Professional Documents
Culture Documents
Holds wrenches, chisels, etc. Vibration-absorbing design, Attach to broom handles and mops for better grip. Eases awkward hand positioning. Description Tool Holder, 18" Tool Holder, spark resistant, 18"
Hand Tools
olds parts in proper alignment - even when H material is not of identical thickness. Positive lock leaves hands free. eep-throated U-shaped jaws provide D perfect visibility. 0 per carton 1 Part No. WC-9 (UPC No. 0 27719 00125 8)
ocks to work with powerful grip for smooth and L accurate bending and seaming. icro-adjusting screw and easy M release trigger. Locks to work with powerful grip. akes all kinds of bending, forming and crimping M jobs faster and easier. 0 per carton 1 Part No. LS-8 (UPC No. 0 27719 00139 5)
igh grade alloy steel for maximum durability H and performance. icro-adjustment for quick M pre-adjusting and repeat clamping. owerful locking mechanism prevents P slippage. Jaws open wide for versatility. Locks securely with hand squeeze. Easy-release trigger. 0 per carton 1 Part No. LC-6 (UPC No. 0 27719 00138 8) Part No. LC-11 (UPC No. 0 27719 00137 1)
Rugged, heavy duty drop forged steel frame. Non-slip clamping on all shapes. Extra throat depth. S teel spindles are copper plated for spatter protection. wivel pads adjust freely to S bear evenly on clamped part. Lacquered finish. ndividually boxed for easy I storage and protection. Part No. 412P Part No. 410P Part No. 408P
New design frame for maximum strength. teel spindles are copper plated for spatter protection. S wivel pads adjust freely to bear evenly on clamped part. S Lacquered finish. Part No. CC-6 Part No. CC-5
Throat Capacity Inches mm 0 - 2 0 - 3 0 - 4 0 - 5-1/4 0 - 5-7/8 0-50 0-75 0-100 0-130 0-147
mm 28 40 56 65 83
Ctn 10 10 10 10 10
514
www.oki-bering.com
V-Gard Protective Caps and Hats from MSA consist of a polyethylene shell and suspension system working together as a protective system. V-Gard headwear features advanced styling in either cap or hat styles, with the cap available in three sizes: small (6" - 7-1/8"), standard (6-1/2" - 8"), and large (7" - 8-1/2"). V-Gard Caps and Hats meet or exceed the applicable requirements for a Type 1 helmet (top impact) as outlined in ANSI Z89.1-2003, Class E, and also as outlined in CSA 294.1-2005 (Class E) with 1-Touch and Fas-Trac suspensions. V-Gard Caps and Hats are not specifically designed to protect against lateral blows from the front, side, or rear. MSAs Vanguard II Protective Helmets are so designed and must be used if lateral protection is desired. For more information, contact your MSA distributor.
Warning: Do not mix suspension and helmet sizes. Make sure the sizes match (example: standard-size suspension with standard-size helmet). Use only MSA suspensions on an MSA helmet. Failure to comply with the above will reduce the energy-absorbing ability of the protective helmet, which can result in serious injury or death.
w/Fas-Trac Suspension
w/Staz-On Suspension
w/Fas-Trac Suspension
w/1-Touch Suspension
w/Uni-Pro Suspension
w/Staz-On Suspension
w/Fas-Trac Suspension
w/Staz-On Suspension
w/Fas-Trac Suspension
w/1-Touch Suspension
White 466354 477477 463942 475358 Blue 466355 477478 463943 475359 Yellow 466356 477479 463944 475360 Orange 463945 475361 Red 463947 475363 Green 463946 475362 Gray(Navy) 463948 475364 Hi-Viz Orange 489368 488148 488146 Hi-Viz Lime Green 815558 815565 Hi-Viz Yellow-Green 10061512 Dark (Canadian) Blue 802972 Gold 475365 Robins Egg Blue 495853 Brown 495854 Silver 495855 Tan Black 492559 Light Buff 478237 495856 Purple 488398 495858 Pink 495862 Special V-Gard Assemblies White, w/L/B and 460018 C/H (Class C) White w/ American 474159 Flag Special V-Gard Assembly with Swing-Ratchet Suspension White Standard size V-Gard Cap, w/ Swing-Ratchet Suspension * CSA approved Minimum quantities may apply on non-stock items.
