Professional Documents
Culture Documents
Silverwing (UK) Ltd, Unit 31, Cwmdu Industrial Estate, Carmarthen road, Swansea SA5 8JF UK Tel: +44 (0) 1792 585533 Fax: +44 (0) 1792 586044 e-mail: mfl@silverwinguk.com
Inspection Details
Location Floor Plates Inspection Type MFL UT corrosion sizing Pit gauge corrosion sizing Floor Plate Lap Welds Internal Shell to Annular weld Vacuum Box MPI Visual Internal Shell Plates Nozzle inspection Visual UT thickness measurements Visual Procedure Number MFL/001/06/F UT/002/06 PG/001/06 VB/001/06 MPI/001/06 VT/001/06 VT/001/06 UT/001/06 VT/001/06
MPI
MPI/001/06
External Floor Plate (toe) Inspection UT thickness measurements External Roof Inspection Visual UT thickness measurements External Appurtenances External Attachment welds Visual Visual MPI General Housekeeping Visual UT/002/06 VT/001/06 UT/002/06
Cleanliness Results
Results
Results Cleanliness
Results
Visual
Results
Corrosion, holes and staining from leaked product were noted at several areas on the external surfaces of the shell. With the exception of the above areas, the coating appeared to be in a generally good condition. It should be noted that the width of each B-Scan is approximately 5mm. Areas of severe corrosion resulting in holes were noted on Course 3, Course 4 and Course 5. The External floor plates were clean enough to allow a meaningful inspection to take place. See attached data sheets. Several areas of bubbled or missing paint were noted which has led to Some corrosion lamination at edge of plates. The seal between the pad and the external floor plates has started to break down. The roof was clean enough to allow a meaningful inspection to take place. The coating appeared to be in a good condition. No excessive distortion or corrosion noted on roof plates. See attached data sheets.
Observations
Tank Roof Plates Visual UT thickness measurements External Attachment welds MPI Visual
All attachment welds were clean enough to allow a meaningful inspection to take place. No linear crack type indications were detected during this survey. The welds appeared to be in good condition with no significant undercut, corrosion, cracking or distortion visible. The coating appeared to be in a good condition. All appurtenances were clean enough to allow a meaningful inspection to take place. Severe corrosion was noted on the wind stiffener at several areas. The corrosion appeared to have initiated at the joint between the wind stiffener and wind stiffener retaining brackets (see photographs). With the exception of the Wind-Stiffener the coating to all appurtenances appeared to be in a generally good condition. There were no signs of distress, excessive material flaking, thinning or corrosion staining. See attached data sheets. The tank, bund and surrounding area was found to be in a clean condition.
Cleanliness Results
General Housekeeping
Cleanliness
Photographs Tank 8
Internal Shell
External Wind-Guard
External Shell
Breakdown of seal between external floor plates and concrete pad resulting in minor corrosion to the external floor plates in several areas
Dated
10
MFL Results
The X / Y co-ordinates and the corrosion severity, as confirmed by either ultrasonic inspection or pit gauging, are shown in the attached drawings. Nominal 6mm floor plates. Nominal 8mm annular plates. FloormapVS signals do not discriminate between top and bottom surface originating defects so the results should be viewed as a total floor condition. The FloormapVS inspection detected corrosion signals that were analysed as in excess of 40% loss of the nominal floor thickness.
Floor Thickness
Restrictions
Observations
The results from the magnetic flux leakage (MFL) inspection are presented as follows: Plate Numbering System Rows are numbered from the top downwards relative to the tank datum. Plates are numbered from left to right relative to the tank datum. An image of the tank floor surveyed is shown with each plate colour coded to the maximum material loss detected by the FloormapVS inspection. This drawing is used to quickly identify areas of concern in the tank floor.
Individual Plate Drawings Drawings of plates that have defect indications in excess of 40% loss of the nominal plate thickness have been printed out. The location and severity of any corrosion indication in excess of 40% loss is shown on the attached plate drawings.
Electronic Report
A CD is attached to this report which contains the following information: a) A PDF document containing the written report
b) A compiled .tnk file containing the data files c) FloormapVS Read Only Software
Defect Colour Scheme < 20% 20% - 29% 30% - 39% 40% - 49% 50% - 59% 60% - 69% 70% - 79% 80% - 89% 90% - 100% Weld Defect
Defect Colour Scheme < 20% 20% - 29% 30% - 39% 40% - 49% 50% - 59% 60% - 69% 70% - 79% 80% - 89% 90% - 100% Weld Defect
Defect Colour Scheme < 20% 20% - 29% 30% - 39% 40% - 49% 50% - 59% 60% - 69% 70% - 79% 80% - 89% 90% - 100% Weld Defect
8070 1216 20% - 30% 30% - 40% 40% - 50% 223 50% - 60% 31 60% - 70% 15 70% - 80% 3 80% - 90% 0 90% - 100%
Tank Datum
0mm 0mm
500mm
1000mm
1500mm
2000mm
500mm
1000mm
1500mm
Defect Colour Scheme < 20% 20% - 29% 30% - 39% 40% - 49% 50% - 59% 60% - 69% 70% - 79% 80% - 89% 90% - 100% Weld Defect
Row: Plate Length: Orientation: Max discontinuity: Lower Threshold: Tank: Location: Company: Client: Date:
8 Plate: 1530 Plate Width: Uni-Directional Scan Method: Discontinuity Count: 4 Upper Threshold: 100 Import Threshold:
20%
0mm
500mm
1000mm
1500mm
2000mm
2500mm
3000mm
3500mm
4000mm
4500mm
5000mm
5500mm
6000mm
1500mm
1000mm
500mm
0mm
Tank Datum
Defect Colour Scheme < 20% 20% - 29% 30% - 39% 40% - 49% 50% - 59% 60% - 69% 70% - 79% 80% - 89% 90% - 100% Weld Defect
Row: Plate Length: Orientation: Max discontinuity: Lower Threshold: Tank: Location: Company: Client: Date:
2 Plate: 1620 Plate Width: Raster Scan Method: Discontinuity Count: 1 Upper Threshold: 100
Import Threshold:
20%
0mm
500mm
1000mm
1500mm
2000mm
2500mm
3000mm
3500mm
4000mm
4500mm
5000mm
5500mm
6000mm
1500mm
1000mm
500mm
0mm
Tank Datum
Defect Colour Scheme < 20% 20% - 29% 30% - 39% 40% - 49% 50% - 59% 60% - 69% 70% - 79% 80% - 89% 90% - 100% Weld Defect
Row: Plate Length: Orientation: Max discontinuity: Lower Threshold: Tank: Location: Company: Client: Date:
3 Plate: 1630 Plate Width: Raster Scan Method: Discontinuity Count: 13 Upper Threshold: 100
Import Threshold:
20%
0mm
500mm
1000mm
1500mm
2000mm
2500mm
3000mm
3500mm
4000mm
4500mm
5000mm
5500mm
6000mm
1500mm
1000mm
500mm
0mm
Tank Datum
Defect Colour Scheme < 20% 20% - 29% 30% - 39% 40% - 49% 50% - 59% 60% - 69% 70% - 79% 80% - 89% 90% - 100% Weld Defect
