CS, Style: 3. Complies With Recommendations of Chlorine Institute Pamphlet No. 6.
FEATURES
Chevron style stem packing Ni-Cu ball and stem Investment Cast Parts Nitride corrosion protection Blow-out-proof stem design Bolted, adjustable packing gland Vented ball
CARBON STEEL DRY CHLORINE BALL VALVE WITH Ni-Cu BALL AND STEM
NUMBER 7A-131-26 7A-132-26 7A-133-26 7A-134-26 7A-135-26 7A-136-26 7A-137-26 7A-138-26 SIZE 1/4" 3/8" 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" A .43 .50 .50 .68 .87 1.00 1.25 1.50 B 1.56 1.56 1.56 2.00 2.37 2.24 2.65 3.25 C 2.75 2.75 2.75 3.50 4.12 4.24 5.13 6.00 D 1.93 1.93 1.93 2.31 2.43 3.00 3.38 3.67 E 3.87 3.87 3.87 4.87 4.87 5.50 8.00 8.00 Wt. 1.25 1.21 1.14 2.11 2.94 4.40 7.04 10.86
1/00
7B-100 Series
FEATURES
Blow-out-proof stem design Adjustable packing gland
OPTIONS AVAILABLE:
(SUFFIX) -31 OPTION Side Outlet Not Drilled & Tapped SIZES 1/4" to 2"
H-2
7B-300 Series
FEATURES
Blow-out-proof stem design Adjustable packing gland
OPTIONS AVAILABLE:
(SUFFIX) -31 OPTION Side Outlet Not Drilled & Tapped SIZES 1/4" to 2"
7B-800 Series
FEATURES
Blow-out-proof stem design Adjustable packing gland
OPTIONS AVAILABLE:
(SUFFIX) -31 OPTION Side Outlet Not Drilled & Tapped SIZES 1/4" to 2"
H-4
7H-800 Series
FEATURES
Blow-out-proof stem design Adjustable packing gland
OPTIONS AVAILABLE:
(SUFFIX) -31 OPTION Side Outlet Not Drilled & Tapped SIZES 1/4" to 1"
NPT Threaded with NPT threaded drain port. Recommended for water or air services. Rated +50F to 200F, 0-125 psig.
FEATURES
Chromium plated ball RPTFE seats and stuffing box ring Mounting pad for easy actuator mounting (3/4" to 2-1/2") Blow-out-proof stem design Adjustable packing gland Full port for full flow & min. pressure drop Auto-drain / Auto-vent
VARIATIONS AVAILABLE:
7K-150 Series (Original Balancing Stop) 7K-190 Series (Pinned Retainer)
OPTIONS AVAILABLE:
(SUFFIX) -02 -03 -04 -07 -08 -10 -15 -16 -17 -18 -24 -27 -30 -32 -35 -40 -45 -46-47 -48-49 -50-56 -57 -58 -60 -61 -63 OPTION Static Grounded 1-1/4" Stem Extension 2-1/4" Stem Extension Tee Handle 90 Reversed Stem SS Lever & Nut Round Handle Vertical Chain Lever Rough Chrome Plating Plain Yellow Grip Graphite Stem Packing Latch Lock Lever CamLock Handle SS Tee Handle & Nut PTFE Trim Cyl-Loc Less Lever & Nut Lock In Closed Position SS Latch-Lock Oval Handle SS Oval Handle Assembled Dry 2-1/4 Locking Stem Extension Multifill Seats Cleaned for Gaseous Oxygen Horizontal Chain Lever Static Grounded Ball & Stem Grounded Ball & Stem & Assembled Dry NPT x Solder Retainer SIZES 1/4" to 2-1/2" 1/4" to 2-1/2" 1/4" to 2-1/2" 1/4" to 1-1/4" 1/4" to 2-1/2" 1/4" to 2-1/2" 1/4" to 1-1/4" 3/4" to 2-1/2" 1/4" to 2-1/2" 1/4" to 2-1/2" 1/4" to 2-1/2" 1/4" to 2-1/2" 1/4" to 1-1/4" 1/4" to 1-1/4" 1/4" to 2-1/2" 1/4" to 1-1/4" 1/4" to 2-1/2" 1/4" to 2-1/2" 1/4" to 3/4" 1/4" to 2" 1/4" to 2-1/2" 1/4" to 2-1/2" 1/4" to 2-1/2" 1/4" to 2-1/2" 3/4" to 2-1/2" 1/4" to 2-1/2" 1/4" to 2-1/2" 1/4" to 2-1/2"
H-6
1/00
71-500 Series
FEATURES
Spring return to close (-01) Blow-out-proof stem design Spring return to open (-08) Adjustable packing gland All components of lever are SS Chromium plated ball Operating torque is approximately three times standard valve torque RPTFE seats and stuffing box ring
VARIATIONS AVAILABLE:
71-540 Series 71-590 Series (316 SS Ball & Stem) (Pinned Retainer)
OPTIONS AVAILABLE:
(SUFFIX) -08 -14 -20 -21 -24 -35 -49 -57 -P01-T01OPTION 90 Reversed Stem (Spring Open) Vented Ball(see page J-2) Slot Vented Ball UHMWPE Seats (Non-PTFE) Graphite Stem Packing PTFE Trim Assembled Dry Cleaned for Gaseous Oxygen BSPP (Parallel) Thread Connection BSPT (Tapered) Thread Connection SIZES 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2"
74-100 Series
FEATURES
Blow-out-proof stem design Adjustable packing gland (-24) Certified to API 607 4th Edition
Investment cast components RPTFE seats and stuffing box ring SS lever and nut
OPTIONS AVAILABLE:
(SUFFIX) -02 -03 -04 -07 -14 -15 -16 -18 -21 -24 -27 -30 -32 -35 -45 -46-48-49 -50-56 -58 -60 -P01-T01OPTION Static Grounded 1-1/4" Stem Extension 2-1/4" Stem Extension Tee Handle Vented Ball(see page J-2) Round Handle Vertical Chain Lever Plain Yellow Grip UHMWPE Seats (Non-PTFE) Graphite Stem Packing Latch Lock Lever CamLock Handle SS Tee Handle & Nut PTFE Trim Less Lever & Nut Latch Lock Lever - Lock Close Only SS Oval Handle Assembled Dry 2-1/4 Locking Stem Extension Multifill Seats Horizontal Chain Lever Static Grounded Ball & Stem BSPP (Parallel) Thread Connection BSPT (Tapered) Thread Connection SIZES 1/2" to 2" 1/2" to 2" 1/2" to 2" 1/2" to 2" 1/2" to 2" 1/2" to 2" 3/4" to 2" 1/2" to 2" 1/2" to 2" 1/2" to 2" 1/2" to 2" 1/2" to 2" 1/2" to 2" 1/2" to 2" 1/2" to 2" 1/2" to 2" 1/2" to 2" 1/2" to 2" 1/2" to 2" 1/2" to 2" 3/4" to 2" 1/2" to 2" 1/2" to 2" 1/2" to 2"
H-8
75-100 Series
FEATURES
Chromium plated ball Blow-out-proof stem design RPTFE seats and stuffing box ring Adjustable packing gland May be padlocked in open or closed position with no change of hardware
VARIATIONS AVAILABLE:
75-140 Series 75-190 Series (316 SS Ball & Stem) (Pinned Retainer)
OPTIONS AVAILABLE:
(SUFFIX) -02 -05 -08 -10 -14 -17 -18 -20 -24 -41 -49 -57 -60 -P01-T01OPTION Static Grounded Plain Ball 90 Reversed Stem SS Lever & Nut Vented Ball(see page J-2) Rough Chrome Plating Plain Yellow Grip Slot Vented Ball Graphite Stem Packing Automatic Drain Assembled Dry Cleaned for Gaseous Oxygen Static Grounded Ball & Stem BSPP (Parallel) Thread Connection BSPT (Tapered) Thread Connection SIZES 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2"
Pat. 3,865,130
76-500 Series
FEATURES
Spring return to close (-01) Spring return to open (-08) RPTFE seats and stuffing box ring All components of lever are stainless steel Operating torque is approximately three times standard valve torque
Blow-out-proof stem design Adjustable packing gland Meets NACE MR-01-75 Investment cast components
OPTIONS AVAILABLE:
(SUFFIX) -08 -14 -21 -24 -35 -49 -57 -60 -P01-T01OPTION 90 Reversed Stem (Spring Open) Vented Ball(see page J-2) UHMWPE Seats (Non-PTFE) Graphite Stem Packing PTFE Trim Assembled Dry Cleaned for Gaseous Oxygen Static Grounded Ball & Stem BSPP (Parallel) Thread Connection BSPT (Tapered) Thread Connection SIZES 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2"
For Pressure/Temperature Ratings, Refer to Page N-15, Graph No. 14 (1/4 to 1) Refer to Page N-14, Graph No. 12 (1-1/4 to 2) 1/00
H-10
78-100 Series
FEATURES
H-11
H-12
78-200 Series
FEATURES
The 78-200 is designed to be soft soldered into lines without disassembly. This allows a tested valve to be installed without disturbing the seats and seals in any way. Soldering temperature not to exceed 500F.
