Professional Documents
Culture Documents
3
ZXSDR BS8700 Product Description
2010 ZTE Corporation. All rights reserved. ZTE CONFIDENTIAL: This document contains proprietary information of ZTE and is not to be disclosed or used without the prior written permission of ZTE. Due to update and improvement of ZTE products and technologies, information in this document is subjected to change without notice.
TABLE OF CONTENTS
1 Overview 1 2 Product Highlights.....................................................................................................................3 3 Functionality...............................................................................................................................4 3.1 Basic Functions.........................................................................................................................4 3.2 Service Functions......................................................................................................................5 4 System Architecture..................................................................................................................7 4.1 Product Physical Structure........................................................................................................7 4.2 Hardware Architecture..............................................................................................................7 4.3 Software Architecture..............................................................................................................22 4.4 External Interface...................................................................................................................23 5 Technical Indices.....................................................................................................................24 6 Operation and Maintenance....................................................................................................26 7 Configuration Principles..........................................................................................................29 7.1 Baseband Unit Configuration Principles..................................................................................29 7.2 Radio Unit Configuration Principles.........................................................................................29 7.3 GSM Single Mode Configuration Principles............................................................................30 7.4 UMTS Single Mode Configuration Principles..........................................................................30 7.5 GSM/UMTS Dual Mode Configuration Principles....................................................................31 8 Acronyms and Abbreviation...................................................................................................33 35
II
FIGURES
III
Conventional GSM/EDGE/UMTS Network System.....................................................................1 ZTE SDR BS Composed GSM/UMTS Network............................................................................1 Networking Diagram (B8200, RNC/BSC and RRU).....................................................................2 In chain and loop networking mode, 4 RRU can be maximally cascaded and the maximal distance is 100 Km; The maximal distance between BBU and first RRU can reach 40 Km. Usually its kindly suggested no more than 10 Km....................................................................2 Example of ZXSDR BS8700 Physical Structures........................................................................7 BS8700 Hardware Structure ........................................................................................................8 Baseband Unit of BS8700.............................................................................................................9 CC Panel 9
FAM Panel 15 R8840 Physical Appearance.......................................................................................................16 R8840 External Interfaces..........................................................................................................17 R8860/R8860E Physical Appearance.........................................................................................18 R8860/R8860E External Interfaces.............................................................................................18 R8880 Physical Appearance.......................................................................................................19 R8880 External Interfaces..........................................................................................................20 R88890 Physical Appearance.....................................................................................................21 R8890 External Interfaces..........................................................................................................21 BS8700 Software Structure........................................................................................................22 NetNumen M31 Elements Management System.......................................................................26
IV
TABLES
Mechanical Sizes of ZXSDR BS8700...........................................................................................7 Main Board List of Baseband Unit...............................................................................................9 Table of CC Panel Interfaces......................................................................................................10 Table of FS Panel Interfaces .....................................................................................................12 Table of SA Panel Interfaces......................................................................................................13 Table of SE Panel Interfaces .....................................................................................................14 Table of NIS Panel Interfaces.....................................................................................................14 Table of PM Panel Interfaces .....................................................................................................15 R8840 External Interface............................................................................................................17 Description of External interfaces.............................................................................................18 Description of External interfaces.............................................................................................20 Description of External interfaces.............................................................................................21 Description of ZXSDR BS8700 External Interfaces..................................................................23 ZXSDR BS8700 Technical Indices.............................................................................................24 ZXSDR BS8700 Configuration for GSM Single Mode (Multi-carrier).......................................30 ZXSDR BS8700 Configuration UMTS Single Mode (R8840/R8880).........................................30 ZXSDR BS8700 Configuration UMTS Single Mode (R8860/R8860E).......................................31 ZXSDR BS8700 Configuration UMTS Single Mode .................................................................31 BS8700 Configuration for G/U Dual-Mode (Same Spectrum)..................................................31 BS8700 Configuration for G/U Dual-Mode (Different Spectrums)..........................................32
Overview
BSC
In general, GSM/EDGE/UMTS system consists of Core Network (CN), Radio Network (GERAN/UTRAN) and Mobile Station/User Equipment (MS/UE). GERAN/UTRAN includes 2 network elements, base station and BSC/RNC. The conventional 2G/3G BS connects to BSC/RNC via Abis/Iub interface. Figure 1 shows a conventional GSM/EDGE/UMTS network system.
MGW GSM MS Node B BS 3G UTRAN Only MSCS PSTN
Figure 1
In Figure 1, GPRS/EDGE and UTRAN are two separated radio networks. When ZTE 2G/3G dual-mode base station is introduced, the 2G/3G radio networks will be converged into one and this will decrease the network construction cost greatly. The GSM/UMTS integrated network is shown in the following Figure 2.
