Professional Documents
Culture Documents
DOC0556A
Page 1
1000 litre IBC heater(several models) 1500W or 3000W - 230V Gripping belt fastening
Page 2
IC type
BS type
CU type
BK type
Page 3
washable and watertight (IP54), can be used outside can be used in food and cosmetics industries (stainless eyelets) built-in thermostat : from +10C to +70 C. homogeneous temperature (spreading effect of the aluminium foil) limited heat waste (fully insulated) Fast setting with elastic fastenings 2m length main supply cable Electrical safety with earth lead
Technical data
Elastic fastenings Aluminium foil Heating cable Insulation
Stainless eyelets
Opened
Closed me
Page 4
Built-in thermostat : from +10 to +70 C C. Homogeneous temperature (spreading effect of the alumunium foil) Limited heat waste (fully insulated) Fast setting with hook Electrical safety with earth lead 2m length main supply cable Can be used in food and cosmetics industries (stainless eyelets)
Technical data : Code : B1004402000FT Output 2000 W Voltage 230 V Built-in thermostat +10 / +70 C C Main supply cable 3x1,5 L 2m Heating face colour rouge Insulated face colour bleu Degree of protection IP54
Bib 230V main supply cable
Insulation
Aluminium foil
Heating cable
Page 5
Advantages :
Heating panels are separate, so easy to handle and easy to be fitted together Thickness and quality of insulation (19mm Armaflex foam) : limit heat losses, make efficient and homogeneous warming up Cover with a hole allows to fill in or empty IBC without taking off the heater Panels are washable and watertight
Technical data :
Output voltage 3x1,5 main supply cable length Outside dimensions available (cm) Heating face colour Insulated face colour Degree of protection Max. maintenance t (turned on) Max. exposure t (turned off) Self heat protection
1500W & 3000W 230 V 2m 105x125 h=115 100x125 h=107 red blue IP54 +60 C +80 C +80 C
Page 6
Description
B50 gas bottle wrap on heater is a flexible and watertight heating panel coated with 2 plastic fabrics : an heating red face and an insulated blue face. This gas bottle heater is able to warm up and maintain gas bottle up to 55 max temperature, by C compensating the bottle cooling down due to gas expansion, and thus to avoid the pressure fall which prevents gas from flowing out the bottle. Heater has 2 heating sections which are regulated separately : 1 upper section and 1 lower section ; as a result, these 2 different sections allow to compensate heat losses of the bottle according to its filling level : this is a safe and ready to use device. It is built with stainless eyelets and elastic quick fastening on top, and its side fastening with gripping belts allows to keep the flexible heater wrapped closely around the bottle, and so to get a perfect heat exchange between heating panel and gas bottle.
Advantages
B50 gas bottle wrap on heater covers the full cylinder of the bottle, making homogeneous and soft warming up and avoiding over-heating. Thanks to the insulated face, heat losses are greatly lowered.