H-13
78-200 Series
FEATURES
Blow-out-proof stem design Adjustable packing gland
78-255-01
4" Bronze Ball Valve
4" Threaded. 150 psig WOG, Cold Non-Shock. 50 psig Saturated Steam.
FEATURES
Chromium plated ball RPTFE stuffing box ring PTFE seats Blow-out-proof stem design Adjustable packing gland
H-15
78-257/267 Series
FEATURES
PTFE seats Compact design
A .21 .31
B .37 .43
C 1.43 1.43
D .87 .87
E 1.25 1.25
A .21 .31
B .37 .43
C 1.43 1.43
D .75 .75
E N/A N/A
A .21 .31
B .80 .80
C 1.60 1.60
D .72 .72
E N/A N/A
NUMBER SIZE A B C D E Cv* Wt. 78-267-01 1/4"M X 1/4"F .25 .65 1.45 .93 1.37 5.5 .20 *The Cv factor is the gallons of water per minute that the valve will pass with a 1 psig pressure drop.
H-16
78-621/625 Series
FEATURES
Blow-out-proof stem design Adjustable packing gland
FEATURES: Automatic Draining in the Off Position SS Underground Curb Stop Handle
Drain Port
Caution: Do not use where drained media could cause damage. See options section (option -41) for description of Auto-Drain feature.
78-664/78-962 Series
Threaded, 600 psig WOG, Cold Non-Shock.
H-18
78-668
Blow-out-proof stem design Adjustable packing gland Furnished with dust cover* and chain
FEATURES
Chromium plated ball RPTFE seats and stuffing box ring Hose thread connection for disposal of drained media
FLOW PATTERN
D H
The 78-668 is designed to be soft soldered into lines without disassembly. This allows a tested valve to be installed without disturbing the seats and seals in any way. Soldering temperature not to exceed 500F.
H-19
89-500 Series
FEATURES
Spring return to close (-01) Blow-out-proof stem design Spring return to open (-08) Adjustable packing gland RPTFE stuffing box ring Investment cast components All components of lever are stainless steel Multifill seats Nitride corrosion protection Operating torque is approximately three times standard valve torque
VARIATIONS AVAILABLE:
89-540 Series (316 SS Ball & Stem)
OPTIONS AVAILABLE:
(SUFFIX) -08 -14 -21 -24 -35 -P01-T01OPTION 90 Reversed Stem (Spring Open) Vented Ball(see page J-2) UHMWPE Seats (Non-PTFE) Graphite Stem Packing PTFE Trim BSPP (Parallel) Thread Connection BSPT (Tapered) Thread Connection SIZES 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2"
For Pressure/Temperature Ratings, Refer to Page N-15, Graph No. 13 (1/4 to 1) Refer to Page N-14, Graph No. 11 (1-1/4 to 2)
H-20
95-100 Series
FEATURES
Blow-out-proof stem design Adjustable packing gland Rugged construction
Chromium plated ball RPTFE seats and stuffing box ring Drain cap designed to prevent loss
VARIATIONS AVAILABLE:
95-120 Series (Adjustable Stop Lever)
OPTIONS AVAILABLE:
(SUFFIX) -07 -08 -10 -14 -15 -18 -20 -27 -32 -45 -46-48 -49 -63 OPTION Tee Handle 90 Reversed Stem SS Lever & Nut Vented Ball(see page J-2) Round Handle Plain Yellow Grip Slot Vented Ball Latch Lock Lever SS Tee Handle & Nut Less Lever & Nut Latch Lock Lever - Lock Close Only SS Oval Handle Assembled Dry Threaded x Solder Retainer SIZES 1/2" to 1" 1/2" to 1" 1/2" to 1" 1/2" to 1" 1/2" to 1" 1/2" to 1" 1/2" to 1" 1/2" to 1" 1/2" to 1" 1/2" to 1" 1/2" to 1" 1/2" to 1" 1/2" to 1" 1/2" to 1"
H-21
95-200 Series
FEATURES
Blow-out-proof stem design Adjustable packing gland Rugged construction
Bronze Solder End Full Port Stop and Drain Ball Valve
Solder End, 400 psig WOG, Cold Non-Shock. Federal Specification: WW-V-35C, Type: II, Composition: BZ, Style: 3.
Chromium plated ball RPTFE seats and stuffing box ring Drain cap designed to prevent loss
VARIATIONS AVAILABLE:
95-220 Series (Adjustable Stop Lever)
OPTIONS AVAILABLE:
(SUFFIX) -07 -08 -10 -14 -15 -18 -20 -24 -27 -32 -45 -46-48 -49 OPTION Tee Handle 90 Reversed Stem SS Lever & Nut Vented Ball(see page J-2) Round Handle Plain Yellow Grip Slot Vented Ball Graphite Stem Packing Latch Lock Lever SS Tee Handle & Nut Less Lever & Nut Latch Lock Lever - Lock Close Only SS Oval Handle Assembled Dry SIZES 1/2" to 1" 1/2" to 1" 1/2" to 1" 1/2" to 1" 1/2" to 1" 1/2" to 1" 1/2" to 1" 1/2" to 1" 1/2" to 1" 1/2" to 1" 1/2" to 1" 1/2" to 1" 1/2" to 1" 1/2" to 1"
The 95-200 is designed to be soft soldered into lines without disassembly. This allows a tested valve to be installed without disturbing the seats and seals in any way. Soldering temperatures not to exceed 500F.
BRONZE SOLDER END STOP AND DRAIN FULL PORT BALL VALVE
NUMBER 95-203-01 95-204-01 95-205-01 SIZE 1/2" 3/4" 1" A .50 .81 1.00 B 1.43 2.12 2.21 C 2.87 4.12 4.43 D 1.75 2.15 2.43 E F 3.87 .628 4.87 .878 4.87 1.128 G .50 .75 .90 Wt. .70 1.23 1.90
H-22
390-100 Series
FEATURES
Meets NACE MR-01-75 Positive shut-off Corrosion resistant RPTFE seats
AAR Approved Investment cast body and retainer Adjustable packing gland Graphite body seal and packing
Blow-out-proof stem design Field repairable Bolted body design Compact design
1" Stainless Steel Full Port Flange x NPT AAR Ball Valve
AAR Approval #E919013
ANSI Class 150 Flange x NPT Threaded Ends, 275 psig WOG, Cold Non-Shock 150 psig Saturated Steam. Vacuum Service to 29 inches Hg. Federal Specification: WW-V-35C, Type: II, Composition: SS, Style: 3.
87-205-B6
FEATURES
AAR Approved Investment cast body and retainer Adjustable packing gland Graphite body seal and packing Meets NACE MR-01-75 Positive shut-off Corrosion resistant RPTFE seats Blow-out-proof stem design Field repairable Bolted body design Compact design
H-24
2" Stainless Steel Full Port Flange x NPT AAR Ball Valve
AAR Approval #E919013
ANSI Class 150 Flange x NPT Threaded Ends, 275 psig WOG, Cold Non-Shock 150 psig Saturated Steam. Vacuum Service to 29 inches Hg. Federal Specification: WW-V-35C, Type: II, Composition: SS, Style: 3.
87-208-A6
FEATURES
AAR Approved Investment cast body and retainer Adjustable packing gland Graphite body seal and packing Meets NACE MR-01-75 Positive shut-off Corrosion resistant RPTFE seats Blow-out-proof stem design Field repairable Bolted body design Reversed operation
H-25
3" Stainless Steel Full Port Flange x NPT AAR Ball Valve
AAR Approval #E9190114
ANSI Class 150 Flange x NPT Threaded Ends, 275 psig WOG, Cold Non-Shock 150 psig Saturated Steam. Vacuum Service to 29 inches Hg. Federal Specification: WW-V-35C, Type: II, Composition: SS, Style: 3.
87-200-A4 Series
FEATURES
AAR Approved Graphite body seal and packing Adjustable packing gland RPTFE seats
Meets NACE MR-01-75 Bolted body design Corrosion resistant Investment cast lever
H-26
1/00
Bronze 3-Piece Full Port Ball Valve With Male Brazed Extensions
Solder End, 600 psig WOG, Cold Non-Shock. 150 psig Saturated Steam. Vacuum Service to 29 inches Hg. Federal Specification: WW-V-35B, Type: II, Composition: BZ, Style: 1. Designed for soft solder or brazed installation without disassembly.
