D810 Complete

I
PHONE: 516.328.3300 FAX: 516.326.8827 WWW.SDP-SI.COM
Handbook of INCH Drive Components D810

Part Number Index ........................................................................................................................... xiii
Reference Tables

Fractional and Decimal Inch and Metric Equivalents......................................................... R-0
U.S. to Metric Conversion Multipliers.................................................................................... R-1
Conversion of Small Inch to mm.............................................................................................. R-2
Conversion of Small mm to Inch.............................................................................................. R-3
Multipliers for SI Units.............................................................................................................. R-4
Miscellaneous Conversion Factors........................................................................................ R-5
Formulas of: Energy, Inertia, Torque, Power and Work...................................................... R-10
Inertia of Round Discs............................................................................................................... R-13
Inertia Conversion Table........................................................................................................... R-14
Composite of Inch and Metric Drill Sizes.............................................................................. R-15
Standards for Inch Size Fasteners.......................................................................................... R-17
Screw Head Dimensions.......................................................................................................... R-18
Metric Thread Specifications.................................................................................................. R-19
Designing a Miniature Belt Drive............................................................................................ R-20
Technical Section.............................................................................................................................. T-0
T
1
2
3
4
5
SECTIONS:
1 - Gears............................................................................................................................................ 1-1
2 - Belt and Chain Drives................................................................................................................ 2-0
3 - Shafting ....................................................................................................................................... 3-1
4 - Shaft Accessories ..................................................................................................................... 4-1
5 - Bearings ...................................................................................................................................... 5-0
6 - Couplings..................................................................................................................................... 6-0
7 - Universal Joints.......................................................................................................................... 7-0
8 - Vibration and Shock Mounts.................................................................................................... 8-1
9 - Linear Motion Systems.............................................................................................................. 9-1
10 - Hardware..................................................................................................................................... 10-1
11 - Gearheads and Speed Reducers............................................................................................. 11-1
12 - Right Angle Drives...................................................................................................................... 12-0
13 - Clutches and Brakes.................................................................................................................. 13-0
14 - Gearmotors.................................................................................................................................. 14-1
15 - Miscellaneous Components..................................................................................................... 15-0
16 - Foot Mounts................................................................................................................................ 16-0
Alphabetical Index............................................................................................................................. A-1
6
7
8
9
10
11
SDP: ISO 9001 Registered SI: ISO 9001 + AS9100 Registered
Stock Drive Products / Sterling Instrument

2101 Jericho Turnpike, Box 5416, New Hyde Park, NY 11042-5416
Phone: 516-328-3300 Fax: 516-326-8827
Web: http://www.sdp-si.com Support: sdp-sisupport@sdp-si.com
FOR ORDERS ONLY, FAX: 800-345-1144
12
13
NOTE: We reserve the right to make changes & corrections without notice. Every effort has been
made to provide accurate technical & product information. The company disclaims responsibility
for any error or omission regarding technical & product information published.

2012 Stock Drive Products, Sterling Instrument / Divisions of Designatronics, Inc.
All rights reserved herein and no portion of this catalog may be reproduced without
the prior consent in writing of the company.
i
14
15
16
I
SETTING
IDEAS INTO MOTION
The SDP/SI Engineering Department is highly regarded as among
R best in the industry. Renowned
the
for their expertise in various design,
production and application engineering
T disciplines, SDP/SI engineers
are regularly solicited for problemsolving assistance by customers and
peers alike. They also work closely
1 clients' product development
with
teams to achieve mutually beneficial
design and cost efficiencies.
A wealth of experience and knowledge accumulated by the SDP/SI

engineers through the years is con3
tained in a design handbook regularly
published by the company. Copies of this extremely popular reference source are widely disseminated to technical
4
schools
and engineering institutions throughout the world.
If engineering is the company's driving force,

manufacturing
is its life blood.
5
Over 65% of the SDP/SI ready-to-deliver components are

produced in-house. This unusually broad manufacturing
capability translates into tighter control over product quality
6
and production costs. It also facilitates just-in-time deliveries of customer orders while improving overall project management operations.
The manufacturing division represents more

than half of the company's total workforce.
8Obligated to comply with exacting standards and rigid quality requirements, SDP/SI manufacturing personnel hone their
exceptional skills through an effective educational process
of ongoing knowledge transfer, supplemented by on-the-job
9
training.
10
11
12
13
14
15
16
ii
To produce its diverse line of drive and automation components, SDP/SI maintains an impressive array of metal and
plastic fabricating equipment ranging from conventional
engine lathes to precision gear cutting machinery to highly
sophisticated 11-axis CNC milling machines. Most of the
manufacturing tooling and fixtures are produced in-house as
are the programs that control the CNC-equipped machinery.
Never known to rest on its laurels, SDP/SI continues to
probe the future for improved designs, new products...and
innovative ways for setting ideas into motion.
HOW TO USE THE HANDBOOK

R
If you know the PART NUMBER:
The part number includes a code-prefix. The PART NUMBER INDEX will direct you to the appropriate
catalog page.
If you know the NAME of the item:
T
1
Refer to the ALPHABETICAL INDEX located at the end of the catalog.
If you are looking for a particular PRODUCT TYPE:

Products are organized into sections of related items. There are sixteen sections in this catalog.
Many of the sections have selection guides at the beginning.
Would you like to obtain additional literature?
We have a large selection of inch- and metric-based components. You can call or fax your request to our
Sales Department or go to our Web site: www.sdp-si.com to request a quote, place an order, contact Sales
or even contact Engineering for technical support.
Are you looking for technical assistance or a custom designed component?

If you have technical questions regarding our products or cannot find a component in our catalog which
meets your particular specifications, please contact our Applications Engineers.
For part numbers starting with letter A, contact SDP Engineering,
TELEPHONE: 516-328-3300
FAX: 516-328-9029
WEB: http://www.sdp-si.com/web/html/direct.htm and scroll to
Technical Support and select Stock Drive Products Engineering.
5
6
7
For part numbers starting with letter S contact Sterling Engineering,

TELEPHONE: 516-328-3300
FAX: 516-358-9478
WEB: http://www.sdp-si.com/web/html/direct.htm and scroll to
Technical Support and select Sterling Instrument Engineering.
8
9
Are you inquiring about quantity discounts or placement of orders?

Telephone: 516-328-3300 Ask for the Sales Department.
Or you can fax your inquiry to: Fax: 516-326-8827.
To place an order: Fax: 800-345-1144
WEB: http://www.sdp-si.com/web/html/direct.htm and scroll to SDP/SI - Sales
10
11
12
13
14
15
iii
16
DOMESTIC SALES CONDITIONS

R
T
1
Ordering by phone: Telephone: (516) 328-3300
We can give you price and stock status on every catalog item over the phone.
For larger production quantities, we can fax you a written quote of price and delivery.
Please call us between 9 AM and 5 PM New York time or fax or e-mail us anytime. If you
prefer, you can contact one of our sales representatives listed on the following pages.
Ordering online: www.sdp-si.com
To get to the Online Shopping eStore, simply click BUY ONLINE.

A handling charge of $3.95 applies to all orders.
Ordering by fax: Toll-Free Fax: 1 (800) 345-1144 (for orders only)
Ordering by Mail:
4
5
6
7
8
9
Please use our toll-free fax number to order.

Specify part numbers, quantities, delivery dates needed and method of shipment.
Mail is sorted and orders are promptly processed by our Sales Department.
METHODS OF PAYMENT
Open Account Orders:
A minimum order is $50 plus shipping charges. Orders requiring any type of special handling or
certification are subject to additional charge. There is an additional charge of $10 for orders below
the minimum. A handling charge of $4.75 per delivery applies to all orders. Terms: Net 30 days,
F.O.B. New Hyde Park, NY.
Credit Card Orders:
For your convenience, we accept VISA , MasterCard , American Express and Discover . You
will be billed for merchandise and freight when parts are shipped, subject to credit card approval.
A handling charge of $4.75 per delivery applies to all orders. A minimum order is $50 plus shipping
charges. F.O.B. New Hyde Park, NY. Orders not meeting the minimum will be accepted, subject to a
$10 below minimum order charge.
Credit:
New accounts having a satisfactory rating will receive open credit terms; otherwise, initial
order may be on a C.O.D. basis pending credit approval. C.O.D. orders are subject to an additional
handling charge.
Method of Shipment:
U.P.S., FedEx, U.S.P.S., or as specified by customer.
10
11
12
13
14
15
16
Returns and Exchanges:
All returns and exchanges must have prior written approval. Returns must be made within 15 days
after receipt of material. Returned merchandise will be inspected and a charge made for restocking.
No credit will be allowed on custom-made, used or modified parts, or catalog parts purchased on a
quantity basis. Notification of any shortages must be reported within 10 days after receipt of goods.
Note:
Price and specifications are subject to change without notice. Every effort has been made to provide
accurate technical and product information. The company disclaims responsibility for any error or
omission in the accuracy of the technical and product information published.
SALES IN NORTHERN CALIFORNIA: Our Office and Distributor
CALIFORNIA (North)
Western Component Sales North, Inc.

16264 Church Street, #100
Morgan Hill, CA 95037
Tel: (800) 953-1222 Fax: (408) 776-1873
E-mail: sales@western-components.com
www.western-components.com
iv
DOMESTIC SALES REPRESENTATIVES

ALABAMA
Aurora-Tech Marketing
211 Six Forks Road, Suite 106
Raleigh, NC 27609
Tel: (919) 829-1970 Fax: (919) 829-1906
E-mail: dixiesales@auroragroup.net
www.auroragroup.net
DISTRICT OF COLUMBIA
Brandon Associates
237 Lacey Street
West Chester, PA 19382
Tel: (610) 738-8500 Fax: (610) 738-9554
E-mail: brandon@brandonsales.com
www.brandonsales.com
ARIZONA
Silver Mountain Design Ltd.
1600 E. Northern Ave., Suite 190
Phoenix, AZ 85020
Tel: (800) 344-5689 Fax: (602) 277-8939
E-mail: smdinfo@silvermountaindesign.com
www.silvermountaindesign.com
FLORIDA
Call SDP/SI at:
Tel: (516) 328-3300 Fax: (516) 336-8827
E-mail: sdp-sisupport@sdp-si.com
www.sdp-si.com
ARKANSAS
The Zonk Group, Inc.
1505 Precision Drive
Plano, TX 75074
Tel: (972) 509-7651 Fax: (972) 424-2219
E-mail: sales@zonkgroup.com
www.zonkgroup.com
CALIFORNIA (North)
16264 Church Street, #100
Tel: (800) 953-1222 Fax: (408) 776-1873
CALIFORNIA (South)
Motion Components
747 S. Brea Blvd., Suite 36
Brea, CA 92821
Tel: (714) 255-1080 Fax: (714) 255-1772
E-mail: sales@motioncomp.com
www.motioncomp.com
COLORADO
Moss Marketing
215 S. Wadsworth Blvd., Suite 220
Lakewood, CO 80226
Tel: (800) 980-8812 Fax: (303) 979-1141
E-mail: info@mossmktg.com
www.mossmktg.com
CONNECTICUT
Underwood Sales Corp.
25 Tunnel Road, Vernon, CT 06066
Tel: (860) 870-1359 Fax: (860) 870-1361
E-mail: sales@underwoodsales.com
www.underwoodsales.com
DELAWARE
Brandon Associates
237 Lacey Street
Tel: (610) 738-8500 Fax: (610) 738-9554
GEORGIA
Raleigh, NC 27609
Tel: (919) 829-1970 Fax: (919) 829-1906
www.auroragroup.net
3
4
IDAHO
Northmar, Inc.
1011 N.E. 69th, Seattle, WA 98115
Tel: (206) 524-5170 Fax: (206) 524-0402
E-mail: sales@northmar.com
www.northmar.com
5
6
ILLINOIS
K-W Associates, Inc.
1005 Alexander Court, Unit C
Cary, IL 60013-1891
Tel: (847) 639-6630 Fax: (847) 639-6631
INDIANA (North)
Electro Mech Components, Inc.
9318 Bluff Ct.
Zeeland, MI 49464
Tel: (616) 772-6423 Fax: (616) 748-1191
E-mail: edlindenmayer@chartermi.net
8
9
INDIANA (South)
Rockford Controls Ohio, Inc.
31025 Center Ridge Road, Suite 12
Westlake, OH 44145
Tel: (800) 572-0479 Fax: (440) 899-2820
E-mail: sales@rockfordcontrols.net
10
11
IOWA
Cary, IL 60013-1891
Tel: (847) 639-6630 Fax: (847) 639-6631
12
KANSAS
Midtec Associates Inc.
11900 W. 87th St. Pkwy., Suite 220
Lenexa, Kansas 66215
Tel: (800) 444-9860
Fax: (913) 541-1729
E-mail: midtec@midtec.com
www.midtec.com
13
14
15
v
16

R
T
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
KENTUCKY
Westlake, OH 44145
Tel: (800) 572-0479 Fax: (440) 899-2820
LOUISIANA
1505 Precision Drive, Plano, TX 75074
Tel: (972) 509-7651 Fax: (972) 424-2219
www.zonkgroup.com
MAINE
694 Chelmsford Street, Lowell, MA 01851
Tel: (978) 937-0600 Fax: (978) 454-0363
MARYLAND
Brandon Associates
237 Lacey Street
Tel: (610) 738-8500 Fax: (610) 738-9554
MASSACHUSETTS
Tel: (978) 937-0600 Fax: (978) 454-0363
MICHIGAN
Electro Mech Components, Inc.
9318 Bluff Ct., Zeeland, MI 49464
Tel: (616) 772-6423 Fax: (616) 748-1191
E-mail: edlindenmayer@chartermi.net
MINNESOTA
K-W Associates, Inc. MN
1005 Alexander Ct., Unit C
Cary, IL 60013
Tel: (847) 639-6630 Fax: (847) 639-6631
MISSISSIPPI
Raleigh, NC 27609
Tel: (919) 829-1970 Fax: (919) 829-1906
www.auroragroup.net
MISSOURI
Tel: (800) 444-9860
Fax: (913) 541-1729
www.midtec.com
vi
MONTANA (EAST)
Moss Marketing
Lakewood, CO 80226
Tel: (800) 980-8812 Fax: (303) 979-1141
www.mossmktg.com
MONTANA (WEST)
Northmar, Inc.
1011 N.E. 69th, Seattle, WA 98115
Tel: (206) 524-5170 Fax: (206) 524-0402
www.northmar.com
NEBRASKA
Tel: (800) 444-9860
Fax: (913) 541-1729
www.midtec.com
NEVADA (South)
Silver Mountain Design Ltd.
1600 E. Northern Ave., Suite 190
Phoenix, AZ 85020
Tel: (800) 344-5689 Fax: (602) 277-8939
E-mail: smdinfo@silvermountaindesign.com
www.silvermountaindesign.com
NEVADA (West)
16264 Church St., #100
Tel: (800) 953-1222 Fax: (408) 776-1873
NEW HAMPSHIRE
Tel: (978) 937-0600 Fax: (978) 454-0363
NEW JERSEY (North)
Pacent Engineering
470 Mamaroneck Avenue, Suite 402
White Plains, NY 10605
Tel: (914) 390-9150 Fax: (914) 390-9152
www.pacentengineering.com
NEW JERSEY (South)
Brandon Associates
237 Lacey Street
Tel: (610) 738-8500 Fax: (610) 738-9554

NEW MEXICO
Moss Marketing
Lakewood, CO 80226
Tel: (800) 980-8812 Fax: (303) 979-1141
www.mossmktg.com
PENNSYLVANIA (South)
Brandon Associates
237 Lacey Street
Tel: (610) 738-8500 Fax: (610) 738-9554
NEW YORK CITY (Metropolitan Area)

Pacent Engineering
470 Mamaroneck Avenue, Suite 402
White Plains, NY 10605
Tel: (914) 390-9150 Fax: (914) 390-9152
www.pacentengineering.com
RHODE ISLAND
Tel: (978) 937-0600 Fax: (978) 454-0363
NEW YORK STATE

(Excluding N.Y.C. Metropolitan Area)
KLM - Garner, Inc.
4779 Clinton Street, Clark Mills, NY 13321
Tel: (315) 853-6126 Fax: (315) 853-3011
E-mail: info@klm-garner.com
www.klm-garner.com
SOUTH CAROLINA
Raleigh, NC 27609
Tel: (919) 829-1970 Fax: (919) 829-1906
www.auroragroup.net
NORTH CAROLINA
Raleigh, NC 27609
Tel: (919) 829-1970 Fax: (919) 829-1906
www.auroragroup.net
SOUTH DAKOTA
K-W Associates. Inc. MN
Cary, IL 60013
Tel: (847) 639-6630 Fax: (847) 639-6631
NORTH DAKOTA
K-W Associates, Inc. MN
Cary, IL 60013
Tel: (847) 639-6630 Fax: (847) 639-6631
TENNESSEE
Raleigh, NC 27609
Tel: (919) 829-1970 Fax: (919) 829-1906
www.auroragroup.net
OHIO
Westlake, OH 44145
Tel: (800) 572-0479 Fax: (440) 899-2820
TEXAS
1505 Precision Drive, Plano, TX 75074
Tel: (972) 509-7651 Fax: (972) 424-2219
www.zonkgroup.com
OKLAHOMA
1505 Precision Dr., Plano, TX 75074
Tel: (972) 509-7651 Fax: (972) 424-2219
www.zonkgroup.com
UTAH
Wehas, Inc.
P.O. Box 998
Midway, UT 84049
Tel: (435) 671-1776
E-mail: wehas@utahbroadband.com
OREGON
Northmar, Inc.
1011 N.E. 69th, Seattle, WA 98115
Tel: (206) 524-5170 Fax: (206) 524-0402
www.northmar.com
VERMONT
Tel: (978) 937-0600 Fax: (978) 454-0363
PENNSYLVANIA (North)
Westlake, OH 44145
Tel: (800) 572-0479 Fax: (440) 899-2820
VIRGINIA
Brandon Associates
237 Lacey Street
Tel: (610) 738-8500 Fax: (610) 738-9554
2
3
4
5
6
7
8
9
10
11
12
13
14
15
vii
16

R
T
1
2
3
4
5
WASHINGTON
Northmar, Inc.
1011 N.E. 69th, Seattle, WA 98115
Tel: (206) 524-5170 Fax: (206) 524-0402
www.northmar.com
WEST VIRGINIA
Westlake, OH 44145
Tel: (800) 572-0479 Fax: (440) 899-2820
WISCONSIN
Cary, IL 60013-1891
Tel: (847) 639-6630 Fax: (847) 639-6631
WYOMING
Moss Marketing
Lakewood, CO 80226
Tel: (800) 980-8812 Fax: (303) 979-1141
www.mossmktg.com
6
7
8
9
10
11
12
13
14
15
16
viii
INTERNATIONAL SALES CONDITIONS

All international purchase orders for products should be directed to your nearest international
distributor shown on the next page or:
STOCK DRIVE PRODUCTS/STERLING INSTRUMENT

DIVISIONS OF DESIGNATRONICS, INC.
2101 Jericho Turnpike, Box 5416,
New Hyde Park, NY 11042-5416
TEL: 516-328-3300 FAX: 516-326-8827
T
1
Order online: www.sdp-si.com
Click BUY ONLINE to enter the Online Shopping eStore.

A handling charge of $3.95 applies to all orders.
Minimum order:
$75 with a $10 charge for our standard export handling; i.e., $85 minimum billing.
If the order exceeds $100, there is no export handling charge made.
A handling charge of $4.75 per delivery applies to all orders.
Large quantity order:
METHODS OF PAYMENT
Considerable discounts are made available for large quantity orders.

Please request a quote for price and delivery.
Open Account Orders:
If you have an open account, we will ship and bill you.

Terms: Net 30 days, F.O.B. New Hyde Park, NY.
Credit Card Orders:
For your convenience, we accept VISA , MasterCard , American Express and Discover . You will be
billed for merchandise and freight when parts are shipped, subject to credit card approval. A minimum
order is $85 plus shipping charges.
7
8
Credit:
Purchase orders accompanied by bank references will be shipped on open credit terms.
Otherwise, an irrevocable letter of credit or prepayment is requested.
Method of Shipment:
U.P.S., FedEx, Air Parcel Post, or as specified by customer.
Returns and Exchanges:
All returns and exchanges must have prior written approval. Returns must be made within 15 days
after receipt of material. Returned merchandise will be inspected and a charge made for restocking.
No credit will be allowed on custom-made, used or modified parts, or catalog parts purchased on a
quantity basis. Notification of any shortages must be reported within 10 days after receipt of goods.
Note:
Price and specifications are subject to change without notice. Every effort has been made to provide
accurate technical and product information. The company disclaims responsibility for any error or
omission in the accuracy of the technical and product information published.
10
11
12
13
14
15
ix
16
INTERNATIONAL DISTRIBUTORS & SALES REPRESENTATIVES

R
T
1
2
3
4
5
6
7
8
9
10
ALGERIA, LIBYA, MAURITANIA,

MOROCCO & TUNISIA
Maison de lIngenieur
Cooperative 5 Juillet 62, Lot No. 10
Cite Makam El-chahid
Setif 19000, Algeria
Phone: 213-36-84-50-72
Fax: 213-71-10-43-80
Contact: Mr. Tayeb Boudoukha
E-mail: boudoukhatayeb@yahoo.fr
AUSTRALIA
Small Parts and Bearings
P.O. Box 2161
Mansfield, Queensland 4122, Australia
Phone: 07-3245-7977
Fax: 07-3245-1017
E-mail: sales@smallparts.com.au
www.smallparts.com.au
BELGIUM
Caldic Techniek Belgium NV SA
Tollaan 73 Avenue du Peage
1932 Sint-Stevens Woluwe, Belgium
Phone: 02/720.49.81
Fax: 02/720.81.01
E-mail: info@caldic-techniek.nl
www.caldic-techniek.nl
CANADA
CT & M Marketing
4-5694 Highway #7 East
Suite 403, Markham
Ontario, L3P-1B4 Canada
Phone/Fax: (905) 471-4939
E-mail: sales_info@ctm.ca
www.ctm.ca
DENMARK
Jens S. Transmissioner A/S
Brogrenen 5
DK-2635 ISH0J, Denmark
Phone: +45-70-13-83-33
Fax: +45-43-73-19-11
E-mail: info@jens-s.dk
www.jens-s.dk
11
12
13
14
15
16
FRANCE
PrudHomme Transmissions
25 Chemin d Aubervilliers
BP 86, 93203 SAINT-DENIS-Cedex, France
Phone: 33/1.48.11.46.00
Fax: 33/1.48.34.49.49
E-mail: info@prudhomme-trans.com
www.prudhomme-trans.com
GREAT BRITAIN
Davall Stock Gears
Welham Green, Hatfield
Hertfordshire, England AL9 7JB
England
Phone: 44-1-707-283131
Fax: 44-1-707-283132
E-mail: dsg@davall.co.uk
www.davall.co.uk
HUNGARY
BDI Hungary Kft.
1046 Budapest, Foti u. 141.
37. epulet, Hungary
Phone: 36-1-231-1010
Fax: 36-1-231-1030
E-mail: info@bdi.hu
www.bdi.hu
ISRAEL
Aerniv Agencies Ltd.
Ha Barzel Street #3
Tel Aviv 69710, Israel
Phone: 972-3-644-2727
Fax: 972-3-644-2728
E-mail: aerniv@aerniv.co.il
INTERNATIONAL DISTRIBUTORS & SALES REPRESENTATIVES

NETHERLANDS
Caldic Techniek bv
P.O. Box 660
3000 AR Rotterdam
The Netherlands
Phone: +31-10-4156622
Fax: +31-10-4378810
E-mail: aandrijf@caldic-techniek.nl
www.caldic.com
NORWAY
Jens S. A-S
Nesvien 11
Haslum, Norway
Phone: +47-67-58-7900
Fax: +47-67-58-7909
SINGAPORE,
MALAYSIA,
THAILAND & CHINA
Plant & Mill Supplies PTE Ltd.
4 Loyang Street
Loyang Industrial Estate
Singapore 508839
Phone: 65-6542-4211
Fax: 65-6542-1318
E-mail: mechanical@pmsupplies.com
www.pmsupplies.com
SLOVAKIA
BDI spol. s.r.o.
96001 Zvolen, Smrekova 10., Slovakia
Phone: 421-455-321-552
Fax: 421-455-321-545
E-mail: sales@bdi.sk
SOUTH KOREA
EMS Inc.
203, C-dong, Woolim Lions vally, 371-28
Gasan-dong, Geumcheon-gu, Seoul, Korea
Phone: +82-2-2026-0950
Fax: +82-2-2642-6083
E-mail: ems_korea@hotmail.com
SWEDEN
OEM Motor AB
Dalagatan 4
573 42 Tranas, Sweden
Phone: 46-752-424400
Fax: 46-752-424449
4
5
6
SINGAPORE,
MALAYSIA,
THAILAND & CHINA (continued)
PMC Technology (Suzhou) Pte Ltd.
Building no. 37-38, The South-Area
Jin Qiao Development Zone, Mu Du
Su Zhou Jiang Su 215101
P.R. China
Phone: 86-0512-6656891
Fax: 86-0512-66517961
E-mail: suzhou_sales@pmsupplies.com
Contact: Mr. William Koh
E-mail: williamkoh@pmsupplies.com
7
8
9
10
11
12
13
14
15
xi
16
HOW TO USE THE INDEX

Method 1: If you know the part number

The Part Number Index, on page xiii, will direct you to the appropriate page. Match the part number as
closely as possible to one of the entries in the Part Number Index. The dots denote variable characters
on the page. Then, go to the page number indicated. Often, the series will continue on to the next page.
A 1..5-..........................1-215
A 1..5-N48.......................1-212
A 1..5-Y24...................1-219
Part A 1..5-Y48........................1-213
A 1..5-Z24........................1-220
Number
Example:
Series
There are two ways to access the information on parts you are looking for, as shown below:
Section - Page Number
4
5
Method 2: If you know the name of the item

The Alphabetical Index is at the end of this catalog. We have tried to make as many entries as possible
to make it easier for you to find the products you are looking for. Consequently, the same page may be
referenced under several headings.
BELLOWS COUPLINGS
Clamp Type Hub
Hi-Flex, Nickel Bellows.................................6-11
Precision
Long Series, Bronze Bellows..................6-19
Short Series, Bronze Bellows.................6-18
Stainless Steel Bellows................................6-22
Section - Page Number
10
11
12
13
14
15
16
Product
Name
Example:
xii
PART NUMBER INDEX

A 1..5-. . ..........................1-215
A 1..5-N48.......................1-212
A 1..5-Y24. . ....................1-219
A 1..5-Y48........................1-213
A 1..5-Z24........................1-220
A 1..5-Z32........................1-217
A 1..5-Z48........................1-214
A 1A16-. . .......................1-228
A 1B 1-N240. . ...............1-143
A 1B 1-N32. . .................1-121
A 1B 1-N48. . .................1-98
A 1B 1-Y240. . ................1-17
A 1B 1-Y320. . ................1-16
A 1B 1-Y480. . ................1-15
A 1B 1-Y640. . ................1-14
A 1B 2-N24. . .................1-133
A 1B 2-N32. . .................1-108
A 1B 2-N48. . .................1-87
A 1B 3-Y. . .......................1-207
A 1B 4-Y. . .......................1-204
A 1B 6-N24. . .................1-218
A 1B 6-N32. . .................1-215
A 1B 6-N48. . .................1-212
A 1B 6-Y24. . ..................1-219
A 1B 6-Y32. . ..................1-216
A 1B 6-Y48..................1-213
A 1B 6-Z24. . ..................1-220
A 1B 6-Z32. . ..................1-217
A 1B 6-Z48. . ..................1-214
A 1B 9-N24. . .................1-185
A 1B 9-N32. . .................1-185
A 1B 9-N48. . .................1-184
A 1B 9-N64. . .................1-183
A 1B 9-Y24. . ..................1-185
A 1B 9-Y32. . ..................1-185
A 1B 9-Y48. . ..................1-184
A 1B 9-Y64. . ..................1-183
A 1B10-N24. . ................1-193
A 1B10-N32. . ................1-193
A 1B10-N48. . ................1-193
A 1B11-N32. . ................1-122
A 1B12-N. . ....................1-197
A 1B14-. . . ...................15-6
A 1C 1-N240. ..................1-142
A 1C 1-N32. . ..................1-120
A 1C 1-Y32. . ..................1-119
A 1C 2-N24. . ..................1-132
A 1C 2-N32. . ..................1-109
A 1C 3-Y. . .......................1-207
A 1C 4-Y. . .......................1-204
A 1C 7-N20010L..............1-189
A 1C 7-N20025R.............1-189
A 1C 9-N24. . ..................1-185
A 1C 9-N32. . ..................1-185
A 1C 9-N48. . ..................1-184
A 1C 9-N64. . ..................1-183
A 1C 9-Y24. . ..................1-185
A 1C 9-Y32. . ..................1-185
A 1C 9-Y44. . ..................1-184
A 1C 9-Y48. . ..................1-184
A 1C 9-Y64. . ..................1-183
A 1C12-N. . .....................1-197
A 1C14-. . ......................15-6
A 1C29-N20. . .................1-187
A 1C29-N24. . .................1-187
A 1C29-N32. . .................1-186
A 1C29-N48. . .................1-186
A 1C29-Y20. . .................1-187
A 1C29-Y24. . .................1-187
A 1C29-Y32. . .................1-186
A 1C29-Y48. . .................1-186
A 1M 2-TA32. . ...............1-114
A 1M 2-TA48. . ...............1-90
A 1M 2-Y24. . .................1-138
A 1M 2-Y32. . .................1-115
A 1M 2-Y48. . .................1-91
A 1M 3-Y24. . .................1-206
A 1M 3-Y32. . .................1-206
A 1M 3-Y48. . .................1-206
A 1M 4-Y16. . .................1-205
A 1M 4-Y24. . .................1-205
A 1M 4-Y32. . .................1-205
A 1M 4-Y48. . .................1-205
A 1M 5-N. ......................1-221
A 1M 5-Y. . ......................1-223
A 1M 6-N24. . ................1-221
A 1M 6-N32. . ................1-221
A 1M 6-N48. . ................1-221
A 1M 6-Y24. . .................1-223
A 1M 6-Y32. . .................1-223
A 1M 6-Y48. . .................1-223
A 1M15-. . ......................1-232
A 1N 1-N240. . ...............1-139
A 1N 1-N320. .................1-126
A 1N 1-N480. . ...............1-103
A 1N 2-N160. . ...............1-147
A 1N 2-N240. . ...............1-139
A 1N 2-N32. . .................1-116
A 1N 2-N48. . .................1-92
A 1N 2-Y160. . ................1-147
A 1N 2-Y240. . ................1-139
A 1N12-N. . ....................1-197
A 1P 1-N32016................1-127
A 1P 2-Y48. . ..................1-88
A 1P 2-Y64. . ..................1-67
A 1S 1-N32. . ..................1-123
A 1S 1-N48. . ..................1-99
A 1S 1-Y48. . ..................1-100
A 1S 1-Y640. . ................1-73
A 1S11-N32. . .................1-123
A 1S11-N48. . .................1-99
A 1T 2-Y24. . ...................1-137
A 1T 2-Y32. . ...................1-113
A 1T 2-Y48. . ...................1-89
A 1T 6-N24. . ..................1-222
A 1T 6-N32. . ..................1-222
A 1T 6-N48. . ..................1-222
A 1T 6-Y24. . ...................1-224
A 1T 6-Y32. . ...................1-224
A 1T 6-Y48. . ...................1-224
A 1T15-. . ........................1-232
A 2B 7-H. . ....................12-10
A 2B 7-S. . ....................12-10
A 2B 8-HG................12-11
A 2B 8-SG.................12-11
A 2Z 1-2RR. ..................12-18
A 2Z 1-2SR. ..................12-18
A 2Z 1-3SR. ..................12-18
A 2Z 2-2RR. ..................12-19
A 2Z 2-2SR. ..................12-19
A 2Z 2-3SR. ..................12-19
A 2Z 3-2RR. ..................12-20
A 2Z 3-2SR. ..................12-20
A 2Z 4-. . .......................12-12
A 2Z11-. . ......................12-21
A 2Z11-P...................12-22
A 2Z17-E. . ....................12-13
A 2Z18-E. . ....................12-14
A 2Z19-E. . ....................12-15
A 2Z20-LC. . .................12-7
A 2Z20-RC. . .................12-7
A 2Z20-UC. . .................12-7
A 2Z21-LC. . .................12-8
A 2Z21-LM. . ................12-9
A 2Z21-RC. . .................12-8
A 2Z21-RM. . ................12-9
A 2Z21-UC. . .................12-8
A 2Z21-UM. . ...............12-9
A 2Z22-2RR. . ...............12-16
A 2Z22-2SR. . ...............12-16
A 2Z22-3DR. . ...............12-16
A 2Z23-2RR. . ...............12-17
A 2Z23-2SR. . ...............12-17
A 2Z23-3DR. . ...............12-17
A 3C53-P1. . .................15-45
A 3C55-. . ......................15-44
A 3X50-SH. . ................15-36
A 3X50-SK. . .................15-37
A 3X50-SL. . .................15-38
A 3X51-. . ......................15-39
A 3Y 1-. . .......................15-18
A 3Y 3-.M08..................15-20
A 3Y 3-.Z. ......................15-19
A 3Z16-. . ......................14-23
A 3Z52-ML. . ................15-46
xiii
R
T
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
PART NUMBER INDEX

R
T
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
A 3Z52-ML24. ..............15-47
A 3Z53-ML. . ................15-43
A 3Z53-ML15. ..............15-48
A 3Z53-ML4575. ..........15-42
A 3Z55-. . ......................15-40
A 3Z55-CBLATT............15-41
A 3Z55-MR. . ................15-44
A 3Z55-PRB..............15-44
A 4T15-. . ......................10-21
A 4T15-INSPMR..........15-52
A 4T15-PLAHAM.........15-52
A 4T15-STSCAL...........15-52
A 4T15-TWEZRST........15-52
A 4Z15-SCDRST...........15-52
A 5A15-33. . ...................6-68
A 5A27-. . .......................6-70
A 5B15-00. . ...................6-69
A 5C .-. . ..........................6-75
A 5C 5-. . .........................6-75
A 5C 6-. . .........................6-75
A 5C 9-. . .........................6-79
A 5D 1-. . ........................6-56
A 5D 3-. . ........................6-57
A 5D 8-D. . ......................7-8
A 5D28-. . .......................6-54
A 5M 2-0. . .....................6-58
A 5M 8-D. . .....................7-12
A 5M 8-DD. . ..................7-12
A 5M 8-SE. . ...................7-15
A 5P15-00. . ....................6-69
A 5P15-33. . ....................6-68
A 5Q 8-D. . ......................7-7
A 5Q 8-DD. . ...................7-9
A 5Q 8-DM. . ..................7-8
A 5R 1-. . .........................6-56
A 5R 3-. ...........................6-57
A 5R2.-. . .........................6-71
A 5R21-..S.......................6-71
A 5R27-. . ........................6-70
A 5R28-. ..........................6-54
A 5R29-. ..........................6-55
A 5T 2-. . .........................6-58
A 5T 8-D. . ......................7-13
A 5T 8-DD. . ...................7-14
A 5T 8-SE. . ....................7-16
A 5T2.-. . .........................6-71
A 5X 8-SE. . ....................7-9
A 5Y 8-DM. . ..................7-6
A 5Y 8-DU. . ...................7-6
A 5Z 1-. . .........................6-56
A 5Z 3-. . .........................6-57
A 5Z 7-. . .........................6-72
A 5Z 7-1. . .......................6-72
A 5Z 8-D. . ......................7-13
A 5Z 8-DD. . ...................7-14
xiv
A 5Z 8-SE. . ....................7-16
A 5Z 8-SEB. . .................7-18
A 5Z15-00. . ....................6-69
A 5Z15-33. . ....................6-68
A 5Z2.-. . .........................6-71
A 5Z206-0606..................6-74
A 5Z27-. . ........................6-70
A 5Z28-. . ........................6-54
A 5Z29-. . ........................6-55
A 6A 2-..FA......................2-61
A 6A 2-..FS......................2-61
A 6A 2-..XL. ....................2-62
A 6A 3-..DF. . ..................2-65
A 6A 3-..DFB. .................2-71
A 6A 3-..H. . ....................2-68
A 6A 3-..NF. . ..................2-69
A 6A 3-..NFB. .................2-71
A 6A 4-..DF. . ..................2-105
A 6A 4-..FA......................2-103
A 6A 4-..L. ......................2-104
A 6A 5-FA...................2-23
A 6A 5-LT....................2-40
A 6A 6-..DF018. ..............2-42
A 6A 6-..DF031. ..............2-44
A 6A 6-..NF018. .............2-46
A 6A 6-..NF031. .............2-47
A 6A15-MXL. .............2-24
A 6A16-DF25. ............2-29
A 6A16-DF37. ............2-30
A 6A16-NF25. ............2-29
A 6A16-NF37. ............2-30
A 6A22MFA................2-116
A 6A22MTM. .............2-117
A 6A23-DF06. ............2-122
A 6A23-DF09. ............2-124
A 6A23-NF06. ............2-123
A 6A23-NF09. ............2-125
A 6A24MFA................2-138
A 6A24MTM. .............2-139
A 6A25-DF09. ............2-143
A 6A25-DF15. ............2-145
A 6A25-NF09. ............2-144
A 6A25-NF15. ............2-146
A 6A50MFA................2-164
A 6A50MGT. ..............2-165
A 6A51-DF03. ............2-168
A 6A51-DF06. ............2-169
A 6A51-DF09. ............2-170
A 6A51-NF06. ............2-169
A 6A51-NF09. ............2-170
A 6A52MFA................2-180
A 6A52MGT. ..............2-181
A 6A53-DF06. ............2-183
A 6A53-DF09..............2-186
A 6A53-NF06..............2-183
A 6A53-NF09. ............2-186
A 6A54MFA................2-195
A 6A54MGT. ..............2-196
A 6A55-DF09. ............2-200
A 6A55-DF15. ............2-202
A 6A55-NF09. ............2-201
A 6A55-NF15. ............2-203
A 6A61-..NF018. ............2-46
A 6A61-..NF031. ............2-47
A 6B 3. . ..........................2-58
A 6B 3-D. . ......................2-60
A 6B 3MD. . ...................2-60
A 6B 6. . ..........................2-37
A 6B 8-14........................2-244
A 6B 8-17........................2-243
A 6B 8-18........................2-239
A 6B 8-19........................2-235
A 6B 8-25........................2-247
A 6B 8-37........................2-247
A 6B 9-. . ........................2-254
A 6B 9-S. . ......................2-252
A 6B16. . .........................2-20
A 6B16-D. . .....................2-22
A 6B16MD. . ..................2-22
A 6C 2-..XL. ....................2-63
A 6C 3-..DF. . ..................2-72
A 6C 3-..H. . ....................2-74
A 6C 4-..FS......................2-103
A 6C 4-..L. .......................2-104
A 6C 7-25. . .....................2-227
A 6C 7-25B. ....................2-226
A 6C 8-14.........................2-244
A 6C 8-17.........................2-243
A 6C 8-18.........................2-239
A 6C 8-19.........................2-235
A 6C 8-21.........................2-233
A 6C 8-25.........................2-247
A 6C 9-. . .........................2-260
A 6C 9-AA39...................2-253
A 6C 9-T. . .......................2-252
A 6C22MFS................2-116
A 6C22MTM. .............2-119
A 6C24MFS................2-138
A 6C24MTM. .............2-141
A 6C54MFS................2-195
A 6C54MGT. ..............2-198
A 6C88-14........................2-244
A 6C88-17........................2-243
A 6C88-18........................2-239
A 6C88-19........................2-235
A 6C88-21........................2-233
A 6C88-25........................2-247
A 6D16-DF. . ...............2-27
A 6D16-NF. . ..............2-27
A 6D23-DF. . ...............2-121
PART NUMBER INDEX

A 6D51-DF. . ...............2-167
A 6D51-NF. . ..............2-167
A 6D53-DF. . ...............2-185
A 6D53-NF. . ..............2-185
A 6E 4-..DF. . ...................2-109
A 6E 4-..SF. . ...................2-110
A 6E25-..DF. . ..................2-155
A 6E25-..SF. . ..................2-156
A 6E28-DF. . ...............2-158
A 6E28-SF. . ...............2-159
A 6F 4-..DF. . ...................2-106
A 6G 3. . ..........................2-58
A 6G 6. . ..........................2-37
A 6G16. . .........................2-20
A 6H 3-..DF. . ..................2-76
A 6H 3-..NF. . ..................2-77
A 6H 3-..SF. . ..................2-77
A 6H25-DF. . ...............2-147
A 6H25-SF. . ...............2-147
A 6J 3-..DF. . ...................2-78
A 6J 3-..NF. . ..................2-79
A 6J 3-..SF. . ...................2-79
A 6J 9-AS. . ....................2-250
A 6J 9-B103....................2-253
A 6J25-DF. . ...............2-148
A 6J25-SF. . ...............2-148
A 6K 3-..DF. . ..................2-87
A 6K 3-..NF. . ..................2-88
A 6K 3-..SF. . ...................2-88
A 6L 3-..DF. . ...................2-89
A 6L 3-..NF. . ...................2-91
A 6L 3-..SF. . ...................2-90
A 6L23-DF. . ...............2-130
A 6L23-NF. . ...............2-131
A 6L23-SF. . ................2-131
A 6L25-DF. . ...............2-153
A 6L25-SF. . ................2-154
A 6L51-DF. . ...............2-172
A 6L51-SF. . ................2-173
A 6L53-DF. . ...............2-190
A 6L53-SF. . ................2-191
A 6M 7-12-. . .................2-218
A 6M 3-..DF. . .................2-92
A 6M 3-..SF. . .................2-93
A 6M 3M. . .....................2-9
A 6M 6-..DF. . .................2-52
A 6M 6-..SF. . .................2-53
A 6M 7-. .........................2-224
A 6M 7-..ACE..................2-224
A 6M 7-..PLP..................2-224
A 6M 7-..PLV...................2-224
A 6M 7-14. . ...................2-222
A 6M 7-25. .....................2-230
A 6M 7-37. .....................2-232
A 6M 7-50. .....................2-232
A 6M 7-MT.....................2-222
A 6M 7-Z50. ...................2-232
A 6M 8-14. . ...................2-246
A 6M 8-18. . ...................2-242
A 6M 8-19. . ...................2-238
A 6M 8-21. . ...................2-234
A 6M 9-. . .......................2-261
A 6M16-DF25.............2-34
A 6M16-SF25.............2-34
A 6M16M. . ....................2-9
A 6M51M. . ....................2-9
A 6M53M. . ....................2-9
A 6M55M. . ....................2-9
A 6M61-..DF. . ................2-52
A 6M61-..SF. . ................2-53
A 6N16-DF. . ..............2-28
A 6O 9-. ..........................2-256
A 6P 9-. . .........................2-251
A 6Q 7-25........................2-223
A 6Q 7-250SCLS.............2-223
A 6Q 7-25RL....................2-223
A 6Q 7-25SCCL...............2-223
A 6Q 7-H25......................2-223
A 6Q 7-H250SCLS..........2-223
A 6Q 7-H25RL.................2-223
A 6Q 7-H25SCCL............2-223
A 6R 1-A. ........................2-259
A 6R 1-C. ........................2-259
A 6R 3. . ..........................2-56
A 6R 3-C. . ......................2-6
A 6R 3-D. . ......................2-59
A 6R 3MD. . ....................2-59
A 6R 4. . ..........................2-100
A 6R 4-C. . ......................2-6
A 6R 4-D. . ......................2-102
A 6R 4MD. . ....................2-102
A 6R 6. . ..........................2-35
A 6R11-. . ........................2-257
A 6R11-040. . ................15-35
A 6R12-2L. . ....................2-268
A 6R19-. . ........................2-266
A 6R23M. . .....................2-112
A 6R23MC. . ...................2-7
A 6R23MD. . ...................2-114
A 6R25M. . .....................2-134
A 6R25MC. . ...................2-7
A 6R25MD. . ...................2-136
A 6R51M. . .....................2-162
A 6R51MC. . ...................2-8
A 6R53M. . .....................2-176
A 6R53MC. . ...................2-8
A 6R53MD. . ...................2-178
A 6R55M. . .....................2-193
A 6R55MC. . ...................2-8
A 6R55MD. . ...................2-194
A 6T 3-..DF. . ...................2-94
A 6T 3-..NF. . ..................2-96
A 6T 3-..SF. . ...................2-95
A 6T 3-C. . ......................2-6
A 6T 3-H..DF. . ................2-97
A 6T 3-H..SF. . ................2-97
A 6T 4-C. . ......................2-6
A 6T 4-H..DF. . ................2-111
A 6T 4-H..SF. . ................2-111
A 6T 7-25. .......................2-229
A 6T 9-. . .........................2-261
A 6T10-012. . ..................2-269
A 6T10-122. . ..................2-264
A 6T10-123. . ..................2-265
A 6T10-124. . ..................2-265
A 6T16-DF. . ...............2-31
A 6T16-SF. . ...............2-31
A 6T19-. . ........................2-267
A 6T23-H..DF. . ...............2-133
A 6T23-H..SF. . ...............2-133
A 6T25-H..DF. . ...............2-157
A 6T25-H..SF. . ...............2-157
A 6T35MC. . ...................2-7
A 6T39MC. . ...................2-7
A 6X 7-14. . .....................2-221
A 6X 7-25. . .....................2-225
A 6X 9-. . .........................2-254
A 6Y 7-25.........................2-223
A 6Y 7-250SCLS.............2-223
A 6Y 7-25RL....................2-223
A 6Y 7-25SCCL...............2-223
A 6Y 7-H25......................2-223
A 6Y 7-H250SCLS...........2-223
A 6Y 7-H25RL..................2-223
A 6Y 7-H25SCCL.............2-223
A 6Y 7-M. . .....................2-220
A 6Y 8-14.........................2-244
A 6Y 8-17.........................2-243
A 6Y 8-18.........................2-239
A 6Y 8-19.........................2-235
A 6Y 8-21.........................2-233
A 6Y 8-25.........................2-247
A 6Y 8-37.........................2-247
A 6Y77-37........................2-231
A 6Y77-37SCCL..............2-231
A 6Z 3-..DF. . ...................2-80
A 6Z 3-..NF. . ..................2-86
A 6Z 3-..SF. . ...................2-83
A 6Z 4-..DF050. ..............2-107
A 6Z 4-..DF075. ..............2-108
A 6Z 4-..SF050. ..............2-107
A 6Z 4-..SF075. ..............2-108
A 6Z 6-..DF. . ...................2-48
A 6Z 6-..SF. . ...................2-50
A 6Z 8-14. . .....................2-245
xv
R
T
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
PART NUMBER INDEX

R
T
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
A 6Z 8-18. . .....................2-241
A 6Z 8-19. . .....................2-237
A 6Z 8-21. . .....................2-233
A 6Z 9-. . .........................2-260
A 6Z 9-HN. .................2-271
A 6Z 9-016N. . ................2-271
A 6Z 9-016NID................2-271
A 6Z10-012. . ..................2-269
A 6Z10-134. . ................15-35
A 6Z16. . .........................2-15
A 6Z16-DF. . ...............2-32
A 6Z16-SF. . ...............2-32
A 6Z16-C. . .....................2-6
A 6Z23-DF. . ...............2-126
A 6Z23-NF. . ...............2-129
A 6Z23-SF. . ...............2-128
A 6Z25-DF. . ...............2-149
A 6Z25-SF. . ...............2-151
A 6Z51-DF. . ...............2-171
A 6Z53-DF. . ...............2-187
A 6Z53-NF. . ...............2-189
A 6Z53-SF. . ...............2-189
A 6Z61-..DF. . ..................2-49
A 6Z61-..SF. . ..................2-51
A 715-. . ......................9-6
A 715-0. . ....................9-5
A 7A30-. . .......................4-24
A 7A87-. . .......................9-13
A 7B 4-BF. . ....................5-33
A 7B 4-BP. . ....................5-33
A 7B 4-F. . .......................5-37
A 7B 4-GF. . ....................5-34
A 7B 4-GP. . ....................5-34
A 7B 4-L. . ......................5-33
A 7B 4-P. . .......................5-35
A 7B 4-SCB. . .................5-48
A 7B 4-SF. . ....................5-44
A 7B 4-SP. . ....................5-38
A 7B 4-SSB. . .................5-47
A 7B 7-. . ......................10-52
A 7B 7-S. . ....................10-53
A 7B 8-B. . ....................10-47
A 7B21-. . .......................4-31
A 7B22-. . .......................4-31
A 7B30-. . .......................4-25
A 7C 2-1. . .......................4-18
A 7C 8-D. . ....................10-48
A 7C 8-E. . ....................10-49
A 7C 8-F. . .....................10-50
A 7C 8-G. . ....................10-50
A 7C12-. . ........................6-82
A 7C13-. . ........................6-83
A 7C14-. . ........................6-86
A 7C15-. . ........................9-5
A 7C16-. . ........................9-9
xvi
A 7C18-. ..........................4-32
A 7C19-P. . ......................4-33
A 7C19-T. . ......................4-33
A 7C20-. ..........................4-32
A 7C21-. . ........................4-31
A 7C22-. . ........................4-31
A 7M 5-UR. . ................15-34
A 7P 6-F. . .......................5-50
A 7P 6-P. . .......................5-50
A 7P86-. . ........................9-12
A 7Q 9-. . ......................10-57
A 7Q 9-1W. . .................10-58
A 7Q15-. . .......................9-5
A 7Q16-. . .......................9-8
A 7Q17-. . .......................9-10
A 7T 5-UR. . ..................15-33
A 7W15-. . ......................9-7
A 7X 1-. . .........................3-7
A 7X 1-P0. . ....................1-14
A 7X 1-P1. . ....................1-16
A 7X 2-1. . .......................4-18
A 7X 3-. . .........................4-21
A 7X 8-A. . ....................10-47
A 7X 8-C. . ....................10-45
A 7X 9-. . .......................10-57
A 7X 9-1W. . .................10-58
A 7X 9-3W. . .................10-59
A 7X16-. . ........................9-9
A 7X17-. . ........................9-11
A 7X21-. . ........................4-31
A 7X22-. . ........................4-31
A 7X34-. . ........................4-12
A 7Y 5-CF. .....................10-11
A 7Y 5-CF. . ...................15-21
A 7Y 5-I. . ......................15-30
A 7Y15-. . ........................9-7
A 7Y16-. . ........................9-8
A 7Y55-E. . ......................5-11
A 7Y55-F. . ......................5-10
A 7Y55-G. . .....................5-12
A 7Y55-P. . ......................5-9
A 7Z 4-. . .........................5-106
A 7Z 4-F. . .......................5-106
A 7Z 4-P......................5-106
A 7Z 5-.R. . .....................5-32
A 7Z 5-. . .........................5-13
A 7Z 5-IR. . ...................15-29
A 7Z 5-RR. . ..................15-32
A 7Z 5-SR. . ..................15-32
A 7Z 5-UR. . ..................15-29
A 7Z 6-FE....................5-107
A 7Z 7-. . .........................5-93
A 7Z 7-ST....................5-92
A 7Z 8-URBB. . ............15-26
A 7Z10-. . ........................6-85
A 7Z11-. . ........................6-84
A 7Z16. . .........................9-8
A 7Z25-PB. . ...................5-104
A 7Z25-PBF................5-104
A 7Z26-FB. . ...................5-105
A 7Z26-FBF.................5-105
A 7Z27-F050. . ................5-113
A 7Z28-F050. . ................5-114
A 7Z29-XS. . ...................5-99
A 7Z31-PBB...............5-100
A 7Z32-PBP................5-101
A 7Z33-PBN...............5-102
A 7Z34-. . ........................4-13
A 7Z36-. . ........................4-7
A 7Z37-. . ........................4-5
A 7Z37-030553................2-97
A 7Z37-030553................2-133
A 7Z37-030578................2-111
A 7Z37-030578................2-157
A 7Z37-040670................2-111
A 7Z37-040670................2-157
A 7Z38-. . ........................4-8
A 7Z39-. . ........................4-6
A 7Z40-F.B. . ...................5-67
A 7Z41-PSB. . ................5-74
A 7Z42-BFMB............5-76
A 7Z43-F.DAF.............5-72
A 7Z44-PSDAF...........5-75
A 7Z45-BMFAF..........5-79
A 7Z46-FSN. . ................5-82
A 7Z47-PSN. . ................5-84
A 7Z48-FSN. . ................5-82
A 7Z49-FSCCW..........5-88
A 7Z49-FSCCW........13-19
A 7Z56-BFM. . ...............5-85
A 7Z57-BFM. . ...............5-86
A 7Z60-FSDU. . ..............5-68
A 7Z61-FSDU. . ..............5-70
A 7Z62-FDU. . ................5-77
A 7Z63-FDU. . ................5-78
A 7ZB5-IRG. . ...............15-28
A 7ZB5-URG. . .............15-27
A 9A42-D.......................10-102
A 9A43-A. . ...................10-96
A 9A43-E. . ...................10-96
A 9A43-F1. . .................10-94
A 9A44-A. . ...................10-43
A 9A45-A. .....................10-42
A 9A60-. . .....................10-16
A 9B40-. . .......................4-30
A 9B41-. . .....................10-39
A 9B41-BL................10-39
A 9B41-A. . ...................10-37
A 9B41-ABL.............10-37
A 9B42-A. . ...................10-102
PART NUMBER INDEX

A 9B42-B. . .....................4-18
A 9B42-C. . .....................4-18
A 9B42-D. . ...................10-102
A 9B43-A. . ...................10-95
A 9B43-B. . ...................10-98
A 9B43-C. . ...................10-100
A 9B43-D. . ...................10-97
A 9B43-E. . ...................10-96
A 9B43-F1. . .................10-94
A 9B44-A. . ...................10-43
A 9B45-A. .....................10-42
A 9B47-A15BL..............10-42
A 9B47-A15N. ..............10-42
A 9B60-. . .....................10-16
A 9C33-. . ......................10-81
A 9C35-. . ......................10-74
A 9C37-. . ......................10-78
A 9C38-. . ......................10-80
A 9C39-. . ........................4-29
A 9C40-. . ........................4-30
A 9C60-. . ......................10-16
A 9L80-0316..................15-55
A 9L80-0616..................15-54
A 9L80-0714..................15-54
A 9L80-0816..................15-53
A 9L80-0914..................15-53
A 9L80-1116..................15-54
A 9L80-1216..................15-55
A 9M41-.8398. . ...........10-35
A 9M41-KIT. . ...............10-36
A 9M50-B. . ..................10-15
A 9M50-D. . ..................10-15
A 9M50-F. . ...................10-15
A 9M50-H. . ..................10-15
A 9M50-P. . ...................10-15
A 9M50-R. . ..................10-15
A 9M52-. . ....................10-22
A 9M58-. . ....................10-31
A 9M60-. . ....................10-17
A 9M61-. . ....................10-17
A 9M62-. . ....................10-26
A 9M64-. . ....................10-27
A 9M64-T..................10-27
A 9M65-. . ....................10-27
A 9M66-. . ....................10-54
A 9M68-. . ....................10-56
A 9M69-. . ....................10-56
A 9M70-. . ....................10-44
A 9P43-F1. . ..................10-94
A 9P54-. . ......................10-23
A 9P55-. . ......................10-24
A 9P57-. . ......................10-38
A 9P67-. . ......................10-54
A 9P68-. . ......................10-55
A 9P71-. . ........................5-115
A 9P74-. . ......................10-55
A 9Q12-. . .....................16-56
A 9Q13-. . .....................16-58
A 9Q14-. . .....................16-57
A 9Q17-. . .....................10-29
A 9Q19-. .......................10-60
A 9Q26-. . .....................10-19
A 9Q26-KIT001.............10-21
A 9Q26-M. . ..................10-20
A 9Q27-. . .....................10-65
A 9Q28-. . .....................10-67
A 9Q29-. . .....................10-69
A 9Q29-04.....................10-69
A 9Q32-. . .....................10-72
A 9Q34-. .......................10-82
A 9Q34-X. .....................10-82
A 9Q36-. . .....................10-76
A 9Q71-. . .......................5-115
A 9T41-.839910. ...........10-33
A 9T41-.839911. ...........10-33
A 9T41-.839912. ...........10-33
A 9T41-.839913. ...........10-33
A 9T41-.839915. ...........10-33
A 9T41-.839916. ...........10-33
A 9T41-.839917. ...........10-34
A 9T41-.839918. ...........10-34
A 9T41-.839919. ...........10-34
A 9T41-.839920. ...........10-34
A 9X12-. . ......................16-56
A 9X13-. . ......................16-58
A 9X14-. . ......................16-57
A 9X15-. . ......................10-10
A 9X16-F. . ....................10-13
A 9X16-P. . ....................10-13
A 9X16-R. . ...................10-13
A 9X17-. . ......................10-28
A 9X19-. ........................10-60
A 9X20-. . ......................10-52
A 9X21-E. .....................10-61
A 9X21-I. ......................10-61
A 9X23-. . ......................10-25
A 9X25-. . ......................10-8
A 9X26-. . ......................10-18
A 9X31-. . ......................10-70
A 9X40-. . ........................4-30
A 9X43-A. . ...................10-95
A 9X43-E. . ...................10-96
A 9X43-F1. . ..................10-94
A 9X49-. . ........................4-29
A 9X60-. . ......................10-16
A 9X93-SL. . .................10-31
A 9X93-SO. . ................10-31
A 9Y28-. . ......................10-67
A 9Y31-. . ......................10-71
A 9Y35-. . ......................10-73
A 9Y44-A. . ...................10-43
A 9Y71-. . ........................5-115
A 9Z50-F. . ....................10-14
A 9Z50-P. . ....................10-14
A 9Z50-R. . ...................10-14
A 9Z50-W. . ..................10-14
A 9Z80-LUBKIT............15-52
A10C16-HS. . .................8-59
A10C16-LS. . ..................8-59
A10C16-MS. . ................8-59
A10C17-HP. . ..................8-60
A10C17-LP. . ...................8-60
A10C17-MP. . .................8-60
A10C18-HF. . ..................8-61
A10C18-LF. . ...................8-61
A10C18-MF. . .................8-61
A10R 4-1500. ..................8-45
A10R 4-1501. ..................8-45
A10R 4-1502. ..................8-46
A10R 4-1503. ..................8-46
A10R 4-1504. ..................8-47
A10R 4-1505. ..................8-47
A10R 4-1506. ..................8-48
A10R 4-1507. ..................8-48
A10R 4-1508. ..................8-49
A10R 4-1509. ..................8-49
A10R 9-. ..........................8-90
A10R10-. .........................8-88
A10R11-A00....................8-89
A10R11-B11....................8-89
A10R12-F. .......................8-87
A10R12-R. ......................8-87
A10Y15-...M. . ................8-63
A10Y15-. . .......................8-63
A10Y15-3921003.............8-65
A10Z 1-321. ....................8-12
A10Z 1-322. ....................8-13
A10Z 1-323. ....................8-14
A10Z 2-3. . ......................8-20
A10Z 2-301. ....................8-17
A10Z 2-302. ....................8-16
A10Z 2-304. . ..................8-31
A10Z 2-305. ....................8-19
A10Z 2-306. ....................8-32
A10Z 2-307. ....................8-18
A10Z 2-308. ....................8-27
A10Z 2-310. ....................8-23
A10Z 2-311. ....................8-22
A10Z 2-312. ....................8-26
A10Z 2-314. ....................8-25
A10Z 2-315. ....................8-24
A10Z 2-316. ....................8-21
A10Z 2-319. ....................8-28
A10Z 2-330B...................8-29
A10Z 4-155. ....................8-44
xvii
R
T
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
PART NUMBER INDEX

R
T
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
A10Z 4-1550. ..................8-43

A10Z 5-101C1.................8-73
A10Z 5-110C...................8-72
A10Z 5-120A. .................8-74
A10Z 6-520B...................8-75
A10Z 7-1001....................8-77
A10Z 7-1020. ..................8-30
A10Z 7-90. ......................8-76
A10Z 8-. . ........................8-15
A10Z19-701.S. ...............8-51
A10Z22-72. . ...................8-54
A10Z22M72. . .................8-54
A10Z25-0. . .....................8-84
A10Z25-LM. ...................8-86
A10Z27-302.A.................8-57
A10Z27M302.C...............8-57
A10Z28-164. ...................8-56
A10Z30-227. ...................8-67
A10Z31-246. ...................8-68
A10Z32-1001. ............8-70
A10Z32-1002. ............8-71
A10Z33-1133-. ...............8-58
A10Z36-7001S. ..............8-55
A10Z40-1210.1................8-35
A10Z40-1210.2................8-35
A10Z40-1210.4................8-35
A10Z40-1210C3..............8-35
A10Z40-1215..1...............8-36
A10Z40-1215..2...............8-36
A10Z40-1215..3...............8-36
A10Z40-1215..4...............8-36
A10Z40-1220..1...............8-38
A10Z40-1220..3...............8-38
A10Z40-1220..4...............8-38
A10Z40-1220DD2...........8-38
A10Z40-1240. .................8-50
A10Z40-1260..2...............8-37
A10Z40-1260..3...............8-37
A10Z40-1260..4...............8-37
A10Z40-1280. .................8-39
A10Z42-. . .......................8-40
A10Z42-A. . ....................8-41
A10Z50-88. .....................8-52
A10Z51-8845...................8-53
A10Z52-F. . .....................8-80
A10Z52-FD..................8-80
A10Z53-F. . .....................8-78
A10Z53-FD..................8-78
A10Z60-FB. . ..................8-33
A10Z60-MB. . ................8-34
A10Z60-MF. . ..................8-33
A10Z60-MM. . ...............8-34
A10Z62-GC. ....................8-10
A10Z62-GT. ....................8-10
A10Z62-NP. . ..................8-11
xviii
A10Z62-SN. ...................8-9
A10Z64-MN. ..................8-7
A10Z64-SF. .....................8-6
A10Z64-TH. ....................8-7
A14Z 6-74. . ....................2-14
A16A 3-. . .......................2-10
A16A 4-. . .......................2-10
A16A25M. . ....................2-11
A16A28M. . ....................2-11
A16A51M. . ....................2-12
A16A53M. . ....................2-12
A16A55M. . ....................2-13
A16A58M. . ....................2-13
A1C25. . ..........................1-255
A1C26. . ..........................1-255
A1Y25. . ..........................1-255
A1Y26. . ..........................1-255
A26R 3. . .........................2-54
A26R 4. . .........................2-99
A26R51M. . ....................2-161
A26R53M. . ....................2-175
A26R55M. . ....................2-192
A26Z16. . ........................2-18
A40C01-1970. . .............16-38
A40C01-2560. . .............16-39
A40C01-3150. . .............16-40
A40C01-394. . ...............16-41
A40C01-472. . ...............16-42
A40C02-1970. . .............16-38
A40C02-2560. . .............16-39
A40C02-3150. . .............16-40
A40C02-394. . ...............16-41
A40C02-472. . ...............16-42
A40C03-1970. . .............16-43
A40C03-315. . ...............16-44
A40C03-394. . ...............16-45
A40C03-4720. . .............16-46
A40C04-315. . ...............16-47
A40C04-394. . ...............16-48
A40C09-488. . ...............16-49
A40C10-488. . ...............16-51
A40X01-1570. . .............16-21
A40X01-1970. . .............16-22
A40X01-2560. . .............16-23
A40X01-3150. . .............16-24
A40X01-394. . ...............16-25
A40X01-472. . ...............16-26
A40X01-551. . ...............16-27
A40X02-1570. . .............16-21
A40X02-1970. . .............16-22
A40X02-2560. . .............16-23
A40X02-3150. . .............16-24
A40X02-394. . ...............16-25
A40X02-472. . ...............16-26
A40X02-551. . ...............16-27
A40X03-1970. . .............16-28
A40X03-315. . ...............16-30
A40X03-3150. . .............16-29
A40X03-394. . ...............16-31
A40X03-472. . ...............16-32
A40X04-315. . ...............16-34
A40X04-3150. . .............16-33
A40X04-394. . ...............16-35
A40X09-3350. . .............16-52
A40X09-484. . ...............16-54
A40X10-3350. . .............16-53
A40X10-484. . ...............16-55
A42Z01-1570. . .............16-3
A42Z01-1970. . .............16-4
A42Z01-2560. . .............16-5
A42Z01-3270. . .............16-6
A42Z01-406. . ...............16-7
A42Z01-484. . ...............16-8
A42Z02-1570. . .............16-3
A42Z02-1970. . .............16-4
A42Z02-2560. . .............16-5
A42Z02-3270. . .............16-6
A42Z02-406. . ...............16-7
A42Z02-484. . ...............16-8
A42Z03-1570. . .............16-12
A42Z03-1970. . .............16-13
A42Z03-2560. . .............16-14
A42Z03-3270. . .............16-15
A42Z03-406. . ...............16-16
A42Z03-484. . ...............16-17
A42Z04-1570. . .............16-12
A42Z04-1970. . .............16-13
A42Z04-2560. . .............16-14
A42Z04-3270. . .............16-15
A42Z04-406. . ...............16-16
A42Z04-484. . ...............16-17
A42Z05-3270. . .............16-9
A42Z05-406. . ...............16-10
A42Z05-484. . ...............16-11
A42Z06-3270. . .............16-9
A42Z06-406. . ...............16-10
A42Z06-484. . ...............16-11
A42Z07-3270. . .............16-18
A42Z07-406. . ...............16-19
A42Z07-484. . ...............16-20
A42Z08-3270. . .............16-18
A42Z08-406. . ...............16-19
A42Z08-484. . ...............16-20
A45X01-. . .....................16-36
A45X02-. . .....................16-37
A7C 1-. . ..........................3-14
A7Q 1-. . .........................3-14
A9B44-A. . ....................10-43
A9Q18-. . ......................10-12
A9X18-. . .......................10-12
PART NUMBER INDEX

A9Y44-A. . ....................10-43
AB3401-EA. . ...............10-59
AB3401-XP. . ................10-59
S1023Z-096A. . ..............1-31
S1023Z-096S. . ...............1-31
S1023Z-120A. . ..............1-28
S1023Z-120S. . ...............1-28
S1043Z-096A. . ..............1-32
S1043Z-096S. . ...............1-32
S1043Z-120A. . ..............1-29
S1043Z-120S. . ...............1-29
S1063Z-048A. . ..............1-77
S1063Z-048S. . ...............1-77
S1063Z-064A. . ..............1-57
S1063Z-064S. . ...............1-57
S1063Z-072A. . ..............1-43
S1063Z-072S. . ...............1-43
S1063Z-080A. . ..............1-39
S1063Z-080S. . ...............1-39
S1063Z-096A. . ..............1-33
S1063Z-096S. . ...............1-33
S1064Z-048A. . ..............1-78
S1064Z-048S. . ...............1-78
S1064Z-064A. . ..............1-58
S1064Z-064S. . ...............1-58
S1064Z-072A. . ..............1-44
S1064Z-072S. . ...............1-44
S1064Z-080A. . ..............1-40
S1064Z-080S. . ...............1-40
S1064Z-096A. . ..............1-34
S1064Z-096S. . ...............1-34
S1066Z-024A. . ..............1-129
S1066Z-024S. . ...............1-129
S1066Z-032A. . ..............1-105
S1066Z-032S. . ...............1-105
S1066Z-048A. . ..............1-79
S1066Z-048S. . ...............1-79
S1066Z-064A. . ..............1-60
S1066Z-064S. . ...............1-60
S1066Z-072A. . ..............1-45
S1066Z-072S. . ...............1-45
S1066Z-096A. . ..............1-35
S1066Z-096S. . ...............1-35
S1084Y-PC-. ...................2-263
S1084Z-024A. . ..............1-130
S1084Z-024DS. . ............1-136
S1084Z-024S. . ...............1-130
S1084Z-032A. . ..............1-106
S1084Z-032DS. . ............1-112
S1084Z-032S. . ...............1-106
S1084Z-048A. . ..............1-81
S1084Z-048DS. . ............1-86
S1084Z-048S. . ...............1-81
S1084Z-064A. . ..............1-62
S1084Z-064DS. . ............1-66
S1084Z-064S. . ...............1-62
S1084Z-072A. . ..............1-46
S1084Z-072DS. . ............1-50
S1084Z-072S. . ...............1-46
S1086Z-024A. . ..............1-131
S1086Z-024DS. . ............1-136
S1086Z-024S. . ...............1-131
S1086Z-032A. . ..............1-107
S1086Z-032DS. . ............1-112
S1086Z-032S. . ...............1-107
S1086Z-048A. . ..............1-82
S1086Z-048DS. . ............1-86
S1086Z-048S. . ...............1-82
S1086Z-064A. . ..............1-63
S1086Z-064DS. . ............1-66
S1086Z-064S. . ...............1-63
S1086Z-072A. . ..............1-47
S1086Z-072DS. . ............1-50
S1086Z-072S. . ...............1-47
S10A12-P. . ................2-206
S10A13-P. . ................2-212
S10A14-P. . ................2-215
S10A15-P. . ................2-209
S10A6Z-024H. . ..............1-25
S10A6Z-032H. . ..............1-22
S10A6Z-048H. . ..............1-19
S10A8Z-024H. . ..............1-26
S10A8Z-032H. . ..............1-23
S10A8Z-048H. . ..............1-20
S10A9Z-024H. . ..............1-27
S10A9Z-032H. . ..............1-24
S10A9Z-048H. . ..............1-21
S10C6Z-024H. . ..............1-25
S10C6Z-032H. . ..............1-22
S10C6Z-048H. . ..............1-19
S10C8Z-024H. . ..............1-26
S10C8Z-032H. . ..............1-23
S10C8Z-048H. . ..............1-20
S10C9Z-024H. . ..............1-27
S10C9Z-032H. . ..............1-24
S10C9Z-048H. . ..............1-21
S10S12-P. . .................2-206
S10S13-P. . .................2-212
S10S14-P. . .................2-215
S10S15-P. . .................2-209
S1163Z-064A. . ..............1-68
S1163Z-064S. . ...............1-68
S1163Z-072A. . ..............1-51
S1163Z-072S. . ...............1-51
S1163Z-096A. . ..............1-36
S1163Z-096S. . ...............1-36
S1164Z-048A. . ..............1-93
S1164Z-048S. . ...............1-93
S1164Z-064A. . ..............1-69
S1164Z-064S. . ...............1-69
S1164Z-072A. . ..............1-52
S1164Z-072S. . ...............1-52
S1164Z-080A. . ..............1-41
S1164Z-080S. . ...............1-41
S1166Z-024A. . ..............1-140
S1166Z-024S. . ...............1-140
S1166Z-032A. . ..............1-117
S1166Z-032S. . ...............1-117
S1166Z-048A. . ..............1-94
S1166Z-048S. . ...............1-94
S1166Z-064A. . ..............1-70
S1166Z-064S. . ...............1-70
S1166Z-072A. . ..............1-53
S1166Z-072S. . ...............1-53
S1168Z-064A. . ..............1-71
S1168Z-064S. . ...............1-71
S1186Y-PF-. . .................2-263
S11A12-P250..............2-207
S11A13-P250..............2-213
S11A14-P250..............2-216
S11A15-P250..............2-210
S11S12-P250..............2-207
S11S13-P250..............2-213
S11S14-P250..............2-216
S11S15-P250..............2-210
S1228Y-GA-. ................10-83
S1228Y-GC-. .................10-84
S1239Z-096A. . ..............1-38
S1239Z-096S. . ...............1-38
S1249Z-064A. . ..............1-75
S1249Z-064S. . ...............1-75
S1249Z-096A. . ..............1-38
S1249Z-096S. . ...............1-38
S1268Y-SCB-..P..............1-231
S1268Z-024A. . ..............1-141
S1268Z-024M. . .............1-145
S1268Z-024S. . ...............1-141
S1268Z-032A. . ..............1-118
S1268Z-032M. . .............1-125
S1268Z-032S. . ...............1-118
S1268Z-048A. . ..............1-96
S1268Z-048M. . .............1-102
S1268Z-048S. . ...............1-96
S1268Z-064A. . ..............1-72
S1268Z-064M. . .............1-74
S1268Z-064S. . ...............1-72
S1268Z-072A. . ..............1-54
S1268Z-072M. . .............1-55
S1268Z-072S. . ...............1-54
S1268Z-080A. . ..............1-42
S1268Z-080S. . ...............1-42
S1268Z-096A. . ..............1-37
S1268Z-096S. . ...............1-37
S1268Z-120A. . ..............1-30
S1268Z-120S. . ...............1-30
S1269Z-064A. . ..............1-75
S1269Z-064S. . ...............1-75
S1269Z-072A. . ..............1-56
xix
R
T
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
PART NUMBER INDEX

R
T
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
S1269Z-072S. . ...............1-56
S1288Z-024D. . ..............1-135
S1288Z-032D. . ..............1-111
S1288Z-048D. . ..............1-85
S1288Z-064D. . ..............1-65
S1288Z-072D. . ..............1-49
S1289Z-048A. . ..............1-97
S1289Z-048S. . ...............1-97
S12A8Z-024PC. . ...........1-144
S12A8Z-032PC. . ...........1-124
S12A8Z-048PC. . ...........1-101
S12ABZ-024PC. . ...........1-144
S12ABZ-032PC. . ...........1-124
S12ABZ-048PC. . ...........1-101
S12C8Z-016PC. . ............1-146
S12C8Z-024PC. . ............1-144
S12C8Z-032PC. . ............1-124
S12C8Z-048PC. . ............1-101
S12CBZ-016PC. . ...........1-146
S12CBZ-024PC. . ...........1-144
S12CBZ-032PC. . ...........1-124
S12CBZ-048PC. . ...........1-101
S12E8Z-016PC. . ............1-146
S12EBZ-016PC. . ...........1-146
S1343Z-72. . ...................1-198
S1344Z-64. . ...................1-200
S1346Z-48. . ...................1-202
S1353Z-72. . ...................1-199
S1354Z-64. . ...................1-201
S1356Z-48. . ...................1-203
S180.Y-RA-.P..................1-194
S181.Y-RB-.P..................1-194
S181.Y-RC-. ....................1-195
S181.Y-RC-.A..................1-195
S1819Y-RD..P..................1-196
S1A5...A-C048A. . ..........1-164
S1A5...A-C048S. . ..........1-164
S1A5...A-C064A. . ..........1-161
S1A5...A-C064S. . ..........1-161
S1A5...A-C072A. . ..........1-158
S1A5...A-C072S. . ..........1-158
S1A5...A-C080A. . ..........1-155
S1A5...A-C080S. . ..........1-155
S1A5...A-C096A. . ..........1-153
S1A5...A-C096S. . ..........1-153
S1A5...A-C120A. . ..........1-150
S1A5...A-C120S. . ..........1-150
S1A5...A-F048A. . ..........1-162
S1A5...A-F048S. . ..........1-162
S1A5...A-F064A. . ..........1-159
S1A5...A-F064S. . ..........1-159
S1A5...A-F072A. . ..........1-156
S1A5...A-F072S. . ..........1-156
S1A5...A-F096A. . ..........1-151
S1A5...A-F096S. . ..........1-151
S1A5...A-F120A. . ..........1-148
xx
S1A5...A-F120S. . ..........1-148
S1A5...A-P048A. . ..........1-164
S1A5...A-P048S. . ..........1-164
S1A5...A-P064A. . ..........1-161
S1A5...A-P064S. . ..........1-161
S1A5...A-P072A. . ..........1-158
S1A5...A-P072S. . ..........1-158
S1A5...A-P080A. . ..........1-155
S1A5...A-P080S. . ..........1-155
S1A5...A-P096A. . ..........1-153
S1A5...A-P096S. . ..........1-153
S1A5...A-P120A. . ..........1-150
S1A5...A-P120S. . ..........1-150
S1A86A-C024A. . ...........1-166
S1A86A-C024S. . ...........1-166
S1A86A-C032A. . ...........1-165
S1A86A-C032S. . ...........1-165
S1A86A-P024A. . ...........1-166
S1A86A-P024S. . ...........1-166
S1A86A-P032A. . ...........1-165
S1A86A-P032S. . ...........1-165
S1B8.A-C048BD........1-211
S1B8.A-C048BQ........1-211
S1B8.A-C048BS.........1-211
S1B8.A-C064B. . ............1-209
S1B8.A-P048BD........1-211
S1B8.A-P048BQ........1-211
S1B8.A-P064B. . ............1-209
S1B8A-P048BS.....1-211
S1C8.Z-P048B...Q...........1-210
S1C8.Z-P048BD.........1-210
S1C8.Z-P048BS.........1-210
S1C8.Z-P064B. . ............1-208
S1D9.Z-P048SD..............1-210
S1D9.Z-P048SQ..............1-210
S1D9.Z-P048SS..............1-210
S1D9.Z-P064S. . ............1-208
S1E6.Z-024A. . ...............1-192
S1E6.Z-024S. . ...............1-192
S1E6.Z-032A. . ...............1-192
S1E6.Z-032S. . ...............1-192
S1E6.Z-048A. . ...............1-191
S1E6.Z-048S. . ...............1-191
S1E6.Z-064A. . ...............1-191
S1E6.Z-064S. . ...............1-191
S1E6.Z-072A. . ...............1-190
S1E6.Z-072S. . ...............1-190
S1E6.Z-096A. . ...............1-190
S1E6.Z-096S. . ...............1-190
S1F.4Z-.048S0. ...............1-181
S1F.4Z-.064S0. ...............1-179
S1F.4Z-.072S0. ...............1-178
S1F.4Z-.080S0. ...............1-177
S1F.6Z-.048S0. ...............1-182
S1F.6Z-.064S0. ...............1-180
S1G8.Z-. . .......................1-12
S1H8.Z-. . .......................1-13
S1L86Z-P048A. . ............1-188
S1L86Z-P048S. . ............1-188
S1M5...A-F064A. . .........1-175
S1M5...A-F064S. . .........1-175
S1M5...A-F072A. . .........1-173
S1M5...A-F072S. . .........1-173
S1M5...A-F080A. . .........1-171
S1M5...A-F080S. . .........1-171
S1M5...A-F096A. . .........1-169
S1M5...A-F096S. . .........1-169
S1M5...A-F120A. . .........1-167
S1M5...A-F120S. . .........1-167
S1R86Z-P048A. . ...........1-188
S1R86Z-P048S. . ............1-188
S1V84Z-024DS. . ...........1-134
S1V84Z-032DS. . ...........1-110
S1V84Z-048DS. . ...........1-84
S1V84Z-064DS. . ...........1-64
S1V84Z-072DS. . ...........1-48
S1V86Z-024DS. . ...........1-134
S1V86Z-032DS. . ...........1-110
S1V86Z-048DS. . ...........1-84
S1V86Z-064DS. . ...........1-64
S1V86Z-072DS. . ...........1-48
S1VS24-. . ......................1-128
S1VS32-. . ......................1-104
S1VS48-. . ......................1-76
S2006Y-. . .......................1-226
S20R6Y-. . .......................1-229
S2106Y-. . .......................1-230
S21BPY-. . ......................4-9
S21HSC-. . ......................4-10
S21R6Y-. . .......................1-229
S21SAC-. . ......................4-15
S25CY9-PC. . ..................4-17
S25FB9-PC. . ..................4-16
S25FLY-. . ........................4-14
S25FY9-PC. . ..................4-16
S2706Y-. . .......................1-227
S2910Y-M. . ....................6-59
S2F06Y-. . .......................1-225
S300.Y-. . ......................11-40
S310.Y-. . ......................11-32
S3200Y-C. . .....................1-246
S3200Y-J. . .....................1-247
S3201Y-C. . .....................1-246
S3201Y-J. . .....................1-247
S3300Y-C. . .....................1-234
S3300Y-J. . .....................1-235
S3301Y-C. . .....................1-236
S3301Y-J. . .....................1-237
S3400Y-C. . .....................1-251
S3400Y-J. . .....................1-251
S3401Y-C. . .....................1-248
S3401Y-J. . .....................1-249
PART NUMBER INDEX

S3402Y-C. . .....................1-250
S3402Y-J. . .....................1-250
S3501Y-C. . .....................1-242
S3501Y-J. . .....................1-243
S3502Y-C. . .....................1-244
S3502Y-J. . .....................1-245
S3503Y-J. . .....................1-243
S35SFX-00122169..........6-13
S35SFX-01122216..........6-14
S35SFX-02169279..........6-15
S35SFX-03222362..........6-16
S3600Y-C. . .....................1-252
S3600Y-J. . .....................1-253
S3700Y-C. . .....................1-238
S3700Y-J. . .....................1-239
S3701Y-C. . .....................1-240
S3701Y-J. . .....................1-241
S38..Y-C. . .....................11-41
S3900Y-C136.................11-41
S4008Y-US1. . ................3-2
S4012Y-US2. . ................3-2
S4016Y-US3. . ................3-2
S40AW6-. . .....................3-13
S40PH0-CHS. . ..............3-5
S40PX0-CHS. . ...............3-6
S40PX0-HG. . .................3-3
S49P..0-. . ........................3-15
S5...Y-G50-. ....................6-77
S5000Y-. . .......................4-19
S50BPH-P. . ....................6-7
S50DCM-. . ....................6-52
S50DY9-C. . ....................6-22
S50FLR-. . .......................6-65
S50FLS-. . .......................6-65
S50FP9-FBC. . ................6-6
S50FSR-. . ......................6-63
S50FSS-. . ......................6-63
S50HAA-H. . ..............6-28
S50HAA-P. . ...............6-29
S50HAD-H. . ..............6-34
S50HAM-H. . .............6-32
S50HAM-P. . ..............6-33
S50HWH-H. . .............6-26
S50HWH-P. . ..............6-27
S50HWM-H. . ............6-30
S50HWM-P. . .............6-31
S50KB9-HT. . ..................6-21
S50MDD-H..H. ..........6-49
S50MDS-H..H. ..........6-48
S50MHS-H..H. ..........6-50
S50MHW-H..H. .........6-51
S50MSC-A..H..H. ..........6-37
S50MSC-S..H..H. ...........6-36
S50MSK-...K..K. .............6-41
S50MSK-S..K..K. ...........6-40
S50MST-A..P..P. .............6-39
S50MST-S..P..P. .............6-38
S50MSX-...H..H. ............6-42
S50MSX-P..P. .............6-43
S50MTD-P..P. .............6-47
S50PLR-. . ......................6-66
S50PLS-. . ......................6-66
S50PMR-. . .....................6-62
S50PSR-. . ......................6-64
S50PSS-. . ......................6-64
S50PY9-R. . ....................6-23
S50SFX-000. . ................6-13
S50SFX-00H..H. .............6-13
S50SFX-01. . ..................6-14
S50SFX-01H..H. .............6-14
S50SFX-02. . ..................6-15
S50SFX-02H..H. .............6-15
S50SFX-03. . ..................6-16
S50SFX-03H..H. .............6-16
S50TLC-..H..H. ...............6-44
S50TLS-..P..P. .................6-45
S5189Y-GB-. ................10-85
S5189Y-GD-. ................10-84
S51FCZ-. . .......................6-76
S5200Y-. . .......................4-19
S52FCY-. . .......................4-20
S55PP7-FS. . ..................6-80
S55SS7-FS. . ..................6-81
S57PY4-DFU0. . .............7-5
S57PY4-DFUT. . .............7-10
S57PY4-SFU0. . .............7-5
S57PY5-DU0. . ...............7-4
S57PY5-DUT. . ...............7-10
S57PY5-SU0. . ...............7-4
S58P.5-MJC. . ................6-73
S58PY5-MJC. . ..............6-73
S58PZ5-MJC. . ..............6-73
S5901Y-GU-. ................10-41
S5901Y-KN-0. ..............10-40
S5901Y-KN-1. ..............10-40
S5904Y-G409-. ...............6-25
S5904Y-G410-. ...............6-25
S5921Y-SO10-. . ...........10-99
S5925Y-S02.-. ................6-77
S5930Y-M. ......................6-59
S59DZ6-TT0. . ................6-78
S59DZ9-CF. . ..................6-60
S59DZ9-HCF. . ................6-61
S59PQ5-TBS. . ...............4-23
S59PY5-TBS. . ...............4-22
S60SFX-00213122..........6-13
S60SFX-01213122..........6-14
S60SFX-02258169..........6-15
S60SFX-03317222..........6-16
S61AA3-DHH. . ..............5-111
S61AA3-SHH. . ..............5-111
S61GPB-. . .....................5-103
S61HA2-MPH. . .............5-112
S61PA1-BMP. . ..............5-112
S61PPC-. . ......................5-97
S61PPZ-. . ......................5-98
S61PSC-. . ......................5-97
S61PSZ-. . ......................5-98
S62GFR-. . ......................5-109
S62GMR-. . ....................5-108
S6400-SO33-. ...............10-101
S6900Y-GE-1.................10-87
S6900Y-GF-. .................10-87
S6900Y-GG-. ................10-87
S6900Y-SR. . ..................3-15
S705ZY-D. . ..................10-30
S7092Y-G42-. . .............10-9
S7092Y-G44-. . .............10-7
S7210Y-. . .....................10-77
S7220Y-. . .....................10-75
S7250Y-. . .....................10-79
S7270Y-. . .....................10-88
S73HW2-100-. . ...........10-64
S73KW2-131-. .............10-63
S73LW2-ER133-. . .......10-68
S73LW2-ER133-98C.....10-68
S73NW2-GR555-. ........10-63
S73PH1-PIR. . ..............10-62
S740YY-. . .....................10-51
S77.0Y-SET...............15-49
S77A.Y-SET..............15-50
S77P.Y-0. . .....................15-51
S77RH1-. . ......................4-26
S77RH2-. . ......................4-28
S77RY1-. . .......................4-26
S77RY2-. . .......................4-28
S78ASY-. . ....................10-93
S78CSY-. . ....................10-91
S78ESY-. . .....................10-89
S78TSY-. . .....................10-93
S7912Y-32AF. . ...............2-205
S7912Y-32SS. . ..............2-205
S7912Y-C32AF. . .............2-204
S7912Y-C32SS. . ............2-204
S7913Y-20AF. . ...............2-211
S7913Y-20SS. . ..............2-211
S7914Y-20AFT. . .............2-214
S7914Y-20SST. . .............2-214
S7915Y-CPAFT. . ............2-208
S7915Y-CPSST. . ............2-208
S79RUB-. . .....................4-15
S7AYPA-. . ....................15-31
S7NPCY-. . ...................15-25
S9011A-T. . ...................13-54
S9018A-T. . ...................13-56
S90BF9-..A. ..................13-31
S90BRC-11A03.............13-32
S90BRP-22A. ...............13-33
xxi
R
T
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
PART NUMBER INDEX

R
T
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
S90CF9-..A. . ................13-37
S90CFC-..A. . ................13-38
S90CS9-..A. . ................13-35
S90CSC-..A. . ...............13-36
S90HYC-. . ....................13-23
S90MCC-513. . .............13-14
S90MCC-806. . .............13-16
S90MCC-MTL. . ...........13-15
S90MPA-B..D. . ...........13-49
S90MPA-C..D. . ...........13-48
S90MPF-126.................13-52
S90MPS-24...................13-51
S90MPS-24M...............13-51
S90MPS-24MC............13-50
S90MPU-BIP67............13-53
S90SB9-..A. . ...............13-29
S90SWA-18A. . ............13-27
S90SWAM18A. . .........13-27
S90SWB-13A. . ...........13-26
S90SWBM13A. . .........13-26
S9108A-P0. . ................11-10
S9111A-P. . ...................11-12
S9111A-T6017-. ...........11-23
S9111A-T6018-. ...........11-24
S9111A-T6019-. ...........11-25
S9111A-T617. ..............11-11
S9111A-T618. ..............11-13
S9111A-T619. ..............11-14
S9111A-T640. . ............11-15
S9111A-T641. . ............11-16
S9111A-T642. . ............11-17
S9111M-. . ....................14-7
S9114M-. . ....................14-9
S9115A-P. . ...................11-20
S9115A-T0623-. ...........11-26
S9115A-T1623-. ...........11-28
S9115A-T623-. .............11-18
S9115A-T623A-. ..........11-19
S9117A-CG. . ...............11-52
S9117A-EG. . ................11-59
S9117A-PG. . ...............11-55
S9117C-S18GM0. . ......14-2
S9117D-SREG. . ...........11-84
S9117D-SRPG. . ..........11-76
S9117E-SDEG. . ...........11-110
S9117E-SDPG. . ...........11-102
S9117M-. . ....................14-11
S9118A-P. . ...................11-22
S9118A-T0628-. ...........11-30
S9118A-T1628-. ...........11-31
S9118A-T628. . ............11-21
S9123A-CG. . ...............11-53
S9123A-EG. . ................11-60
S9123A-PG. . ...............11-56
S9123A-PRX. . .............11-47
S9123A-RTX. . .............11-49
xxii
S9123A-SG. . ...............11-72
S9123C-S18GM0. . ......14-3
S9123D-SREG. . ...........11-86
S9123D-SRPG. . ..........11-78
S9123D-SRSG. . ..........11-98
S9123E-SDEG. . ...........11-112
S9123E-SDPG. . ...........11-104
S9123E-SDSG. . ...........11-118
S9123M-. . ....................14-13
S9123R-R. . ..................11-92
S9123T-. . ......................11-66
S9134A-CG. . ...............11-54
S9134A-EG. . ................11-61
S9134A-PG. . ...............11-57
S9134A-PRX. . .............11-48
S9134A-RTX. . .............11-50
S9134A-SG. . ...............11-73
S9134D-SREG. . ...........11-88
S9134D-SRPG. . ..........11-80
S9134D-SRSG. . ..........11-99
S9134E-SDEG. . ...........11-114
S9134E-SDPG. . ...........11-106
S9134E-SDSG. . ...........11-119
S9134M-. . ....................14-17
S9134R-R. . ..................11-94
S9134T-. . ......................11-68
S9142A-EG. . ................11-62
S9142A-PG. . ...............11-58
S9142A-SG. . ...............11-74
S9142D-SREG. . ...........11-90
S9142D-SRPG. . ..........11-82
S9142D-SRSG. . ..........11-100
S9142E-SDEG. . ...........11-116
S9142E-SDPG. . ...........11-108
S9142E-SDSG. . ...........11-120
S9142M-. . ....................14-21
S9142R-R. . ..................11-96
S9142T-. . ......................11-70
S9200A-G163-. ............15-5
S94.0A-T70. .................15-8
S95.0A-TS. ...................15-7
S9540A-TS7..................15-11
S9540A-TS9..................15-11
S970...A-Z2DAP.........1-163
S970...A-Z2D-P..........1-163
S970...A-Z2EAP.........1-160
S970...A-Z2E-P...........1-160
S970...A-Z2FAP..........1-157
S970...A-Z2F-P...........1-157
S970...A-Z2GAP.........1-154
S970...A-Z2G-P..........1-154
S970...A-Z2HAP.........1-152
S970...A-Z2H-P..........1-152
S970...A-Z2JAP.........1-149
S970...A-Z2J-P...........1-149
S970...A-Z3DAP.........1-163
S970...A-Z3D-P..........1-163
S970...A-Z3EAP.........1-160
S970...A-Z3E-P...........1-160
S970...A-Z3FAP..........1-157
S970...A-Z3F-P...........1-157
S970...A-Z3GAP.........1-154
S970...A-Z3G-P..........1-154
S970...A-Z3HAP.........1-152
S970...A-Z3H-P..........1-152
S970...A-Z3JAP.........1-149
S970...A-Z3J-P...........1-149
S970...A-Z4DAP.........1-163
S970...A-Z4D-P..........1-163
S970...A-Z4EAP.........1-160
S970...A-Z4E-P...........1-160
S970...A-Z4FAP..........1-157
S970...A-Z4F-P...........1-157
S970...A-Z4GAP.........1-154
S970...A-Z4G-P..........1-154
S970...A-Z4HAP.........1-152
S970...A-Z4H-P..........1-152
S970...A-Z4JAP.........1-149
S970...A-Z4J-P...........1-149
S970...A-Z5DAP.........1-163
S970...A-Z5D-P..........1-163
S970...A-Z5EAP.........1-160
S970...A-Z5E-P...........1-160
S970...A-Z5FAP..........1-157
S970...A-Z5F-P...........1-157
S970...A-Z5GAP.........1-154
S970...A-Z5G-P..........1-154
S970...A-Z5HAP.........1-152
S970...A-Z5H-P..........1-152
S970...A-Z5JAP.........1-149
S970...A-Z5J-P...........1-149
S970...A-Z6DAP.........1-163
S970...A-Z6D-P..........1-163
S970...A-Z6EAP.........1-160
S970...A-Z6E-P...........1-160
S970...A-Z6FAP..........1-157
S970...A-Z6F-P...........1-157
S970...A-Z6GAP.........1-154
S970...A-Z6G-P..........1-154
S970...A-Z6HAP.........1-152
S970...A-Z6H-P..........1-152
S970...A-Z6JAP.........1-149
S970...A-Z6J-P...........1-149
S970...A-Z7DAP.........1-163
S970...A-Z7D-P..........1-163
S970...A-Z7EAP.........1-160
S970...A-Z7E-P...........1-160
S970...A-Z7FAP..........1-157
S970...A-Z7F-P...........1-157
S970...A-Z7GAP.........1-154
S970...A-Z7G-P..........1-154
S970...A-Z7HAP.........1-152
PART NUMBER INDEX

S970...A-Z7H-P..........1-152
S970...A-Z7JAP.........1-149
S970...A-Z7J-P...........1-149
S971...A-Z2EAP.........1-176
S971...A-Z2E-P...........1-176
S971...A-Z2FAP..........1-174
S971...A-Z2F-P...........1-174
S971...A-Z2GAP.........1-172
S971...A-Z2G-P..........1-172
S971...A-Z2HAP.........1-170
S971...A-Z2H-P..........1-170
S971...A-Z2JAP.........1-168
S971...A-Z2J-P...........1-168
S971...A-Z3EAP.........1-176
S971...A-Z3E-P...........1-176
S971...A-Z3FAP..........1-174
S971...A-Z3F-P...........1-174
S971...A-Z3GAP.........1-172
S971...A-Z3G-P..........1-172
S971...A-Z3HAP.........1-170
S971...A-Z3H-P..........1-170
S971...A-Z3JAP.........1-168
S971...A-Z3J-P...........1-168
S971...A-Z4EAP.........1-176
S971...A-Z4E-P...........1-176
S971...A-Z4FAP..........1-174
S971...A-Z4F-P...........1-174
S971...A-Z4GAP.........1-172
S971...A-Z4G-P..........1-172
S971...A-Z4HAP.........1-170
S971...A-Z4H-P..........1-170
S971...A-Z4JAP.........1-168
S971...A-Z4J-P...........1-168
S971...A-Z5EAP.........1-176
S971...A-Z5E-P...........1-176
S971...A-Z5FAP..........1-174
S971...A-Z5F-P...........1-174
S971...A-Z5GAP.........1-172
S971...A-Z5G-P..........1-172
S971...A-Z5HAP.........1-170
S971...A-Z5H-P..........1-170
S971...A-Z5JAP.........1-168
S971...A-Z5J-P...........1-168
S971...A-Z6EAP.........1-176
S971...A-Z6E-P...........1-176
S971...A-Z6FAP..........1-174
S971...A-Z6F-P...........1-174
S971...A-Z6GAP.........1-172
S971...A-Z6G-P..........1-172
S971...A-Z6HAP.........1-170
S971...A-Z6H-P..........1-170
S971...A-Z6JAP.........1-168
S971...A-Z6J-P...........1-168
S971...A-Z7EAP.........1-176
S971...A-Z7E-P...........1-176
S971...A-Z7FAP..........1-174
S971...A-Z7F-P...........1-174
S971...A-Z7GAP.........1-172
S971...A-Z7G-P..........1-172
S971...A-Z7HAP.........1-170
S971...A-Z7H-P..........1-170
S971...A-Z7JAP.........1-168
S971...A-Z7J-P...........1-168
S98CA6-MEC. . ............13-3
S98CA6-MOC. . ...........13-3
S9901Y-G. . .....................6-9
S9901Y-G404-. ...............6-11
S9901Y-G405-. ...............6-11
S9901Z-G404-. ...............6-18
S9901Z-G405-. ...............6-18
S9901Z-G406-. ...............6-20
S9901Z-G417-. ...............6-19
S9901Z-G418-. ...............6-19
S9904Y-GIM. . ..............15-3
S9906A-G150. ..............13-45
S9906A-MM.-. .............13-46
S9906A-MM7. .............13-44
S9909Y-GH-. ................10-86
S9911A-G400-4..............6-67
S9911A-G401-5..............6-67
S9911A-G407-. ..............6-67
S9912Y-FL. . ...............5-7
S9912Y-PS. . ..............5-6
S9912Y-G. . .....................5-8
S9912Y-TB. . ..................5-91
S9912Y-U. . .....................5-8
S9914F-G16. .................12-3
S9914F-G16L.................12-3
S9914F-G19. .................12-4
S9914F-G19L.................12-4
S9914F-G24. .................12-5
S9914F-G24L.................12-5
S9914F-G31. .................12-6
S9914F-G31L.................12-6
S9914Y-G1566-. ...........12-12
S9917Z-G51-. .................6-79
S991HY-A. . ..................12-25
S991HY-B. . ..................12-25
S991HY-C. . ..................12-24
S991MY-LH..............12-23
S991SY-. . .....................12-26
S9922Y-GJ-. .................10-86
S9930A-CF-. .................15-21
S9930A-CFS. . ..............15-22
S9930C-YN. . ................15-23
S9931A-C. ....................15-17
S9931A-P. .....................15-17
S9932Y-M. . ....................6-59
S9940Y-SWC. . ............13-7
S9941Y-SWC. . ............13-9
S9945Y-T. . ....................13-40
S9946Y-. . .....................13-42
S9957Y-UFM.................12-27
S99BP3-PB. . .................5-31
S99BP4-FB. . .................5-32
S99CAC-. . ......................5-24
S99CPC-. . ......................5-20
S99CPZ-. . ......................5-21
S99CSC-. . ......................5-22
S99CSZ-. . ......................5-23
S99FXD-. . ....................15-16
S99FXS-. . ....................15-15
S99GGF-. . ......................5-53
S99GGP-. . .....................5-52
S99GGT-. . ......................5-94
S99GHF-. . ......................5-61
S99GHP-. . .....................5-60
S99GLP-. . ......................5-27
S99GLZ-. . ......................5-28
S99GMC-. . ....................5-64
S99GMT-. . .....................5-96
S99GMY-. . .....................5-63
S99GSP-. . ......................5-29
S99GTF-. . ......................5-57
S99GTP-. . ......................5-56
S99GTT-. . .......................5-95
S99LBC-. . ......................5-14
S99LBO-. . .....................5-15
S99LHA-. . ......................5-18
S99LHC-. . ......................5-16
S99LHZ-. . ......................5-17
S99LSA-. . ......................5-18
S99LSC-. . ......................5-16
S99LSZ-. . .......................5-17
S99NH2-BN. . ................5-80
S99NH3-URC. . ..............5-87
S99NH3-URC. . ............13-17
S99NH4-URC. . ..............5-90
S99NH4-URC. . ............13-18
S99PS3-. . ......................5-25
S99PS4-. . ......................5-26
S99RH2-BNR. . ..............5-81
R
T
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
xxiii
16
FRACTIONAL & DECIMAL INCH & METRIC EQUIVALENTS

INCH
T
1/64
1
2
1/32
3/64
1/16
5/64
3/32
7/64
1/8
9/64
5/32
11/64
3/16
13/64
7
8
7/32
15/64
1/4
17/64
9/32
19/64
5/16
21/64
11/32
10
23/64
3/8
11
25/64
13/32
27/64
12
7/16
29/64
13
14
15
16
R-2
R-0
INCH
METRIC
Fractional
Decimal
mm
.00394
.00787
.01181
.015625
.01575
.01969
.02362
.02756
.03125
.0315
.03543
.03937
.046875
.0625
.078125
.07874
.09375
.109375
.11811
.125
.140625
.15625
.15748
.171875
.1875
.19685
.203125
.21875
.234375
.23622
.2500
.265625
.27559
.28125
.296875
.3125
.31496
.328125
.34375
.35433
.359375
.375
.390625
.3937
.40625
.421875
.43307
.4375
.453125
0.1
0.2
0.3
0.3969
0.4
0.5
0.6
0.7
0.7938
0.8
0.9
1.00
1.1906
1.5875
1.9844
2.00
2.3813
2.7781
3.00
3.175
3.5719
3.9688
4.00
4.3656
4.7625
5.00
5.1594
5.5563
5.9531
6.00
6.35
6.7469
7.00
7.1438
7.5406
7.9375
8.00
8.3344
8.7313
9.00
9.1281
9.525
9.9219
10.00
10.3188
10.7156
11.00
11.1125
11.5094
METRIC
Fractional
15/32
31/64
1/2
33/64
17/32
35/64
9/16
37/64
19/32
39/64
5/8
41/64
21/32
43/64
11/16
45/64
23/32
47/64
3/4
49/64
25/32
51/64
13/16
53/64
27/32
55/64
7/8
57/64
29/32
59/64
15/16
61/64
31/32
63/64
Decimal
mm
.46875
.47244
.484374
.5000
.51181
.515625
.53125
.546875
.55118
.5625
.578125
.59055
.59375
.609375
.625
.62992
.640625
.65625
.66929
.671875
.6875
.703125
.70866
.71875
.734375
.74803
.7500
.765625
.78125
.7874
.796875
.8125
.82677
.828125
.84375
.859375
.86614
.875
.890625
.90551
.90625
.921875
.9375
.94488
.953125
.96875
.98425
.984375
1.0000
11.9063
12.00
12.3031
12.70
13.00
13.0969
13.4938
13.8907
14.00
14.2875
14.6844
15.00
15.0813
15.4782
15.875
16.00
16.2719
16.6688
17.00
17.0657
17.4625
17.8594
18.00
18.2563
18.6532
19.00
19.05
19.4469
19.8438
20.00
20.2407
20.6375
21.00
21.0344
21.4313
21.8282
22.00
22.225
22.6219
23.00
23.0188
23.4157
23.8125
24.00
24.2094
24.6063
25.00
25.0032
25.4000
U.S. TO METRIC CONVERSION MULTIPLIERS

METRIC to U.S.
LENGTH
Millimeters
Meters
Meters
Meters
Kilometers
Kilometers
Kilometers
x 0.0394
x 39.3701
x 3.2808
x 1.0936
x 3280.84
x 0.6214
x 0.5396
= Inches
= Inches
= Feet
= Yards
= Feet
= Statute Miles
= Nautical Miles
AREA
Square mm
Square cm
Square Meters
Square Meters
Hectares
Square km
Square km
x 0.0016
x 0.1550
x 10.7639
x 1.1960
x 2.4711
x 247.105
x 0.3861
= Square Inches
= Square Inches
= Square Feet
= Square Yards
= Acres
= Acres
= Square Miles
Grams
x 15.4324
Grams
x 0.0353
Grams
x 0.0338
Kilograms
x 35.2740
Kilograms
x 2.2046
Metric Tons
x 1.1023
(1000 kg)
Metric Tons
x 0.9842
(1000 kg)
= Grains
= Ounces (Avd.)
= Fluid oz. (water)
= Ounces (Avd.)
= Pounds (Avd.)
= Net Ton
(2000 lbs.)
= Gross Ton
(2240 lbs.)
WEIGHT
U.S. to METRIC
Inches
Inches
Feet
Yards
Feet
Statute Miles
Nautical Miles
Square Inches
Square Inches
Square Feet
Square Yards
Acres
Acres
Square Miles
x 25.4000
x 0.0254
x 0.3048
x 0.9144
x 0.0003048
x 1.6093
x 1.8532
x 645.160
x 6.4516
x 0.0929
x 0.8361
x 0.4047
x 0.004047
x 2.5900
Grains
x 0.0648
Ounces (Avd.)
x 28.3495
Fluid oz. (water) x 29.5735
Ounces (Avd.)
x 0.0283
Pounds (Avd.)
x 0.4536
Net Ton
x 0.9072
(2000 lbs.)
Gross Ton
x 1.0160
(2240 lbs.)
= Millimeters
= Meters
= Meters
= Meters
= Kilometers
= Kilometers
= Kilometers
= Square mm
= Square cm
= Square Meters
= Square Meters
= Hectares
= Square km
= Square km
= Grams
= Grams
= Grams
= Kilograms
= Kilograms
= Metric Tons
(1000 kg)
= Metric Tons
(1000 kg)
T
1
2
3
4
5
6
7
TORQUE
FORCE
8
Newtons
Newtons
Kilograms force
Newton Meters
Newton Meters
Newton Meters
x 3.5969
x 0.2248
x 2.2046
x 141.6119
x 8.8508
x 0.7376
= Ounces force
= Pounds force
= Pounds force
= Ounce force Inches

= Pound force Inches
= Pound force Feet
Ounces force
Pounds force
Pounds force
Ounce force Inches

Pound force Inches
Pound force Feet
x 0.2780
x 4.4482
x 0.4536
x 0.0071
x 0.1130
x 1.3558
= Newtons
= Newtons
= Kilograms force
= Newton Meters
= Newton Meters
= Newton Meters
9
10
POWER
11
Kilowatt
Watt
x 1.3410
x 0.0013
= Horsepower
= Horsepower
Horsepower
Horsepower
x 0.7457
x 745.7122
= Kilowatt
= Watt
12
13
14
15
R-1
16
CONVERSION OF SMALL INCH TO mm

R
T
1
inches
mm
inches
mm
inches
mm
0.001
0.002
0.003
0.004
0.005
0.006
0.007
0.008
0.009
0.0254
0.0508
0.0762
0.1016
0.1270
0.1524
0.1778
0.2032
0.2286
0.01
0.02
0.03
0.04
0.05
0.06
0.07
0.08
0.09
0.254
0.508
0.762
1.016
1.270
1.524
1.778
2.032
2.286
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
2.54
5.08
7.62
10.16
12.70
15.24
17.78
20.32
22.86
2
inches
3
4
5
6
7
8
9
10
11
inches 0.0000
0.0002
0.0003
0.0004
0.0005
0.0006
0.0007
0.0008
0.0009
millimeters (mm)
0.000
0.001
0.002
.00000
.02540
.05080
.00254
.02794
.05334
.00508
.03048
.05588
.00762
.03302
.05842
.01016
.03556
.06096
.01270
.03810
.06350
.01524
.04064
.06604
.01778
.04318
.06858
.02032
.04572
.07112
.02286
.04826
.07366
0.003
0.004
0.005
.07620
.10160
.12700
.07874
.10414
.12954
.08128
.10668
.13208
.08382
.10922
.13462
.08636
.11176
.13716
.08890
.11430
.13970
.09144
.11684
.14224
.09398
.11938
.14478
.09652
.12192
.14732
.09906
.12446
.14986
0.006
0.007
0.008
.15240
.17780
.20320
.15494
.18034
.20574
.15748
.18288
.20828
.16002
.18542
.21082
.16256
.18796
.21336
.16510
.19050
.21590
.16764
.19304
.21844
.17018
.19558
.22098
.17272
.19812
.22352
.17526
.20066
.22606
0.009
0.010
0.011
.22860
.25400
.27940
.23114
.25654
.28194
.23368
.25908
.28448
.23622
.26162
.28702
.23876
.26416
.28956
.24130
.26670
.29210
.24384
.26924
.29464
.24638
.27178
.29718
.24892
.27432
.29972
.25146
.27686
.30226
0.012
0.013
0.014
.30480
.33020
.35560
.30734
.33274
.35814
.30988
.33528
.36068
.31242
.33782
.36322
.31496
.34036
.36576
.31750
34290
.36830
.32004
.34544
.37084
.32258
.34798
.37338
.32512
.35052
.37592
.32766
.35306
.37846
0.015
0.016
0.017
.38100
.40640
.43180
.38354
.40894
.43434
.38608
.41148
.43688
.38862
.41402
.43942
.39116
.41656
.44196
.39370
.41910
.44450
.39624
.42164
.44704
.39878
.42418
.44958
.40132
.42672
.45212
.40386
.42926
.45466
0.018
0.019
0.020
.45720
.48260
.50800
.45974
.48514
.51054
.46228
.48768
.51308
.46482
.49022
.51562
.46736
.49276
.51816
.46990
.49530
.52070
.47244
.49784
.52324
.47498
.50038
.52578
.47752
.50292
.52832
.48006
.50546
.53086
12
13
14
15
16
0.0001
R-2
CONVERSION OF SMALL mm TO INCH

mm
inches
mm
inches
mm
inches
0.01
0.02
0.03
0.04
0.05
0.06
0.07
0.08
0.09
0.00039
0.00079
0.00118
0.00157
0.00197
0.00236
0.00276
0.00315
0.00354
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
0.00394
0.00787
0.01181
0.01575
0.01969
0.02362
0.02756
0.03150
0.03543
1
2
3
4
5
6
7
8
9
0.03937
0.07874
0.11811
0.15748
0.19685
0.23622
0.27559
0.31496
0.35433
R
T
1
2
millimeters (mm)
mm
0.000
0.001
0.002
0.003
0.004
0.00
0.01
0.02
.00000
.00039
.00079
.00004
.00043
.00083
.00008
.00047
.00087
.00012
.00051
.00091
.00016
.00055
.00094
0.03
0.04
0.05
.00118
.00157
.00197
.00122
.00161
.00201
.00126
.00165
.00205
.00130
.00169
.00209
0.06
0.07
0.08
.00236
.00276
.00315
.00240
.00280
.00319
.00244
.00283
.00323
0.09
0.10
0.11
.00354
.00394
.00433
.00358
.00398
.00437
0.12
0.13
0.14
.00472
.00512
.00551
0.15
0.16
0.17
0.18
0.19
0.20
0.006
0.007
0.008
0.009
.00020
.00059
.00098
.00024
.00063
.00102
.00028
.00067
.00106
.00031
.00071
.00110
.00035
.00075
.00144
.00134
.00173
.00213
.00138
.00177
.00217
.00142
.00181
.00220
.00146
.00185
.00224
.00150
.00189
.00228
.00154
.00193
.00232
.00248
.00287
.00327
.00252
.00291
.00331
.00256
.00295
.00335
.00260
.00299
.00339
.00264
.00303
.00343
.00268
.00307
.00346
.00272
.00311
.00350
.00362
.00402
.00441
.00366
.00406
.00445
.00370
.00409
.00449
.00374
.00413
.00453
.00378
.00417
.00457
.00382
.00421
.00461
.00386
.00425
.00465
.00390
.00429
.00469
.00476
.00516
.00555
.00480
.00520
.00559
.00484
.00524
.00563
.00488
.00528
.00567
.00492
.00531
.00571
.00496
.00535
.00575
.00500
.00539
.00579
.00504
.00543
.00583
.00508
.00547
.00587
.00591
.00630
.00669
.00594
.00634
.00673
.00598
.00638
.00677
.00602
.00642
.00681
.00606
.00646
.00685
.00610
.00650
.00689
.00614
.00654
.00693
.00618
.00657
.00697
.00622
.00661
.00701
.00626
.00665
.00705
.00709
.00748
.00787
.00713
.00752
.00791
.00717
.00756
.00795
.00720
.00760
.00799
.00724
.00764
.00803
.00728
.00768
.00807
.00732
.00772
.00811
.00736
.00776
.00815
.00740
.00780
.00819
.00744
.00783
.00823
0.005
inches
3
4
5
6
7
8
9
10
11
12
13
14
15
R-3
16
MULTIPLERS FOR SI UNITS

TORQUE
Multiply By
T
1
dy cm
g cm
N m x 10-4
Nm
oz. in.
lb. in.
lb. ft.
To
Obtain
980.7
1000
107
7.062 x 104
1.130 x 108
1.356 x 107
dy cm
1.020 x 10-3
1.020
1.020 x 104
72.01
1.152 x 103
1.383 x 104
g cm
10
9.807 x 10
10
70.62
1.130 x 10
1.356 x 10
N m x 10-4
9.807 x 10-5
10-4
7.062 x 10-3
0.1130
1.356
Nm
1.416 x 10
8.850 x 10-7
7.375 x 10
-3
-1
10-7
2
3
-5
-8
1.389 x 10
-2
1.416 x 10
141.6
16
192
oz. in.
8.681 x 10-4
8.850 x 10-4
8.850
6.250 x 10-2
12
lb. in.
7.234 x 10
7.375 x 10
0.7375
5.208 x 10
8.333 x 10
lb. ft.
-2
-5
-5
-3
PREFIXES FOR SI UNITS

Multiple and Submultiple
1,000,000,000,000
1,000,000,000
1,000,000
1,000
100
10
0.1
0.01
0.001
0.000 001
0.000 000 001
0.000 000 000 001
0.000 000 000 000 001
0.000 000 000 000 000 001
5
6
7
9
10
Prefix
Symbol
tera
giga
mega
kilo
hecto
deka
deci
centi
milli
micro
nano
pico
femto
atto
T
G
M
k
h
da
d
c
m
m
n
p
f
a
= 1012
= 109
= 106
= 103
= 102
= 10
= 101
= 102
= 103
= 106
= 109
= 1012
= 1015
= 1018
Multiply By
oz. in. rpm
watts
hp
To
Obtain
1352
1.008 x 106
oz. in. rpm
7.345 x 10-4
745.7
watts
9.917 x 10
1.341 x 10
hp
-7
-3
INERTIA
11
12
Multiply By
g cm2
kg m2
oz. in. s2
oz. in.2
To
Obtain
107
7.062 x 104
182.9
g cm2
7.062 x 103
1.829 x 105
kg m2
1.416 x 10
141.6
2.590 x 10
oz. in. s2
5.467 x 103
5.467 x 104
386.09
oz. in.2
107
5
13
14
15
16
R-4
-2
GREEK ALPHABET
POWER
A
B
G
D
E
Z
H
Q
I
K
L
M
N
X
O
P
R
S
T
U
F
C
Y
W
a
b
g
d
e
z
h
q
i
k
l
m
n
x
o
p
r
V
t
u
f
c
y
w
Alpha
Beta
Gamma
Delta
Epsilon
Zeta
Eta
Theta
Iota
Kappa
Lambda
Mu
Nu
Xi
Omicron
Pi
Rho
Sigma
Tau
Upsilon
Phi
Chi
Psi
Omega
MISCELLANEOUS CONVERSION FACTORS

Quantity
Conventional
R
SI Unit
Conversion Factors
Inch Unit
Metric Unit
Length
Inch
in.
Meter
m
Metre
m
1 in. = 25.4 mm
1 mm = 0.03937 in.
1 m = 3.2808 ft.
1 ft. = 0.3048 m
Area
Square Inch
in.2
Square
Centimeter
cm2
Square Metre
m2
1 in.2 = 6.4516 cm2

1 cm2 = 0.155 in.2
1 m2 = 10.764 ft.2
1 ft.2 = 0.092903 m2
Pound Mass
lb.
Kilogram
Mass
kg
Kilogram
Mass
kg
1 lb. = 0.45359237 kg
1 kg = 2.2046 lb.
Pound Force
lbf
Kilogram
Force
kgf
Newton
N
1 lbf = 0.45359237 kgf

1 lbf = 4.44822 N
1 kgf = 2.2046 lbf
1 kgf = 9.80665 N
1 N = 0.1019716 kgf
1 N = 0.224809 lbf
Pascal
N/m2
(Pa)
1 MPa (megapascal) = 106 N/m2 = N/mm2

1 kPa (kilopascal) = 103 N/m2
1 lbf/in.2 = 0.070307 kgf/cm2
1 lbf/in.2 = 7.0307 10-4 kgf/mm2
1 lbf/in.2 = 6.8947 10-3 N/mm2 (MPa)
1 kgf/cm2 = 14.2233 lbf/in.2
1 kgf/cm2 = 9.80665 10-2 N/mm2 (MPa)
Mass
Force
Stress
Pressure
Torque
Work
Pounds Per
Square Inch
lbf/in.2
Inch Pounds
lbf in.
Kilogram
Per Square
Centimeter
kgf/cm2
Kilogram
Meters
kgf m
Newton
Metres
Nm
Power
Pound Feet
Per Minute
lbf ft./min.
Kilogram
Meters Per
Second
kgf m/s
Newton
Meters Per
Second
N m/s
Velocity
Feet
Per Second
ft./sec.
Meters
Per Second
m/sec.
Metres
Per Second
m/sec.
Acceleration
Feet
Per Second
Square
ft./sec.2
Meters
Per Second
Square
m/sec.2
Metres
Per Second
Square
m/sec.2
T
1
2
3
4
1 lbf in. = 1.1521 kgf cm

1 kgf cm = 0.8679 lbf in.
1 lbf in. = 0.1129848 N m
1 kgf m = 9.80665 N m
1 kgf cm = 9.80665 10-2 N m
1 N m = 8.85 lbf in.
1 N m = 10.19716 kgf cm
1 kW = 1000 N m/s
1 kW = 60,000 N m/min.
1 kW = 44,220 lbf ft./min.
1 kW = 1.34 hp
1 hp = 75 kgf m/s
1 hp = 44,741 N m/min.
1 hp = 33,000 lbf ft./min.
1 hp = 0.7457 kW
1 ft./sec. = 0.3048 m/sec.
1 in./sec. = 2.54 cm/sec.
1 ft./min. = 0.00508 m/sec.
1 mph = 0.44704 m/sec.
1 km/hr = 0.27777 m/sec.
1 mph = 1.609344 km/hr
5
6
7
8
9
10
11
12
13
1 ft./sec.2 = 0.3048 m/sec.2
14
15
R-5
16
MISCELLANEOUS CONVERSION FACTORS (CONT.)

1 inch
1 inch
1 foot
1 foot
1 foot
1 yard
1 yard
1 yard
1 yard
1 statute mile
1 statute mile
1 statute mile
25.400 millimeters (mm)

2.54 centimeters (cm)
12 inches (in.)
0.333 yards (yd.)
0.3048 meters (m)
36 inches (in.)
3 feet (ft.)
91.44 centimeters (cm)
0.9144 meters (m)
5280 feet (ft.)
1760 yards (yd.)
1.6093 kilometers (km)
1 millimeter
1 centimeter
1 inch
1 yard
1 meter
1 inch
1 foot
1 centimeter
1 meter
1 kilometer
1 kilometer
1 kilometer
0.03937 inches (in.)

0.3937 inches (in.)
0.08333 feet (ft.)
3 feet (ft.)
3.2808 feet (ft.)
0.02778 yards (yd.)
0.333 yards (yd.)
0.01094 yards (yd.)
1.0936 yards (yd.)
3281 feet (ft.)
1094 yards (yd.)
0.6214 statute mile
Area
1 sq. inch
1 sq. foot
1 sq. foot
1 sq. foot
1 sq. yard
1 sq. yard
6.4516 sq. centimeters

144 sq. inches
929.03 sq. centimeters
0.092903 sq. meters
9 sq. feet
0.83612 sq. meters
1 sq. centimeter
1 sq. inch
1 sq. centimeter
1 sq. meter
1 sq. foot
1 sq. meter
0.15500 sq. inch

0.00694 sq. feet
0.00108 sq. feet
10.764 sq. feet
0.1111 sq. yards
1.196 sq. yards
Volume
1 cu. inch
1 cu. inch
1 cu. inch
1 cu. inch
1 cu. inch
1 cu. foot
1 cu. foot
1 cu. foot
1 cu. foot
1 cu. yard
1 cu. yard
1 pint
1 quart
1 quart
1 quart
1 quart
1 quart
1 gallon
1 gallon
1 gallon
0.0005787 cu. feet

0.004329 gallons (gal.)
16.39 cu. centimeters
0.00001639 cu. meters
0.0164 liters (l)
1728 cu. inches
0.0283 cu. meters
28.32 liters (l)
27 cu. feet
0.76410 cu. meters
0.4732 liters (l)
2 pints (pt.)
0.25 gallons (gal.)
57.75 cu. inches
0.03342 cu. feet
0.9464 liters (l)
231 cu. inches
0.1337 cu. feet
3.785 liters (l)
1 cu. foot
1 gallon
1 cu. centimeter
1 cu. meter
1 liter
1 cu. inch
1 gallon
1 cu. meter
1 liter
1 cu. foot
1 cu. meter
1 liter
1 pint
1 gallon
1 cu. inch
1 cu. foot
1 liter
1 cu. inch
1 cu. foot
1 liter
1728 cu. inches

231 cu. inches
0.06102 cu. inches
61023 cu. inches
61.017 cu. inches
0.0005787 cu. feet
0.1337 cu. feet
35.31 cu. feet
0.03531 cu. feet
0.0370 cu. yards
1.30873 cu. yards
2.11327 pints (pt.)
0.50 quarts (qt.)
4 quarts (qt.)
0.017316 quarts (qt.)
29.9222 quarts (qt.)
1.057 quarts (qt.)
Weight
1 ounce
1 ounce
1 pound
1 pound
1 pound
28.35 grams (g)

0.02835 kilograms (kg)
16 ounces (oz.)
453.6 grams (g)
0.4536 kilograms (kg)
1 gram
1 kilogram
1 ounce
1 gram
1 kilogram
0.03527 ounces (oz.)

35.274 ounces (oz.)
0.0625 pounds (lb.)
0.002205 pounds (lb.)
2.2046 pounds (lb.)
1 pound/sq. inch
1 pound/sq. foot
1 pound/sq. yard
1 ounce/cu. inch
1 pound/cu. foot
0.070307 kg/sq. cm
4.8824 kilograms/sq. m
0.54249 kilograms/sq. m
1.7300 grams/cu. cm
16.019 kilograms/cu. m
1 kilogram/sq. cm
1 kilogram/sq. meter
1 kilogram/sq. meter
1 gram/cu. cm
1 kilogram/cu. meter
14.223 pounds/sq. in.

0.2048 pounds/sq. ft.
1.8433 pounds/sq. yd.
0.57803 ounce/cu. in.
0.062428 pounds/cu. ft.
T
Linear
1
2
3
4
5
6
7
8
9
10
11
12
Pressure
13
14
15
16
R-6

To Convert
Amperes/sq. cm
Amperes/sq. in.
Ampere-hours
Ampere-turns
Ampere-turns/cm
Ampere-turns/cm
Ampere-turns/in.
Ampere-turns/in.
Angstrom unit
Angstrom unit
Atmospheres
Atmospheres
Atmospheres
Atmospheres
Bars
Bars
Bars
Btu
Btu
Btu
Btu
Btu
Btu
Btu/hr.
Btu/hr.
Btu/hr.
Btu/hr.
Btu/min.
Btu/min.
Btu/min.
Btu/min.
Calories, gram (mean)
Candle/sq. in.
Centigrade
Centiliters
Centimeters
Centimeters
Centimeters
Centimeters
Centimeter-dynes
Centimeter-dynes
Centimeters/sec.
Centimeters/sec.2
Circular mils
Circular mils
Circular mils
Circumference
Coulombs
Coulombs/sq. cm
Coulombs/sq. in.
Cubic centimeters
Cubic centimeters
Cubic centimeters
Cubic centimeters
Cubic feet
Into
Multiply By
Amperes/sq. in.
6.452
Amperes/sq. cm
0.1550
Coulombs
3600
Gilberts
1.257
Ampere-turns/in.
2.540
Gilberts/cm
1.257
Ampere-turns/cm
0.3937
Gilberts/cm
0.4950
Inches
3937 x 10-9
Microns (mus)
10-4
Cms of mercury
76
Ft. of water (4C)
33.90
In. of mercury (0C)
29.92
Pounds/sq. in.
14.70
Atmospheres
0.9869
Dynes/sq. cm
106
Pounds/sq. in.
14.50
Ergs
1.0550 x 1010
Foot-pounds
778.3
Gram-calories
252
Horsepower-hrs.
3.931 x 10-4
Joules
1054.8
Kilowatt-hrs.
2.928 x 10-4
Foot-pounds/sec.
0.2162
Gram-cal./sec.
0.0700
Horsepower-hrs.
3.929 x 10-4
Watts
0.2931
Foot-pounds/sec.
12.96
Horsepower
0.02356
Kilowatts
0.01757
Watts
17.57
Btu (mean)
3.9685 x 10-3
Lamberts
0.4870
Fahrenheit
(C x 9/5) + 32
Liters
0.01
3.281 x 10-2
Feet
Meters
0.01
0.3937
Inches
10
Millimeters
1.020 x 10-3
Centimeter-grams
7.376 x 10-8
Pound-feet
0.03281
Feet/sec.
0.03281
Feet/sec.2
Sq. centimeters
5.067 x 10-6
Sq. mils
0.7854
Sq. inches
7.854 x 10-7
Radians
6.283
Faradays
1.036 x 10-5
Coulombs/sq. in.
64.52
Coulombs/sq. cm
0.1550
Cu. inches
0.06102
Gallons (U.S. liquid) 2.642 x 10-4
Liters
0.001
Quarts (U.S. liquid)
1.057 x 10-3
Cu. Inches
1728
To Convert
Cubic feet
Cubic feet
Cubic feet
Cubic feet
Cubic feet/min.
Cubic inches
Cubic inches
Cubic inches
Cubic inches
Cubic inches
Cubic meters
Cubic meters
Cubic meters
Days
Degrees/sec.
Degress/sec.
Degrees/sec.
Degrees (angle)
Degrees (angle)
Degrees (angle)
Dynes/cm
Dynes/sq. cm
Dynes/sq. cm
Dynes
Dynes
Dynes
Dynes
Dynes/sq. cm
Erg/sec.
Ergs
Ergs
Ergs
Ergs
Ergs
Ergs
Ergs
Ergs/sec.
Ergs/sec.
Ergs/sec.
Ergs/sec.
Farads
Faradays
Faradays
Feet
Feet
Feet
Feet of water
Feet of water
Feet of water
Feet of water
Feet/min.
Feet/min.
Feet/sec.
Feet/sec.2
Feet/sec.2
Into
Multiply By
Cu. meters
0.02832
Cu. yards
0.03704
Gallons (U.S. liq.)
7.48052
Liters
28.32
Cu. cms/sec.
472
Cu. centimeters
16.39
Cu. feet
5.787 x 10-4
Gallons (U.S. liq.)
4.329 x 10-3
Liters
0.01639
Quarts (U.S. liq.)
0.01732
Gallons (U.S. liq.)
264.2
Liters
1000
Pints (U.S. liq.)
2113
Seconds
86400
Radians/sec.
0.01745
Revolutions/min.
0.1667
Revolutions/sec.
2.778 x 10-3
Quadrants
0.01111
Radians
0.01745
Seconds
3600
Erg/sq. millimeter
0.01
Atmospheres
9.869 x 10-7
In. of mercury (0C) 2.953 x 10-5
Grams
1.020 x 10-3
Joules/cm
10-7
Joules/m (Newtons)
10-5
Pounds
2.248 x 10-6
Bars
10-6
Dyne-cm/sec.
1.0
Btu
9.480 x 10-11
1.0
Dyne-centimeters
7.367 x 10-8
Foot-pounds
Grams-calories
0.2389 x 10-7
Grams-cms
1.020 x 10-3
Joules
10-7
0.2778 x 10-10
Watt-hours
Btu/min.
5.688 x 10-9
7.3756 x 10-8
Foot-pounds/sec.
Horsepower
1.341 x 10-10
10-10
Kilowatts
106
Microfarads
26.80
Ampere-hours
Coulombs
9.649 x 104
Centimeters
30.48
Meters
0.3048
304.8
Millimeters
0.02950
Atmospheres
0.8826
Inches of mercury
Kilograms/sq. cm
0.03048
Pounds/sq. in.
0.4335
Centimeters/sec.
0.5080
Miles/hr.
0.01136
Centimeters/sec.
30.48
Meters/sec.2
0.3048
Miles/hs
0.6818
R
T
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
R-7
16

R
T
1
2
3
4
5
6
7
8
9
10
11
12
13
14
To Convert
Into
Multiply By
To Convert
Into
Multiply By
Foot-candles
Foot-pounds
Foot-pounds
Foot-pounds
Foot-pounds
Foot-pounds/min.
Foot-pounds/min.
Foot-pounds/min.
Foot-pounds/min.
Foot-pounds/min.
Foot-pounds/sec.
Foot-pounds/sec.
Foot-pounds/sec.
Gallons
Gallons
Gallons
Gallons of water
Gausses
Gausses
Gausses
Gilberts
Gilberts/cm
Gilberts/cm
Grams
Grams
Grams
Grams
Grams
Grams
Grams/cu. cm
Grams/cu. cm
Gram-calories
Gram-calories
Gram-calories
Gram-calories
Gram-calories
Gram-calories/sec.
Gram-centimeters
Gram-centimeters
Gram-centimeters
Henries
Horsepower
Horsepower
Horsepower
Horsepower
Horsepower
Horsepower-hrs.
Horsepower-hrs.
Horsepower-hrs.
Horsepower-hrs.
Horsepower-hrs.
Horsepower-hrs.
Hours
Inches
Inches
Inches
Inches of mercury
Inches of mercury
Lumens/sq. meter
Btu
Ergs
Gram-calories
Joules
Btu/min.
Foot-pounds/sec.
Horsepower
Kg-calories/min.
Kilowatts
Btu/min.
Horsepower
Kilowatts
Cu. feet
Cu. inches
Liters
Pounds of water
Lines/sq. in.
Webers/sq. cm
Webers/sq. in.
Ampere-turns
Ampere-turns/cm
Ampere-turns/in.
Dynes
Joules/cm
Kilograms
Milligrams
Ounces (avd.)
Pounds
Pounds/cu. ft.
Pounds/cu. in.
Btu
Ergs
Foot-pounds
Horsepower-hrs.
Watt-hrs.
Btu-hr.
Btu
Ergs
Joules
Millihenries
Btu/min.
Foot-pounds/min.
Foot-pounds/sec.
Kg-calories/min.
Watts
Btu
Ergs
Foot-pounds
Gram-calories
Joules
Kilowatt-hrs.
Weeks
Centimeters
Millimeters
Mils
Atmospheres
Feet of water
10.764
1.286 x 10-3
1.356 x 10-7
0.3238
1.356
1.286 x 10-3
0.01667
3.030 x 10-5
3.24 x 10-4
2.260 x 10-5
0.07717
1.818 x 10-3
1.356 x 10-3
0.1337
231
3.785
8.3453
6.452
10-8
6.452 x 10-8
0.7958
0.7958
2.021
980.7
9.807 x 10-5
0.001
1000
0.03527
2.205 x 10-3
62.43
0.03613
3.9683 x 10-3
4.1868 x 107
3.0880
1.5596 x 10-6
1.1630 x 10-3
14.286
9.297 x 10-8
980.7
9.807 x 10-5
1000
42.44
33000
550
10.68
745.7
2547
2.6845 x 1013
1.98 x 106
641190
2.684 x 106
0.7457
5.952 x 10-3
2.540
25.40
1000
0.03342
1.133
Inches of mercury
Joules
Joules
Joules
Joules
Joules
Kilograms
Kilograms
Kilograms
Kilograms/sq. cm
Kilogram-calories
Kilogram-calories
Kilogram-calories
Kilogram-calories
Kilolines
Kilometers
Kilometers
Kilometers/hr.
Kilometers/hr.
Kilometers/hr.2
Kilometers/hr.2
Kilometers/hr.2
Kilowatts
Kilowatts
Kilowatts
Kilowatts
Kilowatts
Kilowatt-hrs.
Kilowatt-hrs.
Kilowatt-hrs.
Kilowatt-hrs.
Kilowatt-hrs.
Lines/sq. cm
Lines/sq. in.
Lines/sq. in.
Liters
Liters
Liters
Liters
Lumens
Lumens
Lumens/sq. ft.
Lumens/sq. ft.
Maxwells
Maxwells
Megohms
Meters
Meters
Meters
Meters
Meters
Meters/min.
Meters/sec.
Meters/sec.
Meters/sec.
Meters/sec.2
Meters/sec.2
Meters/sec.2
Pounds/sq. in.
Btu
Ergs
Foot-pounds
Kilogram-calories
Watt-hrs.
Grams
Pounds
Tons (short)
Pounds/sq. in.
Btu
Foot-pounds
Joules
Kilowatt-hrs.
Maxwells
Meters
Miles
Feet/sec.
Miles/hr.
Centimeters/sec.2
Feet/sec.2
Miles/hr.2
Btu/min.
Foot-pounds/sec.
Horsepower
Kg-calories/min.
Watts
Btu
Foot-pounds
Gram-calories
Horsepower-hrs.
Joules
Gausses
Gausses
Webers/sq. in.
Cu. centimeters
Cu. feet
Cu. inches
Gallons (U.S. liq.)
Spher. candle power
Watts
Foot-candles
Lumens/sq. meter
Kilolines
Webers
Ohms
Centimeters
Feet
Inches
Kilometers
Yards
Feet/sec.
Feet/sec.
Kilometers/hr.
Miles/hr.
Feet/sec.2
Kilometers/hr.2
Miles/hr.2
0.4912
9480 x 10-4
107
0.7376
2.389 x 10-4
2.778 x 10-4
1000
2.205
1.102 x 10-3
14.22
3.968
3088
4186
1.163 x 10-3
1000
1000
0.6214
0.9113
0.6214
27.78
0.9113
0.6214
56.92
737.6
1.341
14.34
1000
3413
2.655 x 106
859850
1.341
3.6 x 106
1.0
0.1550
10-8
1000
0.03531
61.02
0. 2642
0.07958
0.001496
1.0
10.76
0.001
10-8
106
100
3.281
39.37
0.001
1.094
0.05468
3.281
3.6
2.237
3.281
3.6
2.237
15
16
R-8

To Convert
Into
Multiply By
To Convert
Into
Multiply By
Microfarads
Microhms
Microhms
Microns
Miles (statute)
Miles (statute)
Miles (statute)
Miles (statute)
Miles/hr.
Miles/hr.
Miles/hr.
Miles/h s
Miles/h s
Miles/h s
Millimicrons
Milligrams
Millihenries
Milliliters
Millimeters
Millimeters
Millimeters
Mils
Mils
Minutes (angles)
Minutes (angles)
Ohms
Ounces
Ounces
Ounces (fluid)
Ounces (fluid)
Pints (liquid)
Pints (liquid)
Pints (liquid)
Pints (liquid)
Pints (liquid)
Pints (liquid)
Poise
Pounds
Pounds
Pounds
Pounds
Pounds of water
Pounds of water
Pounds of water
Pound-feet
Pound-feet
Pound-feet
Pounds/cu. in.
Pounds/cu. in.
Pounds/sq. in.
Pounds/sq. in.
Pounds/sq. in.
Pounds/sq. in.
Quarts (liquid)
Quarts (liquid)
Radians
Radians/sec.
Radians/sec.2
Revolutions
Farads
Megohms
Ohms
Meters
Centimeters
Feet
Inches
Kilometers
Feet/min.
Feet/sec.
Meters/min.
Centimeters/sec.2
Feet/sec.2
Kilometers/h s
Meters
Grams
Henries
Liters
Centimeters
Inches
Mils
Centimeters
Inches
Degrees
Radians
Megohms
Grams
Pounds
Cu. inches
Liters
Cu. centimeters
Cu. feet
Cu. inches
Gallons
Liters
Quarts (liquid)
Grams/cm. sec.
Dynes
Grams
Kilograms
Ounces
Cu. feet
Cu. inches
Gallons
Centimeter-dynes
Centimeter-grams
Meter-kilograms
Grams/cu. cm
Pounds/cu. ft.
Atmospheres
Feet of water
Inches of mercury
Pounds/sq. ft.
Gallons
Liters
Degrees
Degrees/sec.
Revs./sec.2
Degrees
10-6
10-12
10-6
10-6
1.609 x 105
5280
6.336 x 104
1.609
88
1.467
26.82
44.70
1.467
1.609
10-9
0.001
0.001
0.001
0.1
0.03937
39.37
2.540 x 10-3
0.001
0.01667
2.909 x 10-4
10-6
28.349527
0.0625
1.805
0.02957
473.2
0.01671
28.87
0.125
0.4732
0.5
1.00
44.4823 x 104
453.5924
0.4536
16
0.01602
27.68
0.1198
1.356 x 107
13825
0.1383
27.68
1728
0.06804
2.307
2.036
144
0.25
0.9463
57.30
57.30
0.1592
360
Revolutions
Revolutions/min.
Revolutions/min.
Revolutions/min.2
Revolutions/min.2
Revolutions/sec.
Revolutions/sec.
Revolutions/sec.2
Seconds (angles)
Seconds (angles)
Slugs
Square centimeters
Square centimeters
Square centimeters
Square centimeters
Square feet
Square feet
Square feet
Square inches
Square inches
Square inches
Square inches
Square meters
Square meters
Square meters
Square meters
Square millimeters
Square millimeters
Square millimeters
Square mils
Square mils
Square mils
Temp. (C) + 273
Temp. (C) + 17.78
Temp. (F) + 460
Temp. (F) - 32
Tons (short)
Tons (short)
Volts/inch
Watts
Watts
Watts
Watts
Watts
Watts
Watts
Watt-hours
Watt-hours
Watt-hours
Watt-hours
Watt-hours
Watt-hours
Watt-hours
Webers
Webers
Webers/sq. in.
Webers/sq. in.
Webers/sq. in.
Yards
Radians
Degrees/sec.
Radians/sec.
Radians/sec.2
Revolutions/sec.2
Degrees/sec.
Radians/sec.
Radians/sec.2
Degrees
Minutes
Pounds
Circular mils
Sq. inches
Sq. meters
Sq. millimeters
Circular mils
Sq. centimeters
Sq. inches
Circular mils
Sq. centimeters
Sq. millimeters
Sq. mils
Sq. centimeters
Sq. feet
Sq. inches
Sq. millimeters
Circular mils
Sq. centimeters
Sq. inches
Circular mils
Sq. centimeters
Sq. inches
Absolute temp. (C)
Temperature (F)
Absolute temp. (F)
Temperature (C)
Ounces
Pounds
Volts/cm
Btu/hr.
Btu/min.
Ergs/sec.
Foot-pounds/sec.
Horsepower
Kg-calories/min.
Kilowatts
Btu
Ergs
Foot-pounds
Gram-calories
Horsepower-hrs.
Kilogram-calories
Kilowatt-hrs.
Maxwells
Kilolines
Gausses
Lines/sq. in.
Webers/sq. cm
Meters
6.283
6
0.1047
1.745 x 10-3
2.778 x 10-4
360
6.283
6.283
2.778 x 10-4
0.01667
32.17
1.973 x 105
0.1550
0.0001
100
1.833 x 108
929
144
1.273 x 106
6.452
645.2
106
104
10.76
1550
106
1973
0.01
1.550 x 10-3
1.273
6.452 x 10-6
10-6
1.0
1.8
1.0
5/9
32000
2000
0.39370
3.4129
0.05688
107
0.7378
1.341 x 10-3
0.01433
0.001
3.413
3.60 x 1010
2656
859.85
1.341 x 10-3
0.8605
0.001
108
105
1.550 x 107
108
0.1550
0.9144
R
T
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
R-9
16
FORMULAS OF : ENERGY, INERTIA, TORQUE, POWER & WORK

R
T
1
2
3
4
5
6
Many components such as clutches, brakes, couplings, drive belts, etc. are used in applications
where starting, stopping or reversing of a load is involved. Factors and formulas needed to establish
the power requirements are given here.
Kinetic Energy of Rotation
Starting from basic equation
E=
8
9
m is mass =
V is velocity in
W
G
is slugs i.e.
lb. sec.2
ft.
ft.
sec.
W = weight in lbs
G = gravitational acceleration in ft./sec.2
(G = 32.2 ft./sec.2 = 386 in./sec.2)
If we assume that the entire mass is concentrated at the radius of gyration k, then we can substitute
V=
2kN
ft. where N is in rpm; k is in feet
...
sec.
60
Substituting values for V and G in the basic equation, we obtain

Wk2 . N2
=
G
182.5
Wk2N2
5878
...... ft. lb.
(2)
Inertia
In simple terms, Inertia is the property of a body at rest to stay at rest, or in motion to remain in motion.
Expression
Wk2
= IG is known as mass moment of inertia and is given in ft. lb. sec.2
G
Often, expression Wk2 = I in lb. ft.2 is used as "moment of inertia in weight units".
It is proportional to IG and its proportionality factor G = 32.2 is often lumped with other constants.
10
11
12
13
14
15
16
(1)
where
E=
mV2
...... ft. lb.
2
R-10

Table below tabulates the values of Wk2 for commonly used cross sections.
Radius Of
Gyration
Part
K2
(Feet2)
K (Feet)
W (Weight In lb.)
w = Density Of
Material In
(lb. ft. )
1.360wLD2
170.4wLD4
lb./cu. in.
I = wk2
2
WK2
G
5.279wLD4
IG =
(lb. ft. sec.2)
Circular Cylinder
r2
2
K2 =
0.354 D
Hollow Circular
Cylinder
0.354 D22 + D12
K2 =
r1 + r2
2
2
1.360wL(D22 - D12)
170.4wL(D24 - D14) 5.279wL(D24 - D14)
Table compiled based on References 1 and 2.

Nomographs on subsequent pages facilitate conversion of different units of inertia.
A table shows actual inertia values for discs of different diameters.
Equivalent Inertia
Must be considered when inertia has to be reflected to a shaft which rotates at a different speed.
( )
N2
N1
(I2)EQ at 1 = I2
(7)
I1N1
Example: Inertia at the clutch output:
ICL = I1 + I2
Input
Clutch
I2N2
I3N3
( ) ( )
N2
N1
+ I3
N3
N1
Torque
If a body of inertia IG is accelerated at a constant angular acceleration (radians/sec.2), the necessary
constant torque is

9
(3)
T = IG ...... lb. ft.
If the acceleration speeds up the load N (rpm) within t (seconds), then the angular acceleration
can be expressed as:
=

=
t
2N
..... rad/sec.2
60t
T=
Wk2 2N
=
60t
32.2
10
11
(4)
12
where is the change of angular velocity in radians/sec.

Substitution into (3) yields

13
Wk2N
..... ft. lb.
308t
(5)
14
15
R-11
16

R
T
Work and Power

Work is the product of the magnitude of a force and the distance over which the force is applied.
Power is the time rate at which the work is performed. Unit of power is

r (ft.)
1 hp = 550 ft. lb./sec. = 33,000 ft. lb./min.
Hence,
hp = P 2rN =
33,000
P r N = T N .....
5252
5252
N (rpm)
(6)
P (lb.)
2
3
4
5
6
HORSEPOWER equals
T N
5252
T N
63024
WATTS equals
When T given in
= 1.9 T N 10-4
TN
7.043
= 0.142 T N
ft. lb.
= 1.586 T N 10-5
TN
84.51
= 1.183 T N 10-2
in. lb.
T N 10-5 = 0.0992 T N 10-5

10.08
TN
1.351
10-3 = 0.739 T N 10-3
in. oz.
REFERENCES:

1. "The Significance of WK2 and How to Calculate It", Product Engineering
June 27, 1960 page 39

2. ASME Handbook, Engineering Tables, McGraw Hill Co., 1956

3. "Calculating Mass Moments of Inertia" Product Engineering, Jan. 1956 page 215
50
Power, Watts
9
10
11
40
30
20
10
12
1000
13
2000
3000
4000
POWER AS FUNCTION OF T AND N
14
15
16
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
60
R-12
Torque, in. oz.
5000 rpm
N = rpm
Since torque T = P r. The following table can be constructed. (Note that 1hp = 745.7 watts.)
INERTIA OF ROUND DISCS

To determine WR2 of a shaft or disc, multiply numbers given in the table by the length of shaft or thickness
of disc in inches.
For hollow shafts or rings, subtract WR2 of the I.D. from the WR2 of the O.D., and then multiply by length or
thickness in inches.
Per Inch of Length or Thickness

Dia. (in.)
3/4
1
1-1/4
1-1/2
1-3/4
2
2-1/4
2-1/2
2-3/4
3
3-1/2
3-3/4
4
4-1/4
4-1/2
5
5-1/2
6
6-1/4
6-1/2
6-3/4
7
7-1/4
7-1/2
7-3/4
8
8-1/4
8-1/2
8-3/4
9
9-1/4
9-1/2
9-3/4
10
10-1/4
10-1/2
WR (lb. x ft. )
.00006
.0002
.0005
.001
.002
.003
.005
.008
.011
.016
.029
.038
.049
.063
.079
.120
.177
.250
.296
.345
.402
.464
.535
.611
.699
.791
.895
1
1.13
1.27
1.41
1.55
1.75
1.93
2.13
2.35
2
Dia. (in.)
10-3/4
11
11-1/4
11-1/2
11-3/4
12
12-1/4
12-1/2
12-3/4
13
13-1/4
13-1/2
13-3/4
14
14-1/4
14-1/2
14-3/4
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
WR2 (lb. x ft.2)

2.58
2.83
3.09
3.38
3.68
4
4.35
4.72
5.11
5.58
5.96
6.42
6.91
7.42
7.97
8.54
9.15
9.75
12.61
16.07
20.21
25.08
30.79
37.43
45.09
53.87
63.86
75.19
87.96
102.3
118.31
136.14
155.92
177.77
201.8
228.2
Dia. (in.)
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
66
72
78
84
90
96
102
WR2 (lb. x ft.2)

257.2
288.8
323.2
360.7
401.3
445.3
492.8
543.9
598.8
658.1
721.4
789.3
861.8
939.3
1021.8
1109.6
1203.1
1302.2
1407.4
1518.8
1636.7
1761.4
1893.1
2031.9
2178.3
2332.5
2494.7
3652.5
5172
7125
9584
12629
16349
20836
Horsepower
Equals
BTU/min.
ft. lbs/min.
ft. lbs/sec.
kilowatts
watts
Kilowatt
Equals
2
3
4
5
6
7
8
9
10
11
Power Conversion Equivalents

42.44
33.000
550.00
0.7457
745.7
56.92
44,260
737.6
1.341
1000
BTU/min.
ft. lbs/min.
ft. lbs/sec.
horsepower
watts
12
13
14
15
R-13
16
INERTIA CONVERSION TABLE


lb ft2
lb ft s2
or
slug ft2
lb in2
lb in s2
oz in2
lb. ft.2
3.108 x
10-2
144
.373
2.304 x
103
5.968
421.40
0.4297
4.214 x
105
429.71
lb. ft. s2
32.174
4.633 x
103
12
7.413 x
104
192
1.356 x
104
13.825
1.356 x
107
1.383 x
104
lb. in.2
6.944 x
10-3
2.158 x
10-4
2.590 x
10-3
16
4.144 x
10-2
2.926
2.984 x
10-3
2.926 x
103
2.984
lb. in. s2
2.681
8.333 x
10-2
386.1
6.177 x
103
16
1.130 x
103
1.152
1.130 x
106
1.152 x
103
oz. in.2
4.34 x
10-4
1.349 x
10-5
6.25 x
10-2
1.619 x
10-4
2.59 x
10-3
0.183
1.865 x
10-4
182.901
0.186
oz. in. s2
0.168
5.208 x
10-3
24.13
6.25 x
10-2
386.088
70.616
7.201 x
10-2
7.0616 x
104
72.008
kg cm2
2.373 x
10-3
7.376 x
10-5
0.3417
8.851 x
10-4
5.467
1.416 x
10-2
1.0197 x
10-3
1000
1.0197
kg cm s2
2.327
7.233 x
10-2
335.109
0.8679
5.362 x
103
13.887
980.665
9.807 x
105
1000
g cm2
2.373 x
10-6
7.376 x
10-8
3.417 x
10-4
8.851 x
10-7
5.467 x
10-3
1.416 x
10-5
10-3
1.0197 x
10-6
1.0197 x
10-3
g cm s2
2.327 x
10-3
7.233 x
10-5
0.3351
8.680 x
10-4
5.362
1.389 x
10-2
.9807
10-3
980.667
T
1
2
3
4
5
6
oz in s2 kg cm2 kg cms2 g cm2 g cm s2
NOTE: To convert from A to B multiply by entry in table.
Example: Convert a rotor inertia of 90 g cm2 to oz. in. sec.2

The multiplier from the table above is 1.416 x 10-5
The new inertia = 90 x 1.416 x 10-5 = 1.27 x 103 oz. in. sec.2
9
10
11
12
13
14
15
16
R-14
COMPOSITE OF INCH AND METRIC DRILL SIZES

Drill Designation
Inch Series
Metric
Number
or Letter Fraction Series
Size
80
79
78
77
76
75
74
73
72
71
70
69
68
67
66
65
64
63
62
61
60
59
58
57
56
55
54
53
Size
Drill Designation
Inch Series
Size
Drill Designation
Inch Series
Inches
Dec.
Equiv.
mm
Metric
Number
Size
Inches
Dec.
Equiv.
mm
Metric
Number
Size
1/16
1.60
1.65
1.70
.0625
.0630
.0635
.0650
.0669
1.587
1.600
1.613
1.650
1.700
9/64
1.75
1.80
1.85
.0670
.0689
.0700
.0709
.0728
1.702
1.750
1.778
1.800
1.850
5/64
1.90
1.95
.0730
.0748
.0760
.0768
.0781
1.854
1.900
1.930
1.950
1.984
2.00
2.05
.0785
.0787
.0807
.0810
.0820
1.994
2.000
2.050
2.057
2.083
2.10
2.15
2.20
2.25
.0827
.0846
.0860
.0866
.0886
2.100
2.150
2.184
2.200
2.250
19
3/32
2.30
2.35
.0890
.0906
.0925
.0935
.0937
2.261
2.300
2.350
2.375
2.380
17
2.40
2.45
2.50
.0945
.0960
.0965
.0980
.0984
2.400
2.438
2.450
2.489
2.500
2.60
2.70
.0995
.1015
.1024
.1040
.1063
2.527
2.578
2.600
2.642
2.700
7/64
2.75
2.80
.1065
.1083
.1094
.1100
.1102
2.705
2.750
2.779
2.794
2.800
2.90
3.00
.1110
.1130
.1142
.1160
.1181
2.819
2.870
2.900
2.946
3.000
1/8
3.10
3.20
3.25
.1200
.1220
.1250
.1260
.1280
3.048
3.100
3.175
3.200
3.250
3.30
3.40
.1285
.1299
.1339
.1360
3.264
3.300
3.400
3.454
1/64
0.35
0.40
.0135
.0138
.0145
.0156
.0158
0.343
0.350
0.368
0.396
0.400
0.45
0.50
.0160
.0177
.0180
.0197
.0200
0.406
0.450
0.457
0.500
0.508
51
0.52
0.55
0.58
.0205
.0210
.0217
.0225
.0228
0.520
0.533
0.550
0.572
0.580
49
0.60
0.62
0.65
.0236
.0240
.0244
.0250
.0256
0.600
0.610
0.620
0.635
0.650
47
0.70
0.75
.0260
.0276
.0280
.0292
.0295
0.660
0.700
0.711
0.742
0.750
1/32
0.80
.0310
.0312
.0315
.0320
.0330
0.787
0.792
0.800
0.813
0.838
0.85
0.90
.0335
.0350
.0354
.0360
.0370
0.850
0.889
0.900
0.914
0.940
0.95
1.00
.0374
.0380
.0390
.0394
.0400
0.950
0.965
0.991
1.000
1.016
39
38
1.05
1.10
.0410
.0413
.0420
.0430
.0433
1.041
1.050
1.069
1.092
1.100
36
3/64
1.15
1.20
1.25
.0453
.0465
.0469
.0472
.0492
1.150
1.181
1.191
1.200
1.250
34
33
1.30
1.35
1.40
.0512
.0520
.0531
.0550
.0551
1.300
1.321
1.350
1.397
1.400
31
1.45
1.50
1.55
.0571
.0591
.0595
.0610
1.450
1.500
1.511
1.550
30
52
50
48
46
45
44
43
42
41
40
37
35
32
29
28
27
26
25
24
23
22
21
20
18
16
15
14
13
12
11
10
9
8
7
6
Size
Inches
Dec.
Equiv.
mm
3.50
3.60
.1378
.1405
.1406
.1417
.1440
3.500
3.569
3.571
3.600
3.658
3.70
3.75
3.80
.1457
.1470
.1476
.1495
.1496
3.700
3.734
3.750
3.797
3.800
5/32
3.90
.1520
.1535
.1540
.1562
.1570
3.861
3.900
3.912
3.967
3.988
4.00
4.10
4.20
.1575
.1590
.1610
.1614
.1654
4.000
4.039
4.089
4.100
4.200
11/64
4.25
4.30
.1660
.1673
.1693
.1695
.1719
4.216
4.250
4.300
4.305
4.366
4.40
4.50
.1730
.1732
.1770
.1772
.1800
4.394
4.400
4.496
4.500
4.572
4.60
4.70
4.75
.1811
.1820
.1850
.1850
.1870
4.600
4.623
4.700
4.700
4.750
3/16
4.80
4.90
.1875
.1890
.1890
.1910
.1929
4.762
4.800
4.800
4.851
4.900
5.00
5.05
.1935
.1960
.1968
.1990
.2000
4.915
4.978
5.000
5.050
5.080
10
13/64
5.10
5.20
.2008
.2010
.2031
.2040
.2047
5.100
5.105
5.159
5.182
5.200
11
5.25
5.30
5.40
.2055
.2067
.2087
.2090
.2126
5.220
5.250
5.300
5.309
5.400
7/32
5.50
5.60
.2130
.2165
.2187
.2205
5.410
5.500
5.555
5.600
T
1
4
5
6
7
8
9
12
13
14
15
R-15
16
COMPOSITE OF INCH AND METRIC DRILL SIZES

R
T
Drill Designation
Inch Series
Metric
Number
Size
2
3
4
mm
Metric
Number
Size
Inches
Dec.
Equiv.
mm
11/32
8.70
8.75
8.80
.3390
.3425
.3437
.3445
.3165
8.611
8.700
8.730
8.750
8.800
37/64
19/32
14.75
15.00
15.25
.5781
.5807
.5906
.5937
.6004
14.684
14.750
15.000
15.080
15.250
15/64
5.90
6.00
.2323
.2340
.2344
.2362
.2380
5.900
5.944
5.954
6.000
6.045
8.90
9.00
9.10
.3480
.3504
.3543
.3580
.3583
8.839
8.900
9.000
9.093
9.100
39/64
5/8
15.50
15.75
16.00
.6094
.6102
.6201
.6250
.6299
15.479
15.500
15.750
15.875
16.000
6.10
6.20
6.25
.2402
.2420
.2441
.2460
.2461
6.100
6.147
6.200
6.248
6.250
23/64
9.20
9.25
9.30
.3594
.3622
.3642
.3661
.3680
9.129
9.200
9.250
9.300
9.347
41/64
21/32
16.25
16.50
16.75
.6398
.6406
.6496
.6562
.6595
16.250
16.271
16.500
16.667
16.750
1/4
6.30
6.40
6.50
.2480
.2500
.2520
.2559
.2570
6.300
6.350
6.400
6.500
6.528
3/8
9.40
9.50
9.60
.3701
.3740
.3750
.3770
.3780
9.400
9.500
9.525
9.576
9.600
43/64
11/16
17.00
17.25
17.50
.6693
.6719
.6791
.6875
.6890
17.000
17.066
17.250
17.462
17.500
17/64
6.60
6.70
6.75
.2598
.2610
.2638
.2656
.2657
6.600
6.629
6.700
6.746
6.750
9.70
9.75
9.80
9.90
.3819
.3839
.3858
.3860
.3898
9.700
9.750
9.800
9.804
9.900
45/64
23/32
17.75
18.00
18.25
.6988
.7031
.7087
.7185
.7187
17.750
17.859
18.000
18.250
18.255
6.80
6.90
7.00
.2660
.2677
.2717
.2720
.2756
6.756
6.800
6.900
6.909
7.000
25/64
10.00
10.10
10.25
.3906
.3937
.3970
.3976
.4035
9.921
10.000
10.084
10.100
10.250
47/64
3/4
18.50
18.75
19.00
.7283
.7344
.7382
.7480
.7500
18.500
18.654
18.750
19.000
19.050
9/32
7.10
7.20
.2770
.2795
.2810
.2812
.2835
7.036
7.100
7.137
7.142
7.200
13/32
27/64
10.50
.4040
.4062
.4130
.4134
.4219
10.262
10.317
10.490
10.500
10.716
49/64
25/32
19.25
19.50
19.75
.7579
.7656
.7677
.7776
.7812
19.250
19.446
19.500
19.750
19.842
7.25
7.30
7.40
.2854
.2874
.2900
.2913
.2950
7.250
7.300
7.366
7.400
7.493
7/16
10.75
11.00
11.25
11.50
.4232
.4331
.4375
.4429
.4528
10.750
11.000
11.112
11.250
11.500
51/64
13/16
20.00
20.50
21.00
.7874
.7969
.8071
.8125
.8268
20.000
20.241
20.500
20.637
21.000
19/64
7.50
7.60
7.70
.2953
.2969
.2992
.3020
.3031
7.500
7.541
7.600
7.671
7.700
29/64
15/32
11.75
12.00
12.25
.4531
.4626
.4687
.4724
.4823
11.509
11.750
11.905
12.000
12.250
53/64
27/32
55/64
21.50
22.00
.8281
.8437
.8465
.8594
.8661
21.034
21.430
21.500
21.829
22.000
5/16
7.75
7.80
7.90
8.00
.3051
.3071
.3110
.3125
.3150
7.750
7.800
7.900
7.937
8.000
31/64
1/2
12.50
12.75
13.00
.4844
.4921
.5000
.5020
.5118
12.304
12.500
12.700
12.750
13.000
7/8
57/64
29/32
22.50
23.00
.8750
.8858
.8906
.9055
.9062
22.225
22.500
22.621
23.000
23.017
8.10
8.20
8.25
.3160
.3189
.3228
.3230
.3248
8.026
8.100
8.200
8.204
8.250
33/64
17/32
13.25
13.50
13.75
.5156
.5217
.5312
.5315
.5413
13.096
13.250
13.492
13.500
13.750
59/64
15/16
61/64
23.50
24.00
.9219
.9250
.9375
.9449
.9531
23.416
23.500
23.812
24.000
24.209
21/64
8.30
8.40
8.50
8.60
.3268
.3281
.3307
.3320
.3346
.3386
8.300
8.334
8.400
8.433
8.500
8.600
35/64
9/16
14.00
14.25
14.50
.5469
.5512
.5610
.5625
.5709
13.891
14.000
14.250
14.287
14.500
31/32
63/64
1
24.50
25.00
25.40
.9646
.9687
.9843
.9844
1.0000
24.500
24.605
25.000
25.004
25.400
A
B
C
D
10
11
O
P
14
15
16
Inches
Dec.
Equiv.
13
Metric
Number
Size
Size
5.613
5.700
5.750
5.791
5.800
12
mm
Drill Designation
Inch Series
.2210
.2244
.2264
.2280
.2283
Inches
Dec.
Equiv.
Size
5.70
5.75
5.80
Drill Designation
Inch Series
Size
R-16
Y
Z
R-17
1/4"
.250
10
.190
8
.164
6
.138
4
.112
3
.099
2
.086
1
.073
0
.060
20
28
24
32
32
36
32
40
40
48
48
56
56
64
64
72
80
Screw
Size Thds.
&
Per
Thread Inch
Dia.
Dec.
.046
.059
.070
.078
.082
.089
.093
.106
.113
.136
.149
.159
.201
.213
3/64
53
50
5/64
45
43
42
36
33
29
25
21
7
3
Tap
Drill
No.
Tap
Drill
or
Bore
Thd
Dia
No.
48
3/32
7/64
1/8
9/64
11/64
13/64
7/32
19/64
Dec.
.070
.089
.104
.120
.136
.161
.189
.213
.281
50
43
37
31
29
20
12
13
9/32
Flats
Points H
3/16
3/16
7/32
1/4
9/32
5/16
3/8
1/2
5/32
3/16
3/16
7/32
9/32
5/16
11/32
7/16
.093
.109
.125
.140
.171
.203
.218
.296
11/16
17/32
1/2
3/8
3/8
9/32
9/32
9/32
.123
.116
.150
.142
.176
.168
.204
.195
.267
.256
.255
.245
.317
.306
.381
.370
.406
.395
.506
.494
.066
.057
.066
.057
.098
.087
.114
.102
.130
.117
.130
.117
.193
.178
.217
.205
.217
.205
.289
.275
.361
.344
.397
.378
.433
.413
.505
.482
.187
.180
.187
.180
.250
.241
.312
.302
.343
.332
.375
.362
.437
.423
.109
.102
.050
.043
.180
.171
.156
.150
.230
.220
.050
.043
.180
.171
I.D.
O.D.
O.D.
I.D.
H
.225
.215
.265
.255
.288
.278
.336
.325
.381
.370
.478
.466
.015
.020
.020
.022
.025
.185
.175
O.D.
.013
.500
.062
.493
.025
.267
.256
.437
.047
.337
.022
.204
.195
.375
.040
.296
.020
.176
.168
.375
.031
.253
.018
.150
.142
.312
.025
.212
.015
.123
.116
.250
.025
.198
.015
.109
.102
.250
.020
.175
.013
.250
.020
.150
.095
.089
.187
.020
.137
O.D.
O.D.
Split
Washer
O.D.
I.D.
Internal Washer
Fastening Accessories
External Washer
O.D.
I.D.
.156
.150
Machine
Split
Plain
Nuts
Lock
Washer
Washer
Flats Pts.
H
1/8
No.
Washer
Counterbore
or Spotface Dia.
.076
Dec.
Sheet
Metal
No.
Machined
Part
Clearance Drill
2 x Thd Dia
3 x Thd Dia
Counterbore
1 1/2 x Thd Dia

Clearance Hole
0
1
2
3
4
6
8
10
1/4"
.025
.032
.032
.032
.032
.032
.032
.062
.062
.078
.099
.099
.105
.125
.149
.174
.203
.265
Screw
Size
H
I.D.
Plain
Washer
O.D.
I.D.
STANDARDS FOR INCH SIZE FASTENERS
R
T
1
10
11
12
13
14
15
16
SCREW HEAD DIMENSIONS

R
T
Fillister
Head
C B
9
10
11
12
13
Pan Head
(Binding)
Truss Head
C
A
Flat Head
C
80
A
A
B
100
A
A
B
C
80
A
A
B
B
C
C
A
14
15
16
C
B
Flat Head
Oval Head
B
C
Hex Head
C
B
Hex
Socket
Head
B
C
3
4
Round
Head
Screw Size
Screw
Head Type
R-18
C
B
A
B
max.
min.
max.
min.
max.
min.
max.
min.
max.
min.
max.
min.
max.
min.
max.
min.
max.
min.
max.
min.
max.
min.
max.
min.
max.
min.
max.
min.
max.
min.
max.
min.
max.
min.
max.
min.
max.
min.
max.
min.
max.
min.
max.
min.
max.
min.
max.
min.
max.
min.
max.
min.
10
1/4"
5/16"
3/8"
.140
.124
.083
.070
.062
.055
.162
.146
.069
.059
.031
.023
.167
.155
.053
.045
.031
.023
.194
.180
.053
.044
.031
.023
.172
.156
.051
.040
.031
.023
.172
.156
.036
.029
.031
.023
.172
.156
.051
.040
.080
.063
.125
.120
.144
.134
.050
.040
.140
.136
.086
.083
.183
.166
.107
.094
.079
.072
.211
.193
.086
.075
.039
.031
.219
.205
.068
.058
.039
.031
.257
.241
.069
.059
.039
.031
.225
.207
.067
.055
.039
.031
.225
.207
.048
.040
.039
.031
.225
.207
.067
.055
.104
.084
.187
.181
.217
.205
.060
.049
.183
.178
.112
.109
.226
.208
.132
.118
.096
.089
.260
.240
.103
.091
.048
.039
.270
.256
.082
.072
.048
.039
.321
.303
.086
.074
.048
.039
.279
.257
.083
.069
.048
.039
.279
.257
.060
.051
.048
.039
.279
.257
.083
.069
.128
.105
.250
.244
.289
.275
.080
.067
.226
.221
.138
.134
.270
.250
.156
.141
.113
.106
.309
.287
.120
.107
.054
.045
.322
.306
.096
.085
.054
.045
.384
.364
.102
.088
.054
.045
.332
.308
.100
.084
.054
.045
.332
.308
.072
.062
.054
.045
.332
.308
.100
.084
.152
.126
.250
.244
.289
.275
.110
.096
.270
.265
.164
.160
.313
.292
.180
.165
.130
.123
.359
.334
.137
.123
.060
.050
.373
.357
.110
.099
.060
.050
.448
.425
.118
.103
.060
.050
.385
.359
.116
.098
.060
.050
.385
.359
.083
.072
.060
.050
.385
.359
.116
.098
.176
.148
.312
.305
.361
.344
.120
.105
.312
.306
.190
.185
.414
.389
.237
.219
.170
.161
.472
.443
.175
.160
.075
.064
.492
.473
.144
.130
.075
.064
.573
.546
.150
.133
.075
.064
.507
.477
.153
.131
.075
.064
.507
.477
.110
.097
.075
.064
.507
.477
.153
.131
.232
.187
.375
.367
.433
.413
.190
.172
.375
.367
.250
.244
.518
.490
.295
.276
.211
.201
.590
.557
.216
.198
.084
.072
.615
.594
.178
.162
.084
.072
.698
.668
.183
.162
.084
.072
.635
.600
.191
.165
.084
.072
.635
.600
.138
.123
.084
.072
.635
.600
.191
.165
.290
.249
.500
.491
.577
.557
.230
.208
.468
.457
.312
.306
.622
.590
.355
.333
.253
.242
.708
.670
.256
.237
.094
.081
.740
.716
.212
.195
.094
.081
.823
.787
.215
.191
.094
.081
.762
.722
.230
.200
.094
.081
.762
.722
.165
.148
.094
.081
.762
.722
.230
.200
.347
.300
.562
.552
.650
.621
.295
.270
.562
.553
.375
.368
METRIC THREAD SPECIFICATIONS

INTERNAL THREAD
P/8
H/8
H1
P/4
h3
30
H/2
60
P/2
H/2
d
H/4
EXTERNAL THREAD
d2
H/6
d3
D
D1
90
AXIS OF SCREW THREAD

H = 0.86603P
h3 = 0.61343P
H1 = 0.54127P
r =
H
6
= 0.14434P
d2 = d - 0.64953P (Effective Pitch Diameter)
D1 = d - 2H1 (Minor Diameter Internal)

d3 = d - 2h3 (Minor Diameter External)
D = (Major Diameter)
P
Pitch
mm
Threads
Per
Inch
Tap
Drill
Basic
Pitch
Diameter
M1
M1.6
M2
M2.5
M3
M3.5
M4
M5
M6
M8
M10
0.25
0.35
0.4
0.45
0.5
0.6
0.7
0.8
1
1.25
1.5
101.6
72.6
63.5
56.5
50.8
42.3
36.3
31.8
25.4
20.3
16.9
0.75
1.25
1.6
2.05
2.5
2.9
3.3
4.2
5
6.75
8.5
0.83762
1.37267
1.74019
2.20772
2.67524
3.11029
3.54534
4.01286
5.35048
7.18810
9.02572
mm
Minor Diameter Limits
d2
d
Basic Thread
Designation
d3 External
Min.
0.622
1.063
1.394
1.825
2.256
2.615
2.979
3.842
4.563
6.230
7.888
Max.
0.693
1.151
1.430
1.928
2.367
2.743
3.119
3.995
4.747
6.438
8.128
D1 Internal
Min.
0.729
1.221
1.567
2.013
2.453
2.850
3.242
4.134
4.917
6.647
8.376
Max.
0.785
1.321
1.679
2.138
2.599
3.010
3.422
4.334
5.153
6.912
8.676
9
10
11
NOTE: Above limits are based on DIN 13 Sheet 13 for medium tolerance class.
12
For external threads:

M1 Tolerance 6h
M1.6 and up Tolerance 6g
13
For internal threads:

M1 Tolerance 5H
M1.6 and up Tolerance 6H
14
15
R-19
16
DESIGNING A MINIATURE BELT DRIVE

R
T
1
2
3
Step 1.
Determine the peak torque for your drive. This is usually the
motor starting torque, but may also be any unusual
momentary or shock load which may occur during normal
operation.
Step 6.
Using Formula 6 in Table 1, calculate the effective tension

(Te) on the drive using the pitch radius and design torque
of the smallest loaded pulley in the system.
Step 7.
Step 2.
Determine the largest pulley diameters that can be utilized,

considering the space limitations and drive ratio of your
system. This helps to increase the torque capacity of the
drive and extend the service life of the belt.
Step 3.
Calculate the teeth in mesh (T.I.M.) using Formula 5 in Table

1. Consult Table 2 for the teeth in mesh factor. Divide the
peak torque (from Step 1) by the T.I.M. factor to determine the design torque by using Formula 7 in Table 1.
(a) Select the strength factor for your application from Table
3. Divide the effective tension from Step 6 by the strength
factor to determine the required break strength for the belt
design. (b) Multiply by 2 to represent a double span break.
Consult Table 4 to determine the required reinforcement
type and belt width. The value listed in the table must be
greater than the design break strength.
Step 8.
Step 4.
Calculate the belt pitch length based on the design center

distance of your drive using Formula 2 in Table 1.
Using the torque capacity graph, select a belt width that

is capable of handling the design torque with the selected
pulley size.
Note: This belt width may be different from the width
selected in Step 7. The belt width required for the system
will be the wider of the two.
Step 5.
Step 9.
Divide the belt pitch length by the tooth pitch selected and
round the result to the nearest whole number. This is the
number of teeth on the belt for your application. Adjust the
nominal center distance of your drive design to match the
belt using Formula 1 in Table 1.
ENGINEERING FORMULAS Table 1

No.
8
9
10
11
Where
Center Distance
(using unequal size pulleys
for driveR and driveN)
(approximation formula)
CD = center distance mm (in.)

PL = belt pitch length mm (in.)
D = large pulley pitch dia. mm (in.)
d = small pulley pitch dia. mm (in.)
Formula
CD =
b + b 2 - [8 x (D - d )2]
8
b = (2 x PL) - [ x (D + d )]
(D - d )2
PL = (2 x CD) + [1.57 x (D + d )] +
(4 x CD )
Belt Pitch Length

(approximation formula)
Number of Teeth on Belt
NB = number of teeth on belt

P = tooth pitch mm (in.)
Belt Speed
V = belt speed mm/sec. (in./sec.)

D x x rpm
Dr = pitch diameter of driver pulley mm (in.) V = R
60
rpm = speed of driver 1/min.
Teeth in Mesh
T.I.M. = teeth in mesh

Nd = number of teeth on small pulley
T.I.M. = 0.5 -
Effective Tension
Te = effective tension N (lbf)

Td = design torque N mm (lbf in.)
r = pulley radius mm (in.)
Te =
Design Torque
Td = design torque N mm (lbf in.)

Tpk = peak torque N mm (lbf in.)
Td =
13
14
16
IMPORTANT NOTE
Always incorporate a means of adjusting center distance
to allow for pitch length manufacturing tolerance.
Unknown
12
15
Special Note: Limiting torque values must be multiplied by

0.45 for fiberglass reinforced belts.
R-20
NB = PL
P
d)
[ ( (6(Dx-CD
)] Nd
)
Td
r
Tpk
T.I.M. factor
DESIGNING A MINIATURE BELT DRIVE

ENGINEERING FORMULAS Table 2 - Teeth in Mesh Factor

Teeth in Mesh on Drive
T.I.M. Factor
6 or more
5
4
3
2
1.0
0.8
0.6
0.4
0.2
T
1
ENGINEERING FORMULAS Table 3 - Strength Factor

Drive Description
Examples
Critical Positioning Tolerance

and Accuracy
High Positioning Tolerance
and Accuracy
Low Positioning Tolerance
and Accuracy
Pen Plotter, Printers and

Pick and Place Robots
Medical Equipment, Paper Handling
and Security Cameras
Home Appliances, Currency Equipment
and Light Load Unidirectional Drives
Strength Factor
0.10
0.20
ENGINEERING FORMULAS Table 4 - Breaking Strength

Belt Width
3 mm
6 mm
Kevlar N (lbf)
905 (205)
1865 (420)
Fiberglass N (lbf)
485 (110)
995 (225)
2.66
300
TORQUE CAPACITY
with Kevlar Cords
200
1.77
m
6m
150
AR
VL
KE
1.33
100
0.89
VLA
m KE
0.44
50
0
10
(0.394)
15
(0.591)
20
(0.787)
9
10
11
3m
5
(0.197)
2.21
NOTE: Multiply limiting torque

values by 0.5 when selecting
fiberglass reinforced belts
LIMITING TORQUE (lbf in.)
LIMITING TORQUE (N mm)
250
0.02
25
(0.984)
30
(1.181)
PITCH DIAMETER mm (in.)
12
13
14
15
R-21
16
TIMING BELTS, PULLEYS, CHAINS AND SPROCKETS

R
T
Handbook of Timing Belts, Pulleys, Chains and Sprockets

The Technical Section of this catalog is the result of close cooperation of Stock
Drive Products / Sterling Instrument staff with experts in the fields of power
transmission design and manufacturing. We wish, therefore, to recognize the
contribution of the following company and individuals:
Inch
The Gates Rubber Company, that provided the material contained in their publication 17183.
Staff of Stock Drive Products / Sterling Instrument:
2
3
4

Dr. Frank Buchsbaum, Executive Vice President, Designatronics, Inc.

Dr. Hitoshi Tanaka, Senior Vice President, Designatronics, Inc.
Robbie Robinson, Manager, New Products and Technology
Luis C. Quinteros, Product Engineer
James Mueser, Product Engineer
Linda Shuett, Graphic Communications Manager
Milton Epstein, Assistant Editor
John Chiaramonte, Senior Graphic Artist
Szymon Sondej, Graphic Artist
Melanie Hasranah, Graphic Artist
Julia Fischbach, Graphic Artist
...and many others on the staff who individually and collectively spent their time and effort
that resulted in publication of this text.
No part of this publication may be reproduced in any form or by any means without the prior
written permission of the Company. This does not cover material which was attributed to
another publication.
7
8
9
10
11
12
13
14
15
16
T-2
T-0

TABLE OF CONTENTS
PAGE
SECTION 1 INTRODUCTION ..................................................................................................................................T-3

SECTION 2 GATES POWERGRIP GT 2 BELT DRIVES ....................................................................................T-4
SECTION 3 COMPARISON GRAPHS ....................................................................................................................T-6
SECTION 4

4.1

4.2

4.3

4.4
DRIVE COMPARATIVE STUDIES ......................................................................................................T-8

Durability .............................................................................................................................................T-8
Tooth Jump Resistance .....................................................................................................................T-8
Noise ....................................................................................................................................................T-9
Positioning Accuracy ........................................................................................................................T-9
SECTION 5 DIFFERENT BELT CONFIGURATIONS ..............................................................................................T-10

5.1 Double-Sided Twin Power Belt Drives .........................................................................................T-10

5.2 Long Length Timing Belt Stock ........................................................................................................T-10
T
1
2
3
4
BELT CONSTRUCTION .......................................................................................................................T-10
Characteristics Of Reinforcing Fibers ............................................................................................T-11

Cord Twist And Its Effect On The Drive ..........................................................................................T-12
Factors Contributing To Side Travel ................................................................................................T-13
Characteristics Of Belt Body Materials .........................................................................................T-14
SECTION 7 BELT TOOTH PROFILES .....................................................................................................................T-15
SECTION 6

6.1

6.2

6.3

6.4
SECTION 8 PULLEY PITCH AND OUTSIDE DIAMETERS ..................................................................................T-16

SECTION 9

9.1

9.2

9.3

9.4

9.5

9.6

9.7

9.8

9.9
DESIGN AND INSTALLATION SUGGESTIONS ..............................................................................T-22
Low-Speed Operation .......................................................................................................................T-23

High-Speed Operation .......................................................................................................................T-23
Smooth Running .................................................................................................................................T-24
Drive Noise ..........................................................................................................................................T-24
Static Conductivity .............................................................................................................................T-24
Operating Environments ...................................................................................................................T-25
Belt Tracking .......................................................................................................................................T-26
Pulley Flanging ...................................................................................................................................T-27
Registration .........................................................................................................................................T-28
10
SECTION 10 BELT TENSIONING .............................................................................................................................T-29

10.1 What Is Proper Installation Tension ...............................................................................................T-29

10.2 Making Measurements .....................................................................................................................T-31
12
SECTION 11 DRIVE ALIGNMENT ...........................................................................................................................T-32

11.1 Angular And Parallel .........................................................................................................................T-32

11.2 Practical Tips ......................................................................................................................................T-33
SECTION 12 INSTALLATION AND TAKE-UP .........................................................................................................T-33

12.1 Installation Allowance ......................................................................................................................T-33
T-1
11
13
14
15
16

R
T
1
2
3
4
5
12.2
12.3
12.4
Belt Installation ........................................................................................................................................T-33

Belt Take-up ..............................................................................................................................................T-34
Fixed Center Drives ..................................................................................................................................T-34
SECTION 13 IDLER USAGE ............................................................................................................................................T-35

13.1 Inside/Outside ...........................................................................................................................................T-35

13.2 Tight Side/Slack Side ...............................................................................................................................T-35

13.3 Idler Placement ........................................................................................................................................T-35

13.4 Spring-Loaded Idlers ...............................................................................................................................T-35

13.5 Size Recommendations ...........................................................................................................................T-35

13.6 Specifying Shaft Locations In Multipoint Drive Layouts ...................................................................T-36
SECTION 14 BELT PULL AND BEARING LOADS ........................................................................................................T-37

14.1 Motion Transfer Drives ............................................................................................................................T-38

14.2 Power Transmission Drives ....................................................................................................................T-38

14.3 Registration Drives ..................................................................................................................................T-39

14.4 Bearing Load Calculations .....................................................................................................................T-39
SECTION 15 HANDLING AND STORAGE ....................................................................................................................T-40
SECTION 16 STANDARDS APPLICABLE TO BELTS ..................................................................................................T-40
6
7
8
9
10
11
12
13
14
15
16
SECTION 17 STANDARDS APPLICABLE TO PULLEYS AND FLANGES ..................................................................T-42

17.1 Pulley Tolerances .....................................................................................................................................T-43

17.2 Pulley Materials .......................................................................................................................................T-46

17.3 Flange Design And Face Width Guidelines .........................................................................................T-46

17.4 Guidelines For PowerGrip GT2 Flange Design ................................................................................T-47
SECTION 18 DOUBLE-SIDED TWIN POWER BELT TOLERANCES ........................................................................T-48
SECTION 19 LONG LENGTH TIMING BELT STOCK SPECIFICATIONS ...................................................................T-49
SECTION 20 DESIGN AIDS ON INTERNET (www.sdp-si.com) ...............................................................................T-50
SECTION 21 DRIVE RATIO TABLES ..............................................................................................................................T-51
SECTION 22 CENTER DISTANCE FORMULAS ............................................................................................................T-58

22.1 Nomenclature And Basic Equations .....................................................................................................T-58

22.2 Exact Center Distance Determination Unequal Pulleys .................................................................T-58

22.3 Exact Center Distance Determination Equal Pulleys ......................................................................T-59

22.4 Approximate Center Distance Determination .....................................................................................T-59

22.5 Number Of Teeth In Mesh (TIM) ............................................................................................................T-59

22.6 Determination Of Belt Size For Given Pulleys And Center Distance .............................................. T-60
SECTION 23 CENTER DISTANCE FACTOR TABLES................................................................................................. ..T-60
SECTION 24 TIMING BELT DRIVE SELECTION PROCEDURE................................................................................. ..T-61
LIST OF TABLES ........................................................................................................................................................... ..T-83
LIST OF FIGURES .......................................................................................................................................................... ..T-85
T-2

SECTION 1 INTRODUCTION

Timing belts are parts of synchronous drives which represent an important category of drives.
Characteristically, these drives employ the positive engagement of two sets of meshing teeth. Hence, they do
not slip and there is no relative motion between the two elements in mesh.

Due to this feature, different parts of the drive will maintain a constant speed ratio or even a permanent
relative position. This is extremely important in applications such as automatic machinery in which a definite
motion sequence and/or indexing is involved.

The positive nature of these drives makes them capable of transmitting large torques and withstanding
large accelerations.

Belt drives are particularly useful in applications where layout flexibility is important. They enable the
designer to place components in more advantageous locations at larger distances without paying a price
penalty. Motors, which are usually the largest heat source, can be placed away from the rest of the mechanism.
Achieving this with a gear train would represent an expensive solution.

Timing belts are basically flat belts with a series of evenly spaced teeth on the inside circumference,
thereby combining the advantages of the flat belt with the positive grip features of chains and gears.

There is no slippage or creep as with plain flat belts. Required belt tension is low, therefore producing
very small bearing loads. Synchronous belts will not stretch and do not require lubrication. Speed is transmitted
uniformly because there is no chordal rise and fall of the pitch line as in the case of roller chains.

The tooth profile of most commonly known synchronous belts is of trapezoidal shape with sides being
straight lines which generate an involute, similar to that of a spur gear tooth. As a result, the profile of the pulley
teeth is involute. Unlike the spur gear, however, the outside diameter of a timing pulley is smaller than its pitch
diameter, thus creating an imaginary pitch diameter which is larger than the pulley itself. This is illustrated in
Figure 1. Backlash between pulley and belt teeth is negligible.
Pitch (circular pitch)
Pitch (circular pitch)
e
Outsid
ter
Diame
Trapezodial
Tooth Profile
Pulley Pitch Circle
1
2
3
4
5
6
7
Belt Pitch Line
Belt Pitch Line

Pitch
Diameter
Pitch
Diameter
e
Outsid
ter
Diame
Curvilinear Tooth
Profile
Sprocket Pitch Circle

Fig. 1 Pulley and Belt Geometry

The trapezoidal shape timing belt was superseded by a curvilinear tooth profile which exhibited some
desirable and superior qualities. Advantages of this type of drive are as follows:

Proportionally deeper tooth; hence tooth jumping or loss of relative position is less probable.

Lighter construction, with correspondingly smaller centrifugal loss.

Smaller unit pressure on the tooth since area of contact is larger.

Greater shear strength due to larger tooth cross section.

Lower cost since a narrower belt will handle larger load.

Energy efficient, particularly if replacing a "V" belt drive which incurs energy losses due to slippage.

Installation tension is small, therefore, light bearing loads.
8
9
10
11
12
13
14
NOTE: Credit for portions of this technical section are given to: Gates Rubber Co., Sales Engineering Dept., Rubber
Manufacturers Association (RMA), International Organization for Standardization (ISO).
15
T-3
16

Tension Member
T
1
2
Curvilinear
Trapezoidal
Fig. 2 Stress Pattern in Belts
3
4
5
6
7
8
9
10
In Figure 2, the photoelastic pattern shows the stress distribution within teeth of different geometry.
There is a definite stress concentration near the root of the trapezoidal belt tooth, with very low strains
elsewhere. For the curvilinear tooth, there is a uniform, nearly constant, strain distribution across the belt.
The load is largest in the direction of the tension member to which it is transferred.

Because of their superior load carrying capabilities, the curvilinear belts are marketed under the name
of Gates' HTD drives. This is an abbreviation of High Torque Drives.

As a result of continuous research, a newer version of the curvilinear technology was developed by
Gates, which was designated as Gates' PowerGrip GT2 belt drives.
SECTION 2 GATES POWERGRIP GT2 BELT DRIVES

The PowerGrip GT2 Belt Drive System is an advance in product design over the Gates' older, standard
HTD system. The PowerGrip GT2 System, featuring a modified curvilinear belt tooth profile, provides timing
and indexing accuracy superior to the conventional PowerGrip Trapezoidal Belt System. Plus, PowerGrip GT2
Belts have a higher capacity and longer belt life than trapezoidal belts.

It's difficult to make a true quantitative comparison between the backlash of a trapezoidal tooth drive and
PowerGrip GT2 drive due to the difference in "pulley to belt tooth" fit (see Figure 3). Trapezoidal belts contact
the pulley in the root radius-upper flank area only, while the PowerGrip GT2 system permits full flank contact.

The main stress line in a trapezoidal tooth timing belt is at the base of the teeth. During operation, this
stress greatly reduces belt life. The PowerGrip GT2 system overcomes this condition with its complete tooth
flank contact which eliminates the tooth stress line area. This greatly increases belt life and prevents tooth
distortion caused by drive torque. In addition, the conventional timing belt has a chordal effect as it wraps
small pulleys. This is significantly reduced in the PowerGrip GT2 system because there is full tooth support
11
12
13
PowerGrip GT2 Belt

Tooth/Groove Contact
PowerGrip HTD Belt

PowerGrip Trapezoidal Belt

Fig. 3 Comparison of Different Tooth Profiles
14
15
16
T-4

along the pulley. Full support improves meshing, reduces vibration and minimizes tooth deformation.

On drives using a low installation tension, small pulleys, and light loads, the backlash of the PowerGrip
GT2 system will be slightly better than the trapezoidal timing belt system. However, with increased tension
and/or loads and/or pulley sizes, the performance of the PowerGrip GT2 system becomes significantly better
than the trapezoidal timing belt system.

The PowerGrip GT2 system is an extension of the HTD system with greater load-carrying capacity.
HTD was developed for high torque drive applications, but is not acceptable for most precision indexing or
registration applications. The HTD design requires substantial belt tooth to pulley groove clearance (backlash)
to perform.

As smaller diameter pulleys are used, the clearance required to operate properly is increased. HTD drive
clearance, using small diameter pulleys, is approximately four times greater than an equivalent GT2 timing belt
drive.

The PowerGrip GT2 system's deep tooth design increases the contact area which provides improved
resistance to ratcheting. The modified curvilinear teeth enter and exit the pulley grooves cleanly, resulting
in reduced vibration. This tooth profile design results in parallel contact with the groove and eliminates
stress concentrations and tooth deformation under load. The PowerGrip GT2 design improves registration
characteristics and maintains high torque carrying capability.

PowerGrip GT2 belts are currently available in 2 mm, 3 mm, 5 mm, 8 mm and 14 mm pitches. Specific
advantages of the PowerGrip GT2 system can be summarized as follows:
Longer belt life
The strong fiberglass tensile cords wrapped in a durable neoprene body provide the flexibility needed
for increased service life. The deep tooth profile provides superior load-carrying strength and greatly
reduces ratcheting when used with pulleys provided by a licensed supplier.
Precision registration
PowerGrip GT2 belts provide timing and synchronization accuracy that make for flawless registration,
with no loss of torque carrying capacity.
Increased load-carrying capacity
Load capacities far exceed HTD and trapezoidal belt capabilities making PowerGrip GT2 belts the choice
for accurate registration, heavy loads and small pulleys.
Quieter operation
The PowerGrip GT2 belt's specially engineered teeth mesh cleanly with pulley grooves to reduce noise
and vibration. Clean meshing and reduced belt width result in significant noise reduction when compared
to Trapezoidal and HTD belts.
Precise positioning
PowerGrip GT2 belts are specifically designed for applications where precision is critical, such as
computer printers and plotters, laboratory equipment and machine tools.
Some of the many applications of PowerGrip GT2 belts are:
data storage equipment
printers
machine tools
floor care equipment
hand power tools
money handling equipment
postage handling equipment
medical diagnostic equipment
DC stepper/servo applications
sewing machines
food processors
vacuum cleaners
centrifuges
automated teller machines
ticket dispensers
plotters
copiers
robotics equipment
vending equipment
office equipment
R
T
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
T-5
16


In order to provide comparison of performances of different pitch drives, several graphs have been
developed. Figure 4 shows numerical values, plotted in logarithmic scale, of Rated Horsepower vs. Speed
(rpm) of faster shaft.
700
SECTION 3 COMPARISON GRAPHS
14 mm
GT2
100
XXH
10
XH
Rated Horsepower
5 mm
GT2
3 mm
GT2
L
T10
XL
T5
2 mm
GT2
10
MXL
T2.5
.1
11
12
T-6
100
150
200
300
400
870
690
575
1,160
1,750
2,500
Speed (rpm) of Faster Shaft
15
16
5,000
4,000
3,450
20,000
14
10,000
.01
13
Fig. 4 Comparative Belt Pitch Selection Guide
MXL
XL
L
H
XH
XXH
8 mm
GT2
= .080" pitch
= .200" pitch
= .375" pitch
= .500" pitch
= .875" pitch
= 1.250" pitch


Figure 5 shows an illustrative graph representation of horsepower ratings over a wide speed range of
the belt types commonly used. The graph assumes that belt widths and pulley diameters have been chosen
such that they provide realistic comparison of product capability.
R
T
1
Rated Horsepower
5
4
3
2
1
0
1
10
12
14
16
18
20
Speed (rpm)
Fig. 5 Horsepower Ratings at High Speed
6
7

Figure 6 provides a comparison of the rated torque carrying capabilities of synchronous belts, on small
diameter pulleys at low speeds. The pulley diameters and belt widths represent a realistic comparison.
8
9
10
Rated Horsepower
0.38
0.30
11
0.23
0.15
12
0.08
0
10
20
40
60
100
200
300
500
700
13
1000
Speed (rpm)
14
Fig. 6 Horsepower Ratings at Low Speed
15
T-7
16

R
T
1
SECTION 4 DRIVE COMPARATIVE STUDIES

The development of the PowerGrip GT2 belt has produced an impressive range of enhanced properties
and subsequent design opportunities for engineers.

Comparative studies, shown in Figures 7 through 10, allow designers to make quantitative assessments
and to highlight the most significant improvements and design opportunities. Particularly significant points
from the comparative studies follow:
4.1 Durability

The greatly increased durability of the PowerGrip GT2 design has resulted in power capacities far above
those quoted for similar size belts of previous designs. The resulting small drive packages will increase design
flexibility, space utilization and cost effectiveness.
3
Performance Ratio (%)
200
4
5
150
Test Stopped
100
50
0
3 mm HTD
3 mm GT2
TEST CONDITIONS: Speed = 6000 rpm

Power = 1.00 lbf in./mm width

Pulleys: Driver = 20 grooves

Driven = 20 grooves
6
7
3 mm HTD Versus 3 mm PowerGrip GT2
200
Performance Ratio (%)
5 mm HTD Versus 5 mm PowerGrip GT2

Test Stopped
150
100
50
0
5 mm HTD
5mm GT2
TEST CONDITIONS: Speed = 2300 rpm

Power = 3.35 lbf in./mm width


Driven = 20 grooves
Fig. 7 Comparison of Performance Ratios for Various Belts

4.2 Tooth Jump Resistance

The very significant improvement in tooth jump resistance of PowerGrip GT2 when compared to similar
belts has several important advantages.
12
13
14
Tooth Jump Torque (lbf in.)
11
10
2 mm PowerGrip GT2 vs MXL

2 mm GT2
MXL
6
4
2
0
1 2 3 4 5
Installed Tension (lbf)
TEST CONDITIONS:

Speed = 1130 rpm

Belt Width = 4.8 mm


Driven = 20 grooves
3 mm PowerGrip GT2 vs 3 mm HTD

60
50
40
30
3 mm GT2
3 mm HTD
20
10
0
2 4 6 8 10
TEST CONDITIONS:

Speed = 750 rpm

Belt Width = 6 mm


Driven = 30 grooves
450
375
300
T-8
5 mm GT2
5 mm HTD
225
150
75
0
15 30 45 60 75
TEST CONDITIONS:

Speed = 2300 rpm

Belt Width = 15 mm


Driven = 20 grooves
Fig. 8 Comparison of Tooth Jump Torques for Various Belts
15
16
10
1. Ratcheting resistance during high start-up torques.

2. Reduced bearing loads, particularly in fixed-center drives. Lower average tensions can be used
without encountering tooth jump at the low tension end of the tolerance ranges.
3. Reduced system losses result from lower pre-tensioning, with less potential for tooth jumping.

4.3 Noise

The smoother meshing action of the PowerGrip GT2 belt, with its optimized design, produces significantly
lower noise levels when compared with other similar sized belt types operating under similar speeds and
tensions. These improvements are enhanced by the fact that narrower belts can be used due to increased
power capacities.
110
100
100
90
90
80
3 mm HTD
70
60
Noise (dBA)
Noise (dBA)
110
1
2
5 mm HTD
80
70
5 mm GT2
60
3 mm GT2
50
50
40
1000 1500 2000 2500 3000 3500 4000 4500
Speed (rpm)
40
1000 1500 2000 2500 3000 3500 4000 4500
Speed (rpm)
Belt:
No. of teeth = 118

Width = 30 mm

Driven = 20 grooves
Microphone location midway between
the pulleys, 100 mm from the belt edge.
Belt:
No. of teeth = 188

Width = 15 mm

Driven = 26 grooves
Microphone location midway between
the pulleys, 100 mm from the belt edge.
5
6
Fig. 9 Comparison of Noise Levels for Various Belts

4.4 Positioning Accuracy

The PowerGrip HTD belt tooth forms were primarily designed to transmit high torque loads. This
requirement increased tooth to groove clearances which resulted in increased backlash when compared with
the original trapezoidal designs.

PowerGrip GT2 has reversed this problem with power capacities now exceeding those of PowerGrip HTD
while giving equivalent or higher levels of positional accuracy than trapezoidal timing belts.
.002
.001
0
10
.003
Positioning Error (in.)
Positioning Error (in.)
.003
2 mm GT2
MXL
APPLICATION: Motion Transfer

Belt: No. of teeth = 126

Width = 8 mm

Driven = 40 grooves
Installed tension = 1.8 lbf
Motor = 200 steps/cycle
.002
11
.001
0
3 mm GT2
3 mm HTD
APPLICATION: Motion Transfer

Belt: No. of teeth = 92

Width = 6 mm

Driven = 20 grooves
Installed tension = 6.6 lbf
Motor = 200 steps/cycle
Fig. 10 Comparison of Positioning Errors of Various Belts
12
13
14
15
T-9
16

SECTION 5 DIFFERENT BELT CONFIGURATIONS

5.1 Double-Sided Twin Power Belt Drives
T
1
2
3
4
5
6
7
8
9

Timing belts are also available in double-sided designs, which offer an infinite number of new design
possibilities on computer equipment, business machines, office equipment, textile machines and similar lightduty applications. Belts with driving teeth on both sides make it possible to change the direction of rotation of
one or more synchronized pulleys with only one belt. The inside and outside teeth are identical as to size and
pitch and operate on standard pitch diameter pulleys.

If the belts have nylon facing on both sides, then the same design parameters can be used for the drives
on both sides of the belt. In case the outside teeth do not have nylon facing, the horsepower rating of the
outside teeth is only 45% of the total load.
Pulley B

For example: assuming the drive pulley
Outside Teeth
Pulley A
.45 hp
Inside Teeth
and belt are capable of transmitting 1
.55 hp
horsepower, 0.55 hp can be transmitted from
Driver
the inside teeth of the pulley (A), and 0.45 hp
Output
1 hp
can be transmitted by the outside teeth to
pulley (B) for a total of 1 hp, the rated capacity
Belt Direction
of the driver pulley.
Fig. 11 Double-Sided Timing Belt
5.2 Long Length Timing Belt Stock

These belts are an excellent solution for drives
that require belt lengths longer than those produced in
conventional endless form. Long length belting has the
same basic construction as conventional timing belts.
These belts are usually produced by spiral cut of large
diameter endless belts.

These belts are creatively used in:

reciprocating carriage drives

rack and pinion drives

large plotters

An example of application is shown in Figure 13. A
complete timing belt and a timing belt segment reduce
vibration and chatter in this oscillating drive for a surface
grinder.
10
SECTION 6 BELT CONSTRUCTION
11
12
13

The load-carrying elements of
the belts are the tension members
built into the belts (see Figure 14).
These tension members can be
made of:

1. Spirally wound steel wire.

2. Wound glass fibers.

3. Polyester cords.
4. Kevlar.
14
Fig. 13 Example of Timing Belt Stock Use
Trapezoidal
Curvilinear
Fig. 14 Belt Construction
15
16
Fig. 12 Timing Belt Stock
T-10


The tension members are embedded in neoprene or polyurethane. The neoprene teeth are protected by
a nylon fabric facing which makes them wear resistant.

The contributions of the construction members of these belts are as follows:
1.
Tensile Member Provides high strength, excellent flex life and high resistance to elongation.
2.
Neoprene Backing Strong neoprene bonded to the tensile member for protection against grime,
oil and moisture. It also protects from frictional wear if idlers are used on the
back of the belt.
3.
Neoprene Teeth Shear-resistant neoprene compound is molded integrally with the neoprene
backing. They are precisely formed and accurately spaced to assure smooth
meshing with the pulley grooves.
4.
Nylon Facing Tough nylon fabric with a low coefficient of friction covers the wearing surfaces of
the belt. It protects the tooth surfaces and provides a durable wearing surface for
long service.
R
T
1
2
3
6.1 Characteristics Of Reinforcing Fibers

Polyester

Tensile Strength
160,000 lbf/in.2

Elongation at break
14.0%

Modulus (approx.)
2,000,000 lbf/in.2

One of the main advantages of polyester cord over higher tensile cords is the lower modulus of polyester,
enabling the belt to rotate smoothly over small diameter pulleys. Also, the elastic properties of the material
enable it to absorb shock and dampen vibration.

In more and more equipment, stepping motors are being used. Polyester belts have proven far superior
to fiberglass or Kevlar reinforced belts in these applications.

High-speed applications with small pulleys are best served by polyester belts under low load.
Kevlar

Tensile Strength
400,000 lbf/in.2

Elongation at break
2.5%

Modulus
18,000,000 lbf/in.2

High tensile strength and low elongation make this material very suitable for timing belt applications.
Kevlar has excellent shock resistance and high load capacity.
Fiberglass

Tensile Strength
350,000 lbf/in.2

Elongation at break
2.5 3.5%

Modulus
10,000,000 lbf/in.2
The most important advantages are:

1. High strength.

2. Low elongation or stretch.

3. Excellent dimensional stability.

4. Excellent chemical resistance.

5. Absence of creep, 100% elongation recovery.
Disadvantages:

1. High modulus (difficult to bend).

2. Brittleness of glass. Improper handling or installation can cause permanent damage.

3. Poor shock resistance. No shock absorbing quality when used in timing belts.
4
5
6
7
8
9
10
11
12
13
Steel

Tensile Strength
360,000 lbf/in.2

Elongation at break
2.5%

Modulus (approx.)
15,000,000 lbf/in.2

Additional characteristics of tension members and their effect on the drive design are shown in tabulated
form in Table 1.
T-11
14
15
16

Table 1 Comparison of Different Tension Member Materials *

E = Excellent
G = Good
F = Fair
P = Poor
Nylon
Polyester
Cont. Fil. Yarn
Polyester
Spun Yarn
Kevlar-Polyester
Mix
Kevlar
Cont. Fil. Yarn
Kevlar
Spun Yarn
Glass
Stainless
Steel
Polyester Film
Reinforcement
Operate Over Small Pulley
High Pulley Speed
High Intermittent Shock Loading
Vibration Absorption
High Torque Low Speed
Low Belt Stretch
Dimensional Stability
High Temperature 200 F
Low Temperature
Good Belt Tracking
Rapid Start/Stop Operation
Close Center-Distance Tolerance
Belt Requirements
1
2
3
4
5
6
Elasticity Required in Belt

* Courtesy of Chemiflex, Inc.
6.2 Cord Twist And Its Effect On The Drive
7
8
9
10
11
12

There is a specific reason for not
applying the yarn directly in the form of
untwisted filaments around the mold. If the
filament would be applied continuously, the
top and bottom of the belt body would be
prevented from being properly joined, and
separation could result. See Figure 15.

Two strands each composed of several
filaments are twisted around each other, thus
forming a cord which is subsequently wound
in a helical spiral around the mold creating
a space between subsequent layers, which
corresponds to the step of the helix. The
two strands, however, can be twisted two
ways in order to create an "S" or a "Z" twist
construction. See Figure 16.

13
14
15
16
T-12
Continuously Applied Filament

Step of Helix
Spirally Applied Filament
Fig. 15 Belt Cross Section
Fig. 16 Cord Twist


The "S" twist is obtained if we visualize the two strands being held stationary with our left hand on one
end, while a clockwise rotation is imparted by our right hand to the two strands, thus creating a twisted cord.
The "Z" twist is obtained similarly, if a counterclockwise rotation is imparted to the two strands.

Different types of cord twist will cause side thrust in opposite directions. The "S" twist will cause a lateral
force direction which will obey the "Right-Hand" rule as shown in Figure 17.
R
T
1
2
3
Belt Travels
Toward Motor
Belt Travels Away

From Motor
(a) Clockwise Rotation
(b) Counterclockwise Rotation
5
Fig. 17 Right-Hand Rule Applicable to "S" Twist
A "Z" type cord twist will produce a direction of lateral force opposite to that of "S" cord. Therefore, in order to
produce a belt with minimum lateral force, standard belts are usually made with "S" and "Z" twist construction,
in which alternate cords composed of strands twisted in opposite directions are wound in the belt. This is
illustrated in Figure 18.

The lay of the cord is standard, as shown
Mold
in Figure 18, and it is wound from left to right
with the cord being fed under the mold. The
smaller the mold diameter and the fewer the
strands of cord per inch, the greater the helix
angle will be, and the greater the tendency of
the lay of the cord to make the belt move to one
side.

In general, a standard belt of "S" and "Z"
construction, as shown in Figure 18, will have
S
Z
a slight tendency to behave as a predominantly
"S" twist belt, and will obey the "Right-Hand"
Fig. 18 "S" and "Z" Cord Lay of the Mold
rule accordingly.
6
7
8
9
10
11
6.3 Factors Contributing To Side Travel

The pulleys in a flat belt drive are crowned to keep the belt running true. Since crowned pulleys are not
suitable for a timing belt, the belt will always track to one side. Factors contributing to this condition include:
12
13
I. In the Drive
1. Misalignment A belt (any belt any construction) will normally climb to the high end
(or tight) side.
2. Tensioning In general, lateral travel can be altered or modified by changing tension.
3. Location of plane Vertical drives have a greater tendency to move laterally due
to gravity.
T-13
14
15
16

R
T
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
6.3 Factors Contributing To Side Travel (Cont.)

4. Belt width greater than O.D. of pulley This condition creates an abnormal degree of
lateral travel.

5. Belt length The greater the ratio of length/width of the belt, the less the tendency to
move laterally.
II. In the Belt
1. Direction of the lay of the cords in the belt. See Figure 18.
2. Twist of the strands in the cord. See Figure 16.
6.4 Characteristics Of Belt Body Materials
Basic characteristics of the three most often used materials are shown in Table 2. The tabulated
characteristics give rise to the following assessment of these materials:
Natural Rubber

High resilience, excellent compression set, good molding properties

High coefficient of friction; does not yield good ground finish

High tear strength, low crack growth

Can withstand low temperatures

Poor oil and solvent resistance; unusable for ketones and alcohol

Ozone attacks rubber, but retardants can be added
Neoprene

High resilience

Flame resistant

Aging good with some natural ozone resistance

Oil and solvent resistance fair
Polyurethane

Excellent wear resistance, poor compression set

Low coefficient of friction

Oil and ozone resistance good

Low-temperature flexibility good

Not suitable for high temperatures
Polymer Compound (EPDM), Cream-Colored

Clean running

High operating temperature

Good environmental performance

Nonmarking

Quieter functioning
Table 2 Comparison of Different Belt Body Materials *
Common Name
Natural Rubber
Neoprene
Urethanes
Cream-Colored Polymer
Compound (EPDM)
Chemical Definition
Durometer Range (Shore A)
Tensile Strength Range (lbf/in.2)
Elongation (Max. %)
Compression Set
Resilience Rebound
Abrasion Resistance
Tear Resistance
Solvent Resistance
Oil Resistance
Low Temperature Range (F)
Min. For Continuous Use (F)
High Temperature Range (F)
Max. For Continuous (F)
Aging Weather - Sunlight
Adhesion to Metals
Polyisoprene
3095
5003500
900
Excellent
Excellent
Good to Excellent
Good to Excellent
Poor
Poor
-70 to -20
-60
+180 to +220
+180
Poor to Fair
Excellent
Polychloroprene
2095
5003000
800
Poor to Good
Fair to Good
Very Good to Excellent
Good to Excellent
Fair
Fair
-70 to -30
-80
+200 to +250
+250
Good to Excellent
Excellent
Polyester/Polyether Urethane
35-95
500-6000
900
Poor to Good
Poor to Good
Excellent
Good to Excellent
Poor
Good
-65 to -40
-65
+180 to +220
+200
Good to Excellent
Excellent
Ethylene Propylene Diene

3090
5002500
700
Poor to Excellent
Fair to Good
Good
Fair to Good
Poor
Poor
-60 to -40
-60
+220 to +300
+300
Excellent
Good to Excellent
* Courtesy of Robinson Rubber Products
16
T-14

SECTION 7 BELT TOOTH PROFILES

There are several belt tooth profiles (Figure 19, Table 3) which are the result of different patented
features, marketing and production considerations.
.080
(2.03)
.030 (0.76)
.005 R
(0.13 R)
TYP
.0816
(2.07)
.024
(0.6)
.018
(0.46)
.018
(0.46)
.048
(1.2)
.045 (1.14)
.128
(3.25)
.075
(1.9)
.020 R
(0.5 R)
TYP
.140 (3.56)
.118
(3)
.118
(3)
.098
(2.5)
.059
(1.5)
.197
(5)
.045
(1.14)
Fig. 19h 3 mm Pitch GT2
.028
(0.7)
.051
(1.3)
.016 R
(0.4 R)
TYP
.197
(5)
.047
(1.2)
40
.104
(2.65)
.098
(2.5)
.177
(4.5)
40
Fig. 19k T5 mm Pitch
MXL
40DP
XL
L
H
HTD
GT2
Pitch
Inch
0.080
0.0816
0.200
0.375
0.500
0.118
0.197
0.315
0.079
0.118
0.197
0.315
0.551
0.098
0.197
0.394
mm
2.03
2.07
5.08
9.525
12.7
3
5
8
2
3
5
8
14
2.5*
5*
10*
N
80
125
218
601
285
454
792
111
507
712
1690
2891
312
930
1800
lbf
20 to 32
20 to 32
32
7
8
Fig. 19l T10 mm Pitch
Allowable Working Tension Per 1 Inch of Belt Width

Neoprene
Urethane/Polyester Urethane/Kevlar
lbf
18
28
49
135
64
102
178
25
114
160
380
650
70
209
405
6
.209
(5.3)
Fig. 19 Belt Tooth Configuration

Dimensions in ( ) are mm
Table 3 Allowable Working Tension of Different Belt Constructions
Belt
Type
.394
(10)
40
Fig. 19j T2.5 mm Pitch
19a
19b
19c
19d
19e
19f
19g
19h
19i
19j
19k
19l
.076
(1.93)
Fig. 19i 5 mm Pitch GT2

.024 R
(0.6 R)
TYP
.087
(2.2)
.150
(3.81)
Fig. 19g 2 mm Pitch GT2
.008 R
(0.2 R)
TYP
Fig. 19f 5 mm Pitch HTD
.095
(2.41)
.060
(1.52)
.082
(2.08)
.150
(3.81)
Fig. 19e 3 mm Pitch HTD
.030
(0.76)
.079
(2)
.197
(5)
.048
(1.22)
1
2
Fig. 19c 0.200 Pitch XL
.095
(2.41)
40
.375
(9.525)
Fig. 19d
0.375 Pitch L
50
60
Fig. 19b 0.0816 Pitch 40 D.P.
Fig. 19a 0.080 Pitch MXL
T
.050
(1.3)
.090 (2.3)
.003
40
.200
(5.08)
.054
(1.4)
.015 R
(0.4 R)
TYP
N
89 to 142
89 to 142
142
lbf
32 to 70
32 to 70
40
N
142 to 311
142 to 311
178
* Urethane w/Steel Cords

NOTE: For thinner belt widths, less than 1", the tension must be derated
since the tension cords on the sides are not complete loops.
10
11
12
13
14
15
T-15
16

R
T
1
2
3
4
5
6
7

For the sake of completeness, the three additional belt profiles shown in Figure 19j, 19k and 19l are used
in Europe and are sometimes found on machinery imported from Europe and Japan. They are not produced
in the U.S.A. and are not covered by RMA standards. The belts are made of polyurethane, and steel is usually
used as the tension member.

As described in previous sections, the presently known most advantageous belt tooth configuration is
the Gates PowerGrip GT2. This is a result of continuous improvement of the previous HTD tooth profile. The
HTD profile is protected by U.S. Patent Number 4,337,056, whereas the GT2 profile is described in U.S. Patent
Number 4,515,577.

Pulleys for these belt profiles are usually available from manufacturers licensed by Gates Rubber
Company. Stock Drive Products is one of the companies who can supply a full range of these pulleys as
standards or specials, per customers' drawings.
SECTION 8 PULLEY PITCH AND OUTSIDE DIAMETERS

Pulley and belt geometry as indicated in Figure 1 shows reference to a Pitch Circle, which is larger than
the pulley itself. Its size is determined by the relationship:

PN

pd =
(8-1)
where P is the belt tooth spacing (pitch) and N is the number of teeth on the pulley. The reinforcing cord
centerline will coincide with the pulley pitch diameter while the belt is in contact with the pulley. At the same
time, the outside diameter of the pulley will be in contact with the bottom of the belt tooth. Hence, the distance
U between the reinforcing cord centerline and the bottom of the belt tooth will determine the outside
diameters of pulleys for different pitches. See Table 4.
Table 4 Basic Belt Dimensions
Distance from Pitch Line

to Belt Tooth Bottom U
Common Description
Pulley O.D.
O.D. = pd 2U
.010 inches
.007 inches
.010 inches
.015 inches
0.080" MXL
40 D.P.
1/5" XL
3/8" L
10
.015 inches
.0225 inches
.027 inches
3 mm HTD
5 mm HTD
8 mm HTD
11
.010 inches
.015 inches
.0225 inches
2 mm GT2
3 mm GT2
5 mm GT2
12
0.3 millimeters
0.5 millimeters
1.0 millimeters
T2.5 (2.5 mm)

T5 (5 mm)
T10 (10 mm)
13
14

As previously noted, the pitch and the number of teeth will determine the pitch diameter of the pulley,
whereas its outside diameter will depend on the U dimension (distance from tooth bottom to centerline of
cord) as shown in Table 4.
15
16
T-16

The outside diameter, O.D., is then given by:

O.D. = pd 2U

(8-2)

In order to provide fast reference, the following tables show pitch and outside diameters of different pitch
pulleys:

Table 5: T2.5 (2.5 mm Pitch)*

Table 6: T5 (5 mm Pitch)*
Table 7: T10 (10 mm Pitch)*
R
T
1
2

These tables enable the designer to judge immediately the space requirements for a particular drive. In
many instances, the torque transmission capability of the drive can be satisfied by a less voluminous solution.
This is one of the excellent features of the GT2 profile; it facilitates miniaturization. The size of the small pulley
of the drive, however, is subject to some limitations. The suggested minimum size of the pulley related to a
particular pitch and rpm is given in Table 8.
* NOTE: T2.5, T5 and T10 series have O.D.s and Pitch Diameters which do not conform to equations (8-1) and (8-2).
6
7
8
9
10
11
12
13
14
15
T-17
16

R
T
1
2
3
4
5
6
7
8
9
10
11
12
13
Table 5 T2.5 (.098") Pitch Pulley Dimensions

No.
of
Grooves
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
14
15
16
Inch
mm
Inch
mm
No.
of
Grooves
.317
.348
.378
.409
.441
.472
.504
.535
.567
.598
.630
.661
.693
.724
.754
.785
.817
.848
.880
.911
.943
.974
1.006
1.037
1.069
1.100
1.132
1.161
1.193
1.224
1.256
1.287
1.319
1.350
1.382
1.413
1.445
1.476
1.508
1.537
1.569
1.600
1.632
1.663
1.695
1.726
1.758
1.789
1.821
1.852
1.884
8.05
8.85
9.60
10.40
11.20
12.00
12.80
13.60
14.40
15.20
16.00
16.80
17.60
18.40
19.15
19.95
20.75
21.55
22.35
23.15
23.95
24.75
25.55
26.35
27.15
27.95
28.75
29.50
30.30
31.10
31.90
32.70
33.50
34.30
35.10
35.90
36.70
37.50
38.30
39.05
39.85
40.65
41.45
42.25
43.05
43.85
44.65
45.45
46.25
47.05
47.85
.293
.325
.354
.386
.417
.449
.480
.512
.543
.575
.606
.638
.669
.701
.730
.762
.793
.825
.856
.888
.919
.951
.982
1.014
1.045
1.077
1.108
1.138
1.169
1.201
1.232
1.264
1.295
1.327
1.358
1.390
1.421
1.453
1.484
1.514
1.545
1.577
1.608
1.640
1.671
1.703
1.734
1.766
1.797
1.829
1.860
7.45
8.25
9.00
9.80
10.60
11.40
12.20
13.00
13.80
14.60
15.40
16.20
17.00
17.80
18.55
19.35
20.15
20.95
21.75
22.55
23.35
24.15
24.95
25.75
26.55
27.35
28.15
28.90
29.70
30.50
31.30
32.10
32.90
33.70
34.50
35.30
36.10
36.90
37.70
38.45
39.25
40.05
40.85
41.65
42.45
43.25
44.05
44.85
45.65
46.45
47.25
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
Pitch Diameter
T-18
Outside Diameter
Pitch Diameter
Outside Diameter
Inch
mm
Inch
mm
1.915
1.945
1.976
2.008
2.039
2.071
2.102
2.134
2.165
2.197
2.228
2.260
2.291
2.321
2.352
2.384
2.415
2.447
2.478
2.510
2.541
2.573
2.604
2.636
2.667
2.699
2.728
2.760
2.791
2.823
2.854
2.886
2.917
2.949
2.980
3.012
3.043
3.075
3.104
3.136
3.167
3.199
3.230
3.262
3.293
3.325
3.356
3.388
3.419
3.451
3.482
48.65
49.40
50.20
51.00
51.80
52.60
53.40
54.20
55.00
55.80
56.60
57.40
58.20
58.95
59.75
60.55
61.35
62.15
62.95
63.75
64.55
65.35
66.15
66.95
67.75
68.55
69.30
70.10
70.90
71.70
72.50
73.30
74.10
74.90
75.70
76.50
77.30
78.10
78.85
79.65
80.45
81.25
82.05
82.85
83.65
84.45
85.25
86.05
86.85
87.65
88.45
1.892
1.921
1.953
1.984
2.016
2.047
2.079
2.110
2.142
2.173
2.205
2.236
2.268
2.297
2.329
2.360
2.392
2.423
2.455
2.486
2.518
2.549
2.581
2.612
2.644
2.675
2.705
2.736
2.768
2.799
2.831
2.862
2.894
2.925
2.957
2.988
3.020
3.051
3.081
3.112
3.144
3.175
3.207
3.238
3.270
3.301
3.333
3.364
3.396
3.427
3.459
48.05
48.80
49.60
50.40
51.20
52.00
52.80
53.60
54.40
55.20
56.00
56.80
57.60
58.35
59.15
59.95
60.75
61.55
62.35
63.15
63.95
64.75
65.55
66.35
67.15
67.95
68.70
69.50
70.30
71.10
71.90
72.70
73.50
74.30
75.10
75.90
76.70
77.50
78.25
79.05
79.85
80.65
81.45
82.25
83.05
83.85
84.65
85.45
86.25
87.05
87.85

Table 6 T5 (.197") Pitch Pulley Dimensions

No.
of
Grooves
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
Inch
mm
Inch
mm
No.
of
Grooves
.632
.695
.758
.821
.884
.947
1.008
1.071
1.134
1.197
1.260
1.323
1.384
1.447
1.510
1.573
1.636
1.699
1.762
1.823
1.886
1.949
2.012
2.075
2.138
2.199
2.262
2.325
2.388
2.451
2.514
2.575
2.638
2.701
2.764
2.827
2.890
2.951
3.014
3.077
3.140
3.203
3.266
3.329
3.390
3.453
3.516
3.579
3.642
3.705
3.766
16.05
17.65
19.25
20.85
22.45
24.05
25.60
27.20
28.80
30.40
32.00
33.60
35.15
36.75
38.35
39.95
41.55
43.15
44.75
46.30
47.90
49.50
51.10
52.70
54.30
55.85
57.45
59.05
60.65
62.25
63.85
65.40
67.00
68.60
70.20
71.80
73.40
74.95
76.55
78.15
79.75
81.35
82.95
84.55
86.10
87.70
89.30
90.90
92.50
94.10
95.65
.593
.656
.719
.781
.844
.907
.969
1.031
1.094
1.157
1.220
1.283
1.344
1.407
1.470
1.533
1.596
1.659
1.722
1.783
1.846
1.909
1.972
2.035
2.098
2.159
2.222
2.285
2.348
2.411
2.474
2.535
2.598
2.661
2.724
2.787
2.850
2.911
2.974
3.037
3.100
3.163
3.226
3.289
3.350
3.413
3.476
3.539
3.602
3.665
3.726
15.05
16.65
18.25
19.85
21.45
23.05
24.60
26.20
27.80
29.40
31.00
32.60
34.15
35.75
37.35
38.95
40.55
42.15
43.75
45.30
46.90
48.50
50.10
51.70
53.30
54.85
56.45
58.05
59.65
61.25
62.85
64.40
66.00
67.60
69.20
70.80
72.40
73.95
75.55
77.15
78.75
80.35
81.95
83.55
85.10
86.70
88.30
89.90
91.50
93.10
94.65
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
Pitch Diameter
Outside Diameter
Pitch Diameter
Outside Diameter
Inch
mm
Inch
mm
3.829
3.892
3.955
4.018
4.081
4.142
4.205
4.268
4.331
4.394
4.457
4.518
4.581
4.644
4.707
4.770
4.833
4.896
4.957
5.020
5.083
5.146
5.209
5.272
5.333
5.396
5.459
5.522
5.585
5.648
5.709
5.772
5.835
5.898
5.961
6.024
6.085
6.148
6.211
6.273
6.337
6.400
6.463
6.524
6.587
6.650
6.713
6.776
6.839
6.900
6.963
97.25
98.85
100.45
102.05
103.65
105.20
106.80
108.40
110.00
111.60
113.20
114.75
116.35
117.95
119.55
121.15
122.75
124.35
125.90
127.50
129.10
130.70
132.30
133.90
135.45
137.05
138.65
140.25
141.85
143.45
145.00
146.60
148.20
149.80
151.40
153.00
154.55
156.15
157.75
159.34
160.95
162.55
164.15
165.70
167.30
168.90
170.50
172.10
173.70
175.25
176.85
3.789
3.852
3.915
3.978
4.041
4.102
4.165
4.228
4.291
4.354
4.417
4.478
4.541
4.604
4.667
4.730
4.793
4.856
4.917
4.980
5.043
5.106
5.169
5.232
5.293
5.356
5.419
5.482
5.545
5.608
5.669
5.732
5.795
5.858
5.921
5.984
6.045
6.108
6.171
6.234
6.297
6.360
6.423
6.484
6.547
6.610
6.673
6.736
6.799
6.860
6.923
96.25
97.85
99.45
101.05
102.65
104.20
105.80
107.40
109.00
110.60
112.20
113.75
115.35
116.95
118.55
120.15
121.75
123.35
124.90
126.50
128.10
129.70
131.30
132.90
134.45
136.05
137.65
139.25
140.85
142.45
144.00
145.60
147.20
148.80
150.40
152.00
153.55
155.15
156.75
158.34
159.95
161.55
163.15
164.70
166.30
167.90
169.50
171.10
172.70
174.25
175.85
T
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
T-19
16

R
T
1
2
3
4
5
6
7
8
9
10
11
12
13
Table 7 T10 (.394") Pitch Pulley Dimensions

No.
of
Grooves
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
14
15
16
Inch
mm
Inch
mm
No.
of
Grooves
1.259
1.384
1.510
1.636
1.760
1.886
2.012
2.136
2.262
2.388
2.512
2.638
2.764
2.888
3.014
3.140
3.264
3.390
3.514
3.640
3.766
3.890
4.016
4.142
4.266
4.392
4.518
4.642
4.768
4.894
5.018
5.144
5.270
5.394
5.520
5.646
5.770
5.896
6.022
6.146
6.272
6.398
6.522
6.648
6.774
6.898
7.024
7.150
7.274
7.400
7.526
31.98
35.16
38.35
41.55
44.70
47.90
51.10
54.25
57.45
60.65
63.80
67.00
70.20
73.35
76.55
79.75
82.90
86.10
89.25
92.45
95.65
98.80
102.00
105.20
108.35
111.55
114.75
117.90
121.10
124.30
127.45
130.65
133.85
137.00
140.20
143.40
146.55
149.75
152.95
156.10
159.30
162.50
165.65
168.85
172.05
175.20
178.40
181.60
184.75
187.95
191.15
1.180
1.306
1.431
1.557
1.681
1.807
1.933
2.057
2.183
2.309
2.433
2.559
2.685
2.809
2.935
3.061
3.185
3.311
3.435
3.561
3.687
3.811
3.937
4.063
4.187
4.313
4.439
4.563
4.689
4.815
4.939
5.065
5.191
5.315
5.441
5.567
5.691
5.817
5.943
6.067
6.193
6.319
6.443
6.569
6.695
6.819
6.945
7.071
7.195
7.321
7.447
29.98
33.16
36.35
39.55
42.70
45.90
49.10
52.25
55.45
58.65
61.80
65.00
68.20
71.35
74.55
77.75
80.90
84.10
87.25
90.45
93.65
96.80
100.00
103.20
106.35
109.55
112.75
115.90
119.10
122.30
125.45
128.65
131.85
135.00
138.20
141.40
144.55
147.75
150.95
154.10
157.30
160.50
163.65
166.85
170.05
173.20
176.40
179.60
182.75
185.95
189.15
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
Pitch Diameter
T-20
Outside Diameter
Pitch Diameter
Outside Diameter
Inch
mm
Inch
mm
7.650
7.776
7.902
8.026
8.169
8.278
8.402
8.528
8.654
8.778
8.904
9.030
9.154
9.280
9.406
9.530
9.656
9.780
9.906
10.031
10.156
10.281
10.407
10.531
10.657
10.783
10.907
11.033
11.159
11.283
11.409
11.535
11.659
11.785
11.911
12.035
12.161
12.287
12.411
12.537
12.663
12.787
12.913
13.039
13.163
13.289
13.415
13.539
13.665
13.791
13.915
194.30
197.50
200.70
203.85
207.50
210.25
213.40
216.60
219.80
222.95
226.15
229.35
232.50
235.70
238.90
242.05
245.25
248.40
251.60
254.80
257.95
261.15
264.35
267.50
270.70
273.90
277.05
280.25
283.45
286.60
289.80
293.00
296.15
299.35
302.55
305.70
308.90
312.10
315.25
318.45
321.65
324.80
328.00
331.20
334.35
337.55
340.75
343.90
347.10
350.30
353.45
7.571
7.697
7.823
7.947
8.090
8.199
8.323
8.449
8.575
8.699
8.825
8.950
9.075
9.201
9.327
9.451
9.577
9.701
9.827
9.953
10.077
10.203
10.329
10.453
10.579
10.705
10.829
10.955
11.081
11.205
11.331
11.457
11.581
11.707
11.833
11.957
12.083
12.209
12.333
12.459
12.585
12.709
12.835
12.961
13.085
13.211
13.337
13.461
13.587
13.713
13.837
192.30
195.50
198.70
201.85
205.50
208.25
211.40
214.60
217.80
220.95
224.15
227.35
230.50
233.70
236.90
240.05
243.25
246.40
249.60
252.80
255.95
259.15
262.35
265.50
268.70
271.90
275.05
278.25
281.45
284.60
287.80
291.00
294.15
297.35
300.55
303.70
306.90
310.10
313.25
316.45
319.65
322.80
326.00
329.20
332.35
335.55
338.75
341.90
345.10
348.30
351.45

Table 8 Minimum Pulley Diameters

Belt
Type
Pitch
Inch
Max.
mm
MXL
.080
2.03
XL
.200
5.08
.375
9.525
.500
12.7
.118
HTD
GT2
.197
.315
.079
.118
.197
.098
2.5
.197
.394
10
rpm
10000
7500
5000
3500
3500
1750
1160
3500
1750
1160
3500
1750
1160
3500
1750
1160
3500
1750
1160
3500
1750
1160
14000
7500
5000
5000
2800
1600
2000
1400
1000
3600
1800
1200
< 1200
3600
1800
1200
< 1200
3600
1800
1200
< 1200
Suggested Minimum *
Pitch Diameter
No. of
Grooves
Inch
mm
14
12
11
10
12
11
10
16
14
12
20
18
16
20
18
17
30
26
22
32
28
24
16
14
12
20
18
16
22
20
18
.357
.306
.280
.255
.764
.700
.637
1.910
1.671
1.432
3.182
2.865
2.546
.752
.677
.639
1.880
1.629
1.379
3.208
2.807
2.406
.401
.351
.301
.752
.677
.602
1.379
1.253
1.128
9.07
7.77
7.11
6.48
19.41
17.78
16.18
48.51
42.44
36.37
80.82
72.77
64.67
19.1
17.2
16.23
47.75
41.38
35.03
81.48
71.3
61.11
10.19
8.92
7.65
19.1
17.2
15.29
35.03
31.83
28.65
14
.417
10.6
16
.480
12.2
14
.844
21.45
16
.969
24.6
16
1.931
49.05
18
2.183
55.45
* Smaller pulleys than shown under "Suggested Minimum" may be used if a corresponding reduction in belt
life is satisfactory. Use of pulleys smaller than those shown will be at customers' own responsibility for
performance and belt life.
T
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
T-21
16

R
T
1
2
3
4
5
6
7
8
9
10
11
12
SECTION 9 DESIGN AND INSTALLATION SUGGESTIONS

There are some general guidelines which are applicable to all timing belts, including miniature and
double-sided belts:

1. Drives should always be designed with ample reserve horsepower capacity. Use of overload service
factors is important. Belts should be rated at only 1/15th of their respective ultimate strength.

2. For MXL pitch belts, the smallest recommended pulley will have 10 teeth. For other pitches,
Table 8, on the previous page, should be used.

3. The pulley diameter should never be smaller than the width of the belt.

4. Belts with Fibrex-glass fiber tension members should not be subjected to sharp bends or rough
handling, since this could cause breakage of the fibers.

5. In order to deliver the rated horsepower, a belt must have six or more teeth in mesh with the grooves
of the smaller pulley. The number of teeth in mesh may be obtained by formula given in
SECTION 24 TIMING BELT DRIVE SELECTION PROCEDURE. The shear strength of a single tooth is
only a fraction of the belt break strength.

6. Because of a slight side thrust of synchronous belts in motion, at least one pulley in the drive must
be flanged. When the center distance between the shafts is 8 or more times the diameter of the
smaller pulley, or when the drive is operating on vertical shafts, both pulleys should be flanged.

7. Belt surface speed should not exceed 5500 feet per minute (28 m/s) for larger pitch belts and 10000
feet per minute (50 m/s) for minipitch belts. For the HTD belts, a speed of 6500 feet per minute
(33 m/s) is permitted, whereas for GT2 belts, the maximum permitted speed is 7500 feet per minute
(38 m/s). The maximum allowable operating speed for T series is 4000 feet per minute (20 m/s).

8. Belts are, in general, rated to yield a minimum of 3000 hours of useful life if all instructions are
properly followed.

9. Belt drives are inherently efficient. It can be assumed that the efficiency of a synchronous belt drive
is greater than 95%.

10. Belt drives are usually a source of noise. The frequency of the noise level increases proportionally
with the belt speed. The higher the initial belt tension, the greater the noise level. The belt teeth
entering the pulleys at high speed act as a compressor and this creates noise. Some noise is the
result of a belt rubbing against the flange, which in turn may be the result of the shafts not being
parallel. As shown in Figure 9 (page T-9), the noise level is substantially reduced if the PowerGrip
GT2 belt is being used.

11. If the drive is part of a sensitive acoustical or electronics sensing or recording device, it is
recommended that the back surfaces of the belt be ground to assure absolutely uniform belt
thickness.

12. For some applications, no backlash between the driving and the driven shaft is permitted. For these
cases, special profile pulleys can be produced without any clearance between the belt tooth and
pulley. This may shorten the belt life, but it eliminates backlash. Figure 10 (page T-9) shows the
superiority of PowerGrip GT2 profile as far as reduction of backlash is concerned.

13. Synchronous belts are often driven by stepping motors. These drives are subjected to continuous
and large accelerations and decelerations. If the belt reinforcing fiber, i.e., tension member, as well
as the belt material, have high tensile strength and no elongation, the belt will not be instrumental
in absorbing the shock loads. This will result in sheared belt teeth. Therefore, take this into account
when the size of the smallest pulley and the materials for the belt and tension member are selected.

14. The choice of the pulley material (metal vs. plastic) is a matter of price, desired precision, inertia,
color, magnetic properties and, above all, personal preference based on experiences. Plastic
pulleys with metal inserts or metal hubs represent a good compromise.
13
14
15
16
T-22

The following precautions should be taken when installing all timing belt drives:

1. Timing belt installation should be a snug fit, neither too tight nor too loose. The positive grip of the
belt eliminates the need for high initial tension. Consequently, a belt, when installed with a snug fit
(that is, not too taut) assures longer life, less bearing wear and quieter operation. Preloading (often
the cause of premature failure) is not necessary.

When torque is unusually high, a loose belt may "jump teeth" on starting. In such a case, the tension
should be increased gradually, until satisfactory operation is attained. A good rule of thumb for
installation tension is as shown in Figure 20, and the corresponding tensioning force is shown in
Table 9, both shown in SECTION 10 BELT TENSIONING. For widths other than shown, increase force
proportionally to the belt width. Instrumentation for measuring belt tension is available. Consult the
product section of this catalog.

2. Be sure that shafts are parallel and pulleys are in alignment. On a long center drive, it is sometimes
advisable to offset the driven pulley to compensate for the tendency of the belt to run against one
flange.

3. On a long center drive, it is imperative that the belt sag is not large enough to permit teeth on the
slack side to engage the teeth on the tight side.

4. It is important that the frame supporting the pulleys be rigid at all times. A nonrigid frame causes
variation in center distance and resulting belt slackness. This, in turn, can lead to jumping of teeth
especially under starting load with shaft misalignment.

5. Although belt tension requires little attention after initial installation, provision should be made for
some center distance adjustment for ease in installing and removing belts. Do not force belt over
flange of pulley.

6. Idlers, either of the inside or outside type, are not recommended and should not be used except for
power takeoff or functional use. When an idler is necessary, it should be on the slack side of the
belt. Inside idlers must be grooved, unless their diameters are greater than an equivalent 40-groove
pulley. Flat idlers must not be crowned (use edge flanges). Idler diameters must exceed the smallest
diameter drive pulley. Idler arc of contact should be held to a minimum.

In addition to the general guidelines enumerated previously, specific operating characteristics of the
drive must be taken into account. These may include the following:
R
T
1
2
3
4
5
6
7
8
9.1 Low-Speed Operation

Synchronous drives are especially well-suited for low-speed, high torque applications. Their positive
driving nature prevents potential slippage associated with V-belt drives , and even allows significantly greater
torque carrying capability. Small pitch synchronous drives operating at speeds of 50 ft./min. (0.25 m/s) or less
are considered to be low-speed. Care should be taken in the drive selection process as stall and peak torques
can sometimes be very high. While intermittent peak torques can often be carried by synchronous drives
without special considerations, high cyclic peak torque loading should be carefully reviewed.

Proper belt installation tension and rigid drive bracketry and framework is essential in preventing belt
tooth jumping under peak torque loads. It is also helpful to design with more than the normal minimum of 6 belt
teeth in mesh to ensure adequate belt tooth shear strength.

Newer generation curvilinear systems like PowerGrip GT2 and PowerGrip HTD should be used in
low-speed, high torque applications, as trapezoidal timing belts are more prone to tooth jumping, and have
significantly less load carrying capacity.
9
10
11
12
9.2 High-Speed Operation

Synchronous belt drives are often used in high-speed applications even though V-belt drives are typically
better suited. They are often used because of their positive driving characteristic (no creep or slip), and
because they require minimal maintenance (don't stretch significantly). A significant drawback of high-speed
synchronous drives is drive noise. High-speed synchronous drives will nearly always produce more noise
than V-belt drives. Small pitch synchronous drives operating at speeds in excess of 1300 ft./min. (6.6 m/s) are
considered to be high-speed.
T-23
13
14
15
16

R
T
1
2
3
4
5
6
7
8
9
10
11
12
13

Special consideration should be given to high-speed drive designs, as a number of factors can
significantly influence belt performance. Cord fatigue and belt tooth wear are the two most significant factors
that must be controlled to ensure success. Moderate pulley diameters should be used to reduce the rate of
cord flex fatigue. Designing with a smaller pitch belt will often provide better cord flex fatigue characteristics
than a larger pitch belt. PowerGrip GT2 is especially well suited for high-speed drives because of its excellent
belt tooth entry/exit characteristics. Smooth interaction between the belt tooth and pulley groove minimizes
wear and noise. Belt installation tension is especially critical with high-speed drives. Low belt tension allows
the belt to ride out of the driven pulley, resulting in rapid belt tooth and pulley groove wear.
9.3 Smooth Running

Some ultrasensitive applications require the belt drive to operate with as little vibration as possible,
as vibration sometimes has an effect on the system operation or finished manufactured product. In these
cases, the characteristics and properties of all appropriate belt drive products should be reviewed. The final
drive system selection should be based upon the most critical design requirements, and may require some
compromise.

Vibration is not generally considered to be a problem with synchronous belt drives. Low levels of
vibration typically result from the process of tooth meshing and/or as a result of their high tensile modulus
properties. Vibration resulting from tooth meshing is a normal characteristic of synchronous belt drives, and
cannot be completely eliminated. It can be minimized by avoiding small pulley diameters, and instead choosing
moderate sizes. The dimensional accuracy of the pulleys also influences tooth meshing quality. Additionally, the
installation tension has an impact on meshing quality. PowerGrip GT2 drives mesh very cleanly, resulting in the
smoothest possible operation. Vibration resulting from high tensile modulus can be a function of pulley quality.
Radial run out causes belt tension variation with each pulley revolution. V-belt pulleys are also manufactured
with some radial run out, but V-belts have a lower tensile modulus resulting in less belt tension variation. The
high tensile modulus found in synchronous belts is necessary to maintain proper pitch under load.
9.4 Drive Noise

Drive noise evaluation in any belt drive system should be approached with care. There are many potential
sources of noise in a system, including vibration from related components, bearings, and resonance and
amplification through framework and panels.

Synchronous belt drives typically produce more noise than V-belt drives. Noise results from the process
of belt tooth meshing and physical contact with the pulleys. The sound pressure level generally increases as
operating speed and belt width increase, and as pulley diameter decreases. Drives designed on moderate
pulley sizes without excessive capacity (overdesigned) are generally the quietest. PowerGrip GT2 drives
have been found to be significantly quieter than other systems due to their improved meshing characteristic
(see Figure 9, page T-9). Polyurethane belts generally produce more noise than neoprene belts. Proper belt
installation tension is also very important in minimizing drive noise. The belt should be tensioned at a level that
allows it to run with as little meshing interference as possible.

Drive alignment also has a significant effect on drive noise. Special attention should be given to
minimizing angular misalignment (shaft parallelism). This assures that belt teeth are loaded uniformly and
minimizes side tracking forces against the flanges. Parallel misalignment (pulley offset) is not as critical of a
concern as long as the belt is not trapped or pinched between opposite flanges (see the special section dealing
with drive alignment). Pulley materials and dimensional accuracy also influence drive noise. Some users have
found that steel pulleys are the quietest, followed closely by aluminum. Polycarbonates have been found to be
noisier than metallic materials. Machined pulleys are generally quieter than molded pulleys. The reasons for
this revolve around material density and resonance characteristics as well as dimensional accuracy.
9.5 Static Conductivity
14
15
16

Small synchronous rubber or urethane belts can generate an electrical charge while operating on a
drive. Factors such as humidity and operating speed influence the potential of the charge. If determined to be
a problem, rubber belts can be produced in a conductive construction to dissipate the charge into the pulleys,
and to ground. This prevents the accumulation of electrical charges that might be detrimental to material
handling processes or sensitive electronics. It also greatly reduces the potential for arcing or sparking in
T-24

flammable environments. Urethane belts cannot be produced in a conductive construction.

RMA has outlined standards for conductive belts in their bulletin IP-3-3. Unless otherwise specified,
a static conductive construction for rubber belts is available on a made-to-order basis. Unless otherwise
specified, conductive belts will be built to yield a resistance of 300,000 ohms or less, when new.

Nonconductive belt constructions are also available for rubber belts. These belts are generally built
specifically to the customers conductivity requirements. They are generally used in applications where one
shaft must be electrically isolated from the other.

It is important to note that a static conductive belt cannot dissipate an electrical charge through plastic
pulleys. At least one metallic pulley in a drive is required for the charge to be dissipated to ground. A grounding
brush or similar device may also be used to dissipate electrical charges.

Urethane timing belts are not static conductive and cannot be built in a special conductive construction.
Special conductive rubber belts should be used when the presence of an electrical charge is a concern.
9.6 Operating Environments

Synchronous drives are suitable for use in a wide variety of environments. Special considerations may
be necessary, however, depending on the application.

Dust: Dusty environments do not generally present serious problems to synchronous drives as long as
the particles are fine and dry. Particulate matter will, however, act as an abrasive resulting in a higher rate of
belt and pulley wear. Damp or sticky particulate matter deposited and packed into pulley grooves can cause
belt tension to increase significantly. This increased tension can impact shafting, bearings, and framework.
Electrical charges within a drive system can sometimes attract particulate matter.

Debris: Debris should be prevented from falling into any synchronous belt drive. Debris caught in the
drive is generally either forced through the belt or results in stalling of the system. In either case, serious
damage occurs to the belt and related drive hardware.

Water: Light and occasional contact with water (occasional wash downs) should not seriously affect
synchronous belts. Prolonged contact (constant spray or submersion) results in significantly reduced tensile
strength in fiberglass belts, and potential length variation in aramid belts. Prolonged contact with water also
causes rubber compounds to swell, although less than with oil contact. Internal belt adhesion systems are
also gradually broken down with the presence of water. Additives to water, such as lubricants, chlorine,
anticorrosives, etc. can have a more detrimental effect on the belts than pure water. Urethane timing belts
also suffer from water contamination. Polyester tensile cord shrinks significantly and experiences loss of
tensile strength in the presence of water. Aramid tensile cord maintains its strength fairly well, but experiences
length variation. Urethane swells more than neoprene in the presence of water. This swelling can increase
belt tension significantly, causing belt and related hardware problems.
T
1
2
4
5
6
7
8
9
10

Oil: Light contact with oils on an occasional basis will not generally damage synchronous belts.
Prolonged contact with oil or lubricants, either directly or airborne, results in significantly reduced belt service
life. Lubricants cause the rubber compound to swell, breakdown internal adhesion systems, and reduce belt
tensile strength. While alternate rubber compounds may provide some marginal improvement in durability, it
is best to prevent oil from contacting synchronous belts.
11

Ozone: The presence of ozone can be detrimental to the compounds used in rubber synchronous belts.
Ozone degrades belt materials in much the same way as excessive environmental temperatures. Although the
rubber materials used in synchronous belts are compounded to resist the effects of ozone, eventually chemical
breakdown occurs and they become hard and brittle and begin cracking. The amount of degradation depends
upon the ozone concentration and duration of exposure. For good performance of rubber belts, the following
concentration levels should not be exceeded: (parts per hundred million)
13
Standard Construction:
Nonmarking Construction:
Conductive Construction:

Low Temperatures Construction:
100 pphm
20 pphm
75 pphm
20 pphm
12
14
15
T-25
16

R
T
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16

Radiation: Exposure to gamma radiation can be detrimental to the compounds used in rubber and
urethane synchronous belts. Radiation degrades belt materials much the same way excessive environmental
temperatures do. The amount of degradation depends upon the intensity of radiation and the exposure time.
For good belt performance, the following exposure levels should not be exceeded:

Standard Construction:
Nonmarking Construction:
Conductive Construction:
Low Temperatures Construction:
108 rads
104 rads
106 rads
104 rads

Dust Generation: Rubber synchronous belts are known to generate small quantities of fine dust, as a
natural result of their operation. The quantity of dust is typically higher for new belts, as they run in. The period
of time for run in to occur depends upon the belt and pulley size, loading and speed. Factors such as pulley
surface finish, operating speeds, installation tension, and alignment influence the quantity of dust generated.

Clean Room: Rubber synchronous belts may not be suitable for use in clean room environments,
where all potential contamination must be minimized or eliminated. Urethane timing belts typically generate
significantly less debris than rubber timing belts. However, they are recommended only for light operating
loads. Also, they cannot be produced in a static conductive construction to allow electrical charges to
dissipate.

Static Sensitive: Applications are sometimes sensitive to the accumulation of static electrical charges.
Electrical charges can affect material handling processes (like paper and plastic film transport), and sensitive
electronic equipment. Applications like these require a static conductive belt, so that the static charges
generated by the belt can be dissipated into the pulleys, and to ground. Standard rubber synchronous belts do
not meet this requirement, but can be manufactured in a static conductive construction on a made-to-order
basis. Normal belt wear resulting from long term operation or environmental contamination can influence belt
conductivity properties.

In sensitive applications, rubber synchronous belts are preferred over urethane belts since urethane
belting cannot be produced in a conductive construction.
9.7 Belt Tracking

Lateral tracking characteristics of synchronous belts is a common area of inquiry. While it is normal for
a belt to favor one side of the pulleys while running, it is abnormal for a belt to exert significant force against
a flange resulting in belt edge wear and potential flange failure. Belt tracking is influenced by several factors.
In order of significance, discussion about these factors is as follows:

Tensile Cord Twist: Tensile cords are formed into a single twist configuration during their manufacture.
Synchronous belts made with only single twist tensile cords track laterally with a significant force. To neutralize
this tracking force, tensile cords are produced in right- and left-hand twist (or "S" and "Z" twist) configurations.
Belts made with "S" twist tensile cords track in the opposite direction to those built with "Z" twist cord. Belts
made with alternating "S" and "Z" twist tensile cords track with minimal lateral force because the tracking
characteristics of the two cords offset each other. The content of "S" and "Z" twist tensile cords varies slightly
with every belt that is produced. As a result, every belt has an unprecedented tendency to track in either one
direction or the other. When an application requires a belt to track in one specific direction only, a single twist
construction is used. See Figures 16 & 17, previously shown, on pages T-12 and T-13.

Angular Misalignment: Angular misalignment, or shaft nonparallelism, cause synchronous belts to track
laterally. The angle of misalignment influences the magnitude and direction of the tracking force. Synchronous
belts tend to track "downhill" to a state of lower tension or shorter center distance.

Belt Width: The potential magnitude of belt tracking force is directly related to belt width. Wide belts
tend to track with more force than narrow belts.
T-26


Pulley Diameter: Belts operating on small pulley diameters can tend to generate higher tracking forces
than on large diameters. This is particularly true as the belt width approaches the pulley diameter. Drives with
pulley diameters less than the belt width are not generally recommended because belt tracking forces can
become excessive.

Belt Length: Because of the way tensile cords are applied on to the belt molds, short belts can tend to
exhibit higher tracking forces than long belts. The helix angle of the tensile cord decreases with increasing
belt length.

Gravity: In drive applications with vertical shafts, gravity pulls the belt downward. The magnitude of
this force is minimal with small pitch synchronous belts. Sag in long belt spans should be avoided by applying
adequate belt installation tension.
R
T
1
2

Torque Loads: Sometimes, while in operation, a synchronous belt will move laterally from side to side on
the pulleys rather than operating in a consistent position. While not generally considered to be a significant
concern, one explanation for this is varying torque loads within the drive. Synchronous belts sometimes track
differently with changing loads. There are many potential reasons for this; the primary cause is related to
tensile cord distortion while under pressure against the pulleys. Variation in belt tensile loads can also cause
changes in framework deflection, and angular shaft alignment, resulting in belt movement.

Belt Installation Tension: Belt tracking is sometimes influenced by the level of belt installation tension.
The reasons for this are similar to the effect that varying torque loads have on belt tracking.

When problems with belt tracking are experienced, each of these potential contributing factors should
be investigated in the order that they are listed. In most cases, the primary problem will probably be identified
before moving completely through the list.
9.8 Pulley Flanging

Pulley guide flanges are necessary to keep synchronous belts operating on their pulleys. As discussed
previously in Section 9.7 on belt tracking, it is normal for synchronous belts to favor one side of the pulleys
when running.

Proper flange design is important in preventing belt edge wear, minimizing noise and preventing the belt
from climbing out of the pulley. Dimensional recommendations for custom-made or molded flanges are included
in tables dealing with these issues.

Proper flange placement is important so that the belt is adequately restrained within its operating system.
Because design and layout of small synchronous drives is so diverse, the wide variety of flanging situations
potentially encountered cannot easily be covered in a simple set of rules without finding exceptions. Despite
this, the following broad flanging guidelines should help the designer in most cases:

Two Pulley Drives: On simple two pulley drives, either one pulley should be flanged on both sides, or
each pulley should be flanged on opposite sides.

Multiple Pulley Drives: On multiple pulley (or serpentine) drives, either every other pulley should be
flanged on both sides, or every pulley should be flanged on alternating sides around the system.

Vertical Shaft Drives: On vertical shaft drives, at least one pulley should be flanged on both sides, and
the remaining pulleys should be flanged on at least the bottom side.

Long Span Lengths: Flanging recommendations for small synchronous drives with long belt span lengths
cannot easily be defined due to the many factors that can affect belt tracking characteristics. Belts on drives
with long spans (generally 12 times the diameter of the smaller pulley or more) often require more lateral
restraint than with short spans. Because of this, it is generally a good idea to flange the pulleys on both sides.
6
7
8
9
10
11
12
13
14
15
T-27
16

R
T

Large Pulleys: Flanging large pulleys can be costly. Designers often wish to leave large pulleys unflanged
to reduce cost and space. Belts generally tend to require less lateral restraint on large pulleys than small and
can often perform reliably without flanges. When deciding whether or not to flange, the previous guidelines
should be considered. The groove face width of unflanged pulleys should also be greater than with flanged
pulleys. See Table 27, on page T-47 for recommendations.

Idlers: Flanging of idlers is generally not necessary. Idlers designed to carry lateral side loads from belt
tracking forces can be flanged, if needed, to provide lateral belt restraint. Idlers used for this purpose can be
used on the inside or backside of the belts. The previous guidelines should also be considered.
9.9 Registration

The three primary factors contributing to belt drive registration (or positioning) errors are belt elongation,
backlash, and tooth deflection. When evaluating the potential registration capabilities of a synchronous belt
drive, the system must first be determined to be either static or dynamic in terms of its registration function
and requirements.
4
5
6
7

Static Registration: A static registration system moves from its initial static position to a secondary static
position. During the process, the designer is concerned only with how accurately and consistently the drive
arrives at its secondary position. He/she is not concerned with any potential registration errors that occur
during transport. Therefore, the primary factor contributing to registration error in a static registration system
is backlash. The effects of belt elongation and tooth deflection do not have any influence on the registration
accuracy of this type of system.

Dynamic Registration: A dynamic registration system is required to perform a registering function while
in motion with torque loads varying as the system operates. In this case, the designer is concerned with
the rotational position of the drive pulleys with respect to each other at every point in time. Therefore, belt
elongation, backlash and tooth deflection will all contribute to registrational inaccuracies.

8
9
10
11
12
13
14
15
16
Further discussion about each of the factors contributing to registration error is as follows:

Belt Elongation: Belt elongation, or stretch, occurs naturally when a belt is placed under tension. The
total tension exerted within a belt results from installation, as well as working loads. The amount of belt
elongation is a function of the belt tensile modulus, which is influenced by the type of tensile cord and the
belt construction. The standard tensile cord used in rubber synchronous belts is fiberglass. Fiberglass has a
high tensile modulus, is dimensionally stable, and has excellent flex-fatigue characteristics. If a higher tensile
modulus is needed, aramid tensile cords can be considered, although they are generally used to provide
resistance to harsh shock and impulse loads. Aramid tensile cords used in small synchronous belts generally
have only a marginally higher tensile modulus in comparison to fiberglass. When needed, belt tensile modulus
data is available from our Application Engineering Department.

Backlash: Backlash in a synchronous belt drive results from clearance between the belt teeth and the
pulley grooves. This clearance is needed to allow the belt teeth to enter and exit the grooves smoothly with a
minimum of interference. The amount of clearance necessary depends upon the belt tooth profile. Trapezoidal
Timing Belt Drives are known for having relatively little backlash. PowerGrip HTD Drives have improved torque
carrying capability and resist ratcheting, but have a significant amount of backlash. PowerGrip GT2 Drives
have even further improved torque carrying capability, and have as little or less backlash than trapezoidal
timing belt drives. In special cases, alterations can be made to drive systems to further decrease backlash.
These alterations typically result in increased belt wear, increased drive noise and shorter drive life. Contact
our Application Engineering Department for additional information.

Tooth Deflection: Tooth deformation in a synchronous belt drive occurs as a torque load is applied to the
system, and individual belt teeth are loaded. The amount of belt tooth deformation depends upon the amount of
torque loading, pulley size, installation tension and belt type. Of the three primary contributors to registration
error, tooth deflection is the most difficult to quantify. Experimentation with a prototype drive system is the best
means of obtaining realistic estimations of belt tooth deflection.
T-28

Additional guidelines that may be useful in designing registration critical drive systems are as follows:
Select PowerGrip GT2 or trapezoidal timing belts.
Design with large pulleys with more teeth in mesh.
Keep belts tight, and control tension closely.
Design frame/shafting to be rigid under load.
Use high quality machined pulleys to minimize radial runout and lateral wobble.
T
1
SECTION 10 BELT TENSIONING

10.1 What Is Proper Installation Tension

One of the benefits of small synchronous belt drives is lower belt pre-tensioning in comparison to
comparable V-belt drives, but proper installation tension is still important in achieving the best possible
drive performance. In general terms, belt pre-tensioning is needed for proper belt/pulley meshing to prevent
belt ratcheting under peak loading, to compensate for initial belt tension decay, and to prestress the drive
framework. The amount of installation tension that is actually needed is influenced by the type of application
as well as the system design. Some general examples of this are as follows:

Motion Transfer Drives: Motion transfer drives, by definition, are required to carry extremely light torque
loads. In these applications, belt installation tension is needed only to cause the belt to conform to and mesh
properly with the pulleys. The amount of tension necessary for this is referred to as the minimum tension (Tst).
Minimum tensions, on a per span basis, are included in Table 9, on page T-30. Some motion transfer drives
carry very little torque, but have a need for accurate registration requirements. These systems may require
additional static (or installation) tension in order to minimize registration error.

Normal Power Transmission Drives: Normal power transmission drives should be designed in
accordance with published torque ratings and a reasonable service factor (between 1.5 and 2.0). In these
applications, belt installation tension is needed to allow the belt to maintain a proper fit with the pulleys while
under load, and to prevent belt ratcheting under peak loads. For these drives, proper installation tension can
be determined using two different approaches. If torque loads are known and well defined, and an accurate
tension value is desired, Equation (10-1) or Equation (10-2) should be used. If the torque loads are not as well
defined, and a quick value is desired for use as a starting point, values from Table 10 can be used. All static
tension values are on a per span basis.

0.812 DQ

Tst = + mS2
(lbf)

d

(For drives with a Service Factor of 1.3 or greater)
1.05 DQ

Tst = + mS2
(lbf)

d

(For drives with a Service Factor less than 1.3)
where:
Tst =

DQ =

d
=

S =

m =
2
3
4
5
6
7
8
(10-1)
(10-2)
10
11
Static tension per span (lbf)

Driver design torque (lbf in.)
Driver pitch diameter (in.)
Belt speed/1000 (ft./min.)
where Belt speed = (Driver pitch diameter x Driver rpm)/3.82
Mass factor from Table 9
12
13
14
15
T-29
16

Table 9 Belt Tensioning Force
T
2 mm GT2
1
3 mm GT2
2
5 mm GT2
3 mm HTD
5 mm HTD
MXL
XL
T2.5
T5
T10
11
Minimum Tst (lbf)

Per Span
4 mm
6 mm
9 mm
12 mm
6 mm
9 mm
12 mm
15 mm
9 mm
15 mm
20 mm
25 mm
6 mm
9 mm
15 mm
9 mm
15 mm
25 mm
1/8"
3/16"
1/4"
1/4"
3/8"
1/2"
3/4"
1"
4 mm
6 mm
10 mm
6 mm
10 mm
16 mm
16 mm
25 mm
0.026
0.039
0.058
0.077
0.077
0.120
0.150
0.190
0.170
0.280
0.380
0.470
0.068
0.102
0.170
0.163
0.272
0.453
0.003
0.004
0.005
0.010
0.015
0.19
0.29
0.38
1.37
2.05
3.08
4.10
3.22
4.83
6.45
8.06
14.9
24.9
33.2
41.5
3.81
5.71
9.52
14.9
24.9
41.5
1.40
2.11
2.81
3.30
4.94
10.00
18.00
25.00
0.3
0.55
1.05
7
17
27
73
133
1.3
2.0
3.0
4.0
2.2
3.3
4.4
5.5
8.4
14.1
18.7
23.4
2.5
4.3
7.8
6.3
12.0
21.3
1.0
1.7
2.3
3.2
5.1
13.0
19.0
25.0
0.2
0.45
0.92
2.25
5.62
8.99
24.73
44.96
*
*
*
NOTE: Y = constant used in Equations (10-4) and (10-5).

* Not available at press time.
9
10
Belt
Width
Belt
Registration Drives: Registration drives are required to register, or position accurately. Higher belt installation
tensions help in increasing belt tensile modulus as well as in increasing meshing interference, both of which
reduce backlash. Tension values for these applications should be determined experimentally to confirm that
desired performance characteristics have been achieved. As a beginning point, use values from Table 10
multiplied by 1.5 to 2.0.
Table 10 Static Belt Tension, Tst (lbf) Per Span General Values
12
13
14
15
16
T-30
Belt
2 mm GT2
3 mm GT2
5 mm GT2
3 mm HTD
5 mm HTD
T2.5
T5
T10
4 mm
2
0.34
6 mm
3
8
0.67
3
9 mm
4
11
18
9
13
1.37
7
12 mm
5
15
22
12
18
15 mm
19
27
16
24
12
28
20 mm
25
35
22
33
25 mm
43
43
41
Belt
MXL
XL
1/8"
2
2
3/16"
3
3
1/4"
3
4
5/16"
4
5
3/8"
5
6
7/16"
1/2"


Most synchronous belt applications often exhibit their own individual operating characteristics. The static
installation tensions recommended in this section should serve as a general guideline in determining the level
of tension required. The drive system should be thoroughly tested to confirm that it performs as intended.
10.2 Making Measurements

Belt installation tension is generally measured in the following ways:

Force/Deflection: Belt span tension can be measured by deflecting a belt span 1/64" per inch (0.4 mm per
25 mm) of span length at midspan, with a known force (see Figure 20). This method is generally convenient,
but not always very accurate, due to difficulty in measuring small deflections and forces common in small
synchronous drives. The force/deflection method is most effective on larger drives with long span lengths. The
static (or installation) tension (Tst) can either be calculated from Equation (10-1) or Equation (10-2), or selected
from Table 9 or Table 10. The deflection forces can be calculated from Equation (10-4) and Equation (10-5).
The span length can either be calculated from Equation (10-3), or measured. If the calculated static tension is
less than the minimum Tst values in Table 9, use the minimum values.

PD pd 2

t = CD 2

2
where:

t
CD
PD
pd
=
=
=
=
(10-3)
Span length (in.)

Drive center distance (in.)
Large pitch diameter (in.)
Small pitch diameter (in.)

t

Tst + () Y

L

Deflection force, Min. = (lbf)

16

t

1.1 Tst + () Y

L

Deflection force, Max. = (lbf)

16
where:

Tst
t
L
Y
=
=
=
=
Static tension (lbf)

Span length (in.)
Belt pitch length (in.)
Constant, from Table 9
Deflection 1/64"
per inch of span
ength,
t
2
3
4
Span L
5
Force
6
Fig. 20 Force/Deflection Method
(10-4)
(10-5)
Separation
Force
Adjustment
Fig. 21 Shaft Separation Method

Shaft Separation: Belt installation
nsion
Static Te
tension can be applied directly by
Parallel
to Lower
exerting a force against either the driver
Span
Parallel
Resultant
nsion
Tensioning
or driven shaft in a simple 2-point drive
Static Te
Force
Static Te
system (see Figure 21). The resulting belt
nsion
Motor
Parallel
Parallel
tension will be as accurate as the force
to Upper
Span
applied to driver or driven shaft. This
Static Tens
ion
method is considerably easier to perform
Fig. 22 Single Tension Vector Force
than the force/deflection method and, in
some cases, more accurate.

In order to calculate the required shaft separation force, the proper static tension (on a per span basis)
should first be determined as previously discussed. This tension value will be present in both belt spans as
tension is applied. The angle of the spans with respect to the movable shaft should then be determined. The
belt spans should be considered to be vectors (force with direction), and be summed into a single tension
vector force (see Figure 22). Refer to SECTION 14 BELT PULL AND BEARING LOADS for further instructions
on summing vectors.
9
10
11
12
13
14
15
T-31
16

R
T

Idler Force: Belt installation tension can also be applied by exerting a force against an idler pulley within
the system that is used to take up belt slack (see Figure 23). This force can be applied manually, or with a
spring. Either way, the idler should be locked down after the appropriate tension has been applied.

Calculating the required force will involve a vector analysis as described previously in the shaft
separation section.
Force
Inside
Idler
1
2
3
4
5
6
7
8
Backside Idler

Sonic Tension Meter: The
Sonic Tension Meter (Figure 24) is an
electronic device that measures the
natural frequency of a free stationary
Force
belt span and instantly computes the
static belt tension based upon the belt
Fig. 23 ldler Forces
span length, belt width, and belt type. This
provides accurate and repeatable tension
measurements while using a nonintrusive
procedure (the measurement process
itself doesn't change the belt span
tension). A measurement is made simply
by plucking the belt while holding the
Fig. 24 Sonic Tension Meter
sensor close to the vibrating belt span.

The unit is about the size of a portable phone (8-1/8" long x 3-3/4" wide x 1-3/8" thick or 206mm long x
95mm wide x 35mm thick) so it can be easily handled. The sensor is about 1/2" (13mm) in diameter for use
in cramped spaces, and the unit is either battery operated for portability or AC operated for production
use. The unit measures virtually all types of light power and precision belts. An automatic gain adjustment
allows measurements to be made in environments with high noise levels. A fully powered meter is necessary
for optimal microphone sensitivity. The meter has 3 settings standard (10 to 600 Hz), high (500 to 5000 Hz),
and low (10 to 50 Hz), but is normally set to standard. It is best to know the target belt span frequency, but
the appropriate range can be selected through trial and error. Data can also be collected through an IBM
Compatible RS-232 serial port, if desired. For additional details, see the product manual or page in the catalog.
SECTION 11 DRIVE ALIGNMENT
11.1 Angular And Parallel
9
10
11
12
13
14

Drive misalignment is one of the most common sources of drive performance problems. Misaligned drives
can exhibit symptoms such as high belt tracking forces, uneven belt tooth wear, high noise levels, and tensile
cord failure. The two primary types of drive misalignment are angular and parallel. Discussion about each of
these types are as follows:

Angular: Angular misalignment
results when the drive shafts are not
parallel (see Figure 25). As a result, the
belt tensile cords are not loaded evenly,
resulting in uneven tooth/land pressure
and wear. The edge cords on the high
tension side are often overloaded which
may cause an edge cord failure that
propagates across the entire belt width.
Angular misalignment often results in
high belt-tracking forces as well which
cause accelerated belt edge wear,
15
16
T-32
Fig. 25 Angular Misalignment

sometimes leading to flange failure or

belts tracking off of the pulleys.

Parallel: Parallel misalignment
results from pulleys being mounted out
of line from each other (see Figure 26).
Parallel misalignment is generally more
of a concern with V-type belts than with
synchronous belts because V-type belts
run in grooves and are unable to free
Fig. 26 Parallel Misalignment
float on the pulleys. Synchronous belts
will generally free float on the pulleys and essentially self-align themselves as they run. This self-aligning
can occur as long as the pulleys have sufficient groove face width beyond the width of the belts. If not, the
belts can become trapped between opposite pulley flanges causing serious performance problems. Parallel
misalignment is not generally a significant concern with synchronous drives as long as the belts do not become
trapped or pinched between opposite flanges. For recommendations on groove face width, see Table 37, on
page T-75.

Allowable Misalignment: In order to maximize performance and reliability, synchronous drives should
be aligned closely. This is not, however, always a simple task in a production environment. The maximum
allowable misalignment, angular and parallel combined, is 1/4.
1
2
3
4
5
11.2 Practical Tips

Angular misalignment is not always easy to measure or quantify. It is sometimes helpful to use the
observed tracking characteristics of a belt, to make a judgment as to the system's relative alignment. Neutral
tracking "S" and "Z" synchronous belts generally tend to track "down hill" or to a state of lower tension or shorter
center distance when angularly misaligned. This may not always hold true since neutral tracking belts naturally
tend to ride lightly against either one flange or the other due to numerous factors discussed in the section on
belt tracking. This tendency will generally hold true with belts that track hard against a flange. In those cases,
the shafts will require adjustment to correct the problem.

Parallel misalignment is not often found to be a problem in synchronous belt drives. If clearance is always
observable between the belt and all flanges on one side, then parallel misalignment should not be a concern.
6
7
8
9
SECTION 12 INSTALLATION AND TAKE-UP

12.1 Installation Allowance

When designing a drive system for a manufactured product, allowance for belt installation must be built
into the system. While specific installation allowances could be published, as they are for larger industrial belt
drives, small synchronous drive applications are generally quite diverse, making it nearly impossible to arrive
at values that apply in all cases. When space is at a premium, the necessary installation allowance should be
determined experimentally using actual production parts for the best possible results.
10
11
12
12.2 Belt Installation

During the belt installation process, it is very important that the belt be fully seated in the pulley grooves
before applying final tension. Serpentine drives with multiple pulleys and drives with large pulleys are
particularly vulnerable to belt tensioning problems resulting from the belt teeth being only partially engaged
in the pulleys during installation. In order to prevent these problems, the belt installation tension should be
evenly distributed to all belt spans by rotating the system by hand. After confirming that belt teeth are properly
engaged in the pulley grooves, belt tension should be rechecked and verified. Failure to do this may result in
an undertensioned condition with the potential for belt ratcheting.
13
14
15
T-33
16

12.3 Belt Take-up

Synchronous belt drives generally require little if any retensioning when used in accordance with proper
design procedures. A small amount of belt tension decay can be expected within the first several hours of
operation. After this time, the belt tension should remain relatively stable.
1
2
3
12.4 Fixed Center Drives

Designers sometimes attempt to design synchronous belt drive systems without any means of belt
adjustment or take-up. This type of system is called a Fixed Center Drive. While this approach is often viewed
as being economical, and is simple for assemblers, it often results in troublesome reliability and performance
problems in the long run.

The primary pitfall in a fixed center design approach is failure to consider the effects of system tolerance
accumulation. Belts and pulleys are manufactured with industry accepted production tolerances. There are
limits to the accuracy that the center distance can be maintained on a production basis as well. The potential
effects of this tolerance accumulation is as follows:
Low Tension:
Long Belt with Small Pulleys on a Short Center Distance
High Tension:
Short Belt with Large Pulleys on a Long Center Distance

Belt tension in these two cases can vary by a factor of 3 or more with a standard fiberglass tensile cord.
This potential variation is great enough to overload bearings and shafting, as well as the belts themselves. The
probability of these extremes occurring is a matter of statistics, but however remote the chances may seem,
they will occur in a production setting. In power transmission drives, the appearance of either extreme is very
likely to impact drive system performance in a negative manner.

The most detrimental aspect of fixed center drives is generally the potentially high tension condition.
This condition can be avoided by adjusting the design center distance. A common approach in these designs
is to reduce the center distance from the exact calculated value by some small fraction. This results in a drive
system that is inherently loose, but one that has much less probability of yielding excessively high shaft loads.
NOTE: This approach should not be used for power transmission drives since the potentially loose operating
conditions could result in accelerated wear and belt ratcheting, even under nominal loading.

There are times when fixed center drive designs can't be avoided. In these cases, the following
recommendations will maximize the probability of success.

1. Do not use a fixed center design for power transmission drives. Consider using a fixed center design
only for lightly loaded or motion transfer applications.

2. Do not use a fixed center design for drives requiring high motion quality or registration precision.

3. When considering a fixed center design, the center distance must be held as accurately as possible,
typically within 0.002" 0.003" (0.05 mm 0.08 mm). This accuracy often requires the use of stamped
steel framework. Molding processes do not generally have the capacity to maintain the necessary
accuracy.

4. Pulleys for fixed center systems should be manufactured with a process that is capable of producing
the required O.D. tolerances accurately enough.

5. The performance capabilities of the drive system should be verified by testing belts produced over
their full length tolerance range on drive systems representing the full potential center-distance
variation.
7
8
9
10
11
12
13
14
15
16
T-34

SECTION 13 IDLER USAGE

Idlers in synchronous belt drives are commonly used to take up belt slack, apply installation tension or to
clear obstructions within a system. While idlers cause additional belt bending, resulting in fatigue, this effect is
generally not significant as long as proper design procedures are followed. Synchronous belts elongate very
little over time, making them relatively maintenance free. All idlers should be capable of being locked down
after being adjusted and should require little additional attention. Specific guidelines and recommendations
are given below.
13.1 Inside/Outside

Inside idlers are generally preferred over backside idlers from a belt fatigue standpoint. Both are
commonly used with good success. Inside idlers should be pulleys, but can be flat, if the O.D. is equivalent to
the pitch diameter of a 40-groove pulley. Backside idlers should be flat and uncrowned.
T
1
2
3
13.2 Tight Side/Slack Side

Idlers should be placed on the slack (or nonload-carrying) side, if possible. Their effect on belt fatigue
is less on the slack side than on the tight (or load-carrying) side. If spring-loaded idlers are used, they should
never be placed on the tight side (see Spring-Loaded Idlers). Also, note that drive direction reversals cause
the tight and slack spans to reverse, potentially placing the idler on the tight side.
4
5
13.3 Idler Placement

In synchronous belt drives, idlers can be placed nearly anywhere they are needed. Synchronous drives
are much less sensitive to idler placement and belt wrap angles than V-belt drives. The designer should make
sure that at least 6 belt teeth are in mesh on load-carrying pulleys. For every tooth in mesh less than this (with
a minimum of 2), 20% of the belt torque rating must be subtracted. In order to minimize the potential for belt
ratcheting, each loaded pulley in the system should also have a wrap angle of at least 60. If a loaded pulley
has less than 6 teeth in mesh and 60 of wrap, idlers can often be used to improve this condition. Nonloaded
idler pulleys do not have tooth meshing or wrap angle restriction.
6
7
8
13.4 Spring-Loaded Idlers

Using a spring to apply a predetermined force against a tensioning idler to obtain proper belt installation
tension is acceptable as long as the idler can be locked down after belt installation.

Dynamic spring-loaded idlers are generally not recommended for synchronous belt drives. If used,
spring-loaded belt idlers should never be used on the tight (or load-carrying) side. Tight side tensions vary with
the magnitude and type of load carried by the system. High tight side tensions can overcome the idler spring
force allowing the belt to ratchet. In order to prevent this from occurring, an excessively high spring force is
required. This high spring force can result in high shaft/bearing loads and accelerated belt wear.

If dynamic spring-loaded idlers are to be used, they should be used on the slack (or nonload-carrying)
side of the drive. Potential drive loading variations in the system will have the least possible impact on idler
movement due to spring compression with the idler placed in this way. Be sure to note that the tight and slack
spans shift as the direction of drive rotation reverses. This could place the spring-loaded idler on the tight side.
In some cases, drive vibration and harmonic problems may also be encountered with the use of spring-loaded
idlers.
9
10
11
12
13.5 Size Recommendations
13

Inside idler pulleys can be used in the minimum recommended size for each particular belt pitch. Inside
flat idlers can be used on the tooth side of synchronous belts as long as they are of a diameter equivalent to
14
15
T-35
16

R
T
1
2
3
4
5
6
7
8
9
10
11
12
13
14
13.5 Size Recommendations (Continued)

the pitch diameter of a 40-groove pulley in the same pitch. Drives with inside flat idlers should be tested, as
noise and belt wear may occur. Flat backside idlers should be used with diameters at least 30% larger than
the minimum recommended inside pulley size.

Table 11 summarizes our idler size recommendations.
Table 11 Idler Size Recommendations
Belt Type
Minimum
Inside Idler
MXL
XL
3 mm HTD
5 mm HTD
2 mm GT2
3 mm GT2
5 mm GT2
T2.5
T5
T10
12 grooves
12 grooves
12 grooves
14 grooves
12 grooves
12 grooves
14 grooves
14* or 16 grooves
14* or 16 grooves
16* or 18 grooves
inch
mm
inch
mm
0.50
1.00
0.75
1.25
0.50
0.75
1.25
.57* or .66
1.15* or 1.31
2.64* or 2.94
12.7
25.4
19.1
31.8
12.7
19.1
31.8
14.6* or 16.7
29.2* or 33.3
67* or 74.7
1.00
2.50
1.50
2.50
1.00
1.50
2.50
1.26
2.51
5.02
25.4
63.5
38.1
63.5
25.4
38.1
63.5
31.9
63.85
127.45
* Above 1200 rpm, Below 1200 rpm
13.6 Specifying Shaft Locations In Multipoint Drive Layouts

When collecting geometrical layout data for multiple pulley drive layouts, it is important to use a standard
approach that is readily understood and usable for drive design calculations. This is of particular importance
when the data will be provided to our Application Engineering Department for analysis.

2-Point Drive

When working with a simple 2-point drive (driver/driven only) it is sufficient to specify the desired
distance between shaft centers for belt length calculations.

3-Point Drive

When working with a 3-point drive (driver/driven/idler), X-Y coordinates are desirable. It is sufficient,
however, to specify desired center distances between each of the three shaft centers to form a triangle. In
either case, pulley/idler movement details for belt tensioning and take up are also necessary.

Multi-Point Drive

When working with a drive system having more
than 3 shafts, the geometrical layout data must be
collected in terms of X-Y coordinates for analysis. For
those unfamiliar with X-Y coordinates, the X-Y Cartesian
coordinate system is commonly used in mathematical
and engineering calculations and utilizes a horizontal
and vertical axis as illustrated in Figure 27.

The axes cross at the zero point, or origin. Along
the horizontal, or "X" axis, all values to the right of the
zero point are positive, and all values to the left of the
zero point are negative. Along the vertical, or "Y" axis, all
values above the zero point are positive, and all values
below the zero point are negative. This is also illustrated
in Figure 27.
15
16
Minimum Inside
Flat Idler O.D.
Minimum Backside Idler O.D.
T-36
10
8
6
4
2
-10 -8 -6 -4 -2
-2
8 10
-4
-6
-8
-10
Fig. 27 Cartesian Coordinate System


When identifying a shaft center location, each X-Y coordinate is specified with a measurement in the "X"
as well as the "Y" direction. This requires a horizontal and vertical measurement for each shaft center in order
to establish a complete coordinate. Either English or Metric units of measurement may be used.

A complete coordinate is specified as follows:

(X, Y)
(13-1)
where: X = measurement along X-axis (horizontal)

Y = measurement along Y-axis (vertical)

In specifying X and Y coordinates for each shaft center, the origin (zero point) must first be chosen as a
reference. The driver shaft most often serves this purpose, but any shaft center can be used. Measurements
for all remaining shaft centers must be taken from this origin or reference point. The origin is specified as (0,
0).

An example layout of a 5-point drive
system is illustrated in Figure 28. Here,
Y
each of the five shaft centers are located
and identified on the X-Y coordinate grid.
10

When specifying parameters for
the movable or adjustable shaft (for belt
(-4,7)
8
installation and tensioning), the following
approaches are generally used:
6
4

Fixed Location: Specify the
nominal shaft location coordinate with a
movement direction.

Slotted Location: Specify a location
coordinate for the beginning of the slot,
and a location coordinate for the end of
the slot along its path of linear movement.
(0,0)
-10

Pivoted Location: Specify the initial
shaft location coordinate along with a
pivot point location coordinate and the
pivot radius.

Performing belt length and idler
movement/positioning calculations by
hand can be quite difficult and time
consuming. With a complete geometrical
drive description, we can make the drive
design and layout process quite simple
for you.
-8
-6
-4
-2
-2
3
4
5
6
(2,2)
(8,0)
6
10
(3,-1)
-4
-6
-8
-10
Fig. 28 Example of 5-Point Drive System
10
11
12
SECTION 14 BELT PULL AND BEARING LOADS

Synchronous belt drives are capable of exerting lower shaft loads than V-belt drives in some
circumstances. If pre-tensioned according to SDP/SI recommendations for a fully loaded steady state
condition, synchronous and V-belt drives will generate comparable shaft loads. If the actual torque loads are
reduced and the level of pre-tension remains the same, they will continue to exert comparable shaft loads. In
some cases, synchronous belts can be pre-tensioned for less than full loads, under nonsteady state conditions,
13
14
15
T-37
16

R
T
1
2
3
4
5
6
7
8
9
10
11
12
13
with reasonable results. Reduced pre-tensioning in synchronous belts can be warranted in a system that
operates with uniform loads most of the time, but generates peak loads on an intermittent basis. While V-belt
drives require pre-tensioning based upon peak loads to prevent slippage, synchronous drive pre-tensioning
can be based upon lower average loads rather than intermittent peak loads, as long as the belt does not ratchet
under the peak loads. When the higher peak loads are carried by the synchronous drive, the belt will selfgenerate tension as needed to carry the load. The process of self-tensioning results in the belt teeth riding out
of the pulley grooves as the belt enters the driven pulley on the slack side, resulting in increased belt tooth and
pulley wear. As long as peak loads occur intermittently and belts do not ratchet, reduced installation tension
will result in reduced average belt pull without serious detrimental effects. Synchronous belts generally require
less pretension than V-belts for the same load. They do not require additional installation tension for belt wrap
less than 180 degrees on loaded pulleys as V-belt drives do. In most cases, these factors contribute to lower
static and dynamic shaft loads in synchronous belt drives.

Designers often wish to calculate how much force a belt drive will exert on the shafting/ bearings/
framework in order to properly design their system. It is difficult to make accurate belt pull calculations
because factors such as torque load variation, installation tension and pulley runout all have a significant
influence. Estimations, however, can be made as follows:
14.1 Motion Transfer Drives

Motion transfer drives, by definition, do not carry a significant torque load. As a result, the belt pull is
dependent only on the installation tension. Because installation tensions are provided on a per span basis, the
total belt pull can be calculated by vector addition.
14.2 Power Transmission Drives

Torque load and installation tension both influence the belt pull in power transmission drives. The level of
installation tension influences the dynamic tension ratio of the belt spans. The tension ratio is defined as the
tight side (or load carrying) tension TT divided by the slack side (or nonload carrying) tension TS. Synchronous
belt drives are generally pre-tensioned to operate dynamically at a 5:1 tension ratio in order to provide the
best possible performance. After running for a short time, this ratio is known to increase somewhat as the belt
runs in and seats with the pulleys, reducing tension. Equations (14-1) and (14-2) can be used to calculate the
estimated TT and TS tensions assuming a 5:1 tension ratio. TT and TS tensions can then be summed into a single
vector force and direction.

2.5 (Q)

TT = (lbf)
(14-1)
Pd
T
Tight Side - T

0.5 (Q)
Parallel to

TS = (lbf)
(14-2)
TS
Pd
TT
Parallel
elt Pull
where: TT = Tight side tension (lbf)

TS = Slack side tension (lbf)

Q = Torque Load (lbf in.)
Motor

Pd = Pitch diameter (in.)

If both direction and magnitude of belt
pull are required, the vector sum of TT and
TS can be found by graphical vector addition
as shown in Figure 29. TT and TS vectors are
drawn parallel to the tight and slack sides at a
convenient scale. The magnitude and direction
of the resultant vector, or belt pull, can then be
measured graphically.
14
15
16
T-38
Resultant
TS
Parallel
Parallel to
TT
Slack Side - T
Fig. 29 Belt Pull Vector Diagram

The same procedures can be used for finding belt pull on the driven shaft. This method can also be used for
drives using three or more pulleys or idlers.

For two pulley drives, belt pull on the driver and driven shafts is equal but opposite in direction. For drives
using idlers, both magnitude and direction may be different. If only the magnitude of the belt pull is needed in
a two pulley drive, use the following procedure:

1.6
Vector Sum Correction Factor
1. Add TT and TS
2. Using the value of (D d )/C for the
drive, find the vector sum correction
factor using Figure 30. Or, use the
known arc of contact on the small
pulley, where: D = large diameter

d = small diameter

C = center distance

3. Multiply the sum of TT and TS by the
vector sum correction factor to find
the vector sum, or belt pull.

For drives using idlers, either use the
graphical method or contact our Application
Engineering Department for assistance.
1.4
D-d
C
1.2
1.0
0.8
0.6
0.4
0.2
R
T
1
1.0
0.9
0.8
0.7
0.6
0.5
60
70
80
90 100 110 120 130 140 150 160

Arc of Contact on Small Pulley (degrees)
170
180
Fig. 30 Vector Sum Correction Factor
14.3 Registration Drives

Synchronous belt drives used for purposes of accurate registration or synchronization generally require
the use of higher than normal installation tensions (see section on Belt Tensioning). These drives will operate
with higher belt pulls than normal power transmission drives. Belt pull values for these types of applications
should be verified experimentally, but can be estimated by adding the installation tension in each belt span
vectorially.
14.4 Bearing Load Calculations

In order to find actual bearing loads, it is necessary to know the weights of machine components
and the value of all other forces contributing to the load. However, sometimes it helps to know the bearing
load contributed by the belt drive alone. The resulting bearing load due to belt pull can be calculated if both
bearing spacing with respect to the pulley center and the belt pull are known. For approximate bearing load
calculations, machine designers use belt pull and ignore pulley weight forces. If more accurate bearing load
calculations are needed, or if the pulley is unusually heavy, the actual shaft load (including pulley weight)
should be used.
a
b
Pulley

A. Overhung Pulleys (See Figure 31)

Fb
B1 =
(14-3)

a
F (a + b)
B2 = (14-4)

a

B. Pulley Between Bearings (See Figure 32)

Fd
B1 =
(c + d)
(14-5)

Fc
B2 =
(c + d)
(14-6)
Shaft
Bearing
Load
B1
Bearing
Load
B2
Shaft
Load
F
Fig. 31 Overhung Pulley
Shaft
Load
F
9
10
11
13
Shaft
Bearing
Load
B1
12
d
Pulley
Bearing
Load
B2
Fig. 32 Pulley Between Bearings

T-39
14
15
16

R
T
1
2
3
4
5
6
SECTION 15 HANDLING AND STORAGE

The following has been condensed from RMA Bulletin No. IP-3-4: "Storage of Power Transmission Belts":

Recommendations for proper belt storage is of interest to designers as well as to users.
Under favorable storage conditions, high-quality belts maintain their performance capabilities and
manufactured dimensions. Good storage conditions and practices will result in the best value from belt
products.

Power transmission belts should ideally be stored in a cool and dry environment. Excess weight against
belts resulting in distortion should be avoided. Avoid storing belts in environments that may allow exposure
to sunlight, moisture, excessive heat, ozone, or where evaporating solvents or other chemicals are present.
Belts have been found to be capable of withstanding storage, without changing significantly, for as long as
8 years at temperatures less than 85 F (30 C) and relative humidity below 70 percent without direct contact
with sunlight.

Proper handling of synchronous belts is also important in preventing damage that could reduce their
performance capabilities. Synchronous belts should never be crimped or tightly bent. Belts should not be bent
tighter than the minimum recommended pulley size specified for each belt section, or pitch. Belt backside
bending should be limited to the values specified in Table 11 for a minimum diameter backside idler.
SECTION 16 STANDARDS APPLICABLE TO BELTS

Different belt tooth configurations are shown in Figure 19 and their characteristics are described in
Table 3, both on page T-15. Since synchronous belts are manufactured by several manufacturers, each has
established individual standards. Subsequently, the following general standards have been published:

1. Specifications by the Rubber Manufacturers Association for Drives using Synchronous Belts.
2. Synchronous Belt Drives specification by the International Organization for Standardization.

Based on these, as well as standards developed by belt manufacturers, the following information is
presented in this handbook:
9
10
11
12
13
Recommended Tension for Length Measurement.................................................................Table 12

Belt Width Tolerances................................................................................................................Table 13
Pitch Length Tolerances.............................................................................................................Table 14
Center Distance Tolerances......................................................................................................Table 15
Overall Belt Thickness dimensions...........................................................................................Table 16
Overall Belt Thickness Tolerances...........................................................................................Table 17
NB = Number of Teeth
Length Measurement
Np = Number of Grooves
of Belt
of Pulley

The pitch length of a synchronous belt is
determined by placing the belt on a measuring
fixture comprising two pulleys of equal diameter,
applying tension and measuring the center
Total
distance between the two pulleys. One of the
Measuring
pulleys is fixed in position, while the other is
Force
movable along a graduated scale.

The fixture is shown schematically in
Figure 33. Any pair of equal-diameter pulleys of the
Center
proper pitch and manufactured to specifications may
Distance
be used for measuring. The measuring tension is
Fig. 33 Length Measuring Fixture
given in Table 11.
14
15
16
T-40

Recommended Tension for

In measuring the length of a synchronous belt, the belt Table 12
Length Measurement
should be rotated at least two revolutions to seat it properly
Total Measuring Tension
and to divide the tension equally between the two spans.

The pitch length is calculated by adding the pitch
Belt Width
Measuring Force
circumference of one pulley to twice the center distance:
mm
in.
lbf
N
0.25
6.4
8
36

Belt Pitch Length = 2 C + (NPulley x Pitch)
0.31
7.9
10
44

Pitch (NBelt NPulley)
0.37
9.5
12
53

C =
0.50
12.7
24
105

2
0.75
19.1
40
180
1.00
25.4
55
245
where C is the Center Distance expressed in same units as
the Pitch.
MXL (0.080)
XL (0.200)
L (0.375)
012
019
025
025
037
050
075
100
Belt Pitch Length

in.
Up to
10
From 10
To
15
From 15
To
20
From 20
To
30
From 30
To
40
From 40
To
50
From 50
To
60
From 60
To 70
mm
Up to
254
From 254
To
381
From 381
To
508
From 508
To
762
From 762
To
1016
From 1016
To
1270
From 1270
To
1524
From 1524
To
1778
Dimensions
mm
3.2
4.8
6.4
6.4
9.7
12.7
19.1
25.4
1
2
Tolerance on Width for Belt Pitch Lengths
Standard Belt Width

Designation
Table 13 Belt Width Tolerances

Belt
Selection
in.
0.12
0.19
0.25
0.25
0.38
0.50
0.75
1.00
Up to and
Including
838 mm (33 in.)
mm
in.
Over 838 mm (33 in.)

Up to and Including
1676 mm (66 in.)
in.
mm
Over 1676 mm
(66 in.)
mm
in.
+0.5
-0.8
0.020
0.031
+0.4
-0.8
+0.016
-0.031
+0.5
-0.8
0.020
0.031
+0.8
-1.2
+0.031
-0.047
+0.031
-0.047
+0.8
-1.2
+0.8
-0.8
0.031
0.031
+0.03
-0.05
+0.8
-1.3
+1.2
-1.6
+0.047
-0.063
Table 14 Pitch Length Tolerances

Permissible Deviation
Permissible Deviation
Belt Pitch Length
from Standard
from Standard
mm
mm
mm
in.
in.
in.
From 70 From 1778
0.016
0.40
0.036
0.91
To
80 To 2032
From 80 From 2032
0.018
0.46
0.038
0.96
To
90 To 2286
From 90 From 2286
0.020
0.51
0.040
1.02
To 100 To 2540
From 100 From 2540
0.024
0.61
0.044
1.12
To 120 To 3084
From 120 From 3084
0.026
0.66
0.048
1.22
To 140 To 3556
From 140 From 3556
0.030
0.76
0.052
1.32
To 160 To 4064
From 160 From 4064
0.032
0.81
0.054
1.37
To 170 To 4318
From 170 From 4318
0.034
0.86
0.058
1.47
To 180 To 4572
4
5
6
7
8
9
10
11
12
13
14
15
T-41
16

Table 15 Center Distance Tolerances

Center Distance
Tolerance
inches
mm
Belt Length
inches
Up to
1
2
3
4
5
6
7
8
9
10
11
12
13
14
mm
10
Over
10
To
15
Over
15
To
20
Over
20
To
30
Over
30
To
40
Over
40
To
50
Over
50
To
60
Over
60
To
70
Over
70
To
80
Over
80
To
90
Over
90
To 100
Over 100
To 110
Over 110
To 120
254
Over
254
To
381
Over
381
To
508
Over
508
To
762
Over
762
To 1016
Over 1016
To 1270
Over 1270
To 1524
Over 1524
To 1778
Over 1778
To 2032
Over 2032
To 2286
Over 2286
To 2540
Over 2540
To 2794
Over 2794
To 3048
.008
.20
.009
.23
.010
.25
.012
.30
.013
.33
.015
.38
.016
.41
.017
.43
.018
.46
.019
.48
.020
.51
.021
.53
.022
.56
Belt Type
Belt Pitch
MXL
40 D.P.
XL
3 mm HTD
5 mm HTD
2 mm GT
3 mm GT
5 mm GT
T2.5
T5
T10
.080"
.0816"
.200"
3 mm
5 mm
2 mm
3 mm
5 mm
2.5 mm
5 mm
10 mm
Overall Thickness
(ref.)
inches
mm
.045
1.14
.045
1.14
.090
2.29
.095
2.41
.150
3.81
.060
1.52
.095
2.41
.150
3.81
.051
1.3
.087
2.2
.177
4.5
Table 17 Overall Belt Thickness Tolerances

Standard
0.015"
0.38 mm
Class 2
0.010"
0.25 mm
Class 1
0.005"
0.13 mm
NOTE 1:
Belts with pitch lengths greater than 5.5"

(140 mm) are furnished with a Class 2 grind
unless otherwise specified. Belts with pitch
lengths less than 5.5" (140 mm) are unground
and produced to standard tolerances.
NOTE 2:
A Class 1 grind is available at additional cost

for finished belts only.
SECTION 17 STANDARDS APPLICABLE TO PULLEYS AND FLANGES

Pulleys are components manufactured to close tolerances in order to achieve best performance and
long belt life. They are available in finished form or as bar stock which can be used for in-house manufacture
of prototypes or smaller quantities.

For an uninitiated observer, a pulley may appear simply as a component with some trapezoidal or
curvilinear grooves. In fact, the efficiency and integrity of a belt drive is closely attributed to the quality of
pulleys involved. The pulleys, therefore, should be supplied by qualified and licensed suppliers. In case of HTD
and GT drives, the suppliers must be licensed by the Gates Rubber Company. Stock Drive Products is one of
such licensed full line suppliers.

To achieve the reproduction of the correct pulley profile, licensed hobs are used. The following inspection
and design aids are used as well:

Master Profile: A scaled line drawing of the ideal groove profile with tolerance bands plotted on
dimensionally stable translucent material. Suitable for groove inspection purposes on an optical comparator.

Dimensional Profile Drawing: A line drawing of the ideal groove profile with all arcs and radii defined.
Suitable for mold design.

Digitized Points: A series of X and Y coordinates defining the ideal groove profile. Available in printed
form. Suitable for mold design.
15
16
Up to
Table 16 Overall Belt Thickness Dimensions
T-42


Tolerancing/Inspection Procedure: A typical
pulley groove tolerance band is illustrated in Figure
34. Groove inspection must be made on an optical
comparator at a specified magnification. The actual
pulley groove profile must fit within the specified
tolerance bands without any sharp transition or
undercuts.
T
1
17.1 Pulley Tolerances

Stock Drive Products has accepted,as a minimum
requirement, the Engineering Standards recommended
by the Mechanical Power Transmission Association. The
Rubber Manufacturers Association, Inc. (RMA), the Rubber
Association of Canada and the Gates Rubber Company
= Tolerance Band
standards are approved by the Technical Committee of the
= Ideal Groove Profile
above associations. These standards are in substantial
Fig. 34 Typical Pulley Groove
compliance with standards developed by the International
Tolerance Band
Organization for Standardization (ISO).
Requirements of some belt manufacturers exceed those of RMA and ISO. Whenever practicable,
Stock Drive Products adheres to those specifications which are more stringent.
The following tables contain the applicable tolerances:
The following definitions are being used when considering quality of pulleys:
Table 18 Pulley O.D. Tolerances
Pulley O.D.
inches
mm
Up to
Up to
25.4
Over
To
Over
To
Over
To
Over
To
Over
To
1
2
2
4
4
7
7
12
12
20
Over
20 Over 508.0
Over
25.4
To
50.8
Over
50.8
To 101.6
Over 101.6
To 177.8
Over 177.8
To 304.8
Over 304.8
To 508.0
Pulley
O.D. Tolerances
inches
mm
+.05
+.002
.00
.000
+.08
+.003
.00
.000
+.10
+.004
.00
.000
+.13
+.005
.00
.000
+.15
+.006
.00
.000
+.18
+.007
.00
.000
+.20
+.008
.00
.000
inches
Total Eccentricity
Total Indicator Reading
inches
mm
mm
Up to 2
Up to
50
Over 2
To 4
Over 4
To 8
Over
50
To 100
Over 100
To 200
Over 8
Over 200
3
4
5
6
Table 19 Pulley Eccentricity

Outside Diameter
0.0025
0.06
0.0030
0.08
0.0040
0.10
.0005"/inch
.013/mm O.D.
O.D. > 8"
O.D.> 200mm
(may not exceed
face diameter tolerance)
7
8
9
10
11

Eccentricity: The allowable amount of radial run out from the pulley bore to the O.D. is shown in
Table 19.

Helix Angle: Grooves should be parallel to the axis of the bore within 0.001" per inch (0.025 mm per 25.4
mm) of pulley groove face width.

Draft: The maximum permissible draft on the groove form is 0.001" per inch (0.025 mm per 25.4 mm) of
face width and must not exceed the O.D. tolerance.
12
13
14
15
T-43
16

R
T
1
2
3
4
5
6
7
8

Parallelism: The bore of the pulley
is to be perpendicular to the vertical
faces of the pulley within 0.001" per
inch (0.025 mm per 25.4 mm) of diameter
with a maximum of 0.020" (0.51 mm) total
indicator reading.

Pitch Accuracy: Adequate pitch to
pitch accuracy is generally more difficult
to achieve with molded pulleys than
with machined pulleys. Recommended
tolerances are listed in Table 21.

Balancing: Balancing is often not
required on machined metal pulleys. All
pulleys should be statically balanced
to 1/8 oz. (3.5 grams) in all sizes. Drives
exceeding 6500 ft./min. (33m/s) may
require special materials, and should be
dynamically balanced to 1/4 ozf in.
(1.78 Nmm).

Production pulleys should be made
as closely to these tolerances as possible
in order to maximize drive performance.

In addition to the Tables 19, 20
and 21 which define the tolerances
related to pulleys manufactured by
SDP/SI, Tables 22 through 25 are given
for reference only, as published by
ISO (International Organization for
Standardization) and RMA (Rubber
Manufacturers Association).
9
in.
To 1
To 2.54
1 to 2
25.4 to 50.8
2 to 3
50.8 to 76.2
3 up
76.2 up
Bore Tolerance
in.
mm
+.0010
+0.025
-.0000
-0.000
+.0015
+0.038
-.0000
-0.000
+.0020
+0.051
-.0000
-0.000
+.0025
+0.064
-.0000
-0.000
Table 21 Pulley Pitch Accuracy

in.
Up to
Pitch to Pitch
in.
mm
mm
1.0
Up to
25.4
Over 1.0
To
2.0
Over 2.0
To
4.0
Over 4.0
To
7.0
Over 7.0
To 12.0
Over 12.0
To 20.0
Over 25.4
To
50.8
Over 50.8
To 101.6
Over 101.6
To 177.8
Over 177.8
To 304.8
Over 304.8
To 508.0
Over 20.0
Over 508.0
Accumulative *
in.
mm
.001
0.025
.001
0.025
.001
0.025
.001
0.025
.001
0.025
.001
0.025
.001
0.025
.001
0.025
.001
0.025
.001
0.025
.001
0.025
.001
0.025
.001
0.025
.001
0.025
* Over 90
Total Indicator Reading (max.)

mm
in.
mm
4.000
101.60
.004
0.10
> 4.000 10.000
> 101.60 254.00
.001/in. of O.D.
0.001/mm of O.D.
> 10.000
> 254.00
.010 + .0005/in. of O.D.

over 10.000"
0.25 + 0.0005/mm of O.D.

over 254.00 mm
Table 23 ISO Radial Pulley Runout

Outside Diameter Range
13
Total Indicator Reading (max.)
in.
mm
in.
mm
8.000
203.20
.005
0.13
> 8.000
> 203.20
.005 + .0005/in. of O.D.

over 8.000
0.13 + 0.0005/mm of O.D.

over 203.20 mm
15
16
mm
Table 22 ISO Axial Pulley Runout
12
14
in.
Bore
Outside Diameter Range
10
11
Table 20 Bore Tolerance for Pulleys

Bore
T-44

Table 24 ISO Pulley O.D. Tolerances

Outside Diameter
Tolerances
in.
mm
in.
mm
1.000
25.40
+.002 /-.000
+0.05 / 0
> 1.000 2.000
> 25.40 50.80
+.003 /-.000
+0.08 / 0
> 2.000 4.000
> 50.80 101.60
+.004 /-.000
+0.10 / 0
> 4.000 7.000
> 101.60 177.80
+.005 /-.000
+0.13 / 0
> 7.000 12.000
> 177.80 304.80
+.006 /-.000
+0.15 / 0
> 12.000 20.000
> 304.80 508.00
+.007 /-.000
+0.18 / 0
> 20.000
> 508.00
+.008 /-.000
+0.20 / 0
T
1
2
3
Table 25 RMA Pulley Bore Tolerances

Up thru
.75 (19)
Over .75
(19)
to and
including
1.00 (25.4)
Over 1.00
(25.4)
to and
including
1.25 (31.8)
+.0015
+.0005
+0.038
+0.013
+.0015
+.0005
+0.038
+0.013
+.0015
+.0005
+0.038
+0.013
+.0015
+.0005
+0.038
+0.013
+.0015
+.0005
+0.038
+0.013
+.0015
+.0005
+0.038
+0.013
+.0015
+.0005
+0.038
+0.013
+.0015
+.0005
+0.038
+0.013
+.0020
+.0005
+0.051
+0.013
Length
Diameter
of Bore
Up thru
0.50 (12.7)
Over 0.50
(12.7)
to and
including
1.00 (25.4)
Over 1.00
(25.4)
to and
including
1.50 (38.1)
Over 1.50
(38.1)
to and
including
2.00 (50.8)
Over 1.25
(31.8)
to and
including
1.50 (38.1)
Over 1.50
(38.1)
to and
including
2.00 (50.8)
Over 2.00
(50.8)
to and
including
2.50 (63.5)
Over 2.50
(63.5)
to and
including
3.00 (76.2)
Tolerances
)
)
)
)
)
)
)
)
)
Over 2.00
(50.8)
to and
including
2.50 (63.5)
+.0015
+.0005
+0.038
+0.013
+.0015
+.0005
+0.038
+0.013
+.0015
+.0005
+0.038
+0.013
+.0020
+.0005
+0.051
+0.013
+.0020
+.0005
+0.051
+0.013
)
)
)
)
)
+.0015
+.0005
+0.038
+0.013
+.0020
+.0005
+0.051
+0.013
+.0020
+.0010
+0.051
+0.025
+.0025
+.0010
+0.064
+0.025
+.0025
+.0010
+0.064
+0.025
4
5
6
)
)
)
)
)
+.0020
+.0005
+0.051
+0.013
+.0020
+.0010
+0.051
+0.025
+.0025
+.0010
+0.064
+0.025
+.0025
+.0010
+0.064
+0.025
) (
+.0020
+.0005
+0.051
+0.013
) (
+.0020
+.0010
+0.051
+0.025
) (
+.0025
+.0010
+0.064
+0.025
) (
+.0025
+.0010
+0.064
+0.025
NOTE: Dimensions in ( ) are in mm, all others are in inches.
8
9
10
11
12
13
14
15
T-45
16

17.2 Pulley Materials

There is a wide variety of materials and manufacturing processes available for the production of
synchronous belt pulleys. In selecting an appropriate material and production process, the designer should
consider dimensional accuracy, material strength, durability and production quantity. Some broad guidelines
and recommendations are as follows:
1
2
3
4
5

1. Machining

Excellent dimensional accuracy. Economical for low to moderate production quantities.

Typical materials:
Steel Excellent wear resistance.
Aluminum Good wear resistance; pulleys for power transmission drives should be hard

anodized.

2. Powdered Metal and Die Casting

Good dimensional accuracy. Economical for moderate to high production quantities.

Typical materials:
Sintered Iron Excellent wear resistance.
Sintered Aluminum Good wear resistance; lightweight and corrosion resistant.
Zinc Die Cast Good wear resistance.

3. Plastic Molding

Good dimensional accuracy. Economical for high production quantities. Best suited for light to moderate
torque loads. Fiber loading improves overall material strength and dimensional stability. However, increased
belt wear can result from the presence of sharp abrasive fiber ends on the finished surface.

Assistance for total drive system design is available.
Please contact our Application Engineering Department.
17.3 Flange Design And Face Width Guidelines

Figure 35 illustrates the expressions used in flange and pulley design. Tables 26 and 27 pertain to flange
dimensions and pulley face widths respectively.
9
10
16 8 Nominal
No sharp corners
Flange
Outside
Diameter
Flange
Height
Face Width
11
Sprocket
Outside
Diameter
12
Sprocket
Groove
13
Fig. 35 Expressions Used in Flange and Pulley Design
14
15
16
T-46
Face Width

Table 26
Nominal Flange Dimensions for Molding, Sintering, Casting, etc.

Belt
Type
MXL
XL
2 mm GT2
3 mm GT2 & HTD
5 mm GT2 & HTD
Minimum Flange Height

inches
mm
0.040
0.060
0.043
1.10
0.067
1.70
0.091
2.20
Nominal Flange Height

inches
mm
0.050
0.080
0.059
1.50
0.098
2.50
0.150
3.80
T
1
Table 27 Additional Amount of Face Width Recommended over Nominal Belt Width *
Belt
Type
MXL
XL
2 mm GT2
3 mm GT2 & HTD
5 mm GT2 & HTD
Nom. Face Width Unflanged

inches
mm
+0.125
+0.190
+0.118
+3.00
+0.157
+4.00
+0.197
+5.00
Nom. Face Width Flanged

mm
inches
+0.040
+0.060
+0.039
+1.00
+0.049
+1.25
+0.059
+1.50
2
3
4
* Add Table Values to Nominal Belt Width for Nominal Face Width
17.4 Guidelines For GT 2 Flange Design

In some instances, special pulleys are used which are made from pulley stock. The following guidelines
are given to establish the design parameters for flanges which would fit these special pulleys. If possible,
standard available flanges should be used to avoid tooling charges associated with production of special sized
flanges.
Nominal GT2
Groove Depths
Flange Root
Seat Dia.
Dia.
Pulley Flanged
Finished O.D.
O.D.
2 mm .030" (0.76 mm)

3 mm .045" (1.14 mm)
5 mm .076" (1.93 mm)
6
7
8
GT2 Pitch Factors
2 mm .016" (0.41 mm)

3 mm .050" (1.27 mm)
5 mm .070" (1.78 mm)
10
11
Figure 36 Terms Used for Timing Pulley Flange Design

Steps:
1. Determine pulley size and finished O.D.
2. Determine root diameter (Root Diameter = Finished O.D. 2 x Nominal Groove Depth).
See Figure 19, page T-15.

3. Determine maximum flange seat diameter.
(Maximum Flange Seat Diameter = Root Diameter Pitch Factor).

4. Select flange with inside diameter less than maximum flange seat diameter
(see available flange sizes in the product section).

5. Determine flange seat diameter (Flange Seat Diameter = Flange I.D. +.000" .003")

6. Determine flange seat width (Flange Seat Width = Flange Gauge + .020" .005";
see available flange sizes).

7. Flanges can be rolled, staked or punched on.
12
13
14
15
T-47
16

R
T
1
2
3
4
5
6
7
8
9
10
11
12
SECTION 18 DOUBLE-SIDED BELT TOLERANCES

This type of belt was introduced briefly in Section 5.1, page T-10. As previously described, this type of
belt has teeth on both sides to provide synchronization from both driving surfaces. This special feature makes
possible unique drive designs, such as multipoint drives, rotation reversal with one belt, serpentine drives, etc.
It may also provide solutions to other difficult design problems.

Double-Sided Belts are similar in construction to regular synchronous belts, including nylon-faced teeth
on both sides. This construction uses essentially the same design parameters as standard synchronous belts.
Their torque ratings are the same as conventional PowerGrip Belts of identical pitch and width.

Double-Sided Belts are available in MXL, XL, L, 3 and 5 mm HTD and T5 and T10 pitches from stock. See
"Timing Belts and Pulleys Locator Charts" in the product section.

Double-Sided Construction

Tensile members of the PowerGrip DoubleSided Belt are helically-wound fiberglass cords
providing the same load-carrying capacity as single
sided PowerGrip belts. The body is Neoprene rubber
providing oil and weather resistance and protection
for the fiberglass cords. Both sides of the belt have
a specially treated nylon tooth facing that provides a
tough wear-resistant surface with minimal friction.

Double-Sided Tolerances

Since Double-Sided Belts are manufactured
and cut to the required width by the same method as
standard PowerGrip belts, the same manufacturing
tolerances apply, except for the thickness and center
distance tolerances listed in Tables 28 and 29.

Overall thickness, opposing teeth symmetry
and pitch line symmetry are closely controlled during
Double-Sided Belt manufacture.

Specifying Double-Sided Belts

The available Double-Sided Belts and other
double-sided belts from stock can be found from the
Timing Belt Locator Chart, on page 2-2 of the product
section.

Double-Sided Drive Selection

Double-Sided Belts can transmit 100% of their
maximum rated load from either side of the belt or in
combination where the sum of the loads exerted on
both sides does not exceed the maximum rating of the
belt. For example, a Double-Sided Belt rated at 6 lbf in.
could be used with 50% of the maximum rated on one
side, and 50% on the other; or 90% on one side, and
10% on the other.
W
T
Fig. 37 Double-Sided Belt Tolerances

Table 28 Belt Thickness Tolerances
W (in.) Ref.
Belt
T (in.)
.020
.120 .007
XL (.200")
.030
.126 .006
3 mm HTD
.045
.209 .007
5 mm HTD
.020
.060 .004
MXL
.030
.180 .012
L
.035
.130 .010
T5
.071
.268 .014
T10
Table 29 Center Distance Tolerances
Belt Length
(in.)
15 to 20
20.01 to 30
30.01 to 40
40.01 to 50
50.01 to 60
60.01 to 70
over 70
Center Distance
Tolerances (in.)
.020
.024
.026
.030
.032
.034
To be specified
13
14
Fig. 38 Double-Sided Belt Application
15
16
T-48


Drive selection procedures for drives using Double-Sided Belts are much the same as for drives using
conventional belting. Refer to the appropriate product and engineering sections in this catalog for drive torque
ratings, engineering information, pulley details, belt tension recommendations, etc.

Some manufacturers, however, are producing double-sided belts which have nylon faced teeth on one
side only. For those belts, the limitations given in Section 5.1, page T-10 apply.
SECTION 19 LONG LENGTH TIMING BELT STOCK SPECIFICATIONS
3 mm HTD
.354
.472
.984*
.236
.354
.472
.591
.984*
.236
.354
.472
.236
.354
.472
.354
.472
.591
9
12
25*
6
9
12
15
25*
6
9
12
6
9
12
9
12
15
22.7
30.2
63.0
24.1
36.1
48.1
60.3
100.4
5.9
8.9
11.8
26.9
40.4
53.8
56.6
75.5
94.6
T
1

Brief mention of this type of belt was given in Section 5.2, page T-10. As previously indicated, long length
belt stock is produced in spiral form. Spiral cut belting is produced from a belt sleeve by moving the slitter
laterally while the belt sleeve is rotating.

The resulting belting does not have continuous tensile cords, and the teeth are not perfectly
perpendicular to the longitudinal axis of the belt. As a result, wider belts may cause performance problems
(shown with * in Table 30). As long as the belt width is narrow, these properties have been found to contribute
little if any detrimental effects to belt performance. The maximum belt width available using this process is 1"
(25 mm). Tensile modulus and strength are equivalent to conventional endless and long length belting.

This innovative product is availablein all types
Table 30 Neoprene Long-Length Belting Specifications
of belting in all pitches.
Stock
Rated Working
Maximum
Reciprocating carriage
Belt
Width
Tension, Ta
Available Length
Type
drives requiring the use of
in.
mm
N
lbf
ft.
m
higher performance curvi3
.125
2.3
9
1000
305
linear tooth belt products,
4.5
.1875
3.4
14
660
201
MXL (.080")
in long length form, can
6
.250
4.5
19
485
148
now be easily handled.
10
.375
6.8
30
330
101

This type of belt is
.250
6
7.0
30
460
140
called belt stock, and its
9.5
.375
10.5
47
320
98
XL (.200")
availability from stock is
13
.500
14.0
64
225
69
.500
13
24.5
112
275
83
indicated on the Timing
19*
.750*
36.8
163
185
56
L (.375")
Belt Locator Chart, on page
1.000*
25*
49.0
215
135
41
2-2, at the beginning of the
6
.236
15.1
67
475
145
belt product section.
101
135
281
107
161
214
268
447
26
39
52
120
180
240
252
336
420
300
250
120
600
315
240
200
115
600
390
300
600
385
300
360
275
230
91
76
37
183
96
73
61
35
183
119
91
183
117
91
110
83
70
Drive Selection With

Neoprene LongLength Belting

Drive selection pro5 mm HTD
cedures for drives using Long-Length Belting
are much the same as
for drives using conven2 mm GT2
tional endless belting.
Refer to the appropriate
product and engineering
3 mm GT2
sections in this catalog
for drive torque ratings,
5 mm GT2
engineering information, pulley details, belt
tension recommendations
etc. Table 30 includes rated belt working tension data, for those applications for which it could be helpful, as
well as maximum length available in each pitch. For drive design selection assistance with belt stock, contact
our Application Engineering Department.
2
3
4
5
6
7
8
9
10
11
12
13
14
15
T-49
16

R
T
1
2
3
4
5
6
7
8
SECTION 20 DESIGN AIDS ON INTERNET (www.sdp-si.com)

With the availability and convenience of the Internet in the work place, it was only natural to switch
from a CD-ROM publication to the Internet. All the contents of our previous CD-ROM have been converted and
placed on our Web site. The following is a partial listing of programs that have been added to our Web site for
your convenience:

1. Product Navigator (Database content manager of all products)
2. Electronic pages of our catalog
3. Order Online at www.sdp-si.com/estore
4. Center Distance Designer

Product information for all parts can be retrieved from the content database of our product line at
www.sdp-si.com/estore. Simply select the product group from the tree on the left, choose the specific product
of interest, and select the different product attributes until a product is obtained. Alternatively, you can get to
the content database by clicking the "BUY ONLINE" tab of our Web site: www.sdp-si.com.

The content database allows our customers to navigate our over 130,000 line items until the item of
interest is found. It gives the freedom to select the attributes that are of greatest interest to the user. It allows
the users to view the catalog page for additional information via Adobe Acrobat Reader. Various flavors of
CAD exchanges, of the products, can be retrieved from our Web site (proe, .dwg., iges, dxf, step., etc). We are
continually improving and updating our database to bring new information and products to our customers in a
timely manner.

The electronic pages of our catalogs can be found at www.sdp-si.com/catalogs.htm.

To find a product, first determine the catalog, then:

Click on the "DOWNLOAD PDF" button.

Select the chapter or product grouping at the bottom of the catalog icon.

Click the product subgroup and navigate, if needed, to the product page of the Adobe

document.
10
To order online, the user must do one of the following:

Click the link found in the navigation bar on our Home page www.sdp-si.com which reads
"ORDER ONLINE."
Go to this Web address: www.sdp-si.com/estore.
11
12
13
14
15
16
T-50


Center Distance Designer: Provides computerized Drive Ratio and Center Distance calculations. The
Center Distance Designer program, on the web, computes belt lengths for various center distances and checks
the number of teeth in mesh for both pulleys. It calculates pulley drive ratios and the minimal center distance
for a designated pulley pair.

The Center Distance Designer searches and retrieves all pulleys and belts shown in the handbook that
fits within the customer criteria. Once the design is completed, the part numbers can be instantly retrieved
from the database. Each part number is then linked to an electronic catalog page, which is viewable and can
be printed.

The user can design a drive in a most efficient manner, since the program described above presents
available alternatives, as well as a direct reference to catalog page numbers and part numbers involved.
To access the Center Distance Designer, go to www.sdp-si.com/cd/default.htm.
R
T
1
2
SECTION 21 DRIVE RATIO TABLES

In the design of belt drives, we usually know the speed ratio (transmission ratio) and we need to
determine pulley sizes, center distance and belt length. These quantities are shown in Figure 39, for an open
(uncrossed) belt.

The Drive Ratio Tables (Table 31, starting on page T-53) are designed to facilitate the determination of
these quantities. They list the following information:

N1/N2
= the transmission ratio obtained when the larger pulley (N1 teeth) is the input and smaller
pulley (N2 teeth) is the output. Given to 3 decimal places.

N2/N1 = the transmission ratio obtained when the larger pulley (N1 teeth) is the output and the
smaller pulley (N2 teeth) is the input. Given to 3 decimal places.
(Note that N1/N2 is the reciprocal of N2/N1)

N1
= number of teeth on larger pulley.

N2
= number of teeth on smaller pulley.

N1 N2 = difference between number of teeth on larger and smaller pulleys. This number is useful
in center-distance determination.

C MIN = The minimum center distance between pulleys for a belt of unit pitch. If the pitch is denoted
by p, the actual minimum center distance is a product of C MIN and p. The minimum center
distance is determined from the condition that at the minimum center distance, the pitch
circles of the pulleys can be assumed to touch. This will generally give a satisfactory
approximation to the practical minimum center distance. The table is based on the
equation:

N1 + N2

C MIN = x Belt Pitch
(21-1)

2

At the beginning of the table, a list of standard pulley sizes is shown. The smallest pulley has 10 teeth and
the largest, 156 teeth. A standard size will be the most economical. If a nonstandard size is needed, however,
please contact Stock Drive Products for assistance.

3
4
5
6
7
8
9
10
11
12
13
14
15
T-51
16

Larger Pulley, N1 Teeth
Belt, NB Teeth
T
T
1
Smaller Pulley,
N2 Teeth
2
3
4
5
C
Center Distance
Fig. 39 Belt Nomenclature

The use of the tables is best illustrated by means of examples.

Example 1: For a transmission ratio of 1.067, find the number of teeth of the pulleys and the minimum
center distance for a belt of 5 mm pitch.

When the transmission ratio is greater than unity, the larger pulley is the input and the smaller pulley is
the output. That is to say, the transmission ratio is equal to N1/N2. The table is organized in order of increasing
values of N1/N2 and decreasing values of N2/N1. Referring to the table at this value of N1/N2, we find the
following entries:
6
7
8
9
10
11
12
N2/N1
1.067
0.938
N1 N2
1
2
N2
15
30
N1
16
32
C MIN
4.934
9.868
Hence, there are 2 different pulley combinations for the given transmission ratio of 1.067. For each of these,
the minimum center distance is 5 x (C MIN) in mm. If the smaller pulley were driving, the transmission ratio
would have been 0.938. The quantity (N1 N2) is needed in center-distance calculations, as described in the
next section.

Example 2: Given a transmission ratio of 0.680, determine the pulley sizes.

Since the transmission ratio is less than one, the smaller pulley is the input and the transmission ratio
is given by N2/N1 = 0.680. Looking up this ratio in the table, we find N1 = 25, N2 = 17, N1 N2 = 8. In this
case, only one pulley combination is available.

Example 3: Given a driving pulley of 48 teeth and a driven pulley of 19 teeth, find the minimum center
distance for a belt pitch of 3 mm.

The transmission ratio is N1/N2 = 48/19 = 2.526. Looking up this ratio in the table, we find C MIN =
10.663. The minimum center distance, therefore, is given by 3 x 10.663 or 31.989 mm.

Example 4: Given a transmission ratio of 2.258, find the pulley sizes.

Looking through the table, there is no entry at this value of the transmission ratio.
The nearest entries are:
13
14
15
16
N1/N2
T-52
N1/N2
N2/N1
2.250
0.444
2.273
0.440
N1
36
72
25
N2
16
32
11
N1 N2
20
40
14


Since the difference between the desired ratio and the nearest available ratios is only about 0.008, it is
likely that the 2.250 or 2.273 ratios will be acceptable. If this is not the case, however, the design may require
review, or a nonstandard pulley combination may be considered.
R
T
DRIVE RATIO TABLES
Table 31
Definition:

Drive Ratio (Transmission Ratio) is the ratio of number of teeth of the input and output pulleys.
If the input pulley is larger than the output, the Drive Ratio will be larger than one and we
have a step-up drive. If the input pulley is smaller than the output pulley, the Drive Ratio will
be smaller than one and we have a step-down drive.
Nomenclature Used:

N1
N2
N1/N2
N2/N1
N1 N2
C MIN
Number of teeth of large pulley

Number of teeth of small pulley
Step-up Drive Ratio
Step-down Drive Ratio
Pulley tooth differential needed for Table 42 Center Distance Factor Table
Minimum center distance for particular pulley combination expressed in belt
pitches
5
6
7
10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 22, 24, 25,
28, 30, 32, 36, 40, 48, 60, 72, 84, 96, 120, 156
Note:

3
4
=
=
=
=
=
=
Pulley Sizes Included:

These pulley sizes reflect the preferred sizes per ISO Standard 5294 for synchronous belt
drives Pulleys (First edition 1979-07-15). Many other sizes are offered in this catalog. The
availability of stock sizes varies depending on the particular choice of pitch, material and
configuration. Nonstandard sizes are available as custom made specials. Please submit your
requirement for us to quote.
9
10
Continued on the next page
11
12
13
14
15
T-53
16

Table 31 (Cont.) Drive Ratio Tables

N1/N2
N2/N1
T
1
2
3
1.000
1.000
4
5
6
7
8
9
10
11
1.042
1.053
1.056
1.059
1.063
0.960
0.950
0.947
0.944
0.941
1.067
0.938
1.071
0.933
1.077
1.083
0.929
0.923
1.091
0.917
1.100
0.909
1.111
0.900
1.118
0.895
N1
N2
10
11
12
13
14
15
16
17
18
19
20
22
24
25
28
30
32
36
40
48
60
72
84
96
120
156
25
20
19
18
17
16
32
15
30
14
13
12
24
11
22
20
40
19
10
11
12
13
14
15
16
17
18
19
20
22
24
25
28
30
32
36
40
48
60
72
84
96
120
156
24
19
18
17
16
15
30
14
28
13
12
11
22
10
20
18
36
17
Continued from the previous page
12
13
14
15
16
T-54
N1-N2 C MIN
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
1
2
1
2
1
1
1
2
1
2
2
4
2
3.183
3.501
3.820
4.138
4.456
4.775
5.093
5.411
5.730
6.048
6.366
7.003
7.639
7.958
8.913
9.549
10.186
11.459
12.732
15.279
19.099
22.918
26.738
30.558
38.197
49.656
7.799
6.207
5.889
5.570
5.252
4.934
9.868
4.615
9.231
4.297
3.979
3.661
7.321
3.342
6.685
6.048
12.096
5.730
N1/N2
N2/N1
N1
N2
1.120
0.893
1.125
0.889
1.133
1.136
0.882
0.880
1.143
0.875
1.154
1.158
0.867
0.864
1.167
0.857
1.176
1.182
1.188
0.850
0.846
0.842
1.200
0.833
1.214
1.222
1.231
0.824
0.818
0.813
1.250
0.800
1.263
1.267
0.792
0.789
1.273
0.786
1.280
0.781
1.286
0.778
1.294
0.773
1.300
0.769
1.308
0.765
28
18
36
17
25
16
32
96
15
22
14
28
84
20
13
19
12
18
24
30
36
48
72
17
22
16
15
20
25
30
40
60
120
24
19
14
28
32
18
36
22
13
156
17
25
16
32
15
22
14
28
84
13
19
12
24
72
17
11
16
10
15
20
25
30
40
60
14
18
13
12
16
20
24
32
48
96
19
15
11
22
25
14
28
17
10
120
13
N1-N2 C MIN
3
2
4
2
3
2
4
12
2
3
2
4
12
3
2
3
2
3
4
5
6
8
12
3
4
3
3
4
5
6
8
12
24
5
4
3
6
7
4
8
5
3
36
4
8.435
5.411
10.823
5.093
7.480
4.775
9.549
28.648
4.456
6.525
4.138
8.276
24.828
5.889
3.820
5.570
3.501
5.252
7.003
8.754
10.504
14.006
21.008
4.934
6.366
4.615
4.297
5.730
7.162
8.594
11.459
17.189
34.377
6.844
5.411
3.979
7.958
9.072
5.093
10.186
6.207
3.661
43.927
4.775

Table 3 1 (Cont.) Drive Ratio Tables

N1/N2
N2/N1
N1
N2
1.316
0.760
1.333
0.750
25
16
20
24
32
40
48
96
19
15
30
22
18
25
14
28
84
24
17
20
40
120
36
16
32
19
22
25
28
15
18
24
30
36
48
60
72
20
17
28
25
22
30
19
19
12
15
18
24
30
36
72
14
11
22
16
13
18
10
20
60
17
12
14
28
84
25
11
22
13
15
17
19
10
12
16
20
24
32
40
48
13
11
18
16
14
19
12
1.357
0.737
1.364
0.733
1.375
1.385
1.389
0.727
0.722
0.720
1.400
0.714
1.412
1.417
0.708
0.706
1.429
0.700
1.440
0.694
1.455
0.688
1.462
1.467
1.471
1.474
0.684
0.682
0.680
0.679
1.500
0.667
1.538
1.545
1.556
1.563
1.571
1.579
1.583
0.650
0.647
0.643
0.640
0.636
0.633
0.632
N1-N2 C MIN
6
4
5
6
8
10
12
24
5
4
8
6
5
7
4
8
24
7
5
6
12
36
11
5
10
6
7
8
9
5
6
8
10
12
16
20
24
7
6
10
9
8
11
7
7.003
4.456
5.570
6.685
8.913
11.141
13.369
26.738
5.252
4.138
8.276
6.048
4.934
6.844
3.820
7.639
22.918
6.525
4.615
5.411
10.823
32.468
9.708
4.297
8.594
5.093
5.889
6.685
7.480
3.979
4.775
6.366
7.958
9.549
12.732
15.915
19.099
5.252
4.456
7.321
6.525
5.730
7.799
4.934
N1/N2
N2/N1
1.600
0.625
1.625
0.615
1.636
0.611
1.647
0.607
1.667
0.600
1.684
1.692
1.700
0.594
0.591
0.588
1.714
0.583
1.727
0.579
1.750
0.571
1.765
1.778
1.786
0.567
0.563
0.560
1.800
0.556
1.818
0.550
1.833
1.846
1.857
1.867
0.545
0.542
0.538
0.536
1.875
0.533
1.882
1.895
1.900
1.920
1.923
2.000
0.531
0.528
0.526
0.521
0.520
0.500
N1
N2
16
24
32
40
48
96
156
18
36
28
20
25
30
40
60
120
32
22
17
24
48
19
28
84
30
32
25
18
36
72
20
40
22
24
156
28
30
60
32
36
19
48
25
20
10
15
20
25
30
60
96
11
22
17
12
15
18
24
36
72
19
13
10
14
28
11
16
48
17
18
14
10
20
40
11
22
12
13
84
15
16
32
17
19
10
25
13
10
N1-N2 C MIN
6
9
12
15
18
36
60
7
14
11
8
10
12
16
24
48
13
9
7
10
20
8
12
36
13
14
11
8
16
32
9
18
10
11
72
13
14
28
15
17
9
23
12
10
4.138
6.207
8.276
10.345
12.414
24.828
40.107
4.615
9.231
7.162
5.093
6.366
7.639
10.186
15.279
30.558
8.117
5.570
4.297
6.048
12.096
4.775
7.003
21.008
7.480
7.958
6.207
4.456
8.913
17.825
4.934
9.868
5.411
5.889
38.197
6.844
7.321
14.642
7.799
8.754
4.615
11.618
6.048
4.775
T
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
T-55
16


N1/N2
N2/N1
T
1
2.000
0.500
2
3
4
5
6
7
8
9
10
2.083
2.100
2.105
2.118
2.133
2.143
2.143
2.154
2.167
0.480
0.476
0.475
0.472
0.469
0.467
0.467
0.464
0.462
2.182
0.458
2.200
2.222
0.455
0.450
2.250
0.444
2.273
2.286
2.308
0.440
0.438
0.433
2.333
0.429
2.353
0.425
2.400
2.462
2.500
0.417
0.406
0.400
11
N1
N2
22
24
28
30
32
36
40
48
60
72
96
120
25
84
40
36
32
30
60
28
156
24
48
22
40
36
72
25
32
30
28
84
40
24
36
48
60
72
96
32
25
30
40
60
11
12
14
15
16
18
20
24
30
36
48
60
12
40
19
17
15
14
28
13
72
11
22
10
18
16
32
11
14
13
12
36
17
10
15
20
25
30
40
13
10
12
16
24
12
13
14
15
16
T-56
N1-N2 C MIN
11
12
14
15
16
18
20
24
30
36
48
60
13
44
21
19
17
16
32
15
84
13
26
12
22
20
40
14
18
17
16
48
23
14
21
28
35
42
56
19
15
18
24
36
5.252
5.730
6.685
7.162
7.639
8.594
9.549
11.459
14.324
17.189
22.918
28.648
5.889
19.735
9.390
8.435
7.480
7.003
14.006
6.525
36.287
5.570
11.141
5.093
9.231
8.276
16.552
5.730
7.321
6.844
6.366
19.099
9.072
5.411
8.117
10.823
13.528
16.234
21.645
7.162
5.570
6.685
8.913
13.369
N1/N2
N2/N1
N1
N2
2.500
2.526
2.545
0.400
0.396
0.393
2.571
0.389
2.600
2.625
0.385
0.381
2.667
0.375
2.727
0.367
2.769
0.361
2.800
0.357
2.824
2.857
2.880
2.909
0.354
0.350
0.347
0.344
3.000
0.333
3.077
3.158
0.325
0.317
3.200
0.313
3.250
0.308
3.273
0.306
3.333
0.300
3.360
0.298
3.429
0.292
3.500
3.529
0.286
0.283
120
48
28
36
72
156
84
32
40
48
96
30
60
36
28
84
48
40
72
32
30
36
48
60
72
84
96
120
40
60
32
48
96
156
36
72
40
60
120
84
48
96
84
60
48
19
11
14
28
60
32
12
15
18
36
11
22
13
10
30
17
14
25
11
10
12
16
20
24
28
32
40
13
19
10
15
30
48
11
22
12
18
36
25
14
28
24
17
N1-N2 C MIN
72
29
17
22
44
96
52
20
25
30
60
19
38
23
18
54
31
26
47
21
20
24
32
40
48
56
64
80
27
41
22
33
66
108
25
50
28
42
84
59
34
68
60
43
26.738
10.663
6.207
7.958
15.915
34.377
18.462
7.003
8.754
10.504
21.008
6.525
13.051
7.799
6.048
18.144
10.345
8.594
15.438
6.844
6.366
7.639
10.186
12.732
15.279
17.825
20.372
25.465
8.435
12.573
6.685
10.027
20.054
32.468
7.480
14.961
8.276
12.414
24.828
17.348
9.868
19.735
17.189
12.255


N1/N2
N2/N1
3.600
0.278
3.636
3.692
0.275
0.271
3.750
0.267
3.789
3.818
3.840
3.900
0.264
0.262
0.260
0.256
4.000
0.250
4.200
4.235
0.238
0.236
4.286
0.233
4.333
0.231
4.364
0.229
4.421
4.500
4.615
4.667
0.226
0.222
0.217
0.214
4.800
0.208
4.875
4.941
0.205
0.202
5.000
0.200
5.053
5.143
5.200
5.250
5.333
0.198
0.194
0.192
0.190
0.188
5.455
0.183
5.538
5.571
0.181
0.179
N1
N2
36
72
40
48
60
120
72
84
96
156
40
48
60
72
96
120
84
72
60
120
156
48
96
84
72
60
84
48
72
96
120
156
84
60
120
96
72
156
84
96
60
120
72
156
10
20
11
13
16
32
19
22
25
40
10
12
15
18
24
30
20
17
14
28
36
11
22
19
16
13
18
10
15
20
25
32
17
12
24
19
14
30
16
18
11
22
13
28
N1-N2 C MIN
26
52
29
35
44
88
53
62
71
116
30
36
45
54
72
90
64
55
46
92
120
37
74
65
56
47
66
38
57
76
95
124
67
48
96
77
58
126
68
78
49
98
59
128
7.321
14.642
8.117
9.708
12.096
24.192
14.483
16.870
19.258
31.194
7.958
9.549
11.937
14.324
19.099
23.873
16.552
14.165
11.777
23.555
30.558
9.390
18.780
16.393
14.006
11.618
16.234
9.231
13.846
18.462
23.077
29.921
16.075
11.459
22.918
18.303
13.687
29.603
15.915
18.144
11.300
22.600
13.528
29.285
N1/N2
N2/N1
N1
N2
5.600
5.647
0.179
0.177
6.000
0.167
6.240
6.316
6.400
6.462
6.500
6.545
6.667
6.857
7.000
7.059
7.091
7.200
7.385
7.500
7.636
7.800
0.160
0.158
0.156
0.155
0.154
0.153
0.150
0.146
0.143
0.142
0.141
0.139
0.135
0.133
0.131
0.128
8.000
0.125
8.211
8.400
8.571
8.667
8.727
9.176
9.231
9.600
9.750
10.000
10.400
10.909
11.143
0.122
0.119
0.117
0.115
0.115
0.109
0.108
0.104
0.103
0.100
0.096
0.092
0.090
12.000
0.083
13.000
14.182
15.600
0.077
0.071
0.064
84
96
60
72
84
96
120
156
120
96
84
156
72
120
96
84
120
156
72
96
120
84
156
96
120
156
84
120
156
96
156
120
96
156
120
156
120
156
120
156
156
156
156
15
17
10
12
14
16
20
25
19
15
13
24
11
18
14
12
17
22
10
13
16
11
20
12
15
19
10
14
18
11
17
13
10
16
12
15
11
14
10
13
12
11
10
N1-N2 C MIN
69
79
50
60
70
80
100
131
101
81
71
132
61
102
82
72
103
134
62
83
104
73
136
84
105
137
74
106
138
85
139
107
86
140
108
141
109
142
110
143
144
145
146
15.756
17.985
11.141
13.369
15.597
17.825
22.282
28.807
22.123
17.666
15.438
28.648
13.210
21.963
17.507
15.279
21.804
28.330
13.051
17.348
21.645
15.120
28.011
17.189
21.486
27.852
14.961
21.327
27.693
17.030
27.534
21.168
16.870
27.375
21.008
27.215
20.849
27.056
20.690
26.897
26.738
26.579
26.420
T
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
T-57
16

SECTION 22 CENTER DISTANCE FORMULAS FOR PULLEYS AND SPROCKETS

22.1 Nomenclature And Basic Equations
T
1
2
3
4
Figure 40 illustrates the notation involved.

The following nomenclature is used:
C = Center Distance (in)

L
= Belt Length or Chain (in) = p NB
p
= Pitch of Belt or Chain (in)
NB = Number of Teeth on belt or rollers on chain = L/p
N1 = Number of Teeth (grooves) on larger pulley or sprocket
N2 = Number of Teeth (grooves) on smaller pulley or sprocket

= One half angle of wrap on smaller pulley (radians) or sprocket
=
/2 = angle between straight portion of belt or chain and line of centers (radians)
R1 = Pitch Radius of larger pulley or sprocket (in) = (N1) p/2
R2 = Pitch Radius of smaller pulley or sprocket (in) = (N2) p/2
= 3.14159 (ratio of circumference to diameter of circle)
Belt, NB Teeth; Circumferential Pitch p
R1
6
R2
Smaller Pulley or
Sprocket, N2 Teeth
8
9
10
11
12
Figure 40 Belt Geometry

The basic equation for the determination of center distance is:
2C sin = L (R1 + R2) ( 2) (R1 R2)
where C cos = R1 R2
(22-1)
(22-2)

These equations can be combined in different ways to yield various equations for the determination of
center distance. We have found the formulations, which follow, useful.
22.2 Exact Center Distance Determination Unequal Pulleys or Sprockets

The exact equation is as follows:
C = (1/2)p [(NB N1) + k(N1 N2)]
13

1
) + ]
where k = () [tan(
4
2

14
and is determined from:

1
(NB N1)

() (tan ) = = Q

(N1 N2)
15
16
Larger Pulley or
Sprocket, N2 Teeth
T-58
(22-3)
(22-4)
(22-5)


The value, C/p, is called the center distance factor and is tabulated for various combinations of (NB N1)
and (N1 N2) in Table 42 in the next section.

The value of k varies within the range (1/, 1/2) depending on the number of teeth on the belt or rollers
on the chain. All angles in Equations (22-4) through (22-5) are in radians.

The procedure for center distance determination is as follows:
1. Select values of N1, N2 (in accordance with desired transmission ratio) and NB.
2. Compute Q = (NB N1)/(N1 N2).
3. Compute by solving Equation (22-5) numerically.
4. Compute k from Equation (22-4).
5. Compute C from Equation (22-3).
2
3
22.3 Exact Center Distance Determination Equal Pulleys or Sprockets

For equal pulleys, N1 = N2 and Equation (22-3) becomes:

p (NB N1)

C =

2
(22-6)
22.4 Approximate Center Distance Determination

Approximate formulas are used when it is desirable to minimize computation time and when an
approximate determination of center distance suffices.

An alternative to Equation (22-1) for the exact center distance can be shown to be the following:
_________________________________

p
(N1 + N2)
(N1 + N2) 2 2 (N1 N2) 2

C = {NB + [NB ]
(1 + S) } (22-7)

4
2
2
2
where S varies between 0 and 0.1416, depending on the angle of wrap of the smaller pulley. The value of S is
given very nearly by the expression:

(cos 2)

S =
(22-8)

12

In the approximate formulas for center distance, it is customary to neglect S and thus to obtain following
approximation for C:
____________________________

p
(N1 + N2)
(N1 + N2) 2 2 (N1 N2) 2

C = {NB + [NB ]
(22-9)
}

4
2
2
2
6
7
8
9
10

The error in Equation (22-9) depends on the speed ratio and the center distance. The accuracy is greatest
for speed ratios close to unity and for large center distances. The accuracy is least at minimum center distance
and high transmission ratios. In many cases, the accuracy of the approximate formula is acceptable.
11

Alternatively, center distance can be obtained to sufficient accuracy using the center distance factor
table (See Section 23).
12
22.5 Number Of Teeth In Mesh (TIM)
13

It is generally recommended that the number of teeth in mesh be not less than 6.
The number, TIM, teeth in mesh is given by:
14
15
T-59
16

R
T

TIM = N2
(22-10)

where =
when [see Equation (22-5) is given in radians (see also the derivation given for TIM in this

Handbook)].
22.6 Determination Of Belt or Chain Size For Given Pulleys And Center Distance
1
2
3
4
5

Occasionally, the center distance of a given installation is prescribed and the belt length is to be
determined. For given pitch, number of teeth on pulleys and center distance, the number of teeth of the belt
can be found from the equation:

_______________

(N1 + N2)
(N1 N2)
(N1 N2)p
2C 2
N1 N2 2
1

NB = + sin [] + () ()
(22-11)

2
2C
p
where the arcsin is given in radians and lies between 0 and /2. Since NB, in general, will not be a whole
number, the nearest whole number less than NB can be used, assuming a slight increase in belt tension is
not objectionable.

An approximate formula can be used to obtain the belt length:

(D1 D2)2

L = 2C + + 1.57 x (D1 + D2)

4C
SECTION 23 CENTER DISTANCE FACTOR TABLES (TABLE 32)
To view and download Table 32 (Table 42 D265 Catalog) - Center Distance Factor Tables, go to:
www.sdp-si.com/D265/D265cat.htm
To use our Center Distance Calculator, go to:

www.sdp-si.com/cd/default.htm
8
9
10
11
12
13
14
15
16
T-60
(22-12)

SECTION 24 TIMING BELT DRIVE SELECTION PROCEDURE

Step 1 Determination of design load

Drives consist of a driver and a driven pulley. In general, both pulleys are not of the same size; therefore,
a speed reduction or increase occurs. Both convey the same power; however, the torque on each pulley is
different. Drive designs should be based on the smaller pulley which will be subject to higher speed.

The peak design load must be taken into account, and it is obtained by multiplying the torque by a
service factor. Service factors between 1.5 and 2.0 are generally recommended when designing small pitch
synchronous drives. Knowledge of drive loading characteristics should influence the actual value selected.
A higher service factor should be selected for applications with high peak loads, high operating speeds,
unusually severe operating conditions, etc. Lower service factors can be used when the loading is smooth,
well defined, etc. and the reliability is less critical. Some designs may require service factors outside the 1.5
to 2.0 range, depending upon the nature of the application.

If a stall torque of the driver is not given but the nameplate horsepower or kW power consumption is
known, the torque can be obtained from:

63025 x Shaft hp

T (lbf in.) =

Shaft (rpm)
(24-1)
T (lbf in.) = 8.85 x T (Nm) or
(24-2)
T (ozf in.) = 16 x T (lbf in.)
(24-3)
Tpeak = T x Service Factor
(24-4)
1 kW = 1.341 hp
(24-5)
Step 2 Choice of belt pitch

As shown in Figure 4, (page T-6) different belt pitches can satisfy the same horsepower requirements,
also taking into account the speed of the faster shaft. The choice is somewhat individual and may take into
account, among others, the following factors:

compatibility with previous designs

superiority of GT drives as far as noise, backlash, positioning accuracy, etc. is concerned

local availability for replacement

size limitations; i.e. the size of pulleys and of the entire drive will be optimized if GT2 or HTD
pitches are used

1
2
3
4
5
6
7
8
9
Step 3 Check belt pitch selection based on individual graphs

Graphs shown on Figures 41 through 43 show the peak torque, Tpeak computed previously, plotted against
the speed of faster shaft. Since the belt pitch was chosen in Step 2, reference to these graphs will confirm the
validity of the selection.

As an example, assume that the following data was obtained: Tpeak = 5 lbf in. and 1000 rpm. The potential
choices are: 2 mm GT2, 3 mm HTD, or XL. The 2 mm drive will be substantially smaller than the other choices.

10
11
Step 4 Determine speed ratio

Use our Web site, www.sdp-si.com, or Drive Ratio Tables shown in SECTION 21, starting at page T-51,
and establish the number of teeth of the small and large pulley based on the chosen speed ratio. Attempt to
use available stock sizes for best economy. Use of our Web site will immediately guide you to the appropriate
catalog page and part number. Make note of the Pitch Diameter (PD) of the small pulley.
12
13
14
15
Rev: 8.22.12 JC
T-61
16

14,000
12,000
10,000
9,000
8,000
7,000
6,000
T
1
5,000
4,000
3,000
5
6
7
Speed of Faster Shaft (rpm)
2,000
2 mm GT2
3 mm GT2
5 mm GT2
1,000
900
800
700
600
500
400
300
200
9
10
100
1
0.11
11
2
3
4 5
7
10
0.23 0.34 0.4 50.57 0.79 1.1
20
2.3
30 40 50 70
3.4 4.5 5.7 7.9
100
11
Design Torque (Tpeak)

Fig. 41 GT2 Belt Selection Guide
12
13
14
15
16
T-62
200
23
300 400 500 (lbf in.)

34 45 57 (N m)

30,000
20,000
10,000
8,000
6,000
5,000
4,000
3,450 rpm
3,000
2,000
3
4
1,750 rpm
1,160 rpm
1,000
870 rpm
800
600
500
400
300
3 mm HTD
5 mm HTD
200
100
9
0
50
5.7
100
11
150
17
200
23
250
28
300
34
350 (lbf in.)

40 (Nm)
10
11
Fig. 42 HTD Belt Selection Guide
12
13
14
15
T-63
16

30,000
20,000
T
1
10,000
8,000
6,000
5,000
4,000
4
5
6
3,450 rpm
3,000
2,000
1,750 rpm
MXL + 40 D.P.
(.080" & .0816")
XL (.200")
1,160 rpm
1,000
870 rpm
800
600
500
400
8
9
10
300
200
100
0
11
4
64
0.45
6
96
0.68
8
128
0.9
10
160
1.13

Fig. 43 Trapezoidal Belt Selection Guide
12
13
14
15
16
2
32
0.23
T-64
12
192
1.35
14 (lbf in.)
224 (ozf in.)
1.58 (Nm)

Step 5 Check belt speed

Belt speeds up to 6,500 fpm (33.02 m/s) do not require special pulleys. Speeds higher than these require
special pulley materials and dynamic balancing.

Speed is computed using the following equations:

V(fpm) = 0.262 x pulley PD (in.) x pulley rpm
(24-5)
V(m/s) = 0.0000524 x pulley PD (mm) x pulley rpm
(24-6)
where: m/s = 0.00508 x fpm

(24-7)
1
2
Step 6 Determine belt length

The design layout may govern the determination of the belt length. Since the pulley sizes are known,
use of Center Distance Factor Tables shown in SECTION 23 (starting on page T-60) will yield NB the number
of teeth of the belt. If a fractional number is obtained, the closest integer number should be chosen, and the
calculation must be repeated to obtain the new center distance for the design.

It is worthwhile to check if a belt with the chosen number of teeth is available in this Handbook. If it is
not available, the closest fitting belt size must be chosen, and the calculation must be repeated to establish
the center distance to which the layout must be corrected to accommodate the available choice of belt.

3
4
5
Step 7 Determine the belt width

The number of grooves of the small pulley as well as the rpm of the faster shaft on which this pulley is
located are known. Tables 33 through 42 show the torque and/or horsepower or kilowatt ratings for the base
width of particular belt pitches.

For the HTD and GT2 drives, the torque ratings shown in these tables must be multiplied by the length
correction factor. This factor is a number smaller than 1 for shorter length and higher for longer belts. This
reflects the fact that a longer belt will be less prone to wear and tear as opposed to a shorter belt.

When the given torque from the table is multiplied by the length correction factor, this figure may be
smaller or larger than the previously computed peak torque Tpeak. If it is smaller, a belt narrower than the base
width can be used. Alternatively, if Tpeak is larger, a wider belt must be specified. In order to finalize the belt
width, the width multiplier given on the particular table itself must be used. Also, consult the appropriate belt
product page for availability of standard widths. We are able to supply nonstandard width belts as well as
nonstandard width pulleys, if desired.

In any event, the torque ratings given in the table multiplied by the length factor and by the width
multiplier must yield a torque greater than the Tpeak computed previously.

The torque or horsepower ratings are based on 6 or more teeth in mesh for the smaller pulley.
6
7
8
9
10
11
12
13
14
15
T-65
16

Step 8 Check the number of teeth in mesh

The arc of contact on the smaller pulley in degrees can be found as follows:

60 (PD pd )

Arc of Contact = 180

C
where: PD = Large pitch diameter, inches

pd = Small pitch diameter, inches

C = Drive center distance, inches
The number of teeth in mesh on the smaller pulley can be found as follows:
3
4
5
6
7
(degrees)

(Arc) (n)

Teeth in Mesh =

360
(24-9)
where: Arc = Arc of contact; small pulley, degrees

n
= number of grooves, small pulley

Drop any fractional part and use only the whole number as any tooth not fully engaged cannot be
considered a working tooth.

If the teeth in mesh is less than 6, correct the belt torque rating with the following multiplication factors:
5 teeth in mesh.................... multiply by 0.8



2 teeth in mesh.................... suggest redesign

1 tooth in mesh.................... suggest redesign

Step 9 Determine proper belt installation tension

Procedure to calculate proper belt installation tension for specific applications are included in
SECTION 10, on page T-29.

For the specified parts, both pulleys and belt, obtain part numbers from the Handbook or our Web
site (www.sdp-si.com). In case special sizes or alterations are needed, contact the SDP/SI Application
Engineering Department.
Step 10 Check availability of all components
10
11
12
13
14
15
16
(24-8)
T-66
124
62
144
72
0.80
146
73
168
84
0.85
20
12.73
0.501
1.63
1.60
1.57
1.55
1.53
1.50
1.49
1.47
1.46
1.46
1.44
1.43
1.43
1.42
1.41
1.41
1.41
1.40
1.39
1.39
1.38
1.38
1.37
1.36
1.35
1.34
1.33
1.32
170
85
196
98
0.90
24
15.28
0.602
1.99
1.96
1.92
1.90
1.88
1.84
1.82
1.81
1.79
1.78
1.77
1.76
1.75
1.74
1.73
1.73
1.72
1.71
1.71
1.70
1.69
1.69
1.68
1.67
1.65
1.64
1.63
1.62
198
99
230
115
0.95
28
17.83
0.702
2.35
2.31
2.27
2.25
2.22
2.17
2.15
2.13
2.12
2.11
2.09
2.08
2.07
2.06
2.05
2.04
2.04
2.03
2.02
2.01
2.00
2.00
1.98
1.97
1.95
1.94
1.93
1.92
232
116
270
135
1.00
272
136
316
158
1.05
32
20.37
0.802
2.71
2.66
2.62
2.59
2.55
2.51
2.48
2.46
2.44
2.43
2.41
2.40
2.38
2.37
2.36
2.36
2.35
2.34
2.33
2.32
2.31
2.30
2.29
2.27
2.25
2.24
2.22
2.21
318
159
370
185
1.10
36
22.92
0.902
3.07
3.01
2.96
2.93
2.89
2.84
2.81
2.78
2.77
2.75
2.73
2.71
2.70
2.69
2.68
2.67
2.66
2.65
2.63
2.62
2.62
2.61
2.59
2.58
2.55
2.53
2.52
2.51
372
186
434
217
1.15
40
25.46
1.003
3.43
3.37
3.31
3.27
3.23
3.17
3.14
3.11
3.09
3.08
3.05
3.03
3.02
3.00
2.99
2.98
2.97
2.96
2.95
2.93
2.92
2.91
2.90
2.88
2.85
2.83
2.82
2.80
56
35.65
1.404
4.84
4.76
4.68
4.63
4.57
4.49
4.44
4.40
4.38
4.35
4.32
4.29
4.27
4.25
4.24
4.22
4.21
4.19
4.17
4.15
4.14
4.13
4.10
4.08
4.04
4.01
3.98
3.96
64
40.74
1.604
5.55
5.45
5.36
5.30
5.23
5.14
5.08
5.04
5.01
4.99
4.95
4.92
4.89
4.87
4.85
4.84
4.82
4.80
4.78
4.76
4.74
4.73
4.70
4.67
4.63
4.59
4.56
4.53
72
45.84
1.805
6.25
6.14
6.04
5.98
5.90
5.79
5.73
5.68
5.65
5.62
5.58
5.54
5.52
5.49
5.47
5.45
5.44
5.41
5.38
5.36
5.35
5.33
5.29
5.26
5.21
5.17
5.14
436 510 598 698

218 255 299 349
508 596 696 800
254 298 348 400
1.20 1.25 1.30 1.35
48
30.56
1.203
4.13
4.06
3.99
3.95
3.90
3.83
3.79
3.76
3.73
3.72
3.69
3.66
3.64
3.63
3.62
3.60
3.59
3.57
3.56
3.54
3.53
3.52
3.50
3.48
3.45
3.42
3.40
3.38
80
50.93
2.005
6.95
6.83
6.71
6.64
6.56
6.44
6.37
6.32
6.28
6.25
6.20
6.16
6.13
6.11
6.08
6.06
6.05
6.01
5.99
5.96
5.94
5.92
5.88
5.85
5.79
5.75
5.70
9
1.50
T-67
Length Correction Factor
106
53
122
61
0.75
18
11.46
0.451
1.45
1.42
1.40
1.38
1.36
1.34
1.32
1.31
1.30
1.29
1.28
1.27
1.27
1.26
1.26
1.25
1.25
1.24
1.23
1.23
1.22
1.22
1.21
1.20
1.19
1.18
1.18
1.17
6
1.00
To
100
50
104
52
0.70
16
10.19
0.401
1.27
1.25
1.22
1.21
1.19
1.17
1.15
1.14
1.14
1.13
1.12
1.11
1.11
1.10
1.10
1.09
1.09
1.08
1.08
1.07
1.07
1.06
1.06
1.05
1.04
1.03
1.03
1.02
4
0.67
Length (mm)
# of teeth
Length (mm)
# of teeth
14
8.91
0.351
1.09
1.07
1.05
1.03
1.02
1.00
0.99
0.98
0.97
0.97
0.96
0.95
0.94
0.94
0.94
0.93
0.93
0.92
0.92
0.92
0.91
0.91
0.90
0.90
0.89
0.88
0.88
0.87
Belt Width (mm)
Width Multiplier
From
12
7.64
0.301
0.90
0.89
0.87
0.86
0.85
0.83
0.82
0.81
0.80
0.80
0.79
0.79
0.78
0.78
0.78
0.77
0.77
0.76
0.76
0.76
0.75
0.75
0.75
0.74
0.73
0.73
0.72
0.72
Table 33 Rated Torque (lbf in.) for Small Pulleys - 6 mm Belt Width
The following table represents the torque ratings for each belt, in its
base width, at the predetermined number of grooves, pitch diameters
and rpm's. These ratings must be multiplied by the appropriate width
factor and applicable belt length factor to obtain the corrected torque
rating (see Step 7 of SECTION 24, on page T-65).
For Belt
Length
Number of Grooves
Pitch
mm
Diameter
inches
10
20
40
60
100
200
300
400
500
600
rpm
800
of
1000
Fastest
1200
Shaft
1400
1600
[Tabulated
1800
values are
2000
in lbf in.]
2400
2800
3200
3600
4000
5000
6000
8000
10000
12000
14000
2 mm Pitch PowerGrip GT2 Belts

12
2.00
R
T
1
10
11
12
13
14
15
16
12
13
14
15
16
T-68
106
53
122
61
0.75
124
62
144
72
0.80
170
85
196
98
0.90
146
73
168
84
0.85
198
99
230
115
0.95
232
116
270
135
1.00
272
136
316
158
1.05
318
159
370
185
1.10
36
22.92
0.902
0.35
0.34
0.33
0.33
0.33
0.32
0.32
0.31
0.31
0.31
0.31
0.31
0.31
0.30
0.30
0.30
0.30
0.30
0.30
0.30
0.30
0.29
0.29
0.29
0.29
0.29
0.28
0.28
48
30.56
1.203
0.47
0.46
0.45
0.45
0.44
0.43
0.43
0.42
0.42
0.42
0.42
0.41
0.41
0.41
0.41
0.41
0.41
0.40
0.40
0.40
0.40
0.40
0.40
0.39
0.39
0.39
0.38
0.38
436
218
508
254
1.20
40
25.46
1.003
0.39
0.38
0.37
0.37
0.36
0.36
0.35
0.35
0.35
0.35
0.34
0.34
0.34
0.34
0.34
0.34
0.34
0.33
0.33
0.33
0.33
0.33
0.33
0.33
0.32
0.32
0.32
0.32
372
186
434
217
1.15
510
255
596
298
1.25
56
35.65
1.404
0.55
0.54
0.53
0.52
0.52
0.51
0.50
0.50
0.49
0.49
0.49
0.49
0.48
0.48
0.48
0.48
0.48
0.47
0.47
0.47
0.47
0.47
0.46
0.46
0.46
0.45
0.45
0.45
598
299
696
348
1.30
698
349
800
400
1.35
64
40.74
1.604
0.63
0.62
0.61
0.60
0.59
0.58
0.57
0.57
0.57
0.56
0.56
0.56
0.55
0.55
0.55
0.55
0.54
0.54
0.54
0.54
0.54
0.53
0.53
0.53
0.52
0.52
0.52
0.51
72
45.84
1.805
0.71
0.69
0.68
0.68
0.67
0.65
0.65
0.64
0.64
0.64
0.63
0.63
0.62
0.62
0.62
0.62
0.61
0.61
0.61
0.61
0.60
0.60
0.60
0.59
0.59
0.58
0.58
80
50.93
2.005
0.79
0.77
0.76
0.75
0.74
0.73
0.72
0.71
0.71
0.71
0.70
0.70
0.69
0.69
0.69
0.69
0.68
0.68
0.68
0.67
0.67
0.67
0.66
0.66
0.66
0.65
0.64
4
0.67
To
11
100
50
104
52
0.70
10
Length (mm)
# of teeth
Length (mm)
# of teeth
9
Belt Width (mm)
Width Multiplier
From
8
Table 33 (Cont.) Rated Torque (Nm) for Small Pulleys - 6 mm Belt Width
For Belt
Length
7
32
20.37
0.802
0.31
0.30
0.30
0.29
0.29
0.28
0.28
0.28
0.28
0.27
0.27
0.27
0.27
0.27
0.27
0.27
0.27
0.26
0.26
0.26
0.26
0.26
0.26
0.26
0.25
0.25
0.25
0.25
28
17.83
0.702
0.27
0.26
0.26
0.25
0.25
0.25
0.24
0.24
0.24
0.24
0.24
0.23
0.23
0.23
0.23
0.23
0.23
0.23
0.23
0.23
0.23
0.23
0.22
0.22
0.22
0.22
0.22
0.22
24
15.28
0.602
0.23
0.22
0.22
0.21
0.21
0.21
0.21
0.20
0.20
0.20
0.20
0.20
0.20
0.20
0.20
0.20
0.19
0.19
0.19
0.19
0.19
0.19
0.19
0.19
0.19
0.19
0.18
0.18
20
12.73
0.501
0.18
0.18
0.18
0.18
0.17
0.17
0.17
0.17
0.17
0.16
0.16
0.16
0.16
0.16
0.16
0.16
0.16
0.16
0.16
0.16
0.16
0.16
0.15
0.15
0.15
0.15
0.15
0.15
18
11.46
0.451
0.16
0.16
0.16
0.16
0.15
0.15
0.15
0.15
0.15
0.15
0.14
0.14
0.14
0.14
0.14
0.14
0.14
0.14
0.14
0.14
0.14
0.14
0.14
0.14
0.13
0.13
0.13
0.13
16
10.19
0.401
0.14
0.14
0.14
0.14
0.13
0.13
0.13
0.13
0.13
0.13
0.13
0.13
0.12
0.12
0.12
0.12
0.12
0.12
0.12
0.12
0.12
0.12
0.12
0.12
0.12
0.12
0.12
0.12
14
8.91
0.351
0.12
0.12
0.12
0.12
0.12
0.11
0.11
0.11
0.11
0.11
0.11
0.11
0.11
0.11
0.11
0.11
0.10
0.10
0.10
0.10
0.10
0.10
0.10
0.10
0.10
0.10
0.10
0.10
12
7.64
0.301
0.10
0.10
0.10
0.10
0.10
0.09
0.09
0.09
0.09
0.09
0.09
0.09
0.09
0.09
0.09
0.09
0.09
0.09
0.09
0.09
0.09
0.08
0.08
0.08
0.08
0.08
0.08
0.08
Number of Grooves
Pitch
mm
Diameter
inches
10
20
40
60
100
200
300
400
500
600
rpm
800
of
1000
Fastest
1200
Shaft
1400
1600
[Tabulated
1800
values are
2000
in Nm]
2400
2800
3200
3600
4000
5000
6000
8000
10000
12000
14000
I

6
1.00
9
1.50
12
2.00
16
7.64
0.301
14.02
12.82
11.62
10.91
10.03
8.83
8.12
7.63
7.24
6.92
6.43
6.04
5.72
5.46
5.22
5.02
4.84
4.52
4.25
4.02
3.81
3.63
3.24
2.91
2.40
1.99
1.64
1.34
18
8.91
0.351
16.27
14.92
13.57
12.78
11.78
10.43
9.64
9.08
8.65
8.29
7.73
7.30
6.94
6.64
6.38
6.15
5.94
5.59
5.28
5.02
4.79
4.58
4.14
3.77
3.19
2.72
2.32
1.98
20
10.19
0.401
18.50
17.00
15.50
14.62
13.51
12.01
11.14
10.51
10.03
9.64
9.01
8.53
8.14
7.80
7.51
7.26
7.03
6.63
6.29
6.00
5.74
5.51
5.02
4.61
3.95
3.42
2.97
2.57
22
11.46
0.451
20.70
19.05
17.40
16.44
15.22
13.57
12.61
11.92
11.39
10.96
10.27
9.74
9.31
8.94
8.62
8.34
8.09
7.65
7.28
6.96
6.67
6.42
5.87
5.42
4.69
4.10
3.59
3.13
24
12.73
0.501
22.89
21.09
19.29
18.24
16.91
15.11
14.06
13.32
12.74
12.26
11.52
10.94
10.46
10.06
9.71
9.40
9.13
8.65
8.25
7.90
7.58
7.30
6.71
6.21
5.40
4.74
4.17
3.66
26
15.28
0.602
25.06
23.11
21.16
20.02
18.59
16.64
15.50
14.69
14.06
13.55
12.74
12.11
11.60
11.16
10.78
10.45
10.15
9.64
9.20
8.81
8.48
8.17
7.52
6.98
6.09
5.36
4.73
4.15
30
17.83
0.702
29.38
27.13
24.88
23.56
21.90
19.65
18.34
17.40
16.68
16.09
15.15
14.43
13.83
13.33
12.89
12.51
12.16
11.56
11.05
10.61
10.22
9.86
9.10
8.46
7.41
6.53
5.75
5.03
For Belt
Length
From
Length (mm)
# of teeth
Length (mm)
# of teeth
348
116
405
135
1.05
34
20.37
0.802
33.61
31.06
28.51
27.02
25.14
22.59
21.10
20.04
19.22
18.55
17.49
16.67
15.99
15.42
14.93
14.49
14.10
13.42
12.84
12.33
11.88
11.48
10.60
9.86
8.63
7.59
6.64
5.75
120 129 153 180 213 252 294

43
40
51
60
71
84
98
150
126
177
210
249
291
345
To
50
42
59
70
83
97 115
0.70 0.75 0.80 0.85 0.90 0.95 1.00
Shaded area indicates drive conditions where reduced service life can be expected.
Number of Grooves
Pitch
mm
Diameter
inches
10
20
40
60
100
200
300
400
500
600
rpm
800
of
1000
Fastest
1200
Shaft
1400
1600
[Tabulated
1800
values are
2000
in lbf in.]
2400
2800
3200
3600
4000
5000
6000
8000
10000
12000
14000
408
136
477
159
1.10
38
22.92
0.902
37.82
34.97
32.12
30.45
28.35
25.50
23.83
22.65
21.73
20.98
19.79
18.87
18.12
17.48
16.93
16.44
16.00
15.23
14.58
14.01
13.50
13.04
12.05
11.20
9.77
8.55
7.41
6.33
567
189
663
221
1.20
44
25.46
1.003
44.00
40.70
37.41
35.48
33.04
29.74
27.81
26.44
25.38
24.51
23.14
22.07
21.20
20.46
19.81
19.24
18.73
17.84
17.08
16.41
15.81
15.27
14.09
13.07
11.33
9.78
8.32
6.89
56
35.65
1.404
56.15
51.95
47.75
45.30
42.20
38.00
35.54
33.80
32.45
31.34
29.59
28.23
27.11
26.16
25.34
24.60
23.94
22.79
21.80
20.93
20.14
19.41
17.81
16.40
13.89
11.54
64
40.74
1.604
64.10
59.30
54.50
51.69
48.15
43.35
40.54
38.55
37.00
35.73
33.73
32.17
30.89
29.80
28.85
28.01
27.25
25.91
24.76
23.74
22.81
21.95
20.04
18.32
15.17
12.13
72
45.84
1.805
71.93
66.53
61.13
57.98
54.00
48.60
45.43
43.19
41.45
40.02
37.76
36.00
34.56
33.32
32.25
31.29
30.43
28.90
27.58
26.40
25.32
24.32
22.05
19.98
16.09
666 786
924 1092
222 262
308 364
783 921 1089 1200
261 307
363 400
1.25 1.30 1.35 1.40
50
30.56
1.203
50.13
46.38
42.63
40.44
37.67
33.92
31.73
30.17
28.96
27.97
26.41
25.20
24.20
23.36
22.62
21.97
21.39
20.37
19.49
18.72
18.03
17.40
16.02
14.81
12.70
10.79
8.93
80
50.93
2.005
79.67
73.68
67.68
64.17
59.74
53.74
50.23
47.73
45.79
44.21
41.69
39.73
38.12
36.74
35.54
34.46
33.49
31.77
30.27
28.92
27.68
26.52
23.86
21.39
16.64
Table 33 (Cont.) Rated Torque (lbf in.) for Small Pulleys - 6 mm Belt Width
Belt Width (mm)
15
6
9
12
Width Multiplier 1.00
2.50
1.50
2.00
T-69
R
T
1
10
11
12
13
14
15
16
13
14
15
16
T-70
To
12
153
51
177
59
0.80
213
71
249
83
0.90
180
60
210
70
0.85
252
84
291
97
0.95
294
98
345
115
1.00
348
116
405
135
1.05
408
136
477
159
1.10
50
47.75
1.880
5.66
5.24
4.82
4.57
4.26
3.83
3.58
3.41
3.27
3.16
2.98
2.85
2.73
2.64
2.56
2.48
2.42
2.30
2.20
2.12
2.04
1.97
1.81
1.67
1.44
1.22
1.01
567
189
663
221
1.20
44
42.02
1.654
4.97
4.60
4.23
4.01
3.73
3.36
3.14
2.99
2.87
2.77
2.61
2.49
2.40
2.31
2.24
2.17
2.12
2.02
1.93
1.85
1.79
1.73
1.59
1.48
1.28
1.11
0.94
0.78
480
160
564
188
1.15
666
222
783
261
1.25
56
53.48
2.105
6.34
5.87
5.40
5.12
4.77
4.29
4.02
3.82
3.67
3.54
3.34
3.19
3.06
2.96
2.86
2.78
2.71
2.58
2.46
2.36
2.28
2.19
2.01
1.85
1.57
1.30
786
262
921
307
1.30
924
308
1089
363
1.35
64
61.12
2.406
7.24
6.70
6.16
5.84
5.44
4.90
4.58
4.36
4.18
4.04
3.81
3.63
3.49
3.37
3.26
3.16
3.08
2.93
2.80
2.68
2.58
2.48
2.26
2.07
1.71
1.37
1092
364
1200
400
1.35
72
68.75
2.707
8.13
7.52
6.91
6.55
6.10
5.49
5.13
4.88
4.68
4.52
4.27
4.07
3.90
3.77
3.64
3.54
3.44
3.27
3.12
2.98
2.86
2.75
2.49
2.26
1.82
80
76.39
3.008
9.00
8.32
7.35
7.25
6.75
6.07
5.68
5.39
5.17
4.99
4.71
4.49
4.31
4.15
4.02
3.89
3.78
3.59
3.42
3.27
3.13
3.00
2.70
2.42
1.88
9
1.50
129
43
150
50
0.75
38
36.29
1.429
4.27
3.95
3.63
3.44
3.20
2.88
2.69
2.56
2.45
2.37
2.24
2.13
2.05
1.97
1.91
1.86
1.81
1.72
1.65
1.58
1.53
1.47
1.36
1.27
1.10
0.97
0.84
0.72
6
1.00
11
120
40
126
42
0.70
10
Length (mm)
# of teeth
Length (mm)
# of teeth
9
Belt Width (mm)
Width Multiplier
From
8
For Belt
Length
7
34
32.47
1.278
3.80
3.51
3.22
3.05
2.84
2.55
2.38
2.26
2.17
2.10
1.98
1.88
1.81
1.74
1.69
1.64
1.59
1.52
1.45
1.39
1.34
1.30
1.20
1.11
0.97
0.86
0.75
0.65
30
28.65
1.128
3.32
3.06
2.81
2.66
2.47
2.22
2.07
1.97
1.88
1.82
1.71
1.63
1.56
1.51
1.46
1.41
1.37
1.31
1.25
1.20
1.15
1.11
1.03
0.96
0.84
0.74
0.65
0.57
26
24.83
0.977
2.83
2.61
2.39
2.26
2.10
1.88
1.75
1.66
1.59
1.53
1.44
1.37
1.31
1.26
1.22
1.18
1.15
1.09
1.04
1.00
0.96
0.92
0.85
0.79
0.69
0.61
0.53
0.47
24
22.92
0.902
2.59
2.38
2.18
2.06
1.91
1.71
1.59
1.50
1.44
1.39
1.30
1.24
1.18
1.14
1.10
1.06
1.03
0.98
0.93
0.89
0.86
0.83
0.76
0.70
0.61
0.54
0.47
0.41
22
21.01
0.827
2.34
2.15
1.97
1.86
1.72
1.53
1.42
1.35
1.29
1.24
1.16
1.10
1.05
1.01
0.97
0.94
0.91
0.86
0.82
0.79
0.75
0.73
0.66
0.61
0.53
0.46
0.41
0.35
20
19.10
0.752
2.09
1.92
1.75
1.65
1.53
1.36
1.26
1.19
1.13
1.09
1.02
0.96
0.92
0.88
0.85
0.82
0.79
0.75
0.71
0.68
0.65
0.62
0.57
0.52
0.45
0.39
0.34
0.29
18
17.19
0.677
1.84
1.69
1.53
1.44
1.33
1.18
1.09
1.03
0.98
0.94
0.87
0.82
0.78
0.75
0.72
0.69
0.67
0.63
0.60
0.57
0.54
0.52
0.47
0.43
0.36
0.31
0.26
0.22
16
15.28
0.602
1.58
1.45
1.31
1.23
1.13
1.00
0.92
0.86
0.82
0.78
0.73
0.68
0.65
0.62
0.59
0.57
0.55
0.51
0.48
0.45
0.43
0.41
0.37
0.33
0.27
0.22
0.19
0.15
Number of Grooves
Pitch
mm
Diameter
inches
10
20
40
60
100
200
300
400
500
600
rpm
800
of
1000
Fastest
1200
Shaft
1400
1600
[Tabulated
1800
values are
2000
in Nm]
2400
2800
3200
3600
4000
5000
6000
8000
10000
12000
14000
I

12
2.00
15
2.50
18
28.65
1.128
78.24
72.38
66.53
63.11
58.80
52.94
49.52
47.09
45.20
43.66
41.22
39.33
37.78
36.47
35.33
34.32
33.41
31.84
30.49
29.31
28.26
27.31
25.23
23.45
20.43
17.77
15.29
12.88
20
31.83
1.253
93.61
87.11
80.60
76.80
72.01
65.51
61.70
59.00
56.91
55.19
52.49
50.38
48.66
47.20
45.93
44.80
43.79
42.03
40.53
39.20
38.02
36.94
34.58
32.55
29.03
25.88
22.88
19.91
22
35.01
1.379
109.00
101.80
94.69
90.51
85.23
78.08
73.89
70.92
68.61
66.73
63.74
61.43
59.53
57.92
56.51
55.27
54.16
52.20
50.53
49.06
47.74
46.53
43.88
41.56
37.50
33.79
30.19
26.56
24
38.20
1.504
124.20
116.40
108.60
104.00
98.27
90.46
85.90
82.65
80.14
78.08
74.83
72.30
70.22
68.46
66.93
65.57
64.34
62.20
60.36
58.73
57.27
55.93
52.96
50.35
45.69
41.35
37.07
32.69
26
41.38
1.629
139.30
130.90
122.40
117.50
111.20
102.80
97.83
94.31
91.59
89.36
85.83
83.09
80.83
78.92
77.25
75.77
74.44
72.10
70.09
68.31
66.70
65.21
61.91
58.98
53.67
48.63
43.57
38.34
28
44.56
1.754
154.30
145.20
136.10
130.80
124.10
115.00
109.70
105.90
103.00
100.60
96.76
93.80
91.37
89.31
87.50
85.90
84.46
81.92
79.73
77.79
76.02
74.39
70.74
67.46
61.43
55.06
49.67
43.46
32
50.93
2.005
184.30
173.90
163.50
157.50
149.80
139.40
133.30
129.00
125.60
122.90
118.50
115.10
112.30
109.90
107.90
106.00
104.30
101.40
98.84
96.54
94.45
92.50
88.07
84.01
76.33
68.66
60.63
From
Length (mm)
# of teeth
Length (mm)
# of teeth
780
156
930
186
1.05
935
187
1125
225
1.10
44
70.03
2.757
272.90
258.60
244.30
235.90
225.40
211.10
202.70
196.70
192.10
188.30
182.30
177.60
173.70
170.30
167.40
164.70
162.30
158.00
154.20
150.70
147.40
144.30
136.90
129.70
115.00
56
89.13
3.509
359.90
341.70
323.50
312.90
299.50
281.20
270.60
263.00
257.00
252.20
244.40
238.30
233.30
228.90
225.00
221.50
218.20
212.30
206.90
201.80
197.00
192.30
180.60
168.70
64
101.86
4.010
417.20
396.40
375.60
363.40
348.10
327.30
315.10
306.40
299.60
294.00
285.10
278.00
272.10
267.00
262.40
258.20
254.40
247.20
240.60
234.20
228.10
222.00
206.70
190.60
80
127.32
5.013
530.60
504.60
478.50
463.30
444.10
418.10
402.80
391.80
383.30
376.20
364.90
355.90
348.20
341.40
335.30
329.60
324.20
314.10
304.40
294.90
285.30
275.70
72
114.59
4.511
474.10
450.60
427.20
413.50
396.30
372.80
359.10
349.30
341.60
335.30
325.20
317.20
310.40
304.50
299.20
294.30
289.70
281.10
273.10
265.30
257.60
249.80
230.00
1130 1355 1625 1960

226 271 325 392
1350 1620 1955 2000
391 400
270 324
1.15 1.20 1.25 1.30
48
76.39
3.008
302.10
286.50
270.90
261.80
250.30
234.70
225.50
219.00
213.90
209.80
203.20
198.00
193.70
190.10
186.80
183.90
181.20
176.40
172.10
168.10
164.30
160.70
152.10
143.50
125.60
9
0.60
For Belt
Length
40
63.66
2.506
243.60
230.60
217.60
209.90
200.40
187.40
179.70
174.30
170.10
166.70
161.20
156.90
153.40
150.40
147.80
145.40
143.20
139.40
136.00
132.90
130.10
127.40
121.10
115.10
103.10
Belt Width (mm)

Width Multiplier
650
130
775
155
1.00
36
57.30
2.256
214.10
202.40
190.70
183.90
175.20
163.50
156.70
151.80
148.00
144.90
140.00
136.20
133.00
130.30
128.00
125.90
124.00
120.60
117.60
115.00
112.50
110.20
104.90
99.93
90.27
80.34
(see Table 36 for hp or KW ratings)
200 215 260 315 375 450 540

90 108
75
63
52
43
40
645
535
445
370
310
255
210
To
89 107 129
74
62
51
42
0.65 0.70 0.75 0.80 0.85 0.90 0.95
Number of Grooves
Pitch
mm
Diameter
inches
10
20
40
60
100
200
300
400
500
600
rpm
800
of
1000
Fastest
1200
Shaft
1400
1600
[Tabulated
1800
values are
2000
in lbf in.]
2400
2800
3200
3600
4000
5000
6000
8000
10000
12000
14000

15
1.00
20
1.33
T-71
25
1.67
R
T
10
11
12
13
14
15
16
10
11
12
13
14
15
16
T-72
For Belt
Length
From
Length (mm)
# of teeth
Length (mm)
# of teeth
200 215 260 315 375 450 540

90 108
75
63
52
43
40
210 255 310 370 445 535 645
To
89 107 129
74
62
51
42
0.65 0.70 0.75 0.80 0.85 0.90 0.95
650
130
775
155
1.00
36
57.30
2.256
24.19
22.87
21.55
20.77
19.80
18.48
17.70
17.15
16.72
16.37
15.82
15.39
15.03
14.73
14.46
14.22
14.01
13.62
13.29
12.99
12.71
12.45
11.85
11.29
10.20
9.08
780
156
930
186
1.05
40
63.66
2.506
27.52
26.05
24.58
23.72
22.64
21.17
20.31
19.70
19.22
18.83
18.21
17.73
17.33
16.99
16.69
16.43
16.18
15.75
15.37
15.02
14.70
14.40
13.68
13.01
11.65
32
50.93
2.005
20.83
19.65
18.48
17.79
16.92
15.75
15.06
14.57
14.19
13.88
13.39
13.01
12.69
12.42
12.19
11.98
11.79
11.46
11.17
10.91
10.67
10.45
9.95
9.49
8.62
7.76
6.85
48
76.39
3.008
34.14
32.37
30.61
29.58
28.28
26.51
25.48
24.74
24.17
23.70
22.96
22.37
21.89
21.47
21.11
20.78
20.47
19.93
19.44
18.99
18.57
18.16
17.18
16.21
14.20
1130
226
1350
270
1.15
44
70.03
2.757
30.84
29.22
27.60
26.66
25.47
23.85
22.90
22.23
21.71
21.28
20.60
20.06
19.62
19.24
18.91
18.61
18.34
17.85
17.42
17.02
16.65
16.30
15.46
14.65
12.99
935
187
1125
225
1.10
28
44.56
1.754
17.44
16.41
15.38
14.78
14.02
12.99
12.39
11.96
11.63
11.36
10.93
10.60
10.32
10.09
9.89
9.71
9.54
9.26
9.01
8.79
8.59
8.41
7.99
7.62
6.94
6.28
5.61
4.91
56
89.13
3.509
40.67
38.61
36.55
35.35
33.83
31.78
30.57
29.71
29.04
28.49
27.62
26.93
26.36
25.86
25.42
25.02
24.65
23.98
23.38
22.80
22.26
21.72
20.41
19.06
1355
271
1620
324
1.20
26
41.38
1.629
15.74
14.78
13.83
13.27
12.57
11.61
11.05
10.66
10.35
10.10
9.70
9.39
9.13
8.92
8.73
8.56
8.41
8.15
7.92
7.72
7.54
7.37
7.00
6.66
6.06
5.49
4.92
4.33
1625
325
1955
391
1.25
1960
392
2000
400
1.30
64
72
80
101.86 114.59 127.32
4.010 4.511 5.013
47.14 53.56 59.95
44.79 50.92 57.01
42.44 48.27 54.07
41.06 46.72 52.35
39.33 44.77 50.18
36.98 42.13 47.24
35.60 40.57 45.51
34.61 39.46 44.27
33.85 38.60 43.31
33.22 37.88 42.51
32.21 36.74 41.23
31.41 35.84 40.21
30.75 35.07 39.34
30.17 34.40 38.58
29.65 33.80 37.89
29.18 33.25 37.24
28.74 32.73 36.63
27.93 31.76 35.49
27.18 30.85 34.39
26.47 29.97 33.32
25.77 29.10 32.24
25.08 28.23 31.15
23.35 25.99
21.54
24
38.20
1.504
14.03
13.15
12.27
11.75
11.10
10.22
9.71
9.34
9.05
8.82
8.45
8.17
7.93
7.73
7.56
7.41
7.27
7.03
6.82
6.64
6.47
6.32
5.98
5.69
5.16
4.67
4.19
3.69
22
35.01
1.379
12.32
11.51
10.70
10.23
9.63
8.82
8.38
8.01
7.75
7.54
7.20
6.94
6.73
6.54
6.39
6.24
6.12
5.90
5.71
5.54
5.39
5.26
4.96
4.70
4.24
3.82
3.41
3.00
20
31.83
1.253
10.58
9.84
9.11
8.68
8.14
7.40
6.97
6.67
6.43
6.24
5.93
5.69
5.50
5.33
5.19
5.06
4.95
4.75
4.58
4.43
4.30
4.17
3.91
3.68
3.28
2.92
2.59
2.25
18
28.65
1.128
8.84
8.18
7.52
7.13
6.64
5.98
5.59
5.32
5.11
4.93
4.66
4.44
4.27
4.12
3.99
3.88
3.78
3.60
3.45
3.31
3.19
3.09
2.85
2.65
2.31
2.01
1.73
1.45
Number of Grooves
Pitch
mm
Diameter
inches
10
20
40
60
100
200
300
400
500
600
rpm
800
of
1000
Fastest
1200
Shaft
1400
1600
[Tabulated
1800
values are
2000
in Nm]
2400
2800
3200
3600
4000
5000
6000
8000
10000
12000
14000
I
Belt Width (mm)
15
20
25
9
1.00
1.33
Width Multiplier 0.60
1.67
18
28.65
1.128
0.01
0.02
0.04
0.06
0.09
0.17
0.24
0.30
0.36
0.42
0.52
0.62
0.72
0.81
0.90
0.98
1.06
1.21
1.35
1.49
1.61
1.73
2.00
2.23
2.59
2.82
2.91
2.86
20
31.83
1.253
0.01
0.03
0.05
0.07
0.11
0.21
0.29
0.37
0.45
0.53
0.67
0.80
0.93
1.05
1.17
1.28
1.39
1.60
1.80
1.99
2.17
2.34
2.74
3.10
3.69
4.11
4.36
4.42
22
35.01
1.379
0.02
0.03
0.06
0.09
0.14
0.25
0.35
0.45
0.54
0.64
0.81
0.97
1.13
1.29
1.43
1.58
1.72
1.99
2.24
2.49
2.73
2.95
3.48
3.96
4.76
5.36
5.75
5.90
24
38.20
1.504
0.02
0.04
0.07
0.10
0.16
0.29
0.41
0.52
0.64
0.74
0.95
1.15
1.34
1.52
1.70
1.87
2.04
2.37
2.68
2.98
3.27
3.55
4.20
4.79
5.80
6.56
7.06
7.26
26
41.38
1.629
0.02
0.04
0.08
0.11
0.18
0.33
0.47
0.60
0.73
0.85
1.09
1.32
1.54
1.75
1.96
2.16
2.36
2.75
3.11
3.47
3.81
4.14
4.91
5.62
6.81
7.72
8.30
8.52
28
44.56
1.754
0.02
0.05
0.09
0.12
0.20
0.36
0.52
0.67
0.82
0.96
1.23
1.49
1.74
1.98
2.22
2.45
2.68
3.12
3.54
3.95
4.34
4.72
5.61
6.42
7.80
8.82
9.46
9.65
32
50.93
2.005
0.03
0.06
0.10
0.15
0.24
0.44
0.63
0.82
1.00
1.17
1.50
1.83
2.14
2.44
2.74
3.03
3.31
3.86
4.39
4.90
5.40
5.87
6.99
8.00
9.69
10.89
11.54
For Belt
Length
From
Length (mm)
# of teeth
Length (mm)
# of teeth
650
130
775
155
1.00
36
57.30
2.256
0.03
0.06
0.12
0.18
0.28
0.52
0.75
0.96
1.17
1.38
1.78
2.16
2.53
2.90
3.25
3.59
3.93
4.59
5.23
5.84
6.43
6.99
8.32
9.51
11.46
12.75
200 215 260 315 375 450 540

90 108
75
63
52
43
40
645
535
445
370
310
255
210
To
89 107 129
74
62
51
42
0.65 0.70 0.75 0.80 0.85 0.90 0.95
Number of Grooves
Pitch
mm
Diameter
inches
10
20
40
60
100
200
300
400
500
600
rpm
800
of
1000
Fastest
1200
Shaft
1400
1600
[Tabulated
1800
values are
2000
in hp]
2400
2800
3200
3600
4000
5000
6000
8000
10000
12000
14000
780
156
930
186
1.05
40
63.66
2.506
0.04
0.07
0.14
0.20
0.32
0.59
0.86
1.11
1.35
1.59
2.05
2.49
2.92
3.34
3.75
4.15
4.55
5.31
6.04
6.75
7.43
8.09
9.61
10.96
13.09
56
89.13
3.509
0.06
0.11
0.21
0.30
0.48
0.89
1.29
1.67
2.04
2.40
3.10
3.78
4.44
5.08
5.71
6.32
6.92
8.08
9.19
10.25
11.25
12.20
14.33
16.06
64
72
80
101.86 114.59 127.32
4.010 4.511 5.013
0.07
0.08
0.08
0.13
0.14
0.16
0.24
0.27
0.30
0.35
0.39
0.44
0.55
0.63
0.70
1.04
1.18
1.33
1.50
1.71
1.92
1.94
2.22
2.49
2.38
2.71
3.04
2.80
3.19
3.58
3.62
4.13
4.63
4.41
5.03
5.65
5.18
5.91
6.63
5.93
6.76
7.58
6.66
7.60
8.51
7.38
8.40
9.41
8.07
9.19 10.29
9.41 10.70 11.96
10.69 12.13 13.52
11.89 13.47 14.97
13.03 14.71 16.30
14.09 15.86 17.50
16.40 18.25
18.15
1130 1355 1625 1960

226 271 325 392
1350 1620 1955 2000
391 400
270 324
1.15 1.20 1.25 1.30
48
76.39
3.008
0.05
0.09
0.17
0.25
0.40
0.74
1.07
1.39
1.70
2.00
2.58
3.14
3.69
4.22
4.74
5.25
5.75
6.72
7.64
8.53
9.39
10.20
12.06
13.66
15.95
935
187
1125
225
1.10
44
70.03
2.757
0.04
0.08
0.16
0.22
0.36
0.67
0.96
1.25
1.52
1.79
2.31
2.82
3.31
3.78
4.25
4.71
5.15
6.02
6.85
7.65
8.42
9.16
10.86
12.34
14.59
Table 36 Rated Horsepower for Small Pulleys - 15 mm Belt Width

The following table represents the horsepower ratings for each belt, in its
base width, at the predetermined number of grooves, pitch diameters and
Belt Width (mm)
15
20
25
9
rpm's. These ratings must be multiplied by the appropriate width factor
1.33 1.67
Width Multiplier 0.60 1.00
and applicable belt length factor to obtain the corrected horsepower
rating (see Step 7 of SECTION 24, on page T-65). See Table 35 for torque
ratings.
T-73
R
T
1
10
11
12
13
14
15
16
10
11
12
13
14
15
16
T-74
For Belt
Length
From
Length (mm)
# of teeth
Length (mm)
# of teeth
200 215 260 315 375 450 540

90 108
75
63
52
43
40
210 255 310 370 445 535 645
To
89 107 129
74
62
51
42
0.65 0.70 0.75 0.80 0.85 0.90 0.95
650
130
775
155
1.00
36
57.30
2.256
0.03
0.05
0.09
0.13
0.21
0.39
0.56
0.72
0.88
1.03
1.33
1.61
1.89
2.16
2.42
2.68
2.93
3.42
3.90
4.35
4.79
5.22
6.21
7.09
8.54
9.51
780
156
930
186
1.05
40
63.66
2.506
0.03
0.05
0.10
0.15
0.24
0.44
0.64
0.83
1.01
1.18
1.53
1.86
2.18
2.49
2.80
3.10
3.39
3.96
4.51
5.03
5.54
6.03
7.16
8.17
9.76
32
50.93
2.005
0.02
0.04
0.08
0.11
0.18
0.33
0.47
0.61
0.74
0.87
1.12
1.36
1.59
1.82
2.04
2.26
2.47
2.88
3.27
3.66
4.02
4.38
5.21
5.96
7.23
8.12
8.61
48
76.39
3.008
0.04
0.07
0.13
0.19
0.30
0.56
0.80
1.04
1.27
1.49
1.92
2.34
2.75
3.15
3.54
3.92
4.29
5.01
5.70
6.36
7.00
7.61
9.00
10.19
11.89
1130
226
1350
270
1.15
44
70.03
2.757
0.03
0.06
0.12
0.17
0.27
0.50
0.72
0.93
1.14
1.34
1.73
2.10
2.47
2.82
3.17
3.51
3.84
4.49
5.11
5.71
6.28
6.83
8.10
9.20
10.88
935
187
1125
225
1.10
28
44.56
1.754
0.02
0.03
0.06
0.09
0.15
0.27
0.39
0.50
0.61
0.71
0.92
1.11
1.30
1.48
1.66
1.83
2.00
2.33
2.64
2.95
3.24
3.52
4.18
4.79
5.81
6.58
7.05
7.20
56
89.13
3.509
0.04
0.08
0.15
0.22
0.35
0.67
0.96
1.24
1.52
1.79
2.31
2.82
3.31
3.79
4.26
4.72
5.16
6.03
6.85
7.64
8.39
9.10
10.68
11.98
1355
271
1620
324
1.20
26
41.38
1.629
0.02
0.03
0.06
0.08
0.13
0.24
0.35
0.45
0.54
0.63
0.81
0.98
1.15
1.31
1.46
1.61
1.76
2.05
2.32
2.59
2.84
3.09
3.66
4.19
5.08
5.75
6.19
6.35
1625
325
1955
391
1.25
1960
392
2000
400
1.30
64
72
80
101.86 114.59 127.32
4.010 4.511 5.013
0.05
0.06
0.06
0.09
0.11
0.12
0.18
0.20
0.23
0.26
0.29
0.33
0.41
0.47
0.53
0.77
0.88
0.99
1.12
1.27
1.43
1.45
1.65
1.85
1.77
2.02
2.27
2.09
2.38
2.67
2.70
3.08
3.45
3.29
3.75
4.21
3.86
4.41
4.94
4.42
5.04
5.66
4.97
5.66
6.35
5.50
6.27
7.02
6.02
6.85
7.67
7.02
7.98
8.92
7.97
9.05 10.08
8.87 10.04 11.16
9.72 10.97 12.15
10.51 11.82 13.05
12.23 13.61
13.53
24
38.20
1.504
0.01
0.03
0.05
0.07
0.12
0.21
0.30
0.39
0.47
0.55
0.71
0.86
1.00
1.13
1.27
1.40
1.52
1.77
2.00
2.22
2.44
2.65
3.13
3.57
4.32
4.89
5.26
5.42
22
35.01
1.379
0.01
0.02
0.04
0.06
0.10
0.18
0.26
0.34
0.41
0.47
0.60
0.73
0.85
0.96
1.07
1.18
1.28
1.48
1.67
1.86
2.03
2.20
2.60
2.95
3.55
4.00
4.29
4.40
20
31.83
1.253
0.01
0.02
0.04
0.05
0.09
0.16
0.22
0.28
0.34
0.39
0.50
0.60
0.69
0.78
0.87
0.95
1.04
1.19
1.34
1.48
1.62
1.75
2.05
2.31
2.75
3.06
3.25
3.30
18
28.65
1.128
0.01
0.02
0.03
0.04
0.07
0.13
0.18
0.22
0.27
0.31
0.39
0.47
0.54
0.60
0.67
0.73
0.79
0.90
1.01
1.11
1.20
1.29
1.49
1.67
1.93
2.10
2.17
2.13
Number of Grooves
Pitch
mm
Diameter
inches
10
20
40
60
100
200
300
400
500
600
rpm
800
of
1000
Fastest
1200
Shaft
1400
1600
[Tabulated
1800
values are
2000
in kW]
2400
2800
3200
3600
4000
5000
6000
8000
10000
12000
14000
I
Table 36 (Cont.) Rated Kilowatts for Small Pulleys - 15 mm Belt Width

The following table represents the horsepower ratings for each belt, in its
base width, at the predetermined number of grooves, pitch diameters and
Belt Width (mm)
25
9
15
20
Width Multiplier 0.60 1.00
1.33 1.67
and applicable belt length factor to obtain the corrected horsepower
rating (see Step 7 of SECTION 24, on page T-65). See Table 45 for torque
ratings.
Number of Grooves
Pitch
mm
Diameter inches
10
20
40
60
100
200
300
400
500
rpm
600
of
700
Fastest
800
Shaft
870
[Tabulated 1000
values are 1160
1450
in lbf in.]
1600
1750
2000
2500
3000
3500
5000
8000
10000
10
28.65
1.128
3.3
3.3
3.3
3.3
3.3
3.3
3.0
2.8
2.7
2.6
2.5
2.4
2.4
2.3
2.2
2.1
2.0
2.0
1.9
1.9
1.8
1.7
1.6
1.4
1.3
12
31.83
1.253
4.0
4.0
4.0
4.0
4.0
4.0
3.7
3.4
3.3
3.1
3.0
2.9
2.9
2.8
2.7
2.6
2.5
2.5
2.4
2.3
2.2
2.1
1.9
1.7
1.6
16
38.20
1.504
5.6
5.6
5.6
5.6
5.6
5.6
5.1
4.8
4.5
4.3
4.2
4.1
4.0
3.9
3.7
3.5
3.4
3.4
3.3
3.1
3.0
2.9
2.6
2.3
2.2
Shaded area indicates drive

conditions where reduced service
life can be expected.
144
48
195
65
0.80
34
63.66
2.506
14.5
14.5
14.5
14.5
14.5
14.5
13.0
12.0
11.3
10.8
10.4
10.0
9.8
9.4
9.1
8.5
8.3
8.1
7.8
7.4
7.0
6.7
6.0
5.1
4.6
38
70.03
2.757
16.8
16.8
16.8
16.8
16.8
16.8
15.0
13.9
13.1
12.4
11.9
11.5
11.2
10.8
10.4
9.8
9.5
9.3
8.9
8.4
8.0
7.6
6.8
5.7
5.1
44
76.39
3.008
20.5
20.5
20.5
20.5
20.5
20.5
18.3
16.9
15.8
15.0
14.4
13.9
13.5
13.0
12.5
11.7
11.4
11.1
10.7
10.0
9.4
9.0
8.0
6.6
5.7
50
89.13
3.509
24.6
24.6
24.6
24.6
24.6
24.6
21.8
20.0
18.8
17.8
17.0
16.3
15.9
15.3
14.6
13.7
13.3
12.9
12.4
11.6
11.0
10.4
9.2
7.3
6.3
600
198 264 408
200
88 136
66
261 405 597 603 & up
87 135 199 201 & up
1.20
0.90 1.00 1.10
30
57.30
2.256
12.3
12.3
12.3
12.3
12.3
12.3
11.1
10.3
9.7
9.2
8.9
8.6
8.4
8.1
7.8
7.3
7.2
7.0
6.7
6.4
6.1
5.8
5.2
4.5
4.1
56
62
72
80
101.86 114.59 127.32 127.32
4.010 4.511 5.013 5.013
27.7
30.7
35.7
39.6
27.7
30.7
35.7
39.6
27.7
30.7
35.7
39.6
27.7
30.7
35.7
39.6
27.7
30.7
35.7
39.6
27.7
30.7
35.7
39.6
24.6
27.3
31.6
35.2
22.6
25.0
29.1
32.3
21.2
23.4
27.2
30.2
20.1
22.2
25.8
28.6
19.2
21.2
24.6
27.4
18.4
20.4
23.7
26.3
18.0
19.9
23.1
25.6
17.2
19.1
22.1
24.6
16.5
18.2
21.2
23.5
15.4
17.1
19.8
22.0
15.0
16.5
19.2
21.3
14.6
16.1
18.7
20.7
14.0
15.4
17.9
19.8
13.0
14.4
16.6
18.4
12.3
13.5
15.6
17.3
11.7
12.8
14.8
16.3
10.2
11.1
12.7
13.8
8.0
8.5
9.1
9.3
6.6
6.8
6
1.00
To
26
50.93
2.005
10.2
10.2
10.2
10.2
10.2
10.2
9.2
8.6
8.1
7.7
7.4
7.2
7.0
6.8
6.5
6.2
6.0
5.9
5.7
5.4
5.1
4.9
4.5
3.9
3.6
Length (mm)
# of teeth
Length (mm)
# of teeth
22
44.56
1.754
8.3
8.3
8.3
8.3
8.3
8.3
7.5
7.0
6.6
6.3
6.1
5.9
5.8
5.6
5.4
5.1
5.0
4.9
4.7
4.4
4.2
4.1
3.7
3.3
3.0
Belt Width (mm)
Width Multiplier
From
18
41.38
1.629
6.5
6.5
6.5
6.5
6.5
6.5
5.9
5.5
5.2
5.0
4.8
4.7
4.6
4.4
4.3
4.0
3.9
3.9
3.7
3.5
3.4
3.3
3.0
2.6
2.5
The following table represents the torque ratings for each belt, in its base
width, at the predetermined number of grooves, pitch diameters and
and applicable belt length factor to obtain the corrected torque rating
(see Step 7 of SECTION 24, on page T-65).
For Belt
Length
14
35.01
1.379
4.8
4.8
4.8
4.8
4.8
4.8
4.4
4.1
3.9
3.7
3.6
3.5
3.4
3.3
3.2
3.0
3.0
2.9
2.8
2.7
2.6
2.5
2.3
2.0
1.9
3 mm Pitch PowerGrip HTD Belts

9
1.66
15
2.97
T-75
R
T
1
10
11
12
13
14
15
16
13
14
15
16
T-76
To
12
264
88
405
135
1.00
198
66
261
87
0.90
11
144
48
195
65
0.80
10
Length (mm)
# of teeth
Length (mm)
# of teeth
From
408
136
597
199
1.10
8
600
200
603 & up
201 & up
1.20
38
36.29
1.429
1.9
1.9
1.9
1.9
1.9
1.9
1.7
1.6
1.5
1.4
1.3
1.3
1.3
1.2
1.2
1.1
1.1
1.0
1.0
0.9
0.9
0.9
0.8
0.6
0.6
44
42.02
1.654
2.3
2.3
2.3
2.3
2.3
2.3
2.1
1.9
1.8
1.7
1.6
1.6
1.5
1.5
1.4
1.3
1.3
1.3
1.2
1.1
1.1
1.0
0.9
0.7
0.6
50
47.75
1.880
2.8
2.8
2.8
2.8
2.8
2.8
2.5
2.3
2.1
2.0
1.9
1.8
1.8
1.7
1.7
1.5
1.5
1.5
1.4
1.3
1.2
1.2
1.0
0.8
0.7
56
53.48
2.105
3.1
3.1
3.1
3.1
3.1
3.1
2.8
2.6
2.4
2.3
2.2
2.1
2.0
1.9
1.9
1.7
1.7
1.6
1.6
1.5
1.4
1.3
1.2
0.9
0.7
62
59.21
2.331
3.5
3.5
3.5
3.5
3.5
3.5
3.1
2.8
2.6
2.5
2.4
2.3
2.2
2.2
2.1
1.9
1.9
1.8
1.7
1.6
1.5
1.5
1.3
1.0
0.8
72
68.75
2.707
4.0
4.0
4.0
4.0
4.0
4.0
3.6
3.3
3.1
2.9
2.8
2.7
2.6
2.5
2.4
2.2
2.2
2.1
2.0
1.9
1.8
1.7
1.4
1.0
80
76.39
3.008
4.5
4.5
4.5
4.5
4.5
4.5
4.0
3.6
3.4
3.2
3.1
3.0
2.9
2.8
2.7
2.5
2.4
2.3
2.2
2.1
1.9
1.8
1.6
1.1
Shaded area indicates drive conditions where reduced service

life can be expected.
34
32.47
1.278
1.6
1.6
1.6
1.6
1.6
1.6
1.5
1.4
1.3
1.2
1.2
1.1
1.1
1.1
1.0
1.0
0.9
0.9
0.9
0.8
0.8
0.8
0.7
0.6
0.5
For Belt
Length
7
30
28.65
1.128
1.4
1.4
1.4
1.4
1.4
1.4
1.2
1.2
1.1
1.0
1.0
1.0
0.9
0.9
0.9
0.8
0.8
0.8
0.8
0.7
0.7
0.7
0.6
0.5
0.5
26
24.83
.977
1.2
1.2
1.2
1.2
1.2
1.2
1.0
1.0
0.9
0.9
0.8
0.8
0.8
0.8
0.7
0.7
0.7
0.7
0.6
0.6
0.6
0.6
0.5
0.4
0.4
22
21.01
.827
0.9
0.9
0.9
0.9
0.9
0.9
0.8
0.8
0.7
0.7
0.7
0.7
0.7
0.6
0.6
0.6
0.6
0.5
0.5
0.5
0.5
0.5
0.4
0.4
0.3
18
17.19
.677
0.7
0.7
0.7
0.7
0.7
0.7
0.7
0.6
0.6
0.6
0.5
0.5
0.5
0.5
0.5
0.5
0.4
0.4
0.4
0.4
0.4
0.4
0.3
0.3
0.3
16
15.28
.602
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.5
0.5
0.5
0.5
0.5
0.4
0.4
0.4
0.4
0.4
0.4
0.4
0.4
0.3
0.3
0.3
0.3
0.2
14
13.37
.526
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.4
0.4
0.4
0.4
0.4
0.4
0.4
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.2
0.2
12
11.46
.451
0.5
0.5
0.5
0.5
0.5
0.5
0.4
0.4
0.4
0.4
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.2
0.2
0.2
0.2
0.2
10
9.55
.376
0.4
0.4
0.4
0.4
0.4
0.4
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
Number of Grooves
Pitch
mm
Diameter inches
10
20
40
60
100
200
300
400
500
rpm
600
of
700
Fastest
800
Shaft
870
[Tabulated 1000
values are 1160
1450
in Nm]
1600
1750
2000
2500
3000
3500
5000
8000
10000
I
3 mm Pitch PowerGrip HTDBelts
Belt Width (mm)

Width Multiplier
6
1.00
9
1.66
15
2.97
T-77
1095
845
219
169
1090 1100 & up
218 220 & up
1.20
1.10
555
111
840
168
1.00
10
440
88
550
110
0.90
26
24.83
.977
40.9
40.9
40.9
40.9
40.9
40.9
36.9
34.3
32.4
30.9
29.7
28.7
28.1
27.1
26.1
24.9
24.6
24.0
23.5
23.3
22.7
21.3
20.3
19.3
17.4
14.4
12.7
22
17.19
.677
33.0
33.0
33.0
33.0
33.0
33.0
29.9
27.8
26.3
25.1
24.2
23.4
22.9
22.1
21.3
20.4
20.2
19.7
19.2
19.1
18.6
17.6
16.7
15.9
14.5
12.3
11.0
24
21.01
.827
36.9
36.9
36.9
36.9
36.9
36.9
33.3
31.0
29.3
28.0
26.9
26.0
25.5
24.6
23.7
22.6
22.4
21.8
21.3
21.2
20.6
19.4
18.5
17.6
15.9
13.4
11.9
20
15.28
.602
29.3
29.3
29.3
29.3
29.3
29.3
26.5
24.7
23.4
22.4
21.6
20.9
20.4
19.8
19.1
18.2
18.0
17.6
17.2
17.1
16.6
15.7
15.0
14.3
13.1
11.2
10.1
32
32.47
1.278
53.8
53.8
53.8
53.8
53.8
53.8
48.3
44.8
42.2
40.2
38.6
37.2
36.4
35.1
33.7
32.0
31.7
30.9
30.1
29.9
29.0
27.3
25.8
24.4
21.8
17.3
14.5
36
36.29
1.429
63.1
63.1
63.1
63.1
63.1
63.1
56.5
52.3
49.2
46.8
44.9
43.3
42.3
40.7
39.1
37.1
36.7
35.7
34.8
34.5
33.5
31.4
29.7
27.9
24.7
19.0
15.3
40
42.02
1.654
73.0
73.0
73.0
73.0
73.0
73.0
65.2
60.2
56.5
53.7
51.5
49.6
48.4
46.5
44.6
42.3
41.9
40.7
39.6
39.3
38.1
35.6
33.5
31.5
27.6
20.4
44
47.75
1.880
83.5
83.5
83.5
83.5
83.5
83.5
74.4
68.5
64.3
61.0
58.3
56.1
54.8
52.6
50.4
47.7
47.2
45.8
44.6
44.2
42.8
39.9
37.5
35.1
30.4
21.5
56
59.21
2.331
113.3
113.3
113.3
113.3
113.3
113.3
100.4
92.2
86.2
81.7
78.0
74.9
73.0
70.0
66.9
63.1
62.4
60.4
58.7
58.2
56.2
51.9
48.5
44.8
37.4
64
68.75
2.707
129.5
129.5
129.5
129.5
129.5
129.5
114.8
105.3
98.5
93.3
89.1
85.5
83.4
79.9
76.3
71.9
71.1
68.9
66.8
66.2
63.9
58.8
54.6
50.1
40.6
72
76.39
3.008
145.7
145.7
145.7
145.7
145.7
145.7
129.1
118.5
110.8
104.9
100.1
96.2
93.7
89.8
85.7
80.7
79.8
77.2
74.9
74.1
71.4
65.5
60.5
55.0
43.0
48
53.48
2.105
94.5
94.5
94.5
94.5
94.5
94.5
84.0
77.2
72.3
68.5
65.5
63.0
61.4
58.9
56.4
53.2
52.7
51.1
49.7
49.2
47.6
44.2
41.5
38.6
33.1
22.3
28
28.65
1.128
45.1
45.1
45.1
45.1
45.1
45.1
40.6
37.7
35.6
33.9
32.6
31.5
30.8
29.7
28.6
27.2
27.0
26.3
25.6
25.5
24.7
23.3
22.1
21.0
18.9
15.4
13.4
15
1.89
To
350
70
435
87
0.80
18
13.37
.526
25.7
25.7
25.7
25.7
25.7
25.7
23.3
21.8
20.6
19.7
19.0
18.4
18.0
17.4
16.8
16.1
15.9
15.6
15.2
15.1
14.7
13.9
13.3
12.7
11.6
10.1
9.2
9
1.00
For Belt
Length
16
11.46
.451
22.3
22.3
22.3
22.3
22.3
22.3
20.2
18.9
17.9
17.2
16.5
16.0
15.7
15.2
14.7
14.0
13.9
13.6
13.3
13.2
12.9
12.2
11.7
11.1
10.2
8.9
8.2
Belt Width (mm)
Width Multiplier
Length (mm)
# of teeth
Length (mm)
# of teeth
14
9.55
.376
19.0
19.0
19.0
19.0
19.0
19.0
17.3
16.2
15.3
14.7
14.2
13.7
13.5
13.0
12.6
12.0
11.9
11.7
11.4
11.3
11.1
10.5
10.0
9.6
8.8
7.8
7.2
From
Number of Grooves
Pitch
mm
Diameter inches
10
20
40
60
100
200
300
400
500
600
rpm
700
of
800
Fastest
870
Shaft
1000
[Tabulated 1160
values are 1400
1450
in lbf in.]
1600
1750
1800
2000
2500
3000
3600
5000
8000
10000

25
3.38
R
T
1
11
12
13
14
15
16
13
14
15
16
T-78
To
12
440
88
550
110
0.90
1095
845
219
169
1090 1100 & up
218 220 & up
1.20
1.10
555
111
840
168
1.00
40
63.66
2.506
8.3
8.3
8.3
8.3
8.3
8.3
7.4
6.8
6.4
6.1
5.8
5.6
5.5
5.3
5.0
4.8
4.7
4.6
4.5
4.4
4.3
4.0
3.8
3.6
3.1
2.3
44
70.03
2.757
9.4
9.4
9.4
9.4
9.4
9.4
8.4
7.7
7.3
6.9
6.6
6.3
6.2
5.9
5.7
5.4
5.3
5.2
5.0
5.0
4.8
4.5
4.2
4.0
3.4
2.4
48
76.39
3.008
10.7
10.7
10.7
10.7
10.7
10.7
9.5
8.7
8.2
7.7
7.4
7.1
6.9
6.7
6.4
6.0
6.0
5.8
5.6
5.6
5.4
5.0
4.7
4.4
3.7
2.5
56
89.13
3.509
12.8
12.8
12.8
12.8
12.8
12.8
11.3
10.4
9.7
9.2
8.8
8.5
8.2
7.9
7.6
7.1
7.0
6.8
6.6
6.6
6.3
5.9
5.5
5.1
4.2
64
72
101.86 114.59
4.010 4.511
14.6
16.5
14.6
16.5
14.6
16.5
14.6
16.5
14.6
16.5
14.6
16.5
13.0
14.6
11.9
13.4
11.1
12.5
10.5
11.9
10.1
11.3
9.7
10.9
9.4
10.6
9.0
10.1
8.6
9.7
8.1
9.1
8.0
9.0
7.8
8.7
7.6
8.5
7.5
8.4
7.2
8.1
6.6
7.4
6.2
6.8
5.7
6.2
4.6
4.9
Shaded area indicates drive conditions where reduced

service life can be expected.
36
57.30
2.256
7.1
7.1
7.1
7.1
7.1
7.1
6.4
5.9
5.6
5.3
5.1
4.9
4.8
4.6
4.4
4.2
4.1
4.0
3.9
3.9
3.8
3.5
3.4
3.2
2.8
2.1
1.7
Belt Width (mm)
Width Multiplier
11
350
70
435
87
0.80
10
Length (mm)
# of teeth
Length (mm)
# of teeth
From
8
Table 38 Rated Torque (Nm) for Small Pulleys - 9 mm Belt Width
For Belt
Length
7
32
50.93
2.005
6.1
6.1
6.1
6.1
6.1
6.1
5.5
5.1
4.8
4.5
4.4
4.2
4.1
4.0
3.8
3.6
3.6
3.5
3.4
3.4
3.3
3.1
2.9
2.8
2.5
2.0
1.6
28
44.56
1.754
5.1
5.1
5.1
5.1
5.1
5.1
4.6
4.3
4.0
3.8
3.7
3.6
3.5
3.4
3.2
3.1
3.0
3.0
2.9
2.9
2.8
2.6
2.5
2.4
2.1
1.7
1.5
26
41.38
1.629
4.6
4.6
4.6
4.6
4.6
4.6
4.2
3.9
3.7
3.5
3.4
3.2
3.2
3.1
3.0
2.8
2.8
2.7
2.7
2.6
2.6
2.4
2.3
2.2
2.0
1.6
1.4
24
38.20
1.504
4.2
4.2
4.2
4.2
4.2
4.2
3.8
3.5
3.3
3.2
3.0
2.9
2.9
2.8
2.7
2.6
2.5
2.5
2.4
2.4
2.3
2.2
2.1
2.0
1.8
1.5
1.3
22
35.01
1.379
3.7
3.7
3.7
3.7
3.7
3.7
3.4
3.1
3.0
2.8
2.7
2.6
2.6
2.5
2.4
2.3
2.3
2.2
2.2
2.2
2.1
2.0
1.9
1.8
1.6
1.4
1.2
20
31.83
1.253
3.3
3.3
3.3
3.3
3.3
3.3
3.0
2.8
2.6
2.5
2.4
2.4
2.3
2.2
2.2
2.1
2.0
2.0
1.9
1.9
1.9
1.8
1.7
1.6
1.5
1.3
1.1
18
28.65
1.128
2.9
2.9
2.9
2.9
2.9
2.9
2.6
2.5
2.3
2.2
2.1
2.1
2.0
2.0
1.9
1.8
1.8
1.8
1.7
1.7
1.7
1.6
1.5
1.4
1.3
1.1
1.0
16
25.46
1.003
2.5
2.5
2.5
2.5
2.5
2.5
2.3
2.1
2.0
1.9
1.9
1.8
1.8
1.7
1.7
1.6
1.6
1.5
1.5
1.5
1.5
1.4
1.3
1.3
1.2
1.0
0.9
Number of Grooves 14
Pitch
mm 22.28
Diameter inches .877
10
2.1
20
2.1
40
2.1
60
2.1
100
2.1
200
2.1
300
2.0
400
1.8
500
1.7
600
1.7
rpm
700
1.6
of
800
1.6
Fastest
870
1.5
Shaft
1000
1.5
1.4
[Tabulated 1160
1.4
values are 1400
1450
1.3
in Nm]
1600
1.3
1750
1.3
1800
1.3
2000
1.3
2500
1.2
3000
1.1
3600
1.1
5000
1.0
8000
0.9
10000
0.8
I

9
1.00
15
1.89
25
3.38

Table 39 Rated Torque (ozf in.) for Small Pulleys - 1/8" Top Width
The following table represents the torque ratings for each belt, in its base width, at the predetermined number of grooves,
pitch diameters and rpm's. These ratings must be multiplied by the appropriate width factor to obtain the corrected torque
R
T
MXL (.080 in.) Belts

Belt Width (in.)
Width Multiplier
1/8
1.00
3/16
1.89
1/4
2.33
5/16
2.84
3/8
3.50
7/16
4.18
1/2
4.86
16
18
21
22
20
10.34 11.63 12.93 13.59 14.22
.407 .458 .509 .535 .560
7.36 8.28 9.20 9.67 10.10
7.36 8.28 9.20 9.67 10.10
7.36 8.28 9.20 9.67 10.10
7.36 8.28 9.20 9.67 10.10
7.35 8.28 9.20 9.66 10.10
7.35 8.27 9.19 9.66 10.10
7.35 8.27 9.19 9.66 10.10
7.34 8.26 9.17 9.64 10.10
7.32 8.22 9.12 9.58 10.00
7.30 8.19 9.08 9.53 9.96
7.27 8.15 9.03 9.47 9.98
No. of Grooves
Pitch
mm
Diameter
in
10
100
1000
2000
rpm
2500
of
3000
Fastest
3500
Shaft
5000
8000
10000
12000
10
6.48
.255
4.61
4.61
4.61
4.61
4.61
4.61
4.61
4.61
4.60
4.59
4.59
No. of Grooves
Pitch
mm
Diameter
in
10
100
1000
2000
rpm
2500
of
3000
Fastest
3500
Shaft
5000
8000
10000
12000
28
30
32
36
40
42
44
48
60
24
15.52 18.11 19.41 20.70 23.29 25.88 27.18 28.45 31.04 38.81
.611 .713 .764 .815 .917 1.019 1.070 1.120 1.222 1.528
11.0 12.9 13.8 14.7 16.6 18.4 19.3 20.2 22.1 27.6
11.0 12.9 13.8 14.7 16.6 18.4 19.3 20.2 22.1 27.6
11.0 12.9 13.8 14.7 16.6 18.4 19.3 20.2 22.1 27.6
11.0 12.9 13.8 14.7 16.6 18.4 19.3 20.2 22.0 27.5
11.0 12.9 13.8 14.7 16.5 18.4 19.3 20.2 22.0 27.4
11.0 12.9 13.8 14.7 16.5 18.3 19.2 20.1 21.9 27.3
11.0 12.8 13.8 14.7 16.5 18.3 19.2 20.1 21.9 27.2
11.0 12.8 13.7 14.6 16.4 18.2 19.1 19.9 21.7 26.8
10.9 12.7 13.5 14.4 16.1 17.8 18.6 19.4 21.0 25.5
10.8 12.6 13.4 14.2 15.9 17.4 18.2 18.9 20.4 24.3
10.7 12.4 13.2 14.0 15.5 17.0 17.7 18.4 19.6 22.8
11
7.11
.280
5.06
5.06
5.06
5.06
5.06
5.06
5.06
5.06
5.05
5.04
5.03
12
7.77
.306
5.53
5.53
5.53
5.53
5.53
5.53
5.53
5.53
5.52
5.51
5.49
14
9.07
.357
6.45
6.45
6.45
6.45
6.45
6.45
6.45
6.44
6.43
6.41
6.39
15
9.70
.382
6.91
6.91
6.91
6.90
6.90
6.90
6.90
6.89
6.87
6.85
6.83
3
4
5
6
7
8
9
NOTE: Tabulated values are in ozf in.
10
11
12
13
14
15
T-79
16

R
T
Table 40 Rated Torque (lbf in.) for Small Pulleys - 1/4" Top Width
The following table represents the torque ratings for each belt, in its base width, at the predetermined number of grooves,
pitch diameters and rpm's. These ratings must be multiplied by the appropriate width factor to obtain the corrected torque
XL (.200 in.) Belts
Belt Width (in.)

Width Multiplier
No. of Grooves
Pitch
mm
Diameter inches
10
100
500
1000
1160
1450
rpm
1600
of
1750
Fastest
2000
Shaft
2500
3000
3500
5000
8000
10000
10
6.48
.255
2.32
2.32
2.32
2.32
2.32
2.31
2.31
2.31
2.31
2.31
2.31
2.31
2.30
2.27
2.24
No. of Grooves
Pitch
mm
Diameter inches
10
100
500
1000
1160
1450
rpm
1600
of
1750
Fastest
2000
Shaft
2500
3000
3500
5000
8000
10000
21
24
28
30
20
22
12.93 13.59 15.52 18.11 19.41 20.70
.509 .535 .611 .713 .764 .815
4.63 4.86 5.09 5.56 6.48 6.95
4.63 4.86 5.09 5.56 6.48 6.95
4.63 4.86 5.09 5.55 6.48 6.94
4.62 4.86 5.09 5.55 6.47 6.93
4.62 4.85 5.08 5.54 6.46 6.92
4.62 4.85 5.08 5.54 6.45 6.90
4.61 4.84 5.07 5.53 6.44 6.90
4.61 4.84 5.07 5.53 6.44 6.89
4.61 4.84 5.06 5.52 6.42 6.87
4.59 4.82 5.05 5.49 6.38 6.82
4.58 4.80 5.03 5.47 6.34 6.77
4.56 4.78 5.00 5.43 6.29 6.71
4.48 4.69 4.90 5.31 6.09 6.46
4.26 4.43 4.60 4.92 5.47 5.70
4.05 4.19 4.32 4.56 4.89 4.99
3
4
5
6
7
8
9
10
11
1/4
1.00
3/8
1.59
5/16
1.29
11
7.11
.280
2.55
2.55
2.55
2.54
2.54
2.54
2.54
2.54
2.54
2.54
2.54
2.53
2.52
2.48
2.45
NOTE: Tabulated values are in lbf in.
12
13
14
15
16
T-80
7/16
1.89
12
7.77
.306
2.78
2.78
2.78
2.78
2.78
2.78
2.78
2.77
2.77
2.77
2.77
2.76
2.75
2.70
2.65
1/2
2.20
14
9.07
.357
3.24
3.24
3.24
3.24
3.24
3.24
3.24
3.23
3.23
3.23
3.22
3.22
3.19
3.11
3.04
15
9.70
.382
3.47
3.47
3.47
3.47
3.47
3.47
3.47
3.47
3.46
3.46
3.45
3.44
3.41
3.32
3.23
16
18
10.34 11.63
.407 .458
3.71 4.17
3.71 4.17
3.70 4.17
3.70 4.16
3.70 4.16
3.70 4.16
3.70 4.16
3.70 4.15
3.69 4.15
3.69 4.14
3.68 4.13
3.67 4.12
3.63 4.06
3.52 3.90
3.41 3.75
12
19.25
0.758
0.01
0.04
0.07
0.08
0.12
0.13
0.15
0.16
0.17
0.19
0.20
0.21
0.23
0.24
0.25
0.25
0.27
0.28
0.31
0.32
0.34
0.36
0.36
0.38
14
22.45
0.884
0.03
0.04
0.08
0.11
0.13
0.16
0.17
0.19
0.20
0.21
0.24
0.25
0.27
0.28
0.30
0.30
0.31
0.34
0.36
0.38
0.39
0.42
0.43
0.44
15
24.05
0.947
0.03
0.05
0.08
0.11
0.15
0.17
0.19
0.20
0.21
0.23
0.25
0.27
0.28
0.30
0.31
0.32
0.34
0.35
0.38
0.40
0.42
0.44
0.46
0.47
16
25.6
1.008
0.03
0.05
0.08
0.12
0.16
0.19
0.20
0.21
0.23
0.25
0.27
0.30
0.30
0.32
0.34
0.35
0.36
0.38
0.40
0.43
0.44
0.47
0.48
0.50
0.54
0.56
0.62
18
28.8
1.134
0.03
0.05
0.09
0.13
0.17
0.20
0.21
0.24
0.25
0.28
0.31
0.32
0.34
0.36
0.38
0.39
0.40
0.43
0.46
0.50
0.51
0.54
0.55
0.56
0.60
0.63
0.68
0.74
0.79
0.84
19
30.4
1.197
0.03
0.07
0.11
0.13
0.19
0.21
0.23
0.25
0.27
0.30
0.32
0.35
0.36
0.38
0.40
0.40
0.43
0.44
0.48
0.52
0.54
0.56
0.58
0.59
0.63
0.67
0.72
0.79
0.84
0.89
20
32
1.26
0.03
0.07
0.11
0.15
0.20
0.23
0.24
0.27
0.28
0.31
0.34
0.36
0.38
0.40
0.42
0.43
0.46
0.47
0.51
0.55
0.56
0.59
0.62
0.63
0.67
0.70
0.76
0.83
0.89
0.94
22
35.15
1.384
0.04
0.07
0.12
0.16
0.21
0.25
0.27
0.30
0.31
0.35
0.38
0.40
0.42
0.44
0.46
0.47
0.50
0.52
0.56
0.60
0.62
0.66
0.67
0.68
0.72
0.76
0.84
0.91
0.97
1.03
24
38.35
1.51
0.04
0.08
0.13
0.17
0.24
0.27
0.30
0.32
0.35
0.38
0.40
0.43
0.44
0.48
0.50
0.51
0.54
0.56
0.60
0.66
0.67
0.71
0.74
0.75
0.79
0.84
0.93
0.99
1.06
1.13
26
41.55
1.636
0.04
0.08
0.13
0.19
0.25
0.30
0.32
0.35
0.38
0.40
0.44
0.47
0.48
0.51
0.55
0.56
0.59
0.62
0.66
0.71
0.72
0.78
0.79
0.82
0.86
0.91
0.99
1.07
1.15
1.22
28
44.75
1.762
0.04
0.09
0.15
0.20
0.27
0.32
0.34
0.38
0.40
0.44
0.47
0.51
0.52
0.55
0.59
0.60
0.63
0.66
0.71
0.76
0.79
0.83
0.86
0.87
0.93
0.98
1.07
1.15
1.23
1.31
30
47.9
1.886
0.05
0.09
0.16
0.21
0.30
0.35
0.36
0.40
0.43
0.47
0.51
0.55
0.56
0.59
0.63
0.64
0.67
0.71
0.76
0.82
0.84
0.90
0.91
0.94
0.99
1.05
1.15
1.23
1.33
1.41
32
51.1
2.012
0.05
0.11
0.17
0.23
0.31
0.36
0.39
0.43
0.46
0.50
0.54
0.58
0.60
0.63
0.67
0.68
0.72
0.75
0.82
0.87
0.90
0.95
0.98
1.01
1.06
1.11
1.22
1.33
1.41
1.50
40
63.85
2.514
0.07
0.13
0.21
0.30
0.39
0.46
0.48
0.55
0.58
0.63
0.67
0.72
0.75
0.79
0.83
0.86
0.90
0.94
1.02
1.09
1.13
1.19
1.22
1.25
1.33
1.39
1.53
1.65
1.77
60
95.65
3.766
0.09
0.20
0.32
0.43
0.59
0.68
0.72
0.82
0.86
0.94
1.02
1.09
1.13
1.19
1.26
1.29
1.35
1.41
1.53
1.64
1.69
1.78
1.84
1.88
2.00
2.09
Table 41 Rated Horsepower for Small Pulleys - 10 mm Width

The following table represents the horsepower ratings for each
belt, in its base width, at the predetermined number of grooves,
pitch diameters and rpm's. These ratings must be multiplied
by the appropriate width factor to obtain the corrected torque
Belt Width (mm)
Width Multiplier
4
0.4
6
0.6
10
1.0
16
1.6
T-81
Number of Grooves
Pitch
mm
Diameter inches
100
300
500
700
1000
1200
1300
1500
1600
1800
2000
rpm
2200
of
2300
Fastest
2500
Shaft
2700
2800
[Tabulated 3000
values are 3200
in hp]
3600
4000
4200
4600
4800
5000
5500
6000
7000
8000
9000
10000
T5 mm Pitch Belts
25
2.5
R
T
1
10
11
12
13
14
15
16
10
11
12
13
14
15
16
26
82.9
3.264
0.12
0.21
0.46
0.54
0.70
0.83
0.97
1.09
1.15
1.21
1.33
1.43
1.53
1.64
1.69
1.73
1.82
1.92
2.00
2.08
2.17
2.25
2.32
2.40
2.47
2.55
2.61
2.68
2.86
3.00
27
86.1
3.39
0.12
0.21
0.48
0.56
0.72
0.86
1.01
1.13
1.19
1.26
1.37
1.49
1.60
1.70
1.74
1.80
1.89
1.98
2.08
2.16
2.25
2.33
2.41
2.49
2.57
2.64
2.72
2.79
2.96
3.12
30
95.65
3.766
0.13
0.24
0.54
0.63
0.79
0.97
1.11
1.26
1.33
1.39
1.53
1.65
1.77
1.89
1.94
2.00
2.11
2.21
2.31
2.40
2.49
2.59
2.68
2.76
2.86
2.94
3.02
3.10
3.29
3.47
40
127.5
5.018
0.19
0.32
0.71
0.83
1.06
1.27
1.49
1.68
1.77
1.86
2.04
2.20
2.36
2.52
2.59
2.67
2.80
2.95
3.08
3.20
3.34
3.46
3.58
3.69
3.81
48
152.95
6.022
0.23
0.39
0.86
0.99
1.27
1.54
1.78
2.01
2.12
2.24
2.44
2.64
2.83
3.02
3.11
3.19
3.37
3.53
3.69
3.85
3.97
50
159.3
6.272
0.23
0.40
0.89
1.05
1.33
1.60
1.85
2.09
2.21
2.32
2.55
2.75
2.95
3.14
3.23
3.33
3.51
3.67
3.85
4.01
4.17
72
229.35
9.03
0.34
0.59
1.27
1.50
1.92
2.31
2.67
3.02
3.19
3.35
3.66
3.97
4.25
4.53
4.67
Table 42 Rated Horsepower for Small Pulleys - 10 mm Width

The following table represents the horsepower ratings for each
belt, in its base width, at the predetermined number of grooves,
pitch diameters and rpm's. These ratings must be multiplied
by the appropriate width factor to obtain the corrected torque
T-82
Belt Width (mm)

Width Multiplier
4
0.4
25
79.75
3.14
0.12
0.20
0.44
0.52
0.67
0.80
0.93
1.05
1.11
1.17
1.27
1.38
1.48
1.57
1.62
1.66
1.76
1.84
1.92
2.00
2.08
2.16
2.24
2.31
2.37
2.44
2.52
2.57
2.74
2.90
24
76.55
3.014
0.11
0.20
0.43
0.50
0.64
0.76
0.89
1.01
1.06
1.11
1.22
1.33
1.42
1.52
1.56
1.60
1.69
1.77
1.85
1.93
2.00
2.08
2.15
2.21
2.28
2.35
2.41
2.48
2.63
2.78
21
67
2.638
0.09
0.17
0.38
0.44
0.56
0.67
0.78
0.89
0.93
0.98
1.07
1.15
1.23
1.31
1.35
1.39
1.48
1.54
1.61
1.69
1.76
1.81
1.88
1.94
2.00
2.05
2.12
2.17
2.31
2.43
20
63.8
2.512
0.09
0.16
0.35
0.42
0.54
0.64
0.74
0.84
0.89
0.93
1.02
1.10
1.18
1.26
1.30
1.33
1.41
1.48
1.54
1.61
1.66
1.73
1.78
1.85
1.90
1.96
2.01
2.07
2.19
2.32
18
57.45
2.262
0.08
0.15
0.32
0.38
0.48
0.58
0.67
0.75
0.79
0.83
0.91
0.99
1.05
1.13
1.17
1.19
1.26
1.33
1.38
1.45
1.50
1.56
1.61
1.66
1.72
1.76
1.81
1.86
1.97
2.08
16
51.1
2.012
0.08
0.13
0.28
0.34
0.43
0.51
0.59
0.67
0.71
0.75
0.82
0.89
0.94
1.01
1.03
1.06
1.13
1.18
1.23
1.29
1.33
1.38
1.43
1.48
1.52
1.57
1.61
1.65
1.76
1.85
15
47.9
1.886
0.07
0.12
0.27
0.31
0.40
0.48
0.56
0.63
0.67
0.70
0.76
0.83
0.89
0.94
0.97
0.99
1.05
1.10
1.15
1.21
1.25
1.30
14
44.7
1.76
0.07
0.11
0.25
0.30
0.38
0.44
0.52
0.59
0.62
0.66
0.71
0.76
0.83
0.89
0.91
0.94
0.98
1.03
1.07
1.13
1.17
1.21
Number of Grooves 12
Pitch
mm 38.35
Diameter inches
1.51
100
0.05
200
0.09
500
0.21
600
0.25
800
0.32
1000
0.39
1200
0.44
1400
0.51
1500
0.54
1600
0.56
1800
0.62
2000
0.66
rpm
2200
0.71
of
2400
0.75
Fastest
2500
0.78
Shaft
2600
0.80
0.84
[Tabulated 2800
values are 3000

3200
in hp]
3400
3600
3800
4000
4200
4400
4600
4800
5000
5500
6000
I
T10 mm Pitch Belts

6
0.6
10
1.0
16
1.6
25
2.5

Table 53 List of Tables

Table Description
Table
Page
1
Comparison of Different Tension Member Materials ...................................................................... T-12
2
Comparison of Different Belt Body Materials ................................................................................... T-14
Allowable Working Tension of Different Belt Constructions ........................................................ T-15
Basic Belt Dimensions .......................................................................................................................... T-16
T2.5 (2.5 mm) Pitch Pulley Dimensions ............................................................................................... T-18
T5 (5 mm) Pitch Pulley Dimensions ..................................................................................................... T-19
T10 (10 mm) Pitch Pulley Dimensions ................................................................................................. T-20
Minimum Pulley Diameters .................................................................................................................. T-21
Belt Tensioning Force ............................................................................................................................ T-30
10
Static Belt Tension, Tst (lbf) Per Span General Values ................................................................. T-30
11
Idler Size Recommendations ............................................................................................................... T-36
12
Recommended Tension for Length Measurement ............................................................................ T-41
13
Belt Width Tolerances ........................................................................................................................... T-41
14
Pitch Length Tolerances ........................................................................................................................ T-41
15
Center Distance Tolerances ................................................................................................................. T-42
16
Overall Belt Thickness Dimensions ................................................................................................... T-42
17
Overall Belt Thickness Tolerances ..................................................................................................... T-42
T
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
T-83
16

R
T
1
2
3
4
5
6
7
8
9
10
11
Table 53 (Cont.) List of Tables

Table
18
Table Description
Page
Pulley O.D. Tolerances .......................................................................................................................... T-43
19
Pulley Eccentricity ................................................................................................................................. T-43
20
Bore Tolerance for Pulleys ................................................................................................................... T-44
21
Pulley Pitch Accuracy ........................................................................................................................... T-44
22
ISO Axial Pulley Runout ........................................................................................................................ T-44
23
ISO Radial Pulley Runout ...................................................................................................................... T-44
24
ISO Pulley O.D. Tolerances ................................................................................................................... T-45
25
RMA Pulley Bore Tolerances ............................................................................................................... T-45
26
Nominal Flange Dimensions for Molding, Sintering, Casting, etc. ............................................... T-47
27
Additional Amount of Face Width Recommended over Nominal Belt Width ............................. T-47
28
Belt Thickness Tolerances ................................................................................................................... T-48
29
Center Distance Tolerances ................................................................................................................. T-48
30
PowerGrip Long-Length Belting Specifications ............................................................................... T-49
31
Drive Ratio Tables .................................................................................................................................. T-53
32
Center Distance Factor Tables ............................................................................................................. T-60
33
Rated Torque for Small Pulleys 2 mm Pitch GT2 Belts ................................................................. T-67
34
35
36
Rated Horsepower for Small Pulleys 5 mm Pitch GT2 Belts ....................................................... T-73
37
Rated Torque for Small Pulleys 3 mm Pitch HTD Belts ................................................................ T-75
38
Rated Torque for Small Pulleys 5 mm Pitch HTD Belts ................................................................ T-77
39
Rated Torque for Small Pulleys MXL (.080") Pitch Belts .............................................................. T-79
40
Rated Torque for Small Pulleys XL (.200") Pitch Belts .................................................................. T-80
41
Rated Horsepower for Small Pulleys T5 mm Pitch Belts ............................................................ T-81
42
Rated Horsepower for Small Pulleys T10 mm Pitch Belts .......................................................... T-82
43
List of Tables ............................................................................................................................................ T-83
44
List of Figures .......................................................................................................................................... T-85
12
13
14
15
16
T-84

Table 54 List of Figures

Figure
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
Figure Description
Page
Pulley and Belt Geometry ..................................................................................................................... T-3
Stress Pattern in Belts ........................................................................................................................... T-4
Comparison of Different Tooth Profiles .............................................................................................. T-4
Comparative Belt Pitch Selection Guide ........................................................................................... T-6
Horsepower Ratings at High Speed .................................................................................................... T-7
Horsepower Ratings at Low Speed .................................................................................................... T-7
Comparison of Performance Ratios for Various Belts ..................................................................... T-8
Comparison of Tooth Jump Torques for Various Belts .................................................................... T-8
Comparison of Noise Levels for Various Belts ................................................................................. T-9
Comparison of Positioning Errors of Various Belts .......................................................................... T-9
Double-Sided Timing Belt ..................................................................................................................... T-10
Timing Belt Stock ................................................................................................................................... T-10
Example of Timing Belt Stock Use ...................................................................................................... T-10
Belt Construction .................................................................................................................................... T-10
Belt Cross Section .................................................................................................................................. T-12
Cord Twist ................................................................................................................................................ T-13
Right-Hand Rule Applicable to S Twist .......................................................................................... T-13
S and Z Cord Lay of the Mold ....................................................................................................... T-13
Belt Tooth Configuration ........................................................................................................................ T-15
Force/Deflection Method ...................................................................................................................... T-31
Shaft Separation Method ...................................................................................................................... T-31
Single Tension Vector Force ................................................................................................................ T-31
Idler Forces .............................................................................................................................................. T-32
Sonic Tension Meter .............................................................................................................................. T-32
Angular Misalignment ........................................................................................................................... T-32
Parallel Misalignment ........................................................................................................................... T-33
Cartesian Coordinate System ............................................................................................................... T-36
Example of 5-Point Drive System ........................................................................................................ T-37
Belt Pull Vector Diagram ...................................................................................................................... T-38
Vector Sum Correction Factor .............................................................................................................. T-39
Overhung Pulley ..................................................................................................................................... T-39
Pulley Between Bearings ..................................................................................................................... T-39
Length Measuring Fixture ..................................................................................................................... T-40
Typical Pulley Groove Tolerance Band .............................................................................................. T-43
Expressions Used in Flange and Pulley Design ............................................................................... T-46
Terms Used for Timing Pulley Flange Design ................................................................................... T-47
Twin Power Belt Tolerances ................................................................................................................ T-48
Twin Power Belt Application ............................................................................................................... T-48
Belt Nomenclature ................................................................................................................................. T-52
Belt Geometry ......................................................................................................................................... T-58
GT2 Belt Selection Guide ...................................................................................................................... T-62
HTD Belt Selection Guide ..................................................................................................................... T-63
Trapezoidal Belt Selection Guide ........................................................................................................ T-64
T
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
T-85
16
1 - GEARS
Spur Gears, Precision

Hub
Hubless
Set Screw
Set Screw
Clamp
Set Screw
Clamp
Set Screw
Fairloc
Set Screw
Clamp
Set Screw
Fairloc
Set Screw
Clamp
Fairloc
Set Screw
Fairloc
Set Screw
Plain
Clamp
Fairloc
Set Screw
Fairloc
Set Screw
Plain
Clamp
Fairloc
Set Screw
Fairloc
Set Screw
Clamp
Pitch
120
120
96
96
96
80
80
80
72
72
72
72
72
72
72
64
64
64
64
64
64
64
48
48
48
48
48
48
48
48
48
48
32
32
32
32
32
32
32
32
32
32
24
24
24
24
24
24
24
24
24
16
S. Steel
Steel
Brass
Aluminum
Nylon
Acetal
Other Inch
Page No.
1-28 1
1-30
1-31
1-36
1-37
1-39
1-41
1-42
1-43
1-48
1-49
1-50
1-51
1-54
1-55
1-57
1-64
1-65
1-66
1-68
1-72
1-74
1-76
1-77
1-84
1-85
1-86
1-90
1-93
1-96
1-101
1-102
1-104
1-105
1-110
1-111
1-112
1-114
1-117
1-118
1-124
1-125
1-128
1-129
1-134
1-135
1-136
1-140
1-141
1-144
1-145
1-146
Hub
Gear
Hub
Gear
Gear
Core
Hub
Gear
Hub
Gear
Gear
Core
Hub
Gear
Hub
Gear
Core
Core
Gear
Gear
Hub
Gear
Hub
Gear
Core
Core
Gear
Gear
Hub
Gear
Hub
Gear
Core
Core
Core
Gear
Gear
Gear
T
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
1-1
16
1 - GEARS
R
T
1
Spur Gears, Commercial

Hub
Hubless
Set Screw
Plain
Set Screw
Set Screw
Plain
Plain
2
3
Plain
Plain
Set Screw
Plain
Plain
4
5
6
7
8
Plain
Plain
Set Screw
Plain
Plain
Plain
Pitch
64
64
48
48
48
48
48
48
48
48
32
32
32
32
32
32
32
32
32
32
24
24
24
24
24
24
24
16
S. Steel
Steel
Brass
Insert
Aluminum
Nylon
Acetal
Gear
Insert
Insert
Gear
Gear
Insert
Gear
Insert
Gear
Other Inch
Page No.
1-67 1
1-73
1-87
1-88
1-89
1-91
1-92
1-98
1-99
1-103
1-108
1-109
1-113
1-115
1-116
1-119
1-121
1-123
1-126
1-127
Bakelite
1-132
1-133
1-137
1-138
1-139
1-142
1-143
1-147
Spur Gears, Differential End Gears, Precision

Hub
Hubless
Clamp
Pitch
96
72
64
64
48
S. Steel
Steel
Brass
Aluminum
Nylon
Acetal
Other
Page No.
1-38
1-56
1-71
1-75
1-97
Steel
Brass
Aluminum
Nylon
Acetal
Other
Page No.
1-19
1-22
1-25
Nylon
Acetal
Other
Page No.
1-177
1-178
1-179
1-181
Spur Gears, Hardened, Precision
10
11
Hub
Hubless
Set Screw
Set Screw
Set Screw
Pitch
48
32
24
S. Steel
NOTE: Stainless Steel Set Screws for Hardened Spur Gears are on page 1-18.
Spur Gears, Cluster Gears & Hubs, Precision
12
13
Hub
Hubless
Set Screw
Set Screw
Set Screw
Set Screw
14
15
16
1-2
Pitch
80
72
64
48
S. Steel
Steel
Brass
Aluminum
1 - GEARS
Anti-Backlash Gears, Precision

Hub
Hubless
Fairloc
Set Screw
Clamp
Fairloc
Set Screw
Clamp
Set Screw
Clamp
Fairloc
Set Screw
Clamp
Fairloc
Set Screw
Clamp
Fairloc
Set Screw
Clamp
Set Screw
Clamp
Set Screw
Clamp
Module
Pitch
120
120
120
96
96
96
80
80
72
72
72
64
64
64
48
48
48
32
32
24
24
S. Steel
Steel
Brass
Aluminum
Nylon
Acetal
Other Inch
Page No.
1-148 1
1-149
1-149
1-151
1-152
1-152
1-154
1-154
1-156
1-157
1-157
1-159
1-160
1-160
1-162
1-163
1-163
1-165
1-165
1-166
1-166
T
1
2
3
4
5
Mini-Lash Gears, Precision

Hub
Hubless
Fairloc
Set Screw
Clamp
Fairloc
Set Screw
Clamp
Fairloc
Set Screw
Clamp
Fairloc
Set Screw
Clamp
Fairloc
Set Screw
Clamp
Module
Pitch
120
120
120
96
96
96
80
80
80
72
72
72
64
64
64
S. Steel
Steel
Brass
Aluminum
Nylon
Acetal
Other
Page No.
1-167
1-168
1-168
1-169
1-170
1-170
1-171
1-172
1-172
1-173
1-174
1-174
1-175
1-176
1-176
Spur Gear Stock, Commercial

Hub
Hubless
Pitch
48
32
24
20
S. Steel
Steel
Brass
Aluminum
Nylon
Acetal
Other
Page No.
1-186
1-186
1-187
1-187
Pinions, Commercial
Hub
Hubless
Pitch
64
48
32
24
S. Steel
Steel
Brass
Aluminum
Nylon
Acetal
Other
Page No.
1-14
1-15
1-16
1-17
6
7
8
9
10
11
12
13
14
15
1-3
16
1 - GEARS
Pinion Shafts, Precision

Hub
Hubless
T
1
2
Hub
Hubless
Hub
Brass
Aluminum
Nylon
Acetal
S. Steel
Steel
Brass
Aluminum
Nylon
Acetal
Other
Page No.
1-14
1-15
1-16
1-17
Pitch
64
48
44
32
24
S. Steel
Steel
Brass
Aluminum
Nylon
Acetal
Other
Page No.
1-183
1-184
1-184
1-185
1-185
Pitch
1/20th
1/10th
120
120
96
96
96
80
80
72
72
72
64
64
64
48
48
48
32
32
32
24
24
24
20
16
S. Steel
Steel
Brass
Aluminum
Nylon
Acetal
Other
Page No.
1-196
1-196
1-194
1-195
1-194
1-195
1-196
1-195
1-196
1-194
1-195
1-196
1-194
1-195
1-196
1-194
1-195
1-196
1-194
1-195
1-196
1-194
1-195
1-196
1-196
1-196
Other
Page No.
1-12 1
1-12
1-12
1-12
1-12
1-12
Pitch
64
48
32
24
Hubless
Racks, Precision
Hub
Hubless
7
8
9
10
11
12
13
14
15
16
Steel
Pinion Wire, Commerical
5
6
Inch
S. Steel
Pinion Shafts, Commercial
3
4
Pitch
120
96
80
72
64
48
1-4
1 - GEARS
Racks, Commercial
Hub
Hubless
Pitch
48
32
24
16
S. Steel
Steel
Brass
Aluminum
Nylon
Acetal
Other
Inch
Page No.
1-197 1
1-197
1-197
1-197
T
1
Racks, Round, Precision

Hub
Hubless
Pitch
120
96
72
64
48
32
24
S. Steel
Steel
Brass
Aluminum
Nylon
Acetal
Other
Page No.
1-194
1-194
1-194
1-194
1-194
1-194
1-194
Internal Gears, Precision

Hub
Hubless
Pitch
96
72
64
48
32
24
S. Steel
Steel
Brass
Aluminum
Nylon
Acetal
Other
Page No.
1-190
1-190
1-191
1-191
1-192
1-192
Hubless
Pitch
48
32
24
S. Steel
Steel
Brass
Aluminum
Nylon
Acetal
Other
Page No.
1-193
1-193
1-193
Helical Gears, Precision

Hub
Hubless
Set Screw
Pitch
48
S. Steel
Steel
Brass
Aluminum
Nylon
Acetal
Other
Page No.
1-188
Hubless
Pitch
20
S. Steel
Steel
Brass
Aluminum
Nylon
Acetal
Other
Page No.
1-189
Miter & Bevel Gears, Precision

Hub
Hubless
Set Screw
Clamp
Set Screw
Clamp
Set Screw
Clamp
Pitch
72
72
64
64
48
48
4
5
6
8
9
10
Helical Gears, Commercial

Hub
Internal Gears, Commercial

Hub
S. Steel
Steel
Brass
Aluminum
Nylon
Acetal
Other
Page No.
1-198
1-199
1-200
1-201
1-202
1-203
11
12
13
14
15
1-5
16
1 - GEARS
R
T
1
2
3
4
5
6
7
8
9
10
11
12
13
14
Miter & Bevel Gears, Commercial

Hub
Plain
Plain
Plain
Plain
Plain
Plain
Plain
Plain
Hubless
S. Steel
Steel
Brass
Aluminum
Nylon
Acetal
Other Inch
Page No.
1-204 1
1-205
1-204
1-205
1-204
1-205
1-204
1-205
Bevel Gears, Commercial

Hub
Plain
Plain
Plain
Plain
Plain
Plain
Hubless
Pitch
48
48
32
32
24
24
S. Steel
Steel
Brass
Aluminum
Nylon
Acetal
Other
Page No.
1-206
1-207
1-206
1-207
1-206
1-207
Anti-Backlash, Worm Gears, Precision

Hub
Hubless
Set Screw
Clamp
Set Screw
Clamp
S. Steel
Hub
Hub
Hub
Hub
Steel
Brass
Aluminum Nylon Acetal
Pitch
64
48
S. Steel
Steel
Brass
Pitch
64
48
S. Steel
Steel
Brass
Aluminum
Nylon
Acetal
Other
Page No.
1-208
1-210
S. Steel
Steel
Brass
Aluminum
Nylon
Acetal
Other
Bronze
Page No.
Pitch
64
64
48
48
Page No.
Other
Bronze Alloy Gear 1-209
Worm Gears, Precision

Hub
Hubless
Set Screw
Set Screw
Other
Bronze Alloy
Bronze Alloy
Page No.
1-208
1-210
Worms, Precision
Hub
Hubless
Set Screw
Set Screw
Worm Gears, Commerical

Hub
Hubless
Plain
Plain
Set Screw
Plain
Set Screw
Plain
Plain
Set Screw
Plain
Set Screw
Plain
Plain
Set Screw
Plain
Set Screw
15
16
Pitch
48
48
32
32
24
24
20
16
1-6
Pitch
48
48
48
48
48
32
32
32
32
32
24
24
24
24
24
Insert
Gear
Insert
Gear
Insert
Gear
Insert
Gear
Insert
Gear
Insert
Gear
Bronze
Bronze
1-212
1-221
1-222
1-223
1-224
1-215
1-221
1-222
1-223
1-224
1-218
1-212
1-222
1-223
1-224
1 - GEARS
Worms, Commerical
Hub
Drilled
Plain
Plain
Drilled
Plain
Plain
Drilled
Plain
Plain
Hubless
Pitch
48
48
48
32
32
32
24
24
24
S. Steel
Brass
Steel
Aluminum
Nylon
Acetal
Other Inch
Page No.
1-212 1
1-221
1-223
1-215
1-221
1-223
1-218
1-221
1-223
Blanks, Gear
Commercial Precision
Hub Type Hubless S. Steel
Steel
Set Screw
Plain
Brass Aluminum Nylon Acetal Other Page No.