SDR BS flexibly configured as a GSM and UMTS system with only software configuration Software Defined Radio for both G/U systems MGW MSCS PSTN
GSM MS
HLR
IP Network GGSN
Figure 2
The purpose of this document is to describe the new-generation distributed Software Defined Radio (SDR) base station ZXSDR BS8700 (hereafter BS8700), which consists of the core BBU (B8200) and series RRUs. BS8700 is based on the ZTE unified MicroTCA platform and adopting MCPA technology radio part, to be the new type of ZTE mobile BS. This revolutionary BS platform supports all kinds of wireless access technology including GSM, UMTS, CDMA2000 WiMAX and LTE. ZXSDR BS8700 can be divided into different types of distributed BS through connecting with different RRUs, according to different networking modes and coverage scenarios.
B8200+R8860/R8860E: Dual mode macro distributed base station, mainly used for outdoor and indoor GSM/UMTS dual mode coverage. B8200+ R8840/R8880/R8890: UMTS mode macro distributed base station, mainly used for outdoor and indoor UMTS mode coverage.
B8200 provides Iub/Abis interfaces with several types of physical interface such as E1/T1, STM-1, FE and GE to connect with RNC/BSC and CPRI interfaces to connect with RRUs. B8200 supports IP transmission and hybrid transport. B8200 provides at most 12 pairs of CPRI optical interfaces to RRUs. B8200 and RRU can support star, chain and mixed networking. In star networking, 12 optical interfaces can connect to 12 RRUs. In chain networking, RRU can cascade up to 4 levels. The networking diagram including B8200, RNC/BSC and RRU is shown in .
FE/GE
Figure 3
In chain and loop networking mode, 4 RRU can be maximally cascaded and the maximal distance is 100 Km; The maximal distance between BBU and first RRU can reach 40 Km. Usually its kindly suggested no more than 10 Km.
In the following chapter, a general description will be given to GSM/UMTS dual mode Base Station ZXSDR BS8700.
Product Highlights
ZXSDR BS8700 (hereafter BS8700) is the multi-carrier, dual-mode distributed base station of ZXSDR BS series. By adopting advanced MicroTCA platform and SDR technology, BS8700 can support GPRS/EDGE/E-EDGE and UMTS/HSPA/HSPA+ simultaneously. In the future evolution to LTE, only change baseband processing board and software upgrade. Its main advantage is the flexibility which brings the possibility to support GSM and UMTS on a single base station. Compared with traditional base station, ZXSDR BS8700 has following highlight features: Series RRUs, suitable for multi indoor and outdoor coverage scenarios. Series RRUs with high output power, including R8840, R8860/R8860E, R8880 and R8890. RRU - Compact Design, Light, Easy Installation RRU (R8840) is only 19 liters in volume and 16.5kg in weight under typical power output. It can be mounted on the pole, the wall, the tower top, etc. Natural cooling without fan. No dedicated equipment space is required, easy for site selection, fast network deployment. RRU Installed Near Antenna, Saving Feeder Loss, Enhancing Coverage Series RRU can be remotely installed near the antenna system to lower the feeder loss. The coverage gain can reach more than 3dB compared with traditional macro base station.
BBU - Plug-in Design for Shelf, Zero Footprint, Convenient Deployment B8200 adopts Plug-in design with 19 inch, 2U in height and 8.75 kg in weight. It can be conveniently mounted on the wall, ground, or in the 19 inch rack, etc.
Shared Baseband Resources, Dynamic Traffic Adjustment Suitable for traffic transferring dynamically or outburst areas, such as CBD, uptown or beauty spots, avoiding resources waste.
Various Interfaces, Flexible Networking ATM/IP dual protocol stacks, providing with various interfaces such as E1/T1/STM1/GE etc. It supports SDH networking, hybrid transmission and all-IP networking.
G/U dual-mode Configuration, Smoothly Evolve to Future Network Supports GSM/GPRS/EDGE/ E-EDGE/UMTS/HSPA/HSPA+.
R8860/R8860E has the capability to support 6 GSM TRX or 4 UMTS carriers. If GSM and UMTS are configured at the same spectrum, each radio unit supports 4 GSM TRX + 1 UMTS carrier.
3
3.1
Functionality
Basic Functions
BS8700 supports the following basic functions on Um/Uu, Abis/Iub and O&M interfaces.
On Um/Uu interface, BS8700 supports UE access and radio link transmission including RF processing, channel coding and decoding, channel multiplexing and de-multiplexing, measuring and reporting, power control, transmit diversity, receiving diversity, calibration and synchronization. Via Abis/Iub interface, BS8700 connects with BSC/RNC and supports the following functions including cell management, BS measurement information report, system Information broadcast, access control implementation from BSC/RNC, mobility management, radio resource management and control, FP process and ATM transmission management. On operating and maintenance interface, BS8700 provides system management functions including configuration management, alarm management, status check and system monitor.