82-200 Series
FEATURES
Blow-out-proof stem design Adjustable packing gland Latch lock handle optional
*NOMINAL TUBING O.D. COPYRIGHT 1997 CONBRACO IND., INC. PRINTED IN U.S.A.
H-27
82-200 Series
Bronze 3-Piece Full Port Ball Valve With 6 Female Brazed Extensions
Solder End, 600 psig WOG, Cold Non-Shock. 150 psig Saturated Steam. Vacuum Service to 29 inches Hg. Federal Specification: WW-V-35B, Type: II, Composition: BZ, Style: 1. Designed for soft solder or brazed installation without disassembly.
FEATURES
Full port configuration RPTFE seats & seals In-line repairable Blow-out-proof stem design Adjustable packing gland Latch lock handle optional
H-28
65-008 Series
AAR Approved #E989075
1/00
H-29
73-300 Series
FEATURES
Heavy duty quarter turn lever RPTFE seats and seals Steel barstock design Easy installation and maintenance
Blow-out-proof stem design Adjustable packing gland Chromium plated ball Nitride corrosion protection
VARIATIONS AVAILABLE:
73-340 Series (316 SS ball & Stem)
H-30
73-400 Series
FEATURES
Heavy duty quarter turn lever RPTFE seats and seals Steel barstock design Easy installation and maintenance
Blow-out-proof stem design Adjustable packing gland Chromium plated ball Nitride corrosion protection
VARIATIONS AVAILABLE:
73-440 Series (316 SS Ball & Stem)
79-700 Series
Blow-out-proof stem design Adjustable packing gland Hermetic welded assembly Full Port Design
UL
LISTED 1. Cap 2. Stem packing 3. Stem bearing 4. Ball 5. Seat (2) 6. Packing gland 7. Stem
UL LISTINGS
Guide SFJQ: Valves, Refrigerant
Equivalent Length of tube 10.8 13.3 10.4 11.2 10.7 11.6 13.2 15.1 21.1 30.1
H-32
1/00
80-100 Series
FEATURES
UL Listed for LP-Gas, natural gas, flammable liquid and heated oil Large ports to reduce pressure drop RPTFE seats and seals Optional tee handle available (-07) Blow-out-proof stem design Quarter turn On-Off
Adjustable packing gland One piece bronze body Chromium plated ball
UL
LISTED
UL LISTINGS
Guide YSDT: LP-Gas shut-off valve. Guide YRPV: Gas shut-off valve for use with natural and manufactured gases. Guide YRBX: Flammable liquid shutoff valve. Guide MHKZ: No. 6 oil at 250F.
OPTIONS AVAILABLE:
(SUFFIX) -27 OPTION Latch Lock Lever SIZES 1/4" to 3"
1/00
H-33
81-100 Series
FEATURES
UL Listed for LP-Gas, natural gas, flammable liquid and heated oil Large ports to reduce pressure drop RPTFE seats and seals Optional tee handle available (-07) Blow-out-proof stem design Quarter turn On-Off Adjustable packing gland One piece bronze body Plain ball
UL
LISTED
UL LISTINGS
Guide YSDT: LP-Gas shut-off valve. Guide YRPV: Gas shut-off valve for use with natural and manufactured gases. Guide YRBX: Flammable liquid shutoff valve. Guide MHKZ: No. 6 oil at 250F.
H-34
Threaded, 300 psig WOG, Cold Non-Shock. 150 psig Saturated Steam. Federal Specification: WW-V-35C, Type: II, Composition: BZ, Style: 3.
FEATURES
UL Listed at 300 psig for fuel, inert gas and flammable liquids Valves with tee handles UL listed RPTFE seats and seals Blow-out-proof stem design Adjustable packing gland One piece bronze body Chromium plated ball Compact
UL LISTINGS
Guide YRPV: Gas shutoff valve for use with natural and manufactured gases. Guide YQNZ: Compressed gas shutoff valve for use with air, inert gases, hydrogen, oxygen and common refrigerants except ammonia. Guide YRBX: Flammable liquid shutoff valve.
OPTIONS AVAILABLE:
(SUFFIX) -05-07 OPTION Plain Ball Tee Handle SIZES 1/2" to 2" 1/2" to 2"
489-100 Series
Blow-out-proof stem design Adjustable packing gland Nitride corrosion protection
NPT Threaded. 1/4" to 1" 2000 psig WOG; 1-1/4" to 2" 1500 psig WOG; 2-1/2" to 3" 1000 psig WOG. Cold Non-Shock. 250 psig LP-Gas. 150 psig Saturated Steam. Vacuum Service to 29 in. Hg. Federal Specification: WW-V-35C. Type: II. Composition: CS. Style: 3.
UL LISTINGS
UL
LISTED
LP-Gas shut-off valve. Gas shut-off valve for use with natural and manufactured gases. Flammable liquid shutoff valve. No. 6 oil at 250F.
VARIATIONS AVAILABLE:
489-140-01 Series with 316 SS Ball and Stem, UL Listed as noted above.
For Pressure/Temperature Ratings, Refer to Page N-15, Graph No. 13 (1/4 to 1) Refer to Page N-14, Graph No. 14 (1-1/4 to 2)
H-36
Bronze Full Port Main Burner Gas Ball Valve (GB-50 Series) FEATURES
Chromium plated ball RPTFE packing PTFE seats Pilot side tap Blow-out-proof stem design Adjustable packing gland Quarter turn On-Off Reversible handle
50-GB0 Series
DESIGN CERTIFICATIONS
UL LISTINGS
UL
LISTED
Guide YRBX: LP-Gas shut-off valve. Guide MHKZ: Gas shut-off valve for use with natural and manufactured gases.
AGA 3-88 ANSI Z21.15 .CGA 9.1 CLIR No. 35 & CR91-002
OPTIONS AVAILABLE:
(SUFFIX) -A1 -A7 -07 -01A-07A-A1A-A7AOPTION 1/4" NPT Side Tap 1/4 NPT Side Tap & Tee Handle 1/8" NPT Side Tap & Tee Handle 1/8" NPT Dual Side Tap 1/8" NPT Dual Side Tap & Tee Handle 1/4" NPT Dual Side Tap 1/4" NPT Dual Side Tap & Tee Handle SIZES 1" to 2" 1" to 2" 1/2" to 2" 3/4" to 2" 3/4" to 2" 1" to 2" 1" to 2"
BRONZE FULL PORT MAIN BURNER GAS BALL VALVE w/1/8" NPT SIDE TAP
NUMBER 50-GB3-01 50-GB4-01 50-GB5-01 SIZE 1/2" 3/4" 1" A .50 .75 1.00 1.25 1.50 2.00 B 1.11 1.26 1.65 1.87 2.50 2.48 C 2.25 2.67 3.42 3.86 4.22 5.02 D 1.68 1.93 2.19 2.37 2.78 3.15 E 2.85 3.85 4.78 4.78 5.50 5.50 F 2.27 2.72 3.19 3.56 4.18 4.90 G 1.00 1.12 1.28 1.62 1.81 2.18 Wt. .64 .80 1.61 2.60 3.85 6.57
1/00
H-37
51-GB0 Series
Blow-out-proof stem design Adjustable packing gland Quarter turn On-Off
DESIGN CERTIFICATIONS
AGA 3-88 ANSI Z21.15 CLIR No. 35 & CR91-002
OPTIONS AVAILABLE:
(SUFFIX) -L1 -T1 OPTION Lever Handle W/Vinyl Tee Handle SIZES 3/8" to 1" 3/8" to 1"
H-38
51-GB0 Series
Blow-out-proof stem design Adjustable packing gland Quarter turn On-Off
DESIGN CERTIFICATIONS
AGA 3-88 ANSI Z21.15 CLIR No. 35 & CR91-002
OPTIONAL LEVER HANDLE 3/8 GB-11 (51GB3L21) 1/2 GB-11 (51BGBL22) 5/8 GB-11 (51GB4L23)
OPTIONAL TEE HANDLE 3/8 GB-11 (51GB3T21) 1/2 GB-11 (51GB3T22) 5/8 GB-11 (51GB4T23)
H-39
Top Entry
TABLE OF CONTENTS
Top Entry Valve Features . . . . . . . . . . . . . . . . . . . . . . . . 2 Special Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 How to Specify Apollo Top Entry Valves . . . . . . . . . . . . 4 Materials Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Flanged Series Top Entry Valves . . . . . . . . . . . . . . . . . . 6 Socket Weld & NPT Series Top Entry Valves . . . . . . . . 6 Buttweld Series Top Entry Valves . . . . . . . . . . . . . . . . . 7 Bonnet Dimensions for Actuator Mounting . . . . . . . . . . 7 Dimensions For Actuator Pad Style Mounting . . . . . . . . 8 Flanged Series Full Port Dimensional Data . . . . . . . . . . . 9 Flanged Series Full Port Actuator Mounting Data . . . . . . 10 Operating Torques . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Extended Bonnet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Fugitive Emissions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Steam Jacketed Valves . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Seat Performance Data . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Steam Charts & Application Guide . . . . . . . . . . . . . . . .15-18 Flow Coefficients . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Standards Compliance
(Most valves within this family of products comply with the requirements of these listed standards.) ASME B16.5 ASME B16.10 ASME B16.34 ASME B31.1 ASME B31.3 ASME B31.8 API 607 MSS SP-25 MSS SP-61 MSS SP-72 No Surprises Apollos Top Entry Ball Valves offer more. In addition to the three things everyone has come to expect from Conbraco: high quality products, competitive pricing and on time delivery, Apollo Top Entry Valves deliver additional premiums; a broader choice of material for both internal and external components, more optional features to choose from, and selectable seal material combinations all resulting in an expanded serviceable application range. Fit for Purpose These premiums can be combined to create a product uniquely tailored to customer specifications and applications. These additional options allow a valve to be selected Pipe Flanges and Flanged Fittings Face to Face Dimensions of Valves (Except Full Port Valves) Valves Flanged, Threaded, and Welding End. Power Piping Chemical Plant and Petroleum Refinery Piping Gas Transmission and Distribution Piping Systems Fire Test Soft Seated Quarter Turn Valves (Depending on Seat and Seal Selection) Standard Marking System for Valves Pressure Testing of Steel Valves Ball Valves with Flanged of Buttweld Ends without compromising critical performance requirements or operating conveniences and without adding unnecessary features and the costs associated with them. The Correct Design The special V seating design introduced the self-adjusting seat to the floating ball valve. This design does not rely on the built-in interference of conventional floating ball valves. It provides automatic compensation for pressure, temperature and wear. As these changes occur, the ball and seats are continuously snugged down into the V resulting in positive leak-tight shutoff when using resilient seats. Maintaining a low pressure seal had been the most difficult condition for floating ball valves, the wedge effect on the ball and seats down the V assures continued low pressure sealing for the life of the seat. All Apollo Top Entry Valves have an anti-static feature designed in. All valve configurations also feature blow-out proof stems as standard. The Right Application Apollos Top Entry Valves provide simplified in-line maintenance in the most natural way. The valve body is allowed to act as a permanent part of the piping system. Potential leak paths are eliminated with the one piece body. Only the bonnet seal and stem seals remain to be counted. And with the variety of bonnet gaskets and stem seal arrangements available through the selection of optional features, even these threats can be minimized.