Core
Blank
1-231
Insert
Blank
1-232
Blank
1-232
S. Steel
1
2
3
4
Gear Hubs, Commercial

Hub Type
Set Screw
Steel
Aluminum
Brass
Nylon
Acetal
Other
Page No.
1-228
Page No.
1-227
Page No.
1-225
1-226
1-229
1-229
1-230
Cluster Gear Hubs, Precision

Hub Type
Set Screw
S. Steel
Steel
Aluminum
Brass
Nylon
Acetal
Other
Gear & Dial Hubs, Precision

Hub Type
S. Steel
Steel
Aluminum
Brass
Nylon
Acetal
Other
Fairloc
Set Screw
Set Screw
Clamp
Clamp
Gear Clamps
S. Steel
Steel
Brass
Aluminum
Nylon
Acetal
Other
Page No.
1-244
1-246
1-245
1-247
11
Gear Clamps, Balanced-Type

S. Steel
Steel
Brass
Other
Page No.
Carbon Steel/Zinc Plated 1-234
Carbon Steel
1-235
Carbon Steel
1-237
S. Steel
12
13
Gear Clamps, Screw-Type

10
Steel
Brass
Aluminum
Nylon
Acetal
Other
Page No.
1-252
1-253
14
15
1-7
16
1 - GEARS
Gear Clamps, Split-Hub

S. Steel
Steel
Brass Aluminum Nylon Acetal
T
1
2
Other
Page No.
Inch
Carbon Steel/Zinc
0 Plated 1-238 1
1-242
1-248
1-243
1-249
Carbon Steel
1-241
Gear Clamps, Two-Piece Balanced

S. Steel
Steel
Brass
Aluminum
Nylon
Acetal
Other
1-248
1-250
1-249
1-250
3
4
Splines & Splined Bushings, Commercial

S. Steel
5
6
7
8
9
10
11
12
13
14
15
16
Page No.
1-8
Steel
Brass
Aluminum
Nylon
Acetal
Other
Carbon Steel
Page No.
1-254
INTECH POWER-CORETM GEARS GENERAL INFO.

Cast Nylon (Polyamide-12) used on Power-Core gears, reduces

the dimensional and physical property variations found on other
nonmetallic materials. Its low moisture absorption characteristics
limits its swelling or expansion to less than 0.3%. Cast Nylon 12
is generally used for precision engineered components, needing
properties such as dimensional stability, high temperature and
toughness. Gravity casting process is developed especially to
provide Nylon 12's crystallization structure.
Inch
1
Precision
Component
T
1
2
3
4
5
Selecting Nonmetallic Gear Materials

Benefits
Noise Reduction
PowerCore
Metal
Delrin
Nylon 6
Phenolic
Fiber
>6dB
>3dB
>3dB
>3dB
Shock Absorption
Some
Vibration Damping
Some
Corrosion Resistance
Some
6
7
8
Nonhygroscopic, No Swelling
Light Weight
Wear Resistance
Some
Self-Lubricating
Lubr.
Recomm.
9
10
Free of Internal Stresses

Homogeneous Crystalline Structure
Metal Core Part of Gear Blank
11
N/A
Keyway in Metal if Needed

Large Size Gear Blanks
12
High AGMA Class Achievable

Physical Properties and
Dimensions Stable in Varying
Conditions
13
NOTES: 1. The data has been determined empirically. For details on other materials, please contact the
manufacturer.

2. Delrin is a registered trademark of DuPont.
14
Stock gears using INTECH Power-Core material are shown on pages 1-101, 1-124, 1-144 and 1-146.
15
1-9
16

R
T
Power-Core gears are made by integrally casting a Polyamide 12 Nylon outer ring with a
metal knurled hub. After cooling, the gear blank is virtually stress-free and can be precision
machined to provide gear teeth.
The metal hub used on this gear reduces thermal expansion. Gear calculation for Power-Core
gears does not require backlash compensation because of swelling, due to very small moisture
absorption.
Tensile strength (lbf/in2)
Moisture absorption versus tensile strength
1
2
Inch
10.2 x 103
8.7 x 103
7.3 x 103
5.8 x 103
Cast Nylon 12
4.4 x 103
3
2.9 x 10
Nylon 6/6
Nylon 6
1.5 x 103
1.5
3
6
9
Moisture absorption (%)
With moisture absorption, tensile strength of Nylon 6 can drop
to below 20%, while for cast Nylon 12 it remains stable within
90% of its original value.
4
5
6
7
8
Dimensional changes (%)
Dimensional Change
Polyamides versus moisture
3
2
1
Nylon 6
Cast Nylon 12
Nylon 6/6
Nylon 11
2
10
Moisture content (%)
Physical Properties Table

Physical Characteristics
10
Density
0.037 lb./in.3
Coefficient of Friction
0.304 (Static)
11
Melting Point
12
13
14
15
16
Hardness
Water Absorption
358F
108 Rockwell R
0.047%
Mechanical Characteristics
Compressive Stress at 0.1% compr.
6,500 PSI
Extension Stress
8,500 PSI
Tensile Strength (ultimate)
8,400 PSI
Elasticity Modulus
2.95 x 105 PSI
Flexural Modulus
3.04 x 105 PSI
Elongation
1-10
16%
NOTE: It is important to understand that testing

procedures permit manufacturers to measure tensile
strength directly after extrusion, or in a dry state and
before submersion. Therefore, the values used in the
"Physical Properties Table" are only theoretical and
may be misleading for two reasons:
After production, most Nylons are submerged
in water to relieve internal tension.
Operating environments may present still
different and varying degrees for moisture.
This information is for reference only; to supply actual durability information, we will be glad to perform
a durability calculation for your specific application.

Knurled Metal Core Advantages Over Hexagonal and Notched Metal Core
Inch
The knurled core provides better torque transmission and even heat dissipation from the shaft
through the metal to the gear teeth. The knurled core has replaced the hexagonal and notched
metal cores in manufacturing procedures. The knurled core also allows a more uniform wall
thickness in relation to both bore and root diameter, especially in borderline cases.
As shown in Figure 1 and 2, tests performed on comparable core sizes determined that the
knurled core can withstand up to 80% higher torque than the hexagonal core.
Breakaway torque is defined as the maximum torque value at which the metal core begins to
twist out of the plastic.
T
1
2
Figure 1
Determination of Breakaway Torque

Test No:
Breakaway Torque (lbf ft.)
Axial Force (lbf)

1
Knurled Core 3.15 in.

Hexagonal Core 2.95 in.
7014
4361
8003
4316
7464
4856
Knurled Core 1.57 in.

Hexagonal Core 1.42 in.
2248
2248
2158
1349
1
2301
1431
737.5
737.5
2626
1416
2449
1593
708
443
4
5
6
7
Figure 2
Torque Required to Begin Twisting Metal Hub In Plastic
Blank Width = 20 mm
Lever Length = 100 mm
KC 3.15 in. HEX 2.95 in.
KC 1.57 in. HEX 1.42 in.
3,000
KC= Knurled core

Hex= Hex Core
2,600
10
Torque (lbf ft.)
2,200
1,850
11
1,470
1,100
12
750
370
0
Test No.
13
14
15
1-11
16
I
R
PINION SHAFTS
AGMA 10
20 PRESSURE ANGLE
Inch
MATERIAL:
T
1
303 Stainless Steel
1
Precision
Component
Available on special order:

Other lengths, teeth not listed
and passivation.
3.000 .005
1/4
10
P.D.
O.D.
D
3/16
4
5
6
7
8
9
10
11
12
INCH COMPONENT
Catalog Number
Pitch
No.
of
Teeth
P.D.
+.000
-.002
+.0000
-.0002
S1G84Z-096S10
S1G84Z-120S12
S1G85Z-072S10
S1G85Z-080S10
S1G85Z-080S12
S1G85Z-096S10
S1G85Z-096S11
S1G85Z-096S12
S1G85Z-096S14
S1G87Z-048S10
S1G87Z-064S12
S1G87Z-064S14
S1G87Z-072S14
S1G87Z-072S16
S1G87Z-080S10
S1G87Z-080S12
S1G87Z-080S14
S1G87Z-080S16
S1G87Z-080S18
S1G87Z-096S16
S1G87Z-096S18
96
120
72
80
80
96
96
96
96
48
64
64
72
72
80
80
80
80
80
96
96
10
12
10
10
12
10
11
12
14
10
12
14
14
16
10
12
14
16
18
16
18
.1042
.1000
.1389
.1250
.1500
.1042
.1146
.1250
.1458
.2083
.1875
.2188
.1944
.2222
.1250
.1500
.1750
.2000
.2250
.1667
.1875
.125
.117
.167
.150
.175
.125
.135
.146
.167
.250
.219
.250
.222
.250
.150
.175
.200
.225
.250
.188
.208
.1247
.1247
.1872
.1872
.1872
.1872
.1872
.1872
.1872
.2497
.2497
.2497
.2497
.2497
.2497
.2497
.2497
.2497
.2497
.2497
.2497
13
14
15
16
1-12
O.D.
PINION SHAFTS
AGMA 10
20 PRESSURE ANGLE
R
Inch
MATERIAL:
303 Stainless Steel
1
Precision
Component

Other lengths, teeth not listed
and passivation.
T
1
3/16 FACE
3.000 .005
10
P.D.
O.D.
SLIGHT UNDERCUT
OR .005 MAX. RAD.
4
5
INCH COMPONENT
Catalog Number
Pitch
No.
of
Teeth
P.D.
+.000
-.002
+.0000
-.0002
S1H84Z-064S16
S1H84Z-064S20
S1H84Z-072S18
S1H84Z-072S24
S1H84Z-080S20
S1H84Z-096S24
S1H84Z-096S32
S1H85Z-048S12
S1H85Z-048S18
S1H85Z-064S16
S1H85Z-064S20
S1H85Z-072S18
S1H85Z-072S24
S1H85Z-080S20
S1H87Z-024S12
S1H87Z-032S16
S1H87Z-048S12
S1H87Z-048S18
S1H87Z-064S16
S1H87Z-064S20
S1H87Z-064S24
64
64
72
72
80
96
96
48
48
64
64
72
72
80
24
32
48
48
64
64
64
16
20
18
24
20
24
32
12
18
16
20
18
24
20
12
16
12
18
16
20
24
.2500
.3125
.2500
.3333
.2500
.2500
.3333
.2500
.3750
.2500
.3125
.2500
.3333
.2500
.5000
.5000
.2500
.3750
.2500
.3125
.3750
.281
.344
.278
.361
.275
.271
.354
.292
.417
.281
.344
.278
.361
.275
.583
.563
.292
.417
.281
.344
.406
.1247
.1247
.1247
.1247
.1247
.1247
.1247
.1872
.1872
.1872
.1872
.1872
.1872
.1872
.2497
.2497
.2497
.2497
.2497
.2497
.2497
O.D.
6
7
8
9
10
11
12
13
14
15
1-13
16
PINIONS 64 PITCH & PINION SHAFTS

PINIONS 64 PITCH
R
T
HUBLESS
5/32 FACE WIDTH
20 PRESSURE ANGLE
Inch
MATERIAL:
Brass
5/32
B +.001
-.000
O.D. P.D.
3
4
5
6
7
8
INCH COMPONENT
Catalog Number
A
A
A
A
A
A
A
A
1B
1B
1B
1B
1B
1B
1B
1B
1-Y64008
1-Y64009
1-Y64010
1-Y64012
1-Y64014
1-Y64015
1-Y64016
1-Y64018
No.
of
Teeth
P.D.
O.D.
B
Bore
8
9
10
12
14
15
16
18
.125
.141
.156
.188
.219
.234
.250
.281
.156
.172
.188
.219
.250
.266
.281
.313
.064
.064
.094
.094
.094
.125
.125
.125
PINION SHAFTS
UNDERSIZED DIAMETER
MATERIAL:
303 Stainless Steel
STRAIGHTNESS:
.188
.0003 in. / in.
FINE
KNURL
10
13
14
1/64 x 45
CHAMFER
(TYP)
B
Dia.
L
Length
INCH COMPONENT
Catalog Number
A 7X 1-P0602A
A 7X 1-P0602B
A 7X 1-P0803
15
16
10
11
12
PINIONS SHOWN ABOVE

MAY BE USED WITH
THESE SHAFTS
1-14
A
Dia.
+.000
-.001
.064
.094
.125
+.0000
-.0002
.1872
.1872
.2497
.01
2.00
2.00
3.00

PINIONS 48 PITCH
HUBLESS
5/32 FACE WIDTH
20 PRESSURE ANGLE
Inch
MATERIAL:
Brass
5/32
B +.001
-.000
O.D. P.D.
INCH COMPONENT
Catalog Number
A
A
A
A
A
A
A
A
A
1B
1B
1B
1B
1B
1B
1B
1B
1B
1-Y48007
1-Y48008
1-Y48009
1-Y48010
1-Y48011
1-Y48012
1-Y48013
1-Y48014
1-Y48015
No.
of
Teeth
P.D.
O.D.
B
Bore
7
8
9
10
11
12
13
14
15
.146
.167
.188
.208
.229
.250
.271
.292
.312
.188
.208
.229
.250
.271
.292
.312
.333
.354
.064
.064
.094
.094
.094
.125
.125
.125
.125
4
5
6
7
PINION SHAFTS
UNDERSIZED DIAMETER
MATERIAL:
303 Stainless Steel
.188
STRAIGHTNESS:
FINE
KNURL
.0003 in. / in.
PINIONS SHOWN ABOVE

MAY BE USED WITH
THESE SHAFTS
10
1/64 x 45
CHAMFER
(TYP)
A 7X 1-P0602A
A 7X 1-P0602B
A 7X 1-P0803
11
12
INCH COMPONENT
Catalog Number
10
A
Dia.
+.000
-.001
.064
.094
.125
B
Dia.
+.0000
-.0002
.1872
.1872
.2497
L
Length
.01
2.00
2.00
3.00
13
14
15
1-15
16

PINIONS 32 PITCH
R
T
HUBLESS
1/4 FACE WIDTH
20 PRESSURE ANGLE
Inch
MATERIAL:
Brass
1/4
2
3
4
5
6
B +.001
-.000
O.D. P.D.
INCH COMPONENT
Catalog Number
A
A
A
A
A
A
A
1B
1B
1B
1B
1B
1B
1B
1-Y32009
1-Y32010
1-Y32011
1-Y32012
1-Y32014
1-Y32015
1-Y32016
No.
of
Teeth
P.D.
O.D.
B
Bore
9
10
11
12
14
15
16
.281
.312
.344
.375
.438
.469
.500
.344
.375
.406
.438
.500
.531
.562
.125
.125
.125
.125
.188
.188
.188
7
PINION SHAFTS
UNDERSIZED DIAMETER
MATERIAL:
303 Stainless Steel
.250
STRAIGHTNESS:
FINE
KNURL
.0003 in. / in.
10
13
14
1/64 x 45
CHAMFER
(TYP)
B
Dia.
L
Length
INCH COMPONENT
Catalog Number
A 7X 1-P1002
A 7X 1-P1203
15
16
10
11
12
PINIONS SHOWN ABOVE

MAY BE USED WITH
THESE SHAFTS
1-16
A
Dia.
+.000
-.001
.125
.188
+.0000
-.0002
.3122
.3747
.01
2.00
3.00

PINIONS 24 PITCH
HUBLESS
1/4 FACE WIDTH
20 PRESSURE ANGLE
Inch
MATERIAL:
Brass
1/4
B +.001
-.000
O.D. P.D.
INCH COMPONENT
Catalog Number
A
A
A
A
A
A
A
A
1B
1B
1B
1B
1B
1B
1B
1B
1-Y24007
1-Y24008
1-Y24009
1-Y24010
1-Y24011
1-Y24012
1-Y24014
1-Y24015
No.
of
Teeth
P.D.
O.D.
B
Bore
7
8
9
10
11
12
14
15
.292
.333
.375
.416
.458
.500
.583
.625
.375
.416
.458
.500
.542
.583
.667
.708
.125
.125
.125
.125
.188
.188
.188
.188
4
5
6
7
PINION SHAFTS
UNDERSIZED DIAMETER
MATERIAL:
303 Stainless Steel
.250
STRAIGHTNESS:
FINE
KNURL
.0003 in. / in.
PINIONS SHOWN ABOVE

MAY BE USED WITH
THESE SHAFTS
10
1/64 x 45
CHAMFER
(TYP)
A 7X 1-P1002
A 7X 1-P1203
11
12
INCH COMPONENT
Catalog Number
10
A
Dia.
+.000
-.001
.125
.188
B
Dia.
+.0000
-.0002
.3122
.3747
L
Length
.01
2.00
3.00
13
14
15
1-17
16
I
R
HARDENED SPUR GEARS 24, 32 & 48 PITCH

AGMA 10
20 PRESSURE ANGLE
Inch
T
1
2
3

Sterling Instrument Hardened Spur Gears (AGMA 10) are made of tough alloy steel heat-treated by a proprietary
diffusion coating process, which gives high surface hardness and very good corrosion resistance. The core hardness is
RC38. The surface hardness is RC55 or higher. The finish is black due to the final heat treatment and it may be omitted from
the bore. The combination of good quality, tough core and high surface hardness, make these gears a very attractive
alternative to the much more expensive hardened and ground gears. The corrosion resistant surface combined with
appropriate lube make them work in any harsh environment, under extremely heavy loads.

The gears have two tapped #8-32 UNC holes located at 90. Two cup point 18-8 stainless steel set screws are supplied with the gears. The suggested mounting configurations for higher torque are given in figures 1 and 2.
For half-dog set screw mounting (Fig. 1), the following set screws can be used:
4
INCH COMPONENT
5
6
Catalog Number
Set Screw
Set Screw
Length
Bore
S705ZY-D0832H05
S705ZY-D0832H04
S705ZY-D0832H03
5/16
1/4
3/16
1/4
3/8
1/2
7
#35 DRILL
.115
.109
8
9
Fig. 1
Half-Dog
Set Screw Mounting
(Medium Torque All Bores)
13
1/8 DRILL
LOCTITE 242 OR
EQUIVALENT
.130
.124
S7220Y-13112
SPIROL PIN
Fig. 2
Spirol Pin Mounting
(Medium and High Torque
for 1/2" Bores)
14
Predrill
15
16
Final Assembly
Predrill
11
SEE ABOVE FOR

PART NUMBER
.05 MIN.
10
12
LOCTITE 242 OR
EQUIVALENT
1-18
APPROPRIATE
DEPTH
Final Assembly
HARDENED SPUR GEARS 48 PITCH

AGMA 10
1/4 & 3/8 FACE
1/4 BORE
20 PRESSURE ANGLE
R
Inch
MATERIAL:
1
Precision
Component
Alloy Steel
Surface Hardened to Rc 55
T
1

Different number of teeth, bore size
or face width.
See technical page 1-18 for

application hints.
Fig. 1
Fig. 2
.500
.625
1/8
1/8
#8-32 UNC-2B
2 PLACES
90 APART
#8-32 UNC-2B
2 PLACES
90 APART
4
5
O.D. P.D.
.75
O.D. P.D.
.2498 +.0005
-.0000
.250
.75
.2498 +.0005
-.0000
.375
Fig. 1
Fig. 2
INCH COMPONENT
Catalog Number
Fig. 1
.250 Face
Fig. 2
.375 Face
S10A6Z-048H036
S10A6Z-048H040
S10A6Z-048H048
S10A6Z-048H050
S10A6Z-048H056
S10A6Z-048H060
S10A6Z-048H064
S10A6Z-048H072
S10A6Z-048H080
S10A6Z-048H090
S10A6Z-048H096
S10A6Z-048H100
S10A6Z-048H108
S10A6Z-048H120
S10A6Z-048H144
S10A6Z-048H156
S10A6Z-048H180
S10A6Z-048H192
S10C6Z-048H036
S10C6Z-048H040
S10C6Z-048H048
S10C6Z-048H050
S10C6Z-048H056
S10C6Z-048H060
S10C6Z-048H064
S10C6Z-048H072
S10C6Z-048H080
S10C6Z-048H090
S10C6Z-048H096
S10C6Z-048H100
S10C6Z-048H108
S10C6Z-048H120
S10C6Z-048H144
S10C6Z-048H156
S10C6Z-048H180
S10C6Z-048H192
9
No.
of
Teeth
36
40
48
50
56
60
64
72
80
90
96
100
108
120
144
156
180
192
P.D.
O.D.
.7500
.8333
1.0000
1.0417
1.1667
1.2500
1.3333
1.5000
1.6667
1.8750
2.0000
2.0833
2.2500
2.5000
3.0000
3.2500
3.7500
4.0000
.792
.875
1.042
1.083
1.208
1.292
1.375
1.542
1.708
1.917
2.042
2.125
2.292
2.542
3.042
3.292
3.792
4.042
Hob cuts into hub. Hub diameter never exceeds gear O.D.
1-19
10
11
12
13
14
15
16
I
R
T
1
2

AGMA 10
1/4 & 3/8 FACE
3/8 BORE
20 PRESSURE ANGLE
Inch
MATERIAL:
1
Precision
Component
Alloy Steel
or face width.
application hints.
Fig. 1
Fig. 2
.500
.625
1/8
#8-32 UNC-2B
2 PLACES
90 APART
1/8
#8-32 UNC-2B
2 PLACES
90 APART
.75
.75
5
O.D. P.D.
6
7
O.D. P.D.
.3748 +.0005
-.0000
.3748 +.0005
-.0000
.250
8
9
10
11
12
13
14
15
16
.375
Fig. 1
Fig. 2
INCH COMPONENT
Catalog Number
Fig. 1
.250 Face
Fig. 2
.375 Face
S10A8Z-048H036
S10A8Z-048H040
S10A8Z-048H048
S10A8Z-048H050
S10A8Z-048H056
S10A8Z-048H060
S10A8Z-048H064
S10A8Z-048H072
S10A8Z-048H080
S10A8Z-048H090
S10A8Z-048H096
S10A8Z-048H100
S10A8Z-048H108
S10A8Z-048H120
S10A8Z-048H144
S10A8Z-048H156
S10A8Z-048H168
S10A8Z-048H180
S10C8Z-048H036
S10C8Z-048H040
S10C8Z-048H048
S10C8Z-048H050
S10C8Z-048H056
S10C8Z-048H060
S10C8Z-048H064
S10C8Z-048H072
S10C8Z-048H080
S10C8Z-048H090
S10C8Z-048H096
S10C8Z-048H100
S10C8Z-048H108
S10C8Z-048H120
S10C8Z-048H144
S10C8Z-048H156
S10C8Z-048H168
S10C8Z-048H180
No.
of
Teeth
P.D.
O.D.
36
40
48
50
56
60
64
72
80
90
96
100
108
120
144
156
168
180
.7500
.8333
1.0000
1.0417
1.1667
1.2500
1.3333
1.5000
1.6667
1.8750
2.0000
2.0833
2.2500
2.5000
3.0000
3.2500
3.5000
3.7500
.792
.875
1.042
1.083
1.208
1.292
1.375
1.542
1.708
1.917
2.042
2.125
2.292
2.542
3.042
3.292
3.542
3.792
1-20

AGMA 10
1/4 & 3/8 FACE
1/2 BORE
20 PRESSURE ANGLE
R
Inch
MATERIAL:
1
Precision
Component
Alloy Steel
T
1

or face width.

application hints.
Fig. 1
Fig. 2
.500
.625
1/8
1/8
#8-32 UNC-2B
2 PLACES
90 APART
#8-32 UNC-2B
2 PLACES
90 APART
4
5
O.D. P.D.
.75
O.D. P.D.
.4998 +.0005
-.0000
.250
.75
.4998 +.0005
-.0000
.375
Fig. 1
Fig. 2
INCH COMPONENT
Catalog Number
Fig. 1
.250 Face
Fig. 2
.375 Face
S10A9Z-048H036
S10A9Z-048H040
S10A9Z-048H048
S10A9Z-048H050
S10A9Z-048H056
S10A9Z-048H060
S10A9Z-048H064
S10A9Z-048H072
S10A9Z-048H080
S10A9Z-048H090
S10A9Z-048H096
S10A9Z-048H100
S10A9Z-048H108
S10A9Z-048H120
S10A9Z-048H144
S10A9Z-048H156
S10A9Z-048H180
S10A9Z-048H192
S10C9Z-048H036
S10C9Z-048H040
S10C9Z-048H048
S10C9Z-048H050
S10C9Z-048H056
S10C9Z-048H060
S10C9Z-048H064
S10C9Z-048H072
S10C9Z-048H080
S10C9Z-048H090
S10C9Z-048H096
S10C9Z-048H100
S10C9Z-048H108
S10C9Z-048H120
S10C9Z-048H144
S10C9Z-048H156
S10C9Z-048H180
S10C9Z-048H192
9
No.
of
Teeth
P.D.
O.D.
36
40
48
50
56
60
64
72
80
90
96
100
108
120
144
156
180
192
.7500
.8333
1.0000
1.0417
1.1667
1.2500
1.3333
1.5000
1.6667
1.8750
2.0000
2.0833
2.2500
2.5000
3.0000
3.2500
3.7500
4.0000
.792
.875
1.042
1.083
1.208
1.292
1.375
1.542
1.708
1.917
2.042
2.125
2.292
2.542
3.042
3.292
3.792
4.042
1-21
10
11
12
13
14
15
16
I
R
T
1
2

AGMA 10
1/4 & 3/8 FACE
1/4 BORE
20 PRESSURE ANGLE
Inch
MATERIAL:
1
Precision
Component
Alloy Steel
or face width.
application hints.
Fig. 1
Fig. 2
3
.500
.625
1/8
#8-32 UNC-2B
2 PLACES
90 APART
1/8
#8-32 UNC-2B
2 PLACES
90 APART
.75
.75
5
6
O.D. P.D.
10
11
12
13
14
.250
.375
Fig. 1
Fig. 2
INCH COMPONENT
Catalog Number
Fig. 1
.250 Face
Fig. 2
.375 Face
S10A6Z-032H024
S10A6Z-032H028
S10A6Z-032H030
S10A6Z-032H032
S10A6Z-032H036
S10A6Z-032H040
S10A6Z-032H048
S10A6Z-032H056
S10A6Z-032H060
S10A6Z-032H064
S10A6Z-032H072
S10A6Z-032H080
S10A6Z-032H096
S10A6Z-032H112
S10A6Z-032H128
S10C6Z-032H024
S10C6Z-032H028
S10C6Z-032H030
S10C6Z-032H032
S10C6Z-032H036
S10C6Z-032H040
S10C6Z-032H048
S10C6Z-032H056
S10C6Z-032H060
S10C6Z-032H064
S10C6Z-032H072
S10C6Z-032H080
S10C6Z-032H096
S10C6Z-032H112
S10C6Z-032H128
No.
of
Teeth
24
28
30
32
36
40
48
56
60
64
72
80
96
112
128
15
16
.2498 +.0005
-.0000
.2498 +.0005
-.0000
8
9
O.D. P.D.
1-22
P.D.
O.D.
.7500
.8750
.9375
1.0000
1.1250
1.2500
1.5000
1.7500
1.8750
2.0000
2.2500
2.5000
3.0000
3.5000
4.0000
.813
.938
1.000
1.063
1.188
1.313
1.563
1.813
1.938
2.063
2.313
2.563
3.063
3.563
4.063

AGMA 10
1/4 & 3/8 FACE
3/8 BORE
20 PRESSURE ANGLE
R
Inch
MATERIAL:
1
Precision
Component
Alloy Steel
T
1

or face width.

application hints.
Fig. 1
Fig. 2
.500
.625
1/8
1/8
#8-32 UNC-2B
2 PLACES
90 APART
#8-32 UNC-2B
2 PLACES
90 APART
4
5
O.D. P.D.
.75
O.D. P.D.
.3748 +.0005
-.0000
.250
.75
.3748 +.0005
-.0000
.375
Fig. 1
Fig. 2
INCH COMPONENT
Catalog Number
Fig. 1
.250 Face
Fig. 2
.375 Face
S10A8Z-032H024
S10A8Z-032H028
S10A8Z-032H030
S10A8Z-032H032
S10A8Z-032H036
S10A8Z-032H040
S10A8Z-032H048
S10A8Z-032H056
S10A8Z-032H060
S10A8Z-032H064
S10A8Z-032H072
S10A8Z-032H080
S10A8Z-032H096
S10A8Z-032H112
S10A8Z-032H128
S10C8Z-032H024
S10C8Z-032H028
S10C8Z-032H030
S10C8Z-032H032
S10C8Z-032H036
S10C8Z-032H040
S10C8Z-032H048
S10C8Z-032H056
S10C8Z-032H060
S10C8Z-032H064
S10C8Z-032H072
S10C8Z-032H080
S10C8Z-032H096
S10C8Z-032H112
S10C8Z-032H128
9
No.
of
Teeth
24
28
30
32
36
40
48
56
60
64
72
80
96
112
128
P.D.
O.D.
.7500
.8750
.9375
1.0000
1.1250
1.2500
1.5000
1.7500
1.8750
2.0000
2.2500
2.5000
3.0000
3.5000
4.0000
.813
.938
1.000
1.063
1.188
1.313
1.563
1.813
1.938
2.063
2.313
2.563
3.063
3.563
4.063
10
11
12
13
14
15
1-23
16
I
R
T
1
2

AGMA 10
1/4 & 3/8 FACE
1/2 BORE
20 PRESSURE ANGLE
Inch
MATERIAL:
1
Precision
Component
Alloy Steel
or face width.
application hints.
Fig. 1
Fig. 2
.500
.625
1/8
1/8
#8-32 UNC-2B
2 PLACES
90 APART
#8-32 UNC-2B
2 PLACES
90 APART
4
5
O.D. P.D.
.75
.75
O.D. P.D.
.4998 +.0005
-.0000
.4998 +.0005
-.0000
.250
8
9
10
11
12
13
14
Fig. 2
INCH COMPONENT
Catalog Number
Fig. 1
.250 Face
Fig. 2
.375 Face
S10A9Z-032H024
S10A9Z-032H028
S10A9Z-032H030
S10A9Z-032H032
S10A9Z-032H036
S10A9Z-032H040
S10A9Z-032H048
S10A9Z-032H056
S10A9Z-032H060
S10A9Z-032H064
S10A9Z-032H072
S10A9Z-032H080
S10A9Z-032H096
S10A9Z-032H112
S10A9Z-032H128
S10C9Z-032H024
S10C9Z-032H028
S10C9Z-032H030
S10C9Z-032H032
S10C9Z-032H036
S10C9Z-032H040
S10C9Z-032H048
S10C9Z-032H056
S10C9Z-032H060
S10C9Z-032H064
S10C9Z-032H072
S10C9Z-032H080
S10C9Z-032H096
S10C9Z-032H112
S10C9Z-032H128
No.
of
Teeth
24
28
30
32
36
40
48
56
60
64
72
80
96
112
128
15
16
.375
Fig. 1
1-24
P.D.
O.D.
.7500
.8750
.9375
1.0000
1.1250
1.2500
1.5000
1.7500
1.8750
2.0000
2.2500
2.5000
3.0000
3.5000
4.0000
.813
.938
1.000
1.063
1.188
1.313
1.563
1.813
1.938
2.063
2.313
2.563
3.063
3.563
4.063

AGMA 10
1/4 & 3/8 FACE
1/4 BORE
20 PRESSURE ANGLE
R
Inch
MATERIAL:
1
Precision
Component
Alloy Steel

or face width.
application hints.
Fig. 2
Fig. 1
.500
.625
1/8
1/8
#8-32 UNC-2B
2 PLACES
90 APART
#8-32 UNC-2B
2 PLACES
90 APART
4
5
O.D. P.D.
.75
O.D. P.D.
.75
.2498 +.0005
-.0000
.2498 +.0005
-.0000
.250
Fig. 1
Fig. 2
INCH COMPONENT
Catalog Number
Fig. 1
.250 Face
Fig. 2
.375 Face
S10A6Z-024H018
S10A6Z-024H020
S10A6Z-024H021
S10A6Z-024H024
S10A6Z-024H030
S10A6Z-024H036
S10A6Z-024H042
S10A6Z-024H048
S10A6Z-024H054
S10A6Z-024H060
S10A6Z-024H072
S10A6Z-024H084
S10A6Z-024H096
S10C6Z-024H018
S10C6Z-024H020
S10C6Z-024H021
S10C6Z-024H024
S10C6Z-024H030
S10C6Z-024H036
S10C6Z-024H042
S10C6Z-024H048
S10C6Z-024H054
S10C6Z-024H060
S10C6Z-024H072
S10C6Z-024H084
S10C6Z-024H096
.375
9
No.
of
Teeth
18
20
21
24
30
36
42
48
54
60
72
84
96
P.D.
O.D.
.7500
.8333
.8750
1.0000
1.2500
1.5000
1.7500
2.0000
2.2500
2.5000
3.0000
3.5000
4.0000
.833
.917
.958
1.083
1.333
1.583
1.833
2.083
2.333
2.583
3.083
3.583
4.083
10
11
12
13
14
15
1-25
16
I
R
T
1
2

AGMA 10
1/4 & 3/8 FACE
3/8 BORE
20 PRESSURE ANGLE
Inch
MATERIAL:
1
Precision
Component
Alloy Steel
or face width.
application hints.
Fig. 2
Fig. 1
3
.500
.625
1/8
1/8
#8-32 UNC-2B
2 PLACES
90 APART
#8-32 UNC-2B
2 PLACES
90 APART
5
6
O.D. P.D.
.75
7
8
9
10
11
12
13
14
.75
.3748 +.0005
-.0000
.3748 +.0005
-.0000
.250
.375
Fig. 1
Fig. 2
INCH COMPONENT
Catalog Number
Fig. 1
.250 Face
Fig. 2
.375 Face
S10A8Z-024H018
S10A8Z-024H020
S10A8Z-024H021
S10A8Z-024H024
S10A8Z-024H030
S10A8Z-024H036
S10A8Z-024H042
S10A8Z-024H048
S10A8Z-024H054
S10A8Z-024H060
S10A8Z-024H072
S10A8Z-024H084
S10A8Z-024H096
S10C8Z-024H018
S10C8Z-024H020
S10C8Z-024H021
S10C8Z-024H024
S10C8Z-024H030
S10C8Z-024H036
S10C8Z-024H042
S10C8Z-024H048
S10C8Z-024H054
S10C8Z-024H060
S10C8Z-024H072
S10C8Z-024H084
S10C8Z-024H096
No.
of
Teeth
18
20
21
24
30
36
42
48
54
60
72
84
96
15
16
O.D. P.D.
1-26
P.D.
O.D.
.7500
.8333
.8750
1.0000
1.2500
1.5000
1.7500
2.0000
2.2500
2.5000
3.0000
3.5000
4.0000
.833
.917
.958
1.083
1.333
1.583
1.833
2.083
2.333
2.583
3.083
3.583
4.083

AGMA 10
1/4 & 3/8 FACE
1/2 BORE
20 PRESSURE ANGLE
R
Inch
MATERIAL:
1
Precision
Component
Alloy Steel
T
1
Available as special order:

or face width.

application hints.
Fig. 1
Fig. 2
3
.500
.625
1/8
1/8
#8-32 UNC-2B
2 PLACES
90 APART
#8-32 UNC-2B
2 PLACES
90 APART
4
5
O.D. P.D.
.75
O.D. P.D.
.75
.4998 +.0005
-.0000
.4998 +.0005
-.0000
.250
.375
Fig. 1
Fig. 2
INCH COMPONENT
Catalog Number
Fig. 1
.250 Face
Fig. 2
.375 Face
S10A9Z-024H018
S10A9Z-024H020
S10A9Z-024H021
S10A9Z-024H024
S10A9Z-024H030
S10A9Z-024H036
S10A9Z-024H042
S10A9Z-024H048
S10A9Z-024H054
S10A9Z-024H060
S10A9Z-024H072
S10A9Z-024H084
S10A9Z-024H096
S10C9Z-024H018
S10C9Z-024H020
S10C9Z-024H021
S10C9Z-024H024
S10C9Z-024H030
S10C9Z-024H036
S10C9Z-024H042
S10C9Z-024H048
S10C9Z-024H054
S10C9Z-024H060
S10C9Z-024H072
S10C9Z-024H084
S10C9Z-024H096
9
No.
of
Teeth
18
20
21
24
30
36
42
48
54
60
72
84
96
P.D.
O.D.
.7500
.8333
.8750
1.0000
1.2500
1.5000
1.7500
2.0000
2.2500
2.5000
3.0000
3.5000
4.0000
.833
.917
.958
1.083
1.333
1.583
1.833
2.083
2.333
2.583
3.083
3.583
4.083
10
11
12
13
14
15
1-27
16
I
R
T
1
2
SPUR GEARS 120 PITCH

AGMA 10
1/16 FACE
1/8 BORE
20 PRESSURE ANGLE
Inch
MATERIAL:
303 Stainless Steel

2024 Aluminum, Anodized
T4 or T351 Aluminum Alloy,
anodized before cutting
14-1/2 P.A., teeth not listed, different
bore size and/or material, passivation
for Stainless Steel.
.250
.062
3/32
SUB DRILL
#2-56 SET SCREW
O.D.
P.D.
.312
5
6
7
8
9
10
11
12
13
14
15
16
1
Precision
Component
.1248 +.0005
-.0000
INCH COMPONENT
Catalog Number
303 Stainless
Steel
2024 Aluminum
Anodized
S1023Z-120S028
S1023Z-120S032
S1023Z-120S036
S1023Z-120S040
S1023Z-120S042
S1023Z-120S044
S1023Z-120S045
S1023Z-120S048
S1023Z-120S050
S1023Z-120S054
S1023Z-120S060
S1023Z-120S065
S1023Z-120S066
S1023Z-120S070
S1023Z-120S072
S1023Z-120S075
S1023Z-120S080
S1023Z-120S084
S1023Z-120S090
S1023Z-120S095
S1023Z-120S096
S1023Z-120S100
S1023Z-120S110
S1023Z-120S120
S1023Z-120S126
S1023Z-120S132
S1023Z-120S144
S1023Z-120S150
S1023Z-120S156
S1023Z-120S162
S1023Z-120A028
S1023Z-120A032
S1023Z-120A036
S1023Z-120A040
S1023Z-120A042
S1023Z-120A044
S1023Z-120A045
S1023Z-120A048
S1023Z-120A050
S1023Z-120A054
S1023Z-120A060
S1023Z-120A065
S1023Z-120A066
S1023Z-120A070
S1023Z-120A072
S1023Z-120A075
S1023Z-120A080
S1023Z-120A084
S1023Z-120A090
S1023Z-120A095
S1023Z-120A096
S1023Z-120A100
S1023Z-120A110
S1023Z-120A120
S1023Z-120A126
S1023Z-120A132
S1023Z-120A144
S1023Z-120A150
S1023Z-120A156
S1023Z-120A162
No.
of
Teeth
P.D.
O.D.
28
32
36
40
42
44
45
48
50
54
60
65
66
70
72
75
80
84
90
95
96
100
110
120
126
132
144
150
156
162
.2333
.2667
.3000
.3333
.3500
.3667
.3750
.4000
.4167
.4500
.5000
.5417
.5500
.5833
.6000
.6250
.6667
.7000
.7500
.7917
.8000
.8333
.9167
1.0000
1.0500
1.1000
1.2000
1.2500
1.3000
1.3500
.250
.283
.317
.350
.367
.383
.392
.417
.433
.467
.517
.558
.567
.600
.617
.642
.683
.717
.767
.808
.817
.850
.933
1.017
1.067
1.117
1.217
1.267
1.317
1.367
1-28
SPUR GEARS 120 PITCH

AGMA 10
3/32 FACE
1/8 BORE
20 PRESSURE ANGLE
R
Inch
MATERIAL:
1
Precision
Component
303 Stainless Steel

T
1

.281
.093
3/32
SUB DRILL
#2-56 SET SCREW
4
O.D.
P.D.
.312
5
.1248 +.0005
-.0000
INCH COMPONENT
Catalog Number
303 Stainless
Steel
2024 Aluminum
Anodized
S1043Z-120S028
S1043Z-120S029
S1043Z-120S030
S1043Z-120S035
S1043Z-120S040
S1043Z-120S041
S1043Z-120S045
S1043Z-120S048
S1043Z-120S050
S1043Z-120S054
S1043Z-120S060
S1043Z-120S065
S1043Z-120S070
S1043Z-120S072
S1043Z-120S080
S1043Z-120S084
S1043Z-120S090
S1043Z-120S096
S1043Z-120S100
S1043Z-120S108
S1043Z-120S110
S1043Z-120S120
S1043Z-120S144
S1043Z-120S150
S1043Z-120S156
S1043Z-120S162
S1043Z-120S168
S1043Z-120S174
S1043Z-120S180
S1043Z-120S192
S1043Z-120A028
S1043Z-120A029
S1043Z-120A030
S1043Z-120A035
S1043Z-120A040
S1043Z-120A041
S1043Z-120A045
S1043Z-120A048
S1043Z-120A050
S1043Z-120A054
S1043Z-120A060
S1043Z-120A065
S1043Z-120A070
S1043Z-120A072
S1043Z-120A080
S1043Z-120A084
S1043Z-120A090
S1043Z-120A096
S1043Z-120A100
S1043Z-120A108
S1043Z-120A110
S1043Z-120A120
S1043Z-120A144
S1043Z-120A150
S1043Z-120A156
S1043Z-120A162
S1043Z-120A168
S1043Z-120A174
S1043Z-120A180
S1043Z-120A192
6
No.
of
Teeth
P.D.
O.D.
28
29
30
35
40
41
45
48
50
54
60
65
70
72
80
84
90
96
100
108
110
120
144
150
156
162
168
174
180
192
.2333
.2417
.2500
.2917
.3333
.3417
.3750
.4000
.4167
.4500
.5000
.5417
.5833
.6000
.6667
.7000
.7500
.8000
.8333
.9000
.9167
1.0000
1.2000
1.2500
1.3000
1.3500
1.4000
1.4500
1.5000
1.6000
.250
.258
.267
.308
.350
.358
.392
.417
.433
.467
.517
.558
.600
.617
.683
.717
.767
.817
.850
.917
.933
1.017
1.217
1.267
1.317
1.367
1.417
1.467
1.517
1.617
1-29
7
8
9
10
11
12
13
14
15
16
HUBLESS SPUR GEARS 120 PITCH

AGMA 10
1/8 FACE
3/8 BORE
20 PRESSURE ANGLE
R
Inch
MATERIAL:
1
Precision
Component
303 Stainless Steel

T
1

All gears over 2-1/8 Dia. supplied with lightening holes.

See Index for hubs.
Assembled upon request at nominal charge.
Hubs are available in Pin, Clamp, or Fairloc type.
B
(8 PLACES)
C
O.D.
.3750 +.0000
-.0002
P.D.
Catalog Number
303 Stainless
Steel
2024 Aluminum
Anodized
S1268Z-120S075
S1268Z-120S076
S1268Z-120S078
S1268Z-120S080
S1268Z-120S082
S1268Z-120S084
S1268Z-120S090
S1268Z-120S096
S1268Z-120S100
S1268Z-120S105
S1268Z-120S110
S1268Z-120S120
S1268Z-120S127
S1268Z-120S130
S1268Z-120S140
S1268Z-120S144
S1268Z-120S150
S1268Z-120S160
S1268Z-120S180
S1268Z-120S200
S1268Z-120S210
S1268Z-120S240
S1268Z-120S250
S1268Z-120S270
S1268Z-120S300
S1268Z-120S325
S1268Z-120S350
S1268Z-120S360
S1268Z-120S420
S1268Z-120S480
S1268Z-120A075
S1268Z-120A076
S1268Z-120A078
S1268Z-120A080
S1268Z-120A082
S1268Z-120A084
S1268Z-120A090
S1268Z-120A096
S1268Z-120A100
S1268Z-120A105
S1268Z-120A110
S1268Z-120A120
S1268Z-120A127
S1268Z-120A130
S1268Z-120A140
S1268Z-120A144
S1268Z-120A150
S1268Z-120A160
S1268Z-120A180
S1268Z-120A200
S1268Z-120A210
S1268Z-120A240
S1268Z-120A250
S1268Z-120A270
S1268Z-120A300
S1268Z-120A325
S1268Z-120A350
S1268Z-120A360
S1268Z-120A420
S1268Z-120A480
.125
INCH COMPONENT
No.
of
Teeth
P.D.
O.D.
B
Dia.
C
Dia.
75
76
78
80
82
84
90
96
100
105
110
120
127
130
140
144
150
160
180
200
210
240
250
270
300
325
350
360
420
480
.6250
.6333
.6500
.6667
.6833
.7000
.7500
.8000
.8333
.8750
.9167
1.0000
1.0583
1.0833
1.1667
1.2000
1.2500
1.3333
1.5000
1.6667
1.7500
2.0000
2.0833
2.2500
2.5000
2.7083
2.9167
3.0000
3.5000
4.0000
.642
.650
.667
.683
.700
.717
.767
.817
.850
.892
.933
1.017
1.075
1.100
1.183
1.217
1.267
1.350
1.517
1.683
1.767
2.017
2.100
2.267
2.517
2.725
2.933
3.017
3.517
4.017
.375
.375
.375
.375
.375
.500
.500
1.375
1.375
1.750
1.750
1.750
2.000
2.250
1-30
REV: 07.10.12 mh
7
8
9
10
11
12
13
14
15
16
SPUR GEARS 96 PITCH

AGMA 10
1/16 FACE
1/8 BORE
20 PRESSURE ANGLE
R
Inch
MATERIAL:
1
Precision
Component
303 Stainless Steel

T
1

2
.250
.062
3/32
SUB DRILL
#2-56 SET SCREW
4
O.D.
P.D.
.312
5
.1248 +.0005
-.0000
INCH COMPONENT
Catalog Number
303 Stainless
Steel
2024 Aluminum
Anodized
S1023Z-096S024
S1023Z-096S030
S1023Z-096S035
S1023Z-096S036
S1023Z-096S038
S1023Z-096S040
S1023Z-096S045
S1023Z-096S050
S1023Z-096S052
S1023Z-096S054
S1023Z-096S055
S1023Z-096S056
S1023Z-096S060
S1023Z-096S064
S1023Z-096S065
S1023Z-096S070
S1023Z-096S072
S1023Z-096S075
S1023Z-096S080
S1023Z-096S082
S1023Z-096S085
S1023Z-096S090
S1023Z-096S095
S1023Z-096S096
S1023Z-096S100
S1023Z-096S105
S1023Z-096S108
S1023Z-096S110
S1023Z-096S120
S1023Z-096S144
S1023Z-096A024
S1023Z-096A030
S1023Z-096A035
S1023Z-096A036
S1023Z-096A038
S1023Z-096A040
S1023Z-096A045
S1023Z-096A050
S1023Z-096A052
S1023Z-096A054
S1023Z-096A055
S1023Z-096A056
S1023Z-096A060
S1023Z-096A064
S1023Z-096A065
S1023Z-096A070
S1023Z-096A072
S1023Z-096A075
S1023Z-096A080
S1023Z-096A082
S1023Z-096A085
S1023Z-096A090
S1023Z-096A095
S1023Z-096A096
S1023Z-096A100
S1023Z-096A105
S1023Z-096A108
S1023Z-096A110
S1023Z-096A120
S1023Z-096A144
No.
of
Teeth
P.D.
O.D.
24
30
35
36
38
40
45
50
52
54
55
56
60
64
65
70
72
75
80
82
85
90
95
96
100
105
108
110
120
144
.2500
.3125
.3646
.3750
.3958
.4167
.4688
.5208
.5417
.5625
.5729
.5833
.6250
.6667
.6771
.7292
.7500
.7813
.8333
.8542
.8854
.9375
.9896
1.0000
1.0417
1.0938
1.1250
1.1458
1.2500
1.5000
.271
.333
.385
.396
.417
.438
.490
.542
.563
.583
.594
.604
.646
.688
.698
.750
.771
.802
.854
.875
.906
.958
1.010
1.021
1.063
1.115
1.146
1.167
1.271
1.521
1-31
7
8
9
10
11
12
13
14
15
16
I
R
T
1
2
SPUR GEARS 96 PITCH

AGMA 10
3/32 FACE
1/8 BORE
20 PRESSURE ANGLE
Inch
MATERIAL:
1
Precision
Component
303 Stainless Steel

.281
.093
3/32
SUB DRILL
#2-56 SET SCREW
4
O.D.
P.D.
.312
5
.1248 +.0005
-.0000
INCH COMPONENT
Catalog Number
7
8
9
10
11
12
13
14
15
16
303 Stainless
Steel
2024 Aluminum
Anodized
S1043Z-096S024
S1043Z-096S026
S1043Z-096S028
S1043Z-096S030
S1043Z-096S032
S1043Z-096S036
S1043Z-096S040
S1043Z-096S042
S1043Z-096S044
S1043Z-096S046
S1043Z-096S048
S1043Z-096S050
S1043Z-096S054
S1043Z-096S056
S1043Z-096S060
S1043Z-096S064
S1043Z-096S065
S1043Z-096S070
S1043Z-096S072
S1043Z-096S075
S1043Z-096S080
S1043Z-096S084
S1043Z-096S090
S1043Z-096S096
S1043Z-096S100
S1043Z-096S105
S1043Z-096S108
S1043Z-096S120
S1043Z-096S132
S1043Z-096S144
S1043Z-096A024
S1043Z-096A026
S1043Z-096A028
S1043Z-096A030
S1043Z-096A032
S1043Z-096A036
S1043Z-096A040
S1043Z-096A042
S1043Z-096A044
S1043Z-096A046
S1043Z-096A048
S1043Z-096A050
S1043Z-096A054
S1043Z-096A056
S1043Z-096A060
S1043Z-096A064
S1043Z-096A065
S1043Z-096A070
S1043Z-096A072
S1043Z-096A075
S1043Z-096A080
S1043Z-096A084
S1043Z-096A090
S1043Z-096A096
S1043Z-096A100
S1043Z-096A105
S1043Z-096A108
S1043Z-096A120
S1043Z-096A132
S1043Z-096A144
No.
of
Teeth
P.D.
O.D.
24
26
28
30
32
36
40
42
44
46
48
50
54
56
60
64
65
70
72
75
80
84
90
96
100
105
108
120
132
144
.2500
.2708
.2917
.3125
.3333
.3750
.4167
.4375
.4583
.4792
.5000
.5208
.5625
.5833
.6250
.6667
.6771
.7292
.7500
.7813
.8333
.8750
.9375
1.0000
1.0417
1.0938
1.1250
1.2500
1.3750
1.5000
.271
.292
.313
.333
.354
.396
.438
.458
.479
.500
.521
.542
.583
.604
.646
.688
.698
.750
.771
.802
.854
.896
.958
1.021
1.063
1.115
1.146
1.271
1.396
1.521
1-32
SPUR GEARS 96 PITCH

AGMA 10
1/8 FACE
1/8 BORE
20 PRESSURE ANGLE
R
Inch
MATERIAL:
1
Precision
Component
303 Stainless Steel

T
1

2
.312
.125
3/32
SUB DRILL
#2-56 SET SCREW
4
O.D. P.D.
.312
5
.1248 +.0005
-.0000
INCH COMPONENT
Catalog Number
303 Stainless
Steel
2024 Aluminum
Anodized
S1063Z-096S024
S1063Z-096S028
S1063Z-096S030
S1063Z-096S032
S1063Z-096S036
S1063Z-096S038
S1063Z-096S039
S1063Z-096S040
S1063Z-096S042
S1063Z-096S044
S1063Z-096S046
S1063Z-096S048
S1063Z-096S050
S1063Z-096S054
S1063Z-096S056
S1063Z-096S060
S1063Z-096S064
S1063Z-096S065
S1063Z-096S070
S1063Z-096S072
S1063Z-096S075
S1063Z-096S080
S1063Z-096S090
S1063Z-096S096
S1063Z-096S100
S1063Z-096S105
S1063Z-096S120
S1063Z-096S144
S1063Z-096S156
S1063Z-096S168
S1063Z-096A024
S1063Z-096A028
S1063Z-096A030
S1063Z-096A032
S1063Z-096A036
S1063Z-096A038
S1063Z-096A039
S1063Z-096A040
S1063Z-096A042
S1063Z-096A044
S1063Z-096A046
S1063Z-096A048
S1063Z-096A050
S1063Z-096A054
S1063Z-096A056
S1063Z-096A060
S1063Z-096A064
S1063Z-096A065
S1063Z-096A070
S1063Z-096A072
S1063Z-096A075
S1063Z-096A080
S1063Z-096A090
S1063Z-096A096
S1063Z-096A100
S1063Z-096A105
S1063Z-096A120
S1063Z-096A144
S1063Z-096A156
S1063Z-096A168
No.
of
Teeth
P.D.
O.D.
24
28
30
32
36
38
39
40
42
44
46
48
50
54
56
60
64
65
70
72
75
80
90
96
100
105
120
144
156
168
.2500
.2917
.3125
.3333
.3750
.3958
.4063
.4167
.4375
.4583
.4792
.5000
.5208
.5625
.5833
.6250
.6667
.6771
.7292
.7500
.7813
.8333
.9375
1.0000
1.0417
1.0938
1.2500
1.5000
1.6250
1.7500
.271
.313
.333
.354
.396
.417
.427
.438
.458
.479
.500
.521
.542
.583
.604
.646
.688
.698
.750
.771
.802
.854
.958
1.021
1.063
1.115
1.271
1.521
1.646
1.771
1-33
7
8
9
10
11
12
13
14
15
16
I
R
T
1
2
SPUR GEARS 96 PITCH

AGMA 10
1/8 FACE
3/16 BORE
20 PRESSURE ANGLE
Inch
MATERIAL:
1
Precision
Component
303 Stainless Steel

.343
.125
7/64
SUB DRILL
#4-40 SET SCREW
4
O.D. P.D.
.375
5
6
INCH COMPONENT
Catalog Number
7
8
9
10
11
12
13
14
15
16
.1873 +.0005
-.0000
303 Stainless
Steel
2024 Aluminum
Anodized
S1064Z-096S030
S1064Z-096S032
S1064Z-096S034
S1064Z-096S035
S1064Z-096S036
S1064Z-096S039
S1064Z-096S040
S1064Z-096S041
S1064Z-096S042
S1064Z-096S044
S1064Z-096S046
S1064Z-096S048
S1064Z-096S056
S1064Z-096S060
S1064Z-096S064
S1064Z-096S072
S1064Z-096S075
S1064Z-096S080
S1064Z-096S085
S1064Z-096S090
S1064Z-096S096
S1064Z-096S100
S1064Z-096S104
S1064Z-096S110
S1064Z-096S120
S1064Z-096S130
S1064Z-096S140
S1064Z-096S150
S1064Z-096S160
S1064Z-096S180
S1064Z-096A030
S1064Z-096A032
S1064Z-096A034
S1064Z-096A035
S1064Z-096A036
S1064Z-096A039
S1064Z-096A040
S1064Z-096A041
S1064Z-096A042
S1064Z-096A044
S1064Z-096A046
S1064Z-096A048
S1064Z-096A056
S1064Z-096A060
S1064Z-096A064
S1064Z-096A072
S1064Z-096A075
S1064Z-096A080
S1064Z-096A085
S1064Z-096A090
S1064Z-096A096
S1064Z-096A100
S1064Z-096A104
S1064Z-096A110
S1064Z-096A120
S1064Z-096A130
S1064Z-096A140
S1064Z-096A150
S1064Z-096A160
S1064Z-096A180
No.
of
Teeth
P.D.
O.D.
30
32
34
35
36
39
40
41
42
44
46
48
56
60
64
72
75
80
85
90
96
100
104
110
120
130
140
150
160
180
.3125
.3333
.3542
.3646
.3750
.4063
.4167
.4271
.4375
.4583
.4792
.5000
.5833
.6250
.6667
.7500
.7813
.8333
.8854
.9375
1.0000
1.0417
1.0833
1.1458
1.2500
1.3542
1.4583
1.5625
1.6667
1.8750
.333
.354
.375
.385
.396
.427
.438
.448
.458
.479
.500
.521
.604
.646
.688
.771
.802
.854
.906
.958
1.021
1.063
1.104
1.167
1.271
1.375
1.479
1.583
1.688
1.896
1-34
SPUR GEARS 96 PITCH

AGMA 10
1/8 FACE
1/4 BORE
20 PRESSURE ANGLE
R
Inch
MATERIAL:
1
Precision
Component
303 Stainless Steel

T
1

2
.375
.125
1/8
SUB DRILL
#6-32 SET SCREW
4
O.D.
P.D.
.500
5
.2498 +.0005
-.0000
INCH COMPONENT
Catalog Number
303 Stainless
Steel
2024 Aluminum
Anodized
S1066Z-096S052
S1066Z-096S054
S1066Z-096S056
S1066Z-096S060
S1066Z-096S063
S1066Z-096S072
S1066Z-096S076
S1066Z-096S078
S1066Z-096S080
S1066Z-096S084
S1066Z-096S090
S1066Z-096S092
S1066Z-096S096
S1066Z-096S100
S1066Z-096S108
S1066Z-096S110
S1066Z-096S112
S1066Z-096S120
S1066Z-096S125
S1066Z-096S126
S1066Z-096S130
S1066Z-096S132
S1066Z-096S140
S1066Z-096S149
S1066Z-096S150
S1066Z-096S163
S1066Z-096S170
S1066Z-096S180
S1066Z-096S190
S1066Z-096S220
S1066Z-096A052
S1066Z-096A054
S1066Z-096A056
S1066Z-096A060
S1066Z-096A063
S1066Z-096A072
S1066Z-096A076
S1066Z-096A078
S1066Z-096A080
S1066Z-096A084
S1066Z-096A090
S1066Z-096A092
S1066Z-096A096
S1066Z-096A100
S1066Z-096A108
S1066Z-096A110
S1066Z-096A112
S1066Z-096A120
S1066Z-096A125
S1066Z-096A126
S1066Z-096A130
S1066Z-096A132
S1066Z-096A140
S1066Z-096A149
S1066Z-096A150
S1066Z-096A163
S1066Z-096A170
S1066Z-096A180
S1066Z-096A190
S1066Z-096A220
No.
of
Teeth
P.D.
O.D.
52
54
56
60
63
72
76
78
80
84
90
92
96
100
108
110
112
120
125
126
130
132
140
149
150
163
170
180
190
220
.5417
.5625
.5833
.6250
.6563
.7500
.7917
.8125
.8333
.8750
.9375
.9583
1.0000
1.0417
1.1250
1.1458
1.1667
1.2500
1.3020
1.3125
1.3542
1.3750
1.4583
1.5521
1.5625
1.6979
1.7708
1.8750
1.9792
2.2917
.563
.583
.604
.646
.677
.771
.813
.833
.854
.896
.958
.979
1.021
1.063
1.146
1.167
1.188
1.271
1.323
1.333
1.375
1.396
1.479
1.573
1.583
1.719
1.792
1.896
2.000
2.313
1-35
7
8
9
10
11
12
13
14
15
16
I
R
T
1
2
CLAMP TYPE SPUR GEARS 96 PITCH

AGMA 10
1/8 FACE
1/8 BORE
20 PRESSURE ANGLE
Inch
MATERIAL:
1
Precision
Component
303 Stainless Steel

.406
.125
.250
.1248 +.0005
-.0000
.188 +.000
-.003
O.D.
P.D.
1/4
5
FOR CLAMPS
SEE INDEX
INCH COMPONENT
Catalog Number
7
8
9
10
11
12
13
14
15
16
303 Stainless
Steel
2024 Aluminum
Anodized
S1163Z-096S024
S1163Z-096S028
S1163Z-096S030
S1163Z-096S032
S1163Z-096S034
S1163Z-096S036
S1163Z-096S038
S1163Z-096S040
S1163Z-096S042
S1163Z-096S044
S1163Z-096S046
S1163Z-096S048
S1163Z-096S050
S1163Z-096S054
S1163Z-096S056
S1163Z-096S060
S1163Z-096S064
S1163Z-096S070
S1163Z-096S072
S1163Z-096S076
S1163Z-096S080
S1163Z-096S084
S1163Z-096S090
S1163Z-096S096
S1163Z-096S100
S1163Z-096S120
S1163Z-096S144
S1163Z-096S156
S1163Z-096S168
S1163Z-096S180
S1163Z-096A024
S1163Z-096A028
S1163Z-096A030
S1163Z-096A032
S1163Z-096A034
S1163Z-096A036
S1163Z-096A038
S1163Z-096A040
S1163Z-096A042
S1163Z-096A044
S1163Z-096A046
S1163Z-096A048
S1163Z-096A050
S1163Z-096A054
S1163Z-096A056
S1163Z-096A060
S1163Z-096A064
S1163Z-096A070
S1163Z-096A072
S1163Z-096A076
S1163Z-096A080
S1163Z-096A084
S1163Z-096A090
S1163Z-096A096
S1163Z-096A100
S1163Z-096A120
S1163Z-096A144
S1163Z-096A156
S1163Z-096A168
S1163Z-096A180
1-36
No.
of
Teeth
P.D.
O.D.
24
28
30
32
34
36
38
40
42
44
46
48
50
54
56
60
64
70
72
76
80
84
90
96
100
120
144
156
168
180
.2500
.2917
.3125
.3333
.3542
.3750
.3958
.4167
.4375
.4583
.4792
.5000
.5208
.5625
.5833
.6250
.6667
.7292
.7500
.7917
.8333
.8750
.9375
1.0000
1.0417
1.2500
1.5000
1.6250
1.7500
1.8750
.271
.313
.333
.354
.375
.396
.417
.438
.458
.479
.500
.521
.542
.583
.604
.646
.688
.750
.771
.813
.854
.896
.958
1.021
1.063
1.271
1.521
1.646
1.771
1.896

AGMA 10
1/8 FACE
3/8 BORE
20 PRESSURE ANGLE
R
Inch
MATERIAL:
1
Precision
Component
303 Stainless Steel

T
1


See Index for hubs.
B
(8 PLACES)
C
O.D.
.3750 +.0000
-.0002
P.D.
Catalog Number
303 Stainless
Steel
2024 Aluminum
Anodized
S1268Z-096S058
S1268Z-096S062
S1268Z-096S064
S1268Z-096S066
S1268Z-096S072
S1268Z-096S084
S1268Z-096S096
S1268Z-096S100
S1268Z-096S110
S1268Z-096S120
S1268Z-096S127
S1268Z-096S130
S1268Z-096S132
S1268Z-096S140
S1268Z-096S144
S1268Z-096S150
S1268Z-096S160
S1268Z-096S170
S1268Z-096S180
S1268Z-096S190
S1268Z-096S200
S1268Z-096S220
S1268Z-096S228
S1268Z-096S240
S1268Z-096S250
S1268Z-096S260
S1268Z-096S280
S1268Z-096S288
S1268Z-096S336
S1268Z-096S384
S1268Z-096A058
S1268Z-096A062
S1268Z-096A064
S1268Z-096A066
S1268Z-096A072
S1268Z-096A084
S1268Z-096A096
S1268Z-096A100
S1268Z-096A110
S1268Z-096A120
S1268Z-096A127
S1268Z-096A130
S1268Z-096A132
S1268Z-096A140
S1268Z-096A144
S1268Z-096A150
S1268Z-096A160
S1268Z-096A170
S1268Z-096A180
S1268Z-096A190
S1268Z-096A200
S1268Z-096A220
S1268Z-096A228
S1268Z-096A240
S1268Z-096A250
S1268Z-096A260
S1268Z-096A280
S1268Z-096A288
S1268Z-096A336
S1268Z-096A384
.125
INCH COMPONENT
No.
of
Teeth
P.D.
O.D.
B
Dia.
C
Dia.
58
62
64
66
72
84
96
100
110
120
127
130
132
140
144
150
160
170
180
190
200
220
228
240
250
260
280
288
336
384
.6042
.6458
.6667
.6875
.7500
.8750
1.0000
1.0417
1.1458
1.2500
1.3229
1.3542
1.3750
1.4583
1.5000
1.5625
1.6667
1.7708
1.8750
1.9792
2.0833
2.2917
2.3750
2.5000
2.6042
2.7083
2.9167
3.0000
3.5000
4.0000
.625
.667
.688
.708
.771
.896
1.021
1.063
1.167
1.271
1.344
1.375
1.396
1.479
1.521
1.583
1.688
1.792
1.896
2.000
2.104
2.313
2.396
2.521
2.625
2.729
2.938
3.021
3.521
4.021
.375
.375
.375
.375
.375
.375
.375
.500
.500
1.375
1.375
1.375
1.375
1.750
1.750
1.750
2.000
2.250
1-37
REV: 07.10.12 mh
7
8
9
10
11
12
13
14
15
16
I
R
DIFFERENTIAL END GEARS 96 PITCH

AGMA 12
20 PRESSURE ANGLE
MATERIAL:
T
1
2
Inch
303 Stainless Steel

2024 Aluminum, Anodized before hobbing
1
Precision
Component
The end gears shown on this page will

be assembled to differentials which are
ordered at the same time, free of charge.
.078
.093
3
4
O.D.
.3116 +.0003
-.0000
P.D.
O.D.
.4998 +.0003
-.0000
P.D.
5
6
7
8
9
10
Fig. 1
Catalog Number
303 Stainless
Steel
2024 Aluminum
Anodized
Fig. 1 5/64 Face .3116 Bore

S1239Z-096S090C
S1239Z-096A090C
S1239Z-096S100C
S1239Z-096A100C
S1239Z-096S110C
S1239Z-096A110C
S1239Z-096S150C
S1239Z-096A150C
S1249Z-096S100C
S1249Z-096A100C
S1249Z-096S120C
S1249Z-096A120C
S1249Z-096S130C
S1249Z-096A130C
S1249Z-096S150C
S1249Z-096A150C
11
12
13
14
15
16
Fig. 2
INCH COMPONENT
1-38
No.
of
Teeth
P.D.
O.D.
90
100
110
150
.9375
1.0417
1.1458
1.5625
.9583
1.0625
1.1667
1.5833
100
120
130
150
1.0417
1.2500
1.3542
1.5625
1.0625
1.2708
1.3750
1.5833
SPUR GEARS 80 PITCH

AGMA 10
1/8 FACE
1/8 BORE
20 PRESSURE ANGLE
R
Inch
MATERIAL:
1
Precision
Component
303 Stainless Steel

T
1

2
.312
.125
3/32
SUB DRILL
#2-56 SET SCREW
4
O.D. P.D.
.312
5
.1248 +.0005
-.0000
INCH COMPONENT
Catalog Number
303 Stainless
Steel
2024 Aluminum
Anodized
S1063Z-080S025
S1063Z-080S026
S1063Z-080S027
S1063Z-080S028
S1063Z-080S029
S1063Z-080S030
S1063Z-080S031
S1063Z-080S032
S1063Z-080S034
S1063Z-080S036
S1063Z-080S038
S1063Z-080S040
S1063Z-080S042
S1063Z-080S044
S1063Z-080S050
S1063Z-080S055
S1063Z-080S060
S1063Z-080S065
S1063Z-080S075
S1063Z-080S080
S1063Z-080S085
S1063Z-080S090
S1063Z-080S100
S1063Z-080S110
S1063Z-080S120
S1063Z-080S130
S1063Z-080S140
S1063Z-080S150
S1063Z-080S160
S1063Z-080S170
S1063Z-080A025
S1063Z-080A026
S1063Z-080A027
S1063Z-080A028
S1063Z-080A029
S1063Z-080A030
S1063Z-080A031
S1063Z-080A032
S1063Z-080A034
S1063Z-080A036
S1063Z-080A038
S1063Z-080A040
S1063Z-080A042
S1063Z-080A044
S1063Z-080A050
S1063Z-080A055
S1063Z-080A060
S1063Z-080A065
S1063Z-080A075
S1063Z-080A080
S1063Z-080A085
S1063Z-080A090
S1063Z-080A100
S1063Z-080A110
S1063Z-080A120
S1063Z-080A130
S1063Z-080A140
S1063Z-080A150
S1063Z-080A160
S1063Z-080A170
No.
of
Teeth
P.D.
O.D.
25
26
27
28
29
30
31
32
34
36
38
40
42
44
50
55
60
65
75
80
85
90
100
110
120
130
140
150
160
170
.3125
.3250
.3375
.3500
.3625
.3750
.3875
.4000
.4250
.4500
.4750
.5000
.5250
.5500
.6250
.6875
.7500
.8125
.9375
1.0000
1.0625
1.1250
1.2500
1.3750
1.5000
1.6250
1.7500
1.8750
2.0000
2.1250
.338
.350
.363
.375
.388
.400
.413
.425
.450
.475
.500
.525
.550
.575
.650
.713
.775
.838
.963
1.025
1.088
1.150
1.275
1.400
1.525
1.650
1.775
1.900
2.025
2.150
1-39
7
8
9
10
11
12
13
14
15
16
I
R
T
1
2
SPUR GEARS 80 PITCH

AGMA 10
1/8 FACE
3/16 BORE
20 PRESSURE ANGLE
Inch
MATERIAL:
1
Precision
Component
303 Stainless Steel

.343
.125
7/64
SUB DRILL
#4-40 SET SCREW
4
O.D. P.D.
.375
5
6
INCH COMPONENT
Catalog Number
7
8
9
10
11
12
13
14
15
16
.1873 +.0005
-.0000
303 Stainless
Steel
2024 Aluminum
Anodized
S1064Z-080S025
S1064Z-080S026
S1064Z-080S027
S1064Z-080S028
S1064Z-080S030
S1064Z-080S032
S1064Z-080S036
S1064Z-080S040
S1064Z-080S045
S1064Z-080S050
S1064Z-080S055
S1064Z-080S060
S1064Z-080S065
S1064Z-080S070
S1064Z-080S075
S1064Z-080S080
S1064Z-080S085
S1064Z-080S090
S1064Z-080S100
S1064Z-080S110
S1064Z-080S120
S1064Z-080S130
S1064Z-080S140
S1064Z-080S150
S1064Z-080S160
S1064Z-080S180
S1064Z-080S200
S1064Z-080S220
S1064Z-080S240
S1064Z-080S250
S1064Z-080A025
S1064Z-080A026
S1064Z-080A027
S1064Z-080A028
S1064Z-080A030
S1064Z-080A032
S1064Z-080A036
S1064Z-080A040
S1064Z-080A045
S1064Z-080A050
S1064Z-080A055
S1064Z-080A060
S1064Z-080A065
S1064Z-080A070
S1064Z-080A075
S1064Z-080A080
S1064Z-080A085
S1064Z-080A090
S1064Z-080A100
S1064Z-080A110
S1064Z-080A120
S1064Z-080A130
S1064Z-080A140
S1064Z-080A150
S1064Z-080A160
S1064Z-080A180
S1064Z-080A200
S1064Z-080A220
S1064Z-080A240
S1064Z-080A250
No.
of
Teeth
P.D.
O.D.
25
26
27
28
30
32
36
40
45
50
55
60
65
70
75
80
85
90
100
110
120
130
140
150
160
180
200
220
240
250
.3125
.3250
.3375
.3500
.3750
.4000
.4500
.5000
.5625
.6250
.6875
.7500
.8125
.8750
.9375
1.0000
1.0625
1.1250
1.2500
1.3750
1.5000
1.6250
1.7500
1.8750
2.0000
2.2500
2.5000
2.7500
3.0000
3.1250
.338
.350
.363
.375
.400
.425
.475
.525
.588
.650
.713
.775
.838
.900
.963
1.025
1.088
1.150
1.275
1.400
1.525
1.650
1.775
1.900
2.025
2.275
2.525
2.775
3.025
3.150
1-40

AGMA 10
1/8 FACE
3/16 BORE
20 PRESSURE ANGLE
R
Inch
MATERIAL:
1
Precision
Component
303 Stainless Steel

T
1

.406
.125
.250
.1873 +.0005
-.0000
.250 +.000
-.003
O.D.
P.D.
5/16
5
FOR CLAMPS
SEE INDEX
INCH COMPONENT
Catalog Number
303 Stainless
Steel
2024 Aluminum
Anodized
S1164Z-080S025
S1164Z-080S026
S1164Z-080S027
S1164Z-080S028
S1164Z-080S030
S1164Z-080S032
S1164Z-080S036
S1164Z-080S038
S1164Z-080S040
S1164Z-080S042
S1164Z-080S044
S1164Z-080S045
S1164Z-080S048
S1164Z-080S050
S1164Z-080S055
S1164Z-080S060
S1164Z-080S064
S1164Z-080S065
S1164Z-080S070
S1164Z-080S072
S1164Z-080S075
S1164Z-080S080
S1164Z-080S085
S1164Z-080S090
S1164Z-080S100
S1164Z-080S110
S1164Z-080S120
S1164Z-080S130
S1164Z-080S140
S1164Z-080S150
S1164Z-080A025
S1164Z-080A026
S1164Z-080A027
S1164Z-080A028
S1164Z-080A030
S1164Z-080A032
S1164Z-080A036
S1164Z-080A038
S1164Z-080A040
S1164Z-080A042
S1164Z-080A044
S1164Z-080A045
S1164Z-080A048
S1164Z-080A050
S1164Z-080A055
S1164Z-080A060
S1164Z-080A064
S1164Z-080A065
S1164Z-080A070
S1164Z-080A072
S1164Z-080A075
S1164Z-080A080
S1164Z-080A085
S1164Z-080A090
S1164Z-080A100
S1164Z-080A110
S1164Z-080A120
S1164Z-080A130
S1164Z-080A140
S1164Z-080A150
No.
of
Teeth
P.D.
O.D.
25
26
27
28
30
32
36
38
40
42
44
45
48
50
55
60
64
65
70
72
75
80
85
90
100
110
120
130
140
150
.3125
.3250
.3375
.3500
.3750
.4000
.4500
.4750
.5000
.5250
.5500
.5625
.6000
.6250
.6875
.7500
.8000
.8125
.8750
.9000
.9375
1.0000
1.0625
1.1250
1.2500
1.3750
1.5000
1.6250
1.7500
1.8750
.338
.350
.363
.375
.400
.425
.475
.500
.525
.550
.575
.588
.625
.650
.713
.775
.825
.838
.900
.925
.963
1.025
1.088
1.150
1.275
1.400
1.525
1.650
1.775
1.900
1-41
7
8
9
10
11
12
13
14
15
16

AGMA 10
1/8 FACE
3/8 BORE
20 PRESSURE ANGLE
R
Inch
MATERIAL:
303 Stainless Steel

Anodized before cutting
1
Precision
Component
T
1


See Index for hubs.
B
(8 PLACES)
C
O.D.
.3750 +.0000
-.0002
P.D.
Catalog Number
303 Stainless
Steel
2024 Aluminum
Anodized
S1268Z-080S048
S1268Z-080S050
S1268Z-080S052
S1268Z-080S054
S1268Z-080S056
S1268Z-080S058
S1268Z-080S060
S1268Z-080S062
S1268Z-080S070
S1268Z-080S080
S1268Z-080S090
S1268Z-080S100
S1268Z-080S110
S1268Z-080S120
S1268Z-080S127
S1268Z-080S130
S1268Z-080S140
S1268Z-080S150
S1268Z-080S160
S1268Z-080S170
S1268Z-080S180
S1268Z-080S190
S1268Z-080S200
S1268Z-080S210
S1268Z-080S220
S1268Z-080S240
S1268Z-080S260
S1268Z-080S280
S1268Z-080S300
S1268Z-080S320
S1268Z-080A048
S1268Z-080A050
S1268Z-080A052
S1268Z-080A054
S1268Z-080A056
S1268Z-080A058
S1268Z-080A060
S1268Z-080A062
S1268Z-080A070
S1268Z-080A080
S1268Z-080A090
S1268Z-080A100
S1268Z-080A110
S1268Z-080A120
S1268Z-080A127
S1268Z-080A130
S1268Z-080A140
S1268Z-080A150
S1268Z-080A160
S1268Z-080A170
S1268Z-080A180
S1268Z-080A190
S1268Z-080A200
S1268Z-080A210
S1268Z-080A220
S1268Z-080A240
S1268Z-080A260
S1268Z-080A280
S1268Z-080A300
S1268Z-080A320
.125
INCH COMPONENT
No.
of
Teeth
P.D.
O.D.
B
Dia.
C
Dia.
48
50
52
54
56
58
60
62
70
80
90
100
110
120
127
130
140
150
160
170
180
190
200
210
220
240
260
280
300
320
.6000
.6250
.6500
.6750
.7000
.7250
.7500
.7750
.8750
1.0000
1.1250
1.2500
1.3750
1.5000
1.5875
1.6250
1.7500
1.8750
2.0000
2.1250
2.2500
2.3750
2.5000
2.6250
2.7500
3.0000
3.2500
3.5000
3.7500
4.0000
.625
.650
.675
.700
.725
.750
.775
.800
.900
1.025
1.150
1.275
1.400
1.525
1.613
1.650
1.775
1.900
2.025
2.150
2.275
2.400
2.525
2.650
2.775
3.025
3.275
3.525
3.775
4.025
.375
.375
.375
.375
.375
.375
.375
.500
.500
.500
.500
1.375
1.375
1.375
1.375
1.750
1.750
1.750
2.000
2.000
2.250
2.250
1-42
REV: 07.11.12 mh
7
8
9
10
11
12
13
14
15
16
SPUR GEARS 72 PITCH

AGMA 10
1/8 FACE
1/8 BORE
20 PRESSURE ANGLE
R
Inch
MATERIAL:
1
Precision
Component
303 Stainless Steel


.312
.125
3/32
SUB DRILL
#2-56 SET SCREW
O.D. P.D.
.312
.1248 +.0005
-.0000
INCH COMPONENT
Catalog Number
303 Stainless
Steel
2024 Aluminum
Anodized
S1063Z-072S020
S1063Z-072S022
S1063Z-072S024
S1063Z-072S026
S1063Z-072S028
S1063Z-072S030
S1063Z-072S032
S1063Z-072S034
S1063Z-072S036
S1063Z-072S038
S1063Z-072S040
S1063Z-072S044
S1063Z-072S045
S1063Z-072S046
S1063Z-072S048
S1063Z-072S050
S1063Z-072S056
S1063Z-072S060
S1063Z-072S064
S1063Z-072S070
S1063Z-072S072
S1063Z-072S075
S1063Z-072S080
S1063Z-072S090
S1063Z-072S096
S1063Z-072S100
S1063Z-072S110
S1063Z-072S120
S1063Z-072S130
S1063Z-072S150
S1063Z-072A020
S1063Z-072A022
S1063Z-072A024
S1063Z-072A026
S1063Z-072A028
S1063Z-072A030
S1063Z-072A032
S1063Z-072A034
S1063Z-072A036
S1063Z-072A038
S1063Z-072A040
S1063Z-072A044
S1063Z-072A045
S1063Z-072A046
S1063Z-072A048
S1063Z-072A050
S1063Z-072A056
S1063Z-072A060
S1063Z-072A064
S1063Z-072A070
S1063Z-072A072
S1063Z-072A075
S1063Z-072A080
S1063Z-072A090
S1063Z-072A096
S1063Z-072A100
S1063Z-072A110
S1063Z-072A120
S1063Z-072A130
S1063Z-072A150
6
No.
of
Teeth
P.D.
O.D.
20
22
24
26
28
30
32
34
36
38
40
44
45
46
48
50
56
60
64
70
72
75
80
90
96
100
110
120
130
150
.2778
.3056
.3333
.3611
.3889
.4167
.4444
.4722
.5000
.5278
.5556
.6111
.6250
.6389
.6667
.6944
.7778
.8333
.8889
.9722
1.0000
1.0417
1.1111
1.2500
1.3333
1.3889
1.5278
1.6667
1.8056
2.0833
.306
.333
.361
.389
.417
.444
.472
.500
.528
.556
.583
.639
.653
.667
.694
.722
.806
.861
.917
1.000
1.028
1.069
1.139
1.278
1.361
1.417
1.556
1.694
1.833
2.111
1-43
7
8
9
10
11
12
13
14
15
16
I
R
T
1
2
SPUR GEARS 72 PITCH

AGMA 10
1/8 FACE
3/16 BORE
20 PRESSURE ANGLE
Inch
MATERIAL:
1
Precision
Component
303 Stainless Steel

.343
.125
7/64
SUB DRILL
#4-40 SET SCREW
4
O.D. P.D.
.375
5
6
Catalog Number
7
8
9
10
11
12
13
14
15
16
.1873 +.0005
-.0000
INCH COMPONENT
303 Stainless
Steel
2024 Aluminum
Anodized
S1064Z-072S028
S1064Z-072S030
S1064Z-072S032
S1064Z-072S036
S1064Z-072S040
S1064Z-072S044
S1064Z-072S045
S1064Z-072S046
S1064Z-072S048
S1064Z-072S050
S1064Z-072S054
S1064Z-072S060
S1064Z-072S070
S1064Z-072S072
S1064Z-072S075
S1064Z-072S080
S1064Z-072S085
S1064Z-072S090
S1064Z-072S096
S1064Z-072S100
S1064Z-072S110
S1064Z-072S120
S1064Z-072S126
S1064Z-072S140
S1064Z-072S144
S1064Z-072S150
S1064Z-072S162
S1064Z-072S180
S1064Z-072S198
S1064Z-072S216
S1064Z-072A028
S1064Z-072A030
S1064Z-072A032
S1064Z-072A036
S1064Z-072A040
S1064Z-072A044
S1064Z-072A045
S1064Z-072A046
S1064Z-072A048
S1064Z-072A050
S1064Z-072A054
S1064Z-072A060
S1064Z-072A070
S1064Z-072A072
S1064Z-072A075
S1064Z-072A080
S1064Z-072A085
S1064Z-072A090
S1064Z-072A096
S1064Z-072A100
S1064Z-072A110
S1064Z-072A120
S1064Z-072A126
S1064Z-072A140
S1064Z-072A144
S1064Z-072A150
S1064Z-072A162
S1064Z-072A180
S1064Z-072A198
S1064Z-072A216
No.
of
Teeth
P.D.
O.D.
28
30
32
36
40
44
45
46
48
50
54
60
70
72
75
80
85
90
96
100
110
120
126
140
144
150
162
180
198
216
.3889
.4167
.4444
.5000
.5556
.6111
.6250
.6389
.6667
.6944
.7500
.8333
.9722
1.0000
1.0417
1.1111
1.1806
1.2500
1.3333
1.3889
1.5278
1.6667
1.7500
1.9444
2.0000
2.0833
2.2500
2.5000
2.7500
3.0000
.417
.444
.472
.528
.583
.639
.653
.667
.694
.722
.778
.861
1.000
1.028
1.069
1.139
1.208
1.278
1.361
1.417
1.556
1.694
1.778
1.972
2.028
2.111
2.278
2.528
2.778
3.028
1-44
SPUR GEARS 72 PITCH

AGMA 10
1/8 FACE
1/4 BORE
20 PRESSURE ANGLE
R
Inch
MATERIAL:
1
Precision
Component
303 Stainless Steel

T
1

2
.375
1/8
.125
SUB DRILL
#6-32 SET SCREW
4
O.D.
P.D.
.500
5
.2498 +.0005
-.0000
INCH COMPONENT
Catalog Number
303 Stainless
Steel
2024 Aluminum
Anodized
S1066Z-072S028
S1066Z-072S030
S1066Z-072S038
S1066Z-072S040
S1066Z-072S042
S1066Z-072S044
S1066Z-072S046
S1066Z-072S048
S1066Z-072S050
S1066Z-072S054
S1066Z-072S056
S1066Z-072S060
S1066Z-072S064
S1066Z-072S065
S1066Z-072S070
S1066Z-072S072
S1066Z-072S080
S1066Z-072S090
S1066Z-072S096
S1066Z-072S100
S1066Z-072S110
S1066Z-072S120
S1066Z-072S130
S1066Z-072S140
S1066Z-072S150
S1066Z-072S160
S1066Z-072S170
S1066Z-072S180
S1066Z-072S198
S1066Z-072S216
S1066Z-072A028
S1066Z-072A030
S1066Z-072A038
S1066Z-072A040
S1066Z-072A042
S1066Z-072A044
S1066Z-072A046
S1066Z-072A048
S1066Z-072A050
S1066Z-072A054
S1066Z-072A056
S1066Z-072A060
S1066Z-072A064
S1066Z-072A065
S1066Z-072A070
S1066Z-072A072
S1066Z-072A080
S1066Z-072A090
S1066Z-072A096
S1066Z-072A100
S1066Z-072A110
S1066Z-072A120
S1066Z-072A130
S1066Z-072A140
S1066Z-072A150
S1066Z-072A160
S1066Z-072A170
S1066Z-072A180
S1066Z-072A198
S1066Z-072A216
No.
of
Teeth
P.D.
O.D.
28
30
38
40
42
44
46
48
50
54
56
60
64
65
70
72
80
90
96
100
110
120
130
140
150
160
170
180
198
216
.3889
.4167
.5278
.5556
.5833
.6111
.6389
.6667
.6944
.7500
.7778
.8333
.8889
.9028
.9722
1.0000
1.1111
1.2500
1.3333
1.3889
1.5278
1.6667
1.8056
1.9444
2.0833
2.2222
2.3611
2.5000
2.7500
3.0000
.417
.444
.556
.583
.611
.639
.667
.694
.722
.778
.806
.861
.917
.931
1.000
1.028
1.139
1.278
1.361
1.417
1.556
1.694
1.833
1.972
2.111
2.250
2.389
2.528
2.778
3.028
1-45
7
8
9
10
11
12
13
14
15
16
I
R
T
1
2
SPUR GEARS 72 PITCH

AGMA 10
3/16 FACE
3/16 BORE
20 PRESSURE ANGLE
Inch
MATERIAL:
1
Precision
Component
303 Stainless Steel

.406
7/64
SUB DRILL
.187
#4-40 SET SCREW
4
O.D.
P.D.
.375
5
6
.1873 +.0005
-.0000
INCH COMPONENT
Catalog Number
7
8
9
10
11
12
13
14
15
16
303 Stainless
Steel
2024 Aluminum
Anodized
S1084Z-072S024
S1084Z-072S028
S1084Z-072S030
S1084Z-072S032
S1084Z-072S034
S1084Z-072S038
S1084Z-072S040
S1084Z-072S044
S1084Z-072S050
S1084Z-072S054
S1084Z-072S056
S1084Z-072S060
S1084Z-072S064
S1084Z-072S072
S1084Z-072S080
S1084Z-072S090
S1084Z-072S096
S1084Z-072S100
S1084Z-072S105
S1084Z-072S108
S1084Z-072S110
S1084Z-072S120
S1084Z-072S140
S1084Z-072S144
S1084Z-072S160
S1084Z-072S180
S1084Z-072S216
S1084Z-072S234
S1084Z-072S270
S1084Z-072S300
S1084Z-072A024
S1084Z-072A028
S1084Z-072A030
S1084Z-072A032
S1084Z-072A034
S1084Z-072A038
S1084Z-072A040
S1084Z-072A044
S1084Z-072A050
S1084Z-072A054
S1084Z-072A056
S1084Z-072A060
S1084Z-072A064
S1084Z-072A072
S1084Z-072A080
S1084Z-072A090
S1084Z-072A096
S1084Z-072A100
S1084Z-072A105
S1084Z-072A108
S1084Z-072A110
S1084Z-072A120
S1084Z-072A140
S1084Z-072A144
S1084Z-072A160
S1084Z-072A180
S1084Z-072A216
S1084Z-072A234
S1084Z-072A270
S1084Z-072A300
No.
of
Teeth
P.D.
O.D.
24
28
30
32
34
38
40
44
50
54
56
60
64
72
80
90
96
100
105
108
110
120
140
144
160
180
216
234
270
300
.3333
.3889
.4167
.4444
.4722
.5278
.5556
.6111
.6944
.7500
.7778
.8333
.8889
1.0000
1.1111
1.2500
1.3333
1.3889
1.4583
1.5000
1.5278
1.6667
1.9444
2.0000
2.2222
2.5000
3.0000
3.2500
3.7500
4.1667
.361
.417
.444
.472
.500
.556
.583
.639
.722
.778
.806
.861
.917
1.028
1.139
1.278
1.361
1.417
1.486
1.528
1.556
1.694
1.972
2.028
2.250
2.528
3.028
3.278
3.778
4.194
1-46
SPUR GEARS 72 PITCH

AGMA 10
3/16 FACE
1/4 BORE
20 PRESSURE ANGLE
R
Inch
MATERIAL:
1
Precision
Component
303 Stainless Steel

T
1

2
.437
1/8
.187
SUB DRILL
#6-32 SET SCREW
4
O.D.
P.D.
.500
5
.2498 +.0005
-.0000
INCH COMPONENT
Catalog Number
303 Stainless
Steel
2024 Aluminum
Anodized
S1086Z-072S028
S1086Z-072S030
S1086Z-072S038
S1086Z-072S040
S1086Z-072S042
S1086Z-072S044
S1086Z-072S046
S1086Z-072S048
S1086Z-072S050
S1086Z-072S054
S1086Z-072S060
S1086Z-072S063
S1086Z-072S064
S1086Z-072S070
S1086Z-072S072
S1086Z-072S080
S1086Z-072S090
S1086Z-072S096
S1086Z-072S100
S1086Z-072S110
S1086Z-072S120
S1086Z-072S126
S1086Z-072S130
S1086Z-072S136
S1086Z-072S140
S1086Z-072S150
S1086Z-072S160
S1086Z-072S180
S1086Z-072S252
S1086Z-072S300
S1086Z-072A028
S1086Z-072A030
S1086Z-072A038
S1086Z-072A040
S1086Z-072A042
S1086Z-072A044
S1086Z-072A046
S1086Z-072A048
S1086Z-072A050
S1086Z-072A054
S1086Z-072A060
S1086Z-072A063
S1086Z-072A064
S1086Z-072A070
S1086Z-072A072
S1086Z-072A080
S1086Z-072A090
S1086Z-072A096
S1086Z-072A100
S1086Z-072A110
S1086Z-072A120
S1086Z-072A126
S1086Z-072A130
S1086Z-072A136
S1086Z-072A140
S1086Z-072A150
S1086Z-072A160
S1086Z-072A180
S1086Z-072A252
S1086Z-072A300
No.
of
Teeth
P.D.
O.D.
28
30
38
40
42
44
46
48
50
54
60
63
64
70
72
80
90
96
100
110
120
126
130
136
140
150
160
180
252
300
.3889
.4167
.5278
.5556
.5833
.6111
.6389
.6667
.6944
.7500
.8333
.8750
.8889
.9722
1.0000
1.1111
1.2500
1.3333
1.3889
1.5278
1.6667
1.7500
1.8056
1.8889
1.9444
2.0833
2.2222
2.5000
3.5000
4.1667
.417
.444
.556
.583
.611
.639
.667
.694
.722
.778
.861
.903
.917
1.000
1.028
1.139
1.278
1.361
1.417
1.556
1.694
1.778
1.833
1.917
1.972
2.111
2.250
2.528
3.528
4.194
1-47
7
8
9
10
11
12
13
14
15
16
I
R
NONMETALLIC FAIRLOC HUB SPUR GEARS 72 PITCH

AGMA 10
3/16 FACE
3/16 & 1/4 BORE
20 PRESSURE ANGLE
MATERIAL:
SPECIFICATIONS:
Inch
Gear - Acetal
Hub - 303 Stainless Steel
For Fairloc Type Hub Gear

B Bore Ref.
C
E
.1873
.438
.453
.2498
.530
.483

14-1/2 P.A., teeth
not listed or different bore size.
This product is also available with

pin type hubs.
See our Web site: www.sdp-si.com
7
8
9
INCH COMPONENT
CATALOG NUMBER
S1V8 Z-072DS
No. of
Teeth
Code
Bore Code B Bore
.1873
4
.2498
6
10
11
12
13
14
15
16
B +.0005
-.0000
P.D. O.D.
#2-56
CAP SCREW
5
6
1-48
1
Precision
Component
.187
No. of
Teeth Code
No. of
Teeth
P.D.
O.D.
040
041
042
043
044
045
046
048
050
054
060
066
072
075
080
084
096
099
100
108
120
126
127
132
135
140
144
150
160
180
198
40
41
42
43
44
45
46
48
50
54
60
66
72
75
80
84
96
99
100
108
120
126
127
132
135
140
144
150
160
180
198
.5555
.5694
.5833
.5972
.6111
.6250
.6388
.6666
.6944
.7500
.8333
.9166
1.0000
1.0416
1.1111
1.1666
1.3333
1.3750
1.3888
1.5000
1.6666
1.7500
1.7638
1.8333
1.8750
1.9444
2.0000
2.0833
2.2222
2.5000
2.7500
.583
.597
.611
.625
.639
.653
.667
.694
.722
.778
.861
.944
1.028
1.069
1.139
1.194
1.361
1.403
1.417
1.528
1.694
1.778
1.792
1.861
1.903
1.972
2.028
2.111
2.250
2.528
2.778
NONMETALLIC HUBLESS SPUR GEARS 72 PITCH

AGMA 10
3/16 FACE
3/8 BORE
20 PRESSURE ANGLE
R
Inch
MATERIAL:
1
Precision
Component
Acetal

14-1/2 P.A., teeth not listed
or different bore size.

Fairloc hubs or pin type hubs.
2
3
O.D. P.D.
.3750 +.0005
-.0000
4
5
.187
INCH COMPONENT
CATALOG NUMBER
S1288Z-072D
No. of
Teeth
Code
6
No. of
Teeth Code
No. of
Teeth
P.D.
O.D.
040
041
042
043
044
045
046
048
050
054
060
066
072
075
080
084
096
099
100
108
120
126
127
132
135
140
144
150
160
180
198
40
41
42
43
44
45
46
48
50
54
60
66
72
75
80
84
96
99
100
108
120
126
127
132
135
140
144
150
160
180
198
.5555
.5694
.5833
.5972
.6111
.6250
.6388
.6666
.6944
.7500
.8333
.9166
1.0000
1.0416
1.1111
1.1666
1.3333
1.3750
1.3888
1.5000
1.6666
1.7500
1.7638
1.8333
1.8750
1.9444
2.0000
2.0833
2.2222
2.5000
2.7500
.583
.597
.611
.625
.639
.653
.667
.694
.722
.778
.861
.944
1.028
1.069
1.139
1.194
1.361
1.403
1.417
1.528
1.694
1.778
1.792
1.861
1.903
1.972
2.028
2.111
2.250
2.528
2.778
7
8
9
10
11
12
13
14
15
1-49
16
I
R
T
1
2
NONMETALLIC PIN TYPE HUB SPUR GEARS 72 PITCH

AGMA 10
3/16 FACE
3/16 & 1/4 BORE
20 PRESSURE ANGLE
Inch
MATERIAL:
Gear - Acetal
Fairloc hubs.
.437
1/8
.500
+.0005
P.D. O.D.
B -.0000
5
#6-32 SET SCREW
SUB DRILL
6
7
INCH COMPONENT
CATALOG NUMBER
S108 Z-072DS
No. of
Teeth
Code
8
9
Bore Code B Bore

.1873
4
.2498
6
10
11
12
13
14
15
16
1-50
1
Precision
Component
.187
No. of
Teeth Code
No. of
Teeth
P.D.
O.D.
040
041
042
043
044
045
046
048
050
054
060
066
072
075
080
084
096
099
100
108
120
126
127
132
135
140
144
150
160
180
198
40
41
42
43
44
45
46
48
50
54
60
66
72
75
80
84
96
99
100
108
120
126
127
132
135
140
144
150
160
180
198
.5555
.5694
.5833
.5972
.6111
.6250
.6388
.6666
.6944
.7500
.8333
.9166
1.0000
1.0416
1.1111
1.1666
1.3333
1.3750
1.3888
1.5000
1.6666
1.7500
1.7638
1.8333
1.8750
1.9444
2.0000
2.0833
2.2222
2.5000
2.7500
.583
.597
.611
.625
.639
.653
.667
.694
.722
.778
.861
.944
1.028
1.069
1.139
1.194
1.361
1.403
1.417
1.528
1.694
1.778
1.792
1.861
1.903
1.972
2.028
2.111
2.250
2.528
2.778

AGMA 10
1/8 FACE
1/8 BORE
20 PRESSURE ANGLE
R
Inch
MATERIAL:
1
Precision
Component
303 Stainless Steel

T
1

.406
.125
.250
.1248 +.0005
-.0000
.188 +.000
-.003
O.D.
P.D.
1/4
FOR CLAMPS
SEE INDEX
INCH COMPONENT
Catalog Number
303 Stainless
Steel
2024 Aluminum
Anodized
S1163Z-072S020
S1163Z-072S022
S1163Z-072S024
S1163Z-072S026
S1163Z-072S028
S1163Z-072S030
S1163Z-072S032
S1163Z-072S034
S1163Z-072S036
S1163Z-072S038
S1163Z-072S040
S1163Z-072S044
S1163Z-072S045
S1163Z-072S046
S1163Z-072S048
S1163Z-072S050
S1163Z-072S056
S1163Z-072S060
S1163Z-072S064
S1163Z-072S070
S1163Z-072S072
S1163Z-072S075
S1163Z-072S080
S1163Z-072S090
S1163Z-072S096
S1163Z-072S100
S1163Z-072S110
S1163Z-072S120
S1163Z-072S130
S1163Z-072S140
S1163Z-072A020
S1163Z-072A022
S1163Z-072A024
S1163Z-072A026
S1163Z-072A028
S1163Z-072A030
S1163Z-072A032
S1163Z-072A034
S1163Z-072A036
S1163Z-072A038
S1163Z-072A040
S1163Z-072A044
S1163Z-072A045
S1163Z-072A046
S1163Z-072A048
S1163Z-072A050
S1163Z-072A056
S1163Z-072A060
S1163Z-072A064
S1163Z-072A070
S1163Z-072A072
S1163Z-072A075
S1163Z-072A080
S1163Z-072A090
S1163Z-072A096
S1163Z-072A100
S1163Z-072A110
S1163Z-072A120
S1163Z-072A130
S1163Z-072A140
No.
of
Teeth
P.D.
O.D.
20
22
24
26
28
30
32
34
36
38
40
44
45
46
48
50
56
60
64
70
72
75
80
90
96
100
110
120
130
140
.2778
.3056
.3333
.3611
.3889
.4167
.4444
.4722
.5000
.5278
.5556
.6111
.6250
.6389
.6667
.6944
.7778
.8333
.8889
.9722
1.0000
1.0417
1.1111
1.2500
1.3333
1.3889
1.5278
1.6667
1.8056
1.9444
.306
.333
.361
.389
.417
.444
.472
.500
.528
.556
.583
.639
.653
.667
.694
.722
.806
.861
.917
1.000
1.028
1.069
1.139
1.278
1.361
1.417
1.556
1.694
1.833
1.972
1-51
7
8
9
10
11
12
13
14
15
16
I
R
T
1
2

AGMA 10
1/8 FACE
3/16 BORE
20 PRESSURE ANGLE
Inch
MATERIAL:
1
Precision
Component
303 Stainless Steel

.406
.125
.250
.1873 +.0005
-.0000
.250 +.000
-.003
4
O.D.
P.D.
5/16
5
6
INCH COMPONENT
Catalog Number
7
8
9
10
11
12
13
14
15
16
FOR CLAMPS
SEE INDEX
303 Stainless
Steel
2024 Aluminum
Anodized
S1164Z-072S024
S1164Z-072S027
S1164Z-072S028
S1164Z-072S030
S1164Z-072S032
S1164Z-072S036
S1164Z-072S038
S1164Z-072S040
S1164Z-072S042
S1164Z-072S044
S1164Z-072S045
S1164Z-072S046
S1164Z-072S048
S1164Z-072S050
S1164Z-072S054
S1164Z-072S060
S1164Z-072S064
S1164Z-072S070
S1164Z-072S072
S1164Z-072S080
S1164Z-072S084
S1164Z-072S090
S1164Z-072S096
S1164Z-072S100
S1164Z-072S108
S1164Z-072S110
S1164Z-072S120
S1164Z-072S126
S1164Z-072S130
S1164Z-072S140
S1164Z-072A024
S1164Z-072A027
S1164Z-072A028
S1164Z-072A030
S1164Z-072A032
S1164Z-072A036
S1164Z-072A038
S1164Z-072A040
S1164Z-072A042
S1164Z-072A044
S1164Z-072A045
S1164Z-072A046
S1164Z-072A048
S1164Z-072A050
S1164Z-072A054
S1164Z-072A060
S1164Z-072A064
S1164Z-072A070
S1164Z-072A072
S1164Z-072A080
S1164Z-072A084
S1164Z-072A090
S1164Z-072A096
S1164Z-072A100
S1164Z-072A108
S1164Z-072A110
S1164Z-072A120
S1164Z-072A126
S1164Z-072A130
S1164Z-072A140
1-52
No.
of
Teeth
P.D.
O.D.
24
27
28
30
32
36
38
40
42
44
45
46
48
50
54
60
64
70
72
80
84
90
96
100
108
110
120
126
130
140
.3333
.3750
.3889
.4167
.4444
.5000
.5278
.5556
.5833
.6111
.6250
.6389
.6667
.6944
.7500
.8333
.8889
.9722
1.0000
1.1111
1.1667
1.2500
1.3333
1.3889
1.5000
1.5278
1.6667
1.7500
1.8056
1.9444
.361
.403
.417
.444
.472
.528
.556
.583
.611
.639
.653
.667
.694
.722
.778
.861
.917
1.000
1.028
1.139
1.194
1.278
1.361
1.417
1.528
1.556
1.694
1.778
1.833
1.972

AGMA 10
1/8 FACE
1/4 BORE
20 PRESSURE ANGLE
R
Inch
MATERIAL:
1
Precision
Component
303 Stainless Steel

T
1

.406
.125
.250
.2498 +.0005
-.0000
.312 +.000
-.003
3/8
O.D. P.D.
5
FOR CLAMPS
SEE INDEX
INCH COMPONENT
Catalog Number
303 Stainless
Steel
2024 Aluminum
Anodized
S1166Z-072S027
S1166Z-072S028
S1166Z-072S030
S1166Z-072S032
S1166Z-072S036
S1166Z-072S038
S1166Z-072S040
S1166Z-072S042
S1166Z-072S044
S1166Z-072S045
S1166Z-072S046
S1166Z-072S048
S1166Z-072S050
S1166Z-072S056
S1166Z-072S060
S1166Z-072S063
S1166Z-072S064
S1166Z-072S070
S1166Z-072S072
S1166Z-072S075
S1166Z-072S080
S1166Z-072S090
S1166Z-072S099
S1166Z-072S108
S1166Z-072S126
S1166Z-072S144
S1166Z-072S180
S1166Z-072S198
S1166Z-072S216
S1166Z-072S297
S1166Z-072A027
S1166Z-072A028
S1166Z-072A030
S1166Z-072A032
S1166Z-072A036
S1166Z-072A038
S1166Z-072A040
S1166Z-072A042
S1166Z-072A044
S1166Z-072A045
S1166Z-072A046
S1166Z-072A048
S1166Z-072A050
S1166Z-072A056
S1166Z-072A060
S1166Z-072A063
S1166Z-072A064
S1166Z-072A070
S1166Z-072A072
S1166Z-072A075
S1166Z-072A080
S1166Z-072A090
S1166Z-072A099
S1166Z-072A108
S1166Z-072A126
S1166Z-072A144
S1166Z-072A180
S1166Z-072A198
S1166Z-072A216
S1166Z-072A297
No.
of
Teeth
P.D.
O.D.
27
28
30
32
36
38
40
42
44
45
46
48
50
56
60
63
64
70
72
75
80
90
99
108
126
144
180
198
216
297
.3750
.3889
.4167
.4444
.5000
.5278
.5556
.5833
.6111
.6250
.6389
.6667
.6944
.7778
.8333
.8750
.8889
.9722
1.0000
1.0417
1.1111
1.2500
1.3750
1.5000
1.7500
2.0000
2.5000
2.7500
3.0000
4.1250
.403
.417
.444
.472
.528
.556
.583
.611
.639
.653
.667
.694
.722
.806
.861
.903
.917
1.000
1.028
1.069
1.139
1.278
1.403
1.528
1.778
2.028
2.528
2.778
3.028
4.153
1-53
7
8
9
10
11
12
13
14
15
16
I
R
T
1
2
3

AGMA 10
1/8 FACE
3/8 BORE
20 PRESSURE ANGLE
Inch
MATERIAL:
1
Precision
Component
303 Stainless Steel

See Index for hubs.
B
(8 PLACES)
.3750 +.0000
-.0002
O.D. P.D. C
5
6
.125
INCH COMPONENT
7
8
9
10
11
12
13
14
15
16
Catalog Number
303 Stainless
Steel
2024 Aluminum
Anodized
S1268Z-072S043
S1268Z-072S048
S1268Z-072S054
S1268Z-072S060
S1268Z-072S064
S1268Z-072S072
S1268Z-072S080
S1268Z-072S084
S1268Z-072S090
S1268Z-072S096
S1268Z-072S100
S1268Z-072S105
S1268Z-072S108
S1268Z-072S110
S1268Z-072S120
S1268Z-072S130
S1268Z-072S140
S1268Z-072S144
S1268Z-072S150
S1268Z-072S160
S1268Z-072S170
S1268Z-072S180
S1268Z-072S192
S1268Z-072S200
S1268Z-072S210
S1268Z-072S216
S1268Z-072S288
S1268Z-072S297
S1268Z-072A043
S1268Z-072A048
S1268Z-072A054
S1268Z-072A060
S1268Z-072A064
S1268Z-072A072
S1268Z-072A080
S1268Z-072A084
S1268Z-072A090
S1268Z-072A096
S1268Z-072A100
S1268Z-072A105
S1268Z-072A108
S1268Z-072A110
S1268Z-072A120
S1268Z-072A130
S1268Z-072A140
S1268Z-072A144
S1268Z-072A150
S1268Z-072A160
S1268Z-072A170
S1268Z-072A180
S1268Z-072A192
S1268Z-072A200
S1268Z-072A210
S1268Z-072A216
S1268Z-072A288
S1268Z-072A297
1-54
No.
of
Teeth
P.D.
O.D.
B
Dia.
C
Dia.
43
48
54
60
64
72
80
84
90
96
100
105
108
110
120
130
140
144
150
160
170
180
192
200
210
216
288
297
.5972
.6667
.7500
.8333
.8889
1.0000
1.1111
1.1667
1.2500
1.3333
1.3889
1.4583
1.5000
1.5278
1.6667
1.8056
1.9444
2.0000
2.0833
2.2222
2.3611
2.5000
2.6667
2.7778
2.9167
3.0000
4.0000
4.1250
.625
.694
.778
.861
.917
1.028
1.139
1.194
1.278
1.361
1.417
1.486
1.528
1.556
1.694
1.833
1.972
2.028
2.111
2.250
2.389
2.528
2.694
2.806
2.944
3.028
4.028
4.153
3/8
3/8
3/8
3/8
3/8
3/8
3/8
1/2
1/2
1-3/8
1-3/8
1-3/8
1-3/4
1-3/4
1-3/4
1-3/4
2-1/4
2-1/2
ALUMINUM-ACETAL GEARS 72 PITCH

AGMA 10
1/8 FACE
3/8 BORE
20 PRESSURE ANGLE
R
Inch
MATERIAL:
1
Precision
Component
Core - Aluminum 2024-T3, Chemical Filmed

Rim - Acetal
T
1

bore size and/or material.
See Index for hubs.
2
B
(8 PLACES)
O.D. P.D.
3
4
.3750 +.0000
-.0002
5
6
.125
INCH COMPONENT
Catalog Number
No.
of
Teeth
P.D.
O.D.
A
Dia.
B
Dia.
C
Dia.
S1268Z-072M072
S1268Z-072M081
S1268Z-072M090
S1268Z-072M100
S1268Z-072M110
S1268Z-072M120
S1268Z-072M130
S1268Z-072M140
S1268Z-072M160
S1268Z-072M180
S1268Z-072M190
S1268Z-072M210
72
81
90
100
110
120
130
140
160
180
190
210
1.0000
1.1250
1.2500
1.3889
1.5278
1.6667
1.8056
1.9444
2.2222
2.5000
2.6389
2.9167
1.028
1.153
1.278
1.417
1.556
1.694
1.833
1.972
2.250
2.528
2.667
2.944
5/8
7/8
7/8
1-1/8
1-1/8
1-3/8
1-3/8
1-5/8
1-7/8
2-1/8
2-3/8
2-5/8
7/32
5/16
3/8
3/8
3/8
3/16
1-3/32
1-3/8
1-3/8
1-3/4
7
8
9
10
11
12
13
14
15
1-55
16
I
R
T
1
2
3

AGMA 12
1/8 FACE
11/16 BORE
20 PRESSURE ANGLE
Inch
MATERIAL:
1
Precision
Component
303 Stainless Steel

be assembled, free of charge, to differentials
which are ordered at the same time.
.125
4
O.D.
P.D.
.6875 +.0003
-.0000
5
6
INCH COMPONENT
Catalog Number
7
8
9
303 Stainless
Steel
2024 Aluminum
Anodized
S1269Z-072S070C
S1269Z-072S072C
S1269Z-072S090C
S1269Z-072S096C
S1269Z-072S100C
S1269Z-072S120C
S1269Z-072S130C
S1269Z-072S140C
S1269Z-072S144C
S1269Z-072A070C
S1269Z-072A072C
S1269Z-072A090C
S1269Z-072A096C
S1269Z-072A100C
S1269Z-072A120C
S1269Z-072A130C
S1269Z-072A140C
S1269Z-072A144C
10
11
12
13
14
15
16
1-56
No.
of
Teeth
P.D.
70
72
90
96
100
120
130
140
144
.9722
1.0000
1.2500
1.3333
1.3889
1.6667
1.8056
1.9444
2.0000
O.D.
1.0000
1.0278
1.2778
1.3611
1.4167
1.6944
1.8333
1.9722
2.0278
SPUR GEARS 64 PITCH

AGMA 10
1/8 FACE
1/8 BORE
20 PRESSURE ANGLE
R
Inch
MATERIAL:
1
Precision
Component
303 Stainless Steel


2
.312
.125
3/32
SUB DRILL
#2-56 SET SCREW
O.D. P.D.
Catalog Number
2024 Aluminum
Anodized
S1063Z-064S018
S1063Z-064S021
S1063Z-064S022
S1063Z-064S024
S1063Z-064S025
S1063Z-064S028
S1063Z-064S030
S1063Z-064S032
S1063Z-064S034
S1063Z-064S036
S1063Z-064S038
S1063Z-064S040
S1063Z-064S044
S1063Z-064S046
S1063Z-064S048
S1063Z-064S050
S1063Z-064S055
S1063Z-064S056
S1063Z-064S060
S1063Z-064S064
S1063Z-064S070
S1063Z-064S072
S1063Z-064S080
S1063Z-064S084
S1063Z-064S090
S1063Z-064S096
S1063Z-064S112
S1063Z-064S120
S1063Z-064S128
S1063Z-064S136
S1063Z-064A018
S1063Z-064A021
S1063Z-064A022
S1063Z-064A024
S1063Z-064A025
S1063Z-064A028
S1063Z-064A030
S1063Z-064A032
S1063Z-064A034
S1063Z-064A036
S1063Z-064A038
S1063Z-064A040
S1063Z-064A044
S1063Z-064A046
S1063Z-064A048
S1063Z-064A050
S1063Z-064A055
S1063Z-064A056
S1063Z-064A060
S1063Z-064A064
S1063Z-064A070
S1063Z-064A072
S1063Z-064A080
S1063Z-064A084
S1063Z-064A090
S1063Z-064A096
S1063Z-064A112
S1063Z-064A120
S1063Z-064A128
S1063Z-064A136
.312
.1248 +.0005
-.0000
INCH COMPONENT
303 Stainless
Steel
No.
of
Teeth
P.D.
O.D.
18
21
22
24
25
28
30
32
34
36
38
40
44
46
48
50
55
56
60
64
70
72
80
84
90
96
112
120
128
136
.2813
.3281
.3438
.3750
.3906
.4375
.4688
.5000
.5313
.5625
.5938
.6250
.6875
.7188
.7500
.7813
.8594
.8750
.9375
1.0000
1.0938
1.1250
1.2500
1.3125
1.4063
1.5000
1.7500
1.8750
2.0000
2.1250
.313
.359
.375
.406
.422
.469
.500
.531
.563
.594
.625
.656
.719
.750
.781
.813
.891
.906
.969
1.031
1.125
1.156
1.281
1.344
1.438
1.531
1.781
1.906
2.031
2.156
7
8
9
10
11
12
13
14
15
1-57
16
I
R
T
1
2
SPUR GEARS 64 PITCH

AGMA 10
1/8 FACE
3/16 BORE
20 PRESSURE ANGLE
Inch
MATERIAL:
1
Precision
Component
303 Stainless Steel

.343
.125
7/64
SUB DRILL
#4-40 SET SCREW
4
O.D.
P.D.
.375
5
.1873 +.0005
-.0000
INCH COMPONENT
Catalog Number
7
8
9
10
11
12
13
14
15
16
303 Stainless
Steel
2024 Aluminum
Anodized
S1064Z-064S022
S1064Z-064S024
S1064Z-064S025
S1064Z-064S026
S1064Z-064S027
S1064Z-064S028
S1064Z-064S029
S1064Z-064S030
S1064Z-064S031
S1064Z-064S032
S1064Z-064S034
S1064Z-064S035
S1064Z-064S036
S1064Z-064S038
S1064Z-064S040
S1064Z-064S042
S1064Z-064S044
S1064Z-064S045
S1064Z-064S046
S1064Z-064S048
S1064Z-064S050
S1064Z-064S055
S1064Z-064S056
S1064Z-064S060
S1064Z-064S064
S1064Z-064S065
S1064Z-064S070
S1064Z-064S072
S1064Z-064S075
S1064Z-064S080
S1064Z-064A022
S1064Z-064A024
S1064Z-064A025
S1064Z-064A026
S1064Z-064A027
S1064Z-064A028
S1064Z-064A029
S1064Z-064A030
S1064Z-064A031
S1064Z-064A032
S1064Z-064A034
S1064Z-064A035
S1064Z-064A036
S1064Z-064A038
S1064Z-064A040
S1064Z-064A042
S1064Z-064A044
S1064Z-064A045
S1064Z-064A046
S1064Z-064A048
S1064Z-064A050
S1064Z-064A055
S1064Z-064A056
S1064Z-064A060
S1064Z-064A064
S1064Z-064A065
S1064Z-064A070
S1064Z-064A072
S1064Z-064A075
S1064Z-064A080
No.
of
Teeth
P.D.
O.D.
22
24
25
26
27
28
29
30
31
32
34
35
36
38
40
42
44
45
46
48
50
55
56
60
64
65
70
72
75
80
.3438
.3750
.3906
.4063
.4219
.4375
.4531
.4688
.4844
.5000
.5313
.5469
.5625
.5938
.6250
.6563
.6875
.7031
.7188
.7500
.7813
.8594
.8750
.9375
1.0000
1.0156
1.0938
1.1250
1.1719
1.2500
.375
.406
.422
.438
.453
.469
.484
.500
.516
.531
.563
.578
.594
.625
.656
.688
.719
.734
.750
.781
.813
.891
.906
.969
1.031
1.047
1.125
1.156
1.203
1.281
1-58
SPUR GEARS 64 PITCH

AGMA 10
1/8 FACE
3/16 BORE
20 PRESSURE ANGLE
R
Inch
MATERIAL:
1
Precision
Component
303 Stainless Steel

T
1

2
.343
.125
7/64
SUB DRILL
#4-40 SET SCREW
4
O.D.
P.D.
.375
5
.1873 +.0005
-.0000
INCH COMPONENT
Catalog Number
303 Stainless
Steel
2024 Aluminum
Anodized
S1064Z-064S084
S1064Z-064S085
S1064Z-064S088
S1064Z-064S090
S1064Z-064S092
S1064Z-064S095
S1064Z-064S096
S1064Z-064S100
S1064Z-064S105
S1064Z-064S110
S1064Z-064S115
S1064Z-064S120
S1064Z-064S122
S1064Z-064S124
S1064Z-064S128
S1064Z-064S130
S1064Z-064S136
S1064Z-064S140
S1064Z-064S144
S1064Z-064S150
S1064Z-064S152
S1064Z-064S160
S1064Z-064S168
S1064Z-064S170
S1064Z-064S176
S1064Z-064S184
S1064Z-064S192
S1064Z-064S200
S1064Z-064S224
S1064Z-064S256
S1064Z-064A084
S1064Z-064A085
S1064Z-064A088
S1064Z-064A090
S1064Z-064A092
S1064Z-064A095
S1064Z-064A096
S1064Z-064A100
S1064Z-064A105
S1064Z-064A110
S1064Z-064A115
S1064Z-064A120
S1064Z-064A122
S1064Z-064A124
S1064Z-064A128
S1064Z-064A130
S1064Z-064A136
S1064Z-064A140
S1064Z-064A144
S1064Z-064A150
S1064Z-064A152
S1064Z-064A160
S1064Z-064A168
S1064Z-064A170
S1064Z-064A176
S1064Z-064A184
S1064Z-064A192
S1064Z-064A200
S1064Z-064A224
S1064Z-064A256
No.
of
Teeth
P.D.
O.D.
84
85
88
90
92
95
96
100
105
110
115
120
122
124
128
130
136
140
144
150
152
160
168
170
176
184
192
200
224
256
1.3125
1.3281
1.3750
1.4063
1.4375
1.4844
1.5000
1.5625
1.6406
1.7188
1.7969
1.8750
1.9063
1.9375
2.0000
2.0313
2.1250
2.1875
2.2500
2.3438
2.3750
2.5000
2.6250
2.6563
2.7500
2.8750
3.0000
3.1250
3.5000
4.0000
1.344
1.359
1.406
1.438
1.469
1.516
1.531
1.594
1.672
1.750
1.828
1.906
1.938
1.969
2.031
2.063
2.156
2.219
2.281
2.375
2.406
2.531
2.656
2.688
2.781
2.906
3.031
3.156
3.531
4.031
1-59
7
8
9
10
11
12
13
14
15
16
I
R
T
1
2
SPUR GEARS 64 PITCH

AGMA 10
1/8 FACE
1/4 BORE
20 PRESSURE ANGLE
Inch
MATERIAL:
303 Stainless Steel

.375
.125
O.D.
P.D.
7
8
9
10
11
12
13
14
15
16
1/8
SUB DRILL
#6-32 SET SCREW
1
Precision
Component
.500
.2498 +.0005
-.0000
INCH COMPONENT
Catalog Number
303 Stainless
Steel
2024 Aluminum
Anodized
S1066Z-064S026
S1066Z-064S027
S1066Z-064S030
S1066Z-064S032
S1066Z-064S034
S1066Z-064S035
S1066Z-064S036
S1066Z-064S038
S1066Z-064S040
S1066Z-064S042
S1066Z-064S044
S1066Z-064S045
S1066Z-064S046
S1066Z-064S048
S1066Z-064S050
S1066Z-064S054
S1066Z-064S055
S1066Z-064S056
S1066Z-064S060
S1066Z-064S064
S1066Z-064S070
S1066Z-064S072
S1066Z-064S075
S1066Z-064S080
S1066Z-064S084
S1066Z-064S085
S1066Z-064S086
S1066Z-064S090
S1066Z-064S095
S1066Z-064S096
S1066Z-064A026
S1066Z-064A027
S1066Z-064A030
S1066Z-064A032
S1066Z-064A034
S1066Z-064A035
S1066Z-064A036
S1066Z-064A038
S1066Z-064A040
S1066Z-064A042
S1066Z-064A044
S1066Z-064A045
S1066Z-064A046
S1066Z-064A048
S1066Z-064A050
S1066Z-064A054
S1066Z-064A055
S1066Z-064A056
S1066Z-064A060
S1066Z-064A064
S1066Z-064A070
S1066Z-064A072
S1066Z-064A075
S1066Z-064A080
S1066Z-064A084
S1066Z-064A085
S1066Z-064A086
S1066Z-064A090
S1066Z-064A095
S1066Z-064A096
No.
of
Teeth
26
27
30
32
34
35
36
38
40
42
44
45
46
48
50
54
55
56
60
64
70
72
75
80
84
85
86
90
95
96
1-60
P.D.
O.D.
.4063
.4219
.4688
.5000
.5313
.5469
.5625
.5938
.6250
.6563
.6875
.7031
.7188
.7500
.7813
.8438
.8594
.8750
.9375
1.0000
1.0938
1.1250
1.1719
1.2500
1.3125
1.3281
1.3438
1.4063
1.4844
1.5000
.438
.453
.500
.531
.563
.578
.594
.625
.656
.688
.719
.734
.750
.781
.813
.875
.891
.906
.969
1.031
1.125
1.156
1.203
1.281
1.344
1.359
1.375
1.438
1.516
1.531
SPUR GEARS 64 PITCH

AGMA 10
1/8 FACE
1/4 BORE
20 PRESSURE ANGLE
R
Inch
MATERIAL:
1
Precision
Component
303 Stainless Steel


.375
.125
1/8
SUB DRILL
#6-32 SET SCREW
O.D.
P.D.
.500
.2498 +.0005
-.0000
INCH COMPONENT
Catalog Number
303 Stainless
Steel
2024 Aluminum
Anodized
S1066Z-064S100
S1066Z-064S104
S1066Z-064S110
S1066Z-064S112
S1066Z-064S120
S1066Z-064S124
S1066Z-064S128
S1066Z-064S130
S1066Z-064S135
S1066Z-064S136
S1066Z-064S140
S1066Z-064S144
S1066Z-064S150
S1066Z-064S152
S1066Z-064S160
S1066Z-064S165
S1066Z-064S168
S1066Z-064S170
S1066Z-064S176
S1066Z-064S184
S1066Z-064S192
S1066Z-064S200
S1066Z-064S208
S1066Z-064S216
S1066Z-064S224
S1066Z-064S232
S1066Z-064S240
S1066Z-064S248
S1066Z-064S256
S1066Z-064S264
S1066Z-064A100
S1066Z-064A104
S1066Z-064A110
S1066Z-064A112
S1066Z-064A120
S1066Z-064A124
S1066Z-064A128
S1066Z-064A130
S1066Z-064A135
S1066Z-064A136
S1066Z-064A140
S1066Z-064A144
S1066Z-064A150
S1066Z-064A152
S1066Z-064A160
S1066Z-064A165
S1066Z-064A168
S1066Z-064A170
S1066Z-064A176
S1066Z-064A184
S1066Z-064A192
S1066Z-064A200
S1066Z-064A208
S1066Z-064A216
S1066Z-064A224
S1066Z-064A232
S1066Z-064A240
S1066Z-064A248
S1066Z-064A256
S1066Z-064A264
6
No.
of
Teeth
P.D.
O.D.
100
104
110
112
120
124
128
130
135
136
140
144
150
152
160
165
168
170
176
184
192
200
208
216
224
232
240
248
256
264
1.5625
1.6250
1.7188
1.7500
1.8750
1.9375
2.0000
2.0313
2.1094
2.1250
2.1875
2.2500
2.3438
2.3750
2.5000
2.5781
2.6250
2.6563
2.7500
2.8750
3.0000
3.1250
3.2500
3.3750
3.5000
3.6250
3.7500
3.8750
4.0000
4.1250
1.594
1.656
1.750
1.781
1.906
1.969
2.031
2.063
2.141
2.156
2.219
2.281
2.375
2.406
2.531
2.609
2.656
2.688
2.781
2.906
3.031
3.156
3.281
3.406
3.531
3.656
3.781
3.906
4.031
4.156
1-61
7
8
9
10
11
12
13
14
15
16
I
R
T
1
2
SPUR GEARS 64 PITCH

AGMA 10
3/16 FACE
3/16 BORE
20 PRESSURE ANGLE
Inch
MATERIAL:
1
Precision
Component
303 Stainless Steel

.406
7/64
SUB DRILL
.187
#4-40 SET SCREW
4
O.D.
P.D.
.375
5
6
.1873 +.0005
-.0000
INCH COMPONENT
Catalog Number
7
8
9
10
11
12
13
14
15
16
303 Stainless
Steel
2024 Aluminum
Anodized
S1084Z-064S022
S1084Z-064S025
S1084Z-064S028
S1084Z-064S030
S1084Z-064S032
S1084Z-064S036
S1084Z-064S040
S1084Z-064S046
S1084Z-064S048
S1084Z-064S050
S1084Z-064S060
S1084Z-064S064
S1084Z-064S070
S1084Z-064S075
S1084Z-064S080
S1084Z-064S088
S1084Z-064S096
S1084Z-064S100
S1084Z-064S105
S1084Z-064S110
S1084Z-064S120
S1084Z-064S128
S1084Z-064S136
S1084Z-064S144
S1084Z-064S152
S1084Z-064S160
S1084Z-064S192
S1084Z-064S200
S1084Z-064S240
S1084Z-064S264
S1084Z-064A022
S1084Z-064A025
S1084Z-064A028
S1084Z-064A030
S1084Z-064A032
S1084Z-064A036
S1084Z-064A040
S1084Z-064A046
S1084Z-064A048
S1084Z-064A050
S1084Z-064A060
S1084Z-064A064
S1084Z-064A070
S1084Z-064A075
S1084Z-064A080
S1084Z-064A088
S1084Z-064A096
S1084Z-064A100
S1084Z-064A105
S1084Z-064A110
S1084Z-064A120
S1084Z-064A128
S1084Z-064A136
S1084Z-064A144
S1084Z-064A152
S1084Z-064A160
S1084Z-064A192
S1084Z-064A200
S1084Z-064A240
S1084Z-064A264
No.
of
Teeth
P.D.
O.D.
22
25
28
30
32
36
40
46
48
50
60
64
70
75
80
88
96
100
105
110
120
128
136
144
152
160
192
200
240
264
.3438
.3906
.4375
.4688
.5000
.5625
.6250
.7188
.7500
.7813
.9375
1.0000
1.0938
1.1719
1.2500
1.3750
1.5000
1.5625
1.6406
1.7188
1.8750
2.0000
2.1250
2.2500
2.3750
2.5000
3.0000
3.1250
3.7500
4.1250
.375
.422
.469
.500
.531
.594
.656
.750
.781
.813
.969
1.031
1.125
1.203
1.281
1.406
1.531
1.594
1.672
1.750
1.906
2.031
2.156
2.281
2.406
2.531
3.031
3.156
3.781
4.156
1-62
SPUR GEARS 64 PITCH

AGMA 10
3/16 FACE
1/4 BORE
20 PRESSURE ANGLE
R
Inch
MATERIAL:
1
Precision
Component
303 Stainless Steel

T
1

2
.437
.187
1/8
SUB DRILL
#6-32 SET SCREW
4
O.D.
P.D.
.500
5
.2498 +.0005
-.0000
INCH COMPONENT
Catalog Number
303 Stainless
Steel
2024 Aluminum
Anodized
S1086Z-064S026
S1086Z-064S028
S1086Z-064S032
S1086Z-064S038
S1086Z-064S040
S1086Z-064S042
S1086Z-064S048
S1086Z-064S050
S1086Z-064S056
S1086Z-064S060
S1086Z-064S064
S1086Z-064S070
S1086Z-064S072
S1086Z-064S080
S1086Z-064S084
S1086Z-064S090
S1086Z-064S096
S1086Z-064S104
S1086Z-064S112
S1086Z-064S128
S1086Z-064S130
S1086Z-064S144
S1086Z-064S160
S1086Z-064S176
S1086Z-064S192
S1086Z-064S200
S1086Z-064S224
S1086Z-064S240
S1086Z-064S256
S1086Z-064S264
S1086Z-064A026
S1086Z-064A028
S1086Z-064A032
S1086Z-064A038
S1086Z-064A040
S1086Z-064A042
S1086Z-064A048
S1086Z-064A050
S1086Z-064A056
S1086Z-064A060
S1086Z-064A064
S1086Z-064A070
S1086Z-064A072
S1086Z-064A080
S1086Z-064A084
S1086Z-064A090
S1086Z-064A096
S1086Z-064A104
S1086Z-064A112
S1086Z-064A128
S1086Z-064A130
S1086Z-064A144
S1086Z-064A160
S1086Z-064A176
S1086Z-064A192
S1086Z-064A200
S1086Z-064A224
S1086Z-064A240
S1086Z-064A256
S1086Z-064A264
6
No.
of
Teeth
P.D.
O.D.
26
28
32
38
40
42
48
50
56
60
64
70
72
80
84
90
96
104
112
128
130
144
160
176
192
200
224
240
256
264
.4063
.4375
.5000
.5938
.6250
.6563
.7500
.7813
.8750
.9375
1.0000
1.0938
1.1250
1.2500
1.3125
1.4063
1.5000
1.6250
1.7500
2.0000
2.0313
2.2500
2.5000
2.7500
3.0000
3.1250
3.5000
3.7500
4.0000
4.1250
.438
.469
.531
.625
.656
.688
.781
.813
.906
.969
1.031
1.125
1.156
1.281
1.344
1.438
1.531
1.656
1.781
2.031
2.063
2.281
2.531
2.781
3.031
3.156
3.531
3.781
4.031
4.156
1-63
7
8
9
10
11
12
13
14
15
16
I
R
NONMETALLIC SPUR GEARS, FAIRLOC HUB 64 PITCH

AGMA 10
3/16 FACE
3/16 & 1/4 BORE
20 PRESSURE ANGLE
MATERIAL:
SPECIFICATIONS:
Inch
Gear - Acetal

B Bore Ref.
C
E
.1873
.438
.453
.2498
.530
.483

14-1/2 pressure angle, teeth
not listed or different bore size.

pin type hubs.
7
8
INCH COMPONENT
CATALOG NUMBER
S1V8 Z-064DS
No. of
Teeth
Code
Bore Code B Bore
4
.1873
6
.2498
9
10
11
12
13
14
15
16
B +.0005
-.0000
P.D. O.D.
#2-56
CAP SCREW
5
6
1-64
1
Precision
Component
.187
No. of
Teeth Code
No. of
Teeth
P.D.
O.D.
036
037
038
040
042
044
046
048
050
056
060
064
072
074
080
084
088
090
096
100
112
120
127
128
144
152
160
168
176
184
192
224
36
37
38
40
42
44
46
48
50
56
60
64
72
74
80
84
88
90
96
100
112
120
127
128
144
152
160
168
176
184
192
224
.5625
.5781
.5938
.6250
.6563
.6875
.7188
.7500
.7813
.8750
.9375
1.0000
1.1250
1.1563
1.2500
1.3125
1.3750
1.4063
1.5000
1.5625
1.7500
1.8750
1.9844
2.0000
2.2500
2.3750
2.5000
2.6250
2.7500
2.8750
3.0000
3.5000
.594
.609
.625
.656
.688
.719
.750
.781
.813
.906
.969
1.031
1.156
1.188
1.281
1.344
1.406
1.438
1.531
1.594
1.781
1.906
2.016
2.031
2.281
2.406
2.531
2.656
2.781
2.906
3.031
3.531

AGMA 10
3/16 FACE
3/8 BORE
20 PRESSURE ANGLE
R
Inch
MATERIAL:
1
Precision
Component
Acetal


2
3
O.D. P.D.
.3750 +.0005
-.0000
4
5
.187
INCH COMPONENT
CATALOG NUMBER
S1288Z-064D
No. of
Teeth
Code
No. of
Teeth Code
No. of
Teeth
P.D.
O.D.
036
037
038
040
042
044
046
048
050
056
060
064
072
074
080
084
088
090
096
100
112
120
127
128
144
152
160
168
176
184
192
224
36
37
38
40
42
44
46
48
50
56
60
64
72
74
80
84
88
90
96
100
112
120
127
128
144
152
160
168
176
184
192
224
.5625
.5781
.5938
.6250
.6563
.6875
.7188
.7500
.7813
.8750
.9375
1.0000
1.1250
1.1563
1.2500
1.3125
1.3750
1.4063
1.5000
1.5625
1.7500
1.8750
1.9844
2.0000
2.2500
2.3750
2.5000
2.6250
2.7500
2.8750
3.0000
3.5000
.594
.609
.625
.656
.688
.719
.750
.781
.813
.906
.969
1.031
1.156
1.188
1.281
1.344
1.406
1.438
1.531
1.594
1.781
1.906
2.016
2.031
2.281
2.406
2.531
2.656
2.781
2.906
3.031
3.531
6
7
8
9
10
11
12
13
14
15
1-65
16
I
R
T
1
2

AGMA 10
3/16 FACE
3/16 & 1/4 BORE
20 PRESSURE ANGLE
Inch
MATERIAL:
Gear - Acetal
.437

Fairloc hubs.
1/8
3
.500
+.0005
P.D. O.D.
B -.0000
4
#6-32 SET SCREW
SUB DRILL
5
6
INCH COMPONENT
CATALOG NUMBER
S108 Z-064DS
No. of
Teeth
Code
7
8
Bore Code B Bore

.1873
4
.2498
6
9
10
11
12
13
14
15
16
1-66
1
Precision
Component
.187
No. of
Teeth Code
No. of
Teeth
P.D.
O.D.
036
037
038
040
042
044
046
048
050
056
060
064
072
074
080
084
088
090
096
100
112
120
127
128
144
152
160
168
176
184
192
224
36
37
38
40
42
44
46
48
50
56
60
64
72
74
80
84
88
90
96
100
112
120
127
128
144
152
160
168
176
184
192
224
.5625
.5781
.5938
.6250
.6563
.6875
.7188
.7500
.7813
.8750
.9375
1.0000
1.1250
1.1563
1.2500
1.3125
1.3750
1.4063
1.5000
1.5625
1.7500
1.8750
1.9844
2.0000
2.2500
2.3750
2.5000
2.6250
2.7500
2.8750
3.0000
3.5000
.594
.609
.625
.656
.688
.719
.750
.781
.813
.906
.969
1.031
1.156
1.188
1.281
1.344
1.406
1.438
1.531
1.594
1.781
1.906
2.016
2.031
2.281
2.406
2.531
2.656
2.781
2.906
3.031
3.531
NONMETALLIC SPUR GEARS 64 PITCH

AGMA 8
1/8 FACE
20 PRESSURE ANGLE
R
Inch
MATERIAL:
Gear - Acetal
Insert - Brass
SPECIFICATION:
T
1
Gears under 80 teeth have no webs

Gears with:
3/8
Bore Set Screw & Sub Drill

.125
#2-56
.1875
#4-40
.250
#6-32
1/8
SUB DRILL
SET SCREW
3
O.D. P.D.
4
+.001
BORE -.000
1/8
INCH COMPONENT
CATALOG NUMBER
A 1P 2-Y64
No. of
Teeth
Code
6
BORE CODE
A .125 Dia.
B .1875 Dia.
C .250 Dia.
No.
No. of
of
Teeth Code Teeth
038
040
042
044
046
048
050
055
056
060
064
072
074
075
080
084
085
38
40
42
44
46
48
50
55
56
60
64
72
74
75
80
84
85
P.D.
O.D.
C
Hub
Dia.
.594
.625
.656
.688
.719
.750
.781
.859
.875
.938
1.000
1.125
1.156
1.172
1.250
1.313
1.328
.625
.656
.688
.719
.750
.781
.813
.891
.906
.969
1.031
1.156
1.188
1.203
1.281
1.344
1.359
33/64
33/64
33/64
33/64
33/64
33/64
33/64
33/64
33/64
33/64
5/8
5/8
5/8
5/8
5/8
5/8
5/8
No.
No. of
of
Teeth Code Teeth
088
090
092
095
096
100
110
112
120
127
128
130
144
152
160
168
174
88
90
92
95
96
100
110
112
120
127
128
130
144
152
160
168
174
P.D.
O.D.
C
Hub
Dia.
1.375
1.406
1.438
1.484
1.500
1.563
1.719
1.750
1.875
1.984
2.000
2.031
2.250
2.375
2.500
2.625
2.719
1.406
1.438
1.469
1.516
1.531
1.594
1.750
1.781
1.906
2.016
2.031
2.063
2.281
2.406
2.531
2.656
2.750
5/8
5/8
5/8
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
9
10
11
12
13
14
15
1-67
16
I
R
T
1
2

AGMA 10
1/8 FACE
1/8 BORE
20 PRESSURE ANGLE
Inch
MATERIAL:
303 Stainless Steel

.406
.125
.250
.1248 +.0005
-.0000
.188 +.000
-.003
O.D.
5
6
7
8
9
10
11
12
13
14
15
16
1
Precision
Component
P.D.
1/4
FOR CLAMPS
SEE INDEX
INCH COMPONENT
Catalog Number
303 Stainless
Steel
2024 Aluminum
Anodized
S1163Z-064S018
S1163Z-064S021
S1163Z-064S022
S1163Z-064S024
S1163Z-064S025
S1163Z-064S028
S1163Z-064S030
S1163Z-064S032
S1163Z-064S034
S1163Z-064S036
S1163Z-064S038
S1163Z-064S040
S1163Z-064S044
S1163Z-064S046
S1163Z-064S048
S1163Z-064S050
S1163Z-064S055
S1163Z-064S056
S1163Z-064S060
S1163Z-064S064
S1163Z-064S070
S1163Z-064S072
S1163Z-064S080
S1163Z-064S084
S1163Z-064S090
S1163Z-064S096
S1163Z-064S112
S1163Z-064S120
S1163Z-064S128
S1163Z-064S136
S1163Z-064A018
S1163Z-064A021
S1163Z-064A022
S1163Z-064A024
S1163Z-064A025
S1163Z-064A028
S1163Z-064A030
S1163Z-064A032
S1163Z-064A034
S1163Z-064A036
S1163Z-064A038
S1163Z-064A040
S1163Z-064A044
S1163Z-064A046
S1163Z-064A048
S1163Z-064A050
S1163Z-064A055
S1163Z-064A056
S1163Z-064A060
S1163Z-064A064
S1163Z-064A070
S1163Z-064A072
S1163Z-064A080
S1163Z-064A084
S1163Z-064A090
S1163Z-064A096
S1163Z-064A112
S1163Z-064A120
S1163Z-064A128
S1163Z-064A136
1-68
No.
of
Teeth
P.D.
O.D.
18
21
22
24
25
28
30
32
34
36
38
40
44
46
48
50
55
56
60
64
70
72
80
84
90
96
112
120
128
136
.2813
.3281
.3438
.3750
.3906
.4375
.4688
.5000
.5313
.5625
.5938
.6250
.6875
.7188
.7500
.7813
.8594
.8750
.9375
1.0000
1.0938
1.1250
1.2500
1.3125
1.4063
1.5000
1.7500
1.8750
2.0000
2.1250
.313
.359
.375
.406
.422
.469
.500
.531
.563
.594
.625
.656
.719
.750
.781
.813
.891
.906
.969
1.031
1.125
1.156
1.281
1.344
1.438
1.531
1.781
1.906
2.031
2.156

AGMA 10
1/8 FACE
3/16 BORE
20 PRESSURE ANGLE
R
Inch
MATERIAL:
1
Precision
Component
303 Stainless Steel

T
1

.406
.125
.250
.1873 +.0005
-.0000
.250 +.000
-.003
O.D.
P.D.
5/16
5
FOR CLAMPS
SEE INDEX
INCH COMPONENT
Catalog Number
303 Stainless
Steel
2024 Aluminum
Anodized
S1164Z-064S022
S1164Z-064S024
S1164Z-064S025
S1164Z-064S030
S1164Z-064S032
S1164Z-064S040
S1164Z-064S042
S1164Z-064S044
S1164Z-064S048
S1164Z-064S050
S1164Z-064S052
S1164Z-064S056
S1164Z-064S060
S1164Z-064S064
S1164Z-064S072
S1164Z-064S076
S1164Z-064S080
S1164Z-064S084
S1164Z-064S090
S1164Z-064S096
S1164Z-064S100
S1164Z-064S112
S1164Z-064S120
S1164Z-064S128
S1164Z-064S130
S1164Z-064S144
S1164Z-064S160
S1164Z-064S180
S1164Z-064S224
S1164Z-064S264
S1164Z-064A022
S1164Z-064A024
S1164Z-064A025
S1164Z-064A030
S1164Z-064A032
S1164Z-064A040
S1164Z-064A042
S1164Z-064A044
S1164Z-064A048
S1164Z-064A050
S1164Z-064A052
S1164Z-064A056
S1164Z-064A060
S1164Z-064A064
S1164Z-064A072
S1164Z-064A076
S1164Z-064A080
S1164Z-064A084
S1164Z-064A090
S1164Z-064A096
S1164Z-064A100
S1164Z-064A112
S1164Z-064A120
S1164Z-064A128
S1164Z-064A130
S1164Z-064A144
S1164Z-064A160
S1164Z-064A180
S1164Z-064A224
S1164Z-064A264
No.
of
Teeth
P.D.
O.D.
22
24
25
30
32
40
42
44
48
50
52
56
60
64
72
76
80
84
90
96
100
112
120
128
130
144
160
180
224
264
.3438
.3750
.3906
.4688
.5000
.6250
.6563
.6875
.7500
.7813
.8125
.8750
.9375
1.0000
1.1250
1.1875
1.2500
1.3125
1.4063
1.5000
1.5625
1.7500
1.8750
2.0000
2.0313
2.2500
2.5000
2.8125
3.5000
4.1250
.375
.406
.422
.500
.531
.656
.688
.719
.781
.813
.844
.906
.969
1.031
1.156
1.219
1.281
1.344
1.438
1.531
1.594
1.781
1.906
2.031
2.063
2.281
2.531
2.844
3.531
4.156
1-69
7
8
9
10
11
12
13
14
15
16
I
R
T
1
2

AGMA 10
1/8 FACE
1/4 BORE
20 PRESSURE ANGLE
Inch
MATERIAL:
1
Precision
Component
303 Stainless Steel

.406
.125
.250
.2498 +.0005
-.0000
.312 +.000
-.003
3/8
O.D. P.D.
5
6
FOR CLAMPS
SEE INDEX
INCH COMPONENT
Catalog Number
7
8
9
10
11
12
13
14
15
16
303 Stainless
Steel
2024 Aluminum
Anodized
S1166Z-064S026
S1166Z-064S030
S1166Z-064S032
S1166Z-064S036
S1166Z-064S040
S1166Z-064S046
S1166Z-064S048
S1166Z-064S050
S1166Z-064S060
S1166Z-064S064
S1166Z-064S070
S1166Z-064S072
S1166Z-064S080
S1166Z-064S084
S1166Z-064S088
S1166Z-064S090
S1166Z-064S096
S1166Z-064S112
S1166Z-064S120
S1166Z-064S128
S1166Z-064S130
S1166Z-064S140
S1166Z-064S144
S1166Z-064S160
S1166Z-064S176
S1166Z-064S184
S1166Z-064S192
S1166Z-064S224
S1166Z-064S256
S1166Z-064S264
S1166Z-064A026
S1166Z-064A030
S1166Z-064A032
S1166Z-064A036
S1166Z-064A040
S1166Z-064A046
S1166Z-064A048
S1166Z-064A050
S1166Z-064A060
S1166Z-064A064
S1166Z-064A070
S1166Z-064A072
S1166Z-064A080
S1166Z-064A084
S1166Z-064A088
S1166Z-064A090
S1166Z-064A096
S1166Z-064A112
S1166Z-064A120
S1166Z-064A128
S1166Z-064A130
S1166Z-064A140
S1166Z-064A144
S1166Z-064A160
S1166Z-064A176
S1166Z-064A184
S1166Z-064A192
S1166Z-064A224
S1166Z-064A256
S1166Z-064A264
1-70
No.
of
Teeth
P.D.
O.D.
26
30
32
36
40
46
48
50
60
64
70
72
80
84
88
90
96
112
120
128
130
140
144
160
176
184
192
224
256
264
.4063
.4688
.5000
.5625
.6250
.7188
.7500
.7813
.9375
1.0000
1.0938
1.1250
1.2500
1.3125
1.3750
1.4063
1.5000
1.7500
1.8750
2.0000
2.0313
2.1875
2.2500
2.5000
2.7500
2.8750
3.0000
3.5000
4.0000
4.1250
.438
.500
.531
.594
.656
.750
.781
.813
.969
1.031
1.125
1.156
1.281
1.344
1.406
1.438
1.531
1.781
1.906
2.031
2.063
2.219
2.281
2.531
2.781
2.906
3.031
3.531
4.031
4.156
CLAMP TYPE DIFFERENTIAL END GEARS 64 PITCH

AGMA 12
1/8 FACE
3/8 BORE
20 PRESSURE ANGLE
R
Inch
MATERIAL:
1
Precision
Component
303 Stainless Steel

T
1

.406
.125
.250
.3749 +.0005
-.0000
.437 +.000
-.003
1/2
O.D. P.D.
5
FOR CLAMPS
SEE INDEX
INCH COMPONENT
Catalog Number
303 Stainless
Steel
2024 Aluminum
Anodized
S1168Z-064S040C
S1168Z-064S048C
S1168Z-064S060C
S1168Z-064S064C
S1168Z-064S080C
S1168Z-064S090C
S1168Z-064S096C
S1168Z-064A040C
S1168Z-064A048C
S1168Z-064A060C
S1168Z-064A064C
S1168Z-064A080C
S1168Z-064A090C
S1168Z-064A096C
No.
of
Teeth
P.D.
O.D.
40
48
60
64
80
90
96
.6250
.7500
.9375
1.0000
1.2500
1.4062
1.5000
.6562
.7812
.9687
1.0312
1.2812
1.4375
1.5312
7
8
9
10
11
12
13
14
15
1-71
16
I
R
T
1
2
3

AGMA 10
1/8 FACE
3/8 BORE
20 PRESSURE ANGLE
Inch
MATERIAL:
1
Precision
Component
303 Stainless Steel

B
(8 PLACES)

See Index for hubs.
.3750 +.0000
-.0002
O.D. P.D. C
5
6
7
8
9
10
11
12
13
14
15
16
.125
INCH COMPONENT
Catalog Number
303 Stainless
Steel
2024 Aluminum
Anodized
S1268Z-064S038
S1268Z-064S040
S1268Z-064S048
S1268Z-064S050
S1268Z-064S064
S1268Z-064S072
S1268Z-064S075
S1268Z-064S080
S1268Z-064S084
S1268Z-064S090
S1268Z-064S092
S1268Z-064S096
S1268Z-064S100
S1268Z-064S105
S1268Z-064S110
S1268Z-064S120
S1268Z-064S128
S1268Z-064S130
S1268Z-064S140
S1268Z-064S144
S1268Z-064S150
S1268Z-064S160
S1268Z-064S168
S1268Z-064S170
S1268Z-064S180
S1268Z-064S184
S1268Z-064S192
S1268Z-064S224
S1268Z-064S256
S1268Z-064S264
S1268Z-064A038
S1268Z-064A040
S1268Z-064A048
S1268Z-064A050
S1268Z-064A064
S1268Z-064A072
S1268Z-064A075
S1268Z-064A080
S1268Z-064A084
S1268Z-064A090
S1268Z-064A092
S1268Z-064A096
S1268Z-064A100
S1268Z-064A105
S1268Z-064A110
S1268Z-064A120
S1268Z-064A128
S1268Z-064A130
S1268Z-064A140
S1268Z-064A144
S1268Z-064A150
S1268Z-064A160
S1268Z-064A168
S1268Z-064A170
S1268Z-064A180
S1268Z-064A184
S1268Z-064A192
S1268Z-064A224
S1268Z-064A256
S1268Z-064A264
1-72
No.
of
Teeth
P.D.
O.D.
B
Dia.
C
Dia.
38
40
48
50
64
72
75
80
84
90
92
96
100
105
110
120
128
130
140
144
150
160
168
170
180
184
192
224
256
264
.5938
.6250
.7500
.7813
1.0000
1.1250
1.1719
1.2500
1.3125
1.4063
1.4375
1.5000
1.5625
1.6406
1.7188
1.8750
2.0000
2.0313
2.1875
2.2500
2.3483
2.5000
2.6250
2.6563
2.8125
2.8750
3.0000
3.5000
4.0000
4.1250
.625
.656
.781
.813
1.031
1.156
1.203
1.281
1.344
1.438
1.469
1.531
1.594
1.672
1.750
1.906
2.031
2.063
2.219
2.281
2.375
2.531
2.656
2.688
2.844
2.906
3.031
3.531
4.031
4.156
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
38
1/2
1/2
1/2
1-3/8
1-3/8
1-3/8
1-3/8
1-3/4
1-3/4
1-3/4
1-3/4
1-3/4
2
2-1/4
2-1/2
STAMPED HUBLESS SPUR GEARS 64 PITCH

1/32 FACE
3/8 BORE
20 PRESSURE ANGLE
R
Inch
MATERIAL:
5052-H32 Aluminum Alloy
Please see Gear Hubs page

for available hub sizes.
T
1
The face of a stamped gear tooth has a

radius on the one side from the outside diameter
to slightly below the pitch diameter. In cases where
the material thickness approaches or exceeds the
tooth width at the pitch line, the face width of the tooth
at the outside diameter will be approximately 2/3
material thickness, and 80% to 90% of material at the
pitch diameter.
2
1/32
3
4
.375 +.002
-.001
P.D. O.D.
5
6
INCH COMPONENT
Catalog Number *
A
A
A
A
A
A
A
1S
1S
1S
1S
1S
1S
1S
1-Y64058
1-Y64063
1-Y64064
1-Y64068
1-Y64069
1-Y64072
1-Y64096
No.
of
Teeth
P.D.
O.D.
58
63
64
68
69
72
96
.906
.984
1.000
1.063
1.078
1.125
1.500
.938
1.016
1.031
1.095
1.109
1.156
1.531
7
8
9
* To be discontinued when present stock is depleted.
10
11
12
13
14
15
1-73
16

AGMA 10
1/8 FACE
3/8 BORE
20 PRESSURE ANGLE
R
Inch
MATERIAL:
1
Precision
Component

Rim - Acetal
T
1

See Index for hubs.
2
3
B
(8 PLACES)
4
O.D. P.D.
.3750 +.0000
-.0002
5
6
.125
INCH COMPONENT
Catalog Number
No.
of
Teeth
P.D.
O.D.
A
Dia.
B
Dia.
C
Dia.
S1268Z-064M064
S1268Z-064M072
S1268Z-064M080
S1268Z-064M085
S1268Z-064M090
S1268Z-064M096
S1268Z-064M110
S1268Z-064M120
S1268Z-064M130
S1268Z-064M140
S1268Z-064M150
S1268Z-064M160
S1268Z-064M180
S1268Z-064M192
64
72
80
85
90
96
110
120
130
140
150
160
180
192
1.0000
1.1250
1.2500
1.3281
1.4063
1.5000
1.7188
1.8750
2.0313
2.1875
2.3438
2.5000
2.8125
3.0000
1.031
1.156
1.281
1.359
1.438
1.531
1.750
1.906
2.063
2.219
2.375
2.531
2.844
3.031
5/8
7/8
7/8
7/8
1-1/8
1-1/8
1-3/8
1-5/8
1-5/8
1-7/8
2-1/8
2-1/8
2-3/8
2-5/8
7/32
7/32
5/16
3/8
3/8
3/8
3/8
1-3/16
1-3/16
1-3/32
1-3/8
1-3/8
1-3/8
1-3/4
8
9
10
11
12
13
14
15
1-74
REV: 8.23.12 mh
16

AGMA 12
20 PRESSURE ANGLE
MATERIAL:
Inch
303 Stainless Steel

1
Precision
Component

be assembled to differentials which are
ordered at the same time, free of charge.
T
1

2
.093
.125
3
4
O.D.
.6524 +.0003
-.0000
P.D.
O.D.
.9061 +.0003
-.0000
P.D.
5
6
Fig. 1
Fig. 2
INCH COMPONENT
Catalog Number
303 Stainless
Steel
2024 Aluminum
Anodized

S1249Z-064S072C
S1249Z-064A072C
S1249Z-064S080C
S1249Z-064A080C
S1249Z-064S090C
S1249Z-064A090C
S1249Z-064S096C
S1249Z-064A096C
S1249Z-064S100C
S1249Z-064A100C
S1249Z-064S110C
S1249Z-064A110C
S1249Z-064S120C
S1249Z-064A120C
S1269Z-064S080C
S1269Z-064A080C
S1269Z-064S090C
S1269Z-064A090C
S1269Z-064S096C
S1269Z-064A096C
S1269Z-064S100C
S1269Z-064A100C
S1269Z-064S110C
S1269Z-064A110C
S1269Z-064S120C
S1269Z-064A120C
S1269Z-064S130C
S1269Z-064A130C
No.
of
Teeth
P.D.
O.D.
72
80
90
96
100
110
120
1.1250
1.2500
1.4063
1.5000
1.5625
1.7188
1.8750
1.1563
1.2813
1.4375
1.5313
1.5938
1.7500
1.9063
80
90
96
100
110
120
130
1.2500
1.4063
1.5000
1.5625
1.7188
1.8750
2.0313
1.2813
1.4375
1.5313
1.5938
1.7500
1.9063
2.0625
10
11
12
13
14
15
1-75
16
I
R
T
FAIRLOC HUB GEARS 48 PITCH

AGMA 10
.197 & .250 FACE WIDTH
20 PRESSURE ANGLE
Inch
MATERIAL:
303 Stainless Steel
1
Precision
Component
SPECIFICATIONS:
1
2
Socket Head Cap Screw Supplied.

Fairloc hubs require controlled
shaft tolerances. Suggested
clearance fit between the bore and
the shaft is .0001/.0008.
E
E
D
.197
D
.250
B P.D. O.D.
B P.D. O.D.
4
T
5
6
7
Fig. 1
10
11
12
13
14
C
Dia.
Hub
Clear.
Rad.
.375
.417
.458
.542
.563
.625
.1248
.1248
.1248
.1873
.1873
.1873
.866
.866
.866
.866
.866
.866
.551
.551
.551
.551
.551
.551
.315
.315
.315
.315
.315
.315
#2-56
#2-56
#2-56
#2-56
#2-56
#2-56
.327
.327
.327
.327
.327
.327
.667
.708
.792
.875
.979
1.042
1.083
1.167
1.208
1.292
1.375
1.500
1.542
1.604
1.708
1.917
2.042
2.125
2.375
2.542
.2498
.2498
.2498
.2498
.2498
.2498
.2498
.2498
.2498
.2498
.3747
.3747
.3747
.3747
.3747
.3747
.3747
.3747
.3747
.3747
.591
.591
.591
.591
.591
.591
.591
.591
.591
.591
.750
.750
.750
.750
.750
.750
.750
.750
.750
.750
.669
.669
.669
.669
.669
.669
.669
.669
.669
.669
.945
.945
.945
.945
.945
.945
.945
.945
.945
.945
.394
.394
.394
.394
.394
.394
.394
.394
.394
.394
.551
.551
.551
.551
.551
.551
.551
.551
.551
.551
#2-56
#2-56
#2-56
#2-56
#2-56
#2-56
#2-56
#2-56
#2-56
#2-56
#6-32
#6-32
#6-32
#6-32
#6-32
#6-32
#6-32
#6-32
#6-32
#6-32
.445
.445
.445
.445
.445
.445
.445
.445
.445
.445
.551
.551
.551
.551
.551
.551
.551
.551
.551
.551
No.
of
Teeth
P.D.
O.D.
S1VS48-016F1608
S1VS48-018F1608
S1VS48-020F1608
S1VS48-024F1612
S1VS48-025F1612
S1VS48-028F1612
16
18
20
24
25
28
.3333
.3750
.4167
.5000
.5208
.5833
S1VS48-030F1316
S1VS48-032F1316
S1VS48-036F1316
S1VS48-040F1316
S1VS48-045F1316
S1VS48-048F1316
S1VS48-050F1316
S1VS48-054F1316
S1VS48-056F1316
S1VS48-060F1316
S1VS48-064F1324
S1VS48-070F1324
S1VS48-072F1324
S1VS48-075F1324
S1VS48-080F1324
S1VS48-090F1324
S1VS48-096F1324
S1VS48-100F1324
S1VS48-112F1324
S1VS48-120F1324
30
32
36
40
45
48
50
54
56
60
64
70
72
75
80
90
96
100
112
120
.6250
.6667
.7500
.8333
.9375
1.0000
1.0417
1.1250
1.1667
1.2500
1.3333
1.4583
1.5000
1.5625
1.6667
1.8750
2.0000
2.0833
2.3333
2.5000
Fig. 1
Fig. 2
B
Bore
Catalog Number
15
16
Fig. 2
INCH COMPONENT
8
9
1-76
+.0005
-.0000
SPUR GEARS 48 PITCH

AGMA 10
1/8 FACE
1/8 BORE
20 PRESSURE ANGLE
R
Inch
MATERIAL:
1
Precision
Component
303 Stainless Steel

1
2
.312
.125
3/32
SUB DRILL
#2-56 SET SCREW
O.D. P.D.
.312
.1248 +.0005
-.0000
INCH COMPONENT
Catalog Number
303 Stainless
Steel
2024 Aluminum
Anodized
S1063Z-048S014
S1063Z-048S018
S1063Z-048S020
S1063Z-048S022
S1063Z-048S024
S1063Z-048S028
S1063Z-048S030
S1063Z-048S032
S1063Z-048S034
S1063Z-048S036
S1063Z-048S038
S1063Z-048S040
S1063Z-048S042
S1063Z-048S046
S1063Z-048S048
S1063Z-048S050
S1063Z-048S056
S1063Z-048S060
S1063Z-048S064
S1063Z-048S065
S1063Z-048S070
S1063Z-048S072
S1063Z-048S080
S1063Z-048S084
S1063Z-048S085
S1063Z-048S090
S1063Z-048S096
S1063Z-048S100
S1063Z-048S102
S1063Z-048S105
S1063Z-048A014
S1063Z-048A018
S1063Z-048A020
S1063Z-048A022
S1063Z-048A024
S1063Z-048A028
S1063Z-048A030
S1063Z-048A032
S1063Z-048A034
S1063Z-048A036
S1063Z-048A038
S1063Z-048A040
S1063Z-048A042
S1063Z-048A046
S1063Z-048A048
S1063Z-048A050
S1063Z-048A056
S1063Z-048A060
S1063Z-048A064
S1063Z-048A065
S1063Z-048A070
S1063Z-048A072
S1063Z-048A080
S1063Z-048A084
S1063Z-048A085
S1063Z-048A090
S1063Z-048A096
S1063Z-048A100
S1063Z-048A102
S1063Z-048A105
No.
of
Teeth
P.D.
O.D.
14
18
20
22
24
28
30
32
34
36
38
40
42
46
48
50
56
60
64
65
70
72
80
84
85
90
96
100
102
105
.2917
.3750
.4167
.4583
.5000
.5833
.6250
.6667
.7083
.7500
.7917
.8333
.8750
.9583
1.0000
1.0417
1.1667
1.2500
1.3333
1.3542
1.4583
1.5000
1.6667
1.7500
1.7708
1.8750
2.0000
2.0833
2.1250
2.1875
.333
.417
.458
.500
.542
.625
.667
.708
.750
.792
.833
.875
.917
1.000
1.042
1.083
1.208
1.292
1.375
1.396
1.500
1.542
1.708
1.792
1.813
1.917
2.042
2.125
2.167
2.229
7
8
9
10
11
12
13
14
15
1-77
16
I
R
T
1
2
SPUR GEARS 48 PITCH

AGMA 10
1/8 FACE
3/16 BORE
20 PRESSURE ANGLE
Inch
MATERIAL:
1
Precision
Component
303 Stainless Steel

.343
.125
7/64
SUB DRILL
#4-40 SET SCREW
4
O.D.
P.D.
.375
5
.1873 +.0005
-.0000
INCH COMPONENT
Catalog Number
7
8
9
10
11
12
13
14
15
16
303 Stainless
Steel
2024 Aluminum
Anodized
S1064Z-048S020
S1064Z-048S021
S1064Z-048S022
S1064Z-048S023
S1064Z-048S024
S1064Z-048S025
S1064Z-048S026
S1064Z-048S028
S1064Z-048S030
S1064Z-048S032
S1064Z-048S034
S1064Z-048S036
S1064Z-048S040
S1064Z-048S042
S1064Z-048S044
S1064Z-048S046
S1064Z-048S048
S1064Z-048S050
S1064Z-048S060
S1064Z-048S064
S1064Z-048S070
S1064Z-048S072
S1064Z-048S080
S1064Z-048S084
S1064Z-048S090
S1064Z-048S096
S1064Z-048S100
S1064Z-048S105
S1064Z-048S110
S1064Z-048S120
S1064Z-048A020
S1064Z-048A021
S1064Z-048A022
S1064Z-048A023
S1064Z-048A024
S1064Z-048A025
S1064Z-048A026
S1064Z-048A028
S1064Z-048A030
S1064Z-048A032
S1064Z-048A034
S1064Z-048A036
S1064Z-048A040
S1064Z-048A042
S1064Z-048A044
S1064Z-048A046
S1064Z-048A048
S1064Z-048A050
S1064Z-048A060
S1064Z-048A064
S1064Z-048A070
S1064Z-048A072
S1064Z-048A080
S1064Z-048A084
S1064Z-048A090
S1064Z-048A096
S1064Z-048A100
S1064Z-048A105
S1064Z-048A110
S1064Z-048A120
No.
of
Teeth
P.D.
O.D.
20
21
22
23
24
25
26
28
30
32
34
36
40
42
44
46
48
50
60
64
70
72
80
84
90
96
100
105
110
120
.4167
.4375
.4583
.4792
.5000
.5208
.5417
.5833
.6250
.6667
.7083
.7500
.8333
.8750
.9167
.9583
1.0000
1.0417
1.2500
1.3333
1.4583
1.5000
1.6667
1.7500
1.8750
2.0000
2.0833
2.1875
2.2917
2.5000
.458
.479
.500
.521
.542
.563
.583
.625
.667
.708
.750
.792
.875
.917
.958
1.000
1.042
1.083
1.292
1.375
1.500
1.542
1.708
1.792
1.917
2.042
2.125
2.229
2.333
2.542
1-78
SPUR GEARS 48 PITCH

AGMA 10
1/8 FACE
1/4 BORE
20 PRESSURE ANGLE
R
Inch
MATERIAL:
1
Precision
Component
303 Stainless Steel

T
1

2
.375
.125
1/8
SUB DRILL
#6-32 SET SCREW
4
O.D.
P.D.
.500
5
.2498 +.0005
-.0000
INCH COMPONENT
Catalog Number
303 Stainless
Steel
2024 Aluminum
Anodized
S1066Z-048S020
S1066Z-048S023
S1066Z-048S024
S1066Z-048S025
S1066Z-048S026
S1066Z-048S027
S1066Z-048S028
S1066Z-048S029
S1066Z-048S030
S1066Z-048S032
S1066Z-048S034
S1066Z-048S035
S1066Z-048S036
S1066Z-048S038
S1066Z-048S040
S1066Z-048S042
S1066Z-048S044
S1066Z-048S045
S1066Z-048S046
S1066Z-048S048
S1066Z-048S050
S1066Z-048S054
S1066Z-048S055
S1066Z-048S056
S1066Z-048S060
S1066Z-048S064
S1066Z-048S065
S1066Z-048S070
S1066Z-048S072
S1066Z-048S075
S1066Z-048A020
S1066Z-048A023
S1066Z-048A024
S1066Z-048A025
S1066Z-048A026
S1066Z-048A027
S1066Z-048A028
S1066Z-048A029
S1066Z-048A030
S1066Z-048A032
S1066Z-048A034
S1066Z-048A035
S1066Z-048A036
S1066Z-048A038
S1066Z-048A040
S1066Z-048A042
S1066Z-048A044
S1066Z-048A045
S1066Z-048A046
S1066Z-048A048
S1066Z-048A050
S1066Z-048A054
S1066Z-048A055
S1066Z-048A056
S1066Z-048A060
S1066Z-048A064
S1066Z-048A065
S1066Z-048A070
S1066Z-048A072
S1066Z-048A075
No.
of
Teeth
P.D.
O.D.
20
23
24
25
26
27
28
29
30
32
34
35
36
38
40
42
44
45
46
48
50
54
55
56
60
64
65
70
72
75
.4167
.4792
.5000
.5208
.5417
.5625
.5833
.6042
.6250
.6667
.7083
.7292
.7500
.7917
.8333
.8750
.9167
.9375
.9583
1.0000
1.0417
1.1250
1.1458
1.1667
1.2500
1.3333
1.3542
1.4583
1.5000
1.5625
.458
.521
.542
.563
.583
.604
.625
.646
.667
.708
.750
.771
.792
.833
.875
.917
.958
.979
1.000
1.042
1.083
1.167
1.188
1.208
1.292
1.375
1.396
1.500
1.542
1.604
1-79
7
8
9
10
11
12
13
14
15
16
I
R
T
1
2
SPUR GEARS 48 PITCH

AGMA 10
1/8 FACE
1/4 BORE
20 PRESSURE ANGLE
Inch
MATERIAL:
1
Precision
Component
303 Stainless Steel

.375
.125
1/8
SUB DRILL
#6-32 SET SCREW
4
O.D.
P.D.
.500
5
.2498 +.0005
-.0000
INCH COMPONENT
Catalog Number
7
8
9
10
11
12
13
14
15
16
303 Stainless
Steel
2024 Aluminum
Anodized
S1066Z-048S078
S1066Z-048S080
S1066Z-048S084
S1066Z-048S085
S1066Z-048S090
S1066Z-048S092
S1066Z-048S095
S1066Z-048S096
S1066Z-048S100
S1066Z-048S105
S1066Z-048S108
S1066Z-048S110
S1066Z-048S115
S1066Z-048S120
S1066Z-048S126
S1066Z-048S130
S1066Z-048S132
S1066Z-048S140
S1066Z-048S144
S1066Z-048S145
S1066Z-048S150
S1066Z-048S156
S1066Z-048S160
S1066Z-048S168
S1066Z-048S170
S1066Z-048S174
S1066Z-048S180
S1066Z-048S185
S1066Z-048S192
S1066Z-048S198
S1066Z-048A078
S1066Z-048A080
S1066Z-048A084
S1066Z-048A085
S1066Z-048A090
S1066Z-048A092
S1066Z-048A095
S1066Z-048A096
S1066Z-048A100
S1066Z-048A105
S1066Z-048A108
S1066Z-048A110
S1066Z-048A115
S1066Z-048A120
S1066Z-048A126
S1066Z-048A130
S1066Z-048A132
S1066Z-048A140
S1066Z-048A144
S1066Z-048A145
S1066Z-048A150
S1066Z-048A156
S1066Z-048A160
S1066Z-048A168
S1066Z-048A170
S1066Z-048A174
S1066Z-048A180
S1066Z-048A185
S1066Z-048A192
S1066Z-048A198
No.
of
Teeth
P.D.
O.D.
78
80
84
85
90
92
95
96
100
105
108
110
115
120
126
130
132
140
144
145
150
156
160
168
170
174
180
185
192
198
1.6250
1.6667
1.7500
1.7708
1.8750
1.9167
1.9792
2.0000
2.0833
2.1875
2.2500
2.2917
2.3958
2.5000
2.6250
2.7083
2.7500
2.9167
3.0000
3.0208
3.1250
3.2500
3.3333
3.5000
3.5417
3.6250
3.7500
3.8542
4.0000
4.1250
1.667
1.708
1.792
1.813
1.917
1.958
2.021
2.042
2.125
2.229
2.292
2.333
2.438
2.542
2.667
2.750
2.792
2.958
3.042
3.063
3.167
3.292
3.375
3.542
3.583
3.667
3.792
3.896
4.042
4.167
1-80
SPUR GEARS 48 PITCH

AGMA 10
3/16 FACE
3/16 BORE
20 PRESSURE ANGLE
R
Inch
MATERIAL:
1
Precision
Component
303 Stainless Steel

T
1

2
.406
.187
7/64
SUB DRILL
#4-40 SET SCREW
4
O.D.
P.D.
.375
5
.1873 +.0005
-.0000
INCH COMPONENT
Catalog Number
303 Stainless
Steel
2024 Aluminum
Anodized
S1084Z-048S017
S1084Z-048S018
S1084Z-048S020
S1084Z-048S021
S1084Z-048S022
S1084Z-048S024
S1084Z-048S025
S1084Z-048S026
S1084Z-048S028
S1084Z-048S030
S1084Z-048S032
S1084Z-048S036
S1084Z-048S040
S1084Z-048S048
S1084Z-048S050
S1084Z-048S056
S1084Z-048S060
S1084Z-048S064
S1084Z-048S065
S1084Z-048S072
S1084Z-048S084
S1084Z-048S090
S1084Z-048S092
S1084Z-048S096
S1084Z-048S100
S1084Z-048S120
S1084Z-048S144
S1084Z-048S156
S1084Z-048S180
S1084Z-048S198
S1084Z-048A017
S1084Z-048A018
S1084Z-048A020
S1084Z-048A021
S1084Z-048A022
S1084Z-048A024
S1084Z-048A025
S1084Z-048A026
S1084Z-048A028
S1084Z-048A030
S1084Z-048A032
S1084Z-048A036
S1084Z-048A040
S1084Z-048A048
S1084Z-048A050
S1084Z-048A056
S1084Z-048A060
S1084Z-048A064
S1084Z-048A065
S1084Z-048A072
S1084Z-048A084
S1084Z-048A090
S1084Z-048A092
S1084Z-048A096
S1084Z-048A100
S1084Z-048A120
S1084Z-048A144
S1084Z-048A156
S1084Z-048A180
S1084Z-048A198
No.
of
Teeth
P.D.
O.D.
17
18
20
21
22
24
25
26
28
30
32
36
40
48
50
56
60
64
65
72
84
90
92
96
100
120
144
156
180
198
.3542
.3750
.4167
.4375
.4583
.5000
.5208
.5417
.5833
.6250
.6667
.7500
.8333
1.0000
1.0417
1.1667
1.2500
1.3333
1.3542
1.5000
1.7500
1.8750
1.9167
2.0000
2.0833
2.5000
3.0000
3.2500
3.7500
4.1250
.396
.417
.458
.479
.500
.542
.563
.583
.625
.667
.708
.792
.875
1.042
1.083
1.208
1.292
1.375
1.396
1.542
1.792
1.917
1.958
2.042
2.125
2.542
3.042
3.292
3.792
4.167
1-81
7
8
9
10
11
12
13
14
15
16
I
R
T
1
2
SPUR GEARS 48 PITCH

AGMA 10
3/16 FACE
1/4 BORE
20 PRESSURE ANGLE
Inch
MATERIAL:
1
Precision
Component
303 Stainless Steel

.437
.187
1/8
SUB DRILL
#6-32 SET SCREW
O.D.
P.D.
.500
5
6
7
8
9
10
11
12
13
14
15
16
.2498 +.0005
-.0000
INCH COMPONENT
Catalog Number
303 Stainless
Steel
2024 Aluminum
Anodized
S1086Z-048S020
S1086Z-048S021
S1086Z-048S022
S1086Z-048S023
S1086Z-048S024
S1086Z-048S025
S1086Z-048S026
S1086Z-048S027
S1086Z-048S028
S1086Z-048S029
S1086Z-048S030
S1086Z-048S031
S1086Z-048S032
S1086Z-048S033
S1086Z-048S034
S1086Z-048S035
S1086Z-048S036
S1086Z-048S038
S1086Z-048S040
S1086Z-048S042
S1086Z-048S044
S1086Z-048S045
S1086Z-048S046
S1086Z-048S048
S1086Z-048S050
S1086Z-048S052
S1086Z-048S054
S1086Z-048S055
S1086Z-048S056
S1086Z-048S057
S1086Z-048A020
S1086Z-048A021
S1086Z-048A022
S1086Z-048A023
S1086Z-048A024
S1086Z-048A025
S1086Z-048A026
S1086Z-048A027
S1086Z-048A028
S1086Z-048A029
S1086Z-048A030
S1086Z-048A031
S1086Z-048A032
S1086Z-048A033
S1086Z-048A034
S1086Z-048A035
S1086Z-048A036
S1086Z-048A038
S1086Z-048A040
S1086Z-048A042
S1086Z-048A044
S1086Z-048A045
S1086Z-048A046
S1086Z-048A048
S1086Z-048A050
S1086Z-048A052
S1086Z-048A054
S1086Z-048A055
S1086Z-048A056
S1086Z-048A057
No.
of
Teeth
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
38
40
42
44
45
46
48
50
52
54
55
56
57
1-82
P.D.
O.D.
.4167
.4375
.4583
.4792
.5000
.5208
.5417
.5625
.5833
.6042
.6250
.6458
.6667
.6875
.7083
.7292
.7500
.7917
.8333
.8750
.9167
.9375
.9583
1.0000
1.0417
1.0833
1.1250
1.1458
1.1667
1.1875
.458
.479
.500
.521
.542
.563
.583
.604
.625
.646
.667
.688
.708
.729
.750
.771
.792
.833
.875
.917
.958
.979
1.000
1.042
1.083
1.125
1.167
1.188
1.208
1.229
SPUR GEARS 48 PITCH

AGMA 10
3/16 FACE
1/4 BORE
20 PRESSURE ANGLE
R
Inch
MATERIAL:
1
Precision
Component
303 Stainless Steel

T
1

.437
.187
1/8
SUB DRILL
#6-32 SET SCREW
O.D.
P.D.
.500
.2498 +.0005
-.0000
INCH COMPONENT
Catalog Number
303 Stainless
Steel
2024 Aluminum
Anodized
S1086Z-048S058
S1086Z-048S060
S1086Z-048S062
S1086Z-048S064
S1086Z-048S065
S1086Z-048S068
S1086Z-048S070
S1086Z-048S072
S1086Z-048S075
S1086Z-048S080
S1086Z-048S084
S1086Z-048S085
S1086Z-048S090
S1086Z-048S095
S1086Z-048S096
S1086Z-048S100
S1086Z-048S105
S1086Z-048S108
S1086Z-048S110
S1086Z-048S120
S1086Z-048S128
S1086Z-048S130
S1086Z-048S140
S1086Z-048S150
S1086Z-048S160
S1086Z-048S168
S1086Z-048S170
S1086Z-048S180
S1086Z-048S192
S1086Z-048S198
S1086Z-048A058
S1086Z-048A060
S1086Z-048A062
S1086Z-048A064
S1086Z-048A065
S1086Z-048A068
S1086Z-048A070
S1086Z-048A072
S1086Z-048A075
S1086Z-048A080
S1086Z-048A084
S1086Z-048A085
S1086Z-048A090
S1086Z-048A095
S1086Z-048A096
S1086Z-048A100
S1086Z-048A105
S1086Z-048A108
S1086Z-048A110
S1086Z-048A120
S1086Z-048A128
S1086Z-048A130
S1086Z-048A140
S1086Z-048A150
S1086Z-048A160
S1086Z-048A168
S1086Z-048A170
S1086Z-048A180
S1086Z-048A192
S1086Z-048A198
6
No.
of
Teeth
P.D.
O.D.
58
60
62
64
65
68
70
72
75
80
84
85
90
95
96
100
105
108
110
120
128
130
140
150
160
168
170
180
192
198
1.2083
1.2500
1.2917
1.3333
1.3542
1.4167
1.4583
1.5000
1.5625
1.6667
1.7500
1.7708
1.8750
1.9792
2.0000
2.0833
2.1875
2.2500
2.2917
2.5000
2.6667
2.7083
2.9167
3.1250
3.3333
3.5000
3.5417
3.7500
4.0000
4.1250
1.250
1.292
1.333
1.375
1.396
1.458
1.500
1.542
1.604
1.708
1.792
1.813
1.917
2.021
2.042
2.125
2.229
2.292
2.333
2.542
2.708
2.750
2.958
3.167
3.375
3.542
3.583
3.792
4.042
4.167
1-83
7
8
9
10
11
12
13
14
15
16
I
R

AGMA 10
3/16 FACE
3/16 & 1/4 BORE
20 PRESSURE ANGLE
MATERIAL:
SPECIFICATIONS:
2
3
4
5
6
7
8
Inch

B Bore Ref.
C
E
.1873
.438
.453
.2498
.530
.483

B +.0005
-.0000

pin type hubs.
P.D. O.D.
#2-56
CAP SCREW
INCH COMPONENT
CATALOG NUMBER
S1V8 Z-048DS
No. of
Teeth
Code
Bore Code B Bore
.1873
4
.2498
6
10
11
12
13
14
15
1-84
1
Precision
Component
Gear - Acetal
16
.187
No. of
Teeth Code
No. of
Teeth
P.D.
O.D.
028
029
030
032
034
036
038
040
042
044
046
048
050
055
056
060
064
068
072
075
080
084
090
092
096
100
110
120
132
138
144
156
168
180
186
28
29
30
32
34
36
38
40
42
44
46
48
50
55
56
60
64
68
72
75
80
84
90
92
96
100
110
120
132
138
144
156
168
180
186
.5833
.6042
.6250
.6667
.7083
.7500
.7917
.8333
.8750
.9167
.9583
1.0000
1.0417
1.1458
1.1667
1.2500
1.3333
1.4167
1.5000
1.5625
1.6667
1.7500
1.8750
1.9167
2.0000
2.0833
2.2917
2.5000
2.7500
2.8750
3.0000
3.2500
3.5000
3.7500
3.8750
.625
.646
.667
.708
.750
.792
.833
.875
.917
.958
1.000
1.042
1.083
1.188
1.208
1.292
1.375
1.458
1.542
1.604
1.708
1.792
1.917
1.958
2.042
2.125
2.333
2.542
2.792
2.917
3.042
3.292
3.542
3.792
3.917

AGMA 10
3/16 FACE
3/8 BORE
20 PRESSURE ANGLE
R
Inch
MATERIAL:
1
Precision
Component
Acetal


O.D. P.D.
.3750 +.0005
-.0000
4
5
.187
INCH COMPONENT
CATALOG NUMBER
S1288Z-048D
No. of
Teeth
Code
No. of
Teeth Code
No. of
Teeth
P.D.
O.D.
028
029
030
032
034
036
038
040
042
044
046
048
050
055
056
060
064
068
072
075
080
084
090
092
096
100
110
120
132
138
144
156
168
180
186
28
29
30
32
34
36
38
40
42
44
46
48
50
55
56
60
64
68
72
75
80
84
90
92
96
100
110
120
132
138
144
156
168
180
186
.5833
.6042
.6250
.6667
.7083
.7500
.7917
.8333
.8750
.9167
.9583
1.0000
1.0417
1.1458
1.1667
1.2500
1.3333
1.4167
1.5000
1.5625
1.6667
1.7500
1.8750
1.9167
2.0000
2.0833
2.2917
2.5000
2.7500
2.8750
3.0000
3.2500
3.5000
3.7500
3.8750
.625
.646
.667
.708
.750
.792
.833
.875
.917
.958
1.000
1.042
1.083
1.188
1.208
1.292
1.375
1.458
1.542
1.604
1.708
1.792
1.917
1.958
2.042
2.125
2.333
2.542
2.792
2.917
3.042
3.292
3.542
3.792
3.917
6
7
8
9
10
11
12
13
14
15
1-85
16
I
R
T
1
2

AGMA 10
3/16 FACE
3/16 & 1/4 BORE
20 PRESSURE ANGLE
Inch
MATERIAL:
Gear - Acetal
Fairloc hubs.
.437
1/8
3
.500
INCH COMPONENT
CATALOG NUMBER
S108 Z-048DS
No. of
Teeth
Code
Bore Code B Bore
.1873
4
.2498
6
9
10
11
12
13
14
15
16
P.D. O.D.
SUB DRILL
7
8
+.0005
B -.0000
#6-32 SET SCREW
5
6
1-86
1
Precision
Component
.187
No. of
Teeth Code
No. of
Teeth
P.D.
O.D.
028
029
030
032
034
036
038
040
042
044
046
048
050
055
056
060
064
068
072
075
080
084
090
092
096
100
110
120
132
138
144
156
168
180
186
28
29
30
32
34
36
38
40
42
44
46
48
50
55
56
60
64
68
72
75
80
84
90
92
96
100
110
120
132
138
144
156
168
180
186
.5833
.6042
.6250
.6667
.7083
.7500
.7917
.8333
.8750
.9167
.9583
1.0000
1.0417
1.1458
1.1667
1.2500
1.3333
1.4167
1.5000
1.5625
1.6667
1.7500
1.8750
1.9167
2.0000
2.0833
2.2917
2.5000
2.7500
2.8750
3.0000
3.2500
3.5000
3.7500
3.8750
.625
.646
.667
.708
.750
.792
.833
.875
.917
.958
1.000
1.042
1.083
1.188
1.208
1.292
1.375
1.458
1.542
1.604
1.708
1.792
1.917
1.958
2.042
2.125
2.333
2.542
2.792
2.917
3.042
3.292
3.542
3.792
3.917
SPUR GEARS 48 PITCH

1/8 FACE WIDTH
14-1/2 PRESSURE ANGLE
R
Inch
MATERIAL:
Brass
Gears other than standard stock sizes

are available on special order.
T
1
2
1/8
B +.0010
-.0000
O.D. P.D.
5
E
INCH COMPONENT
Catalog Number
No.
of
Teeth
P.D.
B Bore .2500
1.000
48
A 1B 2-N48048
52
1.083
A 1B 2-N48052
1.125
54
A 1B 2-N48054
1.167
56
A 1B 2-N48056
1.250
60
A 1B 2-N48060
1.333
64
A 1B 2-N48064
1.375
66
A 1B 2-N48066
1.500
72
A 1B 2-N48072
1.667
80
A 1B 2-N48080
84
1.750
A 1B 2-N48084
2.000
96
A 1B 2-N48096
2.000
96
A 1B 2-N48096A
B Bore .3125
2.083
100
A 1B 2-N48100
108
2.250
A 1B 2-N48108
120
2.500
A 1B 2-N48120
2.667
128
A 1B 2-N48128
2.750
132
A 1B 2-N48132
3.000
144
A 1B 2-N48144
* A 1B 2-N48156A
3.250
156
3.500
168
A 1B 2-N48168
* A 1B 2-N48180A
180
3.750
O.D.
E
Length
C
Hub
Dia.
D
Hub
Proj.
Type
1.042
1.125
1.167
1.208
1.292
1.375
1.417
1.542
1.708
1.792
2.042
2.042
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
5/8
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
Plain
Plain
Plain
Plain
Plain
Plain
Plain
Plain
Plain
Plain
Plain
Plain
2.125
2.292
2.542
2.708
2.792
3.042
3.292
3.542
3.792
7/16
7/16
7/16
7/16
7/16
7/16
7/16
7/16
7/16
5/8
5/8
5/8
5/8
5/8
5/8
11/16
3/4
11/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
Plain
Plain
Plain
Plain
Plain
Plain
Spoked
Plain
Spoked
7
8
9
10
11
12
13
14
15
1-87
REV: 07.06.12 mh
16
I
R
T
1
NONMETALLIC SPUR GEARS 48 PITCH

AGMA 8
1/8 FACE
20 PRESSURE ANGLE
Inch
MATERIAL:
Gear - Acetal
Insert - Brass
SPECIFICATION:
Gears under 60 teeth have no webs
Gears with:
2
3

.125
#2-56
.1875
#4-40
.250
#6-32
3/8
1/8
SUB DRILL
SET SCREW
O.D. P.D.
5
6
+.001
INCH COMPONENT
CATALOG NUMBER
A 1P 2-Y48
No. of
Teeth
Code
10
11
12
13
14
BORE CODE
A .125 Dia.
C .250 Dia.
No.
No. of
of
Teeth Code Teeth
028
029
030
031
032
033
034
035
036
037
038
039
040
042
044
045
046
048
050
052
15
16
1/8
B .1875 Dia.
8
9
BORE -.000
1-88
28
29
30
31
32
33
34
35
36
37
38
39
40
42
44
45
46
48
50
52
P.D.
O.D.
C
Hub
Dia.
.583
.604
.625
.646
.667
.688
.708
.729
.750
.771
.792
.813
.833
.875
.917
.938
.958
1.000
1.042
1.083
.625
.646
.667
.688
.708
.729
.750
.771
.792
.813
.833
.854
.875
.917
.958
.979
1.000
1.042
1.083
1.125
33/64
33/64
33/64
33/64
33/64
33/64
33/64
33/64
33/64
33/64
33/64
33/64
33/64
33/64
33/64
33/64
33/64
5/8
5/8
5/8
No.
No. of
of
Teeth Code Teeth
054
055
056
058
060
064
066
068
072
075
080
084
090
092
096
100
108
110
120
130
54
55
56
58
60
64
66
68
72
75
80
84
90
92
96
100
108
110
120
130
P.D.
O.D.
C
Hub
Dia.
1.125
1.146
1.167
1.208
1.250
1.333
1.375
1.417
1.500
1.563
1.667
1.750
1.875
1.917
2.000
2.083
2.250
2.292
2.500
2.708
1.167
1.188
1.208
1.250
1.292
1.375
1.417
1.458
1.542
1.604
1.708
1.792
1.917
1.958
2.042
2.125
2.292
2.333
2.542
2.750
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
D810
D790
D787
D190
P1-89
P1-83
P1-79
P65
A 1T 2--X
P1 of 3
2-22-89
REV: 7.10.12 JF
MOLDED SPUR GEARS 48 PITCH

1/8 FACE
20 PRESSURE ANGLE
3/8
MATERIAL:
Inch
1/4
1/8
Gear - Acetal
Insert - Brass
SUB DRILL
SET SCREW
O.D. P.D.
B +.001
-.000
1/8
INCH COMPONENT
Catalog Number
A 1T 2-Y48018
A 1T 2-Y48019
A 1T 2-Y48020
A 1T 2-Y48021
A 1T 2-Y48022
A 1T 2-Y48023
A 1T 2-Y48024
A 1T 2-Y48025
A 1T 2-Y48026
A 1T 2-Y48027
A 1T 2-Y48028
A 1T 2-Y48029
A 1T 2-Y48030
A 1T 2-Y48031
A 1T 2-Y48032
A 1T 2-Y48033
A 1T 2-Y48034
A 1T 2-Y48035
A 1T 2-Y48036
A 1T 2-Y48037
A 1T 2-Y48038
A 1T 2-Y48039
A 1T 2-Y48040
A 1T 2-Y48040S
A 1T 2-Y48042
A 1T 2-Y48044
A 1T 2-Y48045
A 1T 2-Y48048
A 1T 2-Y48052
A 1T 2-Y48054
A 1T 2-Y48056
* A 1T 2-Y48056S
A 1T 2-Y48060
A 1T 2-Y48064
A 1T 2-Y48066
A 1T 2-Y48072
A 1T 2-Y48080
A 1T 2-Y48084
A 1T 2-Y48096
A 1T 2-Y48100
A 1T 2-Y48108
A 1T 2-Y48120
*Has 2 set screws
REV: 07.18.12 mh
No.
of
Teeth
P.D.
+.000
-.010
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
40
42
44
45
48
52
54
56
56
60
64
66
72
80
84
96
100
108
120
.375
.396
.417
.438
.458
.479
.500
.521
.542
.563
.583
.604
.625
.646
.667
.688
.708
.729
.750
.771
.792
.813
.833
.833
.875
.917
.938
1.000
1.083
1.125
1.167
1.167
1.250
1.333
1.375
1.500
1.667
1.750
2.000
2.083
2.250
2.500
.417
.438
.458
.479
.500
.521
.542
.563
.583
.604
.625
.646
.667
.688
.708
.729
.750
.771
.792
.813
.833
.854
.875
.875
.917
.958
.979
1.042
1.125
1.167
1.208
1.208
1.292
1.375
1.417
1.542
1.708
1.792
2.042
2.125
2.292
2.542
O.D.
B
Bore
+.0010
-.0000
.1250
.1250
.1250
.1250
.1250
.1250
.1250
.1250
.1875
.1875
.1875
.1875
.1875
.1875
.1875
.1875
.1875
.1875
.1875
.1875
.1875
.1875
.1875
.2500
.1875
.1875
.1875
.2500
.2500
.2500
.2500
.2500
.2500
.2500
.2500
.2500
.2500
.2500
.2500
.2500
.2500
.2500
C
Hub
Dia.
Set
Screw
Type
5/16
5/16
11/32
11/32
3/8
3/8
13/32
13/32
29/64
29/64
31/64
31/64
1/2
35/64
35/64
35/64
35/64
35/64
35/64
35/64
35/64
35/64
35/64
35/64
35/64
35/64
35/64
39/64
39/64
39/64
39/64
39/64
39/64
39/64
39/64
39/64
39/64
39/64
39/64
39/64
39/64
39/64
#2-56
#2-56
#2-56
#2-56
#2-56
#2-56
#2-56
#2-56
#4-40
#4-40
#4-40
#4-40
#4-40
#4-40
#4-40
#4-40
#4-40
#4-40
#4-40
#4-40
#4-40
#4-40
#4-40
#6-32
#4-40
#4-40
#4-40
#6-32
#6-32
#6-32
#6-32
#6-32
#6-32
#6-32
#6-32
#6-32
#6-32
#6-32
#6-32
#6-32
#6-32
#6-32
Plain
Plain
Plain
Plain
Plain
Plain
Plain
Plain
Plain
Plain
Plain
Plain
Plain
Plain
Plain
Plain
Plain
Plain
Plain
Plain
Plain
Plain
Plain
Plain
Plain
Plain
Plain
Plain
Web
Web
Web
Web
Web
Web
Web
Web
Web
Web
Web
Web
Web
Web
1-89
4
5
6
7
8
9
10
11
12
13
14
15
16
I
R

AGMA 9
20 PRESSURE ANGLE
Inch
MATERIAL:
Acetal
COLOR:
Black
TRUE ANGLE
OPERATING TEMPERATURE:
-40F to 180F
2
3
Tooth profile and pressure angle

of these gears are the same as metal
gears that are manufactured by hobbing
and shaping methods.
P.D. B**
C D O.D.
5
1/8 FACE
PRECISION MOLDED TO AGMA 9 QUALITY
6
INCH COMPONENT
7
8
9
10
11
12
13
14
Catalog Number
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
1M
1M
1M
1M
1M
1M
1M
1M
1M
1M
1M
1M
1M
1M
1M
1M
1M
1M
1M
1M
1M
1M
1M
+.000
-.010
+.000
-.010
O.D.
B**
Bore
Nom.
C
Hub
Dia.
D
Dia.
E
Length
10
12
14
15
16
18
20
22
24
26
30
32
36
40
44
48
54
60
66
72
84
96
100
.2083
.2500
.2917
.3125
.3333
.3750
.4167
.4583
.5000
.5417
.6250
.6667
.7500
.8333
.9167
1.0000
1.1250
1.2500
1.3750
1.5000
1.7500
2.0000
2.0833
.250
.292
.333
.354
.375
.417
.458
.500
.542
.583
.667
.708
.792
.875
.958
1.042
1.166
1.292
1.417
1.542
1.792
2.042
2.125
3/32
1/8
1/8
1/8
1/8
3/16
3/16
3/16
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
.152
.194
.235
.250
.250
.312
.312
.312
.375
.375
.375
.375
.375
.375
.375
.437
.437
.437
.437
.437
.437
.437
.437
Solid
Solid
Solid
Solid
Solid
Solid
Solid
Solid
Solid
Solid
.477
.518
.602
.685
.768
.852
.976
1.102
1.226
1.352
1.602
1.852
1.935
Solid
Solid
Solid
Solid
Solid
Solid
Solid
Solid
Solid
Solid
.081
.081
.081
.081
.081
.081
.081
.081
.081
.081
.081
.081
.081
.312
.312
.312
.312
.312
.312
.312
.312
.312
.312
.312
.312
.312
.312
.312
.375
.375
.375
.375
.375
.375
.375
.375
**BORE is for press fit on shaft size indicated.
15
16
2-TA48010
2-TA48012
2-TA48014
2-TA48015
2-TA48016
2-TA48018
2-TA48020
2-TA48022
2-TA48024
2-TA48026
2-TA48030
2-TA48032
2-TA48036
2-TA48040
2-TA48044
2-TA48048
2-TA48054
2-TA48060
2-TA48066
2-TA48072
2-TA48084
2-TA48096
2-TA48100
No.
of
Teeth
1-90
P.D.

1/8 FACE
20 PRESSURE ANGLE
MATERIAL:
Inch
Acetal
3/8
T
1
O.D. P.D.
2
3
1/4
1/8
INCH COMPONENT
Catalog Number
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
1M
1M
1M
1M
1M
1M
1M
1M
1M
1M
1M
1M
1M
1M
1M
1M
1M
1M
1M
1M
1M
1M
1M
1M
1M
1M
1M
1M
1M
1M
1M
1M
1M
1M
1M
1M
1M
1M
1M
1M
2-Y48018
2-Y48019
2-Y48020
2-Y48021
2-Y48022
2-Y48023
2-Y48024
2-Y48025
2-Y48026
2-Y48027
2-Y48028
2-Y48029
2-Y48030
2-Y48031
2-Y48032
2-Y48033
2-Y48034
2-Y48035
2-Y48036
2-Y48037
2-Y48038
2-Y48039
2-Y48040
2-Y48042
2-Y48044
2-Y48045
2-Y48048
2-Y48052
2-Y48054
2-Y48056
2-Y48060
2-Y48064
2-Y48066
2-Y48072
2-Y48080
2-Y48084
2-Y48096
2-Y48100
2-Y48108
2-Y48120
No.
of
Teeth
P.D.
O.D.
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
42
44
45
48
52
54
56
60
64
66
72
80
84
96
100
108
120
.375
.396
.417
.438
.458
.479
.500
.521
.542
.563
.583
.604
.625
.646
.667
.688
.708
.729
.750
.771
.792
.813
.833
.875
.917
.938
1.000
1.083
1.125
1.167
1.250
1.333
1.375
1.500
1.667
1.750
2.000
2.083
2.250
2.500
.417
.438
.458
.479
.500
.521
.542
.563
.583
.604
.625
.646
.667
.688
.708
.729
.750
.771
.792
.813
.833
.854
.875
.917
.958
.979
1.042
1.125
1.167
1.208
1.292
1.375
1.417
1.542
1.708
1.792
2.042
2.125
2.292
2.542
B
Bore
+.0010
-.0020
.1562
.1562
.1562
.1562
.1562
.1562
.1562
.1562
.1562
.1562
.1562
.1562
.1562
.1875
.1875
.1875
.1875
.1875
.1875
.1875
.1875
.1875
.1875
.1875
.1875
.1875
.2500
.2500
.2500
.2500
.2500
.2500
.2500
.2500
.2500
.2500
.2500
.2500
.2500
.2500
C
Hub
Dia.
Type
5/16
5/16
11/32
11/32
3/8
3/8
13/32
13/32
29/64
29/64
31/64
31/64
1/2
35/64
35/64
35/64
35/64
35/64
35/64
35/64
35/64
35/64
35/64
35/64
35/64
35/64
39/64
39/64
39/64
39/64
39/64
39/64
39/64
39/64
39/64
39/64
39/64
39/64
39/64
39/64
Plain
Plain
Plain
Plain
Plain
Plain
Plain
Plain
Plain
Plain
Plain
Plain
Plain
Plain
Plain
Plain
Plain
Plain
Plain
Plain
Plain
Plain
Plain
Plain
Plain
Plain
Web
Web
Web
Web
Web
Web
Web
Web
Web
Web
Web
Web
Web
Web
1-91
REV: 07.11.12 mh
5
6
7
8
9
10
11
12
13
14
15
16
I
R

1/8 FACE
Inch
MATERIAL:
T
1
Nylon 101
For engineering assistance for

all SDP components, call on our
applications engineers.
Discounts available for large
quantity orders.
2
3
O.D. P.D.
4
5
D
1/8
6
INCH COMPONENT
7
8
9
10
11
12
Catalog Number
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
1N
1N
1N
1N
1N
1N
1N
1N
1N
1N
1N
1N
1N
1N
1N
1N
1N
1N
1N
13
14
15
16
1-92
2-N48012
2-N48014
2-N48016
2-N48018
2-N48020
2-N48024
2-N48028
2-N48032
2-N48036
2-N48040
2-N48042
2-N48044
2-N48048
2-N48056
2-N48060
2-N48064
2-N48072
2-N48080
2-N48096
No.
of
Teeth
P.D.
O.D.
Ref.
B
Bore
C
Hub
Dia.
D
Hub
Proj.
12
14
16
18
20
24
28
32
36
40
42
44
48
56
60
64
72
80
96
.250
.292
.333
.375
.417
.500
.583
.667
.750
.833
.875
.917
1.000
1.167
1.250
1.333
1.500
1.667
2.000
.29
.33
.37
.41
.45
.54
.62
.70
.79
.87
.91
.95
1.04
1.20
1.29
1.37
1.54
1.70
2.04
3/32
3/32
1/8
1/8
1/8
1/8
1/8
1/8
3/16
3/16
1/4
1/8
3/16
3/16
1/4
1/4
1/4
1/4
1/4
3/16
1/4
1/4
5/16
3/8
3/8
1/2
1/2
5/8
5/8
7/16
9/32
5/8
5/8
5/8
5/8
5/8
5/8
1
3/16
3/16
3/16
3/16
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/8
1/4
1/4
1/4
1/4
1/4
1/4
1/4

AGMA 10
1/8 FACE
3/16 BORE
20 PRESSURE ANGLE
R
Inch
MATERIAL:
1
Precision
Component
303 Stainless Steel

T
1

.406
.125
.250
.1873 +.0005
-.0000
.250 +.000
-.003
O.D.
P.D.
5/16
5
FOR CLAMPS
SEE INDEX
INCH COMPONENT
Catalog Number
303 Stainless
Steel
2024 Aluminum
Anodized
S1164Z-048S017
S1164Z-048S018
S1164Z-048S019
S1164Z-048S020
S1164Z-048S021
S1164Z-048S022
S1164Z-048S024
S1164Z-048S026
S1164Z-048S027
S1164Z-048S028
S1164Z-048S030
S1164Z-048S032
S1164Z-048S036
S1164Z-048S040
S1164Z-048S042
S1164Z-048S046
S1164Z-048S048
S1164Z-048S050
S1164Z-048S052
S1164Z-048S056
S1164Z-048S060
S1164Z-048S064
S1164Z-048S066
S1164Z-048S070
S1164Z-048S072
S1164Z-048S076
S1164Z-048S080
S1164Z-048S084
S1164Z-048S088
S1164Z-048S090
S1164Z-048A017
S1164Z-048A018
S1164Z-048A019
S1164Z-048A020
S1164Z-048A021
S1164Z-048A022
S1164Z-048A024
S1164Z-048A026
S1164Z-048A027
S1164Z-048A028
S1164Z-048A030
S1164Z-048A032
S1164Z-048A036
S1164Z-048A040
S1164Z-048A042
S1164Z-048A046
S1164Z-048A048
S1164Z-048A050
S1164Z-048A052
S1164Z-048A056
S1164Z-048A060
S1164Z-048A064
S1164Z-048A066
S1164Z-048A070
S1164Z-048A072
S1164Z-048A076
S1164Z-048A080
S1164Z-048A084
S1164Z-048A088
S1164Z-048A090
No.
of
Teeth
P.D.
O.D.
17
18
19
20
21
22
24
26
27
28
30
32
36
40
42
46
48
50
52
56
60
64
66
70
72
76
80
84
88
90
.3542
.3750
.3958
.4167
.4375
.4583
.5000
.5417
.5625
.5833
.6250
.6667
.7500
.8333
.8750
.9583
1.0000
1.0417
1.0833
1.1667
1.2500
1.3333
1.3750
1.4583
1.5000
1.5833
1.6667
1.7500
1.8333
1.8750
.396
.417
.438
.458
.479
.500
.542
.583
.604
.625
.667
.708
.792
.875
.917
1.000
1.042
1.083
1.125
1.208
1.292
1.375
1.417
1.500
1.542
1.625
1.708
1.792
1.875
1.917
1-93
7
8
9
10
11
12
13
14
15
16
I
R
T
1
2

AGMA 10
1/8 FACE
1/4 BORE
20 PRESSURE ANGLE
Inch
MATERIAL:
1
Precision
Component
303 Stainless Steel

.406
.125
.250
.2498 +.0005
-.0000
.312 +.000
-.003
3/8
O.D. P.D.
5
FOR CLAMPS
SEE INDEX
INCH COMPONENT
Catalog Number
7
8
9
10
11
12
13
14
15
16
303 Stainless
Steel
2024 Aluminum
Anodized
S1166Z-048S020
S1166Z-048S023
S1166Z-048S024
S1166Z-048S025
S1166Z-0480S26
S1166Z-048S027
S1166Z-048S028
S1166Z-048S029
S1166Z-048S030
S1166Z-048S032
S1166Z-048S034
S1166Z-048S035
S1166Z-048S036
S1166Z-048S038
S1166Z-048S040
S1166Z-048S042
S1166Z-048S044
S1166Z-048S045
S1166Z-048S046
S1166Z-048S048
S1166Z-048S050
S1166Z-048S054
S1166Z-048S055
S1166Z-048S056
S1166Z-048S060
S1166Z-048S064
S1166Z-048S065
S1166Z-048S070
S1166Z-048S072
S1166Z-048S075
S1166Z-048A020
S1166Z-048A023
S1166Z-048A024
S1166Z-048A025
S1166Z-048A026
S1166Z-048A027
S1166Z-048A028
S1166Z-048A029
S1166Z-048A030
S1166Z-048A032
S1166Z-048A034
S1166Z-048A035
S1166Z-048A036
S1166Z-048A038
S1166Z-048A040
S1166Z-048A042
S1166Z-048A044
S1166Z-048A045
S1166Z-048A046
S1166Z-048A048
S1166Z-048A050
S1166Z-048A054
S1166Z-048A055
S1166Z-048A056
S1166Z-048A060
S1166Z-048A064
S1166Z-048A065
S1166Z-048A070
S1166Z-048A072
S1166Z-048A075
No.
of
Teeth
P.D.
O.D.
20
23
24
25
26
27
28
29
30
32
34
35
36
38
40
42
44
45
46
48
50
54
55
56
60
64
65
70
72
75
.4167
.4792
.5000
.5208
.5417
.5625
.5833
.6042
.6250
.6667
.7083
.7292
.7500
.7917
.8333
.8750
.9167
.9375
.9583
1.0000
1.0417
1.1250
1.1458
1.1667
1.2500
1.3333
1.3542
1.4583
1.5000
1.5625
.458
.521
.542
.563
.583
.604
.625
.646
.667
.708
.750
.771
.792
.833
.875
.917
.958
.979
1.000
1.042
1.083
1.167
1.188
1.208
1.292
1.375
1.396
1.500
1.542
1.604
1-94

AGMA 10
1/8 FACE
1/4 BORE
20 PRESSURE ANGLE
R
Inch
MATERIAL:
1
Precision
Component
303 Stainless Steel

1
.406
.125
.250
.2498 +.0005
-.0000
.312 +.000
-.003
3/8
O.D. P.D.
FOR CLAMPS
SEE INDEX
INCH COMPONENT
Catalog Number
303 Stainless
Steel
2024 Aluminum
Anodized
S1166Z-048S078
S1166Z-048S080
S1166Z-048S084
S1166Z-048S085
S1166Z-048S090
S1166Z-048S092
S1166Z-048S095
S1166Z-048S096
S1166Z-048S100
S1166Z-048S104
S1166Z-048S105
S1166Z-048S108
S1166Z-048S110
S1166Z-048S115
S1166Z-048S120
S1166Z-048S126
S1166Z-048S130
S1166Z-048S132
S1166Z-048S140
S1166Z-048S144
S1166Z-048S145
S1166Z-048S150
S1166Z-048S156
S1166Z-048S160
S1166Z-048S168
S1166Z-048S170
S1166Z-048S174
S1166Z-048S180
S1166Z-048S185
S1166Z-048S192
S1166Z-048S198
S1166Z-048A078
S1166Z-048A080
S1166Z-048A084
S1166Z-048A085
S1166Z-048A090
S1166Z-048A092
S1166Z-048A095
S1166Z-048A096
S1166Z-048A100
S1166Z-048A104
S1166Z-048A105
S1166Z-048A108
S1166Z-048A110
S1166Z-048A115
S1166Z-048A120
S1166Z-048A126
S1166Z-048A130
S1166Z-048A132
S1166Z-048A140
S1166Z-048A144
S1166Z-048A145
S1166Z-048A150
S1166Z-048A156
S1166Z-048A160
S1166Z-048A168
S1166Z-048A170
S1166Z-048A174
S1166Z-048A180
S1166Z-048A185
S1166Z-048A192
S1166Z-048A198
REV: 5-21-12 JC
No.
of
Teeth
P.D.
O.D.
78
80
84
85
90
92
95
96
100
104
105
108
110
115
120
126
130
132
140
144
145
150
156
160
168
170
174
180
185
192
198
1.6250
1.6667
1.7500
1.7708
1.8750
1.9167
1.9792
2.0000
2.0833
2.1667
2.1875
2.2500
2.2917
2.3958
2.5000
2.6250
2.7083
2.7500
2.9167
3.0000
3.0208
3.1250
3.2500
3.3333
3.5000
3.5417
3.6250
3.7500
3.8542
4.0000
4.1250
1.667
1.708
1.792
1.813
1.917
1.958
2.021
2.042
2.125
2.208
2.229
2.292
2.333
2.438
2.542
2.667
2.750
2.792
2.958
3.042
3.063
3.167
3.292
3.375
3.542
3.583
3.667
3.792
3.896
4.042
4.167
1-95
7
8
9
10
11
12
13
14
15
16
I
R
T
1
2
3

AGMA 10
1/8 FACE
3/8 BORE
20 PRESSURE ANGLE
Inch
MATERIAL:
1
Precision
Component
303 Stainless Steel

B
(8 PLACES)

See Index for hubs.
.3750 +.0000
-.0002
O.D. P.D. C
5
6
Catalog Number
7
8
9
10
11
12
13
14
15
16
.125
INCH COMPONENT
303 Stainless
Steel
2024 Aluminum
Anodized
S1268Z-048S029
S1268Z-048S030
S1268Z-048S032
S1268Z-048S040
S1268Z-048S044
S1268Z-048S048
S1268Z-048S050
S1268Z-048S054
S1268Z-048S060
S1268Z-048S064
S1268Z-048S065
S1268Z-048S070
S1268Z-048S072
S1268Z-048S075
S1268Z-048S080
S1268Z-048S084
S1268Z-048S090
S1268Z-048S096
S1268Z-048S100
S1268Z-048S105
S1268Z-048S110
S1268Z-048S120
S1268Z-048S130
S1268Z-048S140
S1268Z-048S144
S1268Z-048S150
S1268Z-048S180
S1268Z-048S186
S1268Z-048S192
S1268Z-048S198
S1268Z-048A029
S1268Z-048A030
S1268Z-048A032
S1268Z-048A040
S1268Z-048A044
S1268Z-048A048
S1268Z-048A050
S1268Z-048A054
S1268Z-048A060
S1268Z-048A064
S1268Z-048A065
S1268Z-048A070
S1268Z-048A072
S1268Z-048A075
S1268Z-048A080
S1268Z-048A084
S1268Z-048A090
S1268Z-048A096
S1268Z-048A100
S1268Z-048A105
S1268Z-048A110
S1268Z-048A120
S1268Z-048A130
S1268Z-048A140
S1268Z-048A144
S1268Z-048A150
S1268Z-048A180
S1268Z-048A186
S1268Z-048A192
S1268Z-048A198
1-96
No.
of
Teeth
P.D.
O.D.
B
Dia.
C
Dia.
29
30
32
40
44
48
50
54
60
64
65
70
72
75
80
84
90
96
100
105
110
120
130
140
144
150
180
186
192
198
.6042
.6250
.6667
.8333
.9167
1.0000
1.0417
1.1250
1.2500
1.3333
1.3542
1.4583
1.5000
1.5625
1.6667
1.7500
1.8750
2.0000
2.0833
2.1875
2.2917
2.5000
2.7083
2.9167
3.0000
3.1250
3.7500
3.8750
4.0000
4.1250
.646
.667
.708
.875
.958
1.042
1.083
1.167
1.292
1.375
1.396
1.500
1.542
1.604
1.708
1.792
1.917
2.042
2.125
2.229
2.333
2.542
2.750
2.958
3.042
3.167
3.792
3.917
4.042
4.167
3/8
3/8
3/8
3/8
3/8
3/8
1/2
1/2
1/2
1/2
1/2
1-3/8
1-3/8
1-3/8
1-3/4
1-3/4
1-3/4
2
2-1/4
2-1/4
2-1/4
2-1/2

AGMA 12
3/16 FACE
1-1/8 BORE
20 PRESSURE ANGLE
R
Inch
MATERIAL:
1
Precision
Component
303 Stainless Steel

T
1

be assembled, free of charge, to differentials
which are ordered at the same time.

.187
O.D.
P.D.
1.1250 +.0003
-.0000
5
6
INCH COMPONENT
Catalog Number
303 Stainless
Steel
2024 Aluminum
Anodized
S1289Z-048S069C
S1289Z-048S072C
S1289Z-048S080C
S1289Z-048S082C
S1289Z-048S086C
S1289Z-048S090C
S1289Z-048S095C
S1289Z-048S096C
S1289Z-048S100C
S1289Z-048S120C
S1289Z-048A069C
S1289Z-048A072C
S1289Z-048A080C
S1289Z-048A082C
S1289Z-048A086C
S1289Z-048A090C
S1289Z-048A095C
S1289Z-048A096C
S1289Z-048A100C
S1289Z-048A120C
No.
of
Teeth
P.D.
O.D.
69
72
80
82
86
90
95
96
100
120
1.4375
1.5000
1.6667
1.7083
1.7917
1.8750
1.9792
2.0000
2.0833
2.5000
1.4792
1.5417
1.7083
1.7500
1.8333
1.9167
2.0208
2.0417
2.1250
2.5417
7
8
9
10
11
12
13
14
15
1-97
16

1/8 FACE WIDTH
R
Inch
MATERIAL:
Brass
T
1
1/8
2
B
P.D.
O.D.
3
4
INCH COMPONENT
Catalog Number
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
1B
1B
1B
1B
1B
1B
1B
1B
1B
1B
1B
1B
1B
1B
1B
1B
1B
1B
1B
1B
1B
1-N48007
1-N48008
1-N48009
1-N48010
1-N48011
1-N48012
1-N48013
1-N48014
1-N48015
1-N48016
1-N48018
1-N48020
1-N48022
1-N48024
1-N48026
1-N48028
1-N48030
1-N48032
1-N48036
1-N48040
1-N48044
No.
of
Teeth
P.D.
O.D.
7
8
9
10
11
12
13
14
15
16
18
20
22
24
26
28
30
32
36
40
44
.146
.167
.188
.208
.229
.250
.271
.292
.313
.333
.375
.417
.458
.500
.542
.583
.625
.667
.750
.833
.917
.188
.208
.229
.250
.271
.292
.313
.333
.354
.375
.417
.458
.500
.542
.583
.625
.667
.708
.792
.875
.958
B
Bore
+.0010
-.0000
.0625
.0937
.0937
.0937
.0937
.1250
.1250
.1250
.1250
.1250
.1250
.1250
.1875
.1875
.1875
.1875
.1875
.1875
.1875
.1875
.1875
5
6
7
8
9
10
11
12
13
14
15
1-98
REV: 07.06.12 mh
16

1/16 & 1/32 FACE
3/8 BORE
R
Inch
MATERIAL:
F .010

T
1
.375 +.002
-.001
P.D. O.D.
2
3
4
INCH COMPONENT
Catalog Number *
1/16 Face Width (F)
A 1S 1-N48040
A 1S 1-N48048
A 1S 1-N48056
A 1S 1-N48058
A 1S 1-N48059
A 1S 1-N48060
A 1S 1-N48069
A 1S 1-N48070
A 1S 1-N48072
A 1S 1-N48075
A 1S 1-N48078
A 1S 1-N48080
A 1S 1-N48084
A 1S 1-N48096
A 1S 1-N48120
1/32 Face Width (F)
A 1S11-N48036
A 1S11-N48039
A 1S11-N48042
A 1S11-N48045
A 1S11-N48046
A 1S11-N48048
A 1S11-N48055
A 1S11-N48056
A 1S11-N48058
A 1S11-N48060
A 1S11-N48063
A 1S11-N48064
A 1S11-N48069
A 1S11-N48072
A 1S11-N48078
A 1S11-N48080
A 1S11-N48090
A 1S11-N48109
No.
of
Teeth
P.D.
O.D.
40
48
56
58
59
60
69
70
72
75
78
80
84
96
120
.833
1.000
1.167
1.208
1.229
1.250
1.438
1.458
1.500
1.563
1.625
1.667
1.750
2.000
2.500
.875
1.042
1.208
1.250
1.271
1.292
1.479
1.500
1.542
1.604
1.667
1.708
1.792
2.042
2.542
36
39
42
45
46
48
55
56
58
60
63
64
69
72
78
80
90
109
.750
.813
.875
.938
.958
1.000
1.146
1.167
1.208
1.250
1.313
1.333
1.438
1.500
1.625
1.667
1.875
2.271
.792
.854
.917
.979
1.000
1.042
1.188
1.208
1.250
1.292
1.354
1.375
1.479
1.542
1.667
1.708
1.917
2.313
1-99
6
7
8
9
10
11
12
13
14
15
16
I
R
T
1
2
3

1/32 FACE
3/8 BORE
20 PRESSURE ANGLE
Inch
MATERIAL:

The face of a stamped gear tooth has a
radius on the one side from the outside diameter
to slightly below the pitch diameter. In cases where
the material thickness approaches or exceeds the
tooth width at the pitch line, the face width of the tooth
at the outside diameter will be approximately 2/3
material thickness, and 80% to 90% of material at the
pitch diameter.
1/32 .010
.375 +.002
-.001
P.D. O.D.
5
6
7
8
9
INCH COMPONENT
Catalog Number *
A
A
A
A
A
A
A
1S
1S
1S
1S
1S
1S
1S
1-Y48054
1-Y48060
1-Y48061
1-Y48066
1-Y48071
1-Y48095
1-Y48101
P.D.
O.D.
54
60
61
66
71
95
101
1.125
1.250
1.271
1.375
1.479
1.979
2.104
1.167
1.292
1.313
1.417
1.521
2.021
2.146
10
11
12
13
14
15
16
No.
of
Teeth
1-100
HUBLESS COMPOSITE SPUR GEARS 48 PITCH

AGMA 9
1/4 & 3/8 FACE
3/8 & 1/2 BORE
20 PRESSURE ANGLE
R
Inch
MATERIAL:
1
Precision
Component
Gear - Cast Nylon 12 (PA12G)

Knurled Core - 303 Stainless Steel
T
1
FEATURES:
Self-lubricating
Quiet operation
Precision hobbed & machined
Integral metal core
Dimensionally stable against moisture
High torque transmission
Lightweight
Shock-absorbent
Non-corrodible
FW
3
B +.0005
-.0000
Other face widths, number of teeth, bore diameters

and Carbon Steel core available on special order.
See pages 1-9 thru 1-11 for technical data

on Power-CoreTM material.
5
6
INCH COMPONENT
CATALOG NUMBER
S12
Z-048PC
FW Face Width
No. of
Teeth
Code
.250 A
.375 C
B Bore Size
.3748
*.4998
*Only available with 64 to 192 teeth

Example:
S12A8Z-048PC096 is a .250 Face, .3748 Bore,
48 Pitch Hubless Spur Gear with 96 Teeth.
No.
No. of
of
Teeth Code Teeth
044
048
050
056
060
064
072
080
084
090
096
100
108
120
132
144
156
168
180
192
44
48
50
56
60
64
72
80
84
90
96
100
108
120
132
144
156
168
180
192
P.D.
O.D.
D
Core
Dia.
.9167
1.0000
1.0417
1.1667
1.2500
1.3333
1.5000
1.6667
1.7500
1.8750
2.0000
2.0833
2.2500
2.5000
2.7500
3.0000
3.2500
3.5000
3.7500
4.0000
.958
1.042
1.083
1.208
1.292
1.375
1.542
1.708
1.792
1.917
2.042
2.125
2.292
2.542
2.792
3.042
3.292
3.542
3.792
4.042
.630
.630
.630
.787
.787
.787
.787
.984
.984
.984
1.181
1.181
1.181
1.378
1.575
1.575
1.575
1.575
1.575
1.772
7
8
9
10
11
12
13
14
15
1-101
16
I
R
T
1
2

AGMA 10
1/8 FACE
3/8 BORE
20 PRESSURE ANGLE
Inch
MATERIAL:
1
Precision
Component

Rim - Acetal
See Index for hubs.
B
(8 PLACES)
3
4
O.D. P.D.
.3750 +.0000
-.0002
5
6
7
8
9
10
11
12
13
Catalog Number
No.
of
Teeth
P.D.
O.D.
A
Dia.
B
Dia.
C
Dia.
S1268Z-048M048
S1268Z-048M054
S1268Z-048M060
S1268Z-048M064
S1268Z-048M065
S1268Z-048M070
S1268Z-048M072
S1268Z-048M075
S1268Z-048M080
S1268Z-048M084
S1268Z-048M085
S1268Z-048M090
S1268Z-048M092
S1268Z-048M096
S1268Z-048M100
S1268Z-048M110
S1268Z-048M115
S1268Z-048M120
S1268Z-048M140
S1268Z-048M144
S1268Z-048M150
48
54
60
64
65
70
72
75
80
84
85
90
92
96
100
110
115
120
140
144
150
1.0000
1.1250
1.2500
1.3333
1.3542
1.4583
1.5000
1.5625
1.6667
1.7500
1.7708
1.8750
1.9167
2.0000
2.0833
2.2917
2.3958
2.5000
2.9167
3.0000
3.1250
1.042
1.167
1.292
1.375
1.396
1.500
1.542
1.604
1.708
1.792
1.813
1.917
1.958
2.042
2.125
2.333
2.438
2.542
2.958
3.042
3.167
5/8
7/8
7/8
1-1/8
1-1/8
1-1/8
1-1/8
1-1/8
1-3/8
1-3/8
1-3/8
1-5/8
1-5/8
1-5/8
1-7/8
1-7/8
2-1/8
2-1/8
2-5/8
2-5/8
2-7/8
7/32
7/32
7/32
5/16
5/16
3/8
3/8
3/8
3/8
3/8
13/16
13/16
13/16
1-3/32
1-3/32
1-3/8
1-3/8
1-3/4
1-3/4
1-3/4
14
15
16
.125
INCH COMPONENT
1-102
MOLDED HUBLESS SPUR GEARS 48 PITCH

1/8 FACE WIDTH
R
Inch
MATERIAL:
Nylon 101
Other bore sizes available

on special order.
T
1
2
1/8
3
B
P.D. O.D.
5
6
INCH COMPONENT
Catalog Number
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
1N
1N
1N
1N
1N
1N
1N
1N
1N
1N
1N
1N
1N
1N
1N
1N
1-N48012
1-N48014
1-N48016
1-N48018
1-N48020
1-N48024
1-N48028
1-N48032
1-N48036
1-N48040
1-N48048
1-N48056
1-N48060
1-N48064
1-N48072
1-N48080
No.
of
Teeth
P.D.
O.D.
Ref.
B
Bore
12
14
16
18
20
24
28
32
36
40
48
56
60
64
72
80
.250
.292
.333
.375
.417
.500
.583
.667
.750
.833
1.000
1.167
1.250
1.333
1.500
1.667
.29
.33
.38
.42
.46
.54
.63
.71
.79
.88
1.04
1.21
1.29
1.38
1.54
1.71
3/32
3/32
1/8
1/8
1/8
1/8
1/8
1/8
3/16
3/16
3/16
3/16
1/4
1/4
1/4
1/4
7
8
9
10
11
12
13
14
15
1-103
16
I
R
T

AGMA 10
20 PRESSURE ANGLE
Inch
MATERIAL:
303 Stainless Steel
1
Precision
Component
SPECIFICATIONS:
1
2

E
E
B P.D. O.D.
11
12
13
14
B
Bore
C
Dia.
Hub
Clear.
Rad.
.500
.531
.563
.625
.1248
.1248
.1248
.1248
.866
.866
.866
.866
.551
.551
.551
.551
.315
.315
.315
.315
#2-56
#2-56
#2-56
#2-56
.326
.326
.326
.326
.688
.813
.844
.938
1.000
1.063
1.188
1.313
1.469
1.563
1.625
1.750
1.813
1.938
2.063
2.250
2.313
2.406
2.563
2.875
3.063
3.188
.1873
.1873
.1873
.1873
.1873
.1873
.2498
.2498
.2498
.2498
.2498
.2498
.2498
.3747
.3747
.3747
.3747
.3747
.3747
.3747
.3747
.3747
.512
.512
.512
.512
.512
.512
.591
.591
.591
.591
.591
.591
.591
.750
.750
.750
.750
.750
.750
.750
.750
.750
.551
.551
.551
.551
.551
.551
.669
.669
.669
.669
.669
.669
.669
.945
.945
.945
.945
.945
.945
.945
.945
.945
.315
.315
.315
.315
.315
.315
.394
.394
.394
.394
.394
.394
.394
.551
.551
.551
.551
.551
.551
.551
.551
.551
#2-56
#2-56
#2-56
#2-56
#2-56
#2-56
#2-56
#2-56
#2-56
#2-56
#2-56
#2-56
#2-56
#6-32
#6-32
#6-32
#6-32
#6-32
#6-32
#6-32
#6-32
#6-32
.326
.326
.326
.326
.326
.326
.445
.445
.445
.445
.445
.445
.445
.551
.551
.551
.551
.551
.551
.551
.551
.551
Catalog Number
No.
of
Teeth
P.D.
O.D.
S1VS32-014F1608
S1VS32-015F1608
S1VS32-016F1608
S1VS32-018F1608
14
15
16
18
.4375
.4688
.5000
.5625
S1VS32-020F1312
S1VS32-024F1312
S1VS32-025F1312
S1VS32-028F1312
S1VS32-030F1312
S1VS32-032F1312
S1VS32-036F1316
S1VS32-040F1316
S1VS32-045F1316
S1VS32-048F1316
S1VS32-050F1316
S1VS32-054F1316
S1VS32-056F1316
S1VS32-060F1324
S1VS32-064F1324
S1VS32-070F1324
S1VS32-072F1324
S1VS32-075F1324
S1VS32-080F1324
S1VS32-090F1324
S1VS32-096F1324
S1VS32-100F1324
20
24
25
28
30
32
36
40
45
48
50
54
56
60
64
70
72
75
80
90
96
100
.6250
.7500
.7813
.8750
.9375
1.0000
1.1250
1.2500
1.4063
1.5000
1.5625
1.6875
1.7500
1.8750
2.0000
2.1875
2.2500
2.3438
2.5000
2.8125
3.0000
3.1250
Fig. 1
15
16
Fig. 2
INCH COMPONENT
Fig. 2
10
Fig. 1
8
9
B P.D. O.D.
5
6
.250
.197
1-104
+.0005
-.0000
SPUR GEARS 32 PITCH

AGMA 10
1/8 FACE
1/4 BORE
20 PRESSURE ANGLE
R
Inch
MATERIAL:
1
Precision
Component
303 Stainless Steel


.375
.125
1/8
SUB DRILL
#6-32 SET SCREW
O.D.
P.D.
.500
.2498 +.0005
-.0000
INCH COMPONENT
Catalog Number
303 Stainless
Steel
2024 Aluminum
Anodized
S1066Z-032S014
S1066Z-032S018
S1066Z-032S020
S1066Z-032S024
S1066Z-032S026
S1066Z-032S028
S1066Z-032S030
S1066Z-032S032
S1066Z-032S036
S1066Z-032S040
S1066Z-032S042
S1066Z-032S048
S1066Z-032S050
S1066Z-032S054
S1066Z-032S056
S1066Z-032S060
S1066Z-032S064
S1066Z-032S070
S1066Z-032S072
S1066Z-032S075
S1066Z-032S076
S1066Z-032S080
S1066Z-032S088
S1066Z-032S090
S1066Z-032S096
S1066Z-032S100
S1066Z-032S110
S1066Z-032S120
S1066Z-032S124
S1066Z-032S130
S1066Z-032A014
S1066Z-032A018
S1066Z-032A020
S1066Z-032A024
S1066Z-032A026
S1066Z-032A028
S1066Z-032A030
S1066Z-032A032
S1066Z-032A036
S1066Z-032A040
S1066Z-032A042
S1066Z-032A048
S1066Z-032A050
S1066Z-032A054
S1066Z-032A056
S1066Z-032A060
S1066Z-032A064
S1066Z-032A070
S1066Z-032A072
S1066Z-032A075
S1066Z-032A076
S1066Z-032A080
S1066Z-032A088
S1066Z-032A090
S1066Z-032A096
S1066Z-032A100
S1066Z-032A110
S1066Z-032A120
S1066Z-032A124
S1066Z-032A130
6
No.
of
Teeth
P.D.
O.D.
14
18
20
24
26
28
30
32
36
40
42
48
50
54
56
60
64
70
72
75
76
80
88
90
96
100
110
120
124
130
.4375
.5625
.6250
.7500
.8125
.8750
.9375
1.0000
1.1250
1.2500
1.3125
1.5000
1.5625
1.6875
1.7500
1.8750
2.0000
2.1875
2.2500
2.3438
2.3750
2.5000
2.7500
2.8125
3.0000
3.1250
3.4375
3.7500
3.8750
4.0625
.500
.625
.688
.813
.875
.938
1.000
1.063
1.188
1.313
1.375
1.563
1.625
1.750
1.813
1.938
2.063
2.250
2.313
2.406
2.438
2.563
2.813
2.875
3.063
3.188
3.500
3.813
3.938
4.125
1-105
7
8
9
10
11
12
13
14
15
16
I
R
T
1
2
SPUR GEARS 32 PITCH

AGMA 10
3/16 FACE
3/16 BORE
20 PRESSURE ANGLE
Inch
MATERIAL:
1
Precision
Component
303 Stainless Steel

.406
.187
7/64
SUB DRILL
#4-40 SET SCREW
4
O.D.
P.D.
.375
5
.1873 +.0005
-.0000
INCH COMPONENT
Catalog Number
7
8
9
10
11
12
13
14
15
16
303 Stainless
Steel
2024 Aluminum
Anodized
S1084Z-032S012
S1084Z-032S016
S1084Z-032S018
S1084Z-032S020
S1084Z-032S022
S1084Z-032S024
S1084Z-032S026
S1084Z-032S028
S1084Z-032S030
S1084Z-032S032
S1084Z-032S036
S1084Z-032S040
S1084Z-032S048
S1084Z-032S056
S1084Z-032S060
S1084Z-032S064
S1084Z-032S068
S1084Z-032S072
S1084Z-032S080
S1084Z-032S084
S1084Z-032S088
S1084Z-032S092
S1084Z-032S096
S1084Z-032S100
S1084Z-032S108
S1084Z-032S112
S1084Z-032S116
S1084Z-032S120
S1084Z-032S128
S1084Z-032S130
S1084Z-032A012
S1084Z-032A016
S1084Z-032A018
S1084Z-032A020
S1084Z-032A022
S1084Z-032A024
S1084Z-032A026
S1084Z-032A028
S1084Z-032A030
S1084Z-032A032
S1084Z-032A036
S1084Z-032A040
S1084Z-032A048
S1084Z-032A056
S1084Z-032A060
S1084Z-032A064
S1084Z-032A068
S1084Z-032A072
S1084Z-032A080
S1084Z-032A084
S1084Z-032A088
S1084Z-032A092
S1084Z-032A096
S1084Z-032A100
S1084Z-032A108
S1084Z-032A112
S1084Z-032A116
S1084Z-032A120
S1084Z-032A128
S1084Z-032A130
No.
of
Teeth
P.D.
O.D.
12
16
18
20
22
24
26
28
30
32
36
40
48
56
60
64
68
72
80
84
88
92
96
100
108
112
116
120
128
130
.3750
.5000
.5625
.6250
.6875
.7500
.8125
.8750
.9375
1.0000
1.1250
1.2500
1.5000
1.7500
1.8750
2.0000
2.1250
2.2500
2.5000
2.6250
2.7500
2.8750
3.0000
3.1250
3.3750
3.5000
3.6250
3.7500
4.0000
4.0625
.438
.563
.625
.688
.750
.813
.875
.938
1.000
1.063
1.188
1.313
1.563
1.813
1.938
2.063
2.188
2.313
2.563
2.688
2.813
2.938
3.063
3.188
3.438
3.563
3.688
3.813
4.063
4.125
1-106
SPUR GEARS 32 PITCH

AGMA 10
3/16 FACE
1/4 BORE
20 PRESSURE ANGLE
R
Inch
MATERIAL:
1
Precision
Component
303 Stainless Steel

T
1

2
.437
.187
1/8
SUB DRILL
#6-32 SET SCREW
4
O.D.
P.D.
.500
5
.2498 +.0005
-.0000
INCH COMPONENT
Catalog Number
303 Stainless
Steel
2024 Aluminum
Anodized
S1086Z-032S014
S1086Z-032S016
S1086Z-032S018
S1086Z-032S020
S1086Z-032S022
S1086Z-032S024
S1086Z-032S026
S1086Z-032S028
S1086Z-032S030
S1086Z-032S032
S1086Z-032S034
S1086Z-032S036
S1086Z-032S040
S1086Z-032S048
S1086Z-032S052
S1086Z-032S056
S1086Z-032S060
S1086Z-032S064
S1086Z-032S072
S1086Z-032S076
S1086Z-032S080
S1086Z-032S088
S1086Z-032S092
S1086Z-032S096
S1086Z-032S100
S1086Z-032S112
S1086Z-032S120
S1086Z-032S128
S1086Z-032S130
S1086Z-032S132
S1086Z-032A014
S1086Z-032A016
S1086Z-032A018
S1086Z-032A020
S1086Z-032A022
S1086Z-032A024
S1086Z-032A026
S1086Z-032A028
S1086Z-032A030
S1086Z-032A032
S1086Z-032A034
S1086Z-032A036
S1086Z-032A040
S1086Z-032A048
S1086Z-032A052
S1086Z-032A056
S1086Z-032A060
S1086Z-032A064
S1086Z-032A072
S1086Z-032A076
S1086Z-032A080
S1086Z-032A088
S1086Z-032A092
S1086Z-032A096
S1086Z-032A100
S1086Z-032A112
S1086Z-032A120
S1086Z-032A128
S1086Z-032A130
S1086Z-032A132
No.
of
Teeth
P.D.
O.D.
14
16
18
20
22
24
26
28
30
32
34
36
40
48
52
56
60
64
72
76
80
88
92
96
100
112
120
128
130
132
.4375
.5000
.5625
.6250
.6875
.7500
.8125
.8750
.9375
1.0000
1.0625
1.1250
1.2500
1.5000
1.6250
1.7500
1.8750
2.0000
2.2500
2.3750
2.5000
2.7500
2.8750
3.0000
3.1250
3.5000
3.7500
4.0000
4.0625
4.1250
.500
.563
.625
.688
.750
.813
.875
.938
1.000
1.063
1.125
1.188
1.313
1.563
1.688
1.813
1.938
2.063
2.313
2.438
2.563
2.813
2.938
3.063
3.188
3.563
3.813
4.063
4.125
4.188
1-107
7
8
9
10
11
12
13
14
15
16
SPUR GEARS 32 PITCH

3/16 FACE WIDTH
MATERIAL:
Inch
Brass
Gears other than standard stock sizes

T
1
2
3/16
B +.0010
-.0000
O.D. P.D.
5
E
INCH COMPONENT
Catalog Number
B Bore .2500
A 1B 2-N32040
A 1B 2-N32044
A 1B 2-N32048
A 1B 2-N32052
B Bore .3125
A 1B 2-N32056A
A 1B 2-N32060
A 1B 2-N32064
A 1B 2-N32064A
A 1B 2-N32072
A 1B 2-N32072A
A 1B 2-N32080
A 1B 2-N32080A
A 1B 2-N32096
A 1B 2-N32096A
A 1B 2-N32108
A 1B 2-N32120
A 1B 2-N32128
A 1B 2-N32128A
A 1B 2-N32132
A 1B 2-N32192
O.D.
E
Length
C
Hub
Dia.
D
Hub
Proj.
1.250
1.375
1.500
1.625
1.313
1.438
1.563
1.688
7/16
7/16
7/16
7/16
1/2
1/2
1/2
1/2
1/4
1/4
1/4
1/4
1.750
1.875
2.000
2.000
2.250
2.250
2.500
2.500
3.000
3.000
3.375
3.750
4.000
4.000
4.125
6.000
1.813
1.938
2.063
2.063
2.313
2.313
2.563
2.563
3.063
3.063
3.438
3.813
4.063
4.063
4.188
6.063
7/16
7/16
1/2
7/16
7/16
1/2
1/2
7/16
7/16
1/2
7/16
7/16
7/16
1/2
7/16
1/2
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
3/4
3/4
3/4
3/4
3/4
3/4
7/8
1/4
1/4
5/16
1/4
1/4
5/16
.5/16
1/4
1/4
5/16
1/4
1/4
1/4
5/16
1/4
5/16
No.
of
Teeth
P.D.
40
44
48
52
56
60
64
64
72
72
80
80
96
96
108
120
128
128
132
192
6
7
8
9
10
11
12
13
14
15
1-108
REV: 07.06.12 mh
16
SPUR GEARS 32 PITCH

3/16 FACE WIDTH
MATERIAL:
Inch
Steel
T
1
2
O.D. P.D.
3
4
B C
5
3/16
INCH COMPONENT
Catalog Number
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
1C
1C
1C
1C
1C
1C
1C
1C
1C
1C
1C
1C
1C
1C
1C
1C
1C
1C
1C
1C
1C
1C
2-N32012
2-N32015
2-N32016
2-N32018
2-N32020
2-N32022
2-N32024
2-N32026
2-N32028
2-N32030
2-N32032
2-N32032A
2-N32040
2-N32048
2-N32056
2-N32064
2-N32080
2-N32096
2-N32128
2-N32160
2-N32192
2-N32200
No.
of
Teeth
P.D.
O.D.
B
Bore
12
15
16
18
20
22
24
26
28
30
32
32
40
48
56
64
80
96
128
160
192
200
.375
.469
.500
.562
.625
.687
.750
.812
.875
.937
1.000
1.000
1.250
1.500
1.750
2.000
2.500
3.000
4.000
5.000
6.000
6.250
.438
.531
.562
.625
.687
.750
.812
.875
.937
1.000
1.062
1.062
1.312
1.562
1.812
2.062
2.562
3.062
4.062
5.062
6.062
6.312
3/16
3/16
3/16
1/4
1/4
5/16
5/16
5/16
5/16
5/16
5/16
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
E
Length
C
Hub
Dia.
D
Hub
Proj.
7/16
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
9/16
1/2
9/16
9/16
9/16
9/16
9/16
11/16
11/16
11/16
13/16
13/16
5/16
3/8
13/32
15/32
17/32
19/32
21/32
23/32
3/4
3/4
3/4
3/4
7/8
7/8
1
1
1-1/8
1-1/4
1-3/8
1-3/8
1-1/2
1-1/2
1/4
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
3/8
5/16
3/8
3/8
3/8
3/8
3/8
1/2
1/2
1/2
5/8
5/8
7
8
9
10
11
12
13
14
15
1-109
16
I
R

AGMA 10
3/16 FACE
3/16 & 1/4 BORE
20 PRESSURE ANGLE
MATERIAL:
SPECIFICATIONS:
Inch
Gear - Acetal

B Bore Ref.
C
E
.1873
.438
.453
.2498
.530
.483


pin type hubs.
5
6
7
8
No. of
Teeth
Code
9
10
11
12
13
14
15
16
1-110
B +.0005
-.0000
INCH COMPONENT
CATALOG NUMBER
S1V8 Z-032DS
Bore Code B Bore

.1873
4
.2498
6
1
Precision
Component
P.D. O.D.
#2-56
CAP SCREW
.187
No. of
Teeth Code
No. of
Teeth
P.D.
O.D.
020
021
022
023
024
025
026
028
030
032
036
040
042
044
046
048
050
052
056
060
063
064
066
069
072
075
080
084
088
092
096
104
108
112
124
20
21
22
23
24
25
26
28
30
32
36
40
42
44
46
48
50
52
56
60
63
64
66
69
72
75
80
84
88
92
96
104
108
112
124
.6250
.6563
.6875
.7188
.7500
.7813
.8125
.8750
.9375
1.0000
1.1250
1.2500
1.3125
1.3750
1.4375
1.5000
1.5625
1.6250
1.7500
1.8750
1.9688
2.0000
2.0625
2.1563
2.2500
2.3438
2.5000
2.6250
2.7500
2.8750
3.0000
3.2500
3.3750
3.5000
3.8750
.688
.719
.750
.781
.813
.844
.875
.938
1.000
1.063
1.188
1.313
1.375
1.438
1.500
1.563
1.625
1.688
1.813
1.938
2.031
2.063
2.125
2.219
2.313
2.406
2.563
2.688
2.813
2.938
3.063
3.313
3.438
3.563
3.938

AGMA 10
3/16 FACE
3/8 BORE
20 PRESSURE ANGLE
R
Inch
MATERIAL:
1
Precision
Component
Acetal


2
O.D. P.D.
.3750 +.0005
-.0000
4
.187
INCH COMPONENT
CATALOG NUMBER
S1288Z-032D
No. of
Teeth
Code
No. of
Teeth Code
No. of
Teeth
P.D.
O.D.
020
021
022
023
024
025
026
028
030
032
036
040
042
044
046
048
050
052
056
060
063
064
066
069
072
075
080
084
088
092
096
104
108
112
124
20
21
22
23
24
25
26
28
30
32
36
40
42
44
46
48
50
52
56
60
63
64
66
69
72
75
80
84
88
92
96
104
108
112
124
.6250
.6563
.6875
.7188
.7500
.7813
.8125
.8750
.9375
1.0000
1.1250
1.2500
1.3125
1.3750
1.4375
1.5000
1.5625
1.6250
1.7500
1.8750
1.9688
2.0000
2.0625
2.1563
2.2500
2.3438
2.5000
2.6250
2.7500
2.8750
3.0000
3.2500
3.3750
3.5000
3.8750
.688
.719
.750
.781
.813
.844
.875
.938
1.000
1.063
1.188
1.313
1.375
1.438
1.500
1.563
1.625
1.688
1.813
1.938
2.031
2.063
2.125
2.219
2.313
2.406
2.563
2.688
2.813
2.938
3.063
3.313
3.438
3.563
3.938
6
7
8
9
10
11
12
13
14
15
1-111
16
I
R
T
1
2

AGMA 10
3/16 FACE
3/16 & 1/4 BORE
20 PRESSURE ANGLE
Inch
MATERIAL:
Gear - Acetal
.437

Fairloc hubs.
1/8
3
.500
+.0005
P.D. O.D.
B -.0000
4
#6-32 SET SCREW
SUB DRILL
5
6
INCH COMPONENT
CATALOG NUMBER
S108 Z-032DS
No. of
Teeth
Code
7
8
Bore Code B Bore

.1873
4
.2498
6
9
10
11
12
13
14
15
16
1-112
1
Precision
Component
.187
No. of
Teeth Code
No. of
Teeth
P.D.
O.D.
020
021
022
023
024
025
026
028
030
032
036
040
042
044
046
048
050
052
056
060
063
064
066
069
072
075
080
084
088
092
096
104
108
112
124
20
21
22
23
24
25
26
28
30
32
36
40
42
44
46
48
50
52
56
60
63
64
66
69
72
75
80
84
88
92
96
104
108
112
124
.6250
.6563
.6875
.7188
.7500
.7813
.8125
.8750
.9375
1.0000
1.1250
1.2500
1.3125
1.3750
1.4375
1.5000
1.5625
1.6250
1.7500
1.8750
1.9688
2.0000
2.0625
2.1563
2.2500
2.3438
2.5000
2.6250
2.7500
2.8750
3.0000
3.2500
3.3750
3.5000
3.8750
.688
.719
.750
.781
.813
.844
.875
.938
1.000
1.063
1.188
1.313
1.375
1.438
1.500
1.563
1.625
1.688
1.813
1.938
2.031
2.063
2.125
2.219
2.313
2.406
2.563
2.688
2.813
2.938
3.063
3.313
3.438
3.563
3.938

3/16 FACE
20 PRESSURE ANGLE
MATERIAL:
Inch
Gear - Acetal
Insert - Brass
T
1
2
1/2
5/16
5/32
SUB DRILL
SET SCREW
O.D. P.D.
B +.001
-.000
3/16
INCH COMPONENT
Catalog Number
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
1T
1T
1T
1T
1T
1T
1T
1T
1T
1T
1T
1T
1T
1T
1T
1T
1T
1T
1T
1T
1T
1T
1T
1T
1T
2-Y32012
2-Y32014
2-Y32015
2-Y32016
2-Y32018
2-Y32020
2-Y32022
2-Y32024
2-Y32026
2-Y32028
2-Y32030
2-Y32032
2-Y32034
2-Y32036
2-Y32038
2-Y32040
2-Y32042
2-Y32044
2-Y32048
2-Y32052
2-Y32056
2-Y32064
2-Y32072
2-Y32080
2-Y32096
No.
of
Teeth
P.D.
O.D.
B
Bore
C
Hub
Dia.
Set
Screw
Type
12
14
15
16
18
20
22
24
26
28
30
32
34
36
38
40
42
44
48
52
56
64
72
80
96
.375
.438
.469
.500
.563
.625
.688
.750
.813
.875
.938
1.000
1.063
1.125
1.188
1.250
1.313
1.375
1.500
1.625
1.750
2.000
2.250
2.500
3.000
.438
.500
.531
.563
.625
.688
.750
.813
.875
.938
1.000
1.063
1.125
1.188
1.250
1.313
1.375
1.438
1.563
1.688
1.813
2.063
2.313
2.563
3.063
.125
.125
.125
.125
.125
.187
.187
.187
.187
.187
.187
.250
.250
.250
.250
.250
.250
.250
.250
.312
.312
.312
.312
.312
.312
9/32
5/16
5/16
11/32
11/32
15/32
1/2
1/2
9/16
1/2
9/16
5/8
39/64
39/64
39/64
39/64
39/64
39/64
5/8
43/64
43/64
43/64
13/16
13/16
13/16
#2-56
#2-56
#2-56
#2-56
#2-56
#4-40
#4-40
#4-40
#4-40
#4-40
#4-40
#6-32
#6-32
#6-32
#6-32
#6-32
#6-32
#6-32
#6-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
Plain
Plain
Plain
Plain
Plain
Plain
Plain
Plain
Plain
Plain
Web
Web
Web
Web
Web
Web
Web
Web
Web
Web
Web
Web
Web
Web
Web
7
8
9
10
11
12
13
14
15
1-113
16
I
R

AGMA 9
20 TRUE PRESSURE ANGLE
Inch
MATERIAL:
Acetal
COLOR:
Black
TRUE ANGLE
-40F to +180F
2
3
Tooth profile and pressure angle

of these gears are the same as metal
gears that are manufactured by hobbing
and shaping methods.
F
E
P.D. B*
D O.D.
5
3/16 FACE
PRECISION MOLDED TO AGMA 9 QUALITY
INCH COMPONENT
7
8
9
10
11
12
13
Catalog Number
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
1M
1M
1M
1M
1M
1M
1M
1M
1M
1M
1M
1M
1M
1M
1M
1M
1M
1M
1M
1M
1M
1M
2-TA32008
2-TA32010
2-TA32012
2-TA32014
2-TA32015
2-TA32016
2-TA32018
2-TA32020
2-TA32022
2-TA32024
2-TA32026
2-TA32028
2-TA32030
2-TA32032
2-TA32036
2-TA32040
2-TA32044
2-TA32048
2-TA32052
2-TA32056
2-TA32060
2-TA32064
No.
of
Teeth
P.D.
+.00
-.01
O.D.
+.00
-.01
B*
Bore
Nom.
C
Hub
Dia.
D
Dia.
8
10
12
14
15
16
18
20
22
24
26
28
30
32
36
40
44
48
52
56
60
64
.250
.3125
.375
.4375
.4688
.500
.5625
.625
.6875
.750
.8125
.875
.9375
1.000
1.125
1.250
1.375
1.500
1.625
1.750
1.875
2.000
.313
.375
.438
.50
.531
.563
.625
.688
.75
.813
.875
.938
1.00
1.063
1.188
1.313
1.438
1.563
1.688
1.813
1.938
2.063
3/32
1/8
3/16
3/16
3/16
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
.162
.225
.285
.312
.312
.375
.375
.375
.375
.375
.375
.375
.375
.437
.437
.437
.437
.437
.437
.437
.437
.437
Solid
Solid
Solid
Solid
Solid
Solid
Solid
Solid
.480
.543
.605
.668
.730
.793
.918
1.042
1.168
1.293
1.418
1.543
1.668
1.793
Solid
Solid
Solid
Solid
Solid
Solid
Solid
Solid
.093
.093
.093
.093
.093
.093
.093
.093
.093
.093
.093
.093
.093
.093
.375
.375
.375
.375
.375
.375
.375
.375
.375
.375
.375
.375
.375
.437
.437
.437
.437
.437
.437
.437
.437
.437
*BORE is for press fit on shaft size indicated.
14
15
16
1-114

3/16 FACE
20 PRESSURE ANGLE
MATERIAL:
Inch
Acetal
Discounts available on
large quantity orders.
T
1
2
1/2
3
O.D. P.D.
5
5/16
3/16
INCH COMPONENT
Catalog Number
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
1M
1M
1M
1M
1M
1M
1M
1M
1M
1M
1M
1M
1M
1M
1M
1M
1M
1M
1M
1M
1M
1M
1M
1M
1M
2-Y32012
2-Y32014
2-Y32015
2-Y32016
2-Y32018
2-Y32020
2-Y32022
2-Y32024
2-Y32026
2-Y32028
2-Y32030
2-Y32032
2-Y32034
2-Y32036
2-Y32038
2-Y32040
2-Y32042
2-Y32044
2-Y32048
2-Y32052
2-Y32056
2-Y32064
2-Y32072
2-Y32080
2-Y32096
No.
of
Teeth
P.D.
O.D.
12
14
15
16
18
20
22
24
26
28
30
32
34
36
38
40
42
44
48
52
56
64
72
80
96
.375
.438
.469
.500
.563
.625
.688
.750
.813
.875
.938
1.000
1.063
1.125
1.188
1.250
1.313
1.375
1.500
1.625
1.750
2.000
2.250
2.500
3.000
.438
.500
.531
.563
.625
.688
.750
.813
.875
.938
1.000
1.063
1.125
1.188
1.250
1.313
1.375
1.438
1.563
1.688
1.813
2.063
2.313
2.563
3.063
B
Bore
+.0010
-.0020
.1562
.1562
.1562
.1562
.1562
.1875
.1875
.1875
.1875
.1875
.1875
.2500
.2500
.2500
.2500
.2500
.2500
.2500
.2500
.3125
.3125
.3125
.3125
.3125
.3125
C
Hub
Dia.
Type
9/32
5/16
5/16
11/32
11/32
15/32
1/2
1/2
9/16
1/2
9/16
5/8
39/64
39/64
39/64
39/64
39/64
39/64
5/8
43/64
43/64
43/64
13/16
13/16
13/16
Plain
Plain
Plain
Plain
Plain
Plain
Plain
Plain
Plain
Plain
Web
Web
Web
Web
Web
Web
Web
Web
Web
Web
Web
Web
Web
Web
Web
7
8
9
10
11
12
13
14
15
1-115
REV: 07.11.12 mh
16

MATERIAL:
Inch
Nylon 101
1
2
3
O.D. P.D.
D
F
6
INCH COMPONENT
7
8
9
10
11
Catalog Number
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
1N
1N
1N
1N
1N
1N
1N
1N
1N
1N
1N
1N
1N
1N
1N
12
13
14
15
16
1-116
2-N32012
2-N32014
2-N32016
2-N32018
2-N32020
2-N32022
2-N32024
2-N32028
2-N32032
2-N32036
2-N32040
2-N32044
2-N32048
2-N32052
2-N32062
No.
of
Teeth
P.D.
O.D.
Ref.
B
Bore
F
Face
Width
C
Hub
Dia.
D
Hub
Proj.
12
14
16
18
20
22
24
28
32
36
40
44
48
52
62
.375
.438
.500
.563
.625
.688
.750
.875
1.000
1.125
1.250
1.375
1.500
1.625
1.938
.44
.50
.56
.63
.69
.75
.81
.94
1.06
1.19
1.31
1.44
1.56
1.69
2.00
1/8
1/8
3/16
3/16
3/16
1/4
3/16
3/16
1/4
1/4
1/4
1/4
1/4
1/4
3/8
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
1/4
1/4
5/16
3/8
3/8
1/2
9/16
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
3/16
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/8
1/4
1/4
1/4
1/4
1/4
3/8

AGMA 10
1/8 FACE
1/4 BORE
20 PRESSURE ANGLE
R
Inch
MATERIAL:
1
Precision
Component
303 Stainless Steel


2
.406
.125
.250
.2498 +.0005
-.0000
.312 +.000
-.003
3/8
O.D. P.D.
Catalog Number
2024 Aluminum
Anodized
S1166Z-032S014
S1166Z-032S018
S1166Z-032S020
S1166Z-032S024
S1166Z-032S026
S1166Z-032S028
S1166Z-032S030
S1166Z-032S032
S1166Z-032S034
S1166Z-032S036
S1166Z-032S040
S1166Z-032S042
S1166Z-032S045
S1166Z-032S048
S1166Z-032S050
S1166Z-032S056
S1166Z-032S060
S1166Z-032S064
S1166Z-032S070
S1166Z-032S072
S1166Z-032S075
S1166Z-032S076
S1166Z-032S080
S1166Z-032S088
S1166Z-032S096
S1166Z-032S112
S1166Z-032S120
S1166Z-032S127
S1166Z-032S128
S1166Z-032S132
S1166Z-032A014
S1166Z-032A018
S1166Z-032A020
S1166Z-032A024
S1166Z-032A026
S1166Z-032A028
S1166Z-032A030
S1166Z-032A032
S1166Z-032A034
S1166Z-032A036
S1166Z-032A040
S1166Z-032A042
S1166Z-032A045
S1166Z-032A048
S1166Z-032A050
S1166Z-032A056
S1166Z-032A060
S1166Z-032A064
S1166Z-032A070
S1166Z-032A072
S1166Z-032A075
S1166Z-032A076
S1166Z-032A080
S1166Z-032A088
S1166Z-032A096
S1166Z-032A112
S1166Z-032A120
S1166Z-032A127
S1166Z-032A128
S1166Z-032A132
5
6
FOR CLAMPS
SEE INDEX
INCH COMPONENT
303 Stainless
Steel
No.
of
Teeth
P.D.
O.D.
14
18
20
24
26
28
30
32
34
36
40
42
45
48
50
56
60
64
70
72
75
76
80
88
96
112
120
127
128
132
.4375
.5625
.6250
.7500
.8125
.8750
.9375
1.0000
1.0625
1.1250
1.2500
1.3125
1.4063
1.5000
1.5625
1.7500
1.8750
2.0000
2.1875
2.2500
2.3438
2.3750
2.5000
2.7500
3.0000
3.5000
3.7500
3.9688
4.0000
4.1250
.500
.625
.688
.813
.875
.938
1.000
1.063
1.125
1.188
1.313
1.375
1.469
1.563
1.625
1.813
1.938
2.063
2.250
2.313
2.406
2.438
2.563
2.813
3.063
3.563
3.813
4.031
4.063
4.188
1-117
7
8
9
10
11
12
13
14
15
16
I
R
T
1
2
3

AGMA 10
1/8 FACE
3/8 BORE
20 PRESSURE ANGLE
Inch
MATERIAL:
1
Precision
Component
303 Stainless Steel

B
(8 PLACES)

See Index for hubs.
.3750 +.0000
-.0002
O.D. P.D. C
5
6
.125
INCH COMPONENT
Catalog Number
7
8
9
10
11
12
13
14
303 Stainless
Steel
2024 Aluminum
Anodized
S1268Z-032S019
S1268Z-032S020
S1268Z-032S024
S1268Z-032S026
S1268Z-032S028
S1268Z-032S030
S1268Z-032S032
S1268Z-032S036
S1268Z-032S040
S1268Z-032S042
S1268Z-032S048
S1268Z-032S050
S1268Z-032S052
S1268Z-032S054
S1268Z-032S056
S1268Z-032S060
S1268Z-032S064
S1268Z-032S066
S1268Z-032S070
S1268Z-032S072
S1268Z-032S080
S1268Z-032S086
S1268Z-032S088
S1268Z-032S092
S1268Z-032S096
S1268Z-032S120
S1268Z-032S128
S1268Z-032A019
S1268Z-032A020
S1268Z-032A024
S1268Z-032A026
S1268Z-032A028
S1268Z-032A030
S1268Z-032A032
S1268Z-032A036
S1268Z-032A040
S1268Z-032A042
S1268Z-032A048
S1268Z-032A050
S1268Z-032A052
S1268Z-032A054
S1268Z-032A056
S1268Z-032A060
S1268Z-032A064
S1268Z-032A066
S1268Z-032A070
S1268Z-032A072
S1268Z-032A080
S1268Z-032A086
S1268Z-032A088
S1268Z-032A092
S1268Z-032A096
S1268Z-032A120
S1268Z-032A128
15
16
1-118
No.
of
Teeth
P.D.
O.D.
B
Dia.
C
Dia.
19
20
24
26
28
30
32
36
40
42
48
50
52
54
56
60
64
66
70
72
80
86
88
92
96
120
128
.5938
.6250
.7500
.8125
.8750
.9375
1.0000
1.1250
1.2500
1.3125
1.5000
1.5625
1.6250
1.6875
1.7500
1.8750
2.0000
2.0625
2.1875
2.2500
2.5000
2.6875
2.7500
2.8750
3.0000
3.7500
4.0000
.656
.688
.813
.875
.938
1.000
1.063
1.188
1.313
1.375
1.563
1.625
1.688
1.750
1.813
1.938
2.063
2.125
2.250
2.313
2.563
2.750
2.813
2.938
3.063
3.813
4.063
3/8
3/8
3/8
3/8
3/8
3/8
3/8
1/2
1/2
1-3/8
1-3/8
1-3/8
1-3/4
1-3/4
1-3/4
1-3/4
2-1/4
2-1/4

3/16 FACE WIDTH
20 PRESSURE ANGLE
R
Inch
MATERIAL:
Steel
For large quantity orders,

discounts available.
T
1
2
3
3/16
4
B
P.D.
O.D.
5
6
INCH COMPONENT
Catalog Number
A
A
A
A
A
A
A
A
A
A
A
A
1C
1C
1C
1C
1C
1C
1C
1C
1C
1C
1C
1C
1-Y32020A
1-Y32024
1-Y32036A
1-Y32036
1-Y32040
1-Y32052
1-Y32056
1-Y32056A
1-Y32064
1-Y32072
1-Y32080
1-Y32088
No.
of
Teeth
P.D.
O.D.
20
24
36
36
40
52
56
56
64
72
80
88
.625
.750
1.125
1.125
1.250
1.625
1.750
1.750
2.000
2.250
2.500
2.750
.688
.813
1.188
1.188
1.313
1.688
1.813
1.813
2.063
2.313
2.563
2.813
B
Bore
+.0010
-.0000
.2500
.2500
.3125
.3750
.3125
.3750
.3125
.3750
.3750
.3750
.3750
.3750
7
8
9
10
11
12
13
14
15
1-119
REV: 07.06.12 mh
16
D810
D790
D787
D190
P1-120
P1-113
P1-107
P68
A 1C 1--X
P1 of 3
2-16-89
REV: 7.12.12 JF

3/16 FACE WIDTH
R
Inch
MATERIAL:
Steel
Modifications of standard parts

performed at nominal charge.
T
1
2
3/16
3
4
P.D.
O.D.
5
6
INCH COMPONENT
Catalog Number
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
1C
1C
1C
1C
1C
1C
1C
1C
1C
1C
1C
1C
1C
1C
1C
1C
1C
1C
1C
1C
1C
1C
1C
1C
1C
1-N32016
1-N32018
1-N32020
1-N32022
1-N32024
1-N32024A
1-N32026
1-N32028
1-N32030
1-N32030A
1-N32032
1-N32036
1-N32036A
1-N32040
1-N32044
1-N32044A
1-N32048
1-N32052
1-N32056
1-N32056A
1-N32060
1-N32064
1-N32072
1-N32080
1-N32096
No.
of
Teeth
P.D.
O.D.
16
18
20
22
24
24
26
28
30
30
32
36
36
40
44
44
48
52
56
56
60
64
72
80
96
.500
.563
.625
.688
.750
.750
.813
.875
.937
.937
1.000
1.125
1.125
1.250
1.375
1.375
1.500
1.625
1.750
1.750
1.875
2.000
2.250
2.500
3.000
.563
.625
.688
.750
.813
.813
.875
.937
1.000
1.000
1.063
1.188
1.188
1.313
1.438
1.438
1.563
1.688
1.813
1.813
1.938
2.063
2.313
2.563
3.063
B
Bore
+.0010
-.0000
.1875
.1875
.1875
.1875
.2500
.3125
.2500
.3750
.3125
.3750
.3750
.3125
.3750
.3125
.3125
.3750
.3125
.3750
.3125
.3750
.3750
.3750
.3750
.3750
.3750
7
8
9
10
11
12
13
14
15
1-120
REV: 07.18.12 mh
16

1/16 FACE WIDTH
R
Inch
MATERIAL:
Brass
Sizes not shown in this catalog

T
1
2
1/16
3
B
P.D. O.D.
5
6
INCH COMPONENT
Catalog Number
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
1B
1B
1B
1B
1B
1B
1B
1B
1B
1B
1B
1B
1B
1B
1B
1B
1B
1B
1B
1B
1B
1B
1B
1B
1B
1B
1B
1B
1B
1-N32006
1-N32008
1-N32009
1-N32010
1-N32011
1-N32012
1-N32014
1-N32015
1-N32016
1-N32018
1-N32020
1-N32024
1-N32028
1-N32032
1-N32040
1-N32048
1-N32050
1-N32060
1-N32064
1-N32070
1-N32075
1-N32080
1-N32090
1-N32096
1-N32100
1-N32112
1-N32120
1-N32128
1-N32144
No.
of
Teeth
P.D.
O.D.
6
8
9
10
11
12
14
15
16
18
20
24
28
32
40
48
50
60
64
70
75
80
90
96
100
112
120
128
144
.188
.250
.281
.313
.344
.375
.438
.469
.500
.563
.625
.750
.875
.938
1.250
1.500
1.563
1.875
2.000
2.188
2.344
2.500
2.813
3.000
3.125
3.500
3.750
4.000
4.500
.250
.313
.344
.375
.406
.438
.500
.531
.563
.625
.688
.813
.938
1.063
1.313
1.563
1.625
1.938
2.063
2.250
2.406
2.563
2.875
3.063
3.188
3.563
3.813
4.063
4.563
B
Bore
+.0010
-.0000
.0625
.1250
.1250
.1250
.1250
.1250
.1250
.1250
.1875
.1875
.1875
.1875
.1875
.1875
.2500
.2500
.3125
.3125
.3125
.3125
.3125
.3125
.3125
.3125
.3125
.3125
.3125
.3750
.3750
7
8
9
10
11
12
13
14
15
1-121
REV: 07.06.12 mh
16

3/16 FACE WIDTH
MATERIAL:
Inch
Brass

on special order.
T
1
2
3/16
3
4
P.D. O.D.
5
6
INCH COMPONENT
Catalog Number
A
*A
A
A
A
A
A
*A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
1B11-N32006
1B11-N32007
1B11-N32008
1B11-N32009
1B11-N32010
1B11-N32011
1B11-N32012
1B11-N32013
1B11-N32014
1B11-N32015
1B11-N32016
1B11-N32018
1B11-N32020
1B11-N32022
1B11-N32024
1B11-N32026
1B11-N32028
1B11-N32030
1B11-N32032
1B11-N32036
1B11-N32040
1B11-N32044
1B11-N32048
1B11-N32056
No.
of
Teeth
P.D.
O.D.
6
7
8
9
10
11
12
13
14
15
16
18
20
22
24
26
28
30
32
36
40
44
48
56
.188
.219
.250
.281
.313
.344
.375
.406
.438
.469
.500
.563
.625
.688
.750
.813
.875
.938
1.000
1.125
1.250
1.375
1.500
1.750
.250
.281
.313
.344
.375
.406
.438
.469
.500
.531
.563
.625
.688
.750
.813
.875
.938
1.000
1.063
1.188
1.313
1.438
1.563
1.813
B
Bore
+.0010
-.0000
.0625
.0938
.1250
.1250
.1250
.1250
.1250
.1250
.1250
.1250
.1875
.1875
.1875
.1875
.1875
.1875
.1875
.1875
.2500
.2500
.2500
.2500
.2500
.3125
7
8
9
10
11
12
13
14
15
1-122
REV: 07.10.12 mh
16

1/16 & 1/32 FACE
3/8 BORE
R
Inch
MATERIAL:

T
1
2
F .010
.375 +.002
-.001
4
P.D. O.D.
5
6
INCH COMPONENT
Catalog Number *
No.
of
Teeth
P.D.
O.D.
F
Face
Width
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
1S
1S
1S
1S
1S
1S
1S
1S
1S
1S
1S
1S
1S
1S
1S
1S
1-N32026
1-N32028
1-N32030
1-N32032
1-N32036
1-N32038
1-N32039
1-N32044
1-N32050
1-N32054
1-N32060
1-N32064
1-N32080
1-N32084
1-N32100
1-N32176
26
28
30
32
36
38
39
44
50
54
60
64
80
84
100
176
.813
.875
.938
1.000
1.125
1.188
1.219
1.375
1.563
1.688
1.875
2.000
2.500
2.625
3.125
5.500
.875
.938
1.000
1.063
1.188
1.250
1.281
1.438
1.625
1.750
1.938
2.063
2.563
2.688
3.188
5.563
1/16
1/16
1/16
1/16
1/16
1/16
1/16
1/16
1/16
1/16
1/16
1/16
1/16
1/16
1/16
1/16
A
A
A
A
A
A
1S11-N32024
1S11-N32031
1S11-N32036
1S11-N32048
1S11-N32072
1S11-N32096
24
31
36
48
72
96
.750
.969
1.125
1.500
2.250
3.000
.813
1.031
1.188
1.563
2.313
3.063
1/32
1/32
1/32
1/32
1/32
1/32
7
8
9
10
11
12
13
14
15
1-123
16
I
R

AGMA 9
1/4 & 3/8 FACE
3/8 & 1/2 BORE
20 PRESSURE ANGLE
MATERIAL:
FEATURES:
2
3
4
5
Inch

Self-lubricating
Quiet operation
Integral metal core
Lightweight
Shock-absorbent
Non-corrodible
FW

B +.0005
-.0000

6
7
8
INCH COMPONENT
CATALOG NUMBER
S12
Z-032PC
FW Face Width
No. of
Teeth
Code
.250 A
.375 C
9
10
11
B Bore Size
.3748
*.4998
* Only available with 48 to 128 teeth

Example:
S12ABZ-032PC072 is a .250 Face, .4998 Bore,
12
13
14
15
16
1-124
1
Precision
Component
No.
No. of
of
Teeth Code Teeth
028
030
032
036
040
048
056
060
064
072
080
096
112
128
28
30
32
36
40
48
56
60
64
72
80
96
112
128
P.D.
O.D.
D
Core
Dia.
.8750
.9375
1.0000
1.1250
1.2500
1.5000
1.7500
1.8750
2.0000
2.2500
2.5000
3.0000
3.5000
4.0000
.938
1.000
1.063
1.188
1.313
1.563
1.813
1.938
2.063
2.313
2.563
3.063
3.563
4.063
.630
.630
.630
.787
.787
.787
.984
.984
1.181
1.181
1.378
1.575
1.575
1.969

AGMA 10
1/8 FACE
3/8 BORE
20 PRESSURE ANGLE
R
Inch
MATERIAL:
1
Precision
Component

Rim - Acetal
T
1

See Index for hubs.
2
B
(8 PLACES)
O.D. P.D.
3
4
.3750 +.0000
-.0002
5
6
.125
INCH COMPONENT
Catalog Number
No.
of
Teeth
P.D.
O.D.
A
Dia.
B
Dia.
C
Dia.
S1268Z-032M028
S1268Z-032M032
S1268Z-032M035
S1268Z-032M036
S1268Z-032M040
S1268Z-032M042
S1268Z-032M045
S1268Z-032M048
S1268Z-032M050
S1268Z-032M055
S1268Z-032M060
S1268Z-032M064
S1268Z-032M065
S1268Z-032M070
S1268Z-032M072
S1268Z-032M075
S1268Z-032M080
S1268Z-032M085
S1268Z-032M090
S1268Z-032M096
S1268Z-032M112
S1268Z-032M128
28
32
35
36
40
42
45
48
50
55
60
64
65
70
72
75
80
85
90
96
112
128
.8750
1.0000
1.0938
1.1250
1.2500
1.3125
1.4063
1.5000
1.5625
1.7188
1.8750
2.0000
2.0313
2.1875
2.2500
2.3438
2.5000
2.6563
2.8125
3.0000
3.5000
4.0000
.938
1.063
1.156
1.188
1.313
1.375
1.469
1.563
1.625
1.781
1.938
2.063
2.094
2.250
2.313
2.406
2.563
2.719
2.875
3.063
3.563
4.063
5/8
5/8
7/8
7/8
7/8
1-1/8
1-1/8
1-1/8
1-3/8
1-3/8
1-5/8
1-5/8
1-5/8
1-7/8
1-7/8
2-1/8
2-1/8
2-3/8
2-5/8
2-5/8
3-1/8
3-5/8
7/32
7/32
7/32
5/16
5/16
3/8
3/8
3/8
3/8
3/8
3/8
3/8
13/16
13/16
13/16
1-3/32
1-3/32
1-3/8
1-3/8
1-3/8
1-3/4
1-3/4
1-3/4
1-3/4
7
8
9
10
11
12
13
14
15
1-125
16
I
R
MOLDED HUBLESS SPUR GEARS 32 PITCH

3/16 FACE WIDTH
Inch
MATERIAL:
Nylon 101

on special order.
1
2
3/16
3
4
B
P.D. O.D.
5
6
7
8
9
10
11
INCH COMPONENT
Catalog Number
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
1N
1N
1N
1N
1N
1N
1N
1N
1N
1N
1N
1N
1N
1N
1N
1N
12
13
14
15
16
1-126
1-N32012
1-N32014
1-N32016
1-N32018
1-N32020
1-N32024
1-N32028
1-N32032
1-N32036
1-N32038
1-N32040
1-N32044
1-N32048
1-N32052
1-N32056
1-N32062
No.
of
Teeth
P.D.
O.D.
Ref.
B
Bore
12
14
16
18
20
24
28
32
36
38
40
44
48
52
56
62
.375
.438
.500
.563
.625
.750
.875
1.000
1.125
1.188
1.250
1.375
1.500
1.625
1.750
1.938
.44
.50
.56
.63
.69
.81
.94
1.06
1.19
1.25
1.31
1.44
1.56
1.69
1.81
2.00
1/8
1/8
3/16
3/16
3/16
3/16
3/16
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4

MACHINED
1/4 BORE
R
Inch
MATERIAL:
Bakelite
MAX. TEMPERATURE:
250F
1
2
F
3
4
.2500 +.001
-.000
P.D. O.D.
5
6
INCH COMPONENT
Catalog Number *
No.
of
Teeth
P.D.
O.D.
F
Face Width
A 1P 1-N32016
16
.500
.563
5/16
7
8
9
10
11
12
13
14
15
1-127
REV: 07.10.12 mh
16
I
R
T

AGMA 10
20 PRESSURE ANGLE
Inch
MATERIAL:
303 Stainless Steel
1
Precision
Component
SPECIFICATIONS:
1
2

E
E
D
.313
B P.D. O.D.
B P.D. O.D.
Fig. 1
11
12
13
Fig. 2
C
Dia.
Hub
Clear.
Rad.
.667
.708
.750
.833
.2498
.2498
.2498
.2498
1.000
1.000
1.000
1.000
.669
.669
.669
.669
.394
.394
.394
.394
#2-56
#2-56
#2-56
#2-56
.445
.445
.445
.445
.917
1.083
1.125
1.250
1.333
1.417
1.583
1.750
1.958
2.083
2.167
2.417
2.583
2.750
3.000
3.083
3.833
4.250
.2498
.2498
.2498
.2498
.2498
.2498
.2498
.2498
.3747
.3747
.3747
.3747
.3747
.3747
.3747
.3747
.3747
.3747
.630
.630
.630
.630
.630
.630
.630
.630
.787
.787
.787
.787
.787
.787
.787
.787
.787
.787
.669
.669
.669
.669
.669
.669
.669
.669
.945
.945
.945
.945
.945
.945
.945
.945
.945
.945
.394
.394
.394
.394
.394
.394
.394
.394
.551
.551
.551
.551
.551
.551
.551
.551
.551
.551
#2-56
#2-56
#2-56
#2-56
#2-56
#2-56
#2-56
#2-56
#6-32
#6-32
#6-32
#6-32
#6-32
#6-32
#6-32
#6-32
#6-32
#6-32
.445
.445
.445
.445
.445
.445
.445
.445
.551
.551
.551
.551
.551
.551
.551
.551
.551
.551
No.
of
Teeth
P.D.
O.D.
S1VS24-014F2016
S1VS24-015F2016
S1VS24-016F2016
S1VS24-018F2016
14
15
16
18
.5833
.6250
.6667
.7500
S1VS24-020F1516
S1VS24-024F1516
S1VS24-025F1516
S1VS24-028F1516
S1VS24-030F1516
S1VS24-032F1516
S1VS24-036F1516
S1VS24-040F1516
S1VS24-045F1524
S1VS24-048F1524
S1VS24-050F1524
S1VS24-056F1524
S1VS24-060F1524
S1VS24-064F1524
S1VS24-070F1524
S1VS24-072F1524
S1VS24-090F1524
S1VS24-100F1524
20
24
25
28
30
32
36
40
45
48
50
56
60
64
70
72
90
100
.8333
1.0000
1.0417
1.1667
1.2500
1.3333
1.5000
1.6667
1.8750
2.0000
2.0833
2.3333
2.5000
2.6667
2.9167
3.0000
3.7500
4.1667
14
15
16
B
Bore
Catalog Number
Fig. 1
10
Fig. 2
INCH COMPONENT
.236
1-128
+.0005
-.0000
SPUR GEARS 24 PITCH

AGMA 10
1/8 FACE
1/4 BORE
20 PRESSURE ANGLE
R
Inch
MATERIAL:
1
Precision
Component
303 Stainless Steel


.375
.125
1/8
SUB DRILL
#6-32 SET SCREW
O.D.
P.D.
.500
.2498 +.0005
-.0000
INCH COMPONENT
Catalog Number
303 Stainless
Steel
2024 Aluminum
Anodized
S1066Z-024S012
S1066Z-024S015
S1066Z-024S016
S1066Z-024S018
S1066Z-024S020
S1066Z-024S021
S1066Z-024S022
S1066Z-024S024
S1066Z-024S027
S1066Z-024S030
S1066Z-024S033
S1066Z-024S036
S1066Z-024S039
S1066Z-024S042
S1066Z-024S045
S1066Z-024S048
S1066Z-024S054
S1066Z-024S060
S1066Z-024S066
S1066Z-024S069
S1066Z-024S072
S1066Z-024S075
S1066Z-024S078
S1066Z-024S081
S1066Z-024S084
S1066Z-024S087
S1066Z-024S090
S1066Z-024S093
S1066Z-024S096
S1066Z-024S099
S1066Z-024A012
S1066Z-024A015
S1066Z-024A016
S1066Z-024A018
S1066Z-024A020
S1066Z-024A021
S1066Z-024A022
S1066Z-024A024
S1066Z-024A027
S1066Z-024A030
S1066Z-024A033
S1066Z-024A036
S1066Z-024A039
S1066Z-024A042
S1066Z-024A045
S1066Z-024A048
S1066Z-024A054
S1066Z-024A060
S1066Z-024A066
S1066Z-024A069
S1066Z-024A072
S1066Z-024A075
S1066Z-024A078
S1066Z-024A081
S1066Z-024A084
S1066Z-024A087
S1066Z-024A090
S1066Z-024A093
S1066Z-024A096
S1066Z-024A099
No.
of
Teeth
P.D.
O.D.
12
15
16
18
20
21
22
24
27
30
33
36
39
42
45
48
54
60
66
69
72
75
78
81
84
87
90
93
96
99
.5000
.6250
.6667
.7500
.8333
.8750
.9167
1.0000
1.1250
1.2500
1.3750
1.5000
1.6250
1.7500
1.8750
2.0000
2.2500
2.5000
2.7500
2.8750
3.0000
3.1250
3.2500
3.3750
3.5000
3.6250
3.7500
3.8750
4.0000
4.1250
.583
.708
.750
.833
.917
.958
1.000
1.083
1.208
1.333
1.458
1.583
1.708
1.833
1.958
2.083
2.333
2.583
2.833
2.958
3.083
3.208
3.333
3.458
3.583
3.708
3.833
3.958
4.083
4.208
7
8
9
10
11
12
13
14
15
1-129
16
I
R
T
1
2
SPUR GEARS 24 PITCH

AGMA 10
3/16 FACE
3/16 BORE
20 PRESSURE ANGLE
Inch
MATERIAL:
1
Precision
Component
303 Stainless Steel

.406
.187
7/64
SUB DRILL
#4-40 SET SCREW
4
O.D.
P.D.
.375
5
.1873 +.0005
-.0000
INCH COMPONENT
Catalog Number
7
8
9
10
11
12
13
14
15
16
303 Stainless
Steel
2024 Aluminum
Anodized
S1084Z-024S010
S1084Z-024S012
S1084Z-024S014
S1084Z-024S015
S1084Z-024S016
S1084Z-024S018
S1084Z-024S020
S1084Z-024S021
S1084Z-024S022
S1084Z-024S024
S1084Z-024S028
S1084Z-024S030
S1084Z-024S032
S1084Z-024S036
S1084Z-024S042
S1084Z-024S044
S1084Z-024S048
S1084Z-024S050
S1084Z-024S054
S1084Z-024S056
S1084Z-024S060
S1084Z-024S064
S1084Z-024S068
S1084Z-024S072
S1084Z-024S078
S1084Z-024S080
S1084Z-024S084
S1084Z-024S090
S1084Z-024S096
S1084Z-024S098
S1084Z-024A010
S1084Z-024A012
S1084Z-024A014
S1084Z-024A015
S1084Z-024A016
S1084Z-024A018
S1084Z-024A020
S1084Z-024A021
S1084Z-024A022
S1084Z-024A024
S1084Z-024A028
S1084Z-024A030
S1084Z-024A032
S1084Z-024A036
S1084Z-024A042
S1084Z-024A044
S1084Z-024A048
S1084Z-024A050
S1084Z-024A054
S1084Z-024A056
S1084Z-024A060
S1084Z-024A064
S1084Z-024A068
S1084Z-024A072
S1084Z-024A078
S1084Z-024A080
S1084Z-024A084
S1084Z-024A090
S1084Z-024A096
S1084Z-024A098
No.
of
Teeth
P.D.
O.D.
10
12
14
15
16
18
20
21
22
24
28
30
32
36
42
44
48
50
54
56
60
64
68
72
78
80
84
90
96
98
.4167
.5000
.5833
.6250
.6667
.7500
.8333
.8750
.9167
1.0000
1.1667
1.2500
1.3333
1.5000
1.7500
1.8333
2.0000
2.0833
2.2500
2.3333
2.5000
2.6667
2.8333
3.0000
3.2500
3.3333
3.5000
3.7500
4.0000
4.0833
.500
.583
.667
.708
.750
.833
.917
.958
1.000
1.083
1.250
1.333
1.417
1.583
1.833
1.917
2.083
2.167
2.333
2.417
2.583
2.750
2.917
3.083
3.333
3.417
3.583
3.833
4.083
4.167
1-130
SPUR GEARS 24 PITCH

AGMA 10
3/16 FACE
1/4 BORE
20 PRESSURE ANGLE
R
Inch
MATERIAL:
1
Precision
Component
303 Stainless Steel

T
1

2
.437
.187
1/8
SUB DRILL
#6-32 SET SCREW
4
O.D.
P.D.
.500
5
.2498 +.0005
-.0000
INCH COMPONENT
Catalog Number
303 Stainless
Steel
2024 Aluminum
Anodized
S1086Z-024S012
S1086Z-024S015
S1086Z-024S016
S1086Z-024S018
S1086Z-024S020
S1086Z-024S021
S1086Z-024S022
S1086Z-024S024
S1086Z-024S027
S1086Z-024S030
S1086Z-024S033
S1086Z-024S036
S1086Z-024S039
S1086Z-024S042
S1086Z-024S045
S1086Z-024S048
S1086Z-024S051
S1086Z-024S054
S1086Z-024S060
S1086Z-024S066
S1086Z-024S069
S1086Z-024S072
S1086Z-024S075
S1086Z-024S078
S1086Z-024S081
S1086Z-024S084
S1086Z-024S087
S1086Z-024S090
S1086Z-024S093
S1086Z-024S096
S1086Z-024S099
S1086Z-024A012
S1086Z-024A015
S1086Z-024A016
S1086Z-024A018
S1086Z-024A020
S1086Z-024A021
S1086Z-024A022
S1086Z-024A024
S1086Z-024A027
S1086Z-024A030
S1086Z-024A033
S1086Z-024A036
S1086Z-024A039
S1086Z-024A042
S1086Z-024A045
S1086Z-024A048
S1086Z-024A051
S1086Z-024A054
S1086Z-024A060
S1086Z-024A066
S1086Z-024A069
S1086Z-024A072
S1086Z-024A075
S1086Z-024A078
S1086Z-024A081
S1086Z-024A084
S1086Z-024A087
S1086Z-024A090
S1086Z-024A093
S1086Z-024A096
S1086Z-024A099
No.
of
Teeth
P.D.
O.D.
12
15
16
18
20
21
22
24
27
30
33
36
39
42
45
48
51
54
60
66
69
72
75
78
81
84
87
90
93
96
99
.5000
.6250
.6667
.7500
.8333
.8750
.9167
1.0000
1.1250
1.2500
1.3750
1.5000
1.6250
1.7500
1.8750
2.0000
2.1250
2.2500
2.5000
2.7500
2.8750
3.0000
3.1250
3.2500
3.3750
3.5000
3.6250
3.7500
3.8750
4.0000
4.1250
.583
.708
.750
.833
.917
.958
1.000
1.083
1.208
1.333
1.458
1.583
1.708
1.833
1.958
2.083
2.208
2.333
2.583
2.833
2.958
3.083
3.208
3.333
3.458
3.583
3.708
3.833
3.958
4.083
4.208
1-131
7
8
9
10
11
12
13
14
15
16
SPUR GEARS 24 PITCH

1/4 FACE WIDTH
MATERIAL:
Inch
Steel
T
1
3
O.D. P.D.
B C
Catalog Number
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
1C
1C
1C
1C
1C
1C
1C
1C
1C
1C
1C
1C
1C
1C
1C
1C
1C
1C
1C
1C
1C
1C
1C
1C
1C
1C
1C
1C
1C
1C
1C
1C
1C
1C
1C
2-N24012
2-N24012A
2-N24014
2-N24015
2-N24016
2-N24018
2-N24018A
2-N24019
2-N24020
2-N24021
2-N24022
2-N24024
2-N24025
2-N24026
2-N24027
2-N24028
2-N24030
2-N24032
2-N24033
2-N24036
2-N24039
2-N24040
2-N24042
2-N24045
2-N24048
2-N24054
2-N24056
2-N24060
2-N24064
2-N24070
2-N24072
2-N24084
2-N24096
2-N24120
2-N24144
1/4
INCH COMPONENT
No.
of
Teeth
P.D.
O.D.
12
12
14
15
16
18
18
19
20
21
22
24
25
26
27
28
30
32
33
36
39
40
42
45
48
54
56
60
64
70
72
84
96
120
144
.500
.500
.583
.625
.667
.750
.750
.792
.833
.875
.917
1.000
1.042
1.083
1.125
1.167
1.250
1.333
1.375
1.500
1.625
1.667
1.750
1.875
2.000
2.250
2.333
2.500
2.667
2.917
3.000
3.500
4.000
5.000
6.000
.583
.583
.667
.708
.750
.833
.833
.875
.917
.958
1.000
1.083
1.125
1.167
1.208
1.250
1.333
1.417
1.458
1.583
1.708
1.750
1.833
1.958
2.083
2.333
2.417
2.583
2.750
3.000
3.083
3.583
4.083
5.083
6.083
B
Bore
+.0010
-.0000
.2500
.2500
.2500
.2500
.3125
.2500
.3125
.3125
.3125
.3750
.3750
.3750
.3750
.3750
.3750
.3750
.3750
.3750
.3750
.3750
.3750
.3750
.3750
.3750
.3750
.3750
.3750
.3750
.5000
.5000
.5000
.5000
.5000
.5000
.5000
E
Length
C
Hub
Dia.
D
Hub
Proj.
9/16
9/16
9/16
9/16
9/16
9/16
9/16
9/16
9/16
9/16
9/16
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
3/4
3/4
3/4
3/4
7/8
3/8
25/64
15/32
1/2
35/64
5/8
5/8
21/32
23/32
3/4
25/32
7/8
7/8
7/8
7/8
1
1
1-1/8
1-1/8
1-1/8
1-1/8
1-1/8
1-1/8
1-1/4
1-1/4
1-1/4
1-1/4
1-1/4
1-3/8
1-3/8
1-3/8
1-1/2
1-1/2
1-1/2
1-5/8
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
1/2
1/2
1/2
1/2
5/8
1-132
REV: 07.10.12 mh
6
7
8
9
10
11
12
13
14
15
16
SPUR GEARS 24 PITCH

1/4 FACE WIDTH
R
Inch
MATERIAL:
Brass
T
1
2
1/4
3
O.D. P.D.
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
1B
1B
1B
1B
1B
1B
1B
1B
1B
1B
1B
1B
1B
1B
1B
1B
1B
1B
1B
1B
1B
1B
1B
1B
1B
1B
1B
1B
1B
1B
1B
1B
1B
2-N24011
2-N24012
2-N24014
2-N24016
2-N24018
2-N24020
2-N24021
2-N24024
2-N24027
2-N24028
2-N24030
2-N24032
2-N24036
2-N24040
2-N24042
2-N24042A
2-N24044
2-N24048
2-N24052
2-N24054
2-N24056
2-N24060
2-N24066
2-N24072
2-N24080
2-N24084
2-N24096A
2-N24108A
2-N24120A
2-N24128
2-N24144A
2-N24156
2-N24168
4
5
INCH COMPONENT
Catalog Number
No.
of
Teeth
P.D.
O.D.
11
12
14
16
18
20
21
24
27
28
30
32
36
40
42
42
44
48
52
54
56
60
66
72
80
84
96
108
120
128
144
156
168
.458
.500
.583
.667
.750
.833
.875
1.000
1.125
1.167
1.250
1.333
1.500
1.667
1.750
1.750
1.833
2.000
2.167
2.250
2.333
2.500
2.750
3.000
3.333
3.500
4.000
4.500
5.000
5.333
6.000
6.500
7.000
.542
.583
.667
.750
.833
.917
.958
1.083
1.208
1.250
1.333
1.417
1.583
1.750
1.833
1.833
1.917
2.083
2.250
2.333
2.417
2.583
2.833
3.083
3.417
3.583
4.083
4.583
5.083
5.417
6.083
6.583
7.083
B
Bore
+.0010
-.0000
.1250
.1875
.1875
.1875
.1875
.2500
.2500
.2500
.2500
.2500
.2500
.2500
.2500
.2500
.3125
.3125
.3125
.3125
.3125
.3125
.3125
.3125
.3125
.3750
.3125
.3750
.3750
.3750
.3750
.3125
.3750
.3125
.5000
E
Length
C
Hub
Dia.
D
Hub
Proj.
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
9/16
9/16
9/16
9/16
9/16
9/16
9/16
9/16
9/16
9/16
9/16
5/8
5/8
5/8
9/16
3/4
11/32
3/8
7/16
1/2
1/2
1/2
1/2
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
11/16
5/8
11/16
11/16
11/16
11/16
11/16
11/16
3/4
3/4
3/4
3/4
3/4
7/8
7/8
7/8
7/8
1-1/8
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
3/8
3/8
3/8
5/16
1/2
1-133
REV: 07.11.12 mh
6
7
8
9
10
11
12
13
14
15
16
I
R

AGMA 10
3/16 FACE
3/16 & 1/4 BORE
20 PRESSURE ANGLE
MATERIAL:
SPECIFICATIONS:
2
3
4
Inch
Gear - Acetal

B Bore Ref.
C
E
.1873
.438
.453
.2498
.530
.483

pin type hubs.
INCH COMPONENT
CATALOG NUMBER
S1V8 Z-024DS
No. of
Teeth
Code
Bore Code B Bore
.1873
4
.2498
6
9
10
11
12
13
14
15
16
P.D. O.D.
#2-56
CAP SCREW
7
8
B +.0005
-.0000
5
6
1-134
1
Precision
Component
.187
No. of
Teeth Code
No. of
Teeth
P.D.
O.D.
015
016
017
018
019
020
021
022
023
024
025
028
030
032
033
036
040
042
045
046
048
050
052
055
056
057
060
064
066
069
072
078
084
090
093
15
16
17
18
19
20
21
22
23
24
25
28
30
32
33
36
40
42
45
46
48
50
52
55
56
57
60
64
66
69
72
78
84
90
93
.6250
.6667
.7083
.7500
.7917
.8333
.8750
.9167
.9583
1.0000
1.0417
1.1667
1.2500
1.3333
1.3750
1.5000
1.6667
1.7500
1.8750
1.9167
2.0000
2.0833
2.1667
2.2917
2.3333
2.3750
2.5000
2.6667
2.7500
2.8750
3.0000
3.2500
3.5000
3.7500
3.8750
.708
.750
.792
.833
.875
.917
.958
1.000
1.042
1.083
1.125
1.250
1.333
1.417
1.458
1.583
1.750
1.833
1.958
2.000
2.083
2.167
2.250
2.375
2.417
2.458
2.583
2.750
2.833
2.958
3.083
3.333
3.583
3.833
3.958

AGMA 10
3/16 FACE
3/8 BORE
20 PRESSURE ANGLE
R
Inch
MATERIAL:
1
Precision
Component
Acetal


2
3
O.D. P.D.
.3750 +.0005
-.0000
4
5
.187
INCH COMPONENT
CATALOG NUMBER
S1288Z-024D
No. of
Teeth
Code
No. of
Teeth Code
No. of
Teeth
P.D.
O.D.
015
016
017
018
019
020
021
022
023
024
025
028
030
032
033
036
040
042
045
046
048
050
052
055
056
057
060
064
066
069
072
078
084
090
093
15
16
17
18
19
20
21
22
23
24
25
28
30
32
33
36
40
42
45
46
48
50
52
55
56
57
60
64
66
69
72
78
84
90
93
.6250
.6667
.7083
.7500
.7917
.8333
.8750
.9167
.9583
1.0000
1.0417
1.1667
1.2500
1.3333
1.3750
1.5000
1.6667
1.7500
1.8750
1.9167
2.0000
2.0833
2.1667
2.2917
2.3333
2.3750
2.5000
2.6667
2.7500
2.8750
3.0000
3.2500
3.5000
3.7500
3.8750
.708
.750
.792
.833
.875
.917
.958
1.000
1.042
1.083
1.125
1.250
1.333
1.417
1.458
1.583
1.750
1.833
1.958
2.000
2.083
2.167
2.250
2.375
2.417
2.458
2.583
2.750
2.833
2.958
3.083
3.333
3.583
3.833
3.958
6
7
8
9
10
11
12
13
14
15
1-135
16
I
R
T
1
2

AGMA 10
3/16 FACE
3/16 & 1/4 BORE
20 PRESSURE ANGLE
Inch
MATERIAL:
Gear - Acetal
Fairloc hubs.
.437
1/8
3
.500
4
5
6
7
8
P.D. O.D.
SUB DRILL
INCH COMPONENT
CATALOG NUMBER
S108 Z-024DS
No. of
Teeth
Code
9
10
11
12
13
14
15
16
+.0005
B -.0000
#6-32 SET SCREW
Bore Code B Bore

.1873
4
.2498
6
1-136
1
Precision
Component
.187
No. of
Teeth Code
No. of
Teeth
P.D.
O.D.
015
016
017
018
019
020
021
022
023
024
025
028
030
032
033
036
040
042
045
046
048
050
052
055
056
057
060
064
066
069
072
078
084
090
093
15
16
17
18
19
20
21
22
23
24
25
28
30
32
33
36
40
42
45
46
48
50
52
55
56
57
60
64
66
69
72
78
84
90
93
.6250
.6667
.7083
.7500
.7917
.8333
.8750
.9167
.9583
1.0000
1.0417
1.1667
1.2500
1.3333
1.3750
1.5000
1.6667
1.7500
1.8750
1.9167
2.0000
2.0833
2.1667
2.2917
2.3333
2.3750
2.5000
2.6667
2.7500
2.8750
3.0000
3.2500
3.5000
3.7500
3.8750
.708
.750
.792
.833
.875
.917
.958
1.000
1.042
1.083
1.125
1.250
1.333
1.417
1.458
1.583
1.750
1.833
1.958
2.000
2.083
2.167
2.250
2.375
2.417
2.458
2.583
2.750
2.833
2.958
3.083
3.333
3.583
3.833
3.958
D810
D790
D787
D190
P1-137
P1-129
P1-122
P94
A 1T 2--X
P3 of 3
2-22-89
REV: 07.11.12 mh

1/4 FACE
20 PRESSURE ANGLE
MATERIAL:
Inch
Gear - Acetal
Insert - Brass
T
1
2
9/16
5/16
5/32
SUB DRILL
SET SCREW
O.D. P.D.
B C
5
1/4
INCH COMPONENT
Catalog Number
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
1T
1T
1T
1T
1T
1T
1T
1T
1T
1T
1T
1T
1T
1T
1T
1T
1T
1T
1T
1T
1T
1T
1T
1T
1T
1T
1T
1T
1T
1T
1T
1T
2-Y24012
2-Y24014
2-Y24015
2-Y24016
2-Y24017
2-Y24018
2-Y24019
2-Y24020
2-Y24021
2-Y24022
2-Y24023
2-Y24024
2-Y24025
2-Y24026
2-Y24027
2-Y24028
2-Y24030
2-Y24032
2-Y24033
2-Y24034
2-Y24036
2-Y24039
2-Y24040
2-Y24042
2-Y24044
2-Y24045
2-Y24048
2-Y24050
2-Y24052
2-Y24054
2-Y24056
2-Y24060
No.
of
Teeth
P.D.
O.D.
12
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
30
32
33
34
36
39
40
42
44
45
48
50
52
54
56
60
.500
.583
.625
.667
.708
.750
.792
.833
.875
.917
.958
1.000
1.042
1.083
1.125
1.167
1.250
1.333
1.375
1.417
1.500
1.625
1.667
1.750
1.833
1.875
2.000
2.083
2.167
2.250
2.333
2.500
.583
.667
.708
.750
.792
.833
.875
.917
.958
1.000
1.042
1.083
1.125
1.167
1.208
1.250
1.333
1.417
1.458
1.500
1.583
1.708
1.750
1.833
1.917
1.958
2.083
2.167
2.250
2.333
2.417
2.583
B
Bore
+.0010
-.0000
.1875
.1875
.1875
.1875
.1875
.1875
.1875
.1875
.1875
.1875
.1875
.2500
.2500
.2500
.2500
.2500
.2500
.2500
.2500
.2500
.2500
.3125
.3125
.3125
.3125
.3125
.3125
.3125
.3125
.3125
.3125
.3125
C
Hub
Dia.
Set
Screw
Type
3/8
7/16
31/64
31/64
35/64
35/64
35/64
35/64
35/64
35/64
35/64
5/8
39/64
5/8
5/8
5/8
5/8
39/64
39/64
39/64
5/8
43/64
43/64
43/64
43/64
43/64
43/64
43/64
43/64
43/64
43/64
43/64
#4-40
#4-40
#4-40
#4-40
#4-40
#4-40
#4-40
#4-40
#4-40
#4-40
#4-40
#6-32
#6-32
#6-32
#6-32
#6-32
#6-32
#6-32
#6-32
#6-32
#6-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
Plain
Plain
Plain
Plain
Plain
Plain
Plain
Plain
Plain
Plain
Plain
Plain
Web
Web
Web
Web
Web
Web
Web
Web
Web
Web
Web
Web
Web
Web
Web
Web
Web
Web
Web
Web
1-137
REV: 07.18.12 mh
7
8
9
10
11
12
13
14
15
16

1/4 FACE
20 PRESSURE ANGLE
MATERIAL:
Inch
Acetal
Discounts available on
T
1
9/16
2
3
O.D. P.D.
4
5
5/16
1/4
INCH COMPONENT
Catalog Number
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
*A
A
A
A
A
A
A
A
A
A
A
A
1M
1M
1M
1M
1M
1M
1M
1M
1M
1M
1M
1M
1M
1M
1M
1M
1M
1M
1M
1M
1M
1M
1M
1M
1M
1M
1M
1M
1M
1M
1M
1M
1M
2-Y24012
2-Y24014
2-Y24015
2-Y24016
2-Y24017
2-Y24018
2-Y24019
2-Y24020
2-Y24021
2-Y24022
2-Y24023
2-Y24024
2-Y24025
2-Y24026
2-Y24027
2-Y24028
2-Y24030
2-Y24032
2-Y24033
2-Y24034
2-Y24036
2-Y24036A
2-Y24039
2-Y24040
2-Y24042
2-Y24044
2-Y24045
2-Y24048
2-Y24050
2-Y24052
2-Y24054
2-Y24056
2-Y24060
* Color: Gray
REV: 07.11.12 mh
No.
of
Teeth
P.D.
O.D.
12
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
30
32
33
34
36
36
39
40
42
44
45
48
50
52
54
56
60
.500
.583
.625
.667
.708
.750
.792
.833
.875
.917
.958
1.000
1.042
1.083
1.125
1.167
1.250
1.333
1.375
1.417
1.500
1.500
1.625
1.667
1.750
1.833
1.875
2.000
2.083
2.167
2.250
2.333
2.500
.583
.667
.708
.750
.792
.833
.875
.917
.958
1.000
1.042
1.083
1.125
1.167
1.208
1.250
1.333
1.417
1.458
1.500
1.583
1.583
1.708
1.750
1.833
1.917
1.958
2.083
2.167
2.250
2.333
2.417
2.583
B
Bore
+.0010
-.0020
.1875
.1875
.1875
.1875
.1875
.1875
.1875
.1875
.1875
.1875
.1875
.2500
.2500
.2500
.2500
.2500
.2500
.2500
.2500
.2500
.2500
.2500
.3125
.3125
.3125
.3125
.3125
.3125
.3125
.3125
.3125
.3125
.3125
C
Hub
Dia.
Type
3/8
7/16
31/64
31/64
35/64
35/64
35/64
35/64
35/64
35/64
35/64
5/8
39/64
5/8
5/8
5/8
5/8
39/64
39/64
39/64
39/64
39/64
43/64
43/64
43/64
43/64
43/64
43/64
43/64
43/64
43/64
43/64
43/64
Plain
Plain
Plain
Plain
Plain
Plain
Plain
Plain
Plain
Plain
Web
Web
Web
Web
Web
Web
Web
Web
Web
Web
Web
Web
Web
Web
Web
Web
Web
Web
Web
Web
Web
Web
Web
1-138
7
8
9
10
11
12
13
14
15
16

14-1/2 & 20 PRESSURE ANGLE
MATERIAL:
Nylon 101
Inch
T
1
2
O.D. P.D.
O.D. P.D.
3
4
F
Fig. 1
Fig. 2
INCH COMPONENT
Catalog Number
Fig. 1 14-1/2 Pressure Angle
A 1N 1-N24036
A 1N 1-N24015
Fig. 2 14-1/2 Pressure Angle
A 1N 2-N24012
A 1N 2-N24018
* A 1N 2-N24024
A 1N 2-N24084
Fig. 2 20 Pressure Angle
A 1N 2-Y24018
A 1N 2-Y24021
A 1N 2-Y24036
No.
of
Teeth
P.D.
O.D.
Ref.
B
Bore
F
Face
Width
C
Hub
Dia.
D
Hub
Proj.
15
36
.625
1.500
.71
1.58
7/32
3/32
.58
.83
1.08
3.58
1/4
1/4
1/4
1/4
1/4
1/4
3/8
12
18
24
84
.500
.750
1.000
3.500
5/16
1/4
1/4
5/16
3/8
1/2
5/8
27/32
1/4
3/16
3/8
1/4
18
21
36
.750
.875
1.500
.83
.96
1.58
.304
1/8
.310
1/4
1/4
3/8
1/2
1/2
.738
1/8
5/16
1/4
* 84 teeth gear has six 5/8 diameter lightening holes on a 1.95 diameter circle.
6
7
8
9
10
11
12
13
14
15
1-139
16
I
R
T
1
2

AGMA 10
1/8 FACE
1/4 BORE
20 PRESSURE ANGLE
Inch
MATERIAL:
1
Precision
Component
303 Stainless Steel

.406
.125
.250
.2498 +.0005
-.0000
.312 +.000
-.003
3/8
O.D. P.D.
5
6
FOR CLAMPS
SEE INDEX
INCH COMPONENT
7
8
9
10
11
12
13
Catalog Number
303 Stainless
Steel
2024 Aluminum
Anodized
S1166Z-024S012
S1166Z-024S015
S1166Z-024S016
S1166Z-024S018
S1166Z-024S020
S1166Z-024S022
S1166Z-024S024
S1166Z-024S030
S1166Z-024S036
S1166Z-024S039
S1166Z-024S042
S1166Z-024S045
S1166Z-024S048
S1166Z-024S054
S1166Z-024S060
S1166Z-024S066
S1166Z-024S072
S1166Z-024S075
S1166Z-024S081
S1166Z-024S084
S1166Z-024S090
S1166Z-024S096
S1166Z-024A012
S1166Z-024A015
S1166Z-024A016
S1166Z-024A018
S1166Z-024A020
S1166Z-024A022
S1166Z-024A024
S1166Z-024A030
S1166Z-024A036
S1166Z-024A039
S1166Z-024A042
S1166Z-024A045
S1166Z-024A048
S1166Z-024A054
S1166Z-024A060
S1166Z-024A066
S1166Z-024A072
S1166Z-024A075
S1166Z-024A081
S1166Z-024A084
S1166Z-024A090
S1166Z-024A096
14
15
16
1-140
No.
of
Teeth
P.D.
O.D.
12
15
16
18
20
22
24
30
36
39
42
45
48
54
60
66
72
75
81
84
90
96
.5000
.6250
.6667
.7500
.8333
.9167
1.0000
1.2500
1.5000
1.6250
1.7500
1.8750
2.0000
2.2500
2.5000
2.7500
3.0000
3.1250
3.3750
3.5000
3.7500
4.0000
.583
.708
.750
.833
.917
1.000
1.083
1.333
1.583
1.708
1.833
1.958
2.083
2.333
2.583
2.833
3.083
3.208
3.458
3.583
3.833
4.083

AGMA 10
1/8 FACE
3/8 BORE
20 PRESSURE ANGLE
R
Inch
MATERIAL:
1
Precision
Component
303 Stainless Steel

T
1

All gears over 2-1/8" Dia. supplied with lightening holes.

See Index for hubs.
B
(8 PLACES)
4
.3750 +.0000
-.0002
O.D. P.D. C
5
6
.125
INCH COMPONENT
Catalog Number
303 Stainless
Steel
2024 Aluminum
Anodized
S1268Z-024S015
S1268Z-024S018
S1268Z-024S020
S1268Z-024S021
S1268Z-024S024
S1268Z-024S025
S1268Z-024S026
S1268Z-024S028
S1268Z-024S030
S1268Z-024S032
S1268Z-024S036
S1268Z-024S040
S1268Z-024S042
S1268Z-024S045
S1268Z-024S046
S1268Z-024S048
S1268Z-024S050
S1268Z-024S052
S1268Z-024S056
S1268Z-024S060
S1268Z-024S064
S1268Z-024S066
S1268Z-024S070
S1268Z-024S072
S1268Z-024S078
S1268Z-024S084
S1268Z-024S090
S1268Z-024S096
S1268Z-024S099
S1268Z-024A015
S1268Z-024A018
S1268Z-024A020
S1268Z-024A021
S1268Z-024A024
S1268Z-024A025
S1268Z-024A026
S1268Z-024A028
S1268Z-024A030
S1268Z-024A032
S1268Z-024A036
S1268Z-024A040
S1268Z-024A042
S1268Z-024A045
S1268Z-024A046
S1268Z-024A048
S1268Z-024A050
S1268Z-024A052
S1268Z-024A056
S1268Z-024A060
S1268Z-024A064
S1268Z-024A066
S1268Z-024A070
S1268Z-024A072
S1268Z-024A078
S1268Z-024A084
S1268Z-024A090
S1268Z-024A096
S1268Z-024A099
No.
of
Teeth
P.D.
O.D.
B
Dia.
C
Dia.
15
18
20
21
24
25
26
28
30
32
36
40
42
45
46
48
50
52
56
60
64
66
70
72
78
84
90
96
99
.6250
.7500
.8333
.8750
1.0000
1.0417
1.0833
1.1667
1.2500
1.3333
1.5000
1.6667
1.7500
1.8750
1.9167
2.0000
2.0833
2.1667
2.3333
2.5000
2.6667
2.7500
2.9167
3.0000
3.2500
3.5000
3.7500
4.0000
4.1250
.708
.833
.917
.958
1.083
1.125
1.167
1.250
1.333
1.417
1.583
1.750
1.833
1.958
2.000
2.083
2.167
2.250
2.417
2.583
2.750
2.833
3.000
3.083
3.333
3.583
3.833
4.083
4.208
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
1/2
1/2
1/2
1/2
1/2
1-3/8
1-3/8
1-3/8
1-3/8
1-3/4
1-3/4
1-3/4
1-3/4
2
2
2-1/4
2-1/4
2-1/2
1-141
7
8
9
10
11
12
13
14
15
16
D810
D790
D787
D190
P1-142
P1-134
P1-127
P85
A 1C 1--X
P2 of 3
2-15-89
REV: 7.17.12 JF

1/4 FACE WIDTH
R
Inch
MATERIAL:
Steel
For large quantity orders,

discount available.
T
1
2
1/4
3
4
P.D.
O.D.
5
6
INCH COMPONENT
Catalog Number
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
1C
1C
1C
1C
1C
1C
1C
1C
1C
1C
1C
1C
1C
1C
1C
1C
1C
1C
1C
1C
1C
1C
1C
1C
1C
1C
1C
1C
1C
1C
1-N24012
1-N24014
1-N24015
1-N24016
1-N24016A
1-N24018
1-N24018A
1-N24020
1-N24021
1-N24021A
1-N24022
1-N24024
1-N24024A
1-N24028
1-N24030
1-N24032
1-N24036
1-N24036A
1-N24040
1-N24042
1-N24044
1-N24045
1-N24048
1-N24048A
1-N24054
1-N24056
1-N24060
1-N24064
1-N24066
1-N24072
No.
of
Teeth
P.D.
O.D.
12
14
15
16
16
18
18
20
21
21
22
24
24
28
30
32
36
36
40
42
44
45
48
48
54
56
60
64
66
72
.500
.583
.625
.667
.667
.750
.750
.833
.875
.875
.917
1.000
1.000
1.167
1.250
1.333
1.500
1.500
1.667
1.750
1.833
1.875
2.000
2.000
2.250
2.333
2.500
2.667
2.750
3.000
.583
.667
.708
.750
.750
.833
.833
.917
.958
.958
1.000
1.083
1.083
1.250
1.333
1.417
1.583
1.583
1.750
1.833
1.917
1.958
2.083
2.083
2.333
2.417
2.583
2.750
2.833
3.083
B
Bore
+.0010
-.0000
.2500
.2500
.2500
.2500
.3125
.2500
.3125
.2500
.2500
.3750
.2500
.3750
.5000
.3750
.5000
.3750
.3750
.5000
.5000
.5000
.5000
.3750
.3750
.5000
.3750
.5000
.5000
.5000
.5000
.5000
1-142
REV: 07.18.12 mh
7
8
9
10
11
12
13
14
15
16

1/4 FACE WIDTH
R
Inch
MATERIAL:
Brass

T
1
1/4
2
B
P.D.
O.D.
4
5
INCH COMPONENT
Catalog Number
A
A
A
A
A
A
A
A
A
A
A
1B
1B
1B
1B
1B
1B
1B
1B
1B
1B
1B
1-N24008
1-N24009
1-N24010
1-N24011
1-N24012
1-N24014
1-N24015
1-N24016
1-N24018
1-N24020
1-N24024
No.
of
Teeth
P.D.
O.D.
8
9
10
11
12
14
15
16
18
20
24
.333
.375
.417
.458
.500
.583
.625
.667
.750
.833
1.000
.417
.458
.500
.542
.583
.667
.708
.750
.833
.917
1.083
B
Bore
+.0010
-.0000
.1250
.1250
.1250
.1875
.1875
.1875
.1875
.1875
.1875
.1875
.1875
6
7
8
9
10
11
12
13
14
15
1-143
REV: 07.10.12 mh
16
I
R

AGMA 9
1/4 & 3/8 FACE
3/8 & 1/2 BORE
20 PRESSURE ANGLE
MATERIAL:
FEATURES:
2
3
4
5
Inch
1
Precision
Component

Self-lubricating
Quiet operation
Integral metal core
Lightweight
Shock-absorbent
Non-corrodible
FW

B +.0005
-.0000

6
7
8
INCH COMPONENT
CATALOG NUMBER
S12
Z-024PC
FW Face Width
No. of
Teeth
Code
.250 A
.375 C
B Bore Size
10
11
12
.3748
*.4998

Example:
S12A8Z-024PC064 is a .250 Face, .3748 Bore,
13
14
15
16
1-144
No.
No. of
of
Teeth Code Teeth
024
030
032
036
048
060
064
072
096
24
30
32
36
48
60
64
72
96
P.D.
O.D.
D
Core
Dia.
1.0000
1.2500
1.3333
1.5000
2.0000
2.5000
2.6666
3.0000
4.0000
1.083
1.333
1.417
1.583
2.083
2.583
2.750
3.083
4.083
.630
.787
.787
.984
1.181
1.378
1.378
1.575
1.969

AGMA 10
1/8 FACE
3/8 BORE
20 PRESSURE ANGLE
R
Inch
MATERIAL:
1
Precision
Component

Rim - Acetal
T
1

bore and/or materials.
See Index for hubs.
2
3
B
(8 PLACES)
4
O.D. P.D.
.3750 +.0000
-.0002
5
6
.125
INCH COMPONENT
Catalog Number
No.
of
Teeth
P.D.
O.D.
A
Dia.
B
Dia.
C
Dia.
S1268Z-024M024
S1268Z-024M025
S1268Z-024M030
S1268Z-024M032
S1268Z-024M035
S1268Z-024M036
S1268Z-024M040
S1268Z-024M042
S1268Z-024M048
S1268Z-024M055
S1268Z-024M060
S1268Z-024M065
S1268Z-024M072
S1268Z-024M084
S1268Z-024M096
24
25
30
32
35
36
40
42
48
55
60
65
72
84
96
1.0000
1.0417
1.2500
1.3333
1.4583
1.5000
1.6667
1.7500
2.0000
2.2917
2.5000
2.7083
3.0000
3.5000
4.0000
1.083
1.125
1.333
1.417
1.542
1.583
1.750
1.833
2.083
2.375
2.583
2.792
3.083
3.583
4.083
5/8
7/8
7/8
1-1/8
1-1/8
1-1/8
1-3/8
1-3/8
1-5/8
2-1/8
2-1/8
2-3/8
2-5/8
3-1/8
3-5/8
7/32
3/8
3/8
3/8
3/8
3/8
3/8
13/16
1-3/8
1-3/8
1-3/8
1-3/4
1-3/4
1-3/4
8
9
10
11
12
13
14
15
1-145
16
I
R

AGMA 9
3/8 & 1/2 FACE
3/8 & 1/2 BORE
20 PRESSURE ANGLE
MATERIAL:
FEATURES:
2
3
4
5
Inch
1
Precision
Component

Self-lubricating
Quiet operation
Integral metal core
Lightweight
Shock-absorbent
Non-corrodible
FW

B +.0005
-.0000
6
7
8
INCH COMPONENT
CATALOG NUMBER
S12
Z-016PC
FW Face Width
No. of
Teeth
Code
.375 C
9
10
11
12
.500 E
B Bore Size
.3748
*.4998

Example:
S12C8Z-016PC032 is a .375 Face, .3748 Bore,
13
14
15
16
1-146
No.
No. of
of
Teeth Code Teeth
020
024
028
030
032
036
20
24
28
30
32
36
P.D.
O.D.
D
Core
Dia.
1.2500
1.5000
1.7500
1.8750
2.0000
2.2500
1.375
1.625
1.875
2.000
2.125
2.375
.630
.984
.984
1.181
1.181
1.378

14-1/2 & 20 PRESSURE ANGLE
MATERIAL:
Nylon 101
Inch
T
1
2
3
A 1N 2-Y16076
A 1N 2-Y16080
A 1N 2-N16042
A 1N 2-N16036
A
A
A
A
A
1N
1N
1N
1N
1N
2-N16012 A 1N 2-Y16016
2-N16020
2-N16030
2-Y16030
2-Y16034
4
5
6
O.D. P.D.
7
8
D
F
INCH COMPONENT
Catalog Number
14-1/2 Pressure Angle
A 1N 2-N16012
A 1N 2-N16020
A 1N 2-N16030
A 1N 2-N16036
* A 1N 2-N16042
20 Pressure Angle
** A 1N 2-Y16016
A 1N 2-Y16030
A 1N 2-Y16034
A 1N 2-Y16076
A 1N 2-Y16080
No.
of
Teeth
P.D.
O.D.
Ref.
B
Bore
F
Face
Width
C
Hub
Dia.
D
Hub
Proj.
12
20
30
36
42
.750
1.250
1.875
2.250
2.625
.88
1.38
2.00
2.38
2.75
1/4
1/2
63/64
3/8
13/32
.22
.30
.87
.32
.62
7/16
7/8
1-5/8
3/4
1-3/8
1/32
1/2
1/2
3/8
1/4
16
30
34
76
80
1.000
1.875
2.125
4.750
5.000
1.13
2.00
2.25
4.88
5.13
1/4
1/4
23/64
1/2
1/2
3/8
3/8
3/8
3/8
3/8
3/4
1
1
7/8
7/8
5/16
19/64
33/64
1/4
1/4
* Has 1/8 wide keyway and recessed web.

** Has .10 wide recess 9/32 deep on side opposite hub.
Available only in glass-filled acetal material. Hub Projection D has a 1/4 extension on each side and has spoked web.
Has three 3/16 diameter holes on a 21/32 radius bolt circle. There is an additional hub on the opposite side that is 3/4
diameter with a 1/8 hub projection from face, and has web .10 deep.
REV: 12.6.2011 JC
1-147
10
11
12
13
14
15
16
I
R
T
1
FAIRLOC HUB ANTI-BACKLASH GEARS 120 PITCH

AGMA 10
.104 FACE
20 PRESSURE ANGLE
Inch
MATERIAL:
Gears - 303 Stainless Steel

2024 Aluminum
T4 or T351 Alloy, Anodized before cutting
Hubs - 303 Stainless Steel
Springs - 302 Stainless Steel, Spring Temper

bore size, passivation for Stainless Steel.
Fairloc hubs require controlled shaft tolerances.

Suggested clearance fit between the bore and the
shaft is .0001/.0008
4
.385
.104
5
6
.53
7
8
9
.1248 (1/8)
3
6
Material Code - Gears

303 Stainless Steel
12
No. of
Teeth
Code
.1873 (3/16) 4
.2498 (1/4)
11
2024 Aluminum
T4 or T351 Alloy,
Anodized before cutting A
13
14
Example:
S1A56A-F120A200 is an Aluminum Anti-Backlash
Gear with 200 Teeth and .2498 Bore Fairloc Hub.
15
16
B +.0005
-.0000
FAIRLOC HUB CLEARANCE

RADIUS .31 MAX.
B Bore Code
10
P.D. O.D.
INCH COMPONENT
CATALOG NUMBER
S1A5 A-F120
1-148
1
Precision
Component
No.
No. of
of
Teeth Code Teeth
160
170
180
190
200
210
220
230
240
250
260
270
280
290
300
310
320
330
340
350
360
160
170
180
190
200
210
220
230
240
250
260
270
280
290
300
310
320
330
340
350
360
P.D.
O.D.
1.3333
1.4167
1.5000
1.5833
1.6667
1.7500
1.8333
1.9167
2.0000
2.0833
2.1667
2.2500
2.3333
2.4167
2.5000
2.5833
2.6667
2.7500
2.8333
2.9167
3.0000
1.350
1.433
1.517
1.600
1.683
1.767
1.850
1.933
2.017
2.100
2.183
2.267
2.350
2.433
2.517
2.600
2.683
2.767
2.850
2.933
3.017
ANTI-BACKLASH GEARS 120 PITCH

AGMA 10
.104 FACE
1/8, 3/16 & 1/4 BORE
20 PRESSURE ANGLE
R
Inch
MATERIAL:
1
Precision
Component

2024 Aluminum
HUB STYLE: PIN OR CLAMP TYPE

H
B Bore
Pin Type
Selection
Code
Size
Dia.
Code
3
4
6
.1248 (1/8)
.1873 (3/16)
.2498 (1/4)
2
4
6
1
2
C
Clamp Type
Dia.
Code
3
5
7
.312
.375
.437
.187
.250
.312

.325
.325
.104
.104
SUB
DRILL
+.0005
+.000
.1248 (1/8)
No. of
Teeth
Code
.1873 (3/16) 4
.2498 (1/4)
Hub Style Code (See above)

Pin Type
2, 4 or 6
Clamp Type 3, 5 or 7
303 Stainless Steel
2024 Aluminum
T4 or T351 Alloy,
Example:
S9703A-Z3J200-P is a Stainless Steel Clamp Type
Anti-Backlash Gear with 200 Teeth and .1248 Bore.
Clamp Type
No.
No. of
of
Teeth Code Teeth
160
170
180
190
200
210
220
230
240
250
260
270
280
290
300
310
320
330
340
350
360
160
170
180
190
200
210
220
230
240
250
260
270
280
290
300
310
320
330
340
350
360
6
7
FOR CLAMPS
SEE INDEX
Pin Type
P.D. O.D.
C -.003
SET SCREW
SUPPLIED
INCH COMPONENT
CATALOG NUMBER
S970 A-Z J
B -.0000
B Bore Code
P.D.
O.D.
1.3333
1.4167
1.5000
1.5833
1.6667
1.7500
1.8333
1.9167
2.0000
2.0833
2.1667
2.2500
2.3333
2.4167
2.5000
2.5833
2.6667
2.7500
2.8333
2.9167
3.0000
1.350
1.433
1.517
1.600
1.683
1.767
1.850
1.933
2.017
2.100
2.183
2.267
2.350
2.433
2.517
2.600
2.683
2.767
2.850
2.933
3.017
8
9
10
11
12
13
14
15
1-149
16
I
R
T
1
2
3
4
5

AGMA 10
.104 FACE
1/8, 3/16 & 1/4 BORE
20 PRESSURE ANGLE
Inch
MATERIAL:

2024 Aluminum

B Bore
Selection
Code
Size
3
4
6
.1248 (1/8)
.1873 (3/16)
.2498 (1/4)
H
Pin Type
Dia.
Code
C
Clamp Type
Dia.
Code
.31
.37
.50
P
P
P
.188
.250
.312
C
C
C

.385
.385
.104
.104
SUB
DRILL
SET SCREW
SUPPLIED
+.0005
B -.0000
+.000
INCH COMPONENT
CATALOG NUMBER
S1A5 A- 120
B Bore Code
10
.1248 (1/8)
.1873 (3/16) 4
.2498 (1/4)
11
No. of
Teeth
Code

Pin Type
Clamp Type C
12

303 Stainless Steel
13
14
Example:
S1A53A-C120S200 is a Stainless Steel Clamp Type
15
16
2024 Aluminum
T4 or T351 Alloy,
1-150
P.D. O.D.
C -.003
FOR CLAMPS
SEE INDEX
1/8
Pin Type
1
Precision
Component
Clamp Type
No.
No. of
of
Teeth Code Teeth
160
165
170
175
180
185
190
195
200
210
220
230
240
250
260
270
280
290
300
310
320
360
160
165
170
175
180
185
190
195
200
210
220
230
240
250
260
270
280
290
300
310
320
360
P.D.
O.D.
1.3333
1.3750
1.4167
1.4583
1.5000
1.5417
1.5833
1.6250
1.6667
1.7500
1.8333
1.9167
2.0000
2.0833
2.1667
2.2500
2.3333
2.4167
2.5000
2.5833
2.6667
3.0000
1.350
1.392
1.433
1.475
1.517
1.558
1.600
1.642
1.683
1.767
1.850
1.933
2.017
2.100
2.183
2.267
2.350
2.433
2.517
2.600
2.683
3.017

AGMA 10
.104 FACE
20 PRESSURE ANGLE
R
Inch
MATERIAL:

2024 Aluminum
1
Precision
Component
T
1


shaft is .0001/.0008
3
4
.385
.104
.53
P.D. O.D.
B +.0005
-.0000

RADIUS .31 MAX.
INCH COMPONENT
CATALOG NUMBER
S1A5 A-F096
B Bore Code
.1248 (1/8)
No. of
Teeth
Code
.1873 (3/16) 4
.2498 (1/4)

303 Stainless Steel
2024 Aluminum
T4 or T351 Alloy,
Example:
S1A53A-F096S180 is a Stainless Steel AntiBacklash Gear with 180 Teeth and .1248 Bore
Fairloc Hub.
5
6
7
8
No.
No. of
of
Teeth Code Teeth
130
135
140
144
145
150
160
170
180
190
192
200
210
220
230
240
250
260
270
288
130
135
140
144
145
150
160
170
180
190
192
200
210
220
230
240
250
260
270
288
P.D.
O.D.
1.3542
1.4063
1.4583
1.5000
1.5104
1.5625
1.6667
1.7708
1.8750
1.9792
2.0000
2.0833
2.1875
2.2917
2.3958
2.5000
2.6042
2.7083
2.8125
3.0000
1.375
1.427
1.479
1.521
1.531
1.583
1.688
1.792
1.896
2.000
2.021
2.104
2.208
2.313
2.417
2.521
2.625
2.729
2.833
3.021
9
10
11
12
13
14
15
1-151
16
I
R
T
1
2
3
4
5

AGMA 10
.104 FACE
1/8, 3/16 & 1/4 BORE
20 PRESSURE ANGLE
Inch
MATERIAL:

2024 Aluminum

B Bore
Selection
Code
Size
3
4
6
.1248 (1/8)
.1873 (3/16)
.2498 (1/4)
H
Pin Type
Dia.
Code
2
4
6
C
Clamp Type
Dia.
Code
.312
.375
.437
.187
.250
.312
3
5
7

.325
.325
.104
.104
SUB
DRILL
+.0005
B -.0000
+.000
FOR CLAMPS
SEE INDEX
Pin Type
INCH COMPONENT
CATALOG NUMBER
S970 A-Z H
B Bore Code
10
.1248 (1/8)
11
No. of
Teeth
Code
.1873 (3/16) 4
.2498 (1/4)

Pin Type
2, 4 or 6
12

303 Stainless Steel
13
14
Example:
S9703A-Z2H144AP is an Aluminum Pin Type
15
16
2024 Aluminum
T4 or T351 Alloy,
1-152
P.D. O.D.
C -.003
SET SCREW
SUPPLIED
7
8
1
Precision
Component
Clamp Type
No.
No. of
of
Teeth Code Teeth
130
135
140
144
145
150
160
170
180
190
192
200
210
220
230
240
250
260
270
288
130
135
140
144
145
150
160
170
180
190
192
200
210
220
230
240
250
260
270
288
P.D.
O.D.
1.3542
1.4063
1.4583
1.5000
1.5104
1.5625
1.6667
1.7708
1.8750
1.9792
2.0000
2.0833
2.1875
2.2917
2.3958
2.5000
2.6042
2.7083
2.8125
3.0000
1.375
1.427
1.479
1.521
1.531
1.583
1.688
1.792
1.896
2.000
2.021
2.104
2.208
2.313
2.417
2.521
2.625
2.729
2.833
3.021

AGMA 10
.104 FACE
1/8, 3/16 & 1/4 BORE
20 PRESSURE ANGLE
R
Inch
MATERIAL:
1
Precision
Component

2024 Aluminum

B Bore
Selection
Code
Size
3
4
6
.1248 (1/8)
.1873 (3/16)
.2498 (1/4)
H
Pin Type
Dia.
Code
C
Clamp Type
Dia.
Code
.31
.37
.50
P
P
P
C
C
C
.188
.250
.312

14-1/2P.A., teeth not listed, different
.385
.385
.104
.104
SUB
DRILL
SET SCREW
SUPPLIED
+.000
.1248 (1/8)
No. of
Teeth
Code
.1873 (3/16) 4
.2498 (1/4)

Pin Type
Clamp Type C
303 Stainless Steel
2024 Aluminum
T4 or T351 Alloy,
Example:
S1A53A-P096S170 is a Stainless Steel Pin Type
P.D. O.D.
C -.003
FOR CLAMPS
SEE INDEX
1/8
Pin Type
INCH COMPONENT
CATALOG NUMBER
S1A5 A- 096
+.0005
B -.0000
B Bore Code
6
7
Clamp Type
8
No.
No. of
of
Teeth Code Teeth
130
135
140
144
145
150
155
160
170
175
180
190
192
200
210
220
230
240
250
260
264
288
130
135
140
144
145
150
155
160
170
175
180
190
192
200
210
220
230
240
250
260
264
288
P.D.
O.D.
1.3542
1.4063
1.4583
1.5000
1.5104
1.5625
1.6146
1.6667
1.7708
1.8229
1.8750
1.9792
2.0000
2.0833
2.1875
2.2917
2.3958
2.5000
2.6042
2.7083
2.7500
3.0000
1.375
1.427
1.479
1.521
1.531
1.583
1.635
1.688
1.792
1.844
1.896
2.000
2.021
2.104
2.208
2.313
2.417
2.521
2.625
2.729
2.771
3.021
9
10
11
12
13
14
15
1-153
16
I
R
T
1
2
3
4
5

AGMA 10
.104 FACE
1/8, 3/16 & 1/4 BORE
20 PRESSURE ANGLE
Inch
MATERIAL:

2024 Aluminum

B Bore
Selection
Code
Size
3
4
6
.1248 (1/8)
.1873 (3/16)
.2498 (1/4)
H
Pin Type
Dia.
Code
2
4
6
C
Clamp Type
Dia.
Code
.312
.375
.437

.325
SUB
DRILL
INCH COMPONENT
CATALOG NUMBER
S970 A-Z G
.1248 (1/8)
No. of
Teeth
Code
.1873 (3/16) 4
6

Pin Type
12
2, 4 or 6
303 Stainless Steel
2024 Aluminum
T4 or T351 Alloy,
13
Example:
S9703A-Z3G120-P is a Stainless Steel Clamp Type
15
16
+.000
1-154
P.D. O.D.
C -.003
FOR CLAMPS
SEE INDEX
Pin Type
14
+.0005
SET SCREW
SUPPLIED
.2498 (1/4)
11
.104
B -.0000
B Bore Code
10
.325
.104
.187
.250
.312
3
5
7
1
Precision
Component
Clamp Type
No.
No. of
of
Teeth Code Teeth
100
105
110
115
120
125
130
135
140
145
150
160
170
180
190
200
220
240
100
105
110
115
120
125
130
135
140
145
150
160
170
180
190
200
220
240
P.D.
O.D.
1.2500
1.3125
1.3750
1.4375
1.5000
1.5625
1.6250
1.6875
1.7500
1.8125
1.8750
2.0000
2.1250
2.2500
2.3750
2.5000
2.7500
3.0000
1.275
1.338
1.400
1.463
1.525
1.588
1.650
1.713
1.775
1.838
1.900
2.025
2.150
2.275
2.400
2.525
2.775
3.025

AGMA 10
.104 FACE
1/8, 3/16 & 1/4 BORE
20 PRESSURE ANGLE
R
Inch
MATERIAL:
1
Precision
Component

2024 Aluminum

B Bore
Selection
Code
Size
3
4
6
.1248 (1/8)
.1873 (3/16)
.2498 (1/4)
H
Pin Type
Dia.
Code
C
Clamp Type
Dia.
Code
.31
.37
.50
P
P
P
C
C
C
.188
.250
.312

.385
.385
.104
.104
SUB
DRILL
+.0005
+.000
No. of
Teeth
Code
.1873 (3/16) 4
.2498 (1/4)

Pin Type
Clamp Type C
303 Stainless Steel
2024 Aluminum
T4 or T351 Alloy,
Example:
No.
No. of
of
Teeth Code Teeth
100
105
110
115
120
125
130
135
140
145
150
155
160
165
170
175
180
185
190
200
220
240
100
105
110
115
120
125
130
135
140
145
150
155
160
165
170
175
180
185
190
200
220
240
6
7
FOR CLAMPS
SEE INDEX
1/8
Pin Type
.1248 (1/8)
P.D. O.D.
C -.003
SET SCREW
SUPPLIED
INCH COMPONENT
CATALOG NUMBER
S1A5 A- 080
B -.0000
B Bore Code
Clamp Type
P.D.
O.D.
1.2500
1.3125
1.3750
1.4375
1.5000
1.5625
1.6250
1.6875
1.7500
1.8125
1.8750
1.9375
2.0000
2.0625
2.1250
2.1875
2.2500
2.3125
2.3750
2.5000
2.7500
3.0000
1.275
1.338
1.400
1.463
1.525
1.588
1.650
1.713
1.775
1.838
1.900
1.963
2.025
2.088
2.150
2.213
2.275
2.338
2.400
2.525
2.775
3.025
8
9
10
11
12
13
14
15
1-155
16
I
R
T
1

AGMA 10
.104 FACE
20 PRESSURE ANGLE
Inch
MATERIAL:

2024 Aluminum


shaft is .0001/.0008
4
.385
.104
5
6
.53
7
8
9
.1248 (1/8)
3
6

303 Stainless Steel
12
No. of
Teeth
Code
.1873 (3/16) 4
.2498 (1/4)
11
2024 Aluminum
T4 or T351 Alloy,
13
14
Example:
15
16
B +.0005
-.0000

RADIUS .31 MAX.
B Bore Code
10
P.D. O.D.
INCH COMPONENT
CATALOG NUMBER
S1A5 A-F072
1-156
1
Precision
Component
No.
No. of
of
Teeth Code Teeth
100
105
108
110
115
120
125
130
140
144
150
160
170
180
190
200
210
216
220
100
105
108
110
115
120
125
130
140
144
150
160
170
180
190
200
210
216
220
P.D.
O.D.
1.3889
1.4583
1.5000
1.5278
1.5972
1.6667
1.7361
1.8056
1.9444
2.0000
2.0833
2.2222
2.3611
2.5000
2.6389
2.7778
2.9167
3.0000
3.0556
1.417
1.486
1.528
1.556
1.625
1.694
1.764
1.833
1.972
2.028
2.111
2.250
2.389
2.528
2.667
2.806
2.944
3.028
3.083

AGMA 10
.104 FACE
1/8, 3/16 & 1/4 BORE
20 PRESSURE ANGLE
R
Inch
MATERIAL:
1
Precision
Component

2024 Aluminum

B Bore
Selection
Code
Size
3
4
6
.1248 (1/8)
.1873 (3/16)
.2498 (1/4)
H
Pin Type
Dia.
Code
2
4
6
C
Clamp Type
Dia.
Code
.312
.375
.437
.187
.250
.312
3
5
7

.325
.325
.104
.104
SUB
DRILL
+.0005
+.000
.1248 (1/8)
No. of
Teeth
Code
.1873 (3/16) 4
.2498 (1/4)

Pin Type
2, 4 or 6
303 Stainless Steel
2024 Aluminum
T4 or T351 Alloy,
Example:
S9703A-Z2F120AP is an Aluminum Pin Type
Clamp Type
No.
No. of
of
Teeth Code Teeth
100
105
108
110
115
120
125
130
140
144
150
160
170
180
190
200
210
216
220
100
105
108
110
115
120
125
130
140
144
150
160
170
180
190
200
210
216
220
6
7
FOR CLAMPS
SEE INDEX
Pin Type
P.D. O.D.
C -.003
SET SCREW
SUPPLIED
INCH COMPONENT
CATALOG NUMBER
S970 A-Z F
B -.0000
B Bore Code
P.D.
O.D.
1.3889
1.4583
1.5000
1.5278
1.5972
1.6667
1.7361
1.8056
1.9444
2.0000
2.0833
2.2222
2.3611
2.5000
2.6389
2.7778
2.9167
3.0000
3.0556
1.417
1.486
1.528
1.556
1.625
1.694
1.764
1.833
1.972
2.028
2.111
2.250
2.389
2.528
2.667
2.806
2.944
3.028
3.083
8
9
10
11
12
13
14
15
1-157
16
I
R
T
1

AGMA 10
.104 FACE
1/8, 3/16 & 1/4 BORE
20 PRESSURE ANGLE
Inch
MATERIAL:
1
Precision
Component
Gears - 303 Stainless Steel or 2024 Aluminum

2
3
4
Two style codes available per bore size.
B Bore
Selection
Code
Size
3
4
6
.1248 (1/8)
.1873 (3/16)
.2498 (1/4)
H
Pin Type
Code
P
P
P
C
Clamp Type
Dia.
Code
Dia.
.31
.37
.50
C
C
C
.188
.250
.312

.385
.385
.104
.104
SUB
DRILL
+.0005
B -.0000
SET SCREW
SUPPLIED
+.000
FOR CLAMPS
SEE INDEX
1/8
Pin Type
8
9
INCH COMPONENT
CATALOG NUMBER
S1A5 A- 072
B Bore Code
10
.1248 (1/8)
.1873 (3/16) 4
.2498 (1/4)
11
No. of
Teeth
Code

Pin Type
Clamp Type C
12

303 Stainless Steel
13
14
Example:
15
16
2024 Aluminum
T4 or T351 Alloy,
1-158
P.D. O.D.
C -.003
No.
No. of
of
Teeth Code Teeth
100
105
108
110
115
120
125
130
135
140
144
145
150
155
160
165
170
175
180
190
200
216
100
105
108
110
115
120
125
130
135
140
144
145
150
155
160
165
170
175
180
190
200
216
Clamp Type
P.D.
O.D.
1.3889
1.4583
1.5000
1.5278
1.5972
1.6667
1.7361
1.8056
1.8750
1.9444
2.0000
2.0139
2.0833
2.1528
2.2222
2.2917
2.3611
2.4306
2.5000
2.6389
2.7778
3.0000
1.417
1.486
1.528
1.556
1.625
1.694
1.764
1.833
1.903
1.972
2.028
2.042
2.111
2.181
2.250
2.319
2.389
2.458
2.528
2.667
2.806
3.028

AGMA 10
.104 FACE
20 PRESSURE ANGLE
R
Inch
MATERIAL:

2024 Aluminum
1
Precision
Component
T
1


shaft is .0001/.0008
3
4
.385
.104
.53
P.D. O.D.
B +.0005
-.0000

RADIUS .31 MAX.
INCH COMPONENT
CATALOG NUMBER
S1A5 A-F064
B Bore Code
.1248 (1/8)
No. of
Teeth
Code
.1873 (3/16) 4
.2498 (1/4)

303 Stainless Steel
2024 Aluminum
T4 or T351 Alloy,
Example:
5
6
7
8
No.
No. of
of
Teeth Code Teeth
085
090
095
096
100
105
110
115
120
125
128
130
140
150
160
170
180
190
192
85
90
95
96
100
105
110
115
120
125
128
130
140
150
160
170
180
190
192
P.D.
O.D.
1.3281
1.4063
1.4844
1.5000
1.5625
1.6406
1.7188
1.7969
1.8750
1.9531
2.0000
2.0313
2.1875
2.3438
2.5000
2.6563
2.8125
2.9688
3.0000
1.359
1.438
1.516
1.531
1.594
1.672
1.750
1.828
1.906
1.984
2.031
2.063
2.219
2.375
2.531
2.688
2.844
3.000
3.031
9
10
11
12
13
14
15
1-159
16
I
R
T
1
2
3
4
5

AGMA 10
.104 FACE
1/8, 3/16 & 1/4 BORE
20 PRESSURE ANGLE
Inch
MATERIAL:

2024 Aluminum

B Bore
Selection
Code
Size
3
4
6
.1248 (1/8)
.1873 (3/16)
.2498 (1/4)
H
Pin Type
Dia.
Code
2
4
6
C
Clamp Type
Dia.
Code
.312
.375
.437
.187
.250
.312
3
5
7

.325
.325
.104
.104
SUB
DRILL
+.0005
B -.0000
+.000
FOR CLAMPS
SEE INDEX
SET SCREW
SUPPLIED
INCH COMPONENT
CATALOG NUMBER
S970 A-Z E
B Bore Code
10
.1248 (1/8)
11
No. of
Teeth
Code
.1873 (3/16) 4
.2498 (1/4)

Pin Type
2, 4 or 6
12

303 Stainless Steel
13
14
Example:
S9703A-Z3E096AP is an Aluminum Clamp Type
15
16
2024 Aluminum
T4 or T351 Alloy,
1-160
P.D. O.D.
C -.003
Pin Type
1
Precision
Component
Clamp Type
No.
No. of
of
Teeth Code Teeth
085
090
095
096
100
105
110
115
120
125
128
130
140
150
160
170
180
190
192
85
90
95
96
100
105
110
115
120
125
128
130
140
150
160
170
180
190
192
P.D.
O.D.
1.3281
1.4063
1.4844
1.5000
1.5625
1.6406
1.7188
1.7969
1.8750
1.9531
2.0000
2.0313
2.1875
2.3438
2.5000
2.6563
2.8125
2.9688
3.0000
1.359
1.438
1.516
1.531
1.594
1.672
1.750
1.828
1.906
1.984
2.031
2.063
2.219
2.375
2.531
2.688
2.844
3.000
3.031

AGMA 10
.104 FACE
1/8, 3/16 & 1/4 BORE
20 PRESSURE ANGLE
R
Inch
MATERIAL:
1
Precision
Component

2024 Aluminum

B Bore
Selection
Code
Size
3
4
6
.1248 (1/8)
.1873 (3/16)
.2498 (1/4)
H
Pin Type
Dia.
Code
C
Clamp Type
Dia.
Code
.31
.37
.50
P
P
P
C
C
C
.188
.250
.312

.385
.385
.104
.104
SUB
DRILL
SET SCREW
SUPPLIED
+.000
.1248 (1/8)
No. of
Teeth
Code
.1873 (3/16) 4
.2498 (1/4)

Pin Type
Clamp Type C
303 Stainless Steel
2024 Aluminum
T4 or T351 Alloy,
Example:
S1A53A-C064S100 is a Stainless Steel Clamp Type
P.D. O.D.
C -.003
FOR CLAMPS
SEE INDEX
1/8
Pin Type
INCH COMPONENT
CATALOG NUMBER
S1A5 A- 064
+.0005
B -.0000
B Bore Code
6
7
Clamp Type
8
No.
No. of
of
Teeth Code Teeth
085
090
095
096
100
105
108
110
115
120
125
128
130
135
140
145
150
155
160
170
176
192
85
90
95
96
100
105
108
110
115
120
125
128
130
135
140
145
150
155
160
170
176
192
P.D.
O.D.
1.3281
1.4063
1.4844
1.5000
1.5625
1.6406
1.6875
1.7188
1.7969
1.8750
1.9531
2.0000
2.0313
2.1094
2.1875
2.2656
2.3438
2.4219
2.5000
2.6563
2.7500
3.0000
1.359
1.438
1.516
1.531
1.594
1.672
1.719
1.750
1.828
1.906
1.984
2.031
2.063
2.141
2.219
2.297
2.375
2.453
2.531
2.688
2.781
3.031
9
10
11
12
13
14
15
1-161
16
I
R
T
1

AGMA 10
.104 FACE
20 PRESSURE ANGLE
Inch
MATERIAL:

2024 Aluminum


shaft is .0001/.0008
4
.385
.104
5
6
.53
7
8
9
B Bore Code
10
.1248 (1/8)
3
6

303 Stainless Steel
12
13
14
2024 Aluminum
T4 or T351 Alloy,
Example:
S1A53A-F048S120 is a Stainless Steel AntiBacklash Gear with 120 Teeth and .1248 Bore
Fairloc Hub.
15
16
No. of
Teeth
Code
.1873 (3/16) 4
.2498 (1/4)
11
P.D. O.D.
B +.0005
-.0000

RADIUS .31 MAX.
INCH COMPONENT
CATALOG NUMBER
S1A5 A-F048
1-162
1
Precision
Component
No.
No. of
of
Teeth Code Teeth
065
070
072
075
080
084
085
090
095
096
100
105
110
115
120
125
130
140
144
65
70
72
75
80
84
85
90
95
96
100
105
110
115
120
125
130
140
144
P.D.
O.D.
1.3542
1.4583
1.5000
1.5625
1.6667
1.7500
1.7708
1.8750
1.9792
2.0000
2.0833
2.1875
2.2917
2.3958
2.5000
2.6042
2.7083
2.9167
3.0000
1.396
1.500
1.542
1.604
1.708
1.792
1.813
1.917
2.021
2.042
2.125
2.229
2.333
2.438
2.542
2.646
2.750
2.958
3.042

AGMA 10
.104 FACE
1/8, 3/16 & 1/4 BORE
20 PRESSURE ANGLE
R
Inch
MATERIAL:
1
Precision
Component

2024 Aluminum
T4 or T351 Alloy, anodized before cutting

B Bore
Selection
Code
Size
3
4
6
.1248 (1/8)
.1873 (3/16)
.2498 (1/4)
H
Pin Type
Dia.
Code
2
4
6
C
Clamp Type
Dia.
Code
3
5
7
.312
.375
.437
.187
.250
.312

.325
.325
.104
.104
SUB
DRILL
+.000
C -.003
Pin Type
.2498 (1/4)
No. of
Teeth
Code
.1873 (3/16) 4
6

Pin Type
2, 4 or 6
303 Stainless Steel
6
7
Clamp Type
INCH COMPONENT
CATALOG NUMBER
S970 A-Z D
3
P.D. O.D.
FOR CLAMPS
SEE INDEX
SET SCREW
SUPPLIED
.1248 (1/8)
+.0005
B -.0000
B Bore Code
2024 Aluminum
T4 or T351 Alloy,
Example:
S9703A-Z2D080-P is a Stainless Steel Pin Type
No.
No. of
of
Teeth Code Teeth
065
070
072
075
080
084
085
090
095
096
100
105
110
115
120
125
130
140
144
65
70
72
75
80
84
85
90
95
96
100
105
110
115
120
125
130
140
144
P.D.
O.D.
1.3542
1.4583
1.5000
1.5625
1.6667
1.7500
1.7708
1.8750
1.9792
2.0000
2.0833
2.1875
2.2917
2.3958
2.5000
2.6042
2.7083
2.9167
3.0000
1.396
1.500
1.542
1.604
1.708
1.792
1.813
1.917
2.021
2.042
2.125
2.229
2.333
2.438
2.542
2.646
2.750
2.958
3.042
9
10
11
12
13
14
15
1-163
16
I
R
T
1
2
3
4
5

AGMA 10
.104 FACE
1/8, 3/16 & 1/4 BORE
20 PRESSURE ANGLE
Inch
MATERIAL:

2024 Aluminum

B Bore
Selection
Code
Size
3
4
6
.1248 (1/8)
.1873 (3/16)
.2498 (1/4)
H
Pin Type
Dia.
Code
C
Clamp Type
Dia.
Code
.31
.37
.50
P
P
P
C
C
C
.188
.250
.312

.385
.385
.104
.104
SUB
DRILL
+.0005
B -.0000
SET SCREW
SUPPLIED
+.000
INCH COMPONENT
CATALOG NUMBER
S1A5 A- 048
B Bore Code
10
.1248 (1/8)
.1873 (3/16) 4
.2498 (1/4)
11
No. of
Teeth
Code

Pin Type
Clamp Type C
12

303 Stainless Steel
13
14
Example:
15
16
2024 Aluminum
T4 or T351 Alloy,
1-164
P.D. O.D.
C -.003
FOR CLAMPS
SEE INDEX
1/8
Pin Type
1
Precision
Component
No.
No. of
of
Teeth Code Teeth
065
066
068
070
072
074
075
080
084
085
090
095
096
100
105
110
115
120
125
130
132
144
65
66
68
70
72
74
75
80
84
85
90
95
96
100
105
110
115
120
125
130
132
144
Clamp Type
P.D.
O.D.
1.3281
1.4063
1.4844
1.5000
1.5625
1.6406
1.6875
1.7188
1.7969
1.8750
1.9531
2.0000
2.0313
2.1094
2.1875
2.2656
2.3438
2.4219
2.5000
2.6563
2.7500
3.0000
1.359
1.438
1.516
1.531
1.594
1.672
1.719
1.750
1.828
1.906
1.984
2.031
2.063
2.141
2.219
2.297
2.375
2.453
2.531
2.688
2.781
3.031

AGMA 10
3/16 FACE
1/4 BORE
20 PRESSURE ANGLE
R
Inch
MATERIAL:
1
Precision
Component

2024 Aluminum
T
1

2
3
4
.427
.427
3/16
SUB
DRILL
3/16
+.0005
.2498 -.0000
+.000
.50
.312 -.003
SET SCREW
SUPPLIED
FOR CLAMPS
SEE INDEX
1/8
Pin Type
INCH COMPONENT
CATALOG NUMBER
S1A86A- 032
No. of
Teeth
Code
Hub Style Code

Pin Type
Clamp Type

303 Stainless Steel
2024 Aluminum
T4 or T351 Alloy,
Example:
S1A86A-P032S048 is a Stainless Steel Pin
Type Anti-Backlash Gear with 48 Teeth
P.D. O.D.
5
6
7
Clamp type
8
No.
No. of
of
Teeth Code Teeth
040
042
044
045
046
048
050
052
054
055
056
058
060
062
064
065
070
072
075
080
085
096
40
42
44
45
46
48
50
52
54
55
56
58
60
62
64
65
70
72
75
80
85
96
P.D.
O.D.
1.2500
1.3125
1.3750
1.4063
1.4375
1.5000
1.5625
1.6250
1.6875
1.7188
1.7500
1.8125
1.8750
1.9375
2.0000
2.0313
2.1875
2.2500
2.3438
2.5000
2.6563
3.0000
1.313
1.375
1.438
1.469
1.500
1.563
1.625
1.688
1.750
1.781
1.813
1.875
1.938
2.000
2.063
2.094
2.250
2.313
2.406
2.563
2.719
3.063
9
10
11
12
13
14
15
1-165
16
I
R
T
1
2

AGMA 10
3/16 FACE
1/4 BORE
20 PRESSURE ANGLE
Inch
MATERIAL:

2024 Aluminum

.427
.427
3/16
SUB
DRILL
5
6
3/16
+.0005
.2498 -.0000
+.000
.50
.312 -.003
SET SCREW
SUPPLIED
FOR CLAMPS
SEE INDEX
1/8
Pin Type
Clamp type
7
8
9
10
INCH COMPONENT
CATALOG NUMBER
S1A86A- 024
No. of
Teeth
Code
Hub Style
Pin Type
Clamp Type
11
303 Stainless Steel
2024 Aluminum
T4 or T351 Alloy,
12
13
14
Example:
S1A86A-P024S035 is a Stainless Steel Pin
Type Anti-Backlash Gear with 35 Teeth
15
16
1
Precision
Component
1-166
No.
No. of
of
Teeth Code Teeth
030
032
035
036
038
040
042
044
045
046
048
050
052
054
055
056
058
060
062
065
066
072
30
32
35
36
38
40
42
44
45
46
48
50
52
54
55
56
58
60
62
65
66
72
P.D.
O.D.
1.2500
1.3333
1.4583
1.5000
1.5833
1.6667
1.7500
1.8333
1.8750
1.9167
2.0000
2.0833
2.1667
2.2500
2.2917
2.3333
2.4167
2.5000
2.5833
2.7083
2.7500
3.0000
1.333
1.417
1.542
1.583
1.667
1.750
1.833
1.917
1.958
2.000
2.083
2.167
2.250
2.333
2.375
2.417
2.500
2.583
2.667
2.792
2.833
3.083
P.D. O.D.
FAIRLOC HUB MINI-LASH GEARS 120 PITCH

AGMA 10
.104 FACE
20 PRESSURE ANGLE
R
Inch
MATERIAL:

2024 Aluminum
Springs - 302 Stainless Steel, Torsion Type,
Spring Temper
1
Precision
Component
T
1


shaft is .0001/.0008.
.385
.104
B +.0005
-.0000
.53
P.D. O.D.
FAIRLOC HUB
CLEARANCE
RADIUS .31 MAX.
6
7
INCH COMPONENT
CATALOG NUMBER
S1M5 A-F120
B Bore Code
.1248 (1/8)
No. of
Teeth
Code
.1873 (3/16) 4
.2498 (1/4)

303 Stainless Steel
2024 Aluminum
T4 or T351 Alloy,
Example:
S1M56A-F120A090 is an Aluminum MiniLash Gear with 90 Teeth and .2498 Bore
Fairloc Hub.
No.
No. of
of
Teeth Code Teeth
075
080
084
085
090
095
096
100
105
110
115
120
125
130
132
135
140
144
145
148
75
80
84
85
90
95
96
100
105
110
115
120
125
130
132
135
140
144
145
148
P.D.
O.D.
.6250
.6667
.7000
.7083
.7500
.7917
.8000
.8333
.8750
.9167
.9583
1.0000
1.0417
1.0833
1.1000
1.1250
1.1667
1.2000
1.2083
1.2333
.642
.683
.717
.725
.767
.808
.817
.850
.892
.933
.975
1.017
1.058
1.100
1.117
1.142
1.183
1.217
1.225
1.250
8
9
10
11
12
13
14
15
1-167
16
I
R
T
1
2
3
4
5
MINI-LASH GEARS 120 PITCH

AGMA 10
.104 FACE
1/8, 3/16 & 1/4 BORE
20 PRESSURE ANGLE
Inch
MATERIAL:

2024 Aluminum
Spring Temper

H
B Bore
Pin Type
Selection
Code
Size
Dia.
Code
3
4
6
.1248 (1/8)
.1873 (3/16)
.2498 (1/4)
2
4
6
C
Clamp Type
Dia.
Code
.312
.375
.437
.187
.250
.312
3
5
7
.325

.325
.104
.104
SUB
DRILL
+.0005
B -.0000
+.000
FOR CLAMPS
SEE INDEX
SET SCREW
SUPPLIED
INCH COMPONENT
CATALOG NUMBER
S971 A-Z J
B Bore Code
10
.1248 (1/8)
11
No. of
Teeth
Code
.1873 (3/16) 4
.2498 (1/4)

Pin Type
2, 4 or 6
12

303 Stainless Steel
13
14
Example:
S9713A-Z3J084-P is a Stainless Steel Clamp Type
Mini-Lash Gear with 84 Teeth and .1248 Bore.
15
16
2024 Aluminum
T4 or T351 Alloy,
1-168
P.D. O.D.
C -.003
Pin Type
1
Precision
Component
Clamp Type
No.
No. of
of
Teeth Code Teeth
060
065
070
072
075
080
084
085
090
095
096
100
105
110
115
120
125
130
132
135
140
144
145
148
60
65
70
72
75
80
84
85
90
95
96
100
105
110
115
120
125
130
132
135
140
144
145
148
P.D.
O.D.
.5000
.5417
.5833
.6000
.6250
.6667
.7000
.7083
.7500
.7917
.8000
.8333
.8750
.9167
.9583
1.0000
1.0417
1.0833
1.1000
1.1250
1.1667
1.2000
1.2083
1.2333
.517
.558
.600
.617
.642
.683
.717
.725
.767
.808
.817
.850
.892
.933
.975
1.017
1.058
1.100
1.117
1.142
1.183
1.217
1.225
1.250

AGMA 10
.104 FACE
20 PRESSURE ANGLE
R
Inch
MATERIAL:

2024 Aluminum
Spring Temper
1
Precision
Component
T
1


shaft is .0001/.0008.
3
4
.385
.104
B +.0005
-.0000
.53
P.D. O.D.
FAIRLOC HUB
CLEARANCE
RADIUS .31 MAX.
INCH COMPONENT
CATALOG NUMBER
S1M5 A-F096
B Bore Code
.1248 (1/8)
No. of
Teeth
Code
.1873 (3/16) 4
.2498 (1/4)

303 Stainless Steel
2024 Aluminum
T4 or T351 Alloy,
Example:
S1M53A-F096S074 is a Stainless Steel MiniLash Gear with 74 Teeth and .1248 Bore
Fairloc Hub.
8
No.
No. of
of
Teeth Code Teeth
060
062
064
066
068
070
072
074
080
084
090
096
100
102
108
110
114
118
60
62
64
66
68
70
72
74
80
84
90
96
100
102
108
110
114
118
P.D.
O.D.
.6250
.6458
.6667
.6875
.7083
.7292
.7500
.7708
.8333
.8750
.9375
1.0000
1.0417
1.0625
1.1250
1.1458
1.1875
1.2292
.646
.667
.688
.708
.729
.750
.771
.792
.854
.896
.958
1.021
1.063
1.083
1.146
1.167
1.208
1.250
9
10
11
12
13
14
15
1-169
16
I
R
T
1
2
3
4
5

AGMA 10
.104 FACE
1/8, 3/16 & 1/4 BORE
20 PRESSURE ANGLE
Inch
MATERIAL:

2024 Aluminum
Spring Temper

H
B Bore
Pin Type
Selection
Code
Size
Dia.
Code
3
4
6
.1248 (1/8)
.1873 (3/16)
.2498 (1/4)
2
4
6
C
Clamp Type
Dia.
Code
3
5
7
.312
.375
.437
.187
.250
.312
.325

.325
.104
.104
SUB
DRILL
+.0005
B -.0000
+.000
FOR CLAMPS
SEE INDEX
SET SCREW
SUPPLIED
INCH COMPONENT
CATALOG NUMBER
S971 A-Z H
B Bore Code
10
.1248 (1/8)
11
No. of
Teeth
Code
.1873 (3/16) 4
.2498 (1/4)

Pin Type
2, 4 or 6
12

303 Stainless Steel
13
14
Example:
S9713A-Z2H064-P is a Stainless Steel Pin Type
15
16
2024 Aluminum
T4 or T351 Alloy,
1-170
P.D. O.D.
C -.003
Pin Type
1
Precision
Component
Clamp Type
No.
No. of
of
Teeth Code Teeth
048
050
052
054
056
058
060
062
064
066
068
070
072
074
080
084
090
096
100
102
108
110
114
118
48
50
52
54
56
58
60
62
64
66
68
70
72
74
80
84
90
96
100
102
108
110
114
118
P.D.
O.D.
.5000
.5208
.5417
.5625
.5833
.6042
.6250
.6458
.6667
.6875
.7083
.7292
.7500
.7708
.8333
.8750
.9375
1.0000
1.0417
1.0625
1.1250
1.1458
1.1875
1.2292
.521
.542
.563
.583
.604
.625
.646
.667
.688
.708
.729
.750
.771
.792
.854
.896
.958
1.021
1.063
1.083
1.146
1.167
1.208
1.250

AGMA 10
.104 FACE
20 PRESSURE ANGLE
R
Inch
MATERIAL:

2024 Aluminum
Spring Temper
1
Precision
Component
T
1


shaft is .0001/.0008.
.385
.104
B +.0005
-.0000
.53
P.D. O.D.
FAIRLOC HUB
CLEARANCE
RADIUS .31 MAX.
4
5
6
7
INCH COMPONENT
CATALOG NUMBER
S1M5 A-F080
B Bore Code
.1248 (1/8)
No. of
Teeth
Code
.1873 (3/16) 4
.2498 (1/4)

303 Stainless Steel
2024 Aluminum
T4 or T351 Alloy,
Example:
Fairloc Hub.
8
No.
No. of
of
Teeth Code Teeth
050
052
054
055
056
058
060
062
064
065
066
070
075
080
085
090
095
098
50
52
54
55
56
58
60
62
64
65
66
70
75
80
85
90
95
98
P.D.
O.D.
.6250
.6500
.6750
.6875
.7000
.7250
.7500
.7750
.8000
.8125
.8250
.8750
.9375
1.0000
1.0625
1.1250
1.1875
1.2250
.650
.675
.700
.713
.725
.750
.775
.800
.825
.838
.850
.900
.963
1.025
1.088
1.150
1.213
1.250
9
10
11
12
13
14
15
1-171
16
I
R
T
1
2
3
4
5

AGMA 10
.104 FACE
1/8, 3/16 & 1/4 BORE
20 PRESSURE ANGLE
Inch
MATERIAL:

2024 Aluminum
Spring Temper

H
B Bore
Pin Type
Selection
Code
Size
Dia.
Code
3
4
6
.1248 (1/8)
.1873 (3/16)
.2498 (1/4)
2
4
6
C
Clamp Type
Dia.
Code
.312
.375
.437
.187
.250
.312
3
5
7
.325

.325
.104
.104
SUB
DRILL
+.0005
B -.0000
+.000
FOR CLAMPS
SEE INDEX
SET SCREW
SUPPLIED
INCH COMPONENT
CATALOG NUMBER
S971 A-Z G
B Bore Code
10
.1248 (1/8)
11
No. of
Teeth
Code
.1873 (3/16) 4
.2498 (1/4)

Pin Type
2, 4 or 6
12

303 Stainless Steel
13
14
Example:
S9713A-Z3G048-P is a Stainless Steel Clamp Type
15
16
2024 Aluminum
T4 or T351 Alloy,
1-172
P.D. O.D.
C -.003
Pin Type
1
Precision
Component
Clamp Type
No.
No. of
of
Teeth Code Teeth
040
042
044
045
046
048
050
052
054
055
056
058
060
062
064
065
066
070
075
080
085
090
095
098
40
42
44
45
46
48
50
52
54
55
56
58
60
62
64
65
66
70
75
80
85
90
95
98
P.D.
O.D.
.5000
.5250
.5500
.5625
.5750
.6000
.6250
.6500
.6750
.6875
.7000
.7250
.7500
.7750
.8000
.8125
.8250
.8750
.9375
1.0000
1.0625
1.1250
1.1875
1.2250
.525
.550
.575
.588
.600
.625
.650
.675
.700
.713
.725
.750
.775
.800
.825
.838
.850
.900
.963
1.025
1.088
1.150
1.213
1.250

AGMA 10
.104 FACE
20 PRESSURE ANGLE
R
Inch
MATERIAL:

2024 Aluminum
Spring Temper
1
Precision
Component
T
1


shaft is .0001/.0008.
3
4
.385
.104
B +.0005
-.0000
.53
P.D. O.D.
FAIRLOC HUB
CLEARANCE
RADIUS .31 MAX.
INCH COMPONENT
CATALOG NUMBER
S1M5 A-F072
B Bore Code
.1248 (1/8)
No. of
Teeth
Code
.1873 (3/16) 4
.2498 (1/4)

303 Stainless Steel
2024 Aluminum
T4 or T351 Alloy,
Example:
Fairloc Hub.
8
No.
No. of
of
Teeth Code Teeth
045
046
048
050
052
054
056
058
060
062
064
066
068
070
072
076
080
084
088
45
46
48
50
52
54
56
58
60
62
64
66
68
70
72
76
80
84
88
P.D.
O.D.
.6250
.6389
.6667
.6944
.7222
.7500
.7778
.8056
.8333
.8611
.8889
.9167
.9444
.9722
1.0000
1.0556
1.1111
1.1667
1.2222
.653
.667
.694
.722
.750
.778
.806
.833
.861
.889
.917
.944
.972
1.000
1.028
1.083
1.139
1.194
1.250
9
10
11
12
13
14
15
1-173
16
I
R
T
1
2
3
4
5

AGMA 10
.104 FACE
1/8, 3/16 & 1/4 BORE
20 PRESSURE ANGLE
Inch
MATERIAL:

2024 Aluminum
Spring Temper

H
B Bore
Pin Type
Selection
Code
Size
Dia.
Code
3
4
6
.1248 (1/8)
.1873 (3/16)
.2498 (1/4)
2
4
6
C
Clamp Type
Dia.
Code
.312
.375
.437
.187
.250
.312
3
5
7
.325

.325
.104
.104
SUB
DRILL
+.0005
B -.0000
+.000
FOR CLAMPS
SEE INDEX
SET SCREW
SUPPLIED
INCH COMPONENT
CATALOG NUMBER
S971 A-Z F
B Bore Code
10
.1248 (1/8)
11
No. of
Teeth
Code
.1873 (3/16) 4
.2498 (1/4)

Pin Type
2, 4 or 6
12

303 Stainless Steel
13
14
Example:
S9713A-Z2F054-P is a Stainless Steel Pin Type
15
16
2024 Aluminum
T4 or T351 Alloy,
1-174
P.D. O.D.
C -.003
Pin Type
1
Precision
Component
Clamp Type
No.
No. of
of
Teeth Code Teeth
036
038
040
042
044
045
046
048
050
052
054
056
058
060
062
064
066
068
070
072
076
080
084
088
36
38
40
42
44
45
46
48
50
52
54
56
58
60
62
64
66
68
70
72
76
80
84
88
P.D.
O.D.
.5000
.5278
.5555
.5833
.6111
.6250
.6389
.6667
.6944
.7222
.7500
.7778
.8055
.8333
.8611
.8889
.9167
.9444
.9722
1.0000
1.0555
1.1111
1.1667
1.2222
.528
.556
.583
.611
.639
.653
.667
.694
.722
.750
.778
.806
.833
.861
.889
.917
.944
.972
1.000
1.028
1.083
1.139
1.194
1.250

AGMA 10
.104 FACE
20 PRESSURE ANGLE
R
Inch
MATERIAL:

2024 Aluminum
Spring Temper
1
Precision
Component
T
1


shaft is .0001/.0008.
3
4
.385
.104
B +.0005
-.0000
.53
P.D. O.D.
FAIRLOC HUB
CLEARANCE
RADIUS .31 MAX.
INCH COMPONENT
CATALOG NUMBER
S1M5 A-F064
B Bore Code
.1248 (1/8)
No. of
Teeth
Code
.1873 (3/16) 4
.2498 (1/4)

303 Stainless Steel
2024 Aluminum
T4 or T351 Alloy,
Example:
S1M53A-F064S054 is a Stainless Steel MiniLash Gear with 54 Teeth and .1248 Bore
Fairloc Hub.
8
No.
No. of
of
Teeth Code Teeth
040
042
044
046
048
050
052
054
056
058
060
062
064
066
068
070
072
074
076
078
40
42
44
46
48
50
52
54
56
58
60
62
64
66
68
70
72
74
76
78
P.D.
O.D.
.6250
.6563
.6875
.7188
.7500
.7813
.8125
.8438
.8750
.9063
.9375
.9688
1.0000
1.0313
1.0625
1.0938
1.1250
1.1563
1.1875
1.2188
.656
.688
.719
.750
.781
.813
.844
.875
.906
.938
.969
1.000
1.031
1.063
1.094
1.125
1.156
1.188
1.219
1.250
9
10
11
12
13
14
15
1-175
16
I
R
T
1
2
3
4
5

AGMA 10
.104 FACE
1/8, 3/16 & 1/4 BORE
20 PRESSURE ANGLE
Inch
MATERIAL:

2024 Aluminum
Spring Temper

H
B Bore
Pin Type
Selection
Code
Size
Dia.
Code
3
4
6
.1248 (1/8)
.1873 (3/16)
.2498 (1/4)
2
4
6
C
Clamp Type
Dia.
Code
.312
.375
.437
.187
.250
.312
3
5
7
.325

.325
.104
.104
SUB
DRILL
+.0005
B -.0000
+.000
FOR CLAMPS
SEE INDEX
SET SCREW
SUPPLIED
INCH COMPONENT
CATALOG NUMBER
S971 A-Z E
B Bore Code
10
.1248 (1/8)
11
No. of
Teeth
Code
.1873 (3/16) 4
.2498 (1/4)

Pin Type
2, 4 or 6
12

303 Stainless Steel
13
14
Example:
S9713A-Z3E048-P is a Stainless Steel Clamp Type
15
16
2024 Aluminum
T4 or T351 Alloy,
1-176
P.D. O.D.
C -.003
Pin Type
1
Precision
Component
Clamp Type
No.
No. of
of
Teeth Code Teeth
032
034
036
038
040
042
044
046
048
050
052
054
056
058
060
062
064
066
068
070
072
074
076
078
32
34
36
38
40
42
44
46
48
50
52
54
56
58
60
62
64
66
68
70
72
74
76
78
P.D.
O.D.
.5000
.5312
.5625
.5937
.6250
.6562
.6875
.7187
.7500
.7812
.8125
.8437
.8750
.9062
.9375
.9687
1.0000
1.0312
1.0625
1.0937
1.1250
1.1562
1.1875
1.2187
.531
.563
.594
.625
.656
.688
.719
.750
.781
.813
.844
.875
.906
.938
.969
1.000
1.031
1.063
1.094
1.125
1.156
1.188
1.219
1.250
CLUSTER GEARS & HUBS 80 PITCH

AGMA 10
.1873 BORE
20 PRESSURE ANGLE
R
Inch
MATERIAL:
303 Stainless Steel
1
Precision
Component

Teeth not listed, different pitch,
bore size and passivation.
1
Style A
See S1268Z-series in the part number

index for hubless gears that can be mounted
on these cluster gears and hubs.
*.1873 +.0005
-.0000
1/8
1/2
.040
SUB
DRILL
Style B
*.3750 +.0003
-.0000
O.D. P.D. 3/8
5
#4-40
SET SCREW
1/32
5/32
Style A
Style C
.500
* CONCENTRIC
WITHIN .0003
1/8
1/8
.040
SUB
DRILL
5/32
.040
SUB
DRILL
.370
*.3750 +.0003
-.0000
3/8 P.D. O.D.
+.0005
*.1873 -.0000
#4-40
SET SCREW
#4-40
SET SCREW
7/32
*.3750 +.0003
-.0000
+.0005
*.1873 -.0000
10
11
Style B
Style C
.500
.500
12
INCH COMPONENT
Catalog Number
Style A
Style B
Style C
No.
of
Teeth
S1F74Z-A080S035
S1F74Z-A080S040
S1F74Z-A080S050
S1F74Z-A080S060
S1F94Z-B080S040
S1F94Z-B080S050
S1F74Z-C080S040
S1F74Z-C080S050
35
40
50
60
P.D.
O.D.
.4375
.5000
.6250
.7500
.4625
.5250
.6500
.7750
13
14
15
1-177
16
I
R
T

AGMA 10
.1873 BORE
20 PRESSURE ANGLE
Inch
MATERIAL:
303 Stainless Steel


*.1873 +.0005
-.0000
Style A
1/8
1/2
.040
SUB
DRILL
Style B
*.3750 +.0003
-.0000
O.D. P.D. 3/8
5
6
1
Precision
Component
#4-40
SET SCREW
1/32
5/32
Style A
Style C
.500
* CONCENTRIC
WITHIN .0003
1/8
1/8
.040
SUB
DRILL
5/32
.040
SUB
DRILL
.370
*.3750 +.0003
-.0000
*.3750 +.0003
-.0000
+.0005
3/8 P.D. O.D.
*.1873 -.0000
10
+.0005
*.1873 -.0000
11
Style B
16
Style C
.500
INCH COMPONENT
Catalog Number
Style A
Style B
Style C
No.
of
Teeth
S1F74Z-A072S030
S1F74Z-A072S033
S1F74Z-A072S035
S1F74Z-A072S038
S1F74Z-A072S040
S1F74Z-A072S050
S1F74Z-A072S060
S1F94Z-B072S030
S1F94Z-B072S033
S1F94Z-B072S035
S1F94Z-B072S038
S1F94Z-B072S040
S1F94Z-B072S050
S1F94Z-B072S060
S1F74Z-C072S030
S1F74Z-C072S033
S1F74Z-C072S035
S1F74Z-C072S038
S1F74Z-C072S040
S1F74Z-C072S050
S1F74Z-C072S060
30
33
35
38
40
50
60
13
15
7/32
.500
12
14
#4-40
SET SCREW
#4-40
SET SCREW
1-178
P.D.
O.D.
.4167
.4583
.4861
.5278
.5555
.6944
.8333
.444
.486
.514
.556
.583
.722
.861

AGMA 10
.1873 BORE
20 PRESSURE ANGLE
R
Inch
MATERIAL:
303 Stainless Steel
1
Precision
Component

1
Style A

*.1873 +.0005
-.0000
1/8
1/2
.040
SUB
DRILL
Style B
*.3750 +.0003
-.0000
O.D. P.D. 3/8
#4-40
SET SCREW
1/32
5/32
Style A
Style C
.500
* CONCENTRIC
WITHIN .0003
1/8
1/8
.040
SUB
DRILL
5/32
.040
SUB
DRILL
8
.370
*.3750 +.0003
-.0000
+.0005
*.1873 -.0000
*.3750 +.0003
-.0000
+.0005
3/8 P.D. O.D.
*.1873 -.0000
#4-40
SET SCREW
#4-40
SET SCREW
7/32
Style B
.500
12
INCH COMPONENT
Catalog Number
Style A
S1F74Z-A064S025
S1F74Z-A064S026
S1F74Z-A064S028
S1F74Z-A064S030
S1F74Z-A064S032
S1F74Z-A064S033
S1F74Z-A064S040
S1F74Z-A064S050
Style B
S1F94Z-B064S025
S1F94Z-B064S026
S1F94Z-B064S028
S1F94Z-B064S030
S1F94Z-B064S032
S1F94Z-B064S033
S1F94Z-B064S040
S1F94Z-B064S050
Hob cuts thru .3750 mounting diameter.
Style C
S1F74Z-C064S025
S1F74Z-C064S026
S1F74Z-C064S028
S1F74Z-C064S030
S1F74Z-C064S032
S1F74Z-C064S033
S1F74Z-C064S040
S1F74Z-C064S050
10
11
Style C
.500
No.
of
Teeth
P.D.
O.D.
25
26
28
30
32
33
40
50
.3906
.4063
.4375
.4688
.5000
.5156
.6250
.7812
.422
.438
.469
.500
.531
.547
.656
.813
1-179
13
14
15
16
I
R
T

AGMA 10
.2498 BORE
20 PRESSURE ANGLE
Inch
MATERIAL:
303 Stainless Steel
1
Precision
Component

teeth not listed, different pitch,

Style D
1/8
.070
SUB DRILL
5/32
*.3750 +.0003
-.0000
4
*.2498 +.0005
-.0000
Style E
1/2
5
#4-40
SET SCREW
Style D
.500
*CONCENTRIC
WITHIN .0003
1/8
.070
SUB DRILL
9
10
11
*.3750 +.0003
-.0000
1/2 P.D. O.D.
*.2498 +.0005
-.0000
7/32
#4-40
SET SCREW
Style E
.500
12
INCH COMPONENT
13
14
Catalog Number
Style D
Style E
No.
of
Teeth
S1F76Z-D064S030
S1F76Z-D064S040
S1F76Z-D064S050
S1F96Z-E064S030
S1F96Z-E064S040
S1F96Z-E064S050
30
40
50
15
16
1-180
P.D.
O.D.
.4688
.6250
.7813
.5000
.6563
.8125

AGMA 10
.1873 BORE
20 PRESSURE ANGLE
R
Inch
MATERIAL:
303 Stainless Steel
1
Precision
Component

1
Style A

*.1873 +.0005
-.0000
1/8
1/2
.040
SUB
DRILL
Style B
*.3750 +.0003
-.0000
O.D. P.D. 3/8
#4-40
SET SCREW
1/32
5/32
Style A
Style C
.500
* CONCENTRIC
WITHIN .0003
1/8
1/8
.040
SUB
DRILL
5/32
.040
SUB
DRILL
.370
*.3750 +.0003
-.0000
+.0005
*.1873 -.0000
#4-40
SET SCREW
#4-40
SET SCREW
7/32
*.3750 +.0003
-.0000
+.0005
*.1873 -.0000
3/8 P.D. O.D.
10
11
Style B
Style C
.500
.500
12
INCH COMPONENT
Catalog Number
Style A
S1F74Z-A048S020
S1F74Z-A048S022
S1F74Z-A048S023
S1F74Z-A048S024
S1F74Z-A048S030
S1F74Z-A048S040
Style B
S1F94Z-B048S020
S1F94Z-B048S022
S1F94Z-B048S023
S1F94Z-B048S024
S1F94Z-B048S030
S1F94Z-B048S040
Hob cuts thru .3750 mounting diameter.
Style C
S1F74Z-C048S020
S1F74Z-C048S022
S1F74Z-C048S023
S1F74Z-C048S024
S1F74Z-C048S030
S1F74Z-C048S040
No.
of
Teeth
P.D.
O.D.
20
22
23
24
30
40
.4167
.4583
.4792
.5000
.6250
.8333
.458
.500
.521
.542
.667
.875
1-181
13
14
15
16
I
R
T

AGMA 10
.2498 BORE
20 PRESSURE ANGLE
Inch
MATERIAL:
303 Stainless Steel
1
Precision
Component

teeth not listed, different pitch,

Style D
1/8
.070
SUB DRILL
5/32
*.3750 +.0003
-.0000
4
*.2498 +.0005
-.0000
Style E
1/2
5
#4-40
SET SCREW
Style D
.500
*CONCENTRIC
WITHIN .0003
1/8
.070
SUB DRILL
9
10
11
*.3750 +.0003
-.0000
1/2 P.D. O.D.
*.2498 +.0005
-.0000
7/32
12
#4-40
SET SCREW
Style E
.500
INCH COMPONENT
13
14
Catalog Number
Style D
Style E
No.
of
Teeth
S1F76Z-D048S025
S1F76Z-D048S030
S1F96Z-E048S025
S1F96Z-E048S030
25
30
15
16
1-182
P.D.
O.D.
.5208
.6250
.5625
.6667
PINION WIRE 64 PITCH

EXTRUDED
14-1/2 AND 20 PRESSURE ANGLE
MATERIAL:
Inch
Brass and Steel
SPECIFICATIONS:
Sold in 1, 3 and 5 foot lengths.

Notes: 1. The pinion wire shown on the right will have
unfinished ends.
2. The overall length tolerance on cut pinion
wire is .5 in.
Other lengths available on request call Engineering.
1
2
LENGTH CODE:
1 1 ft. Pinion Wire
3 3 ft. Pinion Wire
5 5 ft. Pinion Wire
3
4
INCH COMPONENT
Catalog Number
Brass
A
A
A
A
A
A
A
1B
1B
1B
1B
1B
1B
1B
A 1B
A 1B
A 1B
A 1B
A 1B
*A 1B
9-N64
9-N64
9-N64
9-N64
9-N64
9-N64
9-N64
9-N64
9-N64
9-N64
9-N64
9-N64
9-N64
20 Pressure Angle
Steel
*A 1C 9-N64 008
010
011
012
013
014
015
016
020
025
026
036
048
060
A 1C
A 1C
A 1C
A 1C
A 1C
*A 1C
9-N64
9-N64
9-N64
9-N64
9-N64
9-N64
010
011
014
016
018
020
Brass
A
A
A
A
A
A
A
A
A
A
A
A
A
A
1B
1B
1B
1B
1B
1B
1B
1B
1B
1B
1B
1B
1B
1B
A
A
A
A
A
1B
1B
1B
1B
1B
9-Y64
9-Y64
9-Y64
9-Y64
9-Y64
9-Y64
9-Y64
9-Y64
9-Y64
9-Y64
9-Y64
9-Y64
9-Y64
9-Y64
9-Y64
9-Y64
9-Y64
9-Y64
9-Y64
Steel
008
009
010
011
012
013
014
015
016
018
020
021
023
024
030
034
036
048
060
A
A
A
A
A
1C
1C
1C
1C
1C
A
A
A
A
A
1C
1C
1C
1C
1C
9-Y64
9-Y64
9-Y64
9-Y64
9-Y64
9-Y64
9-Y64
9-Y64
9-Y64
9-Y64
008
009
010
011
012
014
015
016
018
020
No.
of
P.D.
Teeth
O.D.
.125
.141
.156
.172
.188
.203
.219
.234
.250
.281
.313
.328
.359
.375
.391
.406
.469
.531
.563
.750
.938
.156
.172
.188
.203
.219
.234
.250
.266
.281
.313
.344
.359
.391
.406
.422
.438
.500
.563
.594
.781
.969
8
9
10
11
12
13
14
15
16
18
20
21
23
24
25
26
30
34
36
48
60
5
6
7
8
9
10
11
12
13
14
15
1-183
REV: 01.23.12 mh
16
PINION WIRE 48 & 44 PITCH

EXTRUDED
MATERIAL:
Inch
Brass and Steel
SPECIFICATIONS:

unfinished ends.
wire is .5 in.
1
2
LENGTH CODE:
1 1 ft. Pinion Wire
3 3 ft. Pinion Wire
5 5 ft. Pinion Wire
3
4
INCH COMPONENT
Catalog Number
Brass
48 Pitch
A 1B 9-N48
A 1B 9-N48
A 1B 9-N48
A 1B 9-N48
A 1B 9-N48
A 1B 9-N48
A 1B 9-N48
A 1B 9-N48
A 1B 9-N48
A 1B 9-N48
A 1B 9-N48
A 1B 9-N48
A 1B 9-N48
A 1B 9-N48
A 1B 9-N48
A 1B 9-N48
A 1B 9-N48
A 1B 9-N48
A 1B 9-N48
A 1B 9-N48
A 1B 9-N48
A 1B 9-N48
A 1B 9-N48
A 1B 9-N48
A 1B 9-N48
A 1B 9-N48
44 Pitch
028
030
032
034
036
045
048
A
A
A
A
A
1C
1C
1C
1C
1C
A 1C
A 1C
A 1C
A 1C
A
A
A
A
A
1C
1C
1C
1C
1C
A 1C
A 1C
A 1C
9-N48
9-N48
9-N48
9-N48
9-N48
9-N48
9-N48
9-N48
9-N48
9-N48
9-N48
9-N48
9-N48
9-N48
9-N48
9-N48
9-N48
No.
of
P.D.
Teeth
20 Pressure Angle
Steel
006
007
008
009
010
011
012
013
014
015
016
017
018
020
021
022
024
025
026
Brass
006
007
008
009
010
012
014
015
016
018
020
021
022
024
026
030
032
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
1B
1B
1B
1B
1B
1B
1B
1B
1B
1B
1B
1B
1B
1B
1B
1B
1B
1B
1B
1B
1B
1B
1B
1B
1B
1B
9-Y48
9-Y48
9-Y48
9-Y48
9-Y48
9-Y48
9-Y48
9-Y48
9-Y48
9-Y48
9-Y48
9-Y48
9-Y48
9-Y48
9-Y48
9-Y48
9-Y48
9-Y48
9-Y48
9-Y48
9-Y48
9-Y48
9-Y48
9-Y48
9-Y48
9-Y48
Steel
006
007
008
009
010
011
012
013
014
015
016
017
018
020
021
022
024
025
026
027
028
030
032
034
036
040
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
1C
1C
1C
1C
1C
1C
1C
1C
1C
1C
1C
1C
1C
1C
1C
1C
1C
1C
1C
9-Y48
9-Y48
9-Y48
9-Y48
9-Y48
9-Y48
9-Y48
9-Y48
9-Y48
9-Y48
9-Y48
9-Y48
9-Y48
9-Y48
9-Y48
9-Y48
9-Y48
9-Y48
9-Y48
A 1C 9-Y48
A 1C 9-Y48
006
007
008
009
010
011
012
013
014
015
016
017
018
020
021
022
024
025
026
030
032
*A 1C 9-Y44 010
O.D.
6
7
8
9
10
11
12
13
14
15
16
17
18
20
21
22
24
25
26
27
28
30
32
34
36
40
45
48
.125
.146
.167
.188
.208
.229
.250
.271
.292
.313
.333
.354
.375
.417
.438
.458
.500
.521
.542
.563
.583
.625
.667
.708
.750
.833
.938
1.000
.167
.188
.208
.229
.250
.271
.292
.313
.333
.354
.375
.396
.417
.458
.479
.500
.542
.563
.583
.604
.625
.667
.708
.750
.792
.875
.979
1.042
10
.227
.273
5
6
7
8
9
10
11
12
13
14
15
1-184
REV: 01.23.12 mh
16
PINION WIRE 32 & 24 PITCH

EXTRUDED
MATERIAL:
Inch
Brass and Steel
SPECIFICATIONS:

unfinished ends.
wire is .5 in.
1
2
LENGTH CODE:
1 1 ft. Pinion Wire
3 3 ft. Pinion Wire
5 5 ft. Pinion Wire
3
4
INCH COMPONENT
Catalog Number
Brass
32 Pitch
A 1B 9-N32
A 1B 9-N32
A 1B 9-N32
A 1B 9-N32
A 1B 9-N32
A 1B 9-N32
A 1B 9-N32
A 1B 9-N32
A 1B 9-N32
A 1B 9-N32
A 1B 9-N32
A 1B 9-N32
A 1B 9-N32
A 1B 9-N32
A 1B 9-N32
A 1B 9-N32
24 Pitch
A 1B 9-N24
A 1B 9-N24
A 1B 9-N24
A 1B 9-N24
A 1B 9-N24
A 1B 9-N24
A 1B 9-N24
A 1B 9-N24
A 1B 9-N24
A 1B 9-N24
A 1B 9-N24
A 1B 9-N24
A 1B 9-N24
Steel
006
008
009
010
011
012
013
014
015
016
018
020
022
024
028
032
A
A
A
A
A
A
A
A
1C
1C
1C
1C
1C
1C
1C
1C
A
A
A
A
A
1C
1C
1C
1C
1C
006
007
008
009
010
011
012
014
015
016
018
020
024
A
A
A
A
A
A
A
A
A
A
A
A
1C
1C
1C
1C
1C
1C
1C
1C
1C
1C
1C
1C
No.
of
P.D.
Teeth
20 Pressure Angle
Brass
9-N32
9-N32
9-N32
9-N32
9-N32
9-N32
9-N32
9-N32
9-N32
9-N32
9-N32
9-N32
9-N32
006
008
009
010
011
012
013
014
9-N24
9-N24
9-N24
9-N24
9-N24
9-N24
9-N24
9-N24
9-N24
9-N24
9-N24
9-N24
006
007
008
009
010
011
012
014
015
016
018
020
016
018
020
022
024
A
A
A
A
A
A
A
A
A
A
A
A
9-Y32
9-Y32
9-Y32
9-Y32
9-Y32
9-Y32
9-Y32
9-Y32
9-Y32
9-Y32
9-Y32
9-Y32
A 1B 9-Y32
A 1B 9-Y32
A
A
A
A
A
A
1B
1B
1B
1B
1B
1B
1B
1B
1B
1B
1B
1B
1B
1B
1B
1B
1B
1B
A 1B
A 1B
9-Y24
9-Y24
9-Y24
9-Y24
9-Y24
9-Y24
9-Y24
9-Y24
Steel
006
008
009
010
011
012
013
014
015
016
018
020
024
028
008
009
010
011
012
014
016
018
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
1C
1C
1C
1C
1C
1C
1C
1C
1C
1C
1C
1C
1C
1C
1C
1C
1C
1C
1C
1C
1C
1C
1C
9-Y32
9-Y32
9-Y32
9-Y32
9-Y32
9-Y32
9-Y32
9-Y32
9-Y32
9-Y32
9-Y32
9-Y32
9-Y32
9-Y32
9-Y24
9-Y24
9-Y24
9-Y24
9-Y24
9-Y24
9-Y24
9-Y24
9-Y24
006
008
009
010
011
012
013
014
015
016
018
020
022
024
008
009
010
011
012
014
015
016
018
O.D.
6
8
9
10
11
12
13
14
15
16
18
20
22
24
28
32
.188
.250
.281
.313
.344
.375
.406
.438
.469
.500
.563
.625
.688
.750
.875
1.000
.250
.313
.344
.375
.406
.438
.469
.500
.531
.563
.625
.688
.750
.813
.938
1.063
6
7
8
9
10
11
12
14
15
16
18
20
24
.250
.292
.333
.375
.417
.458
.500
.583
.625
.667
.750
.833
1.000
.333
.375
.417
.458
.500
.542
.583
.667
.708
.750
.833
.917
1.083
5
6
7
8
9
10
11
12
13
14
15
1-185
REV: 01.23.12 mh
16
SPUR GEAR STOCK 48 & 32 PITCH

MATERIAL:
Steel
Inch
T
1
3/4
5
6
7
8
9
10
11
12
13
14
INCH COMPONENT
Catalog Number
48 Pitch
A 1C29-N48014
A 1C29-N48016
A 1C29-N48020
A 1C29-N48022
A 1C29-N48026
A 1C29-N48030
A 1C29-N48032
A 1C29-N48040
A 1C29-N48044
A 1C29-N48048
A 1C29-N48052
A 1C29-N48056
A 1C29-N48060
A 1C29-N48064
A 1C29-N48072
A 1C29-N48080
A 1C29-N48096
A 1C29-N48100
A 1C29-N48108
A 1C29-N48120
32 Pitch
A 1C29-N32016
A 1C29-N32018
A 1C29-N32020
A 1C29-N32022
A 1C29-N32024
A 1C29-N32032
A 1C29-N32036
A 1C29-N32038
A 1C29-N32040
A 1C29-N32044
A 1C29-N32048
A 1C29-N32054
A 1C29-N32060
A 1C29-N32064
A 1C29-N32072
A 1C29-N32080
A 1C29-N32084
A 1C29-N32096
15
16
P.D.
C
3
4
O.D.
1-186
20 Pressure Angle
No.
of
Teeth
P.D.
O.D.
C
Shank
Dia.
L
Minimun
Usable Length
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
1C29-Y48014
1C29-Y48016
1C29-Y48020
1C29-Y48022
1C29-Y48026
1C29-Y48030
1C29-Y48032
1C29-Y48040
1C29-Y48044
1C29-Y48048
1C29-Y48052
1C29-Y48056
1C29-Y48060
1C29-Y48064
1C29-Y48072
1C29-Y48080
1C29-Y48096
1C29-Y48100
1C29-Y48108
1C29-Y48120
14
16
20
22
26
30
32
40
44
48
52
56
60
64
72
80
96
100
108
120
.292
.333
.417
.458
.542
.625
.667
.833
.917
1.000
1.083
1.167
1.250
1.333
1.500
1.667
2.000
2.083
2.250
2.500
.333
.375
.458
.500
.583
.667
.708
.875
.958
1.042
1.125
1.208
1.292
1.375
1.542
1.708
2.042
2.125
2.292
2.542
7/32
1/4
1/4
1/4
1/4
3/8
3/8
3/8
3/8
3/8
1/2
1/2
1/2
1/2
1/2
1/2
1/2
3/4
3/4
3/4
3
3
3
3
3
3
3
6
6
6
6
6
6
6
6
8
8
8
8
8
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
1C29-Y32016
1C29-Y32018
1C29-Y32020
1C29-Y32022
1C29-Y32024
1C29-Y32032
1C29-Y32036
1C29-Y32038
1C29-Y32040
1C29-Y32044
1C29-Y32048
1C29-Y32054
1C29-Y32060
1C29-Y32064
1C29-Y32072
1C29-Y32080
1C29-Y32084
1C29-Y32096
16
18
20
22
24
32
36
38
40
44
48
54
60
64
72
80
84
96
.500
.563
.625
.688
.750
1.000
1.125
1.188
1.250
1.375
1.500
1.688
1.875
2.000
2.250
2.500
2.625
3.000
.563
.625
.688
.750
.813
1.063
1.188
1.250
1.313
1.438
1.563
1.750
1.938
2.063
2.313
2.563
2.688
3.063
1/4
3/8
3/8
3/8
3/8
3/8
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
3/4
3/4
3/4
3/4
3
3
3
6
6
6
6
6
6
6
6
8
8
8
8
8
8
8
SPUR GEAR STOCK 24 & 20 PITCH

MATERIAL:
Steel
Inch
3/4
L
P.D.
O.D.
INCH COMPONENT
Catalog Number
24 Pitch
A 1C29-N24012
A 1C29-N24014
A 1C29-N24015
A 1C29-N24016
A 1C29-N24018
A 1C29-N24020
A 1C29-N24024
A 1C29-N24030
A 1C29-N24036
A 1C29-N24042
A 1C29-N24048
A 1C29-N24054
A 1C29-N24060
A 1C29-N24066
A 1C29-N24072
20 Pitch
A 1C29-N20012
A 1C29-N20014
A 1C29-N20015
A 1C29-N20016
A 1C29-N20018
A 1C29-N20020
A 1C29-N20024
A 1C29-N20030
A 1C29-N20035
A 1C29-N20040
A 1C29-N20045
A 1C29-N20050
A 1C29-N20060
20 Pressure Angle
No.
of
Teeth
P.D.
O.D.
C
Shank
Dia.
L
Minimun
Usable Length
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
1C29-Y24012
1C29-Y24014
1C29-Y24015
1C29-Y24016
1C29-Y24018
1C29-Y24020
1C29-Y24024
1C29-Y24030
1C29-Y24036
1C29-Y24042
1C29-Y24048
1C29-Y24054
1C29-Y24060
1C29-Y24066
1C29-Y24072
12
14
15
16
18
20
24
30
36
42
48
54
60
66
72
.500
.583
.625
.667
.750
.833
1.000
1.250
1.500
1.750
2.000
2.250
2.500
2.750
3.000
.583
.667
.708
.750
.833
.917
1.083
1.333
1.583
1.833
2.083
2.333
2.583
2.833
3.083
1/4
3/8
3/8
3/8
3/8
3/8
3/8
1/2
1/2
1/2
1/2
3/4
3/4
3/4
3/4
3
3
3
6
6
6
6
6
6
8
8
8
8
8
8
A
A
A
A
A
A
A
A
A
A
A
A
A
1C29-Y20012
1C29-Y20014
1C29-Y20015
1C29-Y20016
1C29-Y20018
1C29-Y20020
1C29-Y20024
1C29-Y20030
1C29-Y20035
1C29-Y20040
1C29-Y20045
1C29-Y20050
1C29-Y20060
12
14
15
16
18
20
24
30
35
40
45
50
60
.600
.700
.750
.800
.900
1.000
1.200
1.500
1.750
2.000
2.250
2.500
3.000
.700
.800
.850
.900
1.000
1.100
1.300
1.600
1.850
2.100
2.350
2.600
3.100
3/8
3/8
3/8
3/8
3/8
3/8
1/2
1/2
1/2
1/2
3/4
3/4
3/4
3
3
6
6
6
6
6
6
8
8
8
8
8
6
7
8
10
11
12
13
14
15
1-187
16
I
R
T
HELICAL GEARS 48 NORMAL PITCH

AGMA 10
3/16 FACE
1/4 BORE
RIGHT- AND LEFT-HAND
45 HELICAL ANGLE
20 PRESSURE ANGLE
Inch
1
Precision
Component
MATERIAL:
1
2
3
303 Stainless Steel

anodized before cutting.

Teeth not listed, different bore and/or
material, passivation for Stainless Steel.
.187
SUB DRILL
#6-32
SET SCREW
4
O.D.
.2498 +.0005
-.0000
P.D.
5
.500
1/8
6
.437
INCH COMPONENT
7
8
9
10
11
12
13
14
Catalog Number
Right-Hand
303 Stainless Steel
S1R86Z-P048S020
S1R86Z-P048S025
S1R86Z-P048S030
S1R86Z-P048S035
S1R86Z-P048S040
S1R86Z-P048S045
S1R86Z-P048S050
S1R86Z-P048S060
S1R86Z-P048S070
S1R86Z-P048S080
S1R86Z-P048S090
S1R86Z-P048S100
S1R86Z-P048A020
S1R86Z-P048A025
S1R86Z-P048A030
S1R86Z-P048A035
S1R86Z-P048A040
S1R86Z-P048A045
S1R86Z-P048A050
S1R86Z-P048A060
S1R86Z-P048A070
S1R86Z-P048A080
S1R86Z-P048A090
S1R86Z-P048A100
15
16
1-188
Left-Hand
No.
of
Teeth
P.D.
O.D.
S1L86Z-P048S020
S1L86Z-P048S025
S1L86Z-P048S030
S1L86Z-P048S035
S1L86Z-P048S040
S1L86Z-P048S045
S1L86Z-P048S050
S1L86Z-P048S060
S1L86Z-P048S070
S1L86Z-P048S080
S1L86Z-P048S090
S1L86Z-P048S100
20
25
30
35
40
45
50
60
70
80
90
100
.5892
.7365
.8838
1.0311
1.1784
1.3258
1.4730
1.7676
2.0622
2.3568
2.6516
2.9460
.631
.778
.925
1.072
1.220
1.367
1.514
1.809
2.104
2.398
2.693
2.987
S1L86Z-P048A020
S1L86Z-P048A025
S1L86Z-P048A030
S1L86Z-P048A035
S1L86Z-P048A040
S1L86Z-P048A045
S1L86Z-P048A050
S1L86Z-P048A060
S1L86Z-P048A070
S1L86Z-P048A080
S1L86Z-P048A090
S1L86Z-P048A100
20
25
30
35
40
45
50
60
70
80
90
100
.5892
.7365
.8838
1.0311
1.1784
1.3258
1.4730
1.7676
2.0622
2.3568
2.6516
2.9460
.631
.778
.925
1.072
1.220
1.367
1.514
1.809
2.104
2.398
2.693
2.987
HELICAL GEARS 20 PITCH

RIGHT- AND LEFT-HAND
45 HELIX
R
Inch
MATERIAL:
Steel (Hardened)
Gears other than standard stock

sizes are available on special order.
T
1
2
3
P.D. O.D.
4
Regular Key Slot
6
P.D. O.D.
7
8
*Face Key Slot
INCH COMPONENT
Catalog Number **
Right-hand
Left-hand
28.28 Normal Diametral Pitch
*A 1C 7-N20010L
A 1C 7-N20025R
No.
of
Teeth
P.D.
O.D.
10
25
.500
1.250
.571
1.321
B
Bore
+.0010
-.0000
.3125
.6250
F
Keyway
Face Width
x Depth
Width
9/16
3/8
3/32 x 3/32
1/8 x 1/16
For 25 teeth, only O.D. hardened.

* Face key slot cut on end of gear.
** To be discontinued when present stock is depleted.
10
11
12
13
14
15
1-189
REV: 07.11.12 mh
16
I
R
T
1
INTERNAL GEARS 96 & 72 PITCH

AGMA 10
1/8 FACE
20 PRESSURE ANGLE
Inch
MATERIAL:
303 Stainless Steel

2024-T4 Aluminum, Chromic anodized before cutting
1
Precision
Component

14-1/2 P.A., teeth not listed,
different material, passivation
2
3
O.D. +.0000
-.0005 P.D.
I.D. +.002
-.000
4
5
6
7
8
9
10
11
12
13
14
15
16
.125
INCH COMPONENT
Catalog Number
Stainless Steel
96 Pitch
S1E62Z-096S080
S1E62Z-096S100
S1E62Z-096S120
S1E62Z-096S140
S1E62Z-096S150
S1E63Z-096S150
S1E63Z-096S160
S1E63Z-096S180
S1E63Z-096S200
S1E63Z-096S240
S1E64Z-096S240
S1E64Z-096S250
S1E64Z-096S260
S1E64Z-096S280
S1E64Z-096S288
S1E64Z-096S300
72 Pitch
S1E62Z-072S060
S1E62Z-072S080
S1E62Z-072S100
S1E62Z-072S110
S1E63Z-072S110
S1E63Z-072S120
S1E63Z-072S140
S1E63Z-072S160
S1E63Z-072S180
S1E64Z-072S180
S1E64Z-072S190
S1E64Z-072S200
S1E64Z-072S216
S1E64Z-072S220
1-190
Aluminum
No.
of
Teeth
P.D.
I.D.
O.D.
S1E62Z-096A080
S1E62Z-096A100
S1E62Z-096A120
S1E62Z-096A140
S1E62Z-096A150
S1E63Z-096A150
S1E63Z-096A160
S1E63Z-096A180
S1E63Z-096A200
S1E63Z-096A240
S1E64Z-096A240
S1E64Z-096A250
S1E64Z-096A260
S1E64Z-096A280
S1E64Z-096A288
S1E64Z-096A300
80
100
120
140
150
150
160
180
200
240
240
250
260
280
288
300
.8333
1.0417
1.2500
1.4583
1.5625
1.5625
1.6667
1.8750
2.0833
2.5000
2.5000
2.6042
2.7083
2.9167
3.0000
3.1250
.813
1.021
1.229
1.438
1.542
1.542
1.646
1.854
2.063
2.479
2.479
2.583
2.688
2.896
2.979
3.104
1.998
1.998
1.998
1.998
1.998
2.998
2.998
2.998
2.998
2.998
3.998
3.998
3.998
3.998
3.998
3.998
S1E62Z-072A060
S1E62Z-072A080
S1E62Z-072A100
S1E62Z-072A110
S1E63Z-072A110
S1E63Z-072A120
S1E63Z-072A140
S1E63Z-072A160
S1E63Z-072A180
S1E64Z-072A180
S1E64Z-072A190
S1E64Z-072A200
S1E64Z-072A216
S1E64Z-072A220
60
80
100
110
110
120
140
160
180
180
190
200
216
220
.8333
1.1111
1.3889
1.5278
1.5278
1.6667
1.9444
2.2222
2.5000
2.5000
2.6389
2.7778
3.0000
3.0556
.805
1.083
1.361
1.500
1.500
1.639
1.916
2.194
2.472
2.472
2.611
2.750
2.972
3.027
1.998
1.998
1.998
1.998
2.998
2.998
2.998
2.998
2.998
3.998
3.998
3.998
3.998
3.998

AGMA 10
1/8 FACE
20 PRESSURE ANGLE
R
Inch
MATERIAL:
303 Stainless Steel

2024-T4 Aluminum, Chromic anodized before cutting
1
Precision
Component

T
1
2
3
O.D. +.0000
-.0005 P.D.
I.D. +.002
-.000
4
5
.125
INCH COMPONENT
Catalog Number
Stainless Steel
64 Pitch
S1E62Z-064S050
S1E62Z-064S060
S1E62Z-064S070
S1E62Z-064S080
S1E62Z-064S090
S1E63Z-064S090
S1E63Z-064S100
S1E63Z-064S120
S1E63Z-064S140
S1E63Z-064S160
S1E64Z-064S160
S1E64Z-064S170
S1E64Z-064S180
S1E64Z-064S192
S1E64Z-064S200
48 Pitch
S1E62Z-048S040
S1E62Z-048S050
S1E62Z-048S060
S1E62Z-048S070
S1E63Z-048S070
S1E63Z-048S080
S1E63Z-048S090
S1E63Z-048S100
S1E63Z-048S120
S1E64Z-048S120
S1E64Z-048S130
S1E64Z-048S140
S1E64Z-048S144
S1E64Z-048S156
Aluminum
No.
of
Teeth
P.D.
I.D.
O.D.
S1E62Z-064A050
S1E62Z-064A060
S1E62Z-064A070
S1E62Z-064A080
S1E62Z-064A090
S1E63Z-064A090
S1E63Z-064A100
S1E63Z-064A120
S1E63Z-064A140
S1E63Z-064A160
S1E64Z-064A160
S1E64Z-064A170
S1E64Z-064A180
S1E64Z-064A192
S1E64Z-064A200
50
60
70
80
90
90
100
120
140
160
160
170
180
192
200
.7813
.9375
1.0938
1.2500
1.4063
1.4063
1.5625
1.8750
2.1875
2.5000
2.5000
2.6563
2.8125
3.0000
3.1250
.750
.906
1.062
1.219
1.375
1.375
1.531
1.843
2.156
2.468
2.468
2.625
2.781
2.968
3.093
S1E62Z-048A040
S1E62Z-048A050
S1E62Z-048A060
S1E62Z-048A070
S1E63Z-048A070
S1E63Z-048A080
S1E63Z-048A090
S1E63Z-048A100
S1E63Z-048A120
S1E64Z-048A120
S1E64Z-048A130
S1E64Z-048A140
S1E64Z-048A144
S1E64Z-048A156
40
50
60
70
70
80
90
100
120
120
130
140
144
156
.8333
1.0417
1.2500
1.4583
1.4583
1.6667
1.8750
2.0833
2.5000
2.5000
2.7083
2.9167
3.0000
3.2500
.791
1.000
1.208
1.416
1.416
1.625
1.833
2.041
2.458
2.458
2.666
2.875
2.958
3.208
1.998
1.998
1.998
1.998
1.998
2.998
2.998
2.998
2.998
2.998
3.998
3.998
3.998
3.998
3.998
3.998
1.998
1.998
1.998
1.998
2.998
2.998
2.998
2.998
2.998
3.998
3.998
3.998
3.998
3.998
6
7
8
9
10
11
12
13
14
15
1-191
16
I
R
T
1

AGMA 10
1/8 FACE
20 PRESSURE ANGLE
Inch
MATERIAL:
303 Stainless Steel

2024-T4 Aluminum, Chromic Anodized Before Cutting
1
Precision
Component

2
3
O.D. +.0000
-.0005 P.D.
I.D. +.002
-.000
4
5
.125
INCH COMPONENT
6
7
8
9
10
11
12
13
14
15
16
Catalog Number
Stainless Steel
32 Pitch
S1E62Z-032S025
S1E62Z-032S030
S1E62Z-032S035
S1E62Z-032S040
S1E62Z-032S045
S1E63Z-032S045
S1E63Z-032S050
S1E63Z-032S060
S1E63Z-032S070
S1E63Z-032S080
S1E64Z-032S080
S1E64Z-032S085
S1E64Z-032S090
S1E64Z-032S096
S1E64Z-032S100
24 Pitch
S1E62Z-024S020
S1E62Z-024S025
S1E62Z-024S030
S1E62Z-024S035
S1E63Z-024S035
S1E63Z-024S040
S1E63Z-024S045
S1E63Z-024S050
S1E63Z-024S060
S1E64Z-024S060
S1E64Z-024S065
S1E64Z-024S070
S1E64Z-024S072
S1E64Z-024S078
1-192
Aluminum
No.
of
Teeth
P.D.
I.D.
O.D.
S1E62Z-032A025
S1E62Z-032A030
S1E62Z-032A035
S1E62Z-032A040
S1E62Z-032A045
S1E63Z-032A045
S1E63Z-032A050
S1E63Z-032A060
S1E63Z-032A070
S1E63Z-032A080
S1E64Z-032A080
S1E64Z-032A085
S1E64Z-032A090
S1E64Z-032A096
S1E64Z-032A100
25
30
35
40
45
45
50
60
70
80
80
85
90
96
100
.7813
.9375
1.0938
1.2500
1.4063
1.4063
1.5625
1.8750
2.1875
2.5000
2.5000
2.6563
2.8125
3.0000
3.1250
.718
.875
1.031
1.187
1.343
1.343
1.500
1.812
2.125
2.437
2.437
2.593
2.750
2.937
3.062
S1E62Z-024A020
S1E62Z-024A025
S1E62Z-024A030
S1E62Z-024A035
S1E63Z-024A035
S1E63Z-024A040
S1E63Z-024A045
S1E63Z-024A050
S1E63Z-024A060
S1E64Z-024A060
S1E64Z-024A065
S1E64Z-024A070
S1E64Z-024A072
S1E64Z-024A078
20
25
30
35
35
40
45
50
60
60
65
70
72
78
.8333
1.0417
1.2500
1.4583
1.4583
1.6667
1.8750
2.0833
2.5000
2.5000
2.7083
2.9167
3.0000
3.2500
.750
.958
1.166
1.375
1.375
1.583
1.791
2.000
2.416
2.416
2.625
2.834
2.916
3.166
1.998
1.998
1.998
1.998
1.998
2.998
2.998
2.998
2.998
2.998
3.998
3.998
3.998
3.998
3.998
3.998
1.998
1.998
1.998
1.998
2.998
2.998
2.998
2.998
2.998
3.998
3.998
3.998
3.998
3.998
INTERNAL GEARS 48, 32 & 24 PITCH

MATERIAL:
Inch
Brass
T
1
2
3
O.D. P.D.
4
5
INCH COMPONENT
48 Pitch
A
A
A
A
A
32 Pitch
A
A
A
24 Pitch
A
A
A
A
No.
of
Teeth
P.D.
O.D.
F
Face
Width
1B10-N48048
1B10-N48072
1B10-N48084
1B10-N48096
1B10-N48120
48
72
84
96
120
1.000
1.500
1.750
2.000
2.500
1-1/2
2
2-1/2
2-3/4
3-1/4
1/8
1/8
1/8
1/8
1/8
1B10-N32032
1B10-N32064
1B10-N32080
32
64
80
1.000
2.000
2.500
1-1/2
2-3/4
3-1/4
3/16
3/16
3/16
1B10-N24048
1B10-N24060
1B10-N24072
1B10-N24144
48
60
72
144
2.000
2.500
3.000
6.000
2-3/4
3-1/4
3-3/4
6-3/4
1/4
1/4
1/4
1/4
10
Catalog Number
7
8
11
12
13
14
15
1-193
16
PRECISION RACKS FINE PITCH

20 PRESSURE ANGLE
MATERIAL:
Inch
416 Stainless Steel
T
1
2

Rack Tolerances
Tooth to tooth spacing error
Total accumulated spacing error
Parallelism of pitch line to base
.0005
.002
.001
P.D. +.000
-.001
A 1/32
3
4
1
Precision
Component
C .005
E +.000
-.002
Fig. 1
C (REF.)
P.D. +.000
-.001
6
7
8
A 1/32
D +.0000
-.0002
E +.000
-.002
Fig. 2
INCH COMPONENT
9
10
11
12
13
14
Catalog Number
Fig. 1 Rectangular Rack
S1811Y-RB-1P
S1811Y-RB-2P
S1811Y-RB-3P
S1811Y-RB-4P
S1810Y-RB-5P
S1810Y-RB-6P
S1810Y-RB-7P
Fig. 2 Round Rack
S1809Y-RA-1P
S1808Y-RA-2P
S1807Y-RA-3P
S1807Y-RA-4P
S1805Y-RA-5P
S1805Y-RA-6P
S1804Y-RA-7P
15
16
1-194
Pitch
P.D.
D
Dia.
24
32
48
64
72
96
120
18
18
18
11
11
11
11
.4383
.4487
.4592
.4644
.3411
.3446
.3467
.230
.230
.230
.230
.167
.167
.167
.480
.480
.480
.480
.355
.355
.355
24
32
48
64
72
96
120
18
18
18
11
11
11
11
.4383
.3087
.1992
.2044
.1421
.1456
.1067
.194
.217
.162
.162
.140
.140
.067
.4997
.3747
.2497
.2497
.1872
.1872
.1247
.480
.340
.220
.220
.156
.156
.115
PRECISION RACKS FINE PITCH

20 PRESSURE ANGLE
MATERIAL:
Inch
416 Stainless Steel

2024-T4 Aluminum, Chromic Acid Anodized
1
Precision
Component

14-1/2 pressure angle, other material, hole
layouts and passivation for Stainless Steel.
Rack Tolerances
T
1
.0005
.002
.001
2
3
4
5
P.D. +.000
-.001
FACE
7
C.D.
C.D.
WIDTH
.218 FOR 24, 32, 48 & 64 PITCH
.156 FOR 72, 80, 96 & 120 PITCH
C.D.
.187
(4) .147 FOR 24, 32, 48 & 64 PITCH

(4) .120 FOR 72, 80, 96 & 120 PITCH
INCH COMPONENT
Catalog Number
Material
Pitch
P.D.
C.D.
S1811Y-RC-1
S1811Y-RC-1A
S1811Y-RC-2
S1811Y-RC-2A
S1811Y-RC-3
S1811Y-RC-3A
S1811Y-RC-4
S1811Y-RC-4A
S1810Y-RC-5
S1810Y-RC-5A
S1810Y-RC-6
S1810Y-RC-6A
S1810Y-RC-7
S1810Y-RC-7A
S1810Y-RC-8
S1810Y-RC-8A
Stainless Steel
Aluminum
Stainless Steel
Aluminum
Stainless Steel
Aluminum
Stainless Steel
Aluminum
Stainless Steel
Aluminum
Stainless Steel
Aluminum
Stainless Steel
Aluminum
Stainless Steel
Aluminum
24
24
32
32
48
48
64
64
72
72
80
80
96
96
120
120
.4383
.4383
.4487
.4487
.4592
.4592
.4644
.4644
.3411
.3411
.3425
.3425
.3446
.3446
.3467
.3467
3.208
3.208
3.208
3.208
2.875
2.875
2.208
2.208
1.541
1.541
1.541
1.541
.875
.875
.875
.875
Width
.002
.01
+.000
-.002
.230
.230
.230
.230
.230
.230
.230
.230
.167
.167
.167
.167
.167
.167
.167
.167
10
10
10
10
9
9
7
7
5
5
5
5
3
3
3
3
.480
.480
.480
.480
.480
.480
.480
.480
.355
.355
.355
.355
.355
.355
.355
.355
Face
9
10
11
12
13
14
15
1-195
16
PRECISION RACKS
20 PRESSURE ANGLE
MATERIAL:
Inch
416 Stainless Steel

14-1/2 P.A., other materials, hole
layouts and passivation.
Rack Tolerances
.0005
.002
.001
3
1/2 LINEAR PITCH,
BOTH ENDS
4
5
BOTH
ENDS
EQ. SP.
3.000 (TYP)
DRILL
2.000
3.000
3.000
TAP
FACE
E
B
X
1
Precision
Component
P.D. +.000
-.001
F/2
2.000
6
INCH COMPONENT
7
8
9
10
11
12
13
14
Face
+.000
-.005
+.000
-.005
.005
.002
16
20
24
1/10
32
48
1/20
64
72
80
96
11.185
11.147
11.120
10.994
11.087
11.055
10.994
11.038
11.033
11.028
11.022
.725
.725
.480
.480
.480
.480
.480
.480
.355
.355
.355
.591
.572
.558
.495
.542
.526
.495
.518
.515
.513
.510
.365 .010
.365 .010
.230
.230
.230
.230
.230
.230
.167
.167
.167
Catalog Number
(Ref. Only)
P.D.
Linear
Pitch
Drill
Tap
S1819Y-RD-01P
S1819Y-RD-02P
S1819Y-RD-03P
S1819Y-RD-04P
S1819Y-RD-05P
S1819Y-RD-06P
S1819Y-RD-07P
S1819Y-RD-08P
S1819Y-RD-09P
S1819Y-RD-10P
S1819Y-RD-11P
.312
.312
.218
.218
.218
.218
.218
.218
.156
.156
.156
.6625
.6750
.4383
.4482
.4487
.4592
.4591
.4644
.3411
.3425
.3446
.1963
.1570
.1309
.1000
.0982
.0654
.0500
.0491
.0436
.0393
.0327
.266
.266
.147
.147
.147
.147
.147
.147
.120
.120
.120
#10-32 x 3/8
#10-32 x 3/8
#6/32 x 1/4
#6/32 x 1/4
#6/32 x 1/4
#6/32 x 1/4
#6/32 x 1/4
#6/32 x 1/4
#4-40 x 3/16
#4-40 x 3/16
#4-40 x 3/16
S1819Y-RD-01P
S1819Y-RD-02P
S1819Y-RD-03P
S1819Y-RD-04P
S1819Y-RD-05P
S1819Y-RD-06P
S1819Y-RD-07P
S1819Y-RD-08P
S1819Y-RD-09P
S1819Y-RD-10P
S1819Y-RD-11P
15
16
Pitch
Catalog Number
1-196
RACKS 48, 32, 24 & 16 PITCH

MATERIAL:
Steel and Brass
Inch
PRESSURE ANGLE CODE:
Steel and Brass

N 14-1/2 P.A.
Y 20 P.A.
T
1
2
B
LENGTH
INCH COMPONENT
Catalog Number
Steel
A
A
A
A
A
A
A
A
1C121C121C121C121C121C121C121C12-
Brass
481
482
322
324
326
242
244
246
A
A
A
A
1B121B121B121B12
A 1B12A 1B12
481
482
322
324
242
244
Pitch
F
Face
Width
T
Thickness
B
Dim.
Stock
Length
(Feet)
48
48
32
32
32
24
24
24
1/8
1/8
3/16
3/16
3/16
1/4
1/4
1/4
1/8
1/8
3/16
3/16
3/16
1/4
1/4
1/4
.104
.104
.156
.156
.156
.208
.208
.208
1
2
2
4
6
2
4
6
4
5
6
7
8
MOLDED RACKS
MATERIAL:
Nylon 101, Natural Color: 14-1/2 P.A.

Acetal, Gray: 20 P.A.
10
T
B
LENGTH
INCH COMPONENT
Catalog Number
14-1/2 P.A.
Nylon
A
A
A
A
*A
*A
1N12-N48
1N12-N32
1N12-N24
1N12-N24A
1N12-N16
1N12-N16A
20 P.A.
Acetal
A
A
A
A
1M12-Y48
1M12-Y32
1M12-Y24
1M12-Y24A
* A 1M12-Y16
Pitch
F
Face
Width
T
Thickness
B
Dim.
48
32
24
24
16
16
16
1/8
3/16
1/4
1/4
5/16
5/16
5/16
1/8
3/16
1/4
1/4
5/16
5/16
11/32
7/64
5/32
13/64
13/64
1/4
1/4
9/32
Stock
Length
(Inch)
12
12
12
4-7/16
12
6
12
One End Not Finished.

* 16 pitch racks are recessed 3/32 deep on both sides, allowing a 1/8 wide rib down the center of rack.
Cross ribs at 2 in. intervals will permit easy drilling and fastening.
12
13
14
15
1-197
REV: 05.14.12 mh
11
16
I
R
T
1
2
MITER & BEVEL GEARS 72 PITCH

AGMA 10
1/8 BORE
PRECISION MATCHED SETS
20 PRESSURE ANGLE
Inch
MATERIAL:
1
Precision
Component
303 Stainless Steel

2024-T4 or T351 Aluminum Alloy,
Different bore size and/or material,
passivation for Stainless Steel.
.12
Sold as Set
#2-56 SET SCREW
SUB DRILL
4
5
6
7
8
9
10
11
12
13
14
15
16
.18
+.0005
.1248 -.0000 (TYP)

.312
3/32
INCH COMPONENT
Catalog Number
Ratio
S1343Z-72S24A024
1:1
S1343Z-72S24S024
1:1
S1343Z-72A24A024
1:1
S1343Z-72S36A036
1:1
S1343Z-72S36S036
1:1
S1343Z-72A36A036
1:1
S1343Z-72S36A054
1:1-1/2
S1343Z-72S36S054
1:1-1/2
S1343Z-72A36A054
1:1-1/2
S1343Z-72S36A072
1:2
S1343Z-72S36S072
1:2
S1343Z-72A36A072
1:2
S1343Z-72S36A108
1:3
S1343Z-72S36S108
1:3
S1343Z-72A36A108
1:3
S1343Z-72S36A144
1:4
S1343Z-72S36S144
1:4
S1343Z-72A36A144
1:4
1-198
No.
of
Teeth
24
24
24
24
24
24
36
36
36
36
36
36
36
54
36
54
36
54
36
72
36
72
36
72
36
108
36
108
36
108
36
144
36
144
36
144
P.D.
.333
.437
.437
.333
.437
.437
.333
.437
.437
.500
.531
.531
.500
.531
.531
.500
.531
.531
.640
.531
.640
.531
.640
.531
.750
.531
.750
.531
.750
.531
1.000
.531
1.000
.531
1.000
.531
1.250
.531
1.250
.531
1.250
.531
.500
.750
.500
.750
.500
.750
.500
1.000
.500
1.000
.500
1.000
.500
1.000
.500
1.000
.500
1.000
.500
2.000
.500
2.000
.500
2.000
Material
Stainless Steel
Aluminum
Stainless Steel
Stainless Steel
Aluminum
Aluminum
Stainless Steel
Aluminum
Stainless Steel
Stainless Steel
Aluminum
Aluminum
Stainless Steel
Aluminum
Stainless Steel
Stainless Steel
Aluminum
Aluminum
Stainless Steel
Aluminum
Stainless Steel
Stainless Steel
Aluminum
Aluminum
Stainless Steel
Aluminum
Stainless Steel
Stainless Steel
Aluminum
Aluminum
Stainless Steel
Aluminum
Stainless Steel
Stainless Steel
Aluminum
Aluminum
CLAMP TYPE MITER & BEVEL GEARS 72 PITCH

AGMA 10
1/8 BORE
20 PRESSURE ANGLE
R
Inch
MATERIAL:
1
Precision
Component
303 Stainless Steel

T
1

.12
Sold as Set
FOR CLAMPS
SEE INDEX
3
B
.250 +.000
-.003
1/32 SAW SLOT
+.0005
.1248 -.0000 (TYP)
+.000
.188 -.003
INCH COMPONENT
Catalog Number
Ratio
S1353Z-72S24A024
1:1
S1353Z-72S24S024
1:1
S1353Z-72A24A024
1:1
S1353Z-72S36A036
1:1
S1353Z-72S36S036
1:1
S1353Z-72A36A036
1:1
S1353Z-72S36A054
1:1-1/2
S1353Z-72S36S054
1:1-1/2
S1353Z-72A36A054
1:1-1/2
S1353Z-72S36A072
1:2
S1353Z-72S36S072
1:2
S1353Z-72A36A072
1:2
S1353Z-72S36A108
1:3
S1353Z-72S36S108
1:3
S1353Z-72A36A108
1:3
S1353Z-72S36A144
1:4
S1353Z-72S36S144
1:4
S1353Z-72A36A144
1:4
No.
of
Teeth
24
24
24
24
24
24
36
36
36
36
36
36
36
54
36
54
36
54
36
72
36
72
36
72
36
108
36
108
36
108
36
144
36
144
36
144
P.D.
.333
.499
.499
.333
.499
.499
.333
.499
.499
.500
.593
.593
.500
.593
.593
.500
.593
.593
.702
.593
.702
.593
.702
.593
.812
.593
.812
.593
.812
.593
1.062
.593
1.062
.593
1.062
.593
1.312
.593
1.312
.593
1.312
.593
.500
.750
.500
.750
.500
.750
.500
1.000
.500
1.000
.500
1.000
.500
1.000
.500
1.000
.500
1.000
.500
2.000
.500
2.000
.500
2.000
Material
Stainless Steel
Aluminum
Stainless Steel
Stainless Steel
Aluminum
Aluminum
Stainless Steel
Aluminum
Stainless Steel
Stainless Steel
Aluminum
Aluminum
Stainless Steel
Aluminum
Stainless Steel
Stainless Steel
Aluminum
Aluminum
Stainless Steel
Aluminum
Stainless Steel
Stainless Steel
Aluminum
Aluminum
Stainless Steel
Aluminum
Stainless Steel
Stainless Steel
Aluminum
Aluminum
Stainless Steel
Aluminum
Stainless Steel
Stainless Steel
Aluminum
Aluminum
1-199
6
7
8
9
10
11
12
13
14
15
16
I
R
T
1
2

AGMA 10
3/16 BORE
20 PRESSURE ANGLE
Inch
MATERIAL:
1
Precision
Component
303 Stainless Steel

Sold as Set
.16
A
#4-40 SET SCREW
SUB DRILL
.562
5
6
7
8
9
10
11
12
13
14
15
16
.22
+.0005
.1873 -.0000 (TYP)
7/64
.375
INCH COMPONENT
Catalog Number
Ratio
S1344Z-64S32A032
1:1
S1344Z-64S32S032
1:1
S1344Z-64A32A032
1:1
S1344Z-64S32A048
1:1-1/2
S1344Z-64S32S048
1:1-1/2
S1344Z-64A32A048
1:1-1/2
S1344Z-64S32A064
1:2
S1344Z-64S32S064
1:2
S1344Z-64A32A064
1:2
S1344Z-64S32A096
1:3
S1344Z-64S32S096
1:3
S1344Z-64A32A096
1:3
S1344Z-64S32A128
1:4
S1344Z-64S32S128
1:4
S1344Z-64A32A128
1:4
1-200
No.
of
Teeth
32
32
32
32
32
32
32
48
32
48
32
48
32
64
32
64
32
64
32
96
32
96
32
96
32
128
32
128
32
128
P.D.
.500
.562
.500
.562
.500
.562
.500
.750
.500
.750
.500
.750
.500
1.000
.500
1.000
.500
1.000
.500
1.000
.500
1.000
.500
1.000
.500
2.000
.500
2.000
.500
2.000
.656
.656
.656
.750
.750
.750
1.000
1.000
1.000
1.250
1.250
1.250
Material
Stainless Steel
Aluminum
Stainless Steel
Stainless Steel
Aluminum
Aluminum
Stainless Steel
Aluminum
Stainless Steel
Stainless Steel
Aluminum
Aluminum
Stainless Steel
Aluminum
Stainless Steel
Stainless Steel
Aluminum
Aluminum
Stainless Steel
Aluminum
Stainless Steel
Stainless Steel
Aluminum
Aluminum
Stainless Steel
Aluminum
Stainless Steel
Stainless Steel
Aluminum
Aluminum

AGMA 10
3/16 BORE
20 PRESSURE ANGLE
R
Inch
MATERIAL:
1
Precision
Component
303 Stainless Steel

T
1

Sold as Set
.16
FOR CLAMPS
SEE INDEX
4
.593
1/32 SAW SLOT
.250 +.000
-.003
+.0005
.1873 -.0000 (TYP)
+.000
.250 -.003
INCH COMPONENT
Catalog Number
Ratio
S1354Z-64S32A032
1:1
S1354Z-64S32S032
1:1
S1354Z-64A32A032
1:1
S1354Z-64S32A048
1:1-1/2
S1354Z-64S32S048
1:1-1/2
S1354Z-64A32A048
1:1-1/2
S1354Z-64S32A064
1:2
S1354Z-64S32S064
1:2
S1354Z-64A32A064
1:2
S1354Z-64S32A096
1:3
S1354Z-64S32S096
1:3
S1354Z-64A32A096
1:3
S1354Z-64S32A128
1:4
S1354Z-64S32S128
1:4
S1354Z-64A32A128
1:4
No.
of
Teeth
32
32
32
32
32
32
32
48
32
48
32
48
32
64
32
64
32
64
32
96
32
96
32
96
32
128
32
128
32
128
P.D.
.500
.593
.500
.593
.500
.593
.500
.750
.500
.750
.500
.750
.500
1.000
.500
1.000
.500
1.000
.500
1.000
.500
1.000
.500
1.000
.500
2.000
.500
2.000
.500
2.000
.687
.687
.687
.781
.781
.781
1.031
1.031
1.031
1.281
1.281
1.281
Material
Stainless Steel
Aluminum
Stainless Steel
Stainless Steel
Aluminum
Aluminum
Stainless Steel
Aluminum
Stainless Steel
Stainless Steel
Aluminum
Aluminum
Stainless Steel
Aluminum
Stainless Steel
Stainless Steel
Aluminum
Aluminum
Stainless Steel
Aluminum
Stainless Steel
Stainless Steel
Aluminum
Aluminum
Stainless Steel
Aluminum
Stainless Steel
Stainless Steel
Aluminum
Aluminum
1-201
7
8
9
10
11
12
13
14
15
16
I
R
T
1
2

AGMA 10
1/4 BORE
20 PRESSURE ANGLE
Inch
MATERIAL:
1
Precision
Component
303 Stainless Steel

Sold as Set
.18
A
#6-32 SET SCREW
4
SUB DRILL
.687
5
6
7
8
9
10
11
12
13
14
15
16
.25
+.0005
.2498 -.0000 (TYP)

.500
1/8
INCH COMPONENT
Catalog Number
Ratio
S1346Z-48S30A030
1:1
S1346Z-48S30S030
1:1
S1346Z-48A30A030
1:1
S1346Z-48S30A045
1:1-1/2
S1346Z-48S30S045
1:1-1/2
S1346Z-48A30A045
1:1-1/2
S1346Z-48S30A060
1:2
S1346Z-48S30S060
1:2
S1346Z-48A30A060
1:2
S1346Z-48S30A090
1:3
S1346Z-48S30S090
1:3
S1346Z-48A30A090
1:3
S1346Z-48S30A120
1:4
S1346Z-48S30S120
1:4
S1346Z-48A30A120
1:4
1-202
No.
of
Teeth
30
30
30
30
30
30
30
45
30
45
30
45
30
60
30
60
30
60
30
90
30
90
30
90
30
120
30
120
30
120
P.D.
.625
.687
.625
.687
.625
.687
.625
.937
.625
.937
.625
.937
.625
1.250
.625
1.250
.625
1.250
.625
1.875
.625
1.875
.625
1.875
.625
2.500
.625
2.500
.625
2.500
.812
.812
.812
.937
.937
.937
1.250
1.250
1.250
1.531
1.531
1.531
Material
Stainless Steel
Aluminum
Stainless Steel
Stainless Steel
Aluminum
Aluminum
Stainless Steel
Aluminum
Stainless Steel
Stainless Steel
Aluminum
Aluminum
Stainless Steel
Aluminum
Stainless Steel
Stainless Steel
Aluminum
Aluminum
Stainless Steel
Aluminum
Stainless Steel
Stainless Steel
Aluminum
Aluminum
Stainless Steel
Aluminum
Stainless Steel
Stainless Steel
Aluminum
Aluminum

AGMA 10
1/4 BORE
20 PRESSURE ANGLE
R
Inch
MATERIAL:
1
Precision
Component
303 Stainless Steel

T
1

Sold as Set
.18
A
FOR CLAMPS
SEE INDEX
4
.687
1/32 SAW SLOT
.250 +.000
-.003
+.0005
.2498 -.0000 (TYP)
+.000
.312 -.003
INCH COMPONENT
Catalog Number
Ratio
S1356Z-48S30A030
1:1
S1356Z-48S30S030
1:1
S1356Z-48A30A030
1:1
S1356Z-48S30A045
1:1-1/2
S1356Z-48S30S045
1:1-1/2
S1356Z-48A30A045
1:1-1/2
S1356Z-48S30A060
1:2
S1356Z-48S30S060
1:2
S1356Z-48A30A060
1:2
S1356Z-48S30A090
1:3
S1356Z-48S30S090
1:3
S1356Z-48A30A090
1:3
S1356Z-48S30A120
1:4
S1356Z-48S30S120
1:4
S1356Z-48A30A120
1:4
No.
of
Teeth
30
30
30
30
30
30
30
45
30
45
30
45
30
60
30
60
30
60
30
90
30
90
30
90
30
120
30
120
30
120
P.D.
.625
.687
.625
.687
.625
.687
.625
.937
.625
.937
.625
.937
.625
1.250
.625
1.250
.625
1.250
.625
1.875
.625
1.875
.625
1.875
.625
2.500
.625
2.500
.625
2.500
.812
.812
.812
.937
.937
.937
1.250
1.250
1.250
1.531
1.531
1.531
Material
Stainless Steel
Aluminum
Stainless Steel
Stainless Steel
Aluminum
Aluminum
Stainless Steel
Aluminum
Stainless Steel
Stainless Steel
Aluminum
Aluminum
Stainless Steel
Aluminum
Stainless Steel
Stainless Steel
Aluminum
Aluminum
Stainless Steel
Aluminum
Stainless Steel
Stainless Steel
Aluminum
Aluminum
Stainless Steel
Aluminum
Stainless Steel
Stainless Steel
Aluminum
Aluminum
1-203
7
8
9
10
11
12
13
14
15
16
MITER GEARS 48, 32, 24 & 20 PITCH

20 PRESSURE ANGLE
MATERIAL:
Brass and Steel
Inch
Gears other than standard stock

1
2
M.D.
3
4
P.D.
6
7
INCH COMPONENT
Catalog Number
Brass
9
10
11
12
Steel
No.
of
Teeth
P.D.
B
Bore
+.0002
-.0006
F
E
Face Length
Width
C
Hub
Dia.
D
Hub
Proj.
M.D.
A
A
A
A
A
A
A
1B
1B
1B
1B
1B
1B
1B
4-Y48015
4-Y48018
4-Y32016
4-Y32024
4-Y24024
4-Y24030
4-Y24036
48
48
32
32
24
24
24
15
18
16
24
24
30
36
.313
.375
.500
.750
1.000
1.250
1.500
.1250
.1250
.1875
.1875
.2500
.2500
.3125
3/32
5/64
1/8
5/32
7/32
1/4
1/4
7/32
9/32
11/32
27/64
9/16
37/64
39/64
1/4
5/16
13/32
1/2
5/8
5/8
11/16
1/8
3/16
3/16
1/4
9/32
5/16
5/16
.312
.406
.500
.688
.906
1.031
1.188
A
A
A
A
A
A
A
A
A
1C
1C
1C
1C
1C
1C
1C
1C
1C
4-Y48018
4-Y32016
4-Y32024
4-Y24018
4-Y24024
4-Y20012
4-Y20018
4-Y20020
4-Y20025
48
32
32
24
24
20
20
20
20
18
16
24
18
24
12
18
20
25
.375
.500
.750
.750
1.000
.600
.900
1.000
1.250
.1250
.1875
.1875
.2500
.2500
.2500
.3125
.3750
.3750
.080
.120
.140
.156
.200
.120
.140
.234
.250
9/32
11/32
27/64
9/16
9/16
31/64
5/8
13/16
3/4
5/16
13/32
1/2
5/8
5/8
1/2
5/8
3/4
1
3/16
3/16
1/4
3/8
9/32
5/16
13/32
1/2
7/16
.406
.500
.688
.813
.906
.671
.953
1.125
1.188
13
14
15
16
Pitch
1-204
D810
D790
D787
D190
P1-205
P1-199A
P1-188
P166
A 1M 4--X
2-23-89
REV: 07-20-12 mh
MOLDED MITER GEARS 48, 32, 24 & 16 PITCH

20 PRESSURE ANGLE
MATERIAL:
A - Nylon
B - Nylon (Mineral Filled)
C - Acetal
Inch
Sold as Set
1
2
M.D.
3
C
P.D.
B
E
5
D
6
INCH COMPONENT
Matl.
Code
No.
of
Teeth
P.D.
O.D.
Ref.
1M 4-Y48015
1M 4-Y48018
1M 4-Y48024
C
A
A
15
18
24
.313
.375
.500
.350
.404
.529
1M 4-Y32024
1M 4-Y32016
A
A
24
16
.750
.500
1M 4-Y24024
1M 4-Y24030
1M 4-Y24036
A
A
A
24
30
36
1M 4-Y16016
1M 4-Y16032
A
B
16
32
Catalog Number
48 Pitch
A
A
A
32 Pitch
A
A
24 Pitch
A
A
A
16 Pitch
A
A
B
Bore
E
Length
C
Hub
Dia.
D
Hub
Proj.
M.D.
.125
.125
.187
7/32
9/32
3/8
1/4
21/64
3/8
1/8
3/16
1/4
5/16
13/32
17/32
.800
.550
.187
.187
13/32
11/32
1/2
13/32
3/16
3/16
11/16
1/2
1.000
1.250
1.500
1.045
1.310
1.560
.253
.250
.312
9/16
37/64
39/64
5/8
5/8
11/16
3/16
5/16
5/16
7/8
1-1/32
1-3/16
10
1.000
2.000
1.090
2.088
.375
.500
3/4
7/8
3/4
1-1/4
7/16
3/8
1-1/16
1-9/16
11
+.001
-.002
8
9
12
13
14
15
1-205
REV: 07.27.12 mh
16
MOLDED BEVEL GEARS 48, 32 & 24 PITCH

20 PRESSURE ANGLE
R
T
MATERIAL:
A - Nylon
B - Nylon (Mineral Filled)
C - Acetal
Inch
Specify both part numbers of a pair
1
2
3
M.D.
E
D
P.D.
M.D.
D
B
C
P.D.
6
INCH COMPONENT
7
8
9
10
11
12
13
Catalog Number
48 Pitch
A
A
** A
A
A
*A
32 Pitch
A
A
A
A
A
A
24 Pitch
A
*A
*A
*A
No.
Ratio
of
Teeth
P.D.
O.D.
Ref.
B
Bore
+.001 Length
-.002
C
Hub
Dia.
D
Hub
Proj.
M.D.
1M
1M
1M
1M
1M
1M
3-Y48018
3-Y48036
3-Y48012
3-Y48060
3-Y48012A
3-Y48036A
A
A
A
A
C
C
18
36
12
60
12
36
1:2
1:2
1:5
1:5
1:3
1:3
.375
.750
.250
1.250
.250
.750
.412
.765
.291
1.258
.310
.760
.125
.187
.156
.250
.094
.187
21/64
1/4
5/8
15/64
9/32
5/16
9/32
7/16
19/64
7/16
5/16
7/16
3/16
3/16
15/32
1/8
5/32
3/16
19/32
7/16
1-1/8
3/8
9/16
3/8
1M
1M
1M
1M
1M
1M
3-Y32016
3-Y32032
3-Y32016B
3-Y32048
3-Y32016A
3-Y32064
A
A
C
C
C
C
16
32
16
48
16
64
1:2
1:2
1:3
1:3
1:4
1:4
.500
1.000
.500
1.500
.500
2.000
.556
1.028
.583
1.512
.587
2.009
.187
.187
.187
.250
.188
.252
3/8
7/16
15/32
7/16
15/32
31/64
3/8
9/16
7/16
5/8
7/16
3/4
3/16
1/4
17/64
5/16
7/32
5/16
23/32
19/32
1-1/32
21/32
1-1/4
11/16
1M
1M
1M
1M
3-Y24018
3-Y24036
3-Y24024
3-Y24048
A
A
B
B
18
36
24
48
1:2
1:2
1:2
1:2
.750
1.500
1.000
2.000
.860
1.530
1.110
2.030
.187
.250
.250
.312
17/32
1/2
5/8
1/2
9/16
7/8
11/16
1-1/8
1/4
5/16
9/32
5/16
1-1/16
25/32
1-3/8
15/16
* These gears only, no recess at tooth side of bore.