The receiving part adopts Viterbi algorithm for coding to improve Channel decoding capability and system receiving sensitivity. Supports frequency hopping. Supports DTX sending and decreasing transmitting power, lowering the total interference in the air. Supports common BCCH; different carriers can be used for different services and they share the same BCCH.
3.2
Service Functions
BS8700 supports the following services:
GSM/GPRS/EDGE/E-EDGE: FR: Full Rate voice service EFR: Enhanced Full Rate voice service HR: Half Rate voice service AMR: Adaptive Multi Rate voice service F9.6: 9.6Kbit/s CS domain data service GPRS/EDGE/E-EDGE
Location service: Support Cell ID, Cell ID+RTT and AGPS location services
R99 service: CS domain service: 8 Kinds of AMR voice service, CS 64Kbps PS domain service: UL/DL 64Kbps, UL/DL 128Kbps, UL/DL 384Kbps Concurrent service: CS domain (AMR 12.2Kbps, CS 64Kbps) + PS domain (64Kbps, 128Kbps, 384Kbps)
HSDPA Service: Support Data rate 14.4Mbps Support 15 codes Support HSDPA and R99 on both independent and shared carriers
Support intra-frequency, inter-frequency handover and handover between HSDPA and R99 Support concurrent services Support streaming services
MBMS Service: Support broadcast and multicast functions, multicast supports PtP and PtM Support mobility management Support streaming, background MBMS services
HSPA+ Service: 21.6Mpbs Downlink data with 64QAM 28.8Mpbs Downlink data with 16QAM + 2*2 MIMO 43.2Mpbs Downlink data with 64QAM + Dual Cell combination
4
4.1
System Architecture
Product Physical Structure
ZXSDR BS8700 consists of the BBU (B8200) and series of RRUs. The physical structures of ZXSDR BS8700 in different combinations are shown in :
Figure 4
4.2
Hardware Architecture
BS8700 hardware architecture is shown in .
Antenna
CC
RF Unit
Figure 5
The BBU of ZXSDR BS8700 can be configured in GSM/UMTS single mode and G/U dual-mode. It supports up to 30 CS in UMTS single mode, providing 1920 CE base-band processing capability DL/UL separately, up to 60 TRX in GSM single mode. There are 4 kinds of ZXSDR BS8700 RRUs:
R8840 2 receiving paths and 1 transmitting path (1T2R). Each one can support 1 sector in UMTS on 2100MHz/AWS. Its output power achieves 60W (TOC). It is mainly used for outdoor macro coverage and also used for indoor coverage signal source. R8840 can support 3 carriers when it ensures 20W output power for each carrier. R8860/R8860E 2 receiving paths and 1 transmitting path (1T2R). Each one can support 1 sector in GSM/UMTS on 850/900/1800/1900MHz. Its output power achieves 80W (TOC). It is mainly used for outdoor macro coverage and also used for indoor coverage signal source. R8860/R8860E can support 4 carriers when it ensures the 20W output power for each carrier. R8880 2 receiving paths and 2 transmitting paths. Each one can support 2*2 MIMO in HSPA+ mode on 2100MHz. Its output power achieves up to 2*60W (TOC). It is mainly used for outdoor macro coverage and also used for indoor coverage signal source. R8880 can be configured as UMTS mode. R8880 can support 3 carriers when it ensures the 2*20W output power for each carrier. R8890 6 receiving paths and 3 transmitting paths (3T6R). Each one can support 3 sectors in UMTS mode on 2100MHz. Its output power achieves up to 3*60W (TOC). It is mainly used for outdoor macro coverage and also used for indoor coverage signal source. R8890 can support 3 carriers 3 sectors when it ensures 20W output power for each CS.
4.2.1
Baseband Unit
Baseband unit in BS8700 is responsible for processing the baseband signals.
PM
FSS
UBPG/BPC FAM
SA CC
Figure 6
The Baseband unit consists of control & clock board, fabric switch board, baseband processing board, site alarm board (optional), site alarm extension board, network Interface of STM-1 board (optional), power module, and fan module.
Table 2 Main Board List of Baseband Unit Board Name CC FS UBPG BPC SA SE NIS PM FAM Function Description Control & Clock Board Fabric Switch Board Universal Baseband Processing board for GSM Base band Processing Board Type C for UMTS Site Alarm Board Site alarm Extension Board Network Interface of STM-1 Board Power Module FAN Module
4.2.1.1
Figure 7
CC Panel
Table 3 Table of CC Panel Interfaces Interface Name ETH0 ETH1 TX/RX EXT REF Description Ethernet interface between BS8700 and BSC/RNC, adapting interface of 10M/100M/1000M. Ethernet interface used for cascading, debugging or local maintenance, adapting interface of 10M/100M/1000M. Used for Ethernet interface connection between BS8700 and BSC/RNC. This interface is 100M/1000M Ethernet optical interface. External communication port, connected to external receiver, Mainly 485PP1S+/2M+ interfaces. External connection GPS antenna, SMA(F) interface
4.2.1.2
UBPG Board
UBPG is the GSM baseband processing board. It processes the physical layer protocol and frame protocol specified by 3GPP. UBPG panel is illustrated in 4.2.1.
