Professional Documents
Culture Documents
Version 5 Release 14
Page 1
Overview What's New? Getting Started Open the Part to Machine Create a Multi-Axis Sweeping Operation Replay the Toolpath Create a Multi-Axis Contour Driven Operation Create a Multi-Axis Curve Machining Operation Generate NC Code User Tasks Multi-Axis Milling Operations Multi-Axis Sweeping: Lead and Tilt Multi-Axis Sweeping: Fixed Multi-Axis Sweeping: Thru a Point Multi-Axis Sweeping: Normal to Line Multi-Axis Sweeping: 4-Axis Lead/Lag Multi-Axis Sweeping: Optimized Lead Multi-Axis Contour Driven: Between Contours Multi-axis Contour Driven: Parallel Contours Multi-Axis Contour Driven: Spine Contour Multi-Axis Curve Machining: Contact Multi-Axis Curve Machining: Between 2 curves with Tool Axis Interpolation Multi-Axis Curve Machining: Between 2 curves with Tangent Axis Guidance Multi-Axis Curve Machining: Between curve and part Multi-Axis Isoparametric Machining: Lead and Tilt Multi-Axis Isoparametric Machining: 4-Axis Lead/Lag Multi-Axis Isoparametric Machining: Interpolation Auxiliary Operations Part Operations, Manufacturing Programs and Machining Processes NC Manufacturing Entities Verification, Simulation and Program Output Workbench Description Menu Bar Toolbars Specification Tree Customizing General Resources Operation
Version 5 Release 14
Page 2
Output Program Photo/Video Reference Information Multi-Axis Sweeping Multi-Axis Isoparametric Machining Multi-Axis Contour Driven Multi-Axis Curve Machining Collision Checking Methodology Glossary Index
Version 5 Release 14
Page 3
Overview
Welcome to the Multi-Axis Surface Machining User's Guide! This guide is intended for users who need to become quickly familiar with the product. This overview provides the following information:
q
Multi-Axis Surface Machining in a Nutshell Before Reading this Guide Getting the Most Out of this Guide Accessing Sample Documents Conventions Used in this Guide
Multiple surface machining with various tool path styles Capability to machine the entire surface with full collision avoidance of the tool holder and cutter active part Multiple curve machining with various tool path styles for programming quickly and efficiently grooving, engraving, swarf cutting, flank machining for any desired area Various tool axis strategies including dynamic tool axis orientation for both multiple surface and multiple curve machining Complete toolkit for controlled and collision free transition tool paths provided for both multiple surface and multiple curve machining.
Version 5 Release 14
Page 4
Version 5 Release 14
Page 5
What's New?
Enhanced Functionalities
Multi-Axis Sweeping, Multi-Axis Isoparametric Machining, Multi-Axis Contour Driven: Air cuts due to collisions with check can be optimized using the Covering mode. Multi-Axis Curve Machining: Sequencing by level is now available. You can now activate/deactivate collision checking with guiding elements. Discontinuous Guides are supported. Maximum cut depth is available in Between 2 curves mode to replace an auxiliary curve. Unwanted tool axis variation can be avoided by applying a fanning distance. Multi-Axis Isoparametric Machining The Interpolation Tool axis mode accepts additional tool axes.
Version 5 Release 14
Page 6
Getting Started
Before getting into the detailed instructions for using Multi-Axis Machining, this tutorial is intended to give you a feel of what you can accomplish with the product. It provides the following step-by-step scenario that shows you how to use some of the key functionalities. Open the Part to Machine Create a Multi-Axis Sweeping Operation Replay the Toolpath Create a Multi-Axis Contour Driven Operation Create a Multi-Axis Curve Machining Operation Generate NC Code
Version 5 Release 14
Page 7
2. Select Machining > Surface Machining from the Start menu. The Surface Machining workbench appears. The part is displayed in the Set Up Editor window along with the manufacturing specification tree.
3. Double click Part Operation.1 in the tree. The Part Operation dialog box appears.
Version 5 Release 14
Page 8
Select the 5-axis Machine icon then click OK to return to the Part Operation dialog box. 5. Click OK to accept the Part Operation.
Version 5 Release 14
Page 9
6. Select Manufacturing Program.1 in the tree to make it the current entity. To insert program entities such as machining operations, tools and auxiliary commands you can either: q make the program current before clicking the insert program entity command
q
click the insert program entity command then make the program current.
Version 5 Release 14
Page 10
A Multi-Axis Sweeping.1 entity along with a default tool is added to the program.
Version 5 Release 14
Page 11
The Multi-Axis Sweeping dialog box appears directly at the Geometry tab page
2. Right click the red Part Body area in the icon and choose the Select faces contextual command. The Face Selection toolbar appears.
3. Select two faces of the part as shown. Click OK in the toolbar to end face selection.
Version 5 Release 14
Page 12
Version 5 Release 14
Page 13
Click the View Direction arrow (V) and set the view direction in the dialog box as shown.
Click the Start Direction arrow (S) to make sure the direction is (1,0,0). 5. Click OK to create the operation.
Version 5 Release 14
Page 14
1. Select the Multi-Axis Sweeping operation in the tree then select the Tool Path Replay icon . The Replay dialog box appears.
2. Choose the Continuous replay mode by means of the drop down icon
3. Click the
4. Click the
button to start the replay. The tool moves along the computed trajectory.
Version 5 Release 14
Page 15
Version 5 Release 14
Page 16
This task shows you how to create a Multi-Axis Contour Driven operation to machine part of the workpiece. You will specify the geometry to be machined, set some of the machining parameters and select a new tool. Make sure that the Multi-Axis Sweeping operation is the current entity in the program.
. The Multi-Axis Contour Driven dialog box appears directly at the Geometry page
2. Right click the red Part area in the icon and choose the Select faces contextual command. The Face Selection toolbar appears. Select the face to be machined and click OK in the toolbar.
and set the parameters as shown. This operation will use a Between Contours strategy and the
tool axis will be guided in Fixed Lead and Tilt mode. The other parameters are the same as the previous operation. However, in the Radial tab page you can set the Stepover strategy to Distance on Part.
4. Click the View Direction arrow (V) and set the view direction to (0, -1, 0) in the dialog box.
Version 5 Release 14
Page 17
5. Click the red Guide 1 curve in the icon then select the first guide curve in the model. Click the red Guide 2 curve in the icon then
Enter a name of the new tool (for example, Ball Mill D 20). Select the Ball-end tool checkbox. Double click the D (nominal diameter) parameter in the icon, then enter 20mm in the Edit Parameter dialog box. Set the db (body diameter) parameter to 24mm in the same way.
Version 5 Release 14
Page 18
7. Click Tool Path Replay in the dialog box to visually check the operation's tool path.
Click OK to exit the replay mode and return to the Multi-Axis Contour Driven dialog box.
Version 5 Release 14
Page 19
1. Select the Multi-Axis Curve Machining icon appears directly at the Geometry page .
2. Set the curve machining mode to Between 2 Curves and in the sensitive icon set the curve machining type to Side.
3. Select the red top guiding curve in the sensitive icon then select the desired guiding curve in the part.
Version 5 Release 14
Page 20
then enter a value of -5mm in the Edit Parameter dialog box. 6. Select the Strategy tab page and set the Tool Axis direction to (0, -1, 0).
Version 5 Release 14
Page 21
7. Click one of the red tool axes in the sensitive icon, then specify the orientation of the interpolation axis at the start of machining. You can do this by selecting a surface. In this case the surface normal is used. Click the other red tool axis in the sensitive icon, then specify the orientation of the interpolation axis at the end of machining.
Version 5 Release 14
Page 22
Click OK to exit the replay mode and return to the Multi-Axis Curve Machining dialog box.
Version 5 Release 14
Page 23
Version 5 Release 14
Page 24
Generate NC Code
This task shows you how to generate the NC code from the program. Before doing this task, double click the Part Operation entity in the tree and, in the dialog box that appears, click the Machine icon to access the Machine Editor dialog box. Make sure that you have selected a 5-axis machine and that the desired NC data format is set to Axis (X, Y, Z, I, J, K).
1. Use the right mouse key on the Manufacturing Program.1 entity in the tree to select Generate NC Code Interactively. The Generate NC Output Interactively dialog box appears.
Version 5 Release 14
Page 25
Version 5 Release 14
Page 26
2. Select APT as the desired NC data type. 3. Click the Output File [...] button to select the folder where you want the file to be saved and specify the name of the file. 4. Click Execute to generate the APT file.
An extract from a typical APT source file is given below. $$ ----------------------------------------------------------------$$ Generated on Friday, January 19, 2001 03:49:48 PM $$ ----------------------------------------------------------------$$ Manufacturing Program.1 $$ Part Operation.1 $$*CATIA0 $$ Manufacturing Program.1 $$ 1.00000 0.00000 0.00000 0.00000 $$ 0.00000 1.00000 0.00000 0.00000 $$ 0.00000 0.00000 1.00000 0.00000 PARTNO PART TO BE MACHINED COOLNT/ON CUTCOM/OFF PPRINT OPERATION NAME : Tool Change.1 $$ Start generation of : Tool Change.1 MULTAX $$ TOOLCHANGEBEGINNING RAPID GOTO / 0.00000, 0.00000, 100.00000, 0.000000, 0.000000, 1.000000 CUTTER/ 10.000000, 2.000000, 3.000000, 2.000000, 0.000000$ , 0.000000, 100.000000 TOOLNO/1, 10.000000 TPRINT/T1 End Mill D 10 LOADTL/1 $$ End of generation of : Tool Change.1 PPRINT OPERATION NAME : Multi-Axis Sweeping.1 $$ Start generation of : Multi-Axis Sweeping.1 FEDRAT/ 1000.0000,MMPM SPINDL/ 70.0000,RPM,CLW GOTO / -401.86111, -831.36410, 233.69785,-0.224699,-0.974162, 0.022760 GOTO / -365.04139, -841.83161, 233.65336,-0.240252,-0.967467, 0.079289 etc etc SPINDL/OFF REWIND/0 END
Version 5 Release 14
Page 27
User Tasks
The user tasks you will perform with Multi-Axis Surface Machining involve creating, editing and managing machining operations and other Machining entities. Multi-Axis Milling Operations Auxiliary Operations Part Operations, Manufacturing Programs and Machining Processes NC Manufacturing Entities Verification, Simulation and Program Output
Version 5 Release 14
Page 28
Specify the tool to be used. Set the Tool axis mode then specify machining parameters, feeds and speeds, and NC macros as needed.
Basic tasks illustrate the following Tool axis modes for this operation:
q
Lead and Tilt Fixed Thru a Point Normal to Line 4-Axis Lead/Lag Optimized Lead.
Create a Multi-Axis Contour Driven machining operation: q Select the Multi-Axis Contour Driven icon then select the geometry to be machined. You can use Offset Groups and Features when defining geometry.
q
Specify the tool to be used. Set the Guiding strategy and choose one of the following Tool axis modes: r Lead and Tilt
r
Basic tasks illustrate the following Guiding strategies for this operation:
q
Between contours
Version 5 Release 14
Page 29
Create a Multi-Axis Curve Machining operation: q Select the Multi-Axis Curve Machining icon then select the geometry to be machined.
q
Specify the tool to be used. Set the Machining mode and choose one of the following Tool axis modes: r Lead and Tilt
r
Fixed Interpolation Thru a Point Normal to Line Optimized Lead (for Contact machining only) Tangent Axis (for Between 2 curves and Between curve and part modes only) 4-Axis Lead/Lag.
Basic tasks illustrate the following Machining modes for this operation:
q
Contact Between 2 curves with Interpolation tool axis guidance and Tip machining Between 2 curves with Tangent Axis guidance and Side machining Between a curve and part with Tip or Side machining.
Create a Multi-Axis Isoparametric Machining operation: q Select the Isoparametric Machining icon then select the geometry to be machined.
q
Specify the tool to be used. Set the Machining mode and choose one of the following Tool axis modes: r Lead and Tilt
r
Fixed Interpolation Thru a Point Normal to Line Optimized Lead 4-Axis Lead/Lag 4-Axis Tilt.
Version 5 Release 14
Page 30
Basic tasks illustrate the following Tool Axis modes for this operation:
q
Version 5 Release 14
Page 31
Create a Multi-Axis Sweeping Operation with "Lead and Tilt" Tool Axis Guidance
This task illustrates how to create a Multi-Axis Sweeping operation in the program. To create the operation you must define:
q
the geometry to be machined the tool that will be used the parameters of the machining strategy the feedrates and spindle speeds the macros (transition paths) . with the tool axis guided in Lead and Tilt mode
More information can be found in Selecting Geometry. Open the MultiAxisMilling01.CATPart document, then select Machining > Surface Machining from the Start menu. Make the Manufacturing Program current in the specification tree. 1. Select the Multi-Axis Sweeping icon .
A Multi-Axis Sweeping entity along with a default tool is added to the program. The Multi-Axis Sweeping dialog box appears directly at the Geometry tab page This tab page includes a sensitive icon to help you specify the geometry to be machined. .
Version 5 Release 14
Page 32
The part surface of the icon is colored red indicating that this geometry is required. All other geometry is optional. 2. Select the Select faces item in the contextual menu of Part in the icon then select the desired face in the 3D window. The part surface of the icon is now colored green indicating that this geometry is now defined.
3. Click the orange check surface in the icon then select the desired check element in the 3D window. 4. Double click Offset on Check in the icon. Set this value to 5mm in the Edit Parameter dialog box and click OK.
Version 5 Release 14
Page 33
Radial
Version 5 Release 14
Page 34
Tool axis.
6. Click the View Direction arrow (V) and set this direction to (0, -1, 0) Click the Start Direction arrow (S) and set this direction to (1, 0,0) in the dialog box that appears.
Version 5 Release 14
Page 35
The View and Start directions define the guiding plane for the operation. 7. Click Preview in the dialog box to verify the parameters that you have specified. A message box appears giving feedback about this verification. A tool is proposed by default when you want to create a machining operation. If the proposed tool is not suitable, just select the Tool tab page Tool of an Operation. 8. Select the Feeds and Speeds tab page operation. 9. Select the Macros tab page to specify the operation's transition paths (approach and to specify the feedrates and spindle speeds for the to specify the tool you want to use. Please refer to Edit the
retract motion, for example). See Define Macros of an Operation for an example of specifying transition paths on a multi-axis machining operation.
Version 5 Release 14
Page 36
Before accepting the operation, you should check its validity by replaying the tool path.
Version 5 Release 14
Page 37
Create a Multi-Axis Sweeping Operation with "Fixed Axis" Tool Axis Guidance
This task shows how to insert a Multi-Axis Sweeping operation in the program. To create the operation you must define: the geometry to be machined the tool that will be used the parameters of the machining strategy the feedrates and spindle speeds the macros (transition paths) . with the tool axis guided in Fixed Axis mode.
More information can be found in Selecting Geometry. Open the MultiAxisMilling01.CATPart document, then select Machining > Surface Machining from the Start menu. Make the Manufacturing Program current in the specification tree. 1. Select the Multi-Axis Sweeping icon .
A Multi-Axis Sweeping entity along with a default tool is added to the program. The Multi-Axis Sweeping dialog box appears directly at the Geometry tab page This tab page includes a sensitive icon to help you specify the geometry to be machined. .
Version 5 Release 14
Page 38
The part surface of the icon is colored red indicating that this geometry is required. All other geometry is optional. 2. Select the Select faces item in the contextual menu of Part in the icon then select the desired face in the 3D window.
Version 5 Release 14
Page 39
Radial
Version 5 Release 14
Page 40
4. Click the Tool Axis arrow (A) and select the part surface. The surface normal is used as the tool axis.
Click the View Direction arrow (V) and select the part surface. The surface normal is used as the view direction. Click the Start Direction arrow (S) and set this direction to (0,0,1) in the dialog box that appears.