** Bore is blind hole 7/16 from hub end.
Not full dia. hub, has 3 evenly spaced recesses.
14
15
16
Matl
Code
1-206
BEVEL GEARS 48, 32 & 24 PITCH

20 PRESSURE ANGLE
MATERIAL:
Brass or Steel (See *)
Inch
Gears of different pairs will

not run together
T
1
2
M.D.
E
P.D.
D
E
B
M.D.
O.D.
C
B
C
P.D.
O.D.
INCH COMPONENT
Catalog Number
Pitch 48
A
A
*A
*A
*A
A
A
*A
*A
*A
A
A
Pitch 32
A
A
A
A
A
A
A
A
Pitch 24
A
A
A
A
No.
of
Teeth
Ratio
P.D.
O.D.
B
Bore
+.0002
-.0006
E
Length
C
Hub
Dia.
D
Hub
Proj.
M.D.
Dim.
1B
1B
1C
1C
1C
1B
1B
1C
1C
1C
1B
1B
3-Y48018
3-Y48036
3-Y48018
3-Y48036A
3-Y48036B
3-Y48012
3-Y48036A
3-Y48012
3-Y48036C
3-Y48036D
3-Y48012A
3-Y48048
18
36
18
36
36
12
36
12
36
36
12
48
1:2
1:2
1:2
1:2
1:2
1:3
1:3
1:3
1:3
1:3
1:4
1:4
.375
.750
.375
.750
.750
.250
.750
.250
.750
.750
.250
1.000
.410
.760
.422
.760
.760
.290
.755
.290
.765
.765
.305
1.005
.1250
.1875
.1250
.1875
.2500
.1250
.1875
.1250
.1875
.2500
.1250
.1875
.328
.245
.328
.250
.250
.281
.250
.281
.250
.250
.340
.250
9/32
7/16
9/32
7/16
7/16
7/32
7/16
7/32
7/16
7/16
7/32
5/8
.195
.190
13/64
3/16
.187
.187
.187
3/16
3/16
3/16
.210
.180
.600
.425
.594
.437
.437
.562
.375
.562
.375
.375
.718
.400
1B
1B
1B
1B
1B
1B
1B
1B
3-Y32024
3-Y32032
3-Y32016
3-Y32032A
3-Y32016A
3-Y32048
3-Y32016B
3-Y32064
24
32
16
32
16
48
16
64
1:1.3
1:1.3
1:2
1:2
1:3
1:3
1:4
1:4
.750
1.000
.500
1.000
.500
1.500
.500
2.000
.795
1.035
.560
1.017
.575
1.515
.560
2.012
.1875
.2500
.1875
.1875
.1875
.2500
.1875
.3125
.440
.406
.375
.375
.525
.440
.485
.440
9/16
9/16
3/8
9/16
7/16
5/8
3/8
1-1/32
.230
.250
.187
.250
.260
.320
.230
.318
.765
.720
.720
.582
1.025
.656
1.250
.685
1B
1B
1B
1B
3-Y24018
3-Y24036
3-Y24024
3-Y24048
18
36
24
48
1:2
1:2
1:2
1:2
.750
1.500
1.000
2.000
.823
1.535
1.100
2.035
.1875
.2500
.2500
.3125
.531
.452
.641
.500
9/16
11/16
11/16
5/8
.265
.312
.290
.325
1.055
.780
1.375
.932
* These gears are made of Steel.
7
8
9
10
11
12
13
14
15
1-207
16
I
R
T
1
2
3
WORM GEARS & WORMS 64 PITCH

AGMA 10
RIGHT-HAND
SINGLE, DOUBLE & QUADRUPLE THREAD
1/8, 3/16 & 1/4 BORE
5
6
7
1
Precision
Component
Worm Gears - Bronze QQ-B-637 Alloy 464

Worms - 303 Stainless Steel
3/16

Worm Gears - Teeth not listed, different bore
sizes, clamp type hub.
Worms - Different bore size and/or material,
SUB DRILL
P.D.
B A
WORM GEARS
+.0005
-.0000
.1248
.1873
.2498
A
Dia.
Screw
Size
.312
.375
.500
#2-56
#4-40
#6-32
SET
SCREW
7/64
.22
B Bore Size
.1248 Bore 3
.1873 Bore 4
.2498 Bore 6
Worm Gear
Speed No. Teeth

Ratio = No. Threads
INCH COMPONENT
CATALOG NUMBER
S1C8 Z-P064B
8
9
Inch
MATERIAL:
No. of
Teeth Code
040
045
050
055
060
065
070
075
080
No. of
Teeth
Code
Thread Code
Single
S
Double
D
Quadruple Q
Example: S1C86Z-P064B060S is a .2498 in.

Bore Worm Gear with 60 Teeth,
Single Threaded.
31/32
3/4
No.
of
P.D.
Teeth
40
45
50
55
60
65
70
75
80
No.
No. of
of
P.D.
Teeth Code Teeth
.6250
.7031
.7813
.8594
.9375
1.0156
1.0938
1.1719
1.2500
085
090
095
100
105
110
115
120
* 180
* 360
85
90
95
100
105
110
115
120
180
360
1.3281
1.4063
1.4844
1.5625
1.6406
1.7187
1.7969
1.8750
2.8125
5.6250
*Available with .2498 in. bores only.

7/64
SUB DRILL
10
.531 .5000
COUNTERBORE SET
SCREW
RELIEF ON 1/8
BORES ONLY
11
WORMS
12
13
14
15
16
S1D93Z-P064SS
S1D94Z-P064SS
S1D96Z-P064SS
S1D93Z-P064SD
S1D94Z-P064SD
S1D96Z-P064SD
S1D93Z-P064SQ
S1D94Z-P064SQ
S1D96Z-P064SQ
1-208
Worm
INCH COMPONENT
Catalog Number
+.0005
-.0000
H
Dia.
Thread
Lead
Lead
Angle
Screw
Size
.1248
.1873
.2498
.1248
.1873
.2498
.1248
.1873
.2498
.312
.375
.437
.312
.375
.437
.312
.375
.437
Single
Single
Single
Double
Double
Double
Quadruple
Quadruple
Quadruple
.04908
.04908
.04908
.09817
.09817
.09817
.19635
.19635
.19635
147'
147'
147'
335'
335'
335'
77.5'
77.5'
77.5'
#2-56
#4-40
#6-32
#2-56
#4-40
#6-32
#2-56
#4-40
#6-32
ANTI-BACKLASH WORM GEARS 64 PITCH

AGMA 10
RIGHT-HAND
1/8, 3/16 & 1/4 BORE
R
Inch
1
Precision
Component
MATERIAL:
Gears - Bronze QQ-B-637 Alloy 464

Springs - 302 Stainless Steel, Spring Tempered
T
1
Available on request:
Teeth not listed, different bore size.
2
3
.427
.427
3/16
3/16
SET SCREW
SUPPLIED
A
Dia.
.312
.375
.500
B
Bore
+.0005
-.0000
.1248
.1873
.2498
C
Dia.
+.000
-.003
.188
.250
.312
Screw
Size
.1248 Bore 3
.1873 Bore 4
.2498 Bore 6
Hub Style
Pin Type
Clamp Type C
* Thread Code
Single
S
Double
D
Quadruple Q
B P.D.
7
Pin Type
MATCHING WORMS
No. of
Teeth Code
096
100
110
120
130
140
No.
of
Teeth
96
100
110
120
130
140
P.D.
1.5000
1.5625
1.7187
1.8750
2.0312
2.1875
1/8
Clamp Type
#2-56
#4-40
#6-32
No. of
Teeth
Code
SUB
DRILL
FOR CLAMPS
SEE INDEX
INCH COMPONENT
CATALOG NUMBER
S1B8 A- 064B
B Bore Size
P.D.
* Thread
Single
Double
Quadruple
Worms
S1D93Z-P064SS
S1D94Z-P064SS
S1D96Z-P064SS
S1D93Z-P064SD
S1D94Z-P064SD
S1D96Z-P064SD
S1D93Z-P064SQ
S1D94Z-P064SQ
S1D96Z-P064SQ
8
9
10
11
12
13
14
Example: S1B86A-C064B120Q is a .2498 Bore

Clamp Type Anti-Backlash Worm Gear with
120 Teeth, Quadruple Threaded.
15
1-209
16
I
R
T
1
2
3
WORM GEARS & WORMS 48 PITCH

AGMA 10
RIGHT-HAND
1/8, 3/16 & 1/4 BORE
5
6
7
3/16

Worm Gears - Teeth not listed, different bore
sizes, clamp type hub.
Worms - Different bore size and/or material,
SUB DRILL
P.D.
+.0005
-.0000
.1248
.1873
.2498
Screw
Size
.312
.375
.500
#2-56
#4-40
#6-32
SET
SCREW
7/64
.22
INCH COMPONENT
CATALOG NUMBER
S1C8 Z-P048B
B Bore Size
.1248 Bore 3
.1873 Bore 4
.2498 Bore 6
Worm Gear
Speed No. Teeth

Ratio = No. Threads
No. of
Teeth Code
030
035
040
045
050
055
060
065
070
075
No. of
Teeth
Code
Thread Code
Single (14-1/2 P.A.) S
Double (20 P.A.)
D
Quadruple (25 P.A.) Q
Example: S1C83Z-P048B040D is a .1248

Bore Worm Gear with 40 Teeth,
Double Threaded.
3/4
11
15
16
30
35
40
45
50
55
60
65
70
75
No.
No. of
of
P.D.
Teeth Code Teeth
.6250
.7292
.8333
.9375
1.0417
1.1459
1.2500
1.3541
1.4583
1.5625
080
085
090
095
100
105
110
115
120
* 180
80
85
90
95
100
105
110
115
120
180
1.6667
1.7707
1.8750
1.9790
2.0833
2.1875
2.2917
2.3959
2.5000
3.7500
3/32
SUB DRILL
.375 .3333
14
No.
of
P.D.
Teeth
*Available with .2498 bores only.
10
13
B A
WORM GEARS
9/16
12
1
Precision
Component
Worm Gears - Bronze QQ-B-637 Alloy 464

Worms - 303 Stainless Steel
8
9
Inch
MATERIAL:
COUNTERBORE SET
SCREW
RELIEF ON 1/8
BORES ONLY
WORMS
.312
WORM
INCH COMPONENT
B
Catalog Number
+.0005
-.0000
Thread
P.A.
Lead
Lead
Angle
Screw
Size
S1D93Z-P048SS
S1D94Z-P048SS
S1D93Z-P048SD
S1D94Z-P048SD
S1D93Z-P048SQ
S1D94Z-P048SQ
.1248
.1873
.1248
.1873
.1248
.1873
Single
Single
Double
Double
Quadruple
Quadruple
14-1/2
14-1/2
20
20
25
25
.0654
.0654
.1309
.1309
.2618
.2618
335'
335'
77'
77'
142'
142'
#2-56
#4-40
#2-56
#4-40
#2-56
#4-40
1-210
ANTI-BACKLASH WORM GEARS 48 PITCH

AGMA 10
RIGHT-HAND
1/8, 3/16 & 1/4 BORE
R
Inch
MATERIAL:
1
Precision
Component
Gears - Bronze QQ-B-637 Alloy 464

Springs - 302 Stainless Steel Spring Tempered
T
1

Teeth not listed, different bore size.
2
3
.427
.427
3/16
3/16
SET SCREW
SUPPLIED
P.D.
A
Dia.
B
Bore Dia.
.312
.375
.500
+.0005
-.0000
.1248
.1873
.2498
C
Dia.
+.000
-.003
.188
.250
.312
B Bore Size
.1248 Bore 3
.1873 Bore 4
.2498 Bore 6
No. of
Teeth
Code
Hub Style
Pin Type
P
Clamp Type C
* Thread Code
Single (14-1/2 P.A.) S
Double (20 P.A.)
D
Quadruple (25 P.A.) Q
MATCHING WORMS
No. of
Teeth Code
No.
of
Teeth
P.D.
070
072
080
090
096
100
70
72
80
90
96
100
1.4583
1.5000
1.6667
1.8750
2.0000
2.0833
6
7
1/8
Pin Type
#2-56
#4-40
#6-32
INCH COMPONENT
CATALOG NUMBER
S1B8 A- 048B
B P.D.
Clamp Type
Screw
Size
SUB
DRILL
FOR CLAMPS
SEE INDEX
* Thread
Worms
Single
(14-1/2 P.A.)
Double
(20 P.A.)
Quadruple
(25 P.A.)
S1D93Z-P048SS
S1D94Z-P048SS
S1D93Z-P048SD
S1D94Z-P048SD
S1D93Z-P048SQ
S1D94Z-P048SQ
8
9
10
11
12
13
14
Example: S1B84A-P048B080D is a .1873 Bore

Pin Type Anti-Backlash Worm Gear with 80
Teeth, Double Threaded.
15
1-211
16
D810
D790
D787
D190
P1-212
P1-205
P1-194
P178
A 1(B,C,Q)..-N--X
P1 of 3
9-20-89
REV: 07.11.12 mh
WORM GEARS AND WORMS 48 PITCH

RIGHT-HAND
SINGLE THREAD
R
Inch
MATERIAL:
Worm Gears - Bronze

Worms - Steel
SPECIFICATIONS, WORMS:
T
1
Lead: .0654
Lead Angle: 3 35
2
3
1/8
.375
B C
P.D.
3/16
9/16
3/4
#47 DRILL
(THRU BOTH WALLS)
E
Worm Gear
.333
.260
Worm
INCH COMPONENT
Catalog Number
Worm Gears - Bronze
A 1B 6-N48020
A 1B 6-N48024
A 1B 6-N48030
A 1B 6-N48036
A 1B 6-N48040
A 1B 6-N48048
A 1B 6-N48060
A 1B 6-N48072
A 1B 6-N48080
A 1B 6-N48096
A 1B 6-N48100
A 1B 6-N48120
Catalog Number
Worms - Steel
A 1C 5-N48
A 1Q 5-N48
A 1Q55-N48
B
Bore
E
Length
C
Hub
Dia.
D
Hub
Proj.
5/16
5/16
3/8
3/8
3/8
3/8
3/8
3/8
7/16
7/16
7/16
7/16
11/32
3/8
7/16
1/2
1/2
1/2
5/8
1/2
5/8
9/16
11/16
9/16
3/16
3/16
1/4
1/4
1/4
1/4
1/4
1/4
5/16
5/16
5/16
5/16
No.
of
Teeth
P.D.
20
24
30
36
40
48
60
72
80
96
100
120
.417
.500
.625
.750
.833
1.000
1.250
1.500
1.666
2.000
2.083
2.500
B
Bore
B
Tolerance
Finish
12
.1875
.1875
.1875
+.0008/-.0000
+.0010/-.0000
+.0008/-.0000
Soft
Hardened & Polished
Hardened & Ground
13
+.0010
-.0000
.1869
.1869
.1869
.1869
.1869
.1869
.1869
.1869
.2494
.3119
.2494
.3119
8
9
10
11
14
15
1-212
REV: 07.18.12 mh
16
D810
D790
D787
D190
P1-213
P1-206
P1-195
P179
A 1(B,C,Q)..-Y--X
P1 of 3
9-20-89
REV: 7.5.12 JF

RIGHT-HAND
DOUBLE THREAD
20 PRESSURE ANGLE
R
Inch
MATERIAL:
Worm Gears - Bronze

Worms - Steel
T
1
Lead: .1309
Lead Angle: 7 7
For engineering assistance for all SDP components,

call on our applications engineers.
2
3
D
1/8
.375
B C
P.D.
3/16
9/16
3/4
#47 DRILL
(THRU BOTH WALLS)
E
Worm Gear
.260
Worm
Worm Gears - Bronze

A 1B 6-Y48020
A 1B 6-Y48024
A 1B 6-Y48030
A 1B 6-Y48036
A 1B 6-Y48040
A 1B 6-Y48050
A 1B 6-Y48060
A 1B 6-Y48072
A 1B 6-Y48096
A 1B 6-Y48100
A 1B 6-Y48120
Catalog Number
Worms - Steel
A 1C 5-Y48
A 1Q 5-Y48
A 1Q55-Y48
B
Bore
E
Length
C
Hub
Dia.
D
Hub
Proj.
5/16
3/8
3/8
3/8
3/8
3/8
3/8
3/8
7/16
7/16
7/16
11/32
3/8
7/16
1/2
1/2
1/2
5/8
1/2
9/16
11/16
9/16
3/16
1/4
1/4
1/4
1/4
1/4
1/4
1/4
5/16
5/16
5/16
No.
of
Teeth
P.D.
20
24
30
36
40
50
60
72
96
100
120
.417
.500
.625
.750
.833
1.041
1.250
1.500
2.000
2.083
2.500
B
Bore
B
Tolerance
Finish
.1875
.1875
.1875
+.0008/-.0000
+.0010/-.0000
+.0010/-.0000
Soft
Hardened & Polished
Hardened & Ground
+.0010
-.0000
.1869
.1869
.1869
.1869
.1869
.1869
.1869
.1869
.3119
.2494
.3119
5
6
INCH COMPONENT
Catalog Number
.333
7
8
9
10
11
12
13
14
15
1-213
REV: 07.18.12 mh
16
D810
D790
D787
D190
P1-214
P1-207
P1-196
P180
A 1(B,C,Q)..-Z--X
P1 of 3
9-20-89
REV: 07.11.12 mh

RIGHT-HAND
QUADRUPLE THREAD
25 PRESSURE ANGLE
R
Inch
MATERIAL:
Worm Gears - Bronze

Worms - Steel
T
1
Lead: .2618
Lead Angle: 14 2
2
3
D
1/8
.375
B C
P.D.
3/16
9/16
3/4
#47 DRILL
(THRU BOTH WALLS)
E
Worm Gear
.333
.260
Worm
INCH COMPONENT
Catalog Number
Worm Gears - Bronze
A 1B 6-Z48020
A 1B 6-Z48024
A 1B 6-Z48030
A 1B 6-Z48036
A 1B 6-Z48040
A 1B 6-Z48048
A 1B 6-Z48050
A 1B 6-Z48060
A 1B 6-Z48072
A 1B 6-Z48080
A 1B 6-Z48096
A 1B 6-Z48120
Catalog Number
Worms - Steel
A 1C 5-Z48
A 1Q 5-Z48
A 1Q55-Z48
B
Bore
E
Length
C
Hub
Dia.
D
Hub
Proj.
5/16
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
7/16
7/16
7/16
11/32
3/8
7/16
1/2
1/2
1/2
1/2
5/8
1/2
5/8
9/16
9/16
3/16
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
5/16
5/16
5/16
No.
of
Teeth
P.D.
20
24
30
36
40
48
50
60
72
80
96
120
.417
.500
.625
.750
.833
1.000
1.041
1.250
1.500
1.666
2.000
2.500
B
Bore
B
Tolerance
Finish
12
.1875
.1875
.1875
+.0008/-.0000
+.0010/-.0000
+.0010/-.0000
Soft
Hardened & Polished
Hardened & Ground
13
+.0010
-.0000
.1869
.1869
.1869
.1869
.1869
.1869
.1869
.1869
.2494
.3119
.3119
.3119
8
9
10
11
14
15
1-214
REV: 07.18.12 mh
16
D810
D790
D787
D190
A 1(B,C,Q)..-N--X
P2 of 3
6-13-89
REV: 07.11.12 mh
P1-215
P1-208
P1-197
P181

RIGHT-HAND
SINGLE THREAD
R
Inch
MATERIAL:
Worm Gears - Bronze

Worms - Steel
Lead: .0982
Lead Angle: 4 5
For engineering assistance for all SDP

components, call on our applications engineers.
.500
B C
P.D.
Catalog Number
Worms - Steel
A 1C 5-N32
A 1C55-N32
* A 1C55-5N32
A 1C55-55N32
A 1Q55-N32
A 1Q55-5N32
A 1Q55-55N32
.438
Worm Gear
INCH COMPONENT
Worm Gears - Bronze

A 1B 6-N32020
A 1B 6-N32020A
A 1B 6-N32024
A 1B 6-N32030
A 1B 6-N32030A
A 1B 6-N32036
A 1B 6-N32040
A 1B 6-N32040A
A 1B 6-N32050
A 1B 6-N32050A
A 1B 6-N32060
A 1B 6-N32060A
A 1B 6-N32072
A 1B 6-N32080
A 1B 6-N32080A
A 1B 6-N32096
A 1B 6-N32096A
A 1B 6-N32100
A 1B 6-N32100A
A 1B 6-N32120
E
#47 DRILL
(THRU BOTH WALLS)
Catalog Number
Worm
P.D.
B
Bore
+.001
-.000
F
Face
Width
20
20
24
30
30
36
40
40
50
50
60
60
72
80
80
96
96
100
100
120
.625
.625
.750
.938
.938
1.125
1.250
1.250
1.562
1.562
1.875
1.875
2.250
2.500
2.500
3.000
3.000
3.125
3.125
3.750
.1869
.1869
.1869
.1869
.1869
.1869
.2494
.2494
.2494
.2494
.2494
.2494
.3119
.3119
.3119
.3119
.3119
.3119
.3119
.3119
3/16
7/32
3/16
3/16
7/32
3/16
3/16
7/32
3/16
7/32
3/16
7/32
3/16
3/16
7/32
3/16
7/32
3/16
7/32
3/16
B
Bore
+.0008
-.0000
F
Face
Width
E
Length
C
Hub
Dia.
D
Hub
Proj.
Finish
.1875
.1875
.1875
.2500
.2187
.2187
.2500
11/16
1/2
1/2
1/2
11/16
11/16
1/2
7/8
11/16
1/2
11/16
7/8
7/8
11/16
.320
.320
Hubless
.320
.320
.340
.340
3/16
3/16
Hubless
3/16
3/16
3/16
3/16
Soft
Soft
Soft
Soft
Hardened & Polished
Hardened & Ground
Hardened & Polished
No.
of
Teeth
E
Length
C
Hub
Dia.
D
Hub
Proj.
7/16
15/32
7/16
7/16
15/32
7/16
1/2
15/32
1/2
17/32
1/2
17/32
1/2
1/2
17/32
1/2
17/32
1/2
17/32
1/2
1/2
1/2
1/2
5/8
5/8
1/2
5/8
5/8
5/8
5/8
11/16
11/16
5/8
11/16
11/16
11/16
11/16
11/16
3/4
3/4
1/4
1/4
1/4
1/4
1/4
1/4
5/16
1/4
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
* This worm has no cross-drilled holes.
1-215
REV: 07.18.12 mh
6
7
8
9
10
11
12
13
14
15
16

RIGHT-HAND
DOUBLE THREAD
20 PRESSURE ANGLE
R
Inch
MATERIAL:
Worm Gears - Bronze

Worms - Steel
T
1
Lead: .1963
Lead Angle: 8 8
2
3
.500
P.D.
B C
3/16
11/16
.438
B
C
7/8
#47 DRILL
(THRU BOTH WALLS)
E
Worm Gear
Worm
INCH COMPONENT
Catalog Number
Worm Gears - Bronze
A 1B 6-Y32020A
A 1B 6-Y32030
A 1B 6-Y32030A
A 1B 6-Y32040A
A 1B 6-Y32048
A 1B 6-Y32050
A 1B 6-Y32060
A 1B 6-Y32072
A 1B 6-Y32080
A 1B 6-Y32100
* A 1B 6-Y32120
No.
of
Teeth
P.D.
20
30
30
40
48
50
60
72
80
100
120
.625
.938
.938
1.250
1.500
1.562
1.875
2.250
2.500
3.125
3.750
+.0010
-.0000
B
Bore
F
Face
Width
E
Length
C
Hub
Dia.
D
Hub
Proj.
.1869
.1869
.1869
.2494
.1869
.2494
.2494
.3119
.3119
.3119
.3119
7/32
3/16
7/32
7/32
3/16
3/16
3/16
3/16
3/16
3/16
3/16
15/32
7/16
15/32
15/32
7/16
1/2
1/2
1/2
1/2
1/2
1/2
1/2
5/8
5/8
5/8
1/2
5/8
11/16
5/8
11/16
11/16
3/4
1/4
1/4
1/4
5/16
1/4
5/16
5/16
5/16
5/16
5/16
5/16
Catalog Number
Worms - Steel
A 1C 5-Y32
A 1Q 5-Y32
A 1Q55-5Y32
7
8
9
10
11
B
Bore
B
Tolerance
C
Hub
Dia.
Finish
12
.1875
.2187
.2187
+.0008/-.0000
+.0010/-.0000
+.0008/-.0000
.320
.320
.340
Soft
Hardened & Polished
Hardened & Ground
13
14
15
1-216
REV: 07.11.12 mh
16
D810
D790
D787
D190
P1-217
P1-210
P1-199
P183
A 1(B,C,Q)..-Z--X
P2 of 3
2-3-89
REV: 07.16.12 mh

RIGHT-HAND
QUADRUPLE THREAD
25 PRESSURE ANGLE
R
Inch
MATERIAL:
Worm Gears - Bronze

Worms - Steel
T
1
Lead: .3927
Lead Angle: 15 57
Discounts available for

3/16
.500
B C
P.D.
11/16
Worm Gear
.438
7/8
#47 DRILL
(THRU BOTH WALLS)
3/16
.340
Worm
4
5
INCH COMPONENT
Catalog Number
Worm Gears - Bronze
A 1B 6-Z32020
A 1B 6-Z32024
A 1B 6-Z32030
A 1B 6-Z32036
A 1B 6-Z32040
A 1B 6-Z32048
A 1B 6-Z32050
A 1B 6-Z32060
A 1B 6-Z32072
A 1B 6-Z32080
A 1B 6-Z32096
A 1B 6-Z32100
Catalog Number
Worms - Steel
A 1C 5-Z32
A 1Q 5-Z32
A 1Q55-Z32
B
Bore
E
Length
C
Hub
Dia.
D
Hub
Proj.
7/16
7/16
7/16
7/16
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
5/8
1/2
5/8
1/2
5/8
11/16
5/8
11/16
11/16
11/16
1/4
1/4
1/4
1/4
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
No.
of
Teeth
P.D.
20
24
30
36
40
48
50
60
72
80
96
100
.625
.750
.938
1.125
1.250
1.500
1.562
1.875
2.250
2.500
3.000
3.125
B
Bore
B
Tolerance
Finish
.1875
.2187
.2187
+.0008/-.0000
+.0010/-.0000
+.0010/-.0000
Soft
Hardened & Polished
Hardened & Ground
+.0010
-.0000
.1869
.1869
.1869
.1869
.2494
.1869
.2494
.2494
.3119
.3119
.3119
.3119
8
9
10
11
12
13
14
15
1-217
REV: 07.18.12 mh
16
D810
D790
D787
D190
P1-218
P1-211
P1-200
P184
A 1(B,C,Q)..-N--X
P3 of 3
1-30-89
REV: 07.11.12 mh

RIGHT-HAND
SINGLE THREAD
R
Inch
MATERIAL:
Worm Gears - Bronze

Worms - Steel
Lead: .1309
Lead Angle: 4 46
If your design calls for a modified part,

send us your print. Most modifications can be
done with standard tooling for a nominal charge.
2
3
1/4
.583
B C
P.D.
1/4
.500
Worm Gear
E
#42 DRILL
(THRU BOTH WALLS)
3/8
Worm
Worm Gears - Bronze

A 1B 6-N24018
A 1B 6-N24020
A 1B 6-N24024
A 1B 6-N24030
A 1B 6-N24036
A 1B 6-N24040
A 1B 6-N24048
A 1B 6-N24050
A 1B 6-N24060
A 1B 6-N24072
A 1B 6-N24080
A 1B 6-N24096
A 1B 6-N24096A
A 1B 6-N24100
Catalog Number
Worms - Steel
A 1C 5-N24
A 1C55-N24
A 1Q55-N24
A 1Q55-5N24
B
Bore
E
Length
C
Hub
Dia.
D
Hub
Proj.
1/2
9/16
9/16
9/16
9/16
9/16
9/16
9/16
9/16
9/16
5/8
5/8
5/8
5/8
1/2
5/8
5/8
5/8
5/8
1/2
3/4
3/4
3/4
3/4
7/8
7/8
7/8
7/8
1/4
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
3/8
3/8
3/8
3/8
No.
of
Teeth
P.D.
18
20
24
30
36
40
48
50
60
72
80
96
96
100
.750
.833
1.000
1.250
1.500
1.667
2.000
2.083
2.500
3.000
3.333
4.000
4.000
4.167
.1869
.1869
.1869
.1869
.1869
.2494
.3119
.3119
.3119
.3119
.3119
.3119
.3744
.3744
B
Bore
+.0008
-.0000
F
Face
Width
E
Length
Finish
.1875
.2500
.2500
.2500
13/16
5/8
13/16
13/16
1-1/16
7/8
1-1/16
1-1/16
Soft
Soft
Hardened & Polished
Hardened & Ground
+.0010
-.0000
5
6
INCH COMPONENT
Catalog Number
7
8
9
10
11
12
13
14
15
1-218
REV: 07.18.12 mh
16
D810
D790
D787
D190
P1-219
P1-212
P1-201
P185
A 1(B,C,Q)..-Y--X
P3 of 3
2-13-89
REV 07.11.12 mh

RIGHT-HAND
DOUBLE THREAD
20 PRESSURE ANGLE
R
Inch
MATERIAL:
Worm Gears - Bronze

Worms - Steel
T
1
Lead: .2618
Lead Angle: 9 28
2
3
1/4
.583
B C
P.D.
1/4
13/16
.500
B
1-1/16
3/8
#42 DRILL
(THRU BOTH WALLS)
E
Worm Gear
Worm
INCH COMPONENT
Catalog Number
Worm Gears - Bronze
A 1B 6-Y24018
A 1B 6-Y24020
A 1B 6-Y24024
A 1B 6-Y24030
A 1B 6-Y24036
A 1B 6-Y24040
A 1B 6-Y24048
A 1B 6-Y24050
A 1B 6-Y24060
A 1B 6-Y24072
A 1B 6-Y24080
A 1B 6-Y24096
Catalog Number
Worms - Steel
A 1C 5-Y24
A 1Q 5-Y24
A 1Q55-Y24
B
Bore
E
Length
C
Hub
Dia.
D
Hub
Proj.
1/2
9/16
9/16
9/16
9/16
9/16
9/16
9/16
9/16
9/16
5/8
5/8
1/2
5/8
5/8
5/8
5/8
5/8
3/4
3/4
3/4
3/4
7/8
7/8
1/4
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
3/8
3/8
No.
of
Teeth
P.D.
18
20
24
30
36
40
48
50
60
72
80
96
.750
.833
1.000
1.250
1.500
1.667
2.000
2.083
2.500
3.000
3.333
4.000
B
Bore
B
Tolerance
Finish
12
.1875
.2500
.2500
+.0008/-.0000
+.0010/-.0000
+.0010/-.0000
Soft
Hardened & Polished
Hardened & Ground
13
+.0010
-.0000
.1869
.1869
.1869
.1869
.1869
.2494
.3119
.3119
.3119
.3119
.3119
.3744
8
9
10
11
14
15
1-219
REV: 07.18.12 mh
16
D810
D790
D787
D190
P1-220
P1-213
P1-202
P186
A 1(B,C,Q)..-Z--X
P3 of 3
2-13-89
REV: 07.11.12 mh

RIGHT-HAND
QUADRUPLE THREAD
25 PRESSURE ANGLE
R
Inch
MATERIAL:
Worm Gears - Bronze

Worms - Steel
T
1
Lead: .5236
Lead Angle: 18 26
2
3
1/4
.583
B C
P.D.
1/4
13/16
1-1/16
#42 DRILL
(THRU BOTH WALLS)
E
Worm Gear
.500
3/8
Worm
INCH COMPONENT
Catalog Number
Worm Gears - Bronze
A 1B 6-Z24018
A 1B 6-Z24020
A 1B 6-Z24024
A 1B 6-Z24030
A 1B 6-Z24040
A 1B 6-Z24048
A 1B 6-Z24050
A 1B 6-Z24060
A 1B 6-Z24072
A 1B 6-Z24080
A 1B 6-Z24096
A 1B 6-Z24100
Catalog Number
Worms - Steel
A 1C 5-Z24
A 1Q 5-Z24
A 1Q55-Z24
B
Bore
E
Length
C
Hub
Dia.
D
Hub
Proj.
1/2
9/16
9/16
9/16
9/16
9/16
9/16
9/16
9/16
5/8
5/8
5/8
1/2
5/8
5/8
5/8
5/8
3/4
3/4
3/4
3/4
7/8
7/8
7/8
1/4
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
3/8
3/8
3/8
No.
of
Teeth
P.D.
18
20
24
30
40
48
50
60
72
80
96
100
.750
.833
1.000
1.250
1.667
2.000
2.083
2.500
3.000
3.333
4.000
4.167
B
Bore
B
Tolerance
Finish
12
.1875
.2500
.2500
+.0008/-.0000
+.0010/-.0000
+.0010/-.0000
Soft
Hardened & Polished
Hardened & Ground
13
+.0010
-.0000
.1869
.1869
.1869
.1869
.2494
.3119
.3119
.3119
.3119
.3119
.3744
.3744
8
9
10
11
14
15
1-220
REV: 07.18.12 mh
16
MOLDED WORM GEARS AND WORMS 48, 32 & 24 PITCH

RIGHT-HAND
SINGLE THREAD
R
Inch
MATERIAL:
Worm Gears - 48 & 32 Pitch - Acetal

24 Pitch - Mineral Filled Nylon, Black
Worms - Nylon
SPECIFICATIONS:
These are in effect HELICAL gears with

a helix angle compatible with the worms.
When in mesh, they operate as a worm
pair at right angles. These gears will also
mesh with standard-stock steel or
brass worms.
T
1
B
C
G H
3
J (TYP)
Worm Gear
F
5/32
O.D. P.D.
E
.19 * ACROSS FLATS, HEX (REF.)
Worm
6
7
WORM GEARS
INCH COMPONENT
48 Pitch
A 1M
A 1M
A 1M
A 1M
32 Pitch
A 1M
A 1M
A 1M
A 1M
24 Pitch
A 1M
A 1M
A 1M
A 1M
B
C
F
E
Bore Face
Length Hub
+.001
Dia.
-.002 Width
D
Hub
Proj.
G
Dia.
H
Dia.
11/32
7/16
1/2
1/2
3/16
1/4
1/4
1/4
7/16
7/16
1/2
1/2
1/2
5/8
5/8
5/8
1/4
1/4
5/16
5/16
31/32
1-19/64
5/8
5/8
1/32
3/64
9/16
9/16
9/16
9/16
5/8
5/8
3/4
3/4
5/16
5/16
5/16
5/16
15/16 15/32
1-23/64 3/4
1-25/32 3/4
F
Face
Width
E
Length
C
Hub
Dia.
D
Hub
Proj.
33/64
41/64
41/64
45/64
53/64
57/64
.26
.32
.37
3/16
3/16
1/4
No.
of
Teeth
P.D.
O.D.
6-N48020
6-N48030
6-N48040
6-N48050
20
30
40
50
.417
.625
.833
1.042
.458
.667
.875
1.084
.187
.187
.187
.187
3/16
3/16
3/16
3/16
3/8
7/16
7/16
7/16
6-N32020
6-N32030
6-N32040
6-N32050
20
30
40
50
.625
.938
1.250
1.562
.687
1.000
1.312
1.625
.187
.187
.250
.250
3/16
3/16
3/16
3/16
6-N24020
6-N24030
6-N24040
6-N24050
20
30
40
50
.833
1.250
1.667
2.083
.917
1.333
1.750
2.167
.187
.187
.312
.312
1/4
1/4
1/4
1/4
Catalog Number
1/16
1/16
1/16
9
10
11
12
13
WORMS
Catalog Number
Pitch
P.D.
O.D.
A 1M 5-N48
A 1M 5-N32
A 1M 5-N24
48
32
24
.333
.438
.500
.375
.500
.583
B
Bore
+.001
-.002
.187
.187
.187
* Tooling feature only, size may vary.
1-221
14
15
16
D810
D790
D787
D190
757
P1-222
P1-215
P1-204
P188
P40
A 1T 6--X
P1 OF 2
2-8-89
REV: 7.12.12 JF
MOLDED WORM GEARS WITH INSERT 48, 32 & 24 PITCH

RIGHT-HAND
SINGLE THREAD
R
Inch
MATERIAL:

24 Pitch - Mineral Filled Nylon
Insert - Brass
SPECIFICATIONS:
These are, in effect, helical gears with a helix angle
compatible with their mating worms. When in mesh, the two
operate as a pair at right angles. These gears will also mesh
with standard-stock steel or brass worms.
Gears with:
D
2

.1250
#2-56
.1875
#4-40
*.2500
#6-32
.3125
#8-32
SUB DRILL
SET SCREW
G H
* Catalog Number A 1T 6-N244008S

has a #8-32 set screw & sub drill.
5
J (TYP)
48 Pitch
A 1T
A 1T
A 1T
A 1T
A 1T
A 1T
A 1T
32 Pitch
A 1T
A 1T
A 1T
A 1T
A 1T
A 1T
A 1T
A 1T
24 Pitch
A 1T
A 1T
A 1T
A 1T
A 1T
* A 1T
A 1T
A 1T
A 1T
INCH COMPONENT
No.
of
Teeth
P.D.
B
C
F
E
Bore Face
O.D. +.0010
Length Hub
Dia.
-.0000 Width
6-N482004
6-N483004
6-N483006
6-N484006
6-N484008
6-N485006
6-N485008
20
30
30
40
40
50
50
.417
.625
.625
.833
.833
1.042
1.042
.459
.667
.667
.875
.875
1.084
1.084
.1250
.1250
.1875
.1875
.2500
.1875
.2500
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/8
7/16
7/16
7/16
7/16
7/16
7/16
6-N322006
6-N322008
6-N323006
6-N323008
6-N324008
6-N324010
6-N325008
6-N325010
20
20
30
30
40
40
50
50
.625
.625
.938
.938
1.250
1.250
1.562
1.562
.687
.687
1.000
1.000
1.312
1.312
1.625
1.625
.1875
.2500
.1875
.2500
.2500
.3125
.2500
.3125
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
6-N242006
6-N242008
6-N243006
6-N243008
6-N244008
6-N244008S
6-N244010
6-N245008
6-N245010
20
20
30
30
40
40
40
50
50
.833
.833
1.250
1.250
1.667
1.667
1.667
2.083
2.083
.917
.917
1.333
1.333
1.750
1.750
1.750
2.167
2.167
.1875
.2500
.1875
.2500
.2500
.2500
.3125
.2500
.3125
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
Catalog Number
D
Hub
Proj.
G
Dia.
H
Dia.
11/32
7/16
7/16
1/2
1/2
1/2
1/2
3/16
1/4
1/4
1/4
1/4
1/4
1/4
7/16
7/16
7/16
7/16
1/2
1/2
1/2
1/2
1/2
1/2
5/8
5/8
5/8
5/8
5/8
5/8
1/4
1/4
1/4
1/4
5/16
5/16
5/16
5/16
31/32
31/32
1-19/64
1-19/64
5/8
5/8
5/8
5/8
1/32
1/32
1/32
1/32
9/16
9/16
9/16
9/16
9/16
9/16
9/16
9/16
9/16
5/8
5/8
5/8
5/8
3/4
3/4
3/4
3/4
3/4
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
15/16
15/16
1-23/64
1-23/64
1-23/64
1-25/32
1-25/32
3/8
7/16
3/4
3/4
3/4
3/4
3/4
1/16
1/16
1/16
1/16
1/16
1/16
1/16
9
10
11
12
13
14
15
1-222
REV: 07.18.12 mh
16
MOLDED WORM GEARS AND WORMS 48, 32 & 24 PITCH

RIGHT-HAND
DOUBLE THREAD
20 PRESSURE ANGLE
R
Inch
MATERIAL:

Worms - Nylon
SPECIFICATIONS:
These are in effect HELICAL gears with

a helix angle compatible with the worms.
When in mesh, they operate as a worm
pair at right angles. These gears will also
mesh with standard-stock steel or
brass worms.
G H
J (TYP)
* Tooling feature only, size may vary.
Worm Gear
F
5/32
O.D. P.D.
E
.19 * ACROSS FLATS, HEX (REF.)
Worm
WORM GEARS
INCH COMPONENT
Catalog Number
48 Pitch
A 1M
A 1M
A 1M
A 1M
32 Pitch
A 1M
A 1M
A 1M
A 1M
24 Pitch
A 1M
A 1M
A 1M
A 1M
6-Y48020
6-Y48030
6-Y48040
6-Y48050
No.
of
Teeth
P.D.
O.D.
B
Bore
Dia.
20
30
40
50
.417
.625
.833
1.042
.458
.667
.875
1.084
.187
.187
.187
.187
+.001
-.002
C
F
E
Face Length Hub
Dia.
Width
3/16
3/16
3/16
3/16
3/8
7/16
7/16
7/16
11/32
7/16
1/2
1/2
D
Hub
Proj.
G
Dia.
H
Dia.
3/16
1/4
1/4
1/4
5/8
5/8
1/32
3/64
6-Y32020
6-Y32030
6-Y32040
6-Y32050
20
30
40
50
.625
.938
1.250
1.562
.687
1.000
1.312
1.625
.187
.187
.250
.250
3/16
3/16
3/16
3/16
7/16
7/16
1/2
1/2
1/2
5/8
5/8
5/8
1/4
1/4
5/16
5/16
31/32
1-19/64
6-Y24020
6-Y24030
6-Y24040
6-Y24050
20
30
40
50
.833
1.250
1.667
2.083
.917
1.333
1.750
2.167
.187
.187
.312
.312
1/4
1/4
1/4
1/4
9/16
9/16
9/16
9/16
5/8
5/8
3/4
3/4
5/16
5/16
5/16
5/16
15/16 15/32
1-23/64 3/4
1-25/32 3/4
1/16
1/16
1/16
WORMS
Catalog Number
Pitch
P.D.
O.D.
B
Bore
Dia.
A 1M 5-Y48
A 1M 5-Y32
A 1M 5-Y24
48
32
24
.333
.438
.500
.375
.500
.583
.187
.187
.187
+.001
-.002
7
8
9
10
11
12
F
Face
Width
E
Length
C
Hub
Dia.
D
Hub
Proj.
9/16
41/64
11/16
3/4
53/64
15/16
.26
.32
.37
3/16
3/16
1/4
13
14
15
1-223
16
D810
D790
D787
D190
A 1T 6--X
P 2 of 2
2-8-89
REV: 07.16.12 mh
P1-224
P1-217
P1-206
P190
MOLDED WORM GEARS WITH INSERT 48, 32 & 24 PITCH

RIGHT-HAND
DOUBLE THREAD
20 PRESSURE ANGLE
R
Inch
MATERIAL:

Insert - Brass
T
1
SPECIFICATIONS:
These are, in effect, helical gears with a helix angle
compatible with their mating worms. When in mesh, the two
operate as a pair at right angles. These gears will also mesh
with standard-stock steel or brass worms.
Gears with:
D
2

.1250
#2-56
.1875
#4-40
.2500
#6-32
.3125
#8-32
SUB DRILL
SET SCREW
G H
5
J (TYP)
No.
of
Teeth
P.D.
O.D.
B
C
F
E
Bore Face
Length Hub
+.0010
Dia.
-.0000 Width
D
Hub
Proj.
G
Dia.
H
Dia.
6-Y482004
6-Y483004
6-Y483006
6-Y484006
6-Y484008
6-Y485006
6-Y485008
20
30
30
40
40
50
50
.417
.625
.625
.833
.833
1.042
1.042
.459
.667
.667
.875
.875
1.084
1.084
.1250
.1250
.1875
.1875
.2500
.1875
.2500
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/8
7/16
7/16
7/16
7/16
7/16
7/16
11/32
7/16
7/16
1/2
1/2
1/2
1/2
3/16
1/4
1/4
1/4
1/4
1/4
1/4
6-Y322006
6-Y322008
6-Y323006
6-Y323008
6-Y324008
6-Y324010
6-Y325008
6-Y325010
20
20
30
30
40
40
50
50
.625
.625
.938
.938
1.250
1.250
1.562
1.562
.687
.687
1.000
1.000
1.312
1.312
1.625
1.625
.1875
.2500
.1875
.2500
.2500
.3125
.2500
.3125
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
7/16
7/16
7/16
7/16
1/2
1/2
1/2
1/2
1/2
1/2
5/8
5/8
5/8
5/8
5/8
5/8
1/4
1/4
1/4
1/4
5/16
5/16
5/16
5/16
31/32
31/32
1-19/64
1-19/64
5/8
5/8
5/8
5/8
1/32
1/32
1/32
1/32
6-Y242006
6-Y242008
6-Y243006
6-Y243008
6-Y244008
6-Y244010
6-Y245008
6-Y245010
20
20
30
30
40
40
50
50
.833
.833
1.250
1.250
1.667
1.667
2.083
2.083
.917
.917
1.333
1.333
1.750
1.750
2.167
2.167
.1875
.2500
.1875
.2500
.2500
.3125
.2500
.3125
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
9/16
9/16
9/16
9/16
9/16
9/16
9/16
9/16
5/8
5/8
5/8
5/8
3/4
3/4
3/4
3/4
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
15/16
15/16
1-23/64
1-23/64
1-25/32
1-25/32
3/8
7/16
3/4
3/4
3/4
3/4
1/16
1/16
1/16
1/16
1/16
1/16
Catalog Number
48 Pitch
A 1T
A 1T
A 1T
A 1T
A 1T
A 1T
A 1T
32 Pitch
A 1T
A 1T
A 1T
A 1T
A 1T
A 1T
A 1T
A 1T
24 Pitch
A 1T
A 1T
A 1T
A 1T
A 1T
A 1T
A 1T
A 1T
INCH COMPONENT
9
10
11
12
13
14
15
1-224
REV: 07.18.12 mh
16
PRECISION GEAR & DIAL HUBS FAIRLOC TYPE

MATERIAL:
303 Stainless Steel

Hubs assembled to gears or
dials, and passivation.
Inch
1
Precision
Component

shaft tolerances. Suggested clearance
fit between the bore and the shaft is .0001/.0008.
T
1
#2-56 SOCKET HEAD

CAP SCREW SUPPLIED
3
HUB .550
O.D.
*.3750 +.0003
-.0000
4
5
+.0005
*B -.0000
L
*Diameters Concentric within .0003 T.I.R
INCH COMPONENT
Catalog Number
B
Bore
Hub
O.D.
Cap Screw
Clearance
Radius
S2F06Y-062090
S2F06Y-125090
S2F06Y-062094
S2F06Y-125094
S2F06Y-062120
S2F06Y-125120
S2F06Y-062125
S2F06Y-125125
S2F06Y-062187
S2F06Y-125187
S2F06Y-187187
S2F06Y-062241
S2F06Y-125241
S2F06Y-187241
S2F06Y-062250
S2F06Y-125250
S2F06Y-187250
.062
.125
.062
.125
.062
.125
.062
.125
.062
.125
.187
.062
.125
.187
.062
.125
.187
.0900
.0900
.0937
.0937
.1200
.1200
.1248
.1248
.1873
.1873
.1873
.2405
.2405
.2405
.2498
.2498
.2498
.265
.265
.265
.265
.265
.265
.265
.265
.265
.265
.265
.295
.295
.295
.295
.295
.295
.437
.437
.437
.437
.437
.437
.437
.437
.437
.437
.437
.530
.530
.530
.530
.530
.530
.273
.273
.273
.273
.273
.273
.273
.273
.273
.273
.273
.304
.304
.304
.304
.304
.304
7
8
9
10
11
12
13
14
15
1-225
16
PRECISION GEAR & DIAL HUBS PIN TYPE

MATERIAL:
R
T
303 Stainless Steel

Inch
1
Precision
Component
1
2
*.3750 +.0003
-.0000
L/2
SUB DRILL
*B +.0005
-.0000
SET
SCREW
SUPPLIED
DUTCH PIN
OR STAKE
CHAMFER
1/32 X 45
O.D.
*Diameters Concentric within .0003 T.I.R.
7
INCH COMPONENT
8
9
10
11
12
13
Catalog Number
B
Bore
O.D.
Set
Screw
S2006Y-125078
S2006Y-125090
S2006Y-062094
S2006Y-125094
S2006Y-062120
S2006Y-125120
S2006Y-062125
S2006Y-125125
S2006Y-062156
S2006Y-125156
S2006Y-062187
S2006Y-125187
S2006Y-062241
S2006Y-125241
S2006Y-062250
S2006Y-125250
.125
.125
.062
.125
.062
.125
.062
.125
.062
.125
.062
.125
.062
.125
.062
.125
.0781
.0900
.0937
.0937
.1200
.1200
.1248
.1248
.1562
.1562
.1873
.1873
.2405
.2405
.2498
.2498
.22
.22
.22
.22
.22
.22
.22
.22
.22
.22
.22
.22
.25
.25
.25
.25
7/16
7/16
7/16
7/16
7/16
7/16
7/16
7/16
7/16
7/16
7/16
7/16
1/2
1/2
1/2
1/2
#2-56
#2-56
#2-56
#2-56
#2-56
#2-56
#2-56
#2-56
#2-56
#2-56
#4-40
#4-40
#6-32
#6-32
#6-32
#6-32
14
15
16
1-226
PRECISION CLUSTER GEAR HUBS

MATERIAL:
303 Stainless Steel
Use with S1268Z...series of hubless gears.
Inch
1
Precision
Component
SUB DRILL
SOCKET HEAD SET SCREW SUPPLIED
+.0003
1
2
+.0005
*.3750 -.0000
B -.0000 O.D.
3
Fig. 1
.125
.25
.125
SUB DRILL
6
+.0005
B -.0000
+.0003
*.3750 -.0000
O.D.
SOCKET HEAD SET

SCREW SUPPLIED
.250
.22
Fig. 2
*.3750 Diameters Concentric to bore within .0003 T.I.R.
10
INCH COMPONENT
Catalog Number
B
Bore
O.D.
Set
Screw
11
S2706Y-125078CL
S2706Y-125120CL
S2706Y-125125CL
S2706Y-125156CL
S2706Y-125187CL
S2706Y-125250CL
.0781
.1200
.1248
.1562
.1873
.2498
7/16
7/16
7/16
7/16
7/16
1/2
#2-56
#2-56
#2-56
#2-56
#4-40
#6-32
12
S2706Y-250078CL
S2706Y-250120CL
S2706Y-250125CL
S2706Y-250156CL
S2706Y-250187CL
S2706Y-250250CL
.0781
.1200
.1248
.1562
.1873
.2498
7/16
7/16
7/16
7/16
7/16
1/2
#2-56
#2-56
#2-56
#2-56
#4-40
#6-32
Fig. 1
Fig. 2
1-227
13
14
15
16
PIN TYPE GEAR HUB

MATERIAL:
2024-T4 Aluminum Alloy
FINISH:
T
1
2
Inch
Clear Anodized
SPECIFICATIONS:
For Gears with 1/32 face width, use hub with .062 A dim.
These hubs can be used with stamped or molded hubless
gears or disc and drum dials.
3
4
#4-40
SET SCREW
.38
A
.005 R MAX.
5
.56 B
.376
.375
6
1/8
7
8
9
10
11
12
13
INCH COMPONENT
Catalog Number
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
1A16-25612
1A16-35612
1A16-45612
1A16-35615
1A16-45615
1A16-25618
1A16-35618
1A16-45618
1A16-25621
1A16-45621
1A16-25625
1A16-35625
1A16-45625
1A16-25628
1A16-35628
1A16-45628
14
15
16
SUB DRILL
1-228
.010
.062
.093
.125
.093
.125
.062
.093
.125
.062
.125
.062
.093
.125
.062
.093
.125
B
Bore Dia.
+.001
-.000
.125
.125
.125
.156
.156
.187
.187
.187
.218
.218
.250
.250
.250
.281
.281
.281
PRECISION GEAR & DIAL HUBS REMOVABLE TYPE

MATERIAL:
303 Stainless Steel

Inch
1
Precision
Component
SET SCREW
Fig. 1
Pin Type
Hub
NUT SUPPLIED
*.3746 +.0000
-.0003
5/8 O.D.
*C +.000
-.003
Fig. 2
Clamp Type
Hub
LOCK WASHER
*B +.0005
-.0000
1/32 x 45
CHAMFER
LOCK WASHER
*B +.0005
-.0000
NUT SUPPLIED
*.3746 +.0000
-.0003
5/8 O.D.
A
.031
.250 +.000
-.003
*Diameters Concentric within .0003 T.I.R
INCH COMPONENT
Catalog Number
Fig. 1 Pin Type
S20R6Y-062120
S20R6Y-125120
S20R6Y-062125
S20R6Y-125125
S20R6Y-062187
S20R6Y-125187
S20R6Y-062250
S20R6Y-125250
Catalog Number
Fig. 2 Clamp Type
S21R6Y-062120
S21R6Y-125120
S21R6Y-062125
S21R6Y-125125
S21R6Y-062187
S21R6Y-125187
S21R6Y-062250
S21R6Y-125250
B
Bore
O.D.
Set
Screw
.062
.125
.062
.125
.062
.125
.062
.125
.1200
.1200
.1248
.1248
.1873
.1873
.2498
.2498
.22
.22
.22
.22
.22
.22
.25
.25
.53
.60
.53
.60
.53
.60
.53
.60
7/16
7/16
7/16
7/16
7/16
7/16
1/2
1/2
#2-56
#2-56
#2-56
#2-56
#4-40
#4-40
#6-32
#6-32
9
10
11
12
B
Bore
C
Dia.
O.D.
.062
.125
.062
.125
.062
.125
.062
.125
.1200
.1200
.1248
.1248
.1873
.1873
.2498
.2498
.188
.188
.188
.188
.250
.250
.312
.312
.53
.60
.53
.60
.53
.60
.53
.60
7/16
7/16
7/16
7/16
7/16
7/16
1/2
1/2
1-229
13
14
15
16
PRECISION GEAR & DIAL HUBS CLAMP TYPE

MATERIAL:
R
T
303 Stainless Steel

Inch
1
Precision
Component
1
2
3
A
DUTCH PIN
or STAKE
.031 FOR CLAMPS

SEE INDEX
D
*B +.0005
-.0000
9
10
11
12
+.0003
.250
*Diameters Concentric
within .0003 T.I.R.
INCH COMPONENT
Catalog Number
B
Bore
C
Dia.
D
Dia.
S2106Y-062120
S2106Y-125120
S2106Y-062125
S2106Y-125125
S2106Y-062156
S2106Y-125156
S2106Y-062187
S2106Y-125187
S2106Y-062241
S2106Y-125241
S2106Y-062250
S2106Y-125250
.062
.125
.062
.125
.062
.125
.062
.125
.062
.125
.062
.125
.1200
.1200
.1248
.1248
.1562
.1562
.1873
.1873
.2405
.2405
.2498
.2498
.188
.188
.188
.188
.250
.250
.250
.250
.312
.312
.312
.312
7/16
7/16
7/16
7/16
7/16
7/16
7/16
7/16
1/2
1/2
1/2
1/2
13
14
15
16
+.000
C -.003
*.3750 -.0000
7
8
1/32
SAW SLOT
1-230
ALUMINUM-ACETAL GEAR BLANKS

.125 FACE
.3750 BORE
R
Inch
MATERIAL:
Core - Aluminum 2024-T3 Chemical Filmed

Rim - Acetal
1
Precision
Component
T
1
2
3
.125 .002
B
(8 PLACES)
5
C
O.D.
AS MOLDED
.3750 +.0000
-.0002
6
7
INCH COMPONENT
Catalog Number
S1268Y-SCB-01P
S1268Y-SCB-02P
S1268Y-SCB-03P
S1268Y-SCB-04P
S1268Y-SCB-05P
S1268Y-SCB-06P
S1268Y-SCB-07P
S1268Y-SCB-08P
S1268Y-SCB-09P
S1268Y-SCB-10P
S1268Y-SCB-11P
S1268Y-SCB-13P
8
O.D.
1/64
A
Dia.
B
Dia.
C
Dia.
1-1/8
1-3/8
1-5/8
1-7/8
2-1/8
2-3/8
2-5/8
2-7/8
3-1/8
3-3/8
3-5/8
4-1/8
5/8
7/8
1-1/8
1-3/8
1-5/8
1-7/8
2-1/8
2-3/8
2-5/8
2-7/8
3-1/8
3-5/8
7/32
5/16
3/8
3/8
3/8
3/8
3/8
3/8
13/16
1-3/32
1-3/8
1-3/8
1-3/4
1-3/4
1-3/4
1-3/4
9
10
11
12
13
14
15
1-231
16
BLANKS
FOR GEARS, PULLEYS AND FRICTION DRIVES
R
T
MATERIAL:
Inch
Blank - Acetal
Insert - Brass
SPECIFICATIONS:
Blanks with:
1
2

.125
#2-56
.1875
#4-40
.250
#6-32
1/4
1/8
SUB DRILL
SET SCREW
3
4
O.D. A
Fig. 1
7
8
9
10
11
12
13
C O.D.
Fig. 2
INCH COMPONENT
Catalog Number
Fig. 1 With Insert
A 1T15-0804
A 1T15-0806
A 1T15-0808
A 1T15-0904
A 1T15-0906
A 1T15-0908
A 1T15-1004
A 1T15-1006
A 1T15-1008
A 1T15-1104
A 1T15-1106
A 1T15-1108
A 1T15-1304
A 1T15-1306
A 1T15-1308
A 1T15-1504
A 1T15-1506
A 1T15-1508
A 1T15-1804
A 1T15-1806
O.D.
B
Bore
+.001
-.000
C
Hub
Dia.
A
Dia.
O.D.
Catalog Number 0.1
.76
.76
.76
.885
.885
.885
1.01
1.01
1.01
1.135
1.135
1.135
1.26
1.26
1.26
1.515
1.515
1.515
1.765
1.765
.125
.1875
.250
.125
.1875
.250
.125
.1875
.250
.125
.1875
.250
.125
.1875
.250
.125
.1875
.250
.125
.1875
33/64
33/64
33/64
33/64
33/64
33/64
33/64
33/64
33/64
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
3/4
3/4
1
1
1
1-1/8
1-1/8
Fig. 1 With Insert

3/4
1.765 .250
A 1T15-1808
.125
3/4
2.14
A 1T15-2104
.1875
3/4
2.14
A 1T15-2106
.250
3/4
2.14
A 1T15-2108
.125
3/4
2.39
A 1T15-2404
.1875
3/4
2.39
A 1T15-2406
.250
3/4
2.39
A 1T15-2408
3/4
2.765 .125
A 1T15-2804
3/4
2.765 .1875
A 1T15-2806
3/4
2.765 .250
A 1T15-2808
Fig. 2 Without Insert, +.0000 / -.0015 Bore
.3740 33/64
.76
A 1M15-08
.885 .3740 33/64
A 1M15-09
.3740 33/64
1.01
A 1M15-10
5/8
1.135 .4370
A 1M15-11
.4370
5/8
1.26
A 1M15-13
5/8
1.515 .4370
A 1M15-15
3/4
1.765 .4370
A 1M15-18
.4370
3/4
2.14
A 1M15-21
.4370
3/4
2.39
A 1M15-24
3/4
2.765 .4370
A 1M15-28
0.1
B
Bore
+.001
-.000
C
Hub
Dia.
A
Dia.
1-1/8
1-3/8
1-3/8
1-3/8
1-13/16
1-13/16
1-13/16
2
2
2
1
1-1/8
1-3/8
1-13/16
2
14
15
16
1/4
1/8
B
5
6
3/8
3/8
1/8
1-232
BLANKS
FOR GEARS, PULLEYS AND FRICTION DRIVES
MATERIAL:
Inch
Blank - Acetal
Insert - Brass
SPECIFICATIONS:
Blanks with:

.125
#2-56
.1875
#4-40
.250
#6-32
.3125
#8-32
1/2
1/4
SUB DRILL
SET SCREW
O.D.
1/2
C O.D.
1/4 MOLDED BORE

Fig. 1
FIG. 1 WITH INSERT
O.D. 1-1/4 +.00/-.02

A 1T15-21204
A 1T15-21206
A 1T15-21208
A 1T15-31204
A 1T15-31206
A 1T15-31208
A 1T15-41206
A 1T15-41208
A 1T15-41210
O.D. 1-3/4 +.00/-.02
A 1T15-21704
A 1T15-21706
A 1T15-21708
A 1T15-31704
A 1T15-31706
A 1T15-31708
A 1T15-41706
A 1T15-41708
A 1T15-41710
O.D. 2-3/4 +.00/-.02
A 1T15-22704
A 1T15-22706
A 1T15-22708
A 1T15-32704
A 1T15-32706
A 1T15-32708
A 1T15-42706
A 1T15-42708
A 1T15-42710
FIG. 2 WITHOUT INSERT
INCH COMPONENT
Catalog Number
Fig. 2
B
F
C
E
Bore Face
Hub
Length
+.001
Dia.
-.000 Width
F
C
E
Catalog Number O.D. Face
Hub
Length
Width
Dia.
.125
.1875
.250
.125
.1875
.250
.1875
.250
.3125
1/8
1/8
1/8
3/16
3/16
3/16
1/4
1/4
1/4
5/8
5/8
5/8
11/16
11/16
11/16
3/4
3/4
3/4
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
1/4 Bore
A 1M15-212
A 1M15-312
A 1M15-412
A 1M15-217
A 1M15-317
A 1M15-417
A 1M15-227
A 1M15-327
A 1M15-427
.125
.1875
.250
.125
.1875
.250
.1875
.250
.3125
1/8
1/8
1/8
3/16
3/16
3/16
1/4
1/4
1/4
5/8
5/8
5/8
11/16
11/16
11/16
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
.125
.1875
.250
.125
.1875
.250
.1875
.250
.3125
1/8
1/8
1/8
3/16
3/16
3/16
1/4
1/4
1/4
5/8
5/8
5/8
11/16
11/16
11/16
3/4
3/4
3/4
1
1
1
1
1
1
1
1
1
1-1/4
1-1/4
1-1/4
1-3/4
1-3/4
1-3/4
2-3/4
2-3/4
2-3/4
1/8
3/16
1/4
1/8
3/16
1/4
1/8
3/16
1/4
5/8
11/16
3/4
5/8
11/16
3/4
5/8
11/16
3/4
5/8
5/8
5/8
3/4
3/4
3/4
1
1
1
7
8
9
10
11
12
13
14
15
1-233
16
PRECISION BALANCED-TYPE GEAR CLAMPS

MATERIAL:
R
T
1
2
Carbon Steel, Zinc Plated

303 Stainless Steel
416 Stainless Steel (Rc 38-45)
416 Stainless Steel (Rc 38-45) Black Oxide
Inch
SPECIFICATIONS:
Precision
Component
Tolerances
Decimals
.005
Fractions
1/64
Stainless Steel Socket Head
Cap Screw Supplied
I.D.
5
R CLEARANCE RADIUS
6
7
INCH COMPONENT
Catalog Number
8
9
10
11
12
13
14

1/8
S3300Y-C098
3/16
S3300Y-C099
1/4
S3300Y-C100
5/16
S3300Y-C101
3/8
S3300Y-C102
1/8
S3300Y-C083
3/16
S3300Y-C084
1/4
S3300Y-C085
5/16
S3300Y-C086
3/8
S3300Y-C087
303 Stainless Steel
1/8
S3300Y-C088
3/16
S3300Y-C089
1/4
S3300Y-C090
5/16
S3300Y-C091
3/8
S3300Y-C092
1/8
S3300Y-C160
3/16
S3300Y-C161
1/4
S3300Y-C162
416 Stainless Steel (Rc 38-45), Black Oxide
1/8
S3300Y-C163
3/16
S3300Y-C164
1/4
S3300Y-C165
15
16
Shaft
Size
1-234
I.D.
+.001
-.000
Screw
Size
.188
.251
.313
.376
.438
.188
.251
.313
.376
.438
11/16
51/64
13/16
7/8
1-1/32
11/16
51/64
13/16
7/8
1-1/32
.140
.140
.140
.140
.140
.250
.250
.250
.250
.250
.312
.375
.437
.500
.625
.312
.375
.437
.500
.625
#2-56
#2-56
#2-56
#2-56
#2-56
#6-32
#6-32
#6-32
#6-32
#6-32
27/64
1/2
33/64
9/16
41/64
27/64
1/2
33/64
9/16
41/64
.188
.251
.313
.376
.438
11/16
51/64
13/16
7/8
1-1/32
.250
.250
.250
.250
.250
.312
.375
.437
.500
.625
#6-32
#6-32
#6-32
#6-32
#6-32
27/64
1/2
33/64
9/16
41/64
.188
.250
.312
11/16
13/16
13/16
.240
.240
.240
.312
.375
.437
#6-32
#6-32
#6-32
27/64
1/2
33/64
.188
.250
.312
11/16
13/16
13/16
.240
.240
.240
.312
.375
.437
#6-32
#6-32
#6-32
27/64
1/2
33/64
COMMERCIAL BALANCED-TYPE GEAR CLAMPS

MATERIAL:
Carbon Steel
303 Stainless Steel
416 Stainless Steel (Rc 38-45) Black Oxide
R
Inch
SPECIFICATIONS:
Tolerances
Decimals
.01
Fractions
1/32
T
1

Cap Screw Supplied
2
T
I.D.
4
H
5
R CLEARANCE RADIUS
INCH COMPONENT
Catalog Number
Shaft
Size
Carbon Steel
1/8
S3300Y-J098
3/16
S3300Y-J099
1/4
S3300Y-J100
5/16
S3300Y-J101
3/8
S3300Y-J102
1/8
S3300Y-J083
3/16
S3300Y-J084
1/4
S3300Y-J085
5/16
S3300Y-J086
3/8
S3300Y-J087
303 Stainless Steel
1/8
S3300Y-J088
3/16
S3300Y-J089
1/4
S3300Y-J090
5/16
S3300Y-J091
3/8
S3300Y-J092
1/8
S3300Y-J160
3/16
S3300Y-J161
1/4
S3300Y-J162
416 Stainless Steel (Rc 38-45), Black Oxide
1/8
S3300Y-J163
3/16
S3300Y-J164
1/4
S3300Y-J165
I.D.
+.002
-.000
Screw
Size
.188
.251
.313
.376
.438
.188
.251
.313
.376
.438
11/16
51/64
13/16
7/8
1-1/32
11/16
51/64
13/16
7/8
1-1/32
.140
.140
.140
.140
.140
.250
.250
.250
.250
.250
.312
.375
.437
.500
.625
.312
.375
.437
.500
.625
#2-56
#2-56
#2-56
#2-56
#2-56
#6-32
#6-32
#6-32
#6-32
#6-32
27/64
1/2
33/64
9/16
41/64
27/64
1/2
33/64
9/16
41/64
.188
.251
.313
.376
.438
11/16
51/64
13/16
7/8
1-1/32
.250
.250
.250
.250
.250
.312
.375
.437
.500
.625
#6-32
#6-32
#6-32
#6-32
#6-32
27/64
1/2
33/64
9/16
41/64
.188
.250
.312
11/16
13/16
13/16
.240
.240
.240
.312
.375
.437
#6-32
#6-32
#6-32
27/64
1/2
33/64
13
.188
.250
.312
11/16
13/16
13/16
.240
.240
.240
.312
.375
.437
#6-32
#6-32
#6-32
27/64
1/2
33/64
14
8
9
10
11
12
15
1-235
16
PRECISION BALANCED-TYPE GEAR CLAMPS

REDUCED CLEARANCE RADIUS
R
T
1
2
MATERIAL:
Inch

303 Stainless Steel
1
Precision
Component
SPECIFICATIONS:
Tolerances
Decimals
.005
Fractions
1/64
Cap Screw Supplied
W
3
I.D.
5
6
7
8
9
10
11
12
R CLEARANCE RADIUS
INCH COMPONENT
Catalog Number
S3301Y-C103
S3301Y-C104
S3301Y-C105
S3301Y-C106
S3301Y-C107
S3301Y-C093
S3301Y-C094
S3301Y-C095
S3301Y-C096
S3301Y-C097
303 Stainless Steel
S3301Y-C093S
S3301Y-C094S
S3301Y-C095S
S3301Y-C096S
S3301Y-C097S
13
14
15
16
1-236
I.D.
Shaft
Size
+.001
-.000
Screw
Size
1/8
3/16
1/4
5/16
3/8
1/8
3/16
1/4
5/16
3/8
.188
.251
.313
.376
.438
.188
.251
.313
.376
.438
11/16
51/64
13/16
7/8
1-1/32
11/16
51/64
13/16
7/8
1-1/32
.140
.140
.140
.140
.140
.250
.250
.250
.250
.250
.312
.375
.437
.500
.625
.312
.375
.437
.500
.625
#2-56
#2-56
#2-56
#2-56
#2-56
#6-32
#6-32
#6-32
#6-32
#6-32
25/64
15/32
31/64
17/32
39/64
25/64
15/32
31/64
17/32
39/64
1/8
3/16
1/4
5/16
3/8
.188
.251
.313
.376
.438
11/16
51/64
13/16
7/8
1-1/32
.250
.250
.250
.250
.250
.312
.375
.437
.500
.625
#6-32
#6-32
#6-32
#6-32
#6-32
25/64
15/32
31/64
17/32
39/64
COMMERCIAL BALANCED-TYPE GEAR CLAMPS

MATERIAL:
Inch
Carbon Steel
303 Stainless Steel
SPECIFICATIONS:
Tolerances
Decimals
.01
Fractions
1/32
T
1

Cap Screw Supplied
2
W
3
I.D.
5
R CLEARANCE RADIUS
INCH COMPONENT
Catalog Number
Carbon Steel
S3301Y-J103
S3301Y-J104
S3301Y-J105
S3301Y-J106
S3301Y-J107
S3301Y-J093
S3301Y-J094
S3301Y-J095
S3301Y-J096
S3301Y-J097
303 Stainless Steel
S3301Y-J093S
S3301Y-J094S
S3301Y-J095S
S3301Y-J096S
S3301Y-J097S
I.D.
Shaft
Size
+.002
-.000
Screw
Size
1/8
3/16
1/4
5/16
3/8
1/8
3/16
1/4
5/16
3/8
.188
.251
.313
.376
.438
.188
.251
.313
.376
.438
11/16
51/64
13/16
7/8
1-1/32
11/16
51/64
13/16
7/8
1-1/32
.140
.140
.140
.140
.140
.250
.250
.250
.250
.250
.312
.375
.437
.500
.625
.312
.375
.437
.500
.625
#2-56
#2-56
#2-56
#2-56
#2-56
#6-32
#6-32
#6-32
#6-32
#6-32
25/64
15/32
31/64
17/32
39/64
25/64
15/32
31/64
17/32
39/64
1/8
3/16
1/4
5/16
3/8
.188
.251
.313
.376
.438
11/16
51/64
13/16
7/8
1-1/32
.250
.250
.250
.250
.250
.312
.375
.437
.500
.625
#6-32
#6-32
#6-32
#6-32
#6-32
25/64
15/32
31/64
17/32
39/64
7
8
9
10
11
12
13
14
15
1-237
16
PRECISION SPLIT-HUB GEAR CLAMPS

MATERIAL:
R
T
1
2

303 Stainless Steel
Inch
SPECIFICATIONS:
1
Precision
Component
Tolerances
Decimals
.005
Fractions
1/64
Cap Screw Supplied
T
W
I.D.
4
R CLEARANCE RADIUS
5
INCH COMPONENT
6
7
8
9
10
11
12
13
14
Catalog Number
S3700Y-C113
S3700Y-C114
S3700Y-C115
S3700Y-C116
S3700Y-C117
303 Stainless Steel
S3700Y-C113S
S3700Y-C114S
S3700Y-C115S
S3700Y-C116S
S3700Y-C117S
S3700Y-C143-2
S3700Y-C143-3
S3700Y-C143-4
S3700Y-C143-5
S3700Y-C143-6
303 Stainless Steel
S3700Y-C143-2S
S3700Y-C143-3S
S3700Y-C143-4S
S3700Y-C143-5S
S3700Y-C143-6S
S3700Y-C143-2X
S3700Y-C143-3X
S3700Y-C143-4X
S3700Y-C143-5X
S3700Y-C143-6X
15
16
1-238
I.D.
Shaft
Size
+.001
-.000
Screw
Size
1/8
3/16
1/4
5/16
3/8
.188
.251
.313
.376
.438
15/32
1/2
19/32
21/32
25/32
.140
.140
.140
.140
.140
.312
.375
.437
.500
.625
#2-56
#2-56
#2-56
#2-56
#2-56
11/32
25/64
7/16
15/32
9/16
1/8
3/16
1/4
5/16
3/8
.188
.251
.313
.376
.438
15/32
1/2
19/32
21/32
25/32
.140
.140
.140
.140
.140
.312
.375
.437
.500
.625
#2-56
#2-56
#2-56
#2-56
#2-56
11/32
25/64
7/16
15/32
9/16
1/8
3/16
1/4
5/16
3/8
.188
.251
.313
.376
.438
15/32
9/16
19/32
21/32
25/32
.250
.250
.250
.250
.250
.312
.375
.437
.500
.625
#6-32
#6-32
#6-32
#6-32
#6-32
27/64
31/64
1/2
9/16
41/64
1/8
3/16
1/4
5/16
3/8
.188
.251
.313
.376
.438
15/32
9/16
19/32
21/32
25/32
.250
.250
.250
.250
.250
.312
.375
.437
.500
.625
#6-32
#6-32
#6-32
#6-32
#6-32
27/64
31/64
1/2
9/16
41/64
1/8
3/16
1/4
5/16
3/8
.188
.251
.313
.376
.438
15/32
9/16
19/32
21/32
25/32
.250
.250
.250
.250
.250
.312
.375
.437
.500
.625
#6-32
#6-32
#6-32
#6-32
#6-32
27/64
31/64
1/2
9/16
41/64
COMMERCIAL SPLIT-HUB GEAR CLAMPS

MATERIAL:

303 Stainless Steel
R
Inch
SPECIFICATIONS:
Tolerances
Decimals
.01
Fractions
1/32
T
1

Cap Screw Supplied
T
W
I.D.
3
H
4
R CLEARANCE RADIUS
INCH COMPONENT
Catalog Number
S3700Y-J113
S3700Y-J114
S3700Y-J115
S3700Y-J116
S3700Y-J117
303 Stainless Steel
S3700Y-J113S
S3700Y-J114S
S3700Y-J115S
S3700Y-J116S
S3700Y-J117S
S3700Y-J143-2
S3700Y-J143-3
S3700Y-J143-4
S3700Y-J143-5
S3700Y-J143-6
303 Stainless Steel
S3700Y-J143-2S
S3700Y-J143-3S
S3700Y-J143-4S
S3700Y-J143-5S
S3700Y-J143-6S
S3700Y-J143-2X
S3700Y-J143-3X
S3700Y-J143-4X
S3700Y-J143-5X
S3700Y-J143-6X
I.D.
Shaft
Size
+.002
-.000
Screw
Size
1/8
3/16
1/4
5/16
3/8
.188
.251
.313
.376
.438
15/32
1/2
19/32
21/32
25/32
.140
.140
.140
.140
.140
.312
.375
.437
.500
.625
#2-56
#2-56
#2-56
#2-56
#2-56
11/32
25/64
7/16
15/32
9/16
1/8
3/16
1/4
5/16
3/8
.188
.251
.313
.376
.438
15/32
1/2
19/32
21/32
25/32
.140
.140
.140
.140
.140
.312
.375
.437
.500
.625
#2-56
#2-56
#2-56
#2-56
#2-56
11/32
25/64
7/16
15/32
9/16
1/8
3/16
1/4
5/16
3/8
.188
.251
.313
.376
.438
15/32
9/16
19/32
21/32
25/32
.250
.250
.250
.250
.250
.312
.375
.437
.500
.625
#6-32
#6-32
#6-32
#6-32
#6-32
27/64
31/64
1/2
9/16
41/64
1/8
3/16
1/4
5/16
3/8
.188
.251
.313
.376
.438
15/32
9/16
19/32
21/32
25/32
.250
.250
.250
.250
.250
.312
.375
.437
.500
.625
#6-32
#6-32
#6-32
#6-32
#6-32
27/64
31/64
1/2
9/16
41/64
1/8
3/16
1/4
5/16
3/8
.188
.251
.313
.376
.438
15/32
9/16
19/32
21/32
25/32
.250
.250
.250
.250
.250
.312
.375
.437
.500
.625
#6-32
#6-32
#6-32
#6-32
#6-32
27/64
31/64
1/2
9/16
41/64
6
7
8
9
10
11
12
13
14
15
1-239
16

R
T
MATERIAL:
Inch

303 Stainless Steel
1
Precision
Component
SPECIFICATIONS:
1
2
Tolerances
Decimals
.005
Fractions
1/64
Cap Screw Supplied
T
W
I.D.
3
H
4
R CLEARANCE RADIUS
1/16
INCH COMPONENT
6
7
8
9
10
11
12
13
14
Catalog Number
S3701Y-C118
S3701Y-C119
S3701Y-C120
S3701Y-C121
S3701Y-C122
303 Stainless Steel
S3701Y-C118S
S3701Y-C119S
S3701Y-C120S
S3701Y-C121S
S3701Y-C122S
S3701Y-C108
S3701Y-C109
S3701Y-C110
S3701Y-C111
S3701Y-C112
303 Stainless Steel
S3701Y-C108S
S3701Y-C109S
S3701Y-C110S
S3701Y-C111S
S3701Y-C112S
S3701Y-C108X
S3701Y-C109X
S3701Y-C110X
S3701Y-C111X
S3701Y-C112X
15
16
1-240
I.D.
Shaft
Size
+.001
-.000
Screw
Size
1/8
3/16
1/4
5/16
3/8
.188
.251
.313
.376
.438
15/32
1/2
19/32
21/32
25/32
.140
.140
.140
.140
.140
.312
.375
.437
.500
.625
#2-56
#2-56
#2-56
#2-56
#2-56
5/16
23/64
25/64
7/16
33/64
1/8
3/16
1/4
5/16
3/8
.188
.251
.313
.376
.438
15/32
1/2
19/32
21/32
25/32
.140
.140
.140
.140
.140
.312
.375
.437
.500
.625
#2-56
#2-56
#2-56
#2-56
#2-56
5/16
23/64
25/64
7/16
33/64
1/8
3/16
1/4
5/16
3/8
.188
.251
.313
.376
.438
15/32
9/16
19/32
21/32
25/32
.250
.250
.250
.250
.250
.312
.375
.437
.500
.625
#6-32
#6-32
#6-32
#6-32
#6-32
3/8
29/64
15/32
33/64
19/32
1/8
3/16
1/4
5/16
3/8
.188
.251
.313
.376
.438
15/32
9/16
19/32
21/32
25/32
.250
.250
.250
.250
.250
.312
.375
.437
.500
.625
#6-32
#6-32
#6-32
#6-32
#6-32
3/8
29/64
15/32
33/64
19/32
1/8
3/16
1/4
5/16
3/8
.188
.251
.313
.376
.438
15/32
9/16
19/32
21/32
25/32
.250
.250
.250
.250
.250
.312
.375
.437
.500
.625
#6-32
#6-32
#6-32
#6-32
#6-32
3/8
29/64
15/32
33/64
19/32

MATERIAL:
Inch
Carbon Steel
303 Stainless Steel
SPECIFICATIONS:
Tolerances
Decimals
.01
Fractions
1/32

Cap Screw Supplied
T
W
I.D.
3
H
4
R CLEARANCE RADIUS
1/16
INCH COMPONENT
Catalog Number
Carbon Steel
S3701Y-J118
S3701Y-J119
S3701Y-J120
S3701Y-J121
S3701Y-J122
303 Stainless Steel
S3701Y-J118S
S3701Y-J119S
S3701Y-J120S
S3701Y-J121S
S3701Y-J122S
Carbon Steel
S3701Y-J108
S3701Y-J109
S3701Y-J110
S3701Y-J111
S3701Y-J112
303 Stainless Steel
S3701Y-J108S
S3701Y-J109S
S3701Y-J110S
S3701Y-J111S
S3701Y-J112S
S3701Y-J108X
S3701Y-J109X
S3701Y-J110X
S3701Y-J111X
S3701Y-J112X
I.D.
Shaft
Size
+.002
-.000
Screw
Size
1/8
3/16
1/4
5/16
3/8
.188
.251
.313
.376
.438
15/32
1/2
19/32
21/32
25/32
.140
.140
.140
.140
.140
.312
.375
.437
.500
.625
#2-56
#2-56
#2-56
#2-56
#2-56
5/16
23/64
25/64
7/16
33/64
1/8
3/16
1/4
5/16
3/8
.188
.251
.313
.376
.438
15/32
1/2
19/32
21/32
25/32
.140
.140
.140
.140
.140
.312
.375
.437
.500
.625
#2-56
#2-56
#2-56
#2-56
#2-56
5/16
23/64
25/64
7/16
33/64
1/8
3/16
1/4
5/16
3/8
.188
.251
.313
.376
.438
15/32
9/16
19/32
21/32
25/32
.250
.250
.250
.250
.250
.312
.375
.437
.500
.625
#6-32
#6-32
#6-32
#6-32
#6-32
3/8
29/64
15/32
33/64
19/32
1/8
3/16
1/4
5/16
3/8
.188
.251
.313
.376
.438
15/32
9/16
19/32
21/32
25/32
.250
.250
.250
.250
.250
.312
.375
.437
.500
.625
#6-32
#6-32
#6-32
#6-32
#6-32
3/8
29/64
15/32
33/64
19/32
1/8
3/16
1/4
5/16
3/8
.188
.251
.313
.376
.438
15/32
9/16
19/32
21/32
25/32
.250
.250
.250
.250
.250
.312
.375
.437
.500
.625
#6-32
#6-32
#6-32
#6-32
#6-32
3/8
29/64
15/32
33/64
19/32
6
7
8
9
10
11
12
13
14
15
1-241
16

MATERIAL:
303 Stainless Steel
SPECIFICATIONS:
T
1
Inch
Tolerances
Decimals
.005
Fractions
1/64
1
Precision
Component

Cap Screw Supplied
2
I.D.
.13
INCH COMPONENT
5
6
I.D.
Catalog Number
303 Stainless Steel
S3503Y-C058
S3503Y-C059
S3503Y-C060
+.001
-.000
.008
B
Dia.
Screw
Size
Clearance
Radius
.125
.187
.250
.305
.370
.435
.190
.250
.310
#2-56
#2-56
#2-56
9/32
5/16
11/32
7
8
9
10
MATERIAL:
303 Stainless Steel

2024-T351 Aluminum, Anodized
SPECIFICATIONS:
Tolerances
Decimals
.005
Fractions
1/64
B

Cap Screw Supplied
11
12
13
14
15
16
I.D.
INCH COMPONENT
Catalog Number
2024-T351
303 Stainless Steel Aluminum
Anodized
S3501Y-C062
S3501Y-C063
S3501Y-C064
S3501Y-C068
S3501Y-C069
S3501Y-C070
S3501Y-C074
S3501Y-C075
S3501Y-C076
S3501Y-C075M
S3501Y-C076M
1-242
S3501Y-C065
S3501Y-C066
S3501Y-C067
S3501Y-C071
S3501Y-C072
S3501Y-C073
S3501Y-C077
S3501Y-C078
S3501Y-C079
S3501Y-C078M
S3501Y-C079M
Shaft
Size
+.001
-.000
I.D.
B
Dia.
Screw
Size
Clearance
Radius
.125
.187
.250
.093
.125
.187
.093
.125
.187
.125
.187
.188
.250
.313
.125
.188
.250
.125
.188
.250
.188
.250
7/8
7/8
7/8
5/8
5/8
5/8
9/16
9/16
9/16
9/16
9/16
.250
.250
.250
.156
.156
.156
.156
.156
.156
.125
.125
#6-32
#6-32
#6-32
#2-56
#2-56
#2-56
#2-56
#2-56
#2-56
#1-72
#1-72
33/64
33/64
33/64
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8

MATERIAL:
303 Stainless Steel
SPECIFICATIONS:
Inch
Tolerances
Decimals
.01
Fractions
1/32
I.D.

Cap Screw Supplied
.13
INCH COMPONENT
I.D.
Catalog Number
303 Stainless Steel
S3503Y-J058
S3503Y-J059
S3503Y-J060
+.002
-.000
.016
B
Dia.
Screw
Size
Clearance
Radius
.125
.187
.250
.305
.370
.435
.190
.250
.310
#2-56
#2-56
#2-56
9/32
5/16
11/32
MATERIAL:
303 Stainless Steel

2024-T351 Aluminum
3
4
5
6
SPECIFICATIONS:
Tolerances
Decimals
.01
Fractions
1/32
7
8

Cap Screw Supplied
I.D.
I.D.
10
NOTE: Notched style will be discontinued
when stock is depleted. Either style may be

supplied at SI option.
11
INCH COMPONENT
Catalog Number
303 Stainless Steel
S3501Y-J062
S3501Y-J063
S3501Y-J064
S3501Y-J068
S3501Y-J069
S3501Y-J070
S3501Y-J074
S3501Y-J075
S3501Y-J076
S3501Y-J075M
S3501Y-J076M
2024-T351
Aluminum
S3501Y-J065
S3501Y-J066
S3501Y-J067
S3501Y-J071
S3501Y-J072
S3501Y-J073
S3501Y-J077
S3501Y-J078
S3501Y-J079
S3501Y-J078M
S3501Y-J079M
Shaft
Size
+.002
-.000
I.D.
B
Dia.
Screw
Size
Clearance
Radius
.125
.187
.250
.093
.125
.187
.093
.125
.187
.125
.187
.188
.250
.313
.125
.188
.250
.125
.188
.250
.188
.250
7/8
7/8
7/8
5/8
5/8
5/8
9/16
9/16
9/16
9/16
9/16
.250
.250
.250
.156
.156
.156
.156
.156
.156
.125
.125
#6-32
#6-32
#6-32
#2-56
#2-56
#2-56
#2-56
#2-56
#2-56
#1-72
#1-72
33/64
33/64
33/64
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
1-243
REV: 06.21.12 mh
12
13
14
15
16
PRECISION GEAR CLAMPS

MATERIAL:
Inch
Hardened 416 Stainless Steel
T
1
2
SPECIFICATIONS:
1
Precision
Component
Tolerances
Decimals
.005
Fractions
1/64
Cap Screw Supplied
.015 x 45
CHAMFER
(TYP)
SUB DRILL
.063 x .093 DEEP
3
I.D.
4
5
6
7
8
.16
INCH COMPONENT
Catalog Number
S3502Y-C152
S3502Y-C153
S3502Y-C154
S3502Y-C155
+.0005
-.0000
I.D.
B
Dia.
Screw
Size
Clearance
Radius
.1250
.1562
.1875
.2500
.500
.500
.500
.594
#2-56
#2-56
#2-56
#2-56
19/64
19/64
19/64
11/32
PRECISION SPLIT-HUB GEAR CLAMP, 1/8 SHAFT

MATERIAL:
303 Stainless Steel
SPECIFICATIONS:
10
Tolerances
Decimals
.005
Fractions
1/64
.120
.030
11

Cap Screw Supplied
12
I.D.
.500
13
14
15
16
30
.02 x 45 CHAMFER
INCH COMPONENT
Catalog Number
303 Stainless Steel
S3502Y-C057
1-244
+.001
-.000
I.D.
Screw
Size
Clearance
Radius
.1875
#1-72
19/64
COMMERCIAL GEAR CLAMPS

MATERIAL:
Inch
SPECIFICATIONS:
Tolerances
Decimals
.01
Fractions
1/32
T
1

Cap Screw Supplied
.015 x 45
CHAMFER
(TYP)
SUB DRILL
.063 x .093 DEEP
.16
I.D.
B
INCH COMPONENT
Catalog Number
S3502Y-J152
S3502Y-J153
S3502Y-J154
S3502Y-J155
+.001
-.000
I.D.
B
Dia.
Screw
Size
Clearance
Radius
.1250
.1562
.1875
.2500
.500
.500
.500
.594
#2-56
#2-56
#2-56
#2-56
19/64
19/64
19/64
11/32
6
7
8
COMMERCIAL SPLIT-HUB GEAR CLAMP, 1/8 SHAFT

MATERIAL:
303 Stainless Steel
SPECIFICATIONS:
Tolerances
Decimals
.01
Fractions
1/32
10
.120
.030
11

Cap Screw Supplied
12
I.D.
.500
30
.02 x 45 CHAMFER
INCH COMPONENT
Catalog Number
303 Stainless Steel
S3502Y-C057
+.002
-.000
I.D.
Screw
Size
Clearance
Radius
.1875
#1-72
19/64
1-245
13
14
15
16
I
R

PRECISION
REDUCED CLEARANCE GEAR CLAMPS
Inch
MATERIAL:
T
1
2
SPECIFICATIONS:
Tolerances
Decimals
.005
Cap Screw Supplied
I.D.
5
6
7
8
9
.15
3
4
1
Precision
Component
.02
INCH COMPONENT
Catalog Number
S3201Y-C046
S3201Y-C047
S3201Y-C048
S3201Y-C049
S3201Y-C050
S3201Y-C051
S3201Y-C052
S3201Y-C053
S3201Y-C054
I.D.
+.001
-.000
Screw
Size
Clearance
Radius
.1250
.1406
.1562
.1718
.1875
.2031
.2187
.2343
.2500
.290
.304
.320
.336
.352
.368
.382
.398
.414
.196
.210
.226
.242
.258
.274
.288
.304
.320
#2-56
#2-56
#2-56
#2-56
#2-56
#2-56
#2-56
#2-56
#2-56
.26
.27
.28
.29
.30
.31
.32
.33
.35

MATERIAL:
10
11
12
SPECIFICATIONS:
Tolerances
Decimals
.005
Fractions
1/64
.187
I.D.

Cap Screw Supplied
13
INCH COMPONENT
14
15
16
Catalog Number
S3200Y-C145
S3200Y-C146
1-246
I.D.
+.001
-.000
.187
.250
Screw
Size
Clearance
Radius
1/2
5/8
.312
.375
#4-40
#4-40
25/64
7/16

COMMERCIAL
REDUCED CLEARANCE GEAR CLAMPS
R
Inch
MATERIAL:
SPECIFICATIONS:
Tolerances
Decimals
.01

Cap Screw Supplied
I.D.
.15

S3201Y-J046
S3201Y-J047
S3201Y-J048
S3201Y-J049
S3201Y-J050
S3201Y-J051
S3201Y-J052
S3201Y-J053
S3201Y-J054
3
.02
INCH COMPONENT
Catalog Number
I.D.
+.002
-.000
Screw
Size
Clearance
Radius
.1250
.1406
.1562
.1718
.1875
.2031
.2187
.2343
.2500
.290
.304
.320
.336
.352
.368
.382
.398
.414
.196
.210
.226
.242
.258
.274
.288
.304
.320
#2-56
#2-56
#2-56
#2-56
#2-56
#2-56
#2-56
#2-56
#2-56
.26
.27
.28
.29
.30
.31
.32
.33
.35
5
6
7
8
9
MATERIAL:
10
SPECIFICATIONS:
Tolerances
Decimals
.01
Fractions
1/32
11
I.D.

Cap Screw Supplied
.187
12
A
13
INCH COMPONENT
Catalog Number
S3200Y-J145
S3200Y-J146
I.D.
+.002
-.000
Screw
Size
Clearance
Radius
14
.187
.250
1/2
5/8
.312
.375
#4-40
#4-40
25/64
7/16
15
1-247
16
I
R

PRECISION
TWO-PIECE BALANCED GEAR CLAMPS
Inch
MATERIAL:
303 Stainless Steel

SPECIFICATIONS:
1
2
1
Precision
Component
Tolerances
Decimals
.005
Fractions
1/64
C
Stainless Steel Slotted Fillister
Head Screws Supplied
A
I.D.
B
4
INCH COMPONENT
5
6
7
8
9
Catalog Number
Hardened 416
Stainless Steel
303 Stainless Steel
S3401Y-C147-2
S3401Y-C147-3
S3401Y-C147-4
S3401Y-C147-5
S3401Y-C147-6
S3401Y-C147-2S
S3401Y-C147-3S
S3401Y-C147-4S
S3401Y-C147-5S
S3401Y-C147-6S
I.D.
Shaft
Size
+.002
-.000
1/8
3/16
1/4
5/16
3/8
.187
.250
.312
.375
.437
.500
.590
.687
.781
.890
.286
.350
.420
.510
.636
.156
.187
.187
.187
.250
Screw Clearance
Size
Radius
#2-56
#3-48
#4-40
#4-40
#6-32
9/32
11/32
13/32
15/32
17/32
For Socket Head Screws, Add H to the End of Catalog Number

MATERIAL:
SPECIFICATIONS:
10
11
Tolerances
Decimals
.005
Fractions
1/64
Cap Screw Supplied
I.D.
12
13
Catalog Number
14
15
16

S3200Y-C043
S3200Y-C044
S3200Y-C045
1-248
.187
INCH COMPONENT
I.D.
Shaft
Size
+.001
-.000
Screw
Size
Clearance
Radius
1/16
1/8
3/16
.125
.187
.250
23/64
27/64
31/64
.218
.281
.344
#4-40
#4-40
#4-40
21/64
25/64
7/16

COMMERCIAL
R
Inch
MATERIAL:
303 Stainless Steel

SPECIFICATIONS:
Tolerances
Decimals
.01
Fractions
1/32
C
Stainless Steel Slotted Fillister

Head Screws Supplied
A
I.D.
INCH COMPONENT
Catalog Number
Hardened 416
Stainless Steel
303 Stainless Steel
S3401Y-J147-2
S3401Y-J147-3
S3401Y-J147-4
S3401Y-J147-5
S3401Y-J147-6
S3401Y-J147-2S
S3401Y-J147-3S
S3401Y-J147-4S
S3401Y-J147-5S
S3401Y-J147-6S
I.D.
Shaft
Size
+.004
-.000
1/8
3/16
1/4
5/16
3/8
.187
.250
.312
.375
.437
.500
.590
.687
.781
.890
.286
.350
.420
.510
.636
.156
.187
.187
.187
.250
Screw Clearance
Size
Radius
#2-56
#3-48
#4-40
#4-40
#6-32
9/32
11/32
13/32
15/32
17/32
For Socket Head Screws, Add H to The End of Catalog Number
5
6
7
8

MATERIAL:
SPECIFICATIONS:
10
Tolerances
Decimals
.01
Fractions
1/32
11

Cap Screw Supplied
I.D.
12
Catalog Number
S3200Y-J043
S3200Y-J044
S3200Y-J045
.187
INCH COMPONENT
I.D.
13
Shaft
Size
+.002
-.000
Screw
Size
Clearance
Radius
1/16
1/8
3/16
.125
.187
.250
23/64
27/64
31/64
.218
.281
.344
#4-40
#4-40
#4-40
21/64
25/64
7/16
1-249
14
15
16

PRECISION
R
T
1
2
MATERIAL:
Inch
303 Stainless Steel

Tolerances
Decimals
.005
Fractions
1/64
I.D.

Cap Screw Supplied
3
4
5
6
1
Precision
Component
SPECIFICATIONS:
INCH COMPONENT
Catalog Number
2024-T351
Anodized
S3402Y-C225
S3402Y-C226
S3402Y-C227
S3402Y-C231
S3402Y-C232
S3402Y-C233
S3402Y-C228
S3402Y-C229
S3402Y-C230
S3402Y-C234
S3402Y-C235
S3402Y-C236
Shaft
Size
+.001
-.000
I.D.
B
Dia.
Screw
Size
Clearance
Radius
1/8
3/16
1/4
3/32
1/8
3/16
.188
.250
.313
.125
.188
.250
7/8
7/8
7/8
9/16
9/16
9/16
.250
.250
.250
.156
.156
.156
#6-32
#6-32
#6-32
#2-56
#2-56
#2-56
33/64
33/64
33/64
25/64
25/64
25/64
7
8
COMMERCIAL
MATERIAL:
303 Stainless Steel

2024-T351 Aluminum
SPECIFICATIONS:
10
11
12
I.D.
Tolerances
Decimals
.01
Fractions
1/32
Cap Screw Supplied
INCH COMPONENT
Catalog Number
13
14
15
16
303 Stainless Steel

S3402Y-J225
S3402Y-J226
S3402Y-J227
S3402Y-J231
S3402Y-J232
S3402Y-J233
1-250
2024-T351
Aluminum
S3402Y-J228
S3402Y-J229
S3402Y-J230
S3402Y-J234
S3402Y-J235
S3402Y-J236
Shaft
Size
+.002
-.000
I.D.
B
Dia.
Screw
Size
Clearance
Radius
1/8
3/16
1/4
3/32
1/8
3/16
.188
.250
.313
.125
.188
.250
7/8
7/8
7/8
9/16
9/16
9/16
.250
.250
.250
.156
.156
.156
#6-32
#6-32
#6-32
#2-56
#2-56
#2-56
33/64
33/64
33/64
25/64
25/64
25/64

PRECISION AND COMMERCIAL
MATERIAL:
Inch
SPECIFICATIONS:
Precision Tolerances
Decimals
.005
Fractions
1/64
Commercial Tolerances
Decimals
.010
Fractions
1/32
I.D. Tolerances
+.001
Precision
-.000
+.002
Commercial
-.000
#2-56 Stainless Steel Socket

Head Cap Screws Supplied
A
I.D.
5
B
1/32
.240
INCH COMPONENT
Catalog Number
Precision
Commercial
Type of Balance: Dynamically Balanced

S3400Y-J240-3
S3400Y-C240-3
S3400Y-C240-4
S3400Y-J240-4
S3400Y-C240-5
S3400Y-J240-5
Type of Balance: As Machined
S3400Y-C241-3
S3400Y-J241-3
S3400Y-C241-4
S3400Y-J241-4
S3400Y-C241-5
S3400Y-J241-5
7
Shaft
Size
I.D.
Clearance
Radius
1/8
3/16
1/4
.188
.250
.312
23/32
3/4
7/8
5/16
3/8
7/16
23/64
3/8
7/16
1/8
3/16
1/4
.188
.250
.312
23/32
3/4
7/8
5/16
3/8
7/16
23/64
3/8
7/16
8
9
10
11
12
13
14
15
1-251
16
PRECISION SCREW-TYPE GEAR CLAMPS

MINIATURE FOR 1/16 SHAFT
MATERIAL:
Inch
303 Stainless Steel
T
1
SPECIFICATIONS:
1
Precision
Component
Tolerances
Decimals
.005
.62
Recommended for use with S9490A-T700 Differential.

Four Stainless Steel Socket Head Set Screws Supplied
I.D.
A
1/64 x 45
CHAMFER
BOTH ENDS
4
B
INCH COMPONENT
Catalog Number
303 Stainless Steel

S3600Y-C131
+.001
-.000
I.D.
A
Dia.
Screw
Size
.0995
.312
.125
#2-56
7
8
9
10
11
12
13
14
15
16
STANDARD
.125
MATERIAL:
303 Stainless Steel

2024-T351 Aluminum Anodized
SPECIFICATIONS:
I.D.
Tolerances
Decimals
.005
Four Stainless Steel Socket Head

Set Screws Supplied
1/64 x 45
CHAMFER
BOTH ENDS
B
INCH COMPONENT
Catalog Number
2024-T351
Anodized
S3600Y-C123
S3600Y-C124
S3600Y-C125
S3600Y-C126
1-252
S3600Y-C127
S3600Y-C128
S3600Y-C129
S3600Y-C130
+.001
-.000
I.D.
A
Dia.
Screw
Size
.1255
.1880
.2505
.3130
.375
.375
.500
.500
.250
.250
.250
.250
#4-40
#4-40
#6-32
#6-32
COMMERCIAL SCREW-TYPE GEAR CLAMPS

MINIATURE FOR 1/16 SHAFT
MATERIAL:
Inch
303 Stainless Steel
SPECIFICATIONS:
Tolerances
Decimals
.01
.62

Set Screws Supplied
I.D.
A
3
1/64 x 45
CHAMFER
BOTH ENDS
INCH COMPONENT
Catalog Number
303 Stainless Steel
S3600Y-J131
I.D.
+.002
-.000
A
Dia.
Screw
Size
.0995
.312
.125
#2-56
6
7
8
STANDARD
.125
MATERIAL:
303 Stainless Steel

2024-T351 Aluminum
10
SPECIFICATIONS:
I.D.
Tolerances
Decimals
.01
11

Set Screws Supplied
1/64 x 45
CHAMFER
BOTH ENDS
B
INCH COMPONENT
Catalog Number
303 Stainless Steel
S3600Y-J123
S3600Y-J124
S3600Y-J125
S3600Y-J126
2024-T351
Aluminum
S3600Y-J127
S3600Y-J128
S3600Y-J129
S3600Y-J130
12
+.002
-.000
I.D.
A
Dia.
Screw
Size
.1255
.1880
.2505
.3130
.375
.375
.500
.500
.250
.250
.250
.250
#4-40
#4-40
#6-32
#6-32
1-253
13
14
15
16
I
R
T
1
2
SPLINES & SPLINED BUSHINGS

EXTERNAL
INTERNAL
Inch
The splines are precision rolled with straight sides;

the bushings are broached. Splined bushings can
be used press-fitted or fastened to components
which require relative axial motion with respect to
the spline.
For suggested method of fastening, see drawing

below.
call on our application engineers.
22.5
SLIDING
SPLINED
BUSHING
22.5
4
d dn D
A
d dn
SPLINE
Fig. 1
Fig. 2
6
7
8
9
10
11
12
Fig. 1 External Spline Standards

dn
Nominal
Size
No.
of
Grooves
A
Straddled
Width
11/32
15/32
5/8
3/4
16
16
16
16
.099
.137
.181
.218
.311
.428
.578
.695
D
Major
Dia.
.379
.505
.675
.807
Fig. 2 Internal Spline Standards

dn
Nominal
Size
No.
of
Grooves
A
Straddled
Width
d
Minor
Dia.
D
Major
Dia.
11/32
15/32
5/8
3/4
16
16
16
16
.100
.1378
.183
.220
.326
.453
.601
.721
.385
.521
.700
.822
13
14
15
16
d
Minor
Dia.
1-254
SPLINES & SPLINED BUSHINGS

EXTERNAL
INTERNAL
MATERIAL:
Inch
Carbon Steel 1117

Carbon Steel 1215
Stainless Steel 416 Annealed
SPECIFICATION:
T
1
Internal Spline Bushings made of different materials

are available on request.
Internal Spline Bushings are Priced Per Piece
External Spline Bushings are Priced Per Stock Length
Discounts available for large quantity orders.

L 1/64
O.D. +.000
-.005
5
EXTERNAL SPLINE SHOWN
INTERNAL SPLINE BUSHING SHOWN
6
INCH COMPONENT
Catalog Number
Carbon Steel
1117
External Splines
A 1C25-34401
A 1C25-34402
A 1C25-34403
A 1C25-34404
A 1C25-34406
A 1C25-46801
A 1C25-46802
A 1C25-46803
A 1C25-46804
A 1C25-46806
A 1C25-62502
A 1C25-62504
A 1C25-62506
A 1C25-75002
A 1C25-75004
A 1C25-75006
Stainless Steel
416 Annealed
A 1Y25-34401
A 1Y25-34402
A 1Y25-34403
A 1Y25-34404
A 1Y25-34406
A 1Y25-46802
A 1Y25-46804
A 1Y25-62502
A 1Y25-62504
A 1Y25-62506
A 1Y25-75002
A 1Y25-75004
A 1Y25-75006
Catalog Number
Carbon Steel
1215
Stainless Steel
416 Annealed
Internal Spline Bushings
A 1Y26-34408S
A 1C26-34408
A 1Y26-34408
A 1C26-46808
A 1Y26-46808
A 1C26-62510
A 1Y26-62510
A 1C26-75012
A 1Y26-75012
Nominal
Size
No.
of
Teeth
Stock
Length
11/32
11/32
11/32
11/32
11/32
15/32
15/32
15/32
15/32
15/32
5/8
5/8
5/8
3/4
3/4
3/4
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
1
2
3
4
6
1
2
3
4
6
2
4
6
2
4
6
8
9
10
11
12
Nominal
Size
No.
of
Teeth
O.D.
L
Length
11/32
11/32
15/32
5/8
3/4
16
16
16
16
16
.625
1.000
1.000
1.250
1.500
.40
1
1
1-1/4
1-1/2
in.
1-255
REV: 05.14.12 mh
ft.
13
14
15
A
FAIRLOC THE INTEGRAL FASTENER

R
Inch
0
THE BETTER WAY TO FASTEN ROTATING COMPONENTS.
SolvesPhasing, Timing, Positioning and Frequent Removal Problems
HERES HOW IT WORKS:
2
3
Two slots are machined into the hub, one oriented radially, the other angularly,
to create a transverse wedge which remains attached to the solid portion
of the hub on one side. The resultant cantilevered clamping section has a
tapped hole to accept a cap screw which passes through a clearance hole in
the solid portion of the hub, and into a threaded hole in the transverse wedge
section. As the screw is tightened, the cantilevered section clamps the shaft
securely. The screw can be tightened and released repeatedly without
marring the shaft or affecting its torque transmitting abilities.
PROVED MOST EFFECTIVE:
4
5
6
7
8
9
10
For precision application Lab tests proved Fairloc to be superior

to all other comparable fasteners. For high torque application
Torques up to 400 lbf in. are obtained with a 5/8" bore Fairloc hub.
TYPICAL APPLICATION AREAS FOR FAIRLOC INCLUDE:

Computer Tape Drives, Aerospace Components, Aircraft
Instrumentation, Aircraft Fuel Control Systems, Machine Tools,
N/C Machines, Computer Input / Output Systems, Military Fire
Control Systems, Medical Equipment, Business Machines,
Optical Equipment, Power Drives.
13
14
15
16
HUB
FEATURES:
Full Use Of The Bore - Gives maximum support to the component,

reduces wobble or misalignment.
Easy Adjustment - Fairloc replaces set screws and clamps,
eliminates marred shafts; components can be repositioned with a
FRONT
single hex key adjustment.
Compact, Self-Contained Design - When available space or access is limited,
Fairlocs small hub envelope is a distinct advantage.
Very High Reliability
Call on our Engineering Department to discuss the advantages

of applying the Fairloc concept to your designs.
11
12
SOLID HINGE
PORTION
FASTENER SELECTOR GUIDE
TRANSVERSE
SLOT
RADIAL SLOT
BACK
Fairloc Hub Pulleys

Pitch
Page #
.080
1/5
3 mm HTD
5 mm HTD
2 mm GT2
3 mm GT2
2-27
2-76
2-121
2-147
2-167
2-185
Legend
Fastening Method
Clamps
Yes
No
No
Yes
No
A Shaft remains smooth
*Fairloc
Yes
Yes
Yes
Yes
Yes
B Self-contained
(no additional inventory)
Keys
No
No
No
No
No
Pins
No
No
No
No
Yes
D Easy adjustment
Set Screws
No
No
No
No
Yes
E Can be pinned if desired
* Patented
Registered trademark
2-2
2-0
C Component is fully supported
2 - BELT AND CHAIN DRIVES

R
Inch
Timing Belt Stock....................................................................................................................................................... 2-6
T
1
Timing Belt Clamps and Timing Belt Clamp Kits ................................................................................................. 2-9
Belt Tension Testers................................................................................................................................................. 2-14

Timing Belts, Pulleys, Flanges and Pulley Stock:
MXL .080" or 2.03 mm Pitch.............................................................................................................................. 2-15
40 D.P. 2.07 mm Pitch ........................................................................................................................................ 2-35
XL 1/5" or 5.08 mm Pitch .................................................................................................................................. 2-54
L 3/8" or 9.525 mm Pitch.................................................................................................................................... 2-99
HTD 3 mm Pitch............................................................................................................................................... 2-112
HTD 5 mm Pitch............................................................................................................................................... 2-134
HTD 8 mm Pitch............................................................................................................................................... 2-158
GT2 2 mm Pitch................................................................................................................................................ 2-161
GT2 3 mm Pitch................................................................................................................................................ 2-175
GT2 5 mm Pitch................................................................................................................................................ 2-192
3
4
5
6
Posi-Drive Belts, Pulleys and Sprockets.............................................................................................................. 2-204

Roller Chains and Sprockets .................................................................................................................................. 2-218
Ladder Chains and Sprockets ................................................................................................................................ 2-233
Synchromesh Drive Systems.................................................................................................................................. 2-248

Miniature Cables and Fittings................................................................................................................................. 2-254
Crimping Tools........................................................................................................................................................... 2-256
10
Round Endless Belts................................................................................................................................................. 2-257

Grooved Idler Pulleys............................................................................................................................................... 2-260
11
Flat Belts and Pulleys............................................................................................................................................... 2-266

Fractional H.P. V-Belts.............................................................................................................................................. 2-268
12
Companion Pulleys................................................................................................................................................... 2-269
13
Idler Pulleys with Needle Bearings....................................................................................................................... 2-271
14
15
2-1
16
TIMING BELTS & PULLEYS LOCATOR CHART

R
BELTS
T
1
Single-Sided
Double-Sided
Belt Stock
3
4
Neoprene
Polymer Compound
Polyurethane
Neoprene
Polyurethane
Neoprene
Polyurethane
PULLEYS
Aluminum
With Fairloc Hub

With Set Screw
L
Miniature MXL 40 D.P.
XL
HTD
1 mm
.08 .0816 1/5 (.200) 3/8 (.375) 3 mm
2-15
2-18
A 6B18M... 2-20
6
7
2-100
2-99
2-112
2-134
2-59
2-60
2-6
2-6
2-102
2-114
2-136
2-6
2-6
2-7
2-7
L
XL
HTD
1 mm
.08 .0816 1/5 (.200) 3/8 (.375) 3 mm
HTD
5 mm
2-27
A 6A18M 2-28
2-121
2-122
2-143
2-133
2-155
2-126
2-130
2-147
2-148
2-149
2-153
2-271
2-271
2-133
2-116
2-117
2-157
2-138
2-139
2-42
2-48
2-52
Acetal
2-56
2-54
2-35
2-22
2-6
Steel
With Insert
Without Insert
With Insert
Nylon
Without Insert
With Fairloc Hub
With Metal Hub
Polycarbonate
With Insert
Without Insert
Idler Pulleys with
Steel
Needle Bearings
Shaftloc
Pulley Flanges
Pulley Stock
2-31
2-32
2-33
2-65
2-70
2-92
2-97
2-94
2-76
2-78
2-80
2-87
2-105
2-106
2-109
2-107
2-271
A 6A17M 2-23
A 6A17M 2-24
2-39
2-40
2-97
2-61
2-62
2-111
2-103
2-104
10
HTD
8 mm
2-158
8
9
Inch
HTD HTD
8 mm 1
0 5 mm
TIMING BELT CLAMPS

Polycarbonate
Aluminum
L
XL
HTD
1 mm
.08 .0816 1/5 (.200) 3/8 (.375) 3 mm
2-9
2-9
2-10
2-9
2-10
HTD
5 mm
HTD
8 mm
2-9
2-11
2-11
11
12
NOTE: The items represented by a Part Number (blue tinted box)

can be found online or in the Metric Master Catalog D805.
13
14
15
16
2-2
TIMING BELTS & PULLEYS LOCATOR CHART

R
BELTS
Single-Sided
Double-Sided
Belt Stock
Neoprene
Polymer Compound
Polyurethane
Neoprene
Polyurethane
Neoprene
Polyurethane
PULLEYS
Aluminum
Steel
Acetal
Nylon
Polycarbonate
Steel
With Fairloc Hub

With Set Screw
With Insert
Without Insert
With Insert
Without Insert
With Fairloc Hub
With Metal Hub
With Insert
Without Insert
Idler Pulleys with
Needle Bearings
Shaftloc
Pulley Flanges
Pulley Stock
GT 2
2 mm
GT 2
3 mm
GT 2
5 mm
2-162
2-161
2-176
2-175
2-193
2-192
2-178
2-194
2-8
2-8
2-8
GT 2
2 mm
GT 2
3 mm
GT 2
5 mm
2-167
2-168
2-185
2-183
2-200
GT 2
8 mm
Inch
T10
10 mm
T5
0
5 mm
T2.5
2.5 mm
A 6T32M A 6T35M A 6T39M
2-187
2-190
2-164
2-165
2-180
2-181
GT 2
8 mm
T2.5
2.5 mm
2-7
2-7
T5
5 mm
T10
10 mm
A 6A32M A 6A35M
4
5
6
2-195
2-196
A 6A31M A 6A34M A 6A38M

A 6A31M A 6A34M A 6A38M
TIMING BELT
CLAMPS
Polycarbonate
Aluminum
GT 2 GT 2 GT 2 GT 2
2 mm 3 mm 5 mm 8 mm
2-9
2-12
2-9
2-12
2-9
2-13
A 6T35MD A 6T39MD
A 6M32M A 6M35M
2-171
2-172
T2.5
2.5 mm
T5
5 mm
T10
10 mm
AT
5 mm
AT
10 mm
A16A35M A16A39M A16A45M A16A49M
2-13
7
8
9
10
11
POSI-DRIVE BELT DRIVES
Belts
Sprockets
Polyurethane
Aluminum
Stainless Steel
Single Core
32 Pitch
Twin Core
CP .1475
Single Core
20 Pitch
Twin Core
20 Pitch
12
2-204
2-206
2-206
2-208
2-209
2-209
2-211
2-212
2-212
2-214
2-215
2-215
13
14
NOTE: The items represented by a Part Number (blue tinted box)

can be found online or in the Metric Master Catalog D805.
15
2-3
16
CHAIN, SYNCHROMESH AND OTHER BELT DRIVES

R
ROLLER CHAINS & SPROCKETS
T
1
Roller Chains
Stainless Steel
Nylatron GS
Hardened Steel
Acetal
Polypropylene
Polyvinylidene
Stainless Steel
Nylatron GS
Steel
Nylon
Acetal
Roller Chain
Sprockets
Idler Sprockets
Steel
with Needle
Bearings
LADDER CHAINS & SPROCKETS
5
Ladder Chains
6
7
8
9
Ladder Chain
Sprockets
Steel
Stainless Steel
High-Tensile Steel
Brass
Stainless Steel
Steel
Brass
Acetal with Insert
Acetal without Insert
Nylon
SYNCHROMESH DRIVES
Cable
Pulleys
Attachments
Stainless Steel
Acetal with Insert
.1475
Pitch
.1227
Pitch
2-220
2-222
2-218
2-221
2-222
#35
.375 (3/8)
Pitch
#40
.500
Inch(1/2)
Pitch
2-223
2-224
2-223
2-224
2-224
2-231
2-224
2-224
2-224
2-224
2-224
2-224
2-224
2-232
2-232
2-225
2-226
2-229
2-230
2-219
2-271
#21
.167
Pitch
#19
#.185
Pitch
2-233
2-233
2-233
2-235
2-235
2-235
2-235
2-233
2-234
#25
.250 (1/4)
Pitch
2-235
2-236
2-237
2-238
2-232
2-271
.250 (1/4)
Pitch
2-247
2-247
2-247
2-247
2-225
2-226
2-230
2-229
#18
.286
Pitch
#17
.353
Pitch
#14
.353
Pitch
2-239
2-239
2-239
2-239
2-243
2-243
2-243
2-243
2-244
2-244
2-244
2-244
2-239
2-240
2-241
2-242
.375 (3/8)
Pitch
2-247
2-247
2-244
2-243
2-245
2-245
2-246
.120
Pitch
.150
Pitch
.200
Pitch
.250
Pitch
2-250
2-251
2-252
2-250
2-251
2-250
2-251
2-250
2-251
10
OTHER BELT DRIVES
11
12
13
Neoprene
Polyurethane
Nylon
Grooved Idler Steel
Acetal
Pulleys
Nylon with Bearing
Stainless Steel
Grooved Pulleys
Acetal with Insert
Round Belts
14
15
16
2-4
Page Number
2-257
2-259
2-260
2-260
2-261
2-261
2-263
2-264
OTHER BELT DRIVES

Flat Belts
Flat Belt Pulleys
Idler Pulleys
with Needle
Bearings
Fractional
H.P. V-Belts
Companion
Pulleys
Idler Pulleys
with Needle
Bearings
Page Number
Polyester
Polycarbonate with
Insert
2-266
Steel
2-271
Rubber
2-268
Nylon
Nylon with Insert
2-269
2-269
Steel
2-271
2-267
Y
D
E
R IV
L
L
ES
U
YS
TE
M?
EE
DESIGN A
O
T
D
I
R
Inch
T
1
2
3
4
5
WE'VE MADE IT
EASY WITH OUR...
CENTER DISTANCE
DESIGNER PROGRAM
Allows the design of a pulley drive system
using our belt and pulley database.
Allows locating catalog pages featuring belts
and pulleys used.
Calculates minimum and actual center
distances, speed ratios and teeth in mesh
(T.I.M.) for both pulleys.
AVAILABLE AT:
www.sdp-si.com
OR CALL:
516-328-3300
6
7
8
9
10
11
Compiles two convenient tables:

12
a) A table of center distances vs. number of
belt teeth. It displays five sizes larger and
five sizes smaller stock belts than the actual
13
belt length.
b) A table of all pulley pairs within specified
14
speed ratio range.
CENTER DISTANCE
Exportable .DXF and .DWF drawings.
CALCULATOR
2-5
15
16
I
R
T
1
2
3
MXL, XL & L TIMING BELT STOCK

PITCH
INCH - .080, 1/5 & 3/8
METRIC - 2.032, 5.08 & 9.525 mm
Inch
MATERIAL:
Neoprene - Nylon Covered, Fiberglass Reinforced

Polyurethane - Reinforced with Steel Tensile Cords
SPECIFICATION:
Temperature Range:
Neoprene: -30F to +185F (-34C to +85C)
Polyurethane: -0F to +180F (-18C to +82C)
APPLICATIONS:
Metering, positioning, conveying and oscillating

drives where belt lengths required are longer
than standard endless belts.
See Pages 2-10 thru 2-13

for Clamping Plates
EXAMPLE OF APPLICATIONS:
4
5
6
7
8
9
10
11
12
13
14
15
16
A complete timing belt and a timing belt segment

reduced vibration and chatter in this oscillating
drive for a surface grinder.

Priced per Foot or Meter
.005 R
(0.13 R)
TYP
.080
(2.032)
.030
(0.76)
.018
(0.46)
.015 R
(0.4 R)
TYP
.200
(5.08)
.054
(1.4)
40
40
50
Fig. 1 MXL
.080 Pitch
(2.032 Pitch)
Fig. 2 XL
1/5 Pitch
(5.08 Pitch)
Metric
Inch
Neoprene - MXL
A 6Z16-C012
A 6Z16-C018
A 6Z16-C025
A 6Z16-C037
Neoprene - XL
A 6R 3-C025
A 6R 3-C037
A 6R 3-C050
Polyurethane - XL
A 6T 3-C025
A 6T 3-C037
A 6T 3-C050
Neoprene - L
A 6R 4-C050
A 6R 4-C075
A 6R 4-C100
Polyurethane - L
A 6T 4-C050
A 6T 4-C075
A 6T 4-C100
2-6
A
A
A
A
6Z16MC030
6Z16MC045
6Z16MC060
6Z16MC095
A 6R 3MC060
A 6R 3MC095
A 6R 3MC130
A 6T 3MC060
A 6T 3MC095
A 6T 3MC130
A 6R 4MC130
A 6R 4MC190
A 6R 4MC250
A 6T 4MC130
A 6T 4MC190
A 6T 4MC250
.375
(9.525)
Fig. 3 L
3/8 Pitch
(9.525 Pitch)
NOTE: Dimensions in ( ) are mm.
INCH COMPONENT
Catalog Number
.128
(3.25)
.14
(3.56)
.090
(2.3)
.045
(1.14)
.075
(1.9)
.050
(1.3)
.020 R
(0.5 R)
TYP
Fig.
No.
1
1
1
1

2
2
2

2
2
2

3
3
3

3
3
3
Belt Width
Pitch
No. of
Teeth Approx.
Inch
mm
Inch
mm
Per
Foot
Per
Meter
.080
.080
.080
.080
2.032
2.032
2.032
2.032
1/8
3/16
1/4
3/8
3
4.5
6
9.5
150
150
150
150
492
492
492
492
1/5
1/5
1/5
5.08
5.08
5.08
1/4
3/8
1/2
6
9.5
13
60
60
60
197
197
197
1/5
1/5
1/5
5.08
5.08
5.08
1/4
3/8
1/2
6
9.5
13
60
60
60
197
197
197
3/8
3/8
3/8
9.525
9.525
9.525
1/2
3/4
1
13
19
25
32
32
32
105
105
105
3/8
3/8
3/8
9.525
9.525
9.525
1/2
3/4
1
13
19
25
32
32
32
105
105
105
HTD & T TIMING BELT STOCK

METRIC - 3 & 5 mm HTD

T5 & T10 PITCH
PROFILE
R
Metric
Inch
MATERIAL:

Polyurethane - Reinforced with Steel Tensile Cords
101
SPECIFICATION:
Temperature Range:
Neoprene: -34C to +85C (-30F to +185F)
Polyurethane: -18C to +82C (0F to +180F)
APPLICATIONS:


for Clamping Plates

Priced per Meter
4
Fig. 3
T5 Pitch
Fig. 1
3 mm HTD
3
(.118)
0.4 R
(.016 R)
TYP
1.22
(.048)
2.41
(.095)
5
(.197)
2.65
(.104)
1.2
(.047)
2.2
(.087)
5
(.197)
0.6 R
(.024 R)
TYP
2.08
(.082)
3.81
(.150)
10
(.394)
5.3
(.209)
4.5
(.177)
Fig. 2
5 mm HTD
Fig. 4
T10 Pitch
Fig.
No.
Belt Width
Pitch
6
7
40
2.5
(.098)
8
9
40
NOTE: Dimensions in ( ) are inch.
METRIC COMPONENT
Catalog Number
No. of
Teeth Approx.
10
mm
Inch
mm
Inch
Per
Meter
Per
Foot
11
1
1
1
3
3
3
.118
.118
.118
6
9
25
.236
.354
.984
333
333
333
101
101
101
12
A 6R25MC060
A 6R25MC090
A 6R25MC130
A 6R25MC150
A 6R25MC250
Polyurethane - T
A 6T35MC100
A 6T35MC150
2
2
2
2
2
5
5
5
5
5
.197
.197
.197
.197
.197
6
9
13
15
25
.236
.354
.512
.591
.984
200
200
200
200
200
61
61
61
61
61
3
3
5
5
.197
.197
10
15
.394
.591
200
200
61
61
A 6T39MC150
A 6T39MC250
4
4
10
10
.394
.394
15
25
.591
.984
100
100
30
30
Neoprene - HTD
A 6R23MC060
A 6R23MC090
A 6R23MC250
2-7
13
14
15
16
I
R
T
GT2 TIMING BELT STOCK

PITCH
METRIC - 2, 3 & 5 mm GT2
PROFILE
Metric
Inch
MATERIAL:
101
SPECIFICATION:
1
2
3
4
5
Temperature Range:
-34C to +85C (-30F to +185F)
APPLICATIONS:

for Clamping Plates


Priced per Meter
Other widths available on special order.
6
2
(.079)
3
(.118)
0.76
(.030)
1.52
(.060)
5
(.197)
1.14
(.045)
2.41
(.095)
3.81
(.150)
Fig. 1
2 mm GT2
Fig. 2
3 mm GT2
Fig. 3
5 mm GT2
METRIC COMPONENT
9
10
11
12
Catalog Number
Fig.
No.
Belt Width
Pitch
No. of
Teeth Approx.
Per
Foot
152
152
152
A 6R51MC060
A 6R51MC090
A 6R51MC120
1
1
1
2
2
2
.079
.079
.079
6
9
12
.236
.354
.472
Per
Meter
500
500
500
A 6R53MC060
A 6R53MC090
A 6R53MC120
2
2
2
3
3
3
.118
.118
.118
6
9
12
.236
.354
.472
333
333
333
101
101
101
A 6R55MC090
A 6R55MC120
3
3
5
5
.197
.197
9
12
.354
.472
200
200
61
61
13
14
15
16
1.93
(.076)
2-8
mm
Inch
mm
Inch
TIMING BELT CLAMPS

FOR RECIPROCATING DRIVES
PATENT NO: US 7,810,219 B2
COMPACT
LOW INERTIA
FOR SINGLE- AND DOUBLE-SIDED BELTS
R
Inch
MATERIAL:
Base & Cover - Black Polycarbonate

Hardware - 303 Stainless Steel
SPECIFICATION:
Supplied with Hex Socket Cap Screw,

Flat Washers & Elastic Stop Nut.
.23 * (5.84)
L
.080 MXL (2.03)
L
2 mm GT2
.15
(3.81)
E/2
.24
(6.1)
.200 XL (5.08)
.34 * (8.64)
E
.24
(6.1)
3 mm HTD & 3 mm GT2
.34 * (8.64)
.05
(1.27)
B
.24
(6.1)
5 mm HTD & 5 mm GT2
COVER
MXL .080" Pitch

A 6M16M030
A 6M16M045
A 6M16M060
A 6M16M080
A 6M16M095
XL .200" Pitch
A 6M 3M060
A 6M 3M080
A 6M 3M095
GT2 2 mm Pitch
A 6M51M030
A 6M51M060
A 6M51M090
HTD & GT2 3 mm Pitch

A 6M53M060
A 6M53M090
HTD & GT2 5 mm Pitch
A 6M55M060
A 6M55M090
A 6M55M150
.34 * (8.64)
L
BASE
INCH COMPONENT
Catalog Number
.125 (3.18)
.122 (3.1)
Belt Width
E
Cover
Width
L
Length
.093 (2.36)
.093 (2.36)
.125 (3.18)
.145 (3.68)
.145 (3.68)
.500 (12.7)
.500 (12.7)
.500 (12.7)
.500 (12.7)
.500 (12.7)
.32 (8.13)
.39 (9.91)
.45 (11.43)
.50 (12.7)
.57 (14.48)
.750 (19.05)
.750 (19.05)
.750 (19.05)
.750 (19.05)
.750 (19.05)
Inch
mm
1/8
3/16
1/4
5/16
3/8
3
4.5
6
8
9.5
.135
.197
.260
.322
.385
1/4
5/16
3/8
6
8
9.5
.265 (6.73) .380 (9.65) .125 (3.18) 1.000 (25.4) .50 (12.7)
.327 (8.31) .380 (9.65) .145 (3.68) 1.000 (25.4) .63 (16)
.390 (9.91) .380 (9.65) .145 (3.68) 1.000 (25.4) .63 (16)
3
6
9
.130 (3.3) .168 (4.27) .093 (2.36)

.250 (6.35) .168 (4.27) .125 (3.18)
.370 (9.4) .168 (4.27) .145 (3.68)
6
9
6
9
15
(3.43)
(5)
(6.6)
(8.18)
(9.78)
.160
.160
.160
.160
.160
(4.06)
(4.06)
(4.06)
(4.06)
(4.06)
9
10
11
1.880 (47.75)
1.880 (47.75)
1.880 (47.75)
12
.750 (19.05)
.750 (19.05)
.750 (19.05)
13
.250 (6.35) .298 (7.57) .125 (3.18) 1.000 (25.4) .50 (12.7)
.370 (9.4) .298 (7.57) .145 (3.68) 1.000 (25.4) .63 (16)
1.880 (47.75)
1.880 (47.75)
14
.250 (6.35) .430 (10.92) .125 (3.18) 1.000 (25.4) .50 (12.7)
.370 (9.4) .430 (10.92) .145 (3.68) 1.000 (25.4) .63 (16)
.605 (15.37) .430 (10.92) .145 (3.68) 1.000 (25.4) .87 (22.1)
1.880 (47.75)
1.880 (47.75)
1.880 (47.75)
15
.500 (12.7) .32 (8.13)

.500 (12.7) .45 (11.43)
.500 (12.7) .57 (14.48)
* Dimensions when used with single sided belts.
2-9
16
XL & L TIMING BELT CLAMP KITS 1/5" & 3/8" PITCH

USED IN LINEAR DRIVES
MATERIAL:
Inch
Aluminum
T
1
2
SPECIFICATIONS:
Hardware for kit includes:

Screws, Washers and Hex Nuts for Assembly
For Replacement hardware kit, order:
A16A 3-BOLTKIT XL 1/5 inch pitch
A16A 4-BOLTKIT L 3/8 inch pitch
XL 1/5 Inch Pitch
Timing Belt Clamp Kit includes:

Top and Bottom Plate and Hardware for Assembly
3
4
1
in.
in.
in. Dia.
in.
in.
in.
(mm) (mm) (mm) in. (mm) (mm) (mm)
(mm)
.290 .370 .320 .375 1.000 .190 .380
(7.4) (9.4) (8.1) (9.5) (25.4) (4.8) (9.65)
.370
(9.4)
.685
(17.4)
L 3/8 Inch Pitch

.590 .531 1.875 .320
(15) (13.5) (47.6) (0.81)
Top
Plate
.630
(16)
PITCH
5X
PITCH
7X
PITCH
A
D
6
M
B
F
X
D
8
Bottom
Plate
H
K
10
M
E
11
12
13
14
S1
INCH COMPONENT
Catalog Number
XL 1/5" Pitch - Sold as Kit
A16A 3-025
A16A 3-031
A16A 3-037
L 3/8" Pitch - Sold as Kit
A16A 4-050
A16A 4-075
15
16
2-10
Belt
Width
in.
(mm)
in.
(mm)
D
Dia.
Toothed + Flat Plate

Total Weight
in.
(mm)
(with hardware) lb. (kg)
.51 (13)
.57 (14.5)
.64 (16.3)
.12 (0.054)
.13 (0.060)
.14 (0.064)
.500 (12.7) 3.245 (82.4) .310 (7.9) 1.62 (41.1) .344 (8.7) .88 (22.4)
.750 (19.1) 3.245 (82.4) .310 (7.9) 1.87 (47.5) .344 (8.7) 1.13 (28.7)
.58 (0.263)
.67 (0.304)
in.
(mm)
in.
(mm)
in.
(mm)
.25 (6.35) 1.740 (44.2) .170 (4.3) 1.09 (27.7) .221 (5.6)
.3125 (7.94) 1.740 (44.2) .170 (4.3) 1.15 (29.2) .221 (5.6)
.375 (9.53) 1.740 (44.2) .170 (4.3) 1.22 (31)
.221 (5.6)
HTD TIMING BELT CLAMP KITS 5 & 8 mm PITCH

MATERIAL:
Metric
Inch
Aluminum
SPECIFICATIONS:
101


A16A25MBOLTKIT HTD5 mm pitch
A16A28MBOLTKIT HTD8 mm pitch
2
3
5 mm Pitch
H
Dia.
S1
mm mm mm
mm (in.) (in.) (in.)
(in.)
7.5
10
8
10
25
5
10
(.295) (.394) (.315) (.394) (.984) (.197) (.394)
mm
(in.)
mm
(in.)
mm
(in.)
8 mm Pitch
10
16
15
15
40
8
16
(.394) (.630) (.591) (.591) (1.574) (.315) (.630)
Top
Plate
PITCH
5X
PITCH
7X
PITCH
A
D
7
D
10
S1
METRIC COMPONENT
HTD 5 mm Pitch - Sold as Kit

6 (.236) & 9 (.354)
A16A25M09
A16A25M15
15 (.591)
A16A25M25
25 (.984)
HTD 8 mm Pitch - Sold as Kit
A16A28M20
20 (.787)
A16A28M30
30 (1.181)
A16A28M50
50 (1.969)
mm
(in.)
mm
(in.)
Bottom
Plate
mm
(in.)
B
F
Belt
Width
Catalog Number
mm
(in.)
D
Dia.
mm
(in.)
mm
(in.)
45 (1.772)
45 (1.772)
45 (1.772)
5 (.197) 31.5 (1.24)

5 (.197) 36.5 (1.44)
5 (.197) 46.5 (1.83)
5.5 (.217) 16.5 (.650)

5.5 (.217) 21.5 (.846)
5.5 (.217) 31.5 (1.24)
72 (2.835)
72 (2.835)
72 (2.835)
8 (.315) 50.5 (1.988) 9 (.354) 30.5 (1.201)

8 (.315) 60.5 (2.382) 9 (.354) 40.5 (1.594)
8 (.315) 80.5 (3.169) 9 (.354) 60.5 (2.382)

Total Weight
(with hardware)
kg (lb.)
11
12
0.068 (.15)
0.068 (.15)
0.100 (.22)
13
0.272 (.60)
0.331 (.73)
0.449 (.99)
14
15
2-11
16
GT2 TIMING BELT CLAMP KITS 2 & 3 mm PITCH

MATERIAL:
Metric
Inch
Aluminum
T
1
2

A16A51MBOLTKIT GT2 2 mm pitch
2 mm Pitch
101

3
4
SPECIFICATIONS:
H
Dia.
S1
mm mm mm
(in.)
4.7
4
4
4.4
10
2
4
(.185) (.157) (.157) (.173) (.394) (.079) (.157)
mm
(in.)
mm
(in.)
mm
(in.)
3 mm Pitch
5.8
6
5
6.5
15
3
6
(.228) (.236) (.197) (.256) (.591) (.118) (.236)
Top
Plate
PITCH
5X
PITCH
7X
PITCH
A
D
6
M
B
F
X
D
8
Bottom
Plate
H
K
10
M
E
11
12
13
14
Catalog Number
Belt
Width
mm
(in.)
GT2 2 mm Pitch - Sold as Kit

4 (.157)
A16A51M04
6 (.236)
A16A51M06
9 (.354)
A16A51M09
GT 2 3 mm Pitch - Sold as Kit

6 (.236)
A16A53M06
9 (.354)
A16A53M09
15
16
S1
METRIC COMPONENT
2-12
mm
(in.)
D
Dia.
mm
(in.)
18 (.709)
18 (.709)
18 (.709)
2 (.079)
2 (.079)
2 (.079)
16.8 (.661) 2.4 (.094) 7.4 (.291)

18.8 (.740) 2.4 (.094) 9.4 (.370)
21.8 (.858) 2.4 (.094) 12.4 (.488)
0.006 (.01)
0.015 (.03)
0.017 (.04)
27 (1.063)
27 (1.063)
3 (.118)
3 (.118)
22 (.866) 3.4 (.134) 10.4 (.409)

25 (.984) 3.4 (.134) 13.4 (.528)
0.016 (.04)
0.019 (.04)
mm
(in.)
mm
(in.)

Total Weight
mm
(in.)
(with hardware) kg (lb.)
GT2 TIMING BELT CLAMP KITS 5 & 8 mm PITCH

MATERIAL:
Metric
Inch
Aluminum
SPECIFICATIONS:
101


2
3
5 mm Pitch
H
Dia.
S1
mm mm mm
(in.)
7.5
10
8
10
25
5
10
(.295) (.394) (.315) (.394) (.984) (.197) (.394)
mm
(in.)
mm
(in.)
mm
(in.)
8 mm Pitch
10
16
15
15
40
8
16
(.394) (.630) (.591) (.591) (1.575) (.315) (.630)
Top
Plate
PITCH
5X
PITCH
7X
PITCH
A
D
4
5
6
B
F
7
D
8
Bottom
Plate
H
A
10
S1
METRIC COMPONENT
Catalog Number
Belt
Width
mm
(in.)

9 (.354)
A16A55M09
A16A55M15
15 (.591)
A16A55M25
25 (.984)
20 (.787)
A16A58M20
30 (1.181)
A16A58M30
A16A58M50
50 (1.968)
mm
(in.)
mm
(in.)
mm
(in.)
D
Dia.
mm
(in.)
11
E
mm
(in.)

Total Weight
(with hardware) kg (lb.)
12
45 (1.772) 5 (.197)
45 (1.772) 5 (.197)
45 (1.772) 5 (.197)
30.5 (1.201)
37 (1.457)
47 (1.850)
5.5 (.217) 15.5 (.610)

5.5 (.217) 22 (.866)
5.5 (.217) 32 (1.260)
0.056 (.12)
0.074 (.16)
0.096 (.21)
13
72 (2.835) 8 (.315)
72 (2.835) 8 (.315)
72 (2.835) 8 (.315)
50.5 (1.988)
60.5 (2.382)
81 (3.189)
9 (.354) 30.5 (1.201)

9 (.354) 40.5 (1.594)
9 (.354) 61 (2.401)
0.272 (.60)
0.334 (.73)
0.448 (.99)
14
15
2-13
16
I
R
T
1
2
3
4
5
6
7
8
9
BELT TENSION TESTERS

FAST, ACCURATE TENSION READINGS
EASY-TO-USE
COMPACT & LIGHT
RoHS COMPLIANT
Inch
FEATURES:
Suitable for multi-ribbed belts, V-belts

and synchronous belts.
Output reading measurable in hertz,
pounds, kilograms and newtons.
Frequency range from 10-5000 hertz.
Measured accuracy: 1%.
Variable frequency range filters.
Auto gain control automatically adjusts
meter sensitivity.
LCD screen backlight.
20 memory registers for belt constants.
Testing tension with a spring tester requires muscle,

a piece of string and at least three hands! The Sonic
Tension Meter works on the theory that belts, like strings,
vibrate at a particular natural frequency based on mass
and span length. The meter converts this frequency into
a measurement of tension.
To test tension:
1. Enter belt mass constant, belt width & span length
into meter.
2. Hold meter to belt span, then strum belt to make it
vibrate. The meter will measure the vibration and
converts into belt tension.
Model 507C
shown with Cord Sensor
INCH COMPONENT
Catalog Number
Sonic Tension Meter with Cord Sensor
A14Z 6-742004
Model
507C
OPTIONAL ACCESSORIES
10
11
12
13
A14Z 7-742010
Inductive Sensor:
use in high-noise or windy
environments
PENCIL TYPE TENSION GAUGE
Maximum Deflection Force: 30 lbs
INCH COMPONENT
14
15
16
Catalog Number
A14Z 6-740176
2-14
A14Z 7-742005
New Flexible Flat
Sensor:
allows belt tension
measurements to
be taken in narrow
spaces where
previously it was not
possible.
A14Z 7-742006
Replacement Cord Sensor
A14Z 7-742008
Replacement A/C
Adapter:
only available for former
Model 305FD
MXL TIMING BELTS .080" OR 2.03 mm PITCH

BELT WIDTHS
INCH - 1/8, 3/16, 1/4, 5/16 & 3/8
METRIC - 3, 4.5, 6, 8 & 9.5 mm
R
Inch
MATERIAL:
SPECIFICATIONS:
Breaking Strength:
51 lbf per 1/8 in. (72 N per 1 mm) Belt Width;
not representative of the load-carrying
capacity of the belt.
Working Tension:
18 lbf for 1 in. belt (80 N for 25.4 mm Belt)
For more information, see the technical section.
Temperature Range:
-30F to +185F (-34C to +85C)
1
2
3
.005 R
(0.13 R)
TYP
MODIFICATIONS:
Special Widths - cut to size from

sleeves available from stock.
Pulleys are available with inch

or metric standards.
.080
(2.032)
.030
(0.76)
.018
(0.46)
.045
(1.14)
BELT WIDTH
5
40
INCH COMPONENT
CATALOG NUMBER
A 6Z16No. of
Grooves
Code
Belt Width
Inch
1/8
3/16
1/4
5/16
3/8
Width
Code
012
018
025
031
037
METRIC COMPONENT
CATALOG NUMBER
A 6Z16M
No. of
Grooves
Code
Belt Width
mm
3
4.5
6
8
9.5
Width
Code
030
045
060
080
095
Pitch Length
Groove
Code
Inch
036
037
039
040
041
042
043
044
045
046
047
048
049
050
052
053
054
055
056
057
058
059
060
061
062
063
064
065
2.88
2.96
3.12
3.20
3.28
3.36
3.44
3.52
3.60
3.68
3.76
3.84
3.92
4.00
4.16
4.24
4.32
4.40
4.48
4.56
4.64
4.72
4.80
4.88
4.96
5.04
5.12
5.20
Pitch Length
mm
Groove
Code
Inch
mm
73.15
75.18
79.25
81.28
83.31
85.34
87.38
89.41
91.44
93.47
95.5
97.54
99.57
101.6
105.66
107.7
109.73
111.76
113.79
115.82
117.86
119.89
121.92
123.95
125.98
128.02
130.05
132.08
067
068
069
070
071
072
073
074
075
076
077
078
079
080
081
082
083
084
085
086
087
088
089
090
091
092
093
094
5.36
5.44
5.52
5.60
5.68
5.76
5.84
5.92
6.00
6.08
6.16
6.24
6.32
6.40
6.48
6.56
6.64
6.72
6.80
6.88
6.96
7.04
7.12
7.20
7.28
7.36
7.44
7.52
136.14
138.18
140.21
142.24
144.27
146.3
148.34
150.37
152.4
154.43
156.46
158.5
160.53
162.56
164.59
166.62
168.66
170.69
172.72
174.75
176.78
178.82
180.85
182.88
184.91
186.94
188.98
191.01
2-15
6
7
8
9
10
11
12
13
14
15
16

R
Inch
T
1
2
3
4
5
6
7
8
9
10
11
12
13
Groove
Code
Inch
mm
Groove
Code
095
145
7.60
193.04
096
146
7.68
195.07
097
147
7.76
197.1
098
148
7.84
199.14
099
149
7.92
201.17
100
150
8.00
203.2
101
151
8.08
205.23
102
153
8.16
207.26
103
154
8.24
209.3
104
155
8.32
211.33
105
156
8.40
213.36
106
158
8.48
215.39
107
159
8.56
217.42
108
160
8.64
219.46
109
162
8.72
221.49
110
163
8.80
223.52
112
164
8.96
227.58
114
165
9.12
231.65
115
166
9.20
233.68
117
167
9.36
237.74
118
169
9.44
239.78
119
170
9.52
241.81
120
171
9.60
243.84
* 121
175
9.68
245.87
122
177
9.76
247.9
123
180
9.84
249.94
124
184
9.92
251.97
125
186
10.00
254
126
188
10.08
256.03
127
190
10.16
258.06
128
192
10.24
260.1
129
194
10.32
262.13
130
195
10.40
264.16
131
196
10.48
266.19
132
200
10.56
268.22
134
203
10.72
272.29
135
204
10.80
274.32
136
205
10.88
276.35
137
208
10.96
278.38
138
210
11.04
280.42
139
212
11.12
282.45
140
215
11.20
284.48
142
216
11.36
288.54
143
220
11.44
290.58
144
221
292.61
11.52
14
15
16
Pitch Length
2-16
Pitch Length
Inch
mm
11.60
11.68
11.76
11.84
11.92
12.00
12.08
12.24
12.32
12.40
12.48
12.64
12.72
12.80
12.96
13.04
13.12
13.20
13.28
13.36
13.52
13.60
13.68
14.00
14.16
14.40
14.72
14.88
15.04
15.20
15.36
15.52
15.60
15.68
16.00
16.24
16.32
16.40
16.64
16.80
16.96
17.20
17.28
17.60
17.68
294.64
296.67
298.7
300.74
302.77
304.8
306.83
310.9
312.93
314.96
316.99
321.06
323.09
325.12
329.18
331.22
333.25
335.28
337.31
339.34
343.41
345.44
347.47
355.6
359.66
365.76
373.89
377.95
382.02
386.08
390.14
394.21
396.24
398.27
406.4
412.5
414.53
416.56
422.66
426.72
430.78
436.88
438.91
447.04
449.07
Groove
Code
1
Pitch Length
Inch
mm
222
17.76
451.1
224
17.92
455.17
225
18.00
457.2
226
18.08
459.23
228
18.24
463.3
229
18.32
465.33
230
18.40
467.36
232
18.56
471.42
234
18.72
475.49
235
18.80
477.52
236
18.88
479.55
239
19.12
485.65
240
19.20
487.68
243
19.44
493.78
245
19.60
497.84
248
19.84
503.94
249
19.92
505.97
250
20.00
508
251
20.08
510.03
255
20.40
518.16
256
20.48
520.19
260
20.80
528.32
262
20.96
532.38
265
21.20
538.48
267
21.36
542.54
268
21.44
544.58
271
21.68
550.67
273
21.84
554.74
275
22.00
558.8
280
22.40
568.96
281
22.48
570.99
285
22.80
579.12
288
23.04
585.22
290
23.20
589.28
295
23.60
599.44
297
23.76
603.5
298
23.84
605.54
300
24.00
609.6
305
24.40
619.76
308
24.64
625.86
310
24.80
629.92
312
24.96
633.98
315
25.20
640.08
318
25.44
646.18
320
650.24
25.60
and Continued on the next page

R
Inch
0
INCH COMPONENT
CATALOG NUMBER
A 6Z16No. of
Grooves
Code
Belt Width
Inch
1/8
3/16
1/4
5/16
3/8
Width
Code
012
018
025
031
037
METRIC COMPONENT
CATALOG NUMBER
A 6Z16M
No. of
Grooves
Code
Belt Width
mm
3
4.5
6
8
9.5
Width
Code
030
045
060
080
095
Pitch Length
Groove
Code
Inch
322
323
324
325
326
328
330
332
334
336
337
338
339
340
342
343
347
350
354
355
356
358
359
360
364
365
371
372
380
388
390
397
400
402
405
408
410
412
413
419
420
421
424
425
427
431
434
435
25.76
25.84
25.92
26.00
26.08
26.24
26.40
26.56
26.72
26.88
26.96
27.04
27.12
27.20
27.36
27.44
27.76
28.00
28.32
28.40
28.48
28.64
28.72
28.80
29.12
29.20
29.68
29.76
30.40
31.04
31.20
31.76
32.00
32.16
32.40
32.64
32.80
32.96
33.04
33.52
33.60
33.68
33.92
34.00
34.16
34.48
34.72
34.80
1
Pitch Length
mm
Groove
Code
Inch
mm
654.3
656.34
658.37
660.4
662.43
666.5
670.56
674.62
678.69
682.75
684.78
686.82
688.85
690.88
694.94
696.98
705.1
711.2
719.33
721.36
723.39
727.46
729.49
731.52
739.65
741.68
753.87
755.9
772.16
788.42
792.48
806.7
812.8
816.86
822.96
829.06
833.12
837.18
839.22
851.41
853.44
855.47
861.57
863.6
867.66
875.79
881.89
883.92
436
440
442
447
448
453
458
463
464
466
468
472
473
475
480
482
487
488
490
493
497
498
500
505
516
522
524
525
532
535
537
540
543
546
548
550
571
591
592
599
600
612
648
665
681
694
913
* 1189
34.88
35.20
35.36
35.76
35.84
36.24
36.64
37.04
37.12
37.28
37.44
37.76
37.84
38.00
38.40
38.56
38.96
39.04
39.20
39.44
39.76
39.84
40.00
40.40
41.28
41.76
41.92
42.00
42.56
42.80
42.96
43.20
43.44
43.68
43.84
44.00
45.68
47.28
47.36
47.92
48.00
48.96
51.84
53.20
54.48
55.52
73.04
95.12
885.95
894.08
898.14
908.3
910.34
920.5
930.66
940.82
942.85
946.91
950.98
959.1
961.14
965.2
975.36
979.42
989.58
991.62
995.68
1001.78
1009.9
1011.94
1016
1026.16
1048.51
1060.7
1064.77
1066.8
1081.02
1087.12
1091.18
1097.28
1103.38
1109.47
1113.54
1117.6
1160.27
1200.91
1202.94
1217.17
1219.2
1243.58
1316.74
1351.28
1383.79
1410.21
1855.22
2416.05
* The catalog number for this length belt is A 6Z16 B89

T
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
2-17
16
I
R
T

BELT WIDTHS
INCH - 1/8, 3/16, 1/4, 5/16 & 3/8
METRIC - 3, 4, 5, 6, 8 & 9.5 mm
NON-MARKING
LOW DUST
RoHS COMPLIANT
PowerGrip TruMotion
MATERIAL:
SPECIFICATIONS:
3
4
5
6
7
10
11
12
Breaking Strength:
Working Tension:
Temperature Range:
-40F to +220F (-40C to +104C)
.005 R
(0.13 R)
TYP

BELT WIDTH
INCH COMPONENT
CATALOG NUMBER
A26Z16No. of
Grooves
Code
Width
Code
012
018
025
031
037
METRIC COMPONENT
CATALOG NUMBER
A26Z16M
No. of
Grooves
Code
14
15
2-18
.018
(0.46)
40

Belt Width
Inch
1/8
3/16
1/4
5/16
3/8
.080
(2.032)
.030
(0.76)
.045
(1.14)
MODIFICATIONS:
13
16
Inch
Cream-Colored Polymer Compound, Fiberglass

Reinforced Body with Nylon Tooth Facing for Reduced Dust.
8
9
Belt Width
mm
Width
Code
3
4.5
6
8
9.5
030
045
060
080
095
Pitch Length
Groove
Code
Inch
040
042
045
047
050
054
055
057
058
059
060
061
064
065
067
068
070
071
072
074
076
077
079
080
082
083
085
3.20
3.36
3.60
3.76
4.00
4.32
4.40
4.56
4.64
4.72
4.80
4.88
5.12
5.20
5.36
5.44
5.60
5.68
5.76
5.92
6.08
6.16
6.32
6.40
6.56
6.64
6.80
Pitch Length
mm
Groove
Code
Inch
mm
81.28
85.34
91.44
95.5
101.6
109.73
111.76
115.82
117.86
119.89
121.92
123.95
130.05
132.08
136.14
138.18
142.24
144.27
146.3
15.037
154.43
156.46
160.53
162.56
166.62
168.66
172.72
087
088
090
092
093
094
095
097
100
102
103
105
106
107
108
109
110
112
114
120
122
123
125
126
130
132
140
6.96
7.04
7.20
7.36
7.44
7.52
7.60
7.76
8.00
8.16
8.24
8.40
8.48
8.56
8.64
8.72
8.80
8.96
9.12
9.60
9.76
9.84
10.00
10.08
10.40
10.56
11.20
176.78
178.82
182.88
186.94
188.98
191.01
193.04
197.1
203.2
207.26
209.3
213.36
215.39
217.42
219.46
221.49
223.52
227.58
231.65
243.84
247.9
249.94
254
256.03
264.16
268.22
284.48

R
Inch
INCH COMPONENT
CATALOG NUMBER
A26Z16No. of
Grooves
Code
Belt Width
Inch
1/8
3/16
1/4
5/16
3/8
Width
Code
012
018
025
031
037
METRIC COMPONENT
CATALOG NUMBER
A26Z16M
No. of
Grooves
Code
Belt Width
mm
Width
Code
3
4.5
6
8
9.5
030
045
060
080
095
T
1
Pitch Length
Groove
Code
Inch
mm
144
150
153
155
165
166
170
175
180
184
190
195
200
208
210
212
215
221
222
225
230
245
248
249
11.52
12.00
12.24
12.40
13.20
13.28
13.60
14.00
14.40
14.72
15.20
15.60
16.00
16.64
16.80
16.96
17.20
17.68
17.76
18.00
18.40
19.60
19.84
19.92
292.61
304.8
310.9
314.96
335.28
337.31
345.44
355.6
365.76
373.89
386.08
396.24
406.4
422.66
426.72
430.78
436.88
449.07
451.1
457.2
467.36
497.84
503.94
505.97
Groove
Code
Pitch Length
Inch
mm
250
508
20.00
251
510.03
20.08
260
528.32
20.80
265
538.48
21.20
280
568.96
22.40
295
599.44
23.60
300
609.6
24.00
315
640.08
25.20
324
658.37
25.92
347
705.1
27.76
371
753.87
29.68
372
755.9
29.76
400
812.8
32.00
412
837.18
32.96
424
861.57
33.92
434
881.89
34.72
435
883.92
34.80
440
894.08
35.20
453
920.5
36.24
487
989.58
38.96
498
1011.94
39.84
600
1219.2
48.00
612
1243.58
48.96
648
1316.74
51.84
2
3
4
5
6
7
8
9
10
11
12
13
14
15
2-19
16
I
R

BELT WIDTHS
INCH - 1/8, 3/16, 1/4, 5/16 & 3/8
METRIC - 3, 4.5, 6, 8 & 9.5 mm
Inch
MATERIAL:
T
1
2
3
Body - Polyurethane
Cord - Polyester Balanced Construction or Kevlar
SPECIFICATIONS:
Breaking Strength:
< 155 Grooves - 40 lbf per 1/8 in. (56 N per 1 mm) Belt Width
155 Grooves - 80 lbf per 1/8 in. (112 N per 1 mm) Belt Width
Breaking Strength is not representative of the
load-carrying capacity of the belt.
Temperature Range:
Continuous: -30F to +185F (-34C to +85C)
Intermittent: up to +250F (+121C)
MODIFICATIONS:

.080
(2.032)
.024
(0.6)
.018
(0.46)
.048
(1.2)

BELT WIDTH
60
6
7
8
INCH COMPONENT
CATALOG NUMBER
A 6 16Polyester Cord G
Kevlar Cord
B
Belt Width
Inch
1/8
3/16
1/4
5/16
3/8
9
10
11
12
13
Width
Code
012
018
025
031
037
METRIC COMPONENT
CATALOG NUMBER
A 6 16M
Polyester Cord G
Kevlar Cord
B
No. of
Grooves
Code
Belt Width
mm
3
4.5
6
8
9.5
14
15
16
No. of
Grooves
Code
Width
Code
030
045
060
080
095
Pitch Length
Groove
Code
Inch
mm
030
035
036
040
045
046
048
050
051
054
055
060
061
064
065
068
070
071
073
075
078
079
080
082
083
085
087
088
2.40
2.80
2.88
3.20
3.60
3.68
3.84
4.00
4.08
4.32
4.40
4.80
4.88
5.12
5.20
5.44
5.60
5.68
5.84
6.00
6.24
6.32
6.40
6.56
6.64
6.80
6.96
7.04
60.96
71.12
73.15
81.28
91.44
93.47
97.53
101.6
103.63
109.73
111.76
121.92
123.95
130.05
132.08
138.18
142.24
144.27
148.34
152.4
158.5
160.53
162.56
166.62
168.66
172.72
176.78
178.82
* This belt not available with kevlar cord.
2-20
Groove
Code
* 089
090
091
093
095
097
100
102
103
105
106
110
112
114
115
118
120
122
123
125
126
130
132
135
140
144
145
150
Pitch Length
Inch
mm
7.12
7.20
7.28
7.44
7.60
7.76
8.00
8.16
8.24
8.40
8.48
8.80
8.96
9.12
9.20
9.44
9.60
9.76
9.84
10.00
10.08
10.40
10.56
10.80
11.20
11.52
11.60
12.00
180.85
182.88
184.91
188.98
193.04
197.1
203.2
207.26
209.3
213.36
215.39
223.52
227.58
231.65
233.68
239.77
243.84
247.9
249.93
254
256.03
264.16
268.22
274.32
284.48
292.61
294.64
304.8

R
Inch
T
1
INCH COMPONENT
CATALOG NUMBER
A 6 16Polyester Cord G
Kevlar Cord
B
No. of
Grooves
Code
Belt Width
Inch
1/8
3/16
1/4
5/16
3/8
Width
Code
012
018
025
031
037
METRIC COMPONENT
CATALOG NUMBER
A 6 16M
Polyester Cord G
Kevlar Cord
B
No. of
Grooves
Code
Belt Width
mm
3
4.5
6
8
9.5
Width
Code
030
045
060
080
095
Pitch Length
Groove
Code
Inch
mm
155
160
165
170
175
180
184
185
190
195
200
205
210
212
215
220
225
230
235
240
245
249
250
255
260
265
12.40
12.80
13.20
13.60
14.00
14.40
14.72
14.80
15.20
15.60
16.00
16.40
16.80
16.96
17.20
17.60
18.00
18.40
18.80
19.20
19.60
19.92
20.00
20.40
20.80
21.20
314.96
325.12
335.28
345.44
355.6
365.76
373.88
375.92
386.08
396.24
406.4
416.56
426.72
430.78
436.88
447.04
457.2
467.36
477.52
487.68
497.84
505.97
508
518.16
528.32
538.48
Groove
Code
270
275
280
285
290
295
300
310
315
320
324
330
340
350
360
370
380
390
400
403
* 420
434
454
482
502
515
** 1500
Pitch Length
Inch
mm
21.60
22.00
22.40
22.80
23.20
23.60
24.00
24.80
25.20
25.60
25.92
26.40
27.20
28.00
28.80
29.60
30.40
31.20
32.00
32.24
33.60
34.72
36.32
38.56
40.16
41.20
120.00
548.64
558.8
568.96
579.12
589.28
599.44
609.6
629.92
640.08
650.24
658.37
670.56
690.88
711.2
731.52
751.84
772.16
792.48
812.8
818.9
853.44
881.89
922.53
979.42
1020.06
1046.48
3048
* This size only available with polyester cord.

** The catalog number for this length belt is A 6 16 15C
2
3
4
5
6
7
8
9
10
11
12
13
14
15
2-21
16
I
R
MXL DOUBLE-SIDED BELTS 080" OR 2.03 mm PITCH

BELT WIDTHS
INCH - 1/8, 3/16, 1/4 & 3/8
METRIC - 3, 4.5, 6 & 9.5 mm
Inch
MATERIAL:
T
1
2
3
4
Body - Polyurethane
Cord - Kevlar
SPECIFICATIONS:
Breaking Strength:
Temperature Range:
MODIFICATIONS:
THEORETICAL PITCH
.080
(2.032)
40


BELT WIDTH
.020
(0.51)
5
.060
(1.52)
.030
(0.76)
7
8
INCH COMPONENT
CATALOG NUMBER
A 6B16-D
No. of
Grooves
Code
Belt Width
Inch
1/8
3/16
1/4
3/8
10
11
12
13
Width
Code
012
018
025
037
METRIC COMPONENT
CATALOG NUMBER
A 6B16MD
No. of
Grooves
Code
14
Belt Width
mm
3
4.5
6
9.5
15
16
.020
(0.51)
2-22
Width
Code
030
045
060
095
Pitch Length
Groove
Code
Inch
mm
132
136
145
150
155
160
165
170
175
180
185
190
195
200
212
236
250
265
300
315
355
400
475
500
10.56
10.88
11.60
12.00
12.40
12.80
13.20
13.60
14.00
14.40
14.80
15.20
15.60
16.00
16.96
18.88
20.00
21.20
24.00
25.20
28.40
32.00
38.00
40.00
268.22
276.35
294.64
304.8
314.96
325.12
335.28
345.44
355.6
365.76
375.92
386.08
396.24
406.4
430.78
479.55
508
538.48
609.6
640.08
721.36
812.8
965.2
1016
MXL PULLEY FLANGES .080" OR 2.03 mm & 40 D.P. PITCH

MATERIAL:
Aluminum Alloy
SPECIFICATION:
Inch
Priced Per 25 Pieces
T
1
2
3
4
I.D. O.D.
T
INCH COMPONENT
Catalog Number
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
Inch
Metric
W
Width
Pulley
Grooves
Ref.
I.D.
.003
O.D.
.015
I.D.
0.08
O.D.
0.4
.010
( 0.25)
10
11
12
13
14
15
16
18
20
21
22
24
25
26
28
30
32
33
34
35
36
38
40
42
44
45
48
50
54
60
.188
.214
.218
.244
.270
.296
.322
.374
.426
.452
.452
.504
.530
.556
.574
.626
.678
.704
.722
.748
.774
.826
.874
.926
.978
1.044
1.058
1.110
1.200
1.356
.425
.450
.480
.505
.530
.555
.580
.635
.685
.710
.740
.790
.815
.840
.895
.945
1.000
1.025
1.050
1.080
1.105
1.155
1.210
1.260
1.315
1.340
1.420
1.470
1.575
1.730
4.77
5.44
5.54
6.2
6.86
7.52
8.18
9.5
10.82
11.48
11.48
12.8
13.46
14.12
14.58
15.9
17.22
17.88
18.34
19
19.66
20.98
22.2
23.52
24.84
26.52
26.87
28.19
30.48
34.44
10.8
11.4
12.2
12.8
13.5
14.1
14.7
16.1
17.4
18
18.8
20.1
20.7
21.3
22.7
24
25.4
26
26.7
27.4
28.1
29.3
30.7
32
33.4
34
36.1
37.3
40
43.9
.045 (1.14)
.045 (1.14)
.045 (1.14)
.045 (1.14)
.045 (1.14)
.045 (1.14)
.045 (1.14)
.052 (1.32)
.052 (1.32)
.052 (1.32)
.052 (1.32)
.052 (1.32)
.052 (1.32)
.052 (1.32)
.052 (1.32)
.052 (1.32)
.052 (1.32)
.052 (1.32)
.052 (1.32)
.052 (1.32)
.052 (1.32)
.052 (1.32)
.060 (1.52)
.060 (1.52)
.060 (1.52)
.060 (1.52)
.060 (1.52)
.060 (1.52)
.060 (1.52)
.060 (1.52)
5-010FA
5-011FA
5-012FA
5-013FA
5-014FA
5-015FA
5-016FA
5-018FA
5-020FA
5-021FA
5-022FA
5-024FA
5-025FA
5-026FA
5-028FA
5-030FA
5-032FA
5-033FA
5-034FA
5-035FA
5-036FA
5-038FA
5-040FA
5-042FA
5-044FA
5-045FA
5-048FA
5-050FA
5-054FA
5-060FA
6
T
Thickness
.025 (0.64)
.025 (0.64)
.025 (0.64)
.025 (0.64)
.025 (0.64)
.025 (0.64)
.025 (0.64)
.032 (0.81)
.032 (0.81)
.032 (0.81)
.032 (0.81)
.032 (0.81)
.032 (0.81)
.032 (0.81)
.032 (0.81)
.032 (0.81)
.032 (0.81)
.032 (0.81)
.032 (0.81)
.032 (0.81)
.032 (0.81)
.032 (0.81)
.040 (1.02)
.040 (1.02)
.040 (1.02)
.040 (1.02)
.040 (1.02)
.040 (1.02)
.040 (1.02)
.040 (1.02)
2-23
7
8
9
10
11
12
13
14
15
16
MXL TIMING PULLEY STOCK .080" or 2.03 mm PITCH

MATERIAL:
Aluminum Alloy
Inch
T
1
2
3
4
5
6
7
8
9
10
11
12
13
O.D. C
INCH COMPONENT
Catalog Number
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
6A15-010MXL02
6A15-011MXL02
6A15-012MXL02
6A15-013MXL02
6A15-014MXL03
6A15-015MXL03
6A15-016MXL03
6A15-017MXL03
6A15-018MXL03
6A15-019MXL03
6A15-020MXL04
6A15-021MXL04
6A15-022MXL04
6A15-023MXL04
6A15-024MXL05
6A15-025MXL05
6A15-026MXL05
6A15-027MXL05
6A15-028MXL05
6A15-029MXL05
6A15-030MXL06
6A15-031MXL06
6A15-032MXL06
6A15-033MXL06
6A15-034MXL06
6A15-035MXL06
6A15-036MXL06
6A15-037MXL06
6A15-038MXL06
6A15-039MXL06
6A15-040MXL07
No.
of
Grooves
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
Inch
P.D.
.255
.280
.306
.331
.357
.382
.407
.433
.458
.484
.509
.535
.560
.586
.611
.637
.662
.687
.713
.738
.764
.789
.815
.840
.866
.891
.917
.942
.968
.993
1.019

Dimensions in [ ] may be substituted at SDP option.
14
15
16
2-24
Metric
O.D.
+.002
-.000
.235
.260
.286
.311
.337
.362
.387
.413
.438
.464
.489
.515
.540
.566
.591
.617
.642
.667
.693
.718
.744
.769
.795
.820
.846
.871
.897
.922
.948
.973
.999
P.D.
6.5
7.1
7.8
8.4
9.1
9.7
10.3
11
11.6
12.3
12.9
13.6
14.2
14.9
15.5
16.2
16.8
17.5
18.1
18.8
19.4
20.1
20.7
21.3
22
22.6
23.3
23.9
24.6
25.2
25.9
O.D.
+0.05
0
5.96
6.61
7.25
7.9
8.55
9.19
9.84
10.49
11.13
11.78
12.43
13.07
13.72
14.37
15.02
15.66
16.31
16.96
17.6
18.25
18.9
19.54
20.19
20.84
21.48
22.13
22.78
23.42
24.07
24.72
25.36
C
Shank
Dia.
E
Shank
Length
1 (25.4)
1 (25.4)
1 (25.4)
1/4 (6)
1 (25.4)
[3/8 (9.5)] 1 (25.4)
1 (25.4)
5/16 (8)
[7/16 (11.1)] 1 (25.4)
1 (25.4)
1 (25.4)
3/8 (9.5)
[1/2 (12.7)]
1 (25.4)
3/8 (9.5)
7/8 (22.3)
7/8 (22.3)
3/8 (9.5)
7/8 (22.3)
3/8 (9.5)
7/8 (22.3)
3/8 (9.5)
1/2 (12.7)
1/2 (12.7)
1/2 (12.7)
1/2 (12.7)
1/2 (12.7)
1/2 (12.7)
1/2 (12.7)
1
1/2 (12.7)
(25.4)
1/2 (12.7)
3/4
1/2 (12.7)
(19.1)
1/2 (12.7)
3/16-7/32 (5)
[5/16 (8)]
1/2 (12.7)
1/2 (12.7)
1/2 (12.7)
1/2 (12.7)
1/2 (12.7)
1/2 (12.7)
L
Minimum
Usable
Length
2 (50.8)
2 (50.8)
2 (50.8)
2 (50.8)
3 (76.2)
3 (76.2)
3 (76.2)
3 (76.2)
3 (76.2)
3 (76.2)
4 (101.6)
4 (101.6)
4 (101.6)
4 (101.6)
5 (127)
5 (127)
5 (127)
5 (127)
5 (127)
5 (127)
6 (152.4)
6 (152.4)
6 (152.4)
6 (152.4)
6 (152.4)
6 (152.4)
6 (152.4)
6 (152.4)
6 (152.4)
6 (152.4)
7 (177.8)
MXL TIMING PULLEY STOCK .080" or 2.03 mm PITCH

MATERIAL:
Aluminum Alloy
SPECIFICATIONS:
Inch
O.D. Tolerance:
From 42 to 75 grooves is +.003/-.000 (+0.06/0)
From 80 to 150 grooves is +.004/-.000 (+0.10/0)

1 (25.4)
[3/4 (19.1)]
O.D. C
INCH COMPONENT
Catalog Number
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
Metric
Inch
No.
of
Grooves
P.D.
O.D.
P.D.
O.D.
C
Shank
Dia.
42
44
45
48
49
50
51
52
54
55
56
57
60
64
65
66
70
72
75
80
82
84
88
90
96
98
100
102
108
110
120
130
140
150
1.070
1.120
1.146
1.222
1.248
1.273
1.299
1.324
1.375
1.401
1.426
1.451
1.528
1.630
1.655
1.681
1.783
1.833
1.910
2.037
2.088
2.139
2.241
2.292
2.445
2.496
2.546
2.597
2.750
2.801
3.056
3.310
3.565
3.820
1.050
1.100
1.126
1.202
1.228
1.253
1.279
1.304
1.355
1.381
1.406
1.431
1.508
1.610
1.635
1.661
1.763
1.813
1.890
2.017
2.068
2.119
2.221
2.272
2.425
2.476
2.526
2.577
2.730
2.781
3.036
3.290
3.545
3.800
27.2
28.5
29.1
31
31.7
32.3
33
33.6
34.9
35.6
36.2
36.9
38.8
41.4
42
42.7
45.3
46.6
48.5
51.7
53
54.3
56.9
58.2
62.1
63.4
64.7
66
69.9
71.1
77.6
84.1
90.6
97
26.66
27.95
28.6
30.54
31.19
31.83
32.48
33.13
34.42
35.07
35.71
36.36
38.3
40.89
41.53
42.18
44.77
46.06
48
51.24
52.53
53.82
56.41
57.7
61.59
62.88
64.17
65.47
69.35
70.64
77.11
83.58
90.04
96.51
1/2 (12.7)
1/2 (12.7)
1/2 (12.7)
1/2 (12.7)
1/2 (12.7)
1/2 (12.7)
1/2 (12.7)
1/2 (12.7)
1/2 (12.7)
1/2 (12.7)
1/2 (12.7)
1/2 (12.7)
1/2 (12.7)
1/2 (12.7)
1/2 (12.7)
1/2 (12.7)
1/2 (12.7)
1/2 (12.7)
1/2 (12.7)
3/4 (19.1)
3/4 (19.1)
3/4 (19.1)
3/4 (19.1)
3/4 (19.1)
3/4 (19.1)
3/4 (19.1)
3/4 (19.1)
3/4 (19.1)
3/4 (19.1)
3/4 (19.1)
3/4 (19.1)
3/4 (19.1)
3/4 (19.1)
3/4 (19.1)
6A15-042MXL07
6A15-044MXL07
6A15-045MXL07
6A15-048MXL07
6A15-049MXL07
6A15-050MXL07
6A15-051MXL07
6A15-052MXL07
6A15-054MXL07
6A15-055MXL07
6A15-056MXL07
6A15-057MXL07
6A15-060MXL08
6A15-064MXL08
6A15-065MXL08
6A15-066MXL08
6A15-070MXL08
6A15-072MXL08
6A15-075MXL08
6A15-080MXL08
6A15-082MXL08
6A15-084MXL08
6A15-088MXL08
6A15-090MXL08
6A15-096MXL08
6A15-098MXL08
6A15-100MXL08
6A15-102MXL08
6A15-108MXL08
6A15-110MXL08
6A15-120MXL08
6A15-130MXL08
6A15-140MXL08
6A15-150MXL08
L
Minimum
Usable
Length
7 (177.8)
7 (177.8)
7 (177.8)
7 (177.8)
7 (177.8)
7 (177.8)
7 (177.8)
7 (177.8)
7 (177.8)
7 (177.8)
7 (177.8)
7 (177.8)
8 (203.2)
8 (203.2)
8 (203.2)
8 (203.2)
8 (203.2)
8 (203.2)
8 (203.2)
8 (203.2)
8 (203.2)
8 (203.2)
8 (203.2)
8 (203.2)
8 (203.2)
8 (203.2)
8 (203.2)
8 (203.2)
8 (203.2)
8 (203.2)
8 (203.2)
8 (203.2)
8 (203.2)
8 (203.2)
4
5
6
7
8
9
10
11
12
13
14
15
2-25
16

R
Inch
0
HERES HOW IT WORKS:
2
3
4
5
6
7
8
9
10


13
14
15
16
HUB
FEATURES:

FRONT

11
12
SOLID HINGE
PORTION
TRANSVERSE
SLOT
RADIAL SLOT
BACK
Fairloc Hub Pulleys

Pitch
Page #
.080
1/5
3 mm HTD
5 mm HTD
2 mm GT2
3 mm GT2
2-27
2-76
2-121
2-147
2-167
2-185
Legend
Fastening Method
Clamps
Yes
No
No
Yes
No
*Fairloc
Yes
Yes
Yes
Yes
Yes
B Self-contained
Keys
No
No
No
No
No
Pins
No
No
No
No
Yes
D Easy adjustment
Set Screws
No
No
No
No
Yes
* Patented
2-26
MXL TIMING BELT PULLEYS .080" PITCH

FOR 1/4" BELTS
FAIRLOC HUB
DOUBLE OR NO FLANGE
R
Inch
MATERIAL:
Aluminum Alloy
FINISH:
Clear Anodized
SPECIFICATIONS:
O.D. Tolerance:
12 to 32 grooves is +.002 /-.000
36 to 72 grooves is +.003 /-.000
Other sizes available on special order.
CAP SCREW
CAP SCREW
F.D. O.D. B
3/8
CAP SCREW
D
F.D. O.D. B
.28
O.D. B
.28
Fig. 1
Fig. 2
Fig. 3
INCH COMPONENT
Fig. 1
A
A
A
A
A
A
A
A
A
A
A
Fig. 2
A
A
A
A
Fig. 3
A
A
B
Bore
C
E
W
Hub
Length
Body
Dia.
1/64
No.
of
Grooves
P.D.
6D16-012DF2504
6D16-015DF2506
6D16-016DF2506
6D16-018DF2508
6D16-020DF2508
6D16-022DF2508
6D16-024DF2508
6D16-025DF2508
6D16-028DF2508
6D16-030DF2508
6D16-032DF2508
12
15
16
18
20
22
24
25
28
30
32
.306
.382
.407
.458
.509
.560
.611
.637
.713
.764
.815
.286
.362
.387
.438
.489
.540
.591
.617
.693
.744
.795
.480
.555
.580
.635
.685
.740
.790
.815
.895
.945
1.000
.125
.1875
.1875
.250
.250
.250
.250
.250
.250
.250
.250
9/16
9/16
9/16
9/16
9/16
9/16
11/16
11/16
11/16
11/16
11/16
.480
.555
.580
.625
.625
.625
.625
.625
.625
.625
.625
15/64
15/64
15/64
15/64
15/64
15/64
11/32
11/32
11/32
11/32
11/32
#2-56
#2-56
#2-56
#2-56
#2-56
#2-56
#2-56
#2-56
#2-56
#2-56
#2-56
10
6D16-036DF2508
6D16-040DF2508
6D16-048DF2508
6D16-060DF2508
36
40
48
60
.917
1.019
1.222
1.528
.897
.999
1.202
1.508
1.105
1.210
1.420
1.730
.250
.250
.250
.250
.389
.405
.405
.405
11/16
23/32
23/32
23/32
.625
.750
.750
.750
19/64
5/16
5/16
5/16
#2-56
#4-40
#4-40
#4-40
13
6D16-060NF2508
6D16-072NF2508
60
72
1.528
1.833
1.508
1.813
.250
.250
3/4
3/4
.750
.750
3/8
3/8
#4-40
#4-40
Catalog Number
O.D.
F.D.
1/64
+.001
-.000
1/64
D
Cap
Hub Screw
Proj.
11
12
14
15
2-27
16
I
R
T

FOR BELTS UP TO 1/8" WIDE
LOW PROFILE
DOUBLE FLANGE
Inch
MATERIAL:
Aluminum Alloy
FINISH:
1
2
3
Clear Anodized
SPECIFICATIONS:
O.D. Tolerance:
10 to 40 grooves is +.002 /-.000
42 to 60 grooves is +.003 /-.000
Pulleys with 10 to 16 grooves have
1 set screw; others have 2 at 90.
SET
SCREW
S
F.D. O.D.
C B
B C
O.D. F.D.
.16
Fig. 1
INCH COMPONENT
7
8
9
10
11
12
13
Catalog Number
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
6N16-010DF1204
6N16-011DF1204
6N16-012DF1204
6N16-014DF1204
6N16-015DF1206
6N16-016DF1206
6N16-018DF1206
6N16-018DF1208
6N16-020DF1206
6N16-020DF1208
6N16-021DF1206
6N16-021DF1208
6N16-022DF1206
6N16-022DF1208
6N16-024DF1208
6N16-028DF1208
6N16-030DF1208
6N16-032DF1208
6N16-036DF1208
6N16-040DF1208
6N16-042DF1208
6N16-044DF1208
6N16-048DF1208
6N16-060DF1208
14
15
16
SET SCREW
.156
2-28
No.
Fig.
of
No. Grooves P.D.
1
1
1
1
1
1
2
1
2
1
2
1
2
1
2
2
2
2
2
2
2
2
2
2
10
11
12
14
15
16
18
18
20
20
21
21
22
22
24
28
30
32
36
40
42
44
48
60
.255
.280
.306
.357
.382
.407
.458
.458
.509
.509
.535
.535
.560
.560
.611
.713
.764
.815
.917
1.019
1.070
1.120
1.222
1.528
Fig. 2
C
B
E
D
Bore W Lgth. Hub Hub
O.D. F.D.
1/64 +.001 Body
Dia.
1/64 1/64 Proj.
-.000
.235
.260
.286
.337
.362
.387
.438
.438
.489
.489
.515
.515
.540
.540
.591
.693
.744
.795
.897
.999
1.050
1.100
1.202
1.508
.425
.450
.480
.530
.555
.580
.635
.635
.685
.685
.710
.710
.740
.740
.790
.895
.945
1.000
1.105
1.210
1.260
1.315
1.420
1.730
.125
.125
.125
.125
.1875
.1875
.1875
.250
.1875
.250
.1875
.250
.1875
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
.260
.260
.260
.260
.260
.260
.260
.260
.260
.276
.276
.276
.276
.276
7/16
7/16
7/16
7/16
7/16
7/16
31/64
7/16
31/64
7/16
31/64
7/16
31/64
7/16
33/64
33/64
33/64
33/64
33/64
17/32
17/32
17/32
17/32
17/32
.425
.450
.480
.530
.555
.580
.312
.635
.364
.685
.390
.710
.390
.740
.442
.494
.546
.598
.676
.754
.806
.858
.936
1.222
15/64
15/64
15/64
15/64
15/64
15/64
7/32
15/64
7/32
15/64
7/32
15/64
7/32
15/64
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
Set
S Screw
7/64
7/64
7/64
7/64
7/64
7/64
7/64
7/64
7/64
7/64
7/64
7/64
7/64
7/64
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
#4-40
#4-40
#4-40
#4-40
#4-40
#4-40
#4-40
#4-40
#4-40
#4-40
#4-40
#4-40
#4-40
#4-40
#6-40
#6-40
#6-40
#6-40
#6-40
#6-40
#6-40
#6-40
#6-40
#6-40

DOUBLE OR NO FLANGE
MATERIAL:
Inch
Aluminum Alloy
FINISH:
Clear Anodized
SPECIFICATIONS:
O.D. Tolerance:
10 to 40 grooves is +.002/-.000
42 to 72 grooves is +.003/-.000
80 to 120 grooves is +.004/-.000
Pulleys with 10 to 16 grooves

SET
SCREW
have 1 set screw; others
have 2 at 90.
D
.285
D
S
.38
S
F.D. O.D.
Fig. 1
SET
SCREW
Fig. 2
Fig. 3
SET
SCREW
C
B
E
D
W Lgth.
Hub Hub
O.D. F.D. Bore
1/64 +.001 Body
Dia.
1/64
Proj.
-.000
1/64
Set
Screw
7/64
7/64
7/64
7/64
7/64
7/64
7/64
7/64
7/64
7/64
7/64
7/64
7/64
7/64
7/64
5/32
5/32
5/32
5/32
5/32
5/32
5/32
5/32
5/32
5/32
5/32
#4-40
#4-40
#4-40
#4-40
#4-40
#6-40
#6-40
#6-40
#6-40
#6-40
#6-40
#6-40
#6-40
#6-40
#6-40
#6-40
#6-40
#6-40
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
Fig.
No.
P.D.
1
1
1
1
1
1
1
2
1
2
1
2
1
2
1
2
2
2
2
2
2
2
2
2
2
2
10
11
12
14
14
15
16
18
18
20
20
21
21
22
22
24
25
28
30
32
36
40
42
44
48
60
.255
.280
.306
.357
.357
.382
.407
.458
.458
.509
.509
.535
.535
.560
.560
.611
.637
.713
.764
.815
.917
1.019
1.070
1.120
1.222
1.528
.235
.260
.286
.337
.337
.362
.387
.438
.438
.489
.489
.515
.515
.540
.540
.591
.617
.693
.744
.795
.897
.999
1.050
1.100
1.202
1.508
.425
.450
.480
.530
.530
.555
.580
.635
.635
.685
.685
.710
.710
.740
.740
.790
.815
.895
.945
1.000
1.105
1.210
1.260
1.315
1.420
1.730
.125
.125
.125
.125
.1565
.1875
.1875
.1875
.250
.1875
.250
.1875
.250
.1875
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
.389
.389
.389
.389
.389
.389
.389
.389
.389
.389
.405
.405
.405
.405
.405
9/16
9/16
9/16
9/16
9/16
9/16
9/16
5/8
9/16
5/8
9/16
5/8
9/16
5/8
9/16
11/16
11/16
11/16
11/16
11/16
11/16
23/32
23/32
23/32
23/32
23/32
.425
.450
.480
.530
.530
.555
.580
.312
.635
.364
.685
.390
.710
.390
.740
.442
.468
.494
.546
.598
.676
.754
.806
.858
.936
1.222
15/64
15/64
15/64
15/64
15/64
15/64
15/64
15/64
15/64
15/64
15/64
15/64
15/64
15/64
19/64
19/64
19/64
19/64
19/64
19/64
19/64
5/16
5/16
5/16
5/16
5/16
3
3
3
3
3
3
60
72
80
90
100
120
1.528
1.833
2.037
2.292
2.546
3.056
1.508
1.813
2.017
2.272
2.526
3.036
.250
.250
.3125
.3125
.3125
.375
3/4
3/4
3/4
3/4
3/4
3/4
1.148
1.195
1.500
1.500
1.500
1.500
3/8
3/8
3/8
3/8
3/8
3/8
3/16 #8-32
3/16 #8-32
3/16 #8-32
3/16 #8-32
3/16 #8-32
3/16 #10-32
2-29
REV: 03.13.12 mh
B C
No. of
Grooves
Double Flange
A 6A16-010DF2504
A 6A16-011DF2504
A 6A16-012DF2504
A 6A16-014DF2504
A 6A16-014DF2505
A 6A16-015DF2506
A 6A16-016DF2506
A 6A16-018DF2506
A 6A16-018DF2508
A 6A16-020DF2506
A 6A16-020DF2508
A 6A16-021DF2506
A 6A16-021DF2508
A 6A16-022DF2506
A 6A16-022DF2508
A 6A16-024DF2508
A 6A16-025DF2508
A 6A16-028DF2508
A 6A16-030DF2508
A 6A16-032DF2508
A 6A16-036DF2508
A 6A16-040DF2508
A 6A16-042DF2508
A 6A16-044DF2508
A 6A16-048DF2508
A 6A16-060DF2508
No Flange
A 6A16-060NF2508
A 6A16-072NF2508
A 6A16-080NF2510
A 6A16-090NF2510
A 6A16-100NF2510
A 6A16-120NF2512
O.D.
.29
INCH COMPONENT
B C
O.D. F.D.
C B
Catalog Number
5
6
7
8
9
10
11
12
13
14
15
16
I
R


DOUBLE OR NO FLANGE
MATERIAL:
Inch
Aluminum Alloy
FINISH:
Clear Anodized
1
2
3
SPECIFICATIONS:
O.D. Tolerance:
10 to 40 grooves is +.002/-.000
42 to 72 grooves is +.003/-.000
80 to 120 grooves is +.004/-.000
SET
have 1 set screw; others
SCREW
have 2 at 90.
D
.41
F.D. O.D.
O.D.
8
9
10
11
12
13
14
15
16
Double Flange
A 6A16-010DF3704
A 6A16-011DF3704
A 6A16-012DF3704
A 6A16-014DF3704
A 6A16-015DF3706
A 6A16-016DF3706
A 6A16-018DF3706
A 6A16-018DF3708
A 6A16-020DF3706
A 6A16-020DF3708
A 6A16-021DF3706
A 6A16-021DF3708
A 6A16-022DF3706
A 6A16-022DF3708
A 6A16-024DF3708
A 6A16-025DF3708
A 6A16-028DF3708
A 6A16-030DF3708
A 6A16-032DF3708
A 6A16-036DF3708
A 6A16-040DF3708
A 6A16-042DF3708
A 6A16-044DF3708
A 6A16-048DF3708
A 6A16-060DF3708
No Flange
A 6A16-060NF3708
A 6A16-072NF3708
A 6A16-080NF3710
A 6A16-090NF3710
A 6A16-100NF3710
A 6A16-120NF3712
2-30
1
1
1
1
1
1
2
1
2
1
2
1
2
1
2
2
2
2
2
2
2
2
2
2
2
3
3
3
3
3
3
Fig. 2
Fig. 3
No. of
Grooves
Fig.
No.
S
B C
SET
SCREW
.41
Fig. 1
INCH COMPONENT
B C
O.D. F.D.
C B
Catalog Number
.500
D
S
P.D.
O.D.
C
E
D
W Lgth.
Hub Hub
1/64 +.001 Body
Dia.
1/64
Proj.
-.000
1/64
10
11
12
14
15
16
18
18
20
20
21
21
22
22
24
25
28
30
32
36
40
42
44
48
60
.255
.280
.306
.357
.382
.407
.458
.458
.509
.509
.535
.535
.560
.560
.611
.637
.713
.764
.815
.917
1.019
1.070
1.120
1.222
1.528
.235
.260
.286
.337
.362
.387
.438
.438
.489
.489
.515
.515
.540
.540
.591
.617
.693
.744
.795
.897
.999
1.050
1.100
1.202
1.508
.425
.450
.480
.530
.555
.580
.635
.635
.685
.685
.710
.710
.740
.740
.790
.815
.895
.945
1.000
1.105
1.210
1.260
1.315
1.420
1.730
.125
.125
.125
.125
.1875
.1875
.1875
.250
.1875
.250
.250
.250
.1875
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
.514
.514
.514
.514
.514
.514
.514
.514
.514
.514
.530
.530
.530
.530
.530
11/16
11/16
11/16
11/16
11/16
11/16
3/4
11/16
3/4
11/16
3/4
11/16
3/4
11/16
13/16
13/16
13/16
13/16
13/16
13/16
27/32
27/32
27/32
27/32
27/32
.425
.450
.480
.530
.555
.580
.312
.635
.364
.685
.390
.710
.390
.740
.442
.468
.494
.546
.598
.676
.754
.806
.858
.936
1.222
15/64
15/64
15/64
15/64
15/64
15/64
15/64
15/64
15/64
15/64
15/64
15/64
15/64
19/64
19/64
19/64
19/64
19/64
19/64
19/64
5/16
5/16
5/16
5/16
5/16
60
72
80
90
100
120
1.528
1.833
2.037
2.292
2.546
3.056
1.508
1.813
2.017
2.272
2.526
3.036
.250
.250
.3125
.3125
.3125
.375
7/8
7/8
7/8
7/8
7/8
7/8
1.148
1.195
1.500
1.500
1.500
1.500
3/8
3/8
3/8
3/8
3/8
3/8
B
F.D. Bore
SET
SCREW
Set
Screw
7/64
7/64
7/64
7/64
7/64
7/64
7/64
7/64
7/64
7/64
7/64
7/64
7/64
7/64
5/32
5/32
5/32
5/32
5/32
5/32
5/32
5/32
5/32
5/32
5/32
#4-40
#4-40
#4-40
#4-40
#6-40
#6-40
#6-40
#6-40
#6-40
#6-40
#6-40
#6-40
#6-40
#6-40
#6-40
#6-40
#6-40
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
3/16 #8-32
3/16 #8-32
3/16 #8-32
3/16 #8-32
3/16 #8-32
3/16 #10-32

FOR 1/4" BELTS
MOLDED WITH METAL HUB
SINGLE OR DOUBLE FLANGE
R
Inch
MATERIAL:
Pulley - Polycarbonate, Fiberglass Reinforced

Insert - Aluminum, Knurled, Clear Anodized
SPECIFICATION:
T
1

do not have webs.
2
11/16
11/64
.090 WEB
5/32
11/16
11/64
.090 WEB
1/8
SUB DRILL
5/32
1/8
SUB DRILL
F.D. O.D. 5/16
B 1/2
B 1/2
F.D. O.D. 5/16
#6-32 SET SCREW
#6-32 SET SCREW
5/16
1/4
1/16 (TYP)
5/16
1/4
1/16
Fig. 1
Fig. 1
Single Flange
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
6T16-018SF2506
6T16-018SF2508
6T16-020SF2506
6T16-020SF2508
6T16-021SF2506
6T16-021SF2508
6T16-022SF2506
6T16-022SF2508
6T16-024SF2506
6T16-024SF2508
6T16-026SF2506
6T16-026SF2508
6T16-028SF2506
6T16-028SF2508
6T16-030SF2506
6T16-030SF2508
6T16-032SF2506
6T16-032SF2508
6T16-036SF2506
6T16-036SF2508
6T16-040SF2506
6T16-040SF2508
6T16-042SF2506
6T16-042SF2508
6T16-044SF2506
6T16-044SF2508
Fig. 2
Double Flange
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
6T16-018DF2506
6T16-018DF2508
6T16-020DF2506
6T16-020DF2508
6T16-021DF2506
6T16-021DF2508
6T16-022DF2506
6T16-022DF2508
6T16-024DF2506
6T16-024DF2508
6T16-026DF2506
6T16-026DF2508
6T16-028DF2506
6T16-028DF2508
6T16-030DF2506
6T16-030DF2508
6T16-032DF2506
6T16-032DF2508
6T16-036DF2506
6T16-036DF2508
6T16-040DF2506
6T16-040DF2508
6T16-042DF2506
6T16-042DF2508
6T16-044DF2506
6T16-044DF2508
5
6
Fig. 2
INCH COMPONENT
Catalog Number
No.
of
Grooves
P.D.
O.D.
F.D.
B
Bore
18
18
20
20
21
21
22
22
24
24
26
26
28
28
30
30
32
32
36
36
40
40
42
42
44
44
.458
.458
.509
.509
.535
.535
.560
.560
.611
.611
.662
.662
.713
.713
.764
.764
.815
.815
.917
.917
1.019
1.019
1.070
1.070
1.120
1.120
.438
.438
.489
.489
.515
.515
.540
.540
.591
.591
.642
.642
.693
.693
.744
.744
.795
.795
.897
.897
.999
.999
1.050
1.050
1.100
1.100
.63
.63
.68
.68
.70
.70
.73
.73
.78
.78
.83
.83
.88
.88
.93
.93
.98
.98
1.09
1.09
1.19
1.19
1.24
1.24
1.29
1.29
.1875
.250
.1875
.250
.1875
.250
.1875
.250
.1875
.250
.1875
.250
.1875
.250
.1875
.250
.1875
.250
.1875
.250
.1875
.250
.1875
.250
.1875
.250
+.001
-.000
2-31
8
9
10
11
12
13
14
15
16
I
R
T
1
2
3
MXL TIMING BELT PULLEYS .080 PITCH

FOR 1/4" BELTS
MOLDED WITH INSERT
Inch
MATERIAL:

Insert - Brass, Knurled
SPECIFICATIONS:

do not have webs.
Pulleys with:
Bore Set Screw & Spot Drill
.1875
#4-40
.250
#6-32
.3125
#8-32
11/16
9/64
SET SCREW
B 7/16 11/16
F.D. O.D.
11/16
11/64
.090 WEB
5/32
11/64
.090 WEB
5/32
9/64
SET SCREW
B 7/16 11/16
F.D. O.D.
SPOT DRILL
SPOT DRILL
1/16
5
INCH COMPONENT
6
7
8
9
10
11
12
13
14
15
16
1/4
Catalog Number
Fig. 1
Single Flange
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
6Z16-036SF2506
6Z16-036SF2508
6Z16-036SF2510
6Z16-040SF2506
6Z16-040SF2508
6Z16-040SF2510
6Z16-042SF2506
6Z16-042SF2508
6Z16-042SF2510
6Z16-044SF2506
6Z16-044SF2508
6Z16-044SF2510
6Z16-048SF2506
6Z16-048SF2508
6Z16-048SF2510
6Z16-060SF2508
6Z16-060SF2510
6Z16-065SF2508
6Z16-065SF2510
6Z16-072SF2508
6Z16-072SF2510
6Z16-080SF2508
6Z16-080SF2510
6Z16-090SF2508
6Z16-090SF2510
6Z16-100SF2508
6Z16-100SF2510
6Z16-110SF2508
6Z16-110SF2510
6Z16-120SF2508
6Z16-120SF2510
6Z16-130SF2508
6Z16-130SF2510
2-32
Fig. 2
Double Flange
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
6Z16-036DF2506
6Z16-036DF2508
6Z16-036DF2510
6Z16-040DF2506
6Z16-040DF2508
6Z16-040DF2510
6Z16-042DF2506
6Z16-042DF2508
6Z16-042DF2510
6Z16-044DF2506
6Z16-044DF2508
6Z16-044DF2510
6Z16-048DF2506
6Z16-048DF2508
6Z16-048DF2510
6Z16-060DF2508
6Z16-060DF2510
6Z16-065DF2508
6Z16-065DF2510
6Z16-072DF2508
6Z16-072DF2510
6Z16-080DF2508
6Z16-080DF2510
6Z16-090DF2508
6Z16-090DF2510
6Z16-100DF2508
6Z16-100DF2510
6Z16-110DF2508
6Z16-110DF2510
6Z16-120DF2508
6Z16-120DF2510
6Z16-130DF2508
6Z16-130DF2510
1/4
1/16
5/16
5/16
Fig. 2
Fig. 1
No.
of
Grooves
P.D.
O.D.
F.D.
B
Bore
36
36
36
40
40
40
42
42
42
44
44
44
48
48
48
60
60
65
65
72
72
80
80
90
90
100
100
110
110
120
120
130
130
.917
.917
.917
1.019
1.019
1.019
1.070
1.070
1.070
1.120
1.120
1.120
1.222
1.222
1.222
1.528
1.528
1.655
1.655
1.833
1.833
2.037
2.037
2.292
2.292
2.546
2.546
2.801
2.801
3.056
3.056
3.310
3.310
.897
.897
.897
.999
.999
.999
1.050
1.050
1.050
1.100
1.100
1.100
1.202
1.202
1.202
1.508
1.508
1.635
1.635
1.813
1.813
2.017
2.017
2.272
2.272
2.526
2.526
2.781
2.781
3.036
3.036
3.290
3.290
1.09
1.09
1.09
1.19
1.19
1.19
1.24
1.24
1.24
1.29
1.29
1.29
1.39
1.39
1.39
1.70
1.70
1.82
1.82
2.00
2.00
2.21
2.21
2.46
2.46
2.71
2.71
2.97
2.97
3.22
3.22
3.48
3.48
.1875
.250
.3125
.1875
.250
.3125
.1875
.250
.3125
.1875
.250
.3125
.1875
.250
.3125
.250
.3125
.250
.3125
.250
.3125
.250
.3125
.250
.3125
.250
.3125
.250
.3125
.250
.3125
.250
.3125
+.001
-.000
MXL TIMING BELT PULLEYS .080 PITCH

FOR 1/4" BELTS
MOLDED
R
Inch
MATERIAL:
Polycarbonate, Fiberglass Reinforced
SPECIFICATION:

do not have webs.
Also available with set screws

or pinning holes on special order.
11/16 1/64
1/4
.090 WEB
F.D. O.D.
11/16 1/64
1/4
.090 WEB
F.D. O.D.
1/16 (TYP)
1/16
5/16
5/16
Fig. 2
Fig. 1
INCH COMPONENT
Catalog Number
Fig. 1
Single Flange
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
6M16-010SF2503
6M16-011SF2503
6M16-012SF2503
6M16-014SF2504
6M16-015SF2504
6M16-016SF2504
6M16-018SF2506
6M16-020SF2506
6M16-021SF2506
6M16-022SF2506
6M16-024SF2506
6M16-026SF2508
6M16-028SF2508
6M16-030SF2508
6M16-032SF2508
6M16-036SF2508
6M16-040SF2508
6M16-042SF2508
6M16-044SF2508
6M16-048SF2508
6M16-060SF2508
6M16-065SF2510
6M16-072SF2510
6M16-080SF2510
6M16-090SF2510
6M16-100SF2510
6M16-110SF2510
6M16-120SF2510
6M16-130SF2510
Fig. 2
Double Flange
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
6M16-010DF2503
6M16-011DF2503
6M16-012DF2503
6M16-014DF2504
6M16-015DF2504
6M16-016DF2504
6M16-018DF2506
6M16-020DF2506
6M16-021DF2506
6M16-022DF2506
6M16-024DF2506
6M16-026DF2508
6M16-028DF2508
6M16-030DF2508
6M16-032DF2508
6M16-036DF2508
6M16-040DF2508
6M16-042DF2508
6M16-044DF2508
6M16-048DF2508
6M16-060DF2508
6M16-065DF2510
6M16-072DF2510
6M16-080DF2510
6M16-090DF2510
6M16-100DF2510
6M16-110DF2510
6M16-120DF2510
6M16-130DF2510
No.
of
Grooves
P.D.
O.D.
F.D.
B
Bore
+.001
-.000
C
Hub
Dia.
10
11
12
14
15
16
18
20
21
22
24
26
28
30
32
36
40
42
44
48
60
65
72
80
90
100
110
120
130
.255
.280
.306
.357
.382
.407
.458
.509
.535
.560
.611
.662
.713
.764
.815
.917
1.019
1.070
1.120
1.222
1.528
1.655
1.833
2.037
2.292
2.546
2.801
3.056
3.310
.235
.260
.286
.337
.362
.387
.438
.489
.515
.540
.591
.642
.693
.744
.795
.897
.999
1.050
1.100
1.202
1.508
1.635
1.813
2.017
2.272
2.526
2.781
3.036
3.290
.42
.45
.47
.53
.55
.58
.63
.68
.70
.73
.78
.83
.88
.93
.98
1.09
1.19
1.24
1.29
1.39
1.70
1.82
2.00
2.21
2.46
2.71
2.97
3.22
3.48
.0937
.0937
.0937
.125
.125
.125
.1875
.1875
.1875
.1875
.1875
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
.3125
.3125
.3125
.3125
.3125
.3125
.3125
.3125
7/16
7/16
7/16
7/16
7/16
7/16
1/2
1/2
1/2
1/2
1/2
11/16
11/16
11/16
11/16
11/16
11/16
11/16
11/16
11/16
11/16
11/16
11/16
11/16
11/16
11/16
11/16
11/16
11/16
2-33
7
8
9
10
11
12
13
14
15
16
I
R
T
1

FOR 1/4" BELTS
MOLDED
HUBLESS
Inch
MATERIAL:
SPECIFICATION:

do not have webs.
2
E
.090 WEB
F.D. O.D.
.090 WEB
F.D. O.D.
.3125 +.001
-.000
5
6
SEE NOTE *
7
8
9
10
11
12
13
14
Fig. 1 Single Flange

A 6M16-018SF25
A 6M16-020SF25
A 6M16-021SF25
A 6M16-022SF25
A 6M16-024SF25
A 6M16-026SF25
A 6M16-028SF25
A 6M16-030SF25
A 6M16-032SF25
A 6M16-036SF25
A 6M16-040SF25
A 6M16-042SF25
A 6M16-044SF25
Fig. 2 Double Flange
A 6M16-018DF25
A 6M16-020DF25
A 6M16-021DF25
A 6M16-022DF25
A 6M16-024DF25
A 6M16-026DF25
A 6M16-028DF25
A 6M16-030DF25
A 6M16-032DF25
A 6M16-036DF25
A 6M16-040DF25
A 6M16-042DF25
A 6M16-044DF25
* No step (see Figure 1)
15
16
2-34
1/16 (TYP)
5/16
Fig. 2
Fig. 1
INCH COMPONENT
Catalog Number
1/16
5/16
.3125 +.001
-.000
No.
of
Grooves
P.D.
O.D.
F.D.
E
Length
C
Dia.
18
20
21
22
24
26
28
30
32
36
40
42
44
.458
.509
.535
.560
.611
.662
.713
.764
.815
.917
1.019
1.070
1.120
.438
.489
.515
.540
.591
.642
.693
.744
.795
.897
.999
1.050
1.100
.63
.68
.70
.73
.78
.83
.88
.93
.98
1.09
1.19
1.24
1.29
3/8 *
3/8 *
7/16
7/16
7/16
7/16
7/16
7/16
7/16
7/16
7/16
7/16
7/16
Solid
Solid
Solid
Solid
Solid
Solid
Solid
Solid
Solid
Solid
Solid
11/16
11/16
18
20
21
22
24
26
28
30
32
36
40
42
44
.458
.509
.535
.560
.611
.662
.713
.764
.815
.917
1.019
1.070
1.120
.438
.489
.515
.540
.591
.642
.693
.744
.795
.897
.999
1.050
1.100
.63
.68
.70
.73
.78
.83
.88
.93
.98
1.09
1.19
1.24
1.29
7/16
7/16
7/16
7/16
7/16
7/16
7/16
7/16
7/16
7/16
7/16
7/16
7/16
Solid
Solid
Solid
Solid
Solid
Solid
Solid
Solid
Solid
Solid
Solid
11/16
11/16
TIMING BELTS 40 D.P. OR 2.07 mm PITCH

BELT WIDTHS
INCH - 1/8, 3/16, 1/4, 5/16 & 3/8
METRIC - 3, 4.5, 6 & 8 mm
R
Inch
MATERIAL:
Polyurethane Elastomer Reinforced with Polyester Cord
SPECIFICATIONS:
Breaking Strength:
Temperature Range:
0F to +150F (-18C to +66C)
1
2
THEORETICAL PITCH
MODIFICATIONS:
.007 R
(0.2 R)
TYP


.0816
(2.073)
.024
(0.6)
3
.018
(0.46)
.048
(1.2)
BELT WIDTH
60
INCH COMPONENT
CATALOG NUMBER
A 6R 6No. of
Grooves
Code
Belt Width
Inch
1/8
3/16
1/4
5/16
Width
Code
0120
0180
0250
0310
METRIC COMPONENT
CATALOG NUMBER
A 6R 6M
No. of
Grooves
Code
Belt Width
mm
3
4.5
6
8
Width
Code
0300
0450
0600
0800
Groove
Code
Pitch Length
Inch
mm
030
62.18
2.448
033
2.693
68.4
035
72.54
2.856
040
82.91
3.264
044
91.2
3.590
045
93.27
3.672
99.49
3.917
* 048
050
103.63
4.080
051
105.71
4.162
052
4.243
107.78
053
109.85
4.325
055
114
4.488
056
116.07
4.570
057
118.14
4.651
058
4.733
120.21
060
4.896
124.36
061
126.43
4.978
064
132.65
5.222
065
134.72
5.304
138.87
5.467
* 067
069
143.01
5.630
070
5.712
145.08
071
5.794
147.16
072
149.23
5.875
073
151.3
5.957
074
6.038
153.38
075
155.45
6.120
076
6.202
157.52
* To be discontinued when
present stock is depleted.
Groove
Code
Pitch Length
Inch
mm
080
165.81
6.528
081
167.88
6.610
085
176.17
6.936
089
184.46
7.262
090
186.54
7.344
091
188.61
7.426
094
194.83
7.670
095
7.752
196.9
096
198.97
7.834
097
201.05
7.915
098
7.997
203.12
100
207.26
8.160
102
211.41
8.323
105
217.63
8.568
109
225.92
8.894
110
227.99
8.976
115
9.384
238.35
116
240.43
9.466
118
244.57
9.629
119
246.64
9.710
120
248.72
9.792
122
252.86
9.955
123
10.037
254.93
125
10.200
259.08
130
269.44
10.608
131
271.52
10.690
132
10.771
273.59
135
11.016
279.81
6
7
8
9
10
11
12
13
14
15
2-35
16

R
Inch
1
2
INCH COMPONENT
CATALOG NUMBER
A 6R 6-
No. of
Grooves
Code
Belt Width
Inch
1/8
3/16
1/4
5/16
5
6
7
8
9
METRIC COMPONENT
CATALOG NUMBER
A 6R 6M
No. of
Grooves
Code
Belt Width
mm
3
4.5
6
8
10
11
12
Width
Code
0300
0450
0600
0800
Inch
139
140
143
144
145
147
149
150
151
152
153
154
155
159
160
162
163
165
170
175
178
180
185
190
192
193
195
200
205
208
210
214
215
220
225
230
11.342
11.424
11.669
11.750
11.832
11.995
12.158
12.240
12.322
12.403
12.485
12.566
12.648
12.974
13.056
13.219
13.301
13.464
13.872
14.280
14.525
14.688
15.096
15.504
15.667
15.749
15.912
16.320
16.728
16.973
17.136
17.462
17.544
17.952
18.360
18.768
Pitch Length
mm
Groove
Code
Inch
mm
288.1
290.17
296.39
298.46
300.53
304.68
308.82
310.9
312.97
315.04
317.11
319.19
321.26
329.55
331.62
335.77
337.84
341.99
352.35
362.71
368.93
373.08
383.44
393.8
397.95
400.02
404.16
414.53
424.89
431.11
435.25
443.54
445.62
455.98
466.34
476.71
235
240
245
250
252
255
257
258
260
264
265
270
275
280
281
285
290
295
300
310
320
324
330
340
350
360
369
370
380
390
392
400
423
* 436
472
535
19.176
19.584
19.992
20.400
20.563
20.808
20.971
21.053
21.216
21.542
21.624
22.032
22.440
22.848
22.930
23.256
23.664
24.072
24.480
25.296
26.112
26.438
26.928
27.744
28.560
29.376
30.110
30.192
31.008
31.824
31.987
32.640
34.517
35.578
38.515
43.656
487.07
497.43
507.8
518.16
522.31
528.52
532.67
534.74
538.89
547.18
549.25
559.61
569.98
580.34
582.41
590.7
601.07
611.43
621.79
642.52
663.24
671.54
683.97
704.7
725.42
746.15
764.8
766.88
787.6
808.33
812.47
829.06
876.73
903.67
978.29
1108.86

13
14
15
16
Width
Code
0120
0180
0250
0310
Pitch Length
Groove
Code
2-36

BELT WIDTHS
INCH - 1/8, 3/16, 1/4 & 5/16
METRIC - 3, 4.5, 6 & 8 mm
R
Inch
MATERIAL:
Body - Polyurethane
Cord - Polyester Balanced Construction or Kevlar
SPECIFICATIONS:
Breaking Strength:
Polyester:
Kevlar:
Temperature Range:
Continuous: 0F to +180F (-18C to +82C)
2
THEORETICAL PITCH
.048
(1.2)
.007 R
(0.2 R)
TYP
BELT WIDTH
No. of
Grooves
Code
Width
Code
012
018
025
031
No. of
Grooves
Code
Belt Width
mm
3
4.5
6
8
5
6
METRIC COMPONENT
CATALOG NUMBER
A 6
6M
Polyester Cord G
Kevlar Cord
B
INCH COMPONENT
CATALOG NUMBER
A 6
6-
Belt Width
Inch
1/8
3/16
1/4
5/16
3
.018
(0.46)
60

Polyester Cord G
Kevlar Cord
B
.0816
(2.073)
.024
(0.6)
MODIFICATIONS:
Width
Code
030
045
060
080
Groove
Code
Pitch Length
Inch
mm
62.18
2.448
030
2.693
68.4
033
72.54
2.856
035
82.91
3.264
040
91.2
3.590
044
93.27
3.672
045
* 048
3.917
99.49
103.63
4.080
050
105.71
4.162
051
107.78
4.243
052
109.85
4.325
053
114
4.488
055
4.570
116.07
056
118.14
4.651
057
120.21
4.733
058
124.36
4.896
060
126.43
4.978
061
5.222
132.65
064
5.304
134.72
065
143.01
5.630
069
5.712
145.08
070
147.16
5.794
071
149.23
5.875
072
5.957
151.3
073
6.038
153.38
074
6.120
155.45
075
157.52
6.202
076
159.59
6.283
077
* To be discontinued when present
stock is depleted.
Groove
Code
Pitch Length
Inch
mm
* 078
6.365
161.67
6.528
080
165.81
6.610
081
167.88
6.854
084
174.1
6.936
085
176.17
7.262
089
184.46
7.344
090
186.54
7.426
091
188.61
7.670
094
194.83
7.752
095
196.9
7.834
096
198.97
7.915
097
201.05
7.997
098
203.12
8.160
100
207.26
8.323
102
211.41
8.568
105
217.63
8.894
109
225.92
8.976
110
227.99
9.302
114
236.28
9.384
115
238.35
9.466
116
240.43
9.629
118
244.57
9.710
119
246.64
9.792
120
248.72
9.955
122
252.86
10.037
123
254.93
10.200
125
259.08
10.608
130
269.44
2-37
8
9
10
11
12
13
14
15
16

R
Inch
T
1
2
INCH COMPONENT
CATALOG NUMBER
A 6
6Polyester Cord G
Kevlar Cord
B
Belt Width
Inch
1/8
3/16
1/4
5/16
3
4
5
6
7
Width
Code
012
018
025
031
METRIC COMPONENT
CATALOG NUMBER
A 6
6M
Polyester Cord G
Kevlar Cord
B
No. of
Grooves
Code
Belt Width
mm
3
4.5
6
8
8
9
10
11
12
13
14
15
16
No. of
Grooves
Code
2-38
Width
Code
030
045
060
080
Pitch Length
Groove
Code
Inch
mm
131
132
135
139
140
143
144
145
147
149
150
151
152
153
154
155
159
160
162
163
165
170
175
178
180
185
190
192
193
195
200
205
208
210
214
215
220
222
225
230
10.690
10.771
11.016
11.342
11.424
11.669
11.750
11.832
11.995
12.158
12.240
12.322
12.403
12.485
12.566
12.648
12.974
13.056
13.219
13.301
13.464
13.872
14.280
14.525
14.688
15.096
15.504
15.667
15.749
15.912
16.320
16.728
16.973
17.136
17.462
17.544
17.952
18.115
18.360
18.768
271.52
273.59
279.81
288.1
290.17
296.39
298.46
300.53
304.68
308.82
310.9
312.97
315.04
317.11
319.19
321.26
329.55
331.62
335.77
337.84
341.99
352.35
362.71
368.93
373.08
383.44
393.8
397.95
400.02
404.16
414.53
424.89
431.11
435.25
443.54
445.62
455.98
460.13
466.34
476.71
Groove
Code
1
Pitch Length
Inch
mm
235
19.176
487.07
240
19.584
497.43
245
19.992
507.8
250
20.400
518.16
251
20.482
520.23
252
20.563
522.31
255
20.808
528.52
256
20.890
530.6
257
20.971
532.67
258
21.053
534.74
260
21.216
538.89
264
21.542
547.18
265
21.624
549.25
270
22.032
559.61
275
22.440
569.98
280
22.848
580.34
281
22.930
582.41
285
23.256
590.7
290
23.664
601.07
295
24.072
611.43
300
24.480
621.79
310
25.296
642.52
320
26.112
663.24
324
26.438
671.54
330
26.928
683.97
340
27.744
704.7
350
28.560
725.42
360
29.376
746.15
369
30.110
764.8
370
30.192
766.88
380
31.008
787.6
390
31.824
808.33
392
31.987
812.47
400
32.640
829.06
408
33.293
845.64
423
34.517
876.73
436
35.578
903.67
472
38.515
978.29
535
43.656 1108.86
MXL PULLEY FLANGES .080" OR 2.03 mm & 40 D.P. PITCH

MATERIAL:
Aluminum Alloy
SPECIFICATION:
Inch
T
1
2
3
4
I.D. O.D.
T
INCH COMPONENT
Catalog Number
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
Inch
Metric
W
Width
Pulley
Grooves
Ref.
I.D.
.003
O.D.
.015
I.D.
0.08
O.D.
0.4
.010
( 0.25)
10
11
12
13
14
15
16
18
20
21
22
24
25
26
28
30
32
33
34
35
36
38
40
42
44
45
48
50
54
60
.188
.214
.218
.244
.270
.296
.322
.374
.426
.452
.452
.504
.530
.556
.574
.626
.678
.704
.722
.748
.774
.826
.874
.926
.978
1.044
1.058
1.110
1.200
1.356
.425
.450
.480
.505
.530
.555
.580
.635
.685
.710
.740
.790
.815
.840
.895
.945
1.000
1.025
1.050
1.080
1.105
1.155
1.210
1.260
1.315
1.340
1.420
1.470
1.575
1.730
4.77
5.44
5.54
6.2
6.86
7.52
8.18
9.5
10.82
11.48
11.48
12.8
13.46
14.12
14.58
15.9
17.22
17.88
18.34
19
19.66
20.98
22.2
23.52
24.84
26.52
26.87
28.19
30.48
34.44
10.8
11.4
12.2
12.8
13.5
14.1
14.7
16.1
17.4
18
18.8
20.1
20.7
21.3
22.7
24
25.4
26
26.7
27.4
28.1
29.3
30.7
32
33.4
34
36.1
37.3
40
43.9
.045 (1.14)
.045 (1.14)
.045 (1.14)
.045 (1.14)
.045 (1.14)
.045 (1.14)
.045 (1.14)
.052 (1.32)
.052 (1.32)
.052 (1.32)
.052 (1.32)
.052 (1.32)
.052 (1.32)
.052 (1.32)
.052 (1.32)
.052 (1.32)
.052 (1.32)
.052 (1.32)
.052 (1.32)
.052 (1.32)
.052 (1.32)
.052 (1.32)
.060 (1.52)
.060 (1.52)
.060 (1.52)
.060 (1.52)
.060 (1.52)
.060 (1.52)
.060 (1.52)
.060 (1.52)
5-010FA
5-011FA
5-012FA
5-013FA
5-014FA
5-015FA
5-016FA
5-018FA
5-020FA
5-021FA
5-022FA
5-024FA
5-025FA
5-026FA
5-028FA
5-030FA
5-032FA
5-033FA
5-034FA
5-035FA
5-036FA
5-038FA
5-040FA
5-042FA
5-044FA
5-045FA
5-048FA
5-050FA
5-054FA
5-060FA
T
Thickness
.025 (0.64)
.025 (0.64)
.025 (0.64)
.025 (0.64)
.025 (0.64)
.025 (0.64)
.025 (0.64)
.032 (0.81)
.032 (0.81)
.032 (0.81)
.032 (0.81)
.032 (0.81)
.032 (0.81)
.032 (0.81)
.032 (0.81)
.032 (0.81)
.032 (0.81)
.032 (0.81)
.032 (0.81)
.032 (0.81)
.032 (0.81)
.032 (0.81)
.040 (1.02)
.040 (1.02)
.040 (1.02)
.040 (1.02)
.040 (1.02)
.040 (1.02)
.040 (1.02)
.040 (1.02)
6
7
8
9
10
11
12
13
14
15
2-39
16
TIMING PULLEY STOCK 40 D.P.

ALSO FOR 2.07 mm PITCH PULLEYS
MATERIAL:
Inch
Aluminum Alloy
T
1
2
3
4
5
6
7
8
9
10
11
12
O.D. C
INCH COMPONENT
Catalog Number
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
5-010LT
5-011LT
5-012LT
5-013LT
5-014LT
5-015LT
5-016LT
5-017LT
5-018LT
5-019LT
5-020LT
5-021LT
5-022LT
5-023LT
5-024LT
5-025LT
5-026LT
5-027LT
5-028LT
5-029LT
5-030LT
5-031LT
5-032LT
5-033LT
5-034LT
5-035LT
5-036LT
5-038LT
5-039LT
No.
of
Grooves
P.D.
+.000
-.003
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
38
39
.260
.286
.312
.338
.364
.390
.416
.442
.468
.494
.520
.546
.572
.598
.624
.650
.676
.702
.728
.754
.780
.806
.832
.858
.884
.910
.936
.988
1.014
.246
.272
.298
.324
.350
.376
.402
.428
.454
.480
.506
.532
.558
.584
.610
.636
.662
.688
.714
.740
.766
.792
.818
.844
.870
.896
.922
.974
1.000
13
14
15
16
2-40
O.D.
C
Shank
Dia.
3/16 - 7/32
[5/16]
1/4
[3/8]
5/16
[7/16]
3/8
[1/2]
3/8
3/8
3/8
3/8
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
E
Shank
Length
1
1
1
1
1
1
1
1
1
1
7/8
7/8
7/8
7/8
1
[3/4]
L
Minimum
Usable
Length
2
2
2
2
3
3
3
3
3
3
4
4
4
4
5
5
5
5
5
5
6
6
6
6
6
6
6
6
6
TIMING PULLEY STOCK 40 D.P.

ALSO FOR 2.07 mm PITCH PULLEYS
MATERIAL:
Inch
Aluminum Alloy
1
[3/4]
O.D. C
INCH COMPONENT
Catalog Number
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
5-040LT
5-042LT
5-044LT
5-045LT
5-048LT
5-050LT
5-051LT
5-054LT
5-055LT
5-056LT
5-057LT
5-060LT
5-064LT
5-065LT
5-066LT
5-070LT
5-072LT
5-075LT
5-080LT
5-082LT
5-084LT
5-088LT
5-090LT
5-096LT
5-098LT
5-100LT
5-102LT
5-108LT
5-110LT
5-120LT
5-130LT
5-140LT
5-150LT
No.
of
Grooves
P.D.
+.000
-.003
O.D.
C
Shank
Dia.
L
Minimum
Usable
Length
40
42
44
45
48
50
51
54
55
56
57
60
64
65
66
70
72
75
80
82
84
88
90
96
98
100
102
108
110
120
130
140
150
1.040
1.092
1.144
1.170
1.248
1.300
1.326
1.404
1.430
1.456
1.482
1.560
1.664
1.690
1.716
1.820
1.872
1.950
2.080
2.132
2.184
2.288
2.340
2.496
2.548
2.600
2.652
2.808
2.860
3.120
3.380
3.640
3.900
1.026
1.078
1.130
1.156
1.234
1.286
1.312
1.390
1.416
1.442
1.468
1.546
1.650
1.676
1.702
1.806
1.858
1.936
2.066
2.118
2.170
2.274
2.326
2.482
2.534
2.586
2.638
2.794
2.846
3.106
3.366
3.626
3.886
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
7
7
7
7
7
7
7
7
7
7
7
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
4
5
6
7
8
9
10
11
12
13
14
15
2-41
16
I
R
TIMING BELT PULLEYS 40 D.P.

FOR 3/16" BELTS

DOUBLE FLANGE
Inch
MATERIAL:
Aluminum Alloy
FINISH:
Clear Anodized
SPECIFICATION:

SET
SCREW
D
S
.32
O.D. F.D.
C B
F.D. O.D.
6
7
8
9
10
11
12
13
14
15
16
B C
SET SCREW
.22
Fig. 1
.22
Fig. 2
INCH COMPONENT
Catalog Number
Fig. 1
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
Fig. 2
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
No.
of
P.D.
Grooves
O.D.
F.D.
+.000
-.003
1/64
B
E
Bore Length
+.001
-.000
1/64
C
Hub
Dia.
1/64
D
Hub
Proj.
Set
Screw
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6-10DF01803
6-10DF01804
6-11DF01803
6-11DF01804
6-12DF01803
6-12DF01804
6-13DF01804
6-14DF01804
6-15DF01804
6-15DF01806
6-16DF01804
6-16DF01806
6-18DF01808
6-20DF01808
6-21DF01808
6-22DF01808
10
10
11
11
12
12
13
14
15
15
16
16
18
20
21
22
.260
.260
.286
.286
.312
.312
.338
.364
.390
.390
.416
.416
.468
.520
.546
.572
.246
.246
.272
.272
.298
.298
.324
.350
.376
.376
.402
.402
.454
.506
.532
.558
.425
.425
.450
.450
.480
.480
.505
.530
.555
.555
.580
.580
.635
.685
.710
.740
.094
.125
.094
.125
.094
.125
.125
.125
.125
.1875
.125
.1875
.250
.250
.250
.250
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
.425
.425
.450
.450
.480
.480
.505
.530
.555
.555
.580
.580
.635
.685
.710
.740
15/64
15/64
15/64
15/64
15/64
15/64
15/64
15/64
15/64
15/64
15/64
15/64
15/64
15/64
15/64
15/64
7/64
7/64
7/64
7/64
7/64
7/64
7/64
7/64
7/64
7/64
7/64
7/64
7/64
7/64
7/64
7/64
#2-56
#4-40
#2-56
#4-40
#2-56
#4-40
#4-40
#4-40
#4-40
#4-40
#4-40
#4-40
#8-32
#8-32
#8-32
#8-32
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6-18DF01804
6-18DF01806
6-20DF01804
6-20DF01806
6-21DF01804
6-21DF01806
6-22DF01804
6-22DF01806
6-24DF01806
6-24DF01808
6-25DF01806
6-25DF01808
6-26DF01806
6-26DF01808
6-28DF01806
6-28DF01808
18
18
20
20
21
21
22
22
24
24
25
25
26
26
28
28
.468
.468
.520
.520
.546
.546
.572
.572
.624
.624
.650
.650
.676
.676
.728
.728
.454
.454
.506
.506
.532
.532
.558
.558
.610
.610
.636
.636
.662
.662
.714
.714
.635
.635
.685
.685
.710
.710
.740
.740
.790
.790
.815
.815
.840
.840
.895
.895
.125
.1875
.125
.1875
.125
.1875
.125
.1875
.1875
.250
.1875
.250
.1875
.250
.1875
.250
9/16
9/16
9/16
9/16
9/16
9/16
9/16
9/16
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
.312
.312
.364
.364
.390
.390
.390
.390
.442
.442
.468
.468
.494
.494
.494
.494
15/64
15/64
15/64
15/64
15/64
15/64
15/64
15/64
19/64
19/64
19/64
19/64
19/64
19/64
19/64
19/64
7/64
7/64
7/64
7/64
7/64
7/64
7/64
7/64
5/32
5/32
5/32
5/32
5/32
5/32
5/32
5/32
#4-40
#6-40
#4-40
#6-40
#4-40
#6-40
#4-40
#6-40
#6-40
#6-40
#6-40
#6-40
#6-40
#6-40
#6-40
#6-40
2-42

FOR 3/16" BELTS

DOUBLE FLANGE
R
Inch
MATERIAL:
Aluminum Alloy
FINISH:
Clear Anodized
SPECIFICATION:
All pulleys have 2 set screws at 90.

E
W
D
5/32
SET
SCREW
F.D. O.D.
B C
4
.22
INCH COMPONENT
Catalog Number
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6-30DF01806
6-30DF01808
6-32DF01806
6-32DF01808
6-33DF01806
6-33DF01808
6-34DF01806
6-34DF01808
6-35DF01806
6-35DF01808
6-36DF01806
6-36DF01808
6-38DF01808
6-38DF01810
6-40DF01808
6-40DF01810
6-42DF01808
6-42DF01810
6-44DF01808
6-44DF01810
6-45DF01808
6-45DF01810
6-48DF01808
6-48DF01810
6-50DF01808
6-50DF01810
6-54DF01808
6-54DF01810
6-60DF01808
6-60DF01810
No.
of
P.D.
Grooves
30
30
32
32
33
33
34
34
35
35
36
36
38
38
40
40
42
42
44
44
45
45
48
48
50
50
54
54
60
60
.780
.780
.832
.832
.858
.858
.884
.884
.910
.910
.936
.936
.988
.988
1.040
1.040
1.092
1.092
1.144
1.144
1.170
1.170
1.248
1.248
1.300
1.300
1.404
1.404
1.560
1.560
O.D.
F.D.
+.000
-.003
1/64
.766
.766
.818
.818
.844
.844
.870
.870
.896
.896
.922
.922
.974
.974
1.026
1.026
1.078
1.078
1.130
1.130
1.156
1.156
1.234
1.234
1.286
1.286
1.390
1.390
1.546
1.546
.945
.945
1.000
1.000
1.025
1.025
1.050
1.050
1.080
1.080
1.105
1.105
1.155
1.155
1.210
1.210
1.260
1.260
1.315
1.315
1.340
1.340
1.420
1.420
1.470
1.470
1.575
1.575
1.730
1.730
B
Bore
+.001
-.000
.1875
.250
.1875
.250
.1875
.250
.1875
.250
.1875
.250
.1875
.250
.250
.3125
.250
.3125
.250
.3125
.250
.3125
.250
.3125
.250
.3125
.250
.3125
.250
.3125
.250
.3125
E
Length
.32
.32
.32
.32
.32
.32
.32
.32
.32
.32
.32
.32
.32
.32
.34
.34
.34
.34
.34
.34
.34
.34
.34
.34
.34
.34
.34
.34
.34
.34
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
21/32
21/32
21/32
21/32
21/32
21/32
21/32
21/32
21/32
21/32
21/32
21/32
21/32
21/32
21/32
21/32
1/64
C
Hub
Dia.
1/64
.546
.546
.598
.598
.624
.624
.624
.624
.650
.650
.676
.676
.728
.728
.754
.754
.806
.806
.858
.858
.884
.884
.933
.933
.988
.988
1.066
1.066
1.222
1.222
D
Set
Hub Screw
Proj.
19/64
19/64
19/64
19/64
19/64
19/64
19/64
19/64
19/64
19/64
19/64
19/64
19/64
19/64
21/64
21/64
21/64
21/64
21/64
21/64
21/64
21/64
21/64
21/64
21/64
21/64
21/64
21/64
21/64
21/64
#6-40
#8-32
#6-40
#8-32
#6-40
#8-32
#6-40
#8-32
#6-40
#8-32
#6-40
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
6
7
8
9
10
11
12
13
14
15
2-43
16
I
R

FOR 5/16" BELTS

DOUBLE FLANGE
Inch
MATERIAL:
Aluminum Alloy
FINISH:
Clear Anodized
SPECIFICATION:

2
3
SET
SCREW
D
S
O.D. F.D.
C B
F.D. O.D.
7
8
9
10
11
12
13
14
15
16
B C
SET SCREW
.35
Fig. 1
.35
4
5
.45
Fig. 2
INCH COMPONENT
Catalog Number
Fig. 1
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
Fig. 2
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
No.
of
Grooves
P.D.
O.D.
F.D.
+.000
-.003
1/64
B
E
Bore Length
+.001
-.000
1/64
C
Hub
Dia.
1/64
D
Hub
Proj.
Set
Screw
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6-10DF03103
6-10DF03104
6-11DF03103
6-11DF03104
6-12DF03103
6-12DF03104
6-13DF03104
6-14DF03104
6-15DF03104
6-15DF03106
6-16DF03104
6-16DF03106
6-18DF03108
6-20DF03108
6-21DF03108
6-22DF03108
10
10
11
11
12
12
13
14
15
15
16
16
18
20
21
22
.260
.260
.286
.286
.312
.312
.338
.364
.390
.390
.416
.416
.468
.520
.546
.572
.246
.246
.272
.272
.298
.298
.324
.350
.376
.376
.402
.402
.454
.506
.532
.558
.425
.425
.450
.450
.480
.480
.505
.530
.555
.555
.580
.580
.635
.685
.710
.740
.094
.125
.094
.125
.094
.125
.125
.125
.125
.1875
.125
.1875
.250
.250
.250
.250
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
.425
.425
.450
.450
.480
.480
.505
.530
.555
.555
.580
.580
.635
.685
.710
.740
15/64
15/64
15/64
15/64
15/64
15/64
15/64
15/64
15/64
15/64
15/64
15/64
15/64
15/64
15/64
15/64
7/64
7/64
7/64
7/64
7/64
7/64
7/64
7/64
7/64
7/64
7/64
7/64
7/64
7/64
7/64
7/64
#2-56
#4-40
#2-56
#4-40
#2-56
#4-40
#4-40
#4-40
#4-40
#4-40
#4-40
#4-40
#8-32
#8-32
#8-32
#8-32
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6-18DF03104
6-18DF03106
6-20DF03104
6-20DF03106
6-21DF03104
6-21DF03106
6-22DF03104
6-22DF03106
6-24DF03106
6-24DF03108
6-25DF03106
6-25DF03108
6-26DF03106
6-26DF03108
6-28DF03106
6-28DF03108
18
18
20
20
21
21
22
22
24
24
25
25
26
26
28
28
.468
.468
.520
.520
.546
.546
.572
.572
.624
.624
.650
.650
.676
.676
.728
.728
.454
.454
.506
.506
.532
.532
.558
.558
.610
.610
.636
.636
.662
.662
.714
.714
.635
.635
.685
.685
.710
.710
.740
.740
.790
.790
.815
.815
.840
.840
.895
.895
.125
.1875
.125
.1875
.125
.1875
.125
.1875
.1875
.250
.1875
.250
.1875
.250
.1875
.250
11/16
11/16
11/16
11/16
11/16
11/16
11/16
11/16
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
.312
.312
.364
.364
.390
.390
.390
.390
.442
.442
.468
.468
.494
.494
.494
.494
15/64
15/64
15/64
15/64
15/64
15/64
15/64
15/64
19/64
19/64
19/64
19/64
19/64
19/64
19/64
19/64
7/64
7/64
7/64
7/64
7/64
7/64
7/64
7/64
5/32
5/32
5/32
5/32
5/32
5/32
5/32
5/32
#4-40
#6-40
#4-40
#6-40
#4-40
#6-40
#4-40
#6-40
#6-40
#6-40
#6-40
#6-40
#6-40
#6-40
#6-40
#6-40
2-44

FOR 5/16" BELTS

DOUBLE FLANGE
R
Inch
MATERIAL:
Aluminum Alloy
FINISH:
Clear Anodized
SPECIFICATION:
E
W
5/32 *
SET SCREW
F.D. O.D.
B C
.35
* 7/64 for pulleys with 35 grooves
INCH COMPONENT
Catalog Number
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6-30DF03106
6-30DF03108
6-32DF03106
6-32DF03108
6-33DF03106
6-33DF03108
6-34DF03106
6-34DF03108
6-35DF03106
6-35DF03108
6-36DF03106
6-36DF03108
6-38DF03108
6-38DF03110
6-40DF03108
6-40DF03110
6-42DF03108
6-42DF03110
6-44DF03108
6-44DF03110
6-45DF03108
6-45DF03110
6-48DF03108
6-48DF03110
6-50DF03108
6-50DF03110
6-54DF03108
6-54DF03110
6-60DF03108
6-60DF03110
No.
of
P.D.
Grooves
30
30
32
32
33
33
34
34
35
35
36
36
38
38
40
40
42
42
44
44
45
45
48
48
50
50
54
54
60
60
.780
.780
.832
.832
.858
.858
.884
.884
.910
.910
.936
.936
.988
.988
1.040
1.040
1.092
1.092
1.144
1.144
1.170
1.170
1.248
1.248
1.300
1.300
1.404
1.404
1.560
1.560
O.D.
F.D.
+.000
-.003
1/64
.766
.766
.818
.818
.844
.844
.870
.870
.896
.896
.922
.922
.974
.974
1.026
1.026
1.078
1.078
1.130
1.130
1.156
1.156
1.234
1.234
1.286
1.286
1.390
1.390
1.546
1.546
.945
.945
1.000
1.000
1.025
1.025
1.050
1.050
1.080
1.080
1.105
1.105
1.155
1.155
1.210
1.210
1.260
1.260
1.315
1.315
1.340
1.340
1.420
1.420
1.470
1.470
1.575
1.575
1.730
1.730
B
Bore
+.001
-.000
.1875
.250
.1875
.250
.1875
.250
.1875
.250
.1875
.250
.1875
.250
.250
.3125
.250
.3125
.250
.3125
.250
.3125
.250
.3125
.250
.3125
.250
.3125
.250
.3125
.250
.3125
W
.449
.449
.449
.449
.449
.449
.449
.449
.449
.449
.449
.449
.449
.449
.465
.465
.465
.465
.465
.465
.465
.465
.465
.465
.465
.465
.465
.465
.465
.465
C
E
Length Hub
Dia.
1/64
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
25/32
25/32
25/32
25/32
25/32
25/32
25/32
25/32
25/32
25/32
25/32
25/32
25/32
25/32
25/32
25/32
1/64
.546
.546
.598
.598
.624
.624
.624
.624
.650
.650
.676
.676
.728
.728
.754
.754
.806
.806
.858
.858
.884
.884
.933
.933
.988
.988
1.066
1.066
1.222
1.222
D
Set
Hub Screw
Proj.
19/64
19/64
19/64
19/64
19/64
19/64
19/64
19/64
19/64
19/64
19/64
19/64
19/64
19/64
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
#6-40
#8-32
#6-40
#8-32
#6-40
#8-32
#6-40
#8-32
#6-40
#8-32
#6-40
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
6
7
8
9
10
11
12
13
14
15
2-45
16
I
R

FOR 3/16" BELTS

NO FLANGE
Inch
MATERIAL:
Aluminum Alloy
FINISH:
Clear Anodized
1
3/4 1/64
3/8
SPECIFICATION:
3/8
3/16
SET SCREW
All pulleys have 2 set screws at 90
2
O.D.
B C
3
4
INCH COMPONENT
Catalog Number
5
6
7
8
9
10
11
12
13
14
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
6A 6-20NF01806
6A 6-20NF01808
6A 6-24NF01806
6A 6-24NF01808
6A 6-30NF01808
6A 6-40NF01808
6A 6-45NF01808
6A 6-50NF01808
6A 6-50NF01810
6A 6-60NF01808
6A 6-60NF01810
6A 6-70NF01808
6A 6-70NF01812
6A 6-72NF01808
6A 6-72NF01812
6A 6-75NF01808
6A 6-75NF01812
6A 6-80NF01808
6A 6-80NF01812
6A 6-84NF01808
6A 6-84NF01812
6A 6-88NF01808
6A 6-88NF01812
6A 6-90NF01808
6A 6-90NF01812
6A 6-96NF01808
6A 6-96NF01812
6A 6-98NF01808
6A 6-98NF01812
6A61-00NF01810
6A61-00NF01812
6A61-08NF01810
6A61-08NF01812
6A61-20NF01810
6A61-20NF01812
15
16
2-46
No.
of
Grooves
P.D.
+.000
-.003
20
20
24
24
30
40
45
50
50
60
60
70
70
72
72
75
75
80
80
84
84
88
88
90
90
96
96
98
98
100
100
108
108
120
120
.520
.520
.624
.624
.780
1.040
1.170
1.300
1.300
1.560
1.560
1.820
1.820
1.872
1.872
1.950
1.950
2.080
2.080
2.184
2.184
2.288
2.288
2.340
2.340
2.496
2.496
2.548
2.548
2.600
2.600
2.808
2.808
3.120
3.120
.506
.506
.610
.610
.766
1.026
1.156
1.286
1.286
1.546
1.546
1.806
1.806
1.858
1.858
1.936
1.936
2.066
2.066
2.170
2.170
2.274
2.274
2.326
2.326
2.482
2.482
2.534
2.534
2.586
2.586
2.794
2.794
3.106
3.106
O.D.
B
Bore
+.001
-.000
.1875
.250
.1875
.250
.250
.250
.250
.250
.3125
.250
.3125
.250
.375
.250
.375
.250
.375
.250
.375
.250
.375
.250
.375
.250
.375
.250
.375
.250
.375
.3125
.375
.3125
.375
.3125
.375
C
Hub
Dia.
1/64
.436
.436
.500
.500
.656
.666
.796
.926
.926
1.186
1.186
1.150
1.150
1.202
1.202
1.266
1.266
1.396
1.396
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
Set
Screw
#6-40
#6-40
#6-40
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#10-32
#10-32
#8-32
#10-32
#8-32
#10-32
#8-32
#10-32
#8-32
#10-32
#8-32
#10-32
#8-32
#10-32
#8-32
#10-32
#8-32
#10-32
#8-32
#10-32
#8-32
#10-32
#8-32
#10-32

FOR 5/16" BELTS
NO FLANGE
R
Inch
MATERIAL:
Aluminum Alloy
FINISH:
Clear Anodized
7/8 1/64
1/2
SPECIFICATION:
3/8
3/16
SET SCREW
O.D.
T
1
2
B C
3
INCH COMPONENT
Catalog Number
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
6A 6-20NF03106
6A 6-20NF03108
6A 6-24NF03106
6A 6-24NF03108
6A 6-30NF03108
6A 6-40NF03108
6A 6-45NF03108
6A 6-50NF03108
6A 6-50NF03110
6A 6-60NF03108
6A 6-60NF03110
6A 6-70NF03108
6A 6-70NF03110
6A 6-72NF03108
6A 6-72NF03112
6A 6-75NF03108
6A 6-75NF03112
6A 6-80NF03108
6A 6-80NF03112
6A 6-84NF03108
6A 6-84NF03112
6A 6-88NF03108
6A 6-88NF03112
6A 6-90NF03108
6A 6-90NF03112
6A 6-96NF03108
6A 6-96NF03112
6A 6-98NF03108
6A 6-98NF03112
6A61-00NF03110
6A61-00NF03112
6A61-08NF03110
6A61-08NF03112
6A61-10NF03112
6A61-20NF03110
6A61-20NF03112
6A61-30NF03112
6A61-40NF03112
6A61-50NF03112
No.
of
Grooves
P.D.
+.000
-.003
20
20
24
24
30
40
45
50
50
60
60
70
70
72
72
75
75
80
80
84
84
88
88
90
90
96
96
98
98
100
100
108
108
110
120
120
130
140
150
.520
.520
.624
.624
.780
1.040
1.170
1.300
1.300
1.560
1.560
1.820
1.820
1.872
1.872
1.950
1.950
2.080
2.080
2.184
2.184
2.288
2.288
2.340
2.340
2.496
2.496
2.548
2.548
2.600
2.600
2.808
2.808
2.860
3.120
3.120
3.380
3.640
3.900
.506
.506
.610
.610
.766
1.026
1.156
1.286
1.286
1.546
1.546
1.806
1.806
1.858
1.858
1.936
1.936
2.066
2.066
2.170
2.170
2.274
2.274
2.326
2.326
2.482
2.482
2.534
2.534
2.586
2.586
2.794
2.794
2.846
3.106
3.106
3.366
3.626
3.886
O.D.
B
Bore
+.001
-.000
.1875
.250
.1875
.250
.250
.250
.250
.250
.3125
.250
.3125
.250
.3125
.250
.375
.250
.375
.250
.375
.250
.375
.250
.375
.250
.375
.250
.375
.250
.375
.3125
.375
.3125
.375
.375
.3125
.375
.375
.375
.375
C
Hub
Dia.
1/64
.436
.436
.500
.500
.656
.666
.796
.926
.926
1.186
1.186
1.150
1.150
1.202
1.202
1.266
1.266
1.396
1.396
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.625
1.750
2.000
4
Set
Screw
#6-40
#6-40
#6-40
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#10-32
#8-32
#10-32
#8-32
#10-32
#8-32
#10-32
#8-32
#10-32
#8-32
#10-32
#8-32
#10-32
#8-32
#10-32
#8-32
#10-32
#8-32
#10-32
#8-32
#10-32
#10-32
#8-32
#10-32
#10-32
#10-32
#10-32
2-47
REV: 04.10.12 mh
5
6
7
8
9
10
11
12
13
14
15
16
I
R
T
1
2
3

FOR 1/4" BELTS

DOUBLE FLANGE
MOLDED WITH INSERT
Inch
MATERIAL:
Pulley - Acetal
SPECIFICATIONS:

do not have webs.
Pulleys with:
11/16

.1875
#4-40
.250
#6-32
.3125
#8-32
11/64
.090 WEB
F.D. O.D.
8
9
10
11
12
13
14
Catalog Number
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6-34DF02506
6-34DF02508
6-34DF02510
6-36DF02506
6-36DF02508
6-36DF02510
6-38DF02506
6-38DF02508
6-38DF02510
6-40DF02506
6-40DF02508
6-40DF02510
6-42DF02506
6-42DF02508
6-42DF02510
6-44DF02506
6-44DF02508
6-44DF02510
6-46DF02506
6-46DF02508
6-46DF02510
6-48DF02506
6-48DF02508
6-48DF02510
6-50DF02506
6-50DF02508
6-50DF02510
6-51DF02508
6-51DF02510
15
16
5/32
B 7/16 11/16
2-48
1/4
1/16 (TYP)
INCH COMPONENT
9/64
SET SCREW
SPOT DRILL
5
6
5/16
No.
of
Grooves
P.D.
O.D.
34
34
34
36
36
36
38
38
38
40
40
40
42
42
42
44
44
44
46
46
46
48
48
48
50
50
50
51
51
.884
.884
.884
.936
.936
.936
.988
.988
.988
1.040
1.040
1.040
1.092
1.092
1.092
1.144
1.144
1.144
1.196
1.196
1.196
1.248
1.248
1.248
1.300
1.300
1.300
1.326
1.326
.870
.870
.870
.922
.922
.922
.974
.974
.974
1.026
1.026
1.026
1.078
1.078
1.078
1.130
1.130
1.130
1.182
1.182
1.182
1.234
1.234
1.234
1.286
1.286
1.286
1.312
1.312
F.D.
B
Bore
+.001
-.000
1.00
.1875
1.00
.250
1.00
.3125
1.10
.1875
1.10
.250
1.10
.3125
1.15
.1875
1.15
.250
1.15
.3125
1.21
.1875
1.21
.250
1.21
.3125
1.26
.1875
1.26
.250
1.26
.3125
1.31
.1875
1.31
.250
1.31
.3125
1.37
.1875
1.37
.250
1.37
.3125
1.42
.1875
1.42
.250
1.42
.3125
1.47
.1875
1.47
.250
1.47
.3125
1.49
.250
1.49
.3125

FOR 1/4" BELTS

DOUBLE FLANGE
MOLDED WITH INSERT
R
Inch
MATERIAL:
Pulley - Acetal
SPECIFICATIONS:
T
1
Pulleys with:

.250
#6-32
.3125
#8-32
11/16
11/64
.090 WEB
F.D. O.D.
9/64
SET SCREW
5/32
B 7/16 11/16
SPOT DRILL
1/16 (TYP)
INCH COMPONENT
Catalog Number
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
6Z 6-54DF02508
6Z 6-54DF02510
6Z 6-60DF02508
6Z 6-60DF02510
6Z 6-70DF02508
6Z 6-70DF02510
6Z 6-72DF02508
6Z 6-72DF02510
6Z 6-75DF02508
6Z 6-75DF02510
6Z 6-80DF02508
6Z 6-80DF02510
6Z 6-84DF02508
6Z 6-84DF02510
6Z 6-90DF02508
6Z 6-90DF02510
6Z 6-96DF02508
6Z 6-96DF02510
6Z 6-97DF02508
6Z 6-97DF02510
6Z 6-98DF02508
6Z 6-98DF02510
6Z 6-99DF02508
6Z 6-99DF02510
6Z61-00DF02508
6Z61-00DF02510
6Z61-02DF02508
6Z61-02DF02510
6Z61-10DF02508
6Z61-10DF02510
6Z61-20DF02508
6Z61-20DF02510
1/4
5/16
No.
of
Grooves
P.D.
O.D.
F.D.
54
54
60
60
70
70
72
72
75
75
80
80
84
84
90
90
96
96
97
97
98
98
99
99
100
100
102
102
110
110
120
120
1.404
1.404
1.560
1.560
1.820
1.820
1.872
1.872
1.950
1.950
2.080
2.080
2.184
2.184
2.340
2.340
2.496
2.496
2.524
2.524
2.548
2.548
2.574
2.574
2.600
2.600
2.652
2.652
2.860
2.860
3.120
3.120
1.390
1.390
1.546
1.546
1.806
1.806
1.858
1.858
1.936
1.936
2.066
2.066
2.170
2.170
2.326
2.326
2.482
2.482
2.508
2.508
2.534
2.534
2.559
2.559
2.586
2.586
2.638
2.638
2.846
2.846
3.106
3.106
1.57
1.57
1.72
1.72
1.99
1.99
2.03
2.03
2.12
2.12
2.25
2.25
2.35
2.35
2.51
2.51
2.66
2.66
2.67
2.67
2.71
2.71
2.75
2.75
2.77
2.77
2.82
2.82
3.03
3.03
3.36
3.36
B
Bore
+.001
-.000
.250
.3125
.250
.3125
.250
.3125
.250
.3125
.250
.3125
.250
.3125
.250
.3125
.250
.3125
.250
.3125
.250
.3125
.250
.3125
.250
.3125
.250
.3125
.250
.3125
.250
.3125
.250
.3125
2-49
6
7
8
9
10
11
12
13
14
15
16
I
R
T
1
2
3

FOR 1/4" BELTS

SINGLE FLANGE
MOLDED WITH INSERT
Inch
MATERIAL:
Pulley - Acetal
SPECIFICATIONS:

do not have webs.
Pulleys with:
11/16

.1875
#4-40
.250
#6-32
.3125
#8-32
11/64
.090 WEB
F.D. O.D.
9/64
SET SCREW
5/32
B 7/16 11/16
SPOT DRILL
1/4
1/16
5/16
INCH COMPONENT
6
7
8
9
10
11
12
13
14
Catalog Number
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6-34SF02506
6-34SF02508
6-34SF02510
6-36SF02506
6-36SF02508
6-36SF02510
6-38SF02506
6-38SF02508
6-38SF02510
6-40SF02506
6-40SF02508
6-40SF02510
6-42SF02506
6-42SF02508
6-42SF02510
6-44SF02506
6-44SF02508
6-44SF02510
6-46SF02506
6-46SF02508
6-46SF02510
6-48SF02506
6-48SF02508
6-48SF02510
6-50SF02506
6-50SF02508
6-50SF02510
6-51SF02508
6-51SF02510
15
16
2-50
No.
of
Grooves
P.D.
O.D.
34
34
34
36
36
36
38
38
38
40
40
40
42
42
42
44
44
44
46
46
46
48
48
48
50
50
50
51
51
.884
.884
.884
.936
.936
.936
.988
.988
.988
1.040
1.040
1.040
1.092
1.092
1.092
1.144
1.144
1.144
1.196
1.196
1.196
1.248
1.248
1.248
1.300
1.300
1.300
1.326
1.326
.870
.870
.870
.922
.922
.922
.974
.974
.974
1.026
1.026
1.026
1.078
1.078
1.078
1.130
1.130
1.130
1.182
1.182
1.182
1.234
1.234
1.234
1.286
1.286
1.286
1.312
1.312
F.D.
B
Bore
+.001
-.000
1.00
.1875
1.00
.250
1.00
.3125
1.10
.1875
1.10
.250
1.10
.3125
1.15
.1875
1.15
.250
1.15
.3125
1.21
.1875
1.21
.250
1.21
.3125
1.26
.1875
1.26
.250
1.26
.3125
1.31
.1875
1.31
.250
1.31
.3125
1.37
.1875
1.37
.250
1.37
.3125
1.42
.1875
1.42
.250
1.42
.3125
1.47
.1875
1.47
.250
1.47
.3125
1.49
.250
1.49
.3125

FOR 1/4" BELTS

SINGLE FLANGE
MOLDED WITH INSERT
R
Inch
MATERIAL:
Pulley - Acetal
SPECIFICATIONS:
T
1
Pulleys with:

.250
#6-32
.3125
#8-32
11/16
11/64
.090 WEB
F.D. O.D.
9/64
SET SCREW
5/32
B 7/16 11/16
SPOT DRILL
5/16
INCH COMPONENT
Catalog Number
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
6Z 6-54SF02508
6Z 6-54SF02510
6Z 6-60SF02508
6Z 6-60SF02510
6Z 6-70SF02508
6Z 6-70SF02510
6Z 6-72SF02508
6Z 6-72SF02510
6Z 6-75SF02508
6Z 6-75SF02510
6Z 6-80SF02508
6Z 6-80SF02510
6Z 6-84SF02508
6Z 6-84SF02510
6Z 6-90SF02508
6Z 6-90SF02510
6Z 6-96SF02508
6Z 6-96SF02510
6Z 6-97SF02508
6Z 6-97SF02510
6Z 6-98SF02508
6Z 6-98SF02510
6Z 6-99SF02508
6Z 6-99SF02510
6Z61-00SF02508
6Z61-00SF02510
6Z61-02SF02508
6Z61-02SF02510
6Z61-10SF02508
6Z61-10SF02510
6Z61-20SF02508
6Z61-20SF02510
1/4
1/16
No.
of
Grooves
P.D.
O.D.
F.D.
54
54
60
60
70
70
72
72
75
75
80
80
84
84
90
90
96
96
97
97
98
98
99
99
100
100
102
102
110
110
120
120
1.404
1.404
1.560
1.560
1.820
1.820
1.872
1.872
1.950
1.950
2.080
2.080
2.184
2.184
2.340
2.340
2.496
2.496
2.524
2.524
2.548
2.548
2.574
2.574
2.600
2.600
2.652
2.652
2.860
2.860
3.120
3.120
1.390
1.390
1.546
1.546
1.806
1.806
1.858
1.858
1.936
1.936
2.066
2.066
2.170
2.170
2.326
2.326
2.482
2.482
2.508
2.508
2.534
2.534
2.559
2.559
2.586
2.586
2.638
2.638
2.846
2.846
3.106
3.106
1.57
1.57
1.72
1.72
1.99
1.99
2.03
2.03
2.12
2.12
2.25
2.25
2.35
2.35
2.51
2.51
2.66
2.66
2.67
2.67
2.71
2.71
2.75
2.75
2.77
2.77
2.82
2.82
3.03
3.03
3.36
3.36
B
Bore
+.001
-.000
.250
.3125
.250
.3125
.250
.3125
.250
.3125
.250
.3125
.250
.3125
.250
.3125
.250
.3125
.250
.3125
.250
.3125
.250
.3125
.250
.3125
.250
.3125
.250
.3125
.250
.3125
.250
.3125
2-51
6
7
8
9
10
11
12
13
14
15
16
I
R
T

FOR 1/4" BELTS

MOLDED
DOUBLE FLANGE
Inch
MATERIAL:
Acetal
11/16
SPECIFICATION:

do not have webs.
.090 WEB
F.D. O.D.
1/16 (TYP)
5/16
INCH COMPONENT
Catalog Number
5
6
7
8
9
10
11
12
13
14
15
16
1/4
B C
3
4
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
6M 6-10DF02503
6M 6-11DF02503
6M 6-14DF02504
6M 6-15DF02504
6M 6-18DF02506
6M 6-19DF02506
6M 6-20DF02506
6M 6-21DF02506
6M 6-24DF02506
6M 6-25DF02508
6M 6-28DF02508
6M 6-30DF02508
6M 6-32DF02508
6M 6-34DF02508
6M 6-36DF02508
6M 6-38DF02508
6M 6-40DF02508
6M 6-42DF02508
6M 6-44DF02508
6M 6-46DF02508
6M 6-48DF02508
6M 6-50DF02508
6M 6-51DF02508
6M 6-54DF02508
6M 6-60DF02508
6M 6-70DF02508
6M 6-72DF02510
6M 6-75DF02510
6M 6-80DF02510
6M 6-84DF02510
6M 6-90DF02510
6M 6-96DF02510
6M 6-97DF02510
6M 6-98DF02510
6M 6-99DF02510
6M61-00DF02510
6M61-02DF02510
6M61-10DF02510
6M61-20DF02510
2-52
No.
of
Grooves
P.D.
O.D.
F.D.
10
11
14
15
18
19
20
21
24
25
28
30
32
34
36
38
40
42
44
46
48
50
51
54
60
70
72
75
80
84
90
96
97
98
99
100
102
110
120
.260
.286
.364
.390
.468
.494
.520
.546
.624
.650
.728
.780
.832
.884
.936
.988
1.040
1.092
1.144
1.196
1.248
1.300
1.326
1.404
1.560
1.820
1.872
1.950
2.080
2.184
2.340
2.496
2.524
2.548
2.574
2.600
2.652
2.860
3.120
.246
.272
.350
.376
.454
.480
.506
.532
.610
.636
.714
.766
.818
.870
.922
.974
1.026
1.078
1.130
1.182
1.234
1.286
1.312
1.390
1.546
1.806
1.858
1.936
2.066
2.170
2.326
2.482
2.508
2.534
2.559
2.586
2.638
2.846
3.106
.42
.45
.54
.56
.64
.67
.69
.73
.80
.83
.90
.95
1.00
1.00
1.10
1.15
1.21
1.26
1.31
1.37
1.42
1.47
1.49
1.57
1.72
1.99
2.03
2.12
2.25
2.35
2.51
2.66
2.67
2.71
2.75
2.77
2.82
3.03
3.36
B
Bore
+.001
-.002
.094
.094
.125
.125
.1875
.1875
.1875
.1875
.1875
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
.3125
.3125
.3125
.3125
.3125
.3125
.3125
.3125
.3125
.3125
.3125
.3125
.3125
C
Hub
Dia.
7/16
7/16
7/16
7/16
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
11/16
11/16
11/16
11/16
11/16
11/16
11/16
11/16
11/16
11/16
11/16
11/16
11/16
11/16
11/16
11/16
11/16
11/16
11/16
11/16
11/16
11/16
11/16
11/16
11/16
11/16

FOR 1/4" BELTS

MOLDED
SINGLE FLANGE
R
Inch
MATERIAL:
Acetal
11/16
SPECIFICATION:
1/4
.090 WEB

do not have webs.
F.D. O.D.
5/32
1
2
B C
1/16
5/16
INCH COMPONENT
Catalog Number
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
6M 6-10SF02503
6M 6-11SF02503
6M 6-14SF02504
6M 6-15SF02504
6M 6-18SF02506
6M 6-19SF02506
6M 6-20SF02506
6M 6-21SF02506
6M 6-24SF02506
6M 6-25SF02508
6M 6-28SF02508
6M 6-30SF02508
6M 6-32SF02508
6M 6-34SF02508
6M 6-36SF02508
6M 6-38SF02508
6M 6-40SF02508
6M 6-42SF02508
6M 6-44SF02508
6M 6-46SF02508
6M 6-48SF02508
6M 6-50SF02508
6M 6-51SF02508
6M 6-54SF02508
6M 6-60SF02508
6M 6-70SF02508
6M 6-72SF02510
6M 6-75SF02510
6M 6-80SF02510
6M 6-84SF02510
6M 6-90SF02510
6M 6-96SF02510
6M 6-97SF02510
6M 6-98SF02510
6M 6-99SF02510
6M61-00SF02510
6M61-02SF02510
6M61-10SF02510
6M61-20SF02510
No.
of
Grooves
P.D.
O.D.
F.D.
10
11
14
15
18
19
20
21
24
25
28
30
32
34
36
38
40
42
44
46
48
50
51
54
60
70
72
75
80
84
90
96
97
98
99
100
102
110
120
.260
.286
.364
.390
.468
.494
.520
.546
.624
.650
.728
.780
.832
.884
.936
.988
1.040
1.092
1.144
1.196
1.248
1.300
1.326
1.404
1.560
1.820
1.872
1.950
2.080
2.184
2.340
2.496
2.524
2.548
2.574
2.600
2.652
2.860
3.120
.246
.272
.350
.376
.454
.480
.506
.532
.610
.636
.714
.766
.818
.870
.922
.974
1.026
1.078
1.130
1.182
1.234
1.286
1.312
1.390
1.546
1.806
1.858
1.936
2.066
2.170
2.326
2.482
2.508
2.534
2.559
2.586
2.638
2.846
3.106
.42
.45
.54
.56
.64
.67
.69
.73
.80
.83
.90
.95
1.00
1.00
1.10
1.15
1.21
1.26
1.31
1.37
1.42
1.47
1.49
1.57
1.72
1.99
2.03
2.12
2.25
2.35
2.51
2.66
2.67
2.71
2.75
2.77
2.82
3.03
3.36
B
Bore
+.001
-.002
.094
.094
.125
.125
.1875
.1875
.1875
.1875
.1875
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
.3125
.3125
.3125
.3125
.3125
.3125
.3125
.3125
.3125
.3125
.3125
.3125
.3125
C
Hub
Dia.
7/16
7/16
7/16
7/16
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
11/16
11/16
11/16
11/16
11/16
11/16
11/16
11/16
11/16
11/16
11/16
11/16
11/16
11/16
11/16
11/16
11/16
11/16
11/16
11/16
11/16
11/16
11/16
11/16
11/16
11/16
2-53
4
5
6
7
8
9
10
11
12
13
14
15
16
I
R
T
XL TIMING BELTS 1/5" OR 5.08 mm PITCH

BELT WIDTHS
INCH - 1/4, 5/16 & 3/8
METRIC - 6, 8 & 9.5 mm
NON-MARKING
LOW DUST
RoHS COMPLIANT
PowerGrip TruMotion
MATERIAL:
SPECIFICATIONS:
3
4
Inch

Breaking Strength:
not representative of the load-carrying capacity of the belt.
Working Tension:
Temperature Range:
-40F to +220F (-40C to +104C)
.015 R
(0.4 R)
TYP
MODIFICATIONS:
5
6
7
10
11

.050
(1.3)
BELT WIDTH
50
INCH COMPONENT
CATALOG NUMBER
A26R 3No. of
Grooves
Code
Belt Width
Inch
1/4
5/16
3/8
Width
Code
025
031
037
METRIC COMPONENT
CATALOG NUMBER
A26R 3M
No. of
Grooves
Code
12
13
14
15
16
.200
(5.08)
.054
(1.4)
.090
(2.3)

8
9
2-54
Belt Width
mm
Width
Code
6
8
9.5
060
080
095
Pitch Length
Groove
Code
Inch
mm
021
025
027
028
029
030
031
032
033
034
035
036
037
038
039
040
041
042
043
044
045
046
047
048
049
050
051
4.2
5.0
5.4
5.6
5.8
6.0
6.2
6.4
6.6
6.8
7.0
7.2
7.4
7.6
7.8
8.0
8.2
8.4
8.6
8.8
9.0
9.2
9.4
9.6
9.8
10.0
10.2
106.68
127
137.16
142.24
147.32
152.4
157.48
162.56
167.64
172.72
177.8
182.88
187.96
193.04
198.12
203.2
208.28
213.36
218.44
223.52
228.6
233.68
238.76
243.84
248.92
254
259.08
Groove
Code
Pitch Length
Inch
mm
053
269.24
10.6
054
274.32
10.8
055
279.4
11.0
056
284.48
11.2
057
289.56
11.4
058
294.64
11.6
060
304.8
12.0
061
309.88
12.2
062
314.96
12.4
063
320.04
12.6
064
325.12
12.8
065
330.2
13.0
066
335.28
13.2
067
340.36
13.4
068
345.44
13.6
069
350.52
13.8
070
355.6
14.0
071
360.68
14.2
072
365.76
14.4
073
370.84
14.6
074
375.92
14.8
075
381
15.0
076
386.08
15.2
077
15.4
391.16
078
396.24
15.6
079
401.32
15.8
080
406.4
16.0

R
Inch
T
1
Pitch Length
Groove
Code
Inch
081
082
083
084
085
086
087
088
089
090
091
092
093
094
095
096
097
100
101
102
103
105
106
107
109
110
111
113
114
115
116
117
16.2
16.4
16.6
16.8
17.0
17.2
17.4
17.6
17.8
18.0
18.2
18.4
18.6
18.8
19.0
19.2
19.4
20.0
20.2
20.4
20.6
21.0
21.2
21.4
21.8
22.0
22.2
22.6
22.8
23.0
23.2
23.4
Pitch Length
mm
Groove
Code
Inch
mm
411.48
416.56
421.64
426.72
431.8
436.88
441.96
447.04
452.12
457.2
462.28
467.36
472.44
477.52
482.6
487.68
492.76
508
513.08
518.16
523.24
533.4
538.48
543.56
553.72
558.8
563.88
574.04
579.12
584.2
589.28
594.36
118
120
122
123
125
127
129
130
131
132
133
134
137
140
143
145
148
150
153
155
158
160
161
165
169
170
172
174
175
176
181
185
23.6
24.0
24.4
24.6
25.0
25.4
25.8
26.0
26.2
26.4
26.6
26.8
27.4
28.0
28.6
29.0
29.6
30.0
30.6
31.0
31.6
32.0
32.2
33.0
33.8
34.0
34.4
34.8
35.0
35.2
36.2
37.0
599.44
609.6
619.76
624.84
635
645.16
655.32
660.4
665.48
670.56
675.64
680.72
695.96
711.2
726.44
736.6
751.84
762
777.24
787.4
802.64
812.8
817.88
838.2
858.52
863.6
873.76
883.92
889
894.08
919.48
939.8
Pitch Length
Groove
Code
Inch
mm
190
192
195
200
206
210
212
216
219
222
225
227
230
234
240
243
246
249
250
253
262
277
285
290
296
306
315
336
345
385
425
38.0
38.4
39.0
40.0
41.2
42.0
42.4
43.2
43.8
44.4
45.0
45.4
46.0
46.8
48.0
48.6
49.2
49.8
50.0
50.6
52.4
55.4
57.0
58.0
59.2
61.2
63.0
67.2
69.0
77.0
85.0
965.2
975.36
990.6
1016
1046.48
1066.8
1076.96
1097.28
1112.52
1127.76
1143
1153.16
1168.4
1188.72
1219.2
1234.44
1249.68
1264.92
1270
1285.24
1330.96
1407.16
1447.8
1473.2
1503.68
1554.48
1600.2
1706.88
1752.6
1955.8
2159
2
3
4
5
6
7
8
9
10
11
12
13
14
15
2-55
16
I
R
T

BELT WIDTHS
INCH - 1/4, 5/16, 3/8 & 1/2
METRIC - 6, 8, 9.5 & 12.7 mm
Inch
MATERIAL:
SPECIFICATIONS:
1
2
3
4
5
Breaking Strength:
Working Tension:
28 lbf for 1 in. belt (125 N for 25.4 mm belt).
Temperature Range:
-30F to +185F (-34C to +85C)
.015
(0.4 R)
(TYP)
MODIFICATIONS:
.200
(5.08)
.054
(1.4)
.050
(1.3)
.090
(2.3)
BELT WIDTH
50
6
7
INCH COMPONENT
CATALOG NUMBER
A 6R 3No. of
Grooves
Code
8
9
10
11
Belt Width
Inch
1/4
5/16
3/8
1/2
METRIC COMPONENT
CATALOG NUMBER
A 6R 3M
12
13
14
No. of
Grooves
Code
Belt Width
mm
6
8
9.5
12.7
15
16
Width
Code
025
031
037
050
Width
Code
060
080
095
127
Pitch Length
Groove
Code
Inch
021
023
025
027
028
029
030
031
032
033
034
035
036
037
038
039
040
041
042
043
044
045
046
047
048
049
050
051
052
4.2
4.6
5.0
5.4
5.6
5.8
6.0
6.2
6.4
6.6
6.8
7.0
7.2
7.4
7.6
7.8
8.0
8.2
8.4
8.6
8.8
9.0
9.2
9.4
9.6
9.8
10.0
10.2
10.4
Pitch Length
mm
Groove
Code
Inch
mm
106.68
116.84
127
137.16
142.24
147.32
152.4
157.48
162.56
167.64
172.72
177.8
182.88
187.96
193.04
198.12
203.2
208.28
213.36
218.44
223.52
228.6
233.68
238.76
243.84
248.92
254
259.08
264.16
053
054
055
056
057
058
059
060
061
062
063
064
065
066
067
068
069
070
071
072
073
074
075
076
077
078
079
080
081
10.6
10.8
11.0
11.2
11.4
11.6
11.8
12.0
12.2
12.4
12.6
12.8
13.0
13.2
13.4
13.6
13.8
14.0
14.2
14.4
14.6
14.8
15.0
15.2
15.4
15.6
15.8
16.0
16.2
269.24
274.32
279.4
284.48
289.56
294.64
299.72
304.8
309.88
314.96
320.04
325.12
330.2
335.28
340.36
345.44
350.52
355.6
360.68
365.76
370.84
375.92
381
386.08
391.16
396.24
401.32
406.4
411.48
2-56

R
Inch
0
Pitch Length
Groove
Code
Inch
082
083
084
085
086
087
088
089
090
091
092
093
094
095
096
097
098
099
100
101
102
103
104
105
106
107
109
110
111
112
113
114
115
116
117
118
120
121
122
123
124
125
127
128
129
130
131
132
133
134
16.4
16.6
16.8
17.0
17.2
17.4
17.6
17.8
18.0
18.2
18.4
18.6
18.8
19.0
19.2
19.4
19.6
19.8
20.0
20.2
20.4
20.6
20.8
21.0
21.2
21.4
21.8
22.0
22.2
22.4
22.6
22.8
23.0
23.2
23.4
23.6
24.0
24.2
24.4
24.6
24.8
25.0
25.4
25.6
25.8
26.0
26.2
26.4
26.6
26.8
Pitch Length
mm
Groove
Code
Inch
mm
416.56
421.64
426.72
431.8
436.88
441.96
447.04
452.12
457.24
462.28
467.36
472.44
477.52
482.6
487.68
492.76
497.84
502.92
508
513.08
518.16
523.24
528.32
533.4
538.48
543.56
553.72
558.8
563.88
568.96
574.04
579.12
584.2
589.28
594.36
599.44
609.6
614.68
619.76
624.84
629.92
635
645.16
650.24
655.32
660.4
665.48
670.56
675.64
680.72
135
136
137
138
140
142
143
145
146
148
150
151
153
155
157
158
160
161
165
166
169
170
172
174
175
176
178
180
181
182
185
186
188
190
191
192
193
194
195
196
198
200
202
204
206
207
210
212
215
216
27.0
27.2
27.4
27.6
28.0
28.4
28.6
29.0
29.2
29.6
30.0
30.2
30.6
31.0
31.4
31.6
32.0
32.2
33.0
33.2
33.8
34.0
34.4
34.8
35.0
35.2
35.6
36.0
36.2
36.4
37.0
37.2
37.6
38.0
38.2
38.4
38.6
38.8
39.0
39.2
39.6
40.0
40.4
40.8
41.2
41.4
42.0
42.4
43.0
43.2
685.8
690.88
695.96
701.04
711.2
721.36
726.44
736.6
741.68
751.84
762
767.08
777.24
787.4
797.56
802.64
812.8
817.88
838.2
843.28
858.52
863.6
873.76
883.92
889
894.08
904.24
914.4
919.48
924.56
939.8
944.88
955.04
965.2
970.28
975.36
980.44
985.52
990.6
995.68
1005.84
1016
1026.16
1036.32
1046.48
1051.56
1066.8
1076.96
1092.2
1097.28
Groove
Code
217
219
222
225
227
228
230
234
235
240
243
245
246
249
250
253
* 254
257
261
262
266
270
* 274
277
280
282
283
285
290
296
304
306
315
331
335
336
345
368
380
384
385
405
414
425
430
444
450
510
590
1
Pitch Length
Inch
mm
43.4
43.8
44.4
45.0
45.4
45.6
46.0
46.8
47.0
48.0
48.6
49.0
49.2
49.8
50.0
50.6
50.8
51.4
52.2
52.4
53.2
54.0
54.8
55.4
56.0
56.4
56.6
57.0
58.0
59.2
60.8
61.2
63.0
66.2
67.0
67.2
69.0
73.6
76.0
76.8
77.0
81.0
82.8
85.0
86.0
88.8
90.0
102.0
118.0
1102.36
1112.52
1127.76
1143
1153.16
1158.24
1168.4
1188.72
1193.8
1219.2
1234.44
1244.6
1249.68
1264.92
1270
1285.24
1290.32
1305.56
1325.88
1330.96
1351.28
1371.6
1391.92
1407.16
1422.4
1432.56
1437.64
1447.8
1473.2
1503.68
1544.32
1554.48
1600.2
1681.48
1701.8
1706.88
1752.6
1869.44
1930.4
1950.72
1955.8
2057.4
2103.12
2159
2184.4
2255.52
2286
2590.8
2997.2
T
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
2-57
16
I
R

BELT WIDTHS
INCH - 1/4, 5/16, 3/8 & 1/2
METRIC - 6, 8, 9.5 & 12.7 mm
Inch
MATERIAL:
T
1
2
3
4
Body - Polyurethane
Cord - Kevlar
SPECIFICATIONS:
Breaking Strength:
Temperature Range:
MODIFICATIONS:
.015 R
(0.4 R)
(TYP)

INCH COMPONENT
CATALOG NUMBER
A 6
Polyester Cord G
Kevlar Cord
B
10
No. of
Grooves
Code
Width
Code
025
031
037
050
METRIC COMPONENT
CATALOG NUMBER
A 6 3M
Polyester Cord G
Kevlar Cord
B
No. of
Grooves
Code
Belt Width
mm
6
8
9.5
12.7
13
14
15
16
3-
Belt Width
Inch
1/4
5/16
3/8
1/2
12
.050
(1.27)
50
BELT WIDTH
11
.200
(5.08)
.051
(1.3)
.090
(2.3)
2-58
Width
Code
060
080
095
127
Pitch Length
Groove
Code
Inch
mm
020
025
030
034
035
040
041
042
045
047
048
050
052
055
060
065
070
072
075
078
080
083
085
4.0
5.0
6.0
6.8
7.0
8.0
8.2
8.4
9.0
9.4
9.6
10.0
10.4
11.0
12.0
13.0
14.0
14.4
15.0
15.6
16.0
16.6
17.0
101.6
127
152.4
172.7
177.8
203.2
208.3
213.4
228.6
238.8
243.8
254
264.2
279.4
304.8
330.2
355.6
365.8
381
396.2
406.4
421.6
431.8
Pitch Length
Groove
Code
Inch
mm
086
088
090
095
100
105
110
115
120
125
130
135
140
145
150
165
170
172
175
180
230
240
17.2
17.6
18.0
19.0
20.0
21.0
22.0
23.0
24.0
25.0
26.0
27.0
28.0
29.0
30.0
33.0
34.0
34.4
35.0
36.0
46.0
48.0
436.9
447
457.2
482.6
508
533.4
558.8
584.2
609.6
635
660.4
685.8
711.2
736.6
762
838.2
863.6
873.7
889
914.4
1168.4
1219.2
XL DOUBLE-SIDED BELTS 1/5" OR 5.08 mm PITCH

BELT WIDTHS
INCH - 1/4, 5/16, 3/8 & 1/2
METRIC - 6, 8, 9.5 & 12.7 mm
R
Inch
MATERIAL:
SPECIFICATIONS:
Breaking Strength:
Working Tension:
Temperature Range:
30F to +185F (-34C to +85C)
1
2
50
.200
(5.08)
BELT WIDTH
MODIFICATIONS:
.12
(3)

.015
(0.4)
(TYP)
.048
(1.2)
.054
(1.4)
INCH COMPONENT
CATALOG NUMBER
A 6R 3-D
No. of
Grooves
Code
Belt Width
Inch
1/4
5/16
3/8
1/2
Width
Code
025
031
037
050
METRIC COMPONENT
CATALOG NUMBER
A 6R 3MD
Pitch Length
Groove
Code
Inch
030
035
040
045
050
055
060
065
070
075
080
085
090
095
100
105
6.0
7.0
8.0
9.0
10.0
11.0
12.0
13.0
14.0
15.0
16.0
17.0
18.0
19.0
20.0
21.0
Pitch Length
mm
Groove
Code
Inch
mm
152.4
177.8
203.2
228.6
254
279.4
304.8
330.2
355.6
381
406.4
431.8
457.2
482.6
508
533.4
110
115
120
125
130
140
145
150
155
165
181
195
196
225
246
345
22.0
23.0
24.0
25.0
26.0
28.0
29.0
30.0
31.0
33.0
36.2
39.0
39.2
45.0
49.2
69.0
558.8
584.2
609.6
635
660.4
711.2
736.6
762
787.4
838.2
919.48
990.6
995.68
1143
1249.68
1752.6
No. of
Grooves
Code
Belt Width
mm
6
8
9.5
12.7
Width
Code
060
080
095
127
5
6
7
8
9
10
11
12
13
14
15
2-59
16
I
R
XL DOUBLE-SIDED BELTS 1/5" OR 5.08 mm PITCH

BELT WIDTHS
INCH - 1/4, 5/16, 3/8 & 1/2
METRIC - 6, 8, 9.5 & 12.7 mm
Inch
MATERIAL:
T
1
2
3
4
Body - Polyurethane
Cord - Kevlar
SPECIFICATIONS:
Breaking Strength:
Temperature Range:
50
.200
(5.08)
BELT WIDTH
MODIFICATIONS:
.12
(3)

.015 R
(0.4 R)
(TYP)
.053
(1.4)
.049
(1.2)
6
7
INCH COMPONENT
CATALOG NUMBER
A 6B 3-D
No. of
Grooves
Code
Belt Width
Inch
1/4
5/16
3/8
1/2
9
10
11
METRIC COMPONENT
CATALOG NUMBER
A 6B 3MD
No. of
Grooves
Code
12
Belt Width
mm
6
8
9.5
12.7
13
14
15
16
Width
Code
025
031
037
050
2-60
Width
Code
060
080
095
127
Pitch Length
Groove
Code
Inch
mm
070
073
075
083
085
090
095
100
105
110
115
120
135
145
160
188
200
215
245
14.0
14.6
15.0
16.6
17.0
18.0
19.0
20.0
21.0
22.0
23.0
24.0
27.0
29.0
32.0
37.6
40.0
43.0
49.0
355.6
370.84
381
421.64
431.8
457.2
482.6
508
533.4
558.8
584.2
609.6
685.8
736.6
812.8
955.04
1016
1092.2
1244.6
XL PULLEY FLANGES 1/5" OR 5.08 mm PITCH

MATERIAL:
Aluminum Alloy or Steel
SPECIFICATION:
Inch
Priced per 25 pieces
T
1
2
.065 .010
(1.65 0.25)
3
4
I.D. O.D.
.040
(1.02)
5
6
INCH COMPONENT
Catalog Number
Aluminum
Alloy
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
2-10FA
2-11FA
2-12FA
2-13FA
2-14FA
2-15FA
2-15FAX
2-16FA
2-17FA
2-18FA
2-19FA
2-20FA
2-21FA
2-22FA
2-23FA
2-24FA
2-25FA
2-26FA
2-28FA
2-30FA
2-32FA
Steel
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
6C
6C
6C
6C
6C
6C
6C
6C
6C
6C
6C
6C
6C
6C
6C
6C
6C
6C
6C
6C
6C
2-10FS
2-11FS
2-12FS
2-13FS
2-14FS
2-15FS
2-15FSX
2-16FS
2-17FS
2-18FS
2-19FS
2-20FS
2-21FS
2-22FS
2-23FS
2-24FS
2-25FS
2-26FS
2-28FS
2-30FS
2-32FS
Inch
Metric
Pulley
Grooves
Ref.
I.D.
.003
O.D.
.015
I.D.
0.08
O.D.
0.4
10
11
12
13
14
15
15
16
17
18
19
20
21
22
23
24
25
26
28
30
32
.503
.562
.562
.625
.684
.748
.814
.810
.887
.936
1.000
1.062
1.125
1.160
1.222
1.222
1.250
1.347
1.425
1.550
1.675
7/8
15/16
1
1-1/16
1-3/32
1-3/16
1-3/16
1-1/4
1-5/16
1-3/8
1-7/16
1-1/2
1-9/16
1-5/8
1-11/16
1-3/4
1-13/16
1-7/8
2
2-1/8
2-1/4
12.78
14.27
14.27
15.88
17.37
19
20.67
20.58
22.54
23.77
25.4
26.97
28.58
29.46
31.04
31.04
31.75
34.21
36.2
39.37
42.55
22.2
23.8
25.4
27
27.8
30.2
30.2
31.8
33.3
34.9
36.5
38.1
39.7
41.3
42.8
44.5
46
47.8
50.8
54
57.2
7
8
9
10
11
12
13
14
15
2-61
REV: 04.10.12 mh
16
XL TIMING PULLEY STOCK 1/5" OR 5.08 mm PITCH

MATERIAL:
Aluminum Alloy
SPECIFICATIONS:
O.D. Tolerance:
8 to 16 grooves is
17 to 31 grooves is
32 to 62 grooves is
72 & 80 grooves is
Inch
+.002/-.000 (+0.05/0)
+.003/-.000 (+0.08/0)
+.004/-.000 (+0.10/0)
+.005/-.000 (+0.13/0)
E
T
1
2
O.D. C
INCH COMPONENT
Catalog Number
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
2-08XL06
2-10XL06
2-11XL06
2-12XL08
2-13XL08
2-14XL08
2-15XL08
2-16XL08
2-17XL08
2-18XL08
2-19XL08
2-20XL08
2-21XL08
2-22XL08
2-23XL08
2-24XL08
2-25XL08
2-26XL08
2-27XL08
2-28XL08
2-29XL08
2-30XL08
2-31XL08
2-32XL08
2-33XL08
2-34XL08
2-35XL08
2-36XL08
2-37XL08
2-38XL08
2-40XL08
2-42XL08
2-43XL08
2-44XL08
2-45XL08
2-48XL08
2-50XL08
2-60XL08
2-62XL08
2-72XL08
2-80XL08
Inch
Metric
No.
of
Grooves
P.D.
O.D.
P.D.
O.D.
8
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
40
42
43
44
45
48
50
60
62
72
80
.509
.637
.700
.764
.828
.891
.955
1.019
1.082
1.146
1.210
1.273
1.337
1.401
1.464
1.528
1.592
1.655
1.719
1.783
1.846
1.910
1.974
2.037
2.101
2.165
2.228
2.292
2.355
2.419
2.546
2.674
2.737
2.801
2.865
3.056
3.183
3.820
3.947
4.584
5.093
.489
.617
.680
.744
.808
.871
.935
.999
1.062
1.126
1.190
1.253
1.317
1.381
1.444
1.508
1.572
1.635
1.699
1.763
1.826
1.890
1.954
2.017
2.081
2.145
2.208
2.272
2.335
2.399
2.526
2.654
2.717
2.781
2.845
3.036
3.163
3.800
3.927
4.564
5.073
12.9
16.2
17.8
19.4
21
22.6
24.3
25.9
27.5
29.1
30.7
32.3
34
35.6
37.2
38.8
40.4
42
43.7
45.3
46.9
48.5
50.1
51.7
53.4
55
56.6
58.2
59.8
61.4
64.7
67.9
69.5
71.1
72.8
77.6
80.9
97
100.3
116.4
129.4
12.43
15.66
17.28
18.9
20.51
22.13
23.75
25.36
26.98
28.6
30.22
31.83
33.45
35.07
36.68
38.3
39.92
41.53
43.15
44.77
46.39
48
49.62
51.24
52.85
54.47
56.09
57.7
59.32
60.94
64.17
67.41
69.02
70.64
72.26
77.11
80.34
96.51
99.75
115.92
128.85

C
Shank
Dia.
E
Shank
Length
L
Min.
Usable
Length
1/2 (12.7)
7/8 (22.3)
6 (152.4)
[7/16 (11.1)] 7/8 (22.3)
6 (152.4)
1/2 (12.7)
7/8 (22.3)
6 (152.4)
1/2 (12.7)
8 (203.2)
1/2 (12.7)
8 (203.2)
1/2 (12.7)
8 (203.2)
1/2 (12.7)
8 (203.2)
1/2 (12.7)
8 (203.2)
1/2 (12.7)
8 (203.2)
1/2 (12.7)
8 (203.2)
1/2 (12.7)
8 (203.2)
1/2 (12.7)
8 (203.2)
1
1/2 (12.7)
8 (203.2)
(25.4)
1/2 (12.7)
8 (203.2)
3/4
1/2 (12.7)
8 (203.2)
(19.1)
1/2 (12.7)
8 (203.2)
1/2 (12.7)
8 (203.2)
1/2 (12.7)
8 (203.2)
1/2 (12.7)
8 (203.2)
1/2 (12.7)
8 (203.2)
1/2 (12.7)
8 (203.2)
1/2 (12.7)
8 (203.2)
1/2 (12.7)
8 (203.2)
1/2 (12.7)
8 (203.2)
1/2 (12.7)
8 (203.2)
1 (25.4)
3/4 (19.1)
8 (203.2)
1 (25.4)
3/4 (19.1)
8 (203.2)
1 (25.4)
3/4 (19.1)
8 (203.2)
1 (25.4)
3/4 (19.1)
8 (203.2)
1 (25.4)
3/4 (19.1)
8 (203.2)
1 (25.4)
3/4 (19.1)
8 (203.2)
1 (25.4)
3/4 (19.1)
8 (203.2)
1 (25.4)
3/4 (19.1)
8 (203.2)
1 (25.4)
3/4 (19.1)
8 (203.2)
1 (25.4)
3/4 (19.1)
8 (203.2)
1 (25.4)
3/4 (19.1)
8 (203.2)
1 (25.4)
3/4 (19.1)
8 (203.2)
1 (25.4)
3/4 (19.1)
8 (203.2)
1 (25.4)
3/4 (19.1)
8 (203.2)
1 (25.4)
1 (25.4)
8 (203.2)
1 (25.4)
1 (25.4)
8 (203.2)
1 (25.4)
2-62
REV: 04.10.12 mh
4
5
6
7
8
9
10
11
12
13
14
15
16

MATERIAL:
SPECIFICATIONS:
Inch
O.D. Tolerance:
18 to 31 grooves is +.003/-.000 (+0.08/0)
32 to 60 grooves is +.004/-.000 (+0.10/0)
64 & 72 grooves is +.005/-.000 (+0.13/0)
MINIMUM USABLE LENGTH

12
(304.8)
2
O.D. C
INCH COMPONENT
Catalog Number
Steel
Aluminum
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
2-18XL12
2-19XL12
2-20XL12
2-21XL12
2-22XL12
2-23XL12
2-24XL12
2-25XL12
2-26XL12
2-27XL12
2-28XL12
2-29XL12
2-30XL12
2-31XL12
2-32XL12
2-33XL12
2-34XL12
2-35XL12
2-36XL12
2-37XL12
2-38XL12
2-39XL12
2-40XL12
2-41XL12
2-42XL12
2-44XL12
2-45XL12
2-46XL12
2-48XL12
2-50XL12
2-54XL12
2-60XL12
2-64XL12
2-72XL12
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
6C
6C
6C
6C
6C
6C
6C
6C
6C
6C
6C
6C
6C
6C
6C
A 6C
A 6C
A 6C
A
A
A
A
A
6C
6C
6C
6C
6C
A
A
A
A
A
A
6C
6C
6C
6C
6C
6C
2-18XL12
2-19XL12
2-20XL12
2-21XL12
2-22XL12
2-23XL12
2-24XL12
2-25XL12
2-26XL12
2-27XL12
2-28XL12
2-29XL12
2-30XL12
2-31XL12
2-32XL12
2-34XL12
2-36XL12
2-38XL12
2-40XL12
2-41XL12
2-42XL12
2-44XL12
2-45XL12
2-48XL12
2-50XL12
2-54XL12
2-60XL12
2-64XL12
2-72XL12
Inch
Metric
No.
of
Grooves
P.D.
O.D.
P.D.
O.D.
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
44
45
46
48
50
54
60
64
72
1.146
1.210
1.273
1.337
1.401
1.464
1.528
1.592
1.655
1.719
1.783
1.846
1.910
1.974
2.037
2.101
2.165
2.228
2.292
2.355
2.419
2.483
2.546
2.610
2.674
2.801
2.865
2.928
3.056
3.183
3.438
3.820
4.074
4.584
1.126
1.190
1.253
1.317
1.381
1.444
1.508
1.572
1.635
1.699
1.763
1.826
1.890
1.954
2.017
2.081
2.145
2.208
2.272
2.335
2.399
2.463
2.526
2.590
2.654
2.781
2.845
2.908
3.036
3.163
3.418
3.800
4.054
4.564
29.1
30.7
32.3
34
35.6
37.2
38.8
40.4
42
43.7
45.3
46.9
48.5
50.1
51.7
53.4
55
56.6
58.2
59.8
61.4
63.1
64.7
66.3
67.9
71.1
72.8
74.4
77.6
80.9
87.3
97
103.5
116.4
28.6
30.23
31.83
33.45
35.08
36.68
38.3
39.93
41.53
43.15
44.78
46.38
48.01
49.63
51.23
52.86
54.48
56.08
57.71
59.31
60.93
62.56
64.16
65.79
67.41
70.64
72.26
73.86
77.11
80.34
86.82
96.52
102.87
115.93

C
Shank
Dia.
1/2 (12.7)
1/2 (12.7)
1/2 (12.7)
1/2 (12.7)
1/2 (12.7)
1/2 (12.7)
1/2 (12.7)
1/2 (12.7)
1/2 (12.7)
1/2 (12.7)
1/2 (12.7)
1/2 (12.7)
1/2 (12.7)
1/2 (12.7)
1/2 (12.7)
1/2 (12.7)
1/2 (12.7)
1 (25.4)
3/4
(19.1)
1 (25.4)
1 (25.4)
1 (25.4)
E
Shank
Length
4
5
1 (25.4)
3/4
(19.1)
6
7
8
1 (25.4)
1 (25.4)
1 (25.4)
1 (25.4)
1 (25.4)
1 (25.4)
1 (25.4)
1 (25.4)
1 (25.4)
1 (25.4)
1 (25.4)
1 (25.4)
1 (25.4)
1 (25.4)
1 (25.4)
1 (25.4)
1 (25.4)
1 (25.4)
1 (25.4)

and Continued on the next page
9
10
11
12
13
14
15
2-63
16

MATERIAL:
Carbon Steel
SPECIFICATIONS:
Inch
O.D. Tolerance:
10 to 16 grooves is +.002/-.000 (+0.05/0)
17 to 30 grooves is +.003/-.000 (+0.08/0)
32 to 72 grooves is +.004/-.000 (+0.10/0)
O.D. C
3
INCH COMPONENT
4
5
6
7
8
9
10
11
12
13
14
Catalog Number
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
6C
6C
6C
6C
6C
6C
6C
6C
6C
6C
6C
6C
6C
6C
6C
6C
6C
6C
6C
6C
6C
6C
6C
6C
6C
6C
6C
6C
6C
6C
6C
6C
6C
6C
6C
6C
2-64
Metric
P.D.
O.D.
P.D.
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
32
33
34
35
36
38
40
42
44
45
46
48
50
60
72
.637
.700
.764
.828
.891
.955
1.019
1.082
1.146
1.210
1.273
1.337
1.401
1.464
1.528
1.592
1.655
1.719
1.783
1.846
1.910
2.037
2.101
2.165
2.228
2.292
2.419
2.546
2.674
2.801
2.865
2.928
3.056
3.183
3.820
4.584
.617
.680
.744
.808
.871
.935
.999
1.062
1.126
1.190
1.253
1.317
1.381
1.444
1.508
1.572
1.635
1.699
1.763
1.826
1.890
2.017
2.081
2.145
2.208
2.272
2.399
2.526
2.654
2.781
2.845
2.908
3.036
3.163
3.800
4.564
16.2
17.8
19.4
21
22.6
24.3
25.9
27.5
29.1
30.7
32.3
34
35.6
37.2
38.8
40.4
42
43.7
45.3
46.9
48.5
51.7
53.4
55
56.6
58.2
61.4
64.7
67.9
71.1
72.8
74.4
77.6
80.9
97
116.4

15
16
2-10XL06
2-11XL06
2-12XL08
2-13XL08
2-14XL08
2-15XL08
2-16XL08
2-17XL08
2-18XL08
2-19XL08
2-20XL08
2-21XL08
2-22XL08
2-23XL08
2-24XL08
2-25XL08
2-26XL08
2-27XL08
2-28XL08
2-29XL08
2-30XL08
2-32XL08
2-33XL08
2-34XL08
2-35XL08
2-36XL08
2-38XL08
2-40XL08
2-42XL08
2-44XL08
2-45XL08
2-46XL08
2-48XL08
2-50XL08
2-60XL08
2-72XL08
Inch
No.
of
Grooves
O.D.
C
Shank
Dia.
E
Shank
Length
15.67 1/2 (12.7) [7/16 (11.1)] 7/8 (22.3)

17.27
1/2 (12.7)
7/8 (22.3)
18.9
1/2 (12.7)
20.52
1/2 (12.7)
22.12
1/2 (12.7)
23.75
1/2 (12.7)
25.37
1/2 (12.7)
26.98
1/2 (12.7)
28.6
1/2 (12.7)
30.23
1/2 (12.7)
31.83
1/2 (12.7)
33.45
1/2 (12.7)
1
35.08
1/2 (12.7)
(25.4)
36.68
1/2 (12.7)
3/4
38.3
1/2 (12.7)
(19.1)
39.93
1/2 (12.7)
41.53
1/2 (12.7)
43.15
1/2 (12.7)
44.78
1/2 (12.7)
46.38
1/2 (12.7)
49.01
1/2 (12.7)
1 (25.4)
51.23
1/2 (12.7)
1 (25.4)
52.86
1/2 (12.7)
1 (25.4)
54.48
1/2 (12.7)
1 (25.4)
56.08
1 (25.4)
57.71
1 (25.4)
60.93
1 (25.4)
64.16
1
1 (25.4)
67.41
(25.4)
1 (25.4)
70.64
3/4
1 (25.4)
72.26
(19.1)
1 (25.4)
73.86
1 (25.4)
77.11
1 (25.4)
80.34
1 (25.4)
96.52
1 (25.4)
115.93
1 (25.4)
L
Min.
Usable
Length
6 (152.4)
6 (152.4)
8 (203.2)
8 (203.2)
8 (203.2)
8 (203.2)
8 (203.2)
8 (203.2)
8 (203.2)
8 (203.2)
8 (203.2)
8 (203.2)
8 (203.2)
8 (203.2)
8 (203.2)
8 (203.2)
8 (203.2)
8 (203.2)
8 (203.2)
8 (203.2)
8 (203.2)
8 (203.2)
8 (203.2)
8 (203.2)
8 (203.2)
8 (203.2)
8 (203.2)
8 (203.2)
8 (203.2)
8 (203.2)
8 (203.2)
8 (203.2)
8 (203.2)
8 (203.2)
8 (203.2)
8 (203.2)
XL TIMING BELT PULLEYS 1/5" PITCH

FOR 1/4" BELTS

DOUBLE FLANGE
R
Inch
MATERIAL:
Aluminum Alloy
FINISH:
Clear Anodized
SPECIFICATIONS:
O.D. Tolerance: 10 to 16 grooves is +.002/-.000

18 to 30 grooves is +.003/-.000
Pulleys with 10 & 11 grooves have 1 set screw;
others have 2 set screws at 90.
E
7/16
D
D/2
SET
SCREW
F.D. O.D.
B C
.31
INCH COMPONENT
Catalog Number
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
3-10DF02506
3-11DF02506
3-11DF02508
3-12DF02506
3-12DF02508
3-13DF02508
3-14DF02508
3-14DF02510
3-15DF02508
3-15DF02510
3-16DF02508
3-16DF02510
3-18DF02508
3-18DF02510
3-20DF02508
3-20DF02510
3-21DF02508
3-21DF02510
3-22DF02508
3-22DF02512
3-24DF02508
3-24DF02510
3-24DF02512
3-26DF02508
3-26DF02512
3-28DF02508
3-28DF02512
3-30DF02508
3-30DF02512
No.
of
Grooves
P.D.
10
11
11
12
12
13
14
14
15
15
16
16
18
18
20
20
21
21
22
22
24
24
24
26
26
28
28
30
30
.637
.700
.700
.764
.764
.828
.891
.891
.955
.955
1.019
1.019
1.146
1.146
1.273
1.273
1.337
1.337
1.401
1.401
1.528
1.528
1.528
1.655
1.655
1.783
1.783
1.910
1.910
O.D.
.617
.680
.680
.744
.744
.808
.871
.871
.935
.935
.999
.999
1.126
1.126
1.253
1.253
1.317
1.317
1.381
1.381
1.508
1.508
1.508
1.635
1.635
1.763
1.763
1.890
1.890
F.D.
1/64
7/8
15/16
15/16
1
1
1-1/16
1-3/32
1-3/32
1-3/16
1-3/16
1-1/4
1-1/4
1-3/8
1-3/8
1-1/2
1-1/2
1-9/16
1-9/16
1-5/8
1-5/8
1-3/4
1-3/4
1-3/4
1-7/8
1-7/8
2
2
2-1/8
2-1/8
B
Bore
+.001
-.000
.1875
.1875
.250
.1875
.250
.250
.250
.3125
.250
.3125
.250
.3125
.250
.3125
.250
.3125
.250
.3125
.250
.375
.250
.3125
.375
.250
.375
.250
.375
.250
.375
E
Length
C
Hub
Dia.
1/64
1/64
D
Hub
Proj.
11/16
11/16
11/16
11/16
11/16
11/16
11/16
11/16
11/16
11/16
11/16
11/16
11/16
11/16
3/4
3/4
3/4
3/4
3/4
3/4
25/32
25/32
25/32
25/32
25/32
25/32
25/32
25/32
25/32
3/8
7/16
7/16
1/2
1/2
9/16
9/16
9/16
5/8
5/8
11/16
11/16
13/16
13/16
15/16
15/16
1
1
1
1
1-1/16
1-1/16
1-1/16
1-3/16
1-3/16
1-3/16
1-3/16
1-5/16
1-5/16
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
5/16
5/16
5/16
5/16
5/16
5/16
11/32
11/32
11/32
11/32
11/32
11/32
11/32
11/32
11/32
Set
Screw
#6-40
#6-40
#8-32
#6-40
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#10-32
#8-32
#8-32
#10-32
#8-32
#10-32
#8-32
#10-32
#8-32
#10-32
6
7
8
9
10
11
12
13
14
15
2-65
16
I
R

FOR 3/8" BELTS

DOUBLE FLANGE
Inch
MATERIAL:
Aluminum Alloy
FINISH:
Clear Anodized
SPECIFICATIONS:

17 to 20 grooves is +.003/-.000

E
9/16
INCH COMPONENT
Catalog Number
8
9
10
11
12
13
SET
SCREW
B C
F.D. O.D.
D
D/2
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
3-10DF03706
3-10DF03708
3-11DF03706
3-11DF03708
3-12DF03706
3-12DF03708
3-12DF03710
3-13DF03708
3-14DF03708
3-14DF03710
3-15DF03708
3-15DF03710
3-15DF03712
3-15DF03716
3-16DF03708
3-16DF03710
3-16DF03712
3-17DF03708
3-18DF03708
3-18DF03710
3-18DF03712
3-19DF03708
3-20DF03708
3-20DF03710
3-20DF03712
3-20DF03716
.43
No.
of
Grooves
P.D.
O.D.
10
10
11
11
12
12
12
13
14
14
15
15
15
15
16
16
16
17
18
18
18
19
20
20
20
20
.637
.637
.700
.700
.764
.764
.764
.828
.891
.891
.955
.955
.955
.955
1.019
1.019
1.019
1.082
1.146
1.146
1.146
1.210
1.273
1.273
1.273
1.273
.617
.617
.680
.680
.744
.744
.744
.808
.871
.871
.935
.935
.935
.935
.999
.999
.999
1.062
1.126
1.126
1.126
1.190
1.253
1.253
1.253
1.253
F.D.
1/64
7/8
7/8
15/16
15/16
1
1
1
1-1/16
1-3/32
1-3/32
1-3/16
1-3/16
1-3/16
1-3/16
1-1/4
1-1/4
1-1/4
1-5/16
1-3/8
1-3/8
1-3/8
1-7/16
1-1/2
1-1/2
1-1/2
1-1/2
B
Bore
+.001
-.000
.1875
.250
.1875
.250
.1875
.250
.3125
.250
.250
.3125
.250
.3125
.375
.500
.250
.3125
.375
.250
.250
.3125
.375
.250
.250
.3125
.375
.500
1/64
C
Hub
Dia.
1/64
D
Hub
Proj.
Set
Screw
13/16
13/16
13/16
13/16
13/16
13/16
13/16
13/16
13/16
13/16
13/16
13/16
13/16
13/16
13/16
13/16
13/16
13/16
13/16
13/16
13/16
13/16
7/8
7/8
7/8
7/8
7/16
7/16
1/2
1/2
1/2
1/2
1/2
9/16
9/16
9/16
5/8
5/8
3/4
3/4
11/16
11/16
11/16
3/4
13/16
13/16
13/16
7/8
15/16
15/16
15/16
15/16
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
5/16
5/16
5/16
5/16
#6-40
#8-32
#6-40
#8-32
#6-40
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#10-32
#10-32
E
Length
14
15
16
2-66

FOR 3/8" BELTS

DOUBLE FLANGE
R
Inch
MATERIAL:
Aluminum Alloy
FINISH:
Clear Anodized
SPECIFICATIONS:

32 grooves is +.004/-.000
E
9/16
D
D/2
B C
F.D. O.D.
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
3-21DF03708
3-21DF03710
3-21DF03712
3-22DF03708
3-22DF03710
3-22DF03712
3-23DF03708
3-24DF03708
3-24DF03710
3-24DF03712
3-24DF03716
3-25DF03708
3-25DF03712
3-26DF03708
3-26DF03712
3-28DF03708
3-28DF03710
3-28DF03712
3-30DF03708
3-30DF03710
3-30DF03712
3-30DF03716
3-32DF03712
.43
INCH COMPONENT
Catalog Number
SET
SCREW
No.
of
Grooves
P.D.
21
21
21
22
22
22
23
24
24
24
24
25
25
26
26
28
28
28
30
30
30
30
32
1.337
1.337
1.337
1.401
1.401
1.401
1.464
1.528
1.528
1.528
1.528
1.592
1.592
1.655
1.655
1.783
1.783
1.783
1.910
1.910
1.910
1.910
2.037
O.D.
1.317
1.317
1.317
1.381
1.381
1.381
1.444
1.508
1.508
1.508
1.508
1.572
1.572
1.635
1.635
1.763
1.763
1.763
1.890
1.890
1.890
1.890
2.017
F.D.
1/64
1-9/16
1-9/16
1-9/16
1-5/8
1-5/8
1-5/8
1-11/16
1-3/4
1-3/4
1-3/4
1-3/4
1-13/16
1-13/16
1-7/8
1-7/8
2
2
2
2-1/8
2-1/8
2-1/8
2-1/8
2-1/4
B
Bore
+.001
-.000
.250
.3125
.375
.250
.3125
.375
.250
.250
.3125
.375
.500
.250
.375
.250
.375
.250
.3125
.375
.250
.3125
.375
.500
.375
1/64
C
Hub
Dia.
1/64
D
Hub
Proj.
Set
Screw
7/8
7/8
7/8
7/8
7/8
7/8
7/8
29/32
29/32
29/32
29/32
29/32
29/32
29/32
29/32
29/32
29/32
29/32
29/32
29/32
29/32
29/32
29/32
1
1
1
1
1
1
1-1/16
1-1/16
1-1/16
1-1/16
1-1/16
1-3/32
1-3/32
1-3/16
1-3/16
1-3/16
1-3/16
1-3/16
1-5/16
1-5/16
1-5/16
1-5/16
1-7/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
11/32
11/32
11/32
11/32
11/32
11/32
11/32
11/32
11/32
11/32
11/32
11/32
11/32
11/32
11/32
11/32
#8-32
#8-32
#10-32
#8-32
#8-32
#10-32
#8-32
#8-32
#8-32
#10-32
#10-32
#8-32
#10-32
#8-32
#10-32
#8-32
#8-32
#10-32
#8-32
#8-32
#10-32
#10-32
#10-32
E
Length
6
7
8
9
10
11
12
13
14
15
2-67
16
I
R
T

HUBLESS
DOUBLE FLANGE
Inch
MATERIAL:
Aluminum Alloy
FINISH:
Clear Anodized
SPECIFICATIONS:
2
3

18 to 30 grooves is +.003/-.000
32 grooves is +.004/-.000
Pulleys with 10, 11 & 12 grooves have 1 set screw;
SET SCREWS
BETWEEN TEETH
(see note)
9/16
F.D. O.D.
5
6
Catalog Number
7
8
9
10
11
12
13
14
15
16
.43
INCH COMPONENT
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
3-10H3706
3-10H3708
3-11H3706
3-11H3708
3-12H3706
3-12H3708
3-14H3708
3-14H3710
3-14H3712
3-15H3708
3-15H3710
3-16H3708
3-16H3710
3-18H3708
3-18H3710
3-18H3716
3-20H3708
3-20H3710
3-20H3712
3-21H3708
3-21H3710
3-22H3708
3-22H3710
3-24H3708
3-24H3710
3-24H3712
3-28H3708
3-28H3712
3-30H3708
3-30H3712
3-32H3710
3-32H3712
2-68
No.
of
Grooves
P.D.
O.D.
10
10
11
11
12
12
14
14
14
15
15
16
16
18
18
18
20
20
20
21
21
22
22
24
24
24
28
28
30
30
32
32
.637
.637
.701
.701
.764
.764
.891
.891
.891
.955
.955
1.019
1.019
1.146
1.146
1.146
1.273
1.273
1.273
1.337
1.337
1.401
1.401
1.528
1.528
1.528
1.783
1.783
1.910
1.910
2.037
2.037
.617
.617
.680
.680
.744
.744
.871
.871
.871
.935
.935
.999
.999
1.126
1.126
1.126
1.253
1.253
1.253
1.317
1.317
1.381
1.381
1.508
1.508
1.508
1.763
1.763
1.890
1.890
2.017
2.017
F.D.
1/64
7/8
7/8
15/16
15/16
1
1
1-3/32
1-3/32
1-3/32
1-3/16
1-3/16
1-1/4
1-1/4
1-3/8
1-3/8
1-3/8
1-1/2
1-1/2
1-1/2
1-9/16
1-9/16
1-5/8
1-5/8
1-3/4
1-3/4
1-3/4
2
2
2-1/8
2-1/8
2-1/4
2-1/4
B
Bore
+.001
-.000
.1875
.250
.1875
.250
.1875
.250
.250
.3125
.375
.250
.3125
.250
.3125
.250
.3125
.500
.250
.3125
.375
.250
.3125
.250
.3125
.250
.3125
.375
.250
.375
.250
.375
.3125
.375
Set
Screw
#6-32
#6-32
#6-32
#6-32
#6-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32

FOR 3/8" BELTS

NO FLANGE
R
Inch
MATERIAL:
Aluminum Alloy
FINISH:
Clear Anodized
SPECIFICATIONS:

17 to 25 grooves is +.003/-.000

E
9/16
D/2
D
SET SCREW
O.D.
B C
5
INCH COMPONENT
Catalog Number
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
3-10NF03706
3-10NF03708
3-11NF03706
3-11NF03708
3-12NF03706
3-12NF03708
3-14NF03708
3-14NF03710
3-15NF03708
3-15NF03710
3-15NF03712
3-16NF03708
3-16NF03710
3-17NF03708
3-18NF03708
3-18NF03710
3-18NF03712
3-19NF03708
3-20NF03708
3-20NF03710
3-20NF03712
3-21NF03708
3-21NF03710
3-22NF03708
3-22NF03710
3-22NF03712
3-23NF03708
3-24NF03708
3-24NF03710
3-24NF03712
3-25NF03708
3-25NF03712
No.
of
Grooves
P.D.
O.D.
10
10
11
11
12
12
14
14
15
15
15
16
16
17
18
18
18
19
20
20
20
21
21
22
22
22
23
24
24
24
25
25
.637
.637
.700
.700
.764
.764
.891
.891
.955
.955
.955
1.019
1.019
1.082
1.146
1.146
1.146
1.210
1.273
1.273
1.273
1.337
1.337
1.401
1.401
1.401
1.464
1.528
1.528
1.528
1.592
1.592
.617
.617
.680
.680
.744
.744
.871
.871
.935
.935
.935
.999
.999
1.062
1.126
1.126
1.126
1.190
1.253
1.253
1.253
1.317
1.317
1.381
1.381
1.381
1.444
1.508
1.508
1.508
1.572
1.572
B
Bore
+.001
-.000
.1875
.250
.1875
.250
.1875
.250
.250
.3125
.250
.3125
.375
.250
.3125
.250
.250
.3125
.375
.250
.250
.3125
.375
.250
.3125
.250
.3125
.375
.250
.250
.3125
.375
.250
.375
E
Length
1/64
13/16
13/16
13/16
13/16
13/16
13/16
13/16
13/16
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
15/16
15/16
15/16
15/16
15/16
15/16
15/16
15/16
15/16
15/16
15/16
15/16
15/16
15/16
C
Hub
Dia.
1/64
7/16
7/16
1/2
1/2
9/16
9/16
5/8
5/8
11/16
11/16
11/16
3/4
3/4
13/16
7/8
7/8
7/8
7/8
15/16
15/16
15/16
1
1
1-1/16
1-1/16
1-1/16
1-1/8
1-3/16
1-3/16
1-3/16
1-1/4
1-1/4
D
Hub
Proj.
Set
Screw
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
#6-40
#8-32
#6-40
#8-32
#6-40
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#10-32
#8-32
#8-32
#8-32
#8-32
#10-32
#8-32
#8-32
#8-32
#10-32
#8-32
#10-32
6
7
8
9
10
11
12
13
14
15
2-69
16
I
R

FOR 3/8" BELTS
NO FLANGE
Inch
MATERIAL:
Aluminum Alloy
0
E
9/16
FINISH:
Clear Anodized
1
2
SPECIFICATIONS:
9/16

32 to 60 grooves is +.004/-.000
72 grooves is +.005/-.000
4
5
6
7
8
9
10
11
12
13
14
15
Catalog Number
Fig. 1
A
A
A
A
A
A
A
A
A
A
A
A
A
A
Fig. 2
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
SET
SCREW
B C
O.D.
P.D.
O.D.
B
Bore
+.001
-.000
B C
Fig. 2
Fig. 1
No.
of
Grooves
SET
SCREW
D
D/2
INCH COMPONENT
D/2
O.D.
E
Length
C
Hub
Dia.
1/64
1/64
D
Hub
Proj.
Set
Screw
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
3-27NF03710
3-28NF03708
3-28NF03710
3-28NF03712
3-29NF03710
3-30NF03708
3-30NF03710
3-30NF03712
3-32NF03710
3-32NF03712
3-32NF03716
3-36NF03710
3-36NF03712
3-36NF03716
27
28
28
28
29
30
30
30
32
32
32
36
36
36
1.719
1.783
1.783
1.783
1.846
1.910
1.910
1.910
2.037
2.037
2.037
2.292
2.292
2.292
1.699
1.763
1.763
1.763
1.826
1.890
1.890
1.890
2.017
2.017
2.017
2.272
2.272
2.272
.3125
.250
.3125
.375
.3125
.250
.3125
.375
.3125
.375
.500
.3125
.375
.500
15/16
15/16
15/16
15/16
15/16
15/16
15/16
15/16
1
1
1
1
1
1
1-1/4
1-1/4
1-1/4
1-1/4
1-5/16
1-3/8
1-3/8
1-3/8
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
7/16
7/16
7/16
7/16
7/16
7/16
#8-32
#8-32
#8-32
#10-32
#8-32
#8-32
#8-32
#10-32
#8-32
#10-32
1/4-20
#8-32
#10-32
1/4-20
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
3-40NF03710
3-40NF03712
3-40NF03716
3-42NF03710
3-42NF03712
3-42NF03716
3-44NF03710
3-44NF03712
3-44NF03716
3-45NF03710
3-45NF03712
3-45NF03716
3-48NF03710
3-48NF03712
3-48NF03716
3-50NF03710
3-50NF03712
3-50NF03716
3-60NF03712
3-60NF03716
3-72NF03712
3-72NF03716
40
40
40
42
42
42
44
44
44
45
45
45
48
48
48
50
50
50
60
60
72
72
2.546
2.546
2.546
2.674
2.674
2.674
2.801
2.801
2.801
2.865
2.865
2.865
3.056
3.056
3.056
3.183
3.183
3.183
3.820
3.820
4.584
4.584
2.526
2.526
2.526
2.654
2.654
2.654
2.781
2.781
2.781
2.845
2.845
2.845
3.036
3.036
3.036
3.163
3.163
3.163
3.800
3.800
4.564
4.564
.3125
.375
.500
.3125
.375
.500
.3125
.375
.500
.3125
.375
.500
.3125
.375
.500
.3125
.375
.500
.375
.500
.375
.500
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
7/16
7/16
7/16
7/16
7/16
7/16
7/16
7/16
7/16
7/16
7/16
7/16
7/16
7/16
7/16
7/16
7/16
7/16
7/16
7/16
7/16
7/16
#8-32
#10-32
1/4-20
#8-32
#10-32
1/4-20
#8-32
#10-32
1/4-20
#8-32
#10-32
1/4-20
#8-32
#10-32
1/4-20
#8-32
#10-32
1/4-20
#10-32
1/4-20
#10-32
1/4-20
16
2-70
XL TIMING BELT PULLEY 1/5" PITCH

FOR 3/8" BELTS
DOUBLE OR NO FLANGE
MINIMUM BORE
R
Inch
MATERIAL:
Aluminum Alloy
SPECIFICATION:
1
2
E
9/16
D
D/2
F.D. O.D.
B C
9/16
E
D/2
O.D.
B C
SET
SCREW
SET
SCREW
Fig. 1
Fig. 2
INCH COMPONENT
Catalog Number *
No.
of
Grooves
P.D.
O.D.
F.D.
B
Bore
E
Length
C
Hub
Dia.
D
Hub
Proj.
Set
Screw
Fig. 1
Fig. 2
A
A
A
A
6A
6A
6A
6A
3-11DFB37
3-21DFB37
3-22DFB37
3-28DFB37
11
21
22
28
.700
1.337
1.401
1.783
.680
1.317
1.381
1.763
15/16
1-9/16
1-5/8
2
3/16
1/4
1/4
1/4
13/16
29/32
29/32
29/32
7/16
15/16
1
1-3/16
1/4
11/32
11/32
11/32
#6-40
#8-32
#10-32
#10-32
A
A
A
A
A
A
6A
6A
6A
6A
6A
6A
3-32NFB37
3-36NFB37
3-40NFB37
3-42NFB37
3-44NFB37
3-48NFB37
32
36
40
42
44
48
2.037
2.292
2.546
2.674
2.801
3.056
2.017
2.272
2.526
2.654
2.781
3.036
5/16
5/16
5/16
5/16
5/16
5/16
1
1
1
1
1
1
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
7/16
7/16
7/16
7/16
7/16
7/16
#10-32
#10-32
#10-32
#10-32
#10-32
#10-32
6
7
8
9
10
11
12
13
14
15
2-71
16
I
R

FOR 3/8" BELTS
DOUBLE FLANGE
Inch
MATERIAL:
Steel
FINISH:
Black Oxide
SPECIFICATIONS:

18 & 20 grooves is +.003/-.000

E
35/64
INCH COMPONENT
Catalog Number
8
9
10
11
12
SET
SCREW
F.D. O.D.
D
D/2
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
6C
6C
6C
6C
6C
6C
6C
6C
6C
6C
6C
6C
6C
6C
6C
6C
6C
6C
6C
6C
6C
6C
3-10DF03706
3-10DF03708
3-11DF03706
3-11DF03708
3-12DF03706
3-12DF03708
3-12DF03710
3-14DF03708
3-14DF03710
3-15DF03708
3-15DF03710
3-15DF03712
3-15DF03716
3-16DF03708
3-16DF03710
3-18DF03708
3-18DF03710
3-18DF03712
3-20DF03708
3-20DF03710
3-20DF03712
3-20DF03716
B C
.43
No.
of
Grooves
P.D.
O.D.
F.D.
B
Bore
10
10
11
11
12
12
12
14
14
15
15
15
15
16
16
18
18
18
20
20
20
20
.637
.637
.700
.700
.764
.764
.764
.891
.891
.955
.955
.955
.955
1.019
1.019
1.146
1.146
1.146
1.273
1.273
1.273
1.273
.617
.617
.680
.680
.744
.744
.744
.871
.871
.935
.935
.935
.935
.999
.999
1.126
1.126
1.126
1.253
1.253
1.253
1.253
7/8
7/8
15/16
15/16
1
1
1
1-3/32
1-3/32
1-3/16
1-3/16
1-3/16
1-3/16
1-1/4
1-1/4
1-3/8
1-3/8
1-3/8
1-1/2
1-1/2
1-1/2
1-1/2
.1875
.250
.1875
.250
.1875
.250
.3125
.250
.3125
.250
.3125
.375
.500
.250
.3125
.250
.3125
.375
.250
.3125
.375
.500
+.001
-.000
E
Length
C
Hub
Dia.
1/64
1/64
D
Hub
Proj.
13/16
13/16
13/16
13/16
13/16
13/16
13/16
13/16
13/16
13/16
13/16
13/16
13/16
13/16
13/16
13/16
13/16
13/16
7/8
7/8
7/8
7/8
7/16
7/16
1/2
1/2
1/2
1/2
1/2
9/16
9/16
5/8
5/8
3/4
3/4
11/16
11/16
13/16
13/16
13/16
15/16
15/16
15/16
15/16
17/64
17/64
17/64
17/64
17/64
17/64
17/64
17/64
17/64
17/64
17/64
17/64
17/64
17/64
17/64
17/64
17/64
17/64
21/64
21/64
21/64
21/64
Set
Screw
#6-40
#8-32
#6-40
#8-32
#6-40
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#10-32
#10-32
13
14
15
16
2-72

FOR 3/8" BELTS
DOUBLE FLANGE
R
Inch
MATERIAL:
Steel
FINISH:
Black Oxide
SPECIFICATIONS:

32 grooves is +.004/-.000
E
35/64
D
D/2
F.D. O.D.
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
6C
6C
6C
6C
6C
6C
6C
6C
6C
6C
6C
6C
6C
6C
6C
6C
6C
6C
6C
3-21DF03708
3-21DF03710
3-22DF03708
3-22DF03710
3-22DF03712
3-24DF03708
3-24DF03710
3-24DF03712
3-24DF03716
3-25DF03708
3-25DF03712
3-28DF03708
3-28DF03710
3-28DF03712
3-30DF03708
3-30DF03710
3-30DF03712
3-30DF03716
3-32DF03712
B C
.43
INCH COMPONENT
Catalog Number
SET
SCREW
No.
of
Grooves
P.D.
21
21
22
22
22
24
24
24
24
25
25
28
28
28
30
30
30
30
32
1.337
1.337
1.401
1.401
1.401
1.528
1.528
1.528
1.528
1.592
1.592
1.783
1.783
1.783
1.910
1.910
1.910
1.910
2.037
O.D.
1.317
1.317
1.381
1.381
1.381
1.508
1.508
1.508
1.508
1.572
1.572
1.763
1.763
1.763
1.890
1.890
1.890
1.890
2.017
F.D.
1-9/16
1-9/16
1-5/8
1-5/8
1-5/8
1-3/4
1-3/4
1-3/4
1-3/4
1-13/16
1-13/16
2
2
2
2-1/8
2-1/8
2-1/8
2-1/8
2-1/4
B
Bore
+.001
-.000
.250
.3125
.250
.3125
.375
.250
.3125
.375
.500
.250
.375
.250
.3125
.375
.250
.3125
.375
.500
.375
E
Length
C
Hub
Dia.
1/64
1/64
D
Hub
Proj.
7/8
7/8
7/8
7/8
7/8
29/32
29/32
29/32
29/32
29/32
29/32
29/32
29/32
29/32
29/32
29/32
29/32
29/32
29/32
1
1
1
1
1
1-1/16
1-1/16
1-1/16
1-1/16
1-3/32
1-3/32
1-3/16
1-3/16
1-3/16
1-5/16
1-5/16
1-5/16
1-5/16
1-7/16
21/64
21/64
21/64
21/64
21/64
23/64
23/64
23/64
23/64
23/64
23/64
23/64
23/64
23/64
23/64
23/64
23/64
23/64
23/64
Set
Screw
#8-32
#8-32
#8-32
#8-32
#10-32
#8-32
#8-32
#10-32
#10-32
#8-32
#10-32
#8-32
#8-32
#10-32
#8-32
#8-32
#10-32
#10-32
#10-32
6
7
8
9
10
11
12
13
14
15
2-73
16
I
R
T

HUBLESS
DOUBLE FLANGE
Inch
MATERIAL:
Steel
FINISH:
Black Oxide
SPECIFICATIONS:
2
3

18 to 30 grooves is +.003/-.000
32 grooves is +.004/-.000
F.D. O.D.
4
5
6
7
8
9
10
11
12
13
14
Catalog Number
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
6C
6C
6C
6C
6C
6C
6C
6C
6C
6C
6C
6C
6C
6C
6C
6C
6C
6C
6C
6C
6C
6C
6C
6C
6C
6C
6C
6C
6C
3-10H3706
3-10H3708
3-11H3706
3-11H3708
3-12H3706
3-12H3708
3-14H3708
3-15H3708
3-15H3710
3-16H3708
3-16H3710
3-18H3708
3-18H3710
3-20H3708
3-20H3710
3-20H3712
3-21H3708
3-21H3710
3-22H3708
3-22H3710
3-24H3708
3-24H3710
3-24H3712
3-28H3708
3-28H3712
3-30H3708
3-30H3712
3-32H3710
3-32H3712
2-74
.43
INCH COMPONENT
15
16
SET SCREWS
BETWEEN TEETH
(see note)
35/64
Pulleys with 10 to 12 grooves have 1 set screw;

No.
of
Grooves
P.D.
O.D.
F.D.
10
10
11
11
12
12
14
15
15
16
16
18
18
20
20
20
21
21
22
22
24
24
24
28
28
30
30
32
32
.637
.637
.700
.700
.764
.764
.891
.955
.955
1.019
1.019
1.146
1.146
1.273
1.273
1.273
1.337
1.337
1.401
1.401
1.528
1.528
1.528
1.783
1.783
1.910
1.910
2.037
2.037
.617
.617
.680
.680
.744
.744
.871
.935
.935
.999
.999
1.126
1.126
1.253
1.253
1.253
1.317
1.317
1.381
1.381
1.508
1.508
1.508
1.763
1.763
1.890
1.890
2.017
2.017
7/8
7/8
15/16
15/16
1
1
1-3/32
1-3/16
1-3/16
1-1/4
1-1/4
1-3/8
1-3/8
1-1/2
1-1/2
1-1/2
1-9/16
1-9/16
1-5/8
1-5/8
1-3/4
1-3/4
1-3/4
2
2
2-1/8
2-1/8
2-1/4
2-1/4
B
Bore
+.001
-.000
.1875
.250
.1875
.250
.1875
.250
.250
.250
.3125
.250
.3125
.250
.3125
.250
.3125
.375
.250
.3125
.250
.3125
.250
.3125
.375
.250
.375
.250
.375
.3125
.375
Set
Screw
#6-32
#6-32
#6-32
#6-32
#6-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32

R
Inch
0
HERES HOW IT WORKS:
T
1
2
3


SOLID HINGE
PORTION
HUB
FEATURES:

FRONT

TRANSVERSE
SLOT
RADIAL SLOT
BACK
Fairloc Hub Pulleys

Pitch
Page #
.080
1/5
3 mm HTD
5 mm HTD
2 mm GT2
3 mm GT2
2-27
2-76
2-121
2-147
2-167
2-185
9
10
11
Legend
Fastening Method
Clamps
Yes
No
No
Yes
No
*Fairloc
Yes
Yes
Yes
Yes
Yes
B Self-contained
Keys
No
No
No
No
No
Pins
No
No
No
No
Yes
D Easy adjustment
Set Screws
No
No
No
No
Yes
12
13
* Patented
14
15
2-75
16
I
R
T
1

FOR 3/8" BELTS

MOLDED WITH FAIRLOC HUB
DOUBLE FLANGE
Inch
MATERIAL:

Hub - Aluminum Alloy, Overmolded
SPECIFICATION:
Pulleys with 10 to 21 grooves do not have webs.
13/16
1/4
3/16
3
4
O.D. A
1/16
CAP SCREW
F.D.
5
7/16
6
7
8
9
10
11
12
13
14
15
16
INCH COMPONENT
Catalog Number
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
6H
6H
6H
6H
6H
6H
6H
6H
6H
6H
6H
6H
6H
6H
6H
6H
6H
6H
6H
6H
6H
6H
6H
6H
6H
6H
6H
6H
6H
6H
6H
6H
3-10DF03706
3-11DF03706
3-12DF03706
3-13DF03706
3-14DF03708
3-15DF03708
3-16DF03708
3-17DF03708
3-18DF03708
3-19DF03708
3-20DF03708
3-21DF03708
3-22DF03708
3-23DF03708
3-24DF03708
3-25DF03708
3-26DF03708
3-27DF03708
3-28DF03708
3-29DF03708
3-30DF03710
3-31DF03710
3-32DF03710
3-34DF03710
3-35DF03710
3-36DF03710
3-37DF03710
3-39DF03710
3-40DF03710
3-42DF03710
3-44DF03710
3-48DF03710
2-76
No.
of
Grooves
P.D.
O.D.
F.D.
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
34
35
36
37
39
40
42
44
48
.637
.700
.764
.828
.891
.955
1.019
1.082
1.146
1.210
1.273
1.337
1.401
1.464
1.528
1.592
1.655
1.719
1.783
1.846
1.910
1.974
2.037
2.165
2.228
2.292
2.355
2.483
2.546
2.674
2.801
3.056
.617
.680
.744
.808
.871
.935
.999
1.062
1.126
1.190
1.253
1.317
1.381
1.444
1.508
1.572
1.635
1.699
1.763
1.826
1.890
1.954
2.017
2.145
2.208
2.272
2.335
2.463
2.526
2.654
2.781
3.036
.87
.93
.99
1.06
1.12
1.19
1.24
1.31
1.38
1.44
1.51
1.57
1.63
1.69
1.76
1.82
1.89
1.95
2.02
2.08
2.14
2.20
2.27
2.40
2.46
2.53
2.59
2.71
2.78
2.92
3.04
3.29
B
Bore
+.001
-.000
.1875
.1875
.1875
.1875
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
.3125
.3125
.3125
.3125
.3125
.3125
.3125
.3125
.3125
.3125
.3125
.3125
A
Dia.
C
Hub
Dia.
Cap
Screw
3/8
3/8
3/8
3/8
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
1/2
1/2
1/2
1/2
3/4
3/4
3/4
3/4
3/4
3/4
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
#2-56
#2-56
#2-56
#2-56
#4-40
#4-40
#4-40
#4-40
#4-40
#4-40
#4-40
#4-40
#4-40
#4-40
#4-40
#4-40
#4-40
#4-40
#4-40
#4-40
#4-40
#4-40
#4-40
#4-40
#4-40
#4-40
#4-40
#4-40
#4-40
#4-40
#4-40
#4-40

FOR 3/8" BELTS

SINGLE OR NO FLANGE
R
Inch
MATERIAL:

SPECIFICATION:

E
3/16
D
3/16
O.D. A B
INSERT IS FLUSH
ON PULLEY WITH
58 GROOVES
INCH COMPONENT
Catalog Number
A 6H 3-10SF03706
A 6H 3-11SF03706
A 6H 3-12SF03706
A 6H 3-13SF03706
A 6H 3-14SF03708
A 6H 3-15SF03708
A 6H 3-16SF03708
A 6H 3-17SF03708
A 6H 3-18SF03708
A 6H 3-19SF03708
A 6H 3-20SF03708
A 6H 3-21SF03708
A 6H 3-22SF03708
A 6H 3-23SF03708
A 6H 3-24SF03708
A 6H 3-25SF03708
A 6H 3-26SF03708
A 6H 3-27SF03708
A 6H 3-28SF03708
A 6H 3-29SF03708
A 6H 3-30SF03710
A 6H 3-31SF03710
A 6H 3-32SF03710
A 6H 3-34SF03710
A 6H 3-35SF03710
A 6H 3-36SF03710
A 6H 3-37SF03710
A 6H 3-39SF03710
A 6H 3-40SF03710
A 6H 3-42SF03710
A 6H 3-44SF03710
A 6H 3-48SF03710
A 6H 3-58SF03712
Fig. 2 No Flange
A 6H 3-60NF03712
A 6H 3-72NF03712
CAP
1/16 SCREW
C F.D.
E
D
O.D. A B
CAP
SCREW
3
4
7/16
1/2
Fig. 1
Fig. 2
B
Bore
No.
P.D.
of
Grooves
O.D.
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
34
35
36
37
39
40
42
44
48
58
.637
.700
.764
.828
.891
.955
1.019
1.082
1.146
1.210
1.273
1.337
1.401
1.464
1.528
1.592
1.655
1.719
1.783
1.846
1.910
1.974
2.037
2.165
2.228
2.292
2.355
2.483
2.546
2.674
2.801
3.056
3.692
.617
.680
.744
.808
.871
.935
.999
1.062
1.126
1.190
1.253
1.317
1.381
1.444
1.508
1.572
1.635
1.699
1.763
1.826
1.890
1.954
2.017
2.145
2.208
2.272
2.335
2.463
2.526
2.654
2.781
3.036
3.672
.87
.93
.99
1.06
1.12
1.19
1.24
1.31
1.38
1.44
1.51
1.57
1.63
1.69
1.76
1.82
1.89
1.95
2.02
2.08
2.14
2.20
2.27
2.40
2.46
2.53
2.59
2.71
2.78
2.92
3.04
3.29
3.92
.1875
.1875
.1875
.1875
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
.3125
.3125
.3125
.3125
.3125
.3125
.3125
.3125
.3125
.3125
.3125
.3125
.375
60
72
3.820
4.584
3.800
4.564
.375
.375
F.D.
A
Dia.
C
Hub
Dia.
D
Cap
Hub Screw
Proj.
13/16
13/16
13/16
13/16
13/16
13/16
13/16
13/16
13/16
13/16
13/16
13/16
13/16
13/16
13/16
13/16
13/16
13/16
13/16
13/16
13/16
13/16
13/16
13/16
13/16
13/16
13/16
13/16
13/16
13/16
13/16
13/16
13/16
3/8
3/8
3/8
3/8
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
1/2
1/2
1/2
1/2
3/4
3/4
3/4
3/4
3/4
3/4
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
1-1/32
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
5/16
#2-56
#2-56
#2-56
#2-56
#4-40
#4-40
#4-40
#4-40
#4-40
#4-40
#4-40
#4-40
#4-40
#4-40
#4-40
#4-40
#4-40
#4-40
#4-40
#4-40
#4-40
#4-40
#4-40
#4-40
#4-40
#4-40
#4-40
#4-40
#4-40
#4-40
#4-40
#4-40
#6-32
7/8
7/8
5/8
5/8
1-1/32
1-1/32
3/8
3/8
#8-32
#8-32
E
+.001 Length
-.000
2-77
5
6
7
8
9
10
11
12
13
14
15
16
I
R
T
1

FOR 3/8" BELTS

DOUBLE FLANGE
Inch
MATERIAL:

SPECIFICATION:
13/16
1/16
O.D. A
8
9
10
11
12
13
14
15
16
B C F.D.
3/16
7/16
INCH COMPONENT
Catalog Number
1/4
1/8
SET
SCREW
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
6J
6J
6J
6J
6J
6J
6J
6J
6J
6J
6J
6J
6J
6J
6J
6J
6J
6J
6J
6J
6J
6J
6J
6J
6J
6J
6J
6J
6J
6J
6J
6J
3-10DF03706
3-11DF03706
3-12DF03706
3-13DF03706
3-14DF03708
3-15DF03708
3-16DF03708
3-17DF03708
3-18DF03708
3-19DF03708
3-20DF03708
3-21DF03708
3-22DF03708
3-23DF03708
3-24DF03708
3-25DF03708
3-26DF03708
3-27DF03708
3-28DF03708
3-29DF03708
3-30DF03710
3-31DF03710
3-32DF03710
3-34DF03710
3-35DF03710
3-36DF03710
3-37DF03710
3-39DF03710
3-40DF03710
3-42DF03710
3-44DF03710
3-48DF03710
2-78
No.
of
Grooves
P.D.
O.D.
F.D.
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
34
35
36
37
39
40
42
44
48
.637
.700
.764
.828
.891
.955
1.019
1.082
1.146
1.210
1.273
1.337
1.401
1.464
1.528
1.592
1.655
1.719
1.783
1.846
1.910
1.974
2.037
2.165
2.228
2.292
2.355
2.483
2.546
2.674
2.801
3.056
.617
.680
.744
.808
.871
.935
.999
1.062
1.126
1.190
1.253
1.317
1.381
1.444
1.508
1.572
1.635
1.699
1.763
1.826
1.890
1.954
2.017
2.145
2.208
2.272
2.335
2.463
2.526
2.654
2.781
3.036
.87
.93
.99
1.06
1.12
1.19
1.24
1.31
1.38
1.44
1.51
1.57
1.63
1.69
1.76
1.82
1.89
1.95
2.02
2.08
2.14
2.20
2.27
2.40
2.46
2.53
2.59
2.71
2.78
2.92
3.04
3.29
B
Bore
+.001
-.000
.1875
.1875
.1875
.1875
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
.3125
.3125
.3125
.3125
.3125
.3125
.3125
.3125
.3125
.3125
.3125
.3125
A
Dia.
C
Hub
Dia.
Set
Screw
3/8
3/8
3/8
3/8
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
1/2
1/2
1/2
1/2
3/4
3/4
3/4
3/4
3/4
3/4
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
#6-32
#6-32
#6-32
#6-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#10-32
#10-32
#10-32
#10-32
#10-32
#10-32
#10-32
#10-32
#10-32
#10-32
#10-32
#10-32

FOR 3/8" BELTS

SINGLE OR NO FLANGE
R
Inch
MATERIAL:

13/16
SPECIFICATION:
7/8
1/2
1/16
D/2
SET
SCREW
O.D. A
B C F.D.
D
D/2
SET
SCREW
3/16
O.D.
B C
A
3/16
INSERT IS FLUSH ON
PULLEY WITH 58 TEETH
7/16

A 6J 3-10SF03706
A 6J 3-11SF03706
A 6J 3-12SF03706
A 6J 3-13SF03706
A 6J 3-14SF03708
A 6J 3-15SF03708
A 6J 3-16SF03708
A 6J 3-17SF03708
A 6J 3-18SF03708
A 6J 3-19SF03708
A 6J 3-20SF03708
A 6J 3-21SF03708
A 6J 3-22SF03708
A 6J 3-23SF03708
A 6J 3-24SF03708
A 6J 3-25SF03708
A 6J 3-26SF03708
A 6J 3-27SF03708
A 6J 3-28SF03708
A 6J 3-29SF03708
A 6J 3-30SF03710
A 6J 3-31SF03710
A 6J 3-32SF03710
A 6J 3-34SF03710
A 6J 3-35SF03710
A 6J 3-36SF03710
A 6J 3-37SF03710
A 6J 3-39SF03710
A 6J 3-40SF03710
A 6J 3-42SF03710
A 6J 3-44SF03710
A 6J 3-48SF03710
A 6J 3-58SF03712
Fig. 2 No Flange
A 6J 3-60NF03712
A 6J 3-72NF03712
2
3
4
Fig. 1
Fig. 2
INCH COMPONENT
Catalog Number
No.
of
Grooves
P.D.
O.D.
F.D.
B
Bore
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
34
35
36
37
39
40
42
44
48
58
.637
.700
.764
.828
.891
.955
1.019
1.082
1.146
1.210
1.273
1.337
1.401
1.464
1.528
1.592
1.655
1.719
1.783
1.846
1.910
1.974
2.037
2.165
2.228
2.292
2.355
2.483
2.546
2.674
2.801
3.056
3.692
.617
.680
.744
.808
.871
.935
.999
1.062
1.126
1.190
1.253
1.317
1.381
1.444
1.508
1.572
1.635
1.699
1.763
1.826
1.890
1.954
2.017
2.145
2.208
2.272
2.335
2.463
2.526
2.654
2.781
3.036
3.672
.87
.93
.99
1.06
1.12
1.19
1.24
1.31
1.38
1.44
1.51
1.57
1.63
1.69
1.76
1.82
1.89
1.95
2.02
2.08
2.14
2.20
2.27
2.40
2.46
2.53
2.59
2.71
2.78
2.92
3.04
3.29
3.92
60
72
3.820
4.584
3.800
4.564
A
Dia.
C
Hub
Dia.
D
Hub
Proj.
Set
Screw
.1875
.1875
.1875
.1875
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
.3125
.3125
.3125
.3125
.3125
.3125
.3125
.3125
.3125
.3125
.3125
.3125
.375
3/8
3/8
3/8
3/8
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
1/2
1/2
1/2
1/2
3/4
3/4
3/4
3/4
3/4
3/4
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
1-1/32
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
5/16
#6-32
#6-32
#6-32
#6-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#10-32
#10-32
#10-32
#10-32
#10-32
#10-32
#10-32
#10-32
#10-32
#10-32
#10-32
#10-32
#10-32
.375
.375
5/8
5/8
1-1/32
1-1/32
3/8
3/8
#10-32
#10-32
+.001
-.000
2-79
5
6
7
8
9
10
11
12
13
14
15
16
I
R
T

FOR 3/8" BELTS

MOLDED WITH INSERT
DOUBLE FLANGE
Inch
MATERIAL:

Insert - Aluminum, Knurled
1
2
13/16
1/4
9/64
13/16
1/4
9/64
SET
SCREW
SET
SCREW
3
D
B C F.D.
O.D. A
B C F.D.
SPOT DRILL
7/16
SPOT DRILL
7/16
Fig. 2
Fig. 1
INCH COMPONENT
Catalog Number
7
8
9
10
11
12
13
14
15
16
Fig. 1
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
Fig. 2
A
A
A
A
A
A
No.
of
Grooves
P.D.
O.D.
F.D.
B
Bore
+.001
-.000
A
Dia.
C
Hub
Dia.
Set
Screw
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
3-10DF03706
3-10DF03708
3-11DF03706
3-11DF03708
3-12DF03706
3-12DF03708
3-13DF03706
3-13DF03708
3-14DF03708
3-14DF03710
3-14DF03712
3-15DF03708
3-15DF03710
3-15DF03712
3-16DF03708
3-16DF03710
3-16DF03712
3-17DF03708
3-17DF03710
3-17DF03712
3-18DF03708
3-18DF03710
3-18DF03712
10
10
11
11
12
12
13
13
14
14
14
15
15
15
16
16
16
17
17
17
18
18
18
.637
.637
.700
.700
.764
.764
.828
.828
.891
.891
.891
.955
.955
.955
1.019
1.019
1.019
1.082
1.082
1.082
1.146
1.146
1.146
.617
.617
.680
.680
.744
.744
.808
.808
.871
.871
.871
.935
.935
.935
.999
.999
.999
1.063
1.063
1.063
1.126
1.126
1.126
.87
.87
.93
.93
.99
.99
1.06
1.06
1.12
1.12
1.12
1.19
1.19
1.19
1.24
1.24
1.24
1.31
1.31
1.31
1.38
1.38
1.38
.1875
.250
.1875
.250
.1875
.250
.1875
.250
.250
.3125
.375
.250
.3125
.375
.250
.3125
.375
.250
.3125
.375
.250
.3125
.375
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
11/16
11/16
11/16
11/16
11/16
11/16
11/16
11/16
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
#6-32
#6-32
#6-32
#6-32
#6-32
#6-32
#6-32
#6-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
6Z
6Z
6Z
6Z
6Z
6Z
3-19DF03708
3-19DF03710
3-19DF03712
3-20DF03708
3-20DF03710
3-20DF03712
19
19
19
20
20
20
1.210
1.210
1.210
1.273
1.273
1.273
1.190
1.190
1.190
1.253
1.253
1.253
1.44
1.44
1.44
1.51
1.51
1.51
.250
.3125
.375
.250
.3125
.375
1/2
1/2
1/2
1/2
1/2
1/2
3/4
3/4
3/4
7/8
7/8
7/8
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
2-80

FOR 3/8" BELTS

MOLDED WITH INSERT
DOUBLE FLANGE
R
Inch
MATERIAL:

T
1
2
13/16
1/4
9/64
O.D. 1/2
SET SCREW
#8-32
B 7/8 F.D.
SPOT DRILL
3/16
7/16
INCH COMPONENT
Catalog Number
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
3-21DF03708
3-21DF03710
3-21DF03712
3-22DF03708
3-22DF03710
3-22DF03712
3-23DF03708
3-23DF03710
3-23DF03712
3-24DF03708
3-24DF03710
3-24DF03712
3-25DF03708
3-25DF03710
3-25DF03712
3-26DF03708
3-26DF03710
3-26DF03712
3-27DF03708
3-27DF03710
3-27DF03712
3-28DF03708
3-28DF03710
3-28DF03712
3-29DF03708
3-29DF03710
3-29DF03712
3-30DF03708
3-30DF03710
3-30DF03712
No.
of
Grooves
P.D.
O.D.
F.D.
21
21
21
22
22
22
23
23
23
24
24
24
25
25
25
26
26
26
27
27
27
28
28
28
29
29
29
30
30
30
1.337
1.337
1.337
1.401
1.401
1.401
1.464
1.464
1.464
1.528
1.528
1.528
1.592
1.592
1.592
1.655
1.655
1.655
1.719
1.719
1.719
1.783
1.783
1.783
1.846
1.846
1.846
1.910
1.910
1.910
1.317
1.317
1.317
1.381
1.381
1.381
1.445
1.445
1.445
1.508
1.508
1.508
1.572
1.572
1.572
1.636
1.636
1.636
1.700
1.700
1.700
1.763
1.763
1.763
1.827
1.827
1.827
1.890
1.890
1.890
1.57
1.57
1.57
1.63
1.63
1.63
1.69
1.69
1.69
1.76
1.76
1.76
1.82
1.82
1.82
1.89
1.89
1.89
1.95
1.95
1.95
2.02
2.02
2.02
2.08
2.08
2.08
2.14
2.14
2.14
B
Bore
+.001
-.000
.250
.3125
.375
.250
.3125
.375
.250
.3125
.375
.250
.3125
.375
.250
.3125
.375
.250
.3125
.375
.250
.3125
.375
.250
.3125
.375
.250
.3125
.375
.250
.3125
.375

and continued on the next page
2-81
6
7
8
9
10
11
12
13
14
15
16
I
R
T

FOR 3/8" BELTS

MOLDED WITH INSERT
DOUBLE FLANGE
Inch
MATERIAL:

1
2
7/8
5/16
5/32
SET SCREW
#10-32
3
O.D. 5/8
B 7/8 F.D.
4
SPOT DRILL
5
6
7
8
9
10
11
12
13
14
15
16
3/16
7/16
INCH COMPONENT
Catalog Number
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
3-31DF03710
3-31DF03712
3-31DF03716
3-32DF03710
3-32DF03712
3-32DF03716
3-34DF03710
3-34DF03712
3-34DF03716
3-35DF03710
3-35DF03712
3-35DF03716
3-36DF03710
3-36DF03712
3-36DF03716
3-37DF03710
3-37DF03712
3-37DF03716
3-39DF03710
3-39DF03712
3-39DF03716
3-40DF03710
3-40DF03712
3-40DF03716
3-42DF03710
3-42DF03712
3-42DF03716
3-44DF03710
3-44DF03712
3-44DF03716
3-48DF03710
3-48DF03712
3-48DF03716
2-82
No.
of
Grooves
P.D.
O.D.
31
31
31
32
32
32
34
34
34
35
35
35
36
36
36
37
37
37
39
39
39
40
40
40
42
42
42
44
44
44
48
48
48
1.973
1.973
1.973
2.037
2.037
2.037
2.165
2.165
2.165
2.228
2.228
2.228
2.292
2.292
2.292
2.355
2.355
2.355
2.482
2.482
2.482
2.546
2.546
2.546
2.674
2.674
2.674
2.801
2.801
2.801
3.056
3.056
3.056
1.954
1.954
1.954
2.017
2.017
2.017
2.145
2.145
2.145
2.209
2.209
2.209
2.272
2.272
2.272
2.336
2.336
2.336
2.462
2.462
2.462
2.526
2.526
2.526
2.654
2.654
2.654
2.781
2.781
2.781
3.036
3.036
3.036
F.D.
B
Bore
+.001
-.000
.3125
2.20
.375
2.20
.500
2.20
.3125
2.27
.375
2.27
.500
2.27
.3125
2.40
.375
2.40
.500
2.40
.3125
2.46
.375
2.46
.500
2.46
.3125
2.53
.375
2.53
.500
2.53
.3125
2.59
.375
2.59
.500
2.59
.3125
2.71
.375
2.71
.500
2.71
.3125
2.78
.375
2.78
.500
2.78
.3125
2.92
.375
2.92
.500
2.92
.3125
3.04
3.04
.375
3.04
.500
.3125
3.29
.375
3.29
.500
3.29

FOR 3/8" BELTS

MOLDED WITH INSERT
SINGLE FLANGE
R
Inch
MATERIAL:

T
1
13/16
1/2
O.D. A
13/16
1/4 SET
9/64 SCREW
B C F.D.
1/4
9/64
SET
SCREW
1/2
O.D. A
SPOT DRILL
3/16
7/16
Fig. 1
Fig. 2
INCH COMPONENT
Catalog Number
Fig. 1
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
Fig. 2
A
A
A
A
A
A
No.
of
Grooves
P.D.
O.D.
F.D.
B
Bore
+.001
-.000
B C F.D.
SPOT DRILL
7/16
A
Dia.
C
Hub
Dia.
Set
Screw
6
7
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
3-10SF03706
3-10SF03708
3-11SF03706
3-11SF03708
3-12SF03706
3-12SF03708
3-13SF03706
3-13SF03708
3-14SF03708
3-14SF03710
3-14SF03712
3-15SF03708
3-15SF03710
3-15SF03712
3-16SF03708
3-16SF03710
3-16SF03712
3-17SF03708
3-17SF03710
3-17SF03712
3-18SF03708
3-18SF03710
3-18SF03712
10
10
11
11
12
12
13
13
14
14
14
15
15
15
16
16
16
17
17
17
18
18
18
.637
.637
.700
.700
.764
.764
.828
.828
.891
.891
.891
.955
.955
.955
1.019
1.019
1.019
1.082
1.082
1.082
1.146
1.146
1.146
.617
.617
.680
.680
.744
.744
.808
.808
.871
.871
.871
.935
.935
.935
.999
.999
.999
1.063
1.063
1.063
1.126
1.126
1.126
.87
.87
.93
.93
.99
.99
1.06
1.06
1.12
1.12
1.12
1.19
1.19
1.19
1.24
1.24
1.24
1.31
1.31
1.31
1.38
1.38
1.38
.1875
.250
.1875
.250
.1875
.250
.1875
.250
.250
.3125
.375
.250
.3125
.375
.250
.3125
.375
.250
.3125
.375
.250
.3125
.375
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
11/16
11/16
11/16
11/16
11/16
11/16
11/16
11/16
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
#6-32
#6-32
#6-32
#6-32
#6-32
#6-32
#6-32
#6-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
6Z
6Z
6Z
6Z
6Z
6Z
3-19SF03708
3-19SF03710
3-19SF03712
3-20SF03708
3-20SF03710
3-20SF03712
19
19
19
20
20
20
1.210
1.210
1.210
1.273
1.273
1.273
1.190
1.190
1.190
1.253
1.253
1.253
1.44
1.44
1.44
1.51
1.51
1.51
.250
.3125
.375
.250
.3125
.375
1/2
1/2
1/2
1/2
1/2
1/2
3/4
3/4
3/4
7/8
7/8
7/8
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
2-83
8
9
10
11
12
13
14
15
16
I
R
T

FOR 3/8" BELTS

MOLDED WITH INSERT
SINGLE FLANGE
Inch
MATERIAL:

1
2
13/16
1/2
3
4
O.D. 1/2
3/16
8
9
10
11
12
13
14
15
16
7/16
INCH COMPONENT
Catalog Number
B 7/8 F.D.
SPOT DRILL
5
6
SET SCREW
#8-32
1/4
9/64
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
3-21SF03708
3-21SF03710
3-21SF03712
3-22SF03708
3-22SF03710
3-22SF03712
3-23SF03708
3-23SF03710
3-23SF03712
3-24SF03708
3-24SF03710
3-24SF03712
3-25SF03708
3-25SF03710
3-25SF03712
3-26SF03708
3-26SF03710
3-26SF03712
3-27SF03708
3-27SF03710
3-27SF03712
3-28SF03708
3-28SF03710
3-28SF03712
3-29SF03708
3-29SF03710
3-29SF03712
3-30SF03708
3-30SF03710
3-30SF03712
No.
of
Grooves
P.D.
O.D.
F.D.
21
21
21
22
22
22
23
23
23
24
24
24
25
25
25
26
26
26
27
27
27
28
28
28
29
29
29
30
30
30
1.337
1.337
1.337
1.401
1.401
1.401
1.464
1.464
1.464
1.528
1.528
1.528
1.592
1.592
1.592
1.655
1.655
1.655
1.719
1.719
1.719
1.783
1.783
1.783
1.846
1.846
1.846
1.910
1.910
1.910
1.317
1.317
1.317
1.381
1.381
1.381
1.445
1.445
1.445
1.508
1.508
1.508
1.572
1.572
1.572
1.636
1.636
1.636
1.700
1.700
1.700
1.763
1.763
1.763
1.827
1.827
1.827
1.890
1.890
1.890
1.57
1.57
1.57
1.63
1.63
1.63
1.69
1.69
1.69
1.76
1.76
1.76
1.82
1.82
1.82
1.89
1.89
1.89
1.95
1.95
1.95
2.02
2.02
2.02
2.08
2.08
2.08
2.14
2.14
2.14
B
Bore
+.001
-.000
.250
.3125
.375
.250
.3125
.375
.250
.3125
.375
.250
.3125
.375
.250
.3125
.375
.250
.3125
.375
.250
.3125
.375
.250
.3125
.375
.250
.3125
.375
.250
.3125
.375

2-84

FOR 3/8" BELTS

MOLDED WITH INSERT
SINGLE FLANGE
R
Inch
MATERIAL:

T
1
13/16
5/16
5/32
SET SCREW
#10-32
O.D. 5/8
3
4
B 7/8 F.D.
SPOT DRILL
3/16
INCH COMPONENT
Catalog Number
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
3-31SF03710
3-31SF03712
3-31SF03716
3-32SF03710
3-32SF03712
3-32SF03716
3-34SF03710
3-34SF03712
3-34SF03716
3-35SF03710
3-35SF03712
3-35SF03716
3-36SF03710
3-36SF03712
3-36SF03716
3-37SF03710
3-37SF03712
3-37SF03716
3-39SF03710
3-39SF03712
3-39SF03716
3-40SF03710
3-40SF03712
3-40SF03716
7/16
No.
of
Grooves
P.D.
O.D.
F.D.
31
31
31
32
32
32
34
34
34
35
35
35
36
36
36
37
37
37
39
39
39
40
40
40
1.973
1.973
1.973
2.037
2.037
2.037
2.165
2.165
2.165
2.228
2.228
2.228
2.292
2.292
2.292
2.355
2.355
2.355
2.482
2.482
2.482
2.546
2.546
2.546
1.954
1.954
1.954
2.017
2.017
2.017
2.145
2.145
2.145
2.209
2.209
2.209
2.272
2.272
2.272
2.336
2.336
2.336
2.462
2.462
2.462
2.526
2.526
2.526
2.20
2.20
2.20
2.27
2.27
2.27
2.40
2.40
2.40
2.46
2.46
2.46
2.53
2.53
2.53
2.59
2.59
2.59
2.71
2.71
2.71
2.78
2.78
2.78
B
Bore
+.001
-.000
.3125
.375
.500
.3125
.375
.500
.3125
.375
.500
.3125
.375
.500
.3125
.375
.500
.3125
.375
.500
.3125
.375
.500
.3125
.375
.500

6
7
8
9
10
11
12
13
14
15
2-85
16
I
R
T

FOR 3/8" BELTS

MOLDED WITH INSERT
SINGLE OR NO FLANGE
Inch
MATERIAL:

1
2
W
E
D
D/2
3
O.D. 5/8
B C F.D.
SET
SCREW
#10-32
3/16
SET
SCREW
#10-32
D
D/2
O.D. 5/8
B C
SPOT
DRILL
3/16
SPOT DRILL
W
Fig. 1
Fig. 2
INCH COMPONENT
7
8
9
10
11
12
13
Catalog Number
A 6Z 3-42SF03710
A 6Z 3-42SF03712
A 6Z 3-42SF03716
A 6Z 3-44SF03710
A 6Z 3-44SF03712
A 6Z 3-44SF03716
A 6Z 3-48SF03710
A 6Z 3-48SF03712
A 6Z 3-48SF03716
A 6Z 3-58SF03710
A 6Z 3-58SF03712
A 6Z 3-58SF03716
A 6Z 3-78SF03710
A 6Z 3-78SF03712
A 6Z 3-78SF03716
Fig. 2 No Flange
A 6Z 3-60NF03710
A 6Z 3-60NF03712
A 6Z 3-60NF03716
A 6Z 3-72NF03710
A 6Z 3-72NF03712
A 6Z 3-72NF03716
14
P.D.
O.D.
F.D.
B
Bore
42
42
42
44
44
44
48
48
48
58
58
58
78
78
78
2.674
2.674
2.674
2.801
2.801
2.801
3.056
3.056
3.056
3.692
3.692
3.692
4.966
4.966
4.966
2.654
2.654
2.654
2.781
2.781
2.781
3.036
3.036
3.036
3.672
3.672
3.672
4.946
4.946
4.946
2.92
2.92
2.92
3.04
3.04
3.04
3.29
3.29
3.29
3.92
3.92
3.92
5.19
5.19
5.19
60
60
60
72
72
72
3.820
3.820
3.820
4.584
4.584
4.584
3.800
3.800
3.800
4.564
4.564
4.564
E
Length
C
Hub
Dia.
D
Hub
Proj.
.3125
.375
.500
.3125
.375
.500
.3125
.375
.500
.3125
.375
.500
.3125
.375
.500
13/16
13/16
13/16
13/16
13/16
13/16
13/16
13/16
13/16
13/16
13/16
13/16
31/32
31/32
31/32
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
1
1
1
1
1
1
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
3/8
3/8
3/8
7/16
7/16
7/16
7/16
7/16
7/16
7/16
7/16
7/16
7/16
7/16
7/16
1/2
1/2
1/2
.3125
.375
.500
.3125
.375
.500
7/8
7/8
7/8
7/8
7/8
7/8
1
1
1
1
1
1
3/8
3/8
3/8
3/8
3/8
3/8
1/2
1/2
1/2
1/2
1/2
1/2
+.001
-.000
15
16
No.
of
Grooves
2-86

FOR 3/8" BELTS

MOLDED WITH SET SCREW
DOUBLE FLANGE
R
Inch
MATERIAL:
SPECIFICATION:
Pulleys have 2 #8-32 set screws at 90.
1
E
O.D.
9/64
9/64
B C F.D.
O.D.
B C F.D.
SET
SCREWS
7/16
Fig. 1
SET
SCREWS
3/16
7/16
Fig. 2
6
INCH COMPONENT
Catalog Number
Fig. 1
A
A
A
A
A
A
A
A
A
Fig. 2
A
A
A
A
A
A
A
A
A
A
A
A
A
No.
of
Grooves
P.D.
O.D.
F.D.
B
Bore
+.001
-.000
E
Length
C
Hub
Dia.
D
Hub
Proj.
6K
6K
6K
6K
6K
6K
6K
6K
6K
3-10DF03706
3-11DF03706
3-12DF03706
3-13DF03706
3-14DF03708
3-15DF03708
3-16DF03708
3-17DF03708
3-18DF03708
10
11
12
13
14
15
16
17
18
.637
.700
.764
.828
.891
.955
1.019
1.082
1.146
.617
.680
.744
.808
.871
.935
.999
1.062
1.126
.87
.93
.99
1.06
1.12
1.19
1.24
1.31
1.38
.1875
.1875
.1875
.1875
.250
.250
.250
.250
.250
13/16
13/16
13/16
13/16
13/16
13/16
13/16
13/16
13/16
11/16
11/16
11/16
11/16
3/4
3/4
3/4
3/4
3/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
6K
6K
6K
6K
6K
6K
6K
6K
6K
6K
6K
6K
6K
3-19DF03708
3-20DF03708
3-21DF03708
3-22DF03708
3-23DF03708
3-24DF03708
3-25DF03708
3-26DF03708
3-27DF03708
3-28DF03708
3-29DF03708
3-30DF03710
3-31DF03710
19
20
21
22
23
24
25
26
27
28
29
30
31
1.210
1.273
1.337
1.401
1.464
1.528
1.592
1.655
1.719
1.783
1.846
1.910
1.974
1.190
1.253
1.317
1.381
1.444
1.508
1.572
1.635
1.699
1.763
1.826
1.890
1.954
1.44
1.51
1.57
1.63
1.69
1.76
1.82
1.89
1.95
2.02
2.08
2.14
2.20
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
.3125
.3125
13/16
13/16
13/16
13/16
13/16
13/16
13/16
13/16
13/16
13/16
13/16
13/16
7/8
3/4
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
5/16*
* Set Screw location D/2
7
8
9
10
11
12
13
14
15
2-87
16
I
R
T

FOR 3/8" BELTS

MOLDED WITH SET SCREW
SINGLE OR NO FLANGE
Inch
MATERIAL:
Polycarbonate
SPECIFICATION:
Pulleys have 2 #10-32

set screws at 90.
2
3
3/16
3/16
D/2
O.D.
D/2
B C F.D.
O.D.
B C
SET
SCREW
SET
SCREW
7
8
9
10
11
12
13
Fig. 1
Single Flange
INCH COMPONENT
Catalog Number
A 6K 3-32SF03710
A 6K 3-34SF03710
A 6K 3-35SF03710
A 6K 3-36SF03710
A 6K 3-37SF03710
A 6K 3-39SF03710
A 6K 3-40SF03710
A 6K 3-42SF03710
A 6K 3-44SF03710
A 6K 3-48SF03710
A 6K 3-58SF03712
A 6K 3-78SF03712
Fig. 2 No Flange
A 6K 3-60NF03712
A 6K 3-72NF03712
14
15
16
Fig. 2
No Flange
2-88
No.
of
Grooves
P.D.
O.D.
F.D.
B
Bore
32
34
35
36
37
39
40
42
44
48
58
78
2.037
2.165
2.228
2.292
2.355
2.483
2.546
2.674
2.801
3.056
3.692
4.966
2.017
2.145
2.208
2.272
2.335
2.463
2.526
2.654
2.781
3.036
3.672
4.946
2.27
2.40
2.46
2.53
2.59
2.71
2.78
2.92
3.04
3.29
3.92
5.19
60
72
3.820
4.584
3.800
4.564
E
Length
C
Hub
Dia.
D
Hub
Proj.
.3125
.3125
.3125
.3125
.3125
.3125
.3125
.3125
.3125
.3125
.375
.375
13/16
13/16
13/16
13/16
13/16
13/16
13/16
13/16
13/16
13/16
13/16
31/32
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
1
1
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
3/8
7/16
7/16
7/16
7/16
7/16
7/16
7/16
7/16
7/16
7/16
7/16
1/2
.375
.375
7/8
7/8
1
1
3/8
3/8
1/2
1/2
+.001
-.000

FOR 3/8" BELTS

MOLDED
DOUBLE FLANGE
R
Inch
MATERIAL:
T
1
E
D
3
O.D.
B C F.D.
O.D.
B C F.D.
4
3/16
7/16
Fig. 1
INCH COMPONENT
Catalog Number
Fig. 1
A
A
A
A
A
A
A
A
A
Fig. 2
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
7/16
Fig. 2
No.
of
Grooves
P.D.
O.D.
F.D.
B
Bore
+.001
-.000
E
Length
C
Hub
Dia.
D
Hub
Proj.
6
7
6L
6L
6L
6L
6L
6L
6L
6L
6L
3-10DF03706
3-11DF03706
3-12DF03706
3-13DF03706
3-14DF03708
3-15DF03708
3-16DF03708
3-17DF03708
3-18DF03708
10
11
12
13
14
15
16
17
18
.637
.700
.764
.828
.891
.955
1.019
1.082
1.146
.617
.680
.744
.808
.871
.935
.999
1.062
1.126
.87
.93
.99
1.06
1.12
1.19
1.24
1.31
1.38
.1875
.1875
.1875
.1875
.250
.250
.250
.250
.250
13/16
13/16
13/16
13/16
13/16
13/16
13/16
13/16
13/16
11/16
11/16
11/16
11/16
3/4
3/4
3/4
3/4
3/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
6L
6L
6L
6L
6L
6L
6L
6L
6L
6L
6L
6L
6L
6L
6L
6L
6L
6L
6L
6L
6L
6L
6L
3-19DF03708
3-20DF03708
3-21DF03708
3-22DF03708
3-23DF03708
3-24DF03708
3-25DF03708
3-26DF03708
3-27DF03708
3-28DF03708
3-29DF03708
3-30DF03710
3-31DF03710
3-32DF03710
3-34DF03710
3-35DF03710
3-36DF03710
3-37DF03710
3-39DF03710
3-40DF03710
3-42DF03710
3-44DF03710
3-48DF03710
19
20
21
22
23
24
25
26
27
28
29
30
31
32
34
35
36
37
39
40
42
44
48
1.210
1.273
1.337
1.401
1.464
1.528
1.592
1.655
1.719
1.783
1.846
1.910
1.974
2.037
2.165
2.228
2.292
2.355
2.483
2.546
2.674
2.801
3.056
1.190
1.253
1.317
1.381
1.444
1.508
1.572
1.635
1.699
1.763
1.826
1.890
1.954
2.017
2.145
2.208
2.272
2.335
2.463
2.526
2.654
2.781
3.036
1.44
1.51
1.57
1.63
1.69
1.76
1.82
1.89
1.95
2.02
2.08
2.14
2.20
2.27
2.40
2.46
2.53
2.59
2.71
2.78
2.92
3.04
3.29
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
.3125
.3125
.3125
.3125
.3125
.3125
.3125
.3125
.3125
.3125
.3125
.3125
13/16
13/16
13/16
13/16
13/16
13/16
13/16
13/16
13/16
13/16
13/16
13/16
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
3/4
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
2-89
8
9
10
11
12
13
14
15
16
I
R
T

FOR 3/8" BELTS

MOLDED
SINGLE FLANGE
Inch
MATERIAL:
1
2
13/16
13/16
1/4
1/2
1/4
1/2
4
O.D. A
B C F.D.
O.D. A
B C
F.D.
5
7/16
3/16
Fig. 1
7/16
Fig. 2
INCH COMPONENT
7
8
9
10
11
12
13
Catalog Number
Fig. 1
A
A
A
A
A
A
A
A
A
Fig. 2
A
A
A
A
A
A
A
A
A
A
A
A
P.D.
O.D.
F.D.
B
Bore
+.001
-.000
A
Dia.
C
Hub
Dia.
6L
6L
6L
6L
6L
6L
6L
6L
6L
3-10SF03706
3-11SF03706
3-12SF03706
3-13SF03706
3-14SF03708
3-15SF03708
3-16SF03708
3-17SF03708
3-18SF03708
10
11
12
13
14
15
16
17
18
.637
.700
.764
.828
.891
.955
1.019
1.082
1.146
.617
.680
.744
.808
.871
.935
.999
1.062
1.126
.87
.93
.99
1.06
1.12
1.19
1.24
1.31
1.38
.1875
.1875
.1875
.1875
.250
.250
.250
.250
.250
3/8
3/8
3/8
3/8
1/2
1/2
1/2
1/2
1/2
11/16
11/16
11/16
11/16
3/4
3/4
3/4
3/4
3/4
6L
6L
6L
6L
6L
6L
6L
6L
6L
6L
6L
6L
3-19SF03708
3-20SF03708
3-21SF03708
3-22SF03708
3-23SF03708
3-24SF03708
3-25SF03708
3-26SF03708
3-27SF03708
3-28SF03708
3-29SF03708
3-30SF03710
19
20
21
22
23
24
25
26
27
28
29
30
1.210
1.273
1.337
1.401
1.464
1.528
1.592
1.655
1.719
1.783
1.846
1.910
1.190
1.253
1.317
1.381
1.444
1.508
1.572
1.635
1.699
1.763
1.826
1.890
1.44
1.51
1.57
1.63
1.69
1.76
1.82
1.89
1.95
2.02
2.08
2.14
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
.3125
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
3/4
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
14
15
16
No.
of
Grooves
2-90

FOR 3/8" BELTS

MOLDED
SINGLE OR NO FLANGE
R
Inch
MATERIAL:
T
1
2
3/16
3/16
O.D.
B C F.D.
O.D.
B C
6
Fig. 1
Single Flange
Fig. 2
No Flange
INCH COMPONENT
Catalog Number
A 6L 3-31SF03710
A 6L 3-32SF03710
A 6L 3-34SF03710
A 6L 3-35SF03710
A 6L 3-36SF03710
A 6L 3-37SF03710
A 6L 3-39SF03710
A 6L 3-40SF03710
A 6L 3-42SF03710
A 6L 3-44SF03710
A 6L 3-48SF03710
A 6L 3-58SF03712
A 6L 3-78SF03712
Fig. 2 No Flange
A 6L 3-60NF03712
A 6L 3-72NF03712
No.
of
Grooves
P.D.
O.D.
F.D.
B
Bore
31
32
34
35
36
37
39
40
42
44
48
58
78
1.974
2.037
2.165
2.228
2.292
2.355
2.483
2.546
2.674
2.801
3.056
3.692
4.966
1.954
2.017
2.145
2.208
2.272
2.335
2.463
2.526
2.654
2.781
3.036
3.672
4.946
2.20
2.27
2.40
2.46
2.53
2.59
2.71
2.78
2.92
3.04
3.29
3.92
5.19
60
72
3.820
4.584
3.800
4.564
8
E
Length
C
Hub
Dia.
D
Hub
Proj.
.3125
.3125
.3125
.3125
.3125
.3125
.3125
.3125
.3125
.3125
.3125
.375
.375
13/16
13/16
13/16
13/16
13/16
13/16
13/16
13/16
13/16
13/16
13/16
13/16
31/32
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
1
1
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
3/8
7/16
7/16
7/16
7/16
7/16
7/16
7/16
7/16
7/16
7/16
7/16
7/16
1/2
.375
.375
7/8
7/8
1
1
3/8
3/8
1/2
1/2
+.001
-.000
9
10
11
12
13
14
15
2-91
16
I
R
T

FOR 3/8" BELTS

MOLDED
DOUBLE FLANGE
Inch
MATERIAL:
Acetal
SPECIFICATION:

do not have webs.
2
3
1
1/2
3/8
4
B C F.D.
O.D.
5
6
7
8
9
10
11
12
INCH COMPONENT
Catalog Number
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
6M
6M
6M
6M
6M
6M
6M
6M
6M
6M
6M
6M
6M
6M
6M
6M
6M
6M
6M
3-10DF037
3-11DF037
3-12DF037
3-14DF037
3-15DF037
3-16DF037
3-18DF037
3-20DF037
3-21DF037
3-22DF037
3-24DF037
3-28DF037
3-30DF037
3-32DF037
3-36DF037
3-40DF037
3-42DF037
3-44DF037
3-48DF037
13
14
15
16
2-92
No.
of
Grooves
P.D.
O.D.
F.D.
10
11
12
14
15
16
18
20
21
22
24
28
30
32
36
40
42
44
48
.637
.700
.764
.891
.955
1.019
1.146
1.273
1.337
1.401
1.528
1.783
1.910
2.037
2.292
2.546
2.674
2.801
3.056
.617
.680
.744
.871
.935
.999
1.126
1.253
1.317
1.381
1.508
1.763
1.890
2.017
2.272
2.526
2.654
2.781
3.036
55/64
59/64
1
1-1/8
1-3/16
1-1/4
1-3/8
1-1/2
1-9/16
1-5/8
1-3/4
2-1/64
2-9/64
2-17/64
2-33/64
2-25/32
2-29/32
3-1/32
3-9/32
B
Bore
+.001
-.002
.1875
.1875
.1875
.250
.250
.250
.250
.250
.250
.250
.250
.250
.3125
.3125
.3125
.3125
.3125
.3125
.3125
C
Hub
Dia.
1/2
1/2
1/2
1/2
1/2
1/2
5/8
5/8
5/8
5/8
5/8
5/8
11/16
11/16
11/16
11/16
11/16
11/16
11/16

FOR 3/8" BELTS

MOLDED
SINGLE FLANGE
R
Inch
MATERIAL:
Acetal
SPECIFICATION:

do not have webs.
1
2
3
1
3/8
1/2
4
O.D.
B C F.D.
5
6
INCH COMPONENT
Catalog Number
A
A
A
A
*A
*A
A
A
*A
A
*A
*A
A
*A
*A
A
*A
*A
A
6M
6M
6M
6M
6M
6M
6M
6M
6M
6M
6M
6M
6M
6M
6M
6M
6M
6M
6M
3-10SF037
3-11SF037
3-12SF037
3-14SF037
3-15SF037
3-16SF037
3-18SF037
3-20SF037
3-21SF037
3-22SF037
3-24SF037
3-28SF037
3-30SF037
3-32SF037
3-36SF037
3-40SF037
3-42SF037
3-44SF037
3-48SF037
No.
of
Grooves
P.D.
O.D.
F.D.
10
11
12
14
15
16
18
20
21
22
24
28
30
32
36
40
42
44
48
.637
.700
.764
.891
.955
1.019
1.146
1.273
1.337
1.401
1.528
1.783
1.910
2.037
2.292
2.546
2.674
2.801
3.056
.617
.680
.744
.871
.935
.999
1.126
1.253
1.317
1.381
1.508
1.763
1.890
2.017
2.272
2.526
2.654
2.781
3.036
7/8
15/16
1
1-1/8
1-3/16
1-1/4
1-3/8
1-1/2
1-9/16
1-5/8
1-3/4
2
2-1/8
2-1/4
2-17/32
2-3/4
2-29/32
3-1/32
3-9/32
B
Bore
+.001
-.002
.1875
.1875
.1875
.250
.250
.250
.250
.250
.250
.250
.3125
.3125
.3125
.3125
.3125
.3125
.3125
.3125
.3125
C
Hub
Dia.
1/2
1/2
1/2
1/2
1/2
1/2
5/8
5/8
5/8
5/8
5/8
5/8
11/16
11/16
11/16
11/16
11/16
11/16
11/16
7
8
9
10
11
12
* These pulleys are 15/16 wide (no flange shoulder)
13
14
15
2-93
16
I
R
T

FOR 3/8" BELTS

MOLDED
DOUBLE FLANGE
Inch
MATERIAL:
Nylon - Black, Fiberglass Reinforced
Other bore sizes available on special order.
59/64
5/16
29/64
5/32
F.D. O.D.
B C
SET SCREW
#10-24
57/64
Fig. 1
29/64
59/64
59/64
5/16
5/32
SET SCREW
#10-24
5
F.D. O.D. 13/16 B
5/16
29/64
5/32
B
1/4
F.D. O.D.
SET SCREW
#10-24
57/64
57/64
7
8
Fig. 3
Fig. 2
INCH COMPONENT
Catalog Number
No.
of
Grooves
P.D.
O.D.
F.D.
B
Bore
+.0010
-.0000
C
Hub
Dia.
Fig. 1
9
10
Fig. 2
11
12
13
14
15
16
Fig. 3
A
A
A
A
6T
6T
6T
6T
3-10DF037
3-11DF037
3-12DF037
3-13DF037
10
11
12
13
.637
.700
.764
.828
.617
.680
.744
.808
.87
.94
1.00
1.05
.2505
.2505
.2505
.2505
19/32
19/32
3/4
7/8
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
6T
6T
6T
6T
6T
6T
6T
6T
6T
6T
6T
6T
6T
6T
6T
3-14DF037
3-15DF037
3-16DF037
3-17DF037
3-18DF037
3-20DF037
3-21DF037
3-22DF037
3-24DF037
3-25DF037
3-26DF037
3-27DF037
3-28DF037
3-29DF037
3-30DF037
14
15
16
17
18
20
21
22
24
25
26
27
28
29
30
.891
.955
1.019
1.082
1.146
1.273
1.337
1.401
1.528
1.592
1.655
1.719
1.783
1.846
1.910
.871
.935
.999
1.062
1.126
1.253
1.317
1.381
1.508
1.572
1.635
1.699
1.763
1.826
1.890
1.13
1.18
1.24
1.31
1.38
1.50
1.57
1.63
1.76
1.80
1.87
1.94
2.02
2.07
2.14
.2505
.2505
.2505
.2505
.2505
.2505
.2505
.2505
.2505
.2505
.2505
.2505
.2505
.2505
.2505
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
A
A
A
A
A
6T
6T
6T
6T
6T
3-32DF037
3-36DF037
3-40DF037
3-42DF037
3-48DF037
32
36
40
42
48
2.037
2.292
2.546
2.674
3.056
2.017
2.272
2.526
2.654
3.036
2.26
2.51
2.78
2.90
3.28
.2505
.2505
.2505
.2505
.2505
7/8
7/8
7/8
7/8
7/8
2-94

FOR 3/8" BELTS

MOLDED
SINGLE FLANGE
R
Inch
MATERIAL:
57/64
5/16
1/2
5/32
B C
F.D. O.D.
Fig. 1
SET SCREW
#10-24
37/64
57/64
5/16
1/2
F.D. O.D. 13/16 B
5/32
B
F.D.
5/16
1/2
5/32
SET SCREW
#10-24
O.D.
SET SCREW
#10-24
57/64
INCH COMPONENT
Catalog Number
Fig. 2
Fig. 3
No.
of
Grooves
P.D.
O.D.
F.D.
7
B
Bore
+.0010
-.0000
C
Hub
Dia.
Fig. 1
Fig. 2
Fig. 3
A
A
A
A
6T
6T
6T
6T
3-10SF037
3-11SF037
3-12SF037
3-13SF037
10
11
12
13
.637
.700
.764
.828
.617
.680
.744
.808
.87
.94
1.00
1.05
.2505
.2505
.2505
.2505
19/32
19/32
3/4
7/8
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
6T
6T
6T
6T
6T
6T
6T
6T
6T
6T
6T
6T
6T
6T
6T
3-14SF037
3-15SF037
3-16SF037
3-17SF037
3-18SF037
3-20SF037
3-21SF037
3-22SF037
3-24SF037
3-25SF037
3-26SF037
3-27SF037
3-28SF037
3-29SF037
3-30SF037
14
15
16
17
18
20
21
22
24
25
26
27
28
29
30
.891
.955
1.019
1.082
1.146
1.273
1.337
1.401
1.528
1.592
1.655
1.719
1.783
1.846
1.910
.871
.935
.999
1.062
1.126
1.253
1.317
1.381
1.508
1.572
1.635
1.699
1.763
1.826
1.890
1.13
1.18
1.24
1.31
1.38
1.50
1.57
1.63
1.76
1.80
1.87
1.94
2.02
2.07
2.14
.2505
.2505
.2505
.2505
.2505
.2505
.2505
.2505
.2505
.2505
.2505
.2505
.2505
.2505
.2505
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
A
A
A
A
A
A
6T
6T
6T
6T
6T
6T
3-32SF037
3-36SF037
3-40SF037
3-42SF037
3-48SF037
3-60SF037
32
36
40
42
48
60
2.037
2.292
2.546
2.674
3.056
3.820
2.017
2.272
2.526
2.654
3.036
3.800
2.26
2.51
2.78
2.90
3.28
4.01
.2505
.2505
.2505
.2505
.2505
.3755
7/8
7/8
7/8
7/8
7/8
1-1/4
2-95
9
10
11
12
13
14
15
16
I
R
T

FOR 3/8" BELTS

MOLDED
NO FLANGE
Inch
MATERIAL:
1
2
57/64
5/16
37/64
5/32
4
5
O.D.
6
7
8
9
10
SET SCREW
#10-24
INCH COMPONENT
Catalog Number
A
A
A
A
A
A
6T
6T
6T
6T
6T
6T
3-32NF037
3-36NF037
3-40NF037
3-42NF037
3-48NF037
3-60NF037
* Hub diameter of 60 teeth is 1-1/4.
11
12
13
14
15
16
*7/8
2-96
No.
of
Grooves
P.D.
O.D.
32
36
40
42
48
60
2.037
2.292
2.546
2.674
3.056
3.820
2.017
2.272
2.526
2.654
3.036
3.800
B
Bore
+.0010
-.0000
.2505
.2505
.2505
.2505
.2505
.3755
SHAFTLOC XL PULLEYS 1/5" PITCH

FOR 3/8" BELTS

MOLDED WITH METAL INSERT
R
Inch
MATERIAL:
Pulley - Nylon - Black, Fiberglass Reinforced

Insert - Steel, Overmolded
3/4
(TYP)
.625 +.002
-.000
+.002
F.D. O.D.
.625 -.000
.58
29/64
1/2
Fig. 1
INCH COMPONENT
Catalog Number
Single Flange
Fig. 1
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
6T
6T
6T
6T
6T
6T
6T
6T
6T
6T
6T
6T
6T
6T
6T
6T
6T
6T
3-H18SF3720
3-H19SF3720
3-H20SF3720
3-H21SF3720
3-H22SF3720
3-H24SF3720
3-H25SF3720
3-H26SF3720
3-H27SF3720
3-H28SF3720
3-H29SF3720
3-H30SF3720
3-H32SF3720
3-H36SF3720
3-H40SF3720
3-H42SF3720
3-H48SF3720
3-H60SF3720
Double Flange
Fig. 2
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
6T
6T
6T
6T
6T
6T
6T
6T
6T
6T
6T
6T
6T
6T
6T
6T
6T
6T
3-H18DF3720
3-H19DF3720
3-H20DF3720
3-H21DF3720
3-H22DF3720
3-H24DF3720
3-H25DF3720
3-H26DF3720
3-H27DF3720
3-H28DF3720
3-H29DF3720
3-H30DF3720
3-H32DF3720
3-H36DF3720
3-H40DF3720
3-H42DF3720
3-H48DF3720
3-H60DF3720
Fig. 2
No.
of
Grooves
P.D.
O.D.
F.D.
18
19
20
21
22
24
25
26
27
28
29
30
32
36
40
42
48
60
1.146
1.210
1.273
1.337
1.401
1.528
1.592
1.655
1.719
1.783
1.846
1.910
2.037
2.292
2.546
2.674
3.056
3.820
1.126
1.190
1.253
1.317
1.381
1.508
1.572
1.635
1.699
1.763
1.826
1.890
2.017
2.272
2.526
2.654
3.036
3.800
1.38
1.43
1.50
1.57
1.63
1.76
1.80
1.87
1.93
2.01
2.07
2.14
2.27
2.52
2.78
2.90
3.29
4.05
APPLICABLE SHAFTLOC SLEEVE

(For Shaftloc Introduction and use, see page 2-26)
1/4
SPECIFICATION:
A 3/4 O.D. x 5/8 I.D. x .05 thick washer,

Catalog Number A 7X 8-C20050 is supplied.
7/32
3
4
5
6
7
8
9
PULLEY
BORE
(REF.)
11
.375 +.001
-.000
12
1/4
Fig. 2
(13 to 32 Grooves)
INCH COMPONENT
10
MATERIAL:
416 Stainless Steel
39/64
.58
Catalog Number
Pulley
Bore
(Ref.)
Max. Torque
Capacity *
A 7Z37-030553
.625
250
lbf in.
3/4
HEX
13
14
* Based on mating components being

degreased before assembly with
Shaftloc coupling.
2-97
15
16
TRUMOTION SPECIFICATIONS
WHY CHOOSE THIS BELT ?
R
T
1
2
CLEAN RUNNING
Polymer-Free Nylon Tooth Facing Provides:

Reduced dust operation.
Durable wear surface.
Long life.
Frictional loss is kept to a minimum.
Low noise levels.
Inch
OUTSTANDING PERFORMANCE
Multiple Tooth Profiles:
Enhanced capacity through full
tooth-to-sprocket contact.
PROTECTION
3
4
5
6
7
8
Cream-Colored Polymer Compound Body:

Withstands high and low temperatures
-40F to +220F (-40C to +104C)
STRENGTH
Fiberglass Tensile Cord Insures:

Resistance to elongation.
High flex life.
RoHS COMPLIANT
APPLICATIONS:
Medical Equipment
Data Storage Equipment
Printers and Plotters
Office Equipment
AVAILABLE IN:
MXL
XL
L
GT2 2, 3 and 5 mm
and other pitches
Fiberglass
Tensile
Cords
Polymer Compound Body
10
11
12
13
14
15
16
Nylon
Tooth
Facing
2-98
L TIMING BELTS 3/8" OR 9.525 mm PITCH

BELT WIDTHS
INCH - 1/2 & 3/4
METRIC - 12.5 & 19 mm
NON-MARKING
LOW DUST
RoHS COMPLIANT
PowerGrip TruMotion
R
Inch
MATERIAL:
SPECIFICATIONS:

Breaking Strength:
Working Tension:
Temperature Range:
-40F to +220F (-40C to +104C)
3
.020 R
(0.5 R)
(TYP)
MODIFICATIONS:
.375
(9.525)
.128
(3.25)
.075
(1.9)
.14
(3.56)


BELT WIDTH
5
40
INCH COMPONENT
CATALOG NUMBER
A26R 4No. of
Grooves
Code
Belt Width
Inch
1/2
3/4
Width
Code
050
075
METRIC COMPONENT
CATALOG NUMBER
A26R 4M
No. of
Grooves
Code
Belt Width
mm
12.5
19
Width
Code
125
190
Pitch Length
Groove
Code
Inch
mm
033
036
040
041
042
044
046
047
050
052
053
054
056
058
060
064
066
068
070
072
076
080
084
086
12.375
13.500
15.000
15.375
15.750
16.500
17.250
17.625
18.750
19.500
19.875
20.250
21.000
21.750
22.500
24.000
24.750
25.500
26.250
27.000
28.500
30.000
31.500
32.250
314.33
342.9
381
390.53
400.05
419.1
438.15
447.68
476.25
495.3
504.83
514.35
533.4
552.45
571.5
609.6
628.65
647.7
666.75
685.8
723.9
762
800.1
819.15
Pitch Length
Groove
Code
Inch
mm
092
098
100
104
112
119
120
128
136
144
151
152
155
160
168
176
192
195
218
240
244
252
294
34.500
36.750
37.500
39.000
42.000
44.625
45.000
48.000
51.000
54.000
56.625
57.000
58.125
60.000
63.000
66.000
72.000
73.125
81.750
90.000
91.500
94.500
110.250
876.3
933.45
952.5
990.6
1066.8
1133.5
1143
1219.2
1295.4
1371.6
1438.3
1447.8
1476.38
1524
1600.2
1676.4
1828.8
1857.38
2076.5
2286
2324.1
2400.3
2800.4
6
7
8
9
10
11
12
13
14
15
2-99
16
I
R
T

BELT WIDTHS
INCH - 1/2, 3/4 & 1 in.
METRIC - 12.5, 19 & 25.4 mm
Inch
MATERIAL:
SPECIFICATIONS:
1
2
3
Breaking Strength:
125 lbf per 1/8 in. (175 N per 1 mm) Belt Width; not
representative of the load-carrying capacity of the belt.
Temperature Range:
-30F to +185F (-34C to +85C)
MODIFICATIONS:
.020 R
(0.5 R)
(TYP)

.375
(9.525)
.128
(3.25)
.075
(1.9)
.14
(3.56)
BELT WIDTH
40
6
7
INCH COMPONENT
CATALOG NUMBER
A 6R 4No. of
Grooves
Code
8
9
10
11
Belt Width
Inch
1/2
3/4
1
METRIC COMPONENT
CATALOG NUMBER
A 6R 4M
No. of
Grooves
Code
12
13
Belt Width
mm
12.5
19
25.4
14
Width
Code
125
190
254
Inch
026
029
033
035
036
038
040
041
042
044
045
046
047
050
052
053
054
055
056
058
060
062
063
064
065
066
067
068
9.750
10.875
12.375
13.125
13.500
14.250
15.000
15.375
15.750
16.500
16.875
17.250
17.625
18.750
19.500
19.875
20.250
20.625
21.000
21.750
22.500
23.250
23.625
24.000
24.375
24.750
25.125
25.500
Pitch Length
mm
Groove
Code
Inch
mm
247.65
276.23
314.33
333.38
342.9
361.95
381
390.53
400.05
419.1
428.63
438.15
447.68
476.25
495.3
504.83
514.35
523.88
533.4
552.45
571.5
590.55
600.08
609.6
619.13
628.65
638.18
647.7
069
070
072
074
076
080
081
082
084
085
086
089
090
092
094
096
098
100
104
105
108
112
114
116
117
119
120
123
25.875
26.250
27.000
27.750
28.500
30.000
30.375
30.750
31.500
31.875
32.250
33.375
33.750
34.500
35.250
36.000
36.750
37.500
39.000
39.375
40.500
42.000
42.750
43.500
43.875
44.625
45.000
46.125
657.23
666.75
685.8
704.85
723.9
762
771.53
781.05
800.1
809.63
819.15
847.73
857.25
876.3
895.35
914.4
933.45
952.5
990.6
1000.13
1028.7
1066.8
1085.85
1104.9
1114.43
1133.48
1143
1171.58
15
16
Width
Code
050
075
100
Pitch Length
Groove
Code
2-100

R
Inch
T
1
INCH COMPONENT
CATALOG NUMBER
A 6R 4No. of
Grooves
Code
Belt Width
Inch
1/2
3/4
1
Width
Code
050
075
100
METRIC COMPONENT
CATALOG NUMBER
A 6R 4M
No. of
Grooves
Code
Belt Width
mm
12.5
19
25.4
Width
Code
125
190
254
Pitch Length
Groove
Code
Inch
mm
124
* 126
128
136
140
144
146
151
152
154
155
160
161
165
168
174
176
186
192
194
195
208
210
215
218
228
230
235
46.500
47.250
48.000
51.000
52.500
54.000
54.750
56.625
57.000
57.750
58.125
60.000
60.375
61.875
63.000
65.250
66.000
69.750
72.000
72.750
73.125
78.000
78.750
80.625
81.750
85.500
86.250
88.125
1181.1
1200.15
1219.2
1295.4
1333.5
1371.6
1390.65
1438.28
1447.8
1466.85
1476.38
1524
1533.53
1571.63
1600.2
1657.35
1676.4
1771.65
1828.8
1847.85
1857.38
1981.2
2000.25
2047.88
2076.45
2171.7
2190.75
2238.38
Groove
Code
240
244
250
252
294
340
* 590
Pitch Length
Inch
mm
90.000
91.500
93.750
94.500
110.250
127.500
221.250
2286
2324.1
2381.25
2400.3
2800.35
3238.5
5619.75
2
3
4
5
6
7
8
9
10
11
12
13
14
15
2-101
16
I
R
T
L DOUBLE-SIDED BELTS 3/8" OR 9.525 mm PITCH

BELT WIDTHS
INCH - 1/2, 3/4 & 1 in.
METRIC - 12.5, 19 & 25.4 mm
Inch
MATERIAL:
SPECIFICATIONS:
1
2
Breaking Strength:
Temperature Range:
-30F to +185F (-34C to +85C)
MODIFICATIONS:
3
4
.375
(9.525)

.128
(3.25)

.18
(4.6)
.075
(1.9)
BELT WIDTH
.020 R
(0.5 R)
(TYP)
40
6
7
8
9
10
11
12
INCH COMPONENT
CATALOG NUMBER
A 6R 4-D
No. of
Grooves
Code
Belt Width
Inch
1/2
3/4
1
METRIC COMPONENT
CATALOG NUMBER
A 6R 4MD
No. of
Grooves
Code
13
Belt Width
mm
12.5
19
25.4
14
15
16
Width
Code
050
075
100
2-102
Width
Code
125
190
254
Pitch Length
Groove
Code
Inch
mm
033
040
050
* 056
060
064
068
072
076
080
086
092
098
104
112
120
128
136
144
160
176
12.375
15.000
18.750
21.000
22.500
24.000
25.500
27.000
28.500
30.000
32.250
34.500
36.750
39.000
42.000
45.000
48.000
51.000
54.000
60.000
66.000
314.33
381
476.25
533.4
571.5
609.6
647.7
685.8
723.9
762
819.15
876.3
933.45
990.6
1066.8
1143
1219.2
1295.4
1371.6
1524
1676.4
* To be discontinued when present

stock is depleted.
L PULLEY FLANGES 3/8" OR 9.525 mm PITCH

MATERIAL:
SPECIFICATION:
Inch
T
1
2
3
.090 .010
(2.3 0.25)
I.D. O.D.
.055
(1.4)
6
INCH COMPONENT
Catalog Number
Aluminum
Alloy
A
A
A
A
A
A
A
A
A
A
A
A
A
A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
4-10FA
4-11FA
4-12FA
4-13FA
4-14FA
4-15FA
4-16FA
4-17FA
4-18FA
4-19FA
4-20FA
4-21FA
4-22FA
4-24FA
Steel
A
A
A
A
A
A
A
A
A
A
A
A
A
A
6C
6C
6C
6C
6C
6C
6C
6C
6C
6C
6C
6C
6C
6C
4-10FS
4-11FS
4-12FS
4-13FS
4-14FS
4-15FS
4-16FS
4-17FS
4-18FS
4-19FS
4-20FS
4-21FS
4-22FS
4-24FS
Inch
Metric
Pulley
Grooves
(Ref.)
I.D.
.005
O.D.
1/64
I.D.
0.13
O.D.
0.4
10
11
12
13
14
15
16
17
18
19
20
21
22
24
.976
1.101
1.226
1.276
1.401
1.521
1.578
1.701
1.824
1.910
2.035
2.120
2.241
2.375
1-7/16
1-17/32
1-21/32
1-25/32
1-29/32
2-1/32
2-1/8
2-1/4
2-3/8
2-1/2
2-5/8
2-3/4
2-7/8
3-3/32
24.79
27.96
31.14
32.41
35.58
38.63
40.08
43.2
46.32
48.51
51.68
53.85
56.92
60.32
36.5
38.9
42
45.2
48.4
51.6
53.9
57.1
60.3
63.5
66.6
69.8
73
78.5
8
9
10
11
12
13
14
15
2-103
16
L TIMING PULLEY STOCK 3/8" OR 9.525 mm PITCH

MATERIAL:
SPECIFICATIONS:
Inch
O.D. Tolerance:
From 10 to 17 grooves is +.003/-.000 (+0.08)
1
E
2
O.D. C
5
6
7
8
9
10
11
12
13
14
15
16
Catalog Number
Steel
Aluminum
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
4-10L08
4-11L08
4-12L08
4-12L12
4-13L08
4-14L08
4-14L12
4-15L08
4-15L12
4-16L08
4-16L12
4-17L08
4-18L08
4-18L12
4-19L08
4-20L08
4-20L12
4-21L08
4-21L12
6A 4-22L12
6A 4-23L10
6A 4-24L08
6A 4-24L12
6A 4-26L08
6A 4-28L08
6A 4-28L12
6A 4-29L10
6A 4-30L08
6A 4-30L12
6A 4-32L08
6A 4-32L12
6A 4-34L10
6A 4-36L08
6A 4-36L12
6A 4-40L10
6A 4-42L10
6A 4-44L10
6A 4-48L10
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
6C
6C
6C
6C
6C
6C
6C
6C
6C
6C
6C
6C
6C
4-10L08
4-11L08
4-12L08
4-12L12
4-13L08
4-14L08
4-14L12
4-15L08
4-15L12
4-16L08
4-16L12
4-17L08
4-18L08
6C 4-19L08
6C 4-20L08
6C 4-20L12
6C 4-21L08
6C 4-21L12
6C 4-22L08
6C 4-22L12
6C 4-24L08
6C 4-24L12
6C 4-26L08
6C 4-28L08
6C 4-30L08
6C 4-30L12
6C 4-32L08
6C 4-32L12
6C 4-36L12
Inch
P.D.
O.D.
P.D.
O.D.
C
Shank
Dia.
10
11
12
12
13
14
14
15
15
16
16
17
18
18
19
20
20
21
21
22
22
23
24
24
26
28
28
29
30
30
32
32
34
36
36
40
42
44
48
1.194
1.313
1.432
1.432
1.552
1.671
1.671
1.790
1.790
1.910
1.910
2.029
2.149
2.149
2.268
2.387
2.387
2.507
2.507
2.626
2.626
2.745
2.865
2.865
3.104
3.342
3.342
3.462
3.581
3.581
3.820
3.820
4.058
4.297
4.297
4.775
5.013
5.252
5.730
1.164
1.283
1.402
1.402
1.522
1.641
1.641
1.760
1.760
1.880
1.880
1.999
2.119
2.119
2.238
2.357
2.357
2.477
2.477
2.596
2.596
2.715
2.835
2.835
3.074
3.312
3.312
3.432
3.551
3.551
3.790
3.790
4.028
4.267
4.267
4.745
4.983
5.222
5.700
30.3
33.4
36.4
36.4
39.4
42.4
42.4
45.5
45.5
48.5
48.5
51.5
54.6
54.6
57.6
60.6
60.6
63.7
63.7
66.7
66.7
69.7
72.8
72.8
78.8
84.9
84.9
87.9
91
91
97
97
103.1
109.1
109.1
121.3
127.3
133.4
145.5
29.56
32.59
35.62
35.62
38.65
41.68
41.68
44.72
44.72
47.75
47.75
50.78
53.81
53.81
56.84
59.88
59.88
62.91
62.91
65.94
65.94
68.97
72
72
78.07
84.13
84.13
87.16
90.2
90.2
96.26
96.26
102.32
108.39
108.39
120.51
126.58
132.64
144.77
3/4 (19.1)
3/4 (19.1)
1 (25.4)
1 (25.4)
1 (25.4)
1 (25.4)
1 (25.4)
1 (25.4)
1 (25.4)
1 (25.4)
1 (25.4)
1 (25.4)
1 (25.4)
1 (25.4)
1 (25.4)
1 (25.4)
1 (25.4)
1 (25.4)
1 (25.4)
1 (25.4)
1 (25.4)
1 (25.4)
1 (25.4)
1 (25.4)
1 (25.4)
1 (25.4)
1 (25.4)
1 (25.4)
1 (25.4)
1 (25.4)
1 (25.4)
1 (25.4)
1 (25.4)
1 (25.4)
1 (25.4)
1 (25.4)
1 (25.4)
1 (25.4)
1 (25.4)

2-104
Metric
No. of
Grooves
INCH COMPONENT
E
Shank
Length
L
Min.
Usable
Length
1-1/8 (28.6) 8 (203.2)

1-1/8 (28.6) 8 (203.2)
1-1/8 (28.6) 8 (203.2)
1-1/8 (28.6) 12 (304.8)
1-1/8 (28.6) 8 (203.2)
1-1/8 (28.6) 8 (203.2)
1-1/8 (28.6) 12 (304.8)
8 (203.2)
12 (304.8)
8 (203.2)
12 (304.8)
8 (203.2)
8 (203.2)
12 (304.8)
8 (203.2)
8 (203.2)
12 (304.8)
8 (203.2)
12 (304.8)
1 (25.4)
8 (203.2)
3/4
(19.1)
12 (304.8)
10 (254)
8 (203.2)
12 (304.8)
8 (203.2)
8 (203.2)
12 (304.8)
10 (254)
8 (203.2)
12 (304.8)
8 (203.2)
12 (304.8)
1
(25.4) 10 (254)
1
(25.4) 8 (203.2)
1
(25.4) 12 (304.8)
1
(25.4) 10 (254)
1
(25.4) 10 (254)
1
(25.4) 10 (254)
1
(25.4) 10 (254)
L TIMING BELT PULLEYS 3/8" PITCH

FOR 1/2" BELTS
DOUBLE FLANGE
R
Inch
MATERIAL:
Aluminum Alloy
FINISH:
Clear Anodized
SPECIFICATIONS:
O.D. Tolerance:
10 to 17 grooves is +.003/-.000
18 to 24 grooves is +.004/-.000
Pulleys supplied with 2 set screws at 90.