10
Figure 8
UBPG Panel
4.2.1.3
BPC Board
BPC is the UMTS baseband processing board. It processes the physical layer protocol and frame protocol specified by 3GPP. BPC panel is illustrated in 4.2.1.
Figure 9
BPC Panel
11
Downlink data coding/multiplexing, rate matching, channel mapping, spreading and scrambling, power adjusting, and channel compositing. Uplink signal RAKE receiving and channel decoding Radio link synchronization and Frame processing Measuring parameters required in power control and handover Softer handover and carrier diversity. Communicating with the CS via the Ethernet interface Reading all the hardware management identifiers, including the backplane type number, slot number, board function type, board version, board function configuration identifier, and the CPU serial number
4.2.1.4
Figure 10 FS Panel.
12
Exchange CPU interface signaling through HDLC interface with RU module MicroTCA protocol based module management function
4.2.1.5
Table 5 Table of SA Panel Interfaces Interface Name Description 8 E1/T1 interfaces, 1 RS485, 1RS232 interface, 6+2 dry contacts ( 6 input interfaces, 2 input&output interfaces )
4.2.1.6
Figure 12 SE Panel
Table 6 Table of SE Panel Interfaces Interface Name Description 8 E1/T1 interfaces, 1 RS485, 1RS232 interface, 6+2 dry contacts ( 6 input interfaces, 2 input&output interfaces )
SE shares the bottom-right slot with UBPG/BPC and has the following functions:
Provide E1/T1 transmission interfaces for Iub. Provide site alarm monitoring interfaces.
It is used to extend the port number if SA can not fulfill the requirements.
4.2.1.7
4.2.1.8
14
Figure 14 PM Panel
4.2.1.9
15
4.2.2
Radio Unit
Radio unit main process the conversion between baseband signals and RF signals. In the BS8700, radio unit has four kinds, respectively are: R8840, R8860/R8860E, R8880 and R8890. R8840 is the UMTS only radio frequency module, which works in UMTS on 2100MHz. R8860/R8860E is the multi-carrier radio frequency module, which can work in GSM only, UMTS only or G/U dual mode via software configuration. R8880 is the UMTS only radio frequency module, and each module supports 2*2 MIMO in UMTS mode on 2100MHz. R8890 is UMTS only radio frequency module, which support 3 sectors on 2100MHz. The following will show the details. In the BS8700, CFR(Crest Factor Reduction)algorithm, DPD(Digital Pre-Distortion) algorithm and Advanced-Doherty PA technique are adopted to improve PA linearity and EVM/RCDE performance, the output power is not affected by modulation mode.
4.2.2.1
R8840
R8840 is a UMTS multi-carrier radio unit, working on 2100MHz/AWS, supporting upgrade to LTE via software upgrade. R8840 supports maximum 4 carriers, the output power is 60W. R8840 module consists of MCPA (multi-carrier power module) module, transceiver module, duplex filter LNA and RPWAC/DC (Power for AC or DC). There are one TX/RX port and one RX port for connecting antenna. R8840 employs compact cabinet design, as shown in Figure 16. Dimension of R8840 is 370320160mm (HWD).
The external interfaces of R8840 system are integrated at the bottom of the equipment, as shown in Figure 17. The interface description is shown in the following table.
