Professional Documents
Culture Documents
Purpose
(1) To digitize and plot the pump performance curves and to obtain the equation-fit coefficients
(2) To avoid data duplication and to maintain one data source for each pump
5
A
A
5.1
Tab [ Input] :
Enter new data as required. All grey cells are required inputs. NPSH data is an optional input and may be added on th
of columns on the input tab.
5.2
Enter the performance data in the new block under following heading
Data Point
GPM
TDH
BHP
Efficiency
RPM
GPM
NPSH
RPM
GPM
TDH
RPM
B
5.3
NPSH and Lift test Data (if plotted) must be entered with minimum 4 points
The shut-off capacity (zero capacity) is entered as a small positive number (1.e
A minimum of (6) data points are required for TDH or BHP curves.
All data must fill-in the last rows designated for data input - the last row must co
In other words if only 8 points are entered in 10-points field for Head, BHP, or E
the first point is entered in the third row.
Similarly for NPSH and Lift Head Data which are entered in a table of 6 (instead
Tab [Curves] :
This tab needs an updated only if new input blocks were copied&pasted in the Input tab.
If a new block must be added to this tab to accommodate new blocks in the Input tab then copy&paste an existing block
This will require update only on the links of the series in the newly created graphs to point to the corresponding new ser
No other update is necessary.
Note that LINEST function for obtaining the coefficients of the curves does not require any update as it is span over the
(for Head, BHP and Eff.) and over the last 4 points for (NPSH and Lift test) which are the minimum required number of
5.4
5.5
5.6
Write the owner name (your name if you have entered or corrected the data) in each block of the data.
To copy coefficients to a pump's CAP Tabular Data file, refer to columns AK:AZ. Coefficients in these columns are pro
copied and pasted in the CAP Tabular Data file.
it coefficients
etitive analysis
ers in NPSH and Lift Test Head Calculation
up points selection
hlighted portion)
o Tchavdarov (AP).
ates require to unlock them.
Instructions; Copy&past the Test Report as shown below or enter data from curves .
Print/Enter data at nominal RPM and Head in feet !!
Leave four empty lines on the top of each record:
To insert new data insert 30 empty rows in Log and Test tabs . Then copy&paste tables and graphs in L
Test No
THE DURIRON COMPANY -
Owner
Date:
7/2/2010
Serial No:
Descript.
Customer
Pump Size
Disch/Suc. ID
2k3x2-8
DURO MARK III
3.000
2.000
Impeller Dia.
8.188
Pump Model
OK!
Stages
Data Point
GPM
0.00
20.00
50.00
100.00
120.00
140.00
150.00
180.00
1
2
3
4
5
6
7
TDH (feet)
31.00
31.00
30.90
27.80
25.13
22.00
20.00
13.00
BHP
0.52
0.62
0.78
1.05
1.14
1.23
1.27
1.41
( 100 x % )
Efficiency
#DIV/0!
#DIV/0!
0.00
25.25
50.08
66.86
67.07
63.23
59.70
41.91
OK!
OK!
OK!
RPM
1150
1150
1150
1150
1150
1150
1150
1150
1150
1150
BHP
9.317E-08
-3.741E-05
9.367E-03
TDH
-4.700E-07
-7.780E-04
6.190E-02
Eff.
-6.325E-06
-2.886E-03
8.786E-01
x1=
-4.156E+02
BEP
RPM
1150
x2=
GPM
TDH (feet)
111.4
26.4
OK!
OK!
Test No
Owner
Date:
7/2/2010
Serial No:
Descript.
Customer
Pump Size
Disch/Suc. ID
2k3x2-8
DURO MARK III
3.000
2.000
Impeller Dia.
8.000
Pump Model
Data Point
OK!
1
GPM
TDH (feet)
BHP
( 100 x % )
Efficiency
#DIV/0!
#DIV/0!
OK!
OK!
OK!
RPM
1150
1150
BHP
-4.185E-08
8.012E-06
4.360E-03
TDH
-3.183E-06
3.582E-05
-1.933E-02
0.00
20.00
50.00
70.00
100.00
120.00
150.00
172.00
1
2
3
4
5
6
7
8
29.00
29.00
28.99
27.86
25.50
23.00
17.28
11.80
0.48
0.58
0.73
0.82
0.98
1.06
1.19
1.27
0.00
25.25
50.14
60.06
66.00
65.80
55.15
40.36
1150
1150
1150
1150
1150
1150
1150
1150
Eff.
-5.896E-06
-3.731E-03
x1=
-5.277E+02
RPM
1150
BEP
9.872E-01
x2=
GPM
TDH (feet)
105.8
24.8
OK!
OK!
Test No
THE DURIRON COMPANY -
Owner
Date:
7/2/2010
Serial No:
Descript.
Customer
Pump Size
Disch/Suc. ID
2k3x2-8
DURO MARK III
3.000
2.000
Impeller Dia.
7.500
Pump Model
OK!
Stages
OK!
OK!
OK!
Data Point
1
2
3
4
5
6
7
8
9
10
GPM
TDH (feet)
0.00
20.00
40.00
60.00
80.00
100.00
120.00
130.00
140.00
152.00
24.00
24.00
24.00
23.70
22.00
20.20
17.80
15.70
13.32
9.90
BHP
0.40
0.47
0.56
0.64
0.74
0.82
0.88
0.91
0.94
0.95
( 100 x % )
Efficiency
0.00
25.79
43.29
56.11
60.07
62.21
60.98
56.64
50.09
40.00
RPM
1150
1150
1150
1150
1150
1150
1150
1150
1150
1150
BHP
-1.811E-07
4.168E-05
8.092E-04
TDH
-1.271E-05
2.610E-03
-2.441E-01
Eff.
-6.135E-05
1.250E-02
-6.247E-01
x1=
3.300E+01
BEP
RPM
1150
x2=
GPM
TDH (feet)
102.9
20.0
OK!
OK!
Test No
Owner
Date:
7/2/2010
Serial No:
Descript.
Customer
Pump Size
Pump Model
Disch/Suc. ID
2k3x2-8
DURO MARK III
3.000
2.000
Impeller Dia.
7.000
OK!
Stages
OK!
OK!
OK!
Data Point
1
2
3
4
5
6
7
8
9
10
GPM
TDH (feet)
0.0001
10.00
20.00
40.00
60.00
80.00
100.00
120.00
130.00
140.00
20.00
20.50
21.00
20.00
19.70
17.70
15.28
11.84
10.00
8.00
BHP
0.35
0.38
0.40
0.48
0.55
0.60
0.65
0.69
0.69
0.70
( 100 x % )
Efficiency
0.00
13.62
26.52
42.09
54.27
59.60
59.21
51.89
47.58
40.40
RPM
1150
1150
1150
1150
1150
1150
1150
1150
1150
1150
BHP
-2.450E-07
5.626E-05
TDH
5.024E-07
-9.918E-04
3.616E-02
Eff.
9.057E-06
-9.940E-03
1.530E+00
x1=
6.442E+02
RPM
1150
BEP
-1.661E-03
x2=
GPM
TDH (feet)
87.4
16.9
OK!
OK!
Test No
THE DURIRON COMPANY -
Owner
Date:
7/2/2010
Serial No:
Descript.
Customer
Pump Size
Disch/Suc. ID
2k3x2-8
DURO MARK III
3.000
2.000
Impeller Dia.
6.500
Pump Model
OK!
Stages
OK!
OK!
OK!
Data Point
GPM TDH (feet)
0.00001
17.6
1
20.00
17.50
2
30.00
17.40
3
40.00
17.10
4
60.00
16.00
5
80.00
14.00
6
100.00
11.56
7
110.00
10.00
8
120.00
7.69
9
125.00
10
6.50
Test No
Owner
( 100 x % )
BHP Efficiency
0.32
0.00
24.55
0.36
34.69
0.38
43.18
0.40
56.38
0.43
57.72
0.49
55.39
0.527
50.88
0.55
41.82
0.56
36.64
0.56
RPM
1150
1150
1150
1150
1150
1150
1150
1150
1150
1150
BHP
8.572E-08
-4.322E-05
7.717E-03
TDH
-2.163E-05
4.702E-03
-4.383E-01
Eff.
-1.482E-04
3.091E-02 -2.065E+00
x1=
BEP
OK!
OK!
RPM
1150
5.575E+01
x2=
GPM
TDH (feet)
83.3
13.7
Date:
7/2/2010
Serial No:
Descript.
Customer
Pump Size
Disch/Suc. ID
2k3x2-8
DURO MARK III
3.000
2.000
Impeller Dia.
6.000
Pump Model
OK!
Stages
OK!
OK!
OK!
Data Point
GPM TDH (feet)
0.00001
14.8
1
10.00
14.80
2
20.00
14.80
3
30.00
14.60
4
40.00
14.00
5
50.00
13.99
6
60.00
13.50
7
80.00
11.02
8
100.00
7.70
9
112.00
10
5.70
( 100 x % )
BHP Efficiency
0.26
1.437E-05
0.27
0.30
0.31
0.33
0.35
0.380
0.40
0.42
0.44
13.84
24.92
35.68
42.85
49.77
53.83
55.95
46.74
36.64
RPM
1150
1150
1150
1150
1150
1150
1150
1150
1150
1150
BHP
5.767E-07
-1.396E-04
TDH
2.126E-05
-6.218E-03
4.342E-01
Eff.
-1.289E-05
-9.759E-03
1.636E+00
x1=
-5.781E+02
RPM
1150
BEP
1.202E-02
x2=
GPM
TDH (feet)
73.2
12.0
OK!
OK!
Test No
Owner
Date:
7/2/2010
Serial No:
Descript.
Customer
Pump Size
Disch/Suc. ID
2k3x2-8
DURO MARK III
3.000
2.000
Impeller Dia.
5.500
Pump Model
OK!
Stages
OK!
OK!
OK!
Data Point
GPM TDH (feet)
0.00001
11.8
1
20.00
11.90
2
30.00
11.80
3
40.00
11.20
4
50.00
10.90
5
60.00
9.95
6
70.00
8.96
7
80.00
7.68
8
( 100 x % )
BHP Efficiency
0.22
1.354E-05
0.25
0.26
0.27
0.28
0.29
0.30
0.31
24.04
34.38
41.90
50.05
52.71
52.27
50.05
RPM
1150
1150
1150
1150
1150
1150
1150
1150
BHP
-3.796E-07
7.060E-05
-3.037E-03
TDH
-1.537E-05
2.030E-03
-1.735E-01
Eff.