Ball Valves
Top Entry
00-000-00
SIZE BODY MATERIAL A - Alloy 20 B - CF3M SS (Flanged ) C - Carbon Steel F - Inconel H - Hastelloy C M - M35-1 N - Nickel S - 316 SS T - Titanium END CONFIGURATION AND PRESSURE CLASS B - 150# Flanged C - 300# Flanged D - 300# NPT E - 150# FP Flange F - 300# FP Fange G - 300# NPT x Soc. Weld H - 600# NPT J - 600# Socket Weld K - 600# Flanged L - 300# FP NPT M - 300# FP Soc. Weld N - 300# Socket Weld P - 300# Buttweld Q - 600# NPT x Soc. Weld R - 300# FLG x Buttweld S - 300# RTJ Flanges T - 600# FP Socket Weld U - 600# FP Flange W- 600# Buttweld Y - 300# FP NPT x Socket Weld 3 - 300# FP Buttweld 4 - 600# FP NPT 6 - 600# FP NPT x Socket Weld 7 - 600# FP Buttweld 9 - 900# Flange SEAT (FIGURES ON PAGE 15) 1 - TFE (Figure 1) 2 - RTFE (Figure 1) 3 - RTFE Seat (Figure 2) 4 - Carbon Graphite -750F max. (Figure 1) 5 - 55% Bronze, 5% Moly, (Figure 2) 6 - UHMWPE (Figure 2) 7 - API-607 Certified (TFE Seat, TFE O-ring, Grafoil Seal & Pkgs.) 8 - PEEK (Figure 2) 9 - Ceramic A - API-607 Certified (RTFE Seat, TFE O-ring, Grafoil Seal & Pkgs.) B - 30% Carbon Reinforced PEEK (Figure 2) C - PFA (Figure 2) D - SRTFE, 60% SS, 40% TFE by weight (50% SS Min) (Figure 2) F - CRTFE (Figure 1) G - PCTFE (Figure1) H - High Temp Graphite-1000F max. (Figure 1) K - Stellite Ball & Seats (Figure 4) M - Malcomized 316 SS Ball & Seats (Figure 4) U - UHMWPE (Figure 1) 3 - 1/2" 4 - 3/4" 5 - 1" 7 - 1-1/2" 8 - 2" 0 - 3" A - 4" C - 6" E - 8" G - 10" H - 12"
TRIM MATERIAL A - Alloy 20 B - 316L SS C - Carbon Steel D - Hastelloy C Stem M35-1 Ball E - 410 SS F - Inconel H - Hastelloy C M - M35-1 (Monel) N - Nickel S - 316 SS T - Titanium
OPTIONAL FEATURES
AR - Actuator Ready BO - Grafoil Seals & Packings BN - TFE Spiralwound Bonnet Gasket BS - Grafoil Spiral Wound Bonnet Gasket & Steel CJ - Clamp-On Steam Jacket - Carbon Steel CL - Cam-Lock Handle EB - Extended Bonnet EO - Round Handle FC - Live Loaded Fugitive Emission w/ Double RPTFE Chevron Packings FG - Fugitive Emission Bonnet with EVSP 9000 Graphite Stem Packing Grafoil Packings CH - Clamp-On Steam Jacket - Stainless FL - Fugitive Emission Bonnet with Double RPTFE Stem Packing FO - Full Jacketed w/Oversize Flanges FP - Live Loaded Fugitive Emission w/Double EVSP Packings GO - 2 1/4" Stem Extension HH - Vented Body HO - Vented Body & Cleaned for Chlorine Service HP - Vented Body & Cleaned for Hydrogen Peroxide Service NC - NACE Certified Trim OL - Oval Locking Handle OO - RPTFE Seals & Packings OM - RPTFE Bonnet Gasket & UHMWPE Packings PJ - Partial Steam Jacket PO - Cleaned for Oxygen Service PP - Cleaned for Industrial Gases RS - Welded Ball Stop with Safety Cap TP - Two Position Sliding Latch Lock Lever ZO - PTFE Seals & Packings
MG - Gear Operator MT - 2 Position Lock Plate for Standard Bonnet MU - 2 Position Lock Plate for Extended Bonnet
Optional Features may be used alone or in combination (simply added in alphabetical order), however not all combinations are available on all valves. This is a very limited list of the available options. Contact the factory for specific requirements and availability.
Note:
* MG Is Generic for Gear Operators. Contact Factory or Price Book For Specific Application and Correct Part Number.
