Professional Documents
Culture Documents
9, August 2007
TLE6250
High Speed CAN-Transceiver
Automotive Power
TLE6250
Features CAN data transmission rate up to 1 MBaud Receive-only Mode and Stand-by Mode Suitable for 12 V and 24 V applications Excellent EMC performance (very high immunity and very low emission) Version for 5 V and 3.3 V microcontrollers Bus pins are short circuit proof to ground and battery voltage Overtemperature protection Very wide temperature range (-40 C up to 150 C) Green Product (RoHS compliant) AEC Qualified
Description The HS CAN-transceiver family TLE6250 (TLE6250G and TLE6250GV33) are monolithic integrated circuits that are available as bare die as well as in a PG-DSO-8 package. The ICs are optimized for high speed differential mode data transmission in automotive and industrial applications and they are compatible to ISO/DIS 11898. They work as an interface between the CAN protocol controller and the physical differential bus in both, 12 V and 24 V systems. The ICs are based on the Smart Power Technology SPT which allows bipolar and CMOS control circuitry in accordance with DMOS power devices existing on the same monolithic circuit. The TLE6250G is designed to withstand the severe conditions of automotive applications and provides excellent EMC performance. Note: There are two versions available (refer to next page).
TLE6250
TLE6250G 5 V logic I/O version: RxD, TxD, INH, RM. Two Control pins (RM, INH) and 3 operation modes: Normal Mode, Stand-by Mode and Receive Only Mode. TLE6250GV33 3.3 V logic I/O version (logic I/O voltage adaptive to V33 pin within the range 3.3 V to 5 V): RxD, TxD, INH. One control pin (INH) and two operation modes: Normal Mode and Standby Mode. Pin Configuration
T L E6250 G
T xD GN D
1 2 3 4
8 7 6 5
AEP03320.VSD
IN H C AN H C AN L RM
V CC
R xD
Figure 1
T xD GN D
1 2 3 4
8 7 6 5
AEP03321.VSD
IN H C AN H C AN L
V CC
R xD
V 33 V
Figure 2
Data Sheet
TLE6250
Pin Definitions and Functions TLE6250G Symbol Function TxD GND CAN transmit data input; 20 k pull-up, LOW in dominant state Ground 5 V Supply input CAN receive data output; LOW in dominant state, integrated pull-up Receive-only input; control input, 20 k pull-up, set low to activate RxD-only mode Low line I/O; LOW in dominant state High line I/O; HIGH in dominant state Inhibit Input; control input, 20 k pull, set LOW for normal mode
VCC
RxD RM CANL CANH INH
Pin Definitions and Functions TLE6250GV33 Symbol Function TxD GND CAN transmit data input; 20 k pull-up, LOW in dominant state Ground 5 V Supply input CAN receive data output; LOW in dominant state, integrated pull-up Logic supply input; 3.3 V OR 5 V microcontroller logic supply can be connected here! The digital I/Os of the TLE6250GV33 adopt to the connected microcontroller logic supply at V33V Low line I/O; LOW in dominant state High line I/O; HIGH in dominant state Inhibit Input; control input, 20 k pull, set LOW for normal mode
VCC
RxD
V33V
6 7 8
Data Sheet
TLE6250
TL E6250 G
VCC
C AN H C AN L
7 6 Output Stage
T xD
8 5
IN H RM
R eceiver
*
GN D
R xD
Figure 3
Data Sheet
TLE6250
TL E6250 GV33
3 5
VCC V33
C AN H C AN L
7 6 Output Stage
T xD
IN H
R eceiver
*
GN D
R xD
Figure 4
Data Sheet
TLE6250
Application Information
TLE6250G
Normal Mode INH = 0 INH = 0 and RM = 1 INH = 0 and RM = 0 INH = 1 RM = 1 RM = 1
INH = 1
RM = 0
INH = 0
TLE6250GV33
Figure 5
Both, the TLE6250G as well as the TLE6250C offer three different operation modes (see Figure 5), controlled by the INH and RM pin. The TLE6250GV33 offers only two modes, controlled by the INH (GV33) pin respectively.