-1.141E-04
8.439E-03
3.593E-01
x1=
-1.606E+01
BEP
RPM
1150
x2=
GPM
TDH (feet)
65.4
9.4
90.00
100.00
9
10
5.99
4.00
0.32
0.32
42.54
31.57
1150 OK!
1150 OK!
Test No
THE DURIRON COMPANY -
Owner
Date:
7/2/2010
Serial No:
Descript.
Customer
Pump Size
Disch/Suc. ID
2k3x2-8
DURO MARK III
3.000
2.000
Impeller Dia.
5.000
Pump Model
OK!
Stages
OK!
OK!
OK!
Data Point
GPM TDH (feet)
0.00001
8.9
1
10.00
8.90
2
20.00
8.80
3
30.00
8.40
4
40.00
8.00
5
50.00
7.86
6
60.00
7.01
7
70.00
5.82
8
80.00
4.49
9
92.00
10
3.00
( 100 x % )
BHP Efficiency
0.16
1.405E-05
0.17
0.18
0.19
0.19
0.21
0.222
0.22
0.23
0.27
13.22
24.69
33.49
42.09
46.46
47.89
46.35
39.93
25.81
RPM
1150
BHP
1150
TDH
1150
Eff.
1150
1150
1150
1150
1150
BEP
1150 OK!
1150 OK!
2.279E-06
-4.363E-04
2.777E-02
4.069E-05
-9.289E-03
5.707E-01
-1.363E-04
7.098E-03
6.232E-01
x1=
-2.537E+01
RPM
1150
x2=
GPM
TDH (feet)
60.1
7.0
Test No
Owner
Date:
7/1/2010
Serial No:
Descript.
Customer
Pump Size
Pump Model
Disch/Suc. ID
2k3x2-8
DURO MARK III
2.000
1.000
Impeller Dia.
Filing Tip Work
Stages
Data Point
( 100 x % )
BHP Efficiency
#VALUE!
#VALUE!
#VALUE!
RPM
#DIV/0!
BHP
#VALUE!
#VALUE!
#VALUE!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
TDH
#VALUE!
#VALUE!
#VALUE!
Eff.
#VALUE!
#VALUE!
#VALUE!
x1=
BEP
RPM
0
#VALUE!
GPM
x2=
TDH (feet)
#VALUE! #VALUE!
#VALUE!
#VALUE!
10
Test No
Owner
Date:
7/1/2010
Serial No:
Descript.
Customer
Pump Size
Pump Model
Disch/Suc. ID
2k2*1-10A
DURO MARK III
2.000
1.000
Impeller Dia.
Filing Tip Work
Stages
Data Point
( 100 x % )
BHP Efficiency
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#VALUE!
#VALUE!
#VALUE!
RPM
3500
BHP
3500
TDH
3500
Eff.
3500
3500
3500
3500
3500
BEP
3500 #VALUE!
3500 #VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
x1=
RPM
3500
#VALUE!
GPM
x2=
TDH (feet)
#VALUE! #VALUE!
CHECK FOR HIDDEN TABLES ABOVE THIS LINE! - Unhide Tables for overwriting them with new actu
Optional Inputs
gauge_h
P_barom.: 34.3
Head - ft
0.00
0.00
0.00
0.00
0.00
0.00
0.00
Data Point
1
2
3
4
5
6
GPM
40.7
52.7
93.1
125.6
145.3
169.3
NPSH
RPM
0.5
1.5
1.0
1.5
2.0
3.0
1150
1150
1150
1150
1150
1150
0.5
40.68
52.72
93.06
125.57
145.33
169.28
0.50
1.50
1.00
1.50
2.00
3.00
No warning
No warning
`
Lift test No
it Coefficients
gpm
C heck-up !
% Error
3.926E-01
150
1.3
0.11%
2.981E+01
150
20.0
0.03%
1.416E+01
150
59.7
-0.05%
Data Point
GPM
TDH
RPM
0.00%
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
0.00%
1.114E+02
Max error:
BHP
% Eff.
1.1
67.5
0.11%
NPSH
gauge_h
P_barom.: 34.3
Head - ft
0.00
0.00
0.00
0.00
0.00
0.00
0.00
Data Point
1
2
3
4
5
6
GPM
41.3
52.0
93.7
126.9
142.4
167.1
No warning
No warning
NPSH
RPM
0.5
1.5
1.0
1.5
2.0
3.0
1150
1150
1150
1150
1150
1150
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
0.5
41.32
51.95
93.70
126.91
142.42
167.07
0.50
1.50
1.00
1.50
2.00
3.00
`
Lift test No
it Coefficients
gpm
C heck-up !
% Error
4.952E-01
150
1.2
0.12%
3.022E+01
150
17.4
0.61%
Data Point
GPM
TDH
RPM
1.096E+01
150
55.2
0.05%
0.00%
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
0.00%
1.058E+02
Max error:
BHP
% Eff.
1.0
66.7
0.61%
NPSH
P_barom.: 34.3
gauge_h
Head - ft
0.00
0.00
0.00
0.00
0.00
0.00
0.00
Data Point
1
2
3
4
5
6
GPM
41.7
50.9
92.8
125.3
132.3
138.0
NPSH
RPM
0.5
0.5
1.0
1.5
1.8
2.0
1150
1150
1150
1150
1150
1150
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
0.5
41.69
50.93
92.79
125.32
132.35
138.00
0.50
0.50
1.00
1.50
1.75
2.00
No warning
No warning
`
Lift test No
it Coefficients
gpm
C heck-up !
% Error
5.016E-01
140
0.9
-0.54%
3.132E+01
140
13.4
0.64%
6.136E+01
140
50.6
0.99%
Data Point
GPM
TDH
RPM
0.00%
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
0.00%
1.029E+02
Max error:
BHP
% Eff.
0.8
62.6
0.99%
NPSH
P_barom.: 34.3
gauge_h
Head - ft
0.00
0.00
0.00
0.00
0.00
0.00
0.00
Data Point
1
2
3
4
5
6
GPM
28.7
46.5
89.0
120.1
125.1
131.4
No warning
NPSH
RPM
0.5
0.5
1.0
1.5
1.8
2.0
1150
1150
1150
1150
1150
1150
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
0.5
28.73
46.48
89.03
120.13
125.06
131.42
0.50
0.50
1.00
1.50
1.75
2.00
No warning
`
Lift test No
it Coefficients
gpm
C heck-up !
% Error
0.90%
4.996E-01
130
0.7
2.097E+01
130
10.0
0.17%
-3.740E+00
130
47.1
-0.99%
Data Point
GPM
TDH
RPM
0.00%
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
0.00%
8.742E+01
Max error:
BHP
% Eff.
0.6
60.1
0.99%
NPSH
P_barom.: 34.3
gauge_h
Head - ft
0.00
0.00
0.00
0.00
0.00
0.00
0.00
Data Point
1
2
3
4
5
6
GPM
26.4
42.8
83.9
111.5
117.8
124.9
NPSH
RPM
0.5
0.5
1.0
1.5
1.8
2.0
1150
1150
1150
1150
1150
1150
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
0.5
26.45
42.78
83.91
111.46
117.82
124.87
0.50
0.50
1.00
1.50
1.75
2.00
No warning
No warning
`
Lift test No
it Coefficients
gpm
C heck-up !
% Error
1.043E-01
120
0.6
-0.20%
3.005E+01
120
7.8
0.99%
1.010E+02
120
42.2
0.98%
Data Point
GPM
TDH
RPM
0.00%
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
0.00%
8.330E+01
Max error:
BHP
% Eff.
0.5
57.8
0.99%
NPSH
P_barom.: 34.3
gauge_h
0.5
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
Head -Psi
Head - ft
0.00
0.00
0.00
0.00
0.00
0.00
0.00
Data Point
1
2
3
4
5
6
GPM
24.2
39.1
59.7
77.4
89.4
103.5
NPSH
RPM
GPM (Nom)
NPSH
0.5
0.5
0.8
1.0
1.3
1.5
1150
1150
1150
1150
1150
1150
24.18
39.09
59.67
77.38
89.41
103.53
0.50
0.50
0.75
1.00
1.25
1.50
No warning
No warning
`
Lift test No
it Coefficients
gpm
C heck-up !
% Error
3.449E-02
100
0.4
0.22%
5.209E+00
100
7.7
0.01%
-6.137E+00
100
47.0
0.48%
Data Point
GPM
TDH
RPM
0.00%
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
0.00%
7.320E+01
Max error:
BHP
% Eff.
0.4
56.3
0.48%
NPSH
P_barom.: 34.3
gauge_h
Head - ft
0.00
0.00
0.00
0.00
0.00
0.00
0.00
Data Point
1
2
3
4
5
6
GPM
21.2
33.3
50.3
70.9
80.8
92.1
NPSH
RPM
0.5
0.5
0.8
1.0
1.3
1.5
1150
1150
1150
1150
1150
1150
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
0.5
21.19
33.28
50.30
70.86
80.75
92.08
0.50
0.50
0.75
1.00
1.25
1.50
No warning
No warning
`
Lift test No
it Coefficients
gpm
C heck-up !
% Error
2.975E-01
90
0.3
-0.24%
1.641E+01
90
6.0
0.67%
2.527E+01
90
42.8
0.59%
Data Point
GPM
TDH
RPM
0.00%
0.00%
6.538E+01
Max error:
BHP
% Eff.
0.3
52.9
0.67%
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
NPSH
P_barom.: 34.3
gauge_h
Head - ft
0.00
0.00
0.00
0.00
0.00
0.00
0.00
Data Point
1
2
3
4
5
6
GPM
15.4
27.5
44.5
60.8
69.3
79.9
NPSH
RPM
0.5
0.5
0.8
1.0
1.3
1.5
1150
1150
1150
1150
1150
1150
#DIV/0!
#DIV/0!
0.5
15.36
27.45
44.49
60.80
69.30
79.92
0.50
0.50
0.75
1.00
1.25
1.50
No warning
No warning
`
Lift test No
it Coefficients
gpm
C heck-up !
% Error
-3.674E-01
80
0.2
0.75%
-2.564E+00
80
4.5
-0.34%
1.453E+01
80
40.0
0.23%
Data Point
GPM
TDH
RPM
0.00%
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
0.00%
6.008E+01
Max error:
BHP
% Eff.
0.2
48.0
0.75%
NPSH
P_barom.: 34.3
gauge_h
Head - ft
Data Point
0.00
0.00
0.00
0.00
0.00
0.00
0.00
GPM
NPSH
0.5
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
No warning
No warning
s are required !
it Coefficients
RPM
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
`
Lift test No
gpm
C heck-up !
% Error
Data Point
GPM
TDH
RPM
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
BHP
#VALUE!
#VALUE!
#VALUE!
#VALUE!
Max error:
#VALUE!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
% Eff.
#VALUE! #VALUE!