Ball Valves
Body ASTM A351-CN7M (Buttweld, Socket weld, and screwed ends) Bonnet ASTM A351-CN7M
ASTM A494-M35-1
A ASTM B473-CB-3
C ASTM A269-316 or ASTM A276-316 or ASTM A312-316 ASTM A313-Type 316 Inconel X-750
H ASTM B574-C276
M ASTM B164-400 or ASTM B165-400 Inconel X-750 Inconel X-750 316 Stainless Steel 18-8 Stainless Steel 304 Stainless Steel w/Vinyl Grip Stainless Steel Wrench Head and Pipe 18-8 Stainless Steel ASTM A193-B8M ASTM A194-Gr.8
S ASTM A269- 316 ASTM A276-316 or ASTM A312-316 ASTM A313-Type 316 Inconel X-750
T ASTM B348-Gr 2
Ti-6AL-4V Ti-6AL-4V
Packing Gland Packing Jam Nut Lever Assembly - (1/2 - 2") Lever Assembly - (3" - 8") Grounding Spring Studs Nuts Capscrews ASTM A193-B8 ASTM A193-B7 ASTM A193-B8
ASTM A193-B8
ASTM A193-B8
ASTM A193-B8
ASTM A193-B8
ASTM A494-CW12MW or ASTM A494-M35-1 or ASTM B574-C276 ASTM B164-K400 ASTM B574-C276 ASTM B164-K400
ASTM A351-CF8M or ASTM B367-Gr C3 or ASTM A479-316 ASTM B348-Gr 4-5 ASTM A276-316* ASTM B348-Gr 4-5
Default Suffix Seat Designation Seat Seat O-ring Stem Packing Bonnet Gasket
ZO1 (All Classes) U UHMWPE Grafoil Grafoil (150-300) Spiral Wound Grafoil (600) BO1 (150-300) BS1 (600)
001 (All Classes) 7 API 607 - PTFE Fire Seat PTFE Grafoil Grafoil
Default Suffix
BO1
BO1
Top Entry
Flanged Valve Dimensions ANSI 150 Class Flanged Top Entry Valves
Size A B C D E 1/2" 0.81 2.85 5.69 3.48 5.15 3/4" 0.81 2.31 4.62 3.54 5.15 1" 0.81 2.50 5.00 3.48 5.15 1-1/2" 1.17 3.25 6.50 4.17 5.94 2" 1.50 3.50 7.00 4.74 7.87 3" 2.25 4.00 8.00 6.41 19.12 4" 3.00 4.50 9.00 7.55 19.50 6"** 4.50 7.75 15.50 10.06 36.00 8"** 6.00 9.00 18.00 14.39 47.00 10"** 7.50 10.50 21.00 15.50 NA * Top 2 holes in each flange are tapped 5/8-11 UNC-2B ** Gear Operator or Actuation Recommended. F 1.70 1.76 1.70 1.96 2.22 2.93 3.32 4.97 6.51 NA G 2.38 2.75 3.12 3.87 4.75 6.00 7.50 9.50 11.75 14.25 H 0.62 0.62 0.62 0.62 0.75 0.75 0.75 0.87 0.87 1.00 J 4 4 4 4 4 4 8* 8 8 12
Socket Weld Valve Dimensions ANSI 300 Class Socket Weld Top Entry Valves
Size 1/2" 3/4" 1" 1-1/2" 2" 3" A 0.81 0.81 0.81 1.17 1.50 2.25 B 2.15 1.96 1.96 2.49 2.86 4.15 C 4.29 3.91 3.91 4.98 5.72 8.29 D 3.48 3.48 3.48 4.17 4.74 6.41 E 5.15 5.15 5.15 5.94 7.87 19.12 F 1.70 1.70 1.70 1.96 2.22 2.93 G 0.38 0.56 0.50 0.55 0.62 1.00
NPT Valve Dimensions ANSI 300 Class NPT Top Entry Valves
Size 1/2" 3/4" 1" 1-1/2" 2" 3" A 0.81 0.81 0.81 1.17 1.50 2.25 B 2.15 1.96 1.96 2.49 2.86 4.15 C 4.29 3.91 3.91 4.98 5.72 8.29 D 3.48 3.48 3.48 4.17 4.74 6.41 E 5.15 5.15 5.15 5.94 7.87 19.12 F 1.70 1.70 1.70 1.96 2.22 2.93
6
Customer Service 1-704-841-6000
Ball Valves
Top Entry
Ball Valves
Flanged Series Top Entry Full Port Ball Valve Dimensional Data
Top Entry
Flanged Series Top Entry Full Port Ball Valves Actuator Mounting Data
10
Ball Valves
There are several elements involved in developing an appropriate in-service valve operating torque. Selection of the basic valve torque constant, shown at the left establishes the nominal valve torque based on the valve size, specified valve seat and the approximate working pressure. Armed with the nominal valve operating torque, adjustments are now made to account for individual service conditions. These factors are selected from the table at the lower left. They are additive, or combined in series and used to arrive at the in-service torque.
Extended Bonnets
Features:
Extended bonnets for Apollo Top Entry Ball Valves are available for sizes 1/2" through 8" in classes 150 and 300. Extended bonnets are standard for all class 600 valves. These bonnets provide excellent performance in high temperature or semi cryogenic applications. This bonnet design places the stem seals further away from the process flow thereby maintaining temperatures closer to ambient. Insulation can be applied to the bonnet reducing the chance of disturbance as would be caused by a stem extension. If and when stem leakage occurs it can be immediately observed and corrective action taken without insulation removal. A valuable feature of the Extended Bonnet is that it is field retrofitable. In addition to being able to order valves with several bonnet styles direct from the factory, kits are available that are pre-assembled with the stem, bonnet, packings, glands and jam nut installed and properly torqued for dependable performance. Contact the factory for kit part numbers for any specific valve or application.
Valve Differential Pressures (psig) Size 100 285 500 740 1/2 thru 1" 115 160 210 260 4 1-1/2" 270 370 480 590 8 2" 475 650 860 1,050 ***9 3" 1,250 1,850 2,400 2,950 4"** 2,700 3,700 4,900 5,900 B 6"** 7,410 10,100 13,400 16,400 8"** 15,000 20,000 26,000 34,500 10"** 25,000 32,000 45,000 60,000 *Reduce torque by 30% for PTFE seats **Gear operator or actuation recommended ***Increase torque by 10% for Ceramic seats ****For full port figures, use one valve size larger
Liquid, Clean Particle Free 0 Liquid, Dirty, Slurry, Raw Water 0.3 to 0.8 Liquid, Black Liquor, Lime Slurry 0.8 Liquid, Oil, Lubricating -0.3 Liquid, Viscous, Molasses 0.3 Gas, Clean & Wet, Saturated Steam0 Gas, Dry, Superheated Steam 0.3 to 0.5 Gas, Dirty, Air Slurry, Natural Gas 0.5 to 1 Oxygen, Chlorine 0.5 0 0.2 0.5 1
Materials of Construction:
Extended bonnets are available in the same broad selection of materials of construction as those illustrated on page 5 for the bonnet, stem, stem packings, packing gland, nuts and body seals.
Frequency of Operation Once per Day or More Once per Day to Once per Week Once per Week to Once per Month Once per Month or Less
Example:
Selected Valve: 3" 150 w/#6 seat (Model: CS-C60-BO1) Torque Constant: 1250 in-lbs Service Factors: ON/OFF Service 0.0 Clean Dry Air 0.3 Weekly Operation 0.2 Net Service Factor 0.5 In Service Valve Torque: 1250 x (1 + 0.5) = 1875 in-lbs This is the valve torque used to select an actuator.
11
Top Entry
Materials of Construction:
Extended bonnets are available in the same materials of construction as those illustrated on page 5 for the bonnet, stem, stem packings, packing gland, nuts and body seals. Class 150 & 300 Valves LIVE LOADED FUGITIVE EMISSIONS BONNET
12
Ball Valves
Partial jacketing (Option PJ) may be used on standard valves. Partial jacketing is applied just to the center section of the valve and does not incorporate the neck area or flanges of the valve. It is generally specified to allow the use of standard flanges and retain conventional flange bolting. Fully jacketed, standard flange valves have modified flanges with blind tapped stud holes in place of the ordinary through holes. Welded full jacketing may be applied to valves with standard flanges (Option FS) or oversize flanges (Option FO). Valves and jacketing can be supplied in a variety of materials. Common materials are stainless valves with stainless jackets, but exotic combinations such as Alloy 20 valves with carbon steel flanges and carbon steel jacketing have been supplied to meet the performance and cost requirements for specific applications. Clamp-on jacketing (Option CJ) offers flexibility not available in the other configurations. Clamp-on jacketing can be applied to valves already in service, or can be removed and reinstalled on a replacement valve or another similar valve in another application. Clamp-on jackets can be supplied as a weldment or in cast aluminum. A heat transfer compound can be applied between the clamp-on jacket and valve to improve its efficiency. Combining these jacketed valves with extended bonnets for safe convenient operation, and adding carbon graphite seats or ceramic balls and seats enables the valve to handle a broad range of viscous materials.