Technical data
0.73m mm
Output Voltage Main supply cord length Outside dimensions Degree of protection
Upper section
Lower section
Page 7
1x 2m heating jacket
7 Stainless eyelets 7 illets de Fixation
Cble dalimentation (2m) 3x1,5
1m
2m
2x 2m heating jacket
1212 Stainless eyelets 1, 2 et 3) illets de Fixation (cts
1 2m 3
2m
insulation
Heating cord
Technical data :
Reference Built-in thermostat Output Voltage 3x1,5 main suply cable length Dimensions Heating face colour Insulated face colour Degree of protection Stainless eyelets
Code
Designation
5 gallon wrap on drum heater Built-in thermostat : from +10C to +70C 155W - 230V 2m main supply cable quick elastic fastening 55 gallon wrap on drum heater Built-in thermostat : from +10C to +70C 575W - 230V 2m main supply cable quick elastic fastening B50 gas bottle heater (max maintenance t = +45C)
diam 22 to 25 cm / Height=145 cm
unit price
B0421030155FT
451
B0851900575FT
674
B0771450400FA
400W - 230V 3m main supply cable gripping fastening 1000 litre IBC heater l 120 w 100 h100cm Built-in thermostat : from +10C to +70C 2000W - 230V 2m main supply cable fastening with hooks & eyelets Isothermal lid 1000 litre IBC heater (5 panels) l 120 w 100 h 107cm with top opening 4 x 750W = 3000 W - 230V 4 x 4m main supply cable gripping fastening
662
Lid
Thermostat
B1004402000FT
1 998
Bib
Power supply
COUV_100X120
249
C1000B
2746
1000 litre IBC heater (5 panels) l 100 w 120 h107cm with top opening C1000D 2 x 750W = 1500 W - 230V 4 x 4m main supply cable gripping fastening 1 x 1m flexible panel Built-in thermostat : from +10C to +70C B1001000400FT 400W - 230V 2m main supply cable fastening with eyelets 1 x 2m flexible panel Built-in thermostat : from +10C to +70C 800W - 230V 2m main supply cable fastening with eyelets 2 x 2m flexible panel Built-in thermostat : from +10C to +70C 1600W - 230V 2m main supply cable fastening with eyelets
2138
544
B1002000800FT
858
B2002001600FT
1 338
Page 9
Applications:
-
Freeze protection: pumps, bulks, tanks, Snow protection: sand, gravel, cement, Heating up and temperature maintenance: fluidification of fat, pasty, viscous, gluey
materials such as soda, grease, paint, varnish, mastic, chocolate, toffee, chemicals, cosmetics and so on Drying and polymerization: resins, glues, composites, concrete, Condensation protection: electric engines, transformers, hoop-iron rolls, power station rotors and so on
Technical characteristics:
Max. voltage : Max. load : Min. dimensions : Max. dimensions : Max. temperature maintenance : 500V 750W/m 400mm 5.000mm +10 / +70 (+50 / +158 C C F F)
Examples of applications:
Chocolate valve Toffee container Cosmetics hopper Oil tank Resin drum
IR missile butt
Condensation protection
Page 10
Picture
Drawing Outdoors
Condensation protection Minimum atmosphere temperature Maintenance temperature Heating up temperature Temperature rise duration Mass of contents to heat up Specific heat capacity Mass of container to heat up Specific heat capacity Plastic Metal 3- Voltage: 230 V other V or C F or C F or C F h kg J/kg.K kg J/kg.K
4- Optional heating jacket characteristics: Without thermostat With adjustable +10 / +70 thermostat C C Fastening with Velcro Fastening with eyelets and sandows Temperature sensor sheath Built-in heat protector Main supply cable length 5- Quantities: Prototype Pre-production Mass-production or C F m piece(s) pieces pieces
Page 11
Heating tape
The built-in thermostat modulary tape is a ready for use heating tape: installation without tool makes a 40% time saving compared with a self-limiting tape installation.
Applications : - Freeze protection of pipes, especially fire safety networks, - Cold room door framing cord, - Showcase demisting cord, - Condensate out-flowing drain bands. Advantages : - Can be cut on site, at length without wasting. - Small section : 8 x 5.5mm
Page 12
RMB
STANDARD REFERENCES
L (m) 21,6 10,8 8,1 5,4 4,0 2,7 1,0 7W/m 230V RMB07/21,6 -----------------RMB/07/08,1 -----------------RMB07/04,0 RMB07/02,7 RMB07/01,0 14W/m 230V RMB14/21,6 RMB14/10,8 RMB14/08,1 RMB14/05,4 RMB14/04,0 RMB14/02,7 RMB14/01,0
Terms of payment : T/T transfer before shipment 28W/m 230V ---------------RMB28/10,8 RMB28/08,1 RMB28/05,4 RMB28/04,0 RMB28/02,7 RMB28/01,0
The first 2 figures of the reference are linear output, the 3 following ones are the tape length.