NPSH
P_barom.: 34.3
gauge_h
Head - ft
Data Point
0.00
0.00
0.00
0.00
0.00
0.00
0.00
GPM
NPSH
RPM
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
0.5
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
s are required !
`
Lift test No
it Coefficients
gpm
C heck-up !
% Error
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
BHP
#VALUE!
Max error:
#VALUE!
#VALUE! #VALUE!
GPM
TDH
RPM
#VALUE!
#VALUE!
% Eff.
Data Point
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
1150
1150
1150
1150
1150
1150
Gage_h
34.30
0.50
34.30
0.50
34.30
0.50
34.30
0.50
34.30
0.50
34.30
0.50
not used
in this template
velocity correction !
RPM(Nom)
1150
1150
1150
1150
1150
1150
1150
1150
1150
1150
1150
1150
velocity correction !
RPM(Nom)
Gage_h
34.30
0.50
34.30
0.50
34.30
0.50
34.30
0.50
34.30
0.50
34.30
0.50
not used
in this template
1150
1150
1150
1150
1150
1150
1150
1150
1150
1150
1150
1150
Gage_h
34.30
0.50
34.30
0.50
34.30
0.50
34.30
0.50
34.30
0.50
34.30
0.50
not used
in this template
velocity correction !
RPM(Nom)
1150
1150
1150
1150
1150
1150
1150
1150
1150
1150
1150
1150
34.30
34.30
34.30
34.30
34.30
34.30
not used
Gage_h
0.50
0.50
0.50
0.50
0.50
0.50
in this template
velocity correction !
RPM(Nom)
1150
1150
1150
1150
1150
1150
1150
1150
1150
1150
1150
1150
Gage_h
34.30
0.50
34.30
0.50
34.30
0.50
34.30
0.50
34.30
0.50
34.30
0.50
not used
in this template
velocity correction !
RPM(Nom)
1150
1150
1150
1150
1150
1150
RPM(Nom)
1150
1150
1150
1150
1150
1150
P_barom
Gage_h
34.30
0.50
34.30
0.50
34.30
0.50
34.30
0.50
34.30
0.50
34.30
0.50
not used
in this template
velocity correction !
RPM(Nom)
1150
1150
1150
1150
1150
1150
1150
1150
1150
1150
1150
1150
velocity correction !
RPM(Nom)
1150
1150
1150
1150
Gage_h
34.30
0.50
34.30
0.50
34.30
0.50
34.30
0.50
34.30
0.50
34.30
0.50
not used
in this template
1150
1150
1150
1150
1150
1150
1150
1150
Gage_h
34.30
0.50
34.30
0.50
34.30
0.50
34.30
0.50
34.30
0.50
34.30
0.50
not used
in this template
velocity correction !
RPM(Nom)
1150
1150
1150
1150
1150
1150
0
0
0
0
0
0
velocity correction !
RPM(Nom)
Gage_h
34.30
0.50
34.30
0.50
34.30
0.50
34.30
0.50
34.30
0.50
34.30
0.50
not used
in this template
0
0
0
0
0
0
3500
3500
3500
3500
3500
3500
velocity correction !
RPM(Nom)
3500
3500
3500
3500
3500
3500
Gage_h
34.30
0.50
34.30
0.50
34.30
0.50
34.30
0.50
34.30
0.50
34.30
0.50
not used
in this template
2.0
Efficiency Trim Coeff.: 0.15
NA
Company: THE DURIRON COMPANY
Date: RPM ratio: 1.000
Fire
Type:
Primary
Secondary
BEP
head
BEP out
1,042
111
67.5%
26
of range
Semi open,STD-A60,Max sphere 17/32,eye area 6.8sq
Disch.inch
ID: 3
Test No
Pump Size
Pump Model
Data Point
1
2
3
4
5
6
7
Efficiency
GPM
TDH
#N/A
#N/A
#N/A
25.3%
50.1%
66.9%
67.1%
63.2%
59.7%
41.9%
Lift Test:
#N/A
#N/A
#N/A
20.0
50.0
100.0
120.0
140.0
150.0
180.0
#N/A
#N/A
31.0
31.0
30.9
27.8
25.1
22.0
20.0
13.0
Data Point
GPM
NPSH
1
2
3
4
5
6
40.7
52.7
93.1
125.6
145.3
169.3
0.5
1.5
1.0
1.5
2.0
3.0
Imp. D
8.188
Lift Fact:
Pump Size
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
Efficiency
1
2
3
4
5
6
7
8
#N/A
#N/A
0.0%
25.3%
50.1%
60.1%
66.0%
65.8%
55.2%
40.4%
1150
BHP
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
RPM
#N/A
1,150
#N/A
1,150
#N/A
1,150
0.6
1,150
0.8
1,150
1.1
1,150
1.1
1,150
1.2
1,150
1.3
1,150
1.4
1,150
#VALUE! #VALUE!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
Pump Model
GPM
#N/A
#N/A
0.0
20.0
50.0
70.0
100.0
120.0
150.0
172.0
Imp. D
8.000
100
25
25
yy =
= 9.3173E-08x
-4.7004E-07x
150
100
50
0
0
RPM
Curve
BHP
Head
Efficiency
NPSH
Lift
#VALUE!
Overwrite old data with new on
2k3x2-8
35
150
17
17
68.3% PASS
Suction ID: 2.000
stages
N (rpm)
200
1,150
1,150
1,150
1,150
1,150
1,150
2.0
Efficiency Trim Coeff.: 0.15
NA
Company: THE DURIRON COMPANY
Date: RPM ratio: 1.000
Fire
Type:
Primary
Secondary
Data Point
250
150
18
20
72.1% PASS
Suction ID: 2.000
stages
N (rpm)
#VALUE! head-drop
GPM-lift
TDH (lift) V-Head Corr.
BEP
head
BEP out
1,064
106
66.7%
25
of range
Semi open,STD-A60,Max sphere 17/32,eye area 6.8sq
Disch.inch
ID: 3
Test No
100
28
28
Head (feet)
Lift Fact:
1150
TDH
BHP
RPM
#N/A
#N/A
29.0
29.0
29.0
27.9
25.5
23.0
17.3
11.8
#N/A
#N/A
0.5
0.6
0.7
0.8
1.0
1.1
1.2
1.3
1,150
1,150
1,150
1,150
1,150
1,150
1,150
1,150
1,150
1,150
30
25
Head (feet)
20
15
10
5
0
0
NPSH
1
2
3
4
5
6
41.3
52.0
93.7
126.9
142.4
167.1
0.5
1.5
1.0
1.5
2.0
3.0
Lift Fact:
#VALUE! head-drop
#VALUE! #VALUE!
GPM-lift
TDH (lift) V-Head Corr.
RPM
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
Pump Size
Pump Model
Imp. D
7.500
Data Point
Efficiency
GPM
TDH
1
2
3
4
5
6
7
8
9
10
0.0%
25.8%
43.3%
56.1%
60.1%
62.2%
61.0%
56.6%
50.1%
40.0%
Lift Test:
0.0
20.0
40.0
60.0
80.0
100.0
120.0
130.0
140.0
152.0
24.0
24.0
24.0
23.7
22.0
20.2
17.8
15.7
13.3
9.9
Data Point
GPM
NPSH
1
2
3
4
5
6
41.7
50.9
92.8
125.3
132.3
138.0
0.5
0.5
1.0
1.5
1.8
2.0
Lift Fact:
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
Pump Size
0
Data Point
1
2
100.0% PASS
Suction ID: 2.000
stages
N (rpm)
1150
BHP
RPM
0.4
1,150
0.5
1,150
0.6
1,150
0.6
1,150
0.7
1,150
0.8
1,150
0.9
1,150
0.9
1,150
0.9
1,150
1.0
1,150
#VALUE! #VALUE!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
0.0
10.0
Imp. D
7.000
BHP
Head
Efficiency
NPSH
Lift
#VALUE!
Overwrite old data with new on
2k3x2-8
35
30
25
5
0
0
RPM
Curve
BHP
Head
Efficiency
NPSH
Lift
100.0% PASS
Suction ID: 2.000
stages
N (rpm)
15
10
#VALUE!
Overwrite old data with new on
2k3x2-8
25
0
14
21
21
21
20
1,150
1,150
1,150
1,150
1,150
1,150
2.0
Efficiency Trim Coeff.: 0.15
NA
Company: THE DURIRON COMPANY
Date: RPM ratio: 1.000
Fire
Type:
Primary
Secondary
Pump Model
Curve
0
20
31
31
31
#VALUE! head-drop
GPM-lift
TDH (lift) V-Head Corr.
BEP
head
BEP out
#DIV/0!
87
60.1%
17
of range
Semi open,STD-A60,Max sphere 17/32,eye area 6.8sq
Disch.inch
ID: 3
Test No
1,150
1,150
1,150
1,150
1,150
1,150
2.0
Efficiency Trim Coeff.: 0.15
NA
Company: THE DURIRON COMPANY
Date: RPM ratio: 1.000
Fire
Type:
Primary
Secondary
BEP
head
BEP out
#DIV/0!
103
62.6%
20
of range
Semi open,STD-A60,Max sphere 17/32,eye area 6.8sq
Disch.inch
ID: 3
Test No
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
Head (feet)
GPM
1150
TDH
BHP
RPM
20.0
20.5
0.4
0.4
1,150
1,150
20
Head (feet)
Lift Test:
Data Point
15
10
26.5%
42.1%
54.3%
59.6%
59.2%
51.9%
47.6%
40.4%
Lift Test:
Data Point
GPM
NPSH
1
2
3
4
5
6
28.7
46.5
89.0
120.1
125.1
131.4
0.5
0.5
1.0
1.5
1.8
2.0
Lift Fact:
20.0
40.0
60.0
80.0
100.0
120.0
130.0
140.0
21.0
20.0
19.7
17.7
15.3
11.8
10.0
8.0
#VALUE! head-drop
GPM-lift
TDH (lift) V-Head Corr.
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
Pump Size
Pump Model
Imp. D
6.500
Data Point
Efficiency
GPM
TDH
1
2
3
4
5
6
7
8
9
10
0.0%
24.6%
34.7%
43.2%
56.4%
57.7%
55.4%
50.9%
41.8%
36.6%
Lift Test:
0.0
20.0
30.0
40.0
60.0
80.0
100.0
110.0
120.0
125.0
17.6
17.5
17.4
17.1
16.0
14.0
11.6
10.0
7.7
6.5
Data Point
GPM
NPSH
1
2
3
4
5
6
26.4
42.8
83.9
111.5
117.8
124.9
0.5
0.5
1.0
1.5
1.8
2.0
Lift Fact:
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
30
30
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
BHP
Head
Efficiency
NPSH
Lift
BHP
RPM
0.3
1,150
0.4
1,150
0.4
1,150
0.4
1,150
0.4
1,150
0.5
1,150
0.5
1,150
0.5
1,150
0.6
1,150
0.6
1,150
#VALUE! #VALUE!