489364
475369 475368 475366 496075 475371 475370 475367 10021292 815770 10061515 802975
10004768
13
460069
815009
10004689
Replacement Suspensions
Small (6 - 7-1/8) Staz-On Fas-Trac 467386 492567 Standard (6-1/2 - 8) 454230 473332 Large (7 - 8-1/2) 492566 492568
V-Gard Accessories
Part No. 459458 Description Goggle Retainer for protective caps, less goggles
www.oki-bering.com
661
Protective Headwear
Vented Advance Caps provide cooling vents for improved air circulation and comfort. Advance Caps consist of a polyethylene shell and 4 or 6-point or Fas-Trac ratchet suspension that work together as a protective system. Advance Caps from MSA feature a combination of advanced features and styling: Improved air circulation. Optional 4 or 6-point Fas-Trac suspension system. Lightweight design for added comfort. Lateral contours above the ear for easy integration of hearing protection. Glaregard under brim to reduce reflective glare. Custom printing available. Sun Shield available- extends the brim all the way around. Meets or exceeds the applicable requirements for a Type I helmet (top impact) as outlined in ANSI Z89.1-2003 and CSA Z94.1-2005. Meets Class C.
warm air flows out Color White Blue Yellow Red Green Hi-Viz Orange 4-Point Fas-Trac Suspension 10034018 10034019 10034020 10034022 10034023 10034026 6-Point Fas-Trac Suspension 10034027 10034028 10034029 10034031 10034032 10034035 10035213
The NFL line of V-Gard Caps with the comfortable, strap adjustable Staz-On suspension offers superior quality, comfort, and protection. NFL V-Gard Caps meet or exceed all applicable requirements for ANSI Z89.1-2003 (Class E) for a Type I helmet. Safety directors will appreciate how NFL V-Gard Caps complement a safety program and improve wearer acceptance.
Part No. 818384 818385 818386 818387 818388 818389 818390 818391 818392 818393 818394 818395 818396 818397 818398
Description Arizona Cardinals Atlanta Falcons Baltimore Ravens Buffalo Bills Carolina Panthers Chicago Bears Cincinnati Bengals Cleveland Browns Dallas Cowboys Denver Broncos Detroit Lions Green Bay Packers Indianapolis Colts Jacksonville Jaguars Kansas City Chiefs
Part No. 818399 818400 818401 818402 818403 818404 818405 818406 818407 818408 818411 818409 818410 818412 818413 818414
Description Miami Dolphins Minnesota Vikings New England Patriots New Orleans Saints New York Giants New York Jets Oakland Raiders Philadelphia Eagles Pittsburgh Steelers San Diego Chargers Saint Louis Rams San Francisco 49ers Seattle Seahawks Tampa Bay Buccaneers Tennessee Titans Washington Redskins
13
662
www.oki-bering.com
Protective Headwear
Welding Kits
Part No. 488525 806211 Description Standard adapter for welding helmets and visors EC adapter kit (positive positioning type)
EC Adapter (left)
Description Instant-release and lugs for slotted caps (A, B, C, D, E, F, H) Lugs only, for instant-release slotted caps (H) Instant-release and lugs for non-slotted caps, with stop (A, B, C, D, E, F, G) Lugs only, for instant-release non-slotted caps (G) Instant-release, less lugs, with stop (A, B, C, D, E, F) Friction joints, pair (A, D, E, F)
13
Instant-release attachment
93631
Chin Straps
Wherever protective headwear must be worn, MSA chin straps can be worn to help keep the hats and caps in place during accelerated worker activity or windy conditions.
www.oki-bering.com
663
Respirators / Cartridges
HandyStrap N95 Organic Respirators with Locker
Separate compartment in locker permits storage of used masks during breaks, preventing premature disposal of the masks. Allows employer to meter respirator usage, reduces costs. Hygenic storage.
With Valve
Part No. 2800N95 2850 Description Medium/large Respirator locker with four 2800N95 masks Pkg. 10/bx 1
Durability at an affordable price. Dura-Mesh shell resists collapsing in regular use and even under hot and humid conditions. Molded nose bridge seals easily. Facepiece is naturally contoured without pressure points. Straps are securely attached so they dont break at the seal. Softspun lining for increased comfort and durability. NIOSH certified to have a filter efficiency of 95% or greater for non-oil based particulates.
Without Valve
Part No. 1200 Description Medium/large Pkg. 20/bx
Respiratory Equipment
Acid Gases
The Advantage line of particulate, chemical and combination cartridges is NIOSH-approved (to 42 CFR, Part 84) and provides lightweight, low-profile performance. Cartridges fit both the 200 LS Half-Mask and 3000 Full-Facepiece Advantage Respirators.
