You are on page 1of 4

PROJECT: MICROSOFT - 1200mm dia.

WTP (WL 715T)


GROUND ENGINEERING PTE LTD Bearing capacity check on Top Soil Length of Supporting Kentledge Leg on Each Side Width of Supporting Kentledge Leg on Each Side Height of Supporting Kentledge Leg on Each Side Length of Steel Plate in Contact with Ground on Each Side Width of Steel Plate in Contact with Ground on Each Side Area of Direct Bearing on Soil Bearing Pressure on Soil Estimated Unit Weight of Top Soil Estimated cohesion of Top Soil Estimated Internal Friction of Top Soil Bearing Capacity Factor Bearing Capacity Factor Bearing Capacity Factor Ultimate Bearing Capacity Geotechnical Factor of Safety Provided Bearing Capacity Check on Underlying Soft Soil Depth of Soft Soil from Ground Level Depth of Water Table from Ground Level Length of Spread of Load onto Soft Soil on Each Side Width of Spread of Load onto Soft Soil on Each Side Area of Spread of Load Bearing on Underlying Soft Soil Bearing Pressure on Underlying Soft Soil Estimated Unit Weight of Soft Soil Estimated Cohesion of Soft Soil Estimated Internal Friction Angle of Soft Soil Effective Surcharge at Underlying Soft Soil Level Bearing Capacity Factor Bearing Capacity Factor Bearing Capacity Factor Ultimate Bearing Capacity Geotechnical Factor of Safety Provided
(Estimated) (Estimated) (Estimated) (Estimated) (Estimated)

Sheet No: Date: Designed by: Checked by:

1 09-01-13 Utaya Kumar Jeffrey Yu

L B H L B A q g Cu f Nc Nq Ng qu F.O.S.

= = = = = = = = = = = = = = =

12 4.5 2.25 12 4.5 54 183.61 19 9 0 5.7 1 0 55.148 0.30

m m m m m m2 kN/m2 kN/m3 kN/m2

BH Working Load Total test load Use 20 Note:

= 15 Test Pile diameter: 1200 mm = 715 ton Plus 10 % ; Test to 2 times = 15730 kN nos of Secondary Beam & 2 nos of Main Beam

23 kN/m3 for Concrete Kentledge Legs B.S. 648: 1964 gc = A = L x B q = { [( 1+%add)xN] + (S.W. x nc x LT)+(B x H x L x gc)}/(2 x A)

Based on Relevant Borehole from SI Report Estimated Unit Weight, Cohesion and Friction of Soil

kN/m2 <1.5 NOT OK!

qu = CuNc x (1+ 0.2B/L)+qNq + 0.4BgNg F.O.S. = qu/q

Terzaghi's Equation

Ds Dw L B A q g Cu f q Nc Nq Ng qu F.O.S.

= = = = = = = = = = = = = = =

4.5 2.2 16.5 9 148.5 66.768 19 11 0 62.94 5.7 1 0 132.48 1.98

m m m m m2 kN/m2 kN/m3 kN/m2 kN/m2

L B A q

= = = =

L + Ds B + Ds L x B { [( 1+%add)xN] + (S.W. x nc x LT)+(B x H x L x gc)}/(2 x A)

(Estimated) (Estimated)

Based on Relevant Borehole from SI report

q = (g x Dw)+ (g -gw)x (Ds-Dw)

kN/m2 > 1.5 OK!

qu = CuNc x (1+ 0.2B/L)+qNq + 0.4BgNg F.O.S. = qu/q Therefore, provide casing as shown in Figure 1.