2k3x2-8
35
30
25
20
15
10
5
0
0
RPM
Curve
1,150
1,150
1,150
1,150
1,150
1,150
BHP
Head
Efficiency
NPSH
Lift
2.0
Efficiency Trim Coeff.: 0.15
NA
Company: THE DURIRON COMPANY
Date: RPM ratio: 1.000
Fire
Type:
Primary
Secondary
#VALUE!
Overwrite old data with new on
0
20
30
1150
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
Curve
#VALUE! head-drop
GPM-lift
TDH (lift) V-Head Corr.
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
RPM
100.0% PASS
Suction ID: 2.000
stages
N (rpm)
1,150
1,150
1,150
1,150
1,150
1,150
2.0
Efficiency Trim Coeff.: 0.15
NA
Company: THE DURIRON COMPANY
Date: RPM ratio: 1.000
Fire
Type:
Primary
Secondary
BEP
head
BEP out
#DIV/0!
83
57.8%
14
of range
Semi open,STD-A60,Max sphere 17/32,eye area 6.8sq
Disch.inch
ID: 3
Test No
0.4
1,150
0.5
1,150
0.6
1,150
0.6
1,150
0.7
1,150
0.7
1,150
0.7
1,150
0.7
1,150
#VALUE! #VALUE!
Head (feet)
3
4
5
6
7
8
9
10
0
3
#VALUE!
Overwrite old data with new on
2k3x2-8
16
14
Pump Size
Pump Model
Data Point
1
2
3
4
5
6
7
8
9
10
0.0%
13.8%
24.9%
35.7%
42.9%
49.8%
53.8%
56.0%
46.7%
36.6%
Lift Test:
Data Point
GPM
NPSH
1
2
3
4
5
6
24.2
39.1
59.7
77.4
89.4
103.5
0.5
0.5
0.8
1.0
1.3
1.5
Lift Fact:
0.0
10.0
20.0
30.0
40.0
50.0
60.0
80.0
100.0
112.0
Imp. D
6.000
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
Pump Size
Pump Model
Imp. D
5.500
Data Point
Efficiency
GPM
TDH
1
2
3
4
5
6
7
8
9
10
0.0%
24.0%
34.4%
41.9%
50.0%
52.7%
52.3%
50.0%
42.5%
31.6%
Lift Test:
0.0
20.0
30.0
40.0
50.0
60.0
70.0
80.0
90.0
100.0
11.8
11.9
11.8
11.2
10.9
10.0
9.0
7.7
6.0
4.0
GPM
NPSH
1
2
3
4
21.2
33.3
50.3
70.9
0.5
0.5
0.8
1.0
RPM
0.3
1,150
0.3
1,150
0.3
1,150
0.3
1,150
0.3
1,150
0.4
1,150
0.4
1,150
0.4
1,150
0.4
1,150
0.4
1,150
#VALUE! #VALUE!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
16
16
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
4
2
0
0
BHP
Head
Efficiency
NPSH
Lift
#VALUE!
Overwrite old data with new on
2k3x2-8
18
0
11
16
RPM
0.2
1,150
0.3
1,150
0.3
1,150
0.3
1,150
0.3
1,150
0.3
1,150
0.3
1,150
0.3
1,150
0.3
1,150
0.3
1,150
#VALUE!
#VALUE!
#VALUE! head-drop
GPM-lift
TDH (lift) V-Head Corr.
Curve
1150
BHP
RPM
100.0% PASS
Suction ID: 2.000
stages
N (rpm)
10
1,150
1,150
1,150
1,150
1,150
1,150
2.0
Efficiency Trim Coeff.: 0.15
NA
Company: THE DURIRON COMPANY
Date: RPM ratio: 1.000
Fire
Type:
Primary
Secondary
Data Point
12
1150
BHP
#VALUE! head-drop
GPM-lift
TDH (lift) V-Head Corr.
BEP
head
BEP out
#DIV/0!
65
52.9%
9
of range
Semi open,STD-A60,Max sphere 17/32,eye area 6.8sq
Disch.inch
ID: 3
Test No
TDH
14.8
14.8
14.8
14.6
14.0
14.0
13.5
11.0
7.7
5.7
5
Head (feet)
Test No
100.0% PASS
Suction ID: 2.000
stages
N (rpm)
16
14
12
Head (feet)
gpm
BEP
head
BEP out
#DIV/0!
73
56.3%
12
of range
Semi open,STD-A60,Max sphere 17/32,eye area 6.8sq
Disch.inch
ID: 3
Specific Speed
10
8
6
4
2
0
0
RPM
Curve
1,150
1,150
1,150
1,150
BHP
Head
Efficiency
NPSH
1.3
1.5
Lift Fact:
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
Pump Size
Pump Model
Imp. D
Efficiency
GPM
TDH
1
2
3
4
5
6
7
8
9
10
0.0%
13.2%
24.7%
33.5%
42.1%
46.5%
47.9%
46.4%
39.9%
25.8%
Lift Test:
0.0
10.0
20.0
30.0
40.0
50.0
60.0
70.0
80.0
92.0
8.9
8.9
8.8
8.4
8.0
7.9
7.0
5.8
4.5
3.0
GPM
NPSH
1
2
3
4
5
6
15.4
27.5
44.5
60.8
69.3
79.9
0.5
0.5
0.8
1.0
1.3
1.5
Lift Fact:
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
0
Data Point
Pump Size
Pump Model
1150
BHP
RPM
0.2
1,150
0.2
1,150
0.2
1,150
0.2
1,150
0.2
1,150
0.2
1,150
0.2
1,150
0.2
1,150
0.2
1,150
0.3
1,150
#VALUE!
#VALUE!
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
Imp. D
0.000
TDH
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
2k3x2-8
10
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
8
6
4
2
0
0
-2
-4
RPM
Curve
1,150
1,150
1,150
1,150
1,150
1,150
BHP
Head
Efficiency
NPSH
Lift
2.0
Efficiency Trim Coeff.: 0.15
NA
Company: THE DURIRON COMPANY
Date: RPM ratio: 1.000
Fire
Type:
Primary
Secondary
BEP
head
#VALUE!
#DIV/0!
#VALUE!
#VALUE! #VALUE!
#VALUE!
Semi open,STD-A05,Max sphere 13/32,eye area 3.5sq
Disch.inch
ID: 2
Test No
100.0% PASS
Suction ID: 2.000
stages
N (rpm)
#VALUE! head-drop
GPM-lift
TDH (lift) V-Head Corr.
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
Lift
#VALUE!
Overwrite old data with new on
0
-2
-3
-3
-3
5.000
Data Point
Data Point
1,150
1,150
2.0
Efficiency Trim Coeff.: 0.15
NA
Company: THE DURIRON COMPANY
Date: RPM ratio: 1.000
Fire
Type:
Primary
Secondary
BEP
head
BEP out
#DIV/0!
60
48.0%
7
of range
Semi open,STD-A60,Max sphere 17/32,eye area 6.8sq
Disch.inch
ID: 3
Test No
#DIV/0!
#DIV/0!
Head (feet)
80.8
92.1
#VALUE!
Overwrite old data with new on
2k3x2-8
1
0
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
Suction ID: 1.000
stages
N (rpm)
#DIV/0!
BHP
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
RPM
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
Head (feet)
5
6
1
1
0
0
0
0
0
0
Data Point
1
2
3
4
5
6
GPM
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
NPSH
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
Lift Fact:
#N/A
#N/A
#N/A
#N/A
#VALUE! head-drop
GPM-lift
TDH (lift) V-Head Corr.
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
Lift Test:
Data Point
1
2
3
4
5
6
Pump Model
Data Point
GPM
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
Primary
Pump Size
NPSH
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
RPM
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
2.0
Efficiency Trim Coeff.: 0.15
NA
Company: THE DURIRON COMPANY
Date: RPM ratio: 1.000
Fire
Type:
BEP
head
#VALUE!
#VALUE!
#VALUE!
#VALUE! #VALUE!
#VALUE!
Semi open,STD-A05,Max sphere 13/32,eye area 3.5sq
Disch.inch
ID: 2
Test No
#N/A
#N/A
#N/A
#N/A
#VALUE! #VALUE!
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
Imp. D
0.000
TDH
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
BHP
Head
Efficiency
NPSH
Lift
#VALUE!
Overwrite old data with new on
2k3x2-8
1
Secondary
0
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
Suction ID: 1.000
stages
N (rpm)
3500
BHP
RPM
#N/A
3,500
#N/A
3,500
#N/A
3,500
#N/A
3,500
#N/A
3,500
#N/A
3,500
#N/A
3,500
#N/A
3,500
#N/A
3,500
#N/A
3,500
#VALUE! #VALUE!
#VALUE! head-drop
GPM-lift
TDH (lift) V-Head Corr.
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
Curve
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
Head (feet)
#N/A
#N/A
Lift Test:
1
1
0
0
0
0
0
0
RPM
Curve
3,500
3,500
3,500
3,500
3,500
3,500
BHP
Head
Efficiency
NPSH
Lift
#VALUE!
CHECK FOR HIDDEN TABLES ABOVE THIS LINE! - Unhide Tables for overwriting them with new actual data !
Unhide the rows below this line to compare up to 3 sets of curves by Copy&Paste Special-Values any of the abov
Pump 1
Primary
Trim Ratio:
1000
Test No
Secondary
Primary
BEP
head
Pump Size
Disch. ID:
Pump Model
1500
Pump
Type:
RPM ratio:
0
0
0
Secondary
Imp. D
Suction ID:
stages
N (rpm)
Efficiency
GPM
TDH
BHP
RPM
#N/A
#N/A
#DIV/0!
#DIV/0!
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
Data Point
Lift Test:
NPSH
GPM
#VALUE!
GPM-lift
head-drop #VALUE!
TDH (lift)
V-Head Corr.
#VALUE!
RPM
Data Point
Pump2
Primary
Trim Ratio:
Test No
Data Point
1000
Secondary
Primary
BEP
head
Pump Size
Disch. ID:
Pump Model
Efficiency
GPM
1500
Type:
RPM ratio:
Imp. D
TDH
Suction ID:
stages
BHP
0
0
Secondary
Curve
BHP
Head
Efficiency
NPSH
Lift
N (rpm)
RPM
Curve
BHP
Head
Efficiency
NPSH
Lift
Curve
BHP
Head
Data Point
Lift Test:
NPSH
GPM
Pump3
Primary
Trim Ratio:
head-drop #VALUE!