Row: Plate Length: Orientation: Max discontinuity: Lower Threshold: Tank: Location: Company: Client: Date:
5 Plate: 1630 Plate Width: Raster Scan Method: Discontinuity Count: 1 Upper Threshold: 100
Import Threshold:
20%
0mm
500mm
1000mm
1500mm
2000mm
2500mm
3000mm
3500mm
4000mm
4500mm
5000mm
5500mm
6000mm
1500mm
1000mm
500mm
0mm
Tank Datum
Defect Colour Scheme < 20% 20% - 29% 30% - 39% 40% - 49% 50% - 59% 60% - 69% 70% - 79% 80% - 89% 90% - 100% Weld Defect
Row: Plate Length: Orientation: Max discontinuity: Lower Threshold: Tank: Location: Company: Client: Date:
2 Plate: 1640 Plate Width: Raster Scan Method: Discontinuity Count: 4 Upper Threshold: 100
Import Threshold:
20%
0mm
500mm
1000mm
1500mm
2000mm
2500mm
3000mm
3500mm
4000mm
4500mm
5000mm
5500mm
6000mm
1500mm
1000mm
500mm
0mm
Tank Datum
Defect Colour Scheme < 20% 20% - 29% 30% - 39% 40% - 49% 50% - 59% 60% - 69% 70% - 79% 80% - 89% 90% - 100% Weld Defect
Row: Plate Length: Orientation: Max discontinuity: Lower Threshold: Tank: Location: Company: Client: Date:
3 Plate: 1640 Plate Width: Raster Scan Method: Discontinuity Count: 3 Upper Threshold: 100
Import Threshold:
20%
0mm
500mm
1000mm
1500mm
2000mm
2500mm
3000mm
3500mm
4000mm
4500mm
5000mm
5500mm
6000mm
1500mm
1000mm
500mm
0mm
Tank Datum
Defect Colour Scheme < 20% 20% - 29% 30% - 39% 40% - 49% 50% - 59% 60% - 69% 70% - 79% 80% - 89% 90% - 100% Weld Defect
Row: Plate Length: Orientation: Max discontinuity: Lower Threshold: Tank: Location: Company: Client: Date:
5 Plate: 1590 Plate Width: Raster Scan Method: Discontinuity Count: 1 Upper Threshold: 100
Import Threshold:
20%
0mm
500mm
1000mm
1500mm
2000mm
2500mm
3000mm
3500mm
4000mm
4500mm
5000mm
5500mm
6000mm
1500mm
1000mm
500mm
0mm
Tank Datum
Defect Colour Scheme < 20% 20% - 29% 30% - 39% 40% - 49% 50% - 59% 60% - 69% 70% - 79% 80% - 89% 90% - 100% Weld Defect
Row: Plate Length: Orientation: Max discontinuity: Lower Threshold: Tank: Location: Company: Client: Date:
2 Plate: 1640 Plate Width: Uni-Directional Scan Method: Discontinuity Count: 1 Upper Threshold: 100 Import Threshold:
20%
0mm
500mm
1000mm
1500mm
2000mm
2500mm
3000mm
3500mm
4000mm
4500mm
5000mm
5500mm
6000mm
1500mm
1000mm
500mm
0mm
Tank Datum
Defect Colour Scheme < 20% 20% - 29% 30% - 39% 40% - 49% 50% - 59% 60% - 69% 70% - 79% 80% - 89% 90% - 100% Weld Defect
Row: Plate Length: Orientation: Max discontinuity: Lower Threshold: Tank: Location: Company: Client: Date:
3 Plate: 1640 Plate Width: Raster Scan Method: Discontinuity Count: 3 Upper Threshold: 100
Import Threshold:
20%
0mm
500mm
1000mm
1500mm
2000mm
2500mm
3000mm
3500mm
4000mm
4500mm
5000mm
5500mm
1500mm
1000mm
500mm
0mm
Tank Datum
Defect Colour Scheme < 20% 20% - 29% 30% - 39% 40% - 49% 50% - 59% 60% - 69% 70% - 79% 80% - 89% 90% - 100% Weld Defect
Row: Plate Length: Orientation: Max discontinuity: Lower Threshold: Tank: Location: Company: Client: Date:
4 Plate: 1640 Plate Width: Raster Scan Method: Discontinuity Count: 4 Upper Threshold: 100
Import Threshold:
20%
0mm
500mm
1000mm
1500mm
2000mm
2500mm
3000mm
3500mm
4000mm
4500mm
5000mm
5500mm
6000mm
1500mm
1000mm
500mm
0mm
Tank Datum
Defect Colour Scheme < 20% 20% - 29% 30% - 39% 40% - 49% 50% - 59% 60% - 69% 70% - 79% 80% - 89% 90% - 100% Weld Defect
Row: Plate Length: Orientation: Max discontinuity: Lower Threshold: Tank: Location: Company: Client: Date:
6 Plate: 1630 Plate Width: Raster Scan Method: Discontinuity Count: 1 Upper Threshold: 100
Import Threshold:
20%
0mm
500mm
1000mm
1500mm
2000mm
2500mm
3000mm
3500mm
4000mm
4500mm
5000mm
5500mm
6000mm
1500mm
1000mm
500mm
0mm
Tank Datum
Defect Colour Scheme < 20% 20% - 29% 30% - 39% 40% - 49% 50% - 59% 60% - 69% 70% - 79% 80% - 89% 90% - 100% Weld Defect
Row: Plate Length: Orientation: Max discontinuity: Lower Threshold: Tank: Location: Company: Client: Date:
4 Plate: 1630 Plate Width: Raster Scan Method: Discontinuity Count: 5 Upper Threshold: 100
Import Threshold:
20%
0mm
500mm
1000mm
1500mm
2000mm
2500mm
3000mm
3500mm
4000mm
4500mm
5000mm
5500mm
6000mm
1500mm
1000mm
500mm
0mm
Tank Datum
Defect Colour Scheme < 20% 20% - 29% 30% - 39% 40% - 49% 50% - 59% 60% - 69% 70% - 79% 80% - 89% 90% - 100% Weld Defect
Row: Plate Length: Orientation: Max discontinuity: Lower Threshold: Tank: Location: Company: Client: Date:
5 Plate: 1630 Plate Width: Raster Scan Method: Discontinuity Count: 7 Upper Threshold: 100
Import Threshold:
20%
0mm 1500mm
500mm
1000mm
1500mm
2000mm
2500mm
3000mm
3500mm
4000mm
4500mm
5000mm
5500mm
6000mm
1000mm
500mm
0mm
Tank Datum
Defect Colour Scheme < 20% 20% - 29% 30% - 39% 40% - 49% 50% - 59% 60% - 69% 70% - 79% 80% - 89% 90% - 100% Weld Defect
Row: Plate Length: Orientation: Max discontinuity: Lower Threshold: Tank: Location: Company: Client: Date:
4 Plate: 1580 Plate Width: Raster Scan Method: Discontinuity Count: 1 Upper Threshold: 100
Import Threshold:
20%
0mm 1500mm
500mm
1000mm
1500mm
2000mm
2500mm
3000mm
3500mm
4000mm
4500mm
5000mm
5500mm
6000mm
1000mm
500mm
0mm
Tank Datum
Defect Colour Scheme < 20% 20% - 29% 30% - 39% 40% - 49% 50% - 59% 60% - 69% 70% - 79% 80% - 89% 90% - 100% Weld Defect
Row: Plate Length: Orientation: Max discontinuity: Lower Threshold: Tank: Location: Company: Client: Date:
6 Plate: 1580 Plate Width: Uni-Directional Scan Method: Discontinuity Count: 3 Upper Threshold: 100 Import Threshold:
20%
2500mm
2000mm
1500mm
1000mm
500mm
0mm
1500mm
1000mm
500mm
0mm
Tank Datum
Defect Colour Scheme < 20% 20% - 29% 30% - 39% 40% - 49% 50% - 59% 60% - 69% 70% - 79% 80% - 89% 90% - 100% Weld Defect
Row: Plate Length: Orientation: Max discontinuity: Lower Threshold: Tank: Location: Company: Client: Date:
1 Plate: 1610 Plate Width: Uni-Directional Scan Method: Discontinuity Count: 1 Upper Threshold: 100 Import Threshold:
20%
0mm
500mm
1000mm
1500mm
2000mm
2500mm
3000mm
3500mm
4000mm
4500mm
5000mm
5500mm
6000mm
1500mm
1000mm
500mm
0mm
Tank Datum
Defect Colour Scheme < 20% 20% - 29% 30% - 39% 40% - 49% 50% - 59% 60% - 69% 70% - 79% 80% - 89% 90% - 100% Weld Defect
Row: Plate Length: Orientation: Max discontinuity: Lower Threshold: Tank: Location: Company: Client: Date:
2 Plate: 1610 Plate Width: Raster Scan Method: Discontinuity Count: 7 Upper Threshold: 100
Import Threshold:
20%
0mm
500mm
1000mm
1500mm
2000mm
2500mm
3000mm
3500mm
4000mm
4500mm
5000mm
5500mm
6000mm
1500mm
1000mm
500mm
0mm
Tank Datum
Defect Colour Scheme < 20% 20% - 29% 30% - 39% 40% - 49% 50% - 59% 60% - 69% 70% - 79% 80% - 89% 90% - 100% Weld Defect
Row: Plate Length: Orientation: Max discontinuity: Lower Threshold: Tank: Location: Company: Client: Date:
3 Plate: 1610 Plate Width: Raster Scan Method: Discontinuity Count: 1 Upper Threshold: 100
Import Threshold:
20%
0mm
500mm
1000mm
1500mm
2000mm
2500mm
3000mm
3500mm
4000mm
4500mm
5000mm
5500mm
6000mm
1500mm
1000mm
500mm
0mm
Tank Datum
Defect Colour Scheme < 20% 20% - 29% 30% - 39% 40% - 49% 50% - 59% 60% - 69% 70% - 79% 80% - 89% 90% - 100% Weld Defect
Row: Plate Length: Orientation: Max discontinuity: Lower Threshold: Tank: Location: Company: Client: Date:
4 Plate: 1610 Plate Width: Raster Scan Method: Discontinuity Count: 25 Upper Threshold: 100
Import Threshold:
20%
0mm
500mm
1000mm
1500mm
2000mm
2500mm
3000mm
3500mm
4000mm
4500mm
5000mm
5500mm
6000mm
1500mm
1000mm
500mm
0mm
Tank Datum
Defect Colour Scheme < 20% 20% - 29% 30% - 39% 40% - 49% 50% - 59% 60% - 69% 70% - 79% 80% - 89% 90% - 100% Weld Defect
Row: Plate Length: Orientation: Max discontinuity: Lower Threshold: Tank: Location: Company: Client: Date:
5 Plate: 1610 Plate Width: Raster Scan Method: Discontinuity Count: 23 Upper Threshold: 100
Import Threshold:
20%
0mm
500mm
1000mm
1500mm
2000mm
2500mm
1500mm
1000mm
500mm
0mm
Tank Datum
Defect Colour Scheme < 20% 20% - 29% 30% - 39% 40% - 49% 50% - 59% 60% - 69% 70% - 79% 80% - 89% 90% - 100% Weld Defect
Row: Plate Length: Orientation: Max discontinuity: Lower Threshold: Tank: Location: Company: Client: Date:
8 Plate: 1610 Plate Width: Uni-Directional Scan Method: Discontinuity Count: 9 Upper Threshold: 100 Import Threshold:
20%
0mm
500mm
1000mm
1500mm
2000mm
2500mm
3000mm
3500mm
4000mm
4500mm
5000mm
5500mm
6000mm
1500mm
1000mm
500mm
0mm
Tank Datum
Defect Colour Scheme < 20% 20% - 29% 30% - 39% 40% - 49% 50% - 59% 60% - 69% 70% - 79% 80% - 89% 90% - 100% Weld Defect
Row: Plate Length: Orientation: Max discontinuity: Lower Threshold: Tank: Location: Company: Client: Date:
3 Plate: 1630 Plate Width: Raster Scan Method: Discontinuity Count: 6 Upper Threshold: 100
Import Threshold:
20%
0mm
500mm
1000mm
1500mm
2000mm
2500mm
3000mm
3500mm
4000mm
4500mm
5000mm
5500mm
6000mm
1500mm
1000mm
500mm
0mm
Tank Datum
Defect Colour Scheme < 20% 20% - 29% 30% - 39% 40% - 49% 50% - 59% 60% - 69% 70% - 79% 80% - 89% 90% - 100% Weld Defect
Row: Plate Length: Orientation: Max discontinuity: Lower Threshold: Tank: Location: Company: Client: Date:
4 Plate: 1630 Plate Width: Raster Scan Method: Discontinuity Count: 1 Upper Threshold: 100
Import Threshold:
20%
0mm
500mm
1000mm
1500mm
2000mm
2500mm
1500mm
1000mm
500mm
0mm
Tank Datum
Defect Colour Scheme < 20% 20% - 29% 30% - 39% 40% - 49% 50% - 59% 60% - 69% 70% - 79% 80% - 89% 90% - 100% Weld Defect
Row: Plate Length: Orientation: Max discontinuity: Lower Threshold: Tank: Location: Company: Client: Date:
5 Plate: 1630 Plate Width: Raster Scan Method: Discontinuity Count: 31 Upper Threshold: 100
Import Threshold:
20%
0mm
500mm
1000mm
1500mm
2000mm
2500mm
3000mm
3500mm
4000mm
4500mm
5000mm
5500mm
6000mm
1500mm
1000mm
500mm
0mm
Tank Datum
Defect Colour Scheme < 20% 20% - 29% 30% - 39% 40% - 49% 50% - 59% 60% - 69% 70% - 79% 80% - 89% 90% - 100% Weld Defect
Row: Plate Length: Orientation: Max discontinuity: Lower Threshold: Tank: Location: Company: Client: Date:
6 Plate: 1630 Plate Width: Raster Scan Method: Discontinuity Count: 55 Upper Threshold: 100
Import Threshold:
20%
0mm
500mm
1000mm
1500mm
2000mm
2500mm
3000mm
3500mm
4000mm
4500mm
5000mm
5500mm
6000mm
1500mm
1000mm
500mm
0mm
Tank Datum
Defect Colour Scheme < 20% 20% - 29% 30% - 39% 40% - 49% 50% - 59% 60% - 69% 70% - 79% 80% - 89% 90% - 100% Weld Defect
Row: Plate Length: Orientation: Max discontinuity: Lower Threshold: Tank: Location: Company: Client: Date:
2 Plate: 1630 Plate Width: Uni-Directional Scan Method: Discontinuity Count: 7 Upper Threshold: 100 Import Threshold:
20%
0mm
500mm
1000mm
1500mm
2000mm
2500mm
3000mm
3500mm
4000mm
4500mm
5000mm
5500mm
6000mm
1500mm
1000mm
500mm
0mm
Tank Datum
Defect Colour Scheme < 20% 20% - 29% 30% - 39% 40% - 49% 50% - 59% 60% - 69% 70% - 79% 80% - 89% 90% - 100% Weld Defect
Row: Plate Length: Orientation: Max discontinuity: Lower Threshold: Tank: Location: Company: Client: Date:
4 Plate: 1630 Plate Width: Raster Scan Method: Discontinuity Count: 5 Upper Threshold: 100
Import Threshold:
20%
0mm
500mm
1000mm
1500mm
2000mm
2500mm
3000mm
3500mm
4000mm
4500mm
5000mm
5500mm
6000mm
1500mm
1000mm
500mm
0mm
Tank Datum
Defect Colour Scheme < 20% 20% - 29% 30% - 39% 40% - 49% 50% - 59% 60% - 69% 70% - 79% 80% - 89% 90% - 100% Weld Defect
Row: Plate Length: Orientation: Max discontinuity: Lower Threshold: Tank: Location: Company: Client: Date:
5 Plate: 1630 Plate Width: Raster Scan Method: Discontinuity Count: 211 Upper Threshold: 100
Import Threshold:
20%
2000mm
1500mm
1000mm
500mm
0mm
1500mm
1000mm
500mm
Tank Datum
0mm
Defect Colour Scheme < 20% 20% - 29% 30% - 39% 40% - 49% 50% - 59% 60% - 69% 70% - 79% 80% - 89% 90% - 100% Weld Defect
Row: Plate Length: Orientation: Max discontinuity: Lower Threshold: Tank: Location: Company: Client: Date:
1 Plate: 1620 Plate Width: Uni-Directional Scan Method: Discontinuity Count: 42 Upper Threshold: 100 Import Threshold:
20%
0mm
500mm
1000mm
1500mm
2000mm
2500mm
3000mm
3500mm
4000mm
4500mm
5000mm
5500mm
6000mm
1500mm
1000mm
500mm
0mm
Tank Datum
Defect Colour Scheme < 20% 20% - 29% 30% - 39% 40% - 49% 50% - 59% 60% - 69% 70% - 79% 80% - 89% 90% - 100% Weld Defect
Row: Plate Length: Orientation: Max discontinuity: Lower Threshold: Tank: Location: Company: Client: Date:
2 Plate: 1620 Plate Width: Raster Scan Method: Discontinuity Count: 29 Upper Threshold: 100
Import Threshold:
20%
0mm
500mm
1000mm
1500mm
2000mm
2500mm
3000mm
3500mm
4000mm
4500mm
5000mm
5500mm
6000mm
1500mm
1000mm
500mm
0mm
Tank Datum
Defect Colour Scheme < 20% 20% - 29% 30% - 39% 40% - 49% 50% - 59% 60% - 69% 70% - 79% 80% - 89% 90% - 100% Weld Defect
Row: Plate Length: Orientation: Max discontinuity: Lower Threshold: Tank: Location: Company: Client: Date:
4 Plate: 1620 Plate Width: Raster Scan Method: Discontinuity Count: 1 Upper Threshold: 100
Import Threshold:
20%
0mm
500mm
1000mm
1500mm
2000mm
2500mm
3000mm
3500mm
4000mm
4500mm
5000mm
5500mm
6000mm
1500mm
1000mm
500mm
0mm
Tank Datum
Defect Colour Scheme < 20% 20% - 29% 30% - 39% 40% - 49% 50% - 59% 60% - 69% 70% - 79% 80% - 89% 90% - 100% Weld Defect
Row: Plate Length: Orientation: Max discontinuity: Lower Threshold: Tank: Location: Company: Client: Date:
5 Plate: 1620 Plate Width: Raster Scan Method: Discontinuity Count: 13 Upper Threshold: 100
Import Threshold:
20%
0mm
500mm
1000mm
1500mm
2000mm
2500mm
3000mm
3500mm
4000mm
4500mm
5000mm
5500mm
6000mm
1500mm
1000mm
500mm
0mm
Tank Datum