E
W
D
D/2
F.D. O.D.
SET
SCREW
B C
5
.56 FOR 10 TO 20 TEETH
.59 FOR 21 TO 24 TEETH
INCH COMPONENT
Catalog Number
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
6A
4-10DF05012
4-10DF05016
4-11DF05012
4-11DF05016
4-12DF05012
4-12DF05016
4-13DF05012
4-13DF05016
4-14DF05012
4-14DF05016
4-15DF05012
4-15DF05016
4-16DF05016
4-16DF05020
4-17DF05016
4-17DF05020
4-18DF05016
4-18DF05020
4-19DF05016
4-19DF05020
4-20DF05016
4-20DF05020
4-21DF05016
4-21DF05020
4-22DF05016
4-22DF05020
4-24DF05016
4-24DF05020
No.
of
Grooves
P.D.
10
10
11
11
12
12
13
13
14
14
15
15
16
16
17
17
18
18
19
19
20
20
21
21
22
22
24
24
1.194
1.194
1.313
1.313
1.432
1.432
1.552
1.552
1.671
1.671
1.790
1.790
1.910
1.910
2.029
2.029
2.149
2.149
2.268
2.268
2.387
2.387
2.507
2.507
2.626
2.626
2.865
2.865
O.D.
1.164
1.164
1.283
1.283
1.402
1.402
1.522
1.522
1.641
1.641
1.760
1.760
1.880
1.880
1.999
1.999
2.119
2.119
2.238
2.238
2.357
2.357
2.477
2.477
2.596
2.596
2.835
2.835
F.D.
1/64
1-7/16
1-7/16
1-17/32
1-17/32
1-21/32
1-21/32
1-25/32
1-25/32
1-29/32
1-29/32
2-1/32
2-1/32
2-1/8
2-1/8
2-1/4
2-1/4
2-3/8
2-3/8
2-1/2
2-1/2
2-5/8
2-5/8
2-3/4
2-3/4
2-7/8
2-7/8
3-3/32
3-3/32
B
Bore
+.001
-.000
.375
.500
.375
.500
.375
.500
.375
.500
.375
.500
.375
.500
.500
.625
.500
.625
.500
.625
.500
.625
.500
.625
.500
.625
.500
.625
.500
.625
E
W
Body Length
1/64
23/32
23/32
23/32
23/32
23/32
23/32
23/32
23/32
23/32
23/32
23/32
23/32
23/32
23/32
23/32
23/32
23/32
23/32
23/32
23/32
23/32
23/32
3/4
3/4
3/4
3/4
3/4
3/4
1-1/8
1-1/8
1-1/8
1-1/8
1-3/16
1-3/16
1-3/16
1-3/16
1-3/16
1-3/16
1-1/4
1-1/4
1-1/4
1-1/4
1-1/4
1-1/4
1-1/4
1-1/4
1-5/16
1-5/16
1-5/16
1-5/16
1/3-8
1/3-8
1/3-8
1/3-8
1/3-8
1/3-8
C
Hub
Dia.
1/64
7/8
7/8
1
1
1-1/8
1-1/8
1-1/8
1-1/8
1-1/4
1-1/4
1-3/8
1-3/8
1-3/8
1-3/8
1-1/2
1-1/2
1-5/8
1-5/8
1-11/16
1-11/16
1-13/16
1-13/16
2
2
2-1/8
2-1/8
2-1/4
2-1/4
D
Set
Hub Screw
Proj.
13/32
13/32
13/32
13/32
15/32
15/32
15/32
15/32
15/32
15/32
17/32
17/32
17/32
17/32
17/32
17/32
17/32
17/32
19/32
19/32
19/32
19/32
5/8
5/8
5/8
5/8
5/8
5/8
#10-32
1/4-20
#10-32
1/4-20
#10-32
1/4-20
#10-32
1/4-20
#10-32
1/4-20
#10-32
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
7
8
9
10
11
12
13
14
15
2-105
16
I
R

FOR 1/2" BELTS
DOUBLE FLANGE
Inch
MATERIAL:
Steel
FINISH:
Black Oxide
1
2
SPECIFICATIONS:
O.D. Tolerance:
10 to 17 grooves is +.003/-.000
18 to 32 grooves is +.004/-.000
25/32
D/2
SET SCREW
4
B
F.D. O.D.
5
6
7
8
9
10
11
12
13
14
15
16
INCH COMPONENT
Catalog Number
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
6F
6F
6F
6F
6F
6F
6F
6F
6F
6F
6F
6F
6F
6F
6F
6F
6F
6F
6F
6F
6F
6F
6F
6F
6F
6F
6F
6F
6F
6F
4-10DF5012
4-10DF5016
4-12DF5012
4-12DF5016
4-14DF5012
4-14DF5016
4-16DF5012
4-16DF5016
4-17DF5012
4-17DF5016
4-18DF5012
4-18DF5016
4-19DF5012
4-19DF5016
4-20DF5012
4-20DF5016
4-21DF5012
4-21DF5016
4-22DF5012
4-22DF5016
4-24DF5012
4-24DF5016
4-26DF5012
4-26DF5016
4-28DF5012
4-28DF5016
4-30DF5012
4-30DF5016
4-32DF5012
4-32DF5016
2-106
No.
of
Grooves
P.D.
Ref.
O.D.
10
10
12
12
14
14
16
16
17
17
18
18
19
19
20
20
21
21
22
22
24
24
26
26
28
28
30
30
32
32
1.194
1.194
1.432
1.432
1.671
1.671
1.910
1.910
2.029
2.029
2.149
2.149
2.268
2.268
2.387
2.387
2.507
2.507
2.626
2.626
2.865
2.865
3.104
3.104
3.342
3.342
3.581
3.581
3.820
3.820
1.164
1.164
1.402
1.402
1.641
1.641
1.880
1.880
1.999
1.999
2.119
2.119
2.238
2.238
2.357
2.357
2.477
2.477
2.596
2.596
2.835
2.835
3.074
3.074
3.312
3.312
3.551
3.551
3.790
3.790
F.D.
1/64
1.42
1.42
1.65
1.65
1.89
1.89
2.13
2.13
2.24
2.24
2.36
2.36
2.52
2.52
2.62
2.62
2.76
2.76
2.95
2.95
3.11
3.11
3.39
3.39
3.58
3.58
3.82
3.82
4.02
4.02
B
Bore
+.001
-.000
.375
.500
.375
.500
.375
.500
.375
.500
.375
.500
.375
.500
.375
.500
.375
.500
.375
.500
.375
.500
375
.500
.375
.500
375
.500
.375
.500
.375
.500
E
C
Length Hub Dia.
1/64
1/64
D
Hub
Proj.
1-9/64
1-9/64
1-1/4
1-1/4
1-1/4
1-1/4
1-25/64
1-25/64
1-25/64
1-25/64
1-25/64
1-25/64
1-25/64
1-25/64
1-25/64
1-25/64
1-7/16
1-7/16
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-41/64
1-41/64
.81
.81
1.06
1.06
1.13
1.13
1.44
1.44
1.50
1.50
1.56
1.56
1.63
1.63
1.69
1.69
1.88
1.88
2.00
2.00
2.25
2.25
2.25
2.25
2.25
2.25
2.25
2.25
2.56
2.56
23/64
23/64
31/64
31/64
31/64
31/64
39/64
39/64
39/64
39/64
39/64
39/64
39/64
39/64
39/64
39/64
43/64
43/64
47/64
47/64
47/64
47/64
47/64
47/64
47/64
47/64
47/64
47/64
55/64
55/64
Set
Screw
#10-24
#10-24
#10-24
#10-24
#10-24
#10-24
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20

FOR 1/2" BELTS

R
Inch
MATERIAL:

SPECIFICATIONS:
T
1

do not have webs.
All Pulleys have 2 set screws at 90.
2
1.21
1.21
1/2
1/4
1/2
1/4
O.D. C
SET
SCREW
SET
SCREW
F.D.
O.D. C
F.D.
4
5
9/16
9/16
5/64
Fig. 1
5/64 (TYP)
Fig. 2
INCH COMPONENT
Catalog Number
Fig. 1
Single Flange
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
4-10SF05012
4-10SF05016
4-12SF05012
4-12SF05016
4-16SF05016
4-16SF05020
4-18SF05016
4-18SF05020
4-20SF05016
4-20SF05020
4-24SF05016
4-24SF05020
4-36SF05016
4-36SF05020
4-40SF05016
4-40SF05020
Fig. 2
Double Flange
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
4-10DF05012
4-10DF05016
4-12DF05012
4-12DF05016
4-16DF05016
4-16DF05020
4-18DF05016
4-18DF05020
4-20DF05016
4-20DF05020
4-24DF05016
4-24DF05020
4-36DF05016
4-36DF05020
4-40DF05016
4-40DF05020
No.
of
Grooves
P.D.
O.D.
F.D.
B
Bore
+.001
-.000
C
Hub
Dia.
Set
Screw
10
10
12
12
16
16
18
18
20
20
24
24
36
36
40
40
1.194
1.194
1.432
1.432
1.910
1.910
2.149
2.149
2.387
2.387
2.865
2.865
4.297
4.297
4.775
4.775
1.164
1.164
1.402
1.402
1.880
1.880
2.119
2.119
2.357
2.357
2.835
2.835
4.267
4.267
4.745
4.745
1.44
1.44
1.69
1.69
2.12
2.12
2.37
2.37
2.62
2.62
3.12
3.12
4.53
4.53
5.00
5.00
.375
.500
.375
.500
.500
.625
.500
.625
.500
.625
.500
.625
.500
.625
.500
.625
7/8
7/8
7/8
7/8
1-1/8
1-1/8
1-1/8
1-1/8
1-1/8
1-1/8
1-1/8
1-1/8
1-1/8
1-1/8
1-1/8
1-1/8
#10-32
#10-32
#10-32
#10-32
1/4-28
1/4-28
1/4-28
1/4-28
1/4-28
1/4-28
1/4-28
1/4-28
1/4-28
1/4-28
1/4-28
1/4-28
8
9
10
11
12
13
14
15
2-107
16
I
R
T
1

FOR 3/4" BELTS

Inch
MATERIAL:

SPECIFICATIONS:

do not have webs.
All Pulleys have 2 set screws at 90.
2
3
1.46
1.46
1/2
1/4
SET
SCREW
SET
SCREW
O.D. C
5
6
13/16
F.D.
O.D. C
10
11
12
Fig. 1
Single Flange
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
4-10SF07512
4-10SF07516
4-12SF07512
4-12SF07516
4-16SF07516
4-16SF07520
4-18SF07516
4-18SF07520
4-20SF07516
4-20SF07520
4-24SF07516
4-24SF07520
4-36SF07516
4-36SF07520
4-40SF07516
4-40SF07520
13
14
15
16
F.D.
5/64 (TYP)
Fig. 2
INCH COMPONENT
Catalog Number
13/16
5/64
Fig. 1
1/2
1/4
2-108
Fig. 2
Double Flange
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
4-10DF07512
4-10DF07516
4-12DF07512
4-12DF07516
4-16DF07516
4-16DF07520
4-18DF07516
4-18DF07520
4-20DF07516
4-20DF07520
4-24DF07516
4-24DF07520
4-36DF07516
4-36DF07520
4-40DF07516
4-40DF07520
No.
of
Grooves
P.D.
O.D.
F.D.
B
Bore
+.001
-.000
C
Hub
Dia.
Set
Screw
10
10
12
12
16
16
18
18
20
20
24
24
36
36
40
40
1.194
1.194
1.432
1.432
1.910
1.910
2.149
2.149
2.387
2.387
2.865
2.865
4.297
4.297
4.775
4.775
1.164
1.164
1.402
1.402
1.880
1.880
2.119
2.119
2.357
2.357
2.835
2.835
4.267
4.267
4.745
4.745
1.44
1.44
1.69
1.69
2.12
2.12
2.37
2.37
2.62
2.62
3.12
3.12
4.53
4.53
5.00
5.00
.375
.500
.375
.500
.500
.625
.500
.625
.500
.625
.500
.625
.500
.625
.500
.625
7/8
7/8
7/8
7/8
1-1/8
1-1/8
1-1/8
1-1/8
1-1/8
1-1/8
1-1/8
1-1/8
1-1/8
1-1/8
1-1/8
1-1/8
#10-32
#10-32
#10-32
#10-32
1/4-28
1/4-28
1/4-28
1/4-28
1/4-28
1/4-28
1/4-28
1/4-28
1/4-28
1/4-28
1/4-28
1/4-28

FOR 1/2" BELTS

MOLDED WITH INSERT
DOUBLE FLANGE
R
Inch
MATERIAL:

T
1
2
1-3/64
5/16
35/64
5/32
1-3/64
5/32
B
B
F.D. O.D.
5/16
35/64
F.D. O.D.
#10-24
SET SCREW
#10-24
SET SCREW
Fig. 1
Fig. 1
A
A
A
A
A
A
A
A
Fig. 2
A
A
A
A
A
5
6
Fig. 2
INCH COMPONENT
Catalog Number
No.
of
Grooves
P.D.
O.D.
F.D.
B
Bore
+.001
-.000
C
Hub
Dia.
6E
6E
6E
6E
6E
6E
6E
6E
4-10DF05008
4-11DF05008
4-12DF05008
4-13DF05008
4-14DF05008
4-15DF05008
4-16DF05008
4-17DF05010
10
11
12
13
14
15
16
17
1.194
1.313
1.432
1.552
1.671
1.790
1.910
2.029
1.164
1.283
1.402
1.522
1.641
1.760
1.880
1.999
1.49
1.63
1.75
1.79
2.00
2.12
2.22
2.34
.2505
.2505
.2505
.2505
.2505
.2505
.2505
.313
7/8
7/8
7/8
1
1-1/4
1-1/4
1-1/4
1-1/4
6E
6E
6E
6E
6E
4-18DF05010
4-20DF05010
4-21DF05010
4-22DF05010
4-24DF05010
18
20
21
22
24
2.149
2.387
2.507
2.626
2.865
2.119
2.357
2.477
2.596
2.835
2.47
2.74
2.85
2.95
3.15
.313
.313
.313
.313
.313
1-1/4
1-1/4
1-1/4
1-1/4
1-1/4
8
9
10
11
12
13
14
15
2-109
16
I
R
T

FOR 1/2" BELTS

MOLDED WITH INSERT
SINGLE FLANGE
Inch
MATERIAL:

1
2
3
1
5/16
19/32
5/16
19/32
5/32
5/32
F.D. O.D.
F.D.
#10-24
SET SCREW
Fig. 1
8
9
10
11
12
13
Fig. 2
INCH COMPONENT
Catalog Number
Fig. 1
A
A
A
A
A
A
A
A
Fig. 2
A
A
A
A
A
A
A
A
No.
of
Grooves
P.D.
O.D.
F.D.
B
Bore
+.001
-.000
C
Hub
Dia.
6E
6E
6E
6E
6E
6E
6E
6E
4-10SF05008
4-11SF05008
4-12SF05008
4-13SF05008
4-14SF05008
4-15SF05008
4-16SF05008
4-17SF05010
10
11
12
13
14
15
16
17
1.194
1.313
1.432
1.552
1.671
1.790
1.910
2.029
1.164
1.283
1.402
1.522
1.641
1.760
1.880
1.999
1.49
1.63
1.75
1.79
2.00
2.12
2.22
2.34
.2505
.2505
.2505
.2505
.2505
.2505
.2505
.313
7/8
7/8
7/8
1
1-1/4
1-1/4
1-1/4
1-1/4
6E
6E
6E
6E
6E
6E
6E
6E
4-18SF05010
4-20SF05010
4-21SF05010
4-22SF05010
4-24SF05010
4-28SF05012
4-30SF05012
4-32SF05012
18
20
21
22
24
28
30
32
2.149
2.387
2.507
2.626
2.865
3.342
3.581
3.820
2.119
2.357
2.477
2.596
2.835
3.312
3.551
3.790
2.47
2.74
2.85
2.95
3.15
3.55
3.78
4.05
.313
.313
.313
.313
.313
.3755
.3755
.3755
1-1/4
1-1/4
1-1/4
1-1/4
1-1/4
1-1/4
1-1/4
1-1/4
14
15
16
#10-24
SET SCREW
6
7
O.D.
2-110
SHAFTLOC L PULLEYS 3/8" PITCH

FOR 1/2" BELTS
PATENTED
R
Inch
MATERIAL:

3/4
.70
SPECIFICATION:
Pulleys with 10 to 12
grooves do not have webs.
C
F.D. O.D. C
B
.70
Fig. 1
INCH COMPONENT
Catalog Number
Single Flange
Fig. 1
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
6T
6T
6T
6T
6T
6T
6T
6T
6T
6T
6T
6T
6T
6T
6T
6T
6T
4-H10SF5020
4-H11SF5020
4-H12SF5020
4-H13SF5024
4-H14SF5024
4-H15SF5024
4-H16SF5024
4-H17SF5024
4-H18SF5024
4-H19SF5024
4-H20SF5024
4-H21SF5024
4-H22SF5024
4-H24SF5024
4-H28SF5024
4-H30SF5024
4-H32SF5024
Double Flange
Fig. 2
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
6T
6T
6T
6T
6T
6T
6T
6T
6T
6T
6T
6T
6T
6T
6T
6T
6T
No.
of
Grooves
10 *
11 *
12 *
13
14
15
16
17
18
19
20
21
22
24
28
30
32
4-H10DF5020
4-H11DF5020
4-H12DF5020
4-H13DF5024
4-H14DF5024
4-H15DF5024
4-H16DF5024
4-H17DF5024
4-H18DF5024
4-H19DF5024
4-H20DF5024
4-H21DF5024
4-H22DF5024
4-H24DF5024
4-H28DF5024
4-H30DF5024
4-H32DF5024
35/64
19/32
Fig. 2
P.D.
O.D.
F.D.
1.194
1.313
1.432
1.552
1.671
1.790
1.910
2.029
2.149
2.268
2.387
2.507
2.626
2.865
3.342
3.581
3.820
1.164
1.283
1.402
1.522
1.641
1.760
1.880
1.999
2.119
2.238
2.357
2.477
2.596
2.835
3.312
3.551
3.790
1.49
1.63
1.75
1.79
2.00
2.12
2.22
2.34
2.47
2.57
2.74
2.85
2.95
3.15
3.55
3.78
4.05
B
Bore
+.002
-.000
.625
.625
.625
.750
.750
.750
.750
.750
.750
.750
.750
.750
.750
.750
.750
.750
.750
C
Dia.
3/4
3/4
3/4
1
1
1
1
1
1
1
1
1
1
1
1
1
1
4
5
6
7
8
9
* Only these pulleys require a 3/4 O.D. x 5/8 I.D. x .050 thick washer.
10

(For Shaftloc Introduction and use, see page 2-26)
MATERIAL:
416 Stainless Steel
SPECIFICATIONS:
1. A 3/4 O.D. x 5/8 I.D. x .05

thick washer, Catalog Number
A 7X 8-C20050 is supplied.
2. A 7/8 O.D. x 3/4 I.D. x .05
thick washer, Catalog Number
A 7X 8-C24050 is supplied.
COMPONENT
WIDTH
W
PULLEY
BORE
7/32 7/32
PULLEY
BORE
(REF.)
3/4
(REF.)
DOUBLE
FLANGE
7/32
11
BORE
12
SINGLE
FLANGE
1/4
Fig. 1
(10 to 12 Grooves)
13
1/4
Fig. 2
(13 to 32 Grooves)
INCH COMPONENT
Catalog Number
A 7Z37-030578
A 7Z37-040670
Max.
Shaftloc H
Torque
See Pulley Bore
Bore
Hex
Capacity* * Based on mating components
Above
+.001
(Ref.)
Size
-.000
lbf in.
1
2
.625
.750
.375
.500
3/4
7/8
250
250
being degreased before assembly

with Shaftloc coupling.
2-111
14
15
16
I
R
T
HTD TIMING BELTS 3 mm PITCH

BELT WIDTHS
METRIC - 6, 9 & 15 mm
PROFILE
Metric
Inch
MATERIAL:
101
SPECIFICATIONS:
1
2
3
4
Breaking Strength:
158 N per 1 mm (113 lbf per 1/8 in.) Belt Width;
Working Tension:
285 N for 25.4 mm belt (64 lbf for 1 in. belt).
Temperature Range:
-34C to +85C (-30F to +185F)
3
(.118)
MODIFICATIONS:

1.22
(.048)
2.41
(.095)

5
6
7
8
9
METRIC COMPONENT
CATALOG NUMBER
A 6R23M
No. of
Grooves
Code
Belt Width
mm
6 (.236)
9 (.354)
15 (.591)
10
11
12
13
14
15
16
Width
Code
060
090
150
Groove
Code
029
034
035
036
037
040
041
042
043
044
045
047
048
049
050
051
052
053
054
055
056
057
058
059
060
061
062
063
064
065
066
067
Pitch Length
mm
Inch
Groove
Code
87
102
105
108
111
120
123
126
129
132
135
141
144
147
150
153
156
159
162
165
168
171
174
177
180
183
186
189
192
195
198
201
3.425
4.016
4.134
4.252
4.370
4.724
4.843
4.961
5.079
5.197
5.315
5.551
5.669
5.787
5.906
6.024
6.142
6.260
6.378
6.496
6.614
6.732
6.850
6.968
7.087
7.205
7.323
7.441
7.559
7.677
7.795
7.913
068
069
070
071
072
073
074
075
076
078
079
080
081
082
083
084
085
086
087
088
089
090
092
093
094
095
096
097
098
099
100
101
Pitch Length
mm
Inch
204
207
210
213
216
219
222
225
228
234
237
240
243
246
249
252
255
258
261
264
267
270
276
279
282
285
288
291
294
297
300
303
8.031
8.150
8.268
8.386
8.504
8.622
8.740
8.858
8.976
9.213
9.331
9.449
9.567
9.685
9.803
9.921
10.039
10.157
10.276
10.394
10.512
10.630
10.866
10.984
11.102
11.220
11.339
11.457
11.575
11.693
11.811
11.929
2-112

R
Metric
Inch
0
Groove
Code
102
103
104
105
106
108
109
110
111
112
113
114
115
117
119
120
121
122
123
124
125
127
128
129
130
131
132
133
134
135
137
139
140
141
142
144
145
146
147
148
149
153
154
155
156
157
158
159
160
161
162
163
164
167
Pitch Length
mm
Inch
Groove
Code
306
309
312
315
318
324
327
330
333
336
339
342
345
351
357
360
363
366
369
372
375
381
384
387
390
393
396
399
402
405
411
417
420
423
426
432
435
438
441
444
447
459
462
465
468
471
474
477
480
483
486
489
492
501
12.047
12.165
12.283
12.402
12.520
12.756
12.874
12.992
13.110
13.228
13.346
13.465
13.583
13.819
14.055
14.173
14.291
14.409
14.528
14.646
14.764
15.000
15.118
15.236
15.354
15.472
15.591
15.709
15.827
15.945
16.181
16.417
16.535
16.654
16.772
17.008
17.126
17.244
17.362
17.480
17.598
18.071
18.189
18.307
18.425
18.543
18.661
18.779
18.898
19.016
19.134
19.252
19.370
19.724
168
170
171
172
173
174
175
176
177
179
183
184
186
188
189
190
191
192
193
194
195
197
198
199
200
202
203
204
209
211
213
215
216
217
218
219
220
221
222
223
224
227
228
229
231
232
233
234
235
237
240
241
244
245
Pitch Length
mm
Inch
504
510
513
516
519
522
525
528
531
537
549
552
558
564
567
570
573
576
579
582
585
591
594
597
600
606
609
612
627
633
639
645
648
651
654
657
660
663
666
669
672
681
684
687
693
696
699
702
705
711
720
723
732
735
19.843
20.079
20.197
20.315
20.433
20.551
20.669
20.787
20.905
21.142
21.614
21.732
21.968
22.205
22.323
22.441
22.559
22.677
22.795
22.913
23.031
23.268
23.386
23.504
23.622
23.858
23.976
24.094
24.685
24.921
25.157
25.394
25.512
25.630
25.748
25.866
25.984
26.102
26.221
26.339
26.457
26.811
26.929
27.047
27.283
27.402
27.520
27.638
27.756
27.992
28.346
28.465
28.819
28.937
Groove
Code
246
250
251
261
265
268
274
275
279
281
286
287
291
294
297
300
305
312
315
317
327
334
342
345
346
350
352
354
356
357
360
362
370
375
385
396
397
409
415
420
421
445
500
504
510
523
529
600
621
630
642
652
668
101
Pitch Length
mm
Inch
738
750
753
783
795
804
822
825
837
843
858
861
873
882
891
900
915
936
945
951
981
1002
1026
1035
1038
1050
1056
1062
1068
1071
1080
1086
1110
1125
1155
1188
1191
1227
1245
1260
1263
1335
1500
1512
1530
1569
1587
1800
1863
1890
1926
1956
2004
29.055
29.528
29.646
30.827
31.299
31.653
32.362
32.480
32.953
33.189
33.780
33.898
34.370
34.724
35.079
35.433
36.024
36.850
37.205
37.441
38.622
39.449
40.394
40.748
40.866
41.339
41.575
41.811
42.047
42.165
42.520
42.756
43.701
44.291
45.472
46.772
46.890
48.307
49.016
49.606
49.724
52.559
59.055
59.527
60.236
61.772
62.480
70.866
73.346
74.409
75.827
77.008
78.897
2-113
T
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
I
R
T
HTD DOUBLE-SIDED TIMING BELTS 3 mm PITCH

BELT WIDTHS
METRIC - 6, 9 & 15 mm
PROFILE
Metric
Inch
MATERIAL:
101
SPECIFICATIONS:
1
2
3
4
5
Breaking Strength:
Working Tension:
Temperature Range:
-34C to +85C (-30F to +185F)
3
(.118)
MODIFICATIONS:
1.22
(.048)
3.2
(.126)
Pulleys are available with metric

or inch standards.
6
7
8
9
METRIC COMPONENT
CATALOG NUMBER
A 6R23MD
No. of
Grooves
Code
Belt Width
mm
6 (.236)
9 (.354)
15 (.591)
10
11
12
13
14
132
133
135
137
140
142
144
145
149
155
156
157
158
160
162
163
164
167
168
170
171
175
176
177
179
184
Pitch Length
mm
Inch
Groove
Code
396
399
405
411
420
426
432
435
447
465
468
471
474
480
486
489
492
501
504
510
513
525
528
531
537
552
15.591
15.709
15.945
16.181
16.535
16.772
17.008
17.126
17.598
18.307
18.425
18.543
18.661
18.898
19.134
19.252
19.370
19.724
19.843
20.079
20.197
20.669
20.787
20.905
21.142
21.732
186
188
190
192
195
197
199
200
202
203
204
209
211
213
215
216
219
221
223
228
229
232
237
245
246
250
Pitch Length
mm
Inch
558
564
570
576
585
591
597
600
606
609
612
627
633
639
645
648
657
663
669
684
687
696
711
735
738
750
21.968
22.205
22.441
22.677
23.031
23.268
23.504
23.622
23.858
23.976
24.094
24.685
24.921
25.157
25.394
25.512
25.866
26.102
26.339
26.929
27.047
27.402
27.992
28.937
29.055
29.528
15
16
Width
Code
060
090
150
Groove
Code
2-114

Metric
Inch
101
R
T
1
METRIC COMPONENT
CATALOG NUMBER
A 6R23MD
No. of
Grooves
Code
Belt Width
mm
6 (.236)
9 (.354)
15 (.591)
Width
Code
060
090
150
Groove
Code
251
265
274
279
281
291
294
297
300
305
315
327
334
342
345
347
352
354
375
385
397
421
500
504
523
529
600
652
668
Pitch Length
mm
Inch
753
795
822
837
843
873
882
891
900
915
945
981
1002
1026
1035
1041
1056
1062
1125
1155
1191
1263
1500
1512
1569
1587
1800
1956
2004
29.646
31.299
32.362
32.953
33.189
34.370
34.724
35.079
35.433
36.024
37.205
38.622
39.449
40.394
40.748
40.984
41.575
41.811
44.291
45.472
46.890
49.724
59.055
59.527
61.772
62.480
70.866
77.008
78.897
2
3
4
5
6
7
8
9
10
11
12
13
14
15
2-115
16
HTD PULLEY FLANGES 3 mm PITCH

FOR
PROFILE
MATERIAL:
Metric
Inch
SPECIFICATION:
101
1
2
H
3
d
METRIC COMPONENT
Catalog Number
Aluminum
Alloy
6
7
8
9
10
11
12
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
6A22M010FA
6A22M011FA
6A22M012FA
6A22M013FA
6A22M014FA
6A22M015FA
6A22M016FA
6A22M017FA
6A22M018FA
6A22M019FA
6A22M020FA
6A22M022FA
6A22M024FA
6A22M025FA
6A22M026FA
6A22M028FA
6A22M030FA
6A22M032FA
6A22M034FA
6A22M036FA
6A22M038FA
6A22M040FA
6A22M044FA
Steel
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
6C22M010FS
6C22M011FS
6C22M012FS
6C22M013FS
6C22M014FS
6C22M015FS
6C22M016FS
6C22M017FS
6C22M018FS
6C22M019FS
6C22M020FS
6C22M022FS
6C22M024FS
6C22M025FS
6C22M026FS
6C22M028FS
6C22M030FS
6C22M032FS
6C22M034FS
6C22M036FS
6C22M038FS
6C22M040FS
6C22M044FS
13
14
15
16
2-116
Pulley
Grooves
Ref.
10
11
12
13
14
15
16
17
18
19
20
22
24
25
26
28
30
32
34
36
38
40
44
Metric
d
Dia.
0.08
6.2
6.86
8.18
8.89
9.5
10.82
11.48
11.48
12.8
13.46
14.58
15.9
17.88
18.75
19.66
21.56
23.47
25.38
27.28
29.18
31.12
33.02
36.83
D
Dia.
0.4
12.8
13.5
14.7
15.5
16.1
17.4
18
18.8
20
20.7
22.7
24
26
26.9
28.1
29.8
31.8
33.6
35.5
37.4
39.4
41.3
45.1
Inch
d
Dia.
.003
.244
.270
.322
.350
.374
.426
.452
.452
.504
.530
.574
.626
.704
.738
.774
.849
.924
.999
1.074
1.149
1.225
1.300
1.450
D
Dia.
.015
.505
.530
.580
.610
.635
.685
.710
.740
.790
.815
.895
.945
1.025
1.060
1.105
1.173
1.250
1.323
1.398
1.473
1.549
1.625
1.775
H
Width
0.25
( .010)
1.14 (.045)
1.14 (.045)
1.14 (.045)
1.32 (.052)
1.32 (.052)
1.32 (.052)
1.32 (.052)
1.32 (.052)
1.32 (.052)
1.32 (.052)
1.32 (.052)
1.32 (.052)
1.32 (.052)
1.32 (.052)
1.32 (.052)
1.32 (.052)
1.32 (.052)
1.32 (.052)
1.52 (.060)
1.52 (.060)
1.52 (.060)
1.52 (.060)
1.52 (.060)
S
Thickness
0.64 (.025)
0.64 (.025)
0.64 (.025)
0.81 (.032)
0.81 (.032)
0.81 (.032)
0.81 (.032)
0.81 (.032)
0.81 (.032)
0.81 (.032)
0.81 (.032)
0.81 (.032)
0.81 (.032)
0.81 (.032)
0.81 (.032)
0.81 (.032)
0.81 (.032)
0.81 (.032)
1.02 (.040)
1.02 (.040)
1.02 (.040)
1.02 (.040)
1.02 (.040)
HTD TIMING PULLEY STOCK 3 mm PITCH

PROFILE
MATERIAL:
Metric
Aluminum Alloy
SPECIFICATIONS:
10
D Tolerance:
9 to 27 grooves is +0.05/0 (+.002/-.000)
28 to 35 grooves is +0.08/0 (+.003/-.000)
R
T
1
L1
D D1
4
METRIC COMPONENT
Catalog Number
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
6A22M009TM08
6A22M010TM08
6A22M011TM08
6A22M012TM10
6A22M013TM10
6A22M014TM10
6A22M015TM10
6A22M016TM13
6A22M017TM13
6A22M018TM13
6A22M019TM13
6A22M020TM15
6A22M021TM15
6A22M022TM15
6A22M023TM15
6A22M024TM15
6A22M025TM15
6A22M026TM15
6A22M027TM15
6A22M028TM15
6A22M029TM15
6A22M030TM18
6A22M031TM18
6A22M032TM18
6A22M033TM18
6A22M034TM18
6A22M035TM18
Metric
No.
of
Grooves
P.D.
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
8.6
9.5
10.5
11.5
12.4
13.4
14.3
15.3
16.2
17.2
18.1
19.1
20.1
21
22
22.9
23.9
24.8
25.8
26.7
27.7
28.6
29.6
30.6
31.5
32.5
33.4
D
Dia.
7.83
8.79
9.74
10.7
11.65
12.61
13.56
14.52
15.47
16.43
17.38
18.34
19.29
20.25
21.2
22.16
23.11
24.07
25.02
25.98
26.93
27.89
28.84
29.8
30.75
31.71
32.66
Inch
P.D.
.338
.376
.414
.451
.489
.526
.564
.602
.639
.677
.714
.752
.790
.827
.865
.902
.940
.977
1.015
1.053
1.090
1.128
1.165
1.203
1.241
1.278
1.316
D
Dia.
.308
.346
.384
.421
.459
.496
.534
.572
.609
.647
.684
.722
.760
.797
.835
.872
.910
.947
.985
1.023
1.060
1.098
1.135
1.173
1.211
1.248
1.286
D1 *
Shank
Dia.
4.7 (3/16)
4.7 (3/16)
6.3 (1/4)
6.3 (1/4)
7.9 (5/16)
7.9 (5/16)
9.5 (3/8)
9.5 (3/8)
12.7 (1/2)
12.7 (1/2)
12.7 (1/2)
12.7 (1/2)
12.7 (1/2)
12.7 (1/2)
12.7 (1/2)
12.7 (1/2)
12.7 (1/2)
12.7 (1/2)
12.7 (1/2)
12.7 (1/2)
12.7 (1/2)
12.7 (1/2)
12.7 (1/2)
12.7 (1/2)
12.7 (1/2)
12.7 (1/2)
12.7 (1/2)
L1
Shank
Length
(Ref.)
25 (1)
25 (1)
25 (1)
22 (7/8)
22 (7/8)
22 (7/8)
22 (7/8)
25
(1)
19
(3/4)
L
Min.
Usable
Length
75 (3)
75 (3)
75 (3)
100 (4)
100 (4)
100 (4)
100 (4)
125 (5)
125 (5)
125 (5)
125 (5)
150 (6)
150 (6)
150 (6)
150 (6)
150 (6)
150 (6)
150 (6)
150 (6)
150 (6)
150 (6)
175 (7)
175 (7)
175 (7)
175 (7)
175 (7)
175 (7)

* Shank Diameter of 9.5 (3/8) for pulleys with 9 to 12 grooves may be substituted at SDP option.
Shank Diameter of 11.1 (7/16) for pulleys with 13 & 14 grooves may be substituted at SDP option.
7
8
9
10
11
12
13
14
15
2-117
REV: 04.10.12 mh
16

PROFILE
MATERIAL:
Metric
Aluminum Alloy
SPECIFICATIONS:
10
D Tolerance:
36 to 52 grooves is +0.08/0 (+.003/-.000)
54 to 100 grooves is +0.10/0 (+.004/-.000)
110 to 160 grooves is +0.13/0 (+.005/-.000)
R
T
1
Dimensions in [ ] may be substituted

at SDP option.
25 (1)
[19 (3/4)]

200 (8)
2
3
D D1
4
METRIC COMPONENT
Catalog Number
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
Metric
No.
of
Grooves
P.D.
36
37
38
39
40
42
44
45
48
50
52
54
56
60
62
64
66
68
70
72
75
80
90
100
110
120
130
140
150
160
34.4
35.3
36.3
37.2
38.2
40.1
42
43
45.8
47.7
49.7
51.6
53.5
57.3
59.2
61.1
63
64.9
66.8
68.8
71.6
76.4
85.9
95.5
105
114.6
124.1
133.7
143.2
152.8
6A22M036TM20
6A22M037TM20
6A22M038TM20
6A22M039TM20
6A22M040TM20
6A22M042TM20
6A22M044TM20
6A22M045TM20
6A22M048TM20
6A22M050TM20
6A22M052TM20
6A22M054TM20
6A22M056TM20
6A22M060TM20
6A22M062TM20
6A22M064TM20
6A22M066TM20
6A22M068TM20
6A22M070TM20
6A22M072TM20
6A22M075TM20
6A22M080TM20
6A22M090TM20
6A22M100TM20
6A22M110TM20
6A22M120TM20
6A22M130TM20
6A22M140TM20
6A22M150TM20
6A22M160TM20
Inch
D
Dia.
33.62
34.57
35.53
36.48
37.44
39.35
41.25
42.21
45.07
46.98
48.89
50.8
52.71
56.53
58.44
60.35
62.26
64.17
66.08
67.99
70.86
75.63
85.18
94.73
104.28
113.83
123.38
132.93
142.48
152.03
P.D.
1.353
1.391
1.429
1.466
1.504
1.579
1.654
1.692
1.805
1.880
1.955
2.030
2.105
2.256
2.331
2.406
2.481
2.556
2.632
2.707
2.820
3.008
3.384
3.760
4.136
4.511
4.887
5.263
5.639
6.015
D
Dia.
1.323
1.361
1.399
1.436
1.474
1.549
1.624
1.662
1.775
1.850
1.925
2.000
2.075
2.226
2.301
2.376
2.451
2.526
2.602
2.677
2.790
2.978
3.354
3.730
4.106
4.481
4.857
5.233
5.609
5.985
D1
Shank
Dia.
12.7 (1/2)
12.7 (1/2)
12.7 (1/2)
12.7 (1/2)
12.7 (1/2)
12.7 (1/2)
12.7 (1/2)
12.7 (1/2)
12.7 (1/2)
19.1 (3/4)
19.1 (3/4)
19.1 (3/4)
19.1 (3/4)
19.1 (3/4)
19.1 (3/4)
19.1 (3/4)
19.1 (3/4)
19.1 (3/4)
19.1 (3/4)
19.1 (3/4)
19.1 (3/4)
19.1 (3/4)
19.1 (3/4)
25.4 (1)
25.4 (1)
25.4 (1)
25.4 (1)
25.4 (1)
25.4 (1)
25.4 (1)
5
6
7
8
9
10
11
12
13
14
15
2-118
REV: 04.10.12 mh
16

PROFILE
MATERIAL:
Metric
Inch
Carbon Steel
SPECIFICATIONS:
101
D Tolerance:
9 to 27 grooves is +0.05/0 (+.002/-.000)
28 to 35 grooves is +0.08/0 (+.003/-.000)
T
1
L1
D D1
4
METRIC COMPONENT
Catalog Number
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
6C22M009TM08
6C22M010TM08
6C22M011TM08
6C22M012TM10
6C22M013TM10
6C22M014TM10
6C22M015TM10
6C22M016TM13
6C22M017TM13
6C22M018TM13
6C22M019TM13
6C22M020TM15
6C22M021TM15
6C22M022TM15
6C22M023TM15
6C22M024TM15
6C22M025TM15
6C22M026TM15
6C22M027TM15
6C22M028TM15
6C22M029TM15
6C22M030TM18
6C22M031TM18
6C22M032TM18
6C22M033TM18
6C22M034TM18
6C22M035TM18
Metric
No.
of
Grooves
P.D.
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
8.6
9.5
10.5
11.5
12.4
13.4
14.3
15.3
16.2
17.2
18.1
19.1
20.1
21
22
22.9
23.9
24.8
25.8
26.7
27.7
28.6
29.6
30.6
31.5
32.5
33.4
D
Dia.
7.83
8.79
9.74
10.7
11.65
12.61
13.56
14.52
15.47
16.43
17.38
18.34
19.29
20.25
21.2
22.16
23.11
24.07
25.02
25.98
26.93
27.89
28.84
29.8
30.75
31.71
32.66

Inch
P.D.
.338
.376
.414
.451
.489
.526
.564
.602
.639
.677
.714
.752
.790
.827
.865
.902
.940
.977
1.015
1.053
1.090
1.128
1.165
1.203
1.241
1.278
1.316
D
Dia.
.308
.346
.384
.421
.459
.496
.534
.572
.609
.647
.684
.722
.760
.797
.835
.872
.910
.947
.985
1.023
1.060
1.098
1.135
1.173
1.211
1.248
1.286
D1
Shank
Dia.
9.5 (3/8)
9.5 (3/8)
9.5 (3/8)
9.5 (3/8)
11.1 (7/16)
11.1 (7/16)
12.7 (1/2)
12.7 (1/2)
12.7 (1/2)
12.7 (1/2)
12.7 (1/2)
12.7 (1/2)
12.7 (1/2)
12.7 (1/2)
12.7 (1/2)
12.7 (1/2)
12.7 (1/2)
12.7 (1/2)
12.7 (1/2)
12.7 (1/2)
12.7 (1/2)
12.7 (1/2)
12.7 (1/2)
12.7 (1/2)
12.7 (1/2)
12.7 (1/2)
12.7 (1/2)
L
Min.
Usable
Length
L1
Shank
Length
(Ref.)
25 (1)
25 (1)
25 (1)
22 (7/8)
22 (7/8)
22 (7/8)
22 (7/8)
25
(1)
19
[ (3/4)
]
75 (3)
75 (3)
75 (3)
100 (4)
100 (4)
100 (4)
100 (4)
125 (5)
125 (5)
125 (5)
125 (5)
150 (6)
150 (6)
150 (6)
150 (6)
150 (6)
150 (6)
150 (6)
150 (6)
150 (6)
150 (6)
175 (7)
175 (7)
175 (7)
175 (7)
175 (7)
175 (7)
5
6
7
8
9
10
11
12
13
14
15
2-119
16

PROFILE
MATERIAL:
Metric
Inch
Carbon Steel
T
1
SPECIFICATIONS:
101
D Tolerance:
36 to 52 grooves is +0.08/0 (+.003/-.000)
54 to 100 grooves is +0.10/0 (+.004/-.000)
110 to 160 grooves is +0.13/0 (+.005/-.000)

200 (8)
25 (1)
[19 (3/4)]
3
D D1
4
5
METRIC COMPONENT
Catalog Number
6
7
8
9
10
11
12
13
14
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
6C22M036TM20
6C22M037TM20
6C22M038TM20
6C22M039TM20
6C22M040TM20
6C22M042TM20
6C22M044TM20
6C22M045TM20
6C22M048TM20
6C22M050TM20
6C22M052TM20
6C22M054TM20
6C22M056TM20
6C22M060TM20
6C22M062TM20
6C22M064TM20
6C22M066TM20
6C22M068TM20
6C22M070TM20
6C22M072TM20
6C22M075TM20
6C22M080TM20
6C22M090TM20
6C22M100TM20
6C22M110TM20
6C22M120TM20
6C22M130TM20
6C22M140TM20
6C22M150TM20
6C22M160TM20
P.D.
36
37
38
39
40
42
44
45
48
50
52
54
56
60
62
64
66
68
70
72
75
80
90
100
110
120
130
140
150
160
34.4
35.3
36.3
37.2
38.2
40.1
42
43
45.8
47.7
49.7
51.6
53.5
57.3
59.2
61.1
63
64.9
66.8
68.8
71.6
76.4
85.9
95.5
105
114.6
124.1
133.7
143.2
152.8

15
16
Metric
No.
of
Grooves
2-120
Inch
D
Dia.
33.62
34.57
35.53
36.48
37.44
39.35
41.25
42.21
45.07
46.98
48.89
50.8
52.71
56.53
58.44
60.35
62.26
64.17
66.08
67.99
70.86
75.63
85.18
94.73
104.28
113.83
123.38
132.93
142.48
152.03
P.D.
1.353
1.391
1.429
1.466
1.504
1.579
1.654
1.692
1.805
1.880
1.955
2.030
2.105
2.256
2.331
2.406
2.481
2.556
2.632
2.707
2.820
3.008
3.384
3.760
4.136
4.511
4.887
5.263
5.639
6.015
D
Dia.
1.323
1.361
1.399
1.436
1.474
1.549
1.624
1.662
1.775
1.850
1.925
2.000
2.075
2.226
2.301
2.376
2.451
2.526
2.602
2.677
2.790
2.978
3.354
3.730
4.106
4.481
4.857
5.233
5.609
5.985
D1
Shank
Dia.
12.7 (1/2)
12.7 (1/2)
12.7 (1/2)
12.7 (1/2)
12.7 (1/2)
12.7 (1/2)
12.7 (1/2)
19.1
(3/4)
19.1 (3/4)
19.1 (3/4)
19.1 (3/4)
19.1 (3/4)
19.1 (3/4)
19.1 (3/4)
19.1 (3/4)
19.1 (3/4)
19.1 (3/4)
19.1 (3/4)
19.1 (3/4)
19.1 (3/4)
19.1 (3/4)
19.1 (3/4)
25.4 (1)
25.4 (1)
25.4 (1)
25.4 (1)
25.4 (1)
25.4 (1)
25.4 (1)
HTD TIMING BELT PULLEYS 3 mm PITCH

FOR 6 mm BELTS (.236 INCH)

FAIRLOC HUB
DOUBLE FLANGE
PROFILE
R
Inch
MATERIAL:
Aluminum Alloy
FINISH:
Clear Anodized
SPECIFICATIONS:
O.D. Tolerance:
10 to 26 grooves is +.002/-.000
30 to 44 grooves is +.003/-.000
CAP
SCREW
B
C
F.D. O.D.
Fig. 1
A
A
A
A
A
A
A
A
Fig. 2
A
A
A
A
A
A
A
A
A
O.D.
F.D.
1/64
.29
Fig. 1
No.
of
P.D.
Grooves
.29
INCH COMPONENT
D CAP
SCREW
F.D. O.D.
Catalog Number
Fig. 2
B
Bore
+.001
-.000
6D23-010DF0604
6D23-012DF0606
6D23-014DF0606
6D23-015DF0606
6D23-016DF0606
6D23-018DF0608
6D23-020DF0608
6D23-022DF0608
10
12
14
15
16
18
20
22
.376
.451
.526
.564
.602
.677
.752
.827
.346
.421
.496
.534
.572
.647
.722
.797
.505
.580
.635
.685
.710
.790
.895
.945
.125
.1875
.1875
.1875
.1875
.250
.250
.250
6D23-024DF0608
6D23-025DF0608
6D23-026DF0608
6D23-030DF0608
6D23-032DF0608
6D23-034DF0608
6D23-036DF0608
6D23-040DF0608
6D23-044DF0608
24
25
26
30
32
34
36
40
44
.902
.940
.977
1.128
1.203
1.278
1.353
1.504
1.654
.872
.910
.947
1.098
1.173
1.248
1.323
1.474
1.624
1.025
1.060
1.105
1.250
1.323
1.398
1.473
1.625
1.775
.250
.250
.250
.250
.250
.250
.250
.250
.250
C
Hub
Dia.
D
Cap
Hub Screw
Proj.
9/16
9/16
9/16
9/16
9/16
11/16
11/16
11/16
.480
.580
.625
.625
.625
.625
.625
.625
15/64
15/64
15/64
15/64
15/64
11/32
11/32
11/32
#2-56
#2-56
#2-56
#2-56
#2-56
#2-56
#2-56
#2-56
11/16
11/16
11/16
11/16
11/16
23/32
23/32
23/32
23/32
.625
.625
.625
.750
.750
.750
.750
.750
.750
19/64
19/64
19/64
19/64
19/64
5/16
5/16
5/16
5/16
#2-56
#2-56
#2-56
#4-40
#4-40
#4-40
#4-40
#4-40
#4-40
E
W
Body Length
1/64
.386
.386
.386
.386
.386
.407
.407
.407
.407
1/64
5
6
7
8
9
10
11
12
13
14
15
2-121
16
I
R
T


DOUBLE FLANGE
PROFILE
Inch
MATERIAL:
Aluminum Alloy
FINISH:
Clear Anodized
SPECIFICATIONS:
O.D. Tolerance:
10 to 26 grooves is +.002/-.000
28 to 44 grooves is +.003/-.000

have 1 set screw; others have
2 set screws at 90.
SET
SCREW
D
D/2
D
D/2
SET
SCREW
.28
C B
F.D. O.D.
O.D. F.D.
B C
.28
Fig. 1
6
7
8
9
10
11
12
13
14
INCH COMPONENT
Catalog Number
Fig. 1
A
A
A
A
A
A
A
A
A
A
Fig. 2
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
No.
of
P.D.
Grooves
O.D.
F.D.
1/64
B
Bore
+.001
-.000
E
W
Body Length
1/64
C
Hub
Dia.
1/64
D
Set
Hub Screw
Proj.
6A23-010DF0604
6A23-010DF0606
6A23-011DF0604
6A23-012DF0606
6A23-013DF0606
6A23-014DF0606
6A23-015DF0606
6A23-015DF0608
6A23-016DF0606
6A23-017DF0606
10
10
11
12
13
14
15
15
16
17
.376
.376
.414
.451
.489
.526
.564
.564
.602
.639
.346
.346
.384
.421
.459
.496
.534
.534
.572
.609
.505
.505
.530
.580
.610
.635
.685
.685
.710
.740
.125
.1875
.125
.1875
.1875
.1875
.1875
.250
.1875
.1875
9/16
9/16
9/16
9/16
9/16
9/16
9/16
9/16
9/16
9/16
.505
.505
.530
.580
.610
.635
.685
.685
.710
.740
15/64
15/64
15/64
15/64
15/64
15/64
15/64
15/64
15/64
15/64
#4-40
#4-40
#4-40
#6-40
#6-40
#6-40
#6-40
#6-40
#6-40
#6-40
6A23-018DF0608
6A23-019DF0608
6A23-020DF0608
6A23-022DF0608
6A23-024DF0608
6A23-025DF0608
6A23-026DF0608
6A23-028DF0608
6A23-030DF0608
6A23-032DF0608
6A23-034DF0608
6A23-036DF0608
6A23-038DF0608
6A23-040DF0608
6A23-044DF0608
18
19
20
22
24
25
26
28
30
32
34
36
38
40
44
.677
.714
.752
.827
.902
.940
.977
1.053
1.128
1.203
1.278
1.353
1.429
1.504
1.654
.647
.684
.722
.797
.872
.910
.947
1.023
1.098
1.173
1.248
1.323
1.399
1.474
1.624
.790
.815
.895
.945
1.025
1.060
1.105
1.173
1.250
1.323
1.398
1.473
1.549
1.625
1.775
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
.386
.386
.386
.386
.386
.386
.386
.386
.386
.386
.407
.407
.407
.407
.407
11/16
11/16
11/16
11/16
11/16
11/16
11/16
11/16
11/16
11/16
23/32
23/32
23/32
23/32
23/32
.442
.468
.500
.562
.625
.625
.625
.701
.776
.851
.921
1.000
1.075
1.150
1.300
19/64
19/64
19/64
19/64
19/64
19/64
19/64
19/64
19/64
19/64
5/16
5/16
5/16
5/16
5/16
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
15
16
Fig. 2
2-122


NO FLANGE
PROFILE
R
Inch
MATERIAL:
Aluminum Alloy
FINISH:
Clear Anodized
SPECIFICATIONS:
O.D. Tolerance:
18 to 26 grooves is +.002/-.000
28 to 50 grooves is +.003/-.000
56 to 80 grooves is +.004/-.000
2
#8-32
SET
SCREW
D
D/2
B C
O.D.
5
6
INCH COMPONENT
Catalog Number
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
6A23-018NF0608
6A23-019NF0608
6A23-020NF0608
6A23-022NF0608
6A23-024NF0608
6A23-025NF0608
6A23-026NF0608
6A23-028NF0608
6A23-030NF0608
6A23-032NF0608
6A23-034NF0608
6A23-036NF0608
6A23-038NF0608
6A23-040NF0608
6A23-044NF0608
6A23-045NF0610
6A23-048NF0610
6A23-050NF0610
6A23-056NF0610
6A23-060NF0610
6A23-062NF0610
6A23-068NF0610
6A23-072NF0610
6A23-080NF0610
No.
of
Grooves
P.D.
O.D.
18
19
20
22
24
25
26
28
30
32
34
36
38
40
44
45
48
50
56
60
62
68
72
80
.677
.714
.752
.827
.902
.940
.977
1.053
1.128
1.203
1.278
1.353
1.429
1.504
1.654
1.692
1.805
1.880
2.105
2.256
2.331
2.556
2.707
3.008
.647
.684
.722
.797
.872
.910
.947
1.023
1.098
1.173
1.248
1.323
1.399
1.474
1.624
1.662
1.775
1.850
2.075
2.226
2.301
2.526
2.677
2.978
B
Bore
+.001
-.000
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
.3125
.3125
.3125
.3125
.3125
.3125
.3125
.3125
.3125
F
Face
Width
E
Length
.386
.386
.386
.386
.386
.386
.386
.386
.386
.386
.407
.407
.407
.407
.407
.407
.407
.407
.407
.407
.407
.407
.407
.407
11/16
11/16
11/16
11/16
11/16
11/16
11/16
11/16
11/16
11/16
23/32
23/32
23/32
23/32
23/32
47/64
47/64
47/64
47/64
47/64
47/64
47/64
47/64
47/64
1/64
C
Hub
Dia.
1/64
.442
.468
.500
.562
.625
.625
.625
.701
.776
.851
.921
1.000
1.075
1.150
1.300
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
D
Hub
Proj.
19/64
19/64
19/64
19/64
19/64
19/64
19/64
19/64
19/64
19/64
5/16
5/16
5/16
5/16
5/16
21/64
21/64
21/64
21/64
21/64
21/64
21/64
21/64
21/64
7
8
9
10
11
12
13
14
15
2-123
16
I
R
T


DOUBLE FLANGE
PROFILE
Inch
MATERIAL:
Aluminum Alloy
FINISH:
Clear Anodized
SPECIFICATION:
O.D. Tolerance:
10 to 26 grooves is +.002/-.000
28 to 44 grooves is +.003/-.000

2 set screws at 90.
SET
SCREW
D/2
D
D/2
SET
SCREW
.40
C B
F.D. O.D.
O.D. F.D.
B C
.40
Fig. 1
INCH COMPONENT
Catalog Number
7
8
9
10
11
12
13
Fig. 1
A
A
A
A
A
A
A
A
Fig. 2
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
No.
of
P.D.
Grooves
O.D.
F.D.
1/64
B
Bore
+.001
-.000
E
W
Body Length
1/64
C
Hub
Dia.
1/64
D
Set
Hub Screw
Proj.
6A23-010DF0904
6A23-011DF0904
6A23-012DF0906
6A23-013DF0906
6A23-014DF0906
6A23-015DF0906
6A23-016DF0906
6A23-017DF0906
10
11
12
13
14
15
16
17
.376
.414
.451
.489
.526
.564
.602
.639
.346
.384
.421
.459
.496
.534
.572
.609
.505
.530
.580
.610
.635
.685
.710
.740
.125
.125
.1875
.1875
.1875
.1875
.1875
.1875
11/16
11/16
11/16
11/16
11/16
11/16
11/16
11/16
.505
.530
.580
.610
.635
.685
.710
.740
15/64
15/64
15/64
15/64
15/64
15/64
15/64
15/64
#4-40
#4-40
#6-40
#6-40
#6-40
#6-40
#6-40
#6-40
6A23-018DF0908
6A23-019DF0908
6A23-020DF0908
6A23-022DF0908
6A23-024DF0908
6A23-025DF0908
6A23-026DF0908
6A23-028DF0908
6A23-030DF0908
6A23-032DF0908
6A23-034DF0908
6A23-036DF0908
6A23-038DF0908
6A23-040DF0908
6A23-044DF0908
18
19
20
22
24
25
26
28
30
32
34
36
38
40
44
.677
.714
.752
.827
.902
.940
.977
1.053
1.128
1.203
1.278
1.353
1.429
1.504
1.654
.647
.684
.722
.797
.872
.910
.947
1.023
1.098
1.173
1.248
1.323
1.399
1.474
1.624
.790
.815
.895
.945
1.025
1.060
1.105
1.173
1.250
1.323
1.398
1.473
1.549
1.625
1.775
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
.506
.506
.506
.506
.506
.506
.506
.506
.506
.506
.527
.527
.527
.527
.527
13/16
13/16
13/16
13/16
13/16
13/16
13/16
13/16
13/16
13/16
27/32
27/32
27/32
27/32
27/32
.442
.468
.500
.562
.625
.625
.625
.701
.776
.851
.921
1.000
1.075
1.150
1.300
19/64
19/64
19/64
19/64
19/64
19/64
19/64
19/64
19/64
19/64
5/16
5/16
5/16
5/16
5/16
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
14
15
16
Fig. 2
2-124


NO FLANGE
PROFILE
R
Inch
MATERIAL:
Aluminum Alloy
FINISH:
Clear Anodized
SPECIFICATIONS:
O.D. Tolerance:
18 to 26 grooves is +.002/-.000
28 to 50 grooves is +.003/-.000
56 to 80 grooves is +.004/-.000
#8-32
SET
SCREW
D
D/2
B C
O.D.
5
INCH COMPONENT
Catalog Number
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
6A23-018NF0908
6A23-019NF0908
6A23-020NF0908
6A23-022NF0908
6A23-024NF0908
6A23-025NF0908
6A23-026NF0908
6A23-028NF0908
6A23-030NF0908
6A23-032NF0908
6A23-034NF0908
6A23-036NF0908
6A23-038NF0908
6A23-040NF0908
6A23-044NF0908
6A23-045NF0910
6A23-048NF0910
6A23-050NF0910
6A23-056NF0910
6A23-060NF0910
6A23-062NF0910
6A23-068NF0910
6A23-072NF0910
6A23-080NF0910
No.
of
Grooves
P.D.
O.D.
18
19
20
22
24
25
26
28
30
32
34
36
38
40
44
45
48
50
56
60
62
68
72
80
.677
.714
.752
.827
.902
.940
.977
1.053
1.128
1.203
1.278
1.353
1.429
1.504
1.654
1.692
1.805
1.880
2.105
2.256
2.331
2.556
2.707
3.008
.647
.684
.722
.797
.872
.910
.947
1.023
1.098
1.173
1.248
1.323
1.399
1.474
1.624
1.662
1.775
1.850
2.075
2.226
2.301
2.526
2.677
2.978
B
Bore
+.001
-.000
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
.3125
.3125
.3125
.3125
.3125
.3125
.3125
.3125
.3125
F
Face
Width
E
Length
.506
.506
.506
.506
.506
.506
.506
.506
.506
.506
.527
.527
.527
.527
.527
.500
.500
.500
.500
.500
.500
.500
.500
.500
13/16
13/16
13/16
13/16
13/16
13/16
13/16
13/16
13/16
13/16
27/32
27/32
27/32
27/32
27/32
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
1/64
C
Hub
Dia.
1/64
.442
.468
.500
.562
.625
.625
.625
.701
.776
.851
.921
1.000
1.075
1.150
1.300
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
D
Hub
Proj.
19/64
19/64
19/64
19/64
19/64
19/64
19/64
19/64
19/64
19/64
5/16
5/16
5/16
5/16
5/16
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
6
7
8
9
10
11
12
13
14
15
2-125
16

MOLDED WITH INSERT
DOUBLE FLANGE
PROFILE
R
Inch
MATERIAL:

T
1
2
13/16
1/4
1/8
F.D. O.D.
1/16
SET
SCREW
A* C
7/16
13/16
1/4
9/64
SET
SCREW
A C
F.D. O.D.
SPOT
DRILL
7/16
Fig. 1
SPOT
DRILL
Fig. 2
Fig. 1
A
A
A
A
A
A
A
Fig. 2
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
No.
of
Grooves
P.D.
O.D.
F.D.
B
Bore
6Z23-010DF0906
6Z23-011DF0906
6Z23-012DF0906
6Z23-013DF0906
6Z23-014DF0906
6Z23-015DF0906
6Z23-016DF0906
10
11
12
13
14
15
16
.376
.414
.451
.489
.526
.564
.602
.346
.384
.421
.459
.496
.534
.572
.63
.63
.63
.69
.69
.78
.82
6Z23-017DF0906
6Z23-017DF0908
6Z23-018DF0906
6Z23-018DF0908
6Z23-019DF0906
6Z23-019DF0908
6Z23-020DF0906
6Z23-020DF0908
6Z23-022DF0906
6Z23-022DF0908
6Z23-025DF0908
6Z23-025DF0910
6Z23-025DF0912
6Z23-028DF0908
6Z23-028DF0910
6Z23-028DF0912
6Z23-030DF0908
6Z23-030DF0910
6Z23-030DF0912
17
17
18
18
19
19
20
20
22
22
25
25
25
28
28
28
30
30
30
.639
.639
.677
.677
.714
.714
.752
.752
.827
.827
.940
.940
.940
1.053
1.053
1.053
1.128
1.128
1.128
.609
.609
.647
.647
.684
.684
.722
.722
.797
.797
.910
.910
.910
1.023
1.023
1.023
1.098
1.098
1.098
.87
.87
.93
.93
.93
.93
.93
.93
1.06
1.06
1.19
1.19
1.19
1.24
1.24
1.24
1.34
1.34
1.34
* 1/4 long insert in hub end only.
A
Dia.
C
Hub
Dia.
Set
Screw
.1875
.1875
.1875
.1875
.1875
.1875
.1875
7/16 *
7/16 *
7/16 *
7/16 *
7/16 *
7/16 *
7/16 *
5/8
5/8
5/8
11/16
11/16
11/16
11/16
#6-32
#6-32
#6-32
#6-32
#6-32
#6-32
#6-32
.1875
.250
.1875
.250
.1875
.250
.1875
.250
.1875
.250
.250
.3125
.375
.250
.3125
.375
.250
.3125
.375
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
11/16
11/16
11/16
11/16
11/16
11/16
11/16
11/16
11/16
11/16
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
#6-32
#6-32
#6-32
#6-32
#6-32
#6-32
#6-32
#6-32
#6-32
#6-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
+.001
-.000
2-126
REV: 04.11.12 mh
4
5
6
INCH COMPONENT
Catalog Number
7
8
9
10
11
12
13
14
15
16

MOLDED WITH INSERT
DOUBLE FLANGE
PROFILE
R
Inch
MATERIAL:

T
1
7/8
13/16
5/16
5/32
1/2
1/4
9/64
SET
SCREW
O.D. A
B C F.D.
O.D. A
SPOT DRILL
3/16
3/16
B C F.D.
Fig. 2
INCH COMPONENT
Fig. 1
A
A
A
A
A
A
A
A
A
A
A
A
Fig. 2
A
A
A
A
A
A
A
A
A
No.
of
Grooves
P.D.
O.D.
F.D.
B
Bore
6Z23-032DF0908
6Z23-032DF0910
6Z23-032DF0912
6Z23-036DF0908
6Z23-036DF0910
6Z23-036DF0912
6Z23-040DF0908
6Z23-040DF0910
6Z23-040DF0912
6Z23-048DF0908
6Z23-048DF0910
6Z23-048DF0912
32
32
32
36
36
36
40
40
40
48
48
48
1.205
1.250
1.250
1.354
1.354
1.354
1.504
1.504
1.504
1.803
1.803
1.803
1.173
1.173
1.173
1.323
1.323
1.323
1.472
1.472
1.472
1.772
1.772
1.772
1.46
1.46
1.46
1.57
1.57
1.57
1.77
1.77
1.77
2.01
2.01
2.01
6Z23-060DF0910
6Z23-060DF0912
6Z23-060DF0916
6Z23-072DF0910
6Z23-072DF0912
6Z23-072DF0916
6Z23-080DF0910
6Z23-080DF0912
6Z23-080DF0916
60
60
60
72
72
72
80
80
80
2.256
2.256
2.256
2.709
2.709
2.709
3.008
3.008
3.008
2.224
2.224
2.224
2.677
2.677
2.677
2.976
2.976
2.976
2.48
2.48
2.48
2.91
2.91
2.91
3.27
3.27
3.27
A
Dia.
C
Hub
Dia.
Set
Screw
.250
.3125
.375
.250
.3125
.375
.250
.3125
.375
.250
.3125
.375
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
3/4
3/4
3/4
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
.3125
.375
.500
.3125
.375
.500
.3125
.375
.500
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
#10-32
#10-32
#10-32
#10-32
#10-32
#10-32
#10-32
#10-32
#10-32
+.001
-.000
7/16
Fig. 1
Catalog Number
SET
SCREW
SPOT DRILL
7/16
7
8
9
10
11
12
13
14
15
2-127
REV: 04.11.12 mh
16
I
R
T

MOLDED WITH INSERT
SINGLE FLANGE
PROFILE
Inch
MATERIAL:

1
2
9
10
11
12
13
14
15
16
O.D.
A C F.D.
7/16
SPOT DRILL
Fig. 2
No.
of
Grooves
P.D.
O.D.
F.D.
B
Bore
10
11
12
13
14
.376
.414
.451
.489
.526
.346
.384
.421
.459
.496
.63
.63
.63
.69
.69
15
16
.564
.602
.534
.572
17
17
18
18
19
19
20
20
22
22
25
25
25
28
28
28
30
30
30
.639
.639
.677
.677
.714
.714
.752
.752
.827
.827
.940
.940
.940
1.053
1.053
1.053
1.128
1.128
1.128
.609
.609
.647
.647
.684
.684
.722
.722
.797
.797
.910
.910
.910
1.023
1.023
1.023
1.098
1.098
1.098
Fig. 1 Grooves Flush with End

A 6Z23-010SF0906
A 6Z23-011SF0906
A 6Z23-012SF0906
A 6Z23-013SF0906
A 6Z23-014SF0906
Fig. 1
A 6Z23-015SF0906
A 6Z23-016SF0906
Fig. 2
A 6Z23-017SF0906
A 6Z23-017SF0908
A 6Z23-018SF0906
A 6Z23-018SF0908
A 6Z23-019SF0906
A 6Z23-019SF0908
A 6Z23-020SF0906
A 6Z23-020SF0908
A 6Z23-022SF0906
A 6Z23-022SF0908
A 6Z23-025SF0908
A 6Z23-025SF0910
A 6Z23-025SF0912
A 6Z23-028SF0908
A 6Z23-028SF0910
A 6Z23-028SF0912
A 6Z23-030SF0908
A 6Z23-030SF0910
A 6Z23-030SF0912
* 1/4 long insert in hub end only.
2-128
SPOT DRILL
For Pulleys with 10 to 14 grooves;

E = 3/4, grooves flush with end.
INCH COMPONENT
Catalog Number
9/64
SET SCREW
Fig. 1
1/16
1/16
7/16
SET
SCREW
A* C F.D.
O.D.
13/16
1/4
13/16
1/4
1/8
A
Dia.
C
Hub
Dia.
Set
Screw
.1875
.1875
.1875
.1875
.1875
7/16 *
7/16 *
7/16 *
7/16 *
7/16 *
5/8
5/8
5/8
11/16
11/16
#6-32
#6-32
#6-32
#6-32
#6-32
.78
.82
.1875
.1875
7/16 *
7/16 *
11/16
11/16
#6-32
#6-32
.87
.87
.93
.93
.93
.93
.93
.93
1.06
1.06
1.19
1.19
1.19
1.24
1.24
1.24
1.34
1.34
1.34
.1875
.250
.1875
.250
.1875
.250
.1875
.250
.1875
.250
.250
.3125
.375
.250
.3125
.375
.250
.3125
.375
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
11/16
11/16
11/16
11/16
11/16
11/16
11/16
11/16
11/16
11/16
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
#6-32
#6-32
#6-32
#6-32
#6-32
#6-32
#6-32
#6-32
#6-32
#6-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
+.001
-.000

MOLDED WITH INSERT
SINGLE OR NO FLANGE
PROFILE
R
Inch
MATERIAL:

T
1
7/8
1/2
13/16
13/16
5/16
5/32
1/4
9/64
SET
SCREW
1/2
O.D. A
O.D. A
B C F.D.
SPOT
DRILL
3/16
3/16
O.D. A
B C
3
4
5
Fig. 2
INCH COMPONENT
SPOT DRILL
7/16
Fig. 1

A 6Z23-032SF0908
A 6Z23-032SF0910
A 6Z23-032SF0912
A 6Z23-036SF0908
A 6Z23-036SF0910
A 6Z23-036SF0912
A 6Z23-040SF0908
A 6Z23-040SF0910
A 6Z23-040SF0912
A 6Z23-048SF0908
A 6Z23-048SF0910
A 6Z23-048SF0912
A 6Z23-060SF0910
A 6Z23-060SF0912
A 6Z23-060SF0916
A 6Z23-072SF0910
A 6Z23-072SF0912
A 6Z23-072SF0916
A 6Z23-080SF0910
A 6Z23-080SF0912
A 6Z23-080SF0916
A 6Z23-084SF0910
A 6Z23-084SF0912
A 6Z23-084SF0916
A 6Z23-096SF0910
A 6Z23-096SF0912
A 6Z23-096SF0916
Fig. 3 No Flange
A 6Z23-120NF0912
A 6Z23-120NF0916
SET
SCREW
SPOT
DRILL
7/16
Catalog Number
3/16
SET
SCREW
B C F.D.
3/8
3/16
Fig. 3
No.
of
Grooves
P.D.
O.D.
F.D.
B
Bore
32
32
32
36
36
36
40
40
40
48
48
48
1.203
1.203
1.203
1.353
1.353
1.353
1.504
1.504
1.504
1.805
1.805
1.805
1.173
1.173
1.173
1.323
1.323
1.323
1.474
1.474
1.474
1.775
1.775
1.775
1.44
1.44
1.44
1.57
1.57
1.57
1.76
1.76
1.76
2.02
2.02
2.02
60
60
60
72
72
72
80
80
80
84
84
84
96
96
96
2.256
2.256
2.256
2.707
2.707
2.707
3.008
3.008
3.008
3.158
3.158
3.158
3.609
3.609
3.609
2.226
2.226
2.226
2.677
2.677
2.677
2.978
2.978
2.978
3.128
3.128
3.128
3.579
3.579
3.579
120
120
4.511
4.511
4.481
4.481
A
Dia.
C
Hub
Dia.
Set
Screw
.250
.3125
.375
.250
.3125
.375
.250
.3125
.375
.250
.3125
.375
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
3/4
3/4
3/4
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
2.46
2.46
2.46
2.92
2.92
2.92
3.29
3.29
3.29
3.38
3.38
3.38
3.83
3.83
3.83
.3125
.375
.500
.3125
.375
.500
.3125
.375
.500
.3125
.375
.500
.3125
.375
.500
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
1
1
1
#10-32
#10-32
#10-32
#10-32
#10-32
#10-32
#10-32
#10-32
#10-32
#10-32
#10-32
#10-32
#10-32
#10-32
#10-32
.375
.500
5/8
5/8
1
1
#10-32
#10-32
+.001
-.000
6
7
8
9
10
11
12
13
14
15
2-129
16
I
R


MOLDED
DOUBLE FLANGE
PROFILE
MATERIAL:
SPECIFICATION:
Inch

do not have webs.
2
3
13/16
1/4
C F.D.
O.D.
B
O.D.
8
9
10
11
12
13
14
O.D.
C F.D.
B
3/16
Fig. 2
7/16
Fig. 3
INCH COMPONENT
Catalog Number
Fig. 1
A 6L23-010DF0906
A 6L23-011DF0906
A 6L23-012DF0906
A 6L23-013DF0906
A 6L23-014DF0906
A 6L23-015DF0906
A 6L23-016DF0906
Fig. 2 Solid
A 6L23-017DF0906
A 6L23-018DF0906
A 6L23-019DF0906
A 6L23-020DF0906
A 6L23-022DF0906
A 6L23-025DF0908
A 6L23-028DF0908
A 6L23-030DF0908
Fig. 2
A 6L23-032DF0908
A 6L23-036DF0908
A 6L23-040DF0908
A 6L23-048DF0908
Fig. 3
A 6L23-060DF0910
A 6L23-072DF0910
A 6L23-080DF0910
15
16
C F.D.
7/16
Fig. 1
5/16
1/4
7/16
5
6
7/8
13/16
2-130
No.
of
Grooves
P.D.
O.D.
F.D.
B
Bore
+.001
-.000
C
Hub
Dia.
10
11
12
13
14
15
16
.376
.414
.451
.489
.526
.564
.602
.346
.384
.421
.459
.496
.534
.572
.63
.63
.63
.69
.69
.78
.82
.1875
.1875
.1875
.1875
.1875
.1875
.1875
5/8
5/8
5/8
11/16
11/16
11/16
11/16
17
18
19
20
22
25
28
30
.639
.677
.714
.752
.827
.940
1.053
1.128
.609
.647
.684
.722
.797
.910
1.023
1.098
.87
.93
.93
.93
1.06
1.19
1.24
1.34
.1875
.1875
.1875
.1875
.1875
.250
.250
.250
11/16
11/16
11/16
11/16
11/16
3/4
3/4
3/4
32
36
40
48
1.203
1.353
1.504
1.805
1.173
1.323
1.474
1.775
1.44
1.57
1.76
2.02
.250
.250
.250
.250
3/4
7/8
7/8
7/8
60
72
80
2.256
2.707
3.008
2.226
2.677
2.978
2.46
2.92
3.29
.3125
.3125
.3125
7/8
7/8
7/8


MOLDED
SINGLE OR NO FLANGE
PROFILE
R
Inch
MATERIAL:
SPECIFICATION:
T
1

do not have webs.
2
E
E
B
E
D
1/2
7/16
O.D.
Fig. 1
O.D.
C F.D.
3/16
1/16
C F.D.
O.D.
1/2
7/16
C F.D.
3/16
Fig. 2
7/16
B C
O.D.
3/16
Fig. 3
Fig. 4
INCH COMPONENT
Catalog Number
No.
of
Grooves
P.D.
Fig. 1 Single Flange Grooves Flush with End

10
.376
A 6L23-010SF0906
11
.414
A 6L23-011SF0906
12
.451
A 6L23-012SF0906
13
.489
A 6L23-013SF0906
14
.526
A 6L23-014SF0906
15
.564
A 6L23-015SF0906
16
.602
A 6L23-016SF0906
Fig. 2 Single Flange Solid
17
.639
A 6L23-017SF0906
18
.677
A 6L23-018SF0906
19
.714
A 6L23-019SF0906
20
.752
A 6L23-020SF0906
22
.827
A 6L23-022SF0906
25
.940
A 6L23-025SF0908
28
1.053
A 6L23-028SF0908
30
1.128
A 6L23-030SF0908
32
1.203
A 6L23-032SF0908
36
1.353
A 6L23-036SF0908
40
1.504
A 6L23-040SF0908
48
1.805
A 6L23-048SF0908
60
2.256
A 6L23-060SF0910
72
2.707
A 6L23-072SF0910
80
3.008
A 6L23-080SF0910
84
3.158
A 6L23-084SF0910
96
3.609
A 6L23-096SF0910
Fig. 4 No Flange
120
4.511
A 6L23-120NF0912
O.D.
F.D.
B
Bore
.346
.384
.421
.459
.496
.63
.63
.63
.69
.69
.534
.572
E
Length
C
Hub
Dia.
D
Hub
Proj.
.1875
.1875
.1875
.1875
.1875
3/4
3/4
3/4
3/4
3/4
5/8
5/8
5/8
11/16
11/16
1/4
1/4
1/4
1/4
1/4
.78
.82
.1875
.1875
13/16
13/16
11/16
11/16
1/4
1/4
.609
.647
.684
.722
.797
.910
1.023
1.098
.87
.93
.93
.93
1.06
1.19
1.24
1.34
.1875
.1875
.1875
.1875
.1875
.250
.250
.250
13/16
13/16
13/16
13/16
13/16
13/16
13/16
13/16
11/16
11/16
11/16
11/16
11/16
3/4
3/4
3/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1.173
1.323
1.474
1.775
1.44
1.57
1.76
2.02
.250
.250
.250
.250
13/16
13/16
13/16
13/16
3/4
7/8
7/8
7/8
1/4
1/4
1/4
1/4
2.226
2.677
2.978
3.128
3.579
2.46
2.92
3.29
3.38
3.83
.3125
.3125
.3125
.3125
.3125
13/16
13/16
13/16
13/16
7/8
7/8
7/8
7/8
7/8
1
5/16
5/16
5/16
5/16
3/8
4.481
.375
7/8
3/8
+.001
-.000
2-131
7
8
9
10
11
12
13
14
15
16
I
R
T
1
2
3
4
5
6
7
8
9
10
11
12
13
SHAFTLOC
PATENTED
TWO-PIECE FASTENING DEVICE
A SUPERIOR WAY TO FASTEN ROTATING COMPONENTS:

Excelling because of its simplicity, it contains all structural features in only two parts.
This new development is the Shaftloc - a patented device (United States Patent
No. 5,067,846), - manufactured and marketed exclusively by Stock Drive Products.
SHAFTLOC HAS ONLY TWO PARTS:
A slotted outer sleeve and a slotted inner sleeve,
both of which have hexagonal heads. The outer
sleeve is cylindrical on its outside diameter, and
threaded on its inside diameter. Conversely, the
inner sleeve is threaded on its outside diameter,
and cylindrical on its inside diameter. The thread
is unique in that it is not symmetrical and that it
creates a continuous inclined surface.
HOW SHAFTLOC WORKS:
The shallow angle of the thread produces
large amplifications of forces, resulting in
substantial torque transmission capability
between the component and the shaft.
Inch
Style 1
A 7Z37- series
Double-Ended
INNER SLEEVE
OUTER SLEEVE
Style 2
A 7Z39M - series
Single-Ended
Style 1:
Double-Ended, when the two sleeves are threaded
into each other with a component placed between
them, tightening the sleeves will cause the outer
one to expand and the inner one to contract.
Style 2:
Single-Ended, when the two sleeves are threaded into
each other and slipped into the component, tightening the
sleeves will cause the outer one to expand and the inner
one to contract.
Style 1
Double-Ended
INNER & OUTER
SLEEVES
ASSEMBLED
SHAFT
COMPONENT
Style 2
DISTINCT ADVANTAGES OF SHAFTLOC
Single-Ended
OVER OTHER FASTENING DEVICES:
Ability to be used for stationary breadboard or production structures
Simplicity of design - few parts
Easy repositioning or synchronizing of rotating components
Ease of assembly
Applicability to small shaft diameters
Availability in all stainless construction
No marring of shafts
Low cost
These products are shown on pages 4-5 thru 4-8 in

this catalog and 4-4 thru 4-6 in Catalog 805, Metric Drive
Components. Please contact our Engineering Department
for sizes not shown in this catalog.
14
15
16
DID YOU KNOW?

That you can see a video showing how the Shaftloc rotating component fastener works and
how it can benefit your application. It is located at: www.sdp-si.com/shaftloc
2-132
SHAFTLOC HTD PULLEYS 3 mm PITCH


PATENTED
R
Inch
MATERIAL:
Pulley - Black Nylon, Fiberglass Reinforced

9/16
.53
3/4
F.D.
2
.625 +.002
-.000
.625 +.002
-.000
O.D.
.53
13/32
29/64
Fig. 1
INCH COMPONENT
Catalog Number
Single Flange
Fig. 1
A
A
A
A
A
A
A
A
6T23-H32SF0920
6T23-H36SF0920
6T23-H40SF0920
6T23-H42SF0920
6T23-H48SF0920
6T23-H50SF0920
6T23-H60SF0920
6T23-H72SF0920
Double Flange
Fig. 2
A
A
A
A
A
A
Fig. 2
No.
of
Grooves
P.D.
O.D.
F.D.
30
32
36
40
42
48
50
60
72
1.128
1.203
1.353
1.504
1.579
1.805
1.880
2.256
2.707
1.098
1.173
1.323
1.474
1.549
1.775
1.850
2.226
2.677
1.25
1.32
1.47
1.62
1.70
1.92
2.00
2.37
2.83
6T23-H30DF0920
6T23-H32DF0920
6T23-H36DF0920
6T23-H40DF0920
6T23-H42DF0920
6T23-H48DF0920
4
5
6
7
The Shaftloc shown below may be used to secure these pulleys on the shaft.

(For Shaftloc Introduction and use, see preceding page)
MATERIAL:
10
416 Stainless Steel
SPECIFICATION:
A 3/4 O.D. x 5/8 I.D. x .05 thick washer,
11
1/4
7/32
12
BORE
PULLEY
BORE
(REF.)
1/4
13
3/4
HEX
INCH COMPONENT
Catalog Number
Pulley
Bore
(Ref.)
Max. Torque
Capacity*
A 7Z37-030553
.625
250
lbf in.
14
* Based on mating components being degreased
before assembly with Shaftloc coupling.
2-133
15
16
I
R
T

BELT WIDTHS
METRIC - 6, 9, 15 & 25 mm
PROFILE
Metric
Inch
MATERIAL:
101
SPECIFICATIONS:
1
2
3
4
Breaking Strength:
Working Tension:
Temperature Range:
-34C to +85C (-30F to +185F)
5
(.197)
MODIFICATIONS:

2.08
(.082)
3.81
(.150)

or inch standards.
5
6
7
METRIC COMPONENT
CATALOG NUMBER
A 6R25M
No. of
Grooves
Code
8
9
Belt Width
mm
6 (.236)
9 (.354)
15 (.591)
25 (.984)
10
11
12
13
14
024
035
036
038
040
043
045
046
048
049
051
052
053
054
055
056
057
059
060
061
062
064
065
066
067
068
Pitch Length
mm
Inch
Groove
Code
120
175
180
190
200
215
225
230
240
245
255
260
265
270
275
280
285
295
300
305
310
320
325
330
335
340
4.724
6.890
7.087
7.480
7.874
8.465
8.858
9.055
9.449
9.646
10.039
10.236
10.433
10.630
10.827
11.024
11.220
11.614
11.811
12.008
12.205
12.598
12.795
12.992
13.189
13.386
069
070
072
073
074
075
077
080
081
082
083
084
085
090
092
093
095
096
099
100
104
105
107
110
111
112
Pitch Length
mm
Inch
345
350
360
365
370
375
385
400
405
410
415
420
425
450
460
465
475
480
495
500
520
525
535
550
555
560
13.583
13.780
14.173
14.370
14.567
14.764
15.157
15.748
15.945
16.142
16.339
16.535
16.732
17.717
18.110
18.307
18.701
18.898
19.488
19.685
20.472
20.669
21.063
21.654
21.850
22.047
15
16
Width
Code
060
090
150
250
Groove
Code
2-134

Metric
Inch
METRIC COMPONENT
CATALOG NUMBER
A 6R25M
No. of
Grooves
Code
Belt Width
mm
6 (.236)
9 (.354)
15 (.591)
25 (.984)
Width
Code
060
090
150
250
0
Groove
Code
113
115
116
117
118
120
122
123
124
125
127
128
129
131
133
134
136
137
139
140
142
144
148
149
150
151
153
154
155
158
160
162
165
166
167
169
170
172
174
178
180
184
185
186
187
188
190
193
195
196
Pitch Length
mm
Inch
565
575
580
585
590
600
610
615
620
625
635
640
645
655
665
670
680
685
695
700
710
720
740
745
750
755
765
770
775
790
800
810
825
830
835
845
850
860
870
890
900
920
925
930
935
940
950
965
975
980
22.244
22.638
22.835
23.031
23.228
23.622
24.016
24.213
24.409
24.606
25.000
25.197
25.394
25.787
26.181
26.378
26.772
26.968
27.362
27.559
27.953
28.346
29.134
29.331
29.528
29.724
30.118
30.315
30.512
31.102
31.496
31.890
32.480
32.677
32.874
33.268
33.465
33.858
34.252
35.039
35.433
36.220
36.417
36.614
36.811
37.008
37.402
37.992
38.386
38.583
Groove
Code
197
200
205
207
208
210
220
223
225
227
229
235
239
240
245
247
250
254
259
270
275
276
284
300
304
315
319
327
338
344
358
360
374
379
389
396
400
420
422
450
470
505
552
624
634
640
686
760
800
101
Pitch Length
mm
Inch
985
1000
1025
1035
1040
1050
1100
1115
1125
1135
1145
1175
1195
1200
1225
1235
1250
1270
1295
1350
1375
1380
1420
1500
1520
1575
1595
1635
1690
1720
1790
1800
1870
1895
1945
1980
2000
2100
2110
2250
2350
2525
2760
3120
3170
3200
3430
3800
4000
38.779
39.370
40.354
40.748
40.945
41.339
43.307
43.898
44.291
44.685
45.079
46.260
47.047
47.244
48.228
48.622
49.213
50.000
50.984
53.150
54.134
54.331
55.905
59.055
59.843
62.008
62.795
64.370
66.535
67.716
70.472
70.866
73.622
74.606
76.575
77.953
78.740
82.677
83.071
88.583
92.520
99.409
108.661
122.834
124.803
125.984
135.039
149.606
157.480
R
T
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
2-135
16
I
R
T

BELT WIDTHS
METRIC - 6, 9, 15 & 25 mm
PROFILE
Metric
Inch
MATERIAL:
101
SPECIFICATIONS:
1
2
3
4
Breaking Strength:
Working Tension:
Temperature Range:
-34C to +85C (-30F to +185F)
5
(.197)
MODIFICATIONS:

2.08
(.082)
5.3
(.209)

or inch standards.
5
6
7
METRIC COMPONENT
CATALOG NUMBER
A 6R25MD
No. of
Grooves
Code
Belt Width
mm
6 (.236)
9 (.354)
15 (.591)
25 (.984)
9
10
11
12
13
14
080
083
085
090
092
095
096
099
100
104
107
111
112
113
115
116
117
118
120
122
123
127
128
131
133
134
Pitch Length
mm
Inch
Groove
Code
400
415
425
450
460
475
480
495
500
520
535
555
560
565
575
580
585
590
600
610
615
635
640
655
665
670
15.748
16.339
16.732
17.717
18.110
18.701
18.898
19.488
19.685
20.472
21.063
21.850
22.047
22.244
22.638
22.835
23.031
23.228
23.622
24.016
24.213
25.000
25.197
25.787
26.181
26.378
136
137
139
140
142
148
149
151
153
155
158
160
166
167
170
174
178
185
186
187
190
195
197
200
207
210
Pitch Length
mm
Inch
680
685
695
700
710
740
745
755
765
775
790
800
830
835
850
870
890
925
930
935
950
975
985
1000
1035
1050
26.772
26.968
27.362
27.559
27.953
29.134
29.331
29.724
30.118
30.512
31.102
31.496
32.677
32.874
33.465
34.252
35.039
36.417
36.614
36.811
37.402
38.386
38.779
39.370
40.748
41.339
15
16
Width
Code
060
090
150
250
Groove
Code
2-136

Metric
Inch
101
R
T
1
METRIC COMPONENT
CATALOG NUMBER
A 6R25MD
No. of
Grooves
Code
Belt Width
mm
6 (.236)
9 (.354)
15 (.591)
25 (.984)
Width
Code
060
090
150
250
Groove
Code
220
225
239
240
245
250
254
259
275
284
300
315
319
327
338
358
360
374
379
389
396
400
420
422
450
470
505
552
624
Pitch Length
mm
Inch
1100
1125
1195
1200
1225
1250
1270
1295
1375
1420
1500
1575
1595
1635
1690
1790
1800
1870
1895
1945
1980
2000
2100
2110
2250
2350
2525
2760
3120
43.307
44.291
47.047
47.244
48.228
49.213
50.000
50.984
54.134
55.905
59.055
62.008
62.795
64.370
66.535
70.472
70.866
73.622
74.606
76.575
77.953
78.740
82.677
83.071
88.583
92.520
99.409
108.661
122.834
2
3
4
5
6
7
8
9
10
11
12
13
14
15
2-137
16
HTD PULLEY FLANGES 5 mm PITCH

FOR
PROFILE
MATERIAL:
Metric
Inch
SPECIFICATION:
101
1
2
1.65 0.25
(.065 .010)
d
1.02
(.040)
4
METRIC COMPONENT
Catalog Number
Aluminum
Alloy
6
7
8
9
10
11
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
6A24M012FA
6A24M013FA
6A24M014FA
6A24M015FA
6A24M016FA
6A24M017FA
6A24M018FA
6A24M019FA
6A24M020FA
6A24M021FA
6A24M022FA
6A24M023FA
6A24M024FA
6A24M025FA
6A24M026FA
6A24M028FA
6A24M030FA
6A24M032FA
6A24M034FA
Steel
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
6C24M012FS
6C24M013FS
6C24M014FS
6C24M015FS
6C24M016FS
6C24M017FS
6C24M018FS
6C24M019FS
6C24M020FS
6C24M021FS
6C24M022FS
6C24M023FS
6C24M024FS
6C24M025FS
6C24M026FS
6C24M028FS
6C24M030FS
6C24M032FS
6C24M034FS
12
13
14
15
16
2-138
Pulley
Grooves
(Ref.)
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
28
30
32
34
Metric
d
Dia.
0.08
12.78
14.27
14.27
15.88
17.37
19
20.58
22.53
23.77
25.4
26.97
28.58
29.46
31.04
31.04
34.21
36.2
39.37
42.55
Inch
D
Dia.
0.4
22.2
23.8
25.4
27
27.8
30.2
31.8
33.3
34.9
36.5
38.1
39.7
41.3
42.9
44.5
47.6
50.8
54
57.2
d
Dia.
.003
.503
.562
.562
.625
.684
.748
.810
.887
.936
1.000
1.062
1.125
1.160
1.222
1.222
1.347
1.425
1.550
1.675
D
Dia.
1/64
7/8
15/16
1
1-1/16
1-3/32
1-3/16
1-1/4
1-5/16
1-3/8
1-7/16
1-1/2
1-9/16
1-5/8
1-11/16
1-3/4
1-7/8
2
2-1/8
2-1/4

PROFILE
MATERIAL:
Metric
Inch
Aluminum Alloy
SPECIFICATIONS:
101
D Tolerance:
12 to 16 grooves is +0.05/0 (+.002/-.000)
17 to 30 grooves is +0.08/0 (+.003/-.000)
R
T
1
L1
3
D D1
4
METRIC COMPONENT
Catalog Number
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
6A24M012TM15
6A24M013TM15
6A24M014TM18
6A24M015TM18
6A24M016TM18
6A24M017TM18
6A24M018TM20
6A24M019TM20
6A24M020TM20
6A24M021TM20
6A24M022TM20
6A24M023TM20
6A24M024TM20
6A24M025TM20
6A24M026TM20
6A24M027TM20
6A24M028TM20
6A24M029TM20
6A24M030TM20
Metric
Inch
No.
of
Grooves
P.D.
D
Dia.
P.D.
D
Dia.
D1
Shank
Dia.
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
19.1
20.7
22.3
23.9
25.5
27.1
28.6
30.2
31.8
33.4
35
36.6
38.2
39.8
41.4
43
44.6
46.2
47.7
17.96
19.55
21.14
22.73
24.32
25.91
27.5
29.1
30.69
32.28
33.87
35.46
37.05
38.65
40.24
41.83
43.42
45.01
46.6
.752
.815
.877
.940
1.003
1.065
1.128
1.191
1.253
1.316
1.379
1.441
1.504
1.566
1.629
1.692
1.754
1.817
1.880
.707
.770
.832
.895
.958
1.020
1.083
1.146
1.208
1.271
1.334
1.396
1.459
1.521
1.584
1.647
1.709
1.772
1.835
12.7 (1/2)
12.7 (1/2)
12.7 (1/2)
12.7 (1/2)
12.7 (1/2)
12.7 (1/2)
12.7 (1/2)
12.7 (1/2)
12.7 (1/2)
12.7 (1/2)
12.7 (1/2)
12.7 (1/2)
12.7 (1/2)
12.7 (1/2)
12.7 (1/2)
12.7 (1/2)
12.7 (1/2)
12.7 (1/2)
12.7 (1/2)

L1
Shank
Length
(Ref.)
L
Min.
Usable
Length
22 (7/8)
22 (7/8)
150 (6)
150 (6)
175 (7)
175 (7)
175 (7)
175 (7)
200 (8)
200 (8)
200 (8)
200 (8)
200 (8)
200 (8)
200 (8)
200 (8)
200 (8)
200 (8)
200 (8)
200 (8)
200 (8)
25
(1)
19
[ (3/4)
]
5
6
7
8
9
10
11
12
13
14
15
2-139
16

PROFILE
MATERIAL:
Metric
Inch
Aluminum Alloy
T
1
D Tolerance:
31 to 32 grooves is
33 to 62 grooves is
65 to 112 grooves is
126 grooves is
+0.08/0 (+.003/-.000)
+0.10/0 (+.004/-.000)
+0.13/0 (+.005/-.000)
+0.15/0 (+.006/-.000)
L1
2
3
4
5
6
7
8
9
10
11
101
D D1
METRIC COMPONENT
Catalog Number
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
6A24M031TM20
6A24M032TM20
6A24M033TM20
6A24M034TM20
6A24M035TM20
6A24M036TM20
6A24M038TM20
6A24M040TM20
6A24M042TM20
6A24M044TM20
6A24M045TM20
6A24M046TM20
6A24M048TM20
6A24M050TM20
6A24M054TM20
6A24M056TM20
6A24M060TM20
6A24M062TM20
6A24M065TM20
6A24M072TM20
6A24M080TM20
6A24M090TM20
6A24M100TM20
6A24M112TM15
6A24M126TM15
Metric
13
14
15
2-140
Inch
No.
of
Grooves
P.D.
D
Dia.
P.D.
D
Dia.
D1
Shank
Dia.
31
32
33
34
35
36
38
40
42
44
45
46
48
50
54
56
60
62
65
72
80
90
100
112
126
49.3
50.9
52.5
54.1
55.7
57.3
60.5
63.7
66.8
70
71.6
73.2
76.4
79.6
85.9
89.1
95.5
98.7
103.5
114.6
127.3
143.2
159.2
178.3
200.5
48.2
49.79
51.38
52.97
54.56
56.15
59.34
62.52
65.7
68.89
70.48
72.07
75.25
78.43
84.8
87.98
94.35
97.53
102.31
113.45
126.18
142.1
158.01
177.11
199.39
1.942
2.005
2.068
2.130
2.193
2.256
2.381
2.506
2.632
2.757
2.820
2.882
3.008
3.133
3.384
3.509
3.760
3.885
4.073
4.511
5.013
5.639
6.266
7.018
7.895
1.897
1.960
2.023
2.085
2.148
2.211
2.336
2.461
2.587
2.712
2.775
2.837
2.963
3.088
3.339
3.464
3.715
3.840
4.028
4.466
4.968
5.594
6.221
6.973
7.850
19.1 (3/4)
19.1 (3/4)
19.1 (3/4)
19.1 (3/4)
19.1 (3/4)
19.1 (3/4)
19.1 (3/4)
19.1 (3/4)
19.1 (3/4)
19.1 (3/4)
19.1 (3/4)
19.1 (3/4)
19.1 (3/4)
19.1 (3/4)
19.1 (3/4)
19.1 (3/4)
19.1 (3/4)
19.1 (3/4)
25.4 (1)
25.4 (1)
25.4 (1)
25.4 (1)
25.4 (1)
25.4 (1)
25.4 (1)

12
16
SPECIFICATION:
L
Min.
Usable
Length
L1
Shank
Length
(Ref.)
25
(1)
19
[ (3/4)
]
25 (1)
25 (1)
25 (1)
25 (1)
25 (1)
25 (1)
25 (1)
200 (8)
200 (8)
200 (8)
200 (8)
200 (8)
200 (8)
200 (8)
200 (8)
200 (8)
200 (8)
200 (8)
200 (8)
200 (8)
200 (8)
200 (8)
200 (8)
200 (8)
200 (8)
200 (8)
200 (8)
200 (8)
200 (8)
200 (8)
150 (6)
150 (6)

PROFILE
MATERIAL:
Metric
Inch
Carbon Steel
SPECIFICATIONS:
101
D Tolerance:
12 to 16 grooves is +0.05/0 (+.002/-.000)
17 to 30 grooves is +0.08/0 (+.003/-.000)
L1
2
3
METRIC COMPONENT
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
6C24M012TM15
6C24M013TM15
6C24M014TM18
6C24M015TM18
6C24M016TM18
6C24M017TM18
6C24M018TM20
6C24M019TM20
6C24M020TM20
6C24M021TM20
6C24M022TM20
6C24M023TM20
6C24M024TM20
6C24M025TM20
6C24M026TM20
6C24M027TM20
6C24M028TM20
6C24M029TM20
6C24M030TM20
T
1
D D1
Catalog Number
Metric
Inch
No.
of
Grooves
P.D.
D
Dia.
P.D.
D
Dia.
D1
Shank
Dia.
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
19.1
20.7
22.3
23.9
25.5
27.1
28.6
30.2
31.8
33.4
35
36.6
38.2
39.8
41.4
43
44.6
46.2
47.7
17.96
19.55
21.14
22.73
24.32
25.91
27.5
29.1
30.69
32.28
33.87
35.46
37.05
38.65
40.24
41.83
43.42
45.01
46.6
.752
.815
.877
.940
1.003
1.065
1.128
1.191
1.253
1.316
1.379
1.441
1.504
1.566
1.629
1.692
1.754
1.817
1.880
.707
.770
.832
.895
.958
1.020
1.083
1.146
1.208
1.271
1.334
1.396
1.459
1.521
1.584
1.647
1.709
1.772
1.835
12.7 (1/2)
12.7 (1/2)
12.7 (1/2)
12.7 (1/2)
12.7 (1/2)
12.7 (1/2)
12.7 (1/2)
12.7 (1/2)
12.7 (1/2)
12.7 (1/2)
12.7 (1/2)
12.7 (1/2)
12.7 (1/2)
12.7 (1/2)
12.7 (1/2)
12.7 (1/2)
12.7 (1/2)
12.7 (1/2)
12.7 (1/2)

L1
Shank
Length
(Ref.)
L
Min.
Usable
Length
22 (7/8)
22 (7/8)
150 (6)
150 (6)
175 (7)
175 (7)
175 (7)
175 (7)
200 (8)
200 (8)
200 (8)
200 (8)
200 (8)
200 (8)
200 (8)
200 (8)
200 (8)
200 (8)
200 (8)
200 (8)
200 (8)
25
(1)
19
[ (3/4)
]
4
5
6
7
8
9
10
11
12
13
14
15
2-141
16

PROFILE
MATERIAL:
Metric
Inch
Carbon Steel
T
1
D Tolerance:
31 & 32 grooves is
33 to 62 grooves is
126 grooves is
+0.08/0 (+.003/-.000)
+0.10/0 (+.004/-.000)
+0.13/0 (+.005/-.000)
+0.15/0 (+.006/-.000)
L1
2
3
4
5
6
7
8
9
10
11
101
D D1
METRIC COMPONENT
Catalog Number
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
6C24M031TM20
6C24M032TM20
6C24M033TM20
6C24M034TM20
6C24M035TM20
6C24M036TM20
6C24M038TM20
6C24M040TM20
6C24M042TM20
6C24M044TM20
6C24M045TM20
6C24M046TM20
6C24M048TM20
6C24M050TM20
6C24M054TM20
6C24M056TM20
6C24M060TM20
6C24M062TM20
6C24M065TM20
6C24M072TM20
6C24M080TM20
6C24M090TM20
6C24M100TM20
6C24M112TM15
6C24M126TM15
Metric
13
14
15
2-142
Inch
No.
of
Grooves
P.D.
D
Dia.
P.D.
D
Dia.
31
32
33
34
35
36
38
40
42
44
45
46
48
50
54
56
60
62
65
72
80
90
100
112
126
49.3
50.9
52.5
54.1
55.7
57.3
60.5
63.7
66.8
70
71.6
73.2
76.4
79.6
85.9
89.1
95.5
98.7
103.5
114.6
127.3
143.2
159.2
178.3
200.5
48.2
49.79
51.38
52.97
54.56
56.15
59.34
62.52
65.7
68.89
70.48
72.07
75.25
78.43
84.8
87.98
94.35
97.53
102.31
113.45
126.18
142.1
158.01
177.11
199.39
1.942
2.005
2.068
2.130
2.193
2.256
2.381
2.506
2.632
2.757
2.820
2.882
3.008
3.133
3.384
3.509
3.760
3.885
4.073
4.511
5.013
5.639
6.266
7.018
7.895
1.897
1.960
2.023
2.085
2.148
2.211
2.336
2.461
2.587
2.712
2.775
2.837
2.963
3.088
3.339
3.464
3.715
3.840
4.028
4.466
4.968
5.594
6.221
6.973
7.850

12
16
SPECIFICATIONS:
L1
Shank
Length
(Ref.)
D1
Shank
Dia.
19.1 (3/4)
19.1 (3/4)
19.1 (3/4)
19.1 (3/4)
19.1 (3/4)
19.1 (3/4)
19.1 (3/4)
19.1 (3/4)
19.1 (3/4)
19.1 (3/4)
19.1 (3/4)
19.1 (3/4)
25
(1)
18.2
[(23/32)
]
25.4
(1)
19.1
[ (3/4)
]
25.4 (1)
25.4 (1)
25.4 (1)
25.4 (1)
25.4 (1)
25.4 (1)
25.4 (1)
25 (1)
25 (1)
25 (1)
25 (1)
25 (1)
25 (1)
25 (1)
L
Min.
Usable
Length
200 (8)
200 (8)
200 (8)
200 (8)
200 (8)
200 (8)
200 (8)
200 (8)
200 (8)
200 (8)
200 (8)
200 (8)
200 (8)
200 (8)
200 (8)
200 (8)
200 (8)
200 (8)
200 (8)
200 (8)
200 (8)
200 (8)
200 (8)
150 (6)
150 (6)

.250 BORE
DOUBLE FLANGE
PROFILE
R
Inch
MATERIAL:
Aluminum Alloy
FINISH:
T
1
Clear Anodized
SPECIFICATIONS:
O.D. Tolerance:
12 to 16 grooves is +.002/-.000
17 to 32 grooves is +.003/-.000
34 grooves is +.004/-.000
E
D
35/64
D/2
Pulleys with 12 and 13 grooves

2 set screws at 90.
#8-32
SET SCREW
F.D. O.D.
C
+.001
.250 -.000
.42
INCH COMPONENT
Catalog Number
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
6A25-012DF0908
6A25-013DF0908
6A25-014DF0908
6A25-015DF0908
6A25-016DF0908
6A25-017DF0908
6A25-018DF0908
6A25-019DF0908
6A25-020DF0908
6A25-022DF0908
6A25-024DF0908
6A25-025DF0908
6A25-026DF0908
6A25-028DF0908
6A25-030DF0908
6A25-032DF0908
6A25-034DF0908
No.
of
Grooves
P.D.
O.D.
12
13
14
15
16
17
18
19
20
22
24
25
26
28
30
32
34
.752
.815
.877
.940
1.003
1.065
1.128
1.191
1.253
1.379
1.504
1.566
1.629
1.754
1.880
2.005
2.130
.707
.770
.832
.895
.958
1.020
1.083
1.146
1.208
1.334
1.459
1.521
1.584
1.709
1.835
1.960
2.085
F.D.
1/64
7/8
15/16
1
1-1/16
1-3/32
1-3/16
1-1/4
1-5/16
1-3/8
1-1/2
1-5/8
1-11/16
1-3/4
1-7/8
2
2-1/8
2-1/4
E
Length
1/64
51/64
51/64
51/64
51/64
51/64
51/64
51/64
51/64
51/64
51/64
5/16
5/16
5/16
5/16
5/16
5/16
5/16
C
Hub
Dia.
1/64
7/16
1/2
1/2
9/16
9/16
5/8
11/16
3/4
13/16
15/16
1
1
1-1/16
1-3/16
1-3/16
1-1/4
1-3/8
D
Hub
Proj.
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
5/16
5/16
5/16
5/16
5/16
5/16
5/16
7
8
9
10
11
12
13
14
15
2-143
16
I
R
T


NO FLANGE
PROFILE
Inch
MATERIAL:
Aluminum Alloy
FINISH:
Clear Anodized
SPECIFICATIONS:
2
3
4
O.D. Tolerance:
12 to 16 grooves is
17 to 32 grooves is
34 to 62 grooves is
70 & 72 grooves is
+.002/-.000
+.003/-.000
+.004/-.000
+.005/-.000
E
35/64
E
35/64
D/2
D
D/2

2 set screws at 90.
O.D.
D
SET
SCREW
SET SCREW
B C
O.D.
B C
5
6
7
8
9
10
11
12
13
14
15
16
Fig. 1
INCH COMPONENT
No.
of
Grooves
P.D.
6A25-012NF0908
6A25-013NF0908
6A25-014NF0908
6A25-015NF0908
6A25-016NF0908
6A25-017NF0908
6A25-018NF0908
6A25-019NF0908
6A25-020NF0908
6A25-022NF0908
6A25-024NF0908
6A25-025NF0908
6A25-026NF0908
6A25-028NF0908
6A25-030NF0908
6A25-032NF0908
6A25-034NF0908
6A25-036NF0910
6A25-038NF0910
6A25-040NF0910
12
13
14
15
16
17
18
19
20
22
24
25
26
28
30
32
34
36
38
40
.752
.815
.877
.940
1.003
1.065
1.128
1.191
1.253
1.379
1.504
1.566
1.629
1.754
1.880
2.005
2.130
2.256
2.381
2.506
.707
.770
.832
.895
.958
1.020
1.083
1.146
1.208
1.334
1.459
1.521
1.584
1.709
1.835
1.960
2.085
2.211
2.336
2.461
6A25-044NF0910
6A25-048NF0912
6A25-050NF0912
6A25-056NF0912
6A25-060NF0912
6A25-062NF0912
6A25-070NF0912
6A25-072NF0912
44
48
50
56
60
62
70
72
2.757
3.008
3.133
3.509
3.760
3.885
4.386
4.511
2.712
2.963
3.088
3.464
3.715
3.840
4.341
4.466
Catalog Number
Fig. 1
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
Fig. 2
A
A
A
A
A
A
A
A
2-144
O.D.
Fig. 2
B
Bore
C
Hub
Dia.
1/64
1/64
D
Hub
Proj.
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
.3125
.3125
.3125
51/64
51/64
51/64
51/64
51/64
51/64
51/64
51/64
51/64
51/64
55/64
55/64
55/64
55/64
55/64
55/64
55/64
15/16
15/16
15/16
7/16
1/2
1/2
9/16
9/16
5/8
11/16
3/4
13/16
15/16
1
1
1-1/16
1-3/16
1-3/16
1-1/4
1-3/8
1-1/2
1-1/2
1-1/2
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
5/16
5/16
5/16
5/16
5/16
5/16
5/16
25/64
25/64
25/64
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
.3125
.375
.375
.375
.375
.375
.375
.375
15/16
15/16
15/16
15/16
15/16
15/16
15/16
15/16
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
25/64
25/64
25/64
25/64
25/64
25/64
25/64
25/64
#8-32
#10-32
#10-32
#10-32
#10-32
#10-32
#10-32
#10-32
+.001
-.000
E
Length
Set
Screw

.250 BORE
DOUBLE FLANGE
PROFILE
R
Inch
MATERIAL:
Aluminum Alloy
FINISH:
T
1
Clear Anodized
SPECIFICATIONS:
O.D. Tolerance:
12 to 16 grooves is +.002/-.000
17 to 32 grooves is +.003/-.000
34 grooves is +.004/-.000
25/32

2 set screws at 90.
D/2
#8-32
SET SCREW
F.D. O.D.
+.001
.250 -.000
.65
INCH COMPONENT
Catalog Number
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
6A25-012DF1508
6A25-013DF1508
6A25-014DF1508
6A25-015DF1508
6A25-016DF1508
6A25-017DF1508
6A25-018DF1508
6A25-019DF1508
6A25-020DF1508
6A25-022DF1508
6A25-024DF1508
6A25-025DF1508
6A25-026DF1508
6A25-028DF1508
6A25-030DF1508
6A25-032DF1508
6A25-034DF1508
No.
of
Grooves
P.D.
O.D.
12
13
14
15
16
17
18
19
20
22
24
25
26
28
30
32
34
.752
.815
.877
.940
1.003
1.065
1.128
1.191
1.253
1.379
1.504
1.566
1.629
1.754
1.880
2.005
2.130
.707
.770
.832
.895
.958
1.020
1.083
1.146
1.208
1.334
1.459
1.521
1.584
1.709
1.835
1.960
2.085
F.D.
1/64
7/8
15/16
1
1-1/16
1-3/32
1-3/16
1-1/4
1-5/16
1-3/8
1-1/2
1-5/8
1-11/16
1-3/4
1-7/8
2
2-1/8
2-1/4
E
Length
1/64
1-1/32
1-1/32
1-1/32
1-1/32
1-1/32
1-1/32
1-1/32
1-1/32
1-1/32
1-1/32
1-3/32
1-3/32
1-3/32
1-3/32
1-3/32
1-3/32
1-3/32
C
Hub
Dia.
1/64
7/16
1/2
1/2
9/16
9/16
5/8
11/16
3/4
13/16
15/16
1
1
1-1/16
1-3/16
1-3/16
1-1/4
1-3/8
D
Hub
Proj.
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
5/16
5/16
5/16
5/16
5/16
5/16
5/16
7
8
9
10
11
12
13
14
15
2-145
16
I
R
T


NO FLANGE
PROFILE
Inch
MATERIAL:
Aluminum Alloy
FINISH:
Clear Anodized
SPECIFICATIONS:
2
3
4
O.D. Tolerance:
12 to 16 grooves is
17 to 32 grooves is
34 to 62 grooves is
70 & 72 grooves is
+.002/-.000
+.003/-.000
+.004/-.000
+.005/-.000
E
25/32
E
25/32

2 set screws at 90.
D/2
O.D.
D
D/2
SET
SCREW
SET SCREW
B C
O.D.
B C
5
6
Fig. 1
INCH COMPONENT
7
8
9
10
11
12
13
14
15
16
No.
of
Grooves
P.D.
6A25-012NF1508
6A25-013NF1508
6A25-014NF1508
6A25-015NF1508
6A25-016NF1508
6A25-017NF1508
6A25-018NF1508
6A25-019NF1508
6A25-020NF1508
6A25-022NF1508
6A25-024NF1508
6A25-025NF1508
6A25-026NF1508
6A25-028NF1508
6A25-030NF1508
6A25-032NF1508
6A25-034NF1508
6A25-036NF1510
6A25-038NF1510
6A25-040NF1510
12
13
14
15
16
17
18
19
20
22
24
25
26
28
30
32
34
36
38
40
.752
.815
.877
.940
1.003
1.065
1.128
1.191
1.253
1.379
1.504
1.566
1.629
1.754
1.880
2.005
2.130
2.256
2.381
2.506
.707
.770
.832
.895
.958
1.020
1.083
1.146
1.208
1.334
1.459
1.521
1.584
1.709
1.835
1.960
2.085
2.211
2.336
2.461
6A25-044NF1510
6A25-048NF1512
6A25-050NF1512
6A25-056NF1512
6A25-060NF1512
6A25-062NF1512
6A25-070NF1512
6A25-072NF1512
44
48
50
56
60
62
70
72
2.757
3.008
3.133
3.509
3.760
3.885
4.386
4.511
2.712
2.963
3.088
3.464
3.715
3.840
4.341
4.466
Catalog Number
Fig. 1
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
Fig. 2
A
A
A
A
A
A
A
A
2-146
O.D.
Fig. 2
B
Bore
C
Hub
Dia.
1/64
1/64
D
Hub
Proj.
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
.3125
.3125
.3125
1-1/32
1-1/32
1-1/32
1-1/32
1-1/32
1-1/32
1-1/32
1-1/32
1-1/32
1-1/32
1-1/32
1-1/32
1-1/32
1-1/32
1-1/32
1-1/32
1-1/32
1-3/16
1-3/16
1-3/16
7/16
1/2
1/2
9/16
9/16
5/8
11/16
3/4
13/16
15/16
1
1
1-1/16
1-3/16
1-3/16
1-1/4
1-3/8
1-1/2
1-1/2
1-1/2
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
5/16
5/16
5/16
5/16
5/16
5/16
5/16
13/32
13/32
13/32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
.3125
.375
.375
.375
.375
.375
.375
.375
1-3/16
1-3/16
1-3/16
1-3/16
1-3/16
1-3/16
1-3/16
1-3/16
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
13/32
13/32
13/32
13/32
13/32
13/32
13/32
13/32
#8-32
#10-32
#10-32
#10-32
#10-32
#10-32
#10-32
#10-32
+.001
-.000
E
Length
Set
Screw

SINGLE AND DOUBLE FLANGE
PROFILE
R
Inch
MATERIAL:

T
1
SPECIFICATION:

do not have webs.
13/16
3/16
1/2
13/16
1/4
1/16
O.D. A B
CAP
SCREW
C F.D.
1/4
3/16
1/16
1/2
O.D. A B
CAP SCREW
3
4
C F.D.
5
7/16
7/16
Fig. 2
Fig. 1
INCH COMPONENT
Catalog Number
Fig. 1
Single Flange
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
6H25-011SF0906
6H25-012SF0906
6H25-013SF0906
6H25-014SF0908
6H25-015SF0908
6H25-016SF0908
6H25-017SF0908
6H25-018SF0908
6H25-019SF0908
6H25-020SF0908
6H25-022SF0908
6H25-025SF0908
6H25-028SF0908
6H25-029SF0908
6H25-030SF0908
6H25-040SF0910
6H25-050SF0910
Fig. 2
Double Flange
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
6H25-011DF0906
6H25-012DF0906
6H25-013DF0906
6H25-014DF0908
6H25-015DF0908
6H25-016DF0908
6H25-017DF0908
6H25-018DF0908
6H25-019DF0908
6H25-020DF0908
6H25-022DF0908
6H25-025DF0908
6H25-028DF0908
6H25-029DF0908
6H25-030DF0908
6H25-040DF0910
6H25-050DF0910
No.
of
P.D.
Grooves
11
12
13
14
15
16
17
18
19
20
22
25
28
29
30
40
50
.689
.752
.815
.877
.940
1.003
1.065
1.128
1.191
1.253
1.379
1.566
1.754
1.817
1.880
2.506
3.133
O.D.
F.D.
B
Bore
.644
.707
.770
.832
.895
.958
1.020
1.083
1.146
1.208
1.334
1.521
1.709
1.772
1.835
2.461
3.088
.87
.93
.99
1.06
1.19
1.19
1.24
1.31
1.38
1.44
1.57
1.76
1.95
2.02
2.08
2.71
3.29
.1875
.1875
.1875
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
.3125
.3125
+.001
-.000
A
Dia.
C
Hub
Dia.
Cap
Screw
3/8
3/8
3/8
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
5/8
5/8
1/2
1/2
1/2
3/4
3/4
3/4
3/4
3/4
3/4
3/4
7/8
7/8
7/8
7/8
7/8
7/8
7/8
#2-56
#2-56
#2-56
#4-40
#4-40
#4-40
#4-40
#4-40
#4-40
#4-40
#4-40
#4-40
#4-40
#4-40
#4-40
#4-40
#4-40
7
8
9
10
11
12
13
14
15
2-147
16
I
R

SINGLE AND DOUBLE FLANGE
PROFILE
MATERIAL:
SPECIFICATION:
Inch


do not have webs.
13/16
13/16
1/4
1/16
1/8
SET
SCREW
4
O.D. A
B C F.D.
1/4
1/16
1/8
SET
SCREW
O.D. A
B C F.D.
5
3/16
6
7
9
10
11
12
13
Fig. 1
Single Flange
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
6J25-011SF0906
6J25-012SF0906
6J25-013SF0906
6J25-014SF0908
6J25-015SF0908
6J25-016SF0908
6J25-017SF0908
6J25-018SF0908
6J25-019SF0908
6J25-020SF0908
6J25-022SF0908
6J25-025SF0908
6J25-028SF0908
6J25-029SF0908
6J25-030SF0908
6J25-040SF0910
6J25-050SF0910
14
15
16
7/16
Fig. 2
INCH COMPONENT
Catalog Number
3/16
7/16
Fig. 1
2-148
Fig. 2
Double Flange
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
6J25-011DF0906
6J25-012DF0906
6J25-013DF0906
6J25-014DF0908
6J25-015DF0908
6J25-016DF0908
6J25-017DF0908
6J25-018DF0908
6J25-019DF0908
6J25-020DF0908
6J25-022DF0908
6J25-025DF0908
6J25-028DF0908
6J25-029DF0908
6J25-030DF0908
6J25-040DF0910
6J25-050DF0910
No.
of
P.D.
Grooves
11
12
13
14
15
16
17
18
19
20
22
25
28
29
30
40
50
.689
.752
.815
.877
.940
1.003
1.065
1.128
1.191
1.253
1.379
1.566
1.754
1.817
1.880
2.506
3.133
O.D.
F.D.
B
Bore
.644
.707
.770
.832
.895
.958
1.020
1.083
1.146
1.208
1.334
1.521
1.709
1.772
1.835
2.461
3.088
.87
.93
.99
1.06
1.19
1.19
1.24
1.31
1.38
1.44
1.57
1.76
1.95
2.02
2.08
2.71
3.29
.1875
.1875
.1875
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
.3125
.3125
+.001
-.000
A
Dia.
C
Hub
Dia.
Cap
Screw
3/8
3/8
3/8
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
5/8
5/8
1/2
1/2
1/2
3/4
3/4
3/4
3/4
3/4
3/4
3/4
7/8
7/8
7/8
7/8
7/8
7/8
7/8
#6-32
#6-32
#6-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#10-32
#10-32

MOLDED WITH INSERT
DOUBLE FLANGE
PROFILE
R
Inch
MATERIAL:

T
1
2
13/16
1/4
9/64
SET
SCREW
O.D. A
B C F.D.
SPOT DRILL
7/16
INCH COMPONENT
Catalog Number
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
6Z25-011DF0906
6Z25-011DF0908
6Z25-012DF0906
6Z25-012DF0908
6Z25-013DF0906
6Z25-013DF0908
6Z25-014DF0906
6Z25-014DF0908
6Z25-015DF0908
6Z25-015DF0910
6Z25-015DF0912
6Z25-016DF0908
6Z25-016DF0910
6Z25-016DF0912
6Z25-017DF0908
6Z25-017DF0910
6Z25-017DF0912
6Z25-018DF0908
6Z25-018DF0910
6Z25-018DF0912
6Z25-019DF0908
6Z25-019DF0910
6Z25-019DF0912
No.
of
Grooves
P.D.
O.D.
F.D.
11
11
12
12
13
13
14
14
15
15
15
16
16
16
17
17
17
18
18
18
19
19
19
.689
.689
.752
.752
.815
.815
.877
.877
.940
.940
.940
1.003
1.003
1.003
1.065
1.065
1.065
1.128
1.128
1.128
1.191
1.191
1.191
.644
.644
.707
.707
.770
.770
.832
.832
.895
.895
.895
.958
.958
.958
1.020
1.020
1.020
1.083
1.083
1.083
1.146
1.146
1.146
.87
.87
.93
.93
.99
.99
1.06
1.06
1.19
1.19
1.19
1.19
1.19
1.19
1.24
1.24
1.24
1.31
1.31
1.31
1.38
1.38
1.38
B
Bore
+.001
-.000
.1875
.250
.1875
.250
.1875
.250
.1875
.250
.250
.3125
.375
.250
.3125
.375
.250
.3125
.375
.250
.3125
.375
.250
.3125
.375
A
Dia.
C
Hub
Dia.
Set
Screw
#6-32
11/16
3/8
#6-32
11/16
3/8
#6-32
11/16
3/8
11/16
#6-32
3/8
#6-32
11/16
3/8
#6-32
11/16
3/8
#6-32
3/8
11/16
#6-32
11/16
3/8
3/4
#8-32
1/2
#8-32
3/4
1/2
#8-32
3/4
1/2
#8-32
3/4
1/2
#8-32
1/2
3/4
#8-32
3/4
1/2
3/4
#8-32
1/2
#8-32
3/4
1/2
#8-32
3/4
1/2
#8-32
1/2
3/4
#8-32
1/2
3/4
#8-32
3/4
1/2
3/4
#8-32
1/2
3/4
#8-32
1/2
#8-32
1/2
3/4
6
7
8
9
10
11
12
13
14
15
2-149
16
I
R
T

MOLDED WITH INSERT
DOUBLE FLANGE
PROFILE
Inch
MATERIAL:

1
2
7/8
13/16
SET
SCREW
SET
SCREW
O.D. A
B C F.D.
O.D. A
B C F.D.
SPOT
DRILL
3/16
5/16
5/32
1/4
9/64
7/16
SPOT
DRILL
3/16
7/16
Fig. 1
Fig. 2
INCH COMPONENT
7
8
9
10
11
12
13
14
No.
of
Grooves
P.D.
O.D.
F.D.
B
Bore
6Z25-020DF0908
6Z25-020DF0910
6Z25-020DF0912
6Z25-022DF0908
6Z25-022DF0910
6Z25-022DF0912
6Z25-025DF0908
6Z25-025DF0910
6Z25-025DF0912
6Z25-028DF0908
6Z25-028DF0910
6Z25-028DF0912
6Z25-029DF0908
6Z25-029DF0910
6Z25-029DF0912
6Z25-030DF0908
6Z25-030DF0910
6Z25-030DF0912
20
20
20
22
22
22
25
25
25
28
28
28
29
29
29
30
30
30
1.253
1.253
1.253
1.379
1.379
1.379
1.566
1.566
1.566
1.754
1.754
1.754
1.817
1.817
1.817
1.880
1.880
1.880
1.208
1.208
1.208
1.334
1.334
1.334
1.521
1.521
1.521
1.709
1.709
1.709
1.772
1.772
1.772
1.835
1.835
1.835
1.44
1.44
1.44
1.57
1.57
1.57
1.76
1.76
1.76
1.95
1.95
1.95
2.02
2.02
2.02
2.08
2.08
2.08
6Z25-040DF0910
6Z25-040DF0912
6Z25-040DF0916
6Z25-050DF0910
6Z25-050DF0912
6Z25-050DF0916
40
40
40
50
50
50
2.506
2.506
2.506
3.133
3.133
3.133
2.461
2.461
2.461
3.088
3.088
3.088
2.71
2.71
2.71
3.29
3.29
3.29
Catalog Number
Fig. 1
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
Fig. 2
A
A
A
A
A
A
A
Dia.
C
Hub
Dia.
Set
Screw
.250
.3125
.375
.250
.3125
.375
.250
.3125
.375
.250
.3125
.375
.250
.3125
.375
.250
.3125
.375
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
3/4
3/4
3/4
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
.3125
.375
.500
.3125
.375
.500
5/8
5/8
5/8
5/8
5/8
5/8
7/8
7/8
7/8
7/8
7/8
7/8
#10-32
#10-32
#10-32
#10-32
#10-32
#10-32
+.001
-.000
15
16
2-150

MOLDED WITH INSERT
SINGLE FLANGE
PROFILE
R
Inch
MATERIAL:

T
1
2
13/16
1/4
9/64
SET
SCREW
1/2
O.D. A
3
4
B C F.D.
SPOT DRILL
7/16
6
INCH COMPONENT
Catalog Number
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
6Z25-011SF0906
6Z25-011SF0908
6Z25-012SF0906
6Z25-012SF0908
6Z25-013SF0906
6Z25-013SF0908
6Z25-014SF0906
6Z25-014SF0908
6Z25-015SF0908
6Z25-015SF0910
6Z25-015SF0912
6Z25-016SF0908
6Z25-016SF0910
6Z25-016SF0912
6Z25-017SF0908
6Z25-017SF0910
6Z25-017SF0912
6Z25-018SF0908
6Z25-018SF0910
6Z25-018SF0912
6Z25-019SF0908
6Z25-019SF0910
6Z25-019SF0912
No.
of
Grooves
P.D.
O.D.
F.D.
11
11
12
12
13
13
14
14
15
15
15
16
16
16
17
17
17
18
18
18
19
19
19
.689
.689
.752
.752
.815
.815
.877
.877
.940
.940
.940
1.003
1.003
1.003
1.065
1.065
1.065
1.128
1.128
1.128
1.191
1.191
1.191
.644
.644
.707
.707
.770
.770
.832
.832
.895
.895
.895
.958
.958
.958
1.020
1.020
1.020
1.083
1.083
1.083
1.146
1.146
1.146
.87
.87
.93
.93
.99
.99
1.06
1.06
1.19
1.19
1.19
1.19
1.19
1.19
1.24
1.24
1.24
1.31
1.31
1.31
1.38
1.38
1.38
B
Bore
+.001
-.000
.1875
.250
.1875
.250
.1875
.250
.1875
.250
.250
.3125
.375
.250
.3125
.375
.250
.3125
.375
.250
.3125
.375
.250
.3125
.375
A
Dia.
C
Hub
Dia.
Set
Screw
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
11/16
11/16
11/16
11/16
11/16
11/16
11/16
11/16
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
#6-32
#6-32
#6-32
#6-32
#6-32
#6-32
#6-32
#6-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
7
8
9
10
11
12
13
14
15
2-151
16
I
R
T

MOLDED WITH INSERT
SINGLE FLANGE
PROFILE
Inch
MATERIAL:

1
2
13/16
13/16
1/2
5/16
5/32
1/4
9/64
SET
SCREW
O.D. A
B C F.D.
SET
SCREW
O.D. A
B C F.D.
SPOT DRILL
3/16
7/16
SPOT
DRILL
3/16
Fig. 1
7/16
Fig. 2
INCH COMPONENT
7
8
9
10
11
12
13
14
No.
of
Grooves
P.D.
O.D.
F.D.
B
Bore
6Z25-020SF0908
6Z25-020SF0910
6Z25-020SF0912
6Z25-022SF0908
6Z25-022SF0910
6Z25-022SF0912
6Z25-025SF0908
6Z25-025SF0910
6Z25-025SF0912
6Z25-028SF0908
6Z25-028SF0910
6Z25-028SF0912
6Z25-029SF0908
6Z25-029SF0910
6Z25-029SF0912
6Z25-030SF0908
6Z25-030SF0910
6Z25-030SF0912
20
20
20
22
22
22
25
25
25
28
28
28
29
29
29
30
30
30
1.253
1.253
1.253
1.379
1.379
1.379
1.566
1.566
1.566
1.754
1.754
1.754
1.817
1.817
1.817
1.880
1.880
1.880
1.208
1.208
1.208
1.334
1.334
1.334
1.521
1.521
1.521
1.709
1.709
1.709
1.772
1.772
1.772
1.835
1.835
1.835
1.44
1.44
1.44
1.57
1.57
1.57
1.76
1.76
1.76
1.95
1.95
1.95
2.02
2.02
2.02
2.08
2.08
2.08
6Z25-040SF0910
6Z25-040SF0912
6Z25-040SF0916
6Z25-050SF0910
6Z25-050SF0912
6Z25-050SF0916
40
40
40
50
50
50
2.506
2.506
2.506
3.133
3.133
3.133
2.461
2.461
2.461
3.088
3.088
3.088
2.71
2.71
2.71
3.29
3.29
3.29
Catalog Number
Fig. 1
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
Fig. 2
A
A
A
A
A
A
A
Dia.
C
Hub
Dia.
Set
Screw
.250
.3125
.375
.250
.3125
.375
.250
.3125
.375
.250
.3125
.375
.250
.3125
.375
.250
.3125
.375
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
3/4
3/4
3/4
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
.3125
.375
.500
.3125
.375
.500
5/8
5/8
5/8
5/8
5/8
5/8
7/8
7/8
7/8
7/8
7/8
7/8
#10-32
#10-32
#10-32
#10-32
#10-32
#10-32
+.001
-.000
15
16
2-152

MOLDED
DOUBLE FLANGE
PROFILE
R
Inch
MATERIAL:
SPECIFICATION:
T
1

do not have webs.
2
7/8
13/16
B
C F.D.
O.D.
13/16
5/16
1/4
7/16
O.D.
3/16
Fig. 1
C F.D.
7/16
Fig. 2
6
INCH COMPONENT
No.
of
Grooves
P.D.
O.D.
F.D.
B
Bore
+.001
-.000
C
Hub
Dia.
6L25-011DF0906
6L25-012DF0906
6L25-013DF0906
6L25-014DF0906
6L25-015DF0908
6L25-016DF0908
6L25-017DF0908
6L25-018DF0908
6L25-019DF0908
6L25-020DF0908
6L25-022DF0908
6L25-025DF0908
6L25-028DF0908
6L25-029DF0908
6L25-030DF0908
11
12
13
14
15
16
17
18
19
20
22
25
28
29
30
.689
.752
.815
.877
.940
1.003
1.065
1.128
1.191
1.253
1.379
1.566
1.754
1.817
1.880
.644
.707
.770
.832
.895
.958
1.020
1.083
1.146
1.208
1.334
1.521
1.709
1.772
1.835
.87
.93
.99
1.06
1.19
1.19
1.24
1.31
1.38
1.44
1.57
1.76
1.95
2.02
2.08
.1875
.1875
.1875
.1875
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
11/16
11/16
11/16
11/16
3/4
3/4
3/4
3/4
3/4
3/4
7/8
7/8
7/8
7/8
7/8
6L25-040DF0910
6L25-050DF0910
40
50
2.506
3.133
2.461
3.088
2.71
3.29
.3125
.3125
7/8
7/8
Catalog Number
Fig. 1
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
Fig. 2
A
A
7
8
9
10
11
12
13
14
15
2-153
16
I
R

MOLDED
SINGLE FLANGE
PROFILE
MATERIAL:
SPECIFICATION:
Inch

do not have webs.
2
3
4
5
13/16
13/16
1/2
1/4
6
O.D. A
12
13
14
15
16
7/16
O.D.
3/16
Fig. 1
B C F.D.
Fig. 2
INCH COMPONENT
No.
of
Grooves
P.D.
O.D.
F.D.
B
Bore
6L25-011SF0906
6L25-012SF0906
6L25-013SF0906
6L25-014SF0906
6L25-015SF0908
6L25-016SF0908
6L25-017SF0908
6L25-018SF0908
6L25-019SF0908
6L25-020SF0908
6L25-022SF0908
6L25-025SF0908
6L25-028SF0908
6L25-029SF0908
6L25-030SF0908
11
12
13
14
15
16
17
18
19
20
22
25
28
29
30
.689
.752
.815
.877
.940
1.003
1.065
1.128
1.191
1.253
1.379
1.566
1.754
1.817
1.880
.644
.707
.770
.832
.895
.958
1.020
1.083
1.146
1.208
1.334
1.521
1.709
1.772
1.835
.87
.93
.99
1.06
1.19
1.19
1.24
1.31
1.38
1.44
1.57
1.76
1.95
2.02
2.08
6L25-040SF0910
6L25-050SF0910
40
50
2.506
3.133
2.461
3.088
2.71
3.29
Catalog Number
11
C F.D.
3/16
10
5/16
1/2
Fig. 1
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
Fig. 2
A
A
2-154
A
Dia.
C
Hub
Dia.
.1875
.1875
.1875
.1875
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
3/8
3/8
3/8
3/8
3/8
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
11/16
11/16
11/16
11/16
11/16
3/4
3/4
3/4
3/4
3/4
7/8
7/8
7/8
7/8
7/8
.3125
.3125
7/8
7/8
+.001
-.000

MOLDED WITH INSERT
DOUBLE FLANGE
PROFILE
R
Inch
MATERIAL:

T
1
1-1/8
5/16
21/32
5/64
3/32
5/32
B D C
F.D. O.D. E
#10-24
SET SCREW
3/64
Fig. 1
1-1/8
1-1/8
5/16
21/32
5/16
21/32
5/32
5/32
6
F.D.
O.D.
B D C
F.D.
O.D.
B D C
#10-24
SET SCREW
#10-24
SET SCREW
Fig. 2
Fig. 3
INCH COMPONENT
Insert Dia.s
+.001
-.000
D
O.D.
E
Step
.87
1.00
1.09
1.25
1.37
1.50
1.61
.2505
.2505
.2505
.2505
.2505
.2505
.2505
3/4
3/4
7/8
1-1/4
1-1/4
1-1/4
1-1/4
5/8
5/8
3/4
1-1/8
1-1/8
1-1/8
1-1/8
7/16
9/16
21/32
7/8
15/16
1
1
1.709
1.835
1.87
2.00
.2505
.2505
1-1/4
1-1/4
1-1/8
1-1/8
1
1
1.960
2.211
2.461
2.587
2.963
3.088
3.715
3.840
2.12
2.41
2.71
2.79
3.13
3.26
3.89
4.03
.2505
.313
.313
.313
.313
.3755
.3755
.3755
1-1/4
1-1/4
1-1/4
1-1/4
1-1/4
1-1/4
1-1/4
1-1/4
1-1/8
1-1/8
1-1/8
1-1/8
1-1/8
1-1/8
1-1/8
1-1/8
1
1
1
1
1
1
1
1
P.D.
6E25-12DF1508
6E25-14DF1508
6E25-16DF1508
6E25-18DF1508
6E25-20DF1508
6E25-22DF1508
6E25-24DF1508
12
14
16
18
20
22
24
.752
.877
1.003
1.128
1.253
1.379
1.504
.707
.832
.958
1.083
1.208
1.334
1.459
A 6E25-28DF1508
A 6E25-30DF1508
28
30
1.754
1.880
A
A
A
A
A
A
A
A
32
36
40
42
48
50
60
62
2.005
2.256
2.506
2.632
3.008
3.133
3.760
3.885
Catalog Number
B
Bore
C
Hub
Dia.
No.
of
Grooves
O.D.
F.D.
Fig. 1
Fig. 2
Fig. 3
A
A
A
A
A
A
A
6E25-32DF1508
6E25-36DF1510
6E25-40DF1510
6E25-42DF1510
6E25-48DF1510
6E25-50DF1512
6E25-60DF1512
6E25-62DF1512
2-155
9
10
11
12
13
14
15
16
I
R
T

MOLDED WITH INSERT
SINGLE FLANGE
PROFILE
Inch
MATERIAL:

1
1-3/32
2
45/64
5/16
5/64
5/32
3
F.D. O.D. E
B D C
#10-24
SET SCREW
Fig. 1
1-3/32
1-3/32
5/16
45/64
5/16*
45/64
5/32
5/32
6
7
F.D. O.D. E
No.
of
Grooves
P.D.
O.D.
F.D.
B
Bore
+.001
-.000
C
Hub
Dia.
D
O.D.
E
Step
6E25-12SF1508
6E25-16SF1508
6E25-18SF1508
6E25-22SF1508
12
16
18
22
.752
1.003
1.128
1.379
.707
.958
1.083
1.334
.87
1.09
1.25
1.50
.2505
.2505
.2505
.2505
3/4
7/8
1-1/4
1-1/4
5/8
3/4
1-1/8
1-1/8
7/16
21/32
7/8
1
A 6E25-28SF1508
28
1.754
1.709
1.87
.313
1-1/4
1-1/8
36
38
40
42
44
56
60
62
72
2.256
2.381
2.506
2.632
2.757
3.509
3.760
3.885
4.511
2.211
2.336
2.461
2.587
2.712
3.464
3.715
3.840
4.466
2.41
2.54
2.71
2.79
2.91
3.63
3.89
4.10
4.67
.313
.313
.313
.313
.313
.3755
.3755
.3755
.3755
1-1/4
1-1/4
1-1/4
1-1/4
1-1/4
1-1/4
1-1/4
1-1/4
1-1/4
1-1/8
1-1/8
1-1/8
1-1/8
1-1/8
1-1/8
1-1/8
1-1/8
1-1/8
1
1
1
1
1
1
1
1
1
14
15
16
Insert Dia.s
Fig. 1
Fig. 2
13
Fig. 3
INCH COMPONENT
11
12
#10-24
SET SCREW
Fig. 2
Catalog Number
10
B D C
#10-24
SET SCREW
8
9
F.D. O.D. E
B D C
Fig. 3
A
A
A
A
A
A
A
A
A
A
A
A
*A
6E25-36SF1510
6E25-38SF1510
6E25-40SF1510
6E25-42SF1510
6E25-44SF1510
6E25-56SF1510
6E25-60SF1512
6E25-62SF1512
6E25-72SF1512
* Hub projection is 1/2" & overall length is 1-9/32".
2-156
SHAFTLOC HTD PULLEYS 5 mm PITCH

PATENTED
R
Inch
MATERIAL:

13/16
.78
SPECIFICATION:
do not have webs.
F.D. O.D.
.78
INCH COMPONENT
Fig. 1
Catalog Number
Single Flange
Fig. 1
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
*A
A
6T25-H19SF1520
6T25-H20SF1524
6T25-H22SF1524
6T25-H24SF1524
6T25-H28SF1524
6T25-H30SF1524
6T25-H32SF1524
6T25-H36SF1524
6T25-H38SF1524
6T25-H40SF1524
6T25-H42SF1524
6T25-H44SF1524
6T25-H48SF1524
6T25-H50SF1524
6T25-H56SF1524
6T25-H60SF1524
6T25-H62SF1524
6T25-H64SF1524
6T25-H72SF1524
6T25-H80SF1524
Double Flange
Fig. 2
21/32
45/64
Fig. 2
No.
of
Grooves
P.D.
O.D.
F.D.
19
20
22
24
28
30
32
36
38
40
42
44
48
50
56
60
62
64
72
80
1.191
1.253
1.379
1.504
1.754
1.880
2.005
2.256
2.381
2.506
2.632
2.757
3.008
3.133
3.509
3.760
3.885
4.010
4.511
5.013
1.146
1.208
1.334
1.459
1.709
1.835
1.960
2.211
2.336
2.461
2.587
2.712
2.963
3.088
3.464
3.715
3.840
3.965
4.466
4.968
1.31
1.37
1.50
1.62
1.87
2.00
2.12
2.41
2.54
2.66
2.79
2.91
3.16
3.26
3.66
3.92
4.03
4.16
4.66
5.16
A
A
A
A
A
A
A
A
6T25-H19DF1520
6T25-H20DF1524
6T25-H22DF1524
6T25-H24DF1524
6T25-H28DF1524
6T25-H30DF1524
6T25-H32DF1524
6T25-H36DF1524
A 6T25-H62DF1524
B
Bore
+.002
-.000
.625
.750
.750
.750
.750
.750
.750
.750
.750
.750
.750
.750
.750
.750
.750
.750
.750
.750
.750
.750
C
Dia.
3/4
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
* Pulley has steel insert with 1-1/2" O.D.

(For Shaftloc Introduction and Use, see page 2-26)
MATERIAL:
SPECIFICATIONS:
1. A 3/4" O.D. x 5/8" I.D. x .05" thick washer,

2. A 7/8" O.D. x 3/4" I.D. x .05" thick washer,
Catalog Number
A 7Z37-030578
A 7Z37-040670
7/32
.625
.750
.375
.500
7
8
9
10
13
H
1/4
Max.
Shaftloc H
Torque
See Pulley Bore
Bore
Hex
Capacity*
Above
+.001
(Ref.)
Size
* Based on mating components
-.000
lbf in.
1
2
12
BORE
PULLEY
BORE
(REF.)
INCH COMPONENT
11
1/4
416 Stainless Steel
3/4
7/8
250
250
being degreased before assembly

??-??
14
15
16
D810 P2-158
D795 P40
Q460 P1-185
NEW
A 6E28--X
P 2 of 2
10-01-07 MH
REV: 07-25-12 mh

MOLDED WITH INSERT
DOUBLE FLANGE
PROFILE
R
Inch
MATERIAL:

Insert - Aluminum
T
1
Other bore sizes available on special request.
2
3
1.62
1.12
SET SCREW
F.D.
O.D.
6
7
.88
.13
INCH COMPONENT
Catalog Number
A
A
A
A
A
A
A
A
A
A
A
A
A
6E28-014DF2016
6E28-014DF2020
6E28-018DF2016
6E28-018DF2020
6E28-022DF2016
6E28-022DF2020
6E28-024DF2016
6E28-024DF2020
6E28-024DF2024
6E28-026DF2016
6E28-026DF2020
6E28-028DF2016
6E28-028DF2020
No.
of
Grooves
P.D.
.005
F.D.
14
14
18
18
22
22
24
24
24
26
26
28
28
1.404
1.404
1.804
1.804
2.206
2.206
2.406
2.406
2.406
2.607
2.607
2.807
2.807
1.350
1.350
1.751
1.751
2.152
2.152
2.352
2.352
2.352
2.553
2.553
2.753
2.753
1.75
1.75
2.15
2.15
2.56
2.56
2.75
2.75
2.75
2.95
2.95
3.15
3.15
O.D.
B
Bore
+.0015
+.0005
.5000
.6250
.5000
.6250
.5000
.6250
.5000
.6250
.7500
.5000
.6250
.5000
.6250
E
Hub
Dia.
Set
Screw
1.12
1.12
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
#10-24
#10-24
#10-24
1/4-20
#10-24
1/4-20
#10-24
1/4-20
1/4-20
#10-24
1/4-20
#10-24
1/4-20
9
10
11
12
13
14
15
2-158
REV: 07.27.12 mh
16

MOLDED WITH INSERT
SINGLE FLANGE
PROFILE
R
Inch
MATERIAL:

Insert - Aluminum
T
1
Other bore sizes available on special request.
2
1.56
1.06
.94
4
5
SET SCREW
B
F.D.
E
O.D.
7
8
INCH COMPONENT
Catalog Number
A
A
A
A
A
A
A
A
A
A
A
A
6E28-030SF2016
6E28-030SF2020
6E28-032SF2016
6E28-034SF2016
6E28-036SF2016
6E28-036SF2020
6E28-038SF2016
6E28-040SF2016
6E28-040SF2020
6E28-044SF2016
6E28-048SF2020
6E28-056SF2020
No.
of
Grooves
P.D.
30
30
32
34
36
36
38
40
40
44
48
56
3.008
3.008
3.208
3.409
3.609
3.609
3.810
4.010
4.010
4.411
4.812
5.614
O.D.
.005
2.954
2.954
3.154
3.355
3.555
3.555
3.756
3.956
3.956
4.357
4.758
5.560
F.D.
3.35
3.35
3.54
3.82
3.93
3.93
4.13
4.33
4.33
4.77
5.16
5.95
B
Bore
+.0015
+.0005
.5000
.6250
.5000
.5000
.5000
.6250
.5000
.5000
.6250
.5000
.6250
.6250
9
E
Hub
Dia.
Set
Screw
1.50
1.50
1.50
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
#10-24
1/4-20
#10-24
#10-24
#10-24
1/4-20
#10-24
#10-24
1/4-20
#10-24
1/4-20
1/4-20
10
11
12
13
14
15
2-159
16
R
T
1
2
CLEAN RUNNING

Long life.
Low noise levels.
Inch
PROTECTION
3
4
5
6
7
8

-40F to +220F (-40C to +104C)
STRENGTH

High flex life.
RoHS COMPLIANT
APPLICATIONS:
Medical Equipment
Office Equipment
AVAILABLE IN:
MXL
XL
L
GT2 2, 3 and 5 mm
and other pitches
Fiberglass
Tensile
Cords
10
11
12
13
14
15
16
Nylon
Tooth
Facing
2-160
GT2 TIMING BELTS 2 mm PITCH

BELT WIDTHS
METRIC - 3, 6 & 9 mm
NON-MARKING
LOW DUST
RoHS COMPLIANT
PowerGrip TruMotion
Metric
10
R
T
MATERIAL:

SPECIFICATIONS:
Breaking Strength:
Working Tension:
Temperature Range:
-40C to +104C (-40F to +220F)
2
2
(.079)
1.52
(.060)
MODIFICATIONS:

METRIC COMPONENT
CATALOG NUMBER
A26R51M
No. of
Grooves
Code
Belt Width
mm
3 (.118)
6 (.236)
9 (.354)
Width
Code
030
060
090
0.76
(.030)
4
Groove
Code
048
050
056
062
063
065
066
067
068
070
076
079
080
082
083
084
086
089
090
093
096
100
101
104
105
106
108
110
112
118
120
125
126
129
137
Pitch Length
mm
Inch
Groove
Code
96
100
112
124
126
130
132
134
136
140
152
158
160
164
166
168
172
178
180
186
192
200
202
208
210
212
216
220
224
236
240
250
252
258
274
3.780
3.937
4.409
4.882
4.961
5.118
5.197
5.276
5.354
5.512
5.984
6.220
6.299
6.457
6.535
6.614
6.772
7.008
7.087
7.323
7.559
7.874
7.953
8.189
8.268
8.346
8.504
8.661
8.819
9.291
9.449
9.842
9.921
10.157
10.787
139
140
143
150
160
161
166
171
173
175
180
182
185
190
193
200
203
210
214
228
235
237
244
252
264
276
280
288
300
320
348
372
424
582
779
Pitch Length
mm
Inch
278
280
286
300
320
322
332
342
346
350
360
364
370
380
386
400
406
420
428
456
470
474
488
504
528
552
560
576
600
640
696
744
848
1164
1558
10.945
11.024
11.260
11.811
12.598
12.677
13.071
13.465
13.622
13.779
14.173
14.331
14.567
14.961
15.197
15.748
15.984
16.535
16.850
17.953
18.504
18.661
19.213
19.842
20.787
21.732
22.047
22.677
23.622
25.197
27.401
29.291
33.386
45.827
61.339
2-161
REV: 05.25.12 mh
5
6
7
8
9
10
11
12
13
14
15
16
I
R
T

BELT WIDTHS
METRIC - 3, 6 & 9 mm
PROFILE
Metric
Inch
MATERIAL:
101
SPECIFICATIONS:
1
2
3
4
5
Breaking Strength:
Working Tension:
111 N for 25.4 mm belt (25 lbf for 1 in. belt)
Temperature Range:
-34C to +85C (-30F to +185F)
2
(.079)
1.52
(.060)
MODIFICATIONS:

METRIC COMPONENT
CATALOG NUMBER
A 6R51M
No. of
Grooves
Code
Belt Width
mm
3 (.118)
6 (.236)
9 (.354)
7
8
9
10
11
12
13
14
15
076
(.030)
Width
Code
030
060
090
Groove
Code
027
029
030
033
036
037
038
039
041
042
043
044
045
046
047
048
049
050
051
053
054
055
056
057
058
059
060
061
062
063
064
065
066
067
068
069
070
071
Pitch Length
mm
Inch
Groove
Code
54
58
60
66
72
74
76
78
82
84
86
88
90
92
94
96
98
100
102
106
108
110
112
114
116
118
120
122
124
126
128
130
132
134
136
138
140
142
2.126
2.283
2.362
2.598
2.835
2.913
2.992
3.071
3.228
3.307
3.386
3.465
3.543
3.622
3.701
3.780
3.858
3.937
4.016
4.173
4.252
4.331
4.409
4.488
4.567
4.646
4.724
4.803
4.882
4.961
5.039
5.118
5.197
5.276
5.354
5.433
5.512
5.591
072
073
074
075
076
077
078
079
080
081
082
083
084
085
086
087
088
089
090
091
092
093
094
095
096
097
098
100
101
102
103
104
105
106
107
108
110
112
Pitch Length
mm
Inch
144
146
148
150
152
154
156
158
160
162
164
166
168
170
172
174
176
178
180
182
184
186
188
190
192
194
196
200
202
204
206
208
210
212
214
216
220
224
5.669
5.748
5.827
5.906
5.984
6.063
6.142
6.220
6.299
6.378
6.457
6.535
6.614
6.693
6.772
6.850
6.929
7.008
7.087
7.165
7.244
7.323
7.402
7.480
7.559
7.638
7.717
7.874
7.953
8.031
8.110
8.189
8.268
8.346
8.425
8.504
8.661
8.819
16
2-162

Groove
Code
113
114
115
116
118
120
121
122
124
125
126
127
128
129
130
132
133
134
135
137
139
140
141
142
143
144
145
146
147
150
151
152
154
155
157
159
160
161
162
163
164
165
166
168
169
170
171
172
173
175
176
177
178
179
180
182
183
185
Pitch Length
mm
Inch
Groove
Code
226
228
230
232
236
240
242
244
248
250
252
254
256
258
260
264
266
268
270
274
278
280
282
284
286
288
290
292
294
300
302
304
308
310
314
318
320
322
324
326
328
330
332
336
338
340
342
344
346
350
352
354
356
358
360
364
366
370
8.898
8.976
9.055
9.134
9.291
9.449
9.528
9.606
9.764
9.842
9.921
10.000
10.079
10.157
10.236
10.394
10.472
10.551
10.630
10.787
10.945
11.024
11.102
11.181
11.260
11.339
11.417
11.496
11.575
11.811
11.890
11.969
12.126
12.205
12.362
12.520
12.598
12.677
12.756
12.835
12.913
12.992
13.071
13.228
13.307
13.386
13.465
13.543
13.622
13.779
13.858
13.937
14.016
14.094
14.173
14.331
14.409
14.567
186
188
190
191
193
196
197
200
203
206
210
213
214
215
218
220
222
223
224
226
228
230
233
235
237
239
240
242
243
244
246
247
250
251
252
253
258
262
264
265
267
272
275
276
279
280
285
286
288
289
293
299
300
303
308
315
317
320
Pitch Length
mm
Inch
372
376
380
382
386
392
394
400
406
412
420
426
428
430
436
440
444
446
448
452
456
460
466
470
474
478
480
484
486
488
492
494
500
502
504
506
516
524
528
530
534
544
550
552
558
560
570
572
576
578
586
598
600
606
616
630
634
640
14.646
14.803
14.961
15.039
15.197
15.433
15.512
15.748
15.984
16.220
16.535
16.772
16.850
16.929
17.165
17.323
17.480
17.559
17.638
17.795
17.953
18.110
18.346
18.504
18.661
18.819
18.898
19.055
19.134
19.213
19.370
19.449
19.685
19.764
19.842
19.921
20.315
20.630
20.787
20.866
21.024
21.417
21.654
21.732
21.969
22.047
22.441
22.520
22.677
22.756
23.071
23.543
23.622
23.858
24.252
24.803
24.961
25.197
Groove
Code
323
330
335
338
345
348
351
363
371
372
376
380
386
391
400
405
408
424
426
430
433
446
450
465
475
488
497
502
514
516
533
534
555
570
582
590
605
614
617
628
655
660
672
680
693
717
762
779
830
844
850
905
915
925
930
955
*1109
Pitch Length
mm
Inch
646
660
670
676
690
696
702
726
742
744
752
760
772
782
800
810
816
848
852
860
866
892
900
930
950
976
994
1004
1028
1032
1066
1068
1110
1140
1164
1180
1210
1228
1234
1256
1310
1320
1344
1360
1386
1434
1524
1558
1660
1688
1700
1810
1830
1850
1860
1910
2218
25.433
25.984
26.378
26.614
27.165
27.401
27.638
28.583
29.213
29.291
29.606
29.921
30.394
30.787
31.496
31.890
32.126
33.386
33.543
33.858
34.094
35.118
35.433
36.614
37.402
38.425
39.134
39.528
40.472
40.630
41.969
42.047
43.701
44.882
45.827
46.457
47.638
48.346
48.583
49.449
51.575
51.969
52.913
53.543
54.567
56.457
60.000
61.339
65.354
66.457
66.929
71.260
72.047
72.835
73.228
75.197
87.323
Metric
Inch
101
R
T
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
* The catalog number for this length belt is A 6R51MB09

2-163
16
GT2 PULLEY FLANGES 2 mm PITCH

PROFILE
MATERIAL:
Metric
Inch
Aluminum Alloy
SPECIFICATION:
101
Priced per 25 Pieces
1
2
4
METRIC COMPONENT
5
6
7
8
9
10
11
12
13
14
Catalog Number
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
6A50M010FA
6A50M011FA
6A50M012FA
6A50M013FA
6A50M014FA
6A50M015FA
6A50M016FA
6A50M018FA
6A50M020FA
6A50M021FA
6A50M022FA
6A50M024FA
6A50M025FA
6A50M026FA
6A50M028FA
6A50M030FA
6A50M032FA
6A50M033FA
6A50M034FA
6A50M035FA
6A50M036FA
6A50M038FA
6A50M040FA
6A50M042FA
6A50M044FA
6A50M045FA
6A50M048FA
6A50M050FA
6A50M054FA
6A50M060FA
15
16
Pulley
Grooves
(Ref.)
2-164
10
11
12
13
14
15
16
18
20
21
22
24
25
26
28
30
32
33
34
35
36
38
40
42
44
45
48
50
54
60
Metric
d
Dia.
0.08
4.8
5.4
5.5
6.2
6.9
7.5
8.2
9.5
10.8
11.5
11.5
12.8
13.5
14.1
14.6
15.9
17.2
17.9
18.3
19
19.7
21
22.2
23.5
24.8
26.5
26.9
28.2
30.5
34.4
Inch
D
Dia.
0.4
10.8
11.4
12.2
12.8
13.5
14.1
14.7
16.1
17.4
18
18.8
20
20.7
21.3
22.7
24
25.4
26
26.7
27.4
28.1
29.3
30.7
32
33.4
34
36.1
37.3
40
43.9
d
Dia.
.003
.188
.214
.218
.244
.270
.296
.322
.374
.426
.452
.452
.504
.530
.556
.574
.626
.678
.704
.722
.748
.774
.826
.874
.926
.978
1.044
1.058
1.110
1.200
1.356
D
Dia.
.015
.425
.450
.480
.505
.530
.555
.580
.635
.685
.710
.740
.790
.815
.840
.895
.945
1.000
1.025
1.050
1.080
1.105
1.155
1.210
1.260
1.315
1.340
1.420
1.470
1.575
1.730
H
Width
0.25
( .01)
1.14 (.045)
1.14 (.045)
1.14 (.045)
1.14 (.045)
1.14 (.045)
1.14 (.045)
1.14 (.045)
1.32 (.052)
1.32 (.052)
1.32 (.052)
1.32 (.052)
1.32 (.052)
1.32 (.052)
1.32 (.052)
1.32 (.052)
1.32 (.052)
1.32 (.052)
1.32 (.052)
1.32 (.052)
1.32 (.052)
1.32 (.052)
1.32 (.052)
1.52 (.06)
1.52 (.06)
1.52 (.06)
1.52 (.06)
1.52 (.06)
1.52 (.06)
1.52 (.06)
1.52 (.06)
S
Thickness
0.64 (.025)
0.64 (.025)
0.64 (.025)
0.64 (.025)
0.64 (.025)
0.64 (.025)
0.64 (.025)
0.81 (.032)
0.81 (.032)
0.81 (.032)
0.81 (.032)
0.81 (.032)
0.81 (.032)
0.81 (.032)
0.81 (.032)
0.81 (.032)
0.81 (.032)
0.81 (.032)
0.81 (.032)
0.81 (.032)
0.81 (.032)
0.81 (.032)
1.02 (.040)
1.02 (.040)
1.02 (.040)
1.02 (.040)
1.02 (.040)
1.02 (.040)
1.02 (.040)
1.02 (.040)
GT2 TIMING PULLEY STOCK 2 mm PITCH

PROFILE
MATERIAL:
Metric
Inch
Aluminum Alloy
SPECIFICATION:
101
D Tolerance:
10 to 40 grooves is +0.05/0 (+.002/-.000)
R
T
1
2
L1
D
D1
METRIC COMPONENT
Catalog Number
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
6A50M010GT05
6A50M011GT05
6A50M012GT05
6A50M013GT05
6A50M014GT08
6A50M015GT08
6A50M016GT08
6A50M017GT08
6A50M018GT08
6A50M019GT08
6A50M020GT10
6A50M021GT10
6A50M022GT10
6A50M023GT10
6A50M024GT13
6A50M025GT13
6A50M026GT13
6A50M027GT13
6A50M028GT13
6A50M029GT13
6A50M030GT15
6A50M031GT15
6A50M032GT15
6A50M033GT15
6A50M034GT15
6A50M035GT15
6A50M036GT15
6A50M037GT15
6A50M038GT15
6A50M039GT15
6A50M040GT15
Metric
No.
of
Grooves
P.D.
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
6.4
7
7.6
8.3
8.9
9.6
10.2
10.8
11.5
12.1
12.7
13.4
14
14.6
15.3
15.9
16.5
17.2
17.8
18.5
19.1
19.7
20.4
21
21.6
22.3
22.9
23.5
24.2
24.8
25.5
D
Dia.
5.9
6.5
7.1
7.8
8.4
9
9.7
10.3
11
11.6
12.2
12.9
13.5
14.1
14.8
15.4
16
16.7
17.6
18
18.6
19.2
19.9
20.5
21.1
21.8
22.4
23
23.7
24.3
25
Inch
P.D.
.251
.276
.301
.326
.351
.376
.401
.426
.451
.476
.501
.526
.551
.576
.602
.627
.652
.677
.702
.727
.752
.777
.802
.827
.852
.877
.902
.927
.952
.977
1.003
D
Dia.
.231
.256
.281
.306
.331
.356
.381
.406
.431
.456
.481
.506
.531
.556
.582
.607
.632
.657
.682
.707
.732
.757
.782
.807
.832
.857
.882
.907
.932
.957
.983
D1**
Shank
Dia.
7.9 (5/16)
7.9 (5/16)
7.9 (5/16)
9.5 (3/8)
9.5 (3/8)
9.5 (3/8)
9.5 (3/8)
9.5 (3/8)
9.5 (3/8)
9.5 (3/8)
9.5 (3/8)
9.5 (3/8)
9.5 (3/8)
9.5 (3/8)
12.7 (1/2)
12.7 (1/2)
12.7 (1/2)
12.7 (1/2)
12.7 (1/2)
12.7 (1/2)
12.7 (1/2)
12.7 (1/2)
12.7 (1/2)
12.7 (1/2)
12.7 (1/2)
12.7 (1/2)
12.7 (1/2)
12.7 (1/2)
12.7 (1/2)
12.7 (1/2)
12.7 (1/2)
L1
Shank
Length.
(Ref.)
25 (1)
25 (1)
25 (1)
25 (1)
25 (1)
25 (1)
25 (1)
25 (1)
25 (1)
25 (1)
25 (1)
22 (7/8)
22 (7/8)
22 (7/8)
25
(1)
19
[ (3/4)
]
L
Min.
Usable
Length
50 (2)
50 (2)
50 (2)
50 (2)
75 (3)
75 (3)
75 (3)
75 (3)
75 (3)
75 (3)
100 (4)
100 (4)
100 (4)
100 (4)
125 (5)
125 (5)
125 (5)
125 (5)
125 (5)
125 (5)
150 (6)
150 (6)
150 (6)
150 (6)
150 (6)
150 (6)
150 (6)
150 (6)
150 (6)
150 (6)
150 (6)

** Shank Diameter of 4.7 mm (3/16") or 5.5 mm (7/32") for pulleys with 10 to 12 grooves may be substituted at SDP option.
Shank Diameter of 6.3 mm (1/4") for pulleys with 13 & 14 grooves may be substituted at SDP option.
Shank Diameter of 7.9 mm (5/16") for pulleys with 15 & 17 grooves may be substituted at SDP option.
2-165
5
6
7
8
9
10
11
12
13
14
15
16
GT 2 TIMING PULLEY STOCK 2 mm PITCH

PROFILE
MATERIAL:
Metric
Inch
Aluminum Alloy
T
1
SPECIFICATIONS:
101
D Tolerance:
42 to 80 grooves is +0.08/0 (+.003/-.000)
82 to 150 grooves is +0.10/0 (+.004/-.000)
Dimensions in [ ] may be substituted

at SDP option.
2
3
25 (1)
[19 (3/4)]
D1
5
6
7
8
9
10
11
12
13
14
15
16
METRIC COMPONENT
Catalog Number
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
P.D.
42
44
45
48
49
50
51
52
54
55
56
57
60
64
65
66
70
72
75
80
82
84
88
90
96
98
100
102
108
110
120
130
140
150
26.7
28
28.7
30.6
31.2
31.8
32.5
33.1
34.4
35
35.7
36.3
38.2
40.7
41.4
42
44.6
45.8
47.8
50.9
52.2
53.5
56
57.3
61.1
62.4
63.7
64.9
68.8
70
76.4
82.8
89.1
95.5
6A50M042GT18
6A50M044GT18
6A50M045GT18
6A50M048GT18
6A50M049GT18
6A50M050GT18
6A50M051GT18
6A50M052GT18
6A50M054GT18
6A50M055GT18
6A50M056GT18
6A50M057GT18
6A50M060GT20
6A50M064GT20
6A50M065GT20
6A50M066GT20
6A50M070GT20
6A50M072GT20
6A50M075GT20
6A50M080GT20
6A50M082GT20
6A50M084GT20
6A50M088GT20
6A50M090GT20
6A50M096GT20
6A50M098GT20
6A50M100GT20
6A50M102GT20
6A50M108GT20
6A50M110GT20
6A50M120GT20
6A50M130GT20
6A50M140GT20
6A50M150GT20
2-166
Metric
No.
of
Grooves
Inch
D
Dia.
26.2
27.5
28.1
30.1
30.7
31.3
32
32.6
33.9
34.5
35.1
35.8
37.7
40.2
40.9
41.5
44.1
45.3
47.2
50.4
51.7
53
55.5
56.8
60.6
61.9
63.2
64.4
68.3
69.5
75.9
82.3
88.6
95
P.D.
1.053
1.103
1.128
1.203
1.228
1.253
1.278
1.303
1.353
1.379
1.404
1.429
1.504
1.604
1.629
1.654
1.754
1.805
1.880
2.005
2.055
2.105
2.206
2.256
2.406
2.456
2.506
2.557
2.707
2.757
3.008
3.258
3.509
3.760
D
Dia.
1.033
1.083
1.108
1.183
1.208
1.233
1.258
1.283
1.333
1.359
1.384
1.409
1.484
1.584
1.609
1.634
1.734
1.785
1.860
1.985
2.035
2.085
2.186
2.236
2.386
2.436
2.486
2.537
2.687
2.737
2.988
3.238
3.489
3.740
D1
Shank
Dia.
Min. Usable
Length
12.7 (1/2)
12.7 (1/2)
12.7 (1/2)
12.7 (1/2)
12.7 (1/2)
12.7 (1/2)
12.7 (1/2)
12.7 (1/2)
12.7 (1/2)
12.7 (1/2)
12.7 (1/2)
12.7 (1/2)
12.7 (1/2)
12.7 (1/2)
12.7 (1/2)
12.7 (1/2)
12.7 (1/2)
12.7 (1/2)
12.7 (1/2)
19.1 (3/4)
19.1 (3/4)
19.1 (3/4)
19.1 (3/4)
19.1 (3/4)
19.1 (3/4)
19.1 (3/4)
19.1 (3/4)
19.1 (3/4)
19.1 (3/4)
19.1 (3/4)
19.1 (3/4)
19.1 (3/4)
19.1 (3/4)
19.1 (3/4)
175 (7)
175 (7)
175 (7)
175 (7)
175 (7)
175 (7)
175 (7)
175 (7)
175 (7)
175 (7)
175 (7)
175 (7)
200 (8)
200 (8)
200 (8)
200 (8)
200 (8)
200 (8)
200 (8)
200 (8)
200 (8)
200 (8)
200 (8)
200 (8)
200 (8)
200 (8)
200 (8)
200 (8)
200 (8)
200 (8)
200 (8)
200 (8)
200 (8)
200 (8)
GT2 TIMING BELT PULLEYS 2 mm PITCH

FAIRLOC HUB
DOUBLE OR NO FLANGE
PROFILE
R
Inch
MATERIAL:
Aluminum Alloy
FINISH:
T
1
Clear Anodized
SPECIFICATIONS:
O.D. Tolerance:
15 to 40 grooves is +.002/-.000
45 to 80 grooves is +.003/-.000
90 to 120 grooves is +.004/-.000

CAP SCREW
CAP SCREW
CAP SCREW
E
B
C
F.D. O.D.
.29
Fig. 1
A
A
A
Fig. 2
A
A
A
A
A
A
A
A
A
A
A
A
A
Fig. 3
A
A
A
A
A
A
F.D. O.D.
O.D. B
.29
Fig. 1
Fig. 2
No.
of
Grooves
P.D.
6D51-015DF0606
6D51-016DF0606
6D51-018DF0606
15
16
18
.376
.401
.451
.356
.381
.431
.555
.580
.625
6D51-020DF0606
6D51-022DF0606
6D51-024DF0608
6D51-025DF0608
6D51-028DF0608
6D51-030DF0608
6D51-032DF0608
6D51-036DF0608
6D51-040DF0608
6D51-045DF0608
6D51-048DF0608
6D51-050DF0608
6D51-060DF0608
20
22
24
25
28
30
32
36
40
45
48
50
60
.501
.551
.602
.627
.702
.752
.802
.902
1.003
1.128
1.203
1.253
1.504
.481
.531
.582
.607
.682
.732
.782
.882
.983
1.108
1.183
1.233
1.484
6D51-060NF0608
6D51-072NF0608
6D51-080NF0610
6D51-090NF0610
6D51-100NF0610
6D51-120NF0612
60
72
80
90
100
120
1.504
1.805
2.005
2.256
2.506
3.008
1.484
1.785
1.985
2.236
2.486
2.988
Catalog Number
INCH COMPONENT
3/8
O.D.
B
Bore
Fig. 3
E
Length
C
Hub
Dia.
1/64
1/64
D
Hub
Proj.
.1875
.1875
.1875
9/16
9/16
9/16
.580
.580
.625
15/64
15/64
15/64
#2-56
#2-56
#2-56
.685
.740
.790
.815
.895
.945
1.000
1.105
1.210
1.340
1.420
1.470
1.730
.1875
.1875
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
9/16
9/16
11/16
11/16
11/16
11/16
11/16
11/16
23/32
23/32
23/32
23/32
23/32
.625
.625
.625
.625
.625
.625
.625
.625
.625
.625
.625
.625
.625
15/64
15/64
19/64
19/64
19/64
19/64
19/64
19/64
5/16
5/16
5/16
5/16
5/16
#2-56
#2-56
#4-40
#4-40
#4-40
#4-40
#4-40
#4-40
#4-40
#4-40
#4-40
#4-40
#4-40
.250
.250
.3125
.3125
.3125
.375
3/4
3/4
3/4
3/4
3/4
3/4
.750
.750
1.000
1.000
1.000
1.000
3/8
3/8
3/8
3/8
3/8
3/8
#4-40
#4-40
#6-32
#6-32
#6-32
#6-32
F.D.
1/64
+.001
-.000
Cap
Screw
8
9
2-167
10
11
12
13
14
15
16
I
R
T


DOUBLE FLANGE
PROFILE
Inch
MATERIAL:
Aluminum Alloy
FINISH:
Clear Anodized
SPECIFICATIONS:
2
3
O.D. Tolerance:
12 to 40 grooves is +.002/-.000
42 to 60 grooves is +.003/-.000
Pulleys with 12 to 16 grooves have 1
set screw; others have 2 set screws at 90.
SET
SCREW
D
S
D
S
.16
C B
O.D. F.D.
B C
F.D. O.D.
4
5
.16
7
8
9
10
11
12
13
14
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
6A51-012DF0304
6A51-013DF0304
6A51-014DF0304
6A51-015DF0306
6A51-016DF0306
6A51-017DF0306
6A51-017DF0308
6A51-018DF0306
6A51-018DF0308
6A51-019DF0306
6A51-019DF0308
6A51-020DF0306
6A51-020DF0308
6A51-021DF0306
6A51-021DF0308
6A51-022DF0306
6A51-022DF0308
6A51-024DF0308
6A51-025DF0308
6A51-026DF0308
6A51-028DF0308
6A51-030DF0308
6A51-032DF0308
6A51-036DF0308
6A51-040DF0308
6A51-042DF0308
6A51-044DF0308
6A51-045DF0308
6A51-048DF0308
6A51-050DF0308
6A51-056DF0308
6A51-060DF0308
15
16
Fig. 1
INCH COMPONENT
Catalog Number
SET
SCREW
2-168
Fig.
No.
1
1
1
1
1
2
1
2
1
2
1
2
1
2
1
2
1
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
Fig. 2
C
B
D
No.
E
F.D.
W
Hub Hub
P.D. O.D. 1/64 Bore
of
Lgth.
+.001 Body
Dia. Proj.
Grooves
1/64
-.000
1/64
12
13
14
15
16
17
17
18
18
19
19
20
20
21
21
22
22
24
25
26
28
30
32
36
40
42
44
45
48
50
56
60
.301
.326
.351
.376
.401
.426
.426
.451
.451
.476
.476
.501
.501
.526
.526
.551
.551
.602
.627
.652
.702
.752
.802
.902
1.003
1.053
1.103
1.128
1.203
1.253
1.404
1.504
.281
.306
.331
.356
.381
.406
.406
.431
.431
.456
.456
.481
.481
.506
.506
.531
.531
.582
.607
.632
.682
.732
.782
.882
.983
1.033
1.083
1.108
1.183
1.233
1.384
1.484
.480
.505
.530
.555
.580
.635
.635
.635
.635
.635
.635
.685
.685
.710
.710
.740
.740
.790
.815
.840
.895
.945
1.000
1.105
1.210
1.260
1.315
1.340
1.420
1.470
1.575
1.730
.125
.125
.125
.1875
.1875
.1875
.250
.1875
.250
.1875
.250
.1875
.250
.1875
.250
.1875
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
.260
.260
.260
.260
.260
.260
.260
.260
.260
.260
.260
.260
.260
.276
.276
.276
.276
.276
.276
.276
.276
7/16
7/16
7/16
7/16
7/16
31/64
7/16
31/64
7/16
31/64
7/16
31/64
7/16
31/64
7/16
31/64
7/16
33/64
33/64
33/64
33/64
33/64
33/64
33/64
17/32
17/32
17/32
17/32
17/32
17/32
17/32
17/32
.480
.505
.530
.555
.580
.312
.635
.312
.635
.312
.635
.364
.685
.390
.710
.390
.740
.442
.468
.490
.494
.546
.598
.676
.754
.806
.858
.900
.936
.936
1.030
1.222
15/64
15/64
15/64
15/64
15/64
7/32
15/64
7/32
15/64
7/32
15/64
7/32
15/64
7/32
15/64
7/32
15/64
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
Set
Screw
7/64
7/64
7/64
7/64
7/64
7/64
7/64
7/64
7/64
7/64
7/64
7/64
7/64
7/64
7/64
7/64
7/64
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
#4-40
#4-40
#4-40
#6-40
#6-40
#4-40
#6-40
#4-40
#6-40
#4-40
#6-40
#4-40
#6-40
#4-40
#6-40
#4-40
#6-40
#6-40
#6-40
#6-40
#6-40
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32


DOUBLE OR NO FLANGE
PROFILE
R
Inch
MATERIAL:
Aluminum Alloy
FINISH:
Clear Anodized
SET
SCREW
D
S
SPECIFICATIONS:
O.D. Tolerance:
12 to 40 grooves is +.002/-.000
42 to 80 grooves is +.003/-.000
90 to 120 grooves is +.004/-.000 C B
O.D. F.D.

2 set screws at 90.
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
6A51-012DF0604
6A51-013DF0604
6A51-014DF0604
6A51-015DF0606
6A51-016DF0606
6A51-017DF0606
6A51-017DF0608
6A51-018DF0606
6A51-018DF0608
6A51-019DF0606
6A51-019DF0608
6A51-020DF0606
6A51-020DF0608
6A51-021DF0606
6A51-021DF0608
6A51-022DF0606
6A51-022DF0608
6A51-024DF0608
6A51-025DF0608
6A51-026DF0608
6A51-028DF0608
6A51-030DF0608
6A51-032DF0608
6A51-036DF0608
6A51-040DF0608
6A51-042DF0608
6A51-044DF0608
6A51-045DF0608
6A51-048DF0608
6A51-050DF0608
6A51-056DF0608
6A51-060DF0608
6A51-060NF0608
6A51-062NF0608
6A51-068NF0608
6A51-072NF0608
6A51-074NF0608
6A51-080NF0610
6A51-090NF0610
6A51-100NF0610
6A51-120NF0612
F.D. O.D.
Fig. 1
No.
Fig.
P.D.
of
No. Grooves
1
1
1
1
1
2
1
2
1
2
1
2
1
2
1
2
1
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
3
3
3
3
3
3
3
3
3
12
13
14
15
16
17
17
18
18
19
19
20
20
21
21
22
22
24
25
26
28
30
32
36
40
42
44
45
48
50
56
60
60
62
68
72
74
80
90
100
120
.301
.326
.351
.376
.401
.426
.426
.451
.451
.476
.476
.501
.501
.526
.526
.551
.551
.602
.627
.652
.702
.752
.802
.902
1.003
1.053
1.103
1.128
1.203
1.253
1.404
1.504
1.504
1.554
1.704
1.805
1.855
2.005
2.256
2.506
3.008
.38
B C
.480
.505
.530
.555
.580
.635
.635
.635
.635
.635
.635
.685
.685
.710
.710
.740
.740
.790
.815
.840
.895
.945
1.000
1.105
1.210
1.260
1.315
1.340
1.420
1.470
1.575
1.730
2
B C
Fig. 3
B
Bore
.125
.125
.125
.1875
.1875
.250
.1875
.250
.1875
.250
.1875
.250
.1875
.250
.1875
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
.3125
.3125
.3125
.375
SET
SCREW
C
D
E
Hub
W
O.D. 1/64 +.001 Body Length Dia. Hub
Proj.
1/64
-.000
.281
.306
.331
.356
.381
.406
.406
.431
.431
.456
.456
.581
.581
.506
.506
.531
.531
.582
.607
.632
.682
.732
.782
.882
.983
1.033
1.083
1.108
1.183
1.233
1.384
1.484
1.484
1.534
1.684
1.785
1.835
1.985
2.236
2.486
2.988
.389
.389
.389
.389
.389
.389
.389
.389
.389
.389
.389
.389
.389
.389
.389
.405
.405
.405
.405
.405
.405
.405
.405
9/16
9/16
9/16
9/16
9/16
5/8
9/16
5/8
9/16
5/8
9/16
5/8
9/16
5/8
9/16
5/8
9/16
11/16
11/16
11/16
11/16
11/16
11/16
11/16
23/32
23/32
23/32
23/32
23/32
23/32
23/32
23/32
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
1/64
.480
.505
.530
.555
.580
.312
.635
.312
.635
.338
.635
.364
.685
.390
.710
.390
.740
.442
.468
.490
.494
.546
.598
.676
.754
.806
.858
.900
.936
.936
1.030
1.222
1.148
1.148
1.195
1.195
1.215
1.500
1.500
1.500
1.500
15/64
15/64
15/64
15/64
15/64
15/64
15/64
15/64
15/64
15/64
15/64
15/64
15/64
15/64
15/64
15/64
15/64
19/64
19/64
19/64
19/64
19/64
19/64
19/64
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
T
1
O.D.
Fig. 2
F.D.
SET
SCREW
.29
INCH COMPONENT
Catalog Number
D
S
E
.29
Set
Screw
7/64 #4-40
7/64 #4-40
7/64 #4-40
7/64 #6-40
7/64 #6-40
7/64 #4-40
7/64 #6-40
7/64 #4-40
7/64 #6-40
7/64 #4-40
7/64 #6-40
7/64 #4-40
7/64 #6-40
7/64 #4-40
7/64 #6-40
7/64 #4-40
7/64 #6-40
5/32 #6-40
5/32 #6-40
5/32 #6-40
5/32 #6-40
5/32 #8-32
5/32 #8-32
5/32 #8-32
5/32 #8-32
5/32 #8-32
5/32 #8-32
5/32 #8-32
5/32 #8-32
5/32 #8-32
5/32 #8-32
5/32 #8-32
3/16 #8-32
3/16 #8-32
3/16 #8-32
3/16 #8-32
3/16 #8-32
3/16 #8-32
3/16 #8-32
3/16 #8-32
3/16 #10-32
2-169
3
4
5
6
7
8
9
10
11
12
13
14
15
16
I
R
T


DOUBLE OR NO FLANGE
PROFILE
Inch
MATERIAL:
Aluminum Alloy
FINISH:
Clear Anodized
SET
SCREW
D
S
SPECIFICATIONS:
2
3
4
O.D. Tolerance:
12 to 40 grooves is +.002/-.000
42 to 80 grooves is +.003/-.000
90 to 120 grooves is +.004/-.000 C B
2 set screws at 90.
INCH COMPONENT
Catalog Number
5
6
7
8
9
10
11
12
13
14
15
16
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
6A51-012DF0904
6A51-013DF0904
6A51-014DF0904
6A51-015DF0906
6A51-016DF0906
6A51-017DF0906
6A51-017DF0908
6A51-018DF0906
6A51-018DF0908
6A51-019DF0906
6A51-019DF0908
6A51-020DF0906
6A51-020DF0908
6A51-021DF0906
6A51-021DF0908
6A51-022DF0906
6A51-022DF0908
6A51-024DF0908
6A51-025DF0908
6A51-026DF0908
6A51-028DF0908
6A51-030DF0908
6A51-032DF0908
6A51-036DF0908
6A51-040DF0908
6A51-042DF0908
6A51-044DF0908
6A51-045DF0908
6A51-048DF0908
6A51-050DF0908
6A51-056DF0908
6A51-060DF0908
6A51-060NF0908
6A51-062NF0908
6A51-068NF0908
6A51-072NF0908
6A51-074NF0908
6A51-080NF0910
6A51-090NF0910
6A51-100NF0910
6A51-120NF0912
2-170
E
W
E
.41
O.D. F.D.
F.D. O.D.
1
1
1
1
1
2
1
2
1
2
1
2
1
2
1
2
1
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
3
3
3
3
3
3
3
3
3
No.
P.D.
of
Grooves
12
13
14
15
16
17
17
18
18
19
19
20
20
21
21
22
22
24
25
26
28
30
32
36
40
42
44
45
48
50
56
60
60
62
68
72
74
80
90
100
120
.301
.326
.351
.376
.401
.426
.426
.451
.451
.476
.476
.501
.501
.526
.526
.551
.551
.602
.627
.652
.702
.752
.802
.902
1.003
1.053
1.103
1.128
1.203
1.253
1.404
1.504
1.504
1.554
1.704
1.805
1.855
2.005
2.256
2.506
3.008
.500
B C
B C
Fig. 3
C
D
E
F.D.
W
Hub
O.D. 1/64 +.001 Body Lgth. Dia. Hub
Proj.
1/64
-.000
.125
.125
.125
.1875
.1875
.1875
.250
.1875
.250
.1875
.250
.1875
.250
.1875
.250
.1875
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
.3125
.3125
.3125
.375
SET
SCREW
Fig. 2
.480
.505
.530
.555
.580
.635
.635
.635
.635
.635
.635
.685
.685
.710
.710
.740
.740
.790
.815
.840
.895
.945
1.000
1.105
1.210
1.260
1.315
1.340
1.420
1.470
1.575
1.730
O.D.
B
Bore
.281
.306
.331
.356
.381
.406
.406
.431
.431
.456
.456
.481
.481
.506
.506
.531
.531
.582
.607
.632
.682
.732
.782
.882
.983
1.033
1.083
1.108
1.183
1.233
1.384
1.484
1.484
1.534
1.684
1.785
1.835
1.985
2.236
2.486
2.988
SET
SCREW
.41
Fig. 1
Fig.
No.
D
S
.514
.514
.514
.514
.514
.514
.514
.514
.514
.514
.514
.514
.514
.530
.530
.530
.530
.530
.530
.530
.530
11/16
11/16
11/16
11/16
11/16
3/4
11/16
3/4
11/16
3/4
11/16
3/4
11/16
3/4
11/16
3/4
11/16
13/16
13/16
13/16
13/16
13/16
13/16
13/16
27/32
27/32
27/32
27/32
27/32
27/32
27/32
27/32
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
1/64
.480
.505
.530
.555
.580
.312
.635
.312
.635
.338
.635
.364
.685
.390
.710
.390
.740
.442
.468
.490
.494
.546
.598
.676
.754
.806
.858
.900
.936
.936
1.030
1.222
1.148
1.148
1.195
1.195
1.215
1.500
1.500
1.500
1.500
15/64
15/64
15/64
15/64
15/64
15/64
15/64
15/64
15/64
15/64
15/64
15/64
15/64
15/64
15/64
15/64
15/64
19/64
19/64
19/64
19/64
19/64
19/64
19/64
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
Set
Screw
7/64 #4-40
7/64 #4-40
7/64 #4-40
7/64 #6-40
7/64 #6-40
7/64 #4-40
7/64 #6-40
7/64 #4-40
7/64 #6-40
7/64 #4-40
7/64 #6-40
7/64 #4-40
7/64 #6-40
7/64 #4-40
7/64 #6-40
7/64 #4-40
7/64 #6-40
5/32 #6-40
5/32 #6-40
5/32 #6-40
5/32 #6-40
5/32 #8-32
5/32 #8-32
5/32 #8-32
5/32 #8-32
5/32 #8-32
5/32 #8-32
5/32 #8-32
5/32 #8-32
5/32 #8-32
5/32 #8-32
5/32 #8-32
3/16 #8-32
3/16 #8-32
3/16 #8-32
3/16 #8-32
3/16 #8-32
3/16 #8-32
3/16 #8-32
3/16 #8-32
5/32 #10-32


MOLDED WITH INSERT
DOUBLE FLANGE
PROFILE
R
Inch
MATERIAL:

T
1
SPECIFICATIONS:
Pulleys with:
11/16

.1875
#4-40
.250
#6-32
.3125
#8-32
5/32
Pulleys with 36 & 40 grooves

do not have webs.
F.D. O.D.
11/64
.090 WEB
9/64
SET SCREW
B
2
3
11/16
7/16
SPOT DRILL
1/4
1/16 (TYP)
4
5
5/16
INCH COMPONENT
Catalog Number
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
6Z51-036DF0606
6Z51-036DF0608
6Z51-036DF0610
6Z51-040DF0606
6Z51-040DF0608
6Z51-040DF0610
6Z51-042DF0606
6Z51-042DF0608
6Z51-042DF0610
6Z51-044DF0606
6Z51-044DF0608
6Z51-044DF0610
6Z51-048DF0606
6Z51-048DF0608
6Z51-048DF0610
6Z51-060DF0608
6Z51-060DF0610
6Z51-065DF0608
6Z51-065DF0610
6Z51-072DF0608
6Z51-072DF0610
6Z51-080DF0608
6Z51-080DF0610
6Z51-090DF0608
6Z51-090DF0610
6Z51-100DF0608
6Z51-100DF0610
6Z51-110DF0608
6Z51-110DF0610
6Z51-120DF0608
6Z51-120DF0610
6Z51-130DF0608
6Z51-130DF0610
No.
of
Grooves
P.D.
O.D.
F.D.
36
36
36
40
40
40
42
42
42
44
44
44
48
48
48
60
60
65
65
72
72
80
80
90
90
100
100
110
110
120
120
130
130
.902
.902
.902
1.003
1.003
1.003
1.053
1.053
1.053
1.103
1.103
1.103
1.203
1.203
1.203
1.504
1.504
1.629
1.629
1.805
1.805
2.005
2.005
2.256
2.256
2.506
2.506
2.757
2.757
3.008
3.008
3.258
3.258
.882
.882
.882
.983
.983
.983
1.033
1.033
1.033
1.083
1.083
1.083
1.183
1.183
1.183
1.484
1.484
1.609
1.609
1.785
1.785
1.985
1.985
2.236
2.236
2.486
2.486
2.737
2.737
2.988
2.988
3.238
3.238
1.09
1.09
1.09
1.19
1.19
1.19
1.24
1.24
1.24
1.29
1.29
1.29
1.39
1.39
1.39
1.70
1.70
1.82
1.82
2.00
2.00
2.21
2.21
2.46
2.46
2.71
2.71
2.97
2.97
3.22
3.22
3.48
3.48
B
Bore
+.001
-.000
.1875
.250
.3125
.1875
.250
.3125
.1875
.250
.3125
.1875
.250
.3125
.1875
.250
.3125
.250
.3125
.250
.3125
.250
.3125
.250
.3125
.250
.3125
.250
.3125
.250
.3125
.250
.3125
.250
.3125
2-171
6
7
8
9
10
11
12
13
14
15
16
I
R
T
1

MOLDED
DOUBLE FLANGE
PROFILE
Inch
MATERIAL:
SPECIFICATION:
MODIFICATIONS:
Available with set screws or pinning holes

on special order.
Single flange and special modifications
available on special request.
3
11/16
1/4
4
F.D. O.D.
B C
.090 WEB
6
7
8
9
10
11
12
13
14
15
16
5/16
1/16 TYP
INCH COMPONENT
Catalog Number
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
6L51-012DF0604
6L51-013DF0604
6L51-014DF0604
6L51-015DF0604
6L51-016DF0604
6L51-018DF0606
6L51-020DF0606
6L51-021DF0606
6L51-022DF0606
6L51-024DF0606
6L51-028DF0608
6L51-030DF0608
6L51-032DF0608
6L51-036DF0608
6L51-040DF0608
6L51-042DF0608
6L51-044DF0608
6L51-048DF0608
6L51-060DF0608
6L51-065DF0610
6L51-072DF0610
6L51-080DF0610
6L51-090DF0610
6L51-100DF0610
6L51-110DF0610
6L51-120DF0610
6L51-130DF0610
2-172
No.
of
Grooves
P.D.
O.D.
F.D.
12
13
14
15
16
18
20
21
22
24
28
30
32
36
40
42
44
48
60
65
72
80
90
100
110
120
130
.301
.326
.351
.376
.401
.451
.501
.526
.551
.602
.702
.752
.802
.902
1.003
1.053
1.103
1.203
1.504
1.629
1.805
2.005
2.256
2.506
2.757
3.008
3.258
.281
.306
.331
.356
.381
.431
.481
.506
.531
.582
.682
.732
.782
.882
.983
1.033
1.083
1.183
1.484
1.609
1.785
1.985
2.236
2.486
2.737
2.988
3.238
.47
.51
.53
.55
.58
.63
.68
.70
.73
.78
.88
.93
.98
1.09
1.19
1.24
1.29
1.39
1.70
1.82
2.00
2.21
2.46
2.71
2.97
3.22
3.48
B
Bore
+.001
-.000
.125
.125
.125
.125
.125
.1875
.1875
.1875
.1875
.1875
.250
.250
.250
.250
.250
.250
.250
.250
.250
.3125
.3125
.3125
.3125
.3125
.3125
.3125
.3125
C
Hub
Dia.
7/16
7/16
7/16
7/16
7/16
1/2
1/2
1/2
1/2
1/2
11/16
11/16
11/16
11/16
11/16
11/16
11/16
11/16
11/16
11/16
11/16
11/16
11/16
11/16
11/16
11/16
11/16

MOLDED
SINGLE FLANGE
PROFILE
R
Inch
MATERIAL:
SPECIFICATION:
T
1
MODIFICATIONS:
Available with set screws or pinning holes

on special order.
Other modifications available on special request.
2
3
11/16 1/64
.090 WEB
1/4
F.D.
O.D.
6
1/16 TYP
5/16
INCH COMPONENT
Catalog Number
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
6L51-012SF0604
6L51-013SF0604
6L51-014SF0604
6L51-015SF0604
6L51-016SF0604
6L51-018SF0606
6L51-020SF0606
6L51-021SF0606
6L51-022SF0606
6L51-024SF0606
6L51-028SF0608
6L51-030SF0608
6L51-032SF0608
6L51-036SF0608
6L51-040SF0608
6L51-042SF0608
6L51-044SF0608
6L51-048SF0608
6L51-060SF0608
6L51-065SF0610
6L51-072SF0610
6L51-080SF0610
6L51-090SF0610
6L51-100SF0610
6L51-110SF0610
6L51-120SF0610
6L51-130SF0610
No.
of
Grooves
P.D.
O.D.
F.D.
12
13
14
15
16
18
20
21
22
24
28
30
32
36
40
42
44
48
60
65
72
80
90
100
110
120
130
.301
.326
.351
.376
.401
.451
.501
.526
.551
.602
.702
.752
.802
.902
1.003
1.053
1.103
1.203
1.504
1.629
1.805
2.005
2.256
2.506
2.757
3.008
3.258
.281
.306
.331
.356
.381
.431
.481
.506
.531
.582
.682
.732
.782
.882
.983
1.033
1.083
1.183
1.484
1.609
1.785
1.985
2.236
2.486
2.737
2.988
3.238
.47
.51
.53
.55
.58
.63
.68
.70
.73
.78
.88
.93
.98
1.09
1.19
1.24
1.29
1.39
1.70
1.82
2.00
2.21
2.46
2.71
2.97
3.22
3.48
B
Bore
+.001
-.000
.125
.125
.125
.125
.125
.1875
.1875
.1875
.1875
.1875
.250
.250
.250
.250
.250
.250
.250
.250
.250
.3125
.3125
.3125
.3125
.3125
.3125
.3125
.3125
7
C
Hub
Dia.
7/16
7/16
7/16
7/16
7/16
1/2
1/2
1/2
1/2
1/2
11/16
11/16
11/16
11/16
11/16
11/16
11/16
11/16
11/16
11/16
11/16
11/16
11/16
11/16
11/16
11/16
11/16
2-173
8
9
10
11
12
13
14
15
16
R
T
1
2
CLEAN RUNNING

Long life.
Low noise levels.
Inch
PROTECTION
3
4
5
6
7
8

-40F to +220F (-40C to +104C)
STRENGTH

High flex life.
RoHS COMPLIANT
APPLICATIONS:
Medical Equipment
Office Equipment
AVAILABLE IN:
MXL
XL
L
GT2 2, 3 and 5 mm
and other pitches
Fiberglass
Tensile
Cords
10
11
12
13
14
15
16
Nylon
Tooth
Facing
2-174

BELT WIDTHS
METRIC - 6 & 9 mm
NON-MARKING
LOW DUST
RoHS COMPLIANT
PowerGrip TruMotion
Metric
Inch
101
R
T
MATERIAL:

SPECIFICATIONS:
Breaking Strength:
Working Tension:
Temperature Range:
-40C to +104C (-40F to +220F)
2
3
3
(.118)
MODIFICATIONS:

1.14
(.045)
2.41
(.095)
5
METRIC COMPONENT
CATALOG NUMBER
A26R53M
No. of
Grooves
Code
Belt Width
mm
6 (.236)
9 (.354)
15 (.591)
Width
Code
060
090
150
Groove
Code
033
037
041
043
045
050
053
060
061
063
067
070
073
075
080
081
084
085
089
094
097
100
113
116
119
120
125
130
Pitch Length
mm
Inch
Groove
Code
99
111
123
129
135
150
159
180
183
189
201
210
219
225
240
243
252
255
267
282
291
300
339
348
357
360
375
390
3.898
4.370
4.843
5.079
5.315
5.906
6.260
7.087
7.205
7.441
7.914
8.268
8.622
8.858
9.449
9.567
9.921
10.039
10.512
11.102
11.457
11.811
13.346
13.700
14.055
14.173
14.764
15.354
131
138
140
148
149
158
160
161
163
168
170
179
184
188
200
210
228
232
245
250
262
280
315
350
360
424
512
687
Pitch Length
mm
Inch
393
414
420
444
447
474
480
483
489
504
510
537
552
564
600
630
684
696
735
750
786
840
945
1050
1080
1272
1536
2061
15.472
16.299
16.535
17.480
17.598
18.661
18.898
19.016
19.252
19.843
20.079
21.142
21.732
22.205
23.622
24.803
26.929
27.402
28.937
29.527
30.945
33.071
37.205
41.338
42.520
50.079
60.472
81.142
6
7
8
9
10
11
12
13
14
15
2-175
16
I
R
T

BELT WIDTHS
METRIC - 6, 9 & 15 mm
PROFILE
Metric
Inch
MATERIAL:
101
SPECIFICATIONS:
1
2
3
4
Breaking Strength:
Working Tension:
Temperature Range:
-34C to +85C (-30F to +185F)
3
(.118)
MODIFICATIONS:
2.41
(.095)

5
6
7
8
9
METRIC COMPONENT
CATALOG NUMBER
A 6R53M
No. of
Grooves
Code
Belt Width
mm
6 (.236)
9 (.354)
15 (.591)
10
11
12
13
14
Width
Code
060
090
150
Groove
Code
033
035
037
040
041
043
045
048
050
053
054
055
058
059
060
061
062
063
064
065
066
067
068
070
072
073
075
Pitch Length
mm
Inch
Groove
Code
99
105
111
120
123
129
135
144
150
159
162
165
174
177
180
183
186
189
192
195
198
201
204
210
216
219
225
3.898
4.134
4.370
4.724
4.843
5.079
5.315
5.669
5.906
6.260
6.378
6.496
6.850
6.969
7.087
7.205
7.323
7.441
7.559
7.677
7.795
7.914
8.031
8.268
8.504
8.622
8.858
077
078
080
081
082
084
085
089
090
092
094
095
096
097
098
100
101
103
104
108
110
113
116
118
119
120
121
Pitch Length
mm
Inch
231
234
240
243
246
252
255
267
270
276
282
285
288
291
294
300
303
309
312
324
330
339
348
354
357
360
363
9.094
9.213
9.449
9.567
9.685
9.921
10.039
10.512
10.630
10.866
11.102
11.220
11.339
11.457
11.575
11.811
11.929
12.165
12.283
12.756
12.992
13.346
13.700
13.937
15.055
14.173
14.291
15
16
1.14
(.045)
2-176

Metric
Inch
101
R
T
1
METRIC COMPONENT
CATALOG NUMBER
A 6R53M
No. of
Grooves
Code
Belt Width
mm
6 (.236)
9 (.354)
15 (.591)
Width
Code
060
090
150
Groove
Code
125
128
129
130
131
133
136
138
140
148
149
150
152
158
160
161
163
165
167
168
170
171
174
179
180
184
187
Pitch Length
mm
Inch
Groove
Code
375
384
387
390
393
399
408
414
420
444
447
450
456
474
480
483
489
495
501
504
510
513
522
537
540
552
561
14.764
15.118
15.236
15.354
15.472
15.709
16.063
16.299
16.535
17.480
17.598
17.716
17.953
18.661
18.898
19.016
19.252
19.488
19.724
19.843
20.079
20.197
20.551
21.142
21.260
21.732
22.087
188
190
194
196
200
207
210
219
228
232
245
250
262
280
283
299
308
315
350
360
424
512
529
555
564
687
820
Pitch Length
mm
Inch
564
570
582
588
600
621
630
657
684
696
735
750
786
840
849
897
924
945
1050
1080
1272
1536
1587
1665
1692
2061
2460
22.205
22.441
22.913
23.150
23.622
24.449
24.803
25.866
26.929
27.402
28.937
29.527
30.945
33.071
33.425
35.315
36.378
37.205
41.338
42.520
50.079
60.472
62.480
65.551
66.614
81.142
96.850
2
3
4
5
6
7
8
9
10
11
12
13
14
15
2-177
16
I
R
T
GT2 DOUBLE-SIDED TIMING BELTS 3 mm PITCH

BELT WIDTHS
METRIC - 6, 9 & 15 mm
PROFILE
Metric
Inch
MATERIAL:
101
SPECIFICATIONS:
1
2
3
Breaking Strength:
Working Tension:
Temperature Range:
-34C to +85C (-30F to +185F)
3
(.118)
MODIFICATIONS:
3.2
(.126)

0.76
(.030)

or inch standards.
5
6
METRIC COMPONENT
CATALOG NUMBER
A6R53MD
No. of
Grooves
Code
Belt Width
mm
6 (.236)
9 (.354)
15 (.591)
8
9
10
11
12
13
124
125
127
128
129
130
131
132
133
135
137
138
139
140
142
144
145
146
148
149
153
155
156
157
158
160
161
162
Pitch Length
mm
Inch
Groove
Code
372
375
381
384
387
390
393
396
399
405
411
414
417
420
426
432
435
438
444
447
459
465
468
471
474
480
483
486
14.646
14.764
15.000
15.118
15.236
15.354
15.472
15.591
15.709
15.945
16.181
16.299
16.417
16.535
16.772
17.008
17.126
17.244
17.480
17.598
18.071
18.307
18.425
18.543
18.661
18.898
19.016
19.134
163
164
167
168
170
171
173
175
176
177
179
184
186
188
190
192
195
197
199
200
202
203
204
209
210
211
213
215
Pitch Length
mm
Inch
489
492
501
504
510
513
519
525
528
531
537
552
558
564
570
576
585
591
597
600
606
609
612
627
630
633
639
645
19.252
19.370
19.724
19.842
20.079
20.197
20.433
20.669
20.787
20.905
21.142
21.732
21.968
22.205
22.441
22.677
23.031
23.268
23.504
23.622
23.858
23.976
24.094
24.685
24.803
24.921
25.157
25.394
14
15
16
Width
Code
060
090
150
Groove
Code
2-178

Metric
Inch
101
R
T
1
METRIC COMPONENT
CATALOG NUMBER
A6R53MD
No. of
Grooves
Code
Belt Width
mm
6 (.236)
9 (.354)
15 (.591)
Width
Code
060
090
150
Groove
Code
216
218
219
221
223
228
229
232
237
245
246
250
251
262
265
274
279
280
281
291
294
297
300
305
315
317
327
Pitch Length
mm
Inch
648
654
657
663
669
684
687
696
711
735
738
750
753
786
795
822
837
840
843
873
882
891
900
915
945
951
981
25.512
25.748
25.866
26.102
26.339
26.929
27.047
27.402
27.992
28.937
29.055
29.528
29.646
30.945
31.299
32.362
32.953
33.071
33.189
34.370
34.724
35.079
35.433
36.024
37.205
37.441
38.622
Groove
Code
334
342
345
350
352
354
360
375
385
397
421
445
500
504
512
529
652
668
687
Pitch Length
mm
Inch
1002
1026
1035
1050
1056
1062
1080
1125
1155
1191
1263
1335
1500
1512
1536
1587
1956
2004
2061
39.449
40.394
40.748
41.339
41.575
41.811
42.520
44.291
45.472
46.890
49.724
52.559
59.055
59.527
60.472
62.480
77.008
78.897
81.142
2
3
4
5
6
7
8
9
10
11
12
13
14
15
2-179
16
GT 2 PULLEY FLANGES 3 mm PITCH

PROFILE
MATERIAL:
Metric
Inch
Aluminum Alloy
SPECIFICATION:
101
1
2
4
METRIC COMPONENT
5
6
7
8
9
10
11
12
Catalog Number
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
6A52M010FA
6A52M011FA
6A52M012FA
6A52M013FA
6A52M014FA
6A52M015FA
6A52M016FA
6A52M017FA
6A52M018FA
6A52M019FA
6A52M020FA
6A52M022FA
6A52M024FA
6A52M025FA
6A52M026FA
6A52M028FA
6A52M030FA
6A52M032FA
6A52M034FA
6A52M036FA
6A52M038FA
6A52M040FA
6A52M044FA
13
14
15
16
Pulley
Grooves
(Ref.)
2-180
10
11
12
13
14
15
16
17
18
19
20
22
24
25
26
28
30
32
34
36
38
40
44
Metric
d
Dia.
0.08
6.2
6.86
8.18
8.89
9.5
10.82
11.48
11.48
12.8
13.46
14.58
15.9
17.88
18.75
19.66
21.56
23.47
25.38
27.28
29.18
31.12
33.02
36.83
Inch
D
Dia.
0.4
12.8
13.5
14.7
15.5
16.1
17.4
18
18.8
20
20.7
22.7
24
26
26.9
28.1
29.8
31.8
33.6
35.5
37.4
39.4
41.3
45.1
d
Dia.
.003
.244
.270
.322
.350
.374
.426
.452
.452
.504
.530
.574
.626
.704
.738
.774
.849
.924
.999
1.074
1.149
1.225
1.300
1.450
D
Dia.
.015
.505
.530
.580
.610
.635
.685
.710
.740
.790
.815
.895
.945
1.025
1.060
1.105
1.173
1.250
1.323
1.398
1.473
1.549
1.625
1.775
H
Width
Thickness
0.25
( .01)
1.14 (.045) 0.64 (.025)
1.14 (.045) 0.64 (.025)
1.14 (.045) 0.64 (.025)
1.32 (.052) 0.81 (.032)
1.32 (.052) 0.81 (.032)
1.32 (.052) 0.81 (.032)
1.32 (.052) 0.81 (.032)
1.32 (.052) 0.81 (.032)
1.32 (.052) 0.81 (.032)
1.32 (.052) 0.81 (.032)
1.32 (.052) 0.81 (.032)
1.32 (.052) 0.81 (.032)
1.32 (.052) 0.81 (.032)
1.32 (.052) 0.81 (.032)
1.32 (.052) 0.81 (.032)
1.32 (.052) 0.81 (.032)
1.32 (.052) 0.81 (.032)
1.32 (.052) 0.81 (.032)
1.52 (.060) 1.02 (.040)
1.52 (.060) 1.02 (.040)
1.52 (.060) 1.02 (.040)
1.52 (.060) 1.02 (.040)
1.52 (.060) 1.02 (.040)

PROFILE
MATERIAL:
Metric
Inch
Aluminum Alloy
SPECIFICATIONS:
101
D Tolerance:
9 to 27 grooves is +0.05/0 (+.002/-.000)
28 to 35 grooves is +0.08/0 (+.003/-.000)
R
T
1
L1
D1
4
METRIC COMPONENT
Catalog Number
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
6A52M009GT08
6A52M010GT08
6A52M011GT08
6A52M012GT10
6A52M013GT10
6A52M014GT10
6A52M015GT10
6A52M016GT13
6A52M017GT13
6A52M018GT13
6A52M019GT13
6A52M020GT15
6A52M021GT15
6A52M022GT15
6A52M023GT15
6A52M024GT15
6A52M025GT15
6A52M026GT15
6A52M027GT15
6A52M028GT15
6A52M029GT15
6A52M030GT18
6A52M031GT18
6A52M032GT18
6A52M033GT18
6A52M034GT18
6A52M035GT18
Metric
No.
of
Grooves
P.D.
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
8.6
9.5
10.5
11.5
12.4
13.4
14.3
15.3
16.2
17.2
18.1
19.1
20.1
21
22
22.9
23.9
24.8
25.8
26.7
27.7
28.6
29.6
30.6
31.5
32.5
33.4
D
Dia.
7.83
8.79
9.74
10.7
11.65
12.61
13.56
14.52
15.47
16.43
17.38
18.34
19.29
20.25
21.2
22.16
23.11
24.07
25.02
25.98
26.93
27.89
28.84
29.8
30.75
31.71
32.66
Inch
P.D.
.338
.376
.414
.451
.489
.526
.564
.602
.639
.677
.714
.752
.790
.827
.865
.902
.940
.977
1.015
1.053
1.090
1.128
1.165
1.203
1.241
1.278
1.316
D
Dia.
.308
.346
.384
.421
.459
.496
.534
.572
.609
.647
.684
.722
.760
.797
.835
.872
.910
.947
.985
1.023
1.060
1.098
1.135
1.173
1.211
1.248
1.286
D1**
Shank
Dia.
4.7 (3/16)
4.7 (3/16)
6.3 (1/4)
6.3 (1/4)
7.9 (5/16)
7.9 (5/16)
9.5 (3/8)
9.5 (3/8)
12.7 (1/2)
12.7 (1/2)
12.7 (1/2)
12.7 (1/2)
12.7 (1/2)
12.7 (1/2)
12.7 (1/2)
12.7 (1/2)
12.7 (1/2)
12.7 (1/2)
12.7 (1/2)
12.7 (1/2)
12.7 (1/2)
12.7 (1/2)
12.7 (1/2)
12.7 (1/2)
12.7 (1/2)
12.7 (1/2)
12.7 (1/2)
L1
25 (1)
25 (1)
25 (1)
22 (7/8)
22 (7/8)
22 (7/8)
22 (7/8)
75 (3)
75 (3)
75 (3)
100 (4)
100 (4)
100 (4)
100 (4)
125 (5)
125 (5)
125 (5)
125 (5)
150 (6)
150 (6)
150 (6)
150 (6)
150 (6)
150 (6)
150 (6)
150 (6)
150 (6)
150 (6)
175 (7)
175 (7)
175 (7)
175 (7)
175 (7)
175 (7)
Shank Lgth. Min. Usable

(Ref.)
Length
25
(1)
19
[ (3/4)
]

** Shank Diameter of 9.5 mm (3/8") for pulley with 9 to 12 grooves may be substituted at SDP option.
Shank Diameter of 11.1 mm (37/16") for pulley with 13 & 14 grooves may be substituted at SDP option.
5
6
7
8
9
10
11
12
13
14
15
2-181
16

PROFILE
MATERIAL:
Metric
Inch
Aluminum Alloy
T
1
SPECIFICATIONS:
101
D Tolerance:
36 to 52 grooves is +0.08/0 (+.003/-.000)
54 to 100 grooves is +0.10/0 (+.004/-.000)
110 to 160 grooves is +0.13/0 (+.005/-.000)

25 (1)
[ 19 (3/4) ]
200 (8)
D1
4
5
6
7
8
9
10
11
12
13
14
METRIC COMPONENT
Catalog Number
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
36
37
38
39
40
42
44
45
48
50
52
54
56
60
62
64
66
68
70
72
75
80
90
100
110
120
130
140
150
160
6A52M036GT20
6A52M037GT20
6A52M038GT20
6A52M039GT20
6A52M040GT20
6A52M042GT20
6A52M044GT20
6A52M045GT20
6A52M048GT20
6A52M050GT20
6A52M052GT20
6A52M054GT20
6A52M056GT20
6A52M060GT20
6A52M062GT20
6A52M064GT20
6A52M066GT20
6A52M068GT20
6A52M070GT20
6A52M072GT20
6A52M075GT20
6A52M080GT20
6A52M090GT20
6A52M100GT20
6A52M110GT20
6A52M120GT20
6A52M130GT20
6A52M140GT20
6A52M150GT20
6A52M160GT20
15
16
No.
of
Grooves
2-182
Metric
Inch
P.D.
D
Dia.
34.4
35.3
36.3
37.2
38.2
40.1
42
43
45.8
47.7
49.7
51.6
53.5
57.3
59.2
61.1
63
64.9
66.8
68.8
71.6
76.4
85.9
95.5
105
114.6
124.1
133.7
143.2
152.8
33.62
34.57
35.53
36.48
37.44
39.35
41.25
42.21
45.07
46.98
48.89
50.8
52.71
56.53
58.44
60.35
62.26
64.17
66.08
67.99
70.86
75.63
85.18
94.73
104.28
113.83
123.38
132.93
142.48
152.03
P.D.
D
Dia.
D1
Shank
Dia.
1.353
1.391
1.429
1.466
1.504
1.579
1.654
1.692
1.805
1.880
1.955
2.030
2.105
2.256
2.331
2.406
2.481
2.557
2.632
2.707
2.820
3.008
3.384
3.760
4.136
4.511
4.887
5.263
5.639
6.015
1.323
1.361
1.399
1.436
1.474
1.549
1.624
1.662
1.775
1.850
1.925
2.000
2.075
2.226
2.301
2.376
2.451
2.527
2.602
2.677
2.790
2.978
3.354
3.730
4.106
4.481
4.857
5.233
5.609
5.985
12.7 (1/2)
12.7 (1/2)
12.7 (1/2)
12.7 (1/2)
12.7 (1/2)
12.7 (1/2)
12.7 (1/2)
12.7 (1/2)
12.7 (1/2)
19.1 (3/4)
19.1 (3/4)
19.1 (3/4)
19.1 (3/4)
19.1 (3/4)
19.1 (3/4)
19.1 (3/4)
19.1 (3/4)
19.1 (3/4)
19.1 (3/4)
19.1 (3/4)
19.1 (3/4)
19.1 (3/4)
19.1 (3/4)
25.4 (1)
25.4 (1)
25.4 (1)
25.4 (1)
25.4 (1)
25.4 (1)
25.4 (1)


DOUBLE OR NO FLANGE
PROFILE
R
Inch
MATERIAL:
Aluminum Alloy
FINISH:
Clear Anodized
SPECIFICATIONS:
O.D. Tolerance:
16 to 26 grooves is +.002/-.000
28 to 50 grooves is +.003/-.000
56 to 80 grooves is +.004/-.000
D/2
#6-40
SET SCREW
E
W
D/2
#8-32
SET SCREW
.28
All pulleys have 2 set screws

at 90.
B C
O.D. F.D. F.D. O.D.
C B
#8-32
SET SCREW
E
.407
O.D.
D
D/2
BC
Fig. 1
B
Bore
P.D.
6A53-016DF0606
6A53-017DF0606
16
17
.602
.639
.572
.609
.710
.740
.1875
.1875
6A53-018DF0608
6A53-019DF0608
6A53-020DF0608
6A53-021DF0608
6A53-022DF0608
6A53-024DF0608
6A53-025DF0608
6A53-026DF0608
6A53-028DF0608
6A53-030DF0608
6A53-032DF0608
6A53-034DF0608
6A53-036DF0608
6A53-038DF0608
6A53-040DF0608
6A53-044DF0608
6A53-045DF0608
18
19
20
21
22
24
25
26
28
30
32
34
36
38
40
44
45
.677
.714
.752
.790
.827
.902
.940
.977
1.053
1.128
1.203
1.278
1.353
1.429
1.504
1.654
1.692
.647
.684
.722
.760
.797
.872
.910
.947
1.023
1.098
1.173
1.248
1.323
1.399
1.474
1.624
1.662
.790
.815
.895
.895
.945
1.025
1.060
1.105
1.173
1.250
1.323
1.398
1.473
1.549
1.625
1.775
1.775
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
6A53-034NF0608
6A53-036NF0608
6A53-038NF0608
6A53-040NF0608
6A53-044NF0608
6A53-045NF0610
6A53-048NF0610
6A53-050NF0610
6A53-056NF0610
6A53-060NF0610
6A53-062NF0610
6A53-068NF0610
6A53-072NF0610
6A53-080NF0610
34
36
38
40
44
45
48
50
56
60
62
68
72
80
1.278
1.353
1.429
1.504
1.654
1.692
1.805
1.880
2.105
2.256
2.331
2.557
2.707
3.008
1.248
1.323
1.399
1.474
1.624
1.662
1.775
1.850
2.075
2.226
2.301
2.527
2.677
2.978
.250
.250
.250
.250
.250
.3125
.3125
.3125
.3125
.3125
.3125
.3125
.3125
.3125
Catalog Number
Fig. 1
A
A
Fig. 2
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
Fig. 3
A
A
A
A
A
A
A
A
A
A
A
A
A
A
Fig. 2
No.
of
Grooves
O.D.
F.D.
1/64
+.001
-.000
Fig. 3
E
Length
C
Hub
Dia.
1/64
D
Hub
Proj.
9/16
9/16
.710
.740
15/64
15/64
.386
.386
.386
.386
.386
.386
.386
.386
.386
.386
.386
.407
.407
.407
.407
.407
.407
11/16
11/16
11/16
11/16
11/16
11/16
11/16
11/16
11/16
11/16
11/16
23/32
23/32
23/32
23/32
23/32
23/32
.442
.468
.500
.500
.562
.625
.625
.625
.701
.776
.851
.921
1.000
1.075
1.150
1.300
1.300
19/64
19/64
19/64
19/64
19/64
19/64
19/64
19/64
19/64
19/64
19/64
5/16
5/16
5/16
5/16
5/16
5/16
23/32
23/32
47/64
47/64
47/64
47/64
47/64
47/64
47/64
47/64
47/64
47/64
47/64
47/64
.921
1.000
1.075
1.150
1.300
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
5/16
5/16
21/64
21/64
21/64
21/64
21/64
21/64
21/64
21/64
21/64
21/64
21/64
21/64
3
4
.28
INCH COMPONENT
1/64
2-183
5
6
7
8
9
10
11
12
13
14
15
16

R
Inch
0
HERES HOW IT WORKS:
2
3
4
5
6
7
8
9
10


13
14
15
16
HUB
FEATURES:

FRONT

11
12
SOLID HINGE
PORTION
TRANSVERSE
SLOT
RADIAL SLOT
BACK
Fairloc Hub Pulleys

Pitch
Page #
.080
1/5
3 mm HTD
5 mm HTD
2 mm GT2
3 mm GT2
2-27
2-76
2-121
2-147
2-167
2-185
Legend
Fastening Method
Clamps
Yes
No
No
Yes
No
*Fairloc
Yes
Yes
Yes
Yes
Yes
B Self-contained
Keys
No
No
No
No
No
Pins
No
No
No
No
Yes
D Easy adjustment
Set Screws
No
No
No
No
Yes
* Patented
2-184

FAIRLOC HUB
DOUBLE OR NO FLANGE
PROFILE
R
Inch
MATERIAL:
Aluminum Alloy
FINISH:
Clear Anodized
SPECIFICATIONS:
O.D. Tolerance:
18 to 26 grooves is +.002/-.000
30 to 50 grooves is +.003/-.000
56 to 80 grooves is +.004/-.000
#6-32 CAP SCREW
#6-32 CAP SCREW
D
B
F.D. O.D.
F.D. O.D.
O.D. B
.40
Fig. 1
A
A
A
A
A
A
Fig. 2
A
A
A
A
A
A
A
Fig. 3
A
A
A
A
A
A
A
A
A
A
A
.40
Fig. 1
INCH COMPONENT
#6-32 CAP SCREW
Fig. 2
B
Bore
Fig. 3
No.
of
Grooves
P.D.
6D53-018DF0908
6D53-020DF0908
6D53-022DF0908
6D53-024DF0908
6D53-025DF0908
6D53-026DF0908
18
20
22
24
25
26
.677
.752
.827
.902
.940
.977
.647
.722
.797
.872
.910
.947
.790
.895
.945
1.025
1.060
1.105
.250
.250
.250
.250
.250
.250
6D53-030DF0908
6D53-032DF0908
6D53-034DF0908
6D53-036DF0908
6D53-038DF0908
6D53-040DF0908
6D53-045DF0908
30
32
34
36
38
40
45
1.128
1.203
1.278
1.353
1.429
1.504
1.692
1.098
1.173
1.248
1.323
1.399
1.474
1.662
1.250
1.323
1.398
1.473
1.549
1.625
1.775
.250
.250
.250
.250
.250
.250
.250
6D53-034NF0908
6D53-036NF0908
6D53-038NF0908
6D53-040NF0908
6D53-045NF0910
6D53-048NF0910
6D53-050NF0910
6D53-056NF0910
6D53-060NF0910
6D53-072NF0910
6D53-080NF0910
34
36
38
40
45
48
50
56
60
72
80
1.278
1.353
1.429
1.504
1.692
1.805
1.880
2.105
2.256
2.707
3.008
1.248
1.323
1.399
1.474
1.662
1.775
1.850
2.075
2.226
2.677
2.978
.250
.250
.250
.250
.3125
.3125
.3125
.3125
.3125
.3125
.3125
Catalog Number
O.D.
F.D.
1/64
+.001
-.000
E
Length
C
Hub
Dia.
1/64
D
Hub
Proj.
13/16
13/16
13/16
13/16
13/16
13/16
3/4
3/4
3/4
3/4
3/4
3/4
19/64
19/64
19/64
19/64
19/64
19/64
.506
.506
.527
.527
.527
.527
.527
13/16
13/16
27/32
27/32
27/32
27/32
27/32
3/4
3/4
3/4
3/4
3/4
3/4
3/4
19/64
19/64
5/16
5/16
5/16
5/16
5/16
.527
.527
.527
.527
.500
.500
.500
.500
.500
.500
.500
27/32
27/32
27/32
27/32
7/8
7/8
7/8
7/8
7/8
7/8
7/8
3/4
3/4
3/4
3/4
1
1
1
1
1
1
1
5/16
5/16
5/16
5/16
3/8
3/8
3/8
3/8
3/8
3/8
3/8
1/64
2-185
8
9
10
11
12
13
14
15
16
I
R
T


DOUBLE OR NO FLANGE
PROFILE
Inch
MATERIAL:
Aluminum Alloy
FINISH:
Clear Anodized
SPECIFICATIONS:
2
3
O.D. Tolerance:
16 to 26 grooves is +.002/-.000
28 to 50 grooves is +.003/-.000
56 to 80 grooves is +.004/-.000
D/2
All pulleys have 2 set screws

at 90.
C B
#6-40
SET SCREW
E
W
D/2
D
#8-32
SET SCREW
.40
B C
O.D. F.D. F.D. O.D.
4
5
7
8
9
10
11
12
13
14
15
16
O.D.
D
D/2
BC
.40
Fig. 1
INCH COMPONENT
Fig. 1
A
A
Fig. 2
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
Fig. 3
A
A
A
A
A
A
A
A
A
A
A
A
A
A
Fig. 2
B
Bore
No.
of
Grooves
P.D.
6A53-016DF0906
6A53-017DF0906
16
17
.602
.639
.572
.609
.710
.740
.1875
.1875
6A53-018DF0908
6A53-019DF0908
6A53-020DF0908
6A53-021DF0908
6A53-022DF0908
6A53-024DF0908
6A53-025DF0908
6A53-026DF0908
6A53-028DF0908
6A53-030DF0908
6A53-032DF0908
6A53-034DF0908
6A53-036DF0908
6A53-038DF0908
6A53-040DF0908
6A53-044DF0908
6A53-045DF0908
18
19
20
21
22
24
25
26
28
30
32
34
36
38
40
44
45
.677
.714
.752
.790
.827
.902
.940
.977
1.053
1.128
1.203
1.278
1.353
1.429
1.504
1.654
1.692
.647
.684
.722
.760
.797
.872
.910
.947
1.023
1.098
1.173
1.248
1.323
1.399
1.474
1.624
1.662
.790
.815
.895
.895
.945
1.025
1.060
1.105
1.173
1.250
1.323
1.398
1.473
1.549
1.625
1.775
1.775
6A53-034NF0908
6A53-036NF0908
6A53-038NF0908
6A53-040NF0908
6A53-044NF0908
6A53-045NF0910
6A53-048NF0910
6A53-050NF0910
6A53-056NF0910
6A53-060NF0910
6A53-062NF0910
6A53-068NF0910
6A53-072NF0910
6A53-080NF0910
34
36
38
40
44
45
48
50
56
60
62
68
72
80
1.278
1.353
1.429
1.504
1.654
1.692
1.805
1.880
2.105
2.256
2.331
2.557
2.707
3.008
1.248
1.323
1.399
1.474
1.624
1.662
1.775
1.850
2.075
2.226
2.301
2.527
2.677
2.978
Catalog Number
#8-32
SET SCREW
E
W
2-186
O.D.
F.D.
1/64
Fig. 3
E
Length
C
Hub
Dia.
1/64
1/64
D
Hub
Proj.
11/16
11/16
.710
.740
15/64
15/64
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
.506
.506
.506
.506
.506
.506
.506
.506
.527
.527
.527
.527
.527
.527
.527
.527
.527
13/16
13/16
13/16
13/16
13/16
13/16
13/16
13/16
27/32
27/32
27/32
27/32
27/32
27/32
27/32
27/32
27/32
.442
.468
.500
.500
.562
.625
.625
.625
.701
.776
.851
.921
1.000
1.075
1.150
1.300
1.300
19/64
19/64
19/64
19/64
19/64
19/64
19/64
19/64
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
.250
.250
.250
.250
.250
.3125
.3125
.3125
.3125
.3125
.3125
.3125
.3125
.3125
.527
.527
.527
.527
.527
.500
.500
.500
.500
.500
.500
.500
.500
.500
27/32
27/32
27/32
27/32
27/32
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
.921
1.000
1.075
1.150
1.300
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
5/16
5/16
5/16
5/16
5/16
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
+.001
-.000


MOLDED WITH INSERT
DOUBLE FLANGE
PROFILE
R
Inch
MATERIAL:

T
1
13/16
1/4
1/8
F.D. O.D.
SET
SCREW
A* C
1/16
F.D. O.D.
SPOT
DRILL
7/16
13/16
1/4
9/64
7/16
Fig. 1
SET
SCREW
A C
SPOT
DRILL
Fig. 2
INCH COMPONENT
No.
of
Grooves
P.D.
6Z53-016DF0906
16
.602
.572
.82
6Z53-017DF0906
6Z53-017DF0908
6Z53-018DF0906
6Z53-018DF0908
6Z53-019DF0906
6Z53-019DF0908
6Z53-020DF0906
6Z53-020DF0908
6Z53-022DF0906
6Z53-022DF0908
6Z53-025DF0908
6Z53-025DF0910
6Z53-025DF0912
6Z53-028DF0908
6Z53-028DF0910
6Z53-028DF0912
17
17
18
18
19
19
20
20
22
22
25
25
25
28
28
28
.639
.639
.677
.677
.714
.714
.752
.752
.827
.827
.940
.940
.940
1.052
1.052
1.052
.609
.609
.647
.647
.684
.684
.722
.722
.797
.797
.910
.910
.910
1.023
1.023
1.023
.87
.87
.93
.93
.93
.93
.93
.93
1.06
1.06
1.19
1.19
1.19
1.24
1.24
1.24
Catalog Number
Fig. 1
A
Fig. 2
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
* 1/4" long insert in hub end only.
O.D.
F.D.
B
Bore
A
Dia.
C
Hub
Dia.
Set
Screw
.1875
7/16 *
11/16
#6-32
.1875
.250
.1875
.250
.1875
.250
.1875
.250
.1875
.250
.250
.3125
.375
.250
.3125
.375
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
1/2
1/2
1/2
1/2
1/2
1/2
11/16
11/16
11/16
11/16
11/16
11/16
11/16
11/16
11/16
11/16
3/4
3/4
3/4
3/4
3/4
3/4
#6-32
#6-32
#6-32
#6-32
#6-32
#6-32
#6-32
#6-32
#6-32
#6-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
+.001
-.000
6
7
8
9
10
11
12
13
14
15
2-187
16
I
R
T


MOLDED WITH INSERT
DOUBLE FLANGE
PROFILE
Inch
MATERIAL:

1
2
7/8
13/16
#10-32
SET
SCREW
#8-32
SET SCREW
4
O.D. 1/2
B C F.D.
O.D. 5/8
3/16
SPOT DRILL
7/16
3/16
Fig. 1
8
9
10
11
12
13
14
B C F.D.
SPOT DRILL
6
7
5/16
5/32
1/4
9/64
7/16
Fig. 2
INCH COMPONENT
No.
of
Grooves
P.D.
O.D.
F.D.
B
Bore
+.001
-.000
C
Hub
Dia.
6Z53-032DF0908
6Z53-032DF0910
6Z53-032DF0912
6Z53-036DF0908
6Z53-036DF0910
6Z53-036DF0912
6Z53-040DF0908
6Z53-040DF0910
6Z53-040DF0912
6Z53-048DF0908
6Z53-048DF0910
6Z53-048DF0912
32
32
32
36
36
36
40
40
40
48
48
48
1.203
1.203
1.203
1.353
1.353
1.353
1.504
1.504
1.504
1.805
1.805
1.805
1.173
1.173
1.173
1.323
1.323
1.323
1.474
1.474
1.474
1.775
1.775
1.775
1.44
1.44
1.44
1.57
1.57
1.57
1.76
1.76
1.76
2.02
2.02
2.02
.250
.3125
.375
.250
.3125
.375
.250
.3125
.375
.250
.3125
.375
3/4
3/4
3/4
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
6Z53-060DF0910
6Z53-060DF0912
6Z53-060DF0916
6Z53-072DF0910
6Z53-072DF0912
6Z53-072DF0916
6Z53-080DF0910
6Z53-080DF0912
6Z53-080DF0916
60
60
60
72
72
72
80
80
80
2.256
2.256
2.256
2.707
2.707
2.707
3.008
3.008
3.008
2.226
2.226
2.226
2.677
2.677
2.677
2.978
2.978
2.978
2.46
2.46
2.46
2.92
2.92
2.92
3.29
3.29
3.29
.3125
.375
.500
.3125
.375
.500
.3125
.375
.500
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
Catalog Number
Fig. 1
A
A
A
A
A
A
A
A
A
A
A
A
Fig. 2
A
A
A
A
A
A
A
A
A
15
16
2-188


MOLDED WITH INSERT
SINGLE OR NO FLANGE
PROFILE
R
Inch
MATERIAL:

T
1
1/2
13/16
7/8
3/8
3/16
5/16
5/32
#10-32
SET SCREW
O.D. 5/8
B C F.D.
3/16
#10-32
SET SCREW
O.D. 5/8
B C
5
SPOT DRILL
3/16
SPOT DRILL
7/16
Fig. 1
Fig. 2
INCH COMPONENT
Catalog Number
A 6Z53-084SF0910
A 6Z53-084SF0912
A 6Z53-084SF0916
A 6Z53-096SF0910
A 6Z53-096SF0912
A 6Z53-096SF0916
Fig. 2 No Flange
A 6Z53-120NF0912
A 6Z53-120NF0916
No.
of
Grooves
P.D.
O.D.
F.D.
B
Bore
+.001
-.000
C
Hub
Dia.
84
84
84
96
96
96
3.158
3.158
3.158
3.609
3.609
3.609
3.128
3.128
3.128
3.579
3.579
3.579
3.38
3.38
3.38
3.83
3.83
3.83
.3125
.375
.500
.3125
.375
.500
7/8
7/8
7/8
1
1
1
120
120
4.511
4.511
4.481
4.481
.375
.500
1
1
8
9
10
11
12
13
14
15
2-189
16
I
R
T
1

MOLDED
DOUBLE FLANGE
PROFILE
Inch
MATERIAL:
SPECIFICATION:

do not have webs.
2
B
7
8
9
10
11
O.D.
7/16
5/16
1/4
B
O.D.
C F.D.
O.D.
C F.D.
B
3/16
Fig. 1
7/16
3/16
Fig. 2
7/16
Fig. 3
INCH COMPONENT
Catalog Number
Fig. 1
A 6L53-016DF0906
Fig. 2 Solid
A 6L53-017DF0906
A 6L53-018DF0906
A 6L53-019DF0906
A 6L53-020DF0906
A 6L53-022DF0906
A 6L53-025DF0908
A 6L53-028DF0908
Fig. 2
A 6L53-032DF0908
A 6L53-036DF0908
A 6L53-040DF0908
A 6L53-048DF0908
Fig. 3
A 6L53-060DF0910
A 6L53-072DF0910
A 6L53-080DF0910
12
13
14
15
16
1/4
C F.D.
7/8
13/16
13/16
2-190
No.
of
Grooves
P.D.
O.D.
F.D.
B
Bore
+.001
-.000
C
Hub
Dia.
16
.602
.572
.82
.1875
11/16
17
18
19
20
22
25
28
.639
.677
.714
.752
.827
.940
1.053
.609
.647
.684
.722
.797
.910
1.023
.87
.93
.93
.93
1.06
1.19
1.24
.1875
.1875
.1875
.1875
.1875
.250
.250
11/16
11/16
11/16
11/16
11/16
3/4
3/4
32
36
40
48
1.203
1.353
1.504
1.805
1.173
1.323
1.474
1.775
1.44
1.57
1.76
2.02
.250
.250
.250
.250
3/4
7/8
7/8
7/8
60
72
80
2.256
2.707
3.008
2.226
2.677
2.978
2.46
2.92
3.29
.3125
.3125
.3125
7/8
7/8
7/8

MOLDED
SINGLE FLANGE
PROFILE
R
Inch
MATERIAL:
SPECIFICATION:

do not have webs.
1/4
1/16
1/2
1/16
C F.D.
O.D.
1/4
13/16
13/16
7/16
O.D.
3/16
F.D.
7/16
Fig. 1
Fig. 2
INCH COMPONENT
Catalog Number
Fig. 1
A 6L53-016SF0906
Fig. 2 Solid
A 6L53-017SF0906
A 6L53-018SF0906
A 6L53-019SF0906
A 6L53-020SF0906
A 6L53-022SF0906
A 6L53-025SF0908
A 6L53-028SF0908
Fig. 2
A 6L53-032SF0908
A 6L53-036SF0908
A 6L53-040SF0908
A 6L53-048SF0908
No.
of
Grooves
P.D.
O.D.
F.D.
B
Bore
+.001
-.000
C
Hub
Dia.
16
.602
.572
.82
.1875
11/16
17
18
19
20
22
25
28
.639
.677
.714
.752
.827
.940
1.053
.609
.647
.684
.722
.797
.910
1.023
.87
.93
.93
.93
1.06
1.19
1.24
.1875
.1875
.1875
.1875
.1875
.250
.250
11/16
11/16
11/16
11/16
11/16
3/4
3/4
32
36
40
48
1.203
1.353
1.504
1.805
1.173
1.323
1.474
1.775
1.44
1.57
1.76
2.02
.250
.250
.250
.250
3/4
7/8
7/8
7/8
8
9
10
11
12
13
14
15
2-191
16
I
R
T

BELT WIDTHS
METRIC - 9 & 15 mm
NON-MARKING
LOW DUST
RoHS COMPLIANT
PowerGrip TruMotion
Metric
Inch
10
1
MATERIAL:

SPECIFICATIONS:
2
3
4
5
6
7
8
9
Breaking Strength:
Working Tension:
Temperature Range:
-40C to +104C (-40F to +220F)
MODIFICATIONS:
1.93
(.076)
3.81
(.150)

METRIC COMPONENT
CATALOG NUMBER
A26R55M
No. of
Grooves
Code
Belt Width
mm
9 (.354)
15 (.591)
25 (.984)
10
11
12
13
14
15
16
5
(.197)
2-192
Width
Code
090
150
250
Groove
Code
060
071
075
080
081
085
090
100
107
113
115
116
120
125
130
140
150
160
163
170
180
200
230
260
290
320
344
351
Pitch Length
mm
Inch
300
355
375
400
405
425
450
500
535
565
575
580
600
625
650
700
750
800
815
850
900
1000
1150
1300
1450
1600
1720
1755
11.811
13.976
14.764
15.748
15.945
16.732
17.716
19.685
21.063
22.244
22.638
22.835
23.622
24.606
25.590
27.559
29.528
31.496
32.087
33.465
35.433
39.370
45.276
51.181
57.087
62.992
67.716
69.094

BELT WIDTHS
METRIC - 9, 15 & 25 mm
PROFILE
Metric
Inch
MATERIAL:
101
R
T
SPECIFICATIONS:
Breaking Strength:
Working Tension:
Temperature Range:
-34C to +85C (-30F to +185F)
1
2
3
MODIFICATIONS:
5
(.197)

1.93
(.076)
3.81
(.150)
METRIC COMPONENT
CATALOG NUMBER
A 6R55M
No. of
Grooves
Code
Belt Width
mm
9 (.354)
15 (.591)
25 (.984)
Width
Code
090
150
250
Groove
Code
040
045
050
053
055
056
057
060
065
066
068
070
071
072
075
080
081
082
083
085
088
089
090
092
095
098
100
102
105
106
107
108
Pitch Length
mm
Inch
200
225
250
265
275
280
285
300
325
330
340
350
355
360
375
400
405
410
415
425
440
445
450
460
475
490
500
510
525
530
535
540
7.874
8.858
9.842
10.433
10.827
11.024
11.220
11.811
12.795
12.992
13.386
13.780
13.976
14.173
14.764
15.748
15.945
16.142
16.339
16.732
17.323
17.520
17.716
18.110
18.701
19.291
19.685
20.079
20.669
20.866
21.063
21.260
Groove
Code
110
113
115
116
120
125
127
130
133
140
150
155
160
163
170
172
180
190
200
210
230
254
260
290
300
320
344
351
370
420
488
Pitch Length
mm
Inch
550
565
575
580
600
625
635
650
665
700
750
775
800
815
850
860
900
950
1000
1050
1150
1270
1300
1450
1580
1600
1720
1755
1850
2100
2440
21.654
22.244
22.638
22.835
23.622
24.606
25.000
25.590
26.181
27.559
29.528
30.512
31.496
32.087
33.465
33.858
35.433
37.401
39.370
41.338
45.276
50.000
51.181
57.087
59.055
62.992
67.716
69.094
72.835
82.677
96.063
2-193
5
6
7
8
9
10
11
12
13
14
15
16
I
R
T

BELT WIDTHS
METRIC - 9, 15 & 25 mm
PROFILE
Metric
Inch
MATERIAL:
101
SPECIFICATIONS:
1
2
3
4
Breaking Strength:
Working Tension:
Temperature Range:
-34C to +85C (-30F to +185F)
5
(.197)
MODIFICATIONS:

5
(.197)

or inch standards.
1.14
(.045)
5
6
METRIC COMPONENT
CATALOG NUMBER
A 6R55MD
No. of
Grooves
Code
Belt Width
mm
9 (.354)
15 (.591)
25 (.984)
8
9
10
11
12
13
14
15
16
2-194
Width
Code
090
150
250
Groove
Code
080
081
085
090
100
107
113
115
116
120
125
130
140
142
148
149
150
153
158
160
163
166
167
170
174
178
180
185
190
195
197
200
210
Pitch Length
mm
Inch
Groove
Code
400
405
425
450
500
535
565
575
580
600
625
650
700
710
740
745
750
765
790
800
815
830
835
850
870
890
900
925
950
975
985
1000
1050
15.748
15.945
16.732
17.717
19.685
21.063
22.244
22.638
22.835
23.622
24.606
25.591
27.559
27.953
29.134
29.331
29.528
30.118
31.102
31.496
32.087
32.677
32.874
33.465
34.252
35.039
35.433
36.417
37.402
38.359
38.779
39.370
41.339
223
225
230
239
250
254
259
260
275
284
290
315
319
320
327
338
344
351
358
360
379
389
396
400
422
450
505
552
624
634
640
686
760
Pitch Length
mm
Inch
1115
1125
1150
1195
1250
1270
1295
1300
1375
1420
1450
1575
1595
1600
1635
1690
1720
1755
1790
1800
1895
1945
1980
2000
2110
2250
2525
2760
3120
3170
3200
3430
3800
43.898
44.291
45.276
47.047
49.213
50.000
50.984
51.181
54.134
55.905
57.087
62.008
62.795
62.992
64.370
66.535
67.716
69.094
70.472
70.866
74.606
76.575
77.953
78.740
83.071
88.583
99.409
108.661
122.834
124.803
125.984
135.039
149.606
GT 2 PULLEY FLANGES 5 mm PITCH

FOR
PROFILE
MATERIAL:
Metric
Inch
SPECIFICATION:
101
R
T
1
2
1.65 0.25
(.065 .010)
3
d
1.02
(.040)
METRIC COMPONENT
Catalog Number
Aluminum
Alloy
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
6A54M012FA
6A54M013FA
6A54M014FA
6A54M015FA
6A54M016FA
6A54M017FA
6A54M018FA
6A54M019FA
6A54M020FA
6A54M021FA
6A54M022FA
6A54M023FA
6A54M024FA
6A54M025FA
6A54M026FA
6A54M028FA
6A54M030FA
6A54M032FA
6A54M034FA
Steel
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
6C54M012FS
6C54M013FS
6C54M014FS
6C54M015FS
6C54M016FS
6C54M017FS
6C54M018FS
6C54M019FS
6C54M020FS
6C54M021FS
6C54M022FS
6C54M023FS
6C54M024FS
6C54M025FS
6C54M026FS
6C54M028FS
6C54M030FS
6C54M032FS
6C54M034FS
Pulley
Grooves
(Ref.)
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
28
30
32
34
Metric
d
Dia.
0.08
12.78
14.27
14.27
15.88
17.37
19
20.58
22.53
23.77
25.4
26.97
28.58
29.46
31.04
31.04
34.21
36.2
39.37
42.55
Inch
D
Dia.
0.4
22.2
23.8
25.4
27
27.8
30.2
31.8
33.3
34.9
36.5
38.1
39.7
41.3
42.9
44.5
47.6
50.8
54
57.2
d
Dia.
.003
.503
.562
.562
.625
.684
.748
.810
.887
.936
1.000
1.062
1.125
1.160
1.222
1.222
1.347
1.425
1.550
1.675
D
Dia.
1/64
7/8
15/16
1
1-1/16
1-3/32
1-3/16
1-1/4
1-5/16
1-3/8
1-7/16
1-1/2
1-9/16
1-5/8
1-11/16
1-3/4
1-7/8
2
2-1/8
2-1/4
6
7
8
9
10
11
12
13
14
15
2-195
16

PROFILE
MATERIAL:
Metric
Inch
Aluminum Alloy
T
1
2
SPECIFICATIONS:
101
D Tolerance:
12 to 16 grooves is +0.05/0 (+.002/-.000)
17 to 32 grooves is +0.08/0 (+.003/-.000)
33 to 40 grooves is +0.10/0 (+.004/-.000)

Number of grooves not listed
and larger sizes.
L1
D1
4
METRIC COMPONENT
5
6
7
8
9
10
11
12
13
Catalog Number
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
6A54M012GT15
6A54M013GT15
6A54M014GT18
6A54M015GT18
6A54M016GT18
6A54M017GT18
6A54M018GT20
6A54M019GT20
6A54M020GT20
6A54M021GT20
6A54M022GT20
6A54M023GT20
6A54M024GT20
6A54M025GT20
6A54M026GT20
6A54M027GT20
6A54M028GT20
6A54M029GT20
6A54M030GT20
6A54M031GT20
6A54M032GT20
6A54M033GT20
6A54M034GT20
6A54M035GT20
6A54M036GT20
6A54M038GT20
6A54M040GT20
15
2-196
Inch
P.D.
D
Dia.
P.D.
D
Dia.
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
38
40
19.1
20.7
22.3
23.9
25.5
27.1
28.6
30.2
31.8
33.4
35
36.6
38.2
39.8
41.4
43
44.6
46.2
47.7
49.3
50.9
52.5
54.1
55.7
57.3
60.5
63.7
17.96
19.55
21.14
22.73
24.32
25.91
27.5
29.1
30.69
32.28
33.87
35.46
37.05
38.65
40.24
41.83
43.42
45.01
46.6
48.2
49.79
51.38
52.97
54.56
56.15
59.34
62.52
.752
.815
.877
.940
1.003
1.065
1.128
1.191
1.253
1.316
1.379
1.441
1.504
1.566
1.629
1.692
1.754
1.817
1.880
1.942
2.005
2.068
2.130
2.193
2.256
2.381
2.506
.707
.770
.832
.895
.958
1.020
1.083
1.146
1.208
1.271
1.334
1.396
1.459
1.521
1.584
1.647
1.709
1.772
1.835
1.897
1.960
2.023
2.085
2.148
2.211
2.336
2.461

14
16
Metric
No.
of
Grooves
D1
Shank
Dia.
12.7 (1/2)
12.7 (1/2)
12.7 (1/2)
12.7 (1/2)
12.7 (1/2)
12.7 (1/2)
12.7 (1/2)
12.7 (1/2)
12.7 (1/2)
12.7 (1/2)
12.7 (1/2)
12.7 (1/2)
12.7 (1/2)
12.7 (1/2)
L1
Min.
Usable
Length
22 (7/8)
22 (7/8)
150 (6)
150 (6)
175 (7)
175 (7)
175 (7)
175 (7)
200 (8)
200 (8)
200 (8)
200 (8)
200 (8)
200 (8)
200 (8)
200 (8)
200 (8)
200 (8)
200 (8)
200 (8)
200 (8)
200 (8)
200 (8)
200 (8)
200 (8)
200 (8)
200 (8)
200 (8)
200 (8)
(Ref.)
25
(1)
19
[ (3/4)
]
19.1
(3/4)
12.7
[ (1/2)
]
Shank
Length

PROFILE
MATERIAL:
Metric
Inch
Aluminum Alloy
SPECIFICATIONS:
101
D Tolerance:
42 to 62 grooves is +0.10/0 (+.004/-.000)
65 to 90 grooves is +0.13/0 (+.005/-.000)
R
T
1

Number of grooves not listed
and larger sizes.
L1
D1
4
METRIC COMPONENT
Catalog Number
A
A
A
A
A
A
A
A
A
A
A
A
A
A
6A54M042GT20
6A54M044GT20
6A54M045GT20
6A54M046GT20
6A54M048GT20
6A54M050GT20
6A54M054GT20
6A54M056GT20
6A54M060GT20
6A54M062GT20
6A54M065GT20
6A54M072GT20
6A54M080GT20
6A54M090GT20
Metric
Inch
No.
of
Grooves
P.D.
D
Dia.
P.D.
D
Dia.
42
44
45
46
48
50
54
56
60
62
65
72
80
90
66.8
70
71.6
73.2
76.4
79.6
85.9
89.1
95.5
98.7
103.5
114.6
127.3
143.2
65.7
68.89
70.48
72.07
75.25
78.43
84.8
87.98
94.35
97.53
102.31
113.45
126.18
142.1
2.632
2.757
2.82
2.882
3.008
3.133
3.384
3.509
3.76
3.885
4.073
4.511
5.013
5.639
2.587
2.712
2.775
2.837
2.963
3.088
3.339
3.464
3.715
3.84
4.028
4.466
4.968
5.594

D1
Shank
Dia.
19.1 (3/4)
19.1 (3/4)
19.1 (3/4)
19.1 (3/4)
25.4
(1)
19.1
[ (3/4)
]
25.4 (1)
25.4 (1)
25.4 (1)
25.4 (1)
L1
Min.
Usable
Length
Shank
Length
(Ref.)
25
(1)
18
[(23/32)
]
25 (1)
25 (1)
25 (1)
25 (1)
200 (8)
200 (8)
200 (8)
200 (8)
200 (8)
200 (8)
200 (8)
200 (8)
200 (8)
200 (8)
200 (8)
200 (8)
200 (8)
200 (8)
5
6
7
8
9
10
11
12
13
14
15
2-197
16

PROFILE
MATERIAL:
Metric
Inch
Carbon Steel
T
1
SPECIFICATIONS:
101
D Tolerance:
12 to 16 grooves is +0.05/0 (+.002/-.000)
17 to 30 grooves is +0.08/0 (+.003/-.000)
L1
D1
4
METRIC COMPONENT
5
6
7
8
9
10
11
Catalog Number
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
6C54M012GT15
6C54M013GT15
6C54M014GT18
6C54M015GT18
6C54M016GT18
6C54M017GT18
6C54M018GT20
6C54M019GT20
6C54M020GT20
6C54M021GT20
6C54M022GT20
6C54M023GT20
6C54M024GT20
6C54M025GT20
6C54M026GT20
6C54M027GT20
6C54M028GT20
6C54M029GT20
6C54M030GT20
13
14
15
2-198
Inch
P.D.
D
Dia.
P.D.
D
Dia.
D1
Shank
Dia.
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
19.1
20.7
22.3
23.9
25.5
27.1
28.6
30.2
31.8
33.4
35
36.6
38.2
39.8
41.4
43
44.6
46.2
47.7
17.96
19.55
21.14
22.73
24.32
25.91
27.5
29.1
30.69
32.28
33.87
35.46
37.05
38.65
40.24
41.83
43.42
45.01
46.6
.752
.815
.877
.940
1.003
1.065
1.128
1.191
1.253
1.316
1.379
1.441
1.504
1.566
1.629
1.692
1.754
1.817
1.880
.707
.770
.832
.895
.958
1.020
1.083
1.146
1.208
1.271
1.334
1.396
1.459
1.521
1.584
1.647
1.709
1.772
1.835
12.7 (1/2)
12.7 (1/2)
12.7 (1/2)
12.7 (1/2)
12.7 (1/2)
12.7 (1/2)
12.7 (1/2)
12.7 (1/2)
12.7 (1/2)
12.7 (1/2)
12.7 (1/2)
12.7 (1/2)
12.7 (1/2)
12.7 (1/2)
12.7 (1/2)
12.7 (1/2)
12.7 (1/2)
12.7 (1/2)
12.7 (1/2)

12
16
Metric
No.
of
Grooves
L1
Shank
Length
(Ref.)
Min.
Usable
Length
22 (7/8)
22 (7/8)
150 (6)
150 (6)
175 (7)
175 (7)
175 (7)
175 (7)
200 (8)
200 (8)
200 (8)
200 (8)
200 (8)
200 (8)
200 (8)
200 (8)
200 (8)
200 (8)
200 (8)
200 (8)
200 (8)
25
(1)
19
[ (3/4)
]

PROFILE
MATERIAL:
Metric
Inch
Carbon Steel
D Tolerance:
31 & 32 grooves is
33 to 62 grooves is
126 grooves is
SPECIFICATIONS:
101
+0.08/0 (+.003/-.000)
+0.10/0 (+.004/-.000)
+0.13/0 (+.005/-.000)
+0.15/0 (+.006/-.000)
R
T
1
L1
D1
4
METRIC COMPONENT
Catalog Number
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
6C54M031GT20
6C54M032GT20
6C54M033GT20
6C54M034GT20
6C54M035GT20
6C54M036GT20
6C54M038GT20
6C54M040GT20
6C54M042GT20
6C54M044GT20
6C54M045GT20
6C54M046GT20
6C54M048GT20
6C54M050GT20
6C54M054GT20
6C54M056GT20
6C54M060GT20
6C54M062GT20
6C54M065GT20
6C54M072GT20
6C54M080GT20
6C54M090GT20
6C54M100GT20
6C54M112GT20
6C54M126GT20
Metric
Inch
No.
of
Grooves
P.D.
D
Dia.
P.D.
D
Dia.
31
32
33
34
35
36
38
40
42
44
45
46
48
50
54
56
60
62
65
72
80
90
100
112
126
49.3
50.9
52.5
54.1
55.7
57.3
60.5
63.7
66.8
70
71.6
73.2
76.4
79.6
85.9
89.1
95.5
98.7
103.5
114.6
127.3
143.2
159.2
178.3
200.5
48.2
49.79
51.38
52.97
54.56
56.15
59.34
62.52
65.7
68.89
70.48
72.07
75.25
78.43
84.8
87.98
94.35
97.53
102.31
113.45
126.18
142.1
158.01
177.11
199.39
1.942
2.005
2.068
2.130
2.193
2.256
2.381
2.506
2.632
2.757
2.820
2.882
3.008
3.133
3.384
3.509
3.760
3.885
4.073
4.511
5.013
5.639
6.266
7.018
7.895
1.897
1.960
2.023
2.085
2.148
2.211
2.336
2.461
2.587
2.712
2.775
2.837
2.963
3.088
3.339
3.464
3.715
3.840
4.028
4.466
4.968
5.594
6.221
6.973
7.850

D1
Shank
Dia.
19.1 (3/4)
19.1 (3/4)
19.1 (3/4)
19.1 (3/4)
19.1 (3/4)
19.1 (3/4)
19.1 (3/4)
19.1 (3/4)
19.1 (3/4)
19.1 (3/4)
19.1 (3/4)
19.1 (3/4)
L1
25.4 (1)
25.4 (1)
25.4 (1)
25.4 (1)
25.4 (1)
25.4 (1)
25.4 (1)
Min.
Usable
Length
25
(1)
18.2
[(23/32)
]
25.4
(1)
19.1
[ (3/4)
]
Shank
Length
(Ref.)
25 (1)
25 (1)
25 (1)
25 (1)
25 (1)
25 (1)
25 (1)
200 (8)
200 (8)
200 (8)
200 (8)
200 (8)
200 (8)
200 (8)
200 (8)
200 (8)
200 (8)
200 (8)
200 (8)
200 (8)
200 (8)
200 (8)
200 (8)
200 (8)
200 (8)
200 (8)
200 (8)
200 (8)
200 (8)
200 (8)
150 (6)
150 (6)
5
6
7
8
9
10
11
12
13
14
15
2-199
16
I
R
T
GT 2 TIMING BELT PULLEYS 5 mm PITCH


DOUBLE FLANGE
PROFILE
Inch
MATERIAL:
Aluminum Alloy
FINISH:
Clear Anodized
SPECIFICATIONS:
2
3

17 to 32 grooves is +.003/-.000
34 grooves is +.004/-.000
E
Pulleys with 12 and 13 grooves have 1

D
S
SET SCREW
35/64
4
B C
F.D. O.D.
5
.42
6
7
8
9
10
11
INCH COMPONENT
Catalog Number
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
6A55-012DF0908
6A55-013DF0908
6A55-014DF0908
6A55-015DF0908
6A55-016DF0908
6A55-017DF0908
6A55-018DF0908
6A55-019DF0908
6A55-020DF0908
6A55-022DF0908
6A55-024DF0912
6A55-025DF0912
6A55-026DF0912
6A55-028DF0916
6A55-030DF0916
6A55-032DF0916
6A55-034DF0916
12
13
14
15
16
2-200
No.
of
P.D.
Grooves
O.D.
.752
.815
.877
.940
1.003
1.065
1.128
1.191
1.253
1.379
1.504
1.566
1.629
1.754
1.880
2.005
2.130
.707
.770
.832
.895
.958
1.020
1.083
1.146
1.208
1.334
1.459
1.521
1.584
1.709
1.835
1.960
2.085
12
13
14
15
16
17
18
19
20
22
24
25
26
28
30
32
34
F.D.
1/64
7/8
15/16
1
1-1/16
1-3/32
1-3/16
1-1/4
1-5/16
1-3/8
1-1/2
1-5/8
1-11/16
1-3/4
1-7/8
2
2-1/8
2-1/4
B
E
Bore Length
+.001
-.000
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
.375
.375
.375
.500
.500
.500
.500
1/64
51/64
51/64
51/64
51/64
51/64
51/64
51/64
51/64
51/64
51/64
59/64
59/64
59/64
1-3/64
1-3/64
1-3/64
1-3/64
C
Hub
Dia.
1/64
7/16
1/2
1/2
9/16
9/16
5/8
11/16
3/4
13/16
15/16
1
1
1-1/16
1-3/16
1-3/16
1-1/4
1-3/8
D
Hub
Proj.
Set
Screw
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
3/8
3/8
3/8
1/2
1/2
1/2
1/2
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
3/16
3/16
3/16
1/4
1/4
1/4
1/4
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#10-32
#10-32
#10-32
1/4-20
1/4-20
1/4-20
1/4-20


NO FLANGE
PROFILE
R
Inch
MATERIAL:
Aluminum Alloy
FINISH:
Clear Anodized
SPECIFICATIONS:
O.D. Tolerance: 12 to 16 grooves is

17 to 32 grooves is
34 to 62 grooves is
70 & 72 grooves is
+.002/-.000
+.003/-.000
+.004/-.000
+.005/-.000

E
35/64
E
35/64
S
SET
SCREW
S
SET SCREW
B C
O.D.
B C
O.D.
Fig. 2
INCH COMPONENT
No.
of
Grooves
P.D.
Fig. 1
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
Fig. 2
A
A
A
A
A
A
A
A
6A55-012NF0908
6A55-013NF0908
6A55-014NF0908
6A55-015NF0908
6A55-016NF0908
6A55-017NF0908
6A55-018NF0908
6A55-019NF0908
6A55-020NF0908
6A55-022NF0908
6A55-024NF0912
6A55-025NF0912
6A55-026NF0912
6A55-028NF0916
6A55-030NF0916
6A55-032NF0916
6A55-034NF0916
6A55-036NF0916
6A55-038NF0916
6A55-040NF0916
12
13
14
15
16
17
18
19
20
22
24
25
26
28
30
32
34
36
38
40
.752
.815
.877
.940
1.003
1.065
1.128
1.191
1.253
1.379
1.504
1.566
1.629
1.754
1.880
2.005
2.130
2.256
2.381
2.506
.707
.770
.832
.895
.958
1.020
1.083
1.146
1.208
1.334
1.459
1.521
1.584
1.709
1.835
1.960
2.085
2.211
2.336
2.461
6A55-044NF0916
6A55-048NF0916
6A55-050NF0916
6A55-056NF0916
6A55-060NF0916
6A55-062NF0916
6A55-070NF0916
6A55-072NF0916
44
48
50
56
60
62
70
72
2.757
3.008
3.133
3.509
3.760
3.885
4.386
4.511
2.712
2.963
3.088
3.464
3.715
3.840
4.341
4.466
O.D.
B
Bore
E
Length
C
Hub
Dia.
1/64
1/64
D
Hub
Proj.
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
.375
.375
.375
.500
.500
.500
.500
.500
.500
.500
51/64
51/64
51/64
51/64
51/64
51/64
51/64
51/64
51/64
51/64
59/64
59/64
59/64
1-3/64
1-3/64
1-3/64
1-3/64
1-3/64
1-3/64
1-3/64
7/16
5/8
5/8
5/8
5/8
5/8
11/16
3/4
13/16
15/16
1-1/8
1-1/8
1-1/8
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
3/8
3/8
3/8
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
3/16
3/16
3/16
1/4
1/4
1/4
1/4
1/4
1/4
1/4
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#10-32
#10-32
#10-32
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
.500
.500
.500
.500
.500
.500
.500
.500
1-3/64
1-3/64
1-3/64
1-3/64
1-3/64
1-3/64
1-3/64
1-3/64
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
+.001
-.000
4
5
Fig. 1
Catalog Number
Set
Screw
2-201
7
8
9
10
11
12
13
14
15
16
I
R
T


DOUBLE FLANGE
PROFILE
Inch
MATERIAL:
Aluminum Alloy
FINISH:
Clear Anodized
SPECIFICATIONS:
2
3

17 to 32 grooves is +.003/-.000
34 grooves is +.004/-.000
E

D
S
SET SCREW
25/32
4
B C
F.D. O.D.
5
.65
6
7
8
9
10
11
INCH COMPONENT
Catalog Number
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
6A55-012DF1508
6A55-013DF1508
6A55-014DF1508
6A55-015DF1508
6A55-016DF1508
6A55-017DF1508
6A55-018DF1508
6A55-019DF1508
6A55-020DF1508
6A55-022DF1508
6A55-024DF1512
6A55-025DF1512
6A55-026DF1512
6A55-028DF1516
6A55-030DF1516
6A55-032DF1516
6A55-034DF1516
12
13
14
15
16
2-202
No.
of
P.D.
Grooves
O.D.
.752
.815
.877
.940
1.003
1.065
1.128
1.191
1.253
1.379
1.504
1.566
1.629
1.754
1.880
2.005
2.130
.707
.770
.832
.895
.958
1.020
1.083
1.146
1.208
1.334
1.459
1.521
1.584
1.709
1.835
1.960
2.085
12
13
14
15
16
17
18
19
20
22
24
25
26
28
30
32
34
F.D.
1/64
7/8
15/16
1
1-1/16
1-3/32
1-3/16
1-1/4
1-5/16
1-3/8
1-1/2
1-5/8
1-11/16
1-3/4
1-7/8
2
2-1/8
2-1/4
B
E
Bore Length
+.001
-.000
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
.375
.375
.375
.500
.500
.500
.500
1/64
1-1/32
1-1/32
1-1/32
1-1/32
1-1/32
1-1/32
1-1/32
1-1/32
1-1/32
1-1/32
1-5/32
1-5/32
1-5/32
1-9/32
1-9/32
1-9/32
1-9/32
C
Hub
Dia.
1/64
7/16
1/2
1/2
9/16
9/16
5/8
11/16
3/4
13/16
15/16
1
1
1-1/16
1-3/16
1-3/16
1-1/4
1-3/8
D
Hub
Proj.
Set
Screw
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
3/8
3/8
3/8
1/2
1/2
1/2
1/2
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
3/16
3/16
3/16
1/4
1/4
1/4
1/4
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#10-32
#10-32
#10-32
1/4-20
1/4-20
1/4-20
1/4-20


NO FLANGE
PROFILE
R
Inch
MATERIAL:
Aluminum Alloy
FINISH:
Clear Anodized
SPECIFICATIONS:
O.D. Tolerance: 12 to 16 grooves is

17 to 32 grooves is
34 to 62 grooves is
70 & 72 grooves is
+.002/-.000
+.003/-.000
+.004/-.000
+.005/-.000

E
E
25/32
25/32
SET
SCREW
S
SET SCREW
3
4
B C
O.D.
B C
O.D.
Fig. 1
No.
of
Grooves
P.D.
6A55-012NF1508
6A55-013NF1508
6A55-014NF1508
6A55-015NF1508
6A55-016NF1508
6A55-017NF1508
6A55-018NF1508
6A55-019NF1508
6A55-020NF1508
6A55-022NF1508
6A55-024NF1512
6A55-025NF1512
6A55-026NF1512
6A55-028NF1516
6A55-030NF1516
6A55-032NF1516
6A55-034NF1516
6A55-036NF1516
6A55-038NF1516
6A55-040NF1516
12
13
14
15
16
17
18
19
20
22
24
25
26
28
30
32
34
36
38
40
.752
.815
.877
.940
1.003
1.065
1.128
1.191
1.253
1.379
1.504
1.566
1.629
1.754
1.880
2.005
2.130
2.256
2.381
2.506
.707
.770
.832
.895
.958
1.020
1.083
1.146
1.208
1.334
1.459
1.521
1.584
1.709
1.835
1.960
2.085
2.211
2.336
2.461
6A55-044NF1516
6A55-048NF1516
6A55-050NF1516
6A55-056NF1516
6A55-060NF1516
6A55-062NF1516
6A55-070NF1516
6A55-072NF1516
44
48
50
56
60
62
70
72
2.757
3.008
3.133
3.509
3.760
3.885
4.386
4.511
2.712
2.963
3.088
3.464
3.715
3.840
4.341
4.466
Catalog Number
Fig. 1
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
Fig. 2
A
A
A
A
A
A
A
A
Fig. 2
INCH COMPONENT
O.D.
B
Bore
C
Hub
Dia.
1/64
1/64
D
Hub
Proj.
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
.375
.375
.375
.500
.500
.500
.500
.500
.500
.500
1-1/32
1-1/32
1-1/32
1-1/32
1-1/32
1-1/32
1-1/32
1-1/32
1-1/32
1-1/32
1-5/32
1-5/32
1-5/32
1-9/32
1-9/32
1-9/32
1-9/32
1-9/32
1-9/32
1-9/32
7/16
5/8
5/8
5/8
5/8
5/8
11/16
3/4
13/16
15/16
1-1/8
1-1/8
1-1/8
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
3/8
3/8
3/8
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
3/16
3/16
3/16
1/4
1/4
1/4
1/4
1/4
1/4
1/4
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#10-32
#10-32
#10-32
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
.500
.500
.500
.500
.500
.500
.500
.500
1-9/32
1-9/32
1-9/32
1-9/32
1-9/32
1-9/32
1-9/32
1-9/32
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
+.001
-.000
E
Length
Set
Screw
2-203
7
8
9
10
11
12
13
14
15
16
I
R
T
POSI-DRIVE BELTS 32 PITCH

SINGLE CORE
COLOR-DARK BLUE
MATERIAL:
Inch
Body - Molded Polyurethane

Core - Aramid Fiber or Stainless Steel
SPECIFICATIONS:
Operating Temperature Range:

-15F to +180F for AF
-65F to +180F for SS
2
3
4
5
6
Belt
Core
Aramid
Steel
STAINLESS
SPLICE
BUSHING
BELT DATA
Max. Belt
Max.
Belt Min. No. Min.
Core of Teeth Pulley Operating Speed Operating
No Load/Load
Belt
Code in Mesh Dia.
in.
ft./min.
Tension lbf
AF
SS
8
8
900/300
900/350
.500
.750
4.04
6.07
These belts are also sold by the foot, in continuous lengths

up to 100 feet.
Catalog
Number
S7912Y-C32AF Aramid Fiber

S7912Y-C32SS Stainless Steel
13/64
3/32
.0982
CIRCULAR
PITCH
CORE:
SS, STAINLESS STEEL FOR
LOWEST STRETCH...OR
AF, ARAMID FIBER FOR
HIGHEST FLEXIBILITY
Belt
Core
BALL DIA.
.049
DRIVE PINS
8
9
10
11
INCH COMPONENT
CATALOG NUMBER
S7912YC32
Aramid Fiber Core AF
Stainless Steel Core SS
Example: S7912Y-C32SS095 is a 95 Pin

Stainless Steel Drive Belt.
12
13
14
15
16
No. of
Drive Pins
2-204
No. of
Drive Pins
Pitch
Length
No. of
Drive Pins
Pitch
Length
064
080
095
112
126
128
144
158
176
189
208
220
240
252
272
283
304
315
336
346
368
377
400
408
432
6.283
7.854
9.327
10.996
12.370
12.566
14.137
15.512
17.279
18.557
20.420
21.598
23.562
24.740
26.704
27.784
29.845
30.923
32.987
33.967
36.128
37.011
39.270
40.055
42.412
440
464
471
480
496
512
528
544
560
576
592
608
624
640
656
672
688
704
720
736
752
768
784
800
43.197
45.553
46.238
47.124
48.695
50.265
51.836
53.407
54.978
56.549
58.120
59.690
61.261
62.832
64.402
65.973
67.544
69.115
70.686
72.257
73.827
75.398
76.969
78.540

SINGLE CORE
COLOR-DARK BLUE
MATERIAL:
Inch

SPECIFICATIONS:

-10F to +140F
Belt
Core
Aramid
Steel
1
2
BELT DATA
Max.
Max. Belt
Belt Min. No. Min.
Belt
No Load/Load
Code in Mesh Dia.
in.
ft./min.
Tension lbf
8
8
AF
SS
.500
.750
4
6
900/300
900/350
4
Catalog
Number
Belt
Core
S7912Y-32AF
S7912Y-32SS
Aramid Fiber
Stainless Steel
CORE:
LOWEST STRETCH & HIGHEST
SPEED...OR AF, ARAMID FIBER FOR
HIGHEST FLEXIBILITY
.0982
CIRCULAR
PITCH
3/32
13/64
5
6
7
.049
DRIVE PINS
8
INCH COMPONENT
CATALOG NUMBER
S7912Y32
No. of
Drive Pins
Example: S7912Y-32SS095 is a 95 Pin

Stainless Steel Drive Belt.
No. of
Drive Pins
Pitch
Length
No. of
Drive Pins
Pitch
Length
064
080
095
112
126
128
144
158
176
189
208
220
240
252
272
283
304
315
336
346
368
377
400
408
432
6.283
7.854
9.327
10.996
12.370
12.566
14.137
15.512
17.279
18.557
20.420
21.598
23.562
24.740
26.704
27.784
29.845
30.923
32.987
33.967
36.128
37.011
39.270
40.055
42.412
440
464
471
480
496
512
528
544
560
576
592
608
624
640
656
672
688
704
720
736
752
768
784
800
43.197
45.553
46.238
47.124
48.695
50.265
51.836
53.407
54.978
56.549
58.120
59.690
61.261
62.832
64.402
65.973
67.544
69.115
70.686
72.257
73.827
75.398
76.969
78.540
2-205
9
10
11
12
13
14
15
16
I
R
POSI-DRIVE SPROCKETS 32 PITCH

FOR SINGLE CORE POSI-DRIVE BELTS
PIN TYPE
1/8, 3/16 & 1/4 BORES
Inch
MATERIAL:
T
1
2
3
303 Stainless Steel

2024-T4 Aluminum (Chromic Acid
Anodized Before Cutting)
SPECIFICATIONS:
SPROCKET
Bore
Bore
Code
Set
Screw
1/8
3/16
1/4
125
187
250
.1248
.1873
.2498
.312
.375
.500
.090
.110
.120
.375
.406
.437
#2-56
#4-40
#6-32
E
3/64
SUB DRILL
SET SCREW
4
B +.0005
-.0000
.078
P.D. (REF.)
3/32
8
9
10
O.D. (REF.)
.187
7
INCH COMPONENT
CATALOG NUMBER
S10 12P
Aluminum A
Stainless Steel S
No. of
Teeth
Bore
Code
Example: S10A12-024P125 is a 24 Tooth 1/8"

Bore Aluminum Sprocket.
11
12
13
14
Sprocket Data
No. of
Teeth
* 014
* 015
016
018
020
022
024
026
028
030
032
036
040
048
056
064
072
080
088
096
112
128
P.D.
D
Dia.
.4375
.4687
.5000
.5625
.6250
.6875
.7500
.8125
.8750
.9375
1.0000
1.1250
1.2500
1.5000
1.7500
2.0000
2.2500
2.5000
2.7500
3.0000
3.5000
4.0000
.500
.531
.563
.625
.688
.750
.813
.875
.938
1.000
1.063
1.188
1.313
1.563
1.813
2.063
2.313
2.563
2.813
3.063
3.563
4.063
Bore Code
Availability
125
187
250
* Recommended for use as an idler only.
15
16
2-206

SPLIT HUB
1/4 BORE
R
Inch
MATERIAL:
303 Stainless Steel

T
1
2
3/64
.468
SAW SLOT
.250
+.000
.312 -.003
+.0005
.2498 -.0000
3/8
.078
FOR CLAMPS
SEE INDEX
3/32
.187
P.D. (REF.)
O.D. (REF.)
7
INCH COMPONENT
CATALOG NUMBER
S11 12P250
Aluminum A
Stainless Steel S
No. of
Teeth
Sprocket Data
No. of
Teeth
P.D.
O.D.
* 014
* 015
016
018
020
022
024
026
028
030
032
036
040
048
056
064
072
.4375
.4687
.5000
.5625
.6250
.6875
.7500
.8125
.8750
.9375
1.0000
1.1250
1.2500
1.5000
1.7500
2.0000
2.2500
.500
.531
.563
.625
.688
.750
.813
.875
.938
1.000
1.063
1.188
1.313
1.563
1.813
2.063
2.313
8
9
10
11
12
13
14
15
2-207
16
I
R
POSI-DRIVE BELTS .1475 CIRCULAR PITCH

ECONOMIC ALTERNATIVE
TO MINIATURE STEEL CHAIN
TWIN CORE
Inch
MATERIAL:
T
1
2
3
4
5

SPECIFICATIONS:

-10F to +140F
Belt
Core
Aramid
Steel
BELT DATA
Max.
Max. Belt
Belt Min. No. Min.
Belt
No Load/Load
Code in Mesh Dia.
in.
ft./min.
Tension lbf
AFT
SST
6
6
.750
.750
10
20
1300/550
1300/700
These belts are also sold by the foot,

in continuous lengths up to 100 feet.
Catalog
Number
Belt
Core
S7915Y-CPAFT Aramid Fiber

S7915Y-CPSST Stainless Steel
CORE:
SPEED...OR AF, ARAMID FIBER
FOR HIGHEST FLEXIBILITY
.1475
CIRCULAR
PITCH
6
.23
3/32
BELT THICKNESS
8
9
10
11
INCH COMPONENT
CATALOG NUMBER
S7915YCP
Aramid Fiber Core AFT
Stainless Steel Core SST
Example: S7915Y-CPSST040 is a 40 Pin

Stainless Steel Core Drive Belt.
12
13
14
15
16
No. of
Drive Pins
2-208
.067
PIN .090
No. of
Drive Pins
Pitch
Length
No. of
Drive Pins
Pitch
Length
040
050
060
070
080
090
100
110
120
130
140
150
160
170
180
190
200
210
5.900
7.375
8.850
10.325
11.800
13.275
14.750
16.225
17.700
19.175
20.650
22.125
23.600
25.075
26.550
28.025
29.500
30.975
220
230
240
250
260
270
280
290
300
310
320
330
340
350
360
370
380
390
32.450
33.925
35.400
36.825
38.350
39.825
41.300
42.775
44.250
45.725
47.200
48.675
50.150
51.625
53.100
54.575
56.050
57.525
POSI-DRIVE SPROCKETS .1475 CIRCULAR PITCH

FOR TWIN CORE POSI-DRIVE BELTS
PIN TYPE
1/8, 3/16 & 1/4 BORES
R
Inch
MATERIAL:
303 Stainless Steel

SPECIFICATIONS:
SPROCKET
Bore
Bore
Code
Set
Screw
1/8
3/16
1/4
125
187
250
.1248
.1873
.2498
.312
.375
.500
.090
.110
.120
.375
.406
.437
#2-56
#4-40
#6-32
2
O.D.
(REF.)
E
S
C
B +.001
-.000
1/16
.187
INCH COMPONENT
CATALOG NUMBER
S10 15P
No. of
Teeth
Bore
Code
P.D.
(REF.)
.079
1/16
Aluminum A
Stainless Steel S
SET
SUB DRILL PART WAY MAY BE SCREW
POSITIONED AT EITHER SIDE OF
SET SCREW
Sprocket Data
No. of
Teeth
P.D.
D
Dia.
* 010
* 011
* 012
* 013
* 014
* 015
016
017
018
019
020
022
024
025
026
028
030
032
035
036
040
045
048
050
055
060
065
085
.477
.524
.570
.616
.663
.709
.756
.803
.849
.896
.943
1.036
1.130
1.177
1.224
1.317
1.411
1.505
1.645
1.692
1.880
2.114
2.255
2.349
2.584
2.818
3.053
3.992
.529
.576
.622
.668
.715
.761
.808
.855
.901
.948
.995
1.088
1.182
1.228
1.276
1.369
1.463
1.557
1.697
1.744
1.932
2.166
2.307
2.401
2.636
2.870
3.105
4.044
Bore Code
Availability
5
6
7
8
9
10
125
11
187
250
12
13
14
15
2-209
16
I
R
POSI-DRIVE SPROCKETS .1475 CIRCULAR PITCH

SPLIT HUB
1/4 BORES
Inch
MATERIAL:
303 Stainless Steel

1
2
3
O.D.
(REF.)
.468
.250
3/8
+.001
.2498 -.000
+.000
.312 -.003
1/16
1/16
INCH COMPONENT
CATALOG NUMBER
S11 15P250
Aluminum A
Stainless Steel S
10
11
12
13
14
SAW SLOT
No. of
Teeth
Sprocket Data
No. of
Teeth
P.D.
O.D.
* 013
* 014
* 015
016
017
018
019
020
022
024
025
026
028
030
032
035
036
040
045
048
.616
.663
.709
.756
.803
.849
.896
.943
1.036
1.130
1.177
1.224
1.317
1.411
1.505
1.645
1.692
1.880
2.114
2.255
.668
.715
.761
.808
.855
.901
.948
.995
1.088
1.182
1.228
1.276
1.369
1.463
1.557
1.697
1.744
1.932
2.166
2.307
15
16
.079
.187
7
8
P.D.
(REF.)
2-210

SINGLE CORE
MATERIAL:

Inch
SPECIFICATIONS:

-10F to +140F
Belt
Core
Aramid
Steel
BELT DATA
Max.
Max. Belt
Belt Min. No. Min.
Belt
No Load/Load
Code in Mesh Dia.
in.
ft./min.
Tension lbf
AF
SS
6
6
.750
.750

Catalog
Number
Belt
Core
S7913Y-20AF
S7913Y-20SS
Aramid Fiber
Stainless Steel
5
10
1100/500
1100/600
CORE:
.15708
CIRCULAR
PITCH
.20
4
5
.08
6
3/32
BELT THICKNESS
INCH COMPONENT
CATALOG NUMBER
S7913Y20
No. of
Drive Pins
Example: S7913Y-20AF080 is an 80 Pin

Aramid Fiber Core Drive Belt.
.070 PIN
No. of
Drive Pins
Pitch
Length
No. of
Drive Pins
Pitch
Length
030
035
040
045
050
055
060
070
080
090
100
110
120
130
140
150
160
170
180
190
200
4.712
5.498
6.283
7.068
7.854
8.639
9.424
10.995
12.566
14.137
15.708
17.278
18.849
20.420
21.991
23.562
25.132
26.703
28.274
29.845
31.416
210
220
230
240
250
260
270
280
290
300
310
320
330
340
350
360
370
380
400
420
440
32.986
34.557
36.128
37.699
39.270
40.840
42.441
43.982
45.553
47.124
48.694
50.265
51.836
53.407
54.978
56.548
58.119
59.690
62.832
65.973
69.115
8
9
10
11
12
13
14
15
2-211
16
I
R

PIN TYPE
1/8, 3/16 & 1/4 BORES
Inch
MATERIAL:
T
1
2
3
303 Stainless Steel

Anodized-Before Cutting)
SPECIFICATIONS:
SPROCKET
Bore
Bore
Code
Set
Screw
1/8
3/16
1/4
125
187
250
.1248
.1873
.2498
.312
.375
.500
.090
.110
.120
.375
.406
.437
#2-56
#4-40
#6-32
SUB DRILL PART WAY MAY

BE POSITIONED AT EITHER
SIDE OF SET SCREW
E
3/64
S
SET SCREW
4
B +.001
-.000
.078
O.D. (REF.)
.187
7
8
P.D. (REF.)
3/32
INCH COMPONENT
CATALOG NUMBER
S10 13P
Aluminum A
Stainless Steel S
10
11
12
13
14
15
No. of
Teeth
Bore
Code
Sprocket Data
No. of
Teeth
P.D.
D
Dia.
* 10
* 11
* 12
* 13
* 14
* 15
16
17
18
19
20
22
24
25
26
28
30
32
35
36
40
45
50
60
70
80
.500
.550
.600
.650
.700
.750
.800
.850
.900
.950
1.000
1.100
1.200
1.250
1.300
1.400
1.500
1.600
1.750
1.800
2.000
2.250
2.500
3.000
3.500
4.000
.562
.612
.662
.712
.762
.812
.862
.912
.962
1.012
1.062
1.162
1.262
1.312
1.362
1.462
1.562
1.662
1.812
1.862
2.062
2.312
2.562
3.062
3.562
4.062
Bore Code
Availability
125
187
250
16
2-212

SPLIT HUB
1/4 BORE
R
Inch
MATERIAL:
303 Stainless Steel

T
1
2
3/64
.468
SAW SLOT
.250
+.000
.312 -.003
+.0005
.2498 -.0000
3
4
3/8
.078
FOR CLAMPS
SEE INDEX
3/32
.187
P.D. (REF.)
O.D. (REF.)
7
INCH COMPONENT
CATALOG NUMBER
S11 13P250
Aluminum A
Stainless Steel S
No. of
Teeth
Sprocket Data
No. of
Teeth
P.D.
O.D.
* 012
* 013
* 014
* 015
016
017
018
019
020
022
024
025
026
028
030
032
035
036
040
045
.600
.650
.700
.750
.800
.850
.900
.950
1.000
1.100
1.200
1.250
1.300
1.400
1.500
1.600
1.750
1.800
2.000
2.250
.662
.712
.762
.812
.862
.912
.962
1.012
1.062
1.162
1.262
1.312
1.362
1.462
1.562
1.662
1.812
1.862
2.062
2.312
8
9
10
11
12
13
14
15
2-213
16

TWIN CORE
R
T
1
2
3
4
5
MATERIAL:

Inch

-10F to +140F
Belt
Core
Aramid
Steel
BELT DATA
Max.
Max. Belt
Belt Min. No. Min.
Belt
No Load/Load
Code in Mesh Dia.
ft./min.
in.
Tension lbf
AFT
SST
6
6
.750
.750

Catalog
Number
Belt
Core
1300/550
1300/700
10
20
CORE:
.22
3/32
BELT THICKNESS
INCH COMPONENT
CATALOG NUMBER
S7914Y20
Aramid Fiber Core AFT
Stainless Steel Core SST
10
No. of
Drive Pins
Example: S7914Y-20AFT060 is a 60 Pin

Aramid Fiber Core Drive Belt.
11
12
13
14
15
16
.15708
CIRCULAR
PITCH
S7914Y-20AFT Aramid Fiber

S7914Y-20SST Stainless Steel
SPECIFICATIONS:
2-214
.067
PIN .070
No. of
Drive Pins
Pitch
Length
No. of
Drive Pins
Pitch
Length
030
035
040
045
050
055
060
070
080
090
100
110
120
130
140
150
160
170
180
190
200
4.712
5.498
6.283
7.068
7.854
8.639
9.424
10.995
12.566
14.137
15.708
17.278
18.849
20.420
21.991
23.562
25.132
26.703
28.274
29.845
31.416
210
220
230
240
250
260
270
280
290
300
310
320
330
340
350
360
370
380
400
420
440
32.986
34.557
36.128
37.699
39.270
40.840
42.441
43.982
45.553
47.124
48.694
50.265
51.836
53.407
54.978
56.548
58.119
59.690
62.832
65.973
69.115

PIN TYPE
1/8, 3/16 & 1/4 BORES
R
Inch
MATERIAL:
303 Stainless Steel

SPECIFICATIONS:
SPROCKET
Bore
Bore
Code
Set
Screw
1/8
3/16
1/4
125
187
250
.1248
.1873
.2498
.312
.375
.500
.090
.110
.120
.375
.406
.437
#2-56
#4-40
#6-32
2
O.D.
(REF.)
E
S
C
B +.001
-.000
P.D.
(REF.)
.078
1/16
1/16
SET
SCREW
SUB DRILL PART WAY
.187
INCH COMPONENT
CATALOG NUMBER
S10 14P
Aluminum A
Stainless Steel S
No. of
Teeth
Bore
Code
5
6
Sprocket Data
No. of
Teeth
P.D.
D
Dia.
* 010
* 011
* 012
* 013
* 014
* 015
016
017
018
019
020
022
024
025
026
028
030
032
035
036
040
045
050
060
070
080
.500
.550
.600
.650
.700
.750
.800
.850
.900
.950
1.000
1.100
1.200
1.250
1.300
1.400
1.500
1.600
1.750
1.800
2.000
2.250
2.500
3.000
3.500
4.000
.562
.612
.662
.712
.762
.812
.862
.912
.962
1.012
1.062
1.162
1.262
1.312
1.362
1.462
1.562
1.662
1.812
1.862
2.062
2.312
2.562
3.062
3.562
4.062
Bore Code
Availability
8
9
10
125
187
250
11
12
13
14
15
2-215
16
I
R

SPLIT HUB
1/4 BORE
Inch
MATERIAL:
303 Stainless Steel

1
2
O.D.
(REF.)
.468
.250
3/8
+.001
.2498 -.000
+.000
.312 -.003
P.D.
(REF.)
5
1/16
1/16
.079
SAW SLOT
.187
7
8
9
INCH COMPONENT
CATALOG NUMBER
S11 14P250
Aluminum A
Stainless Steel S
10
11
12
13
P.D.
O.D.
* 012
* 013
* 014
* 015
016
017
018
019
020
022
024
025
026
028
030
032
035
036
040
045
.600
.650
.700
.750
.800
.850
.900
.950
1.000
1.100
1.200
1.250
1.300
1.400
1.500
1.600
1.750
1.800
2.000
2.250
.662
.712
.762
.812
.862
.912
.962
1.012
1.062
1.162
1.262
1.312
1.362
1.462
1.562
1.662
1.812
1.862
2.062
2.312
14
15
16
No. of
Teeth
Sprocket Data
No. of
Teeth
2-216
SHAFTLOC
PATENTED

HOW SHAFTLOC WORKS:
Inch
T
1
2
Style 1
A 7Z37- series
Double-Ended
INNER SLEEVE
OUTER SLEEVE
4
Style 2
A 7Z39M - series
Single-Ended
Style 1:
Style 2:
one to contract.
5
6
Style 1
Double-Ended
INNER & OUTER
SLEEVES
ASSEMBLED
7
SHAFT
COMPONENT
8
9
Style 2
Single-Ended
Ease of assembly
Low cost
10
11
12

13
14
DID YOU KNOW?

2-217
15
16
I
R
T
SUBMINIATURE ROLLER CHAIN .1227 PITCH

MOLDED
SINGLE STRAND
SELF-LUBRICATING
Inch
MATERIAL:
Acetal Resin, Black
LUBRICATION:
1
2
3
Surface penetration with oil has been provided

and is considered to be sufficient for average service.
Some applications may be found to require additional lubrication.
The chain and sprockets have been stress-relieved and have

operating capabilities over the range of: -40F to +250F.
Sustained temperatures above +180F not recommended.
Strength derating applies at elevated temperatures.
M
P
OPERATING SPEED:
To 1000 feet per minute around 8-tooth sprockets; larger sizes higher.
S N
WEIGHT:
Approximately 1 oz. per 15 feet.
5
6
INCH COMPONENT
Catalog Number
P
Pitch
( 1/2%)
Links
Per
Foot
D
Dia.
.1227
98
.060
.062
.082
.162
Length
Code
008
009
010
020
024
050
100
Length
Feet
8
9
10
20
24
50
100
A 6M 7-12 -
7
8
9
10
11
12
13
14
15
16
Length
Code
001
002
003
004
005
006
007
Length
Feet
1
2
3
4
5
6
7
THE DESIGN
Unit-link design eliminates need for connecting link and
makes length adjustable by snap-together assembly.
Either side of the chain will run on the sprockets.
LOAD TENSION
Operates running tension loads up to 2 lbf. Sustained
static tension such as with spring loaded idlers not
recommended. Means of limiting torque and tension
should be provided. See elasticity table - long term
tension gives greater elongation.
MOMENTARY ELASTICITY TABLE
Tension Elongation Tension Elongation
ozf
Percent
ozf
Percent
12
.53
1
.10
16
.66
2
.16
32
1.10
4
.26
64
2.00
8
.40
CENTER DISTANCES
Should be adjustable, or adjustable position idlers
incorporated to compensate for pitch variation and wear.
2-218
Weight Operating
Tension
Per
Load
Foot
oz.
lbf
.067
Two Ways to Order:

1. Use Catalog Number A 6M 7-12 when specifying
any length up to 100 feet (Max.). Priced Per Foot
2. To purchase standard lengths add Length Code to
Catalog Number. Priced Per Each
SERVICE LIFE
Roller chains have very long service life if operated
within the recommended temperature range; e.g., for 10
teeth sprocket with average running tension of 8 ozf and
maximum allowable elongation of 0.85%, the service life
of the chain is approximately 3.3 million cycles.
QUALITY CONTROL
100% inspection for momentary break strength
(7 lbf minimum), thickness, width, pitch dimension
and flexibility.
APPLICATIONS-LIMITATIONS
These components are designed especially for requirements found among mechanical drives in the field of
instrumentation. Servo drives to stylus or pen carriages
in recorders and X-Y plotters, chart roll drives and
counter drives are some of the principal applications.
Operating speed is seldom a limiting factor; however, the
load, inertial impact and elasticity factors must be given
due consideration and evaluated in a typical prototype
before final application.
The data provided herein are furnished only for general
evaluation and are not necessarily indicative of specific
use adaptability.
SUBMINIATURE CHAIN SPROCKETS .1227 PITCH

MOLDED
NONMAGNETIC
SELF-LUBRICATING
NONCONDUCTIVE
R
Inch
MATERIAL:
Acetal Resin, Black
SPECIFICATION:
T
1
Nominal bore B is for press

fit on given size shaft.
2
3
B C O.D.
4
.058
Fig. 1
.052
E**
E**
.052
.058
.031
.100
.031
B C G R O.D.
INCH COMPONENT
CATALOG NUMBER
A 6M 7-12
.162
Fig. 2
Suffix Code
(from table)
Suffix Code
Nominal Bore B
No.
of
Teeth
1/8
3/16
1/4
3/8
8
9
10
12
15
16
18
20
24
30
32
36
40
48
0804
0904
1004
1204
1504
1604
1804
2004
1006
1206
1506
1606
1806
2006
2406
3006
3206
1208
1508
1608
1808
2008
2408
3008
3208
3608
4008
4808
2012
2412
3012
3212
3612
4012
4812
Fig.
Spokes P.D.*
No.
1
1
1
1
1
1
1
1
2
2
2
2
2
2
6
6
6
8
8
8
.318
.356
.394
.471
.586
.625
.702
.780
.934
1.167
1.246
1.400
1.554
1.865
D*
Dia.
Root *
.371
.409
.456
.535
.650
.690
.769
.848
1.005
1.239
1.318
1.470
1.628
1.939
.258
.296
.334
.411
.526
.565
.642
.720
.874
1.107
1.186
1.340
1.494
1.805
10
Nominal
Dimensions
C
Dia.
.236
B + 1/8
B + 1/8
B + 1/8
B + 1/8
B + 1/8
B + 1/8
B + 1/8
B + 1/8
B + 1/8
B + 1/8
B + 1/8
B + 1/8
B + 1/8
R
Dia.
.846
1.079
1.158
1.312
1.466
1.777
* Tolerance is +.00/-.01 at 75F.

** E = .312 for 1/8, 3/16 & 1/4 Bore
.375 for 3/8 Bore
G
Dia.
.746
.979
1.058
1.212
1.366
1.677
11
12
13
14
15
2-219
16
I
R
MINIATURE ROLLER CHAINS .1475 PITCH

SINGLE STRAND
RIVETED
MATERIAL:
Inch
Stainless Steel Type 18-8
FINISH:
Clear Passivated
1
2
3
4
5
6
AVERAGE TENSILE LOAD:

175 lbf
SPECIFICATION:
All lengths include and are supplied

with connecting link A 6Y 7-14CHA
WEIGHT:
CONNECTING
LINK
.035 lbs per foot
Sizes not listed are available

on special request.
CONNECTING LINK
(SNAP TYPE)
Catalog Number
A 6Y 7-14CHA
.138
.062
.1475
.072
.122
.088
BUSHING LINK
.015
Catalog Number
A 6Y 7-14BL
BUSHING .090
7
INCH COMPONENT
8
9
10
11
12
13
14
Catalog Number
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
6Y
6Y
6Y
6Y
6Y
6Y
6Y
6Y
6Y
6Y
6Y
6Y
6Y
6Y
6Y
6Y
6Y
6Y
6Y
6Y
6Y
15
16
2-220
7-M040
7-M050
7-M060
7-M070
7-M080
7-M090
7-M100
7-M110
7-M120
7-M130
7-M140
7-M150
7-M160
7-M170
7-M180
7-M190
7-M200
7-M210
7-M220
7-M230
7-M240
No.
of
Links
Length
40
50
60
70
80
90
100
110
120
130
140
150
160
170
180
190
200
210
220
230
240
5.900
7.375
8.850
10.325
11.800
13.275
14.750
16.225
17.700
19.175
20.650
22.125
23.600
25.075
26.550
28.025
29.500
30.975
32.450
33.925
35.400
SPROCKETS FOR ROLLER CHAIN .1475 PITCH

MINIATURE
MATERIAL:
300 Series Stainless Steel
Inch
FINISH:
Clear Passivated
SPECIFICATION:
T
1
Ladder Chain A 6Y 8M375 can be

used with these chain sprockets.
See Metric Catalog D805 page 2-220.
2
E
SET
SCREW
SET
SCREW
4
C
P.D. O.D.
.109
.062
.031
.062
Fig. 2
Fig. 1
INCH COMPONENT
Catalog Number
No
of
Teeth
P.D.
O.D.
B
Bore
C
Dia.
Set Screw
&
Sub Drill
+.001
-.000
Fig. 1
Fig. 2
A
A
A
A
A
A
A
A
A
A
A
A
6X
6X
6X
6X
6X
6X
6X
6X
6X
6X
6X
6X
7-1407
7-1408
7-1409
7-1410
7-1412
7-1415
7-1416
7-1418
7-1420
7-1420A
7-1424
7-1428
7
8
9
10
12
15
16
18
20
20
24
28
.340
.385
.431
.477
.570
.709
.756
.849
.943
.943
1.130
1.317
.392
.437
.483
.529
.622
.761
.808
.901
.995
.995
1.182
1.369
.0937
.125
.125
.125
.125
.1875
.1875
.1875
.1875
.250
.250
.250
11/32
11/32
11/32
11/32
11/32
11/32
11/32
11/32
13/32
13/32
13/32
13/32
* 15/64
* 9/32
* 21/64
* 3/8
25/64
17/32
9/16
21/32
3/4
3/4
3/4
3/4
#2-56 / .029
#2-56 / .029
#2-56 / .029
#2-56 / .029
#2-56 / .029
#4-40 / .040
#4-40 / .040
#4-40 / .040
#4-40 / .040
#4-40 / .040
#6-32 / .070
#6-32 / .070
A
A
A
A
A
6X
6X
6X
6X
6X
7-1430
7-1434
7-1436
7-1440
7-1448
30
34
36
40
48
1.411
1.598
1.692
1.880
2.255
1.463
1.650
1.744
1.932
2.307
.250
.250
.250
.250
.250
13/32
13/32
13/32
13/32
13/32
3/4
3/4
3/4
3/4
3/4
#6-32 / .070
#6-32 / .070
#6-32 / .070
#6-32 / .070
#6-32 / .070
* Hubs are grooved 3/32 wide next to the sprockets to provide clearance for chain.
8
9
10
11
12
13
14
15
2-221
16
I
R
T
1
2
3
ROLLER CHAIN & SPROCKETS .1475 PITCH

MOLDED
MINIATURE
SINGLE STRAND
NONCONDUCTIVE
NONMAGNETIC
SELF-LUBRICATING
Inch
MATERIAL:
Roller Chain - Nylatron GS

Sprocket - Nylatron GS
SPECIFICATIONS:
For larger pitch plastic roller chain and

sprockets see pages 2-224, 2-230 and 2-232
Also available in acetal, different bores,
hub features and hubless, on special order.
.375
.191
.072
O.D. P.D.
.089
B C
.046
.108
P
.062
Fig. 1
Fig. 2
INCH COMPONENT
7
8
9
10
11
12
13
14
Catalog Number
Fig. 1 Roller Chain - Priced Per Foot
A 6M 7-MT
Catalog Number
Fig. 2 Sprockets
A 6M 7-1407
A 6M 7-1408
A 6M 7-1409
A 6M 7-1410
A 6M 7-1412
A 6M 7-1413
A 6M 7-1414
A 6M 7-1415
A 6M 7-1416
A 6M 7-1417
A 6M 7-1418
A 6M 7-1419
A 6M 7-1420
A 6M 7-1421
A 6M 7-1422
A 6M 7-1423
A 6M 7-1424
15
16
2-222
No.
of P.D.
Teeth
7
8
9
10
12
13
14
15
16
17
18
19
20
21
22
23
24
.340
.385
.431
.477
.570
.616
.663
.709
.756
.803
.849
.896
.943
.990
1.036
1.083
1.130
P
Pitch
Links
Per
Foot
.1475
81.3
B
C
O.D. Bore
Dia.
.392
.437
.483
.529
.622
.668
.715
.761
.808
.855
.901
.948
.995
1.042
1.088
1.135
1.182
.093
.125
.125
.125
.125
.1875
.1875
.1875
.1875
.1875
.1875
.1875
.250
.250
.250
.250
.250
3/16
7/32
1/4
1/4
1/4
3/8
3/8
1/2
1/2
1/2
1/2
1/2
5/8
5/8
5/8
5/8
5/8
Catalog Number
Fig. 2 Sprockets
A 6M 7-1425
A 6M 7-1426
A 6M 7-1427
A 6M 7-1428
A 6M 7-1429
A 6M 7-1430
A 6M 7-1431
A 6M 7-1432
A 6M 7-1433
A 6M 7-1434
A 6M 7-1435
A 6M 7-1436
A 6M 7-1438
A 6M 7-1440
A 6M 7-1442
A 6M 7-1444
A 6M 7-1452
Weight
Per
Foot
oz.
.093
No.
of P.D.
Teeth
25
26
27
28
29
30
31
32
33
34
35
36
38
40
42
44
52
1.177
1.224
1.270
1.317
1.364
1.411
1.458
1.505
1.552
1.598
1.645
1.692
1.786
1.880
1.974
2.068
2.443
B
C
O.D. Bore
Dia.
1.228
1.276
1.322
1.369
1.416
1.463
1.510
1.557
1.604
1.650
1.697
1.744
1.838
1.932
2.026
2.120
2.495
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
ROLLER CHAINS & LINKS .250 PITCH

SINGLE STRAND
RIVETED

P
MATERIAL:
Inch
.232
Stainless Steel
Hardened Steel
.13
.125
T
1
.125
.09
LOCK
A
.125
Fig.1
Roller
Connecting
Link
.09
Fig. 2
Single Offset
Connecting
Link
BODY
A
A
.13
.232
COTTER PIN FOR

HEAVY-DUTY TYPE.
RETAINING RING FOR
STANDARD-DUTY TYPE.
LINK
5
Fig. 3
Spring Clip
Connecting
Link
INCH COMPONENT
Catalog Number
Material
L
D
A
P
Pin +.002
Pitch Thickness Length
-.000
Roller Chain - Standard-Duty Type - Priced Per Foot

A 6Q 7-25
Hardened Steel
.25
A 6Y 7-25
Stainless Steel
.25
Roller Chain
(Ref.)
.03
.03
.34
.34
Roller
(Fig. 1)
Material
.19
.19
Tensile Weight
Per
Load Foot
lbf
lb./ft.
.31
.31
.33
.33
787
562
.1
.1
Spring Clip
(Fig. 3)
Single Offset
(Fig. 2)
Connecting Links - For Standard-Duty Type Roller Chain - Priced Per Piece
A 6Q 7-25RL
A 6Q 7-25OSCLS
A 6Q 7-25
Hardened Steel
A 6Y 7-25RL
A 6Y 7-25OSCLS
A 6Y 7-25
Stainless Steel
A 6Q 7-25SCCL
A 6Y 7-25SCCL
Material
L
D
A
P
Pin +.002
Pitch Thickness Length
-.000
Roller Chain - Heavy-Duty Type - Priced Per Foot

A 6Q 7-H25
Hardened Steel
.25
A 6Y 7-H25
Stainless Steel
.25
Roller Chain
(Ref.)
8
9
10
11
INCH COMPONENT
Catalog Number
Material
.039
.039
.43
.43
Roller
(Fig. 1)
Connecting Links - For Heavy-Duty Type Roller Chain - Priced Per Piece
A 6Q 7-H25RL
A 6Q 7-H25
Hardened Steel
A 6Y 7-H25RL
A 6Y 7-H25
Stainless Steel
.21
.21
Weight
Tensile Per
Load Foot
lbf
12
lb./ft.
.35
.35
.38
.38
1169
562
.107
.107
13
Single Offset
(Fig. 2)
Spring Clip
(Fig. 3)
14
A 6Q 7-H25OSCLS
A 6Y 7-H25OSCLS
A 6Q 7-H25SCCL
A 6Y 7-H25SCCL
15
2-223
16
I
R
PLASTIC ROLLER CHAINS

MOLDED
1/4, 3/8 & 1/2 PITCH
Inch
MATERIAL:
T
1
2
Nylatron GS
Acetal
Polypropylene
Polyvinylidene
TEMPERATURE RANGE:
Nylaton GS
Acetal
Polypropylene
Polyvinylidene
-40F to +250F
-40F to +180F
-30F to +180F
-50F to +140F
F
L
SPECIFICATION:
For 1/4 & 3/8 pitch ladder chains,

see index.
C
Fig. 1
4
5
F
C
Fig. 2
8
INCH COMPONENT
Catalog Number
9
Nylatron GS
10
11
12
13
14

A 6M 7-25
A 6M 7-25ACE
A 6M 7-25PLP
A 6M 7-37
A 6M 7-37ACE
A 6M 7-37PLP
A 6M 7-50
A 6M 7-50ACE
A 6M 7-50PLP
A 6M 7-25F
Nylatron GS
Acetal
2-224
D
Dia.
C
Dia.
1/4
3/8
1/2
1/8
3/16
5/16
.130
.200
5/16
.105
.141
.156
.040
.075
.088
.359
.545
.725
1/4
1/8
1/8
.094
.037
.356
Polypropylene Polyvinylidene

A 6M 7-25
A 6M 7-25ACE
A 6M 7-25PLP
A 6M 7-37
A 6M 7-37ACE
A 6M 7-37PLP
A 6M 7-50
A 6M 7-50ACE
A 6M 7-50PLP
A 6M 7-25F
A 6M 7-50PLV
Catalog Number (Ref. Only)
15
16
Acetal
P
Pitch
Polypropylene Polyvinylidene Nom.
Ultimate
Tensile
Load
Max.
Speed
lbf
ft./min.
A 6M 7-50PLV
.25
.35
.46
65
136
173
4000
4000
3000
.25
65
4000

FOR NO .25 SINGLE STRAND CHAINS
.110 FACE
MATERIAL:
Inch
303 Stainless Steel
SPECIFICATION:
These sprockets can be used with

standard #25, 1/4 pitch roller or ladder chains.
T
1
2
3
D
.110
5
O.D. P.D.
7
8
INCH COMPONENT
Catalog Number
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
6X
6X
6X
6X
6X
6X
6X
6X
6X
6X
6X
6X
6X
6X
6X
6X
6X
6X
7-2509
7-2510
7-2511
7-2512
7-2513
7-2514
7-2515
7-2516
7-2517
7-2518
7-2519
7-2520
7-2525
7-2530
7-2536
7-2540
7-2545
7-2560
No.
of
Teeth
P.D.
O.D.
(Ref.)
B
Bore
E
Length
C
Hub
Dia.
D
Hub
Proj.
9
10
11
12
13
14
15
16
17
18
19
20
25
30
36
40
45
60
.731
.809
.887
.966
1.045
1.123
1.202
1.281
1.361
1.440
1.519
1.598
1.995
2.392
2.868
3.186
3.584
4.777
.84
.92
1.00
1.08
1.17
1.24
1.33
1.41
1.49
1.57
1.65
1.73
2.13
2.53
3.01
3.33
3.73
4.92
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
.375
.375
.375
.500
.500
.500
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
5/8
5/8
5/8
3/4
3/4
3/4
3/4
13/32
31/64
9/16
21/32
23/32
13/16
7/8
31/32
1-1/16
1-1/8
1-7/32
1-9/32
1-11/16
2-3/32
2-3/32
2-13/32
2-13/32
2-13/32
.39
.39
.39
.39
.39
.39
.39
.39
.39
.39
.39
.51
.51
.51
.64
.64
.64
.64
9
10
11
12
13
14
15
2-225
16

FOR NO. 25 SINGLE STRAND CHAINS
.110 FACE
MATERIAL:
Inch
Steel
These sprockets can be used with #25,

1/4" pitch roller or ladder chains.
E
D
.110
O.D. P.D.
B C
SET SCREW
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
6C
6C
6C
6C
6C
6C
6C
6C
6C
6C
6C
6C
6C
6C
6C
6C
6C
6C
6C
6C
6C
6C
6C
6C
6C
6C
6C
6C
6C
6C
7-25B09
7-25B10
7-25B11
7-25B12
7-25B13
7-25B14
7-25B15
7-25B16
7-25B17
7-25B18
7-25B19
7-25B20
7-25B21
7-25B22
7-25B23
7-25B24
7-25B25
7-25B26
7-25B28
7-25B30
7-25B31
7-25B32
7-25B36
7-25B40
7-25B45
7-25B48
7-25B54
7-25B60
7-25B70
7-25B72
2
3
4
INCH COMPONENT
Catalog Number
No.
of
Teeth
P.D.
O.D.
(Ref.)
B
Bore
E
Length
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
28
30
31
32
36
40
45
48
54
60
70
72
.731
.809
.887
.966
1.045
1.124
1.203
1.282
1.361
1.440
1.519
1.598
1.678
1.757
1.836
1.915
1.995
2.074
2.233
2.392
2.471
2.551
2.869
3.187
3.584
3.823
4.300
4.777
5.572
5.732
.84
.92
1.00
1.08
1.16
1.25
1.33
1.41
1.49
1.57
1.65
1.73
1.81
1.89
1.97
2.05
2.13
2.21
2.37
2.53
2.61
2.69
3.01
3.33
3.73
3.96
4.44
4.92
5.72
5.88
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
3/4
3/4
3/4
3/4
3/4
3/4
3/4
C
Hub
D
Hub
Proj.
Set
Screw
7/16
1/2
9/16
5/8
23/32
13/16
7/8
31/32
1-1/32
1-1/8
1-7/32
1-9/32
1-3/8
1-7/16
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
2
2
2
2
2
2
2
25/64
25/64
25/64
25/64
25/64
25/64
25/64
25/64
25/64
25/64
25/64
33/64
33/64
33/64
33/64
33/64
33/64
33/64
33/64
33/64
33/64
33/64
33/64
41/64
41/64
41/64
41/64
41/64
41/64
41/64
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
#10-32
#10-32
#10-32
#10-32
#10-32
#10-32
#10-32
#10-32
#10-32
#10-32
#10-32
#10-32
#10-32
#10-32
#10-32
#10-32
#10-32
#10-32
#10-32
#10-32
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
5
6
7
8
9
10
11
12
13
14
15
2-226
REV: 08.10.12 mh
16

.110 FACE
R
Inch
MATERIAL:
Steel

T
1
O.D. P.D.
.110 +.000
-.007
INCH COMPONENT
Catalog Number
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
6C
6C
6C
6C
6C
6C
6C
6C
6C
6C
6C
6C
6C
6C
6C
6C
6C
6C
6C
6C
6C
6C
6C
6C
6C
6C
6C
6C
6C
6C
6C
6C
6C
6C
6C
6C
6C
6C
7-25009
7-25010
7-25011
7-25012
7-25013
7-25014
7-25015
7-25016
7-25017
7-25018
7-25019
7-25020
7-25021
7-25022
7-25023
7-25024
7-25025
7-25026
7-25027
7-25028
7-25029
7-25030
7-25031
7-25032
7-25033
7-25034
7-25035
7-25036
7-25037
7-25038
7-25039
7-25040
7-25041
7-25042
7-25043
7-25044
7-25045
7-25046
No.
of
Teeth
P.D.
O.D.
(Ref.)
B
Bore
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
.731
.809
.887
.966
1.045
1.124
1.203
1.282
1.361
1.440
1.519
1.598
1.678
1.757
1.836
1.915
1.995
2.074
2.153
2.233
2.312
2.392
2.471
2.551
2.630
2.710
2.789
2.869
2.948
3.027
3.107
3.187
3.266
3.345
3.425
3.504
3.584
3.663
.84
.92
1.00
1.08
1.16
1.25
1.33
1.41
1.49
1.57
1.65
1.73
1.81
1.89
1.97
2.05
2.13
2.21
2.29
2.37
2.45
2.53
2.61
2.69
2.77
2.85
2.93
3.01
3.09
3.17
3.25
3.33
3.41
3.49
3.57
3.65
3.73
3.81
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
.375
.375
.375
.375
.375
.375
.375
.375
.375
.375
.375
.375
.375
.375
.375
.375
.375
.500
.500
.500
.500
.500
.500
2-227
5
6
7
8
9
10
11
12
13
14
15
16
I
R

.110 FACE
Inch
MATERIAL:
Steel

1
2
O.D. P.D.
3
.110 +.000
-.007
4
5
INCH COMPONENT
Catalog Number
6
7
8
9
10
11
12
13
14
15
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
6C
6C
6C
6C
6C
6C
6C
6C
6C
6C
6C
6C
6C
6C
6C
6C
6C
6C
6C
6C
6C
6C
6C
6C
6C
6C
6C
6C
6C
6C
6C
6C
6C
6C
6C
6C
7-25047
7-25048
7-25049
7-25050
7-25051
7-25052
7-25053
7-25054
7-25055
7-25056
7-25057
7-25058
7-25059
7-25060
7-25061
7-25062
7-25063
7-25064
7-25065
7-25066
7-25067
7-25068
7-25069
7-25070
7-25072
7-25075
7-25076
7-25078
7-25080
7-25085
7-25090
7-25095
7-25100
7-25110
7-25120
7-25125
No.
of
Teeth
P.D.
O.D.
(Ref.)
B
Bore
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
72
75
76
78
80
85
90
95
100
110
120
125
3.743
3.823
3.902
3.981
4.061
4.141
4.220
4.300
4.379
4.459
4.538
4.618
4.697
4.777
4.856
4.936
5.015
5.095
5.175
5.254
5.334
5.413
5.493
5.572
5.731
5.970
6.050
6.209
6.368
6.766
7.163
7.561
7.959
8.755
9.550
9.948
3.89
3.96
4.04
4.12
4.20
4.28
4.36
4.44
4.52
4.60
4.68
4.76
4.84
4.92
5.00
5.08
5.16
5.24
5.32
5.40
5.48
5.56
5.64
5.72
5.88
6.12
6.19
6.35
6.51
6.91
7.31
7.71
8.11
8.90
9.70
10.10
.500
.500
.500
.500
.500
.500
.500
.500
.500
.500
.500
.500
.500
.500
.500
.500
.500
.500
.500
.500
.500
.500
.500
.500
.500
.500
.500
.500
.500
.500
.500
.500
.500
.500
.500
.500
16
2-228

NO. 25 SINGLE STRAND CHAINS
MOLDED
.110 FACE
R
Inch
MATERIAL:
Molded Nylon, Fiberglass Reinforced
SPECIFICATION:
All these sprockets can be used

with #25, 1/4 pitch roller or ladder chains.
.110
(Undercut
B C For Chain)
O.D. P.D.
#10-24
SET
SCREW
.12
E
D
.110
B C
O.D. P.D.
#10-24
SET SCREW
INCH COMPONENT
.110
Fig. 3
B
Bore
#10-24
D/2 SET
SCREW
RIBS ON
BOTH SIDES
Fig. 4
D
Hub
Proj.
.2505
.2505
.2505
.2505
.2505
35/64
35/64
35/64
35/64
35/64
13/16
13/16
13/16
13/16
13/16
5/16
5/16
5/16
5/16
5/16
1.250
1.332
.2505
.2505
27/64
27/64
13/16
13/16
5/16
5/16
1.281
1.360
1.439
1.519
1.598
1.677
1.757
1.915
2.074
2.233
2.392
1.412
1.493
1.573
1.654
1.731
1.813
1.892
2.052
2.214
2.368
2.529
.2505
.2505
.2505
.2505
.2505
.2505
.2505
.2505
.2505
.2505
.2505
27/64
27/64
27/64
27/64
27/64
27/64
27/64
27/64
27/64
27/64
27/64
1
1
1
1
1
1
1
1
1
1
1
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
2.550
2.868
3.186
3.583
3.822
2.686
3.003
3.319
3.716
3.955
.2505
.2505
.2505
.2505
.2505
37/64
37/64
37/64
37/64
37/64
1
1
1
1
1
5/16
5/16
5/16
5/16
5/16
7-2509
7-2510
7-2511
7-2512
7-2513
9
10
11
12
13
.731
.809
.887
.966
1.044
.850
.931
1.010
1.092
1.170
A 6T 7-2514
A 6T 7-2515
14
15
1.123
1.202
A
A
A
A
A
A
A
A
A
A
A
6T
6T
6T
6T
6T
6T
6T
6T
6T
6T
6T
7-2516
7-2517
7-2518
7-2519
7-2520
7-2521
7-2522
7-2524
7-2526
7-2528
7-2530
16
17
18
19
20
21
22
24
26
28
30
A
A
A
A
A
6T
6T
6T
6T
6T
7-2532
7-2536
7-2540
7-2545
7-2548
32
36
40
45
48
+.0015
-.0000
5
6
7
C
Hub
Dia.
O.D.
3
4
E
Length
P.D.
B C
O.D. P.D.
#10-24
SET
SCREW
.110
No.
of
Teeth
Catalog Number
D/2
O.D. P.D. B
Fig. 2
Fig. 1
E
D
D/2
D/2
Fig. 1
Fig. 2
Fig. 3
Fig. 4
A
A
A
A
A
6T
6T
6T
6T
6T
2-229
9
10
11
12
13
14
15
16
I
R
T

MOLDED
FOR NO. 25 SINGLE STRAND CHAINS
.110 FACE
Inch
MATERIAL:
Acetal Resin, White
SPECIFICATION:

1/4 pitch roller or ladder chains.
2
.36
1/4
3
4
O.D. P.D.
B C
5
.110
6
7
8
9
10
INCH COMPONENT
Catalog Number
A
A
A
A
A
A
A
A
A
A
A
A
A
A
6M
6M
6M
6M
6M
6M
6M
6M
6M
6M
6M
6M
6M
6M
11
12
13
14
15
16
2-230
7-2510
7-2512
7-2515
7-2516
7-2517
7-2518
7-2519
7-2520
7-2524
7-2525
7-2530
7-2532
7-2536
7-2540
No.
of
Teeth
P.D.
O.D.
B
Bore
C
Hub
Dia.
10
12
15
16
17
18
19
20
24
25
30
32
36
40
.809
.966
1.203
1.282
1.361
1.440
1.519
1.598
1.915
1.995
2.392
2.551
2.869
3.187
.92
1.08
1.33
1.41
1.49
1.57
1.65
1.73
2.05
2.13
2.53
2.69
3.01
3.33
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
5/16
5/16
5/16
3/8
3/8
3/8
31/64
39/64
39/64
39/64
39/64
39/64
39/64
39/64
39/64
43/64
43/64
43/64
43/64
43/64
ROLLER CHAIN & LINK .375 PITCH

SINGLE STRAND
RIVETED
MATERIAL:
Inch
Stainless Steel
Also see p. 2-224

for plastic roller chains in
3/8" and 1/2" pitches.
T
1
2
CONNECTING LINK
(not included)
.259
.225
.278
.05
1/4
3/8
.129
.323
5
INCH COMPONENT
Catalog Number
Average Tensile
Load
Average Weight
Per Foot
Roller Chain - Priced Per Foot

A 6Y77-37
1236
.276
lbf
lb./ft.
7
8
9
INCH COMPONENT
Catalog Number
Connecting Link (For Roller Chain)
A 6Y77-37SCCL
Type of
Connecting Link
10
Spring Clip
11
12
13
14
15
2-231
16
I
R
SPROCKETS FOR ROLLER CHAIN

MOLDED
3/8 & 1/2 PITCH
Inch
MATERIAL:
Nylatron GS, Fiberglass Reinforced

Acetal
SPECIFICATIONS:
1
2
For 1/4 pitch molded sprockets,

see index.
For 3/8 Pitch X = .16
1/2 Pitch X = .28
E
3
O.D. P.D.
4
5
6
7
8
9
10
11
12
13
14
15
16
B C
INCH COMPONENT
Catalog Number
No.
of
Teeth
3/8" Pitch - Nylatron GS Fiberglass Reinforced

9
A 6M 7-3709
10
A 6M 7-3710
11
A 6M 7-3711
12
A 6M 7-3712
14
A 6M 7-3714
15
A 6M 7-3715
16
A 6M 7-3716
18
A 6M 7-3718
20
A 6M 7-3720
24
A 6M 7-3724
26
A 6M 7-3726
30
A 6M 7-3730
35
A 6M 7-3735
36
A 6M 7-3736
40
A 6M 7-3740
45
A 6M 7-3745
1/2" Pitch - Nylatron GS Fiberglass Reinforced
9
A 6M 7-5009
10
A 6M 7-5010
12
A 6M 7-5012
15
A 6M 7-5015
16
A 6M 7-5016
24
A 6M 7-5024
32
A 6M 7-5032
1/2" Pitch - Acetal
13
A 6M 7-Z5013
15
A 6M 7-Z5015
17
A 6M 7-Z5017
19
A 6M 7-Z5019
21
A 6M 7-Z5021
23
A 6M 7-Z5023
25
A 6M 7-Z5025
2-232
P.D.
O.D.
Ref.
B
Bore
C
Dia.
1.096
1.214
1.331
1.449
1.685
1.804
1.922
2.159
2.397
2.873
3.111
3.588
4.183
4.303
4.780
5.376
1.25
1.38
1.50
1.62
1.85
1.99
2.11
2.35
2.59
3.07
3.31
3.79
4.39
4.51
4.99
5.58
3/8
3/8
3/8
3/8
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
5/8
5/8
5/8
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
7/8
7/8
7/8
7/8
7/8
7/8
7/8
1
5/8
3/4
7/8
1
1-1/4
1-3/8
1-1/2
1-11/16
1-13/16
2
2-15/64
2-1/4
2-1/4
2-1/4
2-3/4
2-3/4
1.462
1.618
1.932
2.405
2.563
3.831
5.101
1.67
1.84
2.17
2.65
2.81
4.10
5.38
1/2
1/2
1/2
1/2
5/8
5/8
3/4
7/8
7/8
7/8
7/8
53/64
1
1
7/8
1-1/8
1-3/8
1-7/8
1-7/8
2-1/2
2
2.09
2.40
2.72
3.04
3.35
3.67
3.99
2.28
2.60
2.91
3.23
3.56
3.88
4.21
1/2
1/2
1/2
1/2
5/8
5/8
5/8
25/32
25/32
1
1
1
1
1
1-7/64
1-7/64
1-1/4
1-1/4
1-13/32
1-13/32
1-13/32
LADDER CHAINS & SPROCKETS .167 PITCH

SIZE 21
.065 FACE
R
Inch
MATERIAL:
Ladder Chain - Steel, Tinned, High-Tensile Steel or Stainless Steel

Sprocket - Acetal, Black
T
1
SPECIFICATIONS:
Sprockets with:

.125
#2-56
.1875
#4-40
.250
#6-32
SET SCREW
.125
.065
O.D. P.D. C
A
SPOT DRILL
.310
Fig. 1
Fig. 2
INCH COMPONENT
Catalog Number
Material
Fig. 1 Ladder Chains - Priced Per Foot

Steel, Tinned
A 6C 8-21
High-Tensile Steel
A 6C88-21
Stainless Steel
A 6Y 8-21
Catalog Number
No.
of P.D.
Teeth
Fig. 2 Sprockets
A 6Z 8-211004
A 6Z 8-211006
A 6Z 8-211204
A 6Z 8-211206
A 6Z 8-211304
A 6Z 8-211306
A 6Z 8-211404
A 6Z 8-211406
A 6Z 8-211504
A 6Z 8-211506
A 6Z 8-211604
A 6Z 8-211606
A 6Z 8-211608
A 6Z 8-211804
A 6Z 8-211806
A 6Z 8-211808
A 6Z 8-212004
A 6Z 8-212006
A 6Z 8-212008
10
10
12
12
13
13
14
14
15
15
16
16
16
18
18
18
20
20
20
.540
.540
.646
.646
.697
.697
.749
.749
.802
.802
.855
.855
.855
.960
.960
.960
1.066
1.066
1.066
P
Pitch
Links
Per
Foot
A
Wire
Dia.
C
Outside
Width
D
Inside
Width
Yield
Point
.167
.167
.167
72
72
72
.032
.032
.032
.222
.222
.222
.080
.080
.080
18
35
18
B
C
O.D. Bore
Hub
+.001
-.000 Dia.
.66
.66
.78
.78
.83
.83
.88
.88
.94
.94
.99
.99
.99
1.09
1.09
1.09
1.20
1.20
1.20
.125
.1875
.125
.1875
.125
.1875
.125
.1875
.125
.1875
.125
.1875
.250
.125
.1875
.250
.125
.1875
.250
.370
.370
.370
.370
.370
.370
.370
.370
.370
.370
.490
.490
.490
.490
.490
.490
.490
.490
.490
Catalog Number
Fig. 2 Sprockets
A 6Z 8-212106
A 6Z 8-212108
A 6Z 8-212206
A 6Z 8-212208
A 6Z 8-212406
A 6Z 8-212408
A 6Z 8-212506
A 6Z 8-212508
A 6Z 8-213006
A 6Z 8-213008
A 6Z 8-213206
A 6Z 8-213208
A 6Z 8-213606
A 6Z 8-213608
A 6Z 8-214006
A 6Z 8-214008
A 6Z 8-214806
A 6Z 8-214808
No.
of P.D.
Teeth
21
21
22
22
24
24
25
25
30
30
32
32
36
36
40
40
48
48
1.119
1.119
1.172
1.172
1.277
1.277
1.330
1.330
1.595
1.595
1.701
1.701
1.913
1.913
2.125
2.125
2.549
2.549
B
C
Hub
O.D. Bore
+.001
-.000 Dia.
1.25
1.25
1.30
1.30
1.41
1.41
1.46
1.46
1.73
1.73
1.84
1.84
2.05
2.05
2.26
2.26
2.68
2.68
.1875
.250
.1875
.250
.1875
.250
.1875
.250
.1875
.250
.1875
.250
.1875
.250
.1875
.250
.1875
.250
2-233
REV: 01.09.12 mh
lbf
.490
.490
.490
.490
.490
.490
.490
.490
.490
.490
.490
.490
.490
.490
.490
.490
.490
.490
7
8
9
10
11
12
13
14
15
16
I
R
T
1

SIZE 21
MOLDED
.065 FACE
Inch
MATERIAL:
Ladder Chain - Steel, Tinned, High-Tensile Steel or Stainless Steel

SPECIFICATION:
Use straight knurl on shafting

for maximum torques.
.065
P
C
O.D. P.D. C
B*
A
.31
4
5
6
7
8
9
10
11
12
13
14
15
Fig. 1
INCH COMPONENT
Catalog Number
Material

Steel, Tinned
A 6C 8-21
High-Tensile Steel
A 6C88-21
Stainless Steel
A 6Y 8-21
Catalog Number
Fig. 2 Sprockets
A 6M 8-210604
A 6M 8-210804
A 6M 8-210904
A 6M 8-211004
A 6M 8-211006
A 6M 8-211008
A 6M 8-211204
A 6M 8-211206
A 6M 8-211208
A 6M 8-211304
A 6M 8-211306
A 6M 8-211308
A 6M 8-211404
A 6M 8-211406
A 6M 8-211408
A 6M 8-211504
A 6M 8-211506
A 6M 8-211508
A 6M 8-211604
A 6M 8-211606
A 6M 8-211608
A 6M 8-211612
A 6M 8-211804
A 6M 8-211806
A 6M 8-211808
A 6M 8-211812
A 6M 8-212004
No.
of P.D.
Teeth
6
8
9
10
10
10
12
12
12
13
13
13
14
14
14
15
15
15
16
16
16
16
18
18
18
18
20
.334
.436
.488
.540
.540
.540
.646
.646
.646
.697
.697
.697
.749
.749
.749
.802
.802
.802
.855
.855
.855
.855
.960
.960
.960
.960
1.066
1/8
1/8
1/8
1/8
3/16
1/4
1/8
3/16
1/4
1/8
3/16
1/4
1/8
3/16
1/4
1/8
3/16
1/4
1/8
3/16
1/4
3/8
1/8
3/16
1/4
3/8
1/8
* Bore is sized for press fit on standard shafting.
16
2-234
P
Pitch
Links
Per
Foot
A
Wire
Dia.
C
Outside
Width
D
Inside
Width
Yield
Point
.167
.167
.167
72
72
72
.032
.032
.032
.222
.222
.222
.080
.080
.080
18
35
18
B*
C
O.D. Bore Hub
Nom. Dia.
.47
.56
.61
.66
.66
.66
.78
.78
.78
.83
.83
.83
.88
.88
.88
.94
.94
.94
.99
.99
.99
.99
1.09
1.09
1.09
1.09
1.20
Fig. 2
.246
.246
.246
.246
.310
.370
.246
.310
.370
.246
.310
.370
.246
.310
.370
.246
.310
.370
.246
.310
.370
.490
.246
.310
.370
.490
.246
Catalog Number
Fig. 2 Sprockets
A 6M 8-212006
A 6M 8-212008
A 6M 8-212012
A 6M 8-212106
A 6M 8-212108
A 6M 8-212112
A 6M 8-212206
A 6M 8-212208
A 6M 8-212212
A 6M 8-212406
A 6M 8-212408
A 6M 8-212412
A 6M 8-212506
A 6M 8-212508
A 6M 8-212512
A 6M 8-213006
A 6M 8-213008
A 6M 8-213012
A 6M 8-213208
A 6M 8-213212
A 6M 8-213608
A 6M 8-213612
A 6M 8-214008
A 6M 8-214012
A 6M 8-214808
A 6M 8-214812
No.
of P.D.
Teeth
20
20
20
21
21
21
22
22
22
24
24
24
25
25
25
30
30
30
32
32
36
36
40
40
48
48
1.066
1.066
1.066
1.119
1.119
1.119
1.172
1.172
1.172
1.277
1.277
1.277
1.330
1.330
1.330
1.595
1.595
1.595
1.701
1.701
1.913
1.913
2.125
2.125
2.549
2.549
lbf
B*
C
O.D. Bore Hub
Nom. Dia.
1.20
1.20
1.20
1.25
1.25
1.25
1.30
1.30
1.30
1.41
1.41
1.41
1.46
1.46
1.46
1.73
1.73
1.73
1.84
1.84
2.05
2.05
2.26
2.26
2.68
2.68
3/16
1/4
3/8
3/16
1/4
3/8
3/16
1/4
3/8
3/16
1/4
3/8
3/16
1/4
3/8
3/16
1/4
3/8
1/4
3/8
1/4
3/8
1/4
3/8
1/4
3/8
.310
.370
.490
.310
.370
.490
.310
.370
.490
.310
.370
.490
.310
.370
.490
.310
.370
.490
.370
.490
.370
.490
.370
.490
.370
.490

SIZE 19
.087 FACE
MATERIAL:
Inch
Ladder Chain - Steel, Brass, High-Tensile Steel

or Stainless Steel
Sprocket - Steel
SPECIFICATIONS:
T
1
Sprockets with:
7 & 8 teeth have a #8-32 set screw
9 to 24 teeth have a #10-32 set screw
.087
D/2
P
D
B C
P.D.
SET SCREW
Fig. 1
Fig. 2
INCH COMPONENT
Catalog Number
Material

Steel
A 6C 8-19
High-Tensile Steel
A 6C88-19
Brass
A 6B 8-19
Stainless Steel
A 6Y 8-19
Catalog Number
Fig. 2 Sprockets
A 6C 8-1907
A 6C 8-1908
A 6C 8-1909
A 6C 8-1910
A 6C 8-1912
A 6C 8-1914
A 6C 8-1916
A 6C 8-1920
A 6C 8-1924
P
Pitch
Links
Per
Foot
A
Wire
Dia.
C
Outside
Width
D
Inside
Width
Yield
Point
.185
.185
.185
.185
65
65
65
65
.041
.041
.041
.041
.305
.305
.305
.305
.120
.120
.120
.120
30
55
18
30
No.
of
Teeth
P.D.
B
Bore
E
Length
C
Hub
Dia.
D
Hub
Proj.
7
8
9
10
12
14
16
20
24
.41
.47
.53
.59
.70
.83
.93
1.16
1.38
3/16
3/16
1/4
1/4
1/4
1/4
5/16
5/16
5/16
19/32
19/32
19/32
19/32
19/32
19/32
19/32
1/2
1/2
3/8
7/16
1/2
9/16
11/16
3/4
3/4
3/4
3/4
1/2
1/2
1/2
1/2
1/2
1/2
1/2
13/32
13/32
lbf
8
9
10
11
12
13
14
15
2-235
16
I
R
T
1
2

SIZE 19
.087 FACE
MATERIAL:
Inch

or Stainless Steel
Sprocket - Brass
SPECIFICATIONS:
Sprockets with:
.087
E
D
D/2
B C
P.D.
SET SCREW
Fig. 1
INCH COMPONENT
Catalog Number

Steel
A 6C 8-19
High-Tensile Steel
A 6C88-19
Brass
A 6B 8-19
Stainless Steel
A 6Y 8-19
9
Catalog Number
10
11
12
13
14
Fig. 2 Sprockets
A 6B 8-1906
A 6B 8-1907
A 6B 8-1908
A 6B 8-1909
A 6B 8-1910
A 6B 8-1912
A 6B 8-1915
A 6B 8-1916
A 6B 8-1918
A 6B 8-1920
A 6B 8-1924
A 6B 8-1932
A 6B 8-1936
A 6B 8-1948
A 6B 8-1960
A 6B 8-1972
15
16
Material
2-236
Fig. 2
P
Pitch
Links
Per
Foot
A
Wire
Dia.
C
Outside
Width
D
Inside
Width
Yield
Point
.185
.185
.185
.185
65
65
65
65
.041
.041
.041
.041
.305
.305
.305
.305
.120
.120
.120
.120
30
55
18
30
No.
of
Teeth
P.D.
B
Bore
E
Length
C
Hub
Dia.
D
Hub
Proj.
6
7
8
9
10
12
15
16
18
20
24
32
36
48
60
72
.36
.41
.47
.53
.59
.70
.87
.93
1.06
1.16
1.38
1.86
2.12
2.78
3.48
4.21
1/8
1/8
1/8
1/8
1/8
3/16
3/16
3/16
3/16
3/16
3/16
1/4
5/16
5/16
5/16
5/16
11/32
11/32
11/32
11/32
11/32
11/32
11/32
11/32
11/32
11/32
11/32
13/32
13/32
13/32
13/32
13/32
1/4
1/4
5/16
3/8
3/8
7/16
1/2
1/2
1/2
1/2
1/2
5/8
11/16
11/16
11/16
11/16
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
5/16
5/16
5/16
5/16
5/16
lbf

SIZE 19
.10 FACE
R
Inch
MATERIAL:
Ladder Chain - Steel, Brass, High-Tensile Steel or Stainless Steel

Sprockets - Acetal, Black
T
1
SPECIFICATIONS:
Sprockets with:

.1875
#4-40
.250
#6-32
.3125
#8-32
2
.20
O.D.
P.D.
.10
SET SCREW
C1
A
SPOT DRILL
.50
Fig. 1
Fig. 2
INCH COMPONENT
Catalog Number
Material
Fig. 1 Ladder Chain - Priced per Foot

Steel
A 6C 8-19
High-Tensile Steel
A 6C88-19
Brass
A 6B 8-19
Stainless Steel
A 6Y 8-19
Catalog Number
Fig. 2 Sprockets
A 6Z 8-192006
A 6Z 8-192008
A 6Z 8-192206
A 6Z 8-192208
A 6Z 8-192210
A 6Z 8-192406
A 6Z 8-192408
A 6Z 8-192410
A 6Z 8-192506
A 6Z 8-192508
A 6Z 8-192510
A 6Z 8-193006
A 6Z 8-193008
A 6Z 8-193010
A 6Z 8-193206
No.
of P.D.
Teeth
20
20
22
22
22
24
24
24
25
25
25
30
30
30
32
1.18
1.18
1.30
1.30
1.30
1.42
1.42
1.42
1.47
1.47
1.47
1.77
1.77
1.77
1.88
P
Pitch
Links
Per
Foot
A
Wire
Dia.
C
Outside
Width
D
Inside
Width
Yield
Point
lbf
.185
.185
.185
.185
65
65
65
65
.041
.041
.041
.041
.305
.305
.305
.305
.120
.120
.120
.120
30
55
18
30
B
C1
O.D. Bore
Hub
+.001
-.000 Dia.
1.35
1.35
1.47
1.47
1.47
1.59
1.59
1.59
1.64
1.64
1.64
1.94
1.94
1.94
2.05
.1875
.250
.1875
.250
.3125
.1875
.250
.3125
.1875
.250
.3125
.1875
.250
.3125
.1875
.62
.62
.62
.62
.75
.62
.62
.75
.62
.62
.75
.62
.62
.75
.62
Catalog Number
Fig. 2 Sprockets
A 6Z 8-193208
A 6Z 8-193210
A 6Z 8-193606
A 6Z 8-193608
A 6Z 8-193610
A 6Z 8-194006
A 6Z 8-194008
A 6Z 8-194010
A 6Z 8-194806
A 6Z 8-194808
A 6Z 8-194810
A 6Z 8-195406
A 6Z 8-195408
A 6Z 8-195410
A 6Z 8-196010
A 6Z 8-197210
No.
of P.D.
Teeth
32
32
36
36
36
40
40
40
48
48
48
54
54
54
60
72
1.88
1.88
2.12
2.12
2.12
2.35
2.35
2.35
2.82
2.82
2.82
3.18
3.18
3.18
3.53
4.23
B
C1
O.D. Bore
Hub
+.001
-.000 Dia.
2.05
2.05
2.29
2.29
2.29
2.52
2.52
2.52
2.99
2.99
2.99
3.35
3.35
3.35
3.70
4.40
.250
.3125
.1875
.250
.3125
.1875
.250
.3125
.1875
.250
.3125
.1875
.250
.3125
.3125
.3125
.62
.75
.62
.62
.75
.62
.62
.75
.62
.62
.75
.62
.62
.75
.75
.75
7
8
9
10
11
12
13
14
15
2-237
16
I
R
T
1

SIZE 19
MOLDED
.10 FACE
Inch
MATERIAL:

or Stainless Steel
SPECIFICATIONS:
Bore is sized for press fit. Use straight knurl

on shafting for maximum torque.
2
.10
INCH COMPONENT
Catalog Number
Catalog Number
12
13
14
No.
of P.D.
Teeth
Fig. 2 Sprockets E Length .36

.60
10
A 6M 8-191008
.71
12
A 6M 8-191208
.77
13
A 6M 8-191308
.83
14
A 6M 8-191408
.89
15
A 6M 8-191508
.95
16
A 6M 8-191608
1.06
18
A 6M 8-191808
1.18
20
A 6M 8-192008
1.18
20
A 6M 8-192012
1.30
22
A 6M 8-192208
1.30
22
A 6M 8-192212
1.30
22
A 6M 8-192216
1.42
24
A 6M 8-192408
1.42
24
A 6M 8-192412
1.42
24
A 6M 8-192416
15
16
Material

Steel
A 6C 8-19
High-Tensile Steel
A 6C88-19
Brass
A 6B 8-19
Stainless Steel
A 6Y 8-19
11
E
Fig. 1
10
O.D. P.D. C1
2-238
Fig. 2
P
Pitch
Links
Per
Foot
A
Wire
Dia.
C
Outside
Width
D
Inside
Width
Yield
Point
.185
.185
.185
.185
65
65
65
65
.041
.041
.041
.041
.305
.305
.305
.305
.120
.120
.120
.120
30
55
18
30
B
C1
O.D. Bore Hub
Nom. Dia.
.72
.84
.90
.95
1.01
1.07
1.19
.250
.250
.250
.250
.250
.250
.250
.37
.37
.49
.49
.49
.49
.49
1.30
1.30
1.42
1.42
1.42
1.54
1.54
1.54
.250
.375
.250
.375
.500
.250
.375
.500
.48
.62
.48
.62
.75
.48
.62
.75
Catalog Number
No.
of P.D.
Teeth

25
1.47
A 6M 8-192512
25
1.47
A 6M 8-192516
1.77
30
A 6M 8-193012
30
1.77
A 6M 8-193016
1.88
32
A 6M 8-193212
32
1.88
A 6M 8-193216
36
2.12
A 6M 8-193612
2.12
36
A 6M 8-193616
40
2.35
A 6M 8-194012
2.35
40
A 6M 8-194016
48
2.82
A 6M 8-194812
48
2.82
A 6M 8-194816
54
3.18
A 6M 8-195412
54
3.18
A 6M 8-195416
3.53
60
A 6M 8-196016
72
4.23
A 6M 8-197216
lbf
B
C1
O.D. Bore Hub
Nom. Dia.
1.60
1.60
1.89
1.89
2.01
2.01
2.24
2.24
2.48
2.48
2.95
2.95
3.30
3.30
3.65
4.36
.375
.500
.375
.500
.375
.500
.375
.500
.375
.500
.375
.500
.375
.500
.500
.500
.62
.75
.62
.75
.62
.75
.62
.75
.62
.75
.62
.75
.62
.75
.75
.75

SIZE 18
.120 FACE
MATERIAL:
Inch

or Stainless Steel
Sprocket - Steel
SPECIFICATIONS:
T
1
Sprockets with:
8 to16 teeth have a #10-32 set screw
5/8
.120
1/2
P
D
P.D.
1/4
B C
SET SCREW
Fig. 1
Fig. 2
INCH COMPONENT
Catalog Number
Material

Steel
A 6C 8-18
High-Tensile Steel
A 6C88-18
Brass
A 6B 8-18
Stainless Steel
A 6Y 8-18
Catalog Number
Fig. 2 Sprockets
* A 6C 8-1806
* A 6C 8-1807
* A 6C 8-1808
* A 6C 8-1809
* A 6C 8-1810
A 6C 8-1812
A 6C 8-1814
A 6C 8-1816
P
Pitch
Links
Per
Foot
A
Wire
Dia.
C
Outside
Width
D
Inside
Width
Yield
Point
.286
.286
.286
.286
42
42
42
42
.0475
.0475
.0475
.0475
.335
.335
.335
.335
.130
.130
.130
.130
40
75
25
40
No.
of
Teeth
P.D.
B
Bore
C
Hub
Dia.
6
7
8
9
10
12
14
16
.57
.67
.75
.83
.92
1.10
1.28
1.47
1/4
1/4
5/16
5/16
5/16
5/16
5/16
5/16
1/2
9/16
11/16
3/4
7/8
7/8
7/8
7/8
lbf
7
8
9
10
11
12
* Has recessed groove in hub for chain clearance.
13
14
15
2-239
16
I
R
T
1
2

SIZE 18
.120 FACE
MATERIAL:
Inch

or Stainless Steel
Sprocket - Brass
SPECIFICATIONS:
Sprockets with:
6 teeth have a #4-40 set screw
E
.120
D/2
SET SCREW
INCH COMPONENT
Catalog Number
Catalog Number
11
12
13
14
Fig. 2 Sprockets
A 6B 8-1806
A 6B 8-1808
A 6B 8-1809
A 6B 8-1810
A 6B 8-1811
A 6B 8-1812
A 6B 8-1814
A 6B 8-1816
A 6B 8-1818
A 6B 8-1820
A 6B 8-1824
A 6B 8-1827
A 6B 8-1832
A 6B 8-1844
A 6B 8-1848
15
16
Fig. 1
Material

Steel
A 6C 8-18
High-Tensile Steel
A 6C88-18
Brass
A 6B 8-18
Stainless Steel
A 6Y 8-18
9
10
B C
P.D.
2-240
Fig. 2
P
Pitch
Links
Per
Foot
A
Wire
Dia.
C
Outside
Width
D
Inside
Width
Yield
Point
.286
.286
.286
.286
42
42
42
42
.0475
.0475
.0475
.0475
.335
.335
.335
.335
.130
.130
.130
.130
40
75
25
40
No.
of
Teeth
P.D.
B
Bore
E
Length
C
Hub
Dia.
D
Hub
Proj.
6
8
9
10
11
12
14
16
18
20
24
27
32
44
48
.57
.75
.83
.92
1.02
1.10
1.28
1.47
1.64
1.82
2.18
2.47
2.92
4.00
4.36
3/16
3/16
3/16
3/16
3/16
3/16
1/4
1/4
1/4
1/4
5/16
5/16
5/16
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
7/16
7/16
7/16
7/16
1/2
1/2
1/2
1/2
1/2
3/8
7/16
7/16
1/2
1/2
1/2
5/8
5/8
5/8
5/8
3/4
3/4
3/4
3/4
3/4
1/4
1/4
1/4
1/4
1/4
1/4
5/16
5/16
5/16
5/16
3/8
3/8
3/8
3/8
3/8
lbf

SIZE 18
.100 FACE
R
Inch
MATERIAL:

T
1
SPECIFICATIONS:
Sprockets with:

.1875
#4-40
.250
#6-32
.3125
#8-32
2
.20
P
C
.100
SET SCREW
O.D. P.D. C
A
SPOT DRILL
Fig. 1
.500
Fig. 2
INCH COMPONENT
Catalog Number
Material

Steel
A 6C 8-18
High-Tensile Steel
A 6C88-18
Brass
A 6B 8-18
Stainless Steel
A 6Y 8-18
Catalog Number
Fig. 2 Sprockets
A 6Z 8-181306
A 6Z 8-181308
A 6Z 8-181406
A 6Z 8-181408
A 6Z 8-181506
A 6Z 8-181508
A 6Z 8-181606
A 6Z 8-181608
A 6Z 8-181806
A 6Z 8-181808
A 6Z 8-182006
A 6Z 8-182008
A 6Z 8-182206
A 6Z 8-182208
A 6Z 8-182406
No.
of P.D.
Teeth
13
13
14
14
15
15
16
16
18
18
20
20
22
22
24
1.194
1.194
1.284
1.284
1.374
1.374
1.465
1.465
1.645
1.645
1.826
1.826
2.007
2.007
2.189
P
Pitch
Links
Per
Foot
A
Wire
Dia.
C
Outside
Width
D
Inside
Width
Yield
Point
.286
.286
.286
.286
42
42
42
42
.0475
.0475
.0475
.0475
.335
.335
.335
.335
.130
.130
.130
.130
40
75
25
40
B
C
O.D. Bore
Hub
+.001
-.000 Dia.
1.38
1.38
1.47
1.47
1.56
1.56
1.66
1.66
1.84
1.84
2.02
2.02
2.20
2.20
2.38
.1875
.250
.1875
.250
.1875
.250
.1875
.250
.1875
.250
.1875
.250
.1875
.250
.1875
.625
.625
.625
.625
.625
.625
.625
.625
.625
.625
.625
.625
.625
.625
.625
Catalog Number
Fig. 2 Sprockets
A 6Z 8-182408
A 6Z 8-182410
A 6Z 8-182506
A 6Z 8-182508
A 6Z 8-182510
A 6Z 8-183006
A 6Z 8-183008
A 6Z 8-183010
A 6Z 8-183208
A 6Z 8-183210
A 6Z 8-183608
A 6Z 8-183610
A 6Z 8-184010
A 6Z 8-184810
A 6Z 8-185410
No.
of P.D.
Teeth
24
24
25
25
25
30
30
30
32
32
36
36
40
48
54
2.189
2.189
2.280
2.280
2.280
2.733
2.733
2.733
2.915
2.915
3.278
3.278
3.641
4.369
4.914
lbf
B
C
O.D. Bore
Hub
+.001
-.000 Dia.
2.38
2.38
2.47
2.47
2.47
2.92
2.92
2.92
3.11
3.11
3.47
3.47
3.83
4.56
5.10
.250
.3125
.1875
.250
.3125
.1875
.250
.3125
.250
.3125
.250
.3125
.3125
.3125
.3125
.625
.750
.625
.625
.750
.625
.625
.750
.625
.750
.625
.750
.750
.750
.750
7
8
9
10
11
12
13
14
15
2-241
16
I
R
T
1

SIZE 18
MOLDED
.100 FACE
Inch
MATERIAL:

or Stainless Steel
SPECIFICATIONS:
Fig. 1
INCH COMPONENT
Material

Steel
A 6C 8-18
High-Tensile Steel
A 6C88-18
Brass
A 6B 8-18
Stainless Steel
A 6Y 8-18
Catalog Number
8
9
10
11
12
13
14
15
16
Catalog Number
O.D. P.D. C
Bore is sized for press fit. Use straight

knurl on shafting for maximum torques.
1
.100
Fig. 2 Sprockets
A 6M 8-180808
A 6M 8-181008
A 6M 8-181208
A 6M 8-181308
A 6M 8-181312
A 6M 8-181408
A 6M 8-181412
A 6M 8-181508
A 6M 8-181512
A 6M 8-181608
A 6M 8-181612
A 6M 8-181808
A 6M 8-181812
A 6M 8-182008
A 6M 8-182012
A 6M 8-182208
A 6M 8-182212
A 6M 8-182408
A 6M 8-182412
A 6M 8-182416
A 6M 8-182508
A 6M 8-182512
A 6M 8-182516
A 6M 8-183008
A 6M 8-183012
A 6M 8-183016
A 6M 8-183212
A 6M 8-183216
A 6M 8-183612
A 6M 8-183616
A 6M 8-184016
A 6M 8-184816
A 6M 8-185416
2-242
Fig. 2
P
Pitch
Links
Per
Foot
A
Wire
Dia.
C
Outside
Width
D
Inside
Width
Yield
Point
.286
.286
.286
.286
42
42
42
42
.0475
.0475
.0475
.0475
.335
.335
.335
.335
.130
.130
.130
.130
40
75
25
40
No.
of
Teeth
P.D.
O.D.
B
Bore
Nom.
8
10
12
13
13
14
14
15
15
16
16
18
18
20
20
22
22
24
24
24
25
25
25
30
30
30
32
32
36
36
40
48
54
.747
.925
1.104
1.194
1.194
1.284
1.284
1.374
1.374
1.465
1.465
1.645
1.645
1.826
1.826
2.007
2.007
2.189
2.189
2.189
2.280
2.280
2.280
2.733
2.733
2.733
2.915
2.915
3.278
3.278
3.641
4.369
4.914
.94
1.12
1.29
1.38
1.38
1.47
1.47
1.56
1.56
1.66
1.66
1.84
1.84
2.02
2.02
2.38
2.38
2.38
2.38
2.38
2.47
2.47
2.47
2.92
2.92
2.92
3.11
3.11
3.47
3.47
3.83
4.56
5.10
1/4
1/4
1/4
1/4
3/8
1/4
3/8
1/4
3/8
1/4
3/8
1/4
3/8
1/4
3/8
1/4
3/8
1/4
3/8
1/2
1/4
3/8
1/2
1/4
3/8
1/2
3/8
1/2
3/8
1/2
1/2
1/2
1/2
C
E
Hub Length
Dia.
.490
.490
.490
.500
.625
.500
.625
.500
.625
.500
.625
.500
.625
.500
.625
.500
.625
.500
.625
.750
.500
.625
.750
.500
.625
.750
.625
.750
.625
.750
.750
.750
.750
.35
.35
.35
.40
.50
.40
.50
.40
.50
.40
.50
.40
.50
.40
.50
.40
.50
.40
.50
.50
.40
.50
.50
.40
.50
.50
.50
.50
.50
.50
.50
.50
.50
lbf

SIZE 17
.170 FACE
MATERIAL:
Inch

or Stainless Steel
Sprocket - Brass
SPECIFICATIONS:
T
1
Sprockets with:
E
.170
D
D/2
P
D
B C
P.D.
A
SET SCREW
Fig. 1
Fig. 2
INCH COMPONENT
Catalog Number
Material

Steel
A 6C 8-17
High-Tensile Steel
A 6C88-17
Brass
A 6B 8-17
Stainless Steel
A 6Y 8-17
Catalog Number
Fig. 2 Sprockets
A 6B 8-1706
A 6B 8-1707
A 6B 8-1709
A 6B 8-1712
A 6B 8-1716
A 6B 8-1722
A 6B 8-1724
A 6B 8-1727
P
Pitch
Links
Per
Foot
A
Wire
Dia.
C
Outside
Width
D
Inside
Width
Yield
Point
.353
.353
.353
.353
34
34
34
34
.054
.054
.054
.054
.470
.470
.470
.470
.190
.190
.190
.190
50
95
30
50
No.
of
Teeth
P.D.
B
Bore
E
Length
C
Hub
Dia.
D
Hub
Proj.
6
7
9
12
16
22
24
27
.70
.80
1.02
1.35
1.78
2.45
2.66
3.00
3/16
3/16
3/16
1/4
1/4
5/16
5/16
5/16
7/16
7/16
1/2
7/16
1/2
9/16
9/16
9/16
7/16
1/2
9/16
5/8
5/8
3/4
3/4
3/4
1/4
1/4
5/16
1/4
5/16
3/8
3/8
3/8
lbf
7
8
9
10
11
12
13
14
15
2-243
16
I
R
T
1

SIZE 14
.170 FACE
MATERIAL:
Inch

or Stainless Steel
Sprocket - Steel
SPECIFICATIONS:
Sprockets with:
12 to 88 teeth have a 1/4-20 set screw
E
.170
D/2
7
8
9
11
12
13
14
SET SCREW
Fig. 1
Fig. 2
INCH COMPONENT
Catalog Number
Material

Steel
A 6C 8-14
High-Tensile Steel
A 6C88-14
Brass
A 6B 8-14
Stainless Steel
A 6Y 8-14
No.
of
Teeth
Fig. 2 Sprockets Plain Type

A 6C 8-1408
8
A 6C 8-1409
9
A 6C 8-1411
11
A 6C 8-1412
12
A 6C 8-1414
14
* A 6C 8-1434
34
* A 6C 8-1436
36
* A 6C 8-1438
38
42
* A 6C 8-1442
* A 6C 8-1444
44
* A 6C 8-1448
48
* A 6C 8-1454
54
* A 6C 8-1472
72
* A 6C 8-1480
80
* A 6C 8-1488
88
* Has inserted hub
15
16
B C
P.D.
Catalog Number
10
5
6
2-244
P
Pitch
Links
Per
Foot
A
Wire
Dia.
C
Outside
Width
D
Inside
Width
Yield
Point
.353
.353
.353
.353
34
34
34
34
.080
.080
.080
.080
.555
.555
.555
.555
.205
.205
.205
.205
80
150
45
80
P.D.
B
Bore
E
Length
C
Hub
Dia.
D
Hub
Proj.
.92
1.03
1.25
1.36
1.59
3.83
4.05
4.27
4.72
4.95
5.40
6.07
8.09
8.99
9.89
3/8
3/8
3/8
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
13/16
13/16
13/16
13/16
13/16
13/16
13/16
13/16
13/16
13/16
13/16
13/16
13/16
13/16
13/16
7/8
7/8
1-1/8
1-3/16
1-3/16
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-3/4
1-3/4
1-3/4
1-3/4
1-3/4
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
lbf

SIZE 14
.17 FACE
R
Inch
MATERIAL:

T
1
SPECIFICATIONS:
Sprockets with:

.1875
#4-40
.250
#6-32
.3125
#8-32
2
.20
.17
SET SCREW
O.D. P.D. C1
A
SPOT DRILL
Fig. 1
.57
Fig. 2
INCH COMPONENT
Catalog Number
Material

Steel
A 6C 8-14
High-Tensile Steel
A 6C88-14
Brass
A 6B 8-14
Stainless Steel
A 6Y 8-14
P
Pitch
Links
Per
Foot
A
Wire
Dia.
C
Outside
Width
D
Inside
Width
Yield
Point
.353
.353
.353
.353
34
34
34
34
.080
.080
.080
.080
.555
.555
.555
.555
.205
.205
.205
.205
80
150
45
80
No.
Catalog Number of P.D.
Teeth
B
C1
D Bore Hub
Dia. +.001 Dia.
-.000
Fig. 2 Sprockets
A 6Z 8-141206
A 6Z 8-141208
A 6Z 8-141306
A 6Z 8-141308
A 6Z 8-141406
A 6Z 8-141408
A 6Z 8-141508
A 6Z 8-141510
A 6Z 8-141608
A 6Z 8-141610
A 6Z 8-141810
A 6Z 8-142010
A 6Z 8-142210
A 6Z 8-142410
A 6Z 8-142510
A 6Z 8-143010
A 6Z 8-143210
A 6Z 8-143610
A 6Z 8-144010
A 6Z 8-144810
1.58
1.58
1.69
1.69
1.79
1.79
1.90
1.90
2.00
2.00
2.22
2.44
2.65
2.92
3.02
3.56
3.78
4.25
4.71
5.58
12
12
13
13
14
14
15
15
16
16
18
20
22
24
25
30
32
36
40
48
1.36
1.36
1.48
1.48
1.59
1.59
1.70
1.70
1.81
1.81
2.03
2.26
2.48
2.70
2.82
3.38
3.60
4.05
4.50
5.40
.1875
.250
.1875
.250
.1875
.250
.250
.3125
.250
.3125
.3125
.3125
.3125
.3125
.3125
.3125
.3125
.3125
.3125
.3125
lbf
7
8
9
10
.62
.62
.62
.62
.62
.62
.62
.75
.62
.75
.75
.75
.75
.75
.75
.75
.75
.75
.75
.75
11
12
13
14
15
2-245
16
I
R
T
1

SIZE 14
MOLDED
.170 FACE
Inch
MATERIAL:

or Stainless Steel
SPECIFICATIONS:
Bore is sized for press fit. Use straight knurl

on shafting for maximum torque.
.17
P
O.D. P.D. C1
E
Fig. 1
INCH COMPONENT
Catalog Number
Catalog Number
10
11
12
13
14
15
16
Material

Steel
A 6C 8-14
High-Tensile Steel
A 6C88-14
Brass
A 6B 8-14
Stainless Steel
A 6Y 8-14
8
9
Fig. 2 Sprockets
A 6M 8-140808
A 6M 8-141008
A 6M 8-141208
A 6M 8-141212
A 6M 8-141216
A 6M 8-141308
A 6M 8-141312
A 6M 8-141316
A 6M 8-141412
A 6M 8-141416
A 6M 8-141512
A 6M 8-141516
A 6M 8-141612
A 6M 8-141616
A 6M 8-141816
A 6M 8-142016
A 6M 8-142216
A 6M 8-142416
A 6M 8-142516
A 6M 8-143016
A 6M 8-143216
A 6M 8-143616
A 6M 8-144016
A 6M 8-144816
2-246
No.
of P.D.
Teeth
8
10
12
12
12
13
13
13
14
14
15
15
16
16
18
20
22
24
25
30
32
36
40
48
.92
1.14
1.36
1.36
1.36
1.48
1.48
1.48
1.59
1.59
1.70
1.70
1.81
1.81
2.03
2.26
2.48
2.70
2.82
3.38
3.60
4.05
4.50
5.40
P
Pitch
Links
Per
Foot
A
Wire
Dia.
C
Outside
Width
D
Inside
Width
Yield
Point
.353
.353
.353
.353
34
34
34
34
.080
.080
.080
.080
.555
.555
.555
.555
.205
.205
.205
.205
80
150
45
80
B
C1
E
O.D. Bore Hub Length
Nom. Dia.
1.14
1.36
1.58
1.58
1.58
1.69
1.69
1.69
1.79
1.79
1.90
1.90
2.00
2.00
2.22
2.44
2.65
2.92
3.02
3.56
3.78
4.25
4.71
5.58
.250
.250
.250
.375
.500
.250
.375
.500
.375
.500
.375
.500
.375
.500
.500
.500
.500
.500
.500
.500
.500
.500
.500
.500
Fig. 2
.49
.49
.49
.62
.75
.49
.62
.75
.62
.75
.62
.75
.62
.75
.75
.75
.75
.75
.75
.75
.75
.75
.75
.75
.42
.42
.47
.57
.57
.47
.57
.57
.57
.57
.57
.57
.57
.57
.57
.57
.57
.57
.57
.57
.57
.57
.57
.57
lbf
LADDER CHAINS .250 & .375 PITCH

FOR .110 & .168 FACE SPROCKETS
MATERIAL:

or Stainless Steel
Inch
SPECIFICATION:
These sprockets can be used

with ladder or roller chains.
INCH COMPONENT
Catalog Number
Material
Ladder Chain - Priced Per Foot

Steel
A 6C 8-25
High-Tensile Steel
A 6C88-25
Brass
A 6B 8-25
Stainless Steel
A 6Y 8-25
Brass
A 6B 8-37
Stainless Steel
A 6Y 8-37
Catalog Number
(Ref.)
Sprockets Locator
A 6T 7-25...
A 6M 7-25...
A 6X 7-25...
A 6C 7-25B..
A 6C 7-25..
A 6M 7-37..
P
Pitch
Links
Per
Foot
A
Wire
Dia.
C
Outside
Width
D
Inside
Width
Yield
Point
lbf
1/4
1/4
1/4
1/4
3/8
3/8
48
48
48
48
32
32
.054
.054
.054
.054
.080
.080
.335
.335
.335
.335
.555
.555
.130
.130
.130
.130
.205
.205
30
90
26
30
45
80
Pitch
Sprocket
Material
Catalog
Page
1/4
1/4
1/4
1/4
1/4
3/8
Nylon
Acetal
Stainless Steel
Steel
Steel
Nylatron
2-229
2-230
2-225
2-226
2-227
2-232
3
4
5
6
7
8
9
10
A 6M 7-25ACE
11
A 6T 7-2528
12
13
14
A 6C 7-25B09
A 6M 7-3709
15
2-247
16
SYNCHROMESH DRIVE SYSTEMS

R
Inch
T
1
2
3
4
5
6
The use of stranded wire and nylon resin produces an extremely flexible cable that opens up new design
possibilities, which were previously not possible with any other synchronous drives. The schematic diagram
shown below illustrates the geometric features of an x-y plotter. Synchromesh cables are capable of changing
operating planes, limited only by the size and proximity of adjacent pulleys. This unique characteristic makes
it possible to produce this plotter design without employing expensive lead screw drive components. This is
only one example of the countless possibilities offered with Synchromesh Drive Systems.
Complementing the Synchromesh cables are the drive pulleys, which have helical grooves on their outside
diameter, to accurately engage the spiral convolutions on the drive cable. An additional radial groove of half
round cross section supports the core cable and provides lateral stability. Synchromesh cables can be readily
secured to other mechanism members in many different ways as well as those offered in the catalog pages.
Please note, however, that the Synchromesh Drive Systems are intended for reciprocating motion applications and cannot be made endless.
7
8
9
10
11
ADVANTAGES AND DESIGN FEATURES:

Synchronous motion
Flexible in all directions
Miniature in size
High strength
Small bending radius
Lightweight
Low inertia
Low tension required
12
13
Chemically resistant

Electrically conductive & insulated
Pulleys available machined or molded
Easy to mount attachments & end fittings
14
Cables available up to 200 feet long
15
16
The Synchromesh Drive System represents an entirely new approach to synchronous drives. At the heart of
the system is a drive cable, which replaces conventional timing belts as well as other means of transmitting
synchronous motion. The cable consists of a core bundle of stranded stainless steel wires encapsulated in
a nylon jacket. Wound spirally around the nylon jacket is another cable of similar construction. The spiral
member is bonded to the core cable to provide functional stability under load. The pitch of the spiral winding
is carefully controlled during the winding and bonding processes.
2-248
SYNCHROMESH DRIVE SELECTION TABLE

R
Inch
A 6J 9-AS0605
or
A 6J 9MAS0605
A 6J 9-AS0805
or
A 6J 9MAS0805
A 6J 9-AS1005
or
A 6J 9MAS1005
A 6J 9-AS1209
or
A 6J 9MAS1209
PULLEY
A 6P 9-060
or
A 6P 9M060
A 6P 9-080
or
A 6P 9M080
IDLER PULLEY STYLES
Catalog Number
CABLE
Steel /
Ball Bearing
All
Plastic
Plastic /
Sintered Brg.
A 6C 9-00804
(.441)
A 6M 9-00804
(.493)
A 6M 9-01004
(.611)
A 6M 9-01204
(.709)
A 6M 9-01606
(.861)
A 6T 9-00604
(.401)
A 6T 9-00804
(.517)
A 6T 9-01004
(.626)
A 6T 9-01204
(.711)
A 6T 9-00804
(.544)
A 6T 9-01204
(.769)
A 6T 9-01706
(1.019)
A 6T 9-02006
(1.179)
A 6T 9-02008
(1.179)
A 6T 9-01706
(1.058)
A 6T 9-02006
(1.253)
A 6T 9-02008
(1.253)
A 6T 9-02408
(1.348)
A 6T 9-02412
(1.348)
A 6T 9-02408
(1.421)
A 6T 9-02808
(1.491)
A 6T 9-02412
(1.421)
A 6T 9-02812
(1.491)
A 6C 9-00804
(.489)
A 6P 9-100
or
A 6P 9M100
_____
A 6P 9-120
or
A 6P 9M120
A 6C 9-01606
(.866)
A 6C 9-01706
(1.000)
A 6M 9-01204
(.759)
A 6M 9-01606
(1.009)
A 6M 9-02006
(1.229)
A 6M 9-02408
(1.348)
A 6M 9-02408
(1.426)
A 6M 9-02808
(1.476)
Nylon /
Ball Bearing
A 6Z 9-01004
(.623)
A 6Z9-01204
(.706)
A 6Z 9-01604
(.906)
A 6Z 9-01204
(.767)
A 6Z 9-01604
(.992)
A 6Z 9-02006
(1.199)
A 6Z 9-01706
(1.029)
A 6Z 9-02008
(1.199)
A 6Z 9-02006
(1.258)
A 6Z 9-01706
(1.064)
A 6Z 9-02008
(1.258)
A 6Z 9-02408
(1.388)
A 6Z 9-02412
(1.388)
A 6Z 9-02408
(1.476)
A 6Z 9-02808
(1.501)
A 6Z 9-02412
(1.476)
A 6Z 9-02812
(1.501)
NOTE: Numbers shown in parentheses indicate pitch diameters of cable when wrapped around related pulley.
Example: Cable A 6J 9-AS1005 when used with pulley A 6M 9-02408 has a pitch diameter of 1.348.
3
4
5
6
7
8
9
10
11
12
METRIC SIZE BORES ARE AVAILABLE ON REQUEST.
13
14
15
2-249
16
SYNCHROMESH CABLE
PATENTED
MINIATURE
SYNCHRONOUS
R
Inch
MATERIAL:
Core - 304 Stainless Steel

Casing - Nylon
SPECIFICATIONS:
Life Data:
106 minimum flexing cycles where:
Pulley Pitch Radius (R) = 13.9 x d2
Accuracy:
1. Pitch Error .002 in.
2. Cumulative Pitch Error .16 in.
max. over 100 pitches.
Ambient Factors:
1. Temperature Range: -22F to +176F
2. Avoid strong acids, alkalies and
organic solvents.
Priced Per Foot
NYLON
COATING
NYLON
COATING
3
d1
5
INCH COMPONENT
Catalog Number
P
Pitch
A 6J 9-AS0605
A 6J 9-AS0805
A 6J 9-AS1005
A 6J 9-AS1209
.120
.150
.200
.250
D
Outside
Dia.
in.
.063
.087
.110
.134
d1
Dia.
Breaking
Load
.024
.032
.039
.047
.024
.031
.039
.047
36
73
119
176
lbf
7
8
9
10
11
12
13
14
15
2-250
REV: 04.17.12 mh
16
SYNCHROMESH CABLE PULLEYS

MATERIAL:
Pulley - Acetal
Insert - Brass*
* Aluminum inserts used on .250 pitch pulleys.
R
Inch
Also see Idler Pulley Series:

1. Steel with ball bearing - A 6C 9-...
2. Molded Nylon with Ball Bearing - A 6Z 9-...
3. Molded Nylon with Sintered Bronze Bearing - A 6T 9-...
4. Molded Acetal - A 6M 9-...
HELIX
ANGLE
2
SET
SCREW
D/2
CABLE
PITCH
LINE
GROOVE PROFILES
P.D.
3
4
5
SPOT
DRILL
INCH COMPONENT
Catalog Number
.120 Pitch - Helix Angle 45
A 6P 9-0601504
A 6P 9-0602004
A 6P 9-0602006
A 6P 9-0602504
A 6P 9-0602506
A 6P 9-0801506
A 6P 9-0801508
A 6P 9-0802406
A 6P 9-0802408
A 6P 9-1001508
A 6P 9-1001510
A 6P 9-1003008
A 6P 9-1003010
A 6P 9-1201512
A 6P 9-1203012
No.
of
Grooves
P.D.
B
Bore
+.001
-.000
F
Face
Width
E
Length
C
Hub
Dia.
D
Hub
Proj.
(Ref.)
Set
Screw
15
20
20
25
25
.573
.764
.764
.955
.955
.125
.125
.1875
.125
.1875
9/64
9/64
9/64
9/64
9/64
3/8
3/8
3/8
3/8
3/8
13/32
35/64
35/64
35/64
35/64
15/64
15/64
15/64
15/64
15/64
#2-56
#2-56
#6-40
#2-56
#6-40
15
15
24
24
.716
.716
1.146
1.146
.1875
.250
.1875
.250
9/64
9/64
9/64
9/64
3/8
3/8
3/8
3/8
35/64
35/64
5/8
5/8
15/64
15/64
15/64
15/64
#6-40
#8-32
#6-40
#8-32
15
15
30
30
.955
.955
1.910
1.910
.250
.3125
.250
.3125
3/16
3/16
3/16
3/16
1/2
1/2
1/2
1/2
5/8
5/8
43/64
43/64
5/16
5/16
5/16
5/16
#8-32
#8-32
#8-32
#8-32
11
15
30
1.193
2.387
.375
.375
1/4
1/4
5/8
5/8
7/8
7/8
3/8
3/8
#10-32
#10-32
12
9
10
13
14
15
2-251
16
I
R
SYNCHROMESH CABLE ATTACHMENTS

LOOP SLEEVES
THIMBLES
Inch
MATERAL:
T
1
2
Loop Sleeves - Copper, Zinc Plated

Thimbles - Stainless Steel
P = Pin Diameter
D = Distance from bearing point to fitting
P should be at least five (5) times the cable diameter
for guaranteed breaking strength and D should be
at least 2.5 times P.
LOOP SLEEVE
3
D
4
5
6
INCH COMPONENT
For
Cable No.'s
L
Length After
Swaging
A 6J 9-AS0605
A 6J 9-AS0805
A 6J 9-AS1005
A 6J 9-AS1209
7/16
15/32
1/2
1/2
Catalog Number
Loop Sleeves - Priced Per 10 Pieces
A 6B 9-S039
A 6B 9-S063
A 6B 9-S093
A 6B 9-S093
7
8
10
F
E
11
12
13
14
INCH COMPONENT
Catalog Number
For
Cable No.'s
Thimbles - Priced Per 10 Pieces

A 6J 9-AS0605
A 6C 9-T015
A 6J 9-AS0805
A 6C 9-T047
A 6J 9-AS1005
A 6C 9-T047
A 6J 9-AS1209
A 6C 9-T094
15
16
Thimbles provide loop support at

higher loads & protect cables from
wear when motion is present. Some
thimbles may have open and/or
uneven ends.
2-252
.188
.339
.339
.339
1/4
43/64
43/64
45/64
1/8
3/16
3/16
7/32
1/8
3/32
3/32
9/64
.015
.032
.032
.032
3/64
5/64
5/64
5/64
SYNCHROMESH CABLE ATTACHMENTS

PLUGS
EYES
MATERIAL:
Inch
Plugs - Annealed Brass

Eyes - Low Carbon Steel,
Chromium Finish - Meets EU Standards.
1
.215
.116
B
.295
A
DIMENSIONS AFTER
CRIMPING
INCH COMPONENT
Used with
Cable No.
Catalog Number
A 6J 9-B103
A
A
A
A
6J
6J
6J
6J
9-AS0605
9-AS0805
9-AS1005
9-AS1209
A*
.111
.116
.120
.120
.275
.275
.270
.270
* Crimp plugs in vise or press to this dimension to obtain proper holding force.
7
8
9
.046
.168 R
CRIMP
.165
10
.340
11
.610
Universal eyes fit all cable sizes and
provide for convenient screw mounting.
A
DIMENSIONS
AFTER CRIMPING
INCH COMPONENT
Used with
Cable No.
Catalog Number
A 6J 9-AA39
A
A
A
*A
6J
6J
6J
6J
9-AS0605
9-AS0805
9-AS1005
9-AS1209
12
13
.102
.104
.107
.110
14
* Cable A 6J 9-AS1209 must have outer helical wire section removed prior to crimping for maximum holding force.
2-253
15
16
I
R
T
1
2
3
4
5
MINIATURE CABLES AND FITTINGS

THREADED PLUG
BALL END PLUG
MATERIAL:
Inch
Cables - Stainless Steel, Nylon Coated

Fittings - Brass
0
A
Catalog Number
Cable
O.D.
A
Wire
Dia.
Breaking
Strength
.024
.034
.037
.044
1/16
3/32
1/8
.018
.027
.031
.036
3/64
1/16
3/32
40
90
120
160
270
480
920
Sold in Multiples of 10 Feet

A 6X 9-024
A 6X 9-034
A 6X 9-037
A 6X 9-044
A 6X 9-062
A 6X 9-094
A 6X 9-125
.500
BALL END PLUG
L*
11
12
13
14
15
16
10
lbf
Nylon coating protects wire and pulleys from abrasion and seals in lubrication.
In selecting cable fittings, use "A" diameter as it is recommended that nylon covering be stripped prior to swaging.
F*
O.D.
LENGTH
INCH COMPONENT
NYLON COATED
F*
L*
Fig. 2
Fig. 1
INCH COMPONENT
Catalog Number
A
Wire
Dia.
Fig. 1 Threaded Plug - Priced Per 10 Pieces

A 6B 9-01005
.010 .027
.028 .037
A 6B 9-02805
.038 .048
A 6B 9-03805
.028 .037
A 6B 9-02808
.038 .048
A 6B 9-03808
A 6B 9-04710
3/64
1/16
A 6B 9-06310
Fig. 2 Ball End Plug - Priced Per 10 Pieces
.010 .027
A 6B 9-010125
.028 .037
A 6B 9-028125
A 6B 9-038125
.038 .046
A 6B 9-010250
.010 .027
A 6B 9-028250
.028 .037
.038 .046
A 6B 9-038250
.010 .027
A 6B 9-010395
A 6B 9-028395
.028 .037
A 6B 9-038395
.038 .048
A 6B 9-049395
.049 .065
3/64
A 6B 9-047540
1/16
A 6B 9-063540
T
Thread
F*
Flats
L*
Diameter
Before
Swaging
#5-40
#5-40
#5-40
#8-32
#8-32
#10-24
#10-24
7/64
7/64
7/64
9/64
9/64
5/32
5/32
1
1
1
1
1
1-1/8
1-1/8
1/8
1/8
1/8
5/32
5/32
3/16
3/16
.105
.105
.105
.105
.105
.105
1/8
1/8
1/8
1/8
5/32
5/32
1/8
1/8
1/8
1/4
1/4
1/4
25/64
25/64
25/64
25/64
17/32
17/32
1/8
1/8
1/8
1/8
1/8
1/8
5/32
5/32
5/32
5/32
3/16
3/16
Ball End is rated at 50% of rated breaking strength of cable.

* These dimensions obtained when fittings are swaged to "F" dimensions. Before swage, the fitting is round.
2-254
CABLE ATTACHMENTS
LOOP SLEEVES
THIMBLES
R
Inch
MATERAL:
Loop Sleeves - Brass & Copper, Zinc Plated

P = Pin Diameter
D = Distance from bearing point to fitting
P should be at least five (5) times the cable diameter

for guaranteed breaking strength and D should be
at least 2.5 times P.
LOOP SLEEVE
CABLE
(SOLD SEPARATELY)
2
3
LENGTH
INCH COMPONENT
Catalog Number
Loop Sleeves - Brass
A 6B 9-S015
A 6B 9-S023
Loop Sleeves - Copper, Zinc Plated
A 6B 9-S027
A 6B 9-S039
A 6B 9-S063
A 6B 9-S093
For
Cable No.'s
A 6X 9-
For Stripped
Cable Dia.
(Ref.)
Approximate Length
Before Swaging
024
024
.015 - .022
.023 - .026
7/32
1/4
034, 037, 044

062
094
125
.027 - .038
.039 - .052
1/16
3/32
17/64
25/64
21/64
25/64
7
8
Thimbles provide loop support at

higher loads & protect cables from
wear when motion is present. Some
thimbles may have open and/or
uneven ends.
10
11
E
A
12
INCH COMPONENT
Catalog Number
A 6C 9-T015
A 6C 9-T047
A 6C 9-T094
13
For
Cable No.'s
A 6X 9-
For Stripped
Cable Dia.
(Ref.)
024, 034, 037, 044

044, 062
094, 125
1/64 - 3/64
3/64 - 5/64
3/32 - 1/8
.188
.339
.339
1/4
43/64
45/64
1/8
3/16
7/32
1/8
3/32
9/64
.015
.032
.032
3/64
5/64
5/64
2-255
14
15
16
I
R
T
1
2
3
CRIMPING TOOLS
4-NESTED PRECISION CRIMPING TOOL
This 4-nested precision crimping tool gives compound

leverage of at least 15-1. Crimped properly, it will give
at least 50% of rated cable strength when swaged over the
nylon. Nylon should be stripped for best swaging bond.
The scissor-action, plier-type tool has jaws which are made
of a tough chrome alloy steel. All component parts of the
tool are hardened and tempered. The handles have
nonslip plastic grips. Easy to use. Overall length is 8.5 inches.
Can be used for up to 1/16 diameter core steel cable. Also
Synchromesh Cable Numbers A 6J9-AS0605 and A 6J9-AS0805.
Not recommended for #10-24 threaded plugs
or for cable diameters 3/64 and up.
INCH COMPONENT
Catalog Number
A 6O 9-00
5
6
7
8
SIX-CAVITY MULTIPLE-SLEEVE CRIMPING TOOL
This six-cavity multiple-sleeve crimping tool is made of

high carbon steel, heat-treated and hardened with centerless
ground shoulder bolts. It is used on loop sleeves and on
cable diameters from 3/64 to 3/16 dia. Also Synchromesh Cable
Numbers A 6J9-AS1005 and A 6J9-AS1209. It covers a range
of cable strengths from 270 lbf to 3700 lbf
INCH COMPONENT
9
10
Catalog Number
A 6O 9-01
11
12
13
14
15
16
2-256
Inch
ROUND ENDLESS BELTS

NEOPRENE
1/16, 3/32 & 1/8 DIAMETER
R
Inch
MATERIAL:
Neoprene
Approx. 70 durometer compounded for
use in mechanical belt drives
-65F to +210F
DIAMETER
These belts can be used with Companion Pulleys

and Grooved Pulleys, see index.
3% tolerance on circumference.
10% elongation is permissible.
INCH COMPONENT
Catalog Number
1/16 Diameter
A 6R11-02010
A 6R11-02012
A 6R11-02014
A 6R11-02016
A 6R11-02020
A 6R11-02021
A 6R11-02022
A 6R11-02023
A 6R11-02024
A 6R11-02025
A 6R11-02026
A 6R11-02027
A 6R11-02030
A 6R11-02032
A 6R11-02034
A 6R11-02036
A 6R11-02040
A 6R11-02042
A 6R11-02044
A 6R11-02046
A 6R11-02050
A 6R11-02052
3/32 Diameter
A 6R11-03002
A 6R11-03004
A 6R11-03006
A 6R11-03010
A 6R11-03012
A 6R11-03014
A 6R11-03016
A 6R11-03020
A 6R11-03022
A 6R11-03024
A 6R11-03026
A 6R11-03030
A 6R11-03032
A 6R11-03034
A 6R11-03036
A 6R11-03040
A 6R11-03042
A 6R11-03044
A 6R11-03046
A 6R11-03050
A 6R11-03052
I.D.
INCH COMPONENT
I.D.
1
1-1/4
1-1/2
1-3/4
2
2-1/8
2-1/4
2-3/8
2-1/2
2-5/8
2-3/4
2-7/8
3
3-1/4
3-1/2
3-3/4
4
4-1/4
4-1/2
4-3/4
5
5-1/4
1/4
1/2
3/4
1
1-1/4
1-1/2
1-3/4
2
2-1/4
2-1/2
2-3/4
3
3-1/4
3-1/2
3-3/4
4
4-1/4
4-1/2
4-3/4
5
5-1/4
Catalog Number
3/32 Diameter
A 6R11-03054
A 6R11-03056
A 6R11-03060
A 6R11-03062
A 6R11-03064
A 6R11-03066
A 6R11-03070
A 6R11-03072
A 6R11-03074
A 6R11-03076
A 6R11-03080
A 6R11-03082
A 6R11-03084
A 6R11-03086
A 6R11-03090
A 6R11-03092
A 6R11-03094
A 6R11-03096
1/8 Diameter
A 6R11-04002
A 6R11-040025
A 6R11-04004
A 6R11-040045
A 6R11-04006
A 6R11-040065
A 6R11-04010
A 6R11-04012
A 6R11-040125
A 6R11-04014
A 6R11-04016
A 6R11-04020
A 6R11-04022
A 6R11-04024
A 6R11-04026
A 6R11-04030
A 6R11-04032
A 6R11-04034
A 6R11-04036
A 6R11-04040
A 6R11-04042
A 6R11-04044
A 6R11-04046
A 6R11-04050
A 6R11-04052
5-1/2
5-3/4
6
6-1/4
6-1/2
6-3/4
7
7-1/4
7-1/2
7-3/4
8
8-1/4
8-1/2
8-3/4
9
9-1/4
9-1/2
9-3/4
1/4
5/16
1/2
9/16
3/4
13/16
1
1-1/4
1-5/16
1-1/2
1-3/4
2
2-1/4
2-1/2
2-3/4
3
3-1/4
3-1/2
3-3/4
4
4-1/4
4-1/2
4-3/4
5
5-1/4
1
2
INCH COMPONENT
I.D.
Catalog Number
1/8 Diameter
A 6R11-04054
A 6R11-04056
A 6R11-04060
A 6R11-04062
A 6R11-04064
A 6R11-04066
A 6R11-04070
A 6R11-04072
A 6R11-04074
A 6R11-04076
A 6R11-04080
A 6R11-04082
A 6R11-04084
A 6R11-04086
A 6R11-04090
A 6R11-04092
A 6R11-04094
A 6R11-04096
A 6R11-04100
A 6R11-04104
A 6R11-04110
A 6R11-04114
A 6R11-04120
A 6R11-04130
A 6R11-04140
A 6R11-04150
A 6R11-04160
A 6R11-04170
A 6R11-04180
3/16 Diameter
A 6R11-06016
A 6R11-06024
A 6R11-06031
A 6R11-06039
A 6R11-06047
A 6R11-06055
A 6R11-06063
A 6R11-06067
A 6R11-06072
A 6R11-06076
A 6R11-06080
A 6R11-06083
A 6R11-06086
A 6R11-06092
3
I.D.
5-1/2
5-3/4
6
6-1/4
6-1/2
6-3/4
7
7-1/4
7-1/2
7-3/4
8
8-1/4
8-1/2
8-3/4
9
9-1/4
9-1/2
9-3/4
10
10-1/2
11
11-1/2
12
13
14
15
16
17
18
1/2
3/4
1
1-1/4
1-1/2
1-3/4
2
2-1/4
2-3/8
2-7/16
2-1/2
2-3/4
2-7/8
3
2-257
4
5
6
7
8
9
10
11
12
13
14
15
16
I
R
ROUND ENDLESS BELTS

NEOPRENE
3/16 & 1/4 DIAMETER
Inch
MATERIAL:
T
1
2
3
Neoprene
Approx. 70 durometer compounded for
use in mechanical belt drives
5
6
7
8
9
10
11
12
13
14
15
16
-65F to +210F
These belts can be used with Companion Pulleys

and Grooved Pulleys, see index.
3% tolerance on circumference.
10% elongation is permissible.
INCH COMPONENT
Catalog Number
3/16 Diameter
A 6R11-06102
A 6R11-06106
A 6R11-06110
A 6R11-06113
A 6R11-06118
A 6R11-06120
A 6R11-06126
A 6R11-06130
A 6R11-06134
A 6R11-06140
A 6R11-06151
A 6R11-06157
A 6R11-06160
A 6R11-06164
A 6R11-06171
A 6R11-06181
A 6R11-06184
A 6R11-06188
A 6R11-06196
A 6R11-06204
A 6R11-06212
A 6R11-06220
A 6R11-06228
A 6R11-06236
A 6R11-06243
A 6R11-06251
A 6R11-06259
A 6R11-06267
A 6R11-06275
A 6R11-06283
A 6R11-06291
A 6R11-06298
A 6R11-06306
A 6R11-06314
A 6R11-06330
A 6R11-06346
A 6R11-06361
A 6R11-06377
A 6R11-06408
A 6R11-06440
A 6R11-06471
A 6R11-06503
A 6R11-06534
A 6R11-06565
2-258
DIAMETER
I.D.
INCH COMPONENT
I.D.
3-1/4
3-3/8
3-1/2
3-5/8
3-3/4
3-7/8
4
4-1/8
4-1/4
4-1/2
4-3/4
5
5-1/8
5-1/4
5-1/2
5-3/4
5-7/8
6
6-1/4
6-1/2
6-3/4
7
7-1/4
7-1/2
7-3/4
8
8-1/4
8-1/2
8-3/4
9
9-1/4
9-1/2
9-3/4
10
10-1/2
11
11-1/2
12
13
14
15
16
17
18
Catalog Number
3/16 Diameter
A 6R11-06597
A 6R11-06628
A 6R11-06660
A 6R11-06691
A 6R11-06723
A 6R11-06754
A 6R11-06785
A 6R11-06817
1/4 Diameter
A 6R11-08141
A 6R11-08151
A 6R11-08157
A 6R11-08160
A 6R11-08165
A 6R11-08173
A 6R11-08181
A 6R11-08184
A 6R11-08188
A 6R11-08196
A 6R11-08204
A 6R11-08210
A 6R11-08220
A 6R11-08228
A 6R11-08236
A 6R11-08246
A 6R11-08255
A 6R11-08262
A 6R11-08280
A 6R11-08300
A 6R11-08314
A 6R11-08324
A 6R11-08346
A 6R11-08350
A 6R11-08380
A 6R11-08393
A 6R11-08408
A 6R11-08420
A 6R11-08440
A 6R11-08456
A 6R11-08470
A 6R11-08487
A 6R11-08503
A 6R11-08518
A 6R11-08524
INCH COMPONENT
I.D.
19
20
21
22
23
24
25
26
4-1/2
4-3/4
5
5-1/8
5-1/4
5-1/2
5-3/4
5-7/8
6
6-1/4
6-1/2
6-3/4
7
7-1/4
7-1/2
7/3/4
8
8-1/2
9
9-1/2
10
10-1/2
11
11-1/2
12
12-1/2
13
13-1/2
14
14-1/2
15
15-1/2
16
16-1/2
17
Catalog Number
1/4 Diameter
A 6R11-08550
A 6R11-08565
A 6R11-08581
A 6R11-08590
A 6R11-08613
A 6R11-08628
A 6R11-08654
A 6R11-08691
A 6R11-08723
A 6R11-08754
A 6R11-08785
I.D.
17-1/2
18
18-1/2
19
19-1/2
20
21
22
23
24
25
ROUNTHANE BELTING & CONNECTORS

NONSLIP
3/16, 1/4 & 5/16 DIAMETER
MATERIAL:
Inch
Belting - Polyurethane
Connectors - Aluminum
-40 F to +150 F
INSTALLATIONS:
For Open Drives - Make belt endless and roll onto pulleys.
For Closed Drives - String belt around pulleys, insert
connector and roll onto pulleys.
2
3
O.D.
4
CONNECTOR
INCH COMPONENT
Catalog Number
Belting
Priced Per Foot
A 6R 1-A06
A 6R 1-A08
A 6R 1-A10
O.D.
Recommended
Minimum
Pulley Dia.
Coefficient
of
Friction
Catalog Number
Connectors
3/16
1/4
5/16
1-1/2
2
2-1/2
.5 to .7
.5 to .7
.5 to .7

A 6A 1-C06
A 6A 1-C08
A 6A 1-C10
These belts can be used with Companion Pulleys and Grooved Idlers, having diameters at least 8 times belt diameters.
See index.
7
8
9
Table No. 1 Installed Belt Tension

5/16
1/4
Table No. 2 Maximum hp Capacity

3/16
5/16
10
.6
Horsepower
Feet Per Minute
.7
3000
2000
1000
1/4
11
3/16
12
.5
.4
.3
.2
13
.1
2
4
6
8
10
% of Tape Line Measurement Shortening Required
1000
2000
3000
Feet Per Minute
14
Maximum Feet Per Minute for

Minimum Pulley Diameter
15
2-259
16
I
R
T
GROOVED IDLER PULLEYS

MOLDED OR STEEL
WITH STEEL BALL BEARINGS
HEAVY-DUTY
Inch
MOLDED PULLEYS
MATERIAL:
Pulley - Nylon
Bearing - Steel, Ball - Precision Machined
O.D. P
B C
2
E
3
4
5
6
7
INCH COMPONENT
Catalog Number
A
A
A
*A
A
A
A
A
A
A
A
A
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
6Z
9-00804
9-01004
9-01204
9-01604
9-01706
9-01708
9-02006
9-02008
9-02408
9-02412
9-02808
9-02812
P
Dia.
.020
.437
.500
.625
.813
.885
.885
1.063
1.063
1.250
1.250
1.373
1.373
.500
.625
.750
1.000
1.070
1.070
1.250
1.250
1.500
1.500
1.750
1.750
.020
O.D.
B
Bore
+.005
-.001
.125
.125
.125
.125
.187
.250
.187
.250
.250
.375
.250
.375
W
E
Width Length
R
Radius
(Ref.)
.010
.010
C
Dia.
.125
.125
.156
.156
.219
.219
.219
.219
.281
.281
.281
.281
.156
.156
.156
.171
.250
.250
.250
.250
.312
.312
.312
.312
.375
.375
.375
.500
.687
.687
.687
.687
1.000
1.000
1.000
1.000
.025
.015
.025
.025
.025
.025
.035
.035
.050
.050
.065
.065
.005
R
Radius
.096
.165
.190
.250
.315
.315
.025
.065
.050
.095
.125
.125
Load
For
Max. Rating
Cable lbf @
Dia. 500 rpm
3/64
1/32
3/64
3/64
3/64
3/64
1/16
1/16
3/32
3/32
1/8
1/8
10
10
10
35
35
35
45
45
80
70
80
70
* Supplied with a shielded bearing and a bore tolerance of .0005.
8
9
STEEL PULLEYS
MATERIAL:
10
Pulley - Steel, Case-Hardened Races,

Machined Raceways
Bearing - Steel, Ball - Precision
Finish - Zinc Plated
O.D. P
11
12
E
R
INCH COMPONENT
Catalog Number
13
14
A
A
A
A
A
A
6C
6C
6C
6C
6C
6C
9-00804
9-01606
9-01706
9-02008
9-02812
9-03212
15
16
2-260
P
Dia.
O.D.
.005
+.000
-.010
.375
.750
.875
.875
1.250
1.500
.500
1.000
1.063
1.250
1.750
2.000
B
Bore
+.005
-.001
.125
.187
.187
.250
.375
.375
E
W
Width Length
.005
.005
.156
.312
.250
.375
.438
.438
.188
.375
.282
.438
.500
.500
Load
For
Max. Rating
Cable lbf @
Dia. 500 rpm
3/64
1/8
3/32
3/16
1/4
1/4
36
145
175
175
290
410

MOLDED WITH OR WITHOUT SINTERED
BRONZE BEARINGS
LIGHT- OR MEDIUM-DUTY
R
Inch
PLAIN LIGHT-DUTY
MATERIAL:
Acetal, Black
O.D. P
INCH COMPONENT
Catalog Number
A
A
A
A
A
A
A
A
A
A
6M
6M
6M
6M
6M
6M
6M
6M
6M
6M
9-00604
9-00804
9-01004
9-01204
9-01606
9-02006
9-02408
9-02508
9-02808
9-03110
.02
B
Bore
W
Width
.01
R
Radius
(Ref.)
.375
.50
.625
.75
1.00
1.25
1.50
1.575
1.73
1.95
.128
.128
.128
.128
.190
.190
.254
.254
.254
.316
.093
.125
.125
.156
.17
.219
.281
.33
.281
.405
.015
.025
.015
.025
.025
.035
.050
.095
.065
.125
P
Dia.
O.D.
.31
.438
.50
.625
.813
1.063
1.25
1.225
1.375
1.58
.02
.005
For
Max.
Cable
Dia.
1/32
3/64
1/32
3/64
3/64
1/16
3/32
3/16
1/8
1/4
3
4
5
6
7
WITH SINTERED BRONZE BEARINGS - MEDIUM-DUTY
MATERIAL:
Pulley - Nylon
Bearing - Sintered Bronze
E
W
O.D. A
9
10
B P
11
INCH COMPONENT
Catalog Number
A
A
A
A
A
A
A
A
A
6T
6T
6T
6T
6T
6T
6T
6T
6T
9-01204
9-01706
9-01708
9-02006
9-02008
9-02408
9-02412
9-02808
9-02812
P
Dia.
O.D.
.625
.885
.885
1.063
1.063
1.25
1.25
1.375
1.375
.75
1.07
1.07
1.25
1.25
1.50
1.50
1.75
1.75
.02
.02
B
Bore
W
Width
E
Length
.127
.189
.252
.189
.252
.252
.377
.252
.377
.156
.219
.219
.219
.219
.281
.281
.281
.281
.187
.25
.25
.25
.25
.313
.313
.313
.313
.002
.01
.01
A
Dia.
R
Radius
(Ref.)
.38
.38
.38
.38
.38
.38
.50
.38
.50
.025
.025
.025
.035
.035
.050
.050
.065
.065
For
Max.
Cable
Dia.
3/64
3/64
3/64
1/16
1/16
3/32
3/32
1/8
1/8
2-261
12
13
14
15
16
I
R
T

MOLDED
PLAIN
MEDIUM-DUTY
Inch
MATERIAL:
Nylon - Gray, impregnated with

molybdenum disulfide
1
2
3
4
O.D.
6
7
INCH COMPONENT
Catalog Number
8
9
10
11
12
Solid
A 6M 9-04012
Webbed
A 6M 9-03912
A 6M 9-04012A
A 6M 9-04812
A 6M 9-04812A
A 6M 9-05612
A 6M 9-06412
A 6M 9-07212
A 6M 9-08016
Spoked & Webbed
A 6M 9-08816
A 6M 9-09616
A 6M 9-09616A
13
14
15
16
2-262
P
Dia.
O.D.
B
Bore
+.002
-.001
W
Face
Width
C
Dia.
R
Radius
For
Cable
Sizes
2.200
2.50
.375
.250
.050
1/16 3/32
1.875
2.000
2.500
2.563
3.000
3.375
3.875
4.375
2.44
2.50
3.00
3.00
3.50
4.00
4.50
5.00
.375
.375
.375
.375
.375
.375
.375
.500
.687
.438
.438
.625
.438
.500
.500
.500
1
1
1
1-7/16
1-1/2
1-1/2
2-3/8
2-3/8
3-1/16
3-7/16
3-7/8
4-3/8
.160
.110
.110
.190
.110
.140
.140
.140
1/8 5/16
1/8 3/16
1/8 3/16
1/8 3/8
1/8 3/16
3/16 1/4
3/16 1/4
3/16 1/4
4.625
5.125
5.250
5.50
6.00
6.00
.500
.500
.500
.625
.625
.625
1-1/2
1-1/2
1-1/2
5
5
5
.170
.200
.170
1/4 5/16
1/4 3/8
1/4 5/16
PRECISION GROOVED PULLEYS

FOR 1/8 ROUND BELT
1/8, 3/16 & 1/4 BORES
PIN OR CLAMP TYPE
R
Inch
MATERIAL:
303 Stainless Steel
Precision
Component
Groove has .062 Radius, .062 Deep
T
1
2
.187
.187
B/2
SUB DRILL
O.D.
A +.000
-.003
O.D.
BORE
B
BORE
.250
SET SCREW
.468
6
Pin-Type Hub
Clamp-Type Hub
INCH COMPONENT
Catalog Number
O.D.
Pin Type
Clamp Type
+.000
-.002
S1083Y-PA-02
S1083Y-PA-03
S1083Y-PA-04
S1083Y-PA-05
S1083Y-PA-06
S1084Y-PB-01
S1084Y-PB-02
S1084Y-PB-03
S1084Y-PB-04
S1084Y-PB-05
S1084Y-PB-06
S1086Y-PC-01
S1086Y-PC-02
S1086Y-PC-03
S1086Y-PC-04
S1086Y-PC-05
S1086Y-PC-06
S1086Y-PC-07
S1086Y-PC-08
S1183Y-PD-01
S1183Y-PD-02
S1183Y-PD-03
S1183Y-PD-04
S1183Y-PD-05
S1183Y-PD-06
S1184Y-PE-01
S1184Y-PE-02
S1184Y-PE-03
S1184Y-PE-04
S1184Y-PE-05
S1184Y-PE-06
S1186Y-PF-01
S1186Y-PF-02
S1186Y-PF-03
S1186Y-PF-04
S1186Y-PF-05
S1186Y-PF-06
S1186Y-PF-07
S1186Y-PF-08
.500
.750
1.000
1.500
2.000
2.500
.500
.750
1.000
1.500
2.000
2.500
.500
.750
1.000
1.500
2.000
2.500
3.000
3.500
Bore
Pin Type
+.0005
-.0000
Pin
Clamp
.1248
.1248
.1248
.1248
.1248
.1248
.1873
.1873
.1873
.1873
.1873
.1873
.2498
.2498
.2498
.2498
.2498
.2498
.2498
.2498
.312
.312
.312
.312
.312
.312
.375
.375
.375
.375
.375
.375
.500
.500
.500
.500
.500
.500
.500
.500
.188
.188
.188
.188
.188
.188
.250
.250
.250
.250
.250
.250
.312
.312
.312
.312
.312
.312
.312
.312
Set
Screw
Sub
Drill
.187
.187
.187
.187
.187
.187
.218
.218
.218
.218
.218
.218
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
.312
.312
.312
.312
.312
.312
.375
.375
.375
.375
.375
.375
.375
.375
#2-56
#2-56
#2-56
#2-56
#2-56
#2-56
#4-40
#4-40
#4-40
#4-40
#4-40
#4-40
#6-32
#6-32
#6-32
#6-32
#6-32
#6-32
#6-32
#6-32
.029
.029
.029
.029
.029
.029
.040
.040
.040
.040
.040
.040
.086
.086
.086
.086
.086
.086
.086
.086
7
8
9
10
11
12
13
14
15
2-263
16
GROOVED PULLEYS
FOR 1/16 DIA. ROUND BELTS

MOLDED WITH INSERT
1/8 FACE
Inch
MATERIAL:
Body - Acetal
Insert - Brass
1
5/8
1/8
1/2
1/4
SET SCREW
SPOT DRILL
O.D.
INSERT
5
1/32
6
7
8
9
10
11
INCH COMPONENT
Catalog Number
For 1/16 Dia. Round Belts
A 6T10-1220404
A 6T10-1220604
A 6T10-1221004
A 6T10-1221404
A 6T10-1222004
A 6T10-1220406
A 6T10-1220606
A 6T10-1221006
A 6T10-1221406
A 6T10-1222006
A 6T10-1221008
A 6T10-1221408
A 6T10-1222008
A 6T10-1222408
12
13
14
15
16
1/16
2-264
O.D.
B
Bore
+.001
-.000
C
Hub
Dia.
Set
Screw
.500
.750
1.000
1.500
2.000
.500
.750
1.000
1.500
2.000
1.000
1.500
2.000
2.500
.125
.125
.125
.125
.125
.1875
.1875
.1875
.1875
.1875
.250
.250
.250
.250
5/8
5/8
5/8
3/4
1
5/8
5/8
5/8
3/4
1
5/8
3/4
1
1
#4-40
#4-40
#4-40
#4-40
#4-40
#4-40
#4-40
#4-40
#4-40
#4-40
#6-32
#6-32
#6-32
#6-32
GROOVED PULLEYS
FOR 3/32 & 1/8 DIA. ROUND BELTS
MOLDED WITH INSERT
3/16 FACE
R
Inch
MATERIAL:
Body - Acetal
Insert - Brass
T
1
11/16
3/16
1/2
1/4
SET SCREW
SPOT DRILL
O.D.
INSERT
5
G/2
G
INCH COMPONENT
Catalog Number
A 6T10-1230404
A 6T10-1230604
A 6T10-1231004
A 6T10-1231404
A 6T10-1232004
A 6T10-1230406
A 6T10-1230606
A 6T10-1231006
A 6T10-1231406
A 6T10-1232006
A 6T10-1231008
A 6T10-1231408
A 6T10-1232008
A 6T10-1232408
A 6T10-1240404
A 6T10-1240604
A 6T10-1241004
A 6T10-1241404
A 6T10-1242004
A 6T10-1240406
A 6T10-1240606
A 6T10-1241006
A 6T10-1241406
A 6T10-1242006
A 6T10-1240408
A 6T10-1240608
A 6T10-1241008
A 6T10-1241408
A 6T10-1242008
A 6T10-1242408
O.D.
B
Bore
+.001
-.000
C
Hub
Dia.
G
Groove
Width
Set
Screw
.500
.750
1.000
1.500
2.000
.500
.750
1.000
1.500
2.000
1.000
1.500
2.000
2.500
.125
.125
.125
.125
.125
.1875
.1875
.1875
.1875
.1875
.250
.250
.250
.250
5/8
5/8
5/8
3/4
1
5/8
5/8
5/8
3/4
1
5/8
3/4
1
1
3/32
3/32
3/32
3/32
3/32
3/32
3/32
3/32
3/32
3/32
3/32
3/32
3/32
3/32
#4-40
#4-40
#4-40
#4-40
#4-40
#4-40
#4-40
#4-40
#4-40
#4-40
#6-32
#6-32
#6-32
#6-32
.500
.750
1.000
1.500
2.000
.500
.750
1.000
1.500
2.000
.500
.750
1.000
1.500
2.000
2.500
.125
.125
.125
.125
.125
.1875
.1875
.1875
.1875
.1875
.250
.250
.250
.250
.250
.250
5/8
5/8
5/8
3/4
1
5/8
5/8
5/8
3/4
1
5/8
5/8
5/8
3/4
1
1
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
#4-40
#4-40
#4-40
#4-40
#4-40
#4-40
#4-40
#4-40
#4-40
#4-40
#6-32
#6-32
#6-32
#6-32
#6-32
#6-32
2-265
7
8
9
10
11
12
13
14
15
16
I
R
T
FLAT BELTS
1/4 WIDE
HIGH-SPEED
MATERIAL:
Inch
1 Ply Polyester Woven Cord,

Black Neoprene Coating
SPECIFICATIONS:
1
2
Maximum Belt Speed: 20000 fpm

Working Tension: .5 to 6 lbf
Length Tolerance: 0.5%
Minimum Pulley Size: 1/4 Diameter
Breaking Strength: 250 lbf
Special Widths - cut to size from sleeves

available from stock.
3
4
5
6
1/4
.020/.016
7
INCH COMPONENT
8
9
10
11
12
Catalog Number
A
A
A
A
A
A
A
A
A
A
A
A
A
A
6R19-18025
6R19-19025
6R19-20025
6R19-22525
6R19-25025
6R19-27525
6R19-30025
6R19-32525
6R19-35025
6R19-37525
6R19-40025
6R19-42525
6R19-47525
6R19-50025
13
14
15
16
2-266
Length
mm
Inch
180
190
200
225
250
275
300
325
350
375
400
425
475
500
7.09
7.48
7.87
8.86
9.84
10.83
11.81
12.80
13.78
14.76
15.75
16.73
18.70
19.69
FLAT BELT PULLEYS

FOR 1/4" FLAT BELTS
MOLDED WITH INSERT
MACHINED O.D.
R
Inch
MATERIAL:

Insert - Aluminum, Knurled - Clear Anodized
Brass, Knurled
Pulleys with nonstandard diameters or of special

design are available custom-made to your drawings.
T
1
2
3
11/16
1/8
.090 WEB
11/16
O.D. 5/16
3/8
#6-32
SET
SCREW
#6-32
SET
SCREW
1/8
B 1/2
1/4
B 11/16
O.D. 7/16
SPOT
DRILL
SPOT
DRILL
INCH COMPONENT
Catalog Number
B
Bore
O.D.
mm
Inch
+.001
-.000
Fig. 1
Fig. 2
A
A
A
A
A
A
A
A
A
A
6T19-132506
6T19-132508
6T19-152506
6T19-152508
6T19-172506
6T19-172508
6T19-182506
6T19-182508
6T19-202506
6T19-202508
13
13
15
15
17
17
18
18
20
20
.512
.512
.591
.591
.669
.669
.709
.709
.787
.787
.1875
.250
.1875
.250
.1875
.250
.1875
.250
.1875
.250
A
A
A
A
A
A
A
A
6T19-232506
6T19-232508
6T19-242506
6T19-242508
6T19-262506
6T19-262508
6T19-282506
6T19-282508
23
23
24
24
26
26
28
28
.906
.906
.945
.945
1.024
1.024
1.102
1.102
.1875
.250
.1875
.250
.1875
.250
.1875
.250
Fig. 2
A 6T19-362506
A 6T19-362508
A 6T19-392506
A 6T19-392508
A 6T19-442506
A 6T19-442508
A 6T19-492506
A 6T19-492508
A 6T19-552506
A 6T19-552508
A 6T19-622506
A 6T19-622508
A 6T19-682506
A 6T19-682508
A 6T19-752506
A 6T19-752508
A 6T19-812506
A 6T19-812508
6
7
Fig. 2
Brass Insert
Catalog Number
1/4
3/8
Fig. 1
Aluminum Insert
B
Bore
O.D.
mm
Inch
+.001
-.000
36
36
39
39
44
44
49
49
55
55
62
62
68
68
75
75
81
81
1.417
1.417
1.535
1.535
1.732
1.732
1.929
1.929
2.165
2.165
2.441
2.441
2.677
2.677
2.953
2.953
3.189
3.189
.1875
.250
.1875
.250
.1875
.250
.1875
.250
.1875
.250
.1875
.250
.1875
.250
.1875
.250
.1875
.250
8
9
10
11
12
13
14
15
2-267
16
I
R
FRACTIONAL H.P. V-BELTS

OIL & HEAT RESISTANT
STATIC DISSIPATING
MATERIAL:
Inch
Reinforced Rubber
Standard or Grip Notch type belts will

be supplied at SDP option.
0
STANDARD TYPE
1
2
GRIP NOTCH TYPE
3
.26
4
5
.15
6
7
8
INCH COMPONENT
9
10
11
12
13
14
Catalog Number
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
6R12-2L100
6R12-2L110
6R12-2L120
6R12-2L140
6R12-2L150
6R12-2L160
6R12-2L180
6R12-2L200
6R12-2L220
6R12-2L240
6R12-2L270
6R12-2L280
6R12-2L285
6R12-2L290
6R12-2L300
6R12-2L320
6R12-2L325
15
16
2-268
Outside
Length
(Ref.)
Pitch
Length
10
11
12
14
15
16
18
20
22
24
27
28
28-1/2
29
30
32
32-1/2
9.6
10.6
11.6
13.6
14.6
15.6
17.6
19.6
21.6
23.6
26.6
27.6
28.1
28.6
29.6
31.6
32.1
COMPANION PULLEYS
FOR 1/4 V-BELTS
MOLDED & MOLDED WITH INSERT
MATERIAL:
Inch
Fig. 1 - Nylon
Fig. 2 - Body - Nylon
Hub - Aluminum
T
1
11/16
23/64
B
#10-24 SET SCREW
3/16
P.D.
O.D.
1/4
Fig. 1
7/8
27/64
3/8
1 O.D. x 5/8 I.D.

x .035 THICK
STEEL DISC
3/16
#10-24
SET SCREW
7/8
5/8
3/32
P.D.
O.D.
1/4
W
A
1 HUB
6 RIBS EQUALLY SPACED
2.4
Fig. 2
INCH COMPONENT
Catalog Number
P.D.
Fig. 1 Nylon
.9
A 6T10-0121008
.9
A 6T10-0121010
Fig. 2 Body - Nylon, Hub - Aluminum
1.4
A 6Z10-0121508
1.4
A 6Z10-0121510
1.4
A 6Z10-0121512
1.4
A 6Z10-0121516
1.9
A 6Z10-0122008
1.9
A 6Z10-0122010
1.9
A 6Z10-0122012
1.9
A 6Z10-0122016
2.4
A 6Z10-0122508
2.4
A 6Z10-0122510
2.4
A 6Z10-0122512
2.4
A 6Z10-0122516
2.9
A 6Z10-0123008
2.9
A 6Z10-0123010
2.9
A 6Z10-0123012
2.9
A 6Z10-0123016
O.D.
B
Bore
1.0
1.0
1.5
1.5
1.5
1.5
2.0
2.0
2.0
2.0
2.5
2.5
2.5
2.5
3.0
3.0
3.0
3.0
W
Width
A
Angle
.2505
.313
.240
.240
32
32
.2505
.313
.3755
.5005
.2505
.313
.3755
.5005
.2505
.313
.3755
.5005
.2505
.313
.3755
.5005
.243
.243
.243
.243
.246
.246
.246
.246
.246
.246
.246
.246
.250
.250
.250
.250
34
34
34
34
36
36
36
36
36
36
36
36
38
38
38
38
+.001
-.000
2-269
9
10
11
12
13
14
15
16
I
R
T
COMPANION PULLEYS
FOR 1/4 V-BELTS
MOLDED WITH INSERT
MATERIAL:
Inch
Body - Nylon
Hub - Aluminum
1
2
3
4
5
7/8
27/64
3/8
1 O.D. X 5/8 I.D.

X .035 THICK
STEEL DISC
3/16
#10-24 SET SCREW

7/8
5/8
P.D.
1/4
3/32
O.D.
3/32
1 HUB OF WEBBED PORTION
.250
38
3/32
6 RIBS EQUALLY SPACED
INCH COMPONENT
9
10
11
12
13
14
15
16
Catalog Number
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
6Z10-0123508
6Z10-0123510
6Z10-0123512
6Z10-0123516
6Z10-0124008
6Z10-0124010
6Z10-0124012
6Z10-0124016
6Z10-0124508
6Z10-0124510
6Z10-0124512
6Z10-0124516
6Z10-0125008
6Z10-0125010
6Z10-0125012
6Z10-0125016
6Z10-0126008
6Z10-0126010
6Z10-0126012
6Z10-0126016
2-270
P.D.
O.D.
3.4
3.4
3.4
3.4
3.9
3.9
3.9
3.9
4.4
4.4
4.4
4.4
4.9
4.9
4.9
4.9
5.9
5.9
5.9
5.9
3.5
3.5
3.5
3.5
4.0
4.0
4.0
4.0
4.5
4.5
4.5
4.5
5.0
5.0
5.0
5.0
6.0
6.0
6.0
6.0
B
Bore
+.001
-.000
.2505
.313
.3755
.5005
.2505
.313
.3755
.5005
.2505
.313
.3755
.5005
.2505
.313
.3755
.5005
.2505
.313
.3755
.5005
IDLER PULLEYS WITH NEEDLE BEARINGS

3/16, 1/4 & 1/2 BORE
NEEDLE BEARINGS
R
Inch
MATERIAL:
Pulley - Steel
Bearing - Needle Type
E
D
3/4
11/16
(TYP)
B C 1-3/8
O.D. 1.07
B C
O.D.
3
4
J
Fig. 1 Flat Belts
E
F
T
1
Fig. 2 "V" Belts 3/8 & 1/2 Wide
6
F
B
O.D.
O.D.
B C
8
Fig. 3 Sprockets
.1475 & .250 Pitch
Fig. 4 Timing Pulleys 1/5 Pitch

and 3 & 5 mm HTD
10
INCH COMPONENT
Catalog Number
Fig. 1 - Flat Belts
A 6Z 9-016NID
Fig. 2 - V Belts
A 6Z 9-016NOK17
A 6Z 9-016NAK25
A 6Z 9-016NAK30
Fig. 3 - Sprockets
A 6Z 9-008HN14
A 6Z 9-016HN25
Fig. 4 - Timing Pulleys
A 6Z 9-01622XL
A 6Z 9-016225H
A 6Z 9-008283H
No.
of
O.D.
Teeth
F
C
B
E
Face Length
Hub
Bore Width
Dia.
D
Hub
Proj.
Shaft Belt or
J
Chain
Dim. Length
(Ref.)
Size
1.750
1/2
9/16
7/8
1-1/4
1/8
1/8
1-1/2
1.920
2.500
3.050
1/2
1/2
1/2
1/2
21/32
21/32
3/4
29/32
29/32
1-3/8
1-3/8
1-9/16
1/4
1/4
1/4
5/32
5/32
1-1/2
1-1/2
1-1/2
3/8
1/2
1/2
16
19
.808
1.650
1/4
1/2
1/16
7/64
11/32
3/4
9/16
1-7/32
9/32
41/64
3/64
1-1/2
.1475 Pitch
.250 Pitch
22
22
28
1.381
1.334
1.023
1/2
1/2
1/4
3/4
3/4
1/2
1-1/2 1/5" Pitch

1-1/2 5 mm HTD
3 mm HTD
2-271
11
12
13
14
15
16
Y
D
E
R IV
L
L
ES
U
EE
DESIGN A
O
T
D
Inch
YS
TE
M?
3
4
5
6
7
8
9
10
11
12
AVAILABLE AT:
www.sdp-si.com
13
OR CALL:
516-328-3300
14
WE'VE MADE IT
EASY WITH OUR...
CENTER DISTANCE
DESIGNER PROGRAM
Allows the design of a pulley drive system
using our belt and pulley database.
Allows locating catalog pages featuring belts
and pulleys used.
Calculates minimum and actual center
distances, speed ratios and teeth in mesh
(T.I.M.) for both pulleys.
Compiles two convenient tables:
a) A table of center distances vs. number of
belt teeth. It displays five sizes larger and
five sizes smaller stock belts than the actual
belt length.
b) A table of all pulley pairs within specified
speed ratio range.
Exportable .DXF and .DWF drawings.

15 CENTER DISTANCE
CALCULATOR
2-272
16
3 - SHAFTING
Catalog
Series
S4008Y-US1...
S4012Y-US2...
S4016Y-US3...
S40PX0-HG
Material
Hardness
in.
Length
in.
R
Pages
Inch
.12475
.18725
.24975
1 to 10
3-2
416 Stainless Steel,

Cond. T,
Hardened & Ground
Rc 26 - 32
.1247
.1872
.2497
.3747
.4997
1 to 24
3-3 & 3-4
AISI C 1060 Steel,

Hardened & Ground
Case Hardened
to Rc 60 - 63
.2500
.3750
.5000
.7500
3 to 36
Case Hardened
to Rc 52 - 56
.3750
.5000
.6250
.7500
3 to 36
.0311 to .7500
12 to 36
3-7
1 to 16-7/8
3-8 thru 3-11
3 to 36
3-12
12 to 36
3-13

Ultraprecision Ground
S40PH0-CHS

Hardened & Ground
S40PX0-CHS
A 7X 1-
Undersize, Nominal &
Oversized Diameters
Diameter

Ground
Aluminum 6061-T6
Hard Anodized
.1247
.1872
.2497
.3122
.3747
.4997
1
2
3
3-5
4
5
3-6
6
7
8
9
Rc 60
.3750 to 2
10
S40AW6-...
A 7C 1-
AISI 12L14
Cold Rolled Steel, Drawn
.1562 to .5000
6 to 36
3-14
11
12
A 7Q 1-
S49PHO...
Plain or Predrilled
S49PX0...
Plain or Predrilled
AISI 1045
Tool Steel, Ground
AISI C 1060 Steel
AISI 440C
Stainless Steel
Case Hardened
to Rc 60 - 63
Case Hardened
to Rc 50 - 55
1/8 to 1
36
3-14
.2495 / .2490
to
1.2495 / 1.2490
24, 48 or 72
3-15
13
14
15
3-1
16
ULTRAPRECISION GROUND SHAFTING

MATERIAL:
303 Stainless Steel
STRAIGHTNESS:
Inch
.0002 inches per inch
Other lengths available

on special order.
1
Precision
Component
1
2
4
5
6
L .010
D +.0000
-.0001
INCH COMPONENT
CATALOG NUMBER
D Diameter .12475: S 4 0 0 8 Y - U S 1
D Diameter .18725: S 4 0 1 2 Y - U S 2
D Diameter .24975: S 4 0 1 6 Y - U S 3
Length
Code
7
8
9
10
11
12
13
14
15
16
.01 x 45 CHAMFER
BOTH ENDS
3-2
Length
Code
L
Length
Length
Code
L
Length
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
1.000
1.125
1.250
1.375
1.500
1.625
1.750
1.875
2.000
2.125
2.250
2.375
2.500
2.625
2.750
2.875
3.000
3.125
3.250
3.375
3.500
3.625
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
48
52
56
60
64
68
72
80
3.750
3.875
4.000
4.125
4.250
4.375
4.500
4.625
4.750
4.875
5.000
5.125
5.250
5.375
5.500
6.000
6.500
7.000
7.500
8.000
8.500
9.000
10.000
HARDENED PRECISION GROUND SHAFTING

MATERIAL:
416 Stainless Steel Cond. T (Rc 26-32)
STRAIGHTNESS:
Inch
Grooving, other lengths and diameters

available on special order.
1
Precision
Component
T
1
2
10-12
D +.0000
-.0002
1/64 x 45 CHAMFER
BOTH ENDS
4
5
INCH COMPONENT
L
Length
Catalog Number
D Diameter
.1247
D Diameter
.1872
D Diameter
.2497
D Diameter
.3747
D Diameter
.4997
.010
in.
S40PX0-HG2-008
S40PX0-HG2-010
S40PX0-HG2-012
S40PX0-HG2-014
S40PX0-HG2-016
S40PX0-HG2-018
S40PX0-HG2-020
S40PX0-HG2-022
S40PX0-HG2-024
S40PX0-HG2-026
S40PX0-HG2-028
S40PX0-HG2-030
S40PX0-HG2-032
S40PX0-HG2-034
S40PX0-HG2-036
S40PX0-HG2-038
S40PX0-HG2-040
S40PX0-HG2-042
S40PX0-HG2-044
S40PX0-HG2-046
S40PX0-HG2-048
S40PX0-HG2-050
S40PX0-HG2-052
S40PX0-HG2-054
S40PX0-HG2-056
S40PX0-HG2-058
S40PX0-HG2-060
S40PX0-HG2-062
S40PX0-HG2-064
S40PX0-HG3-008
S40PX0-HG3-010
S40PX0-HG3-012
S40PX0-HG3-014
S40PX0-HG3-016
S40PX0-HG3-018
S40PX0-HG3-020
S40PX0-HG3-022
S40PX0-HG3-024
S40PX0-HG3-026
S40PX0-HG3-028
S40PX0-HG3-030
S40PX0-HG3-032
S40PX0-HG3-034
S40PX0-HG3-036
S40PX0-HG3-038
S40PX0-HG3-040
S40PX0-HG3-042
S40PX0-HG3-044
S40PX0-HG3-046
S40PX0-HG3-048
S40PX0-HG3-050
S40PX0-HG3-052
S40PX0-HG3-054
S40PX0-HG3-056
S40PX0-HG3-058
S40PX0-HG3-060
S40PX0-HG3-062
S40PX0-HG3-064
S40PX0-HG4-008
S40PX0-HG4-010
S40PX0-HG4-012
S40PX0-HG4-014
S40PX0-HG4-016
S40PX0-HG4-018
S40PX0-HG4-020
S40PX0-HG4-022
S40PX0-HG4-024
S40PX0-HG4-026
S40PX0-HG4-028
S40PX0-HG4-030
S40PX0-HG4-032
S40PX0-HG4-034
S40PX0-HG4-036
S40PX0-HG4-038
S40PX0-HG4-040
S40PX0-HG4-042
S40PX0-HG4-044
S40PX0-HG4-046
S40PX0-HG4-048
S40PX0-HG4-050
S40PX0-HG4-052
S40PX0-HG4-054
S40PX0-HG4-056
S40PX0-HG4-058
S40PX0-HG4-060
S40PX0-HG4-062
S40PX0-HG4-064
S40PX0-HG5-008
S40PX0-HG5-010
S40PX0-HG5-012
S40PX0-HG5-014
S40PX0-HG5-016
S40PX0-HG5-018
S40PX0-HG5-020
S40PX0-HG5-022
S40PX0-HG5-024
S40PX0-HG5-026
S40PX0-HG5-028
S40PX0-HG5-030
S40PX0-HG5-032
S40PX0-HG5-034
S40PX0-HG5-036
S40PX0-HG5-038
S40PX0-HG5-040
S40PX0-HG5-042
S40PX0-HG5-044
S40PX0-HG5-046
S40PX0-HG5-048
S40PX0-HG5-050
S40PX0-HG5-052
S40PX0-HG5-054
S40PX0-HG5-056
S40PX0-HG5-058
S40PX0-HG5-060
S40PX0-HG5-062
S40PX0-HG5-064
S40PX0-HG6-008
S40PX0-HG6-010
S40PX0-HG6-012
S40PX0-HG6-014
S40PX0-HG6-016
S40PX0-HG6-018
S40PX0-HG6-020
S40PX0-HG6-022
S40PX0-HG6-024
S40PX0-HG6-026
S40PX0-HG6-028
S40PX0-HG6-030
S40PX0-HG6-032
S40PX0-HG6-034
S40PX0-HG6-036
S40PX0-HG6-038
S40PX0-HG6-040
S40PX0-HG6-042
S40PX0-HG6-044
S40PX0-HG6-046
S40PX0-HG6-048
S40PX0-HG6-050
S40PX0-HG6-052
S40PX0-HG6-054
S40PX0-HG6-056
S40PX0-HG6-058
S40PX0-HG6-060
S40PX0-HG6-062
S40PX0-HG6-064
1
1-1/4
1-1/2
1-3/4
2
2-1/4
2-1/2
2-3/4
3
3-1/4
3-1/2
3-3/4
4
4-1/4
4-1/2
4-3/4
5
5-1/4
5-1/2
5-3/4
6
6-1/4
6-1/2
6-3/4
7
7-1/4
7-1/2
7-3/4
8
6
7
8
9
10
11
12
13
14
15
3-3
16

MATERIAL:
416 Stainless Steel Cond. T (Rc 26-32)
STRAIGHTNESS:
Inch
Grooving, other lengths and diameters

Precision
Component
1
2
10-12
1/64 x 45 CHAMFER
BOTH ENDS
3
D +.0000
-.0002
INCH COMPONENT
5
6
7
8
9
10
11
L
Length
Catalog Number
D Diameter
.1247
D Diameter
.1872
D Diameter
.2497
.010
in.
S40PX0-HG2-066
S40PX0-HG2-068
S40PX0-HG2-070
S40PX0-HG2-072
S40PX0-HG2-074
S40PX0-HG2-076
S40PX0-HG2-078
S40PX0-HG2-080
S40PX0-HG2-084
S40PX0-HG2-088
S40PX0-HG2-092
S40PX0-HG2-096
S40PX0-HG2-100
S40PX0-HG2-104
S40PX0-HG2-112
S40PX0-HG2-120
S40PX0-HG2-128
S40PX0-HG2-192
S40PX0-HG3-066
S40PX0-HG3-068
S40PX0-HG3-070
S40PX0-HG3-072
S40PX0-HG3-074
S40PX0-HG3-076
S40PX0-HG3-078
S40PX0-HG3-080
S40PX0-HG3-084
S40PX0-HG3-088
S40PX0-HG3-092
S40PX0-HG3-096
S40PX0-HG3-100
S40PX0-HG3-104
S40PX0-HG3-112
S40PX0-HG3-120
S40PX0-HG3-128
S40PX0-HG3-192
S40PX0-HG4-066
S40PX0-HG4-068
S40PX0-HG4-070
S40PX0-HG4-072
S40PX0-HG4-074
S40PX0-HG4-076
S40PX0-HG4-078
S40PX0-HG4-080
S40PX0-HG4-084
S40PX0-HG4-088
S40PX0-HG4-092
S40PX0-HG4-096
S40PX0-HG4-100
S40PX0-HG4-104
S40PX0-HG4-112
S40PX0-HG4-120
S40PX0-HG4-128
S40PX0-HG4-192
8-1/4
8-1/2
8-3/4
9
9-1/4
9-1/2
9-3/4
10
10-1/2
11
11-1/2
12
12-1/2
13
14
15
16
24
12
13
14
15
16
3-4

MATERIAL:
Steel AISI C 1060, Case Hardened to Rc 60-63
STRAIGHTNESS:
Inch
SPECIFICATIONS:
Precision
Component
Minimum Depth of Hardness:

1/4" & 3/8" diameters is .031"
1/2" & 3/4" diameters is .051"
T
1
2
10-16
1/64 x 45 CHAMFER
BOTH ENDS
3
D -.0005
-.0010
INCH COMPONENT
L
Length
Catalog Number
D Diameter
.2500
D Diameter
.3750
D Diameter
.5000
D Diameter
.7500
1/32
in.
S40PH0-CHS2-006
S40PH0-CHS2-007
S40PH0-CHS2-008
S40PH0-CHS2-009
S40PH0-CHS2-010
S40PH0-CHS2-011
S40PH0-CHS2-012
S40PH0-CHS2-013
S40PH0-CHS2-014
S40PH0-CHS2-015
S40PH0-CHS2-016
S40PH0-CHS2-017
S40PH0-CHS2-018
S40PH0-CHS2-019
S40PH0-CHS2-020
S40PH0-CHS2-022
S40PH0-CHS2-024
S40PH0-CHS2-026
S40PH0-CHS2-028
S40PH0-CHS2-030
S40PH0-CHS2-032
S40PH0-CHS2-034
S40PH0-CHS2-036
S40PH0-CHS2-038
S40PH0-CHS2-040
S40PH0-CHS2-044
S40PH0-CHS2-048
S40PH0-CHS2-052
S40PH0-CHS2-056
S40PH0-CHS2-060
S40PH0-CHS2-064
S40PH0-CHS2-068
S40PH0-CHS2-072
S40PH0-CHS3-006
S40PH0-CHS3-007
S40PH0-CHS3-008
S40PH0-CHS3-009
S40PH0-CHS3-010
S40PH0-CHS3-011
S40PH0-CHS3-012
S40PH0-CHS3-013
S40PH0-CHS3-014
S40PH0-CHS3-015
S40PH0-CHS3-016
S40PH0-CHS3-017
S40PH0-CHS3-018
S40PH0-CHS3-019
S40PH0-CHS3-020
S40PH0-CHS3-022
S40PH0-CHS3-024
S40PH0-CHS3-026
S40PH0-CHS3-028
S40PH0-CHS3-030
S40PH0-CHS3-032
S40PH0-CHS3-034
S40PH0-CHS3-036
S40PH0-CHS3-038
S40PH0-CHS3-040
S40PH0-CHS3-044
S40PH0-CHS3-048
S40PH0-CHS3-052
S40PH0-CHS3-056
S40PH0-CHS3-060
S40PH0-CHS3-064
S40PH0-CHS3-068
S40PH0-CHS3-072
S40PH0-CHS4-006
S40PH0-CHS4-007
S40PH0-CHS4-008
S40PH0-CHS4-009
S40PH0-CHS4-010
S40PH0-CHS4-011
S40PH0-CHS4-012
S40PH0-CHS4-013
S40PH0-CHS4-014
S40PH0-CHS4-015
S40PH0-CHS4-016
S40PH0-CHS4-017
S40PH0-CHS4-018
S40PH0-CHS4-019
S40PH0-CHS4-020
S40PH0-CHS4-022
S40PH0-CHS4-024
S40PH0-CHS4-026
S40PH0-CHS4-028
S40PH0-CHS4-030
S40PH0-CHS4-032
S40PH0-CHS4-034
S40PH0-CHS4-036
S40PH0-CHS4-038
S40PH0-CHS4-040
S40PH0-CHS4-044
S40PH0-CHS4-048
S40PH0-CHS4-052
S40PH0-CHS4-056
S40PH0-CHS4-060
S40PH0-CHS4-064
S40PH0-CHS4-068
S40PH0-CHS4-072
S40PH0-CHS6-006
S40PH0-CHS6-007
S40PH0-CHS6-008
S40PH0-CHS6-009
S40PH0-CHS6-010
S40PH0-CHS6-011
S40PH0-CHS6-012
S40PH0-CHS6-013
S40PH0-CHS6-014
S40PH0-CHS6-015
S40PH0-CHS6-016
S40PH0-CHS6-017
S40PH0-CHS6-018
S40PH0-CHS6-019
S40PH0-CHS6-020
S40PH0-CHS6-022
S40PH0-CHS6-024
S40PH0-CHS6-026
S40PH0-CHS6-028
S40PH0-CHS6-030
S40PH0-CHS6-032
S40PH0-CHS6-034
S40PH0-CHS6-036
S40PH0-CHS6-038
S40PH0-CHS6-040
S40PH0-CHS6-044
S40PH0-CHS6-048
S40PH0-CHS6-052
S40PH0-CHS6-056
S40PH0-CHS6-060
S40PH0-CHS6-064
S40PH0-CHS6-068
S40PH0-CHS6-072
3
3-1/2
4
4-1/2
5
5-1/2
6
6-1/2
7
7-1/2
8
8-1/2
9
9-1/2
10
11
12
13
14
15
16
17
18
19
20
22
24
26
28
30
32
34
36
5
6
7
8
9
10
11
12
13
14
15
3-5
16

MATERIAL:
420 Stainless Steel, Case Hardened to Rc 52-56
STRAIGHTNESS:
Inch
1
2
12 MAX
1/64 x 45 CHAMFER
BOTH ENDS
3
D +.0005
-.0010
7
8
9
10
11
12
13
14
15
16
INCH COMPONENT
5
6
1
Precision
Component
L
Length
Catalog Number
D Diameter
.3750
D Diameter
.5000
D Diameter
.6250
D Diameter
.7500
1/32
in.
S40PX0-CHS3-006
S40PX0-CHS3-007
S40PX0-CHS3-008
S40PX0-CHS3-009
S40PX0-CHS3-010
S40PX0-CHS3-011
S40PX0-CHS3-012
S40PX0-CHS3-013
S40PX0-CHS3-014
S40PX0-CHS3-015
S40PX0-CHS3-016
S40PX0-CHS3-017
S40PX0-CHS3-018
S40PX0-CHS3-019
S40PX0-CHS3-020
S40PX0-CHS3-022
S40PX0-CHS3-024
S40PX0-CHS3-026
S40PX0-CHS3-028
S40PX0-CHS3-030
S40PX0-CHS3-032
S40PX0-CHS3-034
S40PX0-CHS3-036
S40PX0-CHS3-038
S40PX0-CHS3-040
S40PX0-CHS3-044
S40PX0-CHS3-048
S40PX0-CHS3-052
S40PX0-CHS3-056
S40PX0-CHS3-060
S40PX0-CHS3-064
S40PX0-CHS3-068
S40PX0-CHS3-072
S40PX0-CHS4-006
S40PX0-CHS4-007
S40PX0-CHS4-008
S40PX0-CHS4-009
S40PX0-CHS4-010
S40PX0-CHS4-011
S40PX0-CHS4-012
S40PX0-CHS4-013
S40PX0-CHS4-014
S40PX0-CHS4-015
S40PX0-CHS4-016
S40PX0-CHS4-017
S40PX0-CHS4-018
S40PX0-CHS4-019
S40PX0-CHS4-020
S40PX0-CHS4-022
S40PX0-CHS4-024
S40PX0-CHS4-026
S40PX0-CHS4-028
S40PX0-CHS4-030
S40PX0-CHS4-032
S40PX0-CHS4-034
S40PX0-CHS4-036
S40PX0-CHS4-038
S40PX0-CHS4-040
S40PX0-CHS4-044
S40PX0-CHS4-048
S40PX0-CHS4-052
S40PX0-CHS4-056
S40PX0-CHS4-060
S40PX0-CHS4-064
S40PX0-CHS4-068
S40PX0-CHS4-072
S40PX0-CHS5-006
S40PX0-CHS5-007
S40PX0-CHS5-008
S40PX0-CHS5-009
S40PX0-CHS5-010
S40PX0-CHS5-011
S40PX0-CHS5-012
S40PX0-CHS5-013
S40PX0-CHS5-014
S40PX0-CHS5-015
S40PX0-CHS5-016
S40PX0-CHS5-017
S40PX0-CHS5-018
S40PX0-CHS5-019
S40PX0-CHS5-020
S40PX0-CHS5-022
S40PX0-CHS5-024
S40PX0-CHS5-026
S40PX0-CHS5-028
S40PX0-CHS5-030
S40PX0-CHS5-032
S40PX0-CHS5-034
S40PX0-CHS5-036
S40PX0-CHS5-038
S40PX0-CHS5-040
S40PX0-CHS5-044
S40PX0-CHS5-048
S40PX0-CHS5-052
S40PX0-CHS5-056
S40PX0-CHS5-060
S40PX0-CHS5-064
S40PX0-CHS5-068
S40PX0-CHS5-072
S40PX0-CHS6-006
S40PX0-CHS6-007
S40PX0-CHS6-008
S40PX0-CHS6-009
S40PX0-CHS6-010
S40PX0-CHS6-011
S40PX0-CHS6-012
S40PX0-CHS6-013
S40PX0-CHS6-014
S40PX0-CHS6-015
S40PX0-CHS6-016
S40PX0-CHS6-017
S40PX0-CHS6-018
S40PX0-CHS6-019
S40PX0-CHS6-020
S40PX0-CHS6-022
S40PX0-CHS6-024
S40PX0-CHS6-026
S40PX0-CHS6-028
S40PX0-CHS6-030
S40PX0-CHS6-032
S40PX0-CHS6-034
S40PX0-CHS6-036
S40PX0-CHS6-038
S40PX0-CHS6-040
S40PX0-CHS6-044
S40PX0-CHS6-048
S40PX0-CHS6-052
S40PX0-CHS6-056
S40PX0-CHS6-060
S40PX0-CHS6-064
S40PX0-CHS6-068
S40PX0-CHS6-072
3
3-1/2
4
4-1/2
5
5-1/2
6
6-1/2
7
7-1/2
8
8-1/2
9
9-1/2
10
11
12
13
14
15
16
17
18
19
20
22
24
26
28
30
32
34
36
3-6
PRECISION GROUND SHAFTING

UNDERSIZE, NOMINAL AND OVERSIZE
DIAMETERS
R
Inch
MATERIAL:
303 Stainless Steel
Other lengths and diameters

T
1
2
CHAMFER
BOTH ENDS
10
3
L
D +.0000
-.0002
INCH COMPONENT
Catalog Number
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
1-0112B
1-0112
1-0112A
1-0212
1-0212A
1-0212B
1-0312
1-0312A
1-0312B
1-0312C
1-0312F
1-0312D
1-0312E
1-0424
1-0424A
1-0424B
1-0424C
1-0524
1-0524A
1-0524B
1-0624
1-0624A
1-0624B
1-0724
1-0724A
1-0724B
D
Diameter
L
Length
.0311
.0313
.0317
.0622
.0626
.0630
.0778
.0781
.0786
.0934
.0935
.0938
.0942
.1247
.1250
.1252
.1255
.1560
.1562
.1567
.1872
.1875
.1877
.2184
.2187
.2192
12
12
12
12
12
12
12
12
12
12
12
12
12
24
24
24
24
24
24
24
24
24
24
24
24
24
+.0000
-.0002
.125
in.
Catalog Number
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
1-0824
1-0836
1-0824A
1-0836A
1-0824B
1-0836B
1-1024
1-1016
1-1016A
1-1024A
1-1016B
1-1024B
1-1216
1-1236
1-1216A
1-1236A
1-1216B
1-1236B
1-1616
1-1636
1-1612A
1-1616A
1-1636A
1-1616B
1-1636B
1-2412A
D
Diameter
L
Length
.2497
.2497
.2500
.2500
.2502
.2505
.3122
.3123
.3125
.3125
.3127
.3130
.3747
.3747
.3750
.3750
.3752
.3755
.4997
.4997
.5000
.5000
.5000
.5002
.5005
.7500
24
36
24
36
24
36
24
16
16
24
16
24
16
36
16
36
16
36
16
36
12
16
36
16
36
12
+.0000
-.0002
.125
in.
5
6
7
8
9
10
11
12
13
14
15
3-7
16

UNDERSIZE DIAMETERS
MATERIAL:
Inch
303 Stainless Steel
STRAIGHTNESS:
Grooving, other modifications and

sizes available on special order.
CHAMFER
BOTH ENDS
10
INCH COMPONENT
7
8
9
10
11
12
13
14
L
Length
Catalog Number
D Diameter
.1247
D Diameter
.1872
D Diameter
.2497
.010
in.
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
1
1-1/8
1-1/4
1-3/8
1-1/2
1-5/8
1-3/4
1-7/8
2
2-1/8
2-1/4
2-3/8
2-1/2
2-5/8
2-3/4
2-7/8
3
3-1/8
3-1/4
3-3/8
3-1/2
3-5/8
3-3/4
3-7/8
4
4-1/8
4-1/4
4-3/8
4-1/2
4-5/8
4-3/4
4-7/8
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
1-04010
1-04011
1-04012
1-04013
1-04015
1-04016
1-04017
1-04018
1-04020
1-04021
1-04022
1-04023
1-04025
1-04026
1-04027
1-04028
1-04030
1-04031
1-04032
1-04033
1-04035
1-04036
1-04037
1-04038
1-04040
1-04041
1-04042
1-04043
1-04045
1-04046
1-04047
1-04048
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
1-06010
1-06011
1-06012
1-06013
1-06015
1-06016
1-06017
1-06018
1-06020
1-06021
1-06022
1-06023
1-06025
1-06026
1-06027
1-06028
1-06030
1-06031
1-06032
1-06033
1-06035
1-06036
1-06037
1-06038
1-06040
1-06041
1-06042
1-06043
1-06045
1-06046
1-06047
1-06048
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
1-08010
1-08011
1-08012
1-08013
1-08015
1-08016
1-08017
1-08018
1-08020
1-08021
1-08022
1-08023
1-08025
1-08026
1-08027
1-08028
1-08030
1-08031
1-08032
1-08033
1-08035
1-08036
1-08037
1-08038
1-08040
1-08041
1-08042
1-08043
1-08045
1-08046
1-08047
1-08048
15
16
D +.0000
-.0002
.0004 inch per inch
3-8

UNDERSIZE DIAMETERS
MATERIAL:
Inch
303 Stainless Steel
STRAIGHTNESS:
.0004 inch per inch

1
2
CHAMFER
BOTH ENDS
10
D +.0000
-.0002
INCH COMPONENT
L
Length
Catalog Number
D Diameter
.1247
D Diameter
.1872
D Diameter
.2497
.010
in.
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
5
5-1/8
5-1/4
5-3/8
5-1/2
5-5/8
5-3/4
5-7/8
6
6-1/8
6-1/4
6-3/8
6-1/2
6-5/8
6-3/4
6-7/8
7
7-1/8
7-1/4
7-3/8
7-1/2
7-5/8
7-3/4
7-7/8
8
8-1/8
8-1/4
8-3/8
8-1/2
8-5/8
8-3/4
8-7/8
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
1-04050
1-04051
1-04052
1-04053
1-04055
1-04056
1-04057
1-04058
1-04060
1-04061
1-04062
1-04063
1-04065
1-04066
1-04067
1-04068
1-04070
1-04071
1-04072
1-04073
1-04075
1-04076
1-04077
1-04078
1-04080
1-04081
1-04082
1-04083
1-04085
1-04086
1-04087
1-04088
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
1-06050
1-06051
1-06052
1-06053
1-06055
1-06056
1-06057
1-06058
1-06060
1-06061
1-06062
1-06063
1-06065
1-06066
1-06067
1-06068
1-06070
1-06071
1-06072
1-06073
1-06075
1-06076
1-06077
1-06078
1-06080
1-06081
1-06082
1-06083
1-06085
1-06086
1-06087
1-06088
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
1-08050
1-08051
1-08052
1-08053
1-08055
1-08056
1-08057
1-08058
1-08060
1-08061
1-08062
1-08063
1-08065
1-08066
1-08067
1-08068
1-08070
1-08071
1-08072
1-08073
1-08075
1-08076
1-08077
1-08078
1-08080
1-08081
1-08082
1-08083
1-08085
1-08086
1-08087
1-08088

3-9
5
6
7
8
9
10
11
12
13
14
15
16

UNDERSIZE DIAMETERS
MATERIAL:
Inch
303 Stainless Steel
STRAIGHTNESS:

CHAMFER
BOTH ENDS
10
INCH COMPONENT
7
8
9
10
11
12
13
14
L
Length
Catalog Number
D Diameter
.1247
D Diameter
.1872
D Diameter
.2497
.010
in.
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
9
9-1/8
9-1/4
9-3/8
9-1/2
9-5/8
9-3/4
9-7/8
10
10-1/8
10-1/4
10-3/8
10-1/2
10-5/8
10-3/4
10-7/8
11
11-1/8
11-1/4
11-3/8
11-1/2
11-5/8
11-3/4
11-7/8
12
12-1/8
12-1/4
12-3/8
12-1/2
12-5/8
12-3/4
12-7/8
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
1-04090
1-04091
1-04092
1-04093
1-04095
1-04096
1-04097
1-04098
1-04100
1-04101
1-04102
1-04103
1-04105
1-04106
1-04107
1-04108
1-04110
1-04111
1-04112
1-04113
1-04115
1-04116
1-04117
1-04118
1-04120
1-04121
1-04122
1-04123
1-04125
1-04126
1-04127
1-04128
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
1-06090
1-06091
1-06092
1-06093
1-06095
1-06096
1-06097
1-06098
1-06100
1-06101
1-06102
1-06103
1-06105
1-06106
1-06107
1-06108
1-06110
1-06111
1-06112
1-06113
1-06115
1-06116
1-06117
1-06118
1-06120
1-06121
1-06122
1-00123
1-06125
1-06126
1-06127
1-06128
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
1-08090
1-08091
1-08092
1-08093
1-08095
1-08096
1-08097
1-08098
1-08100
1-08101
1-08102
1-08103
1-08105
1-08106
1-08107
1-08108
1-08110
1-08111
1-08112
1-08113
1-08115
1-08116
1-08117
1-08118
1-08120
1-08121
1-08122
1-08123
1-08125
1-08126
1-08127
1-08128

15
16
D +.0000
-.0002
.0004 inch per inch
3-10

UNDERSIZE DIAMETERS
MATERIAL:
Inch
303 Stainless Steel
STRAIGHTNESS:
.0004 inch per inch

1
2
CHAMFER
BOTH ENDS
10
D +.0000
-.0002
INCH COMPONENT
L
Length
Catalog Number
D Diameter
.1247
D Diameter
.1872
D Diameter
.2497
.010
in.
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
13
13-1/8
13-1/4
13-3/8
13-1/2
13-5/8
13-3/4
13-7/8
14
14-1/8
14-1/4
14-3/8
14-1/2
14-5/8
14-3/4
14-7/8
15
15-1/8
15-1/4
15-3/8
15-1/2
15-5/8
15-3/4
15-7/8
16
16-1/8
16-1/4
16-3/8
16-1/2
16-5/8
16-3/4
16-7/8
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
1-04130
1-04131
1-04132
1-04133
1-04135
1-04136
1-04137
1-04138
1-04140
1-04141
1-04142
1-04143
1-04145
1-04146
1-04147
1-04148
1-04150
1-04151
1-04152
1-04153
1-04155
1-04156
1-04157
1-04158
1-04160
1-04161
1-04162
1-04163
1-04165
1-04166
1-04167
1-04168
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
1-06130
1-06131
1-06132
1-06133
1-06135
1-06136
1-06137
1-06138
1-06140
1-06141
1-06142
1-06143
1-06145
1-06146
1-06147
1-06148
1-06150
1-06151
1-06152
1-06153
1-06155
1-06156
1-06157
1-06158
1-06160
1-06161
1-06162
1-06163
1-06165
1-06166
1-06167
1-06168
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
1-08130
1-08131
1-08132
1-08133
1-08135
1-08136
1-08137
1-08138
1-08140
1-08141
1-08142
1-08143
1-08145
1-08146
1-08147
1-08148
1-08150
1-08151
1-08152
1-08153
1-08155
1-08156
1-08157
1-08158
1-08160
1-08161
1-08162
1-08163
1-08165
1-08166
1-08167
1-08168
3-11
5
6
7
8
9
10
11
12
13
14
15
16

UNDERSIZE DIAMETERS
MATERIAL:
Inch
303 Stainless Steel
STRAIGHTNESS:

CHAMFER
BOTH ENDS
10
INCH COMPONENT
7
8
9
10
11
12
13
L
Length
Catalog Number
D Diameter
.3122
D Diameter
.3747
D Diameter
.4997
.010
in.
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
3
3-1/2
4
4-1/2
5
5-1/2
6
6-1/2
7
7-1/2
8
8-1/2
9
9-1/2
10
12
14
16
18
20
22
24
26
28
30
32
34
36
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
14
15
16
D +.0000
-.0002
.0004 inch per inch
3-12
1-10030
1-10035
1-10040
1-10045
1-10050
1-10055
1-10060
1-10065
1-10070
1-10075
1-10080
1-10085
1-10090
1-10095
1-10100
1-10120
1-10140
1-10160
1-10180
1-10200
1-10220
1-10240
1-10260
1-10280
1-10300
1-10320
1-10340
1-10360
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
1-12030
1-12035
1-12040
1-12045
1-12050
1-12055
1-12060
1-12065
1-12070
1-12075
1-12080
1-12085
1-12090
1-12095
1-12100
1-12120
1-12140
1-12160
1-12180
1-12200
1-12220
1-12240
1-12260
1-12280
1-12300
1-12320
1-12340
1-12360
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
1-16030
1-16035
1-16040
1-16045
1-16050
1-16055
1-16060
1-16065
1-16070
1-16075
1-16080
1-16085
1-16090
1-16095
1-16100
1-16120
1-16140
1-16160
1-16180
1-16200
1-16220
1-16240
1-16260
1-16280
1-16300
1-16320
1-16340
1-16360
SHAFTS DryLin S ALUMINUM

SOLID
MATERIAL:
Inch
Aluminum 6061-T6
Hard Anodized, Rc 60
STRAIGHTNESS:
.0003 ft. / ft.
Recommended for use with:

S99GSP-..., S99GLP-... and
S99GLZ-... series linear
bearings
DryLin is a registered trademark

of the Igus Corporation.
v Length
INCH COMPONENT
CATALOG NUMBER
S40AW6
Code
012
024
036
Diameter Length
Code Code
D
Tolerance
Weight
lb. / ft.
+.0000/-.0035
+.0000/-.0043
+.0000/-.0043
+.0000/-.0051
+.0000/-.0051
+.0000/-.0063
+.0000/-.0063
+.0000/-.0075
.130
.231
.361
.519
.924
1.44
2.08
3.7
D
Diameter
Code Diameter
h11
.3750
12
.5000
16
.6250
20
.7500
24
1.0000
32
1.2500
40
1.5000
48
2.0000
64
3
NEW
4-20 RMS

upon request.
L
Length
.039
in.
12
24
36
6
7
8
9
10
11
12
13
14
15
3-13
16
SHAFTING & DRILL RODS

SHAFTING
DRAWN
SMOOTH FINISH
Inch
MATERIAL:
SAW CUT ENDS
O.D.
AISI 1215 Cold Rolled Steel
Other lengths available on special order.
L 1/8
INCH COMPONENT
Catalog Number
A
A
A
A
A
A
A
A
A
A
A
A
A
A
7C
7C
7C
7C
7C
7C
7C
7C
7C
7C
7C
7C
7C
7C
1-0506
1-0512
1-0524
1-0536
1-0606
1-0612
1-0624
1-0636
1-0806
1-0812
1-0824
1-0836
1-1006
1-1012
O.D.
.0005
L
Length
.1562
.1562
.1562
.1562
.1875
.1875
.1875
.1875
.2500
.2500
.2500
.2500
.3125
.3125
6
12
24
36
6
12
24
36
6
12
24
36
6
12
A
A
A
A
A
A
A
A
A
A
A
A
A
A
7C
7C
7C
7C
7C
7C
7C
7C
7C
7C
7C
7C
7C
7C
L
Length
O.D.
Catalog Number
in.
.0005
in.
.3125
.3125
.3750
.3750
.3750
.3750
.4375
.4375
.4375
.4375
.5000
.5000
.5000
.5000
1-1024
1-1036
1-1206
1-1212
1-1224
1-1236
1-1406
1-1412
1-1424
1-1436
1-1606
1-1612
1-1624
1-1636
24
36
6
12
24
36
6
12
24
36
6
12
24
36
2
3
4
5
6
7
DRILL RODS
PRECISION
MATERIAL:
Tool Steel - AISI 1045
FINISH:
Ground
SPECIFICATION:
10
O.D. Tolerance:
from .125 to .499 is .0005
from .500 to 1" is .001
SAW CUT ENDS
O.D.
11
Oil-hardened high-quality tool steel is suitable

for punches, dies & high-strength machined parts.
3 ft.
12
Sold in 3 ft. lengths only.
INCH COMPONENT
Catalog Number
A
A
A
A
A
A
A
7Q
7Q
7Q
7Q
7Q
7Q
7Q
1-04
1-05
1-06
1-08
1-09
1-10
1-11
O.D.
1/8
5/32
3/16
1/4
9/32
5/16
11/32
Catalog Number
A
A
A
A
A
A
A
7Q
7Q
7Q
7Q
7Q
7Q
7Q
1-12
1-14
1-16
1-20
1-24
1-28
1-32
13
O.D.
3/8
7/16
1/2
5/8
3/4
7/8
1
14
15
3-14
REV: 05.14.12 mh
16
HARDENED SHAFTS & RAIL SUPPORTS

HARDENED SHAFT SELECTION
EXAMPLE:
To order a Hardened Stainless Steel Shaft (X), with a Nominal Diameter of 3/4 (075),
in a 48" length (48) that is Predrilled (PD), the Catalog Number is S49PX0-07548PD.
Inch
INCH COMPONENT
CATALOG NUMBER
S49P
0Material
H Steel, AISI-C1060
Case Hardened to Rc 60-63
X Stainless Steel, AISI 440C
Case Hardened to Rc 50-55
Diameter
Code
Nom.
Dia.
Predrilled Shafts
050
1/2
062
5/8
075
3/4
100
1
125
1-1/4
.015
.4995 / .4990
.6245 / .6240
.7495 / .7490
.9995 / .9990
1.2495 / 1.2490
2.00
2.00
3.00
3.00
3.00
4.000
4.000
6.000
6.000
6.000
#6-32
#8-32
#10-32
1/4-20
5/16-18
050
062
075
100
125
Min. Depth of
Hardness (in.)
.2495 / .2490
.3745 / .3740
.4995 / .4990
.6245 / .6240
.7495 / .7490
.8745 / .8740
.9995 / .9990
1.2495 / 1.2490
Number of Taps per

Shaft Length
Tap Size
.015
D
Dia.
LENGTH
24
48
72
6
6
4
4
4
12
12
8
8
8
18
18
12
12
12
Steel
Stainless
Steel
.040
.040
.060
.060
.060
.060
.080
.080
.060
.060
.060
.080
.080
0.17
0.37
0.66
1.03
1.50
2.04
2.66
3.37
3
4
5
6
Weight
lb. /ft.
T
1
10-16
(To center of
Shaft)
Stainless
Steel
Plain Shafts
025
037
050
062
075
087
100
125
D
Dia.
Diameter Code
Steel
Shaft Type
Blank Plain
PD
Predrilled
Length Code (in.)
24
Diameter
48
Code
72
UNFINISHED
ENDS
10-16
LENGTH 1/16
20
RAIL SUPPORT SELECTION

MATERIAL:
Aluminum, Extruded
EXAMPLE:
To order a Rail Support with a 3/4 "Nominal Shaft Diameter (SR12)

Catalog Number is S6900Y-SR12PD.
E
B
H
H
REF.
11
12
+0
24 -1/16
Nom.
A
Model Shaft .002
Dia.
1/2
5/8
3/4
1
1-1/4
1-1/2
1-5/8
1-3/4
2-1/8
2-1/2
1/4
5/16
3/8
1/2
9/16
3/16
1/4
1/4
1/4
5/16
1
1-1/8
1-1/4
1-1/2
1-7/8
1.125
1.125
1.500
1.750
2.125
10
INCH COMPONENT
CATALOG NUMBER
S6900YPD
SR08
SR10
SR12
SR16
SR20
G*
Bolt
Hole
#6
#8
#10
1/4
5/16
.169
#6-32 x 7/8
.193
#8-32 x 7/8
.221 #10-32 x 1-1/4
.281 1/4-20 x 1-1/2
.343 5/16-18 x 1-3/4
* G hole diameter includes counterbore for socket head cap screw.

All linear dimensions are expressed in inches.
Screw
Hole
.169
.193
.221
.281
.343
Weight
per
24"
1.2
1.5
2.0
2.6
3.5
2
2
3
3
3
4
4
6
6
6
13
lb.
3-15
14
15
16
I
R
T
1
2
3
4
5
6
7
8
9
10
11
12
13
SHAFTLOC
PATENTED

HOW SHAFTLOC WORKS:
Inch
Style 1
A 7Z37- series
Double-Ended
INNER SLEEVE
OUTER SLEEVE
Style 2
A 7Z39M - series
Single-Ended
Style 1:
Style 2:
one to contract.
Style 1
Double-Ended
INNER & OUTER
SLEEVES
ASSEMBLED
SHAFT
COMPONENT
Style 2
Single-Ended
Ease of assembly
Low cost

14
15
16
DID YOU KNOW?

3-16
4 - SHAFT ACCESSORIES
R
Inch
Double-Ended Shaftloc Sleeves

pg. 4-5
Single-Ended Shaftloc Sleeves

pg. 4-6
M-Type Shaftloc
pg. 4-7
T
1
2
3
A-Type Shaftloc
pg. 4-8
Pressure Locking Hub Connectors

pg. 4-9
Locking Hub Bushings

pg. 4-10
4
5
Grip FastTM Shaft Collars

pg. 4-12
Grip Fast Shaft Collars

pg. 4-13
Fastlock Shaft Collars

pg. 4-14
6
7
8
Stroke Adjustment Shaft Collars & Rubber Bumpers

pg. 4-15
Fairloc Shaft Collars

pg. 4-16
9
10
Set Screw Collars

pg. 4-17
Heavy-Duty Set Screw Collars

pg. 4-18
Potentiometer Shaft Locks

pg. 4-18
11
12
13
Precision Shaft Extensions

pg. 4-19
Precision Set Screw Collars

pg. 4-19
Fairloc Shaft Reducers & Extenders

pg. 4-20
14
15
4-1
Shaft Reducers & Extenders
pg. 4-21
Telescoping Miniature Ball Splines

pg. 4-22
Bore Reducers
pg. 4-24
16
4 - SHAFT ACCESSORIES
R
Inch
T
1
Internal Tolerance Rings

pg. 4-26
External Tolerance Rings

pg. 4-28
Woodruff Keys
pg. 4-29
Square Machine Keys

pg. 4-29
Key Stock
pg. 4-30
Hex Stock
pg. 4-31
Square Stock
pg. 4-31
Square Hole Bushings

pg. 4-32
Hex Hole Sleeves

pg. 4-32
2
3
4
5
6
7
8
Square Hole Sleeve
pg. 4-33
9
10
11
12
13
14
15
16
4-2
SHAFTLOC
PATENTED
A SUPERIOR WAY TO FASTEN ROTATING COMPONENTS
Excelling because of its simplicity, it contains all structural features in only two parts. This new
development is the Shaftloc a patented device (United States Patent No. 5,067,846 and No.
6,000,875), manufactured and marketed by Stock Drive Products.
The usefulness of wedges and inclined
surfaces for the lifting of heavy loads has
been well-known for centuries.
Similarly, the usefulness of tapered, conical
surfaces has also been appreciated; in this
case, for their ability to produce large forces.
TRANSITION
PLATE
Inch
COMPONENT
SHAFT
An example of such an application is the use

of a tapered cylindrical split bushing (see
illustration) to fasten a rotating component
to a shaft. The axial force, which results
from tightening the bolts, is translated into
amplified radial forces that close the split
bushing.
T
1
2
3
PREVIOUS METHOD
In this way, fastening of the component to the shaft is achieved. A disadvantage of this particular method is that the
component must have a tapered bore.
A modification of this method, so that it can be used to fasten components with cylindrical bores, involves the use of a
transition plate which contains the tapered bore.
However, the Shaftloc design is the ULTIMATE in fastening methods for the following reasons:
Shaftloc has only two parts:

A slotted outer sleeve and a slotted inner sleeve, both of which have hexagonal heads. The outer sleeve is cylindrical on
its outside diameter, and threaded on its inside diameter. Conversely, the inner sleeve is threaded on its outside diameter,
and cylindrical on its inside diameter. The thread is unique in that it is not symmetrical and that it creates a continuous
inclined surface.
How Shaftloc works:

The shallow angle of the thread produces large
amplifications of forces, resulting in substantial
torque transmission capability between the
component and the shaft.
STYLE 1:
A 7Z37-series
Double-Ended
INNER SLEEVE
OUTER SLEEVE
8
9
10
STYLE 2:
A 7Z39-series
A 7Z39M-series
Single-Ended
11
12
13
STYLE 1:
DID YOU KNOW?
Double-Ended
That you can see a video showing how the Shaftloc rotating component fastener works and how it
can benefit your application. It is located at: www.sdp-si.com/shaftloc
INNER & OUTER
SLEEVES
ASSEMBLED
COMPONENT
14
15
SHAFT
4-3
STYLE 2:
Single-Ended
16
STYLE 1:
A 7Z37-series
Double-Ended
SHAFTLOC
PHONE: INNER
516.328.3300
FAX:OUTER
516.326.8827
SLEEVE
SLEEVE WWW.SDP-SI.COM
R
T
1
DISTINCT ADVANTAGES OF SHAFTLOC OVER OTHER FASTENING DEVICES:

Simplicity of design few parts
Easy repositioning or synchronizing of rotating components.
Ease of assembly
Availability in all stainless steel construction
Ability to be used for stationary breadboard
or production structures
Low-cost
Inch
2
3
4
5
Style 1: Double-Ended
When the two sleeves are threaded into each
other with a component placed between them,
tightening the sleeves will cause the outer one
to expand and the inner one to contract.

Style 2: Single-Ended
When the two sleeves are threaded into
each other and slipped into the component,
tightening the sleeves will cause the outer
STYLE 2:
A 7Z39-series1
A 7Z39M-series
Single-Ended
STYLE 1:
Double-Ended
INNER & OUTER

SLEEVES
ASSEMBLED
COMPONENT
SHAFT
STYLE 2:
Single-Ended
6
7
Style 3: Shaftloc M-Type

Two-piece construction consists of a slotted sleeve and a nut, both of hexagonal shape. Used as a locking device for rigidly
mounting mechanical components on a shaft. Tightening the nut next to the component causes the slotted sleeve to contract
by gripping the shaft and clamping the part to the sleeve at the same time.
BOTH WALLS SLOTTED

STYLE 3:
Shaftloc
M-Type
9
10
11
12
SLEEVE
NUT
Style 4: Shaftloc A-Type

Two-piece construction consists of a bolt and a nut which becomes a vibration-resistant fastener when the nut is tightened
to embrace the component mounted to it. The two-piece unit uses the wedging action between the shallow thread inclines
of the nut and bolt when the nut is tightened against the component mounted on the bolt.
13
STYLE 4:
Shaftloc
A-Type
14
BOLT
15
16
4-4
NUT
DOUBLE-ENDED SHAFTLOC SLEEVES

PATENTED
3/8 & 1/2 BORE
R
Inch
MATERIAL:
416 Stainless Steel
Double-Ended Shaftloc Sleeves

Can be used with Precision Ground Shafting,
Catalog Number A 7X 1-...
T
1
For Shaftloc introduction and use, see the

Alphabetical Index at the end of the catalog
under Technical Notes.
2
3
COMPONENT
WIDTH
W
7/32
PULLEY
BORE
5
6
H
1/4
7
INCH COMPONENT
Catalog Number
See
Note
A 7Z37-030553
A 7Z37-030578
A 7Z37-040670
1
1
2
Pulley
Bore
+.001
-.000
.625
.625
.750
B
Bore
+.001
-.000
.375
.375
.500
W
Width
H
Hex
Size
.52 .62
.75 .85
.72 .83
3/4
3/4
7/8
Max. *
Torque
Capacity
lbf in.
250
250
250
NOTES: 1. A 3/4 O.D. x 5/8 I.D. x .05 thick washer, Catalog Number A 7X 8-C20050 is supplied.
2. A 7/8 O.D. x 3/4 I.D. x .05 thick washer, Catalog Number A 7X 8-C24050 is supplied.
* Based on mating components being degreased before assembly with Shaftloc coupling.
8
9
10
11
12
13
14
15
4-5
16
I
R
T
SINGLE-ENDED SHAFTLOC SLEEVES

PATENTED
EASY ASSEMBLY
NO MARRING OF SHAFTS
Inch
MATERIAL:
416 Stainless Steel
SPECIFICATIONS:
1
2
3
4
For Shaftloc introduction and use,

see page 4-3
For optimum performance, the clearances
between the shaft, Shaftloc and housing
should not exceed .001"
Maximum torque capacity based on mating
components being degreased before assembly
Single-Ended Shaftloc Sleeves
Can be used with Precision Ground Shafting,
Catalog Number A 7X 1-...
L
E
O.D.
COMPONENT
7
8
INCH COMPONENT
Catalog Number
9
10
11
A
A
A
A
A
A
A
7Z39-0408
7Z39-0612
7Z39-0812
7Z39-0816
7Z39-1216
7Z39-1220
7Z39-1624
12
13
14
15
16
4-6
B
Bore
+.001
-.000
.125
.1875
.250
.250
.375
.375
.500
+.000
-.001
O.D.
H
Hex
Size
.250
.375
.375
.500
.500
.625
.750
3/8
1/2
1/2
5/8
5/8
3/4
7/8
1/2
21/32
21/32
13/16
13/16
15/16
15/16
.375
.500
.500
.625
.625
.750
.750
1/8
5/32
5/32
3/16
3/16
7/32
7/32
Max.
Torque
Capacity
lbf in.
15
55
100
200
250
250
250
M-TYPE SHAFTLOC
PATENTED
SELF-LOCKING
VIBRATION-RESISTANT
NONMARRING OF SHAFT
INSTALLED WITH STANDARD TOOLS
REUSABLE
R
Inch
MATERIAL:
T
1
416 Stainless Steel, Passivated
SPECIFICATIONS:
Used as a locking device for rigidly mounting

mechanical components onto a shaft.
Due to its asymmetric thread geometry,
a large radial clamping force is produced
when the nut is tightened. It is a precision,
dynamically balanced product suitable for
high-speed applications. This simple
two-piece keyless fastener can be
installed within seconds, reducing
assembly costs. Tightening the nut
causes the slotted sleeve to contract,
gripping the shaft and clamping the
part to the sleeve at the same time.
Keyways and screws are now obsolete;
can be installed on shafts with existing
keyways.
2
3
C
.040
5
A
SLEEVE
BOTH
WALLS
SLOTTED
NUT
Special sizes available upon request.
Sold in Pairs
7
INCH COMPONENT
Catalog Number
A 7Z36-0842
A 7Z36-1260
A 7Z36-1671
A
Dia.
+.001
-.000
.250
.375
.500
B
Dia.
+.000
-.001
.3125
.500
.625
8
C
.50
.75
.94
.15
.15
.20
.27
.45
.56
.42
.60
.71
Diameters A and B concentric within .0005 T.I.R.
9
10
11
12
13
A superior method for building mounting shafts, frames,

pins, rails or any cylindrical
components to thin sheet
metal or plastic walls.
Ideal in slots or oversized

holes used for shaft
position or belt tension
adjustment applications.
Mounts hubless gears, sprockets, pulleys, cams or any thin

walled components onto a shaft. Offers infinite radial and
axial adjustments and quick lock and release action.
14
15
4-7
16
I
R
T
A-TYPE SHAFTLOC
PATENTED
SELF-LOCKING
VIBRATION-RESISTANT
INSTALLED WITH STANDARD TOOLS
REUSABLE
Inch
MATERIAL:
416 Stainless Steel, Passivated
L
B
2
3
SPECIFICATIONS:
4
5
BOLT
These vibration-resistant fasteners employ

asymmetric threads to self-lock. The two-piece
unit uses the wedging action between the shallow
thread inclines of the nut and bolt for self-locking
when the nut encounters resistance.
The nut turns freely until it contacts parts being
clamped together and additional turns wedge
them into a locked and vibration-resistant condition.
NUT
CLAMPED PARTS
7
NUT
8
9
10
11
12
13
14
15
16
BOLT
PATENTED
THREAD
Special sizes available upon

A request.
Sold in Pairs
INCH COMPONENT
Catalog Number
A
A
A
A
A
A
A
A
A
A
A
A
7Z38-0812
7Z38-0816
7Z38-0820
7Z38-1012
7Z38-1016
7Z38-1020
7Z38-1216
7Z38-1220
7Z38-1224
7Z38-1620
7Z38-1624
7Z38-1628
4-8
A
Dia.
+.000
-.002
.250
.250
.250
.3125
.3125
.3125
.375
.375
.375
.500
.500
.500
.75
1.00
1.25
.75
1.00
1.25
1.00
1.25
1.50
1.25
1.50
1.75
.75
.75
.75
.75
.75
.75
1.00
1.00
1.00
1.25
1.25
1.25
.16
.16
.16
.20
.20
.20
.29
.29
.29
.32
.32
.32
.44
.44
.44
.50
.50
.50
.56
.56
.56
.75
.75
.75
.23
.23
.23
.27
.27
.27
.34
.34
.34
.45
.45
.45
PRESSURE LOCKING HUB CONNECTORS

NO WEAR OR STRESS ON COMPONENT
EASY TO USE
SPACE SAVER
R
Inch
MATERIAL:
Hardened Steel
-22F to +180F
FEATURES:
Fast and frequent mounting / dismantling with only

one set screw.
Radial screw positioning saves space along the shaft.
Accurate positioning. No axial movement when mounted.
Uniform surface pressure against shaft and hub prevents
damage to surfaces and enables the use of small diameter hubs.
2
3
SPECIFICATIONS:
PRESSURE SCREW
These connectors are designed for fast and accurate

repositioning of the hub. It has just one screw for
pressurizing in radial position. No space is used along
the shaft for mounting tools. They are made up of a
double-walled sleeve and flange filled with a pressure
medium. Pressure screw must not be tightened
when not mounted or else force may deform
the unit.
d D
5
L1
CONNECTOR TOLERANCES
O.D.
Shaft O.D. Tolerance:

.625 +.0000/-.0007
.750-1.000 +.0000/-.0013
1.250-1.500 +.0000/-.0015
Hub Bore Tolerance:

.748- .901 +.0008/-.0000
1.220-1.811 +.0010/-.0000
NOTE: Shaft and Hub as provided and used by customer.
OPERATION:
When the pressure screw is tightened to the recommended

tightening torque, the double-walled sleeve expands uniformly
against shaft and hub and creates a rigid joint. Dismantling is
done by loosening the screw which returns the connector to its
original dimensions. It can then easily be dismantled.
10
11
INCH COMPONENT
Catalog Number
d
Nom.
I.D.
D
Dia.
O.D.
L
Length
L1
OAL
S21BPY-625185157
S21BPY-750199165
S21BPY-A00232193
S21BPY-A25269220
S21BPY-A50333283
.625
.750
1.000
1.250
1.500
.748
.906
1.220
1.535
1.811
1.850
1.988
2.323
2.697
3.327
1.02
1.10
1.38
1.65
2.04
1.57
1.65
1.93
2.20
2.83
T
Torque
lbf ft.
Screw
Tightening
Torque
lbf ft.
3.6
3.6
3.6
3.6
15.5
39
63
140
317
656
12
13
14
15
4-9
16
I
R
T
LOCKING HUB BUSHINGS

FITS COMPONENTS WITH LIMITED HUB O.D.
ELIMINATES KEYS OR SPLINES
IMPROVES FIT CONCENTRICITY
DEFINED AXIAL HUB POSITION
EASY AXIAL OR ANGULAR TIMING
Inch
MATERIAL:
1
2
Inner Body - Steel

Outer Sleeve - Steel
Socket Head Screws - Alloy Steel, Black Oxide Finish
SPECIFICATION:
* Tolerance of shaft diameter and mating
mounted component bore is .0010.
L
L1
B
L2
O.D.
6
7
8
9
10
11
PUSH-OFF SCREW THREADS
INCH COMPONENT
Catalog Number
B*
Bore
D*
Dia.
O.D.
L2
L1
S21HSC-250094650
S21HSC-313106650
S21HSC-375106650
S21HSC-500119650
S21HSC-625131807
S21HSC-750144807
S21HSC-875175984
S21HSC-A00188984
.2500
.3125
.3750
.5000
.6250
.7500
.8750
1.0000
.8125
.8750
.9375
1.0625
1.1875
1.3125
1.5625
1.6875
.938
1.000
1.063
1.188
1.313
1.438
1.750
1.875
.394
.394
.394
.394
.472
.472
.591
.591
.516
.516
.516
.516
.594
.594
.754
.754
.650
.650
.650
.650
.807
.807
.984
.984
12
13
14
15
16
4-10
Locking
Screw
Size
Qty
M4
M4
M4
M4
M4
M4
M5
M5
3
3
3
4
6
6
6
8
Screw
Max.
Tightening Torque
Torque
lbf in.
36.1
42.5
42.5
42.5
42.5
42.5
87
87
lbf in.
167
246
295
524
983
1179
2664
3449
GRIP FAST TM SHAFT COLLARS

R
Inch
HOW THE GRIP FAST
TM
IS USED:
1.
Simply slide Grip Fast TM
onto the shaft to the correct
location.
2.
3.
It will automatically lock

into position.
To release, simply push Grip

FastTM slightly forward. Then
squeeze between the end ring
and outer body gap (to cause
the gap become wider). Then
slide Grip FastTM off.
2
3
4
HOW THE DEVICE WORKS:

There are six basic components. The inner mechanism is comprised of three steel balls, one retention ring
with a tapering inner diameter, and one spring. The ABS composite housing consists of one inner body, an
outer sleeve, and an end release ring.
The inner body is drilled to accommodate the three balls so that they emerge through its inner diameter. They rest against the tapered retention ring. This causes the ball bearings to squeeze down on the
cylindrical shaft with the same size OD as the inner body's bore, jamming the ball bearing between the
shaft and the retention ring. This locks the Grip Fast TM (and any object it is set up against) in the opposite
direction.
5
6
7
An undercut between the retention ring and outer sleeve gives the ring more flexibility, which under
unsymmetrical loading causes more uniform distribution of the forces in the balls. The housing parts hold
all of this together and are spring-loaded.
To release the Grip FastTM, the inner body is pulled back through the inside of the outer sleeve, pulling the
ball bearings out of the gap between the inner body and shaft, and releasing the collar's hold on the shaft.
The spring forces the inner body back to the closed position. The distance that exists between the end
release ring and the outer sleeve is designed to allow one-handed release.
INNER BODY
SPRING
10
11
OUTER SLEEVE
BALLS
12
13
RETENTION RING
UNDERCUT
14
END RELEASE RING
15
4-11
16
GRIP FAST TM SHAFT COLLARS

U.S. PATENT #4893810
SELF-LOCKING
ABSORBS VIBRATION AND SHOCK
NO TOOLS NEEDED
EASY MOUNTING
QUICK RELEASE
R
Inch
MATERIAL:
T
1
303 Stainless Steel
LOAD CAPACITY:
600 lbf
Call for availability of other sizes.
3
4
F
E
C
5
B
6
7
Shown with shaft in place (not supplied)
INCH COMPONENT
Catalog Number *
A
A
A
A
A
A
A
A
A
A
A
A
7X34-0250
7X34-0312
7X34-0375
7X34-0625
7X34-0750
7X34-0875
7X34-1250
7X34-1375
7X34-1500
7X34-2000
7X34-2500
7X34-3000
8
A
O.D.
B
Shaft
Dia.
C
Ball
Dia.
D
Sleeve
Length
F
Overall
Length
.740
.740
1.115
1.400
1.400
1.865
2.200
2.200
2.200
2.720
3.312
3.775
.2500
.3125
.3750
.6250
.7500
.8750
1.2500
1.3750
1.5000
2.0000
2.5000
3.0000
.0938
.0625
.1875
.1875
.1250
.2500
.2500
.1875
.1250
.1563
.1875
.1875
.638
.638
.802
1.000
1.000
1.325
1.335
1.335
1.335
1.335
1.235
1.600
.900
.900
1.000
1.310
1.310
1.805
1.610
1.610
1.610
1.875
1.362
1.800
1.000
1.000
1.100
1.500
1.500
2.000
2.005
2.005
2.005
2.005
1.562
2.000
9
10
11
12
13
REV: 02.09.2012 JC
14
15
4-12
16
GRIP FAST SHAFT COLLARS LOW COST

U.S. PATENT #4893810
SELF-LOCKING
ABSORBS VIBRATION AND SHOCK
NO TOOLS NEEDED
EASY MOUNTING
QUICK RELEASE
R
Inch
MATERIAL:
T
1
Inner Body - ABS Plastic

Outer Sleeve - ABS Plastic
Retention Ring - Steel
Balls and Springs - Steel
LOAD CAPACITY:
600 lbf
Call for availability of other sizes.

G
F
D
SHAFT
B C
6
Shown with shaft in place (not supplied)
INCH COMPONENT
Catalog Number *
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
7Z34-0125SC
7Z34-0187SC
7Z34-0250SC
7Z34-0312SC
7Z34-0375SC
7Z34-0500SC
7Z34-0625SC
7Z34-0875SC
7Z34-1000SC
7Z34-1250SC
7Z34-1375SC
7Z34-1500SC
7Z34-1750SC
7Z34-2000SC
7Z34-2500SC
7Z34-3000SC
A
Outer
Sleeve
O.D.
.558
.558
.743
.743
1.107
1.107
1.400
1.860
1.860
2.165
2.165
2.165
2.725
2.725
3.345
3.775
B
Shaft
Dia.
C
Cap
O.D.
D
Ball
Dia.
E
Sleeve
Length
G
Overall
Length
.125
.1875
.250
.3125
.375
.500
.625
.875
1.000
1.250
1.375
1.500
1.750
2.000
2.500
3.000
.608
.608
.784
.784
1.150
1.150
1.420
1.910
1.910
2.145
2.145
2.145
2.955
2.955
3.312
3.775
.094
.063
.094
.063
.187
.125
.187
.297
.234
.250
.187
.125
.281
.156
.187
.187
.638
.638
.638
.638
.800
.800
1.000
1.325
1.325
1.340
1.340
1.340
1.335
1.335
1.240
1.600
.840
.840
1.000
1.000
.905
.905
1.305
1.800
1.800
1.735
1.735
1.735
1.875
1.875
1.450
1.865
.940
.940
1.010
1.010
1.045
1.045
1.460
2.005
2.005
1.825
1.825
1.825
2.065
2.065
1.570
1.980
8
9
10
11
12
13
REV: 02.09.2012 JC
14
15
4-13
16
I
R
FASTLOCK SHAFT COLLARS

NO TOOLS NEEDED
USABLE FOR NONHARDENED SHAFTS
Inch
MATERIAL:
Inner Body - 303 Stainless Steel

Outer Sleeve - 303 Stainless Steel
Balls - 440C Stainless Steel
Spring - 302 Stainless Steel
1
C
2
3
4
RELEASE
RING
5
6
LOCKING
BODY
7
8
To release, hold body and pull

release ring. This makes the gap
between the body and ring larger
allowing the Fastlock to Slide off
easliy.
Locking collar
holds position.
Slide locking collar onto

shaft to correct position
9
INCH COMPONENT
10
11
12
13
14
Catalog Number
A
Dia.
S25FLY-0250
S25FLY-0313
S25FLY-0375
S25FLY-0500
S25FLY-0625
S25FLY-0750
S25FLY-0875
S25FLY-1000
S25FLY-1250
S25FLY-1500
S25FLY-1625
S25FLY-1750
S25FLY-2000
.73
.73
.85
1.10
1.10
1.23
1.45
1.45
2.23
2.23
2.35
2.72
2.95
15
16
4-14
B
Shaft Dia.
+.001
-.015
.250
.3125
.375
.500
.625
.750
.875
1.000
1.250
1.500
1.625
1.750
2.000
C
Overall
Length
1.00
1.00
1.78
1.78
1.78
1.78
1.78
1.78
1.87
1.87
1.87
1.87
1.87
Weight
lb.
.07
.07
.18
.29
.23
.28
.41
.32
1.12
.87
.91
1.42
1.54
STROKE ADJUST. SHAFT COLLARS & RUBBER BUMPERS

SHAFT COLLARS
EASY AND PRECISE STROKE ADJUSTMENT

UP TO .44 in. FINE STROKE ADJUSTMENT
Inch
MATERIAL:
Stainless Steel or Carbon Steel, Black Oxide

SCREW 1
2 EA.
MIN.
WIDTH
INCH COMPONENT
Catalog Number
Stainless
Steel
S21SAC-025063
S21SAC-038088
S21SAC-050113
S21SAC-063131
S21SAC-075150
S21SAC-100175
S21SAC-125206
S21SAC-138225
S21SAC-150238
Carbon Steel,
Black Oxide
S21SAC-025063S
S21SAC-038088S
S21SAC-050113S
S21SAC-063131S
S21SAC-075150S
S21SAC-100175S
S21SAC-125206S
S21SAC-138225S
S21SAC-150238S
O.D.
5/8
7/8
1-1/8
1-5/16
1-1/2
1-3/4
2-1/16
2-1/4
2-3/8
B
Bore
+.001
-.000
.250
.375
.500
.625
.750
1.000
1.250
1.375
1.500
Min.
Width
Max.*
Travel
Screw
1
15/32
15/32
3/4
3/4
7/8
7/8
1
1
1
.19
.16
.32
.32
.38
.38
.44
.44
.44
#4-40
#6-32
#8-32
#8-32
#10-32
#10-32
1/4-20
1/4-20
1/4-20
1
2
O.D.
SCREW 2
MAX. TRAVEL
KNURLED
NUT
Max. Axial
Screw Load Capacity lbf
2
Stainless
#2-56
#2-56
#5-40
#6-32
#6-32
#8-32
#8-32
#8-32
#8-32
Steel
Steel
390
460
690
570
1200
730
2450
2640
2840
790
660
1310
1210
3600
3450
3260
3220
3180
* Max. Width = Min. Width + Max. Travel
RUBBER BUMPERS
5
6
7
8
SHOCK ABSORBER FOR COMPRESSION LOADS

OIL- AND CHEMICAL-RESISTANT
MATERIAL:
Buna N70 Durometer

.125
10
-20F to +250F
I.D.
O.D.
INCH COMPONENT
11
12
Catalog Number
I.D.
O.D.
S79RUB-025063
S79RUB-038088
S79RUB-050113
S79RUB-063131
S79RUB-075150
S79RUB-100175
S79RUB-125206
S79RUB-138225
S79RUB-150238
.25
.38
.50
.63
.75
1.00
1.25
1.38
1.50
.63
.88
1.13
1.31
1.50
1.75
2.06
2.25
2.38
13
14
15
4-15
16
FAIRLOC SHAFT COLLARS

WITH INTEGRAL BEARING SHIM SPACER
R
T
1
MATERIAL:
Inch
Brass, Black Oxide Finish

303 Stainless Steel
FEATURES:
No shim spacers required.

Used to preload bearing.
Fairloc eliminates marred shafts.
More holding strength than set screw collars.
2
3
4
SOCKET HEAD
CAP SCREW
SUPPLIED
5
6
C B
O.D.
7
L
8
INCH COMPONENT
9
10
11
12
Catalog Number
Brass
Black Oxide
S25FB9-PC12015
S25FB9-PC12515
S25FB9-PC18715
S25FB9-PC25021
S25FB9-PC31227
S25FB9-PC37527
S25FB9-PC50031
S25FB9-PC62537
S25FB9-PC75047
13
14
15
16
4-16
303 Stainless
Steel
S25FY9-PC12015
S25FY9-PC12515
S25FY9-PC18715
S25FY9-PC25021
S25FY9-PC31227
S25FY9-PC37527
S25FY9-PC50031
S25FY9-PC62537
S25FY9-PC75047
Shaft
Size
O.D.
.12
1/8
3/16
1/4
5/16
3/8
1/2
5/8
3/4
.433
.433
.495
.630
.870
.870
0.984
1.181
1.496
B
Bore
+.0010
-.0000
.1200
.1250
.1875
.2500
.3125
.3750
.5000
.6250
.7500
C
Dia.
Screw
Size
.189
.189
.250
.315
.394
.438
.578
.750
.866
.020
.020
.020
.020
.020
.020
.020
.030
.030
.276
.276
.276
.354
.433
.433
.433
.551
.630
#2-56
#2-56
#2-56
#4-40
#6-32
#6-32
#6-32
#8-32
#10-32
SET SCREW COLLARS

WITH INTEGRAL BEARING SHIM SPACER
MATERIAL:
Inch
303 Stainless Steel
FEATURES:
1
Precision
Component
No shim spacers required.

