Professional Documents
Culture Documents
April 2005
DIN EN 10217-1
ICS 23.040.10; 77.140.75
{
Supersedes August 2002 edition.
Geschweite Stahlrohre fr Druckbeanspruchungen Technische Lieferbedingungen Teil 1: Rohre aus unlegierten Sthlen mit festgelegten Eigenschaften bei Raumtemperatur (enthlt nderung A1:2005)
National foreword
This standard has been prepared by ECISS/TC 29 Steel tubes and fittings for steel tubes (Secretariat: Italy). The responsible German body involved in its preparation was the Normenausschuss Eisen und Stahl (Steel and Iron Standards Committee), Technical Committee Rohre aus allgemeinen Bausthlen oder Feinkornbausthlen. DIN V 17006-100 is the standard corresponding to CEN Technical Report CR 10260 referred to in clause 2 of the EN. Amendments This standard differs from the August 2002 edition in that more detailed specifications regarding inspection have been given and Annex ZA has been revised. Previous editions DIN 1626: 1952x-12, 1984-10; DIN 1626-1: 1965-01; DIN 1626-3: 1965-01; DIN 1626-4: 1965-01; DIN 1628: 1984-10; DIN EN 10217-1: 2002-08.
Copyright Deutsches Institut Fur Normung E.V. has the exclusive right of sale Provided by IHS under license with DIN No reproduction or networking permitted without license from IHS
--`,,``,`-`-`,,`,,`,`,,`---
National Annex NA
Standard referred to
(and not included in Normative references and Bibliography) DIN V 17006-100 Designation systems for steel Additional symbols for steel names
No part of this standard may be reproduced without the prior permission of DIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany, for German Standards (DIN-Normen).
Not for Resale
06.05
9637698
Copyright Deutsches Institut Fur Normung E.V. Provided by IHS under license with DIN No reproduction or networking permitted without license from IHS
--`,,``,`-`-`,,`,,`,`,,`---
English version
This European Standard was approved by CEN on 2002-04-25 and Amendment A1 on 2004-12-09. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Management Centre or to any CEN member. The European Standards exist in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland, and the United Kingdom.
European Committee for Standardization Comit Europen de Normalisation Europisches Komitee fr Normung Management Centre: 36, rue de Stassart, B-1050 Brussels
2005. CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national members.
--`,,``,`-`-`,,`,,`,`,,`---
Copyright Deutsches Institut Fur Normung E.V. Provided by IHS under license with DIN No reproduction or networking permitted without license from IHS
Contents
Page
Foreword to EN 10217-1:2002 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Foreword to EN 10217-1:2002/A1:2005 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 1 Scope . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 2 Normative references . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 3 Terms and definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 4 Symbols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 5 Classification and designation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 5.1 Classification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 5.2 Designation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 6 Information to be supplied by the purchaser . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 6.1 Mandatory information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 6.2 Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 6.3 Example of an order . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 7 Manufacturing process . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 7.1 Steelmaking process . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 7.2 Deoxidation process . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 7.3 Tube manufacture and delivery conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 8 Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 8.1 General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 8.2 Chemical composition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 8.3 Mechanical properties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 8.4 Appearance and internal soundness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 8.5 Straightness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 8.6 Preparation of ends . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 8.7 Dimensions, masses and tolerances . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 9 Inspection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 9.1 Types of inspection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 9.2 Inspection documents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 9.3 Summary of inspection and testing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 10 Sampling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 10.1 Frequency of tests . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 10.2 Preparation of samples and test pieces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 11 Test methods . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 11.1 Chemical analysis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 11.2 Tensile test on base material . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 11.3 Transverse tensile test on the weld . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 11.4 Flattening test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 11.5 Drift expanding test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 11.6 Weld bend test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 11.7 Impact test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 11.8 Leak-tightness test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 11.9 Dimensional inspection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 11.10 Visual examination . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 11.11 Non-destructive testing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 11.12 Retest, sorting and reprocessing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 12 Marking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 12.1 Marking to be applied . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 12.2 Additional marking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 13 Protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 Annex A (normative) Qualification of welding procedure for SAW tube production . . . . . . . . . . . . . . 30 Annex ZA (informative) Relationship between this European Standard and the Essential Requirements of 97/23/EC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 Bibliography . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Copyright Deutsches Institut Fur Normung E.V. Provided by IHS under license with DIN No reproduction or networking permitted without license from IHS
--`,,``,`-`-`,,`,,`,`,,`---
Foreword to EN 10217-1:2002
This European Standard has been prepared by Technical Committee ECISS/TC 29 Steel tubes and fittings for steel tubes, the Secretariat of which is held by UNI. This European Standard has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of the relevant EU Directive. For relationship with this directive, see Annex ZA. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, and conflicting national standards withdrawn, by November 2002 at the latest. Other parts of EN 10217 are: Part 2: Electric welded non-alloy and alloy steel tubes with specified elevated temperature properties Part 3: Alloy fine grain steel tubes Part 4: Electric welded non-alloy steel tubes with specified low temperature properties Part 5: Submerged arc welded non-alloy and alloy steel tubes with specified elevated temperature properties Part 6: Submerged arc welded non-alloy steel tubes with specified low temperature properties Part 7: Stainless steel tubes Another European Standard series covering tubes for pressure purposes is: EN 10216 Seamless steel tubes for pressure purposes. In accordance with the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, the Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Malta, the Netherlands, Norway, Portugal, Spain, Sweden, Switzerland, and the United Kingdom.