13
Top Entry
U (UHMWPE)
Exhibits the same characteristics as the #6 seat with the exception that it utilizes the inner seat ring to enhance performance in abrasive services. UHMWPE should be used with caution in the presence of solvents, and the operating torque can be expected to be 30% higher than that of the teflon based seat materials. (Figure 1) Reference Chart 4
#2 (RPTFE)
Most commonly specified seat material, and used as the basis for published torque values. Maintains the excellent chemical resistance of unfilled Teflon (PTFE) with increased resistance to wear and abrasion resulting in longer life. (Figure 1) Reference Chart 2
#8 (PEEK)
PEEK (PolyEtherEtherKetone) offers a high strength alternative to RPTFE, resistant to creep and cold flow. This seat offers good abrasion resistance. Higher in cost, this material offers similar chemical resistance to PTFE but should be checked on application. Operating torque tend to be 40% higher than RPTFE. Ball stop recommended. (Figure 2) Reference Chart 5
#4 (Carbon Graphite)
Designed for high temperature applications. A ball stop is required in applications above 500F. Maximum service temperature is limited to 750F in oxidizing applications. This seat like all rigid seat materials does not necessarily provide bubble tight shut-off. Most test standards have allowable leakage rates or list classes of shut-off for this type of seat. Be aware of the system design requirements when specifing this or any rigid seat. Ball stop recommended. (Figure 1) Reference Chart 6
#5 (55%Bronze/5%Moly BRTFE)
Specifically intended for steam applications. Also applicable to abrasive and throttling applications because of the heavy loading of reinforcing materials and the presence of the inner ring. However, chemical compatibility may be a limiting factor in the application of this seat. (Figure 2) Reference Chart 3
#9 (Ceramic)
Working in conjunction with a ceramic ball, this seat outperforms all other materials in throttling and abrasive applications. It possesses excellent chemical resistance. Cost is very high, and unless experience dictates its use, other alternatives should be evaluated first. A ball stop is recommended for all applications. This seat like all rigid seat materials does not necessarily provide bubble tight shut-off. Most test standards have allowable leakage rates or list classes of shut-off for this type of seat. Be aware of the system design requirements when specifing this or any rigid seat. (Figure 4) Reference Chart 7
#6 (UHMWPE)
Ultra High Molecular Weight Polyethylene offers good abrasion resistance making it suitable for use in high solids or slurry applications. These seats are completely confined by a metallic seatholder enhancing their performance in abrasive services. This seat is frequently specified in services where fluorine off-gasing in even the slightest amounts is objectionable. Examples of these services are food, tobacco processing, and nuclear services. (Figure 2) Reference Chart 4
14
Ball Valves
Figure 1 Insert
Figure 2 Insert
Seat Ring
Seat Rings
Figure 3
Insert
Figure 4
Seal
Seatholder
15
Top Entry
Reference Chart
1
150 CS 150 SS 300 CS 300 SS PTFE F/S PTFE
Pressure (psig)
Reference Chart
Temperature (F)
2
150 CS 150 SS 300 CS 300 SS 600 CS 600 SS RPTFE F/S RPTFE
Pressure (psig)
Temperature (F)
16
Ball Valves
Reference Chart
Reference Chart
Pressure (psig)
Temperature (F)
Pressure (psig)
Temperature (F)
Reference Chart
Pressure (psig)
Temperature (F)
Customer Service 1-704-841-6000
17
Top Entry
Reference Chart
Reference Chart
Pressure (psig)
Temperature (F)
Pressure (psig)
Temperature (F)
Reference Chart
Pressure (psig)
Temperature (F)
18
Ball Valves
1/2" 3/4" 1" 1-1/2" 2" 3" 4" 6" 8" 10"
20 30 40 70 120 260
20 30 40 70 120 260
The table above presents the Flow Coefficients (Cv) for Apollo Top Entry Ball Valves. This number represents the flow (in gallons per minute of water) required to produce a 1 psig pressure drop across the valve. The data shown is for a valve in the full open position. Data for various degrees of open are available upon request. The values shown repre-
sent the average for several tests which highlighted the variability of Flow Coefficients. It is not unreasonable to expect a 10% to 20% deviation for a specific valve from the nominal figures shown. Knowing specific system characteristics; such as line size, flow rate, temperature and pressure and knowing specific
fluid characteristics; such as specific gravity, density, or compressibility factor allows the verification of the pressure drop across a known valve. Or conversely, in the absence of a valve size and knowing an acceptable pressure drop under the described flow conditions it is possible to select an appropriately sized valve.
Flow of Liquids
or
Flow of Gases
Where:
Q = Flow in US GPM PD = Pressure Drop (PSI) SG = Specific Gravity at flow conditions CV = Valve Flow Coefficient
Where:
Q = Flow in SCFM PD = Pressure Drop (PSI) P2 = Outlet Pressure PSIA T = Temp.(R) or (F + 460) SG = Specific Gravity at flow conditions CV = Valve Flow Coefficient
19
SECTION J CONTENTS
OPTIONAL CONFIGURATIONS
DESCRIPTION
Options Identification & Description Options Identification & Description Options Identification & Description Options Identification & Description Options Identification & Description Options Identification & Description Options Identification & Description Options Identification & Description
PAGE
J-1 J-2 J-3 J-4 J-5 J-6 J-7 J-8
Options
-02: Static Grounding Device
Used to help prevent static electrical discharge (sparking) between valve components. Accomplished by use of a stainless steel spring washer or coil spring (dependent on valve size). -02 grounds stem, lever & lever nut to valve body.
-03, -04: 1-1/4 (-03) and 2-1/4 (-04) Zinc Plated Carbon Steel Stem Extension Assemblies
Used to elevate the handle to accommodate pipe insulation or to relocate the position of the handle where necessary. Also available with balancing stop. (Example: 70-120-04)
Length of Extension
Available only for the 1-1/4" to 2" 73-100 Series. Consists of 316 SS ball and stem (standard) with special configuration seats to increase working pressure. Three valves only: 73-106-06, 73-107-06 and 73-10806.
J-1
Options
-08: 90 Reversed Stem
Lever grip no longer indicates flow or no flow. (Valve shown in open position).
600 WOG
157 SWP
(Uni-Directional Flow) Vent is on the upstream side. Valve body will be stamped with arrow indicating proper flow direction. Equalizes pressure gain caused by liquid thermal expansion, preventing seat blow-out . Does not reduce the load capability of seats.
Direction of Flow
J-2
Options
-15: Steel Wheel Handle
Prevents accidental operation and balances the turning effect of vibration.
600 WOG
(Bi-Directional Flow) Available on bronze balls. (All other ball materials are already slot-vented).
J-3
Options
-24: Graphite Stem Packing
- Necessary for firesafe design
J-4
Options
-39: SS High-Rise Locking Wheel Handle -40: Cyl-Loc
1/00
J-5
Options
FPO STRIP IN A" HERE
-19
U.S. PATENT #4,498,320 PAD-LOCKING DEVICES FOR 72 & 73 SERIES RECOMMENDED FOR AFTERMARKET
-19
PAD-LOCKING DEVICES FOR 76 & 89 SERIES
-19
PAD-LOCKING DEVICES 86-100-19 SERIES
J-6
Options
TANK BOTTOM FLANGE VALVE 2" SIZE ONLY
-23
-30
-59
J-7
Options
70-100 (Threaded)
75-104-41
WHEN THIS VALVE IS SHUT OFF FOR MAINTENANCE OF A PNEUMATIC TOOL, PRESSURE BETWEEN THE VALVE AND TOOL IS AUTOMATICALLY DRAINED TO ATMOSPHERE TO PREVENT POSSIBLE INJURY CAUSED BY ACCIDENTIAL OPERATION OF THE TOOL. NOTE: Temperature variations and dirty systems can cause vent discharge in both the open and closed positions.
PRESSURE
VALVE CLOSED AND DRAINING. UPSTREAM SEAT STOPS AIR FLOW. DOWNSTREAM SYSTEM IS VENTED TO ATMOSPHERE.
J-8
SECTION N CONTENTS
ENGINEERING DATA
DESCRIPTION Flow Data
70-100, 71-100, 73-100, 74-100, 76-100, 80-100, 81-100 & 89-100 Series 77-100, 82-100, 83-100, 86-100, 83-500 & 86-600 Series 87-100, 88-100, 87-700, 88-700, 87-200 & 88-200 Series 9A-100, 90-100, 91-100, 92-100, 93-100, 96-100, 83-300 & 85-100 Series 70-600, 76-600 & 72 Series Cautionary Statement Torque Constants For Apollo End Entry Valves Apollo Ball Valve Seat Application Guide N-1 N-2 N-3 N-4 N-5 N-6 N-7 N-8
PAGE
FLOW DATA
For Apollo and Saturn Ball Valves
The listed Cv factors are derived from actual flow testing, in the Apollo Ball Valve Division, Conbraco Industries, Inc., Pageland, South Carolina. These tests were completed using standard off the shelf valves with no special preparation and utilizing standard schedule 40 pipe. It should be understood that these factors are for the valve only and also include the connection configuration. The flow testing is done utilizing water as a fluid media and is a direct statement of the gallons of water flowed per minute with a 1 psig pressure differential across the valve/connection unit. Line pressure is not a factor. Because the Cv is a factor, the formula can be used to estimate flow of most media for valve sizing.