TDH (lift)
V-Head Corr.
1000
Test No
Data Point
GPM
BEP
head
Pump Size
Disch. ID:
Pump Model
Efficiency
GPM
Lift Test:
NPSH
#VALUE!
GPM-lift
Secondary
#VALUE!
RPM
1500
Type:
RPM ratio:
Data Point
#VALUE!
GPM-lift
Imp. D
TDH
Primary
Secondary
Suction ID:
stages
N (rpm)
BHP
RPM
head-drop #VALUE!
TDH (lift)
V-Head Corr.
#VALUE!
RPM
Efficiency
NPSH
Lift
1150 rpm
2
-08x33--3.7406E-05x
4.7004E-07x
7.7800E-04x2++9.3665E-03x
6.1904E-02x++3.9265E-01
2.9811E+01
100
200
300
400
500
Q (gpm)
Curve Coefficients
Coeff-3
9.31730E-08
-4.70035E-07
-6.32532E-08
2.44714E-06
#VALUE!
Coeff-2
-3.74056E-05
-7.77996E-04
-2.88573E-05
-7.00887E-04
#VALUE!
Check Curve !
Coeff-1
Coeff-0
9.36652E-03 3.92649E-01
6.19040E-02 2.98113E+01
8.78554E-03 1.41616E-01
8.02409E-02 -2.36967E+00
#VALUE!
#VALUE!
150
150
150
150
150
% Head Drop at Secondary Point at Lift-Test :
Overwrite old data with new one in Input-tab. Copy&Paste additional data-blocks if necessary
1150 rpm
8.000
Test Curve
0
Y
1
20
59.7%
2.2
#VALUE!
#VALUE!
in Impeller
Head- Data
Lift
Primary-Secondary
Power-Data
20
40
60
80
100
120
Q (gpm)+ 4.9521E-01
y = -4.1846E-08x3 + 8.0122E-06x2 + 4.3596E-03x
140
160
180
200
Curve Coefficients
Coeff-3
Coeff-2
Coeff-1
-4.18457E-08 8.01219E-06 4.35965E-03
-3.18345E-06 3.58193E-05 -1.93320E-02
-5.89564E-08 -3.73107E-05 9.87152E-03
-1.97753E-06 1.07048E-03 -1.48374E-01
#VALUE!
#VALUE!
#VALUE!
Check Curve !
Coeff-0
4.95209E-01
3.02232E+01
1.09561E-01
7.13099E+00
#VALUE!
150
150
150
150
150
% Head Drop at Secondary Point at Lift-Test :
Overwrite old data with new one in Input-tab. Copy&Paste additional data-blocks if necessary
1150 rpm
7.500
Test Curve
0
Y
1
17
55.2%
2.3
#VALUE!
#VALUE!
in Impeller
Head-Data
Lift
y=
-1.2714E-05x3
2.6098E-03x2
Primary-Secondary
- 2.4411E-01x + 3.1315E+01
Power-Data
20
40
60
80
100
120
140
160
2 + 8.0923E-04x + 5.0160E-01
Q (gpm)
y = -1.8111E-07x3 + 4.1683E-05x
Curve Coefficients
Coeff-3
Coeff-2
-1.81114E-07 4.16833E-05
-1.27136E-05 2.60978E-03
-6.13481E-07 1.25016E-04
3.92922E-06 -8.67047E-04
#VALUE!
#VALUE!
Coeff-1
8.09228E-04
-2.44112E-01
-6.24701E-03
6.32559E-02
#VALUE!
Check Curve !
Coeff-0
5.01604E-01
3.13152E+01
6.13584E-01
-5.43405E-01
#VALUE!
0
0
0
0
0
% Head Drop at Secondary Point at Lift-Test :
Overwrite old data with new one in Input-tab. Copy&Paste additional data-blocks if necessary
1150 rpm
7.000
Test Curve
0
Y
1
31
61.4%
-0.5
#VALUE!
#VALUE!
in Impeller
Head-Data
Lift
Primary-Secondary
Power-Data
20
40
60
80
100
y = -2.4497E-07x3 + 5.6261E-05x2 - 1.6606E-03x + 4.9957E-01
Q (gpm)
120
Curve Coefficients
140
160
Check Curve !
Coeff-3
Coeff-2
Coeff-1
Coeff-0
-2.44975E-07 5.62613E-05 -1.66065E-03 4.99573E-01
5.02434E-07 -9.91769E-04 3.61611E-02 2.09730E+01
9.05741E-08 -9.94011E-05 1.53031E-02 -3.74034E-02
-4.65427E-05 1.65170E-02 -1.90025E+00 7.21043E+01
#VALUE!
#VALUE!
#VALUE!
#VALUE!
0
0
0
0
0
% Head Drop at Secondary Point at Lift-Test :
Overwrite old data with new one in Input-tab. Copy&Paste additional data-blocks if necessary
1150 rpm
6.500
Test Curve
0
Y
0
21
-3.7%
72.1
#VALUE!
#VALUE!
in Impeller
Head-Data
Lift
Primary-Secondary
Power-Data
20
40
60
80
100
120
140
(gpm)
y = 8.5720E-08x3 - 4.3216E-05x2 +Q7.7169E-03x
+ 1.0428E-01
Curve Coefficients
Check Curve !
Coeff-3
Coeff-2
Coeff-1
Coeff-0
8.57205E-08 -4.32162E-05 7.71688E-03 1.04279E-01
-2.16332E-05 4.70156E-03 -4.38343E-01 3.00483E+01
-1.48214E-06 3.09136E-04 -2.06492E-02 1.00988E+00
-2.22349E-05 7.58785E-03 -8.23551E-01 2.98154E+01
#VALUE!
#VALUE!
#VALUE!
#VALUE!
0
0
0
0
0
% Head Drop at Secondary Point at Lift-Test :
Overwrite old data with new one in Input-tab. Copy&Paste additional data-blocks if necessary
1150 rpm
6.000
Test Curve
0
y=
2.1255E-05x3
6.2181E-03x2
Y
0
30
101.0%
29.8
#VALUE!
#VALUE!
in Impeller
+ 4.3418E-01x + 5.2087E+00
Head-Data
Lift
Lift
Primary-Secondary
Power-Data
20
40
60
80
100
120
Q 2(gpm)
y = 5.7673E-07x3 - 1.3960E-04x
+ 1.2017E-02x + 3.4495E-02
Curve Coefficients
Check Curve !
Coeff-3
Coeff-2
Coeff-1
Coeff-0
5.76735E-07 -1.39595E-04 1.20165E-02 3.44947E-02
2.12554E-05 -6.21814E-03 4.34179E-01 5.20872E+00
-1.28860E-07 -9.75883E-05 1.63579E-02 -6.13739E-02
-7.79288E-06 1.98905E-03 -1.48098E-01 4.16064E+00
#VALUE!
#VALUE!
#VALUE!
#VALUE!
0
0
0
0
0
% Head Drop at Secondary Point at Lift-Test :
Overwrite old data with new one in Input-tab. Copy&Paste additional data-blocks if necessary
1150 rpm
5.500
Test Curve
0
Y
0
5
-6.1%
4.2
#VALUE!
#VALUE!
in Impeller
Head-Data
Lift
Primary-Secondary
Power-Data
20
40
60
80
100
120
Q (gpm)
y = -3.7963E-07x3 + 7.0595E-05x2 - 3.0370E-03x
+ 2.9749E-01
Curve Coefficients
Coeff-3
-3.79630E-07
-1.53704E-05
-1.14078E-06
-1.39434E-05
Coeff-2
Coeff-1
Coeff-0
7.05952E-05 -3.03704E-03 2.97492E-01
2.02976E-03 -1.73499E-01 1.64094E+01
8.43895E-05 3.59310E-03 2.52656E-01
3.24656E-03 -2.26212E-01 5.68887E+00
Check Curve !
X
0
0
0
0
Y
0
16
25.3%
5.7
#VALUE!
#VALUE!
#VALUE!
#VALUE!
0
% Head Drop at Secondary Point at Lift-Test :
Overwrite old data with new one in Input-tab. Copy&Paste additional data-blocks if necessary
1150 rpm
5.000
Test Curve
0
#VALUE!
#VALUE!
in Impeller
Head-Data
Lift
Primary-Secondary
Power-Data
10
20
30
40
50
60
70
80
90
100
Curve Coefficients
Check Curve !
Coeff-3
Coeff-2
Coeff-1
Coeff-0
2.27859E-06 -4.36265E-04 2.77731E-02 -3.67364E-01
4.06861E-05 -9.28895E-03 5.70748E-01 -2.56436E+00
-1.36320E-06 7.09769E-05 6.23246E-03 1.45342E-01
-2.47527E-05 4.89018E-03 -2.92111E-01 6.24636E+00
#VALUE!
#VALUE!
#VALUE!
#VALUE!
0
0
0
0
0
% Head Drop at Secondary Point at Lift-Test :
Overwrite old data with new one in Input-tab. Copy&Paste additional data-blocks if necessary
#DIV/0!
rpm
0.000
Test Curve
0
Y
0
-3
14.5%
6.2
#VALUE!
#VALUE!
in Impeller
Head-Data
Lift
Primary-Secondary
Power-Data
1
Q (gpm)
Q (gpm)
Curve Coefficients
Coeff-3
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
Coeff-2
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
Check Curve !
Coeff-1
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
Coeff-0
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
0
0
0
0
0
% Head Drop at Secondary Point at Lift-Test :
Overwrite old data with new one in Input-tab. Copy&Paste additional data-blocks if necessary
3500 rpm
0.000
Test Curve
0
Y
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
in Impeller
Head-Data
Lift
Primary-Secondary
Power-Data
Q (gpm)
Curve Coefficients
Coeff-3
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
Coeff-2
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
Coeff-1
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
Check Curve !
Coeff-0
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
0
0
0
0
0
% Head Drop at Secondary Point at Lift-Test :
pecial-Values any of the above block of data in the designated 3 blocks below
Y
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
Curve
Trim [inch]
Speed [rpm]
0
0
0
0.000
0.000
0.000
0
0
0
Other Conditions
Head [ft]
0
0
0
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
Poly. (Pump1)
Poly. (Pump2)
Poly. (Pump3)
Coeff-3
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
Curve Coefficients
of Pump1 1
0
Coeff-2
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
Coeff-1
Coeff-0
Q [gpm]
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
Coeff-3
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
Coeff-2
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
Coeff-1
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
Coeff-0
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
Coeff-2
#VALUE!
#VALUE!
Coeff-1
#VALUE!
#VALUE!
Check
Curve !
