You are on page 1of 2

International workshop on natural and low-cost materials in wind...

http://riwen-staged/Nyhedsarkiv/Nyheder/2008/Uge_49/49_ons...

//riwen.
Wednesday, December 3, 2008

This text is printed from Riwen Thursday, December 4, 2008

International workshop on natural and low-cost materials in wind energy technologies for developing countries
On 10 12 November, Ris DTU and Kathmandu Power and Energy Group brought together experts from all over the world in Nepal to discuss materials for wind turbines in poor and isolated rural areas. The workshop concluded that it is possible to use locally available wood for the blades instead of the more expensive composite materials which are normally used. Access to energy is an important prerequisite for development as well as for reducing poverty in developing countries. The energy should preferably come from sustainable energy sources which do not involve a large grid. Wind turbines are a good solution to this challenge, not least because of high potential for utilising local resources for the blades such as wood. The development of reliable wind turbines productible in developing countries was the main subject of the three-day workshop organised by Ris DTU and Kathmandu Power and Energy Group. The workshop was sponsored by Danida funds from the Ministry of Foreign Affairs of Denmark. Read more about the project The workshop was part of the Danish-Nepalese cooperation project "Development of wind energy technologies in Nepal on the basis of natural materials". The NGO Practical Action Nepal is also a partner in this project. The project is led by Senior Scientist Leon Mishnaevsky from Ris DTU's Materials Research Division. He was also in charge of the workshop.

Leon Mishnaevsky together with students from the Kathmandu University. International lecturers, local students Approx 70 lecturers, guests and students from all over the world participated in the workshop. Many students from Nepalese universities had applied for participation, and the organisers chose the best qualified by asking them to write an essay about their interest in wind energy and about perspectives for this energy source in Nepal. The students who had written good essays were invited to attend the workshop. Some of them, who could not afford the registration fee or necessary stay

1 of 2

04-12-2008 13:38

International workshop on natural and low-cost materials in wind...

http://riwen-staged/Nyhedsarkiv/Nyheder/2008/Uge_49/49_ons...

expenses received financial support from the organizing committee. Lecturers from USA, Germany, Denmark, United Kingdom, Australia, Sri Lanka, India and Kenya as well as Nepalese specialists and engineers gave their presentations on various aspects concerning this subject; including choice of material, prediction of strength and reliability and examples of projects in developing countries where small wind turbines have made a difference. Materials will now have to be tested and selected The Danida funded project on wind energy in Nepal started in 2007, and will continue 2 years from now. "In our further work we will carry out comprehensive studies of different sorts of Nepali timbers, using the advanced computational modelling and mechanical testing. This will allow us to develop recommendations for the optimal choice of timber to be used in locally-produced wind turbines. With these recommendations, our Nepali partners will produce reliable, low cost wind turbines and test them in rural areas of Nepal says Project Leader Leon Mishnaevsky We hope that the project will lead to more wind turbines in the small communities and start a positive development. Access to electricity allows people to prolong their working hours per day, which should lead to the improvement of their living conditions, to provide more educational possibilities for adults and children, improve hygienic and health conditions". Marianne Ryde , 4024

2 of 2

04-12-2008 13:38

You might also like