Flow of Liquid
Q = Cv P SpGr
Where: Q = flow in US gpm P = pressure drop (psig) SpGr = specific gravity at flowing temperature Cv = valve constant
Flow of Gas
Where: Q = flow in SCFH P = pressure drop (psig) Q = 1360 Cv (P) (P2) SpGr = specific gravity (SpGr) (T) (based on air = 1.0) P2 = outlet pressurepsia or P = 5.4 x 10-7 (SpGr) (T) (Q)2 (psig + 14.7) T = (temp. F + 460) (Cv)2 (P2) Cv = valve constant
Cv FACTORS SERIES: 70-100, 71-100, 73-100, 73A-100, 74-100, 76-100, 80-100 81-100, 89-100 SIZE OPEN DEGREE ROTATION 90 80 70 60 50 40 30 20 10 0 1/4" 8.4 5.3 2.5 1.2 0.6 0.2 0.1 0 0 0 3/8" 7.2 4.6 2.4 1.2 0.6 0.2 0.1 0 0 0 1/2" 15 9.3 5.0 2.9 1.8 1.0 0.4 0.1 0 0 3/4" 30 17 9.0 5.1 2.9 1.5 0.7 0.1 0 0 1" 43 28 16 9.2 5.8 3.1 1.6 0.4 0 0 1-1/4" 48 33 19 12 7.6 4.2 2.1 0.7 0 0 1-1/2" 84 54 31 20 12 6.3 3.2 0.8 0 0 2" 108 75 44 28 17 9.6 4.8 1.3 0 0 2-1/2" 503 310 167 86 55 32 18 7.4 0.5 0 3" 370 225 137 84 54 31 16 6.1 0.1 0
CLOSED
1/00
N-1
SIZE
OPEN DEGREE ROTATION 90 80 70 60 50 40 30 20 10 0
1/4"
8.1 6.9 4.2 2.5 1.4 0.8 0.4 0.1 0 0
3/8"
15 11 6.1 3.4 2.0 1.0 0.4 0.1 0 0
1/2"
15 11 5.4 3.2 1.9 1.0 0.4 0.1 0 0
3/4"
51 31 15 8.3 4.4 2.5 1.1 0.2 0 0
1"
68 44 24 13 7.5 4.0 2.1 0.5 0 0
1-1/4"
125 74 33 20 12 6.3 2.9 0.8 0 0
1-1/2"
177 108 52 30 17 9.3 4.7 1.3 0 0
2"
389 195 92 54 31 16 7.8 2.1 0 0
2-1/2"
503 310 167 86 55 32 18 7.7 0.7 0
CLOSED
Cv FACTORS 82-100, 82-200, 83-100, 86-100, 86-700, 83-500 & 86-600 SERIES
SIZE
OPEN DEGREE ROTATION 90 80 70 60 50 40 30 20 10 0
1/4"
8.1 6.9 4.2 2.6 1.6 1.0 0.4 0.1 0 0
3/8"
14 10 5.8 3.4 1.8 1.0 0.5 0.1 0 0
1/2"
26 19 8.8 4.4 2.3 1.2 0.5 0.1 0 0
3/4"
51 33 15 8.2 4.3 2.3 1.0 0.3 0 0
1"
68 46 24 13 7.5 4.0 2.1 0.5 0 0
1-1/4" 1-1/2"
120 70 33 20 12 6.3 3.2 0.7 0 0 170 99 47 29 17 9.2 4.6 1.3 0 0
2"
376 190 90 53 30 16 7.6 2.0 0 0
2-1/2"
510 308 165 82 53 31 17 6.6 0.7 0
3"
996 486 211 119 69 36 19 7.4 0.7 0
4"
1893 898 388 218 122 71 38 14 1.0 0
CLOSED
N-2
Cv FACTORS 87-100 & 88-100 SERIES 87-700 & 88-700 SERIES 87A-100 & 88A-100 SERIES
SIZE
OPEN DEGREE ROTATION 90 80 70 60 50 40 30 20 10 0
1/2"
15 11 5.7 3.3 1.9 1.1 0.5 0.1 0 0
3/4"
19 14 7.6 4.3 2.4 1.4 0.6 0.1 0 0
1"
47 32 17 9.9 5.7 3.2 1.7 0.5 0 0
1-1/2"
86 57 32 20 12 6.7 3.2 0.9 0 0
2"
104 71 45 29 18 10 5.3 1.8 0 0
2-1/2"
234 157 78 53 32 18 9.5 3.3 0 0
3"
375 231 133 83 52 31 16 6.0 0.3 0
4"
673 418 232 143 84 53 29 11 0.9 0
6"
1099 663 414 277 174 106 56 23 3.0 0
8"
1902 1204 761 483 310 188 104 39 4.6 0
10"(1) (2)
2972 1881 1189 755 484 294 160 61 7.1 0
CLOSED
SIZE
OPEN DEGREE ROTATION 90 80 70 60 50 40 30 20 10 0
1"
75 47 23 13 7.6 4.1 2.1 0.7 0 0
1-1/2"
195 123 53 30 18 10 5.1 1.7 0 0
2"
410 199 90 53 31 16 7.9 2.1 0 0
2-1/2"
545 311 165 84 52 29 16 6.4 0.5 0
3"
1021 488 211 119 69 36 19 7.4 0.6 0
4"
2016 917 390 220 122 71 39 14 1.0 0
6"
4837 2205 908 509 298 170 92 35 4.7 0
8"(1)
5896 2529 1412 875 554 337 192 81 13 0
CLOSED
(1) Data for standard ball. Data for solid ball on request. (2) 10" & 12" valve data was calculated and based on actual available data.
1/00
N-3
SIZE
OPEN DEGREE ROTATION 90 80 70 60 50 40 30 20 10 0
1/4"
8.3 5.9 3.3 1.8 1.1 0.6 0.3 0.1 0 0
3/8"
6.7 4.7 2.8 1.7 1.1 0.6 0.3 0.1 0 0
1/2"
5.7 4.1 2.8 1.8 1.1 0.6 0.3 0.1 0 0
3/4"
10 7.6 4.6 2.8 1.8 1.0 0.5 0.1 0 0
1"
16 11 6.3 4.2 2.4 1.4 0.6 0.1 0 0
1-1/4" 1-1/2"
25 19 12 7.5 4.6 2.6 1.3 0.3 0 0 40 29 19 12 7.5 4.2 2.3 0.7 0 0
2"
62 46 30 19 12 6.8 3.2 1.0 0 0
CLOSED
SIZE
OPEN DEGREE ROTATION 90 80 70 60 50 40 30 20 10 0
1/2"
16 9.9 4.8 2.8 1.7 0.9 0.5 0.1 0 0
3/4"
18 13 7.6 4.6 2.7 1.5 0.7 0.2 0 0
1"
35 23 13 7.3 4.5 2.5 1.1 0.3 0 0
1-1/4" 1-1/2"
48 32 19 12 7.2 3.8 2.1 0.7 0 0 84 53 30 20 12 6.3 3.2 0.8 0 0
2"
104 73 43 27 16 9.4 4.7 1.3 0 0
CLOSED
N-4
1/2"
5.4
3/4"
12
1"
14
2"
47
Cv FACTORS 72 SERIES
SIZE
OPEN DEGREE ROTATION 90 80 70 60 50 40 30 20 10 0
1/2"
26 20 10 5.5 2.8 1.6 0.8 0.2 0 0
3/4"
48 29 15 8.0 4.3 2.4 1.1 0.3 0 0
1"
65 45 24 13 7.5 4.3 2.1 0.7 0 0
1-1/4" 1-1/2"
125 75 34 20 12 6.3 3.2 0.8 0 0 170 104 49 30 17 9.2 4.6 1.3 0 0
2"
216 136 68 41 24 14 6.9 2.1 0 0
CLOSED
N-5
FOLLOWING, ARE SOME SAFEGUARDS THAT MUST BE CONSIDERED PRIOR TO INSTALLATION. EASE OF OPERATION - BALL VALVES ARE EASIER TO OPERATE THAN OTHER TYPES OF SHUT-OFF VALVES. WHEN THESE VALVES ARE INSTALLED SO THAT THERE IS A POSSIBILITY THAT THE HANDLES CAN BE HOOKED OR SNAGGED, APPROPRIATE ACTION TO PREVENT ACCIDENTAL OR UN-WANTED OPENING OR CLOSING OF THE VALVE MUST BE TAKEN. VIBRATIONS IN, THROUGH OR AROUND THE VALVE CAN ALSO CAUSE ACCIDENTAL OR UN-WANTED OPENING OR CLOSING OF THE VALVE. PRESSURE RELIEF - DETERMINE AND PROVIDE CORRECTIVE ACTION AGAINST EXCESSIVE PRESSURE BUILD UP IN THE VALVE OR PIPING SYSTEM DUE TO THERMAL EXPANSION. THERMAL EXPANSION CAN CREATE EXTREME PRESSURES WELL ABOVE THE WORKING PRESSURE LIMIT OF THE VALVE WHICH CAN CAUSE LEAKING OR BURSTING OF THE VALVE. SUPPORTS - IF YOU CHOOSE TO CONNECT A FLEXIBLE HOSE OR OTHER NON-RIDGED CONDUIT TO THE VALVE, THE DESIGN OF SUCH INSTALLATION MUST PREVENT ANY WHIPPING ACTION THAT COULD INJURE OR DAMAGE PERSONNEL OR EQUIPMENT. VALVE MUST BE IMMOBILE. FITTINGS - USE ONLY THOSE FITTINGS OR PIPING THAT ARE COMPATIBLE WITH THE VALVES BEING USED TO PREVENT BREAKAGE AND/OR LEAKAGE. (AS FOR ONE EXAMPLE, IT IS POOR PRACTICE AND NEVER RECOMMENDED TO USE PLASTIC PIPE OR FITTINGS WITH METALLIC VALVES SINCE THERMAL EXPANSION, EXTERNAL FORCES OR OTHER SITUATIONS CAN CAUSE BREAKAGE OR LEAKAGE AT OR NEAR THE JOINT). PRESSURE/TEMPERATURE LIMITS - THE MAXIMUM WORKING PRESSURE LIMIT OF THE VALVE IS MARKED ON THE VALVE BODY. NEVER EXCEED THIS WOG RATING WHICH IS SPECIFIED UP TO 100F. TEMPERATURES HIGHER THAN 100F DECREASE THE MAXIMUM WORKING PRESSURE LIMIT. REFER TO THE APPROPRIATE PRESSURE/TEMPERATURE CHART THAT IS PUBLISHED IN THE CATALOG OR SPECIFICATION SHEET FOR THE PARTICULAR VALVE BEING INSTALLED. FREEZING - PROVIDE MEANS TO PROTECT THE VALVE FROM FREEZING AND BURSTING WHEN USED WITH LIQUIDS. FLUID COMPATIBILITY - CONSIDER THE CORROSIVE, EROSIVE AND ADHESIVE EFFECTS OF FLUIDS ON THE VALVE AND PIPING COMPONENTS. IT IS YOUR RESPONSIBILITY TO ENSURE THAT THE VALVE IS COMPATIBLE WITH THE MATERIAL(S) USED IN THE SYSTEM. INSTALLATION - THE USE OF PTFE PIPE TAPE AS A SEALANT IS RECOMMENDED FOR THREADED VALVES WHEN MAKING JOINTS. CORRECT LUBRICATION OF STAINLESS STEEL PIPE THREADS IS ESPECIALLY IMPORTANT TO PREVENT THREAD GALLING. DO NOT APPLY EXCESSIVE TORQUE WHEN INSTALLING THE VALVE. TO PREVENT DISTORTION OR DAMAGE TO THE VALVE, DO NOT APPLY TORQUE THROUGH THE VALVE. USE PROPER SUPPORTS IN HANDLING PRE-FABRICATED SECTIONS AND IN FINAL INSTALLATION. ALWAYS TEST THE SYSTEM BEFORE USING. MAINTENANCE - DO NOT DISASSEMBLE THE VALVE WHILE UNDER PRESSURE. REQUEST A MAINTENANCE MANUAL BEFORE ATTEMPTING REPAIRS TO THE VALVE. MATERIALS CHEMICAL RESISTANCE CHARTS AVAILABLE ON REQUEST.