Version 5 Release 14
Page 41
A tool is proposed by default when you want to create a machining operation. If the proposed tool is not suitable, just select the Tool tab page to specify the tool you want to use.
This is described in Edit the Tool of an Operation. 5. Select the Feeds and Speeds tab page operation. 6. Select the Macros tab page retract motion, for example). See Define Macros of an Operation for an example of specifying transition paths on a multi-axis machining operation. Before accepting the operation, you should check its validity by replaying the tool path. 7. Click OK to create the operation. to specify the operation's transition paths (approach and to specify the feedrates and spindle speeds for the
Version 5 Release 14
Page 42
Create a Multi-Axis Sweeping Operation with "Thru a Point" Tool Axis Guidance
This task shows how to insert a Multi-Axis Sweeping operation in the program. To create the operation you must define: the geometry to be machined the tool that will be used the parameters of the machining strategy the feedrates and spindle speeds the macros (transition paths) . with the tool axis guided in Thru a Point mode
More information can be found in Selecting Geometry. Open the MultiAxisMilling01.CATPart document, then select Machining > Surface Machining from the Start menu. Make the Manufacturing Program current in the specification tree. 1. Select the Multi-Axis Sweeping icon .
A Multi-Axis Sweeping entity along with a default tool is added to the program. The Multi-Axis Sweeping dialog box appears directly at the Geometry tab page This tab page includes a sensitive icon to help you specify the geometry to be machined. .
Version 5 Release 14
Page 43
The part surface of the icon is colored red indicating that this geometry is required. All other geometry is optional. 2. Select the Select faces item in the contextual menu of Part in the icon then select the desired face in the 3D window.
Version 5 Release 14
Page 44
Radial
Version 5 Release 14
Page 45
4. Select the red Point symbol in the icon then select the desired Axis point
Version 5 Release 14
Page 46
5. Click the View Direction arrow (V) and select the part surface. The surface normal is used as the view direction. Click the Start Direction arrow (S) and set this direction to (0,0,1) in the dialog box that appears.
A tool is proposed by default when you want to create a machining operation. If the proposed tool is not suitable, just select the Tool tab page to specify the tool you want to use.
This is described in Edit the Tool of an Operation. 6. Select the Feeds and Speeds tab page operation. to specify the feedrates and spindle speeds for the
See Define Macros of an Operation for an example of specifying transition paths on a multi-axis machining operation.
Version 5 Release 14
Page 47
Before accepting the operation, you should check its validity by replaying the tool path.
Version 5 Release 14
Page 48
Create a Multi-Axis Sweeping Operation with "Normal to Line" Tool Axis Guidance
This task shows how to insert a Multi-Axis Sweeping operation in the program. To create the operation you must define: the geometry to be machined the tool that will be used the parameters of the machining strategy the feedrates and spindle speeds the macros (transition paths) . with the tool axis guided in Normal to Line mode
More information can be found in Selecting Geometry. Open the MultiAxisMilling01.CATPart document, then select Machining > Surface Machining from the Start menu. Make the Manufacturing Program current in the specification tree. 1. Select the Multi-Axis Sweeping icon .
A Multi-Axis Sweeping entity along with a default tool is added to the program. The Multi-Axis Sweeping dialog box appears directly at the Geometry tab page . This tab page includes a sensitive icon to help you specify the geometry to be machined.
Version 5 Release 14
Page 49
The part surface of the icon is colored red indicating that this geometry is required. All other geometry is optional. 2. Select the Select faces item in the contextual menu of Part in the icon then select the desired face in the 3D window.
Version 5 Release 14
Page 50
Radial
Version 5 Release 14
Page 51
4. Select the red Line symbol in the icon then select the desired Axis line.
Version 5 Release 14
Page 52
5. Click the View Direction arrow (V) and select the part surface. The surface normal is used as the view direction. Click the Start Direction arrow (S) and set this direction to (0,0,1) in the dialog box that appears. A tool is proposed by default when you want to create a machining operation. If the proposed tool is not suitable, just select the Tool tab page to specify the tool you want to use.
This is described in Edit the Tool of an Operation. 6. Select the Feeds and Speeds tab page operation. 7. Select the Macros tab page retract motion, for example). See Define Macros of an Operation for an example of specifying transition paths on a multi-axis machining operation. to specify the operation's transition paths (approach and to specify the feedrates and spindle speeds for the
Version 5 Release 14
Page 53
Before accepting the operation, you should check its validity by replaying the tool path.
Version 5 Release 14
Page 54
Create a Multi-Axis Sweeping Operation with "4Axis Lead/Lag" Tool Axis Guidance
This task illustrates how to create a Multi-Axis Sweeping operation in the program. To create the operation you must define: the geometry to be machined the tool that will be used the parameters of the machining strategy mode
q
More information can be found in Selecting Geometry. Open the MultiAxisMilling01.CATPart document, then select Machining > Surface Machining from the Start menu. Make the Manufacturing Program current in the specification tree. 1. Select the Multi-Axis Sweeping icon .
A Multi-Axis Sweeping entity along with a default tool is added to the program. The Multi-Axis Sweeping dialog box appears directly at the Geometry tab page . This tab page includes a sensitive icon to help you specify the geometry to be machined.
Version 5 Release 14
Page 55
The part surface of the icon is colored red indicating that this geometry is required. All other geometry is optional. 2. Select the Select faces item in the contextual menu of Part in the icon then select the desired face in the 3D window.
The part surface of the icon is now colored green indicating that this geometry is now defined.
Version 5 Release 14
Page 56
Radial
Version 5 Release 14
Page 57
4. Click the View Direction arrow (V) and select the part surface. The surface normal is used as the view direction. Click the Start Direction arrow (S) and set this direction to (0,0,1) in the dialog box that appears. Click the 4-Axis Constraint arrow (N in the 3D window or the arrow normal to the plane in the sensitive icon) and set this direction in the dialog box that appears. This is the normal to the plane in which the tool axis is constrained. It is also possible to click the Overall Machining Direction arrow (M in the 3D window) to reverse this direction.
Version 5 Release 14
Page 58
The View and Start directions define the guiding plane for the operation.
5. Click Preview in the dialog box to verify the parameters that you have specified. A message box appears giving feedback about this verification. A tool is proposed by default when you want to create a machining operation. If the proposed tool is not suitable, just select the Tool tab page Please refer to Edit the Tool of an Operation. 6. Select the Feeds and Speeds tab page the operation. 7. Select the Macros tab page retract motion, for example). See Define Macros of an Operation for an example of specifying transition paths on a multi-axis machining operation. Before accepting the operation, you should check its validity by replaying the tool path. to specify the operation's transition paths (approach and to specify the feedrates and spindle speeds for to specify the tool you want to use.
Version 5 Release 14
Page 59
Create a Multi-Axis Sweeping Operation with "Optimized Lead" Tool Axis Guidance
This task illustrates how to create a Multi-Axis Sweeping operation in the program. To create the operation you must define: the geometry to be machined the tool that will be used the parameters of the machining strategy the feedrates and spindle speeds the macros (transition paths) . with the tool axis guided in Optimized Lead mode
More information can be found in Selecting Geometry. Open the MultiAxisMilling01.CATPart document, then select Machining > Surface Machining from the Start menu. Make the Manufacturing Program current in the specification tree. 1. Select the Multi-Axis Sweeping icon .
A Multi-Axis Sweeping entity along with a default tool is added to the program. The Multi-Axis Sweeping dialog box appears directly at the Geometry tab page . This tab page includes a sensitive icon to help you specify the geometry to be machined.
Version 5 Release 14
Page 60
The part surface of the icon is colored red indicating that this geometry is required. All other geometry is optional. 2. Select the Select faces item in the contextual menu of Part in the icon then select the desired face in the 3D window. The part surface of the icon is now colored green indicating that this geometry is now defined.
Version 5 Release 14
Page 61
Radial
Version 5 Release 14
Page 62
4. Click the View Direction arrow (V) and select the part surface. The surface normal is used as the view direction. Click the Start Direction arrow (S) and set this direction to (0,0,1) in the dialog box that appears.
The View and Start directions define the guiding plane for the operation.
Version 5 Release 14
Page 63
5. Click Preview in the dialog box to verify the parameters that you have specified. A message box appears giving feedback about this verification. A tool is proposed by default when you want to create a machining operation. If the proposed tool is not suitable, just select the Tool tab page Please refer to Edit the Tool of an Operation. 6. Select the Feeds and Speeds tab page operation. 7. Select the Macros tab page retract motion, for example). See Define Macros of an Operation for an example of specifying transition paths on a multi-axis machining operation. to specify the operation's transition paths (approach and to specify the feedrates and spindle speeds for the to specify the tool you want to use.
Before accepting the operation, you should check its validity by replaying the tool path. 8. Click OK to create the operation.
Version 5 Release 14
Page 64
the geometry to be machined the tool that will be used the parameters of the machining strategy Contours with the Guiding Strategy set to Between
More information can be found in Selecting Geometry. Open the MultiAxisMilling01.CATPart document, then select Machining > Surface Machining from the Start menu. Make the Manufacturing Program current in the specification tree. 1. Select the Multi-Axis Contour Driven icon a default tool is added to the program. The Multi-Axis Contour Driven dialog box appears directly at the Geometry tab page . This tab page includes a sensitive icon to help you specify the geometry to be machined. The part surface of the icon is colored red indicating that this geometry is required. . A Multi-Axis Contour Driven entity along with
2. Click the red area in the icon, then select the desired part in the 3D window. 3. Select the Strategy tab page Contours, . Make sure that the Guiding Strategy is set to Between
Version 5 Release 14
Page 65
Machining
Radial
Version 5 Release 14
Page 66
Version 5 Release 14
Page 67
4. Click the View Direction arrow (V) and select the part surface. The surface normal is used as the view direction. 5. Click the red Guide 1 curve in the icon then select the first guide curve in the model. You can position the tool with respect to this curve using using the setting: Inside, Outside or On. You can also specify an offset.
6. Click the red Guide 2 curve in the icon then select the second guide curve in the model. You can position the tool with respect to this curve using using the setting: Inside, Outside or On. You can also specify an offset.
Version 5 Release 14
Page 68
7. A tool is proposed by default when you want to create a machining operation. If the proposed tool is not suitable, just select the Tool tab page described in Edit the Tool of an Operation. 8. Select the Feeds and Speeds tab page operation. 9. If you want to specify approach and retract motion for the operation, select the Macros tab page to specify the desired transition paths. The general procedure for this is described in Define Macros of an Operation. 10. Before accepting the operation, you should check its validity by replaying the tool path. to specify the feedrates and spindle speeds for the to specify the tool you want to use. This is
Version 5 Release 14
Page 69
Version 5 Release 14
Page 70
More information can be found in Selecting Geometry. Open the MultiAxisMilling01.CATPart document, then select Machining > Surface Machining from the Start menu. Make the Manufacturing Program current in the specification tree. 1. Select the Multi-Axis Contour Driven icon .
A Multi-Axis Contour Driven entity along with a default tool is added to the program. The Multi-Axis Contour Driven dialog box appears directly at the Geometry tab page . This tab page includes a sensitive icon to help you specify the geometry to be machined. The part surface of the icon is colored red indicating that this geometry is required.
2. Click the red part surface in the icon then select the desired part in the 3D window.
Version 5 Release 14
Page 71
Machining
Version 5 Release 14
Page 72
Version 5 Release 14
Page 73
4. Click the red Guide 1 curve in the icon then select the desired guide curve in the model. 5. Click the View Direction arrow (V) and select the part surface. The surface normal is used as the view direction.
A tool is proposed by default when you want to create a machining operation. If the proposed tool is not suitable, just select the Tool tab page to specify the tool you want to use.
Version 5 Release 14
Page 74
7. If you want to specify approach and retract motion for the operation, select the Macros tab page to specify the desired transition paths. The general procedure for this is described in Define Macros of an Operation. Before accepting the operation, you should check its validity by replaying the tool path.
Version 5 Release 14
Page 75
More information can be found in Selecting Geometry. Open the MultiAxisMilling01.CATPart document, then select Machining > Surface Machining from the Start menu. Make the Manufacturing Program current in the specification tree. 1. Select the Multi-Axis Contour Driven icon .
A Multi-Axis Contour Driven entity along with a default tool is added to the program. The Multi-Axis Contour Driven dialog box appears directly at the Geometry tab page .
This tab page includes a sensitive icon to help you specify the geometry to be machined. The part surface of the icon is colored red indicating that this geometry is required.
2. Click the red area in the icon then select the desired part surface in the 3D window.
Version 5 Release 14
Page 76
Version 5 Release 14
Page 77
Radial
Version 5 Release 14
Page 78
4. Click the red Guide 1 in the icon then select the desired guide curve in the model. 5. Click the View Direction arrow (V) and select the part surface. The surface normal is used as the view direction.
A tool is proposed by default when you want to create a machining operation. If the proposed tool is not suitable, just select the Tool tab page to specify the tool you want to use.
This is described in Edit the Tool of an Operation. 6. Select the Feeds and Speeds tab page operation. 7. Select the Macros tab page retract motion, for example). See Define Macros of an Operation for an example of specifying transition paths on a machining operation. Before accepting the operation, you should check its validity by replaying the tool path. to specify the operation's transition paths (approach and to specify the feedrates and spindle speeds for the
Version 5 Release 14
Page 79
Version 5 Release 14
Page 80
the geometry to be machined the tool that will be used the parameters of the machining strategy the feedrates and spindle speeds the macros (transition paths) . with the tool axis guided in Lead and Tilt mode
Open the MultiAxisMilling01.CATPart document, then select Machining > Surface Machining from the Start menu. Make the Manufacturing Program current in the specification tree. 1. Select the Multi-Axis Curve Machining icon .
The Multi-Axis Curve Machining dialog box appears directly at the Geometry tab page . This page includes a sensitive icon to help you specify the geometry to be machined. Set the Curve Machining mode to Contact to drive the contact point.
Version 5 Release 14
Page 81
The part and guide curve in the icon are colored red indicating that this geometry is required for defining the operation. All other geometry is optional. 2. Click the red part in the icon, then select the four faces in the 3D window as shown in the figure below.
3. Click the red guide element in the icon, then select four edges in the 3D window as shown in the figure below. Note that a Guide is created for each set of continuous edges, and that discontinuous Guides are accepted. The four faces and the four edges are selected:
Version 5 Release 14
Page 82
The part and guide elements of the icon are now colored green indicating that this geometry is now defined. These are also indicated on the part. Make sure that the arrows representing the part surface orientation are all pointing upwards. 4. Select the Strategy tab page Machining . You can then use the tab pages to set parameters for:
Radial
Version 5 Release 14
Page 83
Axial
Finishing
Version 5 Release 14
Page 84
Tool Axis Specify Fixed Lead and Tilt with Lead angle = 20deg and Tilt angle = 0deg.
Version 5 Release 14
Page 85
A tool is proposed by default when you want to create a machining operation. If the proposed tool is not suitable, just select the Tool tab page the Tool of an Operation. 5. Select the Feeds and Speeds tab page operation. to specify the feedrates and spindle speeds for the to specify the tool you want to use. This is described in Edit
If you want to specify approach and retract motion for the operation, select the Macros tab page to specify the desired transition paths. The general procedure for this is described in Define Macros of an Operation. 6. Check the validity of the operation by replaying the tool path.
