Professional Documents
Culture Documents
http://blog.starcircleacademy.com/2010/10/exposing-for-stars/
In two previous articles I covered the most common problems that face anyone doing long exposures. In part 1 of 2 I discussed: Poor Focus, Dim Stars (low contrast), Strange Colors and Pink or Purple glow. In part 2 of 2, I tackled gaps in star trails, and noise. It seems like I have omitted a rather important element: how to choose your exposure settings in the first place. An astute Flickr user asked What is the Best ISO for Stacking Startrails. Good question and I realize I have not approached the question from that point of view starting from the beginning, that is. So pay a little attention here and I will hopefully demystify that question for you. First, the answer will always be it depends. Just as with daylight or indoor exposures the settings to pick depend on the conditions. Is there a bright moon? Is there a strong sky glow from light pollution? How well does your camera manage noise? How cold (or warm) is it? Are there any bright light sources that need to be managed? What is the intended result? Most people attempt to approach a star trail the way they would expose any low light scene. But that approach is flawed. Let me illustrate the germaine elements with a story about my friend, the little star named Drizzle.
12/8/2012 3:03 PM
http://blog.starcircleacademy.com/2010/10/exposing-for-stars/
his brief time over any part of our canvas to leave a noticeable mark. How then can we help little Drizzle make an appearance? Well, we can collect more of Drizzles juice by using a bigger collector (lens). With a bigger lens instead of collecting one droplet at a time, we can collect two or with a really, really big lens perhaps 4 droplets at a time. After all, a bathtub in the rain collects more water in a minute than a thimble will! Sadly we already have the biggest collector we could afford so how else can we help Drizzle? Answer: We will employ the last trick our camera can muster: we can change our canvas so that one droplet leaves a mark as noticeable as though it were 10 times its size. This is what is happening when we change our ISO from 100 to 1000. Oh, I forgot to mention that while we are collecting juice from our starry friends, truly random events occur that cause droplets to appear out of nowhere and plop onto our canvas. We call this noise. The longer we allow our canvas to collect juice, the more random droplets there will be scattered all over our image unwelcome intrusion by the sprinkler from hell. Unfortunately our sky is not completely black. Dust and moisture in the air grab light pollution from distant city lights and make the sky rain droplets everywhere. The stronger the light pollution is the harder it will be for Drizzle to stand out. In fact, when the sky becomes as bright as Drizzle we will not be able to see Drizzle at all. What did we learn from Drizzle, besides sympathy for his plight? 1. If we narrow our aperture we will get fewer noticeable stars. And the stars we do get will stand out less (lower contrast). 2. If we use a bigger (larger diameter) lens we can collect more light and thus see more stars. 3. If we increase our ISO we get more stars, and unfortunately more noticeable noise. 4. The longer we expose the more noise there will be. 5. As the background sky glow increases the dimmer stars will be overwhelmed and there will be insufficient contrast to see them. 6. Eventually an exposure that is too long will wash out the sky and stars. And the most important take away: The number of stars we can capture in an image is unrelated to the length of the exposure because the stars are moving. That last one surprises most people. That is why I highlighted it. I see many folks trying hard to work out the right exposure based on the ambient light. But that is not the correct starting point.
2 of 7
12/8/2012 3:03 PM
http://blog.starcircleacademy.com/2010/10/exposing-for-stars/
Select moderately open apertures for more light and better contrast If possible shoot in cooler ambient temperatures. Where possible select locations with darker skies. I hear you oh impatient one. You wanted to know WHAT EXACT SETTINGS you should use. Try this: f/4, ISO 200, 4 minutes. That should be about right on most nights where there is half or less moon and not too much sky glow. But remember that exposure triplet is for the sky not the foreground. We can refine those settings by answering the following questions and adjusting the exposure, ISO and aperture as indicated. Adjustments to larger ISO are optional. Adjustments to a lower ISO are not except to try and see that failing to reduce ISO or exposure time produces lots o noise. What is the air temperature (Fahrenheit)? Greater than 80 degrees (ISO 4) Between 60 and 80 (ISO 3) Between between 38 and 60 (no change) Below 32 (ISO 2) Below Zero (ISO 4) How bright is my sky (background glow)? About what you would expect less than 20 miles from a large city: ISO 2 and exposure 4, f-stop +1 (1 minute at ISO 100, f/5.6 or f/7.1). It is quite dark but the moon is full (ISO 2) exposure 2 It is dark, but the moon is 1/2 full (no change) Some noticeable sky glow, but I can see the Milky Way (ISO x 2) I sat in the dark for 30 minutes and I literally cannot see my hand in front of my face. I can only tell it is there because it blocks out the star light and I still have sensation in my fingers. (ISO 3) or f/stop + 1. How many stars do we want in the image? As many as I see with my eyes aperture at f/4 or f/5.6 or even f/7.1 Plenty (ISO 2) an aperture at f/4 to f/5.6 A sky full (ISO 4) aperture at f/2.8 How good is my camera at managing noise? Really Terrible: ISO 4 and exposure 2. Terrible (ISO 2) OK (no change) Good to Great (ISO 2) and increase exposure by double Suppose we end up computing a value of f/5.6, ISO 25 and exposure 2 minutes. What does that mean? It means something is far less than ideal and throwing in the towel is in order especially if the minimum ISO on the camera is 200. If on the other hand the series of multiplications and divisions nets an ISO greater 1600 it is better to dial the ISO down a bit. The above is pseudo scientific and adapted from observations and exposures both successes and failures. Actual results may vary. Ok, now I am sure an explanation is in order. Let me start with the one thing I think causes the most variability