Data Sheet
TLE6250
In the normal mode the device is able to receive and to transmit messages whereas in the receive-only mode signals at the TxD input are not transmitted to the CAN bus. The receive-only mode can be used for diagnostic purposes (to check the bus connections between the nodes) as well as to prevent the bus being blocked by a faulty permanent dominant TxD input signal. The stand-by mode is a low power mode that disables both, the receiver as well as the transmitter. In case the receive-only feature is not used the RM pin has to be left open. When the stand-by mode is not used the INH pin has to be connected to ground level in order to switch the TLE6250G in normal mode. Application Information for the 3.3 V Versions The TLE6250GV33 can be used for both; 3.3 V and 5 V microcontroller logic supply, as shown in Figure 6. Dont apply external resistors between the power supply and this pin. This may cause a voltage drop and so reduce the available voltage at this pin.
Data Sheet
TLE6250
GN D 2
5V 3 .3 V + 22 F + 22 F
AEA 03300 .VSD
GN D 2
e. g. T LE 4270 VI + 22 F 100 nF GN D VQ 5V + 22 F
AEA 03299 .VSD
Figure 6
Data Sheet
10
TLE6250
Application with separate 5V power supplies, for applications with switchable transceiver supply
TL E6250 GV 33 IN H 7 6 C AN H C AN L R xD TxD V 33 V V CC 8 4 1 5 3 100 nF 100 nF GN D 5V P
GN D 2
e. g. T LE 4270 VI + 22 F 100 nF GN D VQ 5V + 22 F
e. g. T LE 4270 VI + 22 F 100 nF GN D VQ 5V +
AEA 13299 .VSD
Figure 6 (cont.) Application Circuits TLE6250GV33 Used for 3.3 V and 5 V Logic
Data Sheet
11
TLE6250
Electrical Characteristics TLE6250G (5 V version) Table 3 Parameter Voltages Supply voltage CAN input voltage (CANH, CANL) Logic voltages at INH, RM, TxD, RxD Electrostatic discharge voltage at CANH, CANL Electrostatic discharge voltage Temperatures Junction temperature Absolute Maximum Ratings Symbol Limit Values Min. Max. 6.5 40 V V V kV kV 0 V < VCC < 5.5 V human body model (100 pF via 1.5 k) human body model (100 pF via 1.5 k) Unit Remarks
VCC
6 2
Tj
-40
160
Note: Maximum ratings are absolute ratings; exceeding any one of these values may cause irreversible damage to the integrated circuit. Table 4 Parameter Supply voltage Junction temperature Thermal Resistances Junction ambient Thermal shutdown temperature Operating Range Symbol Limit Values Min. Max. 5.5 150 185 200 V C K/W C 10 C hysteresis 4.5 -40 160 Unit Remarks
Data Sheet
12
TLE6250
Table 5
Electrical Characteristics
4.5 V < VCC < 5.5 V; RL = 60 ; VINH < VINH,ON; -40 C < Tj < 150 C; all voltages with respect to ground; positive current flowing into pin; unless otherwise specified. Parameter Current Consumption Current consumption Current consumption Current consumption Current consumption Receiver Output RxD HIGH level output current LOW level output current Transmission Input TxD HIGH level input voltage threshold LOW level input voltage threshold TxD pull-up resistance Inhibit Input (pin INH) HIGH level input voltage threshold LOW level input voltage threshold INH pull-up resistance Symbol Limit Values Min. Typ. Max. Unit Remarks
6 45 6 1
10 70 10 10
mA mA mA A
recessive state; VTxD = VCC dominant state; VTxD = 0 V receive-only mode; RM = low stand-by mode; TxD = RM = high