Defect Colour Scheme < 20% 20% - 29% 30% - 39% 40% - 49% 50% - 59% 60% - 69% 70% - 79% 80% - 89% 90% - 100% Weld Defect
Row: Plate Length: Orientation: Max discontinuity: Lower Threshold: Tank: Location: Company: Client: Date:
6 Plate: 1620 Plate Width: Raster Scan Method: Discontinuity Count: 1 Upper Threshold: 100
Import Threshold:
20%
6000mm
5500mm
5000mm
4500mm
4000mm
3500mm
3000mm
2500mm
2000mm
1500mm
1000mm
500mm
0mm
1500mm
1000mm
500mm
0mm
Tank Datum
Defect Colour Scheme < 20% 20% - 29% 30% - 39% 40% - 49% 50% - 59% 60% - 69% 70% - 79% 80% - 89% 90% - 100% Weld Defect
Row: Plate Length: Orientation: Max discontinuity: Lower Threshold: Tank: Location: Company: Client: Date:
1 Plate: 1620 Plate Width: Uni-Directional Scan Method: Discontinuity Count: 35 Upper Threshold: 100 Import Threshold:
20%
0mm
500mm
1000mm
1500mm
2000mm
2500mm
3000mm
3500mm
4000mm
4500mm
5000mm
5500mm
6000mm
1500mm
1000mm
500mm
0mm
Tank Datum
Defect Colour Scheme < 20% 20% - 29% 30% - 39% 40% - 49% 50% - 59% 60% - 69% 70% - 79% 80% - 89% 90% - 100% Weld Defect
Row: Plate Length: Orientation: Max discontinuity: Lower Threshold: Tank: Location: Company: Client: Date:
2 Plate: 1620 Plate Width: Raster Scan Method: Discontinuity Count: 11 Upper Threshold: 100
Import Threshold:
20%
0mm
500mm
1000mm
1500mm
2000mm
2500mm
3000mm
3500mm
4000mm
4500mm
5000mm
5500mm
6000mm
1500mm
1000mm
500mm
0mm
Tank Datum
Defect Colour Scheme < 20% 20% - 29% 30% - 39% 40% - 49% 50% - 59% 60% - 69% 70% - 79% 80% - 89% 90% - 100% Weld Defect
Row: Plate Length: Orientation: Max discontinuity: Lower Threshold: Tank: Location: Company: Client: Date:
3 Plate: 1620 Plate Width: Raster Scan Method: Discontinuity Count: 6 Upper Threshold: 100
Import Threshold:
20%
0mm
500mm
1000mm
1500mm
2000mm
2500mm
1500mm
1000mm
500mm
0mm
Tank Datum
Defect Colour Scheme < 20% 20% - 29% 30% - 39% 40% - 49% 50% - 59% 60% - 69% 70% - 79% 80% - 89% 90% - 100% Weld Defect
Row: Plate Length: Orientation: Max discontinuity: Lower Threshold: Tank: Location: Company: Client: Date:
4 Plate: 1620 Plate Width: Raster Scan Method: Discontinuity Count: 1 Upper Threshold: 100
Import Threshold:
20%
0mm
500mm
1000mm
1500mm
2000mm
2500mm
3000mm
3500mm
4000mm
4500mm
5000mm
5500mm
6000mm
1500mm
1000mm
500mm
0mm
Tank Datum
Defect Colour Scheme < 20% 20% - 29% 30% - 39% 40% - 49% 50% - 59% 60% - 69% 70% - 79% 80% - 89% 90% - 100% Weld Defect
Row: Plate Length: Orientation: Max discontinuity: Lower Threshold: Tank: Location: Company: Client: Date:
5 Plate: 1620 Plate Width: Raster Scan Method: Discontinuity Count: 5 Upper Threshold: 100
Import Threshold:
20%
0mm
500mm
1000mm
1500mm
2000mm
2500mm
3000mm
3500mm
4000mm
4500mm
5000mm
5500mm
6000mm
1500mm
1000mm
500mm
0mm
Tank Datum
Defect Colour Scheme < 20% 20% - 29% 30% - 39% 40% - 49% 50% - 59% 60% - 69% 70% - 79% 80% - 89% 90% - 100% Weld Defect
Row: Plate Length: Orientation: Max discontinuity: Lower Threshold: Tank: Location: Company: Client: Date:
7 Plate: 1620 Plate Width: Uni-Directional Scan Method: Discontinuity Count: 1 Upper Threshold: 100 Import Threshold:
20%
0mm
500mm
1000mm
1500mm
2000mm
2500mm
3000mm
3500mm
4000mm
4500mm
5000mm
5500mm
6000mm
1500mm
1000mm
500mm
0mm
Tank Datum
Defect Colour Scheme < 20% 20% - 29% 30% - 39% 40% - 49% 50% - 59% 60% - 69% 70% - 79% 80% - 89% 90% - 100% Weld Defect
Row: Plate Length: Orientation: Max discontinuity: Lower Threshold: Tank: Location: Company: Client: Date:
2 Plate: 1620 Plate Width: Uni-Directional Scan Method: Discontinuity Count: 10 Upper Threshold: 100 Import Threshold:
20%
0mm
500mm
1000mm
1500mm
2000mm
2500mm
3000mm
3500mm
4000mm
4500mm
5000mm
5500mm
6000mm
1500mm
1000mm
500mm
0mm
Tank Datum
Defect Colour Scheme < 20% 20% - 29% 30% - 39% 40% - 49% 50% - 59% 60% - 69% 70% - 79% 80% - 89% 90% - 100% Weld Defect
Row: Plate Length: Orientation: Max discontinuity: Lower Threshold: Tank: Location: Company: Client: Date:
3 Plate: 1620 Plate Width: Raster Scan Method: Discontinuity Count: 35 Upper Threshold: 100
Import Threshold:
20%
0mm
500mm
1000mm
1500mm
2000mm
2500mm
3000mm
3500mm
4000mm
4500mm
5000mm
5500mm
6000mm
1500mm
1000mm
500mm
0mm
Tank Datum
Defect Colour Scheme < 20% 20% - 29% 30% - 39% 40% - 49% 50% - 59% 60% - 69% 70% - 79% 80% - 89% 90% - 100% Weld Defect
Row: Plate Length: Orientation: Max discontinuity: Lower Threshold: Tank: Location: Company: Client: Date:
4 Plate: 1620 Plate Width: Raster Scan Method: Discontinuity Count: 99 Upper Threshold: 100
Import Threshold:
20%
0mm
500mm
1000mm
1500mm
2000mm
2500mm
3000mm
3500mm
4000mm
4500mm
5000mm
5500mm
6000mm
1500mm
1000mm
500mm
0mm
Tank Datum
Defect Colour Scheme < 20% 20% - 29% 30% - 39% 40% - 49% 50% - 59% 60% - 69% 70% - 79% 80% - 89% 90% - 100% Weld Defect
Row: Plate Length: Orientation: Max discontinuity: Lower Threshold: Tank: Location: Company: Client: Date:
5 Plate: 1620 Plate Width: Raster Scan Method: Discontinuity Count: 27 Upper Threshold: 100
Import Threshold:
20%
0mm
500mm
1000mm
1500mm
2000mm
2500mm
3000mm
3500mm
1500mm
1000mm
500mm
0mm
Tank Datum
Defect Colour Scheme < 20% 20% - 29% 30% - 39% 40% - 49% 50% - 59% 60% - 69% 70% - 79% 80% - 89% 90% - 100% Weld Defect
Row: Plate Length: Orientation: Max discontinuity: Lower Threshold: Tank: Location: Company: Client: Date:
7 Plate: 1620 Plate Width: Uni-Directional Scan Method: Discontinuity Count: 1 Upper Threshold: 100 Import Threshold:
20%
6000mm
5500mm
5000mm
4500mm
4000mm
3500mm
3000mm
2500mm
2000mm
1500mm
1000mm
500mm
0mm
1500mm
1000mm
500mm
0mm
Tank Datum
Defect Colour Scheme < 20% 20% - 29% 30% - 39% 40% - 49% 50% - 59% 60% - 69% 70% - 79% 80% - 89% 90% - 100% Weld Defect
Row: Plate Length: Orientation: Max discontinuity: Lower Threshold: Tank: Location: Company: Client: Date:
1 Plate: 1630 Plate Width: Uni-Directional Scan Method: Discontinuity Count: 46 Upper Threshold: 100 Import Threshold:
20%
0mm
500mm
1000mm
1500mm
2000mm
2500mm
3000mm
3500mm
4000mm
4500mm
5000mm
5500mm
6000mm
1500mm
1000mm
500mm
0mm
Tank Datum
Defect Colour Scheme < 20% 20% - 29% 30% - 39% 40% - 49% 50% - 59% 60% - 69% 70% - 79% 80% - 89% 90% - 100% Weld Defect
Row: Plate Length: Orientation: Max discontinuity: Lower Threshold: Tank: Location: Company: Client: Date:
2 Plate: 1630 Plate Width: Raster Scan Method: Discontinuity Count: 20 Upper Threshold: 100
Import Threshold:
20%
0mm
500mm
1000mm
1500mm
2000mm
2500mm
3000mm
3500mm
4000mm
4500mm
5000mm
5500mm
6000mm
1500mm
1000mm
500mm
0mm
Tank Datum
Defect Colour Scheme < 20% 20% - 29% 30% - 39% 40% - 49% 50% - 59% 60% - 69% 70% - 79% 80% - 89% 90% - 100% Weld Defect