INSTALLING ACCESSORIES
Designation
11.45
ALM
23.45
BOU
1.03
CRX
Cross plug for additional pipes (2 watertight end caps included) Signalling adhesive labels (bag of 25 pieces)
22.15
EDS
5.16
PLG
26.23
TEC
T plug side plugging for additional pipe (watertight end cap included) T plug middle plugging for additional pipe (watertight end cap included) Modulary thermostat 3A-250V xx = 05, 35, 45, 55, 60 or 65 C
16.58
TEM
16.58
Txx
15
Page 13
SELF-LIMITING TAPE
TERMS OF PAYMENT: T/T before shipment
RAG
RAG15
Unit price per meter (delivered with 100m wheel) 230V 15W/m at +10 self-limiting tape C Unit price per meter (delivered with 100m wheel) 230V 20W/m at +10 self-limiting tape C Unit price per meter (cut at length) 230V self-limiting tape 20W/m at +10 9W/m at +55 C C Adhesive aluminium tape 50 mm x 50 m roll Versatile shunt box + 3 connectors
7.48
RAG20
11.22
RAG20W
15.34
AAL
11.45
BDU
12.34
CNX
Set of 4 shrinkle sleeves for 1 RAG connexion 6A - 230V snow & ice controller with a -15 / + 15 temperature sensor C C and a 5m length ice & snow sensor Bag of signalling adhesive labels (25 pieces par bag)
6.56
DEN
666.41
EDS
5.16
5x
KIT/RAG15/2 5 x sets of 3 splices and 6 shrinkable sleeves 0 for 5 main supply cable and 5 tape end connections
23.93
OBT
Set of 5 shrinkable sleeves for tape end 16A 230V temperature controller Setting range: from 0 to +40 C C + 3m length sensor 25A - 230V temperature controller Setting range : from +30 to 90 C C + 3m length sensor
5.35
R40
228.00
R90
315.40
SRU
Versatile tape fastening (bag of 10 pieces) + 2 links 15A 250V - atmosphere temperature controller setting range: from 0 to +60 C C
28.89
THI3A
61.00
Page 14
1- Working document:
2- Pipe :
Outside diameter mm Length m Number of tappings Material : Plastic (max. 15W/m) Metal Tinned steel (max. +45 C) Other
3- Voltage
230 V
Other
V V
4- Maintenance temperature:
or F C
6- Insulation:
Material Thickness
mm
Page 15
Advantages :
3a heating wire flexibility as well as cutting up, shaping and thinness of the aluminium mat allow to suit with any solid contour to be warmed.
Technical characteristics:
insulated face
Tailor made mat (dimensions, voltage and output) Heating wire insulation: high temperature thermoplastic elastomere Max. temperature maintenance without 19mm rubber foam: +110 / +230 C F Max. temperature maintenance with 19mm rubber foam: +85 / +185 C F Voltage : up to 500 V Max. square output: 2000 W /m Min. dimension: 150mm Max. dimension: 2000mm
self-adhesive face
Options:
Self-adhesive face Insulated face with 19mm rubber foam Earth lead
Page 16
4- Optional aluminium mat characteristics: Self-adhesive face Insulated face with 19mm rubber foam Earth lead (with metal eyelet) Built-in heat protector Main supply cable length m or C F m
5- Quantity:
Page 17
Applications: The uses for silicone heating mats are almost infinite as they can suit any application requiring localized surface heating up to +230 ( +446 ): C F - Food industry - Car industry - Pharmaceutics - Chemistry - Cosmetics - Telecommunications - Polymerization of composite resins, etc. Advantages: Custom design (dimensions, voltage and output) Large temperature range: from -60 C(-140 to +230 F) C Water and chemicals resistant Fast setting up: - permanent (adhesive face) - removable (hooks & springs or eyelets & lacing) Flexible Low thickness Light weight Options: Self-adhesive face Built-in heat protector Earthing Strengthened surface Very flexible surface
Thickness: 1 mm
Surface silicone High flexibility grande flexibilit
silicone mat
Page 18
5- Optional silicone mat characteristics: Very flexible Strengthened Adhesive Removable setting Earth lead (with metal eyelet) Built-in heat protector Main supply cable length 6- Quantities: Prototype Pre-production Mass-production or C F m piece(s) pieces pieces Page 19