3 of 7
12/8/2012 3:03 PM
http://blog.starcircleacademy.com/2010/10/exposing-for-stars/
the ambient temperature. The hotter it is, the stronger the noise. That is simply a fact of the electronic world. Film shooters have an advantage here. Film does not become noisier as it is exposed longer it does have a different problem though. The longer film is exposed, the less sensitive it becomes. Scientists and astronomers are well aware of the temperature problem. In fact, the really serious image makers super-cool their sensors to remove as much noise as possible. How much difference does temperature make? Well, a guy named Gary Honis built a miniature refrigerator to cool his camera. He is very happy if the mini-fridge gets the temperature of his camera down to 5 degrees! Why? Well one can take a look at his charts. But I can summarize: a 5 minute exposure at 77 degrees fahrenheit had more than 2,500 noisy pixels while at 5 degrees, less than 100 pixels displayed noise! Twenty five times LESS noise! When it is exceptionally cold outside I smile because I know that if my battery survives my image is going to be that much better! The next issue is the camera itself. The smaller and denser the sensor (the higher the megapixels) the more prone it is to noise. Sure some cameras have sophisticated processing to reduce the noise but most of the algorithms also reduce the contrast and thus the sharpness as well. A big sensor with big pixels is better for lower noise performance. Another issue has to do with the design of the sensor the method used to collect and read out the count of photons in each of its buckets (pixels). Some methods are just better than others. Look at the histogram. If the shots are even close to being over exposed reduce the exposure time. If things are too dark, and it is miserably cold out increase the ISO or open up the aperture or both. If it is warm only open the aperture because a higher ISO or longer exposures will result in more noise. To get a well lit foreground requires one of the following: Shooting when there is more moon (and get fewer stars) Painting the foreground with artificial light Shooting for a much longer time (and live with the noise). Shoot some shots at twilight to get a nice foreground and layer in the star trails.
4 of 7
12/8/2012 3:03 PM
http://blog.starcircleacademy.com/2010/10/exposing-for-stars/
11 Images stacked using "Brighten" (lighten) mode. One of the images has the Saguaro lit by a brake light of a nearby car.
11 images averaged. Notice the big difference in the contrast of the startrails and the muted light on the Saguaro. On the other hand the sky is "smooth" since averaging also averages out random noise.
If it is not possible to reduce noise by averaging, then what is LENR (Long Exposure Noise Reduction)? Many DSLRs can be configured to enable or disable LENR. Usually I leave it off because using LENR makes your shot take from 50% to 100% longer. Why? Well the camera is effectively doing what the photographer can do by putting a lens cap on. It is taking a dark frame. It closes the shutter and lets the pixel counts accumulate. It then uses those accumulated pixels to subtract them from the image it just captured. If you have amp glow (multi-pixel hot spots that appear pink or purple) the subtraction will remove the glow. If you have hot pixels areas that always read out as bright, the subtraction will eliminate those as well since they will also be in the dark frame. Since the performance of the sensor changes rather dramatically with increased or decreased heat taking the dark frame immediately after the exposure works best. Of course the camera imaging chips may also do things like sharpen or blur pixels that it thinks are out of range with surrounding pixels. Blurring may improve the appearance overall but it also has an effect very similar to the average stack we looked at earlier. It is much better to do what we can to keep the noise low in the first place. What about simply increasing the exposure with the exposure (or lightness) control? There is no magic in that
5 of 7
12/8/2012 3:03 PM
http://blog.starcircleacademy.com/2010/10/exposing-for-stars/
slider. If you do nothing to increase the exposure the pixel values are left alone. If, however you increase the exposure by 1 stop, the effect is to double every value. A 10 becomes a 20, a 50 becomes a 100. This, of course, makes those pixels brighter but it also makes every other pixel brighter, too, including the mild noise. A slightly noisy unnoticeable 3 value becomes a quite noticeable 24 when you increase the exposure by 3 f-stops an eight-fold increase. **NOTE: In the earlier Drizzle discussion the word droplet and photon appear to be used interchangeably. But photons are very tiny things and in reality Drizzles one droplet per second is really about 2,000 photons per second in case more scientific numbers are desired.
Share this:
Like 12 2 Tweet 0
About Steven Christenson I am an avid Night Photographer, an instructor at StarCircleAcademy.com and a co-founder of the extremely successful "Bay Area Night Photography" group. View all posts by Steven Christenson
This entry was posted in Image, Photo Tip, Stacking, Workshop and tagged ambient temperature, aperture, averaging, brighten mode, exposure, gaps in trails, ISO, noise, noise reduction, speed, stacking, Star Trails. Bookmark the permalink.
Kudos for this Steve! This has answered some important questions for me. Now I just need to practice!
Reply
Should also add Q: What if you DO NOT want trailing stars? A: Keep your exposure shorter than 300 / focal length (for crop cameras); 500/focal length for full frame. What? Ok, assume you have a crop camera and a 50 mm lens. You can shoot for about 300 / 50 = 6 seconds before noticeable trailing starts. On a full frame camera the same lens would allow almost 10 seconds of exposure.
6 of 7
12/8/2012 3:03 PM
http://blog.starcircleacademy.com/2010/10/exposing-for-stars/
Reply
I have debunked the 600 (500) rule. Its an aesthetic guideline and the value will depend on your camera/sensor/focal length.
Reply
Pingback: The Elusive Milky Way Capture an Image | Star Circle Academy
7 of 7
12/8/2012 3:03 PM