IRD,H IRD,L
-4 4
-2
mA mA
VRD = 0.8 VCC, Vdiff < 0.4 V1) VRD = 0.2 VCC, Vdiff > 1 V1)
recessive state dominant state stand-by mode; normal mode
0.5 0.7 V
VCC VCC
10
VCC
V k
0.3 0.4
VCC
25 50
0.5 0.7 V
VCC VCC
10
VCC
V k
0.3 0.4
VCC
25 50
Data Sheet
13
TLE6250
Table 5
4.5 V < VCC < 5.5 V; RL = 60 ; VINH < VINH,ON; -40 C < Tj < 150 C; all voltages with respect to ground; positive current flowing into pin; unless otherwise specified. Parameter Symbol Limit Values Min. Typ. Max. Receive only Input (pin RM) (5 V version only) HIGH level input voltage threshold LOW level input voltage threshold RM pull-up resistance Bus Receiver Differential receiver threshold voltage, recessive to dominant edge Differential receiver threshold voltage dominant to recessive edge Common Mode Range Differential receiver hysteresis CANH, CANL input resistance Differential input resistance Unit Remarks
0.5 0.7 V
normal mode; receive-only mode -20 V < (VCANH, VCANL) < 25 V Vdiff = VCANH - VCANL -20 V < (VCANH, VCANL) < 25 V Vdiff = VCANH - VCANL
VCC VCC
10
VCC
V k
0.3 0.4
VCC
25 50
0.75 0.90 V
Vdiff,r
0.50 0.60
CMR
-20 10 20
150 20 40
25 30 60
V mV k k
VCC = 5 V
recessive state recessive state
Vdiff,hys Ri Rdiff
Data Sheet
14
TLE6250
Table 5
4.5 V < VCC < 5.5 V; RL = 60 ; VINH < VINH,ON; -40 C < Tj < 150 C; all voltages with respect to ground; positive current flowing into pin; unless otherwise specified. Parameter Bus Transmitter CANL/CANH recessive output voltage CCANH, CANL recessive output voltage difference Vdiff = VCANH - VCANL, no load2) CANL dominant output voltage CANH dominant output voltage CANH, CANL dominant output voltage difference Vdiff = VCANH - VCANL Symbol Limit Values Min. Typ. Max. Unit Remarks
VCANL/H Vdiff
0.4
0.6 V
VCC
-1
VCC
0.05 V
2.8 1.5
2.0 3.0
V V V
VTxD = 0 V; VCC = 5 V VTxD = 0 V; VCC = 5 V VTxD = 0 V; VCC = 5 V VCANLshort = 18 V VCANLshort = 36 V VCANHshort = 0 V VCANHshort = -5 V VCC = 0 V, VCANH = VCANL = -7 V VCC = 0 V, VCANH = VCANL = -2 V VCC = 0 V, VCANH = VCANL = 7 V VCC = 0 V, VCANH = VCANL = 2 V
CANL short circuit current ICANLsc CANH short circuit current ICANHsc CANH short circuit current ICANHsc Output current
50 -50 -50
120 150
200
mA mA mA mA
ICANH,lk
Output current
ICANH,lk
50 50
Data Sheet
15
TLE6250
Table 5
4.5 V < VCC < 5.5 V; RL = 60 ; VINH < VINH,ON; -40 C < Tj < 150 C; all voltages with respect to ground; positive current flowing into pin; unless otherwise specified. Parameter Symbol Limit Values Min. Typ. Max. Dynamic CAN-Transceiver Characteristics Propagation delay TxD-to- td(L),TR RxD LOW (recessive to dominant) Propagation delay TxD-to- td(H),TR RxD HIGH (dominant to recessive) Propagation delay TxD LOW to bus dominant Propagation delay TxD HIGH to bus recessive Propagation delay bus dominant to RxD LOW 150 280 ns Unit Remarks
150
280
ns
td(L),T
100
140
ns
td(H),T
100
140
ns
td(L),R
50
140
ns
td(H),R
50
140
ns
CL = 47 pF; RL = 60 ; VCC = 5 V; CRxD = 20 pF CL = 47 pF; RL = 60 ; VCC = 5 V; CRxD = 20 pF CL = 47 pF; RL = 60 ; VCC = 5 V CL = 47 pF; RL = 60 ; VCC = 5 V CL = 47 pF; RL = 60 ; VCC = 5 V; CRxD = 20 pF CL = 47 pF; RL = 60 ; VCC = 5 V; CRxD = 20 pF
Data Sheet
16
TLE6250