1
Y
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
1500
1500
1500
1500
1500
% Drop at Secondary Point:
Check Curve !
X
1500
1500
1500
1500
1500
Y
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
Coeff-3
#VALUE!
#VALUE!
Coeff-0
#VALUE!
#VALUE!
X
1500
1500
Y
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
1500
1500
1500
% Drop at Secondary Point:
#VALUE!
#VALUE!
#VALUE!
#VALUE!
1
2k3x2-8
Test Curve
Company:
THE DURIRON COMPANY 1150 rpm
8.188 in Impeller
90%
NPSH-Data
NPSH @ Q2
Eff-Data
80%
70%
2
60%
Eff
NPSH (feet)
2
50%
40%
1
0
0
100
200
300
y = -6.3253E-08x3 - 2.8857E-05x2 + 8.7855E-03x + 1.4162E-01
Q (gpm)
400
30%
500
Max Error at
-0.3%
-0.4%
-0.1%
0.0%
#DIV/0!
-0.37%
2
120
120
120
93
#DIV/0!
120
2k3x2-8
Test Curve
50.0
50.0
50.0
93.1
#DIV/0!
Company:
THE DURIRON COMPANY 1150 rpm
8.000 in Impeller
70%
NPSH-Data
NPSH @Q2
60%
Eff-Data
50%
40%
30%
20%
Eff
NPSH (feet)
0
0
0%
200
Max Error at
-0.6%
-0.6%
-0.7%
0.0%
#DIV/0!
-0.70%
3
70
150
100
94
#DIV/0!
100
2k3x2-8
Test Curve
3
50.0
50.0
50.0
93.7
#DIV/0!
Company:
THE DURIRON COMPANY 1150 rpm
7.500 in Impeller
70%
NPSH-Data
NPSH @Q2
60%
Eff-Data
50%
40%
30%
Eff
NPSH (feet)
0
0
20
20%
60
80
100
120
140
160
3
2
y = 3.9292E-06x - 8.6705E-04x + 6.3256E-02x - 5.4341E-01
40
-1
10%
-1
2 - 6.2470E-03x + 6.1358E-01
y = -6.1348E-07x3Q
+ 1.2502E-04x
(gpm)
Max Error at
0.5%
0.9%
-1.0%
0.0%
#DIV/0!
-1.00%
4
140
120
140
132
#DIV/0!
140
2k3x2-8
Test Curve
80
70
NPSH-Data
80.0
80.0
80.0
92.8
#DIV/0!
Company:
THE DURIRON COMPANY 1150 rpm
7.000 in Impeller
70%
60%
50%
50
40%
40
Eff
NPSH (feet)
NPSH @ Q2
Eff-Data
60
0%
30%
30
NPSH (feet)
30
20%
20
10%
10
0
0
20
0%
60
80
100
120
140
160
3
2
y = -4.6543E-05x
Q (gpm) + 1.6517E-02x - 1.9003E+00x + 7.2104E+01
40
Max Error at
-0.9%
0.7%
-1.0%
0.0%
#DIV/0!
-1.00%
5
130
100
120
125
#DIV/0!
120
2k3x2-8
Test Curve
35
60.0
60.0
60.0
89.0
#DIV/0!
Company:
THE DURIRON COMPANY 1150 rpm
6.500 in Impeller
70%
NPSH-Data
NPSH @ Q2
60%
Eff-Data
25
50%
20
40%
15
30%
10
20%
Eff
NPSH (feet)
30
10%
20
0%
60
80
100
120
140
3
2
y = -2.2235E-05x
Q (gpm) + 7.5878E-03x - 8.2355E-01x + 2.9815E+01
40
Max Error at
-0.5%
-1.0%
-1.0%
0.0%
#DIV/0!
-1.00%
6
100
120
120
84
#DIV/0!
120
2k3x2-8
Test Curve
35
NPSH-Data
60.0
60.0
60.0
83.9
#DIV/0!
Company:
THE DURIRON COMPANY 1150 rpm
6.000 in Impeller
60%
NPSH @ Q2
30
Eff-Data
50%
30
50%
Eff-Data
40%
20
30%
Eff
NPSH (feet)
25
15
20%
10
5
0
0
20
0%
40
60 3
80 2
100
120
y = -7.7929E-06x
+ 1.9890E-03x - 1.4810E-01x + 4.1606E+00
Q (gpm)
-1.0%
-0.3%
0.5%
0.0%
#DIV/0!
-0.99%
7
50
50
80
60
#DIV/0!
50
2k3x2-8
Test Curve
35
10%
40.0
40.0
40.0
59.7
#DIV/0!
Company:
THE DURIRON COMPANY 1150 rpm
5.500 in Impeller
60%
NPSH-Data
NPSH @ Q2
30
50%
Eff-Data
40%
20
30%
15
20%
10
10%
20
40
60
80
100
2 - 2.2621E-01x + 5.6889E+00
y = -1.3943E-05x3 Q
+ 3.2466E-03x
(gpm)
Max Error at
0.8%
-0.7%
0.9%
0.0%
70
90
80
50
50.0
50.0
50.0
50.3
0%
120
Eff
NPSH (feet)
25
#DIV/0!
0.87%
8
#DIV/0!
80
2k3x2-8
Test Curve
35
#DIV/0!
Company:
THE DURIRON COMPANY 1150 rpm
5.000 in Impeller
60%
NPSH-Data
NPSH @ Q2
30
50%
Eff-Data
40%
20
30%
Eff
NPSH (feet)
25
15
20%
10
10%
5
0
0
Max Error at
-0.9%
0.3%
0.4%
0.0%
#DIV/0!
-0.87%
9
50
80
70
80
#DIV/0!
50
2k3x2-8
Test Curve
35
40.0
40.0
40.0
44.5
#DIV/0!
Company:
#DIV/0!
NPSH-Data
NPSH @ Q2
30
100%
Eff-Data
80%
20
60%
15
40%
10
20%
5
0
0%
0
Eff
NPSH (feet)
25
0%
0
Q (gpm)
Max Error at
0.0%
0.0%
0.0%
0.0%
#DIV/0!
0.00%
10
#N/A
#N/A
#N/A
#DIV/0!
#DIV/0!
#N/A
2k3x2-8
Test Curve
35
#N/A
#N/A
#N/A
#DIV/0!
#DIV/0!
Company:
THE DURIRON COMPANY 3500 rpm
0.000 in Impeller
70%
NPSH-Data
NPSH @ Q2
60%
Eff-Data
25
50%
20
40%
15
30%
10
20%
Eff
NPSH (feet)
30
10%
20
40
60
Max Error at
0.0%
0.0%
0.0%
0.0%
#DIV/0!
0.00%
-0.9%
0.5%
-1.0%
0.9%
-1.0%
-0.1%
#N/A
#N/A
#N/A
#DIV/0!
#DIV/0!
#N/A
#N/A
#N/A
#N/A
#DIV/0!
#DIV/0!
80
Q (gpm)
100
120
0%
140
#VALUE!
#VALUE!
#VALUE!
Pump
Curve
Trim [inch]
Speed [rpm]
0
0
0
0.000
0.000
0.000
0
0
0
0
0
0
#VALUE!
#VALUE!
#VALUE!
NPSH [feet]
#VALUE!
#VALUE!
#VALUE!
Lift [ft]
Poly. (Pump1)
Poly. (Pump2)
Poly. (Pump3)
0
0
Q [gpm]
Other Conditions
0
0
0
No
1
% Error [(Data-Eq)/Data]
TDH
As per equation
BHP
Efficiency
0.00%
0.00%
0.00%
0.00%
0.00%
0.00%
0.86%
8.75%
-0.01%
-0.01%
0.17%
0.15%
-0.37%
-0.31%
0.28%
0.29%
-0.03%
-0.11%
-0.04%
0.00%
% Error [(Data-Eq)/Data]
0.0%
0.0%
0.0%
-20.9%
0.0%
0.0%
-0.1%
0.0%
0.0%
0.0%
NPSH
120.15%
81.93%
0.00%
0.00%
0.00%
0.00%
GPM
#N/A
#N/A
#N/A
20.0
50.0
100.0
120.0
140.0
150.0
180.0
As per equation
TDH (lift)
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
No
2
% Error [(Data-Eq)/Data]
TDH
BHP
Efficiency
30.7
30.9
27.8
25.2
21.9
20.0
13.0
#N/A
#N/A
#N/A
0.6
0.8
1.0
1.1
1.2
1.3
1.4
#N/A
#N/A
#N/A
30.5%
50.1%
66.8%
67.1%
63.2%
59.7%
41.9%
#N/A
#N/A
#N/A
GPM
NPSH
40.7
52.7
93.1
125.6
145.3
169.3
-0.1
0.3
1.0
1.5
2.0
3.0
GPM-lift
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
TDH (lift)
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
As per equation
TDH
BHP
Efficiency
0.00%
0.00%
-4.22%
-2.85%
0.14%
-0.34%
0.14%
0.36%
-0.61%
0.35%
0.00%
0.00%
-3.17%
-0.91%
0.28%
-0.65%
0.63%
-0.21%
-0.12%
0.07%
0.0%
0.0%
0.0%
-15.5%
-0.2%
0.5%
-0.7%
0.5%
-0.1%
0.0%
GPM
#N/A
#N/A
0.0
20.0
50.0
70.0
100.0
120.0
150.0
172.0
TDH
BHP
Efficiency
30.2
29.8
28.9
28.0
25.5
22.9
17.4
11.8
#N/A
#N/A
0.5
0.6
0.7
0.8
1.0
1.1
1.2
1.3
#N/A
#N/A
11.0%
29.2%
50.2%
59.8%
66.5%
65.5%
55.2%
40.4%
#N/A
#N/A
% Error [(Data-Eq)/Data]
NPSH
-437.61%
-35.64%
0.00%
0.00%
0.00%
0.00%
As per equation
TDH (lift)
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
No
3
% Error [(Data-Eq)/Data]
TDH
-30.48%
-14.06%
-3.80%
1.61%
0.09%
-0.44%
0.94%
-0.34%
-0.65%
0.42%
% Error [(Data-Eq)/Data]
NPSH
-74.29%
-89.66%
0.00%
0.00%
0.00%
0.00%
GPM
NPSH
41.3
52.0
93.7
126.9
142.4
167.1
2.7
2.0
1.0
1.5
2.0
3.0
GPM-lift
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
TDH (lift)
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
As per equation
BHP
Efficiency
-25.40%
-13.41%
-5.19%
-3.30%
-0.06%
0.21%
-0.16%
-0.37%
0.54%
-0.17%
0.0%
-107.0%
-21.2%
0.8%
0.1%
-0.6%
0.9%
0.0%
-1.0%
0.5%
TDH (lift)
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
No
4
% Error [(Data-Eq)/Data]
GPM
0.0
20.0
40.0
60.0
80.0
100.0
120.0
130.0
140.0
152.0
As per equation
TDH
BHP
Efficiency
31.3
27.4
24.9
23.3
22.0
20.3
17.6
15.8
13.4
9.9
0.5
0.5
0.6
0.7
0.7
0.8
0.9
0.9
0.9
1.0
0.6
53.4%
52.4%
55.6%
60.0%
62.6%
60.4%
56.6%
50.6%
39.8%
GPM
NPSH
41.7
50.9
92.8
125.3
132.3
138.0
0.9
0.9
1.0
1.5
1.8
2.0
GPM-lift
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
TDH (lift)
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
As per equation
TDH
BHP
Efficiency
GPM
TDH
BHP
Efficiency
-4.86%
-3.59%
-42.74%
-28.51%
0.0%
22.4%
0.0
10.0
21.0
21.2
0.5
0.5
0.0
10.6%
-1.45%
-4.32%
0.10%
-0.43%
0.72%
-0.52%
-0.17%
0.31%
% Error [(Data-Eq)/Data]
NPSH
-5908.48%
-2857.90%
0.00%
0.00%
0.00%
0.00%
-21.73%
-5.73%
0.08%
-0.23%
0.10%
0.60%
-0.91%
0.34%
13.4%