Terzaghi's Equation

Note: Stiffeners were Ignored in Web Buckling & Crushing Check as Design is Governed by Bending

PROJECT: MICROSOFT - 1200mm dia. WTP (WL 715T)


GROUND ENGINEERING PTE LTD Therefore, Provide casing as shown below: Total Load = 19,830.11 kN Loading per kentledge leg = 9,915.06 kN Geotechnical capacity provided by casings ( Acting as single pile): (I) Kentledge Left Leg
Skin Friction (kN) L C 172 172 172 172 172 172 172 172 2 3 5 4 5 4 5 4 5 1 1 1 1 1 1 2.51328 2.51328 2.51328 2.51328 2.51328 2.51328 2 3 5 2 3 5 2 3 5 Point Bearing - on completely weathered granite (kN) C A ( r) 9C (kN/m) Aq' 0.502656 172 1548 778.111488 778.111488 0.502656 172 1548 778.111488 778.111488 0.502656 172 1548 778.111488 778.111488 0.502656 172 1548 778.111488 778.111488

Sheet No: Date: Designed by: Checked by:

1 09-01-13 Utaya Kumar Jeffrey Yu

Dia(m)

Meter 0 to 2.0

SPT 4 5

1 1

D 2.51328 2.51328

x D x C x L 864.57 1296.85 2161.42 864.57 1296.85 2161.42 864.57 1296.85 2161.42 864.57 1296.85 2161.42

Total

0.8

2.0 to 5.0 Total 0 to 2.0

2,939.53

0.8

2.0 to 5.0 Total 0 to 2.0

2,939.53

0.8

2.0 to 5.0 Total 0 to 2.0

2,939.53

0.8

2.0 to 5.0 Total

Total
qu = *D(C)L+ + *(r)q'N+ = 11,758.13 kN > 9,915.06 kN OK!

2,939.53 11,758.13

PROJECT: MICROSOFT - 1200mm dia. WTP (WL 715T)


GROUND ENGINEERING PTE LTD

Sheet No: Date: Designed by: Checked by:

1 09-01-13 Utaya Kumar Jeffrey Yu

(II) Kentledge Right Leg


Skin Friction (kN) L C 172 172 172 172 172 172 172 172 2 3 5 4 5 4 5 4 5 1 1 1 1 1 1 2.51328 2.51328 2.51328 2.51328 2.51328 2.51328 2 3 5 2 3 5 2 3 5 Point Bearing - on completely weathered granite (kN) C A ( r) 9C (kN/m) Aq' 0.502656 172 1548 778.111488 778.111488 0.502656 172 1548 778.111488 778.111488 0.502656 172 1548 778.111488 778.111488 0.502656 172 1548 778.111488 778.111488 2,939.53 11,758.13 2,939.53 2,939.53 2,939.53

Dia(m)

Meter 0 to 2.0

SPT 4 5

1 1

D 2.51328 2.51328

x D x C x L 864.57 1296.85 2161.42 864.57 1296.85 2161.42 864.57 1296.85 2161.42 864.57 1296.85 2161.42

Total

0.8

2.0 to 5.0 Total 0 to 2.0

0.8

2.0 to 5.0 Total 0 to 2.0

0.8

2.0 to 5.0 Total 0 to 2.0

0.8

2.0 to 5.0 Total

Total
qu = *D(C)L+ + *(r)q'N+ = 11,758.13 kN > 9,915.06 kN OK!

PROJECT: MICROSOFT - 1200mm dia. WTP (WL 715T)


GROUND ENGINEERING PTE LTD

Sheet No: Date: Designed by: Checked by:

1 09-01-13 Utaya Kumar Jeffrey Yu

**

Each kentledge leg requires 4 numbers of 800mm diameter and depth of steel casing. Total 8 numbers steel casings are required for temporary setting up of kendledge. Refer to Figure below.

2.25m

2.25m

2.0 m Dia 800mm 5.0 m 1.6m Dia 800mm 5.0 m 12 m 1.6m Dia 800mm 5.0 m 1.6m Dia 800mm 5.0 m 2.0 m 4.5m Dia 1200 mm Working Test Pile 12 m

2.0 m Dia 800mm 5.0 m 1.6m Dia 800mm 5.0 m 1.6m Dia 800mm 5.0 m 1.6m Dia 800mm 5.0 m 2.0 m 4.5m

You might also like