MSA Cartridge Description GMA GMA with N95 Prefilter GMA with R95 Prefilter GMA P100 GME GME with N95 Prefilter GME with R95 Prefilter GME P100 Low-Profile P100 R95 Snap-On Prefilter and Cover Re-Order Part Number 815355 815355 with 815394 or 816357 815355 with 815397 815362 815359 815359 with 815394 or 816357 815359 with 815397 815366 815369 815397 Box of 20 815401 Reusable Snap-On Cover. 2 in a Package.
e ide ide* rid r or r ide lf * e de Fluo apo ide iox Chl Su po in ehy n e & ** D d a n Va n iox m e y V Typ ncy ic rine r D rine oge oge oni Co yla mald rog cur e n i See Notes lor d ga hlo ulfu hlo ydr ydr mm ter fic er eth or next page H A S H C Fil Ef C Co Or Hy M F M ing
OV CL SD CD HC HS* AM MA FM HF MV P100 R95 N95 Flexi-Filter 2,3 2,3 2,3 2,3,4 2,3 2,3 2,3 2,3,4 1,4
with
15
Definitions
(95% filter efficiency level) Effective against particulate aerosols free of oil; time use restrictions may apply.
(95% filter efficiency level) Effective against all particulate aerosols; time use restrictions may apply.
An appropriate cartridge change-out schedule must be developed by a qualified professional, unless the cartridge/canister utilizes an end-of-service-life indicator. The change-out schedule must take into account all factors that may influence respiratory protection including specific work practices and other conditions unique to the workers environment. If using against substances having poor warning properties, there is no secondary means of knowing when to replace the cartridges/canister. In such cases, take appropriate additional precautions to prevent overexposure, which may include a more conservative change-out schedule or using an air-supplied respirator or SCBA. Failure to follow this warning can result in serious personal injury or death. As a reference, below is a partial list of substances having poor warning properties: Acrolein Hydrogen cyanide Nitric Acid Phosphorus trichloride Aniline Hydrogen selenide Nitro compounds Stibine Arsine Methanol Nitrogen oxcides Sulfur chloride Bromine Methyl bromide Nitroglycerin Urethane or other Carbon monoxide Methyl chloride Nitromethane diisocyanate-containing paints Diisocyanates Methylene chloride Phosgene Vinyl chloride Dimethyl sulfate Nickel carbonyl Phosphine
www.oki-bering.com
689
Respirators / Filters
Facepieces
2-Piece Neckstrap 815696 815692 815700 Single Neckstrap 815448 815444 815452 Size Small Medium Large
Extensive anthropometric research led to the Advantage Respirators unique design. MSAs engineers examined facial form data of over 8,000 people and, with CAD technology, developed the AnthroCurve Sealing Surface, which instantly conforms to each wearers unique facial characteristics.
Flexi-Filter
For Advantage Respirators The Flexi-Filter Pad is a great alternative to a standard cartridge-type particulate filter. Its swept-back design and low profile make it ideal for use under welding hoods or any tight spot where a respirator must be worn. Low breathing resistance and light weight keep the respirator comfortable and secure on your face. All Flexi-Filter pads are approved to the recent NIOSH 42 CFR Part 84 regulation. The filters are built around a plastic frame, which forms a plenum through which the air flows. The filtration media is a composite of multiple-layered materials, which vary, according to the class and efficiency that are required. Thin layers of carbon media are added if nuisance odor removal is required.
Part No. 818342 818343 818344 818345 818346 818347 818354 818355 10063227
Description P100 P100 OV/Ozone P100 AG/HF P100 HG/CL N95 N95 OV/Ozone P95 P95 OV/Ozone P95/HF (NIOSH)
Respiratory Equipment 15
For solids such as welding fumes and non-oil particulates. Fits easily under a welding hood. Replacement filters available (below). 42CFR 84 approved. Part No. 7190N99
Replacement filters for Part No. 7190N99 Part No. 719009N99- 2 pack
690
www.oki-bering.com
Fall Protection
Size Part No. 10072478 10072479 10072480 10072481 10072482 10072483 10072484 10072485 10072486 10072487 10072488 10072489 10072490 10072491 10072492 10072493
XSM STD XLG SXL
Leg Buckles
Qwik-Fit Tongue
Attachment Points
Back Hip
The Workman Harness provides comfortable protection, due to its lightweight components and durable webbing. This vest-style harness, with optional hip D-Rings for work positioning, fits a wide range of body types and sizes. Color-contrasting thigh and torso straps simplify donning. Economical. Chest Strap included. Abrasion-resistant, strong, durable webbing. Yellow polyester webbing for high visibility. Web retainer collars to keep excess webbing neat. Easy to don and adjust. Choice of Qwik-Fit or Tongue-Buckle leg straps for easy adjustments. Meets OSHA regulations, ANSI A10.32 & ANSI Z359.1 and is certified to CSA Z259.10-M90
Shoulder Pads
The Workman Construction Harness adds an integral backpad for added comfort during work positioning and a removable, tongue-buckle tool belt. Meets applicable OSHA regulations, ANSI A10.32 and ANSI Z359.1 requirements. Integral back pad with tool belt included. Both attachment points are included (back and hip).