This amendment to EN 10217-1:2002 has been prepared by Technical Committee ECISS/TC 29 Steel tubes and fittings for steel tubes, the Secretariat of which is held by UNI. This European Standard has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of the relevant EU Directive. For relationship with this directive, see Annex ZA. This amendment shall be given the status of a national standard, either by publication of an identical text or by endorsement, and conflicting national standards withdrawn, by July 2005 at the latest. In accordance with the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland, and the United Kingdom.
Copyright Deutsches Institut Fur Normung E.V. Provided by IHS under license with DIN No reproduction or networking permitted without license from IHS
--`,,``,`-`-`,,`,,`,`,,`---
Foreword to EN 10217-1:2002/A1:2005
Scope
Normative references
--`,,``,`-`-`,,`,,`,`,,`---
Copyright Deutsches Institut Fur Normung E.V. Provided by IHS under license with DIN No reproduction or networking permitted without license from IHS
Copyright Deutsches Institut Fur Normung E.V. Provided by IHS under license with DIN No reproduction or networking permitted without license from IHS
--`,,``,`-`-`,,`,,`,`,,`---
Symbols
--`,,``,`-`-`,,`,,`,`,,`---
Copyright Deutsches Institut Fur Normung E.V. Provided by IHS under license with DIN No reproduction or networking permitted without license from IHS
Manufacturing process
--`,,``,`-`-`,,`,,`,`,,`---
Copyright Deutsches Institut Fur Normung E.V. Provided by IHS under license with DIN No reproduction or networking permitted without license from IHS
Copyright Deutsches Institut Fur Normung E.V. Provided by IHS under license with DIN No reproduction or networking permitted without license from IHS
--`,,``,`-`-`,,`,,`,`,,`---
Copyright Deutsches Institut Fur Normung E.V. Provided by IHS under license with DIN No reproduction or networking permitted without license from IHS
--`,,``,`-`-`,,`,,`,`,,`---
Copyright Deutsches Institut Fur Normung E.V. Provided by IHS under license with DIN No reproduction or networking permitted without license from IHS
--`,,``,`-`-`,,`,,`,`,,`---
--`,,``,`-`-`,,`,,`,`,,`---
Copyright Deutsches Institut Fur Normung E.V. Provided by IHS under license with DIN No reproduction or networking permitted without license from IHS
Copyright Deutsches Institut Fur Normung E.V. Provided by IHS under license with DIN No reproduction or networking permitted without license from IHS
--`,,``,`-`-`,,`,,`,`,,`---
Copyright Deutsches Institut Fur Normung E.V. Provided by IHS under license with DIN No reproduction or networking permitted without license from IHS
--`,,``,`-`-`,,`,,`,`,,`---
--`,,``,`-`-`,,`,,`,`,,`---
Copyright Deutsches Institut Fur Normung E.V. Provided by IHS under license with DIN No reproduction or networking permitted without license from IHS
Dimensions in mm
--`,,``,`-`-`,,`,,`,`,,`---
Copyright Deutsches Institut Fur Normung E.V. Provided by IHS under license with DIN No reproduction or networking permitted without license from IHS
Copyright Deutsches Institut Fur Normung E.V. Provided by IHS under license with DIN No reproduction or networking permitted without license from IHS
--`,,``,`-`-`,,`,,`,`,,`---
Dimension in mm
Dimensions in mm
Copyright Deutsches Institut Fur Normung E.V. Provided by IHS under license with DIN No reproduction or networking permitted without license from IHS
--`,,``,`-`-`,,`,,`,`,,`---
Dimensions in mm
Dimensions in mm
Dimensions in mm
--`,,``,`-`-`,,`,,`,`,,`---
Copyright Deutsches Institut Fur Normung E.V. Provided by IHS under license with DIN No reproduction or networking permitted without license from IHS
