Professional Documents
Culture Documents
Date:
9/17/2012
PROJECT INFORMATION
Name: Number: Client: Location:
DESIGN CODE:
INPUT UNITS:
English
OUTPUT UNITS:
English
CONCRETE PARAMETERS
Compressive Strength (psi) Unit Weight (pcf) 4000 150
ANCHOR PARAMETERS
Yield Strength (ksi) Tensile Strength (ksi) 81 105
REBAR PARAMETERS
Longitudinal Bar Size Tie Bar Size 8 3
Member Shape Member Height (Thickness) (in.) Member Width (in.) Member Length (in.) Tension Edge Distance C1 (in.) Tension Edge Distance C3 (in.) Tension Edge Distance C2 (in.) Tension Edge Distance C4 (in.)
ANCHOR INFORMATION
Steel ID Description Designation Diameter (in.) 1 2 3 4 1-1/8 in. Headed Bolt 1-1/8 in. Headed Bolt 1-1/8 in. Headed Bolt 1-1/8 in. Headed Bolt A325 A325 A325 A325 1.125 1.125 1.125 1.125 Coordinates X (in.) -10. 10. -10. 10. Z (in.) 10. 10. -10. -10. Embedment Depth (in.) 30. 30. 30. 30.
Page 1 of 11
Date:
9/17/2012
Page 2 of 11
Date:
9/17/2012
ANCHOR OPTIONS
Ductility in Tension: Ductility in Shear: Reinforcement to resist Tension: Reinforcement to resist Shear: Built-up Grout Pad used: Seismic Risk: Interaction Ratio: User-provided Tensile Group Area: User-provided Shear Group Area: Anchors rigidly connected to attachment: Consider shear break out: Bolt Bearing Area: User-provided Steel Element Load Factor:
FALSE FALSE FALSE FALSE FALSE NONE 1.20 0.00 0.00 FALSE FALSE 1.47 1.00
Page 3 of 11
Date:
9/17/2012
APPLIED LOADS
Load Case Axial (kip) 1 - Dead 2 - Live 3 - Wind 4 - Earthquake 25. 0. 5. 0. Shear X (kip) 10. 0. 5. 0. Moment Z (kip-ft) 50. 0. 5. 0. Shear Z (kip) 10. 0. 5. 0. Moment X (kip-ft) 50. 0. 5. 0.
Page 4 of 11
Date:
9/17/2012
EQUATIONS
(D-3)
(D-13) / (D-14)
(D-15) / (D.5.4.1)
STRENGTH IN SHEAR Steel Strength Vs = (Ase*fut) or (0.6*Ase*fut) or (0.6*Ase*fut + 0.4*Asl*futsl)= Concrete Breakout Strength C1 C2 Vb = Concrete Pryout Strength Vcp = (Kcp*Nb) 37.391 (D-28) Governing effective edge distance = Perpendicular edge distance = 7*(l/do)^0.2 *sqr(do) *sqr(fc') *( C1 ^1.5) 28 8 105.453 (D.6.2.4) (D.6.2.4) (D-21) / (D-22) 48.069 (D-17) / (D-18) / (D-19)
Page 5 of 11
Date:
9/17/2012
Page 6 of 11
Date:
9/17/2012
EQUATIONS
(D-3)
(D.5.3.6) (D-12)
(D-16)
STRENGTH IN SHEAR Steel Strength Vs = (n*Ase*fut) or (n*0.6*Ase*fut)= Concrete Breakout Strength Y5 Y6 Y7 Av = Projected group shear concrete failure area Avo = Vcbg = Concrete Pryout Strength Vcp = (Kcp*Ncbg) 186.956 (D-28) 4.5 * ( C1 ^2) (Av/Avo)*Vb Y5 Y6 Y7 0.7 + 0.3*(Ca2/1.5Ca1) 1 0.757 1.4 1512 3528 47.906 (D-25) (D-26) / (D-27) (D.6.2.7) (D.6.2.1) (D-22) (D-21) 192.276 (D-17) / (D-18) / (D-19)
Page 7 of 11
Date:
9/17/2012
Page 8 of 11
Date:
9/17/2012
for governing load combination 1 for governing load combination 1 Axial Load (kip) Group Tensile Capacity (kip) -48.7 -48.7 -48.7 -48.7 -48.7 -48.7 0.683 0.585 0.643 0.496 0.585 0.439 Tensile Ratio Remarks
1 - 1.4Dead 2 - 1.2Dead + 1.6Live 3 - 1.2Dead + Live + 1.6Wind 4 - 0.9Dead + 1.6Wind 5 - 1.2Dead + Live + Earthquake 6 - 0.9Dead + Earthquake
0. 0. 0. 0. 0. 0.
0. 0. 0. 0. 0. 0.
1. 1. 1. 1. 1. 1.
SHEAR STRENGTH
Strength Reduction Factor Seismic Risk Factor
0.65 1
Page 9 of 11
Date:
9/17/2012
1 - 1.4Dead 2 - 1.2Dead + 1.6Live 3 - 1.2Dead + Live + 1.6Wind 4 - 0.9Dead + 1.6Wind 5 - 1.2Dead + Live + Earthquake 6 - 0.9Dead + Earthquake
Note: Group tensile capacity and group shear capacity are obtained by multiplying the governing tensile capacity and shear capacity by the appropriate strength reduction factors and/or seismic risk factor.
Page 10 of 11
Date:
9/17/2012
Page 11 of 11