Used to preload bearing.
T
1
2
3
4
L
L/2
SET SCREW
SUPPLIED
NO SPACERS
REQUIRED
SPOT
DRILL
O.D.
1/32
CHAMFER
1/64
8
INCH COMPONENT
Catalog Number
Shaft
Size
O.D.
S25CY9-PC0608
S25CY9-PC0810
S25CY9-PC1010
S25CY9-PC1212
S25CY9-PC1516
S25CY9-PC1616
S25CY9-PC2016
S25CY9-PC2424
S25CY9-PC3232
S25CY9-PC4040
S25CY9-PC4848
S25CY9-PC6464
S25CY9-PC8072
3/32
1/8
5/32
3/16
.2405
1/4
5/16
3/8
1/2
5/8
3/4
1
1-1/4
1/4
5/16
5/16
3/8
1/2
1/2
1/2
3/4
1
1-1/4
1-1/2
2
2-1/4
B
Bore
+.0005
-.0000
.0935
.1248
.1560
.1873
.2405
.2498
.3123
.3748
.4998
.6248
.7498
.9998
1.2498
Set
Screw
Spot
Drill
.120
.180
.180
.220
.250
.250
.250
.375
.437
.500
.562
.625
.750
#0-80
#2-56
#2-56
#4-40
#6-32
#6-32
#6-32
#10-24
1/4-20
1/4-20
3/8-16
3/8-16
3/8-16
#78 (.016)
#69 (.028)
#69 (.028)
#60 (.040)
#50 (.070)
#50 (.070)
#50 (.070)
#31 (.120)
#25 (.149)
#25 (.149)
#22 (.157)
#22 (.157)
#22 (.157)
9
10
11
12
13
14
15
4-17
16
SET SCREW COLLARS & SHAFT LOCKS

SET SCREW COLLARS
HEAVY-DUTY
MATERIAL:

303 Stainless Steel, Clear Passivated
Inch
SET SCREW
T
1
O.D.
2
3
INCH COMPONENT
Catalog Number
Carbon Steel
A
A
A
A
A
A
A
A
A
A
A
Stainless Steel
7C 2-11204A
7C 2-11406
7C 2-11608
7C 2-12010
7C 2-12412
7C 2-12814
7C 2-13216
7C 2-13218
7C 2-13620
7C 2-14022
7C 2-14024
A
A
A
A
A
7X
7X
7X
7X
7X
A
A
A
A
A
A
A
A
7X
7X
7X
7X
7X
7X
7X
7X
2-10802
2-11203
2-11204A
2-11406
2-11608
2-12010A
2-12412
2-12814
2-13216
2-13218
2-13620
2-14022
2-14024
O.D.
B
Bore
.250
.375
.375
.4375
.500
.625
.625
.750
.875
1.000
1.000
1.125
1.250
1.250
.0625
.0938
.125
.1875
.250
.3125
.3125
.375
.4375
.500
.5625
.625
.6875
.750
+.003
-.000
W
Width
Set
Screw
.188
.188
.250
.250
.3125
.3125
.3125
.375
.4375
.4375
.4375
.500
.5625
.5625
#2-56
#4-40
#6-32
#8-32
#10-32
#10-32
#10-32
1/4-20
1/4-20
1/4-20
1/4-20
5/16-18
5/16-18
5/16-18
4
5
6
7
8
9
POTENTIOMETER SHAFT LOCKS

NUT TYPE
SPLIT HUB
10
MATERIAL:
Brass
FINISH:
Bright Alloy
Fig. 1
INCH COMPONENT
Fig. 2
C
Thread
D
Hex.
E
Hex.
A 9B42-B132
A 9B42-B332
.127
.252
7/16
1/2
1/4-32
3/8-32
3/8
1/2
3/8
7/16
A 9B42-C132
.127
17/32
1/4-32
3/8
3/8
Fig. 1
Fig. 2
4-18
REV: 05.22.12 mh
12
13
A
Dia.
Catalog Number
11
14
15
16
SHAFT EXTENSIONS & SET SCREW COLLARS

PRECISION SHAFT EXTENSIONS
MATERIAL:
303 Stainless Steel
Inch
1
Precision
Component
1-5/8
1/2
D
1
INCH COMPONENT
Catalog Number
S5200Y-125125
S5200Y-187187
S5200Y-250250
S5200Y-125187
S5200Y-125250
S5200Y-187250
S5200Y-187125
S5200Y-250125
S5200Y-250375
S5200Y-375250
S5200Y-375375
1/4
A
Dia.
Shaft Size
Male
Female
1/8
3/16
1/4
1/8
1/8
3/16
3/16
1/4
1/4
3/8
3/8
1/8
3/16
1/4
3/16
1/4
1/4
1/8
1/8
3/8
1/4
3/8
B
Dia.
+.0000
-.0002
.1247
.1872
.2497
.1247
.1247
.1872
.1872
.2497
.2497
.3747
.3747
+.0005
-.0000
.1248
.1873
.2498
.1873
.2498
.2498
.1248
.1248
.3748
.2498
.3748
3
C
Dia.
D
Dia.
.188
.250
.312
.250
.312
.312
.188
.188
.437
.312
.437
.250
.312
.375
.312
.375
.375
.250
.250
.500
.375
.500
* Diameters concentric to within .005 T.I.R.
4
5
6
7
8
PRECISION SET SCREW COLLARS

MATERIAL:
303 Stainless Steel
Other materials, sizes and passivation

SPOT DRILL
B
O.D.
L/2
SOCKET HEAD
SET SCREW SUPPLIED
10
1/32 x 45 CHAMFER
11
INCH COMPONENT
Catalog Number
Shaft
Size
O.D.
S5000Y-07807
S5000Y-09408
S5000Y-12010
S5000Y-12510
S5000Y-15610
S5000Y-18712
S5000Y-24116
S5000Y-25016
S5000Y-31218
S5000Y-37524
S5000Y-50032
5/64
3/32
.12
1/8
5/32
3/16
.24
1/4
5/16
3/8
1/2
7/32
1/4
5/16
5/16
5/16
3/8
1/2
1/2
9/16
3/4
1
B
Bore
+.0005
-.0000
.0779
.0935
.1200
.1248
.1560
.1873
.2405
.2498
.3123
.3748
.4998
Screw
Size
Spot
Drill
.12
.12
.18
.18
.18
.22
.25
.25
.28
.37
.50
#0-80
#0-80
#2-56
#2-56
#2-56
#4-40
#6-32
#6-32
#6-32
#10-32
1/4-20
#78
#78
#69
#69
#69
#60
#50
#50
#50
#31
#25
4-19
12
13
14
15
16
FAIRLOC SHAFT REDUCERS & EXTENDERS

MATERIAL:
R
T
303 Stainless Steel

Fairloc hubs require
controlled shaft tolerances.
Suggested clearance fit between
the bore and shaft is .0001/.0008.
Inch
1
Precision
Component
1
2
1.00
SOCKET HEAD
CAP SCREW
SUPPLIED
3
C
B O.D.
5
6
INCH COMPONENT
Catalog Number
7
8
9
10
11
12
S52FCY-120125
S52FCY-120187
S52FCY-125125
S52FCY-125187
S52FCY-125250
S52FCY-187125
S52FCY-187187
S52FCY-187250
S52FCY-241187
S52FCY-241250
S52FCY-241375
S52FCY-250125
S52FCY-250187
S52FCY-250250
S52FCY-250375
S52FCY-375250
S52FCY-375375
S52FCY-375500
S52FCY-500375
S52FCY-500500
13
14
15
16
4-20
Shaft Size
Female Male
.120
.120
1/8
1/8
1/8
3/16
3/16
3/16
.2405
.2405
.2405
1/4
1/4
1/4
1/4
3/8
3/8
3/8
1/2
1/2
1/8
3/16
1/8
3/16
1/4
1/8
3/16
1/4
3/16
1/4
3/8
1/8
3/16
1/4
3/8
1/4
3/8
1/2
3/8
1/2
O.D.
.437
.437
.437
.437
.437
.437
.437
.437
.530
.530
.530
.530
.530
.530
.530
.870
.870
.870
1.000
1.000
B
Bore
+.0005
-.0000
.1200
.1200
.1248
.1248
.1248
.1873
.1873
.1873
.2405
.2405
.2405
.2498
.2498
.2498
.2498
.3748
.3748
.3748
.4998
.4998
C
Dia.
+.0000
-.0002
.1247
.1872
.1247
.1872
.2497
.1247
.1872
.2497
.1872
.2497
.3747
.1247
.1872
.2497
.3747
.2497
.3747
.4997
.3747
.4997
.375
.375
.375
.375
.325
.375
.375
.325
.375
.375
.375
.375
.375
.375
.375
.563
.563
.563
.750
.750
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
3/4
3/4
3/4
1
1
Cap
Screw Screw
Size Clear.
Radius
#2-56
#2-56
#2-56
#2-56
#2-56
#2-56
#2-56
#2-56
#2-56
#2-56
#2-56
#2-56
#2-56
#2-56
#2-56
#6-32
#6-32
#6-32
#6-32
#6-32
.273
.273
.273
.273
.273
.273
.273
.273
.315
.315
.315
.315
.315
.315
.315
.495
.495
.495
.552
.552
SHAFT REDUCERS & EXTENDERS

MATERIAL:
Other bore sizes

Inch
#6-32 x 1/8 STAINLESS STEEL

SET SCREW SUPPLIED
1/2
3/16
C +.002
-.000
O.D.
B +.002
-.000
INCH COMPONENT
Catalog Number
O.D.
B
Bore
C
Dia.
A 7X 3-0808A
A 7X 3-0808B
A 7X 3-0808C
A 7X 3-0808D
A 7X 3-0810A
A 7X 3-0810B
A 7X 3-0810C
A 7X 3-0810D
A 7X 3-0812A
A 7X 3-0812B
A 7X 3-0812C
A 7X 3-0812D
A 7X 3-0814A
A 7X 3-0814B
A 7X 3-0814C
A 7X 3-0814D
A 7X 3-0816A
A 7X 3-0816B
A 7X 3-0816C
A 7X 3-0816D
A 7X 3-1208A
A 7X 3-1208B
A 7X 3-1208C
A 7X 3-1208D
A 7X 3-1210A
A 7X 3-1210B
A 7X 3-1210C
A 7X 3-1210D
A 7X 3-1212A
A 7X 3-1212B
A 7X 3-1212C
A 7X 3-1212D
A 7X 3-1214A
A 7X 3-1214B
A 7X 3-1214C
A 7X 3-1214D
A 7X 3-1216A
A 7X 3-1216B
A 7X 3-1216C
A 7X 3-1216D
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
9/16
9/16
9/16
9/16
9/16
9/16
9/16
9/16
9/16
9/16
9/16
9/16
9/16
9/16
9/16
9/16
9/16
9/16
9/16
9/16
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
1/4
1/4
1/4
1/4
5/16
5/16
5/16
5/16
3/8
3/8
3/8
3/8
7/16
7/16
7/16
7/16
1/2
1/2
1/2
1/2
1/4
1/4
1/4
1/4
5/16
5/16
5/16
5/16
3/8
3/8
3/8
3/8
7/16
7/16
7/16
7/16
1/2
1/2
1/2
1/2
7/16
7/16
3/8
3/8
7/16
7/16
3/8
3/8
7/16
7/16
3/8
3/8
7/16
7/16
3/8
3/8
7/16
7/16
3/8
3/8
7/16
7/16
3/8
3/8
7/16
7/16
3/8
3/8
7/16
7/16
3/8
3/8
7/16
7/16
3/8
3/8
7/16
7/16
3/8
3/8
5/8
1-1/4
5/8
1-1/4
5/8
1-1/4
5/8
1-1/4
5/8
1-1/4
5/8
1-1/4
5/8
1-1/4
5/8
1-1/4
5/8
1-1/4
5/8
1-1/4
5/8
1-1/4
5/8
1-1/4
5/8
1-1/4
5/8
1-1/4
5/8
1-1/4
5/8
1-1/4
5/8
1-1/4
5/8
1-1/4
5/8
1-1/4
5/8
1-1/4
1-1/8
1-3/4
1-1/8
1-3/4
1-1/8
1-3/4
1-1/8
1-3/4
1-1/8
1-3/4
1-1/8
1-3/4
1-1/8
1-3/4
1-1/8
1-3/4
1-1/8
1-3/4
1-1/8
1-3/4
1-1/8
1-3/4
1-1/8
1-3/4
1-1/8
1-3/4
1-1/8
1-3/4
1-1/8
1-3/4
1-1/8
1-3/4
1-1/8
1-3/4
1-1/8
1-3/4
1-1/8
1-3/4
1-1/8
1-3/4
4-21
REV: 05.22.12 mh
5
6
7
8
9
10
11
12
13
14
15
16
I
R
T
1
TELESCOPING MINIATURE BALL SPLINES

ZERO BACKLASH
LOW INERTIA
ACCOMMODATES 1/4" AXIAL MOTION
Inch
MATERIAL:
Body & Shaft - 303 Stainless Steel

Balls - 440 Stainless Steel
1
Precision
Component
MAXIMUM OPERATING SPEED:

10000 rpm
FEATURES:
2
3
Zero Backlash is attained with patented design and

close dimensional control of components.
Use where axial motion is present while transmitting
rotary motion.
Will not accommodate angular misalignment.
*L (CLOSED)
C
LUBRICATION:
4
5
1/4*
D
Dry Film Plus Oil Suspension
These splines may be mated to S57PY5-...

and S57PY4-... series of universal joints to
make telescoping universal joints.
O.D. B
C/2
6
7
8
9
10
11
12
13
INCH COMPONENT
Catalog Number
O.D.
B
Bore
+.001
-.000
C
Bore
Depth
D
Shoulder
Length
+.000
-.001
S59PY5-TBS0309
S59PY5-TBS0409
S59PY5-TBS0612
S59PY5-TBS0816
9/32
9/32
3/8
1/2
.0938
.125
.1875
.250
1/4
1/4
5/16
3/8
1/4
1/4
5/16
3/8
.0938
.125
.1875
.250
* Closed dimensions for standard 1/4" of travel (min.).

Up to 4" of travel available on special order.
14
15
16
4-22
E
Dia.
L*
Closed
Set
Screw
Size
1-1/16
1-1/16
1-1/4
1-1/2
#2-56
#2-56
#4-40
#6-32
Torque
ozf in.
16
16
64
256
See additional items on the next page
TELESCOPING MINIATURE BALL SPLINES

ZERO BACKLASH
LOW INERTIA
R
Inch
MATERIAL:
Body & Shaft - 440 Stainless Steel

1
Precision
Component
MAXIMUM OPERATING SPEED:
T
1
8000 rpm
FEATURES:
Zero Backlash is attained with patented design and

close dimensional control of components.
Use where axial motion is present while transmitting
rotary motion.
Will not accommodate angular misalignment.
2
*L (CLOSED)
D
LUBRICATION:
1/4*
.365
.360
Dry Film Plus Oil Suspension
These splines may be mated to

S57PY5-... and S57PY4-... series of
universal joints to make telescoping
universal joints.
O.D. B
E
C/2
Fig. 1
*L (CLOSED)
1/4*
W/2
W
O.D. B
E
W/2
C/2
Fig. 2
10
INCH COMPONENT
Catalog Number
Fig. 1
S59PQ5-TBS1232
Fig. 2
S59PQ5-TBS2048
S59PQ5-TBS3264
W
K
E
C
D
Set Torque Keyway Keyway
L * Screw
Dia.
Bore Shoulder +.000
Closed Size oz f in. Length Width
Depth Length
-.001
(min.) +.0015
-.0000
O.D.
B
Bore
.375
1/2
1/2
.375
2-1/8
1/4-20
1200
1-1/2
2
.625
1.000
3/4
1-1/4
3/4
1-1/4
.625
1.000
3
4-1/4
5/16-18
3/8-16
4800
9600
1/2
3/4
.1875
.2500
+.001
-.000
* Closed dimensions for standard 1/4" of travel (min.).

Up to 4" of travel available on special order.
See additional items on the previous page
11
12
13
14
15
4-23
16
BORE REDUCERS
INCH TO INCH REDUCTION
MATERIAL:
Inch
Aluminum
T
1
2
INSTALLATION RECOMMENDATIONS:
S = set screw positions in hub

C = for single set screw fastening
T = for tangential screw in clamp hub
SPECIFICATIONS:
Bore reducers with thicker walls may have a slot

extending into opposite wall for additional flexibility.
O.D. and I.D. tolerances are maintained before slitting.
L
S
45
I.D.
O.D.
5
6
INCH COMPONENT
Catalog Number
7
8
9
10
11
12
13
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
7A30-251203
7A30-251204
7A30-251205
7A30-251803
7A30-251804
7A30-251805
7A30-311803
7A30-311804
7A30-311805
7A30-311806
7A30-311807
7A30-312503
7A30-312504
7A30-312505
7A30-312506
7A30-312507
7A30-372504
7A30-372505
7A30-372506
7A30-372507
7A30-372508
7A30-373104
7A30-373105
7A30-373106
14
15
16
4-24
O.D.
I.D.
.2500
.2500
.2500
.2500
.2500
.2500
.3125
.3125
.3125
.3125
.3125
.3125
.3125
.3125
.3125
.3125
.3750
.3750
.3750
.3750
.3750
.3750
.3750
.3750
.1250
.1250
.1250
.1875
.1875
.1875
.1875
.1875
.1875
.1875
.1875
.2500
.2500
.2500
.2500
.2500
.2500
.2500
.2500
.2500
.2500
.3125
.3125
.3125
.025
.025
.025
.025
.025
.025
.025
.025
.025
.025
+.0005 +.001 Groove

-.0010 -.000 Depth
L
3/8
1/2
5/8
3/8
1/2
5/8
3/8
1/2
5/8
3/4
7/8
3/8
1/2
5/8
3/4
7/8
1/2
5/8
3/4
7/8
1
1/2
5/8
3/4
Catalog Number
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
7A30-373107
7A30-373108
7A30-503104
7A30-503105
7A30-503106
7A30-503107
7A30-503108
7A30-503704
7A30-503705
7A30-503706
7A30-503707
7A30-503708
7A30-503710
7A30-623104
7A30-623105
7A30-623106
7A30-623107
7A30-623108
7A30-623110
7A30-623704
7A30-623705
7A30-623706
7A30-623707
7A30-623708
7A30-623710
O.D.
I.D.
.3750
.3750
.5000
.5000
.5000
.5000
.5000
.5000
.5000
.5000
.5000
.5000
.5000
.6250
.6250
.6250
.6250
.6250
.6250
.6250
.6250
.6250
.6250
.6250
.6250
.3125
.3125
.3125
.3125
.3125
.3125
.3125
.3750
.3750
.3750
.3750
.3750
.3750
.3125
.3125
.3125
.3125
.3125
.3125
.3750
.3750
.3750
.3750
.3750
.3750
.035
.035
.035
.035
.035
.035
.035
.035
.035
.035
.035
+.0005 +.001 Groove

-.0010 -.000 Depth
L
7/8
1
1/2
5/8
3/4
7/8
1
1/2
5/8
3/4
7/8
1
1-1/4
1/2
5/8
3/4
7/8
1
1-1/4
1/2
5/8
3/4
7/8
1
1-1/4
BORE REDUCERS
INCH TO METRIC REDUCTION
MATERIAL:
Inch
Aluminum or Brass where noted*
INSTALLATION RECOMMENDATIONS:
S = set screw positions in hub

C = for single set screw fastening
T = for tangential screw in clamp hub
T
1
SPECIFICATIONS:
Bore reducers with thicker walls may have a slot

extending into opposite wall for additional flexibility.
O.D. and I.D. tolerances are maintained before slitting.
2
L
G
S
S
45
O.D.
I.D.
INCH COMPONENT
G
L
+.0005 +0.025 Groove
in.
-.0010 0
Depth (mm)
in.
mm
O.D.
Catalog Number
A
A
A
A
A
A
A
A
A
*A
*A
*A
*A
*A
A
A
A
A
A
A
A
A
A
A
A
A
7A30-250309
7A30-250312
7A30-250409
7A30-250412
7A30-250416
7A30-250509
7A30-250512
7A30-250516
7A30-250519
7B30-250609
7B30-250612
7B30-250616
7B30-250619
7B30-250622
7A30-310609
7A30-310612
7A30-310616
7A30-310619
7A30-310622
7A30-370512
7A30-370612
7A30-370616
7A30-370619
7A30-370622
7A30-370812
7A30-370816
.2500
.2500
.2500
.2500
.2500
.2500
.2500
.2500
.2500
.2500
.2500
.2500
.2500
.2500
.3125
.3125
.3125
.3125
.3125
.3750
.3750
.3750
.3750
.3750
.3750
.3750
I.D.
3
3
4
4
4
5
5
5
5
6
6
6
6
6
6
6
6
6
6
5
6
6
6
6
8
8
in.
.025
.025
.035
.035
.035
.035
.035
.354 (9)
.472 (12)
.354 (9)
.472 (12)
.625 (16)
.354 (9)
.472 (12)
.625 (16)
.750 (19)
.354 (9)
.472 (12)
.625 (16)
.750 (19)
.865 (22)
.354 (9)
.472 (12)
.625 (16)
.750 (19)
.865 (22)
.472 (12)
.472 (12)
.625 (16)
.750 (19)
.865 (22)
.472 (12)
.625 (16)
Catalog Number
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
7A30-370819
7A30-370822
7A30-500812
7A30-500816
7A30-500819
7A30-500822
7A30-501012
7A30-501016
7A30-501019
7A30-501022
7A30-501212
7A30-501216
7A30-501219
7A30-501222
7A30-621012
7A30-621016
7A30-621019
7A30-621022
7A30-621212
7A30-621216
7A30-621219
7A30-621222
7A30-621412
7A30-621416
7A30-621419
7A30-621422
G
L
+.0005 +0.025 Groove
in.
-.0010 0
Depth (mm)
in.
mm
O.D.
I.D.
.3750
.3750
.5000
.5000
.5000
.5000
.5000
.5000
.5000
.5000
.5000
.5000
.5000
.5000
.6250
.6250
.6250
.6250
.6250
.6250
.6250
.6250
.6250
.6250
.6250
.6250
8
8
8
8
8
8
10
10
10
10
12
12
12
12
10
10
10
10
12
12
12
12
14
14
14
14
in.
.035
.035
.035
.035
.035
.035
.035
.035
NOTE: Dimensions in ( ) are metric sizes.

* Brass
.750 (19)
.865 (22)
.472 (12)
.625 (16)
.750 (19)
.865 (22)
.472 (12)
.625 (16)
.750 (19)
.865 (22)
.472 (12)
.625 (16)
.750 (19)
.865 (22)
.472 (12)
.625 (16)
.750 (19)
.865 (22)
.472 (12)
.625 (16)
.750 (19)
.865 (22)
.472 (12)
.625 (16)
.750 (19)
.865 (22)
6
7
8
9
10
11
12
13
14
15
4-25
16
I
R
T
INTERNAL TOLERANCE RINGS

ALLOWS LOOSER TOLERANCE
LOW COST ASSEMBLY
MOUNTS BALL BEARINGS
Inch
MATERIAL:
301 Stainless Steel

High Carbon Spring Steel
CENTERED ARRANGEMENT
(GROOVED HOUSING)
1
2
d
D' d'
3
b
FREE ARRANGEMENT
(NONGROOVED HOUSING)
INCH COMPONENT
5
6
7
8
9
10
11
12
13
Catalog Number
* High Carbon Spring Steel
S77RH1-012025
S77RH1-018025
S77RH1-018043
S77RH1-018050
S77RH1-025037
S77RH1-025050
S77RH1-031025
S77RH1-031031
S77RH1-031037
S77RH1-031050
S77RH1-037025
S77RH1-037031
S77RH1-037050
S77RH1-037062
301 Stainless Steel
S77RY1-012025
S77RY1-018025
S77RY1-018043
S77RY1-018050
S77RY1-025037
S77RY1-025050
S77RY1-031025
S77RY1-031031
S77RY1-031037
S77RY1-031050
S77RY1-037025
S77RY1-037031
S77RY1-037050
S77RY1-037062
Ring
Dimensions
d Dia.
b
d' Inner
Member
O.D.
+.000
-.001
Ball Bearings
Transfer
lbf
lbf in.
lbf
1/8
3/16
3/16
3/16
1/4
1/4
5/16
5/16
5/16
5/16
3/8
3/8
3/8
3/8
.250
.250
.438
.500
.375
.500
.250
.313
.375
.500
.250
.313
.500
.625
.125
.188
.188
.188
.250
.250
.313
.313
.313
.313
.375
.375
.375
.375
.144/.143
.226/.224
.226/.224
.226/.224
.289/.287
.289/.287
.370/.368
.370/.368
.370/.368
.370/.368
.433/.430
.433/.430
.433/.430
.433/.430
.142/.141
.221/.219
.221/.219
.221/.219
.284/.282
.284/.282
.363/.361
.363/.361
.363/.361
.363/.361
.426/.423
.426/.423
.426/.423
.426/.423
15
25
40
50
65
90
65
80
100
130
190
230
370
470
2.2
3
6
7
9
12
9
11
14
18
15
20
35
40
35
30
65
75
70
95
60
70
90
115
80
105
185
210
1/8
3/16
3/16
3/16
1/4
1/4
5/16
5/16
5/16
5/16
3/8
3/8
3/8
3/8
.250
.250
.438
.500
.375
.500
.250
.313
.375
.500
.250
.313
.500
.625
.125
.188
.188
.188
.250
.250
.313
.313
.313
.313
.375
.375
.375
.375
.144/.143
.226/.224
.226/.224
.226/.224
.289/.287
.289/.287
.370/.368
.370/.368
.370/.368
.370/.368
.433/.430
.433/.430
.433/.430
.433/.430
.142/.141
.221/.219
.221/.219
.221/.219
.284/.282
.284/.282
.363/.361
.363/.361
.363/.361
.363/.361
.426/.423
.426/.423
.426/.423
.426/.423
15
25
40
50
65
90
65
80
100
130
190
230
370
470
2.2
3
6
7
9
12
9
11
14
18
15
20
35
40
35
30
65
75
70
95
60
70
90
115
80
105
185
210
14
15
16
4-26
Max.
Max.
Max.
D'
Outer Member I.D. Radial Load Design Design
Capacity Torque Thrust
For Mounting For Torque
INTERNAL TOLERANCE RINGS

LOW COST ASSEMBLY
R
Inch
MATERIAL:
301 Stainless Steel
(GROOVED HOUSING)
T
1
2
D' d'
3
b
FREE ARRANGEMENT
(NONGROOVED HOUSING)
INCH COMPONENT
Catalog Number
S77RY1-043025
S77RY1-043050
S77RY1-043062
S77RY1-050025
S77RY1-050037
S77RY1-050050
S77RY1-050062
S77RY1-062025
S77RY1-062037
* S77RY1-062050
S77RY1-062062
S77RY1-075025
S77RY1-075050
* S77RY1-075100
S77RY1-087025
S77RY1-087037
* S77RY1-087050
* S77RY1-087075
* S77RY1-100025
S77RY1-100050
S77RY1-100100
S77RY1-112025
S77RY1-112037
S77RY1-112050
S77RY1-125037
S77RY1-125062
S77RY1-125087
* S77RY1-137025
* S77RY1-137037
S77RY1-137075
* S77RY1-150075
* S77RY1-150100
S77RY1-162100
S77RY1-175050
S77RY1-175075
Ring
Dimensions
d Dia.
7/16
7/16
7/16
1/2
1/2
1/2
1/2
5/8
5/8
5/8
5/8
3/4
3/4
3/4
7/8
7/8
7/8
7/8
1
1
1
1-1/8
1-1/8
1-1/8
1-1/4
1-1/4
1-1/4
1-3/8
1-3/8
1-3/8
1-1/2
1-1/2
1-5/8
1-3/4
1-3/4
.250
.500
.625
.250
.375
.500
.625
.250
.375
.500
.625
.250
.500
1.000
.250
.375
.500
.750
.250
.500
1.000
.250
.375
.500
.375
.625
.875
.250
.375
.750
.750
1.000
1.000
.500
.750
d' Inner
Member
O.D.**
+.000
-.002
.438
.438
.438
.500
.500
.500
.500
.625
.625
.625
.625
.750
.750
.750
.875
.875
.875
.875
1.000
1.000
1.000
1.125
1.125
1.125
1.250
1.250
1.250
1.375
1.375
1.375
1.500
1.500
1.625
1.750
1.750

** Inner member tolerance: +.000/-.001 for .438

+.000/-.002 over .438
Max.
Max.
Max.
D'
Outer Member I.D. Radial Load Design Design
Ball Bearings
.495/.492
.495/.492
.495/.492
.558/.555
.558/.555
.558/.555
.558/.555
.683/.680
.683/.680
.683/.680
.683/.680
.828/.825
.828/.825
.828/.825
.953/.950
.953/.950
.953/.950
.953/.950
1.078/1.075
1.078/1.075
1.078/1.075
1.203/1.199
1.203/1.199
1.203/1.199
1.328/1.324
1.328/1.324
1.328/1.324
1.453/1.449
1.453/1.449
1.453/1.449
1.578/1.574
1.578/1.574
1.703/1.699
1.828/1.824
1.828/1.824
Transfer
.488/.485
.488/.485
.488/.485
.551/.548
.551/.548
.551/.548
.551/.548
.676/.673
.676/.673
.676/.673
.676/.673
.819/.816
.819/.816
.819/.816
.944/.941
.944/.941
.944/.941
.944/.941
1.069/1.066
1.069/1.066
1.069/1.066
1.192/1.188
1.192/1.188
1.192/1.188
1.317/1.313
1.317/1.313
1.317/1.313
1.442/1.438
1.442/1.438
1.442/1.438
1.567/1.563
1.567/1.563
1.692/1.688
1.817/1.813
1.817/1.813
lbf
230
470
530
270
410
540
680
320
480
640
800
440
890
1800
580
870
1200
1700
640
1300
2600
720
1100
1440
680
1100
1600
520
780
1600
1600
2200
2300
1200
1800
lbf in.
20
45
50
30
40
55
70
45
70
90
120
70
140
280
100
150
200
290
130
260
390
170
250
330
310
510
720
250
375
750
910
1210
1440
850
1270
lbf
90
205
230
120
160
220
280
145
225
290
385
185
375
745
230
340
455
660
260
520
780
300
445
585
495
815
1150
365
545
1090
1215
1615
1770
970
1450
4-27
4
5
6
7
8
9
10
11
12
13
14
15
16
EXTERNAL TOLERANCE RINGS

LOW-COST ASSEMBLY
R
Inch
MATERIAL:

301 Stainless Steel
T
1
2
(GROOVED SHAFT)
3
4
5
b
FREE ARRANGEMENT
(STRAIGHT SHAFT)
6
7
INCH COMPONENT
Catalog Number
S77RH2-025037
S77RH2-031025
S77RH2-031050
S77RH2-037025
S77RH2-037037
S77RH2-037050
301 Stainless Steel
S77RY2-043037
S77RY2-050025
S77RY2-050037
S77RY2-050075
S77RY2-056037
S77RY2-062025
S77RY2-062037
S77RY2-062043
S77RY2-062050
S77RY2-062062
S77RY2-062087
S77RY2-075025
S77RY2-075037
S77RY2-075050
Ring
D Outer
Dimensions Member
in.
I.D. *
D Dia. b
in.
d
Max.
Max.
Max.
Inner Member O.D. Radial Load Design Design
in.
Ball Bearings
Transfer
lbf
lbf in.
lbf
1/4
5/16
5/16
3/8
3/8
3/8
.375
.250
.500
.250
.375
.500
.250
.312
.312
.375
.375
.375
.213/.211
.256/.254
.256/.254
.320/.317
.320/.317
.320/.317
.218/.216
.262/.260
.262/.260
.327/.324
.327/.324
.327/.324
155
55
115
190
280
370
8
8
16
15
25
32
65
50
100
80
135
170
7/16
1/2
1/2
1/2
9/16
5/8
5/8
5/8
5/8
5/8
5/8
3/4
3/4
3/4
.375
.250
.375
.750
.375
.250
.375
.438
.500
.625
.875
.250
.375
.500
.437
.500
.500
.500
.562
.625
.625
.625
.625
.625
.625
.750
.750
.750
.382/.379
.445/.442
.445/.442
.445/.442
.508/.505
.570/.567
.570/.567
.570/.567
.570/.567
.570/.567
.570/.567
.675/.672
.675/.672
.675/.672
.389/.386
.452/.449
.452/.449
.452/.449
.515/.512
.577/.574
.577/.574
.577/.574
.577/.574
.577/.574
.577/.574
.682/.679
.682/.679
.682/.679
300
240
350
710
410
300
460
530
600
760
1100
440
670
880
30
25
40
80
50
45
65
75
85
110
155
65
100
130
140
100
160
320
180
145
210
240
270
350
495
175
265
345
* Outer member tolerance: +.001 / -.000 up to .625

+.002 / -.000 over .625
To be discontinued when present stock is depleted.
9
10
11
12
13
14
15
4-28
REV: 07.03.12 mh
16
WOODRUFF & SQUARE MACHINE KEYS

WOODRUFF KEYS
MATERIAL:
303 Stainless Steel
Inch
H
B
D
T
1
E
May Have Flat
Key Seat Data
INCH COMPONENT
Catalog Number
A
A
A
A
A
A
A
A
A
A
A
A
A
A
9X49-0208
9X49-0210
9X49-0310
9X49-0212
9X49-0312
9X49-0412
9X49-0216
9X49-0316
9X49-0416
9X49-0320
9X49-0420
9X49-0520
9X49-0624
9X49-0832
Key Size
A
B
+.001
-.000
.0625
.0625
.0938
.0625
.0938
.125
.0625
.0938
.125
.0938
.125
.1563
.1875
.250
+.00
-.01
.25
.312
.312
.375
.375
.375
.50
.50
.50
.625
.625
.625
.75
1.00
+.01
-.00
+.005
-.000
.016
.016
.016
.016
.016
.016
.047
.047
.047
.062
.062
.062
.062
.062
.0728
.1038
.0882
.1358
.1202
.1045
.1668
.1511
.1355
.1981
.1825
.1669
.2143
.308
-.0000
Dim.
.0615
.0615
.0928
.0615
.0928
.1240
.0615
.0928
.1240
.0928
.1240
.1553
.1863
.2487
Tol.
+.0015
+.0015
+.0015
+.0015
+.0015
+.0015
+.0015
+.0015
+.0015
+.0015
+.0015
+.0015
+.0017
+.0018
+.01
-.00
+.002
-.000
+.005
-.000
.0262
.0262
.0419
.0262
.0419
.0575
.0262
.0419
.0575
.0419
.0575
.0731
.0887
.1200
.0635
.0635
.0948
.0635
.0948
.126
.0635
.0948
.126
.0948
.126
.1573
.1885
.251
.0372
.0372
.0529
.0372
.0529
.0685
.0372
.0529
.0685
.0529
.0685
.0841
.0997
.131
3
4
5
6
7
SQUARE MACHINE KEYS
MATERIAL:
Carbon Steel
FINISH:
Treated with DRY RUST INHIBITOR

W
Other squares and lengths

INCH COMPONENT
Catalog Number
A
A
A
A
A
A
A
A
A
A
A
A
A
9C39-0416
9C39-0424
9C39-0432
9C39-0440
9C39-0448
9C39-0456
9C39-0464
9C39-0616
9C39-0624
9C39-0632
9C39-0640
9C39-0648
9C39-0656
10
W
W
Width
+.000
-.002
.125
.125
.125
.125
.125
.125
.125
.1875
.1875
.1875
.1875
.1875
.1875
L
Length
.01
.50
.75
1.00
1.25
1.50
1.75
2.00
.50
.75
1.00
1.25
1.50
1.75
Catalog Number
A
A
A
A
A
A
A
A
A
A
A
A
A
9C39-0664
9C39-0672
9C39-0680
9C39-0816
9C39-0824
9C39-0832
9C39-0840
9C39-0848
9C39-0856
9C39-0864
9C39-0872
9C39-0880
9C39-0888
W
Width
+.000
-.002
.1875
.1875
.1875
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
L
Length
11
.01
2.00
2.25
2.50
.50
.75
1.00
1.25
1.50
1.75
2.00
2.25
2.50
2.75
4-29
12
13
14
15
16
KEY STOCK
MATERIAL:
R
T
Carbon Steel, Zinc Electroplate Finish

303 Stainless Steel
Brass
W1
2
3
4
5
6
7
8
9
12"
W2
INCH COMPONENT
Catalog Number
Carbon Steel, Zinc Electroplate Finish
* A 9C40-0212
* A 9C40-0312
A 9C40-0412
A 9C40-0512
A 9C40-0612
A 9C40-0712
A 9C40-0812
A 9C40-A812
A 9C40-B812
A 9C40-C812
A 9C40-D812
303 Stainless Steel
A 9X40-0412
A 9X40-0612
A 9X40-0812
Brass
A 9B40-0412
A 9B40-0612
A 9B40-0812
* These sizes are unplated
10
11
12
13
14
15
16
Inch

on special order.
4-30
Width +.002 / -.000

W1
W2
1/16
3/32
1/8
5/32
3/16
7/32
1/4
5/16
3/8
7/16
1/2
1/16
3/32
1/8
5/32
3/16
7/32
1/4
1/4
1/4
1/4
1/4
1/8
3/16
1/4
1/8
3/16
1/4
1/8
3/16
1/4
1/8
3/16
1/4
HEX & SQUARE STOCK

HEX STOCK
MATERIAL:
Steel - Low Carbon

Stainless Steel - 300 Series
Brass - Alloy C360
Inch
T
1
SAW CUT
BOTH ENDS
3 ft.
INCH COMPONENT
Catalog Number
Carbon Steel
A
A
A
A
A
A
A
A
A
7C21-0336
7C21-0436
7C21-0536
7C21-0636
7C21-0736
7C21-0836
7C21-1036
7C21-1236
7C21-1436
Stainless Steel
A
A
A
A
A
A
A
A
A
A
A
A
7X21-0336
7X21-0436
7X21-0536
7X21-0636
7X21-0736
7X21-0836
7X21-1036
7X21-1236
7X21-1436
7X21-1836
7X21-2036
7X21-2436
A
A
A
A
A
A
A
A
A
Brass
H
Hex
Size
7B21-0336
7B21-0436
7B21-0536
7B21-0636
7B21-0736
7B21-0836
7B21-1036
7B21-1236
7B21-1436
.1875
.250
.3125
.375
.4375
.500
.625
.750
.875
1.125
1.250
1.500
4
5
6
7
SQUARE STOCK
MATERIAL:
Steel - Low Carbon

Stainless Steel - 300 Series
Brass - Alloy C360
9
SAW CUT
ENDS
3 ft.
10
INCH COMPONENT
11
Catalog Number
Carbon Steel
A
A
A
A
A
A
A
A
A
A
A
7C22-0336
7C22-0436
7C22-0536
7C22-0636
7C22-0736
7C22-0836
7C22-1036
7C22-1236
7C22-1436
7C22-1636
7C22-1836
Brass
H
Dim.
7B22-0336
7B22-0436
7B22-0536
7B22-0636
A 7B22-0836
A 7B22-1036
A 7B22-1236
0.1875
0.2500
0.3125
0.3750
.4375
0.5000
0.6250
0.7500
0.8750
1.0000
1.125
Stainless Steel
A
A
A
A
7X22-0336
7X22-0436
7X22-0536
7X22-0636
A 7X22-0836
A 7X22-1236
A 7X22-1436
A
A
A
A
12
13
14
15
4-31
16
HOLE BUSHINGS
SQUARE HOLE BUSHINGS
MATERIAL:
4140 Steel
T
1
Inch
FEATURES:
Fits ANY mating size collet, or 3-jawed chucks.

Provides good concentricity without time
consuming adjustments.
Costs a fraction of the price of square collets.
HARDNESS:
Rc 40-45
* Before Slotting
3
4
5
6
7
8
9
F.D.
O.D.
*A .001 SQ.
L
INCH COMPONENT
Catalog Number
A
A
A
A
A
A
A
A
A
A
A
A
A
7C18-03
7C18-04
7C18-05
7C18-06
7C18-07
7C18-08
7C18-10
7C18-12
7C18-14
7C18-16
7C18-18
7C18-19
7C18-20
Tool
Bit
Size
A
Square
L
Length
O.D.
F.D.
W
Flange
Width
3/16
1/4
5/16
3/8
7/16
1/2
5/8
3/4
7/8
1
1-1/8
1-3/16
1-1/4
.1915
.255
.3175
.380
.4425
.505
.630
.755
.880
1.008
1.130
1.190
1.260
3/4
1
1
1
1-1/4
1-1/4
1-1/2
1-1/2
1-3/4
2
2
2
2
.375
.468
.562
.656
.750
.812
1.000
1.187
1.375
1.562
1.750
1.812
2.000
1/2
9/16
11/16
3/4
7/8
7/8
1-1/8
1-3/8
1-1/2
1-5/8
1-7/8
2
2-1/8
1/16
1/16
1/16
1/16
1/16
1/16
1/16
1/8
1/8
1/8
1/8
1/8
1/8
HEX HOLE SLEEVES
10
MATERIAL:
Carbon Steel AISI C1117,

May be Case-Hardened
11
12
13
14
15
16
O.D.
INCH COMPONENT
Catalog Number
A
A
A
A
A
A
A
A
4-32
7C20-02
7C20-03
7C20-04
7C20-05
7C20-06
7C20-07
7C20-08
7C20-10
H
Hex Size
.001
.128
.190
.253
.315
.378
.440
.503
.628
L
Length
O.D.
(Stock)
3/4
1-1/2
2
2-1/4
2-1/2
2-5/8
2-3/4
3-1/4
1/4
3/8
1/2
9/16
5/8
3/4
13/16
1
SQUARE HOLE SLEEVE

PLAIN
THREADED
MATERIAL:
Inch
C.R.S. 1117 ( May be Case-Hardened)
CONCENTRICITY:
.003 T.I.R. Between O.D & Square Hole
SPECIFICATION:
Square Hole Sleeves are available in two styles:

One with a tapped hole at one end to receive a
back-up screw which we supply.
Other with a squared hole end to end without
thread or back-up screw.
Sleeves also may be ordered with .015 grinding stock

on O.D., if desired. Add G to catalog number.
Tolerance is the same as on standard O.D.
3
4
E THD.
C +.0005
-.0000
A .001
7
INCH COMPONENT
Tool
Bit
Size
A
Square
B
Length
C
O.D.
D
Thread
Depth
E
Thread
7C19-P012
7C19-P018
7C19-P025
7C19-P031
7C19-P037
7C19-P043
7C19-P050
7C19-P062
7C19-P075
7C19-P087
7C19-P100
7C19-P125
1/8
3/16
1/4
5/16
3/8
7/16
1/2
5/8
3/4
7/8
1
1-1/4
0.1280
0.1915
0.2550
0.3175
.380
.4425
.505
.630
.755
.880
1.008
1.260
3/4
1-1/2
2
2-1/4
2-1/2
2-5/8
2-3/4
3-1/4
4
4
5
5
0.2187
0.3125
.4375
.5000
.5937
0.6875
0.7812
0.9375
1.1250
1.3125
1.5000
2.0000
7C19-T012
7C19-T018
7C19-T025
7C19-T031
7C19-T037
7C19-T043
7C19-T050
7C19-T062
7C19-T075
7C19-T087
7C19-T100
7C19-T125
1/8
3/16
1/4
5/16
3/8
7/16
1/2
5/8
3/4
7/8
1
1-1/4
0.1280
0.1915
0.2550
.3175
.380
.4425
.505
.630
.755
.880
1.0080
1.2600
3/4
1-1/2
2
2-1/4
2-1/2
2-5/8
2-3/4
3-1/4
4
4
5
5
0.2187
0.3125
0.4375
.5000
.5937
.6875
0.7812
0.9375
1.1250
1.3125
1.5000
2.0000
1/4
7/16
1/2
9/16
5/8
5/8
5/8
1
1
1
1-1/2
1-1/2
#10-32
1/4-28
5/16-24
3/8-24
1/2-20
1/2-20
5/8-18
3/4-16
1-14
1-14
1-1/8-12
1-1/2-12
Catalog Number
Plain
A
A
A
A
A
A
A
A
A
A
A
A
Threaded
A
A
A
A
A
A
A
A
A
A
A
A
4-33
8
9
10
11
12
13
14
15
16
5 - BEARINGS
R
Inch
T
1
Precision Ball Bearings, Plain

pg. 5-6
Precision Ball Bearings, Flanged

pg. 5-7
Ultraprecision Ball Bearings

pg. 5-8
Precision Ball Bearings with

Modified Dimensions pg. 5-8
Ball Bearings, Plain

pg. 5-9
Ball Bearings, Flanged

pg. 5-10
Extended Inner Ring Ball Bearings,

Plain
pg. 5-11
Extended Inner Ring Ball Bearings,

Flanged
pg. 5-12
Plastic Race Ball Bearings

pg. 5-13
Linear Ball Bearings, Closed Type

pgs. 5-14 & 5-16
Linear Ball Bearings, Open Type

pgs. 5-15 & 5-17
Linear Ball Bearings, Adjustable Type

pg. 5-18
2
3
4
5
6
7
8
9
10
11
Frelon Lined Linear Bearings,

Precision Series pgs. 5-20 & 5-21

Standard Series pgs. 5-22 & 5-23
12
13
14

Self-Aligning
pg. 5-24
Frelon Lined Sleeve Bearings,

Plain
pg. 5-25
Frelon Lined Sleeve Bearings,

Flanged
pg. 5-26
Linear Plain Bearings, Open Series

pg. 5-28
Linear Plastic Bearings, Closed Series

pg. 5-29
15
16
5-2
Linear Plain Bearings, Closed Series
pg. 5-27
5 - BEARINGS
R
Inch
Ultraprecision Sintered Bronze

Bearings, Plain
pg. 5-31
Ultraprecision Sintered Bronze

Bearings, Flanged
pg. 5-32
Sintered Bearings, Plain

Long L Series pg. 5-33
T
1
2
3
Sintered Bearings, Plain & Flanged

B Series
pg. 5-33
Sintered Bearings, Plain & Flanged

Thick Wall G Series
pg. 5-34

Standard P Series pgs. 5-35 & 5-36
4
5
Sintered Bearings, Flanged

Standard F Series pg. 5-37

S Series pgs. 5-38 thru 5-43
Sintered Bearings, Flanged

S Series pgs. 5-44 thru 5-46
6
7
8
Sintered Solid Bar Stock

pg. 5-47
Sintered Cored Bar Stock

pg. 5-48
Nonmetallic Sleeve & Flanged

Ertalyte Bearings
pg. 5-50
9
10
Nonmetallic Sleeve & Flanged

Acetron Bearings pg. 5-51
Sleeve Bearings, General Purpose

G300 Polymer
pg. 5-52
Flanged Bearings, General Purpose

G300 Polymer
pgs. 5-53 & 5-54
11
12
13
Sleeve Bearings, High-Temperature

T500 Polymer
pg. 5-56
Flanged Bearings, High-Temperature

T500 Polymer
pgs. 5-57 & 5-58
Sleeve Bearings, Industrial Grade

M250 Polymer
pg. 5-60
14
15
5-1
Flanged Bearings, Industrial Grade
M250 Polymer pgs. 5-61 & 5-62
Clip Bearings with Beveled Edges

M250 Polymer
pg. 5-63
Clip Bearings, Double Flange

M250 Polymer
pg. 5-64
16
5 - BEARINGS
R
Inch
T
1
Self-Clinching Sintered Bronze

Self-Aligning Pressbearings pg. 5-67
Self-Clinching PTFE Bronze

Self-Clinching PTFE Bronze

Nonaligning Pressbearings pg. 5-70
Self-Clinching PTFE Acetal

Press-Fit Sintered Bronze

Press-Fit Acetal Self-Aligning

Pressbearings
pg. 5-75
Flange-Mounted Sintered Bronze

Self-Aligning Bearings pg. 5-76
Flange-Mounted PTFE Bronze

Self-Aligning Bearings pg. 5-77
Flange-Mounted PTFE Bronze

Nonaligning Bearings pg. 5-78
Flange-Mounted PTFE-Filled Acetal

Self-Aligning Bearings
pg. 5-79
Needle Roller Bearings

pg. 5-80
Inner Races for Needle Bearings

pg. 5-81
Self-Clinching Needle Roller

Needle Roller Self-Aligning

Pressbearings
pg. 5-84
Flange-Mounted Self-Aligning
Needle Roller Bearings pg. 5-85
Flange-Mounted Nonaligning
Roller Clutches Unidirectional Drive

pg. 5-87
Self-Clinching Nonaligning Needle

Roller Clutch Pressbearings pg. 5-88
Banded Thrust Bearings

Oil Hole
pg. 5-91
Thrust Bearings
pgs. 5-92 & 5-93
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
5-2
Roller Clutches with Bearing Support
Unidirectional Drive
pg. 5-90
5 - BEARINGS
R
Inch
0
Thrust Washers, General Purpose
G300 Polymer
pg. 5-94
Thrust Washers, High-Temperature

T500 Polymer
pg. 5-95
Thrust Washers, Industrial Grade

M250 Polymer
pg. 5-96
T
1
2
3
Frelon Lined Pillow Blocks

Closed Series
pg. 5-97
Frelon Lined Pillow Blocks

Open Series
pg. 5-98
Pillow Block-Mounted Ball Bearings

Miniature
pg. 5-99
4
5
Pillow Block-Mounted Sintered
Bronze Bearings
pg. 5-100
Pillow Block-Mounted PTFE

Bronze Bearings pg. 5-101
Pillow Block-Mounted
6
7
8
Pillow Block Bearings

pg. 5-103
Washdown Pillow Block Bearings

pg. 5-104
Washdown Flange-Mounted Bearings

pg. 5-105
9
10
Die Cast Bearing Blocks

pg. 5-106
Nonmetallic Bearing Blocks

pg. 5-107
Male & Female Rod End Bearings

Plastic
pgs. 5-108 & 5-109
11
12
13
Precision Bearing Housings

pg. 5-111
Bearing Mounting Plates

pg. 5-112
Bearing Hangers, Miniature

pg. 5-112
14
15
5-3
Flange Housings
pg. 5-113
Pillow Block Housings

pg. 5-114
Hardened Steel & Nylon Balls

pg. 5-115
16
SELECTION CHART FOR POLYMER BEARINGS

PART 1 OF 2
R
Material:
G300 (1)
T500 (2)
M250 (3)
L280 (4)
J (5)
Inch
1
2
3
Product Pages:
4
5
6
7
8
pgs. 5-52 & 5-94
pgs. 5-56 & 5-95
pg. 5-60
pg. 5-106
pg. 5-27
GENERAL PROPERTIES
Density
g/cm3 (oz./in.3)
Color
Max. moisture
absorption at
23C (73F) / 50% r.h.
% weight
Max. moisture
absorption
% weight
Coefficient of sliding
friction, dynamic
against steel
p x v-value, max. (dry)
kgf/cm2 x m/min.
(lbf/in.2 x ft./min.)
1.45 (.84)
1.44 (.83)
1.14 (.66)
1.24 (.72)
1.49 (.86)
Dark gray
Black
Charcoal
Yellow
Yellow
0.7
0.1
1.4
1.3
0.3
0.5
7.6
6.5
1.3
0.08 ... 0.15
0.09 ... 0.27
0.1 ... 0.3
0.08 ... 0.23
0.06 ... 0.18
257 (11993)
808 (37705)
73 (3407)
141 (6580)
208 (9706)
MECHANICAL PROPERTIES
9
10
11
12
13
Modulus of elasticity
N/mm2 (ksi)
Tensile strength at
20C (68F)
N/mm2 (ksi)
Compressive strength
N/mm2 (ksi)
Max. permissible static
surface pressure
20C (68F)
N/mm2 (ksi)
Shore D-hardness
For Additional
Data
14
15
16
5-4
7798 (1131)
8098 (1174)
838 (122)
3499 (507)
2399 (348)
210 (30.5)
170 (24.7)
112 (16.2)
125 (18.1)
73 (10.6)
78 (11.3)
100 (14.5)
52 (7.5)
61 (8.8)
60 (8.7)
80 (11.6)
150 (21.8)
18 (2.6)
60 (8.7)
35 (5.1)
81
85
79
77
81
(1) See pg. 5-55
(2) See pg. 5-59
(3) See pg. 5-65
(4) See pg. 5-108
(5) See pg. 5-30
SELECTION CHART FOR POLYMER BEARINGS

PART 2 OF 2
R
Material:
G300 (1)
T500 (2)
M250 (3)
L280 (4)
J (5)
Inch
T
1
2
3
Product Pages:
pgs. 5-52 & 5-94
pgs. 5-56 & 5-95
pg. 5-60
pg. 5-108
pg. 5-27
PHYSICAL AND THERMAL PROPERTIES

Max. long-term
application
temperature C (F)
Max. short-term
application
temperature C (F)
Min. application
temperature C (F)
Thermal conductivity
W/m x K (Btu/h ft F)
Coefficient of thermal
expansion (at 23C)
10-5/K (10-5/F)
130 (266)
250 (482)
80 (176)
90 (194)
90 (194)
220 (428)
315 (599)
170 (338)
180 (356)
120 (248)
-40 (-40)
-100 (-148)
-40 (-40)
-40 (-40)
-50 (-58)
0.24 (.14)
0.6 (.39)
0.24 (.14)
0.24 (.14)
0.25 (.14)
9 (5)
5 (2.8)
10 (5.5)
9 (5)
10 (5.5)
ELECTRICAL PROPERTIES
Specific volume
resistance cm
Surface resistance
For Additional
Data
>1013
>105
>1013
>1013
>1013
>1011
>103
>1011
>1012
>1012
(1) See pg. 5-55
(2) See pg. 5-59
(3) See pg. 5-65
(4) See pg. 5-108
(5) See pg. 5-30
BEARING DESIGN CALCULATIONS

FOR LOADS & SPEED
The load carrying capability of sleeve bearings is

expressed by a PV factor in the following formula:
PV =
W
dn
x
=
Ld
P =

V =
W =
L =
d =
n =
load in kgf/cm2 (lbf/in.2) on the

bearing area
shaft surface velocity, m/min. (ft./min.).
bearing load, kgf (lbf)
bearing length, cm (in.)
bearing I.D., cm (in.)
shaft speed (rpm)
Wn
L
COEFFICIENT OF FRICTION AND LIMITING PV DATA

Dynamic Coefficient
Limiting PV
of Friction
kgf/cm2 x m/min.
Material
(Dry against steel)
(lbf/in.2 x ft./min.)
0.19
129 (6019)
Ertalyte TX
0.20
187 (8726)
Acetron NS
0.16
108 (5034)
Delrin 500AF
65 (3033)
0.20
Delrin 500CL
0.39
65 (3033)
Delrin 500
0.09...0.27
808 (37704)
T500 *
0.08...0.15
257 (11992)
G300*
0.1...0.3
73 (3406)
M250*
0.08...0.23
141 (6579)
L280*
*These materials are a registered trademark of Igus, Inc.
5
6
7
8
9
10
11
12
13
14
15
5-5
16
I
R
PRECISION BALL BEARINGS PLAIN

ABEC 5 AND 7
.0002 / .0005 RADIAL PLAY
MATERIAL:
Inch
440C Stainless Steel
T
1
2
3
4
5
6
7
8
LOAD RATING
Bearing
Code
0415
0518
0725
0918
0931
1225
1231
1237
1238
1250
1531
1831
1837
1850
2537
2550
2562
3150
3787
11
12
13
14
15
16
Dynamic
lbf
16
26
35
21
62
35
63
73
73
73
41
41
81
149
43
123
170
62
569
ABEC 5 E
ABEC 7 G
Static
lbf
5
9.5
13
7.5
24
13
24
29
29
29
17
17
34
65
20
54
77
31
273
Lo Li
0415
0518
0725
0918
0931
1225
1231
1237
1238
1250
1531
1831
1837
1850
2537
2550
2562
3150
3787
5-6
.0469
.0550
.0781
.0937
.0937
.1250
.1250
.1250
.1250
.1250
.1562
.1875
.1875
.1875
.2500
.2500
.2500
.3125
.3750
Lubrication
Leave Blank for Oil, MIL-L-6085A
G Grease, Beacon 325 Commercial
Other Lubricants available on
special order
D
Outer
Ring Dia.
+.0000
-.0002
.1562
.1875
.2500
.1875
.3125
.2500
.3125
.3750
.3750
.5000
.3125
.3125
.3750
.5000
.3750
.5000
.6250
.5000
.8750
W2
B D Lo Li
Fig. 2
Single Shield
M Grease, MIL-G-23827A
Fig. 3 Double Shield 2
+.0000
-.0002
B D Lo Li
Fig. 1
No Shield
Bearing
Code
Fig. 1 No Shield 0
B
Bore
W1
Fig. 2 Single Shield 1
Bearing
Code
1
Precision
Component
INCH COMPONENT
CATALOG NUMBER
S9912Y
PS
9
10
W
Fig. 1
.0625
.0781
.0937
.0625
.1094
.0937
.1094
.1094
.1562
.1719
.1094
.1094
.125
.1562
.125
.125
.196
.1562
.2188
Fig. 3
Double Shield
Example:
S9912Y-E1837PS1G is an ABEC 5,
Single-Shielded, Greased Bearing
with 3/16 Bore and 3/8 O.D.
Width
+.000
-.001
W1
Fig. 2
.0937
.0937
.1094
.0937
.1094
.0937
.1094
.1094
.1562
.1719
.1094
.1094
.125
.196
.125
.125
.196
.1562
.2812
B D
Land Dia. (Ref.)

Li Inner
W2
Fig. 3
.0937
.1094
.1406
.0937
.1406
.1094
.1406
.1406
.1562
.1719
.125
.125
.125
.196
.125
.1875
.196
.1562
.2812
Lo Outer
All
Fig.1
Fig. 2 & 3
.081
.093
.122
.118
.173
.161
.173
.173
.200
.200
.221
.221
.235
.276
.285
.330
.364
.362
.521
.124
.159
.193
.161
.270
.216
.270
.270
.300
.300
.279
.279
.325
.412
.344
.431
.510
.450
.741
.134
.167
.205
.167
.282
.228
.282
.282
.321
.321
.285
.285
.341
.433
.348
.452
.544
.460
.783
PRECISION BALL BEARINGS FLANGED

ABEC 5 AND 7
MATERIAL:
Inch
1
Precision
Component
LOAD RATING
Bearing
Code
0415
0518
0725
0918
0931
1225
1231
1237
1238
1531
1831
1837
1850
2537
2550
2562
3150
3787
Dynamic
lbf
16
26
35
21
62
35
63
73
73
41
41
81
149
43
123
170
62
569
Static
lbf
5
9.5
13
7.5
24
13
24
29
29
17
17
34
65
20
54
77
31
273
INCH COMPONENT
CATALOG NUMBER
S9912Y
FS
ABEC 5 E
ABEC 7 G
Bearing
Code
Fig. 1 No Shield 0
Fig. 2 Single Shield 1

Fig. 3 Double Shield 2
Bearing
Code
0415
0518
0725
0918
0931
1225
1231
1237
1238
1531
1831
1837
1850
2537
2550
2562
3150
3787
D
B
Outer
Bore Ring Dia.
+.0000
+.0000
-.0002
.0469
.0550
.0781
.0937
.0937
.1250
.1250
.1250
.1250
.1562
.1875
.1875
.1875
.2500
.2500
.2500
.3125
.3750
-.0002
.1562
.1875
.2500
.1875
.3125
.2500
.3125
.3750
.3750
.3125
.3125
.3750
.5000
.3750
.5000
.6250
.5000
.8750
T
1
Ws
FW
Ws
FWs
FWs
2
3
B F D Lo Li
D Lo Li
B F D Lo Li
Fig. 3
Double Shield
Fig. 2
Single Shield
Fig. 1
No Shield
B F
4
5
6
Lubrication
Other Lubricants available on
special order
Width
+.000
-.001
W
.0625
.0781
.0937
.0625
.1094
.0937
.1094
.1094
.1562
.1094
.1094
.125
.1562
.125
.125
.196
.1562
.2812
WS
.0937
.1094
.1406
.0937
.1406
.1094
.1406
.1406
.1562
.125
.125
.125
.196
.125
.1875
.196
.1562
.2812
Flange Width
+.000
-.002
FW
.013
.023
.023
.018
.018
.023
.023
.023
.030
.023
.023
.023
.042
.023
.023
.042
.031
.062
FWS
.031
.031
.031
.031
.031
.031
.031
.031
.030
.036
.036
.031
.042
.036
.045
.042
.031
.062
Example:
S9912Y-G1837FS2 is an ABEC 7,
Double-Shielded Oiled Bearing with
3/16 Bore and 3/8 O.D.
7
8
9
Land Dia. (Ref.)
F
Flange Dia. Li Inner
Lo Outer
+.000
-.001
All
Fig.1
Fig. 2 & 3
.203
.234
.296
.234
.359
.296
.359
.422
.440
.359
.359
.422
.565
.422
.547
.690
.547
.969
.081
.093
.122
.118
.173
.161
.173
.173
.200
.221
.221
.235
.276
.285
.330
.364
.362
.521
.124
.159
.193
.161
.270
.216
.270
.270
.300
.279
.279
.325
.412
.341
.431
.510
.450
.741
.134
.167
.205
.167
.282
.228
.282
.282
.321
.285
.285
.341
.433
.348
.452
.544
.460
.783
5-7
10
11
12
13
14
15
16
ULTRAPRECISION & PRECISION BALL BEARINGS

ULTRAPRECISION BALL BEARINGS
R
T
1
2
3
ABEC 7
PLAIN AND FLANGED, NO SHIELD
LUBRICATION:
Catalog
Dynamic
Number
lbf
35
S9912Y-UBM-1
35
S9912Y-UBM-1F
139
S9912Y-UB-2
139
S9912Y-UB-2F
161
S9912Y-UB-3
161
S9912Y-UB-3F
Static
lbf
11
11
50
50
63
63
S9912Y-UBM-1
S9912Y-UBM-1F
S9912Y-UB-2
S9912Y-UB-2F
S9912Y-UB-3
S9912Y-UB-3F
1
2
1
2
1
2
10
FW
LOAD RATING
Fig.
No.
Synthetic Oil, MIL-L6085A
Catalog
Number
1
Precision
Component
INCH COMPONENT
Inch
MATERIAL:
Lo Li
D Lo Li
Fig. 2
Flanged
Fig. 1
Plain
B
Bore
+.0001
-.0000
.1248
.1248
.1873
.1873
.2498
.2498
D
W
Outer
Ring Dia. Width
+.000
+.0000
-.0002
.2500
.2500
.5000
.5000
.6250
.6250
B F
-.001
.0937
.0937
.1562
.1562
.196
.196
FW
Flange
Width
+.000
-.002
.023
.042
.042
F
Flange
Dia.
+.000
-.001
.296
.565
.690
Land Dia. (Ref.)

Li
Inner
Lo
Outer
.166
.166
.272
.272
.366
.366
.220
.220
.415
.415
.509
.509
PRECISION BALL BEARINGS WITH MODIFIED DIMENSIONS

ABEC 7
PLAIN AND FLANGED, NO SHIELD
MATERIAL:

W
LUBRICATION:
Synthetic Oil, MIL-L6085A
FW
LOAD RATING
11
12
13
14
15
16
Catalog
Dynamic
Number
lbf
9
S9912Y-G0412FS0
9
S9912Y-G0412PS0
33
S9912Y-G1325PS0
41
S9912Y-G1937PS0
Static
lbf
2.8
2.8
13
15
D Lo Li
B F
Lo Li
Fig. 1
Flanged
Fig.
No.
S9912Y-G0412FS0
S9912Y-G0412PS0
S9912Y-G1325PS0
S9912Y-G1937PS0
1
2
2
2
5-8
B
Bore
+.0000
-.0002
.0400
.0400
.1250
.1875
D
W
Outer
Ring Dia. Width
+.000
+.0000
-.0002
.1250
.1250
.2500
.3750
-.001
.0469
.0469
.0625
.1094
Fig. 2
Plain
INCH COMPONENT
Catalog
Number
FW
Flange
Width
+.000
-.002
.013
F
Flange
Dia.
+.000
-.001
.171
Land Dia. (Ref.)

Li
Inner
Lo
Outer
.059
.059
.165
.221
.098
.098
.220
.285
BALL BEARINGS PLAIN

ABEC 3
MATERIAL:
Inch
LOAD RATING
Bearing
Code
1504
1805
2507
1809
3109
2512
3112
3712
3712W
5012
3115
3118
3718
5018
3725
5025
6225
5031
8737
11250
13762
16275
Dynamic
lbf
16
28
35
19
60
33
60
60
73
73
45
45
76
148
43
88
168
93
575
885
1040
1620
Static
lbf
5.3
9.6
12.1
6.5
22.0
12.2
22.0
22.0
29.0
29.0
17.0
17.0
31.0
64.0
21.0
40.0
77.0
43.0
305.0
505.0
650.0
1030.0
1
W1
W2
2
Lo Li
B D Lo Li
B D Lo Li
B D
Fig. 2
Single Shield
INCH COMPONENT
CATALOG NUMBER
A 7Y55
Bearing
Code
Fig. 3
Double Shield
Example:
A 7Y55-PS3718 is an ABEC 3, SingleShielded Bearing with 3/16 Bore and
3/8 O.D.
Lubrication
Other lubricants available
on special order.
1504
1805
2507
1809
3109
2512
3112
3712
3712W
5012
3115
3118
3718
5018
3725
5025
6225
5031
8737
11250
13762
16275
B
Bore
+.0000
-.0002
.0469
.0550
.0781
.0937
.0937
.1250
.1250
.1250
.1250
.1250
.1562
.1875
.1875
.1875
.2500
.2500
.2500
.3125
.3750
.5000
.6250
.7500
3
4
Fig. 1
No Shield
Fig. 1 No Shield P
Fig. 2 Single Shield PS
Fig. 3 Double Shield PSS
Bearing
Code
D
Outer
Ring
Dia.
+.0000
-.0003
.1562
.1875
.2500
.1875
.3125
.2500
.3125
.3750
.3750
.5000
.3125
.3125
.3750
.5000
.3750
.5000
.6250
.5000
.8750
1.1250
1.3750
1.6250
+.000
-.005
W1
Fig. 2
.0937
.0937
.1094
.0937
.1094
.0937
.1094
.1094
.1562
.1719
.1094
.1094
.1250
.1960
.1250
.1250
.1960
.1562
.2812
.3125
.3438
.4375
6
7
8
Land Dia. (Ref.)
Width
W
Fig. 1
.0625
.0781
.0937
.0625
.1094
.0937
.1094
.1094
.1562
.1719
.1094
.1094
.1250
.1562
.1250
.1250
.1960
.1562
.2188
.2500
.2812
.3125
Li Inner
W2
Fig. 3
.0937
.1094
.1406
.0937
.1406
.1094
.1406
.1406
.1562
.1719
.1250
.1250
.1250
.1960
.1250
.1875
.1960
.1562
.2812
.3125
.3438
.4375
Lo Outer
All
Fig. 1
Fig. 2 & 3
.081
.093
.122
.118
.173
.161
.173
.173
.200
.200
.221
.221
.235
.276
.285
.330
.364
.362
.521
.701
.852
1.020
.124
.159
.193
.161
.270
.216
.270
.270
.300
.300
.279
.279
.325
.412
.344
.431
.510
.450
.741
.913
1.133
1.345
.134
.167
.205
.167
.282
.228
.282
.282
.321
.321
.285
.285
.341
.433
.348
.452
.544
.460
.783
.965
1.233
1.415
5-9
9
10
11
12
13
14
15
16
I
R
BALL BEARINGS FLANGED

ABEC 3
MATERIAL:
T
1
2
3
4
5
Inch
LOAD RATING
Bearing
Code
1504
1805
2507
1809
3109
2512
3112
3712
3712W
3115
3118
3718
5018
3725
5025
6225
5031
8737
Dynamic
lbf
12.8
22.4
28.0
15.2
48.0
26.4
48.0
48.0
58.4
36.0
36.0
60.8
118.4
34.4
70.4
134.4
74.4
460.0
Static
lbf
4.25
7.68
9.68
5.20
17.60
9.76
17.60
17.60
23.20
13.60
13.60
24.80
51.20
16.00
32.00
61.60
34.40
244.00
on special order.
9
10
11
12
13
14
15
16
B F D Lo Li
Lubrication
Bearing
Code
Bearing
Code
1504
1805
2507
1809
3109
2512
3112
3712
3712W
3115
3118
3718
5018
3725
5025
6225
5031
8737
5-10
B
Bore
+.0000
-.0002
.0469
.0550
.0781
.0937
.0937
.1250
.1250
.1250
.1250
.1562
.1875
.1875
.1875
.2500
.2500
.2500
.3125
.3750
D
Outer
Ring
Dia.
Flange
Width
Width
+.000
-.005
Ws
FWs
+.000
-.002
FWs
B F
Fig. 3
Double Shield
Fig. 2
Single Shield
Fig. 1
No Shield
INCH COMPONENT
CATALOG NUMBER
A 7Y55
Fig. 1 No Shield F
Fig. 2 Single Shield FS
Fig. 3 Double Shield FSS
Ws
FW
B F D Lo Li
D Lo Li
6
7
Example:
A 7Y55-FS3718 is an ABEC 3,
Single-Shielded Bearing with
Land Dia. (Ref.)

F
Flange
Dia. Li Inner
Lo Outer
+.0000
-.0003
WS
FW
FWS
+.005
-.002
All
Fig. 1
Fig. 2 & 3
.1562
.1875
.2500
.1875
.3125
.2500
.3125
.3750
.3750
.3125
.3125
.3750
.5000
.3750
.5000
.6250
.5000
.8750
.0625
.0781
.0937
.0625
.1094
.0937
.1094
.1094
.1562
.1094
.1094
.125
.1562
.125
.125
.196
.1562
.2812
.0937
.1094
.1406
.0937
.1406
.1094
.1406
.1406
.1562
.125
.125
.125
.196
.125
.1875
.196
.1562
.2812
.013
.023
.023
.018
.023
.023
.023
.023
.030
.023
.023
.023
.042
.023
.023
.042
.031
.062
.031
.031
.031
.031
.031
.031
.031
.031
.030
.036
.036
.031
.042
.036
.045
.042
.031
.062
.203
.234
.296
.234
.359
.296
.359
.422
.440
.359
.359
.422
.565
.422
.547
.690
.547
.969
.081
.093
.122
.118
.173
.161
.173
.173
.200
.221
.221
.235
.276
.285
.330
.364
.362
.521
.124
.159
.193
.161
.270
.216
.270
.270
.300
.279
.279
.325
.412
.341
.431
.510
.450
.741
.134
.167
.205
.167
.282
.228
.282
.282
.321
.285
.285
.341
.433
.348
.452
.544
.460
.783
EXTENDED INNER RING BALL BEARINGS PLAIN

ABEC 3
MATERIAL:
Inch
LOAD RATING
Bearing
Code
1504
1805
2507
1809
3109
2512
3112
3712
3712W
3115
3118
3718
5018
3725
5025
6225
5031
Dynamic
lbf
17
26
36
14
59
33
60
60
66
33
33
76
140
37
114
159
56
Static
lbf
6
9
14
6
24
13
24
24
26
14
14
33
59
17
57
70
31
1
2
W1
4
Lo Li
B D
Lo Li
1504
1805
2507
1809
3109
2512
3112
3712
3712W
3115
3118
3718
5018
3725
5025
6225
5031
+.0000
-.0002
.0469
.0550
.0781
.0937
.0937
.1250
.1250
.1250
.1250
.1562
.1875
.1875
.1875
.2500
.2500
.2500
.3125
B D
Bearing
Code
Fig. 2
7
Lubrication
on special order.
Bearing
Code
INCH COMPONENT
CATALOG NUMBER
A 7Y55
B
Bore
W1
Fig. 1
Fig. 1 No Shield E
Fig. 2 Double Shield ESS
Example:
A 7Y55-E2512 is an ABEC 3,
No-Shield Bearing with
Width
D
Outer
Ring
Dia.
Land Dia. (Ref.)
+.000
-.005
Inner
8
9
Li Inner
Outer
+.0000
-.0003
W
Fig. 1
W
Fig. 2
W1
Fig.1
W1
Fig.2
.1562
.1875
.2500
.1875
.3125
.2500
.3125
.3750
.3750
.3125
.3125
.3750
.5000
.3750
.5000
.6250
.5000
.0937
.1094
.125
.0937
.1406
.125
.1406
.1406
.1875
.1406
.1406
.1562
.2272
.1562
.1562
.226
.1875
.125
.1406
.1719
.125
.1719
.1406
.1719
.1719
.1875
.1562
.1562
.1562
.2272
.1562
.2188
.226
.1875
.0625
.0781
.0937
.0625
.1094
.0937
.1094
.1094
.1562
.1904
.1094
.125
.196
.125
.125
.196
.1562
.0937
.1094
.1406
.0937
.1406
.1094
.1406
.1406
.1562
.125
.125
.125
.196
.125
.1875
.196
.1562
Lo Outer
Fig. 1 & 2
.123
.150
.193
.163
.269
.217
.269
.297
.321
.279
.279
.329
.433
.342
.429
.544
.449
.077
.091
.122
.117
.176
.157
.176
.204
.200
.220
.220
.232
.276
.283
.330
.364
.362
5-11
REV: 07.03.12 mh
10
11
12
13
14
15
16
EXTENDED INNER RING BALL BEARINGS FLANGED

ABEC 3
MATERIAL:
Inch
LOAD RATING
Bearing
Code
1504
1805
2507
1809
3109
2512
3112
3712
3712W
3115
3118
3718
5018
3725
5025
6225
5031
Dynamic
lbf
12.8
22.4
28
15.2
48
26.4
48
48
52.8
36
36
60.8
112
34.4
70.4
127.2
74.4
Static
lbf
4.24
7.68
9.68
5.2
17.6
9.76
17.6
17.6
20.8
13.6
13.6
24.8
47.2
16.8
32
56
34.4
1
2
W1
W1
4
D Lo Li
B F
D Lo Li
Lubrication
on special order.
Bearing
Code
1504
1805
2507
1809
3109
2512
3112
3712
3712W
3115
3118
3718
5018
3725
5025
6225
5031
+.0000
-.0002
.0469
.0550
.0781
.0937
.0937
.1250
.1250
.1250
.1250
.1562
.1875
.1875
.1875
.2500
.2500
.2500
.3125
Fig. 2
Bearing
Code
D
Outer
Ring
Dia.
B F
INCH COMPONENT
CATALOG NUMBER
A 7Y55
B
Bore
Width
+.000
-.005
Inner
Outer
Flange
Width
+.0000
-.0003
W
Fig. 1
W
Fig. 2
W1
Fig.1
W1
Fig.2
FW1
FW2
.1562
.1875
.2500
.1875
.3125
.2500
.3125
.3750
.3750
.3125
.3125
.3750
.5000
.3750
.5000
.6250
.5000
.0937
.1094
.125
.0937
.1406
.125
.1406
.1406
.1875
.1406
.1406
.1562
.2272
.1562
.1562
.226
.1875
.125
.1406
.1719
.125
.1719
.1406
.1719
.1719
.1875
.1562
.1562
.1562
.2272
.1562
.2188
.226
.1875
.0625
.0781
.0937
.0625
.1094
.0937
.1094
.1094
.1562
.1094
.1094
.125
.196
.125
.125
.196
.1562
.0937
.1094
.1406
.0937
.1406
.1094
.1406
.1406
.1562
.125
.125
.125
.196
.125
.1875
.196
.1562
.013
.023
.023
.018
.023
.023
.023
.023
.030
.023
.023
.023
.042
.023
.023
.042
.031
.031
.031
.031
.031
.031
.031
.031
.031
.030
.036
.036
.031
.042
.036
.045
.042
.031
Example:
A 7Y55-G2512 is an ABEC 3,
No-Shield Bearing with
8
9
Land Dia. (Ref.)

F
Flange Li Inner Lo Outer
Dia.
Fig. 1 & 2
.203
.234
.296
.234
.359
.296
.359
.422
.440
.359
.359
.422
.565
.422
.547
.690
.547
.077
.091
.122
.117
.176
.157
.176
.204
.200
.220
.220
.232
.276
.283
.330
.364
.362
5-12
REV: 07.03.12 mh
FW2
FW1
Fig. 1
Fig. 1 No Shield G
Fig. 2 Double Shield GSS
.123
.150
.193
.163
.269
.217
.269
.297
.321
.279
.279
.329
.433
.342
.429
.544
.449
10
11
12
13
14
15
16
PLASTIC RACE BALL BEARINGS

SINGLE SHIELD
ELECTRICALLY INSULATED
NONCORROSIVE
R
Inch
MATERIAL:
Rings & Cage - Acetal

Balls - Ground Glass or 316 Stainless Steel
T
1
Continuous: -22F to +212F

Intermittent: -67F to +284F
2
W
3
SHIELD
4
B D
5
6
INCH COMPONENT
Catalog Number
Glass
A 7Z
A 7Z
A 7Z
A
A
A
A
A
7Z
7Z
7Z
7Z
7Z
5-G0803
5-G0803A
5-G1103
5-G1306
5-G1306A
5-G1306B
5-G1607
5-G2010
Stainless Steel
A
A
A
A
A
A
7Z
7Z
7Z
7Z
7Z
7Z
A
A
A
A
7Z
7Z
7Z
7Z
5-S0602A
5-S0702
5-S0803
5-S0803A
5-S1103
5-S1105
5-S1306A
5-S1306B
5-S1607
5-S2010
B
Bore
D
O.D.
W
Width
.250
.250
.375
.375
.375
.500
.625
.625
.625
.750
1.000
.625
.750
.875
.875
1.125
1.125
1.375
1.375
1.375
1.625
2.000
.196
.218
.218
.281
.375
.250
.281
.375
.4375
.3125
.500
Load Rating Radial
lbf
Dynamic
Static
26
26
42
42
55
55
69
69
69
78
92
17
17
33
33
43
43
48
48
48
52
61
8
9
10
11
12
13
14
15
5-13
16
I
R
T
1
2
3
4
5
6
7
8
9
10
11
LINEAR BALL BEARINGS CLOSED TYPE

LOW FRICTION COEFFICIENT
HIGH POSITIONING ACCURACY
HIGH LOAD CAPACITY
QUIET MOVEMENT
LONG TRAVEL LIFE
Inch
MATERIAL:
Sleeve & Balls - AISI 52100 Steel

Retainer - Duracon M90
SPECIFICATIONS:
B Bore Tolerance:
.2500, .3750, .5000 & .6250 +.0000/-.00025
.7500 & 1.0000 +.0000/-.00030
1.2500 & 1.5000 +.0000/-.00035
O.D. Tolerance:
.5000
.6250, .8750 & 1.1250
1.2500 & 1.5625
2.0000 & 2.3750
+.0000/-.00045
+.0000/-.00050
+.0000/-.00065
+.0000/-.00075
L Tolerance:
.750, .875, 1.250, 1.500 & 1.625 +.000/-.008
2.250, 2.625 & 3.000 +.000/-.012
L
W
O.D. D
E Tolerance:
.511, .636, .963, 1.104 & 1.166 +.000/-.008
1.755, 2.005 & 2.412 +.000/-.012
INCH COMPONENT
Catalog Number *
S99LBC-025075
S99LBC-038063
S99LBC-050088
S99LBC-063113
S99LBC-075125
S99LBC-100156
S99LBC-125200
S99LBC-150238
Ball
Circuit
B
Bore
O.D.
4
4
4
4
5
6
6
6
.2500
.3750
.5000
.6250
.7500
1.0000
1.2500
1.5000
.5000
.6250
.8750
1.1250
1.2500
1.5625
2.0000
2.3750
Load Rating lbf

D
W
E
L
Groove Groove
Length Groove
Dist. Width Dia. Dynamic Static
.750
.875
1.250
1.500
1.625
2.250
2.625
3.000
.511
.636
.963
1.104
1.166
1.755
2.005
2.412
* To order bearings with no seals, use catalog numbers as they are.

To order bearings with seals at both ends, add S to the end of catalog number.
12
13
14
15
16
5-14
.0390
.0390
.0459
.0559
.0559
.0679
.0679
.0859
.4687
.5880
.8209
1.0590
1.1760
1.4687
1.8859
2.2389
46
51
115
174
194
220
353
490
60
71
176
265
308
353
616
904
LINEAR BALL BEARINGS OPEN TYPE

HIGH LOAD CAPACITY
QUIET MOVEMENT
LONG TRAVEL LIFE
R
Inch
MATERIAL:
Sleeve & Balls - AISI 52100 Steel

Retainer - Duracon M90
SPECIFICATIONS:
B Bore Tolerance:
.5000 & .6250 +.0000/-.00025
.7500 & 1.0000 +.0000/-.00030
1.2500 & 1.5000 +.0000/-.00035
2
3
O.D. Tolerance:
.8750 & 1.1250 +.0000/-.00050
1.2500 & 1.5625 +.0000/-.00065
2.0000 & 2.3750 +.0000/-.00075
L
W1
L Tolerance:
1.250, 1.500 & 1.625 +.000/-.008
2.250, 2.625 & 3.000 +.000/-.012
W1
O.D. D
E Tolerance:
.963, 1.104 & 1.166 +.000/-.008
1.755, 2.005 & 2.412 +.000/-.012
W2
INCH COMPONENT
Catalog Number *
S99LBO-050088
S99LBO-063113
S99LBO-075125
S99LBO-100156
S99LBO-125200
S99LBO-150238
E
W1
W2
Load Rating lbf
D
B
Ball
D
L Groove Groove
Groove Slot Slot
Circuit Bore O.D. Length Dist. Width Dia. Width Angle Dynamic Static
3
3
4
5
5
5
.5000
.6250
.7500
1.0000
1.2500
1.5000
.8750
1.1250
1.2500
1.5625
2.0000
2.3750
1.250
1.500
1.625
2.250
2.625
3.000
.963
1.104
1.166
1.755
2.005
2.412
.0459
.0559
.0559
.0679
.0679
.0859
.8209
1.0590
1.1760
1.4687
1.8859
2.2389
.34
.38
.44
.56
.63
.75
80
80
60
50
50
50
115
174
194
220
353
490
* To order bearings with no seals, use catalog numbers as they are.

To order bearings with seals at both ends, add S to end of catalog number.
176
265
308
353
616
904
8
9
10
11
12
13
14
15
5-15
16
I
R
T
1
LINEAR BALL BEARINGS CLOSED TYPE

HIGH LOAD CAPACITY
QUIET MOVEMENT
LONG TRAVEL LIFE
Inch
MATERIAL:
Sleeve & Balls - AISI 52100 Steel,

hardened to Rc 60-64
Retainer & Side Ring - Resin
SPECIFICATIONS:
2
3
4
5
B Tolerance:
.6250, .7500 & 1.0000 +.0000/-.0004
1.2500 & 1.5000 +.0000/-.0005
O.D.Tolerance:
1.1250 +.0000/-.0005
1.2500 & 1.5625 +.0000/-.0007
2.0000 & 2.3750 +.0000/-.0008
W1
L Tolerance:
1.500 & 1.625 +.000/-.008
2.250, 2.625 & 3.000 +.000/-.012
L
E
W1
O.D. D
E Tolerance:
1.104 & 1.166 +.000/-.008
1.755, 2.005 & 2.412 +.000/-.012
6
7
8
9
10
11
INCH COMPONENT
Catalog Number *
Standard Type
S99LSC-100225W
S99LSC-100225WW
S99LSC-150300WW
Heavy-Duty Type
S99LHC-063150
S99LHC-075163WW
S99LHC-100225WW
S99LHC-125263WW
S99LHC-150300WW
13
14
15
16
B
Bore
O.D.
6
6
6
1.0000
1.0000
1.5000
1.5625
1.5625
2.3750
2.250
2.250
3.000
1.755
1.755
2.412
.0679
.0679
.0859
1.4687
1.4687
2.2389
225
225
499
360
360
921
6
6
8
8
8
.6250
.7500
1.0000
1.2500
1.5000
1.1250
1.2500
1.5625
2.0000
2.3750
1.500
1.625
2.250
2.625
3.000
1.104
1.166
1.755
2.005
2.412
.0559
.0559
.0679
.0679
.0859
1.0590
1.1760
1.4687
1.8859
2.2389
238
265
301
481
663
387
405
481
832
1214
NOTES: WW bearings with wipers on both ends.

W bearings with wipers on one end.
12
5-16
Load Rating lbf

D
W1
E
L
Groove Groove
Length Groove
Dist. Width Dia. Dynamic Static
Ball
Circuit
LINEAR BALL BEARINGS OPEN TYPE

HIGH LOAD CAPACITY
QUIET MOVEMENT
LONG TRAVEL LIFE
R
Inch
MATERIAL:

T
1
SPECIFICATIONS:
B Tolerance:
.5000, .6250, .7500 & 1.0000 +.0000/-.0004
1.2500 & 1.5000 +.0000/-.0005
O.D.Tolerance:
.8750 & 1.1250 +.0000/-.0005
1.2500 & 1.5625 +.0000/-.0007
2.0000 & 2.3750 +.0000/-.0008
3
L
W1
L Tolerance:
1.250, 1.500 & 1.625 +.000/-.008
2.250, 2.625 & 3.000 +.000/-.012
W1
O.D. D
E Tolerance:
.963, 1.104 & 1.166 +.000/-.008
1.755, 2.005 & 2.412 +.000/-.012
W2
INCH COMPONENT
Catalog Number *
Standard Type
S99LSZ-050125WW
S99LSZ-063150WW
S99LSZ-075163WW
S99LSZ-125263WW
S99LSZ-150300WW
Heavy-Duty Type
S99LHZ-063150WW
S99LHZ-075163WW
S99LHZ-100225WW
B
Ball
Circuit Bore
Load Rating
lbf
D
L Groove Groove Groove Slot Slot
O.D. Length Dist. Width Dia. Width Angle Dynamic Static
.8750
1.1250
1.2500
2.0000
2.3750
W1
W2
3
3
4
5
5
.5000
.6250
.7500
1.2500
1.5000
1.250
1.500
1.625
2.625
3.000
.963
1.104
1.166
2.005
2.412
.0459
.0559
.0559
.0679
.0859
.8209
1.0590
1.1760
1.8859
2.2389
.38
.46
.44
.60
.83
80
80
60
50
60
117
178
198
360
499
178
270
315
629
921
4
4
6
.6250 1.1250 1.500

.7500 1.2500 1.625
1.0000 1.5625 2.250
1.104
1.166
1.755
.0559 1.0590
.0559 1.1760
.0679 1.4687
.53
.63
.65
100
100
72
238
265
301
387
405
481
NOTE: Bearings have wipers at both ends.

8
9
10
11
12
13
14
15
5-17
16
I
R
T
1
LINEAR BALL BEARINGS ADJUSTABLE TYPE

HIGH LOAD CAPACITY
QUIET MOVEMENT
LONG TRAVEL LIFE
Inch
MATERIAL:

SPECIFICATIONS:
2
3
4
5
B Tolerance:
.5000, .6250, .7500 & 1.0000 +.0000/-.0004
1.2500 & 1.5000 +.0000/-.0005
O.D.Tolerance:
.8750 & 1.1250 +.0000/-.0005
1.2500 & 1.5625 +.0000/-.0007
2.0000 & 2.3750 +.0000/-.0008
W1
L Tolerance:
1.250, 1.500 & 1.625 +.000/-.008
2.250, 2.625 & 3.000 +.000/-.012
L
E
W1
O.D. D
E Tolerance:
.963, 1.104 & 1.166 +.000/-.008
1.755, 2.005 & 2.412 +.000/-.012
6
7
8
9
10
11
W2
INCH COMPONENT
Catalog Number *
Standard Type
S99LSA-075163WW
S99LSA-100225WW
S99LSA-125263WW
S99LSA-150300WW
Heavy-Duty Type
S99LHA-075163WW
S99LHA-100225WW
S99LHA-125263WW
S99LHA-150300WW
O.D.
13
14
15
5-18
Load Rating
D
W2
W1
E
lbf
L Groove
Groove Groove Slot
Length Dist. Width Dia. Width
Dynamic Static
5
6
6
6
.7500
1.0000
1.2500
1.5000
1.2500
1.5625
2.0000
2.3750
1.625
2.250
2.625
3.000
1.166
1.755
2.005
2.412
.0559
.0679
.0679
.0859
1.1760
1.4687
1.8859
2.2389
.06
.10
.10
.12
198
225
360
499
315
360
629
921
6
8
8
8
.7500
1.0000
1.2500
1.5000
1.2500
1.5625
2.0000
2.3750
1.625
2.250
2.625
3.000
1.166
1.755
2.005
2.412
.0559
.0679
.0679
.0859
1.1760
1.4687
1.8859
2.2389
.06
.10
.10
.12
265
301
481
663
405
481
832
1214
NOTE: Bearings have wipers at both ends.

12
16
B
Ball
Circuit Bore
FRELON LINED LINEAR BEARINGS

R
Inch
0
BEARING LOAD:
Frelon lined bearings can tolerate up to 1500 psi over

the portion of the bearing that is carrying the load.
These bearings carry 4 to 8 times the load of ball
bearings. A 1/2" I.D. Frelon bearing will carry as
much load as a 1" I.D. ball bearing.
RUNNING CLEARANCES:
Precision Series approximately .001". High precision, similar to

preloaded ball bearing.
Standard Series approximately .002". Excellent for parallel shaft

applications, similar to a typical ball bearing.
2
3
WEAR RATE:
Although wear rates are affected by surface finish, shaft

hardness, length of travel, contamination and lubrication,
these bearings last on average 4 to 8 times longer than
ball bearings.
BEARING PV:
P = Pressure in psi on the projected area.

V = Velocity of the wear surface in ft./min.
The maximum PV is 10,000 psi x ft./min.
BEARING SPEED:
The maximum average linear speed without lubrication

is: 140 ft./min. - continuous
400 ft./min. - intermittent
When lubricated, the maximum speed is 400 ft./min.
CANTILEVERED LOADS:
The distance between the bearings and the drive source

or load should not exceed a maximum ratio of 2:1.
LUBRICATION:
Frelon lined bearings are self-lubricating.

Additional lubrication reduces friction up to 50%,
minimizes wear, reduces heat, allows greater speed,
and extends wear life.
Acceptable lubrication includes SAE 10 to 40W,
way lube oils and petroleum-based greases and even
water.
DO NOT USE PTFE FLUOROCARBON AND/OR SILICONE
OILS, GREASE, SPRAY, OR WD40.
NO CATASTROPHIC FAILURE:
No shaft scoring or shock load damage.

Liner dampens shock loads and vibration. These
bearings provide more surface contact area than ball
bearings.
No corrosion or rust.
No temperature induced bearing seizure.
Temperature range of -400F to +500F. Operates with
consistent friction and load bearing characteristics
throughout temperature range. Liner allows heat to
dissipate through the shell.
4
5
6
7
8
9
10
SHAFT FINISH AND HARDNESS:
11
A shaft with a finish 8-12 in. Ra and a hardness of Rc 60

is recommended for best results. Acceptable
performance can be attained with a finish 8-12 in.
Ra and a hardness of Rc 35.
Softer shafting will cause an accelerated wear to both
the shaft and the bearings.
Optional liners are available for both nonhardened shafting and for use in food applications.
12
13
14
15
5-19
16
I
R
FRELON LINED LINEAR BEARINGS CLOSED SERIES

PRECISION SERIES
SELF-LUBRICATING
PERFORMANCE COMPARES TO PRELOADED BALL BEARINGS
LOW COST
Inch
MATERIAL:
SPECIFICATIONS:
2
3
Body - Aluminum, Anodized

Liner - Bonded Frelon
B Tolerance:
.1877
.2502 & .3752
.5002 & .6252
.7503 & 1.0003
1.2504 & 1.5004
2.0004
Precision
Component
+.0007/-.0000
+.0009/-.0000
+.0011/-.0000
+.0013/-.0000
+.0015/-.0000
+.0018/-.0000
D Tolerance:
.3750 to 1.2500 +.0000/-.0010
1.5625 & 2.3750 +.0000/-.0012
3.0000 +.0000/-.0014
L Tolerance:
.562 to 2.250 +.000/-.015
2.625 to 4.000 +.000/-.020
Housing Bore Tolerance:

.3750 to 2.0000 +.0009/-.0000
2.3750 & 3.0000 +.0010/-.0000
J
L
APPLICABLE RETAINING RINGS AND O-RINGS
7
8
9
10
11
12
13
14
Bearing Reference
S99CPC-03F037056
S99CPC-04F050075
S99CPC-06F062087
S99CPC-08F087125
S99CPC-10F112150
S99CPC-12F125162
S99CPC-16F156225
S99CPC-20F200262
S99CPC-24F237300
S99CPC-32F300400
O-Ring
Retaining Ring
A
A
A
A
A
A
A
A
A
A
9Q27-037
9Q27-050
9Q27-062
9Q27-087
9Q27-112
9Q27-125
9Q27-156
9Q27-200
9Q27-237
9Q27-300
A
A
A
A
A
A
A
A
A
6R11M02010
6R11M02013
6R11M03017
6R11M03024
6R11M03027
6R11M03035
6R11M03046
6R11M04054
6R11M04070
INCH COMPONENT
Catalog Number
Nom.
I.D.
B
Bore
D
O.D.
S99CPC-03F037056
S99CPC-04F050075
S99CPC-06F062087
S99CPC-08F087125
S99CPC-10F112150
S99CPC-12F125162
S99CPC-16F156225
S99CPC-20F200262
S99CPC-24F237300
S99CPC-32F300400
3/16
1/4
3/8
1/2
5/8
3/4
1
1-1/4
1-1/2
2
.1877
.2502
.3752
.5002
.6252
.7503
1.0003
1.2504
1.5004
2.0004
.3750
.5000
.6250
.8750
1.1250
1.2500
1.5625
2.0000
2.3750
3.0000
15
16
Catalog Numbers
5-20
H
Max. Effective
J
L
Housing Retaining O-Ring
Load Surface
Ring
Length Bore
Area
lbf
Spacing
Spacing
in.2
.562
.750
.875
1.250
1.500
1.625
2.250
2.625
3.000
4.000
.3750
.5000
.6250
.8750
1.1250
1.2500
1.5625
2.0000
2.3750
3.0000
.375
.437
.562
.875
1.000
1.062
1.625
1.875
2.250
3.000
.125
.187
.250
.312
.312
.500
.625
.750
1.000
110
300
510
975
1470
1905
3525
5145
7050
12525
.110
.200
.340
.650
.980
1.270
2.350
3.430
4.700
8.350
FRELON LINED LINEAR BEARINGS OPEN SERIES

PRECISION SERIES
SELF-LUBRICATING
PERFORMANCE COMPARES TO PRELOADED BALL BEARINGS
LOW COST
Inch
MATERIAL:

Precision
Component
SPECIFICATIONS:
B Tolerance:
.2502
.5002 & .6252
.7503 & 1.0003
1.2504 & 1.5004
+.0009/-.0000
+.0011/-.0000
+.0013/-.0000
+.0015/-.0000
D Tolerance:
.5000 to 1.2500 +.0000/-.0010
1.5625 & 2.3750 +.0000/-.0012
Fig. 1
D
L Tolerance:
.750 to 2.250 +.000/-.015
2.625 to 3.000 +.000/-.020
J
H
L
Fig. 2
D
15
J
H
L
A
60
J
H
L
A
60
Fig. 3
Fig. 4

Catalog Numbers
Fig.
No. Retaining Ring
O-Ring
S99CPZ-04F050075
S99CPZ-08F087125
S99CPZ-10F112150
S99CPZ-12F125162
S99CPZ-16F156225
S99CPZ-20F200262
S99CPZ-24F237300
1
2
3
4
4
4
4
A
A
A
A
A
A
A

.5000 to 2.0000 +.0009/-.0000
2.3750 +.0010/-.0000
Bearing Reference
1/8
60
J
H
L
60
9Q27-050
9Q27-087
9Q27-112
9Q27-125
9Q27-156
9Q27-200
9Q27-237
A
A
A
A
A
A
A
6R11M02010
6R11M03017
6R11M03024
6R11M03027
6R11M03035
6R11M03046
6R11M04054
8
9
INCH COMPONENT
Housing Slot A
Width
Bore
(min.)
Catalog Number
Fig.
No.
Nom.
I.D.
B
Bore
D
O.D.
L
Length
S99CPZ-04F050075
S99CPZ-08F087125
S99CPZ-10F112150
S99CPZ-12F125162
S99CPZ-16F156225
S99CPZ-20F200262
S99CPZ-24F237300
1
2
3
4
4
4
4
1/4
1/2
5/8
3/4
1
1-1/4
1-1/2
.2502
.5002
.6252
.7503
1.0003
1.2504
1.5004
.5000
.8750
1.1250
1.2500
1.5625
2.0000
2.3750
.750
1.250
1.500
1.625
2.250
2.625
3.000
.5000
.8750
1.1250
1.2500
1.5625
2.0000
2.3750
.188
.313
.375
.438
.563
.625
.750
Catalog Number
(Ref.)
Fig.
No.
J
O-Ring
Spacing
Max.
Load
lbf
Effective
Surface
Area
S99CPZ-04F050075
S99CPZ-08F087125
S99CPZ-10F112150
S99CPZ-12F125162
S99CPZ-16F156225
S99CPZ-20F200262
S99CPZ-24F237300
1
2
3
4
4
4
4
.125
.250
.312
.312
.500
.625
.750
300
975
1470
1905
3525
5145
7050
.200
.650
.980
1.270
2.350
3.430
4.700
Dia.
H
Retaining
Ring
Spacing
.094
.094
.136
.136
.136
.201
.201
3/8
5/8
1/8
1/8
1/8
1/8
3/16
.437
.875
1.000
1.062
1.625
1.875
2.250
F
Retention Hole
10
11
12
13
in.2
5-21
14
15
16
I
R

STANDARD SERIES
SELF-LUBRICATING
PROVIDES RUNNING CLEARANCE SIMILAR TO BALL BEARINGS
LOW COST
Inch
MATERIAL:
SPECIFICATIONS:
2
3
B Tolerance:
.1897
.2522 & .3772
.5022 & .6272
.7533 & 1.0033
1.2544 & 1.5044
2.0054
+.0007/-.0000
+.0009/-.0000
+.0011/-.0000
+.0013/-.0000
+.0015/-.0000
+.0018/-.0000
D Tolerance:
.3750 to 1.2500 +.0000/-.0010
1.5625 & 2.3750 +.0000/-.0012
3.0000 +.0000/-.0014
L Tolerance:
.562 to 2.250 +.000/-.015
2.625 to 4.000 +.000/-.020

.3750 to 2.0000 +.0009/-.0000
2.3750 & 3.0000 +.0010/-.0000
9
10
11
12
13
14
15
16
J
L

Bearing Reference

S99CSC-03F037056
S99CSC-04F050075
S99CSC-06F062087
S99CSC-08F087125
S99CSC-10F112150
S99CSC-12F125162
S99CSC-16F156225
S99CSC-20F200262
S99CSC-24F237300
S99CSC-32F300400
Catalog Numbers
Retaining Ring
A
A
A
A
A
A
A
A
A
A
9Q27-037
9Q27-050
9Q27-062
9Q27-087
9Q27-112
9Q27-125
9Q27-156
9Q27-200
9Q27-237
9Q27-300
O-Ring
A
A
A
A
A
A
A
A
A
6R11M02010
6R11M02013
6R11M03017
6R11M03024
6R11M03027
6R11M03035
6R11M03046
6R11M04054
6R11M04070
INCH COMPONENT
Catalog Number
Nom.
I.D.
B
Bore
D
O.D.
S99CSC-03F037056
S99CSC-04F050075
S99CSC-06F062087
S99CSC-08F087125
S99CSC-10F112150
S99CSC-12F125162
S99CSC-16F156225
S99CSC-20F200262
S99CSC-24F237300
S99CSC-32F300400
3/16
1/4
3/8
1/2
5/8
3/4
1
1-1/4
1-1/2
2
.1897
.2522
.3772
.5022
.6272
.7533
1.0033
1.2544
1.5044
2.0054
.3750
.5000
.6250
.8750
1.1250
1.2500
1.5625
2.0000
2.3750
3.0000
5-22
H
Max. Effective
J
L
Housing Retaining O-Ring
Load Surface
Ring
Length Bore
Area
Spacing Spacing lbf
in.2
.562
.750
.875
1.250
1.500
1.625
2.250
2.625
3.000
4.000
.3750
.5000
.6250
.8750
1.1250
1.2500
1.5625
2.0000
2.3750
3.0000
.375
.437
.562
.875
1.000
1.062
1.625
1.875
2.250
3.000
.125
.187
.250
.312
.312
.500
.625
.750
1.000
110
300
510
975
1470
1905
3525
5145
7050
12525
.110
.200
.340
.650
.980
1.270
2.350
3.430
4.700
8.350
FRELON LINED LINEAR BEARINGS OPEN SERIES

STANDARD SERIES
SELF-LUBRICATING
PROVIDES RUNNING CLEARANCE SIMILAR TO BALL BEARINGS
LOW COST
Inch
MATERIAL:

SPECIFICATIONS:
D Tolerance:
.8750 to 1.2500 +.0000/-.0010
1.5625 & 2.3750 +.0000/-.0012
L Tolerance:
1.250 to 2.250 +.000/-.015
2.625 & 3.000 +.000/-.020

.8750 to 2.0000 +.0009/-.0000
2.3750 +.0010/-.0000
1/8
60
Fig. 1
J
H
L
A
60
15
J
H
L
Fig. 2
1
2
3
3
3
3
A
A
A
A
A
A
9Q27-087
9Q27-112
9Q27-125
9Q27-156
9Q27-200
9Q27-237
A
A
A
A
A
A
6R11M03017
6R11M03024
6R11M03027
6R11M03035
6R11M03046
6R11M04054
A
60
Fig. 3
J
H
L
8
9
INCH COMPONENT
Catalog Number
Fig.
No.
Nom.
I.D.
B
Bore
D
O.D.
L
Length
S99CSZ-08F087125
S99CSZ-10F112150
S99CSZ-12F125162
S99CSZ-16F156225
S99CSZ-20F200262
S99CSZ-24F237300
1
2
3
3
3
3
1/2
5/8
3/4
1
1-1/4
1-1/2
.5022
.6272
.7533
1.0033
1.2544
1.5044
.8750
1.1250
1.2500
1.5625
2.0000
2.3750
1.250
1.500
1.625
2.250
2.625
3.000
Catalog Number
(Ref.)
Fig.
No.
S99CSZ-08F087125
S99CSZ-10F112150
S99CSZ-12F125162
S99CSZ-16F156225
S99CSZ-20F200262
S99CSZ-24F237300
1
2
3
3
3
3
Dia.
H
Retaining
Ring
Spacing
.136
.136
.136
.136
.201
.201
5/8
1/8
1/8
1/8
3/16
3/16
.875
1.000
1.062
1.625
1.875
2.250
F
Retention Hole
5
6
G
F
Catalog Numbers
Fig.
No. Retaining Ring
O-Ring
S99CSZ-08F087125
S99CSZ-10F112150
S99CSZ-12F125162
S99CSZ-16F156225
S99CSZ-20F200262
S99CSZ-24F237300
T
1
B Tolerance:
.5022 & .6272 +.0011/-.0000
.7533 & 1.0033 +.0013/-.0000
1.2544 & 1.5044 +.0015/-.0000
Bearing Reference
Housing Slot A
Width
Bore
(min.)
.8750
1.1250
1.2500
1.5625
2.0000
2.3750
.312
.375
.437
.562
.625
.750
Effective
Surface
Area
J
O-Ring
Spacing
Max.
Load
.250
.312
.312
.500
.625
.750
975
1470
1905
3525
5145
7050
lbf
in.2
.650
.980
1.270
2.350
3.430
4.700
5-23
10
11
12
13
14
15
16
SELF-ALIGNING
SELF-LUBRICATING
PERFECT RETROFIT FOR ANY PILLOW BLOCK
LOW COST
MATERIAL:
SPECIFICATIONS:
2
3
Inch

B Tolerance:
.2522 & .3772
.5022 & .6272
.7533 & 1.0033
1.2544 & 1.5044
+.0009/-.0000
+.0011/-.0000
+.0013/-.0000
+.0015/-.0000
L Tolerance:
.750 to 2.250 +.000/-.015
2.625 to 3.000 +.000/-.020
4
D
5
6
7
8
9
10
11
12
13

Bearing Reference
S99CAC-04F050075
S99CAC-06F062087
S99CAC-08F087125
S99CAC-10F112150
S99CAC-12F125162
S99CAC-16F156225
S99CAC-20F200262
S99CAC-24F237300
Catalog Numbers
O-Ring
Retaining Ring
A
A
A
A
A
A
A
A
9Q27-050
9Q27-062
9Q27-087
9Q27-112
9Q27-125
9Q27-156
9Q27-200
9Q27-237
A
A
A
A
A
A
A
A
6R11M02010
6R11M02013
6R11M03017
6R11M03024
6R11M03027
6R11M03035
6R11M03046
6R11M04054
INCH COMPONENT
Catalog Number
Nom.
I.D.
B
Bore
S99CAC-04F050075
S99CAC-06F062087
S99CAC-08F087125
S99CAC-10F112150
S99CAC-12F125162
S99CAC-16F156225
S99CAC-20F200262
S99CAC-24F237300
1/4
3/8
1/2
5/8
3/4
1
1-1/4
1-1/2
.2522
.3772
.5022
.6272
.7533
1.0033
1.2544
1.5044
D
O.D.
+.0000
-.0010
.4985
.6235
.8735
1.1235
1.2485
1.5609
1.9984
2.3734
H
J
Retaining
L
O-Ring
Ring
Length
Spacing Spacing
.750
.875
1.250
1.500
1.625
2.250
2.625
3.000
** Allows 1/2 of misalignment capability from centerline (1 overall)
14
15
16
1/2 **
5-24
.437
.562
.875
1.000
1.062
1.625
1.875
2.250
.125
.187
.250
.312
.312
.500
.625
.750
Max.
Load
lbf
300
510
975
1470
1905
3525
5145
7050
Effective
Surface
Area
in.2
.200
.340
.650
.980
1.270
2.350
3.430
4.700
FRELON LINED SLEEVE BEARINGS PLAIN

SELF-LUBRICATING
PV 15000 DRY
REPLACES OILITE AND PLASTIC BEARINGS
R
Inch
MATERIAL:
6061 Aluminum with Frelon Liner
INSTALLATION INSTRUCTIONS:
Option 1 - Slip-Fit
Slip the bearing sleeve into the housing and epoxy
into place with Loctite or similar type of
bonding agent.
CAUTION: Do NOT let any of the adhesive touch
the bearing liner. It will harden and interfere
with the running clearance.
Option 2 - Press-Fit
Freeze the bearings at 0F (-17.78C) for 30-45
minutes. Using gloves, remove from the freezer and
slip the bearings into the housing. As they heat
to room temperature, full contact between the
bearing and housing will be achieved. The greatest
advantage to this technique over traditional
pressing is greater accuracy in alignment.
1
2
3
4
B A
5
6061-T6
ALUMINUM BODY
FRELON
LINING
INCH COMPONENT
A
Bore
Nominal
Catalog Number
S99PS3-030502
S99PS3-030504
S99PS3-040602
S99PS3-040603
S99PS3-040604
S99PS3-061004
S99PS3-061006
S99PS3-071006
S99PS3-081204
S99PS3-081206
S99PS3-081208
S99PS3-101406
S99PS3-101408
S99PS3-121608
B
O.D.
L
Length
.25
.50
.25
.375
.50
.50
.75
.75
.50
.75
1.00
.75
1.00
1.00
I.D.
O.D.
Length
+.001
-.000
+.001
-.000
3/16
3/16
1/4
1/4
1/4
3/8
3/8
7/16
1/2
1/2
1/2
5/8
5/8
3/4
5/16
5/16
3/8
3/8
3/8
5/8
5/8
5/8
3/4
3/4
3/4
7/8
7/8
1
1/4
1/2
1/4
3/8
1/2
1/2
3/4
3/4
1/2
3/4
1
3/4
1
1
.189
.189
.2515
.2515
.2515
.3765
.3765
.439
.5015
.5015
.5015
.6265
.6265
.7515
.3135
.3135
.376
.376
.376
.626
.626
.626
.751
.751
.751
.876
.876
1.001
+.00
-.02
Recommended
Housing Bore
Slip-Fit
+.001
-.000
.3145
.3145
.377
.377
.377
.627
.627
.627
.752
.752
.752
.877
.877
1.002
Press-Fit
+.0005
-.0000
.3125
.3125
.3750
.3750
.3750
.6250
.6250
.6250
.7500
.7500
.7500
.8750
.8750
.9995
7
8
9
10
11
12
13
14
15
5-25
16
I
R
T
FRELON LINED SLEEVE BEARINGS FLANGED

SELF-LUBRICATING
PV 15000 DRY
REPLACES OILITE AND PLASTIC BEARINGS
Inch
MATERIAL:
6061 Aluminum with Frelon Liner
INSTALLATION INSTRUCTIONS:
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Option 1 - Slip-Fit
Slip the bearing sleeve into the housing and epoxy
into place with Loctite or similar type of
bonding agent.
CAUTION: Do NOT let any of the adhesive touch
the bearing liner. It will harden and interfere
with the running clearance.
Option 2 - Press-Fit
Freeze the bearings at 0F (-17.78C) for 30-45
minutes. Using gloves, remove from the freezer and
slip the bearings into the housing. As they heat
to room temperature, full contact between the
bearing and housing will be achieved. The greatest
advantage to this technique over traditional
pressing is greater accuracy in alignment.
SPECIFICATIONS:
Recommended
Housing Bore
Catalog
Number
S99PS4-030502
S99PS4-040602
S99PS4-040603
S99PS4-040604
S99PS4-061004
S99PS4-061006
S99PS4-071006
S99PS4-081204
S99PS4-081206
S99PS4-081208
S99PS4-101406
S99PS4-101408
S99PS4-121608
Slip-Fit Press-Fit
+.0005
+.001
-.0000
-.000
.3145
.3125
.377
.3750
.3750
.377
.377
.3750
.6250
.627
.627
.6250
.627
.6250
.7500
.752
.752
.7500
.7500
.752
.8750
.877
.877
.8750
1.002
.9995
B A
FRELON
LINING
6061-T6
ALUMINUM BODY
INCH COMPONENT
A
Bore
Nominal
Catalog Number
S99PS4-030502
S99PS4-040602
S99PS4-040603
S99PS4-040604
S99PS4-061004
S99PS4-061006
S99PS4-071006
S99PS4-081204
S99PS4-081206
S99PS4-081208
S99PS4-101406
S99PS4-101408
S99PS4-121608
5-26
B
O.D.
L
Length
.25
.25
.375
.50
.50
.75
.75
.50
.75
1.00
.75
1.00
1.00
I.D.
O.D.
Length
+.001
-.000
+.001
-.000
3/16
1/4
1/4
1/4
3/8
3/8
7/16
1/2
1/2
1/2
5/8
5/8
3/4
5/16
3/8
3/8
3/8
5/8
5/8
5/8
3/4
3/4
3/4
7/8
7/8
1
1/4
1/4
3/8
1/2
1/2
3/4
3/4
1/2
3/4
1
3/4
1
1
.189
.2515
.2515
.2515
.3765
.3765
.439
.5015
.5015
.5015
.6265
.6265
.7515
.3135
.376
.376
.376
.626
.626
.626
.751
.751
.751
.876
.876
1.001
+.00
-.02
C
D
Flange Flange
O.D. Thickness
Max.
Max.
.437
.500
.500
.500
.875
.875
.9375
1.000
1.000
1.000
1.000
1.000
1.250
.0625
.125
.125
.125
.125
.125
.125
.125
.125
.125
.125
.125
.125
LINEAR PLAIN BEARINGS CLOSED SERIES

SELF-LUBRICATING
CORROSION- AND DIRT-RESISTANT
MAINTENANCE-FREE
VIBRATION DAMPENING
R
Inch
MATERIAL:

Bearing - J Polymer

SHAFT REQUIREMENTS:

Intermittent: up to +248F
Hard anodized aluminum, 8-16 RMS surface finish.

Other materials such as stainless steel, ceramic,
case-hardened steel & chrome plated steel can
be used, but if hardness is below Rc 50 and surface
finish is outside 8-16 RMS, overall service life
may be affected.
3
4
Recommended for use with Catalog Number:

S40AW6-... Anodized Aluminum Shafting
See page 3-13
L
H
J
O.D.
I.D.
SPECIFICATIONS:
I.D. Tolerance:
.375 to 1.000 is +.0032/+.0016
1.250 to 1.500 is +.0041/+.0020
2.000 is +.0051/+.0024
O.D. Tolerance:
.6250 is
.8750 to 1.1250 is
1.5625 is
2.000 to 3.0000 is
6
7
+.0000/-.0007
+.0000/-.0008
+.0000/-.0010
+.0000/-.0012
BEARING
ENCLOSURE
APPLICABLE RETAINING RINGS & O-RINGS

Bearing
Reference
S99GLP-038062087
S99GLP-050087125
S99GLP-063112150
S99GLP-075124162
S99GLP-100155225
S99GLP-125199262
S99GLP-150236300
S99GLP-200299400
Catalog Numbers
Retaining
O-Ring
Ring
A
A
A
A
A
A
A
A
9Q27-062
9Q27-087
9Q27-112
9Q27-125
9Q27-156
9Q27-200
9Q27-237
9Q27-300
A
A
A
A
A
A
A
A
6R11-040025
6R11-04004
6R11-04006
6R11-04010
6R11-04012
6R11-04016
6R11-04020
6R11-04024
10
11
12
INCH COMPONENT
Catalog Number
Nominal
I.D.
O.D.
L
Length
H
Retaining
Ring
Spacing
S99GLP-038062087
S99GLP-050087125
S99GLP-063112150
S99GLP-075124162
S99GLP-100155225
S99GLP-125199262
S99GLP-150236300
S99GLP-200299400
.375
.500
.625
.750
1.000
1.250
1.500
2.000
.6250
.8750
1.1250
1.1250
1.5625
2.0000
2.3750
3.0000
.870
1.250
1.500
1.620
2.250
2.620
3.000
4.000
.644
.979
1.124
1.186
1.773
2.023
2.440
3.222
Load Rating lbf
J
O-Ring
Spacing
Dynamic
Static
.243
.281
.312
.312
.500
.625
.750
1.000
118
225
338
439
811
1184
1622
2885
828
1575
2365
3077
5678
8287
11358
20198
5-27
13
14
15
16
I
R
T
1
2
3
4
5
6
LINEAR PLAIN BEARINGS OPEN SERIES

DIMENSIONS EQUIVALENT TO THE STANDARD
FOR RECIRCULATING BALL BEARING
SELF-LUBRICATING
OPEN, ANODIZED ALUMINUM HOUSING
FOR SUPPORTED SHAFTS
MAINTENANCE-FREE
SECURE BEARING WITH SET SCREWS
(NOT INCLUDED)
Inch
MATERIAL:

Bearing - J Polymer
SPECIFICATIONS:
Bearing I.D. Tolerance:
.500 to 1.000 +.0032/+.0016
1.250 & 1.500 +.0041/+.0020
2.000 +.0051/+.0024
30
L
H
W2

.8750 & 1.1250 +.0008/-.0000
1.2500 +.001/ -.0000
1.5625 +.0005/-.0000
2.0000 to 3.0000 +.001/ -.0000
W1
Recommended for use with

Catalog Number:
S40AW6... Aluminum Anodized
Shafts, see page 3-13
I.D.
O.D.
7
8
9
INCH COMPONENT
Catalog Number
I.D.
O.D.
L
Length
.012
H
Groove
Distance
W1
Groove
Width
W2
12
S99GLZ-050088125
S99GLZ-063113150
S99GLZ-075125163
S99GLZ-100156225
S99GLZ-125200263
S99GLZ-150238300
S99GLZ-200300400
.5000
.6250
.7500
1.0000
1.2500
1.5000
2.0000
.8750
1.1250
1.2500
1.5625
2.0000
2.3750
3.0000
1.250
1.500
1.625
2.250
2.625
3.000
4.000
.979
1.124
1.186
1.773
2.023
2.440
3.222
.052
.062
.062
.074
.074
.095
.111
.394
.433
.492
.630
.709
.866
1.181
13
Catalog Number
(Ref.)
10
11
14
15
16
S99GLZ-050088125
S99GLZ-063113150
S99GLZ-075125163
S99GLZ-100156225
S99GLZ-125200263
S99GLZ-150238300
S99GLZ-200300400
5-28
d
Dia.
+.004
-.000
.136
.136
.136
.136
.201
.201
.265
Load Capacity
Dynamic p = 725 psi
0
226
340
408
590
1189
1631
2900
90
154
231
277
400
809
1109
1972
Static p = 5075 psi

180
80
118
143
206
416
571
1015
0
1585
2378
2854
4123
8323
11418
20300
90
1078
1617
1942
2804
5659
7765
13804
180
555
832
998
1443
2912
3996
7104
LINEAR PLASTIC BEARINGS CLOSED SERIES

SELF-LUBRICATING
CORROSION- AND DIRT-RESISTANT
LIGHTWEIGHT
Inch
MAINTENANCE-FREE
VIBRATION DAMPENING
0
1
SECURED BY RETAINING RING (NOT INCLUDED)
CAN BE USED WITH ALUMINUM SHAFTING
MATERIAL:

T
1
J Polymer

Intermittent: up to +248F
SHAFT REQUIREMENTS:
Hard anodized aluminum, 8-16 RMS surface finish.

Other materials such as stainless steel, ceramic,
case-hardened steel & chrome plated steel can
be used, but if hardness is below Rc 50 and surface
finish is outside 8-16 RMS, overall service life
may be affected.
3
O.D.
W
I.D.
Recommended for use with Catalog Number:

S40AW6-... Anodized Aluminum Shafting
See page 3-13
SPECIFICATIONS:
I.D. Tolerance:
.500 to .625 is
.750 to 1.000 is
1.250 to 1.500 is
2.000 is
H
L
+.0030/+.0013
+.0036/+.0016
+.0044/+.0020
+.0053/+.0024
O.D. Tolerance:
.875 to 1.125 is +.00000/-.00083
1.250 to 1.5625 is +.00000/-.00098
2.000 to 3.000 is +.00000/-.00118
8
9
APPLICABLE RETAINING RINGS

Bearing
Reference
S99GSP-050088125
S99GSP-063113150
S99GSP-075125162
S99GSP-100156225
S99GSP-125200263
S99GSP-150238300
S99GSP-200300400
Catalog
Numbers
A
A
A
A
A
A
A
10
9Q27-087
9Q27-112
9Q27-125
9Q27-156
9Q27-200
9Q27-237
9Q27-300
11
12
INCH COMPONENT
Catalog Number
Nominal
I.D.
O.D.
S99GSP-050088125
S99GSP-063113150
S99GSP-075125162
S99GSP-100156225
S99GSP-125200263
S99GSP-150238300
S99GSP-200300400
.500
.625
.750
1.000
1.250
1.500
2.000
.875
1.125
1.250
1.5625
2.000
2.375
3.000
h7
H
W
L
Load Rating lbf
Weight
Length Groove Dist. Groove Width
+.000
-.012
1.250
1.500
1.620
2.250
2.625
3.000
4.000
+.008
-.000
1.012
1.095
1.250
1.864
1.984
2.390
3.163
+.004
-.000
.052
.062
.062
.074
.074
.095
.111
Dynamic Static
80
141
204
294
595
816
1452
555
992
1428
2062
4163
5710
10152
5-29
lb.
.02
.04
.05
.09
.18
.28
.55
13
14
15
16
LINEAR PLAIN BEARINGS CLOSED SERIES

J POLYMER
.4
Coefficient of friction
Inch
.3
.2
.1
9.84
19.69
29.53
39.37
49.22
59.05
59.05
Surface Speed (fpm)

Graph 1: Coefficient of friction of J Polymer as
a result of the surface speed; p = 108 psi
3
4
5
.30
.25
.20
.15
.10
.05
.00
12
1450
Load (psi)
11
1450 2175 2900 3625 4350 5075

Load (psi)
Graph 2: Coefficient of friction of J Polymer as
a result of load, v = 1.97 fpm
4500
10
725
145
15
13
1.45
14
.197
19.69
197
Surface Speed (fpm)

Graph 3: Permissible p x v value for J Polymer running dry against steel shaft, at 68 F
15
16
1.97
5-30
1969
ULTRAPRECISION SINTERED BRONZE BEARINGS PLAIN

SELF-LUBRICATING
OIL-IMPREGNATED
R
Inch
MATERIAL:
Porous Sintered Bronze Per MIL-B-5687 Type 1
1
Precision
Component
LUBRICATION:
Vacuum-impregnated with oil per MIL-L-6085
FEATURES:
Economical replacement for ball bearings.
Dimensioned to be readily interchangeable
with comparable ball bearings.
SPECIFICATIONS:
O.D. concentric to bore within .0002.
Faces square to bore within .0003.
Load Speed Rating

Load =
= lbf
rpm
Special bores / O.D.s available on special order

Other lubricants available on special order.
O.D.
5
INCH COMPONENT
Catalog Number
S99BP3-PB031004
S99BP3-PB031006
S99BP3-PB031205
S99BP3-PB031207
S99BP3-PB041206
S99BP3-PB041606
S99BP3-PB051606
S99BP3-PB051609
S99BP3-PB061204
S99BP3-PB061206
S99BP3-PB061604
S99BP3-PB062007
S99BP3-PB062009
S99BP3-PB081606
S99BP3-PB081607
S99BP3-PB082007
S99BP3-PB082009
S99BP3-PB082407
S99BP3-PB082409
S99BP3-PB102007
S99BP3-PB102008
S99BP3-PB122408
S99BP3-PB123210
S99BP3-PB123212
S99BP3-PB162408
S99BP3-PB163208
S99BP3-PB163212
S99BP3-PB164012
S99BP3-PB204416
S99BP3-PB245618
S99BP3-PB327220
Shaft
Size
B
Bore
O.D.
+.0000
-.0003
.0002
+.0000
-.0005
3/64
3/64
3/64
3/64
1/16
1/16
5/64
5/64
3/32
3/32
3/32
3/32
3/32
1/8
1/8
1/8
1/8
1/8
1/8
5/32
5/32
3/16
3/16
3/16
1/4
1/4
1/4
1/4
5/16
3/8
1/2
.0469
.0469
.0550
.0550
.0627
.0627
.0783
.0783
.0939
.0939
.0939
.0939
.0939
.1252
.1252
.1252
.1252
.1252
.1252
.1564
.1564
.1877
.1877
.1877
.2502
.2502
.2502
.2502
.3127
.3752
.5002
.1563
.1563
.1876
.1876
.1876
.2501
.2501
.2501
.1876
.1876
.2501
.3126
.3126
.2501
.2501
.3126
.3126
.3751
.3751
.3126
.3126
.3751
.5001
.5001
.3751
.5001
.5001
.6251
.6876
.8751
1.1251
W
Width
+.000
-.005
.0625
.0937
.0781
.1094
.0937
.0937
.0937
.1406
.0625
.0937
.0625
.1094
.1406
.0937
.1094
.1095
.1406
.1094
.1406
.1094
.125
.125
.1562
.196
.125
.125
.1875
.196
.250
.2812
.3125
6
Load Speed
Rating
lbf x rpm
12000
18000
15000
21000
18000
18000
18000
27000
12000
18000
12000
21000
27000
18000
21000
21000
27000
21000
27000
21000
24000
24000
30000
37000
24000
24000
36000
37000
47000
50000
50000
5-31
7
8
9
10
11
12
13
14
15
16
I
R
ULTRAPRECISION SINTERED BRONZE BEARINGS FLANGED

SELF-LUBRICATING
OIL-IMPREGNATED
Inch
MATERIAL:
Porous Sintered Bronze Per MIL-B-5687 Type 1
1
Precision
Component
LUBRICATION:
Vacuum-impregnated with oil per MIL-L-6085
1
2
FEATURES:
Economical replacement for ball bearings.
Dimensioned to be readily interchangeable
with comparable ball bearings.
SPECIFICATIONS:
Load =
4
5
6
7
8
9
10
11
12
13
14
15
16
O.D. concentric to bore within .0002.

Faces square to bore within .0003.
Load Speed Rating
= lbf
rpm
Special bores / O.D.s available on special order

Other lubricants available on special order.
FW
INCH COMPONENT
Catalog Number
S99BP4-FB031004
S99BP4-FB031006
S99BP4-FB031205
S99BP4-FB031207
S99BP4-FB041207
S99BP4-FB041606
S99BP4-FB051606
S99BP4-FB051609
S99BP4-FB061204
S99BP4-FB061206
S99BP4-FB062007
S99BP4-FB062007A
S99BP4-FB062009
S99BP4-FB081606
S99BP4-FB081607
S99BP4-FB082007
S99BP4-FB082009
S99BP4-FB082407
S99BP4-FB082409
S99BP4-FB102007
S99BP4-FB102008
S99BP4-FB122407
S99BP4-FB122408
S99BP4-FB122408A
S99BP4-FB123210
S99BP4-FB123212
S99BP4-FB162408
S99BP4-FB162408A
S99BP4-FB163208
S99BP4-FB163212
S99BP4-FB164012
S99BP4-FB204416
S99BP4-FB245618
S99BP4-FB327220
5-32
B O.D.
Shaft
Size
B
Bore
O.D.
+.0000
-.0003
.0002
+.0000
-.0005
3/64
3/64
3/64
3/64
1/16
1/16
5/64
5/64
3/32
3/32
3/32
3/32
3/32
1/8
1/8
1/8
1/8
1/8
1/8
5/32
5/32
3/16
3/16
3/16
3/16
3/16
1/4
1/4
1/4
1/4
1/4
5/16
3/8
1/2
.0469
.0469
.0550
.0550
.0627
.0627
.0783
.0783
.0939
.0939
.0939
.0939
.0939
.1252
.1252
.1252
.1252
.1252
.1252
.1564
.1564
.1877
.1877
.1877
.1877
.1877
.2502
.2502
.2502
.2502
.2502
.3127
.3752
.5002
.1563
.1563
.1876
.1876
.1876
.2501
.2501
.2501
.1876
.1876
.3126
.3126
.3126
.2501
.2501
.3126
.3126
.3751
.3751
.3126
.3126
.3751
.3751
.3751
.5001
.5001
.3751
.3751
.5001
.5001
.6251
.6876
.8751
1.1251
W
Width
+.000
-.005
.0625
.0937
.0781
.1094
.1094
.0937
.0937
.1406
.0625
.0937
.1094
.1094
.1406
.0937
.1094
.1094
.1406
.1094
.1406
.1094
.125
.1094
.125
.125
.1562
.196
.125
.125
.125
.1875
.196
.250
.281
.3125
F
Flange
Dia.
.005
.203
.203
.234
.234
.234
.296
.296
.296
.234
.234
.359
.359
.359
.296
.296
.359
.359
.422
.422
.359
.359
.422
.422
.422
.565
.565
.422
.422
.547
.547
.690
.750
.969
1.250
FW
Flange
Width
+.000
-.002
.013
.031
.023
.031
.031
.031
.023
.031
.018
.031
.023
.031
.031
.023
.031
.023
.031
.023
.031
.023
.036
.023
.023
.031
.042
.042
.023
.036
.023
.045
.042
.042
.062
.062
Load
Speed
Rating
lbf x rpm
12000
18000
15000
21000
21000
18000
18000
27000
12000
18000
21000
21000
27000
18000
21000
21000
27000
21000
27000
21000
24000
21000
24000
24000
30000
37000
24000
24000
24000
35000
37000
47000
50000
50000
SINTERED BEARINGS PLAIN AND FLANGED

SINTERED BEARINGS PLAIN
LONG L SERIES
Inch
MATERIAL:
Oil-Impregnated Bronze, Self-Lubricating
T
1
2
L
O.D.
I.D.
INCH COMPONENT
I.D.
Catalog Number
+.001
+.002
+.001
+.003
1/4
1/4
3/8
1/2
1/2
1/2
5/8
3/4
5/16
3/8
1/2
5/8
11/16
3/4
3/4
1*
A 7B 4-L0824
A 7B 4-L0832
A 7B 4-L1232
A 7B 4-L1636A
A 7B 4-L1636B
A 7B 4-L1636C
A 7B 4-L2032
A 7B 4-L2460
* O.D. Tolerance +.001/+.008.
L
Length
O.D.
1/64
3/4
1
1
1-1/8
1-1/8
1-1/8
1
1-7/8
6
7
B SERIES
MATERIAL:
10
O.D.
I.D.
O.D.
I.D.
Fig. 1
11
Fig. 2
INCH COMPONENT
Catalog Number
Fig. 1 Plain Bearings
A 7B 4-BP0624
A 7B 4-BP0824
A 7B 4-BP1024
A 7B 4-BP1224
Fig. 2 Flanged Bearings
A 7B 4-BF0612
A 7B 4-BF0812
A 7B 4-BF1012
A 7B 4-BF1212
I.D.
L
Length
A
Flange Dia.
B
Flange Width
.3145
.377
.503
.503
3/4
3/4
3/4
3/4
.314
.3775
.502
.502
3/8
3/8
3/8
3/8
7/16
15/32
9/16
5/8
1/16
1/16
1/16
1/16
O.D.
+.000
-.001
+.000
-.001
.1885
.253
.314
.3765
.1895
.252
.3135
.3765
.005
.005
12
.003
5-33
13
14
15
16

THICK WALL G SERIES
MATERIAL:
Inch
Other bore sizes available on special order
2
3
4
5
6
7
8
9
10
I.D.
Catalog Number
A 7B 4-GP0404
A 7B 4-GP0408
A 7B 4-GP0412
A 7B 4-GP0608
A 7B 4-GP0612
A 7B 4-GP0616
A 7B 4-GP0620
A 7B 4-GP0808
A 7B 4-GP0812
A 7B 4-GP0816
A 7B 4-GP0820
A 7B 4-GF0404
A 7B 4-GF0408
A 7B 4-GF0412
A 7B 4-GF0608
A 7B 4-GF0612
A 7B 4-GF0616
A 7B 4-GF0620
A 7B 4-GF0808
A 7B 4-GF0812
A 7B 4-GF0816
A 7B 4-GF0820
11
12
13
14
15
16
O.D.
5-34
I.D.
O.D.
I.D.
Fig. 1
INCH COMPONENT
Fig. 2
L
Length
A
Flange Dia.
B
Flange Width
.252
.252
.252
.314
.314
.314
.314
.377
.377
.377
.377
1/8
1/4
3/8
1/4
3/8
1/2
5/8
1/4
3/8
1/2
5/8
.252
.252
.252
.314
.314
.314
.314
.377
.377
.377
.377
1/8
1/4
3/8
1/4
3/8
1/2
5/8
1/4
3/8
1/2
5/8
.360
.360
.360
.370
.370
.370
.370
.560
.560
.560
.560
.047
.047
.047
.047
.047
.047
.047
.047
.047
.047
.047
O.D.
+.001
-.000
+.000
-.001
.126
.126
.126
.188
.188
.188
.188
.251
.251
.251
.251
.126
.126
.126
.188
.188
.188
.188
.251
.251
.251
.251
.005
.005
.0025

STANDARD P SERIES
MATERIAL:
Inch
T
1
O.D.
I.D.
INCH COMPONENT
Catalog Number
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
4-P092
4-P001
4-P164
4-P137
4-P088
4-P089
4-P002
4-P078
4-P150
4-P102
4-P156
4-P076
4-P144
4-P003
4-P136
4-P004
4-P120
4-P006
4-P008
4-P009
4-P158
4-P145
4-P146
4-P126
4-P010
4-P111
4-P117
4-P011
4-P012
4-P013
4-P082
4-P014
4-P090
4-P015
4-P138
4-P016
4-P135
4-P017
4-P173
4-P122
4-P019
* Unless otherwise specified.
I.D.
O.D.
+.001
-.000
+.000
-.001
.1265
.1265
.1265
.1265
.157
.157
.157
.188
.188
.188
.188
.188
.188
.188
.188
.188
.188
.188
.188
.237
.251
.251
.251
.251
.251
.251
.251
.251
.251
.251
.251
.251
.251
.251
.251
.251
.251
.251
.250
.313
.313
.1905
.1905
.253
.253
.253
.253
.253
.253
.253
.253
.253
.253
.253
.253
.253
.284
.3155
.3155
.4405
.378
.378
.3155
.3155
.3155
.3155
.3155
.3155
.3155
.3155
.3155
.378
.378
.378
.378
.378
.378
.4405
.4405
.503
.378
.378
L
Length
.005 *
.125
.250
.250 .244
.414 .410
.125
.187
.265
.187
.210
.243
.305
.330
.343 .337
.406
.468
.186 .182
.249 .245
.500
.500
.250
.296
.115
.169 .163
.187
.234
.250
.348
.390
.437
.500
.218
.312
.406
.500
.570 .566
.719
.407
.437
.218
.125
.208
5-35
4
5
6
7
8
9
10
11
12
13
14
15
16

STANDARD P SERIES
MATERIAL:
Inch
1
L
O.D.
3
4
5
6
7
8
9
10
11
12
13
14
15
16
I.D.
INCH COMPONENT
Catalog Number
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
4-P020
4-P192
4-P021
4-P022
4-P023
4-P024
4-P025
4-P027
4-P028
4-P029
4-P030
4-P133
4-P140
4-P104
4-P098
4-P031
4-P034
4-P035
4-P036
4-P037
4-P038
4-P039
4-P040
4-P041
4-P129
4-P043
4-P115
4-P048
4-P195
4-P049
4-P050
4-P081
4-P052
4-P053
4-P054
4-P109
4-P074
4-P084
4-P056
4-P057
4-P058
5-36
I.D.
O.D.
+.001
-.000
+.000
-.001
.313
.313
.313
.313
.313
.313
.313
.313
.313
.313
.313
.3125
.328
.328
.328
.376
.376
.376
.376
.376
.376
.376
.376
.376
.376
.376
.439
.502
.502
.502
.502
.502
.502
.502
.502
.627
.627
.627
.627
.627
.627
.378
.378
.378
.378
.4405
.4405
.4405
.503
.503
.503
.503
.378
.472
.472
.503
.503
.503
.503
.503
.5655
.5655
.5655
.5655
.628
.628
.628
.5655
.628
.628
.628
.628
.628
.628
.7535
.7535
.7535
.7535
.753
.8785
.8785
.8785
L
Length
.005 *
.281
.370
.421
.487
.187
.250
.500
.312
.437
.703
1.000
.250
.500
.750
.437
.187 .183
.500
.625
.813
.328
.500
.755
.995
.312
.432
.627 .623
.713
.375
.418 .414
.437
.500
.593
1.030
.250
.437 .429
.373
.764 .756
.343
.323
.500
.625
SINTERED BEARINGS FLANGED

STANDARD F SERIES
MATERIAL:
Inch
T
1
2
L
B
A I.D.
O.D.
INCH COMPONENT
Catalog Number
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
4-F042
4-F048
4-F063
4-F043
4-F040
4-F103
4-F002
4-F102
4-F027
4-F054
4-F078
4-F004
4-F106
4-F006
4-F050
4-F007
4-F008
4-F010
4-F053
4-F074
4-F014
4-F016
4-F068
4-F057
4-F041
4-F085
4-F017
4-F067
4-F018
4-F026
4-F021
4-F065
4-F055
4-F082
I.D.
O.D.
+.001
-.000
+.000
-.001
.1245
.125
.126
.1875
.1875
.188
.188
.188
.188
.218
.251
.251
.251
.251
.251
.281
.3125
.375
.376
.376
.377
.438
.438
.438
.500
.501
.501
.501
.501
.501
.501
.626
.626
.626
.2215
.190
.2215
.284
.3155
.253
.2843
.3155
.316
.2825
.3155
.316
.316
.379
.379
.379
.504
.504
.504
.566
.629
.504
.5655
.5655
.628
.629
.629
.629
.629
.754
.754
.7535
.7535
.7535
L*
Length
A
Flange Dia.
.005
B
Flange
Width
.122 .115
.228 .216
.148 .141
.218 .212
.1345 .1265
.349 .344
.281
.240 .234
.375
.207 .202
.500
.156
.250
.406
.578 .573
.2188
.4848
.404
.696 .690
.660
.610 .611
.154 .149
.281
.546
.198 .192
.139 .136
.250
.307
.562
.515
.969
.230
.371
.630
.340
.250
.345
.375
.437
.310
.375
.375
.437
.310
.437
.437
.437
.500
.500
.500
.562
.562
.562
.750
.875
.562
.781
.781
.870
.875
.812
.875
.875
.875
.875
.875
.991
.991
.050 .048
.035 .031
.061 .057
.057 .052
.064 .060
.034 .031
.121 .117
.087 .081
.064 .060
.084 .079
.066 .058
.065 .059
.065 .059
.095 .093
.095 .093
.095 .093
.065 .059
.065 .059
.065 .059
.093 .090
.063 .060
.077 .072
.065 .060
.065 .060
.042 .040
.050 .044
.095 .091
.065 .059
.065 .059
.145 .140
.060 .057
.145 .140
.063 .059
.063 .059
.005
5
6
7
8
9
10
11
12
13
14
15
5-37
REV: 07.13.12 mh
16

S SERIES
MATERIAL:
Inch
O.D.
I.D.
INCH COMPONENT
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Catalog Number
+.000
-.001
+.000
-.001
O.D.
L*
Length
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
.378
.378
.378
.378
.378
.378
.378
.378
.378
.378
.378
.378
.378
.378
.378
.378
.378
.378
.378
.378
.440
.440
.440
.440
.440
.440
.440
.440
.440
.440
.440
.440
.440
.440
.440
.4395
.4395
.4395
.502
.502
.502
.565
.565
.565
.565
.565
.565
.565
.628
.628
.628
.628
.628
.628
.628
.628
.753
.753
.753
.753
.753
.565
.565
.565
.565
.565
.565
.565
.628
.628
.628
.628
.628
.628
.628
.628
.6905
.6905
.6905
.628
.628
.628
3/8
1/2
5/8
3/4
7/8
1
1-1/4
3/8
1/2
5/8
3/4
7/8
1
1-1/4
1-1/2
3/8
1/2
3/4
1
1-1/4
3/8
1/2
5/8
3/4
7/8
1
1-1/4
3/8
1/2
5/8
3/4
7/8
1
1-1/4
1-1/2
1/2
1
1-1/2
3/8
1/2
5/8
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
4-SP121803
4-SP121804
4-SP121805
4-SP121806
4-SP121807
4-SP121808
4-SP121810
4-SP122003
4-SP122004
4-SP122005
4-SP122006
4-SP122007
4-SP122008
4-SP122010
4-SP122012
4-SP122403
4-SP122404
4-SP122406
4-SP122408
4-SP122410
4-SP141803
4-SP141804
4-SP141805
4-SP141806
4-SP141807
4-SP141808
4-SP141810
4-SP142003
4-SP142004
4-SP142005
4-SP142006
4-SP142007
4-SP142008
4-SP142010
4-SP142012
4-SP142204
4-SP142208
4-SP142212
4-SP162003
4-SP162004
4-SP162005
I.D.
* Length Tolerance: up to & including 1-1/2" is .0050

over 1-1/2" is .0075
5-38
Catalog Number
+.000
-.001
+.000
-.001
O.D.
L*
Length
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
.502
.502
.502
.502
.502
.502
.503
.503
.503
.503
.503
.503
.503
.503
.503
.503
.503
.503
.503
.503
.503
.503
.503
.503
.503
.503
.503
.503
.503
.503
.503
.503
.503
.503
.503
.503
.503
.503
.503
.503
.628
.628
.628
.628
.628
.628
.690
.690
.690
.690
.690
.690
.690
.690
.753
.753
.753
.753
.753
.753
.753
.753
.753
.753
.753
.815
.815
.815
.815
.878
.878
.878
.878
.878
.878
.878
1.004
1.004
1.004
1.004
3/4
7/8
1
1-1/8
1-1/4
1-1/2
1/2
5/8
3/4
7/8
1
1-1/8
1-1/4
1-1/2
3/8
1/2
5/8
3/4
7/8
1
1-1/8
1-1/4
1-1/2
1-3/4
2
1/2
3/4
1
1-1/2
1/2
5/8
3/4
7/8
1
1-1/4
1-1/2
3/4
1
1-1/2
2
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
4-SP162006
4-SP162007
4-SP162008
4-SP162009
4-SP162010
4-SP162012
4-SP162204
4-SP162205
4-SP162206
4-SP162207
4-SP162208
4-SP162209
4-SP162210
4-SP162212
4-SP162403
4-SP162404
4-SP162405
4-SP162406
4-SP162407
4-SP162408
4-SP162409
4-SP162410
4-SP162412
4-SP162414
4-SP162416
4-SP162604
4-SP162606
4-SP162608
4-SP162612
4-SP162804
4-SP162805
4-SP162806
4-SP162807
4-SP162808
4-SP162810
4-SP162812
4-SP163206
4-SP163208
4-SP163212
4-SP163216
I.D.

S SERIES
MATERIAL:
Inch
T
1
O.D.
I.D.
INCH COMPONENT
Catalog Number
+.000
-.001
+.000
-.001
O.D.
L*
Length
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
.565
.565
.565
.565
.565
.565
.565
.565
.565
.565
.565
.565
.565
.565
.565
.628
.628
.628
.628
.628
.628
.628
.628
.628
.628
.628
.628
.628
.628
.628
.628
.628
.628
.628
.628
.628
.628
.628
.628
.628
.690
.690
.690
.690
.690
.753
.753
.753
.753
.753
.815
.815
.815
.815
.815
.753
.753
.753
.753
.753
.753
.753
.815
.815
.815
.815
.815
.815
.815
.815
.878
.878
.878
.878
.878
.878
.878
.878
.878
.878
1/2
3/4
1
1-1/4
1-1/2
1/2
3/4
1
1-1/4
1-1/2
1/2
3/4
1
1-1/4
1-1/2
1/2
3/4
7/8
1
1-1/8
1-1/4
1-1/2
1/2
5/8
3/4
7/8
1
1-1/4
1-1/2
1-3/4
1/2
5/8
3/4
7/8
1
1-1/8
1-1/4
1-1/2
1-3/4
2
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
4-SP182204
4-SP182206
4-SP182208
4-SP182210
4-SP182212
4-SP182404
4-SP182406
4-SP182408
4-SP182410
4-SP182412
4-SP182604
4-SP182606
4-SP182608
4-SP182610
4-SP182612
4-SP202404
4-SP202406
4-SP202407
4-SP202408
4-SP202409
4-SP202410
4-SP202412
4-SP202604
4-SP202605
4-SP202606
4-SP202607
4-SP202608
4-SP202610
4-SP202612
4-SP202614
4-SP202804
4-SP202805
4-SP202806
4-SP202807
4-SP202808
4-SP202809
4-SP202810
4-SP202812
4-SP202814
4-SP202816
I.D.

over 1-1/2" is .0075
Catalog Number
+.000
-.001
+.000
-.001
O.D.
L*
Length
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
.628
.628
.628
.628
.628
.628
.628
.628
.628
.628
.628
.628
.690
.690
.690
.690
.690
.690
.753
.753
.753
.753
.753
.753
.753
.753
.753
.753
.753
.753
.753
.753
.753
.753
.753
.753
.753
.753
.753
.941
.941
.941
1.003
1.003
1.003
1.003
1.003
1.003
1.003
1.003
1.003
.878
.878
.878
.878
.878
.878
.878
.878
.878
.878
.878
.878
.878
.878
.878
.941
.941
.941
.941
.941
.941
.941
.941
.941
.941
.941
.941
5/8
3/4
1
1/2
5/8
3/4
7/8
1
1-1/4
1-1/2
1-3/4
2
3/4
1
1-1/4
1-1/2
1-3/4
2
1/2
5/8
3/4
7/8
1
1-1/8
1-1/4
1-1/2
1-5/8
1/2
5/8
3/4
7/8
1
1-1/8
1-1/4
1-1/2
1-5/8
1-3/4
1-7/8
2
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
4-SP203005
4-SP203006
4-SP203008
4-SP203204
4-SP203205
4-SP203206
4-SP203207
4-SP203208
4-SP203210
4-SP203212
4-SP203214
4-SP203216
4-SP222806
4-SP222808
4-SP222810
4-SP222812
4-SP222814
4-SP222816
4-SP242804
4-SP242805
4-SP242806
4-SP242807
4-SP242808
4-SP242809
4-SP242810
4-SP242812
4-SP242813
4-SP243004
4-SP243005
4-SP243006
4-SP243007
4-SP243008
4-SP243009
4-SP243010
4-SP243012
4-SP243013
4-SP243014
4-SP243015
4-SP243016
I.D.

3
4
5
6
7
8
9
10
11
12
13
14
15
5-39
16

S SERIES
MATERIAL:
Inch
O.D.
I.D.
INCH COMPONENT
3
4
5
6
7
8
9
10
11
12
13
14
Catalog Number
+.000
-.001
+.000
-.001
O.D.
L*
Length
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
.753
.753
.753
.753
.753
.753
.753
.753
.753
.753
.753
.753
.753
.753
.753
.753
.753
.753
.753
.753
.753
.753
.815
.815
.815
.815
.815
.815
.815
.815
.878
.878
.878
.878
.878
.878
.878
.878
1.003
1.003
1.003
1.003
1.003
1.003
1.003
1.003
1.003
1.003
1.003
1.128
1.128
1.128
1.128
1.128
1.128
1.128
1.253
1.253
1.253
1.253
1.003
1.003
1.003
1.003
1.003
1.003
1.065
1.065
1.003
1.003
1.003
1.003
1.003
1.003
1.0655
1.128
1/2
5/8
3/4
7/8
1
1-1/8
1-1/4
1-1/2
1-3/4
2
2-1/2
1/2
3/4
1
1-1/4
1-1/2
1-3/4
2
3/4
1
1-1/4
1-1/2
3/4
1
1-1/4
1-1/2
1-3/4
2
1
1-1/4
3/4
7/8
1
1-1/4
1-1/2
1-3/4
1
1-1/4
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
4-SP243204
4-SP243205
4-SP243206
4-SP243207
4-SP243208
4-SP243209
4-SP243210
4-SP243212
4-SP243214
4-SP243216
4-SP243220
4-SP243604
4-SP243606
4-SP243608
4-SP243610
4-SP243612
4-SP243614
4-SP243616
4-SP244006
4-SP244008
4-SP244010
4-SP244012
4-SP263206
4-SP263208
4-SP263210
4-SP263212
4-SP263214
4-SP263216
4-SP263408
4-SP263410
4-SP283206
4-SP283207
4-SP283208
4-SP283210
4-SP283212
4-SP283214
4-SP283408
4-SP283410

over 1-1/2" is .0075
15
16
I.D.
5-40
Catalog Number
+.000
-.001
+.000
-.001
O.D.
L*
Length
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
.878
.878
.878
.878
.878
.878
.878
.878
.878
.878
.878
.878
.878
.878
.878
.878
.878
.940
.940
.940
.940
.940
.940
.940
.940
.940
.940
.940
1.004
1.004
1.004
1.004
1.004
1.004
1.004
1.004
1.004
1.128
1.128
1.128
1.128
1.128
1.128
1.128
1.128
1.128
1.128
1.128
1.128
1.253
1.253
1.253
1.253
1.253
1.190
1.190
1.190
1.190
1.190
1.254
1.254
1.254
1.254
1.254
1.254
1.128
1.190
1.190
1.254
1.254
1.254
1.254
1.254
1.254
3/4
7/8
1
1-1/8
1-1/4
1-3/8
1-1/2
1-5/8
1-3/4
2
2-1/4
2-1/2
3/4
1
1-1/4
1-1/2
2
3/4
1
1-1/4
1-1/2
2
3/4
1
1-1/4
1-1/2
1-3/4
2
3/4
3/4
1
1/2
1
1-1/2
1-3/4
2
2-1/2
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
4-SP283606
4-SP283607
4-SP283608
4-SP283609
4-SP283610
4-SP283611
4-SP283612
4-SP283613
4-SP283614
4-SP283616
4-SP283618
4-SP283620
4-SP284006
4-SP284008
4-SP284010
4-SP284012
4-SP284016
4-SP303806
4-SP303808
4-SP303810
4-SP303812
4-SP303816
4-SP304006
4-SP304008
4-SP304010
4-SP304012
4-SP304014
4-SP304016
4-SP323606
4-SP323806
4-SP323808
4-SP324004
4-SP324008
4-SP324012
4-SP324014
4-SP324016
4-SP324020
I.D.


S SERIES
MATERIAL:
Inch
T
1
O.D.
I.D.
INCH COMPONENT
Catalog Number
+.000
-.001
+.000
-.001
O.D.
L*
Length
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
1.004
1.004
1.004
1.004
1.004
1.004
1.004
1.004
1.004
1.004
1.004
1.004
1.004
1.004
1.004
1.004
1.004
1.004
1.004
1.004
1.004
1.065
1.065
1.065
1.065
1.129
1.129
1.129
1.129
1.129
1.129
1.129
1.129
1.129
1.129
1.129
1.129
1.129
1.129
1.316
1.316
1.316
1.316
1.316
1.316
1.316
1.379
1.379
1.379
1.379
1.379
1.379
1.379
1.504
1.504
1.504
1.504
1.504
1.504
1.504
1.316
1.316
1.316
1.316
1.254
1.254
1.254
1.316
1.316
1.316
1.316
1.316
1.379
1.379
1.379
1.379
1.379
1.379
1
1-1/4
1-1/2
1-3/4
2
2-1/2
3
3/4
1
1-1/4
1-1/2
1-3/4
2
2-1/2
1
1-1/4
1-1/2
1-3/4
2
2-1/2
3
1
1-1/2
2
2-1/2
1
1-1/4
1-1/2
1
1-1/4
1-1/2
1-3/4
2
3/4
1
1-1/4
1-1/2
1-3/4
2
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
4-SP324208
4-SP324210
4-SP324212
4-SP324214
4-SP324216
4-SP324220
4-SP324224
4-SP324406
4-SP324408
4-SP324410
4-SP324412
4-SP324414
4-SP324416
4-SP324420
4-SP324808
4-SP324810
4-SP324812
4-SP324814
4-SP324816
4-SP324820
4-SP324824
4-SP344208
4-SP344212
4-SP344216
4-SP344220
4-SP364008
4-SP364010
4-SP364012
4-SP364208
4-SP364210
4-SP364212
4-SP364214
4-SP364216
4-SP364406
4-SP364408
4-SP364410
4-SP364412
4-SP364414
4-SP364416
I.D.

over 1-1/2" is .0075
O.D. Tolerance: +.000 / -.0015
I.D.
O.D.
Catalog Number
+.000
-.001
+.000
-.001
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
1.129
1.129
1.129
1.129
1.129
1.129
1.129
1.129
1.192
1.192
1.192
1.192
1.192
1.192
1.192
1.192
1.192
1.192
1.192
1.192
1.254
1.254
1.254
1.254
1.254
1.254
1.254
1.254
1.254
1.254
1.254
1.254
1.254
1.254
1.254
1.254
1.254
1.254
1.254
1.379
1.379
1.504
1.504
1.504
1.504
1.504
1.504
1.441
1.441
1.441
1.441
1.441
1.504
1.504
1.504
1.504
1.504
1.504
1.504
1.504
1.504
1.504
1.504
1.504
1.504
1.504
1.504
1.504
1.504
1.504
1.504
1.504
1.504
1.504
1.504
1.566
1.566
1.566
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
4-SP364420
4-SP364424
4-SP364808
4-SP364810
4-SP364812
4-SP364814
4-SP364816
4-SP364820
4-SP384610
4-SP384612
4-SP384616
4-SP384620
4-SP384624
4-SP384808
4-SP384810
4-SP384812
4-SP384814
4-SP384816
4-SP384820
4-SP384824
4-SP404804
4-SP404805
4-SP404806
4-SP404807
4-SP404808
4-SP404809
4-SP404810
4-SP404811
4-SP404812
4-SP404813
4-SP404814
4-SP404815
4-SP404816
4-SP404818
4-SP404820
4-SP404824
4-SP405008
4-SP405012
4-SP405016
L*
Length
2-1/2
3
1
1-1/4
1-1/2
1-3/4
2
2-1/2
1-1/4
1-1/2
2
2-1/2
3
1
1-1/4
1-1/2
1-3/4
2
2-1/2
3
1/2
5/8
3/4
7/8
1
1-1/8
1-1/4
1-3/8
1-1/2
1-5/8
1-3/4
1-7/8
2
2-1/4
2-1/2
3
1
1-1/2
2

3
4
5
6
7
8
9
10
11
12
13
14
15
5-41
16

S SERIES
MATERIAL:
Inch
O.D.
I.D.
INCH COMPONENT
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Catalog Number
+.000
-.001
+.0000
-.0015 Length
O.D.
L*
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
1.254
1.254
1.254
1.254
1.254
1.254
1.254
1.254
1.254
1.254
1.254
1.254
1.316
1.316
1.316
1.316
1.316
1.316
1.316
1.316
1.379
1.379
1.379
1.379
1.379
1.379
1.379
1.379
1.379
1.379
1.379
1.379
1.442
1.442
1.442
1.442
1.442
1.442
1.442
1.442
1.442
1.629
1.629
1.629
1.629
1.629
1.629
1.629
1.754
1.754
1.754
1.754
1.754
1.566
1.566
1.566
1.629
1.629
1.629
1.629
1.629
1.629
1.629
1.629
1.629
1.629
1.629
1.629
1.754
1.754
1.754
1.754
1.754
1.629
1.629
1.629
1.754
1.754
1.754
1.754
1.754
1.754
1
1-1/4
1-1/2
1-3/4
2
2-1/2
3
1-1/2
1-3/4
2
2-1/2
3
1
1-1/2
2
1-1/4
1-1/2
2
2-1/2
3
1
1-1/8
1-1/4
1-1/2
2
2-1/2
3
1
1-1/2
2
2-1/2
3
1
1-1/2
2
3/4
1
1-1/4
1-1/2
1-3/4
2
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
4-SP405208
4-SP405210
4-SP405212
4-SP405214
4-SP405216
4-SP405220
4-SP405224
4-SP405612
4-SP405614
4-SP405616
4-SP405620
4-SP405624
4-SP424808
4-SP424812
4-SP424816
4-SP425210
4-SP425212
4-SP425216
4-SP425220
4-SP425224
4-SP445208
4-SP445209
4-SP445210
4-SP445212
4-SP445216
4-SP445220
4-SP445224
4-SP445608
4-SP445612
4-SP445616
4-SP445620
4-SP445624
4-SP465208
4-SP465212
4-SP465216
4-SP465606
4-SP465608
4-SP465610
4-SP465612
4-SP465614
4-SP465616
I.D.

over 1-1/2" is .0075

over 3" is .0100
I.D. Tolerance: +.000 / -.0015
5-42
Catalog Number
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
4-SP465620
4-SP465624
4-SP485604
4-SP485606
4-SP485608
4-SP485610
4-SP485611
4-SP485612
4-SP485614
4-SP485616
4-SP485618
4-SP485620
4-SP485624
4-SP485808
4-SP485812
4-SP485813
4-SP485816
4-SP485824
4-SP486012
4-SP486016
4-SP486020
4-SP486022
4-SP486024
4-SP486408
4-SP486412
4-SP486416
4-SP486420
4-SP486424
4-SP486428
4-SP506010
4-SP506012
4-SP506014
4-SP506016
4-SP506018
4-SP506020
4-SP506024
4-SP506408
4-SP506412
4-SP506414
4-SP506416
4-SP506420
4-SP506424
I.D.
+.000
-.001
1.442
1.442
1.504
1.504
1.504
1.504
1.504
1.504
1.504
1.504
1.504
1.504
1.504
1.504
1.504
1.504
1.504
1.504
1.504
1.504
1.504
1.504
1.504
1.504
1.504
1.504
1.504
1.504
1.504
1.629
1.629
1.629
1.629
1.629
1.629
1.629
1.629
1.629
1.629
1.629
1.629
1.629
O.D.
L*
1.754
1.754
1.754
1.754
1.754
1.754
1.754
1.754
1.754
1.754
1.754
1.754
1.754
1.816
1.816
1.816
1.816
1.816
1.879
1.879
1.879
1.879
1.879
2.004
2.004
2.004
2.004
2.004
2.004
1.879
1.879
1.879
1.879
1.879
1.879
1.879
2.004
2.004
2.004
2.004
2.004
2.004
2-1/2
3
1/2
3/4
1
1-1/4
1-3/8
1-1/2
1-3/4
2
2-1/4
2-1/2
3
1
1-1/2
1-5/8
2
3
1-1/2
2
2-1/2
2-3/4
3
1
1-1/2
2
2-1/2
3
3-1/2
1-1/4
1-1/2
1-3/4
2
2-1/4
2-1/2
3
1
1-1/2
1-3/4
2
2-1/2
3
+.0000
-.0015 Length


S SERIES
MATERIAL:
Inch
T
1
O.D.
I.D.
INCH COMPONENT
Catalog Number
L*
I.D. O.D. Length
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
1.6915
1.6915
1.6915
1.6915
1.754
1.754
1.754
1.754
1.754
1.754
1.754
1.754
1.754
1.754
1.754
1.940
1.9405
1.9405
1.9405
1.9405
2.004
2.004
2.004
2.004
2.004
2.004
2.004
2.004
2.004
2.004
2.004
2.004
2.004
2.004
2.004
2.004
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
4-SP526814
4-SP526816
4-SP526824
4-SP526832
4-SP546408
4-SP546410
4-SP546412
4-SP546414
4-SP546416
4-SP546420
4-SP546424
4-SP546811
4-SP546812
4-SP546816
4-SP546824
4-SP566820
4-SP567416
4-SP567420
4-SP567424
4-SP567432
4-SP587208
4-SP587212
4-SP587216
4-SP587220
4-SP587224
4-SP587612
4-SP587614
4-SP587616
4-SP587620
4-SP587622
4-SP587624
4-SP587628
4-SP587632
4-SP587808
4-SP587812
4-SP587816
2.1925
2.1925
2.1925
2.1925
2.004
2.004
2.004
2.004
2.004
2.004
2.004
2.129
2.129
2.129
2.129
2.1285
2.3165
2.3165
2.3165
2.3165
2.254
2.254
2.254
2.254
2.254
2.380
2.380
2.380
2.380
2.380
2.380
2.380
2.380
2.505
2.505
2.505
1-3/4
2
3
4
1
1-1/4
1-1/2
1-3/4
2
2-1/2
3
1-3/8
1-1/2
2
3
2-1/2
2
2-1/2
3
4
1
1-1/2
2
2-1/2
3
1-1/2
1-3/4
2
2-1/2
2-3/4
3
3-1/2
4
1
1-1/2
2

over 1-1/2" & including 3" is .0075

over 3" is .0100
I.D. & O.D. Tolerance: up to & including 2-1/2" is +.0000 / -.0015
over 2-1/2" & including 3-1/2" is +.0000 / -.0020
over 3-1/2" is +.0000 / -.0025
Catalog Number
L*
I.D. O.D. Length
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
2.004
2.004
2.004
2.004
2.254
2.254
2.254
2.254
2.254
2.379
2.379
2.379
2.504
2.504
2.504
2.504
2.504
2.504
2.504
2.504
2.504
2.504
2.754
2.754
2.754
2.754
2.754
3.005
3.005
3.005
3.005
3.005
3.005
3.505
3.505
3.505
4.0035
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
4-SP587820
4-SP587824
4-SP587828
4-SP587832
4-SP608016
4-SP608020
4-SP608024
4-SP608216
4-SP608224
4-SP628216
4-SP628220
4-SP628224
4-SP648216
4-SP648220
4-SP648224
4-SP648232
4-SP648418
4-SP648420
4-SP648424
4-SP648616
4-SP648624
4-SP648632
4-SP668612
4-SP668620
4-SP668816
4-SP668824
4-SP668832
4-SP688816
4-SP688824
4-SP689016
4-SP689020
4-SP689024
4-SP689032
4-SP709224
4-SP709228
4-SP709232
4-SP729232
2.505
2.505
2.505
2.505
2.630
2.630
2.630
2.755
2.755
2.755
2.755
2.755
2.754
2.754
2.754
2.754
2.880
2.880
2.880
3.005
3.005
3.005
3.005
3.005
3.255
3.255
3.255
3.255
3.255
3.505
3.505
3.505
3.505
4.006
4.006
4.006
4.504
2-1/2
3
3-1/2
4
2
2-1/2
3
2
3
2
2-1/2
3
2
2-1/2
3
4
2-1/4
2-1/2
3
2
3
4
1-1/2
2-1/2
2
3
4
2
3
2
2-1/2
3
4
3
3-1/2
4
4
3
4
5
6
7
8
9
10
11
12
13
14
15
5-43
16

S SERIES
MATERIAL:
Inch
1
L
A I.D.
3
4
5
6
7
8
9
10
11
12
INCH COMPONENT
I.D.
O.D.
Catalog Number
+.000
-.001
+.000
-.001
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
.127
.127
.189
.189
.189
.252
.252
.252
.252
.252
.314
.314
.314
.314
.314
.314
.377
.377
.377
.377
.377
.377
.377
.377
.377
.377
.377
.377
.377
.377
.315
.315
.3145
.3145
.3145
.377
.377
.377
.377
.377
.377
.439
.439
.502
.502
.502
.502
.502
.502
.502
.502
.502
.502
.5645
.5645
.627
.627
.627
.627
.753
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
4-SF041002
4-SF041003
4-SF061001
4-SF061002
4-SF061003
4-SF081202
4-SF081203
4-SF081204
4-SF081205
4-SF081206
4-SF101203
4-SF101403
4-SF101406
4-SF101603
4-SF101604
4-SF101605
4-SF121603
4-SF121603A
4-SF121604
4-SF121605
4-SF121606
4-SF121608
4-SF121610
4-SF121806
4-SF121810
4-SF122004
4-SF122006
4-SF122008
4-SF122010
4-SF122404
13
L
Length
A
Flange Dia.
B
Flange Width
1/4
3/8
1/8
1/4
3/8
1/4
3/8
1/2
5/8
3/4
3/8
3/8
3/4
3/8
1/2
5/8
3/8
13/32
1/2
5/8
3/4
1
1-1/4
3/4
1-1/4
1/2
3/4
1
1-1/4
1/2
3/8
3/8
3/8
3/8
3/8
1/2
1/2
1/2
1/2
1/2
1/2
5/8
5/8
11/16
11/16
11/16
11/16
11/16
11/16
11/16
11/16
11/16
11/16
3/4
3/4
7/8
7/8
7/8
7/8
1
3/64
3/64
3/64
3/64
3/64
3/64
3/64
3/64
3/64
3/64
3/64
3/32
3/32
3/32
3/32
3/32
3/32
3/32
3/32
3/32
3/32
3/32
3/32
1/8
1/8
1/8
1/8
1/8
1/8
1/8
.005
.005
.0025
14
15
16
O.D.
5-44

S SERIES
MATERIAL:
Inch
T
1
A I.D.
O.D.
INCH COMPONENT
I.D.
O.D.
Catalog Number
+.000
-.001
+.000
-.001
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
.439
.439
.502
.502
.502
.502
.502
.502
.502
.502
.502
.502
.502
.502
.502
.502
.502
.502
.502
.565
.626
.626
.626
.626
.626
.627
.627
.627
.627
.627
.627
.628
.628
.628
.628
.628
.628
.628
.628
.628
.628
.690
.690
.753
.753
.753
.753
.753
.753
.753
.753
.753
.753
.753
.753
.753
.815
.815
.815
.815
.815
.815
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
4-SF142005
4-SF142010
4-SF162003
4-SF162004
4-SF162005
4-SF162006
4-SF162008
4-SF162010
4-SF162012
4-SF162014
4-SF162204
4-SF162206
4-SF162404
4-SF162405
4-SF162406
4-SF162407
4-SF162408
4-SF162410
4-SF162412
4-SF172408
4-SF202404
4-SF202405
4-SF202406
4-SF202408
4-SF202410
4-SF202606
4-SF202608
4-SF202610
4-SF202611A
4-SF202612
4-SF202616
* Length tolerance: .0075.
L
Length
A
Flange Dia.
B
Flange Width
5/8
1-1/4
3/8
1/2
5/8
3/4
1
1-1/4
1-1/2
* 1-3/4
1/2
3/4
1/2
5/8
3/4
7/8
1
1-1/4
1-1/2
1
1/2
5/8
3/4
1
1-1/4
3/4
1
1-1/4
1-7/16
1-1/2
*2
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
15/16
15/16
1
1
1
1
1
1
1
1
1
1
1
1
1
1-1/16
1-1/16
1-1/16
1-1/16
1-1/16
1-1/16
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
5/32
5/32
5/32
5/32
5/32
5/32
.005
.005
.0025

4
5
6
7
8
9
10
11
12
13
14
15
5-45
16

S SERIES
MATERIAL:
Inch
1
L
A I.D.
3
4
INCH COMPONENT
Catalog Number
5
6
7
8
9
10
11
12
13
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
4-SF202806
4-SF202808
4-SF202814
4-SF242806
4-SF242808
4-SF243008
4-SF243012
4-SF243205
4-SF243206
4-SF243208
4-SF243210
4-SF243212
4-SF243216
4-SF283206
4-SF283208
4-SF283210
4-SF283608
4-SF283612
4-SF324006
4-SF324008
4-SF324010
4-SF324012
4-SF324016
4-SF324408
4-SF324414
4-SF404808
4-SF404810
4-SF485612
I.D.
O.D.
+.000
-.001
+.000
-.001
.627
.627
.627
.752
.752
.752
.752
.752
.752
.752
.752
.752
.752
.877
.877
.877
.877
.877
1.002
1.002
1.002
1.002
1.002
1.002
1.002
1.252
1.252
1.503
.878
.878
.878
.878
.878
.940
.940
1.003
1.003
1.003
1.003
1.003
1.003
1.003
1.003
1.003
1.128
1.128
1.253
1.253
1.253
1.253
1.253
1.378
1.378
1.503
1.503
1.754
O.D. tolerance: +.000 / -.0015.

* Length tolerance: .0075.
Flange diameter tolerance: up to & including 1-1/4" is .005,
over 1-1/4" is .010.
14
15
16
O.D.
5-46
L
Length
.005
3/4
1
* 1-3/4
3/4
1
1
1-1/2
5/8
3/4
1
1-1/4
1-1/2
*2
3/4
1
1-1/4
1
1-1/2
3/4
1
1-1/4
1-1/2
2
1
* 1-3/4
1
1-1/4
1-1/2
A
Flange
Diameter
B
Flange Width
1-1/8
1-1/8
1-1/8
1-1/8
1-1/8
1-3/16
1-3/16
1-1/4
1-1/4
1-1/4
1-1/4
1-1/4
1-1/4
1-1/4
1-1/4
1-1/4
1-3/8
1-3/8
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-5/8
1-5/8
1-3/4
1-3/4
2-1/16
5/32
5/32
5/32
5/32
5/32
5/32
5/32
5/32
5/32
5/32
5/32
5/32
5/32
5/32
5/32
5/32
5/32
5/32
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
.0025
SINTERED SOLID BAR STOCK

MATERIAL:
R
Inch
T
1
2
3
O.D.
INCH COMPONENT
Catalog Number
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
4-SSB02
4-SSB03
4-SSB04
4-SSB05
4-SSB06
4-SSB07
4-SSB08
4-SSB09
4-SSB10
4-SSB11
4-SSB12
4-SSB13
4-SSB14
4-SSB16
4-SSB18
4-SSB20
4-SSB22
4-SSB24
4-SSB26
4-SSB28
4-SSB32
4-SSB36
4-SSB40
4-SSB44
4-SSB48
O.D.
Ref.*
L
Length Inch
Ref.*
1/4
3/8
1/2
5/8
3/4
7/8
1
1-1/8
1-1/4
1-3/8
1-1/2
1-5/8
1-3/4
2
2-1/4
2-1/2
2-3/4
3
3-1/4
3-1/2
4
4-1/2
5
5-1/2
6
2
3
6-1/2
6-1/2
6-1/2
6-1/2
6-1/2
6-1/2
6-1/2
6-1/2
6-1/2
6-1/2
6-1/2
6-1/2
6-1/2
6-1/2
6-1/2
6-1/2
6-1/2
6-1/2
6-1/2
6-1/2
6-1/2
6-1/2
6-1/2
4
5
6
7
8
9
10
11
* All bars are supplied oversized so they can be machine finished to dimensions shown.
12
13
14
15
5-47
16
SINTERED CORED BAR STOCK

MATERIAL:
Inch
T
1
2
6-1/2
3
4
O.D.
INCH COMPONENT
Catalog Number
5
6
7
8
9
10
11
12
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
4-SCB0408
4-SCB0412
4-SCB0508
4-SCB0509
4-SCB0511
4-SCB0512
4-SCB0514
4-SCB0516
4-SCB0612
4-SCB0616
4-SCB0711
4-SCB0712
4-SCB0716
4-SCB0816
4-SCB0824
4-SCB0832
4-SCB1016
4-SCB1024
4-SCB1032
4-SCB1116
4-SCB1216
4-SCB1220
4-SCB1420
4-SCB1422
4-SCB1424
4-SCB1622
I.D.*
O.D.*
1/2
1/2
5/8
5/8
5/8
5/8
5/8
5/8
3/4
3/4
7/8
7/8
7/8
1
1
1
1-1/4
1-1/4
1-1/4
1-3/8
1-1/2
1-1/2
1-3/4
1-3/4
1-3/4
2
1
1-1/2
1
1-1/8
1-3/8
1-1/2
1-3/4
2
1-1/2
2
1-3/8
1-1/2
2
2
3
4
2
3
4
2
2
2-1/2
2-1/2
2-3/4
3
2-3/4
* All bars are supplied with oversized O.D.'s and undersized bores so
they can be machine finished to dimensions shown.
13
14
15
16
I.D.
5-48
NONMETALLIC BEARINGS
FEATURES:
Extremely low wear rate.

High performance rating (PV) among sleeve
bearing materials.
Bearing O.D.s compatible with standard sintered
bronze sizes for upgrading existing equipment.
Dynamic coefficient of friction varies, dependent
upon customers loads.
Extremely low coefficient of friction.
Inexpensive.
R
Inch
BEARING DESIGN CALCULATIONS FOR LOADS & SPEED
The load carrying capability of sleeve bearings is expressed by a PV factor in the following formula:
dn
PV = W x
=
12
Ld
P
V
W
L
d
n
=
=
=
=
=
=
Wn
=
12L
.262 Wn
L
2
3
load in psi on the bearing area

shaft surface velocity, ft./min.
bearing load, lbf
bearing length, in.
bearing I.D., in.
shaft speed (rpm)
4
5
COEFFICIENT OF FRICTION AND LIMITING PV DATA:

Material
Ertalyte TX
Acetron NS
Delrin 500AF
Delrin 500CL
Delrin 500
T500 *
G300*
M250*
L280*
J*
Dynamic Coefficient
of Friction
(Dry against steel)
Limiting
PV
(psi x ft./min.)
.19
.20
.16
.20
.39
.09 .27
.08 .15
.1 .3
.08 .23
.06 .18
6000
8750
5025
3015
3015
37700
12000
3400
6600
9700
7
8
9
* These materials are a registered trademark of Igus, Inc.
10
11
12
13
14
15
5-49
16
I
R
NONMETALLIC SLEEVE AND FLANGED BEARINGS

MACHINED
SELF-LUBRICATING
Inch
MATERIAL:
Ertalyte TX Polyester
COLOR:
Gray
+32F to +210F
2
3
7
8
9
10
11
12

A 7P 6-P0408E
A 7P 6-P0412E
A 7P 6-P0608E
A 7P 6-P0612E
A 7P 6-P0808E
A 7P 6-P0812E
A 7P 6-P0816E
A 7P 6-P1012E
A 7P 6-P1016E
A 7P 6-P1212E
A 7P 6-P1216E
A 7P 6-P1616E
A 7P 6-P1624E
A 7P 6-F0608E
A 7P 6-F0612E
A 7P 6-F0812E
A 7P 6-F0816E
A 7P 6-F1012E
A 7P 6-F1016E
A 7P 6-F1212E
A 7P 6-F1216E
A 7P 6-F1616E
A 7P 6-F1624E
13
14
15
16
Fig. 1
INCH COMPONENT
Catalog Number
I.D.
O.D.
4
5
5-50
I.D.
I.D. O.D.
Fig. 2
L
Length
A
Flange Dia.
B
Flange Width
.252
.252
.315
.315
.377
.377
.377
.503
.503
.503
.503
.753
.753
1/4
3/8
1/4
3/8
1/4
3/8
1/2
3/8
1/2
3/8
1/2
1/2
3/4
.315
.315
.377
.377
.440
.440
.503
.503
.753
.753
1/4
3/8
3/8
1/2
3/8
1/2
3/8
1/2
1/2
3/4
7/16
7/16
1/2
1/2
9/16
9/16
5/8
5/8
1
1
1/16
1/16
1/16
1/16
1/16
1/16
1/16
1/16
3/32
3/32
O.D.
+.0015
-.0000
+.002
-.000
.128
.128
.190
.190
.253
.253
.253
.316
.316
.379
.379
.504
.504
.190
.190
.253
.253
.316
.316
.379
.379
.504
.504
.005
.005
.003
NONMETALLIC SLEEVE AND FLANGED BEARINGS

MACHINED
SELF-LUBRICATING
R
Inch
MATERIAL:
AcetronTM Acetal
Intermittent: up to 250F
T
1
2
I.D.
O.D.
Catalog Number *
A 7P 6-P0608
A 7P 6-P1616
A 7P 6-F1616
I.D.
O.D.
3
I.D. O.D.
Fig. 1
INCH COMPONENT
Fig. 2
L
Length
A
Flange Dia.
B
Flange Width
+.0015
-.0000
+.002
-.000
.190
.504
.315
.753
1/4
1/2
.504
.753
1/2
3/32
.005
.005
.003
* To be discontinued when present material is depleted.

A new material will be offered in its place - Ertalyte TX Polyester.
5
6
7
8
9
10
11
12
13
14
15
5-51
16
I
R
SLEEVE BEARINGS GENERAL PURPOSE POLYMER

MAINTENANCE-FREE
HIGH WEAR RESISTANCE
ABOVE AVERAGE LOADS
DRY RUNNING
Inch
MATERIAL:
G300
Polymer
-40F to +266F
For additional information concerning the
bearing material, see page 5-55.
30
f
O.D.
I.D.
30
f
5
6
7
8
9
10
11
12
13
14
INCH COMPONENT
Catalog Number
S99GGP-020304
S99GGP-030406
S99GGP-040504
S99GGP-040506
S99GGP-040508
S99GGP-040512
S99GGP-060704
S99GGP-060708
S99GGP-060808
S99GGP-060812
S99GGP-080904
S99GGP-080908
S99GGP-080916
S99GGP-081008
S99GGP-081012
S99GGP-101108
S99GGP-101112
S99GGP-101116
S99GGP-101208
S99GGP-101216
S99GGP-121408
S99GGP-121412
S99GGP-121416
S99GGP-121424
S99GGP-141612
S99GGP-141616
S99GGP-161808
S99GGP-161812
S99GGP-161816
S99GGP-161824
15
16
5-52
I.D.
1/8
3/16
1/4
1/4
1/4
1/4
3/8
3/8
3/8
3/8
1/2
1/2
1/2
1/2
1/2
5/8
5/8
5/8
5/8
5/8
3/4
3/4
3/4
3/4
7/8
7/8
1
1
1
1
O.D.
3/16
1/4
5/16
5/16
5/16
5/16
15/32
15/32
1/2
1/2
19/32
19/32
19/32
5/8
5/8
23/32
23/32
23/32
3/4
3/4
7/8
7/8
7/8
7/8
1
1
1-1/8
1-1/8
1-1/8
1-1/8
L
1/4
3/8
1/4
3/8
1/2
3/4
1/4
1/2
1/2
3/4
1/4
1/2
1
1/2
3/4
1/2
3/4
1
1/2
1
1/2
3/4
1
1-1/2
3/4
1
1/2
3/4
1
1-1/2
I.D. After
Pressfit
Max.
.1269
.1892
.2521
.2521
.2521
.2521
.3773
.3773
.3783
.3783
.5030
.5030
.5030
.5040
.5040
.6280
.6280
.6280
.6290
.6290
.7541
.7541
.7541
.7541
.8791
.8791
1.0041
1.0041
1.0041
1.0041
Min.
.1251
.1873
.2498
.2498
.2498
.2498
.3750
.3750
.3760
.3760
.5003
.5003
.5003
.5013
.5013
.6253
.6253
.6253
.6263
.6263
.7507
.7507
.7507
.7507
.8757
.8757
1.0007
1.0007
1.0007
1.0007
Housing
Bore
Max.
.1878
.2503
.3128
.3128
.3128
.3128
.4691
.4691
.5015
.5015
.5941
.5941
.5941
.6260
.6260
.7192
.7192
.7192
.7510
.7510
.8755
.8755
.8755
.8755
1.0005
1.0005
1.1255
1.1255
1.1255
1.1255
Min.
.1873
.2497
.3122
.3122
.3122
.3122
.4684
.4684
.5010
.5010
.5934
.5934
.5934
.6250
.6250
.7184
.7184
.7184
.7500
.7500
.8747
.8747
.8747
.8747
.9997
.9997
1.1247
1.1247
1.1247
1.1247
Shaft Size
Max.
.1243
.1865
.2490
.2490
.2490
.2490
.3740
.3740
.3750
.3750
.4990
.4990
.4990
.5000
.5000
.6240
.6240
.6240
.6250
.6250
.7491
.7491
.7491
.7491
.8741
.8741
.9991
.9991
.9991
.9991
Min.
.1236
.1858
.2481
.2481
.2481
.2481
.3731
.3731
.3741
.3741
.4980
.4980
.4980
.4990
.4990
.6230
.6230
.6230
.6240
.6240
.7479
.7479
.7479
.7479
.8729
.8729
.9979
.9979
.9979
.9979
f
.019
.019
.019
.019
.019
.019
.019
.019
.019
.019
.031
.031
.031
.031
.031
.031
.031
.031
.031
.031
.031
.031
.031
.031
.031
.031
.031
.031
.031
.031
FLANGED BEARINGS GENERAL PURPOSE POLYMER

MAINTENANCE-FREE
ABOVE AVERAGE LOADS
DRY-RUNNING
R
Inch
MATERIAL:

G300
Polymer
-40F to +266F
2
O.D. I.D.
30
4
B
INCH COMPONENT
Catalog Number
I.D.
O.D.
A
Dia.
S99GGF-020304
S99GGF-030406
S99GGF-040504
S99GGF-040506
S99GGF-040508
S99GGF-040512
S99GGF-060704
S99GGF-060706
S99GGF-060708
S99GGF-080904
S99GGF-080906
S99GGF-080908
S99GGF-080916
1/8
3/16
1/4
1/4
1/4
1/4
3/8
3/8
3/8
1/2
1/2
1/2
1/2
3/16
1/4
5/16
5/16
5/16
5/16
15/32
15/32
15/32
19/32
19/32
19/32
19/32
1/4
3/8
1/4
3/8
1/2
3/4
1/4
3/8
1/2
1/4
3/8
1/2
1
.312
.375
.500
.500
.500
.500
.687
.687
.687
.875
.875
.875
.875
.032
.032
.032
.032
.032
.032
.046
.046
.046
.046
.046
.046
.046
Catalog Number
(Ref.)
S99GGF-020304
S99GGF-030406
S99GGF-040504
S99GGF-040506
S99GGF-040508
S99GGF-040512
S99GGF-060704
S99GGF-060706
S99GGF-060708
S99GGF-080904
S99GGF-080906
S99GGF-080908
S99GGF-080916
Housing Bore
Max.
.1878
.2503
.3128
.3128
.3128
.3128
.4691
.4691
.4691
.5941
.5941
.5941
.5941
Min.
.1873
.2497
.3122
.3122
.3122
.3122
.4684
.4684
.4684
.5934
.5934
.5934
.5934
I.D. After
Press Fit
Shaft Size
Max.
.1243
.1865
.2490
.2490
.2490
.2490
.3740
.3740
.3740
.4990
.4990
.4990
.4990
Max.
Min.
.1269
.1892
.2521
.2521
.2521
.2521
.3773
.3773
.3773
.5030
.5030
.5030
.5030
.1251
.1873
.2498
.2498
.2498
.2498
.3750
.3750
.3750
.5003
.5003
.5003
.5003
f
Min.
.1236
.1858
.2481
.2481
.2481
.2481
.3731
.3731
.3731
.4980
.4980
.4980
.4980
.019
.019
.019
.019
.019
.019
.019
.019
.019
.031
.031
.031
.031
5-53
6
7
8
9
10
11
12
13
14
15
16
I
R
FLANGED BEARINGS GENERAL PURPOSE POLYMER

MAINTENANCE-FREE
ABOVE AVERAGE LOADS
DRY-RUNNING
MATERIAL:
G300
Inch
Polymer
-40F to +266F
O.D. I.D.
30
5
6
INCH COMPONENT
Catalog Number
I.D.
O.D.
A
Dia.
10
S99GGF-101108
S99GGF-101112
S99GGF-101116
S99GGF-121408
S99GGF-121412
S99GGF-121416
S99GGF-121424
S99GGF-141612
S99GGF-141616
S99GGF-161808
S99GGF-161812
S99GGF-161816
S99GGF-161824
5/8
5/8
5/8
3/4
3/4
3/4
3/4
7/8
7/8
1
1
1
1
23/32
23/32
23/32
7/8
7/8
7/8
7/8
1
1
1-1/8
1-1/8
1-1/8
1-1/8
1/2
3/4
1
1/2
3/4
1
1-1/2
3/4
1
1/2
3/4
1
1-1/2
.937
.937
.937
1.125
1.125
1.125
1.125
1.250
1.250
1.375
1.375
1.375
1.375
.046
.046
.046
.062
.062
.062
.062
.062
.062
.062
.062
.062
.062
11
Catalog Number
(Ref.)
7
8
9
12
13
14
S99GGF-101108
S99GGF-101112
S99GGF-101116
S99GGF-121408
S99GGF-121412
S99GGF-121416
S99GGF-121424
S99GGF-141612
S99GGF-141616
S99GGF-161808
S99GGF-161812
S99GGF-161816
S99GGF-161824
15
16
Housing Bore
Max.
.7192
.7192
.7192
.8755
.8755
.8755
.8755
1.0005
1.0005
1.1255
1.1255
1.1255
1.1255
Min.
.7184
.7184
.7184
.8747
.8747
.8747
.8747
.9997
.9997
1.1247
1.1247
1.1247
1.1247
I.D. After
Press Fit
Shaft Size
Max.
.6240
.6240
.6240
.7491
.7491
.7491
.7491
.8741
.8741
.9991
.9991
.9991
.9991
Max.
Min.
.6280
.6280
.6280
.7541
.7541
.7541
.7541
.8791
.8791
1.0041
1.0041
1.0041
1.0041
.6253
.6253
.6253
.7507
.7507
.7507
.7507
.8757
.8757
1.0007
1.0007
1.0007
1.0007
f
Min.
.6230
.6230
.6230
.7479
.7479
.7479
.7479
.8729
.8729
.9979
.9979
.9979
.9979
.031
.031
.031
.031
.031
.031
.031
.031
.031
.031
.031
.031
.031
5-54
GENERAL PURPOSE POLYMER

G300 POLYMER
.5
Inch
.4
.3
.2
.1
2
9.84
19.69
29.53
39.37
49.22
59.06
68.90
Surface Speed (fpm)

Graph 1: Coefficient of friction
of G300 as a result of the running
speed; p = 108 psi
.35
.30
.25
.20
.15
.10
.05
.00
1450
2900
4350
5800
7250
8700
10150 11600
Load (psi)
Graph 2: Coefficient of friction of G300
as a result of the load; v = 1.97 fpm
14500
10
1450
Load (psi)
11
12
145
13
15
14
1.97
19.69
197
1969
Surface Speed (fpm)

Graph 3: Permissible p x v - values for G300 running dry against a steel shaft, at 68F.
5-55
15
16
I
R
T
SLEEVE BEARINGS HIGH-TEMPERATURE POLYMER

HIGH COMPRESSIVE STRENGTH
VERY LOW MOISTURE ABSORPTION
UNIVERSAL RESISTANCE TO CHEMICALS
Inch
MATERIAL:
T500 Polymer
1
2
-148F to +482F
30
f
O.D.
I.D.
3
30
f
L
5
6
7
8
9
10
11
12
13
INCH COMPONENT
Catalog Number
S99GTP-020303
S99GTP-020306
S99GTP-030404
S99GTP-030406
S99GTP-040504
S99GTP-040506
S99GTP-040508
S99GTP-060704
S99GTP-060706
S99GTP-060708
S99GTP-080904
S99GTP-080906
S99GTP-080908
S99GTP-080912
S99GTP-080916
S99GTP-101104
S99GTP-101106
S99GTP-101108
S99GTP-101112
S99GTP-101116
S99GTP-121408
S99GTP-121412
S99GTP-121416
S99GTP-141612
S99GTP-141616
S99GTP-161808
S99GTP-161812
S99GTP-161816
S99GTP-161824
14
15
16
5-56
I.D.
1/8
1/8
3/16
3/16
1/4
1/4
1/4
3/8
3/8
3/8
1/2
1/2
1/2
1/2
1/2
5/8
5/8
5/8
5/8
5/8
3/4
3/4
3/4
7/8
7/8
1
1
1
1
O.D.
3/16
3/16
1/4
1/4
5/16
5/16
5/16
15/32
15/32
15/32
19/32
19/32
19/32
19/32
19/32
23/32
23/32
23/32
23/32
23/32
7/8
7/8
7/8
1
1
1-1/8
1-1/8
1-1/8
1-1/8
L
3/16
3/8
1/4
3/8
1/4
3/8
1/2
1/4
3/8
1/2
1/4
3/8
1/2
3/4
1
1/4
3/8
1/2
3/4
1
1/2
3/4
1
3/4
1
1/2
3/4
1
1-1/2
I.D. After
Pressfit
Max.
.1269
.1269
.1892
.1892
.2521
.2521
.2521
.3773
.3773
.3773
.5030
.5030
.5030
.5030
.5030
.6280
.6280
.6280
.6280
.6280
.7541
.7541
.7541
.8791
.8791
1.0041
1.0041
1.0041
1.0041
Min.
.1251
.1251
.1873
.1873
.2498
.2498
.2498
.3750
.3750
.3750
.5003
.5003
.5003
.5003
.5003
.6253
.6253
.6253
.6253
.6253
.7507
.7507
.7507
.8757
.8757
1.0007
1.0007
1.0007
1.0007
Housing
Bore
Max.
.1878
.1878
.2503
.2503
.3128
.3128
.3128
.4691
.4691
.4691
.5941
.5941
.5941
.5941
.5941
.7192
.7192
.7192
.7192
.7192
.8755
.8755
.8755
1.0005
1.0005
1.1255
1.1255
1.1255
1.1255
Min.
.1873
.1873
.2497
.2497
.3122
.3122
.3122
.4684
.4684
.4684
.5934
.5934
.5934
.5934
.5934
.7184
.7184
.7184
.7184
.7184
.8747
.8747
.8747
.9997
.9997
1.1247
1.1247
1.1247
1.1247
Shaft Size
Max.
.1243
.1243
.1865
.1865
.2490
.2490
.2490
.3740
.3740
.3750
.4990
.4990
.4990
.4990
.4990
.6240
.6240
.6240
.6240
.6240
.7491
.7491
.7491
.8741
.8741
.9991
.9991
.9991
.9991
Min.
.1236
.1236
.1858
.1858
.2481
.2481
.2481
.3731
.3731
.3741
.4980
.4980
.4980
.4980
.4980
.6230
.6230
.6230
.6230
.6230
.7479
.7479
.7479
.8729
.8729
.9979
.9979
.9979
.9979
f
.019
.019
.019
.019
.019
.019
.019
.019
.019
.019
.031
.031
.031
.031
.031
.031
.031
.031
.031
.031
.031
.031
.031
.031
.031
.031
.031
.031
.031
FLANGED BEARINGS HIGH-TEMPERATURE POLYMER

R
Inch
MATERIAL:
T500 Polymer
-148F to +482F

2
O.D. I.D.
3
30
4
B
f
L
INCH COMPONENT
Catalog Number
I.D.
O.D.
A
Dia.
S99GTF-020303
S99GTF-020306
S99GTF-030404
S99GTF-030406
S99GTF-040504
S99GTF-040506
S99GTF-040508
S99GTF-040512
S99GTF-060704
S99GTF-060706
S99GTF-060708
S99GTF-080904
S99GTF-080906
S99GTF-080908
S99GTF-080916
1/8
1/8
3/16
3/16
1/4
1/4
1/4
1/4
3/8
3/8
3/8
1/2
1/2
1/2
1/2
3/16
3/16
1/4
1/4
5/16
5/16
5/16
5/16
15/32
15/32
15/32
19/32
19/32
19/32
19/32
3/16
3/8
1/4
3/8
1/4
3/8
1/2
3/4
1/4
3/8
1/2
1/4
3/8
1/2
1
.312
.312
.375
.375
.500
.500
.500
.500
.687
.687
.687
.875
.875
.875
.875
.032
.032
.032
.032
.032
.032
.032
.032
.046
.046
.046
.046
.046
.046
.046
Catalog Number
(Ref.)
S99GTF-020303
S99GTF-020306
S99GTF-030404
S99GTF-030406
S99GTF-040504
S99GTF-040506
S99GTF-040508
S99GTF-040512
S99GTF-060704
S99GTF-060706
S99GTF-060708
S99GTF-080904
S99GTF-080906
S99GTF-080908
S99GTF-080916
Housing Bore
Max.
.1878
.1878
.2503
.2503
.3128
.3128
.3128
.3128
.4691
.4691
.4691
.5941
.5941
.5941
.5941
Min.
.1873
.1873
.2497
.2497
.3122
.3122
.3122
.3122
.4684
.4684
.4684
.5934
.5934
.5934
.5934
I.D. After
Pressfit
Shaft Size
Max.
.1243
.1243
.1865
.1865
.2490
.2490
.2490
.2490
.3740
.3740
.3740
.4990
.4990
.4990
.4990
Max.
Min.
.1269
.1269
.1892
.1892
.2521
.2521
.2521
.2521
.3773
.3773
.3773
.5030
.5030
.5030
.5030
.1251
.1251
.1873
.1873
.2498
.2498
.2498
.2498
.3750
.3750
.3750
.5003
.5003
.5003
.5003
f
Min.
.1236
.1236
.1858
.1858
.2481
.2481
.2481
.2481
.3731
.3731
.3731
.4980
.4980
.4980
.4980
.019
.019
.019
.019
.019
.019
.019
.019
.019
.019
.019
.031
.031
.031
.031
6
7
8
9
10
11
12
13
14
15
5-57
16
I
R
T
FLANGED BEARINGS HIGH-TEMPERATURE POLYMER

Inch
MATERIAL:
T500 Polymer
1
2
-148F to +482F
O.D. I.D.
30
INCH COMPONENT
Catalog Number
I.D.
O.D.
A
Dia.
10
S99GTF-101108
S99GTF-101112
S99GTF-101116
S99GTF-121408
S99GTF-121412
S99GTF-121416
S99GTF-121424
S99GTF-141612
S99GTF-141616
S99GTF-161808
S99GTF-161812
S99GTF-161816
S99GTF-161824
5/8
5/8
5/8
3/4
3/4
3/4
3/4
7/8
7/8
1
1
1
1
23/32
23/32
23/32
7/8
7/8
7/8
7/8
1
1
1-1/8
1-1/8
1-1/8
1-1/8
1/2
3/4
1
1/2
3/4
1
1-1/2
3/4
1
1/2
3/4
1
1-1/2
.937
.937
.937
1.125
1.125
1.125
1.125
1.250
1.250
1.375
1.375
1.375
1.375
.046
.046
.046
.062
.062
.062
.062
.062
.062
.062
.062
.062
.062
11
Catalog Number
(Ref.)
7
8
9
12
13
14
S99GTF-101108
S99GTF-101112
S99GTF-101116
S99GTF-121408
S99GTF-121412
S99GTF-121416
S99GTF-121424
S99GTF-141612
S99GTF-141616
S99GTF-161808
S99GTF-161812
S99GTF-161816
S99GTF-161824
15
16
Housing Bore
Max.
.7192
.7192
.7192
.8755
.8755
.8755
.8755
1.0005
1.0005
1.1255
1.1255
1.1255
1.1255
Min.
.7184
.7184
.7184
.8747
.8747
.8747
.8747
.9997
.9997
1.1247
1.1247
1.1247
1.1247
I.D. After
Pressfit
Shaft Size
Max.
.6240
.6240
.6240
.7491
.7491
.7491
.7491
.8741
.8741
.9991
.9991
.9991
.9991
Max.
Min.
.6280
.6280
.6280
.7541
.7541
.7541
.7541
.8791
.8791
1.0041
1.0041
1.0041
1.0041
.6253
.6253
.6253
.7507
.7507
.7507
.7507
.8757
.8757
1.0007
1.0007
1.0007
1.0007
f
Min.
.6230
.6230
.6230
.7479
.7479
.7479
.7479
.8729
.8729
.9979
.9979
.9979
.9979
.031
.031
.031
.031
.031
.031
.031
.031
.031
.031
.031
.031
.031
5-58
HIGH-TEMPERATURE POLYMER
T500 POLYMER
.4
Inch
.3
.2
.1
9.84
68.90
Surface Speed (fpm)

Graph 1: Coefficient of friction of T500 as a result of the
surface speed; p = 108 psi, shaft Cold Rolled Steel
19.69
29.53
39.37
49.22
59.05
.35
.30
.25
.20
.15
.10
.05
.00
1450 2900 4350 5800 7250 8700 10150 11600 13050

Load (psi)
Graph 2: Coefficient of friction for T500
145000
9
10
Load (psi)
14500
11
1450
12
145
15
.197
13
1.97
19.69
197
1969
Surface Speed (fpm)

Graph 3: Permissible p x v value for T500 running dry against a steel shaft, at 68F
14
15
5-59
16
I
R
SLEEVE BEARINGS INDUSTRIAL GRADE POLYMER

EXCELLENT VIBRATION DAMPENING
HIGH IMPACT RESISTANCE
ALLOWS DIRT PENETRATION FOR
SHAFT PROTECTION
MATERIAL:
Inch
M250
Polymer
-40F to +176F
30

f
O.D.
I.D.
3
30
f
L
INCH COMPONENT
5
6
7
8
9
10
11
12
13
14
Catalog Number
S99GHP-020304
S99GHP-020404
S99GHP-030404
S99GHP-030406
S99GHP-030504
S99GHP-030506
S99GHP-040506
S99GHP-040508
S99GHP-040604
S99GHP-040606
S99GHP-040608
S99GHP-060806
S99GHP-060808
S99GHP-060812
S99GHP-081004
S99GHP-081006
S99GHP-081008
S99GHP-081012
S99GHP-081016
S99GHP-101208
S99GHP-101216
S99GHP-101312
S99GHP-101316
S99GHP-121412
S99GHP-121416
S99GHP-121424
S99GHP-141612
S99GHP-141616
S99GHP-161812
S99GHP-161816
S99GHP-161824
15
16
5-60
I.D.
1/8
1/8
3/16
3/16
3/16
3/16
1/4
1/4
1/4
1/4
1/4
3/8
3/8
3/8
1/2
1/2
1/2
1/2
1/2
5/8
5/8
5/8
5/8
3/4
3/4
3/4
7/8
7/8
1
1
1
O.D.
3/16
1/4
1/4
1/4
5/16
5/16
5/16
5/16
3/8
3/8
3/8
1/2
1/2
1/2
5/8
5/8
5/8
5/8
5/8
3/4
3/4
13/16
13/16
7/8
7/8
7/8
1
1
1-1/8
1-1/8
1-1/8
L
1/4
1/4
1/4
3/8
1/4
3/8
3/8
1/2
1/4
3/8
1/2
3/8
1/2
3/4
1/4
3/8
1/2
3/4
1
1/2
1
3/4
1
3/4
1
1-1/2
3/4
1
3/4
1
1-1/2
I.D. After
Pressfit
Housing
Bore
Shaft
Size
Max.
Min.
Max.
Min.
Max.
Min.
.1280
.1280
.1905
.1905
.1905
.1905
.2539
.2539
.2539
.2539
.2539
.3789
.3789
.3789
.5047
.5047
.5047
.5047
.5047
.6297
.6297
.6297
.6297
.7559
.7559
.7559
.8809
.8809
1.0059
1.0059
1.0059
.1262
.1262
.1887
.1887
.1887
.1887
.2516
.2516
.2516
.2516
.2516
.3766
.3766
.3766
.5020
.5020
.5020
.5020
.5020
.6270
.6270
.6270
.6270
.7525
.7525
.7525
.8775
.8775
1.0025
1.0025
1.0025
.1880
.1880
.2515
.2515
.3140
.3140
.3140
.3140
.3765
.3765
.3765
.5015
.5015
.5015
.6260
.6260
.6260
.6260
.6260
.7510
.7510
.8135
.8135
.8760
.8760
.8760
1.0010
1.0010
1.1260
1.1260
1.1260
.1875
.1875
.2510
.2510
.3135
.3135
.3135
.3135
.3760
.3760
.3760
.5010
.5010
.5010
.6250
.6250
.6250
.6250
.6250
.7500
.7500
.8125
.8125
.8750
.8750
.8750
1.0000
1.0000
1.1250
1.1250
1.1250
.1250
.1250
.1875
.1875
.1875
.1875
.2500
.2500
.2500
.2500
.2500
.3750
.3750
.3750
.5000
.5000
.5000
.5000
.5000
.6250
.6250
.6250
.6250
.7500
.7500
.7500
.8750
.8750
1.0000
1.0000
1.0000
.1241
.1241
.1866
.1866
.1866
.1866
.2491
.2491
.2491
.2491
.2491
.3741
.3741
.3741
.4990
.4990
.4990
.4990
.4990
.6240
.6240
.6240
.6240
.7490
.7490
.7490
.8740
.8740
.9990
.9990
.9990
f
.019
.019
.019
.019
.019
.019
.019
.019
.019
.019
.019
.019
.019
.019
.031
.031
.031
.031
.031
.031
.031
.031
.031
.031
.031
.031
.031
.031
.031
.031
.031
FLANGED BEARINGS INDUSTRIAL GRADE POLYMER

ALLOWS DIRT PENETRATION FOR SHAFT PROTECTION
Inch
MATERIAL:
0
1
M250 Polymer
R
T
-40F to +176F

2
O.D. I.D.
3
30
INCH COMPONENT
Catalog Number
I.D.
O.D.
A
Dia.
S99GHF-020304
S99GHF-020404
S99GHF-030404
S99GHF-030406
S99GHF-030504
S99GHF-030506
S99GHF-040506
S99GHF-040508
S99GHF-040604
S99GHF-040606
S99GHF-040608
S99GHF-060806
S99GHF-060808
S99GHF-060812
S99GHF-081004
S99GHF-081006
1/8
1/8
3/16
3/16
3/16
3/16
1/4
1/4
1/4
1/4
1/4
3/8
3/8
3/8
1/2
1/2
3/16
1/4
1/4
1/4
5/16
5/16
5/16
5/16
3/8
3/8
3/8
1/2
1/2
1/2
5/8
5/8
1/4
1/4
1/4
3/8
1/4
3/8
3/8
1/2
1/4
3/8
1/2
3/8
1/2
3/4
1/4
3/8
.3125
.360
.375
.375
.370
.370
.4375
.4375
.560
.560
.560
.625
.625
.625
.875
.875
.032
.047
.032
.032
.047
.047
.032
.032
.047
.047
.047
.062
.062
.062
.062
.062
Catalog Number
(Ref.)
S99GHF-020304
S99GHF-020404
S99GHF-030404
S99GHF-030406
S99GHF-030504
S99GHF-030506
S99GHF-040506
S99GHF-040508
S99GHF-040604
S99GHF-040606
S99GHF-040608
S99GHF-060806
S99GHF-060808
S99GHF-060812
S99GHF-081004
S99GHF-081006
Housing Bore
Max.
.1885
.1885
.2515
.2515
.3140
.3140
.3140
.3140
.3765
.3765
.3765
.5015
.5015
.5015
.6260
.6260
Min.
.1880
.1880
.2510
.2510
.3135
.3135
.3135
.3135
.3760
.3760
.3760
.5010
.5010
.5010
.6250
.6250
I.D. After
Pressfit
Shaft Size
Max.
.1250
.1250
.1875
.1875
.1875
.1875
.2500
.2500
.2500
.2500
.2500
.3750
.3750
.3750
.5000
.5000
Max.
Min.
.1280
.1280
.1905
.1905
.1905
.1905
.2539
.2539
.2539
.2539
.2539
.3789
.3789
.3789
.5047
.5047
.1262
.1262
.1887
.1887
.1887
.1887
.2516
.2516
.2516
.2516
.2516
.3766
.3766
.3766
.5020
.5020
5
6
7
8
9
10
f
Min.
.1241
.1241
.1866
.1866
.1866
.1866
.2491
.2491
.2491
.2491
.2491
.3741
.3741
.3741
.4990
.4990
.019
.019
.019
.019
.019
.019
.019
.019
.019
.019
.019
.019
.019
.019
.031
.031
11
12
13
14
15
5-61
16
I
R
T
FLANGED BEARINGS INDUSTRIAL GRADE POLYMER

ALLOWS DIRT PENETRATION FOR SHAFT PROTECTION
Inch
MATERIAL:
0
1
M250 Polymer
1
2
-40F to +176F
O.D. I.D.
3
30
INCH COMPONENT
5
6
7
8
9
10
11
12
13
14
15
16
Catalog Number
I.D.
O.D.
A
Dia.
S99GHF-020304
S99GHF-020404
S99GHF-030404
S99GHF-030406
S99GHF-030504
S99GHF-030506
S99GHF-040506
S99GHF-040508
S99GHF-040604
S99GHF-040606
S99GHF-040608
S99GHF-060806
S99GHF-060808
S99GHF-060812
S99GHF-081004
S99GHF-081006
1/8
1/8
3/16
3/16
3/16
3/16
1/4
1/4
1/4
1/4
1/4
3/8
3/8
3/8
1/2
1/2
3/16
1/4
1/4
1/4
5/16
5/16
5/16
5/16
3/8
3/8
3/8
1/2
1/2
1/2
5/8
5/8
1/4
1/4
1/4
3/8
1/4
3/8
3/8
1/2
1/4
3/8
1/2
3/8
1/2
3/4
1/4
3/8
.3125
.360
.375
.375
.370
.370
.4375
.4375
.560
.560
.560
.625
.625
.625
.875
.875
.032
.047
.032
.032
.047
.047
.032
.032
.047
.047
.047
.062
.062
.062
.062
.062
Catalog Number
(Ref.)
S99GHF-020304
S99GHF-020404
S99GHF-030404
S99GHF-030406
S99GHF-030504
S99GHF-030506
S99GHF-040506
S99GHF-040508
S99GHF-040604
S99GHF-040606
S99GHF-040608
S99GHF-060806
S99GHF-060808
S99GHF-060812
S99GHF-081004
S99GHF-081006
5-62
Housing Bore
Max.
.1885
.1885
.2515
.2515
.3140
.3140
.3140
.3140
.3765
.3765
.3765
.5015
.5015
.5015
.6260
.6260
Min.
.1880
.1880
.2510
.2510
.3135
.3135
.3135
.3135
.3760
.3760
.3760
.5010
.5010
.5010
.6250
.6250
I.D. After
Pressfit
Shaft Size
Max.
.1250
.1250
.1875
.1875
.1875
.1875
.2500
.2500
.2500
.2500
.2500
.3750
.3750
.3750
.5000
.5000
Max.
Min.
.1280
.1280
.1905
.1905
.1905
.1905
.2539
.2539
.2539
.2539
.2539
.3789
.3789
.3789
.5047
.5047
.1262
.1262
.1887
.1887
.1887
.1887
.2516
.2516
.2516
.2516
.2516
.3766
.3766
.3766
.5020
.5020
f
Min.
.1241
.1241
.1866
.1866
.1866
.1866
.2491
.2491
.2491
.2491
.2491
.3741
.3741
.3741
.4990
.4990
.019
.019
.019
.019
.019
.019
.019
.019
.019
.019
.019
.019
.019
.019
.031
.031
CLIP BEARINGS WITH BEVELED EDGES

LOW CLEARANCE
MAINTENANCE-FREE
ECONOMICAL
HIGH PRECISION
R
Inch
MATERIAL:
M250 Polymer
L

Intermittent: +338F
1
2
O.D.
I.D.
3
A
INCH COMPONENT
Catalog Number
I.D.
O.D.
S99GMY-019023188
S99GMY-025030250
S99GMY-031037313
S99GMY-038044375
S99GMY-044050438
S99GMY-050075500
S99GMY-063069625
S99GMY-075113750
S99GMY-088144875
S99GMY-100150875
3/16
1/4
5/16
3/8
7/16
1/2
5/8
3/4
7/8
1
.234
.296
.374
.437
.499
.562
.687
.812
.937
1.093
Recommended
A
B
L
Flange
Length Flange
Dia.
Width
5/16
13/32
1/2
19/32
21/32
3/4
15/16
1-1/8
1-5/16
1-1/2
.039
.039
.039
.039
.039
.059
.059
.059
.059
.059
3/16
1/4
5/16
3/8
7/16
1/2
5/8
3/4
7/8
7/8
.025
.025
.03
.03
.03
.03
.03
.03
.03
.045
Housing Bore
Max.
Min.
.2339
.2268
.2965
.2878
.3744
.3657
.4370
.4264
.4996
.4890
.5618
.5512
.6870
.6724
.8118
.7988
.9370
.9240
1.0933 1.0803
Shaft Size
Max.
Min.
.1875 .1865
.2500 .2490
.3125 .3115
.3750 .3740
.4375 .4365
.5000 .4990
.6250 .6240
.7500 .7490
.8750 .8740
1.0000 .9985
5
6
7
8
9
10
11
12
13
14
15
5-63
16
CLIP BEARINGS DOUBLE FLANGE

FOR USE WITH SHEET METAL PLATES
R
T
MATERIAL:
M250 Polymer

Inch
Intermittent: +338F
1
2
FEATURES:
Easy installation.
Maintenance-free & Self-lubricating.
Smooth operation.
Good wear resistance.
Used for both rotational & linear movements.
Lightweight.

3
4
5
A1 O.D.
.03
.03
I.D.
A2
8
INCH COMPONENT
9
10
11
12
13
Catalog Number
S99GMC-192514
S99GMC-192520
S99GMC-253414
S99GMC-253420
S99GMC-314114
S99GMC-314120
S99GMC-384714
S99GMC-384720
S99GMC-445314
S99GMC-445320
S99GMC-505914
S99GMC-505920
S99GMC-637214
S99GMC-637220
S99GMC-758414
S99GMC-758420
14
15
16
5-64
I.D. O.D.
3/16
3/16
1/4
1/4
5/16
5/16
3/8
3/8
7/16
7/16
1/2
1/2
5/8
5/8
3/4
3/4
.2343
.2343
.3125
.3125
.375
.375
.4375
.4375
.500
.500
.5625
.5625
.6875
.6875
.8125
.8125
Flange
Diameter
A1
A2
1/4
1/4
11/32
11/32
13/32
13/32
15/32
15/32
17/32
17/32
19/32
19/32
23/32
23/32
27/32
27/32
5/16
5/16
7/16
7/16
1/2
1/2
9/16
9/16
5/8
5/8
11/16
11/16
7/8
7/8
1.00
1.00
Recommended
Housing Bore
L
Shaft Size
Length
.138
.200
.138
.200
.138
.200
.138
.200
.138
.200
.138
.200
.138
.200
.138
.200
Max.
Min.
Max.
Min.
.2414
.2414
.3212
.3212
.3834
.3834
.4481
.4481
.5106
.5106
.5731
.5731
.6981
.6981
.8255
.8255
.2343
.2272
.3125
.3038
.3750
.3663
.4375
.4269
.5000
.4894
.5625
.5519
.6875
.6769
.8125
.7995
.1875
.1875
.2500
.2500
.3125
.3125
.3750
.3750
.4375
.4375
.5000
.5000
.6250
.6250
.7500
.7500
.1865
.1865
.2490
.2490
.3115
.3115
.3740
.3740
.4365
.4365
.4990
.4990
.6240
.6240
.7490
.7490
Sheet
Metal
Thickness
.040 .075
.072 .135
.040 .075
.072 .135
.040 .075
.072 .135
.040 .075
.072 .135
.040 .075
.072 .135
.040 .075
.072 .135
.040 .075
.072 .135
.040 .075
.072 .135
INDUSTRIAL GRADE POLYMER

M250 POLYMER
0.7
Inch
0.6
0.5
0.4
0.3
0.2
1.97
19.69
29.53
39.37
49.22
50.05
Surface Speed (fpm)
Graph 1: Coefficient of friction of M250
as a result of the surface speed; p = 108 psi
68.90
0.6
0.5
0.4
0.3
0.2
0.1
0.0
6
0
290
580
870
1160 1450 1740 2030 2320 2610 2900
Load (psi)
Graph 2: Coefficient of friction of M250
7
8
14500
Load (psi)
1450
10
11
145
12
15
1.45
.197
13
14
1.97
19.69
197
Surface Speed (fpm)

Graph 3: Permissible p x v value for M250 running dry against a steel shaft, at 68F
393.70
15
5-65
16
SELECTION CHART PRESSBEARINGS

SELECTION CHART:
R
T

1. Items with page numbers are in this catalog.
For items with shaded background please, see our Metric Master Catalog, D805 or
our Web site: www.sdp-si.com
Inch
2. The part numbers with the - in the 7th character denotes inch size bore and M
in the 7th character signify metric size bore.
1
Bearing Material
Type
Sintered
Bronze
3
4
Press-Fit
Self-Aligning
5
6
7
8
9
Press-Fit
Self-Clinching
Self-Aligning
10
11
13
Pillow
Block-Mounted
Self-Aligning
14
15
16
5-66
Needle Roller Roller Clutch

Bearing
Bearing
A 7Z44(pg. 5-75)
A 7Z47(pg. 5-84)
A 7Z41M
A 7Z44M
A 7Z47M
A 7Z40(pg. 5-67)
A 7Z60(pg. 5-68)
A 7Z43(pg. 5-72)
A 7Z46(pg. 5-82)
A 7Z40M
A 7Z60M
A 7Z43M
A 7Z46M
A 7Z61(pg. 5-70)
A 7Z48(pg. 5-82)
A 7Z61M
A 7Z48M
A 7Z42(pg. 5-76)
A 7Z62(pg. 5-77)
A 7Z45(pg. 5-79)
A 7Z56(pg. 5-85)
A 7Z42M
A 7Z62M
A 7Z45M
A 7Z56M
A 7Z63(pg. 5-78)
A 7Z57(pg. 5-86)
A 7Z63M
A 7Z57M
A 7Z31(pg. 5-100)
A 7Z32(pg. 5-101)
A 7Z33(pg. 5-102)
A 7Z31M
A 7Z32M
A 7Z33M
Flange-Mounted
Nonaligning
12
Acetal
A 7Z41(pg. 5-74)
Press-Fit
Self-Clinching
Nonaligning
Flange-Mounted
Self-Aligning
PTFE
Bronze
A 7Z49(pg. 5-88)
SELF-CLINCHING SINTERED BRONZE PRESSBEARINGS

SELF-ALIGNING TO 5
SELF-LUBRICATING
R
Inch
MATERIAL:
Bearing - Oil-Impregnated Sintered Bronze

Retainer - Carbon Steel, Black Oxide Finish or
Carbon Steel, Zinc Plated.

T
1
-20F to +200F
KNURLING
SHAFT REQUIREMENTS:
Any material, Rb 95 min., with

a 16 in. or finer finish.
I.D.
4
C
6
D
B
5
INCH COMPONENT
Catalog Number *
A
A
A
A
A
A
A
A
7Z40-F
7Z40-F
7Z40-F
7Z40-F
7Z40-F
7Z40-F
7Z40-F
7Z40-F
B125
B187
B250
B312
B375
B500
B625
B750
Catalog Number
(Ref.)
A
A
A
A
A
A
A
A
7Z40-F
7Z40-F
7Z40-F
7Z40-F
7Z40-F
7Z40-F
7Z40-F
7Z40-F
B125
B187
B250
B312
B375
B500
B625
B750
Nom.
I.D.
1/8
3/16
1/4
5/16
3/8
1/2
5/8
3/4
A
Panel
Hole Dia.
Actual
I.D.
Min.
Max.
.1255
.1883
.2508
.3133
.3758
.5010
.6260
.7510
.1260
.1888
.2513
.3140
.3765
.5017
.6270
.7520
Max.
Speed
+.003
-.000
.344
.500
.500
.625
.625
.812
1.063
1.250
B
Min.
Panel
Thickness
C
Knurl
O.D.
D
Height
.04
.04
.04
.06
.06
.06
.075
.09
.39
.55
.55
.67
.67
.87
1.10
1.30
.29
.40
.40
.46
.46
.64
.77
.89
9
10
11
Max. Radial Load

lbf
rpm
Steel
Stainless Steel
30550
20310
15270
12240
10180
7640
6110
5090
70
190
360
430
430
600
1650
2000
70
190
210
270
270
350
950
1150
* To complete the Catalog Number, specify:

S for a Carbon Steel Retainer
or X for a Stainless Steel Retainer.
Example: For a Carbon Steel Retainer, specify Catalog Number A 7Z40-FSB250.
See next page for installation data
5-67
12
13
14
15
16
I
R
T
1
SELF-CLINCHING PTFE BRONZE PRESSBEARINGS

SELF-ALIGNING TO 5
SELF-LUBRICATING
EXTREME TEMPERATURE RANGE
Inch
IDEAL FOR ALL TYPES OF ROTATING, OSCILLATING
AND SLIDING MOTIONS
0
1
MATERIAL:
Bearing - PTFE-Impregnated Porous Bronze

Retainer - Carbon Steel, Black Oxide Finish
2
3
-330F to +380F
FEATURES:
Knurling ensures secure self-clinching.

Simple quick installation.
Major assembly and production savings.
Mounting blocks not necessary.
SHAFT REQUIREMENTS:
SHAFT DIAMETERS:
6
7
Any material, soft or hard, with a

16 in. or finer finish.
D
B
Nominal Shaft Maximum Minimum

Diameter
Diameter Diameter
3/16
1/4
5/16
3/8
1/2
5/8
3/4
.1865
.2490
.3115
.3740
.4990
.6240
.7491
.1858
.2481
.3106
.3731
.4980
.6230
.7479
KNURLING
I.D.
8
9
10
11
12
13
INCH COMPONENT
Catalog Number
A
A
A
A
A
A
A
7Z60-FSDU187
7Z60-FSDU250
7Z60-FSDU312
7Z60-FSDU375
7Z60-FSDU500
7Z60-FSDU625
7Z60-FSDU750
Nom.
I.D.
3/16
1/4
5/16
3/8
1/2
5/8
3/4
A
Panel
Hole Dia.
+.003
-.000
.500
.625
.625
.812
1.063
1.250
1.250
B
Min.
Panel
Thickness
C
Knurl
O.D.
D
Height
.04
.06
.06
.06
.09
.09
.09
.55
.67
.67
.87
1.10
1.30
1.30
.40
.46
.46
.64
.77
.89
.87
Max.
Speed
rpm
8040
6020
4820
4010
3010
2410
2010
Max.
Radial
Load
lbf
360
430
430
600
950
1150
1150
14
15
16
5-68
SELF-CLINCHING INSTALLATION DETAILS

FOR SINTERED BRONZE PRESSBEARINGS
FOR PTFE BRONZE PRESSBEARINGS
SELF-ALIGNING TO 5
Inch
SELF-LUBRICATING
0
1
AND SLIDING MOTIONS
INSTALLATION:
1. Punch or drill and ream a hole of diameter A

in panel as specified in the table below.
Panel hardness Rb 65 max., Rb 75 max.
(Stainless Steel retainer).
CL
PANEL
2. Place bearing assembly in hole. The slight

interference fit assures centering the assembly
in the mounting hole.
3. Using an anvil with diameter N, a minimum
depth of O and a Press Tool diameter of P,
install the bearing assembly into the panel
by constantly applying a force of F, per the table,
until the assembly is flush with the panel surface.
3
N
4
5
DO NOT USE HAMMER BLOWS!

TOOLING AND INSTALLATION DATA - For Sintered Bronze
1/8
3/16
1/4
5/16
3/8
1/2
5/8
3/4
A
Panel
Hole Dia.
+.003
-.000
.344
.500
.500
.625
.625
.812
1.063
1.250
N
Anvil
Dia.
+.005
-.000
.359
.515
.515
.640
.640
.827
1.078
1.265
O
Minimum
Anvil
Depth
P
Press Tool
Minimum
Dia.
.490
.600
.600
.660
.660
.840
.970
1.090
.59
.75
.75
.87
.87
1.07
1.30
1.50
F
CL
Min. Dist. Install Force
Centerline to Cold-Rolled
Steel
Panel Edge
.24
.38
.38
.45
.45
.50
.75
.75
tons
2.0
5.0
5.0
5.5
5.5
5.5
6.0
8.0
Nominal
Shaft
Diameter
3/16
1/4
5/16
3/8
1/2
5/8
3/4
+.003
-.000
.500
.625
.625
.812
1.063
1.250
1.250
N
Anvil
Diameter
+.005
-.000
.515
.640
.640
.827
1.078
1.265
1.265
6
7
8
9
10
TOOLING AND INSTALLATION DATA - For PTFE Bronze Nonaligning
A
Panel
Hole Dia.
DO NOT DEBURR OR BREAK EDGE OF HOLE.
Nominal
Shaft
Diameter
O
Minimum
Anvil
Depth
P
Press Tool
Minimum
Diameter
.60
.66
.66
.84
.97
1.09
1.09
.75
.87
.87
1.07
1.30
1.50
1.50
CL
F
Steel tons
Panel Edge
.375
.453
.453
.500
.750
.750
.800
5.0
5.5
5.5
5.5
6.0
6.0
6.0
11
12
13
See previous page for product specifications
14
15
5-69
16
I
R
T
1
SELF-CLINCHING PTFE BRONZE PRESSBEARINGS

NONALIGNING
SELF-LUBRICATING
Inch
AND SLIDING MOTIONS
0
1
MATERIAL:

2
3
-330F to +380F
FEATURES:

SHAFT REQUIREMENTS:
SHAFT DIAMETERS:
6
7
Any material, soft or hard, with a

16 in. or finer finish.
D
B

Diameter
Diameter Diameter
3/16
1/4
5/16
3/8
1/2
5/8
3/4
.1865
.2490
.3115
.3740
.4990
.6240
.7491
.1858
.2481
.3106
.3731
.4980
.6230
.7479
KNURLING
I.D.
8
C
9
10
INCH COMPONENT
Catalog Number
11
12
13
A
A
A
A
A
A
A
7Z61-FSDU187
7Z61-FSDU250
7Z61-FSDU312
7Z61-FSDU375
7Z61-FSDU500
7Z61-FSDU625
7Z61-FSDU750
3/16
1/4
5/16
3/8
1/2
5/8
3/4
A
Panel
Hole Dia.
+.003
-.000
.375
.500
.500
.625
.812
.875
1.063
B
Min.
Panel
Thickness
C
Knurl
O.D.
D
Height
.04
.04
.04
.06
.06
.06
.075
.42
.55
.55
.67
.87
.92
1.10
.29
.36
.50
.48
.49
.62
.62
Max.
Speed
rpm
8040
6020
4820
4010
3010
2410
2010
Max.
Radial
Load
lbf
360
430
430
600
950
1150
1150
14
15
16
Nom.
I.D.
5-70

FOR PTFE BRONZE PRESSBEARINGS
NONALIGNING
SELF-LUBRICATING
Inch
0
1
AND SLIDING MOTIONS
INSTALLATION:
CL

Panel material Rb 65 max.
PANEL

R
T
1
2
3
N
TOOLING AND INSTALLATION DATA - For PTFE Bronze Nonaligning
Nominal
Shaft
Diameter
3/16
1/4
5/16
3/8
1/2
5/8
3/4
A
Panel
Hole Dia.
+.003
-.000
.375
.500
.500
.625
.812
.875
1.063
N
Anvil
Diameter
+.005
-.000
.390
.515
.515
.640
.827
.890
1.078
O
Minimum
Anvil
Depth
P
Press Tool
Minimum
Diameter
.49
.56
.70
.68
.69
.82
.82
.62
.75
.75
.87
1.07
1.12
1.30
CL
F
Steel tons
Panel Edge
.250
.375
.375
.453
.500
.625
.750
2.0
5.0
5.0
5.5
5.5
6.0
6.0
6
7
8
9
10
11
12
13
14
15
5-71
16
I
R
SELF-CLINCHING ACETAL PRESSBEARINGS

SELF-ALIGNING TO 5
SELF-LUBRICATING
Inch
MATERIAL:
T
1
Bearing - Acetal with PTFE added

or 300 Series Stainless Steel,
Carbon Steel, Zinc Plated. When
stock is depleted, Carbon Steel,
Black Oxide Finish will be supplied.
-40F to +300F
SHAFT REQUIREMENTS:
Any material, soft or hard,

with a 16 in. or finer finish.
KNURLING
KNURLING
5
6
I.D.
I.D.
A
5
A
5
7
D
Fig. 1
Fig. 2
9
10
INCH COMPONENT
11
12
13
14
15
16
Fig. 1
A 7Z43-F
A 7Z43-F
A 7Z43-F
A 7Z43-F
A 7Z43-F
Fig. 2
A 7Z43-F
A 7Z43-F
A 7Z43-F
A 7Z43-F
Actual I.D.
A
Panel
Hole Dia.
B
C
Min.
Knurl
Panel
Thickness O.D.
Max.
Min.
D093AF
D125AF
D187AF
D250AF
D312AF
3/32
1/8
3/16
1/4
5/16
.0970
.1280
.1905
.2530
.3155
.0940
.1260
.1885
.2510
.3135
.234
.297
.375
.375
.547
.04
.04
.04
.04
.06
.28
.34
.42
.42
.60
.19
.23
.28
.28
.39
7500
5720
3820
2890
2320
20
30
50
70
120
D375AF
D500AF
D625AF
D750AF
3/8
1/2
5/8
3/4
.3780
.5040
.6280
.7530
.3760
.5010
.6260
.7510
.625
.812
1.063
1.250
.06
.06
.075
.09
.67
.87
1.11
1.30
.45
.65
.77
.89
1920
1450
1160
970
190
320
450
640
+.003
-.000

S for a Carbon Steel Retainer
or X for a Stainless Steel Retainer.
Example: For a Carbon Steel retainer, specify Catalog Number A 7Z43-FSD250AF.
5-72
Max. Max.
D
Radial
Speed
Height
Load
rpm
Nom.
I.D.
Catalog Number *
lbf

FOR ACETAL PRESSBEARINGS
SELF-ALIGNING TO 5
SELF-CLINCHING
SELF-LUBRICATING
R
Inch
INSTALLATION:

Panel hardness Rb 65 max., Rb 75 max.
(Stainless Steel retainer).
CL
T
1
PANEL

3
N
5
TOOLING AND INSTALLATION DATA
Nominal
Shaft
Diameter
3/32
1/8
3/16
1/4
5/16
3/8
1/2
5/8
3/4
A
Panel
Hole Dia.
+.003
-.000
.234
.297
.375
.375
.547
.625
.812
1.063
1.250
N
Anvil
Dia.
+.005
-.000
.247
.312
.390
.390
.562
.640
.827
1.078
1.265
O
Minimum
Anvil
Depth
P
Press Tool
Minimum
Dia.
.39
.43
.48
.48
.59
.65
.85
.97
1.09
.48
.54
.62
.62
.80
.87
1.07
1.31
1.50
CL
F
Install Force
Min. Dist.
Cold-Rolled
Centerline to
Steel
Panel Edge
tons
.187
.218
.250
.250
.406
.453
.500
.750
.750
1.0
1.5
2.0
2.0
5.0
5.5
5.5
6.0
8.0
6
7
8
9
10
11
12
13
14
15
5-73
16
I
R
T
1
2
3
SINTERED BRONZE PRESSBEARINGS

PRESS-FIT INSTALLATION
SELF-ALIGNING TO 5
SELF-LUBRICATING
Inch
MATERIAL:

-20F to +200F
SHAFT REQUIREMENTS:
Any material, Rb 95 min., with

a 0.4 in. or finer finish.
INSTALLATION NOTES:
1. The punch must be relieved to

accommodate protruding insert.
2. DO NOT PRESS BEARING ON INSERT!
A
5
4
C
5
6
I.D.
.03
7
INCH COMPONENT
8
9
10
Catalog Number
A
A
A
A
A
A
A
A
7Z41-PSB125
7Z41-PSB187
7Z41-PSB250
7Z41-PSB312
7Z41-PSB375
7Z41-PSB500
7Z41-PSB625
7Z41-PSB750
11
12
13
14
15
16
5-74
Nom.
I.D.
1/8
3/16
1/4
5/16
3/8
1/2
5/8
3/4
Actual
I.D.
Min.
Max.
.1255
.1883
.2508
.3133
.3758
.5010
.6260
.7510
.1260
.1888
.2513
.3140
.3765
.5017
.6270
.7520
A
Panel
Hole Dia.
+.003
-.000
.344
.500
.500
.625
.625
.812
1.063
2.000
B
Flange
Dia.
.41
.56
.56
.69
.69
.88
1.13
1.31
C
Height
Along
Centerline
.27
.38
.38
.43
.43
.60
.77
.85
Max.
Speed
rpm
30550
20310
15270
12240
10180
7640
6110
1150
Max.
Radial
Load
lbf
70
180
360
430
430
600
1650
2000
ACETAL PRESSBEARINGS
SELF-ALIGNING TO 5
SELF-LUBRICATING
R
Inch
MATERIAL:
Bearing - PTFE-Filled Acetal

T
1
-40F to +300F
SHAFT REQUIREMENTS:
Any material, soft or hard, with

a 16 in. or finer finish.
INSTALLATION NOTES:

A
5
4
C
.03
5
6
I.D.
B
7
INCH COMPONENT
Catalog Number
A
A
A
A
A
A
A
7Z44-PSD125AF
7Z44-PSD187AF
7Z44-PSD250AF
7Z44-PSD312AF
7Z44-PSD375AF
7Z44-PSD500AF
7Z44-PSD625AF
Nom.
I.D.
1/8
3/16
1/4
5/16
3/8
1/2
5/8
Actual
I.D.
Min.
Max.
.1260
.1885
.2510
.3135
.3760
.5010
.6260
.1280
.1905
.2530
.3155
.3780
.5040
.6280
A
B
Panel
Hole Dia. Flange
+.003
Dia.
-.000
.344
.500
.500
.625
.625
.812
1.063
.41
.56
.56
.69
.69
.88
1.12
rpm
Max
Radial
Load
5720
3820
2890
2320
1920
1160
970
30
50
70
120
190
320
450
C
Height
Max
Speed
.27
.38
.38
.43
.43
.60
.77
lbf
10
11
12
13
14
15
5-75
16
I
R
FLANGE-MOUNTED SINTERED BRONZE BEARINGS

SELF-ALIGNING TO 5
SELF-LUBRICATING
Inch
MATERIAL:

Flange & Retainer - Carbon Steel, Black Oxide Finish
1
2
-20F to +200F
SHAFT REQUIREMENTS:
Any material, soft or hard, Rb 95 min.,

4
C
I.D.
7/32 HOLE (TYP)
6
A
5
7
F
9
10
INCH COMPONENT
Catalog Number
12
A
A
A
A
A
A
A
13
Catalog Number
(Ref.)
11
14
15
16
A
A
A
A
A
A
A
7Z42-BFM187B
7Z42-BFM250B
7Z42-BFM312B
7Z42-BFM375B
7Z42-BFM500B
7Z42-BFM625B
7Z42-BFM750B
7Z42-BFM187B
7Z42-BFM250B
7Z42-BFM312B
7Z42-BFM375B
7Z42-BFM500B
7Z42-BFM625B
7Z42-BFM750B
5-76
Nom.
I.D.
3/16
1/4
5/16
3/8
1/2
5/8
3/4
D
Mount
Dist.
1.22
1.22
1.53
1.53
1.78
1.78
1.78
Actual
I.D.
Min.
Max.
.1883
.2508
.3133
.3758
.5010
.6260
.7510
.1888
.2513
.3140
.3765
.5017
.6270
.7520
E
Nominal
Flange
Thickness
.05
.05
.06
.06
.06
.09
.09
A
Clearance
Hole Dia.
(Ref.)
B
Overall
Length
C
Overall
Width
1.80
1.80
2.10
2.10
2.35
2.35
2.35
.88
.88
1.19
1.19
1.44
1.56
1.85
17/32
17/32
21/32
21/32
27/32
1-3/32
1-9/32
F
Height
Max.
Speed
.40
.40
.46
.46
.64
.77
.89
20310
15270
12240
10180
7640
6110
5090
rpm
Max.
Radial
Load
lbf
190
190
270
320
600
890
1280
FLANGE-MOUNTED PTFE BRONZE BEARINGS

SELF-ALIGNING 5
SELF-LUBRICATING
IDEAL FOR ALL TYPES OF ROTATING,
OSCILLATING AND SLIDING MOTIONS
R
Inch
MATERIAL:

-330F to +380F
SHAFT REQUIREMENTS:
SHAFT DIAMETERS:

Diameter
Diameter Diameter
1/4
5/16
3/8
1/2
5/8
3/4
.2490
.3115
.3740
.4990
.6240
.7491
.2481
.3106
.3731
.4980
.6230
.7479
I.D.
7/32 HOLE (TYP)
A
5
INCH COMPONENT
Catalog Number
A
A
A
A
A
A
7Z62-FDU250
7Z62-FDU312
7Z62-FDU375
7Z62-FDU500
7Z62-FDU625
7Z62-FDU750
Catalog Number
(Ref.)
A
A
A
A
A
A
7Z62-FDU250
7Z62-FDU312
7Z62-FDU375
7Z62-FDU500
7Z62-FDU625
7Z62-FDU750
Nom.
I.D.
A
Clearance
Hole Dia.
(Ref.)
B
Overall
Length
C
Overall
Width
D
Mounting
Distance
1/4
5/16
3/8
1/2
5/8
3/4
21/32
21/32
27/32
1-3/32
1-9/32
1-9/32
2.10
2.10
2.35
2.35
2.35
2.35
1.19
1.19
1.43
1.56
1.85
1.85
1.53
1.53
1.78
1.78
1.78
1.78
E
Nominal
Flange
Thickness
.06
.06
.06
.09
.09
.09
F
Height
.46
.46
.64
.77
.89
.87
Max.
Speed
rpm
6020
4820
4010
3010
2410
2010
Max.
Radial
Load
lbf
430
430
600
950
1150
1150
5-77
10
11
12
13
14
15
16
I
R
T
FLANGE-MOUNTED PTFE BRONZE BEARINGS

NONALIGNING
SELF-LUBRICATING
IDEAL FOR ALL TYPES OF ROTATING,
OSCILLATING AND SLIDING MOTIONS
Inch
MATERIAL:

2
3
4
5
6
-330F to +380F
SHAFT REQUIREMENTS:
SHAFT DIAMETERS:

Diameter
Diameter Diameter
1/4
5/16
3/8
1/2
5/8
3/4
.2490
.3115
.3740
.4990
.6240
.7491
.2481
.3106
.3731
.4980
.6230
.7479
I.D.
7/32 HOLE (TYP)
A
7
8
9
10
11
12
13
14
INCH COMPONENT
Catalog Number
A
A
A
A
A
A
7Z63-FDU250
7Z63-FDU312
7Z63-FDU375
7Z63-FDU500
7Z63-FDU625
7Z63-FDU750
Catalog Number
(Ref.)
A
A
A
A
A
A
7Z63-FDU250
7Z63-FDU312
7Z63-FDU375
7Z63-FDU500
7Z63-FDU625
7Z63-FDU750
15
16
5-78
Nom.
I.D.
A
Clearance
Hole Dia.
(Ref.)
B
Overall
Length
C
Overall
Width
D
Mounting
Distance
1/4
5/16
3/8
1/2
5/8
3/4
17/32
17/32
21/32
27/32
29/32
1-3/32
1.80
1.80
2.09
2.09
2.09
2.35
.88
.88
1.19
1.26
1.26
1.56
1.21
1.21
1.53
1.53
1.53
1.78
E
Nominal
Flange
Thickness
.05
.05
.06
.09
.09
.09
F
Height
.36
.50
.48
.49
.62
.62
Max.
Speed
rpm
6020
4820
4010
3010
2410
2010
Max.
Radial
Load
lbf
430
430
600
950
1150
1150
FLANGE-MOUNTED ACETAL BEARINGS

SELF-ALIGNING TO 5
SELF-LUBRICATING
FLANGE-MOUNTED
R
Inch
MATERIAL:
Bearing - PTFE-Filled Acetal

Flange & Retainer - Carbon Steel, Black Oxide Finish
T
1
-40F to +300F
SHAFT REQUIREMENTS:
Any material, soft or hard

3
4
I.D.
I.D.
7/32 HOLE (TYP)
7/32 HOLE (TYP)

A
5
A
5
5
6
B
Fig. 1
B
Fig. 2
INCH COMPONENT
Min.
Max.
A
Clearance
Hole Dia.
(Ref.)
3/16
1/4
5/16
.1885
.2510
.3135
1905
2530
3155
13/32
13/32
19/32
1.80
1.80
2.10
.87
.87
1.19
10
3/8
1/2
5/8
3/4
.3760
.5010
.6260
.7510
3780
5040
6280
7530
21/32
27/32
1-3/32
1-9/32
2.10
2.35
2.35
2.34
1.19
1.43
1.56
1.85
11
Catalog Number
Nom.
I.D.
A 7Z45-BFM187AF
A 7Z45-BFM250AF
A 7Z45-BFM312AF
A
A
A
A
Actual
I.D.
Fig. 1
Fig. 2
7Z45-BFM375AF
7Z45-BFM500AF
7Z45-BFM625AF
7Z45-BFM750AF
C
Flange
Width
Catalog Number
(Ref.)
D
Mount
Distance
E
Nominal
Flange
Thickness
F
Height
Max.
Speed
rpm
Max.
Radial
Load
A 7Z45-BFM187AF
A 7Z45-BFM250AF
A 7Z45-BFM312AF
1.21
1.21
1.53
.05
.05
.06
.28
.28
.39
3820
2890
2320
50
70
120
A
A
A
A
1.53
1.78
1.78
1.78
.06
.06
.09
.09
.45
.65
.77
.89
1920
1450
1160
970
190
320
450
640
Fig. 1
Fig. 2
B
Overall
Length
7Z45-BFM375AF
7Z45-BFM500AF
7Z45-BFM625AF
7Z45-BFM750AF
lbf
5-79
12
13
14
15
16
I
R
T
1
2
3
NEEDLE ROLLER BEARINGS

FOR 1/8 TO 1 INCH HARDENED SHAFTS
EXTREMELY HIGH-SPEED
HIGH LOAD CAPACITY
Inch
MATERIAL:
Roller Cup - Case-Hardened Steel

Needle Bearing - 52100 Hardened Chrome Steel
Bearing Cage - Low Carbon Steel
FEATURES:
Low profile, lightweight caged.

Caged needle bearings offer up to 3 times the
speed of uncaged designs.
Extremely low rolling friction.
High lubrication capacity.
Low sensitivity to misalignment.
Needles have high length to diameter ratios.
W
4
B
O.D.
5
6
7
INCH COMPONENT
Catalog Number
8
9
10
11
12
13
14
S99NH2-BN0408
S99NH2-BN0608
S99NH2-BN0612
S99NH2-BN0808
S99NH2-BN0814
S99NH2-BN1010
S99NH2-BN1018
S99NH2-BN1210
S99NH2-BN1220
S99NH2-BN1610
S99NH2-BN1612
S99NH2-BN1624
S99NH2-BN2014
S99NH2-BN2024
S99NH2-BN2412
S99NH2-BN2416
S99NH2-BN2424
S99NH2-BN3216
S99NH2-BN3232
1/8
3/16
3/16
1/4
1/4
5/16
5/16
3/8
3/8
1/2
1/2
1/2
5/8
5/8
3/4
3/4
3/4
1
1
.2500
.3438
.3438
.4375
.4375
.5000
.5000
.5625
.5625
.6875
.6875
.6875
.8125
.8125
1.0000
1.0000
1.0000
1.2500
1.2500
Rating
Housing W Max.* Loadlbf
Shaft
Bore
+.000 Speed
Diameter
-.010
rpm Dynamic Static
Dia.
.2505/.2500
.250
.250
.3437/.3432
.375
.3437/.3432
.250
.4380/.4370
.438
.4380/.4370
.312
.5005/.4995
.562
.5005/.4995
.312
.5630/.5620
.625
.5630/.5620
.312
.6880/.6870
.375
.6880/.6870
.750
.6880/.6870
.438
.8130/.8120
.750
.8130/.8120
1.0005/.9995 .375
1.0005/.9995 .500
1.0005/.9995 .750
1.2505/1.2495 .500
1.2505/1.2495 1.000
48000
40000
40000
35000
35000
29000
29000
25000
25000
19000
19000
19000
16000
16000
13000
13000
13000
10000
10000
240
400
620
360
920
650
1340
650
1660
820
1040
2230
1480
2700
1600
2210
3450
2850
5600
Inner Race
Available
See Series
S99RH2-...
165 .1250/.1247
305 .1875/.1872
530 .1875/.1872
260 .2500/.2495
870 .2500/.2495
590 .3125/.3120
1480 .3125/.3120
610 .3750/.3745
2040 .3750/.3745
890 .5000/.4995
1210 .5000/.4995
3200 .5000/.4995
2100 .6250/.6245
4450 .6250/.6245 S99RH2-BNR1220A
1860 .7500/.7495
2800 .7500/.7495 S99RH2-BNR1624
5000 .7500/.7495 S99RH2-BNR1624A
4300 1.0000/.9995 S99RH2-BNR2432
10200 1.0000/.9995 S99RH2-BNR2432A
Shaft surface hardness must be Rc 58 minimum; or use inner race over softer shaft, where available.
For ferrous materials.

* Represents speed values of bearings lubricated with oil. With grease lubricant, 60% of given values are permissible.
Standard bearings are oiled or greased, at our option, with general purpose lubricants. Other lubricants are available on
special order.
15
16
B
Bore O.D.
5-80
INNER RACES FOR NEEDLE BEARINGS

USED AS INNER RACE ON SOFT SHAFTS
CAN BE USED AS HARDENED BUSHINGS
R
Inch
MATERIAL:
Alloy Steel, Hardened To Rc 58 Min.
FEATURES:
O.D. ground to 16 in. AA surface roughness.

All corners chamfered for easy assembly.
Wider units to accommodate shaft translation.
T
1
2
3
4
D
5
6
INCH COMPONENT
Catalog Number
S99RH2-BNR1218A
S99RH2-BNR1220A
S99RH2-BNR1624A
S99RH2-BNR1624C
S99RH2-BNR2028B
S99RH2-BNR2028C
S99RH2-BNR2432
S99RH2-BNR2432B
* S99RH2-BNR2432A
d
I.D.
+.0000
-.0005
.3750
.3750
.5000
.5000
.6250
.6250
.7500
.7500
.7500
D
O.D.
+.0000
-.0005
.5625
.6250
.7500
.7500
.8750
.8750
1.0000
1.0000
1.0000
W
Width
+.015
-.005
.750
.750
.750
1.000
.750
1.000
.500
.750
1.000
Shaft
Diameter
Press Fit
Shaft
Diameter
Slip Fit
.3755/.3752
.3755/.3752
.5006/.5003
.5006/.5003
.6256/.6253
.6256/.6253
.7507/.7503
.7507/.7503
.7507/.7503
.3748/.3744
.3748/.3744
.4998/.4993
.4998/.4993
.6248/.6243
.6248/.6243
.7497/.7492
.7497/.7492
.7497/.7492
7
8
9
10
* To be discontinued when present stock is depleted
11
12
13
14
15
5-81
16
SELF-CLINCHING NEEDLE ROLLER PRESSBEARINGS

SELF-ALIGNING TO 5 OR NONALIGNING
R
T
MATERIAL:
Inch
Bearing - Drawn Cup Needle

Housing - Carbon Steel, Black Oxide Finish
-22F to +212F
1
2
3
4
5
6
7
FEATURES:
High-speed, High-load applications.

Simple, quick installation.
SHAFT REQUIREMENTS:
Any material, Rc 58 to 64,
with a 16 in. or finer finish
SHAFT DIAMETERS
SELF-ALIGNING & NONALIGNING
Nominal
Shaft
Diameter
1/8
3/16
1/4
5/16
3/8
1/2
5/8
3/4
Maximum Minimum
Diameter Diameter
.1250
.1875
.2500
.3125
.3750
.5000
.6250
.7500
Fig. 1
KNURLING
.1247
.1872
.2495
.3120
.3745
.4995
.6245
.7495
I.D.
Fig. 2
C
A
8
9
10
11
12
13
14
15
16
INCH COMPONENT
Catalog Number
Fig. 1 Self-Aligning
A 7Z46-FSN125
A 7Z46-FSN187
A 7Z46-FSN250
A 7Z46-FSN312
A 7Z46-FSN375
A 7Z46-FSN500
A 7Z46-FSN625
Fig. 2 Nonaligning
A 7Z48-FSN125
A 7Z48-FSN187
A 7Z48-FSN250
A 7Z48-FSN312
A 7Z48-FSN375
A 7Z48-FSN500
A 7Z48-FSN625
A 7Z48-FSN750
Nom.
I.D.
A
Panel
Hole Dia.
+.003
-.000
B
Min.
Panel
Thickness
C
Knurl
O.D.
D
Height
1/8
3/16
1/4
5/16
3/8
1/2
5/8
.500
.625
.625
.812
.812
1.063
1.250
.04
.06
.06
.06
.06
.075
.09
.55
.67
.67
.87
.87
1.10
1.30
.40
.46
.46
.64
.64
.77
.89
31500
21000
44000
35500
29500
22000
17600
360
430
430
600
600
950
1830
1/8
3/16
1/4
5/16
3/8
1/2
5/8
3/4
.375
.500
.625
.625
.812
.875
1.063
1.250
.04
.04
.06
.06
.06
.06
.075
.09
.42
.55
.67
.67
.87
.92
1.10
1.30
.312
.500
.440
.440
.440
.500
.625
.625
31500
21000
44000
35500
29500
22000
17600
14700
360
430
430
600
600
950
1830
1830
Max.
Speed
rpm
Max.
Radial
Load
lbf
5-82

FOR NEEDLE ROLLER PRESSBEARINGS
SELF-ALIGNING TO 5 OR NONALIGNING
R
Inch
INSTALLATION:

Panel hardness Rb 65 max.

CL
T
1
PANEL
2
O
4
5
Nominal
Shaft
Diameter
Fig. 1 Self-Aligning
1/8
3/16
1/4
5/16
3/8
1/2
5/8
Fig. 2 Nonaligning
1/8
3/16
1/4
5/16
3/8
1/2
5/8
3/4
F
CL
Install Force
Min. Dist.
Cold-Rolled
Centerline to
Steel
Panel Edge
tons
A
Panel
Hole Dia.
N
Anvil
Dia.
+.005
-.000
O
Minimum
Anvil
Depth
P
Press Tool
Minimum
Dia.
.500
.625
.625
.812
.812
1.063
1.250
.515
.640
.640
.828
.828
1.078
1.270
.60
.66
.66
.84
.84
.97
1.09
.75
.87
.87
1.07
1.07
1.30
1.50
.375
.453
.453
.500
.500
.750
.750
5.0
5.5
5.5
5.5
5.5
6.0
8.0
.375
.500
.625
.625
.812
.875
1.063
1.250
.390
.515
.640
.640
.828
.890
1.078
1.270
.51
.70
.64
.64
.64
.70
.82
.83
.62
.75
.87
.87
1.07
1.12
1.30
1.50
.250
.375
.453
.453
.500
.625
.750
.750
2.0
5.0
5.5
5.5
5.5
6.0
6.0
8.0
+.003
-.000
6
7
8
9
10
11
12
13
14
15
5-83
16
I
R
NEEDLE ROLLER PRESSBEARINGS

SELF-ALIGNING TO 5
Inch
MATERIAL:

-22F to +212F
FEATURES:
2
3
4
High-speed, high-load.
No precision holes required.
SHAFT REQUIREMENTS:
Any material, Rc 58 to 64
INSTALLATION NOTES:
A
5

7
8
9
10
.03
I.D.
SHAFT DIAMETERS
Nominal
Shaft
Diameter
Maximum
Diameter
Minimum
Diameter
1/8
3/16
1/4
5/16
3/8
1/2
5/8
.1250
.1875
.2500
.3125
.3750
.5000
.6250
.1247
.1872
.2495
.3120
.3745
.4995
.6245
INCH COMPONENT
11
12
13
Catalog Number
A
A
A
A
A
A
A
7Z47-PSN125
7Z47-PSN187
7Z47-PSN250
7Z47-PSN312
7Z47-PSN375
7Z47-PSN500
7Z47-PSN625
14
15
16
5-84
Nom.
I.D.
1/8
3/16
1/4
5/16
3/8
1/2
5/8
A
Panel
Hole Dia.
+.003 / -.000
.500
.625
.625
.812
.812
1.063
1.250
C
Flange
Dia.
E
Height
.56
.69
.69
.88
.88
1.13
1.31
.37
.43
.43
.60
.60
.77
.85
Max.
Speed
rpm
31500
21000
44000
35500
29500
22000
17600
Max.
Radial
Load
lbf
360
430
430
600
600
950
1830
FLANGE-MOUNTED NEEDLE ROLLER BEARINGS

SELF-ALIGNING TO 5
FLANGE-MOUNTED
R
Inch
MATERIAL:

-22F to +212F
SHAFT REQUIREMENTS:
SHAFT DIAMETERS:
Nominal
Shaft
Diameter
1/8
3/16
1/4
5/16
3/8
1/2
5/8
Maximum Minimum
Diameter Diameter
.1250
.1875
.2500
.3125
.3750
.5000
.6250
.1247
.1872
.2495
.3120
.3745
.4995
.6245
C
I.D.
5
7/32 HOLE (TYP)
6
A
5
INCH COMPONENT
Catalog Number
*A
*A
A
A
A
A
A
7Z56-BFM125N
7Z56-BFM187N
7Z56-BFM250N
7Z56-BFM312N
7Z56-BFM375N
7Z56-BFM500N
7Z56-BFM625N
Catalog Number
(Ref.)
*A
*A
A
A
A
A
A
7Z56-BFM125N
7Z56-BFM187N
7Z56-BFM250N
7Z56-BFM312N
7Z56-BFM375N
7Z56-BFM500N
7Z56-BFM625N
Nom.
I.D.
1/8
3/16
1/4
5/16
3/8
1/2
5/8
A
Clearance
Hole Diameter
(Ref.)
E
Nominal
Flange
Thickness
.05
.06
.06
.09
.09
.09
.09
17/32
21/32
21/32
27/32
27/32
1-3/32
1-9/32
F
Height
.40
.46
.46
.64
.64
.77
.89
9
B
Overall
Length
C
Overall
Width
D
Mounting
Distance
1.80
2.10
2.10
1.78
1.78
2.34
2.34
.88
1.19
1.19
1.25
1.25
1.56
1.85
1.22
1.53
1.53
1.22
1.22
1.78
1.78
Max.
Speed
rpm
31500
21000
44000
35500
29500
22000
17600
Max.
Radial
Load
10
11
12
lbf
360
430
600
600
600
950
1150
13
5-85
16
14
15
I
R
FLANGE-MOUNTED NEEDLE ROLLER BEARINGS

NONALIGNING
FLANGE-MOUNTED
Inch
MATERIAL:

1
2
-22F to +212F
SHAFT REQUIREMENTS:
SHAFT DIAMETERS:
3
4
5
Nominal
Shaft
Diameter
1/8
1/4
5/16
3/8
1/2
5/8
3/4
Maximum Minimum
Diameter Diameter
.1250
.2500
.3125
.3750
.5000
.6250
.7500
.1247
.2495
.3120
.3745
.4995
.6245
.7495
C
I.D.
7/32 HOLE (TYP)
7
F
8
9
10
11
12
13
14
15
16
INCH COMPONENT
Catalog Number
*A
A
A
A
A
A
A
7Z57-BFM125N
7Z57-BFM250N
7Z57-BFM312N
7Z57-BFM375N
7Z57-BFM500N
7Z57-BFM625N
7Z57-BFM750N
Catalog Number
(Ref.)
*A
A
A
A
A
A
A
7Z57-BFM125N
7Z57-BFM250N
7Z57-BFM312N
7Z57-BFM375N
7Z57-BFM500N
7Z57-BFM625N
7Z57-BFM750N
Nom.
I.D.
1/8
1/4
5/16
3/8
1/2
5/8
3/4
A
Clearance
Hole Diameter
(Ref.)
E
Nominal
Flange
Thickness
.05
.06
.06
.09
.09
.09
.09
5-86
13/32
21/32
21/32
27/32
29/32
1-3/32
1-9/32
F
Height
.312
.440
.440
.440
.500
.625
.625
B
Overall
Length
C
Overall
Width
D
Mounting
Distance
1.80
2.10
2.10
1.78
2.10
2.34
2.34
.88
1.19
1.19
1.25
1.26
1.56
1.56
1.22
1.53
1.53
1.22
1.53
1.78
1.78
Max.
Speed
rpm
31500
44000
35500
29500
22000
17600
14700
Max.
Radial
Load
lbf
240
600
600
600
950
1150
1500
ROLLER CLUTCHES
FOR 1/8 TO 3/4 HARDENED SHAFTS
UNIDIRECTIONAL DRIVE
R
Inch
MATERIAL:

Springs - Stainless Steel
Cage - Nylon 66 (or Equivalent)
T
1
Grease +50F to +160F
FEATURES:
Ideal for indexing, backstopping

or overrunning operations.
Free rolling one way, drives in
opposite direction.
Lightweight, low profile.
High indexing frequency,
up to 4 CPS.
Minimum backlash.
3
d D
SHAFT REQUIREMENTS:
Shaft surface hardness must be Rc 58 min.
WHAT IT DOES:
Transmits torque load in one direction.

Overruns freely in opposite direction.
Either shaft or housing can be
driving member.
6
7
GEAR OVERRUNS
SHAFT COUNTERCLOCKWISE
GEAR DRIVES
SHAFT CLOCKWISE
GEAR DRIVES
THROUGH
CLUTCH
HOW IT WORKS:
Rollers wedge between shaft and outer

race. Positive wedging forces prevent
slipping. Springs position rollers for
instantaneous lockup.
CLEARANCE
EXAGGERATED
GEAR OVERRUNS
COUNTERCLOCKWISE
* S99NH3-URC0204
S99NH3-URC0408
S99NH3-URC0608
S99NH3-URC0808
S99NH3-URC1010
S99NH3-URC1210
Bore
1/8
1/4
3/8
1/2
5/8
3/4
9
10
DRIVEN SHAFT
STATIONARY SHAFT
CAUSES ROLLER TO MOVE
OUT OF WEDGE TO RELEASE
CLUTCH WHEN OVERRUNNING
D
O.D.
9/32
7/16
5/8
3/4
7/8
1
W
Clutch
Width
+.00
-.01
.250
.500
.500
.500
.625
.625
d
Max.
Recom. Housing
Dia.
Torque Shaft Dia. Bore
+.001
lbf in.
2.86
18.60
50.40
85.90
175.20
206.00
+.0000
-.0005
.1250
.2500
.3750
.5000
.6250
.7500
-.000
.2812
.4370
.6245
.7495
.8745
.9995
11
12
INCH COMPONENT
Catalog Number
Max. Rotating
Overrun Speed
rpm
Shaft
50000
21000
14000
11000
8500
12000
Housing
30000
12000
12000
9000
5000
7000
* Plastic Springs
5-87
13
14
15
16
I
R
T
1
2
3
4
NEEDLE ROLLER CLUTCH PRESSBEARINGS

SELF-CLINCHING
NONALIGNING
Inch
MATERIAL:
Clutch - Drawn Cup Needle

Housing - Carbon Steel, Zinc Plated
-22F to +212F
FEATURES:

KNURLING
SHAFT REQUIREMENTS:
I.D.
5
6
C
A
7
D
.06
MINIMUM
PANEL THICKNESS
INCH COMPONENT
10
A
Panel Hole Dia.
Catalog Number *
Direction
of
Rotation
Nom.
I.D.
11
A 7Z49-FSC250CW
A 7Z49-FSC375CW
CW
CW
1/4
3/8
12
Catalog Number
(Ref.)
D
Height
Max.
Speed
Max.
Torque
A 7Z49-FSC250CW
A 7Z49-FSC375CW
.94
1.00
12000
12000
18.6
50.4
13

When viewed from the serrated end of the retainer.
14
15
16
5-88
Shaft Diameter
Max.
Min.
.2500
.3750
.2495
.3745
rpm
+.003
-.000
.625
.875
lbf in.
C
Knurl
O.D.
.67
.92
Max.
Radial
Load
lbf
430
600

FOR NEEDLE ROLLER CLUTCH PRESSBEARINGS PHONE: 516.328.3300 FAX: 516.326.8827 WWW.SDP-SI.COM
NONALIGNING
Inch
INSTALLATION:
0
1

B

CL
R
T
1
PANEL
2
O
3
N
4
5
Nominal
Shaft
Diameter
1/4
3/8
A
Panel
Hole Dia.
+.003
-.000
.625
.875
N
Anvil
Dia.
+.005
-.000
.640
.890
O
Minimum
Anvil
Depth
P
Press Tool
Minimum
Dia.
1.14
1.20
.87
1.12
F
CL
Install Force
Min. Dist.
Cold-Rolled
Centerline to
Steel
Panel Edge
tons
.45
.62
5.5
6.0
6
7
8
9
10
11
12
13
14
15
5-89
16
I
R
ROLLER CLUTCHES WITH BEARING SUPPORT

Inch
MATERIAL:
T
1

Cage - Plastic
SHAFT REQUIREMENTS:
2
3
4
d
5
6
7
INCH COMPONENT
Catalog Number
S99NH4-URC1228
S99NH4-URC2032
9
10
11
12
13
14
15
16
5-90
d
Shaft
Dia.
+.0000
-.0003
.375
.625
D
O.D.
.625
.875
Max. Rotating Load Ratings

Max.
W Torque Overrun Speed
lbf
rpm
Width lbf in.
.875
1.000
50.4
175.2
Shaft
14000
8500
Recommended
Housing Bore
Tolerance
Housing Dynamic Static Steel Aluminum

12000
1350
1240 .0005 +.0001/-.0009
5000
1720
1890 .0005 +.0000/-.0010
BANDED THRUST BEARINGS

BANDED ASSEMBLY
GROOVED RACE
OIL HOLE
R
Inch
MATERIAL:
Band - Low Carbon Steel

Balls & Washer - 52100 Chrome Steel
T
1
2
3
B
A
5
A1
6
INCH COMPONENT
Catalog Number
S9912Y-TB050121
S9912Y-TB056121
S9912Y-TB062134
S9912Y-TB068134
S9912Y-TB075146
S9912Y-TB081146
S9912Y-TB087184
S9912Y-TB093184
S9912Y-TB100196
S9912Y-TB106196
S9912Y-TB112209
S9912Y-TB118209
S9912Y-TB125234
S9912Y-TB131234
S9912Y-TB137246
S9912Y-TB143246
S9912Y-TB150259
7
A
Shaft
Dia.
B
O.D.
E
Width
.500
.563
.625
.688
.750
.813
.875
.938
1.000
1.063
1.125
1.188
1.250
1.313
1.375
1.438
1.500
1.219
1.219
1.344
1.344
1.469
1.469
1.844
1.844
1.969
1.969
2.094
2.094
2.344
2.344
2.469
2.469
2.594
.563
.563
.563
.563
.563
.563
.625
.625
.625
.625
.625
.625
.625
.625
.625
.625
.625
Load Rating
lbf
Dynamic
Static
3850
3850
4100
4100
4250
4250
6600
6600
6700
6700
6900
6900
7200
7200
7300
7300
7700
5600
5600
6700
6700
7300
7300
12200
12200
13100
13100
14000
14000
15700
15700
16600
16600
18300
A1
Max.*
Speed
.531
.594
.656
.719
.781
.844
.906
.969
1.031
1.094
1.156
1.219
1.281
1.344
1.406
1.469
1.531
7000
7000
6000
6000
5500
5500
4100
4100
3800
3800
3600
3600
3200
3200
3000
3000
2800
rpm
8
9
10
11
12
13
* Speed limit shown is for oil lubrication.
14
15
5-91
16
THRUST BEARINGS STAINLESS STEEL

MATERIAL:
Balls - 440C Stainless Steel, Hardened to Rc 58-65

Retainer - Molded Nylon, for 250F Max.
Washer - 410 Stainless Steel, Hardened to Rc 38-42
Inch
T
B
A
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
D
C
INCH COMPONENT
(Complete Bearing Set)
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
7Z
7Z
7Z
7Z
7Z
7Z
7Z
7Z
7Z
7Z
7Z
7Z
7Z
7Z
7Z
7Z
7Z
7Z
7-012ST
7-018ST
7-025ST
7-031ST
7-037ST
7-043ST
7-050ST
7-056ST
7-062ST
7-068ST
7-075ST
7-081ST
7-087ST
7-093ST
7-100ST
7-112ST
7-125ST
7-150ST
Catalog Number Ref.

A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
7Z
7Z
7Z
7Z
7Z
7Z
7Z
7Z
7Z
7Z
7Z
7Z
7Z
7Z
7Z
7Z
7Z
7Z
7-012ST
7-018ST
7-025ST
7-031ST
7-037ST
7-043ST
7-050ST
7-056ST
7-062ST
7-068ST
7-075ST
7-081ST
7-087ST
7-093ST
7-100ST
7-112ST
7-125ST
7-150ST
B Dia.
A Dia.
Catalog Number
Bore
Tolerance
O.D.
Tolerance
1/8
3/16
1/4
5/16
3/8
7/16
1/2
9/16
5/8
11/16
3/4
13/16
7/8
15/16
1
1-1/8
1-1/4
1-1/2
.128 .133
.191 .195
.253 .258
.316 .321
.378 .383
.441 .446
.503 .508
.566 .571
.628 .635
.691 .698
.753 .760
.816 .823
.878 .885
.941 .950
1.003 1.012
1.128 1.137
1.253 1.262
1.503 1.512
7/16
1/2
9/16
5/8
13/16
7/8
15/16
1
1-1/8
1-3/16
1-1/4
1-5/16
1-3/8
1-9/16
1-5/8
1-3/4
1-7/8
2-1/8
.430 .437
.492 .499
.555 .562
.617 .624
.805 .812
.867 .874
.930 .937
.992 .999
1.115 1.124
1.178 1.187
1.240 1.249
1.303 1.312
1.365 1.374
1.551 1.562
1.613 1.624
1.738 1.749
1.863 1.874
2.113 2.124
Load Rating
No.
of
Balls
Size
of Balls
.0001
15 rpm
100 rpm
6
7
8
9
6
7
8
9
6
7
8
9
10
9
10
12
14
14
.0938
.0938
.0938
.0938
.1250
.1250
.1250
.1250
.1563
.1563
.1563
.1563
.1563
.1875
.1875
.1875
.1875
.1875
84
88
92
95
123
133
140
149
175
191
205
220
196
268
321
352
381
365
44
48
49
40
65
70
74
79
93
101
108
116
122
143
170
187
202
194
lbf
C
Ball
Circle
Dia.
9/32
11/32
13/32
15/32
19/32
21/32
23/32
25/32
7/8
15/16
1
1-1/16
1-1/8
1-1/4
1-5/16
1-7/16
1-9/16
1-13/16
Thk.
.050
.050
.050
.050
.062
.062
.062
.062
.093
.093
.093
.093
.093
.125
.125
.125
.125
.125
.002
.002
.002
.002
.002
.002
.002
.002
.003
.003
.003
.003
.003
.005
.005
.005
.005
.005
.190 .196
.190 .196
.190 .196
.190 .196
.254 .253
.254 .253
.254 .253
.254 .253
.336 .348
.336 .348
.336 .348
.336 .348
.336 .348
.427 .447
.427 .447
.427 .447
.427 .447
.427 .447
Additional Bearing Components

Used on Complete Thrust Bearing
Retainer & Balls
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
7M
7M
7M
7M
7M
7M
7M
7M
7M
7M
7M
7M
7M
7M
7M
7M
7M
7M
NOTE: Load rating @ 900 rpm approximately 50% of those @ 100 rpm. Other data available.
5-92
E
Total
Tolerance Bearing
Thickness
D Washer
7-012ST
7-018ST
7-025ST
7-031ST
7-037ST
7-043ST
7-050ST
7-056ST
7-062ST
7-068ST
7-075ST
7-081ST
7-087ST
7-093ST
7-100ST
7-112ST
7-125ST
7-150ST
Washer
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
7Y
7Y
7Y
7Y
7Y
7Y
7Y
7Y
7Y
7Y
7Y
7Y
7Y
7Y
7Y
7Y
7Y
7Y
7-012
7-018
7-025
7-031
7-037
7-043
7-050
7-056
7-062
7-068
7-075
7-081
7-087
7-093
7-100
7-112
7-125
7-150
THRUST BEARINGS STEEL

MATERIAL:
Balls - S.A.E 1018 Steel, Hardened to Rc 60 Min.

Retainer - Molded Nylon, for 250F Max.
Washer - CR1075 Steel, Hardened to Rc 59-61
R
Inch
B
A
1
E
D
C

A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
7Z
7Z
7Z
7Z
7Z
7Z
7Z
7Z
7Z
7Z
7Z
7Z
7Z
7Z
7Z
7Z
7Z
7Z
7- 012
7-018
7-025
7-031
7-037
7-043
7-050
7-056
7-062
7-068
7-075
7-081
7-087
7-093
7-100
7-112
7-125
7-150
Catalog Number Ref.

A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
7Z
7Z
7Z
7Z
7Z
7Z
7Z
7Z
7Z
7Z
7Z
7Z
7Z
7Z
7Z
7Z
7Z
7Z
7- 012
7-018
7-025
7-031
7-037
7-043
7-050
7-056
7-062
7-068
7-075
7-081
7-087
7-093
7-100
7-112
7-125
7-150
A Dia.
Bore
Tolerance
O.D.
Tolerance
1/8
3/16
1/4
5/16
3/8
7/16
1/2
9/16
5/8
11/16
3/4
13/16
7/8
15/16
1
1-1/8
1-1/4
1-1/2
.128 .133
.191 .195
.253 .258
.316 .321
.378 .383
.441 .446
.503 .508
.566 .571
.628 .635
.691 .698
.753 .760
.816 .823
.878 .885
.941 .950
1.003 1.012
1.128 1.137
1.253 1.262
1.503 1.512
7/16
1/2
9/16
5/8
13/16
7/8
15/16
1
1-1/8
1-3/16
1-1/4
1-5/16
1-3/8
1-9/16
1-5/8
1-3/4
1-7/8
2-1/8
.430 .437
.492 .499
.555 .562
.617 .624
.805 .812
.867 .874
.930 .937
.992 .999
1.115 1.124
1.178 1.187
1.240 1.249
1.303 1.312
1.365 1.374
1.551 1.562
1.613 1.624
1.738 1.749
1.863 1.874
2.113 2.124
No.
of
Balls
Size
of Balls
6
7
8
9
6
7
8
9
6
7
8
9
10
9
10
12
14
14
.0938
.0938
.0938
.0938
.1250
.1250
.1250
.1250
.1563
.1563
.1563
.1563
.1563
.1875
.1875
.1875
.1875
.1875
.0001
Load Rating
lbf
15 rpm
120
126
131
136
175
190
201
213
251
273
293
314
328
384
459
504
545
522
100 rpm
63
70
69
72
93
101
106
113
133
145
155
166
174
204
243
267
289
277
C
Ball
Circle
Dia.
2
3
INCH COMPONENT
Catalog Number
E
Total
Tolerance Bearing
Thickness
D Washer
Thk.
9/32
11/32
13/32
15/32
19/32
21/32
23/32
25/32
7/8
15/16
1
1-1/16
1-1/8
1-1/4
1-5/16
1-7/16
1-9/16
1-13/16
.050
.050
.050
.050
.062
.062
.062
.062
.093
.093
.093
.093
.093
.125
.125
.125
.125
.125
.002
.002
.002
.002
.002
.002
.002
.002
.003
.003
.003
.003
.003
.005
.005
.005
.005
.005
.190 .196
.190 .196
.190 .196
.190 .196
.254 .253
.254 .253
.254 .253
.254 .253
.336 .348
.336 .348
.336 .348
.336 .348
.336 .348
.427 .447
.427 .447
.427 .447
.427 .447
.427 .447
Additional Bearing Components

Used on Complete Thrust Bearing
Retainer & Balls
A 7M 7-012
A 7M 7-018
A 7M 7-025
A 7M 7-031
A 7M 7-037
A 7M 7-043
A 7M 7-050
A 7M 7-056
A 7M 7-062
A 7M 7-068
A 7M 7-075
A 7M 7-081
A 7M 7-087
A 7M 7-093
A 7M 7-100
A 7M 7-112
A 7M 7-125
A 7M 7-150
Washer
A 7Q 7-012
A 7Q 7-018
A 7Q 7-025
A 7Q 7-031
A 7Q 7-037
A 7Q 7-043
A 7Q 7-050
A 7Q 7-056
A 7Q 7-062
A 7Q 7-068
A 7Q 7-075
A 7Q 7-081
A 7Q 7-087
A 7Q 7-093
A 7Q 7-100
A 7Q 7-112
A 7Q 7-125
A 7Q 7-150
NOTE: Load rating @ 900 rpm approximately 50% of those @ 100 rpm. Other data available.
5-93
4
5
6
7
8
9
10
11
12
13
14
15
16
I
R
THRUST WASHERS GENERAL PURPOSE POLYMER

ECONOMICAL
ISO 3547-1
MATERIAL:
T
1
2
3
4
Inch
G300 Polymer
Intermittent: +428F

FEATURES:

Maintenance-free.
Dry running.
High wear resistance.
Resistant to dust and dirt.
Vibration damping.
SPECIFICATIONS:
Tensile Strength at 68 F: 30,400 psi
O.D.
I.D.
Compressive Strength: 11,300 psi

Coefficient of Friction (dynamic against steel): .08 .15
PV Value, max. (dry): 12,000 psi x fpm
D1
Other sizes available upon request.
5
6
7
8
9
INCH COMPONENT
O.D.
+.010
-.000
+.000
-.010
S99GGT-038063040
S99GGT-050088059
S99GGT-063113059
S99GGT-075125059
S99GGT-088150059
S99GGT-100175059
.375
.500
.625
.750
.875
1.000
.625
.875
1.125
1.250
1.500
1.750
* No hole
10
11
12
13
14
15
16
I.D.
Catalog Number
5-94
T
Thickness
+.000
-.002
.0400
.0585
.0585
.0585
.0585
.0585
D
Dia.
d
Dia.
D1
.005
+.015
+.005
+.008
-.000
+.005
-.000
*
.692
.880
1.005
1.192
1.380
*
.067
.099
.099
.130
.130
*
.040
.040
.040
.040
.040
.625
.875
1.125
1.250
1.500
1.750
THRUST WASHERS HIGH-TEMPERATURE POLYMER

HIGH LOAD
HIGH-SPEED
MATERIAL:
Inch
T500 Polymer
Intermittent: +599F

T
1
FEATURES:
High compression.
Chemical-resistant.
Very low moisture absorption.
Great wear resistance.
SPECIFICATIONS:
Tensile Strength at 68 F: 24,600 psi
Compressive Strength: 14,500 psi

Coefficient of Friction (dynamic against steel): .090 .270
PV Value, max. (dry): 37,700 psi x fpm
O.D.
I.D.
D
D1
5
INCH COMPONENT
I.D.
O.D.
Catalog Number
+.010
-.000
+.000
-.010
S99GTT-050088059
S99GTT-063113059
S99GTT-075125059
S99GTT-088138059
S99GTT-088150059
S99GTT-100175059
S99GTT-113163059
S99GTT-125213059
S99GTT-175275059
S99GTT-200300090
.500
.625
.750
.875
.875
1.000
1.125
1.250
1.750
2.000
.875
1.125
1.250
1.375
1.500
1.750
1.625
2.125
2.750
3.000
T
Thickness
+.000
-.002
.0585
.0585
.0585
.0585
.0585
.0585
.0585
.0585
.0585
.0895
D
Dia.
.005
.692
.880
1.005
1.125
1.192
1.380
*
1.692
2.255
2.505
d
Dia.
+.015
+.005
.067
.099
.099
.130
.130
.130
*
.161
.192
.192
D1
+.008
-.000
+.005
-.000
.040
.040
.040
.040
.040
.040
*
.040
.040
.040
.875
1.125
1.250
1.375
1.500
1.750
1.625
2.125
2.750
3.000
* No hole
6
7
8
9
10
11
12
13
14
15
5-95
16
THRUST WASHERS INDUSTRIAL GRADE POLYMER

MATERIAL:
M250 Polymer
Inch
-40F to +176F
SHORT-TERM TEMPERATURE:
+338F Max.
1
2
SPECIFICATIONS:
Tensile Strength: at 68F (16240 psi)
Coefficient of friction, dynamic against steel: 0.1-0.3
3
T
4
I.D.
O.D.
6
7
INCH COMPONENT
8
9
10
11
Catalog Number
S99GMT-025062090
S99GMT-031069080
S99GMT-038075090
S99GMT-050082090
S99GMT-063100094
S99GMT-075106094
S99GMT-100150125
S99GMT-125214098
S99GMT-150250125
12
13
14
15
16
5-96
Nom.
I.D.
1/4
5/16
3/8
1/2
5/8
3/4
1
1-1/4
1-1/2
I.D.
O.D.
Max.
Min.
Max.
Min.
.2609
.3271
.3850
.5101
.6371
.7675
1.0200
1.2998
1.6000
.2550
.3189
.3780
.5030
.6300
.7600
1.0100
1.2900
1.5500
.6200
.6874
.7409
.8200
1.0000
1.0630
1.5000
2.1400
2.6000
.6094
.6767
.7394
.8070
.9870
1.0500
1.4843
2.1220
2.5500
.0900
.0900
.0900
.0900
.0940
.0940
.1250
.0980
.1250
FRELON LINED PILLOW BLOCKS

CLOSED SERIES
SELF-ALIGNING
LOW COST
R
Inch
MATERIAL:
Body - Anodized 6061-T6 Aluminum

Bearing - Frelon Lined Aluminum, Self-Lubricating
-400F to +500F
SPECIFICATIONS:
Bore Tolerance for PRECISION (P):

.250 to 1.250 +.001/-.000
Bore Tolerance for STANDARD (S):
.250 to 1.250 +.003/+.002
3
G
For parallel shaft applications,

use Standard (S version) bearings.
4
D
K
A
INCH COMPONENT
CATALOG NUMBER
S61P CF
F
SECTION A-A
DISTANCE BETWEEN
BOLTS, CENTER-TO-CENTER
Catalog Number
Bore
S61P
S61P
S61P
S61P
S61P
S61P
S61P
.250
.375
.500
.625
.750
1.000
1.250
S61P
S61P
S61P
S61P
S61P
S61P
S61P
CM08F032
CM10F036
CM12F039
CM16F043
CM20F054
CM25F067
CM30F079
S Standard
Catalog Number
(Ref.)
P Precision
C-025F11875
C-038F13125
C-050F16875
C-063F19375
C-075F20625
C-100F28125
C-125F36250
.001
.437
.500
.687
.875
.937
1.187
1.500
B
Base
Width
C
Length
D
Height
.01
.01
1.625
1.750
2.000
2.500
2.750
3.250
4.000
1.188
1.313
1.688
1.938
2.063
2.813
3.625
.813
.938
1.250
1.625
1.750
2.188
2.813
1.312
1.437
1.688
2.125
2.375
2.875
3.500
.750
.875
1.000
1.125
1.250
1.750
2.000
M
Groove
Spacing
Max.*
Load
Rating
.188
.188
.250
.281
.313
.375
.438
.750
.875
1.125
1.438
1.563
1.938
2.500
.750
.875
1.250
1.500
1.625
2.250
2.625
G
Body
Width
Bolt
Hole
1.000
1.125
1.375
1.750
1.875
2.375
3.000
#6
#6
#6
#8
#8
#10
#10
5/32
5/32
5/32
3/16
3/16
7/32
7/32
lbf
300
510
975
1470
1905
3525
5145
* Maximum speed is 400 ft/min.; maximum PV is 10000 dry.
7
8
9
10
11
12
13
14
15
5-97
16
I
R
T
1
2
3
4
FRELON LINED PILLOW BLOCKS

OPEN SERIES
SELF-ALIGNING
LOW COST
Inch
MATERIAL:
Body - Anodized 6061-T6 Aluminum

Bearing - Frelon Lined Aluminum, Self-Lubricating
-400F to +500F
SPECIFICATIONS:
Bore Tolerance for PRECISION (P):
.500 to 1.250 +.001/-.000
Bore Tolerance for STANDARD (S):
.500 to 1.250 +.003/+.002
H
G
60
For parallel shaft applications,

use Standard (S version) bearings.
MIN.
GAP
D
K
A
7
8
DISTANCE BETWEEN BOLTS, CENTER-TO-CENTER
P Precision
S Standard
Bore
11
S61P
S61P
S61P
S61P
S61P
Z-050F16875
Z-063F19375
Z-075F20625
Z-100F28125
Z-125F36250
.500
.625
.750
1.000
1.250
12
Catalog Number
(Ref.)
13
S61P
S61P
S61P
S61P
S61P
Z-050F16875
Z-063F19375
Z-075F20625
Z-100F28125
Z-125F36250
1.438
1.813
1.938
2.438
3.125
.001
.687
.875
.937
1.187
1.500
B
Base
Width
C
Length
D
Min.
.01
.01
2.000
2.500
2.750
3.250
4.000
1.50
1.75
1.88
2.63
3.38
.313
.375
.438
.563
.625
1.688
2.125
2.375
2.875
3.500
1.000
1.125
1.250
1.750
2.000
I
Bolt
Hole
#6
#8
#8
#10
#10
5/32
3/16
3/16
7/32
7/32
5-98
K
Height
M
Groove
Spacing
.250
.281
.313
.375
.438
1.125
1.438
1.563
1.938
2.500
1.250
1.500
1.625
2.250
2.625
* Maximum speed is 400 ft/min.; maximum PV is 10000 dry.

Maximum load must be reduced by 1/2 when load is applied to the open half of the bearing.
15
16
F
SECTION A-A
Catalog Number
14
CATALOG NUMBER
DESIGNATION
S61P ZF
9
10
G
Body
Width
1.375
1.750
1.875
2.375
3.000
Max.*
Load
Rating
lbf
975
1470
1905
3525
5145
PILLOW BLOCK-MOUNTED BALL BEARINGS MINIATURE

ABEC 3
DOUBLE-SHIELDED
CORROSION RESISTANT
LIGHTWEIGHT
LUBRICATED FOR THE LIFE OF THE
BEARING
MEDICAL, SCIENTIFIC & PHARMACEUTICAL
APPLICATIONS
R
Inch
T
1
MATERIAL:
Bearing - Stainless Steel

Pillow Block - Sintered Aluminum
B
D
-22F to +248F
G
W
d
F
5
NEW
INCH COMPONENT
Catalog Number
A
A
A
A
A
7Z29-XS125
7Z29-XS 188
7Z29-XS250
7Z29-XS313
7Z29-XS375
Catalog Number
(Ref.)
A
A
A
A
A
7Z29-XS125
7Z29-XS188
7Z29-XS250
7Z29-XS313
7Z29-XS375
d
Shaft
Dia.
A
Overall
Height
B
Overall
Length
C
Overall
Width
D
Mounting
Length
.1250
.1875
.2500
.3125
.3750
.75
.75
.75
.75
1.13
1.44
1.44
1.44
1.44
2.25
.2
.2
.2
.2
.4
1.125
1.125
1.125
1.125
1.750
F
Height to
Centerline
.001
.3750
.3750
.3750
.3750
.5625
E
Nominal
Flange
Thickness
.20
.20
.20
.20
.25
7
8
9
G
Mounting
Hole
Dia.
W
Housing
Width
Max.
Speed
Max.
Radial Load
10
.125
.125
.125
.125
.203
.750
.750
.750
.750
1.125
56000
43000
40000
40000
40000
150
310
256
128
450
11
rpm
lbf
12
13
14
15
5-99
16
I
R
PILLOW BLOCK-MOUNTED SINTERED BRONZE BEARINGS

SELF-ALIGNING TO 5
SELF-LUBRICATING
CORROSION-RESISTANT
LIGHTWEIGHT
Inch
MATERIAL:
Bearing - Sintered Bronze SAE 840

-20F to +200F
I.D.
D
B
7
8
9
10
11
12
13
INCH COMPONENT
Catalog Number
A
A
A
A
A
A
A
A
7Z31-PB0250B
7Z31-PB0312B
7Z31-PB0375B
7Z31-PB0500B
7Z31-PB0625B
7Z31-PB0750B
7Z31-PB0875B
7Z31-PB1000B
Catalog Number
(Ref.)
A
A
A
A
A
A
A
A
7Z31-PB0250B
7Z31-PB0312B
7Z31-PB0375B
7Z31-PB0500B
7Z31-PB0625B
7Z31-PB0750B
7Z31-PB0875B
7Z31-PB1000B
14
15
16
5-100
Nom.
I.D.
1/4
5/16
3/8
1/2
5/8
3/4
7/8
1
D
Mounting
Distance
1-3/4
1-3/4
1-3/4
1-3/4
2-1/2
2-1/2
3-1/8
4
I.D. Actual
Max.
.2513
.3140
.3765
.5017
.6270
.7520
.8780
1.0030
Min.
.2508
.3133
.3758
.5010
.6260
.7510
.8760
1.0010
E
Nominal
Flange
Thickness
F
Height To
Centerline
1/4
1/4
1/4
1/4
5/16
5/16
13/32
9/16
9/16
9/16
9/16
9/16
3/4
3/4
1
1-1/4
A
Overall
Height
B
Overall
Length
C
Overall
Width
1-1/8
1-1/8
1-1/8
1-1/8
1-15/16
1-9/16
1-15/16
2-9/16
2-1/4
2-1/4
2-1/4
2-1/4
3-1/4
3-1/4
4
5
3/8
7/16
7/16
5/8
25/32
7/8
29/32
29/32
Max.
Speed
Max.
Radial
Load
G
Mounting
Hole
Dia.
9/32
9/32
9/32
9/32
11/32
11/32
11/32
9/16
rpm
15270
12240
10180
7640
6110
5090
4850
4500
lbf
210
210
220
220
380
330
380
1000
PILLOW BLOCK-MOUNTED PTFE BRONZE BEARINGS

SELF-ALIGNING TO 5
SELF-LUBRICATING
CORROSION-RESISTANT
LIGHTWEIGHT
R
Inch
MATERIAL:
Bearing - Porous Sintered Bronze with

PTFE Solid Lubricant Impregnant
T
1
-330F to +540F
2
5
4
I.D.
A
G
E
D
B
INCH COMPONENT
Catalog Number
A
A
A
A
A
A
A
7Z32-PB0250P
7Z32-PB0312P
7Z32-PB0375P
7Z32-PB0500P
7Z32-PB0625P
7Z32-PB0750P
7Z32-PB1000P
Catalog Number
(Ref.)
A
A
A
A
A
A
A
7Z32-PB0250P
7Z32-PB0312P
7Z32-PB0375P
7Z32-PB0500P
7Z32-PB0625P
7Z32-PB0750P
7Z32-PB1000P
Nom.
I.D.
1/4
5/16
3/8
1/2
5/8
3/4
1
D
Mounting
Distance
1-3/4
1-3/4
1-3/4
2-1/2
2-1/2
2-1/2
4
Recommended
Shaft Diameter
Max.
.2490
.3115
.3740
.4990
.6240
.7491
.9991
Min.
.2481
.3106
.3731
.4980
.6230
.7479
.9979
E
Nominal
Flange
Thickness
F
Height To
Centerline
1/4
1/4
1/4
5/16
5/16
5/16
9/16
9/16
9/16
9/16
3/4
3/4
3/4
1-1/4
A
Overall
Height
B
Overall
Length
C
Overall
Width
1-1/8
1-1/8
1-1/8
1-9/16
1-9/16
1-9/16
2-9/16
2-1/4
2-1/4
2-1/4
3-1/4
3-1/4
3-1/4
5
7/16
7/16
5/8
25/32
7/8
7/8
29/32
Max.
Speed
Max.
Radial
Load
G
Mounting
Hole
Dia.
9/32
9/32
9/32
11/32
11/32
11/32
9/16
rpm
6020
4820
4010
3010
2410
2010
1500
lbf
210
210
210
380
330
330
1000
8
9
10
11
12
13
14
15
5-101
16
I
R
PILLOW BLOCK-MOUNTED NEEDLE ROLLER BEARINGS

SELF-ALIGNING TO 5
SELF-LUBRICATING
CORROSION-RESISTANT
LIGHTWEIGHT
Inch
MATERIAL:
Bearing - Drawn Cup Needle Roller

-22F to +212F
2
3
4
5
I.D.
G
E
D
7
8
INCH COMPONENT
Catalog Number
9
10
11
12
13
A
A
A
A
A
A
7Z33-PB250N
7Z33-PB312N
7Z33-PB375N
7Z33-PB500N
7Z33-PB625N
7Z33-PB750N
Catalog Number
(Ref.)
A
A
A
A
A
A
7Z33-PB250N
7Z33-PB312N
7Z33-PB375N
7Z33-PB500N
7Z33-PB625N
7Z33-PB750N
14
15
16
5-102
Nom.
I.D.
1/4
5/16
3/8
1/2
5/8
3/4
D
Mounting
Distance
1-3/4
1-3/4
1-3/4
2-1/2
2-1/2
4
Recommended
Shaft Diameter
Max.
.2500
.3125
.3750
.5000
.6500
.7500
Min.
.2495
.3120
.3745
.4995
.6245
.7495
E
Nominal
Flange
Thickness
F
Height To
Centerline
1/4
1/4
1/4
5/16
5/16
9/16
9/16
9/16
9/16
3/4
3/4
1-1/4
A
Overall
Height
B
Overall
Length
C
Overall
Width
1-1/8
1-1/8
1-1/8
1-9/16
1-9/16
2-9/16
2-1/4
2-1/4
2-1/4
3-1/4
3-1/4
5
7/16
5/8
5/8
25/32
7/8
29/32
Max.
Speed
Max.
Radial
Load
G
Mounting
Hole
Dia.
9/32
9/32
9/32
11/32
11/32
9/16
rpm
44000
35000
29500
22000
17600
14700
lbf
210
210
220
380
330
1000
PILLOW BLOCK BEARINGS

MAINTENANCE-FREE
SELF-LUBRICATING
LIGHTWEIGHT
COMPENSATES FOR ALIGNMENT ERRORS
R
Inch
MATERIAL:
Body - Thermoplastic
Ball - L280 Polymer
T
1
-40F to +194F
SPECIFICATION:
Bore Tolerance:
.2500 to .3750 +.0030/+.0010
.5000 & .6250 +.0040/+.0013
.7500 & 1.0000 +.0049/+.0016
H
C
For additional information concerning

the bearing material, see page 5-110.
3
4
H1
BORE
5
K
E
B
INCH COMPONENT
Catalog Number
Bore
H1
S61GPB-025038
S61GPB-031044
S61GPB-038050
S61GPB-050063
S61GPB-063075
S61GPB-075088
S61GPB-100138
.2500
.3125
.3750
.5000
.6250
.7500
1.0000
.705
.824
1.022
1.191
1.409
1.687
2.163
.39
.43
.55
.60
.70
.86
1.10
.375
.437
.500
.625
.750
.875
1.375
.250
.312
.359
.453
.484
.593
1.005
1.75
1.95
2.40
2.80
3.35
3.75
5.00
1.25
1.35
1.80
2.00
2.30
2.70
3.50
.137
.150
.180
.205
.205
.270
.520
.25
.28
.30
.38
.47
.53
.68
Catalog Number
(Ref.)
Max.
Angle of
Pivot
S61GPB-025038
S61GPB-031044
S61GPB-038050
S61GPB-050063
S61GPB-063075
S61GPB-075088
S61GPB-100138
25
25
22
22
22
22
20
Max. Static Tensile Strength

Short-Term
lbf
135
180
225
270
472
697
1214
Long-Term
lbf
67
90
112
135
236
348
607
Maximum Torque for

Longitudinal Holes
lbf ft.
.4
.6
1.0
1.8
1.8
3.3
7.7
9
10
11
12
13
14
15
5-103
16
I
R
T
1
2
WASHDOWN PILLOW BLOCK BEARINGS

MAINTENANCE-FREE
CORROSION RESISTANT
FDA COMPLIANT
SELF ALIGNING 5
LOW COST
FOOD, DAIRY, PHARMACEUTICAL &
MARINE APPLICATIONS
Inch
MATERIAL:
Bearing - Acetal or
Acetal with PTFE added
Bearing Housing - Stainless Steel
Housing - Electroless Nickel Plated Aluminum
3
5
NEW5
d
G
E
D
B
8
9
10
11
12
13
14
15
16
INCH COMPONENT
Catalog Number
A
A
A
A
A
A
A
A
7Z25-PB2575
7Z25-PB2511
7Z25-PB3111
7Z25-PB3811
7Z25-PB5011
7Z25-PB5016
7Z25-PB6316
7Z25-PB7516
Catalog Number
(Ref.)
A
A
A
A
A
A
A
A
7Z25-PB2575
7Z25-PB2511
7Z25-PB3111
7Z25-PB3811
7Z25-PB5011
7Z25-PB5016
7Z25-PB6316
7Z25-PB7516
d
Shaft Dia.
+.002
-.000
.2510
.2510
.3135
.3760
.5010
.5010
.6260
.7510
E
Nominal
Flange
Thickness
.188
.250
.250
.250
.250
.310
.310
.310
A
Overall
Height
B
Overall
Length
C
Overall
Width
D
Mounting
Length
.75
1.13
1.13
1.13
1.13
1.56
1.56
1.56
1.4375
2.2500
2.2500
2.2500
2.2500
3.2500
3.2500
3.2500
.38
.38
.44
.44
.63
.78
.78
.88
1.125
1.750
1.750
1.750
1.750
2.500
2.500
2.500
F
Height to
Centerline
G
Mounting
Hole
Dia.
Max.
Speed
Max.
Radial Load
1503
1503
1205
1002
752
752
601
501
91
91
129
155
216
308
380
332
.375
.560
.560
.560
.560
.750
.750
.750
.203
.280
.280
.280
.280
.340
.340
.340
NOTE: For PTFE-added bearings, add an "F" to the end of the catalog number.
5-104
rpm
lbf
WASHDOWN FLANGE-MOUNTED BEARINGS

MAINTENANCE-FREE
CORROSION-RESISTANT
FDA COMPLIANT
SELF-ALIGNING 5
LOW COST
FOOD, DAIRY, PHARMACEUTICAL &
MARINE APPLICATIONS
R
Inch
T
1
MATERIAL:
Bearing - Acetal or
Acetal with PTFE added
Bearing Housing - Stainless Steel
Housing - Electroless Nickel Plated Aluminum
2
3
d
5
NEW
D
B
5
F
A
INCH COMPONENT
Catalog Number
A
A
A
A
A
A
A
7Z26-FB2538
7Z26-FB3144
7Z26-FB3844
7Z26-FB5063
7Z26-FB5078
7Z26-FB6378
7Z26-FB7588
Catalog Number
(Ref.)
A
A
A
A
A
A
A
7Z26-FB2538
7Z26-FB3144
7Z26-FB3844
7Z26-FB5063
7Z26-FB5078
7Z26-FB6378
7Z26-FB7588
d
Shaft Dia.
+.002
-.000
.2510
.3135
.3760
.5010
.5010
.6260
.7510
E
Nominal
Flange
Thickness
.19
.19
.19
.19
.25
.25
.25
A
Overall
Height
B
Overall
Length
C
Overall
Width
D
Mounting
Length
.38
.44
.44
.63
.78
.78
.88
1.63
2.25
2.25
2.25
3.25
3.25
3.25
.75
1.13
1.13
1.13
1.63
1.63
1.63
1.25
1.75
1.75
1.75
2.50
2.50
2.50
F
Mounting
Hole Dia.
Max.
Speed
Max.
Radial Load
.17
.28
.28
.28
.41
.41
.41
1503
1205
1002
752
752
601
501
91
129
155
308
308
436
625
rpm
9
10
11
12
lbf
NOTE: For PTFE-added bearings, add an "F" to the end of the catalog number.
13
14
15
5-105
16
I
R
T
DIE CAST BEARING BLOCKS

PLAIN BEARING
FLANGED BEARING
NO BEARING
Inch
MATERIAL:
Housing - Zinc Die Cast

Bearing - Sintered Bronze, Oiled
1
2
3
Fig. 1
C
1-1/2
3/4
3/16
3/4
Fig. 2
7/16
8
9
INCH COMPONENT
Catalog Number
10
11
12
13
14
15
16
.437
3/16
Without Bearing
A 7Z 4-31
A 7Z 4-37
A 7Z 4-50
Catalog Number
Fig. 1 With Plain Bearing
A 7Z 4-P2406
A 7Z 4-P2408
A 7Z 4-P2410
A 7Z 4-P2412
Fig. 2 With Flanged Bearing
A 7Z 4-F2606
A 7Z 4-F2608
A 7Z 4-F2610
A 7Z 4-F2612
5-106
2-7/32
C
Bore
+.001
-.000
.312
.375
.500
B
Bore
+.002
-.000
3/16
1/4
5/16
3/8
3/16
1/4
5/16
3/8
NONMETALLIC BEARING BLOCKS

MOLDED
WITH FLANGED BEARING
R
Inch
MATERIAL:
Body - Nylon 101, Molded

Bearing - Ertalyte TX, Machined
FEATURES:
Self-lubricating.
Low cost.
High-performance.
Electrically insulated.
1
2
1.11
5/16 R
5/16
5/8
3/4
1/16
1/16 R
17/64
2 HOLES
1-1/2
1/8 R
2-7/32
3/8 R
11/32
BORE
8
INCH COMPONENT
Catalog Number
A
A
A
A
7Z
7Z
7Z
7Z
6-F2206E
6-F2208E
6-F2210E
6-F2212E
9
Bore
+.002
-.000
10
3/16
1/4
5/16
3/8
11
12
13
14
15
5-107
16
I
R
T
MALE PLASTIC ROD END BEARINGS

MAINTENANCE-FREE
SELF-LUBRICATING
LIGHTWEIGHT
AND EDGE LOADS
Inch
MATERIAL:
Ball - L280 Polymer
2
3
4
-40F to +194F
SPECIFICATION:
Bore Tolerance:
.2500 to .3750 +.0033/+.0010
.5000 & .6250 +.0040/+.0013
.7500 +.0049/+.0016
W
H
For additional information concerning

the bearing material, see pages 5-110.
L
F
6
A
7
8
9
10
11
12
13
14
INCH COMPONENT
Catalog Number *
T
D
Dia. Thread
Size
Catalog Number
(Ref.)
S62GMR-025075
S62GMR-031088
S62GMR-038100
S62GMR-050131
S62GMR-063150
S62GMR-075175
5-108
1.937
2.313
2.438
3.094
3.375
3.750
Min.
Max. Max. Torque Max. Static Tensile
Max.
Thread Strength
Strength lbf
Angle Thread
Strength Through Ball
of Pivot Engmt.
Short-Term Long-Term
lbf ft.
in.
25
25
22
22
22
22
.700
.875
.875
1.050
1.137
1.226
lbf ft.
2.95
7.38
11.06
25.82
36.88
51.63
.74
1.48
2.21
6.64
8.85
18.44
202
247
337
562
186
876
Shaft Size
1.000
.2500
.750 1/4-28
.250
.365
1.562
S62GMR-025075
1.250
.3125
.875 5/16-24 .312
.437
1.875
S62GMR-031088
1.250
.3750
1.000 3/8-24
.359
.500
1.938
S62GMR-038100
1.500
.5000
1.312 1/2-20
.453
.625
2.428
S62GMR-050131
1.625
.6250
1.500 5/8-18
.484
.750
2.625
S62GMR-063150
1.750
.7500
1.750 3/4-16
.593
.875
2.875
S62GMR-075175
*To complete Catalog Number, specify R for Right-Hand Thread and L for Left-Hand Thread.
15
16
B
Bore
101
123
168
281
393
438
Max.
Min.
.2500
.3125
.3750
.5000
.6250
.7500
.2485
.3110
.3735
.4983
.6233
.7479
Max. Radial
Load lbf
Short-Term Long-Term
22
33
78
101
134
224
11
16
39
50
67
112
FEMALE PLASTIC ROD END BEARINGS

MAINTENANCE-FREE
SELF-LUBRICATING
LIGHTWEIGHT
AND EDGE LOADS
R
Inch
MATERIAL:
Balls - L280 Polymer
-40F to +194F
SPECIFICATIONS:
Bore Tolerance:
.2500 to .3750 +.0033/+.0010
.5000 & .6250 +.0040/+.0013
.7500 & 1.0000 +.0049/+.0016
W
H

4
B
L
F
5
6
7
T
M
K
INCH COMPONENT
Catalog Number *
T
B
D
Bore Dia. Thread
Size
S62GFR-025075
.2500 .750 1/4-28 .469 .272 .365 1.312 .687
S62GFR-031088
.3125 .875 5/16-24 .500 .340 .437 1.375 .687
S62GFR-038100
.3750 1.000 3/8-24 .687 .394 .500 1.625 .812
S62GFR-050131
.5000 1.312 1/2-20 .875 .487 .625 2.125 1.062
S62GFR-063150
.6250 1.500 5/8-18 1.000 .545 .750 2.500 1.375
S62GFR-075175
.7500 1.750 3/4-16 1.125 .676 .875 2.875 1.562
S62GFR-100275R
1.0000 2.750 1-12 1.625 1.000 1.375 4.125 2.125
* To complete Catalog Number, specify R for Right-Hand Thread or L for Left-Hand Thread.
Catalog Number
(Ref.)
S62GFR-025075
S62GFR-031088
S62GFR-038100
S62GFR-050131
S62GFR-063150
S62GFR-075175
S62GFR-100275R
1.687
1.813
2.125
2.781
3.250
3.750
5.500
Shaft Size
Wrench
Size Max. Min.
.375 .2500
.437 .3125
.562 .3750
.750 .5000
.875 .6250
1.000 .7500
1.500 1.0000
.2485
.3110
.3735
.4983
.6235
.7479
.9980
Max.
Max. Min. Thread
Angle Engagement Thread
Strength
of Pivot
in.
Short-Term
Long-Term
Short-Term
Long-Term
.480
.480
.568
.743
.962
1.093
1.488
248
383
450
585
1103
1260
1349
124
192
225
293
551
630
674
90
112
225
337
382
517
584
45
56
112
169
191
259
293
25
25
22
22
22
22
20
lbf ft.
3.68
4.42
5.16
16.96
22.12
29.50
33.92
Max. Static Tensile

Strength lbf
Max. Radial
Load lbf
9
10
11
12
13
14
15
5-109
16
PILLOW BLOCK & ROD END POLYMER

L280 POLYMER
.4
Inch
.3
.2
9.84
19.69
29.53
39.37
49.22
59.05
68.90
Surface Speed (fpm)

Graph 1: Coefficient of friction of L280 as
a result of the running speed; p = 108 psi, shaft made
of Cold Rolled Steel
3
4
5
6
.30
.25
.20
.15
.10
.05
.00
1450
2900
4350
5800
7250
8700
Load (psi)
Graph 2: Coefficient of friction of L280
8
14500
9
10
11
12
Load (psi)
1450
145
13
14
15
.197
19.69
197
Surface Speed (fpm)

Graph 3: Permissible p x v - values for L280 running dry against a steel shaft, at 68F.
15
16
1.97
5-110
1969
PRECISION BEARING HOUSINGS

MATERIAL:
Aluminum, Chromic Anodized
R
Inch
(2) #6-32 TAPPED HOLE OR

#26 CLEARANCE HOLE
1
Precision
Component
T
1
1/16 BOTH ENDS
(2) SPOT DRILLS FOR

DOWEL PINNING
A
1/4
D
E 1/4
+.0001
NOTE:
ONLY 2 GROOVES IN
3/4" LONG UNITS;
4 GROOVES IN ALL OTHERS
B -.0002
+.0001
B -.0002
Fig. 1
Single Hub
Fig. 2
Double Hub
INCH COMPONENT
Catalog Number
Clearance Hole
Fig. 1 Single Hub
S61AA3-SHH0612
S61AA3-SHH0616
S61AA3-SHH0624
S61AA3-SHH0812
S61AA3-SHH0816
S61AA3-SHH0824
S61AA3-SHH1012
S61AA3-SHH1016
S61AA3-SHH1024
Fig. 2 Double Hub
S61AA3-DHH0624
S61AA3-DHH0632
S61AA3-DHH0648
S61AA3-DHH0824
S61AA3-DHH0832
S61AA3-DHH0848
S61AA3-DHH1024
S61AA3-DHH1032
S61AA3-DHH1048
B
Dia.
A
Dia.
S61AA3-SHH0612T
S61AA3-SHH0616T
S61AA3-SHH0624T
S61AA3-SHH0812T
S61AA3-SHH0816T
S61AA3-SHH0824T
S61AA3-SHH1012T
S61AA3-SHH1016T
S61AA3-SHH1024T
.3750
.3750
.3750
.5000
.5000
.5000
.6250
.6250
.6250
3/4
1
1-1/2
3/4
1
1-1/2
3/4
1
1-1/2
3/4
3/4
3/4
7/8
7/8
7/8
15/16
15/16
15/16
1-1/2
1-1/2
1-1/2
1-5/8
1-5/8
1-5/8
1-3/4
1-3/4
1-3/4
.562
.562
.562
.625
.625
.625
.687
.687
.687
.187
.187
.187
.260
.260
.260
.260
.260
.260
S61AA3-DHH0624T
S61AA3-DHH0632T
S61AA3-DHH0648T
S61AA3-DHH0824T
S61AA3-DHH0832T
S61AA3-DHH0848T
S61AA3-DHH1024T
S61AA3-DHH1032T
S61AA3-DHH1048T
.3750
.3750
.3750
.5000
.5000
.5000
.6250
.6250
.6250
3/4
1
1-1/2
3/4
1
1-1/2
3/4
1
1-1/2
3/4
1
1-1/2
3/4
1
1-1/2
3/4
1
1-1/2
3/4
3/4
3/4
7/8
7/8
7/8
15/16
15/16
15/16
1-1/2
1-1/2
1-1/2
1-5/8
1-5/8
1-5/8
1-3/4
1-3/4
1-3/4
.562
.562
.562
.625
.625
.625
.687
.687
.687
.187
.187
.187
.260
.260
.260
.260
.260
.260
Tapped Hole
9
10
11
12
13
14
15
5-111
16
BEARING MOUNTING PLATES & HANGERS

BEARING MOUNTING PLATES
MATERIAL:
Cast Aluminum, Chromic Anodized
Inch
Anodized thread is optional.
1
2
.050
L
4
5
INCH COMPONENT
Catalog Number
Clearance Hole
7
8
9
S61PA1-BMP0604
S61PA1-BMP0805
S61PA1-BMP1005
Tapped Hole
S61PA1-BMP0604T
S61PA1-BMP0805T
S61PA1-BMP1005T
* (2) "T" TAPPED

OR CL. HOLES
Shaft
Size
1/8
3/16
1/4
B
Dia.
+.0001
-.0002
.3750
.5000
.6250
.875
1.250
1.375
3/4
7/8
1
1-3/16
1-5/8
1-3/4
.250
.312
.312
BEARING HANGERS MINIATURE

MATERIAL:
Cast Aluminum, Chromic Anodized

9/16
1/4
10
9/32
11
H
.3125 +.0002
-.0000
12
1/8
13
14
15
16
#6-32 X 3/16 DP.
INCH COMPONENT
H
Catalog Number
.001
S61HA2-MPH0512
S61HA2-MPH0516
S61HA2-MPH0520
S61HA2-MPH0524
3/4
1
1-1/4
1-1/2
5-112
T Holes *
Tap
Cl. Dr.
#2-56
#4-40
#6-32
#41
#31
#26
flange housings
Phone: 516.328.3300 Fax: 516.326.8827 www.sdp-si.com
ECONOMICAL
SUITABLE FOR ADDITIONAL MACHINING
CAN BE USED FOR A WIDE RANGE OF COMPONENTS
Inch
MATERIAL:
0
1
Sintered Aluminum
R
T
1
2
3
4
I.D.
F
D
NEW
A
B
7
8
inch Component
Catalog Number
A
A
A
A
A
7Z27-F050
7Z27-F063
7Z27-F081
7Z27-F125
7Z27-F158
I.D.
+.003
-.000
F
Dia.
.500
.625
.812
1.250
1.580
1.250
1.750
2.500
3.125
4.000
1.625
2.250
3.250
4.000
5.000
.750
1.125
1.625
1.875
2.625
3/8
7/16
5/8
5/8
29/32
.1875
.1875
.2500
.3125
.3750
11/64
9/32
13/32
13/32
9/16
9
10
11
12
13
14
15
5-113
Rev: 2-7-12 SS
16
I
R
T
PILLOW BLOCK HOUSINGS

ECONOMICAL
SUITABLE FOR ADDITIONAL MACHINING
CAN BE USED FOR A WIDE RANGE OF COMPONENTS
Inch
MATERIAL:
0
1
Sintered Aluminum
1
2
3
H
I.D.
NEW5
E
C
7
8
INCH COMPONENT
Catalog Number
9
10
A
A
A
A
A
7Z28-P038
7Z28-P050
7Z28-P081
7Z28-P125
7Z28-P158
11
12
13
14
15
16
5-114
I.D.
+.003
-.000
G
Dia.
.375
.500
.812
1.250
1.580
3/4
1-1/8
1-9/16
1-15/16
2-9/16
1-7/16
2-1/4
3-1/4
4
5
3/8
3/8
5/8
5/8
13/16
1-1/8
1-3/4
2-1/2
3-1/8
4
3/16
1/4
5/16
13/32
9/16
3/8
9/16
3/4
1
1-1/4
13/64
9/32
11/32
11/32
9/16
3/4
1-1/8
1-5/8
1-7/8
2-5/8
HARDENED STEEL BALLS & NYLON BALLS

HARDENED STEEL BALLS
Rc 55-62
Inch
MATERIAL:
52100 Chrome Steel or 440 Stainless Steel
SPECIFICATIONS:
Diameter tolerance:
52100 Chrome Steel is grade #25 .000025
440 Stainless Steel is grade #50 .00005
1
DIAMETER
INCH COMPONENT
Catalog Number
Chrome Steel
A
A
A
A
A
A
*A
A
*A
A
Diameter
Stainless Steel
9Q71-02
9Q71-03
9Q71-04
9Q71-05
9Q71-06
9Q71-07
9Q71-08
9Q71-10
9Q71-12
9Q71-16
A
A
A
A
A
A
A
A
A
1/16
3/32
1/8
5/32
3/16
7/32
1/4
5/16
3/8
1/2
9Y71-02
9Y71-03
9Y71-04
9Y71-05
9Y71-06
9Y71-08
9Y71-10
9Y71-12
9Y71-16
5
6
* Available on special order.
NYLON BALLS
LIGHTWEIGHT
WITHSTAND SHOCK
MAXIMUM STRENGTH
MATERIAL:
Nylon (Polyamide 6/6)
10
Priced Per 100 pieces

DIAMETER
11
INCH COMPONENT
Catalog Number
A
A
A
A
A
A
A
A
A
A
9P71-03
9P71-04
9P71-05
9P71-06
9P71-07
9P71-08
9P71-09
9P71-10
9P71-11
9P71-12
Diameter
.003
3/32
1/8
5/32
3/16
7/32
1/4
9/32
5/16
11/32
3/8
Catalog Number
A
A
A
A
A
A
A
A
A
9P71-14
9P71-16
9P71-18
9P71-20
9P71-22
9P71-24
9P71-26
9P71-28
9P71-32
Diameter
12
.003
7/16
1/2
9/16
5/8
11/16
3/4
13/16
7/8
1
5-115
13
14
15
16
6 - COUPLINGS
R
Inch
T
1
Fairloc Bellows Couplings

pg. 6-6
Heavy-Duty Bellows Couplings

pg. 6-7
Hi-Flex Bellows Couplings

pg. 6-9

pg. 6-11
Modular Bellows Couplings

pgs. 6-13 thru 6-16
Precision Bellows Couplings

Short & Long Series pgs. 6-18 & 6-19
Precision Bellows Couplings

Combination Type pg. 6-20
Bellows Couplings, with Keyway

pg. 6-21
Bellows Couplings, Clamp Type

pg. 6-22
2
3
4
5
6
7
8
9
Bellows Couplings, Regular Type

pg. 6-23
Flexible Helical Couplings Short Series Flexible Helical Couplings

pg. 6-25 Split Hub Type
pg. 6-26
10
11
Short Series Flexible Helical Couplings Short Series Flexible Helical Couplings Short Series Flexible Helical Couplings
Set Screw Type
pg. 6-28 Set Screw Type
pg. 6-29
12
13
14
Long Series Flexible Helical Couplings Long Series Flexible Helical Couplings
pg. 6-31
Split Hub Type
pg. 6-30 Set Screw Type
Long Series Flexible Helical Couplings

Split Hub Type
pg. 6-32
15
16
6-2
6-0
Long Series Flexible Helical Couplings
Set Screw Type
pg. 6-33
Low-Inertia Flexible Helical Couplings

Split Hub Type
pg. 6-34
Slit Type MSC Flexible Couplings

Split Hub Type
pg. 6-36
6 - COUPLINGS
R
Inch
0
Slit Type MSC Flexible Couplings
Split Hub Type
pg. 6- 37
Slit Type MST Flexible Couplings

Set Screw Type pgs. 6-38 & 6-39
Slit Type MSK Flexible Couplings

pgs. 6-40 & 6-41
T
1
2
3
Slit Type MSX Flexible Couplings

Split Hub Type
pg. 6-42
Slit Type MSX Flexible Couplings

Set Screw Type
pg. 6-43
Slit Type Plastic Couplings

Split Hub Type
pg. 6-44
4
5

Set Screw Type pg. 6-45
Double Disk Flexible Couplings

Set Screw Type
pg. 6-47
Single Disk Flexible Couplings

Split Hub Type
pg. 6-48
6
7
8
Double Disk Flexible Couplings

Split Hub Type
pg. 6-49
Heavy-Duty Single Disk Flexible

Couplings
pg. 6-50
Heavy-Duty Double Disk Flexible

Couplings
pg. 6-51
9
10
Magnetic Disk Couplings

pgs. 6-52 & 6-53
Spline Type Flexible Couplings, Polyurethane Spline

pg. 6-54
11
12
13
Heavy-Duty Spline Type Flexible Couplings, Hytrel Spline

pg. 6-55
Geargrip Flexible Couplings

pg. 6-56
14
15
Jaw Type Flexible Couplings, Rubber Spider

pg. 6-57
6-1
Jaw Type Flexible Couplings
Molded Acetal Spider pg. 6-58
16
6 - COUPLINGS
R
Inch
T
1
Crowned Tooth Gear Type Flexible Couplings

pg. 6-59
Control-Flex Couplings, Standard

pg. 6-60
Miniature Neo-Flex Couplings

pg. 6-62
Fairloc Neo-Flex Couplings

Short Type
pg. 6-63
2
3
Control-Flex Couplings, Heavy-Duty
pg. 6-61
4
5
6
Fairloc Neo-Flex Couplings, Long Type

pg. 6-65
Neo-Flex Couplings, Short Type

pg. 6-64
7
8

Neo-Flex Couplings, Long Type

pg. 6-66
Precision Oldham Couplings

Clamp Type
pg. 6-67
10
11
Precision Oldham Couplings, Pin Type

pg. 6-67
Oldham Couplings, Split Hub Type

pg. 6-68
Oldham Couplings, Set Screw Hub

pg. 6-69
Spider Type Flexible Couplings, Split Hub Type

pg. 6-70
12
13
14
15
16
6-2
Sleeve Type Flexible Couplings
pg. 6-71
Sleeve Stock
pg. 6-71
K Type Flexible Couplings

pg. 6-72
6 - COUPLINGS
R
Inch
Miniature Ball Couplings

pg. 6-73
Spring Couplings
pg. 6-74
Uniflex Couplings
pg. 6-75
T
1
2
3
Rigid Fairloc Shaft Couplings

pg. 6-76
Precision Shaft Couplings

pg. 6-77
Shaft Couplings
pg. 6-77
4
5
Torque Tube Couplings

pg. 6-78
Rigid Shaft Couplings

pg. 6-79
Precision Multijawed Couplings

pg. 6-79
6
7
8
Bronze Flexible Shafts, Nonmagnetic

pg. 6-80
Stainless Steel Flexible Shafts

pg. 6-81
Steel Flexible Shafts

pg. 6-82
9
10
Steel Flexible Shafts

Panel Mounting pg. 6-83
Vinyl Covered Steel Flexible Shafts

pg. 6-84

Power Drive Assemblies pg. 6-85
11
12
13

Panel Mounting
pg. 6-86
14
15
6-3
16
lattice Couplings
ZERO BACKLASH
HIGH TORQUE
R
Inch
MATERIAL:
Hubs - 6061 Aluminum

Discs - 420 Stainless Steel
End Flanges - 416 Stainless Steel
MISALIGNMENT COMPENSATION:
T
1
Max. Angular Offset: 7
FEATURES:
The unique lattice structure allows for

very high angular misalignment.
Other bores are available on special order.

H
2X
SET SCREW
O.D.
3
4
5
NEW
SECTION X-X
inch Component
Catalog Number
O.D.
A
Bore
B
Bore
S50CLM-075X01X01
S50CLM-075X01X02
S50CLM-075X02X02
S50CLM-100X02X02
S50CLM-100X02X04
S50CLM-100X04X04
S50CLM-125X03X03
S50CLM-125X03X04
S50CLM-125X04X04
S50CLM-150X04X04
S50CLM-150X04X06
S50CLM-150X06X06
S50CLM-175X05X05
S50CLM-175X07X07
S50CLM-200X06X06
S50CLM-200X06X08
S50CLM-200X08X08
S50CLM-250X10X10
.750
.750
.750
1.000
1.000
1.000
1.250
1.250
1.250
1.500
1.500
1.500
1.750
1.750
2.000
2.000
2.000
2.500
.125
.125
.250
.250
.250
.500
.375
.375
.500
.500
.500
.750
.625
.875
.750
.750
1.000
1.250
Catalog Number
(Ref. Only)
Max.
Torque
S50CLM-075...
S50CLM-100...
S50CLM-125...
S50CLM-150...
S50CLM-175...
S50CLM-200...
S50CLM-250...
12
24
48
75
135
180
300
lbf in.
L
Length
Set
Screw
.125
.250
.250
.250
.500
.500
.375
.500
.500
.500
.750
.750
.625
.875
.750
1.000
1.000
1.250
1.375
1.375
1.375
1.500
1.500
1.500
1.650
1.650
1.650
2.250
2.250
2.250
2.600
2.600
2.850
2.850
2.850
3.100
.475
.475
.475
.474
.474
.474
.460
.460
.460
.704
.704
.704
.755
.755
.816
.816
.816
.793
M4 x 0.7
M4 x 0.7
M4 x 0.7
M4 x 0.7
M4 x 0.7
M4 x 0.7
M5 x 0.8
M5 x 0.8
M5 x 0.8
M6 x 1.0
M6 x 1.0
M6 x 1.0
M6 x 1.0
M6 x 1.0
M8 x 1.25
M8 x 1.25
M8 x 1.25
M8 x 1.25
10
Max.
rpm
Max.
Lateral
Offset
Max.
Axial
Offset
Static
Torsional
Stiffness
Weight
oz.
13
10000
7500
7500
5000
5000
3750
3750
.010
.015
.015
.020
.020
.025
.025
.020
.025
.030
.030
.040
.050
.050
+.001
-.000
+.001
-.000
lbf in. / deg

49
105
186
338
558
900
1639
.74
1.41
2.16
4.35
6.69
9.92
16.45
6-3A
Rev: 5-1-12 SS
11
12
14
15
16
lattice Couplings
ZERO BACKLASH
MATERIAL:
Hubs - 6061 Aluminum

Discs - High Performance Polyamide Resin
Inch
FEATURES:
The unique lattice structure allows for

very high angular misalignment.
B O.D.
4
5
2X
SET SCREW
L
NEW
SECTION X-X
inch Component
Catalog Number
O.D.
S50CLP-050X01X01
S50CLP-050X01X02
S50CLP-050X02X02
S50CLP-100X02X02
S50CLP-100X02X04
S50CLP-100X04X04
S50CLP-150X03X03
S50CLP-150X03X04
S50CLP-150X04X04
S50CLP-150X04X06
S50CLP-150X06X06
S50CLP-200X05X05
S50CLP-200X07X07
S50CLP-200X06X06
S50CLP-200X06X08
S50CLP-200X08X08
S50CLP-250X10X10
.500
.500
.500
1.000
1.000
1.000
1.500
1.500
1.500
1.500
1.500
2.000
2.000
2.000
2.000
2.000
2.500
.125
.125
.250
.250
.250
.500
.375
.375
.500
.500
.750
.625
.875
.750
.750
1.000
1.250
.125
.250
.250
.250
.500
.500
.375
.500
.500
.750
.750
.625
.875
.750
1.000
1.000
1.250
.850
.850
.850
1.500
1.500
1.500
2.200
2.200
2.200
2.200
2.200
2.750
2.750
2.750
2.750
2.750
3.250
Catalog Number
(Ref. Only)
Max.
Torque
Max.
rpm
Max.
Lateral
Offset
Max.
Axial
Offset
S50CLP-050...
S50CLP-100...
S50CLP-150...
S50CLP-200...
S50CLP-250...
5
20
50
120
200
10000
7500
5000
3750
3750
.005
.008
.010
.010
.010
.008
.012
.018
.020
.020
lbf in.
+.001
-.000
B
Bore
A
Bore
+.001
-.000
L
Length
Set
Screw
.234
.234
.234
.381
.381
.381
.548
.548
.548
.548
.548
.639
.639
.639
.639
.639
.711
M3 x 0.5
M3 x 0.5
M3 x 0.5
M4 x 0.7
M4 x 0.7
M4 x 0.7
M5 x 0.8
M5 x 0.8
M5 x 0.8
M5 x 0.8
M5 x 0.8
M6 x 1.0
M6 x 1.0
M6 x 1.0
M6 x 1.0
M6 x 1.0
M8 x 1.25
Static
Torsional
Stiffness
Weight
oz.
lbf in. / deg

15.0
50.0
150
400
700
.55
.93
3.10
6.98
11.63
6-3B
Rev: 5-1-12 SS
8
9
10
11
12
13
14
15
16

R
T
1
Inch
Fairloc is a patented component fastening system that is built into the

hub of the part. How it works is explained on page 6-5.
The relationship between the clamp screw fastening torque and the
torque at which the component starts to slip on the shaft is shown in the
charts. These are typical values for stainless steel gears mounted on
stainless steel shafts.
2
3
4
11
12
13
14
3/1
TER
ME
IA
ED
O
/8 B
20
30
40
50
60
70
80
CLAMP SCREW FASTENING TORQUE (ozf in.)

Fig. 1
Figure 1 shows the torque at which the sample Fairloc
gears started to slip on the shaft. All gears and shafts
were made of 303 Stainless Steel. Gear bores were within
+.0003 inch of nominal values. Shafts had surface finishes
of 16 micro-inch maximum and were within -.0002 inch of
the nominal diameters.
6-4
80
oz
f
f in in.
.
CLAMP SCREW
FASTENING
TORQUES
oz
R
TE
ME
RE
O
6B
15
16
ER
ET
M
IA
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
64
10
DIA
RE
SLIP TORQUE (lbf in.)
BO
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
SLIP TORQUE (lbf in.)
INCH BORE TORQUE DATA
1/4
zf
o
48
in.
32
3/32 1/6
.05
.10
ozf
in.
3/16
.15
.20
1/4
.25
BORE DIAMETER (in.)

Fig. 2
Figure 2 compares the slip torques for
different values of the clamping screw
fastening torques.
.30


0
R
Inch
HERES HOW IT WORKS:
T
1
2


FEATURES:

7
8
SOLID HINGE
PORTION

HUB
9
10
TRANSVERSE
SLOT
RADIAL SLOT
FRONT
BACK
Legend
11
12
Fastening Method
Clamps
Yes
No
No
Yes
No
*Fairloc
Yes
Yes
Yes
Yes
Yes
B Self-contained
Keys
No
No
No
No
No
Pins
No
No
No
No
Yes
D Easy adjustment
Set Screws
No
No
No
No
Yes
13
14
15
* Patented
6-5
16
I
R
FAIRLOC BELLOWS COUPLINGS

EASY INSTALLATION
READILY REPOSITIONED
Inch
MATERIAL:
T
1
2
3
4
Hubs - Brass
Bellows - Phosphor Bronze
Socket Head Screws - 300 Series Stainless Steel
Finish - Tin Plate
FEATURES:
Absorbs end play in shafts.

Allows looser tolerances in mounting components.
Corrects for angular and parallel axis misalignment.
Zero backlash.
Constant angular velocity.
Dampens vibration and noise.
Fairloc eliminates marred shafts.

Suggested clearance fit between the bore and
shaft is .0001 / .0008.
B A
7
8
9
10
11
12
INCH COMPONENT
Catalog Number
A
Bore
S50FP9-FBC12015
S50FP9-FBC12515
S50FP9-FBC18715
S50FP9-FBC18715A
S50FP9-FBC25021
S50FP9-FBC31221
S50FP9-FBC37527
.1200
.1250
.1875
.1878 / .1873
.2500
.3125
.3750
Catalog Number
(Ref. Only)
Max. Torque
S50FP9-FBC12015
S50FP9-FBC12515
S50FP9-FBC18715
S50FP9-FBC18715A
S50FP9-FBC25021
S50FP9-FBC31221
S50FP9-FBC37527
120
120
150
180
200
200
300
13
14
15
16
SOCKET HEAD
CAP SCREW
Other bores, finishes available on special order.
6-6
+.001
-.000
ozf in.
F
Bellows
Diameter
.015
E Ref.
Active
Bellows
Length
B
Hub
Diameter
L
Overall
Length
Screw
Size
.433
.433
.495
.562
.610
.682
.870
.92
.92
.92
1.00
1.16
1.16
1.31
#2-56
#2-56
#2-56
#4-40
#4-40
#4-40
#6-32
.010
.015
.242
.242
.242
.230
.325
.325
.352
15/32
15/32
15/32
15/32
21/32
21/32
27/32
.06
Max.
Angular
Offset
Max.
Lateral
Offset
Max.
Axial
Motion
Torsional
Deflection @
Max. Load
5
5
5
4
6
6
6
.015
.015
.015
.010
.015
.015
.015
+.015 / -.030
+.015 / -.030
+.015 / -.030
+.012 / -.024
+.020 / -.040
+.020 / -.040
+.025 / -.050
1.2
1.2
1.5
.8
1.4
1.4
1.5
HEAVY-DUTY SET SCREW TYPE HUB BELLOWS COUPLINGS

MATERIAL:
Hubs - Brass
Set Screws - Stainless Steel
Finish - Tin Plate
R
Inch
1
Precision
Component

Max. Lateral Offset: .015
T
1
Other bores, finishes available on special order.
2
T1
SET SCREW
2 HOLES
T2
SET SCREW
2 HOLES
120
B A1
A2
D
L
INCH COMPONENT
Catalog Number
S50BPH-P18718733
S50BPH-P18725033
S50BPH-P25025033
S50BPH-P25031233
S50BPH-P31237534
S50BPH-P37537534
S50BPH-P37550034
Catalog Number
(Ref. Only)
S50BPH-P18718733
S50BPH-P18725033
S50BPH-P25025033
S50BPH-P25031233
S50BPH-P31237534
S50BPH-P37537534
S50BPH-P37550034
A1
Dia.
A2
Dia.
+.0005
- .0000
+.0005
- .0000
.1873
.1873
.2498
.2498
.3123
.3748
.3748
.1873
.2498
.2498
.3123
.3748
.3748
.4998
B
Dia.
.060
.669
.669
.669
.669
.866
.866
.866
1.035
1.035
1.035
1.035
1.063
1.063
1.063
Maximum
Torque
ozf in.
Maximum
Axial
Motion
200
200
200
200
300
300
300
+.020 / -.040
+.020 / -.040
+.020 / -.040
+.020 / -.040
+.025 / -.050
+.025 / -.050
+.025 / -.050
T1
T2
#2-56
#2-56
#4-40
#4-40
#6-32
#6-32
#6-32
#2-56
#4-40
#4-40
#6-32
#6-32
#6-32
#8-32
.354
.354
.354
.354
.354
.354
.354
Spring Rate
for Axial
Deflection
lbf / in.
138
138
138
138
138
138
138
7
8
9
Torsional
Deflection
@ Maximum Load
10
1.4
1.4
1.4
1.4
1.5
1.5
1.5
11
12
13
14
15
6-7
16
HI-FLEX BELLOWS COUPLINGS TECHNICAL DATA

INTEGRAL CLAMP TYPE
R
T
1
2
FEATURES:
INCH COMPONENT
Catalog Number
(Ref.)
QM
Max.
Torque
PM
Max.
Offset
QM
Max.
Angle
S
Max.
Axial
F
Side
Force
F
Torsional
Def.
Spring
rate
S9901Y-G120134
S9901Y-G125134
S9901Y-G125124
S9901Y-G188134
S9901Y-G188124
S9901Y-G188110
S9901Y-G250134
S9901Y-G250124
S9901Y-G250110
S9901Y-G250120
S9901Y-G313138
S9901Y-G313189
S9901Y-G375189
S9901Y-G375116
S9901Y-G500116
S9901Y-G500185
33
33
41
33
41
53
33
41
53
186
348
150
150
1000
1000
1300
.045
.045
.028
.045
.028
.017
.045
.028
.017
.014
.018
.068
.068
.001
.001
.018
18
18
13
18
13
10
18
13
10
8
7.6
16
16
1
1
6
.125
.125
.117
.125
.117
.090
.125
.117
.090
.083
.105
.230
.230
.026
.026
.129
.32
.32
.53
.32
.53
1.11
.32
.53
1.11
3.37
3.47
.53
.53
307.12
307.12
8.02
36.9
36.9
18.2
36.9
18.2
14.3
36.9
18.2
14.3
6.2
3.2
5.4
5.4
.3
.3
.8
22.6
22.6
17.5
22.6
17.5
22.8
22.6
17.5
22.8
58.7
63.8
26.1
26.1
397.3
397.3
115.2
5
6
QM =
PM =
QM =
S =
F =
F =
Maximum rated instantaneous torque in ounce inches

Maximum permissible parallel misalignment
Maximum permissible angular misalignment in degrees
Maximum permissible compression of the coupling (axial deflection) inches
Radial reaction force (side force) in ounces per .001" of parallel misalignment (average)
Torsional deflection (twist) in seconds of arc per ounce inch of torque (average)
9
10
11
12
13
14
15
16
Hi-Flex Bellows Couplings are used for applications which require large amounts
of shaft misalignment combined with low resultant radial loads on the bearings.
Inch
Torque range from 33 to 1300 ozf in.

Zero backlash.
Zero cyclic speed variation during 360 rotation.
Very low torsional deflection.
6-8
lbf / in.
INTEGRAL CLAMP HI-FLEX BELLOWS COUPLINGS

MATERIAL:
Hubs - Aluminum
Bellows - Flexible Electrodeposited Nickel
Cap Screws - Black Oxided Steel
R
Inch
FOR APPLICATIONS REQUIRING:
Precise Adjustment
Repositioning
Reversal Torque Resistance
Vibration Resistance
Ability to Handle Large Shaft Misalignment
T
1
Other bores and finishes are available

on special order.
For additional information see
technical data on opposite page.
SOCKET HEAD
CAP SCREW
B F
2
3
4
E
L
INCH COMPONENT
Catalog Number
S9901Y-G120134
S9901Y-G125134
S9901Y-G125124
S9901Y-G188134
S9901Y-G188124
S9901Y-G188110
S9901Y-G250134
S9901Y-G250124
S9901Y-G250110
S9901Y-G250120
S9901Y-G313138
S9901Y-G313189
S9901Y-G375189
S9901Y-G375116
S9901Y-G500116
S9901Y-G500185
A
Max. Misalignment
L
B
F
E
D
Bore Hub Bellows Bellows Hub Overall Cap Torque
+.001
ozf in. Angular Lateral
Screws
Length Width Length
-.000 Dia. O.D.
Offset
Offset
.120
.125
.125
.188
.188
.188
.250
.250
.250
.250
.3125
.3125
.375
.375
.500
.500
.571
.571
.709
.571
.709
.709
.571
.709
.709
.866
1.004
1.004
1.004
1.429
1.429
1.429
.500
.500
.640
.500
.640
.640
.500
.640
.640
.750
.985
1.000
1.000
1.430
1.430
1.430
.740
.740
.643
.740
.643
.501
.740
.643
.501
.540
.729
1.230
1.230
.227
.227
.916
.300
.300
.300
.300
.300
.300
.300
.300
.300
.327
.327
.327
.327
.465
.465
.465
1.340
1.340
1.244
1.340
1.244
1.101
1.340
1.244
1.101
1.194
1.383
1.885
1.885
1.157
1.157
1.847
M2
M2
M2
M2
M2
M2
M2
M2
M2
M2.5
M2.5
M2.5
M2.5
M4
M4
M4
33
33
41
33
41
53
33
41
53
186
348
150
150
1000
1000
1300
17
17
13
17
13
10
18
13
10
8
8
16
16
1
1
6
.045
.045
.028
.045
.028
.017
.045
.028
.017
.014
.018
.068
.068
.001
.001
.018
6
7
8
9
10
11
12
13
14
15
6-9
REV: 06.08.12 mh
16
I
R
HI-FLEX BELLOWS COUPLINGS TECHNICAL DATA

SET SCREW TYPE
CLAMP TYPE
Inch
FEATURES:
T
1
2
Torque range from 2 to 280 ozf in.

Zero backlash.
Zero cyclic speed variation during 360 rotation.
Very low torsional deflection.
5
6
7
8
9
10
The Couplings are manufactured in five bellows outside diameters which have various bore sizes.
INCH COMPONENT
Catalog Number
(Ref.)
Set Screw Type
Clamp Type
QM
Max.
Torque
S9901Y-G404-47
S9901Y-G404-48
S9901Y-G404-49
S9901Y-G404-50
S9901Y-G404-51
S9901Y-G404-52
S9901Y-G404-53
S9901Y-G404-54
S9901Y-G404-55
S9901Y-G404-56
S9901Y-G404-57
S9901Y-G404-58
S9901Y-G404-59
S9901Y-G404-60
S9901Y-G404-61
S9901Y-G404-62
S9901Y-G405-45
S9901Y-G405-45A
S9901Y-G405-46
S9901Y-G405-46A
S9901Y-G405-47
S9901Y-G405-48
S9901Y-G405-49
S9901Y-G405-50
S9901Y-G405-51
S9901Y-G405-52
S9901Y-G405-53
S9901Y-G405-54
S9901Y-G405-55
S9901Y-G405-56
S9901Y-G405-57
S9901Y-G405-57A
S9901Y-G405-58A
2
5
7
7
9
9
7
9
14
18
33
50
65
105
140
188
152
152
280
QM =
PM =
QM =
S =
F =
F =
PM
Max.
Offset
QM
Max.
Angle
S
Max.
Axial
F
Side
Force
F
Torque
Def.
.076
.017
.007
.007
.004
.004
.066
.036
.015
.010
.044
.018
.010
.046
.026
.014
.068
.068
.020
31
15
9
9
7
7
27
20
13
10
18
12
9
14
11
8
17
17
9
.107
.051
.032
.032
.023
.023
.139
.103
.066
.054
.125
.081
.059
.149
.112
.083
.230
.230
.121
.02
.18
.64
.64
1.55
1.55
.07
.17
.58
1.00
.32
1.13
2.73
.59
1.40
3.50
.54
.54
2.85
616
306
202
202
152
152
134
99
67
55
37
24
18
11
8.4
6.2
5.3
5.3
3.1
Maximum rated instantaneous torque in ounce inches

Maximum permissible angular misalignment in degrees
Maximum permissible compression of the coupling (axial deflection) inches
Radial reaction force (side force) in ounces per .001" of parallel misalignment (average)
Torsional deflection (twist) in seconds of arc per ounce inch of torque (average)
11
12
13
14
15
16
Hi-Flex Bellows Couplings are used for applications which require large amounts
of shaft misalignment combined with low resultant radial loads on the bearings.
3
4
6-10
HI-FLEX BELLOWS COUPLINGS

SET SCREW TYPE
CLAMP TYPE
R
Inch
MATERIAL:

Bellows - Flexible Electrodeposited Nickel
For additional information, see technical data

on opposite page.
SET SCREW
(4 SUPPLIED)
2
A
A
C
E
INCH COMPONENT
Catalog Number
Fig. 1 Set Screw Type
S9901Y-G404-47
S9901Y-G404-48
S9901Y-G404-49
S9901Y-G404-50
S9901Y-G404-51
S9901Y-G404-52
S9901Y-G404-53
S9901Y-G404-54
S9901Y-G404-55
S9901Y-G404-56
S9901Y-G404-57
S9901Y-G404-58
S9901Y-G404-59
S9901Y-G404-60
S9901Y-G404-61
S9901Y-G404-62
Fig. 2 Clamp Type
* S9901Y-G405-45
* S9901Y-G405-46
* S9901Y-G405-45A
S9901Y-G405-47
S9901Y-G405-48
S9901Y-G405-49
S9901Y-G405-50
S9901Y-G405-51
S9901Y-G405-52
S9901Y-G405-53
S9901Y-G405-54
S9901Y-G405-55
S9901Y-G405-56
S9901Y-G405-57
* S9901Y-G405-57A
S9901Y-G405-58A
+.001
-.000
B
Hub Dia.
.005
F
D
Fig. 1
Set Screw Type
A
Bore
C
E
FOR CLAMPS,
SEE INDEX
3
4
Fig. 2
Clamp Type
C
Bellows
Length
.01
.015
E
Overall
Length
F
Bellows
O.D.
Set
Screw
.015
.005
.0903
.0903
.120
.120
.1875
.1875
.1875
.1875
.250
.250
.250
.250
.250
.250
.3125
.3125
.245
.245
.245
.245
.365
.365
.365
.365
.492
.492
.492
.500
.500
.500
.625
.625
.74
.37
.245
.185
.74
.55
.37
.305
.74
.49
.37
.98
.73
.54
1.23
.73
.148
.148
.148
.148
.148
.148
.148
.148
.173
.173
.173
.173
.173
.173
.198
.198
1.035
.665
.540
.480
1.035
.845
.665
.600
1.085
.835
.715
1.325
1.075
.885
1.625
1.125
.250
.250
.250
.250
.375
.375
.375
.375
.500
.500
.500
.750
.750
.750
1.000
1.000
#2-56
#2-56
#2-56
#2-56
#2-56
#2-56
#2-56
#2-56
#4-40
#4-40
#4-40
#4-40
#4-40
#4-40
#6-32
#6-32
.120
.120
.120
.1875
.1875
.1875
.1875
.250
.250
.250
.250
.250
.250
.3125
.3125
.3125
.187
.187
.187
.250
.250
.250
.250
.312
.312
.312
.312
.312
.312
.375
.375
.375
.245
.185
.245
.74
.55
.37
.305
.74
.49
.37
.98
.73
.54
1.23
1.23
.73
.219
.219
.281
.281
.281
.281
.281
.281
.281
.281
.281
.281
.281
.281
.343
.343
.745
.685
.871
1.366
1.176
.996
.931
1.366
1.116
.996
1.606
1.356
1.166
1.856
1.980
1.480
.250
.250
.250
.375
.375
.375
.375
.500
.500
.500
.750
.750
.750
1.000
1.000
1.000
6-11
6
7
8
9
10
11
12
13
14
15
16
MODULAR BELLOWS COUPLINGS

FEATURES:
T
1
2
3
4
5
6

Various shaft diameters are accommodated via prebored hub bushings.
Permits complete couplings to be quickly and easily assembled from stock components.
Inch
Time-saving installation with fast and easy shaft attachment.
Modular components provide immediate availability.
0
1
Low-restoring forces protects shaft bearings.
STEEL
TYP. BUSHING
BELLOWS
COUPLING SELECTION:
Operating Torque:
Establish the Maximum
Operating Torque
If the Maximum Operating
Temperature will exceed 122F, multiply the Maximum
Operating Torque by the Temperature Factor, as shown below:
Temperature F
Temperature Factor
122
1
212
1.075
392
1.225
482
1.3
Shaft/Hub Tolerances:
H7 Tolerance for bores of bushings
h6 Tolerance recommended for shafts
Size 3
1593
1416
1239
1062
Locate both the values for maximum operating torque in lbf in. and
misalignment in % as ascertained above, on the corresponding axes of
Diagram 1. The intersection of these two values must be below the
characteristic curve of the preselected coupling size.
Temperature Resistance:
Up to 482F
Diagram 1
1770
Misalignment:
Determine the various shaft misalignments possible (axial, angular and
radial) as a percentage of permissible shaft misalignments as shown
in the technical data table for the preselected coupling size. Add each of
the percentage values noting that the sum must be smaller than 100%. For
example, .008 of axial misalignment corresponds to 25% of the permissible
value of .032 for a Size 2 coupling.
302
1.1
CLAMPING
RING
Size 2
885
708
Torque T (lbf in.)
Important Installation Notes:

Bores must be cleaned and any corrosion prohibitive removed by
washing with a suitable solvent.
Bores and shafts must not be oiled and greased in any way
531
Size 1
354
177
159
Size 0
124
88
10
53
11
12
13
14
15
16
17.5
0
20
TECHNICAL DATA:
Size
0
1
2
3
Max.
Torque T
lbf in.
142
354
885
1770
6-12
40
60
80
100
Misalignment (%)
Max.
Speed
rpm
10000
8000
6000
4000
Torsional
Rigidity
in. lbf/rad
36 x 103
80 x 103
195 x 103
443 x 103
Axial
Rigidity
Tight.
Torque
of Clamp
Angular Screw
Permissible Misalignments
lbf/in.
Radial
Axial
286
400
514
685
.012
.016
.020
.020
.016
.024
.032
.032
in.
in.
deg
3
3
3
3
lbf in.
89
124
150
363
Inertia
lb. in.2
.10
.30
.90
3.89
MODULAR BELLOWS COUPLINGS SIZE 0

MODULAR PREBORED HUB BUSHINGS
MATERIAL:
Inch
Bushing - Aluminum
Clamp - Aluminum
Bellows - Stainless Steel
FEATURES:
Backlash-free torque transmission.

High torsional rigidity.
High-speed torque transmission.
Low-mass moment of inertia.
1
1.95
(49.5)
CAP
SCREW
FOR COMPLETE COUPLING
INCH COMPONENT
CATALOG NUMBER
S50SFX-00H
H
Bore 1
3
Bore 2
Bore
Code
12
16
20
24
* When creating a
Catalog Number,
Bore 1 must be
smaller than or
equal to Bore 2.
51
(13)
1.81
(46)
Bore
.375
.500
.625
.750
4
5
Example: For a coupling with a .375 in. bore on

one side and a .500 in. bore on the other, specify
Catalog Number: S50SFX-00H12H16.
.91 (23)
.91 (23)
6
7
.87 (22) d
8
9
.93 (23.5)
1.75 (44.5)
.59 (15)
Fig. 1
Fig. 2
Fig. 3
Fig. 2
Fig. 1
10
FOR INDIVIDUAL COMPONENTS
11
INCH COMPONENT
Catalog Number
Fig. 1 Bushing
S50SFX-00038118
S50SFX-00050118
S50SFX-00063118
S50SFX-00075118
Fig. 2 Clamp
S35SFX-00122169
Fig. 3 Bellows
S60SFX-00213122
Transmissible
Torque
Material
d
Bore
Aluminum
Aluminum
Aluminum
Aluminum
.3756 / .3750
.5007 / .5000
.6257 / .6250
.7508 / .7500
8
12
12
12
Aluminum
Stainless Steel
lbf ft.
6-13
12
13
14
15
16

R
T
MATERIAL:
Inch
Bushing - Aluminum
Clamp - Aluminum
FEATURES:
1
2
3
4
5
6

2.33
(59.3)
CAP
SCREW
.59
(15)
INCH COMPONENT
CATALOG NUMBER
S50SFX-01H
H
Bore 1
* When creating a
Catalog Number,
Bore 1 must be
smaller than or
equal to Bore 2.
2.24
(57)
Bore 2
Bore
Code
16
20
24
28
32
Bore
.500
.625
.750
.875
1.000

one side and a .750 in. bore on the other, specify
1.22 (31)
1.22 (31)
7
8
1.18
(30)
1.16 (29.5)
.70 (18)
10
11
12
13
14
15
16
2.13 (54)
Fig. 1
Fig. 2
Fig. 3
Fig. 2
Fig. 1
INCH COMPONENT
Catalog Number
Fig. 1 Bushing
S50SFX-01050118
S50SFX-01063118
S50SFX-01075118
S50SFX-01088118
S50SFX-01100118
Fig. 2 Clamp
S35SFX-01122216
Fig. 3 Bellows
S60SFX-01213122
6-14
Transmissible
Torque
Material
d
Bore
Aluminum
Aluminum
Aluminum
Aluminum
Aluminum
.5007 / .5000
.6257 / .6250
.7508 / .7500
.8758 / .8750
1.0008/1.0000
19
26
29
29
29
Aluminum
Stainless Steel
lbf ft.

MATERIAL:
Inch
Bushing - Aluminum
Clamp - Aluminum
FEATURES:

1
2.83
(72)
CAP
SCREW
.67
(17)
INCH COMPONENT
CATALOG NUMBER
S50SFX-02H
H
Bore 1
* When creating a
Bore 2
Bore
Code
20
24
28
32
40
Catalog Number,
Bore 1 must be
smaller than or
equal to Bore 2.
3
2.83
(72)
Bore
.625
.750
.875
1.000
1.250

one side and a 1.250 in. bore on the other, specify
5
1.69 (43)
1.69 (43)
6
7
1.66
(42.2)
.79 (20)
Fig. 1
Fig. 2
1.52 (38.5)
2.58 (65.5)
Fig. 3
Fig. 2
Fig. 1
10
11
INCH COMPONENT
Catalog Number
Fig. 1 Bushing
S50SFX-02063166
S50SFX-02075166
S50SFX-02088166
S50SFX-02100166
S50SFX-02125166
Fig. 2 Clamp
S35SFX-02169279
Fig. 3 Bellows
S60SFX-02258169
Transmissible
Torque
Material
d*
Bore
Aluminum
Aluminum
Aluminum
Aluminum
Aluminum
.6257 / .6250
.7508 / .7500
.8758 / .8750
1.0008 / 1.0000
1.2510 / 1.2500
44
53
62
74
74
Aluminum
Stainless Steel
lbf ft.
12
13
14
15
* 1.125", 1.375" bore bushings are available on special order.
6-15
16

R
T
MATERIAL:
Inch
Bushing - Aluminum
Clamp - Aluminum
FEATURES:
1
2
3
4
5
6
7

3.55
(90.3)
CAP
SCREW
.87
(22)
INCH COMPONENT
CATALOG NUMBER
S50SFX-03H
H
Bore 1
* When creating a
Bore 2
Bore
Code
24
28
32
40
48
56
Catalog Number,
Bore 1 must be
smaller than or
equal to Bore 2.
3.70
(94)
Bore
.750
.875
1.000
1.250
1.500
1.750
Example: For a coupling with a 1.250 in. bore on

one side and a 1.750 in. bore on the other, specify
2.17
(55)
2.22 (56.5)
2.22 (56.5)
9
1.79 (45.5)
1.02 (26)
10
Fig. 1
Fig. 2
11
12
13
14
15
16
3.17 (80.5)
Fig. 3
Fig. 2
Fig. 1
INCH COMPONENT
Catalog Number
Material
Fig. 1 Bushing
S50SFX-03075217
Aluminum
S50SFX-03088217
Aluminum
S50SFX-03100217
Aluminum
S50SFX-03125217
Aluminum
S50SFX-03150217
Aluminum
S50SFX-03175217
Aluminum
Fig. 2 Clamp
S35SFX-03222362
Aluminum
Fig. 3 Bellows
S60SFX-03317222
Stainless Steel
* 1.125", 1.375" bore bushings are available on special order.
6-16
d*
Bore
Transmissible
Torque
lbf ft.
.7508 / .7500
.8758 / .8750
1.0008 / 1.0000
1.2510 / 1.2500
1.5010 / 1.5000
1.7510 / 1.7500
98
108
123
147
147
147
PRECISION BELLOWS COUPLINGS

Precision Bellows Couplings are used for applications which require relatively high torque loads,
combined with low torsional deflections. This series of couplings is manufactured by assembling
two hub configurations in a variety of bore sizes to a common diameter bellows. Therefore, the
specifications for all Precision Bellows Couplings are identical as follows:
Inch
S9901Z-Series
Specifications
G404-01 thru -34

G405-01 thru -34
G406-01 thru -43
Maximum torque (See note 1)

Backlash
Maximum recommended operating speed
Weight
Axial reaction thrust (approximate)
Radial reaction force at maximum parallel misalignment
Maximum torsional deflection at maximum torque
Torsional deflection rate (approximate)
Maximum permissible parallel misalignment*
Maximum permissible angular misalignment*
Maximum axial deflection*
G417-01 thru -34

G418-01 thru -34
3
.02 / ozf in.
.030 in.
10
+.030 in. ext.
-.090 in. comp.
NOTE 1: The maximum torque that is given above as 150 ozf in. is the maximum instantaneous or constant torque that the
coupling can safely transmit for reliable service when the three asterisk designated values are all at zero. The following
formula is used to compute the rated torque for a given set of application conditions:

PA AA A
QA = Qmax [1 .5( + + )] where:
Pmax Amax max
QA
Qmax
PA
Pmax
AA
Amax
FA
Fmax
=
=
=
=
=
=
=
=
1
2
150 ozf in.

Zero
2000 rpm
.4 oz.
160 lbf / in.
5 lbf
1.5
.01 /ozf in.
.015 in.
5
+.015 in. ext.
-.045 in. comp.
4
5
6
7
Torque the coupling can transmit under specified conditions

Maximum torque the coupling can transmit under ideal conditions (150 ozf in.)
Actual parallel misalignment*
Actual axial deflection from free position (either extension or compression)*
Maximum permissible axial deflection from free position
Actual angular misalignment*
Maximum permissible angular misalignment
8
9
* If one of the asterisk designated values is at maximum, the other two must be zero. The percentages of maximum of
each of the asterisk designated values, when added, should not exceed 100% for reliable service. For example, if the
shafts that are connected by a S9901Z-G404 series bellows coupling are parallel misaligned .005, angularly misaligned 2,
and mounted such that the bellows will have to compress .009 from its free position when in use, then the .005 of parallel
misalignment is 33% of the .015 total allowable, the 2 of angular misalignment is 40% of the 5 total allowable, and the
.009 of axial compressive deflection is 20% of the -.045 total allowable. The sum of these percentages (33% + 40% + 20%)
is equal to 93%. The safe load that can be transmitted under these conditions is 80.25 ozf in.
10
11
12
13
14
15
6-17
16

SHORT SERIES
R
T
1
MATERIAL:
Inch
Hubs - Set Screw Type: Brass

- Clamp Type: Beryllium Copper
1
Precision
Component
SPECIFICATIONS:
2
3
Tin plate
Zero backlash
Available with clamp or set screw type hubs
Maximum speed: 2000 rpm
Available on request: Special couplings.

For additional information, see preceding technical data.
2 PC. #4-40 SOC. HD. SET SCREWS ON

EACH END, 120 APART (4 SUPPLIED)
FOR CLAMPS,
SEE INDEX
A1
A1 15/32
A2
1/4
7
8
9
10
11
12
B1 15/32
A2
9/32
1/4
9/32
3/4 1/16
1 1/16
Set Screw Type
Clamp Type
INCH COMPONENT
Catalog Number
A1
Dia.
A2
Dia.
B1
Dia.
B2
Dia.
Set Screw Type
Clamp Type
+.0005
-.0000
+.0005
-.0000
+.000
-.003
+.000
-.003
S9901Z-G404-01
S9901Z-G404-02
S9901Z-G404-03
S9901Z-G404-04
S9901Z-G404-12
S9901Z-G404-13
S9901Z-G404-14
S9901Z-G404-23
S9901Z-G404-24
S9901Z-G404-34
S9901Z-G405-01
S9901Z-G405-02
S9901Z-G405-03
S9901Z-G405-04
S9901Z-G405-12
S9901Z-G405-13
S9901Z-G405-14
S9901Z-G405-23
S9901Z-G405-24
S9901Z-G405-34
.1200
.1248
.1873
.2498
.1200
.1200
.1200
.1248
.1248
.1873
.1200
.1248
.1873
.2498
.1248
.1873
.2498
.1873
.2498
.2498
.187
.187
.250
.312
.187
.187
.187
.187
.187
.250
.187
.187
.250
.312
.187
.250
.312
.250
.312
.312
13
14
15
16
B2
6-18

LONG SERIES
MATERIAL:
Inch
Hubs - Set Screw Type: Brass

- Clamp Type: Beryllium Copper
1
Precision
Component
T
1
SPECIFICATIONS:
Tin plate
Zero backlash
Available with clamp or set screw type hubs
2
3

2 PC. #4-40 SOC. HD. SET SCREWS ON

EACH END, 120 APART (4 SUPPLIED)
FOR CLAMPS,
SEE INDEX
A1
A1 15/32
A2
1/4
B2
B1 15/32
A2
9/32
1/4
9/32
1-1/4 1/16
1-1/2 1/16
Set Screw Type
Clamp Type
7
8
INCH COMPONENT
Catalog Number
A1
Dia.
A2
Dia.
B1
Dia.
B2
Dia.
Set Screw Type
Clamp Type
+.0005
-.0000
+.0005
-.0000
+.000
-.003
+.000
-.003
S9901Z-G417-01
S9901Z-G417-02
S9901Z-G417-03
S9901Z-G417-04
S9901Z-G417-12
S9901Z-G417-13
S9901Z-G417-14
S9901Z-G417-23
S9901Z-G417-24
S9901Z-G417-34
S9901Z-G418-01
S9901Z-G418-02
S9901Z-G418-03
S9901Z-G418-04
S9901Z-G418-12
S9901Z-G418-13
S9901Z-G418-14
S9901Z-G418-23
S9901Z-G418-24
S9901Z-G418-34
.1200
.1248
.1873
.2498
.1200
.1200
.1200
.1248
.1248
.1873
.1200
.1248
.1873
.2498
.1248
.1873
.2498
.1873
.2498
.2498
.187
.187
.250
.312
.187
.187
.187
.187
.187
.250
.187
.187
.250
.312
.187
.250
.312
.250
.312
.312
9
10
11
12
13
14
15
6-19
16

COMBINATION TYPE
R
T
1
MATERIAL:
Inch
Hubs - Set Screw End: Brass

- Clamp End: Beryllium Copper
1
Precision
Component
SPECIFICATIONS:
2
3
Tin plate
Zero backlash

4
2 PC. #4-40 SOC HD. SET
SCREWS (120 APART)
5
6
A1
15/32 A2
1/4
FOR CLAMPS
9/32 SEE INDEX
7/8 1/16
INCH COMPONENT
Catalog Number
10
11
12
13
+.0005
-.0000
.1248
S9901Z-G406-02
.1873
S9901Z-G406-03
.2498
S9901Z-G406-04
* S9901Z-G406-12
.1200
.1200
S9901Z-G406-13
.1248
S9901Z-G406-21
.1248
S9901Z-G406-24
.1873
S9901Z-G406-31
.1873
S9901Z-G406-32
.1873
S9901Z-G406-34
.2498
S9901Z-G406-41
.2498
S9901Z-G406-42
.2498
S9901Z-G406-43
14
15
16
A1
Dia.
6-20
A2
Dia.
A3
A3
Dia.
+.0005
-.0000
+.000
-.003
.1248
.1873
.2498
.1248
.1873
.1200
.2498
.1200
.1248
.2498
.1200
.1248
.1873
.187
.250
.312
.187
.187
.187
.187
.250
.250
.250
.312
.312
.312
BELLOWS COUPLINGS
TRIPLE-PLY CONSTRUCTION
HIGH TORQUE
EXCELLENT FOR TACHOGENERATOR
R
Inch
MATERIAL:
Brass, Polished
NOTE: Although of a very high torsional stiffness, their

transverse flexibility will allow shafts having relatively
large offsets to be coupled, imposing negligible side
load on the bearings. They will accommodate slight
axial displacements of the shafts due to expansion, and
clearances in the bearings, etc.
T
1
2
* No angular relationship of set screw location.
3
*SET SCREW 2 @ 90
L
D
(TYP)
w +.002
-.000
E
(TYP)
B
(TYP)
h +.006
-.000
6
A
(TYP)
KEYWAY DATA
7
8
INCH COMPONENT
Catalog Number
A
B
C
Bore Hub
O.D.
+.001
Dia.
-.000
S50KB9-HTA1608
S50KB9-HTA1612
S50KB9-HTA2012
S50KB9-HTA2016
S50KB9-HTA2416
S50KB9-HTB2020
S50KB9-HTB2024
S50KB9-HTB2416
S50KB9-HTB2420
S50KB9-HTB2424
S50KB9-HTC2920
S50KB9-HTC2924
S50KB9-HTC2932
.250
.375
.375
.500
.500
.625
.750
.500
.625
.750
.625
.750
1.000
1-3/16
1-3/16
1-3/16
1-3/16
1-3/16
1-3/8
1-3/8
1-3/8
1-3/8
1-3/8
1-7/8
1-7/8
1-7/8
5/32
5/32
5/32
5/32
5/32
5/32
5/32
5/32
5/32
5/32
3/16
3/16
3/16
1-9/16
1-9/16
1-9/16
1-9/16
1-9/16
1-13/16
1-13/16
1-13/16
1-13/16
1-13/16
2-3/8
2-3/8
2-3/8
E
L
Bore
Length Length
9/16
9/16
9/16
9/16
9/16
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
2
2
2-1/2
2-1/2
3
2-1/2
2-1/2
3
3
3
3-5/8
3-5/8
3-5/8
.125 .310
.125 .435
.125 .435
.125 .560
.125 .560
.188 .713
.188 .838
.125 .560
.188 .713
.188 .838
.188 .713
.188 .838
.250 1.114
Max.
Misalignment Max.
Torque
Angular Lateral ozf in.
Offset Offset
1
1
1.5
1.5
2
1.5
1.5
2
2
2
3
3
3
.010
.010
.015
.015
.020
.015
.015
.020
.020
.020
.025
.025
.025
500
500
400
400
300
500
500
400
400
400
600
600
600
9
10
11
12
13
14
15
6-21
16
BELLOWS COUPLINGS
CLAMP TYPE
R
T
1
2
MATERIAL:
Inch
Hubs - Anodized Aluminum

Bellows - Stainless Steel, Polished
FEATURES:
Constant-velocity ratio.
Corrosion-resistant throughout.
Backlash-free.
Compact.
Low inertia.
Low cost.
3
4
D
(TYP)
5
6
CAP
SCREW
7
8
9
10
11
12
INCH COMPONENT
Catalog Number *
S50DY9-CA1504
S50DY9-CA1904
S50DY9-CA2304
S50DY9-CA2306
S50DY9-CB2010
S50DY9-CB2510
S50DY9-CB3010
S50DY9-CC2310
S50DY9-CC2810
S50DY9-CC3310
.125
.125
.125
.1875
.3125
.3125
.3125
.3125
.3125
.3125
.60
.60
.60
.60
.86
.86
.86
1-1/8
1-1/8
1-1/8
.57
.57
.57
.57
.79
.79
.79
.87
.87
.87
13
14
15
16
Max.
A
E
B
F
D
L
Misalignment Max.
Bore Hub Bellows Hub Clearance Overall Cap
Torque
+.001
O.D. Width Radius Length Screw Angular Lateral ozf in.
-.000 Dia.
Offset Offset
6-22
3/16
3/16
3/16
3/16
1/4
1/4
1/4
5/16
5/16
5/16
.34
.34
.34
.34
.48
.48
.48
.60
.60
.60
15/16
1-3/16
1-7/16
1-7/16
1-1/4
1-9/16
1-7/8
1-7/16
1-3/4
2-1/16
#2-56
#2-56
#2-56
#2-56
#4-40
#4-40
#4-40
#6-32
#6-32
#6-32
2-1/2
5
7
7
5
7
10
5
7
10
.005
.010
.015
.015
.010
.020
.030
.010
.020
.030
70
60
50
50
80
70
50
150
150
100
BELLOWS COUPLINGS
REGULAR TYPE
MATERIAL:
Inch
Stainless Steel, Polished
FEATURES:
Constant-velocity ratio.
Corrosion-resistant throughout.
Backlash-free.
Compact.
Low inertia.
Low cost.
T
1
2
* No angular relationship of set screw location.
3
4
*SET SCREW
L
D
(TYP)
B
(TYP)
6
A
(TYP)
7
8
INCH COMPONENT
Catalog Number
S50PY9-RA1404
S50PY9-RA1804
S50PY9-RA2204
S50PY9-RA2206
S50PY9-RB2010
S50PY9-RB3010
S50PY9-RC2210
S50PY9-RC3210
A
Bore
+.001
-.000
B
Hub
Dia.
C
O.D.
.125
.125
.125
.1875
.3125
.3125
.3125
.3125
.42
.42
.42
.42
.61
.61
.67
.67
9/16
9/16
9/16
9/16
25/32
25/32
7/8
7/8
3/32
3/32
3/32
3/32
1/8
1/8
5/32
5/32
Max.
L
Misalignment Max.
Set
Torque
Overall Screw
Angular Lateral ozf in.
Length
Offset Offset
29/32
1-11/64
1-13/32
1-13/32
1-1/4
1-7/8
1-3/8
2
#4-40
#4-40
#4-40
#4-40
#6-32
#6-32
#6-32
#6-32
2-1/2
5
7
7
5
12
5
10
.005
.015
.025
.025
.010
.050
.010
.050
100
80
60
60
130
50
220
100
9
10
11
12
13
14
15
6-23
16
HELICAL COUPLING GUIDE

The Helical Couplings featured offer you unprecedented design freedomand freedom of choice. To help you select the
coupling that will best match your specific parameters, we have prepared this Helical Coupling Selection Guide.
Inch
The following pages highlight features and display technical data for each of the six model series.
Information covered on each page includes:
Dimensional data Special notes
Performance data Ordering information
1
2
High Torque Capacity
High Fatigue Resistance

High Torsional Stiffness
4
5
6
Light-Duty, Low Maintenance
High Corrosion Resistance
Non-Magnetic
Large Shaft Diameters
Industrial Motor Shaft

Couplings
11
Low Radial Loads
Integral Clamp Attachment
10
Large Parallel Misalignment

Capacity
SERIES
HWH
HWM
G409 & G410
HAM
HAD
HAA
Stainless Steel Stainless Aluminum Stainless Aluminum Aluminum
Steel
Steel
FEATURES
Set Screw Attachment
pg. 6-25
pg. 6-26
pg. 6-28
pg. 6-30
pg. 6-32
pg. 6-34
pg. 6-25
pg. 6-27
pg. 6-29
pg. 6-31
pg. 6-33
N/A
High-Speed Capability
One-Piece Construction /
No Backlash
Catalog Split Hub Type

Page Set Screw Type
* G409 Series Only
12
13
G409 & G410

Stainless Steel
HWH Split Hub Type
HWH Set Screw Type
HAA Split Hub Type
HAA Set Screw Type
14
15
16
HWM Split Hub Type
6-24
HWM Set Screw Type
HAM Split Hub Type
HAM Set Screw Type
HAD Split Hub Type
FLEXIBLE HELICAL COUPLINGS

PAT. NO. 3,068,666
ZERO BACKLASH
R
Inch
MATERIAL:
303 Stainless Steel
Precision
Component

Max. Axial Motion: 0
T
1
FEATURES:
One-piece construction.
Constant velocity.
Other sizes and bores available on special order.
C
(TYP)
1/16 (-01 to -07)

3/32 (-08 to -17)
SET SCREW
B1
B2 D
G1
B1
B2
F
(TYP)
FOR CLAMPS,
SEE INDEX
J
Set Screw Type
G2
5
6
Clamp Type
7
D
Dia.
Set Screw
1/4
15/32
1/8
1/4
3/8
3/4
1/8
5/16
1/8
9/32
3/8
15/16
#1-72
#4-40
8
9
INCH COMPONENT
Catalog Number
B1
Dia.
B2
Dia.
G1
Dia.
G2
Dia.
Set Screw Type
Clamp Type
+.0005
-.0000
+.0005
-.0000
+.000
-.001
+.000
-.001
S5904Y-G409-01
S5904Y-G409-02
S5904Y-G409-03
S5904Y-G409-04
S5904Y-G409-05
S5904Y-G409-06
S5904Y-G409-07
S5904Y-G409-08
S5904Y-G409-09
S5904Y-G409-10
S5904Y-G409-11
S5904Y-G409-12
S5904Y-G409-13
S5904Y-G409-14
S5904Y-G409-15
S5904Y-G409-16
S5904Y-G409-17
S5904Y-G410-01
S5904Y-G410-02
S5904Y-G410-03
S5904Y-G410-04
S5904Y-G410-05
S5904Y-G410-06
S5904Y-G410-07
S5904Y-G410-08
S5904Y-G410-09
S5904Y-G410-10
S5904Y-G410-11
S5904Y-G410-12
S5904Y-G410-13
S5904Y-G410-14
S5904Y-G410-15
S5904Y-G410-16
S5904Y-G410-17
.0900
.0935
.1200
.1248
.0900
.0935
.1200
.1200
.1248
.1873
.2498
.1200
.1200
.1200
.1248
.1248
.1873
.0900
.0935
.1200
.1248
.1248
.1248
.1248
.1200
.1248
.1873
.2498
.1248
.1873
.2498
.1873
.2498
.2498
.187
.187
.187
.187
.187
.187
.187
.187
.187
.250
.312
.187
.187
.187
.187
.187
.250
.187
.187
.187
.187
.187
.187
.187
.187
.187
.250
.312
.187
.250
.312
.250
.312
.312
D
Dia.
1/4
1/4
1/4
1/4
1/4
1/4
1/4
15/32
15/32
15/32
15/32
15/32
15/32
15/32
15/32
15/32
15/32
Working Torsional
Torque Deflection
ozf in.
Arc Min. /
ozf in.
20
20
20
20
20
20
20
80
80
80
80
80
80
80
80
80
80
8
8
8
8
8
8
8
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
6-25
10
11
12
13
14
15
16
I
R
SHORT SERIES FLEXIBLE HELICAL COUPLINGS

SPLIT HUB TYPE
ZERO BACKLASH
Inch
MATERIAL:
Coupling - 17-4PH Stainless Steel, Heat-Treated to H900

Cap Screw - Alloy Steel
1
2
3
4

Max. Axial Motion: .010
FEATURES:
Integral clamp.
Shaft relief.
High fatigue resistance.
Constant velocity.
For NONREVERSING applications, the torque rating is 1/2.

For REVERSING applications, the torque rating is 1/4.
Bore diameter combinations are available on special order.
5
L
6
7
8
9
10
11
12
13
INCH COMPONENT
Catalog Number
S50HWH-037H0303
S50HWH-050H0303
S50HWH-050H0404
S50HWH-062H0404
S50HWH-062H0505
S50HWH-062H0606
S50HWH-075H0404
S50HWH-075H0505
S50HWH-075H0606
S50HWH-075H0808
S50HWH-087H0606
S50HWH-087H0808
S50HWH-087H1010
S50HWH-100H0808
S50HWH-100H1010
S50HWH-100H1212
S50HWH-112H0808
S50HWH-112H1010
S50HWH-112H1212
S50HWH-112H1616
3/8
1/2
1/2
5/8
5/8
5/8
3/4
3/4
3/4
3/4
7/8
7/8
7/8
1
1
1
1-1/8
1-1/8
1-1/8
1-1/8
B
Bore
+.002
-.000
.094
.094
.125
.125
.157
.188
.125
.157
.188
.250
.188
.250
.313
.250
.313
.375
.250
.313
.375
.500
L
Length
.01
.56
.75
.75
.80
.80
.80
.90
.90
.90
.90
1.06
1.06
1.06
1.25
1.25
1.25
1.50
1.50
1.50
1.50
* Torque listed is maximum momentary value.

Inertia is based on the smallest standard bore diameter.
14
15
16
D
O.D.
6-26
Torsional
Cap Momentary*
Dynamic Deflection
Screw
Torque
Arc Min. /
Size
lbf in.
#0-80
#1-72
#1-72
#2-56
#2-56
#2-56
#4-40
#4-40
#4-40
#4-40
#6-32
#6-32
#6-32
#6-32
#6-32
#6-32
#6-32
#6-32
#6-32
#6-32
2.4
7.5
7
14
13
12
21
20
20
17
37
34
30
52
47
42
83
78
71
55
lbf in.
90
21.6
28.8
11.4
14.4
18.6
6.6
7.8
9.6
15
4.32
6
9
3.72
5.16
7.2
2.1
2.7
3.66
7.2
Inertia
x 10-5
lbf in. sec.2

.070
.31
.31
.78
.78
.78
1.8
1.8
1.8
1.8
4.1
4.1
4.1
8.3
8.3
8.3
15.6
15.6
15.6
15.6

SET SCREW TYPE
ZERO BACKLASH
R
Inch
MATERIAL:

Set Screws - Alloy Steel
FEATURES:
Shaft relief.
Constant velocity.

120
5
L
INCH COMPONENT
Catalog Number
S50HWH-037P0303
S50HWH-050P0303
S50HWH-050P0404
S50HWH-062P0404
S50HWH-062P0505
S50HWH-062P0606
S50HWH-075P0404
S50HWH-075P0505
S50HWH-075P0606
S50HWH-075P0808
S50HWH-087P0606
S50HWH-087P0808
S50HWH-087P1010
S50HWH-100P0808
S50HWH-100P1010
S50HWH-100P1212
S50HWH-112P0808
S50HWH-112P1010
S50HWH-112P1212
S50HWH-112P1616
D
O.D.
3/8
1/2
1/2
5/8
5/8
5/8
3/4
3/4
3/4
3/4
7/8
7/8
7/8
1
1
1
1-1/8
1-1/8
1-1/8
1-1/8
B
Bore
+.002
-.000
.094
.094
.125
.125
.157
.188
.125
.157
.188
.250
.188
.250
.313
.250
.313
.375
.250
.313
.375
.500
L
Length
.01
.37
.50
.50
.62
.62
.62
.75
.75
.75
.75
.87
.87
.87
1.00
1.00
1.00
1.12
1.12
1.12
1.12
Momentary* Torsional
Set
Dynamic Deflection
Screw
Torque
Arc Min. /
#1-72
#2-56
#2-56
#4-40
#4-40
#4-40
#6-32
#6-32
#6-32
#6-32
#6-32
#6-32
#6-32
#6-32
#10-32
#10-32
#10-32
#10-32
#10-32
#10-32
lbf in.
2.4
7.5
7
14
13
12
21
20
20
17
37
34
30
52
47
42
83
78
71
55
lbf in.
90
21.6
28.8
11.4
14.4
18.6
6.6
7.8
9.6
15
4.32
6
9
3.72
5.16
7.2
2.1
2.7
3.66
7.2
Inertia
x 10-5
lbf in. sec.2

.043
.19
.19
.58
.58
.58
1.5
1.5
1.5
1.5
3.3
3.3
3.3
6.5
6.5
6.5
11.3
11.3
11.3
11.3

7
8
9
10
11
12
13
14
15
6-27
16
I
R

SPLIT HUB TYPE
ZERO BACKLASH
Inch
MATERIAL:
Coupling - 7075-T6 Aluminum

FINISH:
1
2
3
4
5
Clear Anodized
FEATURES:
Integral clamp.
Shaft relief.
Nonmagnetic.
Constant velocity.
B

6
INCH COMPONENT
7
8
9
10
11
12
13
Catalog Number
S50HAA-037H0303
S50HAA-050H0303
S50HAA-050H0404
S50HAA-062H0404
S50HAA-062H0505
S50HAA-062H0606
S50HAA-075H0404
S50HAA-075H0505
S50HAA-075H0606
S50HAA-075H0808
S50HAA-087H0606
S50HAA-087H0808
S50HAA-087H1010
S50HAA-100H0808
S50HAA-100H1010
S50HAA-100H1212
S50HAA-112H0808
S50HAA-112H1010
S50HAA-112H1212
S50HAA-112H1616
3/8
1/2
1/2
5/8
5/8
5/8
3/4
3/4
3/4
3/4
7/8
7/8
7/8
1
1
1
1-1/8
1-1/8
1-1/8
1-1/8
B
Bore
+.002
-.000
.094
.094
.125
.125
.157
.188
.125
.157
.188
.250
.188
.250
.313
.250
.313
.375
.250
.313
.375
.500
L
Length
.01
.56
.75
.75
.80
.80
.80
.90
.90
.90
.90
1.06
1.06
1.06
1.25
1.25
1.25
1.50
1.50
1.50
1.50

14
15
16
D
O.D.
6-28
Screw
Size
#0-80
#1-72
#1-72
#2-56
#2-56
#2-56
#4-40
#4-40
#4-40
#4-40
#6-32
#6-32
#6-32
#6-32
#6-32
#6-32
#6-32
#6-32
#6-32
#6-32
Dynamic Deflection
Torque
Arc Min. /
lbf in.
1.2
3.7
3.5
7.1
6.7
6.2
10
10
9.8
8.6
19
17
15
27
24
22
43
40
37
28
lbf in.
252
58.8
78
30.6
39.6
51.6
17.4
21.6
26.4
40.8
12
16.8
24.6
10.2
14.4
19.8
5.64
7.2
10.2
19.2
Inertia
x 10-5
lbf in. sec.2

.025
.11
.11
.28
.28
.28
.66
.66
.66
.66
1.5
1.5
1.5
3.0
3.0
3.0
5.6
5.6
5.6
5.6

SET SCREW TYPE
ZERO BACKLASH
R
Inch
MATERIAL:

FINISH:
Clear Anodized
FEATURES:
Shaft relief.
Nonmagnetic.
Constant velocity.
Adapts to high- and low-speed applications.
Misalignment compensation.
120
4
B

6
INCH COMPONENT
Catalog Number
D
O.D.
S50HAA-037P0303
S50HAA-050P0303
S50HAA-050P0404
S50HAA-062P0404
S50HAA-062P0505
S50HAA-062P0606
S50HAA-075P0404
S50HAA-075P0505
S50HAA-075P0606
S50HAA-075P0808
S50HAA-087P0606
S50HAA-087P0808
S50HAA-087P1010
S50HAA-100P0808
S50HAA-100P1010
S50HAA-100P1212
S50HAA-112P0808
S50HAA-112P1010
S50HAA-112P1212
S50HAA-112P1616
3/8
1/2
1/2
5/8
5/8
5/8
3/4
3/4
3/4
3/4
7/8
7/8
7/8
1
1
1
1-1/8
1-1/8
1-1/8
1-1/8
B
Bore
+.002
-.000
.094
.094
.125
.125
.157
.188
.125
.157
.188
.250
.188
.250
.313
.250
.313
.375
.250
.313
.375
.500
L
Length
.01
.37
.50
.50
.62
.62
.62
.75
.75
.75
.75
.87
.87
.87
1.00
1.00
1.00
1.12
1.12
1.12
1.12
Screw
Size
#1-72
#2-56
#2-56
#4-40
#4-40
#4-40
#6-32
#6-32
#6-32
#6-32
#6-32
#6-32
#6-32
#10-24
#10-24
#10-24
#10-24
#10-24
#10-24
#10-24
Dynamic Deflection
Torque
Arc Min. /
lbf in.
1.2
3.7
3.5
7.1
6.7
6.2
10
10
9.8
8.6
19
17
15
27
24
22
43
40
37
28
lbf in.
252
58.8
78
30.6
39.6
51.6
17.4
21.6
26.4
40.8
12
16.8
24.6
10.2
14.4
19.8
5.64
7.2
10.2
19.2
Inertia
x 10-5
lbf in. sec.2

.016
.069
.069
.21
.21
.21
.54
.54
.54
.54
1.2
1.2
1.2
2.3
2.3
2.3
4.1
4.1
4.1
4.1

8
9
10
11
12
13
14
15
6-29
16
I
R
LONG SERIES FLEXIBLE HELICAL COUPLINGS

SPLIT HUB TYPE
HIGH TORQUE CAPACITY
INDUSTRIAL MOTOR SHAFT COUPLINGS
ZERO BACKLASH
Inch
MATERIAL:


FEATURES:
3
4
5
Integral clamp.
Shaft relief
Constant velocity.


L
6
INCH COMPONENT
7
8
9
10
11
12
Catalog Number
S50HWM-100H0808
S50HWM-100H1010
S50HWM-100H1212
S50HWM-125H1010
S50HWM-125H1212
S50HWM-125H1616
S50HWM-125H2020
S50HWM-150H1212
S50HWM-150H1616
S50HWM-150H2020
S50HWM-200H1616
S50HWM-200H2020
S50HWM-200H2424
S50HWM-225H2020
S50HWM-225H2424
S50HWM-225H2828
S50HWM-225H3232
1
1
1
1-1/4
1-1/4
1-1/4
1-1/4
1-1/2
1-1/2
1-1/2
2
2
2
2-1/4
2-1/4
2-1/4
2-1/4
B
Bore
+.002
-.000
.250
.313
.375
.313
.375
.500
.625
.375
.500
.625
.500
.625
.750
.625
.750
.875
1.000
L
Length
.01
1.75
1.75
1.75
2.37
2.37
2.37
2.37
2.62
2.62
2.62
3.00
3.00
3.00
3.50
3.50
3.50
3.50

13
14
15
16
D
O.D.
6-30
Torsional
Cap Momentary*
Dynamic Deflection
Screw
Torque
Arc Min. /
Size
lbf in.
#6-32
#6-32
#6-32
#10-32
#10-32
#10-32
#10-32
#10-32
#10-32
#10-32
1/4-28
1/4-28
1/4-28
1/4-28
1/4-28
1/4-28
1/4-28
51
46
40
98
91
74
54
194
170
140
347
319
282
556
510
454
392
lbf in.
5.88
8.4
11.4
2.88
3.72
6.6
12.6
1.44
2.22
3.6
.78
1.08
1.5
.54
.72
.96
1.38
Inertia
x 10-4
lbf in. sec.2

1.1
1.1
1.1
3.8
3.8
3.8
3.8
8.7
8.7
8.7
31.9
31.9
31.9
60.0
60.0
60.0
60.0

SET SCREW TYPE
ZERO BACKLASH
R
Inch
MATERIAL:

T
1
FEATURES:
Shaft relief.
Corrosion-resistant.
Constant velocity.
3
4
120
For NONREVERSING applications, the torque

rating is 1/2.
For REVERSING applications, the torque
rating is 1/4.
Bore diameter combinations are available

on special order.
6
INCH COMPONENT
Catalog Number
D
O.D.
S50HWM-100P0808
S50HWM-100P1010
S50HWM-100P1212
S50HWM-125P1010
S50HWM-125P1212
S50HWM-125P1616
S50HWM-125P2020
S50HWM-150P1212
S50HWM-150P1616
S50HWM-150P2020
S50HWM-200P1616
S50HWM-200P2020
S50HWM-200P2424
S50HWM-225P2020
S50HWM-225P2424
S50HWM-225P2828
S50HWM-225P3232
1
1
1
1-1/4
1-1/4
1-1/4
1-1/4
1-1/2
1-1/2
1-1/2
2
2
2
2-1/4
2-1/4
2-1/4
2-1/4
B
Bore
+.002
-.000
.250
.313
.375
.313
.375
.500
.625
.375
.500
.625
.500
.625
.750
.625
.750
.875
1.000
L
Length
.01
1.75
1.75
1.75
2.37
2.37
2.37
2.37
2.62
2.62
2.62
3.00
3.00
3.00
3.50
3.50
3.50
3.50
Set
Screw
#10-32
#10-32
#10-32
1/4-28
1/4-28
1/4-28
1/4-28
1/4-28
1/4-28
1/4-28
1/4-28
1/4-28
1/4-28
1/4-28
1/4-28
1/4-28
1/4-28
Dynamic Deflection
Torque
Arc Min. /
lbf in.
51
46
40
98
91
74
54
194
170
140
347
319
282
556
510
454
392
lbf in.
5.88
8.4
11.4
2.88
3.72
6.6
12.6
1.44
2.22
3.6
.78
1.08
1.5
.54
.72
.96
1.38
Inertia
x 10-4
lbf in. sec.2

1.1
1.1
1.1
3.8
3.8
3.8
3.8
8.7
8.7
8.7
31.9
31.9
31.9
60.0
60.0
60.0
60.0

8
9
10
11
12
13
14
15
6-31
16
I
R

SPLIT HUB TYPE
ZERO BACKLASH
MATERIAL:
FINISH:
Inch

Cap Screws - Alloy Steel
Clear Anodized
2
3
4
5
6
7
8
9
10
11
12
FEATURES:
Integral clamp.
Shaft relief.
Nonmagnetic.
Constant velocity.
B
INCH COMPONENT
Catalog Number
S50HAM-100H0808
S50HAM-100H1010
S50HAM-100H1212
S50HAM-125H1010
S50HAM-125H1212
S50HAM-125H1616
S50HAM-150H1212
S50HAM-150H1616
S50HAM-200H1616
S50HAM-200H2020
S50HAM-225H2020
S50HAM-225H2424
S50HAM-225H2828
D
O.D.
1
1
1
1-1/4
1-1/4
1-1/4
1-1/2
1-1/2
2
2
2-1/4
2-1/4
2-1/4
B
Bore
+.002
-.000
.250
.313
.375
.313
.375
.500
.375
.500
.500
.625
.625
.750
.875
L
Length
.01
1.75
1.75
1.75
2.37
2.37
2.37
2.62
2.62
3.00
3.00
3.50
3.50
3.50

13
14
15
16

6-32
Torsional
Cap Momentary*
Dynamic Deflection
Screw
Torque
Arc Min. /
Size
lbf in.
#6-32
#6-32
#6-32
#10-24
#10-24
#10-24
#10-24
#10-24
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
26
23
20
51
47
38
100
88
178
164
286
262
233
lbf in.
16.2
22.2
31.8
7.8
10.2
18
3.9
6
2.1
2.94
1.44
1.92
2.64
Inertia
x 10-4
lbf in. sec.2

.41
.41
.41
1.3
1.3
1.3
3.1
3.1
11.4
11.4
21.5
21.5
21.5

SET SCREW TYPE
ZERO BACKLASH
R
Inch
MATERIAL:

FINISH:
Clear Anodized

FEATURES:
Shaft relief.
Nonmagnetic.
Constant velocity.
4
120
For NONREVERSING applications, the torque

rating is 1/2.
For REVERSING applications, the torque
rating is 1/4.
5
6
INCH COMPONENT
Catalog Number
S50HAM-100P0808
S50HAM-100P1010
S50HAM-100P1212
S50HAM-125P1010
S50HAM-125P1212
S50HAM-125P1616
S50HAM-150P1212
S50HAM-150P1616
S50HAM-200P1616
S50HAM-200P2020
S50HAM-225P2020
S50HAM-225P2424
S50HAM-225P2828
D
O.D.
1
1
1
1-1/4
1-1/4
1-1/4
1-1/2
1-1/2
2
2
2-1/4
2-1/4
2-1/4
B
Bore
+.002
-.000
.250
.313
.375
.313
.375
.500
.375
.500
.500
.625
.625
.750
.875
L
Length
.01
1.75
1.75
1.75
2.37
2.37
2.37
2.62
2.62
3.00
3.00
3.50
3.50
3.50
Set
Dynamic Deflection
Screw
Torque
Arc Min. /
#10-24
#10-24
#10-24
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
lbf in.
26
23
20
51
47
38
100
88
178
164
286
262
233
lbf in.
16.2
22.2
31.8
7.8
10.2
18
3.9
6
2.1
2.94
1.44
1.92
2.64
7
Inertia
x 10-4
lbf in. sec.2

.41
.41
.41
1.3
1.3
1.3
3.1
3.1
11.4
11.4
21.5
21.5
21.5

8
9
10
11
12
13
14
15
6-33
16
I
R
T
1
2
3
4
5
LOW-INERTIA FLEXIBLE HELICAL COUPLINGS

SPLIT HUB TYPE
HIGH TORSIONAL STIFFNESS
ZERO BACKLASH
Inch
MATERIAL:

FINISH:
Clear Anodized
FEATURES:
Integral clamp.
Shaft relief.
Nonmagnetic.
Constant velocity.

7
INCH COMPONENT
8
9
10
11
12
13
Catalog Number
D
O.D.
S50HAD-075H0606
S50HAD-075H0808
S50HAD-100H0808
S50HAD-100H1010
S50HAD-100H1212
S50HAD-125H1010
S50HAD-125H1212
S50HAD-125H1616
S50HAD-125H2020
S50HAD-150H1212
S50HAD-150H1616
S50HAD-150H2020
S50HAD-200H1616
S50HAD-200H2020
S50HAD-200H2424
3/4
3/4
1
1
1
1-1/4
1-1/4
1-1/4
1-1/4
1-1/2
1-1/2
1-1/2
2
2
2
+.002
-.000
.188
.250
.250
.313
.375
.313
.375
.500
.625
.375
.500
.625
.500
.625
.750
L
Length
.01
1.25
1.25
1.50
1.50
1.50
1.75
1.75
1.75
1.75
2.25
2.25
2.25
2.50
2.50
2.50

14
15
16
B
Bore
6-34
Torsional
Cap Momentary*
Dynamic Deflection
Screw
Torque
Arc Min. /
Size
lbf in.
lbf in.
#4-40
#4-40
#6-32
#6-32
#6-32
#10-24
#10-24
#10-24
#10-24
#10-24
#10-24
#10-24
1/4-20
1/4-20
1/4-20
14
12
31
29
25
61
58
47
35
130
115
94
234
215
190
18
24
7.8
9.6
11.4
3.72
4.8
7.2
11.4
1.8
2.52
3.72
.96
1.2
1.56
Inertia
x 10-4
lbf in. sec.2

.091
.091
.35
.35
.35
.98
.98
.98
.98
2.7
2.7
2.7
9.5
9.5
9.5
SLIT TYPE FLEXIBLE COUPLING GUIDE

The Flexible Couplings featured offer you unprecedented design freedomand freedom of choice. To help you select the
coupling that will best match your specific parameters, we have prepared this Slit Type Flexible Coupling Selection Guide.
Inch
The following pages highlight features and display technical data for each of the four model series.
Information covered on each page includes:
Dimensional data Special notes
Performance data Ordering information
SERIES
FEATURES
MSC
MST
MSK
MSX
High Torque Capacity
High Flexibility
Nonmagnetic
Compactness
Keyway
Large Shaft Diameters
One-Piece Construction/
No Backlash
Split Hub Type

Catalog
Page
3
4
pgs. 6-36 & 6-37
pg. 6-42
pgs. 6-38 & 6-39 pgs. 6-40 & 6-41
Set Screw Type
High-Speed Capability
Aluminum
pg. 6-37
pg. 6-39
pg. 6-41
Stainless Steel
pg. 6-36
pg. 6-38
pg. 6-40
pg. 6-43
pgs. 6-42 & 6-43
7
8
9
10
11
MSC Stainless Steel
MSC Aluminum
MST Stainless Steel
MST Aluminum
12
13
MSK Stainless Steel
MSK Aluminum
MSX Spilt Hub Type
MSX Set Screw Type
14
15
6-35
16
I
R
T
SLIT TYPE MSC FLEXIBLE COUPLINGS

SPLIT HUB TYPE
ZERO BACKLASH
Inch
MATERIAL:
Stainless Steel
SPECIFICATION:
2
3
Recommended Tolerance on Shaft:

.1250 & .1875 +.0000/-.0005
.2500 & .3750 +.0000/-.0006
.5000 & .6250 +.0000/-.0007
.7500 & 1.0000 +.0000/-.0008
Other bore diameter combinations and bore sizes not exceeding

the maximum listed below are available on special order.
L
L
CAP
SCREW
4
B
5
6
7
8
9
10
11
12
13
14
15
CAP
D
SCREW
Catalog Number
Fig. 1
S50MSC-S02H12H12
S50MSC-S02H18H18
S50MSC-S03H12H12
S50MSC-S03H18H18
S50MSC-S04H18H18
S50MSC-S04H25H25
S50MSC-S05H25H25
S50MSC-S05H37H37
S50MSC-S06H37H37
S50MSC-S06H50H50
Fig. 2
S50MSC-S07H37H37
S50MSC-S07H50H50
S50MSC-S08H50H50
S50MSC-S08H62H62
S50MSC-S09H75H75
S50MSC-S09H99H99
Coupling Series
(Ref. Only)
S50MSC-S02H...
S50MSC-S03H...
S50MSC-S04H...
S50MSC-S05H...
S50MSC-S06H...
S50MSC-S07H...
S50MSC-S08H...
S50MSC-S09H...
6-36
B
CAP
SCREW
O.D.
Fig. 1
INCH COMPONENT
Based on Max. Bore.
16
O.D.
Fig. 2
O.D.
B
Bore
L
Length
Cap
Screw
Max.
Bore
.472
.472
.630
.630
.787
.787
.984
.984
1.26
1.26
.1250
.1875
.1250
.1875
.1875
.2500
.2500
.3750
.3750
.5000
.728
.728
.906
.906
1.024
1.024
1.220
1.220
1.61
1.61
.197
.197
.256
.256
.295
.295
.335
.335
.472
.472
#2-56
#2-56
#4-40
#4-40
#4-40
#4-40
#6-32
#6-32
#8-32
#8-32
.1969
.1969
.2362
.2362
.3150
.3150
.3937
.3937
.5512
.5512
1.57
1.57
1.97
1.97
2.48
2.48
.3750
.5000
.5000
.6250
.7500
1.0000
2.20
2.20
2.80
2.80
3.54
3.54
.669
.669
.827
.827
1.024
1.024
#10-24
#10-24
1/4-20
1/4-20
5/16-18
5/16-18
.7087
.7087
.8661
.8661
1.1811
1.1811
Rated
Torque
lbf in.
2.66
4.43
8.85
17.70
30.98
70.81
132.76
309.78
Max.
rpm
52000
39000
31000
25000
19000
15000
12000
10000
Static
Moment of Torsional
Inertia Stiffness
oz. in.2
.012
.049
.136
.388
1.476
4.920
15.308
48.110
lbf in. / deg

9.89
13.13
38.62
50.98
131.30
154.48
216.27
278.06
Max.
Lateral
Offset
Max.
Axial
Motion
Weight
.004
.004
.004
.006
.006
.008
.008
.008
.008
.012
.012
.015
.020
.020
.020
.020
.35
.88
1.52
2.75
6.00
13.06
26.48
49.42
oz.
SLIT TYPE MSC FLEXIBLE COUPLINGS

SPLIT HUB TYPE
ZERO BACKLASH
R
Inch
MATERIAL:
Anodized Aluminum
SPECIFICATION:

.1250 & .1875 +.0000/-.0005
.2500 & .3750 +.0000/-.0006
.5000 & .6250 +.0000/-.0007
.7500 & 1.0000 +.0000/-.0008
Other bore diameter combinations and bore sizes

not exceeding the maximum listed below are
L
CAP
SCREW**
** One cap screw each end until present stock

is depleted. After that, all items will have two
cap screws each end.
4
O.D.
B
CAP
SCREW** D
INCH COMPONENT
Catalog Number
O.D.
B
Bore
L
Length
Cap
Screw
Max.
Bore
S50MSC-A02H12H12
S50MSC-A02H18H18
S50MSC-A03H12H12
S50MSC-A03H18H18
S50MSC-A04H18H18
S50MSC-A04H25H25
S50MSC-A05H25H25
S50MSC-A05H37H37
S50MSC-A06H37H37
S50MSC-A06H50H50
S50MSC-A07H37H37
S50MSC-A07H50H50
S50MSC-A08H50H50
S50MSC-A08H62H62
S50MSC-A09H75H75
S50MSC-A09H99H99
.472
.472
.630
.630
.787
.787
.984
.984
1.26
1.26
1.57
1.57
1.97
1.97
2.48
2.48
.1250
.1875
.1250
.1875
.1875
.2500
.2500
.3750
.3750
.5000
.3750
.5000
.5000
.6250
.7500
1.0000
.728
.728
.906
.906
1.024
1.024
1.220
1.220
1.61
1.61
2.20
2.20
2.80
2.80
3.54
3.54
.197
.197
.256
.256
.295
.295
.335
.335
.472
.472
.669
.669
.827
.827
1.024
1.024
#2-56
#2-56
#4-40
#4-40
#4-40
#4-40
#6-32
#6-32
#8-32
#8-32
#10-24
#10-24
1/4-20
1/4-20
5/16-18
5/16-18
.1969
.1969
.2362
.2362
.3150
.3150
.3937
.3937
.5512
.5512
.7087
.7087
.8661
.8661
1.1811
1.1811
Coupling Series
(Ref. Only)
S50MSC-A02H...
S50MSC-A03H...
S50MSC-A04H...
S50MSC-A05H...
S50MSC-A06H...
S50MSC-A07H...
S50MSC-A08H...
S50MSC-A09H...
Rated
Torque
Max.
3.5
4.4
8.9
17.7
35.4
70.8
141.6
283.2
52000
39000
31000
25000
19000
15000
12000
10000
lbf in.
rpm
Moment of Static
Inertia Torsional
Stiffness
oz. in.2
.0043
.0186
.0497
.1421
.530
1.804
5.467
17.494
lbf in. / deg

6.95
12.36
26.27
58.71
77.25
108.15
278.1
479.0
Max.
Lateral
Offset
Max.
Axial
Motion
Weight
.004
.004
.004
.006
.006
.008
.008
.008
.012
.016
.016
.020
.020
.020
.020
.020
.13
.32
.56
.99
2.26
4.94
9.53
18.71
oz.
7
8
9
10
11
12
13
14
15
Based on Max. Bore.
6-37
16
I
R
T
SLIT TYPE MST FLEXIBLE COUPLINGS

SET SCREW TYPE
ZERO BACKLASH
Inch
MATERIAL:
Stainless Steel
SPECIFICATION:
2
3
4
Bore Tolerance: .1250 & .1875 +.0007/-.0000

.2500 & .3750 +.0009/-.0000
.5000 & .6250 +.0011/-.0000
.7500 +.0013/-.0000
Other bore diameter combinations and bore

sizes not exceeding the maximum listed below
SET SCREW**
2 AT 90
** Couplings with bore diameters B of .1575 or less

have one set screw at each end.
O.D.
5
D
INCH COMPONENT
Catalog Number
O.D.
B
Bore
L
Length
Set
Screw
Max.
Bore
** S50MST-S01P12P12
S50MST-S02P18P18
S50MST-S03P25P25
S50MST-S04P25P25
S50MST-S04P37P37
S50MST-S05P25P25
S50MST-S05P37P37
S50MST-S06P37P37
S50MST-S06P50P50
S50MST-S07P50P50
S50MST-S07P62P62
S50MST-S08P50P50
S50MST-S08P62P62
S50MST-S09P62P62
S50MST-S09P75P75
.315
.472
.630
.787
.787
.984
.984
1.260
1.260
1.570
1.570
1.970
1.970
2.480
2.480
.1250
.1875
.2500
.2500
.3750
.2500
.3750
.3750
.5000
.5000
.6250
.5000
.6250
.6250
.7500
.551
.728
.906
1.024
1.024
1.220
1.220
1.610
1.610
2.200
2.200
2.800
2.800
3.540
3.540
.138
.197
.256
.295
.295
.335
.335
.472
.472
.669
.669
.827
.827
1.024
1.024
#2-56
#4-40
#4-40
#4-40
#4-40
#6-32
#6-32
#6-32
#6-32
#10-24
#10-24
1/4-20
1/4-20
5/16-18
5/16-18
.1575
.2362
.3150
.3937
.3937
.4724
.4724
.6299
.6299
.7874
.7874
.9843
.9843
1.3780
1.3780
8
9
10
11
12
13
14
15
16
Coupling Series
(Ref. Only)
S50MST-S01P...
S50MST-S02P...
S50MST-S03P...
S50MST-S04P...
S50MST-S05P...
S50MST-S06P...
S50MST-S07P...
S50MST-S08P...
S50MST-S09P...
Based on Max. Bore.
6-38
Rated
Torque
lbf in.
1.77
2.66
4.43
8.85
17.70
30.98
70.81
132.76
309.78
Max.
rpm
78000
52000
39000
31000
25000
19000
15000
12000
10000
Static
Moment of Torsional
Inertia Stiffness
oz. in.2
1.7 x 10-3
1.1 x 10-2
4.6 x 10-2
1.3 x 10-1
3.7 x 10-1
1.421
4.756
14.761
45.923
lbf in. / deg

7.724
9.886
13.130
38.619
50.977
131.300
154.480
216.270
278.060
Max.
Lateral
Offset
Max.
Axial
Motion
Weight
.004
.004
.004
.004
.006
.006
.008
.008
.008
.008
.012
.012
.012
.016
.020
.020
.020
.020
.11
.33
.74
1.34
2.51
5.65
12.36
24.71
45.89
oz.
SLIT TYPE MST FLEXIBLE COUPLINGS

SET SCREW TYPE
ZERO BACKLASH
R
Inch
MATERIAL:
Anodized Aluminum
SPECIFICATION:
Bore Tolerance: .1250 & .1875

.2500 & .3750
.5000 & .6250
.7500
1
+.0007/-.0000
+.0009/-.0000
+.0011/-.0000
+.0013/-.0000
Other bore diameter combinations and bore sizes

not exceeding the maximum listed below are
SET SCREW**
2 AT 90
** Couplings with bore diameters B of .1575 or less

have one set screw at each end.
O.D.
5
D
INCH COMPONENT
Catalog Number
O.D.
B
Bore
L
Length
Set
Screw
Max.
Bore
** S50MST-A01P12P12
S50MST-A02P18P18
S50MST-A03P25P25
S50MST-A04P25P25
S50MST-A04P37P37
S50MST-A05P25P25
S50MST-A05P37P37
S50MST-A06P37P37
S50MST-A06P50P50
S50MST-A07P50P50
S50MST-A07P62P62
S50MST-A08P50P50
S50MST-A08P62P62
S50MST-A09P62P62
S50MST-A09P75P75
.315
.472
.630
.787
.787
.984
.984
1.260
1.260
1.570
1.570
1.970
1.970
2.480
2.480
.1250
.1875
.2500
.2500
.3750
.2500
.3750
.3750
.5000
.5000
.6250
.5000
.6250
.6250
.7500
.551
.728
.906
1.024
1.024
1.220
1.220
1.610
1.610
2.200
2.200
2.800
2.800
3.540
3.540
.138
.197
.256
.295
.295
.335
.335
.472
.472
.669
.669
.827
.827
1.024
1.024
#2-56
#4-40
#4-40
#4-40
#4-40
#6-32
#6-32
#6-32
#6-32
#10-24
#10-24
1/4-20
1/4-20
5/16-18
5/16-18
.1575
.2362
.3150
.3937
.3937
.4724
.4724
.6299
.6299
.7874
.7874
.9843
.9843
1.3780
1.3780
Coupling Series
(Ref. Only)
S50MST-A01P...
S50MST-A02P...
S50MST-A03P...
S50MST-A04P...
S50MST-A05P...
S50MST-A06P...
S50MST-A07P...
S50MST-A08P...
S50MST-A09P...
Rated
Torque
lbf in.
.89
3.54
4.43
8.85
17.70
35.40
70.80
141.60
283.20
Max.
rpm
78000
52000
39000
31000
25000
19000
15000
12000
10000
Static
Moment of Torsional
Inertia Stiffness
oz. in.2
6.5 x 10-4
4.5 x 10-3
1.8 x 10-2
4.9 x 10-2
1.4 x 10-1
.525
1.750
5.467
17.494
lbf in. / deg

3.86
6.95
12.36
26.27
58.71
77.25
108.15
278.10
478.95
Max.
Lateral
Offset
Max.
Axial
Motion
Weight
.004
.004
.004
.004
.006
.006
.008
.008
.008
.008
.012
.016
.016
.020
.020
.020
.020
.020
.05
.13
.29
.49
.95
2.12
4.59
9.18
17.30
oz.
Based on Max. Bore.
6-39
7
8
9
10
11
12
13
14
15
16
I
R
T
SLIT TYPE MSK FLEXIBLE COUPLINGS

KEYWAY
ZERO BACKLASH
Inch
MATERIAL:
Stainless Steel
1
2
3
4

SPECIFICATION:
Bore Tolerance: .3750 +.0009/-.0000

.5000 & .6250 +.0011/-.0000
.7500 +.0013/-.0000

+.001
W -.000
KEYWAY DATA
(enlarged)
SET SCREW
2 at 90
6
7
8
9
10
11
12
13
Coupling Series
(Ref. Only)
Key Size
WxK
S50MSK-S13K...
S50MSK-S16K...
S50MSK-S20K...
S50MSK-S25K...
.125
.125
.188
.250
.060
.060
.088
.115
1/8 x 1/8
1/8 x 1/8
3/16 x 3/16
1/4 x 1/4
INCH COMPONENT
Catalog Number
O.D.
B
Bore
L
Length
Set
Screw
Max.
Bore
S50MSK-S13K38K38
S50MSK-S16K50K50
S50MSK-S20K63K63
S50MSK-S25K75K75
1.26
1.57
1.97
2.48
.3750
.5000
.6250
.7500
1.61
2.20
2.80
3.54
.472
.670
.827
1.024
#6-32
#10-24
1/4-20
5/16-18
.5512
.7087
.7874
1.1811
Rated
Torque
Max.
rpm
Moment of
Inertia*
Static
Torsional
Stiffness
19000
15000
12000
10000
1.42
4.70
15.31
46.47
Coupling Series
(Ref. Only)
S50MSK-S13K...
S50MSK-S16K...
S50MSK-S20K...
S50MSK-S25K...
* Based on Max. Bore.
14
15
16
O.D.
B
K +.006
-.000
6-40
lbf in.
30.98
70.81
132.76
309.78
oz.
in.2
lbf in. / deg

131.3
154.5
216.3
278.1
Max.
Lateral
Offset
.006
.008
.008
.008
Weight *
oz.
5.65
12.00
25.77
45.89
SLIT TYPE MSK FLEXIBLE COUPLINGS

KEYWAY
ZERO BACKLASH
R
Inch
MATERIAL:
Anodized Aluminum
SPECIFICATION:
Bore Tolerance: .3750 +.0009/-.0000

.5000 & .6250 +.0011/-.0000
.7500 +.0013/-.0000

+.001
W -.000
KEYWAY DATA
(enlarged)
SET SCREW
2 at 90
4
O.D.
B
K +.006
-.000
D
Coupling Series
(Ref. Only)
Key Size
WxK
S50MSK-126K...
S50MSK-157K...
S50MSK-197K...
S50MSK-248K...
.125
.125
.188
.250
.060
.060
.088
.115
1/8 x 1/8
1/8 x 1/8
3/16 x 3/16
1/4 x 1/4
INCH COMPONENT
Catalog Number
O.D.
B
Bore
L
Length
Set
Screw
Max.
Bore
S50MSK-126K37K37
S50MSK-157K50K50
S50MSK-197K62K62
S50MSK-248K75K75
1.26
1.57
1.97
2.48
.3750
.5000
.6250
.7500
1.61
2.20
2.80
3.54
.472
.670
.827
1.024
#6-32
#10-24
1/4-20
5/16-18
.5512
.7087
.7874
1.1811
Rated
Torque
Max.
Moment of
Inertia *
Static
Torsional
Stiffness
35.4
70.8
141.6
283.2
19000
15000
12000
10000
Coupling Series
(Ref. Only)
S50MSK-126K...
S50MSK-157K...
S50MSK-197K...
S50MSK-248K...
lbf in.
rpm
oz.
in.2
.53
1.75
5.47
17.49
lbf in. / deg

77.3
108.2
278.1
479.0
Max.
Lateral
Offset
.006
.008
.008
.008
Weight *
oz.
2.08
4.59
9.53
17.30
7
8
9
10
11
12
13
14
15
6-41
16
I
R
SLIT TYPE MSX FLEXIBLE COUPLINGS

SPLIT HUB TYPE
LOW MOMENT OF INERTIA
MAINTENANCE-FREE
ZERO BACKLASH
Inch
MATERIAL:
2
3
4
Aluminum Alloy ASTM 7075

SPECIFICATION:

.1250 & .1875 +.0000/-.0005
.2500 & .3750 +.0000/-.0006
.5000 +.0000/-.0007
L

CAP SCREW
E
O.D.
6
7
8
9
10
11
12
13
CAP SCREW
D
INCH COMPONENT
Catalog Number
O.D.
B
Bore
Cap
Screw
Max.
Bore
S50MSX-063H12H12
S50MSX-063H18H18
S50MSX-074H18H18
S50MSX-074H25H25
S50MSX-094H25H25
S50MSX-094H37H37
S50MSX-114H37H37
S50MSX-133H37H37
S50MSX-133H50H50
.630
.630
.748
.748
.945
.945
1.142
1.339
1.339
.1250
.1875
.1875
.2500
.2500
.3750
.3750
.3750
.5000
.118
.118
.134
.134
.167
.167
.201
.236
.236
.685
.685
.787
.787
.984
.984
1.181
1.378
1.378
.236
.236
.268
.268
.335
.335
.402
.472
.472
.197
.197
.236
.236
.315
.315
.354
.433
.433
#2-56
#2-56
#4-40
#4-40
#6-32
#6-32
#6-32
#6-32
#6-32
.2362
.2362
.3150
.3150
.3937
.3937
.4724
.6299
.6299
Coupling Series
(Ref. Only)
Rated
Torque
S50MSX-063H...
S50MSX-074H...
S50MSX-094H...
S50MSX-114H...
S50MSX-133H...
4.43
8.85
13.28
17.70
26.55
14
15
16
6-42
lbf in.
Max.
rpm
39000
33000
26000
21000
18000
Moment of
Inertia *
oz. in.2
.014
.032
.098
.257
.601
Static
Torsional
Stiffness
lbf in. / deg

30.90
41.71
122.04
216.27
339.85
Weight *
oz.
.25
.42
.81
1.45
2.19
SLIT TYPE MSX FLEXIBLE COUPLINGS

SET SCREW TYPE
LOW MOMENT OF INERTIA
MAINTENANCE-FREE
ZERO BACKLASH
R
Inch
MATERIAL:
Aluminum Alloy ASTM 7075
T
1

SPECIFICATION:
Bore Tolerance:
.2500 & .3750 +.0009/-.0000
.5000 & .6250 +.0011/-.0000

SET SCREW
S
B O.D.
5
6
INCH COMPONENT
Catalog Number
O.D.
B
Bore
Cap
Screw
Max.
Bore
S50MSX-063P25P25
S50MSX-074P25P25
S50MSX-074P37P37
S50MSX-094P25P25
S50MSX-094P37P37
S50MSX-114P37P37
S50MSX-114P50P50
S50MSX-133P50P50
S50MSX-133P62P62
.630
.748
.748
.945
.945
1.142
1.142
1.339
1.339
.2500
.2500
.3750
.2500
.3750
.3750
.5000
.5000
.6250
.118
.134
.134
.167
.167
.201
.201
.236
.236
.685
.787
.787
.984
.984
1.181
1.181
1.378
1.378
.236
.268
.268
.335
.335
.402
.402
.472
.472
#4-40
#4-40
#4-40
#6-32
#6-32
#6-32
#6-32
#10-24
#10-24
.3150
.3937
.3937
.4724
.4724
.5512
.5512
.7087
.7087
Coupling Series
(Ref. Only)
Rated
Torque
S50MSX-063P...
S50MSX-074P...
S50MSX-094P...
S50MSX-114P...
S50MSX-133P...
4.43
8.85
13.28
17.70
26.55
lbf in.
Max.
rpm
39000
33000
26000
21000
18000
Moment of
Inertia *
oz. in.2
.015
.034
.110
.280
.600
Static
Torsional
Stiffness
lbf in. / deg

30.90
41.71
122.04
216.27
339.85
Weight *
8
9
10
11
oz.
.25
.42
.81
1.45
2.19
12
13
14
15
6-43
16
I
R
SLIT TYPE PLASTIC COUPLINGS

SPLIT HUB TYPE
LOW COST
UV RESISTANT
VOLTAGE & RF ISOLATION
Inch
MATERIAL:
FEATURES:
3
4
5
Coupling - Engineered Polymer

Fasteners - Stainless Steel
Sizes:
13 & 19
-4F to +284F
Size: 25
This lightweight molded patented coupling can replace many

stainless steel/aluminum slit type couplings with low cost and
improved operation. There is no windup or backlash or any
derating for reversing applications. To insure a tight fit between
the shaft and the coupling, a metal screw-to-metal nut design
is used and does not utilize threads cut into the molded piece.
SPECIFICATIONS:
Coupling
Size
Max.
Parallel
Offset
Max.
Angular
Offset
13
19
25
.006
.008
.012
3
4
5
CAP SCREW
L
O.D.
D
B1
B2
7
INCH COMPONENT
8
9
10
11
12
13
14
15
16
Catalog Number
Size 13
S50TLC-50H12H12
S50TLC-50H12H18
S50TLC-50H12H25
S50TLC-50H18H18
S50TLC-50H18H25
S50TLC-50H25H25
Size 19
S50TLC-75H18H18
S50TLC-75H18H25
S50TLC-75H18H31
S50TLC-75H18H37
S50TLC-75H25H25
S50TLC-75H25H31
S50TLC-75H25H37
S50TLC-75H31H31
S50TLC-75H31H37
S50TLC-75H37H37
Size 25
S50TLC-98H31H31
S50TLC-98H31H37
S50TLC-98H31H50
S50TLC-98H37H37
S50TLC-98H37H50
S50TLC-98H50H50
6-44
O.D.
B1
Bore
B2
Bore
L
Length
D
Max.
Shaft
Depth
Cap
Screw
Max. Torsional
Torque Stiffness
+.0015
-.0000
+.0015
-.0000
.500
.500
.500
.500
.500
.500
.125
.125
.125
.187
.187
.250
.125
.187
.250
.187
.250
.250
.710
.710
.710
.710
.710
.710
.200
.200
.200
.200
.200
.200
M2
M2
M2
M2
M2
M2
.750
.750
.750
.750
.750
.750
.750
.750
.750
.750
.187
.187
.187
.187
.250
.250
.250
.312
.312
.375
.187
.250
.312
.375
.250
.312
.375
.312
.375
.375
1.100
1.100
1.100
1.100
1.100
1.100
1.100
1.100
1.100
1.100
.270
.270
.270
.270
.270
.270
.270
.270
.270
.270
M2.5
M2.5
M2.5
M2.5
M2.5
M2.5
M2.5
M2.5
M2.5
M2.5
17
17
17
17
17
17
17
17
17
17
1.85
1.85
1.85
1.85
1.85
1.85
1.85
1.85
1.85
1.85
.980
.980
.980
.980
.980
.980
.312
.312
.312
.375
.375
.500
.312
.375
.500
.375
.500
.500
1.400
1.400
1.400
1.400
1.400
1.400
.390
.390
.390
.390
.390
.390
M3
M3
M3
M3
M3
M3
33
33
33
33
33
33
2.78
2.78
2.78
2.78
2.78
2.78
lbf in.
lbf in. / deg
4.5
4.5
4.5
4.5
4.5
4.5
.85
.85
.85
.85
.85
.85
SLIT TYPE PLASTIC COUPLINGS

SET SCREW TYPE
LOW COST
UV RESISTANT
VOLTAGE & RF ISOLATION
R
Inch
MATERIAL:
Coupling - Engineered Polymer

Fasteners - Stainless Steel
FEATURES:
-4F to +284F
This lightweight molded patented coupling

can replace many stainless steel/aluminum slit type
couplings with low cost and improved operation.
There is no windup or backlash or any derating
for reversing applications. To insure a tight fit
between the shaft and the coupling, a metal
screw-to-metal nut design is used and does not
utilize threads cut into the molded piece.
SPECIFICATIONS:
Coupling
Size
Max.
Parallel
Offset
Max.
Angular
Offset
13
19
25
.006
.008
.012
3
4
5
D*
D*
B1
2 X SET
SCREWS
(SUPPLIED)
CAPTIVE
NUT
O.D.
**
B2
5
6
** On larger bores, the I.D. may partially

intrude into the captive nut cavity.
INCH COMPONENT
Catalog Number
Size 13
S50TLS-50P12P12
S50TLS-50P12P18
S50TLS-50P12P25
S50TLS-50P18P18
S50TLS-50P18P25
S50TLS-50P25P25
Size 19
S50TLS-75P18P18
S50TLS-75P18P25
S50TLS-75P18P31
S50TLS-75P18P37
S50TLS-75P25P25
S50TLS-75P25P31
S50TLS-75P25P37
S50TLS-75P31P31
S50TLS-75P31P37
S50TLS-75P37P37
Size 25
S50TLS-98P31P31
S50TLS-98P31P37
S50TLS-98P31P50
S50TLS-98P37P37
S50TLS-98P37P50
S50TLS-98P50P50
O.D.
B1
Bore
B2
Bore
Max. Torsional
Torque Stiffness
L
Length
D*
Set
Screw
.125
.187
.250
.187
.250
.250
.710
.710
.710
.710
.710
.710
.200
.200
.200
.200
.200
.200
M2
M2
M2
M2
M2
M2
.187
.187
.187
.187
.250
.250
.250
.312
.312
.375
.187
.250
.312
.375
.250
.312
.375
.312
.375
.375
1.100
1.100
1.100
1.100
1.100
1.100
1.100
1.100
1.100
1.100
.270
.270
.270
.270
.270
.270
.270
.270
.270
.270
M2.5
M2.5
M2.5
M2.5
M2.5
M2.5
M2.5
M2.5
M2.5
M2.5
17
17
17
17
17
17
17
17
17
17
1.85
1.85
1.85
1.85
1.85
1.85
1.85
1.85
1.85
1.85
.312
.312
.312
.375
.375
.500
.312
.375
.500
.375
.500
.500
1.400
1.400
1.400
1.400
1.400
1.400
.390
.390
.390
.390
.390
.390
M4
M4
M4
M4
M4
M4
33
33
33
33
33
33
2.78
2.78
2.78
2.78
2.78
2.78
+.0015
-.0000
+.0015
-.0000
.500
.500
.500
.500
.500
.500
.125
.125
.125
.187
.187
.250
.750
.750
.750
.750
.750
.750
.750
.750
.750
.750
.980
.980
.980
.980
.980
.980
lbf in.
lbf in. / deg
4.5
4.5
4.5
4.5
4.5
4.5
.85
.85
.85
.85
.85
.85
8
9
10
11
12
13
14
15
* D = max. shaft penetration depth.
6-45
16
DISK COUPLING GUIDE

Disk couplings are designed to operate under heavy loads while providing a certain degree of
freedom for misalignment. The following series provide exceptional performance in this regard.
Please use the selection chart to decide which series best fits your application.
Inch
Zero Backlash: All series of couplings listed below have zero backlash, ensuring no lost motion.
1
2
3
4
5
High Torque: A higher maximum allowable torque is desirable for heavier load applications.
Allowable Misalignment: A coupling with a higher degree of allowable misalignment will still allow power transmission
in applications where axial shaft alignment is less precise.
Special
Characteristics
SERIES
MTD
MDS
MDD
MHS
MHW
High Torque
Zero Backlash
Catalog
Page
E: Excellent
V
pg. 6-47
V
pg. 6-48
pg. 6-49
pg. 6-50
V: Very good
8
9
MTD
10
MDS
MDD
11
12
MHS
13
14
15
16
High Torsional Stiffness: A coupling with higher torsional stiffness receives less torsional displacement from the same
load, which creates less wind up and allows quicker startup time for the connected shaft.
Allowable Misalignment
6-46
MHW
pg. 6-51
DOUBLE DISK FLEXIBLE COUPLINGS

ZERO BACKLASH
LOW TORSIONAL STIFFNESS
EXCELLENT RESPONSE
LIGHTWEIGHT
R
Inch
MATERIAL:
Pins & Disks - Stainless Steel

Hubs & Spacer - Anodized Aluminum
SPECIFICATION:
Bore Tolerance: .2500 & .3750 +.0009/-.0000

.5000 +.0011/-.0000

sizes not exceeding the maximum listed
below are available on special order.
SET SCREW
2 AT EACH END
O.D.
.295
.295
Catalog Number
O.D.
B
Bore
L
Length
Set
Screw
Max.
Bore
S50MTD-078P25P25
S50MTD-078P37P37
S50MTD-098P25P25
S50MTD-098P37P37
S50MTD-126P37P37
S50MTD-126P50P50
.787
.787
.984
.984
1.260
1.260
.2500
.3750
.2500
.3750
.3750
.5000
1.075
1.075
1.079
1.079
1.083
1.083
#4-40
#4-40
#4-40
#4-40
#6-32
#6-32
.3150
.3150
.4724
.4724
.5512
.5512
S50MTD-078P...
S50MTD-098P...
S50MTD-126P...
4
5
6
INCH COMPONENT
Coupling Series
(Ref. Only)
Rated
Torque
lbf in.
4.43
8.85
17.70
Static
Max.
Max.
Max.
Max. Moment of Torsional Angular
*
Lateral Axial Weight
Inertia
*
rpm
Stiffness
oz.
Offset
Offset
Motion
oz. in.2
lbf in. / deg
31000
25000
19000
.066
.142
.366
18.54
32.44
35.53
1
1.5
2
.004
.006
.006
.016
.020
.024
.74
.95
1.52
7
8
9
10
11
12
13
14
15
6-47
16
I
R
SINGLE DISK FLEXIBLE COUPLINGS

SPLIT HUB TYPE
ZERO BACKLASH
MAINTENANCE-FREE
Inch
MATERIAL:

Hubs & Spacer - Aluminum Alloy
Max. Angular Offset: .7

Max. Lateral Offset: 0
SPECIFICATION:
3
4
Shaft Tolerance:
.1875 +.0000/-.0005
.2500 & .3750 +.0000/-.0006
.5000 & .6250 +.0000/-.0007
.7500 & 1.0000 +.0000/-.0008
L
S
O.D.
E
6
7
8
9
10
11
12
13
14
CAP
SCREW
Catalog Number
O.D.
B
Bore
Cap
Screw
Max.*
Bore
S50MDS-074H18H18
S50MDS-074H25H25
S50MDS-098H25H25
S50MDS-098H37H37
S50MDS-126H37H37
S50MDS-126H50H50
S50MDS-157H50H50
S50MDS-157H62H62
S50MDS-196H62H62
S50MDS-196H75H75
S50MDS-248H75H75
S50MDS-248H99H99
.748
.748
.984
.984
1.260
1.260
1.575
1.575
1.969
1.969
2.480
2.480
.1875
.2500
.2500
.3750
.3750
.5000
.5000
.6250
.6250
.7500
.7500
1.0000
.098
.098
.138
.138
.157
.157
.197
.197
.236
.236
.276
.276
.787
.787
.945
.945
1.142
1.142
1.299
1.299
1.654
1.654
1.811
1.811
.315
.315
.394
.394
.472
.472
.551
.551
.709
.709
.787
.787
.256
.256
.354
.354
.433
.433
.591
.591
.709
.709
.945
.945
#2-56
#2-56
#4-40
#4-40
#6-32
#6-32
#10-24
#10-24
#10-24
#10-24
1/4-20
1/4-20
.315
.315
.472
.472
.591
.591
.787
.787
.984
.984
1.181
1.181
* Other bore diameter combinations and bore sizes not exceeding the maximum listed above are available on special
order.
Coupling Series
(Ref. Only)
Torque
S50MDS-074H
S50MDS-098H
S50MDS-126H
S50MDS-157H
S50MDS-196H
S50MDS-248H
6.20
8.85
22.13
30.98
79.66
110.64
15
16
INCH COMPONENT
6-48
lbf in.
rpm
Moment of
Inertia
10000
8000
6000
5000
4000
3000
.034
.115
.394
.711
3.334
9.295
Max.
oz. in.2
Static
Torsional
Stiffness
lbf in./deg
43.26
97.33
247.20
401.70
478.95
648.90
Weight
oz.
.32
.67
1.45
2.40
4.94
8.82
DOUBLE DISK FLEXIBLE COUPLINGS

SPLIT HUB TYPE
ZERO BACKLASH
MAINTENANCE-FREE
HIGH TORQUE
R
Inch
MATERIAL:

Hubs & Spacer - Aluminum Alloy
Max. Angular Offset: 1.5
SPECIFICATION:
.1875 +.0000/-.0005
.2500 & .3750 +.0000/-.0006
.5000 & .6250 +.0000/-.0007
.7500 & 1.0000 +.0000/-.0008
3
L
S
CAP SCREW

E
B O.D.
B1
INCH COMPONENT
Catalog Number
O.D.
B
Bore
B1
Disk
Bore
Dia.
L
Length
Cap
Screw
Max.
Bore
S50MDD-074H18H18
S50MDD-074H25H25
S50MDD-098H25H25
S50MDD-098H37H37
S50MDD-126H37H37
S50MDD-126H50H50
S50MDD-157H50H50
S50MDD-157H62H62
S50MDD-196H62H62
S50MDD-196H75H75
S50MDD-248H75H75
S50MDD-248H99H99
.748
.748
.984
.984
1.260
1.260
1.575
1.575
1.969
1.969
2.480
2.480
.1875
.2500
.2500
.3750
.3750
.5000
.5000
.6250
.6250
.7500
.7500
1.0000
.335
.335
.492
.492
.630
.630
.827
.827
1.024
1.024
1.378
1.378
.098
.098
.138
.138
.157
.157
.197
.197
.236
.236
.276
.276
1.06
1.06
1.22
1.22
1.57
1.57
1.73
1.73
2.24
2.24
2.40
2.40
.315
.315
.394
.394
.472
.472
.551
.551
.709
.709
.787
.787
.256
.256
.354
.354
.433
.433
.591
.591
.709
.709
.945
.945
#2-56
#2-56
#4-40
#4-40
#6-32
#6-32
#10-24
#10-24
#10-24
#10-24
1/4-20
1/4-20
.3150
.3150
.4724
.4724
.5906
.5906
.7874
.7874
.9843
.9843
1.1811
1.1811
Coupling Series
(Ref. Only)
S50MDD-074H...
S50MDD-098H...
S50MDD-126H...
S50MDD-157H...
S50MDD-196H...
S50MDD-248H...
Rated
Torque
lbf in.
6.20
8.85
22.13
30.98
79.66
110.64
Max.
rpm
33000
25000
19000
15000
12000
10000
Moment of
Inertia
oz.
in.2
.048
.148
.525
1.039
4.428
11.481
Static
Torsional
Stiffness
lbf in. / deg

30.90
69.51
169.92
216.27
339.85
463.43
Max.
Lateral
Offset
Weight
.005
.005
.006
.006
.006
.006
.64
.88
2.12
3.53
7.41
12.00
oz.
Based on Max. Bore.
7
8
9
10
11
12
13
14
15
6-49
16
I
R
HEAVY-DUTY SINGLE DISK FLEXIBLE COUPLINGS

ZERO BACKLASH
HIGH TORQUE
HIGH RESPONSE
Inch
MATERIAL:


Max. Lateral Offset: 0
SPECIFICATION:
3
4

.3750 +.0000/-.0006
.5000 & .6250 +.0000/-.0007
.7500 & 1.0000 +.0000/-.0008
CAP SCREW
EACH END

C O.D.
5
6
D1
D1
INCH COMPONENT
7
8
9
10
11
12
Catalog Number
O.D.
B
Bore
L
Length
D1
C
Dia.
Cap
Screw
Max.
Bore
S50MHS-126H37H37
S50MHS-157H37H37
S50MHS-157H50H50
S50MHS-197H50H50
S50MHS-197H62H62
S50MHS-248H75H75
S50MHS-248H99H99
1.26
1.57
1.57
1.97
1.97
2.48
2.48
.3750
.3750
.5000
.5000
.6250
.7500
1.0000
1.26
1.50
1.50
1.73
1.73
1.97
1.97
.539
.650
.650
.764
.764
.878
.878
.354
.472
.472
.591
.591
.709
.709
.866
1.102
1.102
1.535
1.535
1.772
1.772
#4-40
#8-32
#8-32
#10-24
#10-24
#10-24
#10-24
.3937
.5512
.5512
.7874
.7874
1.0000
1.0000
Coupling Series
(Ref. Only)
S50MHS-126H...
S50MHS-157H...
S50MHS-197H...
S50MHS-248H...
13
14
15
16
6-50
Rated
Torque
lbf in.
17.70
35.40
66.30
88.50
Max.
rpm
19000
15000
12000
10000
Moment of
Inertia *
oz.
in.2
.246
.656
2.023
4.592
Static
Torsional
Stiffness
lbf in. / deg

200.8
432.5
571.6
772.4
Weight *
oz.
1.34
2.33
4.24
6.71
HEAVY-DUTY DOUBLE DISK FLEXIBLE COUPLINGS

ZERO BACKLASH
MEDIUM TORSIONAL STIFFNESS
HIGH TORQUE
HIGH RESPONSE
R
Inch
MATERIAL:

SPECIFICATION:

.3750 +.0000/-.0006
.5000 & .6250 +.0000/-.0007
.7500 & 1.0000 +.0000/-.0008
3
CAP SCREW
EACH END

L
D
B1
B C O.D.
D1
5
6
D1
INCH COMPONENT
Catalog Number
O.D.
B
Bore
B1
Disk
Bore
L
Length
D1
C
Dia.
Cap
Screw
Max.
Bore
S50MHW-126H37H37
S50MHW-157H37H37
S50MHW-157H50H50
S50MHW-197H50H50
S50MHW-197H62H62
S50MHW-248H75H75
S50MHW-248H99H99
1.26
1.57
1.57
1.97
1.97
2.48
2.48
.3750
.3750
.5000
.5000
.6250
.7500
1.0000
.591
.787
.787
.984
.984
1.260
1.260
1.57
1.81
1.81
2.05
2.05
2.28
2.28
.539
.650
.650
.764
.764
.878
.878
.354
.472
.472
.591
.591
.709
.709
.866
1.102
1.102
1.535
1.535
1.772
1.772
#4-40
#8-32
#8-32
#10-24
#10-24
#10-24
#10-24
.3937
.5512
.5512
.7874
.7874
1.0000
1.0000
Rated
Torque
Max.
17.70
35.40
66.30
88.50
19000
15000
12000
10000
Coupling Series
(Ref. Only)
S50MHW-126H...
S50MHW-157H...
S50MHW-197H...
S50MHW-248H...
lbf in.
rpm
Static
Moment of
Inertia * Torsional
Stiffness
oz. in.2
.339
.875
2.515
6.014
lbf in. / deg

154.48
231.71
308.95
386.19
Max.
Lateral
Offset
Max.
Axial
Motion
.006
.008
.008
.012
.016
.020
.024
.031
Weight *
7
8
9
10
oz.
1.69
2.86
5.30
8.12
11
12
13
14
15
6-51
16
MAGNETIC DISK COUPLINGS

CAUTION:
Be prepared for strong magnetic attraction

between the magnet hubs.
Inch
MATERIAL:
T
1
2

Set Screw - Stainless Steel
Magnet - NdFeB, Nickel Plated
Max. Parallel Offset: .25
SET
SCREW
CHAMFER BOTH ENDS
D
A
MAX. OPERATING TEMPERATURE:
.188
AIR GAP
+284F
TO MAKE COUPLING:
Priced Per Hub Half
Select two hub halves with the

same O.D. from the table below.
O.D.
B
HIGH ENERGY
MAGNETS
Fig. 1
Without Keyway
SET
SCREW
CHAMFER BOTH ENDS
D
A
.188
AIR GAP
C B
KEYWAY
DATA
O.D.
Fig. 2
With Keyway
HIGH ENERGY
MAGNETS
INCH COMPONENT
Catalog Number
Fig.
No.
O.D.
13
S50DCM-10
S50DCM-10H02
S50DCM-10H03
S50DCM-10H04
S50DCM-10H05
S50DCM-17
S50DCM-17H03
S50DCM-17H04
S50DCM-17H05
S50DCM-20
S50DCM-20H04
S50DCM-20H05
S50DCM-20H06
S50DCM-20H08
1
1
1
1
1
1
1
1
1
1
1
1
1
2
1.06
1.06
1.06
1.06
1.06
1.72
1.72
1.72
1.72
1.97
1.97
1.97
1.97
1.97
14
Coupling Series
(Ref. Only)
OAL
15
S50DCM-10...
S50DCM-17...
S50DCM-20...
1.37
1.37
1.37
11
12
16
6-52
OAL
Fig. 2 Keyway Dimensions

Bore
.500
W Width (+.002/-.000) .1250
T Height (+.010/-.000) .560
10
OAL
B
Bore
+.001
-.000
Solid
.125
.1875
.250
.3125
Solid
.1875
.250
.3125
Solid
.250
.3125
.375
.500
C
Hub
Dia.
D
Hub
Length
No.
Set
of
Screw Magnets
.63
.63
.63
.63
.63
.59
.59
.59
.59
.59
.59
.59
.59
.59
.81
.81
.81
.81
.81
.81
.81
.81
.81
1.12
1.12
1.12
1.12
1.12
.25
.25
.25
.25
.25
.25
.25
.25
.25
.25
.25
.25
.25
.25
.12
.12
.12
.12
.12
.12
.12
.12
.12
.12
.12
.12
.12
.12
#4-40
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#10-32
#10-32
#10-32
#10-32
6
6
6
6
6
6
6
6
6
8
8
8
8
8
Specifications for Two Hub Halves

Torque Breakaway Torque Max.
lbf in.
lbf in.
rpm
1
4
6
1.4
5
8
42500
26000
23000
hp @ 1750
rpm
Max.
Weight lb.
.03
.22
.08
.50
.17
.60
MAGNETIC DISK COUPLINGS

CAUTION:
Be prepared for strong magnetic attraction

between the magnet hubs.
R
Inch
MATERIAL:

Set Screw - Stainless Steel
Magnet - NdFeB, Nickel Plated
Max. Parallel Offset: .25
SET
SCREW
CHAMFER BOTH ENDS
D
A
.188
AIR GAP
+284F
TO MAKE COUPLING:
Select two hub halves with the

same O.D. from the table below.
O.D.
HIGH ENERGY
MAGNETS
Fig. 1
Without Keyway
Priced Per Hub Half

SET
SCREW
OAL
CHAMFER BOTH ENDS
D
A
.188
AIR GAP
W
T
C B
KEYWAY
DATA
O.D.
Fig. 2
With Keyway
Catalog Number
Fig.
No.
O.D.
S50DCM-24
S50DCM-24H06
S50DCM-24H08
S50DCM-24H10
S50DCM-24H12
S50DCM-29
S50DCM-29H08
S50DCM-29H10
S50DCM-29H12
S50DCM-29H14
S50DCM-29H16
1
1
2
2
2
1
2
2
2
2
2
2.36
2.36
2.36
2.36
2.36
2.86
2.86
2.86
2.86
2.86
2.86
B
Bore
+.001
-.000
Solid
.375
.500
.625
.750
Solid
.500
.625
.750
.875
1.000
HIGH ENERGY
MAGNETS
.625
.1875
.709
OAL
.750
.1875
.837
.875
.1875
.964
7
1.000
.2500
1.114
C
Hub
Dia.
D
Hub
Length
No.
Set
of
Screw Magnets
.75
.75
.75
.75
.75
1.00
1.00
1.00
1.00
1.00
1.00
1.50
1.50
1.50
1.50
1.50
2.00
2.00
2.00
2.00
2.00
2.00
.35
.35
.35
.35
.35
.53
.53
.53
.53
.53
.53
.16
.16
.16
.16
.16
.28
.28
.28
.28
.28
.28
#10-32
#10-32
#10-32
#10-32
#10-32
#10-32
#10-32
#10-32
1/4-20
10
10
10
10
10
14
14
14
14
14
14
Specifications for Two Hub Halves

OAL
S50DCM-24...
S50DCM-29...
1.69
2.19
5
6
Fig. 2 Keyway Dimensions

Bore
.500
W Width (+.002/-.000) .1250
T Height (+.010/-.000) .560
INCH COMPONENT
2
3
Coupling Series
(Ref. Only)
Torque Breakaway Torque Max.

lbf in.
lbf in.
rpm
9
15
12
20
19000
16000
hp @ 1750
rpm
Max.
Weight lb.
.25
.43
1.2
2.5
8
9
10
11
12
13
14
Continued from previous page
15
6-53
16
SPLINE TYPE FLEXIBLE COUPLINGS

MATERIAL:
Spline - Polyurethane
Hubs - 16, 20, 25 Series - Zinc Alloy Die Casting
32 Series - Sintered Metal
2
3
Inch

-4F to +140F
FEATURES:
High rpm.
Electrically isolated.
Dampens shock & vibration.
No lubrication.
BUILD YOUR OWN COUPLING:
4
5
For Different Bore Combinations: Select

hubs and corresponding spline within the same series.
For Hubs with the Same Bore: Select the
Complete Coupling
Other bore diameter combinations and

bore sizes not exceeding the maximum listed
T (2 at 90)
D
(TYP)
6
7
8
9
10
11
12
13
Coupling
Series
16
20
25
32
Rated
Torque
Max.
4.4
8.8
13.3
26.6
24000
19000
15000
12000
O.D.
rpm
lbf in.
K
(TYP)
K/2
(TYP)
INCH COMPONENT
Catalog Number
B
L
O.D. Bore
+.001 Length
Complete
Coupling
Hub
Only
Spline
Only
A 5Z28-1608
A 5D28-1608
A 5R28-16
5/8
A 5Z28-2008
A 5Z28-2012
A 5D28-2008
A 5D28-2012
A 5R28-20
A 5Z28-2508
A 5Z28-2512
A 5D28-2508
A 5D28-2512
A 5Z28-3212
A 5Z28-3216
A 5D28-3212
A 5D28-3216
14
15
16
6-54
-.000
E
T
Spline M Spline
Set Max.
Bore
Length
Screw Bore
1-1/16 15/32 5/16
7/16
1/8
15/64
#4-40
.315
25/32
25/32
.250 1-11/32 19/32 25/64

.375 1-11/32 19/32 25/64
35/64
35/64
5/32
5/32
5/16
5/16
#4-40
#4-40
.394
.394
A 5R28-25
1
1
.250 1-39/64 45/64 15/32

.375 1-39/64 45/64 15/32
21/32 13/64 25/64

21/32 13/64 25/64
#6-32
#6-32
.472
.472
A 5R28-32
1-1/4
1-1/4
.375 1-57/64 53/64 9/16

.500 1-57/64 53/64 9/16
25/32 15/64 15/32

25/32 15/64 15/32
#6-32
#6-32
.591
.591
.250
SPLINE TYPE FLEXIBLE COUPLINGS HEAVY-DUTY

MATERIAL:
Spline - Hytrel
Hubs - 20 & 25 Series - Zinc Alloy Die Casting
32 Series - Sintered Metal
R
Inch

FEATURES:
-22F to +212F
High rpm.
No lubrication.

hubs and corresponding sleeve within the same series.
Complete Coupling

4
L
T (2 at 90)
D
(TYP)
6
Coupling
Series
20
25
32
Rated
Torque
Max.
13.3
20.4
39.8
19000
15000
12000
O.D.
rpm
lbf in.
7
K
(TYP)
K/2
(TYP)
INCH COMPONENT
Catalog Number *
Complete
Coupling
Hub
Only
A 5Z29-2008
A 5Z29-2012
A 5D28-2008
A 5D28-2012
A 5Z29-2508
A 5Z29-2512
A 5Z29-3212
A 5Z29-3216
Spline
Only
B
L
O.D. Bore
+.001 Length
8
9
-.000
E
T
Spline M Spline Set Max.
Bore
Bore
Length
Screw
A 5R29-20
25/32
25/32
.250 1-11/32 19/32 25/64

.375 1-11/32 19/32 25/64
35/64
35/64
5/16
5/16
#4-40
#4-40
.394
.394
A 5D28-2508
A 5D28-2512
A 5R29-25
1
1
.250 1-39/64 45/64 15/32

.375 1-39/64 45/64 15/32
21/32 13/64 25/64

21/32 13/64 25/64
#6-32
#6-32
.472
.472
A 5D28-3212
A 5D28-3216
A 5R29-32
1-1/4
1-1/4
.375 1-57/64 53/64 9/16

.500 1-57/64 53/64 9/16
25/32 15/64 15/32

25/32 15/64 15/32
#6-32
#6-32
.591
.591
5/32
5/32
10
11
12
13
14
15
6-55
16
GEARGRIP FLEXIBLE COUPLINGS

MATERIAL:
R
T
Sleeve - Neoprene with Ground O.D.