Copyright Deutsches Institut Fur Normung E.V. Provided by IHS under license with DIN No reproduction or networking permitted without license from IHS
--`,,``,`-`-`,,`,,`,`,,`---
Copyright Deutsches Institut Fur Normung E.V. Provided by IHS under license with DIN No reproduction or networking permitted without license from IHS
--`,,``,`-`-`,,`,,`,`,,`---
Copyright Deutsches Institut Fur Normung E.V. Provided by IHS under license with DIN No reproduction or networking permitted without license from IHS
--`,,``,`-`-`,,`,,`,`,,`---
10
Sampling
Copyright Deutsches Institut Fur Normung E.V. Provided by IHS under license with DIN No reproduction or networking permitted without license from IHS
--`,,``,`-`-`,,`,,`,`,,`---
Copyright Deutsches Institut Fur Normung E.V. Provided by IHS under license with DIN No reproduction or networking permitted without license from IHS
--`,,``,`-`-`,,`,,`,`,,`---
Copyright Deutsches Institut Fur Normung E.V. Provided by IHS under license with DIN No reproduction or networking permitted without license from IHS
--`,,``,`-`-`,,`,,`,`,,`---
11
Test methods
Copyright Deutsches Institut Fur Normung E.V. Provided by IHS under license with DIN No reproduction or networking permitted without license from IHS
--`,,``,`-`-`,,`,,`,`,,`---
Copyright Deutsches Institut Fur Normung E.V. Provided by IHS under license with DIN No reproduction or networking permitted without license from IHS
--`,,``,`-`-`,,`,,`,`,,`---
--`,,``,`-`-`,,`,,`,`,,`---
Copyright Deutsches Institut Fur Normung E.V. Provided by IHS under license with DIN No reproduction or networking permitted without license from IHS
12
Copyright Deutsches Institut Fur Normung E.V. Provided by IHS under license with DIN No reproduction or networking permitted without license from IHS
--`,,``,`-`-`,,`,,`,`,,`---
Marking
13
Protection
--`,,``,`-`-`,,`,,`,`,,`---
Copyright Deutsches Institut Fur Normung E.V. Provided by IHS under license with DIN No reproduction or networking permitted without license from IHS
Copyright Deutsches Institut Fur Normung E.V. Provided by IHS under license with DIN No reproduction or networking permitted without license from IHS
--`,,``,`-`-`,,`,,`,`,,`---
Copyright Deutsches Institut Fur Normung E.V. Provided by IHS under license with DIN No reproduction or networking permitted without license from IHS
--`,,``,`-`-`,,`,,`,`,,`---
--`,,``,`-`-`,,`,,`,`,,`---
Copyright Deutsches Institut Fur Normung E.V. Provided by IHS under license with DIN No reproduction or networking permitted without license from IHS
--`,,``,`-`-`,,`,,`,`,,`---
Copyright Deutsches Institut Fur Normung E.V. Provided by IHS under license with DIN No reproduction or networking permitted without license from IHS
--`,,``,`-`-`,,`,,`,`,,`---
Copyright Deutsches Institut Fur Normung E.V. Provided by IHS under license with DIN No reproduction or networking permitted without license from IHS
Copyright Deutsches Institut Fur Normung E.V. Provided by IHS under license with DIN No reproduction or networking permitted without license from IHS
--`,,``,`-`-`,,`,,`,`,,`---
--`,,``,`-`-`,,`,,`,`,,`---
Copyright Deutsches Institut Fur Normung E.V. Provided by IHS under license with DIN No reproduction or networking permitted without license from IHS
Dimensions in mm
Copyright Deutsches Institut Fur Normung E.V. Provided by IHS under license with DIN No reproduction or networking permitted without license from IHS
--`,,``,`-`-`,,`,,`,`,,`---
--`,,``,`-`-`,,`,,`,`,,`---
Copyright Deutsches Institut Fur Normung E.V. Provided by IHS under license with DIN No reproduction or networking permitted without license from IHS