Version 5 Release 14
Page 86
Create a Multi-Axis Curve Machining Operation Between 2 curves with Tool Axis Interpolation
This task shows how to insert a 'Between 2 curves' Multi-Axis Curve Machining operation in the program. In this scenario the tool axis will be guided in Interpolation mode. To create the operation you must define:
q
the Curve Machining mode as Between 2 curves and the Curve Machining type as Tip the geometry to be machined the tool that will be used the parameters of the machining strategy the feedrates and spindle speeds the macros (transition paths) . with the tool axis guided in Interpolation mode
Open the MultiAxisMilling01.CATPart document, then select Machining > Surface Machining from the Start menu. Make the Manufacturing Program current in the specification tree. 1. Select the Multi-Axis Curve Machining icon .
The Multi-Axis Curve Machining dialog box appears directly at the Geometry tab page . This page includes a sensitive icon to help you specify the geometry to be machined. Set the Curve Machining mode to Between 2 curves.
Version 5 Release 14
Page 87
The top guiding curve in the icon is colored red indicating that this geometry is required for defining the operation. All other geometry is optional. Set the Curve Machining type to Tip to drive the extremity of the tool.
Version 5 Release 14
Page 88
2. Click the top guiding curve in the icon, then select the five edges in the 3D window as shown in the figure below.
The guide elements of the icon are now colored green indicating that this geometry is now defined. These are also indicated on the part. 3. Select the Strategy tab page Machining . You can then use the tab pages to set parameters for:
Radial
Version 5 Release 14
Page 89
Axial
Version 5 Release 14
Page 90
Finishing
Version 5 Release 14
Page 91
4. Click the tool axis arrow (A) in the sensitive icon, then specify the reference tool axis direction for the operation. You can do this by selecting a surface. In this case the surface normal is used.
Click one of the red interpolation axes in the sensitive icon, then select a position for the first interpolation axis. The axis is visualized by means of an arrow (I.1).
You can then specify the orientation of this axis using the Interpolation Axis dialog box that appears. If you select a surface, the surface normal is used. Select one or more positions for other interpolation axes and specify their orientations in the same way.
Version 5 Release 14
Page 92
A tool is proposed by default when you want to create a machining operation. If the proposed tool is not suitable, just select the Tool tab page to specify the tool you want to use.
This is described in Edit the Tool of an Operation. 5. Select the Feeds and Speeds tab page operation. 6. Check the validity of the operation by replaying the tool path. to specify the feedrates and spindle speeds for the
You can add approach and retract motions to the operation in the Macros tab page described in Define Macros of an Operation. 7. Click OK to create the operation.
. This is
Version 5 Release 14
Page 93
Create a Multi-Axis Curve Machining Operation Between 2 curves with Tangent Axis Guidance
This task shows how to insert a 'Between 2 curves' Multi-Axis Curve Machining operation in the program. In this scenario the tool axis will be guided in Tangent Axis mode along the isoparametrics of the selected drive surfaces. To create the operation you must define:
q
the Curve Machining mode as Between 2 curves and the Curve Machining type as Side the geometry to be machined the tool that will be used the parameters of the machining strategy the feedrates and spindle speeds the macros (transition paths) . with the tool axis guided in Tangent Axis mode
Open the MultiAxisMilling03.CATPart document, then select Machining > Surface Machining from the Start menu. Make the Manufacturing Program current in the specification tree. 1. Select the Multi-Axis Curve Machining icon .
The Multi-Axis Curve Machining dialog box appears directly at the Geometry tab page . This page includes a sensitive icon to help you specify the geometry to be machined. Set the Curve Machining mode to Between 2 curves.
Version 5 Release 14
Page 94
2. Click the top guiding curve in the icon. In the Edge Selection toolbar that appears, set Link types to Insert line then select the three edges on the part as shown in the figure below. Note that any gaps between the edges are filled thanks to the Insert link option.
Version 5 Release 14
Page 95
Set the Curve Machining type to Side to drive the flank of the tool.
drive surfaces and reference tool axis. You can use the tab pages to set parameters for:
q
Machining
Version 5 Release 14
Page 96
Radial
Axial
Version 5 Release 14
Page 97
Click the sensitive drive element in the icon, then select the three drive surfaces in the 3D window as shown in the figure.
Version 5 Release 14
Page 98
Version 5 Release 14
Page 99
A default reference tool axis is displayed in the 3D view. If needed, you can modify it by clicking the tool axis arrow (A) in the sensitive icon, then specifying a different tool axis direction. You can do this by selecting a surface. In this case the surface normal is used. When machining a strip (or band) for faces, the tool axis is deduced from the isoparametrics of the faces in order to ensure continuity of the trajectory. See Tangent Axis - Along isoparametric lines for more information. 4. A tool is proposed by default when you want to create a machining operation. If the proposed tool is not suitable, just select the Tool tab page This is described in Edit the Tool of an Operation. 5. Select the Feeds and Speeds tab page operation. 6. Check the validity of the operation by replaying the tool path. to specify the feedrates and spindle speeds for the to specify the tool you want to use.
You can add approach and retract motions to the operation in the Macros tab page described in Define Macros of an Operation.
. This is
Version 5 Release 14
Page 100
Version 5 Release 14
Page 101
the Curve Machining mode as Between curve and part and the Curve Machining type to Side the geometry to be machined the tool that will be used the parameters of the machining strategy the feedrates and spindle speeds the macros (transition paths) . with the tool axis guided in Interpolation mode
Open the MultiAxisMilling01.CATPart document, then select Machining > Surface Machining from the Start menu. Make the Manufacturing Program current in the specification tree. 1. Select the Multi-Axis Curve Machining icon .
The Multi-Axis Curve Machining dialog box appears directly at the Geometry tab page . This page includes a sensitive icon to help you specify the geometry to be machined.
Version 5 Release 14
Page 102
The top guiding curve and part bottom in the icon are colored red indicating that this geometry is required for defining the operation. All other geometry is optional. Set the Curve Machining type to Side to drive the tool flank. 2. Click the red bottom in the icon, then select the 6 faces in the 3D window as shown in the figure. 3. Click the top guiding curve in the icon, then select the 6 edges in the 3D window as shown in the figure. The part and guide elements of the icon are now colored green indicating that this geometry is now defined. These are also indicated on the part.
Version 5 Release 14
Page 103
. You can then use the tab pages to set parameters for:
Radial (set Radial strategy with Distance between paths = 3mm and Number of paths = 4)
Version 5 Release 14
Page 104
Axial
Finishing
Version 5 Release 14
Page 105
Version 5 Release 14
Page 106
5. Click the tool axis arrow (A) in the sensitive icon, then specify the reference tool axis direction for the operation. You can do this by selecting a surface. In this case the surface normal is used. Click one of the red interpolation axes in the sensitive icon, then select a position for the first interpolation axis. The axis is visualized by means of an arrow (I.1). You can then specify the orientation of this axis using the Interpolation Axis dialog box that appears. If you select a surface, the surface normal is used.
Select one or more positions for other interpolation axes and specify their orientations in the same way.
Version 5 Release 14
Page 107
A tool is proposed by default when you want to create a machining operation. If the proposed tool is not suitable, just select the Tool tab page to specify the tool you want to use.
This is described in Edit the Tool of an Operation. 6. Select the Feeds and Speeds tab page operation. 7. Check the validity of the operation by replaying the tool path. to specify the feedrates and spindle speeds for the
Version 5 Release 14
Page 108
You can add approach and retract motions to the operation in the Macros tab page described in Define Macros of an Operation. 8. Click OK to create the operation.
. This is
Version 5 Release 14
Page 109
Create a Multi-Axis Isoparametric Machining Operation with "Lead and Tilt" Tool Axis Guidance
This task illustrates how to create a Multi-Axis Isoparametric Machining operation in the program. To create the operation you must define:
q
the geometry to be machined the tool that will be used the parameters of the machining strategy the feedrates and spindle speeds the macros (transition paths) . with the tool axis guided in Lead and Tilt mode
Open the MultiAxisMilling02.CATPart document, then select Machining > Surface Machining from the Start menu. Make the Manufacturing Program current in the specification tree. 1. Select the Isoparametric Machining icon . An Isoparametric Machining entity along with
a default tool is added to the program. The Isoparametric Machining dialog box appears directly at the Geometry tab page .
Version 5 Release 14
Page 110
The part surface and corner points of the sensitive icon are colored red indicating that this geometry is required. All other geometry is optional. 2. Click the red part surface in the icon then select the desired surfaces in the 3D window. The Face Selection toolbar appears to help you select faces or belts of faces. These can be adjacent or nonadjacent. For more information please refer to Non-Adjacent Belts of Faces. Click a red point in the icon then select the four corner points of the selected surfaces. Machining starts from point 1 to point 2, and finishes either from point 3 to 4 or 4 to 3 (depending on the One way or Zig zag tool path style).
3. A default reference tool axis (A) is displayed. You can double click on this axis to modify it.
The part surface and corner points of the icon are now colored green indicating that this geometry is now defined. 4. Select the Strategy tab page Tool axis: to specify parameters for:
Version 5 Release 14
Page 111
Machining:
Radial:
Version 5 Release 14
Page 112
5. Click Preview in the dialog box to verify the parameters that you have specified. A message box appears giving feedback about this verification. A tool is proposed by default when you want to create a machining operation. If the proposed tool is not suitable, just select the Tool tab page Tool of an Operation. 6. Select the Feeds and Speeds tab page operation. 7. Select the Macros tab page to specify the operation's transition paths (approach and to specify the feedrates and spindle speeds for the to specify the tool you want to use. Please refer to Edit the
retract motion, for example). See Define Macros of an Operation for an example of specifying transition paths on a multi-axis machining operation. Before accepting the operation, you should check its validity by replaying the tool path.
Version 5 Release 14
Page 113
Version 5 Release 14
Page 114
Create a Multi-Axis Isoparametric Machining Operation with "4-Axis Lead/Lag" Tool Axis Guidance
This task illustrates how to create a Multi-Axis Isoparametric Machining operation in the program. To create the operation you must define: the geometry to be machined the tool that will be used the parameters of the machining strategy the feedrates and spindle speeds the macros (transition paths) . with the tool axis guided in 4-Axis Lead/Lag mode
Open the MultiAxisMilling02.CATPart document, then select Machining > Surface Machining from the Start menu. Make the Manufacturing Program current in the specification tree. 1. Select the Isoparametric Machining icon . An Isoparametric Machining entity along with
a default tool is added to the program. The Isoparametric Machining dialog box appears directly at the Geometry tab page .
Version 5 Release 14
Page 115
The part surface and corner points of the sensitive icon are colored red indicating that this geometry is required. All other geometry is optional. 2. Click the red part surface in the icon then select the desired surfaces in the 3D window. The Face Selection toolbar appears to help you select faces or belts of faces. These can be adjacent or non-adjacent. For more information please refer to Non-Adjacent Belts of Faces.
3. Click a red point in the icon then select the four corner points of the selected surfaces. Machining starts from point 1 to point 2, and finishes either from point 3 to 4 or 4 to 3 (depending on the One way or Zig zag tool path style). The part surface and corner points of the icon are now colored green indicating that this geometry is now defined.
Version 5 Release 14
Page 116
A default reference tool axis (A) and 4-Axis Constraint arrow (N) are displayed. You can double click on these axes to modify them.
Version 5 Release 14
Page 117
Click the 4-Axis Constraint arrow (N). This is the normal to the plane in which the tool axis is constrained. A dialog box appears showing the default direction. You can modify this direction, if needed.
q
Machining:
Radial:
Version 5 Release 14
Page 118
5. Click Preview in the dialog box to verify the parameters that you have specified. A message box appears giving feedback about this verification.
6. A tool is proposed by default when you want to create a machining operation. If the proposed tool is not suitable, just select the Tool tab page Please refer to Edit the Tool of an Operation. 7. Select the Feeds and Speeds tab page operation. 8. Select the Macros tab page retract motion, for example). See Define Macros of an Operation for an example of specifying transition paths on a multi-axis machining operation. 9. Before accepting the operation, you should check its validity by replaying the tool path. to specify the operation's transition paths (approach and to specify the feedrates and spindle speeds for the to specify the tool you want to use.
Version 5 Release 14
Page 119
Version 5 Release 14
Page 120
Create a Multi-Axis Isoparametric Machining Operation with "Interpolation" Tool Axis Guidance
This task illustrates how to create a Multi-Axis Isoparametric Machining operation in the program. To create the operation you must define: the geometry to be machined the tool that will be used the parameters of the machining strategy the feedrates and spindle speeds the macros (transition paths) . with the tool axis guided in Interpolation mode
Open the MultiAxisMilling04.CATPart document, then select Machining > Surface Machining from the Start menu. Make the Manufacturing Program current in the specification tree. 1. Select the Isoparametric Machining icon . An Isoparametric Machining entity along with
a default tool is added to the program. The Isoparametric Machining dialog box appears directly at the Geometry tab page .
Version 5 Release 14
Page 121
This tab page includes a sensitive icon to help you specify the geometry to be machined. The part surface and corner points of the icon are colored red indicating that this geometry is required. All other geometry is optional.
2. Click the red part surface in the icon then select the desired surface in the 3D window. The Face Selection toolbar appears to help you select faces or belts of faces. These can be adjacent or non-adjacent. For more information please refer to Non-Adjacent Belts of Faces. 3. Click the orange check surface in the icon then select the desired surface in the 3D window as shown below.
Version 5 Release 14
Page 122
4. Click a red point in the icon then select the four corner points of the selected surface. Machining starts from point 1 to point 2, and finishes either from point 3 to 4 or 4 to 3 (depending on the One way or Zig zag tool path style).
The part surface and corner points of the icon are now colored green indicating that this geometry is now defined. 4. Select the Strategy tab page Tool axis guidance: to specify parameters for:
Version 5 Release 14
Page 123
A default reference tool axis (A) is displayed. You can double click on this axis to modify it.
Machining:
Version 5 Release 14
Page 124
Radial:
Version 5 Release 14
Page 125
An interpolation axis (I) appears at each of the corners of the surface to be machined. Click on the axis symbol and specify the desired orientation using options proposed in the Interpol Axis dialog box that appears.
Version 5 Release 14
Page 126
In some cases, such as the machining of turbine blades, you need to avoid collisions and have a perfect fluidity of the tool trajectory. To achieve this, you can define additional interpolation axis on the part to machine, either by selecting existing points on the part, or by clicking on the part to create them interactively.
A dialog box opens to let you define this additional interpolation axis. If you select a point that does not belong to a selected face, the point is projected to the nearest select face. 6. Click Preview in the dialog box to verify the parameters that you have specified. A message box appears giving feedback about this verification.
Version 5 Release 14
Page 127
7. A tool is proposed by default when you want to create a machining operation. If the proposed tool is not suitable, just select the Tool tab page Please refer to Edit the Tool of an Operation. 8. Select the Feeds and Speeds tab page operation. 9. Select the Macros tab page retract motion, for example). See Define Macros of an Operation for an example of specifying transition paths on a multi-axis machining operation. 10. Before accepting the operation, you should check its validity by replaying the tool path. Without an additional interpolation axis: to specify the operation's transition paths (approach and to specify the feedrates and spindle speeds for the to specify the tool you want to use.
Version 5 Release 14
Page 128
Version 5 Release 14
Page 129
Auxiliary Operations
The tasks for inserting auxiliary operations in the manufacturing program are documented in the Machining Infrastructure User's Guide. Insert Tool Change: Select the Tool Change icon then select the tool type to be referenced in the tool change. Insert Machine Rotation: Select the Machine Rotation icon then specify the tool rotation characteristics. Insert Machining Axis System Change: Select the Machining Change icon then specify the characteristics of the new machining axis system. Insert PP Instruction: Select the PP Instruction icon then enter the syntax of the PP instruction. Insert COPY Operator (P2 functionality): Select the COPY Operator icon then select the reference operation. You can then specify the number of copies and the characteristics of the transformation. Insert TRACUT Operator (P2 functionality): Select the TRACUT Operator icon then select the reference operation. You can then specify the characteristics of the transformation. Insert Copy Transformation Instruction: Select the Copy Transformation icon then select the reference operation. You can then specify the number of copies and the characteristics of the transformation.