Hubs - Zinc Alloy Die Casting
Inch
1
2
+250F Max.
FEATURES:
No lubrication.

hubs and corresponding sleeve within the same series.
For Hubs with the Same Bore: Select the Complete Coupling
.125 MIN.
SET
SCREW
B O.D.
6
7
K
L
lbf in.
hp @
1750 rpm
Max.
Lateral
Offset
Max.
Speed
4
16
30
60
.11
.44
.83
1.7
.016
.040
.040
.040
25000
16800
11500
15500
Nominal
Torque
Coupling
Series
11
18
21
31
rpm
INCH COMPONENT
10
11
12
13
14
15
16
Catalog Number
Complete
Coupling
Hub
Only
Sleeve
Only
O.D.
.030
B
Bore
+.002
-.001
.030
C
Hub
Dia.
.125
.188
.250
.3125
.375
1
1
1
1
1
.70
.70
.70
.70
.70
7/32
7/32
7/32
7/32
7/32
Set
Screw
.56
.56
.56
.56
.56
1/8
1/8
1/8
1/8
1/8
#8-32
#8-32
#8-32
#8-32
#8-32
1/16
A
A
A
A
A
5Z
5Z
5Z
5Z
5Z
1-1104
1-1106
1-1108
1-1110
1-1112
A
A
A
A
A
5D
5D
5D
5D
5D
1-1104
1-1106
1-1108
1-1110
1-1112
A 5R 1-11
.80
.80
.80
.80
.80
A
A
A
A
5Z
5Z
5Z
5Z
1-1810
1-1812
1-1814
1-1816
A
A
A
A
5D
5D
5D
5D
1-1810
1-1812
1-1814
1-1816
A 5R 1-18
1.20
1.20
1.20
1.20
.3125
.375
.438
.500
1-1/2
1-1/2
1-1/2
1-1/2
1.15
1.15
1.15
1.15
5/16
5/16
5/16
5/16
.85
.85
.85
.85
5/32
5/32
5/32
5/32
1/4-20
1/4-20
1/4-20
1/4-20
A
A
A
A
5Z
5Z
5Z
5Z
1-2110
1-2112
1-2114
1-2116
A
A
A
A
5D
5D
5D
5D
1-2110
1-2112
1-2114
1-2116
A 5R 1-21
1.20
1.20
1.20
1.20
.3125
.375
.438
.500
2-1/4
2-1/4
2-1/4
2-1/4
1.15
1.15
1.15
1.15
5/16
5/16
5/16
5/16
1-19/32
1-19/32
1-19/32
1-19/32
5/32
5/32
5/32
5/32
1/4-20
1/4-20
1/4-20
1/4-20
A 5D 1-3112
A 5D 1-3114
A 5R 1-31
1.40
1.40
.375
.438
2-3/8
2-3/8
1.45
1.45
3/8
3/8
1-19/32
1-19/32
3/16
3/16
1/4-20
1/4-20
A 5Z 1-3112
A 5Z 1-3114
6-56
JAW TYPE FLEXIBLE COUPLINGS

RUBBER SPIDER
OIL RESISTANT
MATERIAL:
Inch
Body - Sintered Iron

Spider - NBR Rubber - 80A 5 Durometer
60A Durometer

SPIDER
B
-40F to +212F
O.D.
For Different Bore Combinations: Select bodies and

corresponding spider within the same series.
For Bodies with the Same Bore: Select the Complete Coupling
D
L
BODY
SET
SCREW
Catalog Number
Body Only
A
A
A
A
A
5Z
5Z
5Z
5Z
5Z
3-03504
3-03506
3-03508
3-03510
3-03512
A
A
A
A
A
5D
5D
5D
5D
5D
3-03504
3-03506
3-03508
3-03510
3-03512
A
A
A
A
A
5Z
5Z
5Z
5Z
5Z
3-05008
3-05010
3-05012
3-05014
3-05016
A
A
A
A
A
5D
5D
5D
5D
5D
3-05008
3-05010
3-05012
3-05014
3-05016
A 5Z 3-07012
A 5Z 3-07014
A 5Z 3-07016
A 5D 3-07012
A 5D 3-07014
A 5D 3-07016
A
A
A
A
A
5Z
5Z
5Z
5Z
5Z
3-07508
3-07510
3-07512
3-07514
3-07516
A
A
A
A
A
5D
5D
5D
5D
5D
3-07508
3-07510
3-07512
3-07514
3-07516
A
A
A
A
A
5Z
5Z
5Z
5Z
5Z
3-09008
3-09010
3-09012
3-09014
3-09016
A
A
A
A
A
5D
5D
5D
5D
5D
3-09008
3-09010
3-09012
3-09014
3-09016
1
2
3
4
INCH COMPONENT
Complete
Coupling
Approximate
Weight @ Max. Bore
Wind-Up
@ Max. Torque
A 5R 3-035 *
1/8
3/16
1/4
5/16
3/8
.1
.1
.1
.1
.1
5.0
5.0
5.0
5.0
5.0
A 5R 3-050 *
1/4
5/16
3/8
7/16
1/2
.2
.2
.2
.2
.2
4.5
4.5
4.5
4.5
4.5
A 5R 3-070 *
3/8
7/16
1/2
.4
.4
.4
3.5
3.5
3.5
A 5R 3-075
1/4
5/16
3/8
7/16
1/2
.8
.8
.8
.8
.8
4.7
4.7
4.7
4.7
4.7
A 5R 3-090
1/4
5/16
3/8
7/16
1/2
1.2
1.2
1.2
1.2
1.2
3.2
3.2
3.2
3.2
3.2
Spider Only
B
Bore
lb.
deg.
5
6
7
8
9
10
11
12
* These Spiders have four legs only.
Coupling Series
(Ref. Only)
A
A
A
A
A
5Z
5Z
5Z
5Z
5Z
3-035..
3-050..
3-070..
3-075..
3-090..
O.D.
5/8
1-5/64
1-23/64
1-3/4
2-7/64
C
D
L
Distance Length
Overall Between Through
Length Flanges Bore
13/16
1-23/32
2
2-1/8
2-1/8
9/32
15/32
1/2
1/2
1/2
17/64
5/8
3/4
13/16
13/16
Set
Screw
Rated
Torque
hp
@ 1800
13
#6-32
1/4-20
1/4-20
1/4-20
1/4-20
.13
.31
.38
.31
.44
3.5
26.3
43.2
90.0
144.0
.10
.75
1.20
2.50
4.00
14
lbf in.
rpm
NOTE: If couplings are run at 3600 rpm, hp values shown in table can be doubled.
6-57
15
16
JAW TYPE FLEXIBLE COUPLINGS

MOLDED ACETAL SPIDER
R
T
MATERIAL:
Body - Molded Fiberglass

Spider - Molded Acetal
Insert - Aluminum
Inch

2
3
4
SPIDER
BORE
G
L
1/4
31/64
5
S
ALUMINUM MAX.
BORE
INSERT
O.D.
SET SCREW
8
9
10
INCH COMPONENT
11
Catalog Number *
12
13
With Insert
A 5T 2-0808
A 5T 2-1010
Without Insert
A 5M 2-0608
A 5M 2-0808
A 5M 2-0810
+.0015
15
6-58
1
.2500 1-3/8 3/32 13/32 15/64 25/32 41/64 3/4 3/16
1-5/16 .3125 1-1/2 1/8 17/32 19/64 1-1/16 11/16 1-1/16 1/4
3/4
1
1
.2500 1-9/32 1/16 5/16 3/16 9/16 39/64 39/64 1/8

.2500 1-3/8 3/32 13/32 15/64 25/32 41/64 41/64 3/16
.3125 1-3/8 3/32 13/32 15/64 25/32 41/64 41/64 3/16
14
16
Bore
O.D. +.0005
hp
@ Max.
Set
Screw 1800 Torque
lbf in.
rpm
1/4-20
1/4-20
1/2
3/4
17.5
26.2
#10-24
1/4-20
1/4-20
1/8
1/4
1/4
4.4
8.7
8.7
CROWNED TOOTH GEAR TYPE FLEXIBLE COUPLINGS

MATERIAL:
Sleeve - Molded Nylon

Hub - Steel
R
Inch
Max. Angular Offset: 1/Hub

Max. Lateral Offset: .016/Hub
Recommended Shaft Gap: .160
T
1
+180F
FEATURES:
Free axial movement.

Low friction and minimum
stress during misalignment.
High torque and low inertia.
Lubrication-free.
Blind assembly.
For Different Bore Combinations: Select hubs and corresponding

sleeve within the same series.
Other bores and bores with keyways are available on special order.
5
C B
TYP
O.D.
SET
SCREW
Coupling
Series
Nominal
Torque
Maximum
Torque
M14
M19
M24
M28
86
138
173
390
173
277
347
781
lbf in.
lbf in.
2.5
3.7
4.5
10.5
Nominal
Nominal
hp
hp
@ 1750 rpm @ 1140 rpm
1.5
2.5
3.2
7.0
rpm
Coupling
Weight
14000
11800
10600
8500
.4
.6
.8
1.8
Maximum
lb.
10
INCH COMPONENT
Catalog Number
Complete
Coupling
Hub Only
S9932Y-M14250250
S9932Y-M14375375
S9932Y-M14438438
S9932Y-M14500500
S9932Y-M14625625
S2910Y-M14250
S2910Y-M14375
S2910Y-M14438
S2910Y-M14500
S2910Y-M14625
S9932Y-M19438438
S9932Y-M19500500
S9932Y-M19625625
S9932Y-M19750750
O.D.
B
Bore
L
Length
C
Hub
Dia.
E
Set
Sleeve Screw
Length
1.80
1.80
1.80
1.80
1.80
1.00
1.00
1.00
1.00
1.00
1.45
1.45
1.45
1.45
1.45
#10-24
#10-24
#10-24
#10-24
#10-24
S5930Y-M14
1.57
1.57
1.57
1.57
1.57
+.003
-.000
.250
.375
.4375
.500
.625
S2910Y-M19438
S2910Y-M19500
S2910Y-M19625
S2910Y-M19750
S5930Y-M19
1.90
1.90
1.90
1.90
.4375
.500
.625
.750
1.96
1.96
1.96
1.96
1.25
1.25
1.25
1.25
1.45
1.45
1.45
1.45
1/4-20
1/4-20
1/4-20
1/4-20
S9932Y-M24500500
S2910Y-M24500
S5930Y-M24
2.05
.500
2.07
1.40
1.60
1/4-20
S9932Y-M28438438
S9932Y-M28500500
S2910Y-M28438
S2910Y-M28500
S5930Y-M28
2.60
2.60
.4375
.500
3.30
3.30
1.73
1.73
1.80
1.80
1/4-20
1/4-20
Sleeve Only
6-59
11
12
13
14
15
16
I
R
T
1
CONTROL-FLEX COUPLINGS STANDARD

CONSTANT-VELOCITY
REDUCES ROTATIONAL VIBRATION
Inch
MATERIAL:
Hubs - Aluminum
Control-Flex Member - Acetal
Pins - Hardened Alloy Steel
Socket Head Screws - Alloy Steel
-10F to +150F
3
4
5
6
7
Special bores up to the maximum sizes listed available on special order.
13
14
B
Bore
+.001
-.000
Max.
Bore
.010
3/8
3/8
3/8
1/2
1/2
1/2
3/4
3/4
3/4
.748
.748
.748
.984
.984
.984
1.457
1.457
1.457
L
Length
O.D.
.010
W
Hub
Width
Screw
Size
.219
.219
.219
.374
.374
.374
.394
.394
.394
#4-40
#4-40
#4-40
#6-32
#6-32
#6-32
#8-32
#8-32
#8-32
.005
S59DZ9-CF120210
S59DZ9-CF120310
S59DZ9-CF120410
S59DZ9-CF160316
S59DZ9-CF160416
S59DZ9-CF160616
S59DZ9-CF240418
S59DZ9-CF240618
S59DZ9-CF240818
.125
.1875
.250
.1875
.250
.375
.250
.375
.500
Catalog Number
(Ref. Only)
Max.
Cont.
Torque
Peak Torque
ozf in.
lbf in.
per degree
Lateral
in.
Axial
in.
S59DZ9-CF12...
S59DZ9-CF16...
S59DZ9-CF24...
64
144
496
96
208
720
2.3
5
16.3
.013
.019
.028
.010
.014
.021
15
16
Rated torques are with all alignment factors zero.

The summation of the three alignment factors
should not exceed 50%.
The rated torque must be reduced by the
summation of the alignment factors.
Catalog Number
12
SPECIFICATIONS:
INCH COMPONENT
11
SCREWS
SUPPLIED
Lightweight, low inertia.

No maintenance, no lubrication.
No change in angular velocity
or torque due to misalignment.
No end thrust due to torque transmission.
Zero Backlash.
Electrical Isolation.
10
O.D.
FEATURES:
6-60
ozf in.
.620
.620
.620
1.000
1.000
1.000
1.170
1.170
1.170
Torsional
Stiffness
Max. Shaft Misalignments
CONTROL-FLEX COUPLINGS HEAVY-DUTY

CONSTANT-VELOCITY
REDUCES ROTATIONAL VIBRATION
R
Inch
MATERIAL:
Hubs - Aluminum
Control-Flex Member - Acetal
Pins - Hardened Alloy Steel
Socket Head Screws - Alloy Steel
T
1
-10F to +150F
O.D.
FEATURES:
SCREWS
SUPPLIED
Lightweight, low inertia.

No maintenance, no lubrication.
No change in angular velocity
or torque due to misalignment.
No end thrust due to torque transmission.
Zero Backlash.
Electrical Isolation.
4
B
SPECIFICATIONS:
Rated torques are with all alignment factors zero.

The summation of the three alignment factors
should not exceed 50%.
The rated torque must be reduced by the
summation of the alignment factors.
6
7
Special bores up to the maximum sizes listed available on special order.
INCH COMPONENT
Catalog Number
B
Bore
+.001
-.000
Max.
Bore
.010
3/8
3/8
3/8
1/2
1/2
1/2
3/4
3/4
3/4
.748
.748
.748
.984
.984
.984
1.457
1.457
1.457
L
Length
O.D.
.010
W
Hub
Width
Screw
Size
.219
.219
.219
.374
.374
.374
.394
.394
.394
#4-40
#4-40
#4-40
#6-32
#6-32
#6-32
#8-32
#8-32
#8-32
.005
S59DZ9-HCF120212
S59DZ9-HCF120312
S59DZ9-HCF120412
S59DZ9-HCF160319
S59DZ9-HCF160419
S59DZ9-HCF160619
S59DZ9-HCF240423
S59DZ9-HCF240623
S59DZ9-HCF240823
.125
.1875
.250
.1875
.250
.375
.250
.375
.500
Catalog Number
(Ref. Only)
Max.
Cont.
Torque
Peak Torque
ozf in.
lbf in.
per degree
Lateral
in.
Axial
in.
S59DZ9-CF12...
S59DZ9-CF16...
S59DZ9-CF24...
112
272
912
160
384
1296
4.6
9.9
31.3
.009
.012
.019
.007
.009
.014
ozf in.
.78
.78
.78
1.20
1.20
1.20
1.48
1.48
1.48
Torsional
Stiffness
Max. Shaft Misalignments
9
10
11
12
13
14
15
6-61
16
I
R
NEO-FLEX COUPLINGS MINIATURE

SET SCREW TYPE HUBS
MOLDED NEOPRENE CENTER
SHAFT-TO-SHAFT INSULATION
TORSIONAL VIBRATION ISOLATION
Inch
MATERIAL:

Center - Molded Neoprene

SPECIFICATIONS:
3
4
5
Max. Torque: 100 ozf in.

Max. torque should exceed the
application torque multiplied by the
service factor for a given type of loading.
Service Factors
Load
Factor
Uniform
1.5
Non-uniform
2
Shock
3
Reversing Shock 4
6
NEW
.930 1/32
INCH COMPONENT
Catalog Number
B1
Bore
S50PMR-0404
S50PMR-0406
S50PMR-0408
S50PMR-0606
S50PMR-0608
S50PMR-0808
.1250
.1250
.1250
.1875
.1875
.2500
10
11
12
13
14
15
16
STAINLESS STEEL
SOCKET HEAD
SET SCREWS
SUPPLIED
9/32
(TYP)
6-62
+.002
-.000
.650
B2
B1
Set
Screw
#0-80
#0-80
#0-80
#2-56
#2-56
#4-40
B2
Bore
+.002
-.000
.1250
.1875
.2500
.1875
.2500
.2500
.525
Set
Screw
#0-80
#2-56
#4-40
#2-56
#4-40
#4-40
FAIRLOC NEO-FLEX COUPLINGS SHORT

FAIRLOC TYPE HUBS
R
Inch
MATERIAL:

Center - Molded Neoprene, Durometer 73
Ribbed Style - Max. Angular Offset: 1
Smooth Style - Max. Angular Offset: 1
SPECIFICATION:
Bore Size
.1200
.1250
.1875
.2500
Max. Torque
L2
L1
ozf in.
100
120
150
180
D1 A1
A2 D2 11/16 13/16
L2
L1
Other bore sizes and combinations

D1 A1
6
A2 D2 11/16 13/16
Smooth Style
A2
Bore
+.001
-.000
D1
Hub
Dia.
D2
Hub
Dia.
.1200
.1250
.1250
.1875
.2500
.1875
.2500
.2500
.440
.440
.440
.440
.440
.495
.495
.610
.440
.440
.440
.495
.610
.495
.610
.610
Ribbed Style
Smooth Style
+.001
-.000
S50FSR-0303
S50FSR-0304
S50FSR-0404
S50FSR-0406
S50FSR-0408
S50FSR-0606
S50FSR-0608
S50FSR-0808
S50FSS-0303
S50FSS-0304
S50FSS-0404
S50FSS-0406
S50FSS-0408
S50FSS-0606
S50FSS-0608
S50FSS-0808
.1200
.1200
.1250
.1250
.1250
.1875
.1875
.2500
L
L1
L2
Hub
Hub Overall
Length Length Length
1/64
.257
.257
.257
.257
.257
.257
.257
.295
7
8
INCH COMPONENT
A1
Bore
4
5
Ribbed Style

Suggested clearance fit between the bore
and shaft is .0001/.0008.
Catalog Number
.257
.257
.257
.257
.295
.257
.295
.295
1.264
1.264
1.264
1.264
1.302
1.264
1.302
1.330
Cap
Screw
#2-56
#2-56
#2-56
#2-56
#2-56 / #4-40
#2-56
#2-56 / #4-40
#4-40
9
10
11
12
13
14
15
6-63
16
I
R
NEO-FLEX COUPLINGS SHORT

SET SCREW TYPE HUBS
MATERIAL:
3
4
5
Inch


1-1/4
SPECIFICATION:
Bore Size
.1200
.1248
.1873
.2498
SET SCREW
Max. Torque
ozf in.
100
120
150
180
1/4
D1 A1
SPOT DRILL
A2 D2 11/16 13/16
Ribbed Style

1-1/4
SET SCREW
1/4
D1 A1
SPOT DRILL
A2 D2 11/16 13/16
7
Smooth Style
INCH COMPONENT
Catalog Number
9
10
11
Ribbed Style
Smooth Style
+.0005
-.0000
S50PSR-0303
S50PSR-0304
S50PSR-0404
S50PSR-0406
S50PSR-0408
S50PSR-0606
S50PSR-0608
S50PSR-0808
S50PSS-0303
S50PSS-0304
S50PSS-0404
S50PSS-0406
S50PSS-0408
S50PSS-0606
S50PSS-0608
S50PSS-0808
.1200
.1200
.1248
.1248
.1248
.1873
.1873
.2498
12
13
14
15
16
A1
Bore
6-64
A2
Bore
+.0005
-.0000
D1
Hub
Dia.
D2
Hub
Dia.
Set
Screw
.1200
.1248
.1248
.1873
.2498
.1873
.2498
.2498
5/16
5/16
5/16
5/16
5/16
3/8
3/8
1/2
5/16
5/16
5/16
3/8
1/2
3/8
1/2
1/2
#2-56
#2-56
#2-56
#2-56 / #4-40
#2-56 / #6-32
#4-40
#4-40 / #6-32
#6-32
FAIRLOC NEO-FLEX COUPLINGS LONG

FAIRLOC TYPE HUBS
R
Inch
MATERIAL:

SPECIFICATION:
Bore Size
.1200
.1250
.1875
.2500
Max. Torque
ozf in.
100
120
150
180
L1
L2
11/16
A2 D2
13/16
D1 A1
Ribbed Style

Suggested clearance fit between the bore
and shaft is .0001/.0008.
L1
L2
6
11/16
A2 D2
13/16
D1 A1
Smooth Style
INCH COMPONENT
Catalog Number
A1
Bore
A2
Bore
+.001
-.000
D1
Hub
Dia.
D2
Hub
Dia.
.1200
.1250
.1250
.1875
.2500
.1875
.2500
.2500
.440
.440
.440
.440
.440
.495
.495
.610
.440
.440
.440
.495
.610
.495
.610
.610
Ribbed Style
Smooth Style
+.001
-.000
S50FLR-0303
S50FLR-0304
S50FLR-0404
S50FLR-0406
S50FLR-0408
S50FLR-0606
S50FLR-0608
S50FLR-0808
S50FLS-0303
S50FLS-0304
S50FLS-0404
S50FLS-0406
S50FLS-0408
S50FLS-0606
S50FLS-0608
S50FLS-0808
.1200
.1200
.1250
.1250
.1250
.1875
.1875
.2500
L
L2
L1
Hub Overall
Hub
Length
Length Length 1/64
.257
.257
.257
.257
.257
.257
.257
.295
.257
.257
.257
.257
.295
.257
.295
.295
2.574
2.574
2.574
2.574
2.612
2.574
2.612
2.650
8
Cap
Screw
#2-56
#2-56
#2-56
#2-56
#2-56 / #4-40
#2-56
#2-56 / #4-40
#4-40
9
10
11
12
13
14
15
6-65
16
I
R
NEO-FLEX COUPLINGS LONG

SET SCREW TYPE HUBS
MATERIAL:
3
4
5
Inch


SPECIFICATION:
Bore Size
.1200
.1248
.1873
.2498
2-9/16
Max. Torque
ozf in.
100
120
150
180
SET
SCREW
1/4
Ribbed Style
2-9/16
SET
SCREW
1/4
1/4
SPOT DRILL
11/16
A2 D2
13/16
D1 A1
SPOT DRILL
11/16
A2 D2
13/16
D1 A1

1/4
Smooth Style
INCH COMPONENT
Catalog Number
9
10
11
Ribbed Style
Smooth Style
+.0005
-.0000
S50PLR-0303
S50PLR-0304
S50PLR-0404
S50PLR-0406
S50PLR-0408
S50PLR-0606
S50PLR-0608
S50PLR-0808
S50PLS-0303
S50PLS-0304
S50PLS-0404
S50PLS-0406
S50PLS-0408
S50PLS-0606
S50PLS-0608
S50PLS-0808
.1200
.1200
.1248
.1248
.1248
.1873
.1873
.2498
12
13
14
15
16
A1
Bore
6-66
A2
Bore
+.0005
-.0000
D1
Hub
Dia.
D2
Hub
Dia.
Set
Screw
.1200
.1248
.1248
.1873
.2498
.1873
.2498
.2498
5/16
5/16
5/16
5/16
5/16
3/8
3/8
1/2
5/16
5/16
5/16
3/8
1/2
3/8
1/2
1/2
#2-56
#2-56
#2-56
#2-56 / #4-40
#2-56 / #6-32
#4-40
#4-40 / #6-32
#6-32
PRECISION OLDHAM COUPLINGS

CLAMP TYPE
PIN TYPE
PAT. NO. 3,404,545
R
Inch
MATERIAL:
303 Stainless Steel
Max. Angular Offset: 1-1/2
Max. Lateral Offset: .015 in.
Fig. 1 Clamp Type
SPECIFICATIONS:
Max. Backlash: 5 min.

Max. Operating Speed: 3000 rpm
Max. Torque: Standard Series: 600 ozf in.

Miniature Series: 400 ozf in.
Center block spring-loaded.
Stainless Steel socket head set screws
supplied with Pin Type.
2
3
Fig. 2 Pin Type
4
25/64
39/64
5
B2 A2
A1 B1 1.000
A1 B1 .750
B2 A2
6
1-11/64
15/16
Fig. 1 Clamp Type

Standard Series
Fig. 1 Clamp Type

Miniature Series
7
8
#56 SUB DRILL

39/64
A1 B1 1.000
B2 A2
9
10
1-11/64
#4-40 SET SCREW
11
Fig. 2 Pin Type

Standard Series
INCH COMPONENT
Catalog Number *
Standard
Fig. 1 Clamp Type
S9911A-G400-4
Fig. 2 Pin Type
S9911A-G401-5
A1
Bore
B1
Dia.
A2
Bore
B2
Dia.
Miniature
+.0005
-.0000
+.000
-.003
+.0005
-.0000
+.000
-.003
S9911A-G407-03
S9911A-G407-04
.1873
.2498
.250
.313
.1873
.2498
.250
.313
.3123
9/16
.3123
9/16
12
13
14
15
6-67
16
OLDHAM COUPLINGS
SPLIT TYPE HUB
R
T
MATERIAL:
Hubs - Aluminum, Clear Anodized

Torque Disc - Acetal
Inch
-40F to +185F
2
3
4
5
FEATURES:
Easy assembly.
Lubrication-free.
Low inertia.
Electrical isolation.
MAX. SERVICE TORQUE:

6.6 lbf in. for 15 series
6
7

disc within the same series.
L
Set Screw & Split Hubs can be interchanged

if discs from the same size O.D. are selected.
O.D.
S
(TYP)
8
9
10
INCH COMPONENT
Catalog Number
11
Complete
Coupling
Bore
O.D.
+0.030
0
Max.
Max.
L
Cap Lateral
Shaft Screw
Length Depth
Offset
Hub Only
Disc Only
A 5Z15-331504
A 5Z15-331506
A 5Z15-331508
A 5A15-331504
A 5A15-331506
A 5A15-331508
A 5P15-3315
.59
.59
.59
.125
.1875
.250
1.02
1.02
1.02
.32
.32
.32
#3-48
#3-48
#3-48
.004
.004
.004
3/32
3/32
3/32
A 5Z15-331904
A 5Z15-331906
A 5Z15-331908
A 5A15-331904
A 5A15-331906
A 5A15-331908
A 5P15-3319
.75
.75
.75
.125
.1875
.250
.87
.87
.87
.25
.25
.25
#3-48
#3-48
#3-48
.008
.008
.008
3/32
3/32
3/32
14
A 5Z15-332508
A 5Z15-332510
A 5Z15-332512
A 5A15-332508
A 5A15-332510
A 5A15-332512
A 5P15-3325
1.00
1.00
1.00
.250
.3125
.375
1.12
1.12
1.12
.34
.34
.34
#6-32
#6-32
#6-32
.008
.008
.008
1/8
1/8
1/8
15
A 5Z15-333310
A 5Z15-333312
A 5Z15-333316
A 5A15-333310
A 5A15-333312
A 5A15-333316
A 5P15-3333
1.31
1.31
1.31
.3125
.375
.500
1.89
1.89
1.89
.51
.51
.51
#6-32
#6-32
#6-32
.008
.008
.008
1/8
1/8
1/8
12
13
16
6-68
OLDHAM COUPLINGS
SET SCREW HUB
MATERIAL:
Hubs - 06, 09 & 13 Series - Brass, Chromate Finish

15 Thru 41 Series - Aluminum, Clear Anodized
Torque Disc - Acetal
Inch
-40F to +185F
FEATURES:
Easy assembly.
Lubrication-free.
Low inertia.
Electrical isolation.
O.D.
S
(TYP)
MAX. SERVICE TORQUE:

.5 lbf in. for 06 series
4
5
6

disc within the same series.
Set Screw & Split Hubs can be interchanged
if discs from the same size O.D. are selected.
INCH COMPONENT
Catalog Number
Complete
Coupling
Hub Only
Disc Only
A 5Z15-000604
A 5B15-000604
A 5P15-0006
O.D.
.25
Bore
+.0012
-.0000
.125
Max.
Max.
L
Set * Lateral
Shaft Screw
Length Depth
Offset
.50
.15
*
#4-40
.004
5/64
#4-40
#4-40
.004
.004
5/64
5/64
7
8
9
A 5Z15-000904
A 5Z15-000906
A 5B15-000904
A 5B15-000906
A 5P15-0009
.37
.37
.125
.1875
.50
.50
.15
.15
A 5Z15-001306
A 5Z15-001308
A 5B15-001306
A 5B15-001308
A 5P15-0013
.50
.50
.1875
.250
.63
.63
.17
.17
#4-40
#6-32
.004
.004
3/32
3/32
A 5Z15-001506
A 5Z15-001508
A 5A15-001506
A 5A15-001508
A 5P15-0015
.59
.59
.1875
.250
1.02
1.02
.32
.32
#6-32
#6-32
.004
.004
3/32
3/32
11
A 5Z15-001906
A 5Z15-001908
A 5Z15-001910
A 5A15-001906
A 5A15-001908
A 5A15-001910
A 5P15-0019
.75
.75
.75
.1875
.250
.3125
.87
.87
.87
.25
.25
.25
#6-32
#6-32
#6-32
.008
.008
.008
3/32
3/32
3/32
12
A 5Z15-002508
A 5Z15-002510
A 5Z15-002512
A 5A15-002508
A 5A15-002510
A 5A15-002512
A 5P15-0025
1.00
1.00
1.00
.250
.3125
.375
1.12
1.12
1.12
.34
.34
.34
#8-32
#8-32
#8-32
.008
.008
.008
1/8
1/8
1/8
13
A 5Z15-003310
A 5Z15-003312
A 5Z15-003316
A 5A15-003310
A 5A15-003312
A 5A15-003316
A 5P15-0033
1.31
1.31
1.31
.3125
.375
.500
1.89
1.89
1.89
.51
.51
.51
#8-32
#8-32
#8-32
.008
.008
.008
1/8
1/8
1/8
14
A 5Z15-004116
A 5Z15-004120
A 5A15-004116
A 5A15-004120
A 5P15-0041
1.62
1.62
.500
.625
2.00
2.00
.66
.66
#10-24
#10-24
.010
.010
11/64
11/64
15
10
* 06 & 09 series have only one set screw at each end.
6-69
16
I
R
SPIDER TYPE FLEXIBLE COUPLINGS

SPLIT HUB
PRELOADED RUBBER SPIDER
MATERIAL:
Inch
Hubs - Aluminum
Spider - NBR Rubber - 86, 92 or 98 Durometer
1
2
3
FEATURES:
Precision-machined hub with integral fasteners

& prestressed spiders which eliminate backlash.
Allows limited axial motion.
INCH COMPONENT
CATALOG NUMBER
A 5Z27-
4
5
CAP SCREWS
SUPPLIED
HUB
Coupling Size Code

Durometer Code
B O.D.
EXAMPLE: A 5Z27-201092 is a complete 25/32 O.D.

coupling with a .3125 bore & a 92 durometer spider.
S
SPIDER
INCH COMPONENT
7
8
9
10
11
12
13
Catalog Number
(Hub Only)
A
A
A
A
A
A
A
A
5A27-2008
5A27-2010
5A27-3008
5A27-3010
5A27-3012
5A27-4012
5A27-4016
5A27-4020
Catalog Number
(Spider Only)
A
A
A
A
A
A
A
A
A
5R27-2086
5R27-2092
5R27-2098
5R27-3086
5R27-3092
5R27-3098
5R27-4086
5R27-4092
5R27-4098
Coupling
Size
Code
O.D.
2008
2010
3008
3010
3012
4012
4016
4020
25/32
25/32
1-3/16
1-3/16
1-3/16
1-37/64
1-37/64
1-37/64
B
Bore
+.001
-.000
.250
.3125
.250
.3125
.375
.375
.500
.625
Durometer
Code
Color
.20
.20
.27
.27
.27
.43
.43
.43
#4-40
#4-40
#6-40
#6-40
#6-40
#10-32
#10-32
#10-32
25/32
25/32
25/32
1-3/16
1-3/16
1-3/16
1-37/64
1-37/64
1-37/64
86
92
98
86
92
98
86
92
98
Tan
Black
Rust
Tan
Black
Rust
Tan
Black
Rust
Oper.
-58F
to
+175F
-40F
to
+194F
-22F
to
+194F
Max.
Non Oper.
-76F
to
+248F
-58F
to
+248F
-48F
to
+248F
14
O.D.
L
Overall
Length
C
Distance
Between
Flanges
D
Length
Through
Bore
15
A 5Z27-20
A 5Z27-30
A 5Z27-40
25/32
1-3/16
1-37/64
1-3/16
1-37/64
2-23/64
25/64
15/32
19/32
7/16
19/32
15/16
6-70
Cap
Screw
Temp. Range
O.D.
Coupling Series
(Ref. Only)
16
Max.
Lateral
Offset
Rated
Torque
lbf in.
.007
.005
.003
.008
.006
.004
.006
.004
.002
19
26
44
48
66
110
62
88
150
Rated
Torque
lbf in.
Max.
Axial
Motion
See
Spider
Data
.030
.040
.050
SLEEVE TYPE FLEXIBLE COUPLINGS

MATERIAL:
Sleeve - Polyethylene
Insert - Acetal
Hubs - Aluminum Alloy, Anodized
R
Inch
SPECIFICATIONS:
Max. hp @
1750 rpm
Max.
Angular
Offset
Max.
Lateral
Offset
Max.
Torque
lbf in.
21
Series
22
23
1/20
1/6
1/2
.005
.010
.015
1
2
3
L
.6
18
1/16
D/2
SET SCREW
For Different Bore Combinations: Select insert and

hub assemblies and corresponding sleeve within the
same series.
Complete Coupling
B C
O.D.
HUB
INSERT
SLEEVE
5
6
INCH COMPONENT
Catalog Number
Complete Insert & Hub
Coupling
Assembly
Sleeve
Only
O.D.
B
Bore
+.001
-.000
E
L
Length Sleeve
Length
C
Hub
Dia.
D
Hub
Length
Set
Screw
A 5Z21-1604
A 5Z21-1606
A 5Z21-1608
A 5T21-1604
A 5T21-1606
A 5T21-1608
A 5R21-16
37/64
37/64
37/64
.125
.1875
.250
15/16
15/16
15/16
7/16
7/16
7/16
9/16
9/16
9/16
7/32
7/32
7/32
#4-40
#6-32
#6-32
A 5Z22-2408
A 5Z22-2410
A 5Z22-2412
A 5T22-2408
A 5T22-2410
A 5T22-2412
A 5R22-24
53/64
53/64
53/64
.250
.3125
.375
1-3/8
1-3/8
1-3/8
23/32
23/32
23/32
13/16
13/16
13/16
9/32
9/32
9/32
#6-32
#8-32
#10-32
A 5Z23-3210
A 5Z23-3212
A 5Z23-3214
A 5Z23-3216
A 5T23-3210
A 5T23-3212
A 5T23-3214
A 5T23-3216
.3125
.375
.4375
.500
1-9/16
1-9/16
1-9/16
1-9/16
11/16
11/16
11/16
11/16
1
1
1
1
3/8
3/8
3/8
3/8
#8-32
#10-32
1/4-20
1/4-20
10
A 5R23-32
1-5/64
1-5/64
1-5/64
1-5/64
Sleeve Stock Catalog Number
O.D.
Length
Inch
A 5R21-16S
A 5R21-24S
A 5R21-32S
1/2
3/4
1
10
12
12
11
12
13
14
15
6-71
16
"K" TYPE FLEXIBLE COUPLINGS

MATERIAL:
R
T
Hubs - Steel, Zinc Plated

Body - Polyurethane
A* Points
Inch
0F to +180F
FEATURES:
1
2
3
4
5
6
HUB FEATURES:
12
13
E
D
C
C
Fig. 2
Inverted Hub
INCH COMPONENT
A*
Fig. 1 Standard Hub

A 5Z 7-10606
A 5Z 7-10808
A 5Z 7-11010
A 5Z 7-11212
Fig. 2 Inverted Hub
A 5Z 7-20808
A 5Z 7-21010
A 5Z 7-21212
A 5Z 7-21414
A 5Z 7-21616
A 5Z 7-31212
A 5Z 7-31414
A 5Z 7-31616
A 5Z 7-41616
14
15
16
SET
SCREW
Fig. 1
Standard Hub
11
B
SET
SCREW
B
Bore
Catalog Number
10
A* FLATS
A* FLATS
7
8
A* Points
Absorbs angular and lateral misalignment.

Adjusts to axial end play.
Zero backlash.
Reduces bearing loads.
Runs quietly.
Speeds up to 3600 rpm.
Tough polyurethane material is strong,
flexible, cut- and tear-resistant.
Unique configuration gives maximum flexibility.
Generous radius for added strength.
Ozone-proof.
Full wraparound design stays securely in hub.
Annealed steel for maximum strength.

Zinc plating to resist corrosion.
Inverted hub to decrease overall length.
Rounded corners to prevent cutting.
Precision swaged mechanical crimp.
AGMA Class 2 bore tolerance.
6-72
C
Dia.
Max.
Max. Max.
Set Torque Angular
Screw Capacity Offset Lateral
Offset
lbf in.
Flats
Points
+.002
- .000
55/64
55/64
55/64
55/64
1
1
1
1
3/16
1/4
5/16
3/8
11/16
11/16
11/16
11/16
1/16
1/16
1/16
1/16
1-1/8
1-1/8
1-1/8
1-1/8
#6-32
#6-32
#6-32
#6-32
3
3
3
3
10
10
10
10
3/32
3/32
3/32
3/32
1-41/64
1-41/64
1-41/64
1-41/64
1-41/64
1-27/32
1-27/32
1-27/32
1-7/8
1-7/8
1-7/8
1-7/8
1-7/8
1-7/8
2-1/8
2-1/8
2-1/8
2-1/8
1/4
5/16
3/8
7/16
1/2
3/8
7/16
1/2
1/2
1
1
1
1
1
1-1/8
1-1/8
1-1/8
1-1/8
3/8
3/8
3/8
3/8
3/8
7/16
7/16
7/16
3/8
2
2
2
2
2
2-7/32
2-7/32
2-7/32
2-13/32
#10-24
#10-24
#10-24
#10-24
#10-24
1/4-20
1/4-20
1/4-20
1/4-20
12
12
12
12
12
28
28
28
40
15
15
15
15
15
15
15
15
15
1/8
1/8
1/8
1/8
1/8
3/16
3/16
3/16
1/8
MINIATURE BALL COUPLINGS

HIGH-SPEED
ACCOMMODATES AXIAL MOTION
UP TO 15 ANGULAR OFFSET
R
Inch
MATERIAL:
End Sections - 303 Stainless Steel

Center Section - Nylon or 303 Stainless Steel
FEATURES:
Allows angular and lateral

misalignment and axial motion.
A constant-velocity assembly.
Exhibits low friction loss.
Has a low moment of inertia.
Will operate well at high speeds.
Units with nylon centers provide
electrical isolation between shafts.
E
P
2
3
L (CLOSED)
SPECIFICATIONS:
SET SCREW
(SUPPLIED)
Low Backlash: 1 2
Lubrication: Molybdenum disulphide and grease
Units with other bores and/or with greater axial travel

O.D. B
Angular offset under max. operating conditions is 5.
l
MISALIGNMENT VS. SPEED & TORQUE
Angular
Misalignment
Speed
rpm
Percentage
Torque
5
6 10
11 15
20000
10000
5000
50%
66%
Catalog Number
Stainless Steel
Center
S58PY5-MJC0207
S58PY5-MJC0307
S58PY5-MJC0407
S58PZ5-MJC0310 S58PY5-MJC0310
*S58PZ5-MJC1232 *S58PY5-MJC1232
*S58PZ5-MJC1632 *S58PY5-MJC1632
*S58PZ5-MJC2032 *S58PY5-MJC2032
O.D.
O.D.
7/32
7/32
7/32
5/16
5/16
7/16
7/16
7/16
9/16
9/16
9/16
1
1
1
MAXIMUM OPERATING CONDITIONS

Torque ozf in.
E
P
S
Axial
Max.
Max.
Nylon
Stainless Lateral Axial
Shaft
Center Steel Center Offset Motion Distance
7/32
5/16
7/16
9/16
1
INCH COMPONENT
Nylon
Center
B
Bore
25
50
150
400
800
100
200
600
1600
3200
.02
.03
.05
.07
.07
+.001
-.000
L
Closed
(Typ)
Depth
of B
(Typ)
.0625
.0938
.125
.0938
.125
.125
.1875
.250
.250
.3125
.375
.375
.500
.625
9/64
9/64
9/64
5/32
5/32
3/16
3/16
3/16
5/16
5/16
5/16
17/32
17/32
17/32
5/8
5/8
5/8
23/32
23/32
7/8
7/8
7/8
1-5/16
1-5/16
1-5/16
1-7/8
1-7/8
1-7/8
1/8
1/8
1/8
1/8
1/8
3/8
13/32
1/2
11/16
13/16
Set Screw
T
(Typ)
Size
(Typ)
.06
.06
.06
.08
.08
.11
.11
.11
.16
.16
.16
.25
.25
.25
#2-56
#2-56
#2-56
#2-56
#2-56
#4-40
#4-40
#4-40
#10-32
#10-32
#10-32
1/4-20
1/4-20
1/4-20
* These couplings utilize four ball races for smoother operation and larger torque capacity.
Angular relationship between tapped holes may vary freely.
6
7
8
9
10
11
12
13
14
15
6-73
16
SPRING COUPLINGS
SHOCK-ABSORBING
R
T
1
2
3
MATERIAL:
Inch
Hub - Aluminum Alloy

Spring - 300 Series Stainless Steel oval section

FEATURES:
Protects gear and timing belt drives

from excessive shock loads.
Suitable for high-speed drives.
Not affected by heat or oils.
Will accommodate shafts that are
angularly or parallel offset.
Also available with stainless steel hubs &
set screws for extra corrosion resistance.
SET SCREW (TYP)
B
1/4
Catalog Number *
10
11
12
13
14
15
16
B
Bore
+.001
-.000
.1875
6-74
1/4
1-13/16 1/16
INCH COMPONENT
A 5Z26-0606
9/16
19/32
5
6
Set
Screw
#6-32
Max.
Torque
lbf in.
12
Radial
Deflection
Degrees per
lbf in.
3
UNIFLEX COUPLINGS
MATERIAL:
Spring - 1095 Steel

Hubs - Cold Rolled Steel
R
Inch
250F Max.
MAXIMUM SPEED:
30000 rpm
SPECIFICATION:
For all A 5C 5-18 Series, the diameter

of the spring is the same as that of the hubs.
2
LENGTH 1/32
3
S
P
+.001
B -.000
B C
INCH COMPONENT
Catalog Number
Length
Regular
Short
B
Bore
(Thru)
Regular
Short
C
Hub
O.D.
A 5C 5-1804
A 5C 5-1806
A 5C 5-1808
1/8
3/16
1/4
1
1
1
.61
.61
.61
5/16
5/16
5/16
5/32
5/32
5/32
#6-32
#6-32
#6-32
6-2504
6-2506
6-2508
6-2510
1/8
3/16
1/4
5/16
1-33/64
1-33/64
1-33/64
1-33/64
1
1
1
1
.73
.73
.73
.73
3/8
3/8
3/8
3/8
5/32
5/32
5/32
5/32
#6-32
#6-32
#6-32
#6-32
A 5C 6-3708
A 5C 6-3712
1/4
3/8
2-1/16
2-1/16
1-43/64
1-43/64
.86
.86
5/8
5/8
1/4
1/4
#10-24
#10-24
A 5C 6-5012
A 5C 6-5016
3/8
1/2
2-33/64
2-33/64
1-27/32
1-27/32
1.04
1.04
3/4
3/4
5/16
5/16
1/4-20
1/4-20
A
A
A
A
5C
5C
5C
5C
5-2504
5-2506
5-2508
5-2510
A 5C 5-3708
A 5C 5-3712
A 5C 5-5012
A 5C 5-5016
A
A
A
A
Coupling Series
(Ref. Only)
A
A
A
A
A
A
A
5C
5C
5C
5C
5C
5C
5C
5-18...
5-25...
5-37...
5-50...
6-25...
6-37...
6-50...
5C
5C
5C
5C
lbf in.
H.P.
Per
100
18
34
39
82
34
39
82
.03
.05
.06
.13
.05
.06
.13
Max.
Torque
rpm
D
Hub
Length
P
Set
Screw
Max.
Maximum
Wind-up Angular
Maximum
Offset Lateral Offset Recommended
At Max. At Zero Lateral
At
Zero
Angular
Torque Misalignment Misalignment Axial Motion
1.80
1.80
1.78
1.82
1.07
1.09
1.05
3.0
4.5
4.5
4.5
3.0
3.0
3.0
.008
.011
.014
.021
.007
.009
.014
.010
.020
.020
.020
.015
.015
.010
7
8
9
10
11
12
13
14
15
6-75
16
I
R
T
RIGID FAIRLOC SHAFT COUPLINGS

NONMARRING
ADJUSTABLE
RIGID
Inch
MATERIAL:
303 Stainless Steel
1
Precision
Component
Other sizes material, available on special order.

Suggested clearance fit between the bore and
shaft is .0001/.0008.
2
3
5/8
#2-56
SOCKET HEAD
CAP SCREW
.265
#2-56
SOCKET HEAD
CAP SCREW
.31
4
A1
+.0005
+.0005
B1 -.0000
B2 -.0000
A2
6
NOTE: B1 & B2 concentric with .001 T.I.R.
7
8
9
10
11
12
13
INCH COMPONENT
Catalog Number
B1
Bore
A1
Dia.
Clear.
Radius
B2
Bore
A2
Dia.
Clear.
Radius
S51FCZ-090120
S51FCZ-090125
S51FCZ-090187
S51FCZ-090250
S51FCZ-094125
S51FCZ-094187
S51FCZ-094250
S51FCZ-120120
S51FCZ-120125
S51FCZ-120187
S51FCZ-120241
S51FCZ-120250
S51FCZ-125125
S51FCZ-125187
S51FCZ-125241
S51FCZ-125250
S51FCZ-187187
S51FCZ-187241
S51FCZ-187250
S51FCZ-250250
.0900
.0900
.0900
.0900
.0937
.0937
.0937
.1200
.1200
.1200
.1200
.1200
.1248
.1248
.1248
.1248
.1873
.1873
.1873
.2498
.437
.437
.437
.437
.437
.437
.437
.437
.437
.437
.437
.437
.437
.437
.437
.437
.437
.437
.437
.530
.273
.273
.273
.273
.273
.273
.273
.273
.273
.273
.273
.273
.273
.273
.273
.273
.273
.273
.273
.304
.1200
.1248
.1873
.2498
.1248
.1873
.2498
.1200
.1248
.1873
.2405
.2498
.1248
.1873
.2405
.2498
.1873
.2405
.2498
.2498
.437
.437
.437
.530
.437
.437
.530
.437
.437
.437
.530
.530
.437
.437
.530
.530
.437
.530
.530
.530
.273
.273
.273
.304
.273
.273
.304
.273
.273
.273
.304
.304
.273
.273
.304
.304
.273
.304
.304
.304
14
15
16
6-76
SHAFT COUPLINGS
PRECISION SHAFT COUPLINGS
MATERIAL:
Inch
303 Stainless Steel
Stainless steel socket head set screws supplied.

B1 & B concentric with .0005 T.I.R.
A/4
A/4
O.D.
A/4
A/4
O.D.
T
1
B1
1
Precision
Component
SUB DRILL (2)
SUB DRILL (2)
Fig. 1
Fig. 2
INCH COMPONENT
Catalog Number
B1
Bore
B
Bore
O.D.
.010
Set
Screw
Sub
Drill
+.0005
-.0000
+.0005
-.0000
S5035Y-G50-1
S5046Y-G50-2
S5068Y-G50-3
.1248
.1873
.2498
5/16
3/8
1/2
.43
.50
.56
#2-56
#4-40
#6-32
.029
.040
.070
S5123Y-G50-4
S5134Y-G50-6
S5147Y-G50-7
S5157Y-G50-9
.1200
.1248
.1248
.1873
.1248
.1873
.2498
.2498
1/4
3/8
1/2
1/2
.43
.50
.56
.56
.210
.245
.275
.275
#2-56
#2-56 / #4-40
#2-56 / #6-32
#4-40 / #6-32
.029
.029 / .040
.029 / .070
.040 / .070
Fig. 1
Fig. 2
SHAFT COUPLINGS
303 Stainless Steel
Brass, Zinc Plated
Aluminum, Chromic Acid Anodized
Stainless steel socket head set screws supplied.

Other bores available on special order.
SET SCREW
SET SCREW
3/16
3/16
O.D.
3/16
3/16
B
O.D.
3/4
B1
3/8
3/4
Fig. 1
INCH COMPONENT
B1
Bore
Catalog Number
Fig. 1
S5925Y-SO23-01
S5925Y-SO23-02
S5925Y-SO23-03
Fig. 2
S5925Y-SO23-04
S5925Y-SO23-05
7
8
MATERIAL:
Stainless
Steel
10
11
12
Fig. 2
B
Bore
O.D.
Set
Screw
Brass
Aluminum
+.0005
-.0000
+.0005
-.0000
S5925Y-SO22-01
S5925Y-SO22-04
S5925Y-SO22-07
S5925Y-SO22-02
S5925Y-SO22-05
S5925Y-SO22-08
.1875
.2500
.2500
.3750
7/16
7/16
1/2
9/16
#6-32
#6-32
#6-32
#6-32
S5925Y-SO22-13
S5925Y-SO22-11
S5925Y-SO22-14
.1250
.2500
.1875
.3750
7/16
9/16
#4-40
#6-32
6-77
13
14
15
16
TORQUE TUBE COUPLINGS

MATERIAL:
R
T
Torque Tube - Acetal

Split Hubs - Aluminum
Inch
FEATURES:
1
2
3
4
5
6
7
Accommodates angular shaft misalignment.

Clamp type hubs, no flats required on shafts,
no set screws, does not mar shafts.
One-piece assembly, no loose
parts to assemble or adjust.
APPLICATIONS:
Business machines
Computer peripherals
Printing equipment
Packaging machinery
Instrument drives
Servomechanisms
10
11
Speeds to 2000 rpm

Standard lengths up to 3
Zero radial play
Maximum Torque: 25 lbf in.
.36
.94
.87
MOUNTING INSTRUCTIONS:
Mount coupling on shafts. Tighten clamping screws. Do not compress the unit
axially during installation. Torque Tube Couplings have an internal compression
spring which preloads the ends against axial movement and backlash.
Other bores and lengths available on special order.
INCH COMPONENT
A
Bore
Catalog Number
L = 1.5
L = 2.0
L = 3.0
S59DZ6-TT030306
S59DZ6-TT030406
S59DZ6-TT040406
S59DZ6-TT040506
S59DZ6-TT050506
S59DZ6-TT050606
S59DZ6-TT060606
S59DZ6-TT030308
S59DZ6-TT030408
S59DZ6-TT040408
S59DZ6-TT040508
S59DZ6-TT050508
S59DZ6-TT050608
S59DZ6-TT060608
S59DZ6-TT030312
S59DZ6-TT030412
S59DZ6-TT040412
S59DZ6-TT040512
S59DZ6-TT050512
S59DZ6-TT050612
S59DZ6-TT060612
12
13
14
15
16
.36
SPECIFICATIONS:
8
9
L 1/32
A
6-78
+.001
-.000
.1880
.1880
.2500
.2500
.3130
.3130
.3750
B
Bore
+.001
-.000
.1880
.2500
.2500
.3130
.3130
.3750
.3750
SHAFT COUPLINGS
RIGID SHAFT COUPLINGS
MATERIAL:
Steel, Zinc Plated
Inch
T
1
SET SCREW
D
SET SCREW
D
O.D.
Fig. 1
INCH COMPONENT
L
Fig. 2
O.D.
B
Bore
B1
Bore
L
Length
Set
Screw
+.002
-.000
+.002
-.000
Fig. 1
Fig. 2
2
B O.D.
B1
Catalog Number
A
A
A
A
A
A
5C
5C
5C
5C
5C
5C
9-0606
9-0808
9-1010
9-1212
9-1414
9-1616
7/16
1/2
5/8
3/4
7/8
1
.1875
.250
.3125
.375
.4375
.500
3/16
3/16
3/16
3/16
3/16
3/16
3/4
3/4
3/4
3/4
3/4
3/4
#8-32
#10-24
#10-24
1/4-20
1/4-20
1/4-20
A
A
A
A
A
A
A
A
5C
5C
5C
5C
5C
5C
5C
5C
9-0608
9-0610
9-0612
9-0810
9-0812
9-0814
9-0816
9-1216
1/2
5/8
3/4
5/8
3/4
7/8
1
1
.1875
.1875
.1875
.250
.250
.250
.250
.375
.250
.3125
.375
.3125
.375
.4375
.500
.500
3/8
3/8
3/8
3/8
3/8
1/2
1/2
1/2
3/16
3/16
3/16
3/16
3/16
1/4
1/4
1/4
3/4
3/4
3/4
3/4
3/4
1
1
1
#10-24
#8-32 / #10-24
#8-32 / 1/4-20
#10-24
1/4-20
1/4-20
1/4-20
1/4-20
PRECISION MULTIJAWED COUPLINGS

64 PITCH
48 TEETH
5
6
7
8
9
10
.37
MATERIAL:
.12
303 Stainless Steel
Stainless steel socket head

set screws supplied.
Precision
Component
.87
11
.12
.75
I.D.
SUB DRILL
12
13
SET SCREW
INCH COMPONENT
Catalog Number
+.0005
-.0000
I.D.
C
Hub Dia.
Set
Screws
Sub
Drill
Max. Torque
ozf in.
14
S9917Z-G51-2
S9917Z-G51-3
S9917Z-G51-4
.1248
.1873
.2498
5/16
3/8
1/2
#2-56
#4-40
#6-32
.029
.040
.070
500
500
500
15
6-79
16
I
R
FLEXIBLE SHAFTS
NONMAGNETIC
MINIMUM OPERATING RADIUS 3-1/2 INCHES
MATERIAL:
T
1
2
Inch
Flexible Cable - Phosphor Bronze

End Fittings - Brass, Tin Plated
Screws - 300 Series Stainless Steel
SPECIFICATIONS:
Maximum Torque: 3.5 lbf in.

Minimum Operating Radius: 3-1/2 inches
Torsional Deflection:
1.8 per lbf in. per inch of flexible shaft in winding direction
2.6 per lbf in. per inch of flexible shaft in unwinding direction
L
.130
1/2
#8-32 SOCKET HEAD SET
SCREW AT EACH END
5
6
7
8
END FITTING (TYP)
INCH COMPONENT
Torsional Deflection
@ 1 lbf in. Torque
Catalog Number
L
Length
Max.
Angular
Offset
Winding
Unwinding
S55PP7-FS0832
S55PP7-FS0840
S55PP7-FS0848
S55PP7-FS0856
4
5
6
7
37.8
54.2
70.6
86.9
4.1
5.1
7.8
9.6
6.0
8.6
11.2
13.8
9
10
11
12
13
14
15
16
27/32
.252 BORE 3/8 DP.
.250
6-80
FLEXIBLE SHAFTS REMOTE CONTROL ASSEMBLIES

STAINLESS STEEL
WITHOUT CASING
MATERIAL:
Inch
Flexible Cable - Stainless Steel

End Fittings - Stainless Steel
SPECIAL ORDERS for Many Combinations of Fittings and

Lengths Accepted.
PERFORMANCE DATA:
Mode
Shaft
of
Diameter Operation
.150
.150
.188
.188
.250
.250
Manual
Dynamic
Manual
Dynamic
Manual
Dynamic
Operating Torque Capacity, Winding

and Unwinding Directions, (lbf in.) Input
25"
20"
Radius of Curvature
15"
12"
10"
8"
67
34
20.4
10.6
32.4
16.2
64.0
32.0
19.1
10.0
30.4
15.2
58.0
29.0
18.2
9.4
28.4
14.2
54.0
27.0
16.8
8.7
26.4
13.2
48.0
24.0
15.0
7.8
23.6
11.8
40.0
20.0
4"
6.0
3.1
9.4
4.7
lbf in. Winding Unwinding

1
8.0
9.0
1
8.0
9.0
1
2.3
2.7
1
2.3
2.7
10
12.0
12.0
10
12.0
12.0
Flexible
L
Shaft
Length
in.
Diameter
4
4
6
6
8
8
12
12
8
8
10
10
12
12
10
10
12
12
14
14
3/8
11/32
1/2
.253
.251
#8-32
End Fitting
No. 1
7/32
13/16
3/16
7/16
End
Fitting
Number
1
2
2
3
2
3
2
3
2
3
2
3
2
3
2
3
2
3
3
4
11/16
5/16
1/4
.190
.188
END
FITTING
SOCKET HEAD SET SCREW
5/32
FLEXIBLE SHAFT DIA.
INCH COMPONENT
.150
.150
.150
.150
.150
.150
.150
.150
.187
.187
.187
.187
.187
.187
.250
.250
.250
.250
.250
.250
6"
12.0
6.2
19.0
9.5
27.0
14.0
L 1/16
Manual Torque Capacity - The safe working

torque in lbf in. for remote control flexible
shafts when operated manually or at speeds
up to 100 rpm.
END
Dynamic Torque Capacity - The safe working
FITTING
torque in lbf in. for remote control flexible
shafts when operated mechanically at speeds
from 100 rpm to 3000 rpm on duty cycles not
exceeding 5 minutes duration with rest intervals
of a minimum of 2 minutes.
Torsional Deflection - The accuracy required between
the control and controlled elements measured in degrees
per foot of shaft per lbf in. load.
Radius of Curvature - The radius of the smallest curve in
which the particular shaft should be operated.
S55SS7-FS061504
S55SS7-FS081504
S55SS7-FS081506
S55SS7-FS101506
S55SS7-FS081508
S55SS7-FS101508
S55SS7-FS081512
S55SS7-FS101512
S55SS7-FS081908
S55SS7-FS101908
S55SS7-FS081910
S55SS7-FS101910
S55SS7-FS081912
S55SS7-FS101912
S55SS7-FS082510
S55SS7-FS102510
S55SS7-FS082512
S55SS7-FS102512
S55SS7-FS102514
S55SS7-FS122514
Max. Torsional Deflection at Load Indicated
(Degrees per Foot of Shaft)
REMOTE CONTROL NOMENCLATURE
Catalog Number
#8-32
End Fitting
No. 2
10
1-1/16
19/32
7/16
11
9/16
.315
.313
#10-32
End Fitting
No. 3
1/4
5/8
1/2
1-1/4
12
13
5/8
14
.378
.375
#10-32
(2 SET SCREWS)
End Fitting
No. 4
6-81
15
16

WITHOUT CASING
MATERIAL:
Flexible Cable - Steel

End Fittings - Plated Steel
T
1
2
3
4
5
6
7
Inch
Mode
Shaft
of
Dia. Operation

Radius of Curvature
25" 20" 15" 12" 10" 8" 6" 4" 2.5" 2"
.098
.130A
.130
.130
.150
.150
.188
.188
.250
.250
93
47
Dynamic
Manual
Manual
Dynamic
Manual
Dynamic
Manual
Dynamic
Manual
Dynamic
20.9
10.5
33.4
16.7
89.0
41.0
19.5
9.8
31.4
15.7
83.0
41.0
1.9
7.6
3.8
18.4
9.2
29.4
14.7
76.0
38.0
1.8
7.1
3.6
17.2
8.6
27.6
13.8
70.0
35.0
.9
1.4
2.0
5.6 3.6
2.8 1.8
12.1 6.2
6.1 3.1
19.8 10.0
9.9 5.0
45.0
23.0
1.7
6.6
3.3
15.3
7.7
24.8
12.4
62.0
31.0
NOTE: .130A diameter shaft has a greater

degree of flexibility.
13
14
15
16
1.12
*
1.5
* Can be operated manually to radius

indicated with torsional breaking
strength of 6.0 lbf in. clockwise.
END
FITTING
Can be used in dynamic mode if shaft

length is shortened (approximately 2" long).
1
1
1
1
1
1
1
1
10
10
.47
SOCKET HEAD SET SCREW
9/16
SPECIAL ORDERS for Many Combinations of Fittings and

Lengths Accepted.
1/4
1/8
5/32
3/8
.128
.126
Catalog Number
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
7C12-03311
7C12-05322
7C12-08333
7C12-03411A
7C12-05422A
7C12-08433A
7C12-03422
7C12-05433
7C12-08433
7C12-04522
7C12-06533
7C12-08533
7C12-12533
7C12-10633
7C12-12633
7C12-12833
7C12-14844
6-82
250.0
50.0
13.0
13.0
6.0
6.0
3.3
3.3
13.0
13.0
Flexible
L
Shaft
Length
Diameter
in.
3
5
8
3
5
8
3
5
8
4
6
8
12
10
12
12
14
End
Fitting
Number 3/16
1
2
3
1
2
3
2
3
3
2
3
3
3
3
3
3
4
END
FITTING
11/16
5/16
1/4
.190
.188
#4-40
End Fitting
No. 1
.098
.098
.098
.130A
.130A
.130A
.130
.130
.130
.150
.150
.150
.150
.187
.187
.250
.250
80.0
40.0
13.0
13.0
6.0
6.0
3.0
3.0
10.0
10.0
7/16
INCH COMPONENT
12
1.5" lbf in. Winding Unwinding
L 1/16
11
FLEXIBLE SHAFT DIA.
10
PERFORMANCE DATA:
3/8
11/32
#8-32
End Fitting
No. 2
13/16
1/2
.253
.251
#8-32
End Fitting
No. 3
7/32
1-1/16
19/32
7/16
9/16
.315
.313
#10-32
(2 SET SCREWS)
End Fitting
No. 4

PANEL MOUNTING
WITHOUT CASING
MATERIAL:
Inch

PERFORMANCE DATA:
Shaft
Dia.
Mode
of
Operation
.130A
.130
.150
.188
Manual
Manual
Manual
Manual
25"

Radius of Curvature
15" 12" 10" 8"
6"
4" 2.5" 2"
20.9
33.4
19.5
31.4
7.6
18.4
29.4
7.1
17.2
27.6
6.6
15.3
24.8
5.6
12.1
19.8
2.0
3.6
6.2
10.0
1.5
1.12
1.5" lbf in. Winding Unwinding

.47
1
1
1
1
40.0
13.0
6.0
3.0
50.0
13.0
6.0
3.3
2
3
NOTE: .130A diameter shaft has a greater degree of flexibility.
SPECIAL ORDERS for Many Combinations of Fittings and Lengths Accepted.

L 1/16
FLEXIBLE
SHAFT DIA.
5/16
1/4
3/8
1/8 MAX.
PANEL THICKNESS
END
FITTING
1/4
1/8
9/16
3/8
7/64
1/4-32 THD.
.125
1-5/32
.128
.126
SOCKET HEAD
SET SCREW
Fig. 1
7/16
1/2
End Fitting
No. 1
L 1/16
FLEXIBLE
SHAFT DIA.
1/2
#4-40
3/8 MAX.
PANEL THICKNESS
END
FITTING
5/32
11/16
5/16
1/4
7/16
7/32
1/4
3/8-32 THD.
.190
.188
SOCKET HEAD
SET SCREW
Fig. 2
#8-32
End Fitting
No. 2
INCH COMPONENT
Catalog Number
Flexible
L
Shaft
Length
Diameter
in.
End
Fitting
Number
3/16
3/8
11/32
10
11
13/16
12
Fig. 1
Fig. 2
A 7C13-03411A
A 7C13-04422A
A
A
A
A
A
A
A
7C13-03411
7C13-04422
7C13-05522
7C13-08533
7C13-09622
7C13-08633
7C13-14633
.130A
.130A
.130
.130
.150
.150
.187
.187
.187
3
4
3
4
5
8
9
8
14
1
2
1
2
2
3
2
3
3
1/2
13
.253
.251
#8-32
End Fitting
No. 3
14
15
6-83
16

WITH CASING
R
T
1
2
3
4
5
6
MATERIAL:

Flexible Casing - Vinyl Covered Steel
Inch
SPECIAL ORDERS for Many Combinations

of Fittings and Lengths Accepted.
PERFORMANCE DATA:
Mode
Shaft
of
Dia. Operation
.130
.130
.150
.150
.187
.187
.250
.250
25"
Manual
Dynamic
Manual
Dynamic
Manual
Dynamic
Manual
Dynamic
93.0
47.0

Radius of Curvature
20"
15"
12"
10"
8"
6"
20.9
10.5
33.4
16.7
89.0
45.0
19.5
9.8
31.4
15.7
83.0
41.0
7.6
3.8
18.4
9.2
29.4
14.7
76.0
38.0
7.1
3.6
17.2
8.6
27.6
13.8
70.0
35.0
6.6
3.3
15.3
7.7
24.8
12.4
62.0
31.0
5.6
2.8
12.1
6.1
19.8
9.9
45.0
23.0
1/8
1/4
2-1/2
10
3/16
7/16
#4-40
.128
.126 (SEE NOTE)
.190
.188
#8-32
(SEE NOTE)
A
A
A
A
A
A
A
7Z11-24433
7Z11-24533
7Z11-36533
7Z11-30633
7Z11-24833
7Z11-36833
7Z11-48833
7/32
Flexible
L
Shaft
Length
Diameter
in.
.130
.150
.150
.187
.250
.250
.250
24
24
36
30
24
36
48
Standard
End
Fitting
Fig.
3
3
3
3
3
3
3
NOTES: Fig. 1 style end fitting for .187 diameter flexible shaft has two set screws.
End fittings for .250 diameter flexible shaft have two set screws.
6-84
#8-32
.253
(SEE NOTE)
.251
Fig. 3 (Standard)
Fig. 2
INCH COMPONENT
Catalog Number
3/8
1/2
Fig. 1
11
16
5/16
5/32
3/8
15
3.6
1.8
6.2
3.1
10.0
5.0

1
13.0
13.0
1
13.0
13.0
1
6.0
6.0
1
6.0
6.0
1
3.0
3.3
1
3.0
3.3
10
10.0
13.0
10
10.0
13.0
FLEXIBLE SHAFT DIA.
14
4"
L 1/16
SOCKET HEAD
SET SCREW (SEE NOTE)
13
End Fitting Fig. 1, Fig. 2 & Fig. 4 are available on special order.
12
7/16
9/16
.315
.313
#10-32
(SEE NOTE)
Fig. 4
FLEXIBLE SHAFTS POWER DRIVE ASSEMBLIES

WITH CASING
MATERIAL:

Bearings - Sintered Bronze
Inch
SPECIAL ORDERS for Many

Combinations of Fittings and
Lengths Accepted.
PERFORMANCE DATA:
Shaft
Dia.
Minimum
Operating
Radius
in.
25"
Dynamic Torque Capacity,

Winding Direction (lbf in.) Input
Radius of Curvature
20"
15"
12"
10"
8"
.130
.150
.187
.250
3.0
4.0
4.0
4.0
25.0
13.5
24.0
3.8
5.0
12.6
22.0
3.6
4.7
11.8
21.0
3.4
4.4
11.0
19.0
3.1
3.9
9.8
16.0
6"
4"
2.4
3.1
7.8
12.0
1.7
1.4
4.0
Torsional *
Breaking Load
For Straight Shafts,
Winding Direction
lbf in.
15
24
55
100
* Shaft will break or helix under these loads. For routine tests, do not specify
more than approximately 50% of these figures. Otherwise, the flexible shaft
may be seriously damaged.
DRIVE
INPUT END
L 1/16
FLEXIBLE SHAFT DIA.
5/32
3/8
5/16
3/16
7/16
#4-40
.128
.126 (SEE NOTE)
3/8
10
1/2
.190
.188
Fig. 1
#8-32
(SEE NOTE)
.253
.251
Fig. 2
#8-32
(SEE NOTE)
Fig. 3 (Standard)
INCH COMPONENT
A
A
A
A
A
A
A
7Z10-N24433
7Z10-N24533
7Z10-N36533
7Z10-N30633
7Z10-N36633
7Z10-N24833
7Z10-N36833
Flexible
L
Shaft
Length
in.
Diameter
.130
.130
.150
.150
.187
.187
.250
24
24
36
30
36
24
36
2-1/2
CW
1/4
SOCKET HEAD
1/8
Fig. 3 is the standard end fitting.
Catalog Number
Standard
End
Fitting
Fig.
3
3
3
3
3
3
3
7/32
11
12
7/16
13
9/16
.315
.313
#10-32
(SEE NOTE)
Fig. 4
14
15
NOTES: Fig. 1 style end fitting for .187 diameter flexible shaft has two set screws.
End fittings for .250 diameter flexible shaft have two set screws.
6-85
16
I
R

WITH CASING
PANEL MOUNTING
MATERIAL:
T
1
Inch

SPECIAL ORDERS for Many Combinations

of Fittings and Lengths Accepted.
PERFORMANCE DATA:
2
3
4

Radius of Curvature
20"
15"
12"
10"
8"
6"
4"
Mode
of
Operation
Shaft
Dia.
.130
.150
.187
Manual
Manual
Manual
20.9
33.4
19.5
31.4
5.6
12.1
19.8
END FITTING
1/8
3/8
3/16
.190
.188
Fig. 1
#8-32
A
A
A
A
A
7C14-24433
7C14-30533
7C14-36533
7C14-20633
7C14-32633
Fig. 2
Standard
Flexible
L
End
Shaft
Length
Fitting
Diameter
in.
Fig.
.130
.150
.150
.187
.187
24
30
36
20
32
3
3
3
3
3
NOTE: Fig. 1 style end fitting for .187 diameter flexible shaft has two set screws.
14
15
6-86
7/32
3/8
.253
.251
#8-32
Fig. 3 (Standard)
INCH COMPONENT
Catalog Number
1/4
1/2
7/16
#4-40
.128
.126 (SEE NOTE)
10
5/16
5/32
1/2
7/16
3/8-32 THD
BUSHING
FLEXIBLE SHAFT DIA.
1/4
1/2
3/16 MAX.
PANEL THICKNESS
SOCKET HEAD
16
3.6
6.2
10.0
L 1/16
13
6.6
15.3
24.8
2-1/2
12
7.1
17.2
27.6

1
13.0
13.0
1
6.0
6.0
1
3.0
3.0
Fig. 3 is the standard end fitting.
11
7.6
18.4
29.4
7/32
7/16
9/16
.315
.313
Fig. 4
#10-32
COMPARING COUPLING CAPABILITIES

Bellows Couplings
Inch
Pages 6-6 thru 6-23
Misalignment Capability: Good

Torsional Rigidity: Excellent
Torque Capacity: Excellent
Vibration Damping: No
Inertia: Low
Fairloc Bellows Couplings

pg. 6-6
Precision Bellows Couplings Bellows Couplings, Clamp Type

Short & Long Series pgs. 6-18 & 6-19
pg. 6-22
T
1
2
Flexible Couplings
Pages 6-25 thru 6-45
Misalignment Capability: Excellent

Torsional Rigidity: Low - Moderate
Torque Capacity: Low - Moderate
Vibration Damping: Good
Long Series Flexible Helical Couplings Slit Type MSC Flexible Couplings
Inertia: Low
Set Screw Type
pg. 6-37
3
Split Hub Type
pg. 6-44
Disc Couplings

Misalignment Capability: Good
Torsional Rigidity: Excellent
Torque Capacity: Excellent
Inertia: Low
6
Double Disc Flexible Couplings
Split Hub Type
pg. 6-49
Heavy-Duty Single Disk Flexible

Couplings
pg. 6-50
Oldham Couplings
Misalignment Capability: Good - Excellent

Torque Capacity: Low - Moderate
Vibration Damping: Fair
Precision Oldham Couplings, Pin Type
Inertia: Low - Moderate
pg. 6-67
Oldham Couplings, Set Screw Hub

pg. 6-69
9
10
Jaw Couplings

Misalignment Capability: Fair
Torque Capacity: Moderate - High
Vibration Damping: Good
Inertia: Moderate
11
Heavy-Duty Spline Type Flexible Couplings, Hytrel Spline
pg. 6-55
Rigid Couplings
12
13
Misalignment Capability: No
Torsional Rigidity: High
Torque Capacity: High
Inertia: Low - Moderate
14
Rigid Fairloc Shaft Couplings
pg. 6-76
Precision Shaft Couplings

pg. 6-77
6-87
15
16
7 - UNIVERSAL JOINTS METAL

R
Catalog
Series
T
1
2
Inch
Unique Features
Material
Bore 0
Pages
Single, Miniature,
Zero Backlash
Solid
303 Stainless Steel Body,
440 Stainless Steel Balls .0938 to .250
7-4
Double, Miniature,
Zero Backlash

.0938 to .250
440 Stainless Steel Balls
7-4
Single, Inverted Design, 303 Stainless Steel Body,

.1875 to .500
Zero Backlash
7-5
Double, Inverted Design, 303 Stainless Steel Body,

.1875 to .500
Zero Backlash
7-5
Single, Short Series,

Solid and Bored
303 Stainless Steel
Solid
3/16 to 1/2
7-6
Single,
Step-Down Series
303 Stainless Steel
.125 to .250
7-6
Single, Standard Design,

Solid and Bored
Alloy Steel
Solid
.1875 to .500
7-7
Single,
Solid and Bored
Alloy Steel
S57PY5-SU
3
S57PY5-DU
4
5
S57PY4-SFU
6
7
S57PY4-DFU
8
9
A 5Y 8-DM
10
11
A 5Y 8-DU
12
A 5Q 8-D
13
14
A 5Q 8-DM
15
16
7-2
7-0
Solid
3/16 - 1/2
7-8
7 - UNIVERSAL JOINTS METAL

R
Catalog
Series
Inch
Unique Features
Single,
Hand-Operated
Material
Die Cast Zinc
Bore 0
Pages
1/4 to 1/2
7-8
A 5Q 8-D
A 5X 8-SE
T
1
2
Double, Telescoping,
Heat- and
Corrosion-Resistant
303 Series SS Joints,

.2500 to .6250
416 Stainless Steel Spline
7-9
3
4
Double,
Slow Speed
Alloy Steel
Solid
.1875 to .5000
7-9
A 5Q 8-DD
6
S57PY5-DUT
S57PY4-DFUT
Miniature, Ball Spline,
Zero Backlash

.0938 to .2500
7-10
Inverted Design,
Ball Spline,
Zero Backlash

440 Stainless Steel Balls .1875 to .5000
7-10
Single, Molded,
Economy Series
7
8
9
Acetal
1/8 to 7/16
7-12
A 5M 8-D
10
11
Double, Molded,
Economy Series
Acetal
1/8 to 7/16
7-12
12
A 5M 8-DD
13
14
15
7-1
16
7 - UNIVERSAL JOINTS MOLDED

R
Catalog
Series
T
1
2
Inch
Unique Features
Single, Molded,
Brass Spider
Material
Bore 0
Pages
Acetal Body,
Brass Spider
1/8 to 7/16
7-13
Acetal Body,
Brass Spider & Inserts
1/8 to 3/8
7-13
Acetal Body,
Brass Spider
1/8 to 7/16
7-14
1/8 to 3/8
7-14
Acetal
3/16, 1/4, 5/16
7-15
Acetal Body & Extension,

Brass Spider
3/16 & 1/4
7-16
Acetal Body and

Extension, Brass Spider
and Inserts
1/8 & 3/16
7-16
A 5T 8-D
Single, Molded,
Brass Spider & Inserts
A 5Z 8-D
4
Double, Molded,
Brass Spider
5
A 5T 8-DD
6
7
Double, Molded,
Acetal Body,
Brass Spider and Inserts Brass Spider and Inserts
A 5Z 8-DD
8
Molded, Economy Series
A 5M 8-SE
10
11
A 5T 8-SE3
12
A 5Z 8-SE3
Molded, Brass Spider,
3/8 O.D.
Molded, Brass Spider
and inserts, 3/8 O.D.
13
Molded, Brass Spider,
1/2 O.D.
14
A 5T 8-SE4
15
16
7-2
Acetal Body and

3/16, 1/4, 5/16
7-17
7 - UNIVERSAL JOINTS MOLDED

R
Catalog
Series
Inch
Unique Features
and Inserts, 1/2 O.D.
Material
Acetal Body and

and Inserts
Bore 0
3/16 & 1/4
Pages
7-17
A 5Z 8-SE4..
A 5Z 8-SEB
T
1
2
Inserts and Extension
Acetal Body, Brass

Spider, Inserts and
Extension
1/8 to 3/8
7-18
3
4
5
6
7
8
9
10
11
12
13
14
15
7-3
16
I
R
MINIATURE UNIVERSAL JOINTS

SINGLE & DOUBLE JOINT
ZERO BACKLASH
MATERIAL:
Inch
Body - 303 Stainless Steel

LUBRICATION:
1
Precision
Component
Dual protection, with sealed-in solid

film plus oil suspension.
FEATURES:
2
3
Zero backlash through use of precision

balls and burnished sockets.
Sealed-in lubrication.
Lightweight.
Low inertia.
SPECIFICATIONS:
4
5
6
7
10
11
12
13
O.D.
L
F
These joints may be made into

telescoping units by mating them
with telescoping miniature ball
splines on pages 4-22 & 4-23.
Fig. 2 Double Joint
INCH COMPONENT
Catalog Number
Fig. 1 Single Joint
S57PY5-SU0006
S57PY5-SU0306
S57PY5-SU0406
S57PY5-SU0609
S57PY5-SU0812
Fig. 2 Double Joint
S57PY5-DU0306
S57PY5-DU0406
S57PY5-DU0609
S57PY5-DU0812
14
15
16
Fig. 1 Single Joint
Set screws are available

on special order.
8
9
O.D.
Maximum Operating Angle:

Fig. 1 Single Joint: 30 @ 4000 rpm
Fig. 2 Double Joint: 60 @ 4000 rpm
Torque Ratings:
For static conditions with in-line loading,
maximum load being one which causes
joint to yield.
7-4
B
Bore
+.0005
-.0000
C
Bore
Depth
E
End
Unit
F
Center
3/16
3/16
3/16
9/32
3/8
Solid
.0938
.1250
.1875
.2500
11/32
11/32
7/16
1/2
1/2
1/2
1/2
11/16
7/8
1
1
1
1-3/8
1-3/4
16
16
16
64
256
3/16
3/16
9/32
3/8
.0938
.1250
.1875
.2500
11/32
11/32
7/16
1/2
1/2
1/2
11/16
7/8
1/2
1/2
5/8
3/4
1-1/2
1-1/2
2
2-1/2
16
16
64
256
O.D.
Torque
ozf in.
INVERTED DESIGN UNIVERSAL JOINTS

ZERO BACKLASH
MATERIAL:
Inch
Body - 303 Stainless Steel

1
Precision
Component
LUBRICATION:
Dry film plus oil suspension
T
1
FEATURES:
Zero backlash is attained with patented

design and close dimensional control
of components.
Torque is transmitted by hardened steel
balls operating in burnished sockets.
Elastic preload between components
eliminates all clearances.
Inverted design reduces size and
weight for a given torque capacity.
Inverted design reduces inertia.
Sealed-in lubrication.
2
L
C
D
E
B O.D.
SPECIFICATIONS:
Maximum Operating Angle:

Fig. 1 Single Joint: 20 @ 2000 rpm
Fig. 2 Double Joint: 40 @ 2000 rpm
Torque Ratings:
For static conditions with in-line loading.
Angular relationship between tapped

holes may vary freely.
These joints may be made into
telescoping units by mating them
with telescoping miniature ball
splines on pages 4-22 & 4-23.
Fig. 1 Single Joint

D
L
F
B O.D.
8
Fig. 2 Double Joint
INCH COMPONENT
Catalog Number
Fig. 1 Single Joint
S57PY4-SFU0312
S57PY4-SFU0415
S57PY4-SFU0622
S57PY4-SFU0830
Fig. 2 Double Joint
S57PY4-DFU0312
S57PY4-DFU0415
S57PY4-DFU0622
S57PY4-DFU0830
Max.
B
C
E
D
F
Set Torque
L
Bore
O.D. Bore
End
Flange
+.001
Center Length Dia. Screws @ 0
-.000 Depth Unit
ozf in.
3/8
1/2
3/4
1
.1875
.250
.375
.500
3/8
3/4
7/16 13/16
5/8
1
7/8 1-5/16
3/8
1/2
3/4
1
.1875
.250
.375
.500
3/8
3/4
5/8
7/16 13/16 25/32
5/8
1
7/8
7/8 1-5/16 1-1/4
Max.
Oper. Max.
Speed Angle
@ 0 Degrees
10
rpm
1-1/2
1-5/8
2
2-5/8
3/4
15/16
1-3/8
1-7/8
*
*
1/4-20
1/4-20
256
320
480
1200
4000
4000
4000
4000
20
20
20
20
2-1/8
2-13/32
2-7/8
3-7/8
3/4
15/16
1-3/8
1-7/8
*
*
1/4-20
1/4-20
256
320
480
1200
4000
4000
4000
4000
40
40
40
40
* Set screws available on special order.

4800 ozf in. torque rating available on special order.
Split hub ends and other bores also available on special order.
11
12
13
14
15
7-5
16
I
R
UNIVERSAL JOINTS SINGLE JOINT

SHORT SERIES
STEP-DOWN SERIES
Inch
MATERIAL:
303 Stainless Steel
1
2
L
L/2
1/2 B
8
9
10
11
12
13
Fig. 2
Step-Down Series
INCH COMPONENT
Fig. 1 Short Series - Solid

A 5Y 8-DM06
A 5Y 8-DM08
A 5Y 8-DM10
A 5Y 8-DM12
Fig. 1 Short Series - Bored
A 5Y 8-DM0606
A 5Y 8-DM0608
A 5Y 8-DM0810
A 5Y 8-DM1012
A 5Y 8-DM1014
A 5Y 8-DM1216
Catalog Number
Fig. 2 Step-Down Series
A 5Y 8-DU104
A 5Y 8-DU206
A 5Y 8-DU308
O.D.
B
Bore
1/2
5/8
25/32
63/64
1/2
1/2
5/8
25/32
25/32
63/64
B
Bore
+.001
-.000
.125
.1875
.250
C
Bore Depth
1/32
L
Overall
Length
Max.
Torque
1.58
1.96
2.20
2.80
113
217
434
694
.06
.15
.28
.50
3/16
1/4
5/16
3/8
7/16
1/2
33/64
33/64
21/32
43/64
43/64
55/64
1.58
1.58
1.96
2.20
2.20
2.80
113
113
217
434
434
694
.04
.04
.13
.20
.20
.40
+.001
-.000
15
7-6
lbf in.
Approx.
Weight
lb.
C
Dia.
Set
Screw
Sub Drill
5/16
3/8
1/2
.312
.312
#2-56
#4-40
#6-32
.029
.040
.070
NOTE: Universal Joints will operate at angles up to 30.
14
16
SUB DRILL
Catalog Number
Fig. 1
Short Series
SET
SCREW
11/16
5/32
B O.D.
1-3/8
D
(TYP)

STANDARD DESIGN
MATERIAL:
Alloy Steel
Inch
SPECIFICATIONS:
Max. Working Angle - Power Driven Applications: 25

Hand Rotation Applications: 45
Rating - Multiply design torque by correction factor obtained

from following tables. Resulting number must be

smaller than the breaking torque of the joint used.
1
2
Intermittent Running Conditions
Speed
rpm
Angle of Operation - Degrees

3 5
7 10 15 20 25
9
20 34 45
1800
8
16 28 39
1500
7
13 22 32 40
1200
6
11 16 23 34
900
5
8 11 15 22 34
600
4
5
7
8 11 16
300
3
4
4
5
6
8
100
Running under load for less than 15 minutes.
40
22
9
28
11
30
34
12
C
B
O.D.
Angle of Operation - Degrees

3
5
7 10 15 20 25
18 40 68 90
1800
16 32 55 78
1500
14 26 44 64 80
1200
12 21 32 46 68
900
10 15 22 30 44 68 80
600
8 10 14 16 22 32 44
300
6
7
8 10 12 15 18
100
Running under load from 15 minutes to 8 hours.
55
22
30
68
24
7
8
INCH COMPONENT
Catalog Number
O.D.
Solid
Bored
Continuous Running Conditions
Speed
rpm
B
Bore
+.001
-.000
C
Bore
Depth
1/32
L
Overall
Length
Static
Breaking
Torque
Approx.
Weight
lb.
lbf in.
A
A
A
A
A
5Q
5Q
5Q
5Q
5Q
8-D100
8-D200
8-D300
8-D400
8-D500
3/8
1/2
5/8
3/4
7/8
7/8
1
1-1/8
1-11/32
1-1/2
1-3/4
2
2-1/4
2-11/16
3
110
378
540
768
1176
.05
.10
.17
.30
.45
A
A
A
A
A
A
A
A
A
A
A
A
A
A
5Q
5Q
5Q
5Q
5Q
5Q
5Q
5Q
5Q
5Q
5Q
5Q
5Q
5Q
8-D106
8-D108
8-D208
8-D210
8-D212
8-D310
8-D312
8-D314
8-D316
8-D412
8-D414
8-D416
8-D514
8-D516
3/8
3/8
1/2
1/2
1/2
5/8
5/8
5/8
5/8
3/4
3/4
3/4
7/8
7/8
.1875
.250
.250
.3125
.375
.3125
.375
.4375
.500
.375
.4375
.500
.4375
.500
9/16
9/16
5/8
5/8
5/8
11/16
11/16
11/16
11/16
7/8
7/8
7/8
7/8
7/8
7/8
7/8
1
1
1
1-1/8
1-1/8
1-1/8
1-1/8
1-11/32
1-11/32
1-11/32
1-1/2
1-1/2
1-3/4
1-3/4
2
2
2
2-1/4
2-1/4
2-1/4
2-1/4
2-11/16
2-11/16
2-11/16
3
3
110
110
378
378
378
540
540
540
540
768
768
768
1176
1176
.04
.04
.08
.08
.08
.15
.15
.15
.15
.25
.25
.25
.37
.37
7-7
9
10
11
12
13
14
15
16

MATERIAL:
Alloy Steel
Inch
T
L
L/2
2
3
4
B O.D.
INCH COMPONENT
O.D.
B
Bore
+.001
-.000
C
Bore
Depth
L
Overall
Length
Approx.
Weight
8-DM06
8-DM08
8-DM10
8-DM12
15/32
5/8
25/32
15/16
1-31/32
2-13/64
2-43/64
3-5/16
1.5
2.8
5.0
9.0
8-DM0606
8-DM0608
8-DM0810
8-DM1012
8-DM1014
8-DM1216
15/32
15/32
5/8
25/32
25/32
15/16
3/16
1/4
5/16
3/8
7/16
1/2
41/64
41/64
11/16
27/32
27/32
1-1/16
1-31/32
1-31/32
2-13/64
2-43/64
2-43/64
3-5/16
1.0
1.0
2.3
4.4
4.4
7.1
Catalog Number
A
A
A
A
Solid
Bored
A
A
A
A
A
A
5Q
5Q
5Q
5Q
5Q
5Q
5Q
5Q
5Q
5Q
oz.
8
9
10
HAND-OPERATED
250 rpm OR LESS
MATERIAL:
Die Cast Zinc

L
L/2
11
B O.D.
12
C
13
INCH COMPONENT
Catalog Number
14
15
16
O.D.
B
Bore
C
Bore
Depth
L
Overall
Length
9/16
9/16
13/16
13/16
1/4
5/16
3/8
1/2
9/16
9/16
7/8
7/8
1-15/16
1-15/16
2-7/8
2-7/8
Bored
A
A
A
A
5D
5D
5D
5D
7-8
8-D008
8-D010
8-D012
8-D016
UNIVERSAL JOINTS
TELESCOPING UNIVERSAL JOINTS
HEAT-RESISTANT
CORROSION-RESISTANT
Inch
MATERIAL:
Joints - 303 Series Stainless Steel

Spline - 416 Stainless Steel
E
(TYP)
0F to +750F
C
IN CLOSED POSITION
D
SPLINE
MAX.
B O.D.
M
INCH COMPONENT
Catalog Number
A
A
A
A
A
5X
5X
5X
5X
5X
8-SE1608
8-SE2012
8-SE2514
8-SE3216
8-SE3220
O.D.
1/2
5/8
25/32
1
1
B
Bore
+.001
-.000
.2500
.3750
.4375
.5000
.6250
S
L
IN CLOSED POSITION
.79
.98
1.10
1.40
1.40
3.83
4.96
5.95
7.30
7.30
1.58
1.96
2.20
2.80
2.80
Max.
L
C
D
Closed Closed Max. Torque
lbf. in.
5.41
6.92
8.15
10.10
10.10
3.83
4.96
5.95
7.30
7.30
1-5/8
2-1/4
2-7/8
3-1/4
3-1/4
40
95
240
600
600
2-1/4
3
3-3/4
4-1/2
4-1/2
33/64
21/32
43/64
55/64
55/64
4
5
6
UNIVERSAL JOINTS
DOUBLE JOINT
HAND-OPERATED & POWER DRIVEN
1750 rpm OR LESS
MATERIAL:
Alloy Steel
E
C
E
C
B
O.D.
Solid
Bored
10
INCH COMPONENT
Catalog Number
O.D.
B
Bore
+.001
-.000
C
Bore
Depth
Approx.
Weight
1/32
L
Overall
Length
11
lb.
A
A
A
A
A
A
5Q
5Q
5Q
5Q
5Q
5Q
8-DD100
8-DD200
8-DD300
8-DD400
8-DD500
8-DD600
3/8
1/2
5/8
3/4
7/8
1
3-1/2
4
4-1/2
5-3/8
6
6-3/4
7/8
1
1-1/8
1-11/32
1-1/2
1-11/16
1-3/4
2
2-1/4
2-11/16
3
3-3/8
.09
.18
.32
.55
.82
1.20
A
A
A
A
A
A
5Q
5Q
5Q
5Q
5Q
5Q
8-DD106
8-DD208
8-DD310
8-DD412
8-DD514
8-DD616
3/8
1/2
5/8
3/4
7/8
1
.1875
.2500
.3125
.3750
.4375
.5000
9/16
5/8
11/16
7/8
7/8
1
3-1/2
4
4-1/2
5-3/8
6
6-3/4
7/8
1
1-1/8
1-11/32
1-1/2
1-11/16
1-3/4
2
2-1/4
2-11/16
3
3-3/8
.08
.16
.30
.50
.74
1.05
7-9
12
13
14
15
16
I
R
T
1
TELESCOPING MINIATURE UNIVERSAL JOINTS

DOUBLE UNIVERSAL WITH BALL SPLINE
ZERO BACKLASH
LOW INERTIA

MATERIAL:
Inch
Body - Fig. 1: 303 Stainless Steel

Fig. 2: 440 Stainless Steel
Balls - Fig. 1 & 2: 440 Stainless Steel
Ends and Flanges - Fig. 2: 300 Series Stainless Steel
Precision
Component
LUBRICATION:
Dry film plus oil suspension
FEATURES:
3
4
5
6
7
Zero backlash is attained with patented design

and close dimensional control of components.
Use where axial motion is present while
transmitting rotary motion.
SPECIFICATIONS:
Torque Ratings: For static conditions with in-line loading

Max. Operating Speed @ 0 - Fig. 1: 10000 rpm

Fig. 2: 4000 rpm
Max. Angle - Fig. 1: 60 @ 4000 rpm

Fig. 2: 40 @ 1800 rpm
O.D. B
*L (CLOSED)
E
1/4
*F
Angular relationship between tapped holes,

where applicable, may vary freely.
Also available on special order:
Travel of up to 4 in. on Fig. 1 units and
6 in. on Fig. 2 units, telescoping single joints,
split hub ends and other bores.
Fig. 1
*L (CLOSED)
E
*F
1/4
D
O.D. B
9
Fig. 2
10
11
12
13
14
INCH COMPONENT
Catalog Number
Fig. 1
S57PY5-DUT0306
S57PY5-DUT0406
S57PY5-DUT0609
S57PY5-DUT0812
Fig. 2
S57PY4-DFUT0312
S57PY4-DFUT0415
S57PY4-DFUT0622
S57PY4-DFUT0830
16
B
Bore
3/16
3/16
9/32
3/8
.0938
.1250
.1875
.2500
3/16
3/16
9/32
3/8
3/8
3/8
9/16
3/4
3/4
3/4
15/16
1-1/4
1-1/2
1-1/2
2-1/16
2-3/4
.31
.31
.41
.56
3/8
1/2
3/4
1
.1875
.2500
.3750
.5000
3/8
7/16
5/8
7/8
3/4
3/4
1
1-5/16
1-1/4
1-5/8
2-1/4
2-1/2
2-3/4
3
4-1/4
5-1/8
3/4
15/16
1-3/8
1-7/8
1/4-20
1/4-20
+.001
-.000
C
E
Bore End
Depth Unit
* Closed dimensions for standard 1/4 of travel.

Set screws available on special order.
4800 ozf in. torque rating available on special order.
15
7-10
F*
Max.
G
D
Center
L
Dia. Over Screw Torque
Flange
Unit (Closed)
@ 0
Size
Ball
Dia.
(Closed)
ozf in.
Race
O.D.
16
16
64
256
256
320
480
1200
MOLDED UNIVERSAL JOINTS

Stock Drive Products pioneered the concept of combining the exceptional qualities of selected
plastic materials with different metals to create products which incorporate both.
SUPER-PLAST designs have the following advantages:
1. Inexpensive replacement of metal components, particularly for low torque applications.
2. As vibration dampers due to the resiliency of plastics used.
3. For drives used in corrosive environments or for chemical processing equipment.
4. For drives which have to be electrically insulated.
5. For domestic appliances and other intermittent duty applications.
Inch
The SDP line of molded universal joints is a valuable extension of the above capabilities, and they are
shown on the following pages:
Name
Description
Series
Page
Universal Single Joint
All Molded
Metal Spider (No Insert)
Metal Spider and Insert
A 5M 8-D
A 5T 8-D
A 5Z 8-D
7-12
7-13
7-13
Universal Double Joint
All Molded
A 5M 8-DD
A 5T 8-DD
A 5Z 8-DD
7-12
7-14
7-14
Universal Joint With Molded

Slide Extension
All Molded
A 5M 8-SE
A 5T 8-SE
A 5Z 8-SE
7-15
7-16, 7-17
7-16, 7-17
Universal Joint With Brass

Slide Extension
A 5Z 8-SEB
7-18
The above products are available from stock in standard configurations as presented in the catalog pages.
They can also be manufactured to special requirements, with partial modification of existing tools.
These specials can consist of:
a)
b)
c)
d)
Bores molded to accommodate square, D shape or hexagonal shafts.

Shafts molded into the components themselves.
Zero backlash or components with built-in backlash.
Gears, pulleys or other components molded or assembled to couplings or universal joints.
Please consult SDP Application Engineering for further details.
10
11
12
13
14
15
7-11
16
I
R

ECONOMY SERIES
Inch
MATERIAL:
Body & Spider - Molded Acetal

180F
1
2
SPECIFICATIONS:
Max. Angular Displacement - Fig. 1: 45

Fig. 2: 90
3
4
MOLDED SPIDER
C
L
O.D.
MOLDED SPIDER
Fig. 1 Single Joint
6
7
8
9
10
11
12
13
Fig. 2 Double Joint
INCH COMPONENT
Catalog Number
Fig. 1 Single Joint
A 5M 8-D204
A 5M 8-D206
A 5M 8-D306
A 5M 8-D308
A 5M 8-D406
A 5M 8-D408
A 5M 8-D410
A 5M 8-D508
A 5M 8-D510
A 5M 8-D512
A 5M 8-D514
Fig. 2 Double Joint
A 5M 8-DD204
A 5M 8-DD206
A 5M 8-DD306
A 5M 8-DD308
A 5M 8-DD406
A 5M 8-DD408
A 5M 8-DD410
A 5M 8-DD508
A 5M 8-DD510
A 5M 8-DD512
A 5M 8-DD514
14
15
16
F
L
O.D.
7-12
O.D.
B
Bore
+.000
-.002
Bore
Depth
(Typ)
L
Overall
Length
1/4
1/4
3/8
3/8
1/2
1/2
1/2
5/8
5/8
5/8
5/8
1/8
3/16
3/16
1/4
3/16
1/4
5/16
1/4
5/16
3/8
7/16
.23
.23
.34
.34
.42
.42
.42
.58
.58
.58
.58
3/4
3/4
1-1/8
1-1/8
1-25/64
1-25/64
1-25/64
2-5/64
2-5/64
2-5/64
2-5/64
.26
.26
.42
.42
.54
.54
.54
.65
.65
.65
.65
1.9
1.9
8.0
8.0
18.0
18.0
18.0
37.0
37.0
37.0
37.0
1/4
1/4
3/8
3/8
1/2
1/2
1/2
5/8
5/8
5/8
5/8
1/8
3/16
3/16
1/4
3/16
1/4
5/16
1/4
5/16
3/8
7/16
.23
.23
.34
.34
.42
.42
.42
.58
.58
.58
.58
1-1/16
1-1/16
1-41/64
1-41/64
2-1/64
2-1/64
2-1/64
2-61/64
2-61/64
2-61/64
2-61/64
.26
.26
.42
.42
.54
.54
.54
.65
.65
.65
.65
5/16
5/16
17/32
17/32
5/8
5/8
5/8
7/8
7/8
7/8
7/8
1.7
1.7
6.0
6.0
11.0
11.0
11.0
32.0
32.0
32.0
32.0
.22
.22
.36
.36
.43
.43
.43
.61
.61
.61
.61
Max.
Max.
Torque Parallel
lbf in.
Offset
MOLDED UNIVERSAL JOINTS SINGLE JOINT

ELECTRICALLY INSULATING
MATERIAL:
Inch
Body - Molded Acetal

Spider & Insert - Nickel Plated Brass
180F
SPECIFICATIONS:
Max. Angular Displacement: 45
B Bore Tolerance:
Fig. 1 Plain: +.000/-.002
Fig. 2 With Insert: +.001/-.000
* 2 SET SCREWS EACH END

SPIDER
SPIDER
B
O.D.
INSERT
L
O.D.
Fig. 1 Plain
Fig. 2 With Insert
INCH COMPONENT
Catalog Number
Fig. 1 Plain
A 5T 8-D204
A 5T 8-D206
A 5T 8-D306
A 5T 8-D308
A 5T 8-D406
A 5T 8-D408
A 5T 8-D410
A 5T 8-D508
A 5T 8-D510
A 5T 8-D512
A 5T 8-D514
Fig. 2 With Insert
A 5Z 8-D204
A 5Z 8-D304
A 5Z 8-D306
A 5Z 8-D406
A 5Z 8-D408
A 5Z 8-D508
A 5Z 8-D510
A 5Z 8-D512
O.D.
B
Bore
Bore
Depth
(Typ)
L
Overall
Length
Set
Screw
1/4
1/4
3/8
3/8
1/2
1/2
1/2
5/8
5/8
5/8
5/8
1/8
3/16
3/16
1/4
3/16
1/4
5/16
1/4
5/16
3/8
7/16
.23
.23
.34
.34
.42
.42
.42
.58
.58
.58
.58
3/4
3/4
1-1/8
1-1/8
1-25/64
1-25/64
1-25/64
2-5/64
2-5/64
2-5/64
2-5/64
.27
.27
.41
.41
.54
.54
.54
.68
.68
.68
.68
5
5
16
16
26
26
26
60
60
60
60
1/4
3/8
3/8
1/2
1/2
5/8
5/8
5/8
* 1/8
* 1/8
3/16
3/16
1/4
1/4
5/16
3/8
.39
.52
.52
.63
.63
.86
.86
.86
1-3/64
1-31/64
1-31/64
1-13/16
1-13/16
2-41/64
2-41/64
2-41/64
.27
.41
.41
.54
.54
.68
.68
.68
#4-40
#4-40
#4-40
#6-32
#6-32
#8-32
#8-32
#8-32
5
16
16
26
26
60
60
60
Max.
Torque
lbf in.
* One set screw each end.
7
8
9
10
11
12
13
14
15
7-13
16
MOLDED UNIVERSAL JOINTS DOUBLE JOINT

R
T
MATERIAL:
Inch


180F
SPECIFICATIONS:
B Bore Tolerance:
Fig. 1 Plain: +.000/-.002
SPIDERS
3
B
F
L
O.D.
Fig. 1 Plain
INSERT
* 2 SET SCREWS
EACH END
SPIDERS
F
L
O.D.
Fig. 2 With Insert
8
INCH COMPONENT
9
10
11
12
13
14
15
Catalog Number
Fig. 1 Plain
A 5T 8-DD204
A 5T 8-DD206
A 5T 8-DD306
A 5T 8-DD308
A 5T 8-DD406
A 5T 8-DD408
A 5T 8-DD410
A 5T 8-DD508
A 5T 8-DD510
A 5T 8-DD512
A 5T 8-DD514
Fig. 2 With Insert
A 5Z 8-DD204
A 5Z 8-DD304
A 5Z 8-DD306
A 5Z 8-DD406
A 5Z 8-DD408
A 5Z 8-DD508
A 5Z 8-DD510
A 5Z 8-DD512
16
7-14
L
Bore
Depth Overall
(Typ) Length
O.D.
B
Bore
1/4
1/4
3/8
3/8
1/2
1/2
1/2
5/8
5/8
5/8
5/8
1/8
3/16
3/16
1/4
3/16
1/4
5/16
1/4
5/16
3/8
7/16
.23
.23
.34
.34
.42
.42
.42
.58
.58
.58
.58
1/4
3/8
3/8
1/2
1/2
5/8
5/8
5/8
* 1/8
* 1/8
3/16
3/16
1/4
1/4
5/16
3/8
.39
.52
.52
.63
.63
.86
.86
.86
Max. Max.
Set
Parallel
Screw Torque
lbf in.
Offset
1-1/16
1-1/16
1-41/64
1-41/64
2-1/64
2-1/64
2-1/64
2-61/64
2-61/64
2-61/64
2-61/64
.27
.27
.41
.41
.54
.54
.54
.68
.68
.68
.68
5/16
5/16
17/32
17/32
5/8
5/8
5/8
7/8
7/8
7/8
7/8
2.5
2.5
7.0
7.0
12.0
12.0
12.0
47.0
47.0
47.0
47.0
.22
.22
.36
.36
.43
.43
.43
.61
.61
.61
.61
1-23/64
2
2
2-7/16
2-7/16
3-33/64
3-33/64
3-33/64
.27
.41
.41
.54
.54
.68
.68
.68
5/16
17/32
17/32
5/8
5/8
7/8
7/8
7/8
#4-40
#4-40
#4-40
#6-32
#6-32
#8-32
#8-32
#8-32
2.5
7.0
7.0
12.0
12.0
47.0
47.0
47.0
.22
.36
.36
.43
.43
.61
.61
.61

WITH MOLDED SLIDE EXTENSION
ECONOMY SERIES
R
Inch
MATERIAL:
Body & Spider - Molded Acetal
180F
SPECIFICATIONS:

* Max. Recommended Extension: 3/4
2
.56
(TYP)
.42
2-59/64 (IN CLOSED POSITION)

1-1/8
MOLDED
SPIDERS
B
1-35/64
3/8
3/16
SQ.
23/64
2-1/2
Fig. 1
.70
(TYP)
.54

1-1/8
3/8
MOLDED
SPIDERS
B
1-25/64
(TYP)
1/2
3/16
SQ.
6
7
23/64
2-23/64
Fig. 2
INCH COMPONENT
B
Bore
+.000
-.002
Bore
Depth
(Typ)
A 5M 8-SE306
A 5M 8-SE308
3/16
1/4
A 5M 8-SE406
A 5M 8-SE408
A 5M 8-SE410
3/16
1/4
5/16
Catalog Number
Max. Recommended Torque

lbf in.
Closed
Open*
.34
.34
6
6
5
5
.42
.42
.42
12
12
12
10
10
10
Fig. 1
Fig. 2
9
10
11
12
13
14
15
7-15
16
I
R
T
1
2
3

PLAIN OR WITH INSERT
3/8 O.D.
Inch
MATERIAL:


180F
SPECIFICATIONS:

Max. Recommended Extension: 3/4
B Bore Tolerance:
Fig. 1 Plain: +.000/-.002
.41
B
1-35/64
3/8
.74
.41
3/16
SQ.
1-47/64
SPIDERS
23/64
2-43/64

* 2 SET SCREWS
EACH END
Fig. 2 With Insert
INCH COMPONENT
Catalog Number
Fig. 1 Plain
A 5T 8-SE306
A 5T 8-SE308
Fig. 2 With Insert
A 5Z 8-SE304
A 5Z 8-SE306
14
15
16

1-1/8
B
3/8
13
23/64
2-1/2
Fig. 1 Plain
12
3/16
SQ.
11
SPIDERS

1-1/8
.56
10
7-16
B
Bore
Bore
Depth
(Typ)
Set
Screw
3/16
1/4
.34
.34
*1/8
3/16
.52
.52

lbf in.
Closed
Open
8
8
5
5
#4-40
#4-40
8
8
5
5

PLAIN OR WITH INSERT
1/2 O.D.
R
Inch
MATERIAL:

180F
SPECIFICATIONS:

Max. Recommended Extension: 3/4 in.
B Bore Tolerance:
Fig. 1 Plain: +.000/-.002
3
.70

1-1/8
3/8
(TYP)
.54
SPIDERS
B
3/16
1-25/64
Fig. 1 Plain
.91

1-1/8
3/8
(TYP)
.54
SPIDERS
B
3/16
1/2
(TYP)
2 SET SCREWS
EACH END
2-9/16
Fig. 2 With Insert
INCH COMPONENT
Fig. 1 Plain
A 5T 8-SE406
A 5T 8-SE408
A 5T 8-SE410
Fig. 2 With Insert
A 5Z 8-SE406
A 5Z 8-SE408
B
Bore
Bore
Depth
(Typ)
Set
Screw
3/16
1/4
5/16
.42
.42
.42
3/16
1/4
.63
.63
7
8
23/64
SQ.
1-39/64
4
5
23/64
2-23/64
SQ.
(TYP)
1/2
Catalog Number
10
lbf in.
Closed
Open
14
14
14
10
10
10
#6-32
#6-32
14
14
10
10
11
12
13
14
15
7-17
16
I
R
MOLDED UNIVERSAL JOINTS TELESCOPING

WITH BRASS SLIDE EXTENSION
Inch
MATERIAL:
T
1
2
3

Tube - Brass

180F
SPECIFICATIONS:

Max. Recommended Extension: D/2
2 SET SCREWS
EACH END
Shorter or longer lengths available on

special order.
E
(TYP)
7
8
9
10
11
12
BRASS
SPIDERS
T (SQ. BRASS TUBE)
O.D.
N (TYP)
D
L (IN CLOSED POSITION)
INCH COMPONENT
Catalog Number
A 5Z 8-SEB204
A 5Z 8-SEB304
A 5Z 8-SEB306
A 5Z 8-SEB406
A 5Z 8-SEB408
A 5Z 8-SEB508
A 5Z 8-SEB510
A 5Z 8-SEB512
Catalog Number
(Ref.)
A 5Z 8-SEB204
A 5Z 8-SEB304
A 5Z 8-SEB306
A 5Z 8-SEB406
A 5Z 8-SEB408
A 5Z 8-SEB508
A 5Z 8-SEB510
A 5Z 8-SEB512
13
14
15
16
C (IN CLOSED POSITION)
5
6
7-18
O.D.
1/4
3/8
3/8
1/2
1/2
5/8
5/8
5/8
B
Bore
+.001
-.000
* 1/8
* 1/8
3/16
3/16
1/4
1/4
5/16
3/8
Length Closed
L
3-1/4
4-7/16
4-7/16
6
6
8
8
8
2-3/16
2-15/16
2-15/16
4-3/16
4-3/16
5-11/32
5-11/32
5-11/32
Bore
Depth
(Typ)
.39
.52
.52
.63
.63
.86
.86
.86
17/32
3/4
3/4
29/32
29/32
1-21/64
1-21/64
1-21/64
.27
.41
.41
.54
.54
.68
.68
.68
29/32
1-5/16
1-5/16
1-39/64
1-39/64
2-3/8
2-3/8
2-3/8
T
Square
Set
Screw
1-7/16
1-13/16
1-13/16
2-25/32
2-25/32
3-1/4
3-1/4
3-1/4
1-19/32
2-3/32
2-3/32
3-3/32
3-3/32
3-25/32
3-25/32
3-25/32
1/8
5/32
5/32
3/16
3/16
1/4
1/4
1/4
#4-40
#4-40
#4-40
#6-32
#6-32
#8-32
#8-32
#8-32
8 - VIBRATION AND SHOCK MOUNTS

R
Inch
Flanged Silicone Gel Vibration

Dampers
pg. 8-6
Double-Studded Silicone Gel Vibration Dampers

pg. 8-7
T
1
2
3
Silicone Gel Sheets

pg. 8-9
Silicone Gel Tape & Chips

pg. 8-10
4
5
Silicone Foam Sheets
pg. 8-11
Square Mountings to 13.8 lbf

pg. 8-12
Square Mountings to 15.4 lbf

pg. 8-13
6
7
8
Cylindrical / Square Mountings to

14.5 lbf
pg. 8-14
Ring Mountings to 20 lbf

pg. 8-15
Cylindrical Mountings to 13.3 lbf

pg. 8-16
9
10
Cylindrical Mountings to 25 lbf

pg. 8-17
Cylindrical Mountings to 28.5 lbf

pg. 8-18

pg. 8-19
11
12
13

pg. 8-20

pg. 8-21

pg. 8-22
14
15
8-1
pg. 8-23

pg. 8-24

pg. 8-25
16

R
Inch
T
1

pg. 8-26

pg. 8-27

pg. 8-28

pg. 8-29
Conical Bumpers
pg. 8-30

Neoprene pg. 8-31

Neoprene
pg. 8-32

Urethane pg. 8-33

Urethane pg. 8-34
Platemounts to 20 lbf
Square or Diamond pg. 8-35

pg. 8-39
Solo Unitized Center Bolt Mounts

pg. 8-40
Tandem Unitized Center Bolt Mounts

pg. 8-41
Finger-Flex Assemblies to 37 lbf

pg. 8-43
Finger-Flex Assemblies to 50 lbf

pg. 8-44
Finger-Flex Mountings to 25 lbf

pg. 8-46

pg. 8-47
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
8-2
pg. 8-45

R
Inch

pg. 8-48

pg. 8-49

pg. 8-50
T
1
2
3
Base Mountings to 10 lbf

pg. 8-51
ENDUR-C Base Mountings to 75 lbf

pg. 8-52
ENDUR-C Base Mountings to 200 lbf

pg. 8-53
4
5
Base Mountings to 242 lbf

pg. 8-54
Steel Spring & Pad Mounts to 4.4 lbf

pg. 8-55
Compression Base Mountings to

1000 lbf
pg. 8-56
6
7
8
Heavy-Duty Base Mountings

General Purpose
pg. 8-57
Heavy-Duty Base Mountings to

20000 lbf
pg. 8-58
Square Suspension Mounts

Square Plate
pg. 8-59
9
10
Spring Suspension Mounts

Pedestal pg. 8-60
Spring Suspension Mounts

Single Hole
pg. 8-61
Elliptic Leaf Spring Mounts

Nato Approved X pg. 8-62
11
12
13
Elliptic Leaf Spring Mounts

Nato Approved XM pg. 8-62
Elliptic Leaf Spring Mounts, Nato

Approved X, Lightweight pg. 8-65
Damped Spring Mountings to 200 lbf

pg. 8-67
14
15
8-3
pg. 8-68

pg. 8-70

pg. 8-71
16

R
Inch
T
1
Safety Channel Mountings to 52 lbf/in.

pg. 8-72
Safety Channel Mountings to 90 lbf

pg. 8-73
Safety Channel Mountings to 95 lbf

pg. 8-74
Rectangular Mountings to 1475 lbf

pg. 8-75
Heavy-Duty Rubber Compression

Springs to 7000 lbf
pg. 8-76
Rectangular Rubber Bumpers to

4700 lbf
pg. 8-77
Rectangular Rubber Bumpers to

1200 lbf
pg. 8-77
Rectangular Base Mounts to 4000 lbf

pg. 8-78
Diamond Base Mounts to 1100 lbf

pgs. 8-80 & 8-81
Leveling Base Mountings to 10000 lbf

pg. 8-84
Leveling Base Mountings to 12000 lbf

pg. 8-86
Iso-Pad Mounts to 4000 lbf

pg. 8-87
Iso-Pads to 100 psi

pg. 8-88
Iso-Pad Sheets Unpatterned

pg. 8-89
Iso-Pad Sheets Patterned

pg. 8-89
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
8-4
Iso-Pads to 120 psi
pg. 8-90
ADVANTAGES OF SILICONE VS. RUBBER

Figure 1: REBOUND RESILIENCE

70
Inch
No matter what the temperature could be, Silicone Gel

performs more stably than other materials.
REBOUND RESILIENCE %
60
T
1
50
2
A10Z61 and A10Z62 Series Silicone
Urethane High Damping Rubber
NBR (Rubber)
Natural Rubber
40
30
3
4
20
10
0
-100
(-148)
-50
(-58)
0
(+32)
50
(+122)
100
(+212)
150
(+302)
TEMPERATURE C (F)
7
Figure 2: COMPRESSION SET
70
Outstanding restoration is available even when Silicone Gel

stays compressed.
9
60
1. Compress above materials by 25% and leave

compressed for 22 hours in 70C (158 F).
2. Release compression and leave in normal
temperature for 30 minutes.
COMPRESSION SET %
50
10
11
40
30
12
20
13
10
0
A10Z61
and
A10Z62
Series
Silicone
Urethane
High
Damping
Rubber
NBR
(Rubber)
14
Natural
Rubber
15
8-5
16
FLANGED SILICONE GEL VIBRATION DAMPERS

TO BE USED IN COMPRESSION ONLY
FOR SMALL TO INTERMEDIATE LOAD APPLICATIONS
DAMPS LOW FREQUENCY VIBRATION
Inch
CAN BE USED WHEN SPACE IS LIMITED
MATERIAL:
Stud - Stainless Steel

Body - Silicone Gel
Flange Plate - Stainless Steel
-40F to +392F
2.36
1.18
1.81
1.42
#10-32
SLOTTED
2-.17x.24
LONG HOLE
.75
60
.87
2-R.24
5
6
.94
INCH COMPONENT
Catalog Number
Optimum
Load
A10Z64-SF02
A10Z64-SF05
A10Z64-SF10
2.8 to 7.2
7.2 to 16.5
16.5 to 27.6
lbf/leg
8
TYPICAL CHARACTERISTICS OF THE SILICONE MOUNTS
(Example Shown: A10Z64-MN05)
100
10
12
13
Silicone Dampers
10
TRANSMISSIBILITY
11
31.7
3.17
Load: 44.1 lbf/ 4 Legs

Vibration Level: 0.2G
Silicone
Dampers
Rubber
Dampers
Resonance Point
Resonance Magnification
9.5 Hz
6.5 dB
19.8 Hz
8.8 dB
Damping Rubber
1
0.315
0.1
0.0315
14
0.01
20
40
60
FREQUENCY (Hz)
15
16
8-6
80
100
DOUBLE-STUDDED SILICONE GEL VIBRATION DAMPERS

TO BE USED IN COMPRESSION ONLY
FOR SMALL TO INTERMEDIATE LOAD APPLICATIONS
DAMPS LOW FREQUENCY
Inch
MATERIAL:
0
1
Studs - Stainless Steel
Body - Silicone Gel
See application page
for proper usage.
.79
#10-32
.47
#6-32
#10-32
1.1
.75
.75
.50
INCH COMPONENT
A10Z64-THB
A10Z64-THA
A10Z64-THC
A10Z64-THTW
1
1
2
3
.71
.98
1.38
Fig. 1
Fig. 2
Fig. 3
Optimum
Load
Resonance
Point
.9 to 1.3
1.1 to 1.8
.8 to 2
27.6 to 55.1
13 to 11
16 to 15
14 to 12
10 to 8
lbf/leg
MATERIAL:
Catalog Number
Hz
Recommended
Resonance
Frequency
Magnification
dB
Hz
13 to 12
12
13 to 12
20 to 19
18 ~
23 ~
20 ~
from 14
6
h
.71
.51
.71
.98
.75
10
-40F to +392F
.87
See application page

for proper usage.
11
12
.94
1.18
INCH COMPONENT
A10Z64-MN03
** A10Z64-MN05
A10Z64-MN07
A10Z64-MN10
#10-32
Studs - Stainless Steel

Body - Silicone Gel
Catalog Number *
T
1
-40F to +392F
Fig.
No.
Optimum
Load
Resonance
Point
Resonance
Magnification
Recommended
Frequency
4.4 to 7.7
7.7 to 12.1
12.1 to 18.1
18.7 to 27.6
12 to 10
11 to 10
11 to 10
11 to 10
12
14 to 13
16 to 15
20 to 18
17 ~
16 ~
16 ~
16 ~
lbf/leg
Hz
dB
Hz
* This type is slotted on the stud for fixing a bolt.

** See the previous page for Transmissibility Chart.
8-7
13
14
15
16
ADVANTAGES OF SILICONE VS. RUBBER

FEATURES:
R
T
1

Highest damping effect arises when gel is
compressed 10% up to 30%.
Low in temperature dependency, this material
Inch
offers stable performance from -40F to 392F (-40C to +200C)
0
1
Excellent chemical resistance.
Low in compression set.
Performance stays the same even after
repeated use.
Contains nothing harmful. Environment-friendly.
RIGHT USE:
2
3
1. EVEN LOAD
INSTALLED SURFACE
4
5
6
7
2. HANG IN COMPRESSIVE DIRECTION
8
WRONG USE:
9
10
11
3. TWIST
1. UNEVEN LOAD
12
4. TENSILE
DIRECTION
13
14
2. BOLT HOLE OUT OF CENTER
15
16
8-8
5. SHEARING
DIRECTION
SILICONE GEL SHEETS

LOW RESONANCE MAGNIFICATION
OZONE, UV AND CHEMICAL RESISTANT
SHOCK ABSORBER
REDUCES NOISE
R
Inch
MATERIAL:
Silicone Gel
INSTALLATION:
BOARD
SUBJECT
2
GEL SHEET
.354
Divide for light load. Add for heavy load.

Make sure of total subject load and then
select optimum gel sheet.
.394
3
4
Example:
For .66 lbf load, add a board for extra weight
or divide A10Z62-SN02 to reduce projections.
3.94
For 22.1 lbf load, divide A10Z62-SN15 into pieces.

For 176.4 lbf load, use two of A10Z62-SN50 and
divide if needed.
6
.08
7
.197
3.94
8
INCH COMPONENT
Catalog Number
A10Z62-SN02
A10Z62-SN05
A10Z62-SN15
A10Z62-SN50
Optimum Resonance
Resonance
Load
Point
Magnification
lbf/sheet
Hz
dB
1.1 to 4.4
4.4 to 11.0
11.0 to 33.1
33.1 to 110.2
27 to 21
29 to 23
26 to 18
22 to 15
6
8
13
20 to 18
Recommended Deflection
Frequency
in.
Hz
from 38
from 40
from 37
from 30
.06 to .12
.06 to .10
.04 to .09
.03 to .08
Color
Yellow
Green
Orange
Blue
9
10
11
12
13
14
15
8-9
16
I
R
SILICONE GEL TAPE & CHIPS

LOW COMPRESSION SET
HIGH WEATHER RESISTANCE
HIGH CHEMICAL RESISTANCE
EFFECTIVE IN NARROW SPACE
MATERIAL:
Inch
Silicone Gel
-40F to +212F
ADHESIVE AGENT ON ONE SIDE
3
W
4
L
Fig. 1
6
7
ADHESIVE AGENT
ON ONE SIDE
8
W
9
10
11
12
13
14
15
16
t
Fig. 2
INCH COMPONENT
Catalog Number
Fig. 1 Tape
A10Z62-GT1
.394
A10Z62-GT2
.787
A10Z62-GT3
.394
A10Z62-GT4
.787
A10Z62-GT5
.394
A10Z62-GT6
.787
Fig. 2 Chips Priced per sheet (25 chips per sheet)
A10Z62-GC1
.394
A10Z62-GC2
.394
A10Z62-GC3
.591
A10Z62-GC4
.591
A10Z62-GC5
.591
A10Z62-GC6
.787
A10Z62-GC7
.787
A10Z62-GC8
.787
8-10
39.4
39.4
39.4
39.4
39.4
39.4
.394
.394
.591
.591
.591
.787
.787
.787
.039
.039
.079
.079
.118
.118
.118
.197
.118
.197
.394
.118
.197
.394
SILICONE FOAM SHEETS

LOW COMPRESSION SET
OUTSTANDING DURABILITY
SHOCK ABSORBER
LOW FLAMMABILITY
FOR OUTSIDE USE
DURABLE IN ANY WEATHER
R
Inch
MATERIAL:
T
1
Silicone Foam
-40F to +392F
CHARACTERISTICS:
Specific Gravity
0.26
Tensile Strength (lbf/ft.2)
6683
Elongation (%)
73
Young's Modulus (lbf/ft.2)
5629
Specific Heat (Btu/(lb. F))
.275
Thermal Conductivity (Btu/(h ft. F))
.035
Specific Volume Resistance Ratio ( in.) .15x1015
Dielectric Breakdown Strength (kV/in.)
.15
Toluene
X
Acetone
X
Methanol
O
Distilled H20
O
Chemical
Fuel
X
Resistance
Lubricant
X
NaCI (10%)
O
HCI (10%)
O
NaOH (5%)
O
X = Has a reaction
COMPRESSION SET O = No reaction
50
3
4
W
5
T
7
8
COMPRESSION (%)
40
30
20
10
10
11
1
0.2
Silicone Chloro- Poly- Urethane
Foam prene ethylene Foam
Foam
1. Compress the materials by 50% and leave

compressed for 22 hours in +158F.
2. Release compression and leave subject in
normal temperature for 30 minutes.
12
13
INCH COMPONENT
Catalog Number
W
Width
T
Thickness
L
Length
Color
14
A10Z62-NPGRN0500
A10Z62-NPGRN2000
A10Z62-NPWTE0500
A10Z62-NPWTE1000
17.72
17.72
11.81
11.81
.118
.118
.236
.236
19.69
78.7
19.69
39.4
Green
Green
White
White
15
8-11
16
I
R
SQUARE MOUNTINGS TO 13.8 lbf

FOR COMPRESSION LOADS OF 5.1 TO 13.8 lbf
SHEAR LOADS OF 2.6 TO 7.1 lbf
Inch
MATERIAL:
Fastener - Steel, Zinc Plated

Isolator - Natural Rubber
NOTE:
2
3
Maximum unthreaded portion of stud

does not exceed 1/16 inch.
LOAD DEFLECTION GRAPHS:
LOAD (lbf)
14
15
16
COMPRESSION
SHEAR
x
x
x
x
2
.02
.04
.06
.08
.10
.12
A
x
.05
DEFLECTION (in.)
.10
.15
.20
DEFLECTION (in.)
.25
.30
INCH COMPONENT
CATALOG NUMBER
A10Z 1-321
Load Rating
A, B, C or D
10
13
10
8
10
12
D
x
12
3/8
12
14
11
3/8
18
16
1/2
#8-32 UNC (TYP)
3/8
Deflections below the line xx are considered

safe practice for static loads; data above that
line are useful for calculating deflections
under dynamic loads.
LOAD (lbf)
Compression
Forcing Frequency in Cycles per Minute
Load
Rating
Maximum Load
lbf
1100
1250
1500
A
B
C
D
5.1
6.4
11.1
13.8
Load
Rating
Maximum Load
lbf
1100
1250
1500
A
B
C
D
1.2
1.6
2.5
2.9
2.4
3.4
1750
2000
2500
2750
3000
3600
5.1
3.9
5.5
11.0
3.1
4.3
8.7
12.3
2.6
3.4
7.1
10.3
2.1
2.8
6.0
8.9
1.8
2.4
5.1
7.7
1.8
3.8
5.9
3000
3600
*
*
1.1
1.6
*
*
.9
1.2
Shear
1750
2000
2250
2500
2750
Minimum Load for 81% Isolation (lbf)
1.8
2.8
4.9
7.0
1.3
1.9
3.6
5.1
.9
1.4
2.9
3.9
.7
1.0
2.2
3.1
* At these forcing frequencies, lesser loads will yield less than 81% isolation.
8-12
2250
.6
.8
1.8
2.6
*
.7
1.5
2.1
*
.6
1.3
1.8
SQUARE MOUNTINGS TO 15.4 lbf

R
Inch
MATERIAL:

NOTE:

7/32

5/16
2
3/8
#8-32 UNC (TYP)
18
16
LOAD (lbf)
12
10
A
x
x
x
COMPRESSION
LOAD (lbf)
10
14
12
3/8
SHEAR
C
x
x
x
2
0
.01
.02
.03
.04
.05
DEFLECTION (in.)
.02
.04
.06
.08
.10
.12
DEFLECTION (in.)
.14
INCH COMPONENT
CATALOG NUMBER
A10Z 1-322
Load Rating
A, B, C or D
10
Compression
Load
Rating
Maximum Load
lbf
1500
1750
A
B
C
D
6.6
8.7
12.0
15.4
Load
Rating
Maximum Load
lbf
1500
1750
A
B
C
D
4.4
5.5
7.8
9.9
3.3
4.8
2.4
3.6
6.0
8.2
2000
2250
2500
2750
3000
3600
4.5
6.9
11.5
3.2
4.8
8.0
11.8
3000
3600
*
*
*
*
*
*
*
*
11
5.4
8.5
Shear
2000
2250
2500
2750
12
13
7.7
1.9
2.8
4.9
6.7
1.5
2.2
4.0
5.6
1.3
1.9
3.5
4.7
1.1
1.6
3.1
4.1
8-13
14
15
16
I
R
CYLINDRICAL / SQUARE MOUNTINGS TO 14.5 lbf

Inch
MATERIAL:

NOTE:
2
3


LOAD (lbf)
30
14
15
16
x
x
10
x
x
SHEAR
B
A
x
x
x
.02
.04
.06
.08 .10
.12
.14
.05
DEFLECTION (in.)
.10
.15
.20
.25
.30
DEFLECTION (in.)
INCH COMPONENT
CATALOG NUMBER
A10Z 1-323
Load Rating
A, B, C or D
10
13
15
COMPRESSION
20
1/2
10
25
12
#8-32 UNC (TYP)
35
11
1/2
40
9/16
3/8
9/16
LOAD (lbf)
Compression
Load
Rating
Maximum Load
lbf
950
1100
A
B
C
D
6.8
8.5
12.0
14.5
Load
Rating
Maximum Load
lbf
950
1100
A
B
C
D
2.8
3.3
5.3
7.3
2.8
1250
1500
2000
2250
2500
5.5
8.0
3.8
6.0
10.1
14.5
3.0
4.5
8.5
11.5
2.5
3.5
6.5
9.0
2250
2500
*
*
1.6
2.5
*
*
*
2.2
Shear
1250
1500
1750
2000

2.2
2.8
5.0
1.6
2.1
4.0
6.2
1.1
1.6
2.9
4.6
8-14
1750
.9
1.2
2.3
3.6
.7
.9
1.9
2.9
RING MOUNTINGS TO 20 lbf

FOR LOADS OF 1 TO 20 lbf
MATERIAL:
NATURAL FREQUENCY (Hz)
Fasteners - Steel, Zinc Plated

Inch
CURVE 1
40
35
SERIES 111, 112, 121 & 122
30
25
20
112
15
10
111 122
121
LOAD
0
LOAD PER MOUNT (lbf)
CURVE 2
35
30
L
Ref.
SERIES 131 & 132
25
20
131
15
132
10
5
B
5

CURVE 3
35
8
W
30
SERIES 141 & 142
25
20
15
141
10
5
10
142
0
5
10
15
20
11
INCH COMPONENT
Catalog Number
A10Z
A10Z
A10Z
A10Z
A10Z
A10Z
A10Z
A10Z
8-112
8-111
8-122
8-121
8-132
8-131
8-142
8-141
Rated
Load
1.0
2.0
2.5
3.0
5.0
8.0
13.0
20.0
#6-32
#6-32
#10-32
#10-32
1/4-20
1/4-20
5/16-18
5/16-18
.50
.50
.62
.62
.75
.75
.62
.62
lbf
H
H
(No
(Load) Load)
.51
.51
.58
.58
.81
.81
1.45
1.45
.56
.56
.68
.68
.93
.93
1.75
1.75
L
Ref.
.53
.53
.68
.68
1.00
1.00
1.62
1.62
1.56
1.56
1.93
1.93
2.54
2.54
3.00
3.00
.31
.31
.34
.34
.53
.53
.75
.75
K
C
Dynamic Damping
Spring Rate Constant
lbf / in.
90
155
63
77
137
210
122
172
.193
.376
.025
.058
.027
.174
.136
.262
NOTE: Static K is approximately 1/2 to 1/3 Dynamic Rate.
8-15
12
13
14
15
16
I
R
CYLINDRICAL MOUNTINGS TO 13.3 lbf

Inch
MATERIAL:

NOTE:
1
2
3

1/2
3/8

7/16
#8-32 UNC (TYP)
14
12
x
x
8
6
12
13
14
15
16
.04
.06
xx
SHEAR
A
x x
.08
.10
COMPRESSION
.02
2
.12
.05
.10
.15
.20
.25
.30
DEFLECTION (in.)
DEFLECTION (in.)
INCH COMPONENT
CATALOG NUMBER
A10Z 2-302
Load Rating
A, B, C or D
10
11
x
x
LOAD (lbf)
LOAD (lbf)
10
Compression
1250
1500
Load
Rating
Maximum Load
lbf
1000
A
B
C
D
4.9
6.4
10.4
13.3
Load
Rating
Maximum Load
lbf
1000
1250
1500
A
B
C
D
2.7
3.6
5.6
6.4
2.6
1.7
2.6
4.7
6.1
1.2
1.9
3.2
4.4
1750
2000
2500
2750
3000
3600
3.9
5.3
9.8
13.1
3.0
4.2
7.7
10.4
2.4
3.4
6.3
8.5
2.0
2.9
5.2
7.0
1.8
2.5
4.3
5.8
1.0
1.5
2.6
4.2
3000
3600
*
*
.9
1.4
*
*
.7
1.0
Shear
1750
2000
2250
2500
2750

1.0
1.4
2.5
3.4
.7
1.1
1.9
2.7
8-16
2250
.5
.8
1.5
2.2
*
.7
1.3
1.8
*
.6
1.1
1.6
CYLINDRICAL MOUNTINGS TO 25 lbf

FOR COMPRESSION LOADS OF 8 TO 25 lbf
R
Inch
MATERIAL:
Fastener - Hardened Steel, Zinc Plated

NOTE:

1
1/2
3/8

9/16
#8-32 UNC (TYP)
15
x
LOAD (lbf)
20
COMPRESSION
16
LOAD (lbf)
28
24
12
SHEAR
10
x
x
A
x
x
4
0
.02
.04
.06
DEFLECTION (in.)
.08
.10
.10
.20
DEFLECTION (in.)
.30
INCH COMPONENT
CATALOG NUMBER
A10Z 2-301
Load Rating
A, B, C or D
Compression
10
Load
Rating
Maximum Load
lbf
1000
1250
1500
A
B
C
D
8
12
16
25
Load
Rating
Maximum Load
lbf
1000
1250
1500
A
B
C
D
4.4
6.7
9.0
12.5
4.0
6.5
3.1
5.2
9.0
2.2
3.7
6.3
11.2
1750
2000
2250
2500
2750
3000
3600
2.7
4.5
9.6
15.2
2.0
3.2
6.8
10.4
3000
3600
*
*
*
2.8
*
*
*
2.0
11
Shear
6.2
10.2
4.8
8.0
4.0
6.5
14.0
22.0
3.2
5.4
11.6
18.2

1750
2000
2250
2500
2750
12
13
1.7
2.8
4.6
8.2
1.3
2.3
3.6
6.3
*
1.8
2.9
4.0
*
*
2.3
4.0
*
*
1.9
3.3
8-17
14
15
16
I
R
CYLINDRICAL MOUNTINGS TO 28.5 lbf

FOR COMPRESSION LOADS OF 22 TO 28.5 lbf
Inch
MATERIAL:

NOTE:
1
2
3
Maximum unthreaded portion of stud does not

exceed 1/16 inch.
3/8
.410

3/4
#1/4-20 UNC (TYP)

16
35
30
LOAD (lbf)
6
7
12
SHEAR
COMPRESSION
25
20
A
x
15
LOAD (lbf)
x
x
A
x
10
5
8
9
.01
.02
.03
DEFLECTION (in.)
13
14
.05
.10
.15
DEFLECTION (in.)
Load
Rating
Maximum Load
lbf
1500
A
B
22.0
28.5
Load
Rating
1750
Maximum Load
lbf
1500
1750
A
B
8.4
11.9
6.2
9.9
2000
2250
21.5
3000
3600
16.5
25.5
10.5
17.0
6.5
12.0

2000
2250
2500
3000
3600
2.5
*
*

4.7
7.3
3.7
5.6
3.0
4.4
8-18
2500
Shear
15
16
Load Rating
A or B
Compression
12
.05
INCH COMPONENT
CATALOG NUMBER
A10Z 2-307
10
11
.04
2.4
3.6

SHEAR LOADS OF 19 TO 42 lbf
R
Inch
MATERIAL:

NOTE:

1
1/2
17/32

3
1/4-20 UNC (TYP)
80
180
160
140
120
70
60
COMPRESSION
100
x
80
60
40
20
.02
SHEAR
.10
.12
x
x
30
40
10
.04 .06
.08
DEFLECTION (in.)
50
20
LOAD (lbf)
LOAD (lbf)
200
.05
x
x
.15 .20
.10
DEFLECTION (in.)
.25
.30
INCH COMPONENT
CATALOG NUMBER
8
9
A10Z 2-305
Load Rating
A, B, C or D
10
Compression

1250
1500
Load
Rating
Maximum Load
lbf
1100
A
B
C
D
40
43
74
75
Load
Rating
Maximum Load
lbf
1100
1250
1500
A
B
C
D
19
21
37
42
15.7
19.0
12.5
15.5
31.5
40.0
8.3
10.6
22.5
29.2
1750
2000
2250
2500
2750
3000
3600
13.5
17.5
33.0
38.5
10.0
12.5
23.5
27.5
3000
3600
*
*
*
9.5
*
*
*
*
30.5
38.0
74.0
24.0
30.0
58.5
67.5
19.5
24.8
47.5
55.5
16.0
20.5
39.5
45.5
1750
2000
2250
2500
2750

6.3
8.0
17.0
22.0
*
6.3
14.0
18.5
*
5.0
11.5
15.8
*
*
9.5
13.0
*
*
*
11.0
12
13
Shear
11
14
15
8-19
16
I
R

Inch
MATERIAL:

NOTE:
2
3

3/4

SEE TABLE
90
80
LOAD (lbf)
70
COMPRESSION
30
7
8
9
10
10
5
.02
.04
.06
.08
.12
.14
INCH COMPONENT
CATALOG NUMBER
A 1 0 Z 2Thread Code
300
317
SHEAR
Load Rating
A, B, C or D
300
317
A
x
.05
.10
.15
.20
.25
.30
.35
DEFLECTION (in.)
1/4 20
5/16 18
1/2
9/16
11
12
A
B
C
D
33
40
60
79
Load
Rating
1100
1250
Maximum Load
lbf
850
1100
1250
A
B
C
D
18
21
34
40
16.0
9.3
13.0
24.5
32.0
7.2
10.2
20.0
26.0
1500
1750
2000
2250
2500
3000
3600
7.0
9.5
17.0
24.5
5.0
7.0
11.5
17.0
3000
3600
1.2
1.8
4.5
6.0
Shear
29.0
39.5
21.0
28.5
49.0
72.5
16.0
21.5
37.0
55.0
12.5
17.0
29.5
43.5
10.5
14.0
24.0
36.0

1500
1750
2000
2250
2500

5.0
7.0
14.7
19.0
3.8
5.3
11.2
14.8
8-20
xx
Thread Thread Thread

Code
UNC Length
850
16
C
x
DEFLECTION (in.)
Maximum Load
lbf
15
.10
x
x
20
10
15
Compression
14
25
20
Load
Rating
13
30
40
35
60
50
40
LOAD (lbf)
2.8
4.0
9.0
12.0
2.3
3.2
7.5
10.0
1.8
2.6
6.2
8.3
*
3.5
5.0

R
Inch
MATERIAL:

NOTE:

9/16

3
5/16-18 UNC (TYP)
120
45
40
100
80
COMPRESSION
60
x
x
40
B
A
LOAD (lbf)
LOAD (lbf)
20
1
x
D
x
x
35
30
25
C
x
SHEAR
20
15
10
B
x
A
x
5
0
.02 .04 .06 .08 .10 .12 .14 .16 .18

DEFLECTION (in.)
.10
.20 .30
.40
DEFLECTION (in.)
.50
.60
INCH COMPONENT
CATALOG NUMBER
A10Z 2-316
8
9
Load Rating
A, B, C or D
Compression
10

950
1100
Load
Rating
Maximum Load
lbf
700
A
B
C
D
37
48
57
86
Load
Rating
Maximum Load
lbf
700
950
1100
A
B
C
D
16
21
35
43
16.0
8.0
12.5
23.5
32.0
6.5
9.5
18.0
24.5
1250
1500
1750
2000
2250
2500
3000

35.0
24.0
34.0
46.0
80.0
18.0
26.0
32.5
59.0
13.5
20.5
26.5
48.0
11.0
16.0
20.0
38.0
13.0
16.0
30.0
21.0
2500
3000
*
*
*
*
*
*
*
*
Shear
1250
1500
1750
2000
2250
11
12
13

5.0
7.5
14.0
19.0
3.5
5.5
10.0
13.0
*
4.0
7.5
9.5
*
*
6.0
7.5
*
*
*
*
8-21
14
15
16
I
R

Inch
MATERIAL:

1
2

9/16
3/4
3
5/16-18 UNC (TYP)
4
200
x
x
60
40
20
x
x
.05
SHEAR
40
30
A
x
.25
.30
.10
.20
.30
DEFLECTION (in.)
.40
.50
Load Rating
A, B, C or D
Compression

850
1100
11
Maximum Load
lbf
700
12
A
B
C
D
47
74
96
105
Load
Rating
Maximum Load
lbf
700
850
1100
A
B
C
D
27
41
66
66
27.0
13
1250
1500
2000
2250
2500
3000
44.5
72.5
30.0
48.5
75.7
100.0
22.0
35.5
55.5
73.0
18.0
27.0
43.0
56.5
13.5
21.0
34.0
45.0
11.0
17.5
28.0
38.0
12.5
19.5
25.5
2500
3000
*
*
*
8.5
*
*
*
*
Shear
8-22
1750
1250
1500
1750
2000
2250

19.5
31.0
53.5
61.0
11.5
19.0
33.0
38.0
9.0
14.5
26.5
30.5
6.0
10.5
19.0
22.0
16
50
10
.10
.15
.20
DEFLECTION (in.)
Load
Rating
15
INCH COMPONENT
CATALOG NUMBER
A10Z 2-311
10
14
20
x
60
A
80
70
COMPRESSION
100
80
LOAD (lbf)
LOAD (lbf)
180
160
140
120
1-1/4
*
8.0
14.0
19.5
*
*
11.5
13.0
*
*
9.0
10.5

R
Inch
MATERIAL:


1
1-1/4
9/16
2
3
5/16-18 UNC (TYP)
C
160
LOAD (lbf)
LOAD (lbf)
100
80
A
x
60
x
40
60
COMPRESSION
4
D
70
140
120
1-1/4
80
50
SHEAR
40
30
B
x
20
C
x
10
20
0
.05
.10 .15 .20 .25

DEFLECTION (in.)
.30
.35
.1
.2
.3
.4
.5
DEFLECTION (in.)
.7
.6
INCH COMPONENT
CATALOG NUMBER
A10Z 2-310
8
9
Load Rating
A, B, C or D
10
Compression

850
950
Load
Rating
Maximum Load
lbf
600
A
B
C
D
41
64
90
120
Load
Rating
Maximum Load
lbf
600
850
950
A
B
C
D
21
31
48
63
20.0
11.0
18.0
31.5
50.0
8.5
14.0
25.0
41.0
1100
1250
1500
1750
2000
2500
3000
7.0
12.0
20.0
38.5
8.5
14.0
26.5
2500
3000
*
*
*
8.0
*
*
*
*

34.5
27.5
48.0
80.0
19.0
32.0
55.0
89.0
14.0
24.0
41.5
70.5
10.0
17.5
30.0
53.0
Shear
1100
1250
1500
1750
2000

6.7
10.5
19.5
32.6
5.5
8.0
15.5
27.5
*
5.5
11.0
20.5
*
*
8.5
16.0
*
*
*
14.0
11
12
13
14
15
8-23
16
I
R

Inch
MATERIAL:


9/16
5/16-18 UNC (TYP)

350
325
300
275
250
225
LOAD (lbf)
5
6
70
SHEAR
50
40
x
x
x
20
10
.10
.15
.20
DEFLECTION (in.)
.25
.1
.2
.3
.4
DEFLECTION (in.)
.5
.6
Load Rating
A, B, C or D

850
950
11
Load
Rating
Maximum Load
lbf
750
12
A
B
C
D
56
82
115
123
Load
Rating
Maximum Load
lbf
750
850
950
A
B
C
D
32
37
48
63
31.0
13
1100
1250
1750
2000
2500
3000
40.0
68.5
107.0
28.0
50.0
77.5
92.0
21.0
35.0
57.0
67.5
13.0
23.0
27.5
43.0
17.0
22.0
32.0
2500
3000
*
*
6.5
11.0
*
*
*
8.0
Shear
8-24
1500
1100
1250
1500
1750
2000

24.0
32.0
45.0
19.0
26.0
38.0
56.0
14.0
19.0
29.0
45.0
11.0
15.0
24.0
38.0
16
C
x
30
.05
D
x
Compression
15
10
14
80
60
200
175
150
INCH COMPONENT
CATALOG NUMBER
A10Z 2-315
1-1/4
COMPRESSION
125
100
75
50
25
3/4
LOAD (lbf)
8.0
10.0
17.0
27.0
5.6
7.6
13.0
21.0
*
5.1
10.0
17.0

R
Inch
MATERIAL:


9/16
3/4
2
3
5/16-18 UNC (TYP)
1-1/4
80
x
140
120
70
COMPRESSION
100
80
x
x
x
60
A
x
40
20
60
LOAD (lbf)
LOAD (lbf)
50
SHEAR
40
xx
30
A
x
20
10
0
.02
.04
.06
.08
DEFLECTION (in.)
.10
.12
.10
.20
.30
DEFLECTION (in.)
.40
INCH COMPONENT
CATALOG NUMBER
A10Z 2-314
8
9
Load Rating
A, B, C or D
10
Compression

1100
1250
Load
Rating
Maximum Load
lbf
950
A
B
C
D
56
73
109
142
Load
Rating
Maximum Load
lbf
950
1100
1250
A
B
C
D
32
38
51
64
23.0
32.0
18.0
24.5
44.5
58.0
14.5
19.0
36.0
46.5
1500
1750
2000
2250
2500
3000
3600
12.5
16.5
28.0
44.0
12.0
20.0
30.0
3000
3600
*
*
*
9.5
*
*
*
*
Shear
50.0
73.0
38.0
51.0
85.0
129.0
28.5
39.0
63.5
99.0
22.5
30.5
50.0
78.0
18.0
24.5
41.0
64.0
1750
2000
2250
2500

10.0
13.0
26.0
34.0
7.5
9.5
19.5
27.0
*
7.0
14.0
20.5
*
*
12.0
17.0
*
*
10.0
14.0
12
13

1500
11
14
15
8-25
16
I
R

Inch
MATERIAL:

1
2

5/8
9/16
3
5/16-18 UNC (TYP)
4
200
LOAD (lbf)
6
7
8
9
180
160
140
120
100
COMPRESSION
x
x
x
0 .01 .02 .03 .04 .05 .06 .07 .08 .09 .10 .11
DEFLECTION (in.)
Compression
SHEAR
xx
50
B
A
x x
40
30
20
0 .02
.06
.10 .14 .18 .20

DEFLECTION (in.)
.24
.28
11
Maximum Load
lbf
950
12
A
B
C
D
93
118
158
185
Load
Rating
Maximum Load
lbf
950
1100
1250
A
B
C
D
36
46
57
67
34.0
13
1100
1250
1500
1750
2250
2500
2750
3000
71.0
106.0
51.0
81.0
121.0
164.0
39.0
64.0
96.0
131.0
31.0
52.0
79.0
109.0
25.0
43.0
65.0
90.0
35.0
54.0
74.0
2750
3000
*
*
*
14.0
*
*
*
*
Shear
8-26
2000
1500
1750
2000
2250
2500

25.0
38.0
19.0
30.0
50.0
66.0
13.5
21.0
35.0
46.0
10.0
16.0
26.0
34.0
16
C
x
10
Load
Rating
15
90
80
70
60
Load Rating
A, B, C or D
10
14
80
60
40
20
INCH COMPONENT
CATALOG NUMBER
A10Z 2-312
100
LOAD (lbf)
1-3/8
*
12.0
20.0
26.0
*
9.5
16.0
21.0
*
*
13.0
18.0

NOT RECOMMENDED FOR STATIC SHEAR LOADS
Inch
MATERIAL:


1
1
2
3
5/16-18 UNC
TAPPED
.40 DEEP MIN.
5/16-18 UNC x 9/16
450
350
300
400
LOAD (lbf)
1-1/2
COMPRESSION
250
x
200
150
x
x
x
x
100
50
0
.05
INCH COMPONENT
CATALOG NUMBER
A10Z 2-308
.10
.20
.15
DEFLECTION (in.)
.25
.30
Load Rating
A, B, C or D
10
Compression
Load
Rating
Maximum Load
lbf
1150
A
B
C
D
95
135
185
210
95
1250
1500
1750
2000
2750
3500
15
22
40
55

80
120
55
85
140
185
40
60
100
135
30
45
75
105
25
35
11
12
13
14
15
8-27
16
I
R

NOT RECOMMENDED FOR STATIC SHEAR LOADS
Inch
MATERIAL:


2
1
3
4
5
1
5/16-18 UNC TAPPED

.20 DEEP MIN. (TYP)
120
100
x
LOAD (lbf)
8
9
80
COMPRESSION
60
x
x
40
B
A
20
10
11
INCH COMPONENT
CATALOG NUMBER
14
Load Rating
A, B, C or D
Compression
Load
Rating
Maximum Load
lbf
700
A
B
C
D
37
48
57
86
15
16
.02 .04 .06 .08 .10 .12 .14 .16 .18

DEFLECTION (in.)
A10Z 2-319
12
13
8-28
950
1100
1250
1500
1750
2000
2250
2500
3000
35.0
24.0
34.0
46.0
80.0
18.0
26.0
32.5
59.0
13.5
20.5
26.5
48.0
11.0
16.0
20.0
36.0
13.0
16.0
30.0
21.0

FOR COMPRESSION LOADS OF 330 lbf
SHEAR LOADS OF 140 lbf
R
Inch
MATERIAL:


1
2
X
1/2-20 UNF (TYP)
3
4
5
X
1-1/32
29/32
2-3/4
SECTION X-X
400
7
COMPRESSION
350
LOAD (lbf)
300
COMPRESSION
250
200
SHEAR
150
100
10
SHEAR
50
INCH COMPONENT
CATALOG NUMBER
A10Z 2-330B
.1
.3
.2
.4
.5
11
DEFLECTION (in.)
Compression
12
Load
Rating
Maximum Load
lbf
700
850
330
Load
Rating
Maximum Load
lbf
700
850
140
140
1100
1250
1500
1750
2000
2250
2500
120
90
2250
2500
Shear
255
190
150

1100
1250
1500
1750
2000
13
14

105
65
52
38
32
8-29
15
16
CONICAL BUMPERS
FOR LOADS OF 44 TO 62 lbf (20 to 28.1 kgf)
R
T
MATERIAL:
Inch

Isolators - Natural Rubber
1
2
5/16 - 24 UNF THREAD
1-1/2
4
3/4
5
6
INCH COMPONENT
Recommended Maximum Load
Catalog Number
7
8
Static
Occasional Dynamic
44
49
56
62
80
100
122
145
lbf
A10Z
A10Z
A10Z
A10Z
9
10
11
12
13
14
15
16
1-1/4
8-30
7-1020A
7-1020B
7-1020C
7-1020D
lbf
NEOPRENE CYLINDRICAL MOUNTINGS TO 16 lbf

SHEAR LOADS OF 4.4 TO 9 lbf
OIL-RESISTANT ELASTOMER
R
Inch
MATERIAL:

Isolator - Neoprene
T
1

3/8
1/2
3
4
#8-32 UNC
9/16
32
15
28
20
COMPRESSION
LOAD (lbf)
LOAD (lbf)
24
x
16
12
A
5
10
SHEAR
4
0
.02
.04
.06
.08
.10
.10
DEFLECTION (in.)
.20
.30
DEFLECTION (in.)
INCH COMPONENT
CATALOG NUMBER
A10Z 2-304
9
10
Load Rating
A or C
11
Compression
1250
1500
Load
Rating
Maximum Load
lbf
1100
A
C
8
16
Load
Rating
Maximum Load
lbf
1100
1250
1500
A
C
4.4
9
4.0
1750
2000
2250
2500
2750
3000
3600
2.7
9.6
2.0
6.8
3000
3600
*
*
*
*
6.2
4.8
4.0
14.0
3.2
11.6
12
13
Shear
1750
2000
2250
2500
2750

3.1
9.0
2.2
6.3
1.7
4.6
1.3
3.6
*
2.9
*
2.3
*
1.9
8-31
14
15
16
I
R
T
NEOPRENE CYLINDRICAL MOUNTINGS TO 60 lbf

OIL-RESISTANT ELASTOMER
Inch
MATERIAL:

Isolator - Neoprene
NOTE:

1/2

1/4-20 UNC
1
90
80
LOAD (lbf)
60
50
40
14
15
10
10
5
.02
.04
.06
.08
.10
.12
15
.14
x
x
.05
.10
.15
.20
.25
.30
.35
DEFLECTION (in.)
INCH COMPONENT
CATALOG NUMBER
A10Z 2-306
Load Rating
A, C or C1
Compression
Maximum
Load
lbf
33
60
60
850
Load
Rating
Maximum Load
lbf
850
1100
1250
A
C
C1
18
34
34
16.0
Load
Rating
A
C
C1
3/4
3/4
51/64
1100
1250
1500
1750
2250
2500
3000
3600
29.0
21.0
49.0
49.0
16.0
37.0
37.0
12.5
29.5
29.5
10.5
24.0
24.0
7.0
17.0
17.0
5.0
11.5
11.5
3000
3600
1.2
4.5
4.5
*
3.5
3.5
Shear
8-32
2000
1500
1750
2000
2250
2500

9.3
24.5
24.5
7.2
20.0
20.0
5.0
14.7
14.7
3.8
11.2
11.2
16
25
DEFLECTION (in.)
11
13
SHEAR
20
20
12
C & C1
x
30
30
10
COMPRESSION
35
C & C1
LOAD (lbf)
40
70
2.8
9.0
9.0
2.3
7.5
7.5
2.3
7.5
7.5
URETHANE CYLINDRICAL MOUNTINGS TO 45 lbf

FOR COMPRESSION LOADS OF .3 TO 45 lbf
SHEAR LOADS OF .1 TO 10 lbf
R
Inch
MATERIAL:

Isolator - Urethane
FEATURES:
Highly damped.
These isolators exhibit extremely low amplification
at resonance and quickly return to system equilibrium
after shock or vibration input.
Very resistant to abrasion, oils, chemicals, ozone and
ultraviolet radiation.
STYLE CODE:
1
2
P
F B Female - Blank
M F Male - Female
O.D.
O.D.
TD
TD
Male - Female
Female - Blank
INCH COMPONENT
Catalog Number
Durometer
O.D.
A10Z601U0452
*A10Z60-FB2U0624
A10Z602U0652
*A10Z60-FB2U0824
A10Z602U0852
A10Z603U2552
A10Z604U3152
52
24
52
24
52
52
52
.280
.405
.405
.405
.405
.625
1.000
.320
.500
.500
.500
.500
.625
.750
.200
.375
.375
.375
.375
.500
.625
.060
.060
.060
.060
.060
.100
.100
Catalog Number
(Ref.)
A10Z601U0452
* A10Z60-FB2U0624
A10Z602U0652
* A10Z60-FB2U0824
A10Z602U0852
A10Z603U2552
A10Z604U3152
Stiffness lbf/in.
Static
Dynamic
Cmpr.
200
42
270
42
270
900
2580
Shear
27
7
47
7
47
92
230

Shear load data not applicable for Female-Blank style.
Cmpr.
765
164
1049
164
1049
2350
6727
Shear
148
33
208
33
208
385
896
Load lbf
TD
Thread Thread
Size
Depth Cmpr. Shear
#4-40
#6-32
#6-32
#8-32
#8-32
1/4-20
5/16-18
.110
.160
.160
.160
.160
.260
.290
2.0
.6
4.0
.6
4.0
12.0
45.0
.8
.3
2.0
.3
2.0
3.5
10.0
Temperature Range
Peak
Performance
Max.
Intermittent
+55F to +105F
+32F to + 90F
+55F to +105F
+32F to + 90F
+55F to +105F
+55F to +105F
+55F to +105F
+225F
+120F
+225F
+120F
+225F
+225F
+225F
7
8
9
10
11
12
13
14
15
8-33
16
I
R
URETHANE CYLINDRICAL MOUNTINGS TO 50 lbf

FOR COMPRESSION LOADS OF .5 TO 50 lbf
SHEAR LOADS OF .2 TO 13 lbf
Inch
MATERIAL:

Isolator - Urethane
FEATURES:
1
2
3
Highly damped.
These isolators exhibit extremely low amplification
at resonance and quickly return to system equilibrium
after shock or vibration input.
Very resistant to abrasion, oils, chemicals and
ultraviolet radiation.
STYLE CODE:
M B Male - Blank
M M Male - Male
4
O.D.
O.D.
5
G
8
9
10
11
12
13
.625
Male - Blank
Load lbf
Catalog Number
Durometer
O.D.
Thread
Size
Cmpr.
Shear
1U0424
*A10Z60A10Z601U0452
*A10Z60-MB2U0624
A10Z602U0652
*A10Z60-MM2U0824
A10Z602U0852
A10Z603U2552
A10Z604U3152
24
52
24
52
24
52
52
52
.280
.280
.405
.405
.405
.405
.625
1.000
.320
.320
.500
.500
.500
.500
.625
.750
.200
.200
.375
.375
.375
.375
.500
.625
.060
.060
.060
.060
.060
.060
.100
.100
#4-40
#4-40
#6-32
#6-32
#8-32
#8-32
1/4-20
5/16-18
.5
4.0
1.0
8.0
1.0
8.0
20.0
50.0
.2
1.5
.4
3.0
.4
3.0
5.0
13.0
.625
Catalog Number
(Ref.)
* A10Z601U0424
A10Z601U0452
* A10Z60-MB2U0624
A10Z602U0652
* A10Z60-MM2U0824
A10Z602U0852
A10Z603U2552
A10Z604U3152
Stiffness lbf/in.
Dynamic
Static
Cmpr.
25
159
31
200
31
200
320
860
Shear
3
19
4
24
4
24
35
75

Shear load data not applicable for Male-Blank style.
14
15
16
Male - Male
INCH COMPONENT
8-34
Cmpr.
40
262
45
285
45
285
471
1108
Shear
9
59
12
74
12
74
120
270
Temperature Range
Peak
Performance
Max.
Intermittent
+32F to + 90F
+55F to +105F
+32F to + 90F
+55F to +105F
+32F to + 90F
+55F to +105F
+55F to +105F
+55F to +105F
+120F
+225F
+120F
+225F
+120F
+225F
+225F
+225F
PLATEMOUNTS TO 20 lbf
MATERIAL:

Base - Steel or Aluminum
Inch
T
1
2
1.25
1.0
3
4
5
.165
LOAD/DEFLECTION GRAPH
Maximum Recommended
Static Load/Deflection
.17
40
LOAD (lbf)
.46
30
20
.75
SECTION X-X
A
.05
DEFLECTION (in.)
1.0
.035
10
.17
.10
1.25
1.414
INCH COMPONENT
10
Catalog Number
Aluminum
Steel
A10Z40-1210B1
A10Z40-1210C1
A10Z40-1210D1
A10Z40-1210A2
A10Z40-1210B2
A10Z40-1210C2
A10Z40-1210D2
A10Z40-1210C3
A10Z40-1210B4
A10Z40-1210C4
A10Z40-1210D4
Load Rating
A
B
C
D
Base Type
Maximum
Load
lbf
4
8
12
20
11
Square
.165
1.68
Diamond
13

1900
2500
3000
4000

4
8
12
20
2
4
7
11
1.5
3.0
5.0
8.0
12
1
2
3
5
NOTE: The above platemounts are available in Neoprene as a special order (200 pc. minimum).
8-35
14
15
16
R
T
MATERIAL:
Inch

1
1.78
2
30
1.38
X
DD
20
CK
15
CC
BK
10
.26
BB
.16
DK
25
LOAD (lbf )
Maximum Recommended
DL
.20
AA
.63
.05
.10
DEFLECTION (in.)
.39
.050
1.50
SECTION X-X
INCH COMPONENT
Catalog Number
8
9
10
11
12
Aluminum
Steel
A10Z40-1215BB1
A10Z40-1215BK1
A10Z40-1215CC1
A10Z40-1215CK1
A10Z40-1215DD1
A10Z40-1215DK1
A10Z40-1215DL1
A10Z40-1215AA2
A10Z40-1215BB2
A10Z40-1215BK2
A10Z40-1215CC2
A10Z40-1215DD2
A10Z40-1215BB3
A10Z40-1215CC3
A10Z40-1215CK3
A10Z40-1215DL3
A10Z40-1215AA4
A10Z40-1215BB4
A10Z40-1215CC4
A10Z40-1215CK4
A10Z40-1215DD4
A10Z40-1215DK4
Load Rating
Base Type
Maximum
Load
1.95
Square
14
15
16
AA
BB
BK
CC
CK
DD
DK
DL
3
6
9
12
14
17
20
26
.16
2.34
Diamond

1600
lbf
13
1.78
1750
2000
2500
3000
3
6
9
12
14
17
20
26
2
5
7
9
11
13
16
20
1.7
3.5
5.0
7.0
9.0
11.0
12.0
16.0
1.0
2.0
3.0
4.5
5.5
6.5
8.0
10.0
.8
1.6
2.4
3.0
4.0
5.0
5.5
7.0
NOTES: 1. The above platemounts are available in Neoprene as a special order (200 pc. minimum).
2. The above platemounts may be discontinued but are available in large quantities.
8-36
3500
4000

.6
1.2
1.7
2.2
2.8
3.4
4.0
5.0
.4
.8
1.3
1.7
2.2
2.6
3.0
4.0
MATERIAL:
Inch

T
1
2.25
LOAD (lbf )
Maximum Recommended
90
80
70
60
50
40
30
20
10
0
1.75 X
DK
.19
DD
.391
CC
BB
AA
.05
.10
.15
.20
DEFLECTION (in.)
.34
.56
1.0
.062
.25
SECTION X-X
5
6
2.00
7
2.25
2.475
INCH COMPONENT
Catalog Number
Aluminum
Steel
A10Z40-1260AA2
A10Z40-1260CC2
A10Z40-1260DD2
A10Z40-1260DK2
A10Z40-1260CC3
A10Z40-1260DD3
A10Z40-1260DK3
A10Z40-1260AA4
A10Z40-1260BB4
A10Z40-1260CC4
A10Z40-1260DD4
A10Z40-1260DK4
Base Type
Square
10
11
Load Rating
Maximum
Load
1100
1250
AA
BB
CC
DD
DK
12
20
30
45
60
12
20
30
45
60
10
16
23
35
47
lbf
.19
2.98
Diamond
1500
1750
2000
2500
3000
3500
2
3
4
6
7
1
2
3
4
6
12

7
11
15
23
31
5
7
11
17
22
3
6
9
13
17
2
4
5
8
11
13
14
15
8-37
16
R
T
MATERIAL:

Inch
1
2.25
2
3
90
.19
60
CC
50
BB
30
20
.399
.386
BK
40
.22
.59
1.000
.062
2.00
SECTION X-X
10
.02 .04 .06 .08 .10 .12
.14
2.25
DEFLECTION (in.)
CK
70
LOAD (lbf)
1.75
80
4
5
Maximum Recommended
Static Load/Deflection DD
2.475
INCH COMPONENT
Catalog Number
10
11
12
13
14
15
16
Aluminum
Steel
A10Z40-1220BK1
A10Z40-1220DD1
A10Z40-1220DD2
A10Z40-1220BB3
A10Z40-1220CC3
A10Z40-1220DD3
A10Z40-1220BB4
A10Z40-1220BK4
A10Z40-1220CK4
A10Z40-1220DD4
Load Rating
Base Type
Maximum
Load
Square
2.98
Diamond

1325
lbf
BB
BK
CC
CK
DD
30
40
50
70
90
.19
1750
2000
2500
3000
30
40
50
70
90
17
23
29
40
52
13
18
22
31
40
8.4
11.0
14.0
20.0
25.0
6.0
7.8
10.0
14.0
18.0
8-38
3500
4000

4.3
5.7
7.2
10.0
13.0
3.3
4.4
5.5
7.0
10.0

MATERIAL:
Inch

Base - Steel
T
1
2
.687
1000
800
LOAD (lbf)
3.25
Maximum Recommended
600
2.90 MAX.
C
1.14
400
2.25
.135
200
0
.05
.10
2.26
2.75
.15
DEFLECTION (in.)
6
7
8
.406
9
10
11
4.25
5.25
12
INCH COMPONENT
Catalog Number
Maximum
Load
1300
1500
A10Z40-1280B
A10Z40-1280C
A10Z40-1280D
440
560
760
440
560
760
300
380
520
lbf
2000
2500
3000
3500
4000
13

160
200
270
100
120
170
70
90
120
50
60
90
40
50
70
NOTE: The above platemounts are available in Neoprene as a special order (200 pc. minimum).
14
15
8-39
16
I
R
SOLO UNITIZED CENTER BOLT MOUNTS

SOLO TYPE
MATERIAL:
Inch
Outer Body - Natural Rubber Load-Carrying Member

Spacer - Steel, Tubular Rolled
INSTALLATION:
1
2
3
1. Lubricate mount and socket with water or rubber lubricant.

2. Insert into socket, hand rotate with axial force.
3. If necessary, use driving bolt. Care must be taken that the
driving bolt does not overhang the steel sleeve O.D.
SELECTION CRITERIA:
Calculate static load. Select a mount of equal or greater

capacity. For dynamic loads greater than 3X static load,
select next larger size.

Preassembly Dimensions
O.D.
M
L
6
7
8
9
10
11
O.D.
C
Catalog
Number
(Ref.)
Recommended L
Cinch
Dia.
Washer
M
Dia.
.40
.40
.51
.40
.66
.66
.66
.66
.94
1.06
1.56
1.56
2.00
1.56
2.81
2.81
2.81
2.81
3.88
5.25
.09
.09
.13
.09
.19
.19
.19
.19
.25
.38
A10Z42-1010
A10Z42-2000
A10Z42-4000
A10Z42-4040
A10Z42-4050
A10Z42-5000
A10Z42-6000
A10Z42-6020
A10Z42-7000
A10Z42-8020
A
A
A
A
A
A
A
A
A
A
9C20-040
9C20-040
9C20-051
9C20-040
9C20-066
9C20-066
9C20-066
9C20-066
9C20-094
9C20-106
12
14
15
16
ISOLATED
UNIT
B
J BEVEL
SUPPORT
PLATE
ASSEMBLY BOLT
CINCH WASHER
Solo Mounting
INCH COMPONENT
Catalog Number
13
Cinch Washer
A10Z42-1010
A10Z42-2000
A10Z42-4000
A10Z42-4040
A10Z42-4050
A10Z42-5000
A10Z42-6000
A10Z42-6020
A10Z42-7000
A10Z42-8020
8-40
Nominal Nominal
Load Deflection
Rating
Rating O.D.
Axial
Axial
lbf
in.
60
125
200
200
200
425
500
500
900
1300
.010
.018
.015
.035
.030
.020
.030
.030
.075
.030
1.00
1.09
2.00
2.00
2.00
2.50
3.00
3.00
3.75
4.53
C
Dia.
F
Dia.
H
Dia.
.17
.19
.48
.46
.46
.56
.71
.76
.94
1.12
.75
.75
1.25
1.25
1.25
1.50
1.81
1.81
2.00
2.75
.13
.31
.62
.25
.25
.75
.93
.50
.75
1.75
.44
.69
1.38
1.00
1.00
1.71
2.00
1.56
2.12
3.37
.38
.38
.52
.39
.64
.64
.64
.64
.77
1.06
.18
.21
.52
.52
.52
.62
.81
.81
1.16
1.22
.77
.78
1.31
1.32
1.25
1.50
1.81
1.81
2.06
2.75
.03
.03
.06
.06
.06
.06
.12
.12
.09
.12
.55
.96
2.18
1.30
1.30
2.20
2.42
1.97
2.66
4.34
TANDEM UNITIZED CENTER BOLT MOUNTS

TANDEM TYPE
MATERIAL:
Inch
Outer Body - Natural Rubber Load-Carrying Member

Spacer - Steel, Tubular Rolled
INSTALLATION:
1. Lubricate mount and socket with water or rubber lubricant.

2. Insert into socket, hand rotate with axial force.
3. If necessary, use driving bolt. Care must be taken that the
driving bolt does not overhang the steel sleeve O.D.
1
2
SELECTION CRITERIA:
Calculate static load. Select a mount of equal or greater

capacity. For dynamic loads greater than 3X static load,
select next larger size.
Preassembly Dimensions
O.D.
H
G
K E
J (RADIUS)
SHOWN FOR
MOUNTING
ORIENTATION
M
L
1.25
F
.920
Cinch Washer
Recommended Dimensions
O.D.
H
A10Z42-A7010
O.D.
C
9
B
ISOLATED UNIT
10
MOUNT
SUPPORT PLATE
2xE
MOUNT
11
ASSEMBLY BOLT
INCH COMPONENT
Catalog Number
A10Z42-A3010
A10Z42-A5020
* A10Z42-A6010
A10Z42-A7010
CINCH WASHER
12
Tandem Mounting
Nominal Nominal
Load Deflection
Rating
Rating O.D. B
Axial
Axial
lbf
in.
150
425
500
900
.010
.015
.018
.080
1.78
2.58
3.00
3.75
.38
.87
.75
.74
C
1.12
1.50
1.81
2.25
F
H
E Dia. G Dia. J
.38 .59 .52 .43

.50 1.05 .64 .92
.75 1.16 .64 .79
.75 1.13 .77 1.14
1.15
1.58
1.87
2.28
L M N
K Dia. Dia. Min.
.63 .52 1.75

.06 1.17 .64 2.50
.06 1.19 .64 3.00
1.52 .77 4.00
* Chamfer at one end 22.50 X .20.
8-41
.10
.15
.19
.25
13
14
15
16
FINGER-FLEX MOUNTINGS
TYPICAL INSTALLATION ARRANGEMENTS
R
T
1
2
3
4
MULTIPLE INSTALLATIONS:
Inch
Any number of Finger-Flex mountings can be installed in

parallel to achieve greater load-carrying capacity. These
mountings may also be stacked in series to meet greater
deflection requirements. Separators between mountings, if
used, must be designed to meet the specific requirements of
the installation.
TYPICAL INSTALLATIONS:
Finger-Flex mountings are used for office machines,

electronic equipment, motors, air conditioning equipment,
heating equipment, fans, blowers, pumps and scientific
equipment.
Rubber parts used are similar to type A10R 4-1504 and
A10R 4-1505 combination. The difference is that the flange of
the rubber bushing within this assembled mounting has fingers
on only one of its surfaces. The ring member absorbs both
vibration and shock.
5
SHOULDER BOLT
6
7
A.
If the load support is 1/2 inch or more
thick, two Finger-Flex bushings are
generally used.
MOUNTING BASE
FINGER-FLEX BUSHING
MOUNTING SUPPORT
FINGER-FLEX BUSHING
REBOUND PLATE
9
10
11
B.
When the load supporting member is
1/8 inch to 1/2 inch thick, the standard
bushing and ring combination is most
suitable.
SHOULDER BOLT
MOUNTING BASE
FINGER-FLEX BUSHING
MOUNTING SUPPORT
FINGER-FLEX BUSHING
REBOUND PLATE
12
13
14
C.
If the load supporting member is less
than 1/8 inch thick, the metal
surrounding the mounting hole should
be turned up. This provides additional
mounting area for the bushing.
15
16
8-42
SHOULDER BOLT
MOUNTING BASE
FINGER-FLEX BUSHING
MOUNTING SUPPORT
FINGER-FLEX BUSHING
REBOUND PLATE
FINGER-FLEX ASSEMBLIES
MATERIAL:
Inch
Housing - Zinc Plated Steel with Clear Dichromate Sealer

Isolator - Rubber
Assembled style A10Z 4- mounts are supplied

with rubber bushings and rings permanently
installed within a convenient zinc plated metal
mounting cup. Load is supported by the top surface
of the assembly which has a 17/64 diameter clearance
hole to accommodate a screw fastener from the load member.
The cup base dimensions and mounting hole pattern conform
to MIL size 2 specifications. The rubber isolation members are
similar to the FINGER-FLEX A10R 4-1504 and A10R 5-1505 series.
T
1
2
3
13/64
17/64 HOLE
4
5
2-3/8
6
1-15/16
2-3/8
1-15/16
23/32
A10R 4-1504
1-1/8
LOAD (lbf)
LOAD (lbf)
3/64
40
30
20
10
0
A10Z 4-1550D
A10Z 4-1550A
5
10
20
15
25
10
40
30
20
10
0
A10Z 4-1550D
11
A10Z 4-1550A
.02
.04
.06
DEFLECTION (in.)
.08
.10
12
13
INCH COMPONENT
Compression Load
Min.
Max.
Approximate
Hardness
Durometer
6
15
20
37
30
60
lbf per mount
Catalog Number
A10Z 4-1550A
A10Z 4-1550D
A10R 4-1505
14
15
8-43
16
FOR LOADS UP TO 50 lbf (110.2 kgf)
R
T
MATERIAL:
Inch
Housing - Steel, Zinc Chromate

Isolator - Rubber
1
2
3
A10R 4-1505
A10R 4-1505
A10R 4-1504
A10R 4-1505
A10R 4-1505
Fig. 2
NATURAL FREQUENCY: 6 30 Hz
40
30
20
A10Z 4-1552A
10
0
.08
.04
.12
.16
.20
.24
50
40
30
20
10
0
A10Z 4-1552D
A10Z 4-1552A
5
40
A10Z 4-1553D
30
20
A10Z 4-1553A
10
0
.04
.08
.12
.16
.20
.24
50
40
30
20
10
0
14
15
16
Catalog Number
6
8
10
9
7
NATURAL FREQUENCY-Hz
Approximate Hardness
Durometer
Fig. 1
Fig. 2
A10Z 4-1552A
A10Z 4-1552D
30
60
A10Z 4-1553A
A10Z 4-1553D
30
60
8-44
25
20
A10Z 4-1553A
INCH COMPONENT
13
15
A10Z 4-1553D
DEFLECTION (in.)
12
10
NATURAL FREQUENCY-Hz
DEFLECTION (in.)
LOAD (lbf)
11
A10Z 4-1552D
LOAD (lbf)
LOAD (lbf)
10
A10R 4-1504
A10R 4-1504
Fig. 1
1-13/32
(35.7)
1-13/16
(46)
LOAD (lbf)
1-1/16
1-15/32 (27)
(37.3)
11
12
FINGER-FLEX MOUNTINGS TO 12 lbf

MATERIAL:
Inch
Rubber
T
1
2
3
60
LOAD (lbf)
1/4
5/64
LOAD
50
40
30
SUPPORT
8 FINGERS
EACH SIDE
OUT OF PHASE
13/16 29/64
20
10
0
5/64
.02
.04
A
.06 .08 .10 .12
DEFLECTION (in.)
.14
.16
Fig. 1 Ring Style
Deflection below the X are considered safe practice for

static loads; data above the X are useful for calculating
deflections under dynamic loads.
5/64
5/64
3/16
12
LOAD (lbf)
10
2
0
13/16 15/32 1/4
8 FINGERS
EACH SIDE
OUT OF PHASE
A
16
18
20
22
26
24
28
8 FINGERS
EACH SIDE
OUT OF PHASE
1/4
9/16
10
Fig. 2 Bushing Style
11
INCH COMPONENT
Catalog Number
Hardness
Durometer
Compression
Max.
Load
Fig. 1
Fig. 2
lbf

2400
2700
3000
3300
12
A10R
A10R
A10R
A10R
4-1500A
4-1500B
4-1500C
4-1500D
30
40
50
60
4
6
9
12
4
6
9
12
3
4
6
9
2
3
4
7
3
5
A10R
A10R
A10R
A10R
4-1501A
4-1501B
4-1501C
4-1501D
30
40
50
60
4
6
9
12
4
6
9
12
3
4
6
9
2
3
4
7
3
5
8-45
13
14
15
16

MATERIAL:
Natural Rubber
Inch
3
4
LOAD (lbf)
80
70
60
50
LOAD
40
30
20
SUPPORT
C
B
5
6
7/64
10
7/64
5/16
.04
.08
.12
.16
.20
DEFLECTION (in.)
Deflections below the X are considered safe practice for
0
10 FINGERS
EACH SIDE
OUT OF PHASE
1-11/64 51/64
Fig. 1 Ring Style

10 FINGERS
(12 on 1503B)
.193
1/16
35/64
24
20
LOAD (lbf)
12
8
14
16
18
17/32
A
12
3/8
12 FINGERS
EACH SIDE
OUT OF PHASE
1-11/64 11/16
16
20
22
24
10
11
INCH COMPONENT
Catalog Number
12
Fig. 2

1750
2000
2250
2500
2750
lbf
A10R
A10R
A10R
A10R
4-1502A
4-1502B
4-1502C
4-1502D
30
40
50
60
10
13
18
25
10
13
18
25
7
9
14
20
5
7
10
13
4
5
8
10
3
4
6
8
A10R
A10R
A10R
A10R
4-1503A
4-1503B
4-1503C
4-1503D
30
40
50
60
10
13
18
25
10
13
18
25
7
9
14
20
5
7
10
13
4
5
8
10
3
4
6
8
15
16
Compression
Max.
Load
Fig. 1
13
14
Hardness
Durometer
8-46

MATERIAL:
Inch
Natural Rubber
T
1
2
21/64
LOAD (lbf)
200
175
3/32
LOAD
150
125
100
75
D
C
SUPPORT
50
25
0
35
LOAD (lbf)
Fig. 1 Ring Style
3/32
25
5/16
20
1-3/8 11/16 3/8
15
10
5
12
14
3/32
30
20
22
24
16
18
4
5
.04
.08
.12
.16
.20
.24
DEFLECTION (in.)
12 FINGERS
EACH SIDE
OUT OF PHASE
1-3/8 3/4
A
3/32
12 FINGERS
EACH SIDE
OUT OF PHASE
26
12 FINGERS
EACH SIDE
OUT OF PHASE
21/64
8
9
21/32
10
INCH COMPONENT
Catalog Number
Hardness
Durometer
Compression
Max.
Load
Fig. 1
Fig. 2

2000
2250
2500
2750
3000
lbf
11
12
A10R
A10R
A10R
A10R
4-1504A
4-1504B
4-1504C
4-1504D
30
40
50
60
14
19
27
37
19
12
14
25
9
10
19
32
7
8
16
25
5
6
13
21
A10R
A10R
A10R
A10R
4-1505A
4-1505B
4-1505C
4-1505D
30
40
50
60
14
19
27
37
19
12
14
25
9
10
19
32
7
8
16
25
5
6
13
21
13
14
15
8-47
16

MATERIAL:
Inch
Natural Rubber
1
2
250
LOAD (lbf)
300
LOAD
200
150
SUPPORT
5/32
.05
.10
.15 .20 .25
DEFLECTION (in.)
80
70
.30
.35
Fig. 1 Ring Style
LOAD (lbf)
12 FINGERS
3/8
3/32
35/64
D
60
50
9/16
1-29/32 1-5/32
C
40
30
20
10
0
5/32
1/2

7
8
C
B
50
0
12 FINGERS
EACH SIDE
OUT OF PHASE
1-29/32 1-1/4
100
12 FINGERS
EACH SIDE
OUT OF PHASE
A
16
10
12
14
7/8
18
10
11
INCH COMPONENT
Hardness
Durometer
Compression
Max.
Load
A10R 4-1506A
A10R 4-1506B
A10R 4-1506C
A10R 4-1506D
30
40
50
60
35
50
65
80
30
50
17
24
40
76
13
18
31
56
10
14
24
43
8
12
20
33
A10R 4-1507A
A10R 4-1507B
A10R 4-1507C
A10R 4-1507D
30
40
50
60
35
50
65
80
30
50
17
24
40
76
13
18
31
56
10
14
24
43
8
12
20
33
Catalog Number
12
Fig. 1
13
Fig. 2
14
15
16
8-48

1500
1750
2000
2250
2500
lbf

MATERIAL:
Inch
Natural Rubber
T
1
LOAD (lbf)
800
700
LOAD
600
500
400
SUPPORT
100
0
.1
.2
.3
.4
.5
.6
.7
.8
5 FINGERS
ON OUTSIDE
OF SHAFT
350
13/32
7/32
32 30'
3 1-1/16 5/8
7/8 2-1/8
300
250
LOAD (lbf)
5/8
1/8
13/16
Fig. 1 Ring Style
DEFLECTION (in.)
Deflections below the X are considered safe practice
for static loads; data above the X are useful for
calculating deflections under dynamic loads.
200
11/16
15/32
150
1-25/32
100
50
0
1-1/4
2-3/16
300
200
10
8
9
11
10
INCH COMPONENT
Hardness
Durometer
Compression
Max.
Load
A10R 4-1508C
A10R 4-1508D
50
60
250
350
250
324
178
242
105
141
65
93
48
66
A10R
A10R
A10R
A10R
30
40
50
60
120
160
250
350
160
250
324
98
104
178
242
46
67
105
141
30
46
65
93
22
34
48
66
Catalog Number
Fig. 1
Fig. 2
4-1509A
4-1509B
4-1509C
4-1509D
lbf

900
1000
1250
1500
11
1750
12
13
14
15
8-49
16

R
T
MATERIAL:

Base - Steel, Zinc Plated
Inch
1
2
3
150
Maximum Recommended
1-15/16
DK
100
DD
LOAD (lbf)
1/4 - 20 UNC TAP

5/8 DP
X
2-3/8
CC
50
BB
AA
13/64
7
0
.05
.10
1.50
.19
DEFLECTION (in.)
.67
1.13
1.44
10
SECTION X-X
.035
11
12
13
14
INCH COMPONENT
Catalog Number
1600
1750
33
42
62
90
135
33
42
62
90
135
27
34
51
74
114
lbf
A10Z40-1240AA
A10Z40-1240BB
A10Z40-1240CC
A10Z40-1240DD
A10Z40-1240DK
15
16
Maximum
Load
8-50
2000
2500
3000
3500
4000

22
28
42
60
93
14
18
27
39
60
10
13
19
28
43
7
9
14
20
30
6
7
11
16
24
BASE MOUNTINGS TO 10 lbf (4.6 kgf)

INCH OR METRIC THREADS
FOR LOADS OF .5 TO 10 lbf (0.25 TO 4.6 kgf)
STAINLESS STEEL MESH
CORROSIVE ENVIRONMENT
R
Inch
MATERIAL:
Housing - Aluminum Alloy, Anodized

Eyelets - Brass, Tin Plated
Isolators - Stainless Steel Spring and Mesh
T
1
-94F to +347F (-70C to +175C)
APPLICATIONS:
Aircraft
Marine
Mobile
Rotating Machines
ACROSS FLATS
.56 (14.2)
Ratio between transverse and axial stiffness

(vertical) approximately 1:2.5
Natural frequency = 7 to 11 Hz vertical and
4.5 to 7 Hz transverse depending on load, for
a displacement input .014 (0.35).
Maximum displacement input .016 (0.4)
Transmissibility 4:1
Conforms to MIL-E-5400
LOADING LIMITATIONS:
Prior to abutting snubber, load corresponding
to a continuous acceleration of at least 2 G.
Loads corresponding to at least 10 G may be
accepted without subsequently affecting the
mount performance. Maximum displacement of
the suspended unit under limiting loads .197 (5).
1-45/64
(43.3)
TYP
#8-32 UNC-2B
(SUFFIX A)
M4 x 0.7 (SUFFIX B)
.27 (7) DEEP
1.378
(35)
TYP
6
7
4 HOLES
.165 (4.2)
TYPICAL TRANSMISSIBILITY CURVE

as a function of applied load
TRANSMISSIBILITY
1.4 oz. (0.04 kg) approx.
INCH COMPONENT
CATALOG NUMBER
A10Z19-701 S
Load Code
Cap Code
Thread
A #8-32 UNC-2B
B M4 x 0.7
Static Load
NOTE: MAX BOLT LENGTH INTO CAP IS .276 (7)
WEIGHT:
1
2
3
4
5
1.62 (41.1)
5/32 (4)
59/64 (23.5)
1.58 (40.1)
H*
DYNAMIC CHARACTERISTICS:
Load
Code
.15 (3.8)
RADIAL DEFLECTION
lbf
kgf
.55 1.00
.80 1.80
1.50 3.40
2.20 5.60
5.60 10.10
0.25 0.45
0.35 0.8
0.7 1.5
1 2.55
2.55 4.6
Cap
Code
S Short
L Long
5
4.5
4
3.5
3
2.5
2
1.5
1
0.5
0
9
10
MIN LOAD
MAX LOAD
11
20 30 40 50
3 4 5 8 10
FREQUENCY (Hz)
Free
mm
38
41
12
13
H* - Height
in.
1.50
1.61
100
Max. Load
in.
1.09
1.21
14
mm
27.7
30.7
15
8-51
16
ENDUR-C BASE MOUNTINGS TO 75 lbf

FOR LOADS OF 15 TO 75 lbf (6.8 to 34 kgf)
R
T
MATERIAL:
Inch
Housing, Cores & Base - Anodized Aluminum

Isolators - ENDUR-C elastomer
0F to +150F (-18C to +66C)
FEATURES:
Low Cost.
Oil-Resistant.
INSTALLATION:
4
5
6
Cores accept standard bolt sizes. Eyelets accept

standard mounting hardware. Thread size: #8-32 (standard).
Natural Frequency Range: 12 30 Hz
.38 (9.7)
LOAD vs. DEFLECTION
30
% DEFLECTION
.125 (3.2) RADIAL DISPLACEMENT
25
20
15
1.25 (31.8) FREE HEIGHT

1.15 (29.2) UNDER MAX. LOAD
LOAD RANGE No.

8815
8820
10
.93
(23.6)
5
0
20
40
60
80
100
120
WEIGHT (lb.)
50
40
10
WEIGHT (lb.)
.197 (5)
LOAD vs. FREQUENCY
#8-32, UNC,
x 0.5 (12.7) DEEP
LOAD RANGE No.

8815
8820
30
1.38 (35.1)
20
1.70 (43.2)
11
10
12
13
14
15
16
10
20
30
40
INCH COMPONENT
Catalog Number *
Load
Range
Number
lbf
kgf
oz.
A10Z50-8815
A10Z50-8820
8815
8820
15 40
30 75
6.8 18.1
13.6 34
1.25
1.25
35.4
35.4
8-52
Load Rating
Approx. Weight
ENDUR-C BASE MOUNTINGS TO 200 lbf

FOR LOADS OF 45 TO 200 lbf (20.4 to 90.7 kgf)
MATERIAL:
Inch
Housing, Cores & Base - Anodized Aluminum

Isolators - ENDUR-C elastomer
0F to +150F (-18C to +66C)
FEATURES:
Low Cost
Oil-Resistant
INSTALLATION:
Cores accept standard bolt sizes. Eyelets accept

standard mounting hardware. Thread size: 3/8 -16 (standard)
Natural Frequency Range: 12 30 Hz

.63 (16)
LOAD vs. DEFLECTION
30
.15 (3.8) RADIAL DISPLACEMENT
% DEFLECTION
25
20
15
1.78 (45.2) FRESS HEIGHT

1.64 (41.7) UNDER MAX. LOAD
10
0
1.40
(35.6)
LOAD RANGE No.
8845
50
100 150 200 250 300 350 400

WEIGHT (lb.)
7
.197 (5)
LOAD vs. FREQUENCY
100
3/8-16, UNC,
x 0.88 (22.4) DEEP
LOAD RANGE No.

8845
WEIGHT (lb.)
80
60
10
1.94 (49.3)
2.38 (60.5)
40
11
20
12
0
10
20
30
40
13
INCH COMPONENT
Catalog Number *
A10Z51-8845
Load Rating
Approx. Weight
lbf
kgf
oz.
45 200
20.4 90.7
3.9
110
8-53
14
15
16
I
R
T
1
BASE MOUNTINGS TO 242 lbf (110 kgf)

FOR LOADS OF 1.5 TO 242 lbf (0.7 TO 110 kgf)
Inch
MATERIAL:
Housing - Aluminum Alloy, Anodized

Isolators - Stainless Steel Spring and Mesh
1.18 (30)
3
4
5
6
7
8
9
10
UNLOADED* 1.57 (40)

LOADED 1.38 (35)
-94F to +347F (-70C to +175C)
.205 (5.2)
RADIAL
DISPLACEMENT
APPLICATIONS:
Aircraft
Marine
Mobile
Rotating Machines
2-1/4 (57.3)
1-3/16 (30)
In accordance with curve 1 of spec MIL-C-172.

Ratio Between transverse and axial stiffness
(vertical): approximately 1:2.5
Natural Frequency = 7 to 10 Hz vertical and
4.5 to 6 Hz transverse depending on load for a
displacement input of .303 (0.75)
Maximum displacement input .031 (0.8)
Transmissibility: 4:1
Conforms to MIL-E-5400C
WEIGHT:
3.53 to 4.41 oz. (100 to 125 g) approx.

* Long Cap, unloaded height 1.76 (44.6) loaded
height 1.57 (40) available on special request.
To order with long cap, add L to the end of
Catalog Number.
NOTE:
MAX. ATTACHING BOLT
LENGTH INTO CAPS .275 (7)
1/4-20 UNC-2B
1/4-28 UNF-2B
M6
3/8-24 UNF-2B
(SUFFIX A)
(SUFFIX B)
(SUFFIX C)
(SUFFIX D)
4 HOLES
.197 (5)
LOADING LIMITATIONS:
Just prior to abutting snubber, load corresponding

to a continuous acceleration of at least 2 G.
Loads corresponding to at least 10 G may be
accepted without subsequently affecting the
mount performance. Maximum displacement of
the suspended unit under limiting loads .236 (6)
11/64 (4.5)
2-3/8 (60.5)
1.94 (49.2)

4
TRANSMISSIBILITY
11
MIN. LOAD
MAX. LOAD
3
2
1
0
100
10
FREQUENCY (Hz)
INCH/METRIC COMPONENT
12
13
14
15
16
Catalog Number Catalog Number Catalog Number Catalog Number

1/4-20 UNC-2B 1/4-28 UNF-2B
M6
3/8-24 UNF-2B
A10Z22-7201A
A10Z22-7202A
A10Z22-7203A
A10Z22-7204A
A10Z22-7205A
A10Z22-7206A
A10Z22-7207A
A10Z22-7209A
A10Z22-7210A
A10Z22-7211A
A10Z22-7212A
8-54
A10Z22-7201B
A10Z22-7202B
A10Z22-7203B
A10Z22-7204B
A10Z22-7205B
A10Z22-7206B
A10Z22-7207B
A10Z22-7209B
A10Z22-7210B
A10Z22-7211B
A10Z22-7212B
A10Z22M7201C
A10Z22M7202C
A10Z22M7203C
A10Z22M7204C
A10Z22M7205C
A10Z22M7206C
A10Z22M7207C
A10Z22M7209C
A10Z22M7210C
A10Z22M7211C
A10Z22M7212C
A10Z22-7205D
A10Z22-7207D
A10Z22-7210D
A10Z22-7211D
A10Z22-7212D
Static Load
lbf
1.55 2.75
2.55 5.00
4.40 9.90
6.20 12.35
9.90 19.85
15.40 30.85
17.65 39.70
35.30 48.50
44.10 72.75
72.75 132.30
132.28 242.51
kgf
0.7 1.25
1.15 2.3

2 4.5
2.8 5.6
4.5 9

7 14

8 18
16 22
20 33
33 60
60 110
STEEL SPRING & PAD MOUNTS TO 4.4 lbf

STAINLESS STEEL PADS
FOR LOADS OF .24 TO 4.4 lbf (0.11 TO 2 kgf)
R
Inch
MATERIAL:
Mounting Base - Aluminum Alloy, Anodized

Retaining Caps - Aluminum Alloy, Anodized
Center Tube - Stainless Steel
Isolators - Knitted Stainless Steel Pads
.97
(24.6)
-94F to +347F (-70C to +175C)

H
APPLICATIONS:
Light Electronics & Mechanical Equipment
High Frequency Environments
1.02
(26)
LOAD LIMITATIONS:
Mechanical resistance is equal to
10 G of continuous acceleration.
2
3
1/16
(1.6)
NOTE: MAX. BOLT LENGTH INTO CAP IS .275 (7)
Natural frequency = 15 to 25 Hz vertical
= 12 to 20 Hz radial
Allowable max. movement on mount = .012 (0.3)
Transmissibility between 3 and 4:1
TRANSMISSIBILITY
1.42
(36)
6
7
MIN. LOAD
4 HOLES
.146 (3.7)
MAX. LOAD
.205 (5.2)
THRU HOLE
1.26
1
(32) (25.4)

4

2
1
0
10
20 30
50
FREQUENCY (Hz)
10
100
11
INCH COMPONENT
Catalog Number
A10Z36-7001S02
A10Z36-7001S04
A10Z36-7001S07
A10Z36-7001S22
A10Z36-7001S26
Static Load
lbf
.24 .55
.44 .88
.77 1.65
2.20 3.41
2.64 4.40
kgf
0.11 0.25
0.20 0.40
0.35 0.75
1.00 1.55
1.20 2.00
H Height
Min. (Comp.)
in.
.354
.354
.354
.354
.354
mm
9
9
9
9
9
Max. (Tension)
in.
.59
.59
.59
.59
.59
mm
15
15
15
15
15
12
13
14
15
8-55
16
I
R
COMPRESSION BASE MOUNTINGS

Inch
MATERIAL:
T
1
Cap and Base - Aluminum Alloy

Center Stud - Aluminum Alloy
Isolator - Knitted Stainless Steel Mesh
FINISH:
Alochrome 1200 on all Aluminum components
APPLICATIONS:
2
3
4
Lightweight machine tools.

Printing and textile machinery.
CHARACTERISTICS:
Although normally intended to be used in compression, they

will accept accidental tensile loads. The mountings should
be fixed to the floor for loads in excess of 220 lbf or when
working conditions require it. They will accept compressive
loads at least five times the static load.
3 (76.2)
2.50 (63.5)
3/8-16 UNC-2B
6
7
4 HOLES
.295 (7.5)
8
1-13/32 (35.7)
10
11
12
INCH COMPONENT
Catalog Number
13
14
A10Z28-1641
A10Z28-1642
A10Z28-1643
A10Z28-1644
A10Z28-1645
A10Z28-1646
15
16
8-56
Static Load
lbf
10 20
20 50
50 100
100 200
200 500
500 1000
Natural
Frequency
Hz
kgf
4.55 9.05
9.05 22.50
13 17
22.50 45.35
For an
45.35 90.70 amplitude of
90.70 226.80 .012 (0.3)
226.80 453.50
Weight
oz.
6.33
6.33
6.33
6.33
6.33
6.33
kg
0.18
0.18
0.18
0.18
0.18
0.18
H - Height
Free
in.
1.91
1.91
1.91
1.91
1.91
1.91
Max. Load
mm
48.6
48.6
48.6
48.6
48.6
48.6
in.
1.44
1.44
1.44
1.44
1.44
1.44
mm
36.6
36.6
36.6
36.6
36.6
36.6
GENERAL PURPOSE HEAVY-DUTY BASE MOUNTINGS

FOR LOADS OF 77 TO 1598 lbf (35 TO 725 kgf)
R
Inch
MATERIAL:
Housing - Machined Casting

Center and Cup Washer are
Zinc Plated and Gold Passivated Mild Steel
Isolators - Stainless Steel Mesh
T
1
-94F to +347F (-70C to +175C)
APPLICATIONS:
Primarily developed for heavy-duty applications

where severe shock forces are encountered,
this mounting is especially recommended for
vehicle and marine installation where there is
high starting torque or a reversal of loads.
It is capable of withstanding compression loads
as high as ten times the static loads and is used
for isolating marine fans, mobile engines,
generators, instrument consoles and general
machine tools, such as lathes, milling machines,
slotters, broachers, etc.
An access hole is provided to be able to pin

the center section for assembling the mounting bolt
or to remove rusted bolt.
8000
3
4
4 HOLES
.323 (8.2)
3.27
(83)
2.44
(62)
5/8-11 UNC-2B
or
M16 x 2.0
5
6
7
LOAD
INCREASING
LOAD
6000
LOAD (lbf)
DECREASING
4000
2000
0
.05
.1
.15
10
11
.2
DEFLECTION (in.)
12
INCH COMPONENT METRIC COMPONENT

Catalog Number
5/8-11 UNC-2B
Catalog Number
M16 x 2.0
A10Z27-3021A
A10Z27-3022A
A10Z27-3023A
A10Z27M3021C
A10Z27M3022C
A10Z27M3023C
Static Load
lbf
kgf
77 396 35 180
308 793 140 360
606 1598 275 725
Natural
Frequency
H - Height
Hz
Free
Loaded
14 22
14 22
14 22
1-31/32
(50)
1-13/16
(46)
13
14
15
8-57
16
I
R
T
1
HEAVY-DUTY BASE MOUNTINGS TO 20000 lbf

FOR COMPRESSION LOADS OF 1000 TO 20000 lbf PHONE: 516.328.3300 FAX: 516.326.8827 WWW.SDP-SI.COM
(453 TO 9072 kgf)
FREESTANDING
Inch
0
1
MATERIAL:
Mounting Plates - Mild Steel, Painted

Isolators - Knitted Stainless Steel Mesh
APPLICATIONS:
2
3
4
5
Designed principally for heavy-duty punch

and panel presses.
Large machine tools
Rock crushers
FLOOR MOUNTING:
To support heavy loads, the mountings

are grouped together on a spreader plate.
The spreader plate should be made the
same size as the floor bearing area of the
base. Fasten the mountings to the spreader
plate by the 5/8 tapped hole provided, then
fasten the spreader to the machine base.
6-1/2 (165.1)
2.618 (66.5)
EXAMPLE:
Total Weight of Machine = 65 TONS
Machine Weight
65
= 7.22 (use 8 mounts)
=
Capacity of Mounting
9
5/8-11 UNC-2B
1-7/64
(28.4)
FREE
15/16
(23.9)
LOADED
8
SECTION X-X
3/4
(19.1)
10
11
MACHINE
BASE
12
INCH COMPONENT
13
14
15
16
Catalog Number
A10Z33-1133-1
A10Z33-1133-2
A10Z33-1133-3
A10Z33-1133-4
8-58
SPREADER
PLATE
Static Load Range

lbf
1000 2000
2000 5000
5000 10000
10000 20000
kgf
453 907
907 2268
2268 4536
4536 9072
MUST BE FREESTANDING
ON FLOOR OR FOUNDATION
SQUARE PLATE SPRING SUSPENSION MOUNTS

ALL METAL
MATERIAL:
Mounting Plates - Steel, Zinc Plated

Springs - Spring Steel Wire
Inch
-76F to +302F (-60C to +150C)
EXAMPLE:
A10C16-MS198210 is a mount
suitable for 10 lbf load.
Deflection curve for mounts with other

load ratings may be drawn by shifting
the curve shown to pass through a point
defined by the intersection of the mounts
nominal load (lbf) with a standard
deflection of .06 inches.
LOAD (lbf)
Part & Load

Rating Code
(see table)
26
24
22
20
18
16
14
12
10
8
6
4
2
0
Weight
Duty
Rating
Part & Load

Rating Code
lbf
kgf
oz.
kg
197501
197602
197703
203704
1
2
3
4
0.45
0.91
1.36
1.81
.38
.38
.38
.38
0.011
0.011
0.011
0.011
197802
197904
198006
198108
198210
198312
371114
2
4
6
8
10
12
14
0.91
1.81
2.72
3.63
4.54
5.44
6.35
1.14
1.14
1.14
1.14
1.14
1.14
1.14
0.033
0.033
0.033
0.033
0.033
0.033
0.033
198410
198515
198620
198725
198830
198935
10
15
20
25
30
35
4.54
6.8
9.07
11.34
13.61
15.88
3.01
3.01
3.01
3.01
3.01
3.01
0.086
0.086
0.086
0.086
0.086
0.086
INCH COMPONENT
CATALOG NUMBER
A10C16- S
Nominal
Load
MAX.
AXIAL (J)
DISPLACEMENT
Duty Rating
Light-Duty
L
Medium-Duty M
Heavy-Duty H
MAX. RADIAL (K)

DISPLACEMENT
4
5
STATIC LOAD DEFLECTION CURVE

AXIAL
RADIAL
6
7
.02
.04
.06
.08 .10 .12

DEFLECTION (in.)
.14
.16
.18
.20
Duty-Rating
Dim.
A
B
C
D
E
F
J
K
L
in.
7/8
1-1/4
1
.17
.14
9/32
5/32
1/8
in.
mm
in.
mm
mm
22.23 1-1/4 31.75 1-3/4 44.45
31.75 1-25/32 45.25 2-5/16 54.77
25.4
1-3/8 34.93 1-3/4 44.45
6.53
9.93
4.22
.39
.26
4.98
4.22
3.56
.2
.17
7.14 23/64
9.13 17/32 13.5
6.35
3.97
4.76
3/16
1/4
4.76
4.76 3/16
3.18
3/16
10
11
12
13
14
15
NOTE: Curves shown for mounts with a nominal load rating of 6 lbf.
8-59
16
PEDESTAL SPRING SUSPENSION MOUNTS

ALL METAL
R
T
MATERIAL:

Inch
-76F to +302F (-60C to +150C)
1
2
3
EXAMPLE:
A10C17-HP235625 is a mount
MAX. RADIAL (K)
DISPLACEMENT
Deflection curve for mounts with

other load ratings may be drawn
by shifting the curve shown to pass
through a point defined by the
intersection of the mounts nominal
load (lbf) with a standard
G
A
9
10
11
LOAD (lbf)
INCH COMPONENT
CATALOG NUMBER
A10C17- P
Duty Rating
Light-Duty
L
Medium-Duty M
Heavy-Duty H
Duty
Rating
Part & Load

Rating Code
Part & Load

Rating Code
(see table)
Nominal
Load
26
24
22
20
18
16
14
12
10
8
6
4
2
0
Weight
kgf
oz.
kg
199301
199402
199503
199604
1
2
3
4
0.45
0.91
1.36
1.81
.71
.71
.71
.71
0.021
0.021
0.021
0.021
199702
199804
199906
235008
235110
235212
370914
2
4
6
8
10
12
14
0.91
1.81
2.72
3.63
4.54
5.44
6.35
2.05
2.05
2.05
2.05
2.05
2.05
2.05
0.061
0.061
0.061
0.061
0.061
0.061
0.061
235310
235415
235520
235625
235730
371035
10
15
20
25
30
35
4.54
6.8
9.07
11.34
13.61
15.88
4.90
4.90
4.90
4.90
4.90
4.90
0.138
0.138
0.138
0.138
0.138
0.138
13
14
15
MAX.
AXIAL (J)
DISPLACEMENT
AXIAL
RADIAL
.02
.04
8-60
.08
.10
.12
.14
.16
.18
.20
Duty-Rating
Dim.
16
.06
DEFLECTION (in.)
lbf
12
B
C
A
B
C
D
E
F
G
H
J
K
L
in.
7/8
1-11/16
1-3/8
.170
.150
15/64
9/16
1-9/16
5/32
1/8
M
mm
in.
mm
22.23 1-1/4 31.75
42.85 2-3/8 60.33
34.93 1-15/16 49.2
6.53
4.22 .257
4.98
3.73 .196
5.95 21/64
8.33
14.29 13/16 20.64
39.67 2-25/32 70.64
4.76
3.97 3/16
4.76
3.18 3/16
H
in.
1-3/4
3.0
2-1/2
.39
.26
31/64
1-3/32
2-3/4
1/4
3/16
mm
44.45
76.2
63.5
9.93
6.53
12.3
29.37
69.85
6.35
4.76
SINGLE HOLE SPRING SUSPENSION MOUNTS

ALL METAL
MATERIAL:

Inch
-76F to +302F (-60C to +150C)
EXAMPLE:
A10C18-LF237102 is a mount
Deflection curve for mounts with other

load ratings may be drawn by shifting
the curve shown to pass through a point
defined by the intersection of the mounts
nominal load (lbf) with a standard
MAX. AXIAL (F)

DISPLACEMENT
MAX. RADIAL (G)

DISPLACEMENT
LOAD (lbf)
INCH COMPONENT
CATALOG NUMBER
A10C18- F
Duty Rating
Light-Duty
L
Medium-Duty M
Heavy-Duty H
Duty Part & Load

Rating Rating Code
Part & Load

Rating Code
(see table)
Nominal
Load
26
24
22
20
18
16
14
12
10
8
6
4
2
0
D
AXIAL
RADIAL
7
8
.02
.04
.06
.08
.10
.12
.14
.16
.18
.20
DEFLECTION (in.)
Weight
lbf
kgf
oz.
kg
237001
237102
237203
237304
1
2
3
4
0.45
0.91
1.36
1.81
.93
.93
.93
.93
0.026
0.026
0.026
0.026
237402
237504
237606
237708
237810
237912
2
4
6
8
10
12
0.91
1.81
2.72
3.63
4.54
5.44
2.71
2.71
2.71
2.71
2.71
2.71
0.076
0.076
0.076
0.076
0.076
0.076
238210
238315
238420
238525
238630
371235
10
15
20
25
30
35
4.54
6.8
9.07
11.34
13.61
15.88
6.47
6.47
6.47
6.47
6.47
6.47
0.182
0.182
0.182
0.182
0.182
0.182
Duty-Rating
Dim.
A
B
C
D
E
F
G
in.
mm
in.
3/8
9.53
1/2
1-19/64 32.94 1-7/8
3/8
9.53
1/2
1/4 BSF
#4 BA
1-3/32 27.78 1-21/64
5/32
3.97 3/16
1/8
3.18 3/16
H
in.
mm
12.7
11/16
47.63 2-9/16
12.7
27/32
3/8 BSF
33.73 1-54/64
4.76
1/4
4.76 3/16
mm
17.46
61.91
21.43
45.64
6.35
4.76
10
11
12
13
14
15
8-61
16
SPRING MOUNTS ELLIPTIC LEAF TYPE

NATO APPROVED NAVAL "X" MOUNTS
R
T
MATERIAL:
Leaves - 304 Stainless Steel

Washers - Nylon and Stainless Steel
Damping Compound - Polymer
Inch
1
2
+50F to +86F (+10C to +30C)

VIBRATION MODES:
VERTICAL:
HORIZONTAL 1:
L
HEIGHT UNDER
NOMINAL LOAD
HORIZONTAL 2:
5
W
UNLOADED HEIGHT
MOUNTING
HARDWARE
DETAIL
7
8
9
10
NATO APPROVED NAVAL XM MOUNTS

FOR EXTREME ENVIRONMENTAL CONDITIONS
MATERIAL:

Damping Compound - Stainless Steel Mesh
+238F to +752F (-150C to +400C)
11
D
12
13
H h
SPRING
ASSY.
BUSHING
14
15
16
8-62
d
L
WASHER
SPRING MOUNTS ELLIPTIC LEAF TYPE

NATO APPROVED NAVAL "X" and "XM" MOUNTS PHONE: 516.328.3300 FAX: 516.326.8827 WWW.SDP-SI.COM
NATO Stock Numbers listed for "X" Mounts

NATO Stock Numbers not available for "XM" Mounts
Inch
Dimensions in ( ) are mm.
INCH COMPONENT
Catalog Number
X Mounts
Catalog Number
XM Mounts
Nominal
Load
A10Y15-57170025
A10Y15-57180050
A10Y15-57190100
A10Y15-57200150
A10Y15-57210250
A10Y15-84290400
A10Y15-84280700
A10Y15-84271000
5340-99-923-5717
5340-99-923-5718
5340-99-923-5719
5340-99-923-5720
5340-99-923-5721
5340-99-520-8429
5340-99-520-8428
5340-99-520-8427
A10Y15-5717M0025
A10Y15-5718M0050
A10Y15-5719M0100
A10Y15-5720M0150
A10Y15-5721M0250
A10Y15-8429M0400
A10Y15-8428M0700
A10Y15-8427M1000
22 (10)
44 (20)
99 (45)
154 (70)
242 (110)
397 (180)
705 (320)
992 (450)
A10Y15-5717...
A10Y15-5718...
A10Y15-5719...
A10Y15-5720...
A10Y15-5721...
A10Y15-8429...
A10Y15-8428...
A10Y15-8427...
Load Range
kgf
lbf
lbf (kgf)
20 40
40 77
77 121
121 198
198 298
298 551
551 838
838 1212
9 18
18 35
35 55
55 90
90 135
135 250
250 380
380 550
H Height
h Height
d Dia. Bolt Size
W
With Loaded with D Dia. Bolt Hole UNF in.
Width Unloaded
Washers
Washers
Washers
(nearest
in. (mm)
in. (mm) in. (mm)
in. (mm)
metric)
in. (mm)
L
Length
8 (203)
8 (203)
8.5 (216)
8.5 (216)
11.7 (297)
11.7 (297)
11.7 (297)
11.7 (297)
Catalog Number
(Ref.)
Weight
A10Y15-5717...
A10Y15-5718...
A10Y15-5719...
A10Y15-5720...
A10Y15-5721...
A10Y15-8429...
A10Y15-8428...
A10Y15-8427...
1.5 (0.68)
1.75 (0.8)
2.25 (1.02)
2.5 (1.13)
2.75 (1.25)
13 (5.9)
14.5 (6.58)
16 (7.26)
lb. (kg)
2 (51)
2 (51)
2 (51)
2 (51)
4 (102)
4 (102)
4 (102)
4 (102)
in. (mm)
4.21 (107)
4.17 (106)
4.88 (124)
4.88 (124)
4.8 (122)
7.28 (185)
7.32 (186)
7.24 (184)
4.5 (114)
4.5 (114)
5.25 (133)
5.25 (133)
7.5 (190)
7.5 (190)
7.5 (190)
7.5 (190)
Static Stiffness
Vertical
Horizontal 1
lbf / in.
lbf / in.
(kgf / cm)
(kgf / cm)
75 (13.39)
40 (7.14)
150 (26.79)
80 (14.29)
250 (44.65) 135 (24.11)
400 (71.43) 220 (39.29)
650 (116.08) 350 (62.5)
2300 (410.74) 620 (110.72)
3000 (535.75) 760 (135.72)
4800 (857.2) 1100 (196.44)
Horizontal 2
lbf / in.
(kgf / cm)
100 (17.88)
200 (35.72)
330 (58.93)
520 (92.86)
850 (151.8)
3070 (548.25)
2700 (482.17)
4000 (714.33)
T
1
INCH COMPONENT
NATO Stock Number
X Mounts
(Ref.)
Catalog Number
(Ref.)
1.25 (31.75)
1.25 (31.75)
1.25 (31.75)
1.25 (31.75)
1.25 (31.75)
2.5 (63.5)
2.5 (63.5)
2.5 (63.5)
.354 (9)
.354 (9)
.512 (13)
.512 (13)
.512 (13)
.827 (21)
.827 (21)
.827 (21)
5/16 (8)
5/16 (8)
1/2 (12)
1/2 (12)
1/2 (12)
3/4 (20)
3/4 (20)
3/4 (20)
Natural Frequencies
Vertical
Hz
7.5
7.5
7.5
7.5
7.5
10.5
7.5
7.5
Horizontal 1 Horizontal 2
Hz
Hz
4.5
4.5
4.5
4.5
4.5
4.5
4.0
4.0
5.5
5.5
5.5
5.5
5.5
5.5
5.0
5.0
2
3
4
5
6
7
8
9
10
11
12
13
14
15
8-63
16
ELLIPTIC LEAF SPRING MOUNTING (NAVAL X TYPE)

R
T
1
2
3
4
5
This type of vibration and shock isolator was designed specifically for shipboard or mobile
applications. They are particularly suitable to protect delicate shipboard equipment from shock due
to underwater explosions or sudden stoppage of vehicles for vehicle mounted equipment.
Inch
All materials used are impervious to corrosion and will operate efficiently under a wide range
0
1
of temperature, making the units well-suited for naval or aircraft applications. Their basic design
employs two or more high-tensile stainless steel "U" formed leaves, situated at each end, forming
an elliptical shape when joined together in the center portion with face plates. The spaces between
the "U" formed leaves are filled with a specially developed polymer or stainless steel mesh.
Nonmetallic collars backed by stainless steel washers are supplied for load attachment, while providing noise reduction.
Inch size or metric size bolts may be used for fastening of the equipment to the base or foundation.
Low transmitted shock accelerations are obtained by combining large permitted static deflection in every direction
with a high energy loss within the mount. The high damping efficiency is obtained by the polymer which has a very low
static stiffness. The load bearing characteristics are determined by the metal construction of the mountings. These mounts
may be used in tension as well as compression.
The "X" Mount is one of those rare breeds which gives both vibration isolation and shock protection. Its low frequency
ensures effective vibration isolation, except where the resonant frequency of the surrounding structure may be sympathetic
with the mount's natural frequency. Similarly, care must be taken during transportation of equipment supported by "X"
Mounts.
The main disadvantage of the mount is that transmissibility at resonance is high. In most applications this is not critical
as the "X" Mounts are placed in areas that do not coincide with its resonant frequency. This special applications mount
may be of particular interest not only for its improved vibration performance at low temperature, but also its lower natural
frequency at room temperatures. This may avoid the need of trying to reduce the natural frequency by means of adding
a rubber washer in tandem, as this procedure also increases the transmissibility at resonance of the system.
Shock protection of the new design has the added benefit of durability under repeated shocks at low temperatures.
INSTALLATION OF "X" MOUNTS
6
7
8
9
10
11
12
Due to the sophisticated nature of the "X" Mounts, it is essential that they be correctly loaded. Incorrect loading will
mean inadequate shock protection (this is true even in underloaded situations).
Bad Practice
Due to the shape and size of the "X" Mount, there is a strong tendency to use the space created as storage. Needless
to say, any such placement can render the shock protection useless.
Preferred Systems
Mounts supporting the system underneath only, with the center of gravity in the lower third of the unit, is preferred.
When this is impossible, a fully suspended method should be used. Top steadies can be used where it is difficult to choose
mounts to support the weight using a fully suspended configuration.
The practice of combining units on one raft is often carried out to ensure that a suitable loading is obtained. This
practice is especially important for operator-controlled equipment; the seat can be mounted on the raft as well.
Orientation
Where possible, the horizontal roll axis should be fore and aft, to minimize equipment movement due to ship roll, but
any orientation is acceptable for shock protection. It is advisable to place mounts on any one piece of equipment in the
same direction.
TYPICAL APPLICATIONS INCLUDE:
Heavy Machine Tools

Air Compressors
Engine Suspension
Machine Mounting
Machine Craft Installations
Laboratory Equipment
Electric Motors
Factory Test Gear
Seat Suspension in Aircraft and Vehicles
13
14
15
16
8-64
Radar Communications Equipment

Electronic Control Equipment
Equipment Mountings in Tanks and Other Military Vehicles
Bomb and Other Lifting Gear
Refrigeration Compressors
Mobile Vehicles
Fuel Tanks
Blowers and Fans
Pumps
SPRING MOUNT ELLIPTIC LEAF TYPE

NATO APPROVED NAVAL X MOUNTS
LIGHTWEIGHT
R
Inch
MATERIAL:

Damping Compound - Polymer
T
1
+50F to +86F (+10C to +30C)
FEATURES:
The 13.2 lbf (6 kgf) Mount is designed to isolate lightweight

equipment (i.e. computers, printers, electronics panels, etc.)
from shock and vibration and has similar properties to the
present range of X mounts with some reduction in the
available deflection under shock conditions.
2
3
VIBRATION MODES:
VERTICAL:
M8 BOLT
HEIGHT UNDER
NOMINAL LOAD
HORIZONTAL 1:
4
5
3.23
(82)
HORIZONTAL 2:
2.87
(73)
.33 (8.5)
.98
(25)
UNLOADED
HEIGHT
.79 (20)
5.27
(134)
INCH COMPONENT
Catalog Number
Nominal
Load
Bolt Size UNF
lbf (kgf)
lbf (kgf)
in.
(nearest metric)
Weight
Excluding Bolt
*A10Y15-39210013
13.2 (6)
8.8 13.2 (4 6)
5/16 (8)
.29 (0.13)
Catalog Number
(Ref.)
A10Y15-39210013
Load
Range
Static Stiffness
Vertical
lbf / in.
(kgf / cm)
33 (5.91)
Horizontal 1
lbf / in.
(kgf / cm)
43 (7.68)
Horizontal 2
lbf / in.
(kgf / cm)
18 (3.25)
lb. (kg)
Natural Frequencies
Vertical
Hz
Horizontal 1
Hz
Horizontal 2
Hz
7.2 8.9
8.3 10.1
5.4 6.6
* NATO Stock Number: 5340-99-665-3921
10
11
12
13
14
15
8-65
16
ELLIPTIC LEAF SPRING MOUNT TEST DATA

TRANSMISSIBILITY / TEMPERATURE / RESONANCE:

Inch
Temp C
41.6
29.9
19.7
10.2
0.5
16.1
a
b
c
d
e
f
1
2
10.0
20
3.0
10
1.0
0
dB
0.3
0.1
-10
-30
f
e
d
c
-40
-20
a
5 6 7
10
20
30
50
Impressed frequency (Hz)
"Q" / TEMPERATURE
20
8
9
Q
10.2
6.1
2.8
2.2
4.0
22.7
30
3
4
fn (Hz)
6.2
6.6
7.6
13.0
22.0
29.6
"Q" =
Real Stiffness
Complex Stiffness
"Q" / Factor
10
10
-40
-30
-20
-10
10
20
30
40
TEMPERATURE C
11
NATURAL FREQUENCY / TEMPERATURE

30
12
Natural Frequency
20
13
10
14
-40
-30
-10
10
TEMPERATURE C
15
16
-20
8-66
20
30
40
100
DAMPED SPRING MOUNTINGS TO 200 lbf

R
Inch
MATERIAL:
Base Plate - Mild Steel, Painted

Spring - High-Tensile Steel, Phosphated, Dyed Black
End Cap - Cast Light Alloy
T
1
-94F to +347F (-70C to +175C)
APPLICATION:
Medium-Heavy Industrial Equipment

Optical Equipment
Laboratory Equipment
CHARACTERISTICS:
Lateral to vertical stiffness approximately 1:1.

Elastic Limit corresponds to a maximum load in
compression of .042 oz. (1.2 g) and radially
.007 oz. (0.2 g). Damping factor c/co .10 to .15.
4.17 (106)
3.46 (88)
MOUNTING:
Must be loaded vertically through its axis.
2 HOLES
.401 (10.2)
2.95
(75)
3/8-16 UNC-2B x 1/2 DEEP
2.52 (64)
9
H
10
11
INCH COMPONENT
Catalog Number
A10Z30-2273
A10Z30-2274
A10Z30-2275
Static Load Range

lbf
60 90
90 135
135 200
kgf
27 40
40 61
61 90
Hz
2 2-1/2
2 2-1/2
2 2-1/2
12
H - Height
Natural
Frequency
Free
in.
5.7
5.7
5.7
Max. Load
mm
145
145
145
in.
3
3
3
mm
76
76
76
13
14
15
8-67
16
I
R
T
1
2
3
4
5

Inch
MATERIAL:
Mounting Plates - Mild Steel, Painted

Springs - High-Tensile Steel, Phosphated, Dyed Black
Isolators - Knitted Stainless Steel Mesh
-94F to +347F (-70C to +175C)
APPLICATIONS:
Heavy Loads
Compressors
Pumps
Grain Vibrators
CHARACTERISTICS:

Elastic limit corresponds to a maximum load in
MOUNTING:

X
7
3-3/4 (95.3)
4-1/2 (114.3)
1/2-20 UNF
.563 (14.3)
10
H
11
.260 (6.6)
12
13
SECTION X-X
14
Catalog Number
15
A10Z31-2461
A10Z31-2462
A10Z31-2463
16
INCH COMPONENT
8-68
Static Load Range

lbf
150 260
250 450
440 750
kgf
68 118
113 205
200 340
H - Height
Natural
Frequency
Hz
4 4-1/2
4 4-1/2
4 4-1/2
Free
in.
3.0
3.0
3.0
Max. Load
mm
76.2
76.2
76.2
in.
2.378
2.378
2.378
mm
60.4
60.4
60.4
SELECTION CRITERIA A10Z32 MOUNTINGS

INDUSTRIAL AND MARINE APPLICATIONS:
The following table gives recommended isolation

efficiency in relation to site configuration and driving
motor power. If site configuration is not known, assume
for basement condition. Transfer the recommended
efficiency to the transmissibility curves on the graph.
R
Inch
EXAMPLE:
Project a line from the efficiency required on the righthand side to intersect the performance lines 1008, 1006
and 1004. Project those intersections down to obtain
the two dimensionless ratios (R) for the three
mountings. Divide the lowest running speed (Hz) of the
complete machine by R to give the natural frequency
f'n required. Compare f'n with the actual natural
frequency (fn) of the mounting concerned. If f'n fits
into the fn band of the mounting, select that mounting.
If two mountings meet the above conditions, select the
one with higher fn; it will be more stable.
A fan turning at 980 rpm (16.3 Hz) driven by a 7 kw
motor running at 1470 rpm, which is to be installed on
an upper floor of light construction:
Recommended efficiency = 93%
first projection gives R = 5.5 for 1008
Driving
Motor,
kW
16.3
f f =
= 2.96 Hz
and from fn = ,
n
R 5.5
discard 1008 as it has fn = 9 to 7 Hz
second projection gives R = 4 for 1006 & 1004
16.3
again fn = = 4.08 Hz
4
Up to 4
4 10
10 30
30 75
75 225
2
3
4
Recommended Isolation Efficiency:
Basement
or Ground
Floor
50%
80%
90%
95%
Upper Floor
Heavy
Construction
50%
75%
90%
95%
97%
Upper Floor
Light
Construction
90%
93%
95%
97.5%
98.5%
Now, all that remains is to place sufficient 1004

series mountings under the machine to support its
weight evenly.
10
20 %
40 %
70 %
80 %
90 %
93 %
.1
A10Z321008
97 %
98.5 %
99 %
A10Z321006 &
1004
.01
.001
.5
which fits 1004, fn = 5 to 3 Hz
TRANSMISSIBILITY (T)
5 6 7 8 910
99.5 %
20
99.9 %
30 40 50 607080 100
ROTATION SPEED OF MACHINERY (Hz)

(R) FREQUENCY RATIO = f =
fn
MOUNTING NATURAL FREQUENCY (Hz)
10
11
12
13
14
15
8-69
16
R
T

APPLICATIONS:
Heavy Loads
Compressors
Pumps
Grain Vibrators
CHARACTERISTICS:

Elastic Limit corresponds to a maximum load in
3.07 (78)
MOUNTING:

H
TYPICAL TRANSMISSIBILITY
PERFORMANCE CURVE
10
TRANSMISSIBILITY
20%
70%
.1
90%
1008
1004
.01
97%
10
2 HOLES
.433 (11)
3-15/16
(100)
M12
x 1.75
99.5%
99.9%
100
1006
20
4.33 (110)
5-33/64 (140)
FORCING FREQUENCY
NATURAL FREQUENCY
RATIO =
10
11
14
15
16
Catalog Number
(Less Suffix)
INCH COMPONENT
CATALOG NUMBER
A10Z321004
1006
1008
12
13
-94F to +347F (-70C to +175C)
6
7
Mounting Plate - Mild Steel, Painted

Spring - High-Tensile Steel, Phosphated, Dyed Black
Inch
MATERIAL:
ISOLATION
Load
Range
Suffix
11
12
13
14
15
16
8-70
A10Z32-1004..
Load
Range
Suffix
(see table)
A10Z32-1006..
A10Z32-1008..
H
Free
H
Loaded
5.67
(144)
3.70
(94)
3.70
(94)
4.88
(124)
3.46
(88)
3.46
(88)
Natural
Frequency
Hz
35
57
79
Equivalent
Static
Deflection
.394 1.181
(10 30)
.197 .394
(5 10)
.118 .197
(3 5)
Static Load Range

A10Z32-1004..
lbf
165 243
209 287
276 353
353 507
463 683
661 926
kgf
75 110
95 130
125 160
160 230
210 310
300 420
A10Z32-1006..
lbf
66 110
110 176
176 275
276 430
430 683
683 926
kgf
30 50
50 80
80 125
125 195
195 310
310 420
A10Z32-1008..
lbf
88 187
143 246
243 419
386 595
551 882
794 1235
kgf
40 85
65 125
110 190
175 270
250 400
360 560

R
Inch
MATERIAL:
Mounting Plate - Mild Steel, Painted

Springs - High-Tensile Steel, Phosphated, Dyed Black
APPLICATIONS:
-94F to +347F (-70C to +175C)

Heavy Loads
Compressors
Pumps
Grain Vibrators
CHARACTERISTICS:

Elastic limit corresponds to a maximum load in
MOUNTING:

H
TYPICAL TRANSMISSIBILITY
PERFORMANCE CURVE
6
M12 x 1.75
3-1/16
(78)
20%
70%
90%
.1
1008
1004
.01
97%
10 20
FORCING FREQUENCY
NATURAL FREQUENCY
1004
1006
1008
Load
Range
Suffix
25
26
A10Z32-1004..
Load
Range
Suffix
(see table)
A10Z32-1006..
A10Z32-1008..
H
Free
H
Loaded
5.82
(148)
3.94
(100)
3.94
(100)
5.04
(128)
3.54
(90)
3.54
(90)
Natural
Frequency
Hz
35
57
79
Equivalent
Static
Deflection
.394 1.181
(10 30)
.197 .394
(5 10)
.118 .197
(3 5)
lbf
860 1367
1323 1852
kgf
390 620
600 840
A10Z32-1006..
lbf
860 1367
1367 1852
kgf
390 620
620 840
9
10
11
12
13
Static Load Range

A10Z32-1004..
7
8
8.27 (210)
9-27/32 (250)
Catalog Number
(Less Suffix)
INCH COMPONENT
CATALOG NUMBER
A10Z32-
3-15/16
(100)
4
HOLES
.512
(13)
99.5%
99.9%
100
1006
RATIO =
ISOLATION
TRANSMISSIBILITY
10
A10Z32-1008..
lbf
1102 1764
1587 2469
kgf
500 800
720 1120
14
15
8-71
16
I
R
SAFETY CHANNEL MOUNTINGS TO 52 lbf / in.

FOR LOADS UP TO 52 lbf PER INCH OF LENGTH
SUPPLIED IN 30 INCH LENGTHS
Inch
MATERIAL:

Channels - Steel
1
2
3
4

81% vibration absorption (usually satisfactory)
will be obtained when the mounting indicated is
operating at the minimum load shown for each
forced frequency. Better than 81% absorption will
be obtained either with a greater load (within
the limits shown) for a given forced frequency,
or with a higher forced frequency for a given load.
2-3/32
3/8
1-39/64
7/64
3/4
1-3/16
1-7/8
4-1/4
INSTALLATION INFORMATION
MFG. HOLE
HOLES DRILLED AT ASSEMBLY

BY CUSTOMER, AS REQUIRED
70
LOAD
60
SUPPORT
10
11
12
13
14
15
16
LOAD (lbf)
50
x
x
110C
(PER INCH
LENGTH)
40
30
30
STYLE 110 FOR SUSPENDED LOADS
20
10
0
.05
.10
.15
.20
.25
DEFLECTION (in.)
SPACERS AND MOUNTING HARDWARE NOT PROVIDED
INCH COMPONENT
Catalog Number
Load
Limit
1200
A10Z 5-110C
52
52
8-72
lbf

1500
1800
2100
Min. Load for 81% Isolation (lbf)
35
26.5
20
2400
16
SAFETY CHANNEL MOUNTINGS TO 90 lbf

MATERIAL:
Isolator - Rubber
Housing - Steel
Inch

T
1
81% vibration absorption (usually satisfactory)

will be obtained when the mounting indicated is
operating at the minimum load shown for each
forced frequency. Better than 81% absorption will
be obtained either with a greater load (within the
limits shown) for a given forced frequency, or with
a higher forced frequency for a given load.
2
2-3/32
17/32
3/16
#12 (.1046)
GAUGE
3/4
1/8
1-1/4
1-39/64
13/32
9/16
3/4
3-1/4
2-1/8
1/2
4-1/4
1-1/2
SPACER NOT FURNISHED

WITH MOUNTING
3/4
1-1/4
3/4
#11 (.1196) GAUGE
15/16
3/16R
160
120
100
LOAD (lbf)
x
I
I
I
I
I
I
I
I
x
140
80
60
40
10
11
12
20
0
.1
.2
.4
.3
.5
DEFLECTION (in.)
13
INCH COMPONENT
Catalog Number *
A10Z 5-101C1
Load
Limit
1000
Min.
Max.
80
90
lbf

1250
1500
1750
Min. Load for 81% Isolation (lbf)
55
90
40
90
2000
28
90
24
90
14
15
8-73
16
SAFETY CHANNEL MOUNTINGS TO 95 lbf

FOR LOADS UP TO 95 lbf
R
T
1
2
MATERIAL:
Inch
Housing - Steel
Isolator - Rubber
81% vibration absorption (usually satisfactory) will be

obtained when the mounting indicated is operating at
the minimum load shown for each forced frequency.
Better than 81% absorption will be obtained either with a
greater load (within the limits shown) for a given forced
frequency, or with a higher forced frequency for a given
load.
5/8
13/64
3
3/4
1/16
13/64
(TYP)
3/8
7/16
1-9/16
2
7/32
200
LOAD DEFLECTION GRAPH

Deflections below the line x-x are
considered safe practice for static
loads; data above that line are
useful for calculating deflections
150
5/8 (TYP)
13/64 (TYP)
120A1
1/4 R
(TYP)
13/64 (TYP)
15
16
.05
.10
.15
.20
.25
DEFLECTION (in.)
Three Hole
Fig. 2
11
14
100
50
13
LOAD (lbf)
1
One Hole
Fig. 1
12
SUPPORT
1/2
10
120A6
LOAD
1 (TYP)
SPACER NOT
FURNISHED WITH
MOUNTING
#14 (.083)
B.W.G.A.
3/8
1/2
INCH COMPONENT
Catalog Number *
Fig.
No.
Load
Limit
A10Z 5-120A1
A10Z 5-120A6
1
2
16.5
95
lbf
8-74

1500
1750
2000
2500
3000
Min. Load for 81% Isolation (lbf / in.)
16.5
95
13.5
70
10
55
6
35
4
25
RECTANGULAR MOUNTINGS TO 1475 lbf

FOR COMPRESSION LOADS OF 1475 lbf
SHEAR LOADS OF 440 lbf
R
Inch
MATERIAL:

Base - Steel

1
1-1/8
1-1/2
3/16
1-1/4
SECTION X-X
4-3/4
COMPRESSION
3/4
2-1/2
3-13/16
2800
2600
2400
2200
3/8-24 UNF (TYP)
COMPRESSION
COMPRESSION
2000
COMPRESSION
LOAD (lbf)
1800
7/16
1600
1400
1200
5-7/8
6-3/4
SHEAR
SECTION Y-Y
1000
SHEAR
800
600
SHEAR
400
200
0
.1 .2 .3 .4 .5 .6 .7 .8
DEFLECTION (in.)
81% vibration absorption (usually satisfactory) will be obtained when the

mounting indicated is operating at the minimum load shown for each forced
frequency. Better than 81% absorption will be obtained either with a greater
load (within the limits shown) for a given forced frequency, or with a higher
forced frequency for a given load.
INCH COMPONENT
CATALOG NUMBER
A10Z 6-520B
Compression
Maximum
Load

675
850
950
Shear
Maximum
Load
675
850
950
1250
1500
1750
2000
2500
1200
1040
650
470
320
170
2000
2500
50

1100
1250
1500
1750
11
12
13
14
lbf
440
1100
lbf
1475
10
.9
440
250
190
135
110
70
60
8-75
15
16
HEAVY-DUTY RUBBER COMPRESSION SPRINGS

R
T
MATERIAL:
Inch

Base - Steel
X
0
A
2
2
Y
4
11/16
X
3
4
5
13
3/8
SECTION Y-Y
1/4
SECTION X-X
Recommended Maximum Loads
A10Z
A10Z
A10Z
A10Z
7-901
7-902
7-903
7-904
Static
lbf
Occasional Dynamic
lbf
3800
6000
7000
4400
8000
13600
15000
10000
2-1/8
1-3/4
1-1/2
2
8
9
10
11
12
13
14
15
16
1-3/4
INCH COMPONENT
Catalog Number *
8-76
RECTANGULAR RUBBER BUMPERS

FOR LOADS OF 4700 lbf
MATERIAL:
Inch

Base - Steel
0
X
1
1-1/2
T
1
2
Y
1-3/4
X
11/16
SECTION X-X
13
1/4
SECTION Y-Y
INCH COMPONENT

Catalog Number *
Static
Occasional Dynamic
4700
11000
lbf
A10Z 7-1001
lbf
7
FOR LOADS OF 1200 lbf
MATERIAL:
Base - Steel
1-1/4
9
X
2-1/2
6-3/4
4-3/4
11
1-1/16
3/16 1-1/4
7/16
5-7/8
10
7/16
SECTION X-X
12
13
INCH COMPONENT
Catalog Number *
Static
Occasional Dynamic
1200
2150
lbf
A10Z 7-1011
14
lbf
15
8-77
16
I
R
T
1
2
3
4
5
RECTANGULAR BASE MOUNTS

NEOPRENE
DURULENETM
Inch
MATERIAL:
Plates - Steel
Isolator - Oil-Resistant Neoprene or DuruleneTM
Neoprene: -40F to +180F
DuruleneTM: -65F to +250F
FEATURES:
Threaded plate molded into mounting.

Nonskid base and top surface.
A
E
APPLICATIONS:
Industrial
Air Conditioning
Business Machines
CHOOSE DURULENETM FOR THE FOLLOWING:
Rooftop - Extreme heat or cold, direct sunlight
Indoor/Outdoor - Severe weather
Ozone - Emitting electrical equipment
Additional load ratings available on special order.
TOP INSERT PLATE

G
6
CD
7
8
9
10
11
13
14
Catalog Number *
Neoprene
**A10Z53-FB0470
**A10Z53-FC1120
A10Z53-FD1500
A10Z53-FD2250
A10Z53-FD3000
A10Z53-FD4000
Graph
Ref.
DuruleneTM
A10Z53-FD1500
A10Z53-FD2250
A10Z53-FD3000
A10Z53-FD4000
D
D
D
D
Catalog Number *
(Ref.)
**A10Z53-FB0470
**A10Z53-FC1120
A10Z53-FD1500
A10Z53-FD2250
A10Z53-FD3000
A10Z53-FD4000
DuruleneTM
A10Z53-FD1500
A10Z53-FD2250
A10Z53-FD3000
A10Z53-FD4000
D
D
D
D

S for Standard Deflection
or D for Double Deflection
15
16
BOTTOM INSERT
STEEL PLATE
INCH COMPONENT
Neoprene
12
CS
8-78
DS,DD
HS, HD
IS, ID
JS, JD
KS, KD
LS, LD
Rated
Load
470
1120
1500
2250
3000
4000
3-3/4
5
6-1/4
6-1/4
6-1/4
6-1/4
2-1/8
3-1/16
4-5/8
4-5/8
4-5/8
4-5/8
lbf
Height
Standard
CS
1-1/8
1-5/8
1-5/8
1-5/8
1-5/8
1-5/8
D
Dia.
3/8-16
1/2-13
1/2-13
1/2-13
1/2-13
1/2-13
3
4
5
5
5
5
3/8
9/16
9/16
9/16
9/16
9/16
1-9/16
2-5/16
3
3
3
3
1/4
3/8
3/8
3/8
3/8
3/8
Double
CD
1-7/8
2-3/4
2-3/4
2-3/4
2-3/4
2-3/4
Max. Static
Deflection
Standard
Double
.20
.25
.25
.25
.25
.25
.40
.50
.50
.50
.50
.50
For Load Deflection Graphs see page following page.

LOAD DEFLECTION FOR BASE MOUNTS

NEOPRENE
DURULENETM
For Rectangular Base Mounts A10Z53-... See previous page
Inch
For Diamond Base Mounts A10Z52-... See following pages
LOAD vs. DEFLECTION

400
9S
9D
7S
7D
350
LOAD (lbf)
300
250
200
150
5S
100
.1
3D
1D
1S
0
6D
5D
3S
50
0
6S
.2
.3
.4
.6
.5
DEFLECTION (in.)
LOAD vs. DEFLECTION

LS
4000
LD
3500
3000
LOAD (lbf)
2500
KS
KD
JS
JD
9
10
2000
IS
1500
1500
1000
0
ID
HD
14D
13D
HS
14S
13S
GS
DS
11S
10S
0
.1
.2
10D
11D
DD
.3
.4
11
12
.6
.5
DEFLECTION (in.)
13
14
15
8-79
16
I
R
T
1
2
3
4
5
DIAMOND BASE MOUNTS

NEOPRENE
DURULENE
Inch
MATERIAL:
Plates - Steel
Isolator - Oil-Resistant Neoprene or Durulene
DuruleneTM: -65F to +250F
FEATURES:

F
2 HOLES
APPLICATIONS:
Industrial
Air Conditioning
Business Machines
E
A

TOP INSERT PLATE
G
6
7
CD
CS
BOTTOM INSERT
STEEL PLATE
8
INCH COMPONENT
Catalog Number *
Neoprene
10
11
A10Z52-FA0045
A10Z52-FA0070
A10Z52-FA0120
13
A10Z52-FA0045
A10Z52-FA0070
A10Z52-FA0120
A10Z52-FA0045
A10Z52-FA0070
A10Z52-FA0120
D
D
D
DuruleneTM
A10Z52-FA0045
A10Z52-FA0070
A10Z52-FA0120
D
D
D

14
15
16
DuruleneTM
Catalog Number (Ref.) *

Neoprene
12
Graph
Ref.
8-80
Rated
Load
B
Dia.
45
70
120
3-1/8
3-1/8
3-1/8
1-3/4
1-3/4
1-3/4
lbf
1S, 1D
3S, 3D
5S, 5D
Height
Standard
CS
1
1
1
D
Dia.
F
Dia.
5/16-18
5/16-18
5/16-18
2-3/8
2-3/8
2-3/8
11/32
11/32
11/32
1-1/4
1-1/4
1-1/4
3/16
3/16
3/16
Double
CD
1-1/4
1-1/4
1-1/4
Max. Static
Deflection
Standard
Double
.20
.20
.20
.40
.40
.40

For Load Deflection Graphs see previous page.
DIAMOND BASE MOUNTS

NEOPRENE
DURULENE
R
Inch
MATERIAL:
Plates - Steel
Isolator - Oil-Resistant Neoprene or Durulene
T
1

Durulene: -65F to +250F
FEATURES:

APPLICATIONS:
Industrial
Air Conditioning
Business Machines
F
2 HOLES
4
E
A
TOP INSERT PLATE

G
CD
CS
BOTTOM INSERT
STEEL PLATE
8
INCH COMPONENT
Catalog Number *
Neoprene
A10Z52-FB0135
A10Z52-FB0240
A10Z52-FB0380
A10Z52-FB0550
A10Z52-FC0525
A10Z52-FC0750
A10Z52-FC1100
Graph
Ref.
DuruleneTM
A10Z52-FB0135
A10Z52-FB0240
A10Z52-FB0380
A10Z52-FB0550
A10Z52-FC0525
A10Z52-FC0750
A10Z52-FC1100
D
D
D
D
D
D
D
Catalog Number (Ref.) *

Neoprene
A10Z52-FB0135
A10Z52-FB0240
A10Z52-FB0380
A10Z52-FB0550
A10Z52-FC0525
A10Z52-FC0750
A10Z52-FC1100
DuruleneTM
A10Z52-FB0135
A10Z52-FB0240
A10Z52-FB0380
A10Z52-FB0550
A10Z52-FC0525
A10Z52-FC0750
A10Z52-FC1100
D
D
D
D
D
D
D

6S, 6D
7S, 7D
9S, 9D
10S, 10D
11S, 11D
13S, 13D
14S, 14D
Rated
Load
B
Dia.
135
240
380
550
525
750
1100
3-7/8
3-7/8
3-7/8
3-7/8
5-1/2
5-1/2
5-1/2
2-3/8
2-3/8
2-3/8
2-3/8
3-3/8
3-3/8
3-3/8
lbf
Height
Standard
CS
1-1/4
1-1/4
1-1/4
1-1/4
1-3/4
1-3/4
1-3/4
D
Dia.
F
Dia.
3/8-16
3/8-16
3/8-16
3/8-16
1/2-13
1/2-13
1/2-13
3
3
3
3
4-1/8
4-1/8
4-1/8
11/32
11/32
11/32
11/32
9/16
9/16
9/16
1-3/4
1-3/4
1-3/4
1-3/4
2-1/2
2-1/2
2-1/2
7/32
7/32
7/32
7/32
1/4
1/4
1/4
Double
CD
1-3/4
1-3/4
1-3/4
1-3/4
2-7/8
2-7/8
2-7/8
Max. Static
Deflection
Standard
Double
.25
.25
.25
.25
.25
.25
.25
.50
.50
.50
.50
.50
.50
.50

For Load Deflection Graphs see previous page.
8-81
10
11
12
13
14
15
16
VIBRATION TRANSMISSIBILITY CHARTS

Figure 1:
Schematic of simple mounting system
Inch
T
Mass (M)
1
K
c/cc
K = Stiffness of spring (mount)

c/cc = Critical damping ratio
c = System damping coefficient
cc = Critical damping coefficient
fd = Disturbing frequency
fn = Natural frequency
3
4
100
% TRANSMISSIBILITY = T =
fn
Figure 2: Transmissibility vs. Frequency Ratio and c/cc
100
80
60
c/cc = .01
40
30
20
10
8
13
c/cc = .05
6
c/cc = .10
4
3
c/cc = .20
c/cc = .50
1.0
.8
20%
Attenuation
.6
.10
.4
.3
.1
.1
.2
15
16
70%
.20
.50
.01
.05
.2
14
40%
.3 .4
RATIO=
8-82
.6
.8 1
FORCING FREQUENCY
NATURAL FREQUENCY
8 10
90%
PERCENT ISOLATION
12
TRANSMISSIBILITY T
Amplification
11
2
1
TO DETERMINE THE EFFICIENCY OF ISOLATION,

SUBTRACT THE % TRANSMISSIBILITY FROM 100%
10
( )
fd

R
Inch
10
0%
Figure 3: Vibration Transmissibility Chart for C/Cc = 0
NC
3
5% 10% 20% 0%
.01
NA
RE
SO
2% 3%
s
ion
ns
ns
tio
tio
ca
ca
pli
pli
Ap
Ap
al
al
itic
itic
Cr
3
4
5
6
ly
me
2000
800
1000
10.0
500
600
Ex
tre
6.0
Cr
3.0
4.0
TRANSMISSIBLITY
at
lic
pp
lA
ica
rit
nc
2.0
1%
eA
vo
ide
d
To
B
ion
at
fic
1.0
400
100
90
80
70
60
.6
300
150
.3
.4
No
200
.2
pli
250
.1
Am
400
350
300
.06
200
500
.03
.04
100
1000
900
800
700
600
STATIC DEFLECTION IN INCHES
NATURAL FREQUENCY (fn) CYCLES PER MINUTE
.02
3000
2000
DISTURBING FREQUENCY (fd) CYCLES PER MINUTE
9
10
11
12
13
14
15
8-83
16
I
R
T
1
2
LEVELING BASE MOUNTINGS TO 10000 lbf

FOR COMPRESSION LOADS ONLY
FOR LOADS OF 100 TO 10000 lbf (45 to 4536 kgf)
Inch
INSTALLATION:
Raise the machine with conventional lifting devices;

place the mountings beneath the machine feet and
attach the leveling screws to the mounting. Lower the
machine and ensure that the total weight is carried by
all of the mountings. Level to a desired height by
gradual and sequential adjustment of the leveling
screws. Tighten the locknut.
CHARACTERISTICS:
3
4
The mountings consist of two rugged meehanite

castings, a resilient pad of knitted stainless steel mesh
and pressed steel baseplate. The leveling screw seats
into the bottom casting thus providing a built-in
leveling device. The excellent damping characteristics
of this mounting are unaffected by contaminants such
as oil, grease or caustics.
5
6
1/2 (12.7)
C
D
7
8
BEFORE LEVELING
AFTER LEVELING
9
10
11
12
13
14
INCH COMPONENT
A10Z25-0139-1
A10Z25-0139-2
A10Z25-0139-3
A10Z25-0139-4
A10Z25-0139-5
* A10Z25-0339
A10Z25-0339-1
A10Z25-0339-3
A10Z25-0339-5
kgf
lbf

100 250
250 500
500 1000
1000 2000
2000 4000
1000 10000
1000 4000
4000 7000
7000 10000
45 113
113 227
227 454
454 907
907 1814
454 4536
454 1814
1814 3175
3175 4536

15
16
Load Rating
Catalog Number
8-84
B
Dia.
D
UNC
2 (50.8)
2 (50.8)
2 (50.8)
2 (50.8)
2 (50.8)
2-1/8 (54)
2-1/8 (54)
2-1/8 (54)
2-1/8 (54)
4-1/4 (108)
4-1/4 (108)
4-1/4 (108)
4-1/4 (108)
4-1/4 (108)
7-45/64 (196)
7-45/64 (196)
7-45/64 (196)
7-45/64 (196)
3-1/2 (89)
3-1/2 (89)
3-1/2 (89)
3-1/2 (89)
3-1/2 (89)
4-9/32 (109)
4-9/32 (109)
4-9/32 (109)
4-9/32 (109)
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
1-8
1-8
1-8
1-8
SELECTION PROCEDURE FOR RUBBER MOUNTINGS

R
Inch
1. Determine the load that each mounting will bear when supporting the equipment weight. Total
weight divided by the number of mounting positions is the load for each mounting. This is only
true when having even weight distribution. Otherwise, distribute weight accordingly.
2. Determine the lowest forcing frequency of the vibration source to be supported by the mountings.
This is usually equal to the operating speed in revolutions per minute.
3. Choose the percent isolation that will be satisfactory for the purpose. Except for special cases,
81% isolation is generally considered satisfactory.
4. Referring to the Basic Vibration Chart on the previous page, find the static deflection for the forcing
frequency (Step 2, above) at the chosen percent isolation (Step 3). Note that a mounting must
give at least this minimum static deflection, with the specific load applied, to provide the desired
isolation.
5. Select the mounting series with the physical features (shape, attachment facilities, fail-safe
safety feature, load range, etc.) required by the application.
T
1
2
3
4
6. a) Having selected the mounting series, refer to the individual styles and note the styles whose
maximum loads are greater than the load each mounting is to carry.
b) Referring to the load deflection graphs of the styles likely to be chosen, locate the applied load
value (Step 1, above) on the appropriate graph; i.e., compression and/or shear.
c) Moving horizontally to the right on the graph, locate the point of intersection with the minimum
static deflection found in (Step 4).
d) Mountings with curves above this point of intersection cannot be used, as the load (Step 1) is
not sufficient to produce the required minimum deflection (Step 4).
e) Mountings with curves below the point of intersection can be used as, at the given load, the
deflection will be greater than the minimum required. Note, however, that if the applied load
is above the line x--x on a curve, the mounting is not recommended for this static load.
f)

More than one style may have load-deflection curves that are suitable. The final selection can
depend on other requirements such as the cost of the mountings, possible increased load
requirements in the future, relative advantage of additional isolation, space available for the
mountings, constraints on allowable deflection, attachment requirements, etc. However, in
the absence of any overriding consideration, usually the mounting that is selected has its curve
closest to the point of intersection (Step 6c); i.e., the mounting with the minimum deflection
at the applied load.
7. Select the mounting that is designed to operate in your temperature range and environment.
10
11
12
13
14
15
8-85
16
LEVELING BASE MOUNTINGS TO 12000 lbf

R
T
1
INSTALLATION:
Raise the machine with conventional lifting devices;

place the mountings beneath the machine feet and
attach the leveling bolts to the mounting. Lower the
machine and ensure that the total weight is carried by
all of the mountings. Level to a desired height by
gradual and sequential adjustment of the leveling
bolts. Tighten the locknut.
Locknut is tightened down

onto machine foot after it
has been leveled for
permanent positioning.
High-strength steel housing carries

load and rides on Neoprene base
without any appreciable mechanical
wear or fatigue.
4
5
Turning leveling bolt raises

height of metal housing and
foot of machine as much as
1/2 inch.
2
3
Inch
Neoprene elastomer
mounting base controls
deflections under
vibration and shock
loads with high isolation
efficiency.
STATIC
H
O.D.
Base of mount rests

squarely against floor
surface with no creeping
or walking. Machine
remains readily portable
with no damage to floor.
7
8
9
10
BEFORE LEVELING
11
INCH COMPONENT
12
Catalog Number
13
A10Z25-LM3
A10Z25-LM5
A10Z25-LM6
A10Z25-LM8
14
Load lbf
Min.
Max.
100
500
1000
4000
500
1000
4000
12000
Natural Frequency is approximately 8 12 Hz at Max. Load.
15
16
AFTER LEVELING
8-86
O.D.
H
Static
Height
Bolt Size
&
Length
3-1/2
5
6-1/4
8
1-1/8
1-3/4
1-3/4
2
1/2-13 x 3-1/2
1/2-13 x 5
3/4-10 x 5
1-14 x 8
ISO-PADS MOUNTS TO 4000 lbf

MATERIAL:
Isolator - Iso-Pad (Standard Load).

Refer to characteristics shown on following page.
Base - Casting 30000 psi Tensile Strength
Bolt - SAE Grade No. 5 Heat-Treated
Inch
Additional bolt and mount sizes available on request.
T
1
2
3
Fig. 1 Regular Mount
7
8
B
C
9
A
10
* Fig. 2 Fixed Mount
11
INCH COMPONENT
Pad
Dimensions
Pad
Area
sq. in.
Load per
Mount
lbf
Bolt
Dim.
A
Min.
Height
B
Max.
Adj.
C
Overall
Height
A10R12-R22
A10R12-R33
A10R12-R44
A10R12-R66
2 x 2 x 5/8
3 x 3 x 5/8
4 x 4 x 5/8
5-1/2 x 5-1/2 x 5/8
4
9
16
30
200 500
500 1200
1200 2400
2400 4000
1/2-20 x 4
1/2-20 x 4
3/4-16 x 6
3/4-16 x 6
1-1/2
1-1/2
1-3/4
1-7/8
2-3/4
2-3/4
4-3/4
4-3/4
5-1/4
5-1/4
7-1/2
7-1/2
A10R12-F22
A10R12-F33
A10R12-F44
A10R12-F66
2 x 2 x 5/8
3 x 3 x 5/8
4 x 4 x 5/8
5-1/2 x 5-1/2 x 5/8
4
9
16
30
200 500
500 1200
1200 2400
2400 4000
1/2-20 x 4
1/2-20 x 4
3/4-16 x 6
3/4-16 x 6
1-7/8
1-7/8
2-7/16
2-5/8
2-9/16
2-9/16
3-13/16
3-11/16
4-3/4
4-3/4
6-9/16
6-3/4
Catalog Number
12
Fig. 1
Fig. 2
* Recommended for use under impact machinery.
8-87
13
14
15
16
ISO-PADS
FOR STANDARD LOADS OF 50 TO 100 psi
MATERIAL:
Inch
A compound of two layers of tough vinyl chloride

elastomeric resin bonded to both sides of a strong
reinforcing core of monofilament fiberglass and
fused in a special process.
T
1
COLOR:
Orange
-50F to +230F
COEFFICIENT OF FRICTION:
.8
NATURAL FREQUENCY vs. TEMPERATURE AT 100 psi:

-50 F
Room Temperature
+230 F
fn = 24 Hz
fn = 27 Hz
fn = 19 Hz
W
T
PATTERNED
LOAD DEFLECTION vs. RECOVERY
NATURAL FREQUENCY vs. LOAD (psi)

APPLIED LOAD (psi)
50
40
30
20
10
15
30
45
60
75
12
13
14
15
ING
AD
LO
30
IN
AD
O
NL
1.6 3.2 4.8 6.4 8.0
9.6 11.2 12.8
DEFLECTION IN PERCENT OF ORIGINAL THICKNESS

TRANSMISSIBILITY
TRANSMISSIBILITY
STATIC LOAD (psi)
2400
2000
1600
1200
800
400
0 .020 .040 .060 .080 .100 .120 .140 .160 .180
8.000
4.000
2.000
1.000
.500
.250
.125
.062
.031
.10
1.0
10
20
15 GAIN
10
5
0
5
10 LOSS
15
20
25
30
FORCING FREQUENCY
f
RATIO = o =
fn NATURAL FREQUENCY
DEFLECTION (in.)
INCH COMPONENT
Catalog Number
A10R10-00
A10R10-33
A10R10-36
A10R10-44
A10R10-48
22
3
3
4
4
23
3
6
4
8
5/8
5/8
5/8
5/8
5/8
* Priced per box of 12 pieces.
16
90
60
LOAD vs. DEFLECTION
11
120
90 105 120
STATIC LOAD (psi)
10
150
8-88
Pad
Area
sq. in.
506
*9
* 18
* 16
* 32
SCALE IN DB
180
60
FREQUENCY (Hz)
ISO-PAD SHEETS
UNPATTERNED
PATTERNED
R
Inch
COLOR:
Orange
.8
FOR BOLT ISOLATION:
Occasionally, machinery must be bolted down because of

unbalanced structure, upward pull, safety requirements or local
ordinances. Shimming instructions would apply for bolted
machinery. The bolt head should be isolated from the machine
base or feet by using a metal washer over a piece of ISO-PAD.
The body of the bolt must also be isolated. This can be achieved
with Bolt Insulator material cut to size, rolled into a cylinder, and
slipped over the bolt.
2
3
FOR MACHINE LEVELING:
SHIM increases ISO-PAD height in 3/32 increments. If metal shims

are required, use ISO-PAD SHIM to isolate them from the machine
base and eliminate metal-to-metal contact. It is especially useful
in assuring level machine installations on unlevel floors. ISO-PAD
SHIM has a composition similar to ISO-PAD Standard.
(See previous page for ISO-PAD Standard)
5
6
TYPICAL INSTALLATIONS:
ISO-PAD
SHIM
MACHINE
STANDARD
METAL SHIM STOCK
(.001 TO .062 AS REQUIRED)
ISO-PAD
MACHINE
ISO-PAD
METAL WASHER
(3/16 THICK)
ISO-PAD
ISO-PAD BOLT
INSULATOR
FLOOR
9
10
INCH COMPONENT
Catalog Number
Iso-Pad for Bolt Insulator (Unpatterned)

11
A10R11-B11
Iso-Pad for Shim (Patterned)
22
A10R11-A00
11
3/32
22
3/32
11
12
13
14
15
8-89
16
ISO-PADS
FOR LIGHT LOADS OF 20 TO 120 psi
MATERIAL:
Inch
Vinyl Chloride Elastomeric Resin
COLOR:
Orange
-50F to +230F
.8
NATURAL FREQUENCY vs. TEMPERATURE AT 80 psi:
-50 F
Room Temperature
+230 F
fn = 24 Hz
fn = 40 Hz
fn = 24 Hz
UNPATTERNED
LOAD DEFLECTION vs. RECOVERY
NATURAL FREQUENCY vs. LOAD (psi)

120
100
80
60
40
20
15
30
45
60
75
100
80
LO
AD
IN
G
UN
LO
AD
IN
G
APPLIED LOAD (psi)
120
FREQUENCY (Hz)
5
6
60
40
20
0 .4 .8
90 105 120
1.6 2.4 3.2 4.0 4.8 5.6 6.4 7.2
STATIC LOAD (psi)
DEFLECTION IN PERCENT OF ORIGINAL THICKNESS
LOAD vs. DEFLECTION
TRANSMISSIBILITY
12
1000
800
600
400
200
0
.025
.050
.075
.100
20
15 GAIN
10
5
0
5
10 LOSS
15
20
25
30
8.000
4.000
2.000
1.000
.500
.250
.125
.062
.031
.10
DEFLECTION (in.)
RATIO =
13
14
15
16
INCH COMPONENT
Catalog Number
A10R
A10R
A10R
A10R
A10R
8-90
9-00
9-11
9-22
9-33
9-44
1.0
10
fo FORCING FREQUENCY
=
fn NATURAL FREQUENCY
Pad
Area
+.062
-.000
sq. in.
22
1
2
3
4
23
1
2
3
4
.25
.25
.25
.25
.25
506
1
4
9
16
SCALE IN dB
TRANSMISSIBILITY
11
STATIC LOAD (psi)
1200
10
9 - LINEAR MOTION SYSTEMS

R
Inch
Double-Edged Size 0 Steel Tracks

pg. 9-5
Steel Tracks with Mounting Holes

pg. 9-6
Steel Tracks, Plain

pg. 9-7
T
1
2
3
Guide Wheels
pg. 9-8
Adapter Bushings
pg. 9-9
Studded Guide Wheels

pg. 9-10
4
5
Guide Wheel Journal Assemblies

pg. 9-11
Utilitrak Carriage Assemblies

Economy
pg. 9-12
Utilitrak Linear Guide Rails

Economy
pg. 9-13
6
7
8
Mini-Rail Linear Guides

pg. 9-14
Technical Data:
Industrial "V" Guide Systems - pg. 9-2
"V" Guide System Engineering Notes - pgs. 9-3 & 9-4
Mini-Rail Linear Guides Technical Information - pg. 9-15
10
11
12
13
14
15
9-1
16
INDUSTRIAL V GUIDE SYSTEMS

R
T
Linear motion devices find application in many designs related to machines in general and
mechanisms in particular. The simplest known sliding pair used consists of a bushing and
shaft. Due to friction and the resulting wear, loss of alignment will occur which will, in turn,
cause binding and chatter. Because of vertical loading, the lubricant will accumulate where
it is not needed and will not be available where it could do some good. The presence of
lubrication may also cause accumulation of dust and dirt and create gumming and grit.
The above disadvantages led to the development of Ball Bushings with recirculating balls.
These have the disadvantage that they are captive on the shafts or have complicated
mounting arrangements if they are of the open type.
2
(b)
The wheel and track components offered in this catalog have the following advantages:
a.
Easy mounting to machined surfaces which are in most cases part of the existing
structure.
b.
Self-cleaning feature due to the circumference being greater at the edge than it is on
the bottom of the V groove, and there is a constant wiping action present.
c.
Eccentric bushings provide means to take out slack and compensate for any
inaccuracy or accumulation of tolerances.
d.
Low cost in comparison with other alternatives, in particular, for low speeds and loads
where the economy series guide wheels can be used.
e.
Available Selection of different guide wheel and track sizes and materials enables
economical choice depending on loads and other requirements.
3
4
5
Inch
GENERAL INFORMATION
(a)
(c)
The accuracy of the system depends on the parallelism of the mounting surfaces; therefore,
it cannot be stressed too strongly that reasonable care should be taken when bolting track
to the mounting surfaces to assure proper alignment. And, as a matter of good engineering
practice, the wheels should be so spaced that leverage from overhanging loads does not
cause stresses exceeding the load capacity of the wheel.
For Mounting Instructions and Engineering Notes see the following pages:
(d)
Name of Product
9
10
11
(e)
(f)
12
13
14
15
16
Page No.
Double-Edged Steel Tracks (Size 0)

Steel Tracks with Mounting Holes
Steel Tracks, Plain
Guide Wheels (Precision & Economy Series)
Adapter Bushings (Adjustable & Stationary)
Studded Guide Wheels (Adjustable & Stationary)
Guide Wheel Journal Assemblies
Utilitrak Carriage Assemblies and Rails (Economy Series)
9-2
(g)
9-5
9-6
9-7
9-8
9-9
9-10
9-11
9-12, 9-13
V GUIDE SYSTEM ENGINEERING NOTES

R
Inch
Fig. 2
Rotating motion in0large plates can be1
accomplished as shown in Fig. 2. A
valuable feature of the guide system
is that excellent stability of the plate
with maximum available working area
unencumbered by shafts and spindle
bearings is possible.
Fig. 1
When necessary to carry outboard loads, use setup as shown or
similar. Keep ratio of X to D as low as possible.
R1
Approximation of Max. Load is given by the Formula:

D
R1 = F

X
D
R2 = - F
X
Where: R1 = Max. Axial Load per

Guide Wheel

D = Center Distance

X = Outboard Distance

F = Radial Load
T
1
2
NOTES: 1. Rigidity decreases as X

increases.
2. Max. Load not to exceed
Radial Load.
R2
4
5
Fig. 3
Shows use of Guide Wheels to guide strip stock into
punch press dies or roll forming machines. Use of all
adjustable mounting bushings gives axial as well as
longitudinal adjustment.
Fig. 4
STOCK
8
X2
Fig. 5
LOAD
Overhanging loads are mostly radial in nature. Use this

formula for approximate Max. Load.
LOAD
A
FIXED
PIVOT
LOAD
X1
A
FLOATING
PIVOT

X1
R =
F
X2 + X2
Where: R
X1
X2

F
=
=
=
=
9
10
Max. Axial Load per Guide Wheel

Center Distance
Outboard Distance
Radial Load
Max. Load not to exceed Radial Load.
11
12
13
W
SECTION A-A
14
In practical application, on long fabricated equipment, it

is difficult to hold track mounts to close tolerances. We
recommend use of more than two wheels to support a
heavy load, with construction approximately as shown in
Fig. 5. This system will compensate for small differences
in track alignment both height (H) and width (W).
15
9-3
16
V GUIDE SYSTEM ENGINEERING NOTES

R
T
1
2
3
4
5
6
Adjustment
Factor (AF)
1.0-0.7
0.7-0.4
LOAD FACTOR CALCULATION

Calculate the load factor for the most heavily loaded bearing
FA
FR
LF = +
FA(max)
FR(max)
Where: LF = Load Factor
FA = Resultant axial load on the guide wheel
FA(max) = The maximum axial working load capacity of

the guide wheel
FR = Resultant radial load on the guide wheel
FR(max) = The maximum radial working load capacity

of the guide wheel
0.4-0.1
Inch
Application
Conditions
0
1
Clean, low speed, low shock, low duty
Moderate contaminants, medium duty,
medium shock, low to medium vibration,
moderate speed
Heavy contamination, high acceleration, high speed, medium to high shock,
high vibration, high duty cycle
Life Constant Lc
DualVee Size
Inches of
Travel Life
1.65 x 106
2.19 x 106
3.47 x 106
5.19 x 106
6.84 x 106
8.58 x 106
0
1
2
3
4
4XL
Bearings should be sized such that LF 1

The most heavily loaded bearing will have the highest load
factor
LIFE CALCULATION
Calculate life by applying the load factor to the load/life
equation below:
Kilometers of
Travel Life
41
55
87
130
151
215
( )
LC
Life = AF
(LF)3
Due to varying application load and speed parameters and

environmental conditions, the appropriate adjustment factor
must be applied to the life equation.
Where: LF = Load Factor

LC = Life Constant
AF = Adjustment Factor
7
Calculate loads on each bearing. Given below are force equations for some common configurations.
FA = Axial Force, FR = Radial Force
Scenario 1
F(x-a)
FA1 =
x
Fa
FA2 =
x
10
11
12
Scenario 2
F(x+a)
FA1 =
x
-Fa
FA2 =
x
NOTE: Since carriages use 4 wheels,
2 wheels absorb the load at
both points 1 & 2, divide the
calculated load by 2 to obtain
the load on each wheel.
F
a
x
Scenario 1
13
1
14
Scenario 2
15
16
9-4
DOUBLE-EDGED SIZE 0 STEEL TRACKS

HARDENED
UNHARDENED
DRILLED
UNDRILLED
R
Inch
MATERIAL:
Fig. 1 Undrilled Steel - Hardened - AISI 1045 Carbon Steel (Rc 58 - 60),

Polished and Oiled

Unhardened - AISI 1045 Carbon Steel (Rc 22 - 25)

as Formed, Oiled
90
MATERIAL CODE:
VIRTUAL
APEX
MDT
90
VIRTUAL
APEX
MDT
Fig. 2 Drilled C AISI 1045 Carbon Steel, Unhardened (Rc 22 - 25)

Q AISI 1045 Carbon Steel, Hardened (Rc 58 - 60)
H
* To complete the Catalog Number please specify

Material Code from above.
CL
Fig. 1
Undrilled
CL
1
2
3
H
J
Fig. 2
Drilled
4
5
L 1/16
Fig. 1
Undrilled
6
L
Fig. 2
Drilled
INCH COMPONENT
Catalog Number
Hardened
Unhardened
Fig. 1 Undrilled
A 7Q15-01
A 7Q15-02
A 7Q15-04
A 7Q15-06
A
A
A
A
7C15-01
7C15-02
7C15-04
7C15-06
MDT
L
Length
.516
.516
.516
.516
.153
.153
.153
.153
.06
.06
.06
.06
.158
.158
.158
.158
.033
.033
.033
.033
1
2
4
6
ft.
NOTES: 1. Except for length, dimensions are in inch.

2. Maximum length available: Hardened - 20 feet Unhardened - 22 feet
INCH COMPONENT
Catalog Number *
Fig. 2 Drilled
A 7 15-00650
A 7 15-01250
A 7 15-01850
A 7 15-02450
A 7 15-03050
A 7 15-03650
No.
D
B
E
L
C
of
Dia. .005
.005 .005
Holes .015
.005
4
7
10
13
16
19
6.500
12.500
18.500
24.500
30.500
36.500
.250
.250
.250
.250
.250
.250
2.000
2.000
2.000
2.000
2.000
2.000
.156
.156
.156
.156
.156
.156
.138
.138
.138
.138
.138
.138
8
9
10
11
12
MDT
13
.153
.153
.153
.153
.153
.153
.06
.06
.06
.06
.06
.06
.516
.516
.516
.516
.516
.516
.033
.033
.033
.033
.033
.033
NOTES: 1. Dimensions are in inch.

2. Other track sizes available on special order.
9-5
.158
.158
.158
.158
.158
.158
14
15
16
I
R
STEEL TRACKS WITH MOUNTING HOLES

HARDENED
UNHARDENED
MATERIAL CODE:
T
1
C
Q
Y
W
Inch
AISI 1045 Carbon Steel, Unhardened

AISI 1045 Carbon Steel, Hardened to Rc 58...60
AISI 420 Stainless Steel, Unhardened
AISI 420 Stainless Steel, Hardened to Rc 48...50
* To complete the Catalog Number please specify

Material Code from above.
2
3
MDT
STANDARD DRILLED TRACK HOLE SPACING AND SIZE

L (inches)
G
J
5
B
.010 R
6
7
INCH COMPONENT
Catalog Number *
8
9
10
11
12
13
14
A7
A7
A7
A7
A7
A7
A7
A7
A7
A7
A7
A7
A7
A7
A7
A7
A7
A7
A7
A7
A7
A7
A7
A7
15
16
9-6
15-11250
15-12450
15-13650
15-14850
15-16050
15-17250
15-21263
15-22463
15-23663
15-24863
15-26063
15-27263
15-31275
15-32475
15-33675
15-34875
15-36075
15-37275
15-41300
15-42500
15-43700
15-44900
15-46100
15-47300
No.
.015
of
in. Holes .005
12.50
24.50
36.50
48.50
60.50
72.50
12.63
24.63
36.63
48.63
60.63
72.63
12.75
24.75
36.75
48.75
60.75
72.75
13.00
25.00
37.00
49.00
61.00
73.00
7
13
19
25
31
37
5
9
13
17
21
25
5
9
13
17
21
25
4
7
10
13
16
19
.250
.250
.250
.250
.250
.250
.310
.310
.310
.310
.310
.310
.380
.380
.380
.380
.380
.380
.500
.500
.500
.500
.500
.500
.005
2.000
2.000
2.000
2.000
2.000
2.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
4.000
4.000
4.000
4.000
4.000
4.000
D
Dia.
.005
.156
.156
.156
.156
.156
.156
.203
.203
.203
.203
.203
.203
.281
.281
.281
.281
.281
.281
.344
.344
.344
.344
.344
.344
.005
.156
.156
.156
.156
.156
.156
.219
.219
.219
.219
.219
.219
.313
.313
.313
.313
.313
.313
.375
.375
.375
.375
.375
.375
MDT
.187
.187
.187
.187
.187
.187
.250
.250
.250
.250
.250
.250
.343
.343
.343
.343
.343
.343
.437
.437
.437
.437
.437
.437
.031
.031
.031
.031
.031
.031
.031
.031
.031
.031
.031
.031
.062
.062
.062
.062
.062
.062
.093
.093
.093
.093
.093
.093
.437
.437
.437
.437
.437
.437
.625
.625
.625
.625
.625
.625
.875
.875
.875
.875
.875
.875
1.062
1.062
1.062
1.062
1.062
1.062
.062
.062
.062
.062
.062
.062
.093
.093
.093
.093
.093
.093
.109
.109
.109
.109
.109
.109
.125
.125
.125
.125
.125
.125
.125
.125
.125
.125
.125
.125
.187
.187
.187
.187
.187
.187
.250
.250
.250
.250
.250
.250
.312
.312
.312
.312
.312
.312
STEEL TRACKS PLAIN

HARDENED
UNHARDENED
MATERIAL:
Inch
Hardened - Steel - AISI 1045 Cold Formed,

Induction-Hardened to Rc 58...60 Polished and Oiled

Stainless Steel - 420 Cold Formed,

Hardened to Rc 48...50, Polished and Oiled
Unhardened - Steel - AISI 1045 Unhardened, Rc 22...25
(as formed), Oiled

Stainless Steel - 420 Series Unhardened, Rc 20...22
(as formed), Oiled
T
1
2
3
4
5
MDT
6
E
.010 R.
G
J
9
INCH COMPONENT
Catalog Number
Stainless Steel
Steel
Hardened - Maximum length: 20 feet (on special order)
A 7Q15-1065
A 7W15-1065
7/16
A 7Q15-2012
5/8
A 7Q15-2020
5/8
A 7Q15-2065
A 7W15-2065
5/8
A 7Q15-3065
A 7W15-3065
7/8
A 7Q15-4065
A 7W15-4065
1-1/16
Unhardened - Maximum length: 22 feet (on special order)
A 7C15-1065
A 7Y15-1065
7/16
A 7C15-2065
A 7Y15-2065
5/8
A 7C15-3065
A 7Y15-3065
7/8
A 7C15-4065
A 7Y15-4065
1-1/16
MDT
3/16
1/4
1/4
1/4
11/32
7/16
1/32
1/32
1/32
1/32
1/16
3/32
1/8
3/16
3/16
3/16
1/4
5/16
1/16
3/32
3/32
3/32
7/64
1/8
78
15
24
78
78
78
3/16
1/4
11/32
7/16
1/32
1/32
1/16
3/32
1/8
3/16
1/4
5/16
1/16
3/32
7/64
1/8
78
78
78
78
10
1/16
11
12
13
14
15
9-7
16
I
R
GUIDE WHEELS
PRECISION SERIES
ABEC 5 BEARINGS
Inch
MATERIAL:
T
1
2
Wheels - Steel SAE 52100 or 440C Stainless Steel; Both

hardened to Rc 60-62 with ground contact edges
Bearings - Prelubricated;
Steel - Shielded, Stainless - Sealed
Low and high temperature wheels

90

call our application engineering department.
B
MDW
O.D.
3
4
INCH COMPONENT
Catalog Number
Stainless Steel
Steel
6
7
8
A
A
A
*A
A
A
A 7Y16-1
A 7Y16-2
A 7Y16-3
A 7Y16-4
7Q16-0
7Q16-1
7Q16-2
7Q16-2S
7Q16-3
7Q16-4
W
O.D. O.D.
Clear. (Ref.) +.0000
-.0047
.584
25/32
1-1/4
1-1/4
1-25/32
2-3/8
.584
.771
1.210
1.210
1.803
2.360
.250
.310
.438
.438
.625
.750
B
Bore
MDW
.1575
.1875
.3750
.3750
.4724
.5906
15/64
5/16
1/2
1/2
3/4
1
+.0000
-.0003
Radial
Axial
Working Load Working Load
Capacity
Capacity
lbf
lbf
146
274
596
596
1326
2181
28
57
141
141
382
900
* This item has sealed bearings.

Bores conform to metric sizes.
ECONOMY SERIES
3/8
10
11
10
90
14.3
9/16
1.31
O.D. .44
33.3
O.D. 14
.251
BORE
12
6
BORE
.23
.06 (TYP)
Fig. 1 (Inch)
13
14
15
16
90
2 (TYP)
Fig. 2 (Metric)
INCH COMPONENT
Catalog Number
Fig.
No.
Bore
Wheel
Material
Bearing
Type
A 7Z16-2
A 7Z16M3
1
2
.251
6mm
Acetal
Acetal
Sintered Bronze
Sintered Bronze
9-8
ADAPTER BUSHINGS
ADJUSTABLE OR STATIONARY
FOR USE WITH STEEL GUIDE WHEELS
MATERIAL:
Inch
Steel, Nickel Plated

T
1
2
3
P
K
N
S
ADJUSTABLE
H
Fig. 1
8
N
STATIONARY
H
Fig. 2
10
11
INCH COMPONENT
Catalog Number
Steel *
Stainless Steel
Fig. 1 Adjustable Bushings

A 7C16-1A
A 7C16-2A
A 7C16-3A
A 7C16-4A
Fig. 2 Stationary Bushings
A 7C16-2F
A 7C16-3F
A 7C16-4F
.001
+ .000
- .001
N
Dia.
+ .002
- .001
A
A
A
A
7X16-1A
7X16-2A
7X16-3A
7X16-4A
.550
.706
.990
1.177
.250
.281
.375
.437
.1873
.3748
.4722
.5904
7/16
9/16
3/4
7/8
.138
.250
.312
.375
.012
.024
.042
.060
A
A
A
A
7X16-1F
7X16-2F
7X16-3F
7X16-4F
.550
.706
.990
1.177
.250
.281
.375
.437
.1873
.3748
.4722
.5904
7/16
9/16
3/4
7/8
.138
.250
.312
.375

NOTE: -1A and -1F bushings have a small shoulder to support the inner race of the guide wheel's bearing.
9-9
12
13
14
15
16
I
R
T
STUDDED GUIDE WHEELS

SIZES 0, 1, 2
EASY INSTALLATION
ADJUSTABLE OR STATIONARY
Inch
MATERIAL:
Wheels - Steel SAE 52100

Bearing - Prelubricated - Sealed (Size 0)

Shielded (Size 1 & 2)
1
HEX
THREAD
WASHER
NUT
2
3
F
B
L
W
90
Stationary Stud
MDw
F
B
O.D.
60
8
EC
Adjustable Stud
90
9
INCH COMPONENT
10
11
12
13
14
15
16
Catalog Number
A
A
A
A
A
A
7Q17-0STA
7Q17-0ADJ
7Q17-1STA
7Q17-1ADJ
7Q17-2STA
7Q17-2ADJ
Catalog Number
(Ref.)
A
A
A
A
A
A
7Q17-0STA
7Q17-0ADJ
7Q17-1STA
7Q17-1ADJ
7Q17-2STA
7Q17-2ADJ
Size
0
0
1
1
2
2
S
H
D
F
B
EC
L
Dia. Journal Thread Thread Shoulder Vee
Offset Overall Journal
Thick. Height
+.0000
Length Length
.005 Length
-.0007
.001
.002
.012
.015
.024
.74
.74
1.00
1.00
1.54
1.54
.1567
.1567
.2350
.2350
.3925
.3925
.24
.24
.35
.35
.59
.59
M4 x .7
M4 x .7
M6 x 1
M6 x 1
M10 x 1.5
M10 x 1.5
.080
.080
.083
.083
.104
.104
.205
.205
.238
.238
.323
.323
Hex Nut and O.D.

Size Washer
Static Dynamic Static Dynamic

Axial
Radial Radial
Axial
+.0000 MDw
Load
Load
Load
Load
-.0047
Rating lbf Rating lbf Rating lbf Rating lbf
.433
.433
.472
.472
.551
.551
.2500
.2500
.3100
.3100
.4375
.4375
M4
M4
M6
M6
M10
M10
.584
.584
.771
.771
1.210
1.210
NOTE: Load ratings are according to AFBMA STD9-1990.
9-10
.39
.39
.59
.59
.98
.98
.234
.234
.313
.313
.500
.500
112
112
250
250
625
625
236
236
490
490
1057
1057
106
106
234
234
591
591
119
119
245
245
535
535
GUIDE WHEEL JOURNAL ASSEMBLIES

MATERIAL:

Journal - Stainless Steel
Washers - Stainless Steel
Wheel Locknut - Steel, Zinc Plated, Nylon Insert, Grade 2
Inch
Mounting Plate Locknut - Steel, Zinc Plated, Nylon Insert, Grade 8
R
T
1
2
MOUNTING
PLATE
LOCKNUT
WHEEL
FASTENER
THREAD
wmin
wmax
MOUNTING
PLATE
THREAD
w1
MOUNTING
PLATE
WASHER
EC
4
5
WHEEL
WASHER
HEX SIZE
H
C
WHEEL
LOCKNUT
INCH COMPONENT
Catalog Number
*A
*A
A
A
A
A
A
A
A
A
7X17-JA0
7X17-JF0
7X17-JA1
7X17-JF1
7X17-JA2
7X17-JF2
7X17-JA3
7X17-JF3
7X17-JA4
7X17-JF4
Catalog Number
(Ref.)
A
A
A
A
A
A
A
A
A
A
7X17-JA0
7X17-JF0
7X17-JA1
7X17-JF1
7X17-JA2
7X17-JF2
7X17-JA3
7X17-JF3
7X17-JA4
7X17-JF4
Size
0
0
1
1
2
2
3
3
4
4
Size
0
0
1
1
2
2
3
3
4
4
d
D
C
H
L
w1
Outside Journal Mounting Wheel
EC Head
Clearance Overall Dia.
Plate Fastener Adjustment
Dia.
Offset Height Length Length +.0000
+.000
Thread Thread Flat Width
.010
.012
.024
.042
.060
Hex
Size
3/8
3/8
7/16
7/16
9/16
9/16
3/4
3/4
7/8
7/8
.250
.250
.250
.250
.281
.281
.375
.375
.437
.437
.635
.635
.695
.695
.966
.966
1.275
1.275
1.537
1.537
Mounting
Plate Width
wmax
wmin
.375
.375
.375
.375
.500
.500
.625
.625
.750
.750
.125
.125
.125
.125
.187
.187
.250
.250
.375
.375
1.38
1.38
1.44
1.44
2.03
2.03
2.53
2.53
3.04
3.04
Weight
lbs
.031
.031
.035
.035
.101
.101
.172
.172
.293
.293
-.0007
-.002
.1570
.1570
.1873
.1873
.3748
.3748
.4722
.4722
.5904
.5904
.250
.250
.250
.250
.375
.375
.437
.437
.500
.500
1/4-28
1/4-28
1/4-28
1/4-28
3/8-24
3/8-24
7/16-20
7/16-20
1/2-20
1/2-20
#8-32
#8-32
#10-32
#10-32
5/16-24
5/16-24
7/16-20
7/16-20
1/2-20
1/2-20
.125
.125
.125
.125
.250
.250
.250
.250
.312
.312
8
9
NEW
10
11
Hardware Supplied
Wheel
Washer
#8 Flat
Washer
5/16 Flat
Washer
7/16 Flat
Washer
1/2 Flat
Washer
Wheel
Locknut
#8
#8
#10
#10
5/16
5/16
7/16
7/16
1/2
1/2
Mounting
Plate
Washer
1/4 Flat
Washer
1/4 Flat
Washer
3/8 Flat
Washer
7/16 Flat
Washer
1/2 Flat
Washer
Mounting
Plate
Locknut
1/4
1/4
1/4
1/4
3/8
3/8
7/16
7/16
1/2
1/2
* Diameter D tolerance is +0/-.0005 in.
9-11
12
13
14
15
16
I
R
T
1
UTILITRAK ECONOMY CARRIAGE ASSEMBLIES

EXTREMELY LOW NOISE
EASY INSTALLATION
HIGH-SPEED OPERATION
ECONOMICAL DESIGN
Inch
MATERIAL:
Guide Wheels - Acetal Polymer

Plate - Aluminum, Clear Anodized
Bearings - Stainless Steel Ball
2
3
d OF
e DEEP
Direction of arrow, on carriage plate,

indicates how the load should be
oriented to achieve radial loading on
the two concentric guide wheels.
TxD
K
1/2 K
4
L
5
6
MR
E
C1 C
LA
MP
A
LR
MY
7
8
9
10
11
12
13
14
INCH COMPONENT
Catalog Number
A 7P86-1
A 7P86-2
Catalog Number
(Ref.)
A 7P86-1
A 7P86-2
C
L
Assy.
Assy.
Length Height
3.94
(100)
4.92
(125)
9-12
.77
(19.5)
1.04
(26.5)
E
Plate
Height
C1
Wheel
Height
.35
(9)
.51
(13)
.60
(15.2)
.82
(20.8)
G
K
Assy.
Hole
Width Spacing
1.10
(28)
1.65
(42)
1.57
(40)
1.77
(45)
T
Fast.
Size
M6 x 1
M8 x 1.25
D
Fast.
Depth
Max.
.40
(10.1)
.54
(13.7)
LR*
LA*
MY
MR
MP
Radial
Axial
Yaw
Roll
d
A
e
Working Pitch Moment
Working
Moment
C'Bore C'Bore Lubricator Load
Moment
Load
Dia.
Depth Location Capacity Capacity Capacity Capacity Capacity
lbf in. (Nm) lbf in. (Nm) lbf in. (Nm)
lbf (N)
.75
(19)
.98
(25)
.20
(5)
.33
(8.5)
* Load Capacity is based on 100 km service life.
15
16
Size
1.12
(28.4)
1.47
(37.3)
lbf (N)
39.8
(177)
49.9
(222)
20.0
(89)
39.8
(177)
88.5
(10)
159.3
(18)
26.6
(3)
70.8
(8)
17.7
(2)
35.4
(4)
UTILITRAK ECONOMY LINEAR GUIDE RAILS

EASY INSTALLATION
LIGHT WEIGHT
COMPACT ENVELOPE
ECONOMICAL
R
Inch
MATERIAL:
U-Channel Track - Aluminum, Clear Anodized
T
1
2
d THRU F
G RECOMMENDED
CL
A
S
X
H1
X
L .079
SECTION X-X
INCH COMPONENT
CATALOG NUMBER
A 7A87Size
1
2
8
Length
Code
Size
1
2
0945
9.45
(240)
1181
11.81
(300)
0472
4.72
(120)
0787
7.87
(200)
1417
14.17
(360)
1575
15.75
(400)
A
H1
End
Size
S
H
Vee
Hole
(Ref.) Width Height
Height Spacing
1
2
Length Code
1.18
(30)
1.77
(45)
.71
(18)
.87
(22)
.5
(12.8)
.6
(15.2)
1.18
(30)
1.97
(50)
2126
21.26
(540)
2362
23.62
(600)
E
Hole
Spacing
2.36
(60)
3.94
(100)
2835
28.35
(720)
3150
31.50
(800)
3780
37.80
(960)
3937
39.37
(1000)
4724
47.24
(1200)
5669
56.69
(1440)
6299
62.99
(1600)
7087
70.87
(1800)
d
G
T
F
Hole
Recommended Base
C'Bore
Diameter
Fastener
Thickness Geometry
.22
(5.5)
.35
(8.8)
Pan Head M5
Pan Head M8
.24
(6)
.28
(7)
.47 x .08 DP
(12 x 2 DP)
.79 x .12 DP
(20 x 3 DP)
10
11
12
13
14
15
9-13
REV: 01.06.12 mh
16
I
R
T
MINI-RAIL LINEAR GUIDES

QUIET RUNNING
SELF-LUBRICATING
TOLERATES SHOCK LOADS
CORROSION-RESISTANT
DAMPENS VIBRATION
Inch
H1
2
C
3
E
7
8
Size
Code
Length Code (Length in Inches)

0157
1.57
0217
2.17
0472
4.72
0591
5.91
0866
8.66
07
11
12
15
12
16
Size
Length
Code
Code
Type
A Precision .0010 .0020 running clearance. FrelonGOLD material on Rc 70 ceramic-coated aluminum
B Compensated Precision .0025 .0035 running clearance. FrelonGOLD material on Rc 70 ceramic-coated aluminum
09
15
INCH COMPONENT
CATALOG NUMBER
S64AMR-
10
14
13
H2
B1
5
6
20
0276
2.76
0295
2.95
0669
6.69
0906
9.06
1102
11.02
0335
3.35
0374
3.74
0866
8.66
1220
12.20
1339
13.39
0394
3.94
0453
4.53
1063
10.63
1693
16.93
1811
18.11
Size
(Ref.)
B1
07
09
12
15
20
.28
.35
.47
.59
.79
.31
.39
.51
.63
.98
.24
.29
.31
.37
.53
.67
.79
1.06
1.26
1.81
.94
1.18
1.34
1.65
2.44
M2
M3
M3
M3
M4
.31
.51
.59
.79
1.50
.47
.59
.79
.98
1.50
H1
H
Dia. Dia.
.17
.18
.24
.24
.37
.09
.10
.14
.14
.24
0768
7.68
1457
14.57
2638
26.38
3465
34.65
0512
5.12
0610
6.10
1260
12.60
1850
18.50
2520
25.20
H2
.09
.12
.14
.18
.33
.24
.31
.42
.56
.83
.07
.09
.18
.25
.44
.14
.18
.24
.30
.39
.09
.10
.14
.14
.16
.20
.30
.39
.59
.79
.59
.79
.98
1.57
2.36
NOTES: 1. Longer lengths are available on special order (maximum length 141.7 inches).

2. If more than one carriage is needed per track, contact our engineering department.
9-14
1083
10.83
1850
18.50
MINI-RAIL LINEAR GUIDES TECHNICAL INFORMATION

R
Inch
Size
7
9
12
15
20
Size
7
9
12
15
20
Size
7
9
12
15
20
Size
7
9
12
15
20
Force
N (lbf)
445 (100.04)
667 (149.94)
1334 (299.88)
2224 (499.96)
3559 (800.06)
Max. Static Load

N (lbf)
734 (165.00)
1557 (350.01)
1957 (439.93)
3114 (700.03)
6005 (1349.92)
T
1
2
Force
N (lbf)
89 (20.01)
125 (28.10)
222 (49.91)
356 (80.03)
578 (129.93)
Mx
My
Mz
Nm (lbf in.)
Nm (lbf in.)
Nm (lbf in.)
2.3 (20.36)
5
(44.25)
9
(79.66)
15.1 (133.65)
24.9 (220.38)
1.8 (15.93)
3.2 (28.32)
5.6 (49.56)
9 (79.66)
14.7 (130.11)
1.8 (15.93)
3.2 (28.32)
5.6 (49.56)
9 (79.66)
14.7 (130.11)
g
Mz
CL of Mz
CL of Mx
Nm (lbf in.)
Nm (lbf in.)
Mz
N (lbf)
Nm (lbf in.)
133 (29.90)
222 (49.91)
400 (89.92)
667 (149.94)
1112 (249.98)
2.3 (20.36)
5 (44.25)
9 (79.66)
15.1 (133.65)
24.9 (220.38)
1.8 (15.93)
3.2 (28.32)
5.6 (49.56)
9 (79.66)
14.7 (130.11)
1.8 (15.93)
3.2 (28.32)
5.6 (49.56)
9 (79.66)
14.7 (130.11)
Mx
Mx
Force
My
FrelonGOLD
Max. "PV"
Max. "P"
Max. "V"
(No Lubrication)
20000 (psi x ft./min.)

or
430 (kgf/cm.2 x m/min.)
10000 (psi x ft./min.)
or
215 (kgf/cm.2 x m/min.)
3000 (psi)
or
210.9 (kgf/cm.2)
1500 (psi)
or
105.45 (kgf/cm.2)
300 (ft./min.)
or
91.44 (m/min.)
140 (ft./min.)
or
42.66 (m/min.)
7
My
CL of Mx
CL of My
8
9
2x
MAX.
Plane bearings are rated by their limiting PV, which is a combination of load over a
given surface area and the velocity.
Bearing Material
Mx
Load or
Force
1x
Cantilevered Loads
Binding of the carriage
will occur if the 2:1
FrelonJ
ratio for cantilevered
loads and drive forces
PV = The performance measurement of plane bearings
is exceeded. This
2
PV = P x V where P = pressure (load) in psi (kgf/cm ), V = velocity (speed) in ft./min. (m/min.)
principle is not load
NOTES: 1. All three parameters must be met by an application for the bearing to perform properly. or force dependent.
2. Dimensions in ( ) are inch.
It is a product of the
coefficient of frictions
associated with plane
bearings.
10
11
12
13
14
15
9-15
16
I
R
T
1
2
3
4
5
6
7
8
9
10
11
12
13
SHAFTLOC
PATENTED

HOW SHAFTLOC WORKS:
Inch
Style 1
A 7Z37- series
Double-Ended
INNER SLEEVE
OUTER SLEEVE
Style 2
A 7Z39M - series
Single-Ended
Style 1:
Style 2:
one to contract.
Style 1
Double-Ended
INNER & OUTER
SLEEVES
ASSEMBLED
SHAFT
COMPONENT
Style 2
Single-Ended
Ease of assembly
Low cost

14
15
16
DID YOU KNOW?

9-16
10 - HARDWARE
R
Inch
Precision Socket Head

Shoulder Screws pg. 10-7
Socket Head Shoulder Screws

pg. 10-8
Precision Slotted Head

Shoulder Screws pg. 10-9
T
1
2
3
Slotted Head Shoulder Screws

pg. 10-10
Shallow Head Shoulder Screws

pg. 10-11
Hexagonal Nuts
pg. 10-12
4
5
Flat, Fillister and Round Head

Machine Screws pg. 10-13
Flat, Fillister, Round, & Round Washer Head Metal Core

Machine Screws Molded Nylon Exterior
pg. 10-14
6
7
8
Binding, Pan, Flat, Hexagon, Fillister & Round Head

Molded Slotted Head Machine Screws pg. 10-15
Metal Threaded Rods

pg. 10-16
9
10
Plastic Threaded Rods

pg. 10-17
Socket Head Cap Screws

Stainless Steel pg. 10-18

Steel
pg. 10-19
11
12
13

Moly Coated
pg. 10-20
Socket Head Cap Screw Kit

pg. 10-21
Hexagonal Wrenches
pg. 10-21
14
15
10-1
Nylon
pg. 10-22
Hexagonal Head Cap Screws

Nylon
pg. 10-23
Hexagonal Head Cap Screws

PVC
pg. 10-24
16
10 - HARDWARE
R
Inch
T
1
Hexagonal Nylon Insert Locknuts

pg. 10-25
Plastic Hexagonal Nuts

pg. 10-26
Hexagonal Lock Nuts

Nylon
pg. 10-27
Hexagonal Cap Nuts

Nylon
pg. 10-27
Socket Head Set Screws

Socket Head Set Screws

pg. 10-29
Half-Dog Point Socket Head

Set Screws, Steel pg. 10-30
Set Screws, Nylon Tipped

pg. 10-31
Slotted Head Set Screws

Nylon
pg. 10-32
Assembled Thumb Screw Knobs

pg. 10-33
Assembled Thumb Screw Knobs

pg. 10-34
Thumb Screw Knobs

pg. 10-35
Thumb Screw Knobs

pg. 10-35
Assorted Knob Kits

pg. 10-36
Knurled Thumb Screws

Brass
pg. 10-37
Knurled Head Thumb Screws

Nylon
pg. 10-38
Captive Thumb Screws

pg. 10-39
Precision Knurled Knobs

Oval Handles
pg. 10-42
Chassis Handles
pg. 10-42
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
10-2
Precision Handcranks
Aluminum pg. 10-41
10 - HARDWARE
R
Inch
Round Handles
pg. 10-43
End Ferrules
pg. 10-43
Molded Screw Insulators

Nylon
pg. 10-44
T
1
2
3
Shaft Spacers
Stainless Steel pgs. 10-45 & 10-46
Outer Race Shim Spacer

Shim Spacers
Laminated Brass pg. 10-47
4
5
Arbor Spacers
Strip Steel pg. 10-48
Arbor Shims
Strip Steel pg. 10-49
Thread & Bolt Size Shims

Spring Steel
pg. 10-50
6
7
8
Precision Washers
Flat Washers
Sintered Thrust Washers

Bronze
pg. 10-52
9
10
Sintered Thrust Washers

"S" Series
pg. 10-53
Nonmetallic Flat Washers

pg. 10-54
Insulating Washers
pg. 10-55
11
12
13
Molded Shoulder Washers

Nylon
pg. 10-56
Countersunk Finishing Washers

Nylon
pg. 10-56
Belleville Spring Washers

pg. 10-57
14
15
10-3
Curved Spring Washers
pg. 10-58
Wave Spring Washers

Thin Wall Series pg. 10-59
Wave Spring Washers

Screw Size Series pg. 10-59
16
10 - HARDWARE
R
Inch
Split Lock Washers

pg. 10-60
Lock Washers
Bearing Retainers
Steel, Zinc Plated pg. 10-62
External Retaining Rings

Bowed & Groovless pg. 10-63


pg. 10-65
Internal Retaining Rings

pg. 10-67

Snap-On Design pg. 10-68
External E-Rings
pg. 10-69
1
2
3
4
5
6
7
8
Precision Dowel Pins

Hardened Standard Dowel Pins Precision Ground Standard Dowel Pins

Stainless Steel
pg. 10-71 Steel
pg. 10-72
10
11
Roll Pins
Roll Pins
Spring Steel pg. 10-74
Precision Standard-Duty Spirol Pins

Stainless Steel
pg. 10-75
Medium-Duty Spirol Pins

Hardened Steel pg. 10-76
Precision Groove Pins

Groove Pins
Precision Taper Pins

Taper Pins
Steel pg. 10-80
Cotter Pins
12
13
14
15
16
10-4
10 - HARDWARE
R
Inch
Internal Hitch Pins

pg. 10-82
External Hitch Pins

pg. 10-82
Precision Disc Dials

Clockwise pg. 10-83
T
1
2
3
Precision Drum Dials

Counterclockwise pg. 10-84
Precision Disc Dials

Counterclockwise pg. 10-84
Precision Drum Dials

Clockwise pg. 10-85
4
5
Vernier & Drum Dial Sets

pg. 10-86
Vernier & Disc Dial Sets

pg. 10-86
Precision Indexes
pg. 10-87
6
7
8
Precision Drum Dial Indexes

pg. 10-87
Precision Disc Dial Indexes

pg. 10-87
Spring Posts
9
10
Extension Springs
Compression Springs
Left-hand Wound Torsion Springs

Stainless Steel
pg. 10-93
11
12
13
Anti-Backlash Torsion Springs

Stainless Steel
pg. 10-93
Round Spacers
pg. 10-94
14
15
10-5
Threaded Round Spacers
pg. 10-95
Hexagonal Threaded Spacers

pg. 10-96
16
10 - HARDWARE
R
Inch
T
1
Square Threaded Spacers

Aluminum
pg. 10-96
Round Stand-Offs
5/32 O.D. pg. 10-97
Round Stand-Offs
1/4 O.D. pg. 10-98
Hexagonal Stand-Offs
Hexagonal Stand-Offs
Brass
pg. 10-100
Chassis Fasteners
pg. 10-101
2
3
4
5
6
Panel Bushings
pg. 10-102
7
8
9
10
11
12
13
14
15
16
10-6
PRECISION SOCKET HEAD SHOULDER SCREWS

CLASS 3A THREAD
MATERIAL:
303 Stainless Steel
Inch
H
O.D.
S7092Y-G44-0404
S7092Y-G44-0406
S7092Y-G44-0408
S7092Y-G44-0410
S7092Y-G44-0412
S7092Y-G44-0604
S7092Y-G44-0606
S7092Y-G44-0608
S7092Y-G44-0610
S7092Y-G44-0612
S7092Y-G44-0616
S7092Y-G44-0620
S7092Y-G44-0624
S7092Y-G44-0632
S7092Y-G44-0640
S7092Y-G44-0648
S7092Y-G44-0804
S7092Y-G44-0806
S7092Y-G44-0808
S7092Y-G44-0810
S7092Y-G44-0812
S7092Y-G44-0816
S7092Y-G44-0820
S7092Y-G44-0824
S7092Y-G44-0832
S7092Y-G44-0840
S7092Y-G44-0848
S7092Y-G44-1008
S7092Y-G44-1010
S7092Y-G44-1012
S7092Y-G44-1016
S7092Y-G44-1020
S7092Y-G44-1024
S7092Y-G44-1210
S7092Y-G44-1212
S7092Y-G44-1216
S7092Y-G44-1220
S7092Y-G44-1210A
S7092Y-G44-1212A
S7092Y-G44-1216A
S7092Y-G44-1220A
S7092Y-G44-1616
S7092Y-G44-1620
S7092Y-G44-1624
S7092Y-G44-1632
d
Thread
Size
#4-40
UNC-3A
#8-32
UNC-3A
#10-32
UNF-3A
1/4-20
UNC-3A
5/16-18
UNC-3A
3/8-16
UNC-3A
1
Precision
Component
45 CHAMFER
(BOTH ENDS)
.01
E
Dia.
.0005
.01
.001
.01
.250
.250
.250
.250
.250
.313
.313
.313
.313
.313
.313
.313
.313
.313
.313
.313
.375
.375
.375
.375
.375
.375
.375
.375
.375
.375
.375
.500
.500
.500
.500
.500
.500
.500
.500
.500
.500
.563
.563
.563
.563
.750
.750
.750
.750
.1240
.1240
.1240
.1240
.1240
.1865
.1865
.1865
.1865
.1865
.1865
.1865
.1865
.1865
.1865
.1865
.2490
.2490
.2490
.2490
.2490
.2490
.2490
.2490
.2490
.2490
.2490
.3115
.3115
.3115
.3115
.3115
.3115
.3740
.3740
.3740
.3740
.3740
.3740
.3740
.3740
.4990
.4990
.4990
.4990
.125
.125
.125
.125
.125
.156
.156
.156
.156
.156
.156
.156
.156
.156
.156
.156
.188
.188
.188
.188
.188
.188
.188
.188
.188
.188
.188
.219
.219
.219
.219
.219
.219
.219
.219
.219
.219
.250
.250
.250
.250
.313
.313
.313
.313
.1265
.1890
.2515
.3140
.3765
.1265
.1890
.2515
.3140
.3765
.5015
.6265
.7515
1.0015
1.2515
1.5015
.1265
.1890
.2515
.3140
.3765
.5015
.6265
.7515
1.0015
1.2515
1.5015
.2515
.3140
.3765
.5015
.6265
.7515
.3140
.3765
.5015
.6265
.3140
.3765
.5015
.6265
.5015
.6265
.7515
1.0015
.156
.156
.156
.156
.156
.188
.188
.188
.188
.188
.188
.188
.188
.188
.188
.188
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
.438
.438
.438
.438
.438
.438
.438
.438
.438
.438
.500
.500
.500
.500
.625
.625
.625
.625
5/64
5/64
5/64
5/64
5/64
3/32
3/32
3/32
3/32
3/32
3/32
3/32
3/32
3/32
3/32
3/32
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
5/32
5/32
5/32
5/32
5/32
5/32
5/32
5/32
5/32
5/32
3/16
3/16
3/16
3/16
1/4
1/4
1/4
1/4
1/16
1/16
1/16
1/16
1/16
5/64
5/64
5/64
5/64
5/64
5/64
5/64
5/64
5/64
5/64
5/64
3/32
3/32
3/32
3/32
3/32
3/32
3/32
3/32
3/32
3/32
3/32
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
5/32
5/32
5/32
5/32
3/16
3/16
3/16
3/16
O.D.
T
1
d E
INCH COMPONENT
Catalog Number
10-7
3
4
5
6
7
8
9
10
11
12
13
14
15
16
SOCKET HEAD SHOULDER SCREWS

ANSI/ASME B 18.31986
MATERIAL:
303 Stainless Steel
Inch
O.D.
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Catalog Number
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
9X25-0404
9X25-0406
9X25-0408
9X25-0410
9X25-0412
9X25-0604
9X25-0606
9X25-0608
9X25-0610
9X25-0612
9X25-0616
9X25-0620
9X25-0624
9X25-0632
9X25-0640
9X25-0648
9X25-0804
9X25-0806
9X25-0808
9X25-0810
9X25-0812
9X25-0816
9X25-0820
9X25-0824
9X25-0832
9X25-0840
9X25-0848
9X25-1008
9X25-1010
9X25-1012
9X25-1016
9X25-1020
9X25-1024
9X25-1210
9X25-1212
9X25-1216
9X25-1220
9X25-1210A
9X25-1212A
9X25-1216A
9X25-1220A
9X25-1616
9X25-1620
9X25-1624
9X25-1632
10-8
d
Thread
Size
O.D.
#4-40
#4-40
#4-40
#4-40
#4-40
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#10-32
#10-32
#10-32
#10-32
#10-32
#10-32
#10-32
#10-32
#10-32
#10-32
#10-32
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
5/16-18
5/16-18
5/16-18
5/16-18
3/8-16
3/8-16
3/8-16
3/8-16
1/4
1/4
1/4
1/4
1/4
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
9/16
9/16
9/16
9/16
3/4
3/4
3/4
3/4
E
Dia.
+.000
-.003
.125
.125
.125
.125
.125
.187
.187
.187
.187
.187
.187
.187
.187
.187
.187
.187
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
.312
.312
.312
.312
.312
.312
.375
.375
.375
.375
.375
.375
.375
.375
.500
.500
.500
.500
45 CHAMFER
(BOTH ENDS)
INCH COMPONENT
+.005
-.000
U
Min.
1/8
1/8
1/8
1/8
1/8
5/32
5/32
5/32
5/32
5/32
5/32
5/32
5/32
5/32
5/32
5/32
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
7/32
7/32
7/32
7/32
7/32
7/32
7/32
7/32
7/32
7/32
1/4
1/4
1/4
1/4
5/16
5/16
5/16
5/16
.125
.188
.250
.312
.375
.125
.188
.250
.312
.375
.500
.625
.750
1.000
1.250
1.500
.125
.188
.250
.312
.375
.500
.625
.750
1.000
1.250
1.500
.250
.312
.375
.500
.625
.750
.312
.375
.500
.625
.312
.375
.500
.625
.500
.625
.750
1.000
5/32
5/32
5/32
5/32
5/32
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
7/16
7/16
7/16
7/16
7/16
7/16
7/16
7/16
7/16
7/16
1/2
1/2
1/2
1/2
5/8
5/8
5/8
5/8
5/64
5/64
5/64
5/64
5/64
3/32
3/32
3/32
3/32
3/32
3/32
3/32
3/32
3/32
3/32
3/32
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
5/32
5/32
5/32
5/32
5/32
5/32
5/32
5/32
5/32
5/32
3/16
3/16
3/16
3/16
1/4
1/4
1/4
1/4
1/16
1/16
1/16
1/16
1/16
5/64
5/64
5/64
5/64
5/64
5/64
5/64
5/64
5/64
5/64
5/64
3/32
3/32
3/32
3/32
3/32
3/32
3/32
3/32
3/32
3/32
3/32
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
5/32
5/32
5/32
5/32
3/16
3/16
3/16
3/16
PRECISION SLOTTED HEAD SHOULDER SCREWS

CLASS 3A THREAD
MATERIAL:
303 Stainless Steel
Inch
0
H
Catalog Number
S7092Y-G42-0404
S7092Y-G42-0406
S7092Y-G42-0408
S7092Y-G42-0410
S7092Y-G42-0412
S7094Y-G42-0604
S7094Y-G42-0606
S7094Y-G42-0608
S7094Y-G42-0610
S7094Y-G42-0612
S7094Y-G42-0616
S7094Y-G42-0620
S7094Y-G42-0624
S7094Y-G42-0632
S7094Y-G42-0640
S7094Y-G42-0648
S7095Y-G42-0804
S7095Y-G42-0806
S7095Y-G42-0808
S7095Y-G42-0810
S7095Y-G42-0812
S7095Y-G42-0816
S7095Y-G42-0820
S7095Y-G42-0824
S7095Y-G42-0832
S7095Y-G42-0840
S7095Y-G42-0848
S7096Y-G42-1008
S7096Y-G42-1010
S7096Y-G42-1012
S7096Y-G42-1016
S7096Y-G42-1020
S7096Y-G42-1024
S7096Y-G42-1210
S7096Y-G42-1212
S7096Y-G42-1216
S7096Y-G42-1220
S7097Y-G42-1210A
S7097Y-G42-1212A
S7097Y-G42-1216A
S7097Y-G42-1220A
S7098Y-G42-1616
S7098Y-G42-1620
S7098Y-G42-1624
S7098Y-G42-1632
SAW
SLOT
d
Thread
Size
#4-40
UNC-3A
#8-32
UNC-3A
#10-32
UNF-3A
1/4-20
UNC-3A
5/16-18
UNC-3A
3/8-16
UNC-3A
O.D.
.01
.250
.250
.250
.250
.250
.313
.313
.313
.313
.313
.313
.313
.313
.313
.313
.313
.375
.375
.375
.375
.375
.375
.375
.375
.375
.375
.375
.500
.500
.500
.500
.500
.500
.500
.500
.500
.500
.563
.563
.563
.563
.750
.750
.750
.750
45 CHAMFER
(BOTH ENDS)
E
Dia.
.01
.001
.01
.1240
.1240
.1240
.1240
.1240
.1865
.1865
.1865
.1865
.1865
.1865
.1865
.1865
.1865
.1865
.1865
.2490
.2490
.2490
.2490
.2490
.2490
.2490
.2490
.2490
.2490
.2490
.3115
.3115
.3115
.3115
.3115
.3115
.3740
.3740
.3740
.3740
.3740
.3740
.3740
.3740
.4990
.4990
.4990
.4990
.125
.125
.125
.125
.125
.156
.156
.156
.156
.156
.156
.156
.156
.156
.156
.156
.188
.188
.188
.188
.188
.188
.188
.188
.188
.188
.188
.219
.219
.219
.219
.219
.219
.219
.219
.219
.219
.250
.250
.250
.250
.313
.313
.313
.313
.1265
.1890
.2515
.3140
.3765
.1265
.1890
.2515
.3140
.3765
.5015
.6265
.7515
1.0015
1.2515
1.5015
.1265
.1890
.2515
.3140
.3765
.5015
.6265
.7515
1.0015
1.2515
1.5015
.2515
.3140
.3765
.5015
.6265
.7515
.3140
.3765
.5015
.6265
.3140
.3765
.5015
.6265
.5015
.6265
.7515
1.0015
.156
.156
.156
.156
.156
.188
.188
.188
.188
.188
.188
.188
.188
.188
.188
.188
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
.438
.438
.438
.438
.438
.438
.438
.438
.438
.438
.500
.500
.500
.500
.625
.625
.625
.625
.0005
T
1
O.D.
INCH COMPONENT
1
Precision
Component
10-9
3
4
5
6
7
8
9
10
11
12
13
14
15
16
SLOTTED HEAD SHOULDER SCREWS

MATERIAL:
303 Stainless Steel
Inch
1
H
2
D
SAW SLOT
45 CHAMFER
(BOTH ENDS)
4
5
6
7
8
9
10
11
12
13
INCH COMPONENT
Catalog Number
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
9X15-0404
9X15-0406
9X15-0408
9X15-0410
9X15-0412
9X15-0604
9X15-0606
9X15-0608
9X15-0610
9X15-0612
9X15-0616
9X15-0620
9X15-0624
9X15-0632
9X15-0640
9X15-0648
9X15-0804
9X15-0806
9X15-0808
9X15-0810
9X15-0812
9X15-0816
9X15-0820
9X15-0824
9X15-0832
9X15-0840
9X15-0848
14
15
16
10-10
d
Thread
Size
D
Dia.
#4-40
#4-40
#4-40
#4-40
#4-40
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#10-32
#10-32
#10-32
#10-32
#10-32
#10-32
#10-32
#10-32
#10-32
#10-32
#10-32
1/4
1/4
1/4
1/4
1/4
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
E
Dia.
+.000
-.004
.124
.124
.124
.124
.124
.187
.187
.187
.187
.187
.187
.187
.187
.187
.187
.187
.249
.249
.249
.249
.249
.249
.249
.249
.249
.249
.249
.005
1/8
1/8
1/8
1/8
1/8
5/32
5/32
5/32
5/32
5/32
5/32
5/32
5/32
5/32
5/32
5/32
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
.125
.188
.250
.313
.375
.125
.188
.250
.313
.375
.500
.625
.750
1.000
1.250
1.500
.125
.188
.250
.313
.375
.500
.625
.750
1.000
1.250
1.500
5/32
5/32
5/32
5/32
5/32
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
SHALLOW HEAD SHOULDER SCREWS

SLOTTED HEAD
MATERIAL:
303 Stainless Steel
Inch
T
1
1/16
1-1/2
THREADS
2
E
.002
T.I.R.
45 CHAMFER
(BOTH ENDS)
4
INCH COMPONENT
Catalog Number
A
A
A
A
A
A
A
7Y
7Y
7Y
7Y
7Y
7Y
7Y
5-CF1
5-CF3
5-CF2
5-CF4
5-CF5
5-CF6
5-CF7
d
Thread
Size
D
Dia.
#2-56
#2-56
#4-40
#4-40
#8-32
#10-32
1/4-20
3/16
7/32
3/16
1/4
5/16
3/8
9/16
E
Dia.
+.000
-.001
.0935
.0935
.1248
.1248
.1873
.2498
.3748
.130
.130
.099
.146
.186
.186
.270
7/16
7/16
29/64
17/32
11/16
49/64
1-1/64
5
6
7
8
9
10
11
12
13
14
15
10-11
16
HEXAGONAL NUTS
MATERIAL:
Alloy Steel or 18-8 Stainless Steel
FINISH:
Inch
Alloy Steel, Zinc Plated
SPECIFICATION:
1
Fig. 1
Fig. 2
2
B
3
A
4
5
6
7
8
9
10
INCH COMPONENT
Catalog Number
Fig. 1 Alloy Steel, Zinc Plated
A 9Q18-080
A 9Q18-256
A 9Q18-440
A 9Q18-632
A 9Q18-832
A 9Q18-024
A 9Q18-032
A 9Q18-120
A 9Q18-518
Fig. 2 18-8 Stainless Steel
A 9X18-080
A 9X18-256
A 9X18-440
A 9X18-632
A 9X18-832
A 9X18-032
A 9X18-120
11
12
13
14
15
16
10-12
Thread
Size
+.00
-.01
+.000
-.015
+.000
-.015
#0-80
#2-56
#4-40
#6-32
#8-32
#10-24
#10-32
1/4-20
5/16-18
.156
.188
.250
.312
.344
.375
.375
.438
.500
.180
.217
.289
.361
.397
.433
.433
.505
.577
.050
.066
.098
.114
.130
.130
.130
.193
.258
#0-80
#2-56
#4-40
#6-32
#8-32
#10-32
1/4-20
.156
.188
.250
.312
.344
.375
.438
.180
.217
.289
.361
.397
.433
.505
.050
.066
.098
.114
.130
.130
.193
MACHINE SCREWS
FLAT HEAD
FILLISTER HEAD
ROUND HEAD
R
Inch
MATERIAL:
18-8 Stainless Steel
SPECIFICATION:
L*
T
1
* Length of flat head screws

include head height.
INCH COMPONENT
Catalog Number
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
Flat Head
Fillister Head
9X16-F008002
9X16-F008003
9X16-F008004
9X16-F008005
9X16-F008006
9X16-F008008
9X16-F025603
9X16-F025604
9X16-F025605
9X16-F025606
9X16-F025608
9X16-F044003
9X16-F044004
9X16-F044005
9X16-F044006
9X16-F044008
9X16-F044010
9X16-F063203
9X16-F063204
9X16-F063205
9X16-F063206
9X16-F063208
9X16-F063210
9X16-F063212
9X16-F083204
9X16-F083205
9X16-F083206
9X16-F083210
9X16-F083216
9X16-F103204
9X16-F103208
9X16-F103212
9X16-F103216
9X16-F252004
9X16-F252006
9X16-F252008
9X16-F252010
9X16-F252012
9X16-F252016
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
9X16-P008002
9X16-P008003
9X16-P008004
9X16-P008005
9X16-P008006
9X16-P008008
9X16-P025603
9X16-P025604
9X16-P025605
9X16-P025606
9X16-P025608
9X16-P044003
9X16-P044004
9X16-P044005
9X16-P044006
9X16-P044008
9X16-P044010
9X16-P063203
9X16-P063204
9X16-P063205
9X16-P063206
9X16-P063210
9X16-P063212
9X16-P083204
9X16-P083206
9X16-P083208
9X16-P083210
9X16-P083212
9X16-P103204
9X16-P103205
9X16-P103208
9X16-P103210
9X16-P103216
9X16-P252004
9X16-P252005
9X16-P252006
9X16-P252008
9X16-P252010
9X16-P252012
9X16-P252016
Round Head
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
9X16-R008002
9X16-R008003
9X16-R008004
9X16-R008005
9X16-R008006
9X16-R008008
9X16-R025603
9X16-R025604
9X16-R025605
9X16-R025606
9X16-R025608
9X16-R044003
9X16-R044004
9X16-R044005
9X16-R044006
9X16-R044008
9X16-R044010
9X16-R063203
9X16-R063204
9X16-R063205
9X16-R063206
9X16-R063208
9X16-R063210
9X16-R063212
9X16-R083204
9X16-R083208
9X16-R083210
9X16-R083212
9X16-R083216
9X16-R103204
9X16-R103205
9X16-R103206
9X16-R103208
9X16-R103210
9X16-R103212
9X16-R103216
9X16-R252006
9X16-R252012
9X16-R252016
Thread
Size
L
Length
#0-80
#0-80
#0-80
#0-80
#0-80
#0-80
#2-56
#2-56
#2-56
#2-56
#2-56
#4-40
#4-40
#4-40
#4-40
#4-40
#4-40
#6-32
#6-32
#6-32
#6-32
#6-32
#6-32
#6-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#10-32
#10-32
#10-32
#10-32
#10-32
#10-32
#10-32
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/8
3/16
1/4
5/16
3/8
1/2
3/16
1/4
5/16
3/8
1/2
3/16
1/4
5/16
3/8
1/2
5/8
3/16
1/4
5/16
3/8
1/2
5/8
3/4
1/4
5/16
3/8
1/2
5/8
3/4
1
1/4
5/16
3/8
1/2
5/8
3/4
1
1/4
5/16
3/8
1/2
5/8
3/4
1
10-13
3
4
5
6
7
8
9
10
11
12
13
14
15
16
I
R
MOLDED NYLON - METAL CORE MACHINE SCREWS

NONCONDUCTIVE
NONCORROSIVE
VIBRATION-RESISTANT
RECESSED HEAD
Inch
MATERIAL:
SPECIFICATION:
Shell - Nylon 6/6, Natural

Core - Steel, Hi-Carbon, Knurled & Plated
2
L*
3
4
5
6
7
* L DIMENSIONS ON FLAT HEAD

SCREWS INCLUDES HEAD HEIGHT.
PERFORMANCE DATA:
Thread Max. Torque Ultimate
Before
Size
Torque
Ref. Deformation
lbf in.
lbf in.
#6-32
#8-32
#10-32
1/4-20
1
3
5
12
Double Shear
Tensile Test
1.5
4.0
6.0
13.0
Yield
lbf
Break
lbf
Yield
lbf
Break
lbf
24
66
96
120
32
72
104
174
200
300
600
1400
240
360
640
1600
INCH COMPONENT
Catalog Number
8
9
10
11
12
13
14
15
16
Flat Head 82
Fillister Head
A 9Z50-F063204
A 9Z50-F063208
A 9Z50-F063210
A 9Z50-F083206
A 9Z50-F083208
A 9Z50-F083212
A 9Z50-F083216
A 9Z50-F103206
A 9Z50-F142006
A 9Z50-F142008
A 9Z50-F142010
A 9Z50-F142016
A 9Z50-P063206
A 9Z50-P063210
A 9Z50-P083206
A 9Z50-P083212
A 9Z50-P083216
A 9Z50-P103206
A 9Z50-P103212
A 9Z50-P142008
A 9Z50-P142010
A 9Z50-P124016
Round Washer
Head
Round Head
A
A
A
A
A
A
A
A
9Z50-R083206
9Z50-R083208
9Z50-R103206
9Z50-R142006
9Z50-R142008
9Z50-R142010
9Z50-R142012
9Z50-R124016
A 9Z50-W063204
A 9Z50-W083206
A 9Z50-W083212
A 9Z50-W083216
A 9Z50-W103206
A 9Z50-W142012
Thread
Size
L
Length
#6-32
#6-32
#6-32
#6-32
#8-32
#8-32
#8-32
#8-32
#10-32
#10-32
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4
3/8
1/2
5/8
3/8
1/2
3/4
1
3/8
3/4
3/8
1/2
5/8
3/4
1
Flat
Head
Fillister
Head
Thread
Size
Ref.
Dia.
Height
#6-32
#8-32
#10-32
1/4-20
.265
.305
.365
.510
.085
.100
.120
.155
10-14
Dia.
.225
.260
.300
.400
Height
.135
.140
.160
.220
Round Washer Head
Round
Head
Dia.
.255
.300
.340
.450
Height
.095
.120
.130
.165
Head
Dia.
.230
.265
.315
.460
Height
.100
.110
.130
.175
Washer
Dia.
.300
.370
.425
.550
Thick.
.025
.032
.036
.056
MOLDED SLOTTED HEAD MACHINE SCREWS

NONCONDUCTIVE
NONCORROSIVE
VIBRATION-RESISTANT
LIGHTWEIGHT
R
Inch
MATERIAL:
Nylon (Zytel 101)
HEAD STYLE CODE:

B
D
F
H
P
R
T
1
Binding Head
Pan Head
Flat Head
Hexagon Head
Fillister Head
Round Head
SPECIFICATION:

H
4
INCH COMPONENT
Catalog Number
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
9M509M509M509M509M509M509M509M509M509M509M509M509M509M509M509M509M509M509M509M509M509M509M509M509M509M509M509M509M509M509M509M509M509M50-
025602
025603
025604
025605
025606
025608
025610
025612
025616
044002
044003
044004
044005
044006
044008
044010
044012
044014
044016
063203
063204
063205
063206
063207
063208
063210
063212
063214
063216
063220
083202
083204
083205
083206
Thread
Size
Length *
#2-56
#2-56
#2-56
#2-56
#2-56
#2-56
#2-56
#2-56
#2-56
#4-40
#4-40
#4-40
#4-40
#4-40
#4-40
#4-40
#4-40
#4-40
#4-40
#6-32
#6-32
#6-32
#6-32
#6-32
#6-32
#6-32
#6-32
#6-32
#6-32
#6-32
#8-32
#8-32
#8-32
#8-32
1/8
3/16
1/4
5/16
3/8
1/2
5/8
3/4
1
1/8
3/16
1/4
5/16
3/8
1/2
5/8
3/4
7/8
1
3/16
1/4
5/16
3/8
7/16
1/2
5/8
3/4
7/8
1
1-1/4
1/8
1/4
5/16
3/8
Catalog Number
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
9M509M509M509M509M509M509M509M509M509M509M509M509M509M509M509M509M509M509M509M509M509M509M509M509M509M509M509M509M509M509M509M509M50-
083208
083210
083212
083214
083216
083220
083224
102404
102406
102408
102410
102412
102416
102424
103204
103205
103206
103208
103210
103212
103216
103220
103224
103228
252004
252006
252008
252010
252012
252016
252020
252024
252032
Thread
Size
Length *
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#10-24
#10-24
#10-24
#10-24
#10-24
#10-24
#10-24
#10-32
#10-32
#10-32
#10-32
#10-32
#10-32
#10-32
#10-32
#10-32
#10-32
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/2
5/8
3/4
7/8
1
1-1/4
1-1/2
1/4
3/8
1/2
5/8
3/4
1
1-1/2
1/4
5/16
3/8
1/2
5/8
3/4
1
1-1/4
1-1/2
1-3/4
1/4
3/8
1/2
5/8
3/4
1
1-1/4
1-1/2
2
* Length of flat head screws includes head height.

All combinations of head style, thread size and length are not available.
See sdp-si.com/estore or contact sales department.
5
6
7
8
9
10
11
12
13
14
15
10-15
16
METAL THREADED RODS

MATERIAL:
Aluminum, Brass, Mild Steel or Stainless Steel
SPECIFICATION:
Inch
Priced Per 3-Foot Rod
1
2
INCH COMPONENT
Catalog Number
Aluminum
4
5
6
7
A
A
A
A
A
A
A
A
A
9A60-1024
9A60-1032
9A60-2520
9A60-3118
9A60-3716
9A60-5013
9A60-6211
9A60-7510
9A60-9908
8
9
10
11
12
13
14
15
16
10-16
A
A
A
A
A
A
A
A
A
A
A
A
A
Brass
Mild Steel
9B60-0440
9B60-0632
9B60-0832
9B60-1024
9B60-1032
9B60-2520
9B60-2528
9B60-3118
9B60-3716
9B60-5013
9B60-6211
9B60-7510
9B60-9908
A
A
A
A
A
A
A
A
A
A
A
A
A
9C60-0440
9C60-0632
9C60-0832
9C60-1024
9C60-1032
9C60-2520
9C60-2528
9C60-3118
9C60-3716
9C60-5013
9C60-6211
9C60-7510
9C60-9908
Stainless Steel
A
A
A
A
A
A
A
A
A
A
A
A
A
9X60-0440
9X60-0632
9X60-0832
9X60-1024
9X60-1032
9X60-2520
9X60-2528
9X60-3118
9X60-3716
9X60-5013
9X60-6211
9X60-7510
9X60-9908
Thread
Size
#4-40
#6-32
#8-32
#10-24
#10-32
1/4-20
1/4-28
5/16-18
3/8-16
1/2-13
5/8-11
3/4-10
1-8
PLASTIC THREADED RODS

LIGHTWEIGHT
NONCORROSIVE
VIBRATION-RESISTANT
NONCONDUCTIVE
ANTIMAGNETIC
R
Inch
MATERIAL:
Nylon (Zytel 101) or

Polyvinyl Chloride (PVC)
1
2
INCH COMPONENT
Catalog Number
Nylon (Zytel 101) - Priced Per Foot
A 9M60-0440
A 9M60-0632
A 9M60-0832
A 9M60-1024
A 9M60-1032
A 9M60-2520
A 9M60-3118
A 9M60-5013
A 9M60-6211
A 9M60-7510
Polyvinyl Chloride (PVC) - Priced Per Piece
A 9M61-2520S
A 9M61-2520L
A 9M61-3716S
A 9M61-3716L
Thread
Size
Length
ft.
#4-40
#6-32
#8-32
#10-24
#10-32
1/4-20
5/16-18
1/2-13
5/8-11
3/4-10
1/4-20
1/4-20
3/8-16
3/8-16
5
10
5
10
3
4
5
6
7
8
9
10
11
12
13
14
15
10-17
16
SOCKET HEAD CAP SCREWS

MATERIAL:
303 Stainless Steel
SPECIFICATION:
Inch
KNURL*
O.D.
2
L
3
4
5
6
7
8
9
10
11
12
13
Thread Size
Ref.
O.D.
Max.
B
Max.
C
Max.
D
Nom.
E
Min.
#0-80
#2-56
#4-40
#6-32
#8-32
#10-32
.096
.140
.183
.226
.270
.312
.060
.086
.112
.138
.164
.190
.060
.086
.112
.138
.164
.190
.050
5/64
3/32
7/64
9/64
5/32
.025
.038
.051
.064
.077
.090
INCH COMPONENT
Catalog Number
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
9X26-008004
9X26-008006
9X26-008008
9X26-025604
9X26-025606
9X26-025608
9X26-025610
9X26-025612
9X26-025616
9X26-044006
9X26-044008
9X26-044010
9X26-044012
9X26-044014
9X26-044016
9X26-044020
9X26-063206
9X26-063208
9X26-063210
9X26-063212
9X26-063214
14
15
16
* Head may be supplied with or

without knurl at SDP option.
10-18
d
Thread
Size
L
Length
#0-80
#0-80
#0-80
#2-56
#2-56
#2-56
#2-56
#2-56
#2-56
#4-40
#4-40
#4-40
#4-40
#4-40
#4-40
#4-40
#6-32
#6-32
#6-32
#6-32
#6-32
1/8
3/16
1/4
1/8
3/16
1/4
5/16
3/8
1/2
3/16
1/4
5/16
3/8
7/16
1/2
5/8
3/16
1/4
5/16
3/8
7/16
Catalog Number
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
9X26-063216
9X26-063220
9X26-063224
9X26-083208
9X26-083210
9X26-083212
9X26-083214
9X26-083216
9X26-083220
9X26-083224
9X26-083228
9X26-083232
9X26-103208
9X26-103210
9X26-103212
9X26-103214
9X26-103216
9X26-103220
9X26-103224
9X26-103228
9X26-103232
d
Thread
Size
L
Length
#6-32
#6-32
#6-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#10-32
#10-32
#10-32
#10-32
#10-32
#10-32
#10-32
#10-32
#10-32
1/2
5/8
3/4
1/4
5/16
3/8
7/16
1/2
5/8
3/4
7/8
1
1/4
5/16
3/8
7/16
1/2
5/8
3/4
7/8
1
SOCKET HEAD CAP SCREWS

MATERIAL:
Alloy Steel, Black Oxide
SPECIFICATION:
Inch

d
KNURL*
O.D.
2
D
INCH COMPONENT
Catalog Number
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
9Q26-025608
9Q26-025612
9Q26-034812
9Q26-034816
9Q26-044008
9Q26-044012
9Q26-044016
9Q26-044024
9Q26-063208
9Q26-063216
9Q26-063220
9Q26-063224
9Q26-064008
9Q26-064016
9Q26-064020
9Q26-064024
9Q26-083212
9Q26-083216
9Q26-083224
9Q26-083232
9Q26-102416
9Q26-102420
9Q26-102424
9Q26-102432
9Q26-103212
9Q26-103216
9Q26-103224
9Q26-103232
9Q26-252016
9Q26-252024
9Q26-252032
9Q26-252048
9Q26-311816
9Q26-311824
9Q26-311832
9Q26-311848
9Q26-311856
9Q26-371624
9Q26-371632
9Q26-371648
d
Thread
Size
L
Length
O.D.
Max.
B
Max.
C
Max.
D
Nom.
E
Min.
#2-56
#2-56
#3-48
#3-48
#4-40
#4-40
#4-40
#4-40
#6-32
#6-32
#6-32
#6-32
#6-40
#6-40
#6-40
#6-40
#8-32
#8-32
#8-32
#8-32
#10-24
#10-24
#10-24
#10-24
#10-32
#10-32
#10-32
#10-32
1/4-20
1/4-20
1/4-20
1/4-20
5/16-18
5/16-18
5/16-18
5/16-18
5/16-18
3/8-16
3/8-16
3/8-16
1/4
3/8
3/8
1/2
1/4
3/8
1/2
3/4
1/4
1/2
5/8
3/4
1/4
1/2
5/8
3/4
3/8
1/2
3/4
1
1/2
5/8
3/4
1
3/8
1/2
3/4
1
1/2
3/4
1
1-1/2
1/2
3/4
1
1-1/2
1-3/4
3/4
1
1-1/2
.140
.140
.161
.161
.183
.183
.183
.183
.226
.226
.226
.226
.226
.226
.226
.226
.270
.270
.270
.270
.312
.312
.312
.312
.312
.312
.312
.312
.375
.375
.375
.375
.468
.468
.468
.468
.468
.562
.562
.562
.086
.086
.099
.099
.112
.112
.112
.112
.138
.138
.138
.138
.138
.138
.138
.138
.164
.164
.164
.164
.190
.190
.190
.190
.190
.190
.190
.190
.250
.250
.250
.250
.312
.312
.312
.312
.312
.375
.375
.375
.086
.086
.099
.099
.112
.112
.112
.112
.138
.138
.138
.138
.138
.138
.138
.138
.164
.164
.164
.164
.190
.190
.190
.190
.190
.190
.190
.190
.250
.250
.250
.250
.312
.312
.312
.312
.312
.375
.375
.375
5/64
5/64
5/64
5/64
3/32
3/32
3/32
3/32
7/64
7/64
7/64
7/64
7/64
7/64
7/64
7/64
9/64
9/64
9/64
9/64
5/32
5/32
5/32
5/32
5/32
5/32
5/32
5/32
3/16
3/16
3/16
3/16
1/4
1/4
1/4
1/4
1/4
5/16
5/16
5/16
.038
.038
.044
.044
.051
.051
.051
.051
.064
.064
.064
.064
.064
.064
.064
.064
.077
.077
.077
.077
.090
.090
.090
.090
.090
.090
.090
.090
.120
.120
.120
.120
.151
.151
.151
.151
.151
.182
.182
.182
10-19
4
5
6
7
8
9
10
11
12
13
14
15
16
MOLY COATED SOCKET HEAD CAP SCREWS

MATERIAL:
R
T
1
Alloy Steel, Black Oxide, coated with

Dry Molybdenum Disulfide
Inch
SPECIFICATION:

d
KNURL*
O.D.
2
L
3
4
5
6
7
8
9
10
11
INCH COMPONENT
Catalog Number
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
9Q26-M025608
9Q26-M025612
9Q26-M034812
9Q26-M034816
9Q26-M044008
9Q26-M044012
9Q26-M044016
9Q26-M044024
9Q26-M063208
9Q26-M063216
9Q26-M063220
9Q26-M063224
9Q26-M064008
9Q26-M064016
9Q26-M064020
9Q26-M064024
9Q26-M083216
9Q26-M083224
9Q26-M083232
9Q26-M103216
9Q26-M103224
9Q26-M103232
9Q26-M252016
9Q26-M252024
9Q26-M252032
9Q26-M252048
12
13
14
15
16
10-20
d
Thread
Size
L
Length
O.D.
Max.
B
Max.
C
Max.
Dia.
D
Nom.
E
Min.
#2-56
#2-56
#3-48
#3-48
#4-40
#4-40
#4-40
#4-40
#6-32
#6-32
#6-32
#6-32
#6-40
#6-40
#6-40
#6-40
#8-32
#8-32
#8-32
#10-32
#10-32
#10-32
1/4-20
1/4-20
1/4-20
1/4-20
1/4
3/8
3/8
1/2
1/4
3/8
1/2
3/4
1/4
1/2
5/8
3/4
1/4
1/2
5/8
3/4
1/2
3/4
1
1/2
3/4
1
1/2
3/4
1
1-1/2
.140
.140
.161
.161
.183
.183
.183
.183
.226
.226
.226
.226
.226
.226
.226
.226
.270
.270
.270
.312
.312
.312
.375
.375
.375
.375
.086
.086
.099
.099
.112
.112
.112
.112
.138
.138
.138
.138
.138
.138
.138
.138
.164
.164
.164
.190
.190
.190
.250
.250
.250
.250
.086
.086
.099
.099
.112
.112
.112
.112
.138
.138
.138
.138
.138
.138
.138
.138
.164
.164
.164
.190
.190
.190
.250
.250
.250
.250
5/64
5/64
5/64
5/64
3/32
3/32
3/32
3/32
7/64
7/64
7/64
7/64
7/64
7/64
7/64
7/64
9/64
9/64
9/64
5/32
5/32
5/32
3/16
3/16
3/16
3/16
.038
.038
.044
.044
.051
.051
.051
.051
.064
.064
.064
.064
.064
.064
.064
.064
.077
.077
.077
.090
.090
.090
.120
.120
.120
.120
SOCKET HEAD CAP SCREW KIT & HEX. WRENCHES

SOCKET HEAD CAP SCREW KIT
MATERIAL:
Inch
Alloy Steel, Black Oxide
SPECIFICATION:
18 popular sizes - 360 Pieces
T
1
2
3
INCH COMPONENT
A 9Q26-KIT001
Kit Contains 20 Each of the Following

Catalog Number
#4-40 x 1/4
#4-40 x 1/2
#4-40 x 3/4
#6-32 x 1/4
#6-32 x 1/2
#6-32 x 3/4
#8-32 x 1/2
#8-32 x 3/4
#8-32 x 1
#10-32 x 1/2
#10-32 x 3/4
#10-32 x 1
1/4-20 x 1/2
1/4-20 x 3/4
1/4-20 x 1
5/16-18 x 1/2
5/16-18 x 3/4
5/16-18 x 1
5
6
7
HEXAGONAL WRENCHES
MATERIAL:
Steel, Plated
Hex Key Set available: A 4Z15-HEXSET

contains 15 keys (.028 to 3/8).
9
INCH COMPONENT
Catalog Number
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
4T15-028
4T15-035
4T15-050
4T15-062
4T15-078
4T15-094
4T15-109
4T15-125
4T15-140
4T15-156
4T15-188
4T15-218
4T15-250
4T15-312
4T15-375
W
Across
Flats
Cap
Screw
Size
Set
Screw
Size
.028
.035
.050
1/16
5/64
3/32
7/64
1/8
9/64
5/32
3/16
7/32
1/4
5/16
3/8
#0
#1
#2 & #3
#4 & #5
#6
#8
#10
1/4
5/16
3/8
1/2
#0
#1 & #2
#3 & #4
#5 & #6
#8
#10
1/4
5/16
3/8
7/16
1/2
5/8
3/4
10
11
12
13
14
15
10-21
16
I
R
T
NYLON SOCKET HEAD CAP SCREWS

LIGHTWEIGHT
NONCORROSIVE
VIBRATION-RESISTANT
NONCONDUCTIVE
ANTIMAGNETIC
Inch
MATERIAL:
Nylon (Zytel 101)
SPECIFICATION:
2
3
4
5
6
7
8
9
10
11
12
INCH COMPONENT
Catalog Number
Thread
Size
L
Length
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
*A
A
*A
*A
A
#4-40
#4-40
#4-40
#4-40
#6-32
#6-32
#6-32
#6-32
#6-32
#8-32
#8-32
#8-32
#8-32
#8-32
#10-32
#10-32
#10-32
#10-32
#10-32
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
5/16-18
3/8-16
1/2-13
1/2-13
3/8
1/2
3/4
1
1/4
3/8
1/2
3/4
1
1/4
3/8
1/2
3/4
1
1/4
3/8
1/2
3/4
1
3/8
5/8
1
1-1/4
1-1/2
2
1
1
1-1/2
2
9M52-044006
9M52-044008
9M52-044012
9M52-044016
9M52-063204
9M52-063206
9M52-063208
9M52-063212
9M52-063216
9M52-083204
9M52-083206
9M52-083208
9M52-083212
9M52-083216
9M52-103204
9M52-103206
9M52-103208
9M52-103212
9M52-103216
9M52-252006
9M52-252010
9M52-252016
9M52-252020
9M52-252024
9M52-252032
9M52-311816
9M52-371616
9M52-501324
9M52-501332
* Not fully threaded.
13
14
15
16
10-22
NYLON HEXAGONAL HEAD CAP SCREWS

LIGHTWEIGHT
NONCORROSIVE
VIBRATION-RESISTANT
NONCONDUCTIVE
ANTIMAGNETIC
R
Inch
MATERIAL:
Nylon (Zytel 101)
1
L*
2
3
INCH COMPONENT
Catalog Number
Thread
Size
L
Length
*A
*A
*A
A
A
A
A
A
A
A
*A
A
A
A
A
A
*A
*A
A
A
A
A
A
A
A
A
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
5/16-18
5/16-18
5/16-18
5/16-18
5/16-18
5/16-18
3/8-16
3/8-16
3/8-16
3/8-16
3/8-16
3/8-16
3/8-16
3/8-16
3/8-16
3/8-16
1/2
5/8
3/4
1
1-1/4
1-1/2
2
2-1/2
3
5
3/4
1
1-1/4
1-1/2
2
2-1/2
1/2
3/4
1
1-1/4
1-1/2
2
2-1/2
3
3-1/2
4
9P54-252008
9P54-252010
9P54-252012
9P54-252016
9P54-252020
9P54-252024
9P54-252032
9P54-252040
9P54-252048
9P54-252080
9P54-311812
9P54-311816
9P54-311820
9P54-311824
9P54-311832
9P54-311840
9P54-371608
9P54-371612
9P54-371616
9P54-371620
9P54-371624
9P54-371632
9P54-371640
9P54-371648
9P54-371656
9P54-371664
4
Catalog Number
A
A
A
A
*A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
9P54-371672
9P54-371680
9P54-371688
9P54-371696
9P54-501312
9P54-501316
9P54-501320
9P54-501324
9P54-501332
9P54-501340
9P54-501348
9P54-501356
9P54-501364
9P54-501372
9P54-501380
9P54-501388
9P54-501396
9P54-621132
9P54-621140
9P54-621148
9P54-621156
9P54-621164
9P54-621172
9P54-621180
9P54-621188
9P54-621196
Thread
Size
L
Length
3/8-16
3/8-16
3/8-16
3/8-16
1/2-13
1/2-13
1/2-13
1/2-13
1/2-13
1/2-13
1/2-13
1/2-13
1/2-13
1/2-13
1/2-13
1/2-13
1/2-13
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
4-1/2
5
5-1/2
6
3/4
1
1-1/4
1-1/2
2
2-1/2
3
3-1/2
4
4-1/2
5
5-1/2
6
2
2-1/2
3
3-1/2
4
4-1/2
5
5-1/2
6
5
6
7
8
9
10
11
12
* These screws are fully threaded.
13
14
15
10-23
16
I
R
T
PVC HEXAGONAL HEAD CAP SCREWS

LIGHTWEIGHT
NONCORROSIVE
VIBRATION-RESISTANT
NONCONDUCTIVE
ANTIMAGNETIC
Inch
MATERIAL:
Polyvinyl Chloride (PVC)
1
2
3
4
5
6
7
INCH COMPONENT
Catalog Number
A
A
A
A
A
A
9P55-252016
9P55-252032
9P55-252040
9P55-252048
9P55-371616
9P55-371624
8
9
10
11
12
13
14
15
16
10-24
Thread
Size
L
Length
1/4-20
1/4-20
1/4-20
1/4-20
3/8-16
3/8-16
1
2
2-1/2
3
1
1-1/2
HEXAGONAL NYLON INSERT LOCKNUTS

VIBRATION-RESISTANT
NO MARRING OF THREADS
REUSABLE
INSERT EFFECTIVE UP TO 250F
R
Inch
MATERIAL:
Locknut - 303 Stainless Steel

Insert - Nylon
T
1
SPECIFICATION:

B
THREAD
SIZE
3
4
INCH COMPONENT
Catalog Number
A
A
A
A
A
A
9X23-0256
9X23-0440
9X23-0632
9X23-0832
9X23-1032
9X23-2520
Thread
Size
#2-56
#4-40
#6-32
#8-32
#10-32
1/4-20
.250
.250
.313
.344
.375
.438
.140
.140
.172
.234
.234
.313
5
6
7
8
9
10
11
12
13
14
15
10-25
16
I
R
T
PLASTIC HEXAGONAL NUTS

LIGHTWEIGHT
NONCORROSIVE
VIBRATION-RESISTANT
NONCONDUCTIVE
ANTIMAGNETIC
Inch
MATERIAL:
Nylon (6/6 Natural)
SPECIFICATION:
2
3
4
5
6
7
INCH COMPONENT
Catalog Number
A
A
A
A
A
A
A
A
A
A
A
9M62-0256
9M62-0440
9M62-0632
9M62-0832
9M62-1024
9M62-1032
9M62-2520
9M62-3118
9M62-3716
9M62-5013
9M62-6211
8
9
10
11
12
13
14
15
16
10-26
Thread
Size
#2-56
#4-40
#6-32
#8-32
#10-24
#10-32
1/4-20
5/16-18
3/8-16
1/2-13
5/8-11
3/16
1/4
5/16
11/32
3/8
3/8
7/16
1/2
9/16
3/4
15/16
1/16
3/32
1/8
1/8
9/64
9/64
13/64
17/64
21/64
7/16
35/64
NYLON HEXAGONAL LOCK & CAP NUTS

NYLON HEX LOCK NUTS
SELF-THREADING
LOCKING
INSULATING
Inch
MATERIAL:
Nylon (Zytel 101)
SPECIFICATION:
2
3
INCH COMPONENT
Catalog Number
Self-Threading
A 9M64-0256
A 9M64-0440
A 9M64-0632
A 9M64-0832
A 9M64-1024
A 9M64-1032
A 9M64-2520
Threaded
A 9M64-2520T
Thread
Size
.010
.010
#2-56
#4-40
#6-32
#8-32
#10-24
#10-32
1/4-20
.180
.250
.305
.335
.365
.365
.425
.140
.200
.200
.230
.250
.250
.275
1/4-20
.425
.275
NYLON HEX CAP NUTS

LIGHTWEIGHT
NONCORROSIVE
NONCONDUCTIVE
VIBRATION-RESISTANT
9
A
10
MATERIAL:
Nylon (Zytel 101)
SPECIFICATION:
11
12
INCH COMPONENT
Catalog Number
A
A
A
A
A
A
9M65-0440
9M65-0632
9M65-0832
9M65-1024
9M65-1032
9M65-2520
Thread
Size
.010
Ref.
#4-40
#6-32
#8-32
#10-24
#10-32
1/4-20
.250
.305
.330
.365
.365
.425
.280
.345
.375
.400
.400
.475
10-27
13
14
15
16
SOCKET HEAD SET SCREWS

CUP POINT
MATERIAL:
Stainless Steel
Inch
SPECIFICATION:
T
1
2
3
INCH COMPONENT
Catalog Number
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
9X17-008002
9X17-008003
9X17-008004
9X17-008006
9X17-008008
9X17-025602
9X17-025603
9X17-025604
9X17-025606
9X17-025608
9X17-044004
9X17-044006
9X17-044008
9X17-063204
9X17-063206
9X17-063208
9X17-063210
9X17-063212
9X17-064004
9X17-064006
9X17-064008
9X17-064010
9X17-083204
9X17-083206
Thread
Size
L
Length
#0-80
#0-80
#0-80
#0-80
#0-80
#2-56
#2-56
#2-56
#2-56
#2-56
#4-40
#4-40
#4-40
#6-32
#6-32
#6-32
#6-32
#6-32
#6-40
#6-40
#6-40
#6-40
#8-32
#8-32
1/16
3/32
1/8
3/16
1/4
1/16
3/32
1/8
3/16
1/4
1/8
3/16
1/4
1/8
3/16
1/4
5/16
3/8
1/8
3/16
1/4
5/16
1/8
3/16
Catalog Number
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
9X17-083208
9X17-083210
9X17-083212
9X17-083216
9X17-102404
9X17-102406
9X17-102408
9X17-102414
9X17-102416
9X17-103204
9X17-103206
9X17-103208
9X17-103210
9X17-103212
9X17-103216
9X17-103220
9X17-103224
9X17-252006
9X17-252008
9X17-252010
9X17-252012
9X17-252016
9X17-252020
9X17-252024
9X17-311824
9X17-311828
Thread
Size
L
Length
#8-32
#8-32
#8-32
#8-32
#10-24
#10-24
#10-24
#10-24
#10-24
#10-32
#10-32
#10-32
#10-32
#10-32
#10-32
#10-32
#10-32
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
5/16-18
5/16-18
1/4
5/16
3/8
1/2
1/8
3/16
1/4
7/16
1/2
1/8
3/16
1/4
5/16
3/8
1/2
5/8
3/4
3/16
1/4
5/16
3/8
1/2
5/8
3/4
3/4
7/8
4
5
6
7
8
9
10
11
12
13
14
15
10-28
REV: 8.23.12 mh
16
SOCKET HEAD SET SCREWS

CUP POINT
MATERIAL:
Steel, Black Oxide
Inch
SPECIFICATION:
T
1
2
3
INCH COMPONENT
Catalog Number
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
9Q17-008002
9Q17-008003
9Q17-008004
9Q17-008006
9Q17-008008
9Q17-025602
9Q17-025603
9Q17-025604
9Q17-025606
9Q17-025608
9Q17-044003
9Q17-044004
9Q17-044006
9Q17-044008
9Q17-044010
9Q17-063204
9Q17-063206
9Q17-063208
9Q17-063210
9Q17-063212
9Q17-064004
9Q17-064006
9Q17-064008
9Q17-064010
9Q17-083204
9Q17-083206
9Q17-083208
9Q17-083210
9Q17-083212
Thread
Size
L
Length
#0-80
#0-80
#0-80
#0-80
#0-80
#2-56
#2-56
#2-56
#2-56
#2-56
#4-40
#4-40
#4-40
#4-40
#4-40
#6-32
#6-32
#6-32
#6-32
#6-32
#6-40
#6-40
#6-40
#6-40
#8-32
#8-32
#8-32
#8-32
#8-32
1/16
3/32
1/8
3/16
1/4
1/16
3/32
1/8
3/16
1/4
3/32
1/8
3/16
1/4
5/16
1/8
3/16
1/4
5/16
3/8
1/8
3/16
1/4
5/16
1/8
3/16
1/4
5/16
3/8
Catalog Number
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
9Q17-083216
9Q17-102404
9Q17-102406
9Q17-102408
9Q17-102410
9Q17-102412
9Q17-102414
9Q17-102416
9Q17-103204
9Q17-103206
9Q17-103208
9Q17-103210
9Q17-103212
9Q17-103216
9Q17-103220
9Q17-103224
9Q17-252006
9Q17-252008
9Q17-252010
9Q17-252012
9Q17-252016
9Q17-252020
9Q17-252024
9Q17-311810
9Q17-311812
9Q17-311816
9Q17-311824
9Q17-311828
Thread
Size
L
Length
#8-32
#10-24
#10-24
#10-24
#10-24
#10-24
#10-24
#10-24
#10-32
#10-32
#10-32
#10-32
#10-32
#10-32
#10-32
#10-32
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
5/16-18
5/16-18
5/16-18
5/16-18
5/16-18
1/2
1/8
3/16
1/4
5/16
3/8
7/16
1/2
1/8
3/16
1/4
5/16
3/8
1/2
5/8
3/4
3/16
1/4
5/16
3/8
1/2
5/8
3/4
5/16
3/8
1/2
3/4
7/8
4
5
6
7
8
9
10
11
12
13
14
15
10-29
16
HALF-DOG POINT SOCKET HEAD SET SCREWS

MATERIAL:
Alloy Steel, Case-Hardened to Rc 46-53
SPECIFICATION:
Inch
1
2
HEX SOCKET
A
C
L 1/64
4
5
6
7
8
9
10
11
12
13
14
INCH COMPONENT
Thread
Size
Min.
Max.
A
Nominal
L
Length
S705ZY-D0832H03
S705ZY-D0832H04
S705ZY-D0832H05
S705ZY-D0832H06
S705ZY-D0832H08
S705ZY-D1024H03
S705ZY-D1024H04
S705ZY-D1024H05
S705ZY-D1024H06
S705ZY-D1024H08
S705ZY-D2520H04
S705ZY-D2520H05
S705ZY-D2520H06
S705ZY-D2520H08
S705ZY-D2520H10
S705ZY-D2520H12
S705ZY-D2520H16
#8-32
#8-32
#8-32
#8-32
#8-32
#10-24
#10-24
#10-24
#10-24
#10-24
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
.103
.103
.103
.103
.103
.120
.120
.120
.120
.120
.149
.149
.149
.149
.149
.149
.149
.109
.109
.109
.109
.109
.127
.127
.127
.127
.127
.156
.156
.156
.156
.156
.156
.156
.040
.040
.040
.040
.040
.045
.045
.045
.045
.045
.063
.063
.063
.063
.063
.063
.063
3/16
1/4
5/16
3/8
1/2
3/16
1/4
5/16
3/8
1/2
1/4
5/16
3/8
1/2
5/8
3/4
1
15
16
C Dia.
Catalog Number
10-30
NYLON TIPPED SET SCREWS

SELF-LOCKING
NONMARRING
R
Inch
MATERIAL:
Screw - 18-8 Stainless Steel

Tip - Nylon

components, call on our application engineers.
T
1
2
L
P
P
D
SLOTTED HEAD STYLE
SOCKET HEAD STYLE
4
5
6
COMPRESSES INTO THREADS

BECOMING SELF-LOCKING
CONFORMS TO SHAFT
WITHOUT MARRING
INCH COMPONENT
Catalog Number
Slotted Head Style
A 9X93-SL025610
A 9X93-SL044010
A 9X93-SL063210
A 9X93-SL083215
A 9X93-SL102415
A 9X93-SL103215
A 9X93-SL252020
Socket Head Style
A 9X93-SO025610
A 9X93-SO044010
A 9X93-SO063210
A 9X93-SO063218
A 9X93-SO083215
A 9X93-SO083227
A 9X93-SO102415
A 9X93-SO102427
A 9X93-SO103215
A 9X93-SO103227
A 9X93-SO252020
A 9X93-SO252028
T
Thread
Size
D
Dia.
#2-56
#4-40
#6-32
#8-32
#10-24
#10-32
1/4-20
5/32
5/32
5/32
15/64
15/64
15/64
5/16
1/32
1/32
1/32
3/64
3/64
3/64
1/16
1/32
1/16
1/16
3/32
3/32
3/32
1/8
10
#2-56
#4-40
#6-32
#6-32
#8-32
#8-32
#10-24
#10-24
#10-32
#10-32
1/4-20
1/4-20
5/32
5/32
5/32
9/32
15/64
27/64
15/64
27/64
15/64
27/64
5/16
7/16
1/32
1/32
1/32
1/32
3/64
3/64
3/64
3/64
3/64
3/64
1/16
1/16
1/32
1/16
1/16
1/16
3/32
3/32
3/32
3/32
3/32
3/32
1/8
1/8
12
10-31
16
11
13
14
15
SLOTTED HEAD SET SCREWS

FLAT POINT
MATERIAL:
Nylon
Inch
SPECIFICATION:
1
2
3
4
5
6
7
8
9
10
NEW
INCH COMPONENT
Catalog Number
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
9M58-25603
9M58-25604
9M58-25606
9M58-25608
9M58-44002A
9M58-44003A
9M58-44004
9M58-44005
9M58-44006
9M58-44008
9M58-44010
9M58-44012
9M58-44016
9M58-63204
9M58-63205
9M58-63206
9M58-63208
9M58-63210
9M58-63212
9M58-63216
9M58-83204
11
12
13
14
15
16
10-32
Thread
Size
#2-56
#2-56
#2-56
#2-56
#4-40
#4-40
#4-40
#4-40
#4-40
#4-40
#4-40
#4-40
#4-40
#6-32
#6-32
#6-32
#6-32
#6-32
#6-32
#6-32
#8-32
.1875
.2500
.3750
.5000
.1250
.1875
.2500
.3125
.3750
.5000
.6250
.7500
1.0000
.2500
.3125
.3750
.5000
.6250
.7500
1.0000
.2500
Catalog Number
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
9M58-83205
9M58-83206
9M58-83208
9M58-83210
9M58-83212
9M58-83216
9M58-03204
9M58-03205
9M58-03206
9M58-03208
9M58-03210
9M58-03212
9M58-03216
9M58-12004
9M58-12006
9M58-12008
9M58-12010
9M58-12012
9M58-12016
9M58-12016A
Thread
Size
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#10-32
#10-32
#10-32
#10-32
#10-32
#10-32
#10-32
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
.3125
.3750
.5000
.6250
.7500
1.0000
.2500
.3125
.3750
.5000
.6250
.7500
1.0000
.2500
.3750
.5000
.6250
.7500
1.0000
1.0000
ASSEMBLED THUMB SCREW KNOBS

DECORATIVE COLORS
VARIED LENGTHS
R
Inch
MATERIAL:
Knob - Acetal Resin

Screw - Steel Alloy
KNOB COLOR CODE:

B
G
R
Y
Black
Gray
Red
Yellow
1
2
Using the data above, insert the desired Knob Color Code in the
box in the catalog number. For example: A 9T41-R8399108 is a
Red Knurled Head Knob 3/8" Dia. with a #6-32 Screw 3/4" long.
SPECIFICATION:

Fig. 1
INCH COMPONENT
Catalog Number
Fig. 1 Knurled Knobs
A 9T41- 8399101
A 9T41- 8399102
A 9T41- 8399103
A 9T41- 8399106
A 9T41- 8399107
A 9T41- 8399108
A 9T41- 8399111
A 9T41- 8399112
A 9T41- 8399113
A 9T41- 8399114
A 9T41- 8399116
A 9T41- 8399117
A 9T41- 8399118
A 9T41- 8399119
A 9T41- 8399121
A 9T41- 8399122
A 9T41- 8399123
A 9T41- 8399124
A 9T41- 8399126
A 9T41- 8399127
A 9T41- 8399128
A 9T41- 8399129
A 9T41- 8399131
A 9T41- 8399132
A 9T41- 8399133
A 9T41- 8399134
Fig. 2 Rosette Knobs
A 9T41- 8399151
A 9T41- 8399152
A 9T41- 8399153
A 9T41- 8399154
A 9T41- 8399156
A 9T41- 8399157
A 9T41- 8399158
A 9T41- 8399159
A 9T41- 8399161
A 9T41- 8399162
A 9T41- 8399164
Fig. 2
Screw
Size
A
Head
Dia.
Screw
Length
#4-40
#4-40
#4-40
#6-32
#6-32
#6-32
#8-32
#8-32
#8-32
#8-32
#10-32
#10-32
#10-32
#10-32
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
5/16-18
5/16-18
5/16-18
5/16-18
5/16
5/16
5/16
3/8
3/8
3/8
1/2
1/2
1/2
1/2
5/8
5/8
5/8
5/8
3/4
3/4
3/4
3/4
1
1
1
1
1
1
1
1
1/4
1/2
3/4
1/4
1/2
3/4
3/8
1/2
3/4
1
3/8
1/2
3/4
1
1/2
3/4
1
1-1/2
1/2
3/4
1
1-1/2
1/2
3/4
1
1-1/2
1/4-20
1/4-20
1/4-20
1/4-20
5/16-18
5/16-18
5/16-18
5/16-18
3/8-16
3/8-16
3/8-16
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1/2
3/4
1
1-1/2
1/2
3/4
1
1-1/2
3/4
1
1-1/2
4
5
6
7
8
9
10
11
12
13
14
15
10-33
16
I
R
ASSEMBLED THUMB SCREW KNOBS

DECORATIVE COLORS
VARIED LENGTHS
Inch
MATERIAL:
Knob - Acetal Resin

Screw - Steel Alloy
KNOB COLOR CODE:
1
2
3
B
G
R
Y
Black
Gray
Red
Yellow
Using the data above, insert the desired Knob

Color Code in the box in the catalog number.
For example: A 9T41-R8399171 is a Red Tee
Knob 1" in length with a #10-32 Screw 3/8" long.
4
5
Fig. 1
7
8
9
10
11
12
13
Fig. 2
INCH COMPONENT
Catalog Number
Fig. 1 Tee Knobs

A 9T41- 8399171
A 9T41- 8399172
A 9T41- 8399173
A 9T41- 8399174
A 9T41- 8399176
A 9T41- 8399177
A 9T41- 8399178
A 9T41- 8399179
A 9T41- 8399181
A 9T41- 8399182
A 9T41- 8399183
A 9T41- 8399184
A 9T41- 8399186
A 9T41- 8399187
A 9T41- 8399188
Fig. 2 "L" Knobs
A 9T41- 8399190
A 9T41- 8399191
A 9T41- 8399192
A 9T41- 8399193
A 9T41- 8399195
A 9T41- 8399196
A 9T41- 8399197
A 9T41- 8399198
A 9T41- 8399200
A 9T41- 8399201
A 9T41- 8399202
A 9T41- 8399203
Screw
Size
Screw
Length
#10-32
#10-32
#10-32
#10-32
1/4-20
1/4-20
1/4-20
1/4-20
5/16-18
5/16-18
5/16-18
5/16-18
3/8-16
3/8-16
3/8-16
1
1
1
1
1-1/4
1-1/4
1-1/4
1-1/4
1-1/2
1-1/2
1-1/2
1-1/2
1-3/4
1-3/4
1-3/4
3/8
1/2
3/4
1
1/2
3/4
1
1-1/2
1/2
3/4
1
1-1/2
3/4
1
1-1/2
#10-32
#10-32
#10-32
#10-32
1/4-20
1/4-20
1/4-20
1/4-20
5/16-18
5/16-18
5/16-18
5/16-18
9/16
9/16
9/16
9/16
11/16
11/16
11/16
11/16
27/32
27/32
27/32
27/32
3/8
1/2
3/4
1
1/2
3/4
1
1-1/2
1/2
3/4
1
1-1/2
14
15
16
10-34
THUMB SCREW KNOBS

DECORATIVE COLORS
USED ON SOCKET HEAD SCREWS
R
Inch
MATERIAL:
Acetal Resin
KNOB COLOR CODE:

B
G
R
Y
Black
Gray
Red
Yellow
1
2
Using the data above, insert the desired

Knob Color Code in the box in the catalog
number. For example: A 9T41R8399108 is a
Red Knurled Head Knob 5/8" Dia. for a
#10 Screw.
SPECIFICATION:

Fig. 1
Fig. 2
4
5
Method of Assembly to
AMethod
9Q26 Series
Cap Screws
of Assembly
1. Preassemble into ribbed retaining socket.

2. Simply press screw to shear and lock.
1.
2.
A
8
INCH COMPONENT
Catalog Number
Fig. 1 Knurled Knobs
A 9M41- 8398899
A 9M41- 8398900
A 9M41- 8398901
A 9M41- 8398902
A 9M41- 8398903
A 9M41- 8398904
A 9M41- 8398906
Fig. 2 Rosette Knobs
A 9M41- 8398907
A 9M41- 8398908
A 9M41- 8398909
Fig. 3 Tee Knobs
A 9M41- 8398923
A 9M41- 8398924
A 9M41- 8398925
A 9M41- 8398926
Fig. 4 "L" Knobs
A 9M41- 8398950
A 9M41- 8398951
A 9M41- 8398952
Fig. 3
Fig. 4
Fits
Screw
C
Dia.
#4
#6
#8
#10
1/4
1/4
5/16
5/16
3/8
1/2
5/8
3/4
1
1
11/64
3/16
7/32
1/4
5/16
5/16
13/32
9/32
21/64
3/8
27/64
1/2
1/2
19/32
1/4
5/16
3/8
1-1/2
1-1/2
1-1/2
15/32
13/32
15/32
17/32
37/64
45/64
#10
1/4
5/16
3/8
1
1-1/4
1-1/2
1-3/4
1/4
5/16
13/32
15/32
7/16
33/64
5/8
23/32
14
#10
1/4
5/16
9/16
11/16
27/32
11/32
7/16
17/32
29/64
33/64
41/64
15
10-35
10
11
12
13
16
ASSORTED KNOB KITS

DECORATIVE COLORS
R
T
SPECIFICATION:
Simple two-step assembly to standard

socket head cap screws.
Inch
1
2
3
4
5
Method of Assembly
6
7
8
9
10
11
12
1.
INCH COMPONENT
Catalog Number
Description
A 9M41-KIT001
686-piece Knurled Knob kit - 48 black, 30 red and 20 gray of each size: #4, #6, #8,
#10, 1/4 (3/4 +1 in. Dia.) and 5/16 (1 in. Dia.) in plastic case.
A 9M41-KIT002
350-piece Knurled Knob kit - 25 black, 15 red and 10 gray as above in plastic case.
A 9M41-KIT003
150-piece Rosette Knob kit - 25 black and 25 gray of each size: 1/4, 5/16 and 3/8 in
plastic case.
A 9M41-KIT004
A 9M41-KIT004
13
14
15
16
2.
10-36
300-piece Tee Knob kit - 25 black, 25 red and 25 gray of each size: #10, 1/4, 5/16
and 3/8 in plastic case.
KNURLED THUMB SCREWS

MATERIAL:
Brass
FINISH:
Inch
Nickel Plated or Black Oxide
T
1
1/32 R.
3/16
DIAMOND KNURL
O.D.
3
4
1/64
TYP
D
INCH COMPONENT
Catalog Number
Brass, Nickel Plated
A 9B41-A0632A
A 9B41-A0632B
A 9B41-A0632C
A 9B41-A0632D
A 9B41-A0632E
A 9B41-A0632F
A 9B41-A0832A
A 9B41-A0832B
A 9B41-A0832C
A 9B41-A0832D
A 9B41-A0832E
A 9B41-A1032A
A 9B41-A1032B
A 9B41-A1032C
Brass, Black Oxide
A 9B41-A0632ABL
A 9B41-A0632XBL
A 9B41-A0632BBL
A 9B41-A0632CBL
A 9B41-A0632YBL
A 9B41-A0632DBL
A 9B41-A0832ABL
A 9B41-A0832BBL
A 9B41-A0832CBL
A 9B41-A0832DBL
Thread
Size
O.D.
F
Dia.
#6-32
#6-32
#6-32
#6-32
#6-32
#6-32
#8-32
#8-32
#8-32
#8-32
#8-32
#10-32
#10-32
#10-32
13/32
13/32
13/32
1/2
1/2
1/2
13/32
13/32
13/32
1/2
1/2
13/32
13/32
13/32
3/8
7/16
1/2
1/2
3/8
7/16
3/8
7/16
1/2
7/16
3/8
3/8
7/16
1/2
23/32
23/32
23/32
13/16
13/16
13/16
23/32
23/32
23/32
13/16
13/16
23/32
23/32
23/32
5/16
3/8
7/16
7/16
5/16
3/8
5/16
3/8
7/16
3/8
5/16
5/16
3/8
7/16
#6-32
#6-32
#6-32
#6-32
#6-32
#6-32
#8-32
#8-32
#8-32
#8-32
13/32
13/32
13/32
1/2
1/2
1/2
13/32
1/2
13/32
13/32
3/8
7/16
1/2
3/8
7/16
1/2
1/2
7/16
3/8
7/16
23/32
23/32
23/32
13/16
13/16
13/16
23/32
13/16
23/32
23/32
5/16
3/8
7/16
5/16
3/8
7/16
7/16
3/8
5/16
3/8
6
7
8
9
10
11
12
13
14
15
10-37
16
NYLON KNURLED HEAD THUMB SCREWS
LIGHTWEIGHT
NONCORROSIVE
NONCONDUCTIVE
VIBRATION-RESISTANT
MATERIAL:
Inch
Nylon
SPECIFICATION:
O.D.
4
5
INCH COMPONENT
Catalog Number
6
7
8
9
10
11
12
13
14
15
16
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
9P57-044004
9P57-044006
9P57-044008
9P57-044012
9P57-063204
9P57-063206
9P57-063208
9P57-063212
9P57-063216
9P57-083206
9P57-083208
9P57-083212
9P57-083216
9P57-102408
9P57-102412
9P57-102416
9P57-103208
9P57-103212
9P57-103216
9P57-252008
9P57-252012
9P57-252016
9P57-311808
9P57-311816
9P57-311824
9P57-311832
9P57-371608
9P57-371616
9P57-371624
9P57-371632
9P57-501316
9P57-501324
9P57-501332
Thread
Size
L
Length
O.D.
#4-40
#4-40
#4-40
#4-40
#6-32
#6-32
#6-32
#6-32
#6-32
#8-32
#8-32
#8-32
#8-32
#10-24
#10-24
#10-24
#10-32
#10-32
#10-32
1/4-20
1/4-20
1/4-20
* 5/16-18
* 5/16-18
* 5/16-18
* 5/16-18
* 3/8-16
* 3/8-16
* 3/8-16
* 3/8-16
* 1/2-13
* 1/2-13
* 1/2-13
1/4
3/8
1/2
3/4
1/4
3/8
1/2
3/4
1
3/8
1/2
3/4
1
1/2
3/4
1
1/2
3/4
1
1/2
3/4
1
1/2
1
1-1/2
2
1/2
1
1-1/2
2
1
1-1/2
2
5/16
5/16
5/16
5/16
3/8
3/8
3/8
3/8
3/8
27/64
27/64
27/64
27/64
7/16
7/16
7/16
7/16
7/16
7/16
35/64
35/64
35/64
5/8
5/8
5/8
5/8
11/16
11/16
11/16
11/16
3/4
3/4
3/4
9/32
9/32
9/32
9/32
9/32
9/32
9/32
9/32
9/32
5/16
5/16
5/16
5/16
21/64
21/64
21/64
21/64
21/64
21/64
3/8
3/8
3/8
13/32
13/32
13/32
13/32
7/16
7/16
7/16
7/16
15/32
15/32
15/32
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
9/64
9/64
9/64
9/64
9/64
9/64
9/64
9/64
9/64
9/64
5/32
5/32
5/32
11/64
11/64
11/64
11/64
3/16
3/16
3/16
3/16
13/64
13/64
13/64
* These are not standard thread sizes; considerable price premium paid due to low production quantities.
10-38
CAPTIVE THUMB SCREWS

MATERIAL:
Half-Hard Brass
FINISH:
Inch
Nickel Plated or Black Oxide
T
1
C
F
J
.040
H
MEDIUM STRAIGHT KNURL
O.D.
INCH COMPONENT
Catalog Number
5
Thread
Size
Half-Hard Brass, Nickel Plated

#6-32
A 9B41-B0632
#8-32
A 9B41-B0832
#8-32
A 9B41-B0832A
#10-32
A 9B41-B1032
1/4-20
A 9B41-B2520A
1/4-20
A 9B41-B2520B
1/4-20
A 9B41-B2520C
1/4-20
A 9B41-B2520D
Half-Hard Brass, Black Oxide
#6-32
A 9B41-B0632BL
#8-32
A 9B41-B0832BL
#10-32
A 9B41-B1032BL
O.D.
H
Dia.
J
Dia.
3/4
3/4
7/8
7/8
7/8
1-1/8
1
1
1/8
3/16
3/16
3/16
3/16
1/4
3/16
1/4
1/16
1/16
1/16
1/16
1/16
1/8
1/16
1/8
5/16
5/8
5/8
5/8
5/8
3/4
5/8
3/4
3/16
1/4
1/4
1/4
1/4
3/8
1/4
3/8
5/16
3/8
3/8
3/8
3/8
5/8
3/8
5/8
.20
1/2
1/2
1/2
1/2
1/2
1/2
1/2
.093
.125
.125
.125
.187
.187
.187
.187
3/4
3/4
7/8
1/8
3/16
3/16
1/16
1/16
1/16
5/16
5/8
5/8
3/16
1/4
1/4
5/16
3/8
3/8
.20
1/2
1/2
.093
.125
.125
6
7
8
9
10
11
12
13
14
15
10-39
16
PRECISION KNURLED KNOBS

MATERIAL:
303 Stainless Steel
Special knobs are available on request.
Inch
1
Precision
Component
1
2
3
4
FOR CLAMPS,
SEE INDEX
B A
.250
9
10
11
+.0005
I.D. -.0000
O.D.
1/8
3/16
Clamp Type
D
Pin Type
INCH COMPONENT
Catalog Number
Clamp Type
Pin Type
S5901Y-KN-01
S5901Y-KN-02
S5901Y-KN-03
S5901Y-KN-04
S5901Y-KN-05
S5901Y-KN-06
S5901Y-KN-07
S5901Y-KN-08
S5901Y-KN-09
S5901Y-KN-10
S5901Y-KN-11
S5901Y-KN-12
S5901Y-KN-13
S5901Y-KN-14
S5901Y-KN-15
S5901Y-KN-16
S5901Y-KN-17
S5901Y-KN-18
12
13
14
15
16
SUB DRILL
SET SCREW
7
8
MEDIUM
STRAIGHT KNURL
10-40
I.D.
O.D.
A
Dia.
B
Dia.
C
Dia.
Sub
Drill
Set
Screw
.1248
.1248
.1248
.1873
.1873
.1873
.2498
.2498
.2498
1.000
1.500
2.000
1.000
1.500
2.000
1.000
1.500
2.000
.188
.188
.188
.250
.250
.250
.312
.312
.312
1/4
1/4
1/4
5/16
5/16
5/16
3/8
3/8
3/8
.312
.312
.312
.375
.375
.375
.500
.500
.500
3/16
3/16
3/16
7/32
7/32
7/32
1/4
1/4
1/4
.029
.029
.029
.040
.040
.040
.070
.070
.070
#2-56
#2-56
#2-56
#4-40
#4-40
#4-40
#6-32
#6-32
#6-32
PRECISION HANDCRANKS
2 INCH DIAMETER
MATERIAL:
2024 Aluminum, Black Anodized
Inch

Name plates can be ordered separately.
T
1
KNURL
2
3
KNURL
#4-40, 3/16
DEEP, 2 PL
1/4
SUB DRILL
SET SCREW
O.D. I.D.
3/4
4
5
NAME PLATE
1/8
1/4
1-1/4
INCH COMPONENT
Catalog Number
I.D.
+.0005
-.0000
Hub
O.D.
Set
Screw
Sub
Drill
S5901Y-GU-1
S5901Y-GU-2
S5901Y-GU-3
.1248
.1873
.2498
.312
.375
.500
#2-56
#4-40
#6-32
.029
.040
.086
9
10
11
12
13
14
15
10-41
16
HANDLES
OVAL HANDLES
R
T
MATERIAL:
Inch
Aluminum, Black Anodized or

1/2 RAD.
d
L
9/32
5/8
INCH COMPONENT
4
5
6
7
8
Catalog Number
Aluminum, Black Anodized
A 9A45-A30
A 9A45-A46
A 9A45-A64
A 9A45-A90
A 9B45-A30
A 9B45-A46
A 9B45-A64
A 9B45-A90
H
Height
L
Length
T
Thread
d
Thread
Depth
1-9/32
1-1/2
1-3/4
1-3/4
3
4-9/16
6-7/16
9
#10-24
#10-24
#10-24
#10-24
3/8
1/2
5/8
5/8
1-9/32
1-1/2
1-3/4
1-3/4
3
4-9/16
6-7/16
9
#10-32
#10-32
#10-32
#10-32
3/8
1/2
1/2
1/2
CHASSIS HANDLES
FOLDING TYPE
MATERIAL:
10
FINISH:
11
Brass
1-27/32
90
180
1/8 R
3/8 RAD.
Nuts and washers are
supplied, and come in
various materials.
12
13
3/8
Nickel Plated or
Black Oxide
1/8 R
1/2
3/8-24
4.000
4-5/8
INCH COMPONENT
5/8
5/8
5/8
1-27/32
1-13/16
Fig. 2
Fig. 1
14
Catalog Number
Fig. No.
Finish
15
A 9B47-A15N
A 9B47-A15BL
A 9B47-A15N18
1
1
2
Nickel Plated
Black Oxide
Nickel Plated
16
10-42
ROUND HANDLES & END FERRULES

ROUND HANDLES
MATERIAL:
Inch
Brass, Nickel Plated,

Stainless Steel or
5/16 R
1/2
#10-32 THREAD
1/32 x 60 C' SUNK
INCH COMPONENT
Catalog Number
A 9B44-A3010
A 9B44-A4210
A 9B44-A4610
A 9B44-A6510
Stainless Steel
A 9Y44-A30
A 9Y44-A30H
A 9Y44-A42
A 9Y44-A45
A 9Y44-A60
A 9Y44-A65
A 9A44-A30
* A 9A44-A40
A 9A44-A46
H
Height
L
Length
D
Dia.
1-5/16
1-1/2
1-1/2
1-3/4
3
4-1/4
4-9/16
6-1/2
5/16
5/16
5/16
5/16
1-5/16
1-1/2
1-1/2
1-1/2
1-1/2
1-3/4
3
3
4-1/4
4-1/2
6
6-1/2
5/16
5/16
5/16
5/16
5/16
5/16
1-1/2
1-7/8
1-1/2
3
4
4-9/16
5/16
3/8
5/16
4
5
6
7
8
* Catalog number: A 9A44-A40 has an internal radius of 3/8".
END FERRULES
17/64
MATERIAL:
Brass, Nickel Plated,

.196
Aluminum, Black Anodized or DRILL
Stainless Steel
7/32
.325
10
O.D.
#9
DRILL
5/16
3/8
Fig. 1
1/32
.385
15/32
Fig. 2
1/4
5/16-18
THREAD
11
Fig. 3
INCH COMPONENT
12
Material
O.D.
A 9B44-A
A 9A44-A
A 9Y44-A

Stainless Steel
3/4
3/4
3/4
A 9A44-AAA
A 9B44-AAA

3/4
3/4
A 9B44-ATH
5/8
Catalog Number
13
Fig. 1
Fig. 2
Fig. 3
14
15
10-43
16
I
R
T
MOLDED SCREW INSULATORS

NONCONDUCTIVE
NONCORROSIVE
LIGHTWEIGHT
SELF-SEALING
SELF-LOCKING
Inch
MATERIAL:
Nylon (Zytel 101)
SPECIFICATION:
2
3
4
5
6
8
9
10
11
12
13
14
15
16
INCH COMPONENT
Catalog Number
I.D. O.D.
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
9M70-0612
9M70-0618
9M70-0625
9M70-0637
9M70-0803
9M70-0809
9M70-0812
9M70-0818
9M70-0837
9M70-0850
9M70-0912
9M70-0918
9M70-0925
9M70-0937
9M70-0950
9M70-1114
9M70-1125
9M70-1137
9M70-1150
9M70-1162
9M70-1175
9M70-1325
9M70-1337
9M70-1350
9M70-1362
9M70-1375
9M70-1618
9M70-1625
9M70-1637
9M70-1650
9M70-1662
9M70-1675
10-44
Screw
Size
O.D.
I.D.
L
Length
D
Dia.
#2
#2
#2
#2
#4
#4
#4
#4
#4
#4
#6
#6
#6
#6
#6
#8
#8
#8
#8
#8
#8
#10
#10
#10
#10
#10
1/4
1/4
1/4
1/4
1/4
1/4
.120
.120
.120
.120
.145
.145
.145
.145
.145
.145
.170
.170
.170
.170
.170
.205
.205
.205
.205
.205
.205
.260
.260
.260
.260
.260
.312
.312
.312
.312
.312
.312
.090
.090
.090
.090
.115
.115
.115
.115
.115
.115
.140
.140
.140
.140
.140
.173
.173
.173
.173
.173
.173
.200
.200
.200
.200
.200
.260
.260
.260
.260
.260
.260
1/8
3/16
1/4
3/8
1/32
3/32
1/8
3/16
3/8
1/2
1/8
3/16
1/4
3/8
1/2
9/64
1/4
3/8
1/2
5/8
3/4
1/4
3/8
1/2
5/8
3/4
3/16
1/4
3/8
1/2
5/8
3/4
.181
.181
.181
.181
.235
.235
.235
.235
.235
.235
.290
.290
.290
.290
.290
.344
.344
.344
.344
.344
.344
.399
.399
.399
.399
.399
.513
.513
.513
.513
.513
.513
3/64
3/64
3/64
3/64
3/64
3/64
3/64
3/64
3/64
3/64
3/64
3/64
3/64
3/64
3/64
1/16
1/16
1/16
1/16
1/16
1/16
1/16
1/16
1/16
1/16
1/16
1/16
1/16
1/16
1/16
1/16
1/16
SHAFT SPACERS
MATERIAL:

Other spacers available on special order.
Inch
T
1
2
O.D.
I.D.
5
INCH COMPONENT
Catalog Number
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
8-C04004
8-C04006
8-C04008
8-C04010
8-C04012
8-C04014
8-C04016
8-C04031
8-C04063
8-C04094
8-C04125
8-C04188
8-C04250
8-C04375
8-C04500
8-C06004
8-C06006
8-C06008
8-C06010
8-C06012
8-C06014
8-C06016
8-C06031
8-C06063
8-C06094
8-C06125
8-C06188
6
I.D.
T
O.D. Thickness
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
.004
.006
.008
.010
.012
.014
.016
.031
.063
.094
.125
.188
.250
.375
.500
.004
.006
.008
.010
.012
.014
.016
.031
.063
.094
.125
.188
Catalog Number
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
8-C06250
8-C06375
8-C06500
8-C08004
8-C08006
8-C08008
8-C08010
8-C08012
8-C08014
8-C08016
8-C08031
8-C08063
8-C08094
8-C08125
8-C08188
8-C08250
8-C08375
8-C08500
8-C10004
8-C10006
8-C10008
8-C10010
8-C10012
8-C10014
8-C10016
8-C10031
8-C10063
I.D.
T
O.D. Thickness
3/16
3/16
3/16
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
1/4
1/4
1/4
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
7/16
7/16
7/16
7/16
7/16
7/16
7/16
7/16
7/16
.250
.375
.500
.004
.006
.008
.010
.012
.014
.016
.031
.063
.094
.125
.188
.250
.375
.500
.004
.006
.008
.010
.012
.014
.016
.031
.063
7
8
9
10
11
12
13
14
15
10-45
REV: 03.13.12 mh
16
SHAFT SPACERS
MATERIAL:

Inch
1
2
3
O.D.
I.D.
4
5
6
7
8
9
10
11
12
13
INCH COMPONENT
Catalog Number
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
8-C10094
8-C10125
8-C10188
8-C10250
8-C10375
8-C10500
8-C12004
8-C12006
8-C12008
8-C12010
8-C12012
8-C12014
8-C12016
8-C12031
8-C12063
8-C12094
8-C12125
8-C12188
8-C12250
8-C12375
8-C12500
8-C14004
8-C14006
8-C14008
8-C14010
8-C14012
8-C14014
14
15
16
10-46
I.D.
T
O.D. Thickness
5/16
5/16
5/16
5/16
5/16
5/16
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
7/16
7/16
7/16
7/16
7/16
7/16
7/16
7/16
7/16
7/16
7/16
7/16
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
9/16
9/16
9/16
9/16
9/16
9/16
.094
.125
.188
.250
.375
.500
.004
.006
.008
.010
.012
.014
.016
.031
.063
.094
.125
.188
.250
.375
.500
.004
.006
.008
.010
.012
.014
Catalog Number
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
8-C14016
8-C14031
8-C14063
8-C14094
8-C14125
8-C14188
8-C14250
8-C14375
8-C14500
8-C16004
8-C16006
8-C16008
8-C16010
8-C16012
8-C16014
8-C16016
8-C16031
8-C16063
8-C16094
8-C16125
8-C16188
8-C16250
8-C16375
8-C16500
8-C20050
8-C24050
I.D.
T
O.D. Thickness
7/16
7/16
7/16
7/16
7/16
7/16
7/16
7/16
7/16
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
5/8
3/4
9/16
9/16
9/16
9/16
9/16
9/16
9/16
9/16
9/16
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
3/4
7/8
.016
.031
.063
.094
.125
.188
.250
.375
.500
.004
.006
.008
.010
.012
.014
.016
.031
.063
.094
.125
.188
.250
.375
.500
.050
.050
SHIM SPACERS
OUTER RACE SHIM SPACER
MATERIAL:
Inch
SPECIFICATION:
I.D.
O.D.
1
INCH COMPONENT
Catalog Number
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
8-A04003
8-A04005
8-A04007
8-A04010
8-A04020
8-A06003
8-A06005
8-A06007
8-A06010
8-A06020
8-A08003
8-A08005
8-A08007
8-A08010
8-A08020
8-A12003
8-A12005
8-A12007
8-A12010
8-A12020
I.D.
O.D.
Shaft Size
Ref.
+.005
-.000
+.000
-.005
1/8
1/8
1/8
1/8
1/8
3/16
3/16
3/16
3/16
3/16
1/4
1/4
1/4
1/4
1/4
3/8
3/8
3/8
3/8
3/8
.253
.253
.253
.253
.253
.378
.378
.378
.378
.378
.503
.503
.503
.503
.503
.628
.628
.628
.628
.628
.373
.373
.373
.373
.373
.498
.498
.498
.498
.498
.623
.623
.623
.623
.623
.873
.873
.873
.873
.873
T
Thickness
.003
.005
.007
.010
.020
.003
.005
.007
.010
.020
.003
.005
.007
.010
.020
.003
.005
.007
.010
.020
MATERIAL:
6
7
O.D.
10
INCH COMPONENT
8-B04234
8-B06375
8-B08500
8-B09375
8-B10370
8-B10500
8-B11500
8-B12498
8-B12625
8-B14625
8-B16750
8-B22873
9
I.D.
SPECIFICATION:
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
T (.002/LAMINATE)
Laminated Brass
A
A
A
A
A
A
A
A
A
A
A
A
LAMINATED BRASS SHIM SPACERS
Catalog Number
.001
I.D.
O.D.
T
Thickness
.135
.193
.255
.281
.312
.312
.343
.375
.380
.442
.505
.687
.234
.375
.500
.375
.370
.500
.500
.498
.625
.625
.750
.873
.032
.032
.032
.032
.032
.032
.032
.032
.032
.032
.032
.032
10-47
11
12
13
14
15
16
ARBOR SPACERS
MATERIAL:
Strip Steel
SPECIFICATION:
Inch
1
2
T
B
KEYWAY
O.D.
I.D.
5
6
INCH COMPONENT
Catalog Number
7
8
9
10
11
12
13
14
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
7C
7C
7C
7C
7C
7C
7C
7C
7C
7C
7C
7C
7C
7C
7C
7C
7C
7C
7C
7C
7C
7C
7C
7C
7C
7C
7C
7C
7C
8-D12002
8-D12004
8-D12006
8-D12010
8-D12020
8-D12025
8-D12032
8-D12062
8-D12125
8-D16001
8-D16002
8-D16005
8-D16010
8-D16015
8-D16125
8-D20006
8-D20062
8-D24001
8-D24015
8-D24062
8-D28032
8-D32001
8-D32002
8-D32005
8-D32008
8-D32010
8-D32015
8-D32093
8-D32125
15
16
10-48
+.005
-.000
I.D.
+.005
-.000
O.D.
Keyway
+.010
-.000
+.007
-.000
T
Thickness
.376
.376
.376
.376
.376
.376
.376
.376
.376
.501
.501
.501
.501
.501
.501
.626
.626
.751
.751
.751
.876
1.001
1.001
1.001
1.001
1.001
1.001
1.001
1.001
.625
.625
.625
.625
.625
.625
.625
.625
.625
.750
.750
.750
.750
.750
.750
1.000
1.000
1.125
1.125
1.125
1.375
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1/8 x 3/64
1/8 x 3/64
1/8 x 3/64
1/8 x 3/64
1/8 x 3/64
1/8 x 3/64
1/8 x 3/64
1/8 x 3/64
1/8 x 3/64
1/8 x 3/64
1/8 x 3/64
1/8 x 3/64
1/8 x 3/64
1/8 x 3/64
1/8 x 3/64
5/32 x 1/16
5/32 x 1/16
3/16 x 5/64
3/16 x 5/64
3/16 x 5/64
3/16 x 5/64
1/4 x 3/32
1/4 x 3/32
1/4 x 3/32
1/4 x 3/32
1/4 x 3/32
1/4 x 3/32
1/4 x 3/32
1/4 x 3/32
.433
.433
.433
.433
.433
.433
.433
.433
.433
.558
.558
.558
.558
.558
.558
.699
.699
.839
.839
.839
.964
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
.130
.130
.130
.130
.130
.130
.130
.130
.130
.130
.130
.130
.130
.130
.130
.161
.161
.192
.192
.192
.192
.255
.255
.255
.255
.255
.255
.255
.255
.002
.004
.006
.010
.020
.025
.032
.062
.125
.001
.002
.005
.010
.015
.125
.006
.062
.001
.015
.062
.032
.001
.002
.005
.008
.010
.015
.093
.125
ARBOR SHIMS
MATERIAL:
Strip Steel
SPECIFICATION:
Inch
0
O.D.
I.D.
1
INCH COMPONENT
Catalog Number
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
7C
7C
7C
7C
7C
7C
7C
7C
7C
7C
7C
7C
7C
7C
7C
7C
7C
7C
7C
7C
7C
7C
7C
7C
7C
7C
7C
7C
7C
7C
7C
7C
7C
7C
7C
7C
7C
7C
7C
7C
7C
7C
7C
7C
7C
7C
7C
7C
8-E12001
8-E12002
8-E12003
8-E12004
8-E12005
8-E12006
8-E12007
8-E12008
8-E12010
8-E12012
8-E12015
8-E12020
8-E12025
8-E12032
8-E12047
8-E12062
8-E12093
8-E12125
8-E16001
8-E16002
8-E16003
8-E16004
8-E16005
8-E16006
8-E16007
8-E16008
8-E16010
8-E16012
8-E16015
8-E16020
8-E16025
8-E16032
8-E16047
8-E16062
8-E16093
8-E16125
8-E20001
8-E20002
8-E20003
8-E20004
8-E20005
8-E20006
8-E20007
8-E20008
8-E20010
8-E20012
8-E20015
8-E20020
+.005
-.000
I.D.
+.000
-.005 Thickness
O.D.
.376
.376
.376
.376
.376
.376
.376
.376
.376
.376
.376
.376
.376
.376
.376
.376
.376
.376
.501
.501
.501
.501
.501
.501
.501
.501
.501
.501
.501
.501
.501
.501
.501
.501
.501
.501
.626
.626
.626
.626
.626
.626
.626
.626
.626
.626
.626
.626
.625
.625
.625
.625
.625
.625
.625
.625
.625
.625
.625
.625
.625
.625
.625
.625
.625
.625
.750
.750
.750
.750
.750
.750
.750
.750
.750
.750
.750
.750
.750
.750
.750
.750
.750
.750
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.000
.001
.002
.003
.004
.005
.006
.007
.008
.010
.012
.015
.020
.025
.032
.047
.062
.093
.125
.001
.002
.003
.004
.005
.006
.007
.008
.010
.012
.015
.020
.025
.032
.047
.062
.093
.125
.001
.002
.003
.004
.005
.006
.007
.008
.010
.012
.015
.020
Catalog Number
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
*A
A
A
*A
A
A
A
A
A
7C
7C
7C
7C
7C
7C
7C
7C
7C
7C
7C
7C
7C
7C
7C
7C
7C
7C
7C
7C
7C
7C
7C
7C
7C
7C
7C
7C
7C
7C
7C
7C
7C
7C
7C
7C
7C
7C
7C
7C
7C
7C
7C
7C
7C
7C
7C
8-E20032
8-E20047
8-E20062
8-E20093
8-E20125
8-E24401
8-E24002
8-E24003
8-E24004
8-E24005
8-E24006
8-E24015
8-E24020
8-E24025
8-E24032
8-E24047
8-E24062
8-E24093
8-E24125
8-E28001
8-E28002
8-E28003
8-E28004
8-E28006
8-E28007
8-E28010
8-E28015
8-E28020
8-E28025
8-E28032
8-E28062
8-E28093
8-E28125
8-E32001
8-E32002
8-E32003
8-E32004
8-E32005
8-E32007
8-E32010
8-E32015
8-E32020
8-E32032
8-E32047
8-E32062
8-E32093
8-E32125
+.005
-.000
I.D.
+.000
-.005 Thickness
O.D.
.626
.626
.626
.626
.626
.751
.751
.751
.751
.751
.751
.751
.751
.751
.751
.751
.751
.751
.751
.876
.876
.876
.876
.876
.876
.876
.876
.876
.876
.876
.876
.876
.876
1.001
1.001
1.001
1.001
1.001
1.001
1.001
1.001
1.001
1.001
1.001
1.001
1.001
1.001
1.000
1.000
1.000
1.000
1.000
1.125
1.125
1.125
1.125
1.125
1.125
1.125
1.125
1.125
1.125
1.125
1.125
1.125
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
.032
.047
.062
.093
.125
.001
.002
.003
.004
.005
.006
.015
.020
.025
.032
.047
.062
.093
.125
.001
.002
.003
.004
.006
.007
.010
.015
.020
.025
.032
.062
.093
.125
.001
.002
.003
.004
.005
.007
.010
.015
.020
.032
.047
.062
.093
.125
2
3
4
5
6
7
8
9
10
11
12
13
14
15

10-49
16
THREAD AND BOLT SIZE SHIMS

MATERIAL:
Spring Steel
SPECIFICATIONS:
Thread Size Shims

I.D. Tolerance is +.000/-.005
O.D. Tolerance is +.000/-.005
Bolt Size Shims

I.D. Tolerance is +.002/-.000
O.D. Tolerance is +.000/-.002
Inch
THREAD SIZE
SHIMS
SHOULDER
SCREW SIZE
4
5
6
8
9
10
11
12
13
14
15
16
I.D.
O.D.
BOLT SIZE
SHIMS
INCH COMPONENT
Catalog Number
Shoulder
Screw
Size
Thread Size Shims (Lengthening Shims)

1/4
A 7C 8-F05005
1/4
A 7C 8-F05015
5/16
A 7C 8-F06005
5/16
A 7C 8-F06015
3/8
A 7C 8-F08005
3/8
A 7C 8-F08015
1/2
A 7C 8-F10005
1/2
A 7C 8-F10015
5/8
A 7C 8-F14005
5/8
A 7C 8-F14015
3/4
A 7C 8-F16005
3/4
A 7C 8-F16015
Bolt Size Shims (Shortening Shims)
1/4
A 7C 8-G08005
1/4
A 7C 8-G08015
1/4
A 7C 8-G08032
5/16
A 7C 8-G10005
5/16
A 7C 8-G10015
5/16
A 7C 8-G10032
3/8
A 7C 8-G12005
3/8
A 7C 8-G12015
3/8
A 7C 8-G12032
1/2
A 7C 8-G16005
1/2
A 7C 8-G16015
1/2
A 7C 8-G16032
5/8
A 7C 8-G20005
5/8
A 7C 8-G20015
5/8
A 7C 8-G20032
3/4
A 7C 8-G24005
3/4
A 7C 8-G24015
3/4
A 7C 8-G24032
10-50
Thread
Size
I.D.
O.D.
T
Thickness
#8
#8
#10
#10
1/4
1/4
5/16
5/16
7/16
7/16
1/2
1/2
.171
.171
.234
.234
.289
.289
.352
.352
.473
.473
.598
.598
.248
.248
.308
.308
.371
.371
.496
.496
.621
.621
.746
.746
.005
.015
.005
.015
.005
.015
.005
.015
.005
.015
.005
.015
.252
.252
.252
.313
.313
.313
.376
.376
.376
.501
.501
.501
.626
.626
.626
.751
.751
.751
.366
.366
.366
.424
.424
.424
.557
.557
.557
.738
.738
.738
.870
.870
.870
.995
.995
.995
.005
.015
.032
.005
.015
.032
.005
.015
.032
.005
.015
.032
.005
.015
.032
.005
.015
.032
PRECISION WASHERS
MACHINED
MATERIAL:
Inch
SPECIFICATION:
1
Precision
Component
T
1
2
3
I.D.
O.D.
5
INCH COMPONENT
O.D.
Catalog Number
.006
S740YY-0404116
S740YY-0504144
S740YY-0604169
S740YY-0705196
S740YY-0805257
S740YY-1006323
S740YY-1206386
1/4
5/16
3/8
7/16
1/2
5/8
3/4
T
Thickness
+.010
-.000
1/16
1/16
1/16
5/64
5/64
3/32
3/32
I.D.
.006
Screw Size
Ref.
.116
.144
.169
.196
.257
.323
.386
#4
#6
#8
#10
1/4
5/16
3/8
6
7
8
9
10
11
12
13
14
15
10-51
16
WASHERS
FLAT WASHERS
MATERIAL:
Inch
Stainless Steel
SPECIFICATION:
2
3
4
5
6
7
I.D.
O.D.
INCH COMPONENT
Catalog Number
A
A
A
A
A
A
A
A
A
A
A
9X20-00
9X20-02
9X20-02A
9X20-04
9X20-06
9X20-06A
9X20-08
9X20-10
9X20-14
9X20-51
9X20-38
I.D.
O.D.
.01
.006
Screw
Size
.064
.089
.101
.119
.146
.151
.172
.198
.265
.328
.390
.156
.187
.262
.312
.375
.387
.375
.437
.500
.562
.625
.020
.025
.031
.031
.031
.031
.031
.062
.062
.062
.062
#0
#2
#2
#4
#6
#6
#8
#10
1/4
5/16
3/8
.01
SINTERED THRUST WASHERS
MATERIAL:
SPECIFICATION:
Priced Per Each
10
I.D.
11
12
INCH COMPONENT
Catalog Number
13
14
15
16
O.D.
A
A
A
A
A
A
A
A
A
7B
7B
7B
7B
7B
7B
7B
7B
7B
10-52
7-0132
7-0192
7-0252
7-0312
7-0372
7-0374
7-0432
7-0512
7-0514
I.D.
O.D.
.005
.010
.1300
.1920
.2550
.3150
.3775
.3775
.4385
.5100
.5100
.370
.495
.620
.750
.750
.750
.750
1.000
1.000
T
Thickness
.0025
.062
.062
.062
.062
.062
.125
.062
.062
.125
SINTERED THRUST WASHERS

"S" SERIES
MATERIAL:
Inch
SPECIFICATIONS:
* I.D. tolerances: up to & including 1.253 is .005

over 1.253 & including 2.502 is .010
** O.D. tolerances: up to & including 1.500 is .010
over 1.500 & including 3.000 is +.015, -0
over 3.000 is +.020, -0
I.D.
O.D.
INCH COMPONENT
Catalog Number
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7-S080702
7-S080802
7-S081002
7-S101002
7-S101202
7-S121002
7-S121001
7-S121202
7-S121204
7-S141202
7-S141204
7-S161202
7-S161406
7-S161602
7-S161603
7-S161604
7-S182002
7-S182004
7-S201602
7-S201604
7-S201902
7-S201903
7-S201904
7-S202002
7-S202004
7-S212402
7-S212404
7-S242002
7-S242004
7-S242202
7-S242204
I.D.*
T
O.D.** .0025
.2550
.2550
.2550
.3150
.3150
.3850
.3800
.3800
.3800
.4400
.4400
.5050
.5050
.5100
.5100
.5100
.5650
.5650
.6280
.6280
.6280
.6280
.6280
.6280
.6280
.6560
.6560
.7530
.7530
.7530
.7530
.4375
.5000
.6250
.6250
.7500
.6250
.7500
.7500
.7500
.7500
.7500
.7500
.8750
1.0000
1.0000
1.0000
1.2500
1.2500
1.0000
1.0000
1.1875
1.1875
1.1875
1.2500
1.2500
1.5000
1.5000
1.2500
1.2500
1.3750
1.3750
1/16
1/16
1/16
1/16
1/16
1/16
1/32
1/16
1/8
1/16
1/8
1/16
3/16
1/16
3/32
1/8
1/16
1/8
1/16
1/8
1/16
3/32
1/8
1/16
1/8
1/16
1/8
1/16
1/8
1/16
1/8
Catalog Number
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7B
7-S242208
7-S242503
7-S282402
7-S282404
7-S283204
7-S283404
7-S322402
7-S322404
7-S322406
7-S322602
7-S322802
7-S322804
7-S323206
7-S324604
7-S343802
7-S402704
7-S403202
7-S403204
7-S403802
7-S403804
7-S405302
7-S483204
7-S484004
7-S485606
7-S503904
7-S563904
7-S564204
7-S644804
7-S644808
7-S655806
7-S805204
I.D.*
.7530
.7650
.8905
.8905
.8800
.8905
1.0030
1.0030
1.0030
1.0155
1.0120
1.0120
1.0160
1.0155
1.0625
1.2530
1.2650
1.2650
1.2650
1.2650
1.2550
1.5030
1.5050
1.5100
1.5780
1.7550
1.7650
2.0110
2.0110
2.0310
2.5020
T
O.D.** .0025
1.3750
1.5625
1.5000
1.5000
2.0000
2.1250
1.5000
1.5000
1.5000
1.6250
1.7500
1.7500
2.0000
2.8750
2.3750
1.6900
2.0000
2.0000
2.3750
2.3750
3.3120
2.0000
2.5050
3.5000
2.4375
2.4400
2.6250
3.0000
3.0000
3.6250
3.2500
1/4
3/32
1/16
1/8
1/8
1/8
1/16
1/8
3/16
1/16
1/16
1/8
3/16
1/8
1/16
1/8
1/16
1/8
1/16
1/8
1/16
1/8
1/8
3/16
1/8
1/8
1/8
1/8
1/4
3/16
1/8
4
5
6
7
8
9
10
11
12
13
14
15
10-53
16
I
R
NONMETALLIC FLAT WASHERS

INSULATES
SEALS
DAMPENS VIBRATION
PREVENTS GALLING
MATERIAL:
SPECIFICATIONS:
Inch
Nylon, Natural (Zytel 101) or

Polyvinyl Chloride (PVC), Gray
Nylon - Priced Per 1000 Pieces

PVC - Priced Per 100 Pieces
T
3
I.D.
O.D.
4
5
6
7
8
9
10
11
12
13
INCH COMPONENT
Catalog Number
Nylon, Natural (Zytel 101)
A 9M66-0401
A 9M66-0601
A 9M66-0603
A 9M66-0803
A 9M66-0802A
A 9M66-0903
A 9M66-0802B
A 9M66-1003
A 9M66-1203
A 9M66-1403
A 9M66-1603A
A 9M66-1603B
A 9M66-2806
A 9M66-3206
A 9M66-3606
A 9M66-4006
A 9M66-4209
A 9M66-4709
Polyvinyl Chloride (PVC), Gray
A 9P67-1606
A 9P67-2806
A 9P67-3206
A 9P67-4006
A 9P67-4209
A 9P67-4709
14
15
16
10-54
I.D.
O.D.
T
Thickness
Screw
Size
.065
.080
.093
.093
.105
.125
.125
.156
.187
.195
.227
.281
.343
.406
.500
.562
.656
.812
1/8
3/16
3/16
1/4
1/4
9/32
1/4
5/16
3/8
7/16
1/2
1/2
7/8
1
1-1/8
1-1/4
1-5/16
1-15/32
.010
.015
.031
.031
.020
.031
.020
.031
.031
.031
.031
.031
.062
.062
.062
.062
.093
.093
#0
#1
#2
#2
#3
#4
#5
#6
#8
#10
#12
1/4
5/16
3/8
7/16
1/2
5/8
3/4
9/32
11/32
13/32
9/16
21/32
13/16
1/2
7/8
1
1-1/4
1-5/16
1-1/2
1/16
1/16
1/16
1/16
3/32
3/32
1/4
5/16
3/8
1/2
5/8
3/4
INSULATING WASHERS
SHOULDER
PLAIN
R
Inch
MATERIAL:
Fiber per MIL-F-1148 b
SPECIFICATION:
1
D.S.
.032
Fig. 1
Shoulder
I.D.
O.D.
T
T
Fig. 2
Plain
I.D.
O.D.
INCH COMPONENT
Catalog Number *
Fig. 1 Shoulder
A 9P68-1009
A 9P68-1209A
A 9P68-1209C
A 9P68-1609A
A 9P68-1609B
A 9P68-1609C
A 9P68-2009
A 9P68-2009A
A 9P68-2009B
A 9P68-2409
Fig. 2 Plain
A 9P74-1006
A 9P74-1006A
A 9P74-1206
A 9P74-1206A
A 9P74-1206B
A 9P74-1606
A 9P74-1606A
A 9P74-1609
A 9P74-2006
A 9P74-2006A
A 9P74-2006B
A 9P74-3206
A 9P74-3206A
Screw
Size
I.D.
O.D.
D.S.
#10
#8
#10
1/4
1/4
17/64
1/4
5/16
3/8
3/8
.190
.164
.190
.250
.250
.265
.250
.313
.375
.375
.313
.375
.375
.500
.500
.500
.625
.625
.625
.750
.250
.246
.246
.312
.375
.365
.339
.500
.500
.500
.094
.094
.094
.094
.094
.094
.094
.094
.094
.094
#6
#10
#6
#8
#10
#10
1/4
1/4
1/4
5/16
3/8
3/8
1/2
.138
.190
.138
.164
.190
.190
.250
.250
.250
.313
.375
.375
.500
.313
.313
.375
.375
.375
.500
.500
.500
.625
.625
.625
1.000
1.000
.063
.063
.063
.063
.063
.063
.063
.093
.063
.063
.063
.063
.063
6
7
8
9
10
11
12
13
14
15
10-55
16
WASHERS
MOLDED SHOULDER WASHERS
R
T
INSULATES
SEALS
DAMPENS VIBRATION
PREVENTS GALLING
Inch
0
LENGTH
MATERIAL:
Nylon (ZYTEL 101)
SPECIFICATION:
O.D.
INCH COMPONENT
Catalog Number
5
6
7
8
9
I.D.
3
4
A
A
A
A
A
A
9M68-0904
9M68-1004
9M68-1205
9M68-1405
9M68-1806
9M68-2406
Screw
Size
I.D.
O.D.
Length
#4
#6
#8
#10
1/4
3/8
.122
.146
.174
.201
.260
.385
.281
.328
.375
.437
.562
.750
.040
.040
.050
.050
.060
.060
.187
.218
.250
.281
.375
.500
.040
.040
.050
.050
.060
.060
COUNTERSUNK FINISHING WASHERS

MAXIMUM STRENGTH
INSULATES
DAMPENS VIBRATION
PREVENTS SCRATCHING
I.D.
82
O.D.
MATERIAL:
Nylon (ZYTEL 101)
10
SPECIFICATION:
11
INCH COMPONENT
12
13
14
Catalog Number
A
A
A
A
9M69-1410
9M69-1611
9M69-1815
9M69-2218
15
16
10-56
Screw
Size
I.D.
O.D.
Length
#6
#8
#10
1/4
.143
.171
.191
.251
.437
.515
.580
.683
.100
.115
.152
.183
BELLEVILLE SPRING WASHERS

MATERIAL:
1074 Spring Steel (ASTM-A684)

302 Stainless Steel (AMS 5906)
R
Inch
SPECIFICATION:
T
1
2
3
4
DEFLECTION
HF
LOAD
I.D.
O.D.
HL
6
7
Fig. 1
Fig. 1
Series Stacking (washers opposing)
For a given load, the total deflection of the stack is
approximately equal to the individual washer deflection
multiplied by the number of washers in the stack.
Fig. 2
Fig. 2
Parallel Stacking (washers resting)
For a given deflection, the total load applied to the stack
is approximately equal to the individual washer load
multiplied by the number of washers in the stack.
Spring Steel
A
A
A
A
A
A
A
A
A
A
7Q
7Q
7Q
7Q
7Q
7Q
7Q
7Q
7Q
7Q
9-06010
9-08013
9-10016
9-12020
9-16025
9-20032
9-24040
9-32050
9-40062
9-48072
Stainless Steel
A
A
A
A
A
A
A
A
A
A
7X
7X
7X
7X
7X
7X
7X
7X
7X
7X
9-06010
9-08013
9-10016
9-12020
9-16025
9-20032
9-24040
9-32050
9-40062
9-48072
9
10
INCH COMPONENT
Catalog Number
I.D.
Min.
O.D.
Max.
T
Stock
Thick.
HF
Free
Height
.093
.125
.156
.190
.255
.317
.380
.505
.630
.750
.187
.250
.312
.375
.500
.625
.750
1.000
1.250
1.500
.0100
.0133
.0166
.0200
.0250
.0320
.0400
.0500
.0620
.0720
.015
.020
.025
.030
.038
.048
.059
.075
.092
.107
HL
Load @
Loaded
HL lbf
Height Min. Max.
.0125
.0170
.0210
.0250
.0310
.0400
.0490
.0620
.0770
.0890
13 17.6
22 30
35 48
51 69
80 110
123 167
199 271
289 391
403 547
565 765
Load
@
Flat
27.8
48.0
75.0
110.0
160.0
260.0
415.0
600.0
870.0
1180.0
11
12
13
14
15
10-57
16
CURVED SPRING WASHERS

MATERIAL:
301 Stainless Steel

Spring Steel AISI C1075 Blued
Inch
SPECIFICATION:
O.D.
HF APPROX.
DEFLECTION
HL
I.D.
5
6
7
8
9
INCH COMPONENT
Catalog Number
Stainless Steel
Steel
A
A
A
A
A
A
A
A
A
9-1W03205
9-1W03709
9-1W04911
9-1W05512
9-1W06113
9-1W06715
9-1W07311
9-1W07316
9-1W08518
9-1W09814
9-1W09821
7X
7X
7X
7X
7X
7X
7X
7X
7X
A 7X
A 7X
A 7X
A 7X
A 7X
A 7X
9-1W02406
9-1W02704
9-1W02707
9-1W03205
9-1W03207
9-1W03706
9-1W03709
9-1W04210
9-1W04907
9-1W06109
9-1W06113
9-1W07311
9-1W07316
9-1W08518
9-1W09821
10
11
12
13
14
15
16
LOAD
10-58
A 7Q
A 7Q
A 7Q
A 7Q
A
A
A
A
A
A
A
7Q
7Q
7Q
7Q
7Q
7Q
7Q
I.D.
O.D.
T
Stock
Thick.
HF
Free
Height
.135
.148
.148
.174
.174
.200
.200
.231
.265
.265
.296
.327
.327
.363
.395
.395
.462
.525
.525
.245
.270
.270
.322
.322
.370
.370
.423
.490
.490
.551
.612
.612
.672
.735
.735
.857
.980
.980
.0060
.0045
.0070
.0050
.0075
.0060
.0090
.0100
.0075
.0110
.0120
.0090
.0130
.0150
.0110
.0160
.0180
.0140
.0210
.034
.052
.035
.064
.042
.069
.047
.053
.091
.063
.070
.113
.077
.081
.129
.086
.100
.164
.110
HL
For
Load @
Loaded HL 15% Screw
lbf
Height
Size
.020
.028
.022
.034
.025
.035
.028
.032
.046
.034
.038
.060
.042
.047
.073
.050
.057
.083
.063
2.00
1.25
2.50
1.50
3.00
2.25
4.50
5.00
3.50
7.00
8.00
4.50
9.00
11.00
6.00
12.00
15.00
10.00
20.00
#5
#6
#6
#8
#8
#10
#10
#12
1/4
1/4
9/32
5/16
5/16
11/32
3/8
3/8
7/16
1/2
1/2
WAVE SPRING WASHERS

THIN WALL SERIES
MATERIAL:
302 Stainless Steel (MIL-S-5057), Unfinished
Inch
SPECIFICATION:

O.D.
HF APPROX.
DEFLECTION
HL
I.D.
T
1
LOAD
2
3
INCH COMPONENT
Catalog Number
A
A
A
A
A
A
7X
7X
7X
7X
7X
7X
9-3W03606
9-3W04907
9-3W06108
9-3W07309
9-3W08510
9-3W11012
I.D.
O.D.
T
Stock
Thickness
HF
Free
Height
HL
Loaded
Height
Load @
HL
.265
.350
.440
.531
.650
.856
.367
.492
.618
.734
.855
1.102
.006
.007
.008
.009
.010
.012
.030
.035
.040
.050
.060
.075
.015
.020
.025
.030
.030
.037
24
35
35
47
47
9 13
Use
Inside
Bore
Ref.
lbf
3/8
1/2
5/8
3/4
7/8
1-1/8
NOTE: O.D. and I.D. are blank (before bend) dimensions.
4
5
6
7
SCREW SIZE SERIES

MATERIAL:
Beryllium Copper or Stainless Steel
SPECIFICATION:

I.D.
10
O.D.
11
INCH COMPONENT
Catalog Number
Beryllium Copper
Stainless Steel
AB3401-EA150X006
AB3401-EA206X006
AB3401-EA250X006
AB3401-EA265X006
AB3401-EA300X008
AB3401-EA340X010
AB3401-EA375X012
AB3401-EA500X014
AB3401-EA600X014
AB3401-EA700X022
AB3401-EA950X022
AB3401-XP150X006
AB3401-XP206X006
AB3401-XP250X006
AB3401-XP265X006
AB3401-XP300X008
AB3401-XP340X010
AB3401-XP375X012
AB3401-XP500X014
AB3401-XP600X014
AB3401-XP700X022
AB3401-XP950X022
I.D.
O.D.
Nominal
Screw
Size
.075
.095
.125
.134
.152
.176
.203
.266
.332
.406
.531
.150
.206
.250
.265
.300
.340
.375
.500
.600
.700
.950
.006
.006
.006
.006
.008
.010
.012
.014
.014
.022
.022
.017
.018
.021
.021
.028
.030
.032
.042
.052
.064
.076
#0
#2
#4
#5
#6
#8
#10
1/4
5/16
3/8
1/2
10-59
12
13
14
15
16
SPLIT LOCK WASHERS

ASME B18.21.1
MATERIAL:
Alloy Steel or Stainless Steel
T
1
Inch
FINISH:
Black Oxide for Alloy Steel
SPECIFICATION:
O.D. I.D.
4
INCH COMPONENT
5
6
7
8
Catalog Number
Alloy Steel with
Black Oxide Finish
A
A
A
A
A
A
A
A
A
9Q19-00
9Q19-02
9Q19-04
9Q19-06
9Q19-08
9Q19-10
9Q19-25
9Q19-31
9Q19-37
9
10
11
12
13
14
15
16
10-60
Stainless Steel
A
A
A
A
A
A
A
A
A
9X19-00
9X19-02
9X19-04
9X19-06
9X19-08
9X19-10
9X19-25
9X19-31
9X19-37
Screw
Size
Ref.
I.D.
Max.
O.D.
Max.
T
Min.
#0
#2
#4
#6
#8
#10
1/4
5/16
3/8
.062
.094
.120
.148
.174
.200
.260
.322
.385
.137
.172
.209
.250
.293
.334
.487
.583
.680
.017
.020
.025
.031
.040
.047
.062
.078
.094
LOCK WASHERS
ASME B18.21.1
MATERIAL:
Inch
Stainless Steel
SPECIFICATION:
T
1
O.D.
O.D.
I.D.
I.D.
Fig. 1 Internal
Fig. 2 External
INCH COMPONENT
Catalog Number
Fig. 1 Internal
A 9X21-I02
A 9X21-I04
A 9X21-I06
A 9X21-I08
A 9X21-I10
A 9X21-I25
A 9X21-I31
A 9X21-I38A
A 9X21-I38B
Fig. 2 External
A 9X21-E04
A 9X21-E06
A 9X21-E08
A 9X21-E10
A 9X21-E25
A 9X21-E38
I.D.
Screw
Size
O.D.
#2
#4
#6
#8
#10
1/4
5/16
3/8
3/8
#4
#6
#8
#10
1/4
3/8
Min.
Max.
.200
.270
.295
.340
.381
.478
.610
.692
.562
.010
.015
.017
.018
.020
.023
.028
.032
.032
.015
.019
.021
.023
.025
.028
.034
.040
.040
.260
.320
.381
.410
.510
.694
.015
.016
.018
.020
.023
.032
.019
.022
.023
.025
.028
.040
6
7
8
9
10
11
12
13
14
15
10-61
16
BEARING RETAINERS
INTERNAL PUSH-IN DESIGN
MATERIAL:
Hi-Carbon Steel, Zinc Plated
T
1
2
Inch
FEATURES:
Use as internal shoulder

Locate bearing
Locate components
SPECIFICATIONS:
I.D. Tolerance:
.136 to .237 in. .005
.258 to 1.188 in. .010
HOUSING
OUTER
RACE
SPACER
3
4
BEARING
5
INCH COMPONENT
Catalog Number
9
10
11
S
Housing Dia.
Fraction
S73PH1-PIR005031
S73PH1-PIR005037
S73PH1-PIR005043
S73PH1-PIR005050
S73PH1-PIR005056
S73PH1-PIR005062
S73PH1-PIR005075
S73PH1-PIR005087
S73PH1-PIR005093
S73PH1-PIR005100
S73PH1-PIR005125
S73PH1-PIR005144
S73PH1-PIR005150
12
13
14
15
16
I.D.
10-62
5/16
3/8
7/16
1/2
9/16
5/8
3/4
7/8
15/16
1
1-1/4
1-7/16
1-1/2
I.D.
Decimal
.136
.311 .313
.175
.374 .376
.237
.437 .439
.258
.498 .502
.312
.560 .564
.390
.623 .627
.500
.748 .752
.625
.873 .877
.687
.936 .940
.998 1.002 .750
1.248 1.252 .938
1.436 1.440 1.117
1.498 1.502 1.188
No.
of
Prongs
T
Tolerance
6
6
6
6
6
6
8
8
10
10
10
12
12
.010
.010
.010
.010
.010
.010
.015
.015
.015
.015
.015
.015
.015
.001
.001
.001
.001
.001
.001
.002
.002
.002
.002
.002
.002
.002
Allowable
Z
Thrust Minimum
Load
End
lbf
Space
80
75
70
60
50
45
75
70
70
70
60
60
60
.040
.040
.040
.040
.040
.040
.060
.060
.060
.060
.060
.060
.060
RETAINING RINGS
EXTERNAL BOWED
RADIAL ASSEMBLY
FOR END-PLAY TAKE-UP
Inch
MATERIAL:
Stainless Steel (PH 15-7 Mo)
SPECIFICATIONS:
G Tolerance:
.095 to .147 in. +.002/-.000
.210 to .675 in. +.003/-.000
RETAINER
SHAFT
B
W
V MINIMUM
D
Shaft Dia.
B
Ring
O.D.
Fraction Decimal
.125
.188
.250
.312
.375
.438
.500
.625
.750
.875
1/8
3/16
1/4
5/16
3/8
7/16
1/2
5/8
3/4
7/8
S73KW2-131-12
S73KW2-131-18
S73KW2-131-25
S73KW2-131-31
S73KW2-131-37
S73KW2-131-43
S73KW2-131-50
S73KW2-131-62
S73KW2-131-75
S73KW2-131-87
INCH COMPONENT
Catalog Number
.230
.335
.527
.500
.660
.687
.800
.940
1.120
1.300
W
T
G
Groove Ring
Groove Width Thick.
+.003
Dia.
.002
V
Min.
.010 *
.015
.025
.025
.035
.035
.042
.042
.050
.050
.025
.033
.050
.050
.060
.060
.075
.080
.090
.090
-.000
.095
.147
.210
.250
.303
.343
.396
.485
.580
.675
.022
.030
.047
.047
.060
.060
.073
.077
.085
.085
Approx.
Force
End Required
Play to Flatten
Takeup Rings
lbf
8
12
35
30
55
50
90
85
110
120
.005
.007
.010
.010
.010
.010
.014
.014
.016
.016
4
5
6
7
* Thickness tolerance: .001
8
EXTERNAL GROOVELESS
FOR AXIAL ASSEMBLY
NO GROOVE REQUIRED
MATERIAL:
10

D
11
INCH COMPONENT
D Shaft Dia.
Catalog Number
S73NW2-GR555-09
S73NW2-GR555-12
S73NW2-GR555-15
S73NW2-GR555-18
S73NW2-GR555-25
S73NW2-GR555-31
S73NW2-GR555-37
S73NW2-GR555-43
S73NW2-GR555-50
S73NW2-GR555-62
S73NW2-GR555-75
Fraction
3/32
1/8
5/32
3/16
1/4
5/16
3/8
7/16
1/2
5/8
3/4
Decimal
From
.092
.123
.154
.185
.248
.310
.373
.434
.497
.622
.745
To
.096
.127
.158
.189
.252
.316
.379
.440
.503
.628
.755
C
Ring
Clearance
Dia.
H
Ring
Height
.26
.33
.36
.44
.49
.68
.74
.81
.90
1.06
1.32
.207
.268
.307
.364
.437
.553
.620
.701
.768
.948
1.115
.025
.025
.025
.035
.035
.042
.042
.050
.050
.062
.062
Thickness
Allowable
Load
lbf
Tolerance
.002
.002
.002
.003
.003
.003
.003
.003
.003
.004
.004
8
10
12
20
23
25
30
40
45
60
65
10-63
12
13
14
15
16
RETAINING RINGS
EXTERNAL
MATERIAL:
T
1
2
3
Inch
SPECIFICATIONS:
A Tolerance:
.225 in.
.250 to .461 in.
.509 to .925 in.
1.041 to 1.387 in.
1.446 to 1.503 in.
+.002/-.004
+.002/-.005
+.005/-.010
+.010/-.015
+.013/-.020
G Tolerance:
.230 in.
.255 to .530 in.
.588 to .940 in.
1.059 to 1.406 in.
1.468 to 1.529 in.
.0015
.002
.003
.004
.005
W Tolerance:
.029 to .046 in. +.003/-.000
.056 to .068 in. +.004/-.000
T Tolerance:
.025 to .050 in. .002
.062 in. .003
D G
GROOVE DETAIL MAX. BOTTOM RADII:

.003 (S73HW2-100-025 THRU S73HW2-100-035)
.005 (S73HW2-100-037 THRU S73HW2-100-100)
.010 (S73HW2-100-112 THRU S73HW2-100-162)
6
7
8
9
10
11
12
13
14
15
16
INCH COMPONENT
Catalog Number
A
Free
Dia.
S73HW2-100-025
S73HW2-100-027
S73HW2-100-028
S73HW2-100-031
S73HW2-100-034
S73HW2-100-035
S73HW2-100-037
S73HW2-100-039
S73HW2-100-043
S73HW2-100-046
S73HW2-100-050
S73HW2-100-055
S73HW2-100-056
S73HW2-100-062
S73HW2-100-068
S73HW2-100-075
S73HW2-100-087
S73HW2-100-100
S73HW2-100-112
S73HW2-100-118
S73HW2-100-125
S73HW2-100-131
S73HW2-100-137
S73HW2-100-143
S73HW2-100-150
S73HW2-100-156
S73HW2-100-162
.225
.250
.256
.281
.309
.320
.338
.354
.395
.428
.461
.509
.521
.579
.635
.693
.810
.925
1.041
1.098
1.156
1.214
1.272
1.333
1.387
1.446
1.503
C
Ring
Clear.
Dia.
.45
.48
.49
.54
.57
.58
.60
.62
.66
.69
.77
.81
.82
.90
1.01
1.09
1.21
1.41
1.55
1.61
1.69
1.75
1.80
1.87
1.99
2.10
2.17
D
Shaft
Dia.
.250
.276
.281
.312
.344
.354
.375
.394
.438
.469
.500
.551
.562
.625
.688
.750
.875
1.000
1.125
1.187
1.250
1.312
1.375
1.438
1.500
1.562
1.625
G
W
Groove Groove
Dia.
Width
.230
.255
.261
.290
.321
.330
.352
.369
.412
.443
.468
.519
.530
.588
.646
.704
.821
.940
1.059
1.118
1.176
1.232
1.291
1.350
1.406
1.468
1.529
.029
.029
.029
.029
.029
.029
.029
.029
.029
.029
.039
.039
.039
.039
.046
.046
.046
.046
.056
.056
.056
.056
.056
.056
.056
.068
.068
Max. ring thickness will be at least .002 less than listed minimum groove width W.
* Thrust Strength Factor of Safety: Rings = 4 Grooves = 2
10-64
T
Ring
Thick.
.025
.025
.025
.025
.025
.025
.025
.025
.025
.025
.035
.035
.035
.035
.042
.042
.042
.042
.050
.050
.050
.050
.050
.050
.050
.062
.062
Thrust Strength *
Load lbf
Ring
Groove
590
650
660
740
800
820
870
940
1020
1100
1650
1800
1850
2060
3400
3700
4300
4950
6600
7000
7350
7750
8100
8500
8800
11400
11850
175
195
200
240
265
300
320
335
400
450
550
600
650
800
1000
1200
1650
2100
2600
2950
3250
3700
4100
4500
5000
5200
5500
RETAINING RINGS
EXTERNAL
MATERIAL:
Beryllium Copper (Berylco 25)

Carbon Spring Steel (SAE 1065 - 1090), Oil-Dipped
Inch
TENSILE STRENGTH:
45,000 psi
SPECIFICATIONS:
A Tolerance:
.112 to .225 in. +.002/-.004
.250 to .461 in. +.002/-.005
Beryllium Copper
Carbon Spring Steel
G Tolerance:
.117 to .230 in. .0015
.255 to .468 in. .002
D G
W Tolerance:
.012 to .018 in. +.002/-.000
.029 to .039 in. +.003/-.000
T Tolerance:
.010 in. .001
.015 to .035 in. .002

.003 (A 9Q27-012 THRU A 9Q27-035)
.005 (A 9Q27-037 THRU A 9Q27-050)
5
6
INCH COMPONENT
Catalog Number
A
Free
Dia.
C
Ring
Clear.
Dia.

.22
.112
A 9Q27-012
.142
.27
A 9Q27-015
.30
.168
A 9Q27-018
.32
.179
A 9Q27-019
.196
.33
A 9Q27-021
.36
.215
A 9Q27-023
.45
.225
A 9Q27-025
.48
.250
A 9Q27-027
.256
.49
A 9Q27-028
.54
.281
A 9Q27-031
.57
.309
A 9Q27-034
.58
.320
A 9Q27-035
.60
.338
A 9Q27-037
.354
.62
A 9Q27-039
.366
.63
A 9Q27-040
.66
.395
A 9Q27-043
.428
.69
A 9Q27-046
.77
.461
A 9Q27-050
D
Shaft
Dia.
G
W
Groove Groove
Dia.
Width
T
Ring
Thick.
Thrust Strength *
Ring
Groove
.125
.156
.188
.197
.219
.236
.117
.146
.175
.185
.205
.222
.012
.012
.018
.018
.018
.018
.010
.010
.015
.015
.015
.015
112
132
244
254
284
315
35
55
80
85
110
120
.250
.276
.281
.312
.344
.354
.375
.394
.406
.438
.469
.500
.230
.255
.261
.290
.321
.330
.352
.369
.382
.412
.443
.468
.029
.029
.029
.029
.029
.029
.029
.029
.029
.029
.029
.039
.025
.025
.025
.025
.025
.025
.025
.025
.025
.025
.025
.035
599
660
670
751
812
832
883
954
964
1035
1117
1675
175
195
200
240
265
300
320
335
350
400
450
550
lbf Max.
8
9
10
11
12
13
14
15
10-65
REV: 07.03.12 mh
16
RETAINING RINGS
EXTERNAL
MATERIAL:
Inch
TENSILE STRENGTH:
45,000 psi
SPECIFICATIONS:
A Tolerance:
.579 to .925 in.
1.041 to 1.156 in.
1.446 to 1.850 in.
1.964 to 2.313 in.
2.543 to 2.775 in.
+.005/-.010
+.010/-.015
+.013/-.020
+.015/-.025
+.020/-.030
G Tolerance:
.588 to .940 in.
1.059 to 1.176 in.
1.468 to 1.886 in.
2.003 to 2.838 in.
.003
.004
.005
.006
1
Carbon Spring Steel
D G
W Tolerance:
.039 to .046 in. +.003/-.000
.056 to .068 in. +.004/-.000
.086 to .103 in. +.005/-.020

.005 (A 9Q27-062 THRU A 9Q27-087)
.010 (A 9Q27-100 THRU A 9Q27-300)
T Tolerance:
.035 to .050 in. .002
.062 to .093 in. .003
INCH COMPONENT
Catalog Number
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
9Q27-062
9Q27-075
9Q27-087
9Q27-100
9Q27-112
9Q27-125
9Q27-156
9Q27-175
9Q27-187
9Q27-200
9Q27-212
9Q27-225
9Q27-237
9Q27-250
9Q27-275
9Q27-300
A
Free
Dia.
.579
.693
.810
.925
1.041
1.156
1.446
1.618
1.735
1.850
1.964
2.081
2.197
2.313
2.543
2.775
C
Ring
Clear.
Dia.
.90
1.09
1.21
1.41
1.55
1.69
2.10
2.31
2.44
2.60
2.78
2.88
3.06
3.17
3.48
3.60
D
Shaft
Dia.
.625
.750
.875
1.000
1.125
1.250
1.562
1.750
1.875
2.000
2.125
2.250
2.375
2.500
2.750
3.000
G
W
Groove Groove
Dia.
Width
.588
.704
.821
.940
1.059
1.176
1.468
1.650
1.769
1.886
2.003
2.120
2.239
2.360
2.602
2.838
.039
.046
.046
.046
.056
.056
.068
.068
.068
.068
.086
.086
.086
.086
.103
.103
T
Ring
Thick.
.035
.042
.042
.042
.050
.050
.062
.062
.062
.062
.078
.078
.078
.078
.093
.093
Thrust Strength *
lbf Max.
Ring
Groove
2091
3756
4365
5024
6699
7460
11571
12992
13906
14819
19793
21011
22127
23345
30551
33394
800
1200
1650
2100
2600
3250
5200
6200
7000
8050
9150
10350
11400
12350
14400
17200
9
10
11
12
13
14
15
10-66
REV: 07.03.12 mh
16
RETAINING RINGS
INTERNAL
MATERIAL:

Inch
TENSILE STRENGTH:
45,000 psi
SPECIFICATIONS:
A Tolerance:
.280 to .859 in. +.010/-.005
.901 to 1.111 in. +.015/-.010
G Tolerance:
.268 to .030 in. .001
.397 to .796 in. .002
.825 to 1.066 in. .002
W Tolerance:
.018 in. +.002/-.000
.029 to .046 in. +.003/-.000
G D
3
4
Carbon Spring Steel (SAE 1065 - 1090), Oil-Dipped - Priced Per 100 Pieces
Stainless Steel (PH 15-7 Mo) - Priced Per 10 Pieces
GROOVE DETAIL
.005 MAX.
BOTTOM RADII
INCH COMPONENT
Catalog Number
D
Housing
Dia.
A
Free
Dia.

.250
.280
A 9Q28-25
.312
.346
A 9Q28-31
.375
.415
A 9Q28-37
.438
.482
A 9Q28-43
.453
.498
A 9Q28-45
.500
.548
A 9Q28-50
.512
.560
A 9Q28-51
.562
.620
A 9Q28-56
.625
.694
A 9Q28-62
.688
.763
A 9Q28-68
.750
.831
A 9Q28-75
.777
.859
A 9Q28-77
.812
.901
A 9Q28-81
.866
.961
A 9Q28-86
.875
.971
A 9Q28-87
.901
1.000
A 9Q28-90
.938
1.041
A 9Q28-93
1.000
1.111
A 9Q28-100
.250
.280
A 9Y28-25
.312
.346
A 9Y28-31
.375
.415
A 9Y28-37
.500
.548
A 9Y28-50
.625
.694
A 9Y28-62
.750
.831
A 9Y28-75
.875
.971
A 9Y28-87
1.000
1.111
A 9Y28-100
C
Ring
Clear.
Dia.
G
Groove
Dia.
W
Groove
Width
.11
.17
.20
.23
.25
.26
.27
.28
.34
.40
.44
.47
.48
.53
.54
.57
.60
.67
.268
.330
.397
.461
.477
.530
.542
.596
.665
.732
.796
.825
.862
.920
.931
.959
1.000
1.066
.11
.17
.20
.26
.34
.44
.54
.67
.268
.330
.397
.530
.665
.796
.931
1.066
T
Ring
Thick.
Thrust Strength
lbf
.002
Ring
Groove
.018
.018
.029
.029
.029
.039
.039
.039
.039
.039
.039
.046
.046
.046
.046
.046
.046
.046
.015
.015
.025
.025
.025
.035
.035
.035
.035
.035
.035
.042
.042
.042
.042
.042
.042
.042
1280
1600
3500
4100
4200
6500
6700
7400
8200
9000
9900
15000
16000
17000
17000
17500
18000
19000
320
395
580
740
765
1060
1085
1350
1760
2140
2400
2600
2800
3300
3400
3600
4100
4700
.018
.018
.029
.039
.039
.039
.046
.046
.015
.015
.025
.035
.035
.035
.042
.042
1280
1600
3500
6500
8200
9900
17000
19000
320
395
580
1060
1760
2400
3400
4700
7
8
9
10
11
12
13
14
15
10-67
16
I
R
RETAINING RINGS
EXTERNAL
SNAP-ON DESIGN
MATERIAL:
Inch
TENSILE STRENGTH:
225,000 psi
1
2
3
SPECIFICATIONS:
G Tolerance:
.052 to .147 in. +.002/-.000
.210 to .835 in. +.003/-.000
W Tolerance:
.012 to .020 in. +.002/-.000
.029 to .056 in. +.003/-.000
D G
W
T
5
6
INCH COMPONENT
Catalog Number
7
8
9
10
11
12

S73LW2-ER133-06
S73LW2-ER133-06A
S73LW2-ER133-09
S73LW2-ER133-12
S73LW2-ER133-15
S73LW2-ER133-18
S73LW2-ER133-25
S73LW2-ER133-31
S73LW2-ER133-37
S73LW2-ER133-43
S73LW2-ER133-50
S73LW2-ER133-62
S73LW2-ER133-75
S73LW2-ER133-87
Cold Rolled Steel
S73LW2-ER133-98C
* Thickness tolerance: .001.
13
14
15
16
10-68
Fraction
Decimal
C
Ring
Clear.
Dia.
1/16
1/16
3/32
1/8
5/32
3/16
1/4
5/16
3/8
7/16
1/2
5/8
3/4
7/8
.062
.062
.094
.125
.156
.188
.250
.312
.375
.438
.500
.625
.750
.875
.165
.200
.200
.240
.295
.350
.540
.520
.680
.710
.820
.960
1.140
1.320
.052
.052
.074
.095
.116
.147
.210
.250
.303
.343
.396
.485
.580
.675
1.000
1.530
.835
D
Shaft Dia.
G
W
Groove Groove
Dia.
Width
T
Ring
Thick.
Thrust Strength
lbf
.002
Ring
Groove
.012
.023
.020
.020
.029
.029
.029
.029
.039
.039
.046
.046
.056
.056
.010 *
.020
.015
.015
.025
.025
.025
.025
.035
.035
.042
.042
.050
.050
7
7
45
65
175
190
255
325
690
830
1110
1420
2000
2350
20
40
20
45
75
90
115
225
315
480
600
1050
1500
2050
.056
.050
2650
1900
E-RINGS
EXTERNAL
MATERIAL:
Beryllium Copper (Berylco 25) or

Carbon Spring Steel (SAE 1065-1090), Oil Dipped
Inch
TENSILE STRENGTH:
45,000 psi
SPECIFICATIONS:
A Tolerance:
.025 to .207 in. +.001/-.003
.243 to .392 in. +.002/-.004
G Tolerance:
.026 to .188 in. +.002/-.000
.210 to .396 in. +.003/-.000
W Tolerance:
.012 to .018 in. +.002/-.000
.029 to .046 in. +.003/-.000
A B
T Tolerance:
.010 in. .001
.015 to .042 in. .002
D G
4
W

Rings conform to MS16633 &MIL-R-21248

components, call on our application engineers.
7
INCH COMPONENT
Catalog Number
A
Free
Dia.