Row: Plate Length: Orientation: Max discontinuity: Lower Threshold: Tank: Location: Company: Client: Date:
3 Plate: 1630 Plate Width: Raster Scan Method: Discontinuity Count: 48 Upper Threshold: 100
Import Threshold:
20%
0mm
500mm
1000mm
1500mm
2000mm
2500mm
3000mm
3500mm
4000mm
4500mm
5000mm
5500mm
6000mm
1500mm
1000mm
500mm
0mm
Tank Datum
Defect Colour Scheme < 20% 20% - 29% 30% - 39% 40% - 49% 50% - 59% 60% - 69% 70% - 79% 80% - 89% 90% - 100% Weld Defect
Row: Plate Length: Orientation: Max discontinuity: Lower Threshold: Tank: Location: Company: Client: Date:
4 Plate: 1630 Plate Width: Raster Scan Method: Discontinuity Count: 4 Upper Threshold: 100
Import Threshold:
20%
0mm
500mm
1000mm
1500mm
2000mm
2500mm
3000mm
3500mm
4000mm
4500mm
5000mm
5500mm
6000mm
1500mm
1000mm
500mm
0mm
Tank Datum
Defect Colour Scheme < 20% 20% - 29% 30% - 39% 40% - 49% 50% - 59% 60% - 69% 70% - 79% 80% - 89% 90% - 100% Weld Defect
Row: Plate Length: Orientation: Max discontinuity: Lower Threshold: Tank: Location: Company: Client: Date:
5 Plate: 1630 Plate Width: Raster Scan Method: Discontinuity Count: 80 Upper Threshold: 100
Import Threshold:
20%
0mm
500mm
1000mm
1500mm
2000mm
2500mm
3000mm
3500mm
4000mm
4500mm
5000mm
5500mm
6000mm
1500mm
1000mm
500mm
0mm
Tank Datum
Defect Colour Scheme < 20% 20% - 29% 30% - 39% 40% - 49% 50% - 59% 60% - 69% 70% - 79% 80% - 89% 90% - 100% Weld Defect
Row: Plate Length: Orientation: Max discontinuity: Lower Threshold: Tank: Location: Company: Client: Date:
2 Plate: 1630 Plate Width: Raster Scan Method: Discontinuity Count: 37 Upper Threshold: 100
Import Threshold:
20%
0mm
500mm
1000mm
1500mm
2000mm
2500mm
3000mm
3500mm
4000mm
4500mm
5000mm
5500mm
6000mm
1500mm
1000mm
500mm
0mm
Tank Datum
Defect Colour Scheme < 20% 20% - 29% 30% - 39% 40% - 49% 50% - 59% 60% - 69% 70% - 79% 80% - 89% 90% - 100% Weld Defect
Row: Plate Length: Orientation: Max discontinuity: Lower Threshold: Tank: Location: Company: Client: Date:
3 Plate: 1630 Plate Width: Raster Scan Method: Discontinuity Count: 38 Upper Threshold: 100
Import Threshold:
20%
0mm
500mm
1000mm
1500mm
2000mm
2500mm
1500mm
1000mm
500mm
0mm
Tank Datum
Defect Colour Scheme < 20% 20% - 29% 30% - 39% 40% - 49% 50% - 59% 60% - 69% 70% - 79% 80% - 89% 90% - 100% Weld Defect
Row: Plate Length: Orientation: Max discontinuity: Lower Threshold: Tank: Location: Company: Client: Date:
4 Plate: 1630 Plate Width: Raster Scan Method: Discontinuity Count: 33 Upper Threshold: 100
Import Threshold:
20%
0mm
500mm
1000mm
1500mm
2000mm
2500mm
3000mm
3500mm
4000mm
4500mm
5000mm
5500mm
6000mm
1500mm
1000mm
500mm
0mm
Tank Datum
Defect Colour Scheme < 20% 20% - 29% 30% - 39% 40% - 49% 50% - 59% 60% - 69% 70% - 79% 80% - 89% 90% - 100% Weld Defect
Row: Plate Length: Orientation: Max discontinuity: Lower Threshold: Tank: Location: Company: Client: Date:
5 Plate: 1630 Plate Width: Raster Scan Method: Discontinuity Count: 28 Upper Threshold: 100
Import Threshold:
20%
0mm
500mm
1000mm
1500mm
2000mm
2500mm
3000mm
3500mm
4000mm
4500mm
5000mm
5500mm
1500mm
1000mm
500mm
0mm
Tank Datum
Defect Colour Scheme < 20% 20% - 29% 30% - 39% 40% - 49% 50% - 59% 60% - 69% 70% - 79% 80% - 89% 90% - 100% Weld Defect
Row: Plate Length: Orientation: Max discontinuity: Lower Threshold: Tank: Location: Company: Client: Date:
6 Plate: 1630 Plate Width: Raster Scan Method: Discontinuity Count: 4 Upper Threshold: 100
Import Threshold:
20%
0mm
500mm
1000mm
1500mm
2000mm
2500mm
3000mm
3500mm
1500mm
1000mm
500mm
0mm
Tank Datum
Defect Colour Scheme < 20% 20% - 29% 30% - 39% 40% - 49% 50% - 59% 60% - 69% 70% - 79% 80% - 89% 90% - 100% Weld Defect
Row: Plate Length: Orientation: Max discontinuity: Lower Threshold: Tank: Location: Company: Client: Date:
7 Plate: 1630 Plate Width: Uni-Directional Scan Method: Discontinuity Count: 42 Upper Threshold: 100 Import Threshold:
20%
7000mm
6500mm
6000mm
5500mm
5000mm
4500mm
4000mm
3500mm
3000mm
2500mm
2000mm
1500mm
1000mm
500mm
0mm
1500mm
1000mm
500mm
0mm
Tank Datum
Defect Colour Scheme < 20% 20% - 29% 30% - 39% 40% - 49% 50% - 59% 60% - 69% 70% - 79% 80% - 89% 90% - 100% Weld Defect
Row: Plate Length: Orientation: Max discontinuity: Lower Threshold: Tank: Location: Company: Client: Date:
1 Plate: 1610 Plate Width: Uni-Directional Scan Method: Discontinuity Count: 1 Upper Threshold: 100 Import Threshold:
20%
0mm
500mm
1000mm
1500mm
2000mm
2500mm
3000mm
3500mm
4000mm
4500mm
5000mm
5500mm
6000mm
1500mm
1000mm
500mm
0mm
Tank Datum
Defect Colour Scheme < 20% 20% - 29% 30% - 39% 40% - 49% 50% - 59% 60% - 69% 70% - 79% 80% - 89% 90% - 100% Weld Defect
Row: Plate Length: Orientation: Max discontinuity: Lower Threshold: Tank: Location: Company: Client: Date:
2 Plate: 1610 Plate Width: Raster Scan Method: Discontinuity Count: 10 Upper Threshold: 100
Import Threshold:
20%
0mm
500mm
1000mm
1500mm
2000mm
2500mm
3000mm
3500mm
4000mm
4500mm
5000mm
5500mm
6000mm
1500mm
1000mm
500mm
0mm
Tank Datum
Defect Colour Scheme < 20% 20% - 29% 30% - 39% 40% - 49% 50% - 59% 60% - 69% 70% - 79% 80% - 89% 90% - 100% Weld Defect
Row: Plate Length: Orientation: Max discontinuity: Lower Threshold: Tank: Location: Company: Client: Date:
3 Plate: 1610 Plate Width: Raster Scan Method: Discontinuity Count: 25 Upper Threshold: 100
Import Threshold:
20%
0mm
500mm
1000mm
1500mm
2000mm
2500mm
3000mm
3500mm
4000mm
4500mm
5000mm
5500mm
6000mm
1500mm
1000mm
500mm
0mm
Tank Datum
Defect Colour Scheme < 20% 20% - 29% 30% - 39% 40% - 49% 50% - 59% 60% - 69% 70% - 79% 80% - 89% 90% - 100% Weld Defect
Row: Plate Length: Orientation: Max discontinuity: Lower Threshold: Tank: Location: Company: Client: Date:
4 Plate: 1610 Plate Width: Raster Scan Method: Discontinuity Count: 42 Upper Threshold: 100
Import Threshold:
20%
0mm
500mm
1000mm
1500mm
2000mm
2500mm
3000mm
3500mm
4000mm
4500mm
5000mm
5500mm
6000mm
6500mm
7000mm
1500mm
1000mm
500mm
0mm
Tank Datum
Defect Colour Scheme < 20% 20% - 29% 30% - 39% 40% - 49% 50% - 59% 60% - 69% 70% - 79% 80% - 89% 90% - 100% Weld Defect
Row: Plate Length: Orientation: Max discontinuity: Lower Threshold: Tank: Location: Company: Client: Date:
5 Plate: 1610 Plate Width: Uni-Directional Scan Method: Discontinuity Count: 33 Upper Threshold: 100 Import Threshold:
20%
0mm
500mm
1000mm
1500mm
2000mm
2500mm
3000mm
3500mm
4000mm
4500mm
5000mm
5500mm
6000mm
1500mm
1000mm
500mm
0mm
Tank Datum
Defect Colour Scheme < 20% 20% - 29% 30% - 39% 40% - 49% 50% - 59% 60% - 69% 70% - 79% 80% - 89% 90% - 100% Weld Defect
Row: Plate Length: Orientation: Max discontinuity: Lower Threshold: Tank: Location: Company: Client: Date:
2 Plate: 1610 Plate Width: Uni-Directional Scan Method: Discontinuity Count: 40 Upper Threshold: 100 Import Threshold:
20%
0mm
500mm
1000mm
1500mm
2000mm
2500mm
3000mm
3500mm
4000mm
4500mm
5000mm
5500mm
6000mm
1500mm
1000mm
500mm
0mm
Tank Datum
Defect Colour Scheme < 20% 20% - 29% 30% - 39% 40% - 49% 50% - 59% 60% - 69% 70% - 79% 80% - 89% 90% - 100% Weld Defect
Row: Plate Length: Orientation: Max discontinuity: Lower Threshold: Tank: Location: Company: Client: Date:
3 Plate: 1610 Plate Width: Raster Scan Method: Discontinuity Count: 63 Upper Threshold: 100
Import Threshold:
20%
0mm
500mm
1000mm
1500mm
2000mm
2500mm
3000mm
3500mm
4000mm
4500mm
5000mm
5500mm
6000mm
1500mm
1000mm
500mm
0mm
Tank Datum
Defect Colour Scheme < 20% 20% - 29% 30% - 39% 40% - 49% 50% - 59% 60% - 69% 70% - 79% 80% - 89% 90% - 100% Weld Defect
Row: Plate Length: Orientation: Max discontinuity: Lower Threshold: Tank: Location: Company: Client: Date:
4 Plate: 1610 Plate Width: Raster Scan Method: Discontinuity Count: 33 Upper Threshold: 100
Import Threshold:
20%
0mm
500mm
1000mm
1500mm
2000mm
2500mm
3000mm
3500mm
4000mm
4500mm
5000mm
5500mm
6000mm
1500mm
1000mm
500mm
0mm
Tank Datum
Defect Colour Scheme < 20% 20% - 29% 30% - 39% 40% - 49% 50% - 59% 60% - 69% 70% - 79% 80% - 89% 90% - 100% Weld Defect
Row: Plate Length: Orientation: Max discontinuity: Lower Threshold: Tank: Location: Company: Client: Date:
5 Plate: 1610 Plate Width: Raster Scan Method: Discontinuity Count: 37 Upper Threshold: 100
Import Threshold:
20%
4500mm
4000mm
3500mm
3000mm
2500mm
2000mm
1500mm
1000mm
500mm
0mm
1500mm
1000mm
500mm
0mm
Tank Datum
Defect Colour Scheme < 20% 20% - 29% 30% - 39% 40% - 49% 50% - 59% 60% - 69% 70% - 79% 80% - 89% 90% - 100% Weld Defect
Row: Plate Length: Orientation: Max discontinuity: Lower Threshold: Tank: Location: Company: Client: Date:
1 Plate: 1600 Plate Width: Uni-Directional Scan Method: Discontinuity Count: 20 Upper Threshold: 100 Import Threshold:
20%
0mm
500mm
1000mm
1500mm
2000mm
2500mm
3000mm
3500mm
4000mm
4500mm
5000mm
5500mm
6000mm
1500mm
1000mm
500mm
0mm
Tank Datum
Defect Colour Scheme < 20% 20% - 29% 30% - 39% 40% - 49% 50% - 59% 60% - 69% 70% - 79% 80% - 89% 90% - 100% Weld Defect
Row: Plate Length: Orientation: Max discontinuity: Lower Threshold: Tank: Location: Company: Client: Date:
2 Plate: 1600 Plate Width: Raster Scan Method: Discontinuity Count: 17 Upper Threshold: 100
Import Threshold:
20%
0mm
500mm
1000mm
1500mm
2000mm
2500mm
3000mm
3500mm
4000mm
4500mm
5000mm
5500mm
6000mm
1500mm
1000mm
500mm
0mm
Tank Datum
Defect Colour Scheme < 20% 20% - 29% 30% - 39% 40% - 49% 50% - 59% 60% - 69% 70% - 79% 80% - 89% 90% - 100% Weld Defect
Row: Plate Length: Orientation: Max discontinuity: Lower Threshold: Tank: Location: Company: Client: Date:
4 Plate: 1600 Plate Width: Raster Scan Method: Discontinuity Count: 28 Upper Threshold: 100
Import Threshold:
20%
2000mm
Tank Datum
1500mm
1000mm
500mm
0mm
0mm
500mm
1000mm
1500mm
Defect Colour Scheme < 20% 20% - 29% 30% - 39% 40% - 49% 50% - 59% 60% - 69% 70% - 79% 80% - 89% 90% - 100% Weld Defect
Row: Plate Length: Orientation: Max discontinuity: Lower Threshold: Tank: Location: Company: Client: Date:
6 Plate: 1690 Plate Width: Uni-Directional Scan Method: Discontinuity Count: 8 Upper Threshold: 100 Import Threshold:
20%
Sample Inspection Report Tank No. 8 Patch Repair Plate Locations Tank Floor Plates
During the survey the FloormapVS reporting software was used to design the patch plate locations at the clients request. All defects in excess of 55% loss of the nominal floor plate thickness were highlighted for patch repairs. The FloormapVS reporting software was used to design the patch plate locations and also produce a patch plate list detailing floor plates requiring patch plates, patch plate size and patch plate positions. The following pages show:
Defect Colour Scheme < 20% 20% - 29% 30% - 39% 40% - 49% 50% - 59% 60% - 69% 70% - 79% 80% - 89% 90% - 100% Weld Defect
0mm
500mm
1000mm
1500mm
2000mm
2500mm
3000mm
3500mm
4000mm
4500mm
5000mm
5500mm
1500mm
1000mm
500mm
0mm
Tank Datum
Defect Colour Scheme < 20% 20% - 29% 30% - 39% 40% - 49% 50% - 59% 60% - 69% 70% - 79% 80% - 89% 90% - 100% Weld Defect
Row: Plate Length: Orientation: Max discontinuity: Lower Threshold: Tank: Location: Company: Client: Date:
4 Plate: 1640 Plate Width: Raster Scan Method: Discontinuity Count: 4 Upper Threshold: 100
Import Threshold:
20%
0mm
500mm
1000mm
1500mm
2000mm
2500mm
3000mm
3500mm
4000mm
4500mm
5000mm
5500mm
6000mm
1500mm
1000mm
500mm
0mm
Tank Datum
Defect Colour Scheme < 20% 20% - 29% 30% - 39% 40% - 49% 50% - 59% 60% - 69% 70% - 79% 80% - 89% 90% - 100% Weld Defect
Row: Plate Length: Orientation: Max discontinuity: Lower Threshold: Tank: Location: Company: Client: Date:
6 Plate: 1630 Plate Width: Raster Scan Method: Discontinuity Count: 55 Upper Threshold: 100
Import Threshold:
20%
0mm
500mm
1000mm
1500mm
2000mm
2500mm
3000mm
3500mm
4000mm
4500mm
5000mm
5500mm
6000mm
1500mm
1000mm
500mm
0mm
Tank Datum
Defect Colour Scheme < 20% 20% - 29% 30% - 39% 40% - 49% 50% - 59% 60% - 69% 70% - 79% 80% - 89% 90% - 100% Weld Defect
Row: Plate Length: Orientation: Max discontinuity: Lower Threshold: Tank: Location: Company: Client: Date:
5 Plate: 1630 Plate Width: Raster Scan Method: Discontinuity Count: 211 Upper Threshold: 100
Import Threshold:
20%
2000mm
1500mm
1000mm
500mm
0mm
1500mm
1000mm
500mm
Tank Datum
0mm
Defect Colour Scheme < 20% 20% - 29% 30% - 39% 40% - 49% 50% - 59% 60% - 69% 70% - 79% 80% - 89% 90% - 100% Weld Defect
Row: Plate Length: Orientation: Max discontinuity: Lower Threshold: Tank: Location: Company: Client: Date:
1 Plate: 1620 Plate Width: Uni-Directional Scan Method: Discontinuity Count: 42 Upper Threshold: 100 Import Threshold:
20%
0mm
500mm
1000mm
1500mm
2000mm
2500mm
3000mm
3500mm
4000mm
4500mm
5000mm
5500mm
6000mm
1500mm
1000mm
500mm
0mm
Tank Datum
Defect Colour Scheme < 20% 20% - 29% 30% - 39% 40% - 49% 50% - 59% 60% - 69% 70% - 79% 80% - 89% 90% - 100% Weld Defect
Row: Plate Length: Orientation: Max discontinuity: Lower Threshold: Tank: Location: Company: Client: Date:
2 Plate: 1620 Plate Width: Raster Scan Method: Discontinuity Count: 11 Upper Threshold: 100
Import Threshold:
20%
0mm
500mm
1000mm
1500mm
2000mm
2500mm
3000mm
3500mm
4000mm
4500mm
5000mm
5500mm
6000mm
1500mm
1000mm
500mm
0mm
Tank Datum
Defect Colour Scheme < 20% 20% - 29% 30% - 39% 40% - 49% 50% - 59% 60% - 69% 70% - 79% 80% - 89% 90% - 100% Weld Defect
Row: Plate Length: Orientation: Max discontinuity: Lower Threshold: Tank: Location: Company: Client: Date:
7 Plate: 1620 Plate Width: Uni-Directional Scan Method: Discontinuity Count: 1 Upper Threshold: 100 Import Threshold:
20%
0mm
500mm
1000mm
1500mm
2000mm
2500mm
3000mm
3500mm
4000mm
4500mm
5000mm
5500mm
6000mm
1500mm
1000mm
500mm
0mm
Tank Datum
Defect Colour Scheme < 20% 20% - 29% 30% - 39% 40% - 49% 50% - 59% 60% - 69% 70% - 79% 80% - 89% 90% - 100% Weld Defect
Row: Plate Length: Orientation: Max discontinuity: Lower Threshold: Tank: Location: Company: Client: Date:
4 Plate: 1620 Plate Width: Raster Scan Method: Discontinuity Count: 99 Upper Threshold: 100
Import Threshold:
20%
0mm
500mm
1000mm
1500mm
2000mm
2500mm
3000mm
3500mm
4000mm
4500mm
5000mm
5500mm
6000mm
1500mm
1000mm
500mm
0mm
Tank Datum
Defect Colour Scheme < 20% 20% - 29% 30% - 39% 40% - 49% 50% - 59% 60% - 69% 70% - 79% 80% - 89% 90% - 100% Weld Defect
Row: Plate Length: Orientation: Max discontinuity: Lower Threshold: Tank: Location: Company: Client: Date:
3 Plate: 1630 Plate Width: Raster Scan Method: Discontinuity Count: 48 Upper Threshold: 100
Import Threshold:
20%
0mm
500mm
1000mm
1500mm
2000mm
2500mm
3000mm
3500mm
4000mm
4500mm
5000mm
5500mm
6000mm
1500mm
1000mm
500mm
0mm
Tank Datum
Defect Colour Scheme < 20% 20% - 29% 30% - 39% 40% - 49% 50% - 59% 60% - 69% 70% - 79% 80% - 89% 90% - 100% Weld Defect
Row: Plate Length: Orientation: Max discontinuity: Lower Threshold: Tank: Location: Company: Client: Date:
5 Plate: 1630 Plate Width: Raster Scan Method: Discontinuity Count: 80 Upper Threshold: 100
Import Threshold:
20%
0mm
500mm
1000mm
1500mm
2000mm
2500mm
3000mm
3500mm
4000mm
4500mm
5000mm
5500mm
6000mm
1500mm
1000mm
500mm
0mm
Tank Datum
Defect Colour Scheme < 20% 20% - 29% 30% - 39% 40% - 49% 50% - 59% 60% - 69% 70% - 79% 80% - 89% 90% - 100% Weld Defect
Row: Plate Length: Orientation: Max discontinuity: Lower Threshold: Tank: Location: Company: Client: Date:
2 Plate: 1610 Plate Width: Raster Scan Method: Discontinuity Count: 10 Upper Threshold: 100
Import Threshold:
20%
0mm
500mm
1000mm
1500mm
2000mm
2500mm
3000mm
3500mm
4000mm
4500mm
5000mm
5500mm
6000mm
1500mm
1000mm
500mm
0mm
Tank Datum
Defect Colour Scheme < 20% 20% - 29% 30% - 39% 40% - 49% 50% - 59% 60% - 69% 70% - 79% 80% - 89% 90% - 100% Weld Defect
Row: Plate Length: Orientation: Max discontinuity: Lower Threshold: Tank: Location: Company: Client: Date:
4 Plate: 1600 Plate Width: Raster Scan Method: Discontinuity Count: 28 Upper Threshold: 100
Import Threshold:
20%
The nozzle and nozzle plate coatings appear to be in a good condition. The Magnetic Particle Inspection detected no linear crack type indications on the nozzle or nozzle plate welds. Internal of tank Ultrasonic readings 12 Oclock- 17mm / 3 Oclock- 17mm / 6 Oclock- 17mm / 9 Oclock- 17mm
No internal nozzle coating present. The Magnetic Particle Inspection detected no linear crack type indications on the nozzle welds.
NOZZLE 2, External of tank Ultrasonic readings 12 Oclock- 8mm / 3 Oclock- 7.9mm / 6 Oclock- 8.2mm / 9 Oclock-8mm
The nozzle and nozzle plate coatings appear to be in a good condition. The Magnetic Particle Inspection detected no linear crack type indications on the nozzle or nozzle plate welds. Internal of tank Ultrasonic readings 12 Oclock- 8mm / 3 Oclock- 7.5mm / 6 Oclock- 8mm / 9 Oclock- 8mm
No internal nozzle coating present. The Magnetic Particle Inspection detected no linear crack type indications on the nozzle welds.
NOZZLE 3, External of tank Ultrasonic readings 12 Oclock- 18mm / 3 Oclock- 18mm / 6 Oclock- 18mm / 9 Oclock- 18mm
The nozzle and nozzle plate coatings appear to be in a good condition. The Magnetic Particle Inspection detected no linear crack type indications on the nozzle or nozzle plate welds. Internal of tank Ultrasonic readings 12 Oclock- 5.2mm / 3 Oclock- 5.5mm / 6 Oclock- 5.6mm / 9 Oclock- 5.5mm
No internal nozzle coating present. The Magnetic Particle Inspection detected no linear crack type indications on the nozzle welds.
Observations Scorpion B-scan was unable to achieve sufficient data due to surface conditions. Therefore a manual scan using the Krautkrammer USM 25 ultrasonic set was performed in this area.
Scan 1 Course 2 Nominal Plate Defect Thickness starts 10.0 mm 1240mm Scan 1 Course 3 Nominal Plate Thickness 8.0 mm
Scan 2 Course 3 Nominal Plate Defect Thickness starts 8.0 mm 1530mm Scan 2 Course 4 Nominal Plate Thickness 6.0 mm Scan 2 Course 5 Nominal Plate Thickness 6.0 mm
Scan 3 Course 2 Nominal Plate Defect Thickness starts 10.5 mm 1690mm Scan 3 Course 3 Nominal Plate Defect Thickness starts 8.0 mm 1530mm Scan 3 Course 4 Nominal Plate Thickness 6.0 mm
Observations Corrosion detected along the entire width of plate C4/4. Holes were detected.
Scan 4 Course 3 Nominal Plate Thickness 8.0 mm Scan 4 Course 4 Nominal Plate Thickness 6.0 mm
Observations Corrosion detected along the entire width of plate C4/4. Holes were detected.
Scan 5 Course 2 Nominal Plate Defect Thickness starts 10.0 mm 1670mm Scan 5 Course 3 Nominal Plate Defect Thickness starts 8.0 mm 1730mm
Observations Corrosion detected along the entire width of plate C4/5. Holed areas were detected.
Scan 6 Course 3 Nominal Plate Thickness 8.0 mm Scan 6 Course 4 Nominal Plate Thickness 6.0 mm
Observations Corrosion detected along the entire width of plate C4/5. Holed areas were detected.
Scan 7 Course 2 Nominal Plate Defect Thickness starts 10.0 mm 1740mm Scan 7 Course 3 Nominal Plate Defect Thickness starts 8.0 mm 1430mm Scan 7 Course 4 Nominal Plate Thickness 6.0 mm
Observations Corrosion detected along the width of plate C4/5. Holed areas were detected.
Observations Scorpion B-scan was unable to achieve sufficient data due to surface conditions. Therefore a manual scan using the Krautkrammer USM 25 ultrasonic set was performed in this area.
Scan 9 Course 2 Nominal Plate Thickness 10.0 mm Scan 9 Course 3 Nominal Plate Thickness 8.0 mm
Scan 10 Course 1 Nominal Plate Defect Thickness starts 12.5 mm Unable to obtain results
Observations Scorpion B-scan was unable to achieve sufficient data due to surface conditions.
Scan 16 Course 3 Nominal Plate Defect Thickness starts 8.0 mm 0mm 8.0mm 940mm
Walkway C5/15
C5/14
C5/13
C5/12
C5/11
C5/10
C5/9
C5/8 C5/7
C5/6
C5/5
C5/4
C5/3
C5/2
C5/1
C4/15
C4/14
C4/13
C4/12
C4/11
C410
C4/9
C4/8
C4/7
C4/6
C4/5
C4/4
C4/3
C4/2
C4/1
C3/15
C3/14
C3/13
Pipe
C3/12
C3/11
C3/10
C3/9
C3/8
C3/7
C3/6
C3/5
Pipe
C3/4
C3/3
C3/2
C3/1
C2/15
C2/14
C2/13
C2/12
C2/11
C2/10
C2/9
C2/8
C2/7
C2/6
C2/5
C2/4
C2/3
C2/2
C2/1
C1/15
C1/14
C1/13
C1/12
C1/11
C1/10
C1/9
C1/8
C1/7
C1/6
C1/5
C1/4
C1/3
C1/2 Nozzles
C1/1
Manway Scan 1
Course 1, (12mm N.P.T) Course 2, (10mm N.P.T) Course 3, (8mm N.P.T) Course 4, (6mm N.P.T) Course 5, (6mm N.P.T) ( N.P.T) - Nominal plate thickness.