Version 5 Release 14
Page 130
Version 5 Release 14
Page 131
Machining Entities
The tasks for creating and managing specific entities of the Machining environment are documented in the Machining Infrastructure User's Guide.
q
Edit the Tool of a Machining Operation: Double click the machining operation in the program and select the Tool tab page to edit the tool characteristics or search for another tool. Edit a Tool in the Resource List: Double click a tool in the resource list and edit the tool characteristics in the Tool Definition dialog box. Edit a Tool Assembly in the Resource List: Double click a tool assembly in the resource list and edit the tool characteristics in the Tool Definition dialog box. Replace Tools in Resource List: Click the Replace Tools icon to rename tools already used in your document. Specify Tool Compensation Information: Double click a tool referenced in the program or resource list and specify the tool compensation information in the Compensation tab page of the Tool Definition dialog box . Create and Use Machining Patterns: Select Insert > Machining Feature > Machining Pattern then select a pattern of holes to be machined. Manufacturing View: Select a feature using the Manufacturing View and create operations based on this feature. Define Macros on a Milling Operation: Select the Macros tab page when creating or editing a milling operation, then specify the transition paths of the macros to be used in the operation. Define Macros on an Axial Machining Operation: Select the Macros tab page when creating or editing an axial machining operation, then specify the transition paths of the macros to be used in the operation. Build and Use a Macros Catalog. Manage the Status of Manufacturing Entities: Use the status lights to know whether or not your operation is correctly defined. Design or User Parameters in PP Instruction and APT Output.
Version 5 Release 14
Page 132
Batch Queue Management: Manage tool path computation outside the interactive CATIA session, with the possibility of scheduling the execution of several batch jobs. Generate NC Code in Interactive Mode: Select the Generate NC Code Interactively icon then select the manufacturing program to be processed and define processing options. Generate Documentation: Select the Generate Documentation icon to produce shop floor documentation in HTML format. Import an APT Source into the Program: Select the APT Import contextual command to insert an existing APT source into the current manufacturing program.
Version 5 Release 14
Page 133
Workbench Description
This section contains the description of the menu commands and icon toolbars that are specific to the Surface Machining workbench when Multi-Axis Surface Machining is installed.
Version 5 Release 14
Page 134
Tasks corresponding to general menu commands are described in the CATIA Version 5 Infrastructure User's Guide.
Insert Menu
Version 5 Release 14
Page 135
When Multi-Axis Surface Machining is installed with Prismatic Machining and Lathe Machining, a Multi-Axis Milling Operations toolbar is added to the workbench.
The additional commands are as follows. To create or edit a Multi-Axis Sweeping Operation. Basic tasks illustrate the following tool axis modes for this operation:
q
Lead and Tilt Fixed Thru a Point Normal to Line 4-Axis Lead/Lag Optimized Lead.
Version 5 Release 14
Page 136
To create or edit a Multi-Axis Isoparametric Machining Operation. Basic tasks illustrate the following Tool Axis modes for this operation:
q
To create or edit a Multi-Axis Contour Driven Operation. Basic tasks illustrate the following guiding strategies for this operation:
q
To create or edit a Multi-Axis Curve Machining Operation. Basic tasks illustrate the following machining modes for this operation:
q
Contact Between 2 curves with Tip / Interpolation machining Between a curve and part with Side / Interpolation machining.
The other toolbars of this workbench are described in the 3-Axis Surface Machining User's Guide.
Version 5 Release 14
Page 137
Specification Tree
Here is an example of a Process Product Resources (PPR) specification tree for Machining products.
Process List is a plan that gives all the activities and machining operations required to transform a part from a rough to a finished state. q Part Operation defines the manufacturing resources and the reference data.
q
Manufacturing Program is the list of all of the operations and tool changes performed. The example above shows that: r Drilling.1 is complete and has not been computed
r
Drilling.2 is complete but has been computed (by means of a replay) Drilling.3 does not have all of the necessary data (indicated by the exclamation mark symbol) Drilling.4 has been deactivated by the user (indicated by the brackets symbol) Drilling.5 has been modified and needs to be recomputed (indicated by the update symbol).
Product List gives all of the parts to machine as well as CATPart documents containing complementary geometry. Resources List gives all of the resources such as machine or tools that can be used in the program.
Version 5 Release 14
Page 138
Customizing
This section describes how to customize settings for Machining. Before you start your first working session, you can customize the way you work to suit your habits. This type of customization is stored in permanent setting files: these settings will not be lost if you end your session. Other tasks for customizing your Machining environment are documented in the Machining Infrastructure User's Guide: Build a Tools Catalog Access External Tools Catalogs Add User Attributes on Tool Types PP Word Syntaxes NC Documentation Workbenches and Tool Bars
1. Select the Tools -> Options command. The Options dialog box appears. 2. Select the Machining category in the tree to the left. The options for Machining settings appear, organized in tab pages.
Version 5 Release 14
Page 139
Parameters in this tab... Allow you to customize... General general settings for all Machining products Resources tooling, feeds&speeds and resource files Operation Output Program Photo/Video machining operations PP files and NC data output manufacturing programs (sequencing, and so on) material removal simulation
4. Set options in these tabs according to your needs. 5. Click OK to save the settings and quit the Options dialog box.
Version 5 Release 14
Page 140
General
This document explains how to customize general settings for Machining products.
Select the General tab, which is divided up into areas. Parameters in this area... Performance Tree Display Color and Highlight Tool Path Replay Complementary Geometry Design Changes Allow you to customize... settings for optimized performance display of the specification tree colors of displayed geometry and parameters tool display during tool path replay handling of geometry necessary for manufacturing use of the Smart NC mode and enhanced detection of design changes.
Performance
Click the Optimize button in order to automatically set a number of the Machining options for optimized performance. These options are listed in the Information dialog box that appears:
Version 5 Release 14
Page 141
If you click Yes, these options will be set as described in the dialog box. Note that, if needed, you may locally reset any of these options. If you click No, the options will remain with their current settings. The Information box also lists some recommendations for manually setting other options that have an influence on performance.
Tree Display
Version 5 Release 14
Page 142
Select the checkbox if you want the status of activities in the tree to be updated automatically. If this checkbox is not selected:
r
you can update activity status manually in your workbench using the Update Status icon Commands toolbar.
in the Auxiliary
the status of the activity after a manual update is masked at the first action on the node (for example, edit, replay, collapse/expand of a parent node). To retrieve the status of the activity you must select the Update Status icon again.
If this checkbox is not selected, performance is improved. By default, the checkbox is not selected.
Select the colors to be used for identifying the various manufacturing entities by means of the combos. Note that for Geometry that is not found or not up to date, you can select the colors used to display the valuated parameters in the corresponding Operation or Feature dialog boxes. For certain entities, you can select the corresponding checkbox to use highlighting. Performance is improved when all the Highlight checkboxes are selected.
Version 5 Release 14
Page 143
Display circles
Select this checkbox if you want to display each circular trajectory as a circular arc instead of a set of discretization points. The extremities of the circular arc are indicated by means of 'O' symbols. This allows better control of the Point by Point replay mode, where it is necessary to make several interactions to replay a circle (because of its representation by a set of points). With the graphic representation as a circle, only one interaction is necessary to perform the replay. By default, these checkboxes are not selected.
Color of feedrates
Select the colors to be used for identifying the various feedrate types by means of the combos. The selected colors will be displayed in the Different colors replay mode.
Complementary Geometry
Version 5 Release 14
Page 144
Select the checkbox to create a CATPart dedicated to manufacturing-specific geometry in the Product List of the PPR tree. By default, the checkbox is not selected.
Design Changes
Smart NC mode
Select this checkbox to activate the Smart NC mode. In this mode, an image of the geometry selected in machining operations is kept to allow analysis of design changes. Performance is improved when this checkbox is not selected.
Version 5 Release 14
Page 145
Resources
This document explains how to customize resource settings for Machining products.
Select the Resources tab, which is divided up into areas. Parameters in this area... Catalogs and Files Tool Selection Automatic Compute from Tool Feeds and Speeds Tool Query Mode in Machining Processes Instantiation Allow you to customize... the path name for resource files the selection of tools the update of feeds and speeds according to tooling data tool queries in machining processes
Enter the path of the folder containing tool catalogs, PP tables, macros, and machining processes. You can choose a folder by clicking the [...] button. You can concatenate paths using:
q
a semi colon (;) character for Windows platforms a colon (:) character for UNIX platforms.
For example, if the concatenated folders E:\DownloadOfCXR12rel\intel_a\startup and e:\users\jmn\NC in the figure above contain PP tables, then those PP tables will be available for selection in the Part Operation's Machine Editor dialog box. Please note that:
q
PP tables must be contained in folders named Manufacturing\PPTables tools must be contained in folders named Manufacturing\Tools.
Tool Selection
Version 5 Release 14
Page 146
Select the type of Tool Query to be executed when a Machining Process is instantiated:
q
automatically computed Tool Query interactively defined Tool Selection in case of multiple results interactively defined Tool Selection if no tool is found.
Depending on the selected option, the Advanced tab page of the Search Tool dialog box shows the solved Tool Query for each operation in the Machining Process. By default, the Automatic Tool Query option is selected.
Version 5 Release 14
Page 147
In the example below, you can choose one of the tools found in the ToolsSampleMP, or use the Look in combo to select a tool from the current document or another tool catalog.
Version 5 Release 14
Page 148
Operation
This document explains how to customize machining operation settings for Machining products.
Select the Operation tab, which is divided up into areas. Parameters in this area... Default Values Allow you to customize... the use of default values
After Creation or Machining Process (MP) what happens after creating machining operations or machining processes Instantiation When Copying Display User Interface the duplication of geometry links tool path displays of operations dialog boxes of 3-axis surface machining operations.
Default Values
Select the checkbox if you want operations to be created with the values used in the current program. The values and units of attributes at the creation step of an operation are set to the values and units of the last edited and validated operation whatever its type (that is, exit the operation definition dialog box using OK). Otherwise the default settings delivered with the application are used. By default, this checkbox is selected.
Select the desired checkboxes to specify conditions to be applied when you create machining operations or machining processes.
Version 5 Release 14
Page 149
When Copying
Select the checkbox if you want geometry links to be duplicated in a copied operation. Otherwise the geometry must be defined for the copied operation. Performance is improved when this checkbox is not selected. By default, this checkbox is selected.
Display
Select the checkbox if you want to display tool paths of operations in the current Part Operation. By default, this checkbox is not selected.
User Interface
Version 5 Release 14
Page 150
Select the checkbox if you want to have the possibility of simplifying the dialog boxes of machining operations (that is, you can display the minimum number of parameters necessary for a correct tool path). This setting is available for 3-axis surface machining operations only. By default, this checkbox is not selected.
Version 5 Release 14
Page 151
Output
This document explains how to customize data output settings for Machining products.
Select the Output tab, which is divided up into areas. Parameters in this area... Post Processor Tool Path Storage Tool Path Edition During Tool Path Computation Tool Output Point Tool Output Files ... Location Allow you to customize... the type of PP files to be used for generating NC code output and the path where these files are located the tool path storage capability the tool path edition capability contact point storage type of tool output point default paths for NC output files storage.
Post Processor
None: no Post Processor is defined. NC code output is not possible in this case Cenit: you can choose from among the Post Processor parameter files proposed by Cenit to generate your NC code IMS: you can choose from among the Post Processor parameter files proposed by Intelligent Manufacturing Software (IMS) to generate your NC code ICAM: you can choose from among the Post Processor parameter files proposed by ICAM Technologies Corporation (ICAM) to generate your NC code.
Enter the path of the folder containing Post processors. You can choose a folder by clicking the [...] button. File concatenation is possible. By default, the None option is selected.
Version 5 Release 14
Page 152
Select the desired option to store tool path data either in the current document or in an external file (as a tpl file). For operations with large tool paths (more than 100 000 points), tool path storage in an external file is recommended. By default, the Store tool path in the current document option is selected.
Select the checkbox if you want to be able to edit tool paths even when the operation is locked. This capability is available only for activities with a tool path node in the specification tree. By default, this checkbox is selected.
Select the checkbox if you want to store contact points in the tool path. Performance is improved when this checkbox is not selected. By default, this checkbox is selected.
Select the desired option to select one of the following as output point:
q
tool tip tool center point tool center point for ball end tools (that is, any tool with the Ball-end tool attribute selected or an end mill whose nominal diameter is equal to twice the corner radius).
Version 5 Release 14
Page 153
Performance is better when the Tool Tip option is selected. By default, the Tool Tip option is selected.
Specify default locations for storing Tool Path files, NC Documentation, and NC Code output. You can store tool paths files (tpl files) in the same folder as the CATProcess by selecting the checkbox. This allows you to store these files according to your CATProcess context. Otherwise, you can choose another location by clicking the [...] button. For NC Documentation, and NC Code output you can choose a folder easily by clicking the [...] button. You can customize the extension to be used for NC Code output (by default, the suffix used is CATNCCode). Please note that Video results are stored in the NC Code output directory. This is done by using the Associate Video Result to Machining Operation icon in the Tool Path Replay dialog box.
By default, the Tool path: Store at same location as the CATProcess checkbox is not selected.
Version 5 Release 14
Page 154
Program
This document explains how to customize manufacturing program settings for Machining products.
Select the Program tab to customize program auto-sequencing rules and priorities. These settings are mainly intended for the administrator. Make sure that the document in the sequencing rules path (AllSequencingRules.CATProduct in the example below) is accessible in Read/Write.
Auto Sequencing
allow the user to filter rules allow the user to modify rule priorities.
Version 5 Release 14
Page 155
Photo/Video
This document explains how to customize material removal simulation settings for Machining products.
Select the Photo/Video tab, which is divided up into areas. Parameters in this area... Simulation at Video Photo Performance Color Positioning Move Allow you to customize... material removal simulation at program of Part Operation level Video material removal simulation options Photo material removal simulation options settings that influence performance color during material removal simulation allowed tool axis variation between two operations
Simulation at
Select the desired option to perform material removal simulation at either Program or Part Operation level. Depending on the selected level, simulation begins either from the start of the manufacturing program or from the start of the Part Operation. Best performance is obtained with Program level. By default, the Program level option is selected.
Video
Version 5 Release 14
Page 156
Collision detection
Select the desired Collisions detection option to:
q
ignore collisions during the Video simulation stop the Video simulation at the first collision continue the Video simulation even when collisions are detected. In this case, you can consult the list of collisions at any time during the simulation.
Best performance is obtained when collisions are ignored. By default, the Ignore option is selected.
Touch is collision
Select the Touch is collision checkbox if you want touch (or contact) type of collision to be detected. By default, this checkbox is selected.
Photo
Select the desired Fault box type for examining remaining material or gouges:
q
Transparent: to display a transparent bounding box Wireframe: to display a wireframe bounding box None: if no bounding box is required.
Best performance is obtained when no bounding box is required and the checkbox is not selected. By default, the Wireframe option is selected. Select the checkbox to compute all information at picked point. By default, this checkbox is not selected.
Version 5 Release 14
Page 157
Best performance is obtained when Fault box: None is selected and the checkbox is not selected.
Performance
Smaller: The picture shows a rough approximation of a tool with six facets. Note that the chord deviation is always inside the actual circle, and that the points are always on the circle (accurate).
This is the most accurate method for the Arc through Three Points command.
q
Standard: The picture shows a rough approximation of a tool with six facets. Note that the chord deviation is partly inside and partly outside the actual circle, and that the points are not always on the circle.