A 9Q29-04
.025
Carbon Spring Steel (SAE 1065-1090)
A 9Q29-X06
.051
A 9Q29-06
.051
A 9Q29-09
.073
A 9Q29-X09
.069
A 9Q29-X11
.076
A 9Q29-12
.094
A 9Q29-X14
.100
A 9Q29-Y14
.109
A 9Q29-14
.102
A 9Q29-15
.114
A 9Q29-X17
.125
A 9Q29-18
.145
A 9Q29-X18
.122
A 9Q29-X21
.185
A 9Q29-25
.207
A 9Q29-X31
.243
A 9Q29-37
.300
A 9Q29-43
.337
A 9Q29-X43
.375
A 9Q29-50
.392
Thrust Strength
B
Ring
O.D.
D
Shaft
Dia.
G
Groove
Dia.
W
Groove
Width
T
Ring
Thick.
.079
.040
.026
.012
.010
33
13
.140
.156
.187
.230
.375
.230
.203
.250
.270
.282
.312
.335
.375
.437
.527
.500
.660
.687
.600
.800
.062
.062
.094
.094
.110
.125
.140
.140
.140
.156
.172
.188
.188
.218
.250
.312
.375
.437
.437
.500
.052
.052
.074
.074
.079
.095
.102
.112
.105
.116
.127
.147
.125
.188
.210
.250
.303
.343
.380
.396
.012
.012
.018
.018
.018
.018
.018
.018
.029
.029
.029
.029
.029
.029
.029
.029
.039
.039
.039
.046
.010
.010
.015
.015
.015
.015
.015
.015
.025
.025
.025
.025
.025
.025
.025
.025
.035
.035
.035
.042
60
60
150
150
180
210
240
240
450
480
540
570
585
675
780
975
1650
1900
1800
3300
15
15
44
44
75
85
125
95
110
145
175
175
270
155
235
455
630
960
600
1200
lbf
Ring
Groove
10-69
8
9
10
11
12
13
14
15
16
PRECISION DOWEL PINS

MATERIAL:
SPECIFICATION:
Inch
Other lengths and diameters available

on special order.
CHAMFER
BOTH ENDS
1
2
INCH COMPONENT
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Catalog Number
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
9X31-0103
9X31-0104
9X31-0105
9X31-0106
9X31-0107
9X31-0108
9X31-0110
9X31-0112
9X31-0114
9X31-0116
9X31-0118
9X31-0120
9X31-0124
9X31-0128
9X31-0203
9X31-0204
9X31-0205
9X31-0206
9X31-0207
9X31-0208
9X31-0210
9X31-0212
9X31-0214
9X31-0216
9X31-0218
9X31-0220
9X31-0224
9X31-0228
9X31-0232
9X31-0303
9X31-0304
9X31-0305
9X31-0306
9X31-0307
9X31-0308
9X31-0310
9X31-0312
9X31-0314
9X31-0316
9X31-0318
9X31-0320
9X31-0324
9X31-0328
9X31-0332
9X31-0340
10-70
D
Dia.
+.0002
-.0000
.0312
.0312
.0312
.0312
.0312
.0312
.0312
.0312
.0312
.0312
.0312
.0312
.0312
.0312
.0625
.0625
.0625
.0625
.0625
.0625
.0625
.0625
.0625
.0625
.0625
.0625
.0625
.0625
.0625
.0937
.0937
.0937
.0937
.0937
.0937
.0937
.0937
.0937
.0937
.0937
.0937
.0937
.0937
.0937
.0937
L
Length
.01
.094
.125
.156
.188
.219
.250
.312
.375
.438
.500
.562
.625
.750
.875
.094
.125
.156
.188
.219
.250
.312
.375
.438
.500
.562
.625
.750
.875
1.000
.094
.125
.156
.188
.219
.250
.312
.375
.438
.500
.562
.625
.750
.875
1.000
1.250
Catalog Number
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
9X31-0344
9X31-0348
9X31-0403
9X31-0404
9X31-0405
9X31-0406
9X31-0407
9X31-0408
9X31-0410
9X31-0412
9X31-0414
9X31-0416
9X31-0418
9X31-0420
9X31-0424
9X31-0428
9X31-0432
9X31-0440
9X31-0444
9X31-0448
9X31-0456
9X31-0464
9X31-0608
9X31-0610
9X31-0612
9X31-0614
9X31-0616
9X31-0620
9X31-0624
9X31-0628
9X31-0632
9X31-0640
9X31-0648
9X31-0656
9X31-0664
9X31-0816
9X31-0820
9X31-0824
9X31-0828
9X31-0832
9X31-0840
9X31-0848
9X31-0856
9X31-0864
D
Dia.
L
Length
.0937
.0937
.1250
.1250
.1250
.1250
.1250
.1250
.1250
.1250
.1250
.1250
.1250
.1250
.1250
.1250
.1250
.1250
.1250
.1250
.1250
.1250
.1875
.1875
.1875
.1875
.1875
.1875
.1875
.1875
.1875
.1875
.1875
.1875
.1875
.2500
.2500
.2500
.2500
.2500
.2500
.2500
.2500
.2500
1.375
1.500
.094
.125
.156
.188
.219
.250
.312
.375
.438
.500
.562
.625
.750
.875
1.000
1.250
1.375
1.500
1.750
2.000
.250
.312
.375
.438
.500
.625
.750
.875
1.000
1.250
1.500
1.750
2.000
.500
.625
.750
.875
1.000
1.250
1.500
1.750
2.000
+.0002
-.0000
.01
STANDARD DOWEL PINS

HARDENED
MS16555
R
Inch
MATERIAL:
Heat-Treated Type 416 Stainless Steel,

Rc 36-42, Clear Passivated
CHAMFER
BOTH ENDS
SPECIFICATION:

INCH COMPONENT
Catalog Number
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
9Y31-0206
9Y31-0208
9Y31-0210
9Y31-0212
9Y31-0214
9Y31-0216
9Y31-0220
9Y31-0224
9Y31-0310
9Y31-0312
9Y31-0314
9Y31-0316
9Y31-0320
9Y31-0324
9Y31-0328
9Y31-0332
9Y31-0412
9Y31-0414
9Y31-0416
9Y31-0420
9Y31-0424
9Y31-0428
D
Dia.
L
Length
.0627
.0627
.0627
.0627
.0627
.0627
.0627
.0627
.0940
.0940
.0940
.0940
.0940
.0940
.0940
.0940
.1252
.1252
.1252
.1252
.1252
.1252
.188
.250
.312
.375
.437
.500
.625
.750
.312
.375
.437
.500
.625
.750
.875
1.000
.375
.437
.500
.625
.750
.875
.0001
.01
Catalog Number
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
9Y31-0432
9Y31-0440
9Y31-0448
9Y31-0516
9Y31-0520
9Y31-0524
9Y31-0528
9Y31-0532
9Y31-0540
9Y31-0620
9Y31-0624
9Y31-0628
9Y31-0632
9Y31-0640
9Y31-0648
9Y31-0824
9Y31-0828
9Y31-0832
9Y31-0840
9Y31-0848
9Y31-0856
9Y31-0864
D
Dia.
L
Length
.1252
.1252
.1252
.1564
.1564
.1564
.1564
.1564
.1564
.1877
.1877
.1877
.1877
.1877
.1877
.2502
.2502
.2502
.2502
.2502
.2502
.2502
1.000
1.250
1.500
.500
.625
.750
.875
1.000
1.250
.625
.750
.875
1.000
1.250
1.500
.750
.875
1.000
1.250
1.500
1.750
2.000
.0001
.01
5
6
7
8
9
10
11
12
13
14
15
10-71
16
I
R
T
STANDARD DOWEL PINS

PRECISION GROUND
HARDENED
ASME B18.8.2
Inch
MATERIAL:
Heat-Treated Alloy Steel, Rc 58-62
SPECIFICATION:

CHAMFER
CROWN
8
2
D
4
5
6
7
8
9
10
11
12
INCH COMPONENT
Catalog Number
A 9Q32-0206
A 9Q32-0208
A 9Q32-0212
A 9Q32-0216
A 9Q32-0220
A 9Q32-0224
A 9Q32-0228
A 9Q32-0232
A 9Q32-0306
A 9Q32-0308
A 9Q32-0316
A 9Q32-0320
A 9Q32-0324
A 9Q32-0328
A 9Q32-0332
A 9Q32-0412
A 9Q32-0416
A 9Q32-0420
A 9Q32-0424
A 9Q32-0428
A 9Q32-0432
A 9Q32-0436
A 9Q32-0440
A 9Q32-0444
A 9Q32-0448
13
14
15
16
10-72
D
Dia.
L
Length
.0627
.0627
.0627
.0627
.0627
.0627
.0627
.0627
.0940
.0940
.0940
.0940
.0940
.0940
.0940
.1252
.1252
.1252
.1252
.1252
.1252
.1252
.1252
.1252
.1252
.188
.250
.375
.500
.625
.750
.875
1.000
.188
.250
.500
.625
.750
.875
1.000
.375
.500
.625
.750
.875
1.000
1.125
1.250
1.375
1.500
.0001
.012
Catalog Number
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
9Q32-0456
9Q32-0464
9Q32-0616
9Q32-0624
9Q32-0628
9Q32-0632
9Q32-0636
9Q32-0644
9Q32-0648
9Q32-0656
9Q32-0664
9Q32-0816
9Q32-0820
9Q32-0824
9Q32-0828
9Q32-0832
9Q32-0836
9Q32-0840
9Q32-0844
9Q32-0848
9Q32-0856
9Q32-0864
9Q32-0872
9Q32-0880
D
Dia.
L
Length
.1252
.1252
.1877
.1877
.1877
.1877
.1877
.1877
.1877
.1877
.1877
.2502
.2502
.2502
.2502
.2502
.2502
.2502
.2502
.2502
.2502
.2502
.2502
.2502
1.750
2.000
.500
.750
.875
1.000
1.125
1.375
1.500
1.750
2.000
.500
.625
.750
.875
1.000
1.125
1.250
1.375
1.500
1.750
2.000
2.250
2.500
.0001
.012
STAINLESS STEEL ROLL PINS

MATERIAL:
420 Stainless Steel, Rc 43-52
SPECIFICATION:
Inch
T
1
A
D
CHAMFER
BOTH ENDS
A
Nominal
Wall
Diameter Thickness
1/16
3/32
1/8
5/32
3/16
.012
.022
.028
.032
.042
Recommended
Hole Size
D Dia.
Min.
.066
.099
.131
.162
.194
Max.
.069
.103
.135
.167
.199
Min.
.062
.094
.125
.156
.187
Max.
.065
.097
.129
.160
.192
6
7
INCH COMPONENT
CATALOG NUMBER
A 9Y351/16
Nominal Diameter
3/32
1/8
5/32
3/16
Diameter Code
02
02
02
02
02
02
02
02
02
02
02
02
02
02
03
03
03
03
03
03
03
03
03
03
03
03
03
03
03
03
03
04
04
04
04
04
04
04
04
04
04
04
04
04
04
04
04
05
05
05
05
05
05
05
05
05
05
05
05
05
05
06
06
06
06
06
06
06
06
06
06
06
06
06
L
L
Length
Length Length
Tolerance
Code
06
08
10
12
14
16
18
20
22
24
26
28
30
32
36
40
44
48
.188
.250
.312
.375
.437
.500
.562
.625
.687
.750
.812
.875
.937
1.000
1.125
1.250
1.375
1.500
.015
.015
.015
.015
.015
.015
.015
.015
.015
.015
.015
.015
.015
.015
.020
.020
.020
.020
10
11
12
13
14
15
10-73
16
CARBON STEEL ROLL PINS

MATERIAL:
Carbon Spring Steel
SPECIFICATION:
Inch
0
L
A
B
5
6
7
A
Nominal
Wall
Diameter Thickness
1/16
3/32
1/8
5/32
3/16
10
11
12
13
Nominal Diameter
1/16
3/32
02
02
02
02
02
02
02
02
02
02
03
03
03
03
03
03
03
03
03
03
03
03
03
03
03
1/8
5/32
3/16
Diameter Code
14
15
16
Min.
.007
.008
.008
.010
.011
.059
.091
.122
.151
.182
Max.
.028
.038
.044
.048
.055
INCH COMPONENT
CATALOG NUMBER
A 9C35-
8
9
.012
.022
.028
.032
.042
C
Chamfer
B
Dia.
Max.
10-74
04
04
04
04
04
04
04
04
04
04
04
04
04
04
04
04
05
05
05
05
05
05
05
05
05
05
05
05
05
05
06
06
06
06
06
06
06
06
06
06
06
06
06
L
L
Length Length
Code
06
08
10
12
14
16
18
20
22
24
26
28
30
32
36
40
44
48
CHAMFER
BOTH ENDS
3
4
.188
.250
.312
.375
.438
.500
.562
.625
.688
.750
.812
.875
.938
1.000
1.125
1.250
1.375
1.500
D
Dia.
Min.
.066
.099
.131
.162
.194
Recommended
Hole Size
Max.
.069
.103
.135
.167
.199
Min.
.062
.094
.125
.156
.187
Max.
.065
.097
.129
.160
.192
STAINLESS STEEL SPIROL PINS

STANDARD DUTY
MATERIAL:
302 Stainless Steel
Inch
SPECIFICATION:
Shaft Size 3/32

S7220Y-03304
S7220Y-03306
S7220Y-03308
S7220Y-03310
S7220Y-03312
Shaft Size 1/8
S7220Y-04106
S7220Y-04108
S7220Y-04110
S7220Y-04112
S7220Y-04114
S7220Y-04116
S7220Y-04906
S7220Y-04908
S7220Y-04910
S7220Y-04912
S7220Y-04914
S7220Y-04916
S7220Y-05406
S7220Y-05408
S7220Y-05410
S7220Y-05412
S7220Y-05414
S7220Y-05416
Shaft Size 3/16
S7220Y-06708
S7220Y-06710
S7220Y-06712
S7220Y-06714
S7220Y-06716
S7220Y-06718
S7220Y-06720
Shaft Size 1/4 & 5/16
S7220Y-09912
S7220Y-09914
S7220Y-09916
S7220Y-09918
S7220Y-09920
S7220Y-09922
Shaft Size 3/8, 7/16 & 1/2
S7220Y-13112
S7220Y-13114
S7220Y-13116
S7220Y-13118
S7220Y-13120
S7220Y-13122
S7220Y-13124
S7220Y-13128
S7220Y-13132
1
Precision
Component
T
1
O.D. EXPANDED DIAMETER
INCH COMPONENT
Catalog Number
SWAGED
CHAMFER
Drill
Size
Drill
Size
Tolerance
1/8
3/16
1/4
5/16
3/8
.031
.031
.031
.031
.031
+.001/-.000
+.001/-.000
+.001/-.000
+.001/-.000
+.001/-.000
+.003/-.000
+.003/-.000
+.003/-.000
+.003/-.000
+.003/-.000
+.003/-.000
+.003/-.000
+.003/-.000
+.003/-.000
+.003/-.000
+.003/-.000
+.003/-.000
+.003/-.000
+.003/-.000
+.003/-.000
+.003/-.000
+.003/-.000
+.003/-.000
3/16
1/4
5/16
3/8
7/16
1/2
3/16
1/4
5/16
3/8
7/16
1/2
3/16
1/4
5/16
3/8
7/16
1/2
.039
.039
.039
.039
.039
.039
.047
.047
.047
.047
.047
.047
.052
.052
.052
.052
.052
.052
+.001/-.000
+.001/-.000
+.001/-.000
+.001/-.000
+.001/-.000
+.001/-.000
.001
.001
.001
.001
.001
.001
.001
.001
.001
.001
.001
.001
.067
.067
.067
.067
.067
.067
.067
+.005/-.000
+.005/-.000
+.005/-.000
+.005/-.000
+.005/-.000
+.005/-.000
+.005/-.000
1/4
5/16
3/8
7/16
1/2
9/16
5/8
.062
.062
.062
.062
.062
.062
.062
+.003/-.001
+.003/-.001
+.003/-.001
+.003/-.001
+.003/-.001
+.003/-.001
+.003/-.001
.099
.099
.099
.099
.099
.099
+.006/-.000
+.006/-.000
+.006/-.000
+.006/-.000
+.006/-.000
+.006/-.000
3/8
7/16
1/2
9/16
5/8
11/16
.094
.094
.094
.094
.094
.094
+.003/-.001
+.003/-.001
+.003/-.001
+.003/-.001
+.003/-.001
+.003/-.001
.131
.131
.131
.131
.131
.131
.131
.131
.131
+.007/-.000
+.007/-.000
+.007/-.000
+.007/-.000
+.007/-.000
+.007/-.000
+.007/-.000
+.007/-.000
+.007/-.000
3/8
7/16
1/2
9/16
5/8
11/16
3/4
7/8
1
.125
.125
.125
.125
.125
.125
.125
.125
.125
+.004/-.001
+.004/-.001
+.004/-.001
+.004/-.001
+.004/-.001
+.004/-.001
+.004/-.001
+.004/-.001
+.004/-.001
O.D.
O.D.
Tolerance
.033
.033
.033
.033
.033
+.002/-.000
+.002/-.000
+.002/-.000
+.002/-.000
+.002/-.000
.041
.041
.041
.041
.041
.041
.049
.049
.049
.049
.049
.049
.054
.054
.054
.054
.054
.054
L
Length
.01
10-75
4
5
6
7
8
9
10
11
12
13
14
15
16
SPIROL PINS
MEDIUM-DUTY
MATERIAL:
Carbon Steel (Hardened),

Rc Scale 46-53, Oiled Finish
Inch
SPECIFICATION:
5 - 15 CHAMFER
Other lengths and diameters

3
INCH COMPONENT
Catalog Number
*A
*A
*A
*A
*A
*A
*A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
9Q36-0104
9Q36-0106
9Q36-0108
9Q36-0110
9Q36-0112
9Q36-0114
9Q36-0116
9Q36-0206
9Q36-0208
9Q36-0210
9Q36-0212
9Q36-0214
9Q36-0216
9Q36-0220
9Q36-0222
9Q36-0224
9Q36-0228
9Q36-0230
9Q36-0232
9Q36-0308
9Q36-0310
9Q36-0312
9Q36-0314
9Q36-0316
9Q36-0318
9Q36-0320
9Q36-0322
9Q36-0324
9Q36-0326
9Q36-0328
9Q36-0330
9Q36-0332
9Q36-0336
9Q36-0340
D
Expanded L
Length
Dia.
Min.
.033
.033
.033
.033
.033
.033
.033
.067
.067
.067
.067
.067
.067
.067
.067
.067
.067
.067
.067
.099
.099
.099
.099
.099
.099
.099
.099
.099
.099
.099
.099
.099
.099
.099
Max.
.035
.035
.035
.035
.035
.035
.035
.072
.072
.072
.072
.072
.072
.072
.072
.072
.072
.072
.072
.105
.105
.105
.105
.105
.105
.105
.105
.105
.105
.105
.105
.105
.105
.105
.01
.125
.188
.250
.312
.375
.438
.500
.188
.250
.312
.375
.438
.500
.625
.688
.750
.875
.938
1.000
.250
.312
.375
.438
.500
.562
.625
.688
.750
.812
.875
.938
1.000
1.125
1.250
Drill
Size
Min.
.031
.031
.031
.031
.031
.031
.031
.061
.061
.061
.061
.061
.061
.061
.061
.061
.061
.061
.061
.093
.093
.093
.093
.093
.093
.093
.093
.093
.093
.093
.093
.093
.093
.093
Max.
.032
.032
.032
.032
.032
.032
.032
.065
.065
.065
.065
.065
.065
.065
.065
.065
.065
.065
.065
.097
.097
.097
.097
.097
.097
.097
.097
.097
.097
.097
.097
.097
.097
.097
Catalog Number
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
9Q36-0410
9Q36-0412
9Q36-0416
9Q36-0418
9Q36-0420
9Q36-0422
9Q36-0424
9Q36-0426
9Q36-0428
9Q36-0430
9Q36-0432
9Q36-0436
9Q36-0440
9Q36-0444
9Q36-0448
9Q36-0514
9Q36-0516
9Q36-0524
9Q36-0528
9Q36-0532
9Q36-0536
9Q36-0540
9Q36-0544
9Q36-0548
9Q36-0616
9Q36-0618
9Q36-0620
9Q36-0622
9Q36-0624
9Q36-0630
9Q36-0632
9Q36-0636
9Q36-0640
9Q36-0648
D
Expanded L
Length
Dia.
Min.
.131
.131
.131
.131
.131
.131
.131
.131
.131
.131
.131
.131
.131
.131
.131
.163
.163
.163
.163
.163
.163
.163
.163
.163
.196
.196
.196
.196
.196
.196
.196
.196
.196
.196
Max.
.138
.138
.138
.138
.138
.138
.138
.138
.138
.138
.138
.138
.138
.138
.138
.171
.171
.171
.171
.171
.171
.171
.171
.171
.205
.205
.205
.205
.205
.205
.205
.205
.205
.205
.01
.312
.375
.500
.562
.625
.688
.750
.812
.875
.938
1.000
1.125
1.250
1.375
1.500
.438
.500
.750
.875
1.000
1.125
1.250
1.375
1.500
.500
.562
.625
.688
.750
.938
1.000
1.125
1.250
1.500
Drill
Size
Min.
.124
.124
.124
.124
.124
.124
.124
.124
.124
.124
.124
.124
.124
.124
.124
.155
.155
.155
.155
.155
.155
.155
.155
.155
.185
.185
.185
.185
.185
.185
.185
.185
.185
.185
Max.
.129
.129
.129
.129
.129
.129
.129
.129
.129
.129
.129
.129
.129
.129
.129
.160
.160
.160
.160
.160
.160
.160
.160
.160
.192
.192
.192
.192
.192
.192
.192
.192
.192
.192
4
5
6
7
8
9
10
11
12
13
14
* Made of 420 Stainless Steel - Rc 46-55.
15
10-76
REV: 07.03.12 mh
16
STAINLESS STEEL GROOVE PINS

MATERIAL:
303 Stainless Steel
SPECIFICATION:
Inch
1
Precision
Component
T
1
L/2
Dx
3
INCH COMPONENT
Catalog Number
D
Dia.
D
Tolerance
Dx
Expanded
Dia.
Dx
Tolerance
S7210Y-04712
S7210Y-04716
S7210Y-04720
S7210Y-06212
S7210Y-06216
S7210Y-06220
S7210Y-07812
S7210Y-07816
S7210Y-07820
S7210Y-09412
S7210Y-09416
S7210Y-09420
S7210Y-09424
S7210Y-12516
S7210Y-12520
S7210Y-12524
S7210Y-12532
S7210Y-15616
S7210Y-15620
S7210Y-15624
S7210Y-15632
.0469
.0469
.0469
.0625
.0625
.0625
.0781
.0781
.0781
.0938
.0938
.0938
.0938
.1250
.1250
.1250
.1250
.1563
.1563
.1563
.1563
+.0000/-.0015
+.0000/-.0015
+.0000/-.0015
+.0000/-.0015
+.0000/-.0015
+.0000/-.0015
+.0000/-.0015
+.0000/-.0015
+.0000/-.0015
+.0000/-.0015
+.0000/-.0015
+.0000/-.0015
+.0000/-.0015
+.0000/-.0020
+.0000/-.0020
+.0000/-.0020
+.0000/-.0020
+.0000/-.0020
+.0000/-.0020
+.0000/-.0020
+.0000/-.0020
.050
.050
.050
.066
.066
.066
.082
.082
.082
.099
.099
.099
.099
.132
.132
.132
.132
.164
.164
.164
.164
.0015
.0015
.0015
.0015
.0015
.0015
.0015
.0015
.0015
.0020
.0020
.0020
.0020
.0025
.0025
.0025
.0025
.0025
.0025
.0025
.0025
L
Length
.010
.385
1/2
5/8
3/8
1/2
5/8
3/8
1/2
5/8
3/8
1/2
5/8
3/4
1/2
5/8
3/4
1
1/2
5/8
3/4
1
Drill
Size
3/64
3/64
3/64
1/16
1/16
1/16
5/64
5/64
5/64
3/32
3/32
3/32
3/32
1/8
1/8
1/8
1/8
5/32
5/32
5/32
5/32
4
5
6
7
8
9
10
11
12
13
14
15
10-77
16
CARBON STEEL GROOVE PINS

MATERIAL:
SPECIFICATION:
SEE NOTE
Inch
1
L
Dx
L/2
D
3
Tapered Groove Pin
(3 tapered grooves extending half the length of the pin)
NOTE: The tapered groove pin style shown above will be replaced by a
parallel groove type when present stock is depleted.
L
Dx
7
8
9
10
11
12
13
14
15
16
35 .5
Parallel Groove Pin

(3 parallel grooves extending half the length of the pin)
INCH COMPONENT
D
Dia.
Catalog Number
*A
A
A
A
A
A
A
A
*A
A
A
A
A
A
A
A
*A
*A
*A
*A
9C37-0208
9C37-0212
9C37-0216
9C37-0220
9C37-0224
9C37-0228
9C37-0232
9C37-0308
9C37-0312
9C37-0316
9C37-0324
9C37-0412
9C37-0416
9C37-0428
9C37-0432
9C37-0440
9C37-0528
9C37-0612
9C37-0624
9C37-0664
Dx Expanded Dia.
Min.
Max.
Min.
Max.
.01
.061
.061
.061
.061
.061
.061
.061
.093
.093
.093
.093
.123
.123
.123
.123
.123
.154
.180
.180
.180
.062
.062
.062
.062
.062
.062
.062
.094
.094
.094
.094
.125
.125
.125
.125
.125
.156
.188
.188
.188
.067
.067
.067
.067
.067
.067
.067
.100
.100
.100
.100
.132
.132
.132
.132
.132
.164
.196
.196
.196
.069
.069
.069
.069
.069
.069
.069
.102
.102
.102
.102
.136
.136
.136
.136
.136
.168
.200
.200
.200
.250
.375
.500
.625
.750
.875
1.000
.250
.375
.500
.750
.375
.500
.875
1.000
1.250
.875
.375
.750
2.000
* To be discontinued when the present stock is depleted.
10-78
L
Length
P
Ref.
C
Chamfer
Length
Min.
1/32
1/32
1/32
1/32
1/32
1/32
1/32
1/32
1/32
1/32
1/32
1/32
1/32
1/32
1/32
1/32
1/16
1/16
1/16
1/16
.005
.005
.005
.005
.005
.005
.005
.005
.005
.005
.005
.005
.005
.005
.005
.005
.005
.016
.016
.016
STAINLESS STEEL TAPER PINS

MATERIAL:
303 Stainless Steel
SPECIFICATION:
Inch
Different pin sizes and lengths

1
Precision
Component
T
1
2
3
+.0013
D -.0007
TAPER 1/4 in. PER FOOT
INCH COMPONENT
Catalog Number
Shaft
Size
Pin
Size
D
Dia.
S7250Y-9008
S7250Y-9012
S7250Y-8008
S7250Y-8012
S7250Y-8016
S7250Y-7014
S7250Y-7016
S7250Y-7018
S7250Y-7020
S7250Y-6014
S7250Y-6018
S7250Y-6020
S7250Y-6024
S7250Y-5016
S7250Y-5018
S7250Y-5028
S7250Y-4020
S7250Y-4024
S7250Y-4028
S7250Y-4032
S7250Y-3020
S7250Y-3024
S7250Y-3028
S7250Y-3032
S7250Y-2024
S7250Y-2028
S7250Y-2032
S7250Y-2040
3/32
3/32
1/8
1/8
1/8
3/16
3/16
3/16
3/16
7/32
7/32
7/32
7/32
1/4
1/4
1/4
5/16
5/16
5/16
5/16
3/8
3/8
3/8
3/8
7/16
7/16
7/16
7/16
9/0
9/0
8/0
8/0
8/0
7/0
7/0
7/0
7/0
6/0
6/0
6/0
6/0
5/0
5/0
5/0
4/0
4/0
4/0
4/0
3/0
3/0
3/0
3/0
2/0
2/0
2/0
2/0
.0310
.0310
.0470
.0470
.0470
.0625
.0625
.0625
.0625
.0780
.0780
.0780
.0780
.0940
.0940
.0940
.1090
.1090
.1090
.1090
.1250
.1250
.1250
.1250
.1410
.1410
.1410
.1410
L
Length
.03
1/4
3/8
1/4
3/8
1/2
7/16
1/2
9/16
5/8
7/16
9/16
5/8
3/4
1/2
9/16
7/8
5/8
3/4
7/8
1
5/8
3/4
7/8
1
3/4
7/8
1
1-1/4
NOTE: To find small diameter of pin, multiply the length by .02083 and subtract the result from the large diameter.
6
7
8
9
10
11
12
13
14
15
10-79
16
CARBON STEEL TAPER PINS

MATERIAL:
Carbon Steel (Unhardened)
SPECIFICATION:
Inch
2
3
INCH COMPONENT
4
5
6
7
8
9
10
11
12
13
14
15
16
SPHERICAL RADIUS BOTH

ENDS APPROX. EQUAL TO D
1/16
GAGE DIA.
Catalog Number
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
*A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
9C38-7014
9C38-7016
9C38-6010
9C38-6012
9C38-6016
9C38-6020
9C38-5008
9C38-5012
9C38-5014
9C38-5016
9C38-5018
9C38-5020
9C38-5022
9C38-5024
9C38-5028
9C38-5030
9C38-5032
9C38-4012
9C38-4016
9C38-4020
9C38-4024
9C38-4028
9C38-4030
9C38-4032
9C38-3016
9C38-3018
9C38-3020
9C38-3024
9C38-3030
9C38-3032
9C38-2020
9C38-2022
9C38-2024
9C38-2028
9C38-2032
9C38-0016
9C38-0020
9C38-0024
9C38-0028
9C38-0032
* This item is hardened.
10-80
TAPER = .250 .006 PER FOOT

OR .0208 .0005 PER INCH
Taper
Pin
No.
D
Dia.
7/0
7/0
6/0
6/0
6/0
6/0
5/0
5/0
5/0
5/0
5/0
5/0
5/0
5/0
5/0
5/0
5/0
4/0
4/0
4/0
4/0
4/0
4/0
4/0
3/0
3/0
3/0
3/0
3/0
3/0
2/0
2/0
2/0
2/0
2/0
0
0
0
0
0
.062
.062
.078
.078
.078
.078
.094
.094
.094
.094
.094
.094
.094
.094
.094
.094
.094
.109
.109
.109
.109
.109
.109
.109
.125
.125
.125
.125
.125
.125
.141
.141
.141
.141
.141
.156
.156
.156
.156
.156
CORNERS ROUNDED
BOTH ENDS
Gage
Dia.
+.001
-.000
.0615
.0615
.0770
.0770
.0770
.0770
.0929
.0929
.0929
.0929
.0929
.0929
.0929
.0929
.0929
.0929
.0929
.1079
.1079
.1079
.1079
.1079
.1079
.1079
.1238
.1238
.1238
.1238
.1238
.1238
.1398
.1398
.1398
.1398
.1398
.1548
.1548
.1548
.1548
.1548
L
Length
.01
.438
.500
.312
.375
.500
.625
.250
.375
.438
.500
.562
.625
.688
.750
.875
.938
1.000
.375
.500
.625
.750
.875
.938
1.000
.500
.562
.625
.750
.938
1.000
.625
.688
.750
.875
1.000
.500
.625
.750
.875
1.000
COTTER PINS
EXTENDED PRONG
CHISEL POINT
R
Inch
MATERIAL:
Steel, Zinc Plated
SPECIFICATION:
Discounts available for

L
O.D.
3
INCH COMPONENT
D Dia.
Catalog Number
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
9C33-0104
9C33-0108
9C33-0112
9C33-0116
9C33-0120
9C33-0204
9C33-0208
9C33-0212
9C33-0224
9C33-0228
9C33-0232
9C33-0312
9C33-0324
9C33-0328
9C33-0332
9C33-0340
9C33-0348
9C33-0408
9C33-0412
9C33-0416
9C33-0420
9C33-0424
9C33-0428
9C33-0432
9C33-0436
9C33-0448
Nom.
Tol.
1/32
1/32
1/32
1/32
1/32
1/16
1/16
1/16
1/16
1/16
1/16
3/32
3/32
3/32
3/32
3/32
3/32
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
.032/.028
.032/.028
.032/.028
.032/.028
.032/.028
.060/.056
.060/.056
.060/.056
.060/.056
.060/.056
.060/.056
.090/.086
.090/.086
.090/.086
.090/.086
.090/.086
.090/.086
.120/.116
.120/.116
.120/.116
.120/.116
.120/.116
.120/.116
.120/.116
.120/.116
.120/.116
O.D.
Min.
L
Length
Drill
Hole
Size
.06
.06
.06
.06
.06
.12
.12
.12
.12
.12
.12
.19
.19
.19
.19
.19
.19
.25
.25
.25
.25
.25
.25
.25
.25
.25
1/4
1/2
3/4
1
1-1/4
1/4
1/2
3/4
1-1/2
1-3/4
2
3/4
1-1/2
1-3/4
2
2-1/2
3
1/2
3/4
1
1-1/4
1-1/2
1-3/4
2
2-1/4
3
.047
.047
.047
.047
.047
.078
.078
.078
.078
.078
.078
.109
.109
.109
.109
.109
.109
.141
.141
.141
.141
.141
.141
.141
.141
.141
4
5
6
7
8
9
10
11
12
13
14
15
10-81
16
HITCH PINS
INTERNAL
MATERIAL:
Spring Wire, Oil-Tempered, Plated
Inch
SPECIFICATION:
1
2
3
4
INCH COMPONENT
Catalog Number
5
6
7
A
A
A
A
A
A
A
A
A
9Q34-23
9Q34-21
9Q34-22
9Q34-18
9Q34-13
9Q34-17
9Q34-03
9Q34-07
9Q34-14
Recommended
Shaft Dia.
D
Dia.
Drill
Size
Hole
Min.
.042
.047
.062
.062
.080
.080
.093
.093
.093
3/64
1/16
5/64
5/64
3/32
3/32
7/64
7/64
7/64
3/16
1/8
1/4
3/8
1/4
3/8
1/4
1/4
3/8
Max.
E
Inside
Dia. of Eye
L
Length
1/4
3/16
1/2
1/2
3/8
1/2
1/2
5/8
3/4
1/4
1/8
5/16
5/16
1/4
5/16
3/8
5/8
7/16
1
19/32
1-5/16
1-9/16
1-3/16
1-9/16
1-5/8
2-5/16
2-1/2
L
Length
15/32
1
11/16
7/8
8
EXTERNAL
MATERIAL:
10
SPECIFICATION:
11
Spring Wire, Oil-Tempered, Plated

Other materials available
on special order.
12
13
14
15
16
INCH COMPONENT
Catalog Number
A
A
A
A
9Q34-X1
9Q34-X2
9Q34-X3
9Q34-X4
10-82
D
Dia.
.032
.062
.062
.047
Recommended Groove
Dimensions
Dia.
Width
E
Inside
Dia. of Eye
5/32
3/8
1/4
1/4
3/64
5/64
5/64
1/16
1/8
5/16
3/16
3/16
PRECISION DISC DIALS

CLOCKWISE
PRECISION LASER ENGRAVED
R
Inch
MATERIAL:
2024 Aluminum, Black Hard Anodized
MODIFICATION:
Assembled with hubs upon request at

nominal charge.
T
1
See index for hubs
2
3
.062
4
O.D.
.3750 +.0000
-.0003
5
6
INCH COMPONENT
Catalog Number
+.000
-.003
O.D.
No. of
Graduations
Steps in
Degrees
Dial
Range
S1228Y-GA-02
S1228Y-GA-04
S1228Y-GA-05
S1228Y-GA-06
S1228Y-GA-07
S1228Y-GA-10
S1228Y-GA-11
S1228Y-GA-12
S1228Y-GA-13
S1228Y-GA-14
S1228Y-GA-15
S1228Y-GA-16
S1228Y-GA-17
S1228Y-GA-18
S1228Y-GA-19
S1228Y-GA-20
S1228Y-GA-21
S1228Y-GA-22
S1228Y-GA-23
S1228Y-GA-24
S1228Y-GA-25
S1228Y-GA-26
S1228Y-GA-27
S1228Y-GA-29
S1228Y-GA-30
S1228Y-GA-31
S1228Y-GA-32
S1228Y-GA-33
S1228Y-GA-34
1.500
1.500
1.500
1.500
1.500
2.000
2.000
2.000
2.000
2.000
2.000
2.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
4.000
4.000
4.000
4.000
4.000
4.000
4.000
180
60
50
25
10
120
100
72
60
50
25
10
BLANK
360
180
200
180
120
100
72
50
10
BLANK
180
200
180
100
50
10
2
6
712'
1424'
36
3
336'
5
6
712'
1424'
36
1
2
148'
2
3
336'
5
712'
36
2
148'
2
336'
712'
36
0 ... 360
0 ... 60
0 ... 50
0 ... 25
0 ... 10
0 ... 120
0 ... 100
0 ... 72
0 ... 60
0 ... 50
0 ... 25
0 ... 10
0 ... 360
0 ... 360
0 ... 200
0 ... 180
0 ... 120
0 ... 100
0 ... 72
0 ... 50
0 ... 10
0 ... 360
0 ... 200
0 ... 180
0 ... 100
0 ... 50
0 ... 10
10-83
7
8
9
10
11
12
13
14
15
16
PRECISION DRUM & DISC DIALS

PRECISION DRUM DIALS
COUNTERCLOCKWISE
MATERIAL:
MODIFICATION:
See index for hubs
Inch
Assembled with hubs upon request

at nominal charge.
.3750 +.0000
-.0003
O.D.
3
.062
A
4
5
6
7
INCH COMPONENT
Catalog Number
S5189Y-GD-2
S5189Y-GD-3
S5189Y-GD-4
.500
.500
.500
.005
O.D.
No. of
Graduations
Steps in
Degrees
Dial
Range
2.990
2.490
2.490
180
360
180
2
1
2
0 ... 360
0 ... 360
0 ... 360
8
.062
PRECISION DISC DIALS
9
10
11
12
13
14
15
16
+.0000
COUNTERCLOCKWISE
.3750 -.0003
D
MATERIAL:
MODIFICATION:

at nominal charge.
See index for hubs
INCH COMPONENT
Catalog Number
+.000
-.003
O.D.
No. of
Graduations
Steps in
Degrees
Dial
Range
S1228Y-GC-1
S1228Y-GC-2
S1228Y-GC-3
S1228Y-GC-4
S1228Y-GC-5
3.000
3.000
3.000
4.000
4.000
360
180
100
360
180
1
2
336'
1
2
0 ... 360
0 ... 360
0 ... 100
0 ... 360
0 ... 360
10-84
PRECISION DRUM DIALS

CLOCKWISE
R
Inch
MATERIAL:
MODIFICATION:

at nominal charge.
T
1
See index for hubs
2
3
4
A
.3750 +.0000
-.0003
5
.062
O.D.
7
8
INCH COMPONENT
Catalog Number
S5189Y-GB-01
S5189Y-GB-02
S5189Y-GB-04
S5189Y-GB-05
S5189Y-GB-06
S5189Y-GB-07
S5189Y-GB-08
S5189Y-GB-09
S5189Y-GB-10
S5189Y-GB-11
S5189Y-GB-12
S5189Y-GB-13
S5189Y-GB-14
S5189Y-GB-15
S5189Y-GB-16
S5189Y-GB-18
S5189Y-GB-19
S5189Y-GB-20
S5189Y-GB-21
S5189Y-GB-22
S5189Y-GB-23
S5189Y-GB-24
S5189Y-GB-25
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
.005
O.D.
No. of
Graduations
Steps in
Degrees
Dial
Range
.990
.990
.990
1.490
1.490
1.490
1.990
1.990
1.990
1.990
1.990
1.990
2.490
2.490
2.490
2.490
2.490
2.490
2.990
2.990
2.990
2.990
2.990
100
60
100
180
50
25
10
180
180
200
180
360
100
180
100
10
360
180
336'
6
336'
2
712'
1424'
36
2
2
148'
2
1
336'
2
336'
36
1
2
BLANK
0 ... 100
BLANK
0 ... 60
0 ... 100
0 ... 360
BLANK
0 ... 50
0 ... 25
0 ... 10
0 ... 180
0 ... 360
BLANK
0 ... 200
0 ... 180
0 ... 360
0 ... 100
BLANK
0 ... 180
0 ... 100
0 ... 10
0 ... 360
0 ... 360
10-85
9
10
11
12
13
14
15
16
VERNIER AND DRUM OR DISC DIAL SETS

VERNIER AND DRUM DIAL SETS
R
T
1
Inch
MATERIAL:
Other sets available on request.

Assembled with hubs, upon request,
at nominal charge.
See index for hubs
O.D.
.500
1/32
.500
4
5
VERNIER
.3750 +.0000
-.0003
Catalog Number
S9922Y-GJ-1
S9922Y-GJ-2
S9922Y-GJ-3
S9922Y-GJ-4
.250
90
2 HOLES
.1285
1/32
DIAL
INCH COMPONENT
1/16
.3750
O.D.
.005
1.490
1.990
2.490
2.990
No. of
Graduations
Steps in
Degrees
Dial
Range
Vernier
Reading
.375
.375
.500
.500
180
180
360
360
2
2
1
1
0 ... 360
0 ... 360
0 ... 360
0 ... 360
12 arc min.
12 arc min.
6 arc min.
6 arc min.
VERNIER AND DISC DIAL SETS

MATERIAL:
10
11
Other sets available on request.

Assembled with hubs, upon request,
at nominal charge.
1/16
TYPICAL
HUB
INCH COMPONENT
16
.250
O.D.
13
15
VERNIER
See index for hubs
12
14
W
DIAL
Catalog Number
S9909Y-GH-1
S9909Y-GH-2
S9909Y-GH-4
10-86
O.D.
.005
1.500
2.000
4.000
.500 1.000
3/16
.3750 +.0000
-.0003
2 HOLES
.1285
No. of
Graduations
Steps in
Degrees
Dial
Range
Vernier
Reading
1.760
2.010
3.010
180
180
360
2
2
1
0 ... 360
0 ... 360
0 ... 360
12 arc min.
12 arc min.
6 arc min.
PRECISION INDEXES
PRECISION INDEX

Inch
MATERIAL:
GE-1 - Clear Plexiglass

GE-2 - 2024 Aluminum, Black Anodized
.500
.187
Catalog Number
RATE
.866
S6900Y-GE-1
S6900Y-GE-2
2 HOLES
.1285
ENGRAVING
ON REQUEST
PRECISION DRUM DIAL INDEX

MATERIAL:
Use with S5189Y-GB and

GD Series Drum Dials.
O.D.
.500
1/32
.500
.3750
.250
1/32
90
2 HOLES
.1285
INCH COMPONENT
Catalog Number
O.D. of Drum
S6900Y-GF-1
S6900Y-GF-2
S6900Y-GF-3
S6900Y-GF-4
.375
.375
.500
.500
1.490
1.990
2.490
2.990

10
PRECISION DISC DIAL INDEX
MATERIAL:
11
.500
.250
O.D.
1.000
Use with S1228Y-GA and

GC Series Disc Dials.
2 HOLES
.1285
INCH COMPONENT
12
3/16
13
Catalog Number
O.D. of Drum
S6900Y-GG-1
S6900Y-GG-2
S6900Y-GG-3
S6900Y-GG-4
1.760
2.010
2.510
3.010
1.500
2.000
3.000
4.000
14
15
10-87
REV: 8.23.12 mh
T
1
1.00
.062
INCH COMPONENT
16
I
R
SPRING POSTS
GROOVE PIN (TYPE G)
1/8 TO 1/4 DIAMETER
MATERIAL:
Inch
SPECIFICATION:
1
A/2 RADIUS
3 GROOVES
L/2
A
L
5
6
7
8
9
10
11
12
13
14
INCH COMPONENT
Catalog Number
D
Dia.
L
Length
E
Dia.
Crown
Radius
S7270Y-12512
S7270Y-12516
S7270Y-12520
S7270Y-12524
*S7270Y-12528
S7270Y-12532
*S7270Y-12540
S7270Y-18712
S7270Y-18716
S7270Y-18720
S7270Y-18724
S7270Y-18728
S7270Y-18732
*S7270Y-18740
S7270Y-25016
S7270Y-25020
S7270Y-25024
S7270Y-25028
*S7270Y-25032
S7270Y-25040
1/8
1/8
1/8
1/8
1/8
1/8
1/8
3/16
3/16
3/16
3/16
3/16
3/16
3/16
1/4
1/4
1/4
1/4
1/4
1/4
3/8
1/2
5/8
3/4
7/8
1
1-1/4
3/8
1/2
5/8
3/4
7/8
1
1-1/4
1/2
5/8
3/4
7/8
1
1-1/4
.064
.064
.064
.064
.064
.064
.064
.064
.064
.064
.064
.064
.064
.064
.096
.096
.096
.096
.096
.096
.083
.083
.083
.083
.083
.083
.083
.125
.125
.125
.125
.125
.125
.125
.167
.167
.167
.167
.167
.167
1/32
1/32
1/32
1/32
1/32
1/32
1/32
3/64
3/64
3/64
3/64
3/64
3/64
3/64
1/16
1/16
1/16
1/16
1/16
1/16
5/32
5/32
5/32
5/32
5/32
5/32
5/32
1/4
1/4
1/4
1/4
1/4
1/4
1/4
5/16
5/16
5/16
5/16
5/16
5/16
15
16
10-88
Crown
Height
.013
.013
.013
.013
.013
.013
.013
.019
.019
.019
.019
.019
.019
.019
.026
.026
.026
.026
.026
.026
EXTENSION SPRINGS
CROSSOVER LOOPS OR MACHINE LOOPS
CLOSE WOUND
UNIFORM BODY DIAMETER
R
Inch
MATERIAL:
302 Stainless Steel, Spring Temper
Supplied right- or left-hand wound at our option.

Loop orientation may vary.
T
1
2
3
SUPPLIED WITH OPEN OR CLOSED

LOOP AT OUR OPTION
O.D.
5
6
INCH COMPONENT
Catalog Number
O.D.
Wire
Dia.
L
Free
Length
L1
Ext.
Length
Load
at L1
lbf
Spring
Rate
lbf/in.
S78ESY-006008025
S78ESY-006008038
S78ESY-006008050
S78ESY-009010038
S78ESY-009010075
S78ESY-009012044
S78ESY-009012050
S78ESY-009013038
S78ESY-009013044
S78ESY-012016075
S78ESY-012016125
S78ESY-012016137
S78ESY-012018088
S78ESY-012018100
S78ESY-012020050
S78ESY-012020075
S78ESY-012020125
S78ESY-018022075
S78ESY-018022088
S78ESY-018022125
S78ESY-018026075
S78ESY-018026125
S78ESY-018031062
S78ESY-018031075
S78ESY-018031125
S78ESY-018034062
.063
.063
.063
.094
.094
.094
.094
.094
.094
.120
.120
.120
.120
.120
.120
.120
.120
.180
.180
.180
.180
.180
.180
.180
.180
.180
.008
.008
.008
.010
.010
.012
.012
.013
.013
.016
.016
.016
.018
.018
.020
.020
.020
.022
.022
.022
.026
.026
.031
.031
.031
.034
.25
.38
.50
.38
.75
.44
.50
.38
.44
.75
1.25
1.37
.88
1.00
.50
.75
1.25
.75
.88
1.25
.75
1.25
.62
.75
1.25
.62
.46
.75
1.05
.84
2.00
.82
.95
.60
.73
1.34
2.31
2.57
1.42
1.60
.68
1.08
1.84
1.31
1.61
2.43
1.12
2.01
.79
.98
1.72
.75
.37
.37
.37
.50
.50
.83
.83
.96
.96
1.33
1.33
1.33
1.83
1.83
2.50
2.50
2.50
2.17
2.17
2.17
3.50
3.50
5.66
5.66
5.66
7.47
1.7
.9
.6
1.0
.3
2.0
1.7
3.8
3.0
2.1
1.1
.9
3.2
2.7
12.6
6.9
3.7
3.7
2.8
1.7
8.8
4.2
31.5
22.6
10.9
51.5
7
8
9
10
11
12
13
14
15
10-89
16
I
R
T
1
EXTENSION SPRINGS
CROSSOVER LOOPS OR MACHINE LOOPS
CLOSE WOUND
UNIFORM BODY DIAMETER
Inch
MATERIAL:
Supplied right- or left-hand wound at our option.

Loop orientation may vary.
SUPPLIED WITH OPEN OR CLOSED

LOOP AT OUR OPTION
O.D.
INCH COMPONENT
5
6
7
8
9
10
11
12
Catalog Number
O.D.
Wire
Dia.
L
Free
Length
L1
Ext.
Length
Load
at L1
lbf
Spring
Rate
lbf/in.
S78ESY-024026075
S78ESY-024026100
S78ESY-024026112
S78ESY-024026125
S78ESY-024029075
S78ESY-024029125
S78ESY-024031075
S78ESY-024031125
S78ESY-024031150
S78ESY-024034075
S78ESY-024034125
S78ESY-036031100
S78ESY-036031150
S78ESY-036037100
S78ESY-036037150
S78ESY-036045125
S78ESY-036045200
S78ESY-036055125
S78ESY-036055200
S78ESY-050037125
S78ESY-050037200
S78ESY-050055250
S78ESY-065055300
S78ESY-075063400
S78ESY-085075250
S78ESY-100075500
.240
.240
.240
.240
.240
.240
.240
.240
.240
.240
.240
.360
.360
.360
.360
.360
.360
.360
.360
.500
.500
.500
.650
.750
.850
1.000
.026
.026
.026
.026
.029
.029
.031
.031
.031
.034
.034
.031
.031
.037
.037
.045
.045
.055
.055
.037
.037
.055
.055
.063
.075
.075
.75
1.00
1.12
1.25
.75
1.25
.75
1.25
1.50
.75
1.25
1.00
1.50
1.00
1.50
1.25
2.00
1.25
2.00
1.25
2.00
2.50
3.00
4.00
2.50
5.00
1.29
1.97
2.31
2.64
1.17
2.32
1.11
2.14
2.64
1.04
1.96
2.02
3.81
1.68
3.06
1.93
3.49
1.66
2.87
2.65
6.12
4.82
7.83
10.84
4.71
15.26
2.75
2.75
2.75
2.75
3.75
3.75
4.41
4.41
4.41
5.83
5.83
3.07
3.07
4.91
4.91
8.50
8.50
14.66
14.66
3.67
3.67
10.91
8.41
10.66
15.33
13.08
4.7
2.5
2.1
1.8
8.2
3.2
11.5
4.4
3.5
18.4
7.4
2.7
1.2
6.6
2.8
11.3
5.2
32.2
15.2
2.3
.8
4.2
1.6
1.4
6.2
1.2
13
14
15
16
10-90
COMPRESSION SPRINGS
SQUARED AND GROUND ENDS
RIGHT-HAND WOUND
R
Inch
MATERIAL:
T
1
2
3
O.D.
INCH COMPONENT
Catalog Number
O.D.
Wire
Dia.
L
Free
Length
L1
Length
* S78CSY-005006031
* S78CSY-005007038
* S78CSY-005008025
* S78CSY-005008050
* S78CSY-008010025
* S78CSY-008010050
* S78CSY-008012038
* S78CSY-008012075
S78CSY-012014025
S78CSY-012016025
S78CSY-012016050
S78CSY-012018038
S78CSY-012018062
S78CSY-012018075
S78CSY-012020038
S78CSY-012020075
S78CSY-012022050
S78CSY-012022100
S78CSY-014021025
S78CSY-014021038
S78CSY-018016031
S78CSY-018018050
S78CSY-018018100
S78CSY-018020050
S78CSY-018020100
S78CSY-018022025
.057
.057
.057
.057
.088
.088
.088
.088
.120
.120
.120
.120
.120
.120
.120
.120
.120
.120
.148
.148
.180
.180
.180
.180
.180
.180
.006
.007
.008
.008
.010
.010
.012
.012
.014
.016
.016
.018
.018
.018
.020
.020
.022
.022
.021
.021
.016
.018
.018
.020
.020
.022
.31
.38
.25
.50
.25
.50
.38
.75
.25
.25
.50
.38
.62
.75
.38
.75
.50
1.00
.25
.38
.31
.50
1.00
.50
1.00
.25
.138
.187
.138
.263
.130
.245
.216
.422
.138
.145
.280
.237
.378
.448
.260
.500
.356
.709
.162
.237
.143
.239
.471
.263
.505
.144
* Ends squared, not ground

Free length L is for reference only. Load at L1 is attained at length L1.
Load at
L1
lbf
.19
.32
.50
.50
.50
.50
.89
.89
1.02
1.53
1.53
2.13
2.13
2.13
2.76
2.76
3.73
3.73
2.62
2.62
1.04
1.47
1.47
1.91
1.91
2.61
Solid
Height
Spring
Rate
lbf / in.
1.1
1.6
4.4
2.1
4.2
1.9
5.4
2.7
9.2
14.6
6.9
14.9
8.8
7.1
23.1
11.0
25.9
12.2
29.7
18.3
6.2
5.6
2.7
8.1
3.8
24.7
.088
.130
.106
.195
.098
.172
.172
.293
.101
.119
.208
.194
.297
.359
.226
.407
.319
.600
.143
.193
.087
.144
.252
.176
.302
.121
6
7
8
9
10
11
12
13
14
15
10-91
16
I
R
COMPRESSION SPRINGS
SQUARED AND GROUND ENDS
RIGHT-HAND WOUND
Inch
MATERIAL:
1
2
O.D.
3
4
5
6
7
8
9
10
11
12
INCH COMPONENT
Catalog Number
O.D.
Wire
Dia.
L
Free
Length
L1
Length
S78CSY-018022050
S78CSY-018022100
S78CSY-018024050
S78CSY-018024100
S78CSY-018026050
S78CSY-018026100
S78CSY-018029075
S78CSY-018029150
S78CSY-018032075
S78CSY-018032150
S78CSY-024026050
S78CSY-024026062
S78CSY-024026100
S78CSY-024035050
S78CSY-024035100
S78CSY-024038075
S78CSY-024038150
S78CSY-024040100
S78CSY-024040200
S78CSY-030032062
S78CSY-030042044
S78CSY-036042088
S78CSY-042045100
S78CSY-048055125
S78CSY-060063150
S78CSY-072072200
.180
.180
.180
.180
.180
.180
.180
.180
.180
.180
.240
.240
.240
.240
.240
.240
.240
.240
.240
.300
.300
.360
.420
.480
.600
.720
.022
.022
.024
.024
.026
.026
.029
.029
.032
.032
.026
.026
.026
.035
.035
.038
.038
.040
.040
.032
.042
.042
.045
.055
.063
.072
.50
1.00
.50
1.00
.50
1.00
.75
1.50
.75
1.50
.50
.62
1.00
.50
1.00
.75
1.50
1.00
2.00
.62
.44
.88
1.00
1.25
1.50
2.00
.280
.540
.298
.575
.312
.610
.501
.982
.536
1.054
.279
.317
.508
.328
.628
.510
.984
.691
1.355
.312
.310
.483
.475
.650
.750
.950
* Free length L is for reference only. Load at L1 is attained at length L1.
13
14
15
16
10-92
Load at
L1
lbf
2.61
2.61
3.17
3.17
4.19
4.19
5.36
5.36
7.36
7.36
3.21
3.21
3.21
6.95
6.95
9.21
9.21
10.02
10.02
4.66
9.84
8.33
8.75
13.49
14.99
17.49
Solid
Height
.192
.355
.232
.408
.247
.461
.418
.778
.456
.885
.169
.208
.313
.286
.496
.407
.768
.592
1.106
.223
.230
.346
.352
.474
.526
.677
Spring
Rate
lbf / in.
11.8
5.4
15.7
7.5
22.3
10.2
21.5
10.3
34.4
15.7
14.5
10.6
6.2
40.4
18.7
38.4
17.8
32.5
15.6
15.2
75.6
21.0
16.7
22.5
20.0
16.7
TORSION SPRINGS
LEFT-HAND WOUND
180 DEFLECTION
Inch
MATERIAL:
302 Stainless Steel
Right-hand wound and other springs

T
1
O.D.
3
E
INCH COMPONENT
Catalog Number
D
Wire
Dia.
Mandrel
Size
O.D.
E
Ref.
Min.*
Axial
Space
S78TSY-012180109
S78TSY-015180109
S78TSY-018180140
S78TSY-021180156
S78TSY-025180203
S78TSY-030180250
S78TSY-035180281
S78TSY-040180343
S78TSY-048180406
S78TSY-054180421
S78TSY-063180500
.012
.015
.018
.021
.025
.030
.035
.040
.048
.054
.063
.109
.109
.140
.156
.203
.250
.281
.343
.406
.421
.500
.166
.183
.216
.247
.304
.394
.450
.518
.618
.654
.767
.500
.750
.750
1.000
1.000
1.000
1.250
2.000
2.000
2.000
2.000
.059
.075
.109
.127
.151
.181
.212
.242
.292
.405
.475
4
Torque
lbf in.
.047
.093
.140
.218
.375
.625
1.000
1.375
2.500
3.275
5.150
* Space required on application to allow for operation of the spring.
5
6
7
8
9
ANTI-BACKLASH
MATERIAL:
1/16 to 1/8 2 PL.
10
11
90 2
.005 R
2 PL.
d
75 2 PL.
INCH COMPONENT
Catalog Number
d
Wire Dia.
D
Outside Dia.
.005
Max.
Mandrel
Size
S78ASY-0160270
S78ASY-0180345
S78ASY-0240250
S78ASY-0240353
S78ASY-0240440
S78ASY-0240480
S78ASY-0260530
S78ASY-0451000
.016
.018
.024
.024
.024
.024
.026
.045
.270
.345
.250
.353
.440
.480
.530
1.000
.211
.270
.189
.277
.347
.377
.417
.792
.0003
12
Max.
Torque
Angular
Constant
Deflection Deg. ozf in. / Deg.
10%
34
39
18
27
35
39
40
40
10%
.04
.05
.22
.15
.12
.11
.14
.64
10-93
13
14
15
16
ROUND SPACERS
SCREW SIZE BORES
R
T
MATERIAL:
Aluminum - Plain
Brass - Bright Dip
Plastic - Nylon 6/6
Stainless Steel
Inch
1
I.D.
2
3
INCH COMPONENT
Catalog Number
4
5
6
7
8
9
10
11
12
13
14
15
16
Aluminum, Plain
A 9A43-F1208
A 9A43-F1212
A 9A43-F1216
A 9A43-F1406
A 9A43-F1408
A 9A43-F1408A
A 9A43-F1412
A 9A43-F1416
A 9A43-F1420
A 9A43-F1424
A 9A43-F1708
A 9A43-F1716
A 9A43-F1724
A 9A43-F1732
Brass, Bright Dip
A 9B43-F1208
A 9B43-F1212
A 9B43-F1408
A 9B43-F1432
A 9B43-F1706
Plastic, Nylon 6/6
A 9P43-F1408
A 9P43-F1412
A 9P43-F1412A
Stainless Steel
A 9X43-F1208
A 9X43-F1212
A 9X43-F1216
A 9X43-F1406
A 9X43-F1408
A 9X43-F1412
A 9X43-F1412A
A 9X43-F1416
A 9X43-F1416A
A 9X43-F1420
A 9X43-F1424
A 9X43-F1428
A 9X43-F1432
A 9X43-F1708
A 9X43-F1712
A 9X43-F1716
A 9X43-F1720
A 9X43-F1724
A 9X43-F1732
10-94
O.D.
L
Length
O.D.
I.D.
1/4
3/8
1/2
3/16
1/4
1/4
3/8
1/2
5/8
3/4
1/4
1/2
3/4
1
3/16
3/16
3/16
1/4
1/4
3/8
1/4
1/4
1/4
1/4
3/8
1/4
1/4
1/4
.115
.115
.115
.140
.140
.140
.140
.140
.140
.140
.170
.170
.170
.170
1/4
3/8
1/4
1
3/16
3/16
3/16
1/4
1/4
1/4
.115
.115
.140
.140
.171
1/4
3/8
3/8
1/4
1/4
3/8
.140
.140
.140
1/4
3/8
1/2
3/16
1/4
3/8
3/8
1/2
1/2
5/8
3/4
7/8
1
1/4
3/8
1/2
5/8
3/4
1
3/16
3/16
3/16
1/4
1/4
1/4
3/8
1/4
3/8
1/4
1/4
1/4
1/4
1/4
3/8
3/8
1/4
3/8
3/8
.115
.115
.115
.140
.140
.140
.140
.140
.140
.140
.140
.140
.140
.171
.171
.171
.171
.171
.171
THREADED ROUND SPACERS

MATERIAL:
303 Stainless Steel or

Brass, Zinc Plated
R
Inch
T
1
O.D.
2
INCH COMPONENT
Catalog Number
303 Stainless Steel
A 9X43-A44008
A 9X43-A44016
A 9X43-A63208
A 9X43-A63212
A 9X43-A63212A
A 9X43-A63216
A 9X43-A63220
A 9X43-A63224
A 9X43-A63232
A 9X43-A83216
A 9X43-A83220
A 9X43-A83232
Brass, Zinc Plated
A 9B43-A44008
A 9B43-A63208
A 9B43-A63212
A 9B43-A63216
A 9B43-A63220
A 9B43-A63224
A 9B43-A83212
A 9B43-A83216
A 9B43-A83220
A 9B43-A83224
A
Thread
O.D.
L
Length
#4-40
#4-40
#6-32
#6-32
#6-32
#6-32
#6-32
#6-32
#6-32
#8-32
#8-32
#8-32
3/16
3/16
1/4
1/4
3/8
1/4
1/4
1/4
1/4
1/4
1/4
3/8
1/4
1/2
1/4
3/8
3/8
1/2
5/8
3/4
1
1/2
5/8
1
#4-40
#6-32
#6-32
#6-32
#6-32
#6-32
#8-32
#8-32
#8-32
#8-32
3/16
1/4
1/4
1/4
1/4
1/4
3/8
3/8
3/8
3/8
1/4
1/4
3/8
1/2
5/8
3/4
3/8
1/2
5/8
3/4
3
4
5
6
7
8
9
10
11
12
13
14
15
10-95
16
SPACERS
HEXAGONAL THREADED
R
T
1
MATERIAL:
Aluminum - Plain
Brass - Bright Dip
Stainless Steel
Inch
Government approved.
Other sizes and finishes are
THREAD
INCH COMPONENT
Catalog Number
3
4
5
6
7
8
9
Brass
Aluminum
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
9A43-E44008
9A43-E44012
9A43-E44016
9A43-E63208
9A43-E63212
9A43-E63216
9A43-E63220
9A43-E63224
9A43-E63228
9A43-E63232
9A43-E63216A
9A43-E63228A
9A43-E63232A
9A43-E83212
9A43-E83216
9A43-E83232
9A43-E83212A
9A43-E83216A
9A43-E83220A
9A43-E83224A
9A43-E83228A
9A43-E83232A
A
A
*A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
9B43-E44008
9B43-E44012
9B43-E44016
9B43-E63208
9B43-E63216
9B43-E63220
9B43-E63224
9B43-E63228
9B43-E63232
9B43-E63216A
9B43-E63228A
9B43-E63232A
9B43-E83212B
9B43-E83216B
9B43-E83232B
9B43-E83212
9B43-E83216
9B43-E83224
9B43-E83228
9B43-E83232
Stainless Steel
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
9X43-E44008
9X43-E44012
9X43-E44016
9X43-E63208
9X43-E63212
9X43-E63216
9X43-E63220
9X43-E63224
9X43-E63228
9X43-E63232
9X43-E63216A
9X43-E63228A
9X43-E63232A
9X43-E83212
9X43-E83216
9X43-E83232
9X43-E83212A
9X43-E83216A
9X43-E83220A
9X43-E83224A
9X43-E83228A
9X43-E83232A
L
Length
Thread
1/4
3/8
1/2
1/4
3/8
1/2
5/8
3/4
7/8
1
1/2
7/8
1
3/8
1/2
1
3/8
1/2
5/8
3/4
7/8
1
3/16
3/16
3/16
1/4
1/4
1/4
1/4
1/4
1/4
1/4
3/8
3/8
3/8
1/4
1/4
1/4
3/8
3/8
3/8
3/8
3/8
3/8
#4-40
#4-40
#4-40
#6-32
#6-32
#6-32
#6-32
#6-32
#6-32
#6-32
#6-32
#6-32
#6-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
10
11
DP
SQUARE THREADED
MATERIAL:
Aluminum, Anodized
B
B
12
13
14
15
16
L .003
INCH COMPONENT
Catalog Number
A
A
A
A
A
A
A
A
A
9A43-A063232
9A43-A063248
9A43-A063264
9A43-A063280
9A43-A083248
9A43-A083264
9A43-A083280
9A43-A103264
9A43-A103280
10-96
L
Length
Thread
DP
1
1-1/2
2
2-1/2
1-1/2
2
2-1/2
2
2-1/2
1/4
1/4
1/4
1/4
3/8
3/8
3/8
1/2
1/2
#6-32
#6-32
#6-32
#6-32
#8-32
#8-32
#8-32
#10-32
#10-32
1/4
1/4
1/4
1/4
3/8
3/8
3/8
3/8
3/8
ROUND STAND-OFFS
THREADED
SWAGE TYPE
5/32 O.D.
R
Inch
MATERIAL:
Brass, Zinc Plated
+.000
+.000
.098 -.003
#2-56
THREAD
.125 -.003
H
5/32
INCH COMPONENT
Catalog Number
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
9B43-D104
9B43-D106
9B43-D112
9B43-D116
9B43-D204
9B43-D206
9B43-D208
9B43-D212
9B43-D216
9B43-D304
9B43-D306
9B43-D308
9B43-D312
9B43-D316
9B43-D404
9B43-D406
9B43-D408
9B43-D412
9B43-D416
H
Height
L
Length
Panel
Thickness
1/8
3/16
3/8
1/2
1/8
3/16
1/4
3/8
1/2
1/8
3/16
1/4
3/8
1/2
1/8
3/16
1/4
3/8
1/2
.075
.075
.075
.075
.105
.105
.105
.105
.105
.135
.135
.135
.135
.135
.165
.165
.165
.165
.165
1/32
1/32
1/32
1/32
1/16
1/16
1/16
1/16
1/16
3/32
3/32
3/32
3/32
3/32
1/8
1/8
1/8
1/8
1/8
4
5
6
7
8
9
10
11
12
13
14
15
10-97
16
I
R
T
ROUND STAND-OFFS
THREADED
SWAGE TYPE
1/4 O.D.
Inch
MATERIAL:
Brass, Zinc Plated
1
2
.150 DRILL
#6-32
THREAD
+.000
.188 -.003
4
5
INCH COMPONENT
Catalog Number
6
7
8
9
10
11
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
9B43-B104
9B43-B106
9B43-B108
9B43-B112
9B43-B116
9B43-B204
9B43-B206
9B43-B208
9B43-B212
9B43-B216
9B43-B308
9B43-B312
9B43-B404
9B43-B406
9B43-B408
9B43-B412
9B43-B416
9B43-B516
9B43-B608
9B43-B612
9B43-B616
12
13
14
15
16
1/4
10-98
H
Height
L
Length
Panel
Thickness
1/8
3/16
1/4
3/8
1/2
1/8
3/16
1/4
3/8
1/2
1/4
3/8
1/8
3/16
1/4
3/8
1/2
1/2
1/4
3/8
1/2
.075
.075
.075
.075
.075
.105
.105
.105
.105
.105
.135
.135
.165
.165
.165
.165
.165
.195
.230
.230
.230
1/32
1/32
1/32
1/32
1/32
1/16
1/16
1/16
1/16
1/16
3/32
3/32
1/8
1/8
1/8
1/8
1/8
5/32
3/16
3/16
3/16
HEXAGONAL STAND-OFFS
THREADED
SWAGE TYPE
MATERIAL:
303 Stainless Steel
Inch
T
1
2
.150 +.002
-.001
#6-32
THREAD
+.000
.188 -.003
H
1/4
INCH COMPONENT
Catalog Number
H
Height
L
Length
Panel
Thickness
*S5921Y-SO10-01
S5921Y-SO10-05
S5921Y-SO10-09
S5921Y-SO10-17
S5921Y-SO10-25
*S5921Y-SO10-02
S5921Y-SO10-02A
S5921Y-SO10-06
S5921Y-SO10-10
S5921Y-SO10-18
S5921Y-SO10-26
S5921Y-SO10-03A
S5921Y-SO10-07
S5921Y-SO10-11
S5921Y-SO10-19
S5921Y-SO10-27
S5921Y-SO10-04A
S5921Y-SO10-08
S5921Y-SO10-12
S5921Y-SO10-20
S5921Y-SO10-28
S5921Y-SO10-29
S5921Y-SO10-30
S5921Y-SO10-31
S5921Y-SO10-32
S5921Y-SO10-33
1/8
3/16
1/4
3/8
1/2
1/8
1/8
3/16
1/4
3/8
1/2
1/8
3/16
1/4
3/8
1/2
1/8
3/16
1/4
3/8
1/2
1/8
3/16
1/4
3/8
1/2
.075
.075
.075
.075
.075
.105
.105
.105
.105
.105
.105
.135
.135
.135
.135
.135
.165
.165
.165
.165
.165
.230
.230
.230
.230
.230
1/32
1/32
1/32
1/32
1/32
1/16
1/16
1/16
1/16
1/16
1/16
3/32
3/32
3/32
3/32
3/32
1/8
1/8
1/8
1/8
1/8
3/16
3/16
3/16
3/16
3/16
* Items with #4-40 thread.
6
7
8
9
10
11
12
13
14
15
10-99
16
I
R
HEXAGONAL STAND-OFFS
THREADED
SWAGE TYPE
MATERIAL:
Inch
Brass, Zinc Plated
1
2
.150 +.003
-.000
#6-32
THREAD
.188 +.000
-.003
3
H
4
5
6
7
8
9
10
11
INCH COMPONENT
Catalog Number
A
A
A
*A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
9B43-C104
9B43-C106
9B43-C108
9B43-C116
9B43-C206
9B43-C208
9B43-C212
9B43-C216
9B43-C304
9B43-C308
9B43-C312
9B43-C404
9B43-C406
9B43-C412
9B43-C416
9B43-C606
9B43-C608
9B43-C612
9B43-C616
H
Height
L
Length
Panel
Thickness
1/8
3/16
1/4
1/2
3/16
1/4
3/8
1/2
1/8
1/4
3/8
1/8
3/16
3/8
1/2
3/16
1/4
3/8
1/2
.075
.075
.075
.075
.105
.105
.105
.105
.135
.135
.135
.165
.165
.165
.165
.230
.230
.230
.230
1/32
1/32
1/32
1/32
1/16
1/16
1/16
1/16
3/32
3/32
3/32
1/8
1/8
1/8
1/8
3/16
3/16
3/16
3/16
12
13
14
15
16
1/4
10-100
CHASSIS FASTENERS
MATERIAL:
Aluminum - Plain
Brass - Zinc Plated
R
Inch
Special plating on request.
T
1
DRILL 5/32 (.156)

x .093 DEEP
#6-32
THREAD
.187
.002
5/16
5/32
3
5/16
7/32
L
3/8
INCH COMPONENT
Catalog Number *
Aluminum
Brass
.003
Thickness
of Board
S6400Y-SO33-06
S6400Y-SO33-01
S6400Y-SO33-03
.105
.135
.165
1/16
3/32
1/8
5
6
7
8
9
10
11
12
13
14
15
10-101
16
PANEL BUSHINGS
HEXAGONAL NUT
R
T
MATERIAL:
Inch
Bushing - Brass, Nickel Plated or

Nut - Brass, Nickel Plated
1
2
B
C
E
D
3/32
BUSHING
INCH COMPONENT
Catalog Number
Brass
Aluminum
Bushing
Bushing
8
9
10
A
A
A
A
A
A
A
A
A
A
9B42-D10
9B42-D14
9B42-D18
9B42-D12
9B42-D16
9B42-D20
9B42-D24
9B42-A11
9B42-A14
9B42-A18
11
12
13
14
15
16
E
UNDERCUT
10-102
A 9A42-D10
A 9A42-D14
A 9A42-D12
A 9A42-D16
A
Dia.
E
Hex.
Nut
.127
.127
.127
.252
.252
.252
.252
.252
.252
.252
5/16
7/16
9/16
3/8
1/2
5/8
3/4
11/32
7/16
9/16
1/16
1/16
1/16
1/16
1/16
1/16
1/16
3/32
3/32
3/32
3/8
3/8
3/8
1/2
1/2
1/2
1/2
1/2
1/2
1/2
3/8
3/8
3/8
1/2
1/2
1/2
1/2
1/2
1/2
1/2
F
Panel
Thread Thickness
1/4-32
1/4-32
1/4-32
3/8-32
3/8-32
3/8-32
3/8-32
3/8-32
3/8-32
3/8-32
1/8
1/4
3/8
1/8
1/4
3/8
1/2
1/8
3/16
1/4
11 - GEARHEADS & SPEED REDUCERS

R
Inch
Bu-Ord Gearheads and Speed Reducers Technical Information.............................................................................11-6

Gearheads
Bu-Ord Size 8.............................................................................................................................................................11-10
Bu-Ord Size 11...........................................................................................................................................................11-11
Bu-Ord Size 15...........................................................................................................................................................11-18
Bu-Ord Size 18...........................................................................................................................................................11-21
Speed Reducers
Bu-Ord Size 11...........................................................................................................................................................11-23
Bu-Ord Size 15...........................................................................................................................................................11-26
Bu-Ord Size 18...........................................................................................................................................................11-30
Synchro Mounting Clamps..............................................................................................................................................11-32
T
1
2
3
4
5
Gearhead Attaching Clamps...........................................................................................................................................11-41

Precision Synchro Locking Clamps...............................................................................................................................11-41
Planetary Gear System....................................................................................................................................................11-42

NEMA Size Planetary and Spur Gearheads Technical Information.........................................................................11-44
NEMA Size Inline Gearhead Selection Chart...............................................................................................................11-45
PRX and RTX Planetary Gearheads.......................................................................................................................11-46
CG Planetary Gearheads.........................................................................................................................................11-51
PG Planetary Gearheads.........................................................................................................................................11-55
EG Planetary Gearheads.........................................................................................................................................11-59
Gearhead to Motor Mounting Information...........................................................................................................11-64
T-Series Planetary Gearheads................................................................................................................................11-66
Spur Gearheads........................................................................................................................................................11-72
7
8
9
10
NEMA Size Right Angle & Dual Output Right Angle Gearhead Selection Chart....................................................11-75
Right Angle Gearheads
T-Series Planetary Gearheads................................................................................................................................11-92
Spur Gearheads........................................................................................................................................................11-98
Inertia Matching Example...............................................................................................................................................11-101
Dual-Output Right Angle Gearheads
Spur Gearheads........................................................................................................................................................11-118
11
12
13
14
15
11-1
16

R
Inch
T
1
Heavy-Duty Gearheads, Bu-Ord Size 8

pg. 11-10
Gearheads, Bu-Ord Size 11 Heavy-Duty Gearheads, Bu-Ord Size 11

pg. 11-11
pg. 11-12
Offset Gearheads, Bu-Ord Size 11

pg. 11-13
Zero Backlash Gearheads Transducer Gearheads, Bu-Ord Size 11

Bu-ord Size 11 pg. 11-13
pgs. 11-15 thru 11-17
2
3
4
5
6
Gearheads, Bu-Ord Size 15 Heavy-Duty Gearheads, Bu-Ord Size 15

pgs. 11-18 & 11-19
pg. 11-20
Gearheads, Bu-Ord Size 18

pg. 11-21
7
8
9
Heavy-Duty Gearheads, Bu-Ord Size 18

pg. 11-22
Speed Reducers, Bu-Ord Size 11 Offset Speed Reducers, Bu-Ord Size 11

pg. 11-23
pg. 11-24
10
11
Zero-Backlash Speed Reducers

Bu-Ord Size 11
pg. 11-25
Speed Reducers, Bu-Ord Size 15

pgs. 11-26 & 11-27
Single-End Speed Reducers

Bu-Ord Size 15 pgs. 11-28 & 11-29
Speed Reducers, Bu-Ord Size 18

pg. 11-30
Single-End Speed Reducers

Bu-Ord Size 18
pg. 11-31
Synchro Mounting Clamps

pgs. 11-32 & 11-33

pgs. 11-36 & 11-37

pg. 11-40
12
13
14
15
16
11-2
pgs. 11-34 & 11-35

R
Inch
Gearhead Attaching Clamps

pg. 11-41
Precision Synchro Locking Clamp Heavy-Duty PRX Planetary Gearheads

pg. 11-41 NEMA Size 23
pg. 11-47
T
1
2
3
Heavy-Duty PRX Planetary Gearheads

NEMA Size 34
pg. 11-48
Standard-Duty RTX Planetary

Gearheads, NEMA Size 23 pg. 11-49
Standard-Duty RTX Planetary

4
5
Compact Series CG Planetary


6
7
8
Low Backlash PG Planetary



9
10

Economy Series EG Planetary


11
12
13


T-Series Planetary Gearheads

NEMA Size 23
pg. 11-66
14
15
11-3
NEMA Size 34
pg. 11-68

NEMA Size 42
pg. 11-70
Spur Gearheads, NEMA Size 23

pg. 11-72
16

R
Inch
T
1

pg. 11-73

pg. 11-74
Right Angle PG Planetary Gearheads

Size 17
pg. 11-76

Size 23
pg. 11-78

Size 34
pg. 11-80

Size 42
pg. 11-82
Right Angle EG Planetary Gearheads

Size 17
pg. 11-84

Size 23
pg. 11-86

Size 34
pg. 11-88

Size 42
pg. 11-90
T-Series Right Angle Planetary


Right Angle Spur Gearheads

NEMA Size 23
pg. 11-98

NEMA Size 34
pg. 11-99
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
11-4

R
Inch

NEMA Size 42
pg. 11-100
Dual-Output PG Planetary Gearheads

Size 17
pg. 11-102

Size 23
pg. 11-104
T
1
2
3

Size 34
pg. 11-106

Size 42
pg. 11-108
Dual-Output EG Planetary Gearheads

Size 17
pg. 11-110
4
5

Size 23
pg. 11-112

Size 34
pg. 11-114

Size 42
pg. 11-116
6
7
8
Dual-Output Spur Gearheads

NEMA Size 23
pg. 11-118

NEMA Size 34
pg. 11-119

NEMA Size 42
pg. 11-120
9
10
11
12
13
14
15
11-5
16
BU-ORD GEARHEADS AND SPEED REDUCERS

R
Inch
T
1
2
3
4
5
6
7
8
9
0
STERLIN G IN STRUMEN T Basic Gearheads (T-Series,
except transducer gearheads) are designed for use
in high-accuracy electromechanical systems. All
gears are precision cut. The output gear and all
stage pinions are made of hardened 416 Stainless
Steel. All stage gears are made of Aluminum Bronze
due to its excellent wear-in properties. Ball bearings
are Stainless Steel. Housings are black-anodized
Aluminum Alloy and are precision bored for exacting
center distances. The cantilever design combined with
wide bearing span results in extremely low backlash.
These units are designed to meet all requirements of
MIL-STD-810. The gearhead is attached easily and
securely to the Bu-Ord frame size servomotor without
modifications to the input pinion and without complicated adapters, screw threads, etc., by the versatile
mounting clamp supplied. This method (an original
STERLING design) simplifies the replacement of
damaged motors and interchangeability among similar
units. Mounting dimensions are directly identical to
Bu-Ord OP 1755 motor dimensions.
The basic STERLING INSTRUMENT Gearhead
design is adapted to the double-ended Speed
Reducers. The transition is accomplished by removing the motor and inserting the speed reducer input
assembly using the same clamp to hold it securely and
accurately in position. Either input or output end can
be mounted in position since dimensions on both ends
are identical. Models S9115A-T6123, S9115A-T6123A,
and S9118A-T6128 single-end Speed Reducers (PAT.
NO. 2,943,507) use a compact reduction system whose
input and output shafts are coaxially extended from
the mounting end, enabling the design engineer to
insert a large reduction at any location in the gear
train with minimum space and backlash requirements.
10
11
12
13
14
15
16
11-6
STERLING INSTRUMENT Heavy-Duty Gearheads

(P-Series) are designed for use in high-accuracy
electromechanical systems with stepping motors. They
feature a unique cantilever design in the output stage,
providing maximum power (torque) per volume, without
affecting the backlash. All gears and pinions are made of
hardened 416 Stainless Steel, contributing to improved
life in a hostile environment. All bearings are Stainless
Steel with proper dynamic load to meet the required
torque. Housings are made of black-anodized Aluminum
and are precision bored. They can be converted easily
to low-backlash or anti-backlash design or to higher
torque application. Consult STERLING INSTRUMENT
Engineering Department for special applications.
STERLING INSTRUMENT Transducer Gearheads are
designed to meet the strictest criteria of minimum
Integrated Position Error - IPE. (Integrated Position
Error is a function of all the independent errors in the
gear train like backlash and transmission error. Refer
to Precision Gearing by G. Michalec, John Wiley, 1966).
The transducer gearheads feature unique compact
design allowing direct mounting of the transducer on
the output side of the gearhead. This saves space and
cost of additional components like couplings and end
caps. Each gearhead has two mounting options: Clamp
Type (Type C) and Adapter Plate (Type A). The standard
transducer gearhead has only one size, Bu-Ord size 11,
which fits the most popular size of transducers. Other
SPECIAL GEARHEADS AND SPEED REDUCERS

R
Inch
STERLING INSTRUMENT offers a wide choice of Standard Gearheads and Speed Reducers in three standard Bu-Ord
Sizes. However, in many applications a special unit is required. Below is a listing of some of the Special Applications
Gearheads and Speed Reducers that Sterling Instrument can produce and for which designs exist:

Zero-Backlash Gearheads and Speed Reducers for applications which require absolutely no lost motion
throughout the Gear Train. Consult Sterling Instrument Engineering for the Gearhead & Speed Reducer sizes,
ratios, and output loads where Zero Backlash is applicable.
Splined Shaft Gearheads and Speed Reducers for applications which require direct meshing with other
component parts of the Gear Train. Consult Sterling Instrument Engineering for the applicable Diametral Pitches
and numbers of teeth.
Low-Backlash Gearheads and Speed Reducers for applications which do not require Zero Backlash, but do
require lower Backlash than standard units. Consult Sterling Instrument Engineering for the applicable
Backlash Specifications and output loads.
Tandem Gearheads and Speed Reducers for applications which require reduction ratios higher than shown in
the tables of this catalog.
Integral Slip Clutch Gearheads and Speed Reducers for applications which require a built-in Torque Limiting
Device.

Heavy-Duty Gearheads and Speed Reducers for applications which require two to three times the available
output Torque of standard Gearheads and Speed Reducers.
3
4
5

Exact Ratio Gearheads and Speed Reducers for applications which require reduction ratios which are even
integers.

6
7
Sterling Instrument also builds Speed Increasers in Bu-Ord configurations.
8
9
10
Heavy-Duty Gearheads
Bu-Ord Size 8
S9108A-...
11
Speed Reducers
Bu-Ord Size 15
S9115A-T6-...
12
For entire product line, technical information, 3D models and online buying, visit www.sdp-si.com/estore
13
14
15
11-7
16
ZERO-BACKLASH GEARHEADS AND SPEED REDUCERS

PAT. NO. 3,396,594
R
Inch
T
1
2
In many electromechanical instruments it is often necessary to use, as a component part of a system, a gear
train which contributes a minimum amount of backlash
or lost motion to the system in order to obtain maximum
system accuracy. With this need in mind, STERLING
INSTRUMENT has designed a gear train arrangement
which completely eliminates backlash and lost mo-
tion from the entire gear train. At the same time, this
gear system allows unusually high torque loads at the
gear train output without overriding the spring loading of the system. The drawing below illustrates the
application of this zero-backlash system to a gearhead
or speed reducer.
4
5
6
7
D1
C1
B1
B2
C2
D2
8
9
10
11
12
13
14
15
16
BACKLASH ELIMINATING
GEAR TRAIN
STANDARD
GEAR TRAIN
A
The standard gear train (A, B1, C1, D1, E) is identical to
that which is found in STERLING INSTRUMENT standard
catalog gearheads & speed reducers. Pinion & gear
clusters B 2 & C 2 , in the backlash eliminating gear train,
are duplicates of pinion & gear clusters B1 & C1, in the
standard gear train. The pinion of pinion & gear cluster
D 2 is identical to the pinion of pinion & gear cluster D1
with the addition of the torsion spring retaining slot in
the end of the D 2 pinion. As per normal practice, the
gear & pinion on the D1 cluster are fastened together
via press fitting & staking. The gear on the D 2 cluster is
a slip fit on the mounting diameter of the D 2 pinion and
axially retained on the mounting diameter by the torsion
spring. Input pinion E and output gear A are common to
both halves of the train.
In assembling the gearhead to a servomotor or to the
input pinion of a speed reducer, the gear of cluster D1 is
restrained from rotation by inserting a wedge of a soft
11-8
material (e.g., aluminum, nylon, etc.) thru the access

hole provided in the housing and into a tooth space. The
gear of cluster D 2 is then rotated, in a direction which
winds the torsion spring the desired number of teeth
and restrained from rotating, using a second wedge
thru the second access hole. Since all speed reducer
input pinions and motor pinions have an odd number
of teeth, it is easier to install the motor pinion or input
pinion, if the D1 & D 2 gears are held by the wedges in
a position where a tooth space on one of the gears is
opposite a tooth on the other gear. Once the pinion is
meshed with the D1 & D 2 gears and the pilot diameter
of the motor or speed reducer input is seated within the
gearhead shell, the wedges are released, completing
the zero-backlash path.
BU-ORD GEARHEADS AND SPEED REDUCERS

R
Inch
0

STERLING INSTRUMENT gearheads and speed
reducers are made to the highest exacting standards
of craftsmanship. The gearheads are attachable to the
U.S. Bureau of Ordnance (Bu-Ord for short) frame size
servomotors without modifications to the input pinions
and without complicated adapters, screw threads, etc.

by the versatile mounting clamps supplied. Mounting
dimensions are identical to Bu-Ord OP 1755 motor
dimensions.
T
1
2
INCH COMPONENT
Catalog Series
Description
D.P.
Teeth
Backlash
Shaft Orientation
11
11
11
15
15
18
8
11
15
18
120
120
120
120
96
96
120
120
120
96
13
13
13
13
15
15
13
13
13
15
LOW
LOW
ZERO
LOW
LOW
LOW
LOW
LOW
LOW
LOW
IN-LINE OUTPUT
OFFSET OUTPUT
IN-LINE OUTPUT
IN-LINE OUTPUT
IN-LINE OUTPUT
IN-LINE OUTPUT
IN-LINE OUTPUT
IN-LINE OUTPUT
IN-LINE OUTPUT
IN-LINE OUTPUT
Gearhead Selection Guide

S9111A-T617
S9111A-T618
S9111A-T619
S9115A-T623
S9115A-T623A
S9118A-T628
S9108A-P-Series
S9111A-P-Series
S9115A-P-Series
S9118A-P-Series
Catalog Series
Input Pinion
Bu-Ord
Size
Bu-Ord
Size
Speed Reducer Selection Guide

S9111A-T6017
S9111A-T6018
S9111A-T6019
S9115A-T6023
S9115A-T6023A
S9115A-T6123
S9115A-T6123A
S9118A-T6028
S9118A-T6128
11
11
11
15
15
15
15
18
18
Description
Backlash
Shaft Termination
Shaft Orientation
LOW
LOW
ZERO
LOW
LOW
LOW
LOW
LOW
LOW
DOUBLE-ENDED
DOUBLE-ENDED
DOUBLE-ENDED
DOUBLE-ENDED
DOUBLE-ENDED
SINGLE-ENDED
SINGLE-ENDED
DOUBLE-ENDED
SINGLE-ENDED
IN-LINE OUTPUT
OFFSET OUTPUT
IN-LINE OUTPUT
IN-LINE OUTPUT
IN-LINE OUTPUT
COAXIAL OUTPUT
COAXIAL OUTPUT
IN-LINE OUTPUT
COAXIAL OUTPUT
Max.
Weight
oz.
1.5
1.5
1.5
2.5
2.5
4.0
1.0
1.65
2.75
4.4
3
4
5
6
7
Max.
Weight
oz.
2.2
2.2
2.2
4.0
4.0
4.0
4.0
5.5
5.5
8
9
10
11
Catalog Series
Transducer Gearhead Selection Guide
S9111A-T640
S9111A-T641
S9111A-T642
Design Style
Integrated Position Error
Standard
Anti-Backlash
Zero-Backlash
40 arc minutes maximum

12
13
14
15
11-9
16
HEAVY-DUTY GEARHEADS BU-ORD SIZE 8

HIGH-PRECISION
R
T
1
SPECIFICATIONS:
Inch
Input Pinion (Motor): 13 Teeth-120 Pitch

Maximum Backlash: 0 45'
Maximum Starting Torque: .02 ozf in.
1
Precision
Component
Zero backlash, lower backlash, exact ratios, etc.,

.1250
.1245
.5000
.4995
5/16
.055
.064
.040
9/16
4
.643
10
11
12
13
14
15
16
INCH COMPONENT
p)
T (h
25
U
INP
.
OX
PR
MAX.
TORQU OUTPUT
E (ozf in
.)
AP
20
15
.0015
.0010
.0005
Approx. Input (hp)
Max. Output Torque

(ozf in.)
63/64
.750
SERVO
MOTOR
1/2
13/16
10 20 30 40 50 60 70 80 90 100
Output (rpm)
Catalog Number
Ratio
To 1
Rotation
S9108A-P0013R3
S9108A-P0015R3
S9108A-P0018R3
S9108A-P0021R3
S9108A-P0025R3
S9108A-P0030S3
S9108A-P0036S3
S9108A-P0042S3
S9108A-P0054R3
S9108A-P0065R3
S9108A-P0077S3
S9108A-P0099S3
S9108A-P0118S3
S9108A-P0141S3
S9108A-P0169S3
S9108A-P0200R3
S9108A-P0240R3
S9108A-P0284R3
S9108A-P0339R3
S9108A-P0406R3
12.7
15.0
17.8
21.2
25.4
30.0
35.5
42.3
54.4
65.3
77.1
98.7
117.5
141.0
169.2
200.0
240.0
284.3
338.5
406.2
R
R
R
R
R
S
S
S
R
R
S
S
S
S
S
R
R
R
R
R
NOTES: 1. "S" indicates output rotates in the same direction as input; "R" denotes opposite rotation.
2. Ball bearings used throughout.
11-10
GEARHEADS BU-ORD SIZE 11

1-1/16 INCH OUTSIDE DIAMETER
PAT. NO. 2,892,357
R
Inch
SPECIFICATIONS:

Rated Output Torque: 30 ozf in.
1
Precision
Component

For additional information, see preceding technical
data and special gearhead pages.
3/8
.050
.093
.062
.062
.1250
.1245
.6250
.6245
3
7/8
1.062
1/2
1-1/8
#4-40 UNC-2B TAP
X .093 DP., 4 HOLES
EQUALLY SPACED
ON A .812 B.C.
1-5/32
.975
4
SERVO
MOTOR
1.0000
.9995
5
6
INCH COMPONENT
CATALOG NUMBER
S9111A-T617-
Insert Model No. from table below.

Example: S9111A-T617-16 has a 40.15: 1 ratio.
Model
No.
Ratio
To 1
Rotation
Model
No.
Ratio
To 1
Rotation
Model
No.
Ratio
To 1
Rotation
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
5.29
6.83
9.00
10.44
11.89
13.80
15.38
17.84
20.25
23.50
27.27
26.76
31.05
34.59
36.04
40.15
45.56
46.59
52.88
61.36
71.21
60.21
69.87
S
S
S
S
R
R
R
R
R
R
R
S
S
S
S
S
S
S
S
S
S
R
R
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
77.84
81.08
90.33
94.10
102.52
104.83
118.97
121.65
138.06
160.22
185.94
135.47
157.21
175.13
182.44
203.24
211.72
230.66
235.86
245.70
267.68
273.71
310.64
R
R
R
R
R
R
R
R
R
R
R
S
S
S
S
S
S
S
S
S
S
S
S
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
317.64
360.50
418.35
485.50
304.80
353.72
394.04
410.49
457.29
476.37
518.99
530.68
552.83
602.28
615.85
641.55
698.94
714.69
811.12
829.39
941.30
1092.37
1267.69
S
S
S
S
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
9
10
11
12
13
14
15
11-11
16

HIGH-PRECISION
R
T
1
SPECIFICATIONS:
Inch

1
Precision
Component

.1250
.1245
3/8
.050
.093
.062
.062
.6250
.6245
7/8
1.062
1-1/8
#4-40 UNC-2B TAP
X .093 DP., 4 HOLES
EQUALLY SPACED
ON A .812 B.C.
5
6
1/2
1.0000
.9995
Max. Output Torque

(ozf in.)
48
7
8
44
.0040
(hp
.0030
X. I
RO
T
PU
40
P
AP
36
MAX. OU
T
TORQUE PUT
(ozf in.)
32
SERVO
MOTOR
1-15/64
.975
.0020
.0010
Approx. Input (hp)
10 20 30 40 50 60 70 80 90 100
Output (rpm)
9
10
11
12
13
14
15
16
INCH COMPONENT
Catalog Number
Ratio
To 1
Rotation
Catalog Number
Ratio
To 1
Rotation
S9111A-P0018S3
S9111A-P0021R3
S9111A-P0025R3
S9111A-P0028R3
S9111A-P0035R3
S9111A-P0040R3
S9111A-P0046R3
S9111A-P0050R3
S9111A-P0054S3
S9111A-P0065S3
S9111A-P0080S3
S9111A-P0090S3
S9111A-P0104S3
S9111A-P0120S3
S9111A-P0141S3
S9111A-P0170R3
S9111A-P0198R3
17.67
20.61
24.86
28.27
34.53
39.75
46.13
49.88
53.82
64.92
79.81
90.16
103.79
120.45
140.84
169.52
198.23
S
R
R
R
R
R
R
R
S
S
S
S
S
S
S
R
R
S9111A-P0235R3
S9111A-P0275R3
S9111A-P0340R3
S9111A-P0398R3
S9111A-P0464S3
S9111A-P0560S3
S9111A-P0636S3
S9111A-P0777S3
S9111A-P0895S3
S9111A-P1038S3
S9111A-P1211R3
S9111A-P1461R3
S9111A-P1661R3
S9111A-P2030R3
S9111A-P2319R3
S9111A-P2711R3
S9111A-P3170R3
235.42
275.29
340.09
397.68
463.96
559.69
636.28
777.28
894.78
1038.38
1211.45
1461.43
1661.41
2029.56
2318.72
2711.33
3170.42
R
R
R
R
S
S
S
S
S
S
R
R
R
R
R
R
R
11-12
OFFSET GEARHEADS BU-ORD SIZE 11

SPECIFICATIONS:
Inch

1
Precision
Component

T
1

data and special gearhead pages.
3/8
#4-40 UNC-2B TAP X

.093 DP., 4 HOLES
EQUALLY SPACED
ON A .812 B.C.
.1250
.1245
.050
.093
.062
4
7/8
1.062
1-1/8
9/16
1.0000
.9995
1-5/32
.271
.975
SERVO
MOTOR
5
6
7
INCH COMPONENT
CATALOG NUMBER
S9111A-T618Insert Model No. from table below.

Model
No.
Ratio
To 1
Rotation
Model
No.
Ratio
To 1
Rotation
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
5.29
6.83
9.00
10.44
11.89
13.80
15.38
17.84
20.25
23.50
26.76
27.27
31.05
34.59
36.04
40.15
45.56
S
S
S
S
R
R
R
R
R
R
S
R
S
S
S
S
S
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
46.59
52.88
60.21
61.36
69.87
71.21
77.84
81.08
90.33
94.10
102.52
104.83
118.97
121.65
135.47
138.06
157.21
S
S
R
S
R
S
R
R
R
R
R
R
R
R
S
R
S
Model
No.
Ratio
To 1
Rotation
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
160.22
175.13
182.44
185.94
203.24
211.72
230.66
235.86
245.70
267.68
273.71
310.64
317.64
360.50
418.35
485.50
R
S
S
R
S
S
S
S
S
S
S
S
S
S
S
S
10
11
12
13
14
15
11-13
16
I
R
ZERO-BACKLASH GEARHEADS BU-ORD SIZE 11

PAT. NO. 3,396,594
Inch
SPECIFICATIONS:
T
1
Backlash: Zero with load torque less than Z-B torque limit
Z-B Torque Limit: Approximately 1/2 of the ratio (ozf in.)
Angular Compliance: .015 / ozf in.
Starting Torque: .20 ozf in.
1
Precision
Component
For additional information, see preceding technical data

and special gearhead pages.
2
3/8
.050
.093
.062
.062
.1250
.1245
.6250
.6245
7/8
1.062
8
9
The S9111A-T619 series is an extremely low backlash

Bu-Ord Size 11 gearhead for servo applications. All
backlash components due to gear-induced factors are
eliminated. Hence, the name Zero-Backlash Gearhead
has been applied. The zero-backlash feature will remain
fully effective up to the Z-B torque limit. In the Size 11
units, the Z-B torque limit (in ozf in.) is approximately 1/2
12
13
14
1.0000
.9995
of the ratio. If the load torque exceeds the Z-B torque limit,
backlash is introduced. The backlash will be eliminated
when the load torque decreases below the Z-B limit. No
permanent damage will occur providing the load torque
does not exceed the units maximum rated torque. The
angular compliance (not to be confused with backlash)
is approximately 1 arc minute per ounce inch.

Model
No.
Ratio
To 1
Rotation
Model
No.
Ratio
To 1
Rotation
Model
No.
Ratio
To 1
Rotation
01
02
03
04
05
06
07
5.29
6.83
9.00
10.44
11.89
13.80
15.38
S
S
S
S
R
R
R
08
09
10
11
12
13
14
17.84
20.25
23.50
26.76
27.27
31.05
34.59
R
R
R
S
R
S
S
15
16
17
18
19
21
23
36.04
40.15
45.56
46.59
52.88
61.36
71.21
S
S
S
S
S
S
S
15
16
SERVO
MOTOR
INCH COMPONENT
CATALOG NUMBER
10
11
1-5/32
.975
#4-40 UNC-2B TAP

X .093 DP., 4 HOLES
EQUALLY SPACED
ON A .812 B.C.
6
7
1/2
1-1/8
11-14
TRANSDUCER GEARHEADS BU-ORD SIZE 11

STANDARD BACKLASH T640 SERIES
1-1/16 OUTSIDE DIAMETER
U.S. PAT. #2,892,357
R
Inch
SPECIFICATIONS:
Maximum Operating Torque: 20 ozf in.

Maximum Backlash: 20 arc minutes
Maximum Total Transmission Error: 20 arc minutes
Breakaway Torque: .02 ozf in.
Maximum Integrated Position Error: 40 arc minutes
Lubrication: Oil per MIL-L-6085
Maximum Shaft End Play With 1 lbf Gage Load: .001 in.
Maximum Shaft Radial Play with 4 ozf Gage Load: .001 in./in.
1
Precision
Component
1
2
Mounting Type C (ATTACH TO TRANSDUCER USING CLAMP)

This
series is for use
#4-40 UNC-2B
TAP X .093 DP.,
in applications that can
.062
4 HOLES EQ. SP.
.1248
1.0000
tolerate a moderate amount
.1245
.975
.9995
.1248
ON A .812 B.C.
.1245
of backlash. Examples of
this type of application
TRANSDUCER
(REF. ONLY)
are velocity feedback
1.0000
1.062
1.0005
.9995
1.0000
systems or systems that
.875
are unidirectional in nature.
.062
.6250
.6245
M1
.093
.375
.500
1.250
CLAMP
.625
1.125
MAX. SUPPLIED
.093
.020
3
4
5
Mounting Type A (ATTACH TO TRANSDUCER USING ADAPTER PLATE AND SCREWS)

#4-40 UNC-2B TAP X
#4-40 UNC-2B TAP
.062
.093 DP., 4 HOLES,
.1248
.1245 X .093 DP., 4 HOLES EQ.
EQ. SP. ON A
.6250
.975
SP. ON A .812 B.C.
.6245
Schematic Representation
.812 B.C.
for "S" Rotation
TRANSDUCER
(REF. ONLY)
1.0000
1.0005
.9995
1.0000
TRANSDUCER
SHAFT
1.0000
.9995
M2
.1248
.1245
.062
.093
1.350
.500
MAX. ADAPTER PLATE &
SCREWS SUPPLIED
.625
.6250
.6245
1.062
.020
Catalog Number
Mounting Type C
Type C
Mounting
Dist. M1
Catalog Number
Mounting Type A
S9111A-T640C02S
S9111A-T640C03S
S9111A-T640C04S
S9111A-T640C06S
S9111A-T640C08S
S9111A-T640C09S
S9111A-T640C10S
S9111A-T640C12S
S9111A-T640C12R
S9111A-T640C15R
S9111A-T640C16R
S9111A-T640C20R
S9111A-T640C24R
S9111A-T640C30R
S9111A-T640C32R
S9111A-T640C36R
.540 Max.
.540 Max.
.540 Max.
.540 Max.
.540 Max.
.540 Max.
.540 Max.
.540 Max.
.410 Max.
.410 Max.
.410 Max.
.410 Max.
.410 Max.
.410 Max.
.410 Max.
.410 Max.
S9111A-T640A02S
S9111A-T640A03S
S9111A-T640A04S
S9111A-T640A06S
S9111A-T640A08S
S9111A-T640A09S
S9111A-T640A10S
S9111A-T640A12S
S9111A-T640A12R
S9111A-T640A15R
S9111A-T640A16R
S9111A-T640A20R
S9111A-T640A24R
S9111A-T640A30R
S9111A-T640A32R
S9111A-T640A36R
6
7
8
.093
INCH COMPONENT
INCH COMPONENT
Output Gear
Type A
Rota120 D.P.*
Mounting
tion**
No. of Teeth
Dist. M1
.640 Max.
.640 Max.
.640 Max.
.640 Max.
.640 Max.
.640 Max.
.640 Max.
.640 Max.
.510 Max.
.510 Max.
.510 Max.
.510 Max.
.510 Max.
.510 Max.
.510 Max.
.510 Max.
S
S
S
S
S
S
S
S
R
R
R
R
R
R
R
R
Ratio
To 1
2
3
4
6
8
9
10
12
12
15
16
20
24
30
32
36
33
39
44
48
52
48
50
52
48
48
48
50
52
50
52
52
* Supplied with gear clamp.

** "S" indicates output rotates in the same direction as input; "R" denotes reverse rotation.
For transducer shaft .1200/.1195 add "2" to the end of the part number. Example: S9111A-T640C30R2.
Other ratios and sizes available on special order.
10
11
12
13
14
15
11-15
16
I
R
T
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16

ANTI-BACKLASH T641 SERIES
U.S. PAT. #2,892,357
Inch
SPECIFICATIONS:

Maximum Anti-Backlash Torque: 2 ozf in.
Maximum Backlash: 10 arc minutes
Integrated Position Error: 30 arc minutes
Maximum Shaft Radial Play With 4 ozf Gage Load: .001 in./in.
1
Precision
Component
#4-40 UNC-2B TAP

This
series is for use
X .093 DP., 4
.062
HOLES EQ. SP.
in applications that can

.1248
.1248
1.0000
.1245
ON A .812 B.C.
.975
.1245
.9995
tolerate a a limited amount
of backlash. This series
TRANSDUCER
finds wide usage in
(REF. ONLY)
1.0000
1.0005
1.0000
.9995
positioning servos in robotic
1.062
systems. It is also used in position
.875
data transmitting loops and only
.062
.6250
M1
.093
slightly more expensive than the
.6245
.375
.500
1.250
CLAMP
.625
Standard Backlash series.
1.125
MAX. SUPPLIED
.020
.093
#4-40 UNC-2B TAP X
#4-40 UNC-2B TAP
.062
.093 DP., 4 HOLES,
.1248 X .093 DP., 4 HOLES
.6250
EQ. SP. ON A
.975
.6245
.1245 EQ. SP.ON A
.812 B.C.
Schematic Representation .812 B.C.
for "S" Rotation
TRANSDUCER
(REF. ONLY)
1.0000
1.0005
.9995
1.0000
TRANSDUCER
SHAFT
1.0000
.9995
M2
.062
.093
.1248
.1245
1.350
.500
SCREWS SUPPLIED
.625
.6250
.6245
1.062
.020
.093
INCH COMPONENT
INCH COMPONENT
Catalog Number
Mounting Type C
Type C
Mounting
Dist. M1
Catalog Number
Mounting Type A
S9111A-T641C02S
S9111A-T641C03S
S9111A-T641C04S
S9111A-T641C06S
S9111A-T641C08S
S9111A-T641C09S
S9111A-T641C10S
S9111A-T641C12S
S9111A-T641C12R
S9111A-T641C15R
S9111A-T641C16R
S9111A-T641C20R
S9111A-T641C24R
S9111A-T641C30R
S9111A-T641C32R
S9111A-T641C36R
.540 Max.
.540 Max.
.540 Max.
.540 Max.
.540 Max.
.540 Max.
.540 Max.
.540 Max.
.410 Max.
.410 Max.
.410 Max.
.410 Max.
.410 Max.
.410 Max.
.410 Max.
.410 Max.
S9111A-T641A02S
S9111A-T641A03S
S9111A-T641A04S
S9111A-T641A06S
S9111A-T641A08S
S9111A-T641A09S
S9111A-T641A10S
S9111A-T641A12S
S9111A-T641A12R
S9111A-T641A15R
S9111A-T641A16R
S9111A-T641A20R
S9111A-T641A24R
S9111A-T641A30R
S9111A-T641A32R
S9111A-T641A36R
Output Gear
Type A
Rota120 D.P.*
Mounting
tion**
No. of Teeth
Dist. M2
.640 Max.
.640 Max.
.640 Max.
.640 Max.
.640 Max.
.640 Max.
.640 Max.
.640 Max.
.510 Max.
.510 Max.
.510 Max.
.510 Max.
.510 Max.
.510 Max.
.510 Max.
.510 Max.
S
S
S
S
S
S
S
S
R
R
R
R
R
R
R
R
33
39
44
48
52
48
50
52
48
48
48
50
52
50
52
52

For transducer shaft .1200/.1195 add "2" to the end of the part number. Example: S9111A-T642C30R2.
11-16
Ratio
To 1
2
3
4
6
8
9
10
12
12
15
16
20
24
30
32
36

ZERO-BACKLASH T642 SERIES
U.S. PAT. #2,892,357, #3,396,594
R
Inch
SPECIFICATIONS:

Precision
Maximum Anti-Backlash Torque: 5 ozf in.
Component
Maximum Backlash: <1 arc minutes
Maximum Integrated Position Error: 15 arc minutes
Maximum Shaft Radial Play With 4 ozf Gage Load: .001 in./in.
#4-40 UNC-2B
This
series is for use
TAP X .093 DP.,
.062
in applications that require
.1248 4 HOLES EQ. SP.
1.0000
.1248
that the backlash from all
.1245 ON A .812 B.C.
.975
.9995
.1245
sources be as close to
zero as possible. Typically,
TRANSDUCER
the backlash is less than
(REF. ONLY)
1.0000
1.062
1.0005
.9995
1 arc minute. This series
1.0000
of units is widely used in
.875
aircraft and satellite systems
.062
.6250
that require the utmost in
.6245
M1
.093
.375
performance.
.500
1.250
CLAMP
.625
1.125
MAX. SUPPLIED
.020
.093

#4-40 UNC-2B TAP X
#4-40 UNC-2B TAP
.062
Schematic Representation .093 DP., 4 HOLES,
.1248
.1245 X .093 DP., 4 HOLES
for "S" Rotation EQ. SP. ON A
.6250
.975
EQ. SP. ON A .812 B.C.
.6245
.812 B.C.
TRANSDUCER
(REF. ONLY)
TRANSDUCER
SHAFT
1.0000
.9995
M2
.1248
.1245
.062
.093
1.350
.500
SCREWS SUPPLIED
.625
.6250
.6245
1.062
Catalog Number
Mounting Type C
Type C
Mounting
Dist. M1
Catalog Number
Mounting Type A
S9111A-T642C02S
S9111A-T642C03S
S9111A-T642C04S
S9111A-T642C06S
S9111A-T642C08S
S9111A-T642C09S
S9111A-T642C10S
S9111A-T642C12S
S9111A-T642C12R
S9111A-T642C15R
S9111A-T642C16R
S9111A-T642C20R
S9111A-T642C24R
S9111A-T642C30R
S9111A-T642C32R
S9111A-T642C36R
.540 Max.
.540 Max.
.540 Max.
.540 Max.
.540 Max.
.540 Max.
.540 Max.
.540 Max.
.410 Max.
.410 Max.
.410 Max.
.410 Max.
.410 Max.
.410 Max.
.410 Max.
.410 Max.
S9111A-T642A02S
S9111A-T642A03S
S9111A-T642A04S
S9111A-T642A06S
S9111A-T642A08S
S9111A-T642A09S
S9111A-T642A10S
S9111A-T642A12S
S9111A-T642A12R
S9111A-T642A15R
S9111A-T642A16R
S9111A-T642A20R
S9111A-T642A24R
S9111A-T642A30R
S9111A-T642A32R
S9111A-T642A36R
2
3
4
5
6
.020
.093
INCH COMPONENT
INCH COMPONENT
1.0000
.9995
1.0005
1.0000
Output Gear
Type A
Rota120 D.P.*
Mounting
tion**
No. of Teeth
Dist. M2
.640 Max.
.640 Max.
.640 Max.
.640 Max.
.640 Max.
.640 Max.
.640 Max.
.640 Max.
.510 Max.
.510 Max.
.510 Max.
.510 Max.
.510 Max.
.510 Max.
.510 Max.
.510 Max.
S
S
S
S
S
S
S
S
R
R
R
R
R
R
R
R
33
39
44
48
52
48
50
52
48
48
48
50
52
50
52
52
Ratio
To 1
2
3
4
6
8
9
10
12
12
15
16
20
24
30
32
36

For transducer shaft .1200/.1195, add "2" to the end of the part number. Example: S9111A-T642C30R2.
10
11
12
13
14
15
11-17
16
I
R

PAT. NO. 2,892,357
SPECIFICATIONS:
T
1
2
Inch

1
Precision
Component
Zero backlash, lower backlash, exact ratios,

etc., are available on special order.
For additional information, see preceding
technical data and special speed reducer pages.
3/8
.078
.093
.132
.040
.2500
.2495
.8750
.8745
1
1.437
4
5
6
7
8
9
10
11
12
13
14
15
16
INCH COMPONENT
CATALOG NUMBER
S9115A-T623-
1/2
1-1/2
#4-40 UNC-2B TAP
X .093 DP., 4 HOLES
EQUALLY SPACED
ON A 1.100 B.C.
1-3/16
1.312
1.3120
1.3115
SERVO
MOTOR

Model
No.
Ratio Rotation
To 1
7.91
9.17
10.15
13.29
14.08
15.39
18.00
20.62
25.71
29.45
29.81
33.00
34.14
37.80
43.20
45.75
49.48
50.00
52.40
57.27
58.50
67.00
76.74
83.57
95.71
96.89
107.25
109.62
110.97
122.83
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
S
S
S
S
S
S
S
S
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
S
S
S
S
S
S
S
Model
No.
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
Ratio Rotation
To 1
127.09
140.40
140.68
148.69
160.80
162.50
170.29
184.16
186.11
190.13
195.04
213.15
217.75
249.39
285.63
311.07
356.27
360.65
399.21
408.04
413.05
457.21
473.07
522.60
523.65
553.45
598.53
604.86
633.86
685.50
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
Model
No.
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
11-18
Ratio Rotation
To 1
692.75
707.69
725.96
793.40
810.51
928.28
1063.16
1010.98
1172.11
1297.43
1698.45
1798.71
1965.80
2299.98
3285.69
3763.10
3809.35
4216.64
4362.84
4829.31
5519.96
5845.79
6322.01
6388.85
6695.18
7317.14
7474.95
8561.05
R
R
R
R
R
R
R
S
S
S
S
S
S
S
R
R
R
R
R
R
R
R
R
R
R
R
R
R

PAT. NO. 2,892,357
SPECIFICATIONS:
Inch

1
Precision
Component
T
1

3/8
.078
.093
.132
.040
.2500
.2495
.8750
.8745
2
1
1.437
INCH COMPONENT
CATALOG NUMBER
S9115A-T623A-
1/2
1-1/2
#4-40 UNC-2B TAP
X .093 DP., 4 HOLES
EQUALLY SPACED
ON A 1.100 B.C.
SERVO
MOTOR
1-3/16
1.312
1.3120
1.3115

Example: S9115A-T623A-16 has a 43.19: 1 ratio.
Model
No.
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
Ratio Rotation
To 1
5.05
6.48
8.48
9.82
12.11
14.02
15.55
17.99
20.35
23.56
27.26
29.07
33.65
37.31
38.95
43.19
48.85
49.98
56.53
65.43
S
S
S
S
R
R
R
R
R
R
R
S
S
S
S
S
S
S
S
S
Model
No.
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
Ratio Rotation
To 1
75.73
69.78
80.76
89.55
93.47
103.64
108.19
117.23
119.96
135.68
138.84
157.04
181.76
210.37
193.83
224.34
248.75
259.65
287.90
300.52
S
R
R
R
R
R
R
R
R
R
R
R
R
R
S
S
S
S
S
S
Model
No.
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
Ratio Rotation
To 1
325.63
333.22
376.89
385.67
436.21
504.88
584.35
538.41
623.16
690.96
721.25
799.73
834.78
904.53
925.61
1046.91
1071.31
1211.71
1402.44
1623.19
S
S
S
S
S
S
S
R
R
R
R
R
R
R
R
R
R
R
R
R
7
8
9
10
11
12
13
14
15
11-19
16

HIGH-PRECISION
R
T
1
SPECIFICATIONS:

Inch
1
Precision
Component

data and special speed reducer pages.
3/8
.078
.093
.132
.040
.2500
.2495
.8750
.8745
1
1.437
Max. Output Torque

(ozf in.)
5
6
7
8
10
11
12
13
14
15
16
1.312
1.3120
1.3115
110
p)
.0080
.
OX
PR
MAX.
TORQU OUTPUT
E (ozf in
.)
.0060
T (h
U
INP
100
90
SERVO
MOTOR
1-3/16
AP
80
.0040
.0020
10 20 30 40 50 60 70 80 90 100
Output (rpm)
INCH COMPONENT
1/2
1-1/2
#4-40 UNC-2B TAP
X .093 DP., 4 HOLES
EQUALLY SPACED
ON A 1.100 B.C.
Catalog Number
Ratio
To 1
Rotation
Catalog Number
Ratio
To 1
Rotation
S9115A-P0020S3
S9115A-P0022R3
S9115A-P0025R3
S9115A-P0031R3
S9115A-P0036R3
S9115A-P0040R3
S9115A-P0047R3
S9115A-P0056R3
S9115A-P0068R3
S9115A-P0073R3
S9115A-P0082S3
S9115A-P0095S3
S9115A-P0115S3
S9115A-P0134S3
S9115A-P0148S3
S9115A-P0175S3
S9115A-P0209S3
S9115A-P0253S3
S9115A-P0271S3
S9115A-P0305R3
S9115A-P0372R3
S9115A-P0427R3
S9115A-P0497R3
19.57
22.02
25.39
30.84
35.88
39.84
46.97
56.04
67.98
72.84
81.95
94.50
114.78
133.54
148.28
174.82
208.59
253.03
271.13
305.02
372.09
427.24
497.07
S
R
R
R
R
R
R
R
R
R
S
S
S
S
S
S
S
S
S
R
R
R
R
S9115A-P0567R3
S9115A-P0676R3
S9115A-P0776R3
S9115A-P0942R3
S9115A-P1009R3
S9115A-P1135S3
S9115A-P1385S3
S9115A-P1590S3
S9115A-P1850S3
S9115A-P2109S3
S9115A-P2422S3
S9115A-P2849S3
S9115A-P3272S3
S9115A-P3757S3
S9115A-P4490R3
S9115A-P5155R3
S9115A-P5919R3
S9115A-P7137R3
S9115A-P8159R3
S9115A-P9369R3
S9115A-PA136R3
S9115A-PA398R3
566.72
676.20
776.42
941.82
1009.21
1135.36
1384.99
1590.27
1850.21
2109.44
2422.10
2849.28
3271.59
3756.50
4489.77
5155.23
5919.33
7137.54
8159.30
9368.65
11364.47
13982.51
R
R
R
R
R
S
S
S
S
S
S
S
S
S
R
R
R
R
R
R
R
R
11-20
Approx. Input (hp)

PAT. NO. 2,892,357
SPECIFICATIONS:
Inch

1
Precision
Component

2
3/8
.078
.093
.132
.040
.2500
.2495
.9375
.9370
3
1.165
1.750
1-13/16
INCH COMPONENT
CATALOG NUMBER
S9118A-T628-
1.5620
1.5615
#4-40 INC-2B TAP

X .093 DP., 4 HOLES
EQUALLY SPACED
ON A 1.250 B.C.
1/2
SERVO
MOTOR
1-5/32
1.625
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
Ratio Rotation
To 1
8.05
10.11
13.00
18.78
23.59
24.14
30.33
39.00
43.82
55.05
56.33
70.78
72.43
91.00
117.00
102.24
S
S
S
R
R
R
R
R
S
S
S
S
S
S
S
R
4
5
6
7

Model
No.
Model
No.
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
Ratio Rotation
To 1
128.45
131.44
165.15
169.00
212.33
217.29
273.00
351.00
238.55
299.71
306.70
385.35
394.33
495.44
507.00
637.00
R
R
R
R
R
R
R
R
S
S
S
S
S
S
S
S
Model
No.
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
Ratio Rotation
To 1
651.86
819.00
1053.00
556.61
699.33
715.64
899.14
920.11
1156.04
1183.00
1486.33
1521.00
1911.00
1955.57
2457.00
3159.00
S
S
S
R
R
R
R
R
R
R
R
R
R
R
R
R
8
9
10
11
12
13
14
15
11-21
16

HIGH-PRECISION
R
T
1
SPECIFICATIONS:

Inch

3/8
.078
.093
.132
.040
.2500
.2495
.9375
.9370
1.165
1.750
3
1-13/16
#4-40 UNC-2B TAP
X .093 DP., 4 HOLES
EQUALLY SPACED
ON A 1.250 B.C.
8
9
10
11
12
13
14
15
16
1.5620
1.5615
1/2
1-7/16
SERVO
MOTOR
1.625
Max. Output Torque
(ozf in.)
1
Precision
Component
140
130
120
110
100
)
hp
T(
PU
N
I
.
OX
PR
AP
MAX. O
UTPUT
(ozf in.) TORQUE
.0100
.0080
.0060
.0040
.0020
Approx. Input (hp)
10 20 30 40 50 60 70 80 90 100
Output (rpm)
INCH COMPONENT
Catalog Number
Ratio
To 1
Rotation
Catalog Number
Ratio
To 1
Rotation
S9118A-P0019S3
S9118A-P0022R3
S9118A-P0024R3
S9118A-P0028R3
S9118A-P0031R3
S9118A-P0037R3
S9118A-P0041R3
S9118A-P0047R3
S9118A-P0053R3
S9118A-P0060R3
S9118A-P0070S3
S9118A-P0078S3
S9118A-P0090S3
S9118A-P0100S3
S9118A-P0118S3
S9118A-P0133S3
S9118A-P0149S3
S9118A-P0182S3
S9118A-P0208S3
S9118A-P0223S3
S9118A-P0259R3
S9118A-P0290R3
S9118A-P0334R3
S9118A-P0380R3
18.78
21.82
24.14
28.17
31.30
36.86
41.31
46.54
52.76
60.29
70.06
77.51
90.42
100.47
118.34
132.63
149.41
181.72
207.65
222.78
258.91
290.33
334.17
379.93
S
R
R
R
R
R
R
R
R
R
S
S
S
S
S
S
S
S
S
S
R
R
R
R
S9118A-P0437R3
S9118A-P0515R3
S9118A-P0583R3
S9118A-P0667R3
S9118A-P0767R3
S9118A-P0857S3
S9118A-P0987S3
S9118A-P1111S3
S9118A-P1279S3
S9118A-P1404S3
S9118A-P1688S3
S9118A-P1908S3
S9118A-P2156S3
S9118A-P2464S3
S9118A-P2643S3
S9118A-P3168R3
S9118A-P3695R3
S9118A-P4106R3
S9118A-P4709R3
S9118A-P5420R3
S9118A-P6106R3
S9118A-P6922R3
S9118A-P7910R3
S9118A-P9104R3
437.32
514.62
583.41
666.68
767.36
857.16
986.61
1111.13
1278.94
1404.01
1688.20
1907.73
2155.93
2463.64
2643.14
3167.54
3695.47
4106.07
4708.85
5420.02
6105.55
6921.67
7909.59
9104.16
R
R
R
R
R
S
S
S
S
S
S
S
S
S
S
R
R
R
R
R
R
R
R
R
11-22
SPEED REDUCERS BU-ORD SIZE 11

PAT. NO. 2,892,357
SPECIFICATIONS:
Inch

1
Precision
Component

3/8

.050
.093
.062
.062
.1250
.1245
.6250
.6245
T
1
.064
.063
.050
7/8
1.062
1-1/8
#4-40 UNC-2B TAP
X .093 DP., 4 HOLES
EQUALLY SPACED
ON A .812 B.C.
1/2
.975
1.0000
.9995
3
35/64
1-27/64
4
5
INCH COMPONENT
CATALOG NUMBER
S9111A-T6017-
6
7

Model
No.
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
Ratio Rotation
To 1
5.29
6.83
9.00
10.44
11.89
13.80
15.38
17.84
20.25
23.50
27.27
26.76
31.05
34.59
36.04
40.15
45.56
46.59
52.88
61.36
71.21
60.21
69.87
S
S
S
S
R
R
R
R
R
R
R
S
S
S
S
S
S
S
S
S
S
R
R
Model
No.
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
Ratio Rotation
To 1
77.84
81.08
90.33
94.10
102.52
104.83
118.97
121.65
138.06
160.22
185.94
135.47
157.21
175.13
182.44
203.24
211.72
230.66
235.86
245.70
267.68
273.71
310.64
R
R
R
R
R
R
R
R
R
R
R
S
S
S
S
S
S
S
S
S
S
S
S
Model
No.
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
Ratio Rotation
To 1
317.64
360.50
418.35
485.50
304.80
353.72
394.04
410.49
457.29
476.37
518.99
530.68
552.83
602.28
615.85
641.55
698.94
714.69
811.12
829.39
941.30
1092.37
1267.69
S
S
S
S
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
8
9
10
11
12
13
14
15
11-23
16
OFFSET SPEED REDUCERS BU-ORD SIZE 11

R
T
1
SPECIFICATIONS:

Inch

#4-40 UNC-2B TAP

X .093 DP., 4 HOLES
EQ. SP. ON A .812 B.C.
7/8
7
8
9
10
11
12
13
14
1-1/8
9/16
1.0000
.9995
1.062
.6250
.6245
1-27/64
35/64
.271
.975
INCH COMPONENT
CATALOG NUMBER
Model
No.
Ratio Rotation
To 1
5.29
6.83
9.00
10.44
11.89
13.80
15.38
17.84
20.25
23.50
26.76
27.27
31.05
34.59
36.04
40.15
45.56
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
S
S
S
S
R
R
R
R
R
R
S
R
S
S
S
S
S
Model
No.
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
Ratio Rotation
To 1
46.59
52.88
60.21
61.36
69.87
71.21
77.84
81.08
90.33
94.10
102.52
104.83
118.97
121.65
135.47
138.06
157.21
S
S
R
S
R
S
R
R
R
R
R
R
R
R
S
R
S
Model
No.
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
15
16
.064
.063
.050
.050
.093
.062
.1250
.1245
3/8
1
Precision
Component
11-24
Ratio Rotation
To 1
160.22
175.13
182.44
185.94
203.24
211.72
230.66
235.86
245.70
267.68
273.71
310.64
317.64
360.50
418.35
485.50
R
S
S
R
S
S
S
S
S
S
S
S
S
S
S
S
ZERO-BACKLASH SPEED REDUCERS BU-ORD SIZE 11

PAT. NO. 3,396,594
SPECIFICATIONS:
Inch
Backlash: Zero with load torque less than Z-B torque limit
Z-B Torque Limit: Approximately 1/2 of the ratio (ozf in.)
Angular Compliance: .015/ozf in.
1
Precision
Component
T
1

2
3/8
.050
.093
.062
.062
.1250
.1245
.6250
.6245
.064
.063
.050
7/8
1.062
1-1/8
#4-40 UNC-2B TAP
X .093 DP., 4 HOLES
EQUALLY SPACED
ON A .812 B.C.
The S9111A-T6019 series is an extremely low backlash
Bu-Ord Size 11 speed reducer for servo applications.
All backlash components due to gear-induced factors
are eliminated. Hence, the name "Zero-Backlash Speed
Reducer" has been applied. The zero-backlash feature will
remain fully effective up to the Z-B torque limit. In the Size
11 units, the Z-B torque limit (in ozf in.) is approximately
1/2 of the ratio. If the load torque exceeds the Z-B torque
1/2
.975
1.0000
.9995
35/64
1-27/64
limit, backlash is introduced. The backlash will be

eliminated when the load torque decreases below
the Z-B limit. No permanent damage will occur
providing the load torque does not exceed the unit's
maximum rated torque. The angular compliance
(not to be confused with backlash) is approximately
1 arc minute per ounce inch.
INCH COMPONENT
CATALOG NUMBER
S9111A-T6019-
01
02
03
04
05
06
07
Ratio Rotation
To 1
5.29
6.83
9.00
10.44
11.89
13.80
15.38
S
S
S
S
R
R
R
7
8
9
10

Model
No.
Model
No.
08
09
10
11
12
13
14
Ratio Rotation
To 1
17.84
20.25
23.50
26.76
27.27
31.05
34.59
R
R
R
S
R
S
S
Model
No.
15
16
17
18
19
21
23
Ratio Rotation
To 1
36.04
40.15
45.56
46.59
52.88
61.36
71.21
S
S
S
S
S
S
S
11
12
13
14
15
11-25
16
I
R

PAT. NO. 2,892,357
SPECIFICATIONS:
T
1
2
Inch


3/8
.078
.093
.132
.040
.2500
.2495
.8750
.8745
.040
.132
.050
1
3
4
1
Precision
Component
1.437
INCH COMPONENT
CATALOG NUMBER
S9115A-T6023-
1-1/2
#4-40 UNC-2B TAP
X .093 DP., 4 HOLES
EQUALLY SPACED
ON A 1.100 B.C.
1/2
1.312
1.3120
1.3115
35/64
1-29/64

6
7
8
9
10
11
12
13
14
15
16
Model
No.
Ratio Rotation
To 1
7.91
9.17
10.15
13.29
14.08
15.39
18.00
20.62
25.71
29.45
29.81
33.00
34.14
37.80
43.20
45.75
49.48
50.00
52.40
57.27
58.50
67.00
76.74
83.57
95.71
96.89
107.25
109.62
110.97
122.83
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
S
S
S
S
S
S
S
S
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
S
S
S
S
S
S
S
Model
No.
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
Ratio Rotation
To 1
127.09
140.40
140.68
148.69
160.80
162.50
170.29
184.16
186.11
190.13
195.04
213.15
217.75
249.39
285.63
311.07
356.27
360.65
399.21
408.04
413.05
457.21
473.07
522.60
523.65
553.45
598.53
604.86
633.86
685.50
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
Model
No.
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
11-26
Ratio Rotation
To 1
692.75
707.69
725.96
793.40
810.51
928.28
1063.16
1010.98
1172.11
1297.43
1698.45
1798.71
1965.80
2299.98
3285.69
3763.10
3809.35
4216.64
4362.84
4829.31
5519.96
5845.79
6322.01
6388.85
6695.18
7317.14
7474.95
8561.05
R
R
R
R
R
R
R
S
S
S
S
S
S
S
R
R
R
R
R
R
R
R
R
R
R
R
R
R

PAT. NO. 2,892,357
SPECIFICATIONS:
Inch

1
Precision
Component


3/8
.078
.093
.132
.040
.2500
.2495
.8750
.8745
.040
.132
.050
2
1
1.437
INCH COMPONENT
CATALOG NUMBER
S9115A-T6023A-
1-1/2
#4-40 UNC-2B TAP
X .093 DP., 4 HOLES
EQUALLY SPACED
ON A 1.100 B.C.
1/2
1.312
1.3120
1.3115
35/64
1-29/64
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
Ratio Rotation
To 1
5.05
6.48
8.48
9.82
12.11
14.02
15.55
17.99
20.35
23.56
27.26
29.07
33.65
37.31
38.95
43.19
48.85
49.98
56.53
65.43
S
S
S
S
R
R
R
R
R
R
R
S
S
S
S
S
S
S
S
S
Model
No.
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
Ratio Rotation
To 1
75.73
69.78
80.76
89.55
93.47
103.64
108.19
117.23
119.96
135.68
138.84
157.04
181.76
210.37
193.83
224.34
248.75
259.65
287.90
300.52
4
5

Model
No.
S
R
R
R
R
R
R
R
R
R
R
R
R
R
S
S
S
S
S
S
Model
No.
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
Ratio Rotation
To 1
325.63
333.22
376.89
385.67
436.21
504.88
584.35
538.41
623.16
690.96
721.25
799.73
834.78
904.53
925.61
1046.91
1071.31
1211.71
1402.44
1623.19
S
S
S
S
S
S
S
R
R
R
R
R
R
R
R
R
R
R
R
R
6
7
8
9
10
11
12
13
14
15
11-27
16
I
R
SINGLE-END SPEED REDUCERS BU-ORD SIZE 15

PAT. NO. 2,943,507
SPECIFICATIONS:
T
1
2
Inch


5
6
7
8
9
10
11
12
13
14
15
16
.078
.2500
.2495
.1250
.1245
.8750
.8745
1.3120
1.3115
.093
.132
.040
OUTPUT
3
4
1
Precision
Component
INPUT
INCH COMPONENT
CATALOG NUMBER
S9115A-T6123-
15/32
1-17/64
1.437
#4-40 UNC-2B TAP X 1/8 DP

4 HOLES EQUALLY SPACED
ON A 1.103 B.C.
1.097
15/32

Model
No.
Ratio Rotation
To 1
7.91
9.17
10.15
13.29
14.08
15.39
18.00
20.62
25.71
29.45
29.81
33.00
34.14
37.80
43.20
45.75
49.48
50.00
52.40
57.27
58.50
67.00
76.74
83.57
95.71
96.89
107.25
109.62
110.97
122.83
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
S
S
S
S
S
S
S
S
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
S
S
S
S
S
S
S
Model
No.
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
Ratio Rotation
To 1
127.09
140.40
140.68
148.69
160.80
162.50
170.29
184.16
186.11
190.13
195.04
213.15
217.75
249.39
285.63
311.07
356.27
360.65
399.21
408.04
413.05
457.21
473.07
522.60
523.65
553.45
598.53
604.86
633.86
685.50
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
Model
No.
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
11-28
Ratio Rotation
To 1
692.75
707.69
725.96
793.40
810.51
928.28
1063.16
1010.98
1172.11
1297.43
1698.45
1798.71
1965.80
2299.98
3285.69
3763.10
3809.35
4216.64
4362.84
4829.31
5519.96
5845.79
6322.01
6388.85
6695.18
7317.14
7474.95
8561.05
R
R
R
R
R
R
R
S
S
S
S
S
S
S
R
R
R
R
R
R
R
R
R
R
R
R
R
R

PAT. NO. 2,943,507
SPECIFICATIONS:
Inch

1
Precision
Component


.078
.2500
.2495
.1250
.1245
.8750
.8745
1.3120
1.3115
.093
.132
OUTPUT
3
4
15/32
1-17/64
1.437
#4-40 UNC-2B TAP X 1/8 DP

ON A 1.103 B.C.
1.097
15/32

Model
No.
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
Ratio Rotation
To 1
5.05
6.48
8.48
9.82
12.11
14.02
15.55
17.99
20.35
23.56
27.26
29.07
33.65
37.31
38.95
43.19
48.85
49.98
56.53
65.43
S
S
S
S
R
R
R
R
R
R
R
S
S
S
S
S
S
S
S
S
.040
INPUT
INCH COMPONENT
CATALOG NUMBER
S9115A-T6123A-
5
6
Model
No.
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
Ratio Rotation
To 1
75.73
69.78
80.76
89.55
93.47
103.64
108.19
117.23
119.96
135.68
138.84
157.04
181.76
210.37
193.83
224.34
248.75
259.65
287.90
300.52
S
R
R
R
R
R
R
R
R
R
R
R
R
R
S
S
S
S
S
S
Model
No.
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
Ratio Rotation
To 1
325.63
333.22
376.89
385.67
436.21
504.88
584.35
538.41
623.16
690.96
721.25
799.73
834.78
904.53
925.61
1046.91
1071.31
1211.71
1402.44
1623.19
S
S
S
S
S
S
S
R
R
R
R
R
R
R
R
R
R
R
R
R
7
8
9
10
11
12
13
14
15
11-29
16
I
R

PAT. NO. 2,892,357
SPECIFICATIONS:
T
1
2
Inch


3/8
.078
.093
.132
.040
.2500
.2495
.9375
.9370
7
8
9
10
11
12
INCH COMPONENT
CATALOG NUMBER
S9118A-T6028-
#4-40 UNC-2B TAP

X 1/4 DP., 4 HOLES
EQUALLY SPACED
ON A 1.250 B.C.
1.5620
1.5615
1.628
1.622
35/64
1-27/64

Model
No.
Ratio Rotation
To 1
8.05
10.11
13.00
18.78
23.59
24.14
30.33
39.00
43.82
55.05
56.33
70.78
72.43
91.00
117.00
102.24
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
S
S
S
R
R
R
R
R
S
S
S
S
S
S
S
R
Model
No.
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
Ratio Rotation
To 1
128.45
131.44
165.15
169.00
212.33
217.29
273.00
351.00
238.55
299.71
306.70
385.35
394.33
495.44
507.00
637.00
R
R
R
R
R
R
R
R
S
S
S
S
S
S
S
S
Model
No.
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
13
14
15
16
1.175
1.160
1/2
1-13/16
.040
.132
.050
1.750
4
5
1
Precision
Component
11-30
Ratio Rotation
To 1
651.86
819.00
1053.00
556.61
699.33
715.64
899.14
920.11
1156.04
1183.00
1486.33
1521.00
1911.00
1955.57
2457.00
3159.00
S
S
S
R
R
R
R
R
R
R
R
R
R
R
R
R

PAT NO. 2,943,507
SPECIFICATIONS:
Inch

1
Precision
Component

T
1

.1250
.1245
.9375
.9370
1.5620
1.5615
.078
.2500
.2495
OUTPUT
.093
.132
.040
INPUT
4
INCH COMPONENT
CATALOG NUMBER
S9118A-T6128-
31/64
1-15/64
1.750
31/64
#4-40 UNC-2B TAP X 1/8

DP., 4 HOLES EQUALLY
SPACED ON A 1.250 B.C.

Model
No.
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
Ratio Rotation
To 1
8.05
10.11
13.00
18.78
23.59
24.14
30.33
39.00
43.82
55.05
56.33
70.78
72.43
91.00
117.00
102.24
S
S
S
R
R
R
R
R
S
S
S
S
S
S
S
R
Model
No.
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
Ratio Rotation
To 1
128.45
131.44
165.15
169.00
212.33
217.29
273.00
351.00
238.55
299.71
306.70
385.35
394.33
495.44
507.00
637.00
R
R
R
R
R
R
R
R
S
S
S
S
S
S
S
S
Model
No.
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
Ratio Rotation
To 1
651.86
819.00
1053.00
556.61
699.33
715.64
899.14
920.11
1156.04
1183.00
1486.33
1521.00
1911.00
1955.57
2457.00
3159.00
S
S
S
R
R
R
R
R
R
R
R
R
R
R
R
R
7
8
9
10
11
12
13
14
15
11-31
16
PRECISION SYNCHRO MOUNTING CLAMPS

MATERIAL:
R
T
303 Stainless Steel

Inch
SPECIFICATIONS:
Tolerances
Decimals
.005
Fractions
1/64
1
Precision
Component
.343 R
.375 R
.120
Fig. 1
1/8 R
.128
.005
.375
Fig. 2
.125
.128
.250
+.000
-.005
45
A .005
7/16 R
22.5
3/64 R
.156
.128
9
10
11
12
13
14
INCH COMPONENT
Catalog Number
302 Stainless Steel 2024-T351 Aluminum
Anodized
S3101Y-C001
S3101Y-C002
S3101Y-C003
S3101Y-C004
S3102Y-C009
S3102Y-C010
S3102Y-C011
S3102Y-C012
S3103Y-C017
S3103Y-C018
S3103Y-C019
15
16
Fig. 3
3/16
11-32
S3101Y-C005
S3101Y-C006
S3101Y-C007
S3101Y-C008
S3102Y-C013
S3102Y-C014
S3102Y-C015
S3102Y-C016
S3103Y-C020
S3103Y-C021
S3103Y-C022
Fig.
No.
+.000
-.005
1
1
1
1
2
2
2
2
3
3
3
.065
.095
.160
.220
.100
.131
.160
.288
.093
.156
.272
.020
.050
.115
.175
.052
.081
.109
.238
.047
.110
.210
COMMERCIAL SYNCHRO MOUNTING CLAMPS

MATERIAL:
303 Stainless Steel

2024-T351 Aluminum
R
Inch
SPECIFICATION:
Tolerances
Decimals
.010
Fractions
1/32
.343 R
T
1
.375 R
.120
Fig. 1
1/8 R
.128
.010
.375
Fig. 2
.125
.128
.250
+.000
-.010
45
A .010
7/16 R
22.5
3/64 R
Fig. 3
.156
3/16
.128
9
10
INCH COMPONENT
Catalog Number
303 Stainless Steel
S3101Y-J001
S3101Y-J002
S3101Y-J003
S3101Y-J004
S3102Y-J009
S3102Y-J010
S3102Y-J011
S3102Y-J012
S3103Y-J017
S3103Y-J018
S3103Y-J019
2024-T351
Aluminum
S3101Y-J005
S3101Y-J006
S3101Y-J007
S3101Y-J008
S3102Y-J013
S3102Y-J014
S3102Y-J015
S3102Y-J016
S3103Y-J020
S3103Y-J021
S3103Y-J022
Fig.
No.
+.000
-.010
1
1
1
1
2
2
2
2
3
3
3
.065
.095
.160
.220
.100
.131
.160
.288
.093
.156
.272
.020
.050
.115
.175
.052
.081
.109
.238
.047
.110
.210
11
12
13
14
15
11-33
16

MATERIAL:
302 Stainless Steel

Inch
45
5/8 R
3/64 R
1
Precision
Component
1
2
3
4
I.D.
.093 R
INCH COMPONENT
Catalog Number
Aluminum
302 Stainless Steel 2024-T351
Anodized
S3104Y-C023
S3104Y-C024
MATERIAL:
.005
I.D.
.128
.040
.200
303 Stainless Steel
I.D.
6
INCH COMPONENT
7
8
Catalog Number
.005
+.000
-.005
B
Dia.
C
Dia.
S3105Y-C137
S3105Y-C138
S3105Y-C139
S3105Y-C140
.099
.099
.099
.099
.057
.088
.104
.117
.180
.180
.180
.180
.250
.250
.250
.250
.035
.035
.035
.035
.156
.156
.156
.156
I.D.
9
MATERIAL:
10
303 Stainless Steel

11
I.D.
SPECIFICATIONS:
Tolerances
.005
Decimals
1/64
Fractions
C
B
12
13
14
15
16
INCH COMPONENT
Catalog Number
303 Stainless Steel
S3106Y-C035
S3106Y-C036
S3106Y-C037
S3106Y-C038
11-34
2024-T351 Aluminum
Anodized
S3106Y-C039
S3106Y-C040
S3106Y-C041
S3106Y-C042
.005
+.000
-.005
C
Dia.
.103
.127
.127
.127
.045
.045
.045
.045
.105
.156
.217
.247
.187
.250
.310
.370
I.D.

MATERIAL:
303 Stainless Steel

2024-T351 Aluminum
R
45
Inch
5/8 R
3/64 R
B
I.D.
.093 R
INCH COMPONENT
Catalog Number
303 Stainless Steel
S3104Y-J023
I.D.
2024-T351
Aluminum
+.000
-.010
.128
.040
.200
S3104Y-J024
MATERIAL:
3
4
303 Stainless Steel
E D
C
I.D.
INCH COMPONENT
I.D.
Catalog Number
+.010
-.000
B
Dia.
C
Dia.
S3105Y-J137
S3105Y-J138
S3105Y-J139
S3105Y-J140
.099
.099
.099
.099
.057
.088
.104
.117
.180
.180
.180
.180
.250
.250
.250
.250
.035
.035
.035
.035
7
8
9
MATERIAL:
303 Stainless Steel

2024-T351 Aluminum
SPECIFICATIONS:
Tolerances
Decimals
.010
Fractions
1/32
10
I.D.
11
C
B
12
INCH COMPONENT
Catalog Number
303 Stainless Steel
S3106Y-J035
S3106Y-J036
S3106Y-J037
S3106Y-J038
2024-T351
Aluminum
S3106Y-J039
S3106Y-J040
S3106Y-J041
S3106Y-J042
I.D.
+.010
-.000
+.010
-.000
C
Dia.
.103
.127
.127
.127
.038
.038
.038
.038
.105
.156
.217
.247
.187
.250
.310
.370
11-35
13
14
15
16

MATERIAL:
Stainless Steel
SPECIFICATION:
Inch
Tolerances
Decimals
.005
1
Precision
Component
1
D
+.000
A -.005
I.D.
F
C
4
5
6
INCH COMPONENT
Catalog Number
I.D.
S3107Y-C030
S3107Y-C031
S3107Y-C034
.125
.125
.104
.078
.078
.122
.312
.218
.156
.375
.328
.203
.123
.118
.187
.078
.062
.047
.182
.172
.125
7
8
ADJUSTABLE
MATERIAL:
303 Stainless Steel, Black Oxide Finish
9
10
SPECIFICATIONS:
Tolerances
Decimals
.005
Fractions
1/64
B
11
11/64 R
1/32 R
G
12
13
14
15
16
E
7/64 R
INCH COMPONENT
R (TYP)
Catalog Number
S3108Y-C032
S3108Y-C033
.096
.153
5/16
5/16
33/64
33/64
.125
.125
5/64
5/64
.050
.050
15/64
15/64
.118
.118
11-36

MATERIAL:
Stainless Steel
SPECIFICATION:
Inch
Tolerances
Decimals
.010
T
1
+.000
A -.010
E
I.D.
F
C
4
INCH COMPONENT
Catalog Number
I.D.
S3107Y-J030
S3107Y-J031
S3107Y-J034
.125
.125
.104
.078
.078
.122
.312
.218
.156
.375
.328
.203
.123
.118
.187
.078
.062
.047
.182
.172
.125
5
6
7
ADJUSTABLE
MATERIAL:
303 Stainless Steel
SPECIFICATIONS:
Tolerances
Decimals
.010
Fractions
1/32
10
B
11/64 R
R (TYP)
12
E
7/64 R
INCH COMPONENT
11
1/32 R
G
13
Catalog Number
S3108Y-J032
S3108Y-J033
.096
.153
5/16
5/16
33/64
33/64
.125
.125
5/64
5/64
.05
.05
15/64
15/64
.118
.118
11-37
14
15
16
SINTERED SYNCHRO MOUNTING CLAMPS

PATENTED
QUICK RELEASING
SELF-LOCKING
INSTANT NULLING
R
Inch
For Material Specifications

See Following Page
1
Precision
Component
T
1
Mounting Methods
2
.031
3
A
.068 MAX.
.390
.385
C
.125
MS 35233
#4-40
UNC-2A
PAN HD.
.010 (REF.)
E
D SCREW NOT SUPPLIED

LENGTH TO SUIT WALL
THICKNESS
.010 (REF.)
MS 35234
10
(REF.)
.078
.156 R
NYLON
INSERT
.068 MAX.
Fig. 1
Synclamp (1/2 Turn)
.194 R
8.5 (REF.)
NYLON .170
INSERT MAX.
.178 R
.100
F
G
.062 R
#4-48 UNF-2A
X 5/16 LG.
SLOTTED
PAN HD.
.200
Fig. 1
* S3109Y-CS-01
* S3109Y-CS-02
* S3109Y-CS-03
* S3109Y-CS-04
* S3109Y-CS-05
* S3109Y-CS-06
* S3109Y-CS-07
* S3109Y-CS-08
* S3109Y-CS-09
* S3109Y-CS-10
* S3109Y-CS-11
* S3109Y-CS-12
Fig. 2
S3109Y-CS-22
INCH COMPONENT
G
Screw
MS
Dash
No.
.003
.003
F
Ref.
SYNCLAMP
SYNCLAMP
SYNCLAMP
SYNCLAMP
SYNCLAMP
SYNCLAMP
SYNCLAMP
SYNCLAMP
SYNCLAMP
SYNCLAMP
SYNCLAMP
SYNCLAMP
.031
.062
.062
.062
.078
.093
.093
.093
.125
.156
.225
.250
.040
.040
.050
.063
.063
.040
.050
.063
.050
.040
.063
.063
.071
.102
.112
.125
.141
.133
.143
.156
.175
.196
.288
.312
5/16
5/16
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
7/16
5/8
-14
-14
-15
-15
-15
-15
-15
-15
-15
-15
-16
-18
MS
.093
.037
.130
5/16
-14
Type
Fig. 2
MS (1/4 Turn)
Catalog Number
+0
-1/32
9
10
11
12
13
14
* For Phillips Head Screws, add "P" to the end of the catalog number
For #4-40 Thread, add "-40" for Pan Head Screws, or "-40P" for Phillips Head Screws, to the end of catalog number.
15
11-38
REV: 8.23.12 mh
16
SINTERED SYNCHRO MOUNTING CLAMPS

PATENTED
QUICK RELEASING
SELF-LOCKING
INSTANT NULLING
R
Inch
MATERIAL:
Clamp - Sintered Stainless Steel, Type 316

Screw - Slotted Pan Head *, CRES, Per MS-35233 And MS-35234
Insert - Nylon (Polyamide), Type 1, Per MIL-M20693, Natural Color (High Temp Zytel 103)
Finish - Screw-Treat Per MIL-S-5002, Clamp-As Cast And Tumbled
1
Precision
Component
T
1
* For Phillips Pan Head Screws per MS51957 And MS51958, Add "P" to the end of catalog number.
.053 MAX.
.265
.260
MS 35233
.091
MS 35233
#2-56
UNC-2A
PAN HD.
.010 (REF.)
E
13
(REF.)
NYLON
INSERT
.010
(REF.)
TURNING
RADIUS
CLEAR
BOTTOM
OF GROOVE
.152
+.000
-.005
C
Fig. 3
Mini (1/2 Turn)
.053
MAX.
F
G
.187 CLEARANCE
RADIUS
.046 R
MIN.
.128
#2-56
UNC-2A
PAN-HD.
14 (REF.)
10 (REF.)
NYLON
INSERT
.174
.169
.625
.615
7/8
.032 MAX.
12.5
#10-32 (REF.)
UNC-2A
PAN HD.
MS 35234-66
.015 (REF.)
E
NYLON
INSERT
.010
(REF.)
E
C
C
Fig. 5
Super (1/2 Turn)
.390
.385
.125
.187
10
(REF.)
#4-40 UNC-2B
Fig. 6
Rever (No Screw Supplied - 1/2 Turn)
Fig. 5
Type
.003
.003
F
Ref.
+0
-1/32
Screw
MS
Dash
No.
S3109Y-CS-31
S3109Y-CS-32
S3109Y-CS-33
S3109Y-CS-34
S3109Y-CS-35
MINI
MINI
MINI
MINI
MINI
.031
.047
.062
.093
.125
.040
.040
.040
.040
.040
.071
.087
.102
.133
.165
1/4
1/4
1/4
5/16
5/16
-3
-3
-3
-4
-4
S3109Y-CS-41
S3109Y-CS-42
S3109Y-CS-43
MICRO
MICRO
MICRO
.031
.046
.062
.031
.031
.031
.062
.077
.093
1/4
1/4
1/4
-3
-3
-3
SUPER
.250
.187
.437
7/8
-66
REVER
REVER
.062
.093
.063
.063
.125
.156
S3109Y-CS-51
Fig. 6
S3109Y-CS-61
S3109Y-CS-62
Screw Not Supplied
.005
8
9
Fig. 3
Fig. 4
INCH COMPONENT
Catalog Number
Fig. 4
Micro (1/4 Turn)
.110 MAX.
11-39
10
11
12
13
14
15
16
SYNCHRO MOUNTING CLAMPS

MATERIAL:
R
T
300 Series Stainless Steel,

Black Oxide
* S3001Y-C156 is 300 Series
Stainless Steel. This part is
the same as catalog number
S3001Y-MS17183-4 below.
Inch
D
C - CAPTIVE SCREW
INCH COMPONENT
1
2
A
B
Precision
Component
Catalog Number
S3001Y-C141
S3001Y-C142
* S3001Y-C156
13/32
13/32
.61
.031
.031
.062
#4-48
#4-48
#6-40
.062
.093
.255
.172
.172
1/4
5/16
5/16
15/32
9/32
9/32
3/8
3/16
3/16
1/4
MATERIAL:
A
E
D
C - CAPTIVE SCREW
INCH COMPONENT
7
8
9
Catalog Number
S3001Y-MS17183-1
S3001Y-MS17183-2
S3001Y-MS17183-3
S3001Y-MS17183-4
S3001Y-MS17183-5
.40
.40
.61
.61
.61
.037
.037
.062
.062
.062
#4-48
#4-48
#6-40
#6-40
#6-40
.067
.101
.130
.255
.165
11/64
11/64
1/4
1/4
1/4
5/16
5/16
15/32
15/32
15/32
9/32
9/32
3/8
3/8
3/8
3/16
3/16
1/4
1/4
1/4
10
11
INCH COMPONENT
Catalog Number
12
13
14
15
16
D
.042
Carbon Steel, Cadmium Plated

S3000Y-C025
0 (flat)
S3000Y-C026
.047
302 Stainless Steel
S3000Y-C025S
0 (flat)
S3000Y-C026S
.047
S3000Y-C027S
.078
S3000Y-C028S
.110
S3000Y-C029S
.141
Special clamps available on request.
11-40
.281
.141
.062 R
+.000
.125 -.005
.172
1/64 R
.141
.093
D
.187
CLAMPS
GEARHEAD ATTACHING CLAMPS
MATERIAL:
302 Stainless Steel, .025 thick
Inch
Special clamps are available on request.
1
Precision
Component
T
1
2
C MAX.
CAP SCREW
3
B MAX.
A
45
D MAX.
INCH COMPONENT
Catalog Number
Size
Number
S3808Y-C132
S3811Y-C133
S3815Y-C134
S3818Y-C135
8
11
15
18
1/16
7/64
5/64
1/8
.582
.804
.980
1.150
D
Dia.
Screw
Size
.230
.230
.230
.227
.818
1.135
1.505
1.830
.134
.134
.134
.134
#2-56
#4-40
#4-40
#4-40
6
7
8
9
PRECISION SYNCHRO LOCKING CLAMPS

MATERIAL:
416 Stainless Steel
10
SPECIFICATION:
Tolerances
Decimals
.005
.625
.090
.159
.153
INCH COMPONENT
.1200
.1195
.250
.032
.440
.125
.250
.190
11
# 2-56 SOC.
HD. CAP
SCREW
12
.095
13
Catalog Number
14
S3900Y-C136
NOTE: Used to lock Size 11 Synchro
Output Shaft to mounting plate
after desired setting is obtained.
15
11-41
16
PLANETARY GEAR SYSTEM

R
Planetary Gear System
T
Inch
Internal Gear C, zc
Planet Gear B, zb
Carrier D
2
Sun Gear A, za
3
4
5
The basic form of planetary gear system is shown above. It consists of a sun gear A, planetary gears B, internal gear C
and carrier D. In our gearheads the internal gear is fixed, the sun gear is the input pinion, and the output shaft is part of
the carrier.
C (Fixed)
This relationship can be

represented schematically
as shown on the right.
The speed ratio is
given by the equation:
B
D
6
7
8
z
1+ a

zc
za + zc
z
Gear Ratio =
=
= c + 1
z
za
za
a
zc
where: za = number of teeth in sun gear A, and
zc = number of teeth in internal gear C.
For the example shown in the above illustration

(where za = 14, zb = 18 and zc = 50), the Gear Ratio is 4.6:1.
For a double-stage planetary gearhead, the carrier of the first
stage becomes the sun gear of the second stage.
The advantages of the planetary gearheads are:
1. The input and output axes are in the same line.
2. The planet gears used in a planetary system share the
load, allowing for a much higher torque capacity unit
than the comparable size spur gearheads.
3. The unit is compact and inertially balanced.
The disadvantages are:
1. The mechanism is complex.
2. The components require high-precision manufacturing.
3. The cost is considerably more than comparable size spur
gearheads.
USEFUL FORMULAS
10
11
12
13
14
The maximum output

(Maximum continuous torque) x (Maximum rated output rpm)
=
hp of Gearhead
63025
The maximum allowable
output hp of the motor
The maximum output hp of gearhead

0.90 (single stage) or 0.85 (double stage)

load inertia
gearhead
=
+

(gear ratio)2
inertia

For very fast response, the effective inertia should be one to three times
larger than the motor inertia (including the pinion).
Effective inertia
pinion
inertia
For acceptably fast response, the effective inertia should be less than ten times

larger than the motor inertia (including the pinion).
Inertia values shown in this catalog include both the gearhead and pinion values.
15
16
11-42
PLANETARY GEARHEAD TYPES

R
Inch
T
1
2
3
TRUE PLANETARY
SPUR GEAR
HYBRID
4
How to choose the type of gearhead depends primarily on the application. Some of the factors to be considered to make
proper trade-offs between cost and performance are shown below. The hybrid design of planetary and spur gears are
not offered by us but are available on the market, and are included for comparison purposes.
DESIGN
FACTORS
GEARHEAD TYPE
5
6
Planetary
Low Cost
Planetary
Spur
Hybrid
Torque
Capacity
High
Medium
Low
Medium
limited by spur gear
pair strength
Load Sharing
Yes
Yes
No
Planetary
Section Only
Power to Weight
Ratio
High
Medium
Low
Medium
Power to
Size Ratio
High
Medium
Low
Medium
Torsional
Stiffness
High
Medium
Low
Medium
Backlash
Low
6-10 minutes
Medium
7-14 minutes
High
30 min. max.
Medium
Available
Number of Gear
Ratios
Low
Low
High
Medium
12
Cost
High
Medium
Low
Medium
13
10
11
14
15
11-43
16
NEMA SIZE PLANETARY AND SPUR GEARHEADS

R
Inch
+.0000
A -.0005
F, 4 HOLES
EQUALLY SPACED
3
4
NEMA size gearheads are designed to mate with the motors that conform to the dimensions established by the
NATIONAL ELECTRICAL MANUFACTURING ASSOCIATION (NEMA) for stepping motors. These dimensions are given
in the table below. For non-NEMA size stepping motors, brushless DC, brush and servo motors, special mounting
interfaces may be obtained at nominal charges. Please consult our application engineering department.
NEMA Motor Mounting Dimensions

Item
6
7
A
B
C
D
E
F
Mating Gearhead
G
Dimension
Motor Shaft Diameter
Motor Shaft Length
Pilot Diameter
Pilot Length
Mounting Bolt Circle
Bolt Hole Size
Size 17 *
Size 23
Size 34
Size 42
.1968
.945
.866
.080
1.725
4-40 UNC
.250
.810
1.500
.094
2.625
.20
#10-24 UNC
x .380 DP.
1.856
.375
1.250
2.875
.094
3.875
.22
#10-24 UNC
x .380 DP.
2.740
.625
1.380
2.186
.094
4.950
.281
1/4-20 UNC
x .50 DP.
3.500
.125
Mounting Hole
Bolt Hole Distance
1.220
Dimensions can be less than indicated.

* These sizes not included in NEMA standards
10
USEFUL FORMULAS
11
The maximum output

hp of gearhead
12
The maximum allowable output

hp of the motor
13
Effective inertia
14
15
16
(Maximum continuous torque) x (Maximum rated output rpm)

63025
The maximum output hp of gearhead
.90 (single stage) or .85 (double stage)
load inertia
(gear ratio) 2
gearhead
inertia
pinion
inertia
For very fast response, the effective inertia should be one to three times larger than the motor inertia
(including the pinion).
For acceptably fast response, the effective inertia should be three to ten times larger than the motor inertia
(including the pinion).
11-44
SELECTION CHART
NEMA SIZE INLINE PLANETARY GEARHEADS
R
NEMA
Size
Inline Planetary Gearheads

CG, Compact Series S9117A-CG...
(pg. 11-52)
17
PG, Precision Series, Low Backlash S9117A-PG...

(pg. 11-55)
EG, Economy Series, Low Backlash S9117A-EG...
(pg. 11-59)
Inch
Hybrid Stepper Motors
Single- or Double-Ended
Shafts
0
.9 Step Angle S9117MM...
(pg. 14-11)
1.8 Step Angle S9117M-...HT
(pg. 14-11)
RTX, Precision Series, Standard-Duty S9123A-RTX...

(pg. 11-49)
23

(pg. 11-56)
EG, Economy Series, Low-Backlash S9123A-EG...
(pg. 11-60)
80V DC Max. Drive S9123M-...HT..

(pg. 14-13)
160V DC Max. Drive S9123M-...
(pg. 14-15)
PRX, Precision Series, Heavy-Duty S9134A-PRX...

(pg. 11-48)
RTX, Precision Series, Standard-Duty S9134A-RTX...

(pg. 11-50)
34

(pg. 11-61)

(pg. 14-17)
160V DC Max. Drive, Heavy-Duty
S9134M-...HT (pg. 14-19)
T-Series S9134T-...
(pg. 11-68)
T-Series S9142T-...
(pg. 11-70)
11

(pg. 11-58)
42
10
Spur Gearheads (Planetary Gearhead Alternative)

Low-Cost & Long-Life S9134A-SG... (pg. 11-73)

(pg. 11-62)
4
5

Low Cost & Long Life S9123A-SG... (pg. 11-72)

(pg. 11-57)
T-Series S9123T-...
(pg. 11-66)

(pg. 11-54)
PRX, Precision Series, Heavy-Duty S9123A-PRX...

(pg. 11-47)

(pg. 11-53)

(pg. 14-21)
12
13

Low-Cost & Long-Life S9142A-SG... (pg. 11-74)
14
15
11-45
16
I
R
PRX & RTX PLANETARY GEARHEADS

NEMA Inch: 23 & 34 & Metric: 60 & 90
Radial and Axial Output Shaft Loading Specifications
PRX TYPE (HEAVY-DUTY)
Radial Load (lbf)
0.2
0.508
0.4
0.6
0.8
1.0
1.2
1.016
1.524
2.032
2.54
3.048
Load Distance From Mount Face (in.)
(cm)
1800
1600
1400
1200
1000
800
600
400
200
0
816.5
725.7
635
544.3
453.6
362.9
272.2
181.4
90.72
0.2
0.508
0.4
0.6
0.8
1.0
1.2
1.016
1.524
2.032
2.54
3.048
(cm)
1.4
3.556
RTX TYPE (STANDARD-DUTY)

136.1
250
113.4
200
90.72
150
68.04
100
45.36
50
22.68
11
NEW
13
14
Radial Load (lbf)
12
800
700
600
500
400
300
200
100
0
15
16
11-46
0.2
0.508
0.4
0.6
0.8
1.0
1.2
1.016
1.524
2.032
2.54
3.048
(cm)
034/090 RTX Bearing Radial Load Limits
0.2
0.508
0.4
0.6
0.8
1.0
1.2
1.016
1.524
2.032
2.54
3.048
(cm)
1.4
3.556
362.9
317.5
272.2
226.8
181.4
136.1
90.72
45.36
1.4
3.556
kgf
10
Radial Load (lbf)
300
kgf
023/060 RTX Bearing Radial Load Limits
1
KEY
50 rpm
125 rpm
250 rpm
500 rpm
1000 rpm
2000 rpm
1.4
3.556
034/090 PRX Bearing Radial Load Limits
4
5
362.9
317.5
272.2
226.8
181.4
136.1
90.72
45.36
kgf
800
700
600
500
400
300
200
100
0
kgf
Radial Load (lbf)
T
1
Inch
023/060 PRX Bearing Radial Load Limits
The graphs display

allowable radial load
at a given distance
from the gearhead
face based on an L10
bearing life of;
20,000 hours (PRX),
15,000 hours (RTX)
PRX PLANETARY GEARHEADS NEMA SIZE 23

PRECISION SERIES
SINGLE & DOUBLE STAGE
HEAVY-DUTY
R
Inch
MATERIAL:
Housing - Stainless Steel

Mounting Flanges - Red Anodized Aluminum (Front)
Aluminum (Back)
Output Shafts - Stainless Steel
Gears - Alloy and Stainless Steel
Bearings - Ball and Angular Contact Bearings
1
Precision
Component
T
1
FEATURES:
Standard NEMA sizes.

High torque design with optimized gear geometry.
High torsional stiffness.
Sealed to extend service life.
Captive, bearing supported input pinion.
Simplified quick installation.
Single-piece construction.
Alloy steel square key is supplied.
3
4
SPECIFICATIONS:
Max. Input Speed: 6500 rpm

For NEMA motor mounting
Shaft Loading:
dimensions, see page 11-44.
Axial: 500 lbf. Value shown is for loads into the gearhead
face. For loads away from the face, reduce by 50%
Radial: See graph on page: 11-46
Min. Efficiency:
+.000
#10-24 UNC-28 x .380 DP.(4 HOLES)
Single Stage: 95% 1.500 -.002
EQ. SP. ON A 2.625 B.C.
.125 +.001
Double Stage: 90%
-.000
L
Backlash:
.250
2.95
Single Stage: 4 arc min.
.75
Double Stage: 6 arc min.
.047
Operating Temperature:
-40F to +250F
+.0000
.500 -.0005
Weight:
Single Stage: 2.8 lb.
Double Stage: 3.8 lb.
Torsional Stiffness:
.062
1.504
20 lbf in./arc min.
2.25
1.502 x .12 DP.
1.25
SQUARE .205 (4 HOLES)
EQ. SP. ON A 2.625 B.C.
INCH COMPONENT
Catalog Number
Gear
Ratio
S9123A-PRX004
S9123A-PRX005
S9123A-PRX007
S9123A-PRX010
S9123A-PRX016
S9123A-PRX020
S9123A-PRX025
S9123A-PRX028
S9123A-PRX035
S9123A-PRX040
S9123A-PRX050
S9123A-PRX070
S9123A-PRX100
4:1
5:1
7:1
10:1
16:1
20:1
25:1
28:1
35:1
40:1
50:1
70:1
100:1
L
Max.
3.23
Single
Stage
4.38
Double
Stage
Max. Rated
Continuous
Torque
lbf in.
420
360
250
165
420
420
360
420
360
420
360
286
192
Max.
Momentary
Torque
lbf in.
530
455
315
210
530
530
455
530
455
530
455
360
241
Max.
Stopping
Torque
lbf in.
1069
1043
964
720
1069
1069
1043
1069
1043
1069
1043
964
720
Gearhead
Moment
of Inertia*
ozf in. sec2
2.190 x 10-3
1.887 x 10-3
1.661 x 10-3
1.547 x 10-3
1.852 x 10-3
1.670 x 10-3
1.659 x 10-3
1.551 x 10-3
1.545 x 10-3
1.493 x 10-3
1.490 x 10-3
1.488 x 10-3
1.487 x 10-3
* Values shown include pinion, clamp and sleeve and are for standard NEMA mountings. Efficiency rated at 3000 rpm
input speed, at nominal rated torque. All torque ratings are based upon 3000 rpm nominal input speed and 20,000 hours
minimum service life.
11-47
5
6
7
8
9
10
11
NEW
12
13
14
15
16
I
R
T
1
2
3
4
PRX PLANETARY GEARHEADS NEMA SIZE 34

PRECISION SERIES
SINGLE & DOUBLE STAGE
HEAVY-DUTY
Inch
MATERIAL:

Aluminum (Back)
Bearings - Ball and Angular Contact Bearings
1
Precision
Component
FEATURES:


Shaft Loading:
Axial: 750 lb. Value shown is for loads into the gearhead
Min. Efficiency:
+.000
#10-24 UNC-28 x .380 DP.(4 HOLES)
Single Stage: 95%
2.875 -.002
+.001
EQ. SP. ON A 3.875 B.C.
Double Stage: 90%
.188 -.000
L
Backlash:
.375
4.58
(TYP)
.98
.081
-40F to +250F
.75 +.0000
Weight:
-.0005
.062
80 lbf in./arc min.
2.879
3.45
2.877 x .22 DP.
1.50
EQ. SP. ON A 3.875 B.C.
SPECIFICATIONS:
5
6
7
8
9
10
11
NEW
12
13
14
15
16
INCH COMPONENT
Catalog Number
Gear
Ratio
S9134A-PRX004
S9134A-PRX005
S9134A-PRX007
S9134A-PRX010
S9134A-PRX016
S9134A-PRX020
S9134A-PRX025
S9134A-PRX028
S9134A-PRX035
S9134A-PRX040
S9134A-PRX050
S9134A-PRX070
S9134A-PRX100
4:1
5:1
7:1
10:1
16:1
20:1
25:1
28:1
35:1
40:1
50:1
70:1
100:1
L
Max.
4.73
Single
Stage
6.50
Double
Stage
Max. Rated
Continuous
Torque
lbf in.
1487
1328
895
580
1487
1487
1328
1487
1328
1487
1328
1029
674
Max.
Momentary
Torque
lbf in.
1874
1674
1128
732
1874
1874
1674
1874
1674
1874
1674
1297
849
Max.
Stopping
Torque
lbf in.
3548
3481
2954
2564
3548
3548
3481
3548
3481
3548
3481
2954
2564
Gearhead
Moment
of Inertia*
ozf in. sec2
1.554 x 10-2
1.310 x 10-2
1.117 x 10-2
1.018 x 10-2
1.303 x 10-2
1.149 x 10-2
1.139 x 10-2
1.036 x 10-2
1.030 x 10-2
9.778 x 10-3
9.753 x 10-3
9.734 x 10-3
9.724 x 10-3
* Values shown include pinion, clamp and sleeve and are for standard NEMA mountings. Efficiency rated at 3000 rpm
input speed, at nominal rated torque. All torque ratings are based upon 3000 rpm nominal input speed and 20,000
hours minimum service life.
11-48
RTX PLANETARY GEARHEADS NEMA SIZE 23

PRECISION SERIES
SINGLE, DOUBLE & TRIPLE STAGE
STANDARD-DUTY
MATERIAL:
R
Inch

Aluminum (Back)
Bearings - Ball, High Strength Steel
1
Precision
Component
T
1
FEATURES:

2
3
SPECIFICATIONS:

Shaft Loading:
#10-24 UNC-28 x .380 DP.(4 HOLES)
Min. Efficiency:
+.000
EQ. SP. ON A 2.625 B.C.
1.500 -.002
Single Stage: 95%
+.001
L
.125 -.000
Double Stage: 90%
.250
Triple Stage: 85%
2.95
.75
Backlash:
.047
(TYP)
+.0000
.500 -.0005
Triple Stage: 8 arc min.
-40F to +250F
Weight:
.062
1.504
2.25
1.502 x .12 DP.
1.25
EQ. SP. ON A 2.625 B.C.
Triple Stage: 4.7 lb.
* Values shown include pinion, clamp and sleeve and are for standard NEMA mountings.
15 lbf in./arc min.
Efficiency rated at 3000 rpm input speed, at nominal rated torque. All torque ratings are
based upon 3000 rpm nominal input speed and 15,000 hours minimum service life.
INCH COMPONENT
Catalog Number
Gear
Ratio
S9123A-RTX004
S9123A-RTX005
S9123A-RTX007
S9123A-RTX010
S9123A-RTX016
S9123A-RTX020
S9123A-RTX025
S9123A-RTX028
S9123A-RTX035
S9123A-RTX040
S9123A-RTX050
S9123A-RTX070
S9123A-RTX100
S9123A-RTX160
S9123A-RTX280
S9123A-RTX400
S9123A-RTX500
S9123A-RTX700
4:1
5:1
7:1
10:1
16:1
20:1
25:1
28:1
35:1
40:1
50:1
70:1
100:1
160:1
280:1
400:1
500:1
700:1
L
Max.
3.39
Single
Stage
4.28
Double
Stage
5.17
Triple
Stage
Max. Rated
Continuous
Torque
lbf in.
395
340
231
150
395
395
340
395
340
395
340
265
175
395
395
395
340
265
Max.
Momentary
Torque
lbf in.
468
400
280
190
468
468
400
468
400
468
400
320
221
468
468
468
400
320
Max.
Stopping
Torque
lbf in.
947
926
861
720
947
947
926
947
926
947
926
861
720
947
947
947
926
861
Gearhead
Moment
of Inertia*
ozf in. sec2
1.861 x 10-3
1.676 x 10-3
1.536 x 10-3
1.464 x 10-3
1.702 x 10-3
1.574 x 10-3
1.567 x 10-3
1.484 x 10-3
1.481 x 10-3
1.439 x 10-3
1.437 x 10-3
1.436 x 10-3
1.435 x 10-3
1.437 x 10-3
1.435 x 10-3
1.435 x 10-3
1.435 x 10-3
1.435 x 10-3
11-49
4
5
6
7
8
9
10
11
NEW
12
13
14
15
16
I
R
T
1
RTX PLANETARY GEARHEADS NEMA SIZE 34

PRECISION SERIES
SINGLE, DOUBLE & TRIPLE STAGE
STANDARD-DUTY
MATERIAL:
Inch

Aluminum (Back)
Bearings - Ball, High Strength Steel
1
Precision
Component
FEATURES:
2
3
4
5
6
7
8
9
10
11
NEW
12
13
14
15
16

SPECIFICATIONS:

Shaft Loading:
#10-24 UNC-28 x .380 DP. (4 HOLES)
Min. Efficiency:
+.000
EQ. SP. ON A 3.875 B.C.
+.001
Single Stage: 95% 2.875 -.002
.188 -.000
L
Double Stage: 90%
.375
Triple Stage: 85%
4.58
.980
Backlash:
(TYP)
.081
+.000
.750 -.0005
-40F to +250F
Weight:
.062
2.879
3.45
2.877 x .22 DP.
1.50
Double Stage: 13 lb.
EQ. SP. ON A 3.875 B.C.
* Values shown include pinion, clamp and sleeve and are for standard NEMA mountings.
70 lbf in./arc min.
Efficiency rated at 3000 rpm input speed, at nominal rated torque. All torque ratings are
based upon 3000 rpm nominal input speed and 15,000 hours minimum service life.
INCH COMPONENT
Catalog Number
Gear
Ratio
S9134A-RTX004
S9134A-RTX005
S9134A-RTX007
S9134A-RTX010
S9134A-RTX016
S9134A-RTX020
S9134A-RTX025
S9134A-RTX028
S9134A-RTX035
S9134A-RTX040
S9134A-RTX050
S9134A-RTX070
S9134A-RTX100
S9134A-RTX160
S9134A-RTX280
S9134A-RTX400
S9134A-RTX500
S9134A-RTX700
4:1
5:1
7:1
10:1
16:1
20:1
25:1
28:1
35:1
40:1
50:1
70:1
100:1
160:1
280:1
400:1
500:1
700:1
11-50
L
Max.
4.82
Single
Stage
6.23
Double
Stage
7.63
Triple
Stage
Max. Rated
Continuous
Torque
lbf in.
1452
1274
863
559
1452
1452
1274
1452
1274
1452
1274
993
642
1452
1452
1452
1274
993
Max.
Momentary
Torque
lbf in.
1829
1605
1088
704
1829
1829
1605
1829
1605
1829
1605
1251
810
1829
1829
1829
1605
1251
Max.
Stopping
Torque
lbf in.
3473
3316
2821
2456
3473
3473
3316
3473
3316
3473
3316
2821
2456
3473
3473
3473
3316
2821
Gearhead
Moment
of Inertia*
ozf in. sec2
1.295 x 10-2
1.119 x 10-2
9.808 x 10-3
9.111 x 10-3
1.200 x 10-2
1.059 x 10-2
1.051 x 10-2
9.498 x 10-3
9.462 x 10-3
8.944 x 10-3
8.926 x 10-3
8.912 x 10-3
8.920 x 10-3
8.934 x 10-3
8.909 x 10-3
8.919 x 10-3
8.919 x 10-3
8.918 x 10-3
CG PLANETARY GEARHEADS
Radial Load (lbf)
NEMA Size 17, 23 & 34

Radial and Axial Shaft Loading Specifications
Compact Series
140
120
100
80
60
40
20
0
R
Inch
Size 17 Bearing Radial Load Limits
250 rpm
Radial Load (lbf)

Radial Load (lbf)
240
200
160
120
80
40
0
T
1
500 rpm
2000 rpm
0.2
0.4
0.6
0.8
1.0
1.2
Allowable radial load as a

function of speed and load
distance from mount face based
on life of 10,000 hours
160
140
120
100
80
60
40
20
0
KEY
50 rpm
3
4
5
0.2
0.4
0.6
0.8
1.0
1.2
7
8
0.2 0.4 0.6 0.8 1.0 1.2 1.4

10
Size 17, 23 & 34 Bearing Axial Load Limits

KEY
17 & 23
34
1500
2000
750
1000
500
425
350
300
250
200
150
Allowable axial load as a function

of output shaft rpm
75
100
320
280
240
200
160
120
80
40
0
50
Axial Load (lbf)
Output Shaft (rpm)
11
12
13
14
15
11-51
16
I
R
CG PLANETARY GEARHEADS NEMA SIZE 17

SINGLE AND DOUBLE STAGE
COMPACT SERIES
Inch
MATERIAL:
T
1
Housing - Steel, Black Zinc Plated

Mounting Flanges - Aluminum
Output Shaft - Stainless Steel
Gears - Steel, Case-Hardened
Bearings - Ball Bearings
-40F to +250F
2
3
4
5
6
7
8
FEATURES:
True planetary system.

NEMA mounting standards.
Low start-up torque.
Sealed high strength steel ball bearings.
Woodruff key #404 and motor mounting hardware kit supplied.
SPECIFICATIONS:

Shaft Loading - Radial: See Graph on Page: 11-51
Axial: See Graph on Page: 11-51
Min. Efficiency - Single Stage: 90%
Double Stage: 85%
Efficiency rated at 3,000 rpm input speed,
at nominal rated torque.
Max. Backlash - Single Stage: 12 arc min.

WEIGHT:
Single Stage: .8 lb.
11
12
13
14
15
16
.125 (4 HOLES)
EQ. SP. ON A
1.725 B.C.
.75
2.25
.062 .28
.06
Metric motor mounting available

on special order.
1.22
(TYP)
.866 +.000
-.002
9
10

.5000
.4995
.190
1.70
SQUARE
.125 (4 HOLES) EQ.

SP. ON A 1.725 B.C.
INCH COMPONENT
Catalog Number
S9117A-CG004
S9117A-CG005
S9117A-CG007
S9117A-CG010
S9117A-CG015
S9117A-CG020
S9117A-CG025
S9117A-CG028
S9117A-CG040
S9117A-CG050
S9117A-CG070
S9117A-CG100
Gear
Ratio
4:1
5:1
7:1
10:1
15:1
20:1
25:1
28:1
40:1
50:1
70:1
100:1
L
Max.
in.
2.41
Single
Stage
2.96
Double
Stage
Nominal
Rated
Torque*
lbf in.
109
103
90
81
110
120
113
121
124
117
101
81
Acceleration
Stall
Torque
Torque**
Max. Rated
Output rpm
lbf in.
lbf in.
(5000 rpm
Input)
ozf in. sec 2
137
130
113
102
138
151
142
153
156
147
127
102
221
210
183
153
224
244
230
248
252
237
205
153
1250
1000
714
500
333
250
200
178
125
100
71
50
2.331 x 10-4
1.895 x 10-4
1.566 x 10-4
1.395 x 10-4
3.606 x 10-4
1.896 x 10-4
1.878 x 10-4
1.566 x 10-4
1.396 x 10-4
1.391 x 10-4
1.388 x 10-4
1.386 x 10-4
* All Torque ratings are based on 3,000 rpm nominal input speed, and a Minimum Life of 10,000 hours.
** Stall torque rating is limited to 1,000 occurrences.
11-52
Moment
of
Inertia

COMPACT SERIES
R
Inch
MATERIAL:

Bearings - Ball Bearings, High Strength Steel
T
1
-40F to +250F
FEATURES:

3
4
SPECIFICATIONS:

Double Stage: 85%

WEIGHT:

#10-24 UNC-28 x .38 DP.(4 HOLES)

EQ. SP. ON A 2.625 B.C.
L
3.00
1.00
.06
.062 .38
.205 (4 HOLES)
EQ. SP. ON A
2.625 B.C.
7
8

on special order.
1.500 +.000
-.002
.5000
.4995
2.25
SQUARE
9
1.504
1.502 x .12 DP.
.250
INCH COMPONENT
Catalog Number
S9123A-CG004
S9123A-CG005
S9123A-CG007
S9123A-CG010
S9123A-CG015
S9123A-CG020
S9123A-CG025
S9123A-CG028
S9123A-CG040
S9123A-CG050
S9123A-CG070
S9123A-CG100
Gear
Ratio
4:1
5:1
7:1
10:1
15:1
20:1
25:1
28:1
40:1
50:1
70:1
100:1
L
Max.
in.
2.46
Single
Stage
3.14
Double
Stage
Nominal
Rated
Torque *
Acceleration
Torque
201
195
160
140
210
221
216
225
229
223
179
140
253
248
201
177
265
279
272
284
289
281
226
177
lbf in.
lbf in.
Max. Rated
Stall
Output rpm
Torque** (5000 rpm
lbf in.
409
400
325
285
428
451
440
459
467
454
366
285
Moment
of
Inertia
11
Input)
ozf in. sec
1250
1000
714
500
333
250
200
178
125
100
71
50
1.322 x 10-3
1.202 x 10-3
1.110 x 10-3
1.061 x 10-3
1.755 x 10-3
1.208 x 10-3
1.203 x 10-3
1.113 x 10-3
1.062 x 10-3
1.061 x 10-3
1.060 x 10-3
1.060 x 10-3
11-53
10
12
13
14
15
16
I
R

COMPACT SERIES
Inch
MATERIAL:
T
1

-40F to +250F
2
3
4
5
6
7
8
FEATURES:

SPECIFICATIONS:

Double Stage: 85%

WEIGHT:

on special order.
2.875 +.000
-.002
.7500
.7495
10
3.45
SQUARE
INCH COMPONENT
12
13
14
15
16
#10-24 UNC-28 x .50 DP.(4 HOLES)

EQ. SP. ON A 3.875 B.C.
L
4.63
1.25
.06
.094 .50
.220 (4 HOLES)
EQ. SP. ON A
3.875 B.C.

11

Catalog Number
S9134A-CG004
S9134A-CG005
S9134A-CG007
S9134A-CG010
S9134A-CG015
S9134A-CG020
S9134A-CG025
S9134A-CG028
S9134A-CG040
S9134A-CG050
S9134A-CG070
S9134A-CG100
Gear
Ratio
4:1
5:1
7:1
10:1
15:1
20:1
25:1
28:1
40:1
50:1
70:1
100:1
L
Max.
in.
3.33
Single
Stage
4.26
Double
Stage
Nominal
Rated
Torque*
lbf in.
744
702
621
530
756
830
778
845
861
806
706
598
2.877
2.879 x .150 DP.
.312
Acceleration
Stall
Torque
Torque**
Max. Rated
Output rpm
lbf in.
lbf in.
(5000 rpm
Input)
ozf in. sec 2
937
884
782
668
952
1046
980
1065
1085
1016
889
753
1515
1429
1264
1080
1539
1690
1585
1721
1754
1642
1437
1217
1250
1000
714
500
333
250
200
178
125
100
71
50
4.594 x 10-3
3.544 x 10-3
2.748 x 10-3
2.332 x 10-3
7.719 x 10-3
3.611 x 10-3
3.569 x 10-3
2.782 x 10-3
2.349 x 10-3
2.338 x 10-3
2.330 x 10-3
2.326 x 10-3
11-54
Moment
of
Inertia
PG PLANETARY GEARHEADS NEMA SIZE 17

PRECISION SERIES
LOW BACKLASH DESIGN
R
Inch
MATERIAL:

Mounting Flanges - Aluminum, Black Anodized
1
Precision
Component
T
1
-40F to +255F
FEATURES:

Includes a precision balanced clamp-on pinion.
3
4
SPECIFICATIONS:

Shaft Loading - Radial: 125 lbf
Axial: 75 lbf
Double Stage: 85%

Lower backlash units available

on special order.
5
7
2.05
.125
WEIGHT:
Gear
Ratio
S9117A-PG003
S9117A-PG004
S9117A-PG005H
S9117A-PG007
S9117A-PG010
S9117A-PG016
S9117A-PG022
S9117A-PG028
S9117A-PG040
S9117A-PG049
S9117A-PG055
S9117A-PG070
S9117A-PG100
3:1
4:1
5.5:1
7:1
10:1
16:1
22:1
28:1
40:1
49:1
55:1
70:1
100:1
.187
1.22
(TYP)
1.65
SQUARE
L
Max.
.870
.868
x .100 DP.
in.
2.62
Single
Stage
3.28
Double
Stage
lbf in.
167
158
143
119
56
169
171
172
174
127
156
128
52
.100
.062
1.25 .125 (4 HOLES) EQ. SP.
ON A 1.725 B.C.
.125 (4 HOLES)
EQ. SP. ON A
1.725 B.C.
Max. Rated
Continuous
Torque*
.56
.866
.864
INCH COMPONENT
Catalog Number
.5000
.4995
.063

Triple stage gearheads are available
on special order for gear ratios of
160, 280, 400, 550 and 700 to 1.
Other mounting interfaces are
Max. Rated
Max.
Inertia
Momentary Output rpm Gearhead
(6500 rpm
Torque
ozf in. sec 2
lbf in.
Input)
261
248
223
158
84
264
267
269
272
199
243
201
77
2166
1625
1182
928
650
406
295
232
162
132
118
92
65
1.669 x 10-4
1.053 x 10-4
5.870 x 10-5
3.692 x 10-5
1.833 x 10-5
1.045 x 10-4
5.830 x 10-5
3.667 x 10-5
1.821 x 10-5
3.479 x 10-5
1.755 x 10-5
1.729 x 10-5
1.708 x 10-5
Inertia
Input
Pinion
ozf in. sec 2

2.163 x 10-4
1.352 x 10-4
1.174 x 10-4
1.143 x 10-4
1.132 x 10-4
1.352 x 10-4
1.174 x 10-4
1.143 x 10-4
1.132 x 10-4
1.143 x 10-4
1.132 x 10-4
1.132 x 10-4
1.132 x 10-4
9
10
11
12
13
14
15
* Maximum Rated Continuous torque is rated at 3,000 rpm, and a Minimum Life of 10,000 hours.
11-55
16
I
R
T
1

PRECISION SERIES
LOW BACKLASH DESIGN
Inch
MATERIAL:

1
Precision
Component
-40F to +255F
FEATURES:
3
4

SPECIFICATIONS:
5
6
7
8

Axial: 600 lbf
Double Stage: 85%

Lower Backlash units available on special order.
.5000
.4995
2.95
.063
.125
WEIGHT:
L
.250
.56
1.504
1.502
1.500
1.498
Non-NEMA size mounting interfaces

10
Triple Stage gearheads are available

160, 280, 400, 550 and 700 to 1.
1.86
(TYP)
2.25
SQUARE
.125
#10-24 UNC-2B X
.375 DP. (4 HOLES)
EQ. SP. ON A 2.625 B.C.
.062
1.25
.205 (4 HOLES)
EQ. SP. ON A
2.625 B.C.
INCH COMPONENT
11
12
13
14
15
Catalog Number
S9123A-PG003
S9123A-PG004
S9123A-PG005H
S9123A-PG007
S9123A-PG010
S9123A-PG016
S9123A-PG022
S9123A-PG028
S9123A-PG040
S9123A-PG049
S9123A-PG055
S9123A-PG070
S9123A-PG100
L
Gear
Ratio Max.
in.
3:1
4:1
2.66
5.5:1 Single
7:1 Stage
10:1
16:1
22:1
28:1
3.48
40:1
Double
49:1
Stage
55:1
70:1
100:1
Max. Rated
Max.
Max. Rated
Cont.
Momentary Output rpm
Torque*
Torque
(6500 rpm
lbf in.
lbf in.
Input)
380
360
317
263
119
376
380
384
388
286
347
288
110
594
562
496
411
179
587
594
600
607
447
542
450
164
2166
1625
1182
928
650
406
295
232
162
132
118
92
65
Inertia
Gearhead
ozf in. sec 2

4.866 x 10-4
3.113 x 10-4
1.746 x 10-4
1.100 x 10-4
5.471 x 10-5
3.287 x 10-4
1.838 x 10-4
1.157 x 10-4
5.749 x 10-5
1.098 x 10-4
5.543 x 10-5
5.460 x 10-5
5.393 x 10-5
* Maximum Rated Continuous Torque is rated at 3000 rpm, and a Minimum Life of 10,000 hours.
16
11-56
Inertia
Input
Pinion
ozf in. sec 2

1.194 x 10-3
9.502 x 10-4
8.969 x 10-4
8.880 x 10-4
8.846 x 10-4
9.502 x 10-4
8.969 x 10-4
8.880 x 10-4
8.846 x 10-4
8.880 x 10-4
8.846 x 10-4
8.846 x 10-4
8.846 x 10-4

PRECISION SERIES
LOW BACKLASH DESIGN
R
Inch
MATERIAL:

1
Precision
Component
T
1
-40F to +255F
FEATURES:

3
4
SPECIFICATIONS:

Axial: 900 lbf
Double Stage: 85%

Lower backlash units available on special order.
.7500
.7495
4.38
.187
WEIGHT:
.094
Single Stage: 7 lb.
Double Stage: 8 lb.
2.875
2.873
are available on special order
To mate with D50R10-06.. motor
requires nonstandard pinion
2.74
.220 (4 HOLES)
(1/2 inch bore). Add "SP" to the part
(TYP)
EQ. SP. ON A
number when ordering.
3.25
3.875 B.C.
SQUARE

S9134A-PG003
S9134A-PG004
S9134A-PG005H
S9134A-PG007
S9134A-PG010
S9134A-PG016
S9134A-PG022
S9134A-PG028
S9134A-PG040
S9134A-PG049
S9134A-PG055
S9134A-PG070
S9134A-PG100
Gear
Ratio
3:1
4:1
5.5:1
7:1
10:1
16:1
22:1
28:1
40:1
49:1
55:1
70:1
100:1
L
Max.
in.
4.19
Single
Stage
5.31
Double
Stage
Max. Rated
Continuous
Torque*
lbf in.
1285
1219
1113
935
552
1315
1333
1346
1364
1015
1232
1027
507
L
.312
.56
2.879
2.877
x .150 DP.
.150
.062
1.50 #10-24 UNC-2B x .50 DP.
(4 HOLES) EQ. SP. ON
A 3.875 B.C.
INCH COMPONENT
Catalog Number
Max. Rated
Max.
Inertia
(6500 rpm
Torque
ozf in. sec 2
lbf in.
Input)
2008
1905
1740
1461
828
2055
2083
2103
2132
1587
1925
1605
761
2166
1625
1182
928
650
406
295
232
162
132
118
92
65
4.672 x 10-3
2.833 x 10-3
1.585 x 10-3
9.983 x 10-4
4.961 x 10-4
2.824 x 10-3
1.580 x 10-3
9.952 x 10-4
4.946 x 10-4
9.417 x 10-4
4.759 x 10-4
4.684 x 10-4
4.623 x 10-4
Inertia
Input
Pinion
ozf in. sec
11-57
10
11
4.901 x 10-3
2.522 x 10-3
2.040 x 10-3
1.955 x 10-3
1.923 x 10-3
2.522 x 10-3
2.040 x 10-3
1.955 x 10-3
1.923 x 10-3
1.955 x 10-3
1.923 x 10-3
1.923 x 10-3
1.923 x 10-3
Triple stage gearheads are available on special order for gear ratios of 160, 280, 400, 550 and 700 to 1.
12
13
14
15
16
I
R

PRECISION SERIES
LOW BACKLASH DESIGN
Inch
MATERIAL:
T
1

1
Precision
Component
2
3
4
5
6
7
-40F to +255F
FEATURES:

SPECIFICATIONS:

Axial: 1400 lbf
Double Stage: 85%

Lower Backlash units available

on special order.
.250
WEIGHT:
8
9
10
12
13
14
15
5.51
1.0000
.9995
.125
Catalog Number
S9142A-PG003
S9142A-PG004
S9142A-PG005H
S9142A-PG007
S9142A-PG010
S9142A-PG016
S9142A-PG022
S9142A-PG028
S9142A-PG040
S9142A-PG049
S9142A-PG055
S9142A-PG070
S9142A-PG100
L
Gear
Ratio Max.
in.
3:1
4:1
4.73
5.5:1 Single
7:1 Stage
10:1
16:1
22:1
28:1
6.36
40:1
Double
49:1
Stage
55:1
70:1
100:1
2.191
2.189
x .175 DP.
2.187
2.185

Triple Stage gearheads are available
160, 280, 400, 550 and 700 to 1.
L
.500
.63

INCH COMPONENT
11

3.50
(TYP)
4.20
SQUARE
.062
.175
1/4-20 UNC-2B X
.50 DP. (4 HOLES)
EQ. SP. ON A 4.950 B.C.
.280 (4 HOLES)
EQ. SP. ON A
4.950 B.C.
2.00
Max. Rated
Max.
Max. Rated
Cont.
Torque*
Torque
(6500 rpm
lbf in.
lbf in.
Input)
2301
2195
2021
1711
1122
2379
2414
2438
2473
1867
2250
1890
1031
3597
3430
3159
2673
1684
3717
3772
3811
3865
2918
3516
2953
1547
2166
1625
1182
928
650
406
295
232
162
132
118
92
65
Inertia
Gearhead
ozf in. sec 2

1.641 x 10-2
1.049 x 10-2
5.878 x 10-3
3.704 x 10-3
1.841 x 10-3
1.101 x 10-2
6.156 x 10-3
3.875 x 10-3
1.925 x 10-3
3.706 x 10-3
1.866 x 10-3
1.843 x 10-3
1.823 x 10-3
16
11-58
Inertia
Input
Pinion
ozf in. sec 2

1.680 x 10-2
1.032 x 10-2
8.997 x 10-3
8.766 x 10-3
8.680 x 10-3
1.032 x 10-2
8.997 x 10-3
8.766 x 10-3
8.680 x 10-3
8.766 x 10-3
8.680 x 10-3
8.680 x 10-3
8.680 x 10-3
EG PLANETARY GEARHEADS NEMA SIZE 17

ECONOMY SERIES
LOW BACKLASH
R
Inch
MATERIAL:
Housing - Steel, Gold Zinc Plated

T
1
-40F to +255F
FEATURES:

3
4
SPECIFICATIONS:

Axial: 75 lbf
Double Stage: 85%

Lower Backlash units available

on special order.
.5000
.4995
.866
.864
.125
WEIGHT:
5
6

1.65 SQ.
INCH COMPONENT
L
Gear
Ratio Max.
in.
3:1
4:1
5.5:1
7:1
10:1
16:1
22:1
28:1
40:1
49:1
55:1
70:1
100:1
2.66
Single
Stage
3.32
Double
Stage
8
.870
.868
.063
1.22 (TYP)
S9117A-EG003
S9117A-EG004
S9117A-EG005H
S9117A-EG007
S9117A-EG010
S9117A-EG016
S9117A-EG022
S9117A-EG028
S9117A-EG040
S9117A-EG049
S9117A-EG055
S9117A-EG070
S9117A-EG100
.13
.187
.56
Single Stage: 1 lb.

Catalog Number
L
2.05
.062
1.25
.125 (4 HOLES)
EQ. SP. ON A 1.725 B.C.
(BOTH FLANGES)
Max. Rated
Max.
Max. Rated
Cont.
Torque*
Torque
(5000 rpm
lbf in.
lbf in.
Input)
125
119
107
89
56
127
128
129
131
95
117
96
52
174
165
149
124
84
176
178
179
181
132
162
134
77
1666
1250
909
714
500
312
227
178
125
102
91
71
50
.100
Inertia
Gearhead
ozf in. sec 2

1.669 x 10-4
1.053 x 10-4
5.870 x 10-5
3.692 x 10-5
1.833 x 10-5
1.045 x 10-4
5.830 x 10-5
3.667 x 10-5
1.821 x 10-5
3.479 x 10-5
1.755 x 10-5
1.729 x 10-5
1.708 x 10-5
Inertia
Input
Pinion
ozf in. sec 2

2.163 x 10-4
1.352 x 10-4
1.174 x 10-4
1.143 x 10-4
1.132 x 10-4
1.352 x 10-4
1.174 x 10-4
1.143 x 10-4
1.132 x 10-4
1.143 x 10-4
1.132 x 10-4
1.132 x 10-4
1.132 x 10-4
10
11
12
13
14
15
11-59
16
I
R
T
1

ECONOMY SERIES
LOW BACKLASH DESIGN
Inch
MATERIAL:

-40F to +255F
FEATURES:
3
4
5
6
7
8

SPECIFICATIONS:

Axial: 600 lbf
Double Stage: 85%

.5000
.4995
1.500
2.95
WEIGHT:
1.498
.250
.125
Single Stage: 2 lb.
.56
Double Stage: 3 lb.

2.25 SQ.
INCH COMPONENT
13
14
15
16
1.504
1.502
.062
1.25
1.86 SQ.
10
12
.250
.063
11
Catalog Number
L
Gear
Ratio Max.
in.
.205 (4 HOLES)
EQ. SP. ON A 2.625 B.C. (BOTH FLANGES)
Max. Rated
Max.
Max. Rated
Cont.
Torque*
Torque
(5000 rpm
lbf in.
.125
lbf in.
Input)
Inertia
Gearhead
ozf in. sec 2
1666
4.866 x 10-4
396
3:1
285
S9123A-EG003
1250
4:1
264
366
3.113 x 10-4
S9123A-EG004
3.06
238
330
909
5.5:1 Single
1.746 x 10-4
S9123A-EG005H
274
714
7:1 Stage
197
1.100 x 10-4
S9123A-EG007
119
179
500
10:1
5.471 x 10-5
S9123A-EG010
312
16:1
282
391
3.287 x 10-4
S9123A-EG016
227
22:1
285
396
1.838 x 10-4
S9123A-EG022
28:1
288
400
178
1.157 x 10-4
S9123A-EG028
3.97
291
405
125
40:1
5.749 x 10-5
S9123A-EG040
Double
213
295
102
49:1
1.098 x 10-4
S9123A-EG049
Stage
91
55:1
260
362
5.543 x 10-5
S9123A-EG055
71
70:1
215
298
5.460 x 10-5
S9123A-EG070
100:1
110
164
50
5.393 x 10-5
S9123A-EG100
11-60
Inertia
Input
Pinion
ozf in. sec 2

1.194 x 10-3
9.502 x 10-4
8.969 x 10-4
8.880 x 10-4
8.846 x 10-4
9.502 x 10-4
8.969 x 10-4
8.880 x 10-4
8.846 x 10-4
8.880 x 10-4
8.846 x 10-4
8.846 x 10-4
8.846 x 10-4

ECONOMY SERIES
LOW BACKLASH DESIGN
R
Inch
MATERIAL:

T
1
-40F to +255F
FEATURES:

3
4
SPECIFICATIONS:

Axial: 900 lbf
Double Stage: 85%

Lower backlash units available on special order.
.7500
.7495
2.875
2.873
.187 4.38
WEIGHT:
Single Stage: 7 lb.
Double Stage: 8 lb.
are available on special order
To mate with D50R10-06.. motor
requires nonstandard pinion
(1/2 inch bore).
Add "SP" to the part number when
ordering.
Gear
Ratio
S9134A-EG003
S9134A-EG004
S9134A-EG005H
S9134A-EG007
S9134A-EG010
S9134A-EG016
S9134A-EG022
S9134A-EG028
S9134A-EG040
S9134A-EG049
S9134A-EG055
S9134A-EG070
S9134A-EG100
3:1
4:1
5.5:1
7:1
10:1
16:1
22:1
28:1
40:1
49:1
55:1
70:1
100:1
6
7
L
.50
.375
.56
2.879
2.877
.094
3.25 SQ.
L
Max.
in.
4.56
Single
Stage
5.82
Double
Stage
Max. Rated
Continuous
Torque*
lbf in.
964
914
835
701
507
986
1000
1009
1023
762
924
770
507
8
9
.062
2.74 SQ.
INCH COMPONENT
Catalog Number
.150
1.50
10
.220 (4 HOLES) EQ. SP. ON

A 3.875 B.C. (BOTH FLANGES)
Max. Rated
Max.
Inertia
(5000 rpm
Torque
ozf in. sec 2
lbf in.
Input)
1339
1270
1160
934
704
1370
1389
1402
1421
1058
1283
1070
761
1666
1250
909
714
500
312
227
178
125
102
91
71
50
4.672 x 10-3
2.833 x 10-3
1.585 x 10-3
9.983 x 10-4
4.961 x 10-4
2.824 x 10-3
1.580 x 10-3
9.952 x 10-4
4.946 x 10-4
9.417 x 10-4
4.759 x 10-4
4.684 x 10-4
4.623 x 10-4
Inertia
Input
Pinion
11
4.901 x 10-3
2.522 x 10-3
2.040 x 10-3
1.955 x 10-3
1.923 x 10-3
2.522 x 10-3
2.040 x 10-3
1.955 x 10-3
1.923 x 10-3
1.955 x 10-3
1.923 x 10-3
1.923 x 10-3
1.923 x 10-3
12
ozf in. sec 2
13
14
15
11-61
16
I
R
T
1

ECONOMY SERIES
LOW BACKLASH DESIGN
Inch
MATERIAL:

-40F to +255F
FEATURES:
3
4
5
6
7
8

SPECIFICATIONS:

Axial: 1400 lbf
Double Stage: 85%

Lower Backlash units available on special order
1.0000
.9995
2.187
5.51
2.185
.500
.250
WEIGHT:
Single Stage: 12 lb.
.63

L
.50
2.191
2.189
.125
9
.062
2.00
3.50 SQ.
10
4.20 SQ.
INCH COMPONENT
11
12
13
14
15
Catalog Number
S9142A-EG003
S9142A-EG004
S9142A-EG005H
S9142A-EG007
S9142A-EG010
S9142A-EG016
S9142A-EG022
S9142A-EG028
S9142A-EG040
S9142A-EG049
S9142A-EG055
S9142A-EG070
S9142A-EG100
L
Gear
Ratio Max.
in.
3:1
4:1
5.20
5.5:1 Single
7:1 Stage
10:1
16:1
22:1
28:1
6.80
40:1
Double
49:1
Stage
55:1
70:1
100:1
.150
.280 (4 HOLES)
EQ. SP. ON A 4.950 B.C.
(BOTH FLANGES)
Max. Rated
Max.
Max. Rated
Cont.
Torque*
Torque
(5000 rpm
lbf in.
lbf in.
Input)
1726
1646
1516
1283
936
1784
1810
1829
1855
1400
1688
1417
1024
2398
2287
2106
1782
1300
2478
2515
2540
2577
1945
2344
1969
1423
1666
1250
909
714
500
312
227
178
125
102
91
71
50
Inertia
Gearhead
ozf in. sec 2

1.641 x 10-2
1.049 x 10-2
5.878 x 10-3
3.704 x 10-3
1.841 x 10-3
1.101 x 10-2
6.156 x 10-3
3.875 x 10-3
1.925 x 10-3
3.706 x 10-3
1.866 x 10-3
1.843 x 10-3
1.823 x 10-3
16
11-62
Inertia
Input
Pinion
ozf in. sec 2

1.680 x 10-2
1.032 x 10-2
8.997 x 10-3
8.766 x 10-3
8.680 x 10-3
1.032 x 10-2
8.997 x 10-3
8.766 x 10-3
8.680 x 10-3
8.766 x 10-3
8.680 x 10-3
8.680 x 10-3
8.680 x 10-3
INCH OR
METRIC
R
Inch
T
1
2
SPUR GEARS BEVEL GEARS HELICAL GEARS INTERNAL

3
GEARS WORM GEARS SPLINES
At SDP/SI, we offer complete design and manufacturing 4

services at our fine pitch gear cutting facility, one of the
largest in the U.S. with over 130 gear cutting machines.
PRECISION COMMERCIAL 6
7
8
9
10
CALL
11
516-328-3300
12
to discuss your
requirements13
E-Mail
14
us at
sdp-sisupport@sdp-si.com15
11-63
16
T-SERIES GEARHEAD MOUNTING INSTRUCTION

R
Inch
T
MOTOR
1
2
MOTOR SHAFT SLEEVE
MOUNTING BRACKET
GEARHEAD RATIO UNIT WITH BUILT-IN PINION
5
6
7
8
9
10
11
12
All of our NEMA and Metric sized gearheads, except NEMA size 17, are offered using a ready-to-mount
system of attaching the motor to the gearhead. The gearhead ratio unit includes a preinstalled pinion and
a self-aligning input clamp. This allows the gearhead to maintain concentricity with the motor shaft and
eliminates the need to set the pinion.
The procedure for selecting a complete gearhead solution is simple:
Step 1. Select your motor and determine the appropriate frame size for the gearhead.
Step 2. Measure the pilot diameter E, pilot length (from motor), bolt circle, shaft OD and shaft length of
your motor.
Step 3. Based on your measurements and frame size selection, go to the page that lists the mounting
bracket and sleeve that you require.
Step 4. Choose the reduction ratio and complete the part number.
Example: You have a NEMA 34 motor and you measure the pilot diameter to be 2.875 in., the pilot length
to be .12 in., the bolt circle to be 3.875 in., the shaft diameter to be .375 in. and the shaft length to be 1.10
in. If your required reduction is 30:1 then you would select mounting bracket "1" and sleeve "A".
Therefore, the part number you would need to order is: S9134T-0301A.
NOTE: The mounting brackets and motor shaft sleeves listed in this catalog complement 90% of the
motors currently available. If your motor does not meet our gearhead specifications, please contact our
engineering staff to arrange for a custom mounting bracket or motor shaft sleeve.
13
14
15
16
11-64
GEARHEAD TO MOTOR MOUNTING INFORMATION

MOUNTING INSTRUCTIONS:
A) Using the screws provided, bolt the mounting bracket to the input end of the gearhead
ratio unit.
B) Slide the motor shaft sleeve into the input clamp and align the slot in the sleeve with
the slot in the clamp.
Inch
C) Rotate the clamp to align the mounting bracket access holes with the clamping bolts.
T
1
D) Place the motor on a solid work surface with the output shaft pointing up. Slide the assembled
gearhead onto the motor shaft.
E) Using a torque wrench, tighten the clamp bolts to the pretightening torque values listed below.
F) Using the screws provided, bolt the gearhead to the motor.
G) Using an alternating pattern, gradually tighten the clamp bolts until you reach the final tightening
torque listed below.
4
Clamp Bolt Tightening Torques
Gearhead Frame Size
NEMA 23
NEMA 34
NEMA 42
Metric 60
Metric 90
Metric 115
Pretightening Torque
lb. in.
2
4
16
2
4
16
Nm
0.2
0.4
1.8
0.2
0.4
1.8
Final Tightening Torque

lb. in.
39
76
316
39
76
316
Nm
4.4
8.5
36
4.4
8.5
36
5
6
7
8
9
10
11
12
13
14
15
11-65
16
T-SERIES PLANETARY GEARHEADS NEMA SIZE 23

R
T
MATERIAL:
Housing - Anodized Aluminum

Gears - Steel, Heat-Treated
Bearings - Ball, Sealed
Inch
-29F to +250F (-34C to +121C)
FEATURES:

Gears heat-treated to Rc 50.
Readily mounts to most motors.
SPECIFICATIONS:
4
5

Shaft Loading - Radial (Fr): See graph
Axial (Fa): 310 lbf (1379 N) @ 250 rpm output
Efficiency - Single Stage: 93%
Double Stage: 88%
Torsional Stiffness: 6.3 lbf in./arc min. (0.71 Nm/arc min.)
Values in graph are in rpm
WEIGHT:
Single Stage: 1.5 lb. (0.7 kg)

Double Stage: 1.9 lb. (0.9 kg)
X
Fr
Fa
9
10
13
14
15
16
350
300
250
200
150
100
50
0
30
35
1.2
1334
1112
890
667
445
222
0
1.4
50
100
250
500
1000
0.2
present stock is depleted
INCH COMPONENT
CATALOG NUMBER
*S9123T-
0.4
0.6
0.8
Distance X (in.)
1.0
1556
RADIAL SHAFT LOAD RATING
Sleeve Code
Ratio
A, B, C, D, E, F, G, H or I
Code
Mounting Bracket
Code
1, 2 or 3
11
12
Radial Force, Fr (lbf)
Distance X (mm)
10
15
20
25
Radial Force, Fr (N)
Ratio
Code
003
005
010
015
025
030
050
100
Gear
Ratio
3:1
5:1
10:1
15:1
25:1
30:1
50:1
100:1
in.
(mm)
1.92 (48.8)
Single
Stage
2.61 (66.3)
Double
Stage
NOTE: Dimensions in ( ) are in mm.
11-66
Max. Rated
Continuous
Torque at
1000 rpm
lbf in. (Nm)
98 (11.1)
105 (11.9)
63 (7.1)
124 (14)
175 (19.8)
207 (23.4)
202 (22.8)
85 (9.6)
Max. Rated
Continuous
Torque at
4000 rpm
lbf in. (Nm)
65 (7.3)
71 (8)
52 (5.9)
100 (11.3)
115 (13)
147 (16.6)
142 (16)
73 (8.2)
Max.
Momentary
Torque
lbf in. (Nm)
150 (17)
250 (28.3)
250 (28.3)
250 (28.3)
250 (28.3)
275 (31.1)
275 (31.1)
250 (28.3)
Inertia Reflected
Back to
Motor Shaft
lbf in. sec.2 x 10-4
(kg cm2)
.67 (0.076)
.22 (0.025)
.14 (0.016)
.21 (0.024)
.21 (0.024)
.13 (0.015)
.13 (0.015)
.13 (0.015)

R
Inch
.15 (3.8)
2.27 SQ.
(57.7)
.195 (4.95) THRU HOLES

4 PL. EQ. SPACED ON A
2.625 (66.68) BOLT CIRCLE
.062 (1.57)
.3750 (9.525)
.3745 (9.512)
.360 (9.1)
FLAT
2.36 SQ.
(60)
.75
(19.1)
1.500 (38.1)
1.499 (38.07)
3
.25
(6.4)
1.00
(25.4)
5
A
X
B
.675
(17.1)
.68
(17.3)
E*
ACCESS
HOLES FOR
X
MOTOR SHAFT
CLAMP UNIT MAY
BE SUPPLIED
WITH 2 OR 4 HOLES.
SECTION Y-Y
C THREAD
ON A D
BOLT CIRCLE
BORE
MOTOR SHAFT SLEEVE
SECTION X-X
10
MOUNTING BRACKET
11
See technical page 11-64 for assembly directions.
Code
1
2
3
2.40
(61)
2.40
(61)
3.54
(89.9)
1.22
(31)
1.22
(31)
1.47
(37.3)
C
M4
M4
M6
Mounting Bracket
E*
D
F
Dia.
2.625
(66.7)
1.984
(50.4)
2.756
(70)
3.937
(100)
1.984
(50.4)
3.165
(80.4)
.15
(3.8)
.15
(3.8)
.15
(3.8)
Motor Shaft
Sleeve Code
Motor Shaft Length

(max. min.)
1.28 0.65
(32.5 16.5)
1.28 0.65
(32.5 16.5)
1.53 0.9
(38.9 22.9)

* Pilot diameter is a clearance diameter and should not be used to center the gearhead.
Code
Bore
A
B
C
D
E
F
G
H
I
.250
.3125
.375
.500
8 mm
9 mm
10 mm
11 mm
14 mm
11-67
12
13
14
15
16

R
T
MATERIAL:
Inch

-29F to +250F (-34C to +121C)
FEATURES:

SPECIFICATIONS:
4
5

Double Stage: 88%
Torsional Stiffness: 16.8 lbf in./arc min. (1.9 Nm/arc min.)
WEIGHT:
600

Fr
Fa
13
14
15
16
30
35
40
500
400
100
300
250
2224
1779
1334
500
1000
200
890
445
100
0
2669
0.2
0.4
0.6 0.8 1.0

Distance X (in.)
1.2
1.4
1.6

INCH COMPONENT
CATALOG NUMBER
*S9134T-
Sleeve Code
Ratio
A, B, C, D, E, or F
Code
Mounting Bracket
Code
1, 2 or 3
11
12
Distance X (mm)
15 20
25
50
9
10
10
Ratio
Code
Gear
Ratio
in.
(mm)
3:1
2.68 (68)
003
5:1
Single
005
10:1
Stage
010
15:1
015
25:1
3.53 (89.6)
025
30:1
Double
030
50:1
Stage
050
100:1
100
11-68
Max. Rated
Continuous
Torque at
1000 rpm
lbf in. (Nm)
360 (40.7)
490 (55.4)
238 (26.9)
454 (51.3)
652 (73.7)
500 (56.5)
720 (81.4)
325 (36.7)
Max. Rated
Continuous
Torque at
4000 rpm
lbf in. (Nm)
270 (30.5)
325 (36.7)
192 (21.7)
373 (42.1)
526 (59.4)
416 (47)
595 (67.2)
270 (30.5)
Max.
Momentary
Torque
Inertia Reflected
Back to
Motor Shaft

(kg cm2)
510 (57.6)
3.90 (0.44)
700 (79.1)
1.20 (0.140)
700 (79.1)
.66 (0.075)
850 (96.1)
1.20 (0.140)
850 (96.1)
.66 (0.075)
850 (96.1)
.65 (0.074)
850 (96.1)
.65 (0.074)
700 (79.1)
.65 (0.074)
lbf in. (Nm)

R
Inch
3.54 SQ. (90)
3.30 SQ. (83.8)

3.875 (98.43) BOLT CIRCLE
.17
(4.32)
.062
(1.57)
.75
.5000 (12.7)
.4995 (12.687) (19.1)
E
1/8" (3.2)
AMERICAN STD.
SQUARE KEY
1.25 (32.8)
2.875 (73.03)
2.874 (73)
.15
(3.8)
2
3
.375
(9.53)
L
.556 (14.1)
MOUNTING BRACKET
SHOWN ATTACHED
5
A
X
B
.875
(22.2)
.83
(21.1)
E*
BORE
ACCESS
HOLES FOR
X
MOTOR SHAFT
CLAMP UNIT MAY
BE SUPPLIED
WITH 2 OR 4 HOLES.
C THREAD
ON A D
BOLT CIRCLE
Y
SECTION Y-Y
MOTOR SHAFT SLEEVE
SECTION X-X
10
MOUNTING BRACKET
11
Code
1
2
3
3.54
(89.9)
3.54
(89.9)
4.53
(115.1)
1.735
(44.1)
1.735
(44.1)
2.470
(62.7)
C
M5
M6
M8
Mounting Bracket
E*
D
F
Dia.
3.87
(98.3)
3.94
(100)
5.71
(145)
3.165
.20
(80.4) (5.1)
.20
3.165
(80.4) (5.1)
4.345
.58
(110.4) (14.7)

* Pilot diameter is a clearance diameter and
should not be used to center the gearhead.
Motor Shaft
Sleeve Code
Motor Shaft Length

(max. min.)
1.53 0.61
(38.9 15.5)
1.79 0.88
(45.5 22.4)
1.79 0.88
(45.5 22.4)
Code
Bore
A
B
C
D
E
F
.375
.500
.625
14 mm
16 mm
19 mm
12
13
14
15
11-69
16

R
T
MATERIAL:

Inch
-29F to +250F (-34C to +121C)
FEATURES:

SPECIFICATIONS:
4
5

Double Stage: 88%
Torsional Stiffness: 31 lbf in./arc min. (3.5 Nm/arc min.)
WEIGHT:

Fr
8
9
10
Fa
13
14
15
16
45 50
3559
3114
2669
2224
250
1779
500
1334
1000
890
445
0
0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0
Distance X (in.)
0
5
50
100
INCH COMPONENT
CATALOG NUMBER
*S9142T-
10
Sleeve Code
Ratio
A, B, C, D, E, F, or G
Code
Mounting Bracket
Code
1, 2 or 3
11
12
800
700
600
500
400
300
200
100
0
Distance X (mm)
15 20 25 30 35 40
Ratio
Code
003
005
010
015
025
030
050
100
Gear
Ratio
3:1
5:1
10:1
15:1
25:1
30:1
50:1
100:1
in.
(mm)
3.49 (88.6)
Single
Stage
4.72 (119.9)
Double
Stage
11-70
Max. Rated
Continuous
Torque at
1000 rpm
lbf in. (Nm)
690 (78)
810 (91.5)
460 (52)
878 (99.2)
1250 (141.2)
972 (109.8)
1395 (157.6)
630 (71.2)
Max. Rated
Continuous
Torque at
4000 rpm
lbf in. (Nm)
485 (54.8)
530 (59.9)
370 (41.8)
715 (80.8)
865 (97.7)
805 (91)
1050 (118.6)
522 (59)
Max.
Momentary
Torque
lbf in. (Nm)
1000 (113)
1000 (113)
1000 (113)
1600 (180.8)
1600 (180.8)
1600 (180.8)
1600 (180.8)
1200 (135.6)
Inertia Reflected
Back to
Motor Shaft
(kg cm2)
14 (1.6)
3.8 (0.43)
1.9 (0.21)
3.9 (0.44)
3.7 (0.42)
1.9 (0.21)
1.8 (0.2)
1.8 (0.2)

R
Inch
4.53 SQ. (115)

4.25 SQ. (108)
.21
(5.3)
4.950 (125.73) BOLT CIRCLE
.875
.6250 (15.875)
.6245 (15.862) (22.2)
T
1
.093
(2.4)
2
3
1/8" (3.2)
AMERICAN STD.
SQUARE KEY
1.50 (38.1)
2.187 (55.55)
2.186 (55.52)
.17
(4.3)
.50 (12.7)
.706 (17.9)
A
X
B
1.125
(28.58)
1
(25.4)
E*
BORE
ACCESS
HOLES FOR
X
MOTOR SHAFT
CLAMP UNIT MAY
BE SUPPLIED
WITH 2 OR 4 HOLES.
C THREAD
ON A D
BOLT CIRCLE
7
8
Y
SECTION Y-Y
MOTOR SHAFT SLEEVE
SECTION X-X
10
MOUNTING
MOUNTINGBRACKET
BRACKET
11
Code
4.53
(115.1)
4.53
(115.1)
4.92
(125)
5.59
(142)
2
3
4
1.925
M6
(48.9)
1.925
M6
(48.9)
2.36
M8
(59.9)
2.36
M10
(59.9)
Mounting Bracket
E*
D
F
Dia.
4.95
(126)
3.94
(100)
5.71
(145)
6.50
(165)
.25
3.165
(80.4) (6.4)
3.165
.25
(80.4) (6.4)
.58
4.345
(110.4) (14.7)
5.134
.58
(130.4) (14.7)
Motor Shaft
Sleeve Code
Motor Shaft Length

(max. min.)
2.12 0.99
(53.8 25.1)
2.12 0.99
(53.8 25.1)
2.56 1.42
(65.0 36.0)
2.56 1.42
(65.0 36.0)
Code
Bore
A
B
C
D
E
F
G
.625
1.000
14 mm
16 mm
19 mm
22 mm
24 mm

11-71
12
13
14
15
16
I
R
T
1
SPUR GEARHEADS NEMA SIZE 23

LOW-COST ALTERNATIVE TO
PLANETARY GEARHEAD
LONG-LIFE
Inch
MATERIAL:

Gears - Stainless Steel
-40F to +255F
FEATURES:
3
4

Woodruff key #303 and motor
mounting hardware kit supplied.
Sealed ball bearing on output shaft.
O-ring at each joint.
SPECIFICATIONS:
5
6
7
8

Axial: 75 lbf
Min. Efficiency: 90%
Max. Backlash: 20 arc min.
Lower Backlash units
10 arc min.
Max. Inertia Reflected to Input:
-4
7.15 x 10 ozf in. sec.2
Pinion Gear Inertia: 7.59 x 10-4 ozf in. sec.2
Max. Torque Rating - Continuous: 20 lbf in.
Momentary: 30 lbf in.
1.500 .094
1.498
.205 (4 HOLES)
EQ. SP. ON A
2.625 B.C.
(BOTH FLANGES)
.188
.047
2.95
.3750
.3745
1.86
SQ.
12
13
14
15
16
.150
.062
2.25 SQ.
.19
4 BOLTS/NUTS ATTACH THE
GEARHEAD TO THE MOTOR
1.5 lb.
Other gear ratios and non-NEMA size mounting

interfaces are available on special order.
MOTOR
(SOLD
SEPARATELY)
10
11
1.504
1.502
1.00
WEIGHT:
2.25
.38
CLAMP-ON PINION SUPPLIED
INCH COMPONENT
Catalog Number
Gear
Ratio
S9123A-SG003
S9123A-SG005
S9123A-SG010
S9123A-SG015
S9123A-SG020
S9123A-SG030
S9123A-SG050
S9123A-SG100
3:1
5:1
10:1
15:1
20:1
30:1
50:1
100:1
Maximum Rated
Output rpm
(4000 rpm input)
1333
800
400
267
200
133
80
40
* "S" indicates output rotates in the same direction as input; "R" denotes opposite direction.
11-72
Rotation *
Direction
S
S
S
R
R
R
R
S

PLANETARY GEARHEAD
LONG-LIFE
R
Inch
MATERIAL:

T
1
-40F to +255F
FEATURES:
Standard NEMA size.

Includes a precision balanced
clamp-on pinion.
3
.125
2.875
2.873
SPECIFICATIONS:

Axial: 125 lbf
10 arc min.
-4
5.35 x 10 ozf in. sec.2
.220 (4 HOLES)
EQ. SP. ON A
3.875 B.C.
(BOTH FLANGES)
3.00
.375
.56
5
2.879
2.877
.062
4.38
.5000
.4995
2.74
SQ.
3.25
SQ.
.150
.062
1.25
.38
7
8

WEIGHT:
3.5 lb.

To mate with D50R10-06.. motor requires nonstandard pinion
(1/2 inch bore) and mounting adapter. Add "SP" to the part
number when ordering.
MOTOR
(SOLD
SEPARATELY)
INCH COMPONENT
Catalog Number
Gear
Ratio
S9134A-SG003
S9134A-SG005
S9134A-SG010
S9134A-SG015
S9134A-SG020
S9134A-SG030
S9134A-SG050
S9134A-SG100
3:1
5:1
10:1
15:1
20:1
30:1
50:1
100:1
Maximum Rated
Output rpm
(4000 rpm input)
1333
800
400
267
200
133
80
40
Rotation *
Direction
S
S
S
S
R
R
S
S
10
11
12
13
14
15
11-73
16
I
R
T
1

PLANETARY GEARHEAD
LONG-LIFE
Inch
MATERIAL:

-40F to +255F
FEATURES:
3
4
Standard NEMA size.

SPECIFICATIONS:
5
6
7
8

Axial: 150 lbf
10 arc min.
-3
4.33 x 10 ozf in. sec.2
2.187 .156
2.185
.280 (4 HOLES)
EQ. SP. ON A
4.950 B.C.
(BOTH FLANGES)
.500
.078
5.51
3.50
SQ.
4.20 SQ.
.6250
.6245
.062
12
13
14
15
16
.175
.50

6.5 lb.

MOTOR
(SOLD
SEPARATELY)
10
11
2.191
2.189
1.50
WEIGHT:
3.75
.50
INCH COMPONENT
Catalog Number
Gear
Ratio
S9142A-SG003
S9142A-SG005
S9142A-SG010
S9142A-SG015
S9142A-SG020
S9142A-SG030
S9142A-SG050
S9142A-SG100
3:1
5:1
10:1
15:1
20:1
30:1
50:1
100:1
Maximum Rated
Output rpm
(4000 rpm input)
1333
800
400
267
200
133
80
40
11-74
Rotation *
Direction
S
S
S
R
R
S
R
S
SELECTION CHART
NEMA SIZE RIGHT ANGLE GEARHEADS
AND DUAL OUTPUT RIGHT ANGLE GEARHEADS
NEMA
Size
17
Right Angle Planetary Gearheads
Inch
0
Single- or Double-Ended
Shafts
PG, Precision Series, Low Backlash S9117D-SRPG...

(pg. 11-76)

(pg. 14-11)
EG, Economy Series S9117D-SREG...

(pg. 11-84)

(pg. 14-11)

(pg. 11-78)
23

(pg. 11-86)

(pg. 14-13)
T-Series S9123R-R...
(pg. 11-92)

(pg. 14-15)
Spur Gearhead (Planetary Gearhead Alternative)

Low-Cost & Long-Life S9123D-SRSG... (pg. 11-98)
T
1
2
3
4

(pg. 11-80)
34

(pg. 11-88)

(pg. 14-17)
T-Series S9134R-R...
(pg. 11-94)

S9134M-...HT (pg. 14-19)
Spur Gearhead (Planetary Gearhead Alternative)

5
6

(pg. 11-82)
42

(pg. 11-90)
T-Series S9142R-...
(pg. 11-96)

(pg. 14-21)

NEMA
Size
17
Dual Output Planetary Gearheads
23

(pg. 14-11)
EG, Economy Series S9117E-SDEG...

(pg. 11-110)

(pg. 14-11)

(pg. 11-112)
Low-Cost & Long-Life S9123E-SDSG... (pg. 11-118)
PG, Precision Series, Low Backlash S9134E-SDPG...
(pg. 11-106)
34

(pg. 11-114)
Low-Cost & Long-Life S9134E-SDSG... (pg. 11-119)
42

Single- or Double-Ended Shafts

(pg.11-102)

(pg. 11-104)

(pg. 11-108)
(pg. 11-116)

(pg. 14-13)
(pg. 14-15)
(pg. 14-17)
S9134M-...HT
(pg. 14-19)
(pg. 14-21)
11-75
9
10
11
12
13
14
15
16
I
R
RIGHT ANGLE PG PLANETARY GEARHEADS SIZE 17

SINGLE, DOUBLE, AND TRIPLE STAGE
PRECISION SERIES
LOW BACKLASH DESIGN
Inch
MATERIAL:
T
1

Right Angle Housing and
Bearings - Precision Tapered Roller
1
Precision
Component
2
3
4
-40F to +255F
FEATURES:

Case-hardened spiral bevel gears.
SPECIFICATIONS:
5
6
7
8

Axial: 75 lbf
Double Stage: 80%

Triple Stage: 75%



WEIGHT:
Triple Stage: 4 lb.
Other mounting interfaces are available on special order.
9
10
11
12
13
14
15
16
INCH COMPONENT
Catalog Number
S9117D-SRPG003
S9117D-SRPG004
S9117D-SRPG005H
S9117D-SRPG007
S9117D-SRPG010
S9117D-SRPG016
S9117D-SRPG022
S9117D-SRPG028
S9117D-SRPG040
S9117D-SRPG049
S9117D-SRPG055
S9117D-SRPG070
S9117D-SRPG100
* S9117D-SRPG160
* S9117D-SRPG280
* S9117D-SRPG400
* S9117D-SRPG700
L
Gear
Ratio Max.
in.
3:1
4:1
4.97
3.30
5.5:1 Single Single
7:1 Stage Stage
10:1
16:1
22:1
28:1
5.51
3.84
40:1
Double Double
49:1
Stage Stage
55:1
70:1
100:1
160:1
6.11
4.46
280:1
Triple Triple
400:1
Stage Stage
700:1
Max. Rated
Max.
Max. Rated Inertia
Inertia
Cont.
Input
Torque**
Torque
Pinion
(6500 rpm
ozf in. sec. 2
lbf in.
lbf in.
ozf in. sec. 2
Input)
167
158
143
119
56
169
171
172
174
127
156
128
52
181
183
185
136
261
248
223
158
84
264
267
269
272
199
243
201
77
283
286
286
212
2167
1625
1182
928
650
406
295
232
162
133
118
93
65
41
23
16
9
* Triple stage units are available on special order only.

** Maximum Rated Continuous Torque is rated at 3000 rpm, and a Minimum Life of 10,000 hours.
11-76
4.153 x 10-4
2.478 x 10-4
1.341 x 10-4
8.344 x 10-5
4.113 x 10-5
1.088 x 10-4
6.056 x 10-5
3.806 x 10-5
1.889 x 10-5
3.525 x 10-5
1.791 x 10-5
1.751 x 10-5
1.719 x 10-5
1.821 x 10-5
1.735 x 10-5
1.769 x 10-5
1.766 x 10-5
2.163 x 10-4
1.352 x 10-4
1.174 x 10-4
1.143 x 10-4
1.132 x 10-4
1.352 x 10-4
1.174 x 10-4
1.143 x 10-4
1.132 x 10-4
1.143 x 10-4
1.132 x 10-4
1.132 x 10-4
1.132 x 10-4
1.132 x 10-4
1.132 x 10-4
1.132 x 10-4
1.132 x 10-4

R
Inch
0
.866
.864
2.05
.047
1.65
SQ.
2.72
1.25
.094
.125
(4 HOLES)
EQ. SP. ON A
1.725 B.C.
T
1
.062
(TYP)
.56
#4-40 UNC-2B
X .250 DP.
(4 HOLES)
EQ. SP. ON A
1.725 B.C.
.3750
.3745
1.22
(TYP)
.250
2
3
(TYP)
.82
L
5
.12
.10
GEARHEAD OUTPUT VIEW
.125
(4 HOLES)
EQ. SP. ON A
1.725 B.C.
1.22
(TYP)
.868
.867
7
8
1.65
SQ.
PARTIAL MOTOR INPUT VIEW
10
11
12
13
14
15
11-77
16
I
R
T
1

PRECISION SERIES
LOW BACKLASH DESIGN
Inch
MATERIAL:

1
Precision
Component
2
3
4
-40F to +255F
FEATURES:

SPECIFICATIONS:
5
6
7
8

Axial: 600 lbf
Double Stage: 80%

Triple Stage: 75%



WEIGHT:
Single Stage: 4 lb.
Double Stage: 5 lb.
Triple Stage: 6 lb.
Non-NEMA size mounting interfaces are available on special order.
9
10
11
12
13
14
15
16
INCH COMPONENT
Catalog Number
S9123D-SRPG003
S9123D-SRPG004
S9123D-SRPG005H
S9123D-SRPG007
S9123D-SRPG010
S9123D-SRPG016
S9123D-SRPG022
S9123D-SRPG028
S9123D-SRPG040
S9123D-SRPG049
S9123D-SRPG055
S9123D-SRPG070
S9123D-SRPG100
* S9123D-SRPG160
* S9123D-SRPG280
* S9123D-SRPG400
* S9123D-SRPG700
L
Gear
Ratio Max.
in.
3:1
4:1
6.49
4.23
5.5:1 Single Single
7:1 Stage Stage
10:1
16:1
22:1
28:1
7.32
5.05
40:1
Double Double
49:1
Stage Stage
55:1
70:1
100:1
160:1
8.10
5.85
280:1
Triple Triple
400:1
Stage Stage
700:1
Max. Rated
Max.
Max. Rated Inertia
Inertia
Cont.
Input
Torque**
Torque
Pinion
(6500 rpm
ozf in. sec. 2
lbf in.
lbf in.
ozf in. sec. 2
Input)
380
360
317
263
119
376
380
384
388
286
347
288
110
404
409
406
303
594
562
496
411
179
587
594
600
607
447
542
450
164
631
640
608
473
2167
1625
1182
928
650
406
295
232
162
133
118
93
65
41
23
16
9

11-78
1.539 x 10-3
9.035 x 10-4
4.878 x 10-4
3.034 x 10-4
1.495 x 10-4
3.461 x 10-4
1.930 x 10-4
1.214 x 10-4
6.027 x 10-5
1.117 x 10-4
5.690 x 10-5
5.551 x 10-5
5.438 x 10-5
5.760 x 10-5
5.461 x 10-5
5.591 x 10-5
5.581 x 10-5
1.194 x 10-3
9.502 x 10-4
8.969 x 10-4
8.880 x 10-4
8.846 x 10-4
9.502 x 10-4
8.969 x 10-4
8.880 x 10-4
8.846 x 10-4
8.880 x 10-4
8.846 x 10-4
8.846 x 10-4
8.846 x 10-4
8.846 x 10-4
8.846 x 10-4
8.846 x 10-4
8.846 x 10-4

R
Inch
1.500
1.498
1.25
2.95
.125
.063
2.25
SQ.
3.55
.56
.205
(4 HOLES)
EQ. SP. ON
A 2.625 B.C.
T
1
.5000
.4995
1.86
(TYP)
.062 (TYP)
#10-24 UNC-2B
X .375 DP.
(4 HOLES)
EQ. SP. ON A
2.625 B.C.
.312
(TYP)
.99
L
2
3
4
.12
#10-24 UNC-2B
X .375 DP.
(4 HOLES)
EQ. SP. ON A
2.625 B.C.
5
1.504
1.503
6
1.86
(TYP)
2.25
SQ.
9
10
11
12
13
14
15
11-79
16
I
R

PRECISION SERIES
LOW BACKLASH DESIGN
Inch
MATERIAL:
T
1

1
Precision
Component
2
3
4
-40F to +255F
FEATURES:

SPECIFICATIONS:
5
6
7
8
9
10
11
12
13
14
15
16

Axial: 900 lbf
Double Stage: 80%

Triple Stage: 75%


WEIGHT:

Non-NEMA size mounting interfaces are available on special order. To mate with D50R10-06.. motor requires
nonstandard pinion (1/2 inch bore).
Add "SP" to the part number when ordering.
INCH COMPONENT
Catalog Number
S9134D-SRPG003
S9134D-SRPG004
S9134D-SRPG005H
S9134D-SRPG007
S9134D-SRPG010
S9134D-SRPG016
S9134D-SRPG022
S9134D-SRPG028
S9134D-SRPG040
S9134D-SRPG049
S9134D-SRPG055
S9134D-SRPG070
S9134D-SRPG100
* S9134D-SRPG160
* S9134D-SRPG280
* S9134D-SRPG400
* S9134D-SRPG700
L
Gear
Ratio Max.
in.
3:1
4:1
9.16
5.91
5.5:1 Single Single
7:1 Stage Stage
10:1
16:1
22:1
28:1
10.29
7.04
40:1
Double Double
49:1
Stage Stage
55:1
70:1
100:1
160:1
11.51
8.26
280:1
Triple Triple
400:1
Stage Stage
700:1
Max. Rated
Max.
Max. Rated Inertia
Inertia
Cont.
Input
Torque**
Torque
Pinion
(6500 rpm
ozf in. sec. 2
lbf in.
lbf in.
ozf in. sec. 2
Input)
1285
1219
1113
935
552
1315
1333
1346
1364
1015
1232
1027
507
1424
1445
1458
1090
2008
1905
1740
1461
828
2055
2083
2103
2132
1587
1925
1605
761
2226
2258
2278
1703
2167
1675
1182
928
650
406
295
232
162
133
118
93
65
41
23
16
9

11-80
1.176 x 10-2
6.818 x 10-3
3.693 x 10-3
2.300 x 10-3
1.134 x 10-3
2.944 x 10-3
1.644 x 10-3
1.035 x 10-3
5.139 x 10-4
9.545 x 10-4
4.861 x 10-4
4.747 x 10-4
4.654 x 10-4
4.930 x 10-4
4.676 x 10-4
4.781 x 10-4
4.772 x 10-4
4.901 x 10-3
2.522 x 10-3
2.040 x 10-3
1.955 x 10-3
1.923 x 10-3
2.522 x 10-3
2.040 x 10-3
1.955 x 10-3
1.923 x 10-3
1.955 x 10-3
1.923 x 10-3
1.923 x 10-3
1.923 x 10-3
1.923 x 10-3
1.923 x 10-3
1.923 x 10-3
1.923 x 10-3

R
Inch
2.875
2.873
.187
3.25
SQ.
2.74
(TYP)
4.38
5.14
1.50
.56
.094
#10-24 UNC-2B
X .500 DP.
(4 HOLES)
EQ. SP. ON A
3.875 B.C.
.7500
.7495
.220
(4 HOLES)
EQ. SP. ON A
3.875 B.C.
.062 (TYP)
.500
1
2
(TYP)
1.38
M
3
4
.15
#10-24 UNC-2B
X .500 DP.
(4 HOLES)
EQ. SP. ON A
3.875 B.C.
2.875
2.873
5
6
2.74
(TYP)
3.25
SQ.
8
9
10
11
12
13
14
15
11-81
16
I
R

PRECISION SERIES
LOW BACKLASH DESIGN
Inch
MATERIAL:
T
1

1
Precision
Component
2
3
4
-40F to +255F
FEATURES:

SPECIFICATIONS:
5
6
7
8
9
10
11
12
13
14
15
16

Axial: 1400 lbf
Double Stage: 80%

Triple Stage: 75%


WEIGHT:
Triple Stage: 36 lb.
INCH COMPONENT
Catalog Number
S9142D-SRPG003
S9142D-SRPG004
S9142D-SRPG005H
S9142D-SRPG007
S9142D-SRPG010
S9142D-SRPG016
S9142D-SRPG022
S9142D-SRPG028
S9142D-SRPG040
S9142D-SRPG049
S9142D-SRPG055
S9142D-SRPG070
S9142D-SRPG100
* S9142D-SRPG160
* S9142D-SRPG280
* S9142D-SRPG400
* S9142D-SRPG700
Gear
L
Ratio Max.
3:1
4:1 11.39
7.18
5.5:1 Single Single
7:1 Stage Stage
10:1
16:1
22:1
28:1
13.02
8.81
40:1
Double Double
49:1
Stage Stage
55:1
70:1
100:1
160:1
14.57
10.37
280:1
Triple Triple
400:1
Stage Stage
700:1
Max. Rated
Max.
Max. Rated Inertia
Inertia
Cont.
Input
Torque**
Torque
Pinion
(6500 rpm
ozf in. sec. 2
lbf in.
lbf in.
ozf in. sec. 2
Input)
2301
2195
2021
1711
1122
2379
2414
2438
2473
1867
2250
1890
1031
2587
2627
2651
2009
3597
3430
3159
2673
1684
3717
3772
3811
3865
2918
3516
2953
1547
4044
4105
4142
3140
2167
1675
1182
928
650
406
295
232
162
133
118
93
65
41
23
16
9

11-82
2.667 x 10-2
1.626 x 10-2
8.931 x 10-3
5.588 x 10-3
2.765 x 10-3
1.118 x 10-2
6.242 x 10-3
3.928 x 10-3
1.951 x 10-3
3.724 x 10-3
1.880 x 10-3
1.851 x 10-3
1.827 x 10-3
1.934 x 10-3
1.845 x 10-3
1.884 x 10-3
1.881 x 10-3
1.680 x 10-2
1.032 x 10-2
8.997 x 10-3
8.766 x 10-3
8.680 x 10-3
1.032 x 10-2
8.997 x 10-3
8.766 x 10-3
8.680 x 10-3
8.766 x 10-3
8.680 x 10-3
8.680 x 10-3
8.680 x 10-3
8.680 x 10-3
8.680 x 10-3
8.680 x 10-3
8.680 x 10-3

R
Inch
2.187
2.185
.250
.125
5.89
2.00
5.51
SQ. (TYP)
.280 (4 HOLES)
EQ. SP. ON A
4.950 B.C.
.63
1/4-20 UNC-2B
X .500 DP.
(4 HOLES) EQ. SP.
ON A 4.950 B.C.
1
2
.500
(TYP)
1.18
L
M
1/4-20 UNC-2B
X .500 DP. (4 HOLES)
EQ. SP. ON A 4.950 B.C.
3
4
5
.17
.062 (TYP)
1.0000
.9995
4.20 3.50
2.191
2.189
6
7
4.20
SQ.
3.50
(TYP)
8
9
10
11
12
13
14
15
11-83
16
I
R
RIGHT ANGLE EG PLANETARY GEARHEADS SIZE 17

ECONOMY SERIES
Inch
MATERIAL:
T
1

-40F to +255F
FEATURES:
3
4
5
6
7

SPECIFICATIONS:

Axial: 400 lbf
Double Stage: 80%

WEIGHT:
10
11
12
13
14
15
16

INCH COMPONENT
Catalog Number
L
Gear
Ratio Max.
in.
S9117D-SREG003
S9117D-SREG004
S9117D-SREG005H
S9117D-SREG007
S9117D-SREG010
S9117D-SREG016
S9117D-SREG022
S9117D-SREG028
S9117D-SREG040
S9117D-SREG049
S9117D-SREG055
S9117D-SREG070
S9117D-SREG100
3:1
4:1
4.97
3.30
5.5:1 Single Single
7:1 Stage Stage
10:1
16:1
22:1
28:1
5.62
3.97
40:1
Double Double
49:1
Stage Stage
55:1
70:1
100:1
Max. Rated
Max.
Max. Rated Inertia
Inertia
Cont.
Input
Torque*
Torque
Pinion
(5000 rpm
ozf in. sec. 2
lbf in.
lbf in.
ozf in. sec. 2
Input)
125
119
107
89
56
127
128
129
131
95
117
96
52
174
165
149
124
84
176
178
179
181
132
162
134
77
1666
1250
909
714
500
312
227
178
125
102
91
71
50
11-84
1.669 x 10-4
1.053 x 10-4
5.870 x 10-5
3.692 x 10-5
1.833 x 10-5
1.045 x 10-4
5.830 x 10-5
3.667 x 10-5
1.821 x 10-5
3.479 x 10-5
1.755 x 10-5
1.729 x 10-5
1.708 x 10-5
2.163 x 10-4
1.352 x 10-4
1.174 x 10-4
1.143 x 10-4
1.132 x 10-4
1.352 x 10-4
1.174 x 10-4
1.143 x 10-4
1.132 x 10-4
1.143 x 10-4
1.132 x 10-4
1.132 x 10-4
1.132 x 10-4

R
Inch
.866
.864
2.72
1.25
.094
2.05
.047
.56
1.65 1.22
SQ. (TYP)
.125
.062 (TYP)
.3750
.3745
(4 HOLES)
EQ. SP. ON
A 1.725 B.C.
#4-40 UNC-2B
X .250 DP.
(4 HOLES)
EQ. SP. ON A
1.725 B.C.
.250
(TYP)
.82
L
M
2
3
4
.12
5
.125
(4 HOLES)
EQ. SP. ON
A 1.752 B.C.
.10
1.22
(TYP)
.868
.867
1.65
SQ.
9
10
11
12
13
14
15
11-85
16
I
R

ECONOMY SERIES
Inch
MATERIAL:
T
1

-40F to +255F
FEATURES:
3
4
5
6
7

SPECIFICATIONS:

Axial: 600 lbf
Double Stage: 80%

WEIGHT:
10
11
12
13
14
15
16

INCH COMPONENT
Catalog Number
L
Gear
Ratio Max.
in.
S9123D-SREG003
S9123D-SREG004
S9123D-SREG005H
S9123D-SREG007
S9123D-SREG010
S9123D-SREG016
S9123D-SREG022
S9123D-SREG028
S9123D-SREG040
S9123D-SREG049
S9123D-SREG055
S9123D-SREG070
S9123D-SREG100
3:1
4:1
6.78
4.51
5.5:1 Single Single
7:1 Stage Stage
10:1
16:1
22:1
28:1
7.68
5.41
40:1
Double Double
49:1
Stage Stage
55:1
70:1
100:1
Max. Rated
Max.
Max. Rated Inertia
Inertia
Cont.
Input
Torque*
Torque
Pinion
(5000 rpm
ozf in. sec. 2
lbf in.
lbf in.
ozf in. sec. 2
Input)
285
264
238
197
119
282
285
288
291
213
260
215
110
396
366
330
274
179
391
396
400
405
295
362
298
164
1666
1250
909
714
500
312
227
178
125
102
91
71
50
11-86
4.866 x 10-4
3.113 x 10-4
1.746 x 10-4
1.100 x 10-4
5.471 x 10-5
3.287 x 10-4
1.838 x 10-4
1.157 x 10-4
5.749 x 10-5
1.098 x 10-4
5.543 x 10-5
5.460 x 10-5
5.393 x 10-5
1.194 x 10-3
9.502 x 10-4
8.969 x 10-4
8.880 x 10-4
8.846 x 10-4
9.502 x 10-4
8.969 x 10-4
8.880 x 10-4
8.846 x 10-4
8.880 x 10-4
8.846 x 10-4
8.846 x 10-4
8.846 x 10-4

R
Inch
1.500
1.498
2.95
SQ.
.062 (TYP)
.063
2.25
3.55
1.25
.125
.56
1.86
(TYP)
#10-24 UNC-2B
X .375 DP.
(4 HOLES)
EQ. SP. ON A
2.625 B.C.
.5000
.4995
.205
(4 HOLES)
.312
EQ. SP. ON
(TYP)
A 2.625 B.C.
.99
L
M
2
3
4
.25
.12
1.504
1.503
.20
(4 HOLES)
EQ. SP. ON
A 2.625 B.C.
1.86
(TYP)
6
7
2.25
SQ.
9
10
11
12
13
14
15
11-87
16
I
R

ECONOMY SERIES
Inch
MATERIAL:
T
1

-40F to +255F
FEATURES:
3
4
5
6
7
8
9

SPECIFICATIONS:

Axial: 900 lbf
Double Stage: 80%

WEIGHT:
To mate with D50R10-06.. motor requires nonstandard pinion (1/2 inch bore).
10
INCH COMPONENT
11
12
13
14
15
16
Catalog Number
L
Gear
Ratio Max.
in.
S9134D-SREG003
S9134D-SREG004
S9134D-SREG005H
S9134D-SREG007
S9134D-SREG010
S9134D-SREG016
S9134D-SREG022
S9134D-SREG028
S9134D-SREG040
S9134D-SREG049
S9134D-SREG055
S9134D-SREG070
S9134D-SREG100
3:1
4:1
5.5:1
7:1
10:1
16:1
22:1
28:1
40:1
49:1
55:1
70:1
100:1
9.53
Single
Stage
Max. Rated
Max.
Max. Rated Inertia
Inertia
Cont.
Input
Torque*
Torque
Pinion
(5000 rpm
ozf in. sec. 2
lbf in.
lbf in.
ozf in. sec. 2
Input)
6.27
Single
Stage
7.54
10.80
Double Double
Stage Stage
964
914
835
701
507
986
1000
1009
1023
762
924
770
507
1339
1270
1160
934
704
1370
1389
1402
1421
1058
1283
1070
761
1666
1250
909
714
500
312
227
178
125
102
91
71
50
11-88
4.672 x 10-3
2.833 x 10-3
1.585 x 10-3
9.983 x 10-4
4.961 x 10-4
2.824 x 10-3
1.580 x 10-3
9.952 x 10-4
4.946 x 10-4
9.417 x 10-4
4.759 x 10-4
4.684 x 10-4
4.623 x 10-4
4.901 x 10-3
2.522 x 10-3
2.040 x 10-3
1.955 x 10-3
1.923 x 10-3
2.522 x 10-3
2.040 x 10-3
1.955 x 10-3
1.923 x 10-3
1.955 x 10-3
1.923 x 10-3
1.923 x 10-3
1.923 x 10-3

R
Inch
2.875
2.873
4.38
.187
.094
5.14
1.50
.062 (TYP)
.56
#10-24 UNC-2B
X .500 DP.
(4 HOLES)
EQ. SP. ON A
3.875 B.C.
3.25 2.74
SQ. (TYP)
.7500
.7495
.220
(4 HOLES)
EQ. SP. ON A
3.875 B.C.
T
1
2
.500
(TYP)
1.38
.50
.15
#10-24 UNC-2B
X .500 DP.
(4 HOLES)
EQ. SP. ON A
3.875 B.C.
5
2.875
2.873
6
7
3.25
SQ.
2.74
(TYP)
8
9
10
11
12
13
14
15
11-89
16
I
R

ECONOMY SERIES
Inch
MATERIAL:
T
1

-40F to +255F
FEATURES:
3
4
5
6
7

SPECIFICATIONS:

Axial: 1400 lbf
Double Stage: 80%

WEIGHT:
10
11
12
13
14
15
16

INCH COMPONENT
Catalog Number
L
Gear
Ratio Max.
in.
S9142D-SREG003
S9142D-SREG004
S9142D-SREG005H
S9142D-SREG007
S9142D-SREG010
S9142D-SREG016
S9142D-SREG022
S9142D-SREG028
S9142D-SREG040
S9142D-SREG049
S9142D-SREG055
S9142D-SREG070
S9142D-SREG100
3:1
4:1 11.85
7.64
5.5:1 Single Single
7:1 Stage Stage
10:1
16:1
22:1
28:1
9.24
13.45
40:1
Double Double
49:1
Stage Stage
55:1
70:1
100:1
Max. Rated
Max.
Max. Rated Inertia
Inertia
Cont.
Input
Torque*
Torque
Pinion
(5000 rpm
ozf in. sec. 2
lbf in.
lbf in.
ozf in. sec. 2
Input)
1726
1646
1516
1283
936
1784
1810
1829
1855
1400
1688
1417
1024
2398
2287
2106
1782
1300
2478
2515
2540
2577
1945
2344
1969
1423
1666
1250
909
714
500
312
227
178
125
102
91
71
50
11-90
1.641 x 10-2
1.049 x 10-2
5.878 x 10-3
3.704 x 10-3
1.841 x 10-3
1.101 x 10-2
6.156 x 10-3
3.875 x 10-3
1.925 x 10-3
3.706 x 10-3
1.866 x 10-3
1.843 x 10-3
1.823 x 10-3
1.680 x 10-2
1.032 x 10-2
8.997 x 10-3
8.766 x 10-3
8.680 x 10-3
1.032 x 10-2
8.997 x 10-3
8.766 x 10-3
8.680 x 10-3
8.766 x 10-3
8.680 x 10-3
8.680 x 10-3
8.680 x 10-3

R
Inch
2.187
2.185
5.51
.250
.125
5.89
2.00
.63
1/4-20 UNC-2B
X .500 DP.
(4 HOLES)
EQ. SP. ON A
4.950 B.C.
4.20 3.50
SQ. (TYP)
.280
(4 HOLES)
EQ. SP. ON A
4.950 B.C.
.062 (TYP)
1.0000
.9995
.500
1
2
(TYP)
1.18
L
M
.28
(4 HOLES)
EQ. SP. ON A
4.950 B.C.
3
4
.50
.17
2.191
2.189
6
4.20
SQ.
3.50
(TYP)
8
9
10
11
12
13
14
15
11-91
16
T-SERIES RIGHT ANGLE PLANETARY GEARHEADS NEMA SIZE 23

SINGLE, DOUBLE AND TRIPLE STAGE
R
T
MATERIAL:

Bearings - Tapered Roller
Inch
3
4
5
FEATURES:

SPECIFICATIONS:
Values in graph are rpm

Axial (Fa): See table
Double Stage: 93%
Triple Stage: 88%

Distance X (mm)
WEIGHT:
6
7
8
9
10
11
12
13
14
15
16
300
50
250
100
200
250
150
500
1000
100
10
15
20
25
1112
890
667
445
50
Single Stage: 3 lb. (1.4 kg)

Triple Stage: 3.8 lb. (1.7 kg)
1334
222
0
0.2
0.4
0.6
0.8
-29F to +250F (-34C to +121C)
Distance X (in.)
INCH COMPONENT
CATALOG NUMBER
*S9123R-R
Mounting Bracket
Code
1, 2 or 3
Gear
Ratio
Ratio
Code
3:1
003
5:1
005
10:1
010
15:1
015
25:1
025
30:1
030
50:1
050
100:1
100
Ratio
Code
Fr
Sleeve Code
A, B, C, D, E,
F, G, H or I
4.31 (109.5)
3.11 (79)
Single Stage Single Stage
4.99 (127)
3.79 (96)
Double Stage Double Stage
5.68 (144)
4.48 (114)
Triple Stage Triple Stage
Speed
Fa
Axial Load Fa
Inertia
Max.
Max.
Reflected
Rated
Max.
Rated
Back to
Cont.
Cont. Momentary
Motor Shaft
Torque at Torque at Torque
1000 rpm 5000 rpm lbf in. (Nm) lbf in. sec.2 x 10-4
lbf in. (Nm)
lbf in. (Nm)
83
(9)
179
(20)
157
(18)
100
(11)
60
(7)
102
(12)
62
(7)
163
(18)
68
(8)
138
(16)
130
(15)
83
(9)
50
(6)
94
(11)
57
(6)
161
(18)
11-92
rpm
50
100
250
500
1000
N (lbf)
250 (1110)
200 (890)
150 (670)
120 (530)
90 (400)
Torsional
Stiffness
lbf in. / arc min.
(Nm / arc min.)
(kg cm2)
270
(31)
366
(41)
366
(41)
297
(34)
198
(22)
305
(34)
203
(23)
366
(41)
3.09
(0.35)
3.69
(0.42)
3.48
(0.39)
2.89
(0.33)
2.71
(0.31)
2.83
(0.32)
2.64
(0.3)
3.50
(0.4)
9.6
(1.1)
10.3
(1.2)
6.6
(0.7)
9.8
(1.1)
9.8
(1.1)
8.0
(0.9)
9.6
(1.1)
6.5
(0.7)

R
Inch
3.32
(84.3)
2.12
(53.8)
.25 (6.4)
1.500 (38)
1.499 (38.07)
1.00
(25.4)
.75
(19.1) .3750 (9.525)
.3745 (9.512)
FLAT
.360 (FLAT)
(9.1)
2.27 SQ.
(57.7)
.062
(1.57)
.14
(3.56)
.195 (4.95) THRU

HOLES A PL. EQ.
SPACED ON A
2.625 (66.68)
BOLT CIRCLE
1
2
L
K
2.40 SQ.
(61)
MOUNTING
BRACKET
SHOWN
ATTACHED
4
5
A
X
B
.675
(17.1)
.68
(17.3)
E*
ACCESS
HOLES FOR
X
MOTOR SHAFT
CLAMP. UNIT MAY
BE SUPPLIED
WITH 2 OR 4 HOLES.
C THREAD
ON A D
BOLT CIRCLE
BORE
SECTION Y-Y
MOTOR SHAFT SLEEVE
SECTION X-X
10
MOUNTING BRACKET
11
Mounting Bracket
Code
2.4
(61)
2.4
(61)
3.54
(89.9)
1.22
(31)
1.22
(31)
1.47
(37.3)
2
3
C
M4
M4
M6
D
2.625
(66.7)
2.756
(70)
3.937
(100)
E*
Dia.
1.984
(50.4)
1.984
(50.4)
3.165
(80.4)
F
.15
(3.8)
.15
(3.8)
.15
(3.8)
Motor Shaft
Sleeve Code
Motor Shaft Length

(max. min.)
1.28 0.65
(32.5 16.5)
1.28 0.65
(32.5 16.5)
1.53 0.9
(38.9 22.9)

Code
Bore
A
B
C
D
E
F
G
H
I
.250
.3125
.375
.500
8 mm
9 mm
10 mm
11 mm
14 mm
11-93
12
13
14
15
16

R
T
MATERIAL:

Inch
-29F to +250F (-34C to +121C)
3
4
5
6
7

SPECIFICATIONS:

Double Stage: 93%
Triple Stage: 88%


Triple Stage: 8.8 lb. (4 kg)
8
9
Mounting Bracket
Code
1, 2 or 3
11
Gear
Ratio
Ratio
Code
3:1
003
5:1
005
10:1
010
15:1
015
25:1
025
14
30:1
030
50:1
050
15
100:1
100
12
13
16
500
WEIGHT:
INCH COMPONENT
CATALOG NUMBER
*S9134R-R
10
Ratio
Code
11-94
890
445
100
0
0.2
0.4
0.6
0.8
1.0
Distance X (in.)
7.56 (192)
5.79 (147)
Speed
X
Fr
Sleeve Code
A, B, C, D, E
or F
6.66 (169)
4.89 (124)
2224
1334
250
500
1000
200
30
1779
100
300
* To be discontinued
when present stock
is depleted
25
50
400
5.76 (146)
3.99 (101)
Distance X (mm)
10
15
20
Fa
rpm
50
100
250
500
1000
lbf in. (Nm)
251
(28)
508
(57)
462
(52)
305
(34)
172
(19)
311
(35)
175
(20)
480
(54)
207
(23)
420
(47)
381
(143)
251
(28)
142
(16)
285
(32)
160
(18)
472
(53)
(kg
905
(102)
1113
(126)
1113
(126)
1018
(115)
635
(72)
1045
(118)
653
(74)
1113
(126)
Axial Load Fa
Inertia
Max.
Max.
Reflected
Rated
Max.
Rated
Back to
Cont.
Cont. Momentary
Motor Shaft
lbf in. (Nm)
1.2
FEATURES:
lbf (N)
340 (1510)
270 (1200)
200 (890)
160 (710)
130 (580)
Torsional
Stiffness
lbf in. / arc min.
(Nm / arc min.)
cm2)
12.1
(1.37)
14.5
(1.64)
13.7
(1.54)
11.3
(1.28)
10.6
(1.2)
11.1
(1.25)
10.4
(1.18)
13.7
(1.55)
21.5
(2.4)
23.1
(2.6)
14.8
(1.7)
21.9
(2.5)
21.9
(2.5)
17.9
(2)
21.4
(2.4)
14.6
(1.7)

R
Inch
2.47
(63)
4.24
(108)
1.25
(32.8)
.375
(9.5)
.75
(19.1) .5000 (12.7)
.4995 (12.687)
1/8"(3.2)
AMERICAN
STD SQ. KEY
2.875 (73.03)
2.874 (73)
3.25 SQ.
(82.6)
0.14
.062 (3.5)
(1.57)
.17
(4.32)
L
K
3.54 SQ.
(90)
MOUNTING
BRACKET
SHOWN
ATTACHED
.556
(14.1)
.218 (5.54) THRU

HOLES 4 PL. EQ.
SPACED ON A
3.875 (98.43)
BOLT CIRCLE
4
5
A
X
B
.875
(22.2)
6
.83
(21.1)
E*
BORE
ACCESS
HOLES FOR
X
MOTOR SHAFT
CLAMP. UNIT MAY
BE SUPPLIED
WITH 2 OR 4 HOLES.
C THREAD
ON A D
BOLT CIRCLE
Y
SECTION Y-Y
MOTOR SHAFT SLEEVE
F
SECTION X-X
Mounting Bracket
1
2
3
3.54
(89.9)
3.54
(89.9)
4.53
(115.1)
1.735
(44.1)
1.735
(44.1)
2.470
(62.7)
C
M5
M6
M8
D
3.87
(98.3)
3.94
(100)
5.71
(145)
E*
F
Dia.
.20
3.165
(80.4) (5.1)
.20
3.165
(80.4) (5.1)
4.345
.58
(110.4) (14.7)

* Pilot diameter is a clearance diameter and
should not be used to center the gearhead.
9
10
MOUNTING BRACKET
Code
Motor Shaft
Sleeve Code
Motor Shaft Length

(max. min.)
1.53 0.61
(38.9 15.5)
1.79 0.88
(45.5 22.4)
1.79 0.88
(45.5 22.4)
Code
Bore
A
B
C
D
E
F
.375
.500
.625
14 mm
16 mm
19 mm
11
12
13
14
15
11-95
16

SINGLE, DOUBLE AND TRIPLE STAGE
R
T
MATERIAL:

Inch
3
4
5
FEATURES:

SPECIFICATIONS:

Double Stage: 93%
Triple Stage: 88%

700
WEIGHT:
6
7

Triple Stage: 17.6 lb. (8.0 kg)
INCH COMPONENT
CATALOG NUMBER
*S9142R-R
Mounting Bracket
Code
1, 2 or 3
10
11
Gear
Ratio
Ratio
Code
3:1
003
5:1
005
10:1
010
13
15:1
015
25:1
025
14
30:1
030
50:1
050
100:1
100
12
15
Ratio
Code
11-96
0.4
8.90 (226)
6.63 (168.4)
10.13 (257)
7.87 (200)
30
35
50
100
250
500
1000
0.6 0.8 1.0 1.2 1.4

Distance X (in.)
Speed
X
Fr
Sleeve Code
A, B, C, D, E,
F, G, H or I
7.67 (195)
5.40 (137)
16
* To be discontinued
when present stock
is depleted
0.2
600
500
400
300
200
100
0
Distance X (mm)
10
15 20
25
Fa
rpm
50
100
250
500
1000
lbf in. (Nm)
687
(78)
1346
(152)
1072
(121)
832
(94)
416
(47)
851
(96)
425
(48)
1114
(126)
567
(64)
958
(108)
885
(100)
687
(78)
343
(39)
778
(88)
388
(44)
1095
(124)
(kg
2039
(230)
2255
(255)
2255
(255)
822
(93)
1450
(165)
2255
(255)
1499
(169)
2255
(255)
3114
2669
2224
1779
1334
890
1.6
445
0
Axial Load Fa
Inertia
Max.
Max.
Reflected
Rated
Max.
Rated
Back to
Cont.
Cont. Momentary
Motor Shaft
lbf in. (Nm)
40
-29F to +250F (-34C to +121C)
N (lbf)
460 (2050)
370 (1650)
270 (1200)
210 (930)
170 (760)
Torsional
Stiffness
lbf in. / arc min.
(Nm / arc min.)
cm2)
20.6
(2.33)
24.6
(2.78)
23.2
(2.63)
19.3
(2.18)
18
(2.04)
18.9
(2.13)
17.6
(1.99)
23.3
(2.64)
28.0
(3.2)
30.0
(3.4)
20.1
(2.3)
28.8
(3.3)
28.8
(3.3)
24.6
(2.8)
28.5
(3.2)
19.9
(2.2)

R
Inch
3.02
(77)
5.28
(134)
1.00
(25.4)
.50 (12.7)
.6250 (15.875)
.6245 (15.862)
.093
(2.36)
.21
(5.33)
.281 (7.14) THRU

HOLES A PL. EQ.
SPACED ON A
4.950 (25.73)
BOLT CIRCLE
4.53 SQ.
(115)
MOUNTING
BRACKET
SHOWN
ATTACHED
T
1
.706
(17.9)
4.25 SQ.
(108)
.17
(4.4)
3/16" (4.8) AMERICAN

STD SQ. KEY
2.187 (55.55)
2.186 (55.52)
.875
(22.2)
4
5
A
X
B
1.125
(28.58)
1
(25.4)
E*
ACCESS
HOLES FOR
X
MOTOR SHAFT
CLAMP. UNIT MAY
BE SUPPLIED
WITH 2 OR 4 HOLES.
C THREAD
ON A D
BOLT CIRCLE
BORE
SECTION Y-Y
MOTOR SHAFT SLEEVE
10
MOUNTING BRACKET
11
Mounting Bracket
Code
1
2
3
4
A
4.53
(115.1)
4.53
(115.1)
4.92
(125)
5.59
(142)
1.925
M6
(48.9)
1.925
M6
(48.9)
2.36
M8
(59.9)
2.36
(59.9) M10
D
4.95
(126)
3.94
(100)
5.71
(145)
6.50
(165)
SECTION X-X
E*
F
Dia.
3.165
.25
(80.4) (6.4)
.25
3.165
(80.4) (6.4)
4.345
.58
(110.4) (14.7)
5.134
.58
(130.4) (14.7)
Motor Shaft
Sleeve Code
Motor Shaft Length

(max. min.)
2.12 0.99
(53.8 25.1)
2.12 0.99
(53.8 25.1)
2.56 1.42
(65.0 36.0)
2.56 1.42
(65.0 36.0)
Code
Bore
A
B
C
D
E
F
G
.625
1.000
14 mm
16 mm
19 mm
22 mm
24 mm
12
13
14

15
11-97
16
I
R
T
1
2
3
4
5
6
7
8
RIGHT ANGLE SPUR GEARHEADS NEMA SIZE 23

PLANETARY SYSTEM
LONG-LIFE DESIGN
Inch
MATERIAL:

-40F to +255F
4.92
.312
(TYP)
FEATURES:

clamp-on pinion.
3.55
2.67
.19
.12
#10-24 UNC-2B
X.375 DP
(4 HOLES) EQ. SP.
ON 2.625 B.C.
.062
(TYP)
SPECIFICATIONS:

Axial: 300 lbf
1.25
15 arc min.
.125
-5
2.58 x 10 ozf in. sec.2
WEIGHT:
10
Other gear ratios and non-NEMA size mounting interfaces

12
13
14
.5000
.4995
.56
.063
.205
(4 HOLES)
EQ. SP. ON
A 2.625 B.C.
1.86
(TYP)
PARTIAL MOTOR
INPUT VIEW
.205
(4 HOLES)
EQ. SP. ON
A 2.625 B.C.
1.500
1.498
1.86
(TYP)
2.95
2.25 SQ.
GEARHEAD
OUTPUT VIEW
4 lb.
INCH COMPONENT
Catalog Number
Gear
Ratio
S9123D-SRSG003
S9123D-SRSG005
S9123D-SRSG010
S9123D-SRSG015
S9123D-SRSG020
S9123D-SRSG030
S9123D-SRSG050
S9123D-SRSG100
3:1
5:1
10:1
15:1
20:1
30:1
50:1
100:1
Maximum Rated
Output rpm
(4000 rpm input)
Rotation *
Direction
1333
800
400
267
200
133
80
40
S
S
S
R
R
R
R
S
15
16
2.25 SQ.
1.504
1.503
.99
11
11-98

PLANETARY SYSTEM
LONG-LIFE DESIGN
R
Inch
MATERIAL:

T
1
-40F to +255F
6.74
.312
(TYP)
FEATURES:

clamp-on pinion.
3.49
.38
.15
#10-24 UNC-2B
X .500 DP
(4 HOLES) EQ. SP.
ON 3.875 B.C.
5.14
.062
(TYP)
SPECIFICATIONS:

Axial: 500 lbf
15 arc min.
-4
2.09 x 10 ozf in. sec.2
WEIGHT:
9 lb.
1.50
.7500
.7495
.094
.220
(4 HOLES)
EQ. SP. ON
A 3.875 B.C.
3
4
2.881
2.879
1.38
.56
3.25 SQ.
2.74
(TYP)
PARTIAL MOTOR
INPUT VIEW
.220
(4 HOLES)
EQ. SP. ON
A 3.875 B.C.
5
6
7
.187
2.875
2.873
2.74
(TYP)
3.25 SQ.
4.38
GEARHEAD
OUTPUT VIEW

To mate with D50R10-06... motors requires nonstandard pinions (1/2 inch bore)
and mounting adapter. Add "SP" to the part number when ordering.
10
11
INCH COMPONENT
Catalog Number
Gear
Ratio
S9134D-SRSG003
S9134D-SRSG005
S9134D-SRSG010
S9134D-SRSG015
S9134D-SRSG020
S9134D-SRSG030
S9134D-SRSG050
S9134D-SRSG100
3:1
5:1
10:1
15:1
20:1
30:1
50:1
100:1
Maximum Rated
Output rpm
(4000 rpm input)
1333
800
400
267
200
133
80
40
Rotation *
Direction
12
S
S
S
S
R
R
S
S
13
14
15
11-99
16
I
R
T
1
2
3
4
5
6
7
8

PLANETARY SYSTEM
LONG-LIFE DESIGN
Inch
MATERIAL:

-40F to +255F
FEATURES:

clamp-on pinion.
5.89
.062
(TYP)
Axial: 700 lbf
2.00
.63
15 arc min.
-4
.250
6.69 x 10 ozf in. sec.2
SPECIFICATIONS:
10

13
14
15
16
8.21
.500
(TYP)
WEIGHT:
12
11
24 lb.
4.01
.50
.18
1/4-20 UNC-2B
X .500 DP.
(4 HOLES)
EQ. SP. ON A
4.950 B.C.
2.186
2.184
.280
(4 HOLES)
EQ. SP. ON A
4.950 B.C.
1.18
.125
1.0000
.9995
3.50
(TYP)
4.20 SQ.
PARTIAL MOTOR
INPUT VIEW
.280
(4 HOLES)
EQ. SP. ON
A 4.950 B.C.
2.187
2.185
3.50
(TYP)
4.20 SQ.
5.51
GEARHEAD
OUTPUT VIEW
INCH COMPONENT
Catalog Number
Gear
Ratio
S9142D-SRSG003
S9142D-SRSG005
S9142D-SRSG010
S9142D-SRSG015
S9142D-SRSG020
S9142D-SRSG030
S9142D-SRSG050
S9142D-SRSG100
3:1
5:1
10:1
15:1
20:1
30:1
50:1
100:1
Maximum Rated
Output rpm
(4000 rpm input)
1333
800
400
267
200
133
80
40
11-100
Rotation *
Direction
S
S
S
R
R
S
R
S
INERTIA MATCHING EXAMPLE

R
Inch
LOAD INERTIA
1.567E-01 ozf in. sec.2
T
1
GEARHEAD
MOTOR ROTOR INERTIA
518E-03 ozf in. sec.2
2
3
4
5
SYSTEM INERTIA
6
7
Formula:

System Inertia = Gearhead Inertia + Pinion Inertia + Load Inertia2

(Gear Ratio )
Given:

Size 23 5.5:1 Gearhead Inertia = 1.746E-04 ozf in. sec.2

Size 23 5.5:1 Pinion Inertia = 9.062E-04 ozf in. sec.2
Load Inertia = 1.567E-01 ozf in. sec.2
Motor Inertia = 5.18E-03 ozf in. sec.2
Solution:

2
System Inertia = 1.746E-04 ozf in. sec.2 + 9.062E-04 ozf in. sec.2 + 1.567E-01 ozf in. sec.
2
(5.5)
2
System Inertia = 6.26E-03 ozf in. sec.
Ratio of the System Inertia to (:) The Motor Rotor Inertia = (6.26E-03 ozf in. sec.2) : (5.18E-03 ozf in. sec.2)
-OR-
Other Application Parameters to Consider:
10
1.2 to 1 (Inertia Match)
11
Ideal Inertia Match of 1:1

Yields a Very Fast
System Response
12
Torque Requirements
Speed Requirements
Response Requirements
Stiffness Requirements
Resolution Requirements
13
14
15
11-101
16
I
R
T
1
2
DUAL-OUTPUT PG PLANETARY GEARHEADS SIZE 17

RIGHT ANGLE
PRECISION SERIES
LOW BACKLASH DESIGN
Inch
MATERIAL:

1
Precision
Component
-40F to +255F
FEATURES:
3
4
5
6
7
8
9
10
11
12
13
14
15
16

Woodruff keys #303 and motor mounting hardware kit supplied.
SPECIFICATIONS:

Axial: 75 lbf
Double Stage: 80%

Triple Stage: 75%



WEIGHT:
INCH COMPONENT
Catalog Number
S9117E-SDPG003
S9117E-SDPG004
S9117E-SDPG005H
S9117E-SDPG007
S9117E-SDPG010
S9117E-SDPG016
S9117E-SDPG022
S9117E-SDPG028
S9117E-SDPG040
S9117E-SDPG049
S9117E-SDPG055
S9117E-SDPG070
S9117E-SDPG100
* S9117E-SDPG160
* S9117E-SDPG280
* S9117E-SDPG400
* S9117E-SDPG700
L
Gear
Ratio Max.
in.
3:1
4:1
4.97
3.30
5.5:1 Single Single
7:1 Stage Stage
10:1
16:1
22:1
28:1
5.51
3.84
40:1
Double Double
49:1
Stage Stage
55:1
70:1
100:1
160:1
4.46
6.11
280:1
Triple Triple
400:1
Stage Stage
700:1
Max. Rated
Max.
Max. Rated Inertia
Inertia
Cont.
Input
Torque**
Torque
Pinion
(6500 rpm
ozf in. sec. 2
lbf in.
lbf in.
ozf in. sec. 2
Input)
167
158
143
119
56
169
171
172
174
127
156
128
52
181
183
185
136
261
248
223
158
84
264
267
269
272
199
243
201
77
283
286
286
212
2166
1625
1182
928
650
406
295
232
162
132
118
92
65
41
23
16
9

11-102
4.153 x 10-4
2.478 x 10-4
1.341 x 10-4
8.344 x 10-5
4.113 x 10-5
1.088 x 10-4
6.056 x 10-5
3.806 x 10-5
1.889 x 10-5
3.525 x 10-5
1.791 x 10-5
1.751 x 10-5
1.719 x 10-5
1.821 x 10-5
1.735 x 10-5
1.769 x 10-5
1.766 x 10-5
2.163 x 10-4
1.352 x 10-4
1.174 x 10-4
1.143 x 10-4
1.132 x 10-4
1.352 x 10-4
1.174 x 10-4
1.143 x 10-4
1.132 x 10-4
1.143 x 10-4
1.132 x 10-4
1.132 x 10-4
1.132 x 10-4
1.132 x 10-4
1.132 x 10-4
1.132 x 10-4
1.132 x 10-4

RIGHT ANGLE
R
Inch
0
.866
.864
1.65
SQ.
1.22
(TYP)
1.25
.094
2.72
(TYP)
2.05
#4-40 UNC-2B
X .250 DP.
(4 HOLES)
EQ. SP. ON A
1.725 B.C.
.062
(TYP)
.56
.047
.3750
.3745
.125
(4 HOLES)
EQ. SP. ON A
1.725 B.C.
.250
(TYP)
3
.82
.12
.10
.125
(4 HOLES)
EQ. SP. ON A
1.725 B.C.
.866
.864
7
1.22
(TYP)
1.65
SQ.
8
9
10
11
12
13
14
15
11-103
16
I
R
T
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16

RIGHT ANGLE
PRECISION SERIES
LOW BACKLASH DESIGN
Inch
MATERIAL:

1
Precision
Component
-40F to +255F
FEATURES:

SPECIFICATIONS:

Axial: 600 lbf
Double Stage: 80%

Triple Stage: 75%



WEIGHT:
Single Stage: 4 lb.
Double Stage: 5 lb.
Triple Stage: 6 lb.
INCH COMPONENT
Catalog Number
S9123E-SDPG003
S9123E-SDPG004
S9123E-SDPG005H
S9123E-SDPG007
S9123E-SDPG010
S9123E-SDPG016
S9123E-SDPG022
S9123E-SDPG028
S9123E-SDPG040
S9123E-SDPG049
S9123E-SDPG055
S9123E-SDPG070
S9123E-SDPG100
*S9123E-SDPG160
*S9123E-SDPG280
*S9123E-SDPG400
*S9123E-SDPG700
L
Gear
Ratio Max.
in.
3:1
4:1
6.49
4.23
5.5:1 Single Single
7:1 Stage Stage
10:1
16:1
22:1
28:1
7.32
5.05
40:1
Double Double
49:1
Stage Stage
55:1
70:1
100:1
160:1
5.85
8.10
280:1
Triple Triple
400:1
Stage Stage
700:1
Max. Rated
Max.
Max. Rated Inertia
Inertia
Cont.
Input
Torque**
Torque
Pinion
(6500 rpm
ozf in. sec. 2
lbf in.
lbf in.
ozf in. sec. 2
Input)
380
360
317
263
119
376
380
384
388
286
347
288
110
404
409
406
303
594
562
496
411
179
587
594
600
607
447
542
450
164
631
640
608
473
2167
1675
1182
928
650
406
295
232
162
132
118
92
65
41
23
16
9

11-104
1.539 x 10-3
9.035 x 10-4
4.878 x 10-4
3.034 x 10-4
1.495 x 10-4
3.461 x 10-4
1.930 x 10-4
1.214 x 10-4
6.027 x 10-5
1.117 x 10-4
5.690 x 10-5
5.551 x 10-5
5.438 x 10-5
5.760 x 10-5
5.461 x 10-5
5.591 x 10-5
5.581 x 10-5
1.194 x 10-3
9.502 x 10-4
8.969 x 10-4
8.880 x 10-4
8.846 x 10-4
9.502 x 10-4
8.969 x 10-4
8.880 x 10-4
8.846 x 10-4
8.880 x 10-4
8.846 x 10-4
8.846 x 10-4
8.846 x 10-4
8.846 x 10-4
8.846 x 10-4
8.846 x 10-4
8.846 x 10-4

RIGHT ANGLE
R
Inch
1.500
1.498
2.25
SQ.
3.55
1.25
.125
2.95
.56
.063
1
2
.312
(TYP)
#10-24 UNC-2B
X .375 DP.
(4 HOLES)
EQ. SP. ON A
2.625 B.C.
1.86
(TYP)
.5000
.4995
.205
(4 HOLES)
EQ. SP. ON
A 2.625 B.C.
.99
L
M
4
5
.12
.062 (TYP)
1.504
1.503
#10-24 UNC-2B
X .375 DP.
(4 HOLES)
EQ. SP. ON
A 2.625 B.C.
1.86
(TYP)
6
7
2.25
SQ.
8
9
10
11
12
13
14
15
11-105
16
I
R
T
1
2
3
4
5
6
7
8
9

RIGHT ANGLE
PRECISION SERIES
LOW BACKLASH DESIGN
Inch
MATERIAL:

1
Precision
Component
-40F to +255F
FEATURES:

SPECIFICATIONS:

Axial: 900 lbf
Double Stage: 80%

Triple Stage: 75%



WEIGHT:

To mate with D50R10-06.. motors requires nonstandard pinions (1/2 inch bore).
INCH COMPONENT
10
11
12
13
14
15
16
Catalog Number
S9134E-SDPG003
S9134E-SDPG004
S9134E-SDPG005H
S9134E-SDPG007
S9134E-SDPG010
S9134E-SDPG016
S9134E-SDPG022
S9134E-SDPG028
S9134E-SDPG040
S9134E-SDPG049
S9134E-SDPG055
S9134E-SDPG070
S9134E-SDPG100
* S9134E-SDPG160
* S9134E-SDPG280
* S9134E-SDPG400
* S9134E-SDPG700
11-106
L
Gear
Ratio Max.
in.
3:1
4:1
9.16
5.91
5.5:1 Single Single
7:1 Stage Stage
10:1
16:1
22:1
28:1
10.29
7.04
40:1
Double Double
49:1
Stage Stage
55:1
70:1
100:1
160:1
11.51
8.26
280:1
Triple Triple
400:1
Stage Stage
700:1
Max. Rated
Max.
Max. Rated Inertia
Inertia
Cont.
Input
Torque**
Torque
Pinion
(6500 rpm
ozf in. sec. 2
lbf in.
lbf in.
ozf in. sec. 2
Input)
1285
1219
1113
935
552
1315
1333
1346
1364
1015
1232
1027
507
1424
1445
1458
1090
2008
1905
1740
1461
828
2055
2083
2103
2132
1587
1925
1605
761
2226
2258
2278
1703
2167
1675
1182
928
650
406
295
232
162
132
118
92
65
41
23
16
9
1.176 x 10-2
6.818 x 10-3
3.693 x 10-3
2.300 x 10-3
1.134 x 10-3
2.944 x 10-3
1.644 x 10-3
1.035 x 10-3
5.139 x 10-4
9.545 x 10-4
4.861 x 10-4
4.747 x 10-4
4.654 x 10-4
4.930 x 10-4
4.676 x 10-4
4.781 x 10-4
4.772 x 10-4
4.901 x 10-3
2.522 x 10-3
2.040 x 10-3
1.955 x 10-3
1.923 x 10-3
2.522 x 10-3
2.040 x 10-3
1.955 x 10-3
1.923 x 10-3
1.955 x 10-3
1.923 x 10-3
1.923 x 10-3
1.923 x 10-3
1.923 x 10-3
1.923 x 10-3
1.923 x 10-3
1.923 x 10-3


RIGHT ANGLE
R
Inch
2.875
2.873
.187
3.25
SQ.
4.38
2.74
(TYP)
1.50
(TYP)
5.14
.062 (TYP)
.56
.7500
.7495
.500
.220
(TYP)
(4 HOLES)
EQ. SP. ON A
3.875 B.C.
.094
#10-24 UNC-2B
X .500 DP.
(4 HOLES)
EQ. SP. ON A
3.875 B.C.
1.38
.15
#10-24 UNC-2B
X .500 DP.
(4 HOLES)
EQ. SP. ON A
3.875 B.C.
2.881
2.879
6
2.74
(TYP)
3.25
SQ.
7
8
9
10
11
12
13
14
15
11-107
16
I
R
T
1
2
3
4
5
6
7
8

RIGHT ANGLE
PRECISION SERIES
LOW BACKLASH DESIGN
Inch
MATERIAL:

1
Precision
Component
-40F to +255F
FEATURES:

SPECIFICATIONS:

Axial: 1400 lbf
Double Stage: 80%

Triple Stage: 75%



WEIGHT:
Triple Stage: 36 lb.
9
10
11
12
13
14
15
16
INCH COMPONENT
Catalog Number
S9142E-SDPG003
S9142E-SDPG004
S9142E-SDPG005H
S9142E-SDPG007
S9142E-SDPG010
S9142E-SDPG016
S9142E-SDPG022
S9142E-SDPG028
S9142E-SDPG040
S9142E-SDPG049
S9142E-SDPG055
S9142E-SDPG070
S9142E-SDPG100
* S9142E-SDPG160
* S9142E-SDPG280
* S9142E-SDPG400
* S9142E-SDPG700
L
Gear
Ratio Max.
in.
3:1
4:1 11.39
7.18
5.5:1 Single Single
7:1 Stage Stage
10:1
16:1
22:1
28:1
13.02
8.81
40:1
Double Double
49:1
Stage Stage
55:1
70:1
100:1
160:1
14.57
10.37
280:1
Triple Triple
400:1
Stage Stage
700:1
Max. Rated
Max.
Max. Rated Inertia
Inertia
Cont.
Input
Torque**
Torque
Pinion
(6500 rpm
ozf in. sec. 2
lbf in.
lbf in.
ozf in. sec. 2
Input)
2301
2195
2021
1711
1122
2379
2414
2438
2473
1867
2250
1890
1031
2587
2627
2651
2009
3597
3430
3159
2673
1684
3717
3772
3811
3865
2918
3516
2953
1547
4044
4105
4142
3140
2167
1625
1182
928
650
406
295
232
162
132
118
92
65
41
23
16
9

11-108
2.667 x 10-2
1.626 x 10-2
8.931 x 10-3
5.588 x 10-3
2.765 x 10-3
1.118 x 10-2
6.242 x 10-3
3.928 x 10-3
1.951 x 10-3
3.724 x 10-3
1.880 x 10-3
1.851 x 10-3
1.827 x 10-3
1.934 x 10-3
1.845 x 10-3
1.884 x 10-3
1.881 x 10-3
1.680 x 10-2
1.032 x 10-2
8.997 x 10-3
8.766 x 10-3
8.680 x 10-3
1.032 x 10-2
8.997 x 10-3
8.766 x 10-3
8.680 x 10-3
8.766 x 10-3
8.680 x 10-3
8.680 x 10-3
8.680 x 10-3
8.680 x 10-3
8.680 x 10-3
8.680 x 10-3
8.680 x 10-3

RIGHT ANGLE
R
Inch
2.187
2.185
4.20
SQ.
0
.250
3.50
(TYP)
5.51
2.00
(TYP)
.63
5.89
.062 (TYP)
.125
1.0000
.9995
.280
(4 HOLES)
EQ. SP. ON A
4.950 B.C.
1/4-20 UNC-2B
X .500 DP.
(4 HOLES)
EQ. SP. ON A
4.950 B.C.
.500
(TYP)
1.18
1
2
3
.50
.17
2.191
2.189
.280
(4 HOLES)
EQ. SP. ON A
4.950 B.C.
6
7
4.20
SQ.
3.50
(TYP)
8
9
10
11
12
13
14
15
11-109
16
I
R
T
1
2
3
4
5
6
7
8
9
DUAL-OUTPUT EG PLANETARY GEARHEADS SIZE 17

RIGHT ANGLE
ECONOMY SERIES
Inch
MATERIAL:

-40F to +255F
FEATURES:

SPECIFICATIONS:

Axial: 400 lbf
Double Stage: 80%

WEIGHT:
10
11
12
13
14
15
16
INCH COMPONENT
Catalog Number
L
Gear
Ratio Max.
in.
S9117E-SDEG003
S9117E-SDEG004
S9117E-SDEG005H
S9117E-SDEG007
S9117E-SDEG010
S9117E-SDEG016
S9117E-SDEG022
S9117E-SDEG028
S9117E-SDEG040
S9117E-SDEG049
S9117E-SDEG055
S9117E-SDEG070
S9117E-SDEG100
3:1
4:1
4.97
3.30
5.5:1 Single Single
7:1 Stage Stage
10:1
16:1
22:1
28:1
5.62
3.97
40:1
Double Double
49:1
Stage Stage
55:1
70:1
100:1
Max. Rated
Max.
Max. Rated Inertia
Inertia
Cont.
Input
Torque*
Torque
Pinion
(5000 rpm
ozf in. sec. 2
lbf in.
lbf in.
ozf in. sec. 2
Input)
125
119
107
89
56
127
128
129
131
95
117
96
52
174
165
149
124
84
176
178
179
181
132
162
134
77
1666
1250
909
714
500
312
227
178
125
102
91
71
50
11-110
1.669 x 10-4
1.053 x 10-4
5.870 x 10-5
3.692 x 10-5
1.833 x 10-5
1.045 x 10-4
5.830 x 10-5
3.667 x 10-5
1.821 x 10-5
3.479 x 10-5
1.755 x 10-5
1.729 x 10-5
1.708 x 10-5
2.163 x 10-4
1.352 x 10-4
1.174 x 10-4
1.143 x 10-4
1.132 x 10-4
1.352 x 10-4
1.174 x 10-4
1.143 x 10-4
1.132 x 10-4
1.143 x 10-4
1.132 x 10-4
1.132 x 10-4
1.132 x 10-4

RIGHT ANGLE
R
Inch
0
.866
.864
2.05
.094
.56
1.65
SQ.
2.72
.062 (TYP)
1.25
.125
(4 HOLES)
EQ. SP. ON
A 1.725 B.C.
.047
.3750
.3745
1.22
(TYP)
#4-40 UNC-2B
X .250 DP.
(4 HOLES)
EQ. SP. ON A
1.725 B.C.
.250
(TYP)
.82
2
3
L
M
.12
.125
(4 HOLES)
EQ. SP. ON
A 1.725 B.C.
.10
1.22
(TYP)
5
6
.868
.867
1.65
SQ.
8
9
10
11
12
13
14
15
11-111
16
I
R
T
1
2
3
4
5
6
7
8
9

RIGHT ANGLE
ECONOMY SERIES
Inch
MATERIAL:

-40F to +255F
FEATURES:

SPECIFICATIONS:

Axial: 600 lbf
Double Stage: 80%

WEIGHT:
10
INCH COMPONENT
11
12
13
14
15
16
Catalog Number
L
Gear
Ratio Max.
in.
S9123E-SDEG003
S9123E-SDEG004
S9123E-SDEG005H
S9123E-SDEG007
S9123E-SDEG010
S9123E-SDEG016
S9123E-SDEG022
S9123E-SDEG028
S9123E-SDEG040
S9123E-SDEG049
S9123E-SDEG055
S9123E-SDEG070
S9123E-SDEG100
3:1
4:1
6.78
4.51
5.5:1 Single Single
7:1 Stage Stage
10:1
16:1
22:1
28:1
7.68
5.41
40:1
Double Double
49:1
Stage Stage
55:1
70:1
100:1
Max. Rated
Max.
Max. Rated Inertia
Inertia
Cont.
Input
Torque*
Torque
Pinion
(5000 rpm
ozf in. sec. 2
lbf in.
lbf in.
ozf in. sec. 2
Input)
285
264
238
197
119
282
285
288
291
213
260
215
110
396
366
330
274
179
391
396
400
405
295
362
298
164
1666
1250
909
714
500
312
227
178
125
102
91
71
50
11-112
4.866 x 10-4
3.113 x 10-4
1.746 x 10-4
1.100 x 10-4
5.471 x 10-5
3.287 x 10-4
1.838 x 10-4
1.157 x 10-4
5.749 x 10-5
1.098 x 10-4
5.543 x 10-5
5.460 x 10-5
5.393 x 10-5
1.194 x 10-3
9.502 x 10-4
8.969 x 10-4
8.880 x 10-4
8.846 x 10-4
9.502 x 10-4
8.969 x 10-4
8.880 x 10-4
8.846 x 10-4
8.880 x 10-4
8.846 x 10-4
8.846 x 10-4
8.846 x 10-4

RIGHT ANGLE
R
Inch
0
1.500
1.498
2.95
.125
.5000
.4995
.063
1.86
(TYP)
.205
(4 HOLES)
EQ. SP. ON
A 2.625 B.C.
#10-24 UNC-2B
X .375 DP.
(4 HOLES)
EQ. SP. ON A
2.625 B.C.
.312
(TYP)
.99
2
3
L
M
.25
.12
.062 (TYP)
.56
2.25
SQ.
3.55
1.25
1.504
1.503
.205
(4 HOLES)
EQ. SP. ON
A 2.625 B.C.
1.86
(TYP)
6
7
2.25
SQ.
8
9
10
11
12
13
14
15
11-113
16
I
R
T
1
2
3
4
5
6
7
8
9
10

RIGHT ANGLE
ECONOMY SERIES
Inch
MATERIAL:

-40F to +255F
FEATURES:

SPECIFICATIONS:

Axial: 900 lbf
Double Stage: 80%

WEIGHT:
To mate with D50R10-66.. motor requires nonstandard pinion (1/2 in. bore)
INCH COMPONENT
11
12
13
14
15
16
Catalog Number
L
Gear
Ratio Max.
in.
S9134E-SDEG003
S9134E-SDEG004
S9134E-SDEG005H
S9134E-SDEG007
S9134E-SDEG010
S9134E-SDEG016
S9134E-SDEG022
S9134E-SDEG028
S9134E-SDEG040
S9134E-SDEG049
S9134E-SDEG055
S9134E-SDEG070
S9134E-SDEG100
3:1
4:1
9.53
6.27
5.5:1 Single Single
7:1 Stage Stage
10:1
16:1
22:1
28:1
10.80
7.54
40:1
Double Double
49:1
Stage Stage
55:1
70:1
100:1
Max. Rated
Max.
Max. Rated Inertia
Inertia
Cont.
Input
Torque*
Torque
Pinion
(5000 rpm
ozf in. sec. 2
lbf in.
lbf in.
ozf in. sec. 2
Input)
964
914
835
701
507
986
1000
1009
1023
762
924
770
507
1339
1270
1160
934
704
1370
1389
1402
1421
1058
1283
1070
761
1666
1250
909
714
500
312
227
178
125
102
91
71
50
11-114
4.672 x 10-3
2.833 x 10-3
1.585 x 10-3
9.983 x 10-4
4.961 x 10-4
2.824 x 10-3
1.580 x 10-3
9.952 x 10-4
4.946 x 10-4
9.417 x 10-4
4.759 x 10-4
4.684 x 10-4
4.623 x 10-4
4.901 x 10-3
2.522 x 10-3
2.040 x 10-3
1.955 x 10-3
1.923 x 10-3
2.522 x 10-3
2.040 x 10-3
1.955 x 10-3
1.923 x 10-3
1.955 x 10-3
1.923 x 10-3
1.923 x 10-3
1.923 x 10-3

RIGHT ANGLE
R
Inch
0
2.875
2.873
3.25
SQ.
.187
2.74
(TYP)
4.38
1.50
(TYP)
.56
5.14
.062 (TYP)
#10-24 UNC-2B
X .500 DP.
(4 HOLES)
EQ. SP. ON A
3.875 B.C.
.500
(TYP)
1.38
T
1
.094
.7500
.7495
.220
(4 HOLES)
EQ. SP. ON A
3.875 B.C.
2
3
4
.500
.15
5
2.881
2.879
.220 X .500 DP.

(4 HOLES)
EQ. SP. ON A
3.875 B.C.
6
7
3.25
SQ.
2.74
(TYP)
9
10
11
12
13
14
15
11-115
16
I
R
T
1
2
3
4
5
6
7
8
9

RIGHT ANGLE
ECONOMY SERIES
Inch
MATERIAL:

-40F to +255F
FEATURES:

SPECIFICATIONS:

Axial: 1400 lbf
Double Stage: 80%

WEIGHT:
10
11
12
13
14
15
16
INCH COMPONENT
Catalog Number
L
Gear
Ratio Max.
in.
S9142E-SDEG003
S9142E-SDEG004
S9142E-SDEG005H
S9142E-SDEG007
S9142E-SDEG010
S9142E-SDEG016
S9142E-SDEG022
S9142E-SDEG028
S9142E-SDEG040
S9142E-SDEG049
S9142E-SDEG055
S9142E-SDEG070
S9142E-SDEG100
3:1
4:1 11.85
7.64
5.5:1 Single Single
7:1 Stage Stage
10:1
16:1
22:1
28:1
13.45
9.24
40:1
Double Double
49:1
Stage Stage
55:1
70:1
100:1
Max. Rated
Max.
Max. Rated Inertia
Inertia
Cont.
Input
Torque*
Torque
Pinion
(5000 rpm
ozf in. sec. 2
lbf in.
lbf in.
ozf in. sec. 2
Input)
1726
1646
1516
1283
936
1784
1810
1829
1855
1400
1688
1417
1024
2398
2287
2106
1782
1300
2478
2515
2540
2577
1945
2344
1969
1423
1666
1250
909
714
500
312
227
178
125
102
91
71
50
11-116
1.641 x 10-2
1.049 x 10-2
5.878 x 10-3
3.704 x 10-3
1.841 x 10-3
1.101 x 10-2
6.156 x 10-3
3.875 x 10-3
1.925 x 10-3
3.706 x 10-3
1.866 x 10-3
1.843 x 10-3
1.823 x 10-3
1.680 x 10-2
1.032 x 10-2
8.997 x 10-3
8.766 x 10-3
8.680 x 10-3
1.032 x 10-2
8.997 x 10-3
8.766 x 10-3
8.680 x 10-3
8.766 x 10-3
8.680 x 10-3
8.680 x 10-3
8.680 x 10-3

RIGHT ANGLE
R
Inch
0
2.187
2.185
4.20
SQ.
.250
3.50
(TYP)
5.51
2.00
(TYP)
.63
5.89
.062 (TYP)
1/4-20 UNC-2B
X .500 DP.
(4 HOLES)
EQ. SP. ON A
4.950 B.C.
.500
(TYP)
1.18
T
1
.125
1.0000
.9995
.280
(4 HOLES)
EQ. SP. ON A
4.950 B.C.
2
3
4
.50
.17
5
2.191
2.189
.280
(4 HOLES)
EQ. SP. ON A
4.950 B.C.
6
7
4.20
SQ.
3.50
(TYP)
9
10
11
12
13
14
15
11-117
16
I
R
T
1
2
DUAL-OUTPUT SPUR GEARHEADS NEMA SIZE 23

RIGHT ANGLE
PLANETARY SYSTEM
LONG-LIFE DESIGN
Inch
MATERIAL:

4.92
.312
(TYP)
-40F to +255F
3
4
5
2.67
.19
.12
FEATURES:
Standard NEMA size.

clamp-on pinion.
Woodruff keys #404 and motor
3.55
#10-24 UNC-2B
X .375 DP.
(4 HOLES)
EQ. SP. ON A
2.625 B.C.
.062
(TYP)
7
8
9
10

1.25
(TYP)
Axial: 300 lbf
.56 (TYP)
.063 (TYP)
15 arc min.
.125
2.58 x 10-5 ozf in. sec.2
2.25 SQ.
1.504
1.503
.99
SPECIFICATIONS:
.205
(4 HOLES)
EQ. SP. ON
A 2.625 B.C.
1.86
(TYP)
PARTIAL MOTOR
INPUT VIEW
.5000
.4995 (TYP)
.205
(4 HOLES)
EQ. SP. ON
A 2.625 B.C.
1.500
1.498
1.86
(TYP)
2.25 SQ.
WEIGHT:
GEARHEAD
4 lb.
OUTPUT VIEW
2.95
11
INCH COMPONENT
12
13
14
15
16
Catalog Number
Gear
Ratio
S9123E-SDSG003
S9123E-SDSG005
S9123E-SDSG010
S9123E-SDSG015
S9123E-SDSG020
S9123E-SDSG030
S9123E-SDSG050
S9123E-SDSG100
3:1
5:1
10:1
15:1
20:1
30:1
50:1
100:1
Maximum Rated
Output rpm
(4000 rpm input)
1333
800
400
267
200
133
80
40
11-118
Rotation *
Direction
S
S
S
R
R
R
R
S

RIGHT ANGLE
PLANETARY SYSTEM
LONG-LIFE DESIGN
R
Inch
MATERIAL:

6.74
-40F to +255F
.312
(TYP)
FEATURES:
Standard NEMA size.

clamp-on pinion.
5.14
3.49
# 10-24 UNC-2B
X .500 DP.
(4 HOLES)
EQ. SP. ON A
3.875 B.C.
1.38
SPECIFICATIONS:
1.50
(TYP)
Axial: 500 lbf
.56 (TYP)
.094 (TYP)
available on special order. .187
15 arc min.
2.09 x 10-4 ozf in. sec.2
.062
(TYP)
.38
.15
2.881
2.879
.220
(4 HOLES)
EQ. SP. ON A
3.875 B.C.
.7500
.7495 (TYP)
2.74
(TYP)
2.875
2.873
4.38
GEARHEAD
OUTPUT VIEW
9 lb.
6
7
.220 (4 HOLES)
EQ. SP. ON A
3.875 B.C.
2.74
(TYP)
3.25 SQ.
PARTIAL MOTOR
INPUT VIEW
3.25 SQ.
WEIGHT:
10

To mate with D50R10-06... motors requires nonstandard pinions (1/2 inch bore).
11
INCH COMPONENT
Catalog Number
Gear
Ratio
S9134E-SDSG003
S9134E-SDSG005
S9134E-SDSG010
S9134E-SDSG015
S9134E-SDSG020
S9134E-SDSG030
S9134E-SDSG050
S9134E-SDSG100
3:1
5:1
10:1
15:1
20:1
30:1
50:1
100:1
Maximum Rated
Output rpm
(4000 rpm input)
1333
800
400
267
200
133
80
40
Rotation *
Direction
S
S
S
S
R
R
S
S
11-119
12
13
14
15
16
I
R
T
1
2

RIGHT ANGLE
PLANETARY SYSTEM
LONG-LIFE DESIGN
Inch
MATERIAL:

-40F to +255F
3
4
5
8.21
4.01
FEATURES:

clamp-on pinion.
.50
.18
1/4-20 UNC-2B
X .500 DP.
(4 HOLES) EQ.
.062 SP. ON A
(TYP) 4.950 B.C.
7
8
9

Axial: 700 lbf
2.00
(TYP) .63
(TYP)
15 arc min.
.250
6.69 x 10-4 ozf in. sec.2
WEIGHT:
24 lb.
10
11
12
13
14
15
16
2.186
2.184
5.89
SPECIFICATIONS:

.500
(TYP)
1.0000
.9995
.125 (TYP)
(TYP)
1.18
.280
(4 HOLES)
EQ. SP. ON
A 4.950 B.C.
3.50
(TYP)
4.20 SQ.
PARTIAL MOTOR
INPUT VIEW
.280
(4 HOLES)
EQ. SP. ON
A 4.950 B.C.
2.187
2.185
3.50
(TYP)
4.20 SQ.
GEARHEAD
OUTPUT VIEW
5.51
INCH COMPONENT
Catalog Number
Gear
Ratio
S9142E-SDSG003
S9142E-SDSG005
S9142E-SDSG010
S9142E-SDSG015
S9142E-SDSG020
S9142E-SDSG030
S9142E-SDSG050
S9142E-SDSG100
3:1
5:1
10:1
15:1
20:1
30:1
50:1
100:1
Maximum Rated
Output rpm
(4000 rpm input)
1333
800
400
267
200
133
80
40
11-120
Rotation *
Direction
S
S
S
R
R
S
R
S
INCH OR
METRIC
R
Inch
T
1
2
SPUR GEARS BEVEL GEARS HELICAL GEARS INTERNAL

3
GEARS WORM GEARS SPLINES
At SDP/SI, we offer complete design and manufacturing

services at our fine pitch gear cutting facility, one of the
largest in the U.S. with over 130 gear cutting machines.
4
5
PRECISION COMMERCIAL 6
7
8
9
CALL
516-328-3300
to discuss your
requirements
E-Mail
us at
sdp-sisupport@sdp-si.com
11-121
10
11
12
13
14
15
16
12 - RIGHT ANGLE DRIVES

R
T
Catalog
Series
1
2
Ratios
0 Pages
Right Angle Bevel Gearboxes

Stainless Steel Shafts
Precision Sealed Ball Bearings
1:1
12-3 thru 12-6
Right Angle Bevel Gear Drives

Steel Coniflex Gears
Steel Ball Bearings
Permanently Lubricated with
Lithium-Based Grease
1:1
12-7
1:1, 2:1, 3:1
12-8
1:1 & 2:1
12-9
3.5:1 thru 60:1
12-10
5:1 thru 100:1
12-11
5:1, 10:1 and 20:1
12-12
1:1, 2:1 and 3:1
12-12
8:1 thru 80:1
12-13
S9914F-G...
3
A 2Z20-..101012
4
5
Inch
Material
A 2Z21-...

Case-Hardened Steel Gears
Bearings (Input): Precision Ball
Bearings (Output): Sintered Bronze

Molded Nylon Gears
Sintered Bronze Bearings
6
A 2Z21-...
7
8
A 2B 7-(S,H)...
9
10
A 2B 8-(S,H)...
Worm Gear Speed Reducers

Commercial Quality
Right-Hand Ground Steel Worm Gear
Ground and Polished Steel Shafts
Prelubricated with Grease
Speed Reducers
Commercial Quality
Right-Hand Ground Steel Worm Gear
Bearings (Input): Precision Ball
Prelubricated with Grease
Right Angle Worm Gear Drives
Steel Worms and Bronze Worm Gears
11
A 2Z 4-...
12
13
S9914Y-G1566-..
14
15
16
A 2Z17-E0...
12-0
12-2

Brass Bevel Gears
Precision Quality
Right-Hand Hardened Carbon Steel
Worms and Phosphor Bronze Worm
Wheels
Bearings (Input): Ball

R
Catalog
Series
A 2Z18-E...
A 2Z19-E...
A 2Z22-...
A 2Z23-...08
A 2Z 1-...
A 2Z 2-...
A 2Z 3-2...
A 2Z11-...
A 2Z11-...
Inch
0 Pages
Material
Ratios

Precision Quality
Hardened Carbon Steel Worms and
Phosphor Bronze Worm Wheels
7.5:1 thru 100:1

High Torque & Precision Quality
Hardened Carbon Steel Worms
and Phosphor Bronze Worm Wheels
6:1 thru 100:1
12-15
Right Angle Helical Gear

Speed Reducers
Light-Duty
Base-Mounted
Hardened Steel Helical Gears
1:1 thru 25:1
12-16
Right Angle Helical Gear

Speed Reducers
Light-Duty
Panel-Mounted
1:1 thru 25:1
12-14
T
1
2
3
4
5
12-17
6
7
Right Angle and

Dual Helical Gear Drives
Light-Duty
Steel Gears
Oilite Bearings
1:1
Right Angle and

Dual Helical Gear Drives
Heavy-Duty
Steel Helical Gears
Steel Ball Bearings
1:1
Right Angle Helical Gear Drives

Light-Duty
Panel-Mounted
Steel Helical Gears
Oilite Bearings
1:1
12-20
Miniature Right Angle

Helical Gear Drives
Base-Mounted
Nonmetallic Bearings
1:1 and 2:1
12-21
Miniature Right Angle

Helical Gear Drives
Panel-Mounted
Nonmetallic Bearings
1:1 and 2:1
12-18
8
12-19
9
10
11
12
13
12-22
14
15
12-1
16

R
T
Catalog
Series
1
2
Inch
Material
Ratios
0 Pages

Mini-Shaft Drive
Heavy-Duty Sealed Ball Bearings
Heat-Treated Steel Gears
1:1
12-23

Hollow-Shaft Drive
2:1
12-24

Hollow-Shaft Drive
1:1 and 1.5:1
12-25

Key Drive
1:1
12-26
12-27
S991MY-...
3
S991HY-C...
4
5
S991HY-(A,B)...
6
S991SY-...
7
8
Foot Mounts for Key Drive

6061 Aluminum Alloy
Black Anodized Finish
S9957Y-UFM
9
10
11
12
13
14
15
16
12-2
RIGHT ANGLE BEVEL GEARBOXES

1:1 RATIO
MATERIAL:
Housing - Aluminum, Green Anodized

Bevel Shafts - 303 Stainless Steel
Bearings - Input - Precision Sealed Ball Bearings
Output - Precision Sealed Ball Bearings
Inch
LUBRICATION:
T
1
Greased for life
-5F to 175F
SPECIFICATIONS:
Maximum Input Speed:

2000 rpm
Backlash: 1
Low Backlash: .5 available
.13
WEIGHT:
.13
.07 lb.
INCH COMPONENT
.19
Catalog Number
.19
S9914F-G16
* S9914F-G16R
S9914F-G16H
* S9914F-G16L
(2) 6-32 UNC-2B

THREADED THRU HOLES
.38
(TYP)
* Low Backlash: .5
9/16
.28 (TYP)
.1250 +.0000
-.0005 (TYP)
.32 (TYP)
OPERATING LIFE: Hours

Torque
ozf in.
50
100
Catalog Number: S9914F-G16 and S9914F-G16R
20000
20000
2
20000
20000
2.25
7500
15000
2.5
4000
2.75
8100
2200
3
4500
Catalog Number: S9914F-G16H and S9914F-G16L
20000
20000
4
20000
20000
4.5
9500
20000
5
4700
5.5
9500
6
5250
2500
3100
1500
6.5
1900
940
7
.16 (TYP)
rpm
200
500
1000
2000
10
20000
17000
3650
1950
1100
20000
6000
1400
740
420
20000
2600
660
350
200
18000
1100
310
160
90
11
20000
20000
4500
2300
1250
750
450
20000
9100
1650
880
480
280
170
20000
4000
790
420
230
130
80
11700
1700
370
190
100
60
40
12
NEW
13
14
15
12-3
16

1:1 RATIO
R
T
1
MATERIAL:

Inch
LUBRICATION:
Greased for life
-5F to 175F
1-3/8
.14
SPECIFICATIONS:

2000 rpm for S9914F-G19 & S9914F-G19H
3000 rpm for S9914F-G19S & S9914F-G19L
Backlash: 1
WEIGHT:
.14
1-3/8
.31
.16 lb.
INCH COMPONENT
.31
Catalog Number
6
7
(2) 8-32 UNC

THREADED THRU HOLES
.50
(TYP)
S9914F-G19
S9914F-G19H
S9914F-G19S
* S9914F-G19L
3/4
* Low Backlash: .5
.38 (TYP)
+.0000
.35 (TYP)
.25
(TYP)
.1875 -.0005 (TYP)
9
10
11
12
NEW
13
14
15
16
Torque
ozf in.
Catalog Number:
5
6
7
8
9
10
Catalog Number:
17
18
19
20
21
22
23
Catalog Number:
40
45
50
55
60
65
70
12-4
rpm
50
100
S9914F-G19
20000
20000
20000
20000
11000
20000
3900
8000
3800
1800
1800
900
S9914F-G19H
20000
20000
20000
20000
20000
20000
20000
20000
10000
20000
7000
14000
5000
10500
S9914F-G19S and S9914F-G19L
20000
20000
20000
20000
20000
20000
20000
15500
6000
12000
3500
7100
4400
2180
200
500
1000
2000
3000
20000
20000
5000
1900
850
450
20000
20000
2100
750
320
170
20000
10000
1000
350
150
80
20000
4200
385
160
75
35
20000
20000
20000
12000
5500
3300
2500
20000
20000
10000
4500
1900
1300
950
20000
11000
4500
2000
900
620
450
10000
4500
1900
800
400
280
220
20000
20000
20000
6500
2800
1700
1050
20000
20000
12000
2500
1100
650
400
20000
20000
5000
1100
500
310
180
20000
12000
2200
450
230
145
87
20000
7000
1250
270
150
90
55

1:1 RATIO
MATERIAL:

Inch
LUBRICATION:
T
1
Greased for life
-5F to 175F
1-3/4
.23
SPECIFICATIONS:

2000 rpm for S9914F-G24 & S9914F-G24H
3000 rpm for S9914F-G24S & S9914F-G24L
Backlash: 1
.23
1-3/4
WEIGHT:
.46 lb.
.27
INCH COMPONENT
.27
Catalog Number
(2) 10-32 UNC

THREADED THRU HOLES
S9914F-G24
S9914F-G24H
S9914F-G24S
* S9914F-G24L
.75
(TYP)
* Low Backlash: .5
.50 (TYP)
+.0000
.2500 -.0005 (TYP)

.53 (TYP)

Torque
lbf in.
Catalog Number:
2
2.5
3
3.5
4
10
Catalog Number:
6
7
8
9
10
11
12
Catalog Number:
15
16
17
18
19
.25
(TYP)
rpm
50
100
S9914F-G24
20000
20000
20000
20000
9400
20000
3150
6400
1300
2700
900
1800
S9914F-G24H
20000
20000
20000
20000
20000
20000
10000
20000
4500
9100
4900
2400
2700
1330
20000
20000
20000
20000
20000
20000
20000
20000
20000
20000
200
500
1000
2000
3000
20000
20000
4300
1500
630
450
20000
20000
1550
570
230
170
20000
12200
740
265
110
80
20000
4800
330
120
50
35
20000
20000
20000
4600
2150
1200
650
20000
20000
10500
1650
810
430
240
20000
20000
4500
750
480
200
110
20000
16000
1800
340
175
90
50
20000
20000
20000
20000
10000
20000
20000
20000
8200
3400
20000
20000
8600
3400
1400
20000
9000
3300
1320
550
14300
5000
1860
730
305
8
9
10
11
12
NEW
13
14
15
12-5
16

1:1 RATIO
R
T
1
MATERIAL:

Inch
LUBRICATION:
Greased for life
2
3
4
5
-5F to 175F
.38
SPECIFICATIONS:

2000 rpm for S9914F-G31 & S9914F-G31H
3000 rpm for S9914F-G31S & S9914F-G31L
Backlash: 1
2-1/2
.38
2-1/2
WEIGHT:
.50
1.35 lb.
INCH COMPONENT
.50
Catalog Number
6
7
S9914F-G31
S9914F-G31H
S9914F-G31S
* S9914F-G31L
1.00
(TYP)
1-1/2
* Low Backlash: .5
.75 (TYP)
+.0000
.3750 -.0005 (TYP)
.75 (TYP)
9
10
11
12
NEW
13
14
15
16
Torque
lbf in.
Catalog Number:
6
6.5
7
7.5
8
Catalog Number:
13
14
15
16
17
18
19
20
Catalog Number:
25
26
27
28
29
30
31
32
12-6
(2) 1/4-20 UNC

THREADED THRU HOLES
.25 (TYP)
rpm
50
100
S9914F-G31
20000
20000
20000
20000
20000
20000
4300
9600
800
1750
S9914F-G31H
20000
20000
20000
20000
20000
20000
20000
20000
12500
20000
6750
13800
4700
9600
3300
6900
20000
20000
20000
20000
20000
20000
20000
20000
20000
20000
20000
20000
20000
20000
20000
20000
200
500
1000
2000
3000
20000
20000
11400
1880
350
20000
20000
3500
570
105
20000
9100
1300
210
38
20000
3000
435
70
15
20000
20000
20000
15500
5800
3100
2280
1620
20000
20000
15000
5300
1950
1200
850
600
20000
19000
6200
2200
825
560
395
280
20000
7500
2450
850
375
250
180
125
20000
20000
20000
20000
20000
20000
20000
15000
20000
20000
20000
20000
20000
14000
8200
4900
20000
20000
20000
17600
10000
5800
3300
2000
20000
20000
12000
6800
3800
2200
1250
760
20000
12000
6700
3700
2100
1200
700
340
RIGHT ANGLE BEVEL GEAR DRIVES

1:1 RATIO
INPUT SPEEDS UP TO 3000 rpm
METAL GEARS
BALL BEARINGS
R
Inch
MATERIAL:
Housing - Fiberglass Reinforced Plastic

Gears - Steel, Hardened - Coniflex Type
Shafts - High-Tensile Steel
Bearings - Steel Ball
Lubrication - Permanently Lubricated with Lithium-Based Grease
T
1
SPECIFICATIONS:
Rated at 1/3 hp at 1800 rpm

Maximum Input Speed: 3000 rpm
3
4
1-21/32
#8-32 BOLTS
.375 & HEX NUTS
THRU (TYP)
4 PLACES
3-21/32
3-1/16
1-3/32
1-23/32
.209
3 THRU
HOLES
3/16 (TYP)
2-3/16
1-7/32
1.32
1/32 (TYP)
1.32
7/8
1.19
1/2 (TYP)
1-1/8
9/16
9/16
1-13/32
1-13/32
3-15/16
.88
1-1/4
.166
12 HOLES THRU
FLANGES ONLY
3-3/8
U Series
9
10
11
12
L Series
R Series
13
INCH COMPONENT
Catalog Number
A 2Z20-UC101012
A 2Z20-LC101012
A 2Z20-RC101012
Shaft
Dia.
+.000
-.001
.375
.375
.375
Gear
Ratio
1:1
1:1
1:1
Approx.
Weight
14
12
12
12
15
oz.
12-7
16
I
R
T
1
2

MULTIPLE RATIOS
RATED SPEEDS UP TO 1800 rpm
METAL GEARS
BALL AND BRONZE BEARINGS
Inch
MATERIAL:
Housing - PTMT Polyester 30% Glass Filled

Shafts - Precision Ground 303 Stainless Steel
Bearings - Input Shaft - Precision Grade Steel Ball
Output Shaft - Sintered Bronze
Gears - Case-Hardened Steel
SPECIFICATION:
Backlash: 3
3
4
5
6
5/32
(TYP) 3/4
.154
4 HOLES
(TYP)
INPUT
INPUT
"L" Series
"R" Series
.147 THRU
3 HOLES
1-5/8
OUTPUT
.81
7
8
INPUT
1.31
.656
27/32
3/4 SQ.
(TYP)
1-3/16
1-1/8 SQ.
(TYP)
1-1/8
2
3-1/2
3/4
"U" Series
9
INCH COMPONENT
10
11
12
13
14
15
16
Catalog Number
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
2Z21-UC101006
2Z21-LC101006
2Z21-RC101006
2Z21-UC101008
2Z21-LC101008
2Z21-RC101008
2Z21-UC201006
2Z21-LC201006
2Z21-RC201006
2Z21-UC201008
2Z21-LC201008
2Z21-RC201008
2Z21-UC301006
2Z21-LC301006
2Z21-RC301006
2Z21-UC301008
2Z21-LC301008
2Z21-RC301008
12-8
Shaft
Dia.
+.0000
-.0002
.1872
.1872
.1872
.2497
.2497
.2497
.1872
.1872
.1872
.2497
.2497
.2497
.1872
.1872
.1872
.2497
.2497
.2497
Gear
Ratio
1:1
1:1
1:1
1:1
1:1
1:1
2:1
2:1
2:1
2:1
2:1
2:1
3:1
3:1
3:1
3:1
3:1
3:1
1800 rpm Input

Max.
Output Torque
lbf in.
3
3
3
3
3
3
4-1/2
4-1/2
4-1/2
4-1/2
4-1/2
4-1/2
4
4
4
4
4
4
Max.
Output hp
Approx.
Weight
oz.
.08
.08
.08
.08
.08
.08
.06
.06
.06
.06
.06
.06
.03
.03
.03
.03
.03
.03
3-1/2
3-1/2
3-1/2
4
4
4
3-1/2
3-1/2
3-1/2
4
4
4
3-1/2
3-1/2
3-1/2
4
4
4

1:1 OR 2:1 RATIOS
MOLDED GEARS
SINTERED BRONZE BEARINGS
R
Inch
MATERIAL:
Housing - PTMT Polyester 30% Glass Filled

Shafts - Precision Ground 303 Stainless Steel
Gears - Molded Nylon
T
1
SPECIFICATION:
Backlash: 5
3
4
5/32
(TYP) 3/4
.154
4 HOLES
(TYP)
INPUT
.147 THRU
3 HOLES
INPUT
INPUT
1-5/8
OUTPUT
.81
1-3/16
1.31
.656
27/32
3/4 SQ.
(TYP)
1-1/8 SQ.
(TYP)
1-1/8
2
3-1/2
3/4
"L" Series
"R" Series
"U" Series
8
9
INCH COMPONENT
Catalog Number
A
A
A
A
A
A
2Z21-UM101006
2Z21-LM101006
2Z21-RM101006
2Z21-UM201006
2Z21-LM201006
2Z21-RM201006
Shaft
Dia.
+.0000
-.0002
.1872
.1872
.1872
.1872
.1872
.1872
Gear
Ratio
1:1
1:1
1:1
2:1
2:1
2:1
1800 rpm Input

Max.
Output Torque
lbf in.
1
1
1
2-1/2
2-1/2
2-1/2
Max.
Output hp
Approx.
Weight
oz.
10
.03
.03
.03
.03
.03
.03
3-1/2
3-1/2
3-1/2
3-1/2
3-1/2
3-1/2
11
12
13
14
15
12-9
16
I
R
T
1
2
3
4
WORM GEAR SPEED REDUCERS

COMMERCIAL QUALITY
SINTERED BEARINGS
MULTIPLE RATIOS
BRONZE DRIVEN GEAR
Inch
MATERIAL:
Case - Compression-Molded Glass-fill Polyester

Gears - Precision-Hobbed Bronze Driven Gear
Ground Steel Worm - Right-Hand
Bearings - Input and Output Shafts - Sintered Bronze
Shafts - Ground & Polished Steel
Lubrication - Gears are Prelubricated with Grease
Seals - Input Shafts are sealed to retain lubrication
and keep out dirt.
DIMENSIONS:
3-3/8 High x 3-7/8 Wide x 3 Deep
APPROX. WEIGHT:
28 oz.
2.97
2.63
2.13
.25
.44 FLAT
Solid
Shaft
.63
.03 1.25
.312
.310
.38
.44 FLAT
11
16
3.38
.75
2.75
.38
1.13
4 HOLES FOR
3/16 SCREWS
#29 (.136)
HOLE-THRU .44
I.D.
.626 OUTPUT
.630 SHAFT
.63
.38
2.25
2.66
2.16
1.41
.70
#10-24
SCREWS
2.75
3.25
.03 1.25
.312
.310
1.375
.81
.25
.38
2.75
3.38
3.88
12
15
1.375
3.25
.19
Hollow
Shaft
14
2.75
3.38
3.88
.875
10
.56
FLAT
.63
2.63
2.13
.03
2.16
1.41
.38
.81
.25
.81
#10-24
SCREWS
O.D.
.500 OUTPUT
.498
SHAFT
.875
13
1.13
.63
3.38
.38
2.25
4 HOLES FOR
3/16 SCREWS
INCH COMPONENT
Catalog Number
Solid Shaft
A
A
A
A
A
A
A
A
2B
2B
2B
2B
2B
2B
2B
2B
7-S035
7-S100
7-S150
7-S200
7-S300
7-S400
7-S480
7-S600
12-10
1800 rpm Input
Hollow Shaft
A
A
A
A
A
A
A
A
2B
2B
2B
2B
2B
2B
2B
2B
7-H035
7-H100
7-H150
7-H200
7-H300
7-H400
7-H480
7-H600
Ratio
3.5:1
10:1
15:1
20:1
30:1
40:1
48:1
60:1
Input
hp
.84
.33
.27
.225
.15
.10
.09
.075
Output
hp
.82
.30
.24
.18
.12
.08
.06
.035
Output
rpm
514
180
120
90
60
45
38
30
Output Torque
lbf in.
102
102
102
105
120
112
96
75
SPEED REDUCERS
SIZE 44
COMMERCIAL QUALITY
BALL AND BRONZE BEARINGS
R
Inch
MATERIAL:
Case - Compression-Molded Glass-fill Polyester

Gears - Precision-Hobbed Bronze Driven Gear
Ground Steel Worm - Right-Hand
Bearings - Input Shaft - Steel Shielded Ball
Output Shaft - Sintered Bronze
Input & Output Shafts - Anti-Friction Thrust
Shafts - Ground & Polished Steel
Lubrication - Gears are Prelubricated with Grease.
Seals - Input and Output shafts are supported by sintered
bronze bearings sealed to retain lubrication and
keep out dirt.
4.38
3.75
Hollow Shafts: 5-1/2 High

x 7-3/8 Wide x 5-1/8 Deep
Solid Shafts: 5-1/2 Deep
1.250
1.247
APPROX. WEIGHT:
Hollow Shaft: 6 lb., 5 oz.

Sold Shaft: 6 lb., 10 oz.
Solid
Shaft
1.50
.75
.500
.499
2
1.38
.25
SCREWS
O.D.
.75
.625 OUTPUT
.624
SHAFT
FLAT
BREATHER
PLUG .06
2.00
5.13
4.13
2.50
.81
4
5.50
1.31
4.75
3.75
4.75
5.38
7.38
.75
1.31
1.69
3.38
4 HOLES FOR
.25 SCREWS
5.13
.94
.25
SCREWS
.81
4.13
2.50
I.D.
.751 OUTPUT
.754
SHAFT
2.25
1.250
1.247
4.75
BREATHER
PLUG
2.00
1.50
.75
5
6
.44
4.38
3.75
T
1
2.25
DIMENSIONS:
.06
5.50
10
Hollow
Shaft
.500
.499
.44
1.69
1.31
3.75
4.75
5.38
7.38
11
3.38
4 HOLES FOR
.25 SCREWS
12
INCH COMPONENT
Catalog Number
Solid Shaft
A
A
A
A
A
A
A
2B
2B
2B
2B
2B
2B
2B
8-S0050G
8-S0090G
8-S0180G
8-S0250G
8-S0360G
8-S0500G
8-S1000G
1800 rpm Input
Hollow Shaft
Ratio
A
A
A
A
A
A
A
5:1
9:1
18:1
25:1
36:1
50:1
100:1
2B
2B
2B
2B
2B
2B
2B
8-H0050G
8-H0090G
8-H0180G
8-H0250G
8-H0360G
8-H0500G
8-H1000G
Input
hp
.94
.68
.40
.30
.23
.15
.12
Output
hp
.80
.55
.30
.22
.15
.10
.06
Output
rpm
360
200
100
72
50
36
18
Output Torque*
lbf in.
140
175
190
190
190
190
195
13
14
15
* At lower speeds the torque ratings shown may be increased up to 50%.
12-11
16
RIGHT ANGLE WORM & BEVEL GEAR DRIVES

RIGHT ANGLE WORM GEAR DRIVES

MULTIPLE RATIOS
Inch
MATERIAL:
Housing - Aluminum Alloy,

Chromate Conversion Finish
Shafts - Stainless Steel
Worm Gear - Steel
Worm - Steel
SPECIFICATIONS:
1
1-1/16
1/2
3/4
3/16
OUTPUT
1/4
INPUT
Output Torque: 200 ozf in.

Maximum Backlash: 5
1/2
3/4
INCH COMPONENT
1/16
3/4
1-1/2
#6-32 TAP
4 HOLES
11/32 3/4
3/4
1-17/32
3/8
Catalog Number
Gear
Ratio
A 2Z 4-050
A 2Z 4-100
A 2Z 4-200
5:1
10:1
20:1
7
8

MULTIPLE RATIOS
MATERIAL:
SPECIFICATIONS:
Output Torque: 200 ozf in.

Maximum Backlash: 5
1-1/16
17/32
3/4
1/2
10
3/16
OUTPUT
3/4
1/4
INPUT
11
1-1/2
#6-32 TAP
4 HOLES
1/4
3/4
INCH COMPONENT
5
6
Housing - Aluminum Alloy,

Chromate Conversion Finish
Shafts - Stainless Steel
Bevel Gears - Brass
12
3/4
1/2
7/8
1-17/32
13
Catalog Number
Gear
Ratio
14
S9914Y-G1566-01
S9914Y-G1566-02
S9914Y-G1566-03
1:1
2:1
3:1
15
12-12
REV: 04.10.12 mh
16

PRECISION QUALITY
STYLE "E"
MULTIPLE RATIOS
LOW TORQUE
R
Inch
MATERIAL:
Housing - Aluminum Alloy, Black Anodized

Shafts - Input - (one piece with worm) Carbon Steel
Output - Mild Steel
Gears - Right-Hand Worm - Hardened Carbon Steel
with Polished Threads
Worm Wheel - Phosphor Bronze
Bearings - Input - Ball
Output - Sintered Bronze
T
1
2
LUBRICATION:
Packed with grease at assembly having

temperature range of -25F to +295F.
SPECIFICATIONS:

Backlash at Output: 0 30'
Torque:
Max. starting torque at input shaft: .07 ozf in.
Max. cont. output torque @ 1800 rpm: 4.5 lbf in.
WEIGHT:
6
3/4
.1878
.1873
INPUT
2.75 oz.
.250
3/4
.750
OUTPUT
#4-40 X 3/16
TAPPED HOLES
EACH END
.437
.1250
.1245
1.250
.625
.157
.750
1.156
1.531
9
10
Style E
11
INCH COMPONENT
Catalog Number
A
A
A
A
A
A
A
A
A
A
2Z17-E0080
2Z17-E0100
2Z17-E0125
2Z17-E0166
2Z17-E0200
2Z17-E0250
2Z17-E0300
2Z17-E0500
2Z17-E0600
2Z17-E0800
Ratio
to
1
12
8
10
12.5
16.67
20
25
30
50
60
80
13
NOTE:
Also available in other styles where special shaft diameters or
extensions are required. These speed reducers are available with
anti-backlash gears. Input speed, however, is limited to 3000 rpm with
a maximum continuous output torque of 1.3 ozf in. Maximum starting
torque at input shaft is .85 ozf in.
12-13
14
15
16
T
1
2
3
4
5
6
PRECISION QUALITY
STYLE "E"
MULTIPLE RATIOS
8
9
10
11
12
13
14
MATERIAL:

Shafts - Input - Carbon Steel
Output - Mild Steel
Gears - Worm - Hardened Carbon Steel with
Polished Right-Hand Threads
LUBRICATION:
Packed with grease at assembly having a
SPECIFICATIONS:

7/8
.2503
Torque:
.2497
Max. starting torque at input shaft: .14 ozf in.
Max. cont. output torque @ 1800 rpm: 13 lbf in.
9/16
WEIGHT:
#6-32 X 3/16
TAPPED HOLES
EACH END
.625
INCH COMPONENT
Catalog Number
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
2Z18-E0075
2Z18-E0080
2Z18-E0100
2Z18-E0120
2Z18-E0150
2Z18-E0160
2Z18-E0166
2Z18-E0170
2Z18-E0200
2Z18-E0215
2Z18-E0240
2Z18-E0250
2Z18-E0300
2Z18-E0320
2Z18-E0360
2Z18-E0400
2Z18-E0420
2Z18-E0450
2Z18-E0480
2Z18-E0500
2Z18-E0600
2Z18-E0900
2Z18-E1000
12-14
.1875
.1870
.375
1.000 1.750
OUTPUT
7.0 oz.
15
16
Inch
Other ratios available on special order.
INPUT
.875
INPUT
1.625
2.062
.187
1.000
Style "E"
Ratio
to 1
7.5
8
10
12
15
16
16.67
17
20
21.5
24
25
30
32
36
40
42
45
48
50
60
90
100
NOTE:
anti-backlash gears. Input speed however is limited to 3000 rpm
with a maximum continuous output torque of 1.5 lbf in. Maximum
starting torque at input shaft is 3.19 ozf in.

PRECISION QUALITY
STYLE "E"
MULTIPLE RATIOS
HIGH TORQUE
R
Inch
MATERIAL:

Shafts - Input - Carbon Steel
Output - Mild Steel
Gears - Worm - Hardened Carbon Steel with
Polished Right-Hand Threads
1
2
3
LUBRICATION:
SPECIFICATIONS:

.3753
Torque:
.3750
Max. starting torque at input shaft: 1.12 ozf in.
Max. cont. output torque @ 1800 rpm: 39 lbf in.
#10-32 X 1/4
TAPPED HOLES
EACH END
1.000
INCH COMPONENT
Catalog Number
2Z19-E0060
2Z19-E0075
2Z19-E0083
2Z19-E0100
2Z19-E0125
2Z19-E0150
2Z19-E0160
2Z19-E0200
2Z19-E0240
2Z19-E0250
2Z19-E0300
2Z19-E0360
2Z19-E0400
2Z19-E0450
2Z19-E0480
2Z19-E0500
2Z19-E0600
2Z19-E0700
2Z19-E0900
2Z19-E1000
Ratio
to 1
6
7.5
8.33
10
12.5
15
16
20
24
25
30
36
40
45
48
50
60
70
90
100
1.750 2.500
INPUT
21 oz.
.3128
.3123
.375
1
OUTPUT
WEIGHT:
A
A
A
A
A
A
A
A
*A
A
A
A
A
A
*A
A
A
*A
A
A
INPUT
Packed with grease at assembly having a

1.250
.187
1.375
2.375
3.062
Style "E"
6
7
8
9
10
11
NOTE:
anti-backlash gears. Input speed, however, is limited to 3000 rpm
with a maximum continuous output torque of 2.6 lbf in. Maximum
starting torque at input shaft is 15.8 ozf in.
12
13
14
15
12-15
16
RIGHT ANGLE HELICAL GEAR SPEED REDUCERS

MULTIPLE RATIOS
BASE-MOUNTED
LIGHT-DUTY
R
Inch
MATERIAL:
Housing and Base - Aluminum Alloy, Black Anodized

Gears - Hardened Steel, Helical
Shafts - Steel, Plated
T
1
SPECIFICATIONS:
Backlash: 3 Nominal

8 Including End Play
APPROX. WEIGHT:
4 oz.
Maximum Output Power @ 1800 rpm Input
For 1:1 ratio, any shaft may be used as input.
Duty
From 1:1 to
5:1 Ratio
From 10:1 to
25:1 Ratio
Intermittent
Continuous
1/8 hp (Max.)
1/15 hp (Max.)
1/12 hp (Max.)
1/20 hp (Max.)
29/32
INPUT
SHAFT
1/2
7/16
3/4
7/32
OUTPUT
SHAFT 1-1/8
3/32
(TYP) (TYP)
+.000
.250 -.002
2RR Series
1-1/2
(TYP)
2-7/16
11/32
1/2
* GREASE
FITTING
3/16
1-1/16
1-1/4
2-1/2
2SR Series
1/16
2 HOLES
1-7/32
.080
1-1/2 SQ.
3/32
15/32
.440
.435
A
A
A
A
A
A
A
2Z22-2RR0308
2Z22-2RR0508
2Z22-2SR1008
2Z22-3DR1508
2Z22-2SR1508
2Z22-2RR1508
2Z22-2RR2508
6
7
8
3DR Series
* Shaft extension may be provided here in lieu of

grease fitting (special item).
INCH COMPONENT
Catalog Number *
4
5
3/4 SQ. (TYP)
9/16
10
Shaft
Extension
Gear
Ratio
Right
Right
Left
Left & Right
Left
Right
Right
3:1
5:1
10:1
15:1
15:1
15:1
25:1
Torque Capacity lbf in.

Ultimate
Static
35
35
25
25
25
25
25
Manual
Dynamic
28
28
20
20
20
20
20
4.2
4.2
3.0
3.0
3.0
3.0
3.0
11
12
13
14
15
12-16
REV: 08.10.12 mh
16
RIGHT ANGLE HELICAL GEAR SPEED REDUCERS

MULTIPLE RATIOS
PANEL-MOUNTED
LIGHT-DUTY
R
Inch
MATERIAL:
Housing and Base - Aluminum Alloy, Black Anodized

Gears - Hardened Steel, Helical
Shafts - Steel, Plated
T
1
SPECIFICATIONS:
Backlash: 3 Nominal

8 Including End Play
APPROX. WEIGHT:
4 oz.
Maximum Output Power @ 1800 rpm Input
For 1:1 ratio, any shaft may be used as input.
5/8
19/32
21/32
Duty
From 1:1 to
5:1 Ratio
From 10:1 to
25:1 Ratio
Intermittent
Continuous
1/8 hp (Max.)
1/15 hp (Max.)
1/12 hp (Max.)
1/20 hp (Max.)
INPUT
11/16
1-31/32
(REF)
7/16
2SR Series
3/4
SQ.
7/32
(TYP)
1/16
2 HOLES
29/32
1/2
1-1/2
1/2
3/32
15/32
1-5/32
3/8
A
A
A
A
A
A
A
A
A
A
A
A
A
2Z23-2SR0108
2Z23-2RR0108
2Z23-2SR0208
2Z23-2RR0208
2Z23-2RR0308
2Z23-3DR0408
2Z23-3DR0508
2Z23-2RR0508
2Z23-3DR1008
2Z23-2SR1008
2Z23-2RR1008
2Z23-3DR1508
2Z23-3DR2508
5
6
8
9
INCH COMPONENT
Catalog Number *
.250 +.000
(TYP) -.002
9/16
2RR Series
7/32
(TYP)
9/16
9/16
HEX
NUTS
3/8-32
THD 3-1/32
1/8
Shaft
Extension
Gear
Ratio
Left
Right
Left
Right
Right
Left & Right
Left & Right
Right
Left & Right
Left
Right
Left & Right
Left & Right
1:1
1:1
2:1
2:1
3:1
4:1
5:1
5:1
10:1
10:1
10:1
15:1
25:1

Ultimate
Static
35
35
35
35
35
35
35
35
25
25
25
25
25
Manual
Dynamic
28
28
28
28
28
28
28
28
20
20
20
20
20
4.2
4.2
4.2
4.2
4.2
4.2
4.2
4.2
3
3
3
3
3
10
11
12
13
14
15
12-17
REV: 08.10.12 mh
16
I
R
T
1
RIGHT ANGLE AND DUAL HELICAL GEAR DRIVES

1:1 RATIO
LIGHT-DUTY
Inch
MATERIAL:
29/64
Housing and Base - Aluminum Alloy

Gears - Steel
Shafts - Steel
Bearings - Oilite
29/32
SPECIFICATIONS:
Backlash: 6 Nominal
3
4
3/32
Any shaft can be used as input.

7/32
1-9/32
7/16
1/2
1-9/32
1-15/16
5
6
7
1/4
BOTH ENDS
IDENTICAL
11/16
1-15/16
Right Angle Drive
1/16
.406
A 2Z 1-2SR08
1-15/16
7/32
1-9/32
7/16
THREE ENDS
IDENTICAL
1-9/32
2-7/16
1/16
1/4
10
1/2
11/16
11
Dual Drive
.406
A 2Z 1-3SR08
12
13
Catalog Number
14
15
16
A 2 Z 1-2RR08
INCH COMPONENT
Right Angle Drives

A 2Z 1-2SR08
A 2Z 1-2RR08
Dual Drives
A 2Z 1-3SR08
12-18
Shaft
Extension
Shaft
Dia.
Gear
Ratio
Right
Left
1/4
1/4
Right
1/4
Approx.
Weight
Ultimate
Static
Manual
Dynamic
1:1
1:1
25
25
20
20
3
3
3-1/2
3-1/2
1:1
25
20
3-1/2
oz.
RIGHT ANGLE AND DUAL HELICAL GEAR DRIVES

1:1 RATIO
BALL BEARING
HEAVY-DUTY
R
Inch
MATERIAL:
Housing - Aluminum Alloy

Gears - Alloy Steel, Helical
Shafts - Steel
Bearings - Steel Ball
SPECIFICATION:
Backlash: 3 Nominal
Any shaft can be used as input.
1-5/16
2-1/32
1-9/32
3-5/16
1-1/2
2-1/32
11/16
.648
17/64
2 HOLES
4
2-9/16
3-5/16
1-1/2
1/4 R
1-5/16
2-1/32
3/4
Right Angle Drive
5/8
1.335
BOTH ENDS
IDENTICAL
3/8
.312
A 2Z 2-2RR12
1-1/2
.648
2-1/32
17/64
2 HOLES
1-5/16
3/4
4-1/16
1-1/2
2-1/32
10
Dual Drive
5/8
3-5/16
3/8
THREE ENDS
IDENTICAL
11
.312
A 2Z 2-3SR12
12
A 2Z 2-2SR12
INCH COMPONENT
Catalog Number
Right Angle Drives
A 2Z 2-2SR12
A 2Z 2-2RR12
Dual Drives
A 2Z 2-3SR12
Shaft
Extension
Shaft
Dia.
Gear
Ratio
Left
Right
3/8
3/8
Left or Right
3/8
Approx.
Weight
Ultimate
Static
Manual
Dynamic
1:1
1:1
150
150
75
75
15
15
1.2
1.2
1:1
150
75
15
1.3
lb.
12-19
13
14
15
16
I
R
T
1
2
RIGHT ANGLE HELICAL GEAR DRIVES

1:1 RATIO
PANEL-MOUNTED
LIGHT-DUTY
Inch
MATERIAL:
Housing - Aluminum Alloy

Gears - Steel, Helical
Shafts - Steel
Bearings - Oilite
SPECIFICATION:
Backlash: 6 Nominal
3
4
29/64
29/32
3/32
3/16 MAX
PANEL
THICKNESS
7
8
9
7/32
1-1/8
INPUT
7/16
1/2
1-33/64
3/8-32 THD
2-3/16
1-1/8
10
1-17/64
1/4
A 2Z 3-2RR08
.406
11
11/16
1/16
1-7/64
1-25/32
12
13
14
15
16
INCH COMPONENT
Catalog Number
Shaft
Extension
Shaft
Dia.
Gear
Ratio
A 2Z 3-2SR08
A 2Z 3-2RR08
Right
Left
1/4
1/4
1:1
1:1
12-20

Ultimate
Static
25
25
Manual
Dynamic
20
20
3
3
Approx.
Weight
oz.
3-1/2
3-1/2
MINIATURE RIGHT ANGLE HELICAL GEAR DRIVES

STANDARD-MOUNT
LIGHTWEIGHT
NOT FOR USE AS A SPEED INCREASER
R
Inch
MATERIAL:
Housing - Aluminum
Gears - Hardened Steel Helical
Shafts - Steel
Bearings - Brass
Special options on shaft,

material and ratios
2.25
.63
2 PLACES
FRONT
VIEW
.375
.188
.410 .002
CW
1.250
.250
.625
1.250
THRU BUSHING
2 PLACES
Fig. 1
Single Output Shaft
.875
.375
#10-24
2 PLACES
.43
.030
.410 .002
TOP
VIEW
7
2.88
.63
3 PLACES
FRONT
VIEW
CCW
CW
Fig. 2
Double Output Shaft
THRU BUSHING
3 PLACES
10
#10-24
2 PLACES
11
CW INPUT
.875
.21
.43
.375
NEW
.42
.410 .002
.030
13
TOP
VIEW
INCH COMPONENT
2Z1A-S11
2Z1A-S21
2Z1A-D11
2Z1A-D21
5
6
.42
A
A
A
A
3
4
BLIND BUSHING
2 PLACES
CW INPUT
.21
Catalog Number
Fig.
No.
Ratio
1
1
2
2
1:1
2:1
1:1
2:1
Max.
rpm
1800
1800
1800
1800
Max.
Continuous
hp
14
1/8
1/8
1/8
1/8
15
12-20A
16

PANEL-MOUNT
LIGHTWEIGHT
R
Inch
MATERIAL:
Housing - Aluminum
Shafts - Steel
Bearings - Brass
Special options on shaft,

material and ratios
2.25
.375
.63
FRONT
VIEW
.188
1.250
.59
PANEL
BUSHING
1.35
.410 .002
.250
CW
.625
1.250
BLIND BUSHING
2 PLACES
CW INPUT
Fig. 1
Single Output Shaft
.375
#10-24
2 PLACES
.875
.21
.43
.030
6
7
THRU
BUSHING
2.88
.63
2 PLACES
FRONT
VIEW
CCW
CW
.15
1.35
Fig. 2
Double Output Shaft
10
PANEL
BUSHING
CW INPUT
.875
.21
11
#10-24
2 PLACES
.43
.375
NEW
.42
.410 .002
.030
13
TOP
VIEW
INCH COMPONENT
2Z1A-S11P
2Z1A-S21P
2Z1A-D11P
2Z1A-D21P
.410 .002
TOP
VIEW
A
A
A
A
.42
Catalog Number
Fig.
No.
Ratio
Max.
rpm
Max.
Continuous
1
1
2
2
1:1
2:1
1:1
2:1
1800
1800
1800
1800
1/8
1/8
1/8
1/8
hp
12-20B
14
15
16

BASE-MOUNTED
LIGHTWEIGHT
R
Inch
MATERIAL:
Housing - Fiberglass Reinforced Nylon

Shafts - Steel
Bearings - Nonmetallic
T
1
Special options on shaft, material and ratios

.156
#8 SCREW
Fig. 1
Single Output Shaft
.63
.31
4
.250
.63
.625
1.88
1.25
.625
.50
.625
1.25
1.88
.41
.42
.42
5
6
1.25
.31
7
.63
.156
#8 SCREW
Fig. 2
Double Output Shaft
9
10
.625
.250
.63
11
1.88
1.25
.50
.625
.625
1.25
Catalog Number
A
A
A
A
2Z11-211
2Z11-221
2Z11-311
2Z11-321
.42
1.25
1.88
INCH COMPONENT
12
NEW
.41
.42
Fig.
No.
Ratio
1
1
2
2
1:1
2:1
1:1
2:1
Max.
rpm
1800
1800
1800
1800
13
Max.
Continuous
hp
1/8
1/8
1/8
1/8
12-21
14
15
16
I
R
T
1

PANEL-MOUNTED
LIGHTWEIGHT
Inch
MATERIAL:
Housing - Fiberglass Reinforced Nylon

Shafts - Steel
Bearings - Nonmetallic
Special options on shaft, material and ratios

.156
#8 SCREW
Fig. 1
Single Output Shaft
2 HEX
NUTS
.250
3/8-32
THREAD
.63
.31
.63
2.5
.625
1.25
.625
.50
.625
1.25
1.88
.41
.42
.42
1.25
.31
.63
.156
#8 SCREW
8
Fig. 2
Double Output Shaft
2 HEX
NUTS
10
.250
.625
3/8-32
THREAD
11
.63
2.5
1.25
.50
12
NEW
.625
.625
1.25
13
14
15
16
Catalog Number
A
A
A
A
2Z11-211P
2Z11-221P
2Z11-311P
2Z11-321P
12-22
.42
1.25
1.88
INCH COMPONENT
.41
.42
Fig.
No.
Ratio
Max.
rpm
Max.
Continuous
1
1
2
2
1:1
2:1
1:1
2:1
1800
1800
1800
1800
1/8
1/8
1/8
1/8
hp
RIGHT ANGLE HELICAL GEAR DRIVES MINI-SHAFT DRIVE

1:1 RATIO
HEAVY-DUTY SEALED BALL BEARINGS
RIGHT- OR LEFT-HAND ROTATION
RATED SPEEDS UP TO 1800 RPM
O-RING SEALED GEAR CASE
KEYS INCLUDED
SIMPLY ADD KEYED SHAFTING
R
Inch
MATERIAL:
T
1
Shafts - 1144 Steel, Hollow Bore

Gears - 1045 Heat-Treated Steel
Case - Aluminum Alloy, Hard-Anodized
.815 (4x)
MAXIMUM OPERATING TEMPERATURE:

+200F
See page 12-27 for sizing equations.

.815 (4x)
2.38 SQ.
1.19
.937
2.87
.31 (TYP)
8X #10-32
.40 DP
1.000/1.002
B
Output
Torque
rpm
lbf in.
33
50
100
150
200
300
400
500
600
1000
1200
1800
SHAFT ROTATION
Type
RH
LH
Shaft
"A"
CCW
CCW
"B"
CW
CCW
INCH COMPONENT
Catalog Number
1:1 Ratio
S991MY-5050LH
S991MY-5050RH
S991MY-5062LH
S991MY-5062RH
S991MY-6262LH
S991MY-6262RH
59
51
41
36
32
28
21
19
18
15
14
12
Type
Hollow
A
Bore
Size
Hollow
B
Bore
Size
LH
RH
LH
RH
LH
RH
1/2
1/2
1/2
1/2
5/8
5/8
1/2
1/2
5/8
5/8
5/8
5/8
12-23
8
9
10
11
12
13
14
15
16
I
R
T
1
RIGHT ANGLE HELICAL GEAR DRIVES HOLLOW-SHAFT DRIVE

2:1 RATIO
Inch
MATERIAL:

+200F
1.36
(2x)
4
5
6
3.50
1.75
'A' BORE - 30 TOOTH GEAR

'B' BORE - 15 TOOTH GEAR
1.51
1.76
1.29
2.250
5.76
1.50 (2x)
1/4-28
SET
SCREW
(8x)
7
8
9
10
1.00 (2x)
1/4-20
.44 DP (4x)
Sealed gear case
Built-in keyway
Keys included
Simply add keyed shafting
"B"
CW
CCW
12
INCH COMPONENT
Catalog Number
16
Gear Reducer
Input
rpm
33
50
100
200
300
400
500
1000
1200
Shaft
"A"
CW
CW
RH
LH
15
1.25
(TYP)
Theoretical Output Torque, lbf in.
SHAFT ROTATION
11
14
3.022
FEATURES:
Type
13
MOUNTING
SURFACE
2:1 Ratio
S991HY-C6262LH
S991HY-C6262RH
S991HY-C6275LH
S991HY-C6275RH
S991HY-C7562LH
S991HY-C7562RH
S991HY-C7575LH
S991HY-C7575RH
12-24
Output
Torque
293
254
203
161
140
100
91
73
70
Speed Increaser
Output
rpm
33
50
100
200
300
400
500
1000
1200
Type
Hollow
A
Bore
Size
Hollow
B
Bore
Size
LH
RH
LH
RH
LH
RH
LH
RH
5/8
5/8
5/8
5/8
3/4
3/4
3/4
3/4
5/8
5/8
3/4
3/4
5/8
5/8
3/4
3/4
Output
Torque
73
64
51
40
35
25
23
18
17
RIGHT ANGLE HELICAL GEAR DRIVES HOLLOW-SHAFT DRIVE

1:1 OR 1.5:1 RATIOS
R
Inch
MATERIAL:

T
1

+200F

1.36
3.50
1.75
4.75 (TYP)
1.51
2.38
.25 (TYP)
KEYWAY 3/16 x 3/32 (TYP)

A
1.76
1.29
1.25
(TYP)
A
5.76
2.502/2.500
B
MTG.
1.00 SURFACE
1/4-20,
.44 DP (4x)
FEATURES:
Sealed gear case.
Built-in keyway.
Keys included.
Simply add keyed shafting.
1:1 RATIO
SHAFT ROTATION
Type
RH
LH
Shaft
"A"
CW
CW
"B"
CW
CCW
INCH COMPONENT
Catalog Number
1:1 Ratio
S991HY-A6262LH
S991HY-A6262RH
S991HY-A6275LH
S991HY-A6275RH
S991HY-A7575LH
S991HY-A7575RH
1.5:1 Ratio
S991HY-B6262LH
S991HY-B6262RH
S991HY-B6275LH
S991HY-B6275RH
S991HY-B7575LH
S991HY-B7575RH
rpm
Output
Torque
33
50
100
200
300
400
500
1000
1200
236
205
163
130
113
80
73
59
56
lbf in.
4
5
1.25
B
3.022
1/4-28
SET
SCREW
(8x)
1.5:1 RATIO Theoretical Output Torque, lbf in.

Gear Reducer
Speed Increaser
Input
rpm
33
50
100
200
300
400
500
1000
1200
Output
Torque
246
213
170
135
118
83
76
61
59
Output
Torque
110
96
76
61
53
37
34
27
26
Output
rpm
33
50
100
200
300
400
500
1000
1200
Type
Hollow
A
Bore
Size
Hollow
B
Bore
Size
LH
RH
LH
RH
LH
RH
5/8
5/8
5/8
5/8
3/4
3/4
5/8
5/8
3/4
3/4
3/4
3/4
LH
RH
LH
RH
LH
RH
5/8
5/8
5/8
5/8
3/4
3/4
5/8
5/8
3/4
3/4
3/4
3/4
12-25
6
7
8
9
10
11
12
13
14
15
16
I
R
T
RIGHT ANGLE HELICAL GEAR DRIVES KEY DRIVE

1:1 RATIO
SEALED GEAR CASE
KEYS INCLUDED
Inch
2-Shafts
MATERIAL:
Gears & Shafts - 4140 Heat-Treated Steel

.937
+200F
Optional foot mount available. See page 12-27 for
foot mounts and sizing equations.
6
7
1.315
1.40
lbf in.
33
50
100
150
200
300
400
500
600
1000
1200
1800
KEYWAY 1/8 x 1/16 x 3/4

4.63 (TYP)
1.19
2.315
59
51
41
36
32
28
21
19
18
15
14
12
Type
RH
LH
.815
"B"
CW
CCW
#10-32,
.40 DP (8x)
1.315
.815
3-Shafts
2.38
1.937
2.874
15
16
1.63
.50
(TYP)
1.40
KEYWAY 1/8 x 1/16 x 3/4

4.63 (TYP)
1.19
2.315
2.00
A
.937
B
1.005
INCH COMPONENT
Catalog Number
14
.815
1.63
1.630
1.630
11
13
2.00
.815
Shaft
"A"
CCW
CCW
2.38
.937
10
12
#10-32,
.40 DP (8x)
.50
(TYP)
A 1.931
2.874 1.005
SHAFT ROTATION
1.005
Output
Torque
rpm
A
B
3
4
KEYWAY 1/8 x 1/16 x 3/4

1.19
2.315
2.00
2.38
1.937
2.87
2 - Shafts
S991SY-RH2
S991SY-LH2
3 - Shafts
S991SY-RH3
S991SY-LH3
4 - Shafts
S991SY-RH4
S991SY-LH4
12-26
Type
Shaft
Size
"A" & "B"
RH
LH
1/2
1/2
RH
LH
1/2
1/2
RH
LH
1/2
1/2
1.315
1.40
#10-32,
.40 DP (8x)
.50
(TYP)
.815
4-Shafts
1.63
.815
1.63
FOOT MOUNTS FOR KEY-DRIVE

MATERIAL:
6061 Aluminum Alloy
FINISH:
Inch
Black Anodized
Sold as a set of 2
with screws.
OPTIONAL
UNIVERSAL
FOOT MOUNTS
(SHOWN
ASSEMBLED)
1.50
.25
0.75 1.00
INCH COMPONENT
Catalog Number
2.0
.125
2
3
S9957Y-UFM
4
5
R .125 (TYP)
.25 (TYP)
.25
.266 (4x)
1.094
.2 (8x)
1.50 1
8
1.0
1.50
.50
SIZING EQUATIONS*
Easy Sizing for 2:1 Ratio Drive
Easy Sizing for 1:1 and 3:2 Ratio Drives
As a Gear Reducer:
As a Gear Reducer:
Output Torque
Input Torque, =
1.24
lbf in.
As a Speed Increaser:
Output Torque
Input Torque, =
.31
lbf in.
10
11
1:1 Ratio
Output Torque
Input Torque, =
.60
lbf in.
12
3:2 Ratio
Output Torque
Input Torque, =
.78
lbf in.
13
As a Speed Increaser:
* These equations are supplied as a guide.
It is suggested that each application be
prototyped and tested.
3:2 Ratio
Output Torque
Input Torque, =
.35
lbf in.
14
15
12-27
16
13 - CLUTCHES AND BRAKES

R
Inch
In-Line Slip Clutches

Steel Housing pg. 13-3
In-Line Slip Clutches

Aluminum Housing pg. 13-3
Spring-Wrapped Slip Clutches

pg. 13-7
Spring-Wrapped Slip Couplings

pg. 13-9
Magnetic Clutches & Couplings

pg. 13-14

pg. 13-15

pg. 13-16
Roller Clutches
pg. 13-17
Roller Clutches with Bearing Support

pg. 13-18
1
2
3
4
5
6
7
8
9
Needle Roller Clutch Pressbearings

pg. 13-19
Hysteresis Clutches Electromagnetic Spring Wrap Clutches

pg. 13-23
pg. 13-26
10
11
Electromagnetic Spring Wrap Clutches

pg. 13-27
Power-Off Servo Brakes

pgs. 13-29 & 13-30
Power-On Flange-Mounted Brakes

pg. 13-31
Power-Off Cap Style Brakes

pg. 13-32
Power-Off Parallel Plate Brakes

pg. 13-33
Shaft-Mounted Clutches
pg. 13-35
12
13
14
15
16
13-2
13-0
13 - CLUTCHES AND BRAKES

R
Inch
Shaft-Mounted Clutch Couplings

pg. 13-36
Flange-Mounted Clutches
pg. 13-37
Flange-Mounted Clutch Couplings

pg. 13-38
T
1
2
3
Through Shaft Mount Slip Clutches

pg. 13-40
Shaft-To-Shaft Mount Slip Clutches

pg. 13-42
Precision In-Line Slip Clutches

Pin & Clamp Type
pg. 13-44
4
5
Precision Slip Clutch Assemblies
Pin Type
pg. 13-45
Precision Slip Clutch Assemblies

Clamp Type
pg. 13-45
Standard Slip Clutch Assemblies

Pin Type
pg. 13- 46
6
7
8
Standard Slip Clutch Assemblies

Clamp Type
pg. 13-46
Magnetic Particle Clutches

pg. 13-48
Magnetic Particle Brakes

pg. 13-49
9
10
Magnetic Clutches & Clutch Brakes

pg. 13-54
Reverse-Acting Brakes
pg. 13-55
Clutches & Clutch Brakes

pg. 13-56
11
12
13
Clutches & Clutch Brakes

pg. 13-57
Triplex Clutches
pg. 13-60
Reverse-Acting Clutches &

Clutch Brakes
pg. 13-58
Also:
Enclosed Power Supply - pg. 13-50
Open Power Supply - pg. 13-51
Follower Arm Potentiometer - pg. 13-52
Ultrasonic Sensor - pg. 13-53
Reverse-Acting Brakes
pg. 13-59
14
15
13-1
16
MULTIPLATE IN-LINE SLIP CLUTCHES

R
Inch
T
1
2
FUNCTION:
Multiplate slip clutches control torque for intermittent, continuous, or overload slip. It will drive in
both directions, slip when the torque setting is reached, and resume driving as the load is reduced.
These clutches are excellent as continuous or intermittent drag brakes, protection against overloads,
for soft starts, slip at the end of a stroke, as friction hinges, for screwing on container caps, etc.
OUTPUT
PULLEY
FRICTION PADS
THRUST
INNER PLATES
PLATE
(DRIVING)
OUTER PLATES
(DRIVEN)
SPRINGS
TORQUE PINS
HUB
3
4
5
INPUT
SHAFT
DETENT
PLATE
6
HOUSING
TORQUE
ADJUSTING
NUT
CARTRIDGE
INNER PLATES
MATE WITH
FLATS ON HUB
CONSTRUCTION:
8
9
10
11
12
The clutch consists of two assemblies: a cartridge and a housing (see cutaway above). The cartridge is set-screwed
or keyed to the input shaft. The housing is either set-screwed or keyed to the output shaft or, as shown, is attached to
the output gear or pulley with a bronze bearing to allow relative motion between the input shaft and the output gear/
pulley. Torque is transmitted from the flats on the hub to the mating flats on the inner plates, through the friction pads
to the outer plates, through the torque pins to the housing and the output gear/pulley. The torque level is controlled
by compressing the springs with the adjusting nut. For a fixed torque clutch, a collar is attached to the hub in a fixed
position instead of the adjusting nut. In operation, either the input shaft or the housing can be the input member, with
the other member being driven.
CAPACITY:
The clutch capacity as noted in the catalog is based on continuous operation at 50 rpm for over 25 million cycles.
Torque, rpm, duty cycle and life are interdependent. A reduction of any of these will allow an increase in any other.
Running at 25 rpm will allow twice the torque, or running for only 10% of the cycle will allow higher rpm, etc.
The limit is based on heat buildup measured in watts:

English Unit Watts = Torque (lbf) x rpm x 0.0118 x % Duty Cycle
Metric Unit Watts = Torque (Nm) x rpm x 0.104 x % Duty Cycle
For typical applications, see examples on page 13-4.
13
14
15
16
13-2
IN-LINE SLIP CLUTCHES

MULTIPLATE DESIGN
ADJUSTABLE TORQUE
R
Inch
MATERIAL:
Fig. 1 - Housing - Zinc Plated Steel

Plates - Brass

Friction Materials - Proprietary (Nonasbestos)
Fig. 2 - Housing - Aluminum

Plates - Brass

Friction Materials - Proprietary (Nonasbestos)
T
1
FEATURES:
Fully adjustable within rating limits.

Low stick / slip ratio.
Continuous slip within dissipation limit.
Available with bronze bearing in hub end so that
gear, pulley, etc. can be mounted on hub D.
2
3
Available with other bores as special order.
4
HOUSING
CARTRIDGE
5
A
ADJUSTING
NUT
6
B
Fig. 1
CARTRIDGE
HOUSING
E
2X E
Fig. 2
Fig. 2
S98CA6-MOC200424
S98CA6-MOC240640
S98CA6-MOC320846
S98CA6-MOC440846
*
A
D
B Bore
E Bore Depth Torque Dissip.* Friction
C
Body Std. Max.
Hub Hub
Range Power
Length
Dia. +.002 Bore
Dia. Length Hub Cart. ozf in. Watts Surfaces
.02
.02 -.000 Spec.
.02
End End @ 50 rpm
1.000
1.000
.250
.250
.375
.375
1.06
1.31
.76
.76
.25
.25
.31
.31
.75 .3 to 32
1.00 1.6 to 160
1.0
5.8
2
8
*
D
A
B Bore
C
E Bore Depth F G Torque Dissip.*
Body Std. Max. Lgth. Hub Hub
Range Power
Dia. +.002 Bore .02 Dia. Lgth. Hub Cart. Dia. Dia. ozf in. Watts
@ 50 rpm
End End
.02
.02 -.000 Spec.
1.250
1.500
2.000
2.750
.250
.375
.500
.500
.375
.500
.625
.625
1.50
2.50
2.87
2.87
.76
1.01
1.38
1.63
.25
.37
.50
.50
.50
.75
1.00
1.00
1.00
1.75
1.88
1.88
1.062
1.312
1.672
2.375
.094 1.6 to 192

.125 8 to 400
.188 12.8 to 800
.188 16 to 1200
6.0
14.5
29.0
43.0
Friction
Surfaces
Catalog Number
G
3 PINS @ 120
ON BOLT CIRCLE F
ADJUSTING
NUT
INCH COMPONENT
Fig. 1
S98CA6-MEC160417
S98CA6-MEC160421
Catalog Number
8
12
12
12
9
10
11
12
13
14
15
* See Technical Applications page.
13-3
16
EXAMPLES OF IN-LINE SLIP CLUTCH APPLICATIONS

UNLIMITED APPLICATIONS: *
R
T
1

Intermittent motion
Torque limiting
Indexing Hinging
Phase adjustment
Many more
Inch
Feeding
* The ingenuity of engineering has led to applications with labelers, indexing, film transport, instrumentation,
business machines, computer peripherals, packaging, mailing, plotters, paper feeds and many more.
We supply stock clutches or we work with you to develop units for your specific applications.
TYPICAL MULTIPLATE SLIP CLUTCH APPLICATIONS:
2
3
4
5
TIMING BELT ON HOUSING

Timing belt drives housing.
Torque transmitted through
adjustable pressure plates to
shaft. Also operates as shaft
input to timing belt.
SHAFT-TO-SHAFT CONTROL
Either shaft as input.
Fixed torque transmitted
through pressure plates.
Shafts must be journalized.
Also can be adjustable torque.
SLIP CARTRIDGE WITH GEAR

Pressure pads transmit torque
directly to gear for space
saving package.
CLUTCH WITH A MODIFIED GEAR

Torque transmitted directly from
gear through pins to adjustable
pressure plates.
KNOB WITH TORQUE PROTECTION

Knob connected directly to housing.
Fixed torque transmitted to shaft.
Will slip above preset torque.
BRAKE TO FRAME OF MACHINE

Outer pressure plates held to
machine frame. Adjustable braking
pressure transmitted to shaft.
6
7
8
9
LATCH
10
YOUR
SPOOL
11
12
13
SINGLE REVOLUTION CLUTCH

Input shaft turns continuously.
Output shaft turns when latch is disengaged.
Single revolution, partial revolution, or
multi-revolutions can be designed.
14
15
16
13-4
CONSTANT TORQUE SUPPLY OR REWIND SPOOL

Slip clutch mounted directly to spool will give constant
torque. Mounted directly to constant diameter cylinder
will give constant tension. Many variations available
to control wire supply system.
SPRING-WRAPPED SLIP CLUTCHES

FEATURES:

Long life under continuous slip conditions.
Unidirectional or bidirectional operation.
Same or different clockwise and counterclockwise torques.
Inch
Precise and stable limit torque calibration (range: 1.0 to 480 ozf in.).
0
1
Same torque at breakaway as at high slip velocities.
Mounting provisions for gear, sprocket or pulley.
Corrosion-resistant materials.
R
T
1
APPLICATIONS:
Tension control of film or tape drives

Transmission overload protection

SPECIAL DESIGNS:
The standard line of slip elements provides a wide selection of limit torques, sizes and coupling arrangements.
In addition, our engineers will modify designs to meet your specific requirements in such areas as:
Configuration
Driving arrangement
Limit torques from a fraction of an ozf in. to several lbf ft.
Calibration of torque to a tolerance of 5%
Different limit torques for the two directions of rotation
Spring windup and limit torque combination. The spring action of the slip element is useful for tensioning of
tape and prevention of slack loops.
* Stock units are calibrated with equal clockwise and counterclockwise slip torques corresponding to the tabulated
Upper Limit Torques. Other torques are readily available from full, down to 1/8 of the Upper Limit Torque for each model.
Torque values are independent of each other for clockwise and counterclockwise rotation, and may be specified the
same or different for the two directions.
** All clutches in this series have a pilot diameter K and three tapped holes N for mounting a gear, sprocket or
pulley on the input hub. Screw penetration into the clutch housing must not exceed the depth specified in column N.
Concentricity of pilot diameter K to bore C is .001 T.I.R. max.
All slip clutches are designed for long life under continuous slip conditions. The useful life of these elements is a
function of the transmitted torque and slip speed.
The life of the slip couplings & clutches is defined as the number of hours of continuous slip required to cause a
deviation of 10% from the initial calibrated torque value. Extensive life tests have been performed on a number of
standard units. The Life Expectancy Curves are designed for approximating the life span of standard slip clutches
and couplings.
3
4
5
6
7
8
9
10
11
12
13
14
15
13-5
16

EXAMPLE:

If a slip clutch is to provide a torque limit of 50 ozf in. at a continuous slip speed of 100 rpm for
500 hours, the smallest item which can be calibrated is from the S9940YSWC15A.. series.
Inch
The upper limit torque for this unit is 80 ozf in.
T
1
Limit Torque Ratio =
Required Torque
= 50/80 = 0.63
Upper Limit Torque
From Life Expectancy Curves 100 rpm & 0.63 ratio:

Life = 2,800,000 Rev =
2,800,000 Rev
= 466.7 Hrs.
100 Rev / Min. x 60 Min. / Hour
The 466.7 hours life value is less than desired 500 hours.
The next larger slip clutch belongs to the S9940YSWC18A series.
The upper limit torque for this unit is 120 ozf in.
Limit Torque Ratio = 50/120 = 0.42

From Life Expectancy Curves for 100 rpm & 0.42 ratio:
A S9940YSWC18A.. series clutch will provide the desired life.
TYPICAL ELEMENT LIFE

(STANDARD CATALOG MODELS)
rpm
9
10
11
12
13
14
Torque
1/2 Upper Limit
Upper Limit
3,070
1,420
6,500
3,040
50
1/2 Upper Limit

Upper Limit
1,420
620
3,040
1,420
100
1/2 Upper Limit

Upper Limit
620
250
1,420
620
200
1/2 Upper Limit

Upper Limit
250
100
620
250
10 x 10 6
The table entitled Typical Element Life provides

life in hours of operation for some typical slip
speeds and torques of standard slip elements. The
torque is presented in terms of 1/2 and full upper
limit torque rating of a given slip element.
AVERAGE POWER DISSIPATION (P)

Continuous Slip P = .00074 TN
Cycle Slip P = .00074 TNC
where:
T = Slip Torque [ozf in.]
N = Average Slip Speed [rpm]
Duration of Slip / Cycle
C =
Duration of Cycle
9 x 10 6
8 x 10 6
.25
7 x 10 6
6 x 10 6
.30
5 x 10 6
.35
4 x 10 6
.40
3 x 10 6
.50
.60
.70
.80
.90
1.00
2 x 10 6
10 6
0
15
16
Hours of Continuous Hours of Operation

Duty Cycle:
Slip in
1 Sec. Slip, 1 Sec. Rest
Each Direction
25
7
8
4,800,000 Rev
= 800 Hrs.
100 Rev / Min. x 60 Min. / Hour
13-6
25
50
75 100 125 150 175 200
CONTINUOUS SLIP SPEED (rpm)
LIFE EXPECTANCY CURVES
LIMIT TORQUE RATIO
Life = 4,800,000 Rev =
LIFE (REVOLUTIONS OF SLIP)

COVERED BY U.S. PATENTS AND
PATENTS PENDING
R
Inch
T
1
2
3
A
D
B
OUTPUT
CUSTOMER'S**
INPUT
E
A
D
OUTPUT
K J
K J
H
H C
G
CUSTOMER'S**
INPUT
C
G
Fig. 1
Fig. 2
Catalog Number
C
Fig. Bore
No. +.0010
1.05
1.05
1.24
1.24
1.24
1.39
1.39
1.39
1.39
1.67
1.67
1.88
1.88
1.88
1.88
1.88
1.88
1.88
1.88
1.88
1.88
2.30
2.30
2.30
.18
.18
.21
.21
.21
.23
.23
.23
.23
.25
.25
.29
.29
.29
.29
.29
.29
.29
.32
.32
.32
.72
.72
.85
.85
.85
.94
.94
.94
.94
1.20
1.20
1.34
1.34
1.34
1.34
1.34
1.34
1.34
1.31
1.31
1.31
1.975
1.975
1.975
.080
.080
.095
.095
.095
.130
.130
.130
.130
.130
.130
.130
.130
.130
.130
.130
.130
.130
.130
.130
.130
.225
.225
.225
.03
.03
.04
.04
.04
.04
.04
.04
.04
.04
.04
.04
.04
.04
.04
.04
.04
.04
.04
.04
.04
.046
.046
.046
#2-56
#2-56
#4-40
#4-40
#4-40
#6-32
#6-32
#6-32
#6-32
#6-32
#6-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#8-32
#10-32
#10-32
#10-32
1/4-20
2@
120
-.0000
S9940Y-SWC06A02
S9940Y-SWC06A03
S9940Y-SWC10A03
S9940Y-SWC10A04
S9940Y-SWC10A05
S9940Y-SWC13A04
S9940Y-SWC13A05
S9940Y-SWC15A04
S9940Y-SWC15A05
S9940Y-SWC18A04
S9940Y-SWC18A05
S9940Y-SWC19A05
S9940Y-SWC19A06
S9940Y-SWC19A08
S9940Y-SWC22A04
S9940Y-SWC22A05
S9940Y-SWC22A06
S9940Y-SWC22A08
S9940Y-SWC26A05
S9940Y-SWC26A06
S9940Y-SWC26A08
S9940Y-SWC30A10
S9940Y-SWC30A12
S9940Y-SWC30A14
1
1
1
1
1
2
2
1
1
1
1
1
1
1
2
2
2
2
1
1
1
1
1
1
.1248
.1873
.1873
.2498
.3123
.2498
.3123
.2498
.3123
.2498
.3123
.3123
.3748
.4998
.2498
.3123
.3748
.4998
.3123
.3748
.4998
.6250
.7500
.8750
K
J
H
L
M
Dia. Dia. Dia.
Dia. Dia.
Max. Max. +.000
-.001
.51 .45 .374 .63
.51 .33 .374 .63
.88 .68 .499 1.00
.88 .68 .499 1.00
.88 .68 .499 1.00
1.01 .68 .499 1.25
1.01 .68 .499 1.25
1.26 .68 .499 1.50
1.26 .68 .499 1.50
1.51 .68 .499 1.87
1.51 .68 .499 1.87
1.51 .74 .749 1.87
1.51 .74 .749 1.87
1.51 .74 .749 1.87
2.01 .74 .749 2.25
2.01 .74 .749 2.25
2.01 .74 .749 2.25
2.01 .74 .749 2.25
2.01 .74 .749 2.62
2.01 .74 .749 2.62
2.01 .74 .749 2.62
3.01 1.10 1.124 3.00
3.01 1.10 1.124 3.00
3.01 1.10 1.124 3.00
.500
.500
.650
.650
.650
.925
.925
.925
.925
.780
.780
1.170
1.170
1.170
1.170
1.170
1.170
1.170
1.170
1.170
1.170
1.480
1.480
1.480
Upper*
Limit
Torque
ozf in.
#0-80
91
.08 DP.
#1-72 20 2
.10 DP.
#2-56
.11 DP.
48 5
80 8
120
12
150
15
#4-40
.17 DP.
240
24
360
36
#8-32
.210
DP.
480
50
* or ** See page 13-5
13-7
Max. Dissip.
Power Watts
INCH COMPONENT
1.0
1.0
2.4
2.4
2.4
5.7
5.7
9.5
9.5
14
14
18
18
18
28
28
28
28
43
43
43
57
57
57
8
9
10
11
12
13
14
15
16
SPRING-WRAPPED SLIP COUPLINGS

FEATURES:
R
T
1
2
3
4
5
6

Long life under continuous slip conditions.
Unidirectional or bidirectional operation.
Same or different clockwise and counterclockwise torques.
Inch
Precise and stable limit torque calibration (range: 1/2 to 88 ozf in.).
0
1
Same torque at breakaway as at high slip velocities.
Corrosion-resistant materials.
APPLICATIONS:
Tension control of film or tape

Transmission overload protection
Friction loads for testing components

RECOMMENDED MOUNTING PROCEDURE:
Coupling is slipped over one shaft and applicable screws tightened.

Second shaft is inserted into other end of coupling.
Pull loose end of coupling back about .02 in. and tighten applicable screws.
The slip coupling serves as a torque limiter as well as a coupling for two colinear shafts. This coupling is equipped
with hubs at both ends for pinning to the two shafts. When the load exceeds the limit torque of a slip coupling, the two
shafts rotate relative to each other at the full limit torque. The standard coupling is designed to operate with 3 angular
or linear misalignments of up to .010 in. between the two shafts. The mounting hole diameters of the slip couplings can
differ for the two ends, so that different diameters of in-line shafts can be coupled together.
* Stock units are calibrated with equal clockwise and counterclockwise slip torques corresponding to the tabulated
Upper Limit Torques. Other torques are readily available from full, down to 1/8 of the Upper Limit Torque for each model.
Torque values are independent of each other for clockwise and counterclockwise rotation, and may be specified the
same or different for the directions.
This series of slip couplings is designed for long life under continuous slip conditions. The useful life of these elements
is a function of the transmitted torque and slip speed.
7
8
9
10
11
12
13
14
15
16
13-8

COVERED BY U.S. PATENTS AND

PATENTS PENDING
R
Inch
T
1
J
SUB DRILL
BOTH ENDS
H
BOTH
ENDS
5
INCH COMPONENT
Catalog Number
H Set Screw #2-56
S9941Y-SWC05A22
S9941Y-SWC05A23
S9941Y-SWC05A33
S9941Y-SWC06A22
S9941Y-SWC06A23
S9941Y-SWC06A33
H Set Screw #4-40
S9941Y-SWC08A33
S9941Y-SWC08A34
S9941Y-SWC08A44
S9941Y-SWC10A33
S9941Y-SWC10A34
S9941Y-SWC10A44
H Set Screw #6-32
S9941Y-SWC13A44
S9941Y-SWC13A45
S9941Y-SWC13A46
S9941Y-SWC13A55
S9941Y-SWC13A56
S9941Y-SWC13A66
S9941Y-SWC15A55
S9941Y-SWC15A56
S9941Y-SWC15A58
S9941Y-SWC15A66
S9941Y-SWC15A68
S9941Y-SWC15A88
B
C
A
Bore Bore Dia.
+.0010 +.0010
-.0000 -.0000 .02
E
.03 Max.
.02
Upper *
J
Limit
Sub Torque
Drill ozf in.
Max.
Unit
Dissip. Weight
Power
oz.
watts
.1250
.1250
.1875
.1250
.1250
.1875
.1250
.1875
.1875
.1250
.1875
.1875
.50
.50
.50
.62
.62
.62
.89
.89
.89
.98
.98
.98
.50
.50
.50
.51
.51
.51
.43
.43
.43
.46
.46
.46
.17
.17
.17
.17
.17
.17
.029
.029
.029
.029
.029
.029
5 .7
5 .7
5 .7
8 1.0
8 1.0
8 1.0
.6
.6
.6
1.0
1.0
1.0
.6
.6
.6
.9
.9
.9
.1875
.1875
.2500
.1875
.1875
.2500
.1875
.2500
.2500
.1875
.2500
.2500
.75
.75
.75
1.00
1.00
1.00
1.11
1.11
1.11
1.26
1.26
1.26
.63
.63
.63
.76
.76
.76
.50
.50
.50
.55
.55
.55
.19
.19
.19
.19
.19
.19
.040
.040
.040
.040
.040
.040
12 1.2
12 1.2
12 1.2
20 2.0
20 2.0
20 2.0
1.5
1.5
1.5
2.4
2.4
2.4
1.2
1.2
1.2
2.6
2.6
2.6
.2500
.2500
.2500
.3125
.3125
.3750
.3125
.3125
.3125
.3750
.3750
.5000
.2500
.3125
.3750
.3125
.3750
.3750
.3125
.3750
.5000
.3750
.5000
.5000
1.25
1.25
1.25
1.25
1.25
1.25
1.50
1.50
1.50
1.50
1.50
1.50
1.43
1.43
1.43
1.43
1.43
1.43
1.56
1.56
1.56
1.56
1.56
1.56
1.01
1.01
1.01
1.01
1.01
1.01
1.26
1.26
1.26
1.26
1.26
1.26
.62
.62
.62
.62
.62
.62
.73
.73
.73
.73
.73
.73
.25
.25
.25
.25
.25
.25
.25
.25
.25
.25
.25
.25
.055
.055
.055
.055
.055
.055
.055
.055
.055
.055
.055
.055
48 5.0
48 5.0
48 5.0
48 5.0
48 5.0
48 5.0
88 9.0
88 9.0
88 9.0
88 9.0
88 9.0
88 9.0
5.7
5.7
5.7
5.7
5.7
5.7
10.5
10.5
10.5
10.5
10.5
10.5
3.8
3.8
3.8
3.8
3.8
3.8
6.5
6.5
6.5
6.5
6.5
6.5
* See preceding page.
7
8
9
10
11
12
13
14
15
13-9
16
MAGNETIC CLUTCHES & COUPLINGS

APPLICATIONS EXAMPLES
R
T
UNWIND TENSION CONTROL

Brake mounted on shaft of unwind spool or bobbin.
Film
1
2
Inch
How to size:
Avg. radius = [Full roll dia. + Empty dia.] / 4

= (6 +3) / 4 = 2.25 in.
Avg. torque (lbf in.) = avg. tension (lbf) x avg. radius
(in.) = 1 x 2.25 = 2.25 lbf in.
Brake
3
4
Information required: (Example)

Full diameter = 6 in.
Empty core diameter = 3 in.
Average tension = 1 lbf
Velocity = 150 ft./min.
Film Unwind - Tension provided by hysteresis units.
1. Select Catalog Number S90MCC-MTL37505

based on 2.25 lbf in.
2. Check Operating Curve
The Max. rpm occurs at the min. radius
Max. rpm = Velocity / (Empty dia. x )

= (150 ft./min.) / [(0.25 feet) x ]

= 191 rpm
2.25 lbf in. at 191 rpm is okay.
5
NIP ROLL OR PULLEY TENSION CONTROL
Motor
Brake
7
8
Clutch
Motor
Bobbin
9
10
11
12
Coil Winding - Constant tension provided by hysteresis unit.
Film Tensioning - Constant tensioning supplied by

hysteresis unit.

Pulley diameter or nip roll = 3 in.
Tension = 2.5 lbf
Velocity = 300 ft./min.

based on 3.75 lbf in.
Max. rpm = (300 ft./min.) / (0.25 ft. x ) = 382 rpm
382 rpm is too high for continuous duty on the
S90MCC-MTL37505 unit.
How to size:
Torque (lbf in.) = Tension x Radius

= 2.5 lbf x [(3 in.) / 2] = 3.75 lbf in.
13
14
15
16
13-10

APPLICATIONS EXAMPLES
R
Inch
CYCLING

Slip rpm = 350 rpm
Torque = 8 lbf in.
Duty cycle (% slip time of total cycle time) = 25%
Clutch
How to size:
based on 8 lbf in.
350 rpm is high, but as the duty cycle is only 25%,
the Catalog Number S90MCC-MTL62510 is okay.
Bottle Capping - Constant torque provided by a

hysteresis clutch.
T
1
2
3
4
5
OVERLOAD PROTECTION TORQUE LIMITING SOFT START (Motor Horsepower Method)
6
Sub Shaft
Adapter
Motor
Conveyor
Clutch
Motor
Chain and
Sprocket
Drive
8
Coupling
Torque Limiting - Hysteresis clutch provides overload

protection.
Material Handling - Hysteresis clutch can provide

overload protection and soft start.

Motor hp = 1/10 hp
Motor rpm = 900 rpm

How to size:
Torque (lbf in.) = (Motor hp x 63000) / Motor rpm

= [1/10 hp x 63000] / 900 = 7 lbf in.

based on 7 lbf in.
7 lbf in. is at the upper limit of safe continuous
operation, but is okay.
10
11
12
13
14
15
13-11
16

R
T
1
2
3
4
5
6
ADVANTAGES:
Inch
No electricity
No breakaway torque
Constant torque independent of shaft (rotor) speed
No contacting or wearing parts
No friction elements same smooth torque year after year
No magnetic particles to leak or contaminate end product
Operable in some of the most difficult environments
Brake (with shaft) and clutch (with hollow shaft) available
Custom designs available
0
50%
75%
100%
Fig. 1
APPLICATIONS:
25%
50%
Fig. 1 As a Coupling
This is for load protection or torque limiting. The coupling style
unit is directly connected to a motor and turns at the same speed
as the motor until the torque is reached. At this point it will slip
and still generate the maximum torque.
75%
100%
Fig. 2
Fig. 2 As a Clutch
The unit is connected to a motor by a timing
belt or gear. The housing is driven and the
shaft is the output end.
25%
50%
75%
100%
Fig. 3 As a Payout Brake

Brake is stationary and the reel or material
is fitted to the output shaft. The tension on
the material will vary with the diameter.
Fig. 3
HOW THEY OPERATE:
7
8
9
10
For Maximum Torque

All important internal clearances are ground to tolerances
of less than .001 in. (0.025 mm). Magnet assemblies surround
hysteresis assembly. When like poles face each other, they
produce maximum magnetic saturation of the hysteresis disc,
forcing lines of flux to travel circumferentially through the
hysteresis disc.
For Minimum Torque
When opposite poles face each other they produce minimum
saturation of the hysteresis disc. The lines of flux travel
through the hysteresis disc.
Combinations of adjustment angles between the two extremes
give infinite adjustability. Because there are no contacting
surfaces, the setting can be maintained indefinitely.
11
Hysteresis
Assembly
Maximum
Torque
Magnetic
Assemblies
Minimum
Torque
Hysteresis
Assembly
Magnetic
Assemblies
12
13
14
15
16
25%
13-12

OPERATING CURVES
HOW TO USE THE CURVES:
Inch
Find the slip rpm on the X-axis and the torque on the Y-axis. Notice the areas that represent safe,
continuous duty; intermittent duty, such as five minutes on, five minutes off; and the area which
is not recommended. Operating above that line for any period of time will cause overheating
and possible damage to the unit.
3
Intermittent
Duty
0.226
Continuous
Duty
0.113
0.000
0
0
300 600 900 1200 1500 1800
SLIP (rpm)
1.197
1.130
1.017
0.904
0.791
0.678
0.565
0.452
0.339
0.226
0.113
0.000
1.695
15
1.130
Intermittent
Duty
Continuous
Duty
0.565
0.000
20
300
10
5
600
900
SLIP (rpm)
S90MCC-MTLA0025
S90MCC-MTL50025
S90MCC-MTL62525
S90MCC-MTL75025
S90MCC-MTL87525
S90MCCMMTL1628
1200
TORQUE (Nm)
2.260
25
TORQUE (lbf in.)
TORQUE (Nm)
Not
Recommended
4
10.6
10
9
8
7
6
5
4
3
2
1
0
1200
Not
Recommended
Intermittent
Duty
Continuous
Duty
300
600
900
SLIP (rpm)
S90MCC-MTL37510
S90MCC-MTL50010
S90MCC-MTL62510
S90MCCMMTL1612
70
6.77
Not
60
Recommended
50
4.52
2.26
30
20
Continuous
Duty
1.13
0
40
Intermittent
Duty
3.39
200
5
6
7
8
9
7.90
5.65
2
3
0
600 1200 1800 2400 3000 3600
SLIP (rpm)
S90MCC-MTL37505
S90MCCMMTL0806
2.825
TORQUE (lbf in.)
0.028
S90MCC-MTL25001
S90MCCMMTL0601
0.339
Continuous
Duty
Intermittent
Duty
T
1
TORQUE (lbf in.)
0.452
16
12
0.056
Not
Recommended
20
Not
Recommended
0.085
0.000
0
0 1500 3000 4500 6000 7500
SLIP (rpm)
S90MCCM513...
0.565
TORQUE (Nm)
.41
10
TORQUE (lbf in.)
.82
Continuous
Duty
0.003
0.113
1.23
Intermittent
Duty
0.006
1.64
TORQUE (Nm)
0.008
0.141
TORQUE (Nm)
0.011
2.05
TORQUE (ozf in.)
Not
Recommended
TORQUE (lbf in.)
TORQUE (Nm)
0.014
10
0
800 1000
400 600
SLIP (rpm)
S90MCC-806...
S90MCCMM806...
11
12
13
14
15
13-13
16
I
R
T

.130 lbf in. TORQUE
NONELECTRIC
NO WEARING PARTS
NO FRICTION
Inch
MATERIAL:
Housing and Shaft - Stainless Steel
1
2
3
M3-0.5 TAP .18 DEEP

3X EQ. SP. ON .610 B.C.
BOTH ENDS
.86
.04
1.02
B
6
7
8
9
10
.394
BOTH
ENDS
INCH COMPONENT
Catalog Number
S90MCC-5130151
S90MCC-5130198
S90MCC-5130651
S90MCC-5130698
S90MCC-5131351
S90MCC-5131398
11
12
13
14
15
16
13-14
B
Shaft Dia.
+.000
-.001
3/16
3/16
3/16
3/16
3/16
3/16
A
Shaft
Length
Torque
Range
Weight
.51
.98
.51
.98
.51
.98
.003 .018
.003 .018
.010 .060
.010 .060
.010 .130
.010 .130
.16
.16
.16
.16
.16
.16
lbf in.
lb.

25 lbf in. TORQUE
NONELECTRIC
NO WEARING PARTS
NO FRICTION
HOLLOW BORE
R
Inch
MATERIAL:
Housing - Aluminum, Black Anodized Finish

Dial - Steel, Black Oxide Finish
T
1
2
E
(3X) TAPPED
HOLES ON
BOTH ENDS
SET SCREW
2 PLACES
90 APART
L1
.08
d F
4
5
B
THRU
WITH KEYWAY (.625 BORE ONLY)
INCH COMPONENT
Catalog Number
B
Bore
Torque
Range
L
Length
L1
D
Dia.
d
Dia.
A
Dia.
1.65
2.44
2.52
3.11
2.52
3.11
2.52
3.11
3.11
3.11
3.11
1.42
2.12
2.20
2.67
2.20
2.67
2.20
2.67
2.67
2.67
2.67
1.87
2.71
3.23
4.57
3.23
4.57
3.23
4.57
4.57
4.57
4.57
1.95
2.76
3.31
4.68
3.31
4.68
3.31
4.68
4.68
4.68
4.68
.866
1.378
1.850
2.441
1.850
2.441
1.850
2.441
2.441
2.441
2.441
Bolt
Circle
1.260
1.890
2.375
3.000
2.375
3.000
2.375
3.000
3.000
3.000
3.000
Keyway
Approx.
Weight
1/8
1/8
3/16
3/16
3/16
3/16
1/4
.73
2.28
3.57
8.95
3.57
8.95
3.57
8.95
8.95
8.95
8.95
S90MCC-MTL25001
S90MCC-MTL37505
S90MCC-MTL37510
S90MCC-MTL37525
S90MCC-MTL50010
S90MCC-MTL50025
S90MCC-MTL62510
S90MCC-MTL62525
S90MCC-MTL75025
S90MCC-MTL87525
S90MCC-MTLA0025
+.001
-.000
.250
.375
.375
.375
.500
.500
.625
.625
.750
.875
1.000
Catalog Number
(Ref.)
F
Hub
Dia.
Set
Screw
Thread
Depth
S90MCC-MTL25001
S90MCC-MTL37505
S90MCC-MTL37510
S90MCC-MTL37525
S90MCC-MTL50010
S90MCC-MTL50025
S90MCC-MTL62510
S90MCC-MTL62525
S90MCC-MTL75025
S90MCC-MTL87525
S90MCC-MTLA0025
.75
1.06
.99
1.38
.99
1.38
1.46
1.38
1.38
1.38
1.96
M4
M4
M5
M5
M5
M5
M5
M5
M5
M5
M5
M4
M4
M5
M5
M5
M5
M5
M5
M5
M5
M5
.31
.39
.39
.47
.39
.47
.39
.47
.47
.47
.47
lbf in.
.06 1.25
.18 5.00
.50 10.60
1.00 25.00
.50 10.60
1.00 25.00
.50 10.60
1.00 25.00
1.00 25.00
1.00 25.00
1.00 25.00
lb.
13-15
8
9
10
11
12
13
14
15
16
I
R
T
1

70 lbf in. TORQUE
NONELECTRIC
NO WEARING PARTS
NO FRICTION
HOLLOW BORE
Inch
MATERIAL:
Housing - Aluminum, Black Anodized Finish

Dial - Steel, Black Oxide Finish
2
3
(2) 1/4-28 SET SCREWS 90

APART FOR LOCKING TORQUE
ADJUSTMENT
2.81
.67
.15
5
6
7
8
1/4-20 TAP .31 DP.

3X EQ. SP. ON A
2.875 B.C. BOTH
ENDS
4.12
+.000
2.441 -.001
4
6.30
.41 X .31
DEEP 2X BOTH
ENDS FOR TORQUE
ADJUSTMENT
CLAMP COLLAR
Keyway Dimensions
Bore
w +.002/-.000
h +.010/-.000
INCH COMPONENT
10
11
Catalog Number
S90MCC-80610
S90MCC-80612
S90MCC-80614
12
13
14
15
16
13-16
B
Bore
+.001
-.000
.625
.750
.875
.625 .750 .875

.187
.709
.187
.837
Torque
Range
Weight
3 70
3 70
3 70
14.2
14.2
14.2
lbf in.
lb.
ROLLER CLUTCHES
R
Inch
MATERIAL:

Cage - Nylon 66 (or Equivalent)
T
1
Grease +50F to +160F
FEATURES:
Ideal for indexing, backstopping

or overrunning operations.
Free rolling one way, drives in
opposite direction.
Lightweight, low profile.
High indexing frequency,
up to 4 CPS.
Minimum backlash.
3
d D
SHAFT REQUIREMENTS:
WHAT IT DOES:
Transmits torque load in one direction.

Overruns freely in opposite direction.
Either shaft or housing can be
driving member.
6
7
GEAR OVERRUNS
SHAFT COUNTERCLOCKWISE
GEAR DRIVES
SHAFT CLOCKWISE
GEAR DRIVES
THROUGH
CLUTCH
HOW IT WORKS:
Rollers wedge between shaft and outer

race. Positive wedging forces prevent
slipping. Springs position rollers for
instantaneous lockup.
CLEARANCE
EXAGGERATED
GEAR OVERRUNS
COUNTERCLOCKWISE
* S99NH3-URC0204
S99NH3-URC0408
S99NH3-URC0608
S99NH3-URC0808
S99NH3-URC1010
S99NH3-URC1210
9
10
DRIVEN SHAFT
STATIONARY SHAFT
CAUSES ROLLER TO MOVE
OUT OF WEDGE TO RELEASE
CLUTCH WHEN OVERRUNNING
11
12
INCH COMPONENT
Catalog Number
Bore
1/8
1/4
3/8
1/2
5/8
3/4
D
O.D.
9/32
7/16
5/8
3/4
7/8
1
W
Clutch
Width
+.00
-.01
.250
.500
.500
.500
.625
.625
d
Max.
Recom. Housing
Torque Shaft Dia. Bore
+.001
lbf in.
2.86
18.60
50.40
85.90
175.20
206.00
+.0000
-.0005
.1250
.2500
.3750
.5000
.6250
.7500
-.000
.2812
.4370
.6245
.7495
.8745
.9995
Max. Rotating
Overrun Speed
rpm
Shaft
50000
21000
14000
11000
8500
12000
Housing
30000
12000
12000
9000
5000
7000
* Plastic Springs
13-17
13
14
15
16
I
R
ROLLER CLUTCHES WITH BEARING SUPPORT

Inch
MATERIAL:
T
1

Cage - Plastic
SHAFT REQUIREMENTS:
2
3
4
W
5
6
7
8
9
INCH COMPONENT
10
Catalog Number
11
S99NH4-URC1228
S99NH4-URC2032
12
13
14
15
16
13-18
d
Shaft
Dia.
+.0000
-.0003
.375
.625
D
O.D.
.625
.875
Max. Rotating Load Ratings

Max.
W Torque Overrun Speed
lbf
rpm
Width lbf in.
.875
1.000
50.4
175.2
Shaft
14000
8500
Recommended
Housing Bore
Tolerance
Housing Dynamic Static Steel Aluminum

12000
1350
1240 .0005 +.0001/-.0009
5000
1720
1890 .0005 +.0000/-.0010

SELF-CLINCHING
NONALIGNING
R
Inch
MATERIAL:
Clutch - Drawn Cup Needle

Housing - Carbon Steel, Zinc Plated
T
1
-22F to +212F
FEATURES:

KNURLING
SHAFT REQUIREMENTS:
4
I.D.
5
6
C
A
7
D
.06
MINIMUM
PANEL THICKNESS
INCH COMPONENT
Catalog Number *
Direction
of
Rotation
Nom.
I.D.
A 7Z49-FSC250CW
A 7Z49-FSC375CW
CW
CW
1/4
3/8
Shaft Diameter
Max.
Min.
.2500
.3750
.2495
.3745
Catalog Number
(Ref.)
D
Height
Max.
Speed
A 7Z49-FSC250CW
A 7Z49-FSC375CW
.94
1.00
12000
12000

When viewed from the serrated end of the retainer.
rpm
A
Panel Hole Dia.
+.003
-.000
.625
.875
Max.
Torque
lbf in.
18.6
50.4
C
Knurl
O.D.
.67
.92
Max.
Radial
Load
lbf
430
600
10
11
12
13
14
15
13-19
16
I
R
T
1
2
3
4

FOR NEEDLE ROLLER CLUTCH PRESSBEARINGS PHONE: 516.328.3300 FAX: 516.326.8827 WWW.SDP-SI.COM
NONALIGNING
Inch
INSTALLATION:
0
1

B

CL
PANEL
5
6
7
Nominal
Shaft
Diameter
1/4
3/8
+.003
-.000
.625
.875
N
Anvil
Dia.
+.005
-.000
.640
.890
O
Minimum
Anvil
Depth
P
Press Tool
Minimum
Dia.
1.14
1.20
.87
1.12
F
CL
Install Force
Min. Dist.
Cold-Rolled
Centerline to
Steel
Panel Edge
tons
.45
.62
5.5
6.0
8
9
10
11
12
13
14
15
16
A
Panel
Hole Dia.
13-20
HYSTERESIS BRAKES & CLUTCHES

TECHNICAL INFORMATION
FEATURES:
Torque proportional to input current.

Torque virtually independent of slip speed.
Smooth stable, noise-free operation.
Long-life no-wearing components.
Maintenance-free.
Infinitely adjustable.
Inch
T
1
APPLICATIONS:
Tensioning of wire, cable, films, paper, etc.

Positioning of fuel flow controls, film processors
Braking for motors and dereeling
Load simulation for motor testing, fuse testing, etc.
OPTIONS:
Nonstandard coil voltages

Special mounting configurations
Modified shafts
Hysteresis clutches provide an efficient, smooth, electrically controllable link between a motor and a load. While presenting integral ball bearing supported input and output shafts, the clutch features a field (electromagnet) assembly that
is prevented from rotating by fixing to a bulkhead. When the coil is energized, the input and output shafts are coupled by
magnetic fluxes, thus driving the load. The torque transmitted is proportional to the current supplied to the device.
4
5
TORQUE AS A FUNCTION OF INPUT CURRENT:
6
7
100%
TORQUE
When a field setting is approached from zero

current, it will produce less torque than if
approached from prior current because of
residual magnetism. Accurate and repeatable
torque outputs are delivered when the setting
is approached from the same direction.
8
9
10
0
0
11
100%
CURRENT
12
13
14
15
13-21
16
HYSTERESIS BRAKES & CLUTCHES

TECHNICAL INFORMATION
R
T
1
2
3
4
APPLICATION EXAMPLE:
Inch
To select a brake to tension a 7-inch (178 mm)

diameter pay-off reel in a system requiring total
(web or strand) tension of 2 lbf (8.9 N) and a
process speed of 600 FPM.
BRAKE TORQUE
(T) = Force (F) X Radius (D/2)

T = 2 lbf (8.9 N) X 3.5 in. (88.9 mm) = 7 lbf in. (791 Nmm)
or T = 32 ozf X 3.5 in. (88.9 mm) = 112 ozf in.
SLIP SPEED
(rpm) = linear velocity (V) (in./min.) / circumference (in.)

or linear velocity (V) (mm/min.) /circumference (mm)
rpm = 600 ft./min. X 12 / ( X 7 in.) or (183 m/min. X 1000) / ( X 178 mm)
rpm = 327
ENERGY
(W) = Energy Dissipation requirement is calculated using basic
DISSIPATION
horsepower formula X 746 watts/hp

W = (T (lbf in.) X rpm / 63025) X 746 or (T (Nmm) X rpm / 7145221) X 746

W = (7 lbf in. X 327 rpm / 63025) X 746 = 27 watts or (791 Nmm X 327 rpm / 7145221) X 746 = 27 watts
Velocity/Feed Rate (V)
Total Web/strand
Tension (F)
6
Full Roll
Dia. (D)
7
8
9
10
11
12
13
14
15
16
Hysteresis
Brake
Quick Check: The curves to the left
can be used as a quick check to verify
the kinetic power calculation. Simply
locate the required torque on the vertical
axis, move horizontally until you intersect
the appropriate speed line, and then
read vertically (up or down) to obtain the
resulting watts or horsepower.
Selection: From the data on the following pages it can be seen that an
S90HYB-120024 Hysteresis Brake which
has a rated torque of 120 ozf in. (847
Nmm), a maximum speed capability of
12000 rpm, and an energy dissipation capability of 75 watts continuous, would be
the proper selection for this application.
Note: In a clutch application, slip speed
is the difference in rotational speed
between the input and output members
of the clutch assembly. In the above
example, tensioning was being accomplished with a clutch inserted between
a take-up reel and a motor driving at 500
rpm. The actual slip used to compute the
energy dissipation requirements would
be 500 rpm (clutch input speed) - 327 rpm
(clutch output speed = 173 rpm). This difference in speed would obviously impact
the result for energy dissipation.
13-22
WATTS
ozf in. lbf in. 3.7
1600
100
7.5
15
22
37
75
m
rp 0
10
150 225
373
20
200
40
example
10
0
80
00
12
120
2250
3730
1500
m
rp 25
17
50
34
00
60
0
00
12
400
746
00
24
32
16
8
2.5
2.0
1.6
.1
.005
.01
.02 .03
.1
.2
.3
.05
1
.5
HORSEPOWER
5.0
2
3
HYSTERESIS CLUTCHES
MAINTENANCE-FREE
INFINITELY ADJUSTABLE
TORQUE INDEPENDENT OF SLIP SPEED
R
Inch
COIL DATA:
Voltage: 24V DC
Maximum recommended speed is 3600 rpm
1
2
.375
F
3
R
P
J
K THREAD
X L DEEP, 3 HOLES
EQUALLY SPACED
ON A M B.C.
N
G
F
F
E
D C
A
E
7
8
INCH COMPONENT
Catalog Number *
S90HYC-231A19
S90HYC-500A50
S90HYC-638A50
Catalog Number *
(Ref.)
S90HYC-231A19
S90HYC-500A50
S90HYC-638A50
Min.Static Max. Drag

Max.
Max.
C
B
Torque
Torque
Output
Wattage Input
A
Dissipation
@ rated De-Energized @ rated Inertia
Inertia
Dia. Dia. Dia.
Capacity
+.0000 +.0000
& Degaussed V DC lbf in. sec2 lbf in. sec2
V DC
.015 -.0005 -.0005
Watts
ozf in.
ozf in.
@ 25C
30.0
8.3 x 10-3 1.4 x 10-3
.70
8
20
2.312 .1875 .3750
200.0
2.50
8
371.0 x 10-3 44.5 x 10-3
120
5.000 .5000 .7497
-3
-3
400.0
7.00
8
860.0 x 10 128.5 x 10
150
6.375 .5000 .7497
D
Dia.
+.0000
-.0005
.8750
1.6250
1.6250
.005 .015 Min. .005 .015

.020 .375 .75
.030 1.000 1.25
.030 1.000 1.25
.125 1.775 #6-32

.220 2.750 #10-32
.220 3.220 #10-32
9
10
Min.
Dia. .025 .010 .010
Weight
lb.
11
.250
.562
.562
1.250 2.750 1.125 3.920

2.500 4.500 2.220 6.815
2.500 4.930 2.220 7.245
1.65
14.00
29.00
12
13
14
15
13-23
16
CLUTCH & BRAKE TECHNICAL INFORMATION

R
INERTIA AND TORQUE VALUES
T
1
2
3
4
Inch
0
Determine clutch or brake torque value
With the inertia value calculated, determine
the torque requirement for the function.
NOTE: For hollow shafts, subtract WR2 of the I.D.

from the WR2 of the O.D. and multiply by length.
T=
A) For Overrunning and Start-Stop

(random start-stop)
5
6
Material
Bronze
Steel
Iron
Powdered Metal Bronze
Powdered Metal Iron
Aluminum
Nylon
9
10
11
12
13
14
15
16
13-24
* Frictional (drag) torque is the torque
necessary to overcome static friction. It may

be measured by a spring-scale or by deadweights, applied to a known moment arm
so gradually as to make inertia negligible. It
is that torque found just sufficient to induce
motion.
Multiplier
1.05
1.00
.92
.79
.88
.35
.17
WR2 x rpm
+ friction torque*
3700 x t
Where:
T = Torque required from wrap spring, lbf in.
WR2 = load inertia, lbf in.2
rpm = shaft speed at clutch location
t = time to engagement (.003 for clutch), sec.
In order to calculate the inertias of components

which are made of material other than steel, use the
multipliers found in the conversion chart (below) to
establish the inertias of these components.
Inertia Conversion Chart
In order to determine the inertia of a rotating member
(shaft, disc, etc.) of a material other than steel,
multiply the inertia of the appropriate steel diameter
from the chart by:
Calculate load inertia

Use the inertia chart to determine the inertia of the
application components. To determine WR2
of a given shaft or disc, multiply the WR2 from the
chart by the length of shaft or thickness of disc in
inches.
(WR2)
INERTIA OF STEEL SHAFTING

(Per Inch of Length or Thickness)
in.
WR2
lbf in.2
Dia.
in.
lbf in.2
WR2
Dia.
in.
lbf in.2
1/4
3/8
1/2
3/4
1
1-1/4
1-1/2
1-3/4
2
2-1/4
2-1/2
2-3/4
3
3-1/2
3-3/4
4
4-1/4
4-1/2
5
5-1/2
6
6-1/4
6-1/2
6-3/4
.00011
.00055
.00173
.00864
.0288
.072
.144
.288
.432
.72
1.152
1.584
2.304
4.176
5.472
7.056
9.072
11.376
17.28
25.488
36.00
42.624
49.68
57.888
7
7-1/4
7-1/2
7-3/4
8
8-1/4
8-1/2
8-3/4
9
9-1/4
9-1/2
9-3/4
10
10-1/4
10-1/2
10-3/4
11
11-1/4
11-1/2
11-3/4
12
12-1/4
12-1/2
12-3/4
66.816
77.04
87.984
100.656
113.904
128.88
144.00
162.72
182.88
203.04
223.20
252.00
277.92
306.72
338.40
371.52
407.52
444.96
486.72
529.92
576.00
626.40
679.68
735.84
13
13-1/4
13-1/2
13-3/4
14
14-1/4
14-1/2
14-3/4
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
803.52
858.24
924.48
995.04
1068.48
1147.68
1229.75
1317.60
1404.00
1815.84
2314.08
2910.24
3611.52
4433.76
5389.92
6492.96
7757.28
9195.84
10827.36
12666.24
14731.20
17036.64
19604.16
22452.48
Dia.
WR2
MAGNETIC SPRING-WRAPPED CLUTCHES

TECHNICAL DATA
R
Inch
0
PERFORMANCE PROFILE
MAGNETICALLY ACTUATED CLUTCHES

Principles of Operation:
VOLTAGE
CURRENT
TIME
LOAD
rpm
T1
T2
T3 T4
T5
CURRENT AND SPEED RESPONSE PROFILE

T1 = Time to engage (TTE) (Electrical build up and collar
movement and spring wrap time).
T2 = Time to speed (TTS).
Shaft
Flange
Clutch Operation Control

Hub
Collar
The inside diameter
of the spring
is larger than
the outside
diameter of
the shaft hub.
One end of
the spring
(control tang) is
fastened to the
control collar
De-Energized
(or armature).
When the coil is de-energized, the hubs rotate independently
of each other. The free hub (affixed to the spring), the spring,
and the collar rotate as a unit. The opposing shaft hub is not
fastened to the spring and rotates as another unit. The coil
housing is stationary and piloted on the shaft bearing. A
ground pin placed in the retaining tab secures the coil housing from rotating.
When the coil is

energized, the
control collar is
T5 T3 = Time to zero (TTZ) (Load and speed dependent).
pulled and held
against the shaft
flange. The momentary relative
motion between
spring and hubs
"wraps" the
Energized
spring, coupling
the two hubs positively. All torque is transmitted through the wrapped spring.
Magnetic force is only necessary to maintain a tight spring
grip for total torque transfer.
T4 T3 = Armature disengagement time (ADT).
CHARACTERISTICS OF DISENGAGEMENT
Control collar release time (ADT) is affected somewhat
by speed, load, and the operational performance. The
electrical circuit, however, has a major impact on the clutch
disengagement performance. Voltage transients and bleed
down time should be minimized. The optimum suppression
network for an application using the clutch is represented
by circuit C which incorporates a 1N4004 series diode

and a 12V zener. Omitting the zener (circuit B) would
result in a less expensive circuit but at the expense of
minor decrease in performance. Circuit A represents the
quickest disengagement time but provides no protection
for voltage transients.
2
3
4
5
6
7
8
9
10
12
13
B
NO SUPPRESSION
11
IN4004 SUPPRESSION
14
C
IN4004 AND 12V
ZENER SUPPRESSION
13-25
15
16
I
R
T
1
2
3
ELECTROMAGNETIC SPRING-WRAPPED CLUTCHES

VERY FAST RESPONSE
FRICTION-FREE OPERATION
UNIDIRECTIONAL INPUT
Inch
+32F to +140F (0C to +60C)
COIL DATA:
Voltage: 24V DC
Resistance: 185 10% ohms
SPECIFICATIONS:
Static Torque: 30 lbf in. (3.4 Nm)

Cycle Life: 1 x 106 @ 30 lbf in.
Power: 3.5 watts nominal
Flying Leads: 24 AWG 12 in. (30 cm) long
4
* HI-CW/SI-CCW
** HI-CCW/SI-CW
.31
(7.87)
1.10 +.15
-.05
.157 MIN.
(4)
.737 MAX.
(18.72)
3X120
8
9
1.05
(26.67)
3 X .210 .003
(5.33 0.08)
11
14
15
16
1.312 .010
(33.32 0.25)
10
13
(19.18 0.25)
.013 .013
(0.33 0.33)
(
(27.94 +3.81
-1.27
12
.755 .010
1.055 .010
(26.80 0.25)
.272 .010
(6.91 0.25)
.096 .010
(2.44 0.25)
2 X .103 .003 RAD. FULL

(2.62 0.08)
.5115 .0015
(12.99 0.038)
.945 .010
(24 0.25)
INCH COMPONENT
Catalog Number
* S90SWB13AA04
** S90SWB13AB04
* S90SWB13AA05
** S90SWB13AB05
METRIC COMPONENT
B
Bore
in. (mm)
.2505 .2530 (6.362 6.427)
.2505 .2530 (6.362 6.427)
.3130 .3185 (7.950 8.090)
.3130 .3185 (7.950 8.090)
* Hub Input (HI)CW / Shaft Input (SI)CCW

** Hub Input (HI)CCW / Shaft Input (SI)CW
13-26
Catalog Number
* S90SWBM13AA06
** S90SWBM13AB06
* S90SWBM13AA08
** S90SWBM13AB08
B
Bore
mm (in.)
6.01 6.09 (.237 .239)
6.01 6.09 (.237 .239)
8.01 8.09 (.315 .318)
8.01 8.09 (.315 .318)
ELECTROMAGNETIC SPRING-WRAPPED CLUTCHES

VERY FAST RESPONSE
FRICTION-FREE OPERATION
HIGH-TORQUE TO SIZE RATIO
UNIDIRECTIONAL INPUT
R
Inch
COIL DATA:
Voltage: 24V DC
Resistance: 93 10% ohms
Current: .257 amp.
Leads Ends Stripped: 12.0 in. (300 mm) long standard

.19/.31 in. (4.9/7.8 mm)
T
1
SPECIFICATIONS:
Static Torque: 150 lbf in. (16 Nm)

Max. Radial Bearing Load: 30 lbf (13.6 kg)
Response Time, Voltage on at Full Speed:
150 msec Max., 40 msec Nom.
Input Configuration: Hub input or shaft input
Bearing: Reinforced polyetherimide with internal lubricant
3
4
WEIGHT:
1.0 lb. (0.45 kg)
5
* HI-CW/SI-CCW
** HI-CCW/SI-CW
1.795 1.815
(45.59
46.11)
3X120
.25
(6.35)
MAX.
.297 .303 MATING
3X (7.54
7.70) LUG
.000 .032
.61
R (15.50) (0.00 0.82)
MAX.
1.495 1 .505
(37.97 38.23) B
1.74 1.76
(44.19 44.71)
1.590 1.623
(40.38 41.23)
ONE OR MORE
DOWEL PINS
SPROCKET
OR PULLEY
1.276 1.296
(32.41 32.92)
OILITE
.130 .136
BEARING
(3.30 3.46)
W/R FULL
.871 .885
(22.12 22.48)
R 1.10 1.14
(27.94 28.96)
.73 .77
(18.54 19.56)
.122 .142 EXAMPLE OF YOUR

(3.09 3.61) MATING ASSEMBLY
.189 .201
(4.80 5.11)
10
1.61 1.63
(40.89 41.41)
SLOT
11
INCH COMPONENT
Catalog Number
* S90SWA18AA06
** S90SWA18AB06
* S90SWA18AA08
** S90SWA18AB08
12
METRIC COMPONENT
B
Bore
in. (mm)
.3755 .3780 (9.54 9.60)
.3755 .3780 (9.54 9.60)
.5010 .5035 (12.73 12.79)
.5010 .5035 (12.73 12.79)
7
8
.895 .905
(22.73 22.99)
70
50
Catalog Number
* S90SWAM18AA10
** S90SWAM18AB10
* S90SWAM18AA12
** S90SWAM18AB12
B
Bore
mm (in.)
10.010 10.079 (.3941 .3968)
10.010 10.079 (.3941 .3968)
12.011 12.078 (.4729 .4755)
12.011 12.078 (.4729 .4755)
* Hub Input (HI)CW / Shaft Input (SI)CCW

** Hub Input (HI)CCW / Shaft Input (SI)CW
13
14
15
13-27
16
POWER-OFF SERVO BRAKE TECHNICAL INFORMATION

R
Inch
T
1
Power-Off Brake S90SB9- series
Used to stop or hold a load in the absence of power. The case assembly is mounted
or fastened to a bulkhead. The armature assembly is attached to the rotating load.
High-temperature insulated leadwires
Long-life brake lining (nonasbestos)
3
4
Low-inertia rotating components, allowing higher

acceleration rates
5
UL Class H insulation system,
epoxy sealed for efficient operation in
extreme environments
Spline-drive construction withstands

high impact stresses imparted by servo
systems
7
8
Through holes for internal/external/

reversible mounting flexibility
9
10
11
12
Case Assembly
Case Assembly
Armature Assembly
Armature Assembly
Prime
Mover
Load
Prime
Mover
Load
Shaft
13
Shaft Bearing
Support Required
Option 1: Single Output Shaft
14
15
16
13-28
Shaft #1
Option 2: Double Output Shaft
Shaft #2
POWER-OFF SERVO BRAKES

SIMPLE INSTALLATION
ECONOMICAL COST
ENERGY EFFICIENT
SPLINED HUB
R
Inch
COIL DATA:
Voltage: 24V DC
Other voltages available on special order.
T
1
K2
K1
12 in. MIN.
R
A G
H
THREAD X2
C BOLT CIRCLE
D (4)
MOUNTING
HOLES
Keyway Dimensions
R Bore .250 .312 .375 .500
W Width .062
H Height .286
INCH COMPONENT
Catalog Number
Static
Torque
S90SB9-15A04S
S90SB9-15A04L
S90SB9-15A05S
S90SB9-15A05L
S90SB9-15A06S
S90SB9-15A06L
S90SB9-17A04S
S90SB9-17A04L
S90SB9-17A06S
S90SB9-17A06L
S90SB9-17A08S
S90SB9-17A08L
S90SB9-19A04S
S90SB9-19A04L
S90SB9-19A06S
S90SB9-19A06L
5
5
5
5
5
5
10
10
10
10
10
10
18
18
18
18
Catalog Number
(Ref.)
S90SB9-15A...
S90SB9-17A...
S90SB9-19A...
lbf in.
Max.
watts
R
Hub
Bore
7
7
7
7
7
7
10
10
10
10
10
10
12
12
12
12
.250
.250
.312
.312
.375
.375
.250
.250
.375
.375
.500
.500
.250
.250
.375
.375
G
Case
Inside
Dia.
.53
.53
.53
.53
.53
.53
.58
.58
.58
.58
.58
.58
.43
.43
.43
.43
A
Dia.
C
Dia.
D
Dia.
1.50
1.50
1.50
1.50
1.50
1.50
1.79
1.79
1.79
1.79
1.79
1.79
2.00
2.00
2.00
2.00
1.31
1.31
1.31
1.31
1.31
1.31
1.64
1.64
1.64
1.64
1.64
1.64
1.77
1.77
1.77
1.77
.125
.125
.125
.125
.125
.125
.093
.093
.093
.093
.093
.093
.146
.146
.146
.146
Armature
Nom.
Thread Resistance Engagement Disengagement
ohms
#2-56
#6-32
#6-32
96
64
54
msec
20
20
35
* Typical torque after burnishing; units shipped burnished.
msec
10
10
10
.094
.364
.094
.425
K1
OAL
Short
Hub
1.06
1.06
1.06
1.19
1.19
1.19
1.19
1.19
.125
.564
K2
OAL
Long
Hub
1.18
1.18
1.18
1.32
1.32
1.32
1.38
1.38
Energy Weight
Rotor
Inertia Dissipation lb.
lbf in. sec2
lbf ft./min.
4.38 x 10-6
1.87 x 10-5
2.36 x 10-5
500
700
900
.3
.7
.7
6
7
8
9
10
11
12
13
14
15
13-29
16

SIMPLE INSTALLATION
ECONOMICAL COST
ENERGY EFFICIENT
SPLINED HUB
R
Inch
COIL DATA:
Voltage: 24V DC
T
1
K2
K1
2
12 in. MIN.
A G
H
THREAD 2-#8-32
C BOLT CIRCLE
D (4)
MOUNTING
HOLES
5
Keyway Dimensions
R Bore .375 .500 .625
W Width .094
H Height .425
INCH COMPONENT
Catalog Number
Static
Torque
S90SB9-28A06S
S90SB9-28A06L
S90SB9-28A08S
S90SB9-28A08L
S90SB9-28A10S
S90SB9-28A10L
80
80
80
80
80
80
Catalog Number
(Ref.)
S90SB9-28A...
lbf in.
Max.
watts
R
Hub
Bore
20
20
20
20
20
20
.375
.375
.500
.500
.625
.625
G
Case
Inside
Dia.
1.18
1.18
1.18
1.18
1.18
1.18
A
Dia.
C
Dia.
D
Dia.
3.03
3.03
3.03
3.03
3.03
3.03
2.76
2.76
2.76
2.76
2.76
2.76
.177
.177
.177
.177
.177
.177
Armature
Nom.
Thread Resistance Engagement Disengagement
ohms
#8-32
36
msec
50
msec
40
Rotor
Inertia
lbf in. sec2

1.06 x
10-4
.125
.564
K1
OAL
Short
Hub
1.22
1.22
1.22
.188
.709
K2
OAL
Long
Hub
1.45
1.45
1.45
Energy
Dissipation Weight
lb.
6
7
8
9
10
lbf ft./min.
1800
1.8
11
12
13
14
15
13-30
REV: 03.09.12 mh
16
POWER-ON FLANGE-MOUNTED BRAKES

ZERO DRAG WHEN DE-ENERGIZED
ANTI-BACKLASH WHEN ENERGIZED
R
Inch
COIL DATA:
Voltage: 24V DC
T
1
12 in. MIN.
K **
3
P A
E SQ.
C
D
4 THRU HOLES
EQ. SP. ON A C B.C.
5
Keyway Dimensions
INCH COMPONENT
Catalog Number
Bore
.250 .375 .500 .625
Width
Height
.062
.286
.094
.425
.125
.564
.188
.709
Armature
Static* Nom.
Armature Energy
P
Torque Resist. Max.
Inertia Dissipation Engagement Disengagement Bore
wattage
lbf in. sec2 lbf ft./min.
lbf in. ohms
msec
msec
128
108
75
66
66
44
5
6
8.5
9.5
9.5
15
3.4 x 10-5
8.1 x 10-5
33.1 x 10-5
81.0 x 10-5
81.0 x 10-5
179.5 x 10-5
175
420
1400
2600
2600
2900
5
10
12
15
15
18
18
27
32
35
35
45
S90BF9-11A04
S90BF9-17A04
S90BF9-22A06
S90BF9-26A06
S90BF9-26A08
S90BF9-30A10
5
15
40
80
80
125
.250
.250
.375
.375
.500
.625
Catalog Number
(Ref.)
A
Dia.
Max.
B
Dia.
C
Dia.
D
Dia.
E
Max.
G
Dia.
K **
Max.
Weight
S90BF9-11A04
S90BF9-17A04
S90BF9-22A06
S90BF9-26A06
S90BF9-26A08
S90BF9-30A10
1.25
1.78
2.26
2.63
2.63
3.27
1.498
2.436
2.873
3.499
3.499
4.186
1.31
2.13
2.50
3.13
3.13
3.75
.125
.187
.166
.187
.187
.187
1.17
1.82
2.33
2.63
2.63
3.25
.05
.06
.06
.06
.06
.09
.53
.75
.88
1.06
1.06
1.75
1.14
1.27
1.74
1.84
1.84
1.93
.2
.5
.9
1.2
1.2
3.0

** For Catalog Number:
-11A04, initial working air gap at installation shall be .004/.009.
-17A04, -22A06, -26A06, -26A08 initial working air gap at installation shall be .006/.013.
-30A10, 30A12, initial working air gap at installation shall be .008/.018.
6
7
8
9
10
lb.
11
12
13
14
15
13-31
16
POWER-OFF CAP STYLE BRAKES

BRAKES LOAD IN ABSENCE OF POWER
COIL DATA:
Inch
Voltage: 24V DC
1
2
1.140 SQ.
45
12 in. MIN.
.1875
HUB
BORE
1.265
.500 HEX
#4-40
2 PLACES
120 APART
5
6
.17
.335
.062
1.090
1.498
.48
.125
4 THRU HOLES
EQ. SP.
ON A 1.312 B.C.
Keyway Dimensions
7
8
INCH COMPONENT
Catalog Number *
S90BRC-11A03
11
12
13
14
15
16
13-32
.1875
.062
.224
Static Torque
lbf in.
Max.
wattage
Weight
oz.
10
Bore
Width
Height
POWER-OFF PARALLEL PLATE BRAKES

STOPS CRITICAL LOADS UPON POWER FAILURE PHONE: 516.328.3300 FAX: 516.326.8827 WWW.SDP-SI.COM
COIL DATA:
Inch
Voltage: 24V DC
T
1
2
45
12 in. MIN.
.78
2.250
P
HUB
BORE
3.200
.750 HEX
.02
.62
.10
.900
.177 THRU 4X EQ.

SP. ON A 2.840 B.C.
#6-32 SET SCREWS

2 PLACES 120 APART
6
Keyway Dimensions
INCH COMPONENT
Catalog Number *
S90BRP-22A04
S90BRP-22A05
S90BRP-22A06
Bore
.250 .3125 .375
Width
Height
.062
.286
.094
.364
Min. Static Torque

lbf in.
Max.
wattage
P
Hub Bore
Weight
oz.
8
8
8
8
8
8
.2500
.3125
.3750
12
12
12
.094
.425
7
8
9
10
11
12
13
14
15
13-33
16
CLUTCH APPLICATIONS
R
Inch
T
Shaft-Mounted Clutches
S90CS9 Series
1
2
FIELD
PRIME
MOVER
Flange-Mounted Clutches
S90CF9 Series
FIELD
ARMATURE
GEAR OR
PULLEY
HUB
BELT OR CHAIN
ARMATURE
GEAR OR
PULLEY
PRIME
MOVER
ROTOR
HUB
BELT OR CHAIN
ROTOR
LOAD
ANTIROTATION TAB
LOAD
5
6
7
Flange-Mounted Clutch Couplings

S90CFC Series
Shaft-Mounted Clutch Couplings

S90CSC Series
FIELD
8
9
PRIME
MOVER
LOAD
ROTOR
10
ANTIROTATION TAB
11
12
13
14
15
16
FIELD
ARMATURE
13-34
HUB
ARMATURE
PRIME
MOVER
LOAD
ROTOR
HUB
SHAFT-MOUNTED CLUTCHES
ZERO-BACKLASH ARMATURE
FOR PARALLEL LOADS
R
Inch
COIL DATA:
Voltage: 24V DC
Other voltages and dissimilar bore combinations

K **
R
B
2 SET
SCREWS
90 APART
12 in. MIN.
Catalog Number
(Ref.)
S90CS9-11A0404
S90CS9-11A0505
S90CS9-15A0404
S90CS9-15A0505
S90CS9-17A0404
S90CS9-17A0505
S90CS9-22A0505
S90CS9-26A0606
S90CS9-26A0808
S90CS9-30A1010
lbf in.
ohms
5
5
10
10
15
15
40
80
80
125
128
128
130
130
108
108
75
65
65
44
5
5
5
5
6
6
8.5
9.5
9.5
15
Static* Nom.
Torque Resist.
A
R
Bore Dia.
.2500
.3125
.2500
.3125
.2500
.3125
.3125
.3750
.5000
.6250
1.25
1.25
1.53
1.53
1.78
1.78
2.26
2.63
2.63
3.27
3
Keyway Dimensions
ROTOR
Max.
wattage
S90CS9-11A0404
S90CS9-11A0505
S90CS9-15A0404
S90CS9-15A0505
S90CS9-17A0404
S90CS9-17A0505
S90CS9-22A0505
S90CS9-26A0606
S90CS9-26A0808
S90CS9-30A1010
INCH COMPONENT
Catalog Number
ARMATURE
Bore
.250 .3125 .375 .500 .625
Width
Height
.062
.286
.094
.364
.094
.425
.125
.564
.188
.709
Armature
Armature Rotor
Energy
Inertia Inertia Dissipation Engagement Disengagement
2 lbf ft./min.
2
lbf in. sec lbf in. sec
3.5 x 10-5 2.6 x 10-5

3.5 x 10-5 2.6 x 10-5
5.9 x 10-5 5.2 x 10-5
5.9 x 10-5 5.2 x 10-5
7.3 x 10-5 11.4 x 10-5
7.3 x 10-5 11.4 x 10-5
33.4 x 10-5 32.3 x 10-5
80.0 x 10-5 62.0 x 10-5
80.0 x 10-5 62.0 x 10-5
180.0 x 10-5 203.0 x 10-5
C
Ref.
.87
.87
1.10
1.10
1.32
1.32
1.52
1.75
1.75
2.01
.56
.56
.75
.75
.91
.91
1.16
1.34
1.34
1.60
.13
.13
.19
.19
.19
.19
.19
.19
.19
.19
.38
.38
.50
.50
.50
.50
.44
.50
.50
.50
.03
.03
.06
.06
.06
.06
.06
.06
.06
.06
msec
5
5
8
8
10
10
12
15
15
18
175
175
295
295
420
420
1400
2600
2600
2900
H
K **
Max. Max.
.22
.22
.38
.38
.30
.30
.36
.34
.34
.40
1.38
1.38
1.83
1.83
1.85
1.85
2.20
2.47
2.47
2.81
L
.33
.33
.33
.33
.33
.33
.37
.47
.47
.83
msec
18
18
22
22
27
27
32
35
35
45
M Weight
Dia.
lb.
.507
.507
.631
.631
.631
.631
.756
.999
.999
1.374

-11A0404, -11A0505, initial working air gap at installation shall be .004/.009.
-15A0404, -15A0505, -17A0404, -17A0505, initial working air gap at installation shall be .004/.009.
-22A0505, -26A0606, -26A0808, initial working air gap at installation shall be .006/.013.
Keyway not available in rotor.
No knurl available; S90CS9-26A supplied with (3) #8-32 holes on a 1.375 B.C.
S90CS9-30A supplied with (3) #8-32 holes on a 1.750 B.C.
.2
.2
.4
.4
.6
.6
1.1
1.4
1.4
3.3
4
5
6
7
8
9
10
11
12
13
14
15
13-35
16
I
R
SHAFT-MOUNTED CLUTCH COUPLINGS

FOR IN-LINE LOADS
Inch
COIL DATA:
Voltage: 24V DC

1
K**
2
3
4
ARMATURE
G
B
12 in. MIN.
ROTOR
Keyway Dimensions
6
INCH COMPONENT
Catalog Number
8
9
S90CSC-11A0404
S90CSC-17A0404
S90CSC-22A0606
S90CSC-26A0606
S90CSC-26A0808
S90CSC-30A1010
S90CSC-30A1212
Static* Nom.
Torque Resist.
lbf in.
ohms
5
15
40
80
80
125
125
128
108
75
65
65
44
44
Max.
wattage
2 SET
SCREWS
90 APART
Armature
Inertia
Bore
.250 .375 .500 .625 .750
Width
Height
.062
.286
.094
.425
.125
.564
.188
.709
.188
.837
Armature
Rotor
Energy
Inertia Dissipation Engagement Disengagement
2 lbf ft./min.
lbf in. sec2 lbf in. sec
3.4 x 10-5
2.6 x 10-5
5
8.1 x 10-5 11.4 x 10-5
6
8.5 33.1 x 10-5 32.3 x 10-5
9.5 81.0 x 10-5 62.0 x 10-5
9.5 81.0 x 10-5 62.0 x 10-5
179.5 x 10-5 203.0 x 10-5
15
179.5 x 10-5 203.0 x 10-5
15
msec
18
27
32
35
35
45
45
msec
5
10
12
15
15
18
18
175
420
1400
2600
2600
2900
2900
10
11
12
13
14
Catalog Number
(Ref.)
S90CSC-11A0404
S90CSC-17A0404
S90CSC-22A0606
S90CSC-26A0606
S90CSC-26A0808
S90CSC-30A1010
S90CSC-30A1212
A
Dia.
G
Dia.
.250
.250
.375
.375
.500
.625
.750
1.25
1.78
2.26
2.63
2.63
3.27
3.27
.87
1.32
1.52
1.75
1.75
2.05
2.05
.56
.91
1.16
1.34
1.34
1.69
1.69
.13
.19
.19
.19
.19
.19
.19
.38
.50
.44
.50
.50
.50
.50
.03
.06
.06
.06
.06
.09
.09
.487
.620
.750
.875
.875
1.125
1.125
.22
.30
.36
.34
.34
.36
.36

-11A0404,17A0404, initial working air gap at installation shall be .004/.009.
- 22A0606, 26A0606, 26A0808, initial working air gap at installation shall be .006/.013.
- 30A1010, 30A1212, initial working air gap at installation shall be .008/.018.
15
16
R
Bore
13-36
K ** Weight
lb.
1.28
1.55
2.06
2.11
2.11
2.14
2.14
.2
.6
1.1
1.4
1.4
3.3
3.3
FLANGE-MOUNTED CLUTCHES
FOR PARALLEL LOADS
R
Inch
COIL DATA:
Voltage: 24V DC

T
1
K**
12 in. MIN.
T, 2 PLACES
90 APART
ARMATURE
L
M
E SQ.
R
C
OVER KNURL
F
D, 4 PLACES
EQ. SPACED
ROTOR
Keyway Dimensions
INCH COMPONENT
Catalog Number
S90CF9-11A0404
S90CF9-15A0404
S90CF9-17A0404
S90CF9-22A0606
S90CF9-26A0606
S90CF9-26A0808
Static*
Armature
Max.
Torque wattage
Inertia
5
10
15
40
80
80
5.0
5.0
6.0
8.5
9.5
9.5
3.5 x 10-5
5.9 x 10-5
7.3 x 10-5
33.4 x 10-5
80.0 x 10-5
80.0 x 10-5
.250 .375 .500
Width
Height
.062
.286
.094
.425
.125
.564
Armature
Rotor
Energy
R
2 lbf in./min.
lbf in.
Bore
2.5 x 10-5
5.0 x 10-5
11.7 x 10-5
31.7 x 10-5
64.0 x 10-5
64.0 x 10-5
175
295
420
1400
2600
2600
Catalog Number
(Ref.)
A
Dia.
B
Dia.
C
Dia.
D
Dia.
S90CF9-11A0404
S90CF9-15A0404
S90CF9-17A0404
S90CF9-22A0606
S90CF9-26A0606
S90CF9-26A0808
1.252
1.531
1.780
2.260
2.625
2.625
1.498
1.999
2.436
2.873
3.499
3.499
1.312
1.750
2.125
2.500
3.125
3.125
.125
.166
.187
.166
.187
.187
1.17
1.66
1.82
2.33
2.63
2.63
.046
.060
.060
.062
.062
.062
msec
18
22
27
32
35
35
msec
5
8
10
12
15
15
K**
M
Dia.
1.230
1.540
1.660
1.930
2.200
2.200
.33
.33
.32
.34
.47
.47
.507
.631
.631
.756
.999
.999
5
6
.250
.250
.250
.375
.375
.500
T
Weight
Set
lb.
Screws
#6-32
#6-32
#8-32
#8-32
#8-32

-15A0404, -17A0404, -22A0606, -26A0606, -26A0808, initial working air gap at installation shall be .006/.013.
No knurl available; S90CF9-26A supplied with (3) #8-32 holes on a 1.375 B.C.
.2
.4
.6
1.1
1.4
1.4
10
11
12
13
14
15
13-37
16
FLANGE-MOUNTED CLUTCH COUPLINGS

FOR IN-LINE LOADS
COIL DATA:
Inch
Voltage: 24V DC

T
1
T
2 PLACES
EACH END
90 APART
12 in. MIN.
ARMATURE
K **
3
E SQ.
M A
D THRU, 4 HOLES
EQUALLY SPACED
ON A C B.C.
ROTOR
6
Keyway Dimensions
INCH COMPONENT
Catalog Number
S90CFC-15A0404
S90CFC-17A0404
S90CFC-26A0606
S90CFC-26A0808
10
15
80
80
5
6
9.5
9.5
6.6 x 10-5
8.1 x 10-5
81.0 x 10-5
81.0 x 10-5
.250 .375 .500
Width
Height
.062
.286
.094
.425
.125
.500
Armature
Rotor
Energy
R
2 lbf ft./min.
Static*
Armature
Max.
Torque Wattage
Inertia
lbf in.
Bore
5.0 x 10-5
11.7 x 10-5
64.0 x 10-5
64.0 x 10-5
msec
8
10
15
15
295
420
2600
2600
Catalog Number
(Ref.)
A
Dia.
B
Dia.
C
Dia.
D
Dia.
K **
M
Dia.
S90CFC-15A0404
S90CFC-17A0404
S90CFC-26A0606
S90CFC-26A0808
1.531
1.780
2.625
2.625
1.999
2.436
3.499
3.499
1.750
2.125
3.125
3.125
.156
.187
.187
.187
1.56
1.82
2.63
2.63
.060
.060
.062
.062
1.380
1.350
1.840
1.840
1.000
1.060
1.720
1.720
msec
22
27
35
35
.250
.250
.375
.500
T
Weight
Set
lb.
Screws
#6-32
#6-32
#8-32
#8-32

.4
.6
1.4
1.4
7
8
9
10
11
12
13
14
15
13-38
REV: 07.03.12 mh
16
MECHANICAL SLIP CLUTCHES

R
Inch
0
These units are positive drive slip clutches which provide
accurate overload protection in many mechanical power
transmission systems. When a jam-up or excess overload occurs, these units disengage motor drives.
Instant Actuation
When load exceeds the rating determined by precision tempered torque springs, the unit's drive key pivots out of a slot
to disengage the slip clutch. Once the overload is removed
and speed reduced, the unit resets itself automatically.
Steel springs within the unit force metal slides against each
side of a hardened cast steel pawl, holding it rigid with one
end seated in a detent on the outer drive housing.
During normal machine operation, power transfers into

the central assembly through the rigidly held pawl and
then rotates the outer drive housing and the driven shaft to
which it is connected. If a jam-up or some other malfunction
causes an unacceptable load to occur, excessive torque on
the pawl overpowers the springs and the pawl rotates out of
its detent. Thus, the central assembly is disconnected from
the outer drive housing.
Once the overload is removed and speed reduced, the

torque springs automatically expand to force the pawl
back in its detent. This automatic resetting action engages
your drive shaft and puts the entire drive system back into
motion at its original angular position.
Fast, Automatic Resetting
The Actuating Pin Assembly is a simple pin which

is forced out radially from the the main body when
overload occurs. When using this option, it is important
to note that the housing or external mounting hub end
of the unit is the power source or input end. This part of
the unit must continue to rotate for the extended pin to
contact a customer-supplied limit switch for shutdown
or warning.
6
7
8
9
10
11
12
Shaft-to-Shaft Mount Slip Clutch
Through Shaft Mount Slip Clutch
13
14
15
13-39
16
I
R
THROUGH SHAFT MOUNT SLIP CLUTCHES

WITH BUSHING
OPTIONAL ACTUATING PIN
Inch
MATERIAL:
Housing - Heat-Treated 1215 Steel, Black Oxide

Bushing - Bronze
FEATURES:
1
2
3
Quick and easy installation.

Tamper resistant.
Automatic reset.
Provides overload protection in mechanical
power transmission systems.
Dependable performance in dusty, humid
and oily environments.
Other torque ratings available on special order.

Through Shaft
Mount Slip Clutch
4
5
HOW TO SELECT:
1. Note shaft diameter and
length. The shaft must
extend through the
complete unit. The drive
or driven component will
be mounted on the long
hub.
2. Determine required torque.
T
E
BRONZE
BUSHING
O.D.
OPTIONAL ACTUATING PIN:

S
W
U
The actuating pin assembly is a simple pin

which is forced out radially from the main body
when overload occurs. When using this option,
it is important to note that the housing (B* bore)
hub end of the unit is the power source or input end.
This part of the unit must continue to rotate for the
extended pin to contact a customer-supplied
limit switch for shutdown or warning.
C
B
D
B*
POWER
SOURCE
OR INPUT
END
G
L
(REF.)
9
INCH COMPONENT
10
11
12
Optional Actuating Pin
Catalog Number **
Series
(Ref.)
S9945Y-T1X...
S9945Y-T2Z...
S9945Y-T2X...
S9945Y-T3Z...
S9945Y-T3X...
.837
1.033
1.395
1.573
1.791
.125
.125
.125
.125
.125
.180
.125
.125
.125
.125
.250
.195
.240
.175
.175
** To order model with actuating pin, insert P in box at the end of the catalog number (next page).
13
14
15
16
13-40
THROUGH SHAFT MOUNT SLIP CLUTCHES CONT.

R
Inch
INCH COMPONENT
Catalog Number
D
C
B
Short Long
Bore Hub Hub
Dia. Dia.
Weight lb. 1/2

S9945Y-T1X04015
.250
.875 1.000
.250
S9945Y-T1X04020
.875 1.000
S9945Y-T1X04030
.250
.875 1.000
.375
S9945Y-T1X06015
.875 1.000
S9945Y-T1X06020
.375
.875 1.000
.375
S9945Y-T1X06030
.875 1.000
.500
S9945Y-T1X08015
.875 1.000
S9945Y-T1X08020
.500
.875 1.000
.500
S9945Y-T1X08030
.875 1.000
Weight lb. 1-1/4
.375 1.250 1.375
S9945Y-T2Z06040
.375 1.250 1.375
S9945Y-T2Z06050
S9945Y-T2Z06060
.375 1.250 1.375
.500 1.250 1.375
S9945Y-T2Z08040
.500 1.250 1.375
S9945Y-T2Z08050
.500 1.250 1.375
S9945Y-T2Z08060
.625 1.250 1.375
S9945Y-T2Z10040
.625 1.250 1.375
S9945Y-T2Z10050
S9945Y-T2Z10060
.625 1.250 1.375
Weight lb. 2-1/4
.500 1.500 1.625
S9945Y-T2X08040
.500 1.500 1.625
S9945Y-T2X08050
.500 1.500 1.625
S9945Y-T2X08060
.625 1.500 1.625
S9945Y-T2X10040
S9945Y-T2X10050
.625 1.500 1.625
.625 1.500 1.625
S9945Y-T2X10060
.750 1.500 1.625
S9945Y-T2X12040
.750 1.500 1.625
S9945Y-T2X12050
S9945Y-T2X12060
.750 1.500 1.625
Weight lb. 3-1/4
S9945Y-T3Z10120
.625 1.750 1.750
S9945Y-T3Z10250
.625 1.750 1.750
S9945Y-T3Z10350
.625 1.750 1.750
S9945Y-T3Z12120
.750 1.750 1.750
S9945Y-T3Z12250
.750 1.750 1.750
S9945Y-T3Z12300
.750 1.750 1.750
S9945Y-T3Z16120
1.000 1.750 1.750
S9945Y-T3Z16250
1.000 1.750 1.750
S9945Y-T3Z16350
1.000 1.750 1.750
Weight lb. 8
S9945Y-T3X16300
1.000 2.250 2.500
To order model without actuating pin, use catalog
number as is. For actuating pin, insert P in box at the
end of the catalog number.
F
L
O.D.
External (Ref.)
(Ref.)
Keyway
Slip
Torque
10%
lbf in.
.500
.500
.500
.500
.500
.500
.500
.500
.500
.250
.250
.250
.250
.250
.250
.250
.250
.250
1.562
1.562
1.562
1.562
1.562
1.562
1.562
1.562
1.562
1.800
1.800
1.800
1.800
1.800
1.800
1.800
1.800
1.800
.205
.205
.205
.205
.205
.205
.205
.205
.205
.600
.600
.600
.600
.600
.600
.600
.600
.600
.135
.135
.135
.135
.135
.135
.135
.135
.135
15
20
30
15
20
30
15
20
30
.625
.625
.625
.625
.625
.625
.625
.625
.625
.312
.312
.312
.312
.312
.312
.312
.312
.312
2.165
2.165
2.165
2.165
2.165
2.165
2.165
2.165
2.165
2.420
2.420
2.420
2.420
2.420
2.420
2.420
2.420
2.420
.365
.365
.365
.365
.365
.365
.365
.365
.365
.750
.750
.750
.750
.750
.750
.750
.750
.750
.235
.235
.235
.235
.235
.235
.235
.235
.235
40
50
60
40
50
60
40
50
60
.875
.875
.875
.875
.875
.875
.875
.875
.875
.375
.375
.375
.375
.375
.375
.375
.375
.375
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.950
2.950
2.950
2.950
2.950
2.950
2.950
2.950
2.950
.455
.455
.455
.455
.455
.455
.455
.455
.455
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.000
.312
.312
.312
.312
.312
.312
.312
.312
.312
40
50
60
40
50
60
40
50
60
1.062
1.062
1.062
1.062
1.062
1.062
1.062
1.062
1.062
.375
.375
.375
.375
.375
.375
.375
.375
.375
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.470
3.470
3.470
3.470
3.470
3.470
3.470
3.470
3.470
.470
.470
.470
.470
.470
.470
.470
.470
.470
1.187
1.187
1.187
1.187
1.187
1.187
1.187
1.187
1.187
.312
.312
.312
.312
.312
.312
.312
.312
.312
120
250
350
120
250
350
120
250
350
.625
3.625
4.550
.555
1.250
.420
300
1.080
NOTE: Supplied with standard keyways as follows:

.125 x .062 for .500 bores
.187 x .094 for .625 & .750 bores
.250 x .125 for 1.000 bores
For square keys.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
13-41
16
I
R
SHAFT-TO-SHAFT MOUNT SLIP CLUTCHES

COUPLING TYPE
Inch
MATERIAL:
T
1
2
Heat-Treated 1215 Steel, Black Oxide
FEATURES:
Quick and easy installation.

Tamper resistant.
Automatic reset.
Provides overload protection in mechanical
power transmission systems.
Dependable performance in dusty, humid
and oily environments.
Other torque ratings available on special order.
Shaft-to-Shaft
Mount Slip Clutch
4
5
6
7
8
HOW TO SELECT:
1. Note bore size.
2. Determine required
torque. The shaft-toshaft slip clutch
is bidirectional; therefore the input of the unit
is not important unless
equipped with an
actuating pin assembly.

S
W
U
T
F
NOTE: The actuating pin assembly is a simple pin

which is forced out radially from the main body
when overload occurs. When using this option,
it is important to note that the housing (B* bore)
end of the unit is the power source or input end. O.D.
This part of the unit must continue to rotate for
C
the extended pin to contact a customer-supplied
B
limit switch for shutdown or warning.
D POWER SOURCE
OR INPUT END
B*
K
G
L
(REF.)
INCH COMPONENT
10
11
12
13
14
15
16
Catalog Number **
Series
(Ref.)
S9946Y-1X4...
S9946Y-1X6...
S9946Y-1X8...
S9946Y-2Z6...
S9946Y-2Z8...
S9946Y-2ZA...
S9946Y-2X8...
S9946Y-2XA...
S9946Y-2XC...
S9946Y-3ZA...
S9946Y-3ZC...
S9946Y-3ZG...
S9946Y-3XG...
Optional Actuating Pin

S
.837
.837
.837
1.033
1.033
1.033
1.395
1.395
1.395
1.573
1.573
1.573
1.791
.125
.125
.125
.125
.125
.125
.125
.125
.125
.125
.125
.125
.125
.180
.180
.180
.125
.125
.125
.125
.125
.125
.125
.125
.125
.125
.250
.250
.250
.195
.195
.195
.240
.240
.240
.175
.175
.175
.175
** To order model with actuating pin, insert P in box at the end of the
catalog number (next page).
Supplied with set screws.
13-42
Keyway
.125 x .062
.125 x .062
.187 x .094
.125 x .062
.187 x .094
.187 x .094
.187 x .094
.187 x .094
.250 x .125
.250 x .125
SHAFT-TO-SHAFT MOUNT SLIP CLUTCHES CONT.