Electrical Characteristics TLE6250GV33 (3.3 V version) Table 6 Parameter Voltages Supply voltage 3.3 V supply CAN input voltage (CANH, CANL) Logic voltages at INH, RM, TxD, RxD Electrostatic discharge voltage at CANH, CANL Electrostatic discharge voltage Temperatures Junction temperature Absolute Maximum Ratings Symbol Limit Values Min. Max. 6.5 6.5 40 V V V V kV kV 0 V < VCC < 5.5 V human body model (100 pF via 1.5 k) human body model (100 pF via 1.5 k) Unit Remarks
VCC
6 2
Tj
-40
160
Note: Maximum ratings are absolute ratings; exceeding any one of these values may cause irreversible damage to the integrated circuit. Table 7 Parameter Supply voltage 3.3 V supply voltage Junction temperature Thermal Resistances Junction ambient Thermal shutdown temperature Operating Range Symbol Limit Values Min. Max. 5.5 5.5 150 185 200 V V C K/W C 10 C hysteresis 4.5 3.0 -40 160 Unit Remarks
Data Sheet
17
TLE6250
Table 8
Electrical Characteristics
4.5 V < VCC < 5.5 V; (3.0 V < V33V < 5.5V for 3.3 V version); RL = 60 ; VINH < VINH,ON; -40 C < Tj < 150 C; all voltages with respect to ground; positive current flowing into pin; unless otherwise specified. Parameter Symbol Limit Values Min. Current Consumption (3.3 V version) Current consumption Current consumption Current consumption Current consumption Receiver Output RxD HIGH level output current LOW level output current HIGH level input voltage threshold LOW level input voltage threshold Inhibit Input (pin INH) HIGH level input voltage threshold LOW level input voltage threshold Typ. 6 45 1 Max. 10 70 2 10 mA mA mA A recessive state; Unit Remarks
ICC+33V ICC+33V
VTxD = V33V
dominant state; VTxD = 0 V stand-by mode, TxD = high
I33V ICC+33V,stb
IRD,H IRD,L
-2 2
-1
mA mA
VRD = 0.8 V33V, Vdiff < 0.4 V1) VRD = 0.2 V33V, Vdiff > 1 V1)
recessive state dominant state stand-by mode; normal mode;
VTD,H VTD,L
0.3
0.55 0.7
V V k V V k
V33V V33V
10 0.3
V33V
0.45
V33V
25 50
VINH,H VINH,L
0.55 0.7
V33V V33V
10
V33V
0.45
V33V
25 50
Data Sheet
18
TLE6250
Table 8
4.5 V < VCC < 5.5 V; (3.0 V < V33V < 5.5V for 3.3 V version); RL = 60 ; VINH < VINH,ON; -40 C < Tj < 150 C; all voltages with respect to ground; positive current flowing into pin; unless otherwise specified. Parameter Bus Receiver Differential receiver Vdiff,d threshold voltage, recessive to dominant edge Differential receiver Vdiff,r threshold voltage, dominant to recessive edge Common Mode Range CMR Differential receiver hysteresis CANH, CANL input resistance Differential input resistance 0.75 0.90 V -20 V < (VCANH, VCANL) < 25 V Vdiff = VCANH - VCANL -20 V < (VCANH, VCANL) < 25 V Vdiff = VCANH - VCANL Symbol Limit Values Min. Typ. Max. Unit Remarks
0.50
0.60
-20 10 20
150 20 40
25 30 60
V mV k k
VCC = 5 V
recessive state recessive state
Vdiff,hys Ri Rdiff
Data Sheet
19
TLE6250
Table 8
4.5 V < VCC < 5.5 V; (3.0 V < V33V < 5.5V for 3.3 V version); RL = 60 ; VINH < VINH,ON; -40 C < Tj < 150 C; all voltages with respect to ground; positive current flowing into pin; unless otherwise specified. Parameter Bus Transmitter CANL/CANH recessive output voltage CANH, CANL recessive output voltage difference Vdiff = VCANH - VCANL, no load2) CANL dominant output voltage CANH dominant output voltage CANH, CANL dominant output voltage difference Vdiff = VCANH - VCANL CANL short circuit current CANH short circuit current CANH short circuit current Output current Symbol Limit Values Min. Typ. Max. 0.6 V Unit Remarks