Version 5 Release 14
Page 158
This is the best method for material removal simulation. However, this is not suitable for the Arc through Three Points command.
q
Larger: The picture shows a rough approximation of a tool with six facets. Note that the chord deviation is outside the actual circle, and that the points are not on the circle.
This is not suitable for the Arc through Three Points command. However, it can be useful for gouge detection.
Photo resolution
Best performance is obtained when the Photo resolution is set to 0. In this case, a detailed simulation of a portion of the part can be obtained using the Closeup command. Increasing the resolution improves machining accuracy and gives a very detailed simulation. However, this requires increased memory and computation time. By default, this resolution is set to 0.
Color
Version 5 Release 14
Page 159
Set the tool (and associated machined area) color to be the same as or different from the last tool, or have different colors for all tools. Best performance is obtained with same colored tools. By default, the All different option is selected. Assign colors to the different tools using the associated color combo. Assign colors to tool holders, parts, and fixtures using the associated color combos.
Positioning Move
Set the Maximum tool axis variation that is to be allowed between the end point of an operation and the start point of the next operation. If the tool axis varies by an amount greater than the specified value, then the tool is positioned at the start of the following operation. By default, this angle is set to 1degree.
Version 5 Release 14
Page 160
Reference Information
Reference information that is specific to the Multi-Axis Surface Machining product can be found in this section. Multi-Axis Sweeping Multi-Axis Isoparametric Machining Multi-Axis Contour Driven Multi-Axis Curve Machining Collision Checking Essential reference information on the following topics is provided in the Machining Infrastructure User's Guide. Machining Resources NC Macros PP Tables and PP Word Syntaxes Feeds and Speeds APT Formats CLfile Formats
Version 5 Release 14
Page 161
Multi-Axis Sweeping
The information in this section will help you create and edit Multi-Axis Sweeping operations in your Machining program. Select the Multi-Axis Sweeping icon, then select the geometry to be machined . More
information can be found in Selecting Geometry. A number of strategy parameters machining criteria radial conditions tool axis guidance cutter compensation. are available for defining:
, and NC macros
as needed.
Version 5 Release 14
Page 162
Zig Zag: the machining direction is reversed from one path to the next One way: the same machining direction is used from one path to the next.
Machining tolerance Specifies the maximum allowed distance between the theoretical and computed tool path. Consider it to be the acceptable chord error. Maximum discretization step Ensures linearity between points that are far apart. Maximum discretization angle Specifies the maximum angular change of tool axis between tool positions. It is used to add more tool positions (points and axis) if value is exceeded. Minimum path length Specifies the minimum length of path to be taken into account. The Maximum discretization step and Maximum discretization angle influence the number of points on the tool path. The values should be chosen carefully if you want to avoid having a high concentration of points along the tool trajectory. These parameters also apply to macro paths that are defined in machining feedrate. They do not apply to macro paths that do not have machining feedrate (RAPID, Approach, Retract, User, and so on). Default value for Maximum discretization step is 100 m. Default value for Maximum discretization angle is 180 degrees.
Version 5 Release 14
Page 163
Radial strategy
Defines how the distance between two consecutive paths is to be computed. Scallop height:
The associated parameter is Scallop height that specifies the maximum scallop height between two consecutive tool paths in a radial strategy. Distance on part:
The associated parameter is Distance between paths that defines the maximum distance between two consecutive tool paths in a radial strategy. Distance on plane:
Version 5 Release 14
Page 164
The associated parameter is Distance between paths that defines the maximum distance between two consecutive tool paths in a radial strategy. Number of paths:
The associated parameter is Number of paths that defines the number of tool paths in a radial strategy. Stepover side Specifies the side of the guiding plane that will be used to determine the overall machining direction.
Version 5 Release 14
Page 165
V, for the view direction, S, for the start direction, A, for the tool axis direction.
The view and the start directions define the machining guiding plane: machining is done in planes parallel to the guiding plane. The tool axis definition depends on the Tool axis mode. The tool axis arrow turns white when its definition box is not available (e.g. when the tool axis is defined through a point or a line, ...). A click on one of the direction arrows displays its definition box.
q
View direction:
Version 5 Release 14
Page 166
Start direction:
Version 5 Release 14
Page 167
Version 5 Release 14
Page 168
Specifies how the tool axis is to be guided. Below you will find the explanations of the various modes, then the explanations of the associated parameters.
In this mode the tool axis is normal to the part surface with respect to a given lead angle (alpha) in the forward tool motion and with respect to a given tilt angle (beta) in the perpendicular direction to this forward motion.
Version 5 Release 14
Page 169
Fixed lead and tilt: Here both the lead and tilt angles are constant.
Variable lead and fixed tilt: Here the tool axis can vary from the specified lead angle within an allowed range, the tilt angle remaining constant. The allowed range is defined by Minimum and Maximum lead angles.
Fixed lead and variable tilt: Here the tool axis can vary from the specified tilt angle within an allowed range, the lead angle remaining constant. The allowed range is defined by an Allowed tilt (the tool axis can move within a range of +/ - Allowed tilt angle).
Version 5 Release 14
Page 170
The purpose of the variable modes is to avoid collisions between the part to machine and the tool.
Fixed Axis
Version 5 Release 14
Page 171
Thru a Point
The tool axis passes through a specified point. The tool axis can be oriented To the point or From the point. Click the point in the sensitive icon and select a point in the graphic area. Then decide whether the tool axis is defined from that point or to that point by clicking of the toggle From/To in the sensitive icon.
Normal to Line
Version 5 Release 14
Page 172
The tool axis passes through a specified curve, and is normal to this curve at all points. The tool axis can be oriented To the line or From the line. Click the point in the sensitive icon and select a line in the graphic area. Then decide whether the tool axis is defined from that line or to that line by clicking of the toggle From/To in the sensitive icon.
Optimized Lead
Version 5 Release 14
Page 173
The tool axis is allowed to vary from the specified lead angle within an allowed range. The allowed range is defined by Minimum and Maximum lead angles. The back of the cutter is to be kept clear of the part by means of a Minimum heel distance.
Version 5 Release 14
Page 174
lead defined as minimum to fit the part curvature lead increases if necessary to respect the Minimum heel distance.
If the required lead is outside the allowed range, the tool position will not be kept in the tool path. The maximum material removal is obtained when the tool curvature along the trajectory matches the part curvature.
4-axis Lead/Lag
Version 5 Release 14
Page 175
The tool axis is normal to the part surface with respect to a given lead angle in the forward direction and constrained to a specified plane. Click the 4-Axis Constraint arrow (N in the 3D window or the arrow normal to the plane in the sensitive icon) and set this direction in the dialog box that appears. This is the normal to the plane in which the tool axis is constrained.
Version 5 Release 14
Page 176
The tool axis is computed like in Lead and Tilt mode and then projected into the constraint plane.
Lead angle Specifies a user-defined incline of the tool axis in a plane defined by the direction of motion and the normal to the part surface. The lead angle is with respect to the part surface normal. Maximum lead angle Specifies a maximum lead angle. Minimum lead angle Specifies a minimum lead angle. Tilt angle Specifies a user-defined incline of the tool axis in a plane normal to the direction of motion. The tilt angle is with respect to the part surface normal. Allowed tilt Specifies the range of allowed tilt variation. Minimum heel distance Allows the back of the cutter to be kept clear of the part (for example, when machining a smooth concave ruled part in Optimized Lead).
Version 5 Release 14
Page 177
(Double-click the part operation and push the Machine icon to open the Machine Editor)
In the Machine Editor, the Compensation tab contains options for: globally defining the 3D contact cutter compensation mode: None/Contact/Tip and Contact imposing the compensation mode to all operations supporting the selected mode whatever the choice defined at machining operation level.
If the options are set as follows, compensation can be managed at machining operation level.
In this case a Compensation tab appears in the Strategy page of the machining operation editor, and the following options are available.
Output type Allows you to manage the generation of Cutter compensation (CUTCOM) instructions in the NC data output: The following options are proposed:
q
3D Contact (G29/CAT3Dxx) The tool contact point will be visualized during tool path replay. Cutter compensation instructions are automatically generated in the NC data output. An approach macro must be defined to allow the compensation to be applied. Example of generated APT source:
Version 5 Release 14
Page 178
$$ Start generation of : Multi-Axis Sweeping.1 FEDRAT/ 1000.0000,MMPM SPINDL/ 70.0000,RPM,CLW CUTCOM/NORMPS $$ START CUTCOM NORMPS XC, YC, ZC, XN, YN, ZN, I, J, K .../... CUTCOM/OFF $$ END CUTCOM NORMPS XC, YC, ZC, XN, YN, ZN, I, J, K $$ End of generation of : Multi-Axis Sweeping.1 None Cutter compensation instructions are not automatically generated in the NC data output. However, CUTCOM instructions can be inserted manually. For more information, please refer to How to generate CUTCOM syntaxes provided in the Prismatic Machining User's Guide.
Part with possible Offset on Part. Check elements with possible Offset on Check. Areas to avoid. Limiting Contour.
Version 5 Release 14
Page 179
You can use Offset Groups and Features when defining geometry. In R13, the behavior of offset group has changed and is now similar to that of 3 Axis Surface Machining.
a ball-end tool for Fixed lead and variable tilt tool axis guidance a filleted-end tool for Variable lead and fixed tilt tool axis guidance.
Version 5 Release 14
Page 180
Version 5 Release 14
Page 181
A number of strategy parameters machining criteria radial conditions tool axis guidance cutter compensation.
, and NC macros
as needed.
Tool path style Indicates the cutting mode of the operation: q Zig Zag: the machining direction is reversed from one path to the next
q
One way: the same machining direction is used from one path to the next.
Machining tolerance Specifies the maximum allowed distance between the theoretical and computed tool path. Consider it to be the acceptable chord error. Maximum discretization step Ensures linearity between points that are far apart. Maximum discretization angle Specifies the maximum angular change of tool axis between tool positions. It is used to add more tool positions (points and axis) if value is exceeded.
Version 5 Release 14
Page 182
The Maximum discretization step and Maximum discretization angle influence the number of points on the tool path. The values should be chosen carefully if you want to avoid having a high concentration of points along the tool trajectory. These parameters also apply to macro paths that are defined in machining feedrate. They do not apply to macro paths that do not have machining feedrate (RAPID, Approach, Retract, User, and so on). Default value for Maximum discretization step is 100 m. Default value for Maximum discretization angle is 180 degrees.
Stepover
Defines how the distance between two consecutive paths is to be computed. You can choose to define it by
q
Scallop height,
The associated parameter is Scallop height that specifies the maximum scallop height between two consecutive tool paths in a radial strategy.
Version 5 Release 14
Page 183
Distance on part,
The associated parameter is Distance between paths that defines the maximum distance between two consecutive tool paths in a radial strategy.
q
The associated parameter is Number of paths that defines the number of tool paths in a radial strategy.
In Zig zag mode, the tool path generated always starts from point 1 to point 2 and finishes from point 3 to point 4. For this purpose, an additional path may be added on top of the radial strategy criterion. In One way mode, all paths are oriented from point 1 to point 2. For this purpose, the tool path may finish on point 3 or point 4. Those rules also applies when Skip path or Start extension/End extension are active.
Skip path
You may also choose to skip (not machine) the first or last path or both of the tool path in all three of the radial strategies.
Version 5 Release 14
Page 184
Specifies the length of an additional machined area located before the first path on part. This value can be either positive (the global machined area is extended) or negative (the global machined area is shrunk).
End extension Specifies the length of an additional machined area located after the last path on part. This value can be either positive (the global machined area is extended) or negative (the global machined area is shrunk). Example : Case 1 : Tool path generated with the Radial strategy set to Number of paths=5.
Case 2 : the same with Skip path set on First and last.
Version 5 Release 14
Page 185
Specifies how the tool axis is to be guided. Below you will find the explanations of the various Guidance types, then the explanations of the associated parameters. (Only Tool Axis Parameters tabs containing parameters have been captured)
In this mode the tool axis is normal to the part surface with respect to a given lead angle (alpha) in the forward tool motion
Version 5 Release 14
Page 186
and with respect to a given tilt angle (beta) in the perpendicular direction to this forward motion.
Fixed lead and tilt: Here both the lead and tilt angles are constant.
Variable lead and fixed tilt: Here the tool axis is allowed to move from the specified lead angle within a specified range, the tilt angle remaining constant.
Fixed lead and variable tilt: Here the tool axis is allowed to move from the specified tilt angle within a specified range, the lead angle remaining constant.
Version 5 Release 14
Page 187
Fixed Axis
Interpolation
Version 5 Release 14
Page 188
The tool axis is interpolated between two selected axes. Enter the Allowed tilt value.
Thru a Point
Version 5 Release 14
Page 189
The tool axis passes through a specified point. The tool axis can be oriented To the point or From the point.
Normal to Line
The tool axis passes through a specified curve, and is normal to this curve at all points. The tool axis can be oriented To or
Version 5 Release 14
Page 190
Optimized Lead
The tool axis is allowed to vary from the specified lead angle within an allowed range. The allowed range is defined by Minimum and Maximum lead angles. The back of the cutter is to be kept clear of the part by means of a Minimum heel distance.
Version 5 Release 14
Page 191
lead defined as minimum to fit the part curvature lead increases if necessary to respect the Minimum heel distance.
If the required lead is outside the allowed range, the tool position will not be kept in the tool path. The maximum material removal is obtained when the tool curvature along the trajectory matches the part curvature.
4-axis Lead/Lag
Version 5 Release 14
Page 192
The tool axis is normal to the part surface with respect to a given lead angle in the forward direction and is constrained to a specified plane.
The tool axis is computed like in Lead and Tilt mode and then projected into the constraint plane.
4-axis Tilt
Version 5 Release 14
Page 193
The tool axis is normal to the part surface with respect to a given tilt angle and is constrained to a specified plane.
This is dedicated to milling parts with tool axis nearly parallel to the part itself (near flank milling). This axis strategy is primary dedicated to NC machine whose configuration is A+C, but can be used on any other multi-axis machine. The figure below shows a machine with A and C axis on the table.
When A=C=0.00, the normal to the table is equal to the spindle orientation of the machine (which is fixed and equal to Z, there is no rotary axis on the head).
Version 5 Release 14
Page 194
On such a configuration, 4-axis Tilt strategy can be used to achieve a tool path in which the value of the A machine axis will be constant. Tool axis variation is provided by the C machine axis variation. You are able to define the 4-axis constraint direction (that is, the direction in which tool axis component will be constant). In the figure below, the highlight of the table shows that this direction has been defined by the normal to the table.
Version 5 Release 14
Page 195
Lead angle Specifies a user-defined incline of the tool axis in a plane defined by the direction of motion and the normal to the part surface. The lead angle is with respect to the part surface normal. Maximum lead angle Specifies a maximum lead angle. Minimum lead angle Specifies a minimum lead angle. Tilt angle Specifies a user-defined incline of the tool axis in a plane normal to the direction of motion. The tilt angle is with respect to the part surface normal. Allowed tilt Specifies the range of allowed tilt variation. Minimum heel distance Allows the back of the cutter to be kept clear of the part (for example, when machining a smooth concave ruled part with Optimized Lead tool axis guidance).
Version 5 Release 14
Page 196
In the Machine Editor, the Compensation tab contains options for: globally defining the 3D contact cutter compensation mode: None/Contact/Tip and Contact imposing the compensation mode to all operations supporting the selected mode whatever the choice defined at machining operation level.
If the options are set as follows, compensation can be managed at machining operation level.
In this case a Compensation tab appears in the Strategy page of the machining operation editor, and the following options are available.