16
Table 9 R8840 External Interface S.N. 1 2 3 4 5 Label LC1 LC2 AISG Monitor PWR Interface BBU and RRU Interface /RRU cascading interface BBU and RRU Interface /RRU cascading interface AISG interface External device interface Power supply interface Interface Type / Connector LC-mode optical interface (IEC 874) LC-mode optical interface (IEC 874) 8-core aerial socket (IEC 60130-9-ED) 37-pin aerial socket AC interface: Connector XCE18T3K1P1-02+FJJP1-7.5 Cable section area: 3*1mm2 DC interface: Connector XCG18T4K1P1-01+XC18FJJP1-10.5 Cable section area: 4*1.5mm2 50 N-mode connector 50 N-mode connector N-KY (MIL-C-39012 or IEC169-16) N-KY (MIL-C-39012 or IEC169-16) Cable section area: 16mm2
6 7 8 9 10
Interface to receive diversity RF cable Interface to transmit / receive main diversity RF cable Frequency extension interface Frequency extension interface Equipment grounding
4.2.2.2
R8860/R8860E
R8860/R8860E is multi-carrier RF module, working on 850/900/1800/1900MHz, supporting upgrade to LTE via software upgrade. R8860/R8860E can be configured as GSM only, UMTS only or mixed mode module. R8860/R8860E can be configured to 1 to 6 TRX in GSM mode. In case of GMSK modulation, 80W TOC output power can be provided. If R8860/R8860E is used as UMTS mode, it can support 4 carriers with 80W
17
TOC output power. In mixed mode, R8860/R8860E can support 4 GSM TRX and 1 UMTS carriers or 2 GSM TRX and 2 UMTS carriers. R8860/R8860E module consists of MCPA module, transceiver module, and duplex filter LNA. There are one TX/RX port and one RX port for connecting antenna. R8860/R8860E employs compact cabinet design, as shown in Figure 18. Dimension of R8860/R8860E is 370320197 mm (HWD).
R8860/R8860E external interface locates at the bottom of the cabinet, as shown in 4.2.2. The interface description is shown in Table 10.
Table 10 Description of External interfaces S.N. 1 2 Label LC1 LC2 Interface BBU and RRU Interface /RRU cascading interface BBU and RRU Interface Interface Type / Connector LC-mode optical interface (IEC 874) LC-mode optical interface (IEC 874)
18
S.N. 3 4 5
Interface /RRU cascading interface AISG interface External device interface Power supply interface
Interface Type / Connector 8-core aerial socket (IEC 60130-9-ED) 37-pin aerial socket DC interface: Connector XCG18T4K1P101+XC18FJJP1-10.5 Section area of cable is 4*1.5mm2 50 DIN-mode connector 50 DIN-mode connector N-KY (MIL-C-39012 or IEC169-16) N-KY (MIL-C-39012 or IEC169-16) Cable section area: 16mm2
6 7 8 9 10
Interface to receive diversity RF cable Interface to transmit / receive main diversity RF cable Frequency extension interface Frequency extension interface Equipment grounding
4.2.2.3
R8880
R8880 is a multi-carrier RF module. R8880 can be configured as UMTS mode, supporting upgrade to LTE via software upgrade. It can process 2 received signals and 2 transmitted signals. Each one can support 2*2 MIMO in HSPA+ mode on 2100MHz. Its output power achieves up to 2*60W (TOC). It is mainly used for outdoor macro coverage and also used for indoor coverage signal source. R8880 can be configured as UMTS mode. R8880 can support 3 carriers when it ensures the 2*20W output power for each carrier. R8880 employs compact cabinet design, as shown in the following figure. R8880 is 420 340140 mm (HWD) and 20Kg in weight.
R8880 external interface locates at the bottom of the cabinet, as shown in the following figure. The interface description is shown in the following table.
19
Table 11 Description of External interfaces S.N. 1 2 3 4 5 Label OP1 OP2 AISG Mon PWR Interface BBU and RRU Interface /RRU cascading interface BBU and RRU Interface /RRU cascading interface AISG interface External device interface Power supply interface Interface Type / Connector LC-mode optical interface (IEC 874) LC-mode optical interface (IEC 874) 8-core aerial socket (IEC 60130-9-ED) 37-pin aerial socket DC interface: Connector XCG18T4K1P101+XC18FJJP1-10.5 Section area of cable is 4*1.5mm2 50 DIN-mode connector 50 DIN-mode connector Cable section area: 16mm2
6 7 8
Interface to transmit/receive diversity RF cable Interface to transmit / receive diversity RF cable Equipment grounding
4.2.2.4
R8890
R8890 is a multi-carrier RF module. R8890 can be configured as UMTS mode, supporting upgrade to LTE via software upgrade. It processes 6 received signals and 3 transmitted signals. Each one can support 3 sectors in UMTS mode on 2100MHz. Its output power achieves up to 3*60W (TOC). It is mainly used for outdoor macro coverage and also used for indoor coverage signal source. R8890 can support 3 carriers 3 sectors when it ensures the 20W output power for each carrier. For the available time of R8890, please refer to <ZTE GSM&UMTS Roadmap>.
20
R8890 employs compact cabinet design, as shown in the following figure. R8890 is 385 452155mm (HWD) and 28Kg in weight.
R8890 external interfaces locate at the bottom of the cabinet, as shown in the following figure. The interface description is shown in the following table.