VCANL/H
0.4
VTxD = V33V
VCC Vdiff
-1
VCC
0.05 V
VTxD = V33V
2.8 1.5
2.0 3.0
V V V
mA mA mA mA A A A A
VCANLshort = 18 V VCANLshort = 36 V VCANHshort = 0 V VCANHshort = -5 V VCC = 0 V, VCANH = VCANL = -7 V VCC = 0 V, VCANH =VCANL = -2 V VCC = 0 V, VCANH = VCANL = 7 V VCC = 0 V, VCANH = VCANL = 2 V
Rev. 3.9, 2007-08-22
Output current
ICANH,lk
50 50
Data Sheet
20
TLE6250
Table 8
4.5 V < VCC < 5.5 V; (3.0 V < V33V < 5.5V for 3.3 V version); RL = 60 ; VINH < VINH,ON; -40 C < Tj < 150 C; all voltages with respect to ground; positive current flowing into pin; unless otherwise specified. Parameter Symbol Limit Values Min. Propagation delay TxD-to-RxD LOW (recessive to dominant) Propagation delay TxD-to-RxD HIGH (dominant to recessive) Propagation delay TxD LOW to bus dominant Propagation delay TxD HIGH to bus recessive Typ. 150 Max. 280 ns Unit Remarks
td(L),TR
td(H),TR
150
280
ns
td(L),T
100
140
ns
td(H),T
100
140
ns
50
140
ns
50
140
ns
CL = 47 pF; RL = 60 ; VCC = 5 V; CRxD = 20 pF CL = 47 pF; RL = 60 ; VCC = 5 V; CRxD = 20 pF CL = 47 pF; RL = 60 ; VCC = 5 V CL = 47 pF; RL = 60 ; VCC = 5 V CL = 47 pF; RL = 60 ; VCC = 5 V; CRxD = 20 pF CL = 47 pF; RL = 60 ; VCC = 5 V; CRxD = 20 pF
Data Sheet
21
TLE6250
Diagrams
8 1 5
4 20 pF 3 100 nF
AEA03328.VSD
5V
Figure 7
5V
Figure 8
Data Sheet
22
TLE6250
VTxD VCC(33V)
GND
VDIFF
td(L), T
td(H), T
td(L), R
td(H), R
td(L), TR
td(H), TR
t
AET02926
Figure 9
Data Sheet
23
TLE6250
Application
120 V Bat C AN Bus 7 6 T L E6250 G RM IN H C AN H C AN L GN D 2 e. g . T LE 4270 VI + 22 F 100 nF GN D VQ 5V + 22 F EC U 1 R xD T xD V CC 5 8 4 1 3 100 nF 100 nF GN D P
V CC
5V 3.3 V + + 22 F EC U X
AEA03308.VSD
120
Figure 10
Data Sheet
24
TLE6250
Package Outlines
0.35 x 45 4 -0.2 1) C
1.75 MAX.
0.19 +0.06
6 0.2
0.1 A B 8x
8 MAX.
C 8x
GPS01181
1) Does not include plastic or metal protrusion of 0.15 max. per side 2) Lead width can be 0.61 max. in dambar area
Figure 11
Green Product (RoHS compliant) To meet the world-wide customer requirements for environmentally friendly products and to be compliant with government regulations the device is available as a green product. Green products are RoHS-Compliant (i.e Pb-free finish on leads and suitable for Pb-free soldering according to IPC/JEDEC J-STD-020).
You can find all of our packages, sorts of packing and others in our Infineon Internet Page Products: http://www.infineon.com/products. SMD = Surface Mounted Device Data Sheet 25 Dimensions in mm Rev. 3.9, 2007-08-22
TLE6250 Revision History: Page All Page 2 Page 3 2007-08-22 Rev. 3.9
Previous Version:Rev. 3.8 (Data Sheet) RoHS-compliant version of the TLE6250G and TLE6250GV33 Infineon logo updated updated Legal Disclaimer added AEC qualified and RoHS logo, Green Product (RoHS compliant) and AEC qualified statement added to feature list, package name changed to RoHS compliant versions, package picture updated, ordering code removed Package name changed to RoHS compliant versions, Green Product description added Changed package drawing to GPS01181 updated Revision History
Page 25
Page 26