Version 5 Release 14
Page 197
Output type Allows you to manage the generation of Cutter compensation (CUTCOM) instructions in the NC data output: The following options are proposed:
q
3D Contact (G29/CAT3Dxx) The tool contact point will be visualized during tool path replay. Cutter compensation instructions are automatically generated in the NC data output. An approach macro must be defined to allow the compensation to be applied. Example of generated APT source: $$ Start generation of : Multi-Axis Isoparametric.1 FEDRAT/ 1000.0000,MMPM SPINDL/ 70.0000,RPM,CLW CUTCOM/NORMPS $$ START CUTCOM NORMPS XC, YC, ZC, XN, YN, ZN, I, J, K .../... CUTCOM/OFF $$ END CUTCOM NORMPS XC, YC, ZC, XN, YN, ZN, I, J, K $$ End of generation of : Multi-Axis Isoparametric.1 None Cutter compensation instructions are not automatically generated in the NC data output. However, CUTCOM instructions can be inserted manually. For more information, please refer to How to generate CUTCOM syntaxes provided in the Prismatic Machining User's Guide.
Part elements (faces or belts of faces) with possible Offset on Part. Faces and belts of faces can be adjacent or nonadjacent.
Version 5 Release 14
Page 198
Check elements with possible Offset on Check. Up to four Corner points for each face or belt of faces.
Parts 1.1 and 1.2 make up a belt of adjacent faces. Part 2.1 is a non-adjacent face. Part 3.1 is a non-adjacent face (for example, an IGES design part). Parts 4.1 and 4.2 make up a belt of adjacent faces.
In this case corners must be selected for each face and belt of face. Also an orientation (side to mill) must be defined for each face and belt of faces.
Version 5 Release 14
Page 199
Version 5 Release 14
Page 200
A Clearance macro can be used in a machining operation to avoid a fixture, for example.
Version 5 Release 14
Page 201
Between contours where the tool sweeps between guide contours, Parallel contours where the tool sweeps out an area by following contours parallel to a reference contour, Spine contour where the tool sweeps across a contour in perpendicular planes.
Depending on the chosen strategy, select the necessary guiding elements. Then set the following strategy parameters according to the desired machining:
q
, and NC macros
as needed.
Version 5 Release 14
Page 202
Zig Zag: the machining direction is reversed from one path to the next One way: the same machining direction is used from one path to the next.
Machining tolerance Specifies the maximum allowed distance between the theoretical and computed tool path. Maximum discretization step Ensures linearity between points that are far apart. Maximum discretization angle Specifies the maximum angular change of tool axis between tool positions. It is used to add more tool positions (points and axis) if value is exceeded. Minimum path length Specifies the minimum length that a path needs to have to be taken into account.
Version 5 Release 14
Page 203
The Maximum discretization step and Maximum discretization angle influence the number of points on the tool path. The values should be chosen carefully if you want to avoid having a high concentration of points along the tool trajectory. These parameters also apply to macro paths that are defined in machining feedrate. They do not apply to macro paths that do not have machining feedrate (RAPID, Approach, Retract, User, and so on). Default value for Maximum discretization step is 100 m. Default value for Maximum discretization angle is 180 degrees.
Those parameters are available only when the guiding strategy is Parallel contour.
Version 5 Release 14
Page 204
Offset on contour Distance the tool will be from the guide contour at the beginning of the operation Maximum width to machine Specifies the width to machine starting from the guide contour in the stepover direction. Stepover side Defines the side of the contour where machining will be performed (left or right), i.e. if you choose Left, the tool will machine on the left side of the guide contour for the Maximum width distance, Direction
q
From contour: machining starts from the guide contour (in red in the figure below) over an area defined by the maximum width to machine.
To contour: machining is done up to the guide contour (in red in the figure below) over an area defined by the maximum width to machine.
The limit of the area to machine is indicated in yellow in the figures above.
Version 5 Release 14
Page 205
Defines how the distance between two consecutive paths is to be computed. Scallop height:
The associated parameter is Scallop height that specifies the maximum scallop height between two consecutive tool paths in a radial strategy. Distance on part:
Version 5 Release 14
Page 206
The associated parameter is Distance between paths that defines the maximum distance between two consecutive tool paths in a radial strategy. Distance on plane:
The associated parameter is Distance between paths that defines the maximum distance between two consecutive tool paths in a radial strategy. Number of paths:
The associated parameter is Number of paths that defines the number of tool paths in a radial strategy.
Version 5 Release 14
Page 207
The following offsets and positional modifiers allow you to extend or reduce the area to machine in the Between Contours guiding strategy without needing to create additional geometry. Offset on guide 1 Specifies an offset on the first guide contour in Between Contours guiding strategy. Offset on guide 2 Specifies an offset on the second guide contour in Between Contours guiding strategy. Position on guide 1 Specifies the position of the tool with respect to the first guide contour: Inside, Outside or On. Position on guide 2 Specifies the position of the tool with respect to the second guide contour: Inside, Outside or On.
Below you will find the explanations of the various Guidance types and tool axis modes, then the explanations of the associated parameters. (Only Tool Axis Parameters tabs containing parameters have been captured)
Version 5 Release 14
Page 208
In this mode the tool axis is normal to the part surface with respect to a given lead angle in the forward tool motion and with respect to a given tilt angle in the perpendicular direction to this forward motion.
Guidance Specifies how the tool axis is to be guided. There are several types of lead and tilt modes as follows:
q
Fixed lead and tilt: Here both the lead and tilt angles are constant.
Version 5 Release 14
Page 209
Variable lead and fixed tilt: Here the tool axis is allowed to move from the specified lead angle within a specified range, the tilt angle remaining constant.
Fixed lead and variable tilt: Here the tool axis is allowed to move from the specified tilt angle within a specified range, the lead angle remaining constant.
The purpose of the variable modes is to avoid collisions between the part to machine and the tool.
Version 5 Release 14
Page 210
Fixed Axis
Thru a Point
The tool axis passes through a specified point. The tool axis can be oriented to point To or From the point.
Normal to Line
Version 5 Release 14
Page 211
The tool axis passes through a specified curve, and is normal to this curve at all points. The tool axis can be oriented to point To or From the line.
Optimized Lead
he tool axis is allowed to vary from the specified lead angle within an allowed range. The allowed range is defined by Minimum and Maximum lead angles. The back of the cutter is to be kept clear of the part by means of a Minimum heel distance.
Version 5 Release 14
Page 212
lead defined as minimum to fit the part curvature lead increases if necessary to respect the Minimum heel distance.
If the required lead is outside the allowed range, the tool position will not be kept in the tool path. The maximum material removal is obtained when the tool curvature along the trajectory matches the part curvature.
4-axis Lead/Lag
The tool axis is normal to the part surface with respect to a given lead angle in the forward direction and is constrained to a specified plane.
The tool axis is computed like in Lead and Tilt mode and then projected into the constraint plane. Lead angle Specifies a user-defined incline of the tool axis in a plane defined by the direction of motion and the normal to the part surface. The lead angle is with respect to the part surface normal. Maximum lead angle Specifies a maximum lead angle. Minimum lead angle Specifies a minimum lead angle. Tilt angle Specifies a user-defined incline of the tool axis in a plane normal to the direction of motion. The tilt angle is with respect to the part surface normal.
Version 5 Release 14
Page 213
Allowed tilt Specifies the range of allowed tilt variation. Minimum heel distance Allows the back of the cutter to be kept clear of the part (for example, when machining a smooth concave ruled part with Optimized Lead tool axis guidance).
In the Machine Editor, the Compensation tab contains options for: globally defining the 3D contact cutter compensation mode: None/Contact/Tip and Contact imposing the compensation mode to all operations supporting the selected mode whatever the choice defined at machining operation level.
If the options are set as follows, compensation can be managed at machining operation level.
In this case a Compensation tab appears in the Strategy page of the machining operation editor, and the
Version 5 Release 14
Page 214
Output type Allows you to manage the generation of Cutter compensation (CUTCOM) instructions in the NC data output: The following options are proposed:
q
3D Contact (G29/CAT3Dxx) The tool contact point will be visualized during tool path replay. Cutter compensation instructions are automatically generated in the NC data output. An approach macro must be defined to allow the compensation to be applied. Example of generated APT source: $$ Start generation of : Multi-Axis Contour Driven.1 FEDRAT/ 1000.0000,MMPM SPINDL/ 70.0000,RPM,CLW CUTCOM/NORMPS $$ START CUTCOM NORMPS XC, YC, ZC, XN, YN, ZN, I, J, K .../... CUTCOM/OFF $$ END CUTCOM NORMPS XC, YC, ZC, XN, YN, ZN, I, J, K $$ End of generation of : Multi-Axis Contour Driven.1 None Cutter compensation instructions are not automatically generated in the NC data output. However, CUTCOM instructions can be inserted manually. For more information, please refer to How to generate CUTCOM syntaxes provided in the Prismatic Machining User's Guide.
Version 5 Release 14
Page 215
Part with possible Offset on Part. r For Between Contours strategy, the area to machine on the selected part is determined by selecting two guide curves and two limit curves. Tool paths are parallel to the selected guide curves.
r
For Parallel Contours strategy, the area to machine on the selected part is determined by selecting a guide curve specifying a maximum width to machine. Tool paths are parallel to the spine curve. For Spine Contour strategy, the area to machine on the selected part is determined by selecting a spine curve. Tool paths are perpendicular to the spine curve.
Check elements with possible Offset on Check. Areas to avoid. Limiting Contour, which defines the limit for machining on the part.
You can use Offset Groups and Features when defining geometry. In R13, the behavior of offset group has changed and is now similar to that of 3 Axis Surface Machining. Collision Checking is also available.
Version 5 Release 14
Page 216
Version 5 Release 14
Page 217
to be machined.
A number of strategy parameters machining criteria radial conditions axial conditions finishing tool axis guidance
, and NC macros
as needed.
The Stepover tab has been split into Radial and Axial tabs Tool path style has been moved from the Stepover tab to the Machining tab Sequencing has been moved from the Stepover tab to the Machining tab and enhanced
Version 5 Release 14
Page 218
Tool path style Indicates the cutting mode of the operation: q Zig Zag: the machining direction is reversed from one path to the next
q
One way: the same machining direction is used from one path to the next.
Machining tolerance Specifies the maximum allowed distance between the theoretical and computed tool path. Direction of cut Specifies how milling is to be done: q Climb milling: the front of the advancing tool (in the machining direction) cuts into the material first
q
Conventional milling: the rear of the advancing tool (in the machining direction) cuts into the material first
Specifies in which order the machining is to be done: Radial first (by segment): the order is axial machining first, then the radial machining, and all the levels of the current couple of relimitation points are machined before the going to the next couple of relimitation points.
Axial first (by segment): the order is radial machining first, then the axial machining, and all the levels of the current couple of relimitation points are machined before the going to the next couple of relimitation points.
Version 5 Release 14
Page 219
Radial first (by level): the order is axial machining first, then the radial machining, and all the machining is done level by level.
Axial first (by level): the order is radial machining first, then the axial machining, and all the machining is done level by level.
Maximum discretization step Ensures linearity between points that are far apart. Maximum discretization angle Specifies the maximum angular change of tool axis between tool positions. It is used to add more tool positions (points and axis) if value is exceeded. The Maximum discretization step and Maximum discretization angle influence the number of points on the tool path. The values should be chosen carefully if you want to avoid having a high concentration of points along the tool trajectory. These parameters also apply to macro paths that are defined in machining feedrate. They do not apply to macro paths that do not have machining feedrate (RAPID, Approach, Retract, User, and so on). Default value for Maximum discretization step is 100 m. Default value for Maximum discretization angle is 180 degrees.
Version 5 Release 14
Page 220
Type of contouring Indicates whether the contouring type of corners is: q Circular: the tool pivots around the corner point, following a contour whose radius is equal to the tool radius
q
Angular: the tool does not remain in contact with the corner point, following a contour comprised of two line segments Optimized: the tool follows a contour derived from the corner that is continuous in tangent Forced circular: the tool follows a near-circular contour comprised of line segments.
Forced contour Specifies whether the contour is to be forced open or closed. Closed contour overlap Specifies the percentage of overlap on the closed contour.
Distance between paths Defines the maximum distance between two consecutive tool paths in a radial strategy. Number of paths Defines the number of tool paths in a radial strategy.
Version 5 Release 14
Page 221
Maximum cut depth This parameter is used in Contact or in Between 2 curves modes when no auxiliary curve has been defined. Defines the maximum depth of cut in an axial strategy. Number of levels Defines the number of levels to be machined in an axial strategy.
Version 5 Release 14
Page 222
Indicates whether or not finish passes are to be generated on the sides and bottom of the area to machine. Side finishing can be done at each level or only at the last level of the operation. Side finish thickness Specifies the thickness used for side finishing. Side finish thickness on bottom Specifies the thickness used for the last side finish pass at the end of the operation. Bottom finish thickness Specifies the thickness used for bottom finishing. Bottom finish path style Defines the bottom finish path style: Zig zag or One way. Spring pass Indicates whether or not a spring pass is to be generated on the sides in the same condition as the previous Side finish pass. The spring pass is used to compensate the natural `spring' of the tool.
Specifies how the tool axis is to be guided. Below you will find the explanations of the various Guidance types and tool axis modes, then the explanations of the associated parameters. (Only Tool Axis Parameters tabs containing parameters have been captured)
Version 5 Release 14
Page 223
For Contact machining, the tool axis is normal to the part surface with respect to a given lead angle in the forward tool motion and with respect to a given tilt angle in the perpendicular direction to this forward motion. For Tip and Side machining, the tool axis is normal to the guides with respect to a given lead angle in the forward tool motion and with respect to a given tilt angle in the perpendicular direction to this forward motion.
Version 5 Release 14
Page 224
Fixed lead and tilt: Here both the lead and tilt angles are constant.
Variable lead and fixed tilt: Here the tool axis is allowed to move from the specified lead angle within a specified range, the tilt angle remaining constant.
Fixed lead and variable tilt: Here the tool axis is allowed to move from the specified tilt angle within a specified range, the lead angle remaining constant.
The purpose of the variable modes is to avoid collisions between the part to machine and the tool.
Version 5 Release 14
Page 225
Fixed Axis
Interpolation
Version 5 Release 14
Page 226
Thru a Point
Version 5 Release 14
Page 227
The tool axis passes through a specified point. The tool axis can be oriented to point To or From the point.
Normal to Line
The tool axis passes through a specified curve, and is normal to this curve at all points. The tool axis can be oriented to point To or From the line.
4-Axis Lead/Lag
Version 5 Release 14
Page 228
The tool axis is normal to the part surface with respect to a given lead angle in the forward direction and constrained to a specified plane.
The tool axis is computed like in Lead and Tilt mode and then projected into the constraint plane.
Version 5 Release 14
Page 229
Optimized Lead
For Contact machining only. The tool axis is allowed to vary from the specified lead angle within an allowed range. The allowed range is defined by Minimum and Maximum lead angles. The back of the cutter is to be kept clear of the part by means of a Minimum heel distance.
Version 5 Release 14
Page 230
lead defined as minimum to fit the part curvature lead increases if necessary to respect the Minimum heel distance.
If the required lead is outside the allowed range, the tool position will not be kept in the tool path. The maximum material removal is obtained when the tool curvature along the trajectory matches the part curvature.
Tangent Axis
Tangent axis guidance is available for Between 2 Curves and Between curve and part machining modes only. Note that a cylindrical tool should be used.
Version 5 Release 14
Page 231
Along ruling direction Dedicated to milling walls made of a set (strip) of ruled and developable surfaces (possibly with some planar ones), by mapping the tool axis to the ruling direction of the drive surfaces. Maximum material removal is obtained when ruling direction on drive surface matches the ruling direction on tool.