Table 12 Description of External interfaces S.N. 1 2 3 4 Label LC1 LC2 AISG Mon Interface BBU and RRU Interface /RRU cascading interface BBU and RRU Interface /RRU cascading interface AISG interface External device interface Interface Type / Connector LC-mode optical interface (IEC 874) LC-mode optical interface (IEC 874) 8-core aerial socket (IEC 60130-9-ED) 37-pin aerial socket
21
S.N. 5 6 7 8 9 10 11
Interface Interface to receive diversity RF cable Interface to transmit / receive main diversity RF cable Interface to receive diversity RF cable Interface to transmit / receive main diversity RF cable Interface to receive diversity RF cable Interface to transmit / receive main diversity RF cable Power supply interface
Interface Type / Connector 50 DIN-mode connector 50 DIN-mode connector 50 DIN-mode connector 50 DIN-mode connector 50 DIN-mode connector 50 DIN-mode connector DC interface: Connector XCG18T4K1P101+XC18FJJP1-10.5 Section area of cable is 4*1.5mm2
4.3
Software Architecture
The software system of BS8700 consists of operating support layer and application layer.
The operating support layer provides the functions of OAM, DBS, BRS, BRACS, and SCS to serve different base station mode.
OAM (Operating and Maintenance) provides the configuration, alarm and performance measurement function.
22
DBS (Data Base Sub-system) provides the database function. BRS (Bearer Sub-system) provides protocol stack processing function. BRACS (Bearer Access Control Sub-system) provides the function of access control on bear layer. SCS (System Control Sub-system) provides functions of power control/supply and active/standby switching.
Operation Support Sub-system is the support layer in this framework, which is a hardware independent platform for running software and providing basic functions like scheduling, timer, memory management, communication, sequencing control, monitoring, alarming and logging. BSP (Board Support Package) supports the information routing to the GSM, UMTS, LTE and common parts in the application layer.
4.4
External Interface
ZXSDR BS8700 has abundant external interfaces which are described in Table 3.
Table 13 Description of ZXSDR BS8700 External Interfaces Interface Item STM-1 E1/T1 Index 2 (optional) 16 (8pairs optional) 1 (10M/100M/1000M electrical) Auto-Negotiation Auto-MDI/MDIX 1 (1000M optical) or 1 (100M optical) Clock Baseband Monitor & Alarm RF Monitor & Alarm GPS Dry Contacts RS485 Dry Contacts RS485 1 6 (Input), 2 (Input / Output) 1 4 per RRU 1 per RRU Interface Type SFP (LC) DB44 RJ45 Standard ITU G.957 ITU G.707 ITU G.703/G.704 10/100/1000BASE-T IEEE 802.3 compatible 1000BASE-LX IEEE 802.3 compatible 100BASE-FX IEEE 802.3 compatible GPS Antenna Interface NMEA 0183 V3.0 -
Abis/Iub Ethernet
SFP (LC)
23
Technical Indices
Table 14 ZXSDR BS8700 Technical Indices Type Item Working Frequency Indices R8840 R8860/R8860E R8880 R8890 Max Carrier/Sector Max Carrier/TRX Max Channel Element for UMTS Max Channels Per Cell for UMTS Max Throughput RRU Type Output Power R8840 R8860/R8860E R8880 R8890 Receiving Sensitivity 2100 MHz/AWS 850/900/1800/1900 MHz 2100 MHz 2100 MHz 30 CS (UMTS single mode) 60 TRX (GSM single mode) UL: 960/1920 CE DL: 960/1920 CE 123 UL: 86.5 Mbps DL: 324 Mbps Output Power (TOC) 60W 80W 2*60W 3*60W
-113dBm@GSM Single Antenna -126.5dBm@UMTS single antenna -129.2dBm@UMTS double antennas B8200 -48V DC (-57VDC ~ -40VDC) -48V DC (-60VDC ~ -35VDC) 220 V AC (90VAC ~ 300VAC) 110 V AC (85VAC ~ 135VAC) -48V DC (-57VDC ~ -37VDC) -48VDC (-60 V DC~ - 37VDC) 220VAC (165VAC~ 300VAC) 110VAC (85VAC ~ 135VAC) Typical Power Consumption (W) 80 115 150 185 100 125 160
Power Indices
R8840
R8860/R8860E R8880/R8890
Type B8200 6CS/1 BPC B8200 12CS/2 BPC B8200 18CS/3 BPC B8200 24CS/4 BPC R8840 1C/TOC 20W R8840 2C/TOC 40W R8840 3C/TOC 60W
24
R8880 S1/TOC 20W R8880 S2/TOC 40W R8880 S3/TOC 60W R8890 S111/TOC 3*20W R8890 S222/TOC 3*40W R8890 S333/TOC 3*60W GSM Single Mode G/U DualMode Temperature R8860/R8860E S1/TOC 20W R8860/R8860E S2/TOC 40W R8860/R8860E S4/TOC 80W R8860/R8860E 4G1U/TOC 4*15W (GSM)+20W (UMTS)
100 135 165 210 315 405 185 195 215 215
BBU: -20C+55C RRU: R8840/R8860/R8860E/R8880: -40C+55C R8890: -40C+50C BBU: 5%95% RRU: R8840/R8860/R8860E: 5% ~ 100% R8880/R8890: 10% ~ 100% BBU: IP20 RRU: IP65 5 YD/T 1595.2-2007 ETSI EN 301 489-01, ETSI EN 301 489-23 ETSI EN 300 386V1.3.2 (CISPR22) Class B Directive 1999/5/EC (R&TTE) BBU: 233,000 hours R8840: 420,000 hours R8860/R8860E: 380,000 hours R8880: 322,000 hours R8890: 280,000 hours BBU: 0.5 hours RRU: 1 hours BBU: 99.999785% R8840: 99.999762% R8860/R8860E: 99.999868% R8880: 99.999689% R8890: 99.999643% BBU: 1.128 min/year R8840: 1.251 min/year R8860/R8860E: 1.383 min/year R8880: 1.632 min/year R8890: 1.877 min/year
Environment Indices
Relative Humidity
EMC Indices
MTBF
Down Duration
25
NMS/OSS
NOP
Alar m
Conf.