Sample Inspection report Ultrasonic Thickness Measurements External Floor Plates (toe) Tank ID: 8
All measurements are in millimeters
Ultrasonic thickness measurements were taken in a clockwise direction every 500mm starting from centre of manway 1
500mm 3000mm 5500mm 8000mm 10500mm 13000mm 15500mm 18000mm 20500mm 23000mm 25500mm 28000mm 30500mm 33000mm 35500mm 38000mm 41000 43500 45000 48500 51000 53500 56000 8500
7.1 7.1 7.2 7.1 7.5 7.4 7.3 7.1 7 7.4 7.5 7.9 7.9 7.3 7.1 7.5 7.8 7.8 7.2 7.1 7.1 7.8 7.2 7
1000mm 3500mm 6000mm 8500mm 11000mm 13500mm 16000mm 18500mm 21000mm 23500mm 26000mm 28500mm 31000mm 33500mm 36000mm 38500mm 41500 44000 46500 49006 51500 54000 56000 59000
7.5 7.2 7.2 7.3 7.2 7 7.4 7.9 7.2 7.4 7.2 7.1 7.8 7.8 8 7.9 7.1 7 7.2 7.9 7.7 7.8 7.2 7.2
1500mm 4000mm 6500mm 9000mm 11500mm 14000mm 16500mm 19000mm 21500mm 24000mm 26500mm 29000mm 31500mm 34000mm 36500mm 39500mm 42000 44500 47000 49500 52000 54500 57000 59500
7.4 8 8 7.9 7.2 7.1 8.1 7.3 7.7 7.5 7.2 7.2 7.9 7.9 7.1 8 7.2 7.1 7.1 7.8 7.9 7.7 7.1
2000mm 4500mm 7000mm 9500mm 12000mm 14500mm 17000mm 19500mm 22000mm 24500mm 27000mm 29500mm 32000mm 34500mm 37000mm 40000mm 42500 4500 47500 50000 52500 55000 57500 60000
7.1 7.4 8 8 7.8 7.1 8.2 7.5 7.2 7.5 7.1 7.3 7.8 7.9 8 8.1 7.5 7.4 7.7 7.8 7 7.7 7 7.3
2500mm 5000mm 7500mm 10000mm 12500mm 15000mm 17500mm 20000mm 22500mm 25000mm 27500mm 30000mm 32500mm 35000mm 37500mm 40500mm 43000 45500 48000 50500 53000 55500 58000 60500
8.1 8 8 8.2 7.5 7.2 7.1 7.2 7.3 7.3 7.5 7.1 7.2 7.2 7.5 7.9 7.6 7.3 7.7 7.2 7.9 7.1 7.9 7.1
61000 63500 66000 68500 71000 73500 76000 78500 81000 83500 86000
7 7.7 7.8 7.6 7.9 7.6 7.9 7.9 7.7 7.7 7.5
61500 64000 66500 69000 71500 74000 76500 79000 81500 84000 865000
7.9 7.7 7.8 7.6 7 7.7 7.8 7.9 7.5 7.7 7.6
62000 64500 67000 69500 72000 74500 77000 79500 82000 84500
7.5 7.7 7.7 7.5 7.2 7.5 7.7 7.7 7.7 7.6
62500 65000 67500 70000 72500 75000 77500 80000 82500 85000
7.3 7.5 7.6 7.3 7.2 7.6 7.9 7.9 7.9 7.5
63000 65500 68000 70500 73000 75500 78000 80500 83000 85500
1/1
1/3 2/4 3/4 4/3 4/4 5/4 6/4 6/5 7/4 8/4 8/5 9/4 10/5 10/4 10/6 11/4 12/4
1/4
2/1
3/1
2/2
3/5 4/5 5/5 6/6 7/5 8/6 9/5 10/7 11/5 12/5 12/6 13/5 14/5 14/6 15/5 16/4 16/5
4/1 5/1
6/1
5/3
6/2
7/3 8/3
9/3 10/3 11/3 12/3 13/3 14/3 14/4 15/3 16/2 16/3 17/2 18/2
19/1
13/4
15/2
15/4
15/6
17/6
17/2
18/1
17/2
18/5
19/2
Roof Plates
All measurements are in Millimeters Plate 1/1 1/2 1/3 1/4 2/1 2/2 2/3 2/4 2/5 3/1 3/2 3/3 3/4 3/5 3/6 4/1 4/2 4/3 4/4 4/5 5/1 5/2 5/3 5/4 5/5 5/6 6/1 6/2 6/3 6/4 6/5 6/6 6/7 7/1 7/2 7/3 7/4 7/5 7/6 Reading 1 4.5mm 4.4 4.4 4.4 4.5 4.5 4.4 4.4 4.3 4.5 4.4 4.2 4.5 4.4 4.4 4.5 4.5 4.8 4.4 4.4 4.4 4.8 5.0 4.8 4.4 4.5 4.8 4.7 4.9 4.9 5.0 4.7 4.7 5.0 4.7 4.8 5.0 5.0 4.8 Reading 2 4.4mm 4.4 4.4 4.4 4.5 4.5 4.5 4.3 4.4 4.2 4.3 4.4 4.5 4.4 4.4 4.4 4.4 4.8 4.4 4.4 4.4 4.7 5.0 4.9 4.4 4.4 4.8 4.8 4.8 4.8 4.9 4.8 4.8 4.8 4.8 4.8 4.9 5.0 4.7 Reading 3 4.5mm 4.2 4.5 4.3 4.4 4.5 4.7 4.4 4.4 4.5 4.4 4.5 4.5 4.4 4.2 4.4 4.4 4.8 4.4 4.5 4.5 4.8 4.9 4.9 4.5 4.5 4.8 4.7 4.8 4.8 4.9 4.8 4.8 4.8 4.8 4.8 5.0 5.0 4.8 Reading 4 4.5mm 4.5 4.5 4.1 4.6 4.5 4.4 4.4 4.3 .5 4.4 4.4 4.4 4.4 4.5 4.3 4.5 4.8 4.4 4.5 4.4 4.8 4.8 4.8 4.5 4.5 4.8 4.7 4.9 4.8 4.8 4.7 4.7 4.8 4.9 4.8 5.0 4.9 4.8 Reading 5 4.5 4.5 4.5 4.2 4.4 4.5 4.5 4.4 4.4 4.5 4.5 4.4 4.5 4.2 4.5 4.4 4.4 4.7 4.4 4.5 4.4 4.8 4.8 4.9 4.4 4.5 4.8 4.7 5.0 4.8 4.8 4.8 4.4 4.8 4.9 4.9 5.0 4.9 4.8
Plate 15/1 15/2 15/3 15/4 15/5 15/6 16/1 16/2 16/3 16/4 16/5 17/1 17/2 17/3 17/4 17/5 17/6 18/1 18/2 18/3 18/4 18/5 19/1 19/2 19/3 19/4
Reading 1 4.5 4.8 4.8 4.8 4.6 4.4 4.5 4.7 4.8 4.9 4.4 4.4 4.1 4.8 4.8 4.5 4.2 4.2 4.8 4.7 4.5 4.5 4.4 4.5 4.4 4.8
Reading 2 4.4 4.8 5 4.8 4.6 4.4 4.2 4.8 4.8 4.6 4.3 4.4 4.2 0.5 4.8 4.3 4.3 4.5 4.6 4.8 4.4 4.4 4.5 4.4 4.4 4.7
Reading 3 4.5 4.8 5 4.7 4.7 4.5 4.4 4.8 4.8 4.7 4.4 4.5 4.4 4.9 4.8 4.5 4.2 4.3 4.8 4.8 4.5 4.5 4.5 4.5 4.5 4.7
Reading 4 4.4 4.8 4.8 4.8 4.7 4.5 4.4 4.7 4.8 4.8 4.3 4.4 4.4 4.8 4.8 4.4 4.5 4.4 4.7 4.9 4.3 4.4 4.4 4.6 4.4 4.7
Reading 5 4.5 4.8 5 4.8 4.6 4.5 4.5 4.9 4.8 4.8 4.4 4.4 4.2 4.7 4.8 4.3 4.1 4.2 4.8 4.8 4.5 4.3 4.5 4.5 4.5 4.
Sample Inspection Report Tank No. 8 Magnetic Particle Inspection / Visual Inspection External attachment welds
A magnetic particle and visual inspection of the following external attachment welds was carried out during this survey: Manway No linear crack type indications were detected during this survey. Welds appeared to be in a good condition with no significant undercut, corrosion, cracking or distortion visible. The coating appeared to be in a good condition. Compensation plates No linear crack type indications were detected during this survey. Welds appeared to be in a good condition with no significant undercut, corrosion, cracking or distortion visible. The coating appeared to be in a good condition. Roof vents and hatches No linear crack type indications were detected during this survey. Welds appeared to be in a good condition with no significant undercut, corrosion, cracking or distortion visible. The coating appeared to be in a good condition. Handrail Stanchions No linear crack type indications were detected during this survey. Welds appeared to be in a good condition with no significant undercut, corrosion, cracking or distortion visible. The coating appeared to be in a good condition. Steps / landings No linear crack type indications were detected during this survey. Welds appeared to be in a good condition with no significant undercut, corrosion, cracking or distortion visible. The coating appeared to be in a good condition.
The following external attachment welds could not be tested during this survey due to access restrictions: Vertical pipe brackets Vertical ladder brackets Roof Wind-guard Welds