Professional Documents
Culture Documents
RATE LIST For Calibration Services and Certified Reference Materials (CRMs)
Sl. No.
ITEM
PRESSURE
1 Dead Weight Tester a) 2 to 600 kg/cm 2 i/ Single Range ii/ Dual Range b) > 600 to 1200 kg/cm 2 i/ Single Range ii/ Dual Range 2 Pressure Gauge a) Analogue i/ Upto 600 kg/cm 2 ii/ > 600 to 1200 kg/cm2 b) Digital/ Transducer etc. i/ Upto 600 kg/cm 2 ii/ > 600 to 1200 kg/cm 2 10 -15
8,000.00 12,000.00
CALIBRATION SERVICES
(NABL ACCREDITED INDEPENDENT CALIBRATION LABORATORIES)
2,000.00 2,500.00
4,000.00 6,000.00
DIMENSION
1 Test Sieve a) 45 micron to 850 micron b) 1 mm to 4 mm c) 4.75 mm & above 2,000.00 2,000.00 2,000.00 7-10
( 4 )
Sl. No.
ITEM
Sl. No.
ITEM
2,000.00
5-7
8,000.00
10
10 -15 4 R.H Sensor / Indicator (30% to 95% RH) 5* RH Chamber a) 35 to 90% RH 3,500.00 3,500.00 6,000.00 5,000.00 Site Site Site 3,500.00 10
Vernier Caliper (upto 300 mm) a) LC 0.01 mm b) LC 0.02 mm 2,000.00 2,000.00 2,500.00 2,000.00 2,000.00 5-7 5-7 5-7 5-7 6* 7* 8*
b) 10 to 50 C Muffle Furnace (200 to1200 C) Hot Air Oven (Ambient to 300 C) Temperature Controller/Indicator fitted in any Thermal Equipment a) 10 to 200 C b) 200 to1000 C
5 6 7
Glass Scale (upto 200 mm) Micrometer (upto 100 mm) Measuring Tape/Scale/Height Gauge
3,500.00 4,500.00
Site
THERMAL RPM
1 Thermometer (Glass/Digital with Probe/RTD/PRT) ( 10 0 C to 6000 C) 2 Thermocouple /Radiation Pyrometer with Indicator (100 C to 1200 C)
( 5 )
0 0
3,500.00
4,500.00
10
2*
3,000.00
7/Site
Sl. No.
ITEM
Sl. No.
ITEM
MASS / VOLUME
1* Weighing Balance a) b) c) d) 2 1 mg to 200 g >200 g to 5 kg >5 kg to 150 kg Above 150 kg (Out of NABL scope) 4,000.00 4,000.00 6,000.00 7,000.00 Site 1
Weights a) Weight Box b) Weights of various Measures (upto 100 kg) Pipette, Burette, Flask, Cylinder, etc. (5 -1000 cm 3 ) a) Single Mark b) Graduated
FORCE
1* Compression Testing Machine/UTM (Calibration for each load scale in compression mode) a) Upto 2000 kN b) >2000 to 3000 kN 2 Load Indicator of Force Applying Machines (Except CTM/UTM) a) Upto 2000 kN b) >2000 to 3000 kN c) Above 3000 kN
( 7 )
7-10
( 8 )
(ii)
(iii)
(iv)
(v)
(vi)
(vii)
(viii) Calibrated equipment can be collected by clients after 4 P.M. on working days. (ix) Certificate of calibration will be handed over/dispatched upon receipt of payment. No advance/provisional copy of certificate will be issued. Duplicate certificate, if desired, will be issued on payment of Rs. 500.00 plus Service Tax @ 10.3% Depending on the facilities available, equipment other than those in the rate list are also takenup for calibration. Charges for such work shall be quoted separately. ( 9 ) ( 10 )
(x)
CRM No.
Materials
CRM No.
Materials
1001A
2000
100
1007
Gypsum
CO2, SiO2(+ Acid insoluble), Fe2O3, Al2O3, CaO, MgO, SO3, Na2O, K2O, Cl, Combined water and purity
4000
300
1001W
3500
LOI, SiO2, Fe2O3, Al2O3, CaO, MgO, Mn2O3, TiO2, P2O5, Na2O and K2O
4000
300
1001C
2000
100
Raw meal
LOI, SiO2, Fe2O3, Al2O3, CaO, MgO, Mn2O3, TiO2, P2O5, Na2O and K2O
4000
300
1001 FC
Fly ash
1010 1002A Portland Pozzolana Cement Blaines fineness & Specific gravity 1011 2000 100
CaO, MgO, SiO2, IR, specific gravity and Residue on 212 m Sieve LOI, SiO2, Fe2O3, Al2O3, CaO, MgO, Mn2O3, TiO2, P2O5, Na2O, and K2O
1500
100
1002B
2000
100
4500
350
1002 C
2000
100
1012
LOI, SiO2, Fe2O3, Al2O3, CaO, MgO, Mn2O3, TiO2, P2O5, SO3, IR, Na2O, K2O and Cl
4500
350
1002 D
2000
100
( 11 )
( 12 )
CRM No.
Materials
1015
Clinker
LOI, SiO2, Fe2O3, Al2O3, CaO, MgO, Mn2O3, TiO2, P2O5, SO3, Na2O, K2O and Cl
4500
350
1016
LOI, SiO2, Fe2O3, Al2O3, CaO, MgO, Mn2O3, TiO2, P2O5, SO3, Na2O, K2O, Cl and IR
4500
350
(ii)
1017
LOI, SiO2, Fe2O3, Al2O3, CaO, MgO, Mn2O3, TiO2, P2O5, SO3, Na2O, K2O, Cl and Sulphide Sulphur
4500
350
(iii)
(iv)
1023
Fly ash
4500
350
1024 A, B &C
2000
100
(v) 1025 High Alumina Cement LOI, SiO2, Fe2O3, Al2O3, CaO, MgO, SO3, Na2O, K2O, TiO2, P2O5, Mn2O3 and Cl (vi) 1030 Blast Furnace Slag GOI, SiO2, Fe2O3, Al2O3, CaO, MgO, SO3, IR,Na2O, K2O, TiO2, Mn2O3 and sulphide sulphur 4500 350 5500 400
(vii) In case of export requirement, the packing and courier charges will be extra (as per actuals).
( 13 )
( 14 )
d.
Queries may be addressed to: Head of Centre, Centre for Quality Management, Standards and Calibration Services, National Council for Cement and Building Materials, 34 KM Stone, Delhi-Mathura Road (NH 2), Ballabgarh 121004 (Haryana), INDIA.
( 15 )
( 16 )