-0.1%
0.0%
-0.2%
0.4%
-1.0%
1.0%
-0.3%
TDH (lift)
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
No
5
% Error [(Data-Eq)/Data]
TDH
-70.73%
-31.37%
-18.08%
-9.08%
0.00%
0.04%
-0.33%
0.74%
-1.00%
0.54%
% Error [(Data-Eq)/Data]
NPSH
-2486.07%
-1246.05%
0.00%
0.00%
0.00%
0.00%
20.0
40.0
60.0
80.0
100.0
120.0
130.0
140.0
As per equation
21.3
20.9
19.7
17.8
15.2
11.9
10.0
8.0
GPM
NPSH
28.7
46.5
89.0
120.1
125.1
131.4
30.0
14.8
1.0
1.5
1.7
2.0
0.5
0.5
0.5
0.6
0.7
0.7
0.7
0.7
GPM-lift
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
23.0%
42.1%
54.3%
59.7%
58.9%
52.4%
47.1%
40.5%
TDH (lift)
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
As per equation
BHP
Efficiency
67.41%
32.77%
21.26%
12.68%
-0.05%
0.22%
-0.48%
0.31%
0.20%
-0.19%
0.0%
-188.7%
-81.2%
-35.2%
0.0%
-0.1%
-0.1%
0.5%
-1.0%
0.6%
TDH (lift)
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
GPM
0.0
20.0
30.0
40.0
60.0
80.0
100.0
110.0
120.0
125.0
As per equation
TDH
BHP
Efficiency
30.0
23.0
20.5
18.7
16.0
14.0
11.6
9.926
7.8
6.5
0.1
0.2
0.3
0.35
0.43
0.49
0.530
0.54
0.56
0.56
1.0
70.9%
62.9%
58.4%
56.4%
57.8%
55.4%
50.6%
42.2%
36.4%
GPM
NPSH
26.4
42.8
83.9
111.5
117.8
124.9
12.9
6.7
1.0
1.5
1.7
2.0
GPM-lift
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
TDH (lift)
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
No
6
% Error [(Data-Eq)/Data]
TDH
64.81%
39.53%
21.79%
9.51%
0.09%
-0.28%
0.26%
-0.08%
-0.01%
0.02%
% Error [(Data-Eq)/Data]
NPSH
-226.53%
-89.06%
0.00%
0.00%
0.00%
0.00%
As per equation
BHP
Efficiency
86.73%
47.68%
25.47%
8.09%
0.39%
-0.99%
0.65%
0.05%
-0.22%
0.10%
0.0%
33.3%
9.4%
5.3%
0.0%
0.2%
-0.5%
0.5%
-0.5%
0.2%
TDH (lift)
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
No
7
% Error [(Data-Eq)/Data]
TDH
-39.06%
-14.52%
-6.92%
-4.76%
0.11%
-0.37%
0.24%
0.39%
-0.68%
0.33%
% Error [(Data-Eq)/Data]
NPSH
-344.04%
-148.52%
0.00%
0.00%
GPM
0.0
10.0
20.0
30.0
40.0
50.0
60.0
80.0
100.0
112.0
As per equation
TDH
BHP
Efficiency
5.2
8.9
11.6
13.2
14.0
14.0
13.5
11.0
7.7
5.7
0.0
0.1
0.2
0.28
0.33
0.36
0.378
0.40
0.42
0.44
-0.1
9.2%
22.6%
33.8%
42.9%
49.6%
54.1%
55.7%
46.97%
36.6%
GPM
NPSH
24.2
39.1
59.7
77.4
89.4
103.5
1.6
0.9
0.8
1.0
1.3
1.5
GPM-lift
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
TDH (lift)
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
As per equation
BHP
Efficiency
-35.22%
-4.78%
0.13%
1.98%
0.12%
-0.49%
0.79%
-0.63%
0.24%
-0.03%
0.0%
-45.2%
-18.0%
-9.4%
0.0%
0.3%
-0.7%
0.9%
-0.6%
0.2%
TDH (lift)
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
GPM
TDH
BHP
Efficiency
16.4
13.6
12.6
11.7
10.9
10.0
8.9
7.7
6.0
4.0
0.3
0.3
0.3
0.26
0.27
0.29
0.301
0.31
0.32
0.32
0.3
34.9%
40.6%
45.8%
50.1%
52.6%
52.6%
49.6%
42.8%
31.5%
GPM
NPSH
GPM-lift
TDH (lift)
21.2
33.3
50.3
70.9
2.2
1.2
0.7
1.0
0.0
20.0
30.0
40.0
50.0
60.0
70.0
80.0
90.0
100.0
As per equation
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
0.00%
0.00%
#DIV/0!
#DIV/0!
80.8
92.1
No
8
% Error [(Data-Eq)/Data]
TDH
Efficiency
128.81%
329.60%
74.66%
177.05%
37.95%
82.32%
13.14%
29.10%
-0.09%
0.33%
0.28%
-0.87%
-0.25%
0.52%
-0.14%
0.59%
0.34%
-0.76%
-0.15%
0.18%
% Error [(Data-Eq)/Data]
0.0%
-61.4%
-16.4%
-7.3%
0.0%
0.1%
-0.3%
0.4%
-0.2%
0.1%
-464.87%
-180.08%
0.00%
0.00%
0.00%
0.00%
#DIV/0!
#DIV/0!
#VALUE!
#VALUE!
As per equation
BHP
NPSH
1.3
1.5
GPM
BHP
Efficiency
-2.6
2.3
5.5
7.3
8.0
7.8
7.0
5.8
4.5
3.0
-0.4
-0.1
0.0
0.13
0.19
0.22
0.221
0.22
0.23
0.27
0.1
21.3%
28.7%
35.9%
42.1%
46.4%
48.0%
46.2%
40.0%
25.8%
GPM
NPSH
GPM-lift
TDH (lift)
15.4
27.5
44.5
60.8
69.3
79.9
2.8
1.4
0.7
1.0
1.3
1.5
0.0
10.0
20.0
30.0
40.0
50.0
60.0
70.0
80.0
92.0
As per equation
TDH (lift)
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
No
9
% Error [(Data-Eq)/Data]
TDH
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
As per equation
TDH
BHP
Efficiency
0.00%
0.00%
0.00%
0.00%
0.00%
0.00%
0.00%
0.00%
0.00%
0.00%
0.00%
0.00%
0.00%
0.00%
0.00%
0.00%
0.0%
0.0%
0.0%
0.0%
0.0%
0.0%
0.0%
0.0%
GPM
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
TDH
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
BHP
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
Efficiency
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
0.00%
0.00%
% Error [(Data-Eq)/Data]
NPSH
0.00%
0.00%
0.00%
0.00%
0.00%
0.00%
0.00%
0.00%
0.0%
0.0%
TDH (lift)
GPM
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
No
10
% Error [(Data-Eq)/Data]
TDH
0.00%
0.00%
0.00%
0.00%
0.00%
0.00%
0.00%
0.00%
0.00%
0.00%
% Error [(Data-Eq)/Data]
NPSH
0.00%
0.00%
0.00%
0.00%
0.00%
0.00%
#N/A
#VALUE!
#N/A
#VALUE!
As per equation
NPSH
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
GPM-lift
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#VALUE!
#VALUE!
TDH (lift)
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
As per equation
BHP
Efficiency
0.00%
0.00%
0.00%
0.00%
0.00%
0.00%
0.00%
0.00%
0.00%
0.00%
0.0%
0.0%
0.0%
0.0%
0.0%
0.0%
0.0%
0.0%
0.0%
0.0%
TDH (lift)
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
GPM
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
As per equation
GPM
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
TDH
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
NPSH
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
BHP
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
GPM-lift
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
Efficiency
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
TDH (lift)
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
Other Conditions
0.0000E+00
0.0000E+00
0.0000E+00
120%
100%
60%
40%
20%
0%
1
Efficiency
80%
1,150
8.19
-4.70035E-07
1,150
8.00
-3.18345E-06
1,150
7.50
-1.27136E-05
1,150
7.00
5.02434E-07
1,150
6.50
-2.16332E-05
1,150
6.00
2.12554E-05
1,150
5.50
-1.53704E-05
1,150
5.00
#DIV/0!
0.00
4.06861E-05
3,500
0.00
-7.77996E-04
6.19040E-02
2.98113E+01
9.31730E-08
-3.74056E-05
9.36652E-03
3.58193E-05
-1.93320E-02
3.02232E+01
-4.18457E-08
8.01219E-06
4.35965E-03
2.60978E-03
-2.44112E-01
3.13152E+01
-1.81114E-07
4.16833E-05
8.09228E-04
-9.91769E-04
3.61611E-02
2.09730E+01
-2.44975E-07
5.62613E-05
-1.66065E-03
4.70156E-03
-4.38343E-01
3.00483E+01
8.57205E-08
-4.32162E-05
7.71688E-03
-6.21814E-03
4.34179E-01
5.20872E+00
5.76735E-07
-1.39595E-04
1.20165E-02
2.02976E-03
-1.73499E-01
1.64094E+01
-3.79630E-07
7.05952E-05
-3.03704E-03
-9.28895E-03
5.70748E-01
-2.56436E+00
2.27859E-06
-4.36265E-04
2.77731E-02
3.92649E-01
4.95209E-01
5.01604E-01
4.99573E-01
1.04279E-01
3.44947E-02
2.97492E-01
-3.67364E-01
Picture: MIII8364AV.jpg
Graph X-axis
Linear
Graph Y-axis
Linear
Log(10)
Log(e)
Date
Time
Log(10)
Log(e)
Photo
Angle
x-output
Numeric
Scientific
Point-to-Point
y-output
Numeric
Scientific
Date
Date
Time
General
Time
General
Don't Format
Don't Format
Pump Data
Minimum Rated Flow
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
If new graph is to be digitized, insert a new graph by clicking the [Load Picture] button.