N-6
43 123 201 248 309 450 123 201 248 309 450 800 1,148
46 140 229 282 352 513 140 229 282 352 513 912 1,212
48 157 257 317 395 576 157 257 317 395 576 1,024
386 1,038 1,737 3,351 6,000 120 170 200 400 700 1800 3700 10400 26000
651
Note (1) Constants are used to determine the in-service torque requirements of Conbracos valves. Note (2) Constants are based on RPTFE seats and clean dry air at the stated differential pressure. * Torques tested with multifilled seats. ** 71-ARX-64 and 77-ARX-64 rated to 600 psig maximum.
**
*** Rated torque for #1 & #7 PTFE seats can be reduced by 30%.
1/00
N-7
Conbraco Industries
Apollo Ball Valve Seat Application Guide
Designation
-01 (RPTFE)
Range
to 450F
General Description
Glass Reinforced PolyTetraFluoroEthylene Seat Seals and Packings: Most commonly specified seat material. Maintains the chemical resistance of PTFE with increased resistance to wear and abrasion resulting in longer life. Ultra High Molecular Weight Polyethylene Seats with Graphite Seals and Packings: Offers good abrasion resistance making it suitable for use in high solids or slurry applications. This seat is frequently specified in services where fluorine off-gassing in even the slightest amounts is objectionable, services such as food and tobacco processing, and Nuclear services. UHMWPE should be used with caution in the presence of solvents, and the operating torque can be expected to be 30% higher than RPTFE seat materials. PolyTetraFluoroEthylene (PTFE) Seats, Seals and Packings: General application seat material, exhibiting lowest operating torque and excellent resistance to chemical attack. PolyEtherEtherKetone Seats with Graphite Seals and Packings: Offers a high strength alternative to RPTFE, resistant to creep and cold flow. This seat offers good abrasion resistance. This material offers similar chemical resistance to PTFE but should be checked on application. Operating torque tends to be 40% higher than RPTFE. Carbon and Graphite Reinforced PTFE Seats, Seals and Packings: Reduced creep and cold flow like any RPTFE but with 20% lower operating torque than the glass reinforced versions. Carbon and Graphite Reinforced PTFE Seats, Seals and Packings: Reduced creep and cold flow like any RPTFE but with 20% lower operating torque than the glass reinforced versions. Includes handle graphics for 250 psig saturated steam. Carbon and Graphite RPTFE Seats, Graphite Seals and Packings: Reduced creep and cold flow like any RPTFE but with 20% lower operating torque than the glass reinforced versions. This configuration is also good for steam applications.
-21 (UHMWPE)
to 180F
-35 (PTFE)
to 400F
-38 (PEEK)
to 550F
-56 (Multifill)
to 500F
-64 (Multifill)
to 500F
-65 (Multifill)
to 500F
N-8
N-9
N-10
N-11
N-12
N-13
N-14
N-15
N-16
N-17
N-18
N-19
Barstock
A108-1215 G12150 0.09% max. 0.75 - 1.05% 0.04 - 0.09% 0.26 - 0.35% 70,000 psi min. 36,000 psi min.
Casting
A216-WCB J03002 0.30% max. 1.00% max. 0.04% max. 0.045% max 0.60% max. 70,000 psi min. 36,000 psi min.
Forging
A105 K03504 0.35% max. 0.60 - 1.05% 0.04% max. 0.05% max. 0.35% max. 70,000 psi min. 36,000 psi min.
Carbon Steel
Alloy 20
ASTM Specifications Unified Numbering System MAJOR ELEMENTS Chromium Copper Manganese Molybdenum Nickel MECHANICAL PROPERTIES Tensile Strength Yield Strength B473-N08020 N08020 19.00 - 21.00% 3.00 - 4.00% 2.00% max. 2.00 - 3.00% 32.00 - 38.00% 80,000 psi min. 35,000 psi min. A351-CN7M N08007 19.00 - 22.00% 3.00 - 4.00% 1.50% max. 2.33 - 3.00% 27.50 - 30.50% 62,000 psi min. 25,000 psi min. B462-N08020 N08020 19.00 - 21.00% 3.00 - 4.00% 2.00% max. 2.00 - 3.00% 32.00 - 38.00% 80,000 psi min. 35,000 psi min.
N-20
Barstock
Nickel
B160-N02200 N02200 2.00 - 3.00% 99.00% max. 55,000 psi min. 15,000 psi min.
Casting
A494-CZ100 N02100 2.33 - 3.00% 95.00% min. 50,000 psi min. 18,000 psi min.
Forging
B160-N02200 N02200 2.00 - 3.00% 99.00% max. 55,000 psi min. 15,000 psi min.
Nickel-Copper Alloy
ASTM Specifications Unified Numbering System MAJOR ELEMENTS Copper Iron Manganese Molybdenum Nickel MECHANICAL PROPERTIES Tensile Strength Yield Strength B164-N04400 N04400 28.00 - 34.00% 2.50% max. 2.00% max. 2.00 - 3.00% 63.00% min. 70,000 psi min. 25,000 psi min. A494-M35-1 N/A 26.00 - 33.00% 3.50% max. 1.50% max. 2.33 - 3.00% 60.00% min. 65,000 psi min. 25,000 psi min. B564-N04400 N04400 28.00 - 34.00% 2.50% max. 2.00% max. 2.00 - 3.00% 63.00% min. 70,000 psi min. 25,000 psi min.
N-21
Conbraco Industries
Philips Real Time Radiographic System
Our in house, state-of-the-art radiograph system allows for the highest quality and most expedient casting inspection and approval system in the industry.
This system consists of: Philips MG450, 450 KV Constant Potential X-Ray Generation Unit with MCH 451 Tube Head Imaging system utilizing a High Grade Image Intensification Unit coupled to a High Resolution Camera and Monitor Digital Image Processor A 300# Capacity, Precision 5 Axis Motorized Parts Manipulator, Manually Controlled or Programmable Ergonomically Designed Operator Control Console with Video Tape and Thermographic Recording Capabilities Programmable Systems Controller Philips Trained Operations Technicians This system allows you, the Customer, the ability to visually inspect the valves that are being manufactured in our Investment Casting facility, as they are in the manufacturing process. This service allows for the fastest delivery of project work and constant reassurance that the valves that are being supplied will meet or exceed your stringent specifications. Inspection can be done with actual X-RAY film, or with a REAL TIME X-RAY Video Tape of the Valves, which can be viewed on a VHS player at your facility.
N-22
N-23
N-24