Versi on
Topolog y
Securit y
Toolset
NetNumen M31
GSM BSS
UMTS UTRAN
LTE E-UTRAN
Network Element
The BSS/UTRAN/E-UTRAN provides a transparent channel to implement operation and maintenance information interaction between NetNumen M31 and the radio network. Management of the BSC/RNC and the BTS/Node B/eNode B adopts unified client interface for security management and operation log. NetNumen M31 also supports CORBA/SNMP Itf-N interface towards third-part NMS. BS8700 operation and maintenance system supports the following functions: Version Management
With this function, administrator can view versions of the all software and hardware running at the foreground. The hardware version includes the BOOT version number and its generation time. The software version includes the software version number, download time and its current running state.
26
The background provides a software downloading system for software download/upgrade at the foreground. Before download/upgrade, warehousing processing is required. The warehousing process will copy the version files to the server and register to the server. Software versions existing in the base stations can be activated with or without software tests. Alarm Management
The alarm management system monitors running states of the base stations, dynamically displays the rack structure of the foreground module and collects abnormal information of the boards, links, database and server in real time. These functions make it convenient to analyze, address the problems, maintenance and repair. Information collected by the alarm management system includes notification, alarm and alarm recovery. The alarm management system synchronizes alarms, reports historical alarms and current alarms, and sets and queries alarm shielding. Configuration Management
Configuration management implements functions of equipment configuration and radio configuration. Log Management
NetNumen M31 system provides the log management function. Any operation performed by operator will be recorded automatically. Thus, the operation maintenance administrator can query historical operation records. Log records are saved in the NM database server. In the BS8700, it has memory on CC board in order to preserve database, the storage time is 90 days. Security Management
Security management is implemented through user management and user group management. The user management includes the management for user name, password and user groups which the user belongs to. The user group management includes the management of user group name and authority information (indicating authorities the user group has). Performance Management
Performance management is to measure, report and provide performances statistic of base stations. Diagnosis and Test
Diagnosis and test are important components of EMS. The network administrator can check whether system hardware is working properly by diagnosis and test. They are also able to trace and fix the faults on time to secure the safe operation of the system.
ZTE Confidential Proprietary 2011 ZTE Corporation. All rights reserved. 27
Base station diagnosis and test cover the following functions: Information reporting Board link testing Receiving field strength testing Environment information monitoring
The operation and maintenance system also provides other supplementary functions to facilitate base station maintenance, which include but not limited signaling tracing, channel viewing, abnormal record reporting and viewing. In ZXSDR BS8700, the time of impact on service because of the hardwares brokendown is under control. ZXSDR BS8700 has auto restart mechanism which supports Radio Unit auto restart, main control board auto restart, Baseband processing unit auto restart, the whole base station auto restart. The Radio Unit auto restart time is one minute. The main control board which is CC board auto restart time is 3 minutes. The Baseband processing unit that includes UBPG and BPC board auto restart time is one minute. The whole base station auto restart time is 4 minutes.