Size Part No. 10072494 10072495 10072496 10072497 10077490 10077571 10077572 10077573
XSM STD XLG SXL
Qwik-Fit
Part No. 10072475 Part No. 10072472 10072473 10072474 10073708 10072475 10076124 Harness Connection LC LC LC LC LC LC Anchorage Connection LC (2) LC LC (2) LC (2) GL3100 GL3100
PointGuard Anchorage Connector straps provide a secure point of attachment for residential and concrete construction use. The PointGuard anchorage connector can be installed in seconds, and when its no longer needed, you can simply cut the protruding strap and throw it away. Economical. Available in 2 models: residential or concrete construction. Durable, 1-3/4" polyester webbing. 5,000 lb. minimum breaking strength. 400 lb. capacity (182 kg) Meets all applicable OSHA regulations and ANSI A10.32 and ANSI Z359.1 Part No. 10042792 Part No. 10042792- Residential Anchor Strap Part No. 10042794- PointGuard Concrete Anchorage Connector Strap
726
www.oki-bering.com
Gas Detectors
Solaris Multigas Detectors
The Solaris Multigas Detector is an affordable, durable, reliable, easy-to-use portable instrument for detecting the presence of O2, H2S, CO and combustible gas. Ergonmic design- for maximum comfort. Alarm system- World-class triple alarm system with 100+ decibel audible alarm, multiple high intensity LED visual alarm and strong vibrating alarm. Display features- Superior display features simultaneous gas concentration display, backlighting for easy reading and alphanumeric message bar for easy use. Lightweight- Under 8 oz, compact size that makes it easy to wear. Durable- Case with rubberized armor provides superior protection against liquid and dust ingress (IP 65 rated). Long-Life Battery- Rechargeable lithium ion battery provides 14+ hours of continuous run time and delivers best-in-class performance in extreme conditions. Galaxy Compatible- Compatibility for computer automated calibration and record-keeping. Sampling Pump Option- Optional powered sampling pump with extensive contaminant filtering system. Warranty- Outstanding 2-year, all-inclusive warranty.
Part No. Description Standard Kits (include datalogging option) 10048147 10048149 4-Gas Instrument 3-Gas (LEL, 02, CO)
10048214 2-Gas (LEL, 02) Deluxe Kits (includes Econo-cal calibration kit, datalogging & sampling pump) 10049297 10049298 10049300 4-Gas Instrument 3-Gas (LEL, 02,CO) 2-Gas (LEL, 02)
The Altair Single-Gas Detector features sensor options for carbon monoxide, hydrogen sulfide and oxygen and will operate for over two years maintenance free. The long lifespan, coupled with the units high performance, results in one of the most cost-effective single-gas detectors on the market. Advanced design offers superior dust and water ingress protection and high resistance to RFI. Rubberized housing and one-button operation provide the durability and ease of use users expect from MSA instruments. Triple-alarm system featuring two bright flashing LEDs, a piercing audible alarm, and a vibrating alarm. Standard event logging. Hard polycarbonate case, encapsulated in a thick rubberized shell. Extremely resistant to drops and impacts. Rated to IP67 protection levels for dust/water ingress. Two years or 18 hours of alarm (1080 minutes) warranty.
Safety / Miscellaneous 19
The Altair Single-Gas Detector measures and displays concentrations of CO, H2S or O2 (depending on version). This accurate, rugged and reliable detector can be used for gas monitoring or to alert the wearer of hazardous situations. The Altair Pro Single-Gas detectors use replaceable sensors and commercially available batteries, and feature a large display with backlight. The standard datalogging records the 50 most recent events, as well as recording the peak gas reading every 3 minutes. The data can be transferred to a computer via the MSA FiveStar Link through IR communication (Part No. 655505). One-button operation, bump check and calibration. Triple alarm system: 95dB audible, visual and vibrating alarms. Rated to IP67 protection levels for dust/water ingress.
Gas Carbon Monoxide (CO) Hydrogen Sulfide (H2S) Oxygen (O2) IR Communication for PC-Jet Eye
732
www.oki-bering.com