Professional Documents
Culture Documents
Do not use the browser Back button or close or reload any Exam windows during the exam. Do not close Packet Tracer when you are done. It will close automatically. Click the Submit Assessment button to submit your work.
Introduction
In this practice Packet Tracer Skills Exam you will: finish the configuration of a partially configured network establish connectivity between the routers and from the routers to the Internet configure DHCP configure port security configure PPP encapsulation on WAN links verify connectivity to the Internet
Addressing Table
Device
Interface Fa0/0
Subnet Mask
255.255.255.22 4 255.255.255.22 4 255.255.255.22 4 255.255.255.22 4 255.255.255.25 2 255.255.255.22 4 255.255.255.22 4 255.255.255.22 4 255.255.255.22 4 DHCP DHCP
Branch
HQ
Wireless AP
Switch1 PC - C PC - A PC - B
VLAN 1
192.168.20.66 192.168.20.126
192.168.20.65 192.168.20.97
DHCP DHCP
DHCP DHCP
DHCP DHCP
Note: The password for user EXEC mode is cisco. The password for privileged EXEC mode isclass.
Enable Telnet and console line login using the following password:
line vty 0 4 password cisco transport input telnet Line console 0 password cisco Login
Configure the banner message-of-the-day as banner motd Unauthorized access will be prosecuted Enter TEXT message. End with the character ')'. Authorized access only!
192.168.20.62
192.168.20.33 b. Configure Switch1 Addressing. Configure the default management interface on Switch1 with the second available IP address in the Router1 LAN subnet.
dns 192.0.2.5
b. Use the command prompt to verify that PC1 and PC2 have received legal IP addressing. Ipconfig /release Ipconfig /renew
b. Configure Router1 and Router2 with a default route to the Internet. Use the outbound interface argument in your commands. HQ#conf t int s0/0/0 ip route 0.0.0.0 0.0.0.0 s0/0/0 Branch#conf t int s0/0/0 ip route 0.0.0.0 0.0.0.0 s0/0/0
c. Configure Router1 and Router2 to share routing information for internal networks only. Use RIPv2. d. Verify connectivity.
Encapsulation ppp
b. Configure both sides of the link between Router1 and Router2 with PPP. HQ# Int s0/0/0
Encapsulation ppp
HQ# conf t Int s0/0/1
Encapsulation ppp