28
7
7.1
Configuration Principles
Baseband Unit Configuration Principles
Different baseband processing boards can be configured in BS8700 baseband unit for different scenario. UBPG board supports GSM/GPRS/EDGE/E-EDGE. BPC board supports UMTS/HSPA/HSPA+. The processing capability of baseband processing boards is listed as below:
Single UBPG board supports GSM/GPRS/EDGE/E-EDGE 12TRX; Single BPC supports 6CS, uplink 192/384CE and downlink 192/384CE;
In typical configuration, the BS8700 baseband unit provides 4 baseband processing board slots. 1 more BP board can be available if only one optical switch board is configured. FS: Fabric Switch board, there are 6 pairs CPRI interface in each FS board, 2 FS boards can be configured in B8200 maximally. SA: Site Alarm board, support 8 dry contacts and 8 pairs of E1/T1, 1 SA board for each B8200 is mandatory configuration. SE: Site Alarm Extension board, support 8 dry contacts and 8 pairs of E1/T1, 1 SE board can be configured if the requirements of dry contacts or E1/T1 exceed the SA capacity. NIS: Network Interface of STM-1 board, configured when Abis/Iub adopts STM-1 interface. PM: Power Module, 1 PM board for default configuration, if needed, 1+1 is available option. FAM: Fan array Module, 1 FAM board for each B8200 is mandatory configuration. CC: Control and Clock board, 1 CC board for default configuration, if needed, 1+1 backup or load sharing is an available option. One Control and Clock board supports 01 FE/GE electrical interfaces and 01 FE/GE optical interfaces toward BSC (Abis) and RNC(Iub).
7.2
29
If GSM/UMTS are in the dual mode, single R8860/R8860E can support 1 UMTS Carriers + 4 GSM TRX or 2 UMTS Carriers + 2 GSM TRX at maximum;
7.3
7.3.1
R8860/R8860E configuration
Table 15 ZXSDR BS8700 Configuration for GSM Single Mode (Multi-carrier) Site Type S4/4/4 S8/8/8 S12/12/1 2 R8860/R8860E Qty 3 6 9 B8200 Qty 1 1 1 UBPG Qty 1 2 3
7.4
7.4.1
Table 16
R8840/R8880 configuration
ZXSDR BS8700 Configuration UMTS Single Mode (R8840/R8880) Site Type S1/1/1 S2/2/2 R8840/R8880 Qty 3 3 B8200 Qty 1 1 BPC Qty 1 1
30
S3/3/3 S2/2/2/2/2/2
3 6
1 1
2 2
7.4.2
Table 17
R8860/R8860E configuration
ZXSDR BS8700 Configuration UMTS Single Mode (R8860/R8860E) Site Type S1/1/1 S2/2/2 S4/4/4 S2/2/2/2/2/2 R8860/R8860E Qty 3 3 3 6 B8200 Qty 1 1 1 1 BPC Qty 1 1 2 2
7.4.3
Table 18
R8890 configuration
ZXSDR BS8700 Configuration UMTS Single Mode Site Type S1/1/1 S2/2/2 S3/3/3 S2/2/2/2/2/2 R8890 Qty 1 1 1 2 B8200 Qty 1 1 1 1 BPC Qty 1 1 2 2
7.5
7.5.1
Table 19
BS8700 Configuration for G/U Dual-Mode (Same Spectrum) Site Type G:S444+U:S111 G: S222+U:S222 G: S666+U:S333 R8860/R8860 E Qty 3 3 6 B8200 Qty 1 1 1 UBPG Qty 1 1 2 BPC Qty 1 1 2
31
7.5.2
Table 20
BS8700 Configuration for G/U Dual-Mode (Different Spectrums) Site Type U:S222(2100M) + G:S6/6/6(850/900/1800/1900M ) R8840/R888 0 Qty 3 R8860/R8860 E Qty 3 B8200 Qty 1 UBPG Qty 2 BPC Qty 1
32
33
Abbreviations FAM FE FP FR FS GE GERAN GPS GSM HR HSPA+ LMT LTE MicroTCA MIMO MS/UE MTBF MTTR NBAP NIS NM NMS NOP OAM OPEX OSS PM PS PtM PtP RCS RF
Full Characteristics Fan Module Fast Ethernet Frame Protocol Full Rate Fabric Switch Gigabit Ethernet GSM Edge Radio Access Network Global Positioning System Global System for Mobile communications Half Rate HSPA Evolution Local Maintenance Terminal Long Term Evolution Micro Telecommunications Computing Architecture Multi Input Multi Output Mobile Station/User Equipment Mean Time Between Failures Mean Time To Recovery Node B Application Part Network Interface of STM-1 NetNumen, Name of ZTE OMCR Network Management System Network Optimization & Planning Operating And Maintenance Operation Expenditure Operation Support Sub-system Power Module Packet Switch Point to Multi-point Point to Point Radio Control Sub-system Radio Frequency
34
Abbreviations RNC RRU RTT SA SCS SDH SDR SE SNMP TA TNS UBPG UL UTRAN WCDMA
Full Characteristics Radio Network Controller Remote Radio Unit Round Trip Time Site Alarm System Control Sub-system Synchronous Digital Hierarchy Software Defined Radio Site Alarm Extension Simple Network Management Protocol Time Advance Transport Network Sub-system Universal Base band Processing for GSM Up Link UMTS Terrestrial Radio Access Network Wideband Code Division Multiple Access
35