Along isoparametric lines Recommended when the drive surfaces are ruled (even if not developable), ruling directions are the isoparametric lines of the surfaces. The tool axis is mapped to the isoparametric lines (the one which is least parallel to the drive curve). This is done even if the surface is planar, or it is not developable.
When machining a strip (or band) of drive surfaces, the best matching u or v isoparametric line of the first machined face is deduced from the reference tool axis. For the next machined face, the program analyzes the zone near the adjacent faces, and chooses the isoparametric line that assures best continuity of the trajectory. Machining continues in this way in the order of the faces in the strip. If several drives surfaces are selected they must be in a continuous strip or band (that is, one after the other). This behavior is available for operations created as from Release 12.
Version 5 Release 14
Page 232
When two consecutive drive surfaces do not have parallel isoparametric lines, this creates an unwanted tool axis variation.
To avoid this, you can define a Fanning distance that will be applied before and after the seam of the two drive surfaces. Within this fanning distance, the tool will remain tangent to the drive contour and the tool axis will be interpolated :
In some cases, when fanning is applied to two areas that are very close to each other, those two areas are merged into a single area.
Version 5 Release 14
Page 233
Normal to drive curve Recommended when the isoparametric lines of the drive surfaces are not compatible with the NC machine travel limits. This may lead to collision with the machine head or loops in the tool path. In these cases, the user wants the tool axis to be tangent to the drive surface, and normal to the drive curve.
For Along isoparametric lines and Normal to drive curve Tangent Axis guidance, because the tool axis is not always the ruling direction of a developable surface, some undercuts or overcuts may occur. In this case, the maximum and minimum deviations to the drive surfaces are displayed at the end of the computation.
Lead angle Specifies a user-defined incline of the tool axis in a plane defined by the direction of motion and the normal to the part surface. The lead angle is with respect to the part surface normal. Maximum lead angle Specifies a maximum lead angle. Minimum lead angle Specifies a minimum lead angle. Allowed lead Specifies the range of allowed lead variation (available when the tool axis is guided in Tangent Axis along a ruling direction). Tilt angle Specifies a user-defined incline of the tool axis in a plane normal to the direction of motion. The tilt angle is with respect to the part surface normal. Allowed tilt Specifies the range of allowed tilt variation. Minimum heel distance Allows the back of the cutter to be kept clear of the part (for example, when machining a smooth concave ruled part with Optimized Lead tool axis guidance). Fanning distance Specifies a distance over which tool fanning takes place (available when the tool axis is guided in Tangent Axis along a ruling direction).
Version 5 Release 14
Page 234
In the Machine Editor, the Compensation tab contains options for: globally defining the 3D contact cutter compensation mode: None/Contact/Tip & Contact imposing the compensation mode to all operations supporting the selected mode whatever the choice defined at machining operation level.
If the options are set as follows, compensation can be managed at machining operation level.
In this case a Compensation tab appears in the Strategy page of the machining operation editor, and the following options are available.
Output type Allows you to manage the generation of Cutter compensation (CUTCOM) instructions in the NC data output: The following options are proposed:
q
3D Contact (G29/CAT3Dxx) The tool contact point will be visualized during tool path replay. Cutter compensation instructions are automatically generated in the NC data output. An approach macro must be defined to allow the compensation to be applied. Example of generated APT source: $$ Start generation of : Multi-Axis Curve Machining.1 FEDRAT/ 1000.0000,MMPM SPINDL/ 70.0000,RPM,CLW CUTCOM/NORMPS
Version 5 Release 14
Page 235
$$ START CUTCOM NORMPS XC, YC, ZC, XN, YN, ZN, I, J, K .../... CUTCOM/OFF $$ END CUTCOM NORMPS XC, YC, ZC, XN, YN, ZN, I, J, K $$ End of generation of : Multi-Axis Curve Machining .1 None Cutter compensation instructions are not automatically generated in the NC data output. However, CUTCOM instructions can be inserted manually. For more information, please refer to How to generate CUTCOM syntaxes provided in the Prismatic Machining User's Guide.
Contact
Tool follows the trajectory defined by the projection of the guiding contour on the part surface while respecting user-defined geometry limitations and machining strategy parameters. You can specify the following Geometry:
q
Part surface with possible Offset on Part. Guiding contour (edges or sketch) with possible Offset on Contour: An axial offset. A Start point and End point with possible Offsets. Fixture or check elements with possible Offset on Check.
Version 5 Release 14
Page 236
Between 2 curves
Tool follows a trajectory defined by the Guide contour and Auxiliary Guide contour while respecting user-defined geometry limitations and machining strategy parameters. You can specify the following Geometry:
q
Guide contour and Auxiliary Guide contour (edges or sketch) with possible global radial Offset on Contour and an Axial Offset on each contour. Start point and End point with possible Offsets Fixture or check elements with possible Offset on Check.
Guide contour is used for positioning the flank of the tool (radial positioning). Auxiliary Guide contour is used for positioning the tool tip along the tool axis (axial positioning). If no Auxiliary Guide contour is specified, the Guide contour is used for positioning both the flank and the tip of the tool.
Version 5 Release 14
Page 237
Tool follows trajectory defined by a top guide curve and bottom surfaces while respecting user-defined geometry limitations and machining strategy parameters. You can specify the following Geometry:
q
Part with possible Offset on Part. Guiding contour (edges or sketch) with possible Offset on Contour: A Start point and End point with possible Offsets. Fixture or check elements with possible Offset on Check. Axial Offset.
The three Curve Machining Modes accept discontinuous contours as guides. Those contours can be selected using the Edge Selection Toolbar. A Guide.x element is displayed for each continuous ordered contour.
Version 5 Release 14
Page 238
The side to mill is shown by the orange arrow. Click on the arrow to inverse this side to mill. The selection order determines the machining sequence of the different contours.
The linking macro is used to link two discontinuous tool path of the same radial path. Otherwise, a straight line is generated.
Once the selection of the guides is validated (i.e. when the dialog box is displayed again), the following contextual menus become available: On a guide in the graphic area:
Version 5 Release 14
Page 239
Remove Element Removes the selected element from the Guide. You can also remove an element by picking it again, after having launched the Edge Selection Toolbar. If the guide is no longer continuous, an other guide is created.
Before
After
Version 5 Release 14
Page 240
You can add elements to a guide by simply picking the element, after having launched the Edge Selection Toolbar. If the element picked is connected to that guide, it is automatically added to that guide. If the element picked is connected to two guides, the element is added and the two guides are merged into one. Remove Guide x Removes the selected guide.
After
After
Connects a guide to another one. Select the original guide, then the item Connect Guide.x in the contextual menu and the target guide.
Before
After
Version 5 Release 14
Page 241
Before
After
Version 5 Release 14
Page 242
Feed reduction is applied to corners along the tool path whose radius is less than the Maximum radius value and whose arc angle is greater than the Minimum angle value. Corners can be angled or rounded. For Multi-Axis Curve Machining, feedrate reduction applies to inside corners for machining or finishing passes. It does not apply for macros or default linking and return motions. If a cornering is defined with a radius of 5mm and the Feedrate reduction in corners set to a lower radius value, the feedrate will not be reduced.
to link two non consecutive paths to access finish and spring passes.
A Return in a Level macro is used in a multi-path operation to link two consecutive paths in a given level. It comprises an approach and a retract path. A Return between Levels macro is used in a multi-level machining operation to go to the next level. It comprises an approach and a retract path. A Return to Finish Pass macro is used in a machining operation to go to the finish pass. It comprises an approach and a retract
Version 5 Release 14
Page 243
A Clearance macro can be used in a machining operation to avoid a fixture, for example.
Version 5 Release 14
Page 244
Collision Checking
This section shows how collision checking is managed in Multi-Axis Curve Machining, Sweeping, Contour Driven and Isoparametric Machining. The Collision Checking parameters are accessed in the Geometry tab page of the operation's dialog box. You will find below information on: q Collisions with Part Elements for all Multi-Axis operations,
q
Collisions with Check Elements for all Multi-Axis operations, Collisions with Drive Elements for Multi-Axis Curve Machining only, Checking for Collisions between Tool and Guide Elements during Macro Motions, for Multi-Axis Curve Machining only
Collision checking can be performed on check and part elements with the tool assembly (that is, the complete shape of the cutter plus its holder) or the cutting part of the tool (red part of following tools):
To save computation time you should use tool assembly only if the geometry to be checked can interfere with the upper part of the cutter.
To activate collision checking on part elements, you must select the Active checkbox. Part accuracy Defines the maximum error to be accepted with respect to the part with its offset. This parameter is set to the
Version 5 Release 14
Page 245
machining tolerance value. It can be only be changed by modifying the machining tolerance. Allowed gouging Defines the maximum cutter interference with the part during "linking passes" (including approach and retract motion). Collision checking with part elements is useful in the following cases:
Concave and non smooth part milled with 0 degree Lead angle. Note that Allowed gouging must be set to a non zero value, otherwise a "Nothing to Mill" message may be issued.
Version 5 Release 14
Page 246
Convex part machined with ball, flat or filleted ended tool or with Fixed or Variable tool axis mode.
Concave part milled with 0 degree Lead angle. A "Nothing to Mill" message may be issued.
Version 5 Release 14
Page 247
Ruled and smooth part with Optimized Lead tool axis mode. Minimum heel distance will keep the back of the cutter clear.
Version 5 Release 14
Page 248
The parameters involved for check elements (such as fixtures) are described below: Check (or Fixture) accuracy Defines the maximum error to be accepted with respect to the fixture with its offset. Setting this parameter to a correct value avoids spending too much computation time to achieve unnecessary precision.
Offset on check Defines theminimum distance between the cutter and the fixture, used to limit the tool path.
Version 5 Release 14
Page 249
Allowed gouging Defines themaximum cutter interference with the fixture during "linking passes" (including approach and retract motion). The illustrationbelow shows return motion with no macro or jump.
The illustrationbelowshows return motion with macro between path and fixture.
Version 5 Release 14
Page 250
Covering mode Available for Multi-axis Sweeping, Contour Driven, Isoparametric Machining: Select this option to optimize air cuts due to collision with the check. In the example below, a Return in Level macro has been defined. The Covering mode is not selected:
Version 5 Release 14 Multi-Axis Surface Machining The Covering mode is selected, the air cut is reduced:
Page 251
You can apply a positive or negative offset on the check, The Covering mode applies to the tool path (in green), not to the macro motions (in red), The Covering mode applies to the whole set of check surfaces defined in the machining operation
Collisions withDriveElements
To activate collision checking onDrive elements, you must select the Active checkbox. Drive Accuracy Defines the maximum error to be accepted with respect to the drive with itsthickness. Allowed gouging
Page 252 Version 5 Release 14 Multi-Axis Surface Machining Defines the maximum cutter interference with the driveduring "linking passes" (including approach and retract motion).
Checking for Collisions between Tool and Guide Elements during Macro Motions
For Multi-Axis Curve Machining.
By default, the macro tool paths are not checked for collisions with guiding elements. If you select Active, all macro tool paths of the operation will be checked for collision with guiding elements.
Version 5 Release 14
Page 253
Methodology
Methodology and conceptual information on the following topics is provided in the Machining Infrastructure User's Guide. Machining Processes Knowledgeware in Machining Processes CATProduct and CATProcess Document Management Design Changes and Associativity Mechanisms Part Operation and Set Up Documents Opposite Hand Machining User Features for Machining Methodology and conceptual information on the following topics is provided in the Prismatic Machining User's Guide. How to Generate CUTCOM Syntaxes Select Hole Design Features for Machining Use Tolerances on Design Features for Machining.
Version 5 Release 14
Page 254
Glossary
A
approach macro auxiliary command Motion defined for approaching the operation start point A control function such as tool change or machine table rotation. These commands may be interpreted by a specific post-processor. axial machining operation Operation in which machining is done along a single axis and is mainly intended for hole making (drilling, counter boring, and so on).
B
back and forth Between Contours mode bottom plane Machining in which motion is done alternately in one direction then the other. Compare with one way. Machining mode of a Contour Driven operation in which the tool follows a Zig zag or One way trajectory between two user defined curves. A planar geometric element that represents the bottom surface of an area to machine. It is normal to the tool axis.
C
clearance macro climb milling Motion that involves retracting to a safety plane, a linear trajectory in that plane and then plunging from that plane. Milling in which the advancing tool rotates down into the material. Chips of cut material tend to be thrown behind the tool, which results in good surface finish. Compare with conventional milling. Milling in which the advancing tool rotates up into the material. Chips of cut material tend to be carried around with the tool, which often impairs good surface finish. Compare with climb milling.
conventional milling
D
DPM Digital Process for Manufacturing.
E
extension type Defines the end type of a hole as being through hole or blind.
F
Fault feedrate fixture Types of faults in material removal simulation are gouge, undercut, and tool clash. Rate at which a cutter advances into a work piece. Measured in linear or angular units (mm/min or mm/rev, for example). Elements used to secure or support the workpiece on a machine.
Version 5 Release 14
Page 255
G
gouge guiding plane Area where the tool has removed too much material from the workpiece. In sweeping operations, this plane is deduced from the view and starting directions. Machining is done in planes parallel to the guiding plane. The tool contact point is guided by this plane during machining.
H
hard A geometric element (such as a boundary or a bottom face) that the tool cannot pass beyond.
L
lead angle User-defined incline of the tool axis in a plane defined by the direction of motion and the normal to the part surface. The tool axis incline is with respect to the part surface normal. Compare with tilt angle. Motion that involves retracting to a safety plane, a linear trajectory in that plane and then plunging from that plane.
linking motion
M
machine rotation An auxiliary command in the program that corresponds to a rotation of the machine table. machining axis system Reference axis system in which coordinates of points of the tool path are given. machining feature A feature instance representing a volume of material to be removed, a machining axis, tolerances, and other technological attributes. These features may be hole type or milling type. machining operation Contains all the necessary information for machining a part of the workpiece using a single tool. Machining tolerance The maximum allowed difference between the theoretical and computed tool path. manufacturing process Defines the sequence of part operations necessary for the complete manufacture of a part. manufacturing program Describes the processing order of the NC entities that are taken into account for tool path computation: machining operations, auxiliary commands and PP instructions. manufacturing view The set of machining features defined in the part operation. Multi-axis Contour Driven A milling operation in which the tool is driven along a contour while respecting user-defined geometric limitations and machining strategy parameters. Three machining modes are Parallel Contours, Between Contours and Spine Contour. A number of tool axis guidance modes are available. Multi-axis Curve MachiningA milling operation in which the tool's side, tip or contact point is driven along a curve while respecting user-defined geometric limitations and machining strategy parameters. A number of tool axis guidance modes are available. Multi-axis Sweeping A milling operation in which the tool path is executed in parallel planes while respecting user-defined geometric limitations and machining strategy parameters. A number of tool axis guidance modes are available. multi-level operation Milling operation (such as Pocketing or Profile Contouring) that is done in a series of axial cuts.
Version 5 Release 14
Page 256
O
offset Specifies a virtual displacement of a reference geometric element in an operation (such as the offset on the bottom plane of a pocket, for example). Compare with thickness. Machining in which motion is always done in the same direction. Compare with zig zag or back and forth.
one way
P
Parallel Contours mode part operation PP instruction PPR Machining mode of a Contour Driven operation in which the tool follows a Zig zag or One way trajectory that is offset from a user-defined guide curve. Links all the operations necessary for machining a part based on a unique part registration on a machine. The part operation links these operations with the associated fixture and set-up entities. Instructions that control certain functions that are auxiliary to the tool-part relationship. They may be interpreted by a specific post processor. Process Product Resources.