Click on [Clear Data] Button and then Proceed with new entry according to the GrabIt Instructions.
After digitizing the curve, each set of data points (matching set of BHP and THE data points) must be copied to the [GrabIt Data Filter] tab.
Follow instructions on [GrabIt Data Filter] tab for transferring data to [Input] tab.
2
4
6
8
10
11
14
15
Set 1
Point
x
2
3
6
8
9
12
14
15
2
4
6
8
10
11
14
15
Set 1
Active
Points=
0
18.4552133
35.5351119
48.3298393
68.9224604
107.896734
124.870258
136.173277
150.981422
172.792221
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
Q vs Head
x
0
20
50
100
120
140
150
180
NPSH
8 3/16 inch dia
x
y
40.6750815
0.5
Units are not important for the pick-up test
52.7161186
1.5
93.0641523
1
Pick-up Delta
Average
Pickup err.
Curves
125.570923
1.5
350
0.00%
BHP
145.332503
2
0
0.00%
Head
169.283799
3
0
0.00%
Efficiency
BHP
"Average" is the Average value at the right-end of the correspong type of curves
8 3/16 inch dia
Pick-up Delta is the absolute pick-up error at the zoom under which points are picked up.
x
y
To estimate the error sett-up the pickup zoom (if required)
Pick up a point at intersection point of curve and Y-grid line
Move the mouse to move the cursor away at try to click the same point
Repeat the pick up 5 times. Pick-up Delta = (MaxY-MinY) of all the picks
29.2315879
29.1271383
29.0342925
28.643559
27.5680732
23.8232144
21.4826775
19.6547374
16.6836094
11.2655561
eff
8 inch dia
y
bhp
29
0.48
29
0.58
28.99
0.73
0.82
27.86
25.5
0.9756
23 1.05920141
17.2790011 1.18673367
11.8
1.27
x
0.00001
20
50
70
100
120
150
172
8 inch dia
x
y
41.3239066
51.9516059
93.7029188
126.908814
142.420322
167.070743
0.5
1.5
1
1.5
2
3
8 inch dia
x
eff
Set 1
Points=
Set 2
9 Points=
y
x
0.00
48.19
48.91
17.85
46.80
40.57
41.88
57.60
36.94
78.88
30.12
100.13
21.42
119.96
12.70
139.77
6.93
159.56
180.75
x
0.00
20.31
41.59
60.01
81.27
101.09
119.48
140.70
150.59
Set 1
Points=
x
Set 2
Points=
10
y
Set 3
10 Points=
y
x
90.70
0.00
91.45
18.07
91.21
37.95
90.09
57.82
87.03
77.68
81.14
98.94
75.27
118.78
67.50
138.60
56.90
157.01
44.40
179.63
197.99
Set 3
Points=
10
y
0.00
0.07
20.08
38.69
60.12
80.14
98.73
120.15
140.16
153.02
0.94
0.94
1.04
1.46
1.41
1.67
1.78
1.72
1.83
1.79
0.00
20.19
40.21
60.24
80.28
100.30
120.34
140.35
161.81
183.26
2.03
2.29
2.55
2.81
3.23
3.49
3.91
4.01
4.27
4.53
Q
0.00
20.31
41.59
60.01
81.27
101.09
119.48
140.70
150.59
BHP
0.94
0.94
1.04
1.46
1.41
1.67
1.78
1.72
1.83
H
48.19
48.91
46.80
41.88
36.94
30.12
21.42
12.70
6.93
0.00
26.77
47.18
43.39
53.84
46.07
36.36
26.19
14.41
0.00
20.26
40.28
60.35
80.37
98.98
120.44
139.04
159.07
179.10
200.57
11
y
116.22
116.01
115.80
114.65
112.55
107.61
102.68
95.86
89.05
78.42
66.89
Active
11
y
2.50
3.07
3.33
4.06
4.32
4.74
5.00
5.27
5.68
5.95
6.36
Q vs Head
7.5inch dia
y
bhp
24
0.4
24
0.47
24
0.56
23.7
0.64
22
0.73992
20.2
0.82
17.8
0.88457
15.7
0.91
13.319
0.94
9.9
0.95
x
0.00001
20
40
60
80
100
120
130
140
152
eff
7 inch data
x
y
bhp
0.0001
20
0.35
10
20.5
0.38
20
21
0.4
40
20
0.48
60
19.7
0.55
80
17.7
0.6
100 15.2838 0.65182
120 11.838 0.69128
130
10
0.69
140
8
0.7
eff
x
0.00001
20
30
40
60
80
100
110
120
125
7.5inch dia
x
y
41.68933648
0.5
50.93335038
0.5
92.79226645
1
125.3159915
1.5
132.3490371
1.75
137.996748
2
7 inch data
x
y
28.727448
0.5
46.4810198
0.5
89.0288058
1
120.129207
1.5
125.057657 1.75
131.41703
2
7.5inch dia
x
7 inch data
x
0.5
0.5
1
1.5
1.75
2
6 inch data
eff
x
0.00001
10
20
30
40
50
60
80
100
112
y
14.8
14.8
14.8
14.6
14
13.99
13.5
11.02096
7.7
5.7
6 inch data
x
24.17634
39.09086
59.66828
77.38387
89.41374
103.533
6 inch data
x
6 inch data
bhp
eff
0.26
0.27
0.3
0.31
0.33
0.35493
0.38
0.397901822
0.416
0.44
y
0.5
0.5
0.75
1
1.25
1.5
x
0.00001
20
30
40
50
60
70
80
90
100
eff
5 inch data
y
eff
5 inch data
x
y
15.35524
27.45351
44.48782
60.80287
69.29723
79.91898
5 inch data
x
y
bhp
eff
bhp
x
0.5
0.5
0.75
1
1.25
1.5
eff
bhp
eff
bhp
Instructions:
Copy GPM-TDH data points from the [GrabIt] tab and paste values into cells B11:C20. The last row of data must be in row 20!
Copy GPM-BHP data points from the [GrabIt] tab and paste values into cells E11:F20. The last row of data must be in row 20!
Copy the yellow table and paste into the [Input] tab.
***NOTE: The BHP data coefficient check on the [Curves] tab will not work for the BHP data points, so accuracy of curve fit
should be checked before copying to the [Input] tab.
Data Point
GPM
TDH (feet)
GPM
BHP
1
2
3
4
5
6
7
8
9
10
0
16.133397
28.259554
43.93
55.32
62.44
66.71
73.10
82.33
90.14
8.79877198
8.86657761
8.48152226
7.60
6.74
6.22
5.88
5.04
3.87
2.71
0
12.2003598
20.74591869
31.43
40.69
49.95
60.64
72.03
80.57
92.68
0.17273226
0.17063596
0.17700767
0.18300943
0.20
0.21
0.23
0.23
0.24
0.25
GPM
TDH (feet)
BHP
1
2
3
4
5
6
7
8
9
10
0
16.133397
28.259554
43.9337709
55.3227656
62.4418438
66.7117602
73.101329
82.3324066
90.1350765
8.79877198
8.86657761
8.48152226
7.59755464
6.73661262
6.21851224
5.8756704
5.04159187
3.87234679
2.71077705
-0.01
0.11
0.16
0.20
0.22
0.23
0.23
0.23
0.24
0.25
2.7057E-05
-7.2551E-03
5.0227E-01
-3.4262E+00
-1969.42%
105.21%
35.88%
6.17%
0.21%
-0.61%
0.65%
-0.22%
-0.08%
0.05%
0
0
BHP
BHP
-0.01
0.08
0.13
0.17
0.20
0.21
0.22
0.23
0.24
0.25
0
0
0
0
0
20
40
5.5648E-07
-1.1760E-04
8.9250E-03
-9.2399E-03
60
GPM
Test Data BHP
80
100
Instructions; Copy&past the Test Report as shown below or enter data from curves .
Print/Enter data at nominal RPM and Head in feet !!
Leave four empty lines on the top of each record:
To insert new data insert 30 empty rows in Log and Test tabs . Then copy&paste tables and graphs in L
Test No
Owner
Date:
Serial No:
Descript.
Customer
Pump Size
Pump Model
Disch/Suc. ID
Impeller Dia.
0.000
OK!
1
Data Point
1
2
3
4
5
6
7
8
GPM
352.99
678.88
972.83
1181.82
1523.72
1785.21
2094.42
2431.68
TDH (feet)
925.64
914.09
874.09
846.95
781.32
714.87
634.74
510.84
BHP
296.08
342.01
371.14
387.91
414.53
425.56
434.09
432.83
( 100 x % )
Efficiency
#DIV/0!
#DIV/0!
27.87
45.82
57.86
65.16
72.52
75.73
77.34
72.47
OK!
BEP Capacity Error is larger than 2% ! Consider points redo !
OK!
RPM
2950
2950
2950
2950
2950
2950
2950
2950
BHP
-6.027E-09
-8.536E-06
1.272E-01
TDH
-1.235E-08
-2.435E-05
-5.233E-02
Eff.
-3.198E-09
-2.443E-06
4.777E-02
x1=
-2.500E+03
BEP
RPM
2950
x2=
GPM
TDH (feet)
1991.1
662.5
OK!
Warning: Calculated Best Efficiency < Tabular Best Efficienc
Optional Inputs
NPSH
gauge_h
Head - ft
Data Point
0.00
0.00
0.00
0.00
0.00
0.00
0.00
GPM
NPSH
RPM
0.5
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
Lift test No
it Coefficients
gpm
C heck-up !
% Error
2.606E+02
2094
434.2
0.02%
9.607E+02
2094
630.8
-0.62%
1.689E+01
2094
76.8
-0.65%
-0.35%
-5.19%
Max error:
5.19%
1.991E+03
BHP
% Eff.
432.4
77.1
Data Point
GPM
TDH
RPM
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
2950
2950
2950
2950
2950
2950
velocity correction !
RPM(Nom)
2950
2950
2950
2950
2950
2950
Gage_h
34.30
0.50
34.30
0.50
34.30
0.50
34.30
0.50
34.30
0.50
34.30
0.50
not used
in this template