Professional Documents
Culture Documents
7 8 9
10
11 12
13
In a steel bar subjected to a three dimensional stress system the elongation measured in the three principal directions over a length of 100cm were found to be 1.8mm, 1.2mm and 0.6mm respectively along the x, y and z axes. Calculate the volumetric strain and the new volume of the material The state of stress at a point related to a xyz coordinate system given by 2 -1 3 ij = -1 4 2 3 2 3 Determine the normal and shear stresses on the planes corresponding to all the six faces of a rectangular parallelepiped with sides 3, 4, 4 units in the x, y and z directions. Also represent the planes corresponding to the direction cosines ( 4/5, 0, 3/5), (0, 4/5, 3/5) and (4/5, 3/5, 0). A rectangular plate 3 cm x 4cm is acted upon by a stress distribution which results in uniform strain x = 0.0035, y =0.005, z =0, xy = 0.001875 and yz = zx = 0, Determine the change in the length of the diagonals
14
15