R
retract macro return macro Motion defined for retracting from the operation end point Motion for linking between paths or between levels. It involves retracting to a safety plane, a linear trajectory in that plane and then plunging from that plane.
S
safety plane set up soft spindle speed Spine Contour mode start direction stock A plane normal to the tool axis in which the tool tip can move or remain a clearance distance away from the workpiece, fixture or machine. Describes how the part, stock and fixture are positioned on the machine. A geometric element (such as a boundary or a bottom face) that the tool can pass beyond. The angular speed of the machine spindle. Measured in linear or angular units (m/min or rev/min, for example). Machining mode of a Contour Driven operation in which the tool follows a Zig zag or One way trajectory that is perpendicular to a user-defined spine curve. Specifies the direction in which machining will start. Workpiece prior to machining by the operations of a part operation.
T
thickness tilt angle Specifies a thickness of material to be removed by machining. Compare with offset. User-defined incline of the tool axis in a plane normal to the direction of motion. The tool axis incline is with respect to the part surface normal. Compare with lead angle. A planar geometric element that represents the top surface of an area to machine. It is always normal to the associated tool's rotational axis. Center line of the cutter. An auxiliary command in the program that corresponds to a change of tool. Area where the tool collided with the workpiece during a rapid move.
Version 5 Release 14
Page 257
The path that the center of the tool tip follows during a machining operation. The total depth including breakthrough distance that is machined in a hole making operation.
U
undercut Area where the tool has left material behind on the workpiece.
V
View direction Specifies the direction from which the part is viewed for relimiting and machining.
Z
zig zag Machining in which motion is done alternately in one direction then the other. Compare with one way.
Version 5 Release 14
Page 258
Index
Numerics
4-Axis Constraint arrow (N) 4-Axis Lead/Lag Multi-Axis Contour Driven tool axis guidance Multi-Axis Curve Machining tool axis guidance Multi-Axis Isoparametric Machining tool axis guidance Multi-Axis Sweeping tool axis guidance 4-Axis Tilt Multi-Axis Isoparametric Machining tool axis guidance
A
Allowed gouging, check Allowed gouging, part Allowed lead Multi-Axis Curve Machining parameter Allowed tilt Multi-Axis Contour Driven parameter Multi-Axis Curve Machining parameter Multi-Axis Isoparametric Machining parameter Multi-Axis Sweeping parameter Along isoparametric lines Multi-Axis Curve Machining parameter Along ruling direction Multi-Axis Curve Machining parameter APT import APT source generation auxiliary command Auxiliary operation COPY Operator
Version 5 Release 14
Page 259
Copy Transformation Machine Rotation Machining Axis Change PP Instruction Tool Change TRACUT Operator axial machining operation Axial Parameters Multi-Axis Curve Machining
B
back and forth Between 2 curves Multi-Axis Curve Machining Multi-Axis Curve Machining mode Between a Curve and Surfaces Multi-Axis Curve Machining Between Contours Multi-Axis Contour Driven guiding strategy Between curve and part Multi-Axis Curve Machining mode Bottom finish path style Multi-Axis Curve Machining parameter Bottom finish thickness Multi-Axis Curve Machining parameter
C
CGR file generation Clfile code generation climb milling Closed contour overlap
Version 5 Release 14
Page 260
Multi-Axis Curve Machining parameter Collision checking on check elements Collision checking on part elements command Isoparametric Machining Multi-Axis Contour Driven Multi-Axis Curve Machining Multi-Axis Sweeping Contact Multi-Axis Curve Machining mode conventional milling COPY Operator Copy Transformation Instruction Covering mode Isoparametric Machining Cutter Compensation Parameters Multi-Axis Contour Driven Multi-Axis Curve Machining Multi-Axis Isoparametric Machining Multi-Axis Sweeping
D
Direction of cut Multi-Axis Curve Machining parameter Distance before corner (feed reduction) Distance between paths Multi-Axis Contour Driven parameter Multi-Axis Curve Machining parameter Multi-Axis Sweeping parameter Documentation generation
Version 5 Release 14
Page 261
E
End extension Multi-Axis Isoparametric Machining
F
Fanning distance Multi-Axis Curve Machining Multi-Axis Curve Machining parameter Fault Feedrate reduction in corners Multi-Axis Curve Machining parameter Feeds and Speeds Multi-Axis Contour Driven Multi-Axis Curve Machining Multi-Axis Isoparametric Machining Finishing mode Multi-Axis Curve Machining parameter Finishing Parameters Multi-Axis Curve Machining Fixed Multi-Axis Contour Driven tool axis guidance Multi-Axis Curve Machining tool axis guidance Multi-Axis Isoparametric Machining tool axis guidance Multi-Axis Sweeping tool axis guidance Fixed lead and tilt Multi-Axis Contour Driven tool axis guidance Multi-Axis Curve Machining tool axis guidance Multi-Axis Isoparametric Machining tool axis guidance Multi-Axis Sweeping tool axis guidance Fixed lead and variable tilt Multi-Axis Contour Driven tool axis guidance Multi-Axis Curve Machining tool axis guidance Multi-Axis Isoparametric Machining tool axis guidance
Version 5 Release 14
Page 262
G
Geometry Multi-Axis Contour Driven Multi-Axis Curve Machining Multi-Axis Isoparametric Machining gouge guiding plane
H
hard geometric element
I
Interpolation Multi-Axis Curve Machining tool axis guidance Multi-Axis Isoparametric Machining tool axis guidance Isoparametric Machining Covering mode Isoparametric Machining command
L
Lead and Tilt Multi-Axis Contour Driven tool axis guidance Multi-Axis Curve Machining tool axis guidance
Version 5 Release 14
Page 263
Multi-Axis Isoparametric Machining tool axis guidance Multi-Axis Sweeping tool axis guidance Lead angle Multi-Axis Contour Driven parameter Multi-Axis Curve Machining parameter Multi-Axis Isoparametric Machining parameter Multi-Axis Sweeping parameter
M
Machine Rotation Machining Axis Change machining axis system machining feature machining operation Machining Parameters Multi-Axis Contour Driven Multi-Axis Curve Machining Multi-Axis Isoparametric Machining Multi-Axis Sweeping Machining Process, Apply Machining Process, Create Machining tolerance Multi-Axis Contour Driven parameter Multi-Axis Curve Machining parameter Multi-Axis Isoparametric Machining parameter Multi-Axis Sweeping parameter machining tolerance Manufacturing Process Manufacturing Program Manufacturing View Maximum depth of cut
Version 5 Release 14
Page 264
Multi-Axis Curve Machining parameter Maximum discretization angle Multi-Axis Contour Driven parameter Multi-Axis Curve Machining parameter Multi-Axis Isoparametric Machining parameter Multi-Axis Sweeping parameter Maximum discretization step Multi-Axis Contour Driven parameter Multi-Axis Curve Machining parameter Multi-Axis Isoparametric Machining parameter Multi-Axis Sweeping parameter Maximum lead angle Multi-Axis Contour Driven parameter Multi-Axis Curve Machining parameter Multi-Axis Isoparametric Machining parameter Multi-Axis Sweeping parameter Maximum radius (feed reduction) Maximum width to machine Multi-Axis Contour Driven parameter Minimum angle (feed reduction) Minimum heel distance Multi-Axis Contour Driven parameter Multi-Axis Curve Machining parameter Multi-Axis Isoparametric Machining parameter Multi-Axis Sweeping parameter Minimum heel distance, collision check Minimum lead angle Multi-Axis Contour Driven parameter Multi-Axis Curve Machining parameter Multi-Axis Isoparametric Machining parameter Multi-Axis Sweeping parameter Minimum path length Multi-Axis Contour Driven parameter Multi-Axis Sweeping parameter
Version 5 Release 14
Page 265
Multi-Axis Contour Driven Cutter Compensation Parameters Feeds and Speeds Geometry Machining Parameters NC Macros Radial Parameters Strategy Parameters Tool Axis Parameters Tools Multi-Axis Contour Driven command Multi-Axis Contour Driven guiding strategy Between Contours Parallel Contours Spine Contour Multi-Axis Contour Driven operation Multi-Axis Contour Driven parameter Allowed tilt Distance between paths Lead angle Machining tolerance Maximum discretization angle Maximum discretization step Maximum lead angle Maximum width to machine Minimum heel distance Minimum lead angle Minimum path length Number of paths Output type Radial strategy mode Scallop height
Version 5 Release 14
Page 266
Stepover direction Stepover side Tilt angle Tool axis guidance Tool path style Multi-Axis Contour Driven tool axis guidance 4-Axis Lead/Lag Fixed Fixed lead and tilt Fixed lead and variable tilt Lead and Tilt Normal to Line Optimized Lead Thru a Point Variable lead and fixed tilt Multi-Axis Contour-driven Offset on contour Multi-Axis Curve Machining Axial Parameters Between 2 curves Between a Curve and Surfaces Cutter Compensation Parameters Fanning distance Feeds and Speeds Finishing Parameters Geometry Machining Parameters NC Macros Radial Parameters Sequencing Tool Axis Parameters Tools
Version 5 Release 14
Page 267
Multi-Axis Curve Machining command Multi-Axis Curve Machining mode Between 2 curves Between curve and part Contact Multi-Axis Curve Machining operation Multi-Axis Curve Machining parameter Allowed lead Allowed tilt Along isoparametric lines Along ruling direction Bottom finish path style Bottom finish thickness Closed contour overlap Direction of cut Distance between paths Fanning distance Feedrate reduction in corners Finishing mode Forced contour Lead angle Machining tolerance Maximum depth of cut Maximum discretization angle Maximum discretization step Maximum lead angle Minimum heel distance Minimum lead angle Normal to drive curve Number of levels Number of paths Output type
Version 5 Release 14
Page 268
Side finish thickness Side finish thickness on bottom Spring pass Tilt angle Tool axis guidance Tool path style Type of contouring Multi-Axis Curve Machining tool axis guidance 4-Axis Lead/Lag Fixed Fixed lead and tilt Fixed lead and variable tilt Interpolation Lead and Tilt Normal to Line Optimized Lead Tangent Axis Thru a Point Variable lead and fixed tilt Multi-Axis Isoparametric Machining Cutter Compensation Parameters End extension Feeds and Speeds Geometry Machining Parameters NC Macros Radial Parameters Skip path Start extension Stepover Tool Axis Parameters Tools
Version 5 Release 14
Page 269
Multi-Axis Isoparametric Machining operation Multi-Axis Isoparametric Machining parameter Allowed tilt Lead angle Machining tolerance Maximum discretization angle Maximum discretization step Maximum lead angle Minimum heel distance Minimum lead angle Output type Tilt angle Tool axis guidance Tool path style Multi-Axis Isoparametric Machining tool axis guidance 4-Axis Lead/Lag 4-Axis Tilt Fixed Fixed lead and tilt Fixed lead and variable tilt Interpolation Lead and Tilt Normal to Line Optimized Lead Thru a Point Variable lead and fixed tilt Multi-Axis Sweeping Cutter Compensation Parameters Machining Parameters Radial Parameters Radial strategy Tool Axis Parameters
Version 5 Release 14
Page 270
Multi-Axis Sweeping command Multi-Axis Sweeping operation Multi-Axis Sweeping parameter Allowed tilt Distance between paths Lead angle Machining tolerance Maximum discretization angle Maximum discretization step Maximum lead angle Minimum heel distance Minimum lead angle Minimum path length Number of paths Output type Radial strategy mode Scallop height Stepover side Tilt angle Tool axis guidance Tool path style Multi-Axis Sweeping tool axis guidance 4-Axis Lead/Lag Fixed Fixed lead and tilt Lead and Tilt Normal to Line Optimized Lead Thru a Point
Version 5 Release 14
Page 271
NC code generation NC Macros Multi-Axis Contour Driven Multi-Axis Curve Machining Multi-Axis Isoparametric Machining Normal to drive curve Multi-Axis Curve Machining parameter Normal to Line Multi-Axis Contour Driven tool axis guidance Multi-Axis Curve Machining tool axis guidance Multi-Axis Isoparametric Machining tool axis guidance Multi-Axis Sweeping tool axis guidance Number of levels Multi-Axis Curve Machining parameter Number of paths Multi-Axis Contour Driven parameter Multi-Axis Curve Machining parameter Multi-Axis Sweeping parameter
O
offset Offset on check Offset on contour Multi-Axis Contour-driven one way Optimized Lead Multi-Axis Contour Driven tool axis guidance Multi-Axis Curve Machining tool axis guidance Multi-Axis Isoparametric Machining tool axis guidance Multi-Axis Sweeping tool axis guidance Output type Multi-Axis Contour Driven parameter Multi-Axis Curve Machining parameter
Version 5 Release 14
Page 272
Multi-Axis Isoparametric Machining parameter Multi-Axis Sweeping parameter Overall Machining Direction arrow (M)
P
Parallel Contours Multi-Axis Contour Driven guiding strategy Part Operation PP Instruction PPR Process List Product List
R
Radial Parameters Multi-Axis Contour Driven Multi-Axis Curve Machining Multi-Axis Isoparametric Machining Multi-Axis Sweeping Radial strategy Multi-Axis Sweeping Radial strategy mode Multi-Axis Contour Driven parameter Multi-Axis Sweeping parameter Reduction rate (feed reduction) Resources List
S
Scallop height
Version 5 Release 14
Page 273
Multi-Axis Contour Driven parameter Multi-Axis Sweeping parameter Sequencing Multi-Axis Curve Machining Side finish thickness Multi-Axis Curve Machining parameter Side finish thickness on bottom Multi-Axis Curve Machining parameter Simulate material removal Skip path Multi-Axis Isoparametric Machining soft geometric element Spine Contour Multi-Axis Contour Driven guiding strategy Spring pass Multi-Axis Curve Machining parameter start direction Start Direction arrow (S) Start extension Multi-Axis Isoparametric Machining Stepover Multi-Axis Isoparametric Machining Stepover direction Multi-Axis Contour Driven parameter Stepover side Multi-Axis Contour Driven parameter Multi-Axis Sweeping parameter Strategy Parameters Multi-Axis Contour Driven
T
Tangent Axis Multi-Axis Curve Machining tool axis guidance thickness
Version 5 Release 14
Page 274
Thru a Point Multi-Axis Contour Driven tool axis guidance Multi-Axis Curve Machining tool axis guidance Multi-Axis Isoparametric Machining tool axis guidance Multi-Axis Sweeping tool axis guidance Tilt angle Multi-Axis Contour Driven parameter Multi-Axis Curve Machining parameter Multi-Axis Isoparametric Machining parameter Multi-Axis Sweeping parameter Tool Axis arrow (A) Tool axis guidance Multi-Axis Contour Driven parameter Multi-Axis Curve Machining parameter Multi-Axis Isoparametric Machining parameter Multi-Axis Sweeping parameter Tool Axis Parameters Multi-Axis Contour Driven Multi-Axis Curve Machining Multi-Axis Isoparametric Machining Multi-Axis Sweeping Tool Change tool clash Tool path replay Tool path style Multi-Axis Contour Driven parameter Multi-Axis Curve Machining parameter Multi-Axis Isoparametric Machining parameter Multi-Axis Sweeping parameter Tools Multi-Axis Contour Driven Multi-Axis Curve Machining Multi-Axis Isoparametric Machining Tools Options - Machining
Version 5 Release 14
Page 275
General Operation Output Photo/Video Program Resources TRACUT Operator Type of contouring Multi-Axis Curve Machining parameter
U
undercut
V
Variable lead and fixed tilt Multi-Axis Contour Driven tool axis guidance Multi-Axis Curve Machining tool axis guidance Multi-Axis Isoparametric Machining tool axis guidance view direction View Direction arrow (V)
Z
zig zag