R
Inch
INCH COMPONENT
Catalog Number
D
C
B Short Long
Bore Hub Hub
Dia. Dia.
O.D.
L
(Ref.) (Ref.)
Weight 1/2 lb.

*S9946Y-1X4X4015
.250
.875 1.000 1.140
.630 1.562
*S9946Y-1X4X4020
.250
.875 1.000 1.140
.630 1.562
*S9946Y-1X4X4030
.250
.875 1.000 1.140
.630 1.562
*S9946Y-1X6X6015
.375
.875 1.000 1.140
.630 1.562
*S9946Y-1X6X6020
.375
.875 1.000 1.140
.630 1.562
*S9946Y-1X6X6030
.375
.875 1.000 1.140
.630 1.562
.500
.875 1.000 1.140
.630 1.562
S9946Y-1X8X8015
.500
.875 1.000 1.140
.630 1.562
S9946Y-1X8X8020
.500
.875 1.000 1.140
.630 1.562
S9946Y-1X8X8030
Weight 1-1/4 lb.
.375 1.250 1.375 1.540
.820 2.165
*S9946Y-2Z6X6040
*S9946Y-2Z6X6050
.375 1.250 1.375 1.540
.820 2.165
*S9946Y-2Z6X6060
.375 1.250 1.375 1.540
.820 2.165
.500 1.250 1.375 1.540
.820 2.165
S9946Y-2Z8X8040
.500 1.250 1.375 1.540
.820 2.165
S9946Y-2Z8X8050
.500 1.250 1.375 1.540
.820 2.165
S9946Y-2Z8X8060
.625 1.250 1.375 1.540
.820 2.165
S9946Y-2ZAXA040
.625 1.250 1.375 1.540
.820 2.165
S9946Y-2ZAXA050
.625 1.250 1.375 1.540
.820 2.165
S9946Y-2ZAXA060
Weight 2-1/4 lb.
.500 1.500 1.625 1.805 1.110 2.500
S9946Y-2X8X8040
.500 1.500 1.625 1.805 1.110 2.500
S9946Y-2X8X8050
.500 1.500 1.625 1.805 1.110 2.500
S9946Y-2X8X8060
.625 1.500 1.625 1.805 1.110 2.500
S9946Y-2XAXA040
.625 1.500 1.625 1.805 1.110 2.500
S9946Y-2XAXA050
.625 1.500 1.625 1.805 1.110 2.500
S9946Y-2XAXA060
.750 1.500 1.625 1.805 1.110 2.500
S9946Y-2XCXC040
.750 1.500 1.625 1.805 1.110 2.500
S9946Y-2XCXC050
.750 1.500 1.625 1.805 1.110 2.500
S9946Y-2XCXC060
Weight 3-1/4 lb.
.625 1.750 1.750 2.100 1.330 3.000
S9946Y-3ZAXA120
.625 1.750 1.750 2.100 1.330 3.000
S9946Y-3ZAXA250
.625 1.750 1.750 2.100 1.330 3.000
S9946Y-3ZAXA350
.750 1.750 1.750 2.100 1.330 3.000
S9946Y-3ZCXC120
.750 1.750 1.750 2.100 1.330 3.000
S9946Y-3ZCXC250
.750 1.750 1.750 2.100 1.330 3.000
S9946Y-3ZCXC300
1.000 1.750 1.750 2.100 1.330 3.000
S9946Y-3ZGXG120
1.000 1.750 1.750 2.100 1.330 3.000
S9946Y-3ZGXG250
1.000 1.750 1.750 2.100 1.330 3.000
S9946Y-3ZGXG350
Weight 8 lb.
1.000 2.250 2.500 3.080 1.420 3.625
S9946Y-3XGXG300
To order model without actuating pin, use catalog number as is.
For actuating pin, insert P in box at the end of the catalog number.
* Supplied with set screws. All others are supplied with keyway.
Slip
Torque
1.800
1.800
1.800
1.800
1.800
1.800
1.800
1.800
1.800
.205
.205
.205
.205
.205
.205
.205
.205
.205
.600
.600
.600
.600
.600
.600
.600
.600
.600
.135
.135
.135
.135
.135
.135
.135
.135
.135
.218
.218
.218
.218
.218
.218
.218
.218
.218
15
20
30
15
20
30
15
20
30
2.420
2.420
2.420
2.420
2.420
2.420
2.420
2.420
2.420
.365
.365
.365
.365
.365
.365
.365
.365
.365
.750
.750
.750
.750
.750
.750
.750
.750
.750
.235
.235
.235
.235
.235
.235
.235
.235
.235
.312
.312
.312
.312
.312
.312
.312
.312
.312
40
50
60
40
50
60
40
50
60
2.950
2.950
2.950
2.950
2.950
2.950
2.950
2.950
2.950
.455
.455
.455
.455
.455
.455
.455
.455
.455
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.000
.312
.312
.312
.312
.312
.312
.312
.312
.312
.312
.312
.312
.312
.312
.312
.312
.312
.312
40
50
60
40
50
60
40
50
60
3.470
3.470
3.470
3.470
3.470
3.470
3.470
3.470
3.470
.470
.470
.470
.470
.470
.470
.470
.470
.470
1.187
1.187
1.187
1.187
1.187
1.187
1.187
1.187
1.187
.312
.312
.312
.312
.312
.312
.312
.312
.312
.375
.375
.375
.375
.375
.375
.375
.375
.375
120
250
350
120
250
350
120
250
350
4.550
.555
1.250
.420
.420
300
10%
lbf in.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
13-43
16
PRECISION IN-LINE SLIP CLUTCHES

PIN TYPE
R
T
1
2
3
4
5
6
7
DES. PAT. 201,522
Inch
MATERIAL:
Housing - 303 Stainless Steel

Brake - Acetal
1
Precision
Component
TORQUE:
Adjustable to 50 ozf in. by advancing

jam nut and using second jam nut
as a locking device.
WRENCHES:
Adjustment is accomplished with 7/8 open

end wrenches (not supplied).
1-15/32
11/64
11/64
A1
A
3/4
B
.085
SUB DRILL 1
AND SET SCREW
B1
SUB DRILL 2 AND
.085 SET SCREW
JAM NUTS
INCH COMPONENT
Catalog Number
S9906A-MM7-02
S9906A-MM7-03
S9906A-MM7-04
S9906A-MM7-23
S9906A-MM7-24
A
Dia.
+.0005
-.0000
.1248
.1873
.2498
.1248
.1248
B
Dia.
.015
Sub Drill 1
&
Set Screw
.250
.312
.375
.250
.250
.029 / #2-56
.040 / #4-40
.062 / #6-32
.029 / #2-56
.029 / #2-56
A1
Dia.
+.0005
-.0000
.1248
.1873
.2498
.1873
.2498
B1
Dia.
.015
Sub Drill 2
&
Set Screw
.250
.312
.375
.312
.375
.029 / #2-56
.040 / #4-40
.062 / #6-32
.040 / #4-40
.062 / #6-32
NOTE: Swing clearance circle is 1".
CLAMP TYPE
DES. PAT. 201,522

MATERIAL:

Brake - Acetal
TORQUE:
10
11
12
13
14
15
16
Adjustable to 50 ozf in. by advancing

jam nut and using second jam nut
as a locking device.
1-15/32
11/64
11/64
A1
B
3/4
WRENCHES:
Adjustment is accomplished with 7/8 open

end wrenches (not supplied).
B1
JAM NUTS
INCH COMPONENT
Catalog Number
S9906A-MM7S-02
S9906A-MM7S-03
S9906A-MM7S-04
S9906A-MM7S-23
S9906A-MM7S-24
S9906A-MM7S-34
NOTE: Swing clearance circle is 1".
13-44
A
Dia.
+.0005
-.0000
.1248
.1873
.2498
.1248
.1248
.1873
B
Dia.
+.001
-.002
.188
.250
.313
.188
.188
.250
A1
Dia.
+.0005
-.0000
.1248
.1873
.2498
.1873
.2498
.2498
B1
Dia.
+.001
-.002
.188
.250
.313
.250
.313
.313
PRECISION SLIP CLUTCH ASSEMBLIES

PIN TYPE
MATERIAL:
Inch

Brake - Oil-Impregnated Steel
TORQUE:
1
Precision
Component
5-50 ozf in.
1-1/64
SUB DRILL
1/4
BORE
+.0000
29/32 5/8 HUB

DIA.
SET SCREW
.3746 -.0005
INCH COMPONENT
Catalog Number
+.0005
-.0000
Bore
Hub
Diameter
Set Screw
Sub Drill
S9906A-G150S-1
S9906A-G150S-2
S9906A-G150S-3
S9906A-G150S-4
.1200
.1248
.1873
.2498
.312
.312
.375
.500
#2-56
#2-56
#4-40
#6-32
.029
.029
.040
.070
5
6
NOTE: Use with Hubless Gears of .125 F.W. and .3750 bore.
7
CLAMP TYPE
MATERIAL:
TORQUE:

Brake - Oil-Impregnated Steel
5-50 ozf in.
9/64
31/64
10
BORE
29/32 5/8 .265
11
.875
.3746 +.0000
-.0005
12
INCH COMPONENT
Bore
Catalog Number
+.0005
-.0000
S9906A-G150-1
S9906A-G150-2
S9906A-G150-3
S9906A-G150-4
.1200
.1248
.1873
.2498
13
14
15
13-45
16
STANDARD SLIP CLUTCH ASSEMBLIES

PIN TYPE
R
T
1
MATERIAL:
Inch

Brake - Cork
Precision
Component
Fig. 1: 5-50 ozf in.

Fig. 2: 5-30 ozf in.
SET SCREW
1 HUB
DIA.
BORE
5/8 HUB
DIA.
+.0000
.3746 -.0005
SUB DRILL
SUB DRILL
1/4
1/4
1-1/64
SET SCREW
BORE
TORQUE:
Fig. 1
+.0000
.3746 -.0005
1-1/64
Fig. 2
INCH COMPONENT
Catalog Number
Bore
Hub
Diameter
Set Screw
Sub Drill
.312
.375
.500
#2-56
#4-40
#6-32
.029
.040
.070
Figure 1
Figure 2
+.0005
-.0000
S9906A-MM2-02
S9906A-MM2-03
S9906A-MM2-04
S9906A-MM4-02
S9906A-MM4-03
S9906A-MM4-04
.1248
.1873
.2498
CLAMP TYPE
MATERIAL:

Brake - Cork
TORQUE:
10
Fig. 1 & Fig. 2: 5-50 ozf in.
1/4
14
15
16
.875
1
.3746 +.0000
-.0005
12
BORE
BORE
1 O.D.
11
13
FOR CLAMPS
SEE INDEX
.3746 +.0000
-.0005
1-1/64
1-1/64
Fig. 1
Fig. 2
INCH COMPONENT
Catalog Number
Bore
Figure 1
Figure 2
+.0005
-.0000
S9906A-MM1-02
S9906A-MM1-03
S9906A-MM1-04
S9906A-MM3-02
S9906A-MM3-03
S9906A-MM3-04
.1248
.1873
.2498
NOTES: 1. Use with Hubless Gears of .125 F.W. and 3.750 bore.
2. Figure 2 Clearance Diameter - 15/16
13-46
O.D.
+.000
-.003
.188
.250
.312
MAGNETIC PARTICLE CLUTCHES & BRAKES

FEATURES:
Magnetic engagement without movement of

mechanical parts.
Smooth and silent.
No backlash.
Nearly linear torque vs. current.
No friction surface to wear out.
Ultrafast response.
Low output inertia.
High torque-to-size ratio.
Infinitely adjustable torque.
R
Inch
APPLICATIONS:
Tensioning
Stepping and Indexing
Overload Protection
Motor Testing
Controlled Start / Stop

HOUSING (INPUT SHAFT

ON CLUTCHES, FIXED ON
BRAKE)
COIL
MAGNETIC
FLUX LINES
HOW THE UNITS WORK:
The output disk/shaft assembly does not touch the housing.

The gap in between is filled with a fine, dry stainless steel
powder. The powder is free flowing, until a magnetic field is
applied from the stationary coil. The powder particles form
chains along the magnetic field lines, linking the disk to the
housing. The torque is proportional to the magnetic field and,
therefore, to the applied D.C. input current. Output torque is
controlled by varying the D.C. input current. The torque vs.
current curve is essentially linear, with a slight "S" shape.
5
MAGNETIC
PARTICLES
IN GAP
PERCENT RATED TORQUE
TORQUE vs. CURRENT
When the input torque is increased, the brake or clutch

will slip smoothly at the torque level set by the coil input
current. Output torque is independent of slip rpm.
3
4
OUTPUT DISK/SHAFT ASSEMBLY
While the input torque is less than the output torque, the
brake or clutch won't slip. For brakes, the output shaft
won't rotate. For clutches, the input shaft will be coupled
to the output shaft, with no slip.
100
STANDARD COILS
6, 12, 24, 90
VOLTS D.C.
80
60
40
ANY VOLTAGE
AVAILABLE
20
0
20
40
60
10
80 100
PERCENT RATED CURRENT (D.C.)
11
NOTE: See Accessories and Power Supplies on page 13-50 thru 13-53.
12
13
14
15
13-47
16
I
R
MAGNETIC PARTICLE CLUTCHES

ULTRAFAST RESPONSES
SOFT OR FAST START
Inch
COIL DATA:
T
1
2
3
4
Voltage: 24V DC
APPLICATIONS:
Tensioning
Overload protection
Torque limiting drives
Controlled starts (and stops with
a separate brake)
.125
.125
.050
The shaft becomes coupled to the output

shaft with electrical excitation.
Clamp *
All shafts have flat at the end.
.093
J
(TYP)
12 in. LEADS
#22 AWG
8
9
10
11
12
13
14
15
16
.062
B INPUT
1.312 +.000
(TYP) -.001
INPUT *
D
C
(TYP)
6
7
.250
.375
OUTPUT B
Voltages other than 24 Volts DC

H
F
E
.135
.129
View A
INCH COMPONENT
B
Shaft
O.D.
Catalog Number
.0002
C
Dia.
D
Dia.
E
Nom.
.03
.02
.02
+.000
-.001
.01
.015
* S90MPA-C14D19A
.1872
1.437
1.434
2.88
1.66
.59
.63
* .750
*.60
S90MPA-C23D31
.3122
2.250
4.40
2.50
1.07
.83
1.125
.08
S90MPA-C28D37
.3745
2.850
5.07
2.80
1.27
1.00
1.125
.09
S90MPA-C34D50
.4995
3.380
5.53
3.38
1.08
1.08
1.375
.08
S90MPA-C45D75
**.7495
4.500
6.50
3.67
1.46
1.37
1.625
.13
S90MPA-C52D75
**.7495
5.200
6.61
3.67
1.46
1.48
2.000
.13
K
3 #3-48
1.140 B.C.
2x3 #6-32
2.031 B.C.
2x3 #8-32
2.000 B.C.
2x4 #10-32
3.000 B.C.
2x4 #10-32
4.228 B.C.
2x4 1/4-20
4.812 B.C.
* For input side see View A, threaded mount holes K are at output end only. This assembly is supplied with housing
solder terminals with leads attached and with 3 mounting clamps for #4-40 screws on 1.72 B.C.
** Shaft has 3/16 Keyway at 90 from flat (both ends)
C Tolerance +.000 / -.002
Catalog Number
(Ref.)
S90MPA-C14D19A
S90MPA-C23D31
S90MPA-C28D37
S90MPA-C34D50
S90MPA-C45D75
S90MPA-C52D75
13-48
Torque
Range
Elect.
Power
.06 2
.12 5
.4 15
.6 35
1 70
4 130
3
5
6
10
14
15
lbf in.
watts
Mech.
Max. Unforced
Max.
Heat
Overhung Response Weight
Speed Dissipation
Load
lb.
msec.
lbf in. sec2 rpm
watts
lbf
Shaft
Inertia
26 x 10-7
13 x 10-6
33 x 10-6
15 x 10-5
66 x 10-5
15 x 10-4
2000
2000
1400
1000
1000
1000
6
10
20
30
50
80
4
20
35
50
80
80
9
18
25
70
90
130
.7
3.0
5.0
9.0
17.0
22.0
MAGNETIC PARTICLE BRAKES

ZERO BACKLASH
LOW INERTIA
NO FRICTION SURFACE
R
Inch
COIL DATA:
Voltage: 24V DC
Voltages other than 24 Volts DC available on special order.
APPLICATIONS:
Tensioning
Controlled stops
Positioning
Locking
Motor testing
B
(TYP) G
All models are available with the shaft on one end, on special order.
B
Dia.
+.001 .0002
-.000
C
Dia.
D
Dia.
.015
.01
.03
.02
.02
.01
+.000
-.001
S90MPA-B11D12S
Solid
.1247
.437
1.05
2.50
.88
.81
.81
.06
S90MPA-B15D19S
Solid
.1872
.687
1.56
2.70
1.06
.81
.81
.06
S90MPA-B21D25S
Solid
.2496
.750
2.09
3.05
1.15
.94
.94
.06
S90MPA-B25D37S
Solid
.3746
1.186
2.47
3.56
1.37
1.09
1.09
.08
K
* 6 ea. #1-72
on .906 B.C.
* 3 ea. #6-32
on 1.350 B.C.
3 ea. #6-32
on 1.350 B.C.
3 ea. #6-32
on 2.203 B.C.
3 ea. #6-32
on 2.000 B.C.
4 ea. #10-32
on 3.000 B.C.
4 ea. #10-32
on 4.228 B.C.
4 ea. #10-32
on 4.228 B.C.
4 ea. 1/4-20
on 4.812 B.C.
1.09
.08
1.09
1.37
3.56
2.87
1.125
Solid .3746
S90MPA-B28D37S
.27
.08
1.37
.47
2.87
2.10
1.125
.375 .4980
S90MPA-B28D37H38
1.12
.09
1.12
1.47
3.37
3.72
1.125
Solid .4995
S90MPA-B34D50S
.25
.09
.47
1.47
2.20
3.37
1.125
.375 .4980
S90MPA-B34D50H38
** S90MPA-B45D75S
.33
.11
1.42
3.53
1.77
4.50
1.875
Solid .7495
.33
.11
.52
2.63
1.77
1.875
4.50
.501 .7480
S90MPA-B45D75H50
.33
.11
1.41
1.77
3.53
4.71
1.875
Solid .7495
S90MPA-B47D75S
.52
.33
.11
1.77
2.63
4.71
1.875
.501 .7480
S90MPA-B47D75H50
1.53
.22
.13
2.17
5.23
3.92
Solid .7495 1.625
S90MPA-B52D75S
.82
.26
.09
2.17
3.25
5.23
3.187
.750 .9060
S90MPA-B52D75H75
* One side only 3.187 on H side ** 3/16 keyway & flat, 90 oriented in respect to the keyway on the end of the shaft.
Supplied with housing solder terminals with leads attached.
Catalog Number
(Ref.)
Torque
Range
Elect.
Power
S90MPA-B11D12S
S90MPA-B15D19S
S90MPA-B21D25S
S90MPA-B25D37S
S90MPA-B28D37S
S90MPA-B28D37H38
S90MPA-B34D50S
S90MPA-B34D50H38
S90MPA-B45D75S
S90MPA-B45D75H50
S90MPA-B47D75S
S90MPA-B47D75H50
S90MPA-B52D75S
S90MPA-B52D75H75
.006 .3
.04 1
.08 2.5
.3 6
.3 15
.3 15
.6 35
.6 35
1 60
1 60
2.5 115
2.5 115
3 150
3 150
1.5
2
3
4.5
6
6
9
9
8
8
13
13
13
13
lbf in.
watts
Mech.
Max. Unforced
Max.
Heat
Overhung Response Weight
Speed Dissipation
Load
lb.
msec.
lbf in. sec2 rpm
watts
lbf
Shaft
Inertia
16 x 10-8
11 x 10-7
55 x 10-7
23 x 10-6
34 x 10-6
34 x 10-6
12 x 10-5
12 x 10-5
45 x 10-5
45 x 10-5
61 x 10-5
61 x 10-5
15 x 10-4
15 x 10-4
3500
3000
2500
2000
2000
2000
1800
1800
1800
1800
1800
1800
1300
1300
2
3.5
8
15
20
20
30
30
50
50
55
55
80
80
H
F
INCH COMPONENT
A
Dia.
A
D
The shaft becomes coupled to the housing with electrical

excitation. The torque is proportional to the DC input current.
Catalog Number
12 in. LEADS
#22 AWG
J
C (TYP)
(TYP)
.7
4.0
5.0
25.0
25.0
25.0
50.0
50.0
100.0
100.0
120.0
120.0
120.0
120.0
6
8
9
20
25
25
35
35
85
85
90
90
130
130
13-49
.2
.6
1.0
1.5
2.5
2.5
4.0
4.0
7.0
7.0
8.0
8.0
12.0
12.0
5
6
7
8
9
10
11
12
13
14
15
16
ENCLOSED POWER SUPPLY

COIL DATA:
Voltage: 24V DC
SPECIFICATIONS:
T
1
2
3
Inch
Output Voltage: 0 24V DC

Output Power: 22 watts
Input Voltage: 110V AC, 50...60 Hz
Maximum Input Current: 0 10V, 5mA
Input Resistance: 0 10V, 2000 ohms
DESCRIPTION:
1
2
3
4
5
6
Percent Rated Current Potentiometer.

MAX. SPAN - Potentiometer, sets the 100 percent output current.
POWER ON LIGHT.
MIN. SPAN - Potentiometer sets the zero output current.
LIQUID CRYSTAL DIGITAL AMMETER: 3-1/2 digits - current in mA
TERMINAL STRIP FOR - DC output, Ground, 0 10 Volt input signal,
Follower Arm Potentiometer.
7 AC INPUT, AC POWER ON/OFF SWITCH - Input Fuse 1 amp.
4
5
6
CONTROL
INPUT
COIL OUT PUT

+
0 10V COM
FOLLOWER POT
+
GREEN
7
8
COIL
+
CONSTANT CURRENT
POWER SUPPLY
FRONT
10
11
0 10V
SIDE VIEW
The power supply is suitable for all magnetic particle

brakes & clutches. The power supply is a constant
current type, with a 3/4 turn potentiometer for setting
output current from 0 to 100%.
REAR VIEW
The output current can also be controlled with a 0 10

Volt input signal. The SPAN adjustments set maximum and
minimum current levels.
12
INCH COMPONENT
13
14
Catalog Number
For Use With
S90MPS-24MC
0 10 Volt input signal &

Follower Arm Potentiometer
15
16
13-50
NOTES:
12V DC output is available on special order.
110V AC input is standard.
220V AC input is available on special order.
OPEN POWER SUPPLY

COIL DATA:
Voltage: 24V DC
SPECIFICATIONS:
Inch
Output Voltage: 0 24V DC

Output Power: 22 watts
Input Voltage: 110V AC, 50...60 Hz
Maximum Input Current: 0 10V, 5mA
Input Resistance: 0 10V, 2000 ohms
DESCRIPTION:
1 SWITCH - To select the method of controlling the output current:

Position (1) The percent Rated Current Potentiometer;
Position (2) The 0 10V DC Input signal.
2 MAX. SPAN - Potentiometer, sets the 100 percent output current.
3 MIN. SPAN - Potentiometer, sets the zero output current.
4 INPUT CONNECTOR - AC input and ground (earth) - see right.
5 OUTPUT CONNECTOR - For brakes & clutches, 0 10 volt input.
6 AMMETER CONNECTOR - For (optional) L.C.D. ammeter.
7 OUTPUT FUSE - 2 amp, 5 x 20 mm
8 12 or 24 VOLT SELECTOR SWITCH - Slide the switch towards 12 when
using a 12 volt brake or clutch. Slide towards 24 when using a 24
volt unit.
9 REMOTE SWITCH - To select the On-board Span Max. Potentiometer
or a Remote Span Max. Potentiometer
10 REMOTE CONNECTOR - For a Remote Span Max. Potentiometer
(for tension adjustments when using the Follower Arm Potentiometer).
2
4 INPUT CONNECTOR
GROUND
230 VOLTS AC
230V
or 110 VOLTS AC
110V 0 VOLTS
0
5 OUTPUT CONNECTOR
0 10 VOLT CONTROL
BRAKE
OR CLUTCH
0-10 VOLT
SIGNAL
(0v 10+)
N
.43
RemoteSW2
SW3
12
5.9
CW
ORANGE
12
24
2.92
7
8
AMMETER
BRAKE OR
CLUTCH
WHITE
YELLOW
SW1
(for set up only)
NO CONNECTION
10
1.0
- +
D.C.
OUT
MANUAL (Potentiometer) CONTROL
% RATED
CURRENT
POTENTIOMETER
AMMETER
5 OUTPUT CONNECTOR
6
7
NO CONNECTION
7-7/8
(0v 10+)
IN
- +
D.C.
OUT
(for set up only)
10
11
6.96
Top View
12
INCH COMPONENT
Catalog Number
Description
S90MPS-24
S90MPS-24M
Without Ammeter
With Ammeter
13
NOTES:
12V DC output is available on special order.
110V AC input is standard.
220/230V input is available on special order.
14
15
13-51
16
FOLLOWER ARM POTENTIOMETER

DESCRIPTION:
R
T
1
2
3

MAINTAIN CONSTANT TENSION - The follower arm potentiometer is used to maintain
constant tension when using a brake for producing unwind (payout) tension, or when
using a clutch for rewind tension.
Inch
APPLICATION:
The arm rides on the roll, measuring the roll diameter. As the roll size decreases, the arm
moves downward, rotating the potentiometer shaft. The power supply current automatically
decreases, which decreases the brake (or clutch) torque to maintain constant tension.
SPECIFICATIONS:
Resistance: 500
Electrical Angle: 65
Mechanical Angle: 360 (No Stops)
Maximum Drag Torque: 4 ozf in.
1.750 B.C.
BOTH ENDS
4-5/8
1-1/2
1-3/8
1/2
2- 5/8
.062
4
1-3/8 2-1/16
+.0000
.3750 -.0005
#6-32 THREAD
3 HOLES EQ. SPACED,
BOTH ENDS
6 FOOT CABLE
1-5/8
1/2
CLAMP & ARM

(INCLUDED)
3/4
5/16
12
.375
9
10
POWER
SUPPLY
FOLLOWER ARM
POTENTIOMETER
11
BRAKE
12
110/220
VOLTS AC
13
14
15
16
INCH COMPONENT
Catalog Number
Supplied With
S90MPF-126
Shaft Clamp, 12 in. Arm &

6 ft. Cable Included
13-52
NOTE:
Connects to Sterling Instrument power supplies.
To order power supply shown above, use
Catalog Number: S90MPS-24MCF.
ULTRASONIC SENSOR
DESCRIPTION:

MAINTAIN CONSTANT TENSION - The Ultrasonic Sensor is used for maintaining constant
tension when using a brake for producing unwind (payout) tension, or when using a clutch
for rewind tension. When the target is within range, the LED Status Indicator glows continuously.
Inch
MATERIAL:
Housing - Polyester
VOLTAGE:
R
T
1
24V DC
+14F to +140F (-10C to 60C)
APPLICATION:
The sensor measures the diameter of the roll and sends a 0 10V DC signal to the power supply. Torque is automatically
varied as roll size changes, to keep tension constant. The sensor measures distances by sending an ultrasonic pulse of
sound, and then measuring the time for the return echo pulse.
SPECIFICATIONS:
Power Input: 15 30V DC, 35 mA Max.

* Range: 3.9 39.3 in.
Output Resolution: 0 10V DC
Repeatability: .02 (0.5 mm)
Resolution: .012 (0.3 mm)
4
5
* Dual range, push button

Push button adjustable end points & slope.
Push Button
2.56
.173 (TYP)
.50
SET
.73
.196
6.5 FT.
CABLE
1.18
LED STATUS
INDICATOR
ULTRASONIC
TRANSDUCER
FACE
1.48
.177
.787
3.9 Min.
POWER
SUPPLY
110/220
VOLTS AC
10
47 in. MAX.
11
BRAKE (for unwinding)

or
CLUTCH (for rewinding)
INCH COMPONENT
12
13
14
Catalog Number
15
S90MPU-BIP67
13-53
16
I
R
T
1
2
3
MAGNETIC CLUTCHES & CLUTCH BRAKES BU-ORD SIZE 11

PAT. #3,272,290
DOUBLE END
BALL BEARINGS
A & B SHAFTS COUPLED WHEN ENERGIZED
B SHAFT BRAKED WHEN DE-ENERGIZED
Inch
1
Precision
Component
SPECIFICATIONS (At 24 to 28V DC):
Breakaway Torque (Energized): .15 ozf in.

Breakaway Torque (De-Energized): .05 ozf in.
Inertia (De-Energized): .013 oz. in.2
Inertia (Energized): .029 oz. in.2
Max. Backlash (Engaged) Friction Types: 5 arc min.
Max. Backlash (Engaged) Crown Tooth Types: 10 arc min.
Power Consumption at 24V DC: 3.5 watts
WEIGHT:
4.5 oz. (TYPICAL)
4
#4-40 UNC-2B TAP
X 1/8 DP. 4 HOLES EQUALLY
SPACED ON A .812 B.C.
1.0000
.9995
1.062
32
.6250
.6245
11
9/16
3/16
1-3/8
INCH COMPONENT
Catalog Number
Coupling
Type
Output Torque
ozf in.
Brake
Type
Brake Torque
S9011A-T509
S9011A-T515
S9011A-T516
S9011A-T517
Friction
Crown Tooth
Friction
Crown Tooth
24
70
18
70
Friction
Friction
8
8
12
13
14
15
16
19/32
.062
.1250
.1245
10
1-45/64
.050
.093
.062
.062
13-54
ozf in.
REVERSE-ACTING BRAKES BU-ORD SIZE 11

PAT. #3,272,290
SINGLE END
BALL BEARINGS
R
Inch
SPECIFICATIONS (AT 24 TO 28V DC):
Breakaway Torque (Energized): .05 ozf in. (REVERSE)

Breakaway Torque (De-Energized): .05 ozf in. (MAGNETIC)
Max. Backlash (Engaged) Friction Types: 5 arc min.
Max. Backlash (Engaged) Crown Tooth Types: 10 arc min.
T
1
WEIGHT:
4.5 oz. (TYPICAL)
3
4
#4-40 UNC-2B TAP X 1/8 DP.
ON A .812 B.C.
1.0000
.9995
1.062
.050
.093
.062
.062
1-41/64
32
.6250
.6245
15/32
3/16
1-3/8
.2500
.2495
INCH COMPONENT
Catalog Number
S9011A-T523
S9011A-T525
S9011A-T528
S9011A-T529
Coupling
Type
Brake Torque
ozf in.
Braked
When
Friction
Crown Tooth
Friction
Crown Tooth
20
70
16
70
Energized
Energized
De-Energized
De-Energized
Power
Consumption
At 24V DC
watts
3.5
3.5
3.5
6.0
9
Inertia
oz. in.2
.012
.012
.024
.024
10
11
12
13
14
15
13-55
16
I
R
T
1
2
CLUTCHES & CLUTCH BRAKES BU-ORD SIZE 18

PAT. #3,272,290
DOUBLE END
BALL BEARINGS
Inch
1
Precision
Component

Max. Backlash (Engaged): 5 arc min.
Power Consumption At 24V DC: 3.2 watts
WEIGHT:
13 oz. (TYPICAL)
3
#4-40 UNC-2B TAP X 1/4 DP.
ON A 1.250 B.C.
1.5620
1.5615
1.750
.078
.093
.132
.040
61/64
1-15/16
.040
6
7
8
9
10
61/64
1-7/16
3/16
.2500
.2495
INCH COMPONENT
Catalog Number
Coupling
Type
Output
Torque
Brake
Type
Brake
Torque
S9018A-T500
S9018A-T503
S9018A-T501
S9018A-T504
Friction
Crown Tooth
Friction
Crown Tooth
50
100
50
100
Friction
Friction
16
16
11
12
13
14
15
16
.9375
.9370
18
13-56
ozf in.
ozf in.
Inertia
Inertia
De-Energized Energized
oz. in.2
oz. in.2
.041
.041
.071
.071
.076
.076
.105
.105
CLUTCHES & CLUTCH BRAKES BU-ORD SIZE 18

PAT. #3,272,290
DUPLEX END
BALL BEARINGS
R
Inch
1
Precision
Component
T
1

WEIGHT:
13 oz. (TYPICAL)
3
#4-40 UNC-2B TAP X 1/4 DP.
ON A 1.250 B.C.
1.5620
1.5615
1.750
.078
.093
.132
.040
.9375
.9370
.1250
.1245
4
.040
1-15/16
6
18
.2500
.2495
9/16
1/2
1-7/16
3/16
7
8
INCH COMPONENT
Catalog Number
Coupling
Type
S9018A-T502
S9018A-T521
S9018A-T506
S9018A-T524
Friction
Crown Tooth
Friction
Crown Tooth
Output
Torque
ozf in.
50
100
50
100
Brake
Type
Friction
Friction
Brake
Torque
ozf in.
16
16
Inertia
Inertia
oz. in.2
oz. in.2
.038
.038
.071
.071
.072
.072
.105
.105
9
10
11
12
13
14
15
13-57
16
I
R
T
REVERSE-ACTING CLUTCHES & CLUTCH BRAKES SIZE 18

PAT. #3,272,290
DUPLEX END
Inch
BALL BEARINGS
A & B SHAFTS COUPLED WHEN DE-ENERGIZED
0
1
B SHAFT BRAKED WHEN ENERGIZED
Precision
Component
1
2

WEIGHT:
13 oz. (TYPICAL)
3
#4-40 UNC-2B TAP X 1/4 DP.
ON A 1.250 B.C.
1.5620
1.5615
1.750
4
5
.078
.093
.132
.040
.9375
.9370
.1250
.1245
.040
1-15/16
6
18
7
8
9
10
9/16
1/2
3/8
3/16
INCH COMPONENT
Catalog Number
Coupling
Type
S9018A-T560
S9018A-T561
S9018A-T562
S9018A-T563
Friction
Crown Tooth
Friction
Crown Tooth
11
12
13
14
15
16
.2500
.2495
13-58
Output
Torque
ozf in.
50
100
30
60
Brake
Type
Friction
Friction
Brake
Torque
ozf in.
30
30
Inertia
Inertia
oz. in.2
oz. in.2
.134
.134
.101
.101
.103
.103
.071
.071

PAT. #3,272,290
SINGLE END
BALL BEARINGS
R
Inch
1
Precision
Component

T
1
WEIGHT:
13 oz. (TYPICAL)
2
3
#4-40 UNC-2B TAP X 1/4 DP.
ON A 1.250 B.C.
1.5620
1.5615
1.750
.078
.093
.132
.040
1-15/16
.040
5
6
.9375
.9370
18
9/16
3/16
3/8
.2500
.2495
7
8
INCH COMPONENT
Catalog Number
Brake
Type
S9018A-T564
S9018A-T565
S9018A-T566
S9018A-T567
Friction
Crown Tooth
Friction
Crown Tooth
Brake
Torque
ozf in.
50
100
20
40
Braked
When
Inertia
Energized
Energized
De-Energized
De-Energized
.042
.042
.075
.075
oz. in.2
9
10
11
12
13
14
15
13-59
16
I
R
T
1

PAT. #3,272,290
SINGLE END
BALL BEARINGS
Inch
1
Precision
Component

WEIGHT:
13 oz. (TYPICAL)
3
#4-40 UNC-2B TAP X 1/4 DP.
ON A 1.250 B.C.
1.5620
1.5615
1.750
.078
.093
.132
.040
1-15/16
.040
6
7
8
9
10
9/16
3/16
3/8
.2500
.2495
INCH COMPONENT
Catalog Number
Brake
Type
S9018A-T564
S9018A-T565
S9018A-T566
S9018A-T567
Friction
Crown Tooth
Friction
Crown Tooth
11
12
13
14
15
16
.9375
.9370
18
13-60
Brake
Torque
ozf in.
50
100
20
40
Braked
When
Inertia
Energized
Energized
De-Energized
De-Energized
.042
.042
.075
.075
oz. in.2
14 - GEARMOTORS
R
OFFSET STEPPER
GEARMOTORS
Voltage
17
23
35V DC
35V DC
NEMA Size
HYBRID STEPPER
GEARMOTORS
NEMA Size
11
14
17
23
23
34
34
42
D.C.
GEARMOTORS
Size
20
20
20
Max.
Max.
Gear Ratios Cont. Torque Step Angle Input Speed
0
rpm
ozf in.
5:1, 10:1, 18:1

5:1, 10:1, 18:1
160
320
1.8
1.8
1000
1000
Inch
Page
14-2
14-3
Min.
Holding Torque
Step Angle
Page
24V DC
80V DC
80V DC
80V DC
160V DC
160V DC
160V DC
160V DC
7 15
8 26
17 62.8
54.2 264
69 212
850 1845
150 636
1125 1591
1.8
1.8
.9 & 1.8
1.8
1.8
1.8
1.8
1.8
14-7
14-9
14-11
14-13
14-15
14-17
14-19
14-21
Voltage
Rated
Torque
No Load Speed
rpm
Page
3V DC
6V DC
12V DC
.2 32
.2 32
.2 32
.5 115
.5 115
.5 115
14-23
14-23
14-23
Max. Drive
Voltage
ozf in.
ozf in.
Technical Notes:
Stepper Motor Specifications - pg. 14-5
Hybrid Stepper Motors, NEMA Size 11 - pg. 14-6
Hybrid Stepper Motors, NEMA Size 23 - pgs. 14-12 & 14-14
Hybrid Stepper Motors, NEMA Size 34 - pgs. 14-16 & 14-18
Wiring Configuration - pg. 14-22
T
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
14-1
16
I
R
T
1
OFFSET STEPPER GEARMOTORS NEMA SIZE 17

1.8 NOMINAL MOTOR STEP ANGLE
5:1, 10:1, 18:1 GEAR RATIOS
LIGHT-DUTY
Inch
MATERIAL:
Gearhead Housing - Ryton (Engineering Resin), Black

Mounting Flanges - Ryton (Engineering Resin), Black
Bearings - Composite Bushings
-40F to +255F
2.86 MAX.
.98
1.88
SPECIFICATIONS:
3
4
5
6

Axial: 4 lbf
Shaft Play Max. - Radial: .002
Axial: .010
Gearhead Max. Cont. Torque: 160 ozf in.
Phase Resistance: 3.3 ohms 10% @ 25C
Winding Inductance: 3 mH 20%
Rated Current: 1.25 Amp. / Phase
.19
.12
24 AWG
8 LEADS
L=12" MIN.
.79
ORANGE
PULLOUT
TORQUE
(ozf in.)
PM
ORG/WHT
A-
11
12
13
14
15
B+
RED/
WHT B-
PULLOUT
TORQUE
(ozf in.)
Bipolar Chopper Drive
Switching Sequence for CW

Rotation Facing Mounting End
Step
A+
A-
B+
B-
0
1
2
3
4
+
+
+
+
+
-
+
+
+
+
+
-
5:1Ratio
12
Gearmotor- rev. per sec.
Full Steps/Second x 1000
Catalog Number
Gear
Ratio
S9117C-S18GM005
S9117C-S18GM010
S9117C-S18GM018
5:1
10:1
18:1
375
300
225
150
75
0
10:1Ratio
1.5
4.5
10
12
600
INCH COMPONENT
14-2
180
160
120
80
40
0
YELLOW
YEL/
WHT
Step Angle is 1.8 per step.
16
M3 X 0.5 THREAD
(BRASS INSERT) (4X)
1.725 B.C.
BLACK
RED
10
.710
.708
SPEED vs. TORQUE CHARACTERISTICS

Drive Setting 35V DC - 1.25 Amps per phase
13 oz.
BLK/WHT
1.65 SQ.
.31
SCHEMATIC
2.05
.470 (2X)
.22 (2X)
90 Apart
WEIGHT:
A+
.2500
.2495
Torque Rating
ozf in.
Cont.
See
Curve
Maximum
Inertia
2
Holding ozf in. sec.
222
444
799
2.67 x 10-5
1.82 x 10-6
2.97 x 10-4
PULLOUT
TORQUE
(ozf in.)
18:1Ratio
400
200
0
0
0
3.6
7.2

3
10.8
OFFSET STEPPER GEARMOTORS NEMA SIZE 23

1.8 NOMINAL MOTOR STEP ANGLE
5:1, 10:1, 18:1 GEAR RATIOS
LIGHT-DUTY
R
Inch
MATERIAL:
Gearhead Housing - Ryton (Engineering Resin), Black

Mounting Flanges - Ryton (Engineering Resin), Black
Bearings - Composite Bushings
T
1
-40F to +255F
4.70 MAX.
SPECIFICATIONS:
22 AWG
6 LEADS
L=12" MIN.

Axial: 15 lbf
Shaft Play Max. - Radial: .002
Axial: .010
Gearhead Max. Cont. Torque: 320 ozf in.
Phase Resistance: .37 ohms 10% @ 25C
Winding Inductance: .6 mH 20%
Rated Current: 4.70 Amp. / Phase
1.67
2.25 SQ.
.39
3.03
.710
.708
.20
.205 (4X)
THRU FLANGE
2.625 B.C.
1.26
SPEED vs. TORQUE CHARACTERISTICS

Drive Setting 35V DC - 3.3 Amps per phase
45 oz.
SCHEMATIC
ORANGE
PULLOUT
TORQUE
(ozf in.)
BLK/WHT
PM
800
600
400
200
0
ORG/WHT
A-
3.05
.500
.29
WEIGHT:
A+
.19
.3125
.3120
3
4
5
6
7
5:1Ratio
0 2 4 6 8 10 12 14 16
BLACK
RED
B+
YELLOW
YEL/
WHT
RED/
WHT B-
PULLOUT
TORQUE
(ozf in.)
Bipolar Chopper Drive
Switching Sequence for CW

Rotation Facing Mounting End
Step
A+
A-
B+
B-
0
1
2
3
4
+
+
+
+
+
-
+
+
+
+
+
-
S9123C-S18GM005
S9123C-S18GM010
S9123C-S18GM018
Gear
Ratio
5:1
10:1
18:1
10
0 1 2 3 4 5 6 7 8
11
PULLOUT
TORQUE
(ozf in.)
Torque Rating
ozf in.
Cont.
See
Curve
Maximum
Inertia
2
Holding ozf in. sec.
500
1000
1800
10-5
1.471 x
9.570 x 10-6
1.986 x 10-5
2400
2000
1600
1200
800
400
0
10:1Ratio
INCH COMPONENT
Catalog Number
1500
1250
1000
750
500
250
0
12
16
18:1Ratio
0 .5 1 1.5 2 2.5 3 3.5 4

3.6
7.2
12
13
14
10.8 14.4
15
Step Angle is 1.8 per step.
14-3
16

R
Inch
T
1
2
3
4
5
6
7
8
9

B
lbm ft.2
lbf ft. s2
or
lbm in.2
slugft.2
lbf in. s2
ozm in.2
ozf in. s2
kg cm.2 kgf cm. s2
g cm.2
gf cm. s2
lbm ft.2
3.108 x
10-2
144
.373
2.304 x
103
5.968
421.40
0.4297
4.214 x
105
429.71
lbf ft. s2
32.174
4.633 x
103
12
7.413 x
104
192
1.356 x
104
13.825
1.356 x
107
1.383 x
104
lbm in.2
6.944 x
10-3
2.158 x
10-4
2.590 x
10-3
16
4.144 x
10-2
2.926
2.984 x
10-3
2.926 x
103
2.984
lbf in. s2
2.681
8.333 x
10-2
386.1
6.177 x
103
16
1.130 x
103
1.152
1.130 x
106
1.152 x
103
ozm in.2
4.34 x
10-4
1.349 x
10-5
6.25 x
10-2
1.619 x
10-4
2.59 x
10-3
0.183
1.865 x
10-4
182.901
0.186
ozf in. s2
0.168
5.208 x
10-3
24.13
6.25 x
10-2
386.088
70.616
7.201 x
10-2
7.0616 x
104
72.008
kg cm.2
2.373 x
10-3
7.376 x
10-5
0.3417
8.851 x
10-4
5.467
1.416 x
10-2
1.0197 x
10-3
1000
1.0197
kgf cm. s2
2.327
7.233 x
10-2
335.109
0.8679
5.362 x
103
13.887
980.665
9.807 x
105
1000
g cm.2
2.373 x
10-6
7.376 x
10-8
3.417 x
10-4
8.851 x
10-7
5.467 x
10-3
1.416 x
10-5
10-3
1.0197 x
10-6
1.0197 x
10-3
gf cm. s2
2.327 x
10-3
7.233 x
10-5
0.3351
8.680 x
10-4
5.362
1.389 x
10-2
.9807
10-3
980.667
NOTE: To convert from A to B multiply by entry in table.
Example: Convert a rotor inertia of 90 g cm.2 to ozf in. sec2
The multiplier from the table above is 1.416 x 10-5

The new inertia = 90 x 1.416 x 10-5 = 1.27 x 103 ozf in. sec2
10
11
12
13
14
15
16
14-4
STEPPER MOTOR TECHNICAL SPECIFICATIONS

STANDARD DESIGN FEATURES
R
Inch
Mechanical, Electrical and Environmental Specifications

SIZE
11
SIZE
17
SIZE
HT17
SIZE
23
SIZE
HT23
SIZE
34
SIZE
HT34
SIZE
42
Shaft Run-Out mm (inches)

0.025
0.013
0.013
(.001)
(.0005)
(.0005)
Radial Play mm / N (inch / lbf)
0.013
(.0005)
0.025
(.001)
0.051
(.002)
0.051
(.002)
0.051
(.002)
0.051
(.002)
0.02 max.
@ 4.45 N
0.025 max.
@ 4.45 N
0.025 max.
@ 4.45 N
0.025 max.
@ 4.45 N
0.025 max.
@ 4.89 N
0.025 max.
@ 22.24 N
0.025 max.
@ 4.89 N
SIZE
14
0.01 max.
@ 4.45 N
0.025 max.
@ 19.57 N
max.
.0008 max.
.001 max.
.001 max.
.001 max.
.0004 max.
.001 max.
.001 max.
.001 max.
( .001
@ 1.1 lbf ) ( @ 1 lbf ) ( @ 4.4 lbf ) ( @ 1 lbf ) ( @ 1 lbf ) ( @ 1 lbf ) ( @ 1 lbf ) ( @ 1.1 lbf ) ( @ 5 lbf )
End Play mm / N (inch / lbf)

0.076 max.
@ 9.79 N
0.01 max.
@ 8.9 N
0.025 max.
@ 29.36 N
0.076 max.
@ 9.79 N
0.025 max.
@ 40.03 N
0.076 max.
@ 9.79 N
0.025 max.
@ 66.72 N
0.076 max.
@ 9.79 N
0.025 max.
@ 66.72 N
max.
.0004 max.
.001 max.
.003 max.
.001 max.
.003 max.
.001 max.
.003 max.
.001 max.
( .003
@ 2.2 lbf ) ( @ 2 lbf ) ( @ 6.6 lbf ) ( @ 2.2 lbf ) ( @ 9 lbf ) ( @ 2.2 lbf ) ( @ 15 lbf ) ( @ 2.2 lbf ) ( @ 15 lbf )
Perpendicularity mm (inches)
0.051
0.076
0.076
(.002)
(.003)
(.003)
Concentricity mm (inches)
0.051
0.051
0.051
(.002)
(.002)
(.002)
Operating Temperature Range
-20C to
40C
(-4F to
104F)
-20C to
50C
(-4F to
122F)
0.076
(.003)
0.076
(.003)
0.076
(.003)
0.076
(.003)
0.076
(.003)
0.076
(.003)
0.051
(.002)
0.051
(.002)
0.076
(.003)
0.051
(.002)
0.076
(.003)
0.076
(.003)
-20C to
50C
(-4F to
122F)
-20C to
50C
(-4F to
122F)
-20C to
50C
(-4F to
122F)
-20C to
50C
(-4F to
122F)
-20C to
50C
(-4F to
122F)
-70C to
40C
(-94F to
104F)
-10C to
40C
(14F to
104F)
130C
(266F)
Class B
130C
(266F)
Class B
130C
(266F)
Class B
130C
(266F)
Class B
130C
(266F)
Class B
130C
(266F)
Class B
130C
(266F)
Class B
26 AWG
26 AWG
26 AWG
22 AWG
18 AWG
22 AWG
22.24
(5)
22.24
(5)
66.72
(15)
66.72
(15)
111.21
(25)
427.03
(96)
111.21
(25)
13.34
(3)
13.34
(3)
111.21
(25)
111.21
(25)
222.41
(50)
800.68
(180)
222.41
(50)
Insulation Class
130C
(266F)
Class B
130C
(266F)
Class B
Lead Wire Gauge

26 AWG
26 AWG
Max. Radial Load N (lbf)

4.89
22.24
(1.1)
(5)
Max. Thrust Load N (lbf)
9.79
(2.2)
DESIGN TIPS:
13.34
(3)
MOTOR INSTALLATION TIPS:
Series-connect lead wires for best torque at low speeds.

Mount the motor securely against a surface
Center tap to end or parallel-connect lead wires for best torque
with good thermal conductivity such as
at higher speeds.
aluminum.
Keep motor case temperature below 100C. This can be achieved
Properly align the motor with the load using a
by lowering the motor current or limiting the duty cycle.
flexible coupling.
Allow sufficient time to accelerate load.
Protect the motor shaft from excessive thrust,
Size motor with 100% safety factor for required torque and speed.
overhung and shock loads.
Do not disassemble motors. A significant reduction in motor
performance will result.
Do not machine shafts without consulting Sterling Instrument.
Do not disconnect motor from drive while in operation.
Do not use holding torque/detent torque of motor as fail-safe brake.
14-5
3
4
5
6
7
8
9
10
11
12
13
14
15
16
HYBRID STEPPER MOTORS NEMA SIZE 11

R
Inch
WIRING DIAGRAM
1
2
A+
RED
A-
BLUE
B+ YELLOW
B- WHITE
4
LEAD
MOTOR
STEP TABLE
STEP
RED
BLUE
YELLOW
WHITE
0
1
2
3
4
+
+
+
+
+
+
+
+
NOTE: If wire configuration is setup step 0-4, shaft will turn cw (facing mounting end).
If setup step 4-0, shaft will turn ccw (facing mounting end).
TORQUE (ozf in.)
5
6
7
8
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
S9111M-D13
S9111M-S13
1.4 amps Peak Current

1 amp Peak Current
0
5
10
15
Revolutions per Second
0
1
2
3
Full Step X 103 per Second
9
10
TORQUE (ozf in.)
11
12
13
14
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
14-6
20
25
30
35
40
45
50
10
S9111M-D19
S9111M-S19

1 amp Peak Current
0
5
10
15
0
1
2
3
15
16
4 Lead Wire Configuration - Bipolar Drive
20
25
30
35
40
45
50
10

1.8 STEP ANGLE
SINGLE AND DOUBLE-ENDED SHAFTS
R
Inch
VOLTAGE:
24V DC Max. Drive
SPECIFICATION:
Leads - 4 (see previous page)

Optimized for microstepping
T
1
2
3
4
5
L
.06 .008
.787 0.2
.866 +.000
-.001
7.8 in. MIN.
.1968 +.0000
-.0005
2 x .91 .008
.394 .04
2 x 1.10 .012
.02 x 45
(4) M2.6 x .45
.118 MIN.
S9111M-D13
S9111M-S13
S9111M-D19
S9111M-S19
7
8
9
INCH COMPONENT
Catalog Number *
Motor
Conn.
Bipolar
Bipolar
Bipolar
Bipolar
1.32
1.32
1.87
1.87
Min. Phase
Phase
Phase
Rotor Weight
Holding Current
Resistance Voltage
Inertia lb.
Torque amps Inductance
V DC
mH 20% ohms 10%
oz. in.2
ozf in.
7.0
7.0
15.0
15.0
1.0
1.0
1.0
1.0
1.4
1.4
2.6
2.6
1.4
1.4
2.0
2.0
1.4
1.4
2.0
2.0
.044
.044
.098
.098
* Catalog Numbers with D in the suffix have double shafts; S in the suffix denotes single shaft.
.26
.26
.39
.39
10
11
12
13
14
15
14-7
16

R
Inch
T
1
4 Lead Wire Configuration - Bipolar Drive

WIRING DIAGRAM
A+
RED
A-
BLUE
4
LEAD
MOTOR
STEP TABLE
STEP
RED
BLUE
YELLOW
WHITE
0
1
2
3
4
+
+
+
+
+
+
+
+
B+ YELLOW
NOTE: If wire configuration is setup step 0-4, shaft will turn cw (facing mounting end).
If setup step 4-0, shaft will turn ccw (facing mounting end).
B-
WHITE
10
TORQUE (ozf in.)
4
5
6
9
8
7
6
5
4
3
2
1
S9114M-D10
S9114M-S10
.49 amps Peak Current

.35 amps Peak Current
0
10
15
20
25
30
35
40
45
50
10
TORQUE (ozf in.)
10
11
12
13
14
25
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
S9114M-D16
S9114M-S16

1 amp Peak Current
0
10
15
20
25
30
35
40
45
50
10
15
16
14-8

1.8 STEP ANGLE
SINGLE- OR DOUBLE-ENDED SHAFTS
VOLTAGE:
Inch
80VDC Max. Drive
SPECIFICATIONS:
Leads - 4 (see previous page)

1
2
3
4
L
.059 .004
12 in. MIN.
26 AWG
.559 .019
1.024 SQ.
+.0000
.1968 -.0004
(TYP)
2 x .25 +.00
-.03
.39
2 x #4-40
HOLES
1.38 SQ.
5
6
7
.866 +.000
-.001
2 x #4-40
STUDS
8
9
INCH COMPONENT
Catalog Number *
Motor
Conn.
S9114M-D10
S9114M-S10
S9114M-D16
S9114M-S16
Bipolar
Bipolar
Bipolar
Bipolar
1.00
1.00
1.57
1.57
Min. Phase Winding Winding Phase Rotor

Holding Current Inductance Resistance Voltage Inertia Weight
Torque amps mH 20% ohms 10% VDC oz. in.2 lb.
ozf in.
8
8
26
26
.35
.35
1.00
1.00
7.5
7.5
5.5
5.5
8.3
8.3
4.3
4.3
3.0
3.0
4.3
4.3
.051
.051
.109
.109
.33
.33
.47
.47
10
11
12
13
14
15
14-9
REV: 0703.12 mh
16
I
R

MAXIMUM THEORETICAL TORQUE CURVES
DRIVE SETTING 80V DC
40
Inch
S9117MD13HT
S9117MS13HT
TORQUE (ozf in.)
30
1
2
Series Connection
20
.7 amp Peak Current

Parallel Connection
10
0
5
10
15
20
2
4
1
3
0
25
30
35
40
45
50
10
45
S9117MD15HT
S9117MS15HT
40
35
TORQUE (ozf in.)
6
7
30
25
Series Connection
20
.8 amp Peak Current
15
Parallel Connection
10
10
0
5
10
15
20
2
4
1
3
0
30
35
40
45
50
10
70
11
S9117MD18HT
S9117MS18HT
60
TORQUE (ozf in.)
12
13
50
40
Series Connection
30
.8 amp Peak Current
20
Parallel Connection
14
10
15
16
25
14-10
0
5
10
15
20
25
30
35
40
45
50
10

.9 & 1.8 STEP ANGLES
R
Inch
VOLTAGE:
80V DC Max. Drive
SPECIFICATION:
Leads - 8 (see wiring diagram page)

Catalog Number S9117MMS15 is a 4 lead motor.
1.54
T
1
.94
2
.866 1.22
.1968
1.65
SQ.
4 x #4-40
.17 DEEP
Fig. 1
.59
12 in. MIN.
.080
4 x #4 - 40
.17 DEEP
MOUNTING
END
.59 .01
+.0000
.1968 -.0004
(TYP)
1.220 SQ.
1.65 SQ.
.866 +.000
-.001
FLAT
.177 .006
.177 .006
FLAT
.79 .02
Fig. 2
28
Torque Full-Step
(ozf in.) Current 0.8A/Phase
Supply Voltage 24V DC
14
S9117MMS15
Motor
Conn.
Fig. 1
Fig. 2
S9117MMS15
S9117M-D13HT
S9117M-S13HT
S9117M-D15HT
S9117M-S15HT
S9117M-D18HT
S9117M-S18HT
10
5
10
Full Step per Sec x 1000
INCH COMPONENT
Catalog Number *
Min.
Phase
Phase
Phase
Rotor
Weight
Holding Step
Voltage
L
Current Inductance Resistance
Inertia
lb.
Torque Angle
V DC
amps mH 20% ohms 10%
oz. in.2
ozf in.
Parallel 1.54
17.0
.9
1.40
4.6
2.4
3.4
.13
.55
Series
Parallel
Unipolar
Series
Parallel
Unipolar
Series
Parallel
Unipolar
31.4
31.4
22.2
51.0
51.0
36.1
62.8
62.8
44.4
1.8
1.8
1.8
1.8
1.8
1.8
1.8
1.8
1.8
.67
1.34
.95
.85
1.70
1.20
.85
1.70
1.20
11.2
2.8
2.8
14.4
3.6
3.6
12.0
3.0
3.0
8.4
2.1
4.2
6.6
1.7
3.3
6.6
1.7
3.3
5.7
2.8
4.0
5.7
2.8
4.0
5.7
2.8
4.0
.19
.19
.19
.29
.29
.29
.37
.37
.37
.44
.44
.44
.57
.57
.57
.73
.73
.73
1.30
1.30
1.30
1.54
1.54
1.54
1.85
1.85
1.85
Fig. 1 only available with a single shaft.
14-11
11
12
13
14
15
16
I
R

TORQUE (ozf in.)
T
1
2
3
150
140
130
120
110
100
90
80
70
60
50
40
30
20
10
0
TORQUE (ozf in.)
6
7
8
9
Parallel Connection
25
30
35
40
45
50
10
230
220
210
200
190
180
170
160
150
140
130
120
110
100
90
80
70
60
50
40
30
20
10
0
S9123MS30HT
S9123MD30HT
Series Connection
.7 amp Peak Current
Parallel Connection
0
5
10
15
0
1
2
3
10
Series Connection
0
15
20
5
10
0
3
2
4
1
Inch
S9123MS21HT
S9123MD21HT
20
25
30
35
40
45
50
10
250
11
225
S9123MS30HTA
S9123MD30HTA
200
12
TORQUE (ozf in.)
175
13
14
150
125
100
75
50
Series Connection
Parallel Connection
25
15
16
14-12
0
5
10
15
20
2
4
1
3
0
25
30
35
40
45
50
10

1.8 STEP ANGLE
R
Inch
VOLTAGE:
80V DC Max. Drive
SPECIFICATION:

70
S9123MS15HT
S9123MD15HT
60
TORQUE (ozf in.)
50
40
30
20
Series Connection
.7 amp Peak Current
10
Parallel Connection
3
4
0
0
5
10
15
20
25
0
1
2
3
4
5
30
35
40
45
50
10
5
6
18 in. MIN.
L
.197
.063 .008
.59 .01
.59 .01
4 x .205 +.01
-.00
1.50 .001
MOUNTING
END
.928
1.856 SQ.
+.000
.250 -.001
(TYP)
.787 .020
.630 .039
Catalog Number *
S9123M-D15HT
S9123M-S15HT
S9123M-D21HT
S9123M-S21HT
S9123M-D30HT
S9123M-S30HT
S9123M-D30HTA
S9123M-S30HTA
10
2.22 SQ.
Motor
Conn.
Series
Parallel
Unipolar
Series
Parallel
Unipolar
Series
Parallel
Unipolar
Series
Parallel
Unipolar
1.54
1.54
1.54
2.13
2.13
2.13
2.99
2.99
2.99
2.99
2.99
2.99
Min. Phase
Phase
Phase
Rotor Weight
Holding Current
Resistance Voltage
Inertia lb.
V DC
mH 20% ohms 10%
oz. in.2
ozf in.
76.6
76.6
54.2
177.0
177.0
125.0
264.0
264.0
187.0
264.0
264.0
187.0
.71
1.41
1.00
1.41
2.83
2.00
.71
1.41
1.00
2.12
4.24
3.00
21.6
5.4
5.4
10.0
2.5
2.5
56.0
14.0
14.0
6.4
1.6
1.6
8
9
.228 .006
FLAT
INCH COMPONENT
10.4
2.6
5.2
3.6
.9
1.8
16.4
4.1
8.2
2.0
.5
1.0
7.4
3.7
5.2
5.1
2.5
3.6
11.6
5.8
8.2
4.2
2.1
3.0
.66
.66
.66
1.64
1.64
1.64
2.62
2.62
2.62
2.62
2.62
2.62
1.00
1.00
1.00
1.54
1.54
1.54
2.20
2.20
2.20
2.20
2.20
2.20
11
12
13
14
15
14-13
16
I
R

Inch
100
T
TORQUE (ozf in.)
80
1
2
70
60
Series Connection
50
1 amp Peak Current
40
30
Parallel Connection
20
2 amps Peak Current
10
TORQUE (ozf in.)
5
6
7
8
140
130
120
110
100
90
80
70
60
50
40
30
20
10
0
0
5
10
15
20
0
1
2
3
4
3
25
30
35
40
45
50
10
S9123MS30
S9123MD30
Series Connection
Parallel Connection
15
20
0
5
10
0
1
2
3
4
3
25
30
35
40
45
50
10
220
10
200
S9123MS40
S9123MD40
180
160
TORQUE (ozf in.)
11
12
140
120
100
Series Connection
80
60
13
Parallel Connection
40
20
14
15
16
S9123MS20
S9123MD20
90
15
20
0
5
10
25
30
35
40
45
50
10
2
3
14-14

1.8 STEP ANGLE
R
Inch
VOLTAGE:
160V DC Max. Drive
SPECIFICATION:

T
1
2
3
.81 .03
.190
.75
2.22 SQ.
1.856 SQ.
.06
5
6
.2500 +.0000
-.0005
4 x .205 .01
1.5 .002
18 in. MIN.
7
8
9
INCH COMPONENT
Catalog Number *
S9123M-D20
S9123M-S20
S9123M-D30
S9123M-S30
S9123M-D40
S9123M-S40
Motor
Conn.
Series
Parallel
Unipolar
Series
Parallel
Unipolar
Series
Parallel
Unipolar
2
2
2
3
3
3
4
4
4
Min.
Phase
Phase
Phase
Rotor Weight
Holding Current
Resistance Voltage
Inertia lb.
V DC
mH 20% ohms 10%
oz. in.2
ozf in.
74.9
74.9
69.0
141.0
141.0
100.0
212.0
212.0
150.0
.99
1.98
1.40
1.26
2.52
1.78
1.75
3.29
2.47
17.2
4.3
4.3
18.8
4.7
4.7
16.8
4.2
4.2
5.00
1.30
2.50
4.60
1.20
2.30
3.30
.80
1.63
4.9
2.5
3.5
5.9
3.0
4.2
5.7
2.8
4.0
.55
.55
.55
1.14
1.14
1.14
1.72
1.72
1.72
1.17
1.17
1.17
2.00
2.00
2.00
2.80
2.80
2.80
10
11
12
13
14
15
14-15
16
I
R

TORQUE (ozf in.)
T
1
2
3
220
200
180
160
140
120
100
80
60
40
20
0
Inch
S9134MS25
S9134MD25
Series Connection
Parallel Connection
0 5 10 15 20 25
4
5
3
0 1 2
30
35
40
45
50
10
TORQUE (ozf in.)
5
6
7
8
525
500
475
450
425
400
375
350
325
300
275
250
225
200
175
150
125
100
75
50
25
0
S9134MS37
S9134MD37
Series Connection
Parallel Connection
7 amps Peak Current
0
10
15
20
25
30
35
40
45
50
10
10
TORQUE (ozf in.)
11
12
13
14
15
16
14-16
500
475
450
425
400
375
350
325
300
275
250
225
200
175
150
125
100
75
50
25
0
S9134MS51
S9134MD51
Series Connection
Parallel Connection
0
5
10
15
0
1
2
3
20
25
30
35
40
45
50
10

1.8 STEP ANGLE
VOLTAGE:
Inch
160V DC Max. Drive
SPECIFICATION:

T
1
2
3
L
1.19 .04
1.19 .03
2 x 3.26
MAX.
.19
4 x .216 .01
MOUNTING
END
3.38 MAX.
2 x 2.74
.3750 +.0000
-.0005
(TYP)
.063
7
18 in. MIN.
2.875 .002
8
9
INCH COMPONENT
Catalog Number *
S9134M-D25
S9134M-S25
S9134M-D37
S9134M-S37
S9134M-D51
S9134M-S51
Motor
Conn.
Series
Parallel
Unipolar
Series
Parallel
Unipolar
Series
Parallel
Unipolar
2.5
2.5
2.5
3.7
3.7
3.7
5.1
5.1
5.1
Min. Phase
Phase
Phase
Rotor Weight
Holding Current
Resistance Voltage
Inertia lb.
V DC
mH 20% ohms 10%
oz. in.2
ozf in.
212
212
150
424
424
300
636
636
450
2.42
4.84
3.42
3.24
7.07
5.00
4.17
8.34
5.90
10.0
2.5
2.5
11.6
2.9
2.9
10.4
2.6
2.6
1.3
.3
.6
1.0
.3
.5
.8
.2
.4
3.0
1.5
2.1
3.5
1.8
2.5
3.5
1.8
2.5
3.66
3.66
3.66
6.72
6.72
6.72
10.20
10.20
10.20
3.0
3.0
3.0
5.4
5.4
5.4
7.7
7.7
7.7
10
11
12
13
14
15
14-17
16
I
R

Inch
1000
800
700
TORQUE (ozf in.)
S9134MS60HT
S9134MD60HT
900
1
2
1100
600
500
400
Series Connection
300
200
Parallel Connection
100
0

0
5
10
15
0
1
2
3
20
25
30
35
40
45
50
10
6
1400
S9134MD75HT
1300
1200
1100
1000
10
900
TORQUE (ozf in.)
11
800
700
600
500
400
12
Series Connection
300
200
13
Parallel Connection
100
0
14

0
0
10
15
20
25
30
35
40
45
50
10
15
16
14-18

1.8 STEP ANGLE
HEAVY-DUTY
R
Inch
VOLTAGE:
160V DC Max. Drive
SPECIFICATION:
T
1

2
.2-.4
2.875 .002
18 in. MIN.
1.12 .06
.218 THRU HOLES
ON 2.740 SQ.
4 PLACES
L
MAX.
.330
.062
+.0000
.3750 +.0000
-.0005
.875
1.250
3.38
INCH COMPONENT
Catalog Number *
S9134M-D60HT
S9134M-S60HT
S9134M-D75HT
D -.0005
Motor
Conn.
Series
Parallel
Unipolar
Series
Parallel
Unipolar
Min.
Holding
Torque
ozf in.
1200
1200
850
1845
1845
1305
Phase
Phase
Phase
Current Inductance Resistance
amps
mH 20%
ohms 10%
4.1
8.1
5.7
4.5
9.0
6.3
10.3
2.6
2.6
13.6
3.4
3.4
1.03
.26
.52
1.06
.26
1.53
Voltage
V DC
4.2
2.1
2.9
4.8
2.3
9.6
Rotor
Inertia
oz. in.2
14.6
14.6
14.6
21.9
21.9
21.9
Catalog Number
(Ref.)
D
Dia.
L
Max.
Weight
S9134M-D60HT
S9134M-S60HT
S9134M-D75HT
.5000
.5000
.6250
.1250
.1250
.1875
.555
.555
.705
4.65
4.65
6.17
8.4
8.4
11.9
8
9
10
11
12
13
14
15
14-19
16

R
Inch
2
3
TORQUE (ozf in.)
4
5
1500
1400
1300
1200
1100
1000
900
800
700
600
500
400
300
200
100
0
S9142MD51A
S9142MS51A
Series Connection
Parallel Connection
5
15
10
0
1
0
2
3
Full Step x 103 per Second
20
25
30
35
40
45
50
10
1200
1100
S9142MD51
S9142MS51
1000
Series Connection
900
11
12
13
TORQUE (ozf in.)
10
800
Parallel Connection
700
600
500
400
300
200
100
0
14
15
16
10
15
20
25
30
35
40
45
50
22
33
44
55
66
77
88
99
10

Full Step x 103 per Second
14-20

1.8 STEP ANGLE
R
Inch
VOLTAGE:
160V DC Max. Drive
SPECIFICATION:

T
1
2
3
SHAFT KEYWAY DETAIL
MOUNTING
SURFACE
.69
+.001
.1248 -.000
.509 .009
+.005
.135 -.000
.063
#404 WOODRUFF KEYWAY

KEY SUPPLIED WITH MOTOR
1.25 .08
1.38 .05
5.1
1/2 - 14
NPT
2.186
.32
.002
+.001
.1248 -.000
4.20 SQ.
MAX.
8
MOUNTING END
9
+.0000
.5000 -.0005
.062
+.0000
.6248 -.0006
10
3.50 SQ.
.28 .01
4 HOLES
4.26 MAX.
11
INCH COMPONENT
Catalog Number *
S9142M-D51A
S9142M-S51A
S9142M-D51
S9142M-S51
Motor
Conn.
Series
Parallel
Unipolar
Series
Parallel
Unipolar
Min.
Holding
Torque
ozf in.
1591
1591
1125
1591
1591
1125
Phase
Phase
Phase
Rotor Weight
Current Inductance Resistance Voltage
Inertia lb.
V DC
amps
mH 20%
ohms 10%
6.70
13.40
9.50
3.32
6.65
4.70
7.6
1.9
1.9
35.2
8.8
8.8
.60
.10
.28
2.00
.50
1.00
12
oz. in.2
3.8
1.9
2.7
6.6
3.3
4.7
49.2
49.2
49.2
49.2
49.2
49.2
18.3
18.3
18.3
18.3
18.3
18.3
13
14
15
14-21
16
WIRING CONFIGURATION
R
Inch
T
8 Lead Wire Configuration
Unipolar Drive
WIRING DIAGRAM
Orange
STEP TABLE
2
3
4
5
6
Step Orange Black

0
1
2
3
4
ON
OFF
OFF
ON
ON
Org/Wht
Red
Yellow
ON
ON
OFF
OFF
ON
OFF
OFF
ON
ON
OFF
ON
ON
OFF
OFF
8
9
8
LEAD
MOTOR
Blk/Wht
Black
Red
Red/Wht
Yel/Wht
OFF
Yellow
Connect orange/white,black/white, red/white, and yellow/white

to plus (+) voltage.
UNIPOLAR DRIVE ONLY!

Bipolar Drive / Parallel Connected
WIRING DIAGRAM
A+
STEP TABLE
Blk/Wht
Step
A+
A-
B+
B-
0
1
2
3
4
+
+
+
+
+
+
+
+
Orange
8
LEAD
MOTOR
Org/Wht
A-
Black
Red
B+ Yel/
Wht
Yellow
Red/Wht B-
10
11

Bipolar Drive / Series Connected
A+
STEP TABLE
12
13
14
15
16
Step Orange Black

0
1
2
3
4
+
+
+
+
Orange
Org/Wht
Red
Yellow
+
+
+
+
Note: If wire configuration is setup step 04, shaft will turn cw

(facing mounting end). If setup step 40, shaft will turn ccw
(facing mounting end).
14-22
WIRING DIAGRAM
Blk/Wht
AB+
Black
Red
Red/Wht
Yel/Wht
B-
Yellow
8
LEAD
MOTOR
D.C. GEARMOTORS
LOW VOLTAGE
REVERSIBLE
SELF-STARTING
R
Inch
MATERIAL:
Housing - Molded Plastic

Shaft - Steel
SPECIFICATIONS:
No Load Drain Approx:

10 mA @ 3V
8 mA @ 6V

4 mA @ 12V
3V
6V & 12V
.125
1-13/16
2 HOLES .130 FOR

MOUNTING
33/64
.014
FLAT
.125
2-1/16
1-7/64
1-13/16
3/8
3/8
.50
FLAT
5
11/16
3/16
2-27/32
SEE NOTE
INCH COMPONENT
A
A
A
A
A
A
A
A
A
A
A
A
A
3Z16-0005A
3Z16-0010A
3Z16-0015A
3Z16-0020A
3Z16-0040A
3Z16-0050A
3Z16-0070A
3Z16-0085A
3Z16-0160A
3Z16-0200A
3Z16-0250A
3Z16-0300A
3Z16-1150A
A
A
A
A
A
A
A
A
A
A
A
A
A
3Z16-0005B
3Z16-0010B
3Z16-0015B
3Z16-0020B
3Z16-0040B
3Z16-0050B
3Z16-0070B
3Z16-0085B
3Z16-0160B
3Z16-0200B
3Z16-0250B
3Z16-0300B
3Z16-1150B
12 Volts
A
A
A
A
A
A
A
A
A
A
A
A
A
6
7
Catalog Number
6 Volts
2-51/64
1-1/32
3 Volts
3Z16-0005C
3Z16-0010C
3Z16-0015C
3Z16-0020C
3Z16-0040C
3Z16-0050C
3Z16-0070C
3Z16-0085C
3Z16-0160C
3Z16-0200C
3Z16-0250C
3Z16-0300C
3Z16-1150C
No
Load
rpm
Gear
Ratio
.5
1.0
1.5
2.0
4.0
5.0
7.0
8.5
16.0
20.0
25.0
30.0
115.0
4300:1
1740:1
1075:1
845:1
435:1
342:1
269:1
211:1
109:1
86:1
67:1
53:1
16:1
Stall
Torque
Rated
Torque
90.0
65.0
40.0
31.0
18.0
14.0
12.0
10.0
5.0
3.2
2.8
2.4
.8
32.0
25.0
16.0
12.0
6.0
5.0
4.0
3.0
1.5
1.0
.9
.7
.2
ozf in.
ozf in.
NOTE: 3 Volt gearmotors supplied with twist-on clip for two "D" size batteries (not included). Direction of rotation
clockwise facing shaft. Opposite rotation available on special order.
8
9
10
11
12
13
14
15
14-23
16
15 - MISCELLANEOUS COMPONENTS
R
Inch
T
1
Precision Geneva Mechanisms

4 & 5 Points
pg. 15-3
Precision Geneva Mechanisms

6 & 8 Points
pg. 15-4
Electromechanical Limit Stops

pg. 15-5
Ratchets and Pawls

48, 32 & 24 Pitch pg. 15-6
Standard Differentials
96 Pitch
pg. 15-7
Hollow Shaft Differentials

96 & 64 Pitch
pg. 15-8
Solid Shaft Differentials

96 & 64 Pitch pg. 15-9
72, 64 & 48 Pitch pg. 15-10
Anti-Backlash Differentials
72 Pitch
pg. 15-11
64 Pitch
pg. 15-11
Single End Flexi-Hinge

pg. 15-15
Double End Flexi-Hinge

pg. 15-16
Precision Cam Assemblies

pg. 15-17
Adjustable Cams
pg. 15-18
Molded Cams
With Metal Insert pg. 15-19
Molded Cams
pg. 15-20
Shallow Head Cam Followers

pg. 15-21
Standard Head Cam Followers

pg. 15-21
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Technical Data:
Flexi-Hinge - pgs. 15-12 thru 15-14
Rollers in Cam Followers - pg. 15-24
15-2
15-0
R
Inch
Stud Type Cam Followers

pg. 15-22
Needle Roller Cam Followers

pg. 15-23
Rollers, Cast Nylon

Ball Bearing pg. 15-25
T
1
2
3
Rollers, Urethane
Ball Bearing pg. 15-26
Rollers, Urethane
Polymer Bearing pg. 15-27
Rollers, Neoprene
Polymer Bearing pg. 15-28
4
5
Rollers, Neoprene or Urethane

Sintered Bronze Bearing pg. 15-29
Idlers
pg. 15-30
Idlers, Low Cost

pg. 15-31
6
7
8
Idler Rollers
pg. 15-32
Feed Rollers
pg. 15-33
Feed Rollers
pg. 15-34
9
10
Friction Drive Wheels

pg. 15-35
Constant Force Springs

pgs. 15-36 thru 15-38
Neg'ator Spring Motors

pg. 15-39
11
12
13
Compact Sized Spring-Powered Reels

pg. 15-40
Spring-Powered Reels
Cable Attachment pg. 15-41
14
15
15-1
16
R
Inch
T
1
Spir'ator Spring-Powered Reels

pg. 15-42

pg. 15-43
Spring-Powered Reels
pgs. 15-44 & 15-45
Neg'ator Spring Motor Assemblies

pg. 15-46
Neg'ator Spring Motor Assemblies

pg. 15-47

pg. 15-48
Metal Shim Stock

pg. 15-49
Aluminum Shim Stock

pg. 15-50
Plastic Shim Stock

pg. 15-51
Lube Kit
pg. 15-52
Lubricant, Heavy-Duty
Moly Grease pg. 15-53
Gear Grease pg. 15-53
Lubricant, General Purpose

Silicone
pg. 15-54
Moly-Oil
pg. 15-54
Lubricant, Dry Film (TFE)

pg. 15-54
Penetrating & Cleaning Oil

pg. 15-55
Cutting Oil
pg. 15-55
2
3
4
5
6
7
8
Miscellaneous Tools
pg. 15-52
9
10
11
12
13
14
15
16
15-2
PRECISION GENEVA MECHANISMS

INTERMITTENT MOTION
4 & 5 POINTS
1/4 SHAFT
R
Inch
MATERIAL:
303 Stainless Steel
1
Precision
Component
DRIVER TRAVEL:
Either direction and reversible
T
1

1/8 & 3/16 shaft units and
special Geneva Mechanisms
2-1/4
1.250
.625
.2498 +.0005
-.0000
.977
.339
RECOMMENDED
CENTER DISTANCE
#50
SPOT
DRILL
1/32
#6-32
SET
SCREW
1.000 R.
+.002
1.969 -.000
1.3824 +.001
-.000
CAM FOLLOWER
(Ball Bearing)
+.0005
.2498 -.0000
Fig. 1 4 Point
2-1/4
1.250
+.0005
.2498 -.0000
.893
.262
RECOMMENDED
CENTER DISTANCE
#50
SPOT
DRILL
1/32
#6-32
SET
SCREW
1.250 R.
1.5187 +.001
-.000
CAM FOLLOWER
(Ball Bearing)
.2498 +.0005
-.0000
+.002
2.468 -.000
.625
10
Fig. 2 5 Point
11
12
INCH COMPONENT
Catalog Number
Fig.
No.
Driver
Motion
Intermittent
Driven
Motion
No. of
Points
No. of
Cam Followers
13
S9904Y-GIM072
S9904Y-GIM090
S9904Y-GIM090A
2
1
1
360
360
180
72
90
90
5
4
4
1
1
2
14
15
15-3
16
I
R
T
PRECISION GENEVA MECHANISMS

INTERMITTENT MOTION
6 & 8 POINTS
1/4 SHAFT
Inch
MATERIAL:
303 Stainless Steel
1
Precision
Component
DRIVER TRAVEL:
1
2
Either direction and reversible

1/8 & 3/16 shaft units and
special Geneva Mechanisms
.998
2-1/2
+.0005
.2498 -.0000
.250
1.500
#50
SPOT
DRILL
1.750 R
5
6
#6-32
SET
SCREW
+.0005
.2498 -.0000
+.002
3.466 -.000
7
8
1/32
RECOMMENDED
CENTER DISTANCE
+.001
1.9970 -.000
CAM FOLLOWER
(Ball Bearing)
Fig. 1 6 Point
2
1.000
.844
.137
.2498 +.0005
-.0000
#50
SPOT
DRILL
1/32
#6-32
SET
SCREW
2.000 R
10
+.0005
.2498 -.0000
11
.625
+.002
4.081 -.000
.625
CAM FOLLOWER
(Ball Bearing)
+.001
2.2056 -.000
.156
RECOMMENDED
CENTER DISTANCE
Fig. 2 8 Point
12
13
14
INCH COMPONENT
Catalog Number
Fig.
No.
Driver
Motion
Intermittent
Driven
Motion
No.
of
Points
S9904Y-GIM045
S9904Y-GIM060
2
1
360
360
45
60
8
6
15
16
15-4
ELECTROMECHANICAL LIMIT STOPS

ADJUSTABLE LIMITS
MATERIAL:
Base - Cast Aluminum, Black Anodized

Shaft - Stainless Steel
Inch
FEATURES:
Ball bearings used throughout.

Unit furnished with four miniature, single-pole double-throw switches.
Two adjusting screws permit the simple accurate adjustment of the
miniature switch actuators.
The Limit Stop also has an adjustable spring-loaded mechanical stop
incorporated to prevent damage from overriding.
Especially designed with a pilot diameter to permit servo type mounting.
Four clamps with #2-56 Fillister Head screws are supplied for mounting.
T
1
2
SWITCH DATA:
5 amps 250V AC
Rating at 30V DC:
Inductive: 3 amps at sea level and 2.5 amps at 50,000 feet;
Resistive: 5 amps at sea level and 50,000 feet;
Maximum inrush 24 amps.
.5000
MTG. .4995
WORKING RANGE:
1.000
0 to the adjustable rotation limit, in degrees.
.1875
.1873
.125
.123
.60 MAX.
.750
MAX. TORQUE CAPACITY:

150 ozf in.
.594
3/32
.500
Shaft length other than standard 1 in. can be

furnished on special order.
1.000
1-13/32
.062
1.000
2.438
2.531
INCH COMPONENT
CATALOG NUMBER
S9200A-G163-

Example: S9200A-G163-02 has a 450 750 rotation limit.
Model
No.
Rotation Limit
Degrees
Model
No.
Rotation Limit
Degrees
Model
No.
Rotation Limit
Degrees
00
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
0 150
150 450
450 750
750 1050
1050 1350
1350 1650
1650 1950
1950 2250
2250 2550
2550 2850
2850 3150
3150 3450
3450 3750
3750 4050
4050 4350
4350 4650
4650 4950
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
4950 5250
5250 5550
5550 5850
5850 6150
6150 6450
6450 6750
6750 7050
7050 7350
7350 7650
7650 7950
7950 8250
8250 8550
8550 8850
8850 9150
9150 9450
9450 9750
9750 10050
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
10050 10350
10350 10650
10650 10950
10950 11250
11250 11550
11550 11850
11850 12150
12150 12450
12450 12750
12750 13050
13050 13350
13350 13650
13650 13950
13950 14250
14250 14550
14550 14850
14850 15150
9
10
11
12
13
14
15
15-5
16
RATCHETS AND PAWLS 48, 32 & 24 PITCH

MATERIAL:
Brass
Inch
T
F
3/4
1
2
5/32
11/32 R
1/8
3/8
3
4
5
6
7
8
9
10
11
12
13
15
16
Fig. 2 Pawl
INCH COMPONENT
Catalog Number
Fig. 1 Ratchets
A 1B14-48024
A 1B14-48036
A 1B14-48048
A 1B14-48060
A 1B14-48072
A 1B14-48096
A 1B14-32016
A 1B14-32020
A 1B14-32028
A 1B14-32032
A 1B14-32048
A 1B14-32064
A 1B14-32096
A 1B14-32100
A 1B14-A32016
A 1B14-A32024
A 1B14-A32032
A 1B14-A32040
A 1B14-A32048
A 1B14-A32064
A 1B14-A32096
A 1B14-A32100
A 1B14-24012
A 1B14-24018
A 1B14-24024
A 1B14-24030
A 1B14-24036
A 1B14-24048
A 1B14-24072
Catalog Number
C360 Brass
14
.094 +.001
-.000
9/16 R
O.D. B
Fig. 2 Pawls
A 1B14-02
A 1B14-04
A 1B14-06
15-6
Steel,
Low Carbon
A 1C14-02
A 1C14-04
A 1C14-06
Fig. 1 Ratchet
Pitch
Number
of
Teeth
O.D.
B
Bore
F
Face
Width
D
Depth
48
48
48
48
48
48
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
24
24
24
24
24
24
24
24
36
48
60
72
96
16
20
28
32
48
64
96
100
16
24
32
40
48
64
96
100
12
18
24
30
36
48
72
.500
.750
1.000
1.250
1.500
2.000
.500
.625
.875
1.000
1.500
2.000
3.000
3.125
.500
.750
1.000
1.250
1.500
2.000
3.000
3.125
.500
.750
1.000
1.250
1.500
2.000
3.000
3/16
3/16
1/4
1/4
1/4
5/16
3/16
3/16
3/16
3/16
1/4
5/16
5/16
5/16
3/16
3/16
1/4
1/4
1/4
5/16
3/8
3/8
3/16
3/16
1/4
1/4
1/4
5/16
3/8
1/8
1/8
1/8
1/8
1/8
1/8
1/16
1/16
1/16
1/16
1/16
1/16
1/16
1/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
1/4
1/4
1/4
1/4
1/4
1/4
1/4
.038
.038
.038
.038
.038
.038
.055
.055
.055
.055
.055
.055
.055
.055
.045
.045
.045
.045
.045
.045
.045
.045
.065
.065
.065
.065
.065
.065
.065
T
Thickness
1/16
1/8
3/16
STANDARD DIFFERENTIALS 96 PITCH

SHAFT DIAMETERS - 5/64, 3/32 & 1/8
MATERIAL:
Inch
Stainless Steel
Ball Bearings
Sterling Instrument standard catalog end gears which are ordered at the
same time as the below differential(s) will be assembled to the differential
free of charge. See the Alphabetical Index for available standard end gears.
10 arc minutes maximum backlash between end gears.
1
2
.3752
.3750
.646
.42
.21
1/16
.0781
.0777
.987
CLEARANCE
3
4
.323
1-1/4
2-1/2
Fig. 1
6
.750
.51
.26
1/16
.3752
.3750
1/16
.0936
.0933
.957
CLEARANCE
.750
.51
.26
.3752
.3750
.1249
.1246
.957
CLEARANCE
8
.375
.375
1-1/2
1-3/4
3-1/2
Fig. 2
Fig. 3
10
INCH COMPONENT
Catalog Number
Fig.
No.
Pitch
Shaft
Dia.
S9590A-TS4
S9520A-TS5
S9540A-TS6
1
2
3
96
96
96
5/64
3/32
1/8
Max.
Torque
Rating
ozf in.
20
20
17
Max.
Breakaway
Operating
Weight
Torque
oz.
Speed
ozf in.
rpm
1000
1000
1000
.05
.05
.05
.5
.6
.7
11
12
13
14
15
15-7
16
HOLLOW SHAFT DIFFERENTIALS 96 & 64 PITCH

SHAFT DIAMETERS 1/8, 3/16 & 1/4
R
T
1
MATERIAL:
Inch
Stainless Steel
Ball Bearings
Sterling Instrument standard catalog end gears which are ordered

at the same time as the below differential(s) will be assembled to
the differential free of charge. Consult the differential end gear
section of this catalog for available standard end gears. 10 arc
minutes maximum backlash between end gears.
2
3
4
.080
.076
.30
.15
.098
.097
5
6
.3121
.3119
7
8
.42
.703
Fig. 1 96 PITCH
.095
.093
.527
.095
.093
.0630
.0625
.5003
.5001
.600
CLEARANCE
CLAMP
SUPPLIED
.50
.25
.1875
.1865
.61
1.000
.1255
.1250
.883
CLEARANCE
CLAMP
SUPPLIED
Fig. 2 64 PITCH
.250
.249
.26
.127
.125
.1880
.1875
.587
.29
.3125
.3115
.2505
.2500
9
10
.6529
.6527
11
12
13
14
Fig. 3 64 PITCH
.9066
.9064
.988
CLEARANCE
CLAMP
SUPPLIED
.89
1.44
Fig. 4 64 PITCH
1.188
CLEARANCE
CLAMP
SUPPLIED
INCH COMPONENT
Catalog Number
Fig.
No.
Pitch
Shaft
Dia.
S9490A-T700
S9430A-T701
S9440A-T702
S9460A-T703
1
2
3
4
96
64
64
64
1/16
1/8
3/16
1/4
15
16
.77
1.220
15-8
Max.
Torque
Rating
ozf in.
8
25
27
28
Max.
Operating Breakaway Weight
Torque
oz.
Speed
rpm
700
900
900
900
ozf in.
.07
.07
.07
.15
.5
.6
.8
1.7
SOLID SHAFT DIFFERENTIALS 96 & 64 PITCH

SHAFT DIAMETERS - 5/64, 1/8, 3/16 & 1/4
MATERIAL:
Inch
Stainless Steel
Ball Bearings

at the same time as the below differential(s) will be assembled to
the differential free of charge. Consult the differential end gear
section of this catalog for available standard end gears. 10 arc
minutes maximum backlash between end gears.
T
1
2
3
.080
.076
.3121
.3119
.31
.15
.095
.093
.0780
.0777
.600
CLEARANCE
.5003
.5001
.50
.25
.1249
.1246
4
5
.880
CLEARANCE
6
.279
.558
1.556
.354
.708
1.788
1/2
.527
.26
Fig. 2 64 Pitch
Fig. 1 96 Pitch
.095
.093
17/32
.6529
.6527
.127
.125
.1874
.1871
.29
.587
.9066
.9064
.2499
.2496
1.188
CLEARANCE
.993
CLEARANCE
10
.495
.990
1/2
1.922
Fig. 4 64 Pitch
.381
.762
1/2
1.760
Fig. 3 64 Pitch
11
12
INCH COMPONENT
Catalog Number
S9590A-T708
S9540A-T709
S9550A-T710
S9570A-T711
Fig.
No.
Pitch
1
2
3
4
96
64
64
64
Shaft
Dia.
5/64
1/8
3/16
1/4
Max.
Torque
Rating
ozf in.
10
25
25
30
Max.
Breakaway
Operating
Weight
Torque
oz.
Speed
ozf in.
rpm
1000
1000
1000
1000
.05
.07
.07
.15
.5
.6
.8
1.9
13
14
15
15-9
16
STANDARD DIFFERENTIALS 72, 64 & 48 PITCH

SHAFT DIAMETERS - 1/8, 3/16 & 1/4
R
T
1
MATERIAL:
Inch
Stainless Steel with Anodized Aluminum Spider Gear

Ball Bearings
Sterling Instrument standard catalog end gears which are ordered at the
same time as the below differential(s) will be assembled to the differential
free of charge. Consult the differential end gear section of this catalog for
available standard end gears. 10 arc minutes maximum backlash between
end gears.
2
3
1.418
.6877
.6874
.1249
.1246
.95
.48
1/8
1.370
CLEARANCE
5
6
Fig. 1 72 Pitch
7
8
9
RING CLAMP
FOR END GEAR
.709
2.066
.9377
.9374
.1874
.1871
1.19
.59
1/8
1.706
CLEARANCE
10
12
13
1.960
CLEARANCE
RING CLAMP
FOR END GEAR
1.254
2-1/2
Fig. 2 64 Pitch
Fig. 3 48 Pitch
INCH COMPONENT
14
Catalog Number
Fig.
No.
Pitch
Shaft
Dia.
15
S9540A-TS1
S9550A-TS2
S9570A-TS3
1
2
3
72
64
48
1/8
3/16
1/4
16
1.1252
1.1249
.2499
.2496
1.37
.69
RING CLAMP
FOR END GEAR
1.033
11
2.507
3/16
15-10
Max.
Torque
Rating
ozf in.
49
80
80
Max.
Breakaway
Operating
Weight
Torque
oz.
Speed
ozf in.
rpm
600
2400
2400
.2
.2
.09
2.3
5.2
7.5
DIFFERENTIALS
ANTI-BACKLASH DIFFERENTIAL - 72 PITCH
PATENT NO. 3,137,181
Inch
MATERIAL:
Stainless Steel
Ball Bearings

at the same time as the below differential will be assembled to the
differential free of charge. Consult the differential end gear section
of this catalog for available standard end gears. Zero backlash
between end gears.
T
1
2
.81
.41
.094
.6529
.6527
.1249
.1246
1-3/32
CLEARANCE
3
4
.611
1.222
2.250
INCH COMPONENT
Catalog Number
Pitch
S9540A-TS9
72
Max.
Torque
Rating
ozf in.
50
Max.
Breakaway
Breakaway
Operating
Torque
Torque
Speed
(One Tooth Load) (One Tooth Load)
rpm
1000
ozf in.
.15
Weight
oz.
ozf in.
.3
1.8
STANDARD DIFFERENTIAL - 64 PITCH
7
8
MATERIAL:
Stainless Steel
Ball Bearings

at the same time as the below differential will be assembled to the
differential free of charge. Consult the differential end gear section of
this catalog for available standard end gears. 10 arc minutes maximum
backlash between end gears.
.69
.34
.093
.5003
.5001
.1249
.1246
.947
CLEARANCE
10
11
12
.477
.955
1.500
13
INCH COMPONENT
Catalog Number
S9540A-TS7
Pitch
64
Max.
Torque
Rating
ozf in.
26
Max.
Operating
Speed
rpm
800
Breakaway
Torque
Weight
.08
.9
ozf in.
oz.
14
15
15-11
16
FLEXI-HINGE
MATERIAL:
Inch
T
1
2
3
4
5
6
7
-65F to +350F
APPLICATIONS:
Optical Mounts, Belt Tensioners, Linear Positioners,

Lever Actuators and Sensitive Measuring Instruments.
Flexi-Hinge is a compact, versatile, easy-to-install device
which requires no maintenance, offers indefinite life and is
resistant to detrimental environmental conditions. Highly
accurate, even after a lifetime of cycling, Flexi-Hinges
Cutaway view shows how crossed springs
offer the optimum solution for many of today's engineering
are situated within the two-part capsule.
problems.
The design utilizes crossed springs made to exacting
tolerances of high-strength corrosion-resistant steel,
capsuled in a cylindrical housing, to provide angular travel
up to 30. They are frictionless, require no lubrication, can
function at limited angular travels indefinitely, are selfcentering when unloaded, and have extremely low hysteresis.
Lubrication migration and brinelling are eliminated.
Mounting Methods:
Flexi-Hinges perform their function without maintenance
within a wide temperature range, extreme vibration, dust, Set Screw
Clamp Screw
abrasive slurry, and even a vacuum.
MAXIMUM ANGULAR TRAVEL

FOR INDEFINITE LIFE:
Series 10: 15
Series 20: 7.5
Series 30: 3.7
SPECIFICATIONS:
Spring Rate Tolerance:

10% at Zero Load
Mounting Hole:
.0005 to .0010 Larger than Flexi-Hinge O.D.
Radial Pins
9
10
Axial Pins
11
12
13
Locator Flats
14
15
16
15-12
FLEXI-HINGE APPLICATIONS
GIMBALS
Free from backlash,

friction and wear,
Flexi-Hinges give the
extreme accuracy needed
for positioning precision optics.
Inch
T
1
Mirror
GAGES / SENSORS
Miniature sizes which are

free of error from
backlash, friction
or wear make
Flexi-Hinges
ideal for applications
where positions must be accurately
measured or outside forces sensed.
Belt or chain tensioning can

be easily achieved through
the use of Flexi-Hinges.
Tolerant of hostile environments and
not subject to wear, extreme long life
can be expected without maintenance.
TENSIONERS
I I I I
I I
I
Optical scanners using Flexi-Hinges

provide for the ultimate in cost-effective design.
They allow for easy assembly and, with indefinite life
expectancies, perform
with undiminished accuracy.
Electromagnet
OSCILLATING MIRRORS
I I I I I I
I I
I
I I I I
I I
I I
I I I I I I
I I
I
3
4
VIBRATING / SORTING
MECHANISMS
A workhorse, capable
of supporting heavy
loads for years of
continuous service
without wear or
deterioration, Flexi-Hinges
are ideal for equipment such as vibrating
hoppers operating in severe environments.
OPTICAL or MAGNETIC DISC

READ / WRITE HEADS
LINEAR POSITIONERS
Free of errors due to backlash, friction or wear,

Flexi-Hinges mounted
in suitable geometric
structures can provide
accurate linear movement
or adjustment.
With their constant,

predictable spring rate,
Flexi-Hinges are
immune to the problems
of starting vs. moving
torque requirements of
conventional bearings.
Also, since they operate without backlash
errors or wear, a lifetime of accurate performance
can be expected.
5
6
7
8
9
10
11
LEVEL ACTUATORS
Accurate motion requirements

in areas of contamination,
temperature extremes, or
in a vacuum, can be easily
provided through linkages
utilizing Flexi-Hinge.
12
13
RESTRAINED or DAMPENED
OSCILLATING MOTION
14
Eccentric or circular
oscillating mechanisms
can utilize Flexi-Hinge
to provide centralizing and
dampening actions for a lifetime
of maintenance-free performance.
15
15-13
16
FLEXI-HINGE
R
Inch
220000 Cycles
150
125
50
25
0
10
13
Indefinite Life
75
50
10
20
30
Load Increasing
40
50
70
80
90
100
% Max. Single or Double
35000 Cycles
175
Angle Increasing
60
S99FX(D,S)-XXXX30 Series Bearings

Max. Angle 3.7
200
% Max. Allowable Angle
Stress Curves
100
150
220000 Cycles
125
100
Indefinite Life
75
50
25
0
10
20
30
Load Increasing
40
50
60
15
15-14
70
80
90
100
% Max . Single or Double
* Max. Angle of Deflection = The deflection angle from the null position. Positive or Negative.
14
16
70
80
90
100
% Max. Single or Double
25
12
60
220000 Cycles
125
11
50
35000 Cycles
150
10
40
175
Angle Increasing
20
30
Load Increasing

Max. Angle 7.5
200
Stress Curves
75
Indefinite Life
100
Stress Curves
175
Angle Increasing
200

Max. Angle 15.0
SINGLE END FLEXI-HINGE

LIMITED ANGLE ROTARY APPLICATIONS
ZERO BACKLASH
LUBRICATION-FREE
CONSTANT LINEAR TORSIONAL SPRING RATE
OPERATES IN ALL ENVIRONMENTS
SELF-CENTERING WHEN LOAD IS REMOVED
R
Inch
1
Precision
Component
MATERIAL:
-65F to +350F

Series 10: 15
Series 20: 7.5
Series 30: 3.7
3
D
The last two digits of the Catalog Number

denotes the series.
4
X
L
SECTION X-X
INCH COMPONENT
Catalog Number
S99FXS-012510
S99FXS-012520
S99FXS-012530
S99FXS-015610
S99FXS-015620
S99FXS-015630
S99FXS-018710
S99FXS-018720
S99FXS-018730
S99FXS-025010
S99FXS-025020
S99FXS-025030
S99FXS-031210
S99FXS-031220
S99FXS-031230
S99FXS-037510
S99FXS-037520
S99FXS-037530
S99FXS-050010
S99FXS-050020
S99FXS-050030
S99FXS-062510
S99FXS-062520
S99FXS-062530
S99FXS-075010
S99FXS-075020
S99FXS-075030
S99FXS-100010
S99FXS-100020
S99FXS-100030
D
O.D.
+.0000
-.0005
.1250
.1250
.1250
.1562
.1562
.1562
.1875
.1875
.1875
.2500
.2500
.2500
.3125
.3125
.3125
.3750
.3750
.3750
.5000
.5000
.5000
.6250
.6250
.6250
.7500
.7500
.7500
1.0000
1.0000
1.0000
L
Length
.003
.200
.200
.200
.250
.250
.250
.300
.300
.300
.400
.400
.400
.500
.500
.500
.600
.600
.600
.800
.800
.800
1.000
1.000
1.000
1.200
1.200
1.200
1.600
1.600
1.600
B
End
Length
min.
.088
.088
.088
.114
.114
.114
.136
.136
.136
.184
.184
.184
.232
.232
.232
.279
.279
.279
.374
.374
.374
.469
.469
.469
.564
.564
.564
.764
.764
.764
Spring
Rate
lbf in./
degree
.0003
.0018
.0148
.0004
.0037
.0296
.0007
.0060
.0482
.0018
.0148
.1185
.0037
.0296
.2367
.0065
.0482
.4002
.0148
.1185
.9486
.0296
.2367
1.8940
.0482
.4002
3.2610
.1185
.9486
7.8023
Max. Load Capacity
at Zero Deflection
Tension
Compression
lbf
lbf
.95
3.80
8.90
12.70
25.30
25.30
1.40
5.60
19.60
13.70
39.30
39.30
2.00
7.80
27.90
19.50
55.80
55.80
3.60
14.20
50.00
35.00
100.00
100.00
22.80
5.70
55.00
78.60
157.10
157.10
33.60
8.40
113.00
79.10
226.00
226.00
14.40
57.40
140.00
200.00
400.00
400.00
92.00
23.00
315.80
211.10
631.50
631.50
32.40
129.40
317.20
453.10
906.10
906.10
236.60
59.20
566.30
809.00
1616.00
1616.00
6
7
8
9
10
11
12
13
14
15
15-15
16
I
R
T
DOUBLE END FLEXI-HINGE

LIMITED ANGLE ROTARY APPLICATIONS
ZERO BACKLASH
LUBRICATION-FREE
CONSTANT LINEAR TORSIONAL SPRING RATE
OPERATES IN ALL ENVIRONMENTS
SELF-CENTERING WHEN LOAD IS REMOVED
Inch
1
Precision
Component
MATERIAL:
1
2
3
4
-65F to +350F
Series 10: 15
Series 20: 7.5
Series 30: 3.7
The last two digits of the Catalog Number

denotes the series.
X
5
6
SECTION X-X
INCH COMPONENT
Catalog Number
7
8
9
10
11
12
13
14
S99FXD-012510
S99FXD-012520
S99FXD-012530
S99FXD-015610
S99FXD-015620
S99FXD-015630
S99FXD-018710
S99FXD-018720
S99FXD-018730
S99FXD-025010
S99FXD-025020
S99FXD-025030
S99FXD-031210
S99FXD-031220
S99FXD-031230
S99FXD-037510
S99FXD-037520
S99FXD-037530
S99FXD-050010
S99FXD-050020
S99FXD-050030
S99FXD-062510
S99FXD-062520
S99FXD-062530
S99FXD-075010
S99FXD-075020
S99FXD-075030
S99FXD-100010
S99FXD-100020
S99FXD-100030
15
16
15-16
D
O.D.
+.0000
-.0005
.1250
.1250
.1250
.1562
.1562
.1562
.1875
.1875
.1875
.2500
.2500
.2500
.3125
.3125
.3125
.3750
.3750
.3750
.5000
.5000
.5000
.6250
.6250
.6250
.7500
.7500
.7500
1.0000
1.0000
1.0000
L
Length
.003
.200
.200
.200
.250
.250
.250
.300
.300
.300
.400
.400
.400
.500
.500
.500
.600
.600
.600
.800
.800
.800
1.000
1.000
1.000
1.200
1.200
1.200
1.600
1.600
1.600
B
End
Length
min.
.038
.038
.038
.050
.050
.050
.060
.060
.060
.083
.083
.083
.105
.105
.105
.128
.128
.128
.173
.173
.173
.210
.210
.210
.263
.263
.263
.363
.363
.363
C
Center
Length
min.
.070
.070
.070
.100
.100
.100
.120
.120
.120
.165
.165
.165
.210
.210
.210
.255
.255
.255
.345
.345
.345
.430
.430
.430
.520
.520
.520
.720
.720
.720
Spring
Rate
lbf in./
degree
.0003
.0018
.0148
.0004
.0037
.0296
.0007
.0060
.0482
.0018
.0148
.1185
.0037
.0296
.2367
.0065
.0482
.4002
.0148
.1185
.9486
.0296
.2367
1.8940
.0482
.4002
3.2610
.1185
.9486
7.8023
Max. Load Capacity
at Zero Deflection
Compression
Tension
lbf
lbf
4.60
2.30
25.00
17.50
28.00
28.00
7.00
3.50
40.00
28.00
45.00
45.00
10.00
5.00
60.00
40.00
63.00
63.00
18.00
9.00
70.00
100.00
115.00
115.00
28.00
14.00
150.00
110.00
175.00
175.00
20.00
40.00
160.00
220.00
250.00
250.00
70.00
35.00
380.00
280.00
450.00
450.00
110.00
55.00
450.00
620.00
700.00
700.00
160.00
80.00
630.00
900.00
1000.00
1000.00
140.00
280.00
1500.00
1100.00
1800.00
1800.00
PRECISION CAM ASSEMBLIES

ADJUSTABLE
PIN-TYPE HUB
CLAMP-TYPE HUB
R
Inch
MATERIAL:
303 Stainless Steel
1
Precision
Component
SPECIFICATION:
Clamp-Type Hub
T
1
* D Tolerance: 0/-.0030
Fig. 1 Pin-Type Hub
Fig. 2 Clamp-Type Hub
.156
.078
SET SCREW
.062
5
SUB DRILL
.437
.565 R
Fig. 1 Pin-Type Hub
.156
FOR CLAMPS
SEE INDEX
.078
.062
9
.437
.565 R
10
Fig. 2 Clamp-Type Hub
INCH COMPONENT
Catalog Number
Fig. 1 Pin-Type Hub
S9931A-P03
S9931A-P04
S9931A-P06
S9931A-P08
Fig. 2 Clamp-Type Hub *
S9931A-C03
S9931A-C04
S9931A-C06
S9931A-C08
Shaft
Size
B
Bore
+.0005
-.0000
11
D
Dia.
Set
Screw
Sub
Drill
.1200
.1250
.1875
.2500
.1200
.1248
.1873
.2498
.3125
.3125
.3750
.5000
#2-56
#2-56
#4-40
#6-32
.029
.029
.040
.086
.1200
.1250
.1875
.2500
.1200
.1248
.1873
.2498
.2500
.2500
.3125
.3750
12
13
14
15
NEW
15-17
16
ADJUSTABLE CAMS
MATERIAL:
Steel, Zinc Plated
Inch
T
90
.593 R
1
.160
1.000 R
#8-32
SET SCREW
#6-32
ADJ. SCREW
5/8
.437
STAKE
.183 R
B
.160
.050
Fig. 1
3/32
.100
.875 R
15/64
#6-32
ADJ. SCREW
.183 R
B
2.000
5/8
(2) #8-32
SET SCREWS
.593 R
.437
STAKE
.100
.050
.875 R
Fig. 2
15/64
15/16
SPRING
3.500
1.750 R
#10-32 X 3/8
10
INCH COMPONENT
Catalog Number
13
14
15
16
HEX NUT
1-1/8 ACROSS
FLATS
1/16
11/32
Fig. 3
11
12
Adjustment 180350
WASHER (2)
.020 X 5/8 X1
8
9
Adjustment 90180
A
A
A
A
A
A
A
A
A
3Y
3Y
3Y
3Y
3Y
3Y
3Y
3Y
3Y
15-18
1-106
1-108
1-110
1-112
1-206
1-208
1-210
1-212
1-316
Fig.
No.
1
1
1
1
2
2
2
2
3
B
Bore
+.001
-.000
.1875
.2500
.3125
.3750
.1875
.2500
.3125
.3750
.5010
CAMS
MATERIAL:
Inch
Cam - Acetal, Black

Insert - Brass
SPECIFICATIONS:
Cams with:
.125 bore have a #2-56 set screw & spot drill.
.188 bore have a #4-40 set screw & spot drill.
T
1
.064 (TYP)
SET SCREW
.24 (TYP)
.63
SPOT
DRILL
B .37 (TYP)
1/8
Fig. 1
.310 (TYP)
5
.63
.65
.65
6
7
Fig. 2
Fig. 3
1.000
Fig. 4
.63 R
.63
45 (TYP)
.38
.50 R
Fig. 5
10
Fig. 6
11
INCH COMPONENT
Catalog Number
Fig.
No.
A 3Y 3-1Z04
A 3Y 3-1Z06
A 3Y 3-2Z04
A 3Y 3-2Z06
A 3Y 3-3Z04
A 3Y 3-3Z06
A 3Y 3-4Z04
A 3Y 3-4Z06
A 3Y 3-5Z04
A 3Y 3-5Z06
A 3Y 3-6Z04
A 3Y 3-6Z06
1
1
2
2
3
3
4
4
5
5
6
6
B
Bore
+.001
-.000
.125
.188
.125
.188
.125
.188
.125
.188
.125
.188
.125
.188
Rise
per 15
.010
.010
.020
.020
.030
.030
.040
.040
15-19
12
13
14
15
16
CAMS
MOLDED
MATERIAL:
Inch
Acetal, Black
SPECIFICATIONS:
Bore is sized for press fit on standard shafting.

Use straight knurl for maximum torques.
2
.064 (TYP)
.24 (TYP)
.63
.37
B (TYP)
4
.310 (TYP)
Fig. 1
.63
.65
.65
7
8
9
Fig. 2
Fig. 3
1.000
Fig. 4
.63 R
.63
45 (TYP)
10
.38
.50 R
Fig. 5
11
Fig. 6
12
INCH COMPONENT
13
14
15
16
Catalog Number
Fig.
No.
B
Bore
Rise
Per 15
A 3Y 3-1M08
A 3Y 3-2M08
A 3Y 3-3M08
A 3Y 3-4M08
A 3Y 3-5M08
A 3Y 3-6M08
1
2
3
4
5
6
1/4
1/4
1/4
1/4
1/4
1/4
.010
.020
.030
.040
15-20
CAM FOLLOWERS
SHALLOW HEAD
MATERIAL:
Bearing - 440C or DD Stainless Steel, ABEC 3, Double Shield

Inch
FLAT WASHER
LOCK WASHER
SHIM .010
HEX NUT
SHOULDER
SCREW
1
C B
BALL BEARING
A
1/16
INCH COMPONENT
A
B
Dia.
C
Dia.
Thread
9/32
15/64
15/64
5/16
27/64
1/2
43/64
.2500
.3125
.3125
.3750
.5000
.6250
.8750
3/16
3/16
7/32
1/4
5/16
3/8
9/16
.1094
.1406
.1406
.1562
.1960
.1960
.2812
#4-40
#2-56
#2-56
#4-40
#8-32
#10-32
1/4-20
Catalog Number
A
A
A
A
A
A
A
7Y
7Y
7Y
7Y
7Y
7Y
7Y
5-CF2512
5-CF3109A
5-CF3109B
5-CF3712
5-CF5018
5-CF6225
5-CF8737
4
5
6
7
STANDARD HEAD
MATERIAL:
Bearing - 440C or DD Stainless Steel, ABEC 3, Double Shield

LOCK WASHER FLAT WASHER
SHIM .010
HEX NUT
SHOULDER
SCREW
10
C B
11
BALL BEARING
A
12
INCH COMPONENT
Catalog Number
B
Dia.
C
Dia.
Thread
S9930A-CF-1
S9930A-CF-2
S9930A-CF-3
S9930A-CF-4
S9930A-CF-5
S9930A-CF-6
S9930A-CF-7
1/4
1/4
1/4
5/16
5/16
3/8
1/2
.2500
.3125
.2500
.3125
.3750
.5000
.6250
5/32
3/16
3/16
7/32
1/4
5/16
3/8
.1406
.1406
.1094
.1406
.1562
.1960
.1960
3/32
3/32
1/8
1/8
1/8
5/32
5/32
#1-64
#2-56
#4-40
#2-56
#4-40
#8-32
#10-32
15-21
13
14
15
16
I
R
T
1
2
3
4
STUD TYPE CAM FOLLOWERS

NEEDLE BEARINGS
CAGE-GUIDED
FULL-COMPLEMENT
Inch
MATERIAL:
Roller & Needles - 52100 Steel

Stud - 1055 Steel
Catalog Number
Dyn.
C
S9930A-CFS0750
S9930A-CFS0875
S9930A-CFS1125
S9930A-CFS1250
S9930A-CFS1375
S9930A-CFS1500
1830
1830
2700
4300
4300
5500
Load Ratings * lbf

Stat. Dyn. Stat.
Co
Cw
Cow
2900
2900
4300
6300
6300
9100
1140
1120
2190
3300
3600
4200
1650
2220
3550
4800
5400
6900
* The basic load ratings C and Co apply if the bearing outer

ring (with cylindrical outside surface) is mounted into a
housing with standard bearing fit; when used as track roller,
the load rating Cw and Cow apply.
.031
B2
M1
d
D M
M G
d2
G2
7
B1
INCH COMPONENT
D
Roller
Dia.
Catalog Number
B1
Stud
Length
11
S9930A-CFS0750
S9930A-CFS0875
S9930A-CFS1125
S9930A-CFS1250
S9930A-CFS1375
S9930A-CFS1500
.875
.875
1.000
1.250
1.250
1.500
12
Catalog Number
(Ref.)
B2
Location
r
Corner
Radius
S9930A-CFS0750
S9930A-CFS0875
S9930A-CFS1125
S9930A-CFS1250
S9930A-CFS1375
S9930A-CFS1500
.250
.250
.250
.312
.312
.375
.020
.039
.039
.039
.039
.059
9
10
13
14
C
Roller
Width
+.0010
-.0000
.3750
.3750
.4375
.5000
.5000
.6250
+.000
-.005
.500
.500
.625
.750
.750
.875
Max.**
Speed
B
Length
G
Thread
UNF
1.406
1.406
1.656
2.031
2.031
2.406
3/8-24
3/8-24
7/16-20
1/2-20
1/2-20
5/8-18
Stud Housing
Dia.
rpm
Min.
Max.
6000
6000
5000
4400
4400
3400
.3750
.3750
.4375
.5000
.5000
.6250
.3755
.3755
.4380
.5005
.5005
.6255
Lubrication
G1
Thread Holes Dia.
Length
M
M
1
.375
.375
.500
.625
.625
.750
d2
Clamp.
Dia.
Min.
.500
.500
.594
.750
.750
.891
.188
.125
Max. ***
Clamp.
Torque
lbf in.
65
65
105
165
165
335
** Limiting speeds shown are for grease lubrication. With oil lubrication, the speed can be increased by approximately
30% except for sealed versions (which are available on special order).
*** Clamping torque is based on lubricated threads. If threads are dry, double the values shown.
15
16
+.000
-.001
.750
.875
1.125
1.250
1.375
1.500
d
Stud
Dia.
15-22
NEEDLE ROLLER CAM FOLLOWERS YOKE TYPE

FOR INTERMITTENT SHOCK & HEAVY LOADS
SEALED
MATERIAL:
Inch
SAE 52100 Steel, Hardened and Ground
APPLICATIONS:
For applications where load exceeds the

capabilities of stud type cam followers.
For shaft or clevis mounting. Clevis mounting
uses a high strength pin & provides support on
both sides of the cam follower.
For applications such as linear motion table
supports, tracks, slideways and conveying
equipment where minimum friction assures
constant turning to eliminate wear.
T
1
2
3
SPECIFICATIONS:
Recommended Shaft Diameters .0002

.2497 for Bore .2500
.3122 for Bore .3125
.3747 for Bore .3750
.4372 for Bore .4375
.4997 for Bore .5000
C1
C
3/32
D d
5
6
7
8
INCH COMPONENT
Catalog Number
S9930C-YN0824
S9930C-YN0828
S9930C-YN1032
S9930C-YN1036
S9930C-YN1240
S9930C-YN1244
S9930C-YN1448
S9930C-YN1452
S9930C-YN1656
S9930C-YN1660
d Nom.
Bore
+.0002
-.0004
.2500
.2500
.3125
.3125
.3750
.3750
.4375
.4375
.5000
.5000
D
C
C1
B
Roller Dia. Roller Width Overall Width Dia.
+.000
+.000
+.005
Ref.
-.001
-.005
-.010
.750
.875
1.000
1.125
1.250
1.375
1.500
1.625
1.750
1.875
.500
.500
.625
.625
.750
.750
.875
.875
1.000
1.000
.5625
.5625
.6875
.6875
.8125
.8125
.9375
.9375
1.0625
1.0625
5/8
5/8
23/32
23/32
1
1
1-1/8
1-1/8
1-1/4
1-1/4
Basic
Static
Dynamic Capacity
Rating
Max.
lbs
1660
1660
2225
2225
3930
3930
4840
4840
6385
6385
lbs
4130
4130
6120
6120
8500
8500
11280
11280
15840
15840
9
10
11
12
13
14
15
NEW
15-23
16
ROLLERS IN CAM FOLLOWERS

COMPONENTS:
R
T
1
2
3
4
5
6
Rollers - Made of Cast Nylon (Polyamide-12) material

which has unique benefits:
Runs quieter than metal.
Has low rolling resistance.

Absorbs vibration and shocks.
Maintains dimensional stability
under adverse conditions.

Eliminates wear to rail and track.
Inch
Bearings - Precision ball bearings are totally enclosed

and metal shielded on both sides to
prevent dirt and moisture penetration and thus
better performance and longer life of the unit.
Shoulder Screws - Made of heat-treated alloy steel ground
to a highly polished finish. They are undercut
under the head allowing head to flush mount
to surface.
CAPACITY:
Up to 200 lbf vertical load
APPLICATION:
For consistent, reliable and long-lasting operations in any
application involving rail and track mechanism.
For selection of shoulder screws, please see catalog D810 pages 10-7 thru 10-10.
For selection of shaft spacers, please see catalog D810 pages 10-45 & 10-46.
7
ROLLER WIDTH
8
9
10
11
BEARING
SPACER
ROLLER
SHOULDER
SCREW
FLANGE
NUT
SHOULDER
DIAMETER
SHOULDER
DIAMETER
O.D.
O.D.
HEAD
DIAMETER
HEAD
DIAMETER
HEAD
LENGTH
SHOULDER
SCREW
Short
(Fixed Follower Application)
12
13
14
15
16
ROLLER WIDTH
BEARING
ROLLER
15-24
HEAD
LENGTH
SPACER
L
Long
(Rocker Arm Follower Application)
ROLLERS CAST NYLON, BALL BEARING

NYLON SURFACE
WITH BEARING
FOR LOADS OF 50 TO 230 POUNDS
R
Inch
MATERIAL:
Roller - Cast Nylon 12 (PA12G)

Bearing - Ball Bearing Shielded on Both Sides
T
1
2
3
4
ROLLER
BEARING
6
O.D.
7
8
W
INCH COMPONENT
Catalog Number
O.D.
S7NPCY-25081
S7NPCY-25100
S7NPCY-38131
S7NPCY-38138
S7NPCY-50150
S7NPCY-50200
.812
1.000
1.312
1.375
1.500
2.000
B
Bore
+.000
-.005
.250
.250
.375
.375
.500
.500
W
Bearing
Width
E
Roller
Width
Load
Capacity
.196
.281
.281
.281
.312
.312
.274
.390
.500
.500
.438
.500
50
90
140
150
160
230
lbf
10
11
12
13
14
15
15-25
16
I
R
ROLLERS URETHANE, BALL BEARING

URETHANE SURFACE
WITH DOUBLE-SHIELDED ABEC 3 BEARING
Inch
MATERIAL:
Roller - Urethane 60 Durometer

Ground Outside Diameter
Bearing, Double-Shielded - Stainless Steel
1
2
NO CHAMFER
ROLLER
4
5
O.D.
BEARING
6
A
7
8
9
10
11
SECTION A-A
INCH COMPONENT
Catalog Number
A
A
A
A
A
A
A
A
7Z
7Z
7Z
7Z
7Z
7Z
7Z
7Z
8-URBB05018
8-URBB07518
8-URBB06225
8-URBB07525
8-URBB11237
8-URBB15037
8-URBB11250
8-URBB15050
12
13
14
15
16
15-26
O.D.
.003
.500
.750
.625
.750
1.125
1.500
1.125
1.500
B
Bore
+.0000
-.0002
.1875
.1875
.2500
.2500
.3750
.3750
.5000
.5000
E
Face Width
.125
.125
.187
.187
.281
.281
.281
.281
.375
.375
.500
.500
.875
.875
.875
.875
.010
ROLLERS URETHANE, POLYMER BEARING

URETHANE SURFACE
WITH POLYMER BEARING
R
Inch
MATERIAL:

Sleeve - Aluminum Alloy
Bearing - M250 Polymer
T
1
2
3
ALUMINUM SLEEVE
BEARING
(2X)
F1
4
5
C1 F O.D.
C
ROLLER
* NO CHAMFER
BOTH SIDES
SECTION A-A
7
8
INCH COMPONENT
Catalog Number
A
A
A
A
A
*A
A
A
A
A
A
A
7ZB5-URG05025A
7ZB5-URG05025B
7ZB5-URG05025C
7ZB5-URG06737
7ZB5-URG07537
7ZB5-URG08137
7ZB5-URG09237
7ZB5-URG11237A
7ZB5-URG11237B
7ZB5-URG19837
7ZB5-URG19850A
7ZB5-URG19850B
O.D.
.500
.500
.500
.672
.750
.813
.922
1.125
1.125
1.988
1.988
1.988
B
Bore
.1250 +.0030
+.0012
.2500 +.0039
+.0016
.3750 +.0039
+.0016
E
Face
Width
.010
.250
.718
.500
.250
.500
.500
.484
.438
.688
.688
.750
1.000
F1
L
F
C
C1
Flange Sleeve
Bearing Flange Thickness
Sleeve
Length
Dia.
I.D.
O.D.
Ref.
.1250
.1875
.1250
.1250
.1250
.1250
.1250
.1250
.1250
.1250
.1875
.1875
.360
.360
.360
.560
.560
.560
.560
.560
.560
.625
.625
.625
.047
.047
.047
.047
.047
.047
.047
.047
.047
.062
.062
.062
.250
.250
.250
.375
.375
.375
.375
.375
.375
.375
.625
.625
.344
.344
.344
.500
.500
.500
.688
.500
.500
1.375
1.375
1.375
9
10
11
12
* Catalog Number A 7ZB5-URG08137 has .062 x 45 chamfer on both sides.
13
14
15
15-27
16
I
R
ROLLERS NEOPRENE, POLYMER BEARING

NEOPRENE SURFACE
WITH POLYMER BEARING
Inch
MATERIAL:
Roller - Neoprene 60 Durometer, Black

Sleeve - Aluminum Alloy
Bearing - M250 Polymer
1
2
L
.047 REF.
ALUMINUM SLEEVE
BEARING
(2X)
C1
O.D.
ROLLER
*NO CHAMFER
BOTH SIDES
SECTION A-A
7
8
9
10
INCH COMPONENT
11
12
13
14
Catalog Number
A 7ZB5-IRG05025B
*A
A
A
A
A
A
A
7ZB5-IRG06737
7ZB5-IRG07537
7ZB5-IRG08137
7ZB5-IRG09237
7ZB5-IRG11237A
7ZB5-IRG11237B
7ZB5-IRG19837
B
Bore
E
Face
Width
.010
L
Bearing
Length
F
Flange
Dia.
C
Sleeve
I.D.
C1
Sleeve
O.D.
.500
.1250 +.0030
+.0012
.718
.1875
.360
.250
.344
.2500 +.0039
+.0016
.250
.500
.500
.484
.438
.688
.688
.1250
.1250
.1250
.1250
.1250
.1250
.1250
.560
.560
.560
.560
.560
.560
.560
.375
.375
.375
.375
.375
.375
.375
.500
.500
.500
.688
.500
.500
1.375
.672
.750
.813
.922
1.125
1.125
1.988
* Catalog Number A 7ZB5-IRG06737 has .062 x 45 chamfer on both sides.
15
16
O.D.
15-28
ROLLERS SINTERED BRONZE BEARING

WITH SINTERED BRONZE BEARING
NEOPRENE OR URETHANE SURFACE
R
Inch
MATERIAL:
Roller - Neoprene or Urethane 60 Durometer

Sleeve - Aluminum
Bearing - Sintered Bronze
T
1
2
Fig. 1
Fig. 2
SINTERED BRONZE
BEARING
3
B
4
O.D.
C G
SLEEVE
Fig. 1
With Chamfer
E
NEOPRENE OR URETHANE
VULCANIZED TO SLEEVE
F
O.D.
SINTERED BRONZE
BEARING
C G
SLEEVE
URETHANE
VULCANIZED TO SLEEVE
Fig. 2
Without Chamfer
10
INCH COMPONENT
Catalog Number
Neoprene
A
A
A
A
A
A
A
A
A
*A
7Z
7Z
7Z
7Z
7Z
7Z
7Z
7Z
7Z
7Z
5-IR0512
5-IR0625
5-IR0718
5-IR0721
5-IR0825
5-IR0925
5-IR1015
5-IR1125
5-IR1125W
5-IR1937
Fig.
1
1
1
1
1
1
1
1
1
1
Urethane
A
A
A
A
A
A
A
A
A
A
7Z
7Z
7Z
7Z
7Z
7Z
7Z
7Z
7Z
7Z
5-UR0512
5-UR0625
5-UR0718
5-UR0721
5-UR0825
5-UR0925
5-UR1015
5-UR1125
5-UR1125W
5-UR1937
Fig.
2
2
2
2
1
2
2
2
2
2
O.D.
1/2
43/64
3/4
3/4
13/16
59/64
1-3/32
1-1/8
1-1/8
1.988
B
Bore
+.0015
-.0000
1/8
1/4
3/16
7/32
1/4
1/4
5/32
1/4
1/4
E
Face
Width
.010
23/32
1/4
1/2
1/2
1/2
31/64
9/16
7/16
11/16
.687
C
Dia.
G
Dia.
1/4
3/8
3/8
7/16
3/8
3/8
25/64
3/8
3/8
3/8
11/32
1/2
1/2
1/2
1/2
11/16
1/2
1/2
1/2
1-3/8
1/32
1/32
1/64
1/64
1/64
1/32
1/32
1/32
1/32
1/64
1/64
3/32
1/32
1/32
* Supplied less bearing.

Urethane Idler Rollers will be supplied with chamfer until present stock is depleted.
After depletion, they will be sold without chamfer except for catalog number A 7Z 5-UR0825.
11
12
13
14
15
15-29
16
IDLERS
ALL STAINLESS STEEL CONSTRUCTION
R
T
MATERIAL:
Shaft - 303 Stainless Steel

Bearing - 440C Stainless Steel
Hardware - 300 Series Stainless Steel
Inch
1
2
3
E
5
6
7
8
9
10
INCH COMPONENT
Catalog Number
A
A
A
A
A
A
A
A
A
A
A
A
7Y
7Y
7Y
7Y
7Y
7Y
7Y
7Y
7Y
7Y
7Y
7Y
5-IS3118
5-IS3718
5-IS5018
5-IS3725
5-IS5025
5-IS6225
5-IL3118
5-IL3718
5-IL5018
5-IL3725
5-IL5025
5-IL6225
11
12
13
14
15
16
1/2
9/16
15-30
1.25
1.25
1.25
1.25
1.25
1.25
1.75
1.75
1.75
1.75
1.75
1.75
.500
.500
.500
.500
.500
.500
1.000
1.000
1.000
1.000
1.000
1.000
D
Shaft Dia.
+.0000
-.0002
.1872
.1872
.1872
.2497
.2497
.2497
.1872
.1872
.1872
.2497
.2497
.2497
E
Dia.
3/8
1/2
5/8
1/2
5/8
3/4
3/8
1/2
5/8
1/2
5/8
3/4
LOW COST IDLERS

STAINLESS STEEL HOUSING
R
Inch
MATERIAL:

Housing - 303 Series Stainless Steel
T
1
2
3
1/2
9/16
INCH COMPONENT
Catalog Number
*S7AYPA-05020303
S7AYPA-05020304
S7AYPA-05020404
S7AYPA-05020406
S7AYPA-07040304
S7AYPA-07040305
S7AYPA-07040406
1.25
1.25
1.25
1.25
1.75
1.75
1.75
.500
.500
.500
.500
1.000
1.000
1.000
D
Shaft Dia.
+.0000
-.0002
.1872
.1872
.2497
.2497
.1872
.1872
.2497
E
Dia.
3/8
1/2
1/2
3/4
1/2
5/8
3/4
* Retaining ring clearance diameter exceeds idler O.D.
7
8
9
10
11
12
13
14
15
15-31
16
I
R
IDLER ROLLERS
SOLID
RIBBED
Inch
MATERIAL:

Roller - Black Polyether, 57A Durometer
1
2
3
1
4
O.D.
1/2
Fig. 1 Solid
CENTERS PROVIDED ON
BOTH ENDS FOR
MACHINING ALTERATIONS
L
1/8 (TYP)
8
Fig. 2 Ribbed
9
10
11
12
13
14
15
16
INCH COMPONENT
Catalog Number *
A
A
A
A
A
A
A
A
A
A
7Z
7Z
7Z
7Z
7Z
7Z
7Z
7Z
7Z
7Z
5-SR07137
5-SR10137
5-SR10187
5-RR07112
5-RR07137
5-RR07162
5-RR07187
5-RR10137
5-RR10187
5-RR10212
Fig.
No.
O.D.
1
1
1
2
2
2
2
2
2
2
.750
1.000
1.000
.750
.750
.750
.750
1.000
1.000
1.000
D
Dia.
+.0000
-.0002
.2497
.3122
.3122
.2497
.2497
.2497
.2497
.3122
.3122
.3122
L
Length
No.
of
Ribs
1-3/8
1-3/8
1-7/8
1-1/8
1-3/8
1-5/8
1-7/8
1-3/8
1-7/8
2-1/8
Solid
Solid
Solid
5
6
7
8
6
8
9
NOTE: Roller O.D. concentric to shaft within .002 T.I.R. max. O.D. has a cast surface for maximum frictional properties.
Minimum purchase is 10 pcs.
Large quantities available on special order.
15-32
FEED ROLLERS
URETHANE SURFACE
WITHOUT BEARING
R
Inch
MATERIAL:

Sleeve - Aluminum
All feed rollers supplied with 2 set screws.
T
1
NO CHAMFER
ALUMINUM
SLEEVE
SET SCREW
O.D.
Fig.1
SECTION A-A
4
5
NO CHAMFER
SET SCREW
ALUMINUM SLEEVE
7
O.D.
.625
A
A
A
A
A
A
A
A
A
A
A
7T
7T
7T
7T
7T
7T
7T
7T
7T
7T
7T
5-UR05618
5-UR07518
5-UR06225
5-UR07525
5-UR08725
5-UR10037
5-UR12537
5-UR15037
5-UR15050
5-UR17550
5-UR20050
Fig.
No.
O.D.
.003
1
1
1
1
1
2
1
1
1
1
1
.562
.750
.625
.750
.875
1.000
1.250
1.500
1.500
1.750
2.000
B
Bore
+.0005
-.0000
.1875
.1875
.2500
.2500
.2500
.3750
.3750
.3750
.5000
.5000
.5000
Fig.2
10
SECTION A-A
INCH COMPONENT
Catalog Number
D
E
E
Face
Width
.010
.250
.250
.375
.375
.375
.375
.375
.375
.500
.500
.500
D
Hub
Proj.
G
Sleeve
O.D.
Set
Screw
.250
.250
.250
.250
.250
.375
.375
.375
.500
.500
.500
.125
.125
.125
.125
.125
.187
.187
.187
.250
.250
.250
.437
.437
.500
.500
.500
.750
.812
1.000
1.000
1.250
1.375
#4-40
#4-40
#6-32
#6-32
#6-32
#10-32
#10-32
#10-32
1/4-20
1/4-20
1/4-20
11
12
13
14
15
15-33
16
I
R
FEED ROLLERS
WITHOUT BEARING
URETHANE SURFACE
MATERIAL:
Inch

Sleeve - Aluminum
Fig. 1
Fig. 2
ALUMINUM SLEEVE
NO CHAMFER
3
O.D.
SECTION A-A
Fig. 1 Without Chamfer
.062 X 45 CHAMFER
(BOTH ENDS)
ALUMINUM SLEEVE
O.D.
E
B
SECTION A-A
Fig. 2 With Chamfer
10
INCH COMPONENT
11
12
13
14
15
16
Catalog Number
A
A
A
A
A
A
A
A
A
A
A
A
A
7M
7M
7M
7M
7M
7M
7M
7M
7M
7M
7M
7M
7M
5-UR05025A
5-UR05025B
5-UR05025C
5-UR06737
5-UR07537
5-UR07543
5-UR08137
5-UR09237
5-UR11237A
5-UR11237B
5-UR19837
5-UR19850A
5-UR19850B
15-34
Fig.
No.
O.D.
.003
B
Bore
B
Tolerance
1
1
1
1
1
1
2
1
1
1
1
1
1
.500
.500
.500
.672
.750
.750
.813
.922
1.125
1.125
1.988
1.988
1.988
.2500
.2500
.2500
.3750
.3750
.4375
.3750
.3750
.3750
.3750
.3750
.5000
.5000
+.001/-.000
+.0005/-.0000
+.001/-.000
+.0005/-.0000
+.0005/-.0000
+.0005/-.0000
+.0005/-.0000
+.0005/-.0000
+.0005/-.0000
+.0005/-.0000
+.001/-.000
+.001/-.000
+.001/-.000
E
Face
Width
.010
.250
.718
.500
.250
.500
.500
.500
.484
.438
.688
.688
.750
1.000
G
Sleeve
O.D.
.344
.344
.344
.500
.500
.500
.500
.688
.500
.500
1.375
1.375
1.375
FRICTION DRIVE WHEELS

3/16 FACE
MATERIAL:
Body - Acetal
Insert - Brass
Roller - Buna N, 70 Durometer
Inch
T
1
2
3
11/16
SET SCREW
1/2
1/4
O.D. G
SPOT DRILL
INSERT
ROLLER
9/64
INCH COMPONENT
Catalog Number
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
6Z10-1340404
6Z10-1340604
6Z10-1341004
6Z10-1341404
6Z10-1342004
6Z10-1340406
6Z10-1340606
6Z10-1341006
6Z10-1341406
6Z10-1342006
6Z10-1340608
6Z10-1341008
6Z10-1341408
6Z10-1342008
6Z10-1342408
Catalog Number
Replacement O-Ring
A 6R11-040025
A 6R11-040045
A 6R11-040065
A 6R11-040125
A 6R11-04016
A 6R11-04022
B
Bore
O.D.
+.001
-.000
.125
.125
.125
.125
.125
.1875
.1875
.1875
.1875
.1875
.250
.250
.250
.250
.250
5/8
7/8
1-1/8
1-5/8
2-1/8
5/8
7/8
1-1/8
1-5/8
2-1/8
7/8
1-1/8
1-5/8
2-1/8
2-5/8
7
C
Hub
Dia.
G
Dia.
O-Ring
Roller
Ref.
Set
Screw
5/8
5/8
5/8
3/4
1
5/8
5/8
5/8
3/4
1
5/8
5/8
3/4
1
1
.500
.750
1.000
1.500
2.000
.500
.750
1.000
1.500
2.000
.750
1.000
1.500
2.000
2.500
203
207
211
219
224
203
207
211
219
224
207
211
219
224
228
#4-40
#4-40
#4-40
#4-40
#4-40
#4-40
#4-40
#4-40
#4-40
#4-40
#6-32
#6-32
#6-32
#6-32
#6-32
O-Ring
Roller
Ref.
Diameter
I.D.
203
207
211
219
224
228
1/8
1/8
1/8
1/8
1/8
1/8
5/16
9/16
13/16
1-5/16
1-3/4
2-1/4
15-35
8
9
10
11
12
13
14
15
16
CONSTANT FORCE SPRINGS

EXTENSION SPRINGS
MATERIAL:
301 Stainless Steel
Inch
FATIGUE LIFE:
2500 Cycles Minimum
f2
f1
1
E
f1 = INITIAL DEFLECTION TO
REACH RATED LOAD
INCH COMPONENT
Catalog Number
Load
lbf 10%
.37
A 3X50-SH03C10
A 3X50-SH04C14
.49
.66
A 3X50-SH04D14
.83
A 3X50-SH04E14
A 3X50-SH05E15
1.03
1.48
A 3X50-SH06F21
A 3X50-SH06G21
1.97
A 3X50-SH08G28
2.63
3.29
A 3X50-SH08J28
A 3X50-SH10J29
4.12
A 3X50-SH10K29
4.95
5.94
A 3X50-SH12K36
A 3X50-SH12P36
7.92
10.60
A 3X50-SH16P38
16.50
A 3X50-SH20R47
19.80
A 3X50-SH20S47
24.80
A 3X50-SH25S48
A 3X50-SH25U48
33.00
A 3X50-SH31U58
40.90
* Drums are not supplied.
Springs have a hole at both ends.
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
3X50-SH03C10
3X50-SH04C14
3X50-SH04D14
3X50-SH04E14
3X50-SH05E15
3X50-SH06F21
3X50-SH06G21
3X50-SH08G28
3X50-SH08J28
3X50-SH10J29
3X50-SH10K29
3X50-SH12K36
3X50-SH12P36
3X50-SH16P38
3X50-SH20R47
3X50-SH20S47
3X50-SH25S48
3X50-SH25U48
3X50-SH31U58
D2
Drum
Dia.*
Free I.D.
Ref.
f1
f2
t
Thickness
W
Width
Band
Length
.261
.349
.349
.349
.436
.523
.523
.697
.697
.873
.873
1.050
1.050
1.400
1.750
1.750
2.180
2.180
2.710
7/32
19/64
19/64
19/64
23/64
7/16
7/16
37/64
37/64
47/64
47/64
7/8
7/8
1-5/32
1-15/32
1-15/32
1-53/64
1-53/64
2-17/64
.39
.52
.52
.52
.65
.78
.78
1.06
1.06
1.31
1.31
1.56
1.56
2.10
2.60
2.62
3.27
3.27
4.00
8
12
12
12
12
18
18
24
24
24
24
30
30
30
36
36
36
36
42
.003
.004
.004
.004
.005
.006
.006
.008
.008
.010
.010
.012
.012
.016
.020
.020
.025
.025
.031
3/16
3/16
1/4
5/16
5/16
3/8
1/2
1/2
5/8
5/8
3/4
3/4
1
1
1-1/4
1-1/2
1-1/2
2
2
10
14
14
14
15
21
21
28
28
29
29
36
36
38
47
47
48
48
58
MOUNTING HOLE SPECIFICATIONS

Fig.
Catalog Number
E
No.
(Ref.)
5/32
5/32
7/32
7/32
7/32
1/4
1/4
3/8
3/8
7/16
7/16
1/2
3/4
3/4
7/8
7/8
1-1/8
1-1/8
1-1/4
R
Radius
5/32 **
5/32 **
1/2
7/32 **
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
9/16
9/16
1-1/32
1-1/32
1-1/32
1-1/32
1-1/32
A
Dia.
.095
.095
.131
.131
.131
.191
.191
.191
.191
.191
.191
.191
.193
.193
.193
.256
.256
.256
.256
3/32
3/32
3/16
3/16
3/16
11/32
11/32
11/32
11/32
11/32
11/32
11/32
3/8
3/8
3/8
5/8
5/8
5/8
5/8
.766
.766
.766
.766
FREE
I.D.
f2 = MAXIMUM WORKING DEFLECTION
D2
5
6
7
8
9
11
B
W
C
R
Fig. 2 Double Hole
** Fig. 3
Radius Supplied
Present after Present Stock
Radius
is Depleted
5/32
7/32
10
R
W
Fig. 1 Single Hole
A
1/2
1/2
12
13
14
15
** To be replaced when present stock is depleted.
15-36
REV: 2.2.12 mh
16

EXTENSION SPRINGS
MATERIAL:
301 Stainless Steel
Inch
FATIGUE LIFE:
13000 Cycles Minimum
f2
f1
These springs provide the design

engineer with a convenient choice
of sizes for use in developing
product prototypes and small
production quantities. Springs
are supplied with free ends
punched for fastening as
D2
indicated in the drawings.
1
E
REACH RATED LOAD
Load
lbf 10%
.32
A 3X50-SK04D15
.40
A 3X50-SK04E15
.49
A 3X50-SK05E16
.71
A 3X50-SK06F23
.95
A 3X50-SK06G23
1.26
A 3X50-SK08G30
A 3X50-SK08J30
1.58
1.98
A 3X50-SK10J32
2.37
A 3X50-SK10K32
2.84
A 3X50-SK12K40
3.79
A 3X50-SK12P40
4.74
A 3X50-SK15P42
5.69
A 3X50-SK18P47
9.48
A 3X50-SK20S52
11.90
A 3X50-SK25S57
15.80
A 3X50-SK25U57
19.60
A 3X50-SK31U68
Spring has a hole at both ends.
D2
I.D.
Drum Free
Ref.
Dia.*
.533
.533
.665
.798
.798
1.060
1.060
1.330
1.330
1.590
1.590
1.990
2.400
2.650
3.330
3.330
4.120

Catalog Number
R
E
Radius
(Ref.)
Fig. 1
A
A
A
A
A
A
A
A
A
A
A
A
A
Fig. 2
A
A
A
A
7/16
7/16
9/16
43/64
43/64
7/8
7/8
1-7/64
1-7/64
1-11/32
1-11/32
1-43/64
2
2-7/32
3
3
3-7/16
f1
f2
t
Thickness
W
Width
Band
Length
.80
.80
1.00
1.20
1.20
1.59
1.59
2.00
2.00
2.38
2.38
2.98
3.60
3.97
5.00
5.00
6.18
12
12
12
18
18
24
24
24
24
30
30
30
32
36
36
36
42
.004
.004
.005
.006
.006
.008
.008
.010
.010
.012
.012
.015
.018
.020
.025
.025
.031
1/4
5/16
5/16
3/8
1/2
1/2
5/8
5/8
3/4
3/4
1
1
1
1-1/2
1-1/2
2
2
15
15
16
23
23
30
30
32
32
40
40
42
47
52
57
57
68
A
Dia.
3X50-SK04D15
3X50-SK04E15
3X50-SK05E16
3X50-SK06F23
3X50-SK06G23
3X50-SK08G30
3X50-SK08J30
3X50-SK10J32
3X50-SK10K32
3X50-SK12K40
3X50-SK12P40
3X50-SK15P42
3X50-SK18P47
1/4
1/4
5/16
3/8
3/8
1/2
1/2
5/8
5/8
7/8
7/8
1
1-1/8
7/32 **
7/32 **
7/32 **
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1-1/32**
1-1/32**
1-1/32**
.131
.131
.131
.191
.191
.191
.191
.191
.191
.191
.193
.193
.193
3/16
3/16
3/16
11/32
11/32
11/32
11/32
11/32
11/32
11/32
3/8
3/8
3/8
3X50-SK20S52
3X50-SK25S57
3X50-SK25U57
3X50-SK31U68
1-1/4
1-1/2
1-1/2
2
1-1/32
1-1/32
1-1/32
1-1/32
.256
.256
.256
.256
5/8
5/8
5/8
5/8
.766
.766
.766
.766
1
2
FREE
I.D.
INCH COMPONENT
Catalog Number
4
5
6
7
8
9
10
R
W
Fig. 1 Single Hole
A
11
B
W
12
C
R
Fig. 2 Double Hole
**CHANGE IN RADIUS
Radius Supplied
Radius
is Depleted
7/32
1-1/32
13
14
1/2
9/16
15
15-37
16

EXTENSION SPRINGS
MATERIAL:
301 Stainless Steel
T
1
2
Inch
FATIGUE LIFE:
20000 Cycles Minimum

These springs provide the design
engineer with a convenient choice
of sizes for use in developing
product prototypes and small
production quantities. Springs
are supplied with free ends
punched for fastening as
indicated in the drawings.
f2
f1
REACH RATED LOAD
FREE
I.D.
D2
INCH COMPONENT
4
5
6
7
8
9
10
11
12
13
14
15
16
Catalog Number
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
3X50-SL04D16
3X50-SL05E17
3X50-SL05F30
3X50-SL06F24
3X50-SL06G24
3X50-SL08G31
3X50-SL10J33
3X50-SL12K42
3X50-SL12P42
3X50-SL15P46
3X50-SL15R46
3X50-SL20R54
3X50-SL20S54
3X50-SL25S59
3X50-SL25U59
3X50-SL31U69
Load
lbf 10%
D2
I.D.
Drum Free
Ref.
Dia.*
.631
.787
.750
.947
.947
1.260
1.580
1.900
1.900
2.370
2.370
3.160
3.160
3.960
3.960
4.890
.23
.36
.43
.52
.70
.93
1.46
2.09
2.80
3.50
4.37
5.83
6.99
8.74
11.70
14.40
33/64
21/32
21/32
25/32
25/32
1-3/64
1-21/64
1-37/64
1-37/64
1-63/64
1-63/64
2-5/8
2-5/8
3-19/64
3-19/64
4-5/64
f1
f2
t
Thickness
W
Width
Band
Length
.950
1.180
1.120
1.430
1.430
1.880
2.370
2.870
2.870
3.560
3.560
4.750
4.750
6.000
6.000
7.300
12
12
25
18
18
24
24
30
30
30
30
36
36
36
36
42
.004
.005
.005
.006
.006
.008
.010
.012
.012
.015
.015
.020
.020
.025
.025
.031
1/4
5/16
3/8
3/8
1/2
1/2
5/8
3/4
1
1
1-1/4
1-1/4
1-1/2
1-1/2
2
2
16
17
30
24
24
31
33
42
42
46
46
54
54
59
59
69

Springs have a hole at both ends.

Catalog Number
(Ref.)
Fig. 1
A
A
A
A
A
A
A
A
A
A
A
A
Fig. 2
A
A
A
A
R
Radius
A
Dia.
3X50-SL04D16
3X50-SL05E17
3X50-SL05F30
3X50-SL06F24
3X50-SL06G24
3X50-SL08G31
3X50-SL10J33
3X50-SL12K42
3X50-SL12P42
3X50-SL15P46
3X50-SL15R46
3X50-SL20R54
5/16
13/32
5/16
1/2
1/2
5/8
3/4
7/8
7/8
1
1
1-1/2
7/32 **
7/32 **
7/32 **
1/2
1/2
1/2
1/2
1/2
1-1/32**
1-1/32**
1-1/32
1-1/32
.131
.131
.187
.191
.191
.191
.191
.191
.193
.193
.193
.193
3/16
3/16
5/16
11/32
11/32
11/32
11/32
3/8
3/8
3/8
3/8
3/8
3X50-SL20S54
3X50-SL25S59
3X50-SL25U59
3X50-SL31U69
1-1/2
1-1/2
1-1/2
2
1-1/32
1-1/32
1-1/32
1-1/32
.256
.256
.256
.256
5/8
5/8
5/8
5/8
.766
.766
.766
.766
15-38
R
W
Fig. 1 Single Hole
A
B
W
C
R
Fig. 2 Double Hole
**CHANGE IN RADIUS
Radius Supplied
Radius
is Depleted
7/32
1-1/32
1/2
9/16
NEG'ATOR SPRING MOTORS

2500 CYCLES LIFE
MATERIAL:
301 Stainless Steel
Inch
FATIGUE LIFE:
2500 Cycles Minimum
Neg'ator Spring Motors are made of

301 Stainless Steel and are shipped as shown,
to be mounted on drums (not supplied) of the
recommended diameters.
T
1
T
D2
3
D3
D4
B
C
D1
INNER END
OUTER END
W
E A
30 1
ENDS OF STOCK MOTOR

SPRINGS ARE FORMED AS
"TONGUES" FOR MOUNTING.
INCH COMPONENT
Catalog Number
A
A
A
A
A
A
A
A
A
A
3X51-20002
3X51-20004
3X51-20005
3X51-20006
3X51-20007
3X51-20008
3X51-20009
3X51-20010
3X51-20011
3X51-20012
Torque*
lbf in.
+10%
.13
.34
.65
1.13
1.81
2.65
3.87
5.50
7.06
9.00
Recommended
Drum Sizes
Recommended
Flange Diameter
D3
Output
.56
.89
1.12
1.34
1.57
1.78
2.01
2.23
2.46
2.67
D2
Storage
.32
.51
.64
.77
.90
1.03
1.16
1.28
1.41
1.53
D4
Output
.69
1.11
1.38
1.66
1.94
2.21
2.48
2.76
3.04
3.32
D1
Storage
.51
.82
1.02
1.23
1.45
1.64
1.86
2.04
2.27
2.45
T
W
Thickness Width
Length
.250
.250
.312
.375
.437
.500
.562
.625
.687
.750
.002
.004
.005
.006
.007
.008
.009
.010
.011
.012
44
70
87
106
124
144
159
175
195
210
* Torque ratings listed are for the "unwinding" portion of cycle.

In long-running motors (over 15 turns), torque at fully wound end of cycle will be slightly higher.
Catalog Number
(Ref.)
A
A
A
A
A
A
A
A
A
A
3X51-20002
3X51-20004
3X51-20005
3X51-20006
3X51-20007
3X51-20008
3X51-20009
3X51-20010
3X51-20011
3X51-20012
Spring End Details

A
Dia.
.093
.093
.120
.120
.120
.172
.172
.172
.172
.172
.750
.750
1.260
1.260
1.260
1.500
1.500
1.500
1.500
1.500
.125
.125
.187
.187
.187
.250
.250
.250
.250
.250
.078
.078
.105
.105
.105
.156
.156
.156
.156
.156
.156
.156
.210
.210
.210
.317
.317
.317
.317
.317
8
9
10
11
Number
of
Turns
12
.69
1.11
1.38
1.66
1.95
2.21
2.48
2.76
3.04
3.32
20
20
20
20
20
20
20
20
20
20
13
15-39
14
15
16
I
R
T
1
SPRING-POWERED REELS
FOR POINT-OF-PURCHASE DISPLAYS
COMPACT SIZE
RETRACTABLE CABLE
Inch
MATERIAL:
Case - Nylon, Black or White

Cable - Stainless Steel, Nylon Coated
Cable End Terminal - Eyelet for #8 screw (.175 in.)
Spring - Stainless Steel
SPECIFICATION:
2
3
Endurance: Min. Number of Cycles: 10,000
MODIFICATIONS:
Other attachment plates, cable or end

attachments are available on special request.
4
5
.13
6
7
.10
.49
1.08
1.08
1.76
1.87
.55
1.60
1.37
.58
1.87
.151
Fig. 1
.115
.115
Fig. 2
Fig. 3
8
INCH COMPONENT
9
10
11
12
Catalog Number
Nominal
Max. Deflection
in.
Fig. 1 Cable .018 in. Stainless Steel, Clear Nylon Coated to .024 in.
Black
26
A 3Z55-A04
Fig. 2 Cable .027 in. Stainless Steel, Black Nylon Coated to .034 in.
Black
42
A 3Z55-B03
Fig. 3 Cable .018 in. Stainless Steel, Clear Nylon Coated to .024 in.
White
60
A 3Z55-C03
White
50
A 3Z55-C07
White
40
A 3Z55-C12
13
14
NEW
15
16
Case
Color
15-40
Nominal Retracting
Load ozf
at Max. Extension
Cable Min.
Breaking Strength
40
90
3
7
12
40
40
40
lbf
SPRING-POWERED REELS CABLE ATTACHMENT

CABLE END FITTING
SECURES PRODUCT
UNOBTRUSIVELY TO DISPLAY
SAVES ON ASSEMBLY COST
ONE-PIECE CONSTRUCTION
R
Inch
MATERIAL:
ABS Plastic, Black
MODIFICATIONS:
Other cable attachment methods

available on special request include:
1. Plastic attachment plate with or
without white adhesive tape.
2. Stainless Steel attachment plate
with adhesive tape.
3. Two plastic attachment plates
one stationary & one sliding.
.025 x 45
2
CHANNEL
3
POCKET
INCH COMPONENT
Catalog Number
.200
A 3Z55-CBLATT
1.10
NOTE: Includes double-sided tape.
To Assemble:
1. Place ring terminal into slot.
7
8
2. Holding the end of the

terminal, guide cable
through channel.
9
10
3. Depress terminal into

pocket.
11
12
4. Attach double-sided
tape.
13
14
15
NEW
15-41
16
I
R
SPIR'ATOR SPRING-POWERED REELS

BASE-MOUNTED
CLOSED CASE
MATERIAL:
T
1
2
Inch
Cable - .018, 7 x 7 Stainless Steel, Nylon Coated to .024

Drum & Base - ABS, Closed Case
APPLICATIONS:
Counterbalances
Door closers
Cable retractors
Hose retrievers
Tool head returns
Cabinet & furniture components
Other long-motion functions
.29
.90
1-7/8
1.8
1-3/16
6
7
11/16
INCH COMPONENT
Catalog Number
A
A
A
A
3Z53-ML45751
3Z53-ML45752
3Z53-ML45753
3Z53-ML45754
11
12
13
14
15
15-42
Cable
Approx.
Length
in.
42
52
64
84
Force
lbs
2.0
1.5
1.0
.5
.9R
CLEARANCE FOR
#10 STUD
.238
2 HOLES
1/4 R (2X)
5/8 R (2X)
16
5/32 R
1
7/16
APPROX.
2-3/8
10
1-1/2
1/4
1/4
11/16
APPROX.
1/8
7/16
APPROX.

BASE-MOUNTED
MATERIAL:
Cable - .024 7 x 3 Stainless Steel

Drum & Base - Steel, Zinc Coated
Inch
APPLICATIONS:
Counterbalances
Door closers
Cable retractors
Hose retrievers
Tool head returns
1
Each is equipped with a cable with a looped end.
2 1/32
13/16
1/4
7/8 APPROX.
9/16 APPROX.
1-3/16
2-3/8
1-7/8
1-5/8
1/4
CLEARANCE HOLE
FOR #10 SCREW
.238
2 HOLES
9/16 APPROX.
1-1/2
51/64
.05 THICK
INCH COMPONENT
*A
A
A
A
Cable
Approx. Retracting
Force
Length
lbs
Catalog Number
in.
64
42
52
84
3Z53-ML1565
3Z53-ML3949
3Z53-ML3946
3Z53-ML3943
.75
1.8
1.2
.5
10
* .024 uncoated, the others will be coated with

a nylon jacket.
11
EXTENDING
RETRACTING
12
FORCE
ML-3949
13
ML-3946
ML-1565
14
15
ML-3943
Charts are for reference only
EXTENSION
15-43
16
I
R
ARBOR-MOUNTED
STEEL OR PLASTIC CASE
MATERIAL: Spring-Powered Reel
T
1
Inch
Cable - 7x7 Construction, Preformed

Galvanized Steel, Nylon Coated
Case - ABS Plastic or Galvanized Steel
Arbor - Delrin
Spring - High Carbon Steel
Steel, Plated
SPECIFICATION:
MODIFICATION:
Square clearance hole thru for

mounting on square stud.
7
8
9
10
11
INCH COMPONENT
Catalog Number
ABS Plastic
Case
A
A
A
*A
A
3Z55-PR310B
3Z55-PR315B
3Z55-PR320B
3Z55-PR325B
3Z55-PR425B
Galvanized
Steel Case
A
A
A
A
A
A
3Z55-MR315B
3Z55-MR320B
3Z55-MR325B
3Z55-MR425B
3Z55-MR433D
3Z55-MR433E
A
Dia.
B
Dia.
C
Arbor
Length
D
Square
2-7/8
2-7/8
2-7/8
2-7/8
4-1/8
4-1/8
4-1/8
3-3/8
3-3/8
3-3/8
3-3/8
5
5
5
1-1/8
1-1/8
1-1/8
1-1/8
1-1/8
1-3/8
1-5/8
5/16
5/16
5/16
5/16
5/16
7/16
7/16

20
18
Square Stud Catalog Number
16
A 3C55-0771
A 3C55-0546
14
D
5/16
7/16
12
E
1-7/16
2-15/64
10
F
1-3/16
1-31/32
Thread
1/4-20
3/8-16
8
6
E
4
2
0
THREAD
F
D
.0
SPRING CLIP (INCLUDED)
SQ.
EXTENDING
RETRACTING
.5
14
A 3Z55-PR325B
DEFLECTION (feet)
EXTENDING
RETRACTING
LOAD (lbf)
50
40
A 3Z55-MR433E
30
20
0
0
15-44
3D
MR43
5A 3Z5
10
NEW
15
120
78
54
42
162
120
120
1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 6.5
60
NOTE: These are typical curves, not maximum

and minimum values.
Length
in.
A 3Z55-PR315B
70
12
16
Cable
Diameter
Nylon
Coated
1/16
1/16
1/16
1/16
3/32
3/32
3/32
A 3Z55-PR320B
80
13
C
OVERALL LENGTH
INCLUDING ARBOR
LOAD (lbf)
A
B
Different cable size, length or end

connections are available on special order.
4
5
1/4 CLEARANCE HOLE
D
SQUARE
HOLE
MATERIAL: Square Stud
1.0
2.0
3.0
A 3Z55-PR425B
A 3Z55-PR310B
11.0 13.0 15.0
4.0
6.0
8.0
10.0 12.0
14.0
DEFLECTION (feet)
5.0
7.0
9.0
ARBOR-MOUNTED
STEEL CASE
MATERIAL:
Inch
Spring-Powered Reel:
Cable - 3/32 Galvanized Steel, Nylon Coated to 1/8
Case - Steel, Powder Coated
Arbor - Delrin
Square Stud - Steel, Plated
T
1
1/4 CLEARANCE HOLE

D
2
3
A
B
INCH COMPONENT
Catalog Number
A
Dia.
B
Dia.
D*
Square
A
A
A
A
A
A
A
2-7/8
2-7/8
2-7/8
2-7/8
4-1/8
5
2-7/8
3-3/8
3-3/8
3-3/8
3-3/8
5
6
3-3/8
1
1
1
1
1-5/8
1-5/8
1
5/16
5/16
5/16
5/16
7/16
7/16
5/16
3Z53-ML1710
3Z53-ML1851
3Z53-ML1881
3Z53-ML1912
3Z53-ML2800
3Z53-ML2801
3Z53-ML3976
Cable
Length
Retracting
Force
90
60
123
60
120
108
60
3.5
10.0
2.0
14.0
24.0
35.0
6.0
in.
lbs
* Square clearance hole thru for mounting on square stud.

This reel has three .251 holes equally spaced on a 5.500 BC through flanges on both sides for prewind purpose.
B
Catalog Number **
Square Stud
A 3C53-P11404
A 3C53-P10152
A
Square
5/16
7/16
1-9/32
1-29/32
Thread
A
SQ.
1-1/32
1-21/32
1/4-20
3/8-16
5
6
7
8
THREAD
C
SPRING CLIP
(INCLUDED)
9
10
EXTENDING
11
RETRACTING
ML-2801
FORCE
12
ML-2800
ML-1912
13
ML-1851
ML-3976
ML-1710
14
ML-1881

EXTENSION
15
15-45
16
NEG'ATOR SPRING MOTOR ASSEMBLIES

BASE-MOUNTED
R
T
1
2
MATERIAL:
Base ML1448 - Stainless Steel

ML2900 Series - Steel, Zinc Plated
Drums ML1448 - Nylon
ML2900 Series - Celcon or Nylon
Springs (All) - 301 Stainless Steel, Hi-Yield
Cable ML1448 - .015 Nylon Monofilament
ML2900 Series - .024 Stainless Steel, Uncoated
Inch
Spring motor assemblies provide linear and rotary output

as product components of experimental prototypes.
A constant torque motor consists of a Neg'ator band,
take-up drum, larger output drum, baseplate and cable.
A 3Z52-ML1448
1/4
1/2
1-5/8
6
1/2
5/8
A 3Z52-ML2919 thru 2921

Fig. 1
8
9
A 3Z52-ML2917 and 2918
2-1/2
2-1/2
2-7/8
13/32
.177 (4 MOUNTING HOLES)

Fig. 3
10
1-3/8
11
3/32
Fig. 2
12
13
14
15
16
1-3/16
3-3/4
Side View for Fig. 2 & 3
7/8
INCH COMPONENT
Catalog Number
A
A
A
A
A
A
3Z52-ML1448
3Z52-ML2917
3Z52-ML2918
3Z52-ML2919
3Z52-ML2920
3Z52-ML2921
Fig.
No.
1
2
2
3
3
3
NOTE: Torque and cable loads are nominal.
15-46
Spring
Torque
Cable
Tension
Cable
Length
in.
No.
of
Rev's
Fatigue
Life
(Min.)
.10
.78
1.56
2.33
3.12
3.90
.375
1.000
2.000
3.000
4.000
5.000
36
72
72
72
72
72
20
15
15
15
15
15
3000
7500
2500
4500
2500
2000
lb-in.
lbs

BASE-MOUNTED
MATERIAL:
Base - Steel, Zinc Plated

Drums - Acetal
Springs - 301 Stainless Steel, Hi-Yield
Cable - .031 Galvanized Steel, Nylon Coated to .047
Inch
Spring motor assemblies provide linear and rotary output

as product components of experimental prototypes.
A constant torque motor consists of a Neg'ator band,
take-up drum, larger output drum, baseplate and cable.
T
1
2
1/4
9/16
C B
4
F
.177
(6 MOUNTING HOLES)
1-7/8
1/8
5
6
2-1/4
7
INCH COMPONENT
Catalog Number
A
A
A
A
A
A
A
A
A
3Z52-ML2476
3Z52-ML2478
3Z52-ML2480
3Z52-ML2482
3Z52-ML2484
3Z52-ML2486
3Z52-ML2488
3Z52-ML2490
3Z52-ML2492
Spring
Torque
Cable
Tension
Cable
Length
Endurance
(Min. No.
of Cycles)
in.
No.
of
Rev's
6.65
7.95
11.90
15.50
13.90
10.60
8.06
5.62
3.63
7.5
10.0
15.0
15.0
13.5
10.0
7.5
5.0
3.1
42
37
33
160
160
184
207
235
273
8
7
6
29
29
33
36
40
45
6000
5000
2500
2000
2500
4000
6000
9000
15000
lbf in.
lbf
NOTE: Torque and cable loads are nominal.
Catalog Number
(Ref.)
A
A
A
A
A
A
A
A
A
3Z52-ML2476
3Z52-ML2478
3Z52-ML2480
3Z52-ML2482
3Z52-ML2484
3Z52-ML2486
3Z52-ML2488
3Z52-ML2490
3Z52-ML2492
5
5
5
6-1/4
6-1/4
6-1/4
6-1/4
6-1/4
6-1/4
2-3/4
2-3/4
2-3/4
3-1/4
3-1/4
3-1/4
3-1/4
3-1/4
3-1/4
2-1/4
2-1/4
2-1/4
2-3/4
2-3/4
2-3/4
2-3/4
2-3/4
2-3/4
1-7/8
1-7/8
1-7/8
2-9/16
2-9/16
2-9/16
2-9/16
2-9/16
2-9/16
2-1/4
2-1/4
2-1/4
2-3/4
2-3/4
2-3/4
2-3/4
2-3/4
2-3/4
11/32
11/32
11/32
3/8
3/8
3/8
3/8
3/8
3/8
15-47
10
11
12
13
14
15
16

BRACKET-MOUNTED
R
T
MATERIAL:
Cable - 3/32 Galvanized Steel, Nylon Coated to 1/8

Case, Cable Reel & Mounting Bracket - Steel, Zinc Coated
Inch
APPLICATIONS:
1
2
Counterbalances
Door closers
Cable retractors
Hose retrievers
Tool head returns
Each is equipped with

a cable with a looped end.
63/64
47/64
3/4
3-3/8
5-1/16
1/2 - 13
LIGHT HEX NUT
8-3/4
6
7
8
9
3/16 THICK
2-17/32
1-1/2
INCH COMPONENT
Catalog Number
Cable
Length
Retracting Force
A 3Z53-ML1547
A 3Z53-ML1548
A 3Z53-ML1549
126
126
126
15.0
11.0
8.0
lbs.
in.
10
ML-1547
11
12
FORCE
ML-1548
13
ML-1549
14
EXTENDING
15
16
15-48
EXTENSION
RETRACTING
METAL SHIM STOCK

BRASS, STEEL AND STAINLESS STEEL
FLAT SHEET
EASY-TO-USE
R
Inch
MATERIAL CODE:
B Brass, Half Hard 70/30

C Cold Rolled Steel 1010
S Stainless Steel 302/304
T
1
Priced per box of ten (ten 8 in. x 12 in. sheets of one thickness).
2
3
4
5
INCH COMPONENT
6
Thickness
in.
Catalog Number
** S77
** S77
S77
S77
S77
S77
S77
S77
S77
S77
* S77
.001
.002
.003
.004
.005
.007
.010
.012
.015
.020
.030
0Y-001SET
0Y-002SET
0Y-003SET
0Y-004SET
0Y-005SET
0Y-007SET
0Y-010SET
0Y-012SET
0Y-015SET
0Y-020SET
0Y-030SET
8
9
10
* Not available in Cold Rolled Steel or Stainless Steel.

** Not available in Cold Rolled Steel.
11
You can also purchase Metal Shim Stock in an assortment package of one sheet per thickness.
This package is sold as 8 in. x 12 in. sheets.
Priced per box.
12
INCH COMPONENT
Catalog Number
S77B0Y-ASSORT
S77C0Y-ASSORT
S77S0Y-ASSORT
Material
Sheets Per Box
Brass
Cold Rolled Steel
Stainless Steel
11
9
10
13
14
Does not include .030 thickness.

Does not include .002 & .030 thickness.
15
NOTE: Aluminum and Plastic Shim Stock also available.
15-49
16
I
R
T
ALUMINUM SHIM STOCK

COLOR CODED THICKNESS
FLAT SHEET
EASY-TO-USE
Inch
Priced per box of ten (ten sheets of one thickness).
1
2
3
4
5
INCH COMPONENT
6
7
8
9
10
11
12
13
Catalog Number
6 in. x 12 in.
Sheets
12 in. x 24 in.
Sheets
6 in. x 24 in.
Sheets
S77A6Y-0015SET
S77A6Y-001SET
S77A3Y-002SET
S77A3Y-003SET
S77A3Y-004SET
S77A3Y-005SET
S77A3Y-007SET
S77A3Y-010SET
S77A3Y-016SET
S77A3Y-020SET
S77A3Y-025SET
S77A3Y-031SET
S77A6Y-002SET
S77A6Y-003SET
S77A6Y-004SET
S77A6Y-005SET
S77A6Y-007SET
S77A6Y-010SET
S77A6Y-016SET
S77A6Y-020SET
S77A6Y-025SET
S77A6Y-031SET
15
16
Color
.0015
.001
.002
.003
.004
.005
.007
.010
.016
.020
.025
.031
Natural
Natural
Red
Green
Tan
Blue
Natural
Brown
Pink
Yellow
White
Coral
You can also purchase Aluminum Shim Stock in an assortment package of one sheet per thickness.
This package of 10 sheets (10 colors) is available in two sizes as shown below.
Priced per box.
INCH COMPONENT
Catalog Number
14
Thickness
in.
S77A3Y-ASSORT
S77A6Y-ASSORT
Size
in.
12 x 24
6 x 24
NOTE: Brass, Steel, Stainless Steel and Plastic Shim Stock also available.
15-50
PLASTIC SHIM STOCK

COLOR CODED THICKNESS
EASY-TO-USE
SIZE CODE:
Inch
Using data below, insert desired size

code in the box in the catalog number:
1 5 in. x 20 in.
2 10 in. x 20 in.
3 12 in. x 24 in.
4 20 in. x 20 in.
T
1
Available on special request:

.00075 Gold
.040 Clear
.050 Clear
.060 Clear
Priced per individual sheet.
3
4
5
INCH COMPONENT
Catalog Number
S77P
S77P
S77P
S77P
S77P
S77P
S77P
S77P
S77P
S77P
S77P
S77P
S77P
S77P
Y-0005
Y-001
Y-0015
Y-002
Y-003
Y-004
Y-005
Y-0075
Y-010
Y-0125
Y-015
Y-020
Y-025
Y-030
6
Thickness
in.
Color
.0005
.001
.0015
.002
.003
.004
.005
.0075
.010
.0125
.015
.020
.025
.030
Silver
Amber
Purple
Red
Green
Tan
Blue
Transp. Matte
Brown
Black
Pink
Yellow
Solid White
Coral
7
8
9
10
11
You can also purchase Plastic Shim Stock in an assortment package of one sheet per thickness.
This package of 14 sheets (14 colors) is available in three sizes as shown below.
12
Priced per box.
INCH COMPONENT
Catalog Number
S77P1Y-ASSORT
S77P2Y-ASSORT
S77P4Y-ASSORT
13
Size
in.
14
5 x 20
10 x 20
20 x 20
15
NOTE: Aluminum, Brass, Steel, and Stainless Steel Shim Stock also available.
15-51
16
MISCELLANEOUS TOOLS
R
Inch
T
1
2
3
4
5
6
7
INCH COMPONENT
Catalog Number
Fig. 1
A 4T15-INSPMR
A 4Z15-SCDRST
A
A
A
Fig. 2
A
4T15-PLAHAM
4T15-STSCAL
4T15-TWEZRST
9Z80-LUBKIT
8
9
10
11
12
13
14
15
16
Fig. 2
Fig. 1
15-52
Item
Description
Inspection Mirror
3/4 diameter mirror with handle

Set of assorted small precision instrument screw drivers in
plastic case and cover
Instrument style to prevent marking faces of working surface
6 in. Stainless Steel 1/32 & 1/64 grads with decimal chart
Stainless Steel for instrument parts
Instrument Screwdrivers
Plastic Hammer
Steel Scale
Tweezers
Lube Kit
1 pt. Tellus 23 oil & 1 lb. Alvania 2 grease
LUBRICANTS
MOLY GREASE (HEAVY-DUTY)
DESCRIPTION:
Heavy-duty petroleum-based grease, compounded with

molybdenum disulfide and other special additives to
obtain superior lubrication. Recommended for use where
higher pressures or temperatures would cause breakdown
of protective film formed by ordinary grease.
Inch
T
1
INCH COMPONENT
Catalog Number
Aerosol
Container Size
A 9L80-0816
16 oz.
2
3
GEAR GREASE (HEAVY-DUTY)
DESCRIPTION:
High-performance lubricant with excellent mastic and

wicking properties. Has outstanding water and pressure
resistance. Takes extreme pressure loads. Unaffected by
temperature extremes. Protects against rust and corrosion.
Noncorrosive; easy to apply in hard-to-reach areas.
5
6
INCH COMPONENT
Catalog Number
Aerosol
Container Size
A 9L80-0914
14 oz.
7
8
9
10
11
12
13
14
15
15-53
16
LUBRICANTS
SILICONE LUBRICANT (GENERAL PURPOSE)
DESCRIPTION:
Greaseless lubrication that stops anything from sticking.

Will not gum or form unwanted residues. The unique
combination of properties associated with silicone fluids
makes them suitable for plastic and rubber lubrication, as
dampening or heat transfer fluids. Flash point greater than
600F. Pour point -58F. Specific gravity 1.450. Acid and
alkaline resistance excellent. Moisture and oxidation
resistance excellent.
INCH COMPONENT
Catalog Number
Aerosol
Container Size
A 9L80-0616
16 oz.
4
5
MOLY-OIL (HEAVY-DUTY)
DESCRIPTION:
Heavy-duty petroleum based lubricant containing

molybdenum disulfide and other special additives to give
superior lubrication. Recommended for use where higher
pressures or temperatures would cause breakdown of
protective film formed by ordinary oils.
INCH COMPONENT
8
9
10
11
12
13
14
Catalog Number
Aerosol
Container Size
A 9L80-0714
14 oz.
DRY FILM LUBRICANT (TFE)

DESCRIPTION:
Lubricant and release agent. Nonstaining; chemically inert.

Offers extreme adhesion well beyond normal break-in
periods and release qualities up to 500F. Forms a slippery,
dry, translucent film on plastics, rubber, wood and metals.
Ideal for parts that are impractical to relubricate after
assembly such as electrical equipment, timing devices, etc.
INCH COMPONENT
Catalog Number
Aerosol
Container Size
A 9L80-1116
14 oz.
For engineering assistance with all SDP components

15
16
15-54
Inch
CLEANING OIL & LUBRICANTS

PENETRATING & CLEANING OIL
DESCRIPTION:
Low surface tension gives complete penetration. This

specially prepared penetrating oil is formulated with two
types of carrier solvents that permit the oil to travel
easily into small cracks and along threaded fasteners for
fast, thorough action. The aerosol jet spray applicator
permits accurate coverage. Cleans and removes light rust.
Inch
T
1
INCH COMPONENT
Catalog Number
Aerosol
Container Size
A 9L80-0316
16 oz.
2
3
CUTTING OIL
DESCRIPTION:
Cutting Oil is an all purpose lubricant and coolant. It gives

maximum lubricity for longer tool life and means less tool
sharpening, less down time. Cutting Oil is a specially
formulated compound that can be used for all ferrous and
nonferrous machining operations such as grinding and
cutting. Washes off easily with commercial type cleaners.
5
6
APPLICATION:
Turret lathes, broaches, automatic screw machines, all

machine tools where a quality cutting oil is needed.
INCH COMPONENT
Catalog Number
Aerosol
Container Size
A 9L80-1216
16 oz.
8
9
10
11
12
13
14
15
15-55
16
16 - FOOT MOUNTS LOCATOR CHART

R
T
1
FOOT
SCREW
Polyamide
30 Articulation, Stainless Steel

Fixed, Stainless Steel
30 Articulation, Galvanized Steel
Fixed, Galvanized Steel
2
Stainless Steel
11
12
13
16-3
16-4
16-5
3.15
16-12 16-13 16-14
FOOT
SCREW
Polyamide

Fixed, Stainless Steel
Fixed, Galvanized Steel
Steel, Galvanized
Steel, Painted Yellow
16-2
16-0
16-52
16-53
16-44
16-47
Base O.D. Inches

3.94
4.06
4.72
16-25
16-31
16-35
16-36
4.84
4.88
16-26
16-32
16-27
16-36
16-54
16-55
Stamped Base
16-50
16-46
16-42
16-41
5.51
16-8
16-11
16-17
16-20
16-7
16-10
16-16
16-19

16-45
10 Articulation, Galvanized Steel Mounting Tab 16-48
8 Articulation, Galvanized Steel Stamped Base
Hardware for Foot Mounts:

Hexagonal Nuts - pg. 16-56
Flat Washers - pg. 16-57
Split Lock Washers - pg. 16-58
15
Features

10 Articulation, Stainless Steel Mounting Tab
10 Articulation, Stainless Steel USDA Approved
8 Articulation, Stainless Steel Stamped Base
8 Articulation, Stainless Steel Stamped Base
Steel, Black Cataphoresis 8 Articulation, Galvanized Steel
3.35
Stamped Base
16-38 16-39 16-40
Stainless Steel
3.27
16-6
16-9
16-15
16-18
14
NEW
2.56
Steel, Painted Yellow
10
1.97
16-43
1.57

10 Articulation, Galvanized Steel Mounting Tab
Steel, Galvanized
Inch
Base O.D. Inches
16-21 16-22 16-23 16-24

16-29
16-28
16-33
10 Articulation, Stainless Steel Mounting Tab
16-36
10 Articulation, Stainless Steel USDA Approved
Stamped Base
Stamped Base
Steel, Black Cataphoresis 8 Articulation, Galvanized Steel
Features
16-49
16-51
16 - FOOT MOUNTS
R
Inch
T
1
2
3
Polyamide & 304 Stainless Steel

30 Articulation
pg. 16-3
Polyamide & 304 Stainless Steel

pg. 16-9
Polyamide & 1040 Steel, Galvanized

30 Articulation
pg. 16-12
4
5
6
7
8
Polyamide & 1040 Steel, Galvanized

Fixed Screw
pg. 16-18
304 Stainless Steel

30 Articulation pg. 16-21
304 Stainless Steel

9
10
11
12
13
304 Stainless Steel

304 Stainless Steel

USDA Approved pg. 16-36
304 Stainless Steel

USDA Approved pg. 16-37
14
15
16-1
NEW
16 - FOOT MOUNTS
R
Inch
1
2
3
4
1040 Steel, Painted Yellow &

1040 Steel, Galvanized pg. 16-38
1040 Steel, Galvanized



Stamped Base pg. 16-49
1040 Steel, Black Cataphoresis

Stamped Base
pg. 16-50
304 Stainless Steel

Stamped Base pg. 16-52
5
6
7
8
9
10
11
12
13
14
304 Stainless Steel &

Vulcanized Rubber pg. 16-53
15
NEW
16-2
FOOT MOUNTS POLYAMIDE

1.57" BASE
30 ARTICULATION
FOR LOADS UP TO 2248 lbf (10000 N)
CHEMICAL RESISTANT
R
Inch
MATERIAL:
Foot - Polyamide, Fiberglass Reinforced

Screw - 304 Stainless Steel
Base Pad - NBR Rubber
T
1
Standard: +23F to +248F (-5C to +120C)

Nonslip: +23F to +230F (-5C to +110C)
FEATURES:
70 Shore NBR Rubber Base.

30 of Angular Articulation.
Low Cost.
3
30
5
6
Lm
HEX FOR
WRENCH SIZE 1/2
1.063 (27)
.650 (16.5)
1.57 (40)
.118 (3) FOR NONSLIP ONLY
9
10
INCH COMPONENT
Catalog Number
Standard
Nonslip
A42Z01-157025X01
A42Z01-157025X02
A42Z01-157025X03
A42Z01-157025X04
A42Z01-157038X01
A42Z01-157038X02
A42Z01-157038X03
A42Z01-157038X04
A42Z01-157038X05
A42Z01-157050X01
A42Z01-157050X02
A42Z01-157050X03
A42Z01-157050X04
A42Z01-157050X05
A42Z02-157025X01
A42Z02-157025X02
A42Z02-157025X03
A42Z02-157025X04
A42Z02-157038X01
A42Z02-157038X02
A42Z02-157038X03
A42Z02-157038X04
A42Z02-157038X05
A42Z02-157050X01
A42Z02-157050X02
A42Z02-157050X03
A42Z02-157050X04
A42Z02-157050X05
Lm
Max. Static
Load
2.047 (52)
3.032 (77)
4.016 (102)
5.000 (127)
2.047 (52)
3.032 (77)
4.016 (102)
5.000 (127)
5.984 (152)
2.047 (52)
3.032 (77)
4.016 (102)
5.000 (127)
5.984 (152)
.984 (25)
1.969 (50)
2.953 (75)
3.937 (100)
.984 (25)
1.969 (50)
2.953 (75)
3.937 (100)
4.921 (125)
.984 (25)
1.969 (50)
2.953 (75)
3.937 (100)
4.921 (125)
1/4-20
1/4-20
1/4-20
1/4-20
3/8-16
3/8-16
3/8-16
3/8-16
3/8-16
1/2-13
1/2-13
1/2-13
1/2-13
1/2-13
2248 (10000)
2248 (10000)
2248 (10000)
2248 (10000)
2248 (10000)
2248 (10000)
2248 (10000)
2248 (10000)
2248 (10000)
2248 (10000)
2248 (10000)
2248 (10000)
2248 (10000)
2248 (10000)
lbf (N)
16-3
11
12
13
14
15
NEW
I
R
T
1

1.97" BASE
30 ARTICULATION
CHEMICAL RESISTANT
Inch
MATERIAL:


30
FEATURES:

Low Cost.
4
Lm
HEX FOR
WRENCH SIZE 5/8
6
1.181 (30)
.787 (20)
7
8
1.97 (50)
INCH COMPONENT
Catalog Number
9
10
11
12
13
Standard
Nonslip
A42Z01-197038X01
A42Z01-197038X02
A42Z01-197038X03
A42Z01-197038X04
A42Z01-197038X05
A42Z01-197050X01
A42Z01-197050X02
A42Z01-197050X03
A42Z01-197050X04
A42Z01-197050X05
A42Z01-197063X02
A42Z01-197063X03
A42Z01-197063X04
A42Z01-197063X05
A42Z02-197038X01
A42Z02-197038X02
A42Z02-197038X03
A42Z02-197038X04
A42Z02-197038X05
A42Z02-197050X01
A42Z02-197050X02
A42Z02-197050X03
A42Z02-197050X04
A42Z02-197050X05
A42Z02-197063X02
A42Z02-197063X03
A42Z02-197063X04
A42Z02-197063X05
14
15
NEW
16-4
Lm
Max. Static
Load
2.165 (55)
3.150 (80)
4.134 (105)
5.118 (130)
6.102 (155)
2.165 (55)
3.150 (80)
4.134 (105)
5.118 (130)
6.102 (155)
3.150 (80)
4.134 (105)
5.118 (130)
6.102 (155)
.984 (25)
1.969 (50)
2.953 (75)
3.937 (100)
4.921 (125)
.984 (25)
1.969 (50)
2.953 (75)
3.937 (100)
4.921 (125)
1.969 (50)
2.953 (75)
3.937 (100)
4.921 (125)
3/8-16
3/8-16
3/8-16
3/8-16
3/8-16
1/2-13
1/2-13
1/2-13
1/2-13
1/2-13
5/8-11
5/8-11
5/8-11
5/8-11
2473 (11000)
2473 (11000)
2473 (11000)
2473 (11000)
2473 (11000)
2473 (11000)
2473 (11000)
2473 (11000)
2473 (11000)
2473 (11000)
2473 (11000)
2473 (11000)
2473 (11000)
2473 (11000)
lbf (N)

2.56" BASE
30 ARTICULATION
CHEMICAL RESISTANT
R
Inch
MATERIAL:

T
1

30
FEATURES:

Low Cost.
WRENCHES:
4
Lm
HEX
FLATS OR HEX FOR

WRENCH SIZE 5/8
.906 (23)
A
FLAT
2.56 (65)
INCH COMPONENT
Catalog Number
Standard
Hex
A42Z01-256038X02
A42Z01-256038X03
A42Z01-256038X04
A42Z01-256038X05
A42Z01-256050X02
A42Z01-256050X03
A42Z01-256050X04
A42Z01-256050X05
A42Z01-256063X02
A42Z01-256063X03
A42Z01-256063X04
A42Z01-256063X05
A42Z01-256063X06
A42Z01-256063X07
Flat
A42Z01-256075X02
A42Z01-256075X03
A42Z01-256075X04
A42Z01-256075X05
A42Z01-256075X06
A42Z01-256075X07
A42Z01-256075X08
Lm
Max. Static
Load
A42Z02-256038X02
A42Z02-256038X03
A42Z02-256038X04
A42Z02-256038X05
A42Z02-256050X02
A42Z02-256050X03
A42Z02-256050X04
A42Z02-256050X05
A42Z02-256063X02
A42Z02-256063X03
A42Z02-256063X04
A42Z02-256063X05
A42Z02-256063X06
A42Z02-256063X07
3.268 (83)
4.252 (108)
5.236 (133)
6.220 (158)
3.268 (83)
4.252 (108)
5.236 (133)
6.220 (158)
3.268 (83)
4.252 (108)
5.236 (133)
6.220 (158)
7.205 (183)
8.189 (208)
1.299 (33)
1.299 (33)
1.299 (33)
1.299 (33)
1.299 (33)
1.299 (33)
1.299 (33)
1.299 (33)
1.299 (33)
1.299 (33)
1.299 (33)
1.299 (33)
1.299 (33)
1.299 (33)
1.969 (50)
2.953 (75)
3.937 (100)
4.921 (125)
1.969 (50)
2.953 (75)
3.937 (100)
4.921 (125)
1.969 (50)
2.953 (75)
3.937 (100)
4.921 (125)
5.906 (150)
6.890 (175)
3/8-16
3/8-16
3/8-16
3/8-16
1/2-13
1/2-13
1/2-13
1/2-13
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
2473 (11000)
2473 (11000)
2473 (11000)
2473 (11000)
2473 (11000)
2473 (11000)
2473 (11000)
2473 (11000)
3372 (15000)
3372 (15000)
3372 (15000)
3372 (15000)
3372 (15000)
3372 (15000)
A42Z02-256075X02
A42Z02-256075X03
A42Z02-256075X04
A42Z02-256075X05
A42Z02-256075X06
A42Z02-256075X07
A42Z02-256075X08
3.426 (87)
4.410 (112)
5.394 (137)
6.378 (162)
7.363 (187)
8.347 (212)
9.331 (237)
1.457 (37)
1.457 (37)
1.457 (37)
1.457 (37)
1.457 (37)
1.457 (37)
1.457 (37)
1.969 (50)
2.953 (75)
3.937 (100)
4.921 (125)
5.906 (150)
6.890 (175)
7.874 (200)
3/4-10
3/4-10
3/4-10
3/4-10
3/4-10
3/4-10
3/4-10
3372 (15000)
3372 (15000)
3372 (15000)
3372 (15000)
3372 (15000)
3372 (15000)
3372 (15000)
Nonslip
lbf (N)
9
10
11
12
13
14
15
16-5
NEW
I
R
T
1

3.27" BASE
30 ARTICULATION
CHEMICAL RESISTANT
Inch
MATERIAL:


30
FEATURES:
3
4
5

Low Cost.
WRENCHES:
Lm
L
FLATS OR HEX FOR
WRENCH SIZE 5/8
(2X) .33 (8.5)
DRILLING IS REQUIRED
FOR THROUGH HOLE
HEX
1.063 (27)
A
6
7
8
9
10
11
12
13
14
15
2.17 (55)
3.27 (83)
FLAT
INCH COMPONENT
Catalog Number
Standard
Hex
A42Z01-327038X02
A42Z01-327038X03
A42Z01-327038X04
A42Z01-327038X05
A42Z01-327050X02
A42Z01-327050X03
A42Z01-327050X04
A42Z01-327050X05
A42Z01-327063X02
A42Z01-327063X03
A42Z01-327063X04
A42Z01-327063X05
A42Z01-327063X06
A42Z01-327063X07
A42Z01-327063X08
Flat
A42Z01-327075X03
A42Z01-327075X04
A42Z01-327075X05
A42Z01-327075X06
A42Z01-327075X07
A42Z01-327075X08
A42Z01-327075X09
Lm
Max. Static
Load
A42Z02-327038X02
A42Z02-327038X03
A42Z02-327038X04
A42Z02-327038X05
A42Z02-327050X02
A42Z02-327050X03
A42Z02-327050X04
A42Z02-327050X05
A42Z02-327063X02
A42Z02-327063X03
A42Z02-327063X04
A42Z02-327063X05
A42Z02-327063X06
A42Z02-327063X07
A42Z02-327063X08
3.465 (88)
4.449 (113)
5.433 (138)
6.417 (163)
3.465 (88)
4.449 (113)
5.433 (138)
6.417 (163)
3.583 (91)
4.567 (116)
5.551 (141)
6.535 (166)
7.520 (191)
8.504 (216)
9.488 (241)
1.496 (38)
1.496 (38)
1.496 (38)
1.496 (38)
1.496 (38)
1.496 (38)
1.496 (38)
1.496 (38)
1.614 (41)
1.614 (41)
1.614 (41)
1.614 (41)
1.614 (41)
1.614 (41)
1.614 (41)
1.969 (50)
2.953 (75)
3.937 (100)
4.921 (125)
1.969 (50)
2.953 (75)
3.937 (100)
4.921 (125)
1.969 (50)
2.953 (75)
3.937 (100)
4.921 (125)
5.906 (150)
6.890 (175)
7.874 (200)
3/8-16
3/8-16
3/8-16
3/8-16
1/2-13
1/2-13
1/2-13
1/2-13
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
3372 (15000)
3372 (15000)
3372 (15000)
3372 (15000)
3372 (15000)
3372 (15000)
3372 (15000)
3372 (15000)
4496 (20000)
4496 (20000)
4496 (20000)
4496 (20000)
4496 (20000)
4496 (20000)
4496 (20000)
A42Z02-327075X03
A42Z02-327075X04
A42Z02-327075X05
A42Z02-327075X06
A42Z02-327075X07
A42Z02-327075X08
A42Z02-327075X09
4.567 (116)
5.551 (141)
6.535 (166)
7.520 (191)
8.504 (216)
9.488 (241)
10.472 (266)
1.614 (41)
1.614 (41)
1.614 (41)
1.614 (41)
1.614 (41)
1.614 (41)
1.614 (41)
2.953 (75)
3.937 (100)
4.921 (125)
5.906 (150)
6.890 (175)
7.874 (200)
8.858 (225)
3/4-10
3/4-10
3/4-10
3/4-10
3/4-10
3/4-10
3/4-10
4496 (20000)
4496 (20000)
4496 (20000)
4496 (20000)
4496 (20000)
4496 (20000)
4496 (20000)
Nonslip
NEW
16-6
lbf (N)

4.06" BASE
30 ARTICULATION
CHEMICAL RESISTANT
R
Inch
MATERIAL:

T
1
Standard:
+23F to +248F (-5C to +120C)
Nonslip:
+23F to +230F (-5C to +110C)
30
M
FEATURES:

Low Cost.
Lm
L
FLATS FOR WRENCH
1.260 (32)
(2X) .49 (12.5)

DRILLING IS
REQUIRED
FOR THROUGH
HOLE
2.008 (51)
INCH COMPONENT
Catalog Number
Standard
A42Z01-406063X02
A42Z01-406063X03
A42Z01-406063X04
A42Z01-406063X05
A42Z01-406063X06
A42Z01-406063X07
A42Z01-406063X08
A42Z01-406063X09
A42Z01-406075X03
A42Z01-406075X04
A42Z01-406075X05
A42Z01-406075X06
A42Z01-406075X07
A42Z01-406075X08
A42Z01-406075X09
A42Z01-406075X10
A42Z01-406100X03
A42Z01-406100X04
A42Z01-406100X05
A42Z01-406100X06
A42Z01-406100X07
A42Z01-406100X08
A42Z01-406100X09
A42Z01-406100X10
Nonslip
A42Z02-406063X02
A42Z02-406063X03
A42Z02-406063X04
A42Z02-406063X05
A42Z02-406063X06
A42Z02-406063X07
A42Z02-406063X08
A42Z02-406063X09
A42Z02-406075X03
A42Z02-406075X04
A42Z02-406075X05
A42Z02-406075X06
A42Z02-406075X07
A42Z02-406075X08
A42Z02-406075X09
A42Z02-406075X10
A42Z02-406100X03
A42Z02-406100X04
A42Z02-406100X05
A42Z02-406100X06
A42Z02-406100X07
A42Z02-406100X08
A42Z02-406100X09
A42Z02-406100X10
6
7
2.87 (73)
4.06 (103)
Lm
Wrench
Size
Max. Static
Load
3.977 (101)
4.961 (126)
5.945 (151)
6.929 (176)
7.914 (201)
8.898 (226)
9.882 (251)
10.866 (276)
4.961 (126)
5.945 (151)
6.929 (176)
7.914 (201)
8.898 (226)
9.882 (251)
10.866 (276)
11.851 (301)
4.961 (126)
5.945 (151)
6.929 (176)
7.914 (201)
8.898 (226)
9.882 (251)
10.866 (276)
11.851 (301)
1.969 (50)
2.953 (75)
3.937 (100)
4.921 (125)
5.906 (150)
6.890 (175)
7.874 (200)
8.858 (225)
2.953 (75)
3.937 (100)
4.921 (125)
5.906 (150)
6.890 (175)
7.874 (200)
8.858 (225)
9.843 (250)
2.953 (75)
3.937 (100)
4.921 (125)
5.906 (150)
6.890 (175)
7.874 (200)
8.858 (225)
9.843 (250)
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
3/4-10
3/4-10
3/4-10
3/4-10
3/4-10
3/4-10
3/4-10
3/4-10
1-8
1-8
1-8
1-8
1-8
1-8
1-8
1-8
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
5620 (25000)
5620 (25000)
5620 (25000)
5620 (25000)
5620 (25000)
5620 (25000)
5620 (25000)
5620 (25000)
5620 (25000)
5620 (25000)
5620 (25000)
5620 (25000)
5620 (25000)
5620 (25000)
5620 (25000)
5620 (25000)
5620 (25000)
5620 (25000)
5620 (25000)
5620 (25000)
5620 (25000)
5620 (25000)
5620 (25000)
5620 (25000)
lbf (N)
8
9
10
11
12
13
14
15
16-7
NEW
I
R
T
1

4.84" BASE
30 ARTICULATION
CHEMICAL RESISTANT
Inch
MATERIAL:

30
M
Standard:
+23F to +248F (-5C to +120C)
Nonslip:
+23F to +230F (-5C to +110C)
FEATURES:
Lm
L

Low Cost.
3.42 (87)
4.84 (123)
5
6
INCH COMPONENT
Catalog Number
7
8
9
10
11
12
13
14
15
Standard
Nonslip
A42Z01-484063X02
A42Z01-484063X03
A42Z01-484063X04
A42Z01-484063X05
A42Z01-484063X06
A42Z01-484063X07
A42Z01-484063X08
A42Z01-484063X09
A42Z01-484075X03
A42Z01-484075X04
A42Z01-484075X05
A42Z01-484075X06
A42Z01-484075X07
A42Z01-484075X08
A42Z01-484075X09
A42Z01-484075X10
A42Z01-484100X03
A42Z01-484100X04
A42Z01-484100X05
A42Z01-484100X06
A42Z01-484100X07
A42Z01-484100X08
A42Z01-484100X09
A42Z01-484100X10
A42Z01-484113X04
A42Z01-484113X05
A42Z01-484113X06
A42Z01-484113X07
A42Z01-484113X08
A42Z01-484113X09
A42Z01-484113X10
A42Z02-484063X02
A42Z02-484063X03
A42Z02-484063X04
A42Z02-484063X05
A42Z02-484063X06
A42Z02-484063X07
A42Z02-484063X08
A42Z02-484063X09
A42Z02-484075X03
A42Z02-484075X04
A42Z02-484075X05
A42Z02-484075X06
A42Z02-484075X07
A42Z02-484075X08
A42Z02-484075X09
A42Z02-484075X10
A42Z02-484100X03
A42Z02-484100X04
A42Z02-484100X05
A42Z02-484100X06
A42Z02-484100X07
A42Z02-484100X08
A42Z02-484100X09
A42Z02-484100X10
A42Z02-484113X04
A42Z02-484113X05
A42Z02-484113X06
A42Z02-484113X07
A42Z02-484113X08
A42Z02-484113X09
A42Z02-484113X10
NEW
FLATS FOR WRENCH

(2X) .49 (12.5)
DRILLING IS
REQUIRED
FOR THROUGH
HOLE
1.457 (37)
16-8
Lm
4.213 (107)
5.197 (132)
6.181 (157)
7.165 (182)
8.150 (207)
9.134 (232)
10.118 (257)
11.102 (282)
5.197 (132)
6.181 (157)
7.165 (182)
8.150 (207)
9.134 (232)
10.118 (257)
11.102 (282)
12.087 (307)
5.197 (132)
6.181 (157)
7.165 (182)
8.150 (207)
9.134 (232)
10.118 (257)
11.102 (282)
12.087 (307)
6.220 (158)
7.204 (183)
8.189 (208)
9.173 (233)
10.157 (258)
11.141 (283)
12.126 (308)
2.244 (57)
2.244 (57)
2.244 (57)
2.244 (57)
2.244 (57)
2.244 (57)
2.244 (57)
2.244 (57)
2.244 (57)
2.244 (57)
2.244 (57)
2.244 (57)
2.244 (57)
2.244 (57)
2.244 (57)
2.244 (57)
2.244 (57)
2.244 (57)
2.244 (57)
2.244 (57)
2.244 (57)
2.244 (57)
2.244 (57)
2.244 (57)
2.283 (58)
2.283 (58)
2.283 (58)
2.283 (58)
2.283 (58)
2.283 (58)
2.283 (58)
1.969 (50)
2.953 (75)
3.937 (100)
4.921 (125)
5.906 (150)
6.890 (175)
7.874 (200)
8.858 (225)
2.953 (75)
3.937 (100)
4.921 (125)
5.906 (150)
6.890 (175)
7.874 (200)
8.858 (225)
9.843 (250)
2.953 (75)
3.937 (100)
4.921 (125)
5.906 (150)
6.890 (175)
7.874 (200)
8.858 (225)
9.843 (250)
3.937 (100)
4.921 (125)
5.906 (150)
6.890 (175)
7.874 (200)
8.858 (225)
9.843 (250)
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
3/4-10
3/4-10
3/4-10
3/4-10
3/4-10
3/4-10
3/4-10
3/4-10
1-8
1-8
1-8
1-8
1-8
1-8
1-8
1-8
1 1/8-7
1 1/8-7
1 1/8-7
1 1/8-7
1 1/8-7
1 1/8-7
1 1/8-7
Wrench Max. Static

Load
Size
lbf (N)
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
1
1
1
1
1
1
1
7868 (35000)
7868 (35000)
7868 (35000)
7868 (35000)
7868 (35000)
7868 (35000)
7868 (35000)
7868 (35000)
7868 (35000)
7868 (35000)
7868 (35000)
7868 (35000)
7868 (35000)
7868 (35000)
7868 (35000)
7868 (35000)
7868 (35000)
7868 (35000)
7868 (35000)
7868 (35000)
7868 (35000)
7868 (35000)
7868 (35000)
7868 (35000)
7868 (35000)
7868 (35000)
7868 (35000)
7868 (35000)
7868 (35000)
7868 (35000)
7868 (35000)

3.27" BASE
FIXED SCREW
CHEMICAL RESISTANT
R
Inch
MATERIAL:

T
1

FEATURES:

4 Angular Articulation.
Low Cost.
WRENCHES:
Lm
L
HEX
A
1.102 (28)
2.20 (56)
3.27 (83)
FLAT
FLATS OR HEX FOR

WRENCH SIZE 5/8
(2X) .33 (8.5)
DRILLING IS
REQUIRED
FOR THROUGH
HOLE
6
7
INCH COMPONENT
Catalog Number
Standard
Hex
A42Z05-327038X02
A42Z05-327038X03
A42Z05-327038X04
A42Z05-327038X05
A42Z05-327050X02
A42Z05-327050X03
A42Z05-327050X04
A42Z05-327050X05
A42Z05-327063X02
A42Z05-327063X03
A42Z05-327063X04
A42Z05-327063X05
A42Z05-327063X06
A42Z05-327063X07
A42Z05-327063X08
Flat
A42Z05-327075X03
A42Z05-327075X04
A42Z05-327075X05
A42Z05-327075X06
A42Z05-327075X07
A42Z05-327075X08
A42Z05-327075X09
Lm
Max. Static
Load
A42Z06-327038X02
A42Z06-327038X03
A42Z06-327038X04
A42Z06-327038X05
A42Z06-327050X02
A42Z06-327050X03
A42Z06-327050X04
A42Z06-327050X05
A42Z06-327063X02
A42Z06-327063X03
A42Z06-327063X04
A42Z06-327063X05
A42Z06-327063X06
A42Z06-327063X07
A42Z06-327063X08
3.386 (86)
4.370 (111)
5.354 (136)
6.338 (161)
3.386 (86)
4.370 (111)
5.354 (136)
6.338 (161)
3.544 (90)
4.528 (115)
5.512 (140)
6.496 (165)
7.481 (190)
8.465 (215)
9.449 (240)
1.417 (36)
1.417 (36)
1.417 (36)
1.417 (36)
1.417 (36)
1.417 (36)
1.417 (36)
1.417 (36)
1.575 (40)
1.575 (40)
1.575 (40)
1.575 (40)
1.575 (40)
1.575 (40)
1.575 (40)
1.969 (50)
2.953 (75)
3.937 (100)
4.921 (125)
1.969 (50)
2.953 (75)
3.937 (100)
4.921 (125)
1.969 (50)
2.953 (75)
3.953 (100)
4.921 (125)
5.906 (150)
6.890 (175)
7.874 (200)
3/8-16
3/8-16
3/8-16
3/8-16
1/2-13
1/2-13
1/2-13
1/2-13
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
3372 (15000)
3372 (15000)
3372 (15000)
3372 (15000)
3372 (15000)
3372 (15000)
3372 (15000)
3372 (15000)
4496 (20000)
4496 (20000)
4496 (20000)
4496 (20000)
4496 (20000)
4496 (20000)
4496 (20000)
A42Z06-327075X03
A42Z06-327075X04
A42Z06-327075X05
A42Z06-327075X06
A42Z06-327075X07
A42Z06-327075X08
A42Z06-327075X09
4.528 (115)
5.512 (140)
6.496 (165)
7.481 (190)
8.465 (215)
9.449 (240)
10.433 (265)
1.575 (40)
1.575 (40)
1.575 (40)
1.575 (40)
1.575 (40)
1.575 (40)
1.575 (40)
2.953 (75)
3.937 (100)
4.921 (125)
5.906 (150)
6.890 (175)
7.874 (200)
8.858 (225)
3/4-10
3/4-10
3/4-10
3/4-10
3/4-10
3/4-10
3/4-10
4496 (20000)
4496 (20000)
4496 (20000)
4496 (20000)
4496 (20000)
4496 (20000)
4496 (20000)
Nonslip
lbf (N)
8
9
10
11
12
13
14
15
16-9
NEW
I
R
T
1

4.06" BASE
FIXED SCREW
CHEMICAL RESISTANT
Inch
MATERIAL:

2
3
4
Standard:
+23F to +248F (-5C to +120C)
Nonslip:
+23F to +230F (-5C to +110C)
Lm
FEATURES:

Low Cost.
FLATS FOR
WRENCH
(2X) .49 (12.5)
FOR THROUGH HOLE
1.299 (33)
2.87 (73)
4.06 (103)
6
INCH COMPONENT
7
8
9
10
11
12
13
Catalog Number
Standard
Nonslip
A42Z05-406063X02
A42Z05-406063X03
A42Z05-406063X04
A42Z05-406063X05
A42Z05-406063X06
A42Z05-406063X07
A42Z05-406063X08
A42Z05-406063X09
A42Z05-406075X03
A42Z05-406075X04
A42Z05-406075X05
A42Z05-406075X06
A42Z05-406075X07
A42Z05-406075X08
A42Z05-406075X09
A42Z05-406100X03
A42Z05-406100X04
A42Z05-406100X05
A42Z05-406100X06
A42Z05-406100X07
A42Z05-406100X08
A42Z05-406100X09
A42Z06-406063X02
A42Z06-406063X03
A42Z06-406063X04
A42Z06-406063X05
A42Z06-406063X06
A42Z06-406063X07
A42Z06-406063X08
A42Z06-406063X09
A42Z06-406075X03
A42Z06-406075X04
A42Z06-406075X05
A42Z06-406075X06
A42Z06-406075X07
A42Z06-406075X08
A42Z06-406075X09
A42Z06-406100X03
A42Z06-406100X04
A42Z06-406100X05
A42Z06-406100X06
A42Z06-406100X07
A42Z06-406100X08
A42Z06-406100X09
14
15
NEW
16-10
Lm
3.741 (95)
4.725 (120)
5.709 (145)
6.693 (170)
7.678 (195)
8.662 (220)
9.646 (245)
10.630 (270)
4.725 (120)
5.709 (145)
6.693 (170)
7.678 (195)
8.662 (220)
9.646 (245)
10.630 (270)
4.803 (122)
5.787 (147)
6.771 (172)
7.756 (197)
8.740 (222)
9.724 (247)
10.708 (272)
1.772 (45)
1.772 (45)
1.772 (45)
1.772 (45)
1.772 (45)
1.772 (45)
1.772 (45)
1.772 (45)
1.772 (45)
1.772 (45)
1.772 (45)
1.772 (45)
1.772 (45)
1.772 (45)
1.772 (45)
1.850 (47)
1.850 (47)
1.850 (47)
1.850 (47)
1.850 (47)
1.850 (47)
1.850 (47)
1.969 (50)
2.953 (75)
3.937 (100)
4.921 (125)
5.906 (150)
6.890 (175)
7.874 (200)
8.858 (225)
2.953 (75)
3.937 (100)
4.921 (125)
5.906 (150)
6.890 (175)
7.874 (200)
8.858 (225)
2.953 (75)
3.937 (100)
4.921 (125)
5.906 (150)
6.890 (175)
7.874 (200)
8.858 (225)
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
3/4-10
3/4-10
3/4-10
3/4-10
3/4-10
3/4-10
3/4-10
1-8
1-8
1-8
1-8
1-8
1-8
1-8
Static
Wrench Max.
Load
Size
lbf (N)
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7868 (35000)
7868 (35000)
7868 (35000)
7868 (35000)
7868 (35000)
7868 (35000)
7868 (35000)
7868 (35000)
7868 (35000)
7868 (35000)
7868 (35000)
7868 (35000)
7868 (35000)
7868 (35000)
7868 (35000)
7868 (35000)
7868 (35000)
7868 (35000)
7868 (35000)
7868 (35000)
7868 (35000)
7868 (35000)

4.84" BASE
FIXED SCREW
CHEMICAL RESISTANT
R
Inch
MATERIAL:

Standard:
+23F to +248F (-5C to +120C)
Nonslip:
+23F to +230F (-5C to +110C)
2
Lm
FEATURES:

Low Cost.
L
FLATS FOR WRENCH
(2X) .49 (12.5)
FOR THROUGH HOLE
1.457 (37)
1.969 (50)
4
5
3.42 (87)
4.84 (123)
INCH COMPONENT
Catalog Number
Standard
Nonslip
A42Z05-484063X02
A42Z05-484063X03
A42Z05-484063X04
A42Z05-484063X05
A42Z05-484063X06
A42Z05-484063X07
A42Z05-484063X08
A42Z05-484063X09
A42Z05-484075X03
A42Z05-484075X04
A42Z05-484075X05
A42Z05-484075X06
A42Z05-484075X07
A42Z05-484075X08
A42Z05-484075X09
A42Z05-484100X03
A42Z05-484100X04
A42Z05-484100X05
A42Z05-484100X06
A42Z05-484100X07
A42Z05-484100X08
A42Z05-484100X09
A42Z05-484100X10
A42Z05-484113X04
A42Z05-484113X05
A42Z05-484113X06
A42Z05-484113X07
A42Z05-484113X08
A42Z05-484113X09
A42Z05-484113X10
A42Z06-484063X02
A42Z06-484063X03
A42Z06-484063X04
A42Z06-484063X05
A42Z06-484063X06
A42Z06-484063X07
A42Z06-484063X08
A42Z06-484063X09
A42Z06-484075X03
A42Z06-484075X04
A42Z06-484075X05
A42Z06-484075X06
A42Z06-484075X07
A42Z06-484075X08
A42Z06-484075X09
A42Z06-484100X03
A42Z06-484100X04
A42Z06-484100X05
A42Z06-484100X06
A42Z06-484100X07
A42Z06-484100X08
A42Z06-484100X09
A42Z06-484100X10
A42Z06-484113X04
A42Z06-484113X05
A42Z06-484113X06
A42Z06-484113X07
A42Z06-484113X08
A42Z06-484113X09
A42Z06-484113X10
Lm
Wrench
Size
Max. Static
Load
3.937 (100)
4.921 (125)
5.906 (150)
6.890 (175)
7.874 (200)
8.858 (225)
9.843 (250)
10.827 (275)
4.921 (125)
5.906 (150)
6.890 (175)
7.874 (200)
8.858 (225)
9.843 (250)
10.827 (275)
4.921 (125)
5.906 (150)
6.890 (175)
7.874 (200)
8.858 (225)
9.843 (250)
10.827 (275)
11.812 (300)
5.906 (150)
6.890 (175)
7.874 (200)
8.858 (225)
9.843 (250)
10.827 (275)
11.812 (300)
1.969 (50)
2.953 (75)
3.937 (100)
4.921 (125)
5.906 (150)
6.890 (175)
7.874 (200)
8.858 (225)
2.953 (75)
3.937 (100)
4.921 (125)
5.906 (150)
6.890 (175)
7.874 (200)
8.858 (225)
2.953 (75)
3.937 (100)
4.921 (125)
5.906 (150)
6.890 (175)
7.874 (200)
8.858 (225)
9.843 (250)
3.937 (100)
4.921 (125)
5.906 (150)
6.890 (175)
7.874 (200)
8.858 (225)
9.843 (250)
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
3/4-10
3/4-10
3/4-10
3/4-10
3/4-10
3/4-10
3/4-10
1-8
1-8
1-8
1-8
1-8
1-8
1-8
1-8
1 1/8-7
1 1/8-7
1 1/8-7
1 1/8-7
1 1/8-7
1 1/8-7
1 1/8-7
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
1
1
1
1
1
1
1
10116 (45000)
10116 (45000)
10116 (45000)
10116 (45000)
10116 (45000)
10116 (45000)
10116 (45000)
10116 (45000)
10116 (45000)
10116 (45000)
10116 (45000)
10116 (45000)
10116 (45000)
10116 (45000)
10116 (45000)
10116 (45000)
10116 (45000)
10116 (45000)
10116 (45000)
10116 (45000)
10116 (45000)
10116 (45000)
10116 (45000)
10116 (45000)
10116 (45000)
10116 (45000)
10116 (45000)
10116 (45000)
10116 (45000)
10116 (45000)
lbf (N)
16-11
8
9
10
11
12
13
14
15
NEW
I
R
T
1

1.57" BASE
30 ARTICULATION
MILDLY CHEMICAL RESISTANT
Inch
MATERIAL:

Screw - 1040 Steel, Galvanized

FEATURES:

Low Cost.
30
5
6
7
8
9
10
Lm
L
WRENCH SIZE 1/2
1.063 (27)
.650 (16.5)
1.57 (40)
INCH COMPONENT
Catalog Number
11
12
13
14
15
NEW
Standard
Nonslip
A42Z03-157025X01
A42Z03-157025X02
A42Z03-157025X03
A42Z03-157025X04
A42Z03-157038X01
A42Z03-157038X02
A42Z03-157038X03
A42Z03-157038X04
A42Z03-157038X05
A42Z03-157050X01
A42Z03-157050X02
A42Z03-157050X03
A42Z03-157050X04
A42Z03-157050X05
A42Z04-157025X01
A42Z04-157025X02
A42Z04-157025X03
A42Z04-157025X04
A42Z04-157038X01
A42Z04-157038X02
A42Z04-157038X03
A42Z04-157038X04
A42Z04-157038X05
A42Z04-157050X01
A42Z04-157050X02
A42Z04-157050X03
A42Z04-157050X04
A42Z04-157050X05
16-12
Lm
Max. Static
Load
2.047 (52)
3.032 (77)
4.016 (102)
5.000 (127)
2.047 (52)
3.032 (77)
4.016 (102)
5.000 (127)
5.984 (152)
2.047 (52)
3.032 (77)
4.016 (102)
5.000 (127)
5.984 (152)
.984 (25)
1.969 (50)
2.953 (75)
3.937 (100)
.984 (25)
1.969 (50)
2.953 (75)
3.937 (100)
4.921 (125)
.984 (25)
1.969 (50)
2.953 (75)
3.937 (100)
4.921 (125)
1/4-20
1/4-20
1/4-20
1/4-20
3/8-16
3/8-16
3/8-16
3/8-16
3/8-16
1/2-13
1/2-13
1/2-13
1/2-13
1/2-13
2248 (10000)
2248 (10000)
2248 (10000)
2248 (10000)
2248 (10000)
2248 (10000)
2248 (10000)
2248 (10000)
2248 (10000)
2248 (10000)
2248 (10000)
2248 (10000)
2248 (10000)
2248 (10000)
lbf (N)

1.97" BASE
30 ARTICULATION
R
Inch
MATERIAL:

T
1

FEATURES:

Low Cost.
3
30
5
6
Lm
HEX FOR
WRENCH SIZE 5/8
7
8
1.181 (30)
.787 (20)
1.97 (50)
10
INCH COMPONENT
Catalog Number
Standard
Nonslip
A42Z03-197038X01
A42Z03-197038X02
A42Z03-197038X03
A42Z03-197038X04
A42Z03-197038X05
A42Z03-197050X01
A42Z03-197050X02
A42Z03-197050X03
A42Z03-197050X04
A42Z03-197050X05
A42Z03-197063X02
A42Z03-197063X03
A42Z03-197063X04
A42Z03-197063X05
A42Z04-197038X01
A42Z04-197038X02
A42Z04-197038X03
A42Z04-197038X04
A42Z04-197038X05
A42Z04-197050X01
A42Z04-197050X02
A42Z04-197050X03
A42Z04-197050X04
A42Z04-197050X05
A42Z04-197063X02
A42Z04-197063X03
A42Z04-197063X04
A42Z04-197063X05
Lm
Max. Static
Load
2.165 (55)
3.150 (80)
4.134 (105)
5.118 (130)
6.102 (155)
2.165 (55)
3.150 (80)
4.134 (105)
5.118 (130)
6.102 (155)
3.150 (80)
4.134 (105)
5.118 (130)
6.102 (155)
.984 (25)
1.969 (50)
2.953 (75)
3.937 (100)
4.921 (125)
.984 (25)
1.969 (50)
2.953 (75)
3.937 (100)
4.921 (125)
1.969 (50)
2.953 (75)
3.937 (100)
4.921 (125)
3/8-16
3/8-16
3/8-16
3/8-16
3/8-16
1/2-13
1/2-13
1/2-13
1/2-13
1/2-13
5/8-11
5/8-11
5/8-11
5/8-11
2473 (11000)
2473 (11000)
2473 (11000)
2473 (11000)
2473 (11000)
2473 (11000)
2473 (11000)
2473 (11000)
2473 (11000)
2473 (11000)
2473 (11000)
2473 (11000)
2473 (11000)
2473 (11000)
lbf (N)
16-13
11
12
13
14
15
NEW
I
R
T
1
2
3
4

2.56" BASE
30 ARTICULATION
THERMAL RESISTANT
Inch
MATERIAL:


30
FEATURES:

Low Cost.
WRENCHES:
Lm
L
HEX
FLATS OR HEX FOR

WRENCH SIZE 5/8
6
7
8
9
10
11
12
13
14
15
.906 (23)
A
FLAT
2.56 (65)
INCH COMPONENT
Catalog Number
Standard
Hex
A42Z03-256038X02
A42Z03-256038X03
A42Z03-256038X04
A42Z03-256038X05
A42Z03-256050X02
A42Z03-256050X03
A42Z03-256050X04
A42Z03-256050X05
A42Z03-256063X02
A42Z03-256063X03
A42Z03-256063X04
A42Z03-256063X05
A42Z03-256063X06
A42Z03-256063X07
Flat
A42Z03-256075X03
A42Z03-256075X04
A42Z03-256075X05
A42Z03-256075X06
A42Z03-256075X07
A42Z03-256075X08
Lm
Max. Static
Load
A42Z04-256038X02
A42Z04-256038X03
A42Z04-256038X04
A42Z04-256038X05
A42Z04-256050X02
A42Z04-256050X03
A42Z04-256050X04
A42Z04-256050X05
A42Z04-256063X02
A42Z04-256063X03
A42Z04-256063X04
A42Z04-256063X05
A42Z04-256063X06
A42Z04-256063X07
3.268 (83)
4.252 (108)
5.236 (133)
6.220 (158)
3.268 (83)
4.252 (108)
5.236 (133)
6.220 (158)
3.268 (83)
4.252 (108)
5.236 (133)
6.220 (158)
7.205 (183)
8.189 (208)
1.299 (33)
1.299 (33)
1.299 (33)
1.299 (33)
1.299 (33)
1.299 (33)
1.299 (33)
1.299 (33)
1.299 (33)
1.299 (33)
1.299 (33)
1.299 (33)
1.299 (33)
1.299 (33)
1.969 (50)
2.953 (75)
3.937 (100)
4.921 (125)
1.969 (50)
2.953 (75)
3.937 (100)
4.921 (125)
1.969 (50)
2.953 (75)
3.937 (100)
4.921 (125)
5.906 (150)
6.890 (175)
3/8-16
3/8-16
3/8-16
3/8-16
1/2-13
1/2-13
1/2-13
1/2-13
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
2473 (11000)
2473 (11000)
2473 (11000)
2473 (11000)
2473 (11000)
2473 (11000)
2473 (11000)
2473 (11000)
3372 (15000)
3372 (15000)
3372 (15000)
3372 (15000)
3372 (15000)
3372 (15000)
A42Z04-256075X03
A42Z04-256075X04
A42Z04-256075X05
A42Z04-256075X06
A42Z04-256075X07
A42Z04-256075X08
4.410 (112)
5.394 (137)
6.378 (162)
7.363 (187)
8.347 (212)
9.331 (237)
1.457 (37)
1.457 (37)
1.457 (37)
1.457 (37)
1.457 (37)
1.457 (37)
2.953 (75)
3.937 (100)
4.921 (125)
5.906 (150)
6.890 (175)
7.874 (200)
3/4-10
3/4-10
3/4-10
3/4-10
3/4-10
3/4-10
3372 (15000)
3372 (15000)
3372 (15000)
3372 (15000)
3372 (15000)
3372 (15000)
Nonslip
NEW
16-14
lbf (N)

3.27" BASE
30 ARTICULATION
THERMAL RESISTANT
R
Inch
MATERIAL:


30
M
FEATURES:

Low Cost.
Lm
WRENCHES:
L
1.063 (27)
HEX
FLATS OR HEX FOR

WRENCH SIZE 5/8
(2X) .33 (8.5)
FOR THROUGH HOLE
2.17 (55)
3.27 (83)
FLAT
INCH COMPONENT
Catalog Number
Standard
Hex
A42Z03-327038X02
A42Z03-327038X03
A42Z03-327038X04
A42Z03-327038X05
A42Z03-327050X02
A42Z03-327050X03
A42Z03-327050X04
A42Z03-327050X05
A42Z03-327063X02
A42Z03-327063X03
A42Z03-327063X04
A42Z03-327063X05
A42Z03-327063X06
A42Z03-327063X07
A42Z03-327063X08
Flat
A42Z03-327075X03
A42Z03-327075X04
A42Z03-327075X05
A42Z03-327075X06
A42Z03-327075X07
A42Z03-327075X08
A42Z03-327075X09
Lm
Max. Static
Load
A42Z04-327038X02
A42Z04-327038X03
A42Z04-327038X04
A42Z04-327038X05
A42Z04-327050X02
A42Z04-327050X03
A42Z04-327050X04
A42Z04-327050X05
A42Z04-327063X02
A42Z04-327063X03
A42Z04-327063X04
A42Z04-327063X05
A42Z04-327063X06
A42Z04-327063X07
A42Z04-327063X08
3.465 (88)
4.449 (113)
5.433 (138)
6.417 (163)
3.465 (88)
4.449 (113)
5.433 (138)
6.417 (163)
3.465 (88)
4.449 (113)
5.433 (138)
6.417 (163)
7.402 (188)
8.386 (213)
9.370 (238)
1.496 (38)
1.496 (38)
1.496 (38)
1.496 (38)
1.496 (38)
1.496 (38)
1.496 (38)
1.496 (38)
1.496 (38)
1.496 (38)
1.496 (38)
1.496 (38)
1.496 (38)
1.496 (38)
1.496 (38)
1.969 (50)
2.953 (75)
3.937 (100)
4.921 (125)
1.969 (50)
2.953 (75)
3.937 (100)
4.921 (125)
1.969 (50)
2.953 (75)
3.937 (100)
4.921 (125)
5.906 (150)
6.890 (175)
7.874 (200)
3/8-16
3/8-16
3/8-16
3/8-16
1/2-13
1/2-13
1/2-13
1/2-13
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
3372 (15000)
3372 (15000)
3372 (15000)
3372 (15000)
3372 (15000)
3372 (15000)
3372 (15000)
3372 (15000)
4496 (20000)
4496 (20000)
4496 (20000)
4496 (20000)
4496 (20000)
4496 (20000)
4496 (20000)
A42Z04-327075X03
A42Z04-327075X04
A42Z04-327075X05
A42Z04-327075X06
A42Z04-327075X07
A42Z04-327075X08
A42Z04-327075X09
4.567 (116)
5.551 (141)
6.535 (166)
7.520 (191)
8.504 (216)
9.488 (241)
10.472 (266)
1.614 (41)
1.614 (41)
1.614 (41)
1.614 (41)
1.614 (41)
1.614 (41)
1.614 (41)
2.953 (75)
3.937 (100)
4.921 (125)
5.906 (150)
6.890 (175)
7.874 (200)
8.858 (225)
3/4-10
3/4-10
3/4-10
3/4-10
3/4-10
3/4-10
3/4-10
4496 (20000)
4496 (20000)
4496 (20000)
4496 (20000)
4496 (20000)
4496 (20000)
4496 (20000)
Nonslip
lbf (N)
8
9
10
11
12
13
14
15
16-15
NEW
I
R
T

4.06" BASE
30 ARTICULATION
THERMAL RESISTANT
Inch
MATERIAL:
1
2
3

30

FEATURES:

Low Cost.
Lm
L
FLATS FOR WRENCH

1.260 (32)
2.87 (73)
4.06 (103)
7
8
9
10
11
12
13
14
15
INCH COMPONENT
Catalog Number
Standard
Nonslip
A42Z03-406063X02
A42Z03-406063X03
A42Z03-406063X04
A42Z03-406063X05
A42Z03-406063X06
A42Z03-406063X07
A42Z03-406063X08
A42Z03-406063X09
A42Z03-406075X03
A42Z03-406075X04
A42Z03-406075X05
A42Z03-406075X06
A42Z03-406075X07
A42Z03-406075X08
A42Z03-406075X09
A42Z03-406075X10
A42Z03-406100X03
A42Z03-406100X04
A42Z03-406100X05
A42Z03-406100X06
A42Z03-406100X07
A42Z03-406100X08
A42Z03-406100X09
A42Z03-406100X10
A42Z04-406063X02
A42Z04-406063X03
A42Z04-406063X04
A42Z04-406063X05
A42Z04-406063X06
A42Z04-406063X07
A42Z04-406063X08
A42Z04-406063X09
A42Z04-406075X03
A42Z04-406075X04
A42Z04-406075X05
A42Z04-406075X06
A42Z04-406075X07
A42Z04-406075X08
A42Z04-406075X09
A42Z04-406075X10
A42Z04-406100X03
A42Z04-406100X04
A42Z04-406100X05
A42Z04-406100X06
A42Z04-406100X07
A42Z04-406100X08
A42Z04-406100X09
A42Z04-406100X10
NEW
(2X) .49 (12.5)

DRILLING IS
REQUIRED
FOR THROUGH
HOLE
2.008 (51)
16-16
Lm
Wrench
Size
Max. Static
Load
3.977 (101)
4.961 (126)
5.945 (151)
6.929 (176)
7.914 (201)
8.898 (226)
9.882 (251)
10.866 (276)
4.961 (126)
5.945 (151)
6.929 (176)
7.914 (201)
8.898 (226)
9.882 (251)
10.866 (276)
11.851 (301)
4.961 (126)
5.945 (151)
6.929 (176)
7.914 (201)
8.898 (226)
9.882 (251)
10.866 (276)
11.851 (301)
1.969 (50)
2.953 (75)
3.937 (100)
4.921 (125)
5.906 (150)
6.890 (175)
7.874 (200)
8.858 (225)
2.953 (75)
3.937 (100)
4.921 (125)
5.906 (150)
6.890 (175)
7.874 (200)
8.858 (225)
9.843 (250)
2.953 (75)
3.937 (100)
4.921 (125)
5.906 (150)
6.890 (175)
7.874 (200)
8.858 (225)
9.843 (250)
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
3/4-10
3/4-10
3/4-10
3/4-10
3/4-10
3/4-10
3/4-10
3/4-10
1-8
1-8
1-8
1-8
1-8
1-8
1-8
1-8
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
5620 (25000)
5620 (25000)
5620 (25000)
5620 (25000)
5620 (25000)
5620 (25000)
5620 (25000)
5620 (25000)
5620 (25000)
5620 (25000)
5620 (25000)
5620 (25000)
5620 (25000)
5620 (25000)
5620 (25000)
5620 (25000)
5620 (25000)
5620 (25000)
5620 (25000)
5620 (25000)
5620 (25000)
5620 (25000)
5620 (25000)
5620 (25000)
lbf (N)

4.84" BASE
THERMAL RESISTANT
R
Inch
MATERIAL:

30
M
Standard:
+23F to +248F (-5C to +120C)
Nonslip:
+23F to +230F (-5C to +110C)
Lm
FEATURES:

Low Cost.
FLATS FOR WRENCH

(2X) .49 (12.5)
DRILLING IS
REQUIRED
FOR THROUGH
HOLE
1.457 (37)
A
3.42 (87)
4.84 (123)
5
6
INCH COMPONENT
Catalog Number
Standard
Nonslip
A42Z03-484063X02
A42Z03-484063X03
A42Z03-484063X04
A42Z03-484063X05
A42Z03-484063X06
A42Z03-484063X07
A42Z03-484063X08
A42Z03-484063X09
A42Z03-484075X03
A42Z03-484075X04
A42Z03-484075X05
A42Z03-484075X06
A42Z03-484075X07
A42Z03-484075X08
A42Z03-484075X09
A42Z03-484075X10
A42Z03-484100X03
A42Z03-484100X04
A42Z03-484100X05
A42Z03-484100X06
A42Z03-484100X07
A42Z03-484100X08
A42Z03-484100X09
A42Z03-484100X10
A42Z03-484113X04
A42Z03-484113X05
A42Z03-484113X06
A42Z03-484113X07
A42Z03-484113X08
A42Z03-484113X09
A42Z03-484113X10
A42Z04-484063X02
A42Z04-484063X03
A42Z04-484063X04
A42Z04-484063X05
A42Z04-484063X06
A42Z04-484063X07
A42Z04-484063X08
A42Z04-484063X09
A42Z04-484075X03
A42Z04-484075X04
A42Z04-484075X05
A42Z04-484075X06
A42Z04-484075X07
A42Z04-484075X08
A42Z04-484075X09
A42Z04-484075X10
A42Z04-484100X03
A42Z04-484100X04
A42Z04-484100X05
A42Z04-484100X06
A42Z04-484100X07
A42Z04-484100X08
A42Z04-484100X09
A42Z04-484100X10
A42Z04-484113X04
A42Z04-484113X05
A42Z04-484113X06
A42Z04-484113X07
A42Z04-484113X08
A42Z04-484113X09
A42Z04-484113X10
Lm
4.213 (107)
5.197 (132)
6.181 (157)
7.165 (182)
8.150 (207)
9.134 (232)
10.118 (257)
11.102 (282)
5.197 (132)
6.181 (157)
7.165 (182)
8.150 (207)
9.134 (232)
10.118 (257)
11.102 (282)
12.087 (307)
5.197 (132)
6.181 (157)
7.165 (182)
8.150 (207)
9.134 (232)
10.118 (257)
11.102 (282)
12.087 (307)
6.220 (158)
7.204 (183)
8.189 (208)
9.173 (233)
10.157 (258)
11.141 (283)
12.126 (308)
2.244 (57)
2.244 (57)
2.244 (57)
2.244 (57)
2.244 (57)
2.244 (57)
2.244 (57)
2.244 (57)
2.244 (57)
2.244 (57)
2.244 (57)
2.244 (57)
2.244 (57)
2.244 (57)
2.244 (57)
2.244 (57)
2.244 (57)
2.244 (57)
2.244 (57)
2.244 (57)
2.244 (57)
2.244 (57)
2.244 (57)
2.244 (57)
2.283 (58)
2.283 (58)
2.283 (58)
2.283 (58)
2.283 (58)
2.283 (58)
2.283 (58)
1.969 (50)
2.953 (75)
3.937 (100)
4.921 (125)
5.906 (150)
6.890 (175)
7.874 (200)
8.858 (225)
2.953 (75)
3.937 (100)
4.921 (125)
5.906 (150)
6.890 (175)
7.874 (200)
8.858 (225)
9.843 (250)
2.953 (75)
3.937 (100)
4.921 (125)
5.906 (150)
6.890 (175)
7.874 (200)
8.858 (225)
9.843 (250)
3.937 (100)
4.921 (125)
5.906 (150)
6.890 (175)
7.874 (200)
8.858 (225)
9.843 (250)
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
3/4-10
3/4-10
3/4-10
3/4-10
3/4-10
3/4-10
3/4-10
3/4-10
1-8
1-8
1-8
1-8
1-8
1-8
1-8
1-8
1 1/8-7
1 1/8-7
1 1/8-7
1 1/8-7
1 1/8-7
1 1/8-7
1 1/8-7
Wrench Max. Static

Load
Size
lbf (N)
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
1
1
1
1
1
1
1
7868 (35000)
7868 (35000)
7868 (35000)
7868 (35000)
7868 (35000)
7868 (35000)
7868 (35000)
7868 (35000)
7868 (35000)
7868 (35000)
7868 (35000)
7868 (35000)
7868 (35000)
7868 (35000)
7868 (35000)
7868 (35000)
7868 (35000)
7868 (35000)
7868 (35000)
7868 (35000)
7868 (35000)
7868 (35000)
7868 (35000)
7868 (35000)
7868 (35000)
7868 (35000)
7868 (35000)
7868 (35000)
7868 (35000)
7868 (35000)
7868 (35000)
7
8
9
10
11
12
13
14
15
16-17
NEW
I
R
T

3.27" BASE
FIXED SCREW
THERMAL RESISTANT
Inch
MATERIAL:
1
2
3
4


M
FEATURES:

Low Cost.
Lm
WRENCHES:
FLATS OR HEX FOR

WRENCH SIZE 5/8
5
HEX
6
7
8
9
10
11
12
13
14
15
2.20 (56)
3.27 (83)
FLAT
INCH COMPONENT
Catalog Number
Standard
Hex
A42Z07-327038X02
A42Z07-327038X03
A42Z07-327038X04
A42Z07-327038X05
A42Z07-327050X02
A42Z07-327050X03
A42Z07-327050X04
A42Z07-327050X05
A42Z07-327063X02
A42Z07-327063X03
A42Z07-327063X04
A42Z07-327063X05
A42Z07-327063X06
A42Z07-327063X07
A42Z07-327063X08
Flat
A42Z07-327075X03
A42Z07-327075X04
A42Z07-327075X05
A42Z07-327075X06
A42Z07-327075X07
A42Z07-327075X08
A42Z07-327075X09
Lm
Max. Static
Load
A42Z08-327038X02
A42Z08-327038X03
A42Z08-327038X04
A42Z08-327038X05
A42Z08-327050X02
A42Z08-327050X03
A42Z08-327050X04
A42Z08-327050X05
A42Z08-327063X02
A42Z08-327063X03
A42Z08-327063X04
A42Z08-327063X05
A42Z08-327063X06
A42Z08-327063X07
A42Z08-327063X08
3.386 (86)
4.370 (111)
5.354 (136)
6.338 (161)
3.386 (86)
4.370 (111)
5.354 (136)
6.338 (161)
3.386 (86)
4.370 (111)
5.354 (136)
6.338 (161)
7.323 (186)
8.307 (211)
9.291 (236)
1.417 (36)
1.417 (36)
1.417 (36)
1.417 (36)
1.417 (36)
1.417 (36)
1.417 (36)
1.417 (36)
1.417 (36)
1.417 (36)
1.417 (36)
1.417 (36)
1.417 (36)
1.417 (36)
1.417 (36)
1.969 (50)
2.953 (75)
3.937 (100)
4.921 (125)
1.969 (50)
2.953 (75)
3.937 (100)
4.921 (125)
1.969 (50)
2.953 (75)
3.937 (100)
4.921 (125)
5.906 (150)
6.890 (175)
7.874 (200)
3/8-16
3/8-16
3/8-16
3/8-16
1/2-13
1/2-13
1/2-13
1/2-13
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
2248 (10000)
2248 (10000)
2248 (10000)
2248 (10000)
3372 (15000)
3372 (15000)
3372 (15000)
3372 (15000)
5620 (25000)
5620 (25000)
5620 (25000)
5620 (25000)
5620 (25000)
5620 (25000)
5620 (25000)
A42Z08-327075X03
A42Z08-327075X04
A42Z08-327075X05
A42Z08-327075X06
A42Z08-327075X07
A42Z08-327075X08
A42Z08-327075X09
4.528 (115)
5.512 (140)
6.496 (165)
7.481 (190)
8.465 (215)
9.449 (240)
10.433 (265)
1.575 (40)
1.575 (40)
1.575 (40)
1.575 (40)
1.575 (40)
1.575 (40)
1.575 (40)
2.953 (75)
3.937 (100)
4.921 (125)
5.906 (150)
6.890 (175)
7.874 (200)
8.858 (225)
3/4-10
3/4-10
3/4-10
3/4-10
3/4-10
3/4-10
3/4-10
5620 (25000)
5620 (25000)
5620 (25000)
5620 (25000)
5620 (25000)
5620 (25000)
5620 (25000)
Nonslip
NEW
(2X) .33 (8.5)

FOR THROUGH HOLE
A 1.102 (28)
16-18
lbf (N)

4.06" BASE
FIXED SCREW
THERMAL RESISTANT
R
Inch
MATERIAL:


FEATURES:

Low Cost.
Lm
FLATS FOR WRENCH
(2X) .49 (12.5)

FOR THROUGH HOLE
A 1.299 (33)
2.87 (73)
4.06 (103)
INCH COMPONENT
Catalog Number
Standard
Nonslip
A42Z07-406063X02
A42Z07-406063X03
A42Z07-406063X04
A42Z07-406063X05
A42Z07-406063X06
A42Z07-406063X07
A42Z07-406063X08
A42Z07-406063X09
A42Z07-406075X03
A42Z07-406075X04
A42Z07-406075X05
A42Z07-406075X06
A42Z07-406075X07
A42Z07-406075X08
A42Z07-406075X09
A42Z07-406100X03
A42Z07-406100X04
A42Z07-406100X05
A42Z07-406100X06
A42Z07-406100X07
A42Z07-406100X08
A42Z07-406100X09
A42Z08-406063X02
A42Z08-406063X03
A42Z08-406063X04
A42Z08-406063X05
A42Z08-406063X06
A42Z08-406063X07
A42Z08-406063X08
A42Z08-406063X09
A42Z08-406075X03
A42Z08-406075X04
A42Z08-406075X05
A42Z08-406075X06
A42Z08-406075X07
A42Z08-406075X08
A42Z08-406075X09
A42Z08-406100X03
A42Z08-406100X04
A42Z08-406100X05
A42Z08-406100X06
A42Z08-406100X07
A42Z08-406100X08
A42Z08-406100X09
Lm
3.741 (95)
4.725 (120)
5.709 (145)
6.693 (170)
7.678 (195)
8.662 (220)
9.646 (245)
10.630 (270)
4.725 (120)
5.709 (145)
6.693 (170)
7.678 (195)
8.662 (220)
9.646 (245)
10.630 (270)
4.803 (122)
5.787 (147)
6.771 (172)
7.756 (197)
8.740 (222)
9.724 (247)
10.708 (272)
1.772 (45)
1.772 (45)
1.772 (45)
1.772 (45)
1.772 (45)
1.772 (45)
1.772 (45)
1.772 (45)
1.772 (45)
1.772 (45)
1.772 (45)
1.772 (45)
1.772 (45)
1.772 (45)
1.772 (45)
1.850 (47)
1.850 (47)
1.850 (47)
1.850 (47)
1.850 (47)
1.850 (47)
1.850 (47)
1.969 (50)
2.953 (75)
3.937 (100)
4.921 (125)
5.906 (150)
6.890 (175)
7.874 (200)
8.858 (225)
2.953 (75)
3.937 (100)
4.921 (125)
5.906 (150)
6.890 (175)
7.874 (200)
8.858 (225)
2.953 (75)
3.937 (100)
4.921 (125)
5.906 (150)
6.890 (175)
7.874 (200)
8.858 (225)
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
3/4-10
3/4-10
3/4-10
3/4-10
3/4-10
3/4-10
3/4-10
1-8
1-8
1-8
1-8
1-8
1-8
1-8
Wrench Max. Static

Load
Size
lbf (N)
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7868 (35000)
7868 (35000)
7868 (35000)
7868 (35000)
7868 (35000)
7868 (35000)
7868 (35000)
7868 (35000)
7868 (35000)
7868 (35000)
7868 (35000)
7868 (35000)
7868 (35000)
7868 (35000)
7868 (35000)
7868 (35000)
7868 (35000)
7868 (35000)
7868 (35000)
7868 (35000)
7868 (35000)
7868 (35000)
8
9
10
11
12
13
14
15
16-19
NEW
I
R
T

4.84" BASE
FIXED SCREW
THERMAL RESISTANT
Inch
MATERIAL:
1
2
3
4

Standard:
+23F to +248F (-5C to +120C)
Nonslip:
+23F to +230F (-5C to +110C)
Lm
L
FEATURES:

Low Cost.
FLATS FOR WRENCH

(2X) .49 (12.5)
FOR THROUGH HOLE
1.457 (37)
1.969 (50)
5
6
7
8
9
10
11
12
13
14
15
3.42 (87)
4.84 (123)
INCH COMPONENT
Catalog Number
Standard
Nonslip
A42Z07-484063X02
A42Z07-484063X03
A42Z07-484063X04
A42Z07-484063X05
A42Z07-484063X06
A42Z07-484063X07
A42Z07-484063X08
A42Z07-484063X09
A42Z07-484075X03
A42Z07-484075X04
A42Z07-484075X05
A42Z07-484075X06
A42Z07-484075X07
A42Z07-484075X08
A42Z07-484075X09
A42Z07-484100X03
A42Z07-484100X04
A42Z07-484100X05
A42Z07-484100X06
A42Z07-484100X07
A42Z07-484100X08
A42Z07-484100X09
A42Z07-484100X10
A42Z07-484113X04
A42Z07-484113X05
A42Z07-484113X06
A42Z07-484113X07
A42Z07-484113X08
A42Z07-484113X09
A42Z07-484113X10
A42Z08-484063X02
A42Z08-484063X03
A42Z08-484063X04
A42Z08-484063X05
A42Z08-484063X06
A42Z08-484063X07
A42Z08-484063X08
A42Z08-484063X09
A42Z08-484075X03
A42Z08-484075X04
A42Z08-484075X05
A42Z08-484075X06
A42Z08-484075X07
A42Z08-484075X08
A42Z08-484075X09
A42Z08-484100X03
A42Z08-484100X04
A42Z08-484100X05
A42Z08-484100X06
A42Z08-484100X07
A42Z08-484100X08
A42Z08-484100X09
A42Z08-484100X10
A42Z08-484113X04
A42Z08-484113X05
A42Z08-484113X06
A42Z08-484113X07
A42Z08-484113X08
A42Z08-484113X09
A42Z08-484113X10
NEW
16-20
Lm
Wrench
Size
Max. Static
Load
3.938 (100)
4.921 (125)
5.906 (150)
6.890 (175)
7.874 (200)
8.858 (225)
9.843 (250)
10.827 (275)
4.921 (125)
5.906 (150)
6.890 (175)
7.874 (200)
8.858 (225)
9.843 (250)
10.827 (275)
4.921 (125)
5.906 (150)
6.890 (175)
7.874 (200)
8.858 (225)
9.843 (250)
10.827 (275)
11.812 (300)
5.906 (150)
6.890 (175)
7.874 (200)
8.858 (225)
9.843 (250)
10.827 (275)
11.812 (300)
1.969 (50)
2.953 (75)
3.937 (100)
4.921 (125)
5.906 (150)
6.890 (175)
7.874 (200)
8.858 (225)
2.953 (75)
3.937 (100)
4.921 (125)
5.906 (150)
6.890 (175)
7.874 (200)
8.858 (225)
2.953 (75)
3.937 (100)
4.921 (125)
5.906 (150)
6.890 (175)
7.874 (200)
8.858 (225)
9.843 (250)
3.937 (100)
4.921 (125)
5.906 (150)
6.890 (175)
7.874 (200)
8.858 (225)
9.843 (250)
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
3/4-10
3/4-10
3/4-10
3/4-10
3/4-10
3/4-10
3/4-10
1-8
1-8
1-8
1-8
1-8
1-8
1-8
1-8
1 1/8-7
1 1/8-7
1 1/8-7
1 1/8-7
1 1/8-7
1 1/8-7
1 1/8-7
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
1
1
1
1
1
1
1
10116 (45000)
10116 (45000)
10116 (45000)
10116 (45000)
10116 (45000)
10116 (45000)
10116 (45000)
10116 (45000)
10116 (45000)
10116 (45000)
10116 (45000)
10116 (45000)
10116 (45000)
10116 (45000)
10116 (45000)
10116 (45000)
10116 (45000)
10116 (45000)
10116 (45000)
10116 (45000)
10116 (45000)
10116 (45000)
10116 (45000)
10116 (45000)
10116 (45000)
10116 (45000)
10116 (45000)
10116 (45000)
10116 (45000)
10116 (45000)
lbf (N)
FOOT MOUNTS STAINLESS STEEL

1.57" BASE
30 ARTICULATION
CORROSION RESISTANT
CHEMICAL RESISTANT
R
Inch
MATERIAL:
Foot and Screw - 304 Stainless Steel

Standard: -40F to +338F (-40C to +170C)

Nonslip: -13F to +230F (-25C to +110C)
FEATURES:

APPLICATIONS:
Damp and Corrosive Environments

Chemical and Pharmaceutical Industries
Wine and Food Industries
4
5
30
M
6
7
Lm
L
WRENCH SIZE 1/2
9
.984 (25)
.571 (14.5)
10
1.57 (40)
11
INCH COMPONENT
Catalog Number
Standard
Nonslip
A40X01-157025X01
A40X01-157025X02
A40X01-157025X03
A40X01-157025X04
A40X01-157038X01
A40X01-157038X02
A40X01-157038X03
A40X01-157038X04
A40X01-157038X05
A40X02-157025X01
A40X02-157025X02
A40X02-157025X03
A40X02-157025X04
A40X02-157038X01
A40X02-157038X02
A40X02-157038X03
A40X02-157038X04
A40X02-157038X05
Lm
Max. Static
Load
1.969 (50)
2.953 (75)
3.937 (100)
4.921 (125)
1.969 (50)
2.953 (75)
3.937 (100)
4.921 (125)
5.905 (150)
.984 (25)
1.969 (50)
2.953 (75)
3.937 (100)
.984 (25)
1.969 (50)
2.953 (75)
3.937 (100)
4.921 (125)
1/4-20
1/4-20
1/4-20
1/4-20
3/8-16
3/8-16
3/8-16
3/8-16
3/8-16
2248 (10000)
2248 (10000)
2248 (10000)
2248 (10000)
2248 (10000)
2248 (10000)
2248 (10000)
2248 (10000)
2248 (10000)
12
lbf (N)
13
14
15
16-21
NEW
I
R
T

1.97" BASE
30 ARTICULATION
CORROSION RESISTANT
CHEMICAL RESISTANT
Inch
MATERIAL:


FEATURES:

APPLICATIONS:
30

5
6
Lm
L
WRENCH SIZE 5/8
1.102 (28)
.630 (16)
9
10
1.97 (50)
INCH COMPONENT
Catalog Number
11
12
13
14
15
NEW
Standard
Nonslip
A40X01-197038X01
A40X01-197038X02
A40X01-197038X03
A40X01-197038X04
A40X01-197038X05
A40X01-197050X01
A40X01-197050X02
A40X01-197050X03
A40X01-197050X04
A40X01-197050X05
A40X01-197063X01
A40X01-197063X02
A40X01-197063X03
A40X01-197063X04
A40X01-197063X05
A40X02-197038X01
A40X02-197038X02
A40X02-197038X03
A40X02-197038X04
A40X02-197038X05
A40X02-197050X01
A40X02-197050X02
A40X02-197050X03
A40X02-197050X04
A40X02-197050X05
A40X02-197063X01
A40X02-197063X02
A40X02-197063X03
A40X02-197063X04
A40X02-197063X05
16-22
Lm
Max. Static
Load
2.086 (53)
3.071 (78)
4.055 (103)
5.039 (128)
6.023 (153)
2.086 (53)
3.071 (78)
4.055 (103)
5.039 (128)
6.023 (153)
2.086 (53)
3.071 (78)
4.055 (103)
5.039 (128)
6.023 (153)
.984 (25)
1.969 (50)
2.953 (75)
3.937 (100)
4.921 (125)
.984 (25)
1.969 (50)
2.953 (75)
3.937 (100)
4.921 (125)
.984 (25)
1.969 (50)
2.953 (75)
3.937 (100)
4.921 (125)
3/8-16
3/8-16
3/8-16
3/8-16
3/8-16
1/2-13
1/2-13
1/2-13
1/2-13
1/2-13
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
3372 (15000)
3372 (15000)
3372 (15000)
3372 (15000)
3372 (15000)
3372 (15000)
3372 (15000)
3372 (15000)
3372 (15000)
3372 (15000)
3372 (15000)
3372 (15000)
3372 (15000)
3372 (15000)
3372 (15000)
lbf (N)

2.56" BASE
30 ARTICULATION
CORROSION RESISTANT
CHEMICAL RESISTANT
R
Inch
MATERIAL:


FEATURES:

APPLICATIONS:

30
WRENCHES:
5
6
Lm
HEX
L
FLAT
FLATS OR HEX
FOR WRENCH SIZE 5/8
8
.670 (17)
2.56 (65)
10
INCH COMPONENT
Catalog Number
Standard
Hex
A40X01-256063X02
A40X01-256063X03
A40X01-256063X04
A40X01-256063X05
A40X01-256063X06
Flat
A40X01-256075X02
A40X01-256075X03
A40X01-256075X04
A40X01-256075X05
A40X01-256075X06
A40X01-256075X07
Nonslip
Lm
Max. Static
Load
lbf (N)
A40X02-256063X02
A40X02-256063X03
A40X02-256063X04
A40X02-256063X05
A40X02-256063X06
3.150 (80)
4.134 (105)
5.118 (130)
6.102 (155)
7.087 (180)
1.181 (30)
1.181 (30)
1.181 (30)
1.181 (30)
1.181 (30)
1.969 (50)
2.953 (75)
3.937 (100)
4.921 (125)
5.906 (150)
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
4496 (20000)
4496 (20000)
4496 (20000)
4496 (20000)
4496 (20000)
A40X02-256075X02
A40X02-256075X03
A40X02-256075X04
A40X02-256075X05
A40X02-256075X06
A40X02-256075X07
3.327 (84.5)
4.311 (109.5)
5.295 (134.5)
6.279 (159.5)
7.264 (184.5)
8.248 (209.5)
1.358 (34.5)
1.358 (34.5)
1.358 (34.5)
1.358 (34.5)
1.358 (34.5)
1.358 (34.5)
1.969 (50)
2.953 (75)
3.937 (100)
4.921 (125)
5.906 (150)
6.890 (175)
3/4-10
3/4-10
3/4-10
3/4-10
3/4-10
3/4-10
4496 (20000)
4496 (20000)
4496 (20000)
4496 (20000)
4496 (20000)
4496 (20000)
11
12
13
14
15
16-23
NEW
I
R
T

3.15" BASE
30 ARTICULATION
CORROSION RESISTANT
CHEMICAL RESISTANT
Inch
MATERIAL:


FEATURES:

30
APPLICATIONS:

WRENCHES:
Lm
6
HEX
7
8
FLATS OR HEX FOR

WRENCH SIZE 5/8
1.417 (36)
.768 (19.5)
FLAT
3.15 (80)
9
10
11
12
13
14
15
NEW
INCH COMPONENT
Catalog Number
Standard
Hex
A40X01-315063X02
A40X01-315063X03
A40X01-315063X04
A40X01-315063X05
A40X01-315063X06
A40X01-315063X07
A40X01-315063X08
Flat
A40X01-315075X03
A40X01-315075X04
A40X01-315075X05
A40X01-315075X06
A40X01-315075X07
A40X01-315075X08
A40X01-315075X09
Lm
Max. Static
Load
A40X02-315063X02
A40X02-315063X03
A40X02-315063X04
A40X02-315063X05
A40X02-315063X06
A40X02-315063X07
A40X02-315063X08
3.386 (86)
4.370 (111)
5.354 (136)
6.338 (161)
7.323 (186)
8.307 (211)
9.291 (236)
1.969 (50)
2.953 (75)
3.937 (100)
4.921 (125)
5.906 (150)
6.890 (175)
7.874 (200)
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
6744 (30000)
6744 (30000)
6744 (30000)
6744 (30000)
6744 (30000)
6744 (30000)
6744 (30000)
A40X02-315075X03
A40X02-315075X04
A40X02-315075X05
A40X02-315075X06
A40X02-315075X07
A40X02-315075X08
A40X02-315075X09
4.370 (111)
5.354 (136)
6.338 (161)
7.323 (186)
8.307 (211)
9.291 (236)
10.275 (261)
2.953 (75)
3.937 (100)
4.921 (125)
5.906 (150)
6.890 (175)
7.874 (200)
8.858 (225)
3/4-10
3/4-10
3/4-10
3/4-10
3/4-10
3/4-10
3/4-10
6744 (30000)
6744 (30000)
6744 (30000)
6744 (30000)
6744 (30000)
6744 (30000)
6744 (30000)
Nonslip
16-24
lbf (N)

3.94" BASE
30 ARTICULATION
CORROSION RESISTANT
CHEMICAL RESISTANT
R
Inch
MATERIAL:

Standard:
-40F to +338F (-40C to +170C)
Nonslip:
-13F to +230F (-25C to +110C)
30
M
FEATURES:

APPLICATIONS:

Lm
L
FLATS
FOR
WRENCH
.787 (20)
3.94 (100)
INCH COMPONENT
Catalog Number
Standard
Nonslip
A40X01-394063X02
A40X01-394063X03
A40X01-394063X04
A40X01-394063X05
A40X01-394063X06
A40X01-394063X07
A40X01-394063X08
A40X01-394075X03
A40X01-394075X04
A40X01-394075X05
A40X01-394075X06
A40X01-394075X07
A40X01-394075X08
A40X01-394075X09
A40X01-394075X10
A40X01-394100X03
A40X01-394100X04
A40X01-394100X05
A40X01-394100X06
A40X01-394100X07
A40X01-394100X08
A40X01-394100X09
A40X01-394100X10
A40X02-394063X02
A40X02-394063X03
A40X02-394063X04
A40X02-394063X05
A40X02-394063X06
A40X02-394063X07
A40X02-394063X08
A40X02-394075X03
A40X02-394075X04
A40X02-394075X05
A40X02-394075X06
A40X02-394075X07
A40X02-394075X08
A40X02-394075X09
A40X02-394075X10
A40X02-394100X03
A40X02-394100X04
A40X02-394100X05
A40X02-394100X06
A40X02-394100X07
A40X02-394100X08
A40X02-394100X09
A40X02-394100X10
8
L
Lm
3.662 (93)
4.646 (118)
5.630 (143)
6.614 (168)
7.599 (193)
8.583 (218)
9.567 (243)
4.646 (118)
5.630 (143)
6.614 (168)
7.599 (193)
8.583 (218)
9.567 (243)
10.551 (268)
11.536 (293)
4.685 (119)
5.669 (144)
6.653 (169)
7.638 (199)
8.622 (219)
9.606 (244)
10.590 (269)
11.575 (294)
1.693 (43)
1.693 (43)
1.693 (43)
1.693 (43)
1.693 (43)
1.693 (43)
1.693 (43)
1.693 (43)
1.693 (43)
1.693 (43)
1.693 (43)
1.693 (43)
1.693 (43)
1.693 (43)
1.693 (43)
1.732 (44)
1.732 (44)
1.732 (44)
1.732 (44)
1.732 (44)
1.732 (44)
1.732 (44)
1.732 (44)
1.969 (50)
2.953 (75)
3.937 (100)
4.921 (125)
5.906 (150)
6.890 (175)
7.874 (200)
2.953 (75)
3.937 (100)
4.921 (125)
5.906 (150)
6.890 (175)
7.874 (200)
8.858 (225)
9.843 (250)
2.953 (75)
3.937 (100)
4.921 (125)
5.906 (150)
6.890 (175)
7.874 (200)
8.858 (225)
9.843 (250)
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
3/4-10
3/4-10
3/4-10
3/4-10
3/4-10
3/4-10
3/4-10
3/4-10
1-8
1-8
1-8
1-8
1-8
1-8
1-8
1-8
Wrench Max. Static

Load
Size
lbf (N)
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7868 (35000)
7868 (35000)
7868 (35000)
7868 (35000)
7868 (35000)
7868 (35000)
7868 (35000)
10116 (45000)
10116 (45000)
10116 (45000)
10116 (45000)
10116 (45000)
10116 (45000)
10116 (45000)
10116 (45000)
12364 (55000)
12364 (55000)
12364 (55000)
12364 (55000)
12364 (55000)
12364 (55000)
12364 (55000)
12364 (55000)
16-25
9
10
11
12
13
14
15
NEW
I
R
T

4.72" BASE
30 ARTICULATION
CORROSION RESISTANT
CHEMICAL RESISTANT
Inch
MATERIAL:
30

2
3
4
5
6
7
8
9
10
11
12
13
14
15
Standard:
-40F to +338F (-40C to +170C)
Nonslip:
-13F to +230F (-25C to +110C)
FEATURES:

APPLICATIONS:

L
FLATS
FOR
WRENCH
A
.906 (23)
4.72 (120)
INCH COMPONENT
Catalog Number
Standard
Nonslip
A40X01-472063X02
A40X01-472063X03
A40X01-472063X04
A40X01-472063X05
A40X01-472063X06
A40X01-472063X07
A40X01-472063X08
A40X01-472075X03
A40X01-472075X04
A40X01-472075X05
A40X01-472075X06
A40X01-472075X07
A40X01-472075X08
A40X01-472075X09
A40X01-472075X10
A40X01-472100X03
A40X01-472100X04
A40X01-472100X05
A40X01-472100X06
A40X01-472100X07
A40X01-472100X08
A40X01-472100X09
A40X01-472100X10
A40X01-472113X04
A40X01-472113X05
A40X01-472113X06
A40X01-472113X07
A40X01-472113X08
A40X01-472113X09
A40X01-472113X10
A40X02-472063X02
A40X02-472063X03
A40X02-472063X04
A40X02-472063X05
A40X02-472063X06
A40X02-472063X07
A40X02-472063X08
A40X02-472075X03
A40X02-472075X04
A40X02-472075X05
A40X02-472075X06
A40X02-472075X07
A40X02-472075X08
A40X02-472075X09
A40X02-472075X10
A40X02-472100X03
A40X02-472100X04
A40X02-472100X05
A40X02-472100X06
A40X02-472100X07
A40X02-472100X08
A40X02-472100X09
A40X02-472100X10
A40X02-472113X04
A40X02-472113X05
A40X02-472113X06
A40X02-472113X07
A40X02-472113X08
A40X02-472113X09
A40X02-472113X10
NEW
Lm
16-26
Lm
3.780 (96)
4.764 (121)
5.748 (146)
6.732 (171)
7.717 (196)
8.701 (221)
9.685 (246)
4.764 (121)
5.748 (146)
6.732 (171)
7.717 (196)
8.701 (221)
9.685 (246)
10.669 (271)
11.654 (296)
4.803 (122)
5.787 (147)
6.771 (172)
7.756 (197)
8.740 (222)
9.724 (247)
10.708 (272)
11.693 (297)
5.787 (147)
6.771 (172)
7.756 (197)
8.740 (222)
9.724 (247)
10.708 (272)
11.693 (297)
1.811 (46)
1.811 (46)
1.811 (46)
1.811 (46)
1.811 (46)
1.811 (46)
1.811 (46)
1.811 (46)
1.811 (46)
1.811 (46)
1.811 (46)
1.811 (46)
1.811 (46)
1.811 (46)
1.811 (46)
1.850 (47)
1.850 (47)
1.850 (47)
1.850 (47)
1.850 (47)
1.850 (47)
1.850 (47)
1.850 (47)
1.850 (47)
1.850 (47)
1.850 (47)
1.850 (47)
1.850 (47)
1.850 (47)
1.850 (47)
1.969 (50)
2.953 (75)
3.937 (100)
4.921 (125)
5.906 (150)
6.890 (175)
7.874 (200)
2.953 (75)
3.937 (100)
4.921 (125)
5.906 (150)
6.890 (175)
7.874 (200)
8.858 (225)
9.843 (250)
2.953 (75)
3.937 (100)
4.921 (125)
5.906 (150)
6.890 (175)
7.874 (200)
8.858 (225)
9.843 (250)
3.937 (100)
4.921 (125)
5.906 (150)
6.890 (175)
7.874 (200)
8.858 (225)
9.843 (250)
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
3/4-10
3/4-10
3/4-10
3/4-10
3/4-10
3/4-10
3/4-10
3/4-10
1-8
1-8
1-8
1-8
1-8
1-8
1-8
1-8
1 1/8-7
1 1/8-7
1 1/8-7
1 1/8-7
1 1/8-7
1 1/8-7
1 1/8-7
Static
Wrench Max.
Load
Size
lbf (N)
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
1
1
1
1
1
1
1
7868 (35000)
7868 (35000)
7868 (35000)
7868 (35000)
7868 (35000)
7868 (35000)
7868 (35000)
10116 (45000)
10116 (45000)
10116 (45000)
10116 (45000)
10116 (45000)
10116 (45000)
10116 (45000)
10116 (45000)
12364 (55000)
12364 (55000)
12364 (55000)
12364 (55000)
12364 (55000)
12364 (55000)
12364 (55000)
12364 (55000)
14613 (65000)
14613 (65000)
14613 (65000)
14613 (65000)
14613 (65000)
14613 (65000)
14613 (65000)

5.51" BASE
30 ARTICULATION
CORROSION RESISTANT
CHEMICAL RESISTANT
R
Inch
MATERIAL:


FEATURES:

3
30
APPLICATIONS:

5
Lm
L
FLATS
FOR
WRENCH
1.929 (49)
1.024 (26)
5.51 (140)
INCH COMPONENT
Catalog Number
Standard
Nonslip
A40X01-551075X03
A40X01-551075X04
A40X01-551075X05
A40X01-551075X06
A40X01-551075X07
A40X01-551075X08
A40X01-551100X03
A40X01-551100X04
A40X01-551100X05
A40X01-551100X06
A40X01-551100X07
A40X01-551100X08
A40X01-551113X04
A40X01-551113X05
A40X01-551113X06
A40X01-551113X07
A40X01-551113X08
A40X01-551113X09
A40X01-551113X10
A40X02-551075X03
A40X02-551075X04
A40X02-551075X05
A40X02-551075X06
A40X02-551075X07
A40X02-551075X08
A40X02-551100X03
A40X02-551100X04
A40X02-551100X05
A40X02-551100X06
A40X02-551100X07
A40X02-551100X08
A40X02-551113X04
A40X02-551113X05
A40X02-551113X06
A40X02-551113X07
A40X02-551113X08
A40X02-551113X09
A40X02-551113X10
Lm
Wrench
Size
4.882 (124)
5.866 (149)
6.850 (174)
7.835 (199)
8.819 (224)
9.803 (249)
4.882 (124)
5.866 (149)
6.850 (174)
7.835 (199)
8.819 (224)
9.803 (249)
5.866 (149)
6.850 (174)
7.835 (199)
8.819 (224)
9.803 (249)
10.787 (274)
11.772 (299)
2.953 (75)
3.937 (100)
4.921 (125)
5.906 (150)
6.890 (175)
7.874 (200)
2.953 (75)
3.937 (100)
4.921 (125)
5.906 (150)
6.890 (175)
7.874 (200)
3.937 (100)
4.921 (125)
5.906 (150)
6.890 (175)
7.874 (200)
8.858 (225)
9.843 (250)
3/4-10
3/4-10
3/4-10
3/4-10
3/4-10
3/4-10
1-8
1-8
1-8
1-8
1-8
1-8
1 1/8-7
1 1/8-7
1 1/8-7
1 1/8-7
1 1/8-7
1 1/8-7
1 1/8-7
3/4
3/4
3/4
3/4
3/4
3/4
7/8
7/8
7/8
7/8
7/8
7/8
1
1
1
1
1
1
1
Max. Static
Load
lbf (N)
11240 (50000)
11240 (50000)
11240 (50000)
11240 (50000)
11240 (50000)
11240 (50000)
13488 (60000)
13488 (60000)
13488 (60000)
13488 (60000)
13488 (60000)
13488 (60000)
15737 (70000)
15737 (70000)
15737 (70000)
15737 (70000)
15737 (70000)
15737 (70000)
15737 (70000)
10
11
12
13
14
15
16-27
NEW
I
R
T

1.97" BASE
10 ARTICULATION
CORROSION RESISTANT
CHEMICAL RESISTANT
Inch
MATERIAL:

2
3
4
5
-13F to +230F (-25C to +110C)
FEATURES:
80 Shore Vulcanized Rubber Base.

APPLICATIONS:

WRENCHES:
10
M
HEX
Lm
7
L
9
10
11
NEW
1.97 (50)
Catalog Number
Lm
Max. Static
Load
A40X03-197038X02
A40X03-197038X03
A40X03-197038X04
A40X03-197038X05
A40X03-197050X02
A40X03-197050X03
A40X03-197050X04
A40X03-197050X05
3.111 (79)
4.095 (104)
5.079 (129)
6.063 (154)
3.111 (79)
4.095 (104)
5.079 (129)
6.063 (154)
1.142 (29)
1.142 (29)
1.142 (29)
1.142 (29)
1.142 (29)
1.142 (29)
1.142 (29)
1.142 (29)
1.969 (50)
2.953 (75)
3.937 (100)
4.921 (125)
1.969 (50)
2.953 (75)
3.937 (100)
4.921 (125)
3/8-16
3/8-16
3/8-16
3/8-16
1/2-13
1/2-13
1/2-13
1/2-13
899 (4000)
899 (4000)
899 (4000)
899 (4000)
899 (4000)
899 (4000)
899 (4000)
899 (4000)
A40X03-197063X03
A40X03-197063X04
A40X03-197063X05
A40X03-197063X06
4.292 (109)
5.276 (134)
6.260 (159)
7.245 (184)
1.339 (34)
1.339 (34)
1.339 (34)
1.339 (34)
2.953 (75)
3.937 (100)
4.921 (125)
5.906 (150)
5/8-11
5/8-11
5/8-11
5/8-11
899 (4000)
899 (4000)
899 (4000)
899 (4000)
lbf (N)
Hex
13
15
.748 (19)
INCH COMPONENT
12
14
FLATS OR HEX FOR

WRENCH SIZE 1/2
(SEE BELOW)
FLAT
Flat
16-28

3.15" BASE
10 ARTICULATION
CORROSION RESISTANT
CHEMICAL RESISTANT
R
Inch
MATERIAL:

-13F to +230F (-25C to +110C)
FEATURES:

Shown With Flat
APPLICATIONS:

3
4
10
M
5
6
Lm
L
HEX FOR WRENCH SIZE 1/2
1.378 (35)
.984 (25)
9
3.15 (80)
10
INCH COMPONENT
Catalog Number
Lm
Max. Static
Load
A40X03-315038X02
A40X03-315038X03
A40X03-315038X04
A40X03-315038X05
A40X03-315050X02
A40X03-315050X03
A40X03-315050X04
A40X03-315050X05
A40X03-315050X06
3.347 (85)
4.331 (110)
5.315 (135)
6.299 (160)
3.347 (85)
4.331 (110)
5.315 (135)
6.299 (160)
7.284 (185)
1.969 (50)
2.953 (75)
3.937 (100)
4.921 (125)
1.969 (50)
2.953 (75)
3.937 (100)
4.921 (125)
5.906 (150)
3/8-16
3/8-16
3/8-16
3/8-16
1/2-13
1/2-13
1/2-13
1/2-13
1/2-13
2248 (10000)
2248 (10000)
2248 (10000)
2248 (10000)
2248 (10000)
2248 (10000)
2248 (10000)
2248 (10000)
2248 (10000)
NOTES: 1. Dimensions in ( ) are mm.

2. 3/8-16 and 1/2-13 screws supplied with washer at base.
lbf (N)
11
12
13
14
15
16-29
NEW
I
R
T

3.15" BASE
10 ARTICULATION
CORROSION RESISTANT
CHEMICAL RESISTANT
Inch
MATERIAL:

2
3
4
-13F to +230F (-25C to +110C)
FEATURES:

APPLICATIONS:

10
M
5
Lm
FLATS FOR WRENCH

A
8
9
10
11
12
13
14
15
NEW
.984 (25)
3.15 (80)
INCH COMPONENT
Catalog Number
Lm
Wrench
Size
Max. Static
Load
A40X03-315063X03
A40X03-315063X04
A40X03-315063X05
A40X03-315063X06
A40X03-315063X07
A40X03-315075X03
A40X03-315075X04
A40X03-315075X05
A40X03-315075X06
A40X03-315075X07
A40X03-315075X08
A40X03-315075X09
A40X03-315100X03
A40X03-315100X04
A40X03-315100X05
A40X03-315100X06
A40X03-315100X07
A40X03-315100X08
A40X03-315100X09
4.331 (110)
5.315 (135)
6.299 (160)
7.284 (185)
8.268 (210)
4.449 (113)
5.433 (138)
6.417 (163)
7.402 (188)
8.386 (213)
9.370 (238)
10.354 (263)
4.528 (115)
5.512 (140)
6.496 (165)
7.481 (190)
8.465 (215)
9.449 (240)
10.433 (265)
1.378 (35)
1.378 (35)
1.378 (35)
1.378 (35)
1.378 (35)
1.496 (38)
1.496 (38)
1.496 (38)
1.496 (38)
1.496 (38)
1.496 (38)
1.496 (38)
1.575 (40)
1.575 (40)
1.575 (40)
1.575 (40)
1.575 (40)
1.575 (40)
1.575 (40)
2.953 (75)
3.937 (100)
4.921 (125)
5.906 (150)
6.890 (175)
2.953 (75)
3.937 (100)
4.921 (125)
5.906 (150)
6.890 (175)
7.874 (200)
8.858 (225)
2.953 (75)
3.937 (100)
4.921 (125)
5.906 (150)
6.890 (175)
7.874 (200)
8.858 (225)
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
3/4-10
3/4-10
3/4-10
3/4-10
3/4-10
3/4-10
3/4-10
1-8
1-8
1-8
1-8
1-8
1-8
1-8
1/2
1/2
1/2
1/2
1/2
5/8
5/8
5/8
5/8
5/8
5/8
5/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
2248 (10000)
2248 (10000)
2248 (10000)
2248 (10000)
2248 (10000)
2248 (10000)
2248 (10000)
2248 (10000)
2248 (10000)
2248 (10000)
2248 (10000)
2248 (10000)
2248 (10000)
2248 (10000)
2248 (10000)
2248 (10000)
2248 (10000)
2248 (10000)
2248 (10000)

2. 5/8-11 screw supplied with washer at base.
16-30
lbf (N)

3.94" BASE
10 ARTICULATION
CORROSION RESISTANT
CHEMICAL RESISTANT
R
Inch
MATERIAL:

10
-13F to +230F (-25C to +110C)
FEATURES:

APPLICATIONS:

Lm
L
FLATS FOR WRENCH
A
1.181 (30)
INCH COMPONENT
Catalog Number
A40X03-394063X03
A40X03-394063X04
A40X03-394063X05
A40X03-394063X06
A40X03-394063X07
A40X03-394063X08
A40X03-394075X03
A40X03-394075X04
A40X03-394075X05
A40X03-394075X06
A40X03-394075X07
A40X03-394075X08
A40X03-394075X09
A40X03-394075X10
A40X03-394100X04
A40X03-394100X05
A40X03-394100X06
A40X03-394100X07
A40X03-394100X08
A40X03-394100X09
A40X03-394100X10
A40X03-394113X04
A40X03-394113X05
A40X03-394113X06
A40X03-394113X07
A40X03-394113X08
A40X03-394113X09
A40X03-394113X10
4.508 (114.5)
5.492 (139.5)
6.476 (164.5)
7.461 (189.5)
8.445 (214.5)
9.429 (239.5)
4.646 (118)
5.630 (143)
6.614 (168)
7.599 (193)
8.583 (218)
9.567 (243)
10.551 (268)
11.536 (293)
5.669 (144)
6.653 (169)
7.638 (194)
8.622 (219)
9.606 (244)
10.590 (269)
11.575 (294)
5.669 (144)
6.653 (169)
7.638 (194)
8.622 (219)
9.606 (244)
10.590 (269)
11.575 (294)
3.94 (100)
A
1.555 (39.5)
1.555 (39.5)
1.555 (39.5)
1.555 (39.5)
1.555 (39.5)
1.555 (39.5)
1.693 (43)
1.693 (43)
1.693 (43)
1.693 (43)
1.693 (43)
1.693 (43)
1.693 (43)
1.693 (43)
1.732 (44)
1.732 (44)
1.732 (44)
1.732 (44)
1.732 (44)
1.732 (44)
1.732 (44)
1.732 (44)
1.732 (44)
1.732 (44)
1.732 (44)
1.732 (44)
1.732 (44)
1.732 (44)
Lm
Wrench
Size
Max. Static
Load
2.953 (75)
3.937 (100)
4.921 (125)
5.906 (150)
6.890 (175)
7.874 (200)
2.953 (75)
3.937 (100)
4.921 (125)
5.906 (150)
6.890 (175)
7.874 (200)
8.858 (225)
9.843 (250)
3.937 (100)
4.921 (125)
5.906 (150)
6.890 (175)
7.874 (200)
8.858 (225)
9.843 (250)
3.937 (100)
4.921 (125)
5.906 (150)
6.890 (175)
7.874 (200)
8.858 (225)
9.843 (250)
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
3/4-10
3/4-10
3/4-10
3/4-10
3/4-10
3/4-10
3/4-10
3/4-10
1-8
1-8
1-8
1-8
1-8
1-8
1-8
1 1/8-7
1 1/8-7
1 1/8-7
1 1/8-7
1 1/8-7
1 1/8-7
1 1/8-7
1/2
1/2
1/2
1/2
1/2
1/2
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
1
1
1
1
1
1
1
3372 (15000)
3372 (15000)
3372 (15000)
3372 (15000)
3372 (15000)
3372 (15000)
3372 (15000)
3372 (15000)
3372 (15000)
3372 (15000)
3372 (15000)
3372 (15000)
3372 (15000)
3372 (15000)
3372 (15000)
3372 (15000)
3372 (15000)
3372 (15000)
3372 (15000)
3372 (15000)
3372 (15000)
3372 (15000)
3372 (15000)
3372 (15000)
3372 (15000)
3372 (15000)
3372 (15000)
3372 (15000)
lbf (N)

2. 5/8-11 screw is supplied with washer at base.
16-31
8
9
10
11
12
13
14
15
NEW
I
R
T

4.72" BASE
10 ARTICULATION
CORROSION RESISTANT
CHEMICAL RESISTANT
Inch
MATERIAL:

2
3
4
10
-13F to +230F (-25C to +110C)
FEATURES:

APPLICATIONS:

Lm
L
FLATS FOR WRENCH
5
A
1.260 (32)
INCH COMPONENT
7
8
9
10
11
12
13
14
15
NEW
4.72 (120)
Catalog Number
Lm
Wrench
Size
Max. Static
Load
A40X03-472063X03
A40X03-472063X04
A40X03-472063X05
A40X03-472063X06
A40X03-472063X07
A40X03-472063X08
A40X03-472075X03
A40X03-472075X04
A40X03-472075X05
A40X03-472075X06
A40X03-472075X07
A40X03-472075X08
A40X03-472075X09
A40X03-472075X10
A40X03-472100X04
A40X03-472100X05
A40X03-472100X06
A40X03-472100X07
A40X03-472100X08
A40X03-472100X09
A40X03-472100X10
A40X03-472113X04
A40X03-472113X05
A40X03-472113X06
A40X03-472113X07
A40X03-472113X08
A40X03-472113X09
A40X03-472113X10
4.803 (122)
5.787 (147)
6.771 (172)
7.756 (197)
8.740 (222)
9.724 (247)
4.803 (122)
5.787 (147)
6.771 (172)
7.756 (197)
8.740 (222)
9.724 (247)
10.708 (272)
11.693 (297)
5.787 (147)
6.771 (172)
7.756 (197)
8.740 (222)
9.724 (247)
10.708 (272)
11.693 (297)
5.866 (149)
6.850 (174)
7.835 (199)
8.819 (224)
9.803 (249)
10.787 (274)
11.772 (299)
1.850 (47)
1.850 (47)
1.850 (47)
1.850 (47)
1.850 (47)
1.850 (47)
1.850 (47)
1.850 (47)
1.850 (47)
1.850 (47)
1.850 (47)
1.850 (47)
1.850 (47)
1.850 (47)
1.850 (47)
1.850 (47)
1.850 (47)
1.850 (47)
1.850 (47)
1.850 (47)
1.850 (47)
1.929 (49)
1.929 (49)
1.929 (49)
1.929 (49)
1.929 (49)
1.929 (49)
1.929 (49)
2.953 (75)
3.937 (100)
4.921 (125)
5.906 (150)
6.890 (175)
7.874 (200)
2.953 (75)
3.937 (100)
4.921 (125)
5.906 (150)
6.890 (175)
7.874 (200)
8.858 (225)
9.843 (250)
3.937 (100)
4.921 (125)
5.906 (150)
6.890 (175)
7.874 (200)
8.858 (225)
9.843 (250)
3.937 (100)
4.921 (125)
5.906 (150)
6.890 (175)
7.874 (200)
8.858 (225)
9.843 (250)
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
3/4-10
3/4-10
3/4-10
3/4-10
3/4-10
3/4-10
3/4-10
3/4-10
1-8
1-8
1-8
1-8
1-8
1-8
1-8
1 1/8-7
1 1/8-7
1 1/8-7
1 1/8-7
1 1/8-7
1 1/8-7
1 1/8-7
1/2
1/2
1/2
1/2
1/2
1/2
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
1
1
1
1
1
1
1
6744 (30000)
6744 (30000)
6744 (30000)
6744 (30000)
6744 (30000)
6744 (30000)
6744 (30000)
6744 (30000)
6744 (30000)
6744 (30000)
6744 (30000)
6744 (30000)
6744 (30000)
6744 (30000)
6744 (30000)
6744 (30000)
6744 (30000)
6744 (30000)
6744 (30000)
6744 (30000)
6744 (30000)
6744 (30000)
6744 (30000)
6744 (30000)
6744 (30000)
6744 (30000)
6744 (30000)
6744 (30000)

16-32
lbf (N)

3.15" BASE
10 ARTICULATION
CORROSION RESISTANT
CHEMICAL RESISTANT
R
Inch
MATERIAL:

-13F to +230F (-25C to +110C)
FEATURES:

Mounting Tab.
APPLICATIONS:

4
5
10
M
6
7
Lm
L
9
1.378 (35)
.984 (25)
.59 (15)
3.15 (80)
10
2.12 (53.8)
11
INCH COMPONENT
Catalog Number
Lm
Max. Static
Load
A40X04-315038X02
A40X04-315038X03
A40X04-315038X04
A40X04-315038X05
A40X04-315050X02
A40X04-315050X03
A40X04-315050X04
A40X04-315050X05
A40X04-315050X06
3.347 (85)
4.331 (110)
5.315 (135)
6.299 (160)
3.347 (85)
4.331 (110)
5.315 (135)
6.299 (160)
7.284 (185)
1.969 (50)
2.953 (75)
3.937 (100)
4.921 (125)
1.969 (50)
2.953 (75)
3.937 (100)
4.921 (125)
5.906 (150)
3/8-16
3/8-16
3/8-16
3/8-16
1/2-13
1/2-13
1/2-13
1/2-13
1/2-13
2248 (10000)
2248 (10000)
2248 (10000)
2248 (10000)
2248 (10000)
2248 (10000)
2248 (10000)
2248 (10000)
2248 (10000)

2. 3/8-16, 1/2-13 screws supplied with washer at base.
lbf (N)
16-33
12
13
14
15
NEW
I
R
T

3.15" BASE
10 ARTICULATION
CORROSION RESISTANT
CHEMICAL RESISTANT
Inch
MATERIAL:

2
3
-13F to +230F (-25C to +110C)
FEATURES:

Mounting Tab.
APPLICATIONS:
10

5
Lm
6
L
FLATS FOR WRENCH

A
.59 (15)
.984 (25)
3.15 (80)
9
10
11
12
13
14
15
NEW
INCH COMPONENT
2.12 (53.8)
Catalog Number
Lm
Wrench
Size
Max. Static
Load
A40X04-315063X03
A40X04-315063X04
A40X04-315063X05
A40X04-315063X06
A40X04-315063X07
A40X04-315075X03
A40X04-315075X04
A40X04-315075X05
A40X04-315075X06
A40X04-315075X07
A40X04-315075X08
A40X04-315075X09
A40X04-315100X03
A40X04-315100X04
A40X04-315100X05
A40X04-315100X06
A40X04-315100X07
A40X04-315100X08
A40X04-315100X09
4.331 (110)
5.315 (135)
6.299 (160)
7.284 (185)
8.268 (210)
4.449 (113)
5.433 (138)
6.417 (163)
7.402 (188)
8.386 (213)
9.370 (238)
10.354 (263)
4.528 (115)
5.512 (140)
6.496 (165)
7.481 (190)
8.465 (215)
9.449 (240)
10.433 (265)
1.378 (35)
1.378 (35)
1.378 (35)
1.378 (35)
1.378 (35)
1.496 (38)
1.496 (38)
1.496 (38)
1.496 (38)
1.496 (38)
1.496 (38)
1.496 (38)
1.575 (40)
1.575 (40)
1.575 (40)
1.575 (40)
1.575 (40)
1.575 (40)
1.575 (40)
2.953 (75)
3.937 (100)
4.921 (125)
5.906 (150)
6.890 (175)
2.953 (75)
3.937 (100)
4.921 (125)
5.906 (150)
6.890 (175)
7.874 (200)
8.858 (225)
2.953 (75)
3.937 (100)
4.921 (125)
5.906 (150)
6.890 (175)
7.874 (200)
8.858 (225)
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
3/4-10
3/4-10
3/4-10
3/4-10
3/4-10
3/4-10
3/4-10
1-8
1-8
1-8
1-8
1-8
1-8
1-8
1/2
1/2
1/2
1/2
1/2
5/8
5/8
5/8
5/8
5/8
5/8
5/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
2248 (10000)
2248 (10000)
2248 (10000)
2248 (10000)
2248 (10000)
2248 (10000)
2248 (10000)
2248 (10000)
2248 (10000)
2248 (10000)
2248 (10000)
2248 (10000)
2248 (10000)
2248 (10000)
2248 (10000)
2248 (10000)
2248 (10000)
2248 (10000)
2248 (10000)

2. 5/8-11 screw supplied with washer at base.
16-34
lbf (N)

3.94" BASE
10 ARTICULATION
CORROSION RESISTANT
CHEMICAL RESISTANT
R
Inch
MATERIAL:

-13F to +230F (-25C to +110C)
10
FEATURES:

Mounting Tab.
APPLICATIONS:

L
Lm
4
FLATS FOR WRENCH
.59 (15)
A
3.94 (100)
1.181 (30)
INCH COMPONENT
6
2.72 (69)
Catalog Number
Lm
Wrench
Size
Max. Static
Load
A40X04-394063X03
A40X04-394063X04
A40X04-394063X05
A40X04-394063X06
A40X04-394063X07
A40X04-394063X08
A40X04-394075X03
A40X04-394075X04
A40X04-394075X05
A40X04-394075X06
A40X04-394075X07
A40X04-394075X08
A40X04-394075X09
A40X04-394075X10
A40X04-394100X04
A40X04-394100X05
A40X04-394100X06
A40X04-394100X07
A40X04-394100X08
A40X04-394100X09
A40X04-394100X10
A40X04-394113X04
A40X04-394113X05
A40X04-394113X06
A40X04-394113X07
A40X04-394113X08
A40X04-394113X09
A40X04-394113X10
4.508 (114.5)
5.492 (139.5)
6.476 (164.5)
7.461 (189.5)
8.445 (214.5)
9.429 (239.5)
4.646 (118)
5.630 (143)
6.614 (168)
7.599 (193)
8.583 (218)
9.567 (243)
10.551 (268)
11.536 (293)
5.669 (144)
6.653 (169)
7.638 (194)
8.622 (219)
9.606 (244)
10.590 (269)
11.575 (294)
5.669 (144)
6.653 (169)
7.638 (194)
8.622 (219)
9.606 (244)
10.590 (269)
11.575 (294)
1.555 (39.5)
1.555 (39.5)
1.555 (39.5)
1.555 (39.5)
1.555 (39.5)
1.555 (39.5)
1.693 (43)
1.693 (43)
1.693 (43)
1.693 (43)
1.693 (43)
1.693 (43)
1.693 (43)
1.693 (43)
1.732 (44)
1.732 (44)
1.732 (44)
1.732 (44)
1.732 (44)
1.732 (44)
1.732 (44)
1.732 (44)
1.732 (44)
1.732 (44)
1.732 (44)
1.732 (44)
1.732 (44)
1.732 (44)
2.953 (75)
3.937 (100)
4.921 (125)
5.906 (150)
6.890 (175)
7.874 (200)
2.953 (75)
3.937 (100)
4.921 (125)
5.906 (150)
6.890 (175)
7.874 (200)
8.858 (225)
9.843 (250)
3.937 (100)
4.921 (125)
5.906 (150)
6.890 (175)
7.874 (200)
8.858 (225)
9.843 (250)
3.937 (100)
4.921 (125)
5.906 (150)
6.890 (175)
7.874 (200)
8.858 (225)
9.843 (250)
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
3/4-10
3/4-10
3/4-10
3/4-10
3/4-10
3/4-10
3/4-10
3/4-10
1-8
1-8
1-8
1-8
1-8
1-8
1-8
1 1/8-7
1 1/8-7
1 1/8-7
1 1/8-7
1 1/8-7
1 1/8-7
1 1/8-7
1/2
1/2
1/2
1/2
1/2
1/2
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
1
1
1
1
1
1
1
3372 (15000)
3372 (15000)
3372 (15000)
3372 (15000)
3372 (15000)
3372 (15000)
3372 (15000)
3372 (15000)
3372 (15000)
3372 (15000)
3372 (15000)
3372 (15000)
3372 (15000)
3372 (15000)
3372 (15000)
3372 (15000)
3372 (15000)
3372 (15000)
3372 (15000)
3372 (15000)
3372 (15000)
3372 (15000)
3372 (15000)
3372 (15000)
3372 (15000)
3372 (15000)
3372 (15000)
3372 (15000)
lbf (N)

16-35
8
9
10
11
12
13
14
15
NEW
I
R
T

TEKNOCLEAN
10 ARTICULATION
CORROSION RESISTANT
CHEMICAL RESISTANT
Inch

Base Pad - Vulcanized Rubber
Seal - EPDM Gray Rubber
1.57 (40)
STROKE
-13F to +230F (-25C to +110C)
FEATURES:
3
4
5
USDA Approved Sealed Nut and Joint.

80 Shore Rubber Base.
1.57" Regulation Stroke.
B
D
2.362 (60)
W2
APPLICATIONS:

W1
A
6
7
MATERIAL:
10
O.D.
INCH COMPONENT
Catalog Number
O.D.
10
A45X01-315063
A45X01-315075
A45X01-394063
A45X01-394075
A45X01-394100
A45X01-472063
A45X01-472075
A45X01-472100
3.15 (80)
3.15 (80)
3.94 (100)
3.94 (100)
3.94 (100)
4.72 (120)
4.72 (120)
4.72 (120)
7.520 (191)
7.520 (191)
7.756 (197)
7.756 (197)
7.756 (197)
7.834 (199)
7.834 (199)
7.834 (199)
5/8-11
3/4-10
5/8-11
3/4-10
1-8
5/8-11
3/4-10
1-8
1.890 (48)
1.890 (48)
2.087 (53)
2.087 (53)
2.087 (53)
2.165 (55)
2.165 (55)
2.165 (55)
5.630 (143)
5.630 (143)
5.669 (144)
5.669 (144)
5.669 (144)
5.669 (144)
5.669 (144)
5.669 (144)
11
Catalog Number
(Ref.)
W1
Wrench
Size
W2
Wrench
Size
Max. Static
Load
A45X01-315063
A45X01-315075
A45X01-394063
A45X01-394075
A45X01-394100
A45X01-472063
A45X01-472075
A45X01-472100
.98 (25)
1.18 (30)
.98 (25)
1.18 (30)
1.38 (35)
.98 (25)
1.18 (30)
1.38 (35)
1.181 (30)
1.181 (30)
1.378 (35)
1.378 (35)
1.378 (35)
1.457 (37)
1.457 (37)
1.457 (37)
1/2
5/8
1/2
5/8
7/8
1/2
5/8
7/8
3/4
1
3/4
1
1 1/8
3/4
1
1 1/8
2248 (10000)
2248 (10000)
3372 (15000)
3372 (15000)
3372 (15000)
6744 (30000)
6744 (30000)
6744 (30000)
8
9
12
13
14
15
NEW
16-36
lbf (N)

TEKNOCLEAN
10 ARTICULATION
CORROSION RESISTANT
CHEMICAL RESISTANT
R
Inch
10
MATERIAL:

-13F to +230F (-25C to +110C)
1.57 (40)
STROKE
FEATURES:
USDA Approved.
Sealed Nut.
80 Shore Rubber Base.
1.57" Regulation Stroke.
B
D
2.362 (60)
W2
APPLICATIONS:

W1
A
O.D.
INCH COMPONENT
Catalog Number
O.D.
A45X02-315063A
A45X02-315063B
A45X02-315075
A45X02-394063
A45X02-394075
A45X02-394100
A45X02-394113
A45X02-472063
A45X02-472075
A45X02-472100
A45X02-472113
3.15 (80)
3.15 (80)
3.15 (80)
3.94 (100)
3.94 (100)
3.94 (100)
3.94 (100)
4.72 (120)
4.72 (120)
4.72 (120)
4.72 (120)
6.417 (163)
7.402 (188)
7.402 (188)
7.599 (193)
7.599 (193)
7.638 (194)
7.638 (194)
7.756 (197)
7.756 (197)
7.756 (197)
7.835 (199)
5/8-11
5/8-11
3/4-10
5/8-11
3/4-10
1-8
1 1/8-7
5/8-11
3/4-10
1-8
1 1/8-7
1.496 (38)
1.496 (38)
1.496 (38)
1.693 (43)
1.693 (43)
1.732 (44)
1.732 (44)
1.850 (47)
1.850 (47)
1.850 (47)
1.929 (49)
4.921 (125)
5.906 (150)
5.906 (150)
5.906 (150)
5.906 (150)
5.906 (150)
5.906 (150)
5.906 (150)
5.906 (150)
5.906 (150)
5.906 (150)
Catalog Number
(Ref.)
W1
Wrench
Size
W2
Wrench
Size
Max. Static
Load
A45X02-315063A
A45X02-315063B
A45X02-315075
A45X02-394063
A45X02-394075
A45X02-394100
A45X02-394113
A45X02-472063
A45X02-472075
A45X02-472100
A45X02-472113
.98 (25)
.98 (25)
1.18 (30)
.98 (25)
1.18 (30)
1.38 (35)
1.65 (42)
.98 (25)
1.18 (30)
1.38 (35)
1.65 (42)
.984 (25)
.984 (25)
.984 (25)
1.181 (30)
1.181 (30)
1.181 (30)
1.181 (30)
1.260 (32)
1.260 (32)
1.260 (32)
1.260 (32)
5/8
5/8
5/8
5/8
5/8
7/8
1
5/8
5/8
7/8
1
3/4
3/4
1
3/4
1
1-1/8
1-3/8
3/4
1
1-1/8
1-3/8
2248 (10000)
2248 (10000)
2248 (10000)
3372 (15000)
3372 (15000)
3372 (15000)
3372 (15000)
6744 (30000)
6744 (30000)
6744 (30000)
6744 (30000)
lbf (N)
16-37
8
9
10
11
12
13
14
15
NEW
I
R
T
FOOT MOUNTS STEEL

1.97" BASE
30 ARTICULATION
MILDLY CORROSION RESISTANT
Inch
MATERIAL:
1
2
3
Foot - 1040 Steel, Painted Yellow


FEATURES:

30
5
6
Lm
L

.630 (16)
1.102 (28)
9
10
1.97 (50)
INCH COMPONENT
Catalog Number
11
12
13
14
15
NEW
Standard
Nonslip
A40C01-197038X01
A40C01-197038X02
A40C01-197038X03
A40C01-197038X04
A40C01-197038X05
A40C01-197050X01
A40C01-197050X02
A40C01-197050X03
A40C01-197050X04
A40C01-197050X05
A40C01-197063X01
A40C01-197063X02
A40C01-197063X03
A40C01-197063X04
A40C01-197063X05
A40C02-197038X01
A40C02-197038X02
A40C02-197038X03
A40C02-197038X04
A40C02-197038X05
A40C02-197050X01
A40C02-197050X02
A40C02-197050X03
A40C02-197050X04
A40C02-197050X05
A40C02-197063X01
A40C02-197063X02
A40C02-197063X03
A40C02-197063X04
A40C02-197063X05
16-38
Lm
Max. Static
Load
2.086 (53)
3.071 (78)
4.055 (103)
5.039 (128)
6.023 (153)
2.086 (53)
3.071 (78)
4.055 (103)
5.039 (128)
6.023 (153)
2.086 (53)
3.071 (78)
4.055 (103)
5.039 (128)
6.023 (153)
.984 (25)
1.969 (50)
2.953 (75)
3.937 (100)
4.921 (125)
.984 (25)
1.969 (50)
2.953 (75)
3.937 (100)
4.921 (125)
.984 (25)
1.969 (50)
2.953 (75)
3.937 (100)
4.921 (125)
3/8-16
3/8-16
3/8-16
3/8-16
3/8-16
1/2-13
1/2-13
1/2-13
1/2-13
1/2-13
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
3372 (15000)
3372 (15000)
3372 (15000)
3372 (15000)
3372 (15000)
3372 (15000)
3372 (15000)
3372 (15000)
3372 (15000)
3372 (15000)
3372 (15000)
3372 (15000)
3372 (15000)
3372 (15000)
3372 (15000)
lbf (N)
FOOT MOUNTS STEEL

2.56" BASE
30 ARTICULATION
R
Inch
MATERIAL:


FEATURES:

30
WRENCHES:
HEX
Lm
L
FLAT
FLATS OR HEX FOR

WRENCH SIZE 5/8
.669 (17)
1.181 (30)
2.56 (65)
10
INCH COMPONENT
Catalog Number
Standard
Hex
A40C01-256063X02
A40C01-256063X03
A40C01-256063X04
A40C01-256063X05
A40C01-256063X06
Flat
A40C01-256075X02
A40C01-256075X03
A40C01-256075X04
A40C01-256075X05
A40C01-256075X06
A40C01-256075X07
Lm
Max. Static
Load
A40C02-256063X02
A40C02-256063X03
A40C02-256063X04
A40C02-256063X05
A40C02-256063X06
3.150 (80)
4.134 (105)
5.118 (130)
6.102 (155)
7.087 (180)
1.969 (50)
2.953 (75)
3.937 (100)
4.921 (125)
5.906 (150)
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
4496 (20000)
4496 (20000)
4496 (20000)
4496 (20000)
4496 (20000)
A40C02-256075X02
A40C02-256075X03
A40C02-256075X04
A40C02-256075X05
A40C02-256075X06
A40C02-256075X07
3.150 (80)
4.134 (105)
5.118 (130)
6.102 (155)
7.087 (180)
8.071 (205)
1.969 (50)
2.953 (75)
3.937 (100)
4.921 (125)
5.906 (150)
6.890 (175)
3/4-10
3/4-10
3/4-10
3/4-10
3/4-10
3/4-10
4496 (20000)
4496 (20000)
4496 (20000)
4496 (20000)
4496 (20000)
4496 (20000)
Nonslip
lbf (N)
11
12
13
14
15
16-39
NEW
I
R
T
FOOT MOUNTS STEEL

3.15" BASE
30 ARTICULATION
Inch
MATERIAL:
1
2
3
4
5


FEATURES:

30
WRENCHES:
HEX
Lm
6
7
L
FLATS OR HEX FOR
WRENCH SIZE 5/8
FLAT
.768 (19.5)
A
3.15 (80)
9
10
11
12
13
14
15
NEW
INCH COMPONENT
Catalog Number
Standard
Hex
A40C01-315063X02
A40C01-315063X03
A40C01-315063X04
A40C01-315063X05
A40C01-315063X06
A40C01-315063X07
A40C01-315063X08
Flat
A40C01-315075X03
A40C01-315075X04
A40C01-315075X05
A40C01-315075X06
A40C01-315075X07
A40C01-315075X08
A40C01-315075X09
Lm
Max. Static
Load
A40C02-315063X02
A40C02-315063X03
A40C02-315063X04
A40C02-315063X05
A40C02-315063X06
A40C02-315063X07
A40C02-315063X08
3.268 (83)
4.252 (108)
5.236 (133)
6.220 (158)
7.205 (183)
8.189 (208)
9.173 (233)
1.299 (33)
1.299 (33)
1.299 (33)
1.299 (33)
1.299 (33)
1.299 (33)
1.299 (33)
1.969 (50)
2.953 (75)
3.937 (100)
4.921 (125)
5.906 (150)
6.890 (175)
7.874 (200)
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
6744 (30000)
6744 (30000)
6744 (30000)
6744 (30000)
6744 (30000)
6744 (30000)
6744 (30000)
A40C02-315075X03
A40C02-315075X04
A40C02-315075X05
A40C02-315075X06
A40C02-315075X07
A40C02-315075X08
A40C02-315075X09
4.370 (111)
5.354 (136)
6.338 (161)
7.323 (186)
8.307 (211)
9.291 (236)
10.275 (261)
1.417 (36)
1.417 (36)
1.417 (36)
1.417 (36)
1.417 (36)
1.417 (36)
1.417 (36)
2.953 (75)
3.937 (100)
4.921 (125)
5.906 (150)
6.890 (175)
7.874 (200)
8.858 (225)
3/4-10
3/4-10
3/4-10
3/4-10
3/4-10
3/4-10
3/4-10
6744 (30000)
6744 (30000)
6744 (30000)
6744 (30000)
6744 (30000)
6744 (30000)
6744 (30000)
Nonslip
16-40
lbf (N)
FOOT MOUNTS STEEL

3.94" BASE
30 ARTICULATION
R
Inch
MATERIAL:

1
30

FEATURES:

Lm
L
FLATS
FOR
WRENCH
.787 (20)
3.94 (100)
INCH COMPONENT
Catalog Number
Standard
Nonslip
A40C01-394063X02
A40C01-394063X03
A40C01-394063X04
A40C01-394063X05
A40C01-394063X06
A40C01-394063X07
A40C01-394063X08
A40C01-394075X03
A40C01-394075X04
A40C01-394075X05
A40C01-394075X06
A40C01-394075X07
A40C01-394075X08
A40C01-394075X09
A40C01-394075X10
A40C01-394100X03
A40C01-394100X04
A40C01-394100X05
A40C01-394100X06
A40C01-394100X07
A40C01-394100X08
A40C01-394100X09
A40C01-394100X10
A40C02-394063X02
A40C02-394063X03
A40C02-394063X04
A40C02-394063X05
A40C02-394063X06
A40C02-394063X07
A40C02-394063X08
A40C02-394075X03
A40C02-394075X04
A40C02-394075X05
A40C02-394075X06
A40C02-394075X07
A40C02-394075X08
A40C02-394075X09
A40C02-394075X10
A40C02-394100X03
A40C02-394100X04
A40C02-394100X05
A40C02-394100X06
A40C02-394100X07
A40C02-394100X08
A40C02-394100X09
A40C02-394100X10
Lm
3.662 (93)
4.646 (118)
5.630 (143)
6.614 (168)
7.599 (193)
8.583 (218)
9.567 (243)
4.646 (118)
5.630 (143)
6.614 (168)
7.599 (193)
8.583 (218)
9.567 (243)
10.551 (268)
11.536 (293)
4.685 (119)
5.669 (144)
6.653 (169)
7.638 (199)
8.622 (219)
9.606 (244)
10.590 (269)
11.575 (294)
1.693 (43)
1.693 (43)
1.693 (43)
1.693 (43)
1.693 (43)
1.693 (43)
1.693 (43)
1.693 (43)
1.693 (43)
1.693 (43)
1.693 (43)
1.693 (43)
1.693 (43)
1.693 (43)
1.693 (43)
1.732 (44)
1.732 (44)
1.732 (44)
1.732 (44)
1.732 (44)
1.732 (44)
1.732 (44)
1.732 (44)
1.969 (50)
2.953 (75)
3.937 (100)
4.921 (125)
5.906 (150)
6.890 (175)
7.874 (200)
2.953 (75)
3.937 (100)
4.921 (125)
5.906 (150)
6.890 (175)
7.874 (200)
8.858 (225)
9.843 (250)
2.953 (75)
3.937 (100)
4.921 (125)
5.906 (150)
6.890 (175)
7.874 (200)
8.858 (225)
9.843 (250)
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
3/4-10
3/4-10
3/4-10
3/4-10
3/4-10
3/4-10
3/4-10
3/4-10
1-8
1-8
1-8
1-8
1-8
1-8
1-8
1-8
Wrench Max. Static

Load
Size
lbf (N)
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7868 (35000)
7868 (35000)
7868 (35000)
7868 (35000)
7868 (35000)
7868 (35000)
7868 (35000)
10116 (45000)
10116 (45000)
10116 (45000)
10116 (45000)
10116 (45000)
10116 (45000)
10116 (45000)
10116 (45000)
12364 (55000)
12364 (55000)
12364 (55000)
12364 (55000)
12364 (55000)
12364 (55000)
12364 (55000)
12364 (55000)
16-41
8
9
10
11
12
13
14
15
NEW
I
R
T
FOOT MOUNTS STEEL

4.72" BASE
30 ARTICULATION
Inch
MATERIAL:
1
2
3
4

Screw - Galvanized Steel
Standard:
-40F to +338F (-40C to +170C)
Nonslip:
-13F to +230F (-25C to +110C)
FEATURES:

Lm
L
7
8
9
10
11
12
13
14
15
.906 (23)
4.72 (120)
INCH COMPONENT
Catalog Number
Standard
Nonslip
A40C01-472063X02
A40C01-472063X03
A40C01-472063X04
A40C01-472063X05
A40C01-472063X06
A40C01-472063X07
A40C01-472063X08
A40C01-472075X03
A40C01-472075X04
A40C01-472075X05
A40C01-472075X06
A40C01-472075X07
A40C01-472075X08
A40C01-472075X09
A40C01-472075X10
A40C01-472100X03
A40C01-472100X04
A40C01-472100X05
A40C01-472100X06
A40C01-472100X07
A40C01-472100X08
A40C01-472100X09
A40C01-472100X10
A40C01-472113X04
A40C01-472113X05
A40C01-472113X06
A40C01-472113X07
A40C01-472113X08
A40C01-472113X09
A40C01-472113X10
A40C02-472063X02
A40C02-472063X03
A40C02-472063X04
A40C02-472063X05
A40C02-472063X06
A40C02-472063X07
A40C02-472063X08
A40C02-472075X03
A40C02-472075X04
A40C02-472075X05
A40C02-472075X06
A40C02-472075X07
A40C02-472075X08
A40C02-472075X09
A40C02-472075X10
A40C02-472100X03
A40C02-472100X04
A40C02-472100X05
A40C02-472100X06
A40C02-472100X07
A40C02-472100X08
A40C02-472100X09
A40C02-472100X10
A40C02-472113X04
A40C02-472113X05
A40C02-472113X06
A40C02-472113X07
A40C02-472113X08
A40C02-472113X09
A40C02-472113X10
NEW
FLATS
FOR
WRENCH
5
6
30
16-42
Lm
3.780 (96)
4.764 (121)
5.748 (146)
6.732 (171)
7.717 (196)
8.701 (221)
9.685 (246)
4.764 (121)
5.748 (146)
6.732 (171)
7.717 (196)
8.701 (221)
9.685 (246)
10.669 (271)
11.654 (296)
4.803 (122)
5.787 (147)
6.771 (172)
7.756 (197)
8.740 (222)
9.724 (247)
10.708 (272)
11.693 (297)
5.787 (147)
6.771 (172)
7.756 (197)
8.740 (222)
9.724 (247)
10.708 (272)
11.693 (297)
1.811 (46)
1.811 (46)
1.811 (46)
1.811 (46)
1.811 (46)
1.811 (46)
1.811 (46)
1.811 (46)
1.811 (46)
1.811 (46)
1.811 (46)
1.811 (46)
1.811 (46)
1.811 (46)
1.811 (46)
1.850 (47)
1.850 (47)
1.850 (47)
1.850 (47)
1.850 (47)
1.850 (47)
1.850 (47)
1.850 (47)
1.850 (47)
1.850 (47)
1.850 (47)
1.850 (47)
1.850 (47)
1.850 (47)
1.850 (47)
1.969 (50)
2.953 (75)
3.937 (100)
4.921 (125)
5.906 (150)
6.890 (175)
7.874 (200)
2.953 (75)
3.937 (100)
4.921 (125)
5.906 (150)
6.890 (175)
7.874 (200)
8.858 (225)
9.843 (250)
2.953 (75)
3.937 (100)
4.921 (125)
5.906 (150)
6.890 (175)
7.874 (200)
8.858 (225)
9.843 (250)
3.937 (100)
4.921 (125)
5.906 (150)
6.890 (175)
7.874 (200)
8.858 (225)
9.843 (250)
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
3/4-10
3/4-10
3/4-10
3/4-10
3/4-10
3/4-10
3/4-10
3/4-10
1-8
1-8
1-8
1-8
1-8
1-8
1-8
1-8
1 1/8-7
1 1/8-7
1 1/8-7
1 1/8-7
1 1/8-7
1 1/8-7
1 1/8-7
Wrench Max. Static

Load
Size
lbf (N)
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
1
1
1
1
1
1
1
7868 (35000)
7868 (35000)
7868 (35000)
7868 (35000)
7868 (35000)
7868 (35000)
7868 (35000)
10116 (45000)
10116 (45000)
10116 (45000)
10116 (45000)
10116 (45000)
10116 (45000)
10116 (45000)
10116 (45000)
12364 (55000)
12364 (55000)
12364 (55000)
12364 (55000)
12364 (55000)
12364 (55000)
12364 (55000)
12364 (55000)
14613 (65000)
14613 (65000)
14613 (65000)
14613 (65000)
14613 (65000)
14613 (65000)
14613 (65000)
FOOT MOUNTS STEEL

1.97" BASE
10 ARTICULATION
R
Inch
MATERIAL:
Foot and Screw - 1040 Steel, Galvanized

-40F to +356F (-40C to +180C)
FEATURES:

10
4
5
Lm
L
HEX FOR
WRENCH
SIZE 5/8
6
7
1.142 (29)
.748 (19)
1.97 (50)
INCH COMPONENT
Catalog Number
Lm
Max. Static
Load
A40C03-197038X02
A40C03-197038X04
A40C03-197050X02
A40C03-197050X04
A40C03-197050X06
A40C03-197063X03
A40C03-197063X04
A40C03-197063X06
3.111 (79)
5.079 (129)
3.111 (79)
5.079 (129)
7.048 (179)
4.095 (104)
5.079 (129)
7.048 (179)
1.969 (50)
3.937 (100)
1.969 (50)
3.937 (100)
5.906 (150)
2.953 (75)
3.937 (100)
5.906 (150)
3/8-16
3/8-16
1/2-13
1/2-13
1/2-13
5/8-11
5/8-11
5/8-11
899 (4000)
899 (4000)
899 (4000)
899 (4000)
899 (4000)
899 (4000)
899 (4000)
899 (4000)
lbf (N)
10
11
12
13
14
15
16-43
NEW
I
R
T
FOOT MOUNTS STEEL

3.15" BASE
10 ARTICULATION
Inch
MATERIAL:

2
3
-40F to +356F (-40C to +180C)
FEATURES:

10
WRENCHES:
4
HEX
Lm
L
FLATS OR HEX
FOR WRENCH
(SEE BELOW)
FLAT
8
9
10
.984 (25)
INCH COMPONENT
Catalog Number
Lm
Wrench
Size
Max. Static
Load
A40C03-315038X02
A40C03-315038X04
A40C03-315050X02
A40C03-315050X04
A40C03-315050X06
A40C03-315063X03
A40C03-315063X04
A40C03-315063X06
3.347 (85)
5.315 (135)
3.347 (85)
5.315 (135)
7.284 (185)
4.331 (110)
5.315 (135)
7.284 (185)
1.378 (35)
1.378 (35)
1.378 (35)
1.378 (35)
1.378 (35)
1.378 (35)
1.378 (35)
1.378 (35)
1.969 (50)
3.937 (100)
1.969 (50)
3.937 (100)
5.906 (150)
2.953 (75)
3.937 (100)
5.906 (150)
3/8-16
3/8-16
1/2-13
1/2-13
1/2-13
5/8-11
5/8-11
5/8-11
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
2248 (10000)
2248 (10000)
2248 (10000)
2248 (10000)
2248 (10000)
2248 (10000)
2248 (10000)
2248 (10000)
A40C03-315075X03
A40C03-315075X04
A40C03-315075X06
A40C03-315075X08
A40C03-315100X03
A40C03-315100X04
A40C03-315100X06
A40C03-315100X08
4.370 (111)
5.354 (136)
7.323 (186)
9.291 (236)
4.370 (111)
5.354 (136)
7.323 (186)
9.291 (236)
1.417 (36)
1.417 (36)
1.417 (36)
1.417 (36)
1.417 (36)
1.417 (36)
1.417 (36)
1.417 (36)
2.953 (75)
3.937 (100)
5.906 (150)
7.874 (200)
2.953 (75)
3.937 (100)
5.906 (150)
7.874 (200)
3/4-10
3/4-10
3/4-10
3/4-10
1-8
1-8
1-8
1-8
5/8
5/8
5/8
5/8
7/8
7/8
7/8
7/8
2248 (10000)
2248 (10000)
2248 (10000)
2248 (10000)
2248 (10000)
2248 (10000)
2248 (10000)
2248 (10000)
Hex
11
12
Flat
13
14
15
NEW
3.15 (80)
16-44
lbf (N)
FOOT MOUNTS STEEL

3.94" BASE
10 ARTICULATION
R
Inch
MATERIAL:

-40F to +356F (-40C to +180C)
FEATURES:

10
WRENCHES:
4
HEX
Lm
L
FLATS OR HEX
FOR WRENCH
(SEE BELOW)
FLAT
1.102 (28)
3.94 (100)
INCH COMPONENT
Catalog Number
Lm
Wrench
Size
Max. Static
Load
lbf (N)
10
A40C03-394063X03
A40C03-394063X04
A40C03-394063X06
A40C03-394063X08
4.429 (112.5)
5.413 (137.5)
7.382 (187.5)
9.350 (237.5)
1.476 (37.5)
1.476 (37.5)
1.476 (37.5)
1.476 (37.5)
2.953 (75)
3.937 (100)
5.906 (150)
7.874 (200)
5/8-11
5/8-11
5/8-11
5/8-11
5/8
5/8
5/8
5/8
3372 (15000)
3372 (15000)
3372 (15000)
3372 (15000)
11
A40C03-394075X03
A40C03-394075X04
A40C03-394075X06
A40C03-394075X08
A40C03-394075X10
A40C03-394100X03
A40C03-394100X06
A40C03-394100X08
A40C03-394100X10
A40C03-394113X03
A40C03-394113X06
A40C03-394113X08
A40C03-394113X10
4.469 (113.5)
5.453 (138.5)
7.422 (188.5)
9.390 (238.5)
11.359 (288.5)
4.469 (113.5)
7.422 (188.5)
9.390 (238.5)
11.359 (288.5)
4.508 (114.5)
7.461 (189.5)
9.429 (239.5)
11.398 (289.5)
1.516 (38.5)
1.516 (38.5)
1.516 (38.5)
1.516 (38.5)
1.516 (38.5)
1.516 (38.5)
1.516 (38.5)
1.516 (38.5)
1.516 (38.5)
1.555 (39.5)
1.555 (39.5)
1.555 (39.5)
1.555 (39.5)
2.953 (75)
3.937 (100)
5.906 (150)
7.874 (200)
9.843 (250)
3.937 (100)
5.906 (150)
7.874 (200)
9.843 (250)
3.937 (100)
5.906 (150)
7.874 (200)
9.843 (250)
3/4-10
3/4-10
3/4-10
3/4-10
3/4-10
1-8
1-8
1-8
1-8
1 1/8-7
1 1/8-7
1 1/8-7
1 1/8-7
5/8
5/8
5/8
5/8
5/8
7/8
7/8
7/8
7/8
1
1
1
1
3372 (15000)
3372 (15000)
3372 (15000)
3372 (15000)
3372 (15000)
3372 (15000)
3372 (15000)
3372 (15000)
3372 (15000)
3372 (15000)
3372 (15000)
3372 (15000)
3372 (15000)
12
16-45
NEW
Hex
Flat
13
14
15
I
R
T
FOOT MOUNTS STEEL

4.72" BASE
10 ARTICULATION
Inch
MATERIAL:

2
3
-40F to +356F (-40C to +180C)
FEATURES:

10
WRENCHES:
4
HEX
Lm
L
FLATS OR HEX
FOR WRENCH
(SEE BELOW)
FLAT
8
9
10
1.260 (32)
INCH COMPONENT
Catalog Number
Lm
Wrench
Size
Max. Static
Load
A40C03-472063X03
A40C03-472063X04
A40C03-472063X06
A40C03-472063X08
4.587 (116.5)
5.571 (141.5)
7.540 (191.5)
9.508 (241.5)
1.634 (41.5)
1.634 (41.5)
1.634 (41.5)
1.634 (41.5)
2.953 (75)
3.937 (100)
5.906 (150)
7.874 (200)
5/8-11
5/8-11
5/8-11
5/8-11
5/8
5/8
5/8
5/8
6744 (30000)
6744 (30000)
6744 (30000)
6744 (30000)
A40C03-472075X03
A40C03-472075X04
A40C03-472075X06
A40C03-472075X08
A40C03-472075X10
A40C03-472100X04
A40C03-472100X06
A40C03-472100X08
A40C03-472100X10
A40C03-472113X04
A40C03-472113X06
A40C03-472113X08
A40C03-472113X10
4.626 (117.5)
5.610 (142.5)
7.579 (192.5)
9.547 (242.5)
11.516 (292.5)
5.610 (142.5)
7.579 (192.5)
9.547 (242.5)
11.516 (292.5)
5.650 (143.5)
7.619 (193.5)
9.587 (243.5)
11.556 (293.5)
1.673 (42.5)
1.673 (42.5)
1.673 (42.5)
1.673 (42.5)
1.673 (42.5)
1.673 (42.5)
1.673 (42.5)
1.673 (42.5)
1.673 (42.5)
1.713 (43.5)
1.713 (43.5)
1.713 (43.5)
1.713 (43.5)
2.953 (75)
3.937 (100)
5.906 (150)
7.874 (200)
9.843 (250)
3.937 (100)
5.906 (150)
7.874 (200)
9.843 (250)
3.937 (100)
5.906 (150)
7.874 (200)
9.843 (250)
3/4-10
3/4-10
3/4-10
3/4-10
3/4-10
1-8
1-8
1-8
1-8
1 1/8-7
1 1/8-7
1 1/8-7
1 1/8-7
5/8
5/8
5/8
5/8
5/8
7/8
7/8
7/8
7/8
1
1
1
1
6744 (30000)
6744 (30000)
6744 (30000)
6744 (30000)
6744 (30000)
6744 (30000)
6744 (30000)
6744 (30000)
6744 (30000)
6744 (30000)
6744 (30000)
6744 (30000)
6744 (30000)
Hex
11
Flat
12
13
14
15
NEW
4.72 (120)
16-46
lbf (N)
FOOT MOUNTS STEEL

3.15" BASE
10 ARTICULATION
R
Inch
MATERIAL:

-40F to +356F (-40C to +180C)
FEATURES:

Mounting Tab.
10
WRENCHES:
3
4
HEX
Lm
L
FLATS OR HEX
FOR WRENCH
(SEE BELOW)
FLAT
A
.59 (15)
3.15 (80)
.984 (25)
2.12 (54)
INCH COMPONENT
Max. Static
Load
Catalog Number
Lm
Wrench
Size
A40C04-315038X02
A40C04-315038X04
A40C04-315050X02
A40C04-315050X04
A40C04-315050X06
A40C04-315063X02
A40C04-315063X04
A40C04-315063X06
3.347 (85)
5.315 (135)
3.347 (85)
5.315 (135)
7.284 (185)
3.347 (85)
5.315 (135)
7.284 (185)
1.378 (35)
1.378 (35)
1.378 (35)
1.378 (35)
1.378 (35)
1.378 (35)
1.378 (35)
1.378 (35)
1.969 (50)
3.937 (100)
1.969 (50)
3.937 (100)
5.906 (150)
1.969 (50)
3.937 (100)
5.906 (150)
3/8-16
3/8-16
1/2-13
1/2-13
1/2-13
5/8-11
5/8-11
5/8-11
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
2248 (10000)
2248 (10000)
2248 (10000)
2248 (10000)
2248 (10000)
2248 (10000)
2248 (10000)
2248 (10000)
A40C04-315075X03
A40C04-315075X04
A40C04-315075X06
A40C04-315075X08
A40C04-315100X03
A40C04-315100X04
A40C04-315100X06
A40C04-315100X08
4.370 (111)
5.354 (136)
7.323 (186)
9.291 (236)
4.370 (111)
5.354 (136)
7.323 (186)
9.291 (236)
1.417 (36)
1.417 (36)
1.417 (36)
1.417 (36)
1.417 (36)
1.417 (36)
1.417 (36)
1.417 (36)
2.953 (75)
3.937 (100)
5.906 (150)
7.874 (200)
2.953 (75)
3.937 (100)
5.906 (150)
7.874 (200)
3/4-10
3/4-10
3/4-10
3/4-10
1-8
1-8
1-8
1-8
5/8
5/8
5/8
5/8
7/8
7/8
7/8
7/8
2248 (10000)
2248 (10000)
2248 (10000)
2248 (10000)
2248 (10000)
2248 (10000)
2248 (10000)
2248 (10000)
13
16-47
NEW
Hex
Flat
lbf (N)
10
11
12
14
15
I
R
T
FOOT MOUNTS STEEL

3.94" BASE
10 ARTICULATION
Inch
MATERIAL:

2
3
-40F to +356F (-40C to +180C)
FEATURES:

Mounting Tab.
10
M
WRENCHES:
4
5
HEX
Lm
L
FLATS OR HEX
FOR WRENCH
(SEE BELOW)
FLAT
.59 (15)
1.102 (28)
3.94 (100)
2.72 (69)
9
10
INCH COMPONENT
L
Lm
Wrench
Size
A40C04-394063X03
A40C04-394063X04
A40C04-394063X06
A40C04-394063X08
4.429 (112.5)
5.413 (137.5)
7.382 (187.5)
9.350 (237.5)
1.476 (37.5)
1.476 (37.5)
1.476 (37.5)
1.476 (37.5)
2.953 (75)
3.937 (100)
5.906 (150)
7.874 (200)
5/8-11
5/8-11
5/8-11
5/8-11
5/8
5/8
5/8
5/8
3372 (15000)
3372 (15000)
3372 (15000)
3372 (15000)
A40C04-394075X03
A40C04-394075X04
A40C04-394075X06
A40C04-394075X08
A40C04-394075X10
A40C04-394100X04
A40C04-394100X06
A40C04-394100X08
A40C04-394100X10
A40C04-394113X04
A40C04-394113X06
A40C04-394113X08
A40C04-394113X10
4.469 (113.5)
5.453 (138.5)
7.422 (188.5)
9.390 (238.5)
11.359 (288.5)
5.453 (138.5)
7.422 (188.5)
9.390 (238.5)
11.359 (288.5)
5.492 (139.5)
7.461 (189.5)
9.429 (239.5)
11.398 (289.5)
1.516 (38.5)
1.516 (38.5)
1.516 (38.5)
1.516 (38.5)
1.516 (38.5)
1.516 (38.5)
1.516 (38.5)
1.516 (38.5)
1.516 (38.5)
1.555 (39.5)
1.555 (39.5)
1.555 (39.5)
1.555 (39.5)
2.953 (75)
3.937 (100)
5.906 (150)
7.874 (200)
9.843 (250)
3.937 (100)
5.906 (150)
7.874 (200)
9.843 (250)
3.937 (100)
5.906 (150)
7.874 (200)
9.843 (250)
3/4-10
3/4-10
3/4-10
3/4-10
3/4-10
1-8
1-8
1-8
1-8
1 1/8-7
1 1/8-7
1 1/8-7
1 1/8-7
5/8
5/8
5/8
5/8
5/8
7/8
7/8
7/8
7/8
1
1
1
1
3372 (15000)
3372 (15000)
3372 (15000)
3372 (15000)
3372 (15000)
3372 (15000)
3372 (15000)
3372 (15000)
3372 (15000)
3372 (15000)
3372 (15000)
3372 (15000)
3372 (15000)
Hex
11
Flat
12
13
14
15
NEW
Max. Static
Load
Catalog Number
16-48
lbf (N)
FOOT MOUNTS STEEL

STAMPED BASE
4.88" BASE
8 ARTICULATION
R
Inch
MATERIAL:
T
1
-40F to +356F (-40C to +180C)
FEATURES:
4 Mounting Holes.
4
5
Lm
L
6
FLATS FOR WRENCH
(4X) .49 (12.5)
7
8
3.86 (98)
4.88 (124)
.157 (4)
.807 (20.5)
INCH COMPONENT
Catalog Number
Lm
Wrench
Size
A40C09-488063X04
A40C09-488063X06
A40C09-488063X07
A40C09-488075X04
A40C09-488075X06
A40C09-488075X07
A40C09-488075X08
A40C09-488100X04
A40C09-488100X06
A40C09-488100X08
A40C09-488113X06
A40C09-488113X08
A40C09-488113X10
5.276 (134)
7.244 (184)
8.228 (209)
5.276 (134)
7.244 (184)
8.228 (209)
9.213 (234)
5.276 (134)
7.244 (184)
9.213 (234)
7.283 (185)
9.252 (235)
11.220 (285)
3.937 (100)
5.906 (150)
6.890 (175)
3.937 (100)
5.906 (150)
6.890 (175)
7.874 (200)
3.937 (100)
5.906 (150)
7.874 (200)
5.906 (150)
7.874 (200)
9.843 (250)
5/8-11
5/8-11
5/8-11
3/4-10
3/4-10
3/4-10
3/4-10
1-8
1-8
1-8
1 1/8-7
1 1/8-7
1 1/8-7
5/8
5/8
5/8
5/8
5/8
5/8
5/8
7/8
7/8
7/8
1
1
1
Max. Static
Load
lbf (N)
4496 (20000)
4496 (20000)
4496 (20000)
5620 (25000)
5620 (25000)
5620 (25000)
5620 (25000)
6744 (30000)
6744 (30000)
6744 (30000)
7868 (35000)
7868 (35000)
7868 (35000)
10
11
12
13
14
15
16-49
NEW
I
R
T
1
2
FOOT MOUNTS STEEL

STAMPED BASE
4.88 BASE
8 ARTICULATION
Inch
MATERIAL:
Foot - 1040 Steel, Black Cataphoresis

-40F to +356F (-40C to +180C)
FEATURES:
4 Mounting Holes.
M
8
4
5
Lm
FLATS FOR WRENCH

(4X) .49 (12.5)
8
9
10
11
12
13
14
15
NEW
3.86 (98)
4.88 (124)
.157 (4)
.807 (20.5)
INCH COMPONENT
Catalog Number
Lm
Wrench
Size
Max. Static
Load
A40Z09-488063X04
A40Z09-488063X06
A40Z09-488063X07
A40Z09-488075X04
A40Z09-488075X06
A40Z09-488075X07
A40Z09-488075X08
A40Z09-488100X04
A40Z09-488100X06
A40Z09-488100X08
A40Z09-488113X06
A40Z09-488113X08
A40Z09-488113X10
5.276 (134)
7.244 (184)
8.228 (209)
5.276 (134)
7.244 (184)
8.228 (209)
9.213 (234)
5.276 (134)
7.244 (184)
9.213 (234)
7.283 (185)
9.252 (235)
11.220 (285)
3.937 (100)
5.906 (150)
6.890 (175)
3.937 (100)
5.906 (150)
6.890 (175)
7.874 (200)
3.937 (100)
5.906 (150)
7.874 (200)
5.906 (150)
7.874 (200)
9.843 (250)
5/8-11
5/8-11
5/8-11
3/4-10
3/4-10
3/4-10
3/4-10
1-8
1-8
1-8
1 1/8-7
1 1/8-7
1 1/8-7
5/8
5/8
5/8
5/8
5/8
5/8
5/8
7/8
7/8
7/8
1
1
1
4496 (20000)
4496 (20000)
4496 (20000)
5620 (25000)
5620 (25000)
5620 (25000)
5620 (25000)
6744 (30000)
6744 (30000)
6744 (30000)
7868 (35000)
7868 (35000)
7868 (35000)
16-50
lbf (N)
FOOT MOUNTS STEEL

STAMPED BASE
4.88" BASE
8 ARTICULATION
R
Inch
MATERIAL:
T
1

-13F to +230F (-25C to +110C)
FEATURES:
80 Shore Vulcanized NBR Rubber.

4 Mounting Holes.
M
8
WRENCHES:
4
5
HEX
Lm
FLATS OR HEX
FOR WRENCH
(SEE BELOW)
(4X) .49 (12.5)
FLAT
.315 (8)
7
8
3.86 (98)
4.88 (124)
.925 (23.5)
9
10
INCH COMPONENT
Catalog Number
Lm
Wrench
Size
Max. Static
Load
A40C10-488063X04
A40C10-488063X06
A40C10-488063X07
5.197 (132)
7.165 (182)
8.150 (207)
3.937 (100)
5.906 (150)
6.890 (175)
5/8-11
5/8-11
5/8-11
5/8
5/8
5/8
4496 (20000)
4496 (20000)
4496 (20000)
A40C10-488075X04
A40C10-488075X06
A40C10-488075X07
A40C10-488075X08
A40C10-488100X04
A40C10-488100X06
A40C10-488100X08
A40C10-488113X06
A40C10-488113X08
A40C10-488113X10
5.197 (132)
7.165 (182)
8.150 (207)
9.134 (232)
5.197 (132)
7.165 (182)
9.134 (232)
7.205 (183)
9.173 (233)
11.142 (283)
3.937 (100)
5.906 (150)
6.890 (175)
7.874 (200)
3.937 (100)
5.906 (150)
7.874 (200)
5.906 (150)
7.874 (200)
9.843 (250)
3/4-10
3/4-10
3/4-10
3/4-10
1-8
1-8
1-8
1 1/8-7
1 1/8-7
1 1/8-7
5/8
5/8
5/8
5/8
7/8
7/8
7/8
1
1
1
4496 (20000)
4496 (20000)
4496 (20000)
4496 (20000)
4496 (20000)
4496 (20000)
4496 (20000)
4496 (20000)
4496 (20000)
4496 (20000)
Hex
Flat
lbf (N)
16-51
11
12
13
14
15
NEW
I
R
T
1

STAMPED BASE
3.35" BASE
8 ARTICULATION
Inch
MATERIAL:
2
3
-94F to +248F (-70C to +120C)
FEATURES:
2 Mounting Holes.
M
8
4
5
6
Lm
L
FLATS FOR WRENCH

(2X) .41 (10.5)
8
9
.118 (3)
.512 (13)
2.56 (65)
3.35 (85)
10
INCH COMPONENT
11
12
13
Catalog Number
Lm
Wrench
Size
Max. Static
Load
A40X09-335063X04
A40X09-335063X06
A40X09-335063X07
A40X09-335075X04
A40X09-335075X06
A40X09-335075X07
4.764 (121)
6.732 (171)
7.717 (196)
5.354 (136)
7.087 (180)
9.331 (237)
3.937 (100)
5.906 (150)
6.890 (175)
3.937 (100)
5.906 (150)
6.890 (175)
5/8-11
5/8-11
5/8-11
3/4-10
3/4-10
3/4-10
1/2
1/2
1/2
5/8
5/8
5/8
2698 (12000)
2698 (12000)
2698 (12000)
2698 (12000)
2698 (12000)
2698 (12000)
14
15
NEW
16-52
lbf (N)

STAMPED BASE
3.35" BASE
8 ARTICULATION
R
Inch
MATERIAL:
T
1

-13F to +230F (-25C to +110C)
FEATURES:

2 Mounting Holes.
3
M
5
Lm
7
FLATS FOR WRENCH
(2X) .41 (10.5)
2.56 (65)
3.35 (85)
.276 (7)
.630 (16)
10
INCH COMPONENT
Catalog Number
Lm
Wrench
Size
Max. Static
Load
A40X10-335063X04
A40X10-335063X06
A40X10-335063X07
A40X10-335075X04
A40X10-335075X06
A40X10-335075X08
5.118 (130)
7.087 (180)
8.071 (205)
5.118 (130)
7.087 (180)
9.055 (230)
3.937 (100)
5.906 (150)
6.890 (175)
3.937 (100)
5.906 (150)
7.874 (200)
5/8-11
5/8-11
5/8-11
3/4-10
3/4-10
3/4-10
1/2
1/2
1/2
5/8
5/8
5/8
2698 (12000)
2698 (12000)
2698 (12000)
2698 (12000)
2698 (12000)
2698 (12000)
11
lbf (N)
12
13
14
15
16-53
NEW
I
R
T
1

STAMPED BASE
4.84" BASE
8 ARTICULATION
Inch
MATERIAL:
2
3
-94F to +248F (-70C to +120C)
FEATURES:
4 Mounting Holes.
M
8
5
6
7
Lm
L
FLATS FOR WRENCH

(4X) .49 (12.5)
.118 (3)
.807 (20.5)
3.86 (98)
4.84 (123)
10
11
12
13
14
15
NEW
INCH COMPONENT
Catalog Number
Lm
Wrench
Size
Max. Static
Load
A40X09-484063X04
A40X09-484063X06
A40X09-484063X07
A40X09-484075X04
A40X09-484075X06
A40X09-484075X08
A40X09-484100X04
A40X09-484100X06
A40X09-484100X08
A40X09-484113X06
A40X09-484113X08
A40X09-484113X10
5.276 (134)
7.244 (184)
8.228 (209)
5.276 (134)
7.244 (184)
9.213 (234)
5.276 (134)
7.244 (184)
9.213 (234)
7.283 (185)
9.252 (235)
11.220 (285)
3.937 (100)
5.906 (150)
6.890 (175)
3.937 (100)
5.906 (150)
7.874 (200)
3.937 (100)
5.906 (150)
7.874 (200)
5.906 (150)
7.874 (200)
9.843 (250)
5/8-11
5/8-11
5/8-11
3/4-10
3/4-10
3/4-10
1-8
1-8
1-8
1 1/8-7
1 1/8-7
1 1/8-7
5/8
5/8
5/8
5/8
5/8
5/8
7/8
7/8
7/8
1
1
1
4496 (20000)
4496 (20000)
4496 (20000)
5620 (25000)
5620 (25000)
5620 (25000)
6744 (30000)
6744 (30000)
6744 (30000)
7868 (35000)
7868 (35000)
7868 (35000)
16-54
lbf (N)

STAMPED BASE
4.84" BASE
8 ARTICULATION
R
Inch
MATERIAL:
T
1

-13F to +230F (-25C to +110C)
FEATURES:

4 Mounting Holes.
3
4
M
8
5
6
Lm
L
7
8
FLATS FOR WRENCH

(4X) .49 (12.5)
.276 (7)
.925 (23.5)
3.86 (98)
4.84 (123)
10
INCH COMPONENT
Catalog Number
Lm
Wrench
Size
Max. Static
Load
A40X10-484063X04
A40X10-484063X06
A40X10-484063X07
A40X10-484075X04
A40X10-484075X06
A40X10-484075X08
A40X10-484100X04
A40X10-484100X06
A40X10-484100X08
A40X10-484113X06
A40X10-484113X08
A40X10-484113X10
5.394 (137)
7.362 (187)
8.346 (212)
5.394 (137)
7.362 (187)
9.331 (237)
5.433 (138)
7.402 (188)
9.370 (238)
7.402 (188)
9.370 (238)
11.299 (287)
3.937 (100)
5.906 (150)
6.890 (175)
3.937 (100)
5.906 (150)
7.874 (200)
3.937 (100)
5.906 (150)
7.874 (200)
5.906 (150)
7.874 (200)
9.843 (250)
5/8-11
5/8-11
5/8-11
3/4-10
3/4-10
3/4-10
1-8
1-8
1-8
1 1/8-7
1 1/8-7
1 1/8-7
5/8
5/8
5/8
5/8
5/8
5/8
7/8
7/8
7/8
1
1
1
4496 (20000)
4496 (20000)
4496 (20000)
4496 (20000)
4496 (20000)
4496 (20000)
4496 (20000)
4496 (20000)
4496 (20000)
4496 (20000)
4496 (20000)
4496 (20000)
lbf (N)
16-55
11
12
13
14
15
NEW
HEXAGONAL NUTS
MATERIAL:
Carbon Steel or 18-8 Stainless Steel
FINISH:
Inch
SPECIFICATION:
Priced Per Piece
1
2
3
5
6
7
8
9
10
INCH COMPONENT
Catalog Number
Steel
Stainless Steel
A 9Q12-01140
A 9Q12-01432
A 9Q12-01632
A 9Q12-01932
A 9Q12-02520
A 9Q12-03118
A 9Q12-03124
A 9Q12-03816
A 9Q12-03824
A 9Q12-05013
A 9Q12-05020
A 9Q12-06311
A 9Q12-07510
A 9Q12-10008
A 9Q12-11307
A 9Q12-12507
A 9X12-01140
A 9X12-01432
A 9X12-01632
A 9X12-01932
A 9X12-02520
A 9X12-03118
A 9X12-03124
A 9X12-03816
A 9X12-03824
A 9X12-05013
A 9X12-05020
A 9X12-06311
A 9X12-07510
A 9X12-10008
A 9X12-11307
A 9X12-12507
11
12
13
14
15
NEW
16-56
Thread
Size
A
Tol.
B
Tol.
H
Tol.
#4-40
#6-32
#8-32
#10-32
1/4-20
5/16-18
5/16-24
3/8-16
3/8-24
1/2-13
1/2-20
5/8-11
3/4-10
1-8
1 1/8-7
1 1/4-7
.250
.312
.344
.375
.438
.500
.500
.562
.562
.750
.750
.938
1.125
1.500
1.688
1.875
+.000/-.009
+.000/-.010
+.000/-.012
+.000/-.013
+.000/-.010
+.000/-.011
+.000/-.011
+.000/-.011
+.000/-.011
+.000/-.014
+.000/-.014
+.000/-.016
+.000/-.037
+.000/-.050
+.000/-.057
+.000/-.063
.289
.361
.397
.433
.505
.577
.577
.650
.650
.866
.866
1.083
1.299
1.732
1.949
2.165
+.000/-.014
+.000/-.017
+.000/-.019
+.000/-.020
+.000/-.017
+.000/-.020
+.000/-.020
+.000/-.022
+.000/-.022
+.000/-.026
+.000/-.026
+.000/-.032
+.000/-.059
+.000/-.079
+.000/-.090
+.000/-.099
.093
.114
.130
.130
.219
.266
.266
.328
.328
.437
.437
.547
.641
.859
.969
1.062
.006
.006
.007
.007
.007
.008
.008
.009
.009
.011
.011
.012
.024
.028
.030
.032
FLAT WASHERS
MATERIAL:
FINISH:
Inch
SPECIFICATION:
Priced Per Piece
1
T
I.D.
O.D.
3
4
INCH COMPONENT
Catalog Number
5
Thread
Size
I.D.
I.D.
Tolerance
O.D.
O.D.
Tolerance
T
Tolerance
#4
#6
#8
#10
1/4
5/16
3/8
1/2
5/8
3/4
1-8
1 1/8
1 1/4
.126
.157
.189
.220
.286
.349
.411
.536
.667
.823
1.073
1.261
1.386
.007
.007
.007
.007
.010
.010
.010
.010
.019
.019
.019
.019
.019
.313
.380
.443
.505
.630
.692
.816
1.073
1.323
1.480
2.011
2.261
2.511
.007
.010
.010
.010
.010
.011
.011
.019
.019
.019
.019
.019
.019
.032
.050
.050
.050
.065
.065
.065
.097
.097
.134
.134
.134
.164
.008
.015
.015
.015
.015
.015
.015
.024
.024
.026
.026
.026
.028
#4
#6
#8
#10
1/4
5/16
3/8
1/2
5/8
3/4
1
1 1/8
1 1/4
.126
.157
.174
.220
.281
.375
.406
.531
.656
.812
1.062
1.186
1.312
.007
.011
.010
.007
.005
.005
.005
.005
.005
.005
.005
.009
.005
.313
.382
.444
.505
.625
.875
.812
1.062
1.312
1.500
2.000
2.500
2.750
.007
.013
.013
.010
.005
.005
.005
.005
.005
.005
.005
.005
.005
.032
.032
.032
.040
.065
.084
.065
.097
.097
.134
.115
.115
.115
.010
.010
.010
.007
.015
.020
.015
.024
.024
.026
.008
.008
.008
Steel
A 9Q14-011
A 9Q14-014
A 9Q14-016
A 9Q14-019
A 9Q14-025
A 9Q14-031
A 9Q14-038
A 9Q14-050
A 9Q14-063
A 9Q14-075
A 9Q14-100
A 9Q14-113
A 9Q14-125
Stainless Steel
A 9X14-011
A 9X14-014
A 9X14-016
A 9X14-019
A 9X14-025
A 9X14-031
A 9X14-038
A 9X14-050
A 9X14-063
A 9X14-075
A 9X14-100
A 9X14-113
A 9X14-125
6
7
8
9
10
11
12
13
14
15
16-57
NEW
SPLIT LOCK WASHERS

MATERIAL:
FINISH:
Inch
SPECIFICATION:
Priced Per Piece
1
2
O.D.
I.D.
4
5
INCH COMPONENT
Catalog Number
6
7
8
9
Steel
Stainless Steel
A 9Q13-011
A 9Q13-014
A 9Q13-016
A 9Q13-019
A 9Q13-025
A 9Q13-031
A 9Q13-038
A 9Q13-050
A 9Q13-063
A 9Q13-075
A 9Q13-100
A 9Q13-113
A 9Q13-125
A 9X13-011
A 9X13-014
A 9X13-016
A 9X13-019
A 9X13-025
A 9X13-031
A 9X13-038
A 9X13-050
A 9X13-063
A 9X13-075
A 9X13-100
A 9X13-113
A 9X13-125
10
11
12
13
14
15
NEW
16-58
Thread
Size
I.D.
I.D.
Tolerance
O.D.
Max.
T
Min.
#4
#6
#8
#10
1/4
5/16
3/8
1/2
5/8
3/4
1
1-1/8
1-1/4
.120
.148
.174
.200
.260
.322
.385
.512
.641
.766
1.024
1.153
1.280
+.000/-.006
+.000/-.007
+.000/-.007
+.000/-.007
+.000/-.008
+.000/-.008
+.000/-.008
+.000/-.010
+.000/-.013
+.000/-.013
+.000/-.021
+.000/-.024
+.000/-.026
.209
.250
.293
.334
.487
.583
.680
.869
1.073
1.265
1.656
1.847
2.036
.025
.031
.040
.047
.062
.078
.094
.125
.156
.188
.250
.281
.312
ALPHABETICAL INDEX
A
ADAPTER BUSHINGS
"V" Guide.................................................................9-9
ANTI-BACKLASH GEAR SPRINGS......................10-93
ANTI-BACKLASH GEARS

See Spur Gears Precision, Anti-Backlash
APPLICATION EXAMPLES
Clutches..............................................................13-34
Hysterisis Brakes and Clutches.....................13-22
In-line Slip Clutches...........................................13-4
Magnetic Clutches and Couplings.................13-10
ARBOR SHIMS.......................................................10-49
with Keyway......................................................10-48
ARBOR SPACERS...................................................10-49
with Keyway......................................................10-48
BALL BEARINGS
Extended Inner Ring, ABEC 3

Flanged............................................................5-12
Plain.................................................................5-11
External Tolerance Rings...................................4-28
Internal Tolerance Rings....................................4-26
Linear
Adjustable Type, with Wipers......................5-18
Closed Type.....................................................5-14
with Wipers................................................5-16
Open Type.......................................................5-15
with Wipers................................................5-17
Pillow Blocks, Miniature....................................5-99
Plastic Race
Glass and Stainless Steel Balls...................5-13
Precision
ABEC 3
Flanged.......................................................5-10
Plain..............................................................5-9
ABEC 5 and 7
Flanged.........................................................5-7
Plain..............................................................5-6
Ultraprecision and Precision..............................5-8
BALL SPLINES
Telescoping, Miniature......................................4-22
BALLS
Nylon, Chrome Steel and Stainless Steel.....5-115
BAR STOCK
Oil-Impregnated Sintered Bronze
Cored ...............................................................5-48
Solid.................................................................5-47
BASE MOUNTINGS
Compression
Stainless Steel Mesh, to 1000 lbf................8-56
Diamond Shape
Durulene and Neoprene Isolators,
to 120 lbf..........................................................8-80
Endur-C Elastomer Isolator
to 75 lbf............................................................8-52
to 200 lbf..........................................................8-53
BASE MOUNTINGS (CONTINUED)

Heavy-Duty
Stainless Steel Mesh
to 1598 lbf...................................................8-57
to 20000 lbf.................................................8-58
Leveling
Neoprene Isolator, to 12000 lbf....................8-86
Stainless Steel Mesh, to 10000 lbf..............8-84
Rectangular
Durulene and Neoprene, Steel Base,
to 4000 lbf........................................................8-78.
Stainless Steel Spring and Mesh
to 10 lbf............................................................8-51
to 242 lbf..........................................................8-54
BASE MOUNTS LOAD DEFLECTION DATA
Durulene and Neoprene..................................8-79
BEARING HANGERS..............................................5-112
BEARING HOUSINGS
Commercial
Flanged..........................................................5-113
Pillow Block..................................................5-114
Precision
Plain...............................................................5-111
BEARING MOUNTING PLATES............................5-112
BEARING RETAINERS...........................................10-62
BEARINGS, BALL, See Ball Bearings
BEARINGS
Linear, J Polymer
Closed Type
Aluminum Housing....................................5-27
Plastic Housing.........................................5-29
Open Type
Aluminum Housing....................................5-28
Needle Bearing Inner Races............................5-81
Needle Roller Bearings......................................5-80
Needle Roller Clutches
Self-Clinching Pressbearings......................5-88
Standard..........................................................5-87
with Bearing Support....................................5-90
Needle Roller Pressbearings
Flange-Mounted, Nonaligning.....................5-86
Flange-Mounted, Self-Aligning...................5-85
Press-Fit Type.................................................5-84
Self-Clinching Type, Self-Aligning
and Nonaligning.............................................5-82
PILLOW BLOCK, See Pillow Blocks
Rod Ends, L280 Polymer Ball,
Thermoplastic Body
Female...........................................................5-109
Male...............................................................5-108
Sintered Bronze
"B" Series, Plain and Flanged.......................5-33
"F" Series, Standard, Flanged......................5-37
"G" Series, Thick Walled,
Plain and Flanged..........................................5-34
A-1
R
T
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
A
ALPHABETICAL INDEX
R
T
1
2
3
4
5
6
7
8
9
10
11
12
13
14
BEARINGS (CONTINUED)
Sintered Bronze (Continued)
"L" Series, Long
Plain............................................................5-33
"P" Series, Standard
Plain............................................................5-35
"S" Series
Flanged.......................................................5-44
Plain............................................................5-38
Ultraprecision
Flanged.......................................................5-32
Plain............................................................5-31
SLEEVE, See Sleeve Bearings
Thrust
Banded Assembly..........................................5-91
Stainless Steel Balls, Nylon Retainer.........5-92
Steel Balls, Nylon Retainer..........................5-93
Washdown
FDA Compliant..............................................5-104
BELLOWS COUPLINGS
Clamp Type Hub
Precision
Stainless Steel Bellows................................6-22
Combination Hub Type
Precision, Bronze Bellows...........................6-20
High Torque
Polished Brass...............................................6-21
Modular
Size 0................................................................6-13
Size 1................................................................6-14
Size 2................................................................6-15
Size 3................................................................6-16
Set Screw Type Hub
Heavy-Duty
Phosphor Bronze, Tin Plated.....................6-7
Precision
Stainless Steel................................................6-23
Technical Data, Hi-Flex
Integral Clamp Type....................................6-8
Set Screw Type and Clamp Type............6-10
Zero Backlash
Fairloc Hub, Phosphor Bronze,
Tin Plated...........................................................6-6
Integral Clamp Type, Hi-Flex,
Nickel Bellows.................................................6-9
15
A
A-2
BELT STOCK, TIMING

GT2, Neoprene
.079"/2 mm Pitch...............................................2-8
.118"/3 mm Pitch...............................................2-8
.197"/5 mm Pitch...............................................2-8
HTD, Neoprene
.118"/3 mm Pitch...............................................2-7
.197"/5 mm Pitch...............................................2-7
L, Neoprene or Polyurethane
3/8"/9.53 mm Pitch............................................2-6
MXL, Neoprene
.080"/2.03 mm Pitch..........................................2-6
T, Polyurethane
.197"/5 mm Pitch...............................................2-7
.394"/10 mm Pitch.............................................2-7
XL, Neoprene
1/5"/5.08 mm Pitch............................................2-6
BELT TENSION TESTER AND
TESTER ACCESSORIES...........................................2-14
BELTS
Flat.......................................................................2-266
O-Ring, Neoprene
1/16", 3/32" and 1/8" Diameter.....................2-257
3/16" and 1/4" Diameter................................2-258
Posi-Drives, Single Core, Polyurethane
20 Pitch..........................................................2-211
32 Pitch..........................................................2-204
Posi-Drives, Twin Core, Polyurethane
.1475" C.P........................................................2-208
20 Pitch..........................................................2-214
Rounthane
Connectors, Aluminum................................2-259
3/16", 1/4" and 5/16" Diameter.....................2-259
Timing
40 D.P., .082"/2.07 mm Pitch
Polyurethane, Kevlar Cord......................2-37
Polyurethane, Polyester Cord.................2-35
GT2
.079"/2 mm Pitch
Neoprene............................................2-162
Polymer Compound...........................2-161
.118"/3 mm Pitch
Neoprene, Double-Sided..................2-178
Neoprene............................................2-176
.197"/5 mm Pitch
Neoprene............................................2-193
HTD
.118"/3 mm Pitch
Neoprene............................................2-112
.197"/5 mm Pitch
Neoprene............................................2-134
ALPHABETICAL INDEX
BELTS (CONTINUED)
Timing (Continued)
L
3/8"/9.53 mm Pitch
Neoprene............................................2-100
Polymer Compound.............................2-99
MXL
.080"/2.03 mm Pitch
Neoprene..............................................2-15
Polyurethane, Double-Sided..............2-22
Polyurethane, Polyester Cord............2-20
Polyurethane, Kevlar Cord.................2-20
XL
1/5"/5.08 mm Pitch
Double-Sided
Neoprene,
Fiberglass Reinforced....................2-59
Polyurethane, Kevlar Cord............2-60
Neoprene, Fiberglass Reinforced.....2-56
Polyurethane, Kevlar Cord.................2-58
Polyurethane, Polyester Cord............2-58
V-Belt..................................................................2-268
BEVEL GEAR DRIVES, RIGHT ANGLE
See Right Angle Drives
BEVEL GEAR SPEED REDUCERS
See Right Angle Drives
BEVEL GEARS, 20 P.A.
Commercial
Brass and Steel
24, 32 and 48 Pitch..................................1-207
Precision, Clamp Type
Aluminum and Stainless Steel
48 Pitch.....................................................1-203
64 Pitch.....................................................1-201
72 Pitch.....................................................1-199
Precision, Pin Type
Aluminum and Stainless Steel
48 Pitch.....................................................1-202
64 Pitch.....................................................1-200
72 Pitch.....................................................1-198
BLANKS, See Gear Blanks
BOLT SIZE SHIMS..................................................10-50
BORE REDUCERS
Inch To Inch, Aluminum.....................................4-24
Inch To Metric, Aluminum or Brass.................4-25
BRAKES, ELECTROMAGNETIC
Bu-ord
Size 11, Double End.....................................13-54
Size 11, Single End, Reverse-Acting.........13-55
Size 18, Double End.....................................13-56
Size 18, Duplex End......................................13-57
Size 18, Duplex End, Reverse-Acting........13-58
Size 18, Single End, Reverse-Acting.........13-59
BRAKES, ELECTROMAGNETIC (CONTINUED)

Power-Off
Cap Style.......................................................13-32
Parallel Plate Style......................................13-33
Servo, Splined Hub Type.............................13-29
Servo, Technical Notes...............................13-28
Power-On
Flange-Mounted Type.................................13-31
BRAKES, MAGNETIC PARTICLE..........................13-49
BUMPERS FOR SHAFT COLLARS, RUBBER........4-15
BU-ORD SIZE BRAKES, See Brakes
BU-ORD SIZE CLUTCHES, See Clutches
BU-ORD SIZE GEARHEADS
Also See Gearheads, Bu-ord Sizes
BU-ORD SIZE GEARHEADS
Selection Chart....................................................11-9
Technical Notes..................................................11-6
BU-ORD SIZE SPEED REDUCERS
Selection Chart....................................................11-9
Technical Notes..................................................11-6
BUSHINGS
"V" Guide Adjustable and Stationary..................9-9
Panel, Hexagonal, Aluminum and Brass.....10-102
Square Hole.........................................................4-32
C
CABLE ATTACHMENTS
Miniature Cables...............................................2-254
Synchromesh Drives........................................2-252
CABLES
Miniature, Stainless Steel, Nylon Coated.....2-254
CAM FOLLOWERS, Also See Idlers
CAM FOLLOWERS
Ball Bearings.....................................................15-21
Needle Bearings
Stud Type.......................................................15-22
Yoke Type, Heavy-Duty...............................15-23
Technical Notes................................................15-24
CAMS
Adjustable
Stainless Steel, Precision...........................15-17
Steel...............................................................15-18
Molded
Acetal.............................................................15-20
Acetal with Brass Insert.............................15-19
CAP NUTS
Hexagonal, Nylon..............................................10-27
CAP SCREWS
Hex Head
Nylon..............................................................10-23
PVC.................................................................10-24
Socket Head
Nylon..............................................................10-22
Stainless Steel..............................................10-18
A-3
R
T
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
A
ALPHABETICAL INDEX
R
T
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
A
CAP SCREWS (CONTINUED)

Socket Head (Continued)
Steel...............................................................10-19
Steel, Moly Coated......................................10-20
CAP SCREWS KIT..................................................10-21
CARRIAGE ASSEMBLIES........................................9-12
CENTER BOLT MOUNTS, RUBBER
Solo Type..............................................................8-40
Tandem Type........................................................8-41
CHAINS, LADDER, See Ladder Chains
CHAINS, LOCATOR CHART...................................2-223
CHAINS, ROLLER, See Roller Chains
CHANNEL MOUNTINGS
to 52 lbf/in.............................................................8-72
to 90 lbf.................................................................8-73
to 95 lbf.................................................................8-74
CHASSIS FASTENERS
Aluminum and Brass......................................10-101
CHASSIS HANDLES, See Handles
CLAMP KITS, FOR TIMING BELTS
See Timing Belt Clamp Kits
CLAMP TYPE SPUR GEARS, PRECISION
Also See Spur Gears (Precision)
CLAMP TYPE SPUR GEARS, PRECISION
20 P.A., 1/8" Face, Aluminum and
Stainless Steel
24 Pitch..........................................................1-140
32 Pitch..........................................................1-117
48 Pitch............................................................1-93
64 Pitch............................................................1-68
64 Pitch, Differential End Gear.....................1-71
72 Pitch............................................................1-51
80 Pitch............................................................1-41
96 Pitch............................................................1-36
CLAMPS
Gearhead Attaching.........................................11-41
Synchro
Locking..........................................................11-41
Mounting.......................................................11-32
CLAMPS, TIMING BELT, See Timing Belt Clamps
CLUSTER GEARS AND HUBS, PRECISION
20 P.A., Stainless Steel
48 Pitch..........................................................1-181
64 Pitch..........................................................1-179
72 Pitch..........................................................1-178
80 Pitch..........................................................1-177
CLUTCH AND BRAKE
Inertia and Torque Values...............................13-24
CLUTCH COUPLINGS, ELECTROMAGNETIC
Flange-Mounted................................................13-38
Shaft-To-Shaft Mount.......................................13-42
CLUTCH, NEEDLE ROLLER BEARINGS
with Support........................................................5-90
Standard...............................................................5-87
A-4
CLUTCH, NEEDLE ROLLER PRESSBEARINGS

Self-Clinching......................................................5-88
CLUTCHES, APPLICATION EXAMPLES .............13-34
CLUTCHES, .ELECTROMAGNETIC
Bu-ord
Size 11, Double End.....................................13-54
Size 18, Double End.....................................13-56
Size 18, Duplex End......................................13-57
Size 18, Duplex End, Reverse-Acting........13-58
Size 18, Triplex End......................................13-60
Flange-Mounted, For Parallel Loads.............13-37
Shaft-Mounted
For In-Line Loads.........................................13-36
For Parallel Loads........................................13-35
Spring-Wrapped
Technical Notes...........................................13-25
Unidirectional Input.....................................13-26
Unidirectional Input, High-Torque.............13-27
In-Line Slip
Application Examples....................................13-4
Technical Notes.............................................13-2
CLUTCHES, MAGNETIC CLUTCHES AND
COUPLINGS
.130 lbf in. Torque..............................................13-14
25 lbf in. Torque.................................................13-15
70 lbf in. Torque.................................................13-16
CLUTCHES, NEEDLE ROLLER PRESSBEARINGS
Self-Clinching, Installation Details.................13-20
Unidirectional Drives, Self-Clinching............13-19
CLUTCHES, ROLLER, UNIDIRECTIONAL DRIVES
with Bearing Support.......................................13-18
without Bearing Support.................................13-17
CLUTCHES, SLIP, HYSTERESIS............................13-23
CLUTCHES, SLIP, IN-LINE
Precision, Pin Type and Clamp Type..............13-44
Standard, Pin Type and Clamp Type..............13-46
CLUTCHES, SLIP, MAGNETIC PARTICLE............13-48
CLUTCHES, SLIP, See Slip Clutches
CLUTCHES, SLIP
Shaft-To-Shaft Mount, Coupling Type
with Optional Actuating Pin.......................13-42
Through Shaft Mount, with Bushing
and Optional Actuating Pin........................13-40
CLUTCHES, SPRING-WRAPPED
Slip.........................................................................13-7
Technical Notes.............................................13-5
COMPANION PULLEYS
For 1/4" V-Belts, Molded, Nylon......................2-269
COMPRESSION BASE MOUNTINGS
Aluminum, Stainless Steel Mesh,
to 1000 lbf.............................................................8-56
COMPRESSION SPRINGS
302 Stainless Steel, Spring Temper...............10-91
Rubber, to 7000 lbf...............................................8-76
CONICAL BUMPERS
Rubber, to 62 lbf...................................................8-30
ALPHABETICAL INDEX

2500 Cycle Life...................................................15-36
13000 Cycle Life.................................................15-37
20000 Cycle Life.................................................15-38
CONTROL-FLEX COUPLINGS
Heavy-Duty, Acetal Flexible Member..............6-61
Standard-Duty, Acetal Flexible Member.........6-60
COTTER PINS, STEEL............................................10-81
COUPLINGS, BELLOWS, See Bellows Couplings
COUPLINGS
Control-Flex
Heavy-Duty.....................................................6-61
Standard-Duty................................................6-60
Crowned Tooth Gear...........................................6-59
Disk Type, See Disk Type Couplings
Fairloc Rigid Shaft Couplings..........................6-76
Flexible Shaft, See Flexible Shaft Couplings
Geargrip, Neoprene Sleeve..............................6-56
Helical, See Helical Couplings
Jaw Type, Acetal................................................6-58
K Type, Polyurethane.........................................6-72
Magnetic Clutches and Couplings
.130 lbf in. Torque.........................................13-14
25 lbf in. Torque............................................13-15
70 lbf in. Torque............................................13-16
Magnetic Disk Couplings...................................6-52
Miniature Ball......................................................6-73
Multijawed, Precision........................................6-79
Neo-Flex, Also See Neo-Flex Couplings
Neoprene, Also See Neo-Flex Couplings
Oldham
Acetal Disc
Set Screw Hub Type.................................6-69
Split Hub Type............................................6-68
Precision
Stainless Steel...........................................6-67
Rubber Spider, Jaw Type...................................6-57
Shaft
Commercial, Steel, Rigid...............................6-79
Precision, Stainless Steel
Multijawed.................................................6-79
Set Screw Type.........................................6-77
Rigid, Fairloc Type........................................6-76
Sleeve Type.....................................................6-71
Slip, Shaft-To-Shaft Mount..............................13-42
Slit Type, See Slit Type Couplings
Spider Type..........................................................6-70
Spline Type
Heavy-Duty, Hytrel, Spline...........................6-55
Polyurethane Spline......................................6-54
Spring, Shock Absorbing, Stainless Steel......6-74
Torque Tube Acetal Tube
Aluminum Split Type Hubs............................6-78
Uniflex...................................................................6-75
CRIMPING TOOLS, SYNCHROMESH DRIVES...2-256

CROWNED TOOTH GEAR TYPE
Flexible Couplings...............................................6-59
CYLINDRICAL MOUNTINGS
Neoprene
Female Thread-to-Blank
to 45 lbf.......................................................8-33
Male Thread-to-Blank
to 50 lbf.......................................................8-34
Male-to-Female Thread
to 16 lbf.......................................................8-31
to 45 lbf.......................................................8-33
to 60 lbf.......................................................8-32
Male-to-Male Thread
to 50 lbf.......................................................8-34
Rubber
Female-to-Female Thread
to 86 lbf.......................................................8-28
to 210 lbf.....................................................8-27
Male-to-Male Thread
to 13.3 lbf....................................................8-16
to 25 lbf.......................................................8-17
to 28.5 lbf....................................................8-18
to 75 lbf.......................................................8-19
to 79 lbf.......................................................8-20
to 86 lbf.......................................................8-21
to 105 lbf.....................................................8-22
to 120 lbf.....................................................8-23
to 123 lbf.....................................................8-24
to 142 lbf.....................................................8-25
to 185 lbf.....................................................8-26
to 330 lbf.....................................................8-29
CYLINDRICAL/SQUARE MOUNTINGS
Rubber, to 14.5 lbf...........................................8-14
D
DAMPED SPRING MOUNTINGS
Selection Criteria, Technical Notes.................8-69
Steel Spring and Stainless Steel Mesh
to 200 lbf..........................................................8-67
to 750 lbf..........................................................8-68
to 1235 lbf........................................................8-70
to 2469 lbf........................................................8-71
DAMPERS, VIBRATION, SILICONE GEL
Flanged...................................................................8-6
Male-to-Male Thread...........................................8-7
Shock Absorbing
Chips................................................................8-10
Foam Sheets...................................................8-11
Sheets................................................................8-9
Tape..................................................................8-10
R
T
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
A-5
ALPHABETICAL INDEX
R
T
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
A
DIALS
Disc
Clockwise, Laser Engraved........................10-83
Counterclockwise, Laser Engraved..........10-84
Vernier and Disc Set...................................10-86
Drum
Clockwise, Laser Engraved........................10-85
Counterclockwise, Laser Engraved..........10-84
Vernier and Drum Set..................................10-86
Indexes...............................................................10-87
DIFFERENTIAL END GEARS
20 P.A., Aluminum and Stainless Steel
48 Pitch, 3/16" Face, Hubless.......................1-97
64 Pitch, 3/32" and 1/8" Face.........................1-75
72 Pitch, 1/8" Face..........................................1-56
96 Pitch, 5/64" and 3/32" Face.......................1-38
DIFFERENTIALS
Anti-Backlash, 72 Pitch....................................15-11
Hollow Shaft, 96 and 64 Pitch...........................15-8
Solid Shaft, 96 and 64 Pitch...............................15-9
Standard
64 Pitch..........................................................15-11
72, 64 and 48 Pitch.......................................15-10
96 Pitch............................................................15-7
DISC DIALS, LASER ENGRAVED
Clockwise...........................................................10-83
Counterclockwise.............................................10-84
Indexes...............................................................10-87
with Verniers......................................................10-86
DISK TYPE COUPLINGS
Double Disk, Set Screw Type
Low Torsional Stiffness, Lightweight..........6-47
Double Disk, Split Hub Type
High Torsional Stiffness, High Torque........6-49
Medium Torsional Stiffness,
Heavy-Duty.....................................................6-51
Selection Guide...................................................6-46
Single Disk, Split Hub Type
High Torsional Stiffness................................6-48
High Torsional Stiffness, Heavy-Duty.........6-50
DOWEL PINS
Precision
Hardened Stainless Steel...........................10-71
Stainless Steel..............................................10-70
Standard
Hardened Steel............................................10-72
DRILL RODS, PRECISION GROUND
1045 Tool Steel.....................................................3-14
DRIVES WHEELS, FRICTION................................15-35
DRUM DIALS, LASER ENGRAVED
Clockwise...........................................................10-85
Counterclockwise.............................................10-84
Indexes...............................................................10-87
with Verniers......................................................10-86
A-6
DUAL DRIVES
Heavy-Duty
Steel Helical Gears, 3SR Series................12-19
Light-Duty
Steel Helical Gears, 3SR Series................12-18
E
ELECTROMAGNETIC CLUTCH COUPLINGS
See Couplings, Electromagnetic Clutch
ELECTROMAGNETIC CLUTCHES, See Clutches
ELECTROMAGNETIC SPRING-WRAPPED
CLUTCHES, Technical Notes...........................13-25
ELECTROMECHANICAL LIMIT STOPS.................15-5
END FERRULES.......................................................10-43
EXTENSION SPRINGS...........................................10-89
EXTERNAL SPLINES, STOCK...............................1-255
F
FAIRLOC HUB SPUR GEARS, PRECISION, 20 P.A.
24 Pitch
.236" and .313" Face, Stainless Steel.........1-128
3/16" Face, Acetal with
Stainless Steel Hub.....................................1-134
32 Pitch
.250" and .197" Face, Stainless Steel.........1-104
Stainless Steel Hub.....................................1-110
48 Pitch
.250" and .197" Face, Stainless Steel...........1-76
Stainless Steel Hub.......................................1-84
64 Pitch
72 Pitch
Anti-Backlash, .104" Face, Aluminum
and Stainless Steel
48 Pitch..........................................................1-162
64 Pitch..........................................................1-159
72 Pitch..........................................................1-156
120 Pitch........................................................1-148
Mini-Lash, .104" Face Aluminum
and Stainless Steel
64 Pitch..........................................................1-175
72 Pitch..........................................................1-173
80 Pitch..........................................................1-171
96 Pitch..........................................................1-169
120 Pitch........................................................1-167
FAIRLOC HUB TIMING BELT PULLEYS
GT2, Aluminum, Double or No Flange
.079"/2 mm Pitch, For 6 mm Belts...............2-167
HTD, Aluminum, Double Flange
ALPHABETICAL INDEX
FAIRLOC HUB TIMING BELT PULLEYS

(CONTINUED)
HTD, Polycarbonate, Double or Single Flange
Technical Data...................................................2-184
Technical Notes..................................................2-75
XL, Polycarbonate, Double Flange
1/5"/5.08 mm Pitch, For 3/8" Belts.................2-76
XL, Polycarbonate, Single or No Flange
1/5"/5.08 mm Pitch, For 3/8" Belts.................2-77
FAIRLOC INTEGRAL FASTENER
Technical Notes....................................................2-0
with Integral Bearing Shim Spacers,
Brass or Stainless Steel....................................4-16
FAIRLOC SHAFT REDUCERS AND EXTENDERS
Stainless Steel.....................................................4-20
FAIRLOC RIGID SHAFT COUPLINGS...................6-76
FASTENERS, CHASSIS
Aluminum and Brass......................................10-101
FASTENING DEVICES, FAIRLOC
See Fairloc Integral Fastener
FASTENING DEVICES
FastLock Shaft Collars.......................................4-14
Grip Fast Shaft Collars.....................................4-12
Hub Bushings......................................................4-10
Hub Connectors....................................................4-9
Shaftloc Sleeves
Double-Ended...................................................4-5
Single-Ended....................................................4-6
Shaftloc
A-Type................................................................4-8
M-Type...............................................................4-7
FASTLOCK SHAFT COLLARS
Stainless Steel.....................................................4-14
FEED ROLLERS, URETHANE
without Bearings...............................................15-34
without Bearings, Set Screw Hub..................15-33
FERRULES, END......................................................10-43
Rubber, Steel Housing
to 37 lbf............................................................8-43
to 50 lbf............................................................8-44
FINGER-FLEX MOUNTINGS
Bushing Style and Ring, Rubber
to 12 lbf............................................................8-45
to 25 lbf............................................................8-46
to 37 lbf............................................................8-47.
to 80 lbf............................................................8-48
to 350 lbf..........................................................8-49
Technical Notes..................................................8-42
FITTINGS FOR CABLES, See Cable Attachments
FLANGE-MOUNTED CLUTCH COUPLINGS
For In-Line Loads, Electromagnetic...............13-38
FLANGE-MOUNTED CLUTCHES
For Parallel Loads, Electromagnetic..............13-37
FLANGE-MOUNTED WASHDOWN BEARINGS

FDA Compliant...................................................5-105
FLANGES, See Pulley Flanges
FLAT BELT PULLEYS
For 1/4" Wide Belts,
Polycarbonate with Aluminum Insert............2-267
FLAT BELTS
1/4" Wide, Polyester..........................................2-266
FLAT WASHERS FOR FOOT MOUNTS.................16-57
FLEXIBLE COUPLINGS, BALL TYPE......................6-73
FLEXIBLE COUPLINGS, BELLOWS
See Bellows Couplings
FLEXIBLE COUPLINGS, DISK TYPE
See Disk Type Couplings
FLEXIBLE COUPLINGS, HELICAL
See Helical Couplings
FLEXIBLE COUPLINGS, NEO-FLEX
See Neo-Flex Couplings
FLEXIBLE COUPLINGS, FLEXIBLE
See Flexible Shaft
FLEXIBLE COUPLINGS, SLIT TYPE
See Slit Type Couplings
FLEXIBLE COUPLINGS
Spring Type..........................................................6-74
Uniflex...................................................................6-75
FLEXIBLE SHAFT
With Casing
Steel Cable, Panel Mounting.......................6-86
Steel Cable......................................................6-84
Steel Cable, Sintered Bronze Bearings......6-85
Without Casing
Steel Cable, Panel Mounting.......................6-83
Phosphor Bronze Cable, Non-Magnetic....6-80
Stainless Steel Cable....................................6-81
Steel Cable......................................................6-82
FLEXI-HINGES
Application Examples.......................................15-12
Double End.........................................................15-16
Single End..........................................................15-15
Technical Data...................................................15-14
FOLLOWER ARM POTENTIOMETER
Application Example.........................................13-52
For Clutches and Brakes.................................13-52
FOOT MOUNTS
Flat Washers......................................................16-57
For Key Drives...................................................12-27
Galvanized Steel Base
Galvanized Steel Screw, 10 Articulation
1.97" Base......................................................16-43
3.15" Base......................................................16-44
3.15" Base with Mounting Tab....................16-47
3.94" Base......................................................16-45
4.72" Base......................................................16-46
A-7
R
T
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
A
ALPHABETICAL INDEX
R
T
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
A
FOOT MOUNTS, HARDWARE...............................16-56

FOOT MOUNTS
Polyamide Base,
1.57" Base......................................................16-12
1.97" Base......................................................16-13
2.56" Base......................................................16-14
3.27" Base......................................................16-15
4.06" Base......................................................16-16
4.84" Base......................................................16-17
Polyamide Base,
3.27" Base......................................................16-18
4.06" Base......................................................16-19
4.84" Base......................................................16-20
Polyamide Base,
Stainless Steel Screw, 30 Articulation
1.57" Base........................................................16-3
1.97" Base........................................................16-4
2.56" Base........................................................16-5
3.27" Base........................................................16-6
4.06" Base........................................................16-7
4.84" Base........................................................16-8
Polyamide Base,
3.27" Base........................................................16-9
4.06" Base......................................................16-10
4.84" Base......................................................16-11
Split Lock Washers...........................................16-58
Stainless Steel Base,
1.57" Base......................................................16-21
1.97" Base......................................................16-22
2.56" Base......................................................16-23
3.15" Base......................................................16-24
3.94" Base......................................................16-25
4.72" Base......................................................16-26
5.51" Base......................................................16-27
Stainless Steel Base,
1.97" Base......................................................16-28
3.15" Base......................................................16-29
3.94" Base .....................................................16-31
4.72" Base......................................................16-32
Stamped Black Cataphoresis Steel Base,
4.84" Base......................................................16-54
4.88" Base......................................................16-50
Stamped Galvanized Steel Base,
3.35" Base......................................................16-52
4.84" Base......................................................16-55
4.88" Base......................................................16-49
A-8
FOOT MOUNTS (CONTINUED)

Teknoclean, Stainless Steel Base,
USDA Approved Sealed Nut and Joint
3.15", 3.94" and 4.72" Base......................16-36
USDA Approved Sealed Nut
3.15", 3.94" and 4.72" Base......................16-37
Yellow Painted Steel Base,
1.97" Base......................................................16-38
2.56" Base......................................................16-39
3.15" Base......................................................16-40
3.94" Base......................................................16-41
4.72" Base......................................................16-42
FRACTIONAL H.P. V-BELTS...................................2-268
FRELON LINED LINEAR BEARINGS
Pillow Block
Closed Type.....................................................5-97
Open Type.......................................................5-98
Precision Series
Closed..............................................................5-20
Open.................................................................5-21
Self-Aligning
Closed..............................................................5-24
Sleeve Bearings
Flanged............................................................5-26
Plain.................................................................5-25
Standard Series
Closed..............................................................5-22
Open.................................................................5-23
Technical Notes..................................................5-19
FRICTION DRIVES WHEELS
Acetal with Brass Insert..................................15-35
G
G300 POLYMER BEARINGS
Technical Notes..................................................5-55
GEAR BLANKS
1/8" Face, Acetal................................................1-232
1/8", 3/16" and 1/4" Face, Acetal......................1-233
Hubless
1/8" Face, Aluminum-Acetal.......................1-231
GEAR CLAMPS
Commercial
Stainless Steel..............................................1-247
Balanced Type..............................................1-235
Two-Piece................................................1-249
One Piece and Split-Hub............................1-245
Screw Type...................................................1-253
Split-Hub........................................................1-239
Precision
Stainless Steel..............................................1-246
Balanced Type..............................................1-234
Two-Piece................................................1-248
One Piece and Split-Hub............................1-244
Screw Type...................................................1-252
Split-Hub........................................................1-238
ALPHABETICAL INDEX
GEAR HUBS
Clamp Type Hub
Stainless Steel..............................................1-230
Cluster Gear, Pin Type Hub
Stainless Steel..............................................1-227
Fairloc Hub
Stainless Steel..............................................1-225
Pin Type Hub
Aluminum......................................................1-228
Stainless Steel..............................................1-226
Removable
Stainless Steel..............................................1-229
GEARBOXES
See Right Angle Drives and Gearheads
GEARGRIP COUPLINGS, NEOPRENE SLEEVE.....6-56
GEARHEADS
Bu-ord Sizes
Selection Chart...............................................11-9
Size 8, Heavy-Duty.......................................11-10
Size 11, Heavy-Duty.....................................11-12
Size 11, Offset Shaft.....................................11-13
Size 11, Standard-Duty................................11-11
Size 11 Transducer
Anti-Backlash..........................................11-16
Standard Backlash.................................11-15
Zero Backlash.........................................11-17
Size 11, Zero Backlash................................11-14
Size 15
Heavy-Duty, 120 D.P. Pinion...................11-20
Standard-Duty
96 D.P. Pinion...........................................11-19
120 D.P. Pinion.........................................11-18
Size 18
Heavy-Duty..............................................11-22
Standard-Duty.........................................11-21
Technical Notes.............................................11-6
GEARHEADS, MOUNTING INSTRUCTIONS......11-64
GEARHEADS PLANETARY
See Planetary Gearheads
GEARHEADS SPUR
See Spur Gearheads
GEARHEADS ZERO BACKLASH
Technical Notes..................................................11-8
GEARMOTORS
Selection Chart....................................................14-1
D.C., 3, 6 and 12V...............................................14-23
NEMA Size 23......................................................14-3
Offset, NEMA Size 17.........................................14-2
GEARS
Also See Pinion Shafts
Also See Pinions
See Bevel Gears
See Clamp Type Spur
See Cluster Gears and Hubs Precision
See Differential End Gears
GEARS (CONTINUED)
See Fairloc Hub Spur
See Hardened Spur
See Helical Gears
See Hubless Spur
See Internal Gears
See Miter Gears
See Molded Spur Gears (Commercial)
See Nonmetallic
See Nonmetallic Spur
See Nonmetallic Spur Gears
See Pin Type Spur
See Pinion Shafts
See Pinion Wire
See Pinions
See Racks
See Spur Gear Stock
See Spur Gears (Commercial)
See Spur Gears (Precision)
See Spur Gears (Precision), Anti-Backlash
See Spur Gears (Precision), Mini-Lash
See Stamped Spur
See Worm Gears
See Worms
GENEVA MECHANISMS, PRECISION
4 and 5 Points......................................................15-3
6 and 8 Points......................................................15-4
GRIP FAST SHAFT COLLARS
Stainless Steel.....................................................4-12
Steel and Plastic, Low Cost...............................4-13
GRIP FAST, TECHNICAL NOTES..........................4-11
GROOVE PINS
Stainless Steel...................................................10-77
Steel
...................................................................10-78
Heavy-Duty........................................................2-260
Light or Medium-Duty
Molded, Acetal and Nylon..........................2-261
Nylon..............................................................2-262
GROOVED PULLEYS
Acetal, Brass Insert
for 1/16" Dia. Round Belts...........................2-264
for 1/8" Dia. Round Belts.............................2-265
for 3/32" Dia. Round Belts...........................2-265
for 1/8" Dia. Round Belt...............................2-263
GUIDE RAILS, "V" GUIDE
Utilitrak, Economy.............................................9-13
GUIDE WHEEL JOURNAL ASSEMBLIES
"V" Guide...............................................................9-11
GUIDE WHEELS
"V" Guide.................................................................9-8
Studded...........................................................9-10
R
T
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
A-9
ALPHABETICAL INDEX
R
T
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
A
H
HAMMER, PLASTIC...............................................15-52
HAND CRANKS, PRECISION..............................10-041
HANDLES
Chassis and Oval...............................................10-42
Round..................................................................10-43
HANGERS, BEARING
Aluminum, Precision........................................5-112
HARDENED SPUR GEARS PRECISION
20 P.A., 1/4" and 3/8" Face, Steel
24 Pitch............................................................1-25
32 Pitch............................................................1-22
48 Pitch............................................................1-19
HARDWARE FOR FOOT MOUNTS.......................16-56
HELICAL COUPLINGS
Clamp Type, Stainless Steel..............................6-25
Long Series
Set Screw Type, Aluminum..........................6-33
Set Screw Type, Stainless Steel.................6-31
Split Hub Type, Aluminum.............................6-32
Split Hub Type, Stainless Steel....................6-30
Selection Guide...................................................6-24
Set Screw Type, Stainless Steel......................6-25
Short Series
Set Screw Type, Stainless Steel.................6-27
Split Hub Type, Stainless Steel....................6-26
HELICAL GEARS
Commercial
20 Pitch, 45 Helical Angle, Steel..............1-189
Precision
48 Normal Pitch, 45 Helical Angle,
Stainless Steel and Aluminum...................1-188
HEX HOLE SLEEVES.................................................4-32
HEX STOCK...............................................................4-31
HEXAGONAL NUTS FOR FOOT MOUNTS..........16-56
HEXAGONAL NUTS
Nylon, Cap and Lock Type...............................10-27
Nylon...................................................................10-26
Stainless Steel...................................................10-12
Locknut, with Nylon Insert.........................10-25
Steel, Zinc Plated..............................................10-12
HEXAGONAL SPACERS, THREADED
Aluminum, Brass, and Stainless Steel..........10-96
HEXAGONAL STAND-OFFS, THREADED
Brass.................................................................10-100
Stainless Steel...................................................10-99
HEXAGONAL WRENCHES....................................10-21
HI-FLEX BELLOWS COUPLINGS
Also See Bellows Couplings
HINGE BEARINGS, See Flexi-Hinges
HITCH PINS
Internal and External, Spring Wire................10-82
A-10
HOUSINGS, BEARING
Commercial, Flanged
Sintered Aluminum...........................................5-113
Precision, Aluminum........................................5-111
HUB BUSHINGS, LOCKING
Steel......................................................................4-10
HUB CONNECTORS, PRESSURE LOCKING
Hardened Steel.....................................................4-9
HUBLESS SPUR GEARS, COMMERCIAL
24 Pitch, 14-1/2 P.A.
1/4" Face
Brass.........................................................1-143
Steel..........................................................1-142
3/32" and 7/32" Face, Nylon.........................1-139
32 Pitch, 14-1/2 P.A.
1/16" Face, Brass..........................................1-121
3/16" Face
Brass.........................................................1-122
Nylon.........................................................1-126
Steel..........................................................1-120
5/16" Face, Bakelite.....................................1-127
32 Pitch, 20 P.A.
3/16" Face, Steel...........................................1-119
48 Pitch, 14-1/2 P.A.
1/8" Face
Brass...........................................................1-98
Nylon.........................................................1-103
HUBLESS SPUR GEARS, PRECISION, 20 P.A.
16 Pitch
1/2" and 3/8" Face,
Nylon with Stainless Steel.........................1-146
24 Pitch
3/16" Face, Acetal........................................1-135
3/8" and 1/4" Face,
1/8" Face, Aluminum-Acetal.......................1-145
32 Pitch
3/16" Face, Acetal........................................1-111
3/8" Face, Nylon with Stainless Steel.......1-124
1/8" Face
Aluminum with Stainless Steel.............1-118
Aluminum-Acetal....................................1-125
1/4" Face, Nylon with Stainless Steel.......1-124
48 Pitch
3/16" Face, Acetal..........................................1-85
3/8" and 1/4" Face,
1/8" Face
Aluminum and Stainless Steel................1-96
Aluminum-Acetal....................................1-102
64 Pitch
3/16" Face, Acetal..........................................1-65
1/8" Face
Aluminum with Stainless Steel...............1-72
Aluminum-Acetal......................................1-74
ALPHABETICAL INDEX
HUBLESS SPUR GEARS, PRECISION, 20 P.A.

(CONTINUED)
72 Pitch
3/16" Face, Acetal..........................................1-49
1/8" Face
Aluminum with Stainless Steel...............1-54
Aluminum-Acetal......................................1-55
80 Pitch
1/8" Face,
Aluminum with Stainless Steel....................1-42
96 Pitch
1/8" Face,
120 Pitch
1/8" Face,
HYSTERESIS BRAKES AND CLUTCHES
Application Example.........................................13-22
Technical Notes................................................13-21
HYSTERESIS SLIP CLUTCHES.............................13-23
I
IDLER PULLEYS
Steel with Needle Bearing..............................2-271
IDLER ROLLERS
Polyether Roller Stainless Steel Shaft..........15-32
IDLERS
Also See Cam Followers
Also See Rollers
IDLERS
Stainless Steel, Ball Bearings........................15-30
Stainless Steel,
Sintered Bronze Bearings Low Cost..............15-31
INDEXES FOR DISC AND DRUM DIALS.............10-87
INERTIA MATCHING EXAMPLE
Technical Notes..............................................11-101
INSPECTION MIRROR...........................................15-52
INSTALLATION DETAILS
For Needle Roller Clutch Pressbearings.......13-20
INSTRUMENT SCREW DRIVERS
Assorted Set......................................................15-52
INSULATORS, SCREW, MOLDED.........................10-44
INTERMITTENT MOTION MECHANISMS
Geneva..................................................................15-3
Ratchet and Pawls..............................................15-6
INTERNAL GEARS, PRECISION
24 Pitch and 32 Pitch
14-1/2 P.A., 3/16" and 1/4" Face, Brass....1-193
20 P.A., 1/8" Face,
Aluminum and Stainless Steel...................1-192
48 Pitch
14-1/2 P.A., 1/8" Face, Brass......................1-193
20 P.A., 1/8" Face,
INTERNAL GEARS, PRECISION (CONTINUED)

64 Pitch
20 P.A., 1/8" Face,
72 Pitch and 96 Pitch
20 P.A., 1/8" Face,
INTERNAL SPLINES, STOCK................................1-255
ISO-PAD MOUNTS
to 4000 lbf.............................................................8-87
ISO-PAD SHEETS
For Bolt Insulator and Shim...............................8-89
ISO-PADS
to 100 psi...............................................................8-88
to 120 psi...............................................................8-90
J
J POLYMER BEARINGS
Technical Notes..................................................5-30
JAW TYPE COUPLINGS
Fiberglass Hubs, Acetal Spider........................6-58
Sintered Iron Hubs, Rubber Spider..................6-57
K
K TYPE COUPLINGS
Polyurethane, Inverted Hub..............................6-72
KEYS
Rectangular Stock..............................................4-30
Square Machine and Woodruff........................4-29
KNOBS
Precision Knurled.............................................10-40
Thumb Screw
Assorted Kits................................................10-36
Round, Tee and Rosette..............................10-35
KNURLED KNOBS, Also See Thumb Screws
KNURLED KNOBS, PRECISION............................10-40
KNURLED THUMB SCREWS, See Thumb Screws
L
LADDER CHAIN SPROCKETS
.353" Pitch, Size 14, .170" Face
Acetal
Brass Insert.............................................2-245
No Insert...................................................2-246
Steel..........................................................2-244
Brass.........................................................2-243
.286" Pitch, Size 18
.100" Face, Acetal
Brass Insert.............................................2-241
No Insert...................................................2-242
.120" Face
Brass.........................................................2-240
Steel..........................................................2-239
R
T
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
A-11
ALPHABETICAL INDEX
R
T
1
2
3
4
5
6
7
8
9
10
11
12
13
14
LADDER CHAIN SPROCKETS (CONTINUED)

.185" Pitch, Size 19
.087" Face
Brass.........................................................2-236
Steel..........................................................2-235
.100" Face, Acetal
Brass Insert.............................................2-237
No Insert...................................................2-238
.167" Pitch, Size 21, .065" Face
Acetal
Brass Insert.............................................2-233
No Insert...................................................2-234
LADDER CHAINS AND SPROCKETS
Locator Chart.........................................................2-4
LADDER CHAINS
.353" Pitch, Size 14.............................................2-244
.353" Pitch, Size 17.............................................2-243
.286" Pitch, Size 18.............................................2-239
.185" Pitch, Size 19.............................................2-235
.167" Pitch, Size 21.............................................2-233
1/4" and 3/8" Pitch..............................................2-247
LEVELING FEET, See Foot Mounts
LIMIT STOPS, ELECTROMECHANICAL................15-5
LINEAR BALL BEARINGS
See Ball Bearings, Linear
LINEAR BEARINGS
Also See Frelon Lined Linear Bearings
LOCK WASHERS, See Washers
LOCKING DEVICES, See Fairloc Integral Fastener
LOCKING DEVICES
FastLock Shaft Collars.......................................4-14
Grip Fast Shaft Collars.....................................4-12
Low Cost..........................................................4-13
Shaftloc Sleeves
Double-Ended...................................................4-5
Single-Ended....................................................4-6
Shaftloc
A-Type................................................................4-8
M-Type...............................................................4-7
LOCKING HUB BUSHINGS, STEEL........................4-10
LOCKNUTS, See Hexagonal Nuts
LUBE KIT, OIL AND GREASE................................15-52
LUBRICANTS
Cutting Oil...........................................................15-55
Gear Grease, Heavy-Duty................................15-53
Moly Lift-Truck Grease, Heavy-Duty..............15-53
Moly Open Chain Lube.....................................15-54
Penetrating and Cleaning Oil..........................15-55
PTFE Dry Film.....................................................15-54
Silicone, General Purpose...............................15-54
M
M250 POLYMER BEARINGS
Technical Notes..................................................5-65
15
A
A-12
MACHINE FEET, See Foot Mounts

MACHINE MOUNTS, See Foot Mounts
MACHINE SCREWS
Binding Head, Molded Nylon and PVC..........10-15
Fillister Head, Flat Head and Round Head
Molded Nylon...............................................10-15
Steel Core.................................................10-14
Stainless Steel..............................................10-13
Hexagon Head and Pan Head
Molded Nylon...............................................10-15
Round Washer Head
Molded Nylon, Steel Core..........................10-14
MAGNETIC CLUTCHES AND COUPLINGS
Nonelectric
.130 lbf in. Torque.........................................13-14
25 lbf in. Torque............................................13-15
70 lbf in. Torque............................................13-16
Operating Curves..............................................13-13
MAGNETIC DISK COUPLINGS...............................6-52
MAGNETIC PARTICLE BRAKES...........................13-49
MAGNETIC PARTICLE CLUTCHES.......................13-48
MAGNETIC PARTICLE CLUTCHES AND BRAKES
Power Supply
Enclosed........................................................13-50
Open...............................................................13-51
Technical Notes................................................13-47
METAL SHEET SHIM SETS, ALUMINUM...........15-50
METAL SHEET SHIMS
Brass, Steel, and Stainless Steel...................15-49
METAL THREADED RODS
Aluminum, Brass, Steel and
Stainless Steel...................................................10-16
MINIATURE BALL COUPLINGS.............................6-73
MINIATURE ROLLER CHAINS
.1475" Pitch
Nylatron GS...................................................2-222
Stainless Steel..............................................2-220
MINI-LASH GEARS
See Spur Gears (Precision), Mini-Lash
MIRRORS, INSPECTION MIRRORS...................15-052
MITER GEARS, COMMERCIAL, 20 P.A.
20, 24, 32 and 48 Pitch......................................1-204
MITER GEARS, PRECISION, 20 P.A.
Clamp Type
48 Pitch..........................................................1-203
64 Pitch..........................................................1-201
72 Pitch..........................................................1-199
Pin Type
48 Pitch..........................................................1-202
64 Pitch..........................................................1-200
72 Pitch..........................................................1-198
MODULAR BELLOWS COUPLINGS
Technical Data.....................................................6-12
ALPHABETICAL INDEX
MOLDED BEVEL GEARS, COMMERCIAL, 20 P.A.

24, 32, and 48 Pitch...........................................1-206
MOLDED GEAR BLANKS, See Gear Blanks
MOLDED MITER GEARS, COMMERCIAL, 20 P.A
16, 24, 32 and 48 Pitch......................................1-205
MOLDED RACKS, COMMERCIAL, 14-1/2 P.A.
16, 24, 32 and 48 Pitch......................................1-197
MOLDED SPROCKETS, See Plastic Sprockets
MOLDED SPUR GEARS, COMMERCIAL
16 Pitch
14-1/2 and 20 P.A., Nylon.........................1-147
24 Pitch
14-1/2 P.A.
with and without Hub, Nylon.................1-139
20 P.A.
1/4" and 3/8" Face, Nylon........................1-139
1/4" Face, Acetal.....................................1-138
1/4" Face, Acetal with Brass Insert......1-137
32 Pitch
14-1/2 P.A., Nylon........................................1-116
Hubless, 3/16" Face, Nylon....................1-126
20 P.A. 3/16" Face
Acetal........................................................1-115
Acetal with Brass Insert........................1-113
48 Pitch
14-1/2 P.A., Hubless, 1/8" Face, Nylon.....1-103
MOLDED SPUR GEARS, PERCISION
32 Pitch
20 P.A., 3/16" Face, Acetal.........................1-114
MOLDED SPUR GEARS
Also See Nonmetallic Spur Gears
MOLDED TIMING BELT PULLEYS
40 D.P., .082"/2.07 mm Pitch, For 1/4" Belts
Double Flange
Acetal, Brass Insert..................................2-48
Acetal, No Insert.......................................2-52
Single Flange
Acetal, Brass Insert..................................2-50
Acetal, No Insert.......................................2-53
GT2, Polycarbonate, .079"/2 mm Pitch
For 6 mm Belts
Double Flange

Brass Insert........................................2-171

No Insert.............................................2-172
Single Flange
No Insert.............................................2-173
GT2, Polycarbonate, 118"/3 mm Pitch
For 9 mm Belts
Double Flange
Aluminum Insert.................................2-187
No Insert.............................................2-190
Single Flange
Aluminum Insert.................................2-189
No Insert.............................................2-191
MOLDED TIMING BELT PULLEYS (CONTINUED)

HTD, .118"/3 mm Pitch, For 9 mm Belts
Double Flange
Nylon, Steel Insert, Shaftloc...............2-133
Polycarbonate
Aluminum Insert.................................2-126
No Insert.............................................2-130
No Flange, Polycarbonate
Aluminum Insert.................................2-129
Single and No Flange, Polycarbonate
No Insert.............................................2-131
Single Flange, Polycarbonate
Aluminum Insert.................................2-128
Double Flange, Polycarbonate
Aluminum Insert......................................2-149
No Insert...................................................2-153
Single and Double Flange, Polycarbonate
Aluminum Hub.........................................2-148
Fairloc Hub.............................................2-147
Single Flange, Polycarbonate
Aluminum Insert......................................2-151
No Insert...................................................2-154
Double Flange
Nylon, Aluminum Insert.........................2-155
Single and Double Flange
Nylon, Steel Insert, Shaftloc...............2-157
Single Flange
Double Flange
Single Flange
L, 3/8"/9.53 mm Pitch
For 3/4" Belts
Single and Double Flange, Polycarbonate,
Aluminum Insert......................................2-108
For 1/2" Belts
Double Flange
Nylon, Aluminum Insert....................2-109
Nylon, Steel Insert, Shaftloc..........2-111
Polycarbonate,
Aluminum Insert.................................2-107
Single Flange
Nylon, Aluminum Insert....................2-110
MXL, .080"/2.03 mm Pitch, For 1/4" Belts
Single & Double Flange, Polycarbonate
Aluminum Hub...........................................2-31
Brass Insert...............................................2-32
Hubless.......................................................2-34
No Insert.....................................................2-33
A-13
R
T
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
A
ALPHABETICAL INDEX
R
T
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
A
MOLDED TIMING BELT PULLEYS (CONTINUED)

XL, 1/5"/5.08 mm Pitch, For 3/8" Belts
Double Flange
Acetal, No Insert.......................................2-92
Nylon, No Insert........................................2-94
Steel Insert, Shaftloc........................2-97
Polycarbonate
Aluminum Hub......................................2-78
Aluminum Insert...................................2-80
Fairloc Hub..........................................2-76
No Insert...............................................2-89
with Set Screws...................................2-87
No Flange
Nylon, No Insert........................................2-96
Polycarbonate
Aluminum Insert...................................2-86
Fairloc Hub..........................................2-77
No Insert...............................................2-91
Single and No Flange, Polycarbonate
Aluminum Hub......................................2-79
with Set Screws...................................2-88
Single Flange
Acetal, No Insert.......................................2-93
Nylon, No Insert........................................2-95
Steel Insert, Shaftloc........................2-97
Polycarbonate
Aluminum Insert...................................2-83
Fairloc Hub..........................................2-77
No Insert...............................................2-90
MOLDED WORM GEARS, COMMERCIAL
24 Pitch, Right-Hand
14-1/2 P.A., Single Thread
Nylon.........................................................1-221
Nylon with Brass Insert.........................1-222
20 P.A., Double Thread
Nylon.........................................................1-223
Nylon with Brass Insert.........................1-224
Acetal........................................................1-221
Acetal........................................................1-223
Acetal........................................................1-221
Acetal........................................................1-223
MOLDED WORMS, COMMERCIAL
24, 32 and 48 Pitch, Right-Hand, Nylon
14-1/2 P.A., Single Thread.........................1-221
20 P.A., Double Thread..............................1-223
A-14
MOTORS, Also See Gearmotors

MOTORS, HYBRID STEPPER
NEMA Size 11......................................................14-7
NEMA Size 14......................................................14-9
NEMA Size 17....................................................14-11
NEMA Size 23, 160V D.C..................................14-15
NEMA Size 23, 80V D.C....................................14-13
NEMA Size 34, Heavy Duty..............................14-19
NEMA Size 34, Standard Duty........................14-17
NEMA Size 42....................................................14-21
MOUNTING INSTRUCTIONS
Gearheads .........................................................11-64
NEMA Size and Spur Gearheads...................11-44
MOUNTING PLATES, PRECISION
Bearing, Aluminum...........................................5-112
MOUNTINGS, SAFETY CHANNEL
to 52 lbf/in. ...........................................................8-72
to 90 lbf.................................................................8-73
to 95 lbf.................................................................8-74
MOUNTINGS, VIBRATION, See Vibration Mounts
MOUNTS
See Foot Mounts, or Leveling Feet
Vibration, See Vibration Mounts
MULTIJAWED COUPLINGS, PRECISION.............6-79
N
NEEDLE BEARING INNER RACES.........................5-81
NEEDLE ROLLER BEARINGS
Flange-Mounted Pressbearings
Nonaligning.....................................................5-86
Self-Aligning...................................................5-85
Pillow Blocks, Miniature
Sintered Aluminum Body.................................5-102
Press-Fit Pressbearings....................................5-84
Self-Clinching Pressbearings
Self-Aligning or Nonaligning.............................5-82
Standard...............................................................5-80
Installation Details............................................13-20
Self-Clinching
Installation Details.........................................5-89
Undirectional Drives....................................13-19
NEEDLE ROLLER CLUTCHES
Self-Clinching Pressbearings...........................5-88
Standard...............................................................5-87
Unidirectional Drives
with Bearing Support..................................13-18
without Bearing Support............................13-17
with Bearing Support.........................................5-90
Acetal Drums.....................................................15-47
Nylon Drums......................................................15-46
NEG'ATOR SPRING MOTORS............................15-39
NEMA SIZED PLANETARY GEARHEADS
See Spur Gearheads
ALPHABETICAL INDEX
NEO-FLEX COUPLINGS
Long Series, Neoprene Center
Fairloc Hubs..................................................6-65
Pin Type Hubs.................................................6-66
Miniature Series, Neoprene Center................6-62
Short Series, Neoprene Center
Fairloc Hubs.................................................6-63
Pin Type Hubs.................................................6-64
NEOPRENE COUPLINGS
Also See Neo-Flex Couplings
NONMETALLIC BEARINGS
Clip Bearings, Industrial Grade M250 Polymer
Beveled Edges................................................5-63
Double Flange.................................................5-64
Pillow Blocks
Ertalyte TX, Nylon Molded Body.............5-107
L280 Polymer...............................................5-103
Rod Ends
Female...........................................................5-109
Male...............................................................5-108
Sleeve Bearings
Acetron, Plain and Flanged........................5-50
Ertalyte TX, Plain and Flanged...................5-50
General Purpose G300 Polymer
Flanged.......................................................5-53
Plain............................................................5-52
High Temperature T500 Polymer
Flanged.......................................................5-57
Plain............................................................5-56
Industrial Grade M250 Polymer
Flanged.......................................................5-61
Plain............................................................5-60
Technical Notes..................................................5-49
NONMETALLIC SPUR GEARS MACHINED
COMMERCIAL
32 Pitch , 14-1/2 P.A.
Hubless, 5/16" Face, Bakelite.....................1-127
48 Pitch, 20 P.A.
1/8" Face, Acetal with Brass Insert............1-88
64 Pitch, 20 P.A.
1/8" Face, Acetal with Brass Insert.............1-67
PRECISION
16 Pitch, 20 P.A.
Hubless, 3/8" and 1/2" Face,
24 Pitch, 20 P.A.
Fairloc Hub, Stainless Steel
3/16" Face, Acetal...................................1-134
Hubless
3/16" Face, Acetal...................................1-135
3/8" and 1/4" Face,
Nylon with Stainless Steel....................1-144
Pin Type Hub, Stainless Steel
3/16" Face, Acetal...................................1-136

PRECISION (CONTINUED)
32 Pitch, 20 P.A.
3/16" Face, Acetal...................................1-110
Hubless
3/16" Face, Acetal...................................1-111
3/8" and 1/4" Face,
3/16" Face, Acetal...................................1-112
48 Pitch, 20 P.A.
3/16" Face, Acetal.....................................1-84
Hubless
3/16" Face, Acetal.....................................1-85
3/8" and 1/4" Face,
3/16" Face, Acetal.....................................1-86
64 Pitch, 20 P.A.
3/16" Face, Acetal.....................................1-64
Hubless
3/16" Face, Acetal.....................................1-65
3/16" Face, Acetal.....................................1-66
72 Pitch, 20 P.A.
3/16" Face, Acetal.....................................1-48
Hubless
3/16" Face, Acetal.....................................1-49
3/16" Face, Acetal.....................................1-50
NONMETALLIC SPUR GEARS, MOLDED
COMMERCIAL
48 Pitch
14-1/2 P.A., 1/8" Face, Nylon........................1-92
20 P.A., 1/8" Face
Acetal..........................................................1-91
Acetal with Brass Insert..........................1-89
PRECISION
48 Pitch
20 P.A., 1/8" Face, Acetal.............................1-90
See Molded Spur Gears
NUTS
Hexagonal..........................................................10-12
for Foot Mounts............................................16-56
NUTS, HEXAGONAL, See Hexagonal Nuts
NYLON SCREWS, See Machine Screws
O
O RING
Replacement For Friction Drives Wheels.....15-35
A-15
R
T
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
A
ALPHABETICAL INDEX
R
T
OLDHAM COUPLINGS
Precision..............................................................6-67
Set Screw Hub Type...........................................6-69
Split Hub Type......................................................6-68
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
A
PAD AND SPRING MOUNTS

Stainless Steel, Aluminum Base and Caps
to 4.4 lbf ................................................................8-55
PAD MOUNTS, See Vibration Mounts
PANEL BUSHINGS
Hexagonal, Aluminum and Brass.................10-102
PAWLS, STEEL..........................................................15-6
PILLOW BLOCKS AND ROD END, POLYMER
Technical Notes................................................5-110
PILLOW BLOCKS
Ball Bearings, Miniature,
Sintered Aluminum Body...................................5-99
Bearing Housings,
Sintered Aluminum, Commercial....................5-114
Ertalyte TX Bearings,
Nylon Molded Body..........................................5-107
Frelon Lined Aluminum
Closed Type.....................................................5-97
Open Type.......................................................5-98
L280 Polymer Bearings,
Thermoplastic Body.........................................5-103
Needle Roller Bearings, Miniature
No Bearing, Zinc Die Cast Body.....................5-106
PTFE Bronze Bearings, Miniature,
Flanged, Zinc Die Cast Body......................5-106
Miniature, Sintered Aluminum Body........5-100
Plain, Zinc Die Cast Body...........................5-106
Washdown, Stainless Steel Body,
Acetal Bearings, FDA Compliant....................5-104
PIN TYPE SPUR GEARS, PRECISION, 20 P.A.
3/16" Face, Acetal with Stainless Steel Hub
24 Pitch..........................................................1-136
32 Pitch..........................................................1-112
48 Pitch............................................................1-86
64 Pitch............................................................1-66
72 Pitch............................................................1-50
PIN TYPE SPUR GEARS PRECISION
Also See Spur Gears Precision
PINION SHAFTS, COMMERCIAL
Undersized Diameter, Stainless Steel.............1-14
PINION SHAFTS, PRECISION, 20 P.A.
24, 32, 48, 64, 72, 80 and 96 Pitch......................1-13
48, 64, 72, 80, 96 and 120 Pitch..........................1-12
PINION WIRE, 14-1/2 AND 20 P.A.
20 Pitch...............................................................1-187
A-16
PINION WIRE, 14-1/2 AND 20 P.A. (CONTINUED)

24 and 32 Pitch..................................................1-185
44 and 48 Pitch..................................................1-184
64 Pitch...............................................................1-183
PINIONS, 20 P.A.
24 Pitch, 1/4" Face...............................................1-17
32 Pitch, 1/4" Face...............................................1-16
48 Pitch, 5/32" Face.............................................1-15
64 Pitch, 5/32" Face.............................................1-14
PINS
Cotter, Steel.......................................................10-81
Dowel
Precision, Hardened Stainless Steel........10-71
Precision, Stainless Steel...........................10-70
Standard, Hardened Steel..........................10-72
Groove, Stainless Steel....................................10-77
Steel
..............................................................10-78
Hitch, Internal & External, Spring Wire.........10-82
Roll
Stainless Steel..............................................10-73
Steel...............................................................10-74
Spirol
Stainless Steel..............................................10-75
Steel...............................................................10-76
Taper
Stainless Steel..............................................10-79
Steel...............................................................10-80
PLANETARY GEARHEADS
CG, Compact Series
NEMA Size 17...............................................11-52
NEMA Size 23...............................................11-53
NEMA Size 34...............................................11-54
Technical Notes...........................................11-51
EG, Economy Series
NEMA Size 17...............................................11-59
NEMA Size 23...............................................11-60
NEMA Size 34...............................................11-61
NEMA Size 42...............................................11-62
NEMA Inline, Selection Chart.........................11-45
NEMA Size Mounting Instructions................11-44
PG, Precision Series
NEMA Size 17...............................................11-55
NEMA Size 23...............................................11-56
NEMA Size 34...............................................11-57
NEMA Size 42...............................................11-58
PRX and RTX Technical Notes........................11-46
PRX, Heavy-Duty
NEMA Size 23...............................................11-47
Precision Series, NEMA Size 34................11-48
Right Angle, Dual-Output, EG, Economy Series
NEMA Size 17.............................................11-110
NEMA Size 23.............................................11-112
NEMA Size 34.............................................11-114
NEMA Size 42.............................................11-116
ALPHABETICAL INDEX
Right Angle, Dual-Output, PG, Precision Series

NEMA Size 17.............................................11-102
NEMA Size 23.............................................11-104
NEMA Size 34.............................................11-106
NEMA Size 42.............................................11-108
Right Angle, EG, Economy Series
NEMA Size 17...............................................11-84
NEMA Size 23...............................................11-86
NEMA Size 34...............................................11-88
NEMA Size 42...............................................11-90
NEMA Size Selection Chart............................11-75
Right Angle, PG, Precision Series
NEMA Size 17...............................................11-76
NEMA Size 23...............................................11-78
NEMA Size 34...............................................11-80
NEMA Size 42...............................................11-82
Right Angle, T-Series
NEMA Size 23...............................................11-92
NEMA Size 34...............................................11-94
NEMA Size 42...............................................11-96
RTX, Precision Series, Standard-Duty
NEMA Size 23...............................................11-49
NEMA Size 34...............................................11-50
Selection Chart, Dual Output..........................11-75
Technical Notes................................................11-42
T-Series
NEMA Size 23...............................................11-66
NEMA Size 34...............................................11-68
NEMA Size 42...............................................11-70
PLASTIC HAMMER................................................15-52
PLASTIC ROLLER CHAINS
.1227" Pitch, Subminiature...............................2-218
.1475" Pitch.........................................................2-222
1/4", 3/8" and 1/2" Pitch.....................................2-224
PLASTIC SHEET SHIM SETS................................15-51
PLASTIC SPROCKETS
.1227" Pitch, Subminiature, Acetal.................2-219
.1475" Pitch, Miniature, Nylatron GS..............2-222
.167" Pitch, Size 21, .065" Face, Acetal
Brass Insert..................................................2-233
No Insert........................................................2-234
Brass Insert..................................................2-237
No Insert........................................................2-238
Brass Insert..................................................2-241
No Insert........................................................2-242
Brass Insert..................................................2-245
No Insert........................................................2-246
1/2" Pitch, Acetal and Nylatron GS.................2-232
1/4" Pitch, Acetal...............................................2-230
1/4" Pitch, Nylon................................................2-229
3/8" Pitch, Nylatron GS.....................................2-232
PLASTIC THREADED RODS..................................10-17
PLATEMOUNTS
Diamond Shaped Base, Steel, To 760 lbf.........8-39
Rubber
Aluminum and Steel
to 20 lbf.......................................................8-35
to 26 lbf.......................................................8-36
to 60 lbf.......................................................8-37
to 90 lbf.......................................................8-38
Square Shaped Base, Steel
to 135 lbf.....................................................8-50
POSI-DRIVE BELT DRIVES
Locator Chart.........................................................2-3
POSI-DRIVE BELTS
Single Core
20 Pitch..........................................................2-211
32 Pitch..........................................................2-204
Twin Core, Polyurethane
.1475" C.P........................................................2-208
20 Pitch..........................................................2-214
POSI-DRIVE SPROCKETS
Clamp Type Hub
.1475" C.P., For Twin Core Belts..................2-210
20 Pitch, For Single Core Belts..................2-213
20 Pitch, For Twin Core Belts.....................2-216
Pin Type Hub
.1475" C.P., For Twin Core Belts..................2-209
20 Pitch, For Twin Core Belts.....................2-215
POSTS, SPRING.....................................................10-88
POTENTIOMETER
Follower Arm For Clutches and Brakes........13-52
Shaftlocks, Nut Type, Brass..............................4-18
POWER SUPPLY FOR CLUTCHES AND BRAKES
Enclosed.............................................................13-50
Open....................................................................13-51
POWER-OFF CAP STYLE BRAKES
Electromagnetic................................................13-32
POWER-OFF PARALLEL PLATE STYLE BRAKES
Electromagnetic................................................13-33
Electromagnetic, Splined Hub Type...............13-29
Technical Notes................................................13-28
POWER-ON SERVO BRAKES
Electromagnetic, Flange-Mounted Type.......13-31
Technical Data.....................................................6-17
PRESSBEARINGS
Flange-Mounted, Needle Roller
Nonaligning.....................................................5-86
Self-Aligning...................................................5-85
Flange-Mounted, PTFE Acetal
Self-Aligning...................................................5-79
A-17
R
T
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
A
ALPHABETICAL INDEX
R
T
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
A
PRESSBEARINGS (C0NTINUED)
Flange-Mounted, PTFE Bronze
Nonaligning.....................................................5-78
Self-Aligning...................................................5-77
Flange-Mounted, Sintered Bronze
Self-Aligning...................................................5-76
Needle Roller Clutch, Self-Clinching...............5-88
Press-Fit Type
Needle Roller..................................................5-84
PTFE Acetal.....................................................5-75
Sintered Bronze.............................................5-74
Selection Chart....................................................5-66
Self-Clinching Type
Needle Roller
Self-Aligning or Nonaligning...................5-82
PTFE Acetal, Self-Aligning...........................5-72
PTFE Bronze
Nonaligning................................................5-70
Self-Aligning..............................................5-68
Sintered Bronze.............................................5-67
PRESSURE LOCKING HUB CONNECTORS
Hardened Steel.....................................................4-9
PTFE BRONZE BEARINGS
Pillow Blocks, Miniature..................................5-101
PULLEY FLANGES
40 D.P. and MXL
for .080"/2.03 mm Pitch Pulleys....................2-39
GT2
for .079"/2 mm Pitch Pulleys.......................2-164
HTD
L
for 3/8"/9.53 mm Pitch Pulleys....................2-103
MXL and 40 D.P.
for .080"/2.03 mm Pitch Pulleys....................2-23
XL
for 1/5"/5.08 mm Pitch Pulleys......................2-61
PULLEY STOCK, TIMING
40 D.P.
.082"/2.07 mm Pitch, Aluminum....................2-40
GT2
.079"/2 mm Pitch, Aluminum.......................2-165
.197"/5 mm Pitch, Steel................................2-198
HTD
.118"/3 mm Pitch, Steel................................2-119
.197"/5 mm Pitch, Steel................................2-141
L, Aluminum and Steel
3/8"/9.53 mm Pitch........................................2-104
A-18
PULLEY STOCK, TIMING (CONTINUED)

MXL
.080"/2.03 mm Pitch, Aluminum....................2-24
XL
1/5"/5.08 mm Pitch
Aluminum...................................................2-62
Steel............................................................2-63
PULLEYS
For Flat Belts
Polycarbonate with Aluminum Insert............2-267
Grooved, Round Belts, Acetal, Brass Insert
for 1/16" Diameter........................................2-264
for 3/32" and 1/8" Diameter.........................2-265
PULLEYS, GROOVED, IDLER
See Grooved Idler Pulleys
PULLEYS, GROOVED, PRECISION
Round Belt, Stainless Steel, for 1/8" Dia.......2-263
PULLEYS, IDLER
See Idler Pulleys, Also See Grooved Idler
Pulleys and V-Belt Pulleys
PULLEYS, SYNCHROMESH..................................2-251
PULLEYS, TIMING BELT, See Timing Belt Pulleys
PULLEYS, V-BELT, See V-Belt Pulleys
R
RACKS COMMERCIAL
Also See Molded Racks Commercial
RACKS
Commercial, Rectangular, 14-1/2 P.A.
24, 32 and 48 Pitch.......................................1-197
Precision, Rectangular, 20 P.A.
1/20, 1/10, 16, 20, 24, 32, 48, 64, 72,
80 and 96 Pitch.............................................1-196
24, 32, 48, 64, 72, 80, 96 and 120 Pitch.......1-195
24, 32, 48, 64, 72, 96 and 120 Pitch.............1-194
Precision, Round, 20 P.A.
24, 32, 48, 64, 72, 96 and 120 Pitch.............1-194
RAIL SUPPORTS, FOR ROUND SHAFTING..........3-15
RATCHETS AND PAWLS, BRASS..........................15-6
RECTANGULAR BUMPERS
Rubber, Steel Base to 4700 lbf..........................8-77
RECTANGULAR MOUNTINGS
Rubber, Steel Base to 1475 lbf..........................8-75
REELS, SPRING-POWERED
Arbor-Mounted..................................................15-44
Cable Attachment.............................................15-41
For Point-Of-Purchase Displays.....................15-40
Spir'ator
Base-Mounted, Closed Case.....................15-42
Base-Mounted, Open Case........................15-43
Bracket-Mounted........................................15-48
RETAINING RINGS
Bearing, Internal Push-In Design...................10-62
External
..............................................................10-64
External
Bowed............................................................10-63
ALPHABETICAL INDEX
RETAINING RINGS (CONTINUED)

External (Continued)
E-Rings...........................................................10-69
Grooveless....................................................10-63
Snap-On Design...........................................10-68
Internal...............................................................10-67
RIGHT ANGLE DRIVES
Bevel Gearboxes, 1:1 Ratio
2 to 7 ozf in. Torque........................................12-3
2 to 19 lbf in. Torque.......................................12-5
4 to 7 ozf in. Torque, Low Backlash.............12-3
5 to 70 ozf in. Torque......................................12-4
6 to 32 lbf in. Torque.......................................12-6
15 to 19 lbf in. Torque, Low Backlash.........12-5
25 to 32 lbf in. Torque, Low Backlash.........12-6
40 to 70 ozf in. Torque, Low Backlash.........12-4
Heavy-Duty, Steel Helical Gears....................12-19
Hollow-Shaft Drive, Steel Helical Gears.......12-24
Key Drive, Steel Helical Gears........................12-26
Light-Duty
Panel Mounted, Steel Helical Gears........12-20
Steel Helical Gears......................................12-18
Miniature, Lightweight, Steel Helical Gears
Base Mounted..............................................12-21
Panel Mounted.............................................12-22
Mini-Shaft Drive, Steel Helical Gears...........12-23
Pictorial Guide.....................................................12-0
Size 11
Bevel Gear Drives, Brass Gears................12-12
Molded Nylon Gears.....................................12-9
Steel Gears.....................................................12-8
Worm Gear Drives
Bronze/Steel Gears................................12-12
Size 13
Worm Gear Drives, Precision, Style "E"....12-13
Steel Gears.....................................................12-7
Size 18
Size 25
Size 26
Commercial Grade
Bronze Driven Gear.....................................12-10
Size 44
Commercial Grade
Bronze Driven Gear.....................................12-11
Speed Reducers, Light-Duty,
Steel Helical Gears
Base Mounted..............................................12-16
Panel Mounted.............................................12-17
RIGHT ANGLE PLANETARY GEARHEADS
RIGHT ANGLE SPUR GEARHEADS
See Spur Gearheads
RIGID COUPLINGS
Commercial, Set Screw Type, Steel................6-79
Torque Tube, Acetal Tube,
Aluminum Split Type Hubs.................................6-78
RING MOUNTINGS
Rubber, to 20 lbf...................................................8-15
RINGS, TOLERANCE
External.................................................................4-28
Internal.................................................................4-26
ROD END BEARINGS
L280 Polymer Ball, Thermoplastic Body
Female...........................................................5-109
Male...............................................................5-108
RODS, ALUMINUM, STEEL & STAINLESS STEEL
See Shafting
RODS, PRECISION GROUND, See Shafting
RODS, THREADED
Metal...................................................................10-16
Plastic.................................................................10-17
ROLL PINS
Stainless Steel...................................................10-73
Steel....................................................................10-74
ROLLER CHAIN SPROCKETS
.1227" Pitch
Subminiature, Acetal...................................2-219
.1475" Pitch, Miniature
Nylatron GS...................................................2-222
Stainless Steel..............................................2-221
1/2" Pitch
Acetal and Nylatron GS..............................2-232
1/4" Pitch
Acetal.............................................................2-230
Hubless, Steel...............................................2-227
Nylon..............................................................2-229
Stainless Steel..............................................2-225
Steel...............................................................2-226
3/8" Pitch
Nylatron GS...................................................2-232
ROLLER CHAINS AND SPROCKETS
Locator Chart.........................................................2-4
ROLLER CHAINS
.1227" Pitch
Subminiature, Acetal...................................2-218
Nylatron GS...................................................2-222
Stainless Steel..............................................2-220
1/4" Pitch
Standard Duty and Heavy-Duty.................2-223
Connecting Link, Steel................................2-223
Heavy-Duty, Connecting Link, Steel.........2-223
Polyvinylidene..............................................2-224
1/4", 3/8" and 1/2" Pitch
Acetal, Nylatron GS & Polypropylene......2-224
3/8" Pitch
Connecting Link, Steel................................2-231
Stainless Steel..............................................2-231
A-19
R
T
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
A
ALPHABETICAL INDEX
R
T
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
A
ROLLER CLUTCHES
Needle Roller Pressbearing
Unidirectional Drives, Self-Clinching.......13-19
Self-Clinching, Installation Details............13-20
Standard Roller...................................................5-87
Unidirectional Drives
with Bearing Support..................................13-18
without Bearing Support............................13-17
With Bearing Support........................................5-90
ROLLER, IDLER
Polyether Roller.................................................15-32
ROLLERS IN CAM FOLLOWERS
Technical Notes................................................15-24
ROLLERS
Cast Nylon Surface, Ball Bearings................15-25
Feed Rollers, Urethane
without Bearings..........................................15-34
without Bearings, Set Screw Hub.............15-33
Neoprene
Polymer Bearings........................................15-28
Sintered Bronze Bearings..........................15-29
Urethane Surface, Ball Bearings...................15-26
Urethane
Polymer Bearings........................................15-27
Sintered Bronze Bearings..........................15-29
ROUND ENDLESS BELTS, See Belts, O-Ring
ROUND SPACERS..................................................10-94
ROUND STAND-OFFS, THREADED
1/4" O.D................................................................10-98
5/32" O.D..............................................................10-97
Rounthane Belts
Connectors, Aluminum.....................................2-259
Polyurethane, 3/16", 1/4" and 5/16" Dia...........2-259
RUBBER BUMPERS FOR SHAFT COLLARS.........4-15
RUBBER MOUNTINGS SELECTION PROCEDURE
Technical Notes..................................................8-85
RUBBER MOUNTS, See Vibration Mounts
S
SCALE, STEEL.........................................................15-52
SCREW INSULATORS, MOLDED.........................10-44
SCREWDRIVERS
Instrument Screwdrivers, Assorted Set.......15-52
SCREWS, CAP, See Cap Screws
SCREWS, MACHINE, See Machine Screws
SCREWS, SET, See Set Screws
SCREWS, SHOULDER, See Shoulder Screws
SCREWS, THUMB, See Thumb Screws
SELECTION GUIDE
Bu-ord Gearheads and Speed Reducers........11-9
Disk Type Coupling.............................................6-46
Dual Output Planetary Gearheads.................11-75
Helical Couplings................................................6-24
NEMA Inline Planetary Gearheads................11-45
A-20
SELECTION GUIDE (CONTINUED)

NEMA Size Right Angle Planetary
Gearheads..........................................................11-75
Pressbearings.....................................................5-66
Slit Type Flexible Couplings...............................6-35
SELF CLINCHING NEEDLE ROLLER
PRESSBEARINGS
Installation Details..............................................5-83
SELF-CLINCHING PRESSBEARINGS
Installation Details
Nonaligning, PTFE Bronze............................5-71
PTFE Acetal.....................................................5-73
Self-Aligning, Sintered & PTFE Bronze......5-69
SENSOR
Ultrasonic, For Clutches and Brakes.............13-53
SERVO BRAKES, ELECTROMAGNETIC
Power-Off Type..................................................13-29
Power-On Type..................................................13-31
SET SCREW
Slotted Head
Flat Point, Nylon...........................................10-31
Nylon Tipped, Stainless Steel....................10-31
Socket Head
Cup Point, Stainless Steel..........................10-28
Cup Point, Steel............................................10-29
Half-Dog Point, Steel...................................10-30
Nylon Tipped, Stainless Steel....................10-31
SHAFT COLLARS
Commercial Set Screw Type.............................4-18
Fairloc Type, with Integral Bearing Shim
Spacers
Brass and Stainless Steel............................4-16
FastLock, Stainless Steel...................................4-14
Grip Fast
Low Cost, Steel and Plastic..........................4-13
Stainless Steel................................................4-12
Precision Set Screw Type,
with Integral Bearing Shim Spacers...............4-17
Precision, Set Screw Type................................4-19
Stroke Adjusting..................................................4-15
SHAFT COUPLINGS, Also See Couplings
SHAFT COUPLINGS
Precision, Set Screw Type................................6-77
Rigid, Fairloc Hub..............................................6-76
SHAFT EXTENDERS, STAINLESS STEEL
Commercial Set Screw Type.............................4-21
Fairloc Type........................................................4-20
Precision, Clamp Type........................................4-19
SHAFTING
Drawn, 12L14 Cold Rolled Steel........................3-14
DryLin S Aluminum...........................................3-13
Hardened, Precision Ground
416 Stainless Steel, Tempered.......................3-3
420 Stainless Steel, Case Hardened.............3-6
C 1060 Steel, Case Hardened.........................3-5
ALPHABETICAL INDEX
SHAFTING (CONTINUED)
Hardened, Steel and Stainless Steel
Case Hardened, Predrilled or Plain.................3-15
Rail Supports.......................................................3-15
Ultraprecision, 303 Stainless Steel....................3-2
Undersized
303 Stainless Steel...........................................3-8
Nominal and Oversized
303 Stainless Steel...........................................3-7
SHAFTLOC SLEEVE ASSEMBLIES
For Pulleys, HTD
.118"/3 mm Pitch...........................................2-133
.197"/5 mm Pitch...........................................2-157
For Pulleys, L
3/8"/9.53 mm Pitch........................................2-111
For Pulleys, XL
1/5"/5.08 mm Pitch..........................................2-97
Technical Notes................................................2-132
SHAFTLOC SLEEVES, STAINLESS STEEL
Double-Ended........................................................4-5
Single-Ended.........................................................4-6
SHAFTLOC TIMING BELT PULLEYS
HTD
.118"/3 mm Pitch...........................................2-133
.197"/5 mm Pitch...........................................2-157
L
3/8"/9.53 mm Pitch........................................2-111
XL
1/5"/5.08 mm Pitch..........................................2-97
SHAFTLOC, STAINLESS STEEL
A-Type.....................................................................4-8
M-Type....................................................................4-7
Technical Notes....................................................4-3
SHAFTLOCKS
Potentiometer, Nut Type, Brass........................4-18
SHAFT-MOUNTED CLUTCHES, ELECTROMAGNETIC
For In-Line Loads..............................................13-36
For Parallel Loads.............................................13-35
SHAFT REDUCERS
Commercial Set Screw Type
Stainless Steel.....................................................4-21
Fairloc Type, Stainless Steel...........................4-20
SHAFT SPACERS
Arbor, Steel........................................................10-49
Arbor, Steel, with Keyway...............................10-48
Laminated Brass Shim.....................................10-47
Outer Race Shim, Stainless Steel..................10-47
Standard, Stainless Steel................................10-45
Thread and Bolt Size Shims............................10-50
SHIM SPACERS
See Shim Stock, Washers, and Shaft Spacers
SHIM STOCK SETS, ALUMINUM........................15-50
SHIM STOCK
Brass, Steel and Stainless Steel....................15-49
Plastic.................................................................15-51
SHIMS, Also See Shim Stock

SHOULDER SCREWS
Shallow Slotted Head, Stainless Steel..........10-11
Commercial, Stainless Steel
Slotted Head.................................................10-10
Socket Head...................................................10-8
Slotted Head...................................................10-9
Socket Head...................................................10-7
SILICONE GEL DAMPERS APPLICATION
Technical Notes....................................................8-8
SILICONE GEL
Chips.and Tape....................................................8-10
Shock Absorbing Foam Sheets........................8-11
Shock Absorbing Sheets.....................................8-9
Vibration Dampers, Flanged................................8-6
SILICONE VS. RUBBER IN MOUNTS
Technical Notes....................................................8-5
SINTERED BRONZE BAR STOCK
Oil-Impregnated
Cored................................................................5-48
Solid.................................................................5-47
Pillow Blocks
Flanged..........................................................5-106
Miniature.......................................................5-100
See Sleeve Bearings
SLEEVE BEARINGS
Also See Frelon Lined Linear Bearings
Also See Linear Bearings
SLEEVE BEARINGS
Frelon Lined
Flanged............................................................5-26
Plain.................................................................5-25
Nonmetallic
Acetron and Ertalyte TX............................5-50
General Purpose G300 Polymer................5-52
High Temperature T500 Polymer...............5-56
Industrial Grade M250 Polymer.................5-60
Sintered Bronze
"B" Series, Plain and Flanged.......................5-33
"S" Series, Flanged.........................................5-44
"S" Series, Plain..............................................5-38
Long "L" Series, Plain.....................................5-33
Standard "F" Series, Flanged........................5-37
Standard "P" Series, Plain.............................5-35
Thick Walled "G" Series
Plain and Flanged..........................................5-34
Ultraprecision, Flanged.................................5-32
Ultraprecision, Plain......................................5-31
SLEEVE STOCK, FOR COUPLINGS.........................6-71
SLEEVE TYPE
Couplings, Polyethylene Sleeve.......................6-71
A-21
R
T
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
A
ALPHABETICAL INDEX
R
T
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
A
SLEEVES
Hex Hole...............................................................4-32
Square Hole.........................................................4-33
SLIP CLUTCHES
Hysteresis..........................................................13-23
In-Line
Multiplate Design...........................................13-3
Precision, Pin Type & Clamp Type............13-44
Standard Series, Pin Type and
Clamp Type....................................................13-46
.130 lbf in. Torque.........................................13-14
Nonelectric, 25 lbf in. Torque.....................13-15
Nonelectric, 70 lbf in. Torque.....................13-16
Magnetic Particle.............................................13-48
Mechanical, Technical Notes.........................13-39
Shaft-To-Shaft Mount, Coupling Type with
Optional Actuating Pin.....................................13-42
Spring-Wrapped.................................................13-7
Through Shaft Mount, with Bushing and
Optional Actuating Pin.....................................13-40
SLIP COUPLINGS
Spring-Wrapped.................................................13-9
Technical Notes.............................................13-8
SLIT TYPE COUPLINGS
MSC Series, Split Hub Type
Aluminum........................................................6-37
Stainless Steel................................................6-36
MSK Series, with Keyway
Aluminum........................................................6-41
Stainless Steel................................................6-40
MST Series, Set Screw Type
Aluminum........................................................6-39
Stainless Steel................................................6-38
MSX Series
Plastic
Set Screw Type..............................................6-45
Split Hub Type.................................................6-44
SLIT TYPE FLEXIBLE COUPLING
Selection Guide...................................................6-35
SPACERS
Hexagonal and Square, Threaded.................10-96
Round..................................................................10-94
Round, Threaded...............................................10-95
SPACERS, SHAFT, See Shaft Spacers
SPEED REDUCERS, Also See Right Angle Drives
SPEED REDUCERS
Bu-ord Sizes
Selection Chart...............................................11-9
Size 11
OffSet Shaft..............................................11-24
Standard-Duty.........................................11-23
A-22
SPEED REDUCERS (CONTINUED)

Bu-ord Sizes (Continued)
Size 11
Zero Backlash.........................................11-25
Size 15
Double-End..............................................11-26
Single-End................................................11-28
Size 18
Double-End..............................................11-30
Single-End................................................11-31
Technical Notes.............................................11-6
Right Angle Drives, Light-Duty
Steel Helical Gears
Base Mounted..............................................12-16
Panel Mounted.............................................12-17
Worm Gear Drives, Precision, Style "E"
Size 13............................................................12-13
Size 18............................................................12-14
Size 25............................................................12-15
Commercial Grade, Bronze Driven Gear
Size 26............................................................12-10
Size 44............................................................12-11
Zero Backlash, Technical Notes......................11-8
SPIDER TYPE, COUPLINGS....................................6-70
SPIROL PINS
Stainless Steel...................................................10-75
Steel....................................................................10-76
SPLINE TYPE COUPLINGS
Heavy-Duty, Hytrel, Spline.................................6-55
Polyurethane Spline...........................................6-54
SPLINED BUSHINGS, INTERNAL........................1-255
SPLINES, EXTERNAL.............................................1-255
SPLIT LOCK WASHERS FOR FOOT MOUNTS....16-58
SPRING AND PAD MOUNTS
Stainless Steel Aluminum Base and Caps
to 4.4 lbf................................................................8-55
SPRING COUPLINGS
Shock Absorbing, Stainless Steel....................6-74
SPRING MOTOR ASSEMBLIES, NEG'ATOR
Acetal Drums.....................................................15-47
Nylon Drums......................................................15-46
SPRING MOTORS, NEG'ATOR...........................15-39
SPRING MOUNTINGS
Damped
Selection Criteria...........................................8-69
Steel Spring and Stainless Steel Mesh
to 200 lbf.....................................................8-67
to 750 lbf.....................................................8-68
to 1235 lbf...................................................8-70
to 2469 lbf...................................................8-71
Elliptic Leaf
Nato Approved "X" & "XM" Type..................8-63
Nato Approved Lightweight "X" Type..........8-65
Technical Notes.............................................8-64
Test Data.........................................................8-66
ALPHABETICAL INDEX
SPRING MOUNTINGS (CONTINUED)

Spring Suspension
Pedestal...........................................................8-60
Single Hole......................................................8-61
Square Plate...................................................8-59
SPRING POSTS......................................................10-88
SPRING WASHERS, See Washers
Arbor-Mounted..................................................15-44
Cable Attachment.............................................15-41
For Point-Of-Purchase Displays.....................15-40
Spir'ator, Base-Mounted
Closed Case..................................................15-42
Open Case.....................................................15-43
Spir'ator, Bracket-Mounted..........................15-48
Square Stud for
A 3Z53... Series.............................................15-45
A 3Z55... Series.............................................15-44
SPRINGS FOR ANTI-BACKLASH GEAR..............10-93
SPRINGS
Compression......................................................10-91
Constant Force, 2500 Cycle Life......................15-36
Extension............................................................10-89
Torsion................................................................10-93
SPRING-WRAPPED CLUTCHES
Electromagnetic
High-Torque, Unidirectional Input.............13-27
Metric Bore..............................................13-27
Unidirectional Input.....................................13-26
Metric Bore..............................................13-26
SPRING-WRAPPED SLIP CLUTCHES...................13-7
Technical Notes..................................................13-5
SPRING-WRAPPED SLIP COUPLINGS.................13-9
Technical Notes..................................................13-8
SPROCKETS
Ladder Chain
.167" Pitch Size 21, .065" Face, Acetal
Brass Insert.............................................2-233
No Insert...................................................2-234
.185" Pitch Size 19, .087" Face
Brass.........................................................2-236
Steel..........................................................2-235
Brass Insert.............................................2-237
No Insert...................................................2-238
Brass Insert.............................................2-241
No Insert...................................................2-242
Brass.........................................................2-240
Steel..........................................................2-239
Acetal, Brass Insert................................2-245
SPROCKETS (CONTINUED)
Ladder Chain (Continued)
Acetal, No Insert.....................................2-246
Steel..........................................................2-244
Size 17, Brass..........................................2-243
Posi-Drives
Clamp Type Hub
.1475" C.P., For Twin Core Belts.............2-210
20 Pitch, For Single Core Belts.............2-213
20 Pitch, For Twin Core Belts................2-216
Pin Type Hub
.1475" C.P., For Twin Core Belts.............2-209
20 Pitch, For Twin Core Belts................2-215
Roller Chain
.1227" Pitch, Acetal......................................2-219
Nylatron GS..............................................2-222
Stainless Steel.........................................2-221
1/2" Pitch
Acetal and Nylatron GS.........................2-232
1/4" Pitch
Acetal........................................................2-230
Hubless, Steel..........................................2-227
Nylon.........................................................2-229
Stainless Steel.........................................2-225
Steel..........................................................2-226
3/8" Pitch, Nylatron GS................................2-232
SPUR GEAR STOCK, 14-1/2 AND 20 P.A.
20 Pitch ..............................................................1-187
24 Pitch, and 32 Pitch.......................................1-185
44 Pitch and 48 Pitch........................................1-184
64 Pitch ..............................................................1-183
SPUR GEARHEADS
NEMA Size 23....................................................11-72
NEMA Size 34....................................................11-73
NEMA Size 42....................................................11-74
NEMA Size Mounting Instructions................11-44
Right Angle
Dual-Output
NEMA Size 23........................................11-118
NEMA Size 34........................................11-119
NEMA Size 42........................................11-120
NEMA Size 23...............................................11-98
NEMA Size 34...............................................11-99
NEMA Size 42.............................................11-100
SPUR GEARS, COMMERCIAL
14-1/2 P.A.
24 Pitch, 1/4" Face
Brass..............................................................1-133
Steel...............................................................1-132
A-23
R
T
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
A
ALPHABETICAL INDEX
R
T
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
A
SPUR GEARS, COMMERCIAL (CONTINUED)

32 Pitch, 3/16" Face
Brass..............................................................1-108
Steel...............................................................1-109
48 Pitch, 1/8" Face, Brass...................................1-87
SPUR GEARS, COMMERCIAL
Also See Hubless Spur Gears Commercial
Also See Hubless Spur Gears Commercial or
Molded Spur Gears Commercial
Also See Hubless Spur Gears Commercial or
Nonmetallic Spur Gears, Machined Commercial
Also See Nonmetallic Spur Gears,
Machined Commercial
Also See Stamped Spur Gears
SPUR GEARS, PRECISION
24 Pitch, 20 P.A., Aluminum & Stainless Steel
1/8" Face........................................................1-129
3/16" Face......................................................1-130
1/8" Face........................................................1-105
3/16" Face......................................................1-106
1/8" Face..........................................................1-77
3/16" Face........................................................1-81
1/8" Face..........................................................1-57
3/16" Face........................................................1-62
1/8" Face..........................................................1-43
3/16" Face........................................................1-46
1/8" Face..........................................................1-39
1/8" Face..........................................................1-33
1/16" Face........................................................1-31
3/32" Face........................................................1-32
1/16" Face........................................................1-28
3/32" Face........................................................1-29
SPUR GEARS, PRECISION
Also See Clamp Type Spur Gears, Precision
Also See Differential End Gears
Also See Fairloc Hub Spur Gears, Precision
Also See Hardened Spur Gears, Precision
Also See Hubless Spur Gears, Precision
Also See Nonmetallic Spur Gears
Machined, Precision
Also See Pin Type Spur Gears, Precision
Also See Spur Gears Precision, Anti-Backlash
Also See Spur Gears Precision, Mini-Lash
Anti-Backlash, 20 P.A.
Clamp Type and Pin Type
24 Pitch, 3/16" Face.................................1-166
32 Pitch, 3/16" Face.................................1-165
48 Pitch, .104" Face.................................1-163
64 Pitch, .104" Face.................................1-160
A-24
SPUR GEARS, PRECISION (CONTINUED)

Anti-Backlash, 20 P.A. (Continued)
Clamp Type and Pin Type
72 Pitch, .104" Face.................................1-157
80 Pitch, .104" Face.................................1-154
96 Pitch, .104" Face.................................1-152
120 Pitch, .104" Face...............................1-149
Fairloc Hub, .104" Face
48 Pitch.....................................................1-162
64 Pitch.....................................................1-159
72 Pitch.....................................................1-156
96 Pitch.....................................................1-151
Mini-Lash, 20 P.A.
Clamp Type and Pin Type, .104" Face
64 Pitch.....................................................1-176
72 Pitch.....................................................1-174
80 Pitch.....................................................1-172
96 Pitch.....................................................1-170
120 Pitch...................................................1-168
Fairloc Hub, .104" Face
64 Pitch.....................................................1-175
72 Pitch.....................................................1-173
80 Pitch.....................................................1-171
96 Pitch.....................................................1-169
120 Pitch...................................................1-167
SPUR GEARS, Also See Nonmetallic Spur Gears
SPUR GEARS, MOLDED COMMERCIAL
Also See Molded Spur Gears Commercial
SPUR GEARS, MOLDED PRECISION
Also See Molded Spur Gears Precision
SQUARE HOLE BUSHINGS.....................................4-32
SQUARE HOLE SLEEVES.........................................4-33
SQUARE MACHINE KEYS, STEEL..........................4-29
SQUARE MOUNTINGS, RUBBER
to 13.8 lbf..............................................................8-12
to 15.4 lbf..............................................................8-13
SQUARE SPACERS
Threaded, Anodized Aluminum......................10-96
SQUARE STOCK.......................................................4-31
SQUARE STUD FOR A 3Z53... SERIES
SPRING-POWERED REELS...................................15-45
STAMPED SPUR GEARS
32 Pitch, 14-1/2 P.A., 1/16" & 1/32" Face.......1-123
48 Pitch, 14-1/2 P.A., 1/16" & 1/32" Face.........1-99
48 Pitch, 20 P.A., 1/32" Face............................1-100
64 Pitch, 20 P.A., 1/32" Face..............................1-73
STAND-OFFS, THREADED
Hexagonal
Brass............................................................10-100
Stainless Steel..............................................10-99
Round
1/4 O.D. ..........................................................10-98
5/32 O.D. ........................................................10-97
STEEL SCALE..........................................................15-52
STEEL TRACKS, See Tracks, "V" Guide
ALPHABETICAL INDEX
STEPPER GEARMOTORS
NEMA Size 17......................................................14-2
NEMA Size 23......................................................14-3
STEPPER MOTORS, HYBRID
NEMA Size 11......................................................14-7
NEMA Size 14......................................................14-9
NEMA Size 17....................................................14-11
NEMA Size 23, 160V D.C..................................14-15
NEMA Size 23, 80V D.C....................................14-13
NEMA Size 34, Heavy Duty..............................14-19
NEMA Size 34, Standard Duty........................14-17
NEMA Size 42....................................................14-21
STOCK
Hex........................................................................4-31
Rectangular.........................................................4-30
Sleeve For Couplings..........................................6-71
Square..................................................................4-31
STOCK, TIMING BELT, See Timing Belt Stock
STOCK, TIMING PULLEY
See Timing Pulley Stock
STUDS, SQUARE FOR A 3Z55... SERIES
SPRING-POWERED REELS...................................15-44
SUBMINIATURE PLASTIC CHAINS
.1227" Pitch, Acetal...........................................2-218
SYNCHROMESH DRIVES
Cable Attachments
Eyes and Plugs.............................................2-253
Loop Sleeves and Thimbles.......................2-252
Cable Pulleys.....................................................2-251
Cables, .120", .150", 1/5" & 1/4" Pitch...............2-250
Crimping Tools...................................................2-256
Locator Chart.........................................................2-4
Selection Chart..................................................2-249
Technical Notes................................................2-248
T
T500 POLYMER BEARINGS
Technical Notes..................................................5-59
TAPER PINS
Stainless Steel...................................................10-79
Steel....................................................................10-80
TECHNICAL NOTES
Advantages Of Silicone vs. Rubber,
In Mounts...............................................................8-5
Application Of Silicone Gel Dampers................8-8
Bu-ord Gearheads and Speed Reducers........11-6
Cam Followers...................................................15-24
CG Planetary Gearheads.................................11-51
Clutch & Brake Inertia & Torque Values.......13-24
Clutches, Application Examples.....................13-34
Damped Spring Mountings Selection
Criteria..................................................................8-69
Design a Pulley Drives System...........................2-5
Electromagnetic Spring-Wrapped
Clutches..............................................................13-25
TECHNICAL NOTES (CONTINUED)

Elliptic Leaf Spring Mounting
Test Data.........................................................8-66
Nato Approved "X" and "XM" Type...............8-64
Fairloc Hub Timing Belt Pulleys .....................2-75
Fairloc Integral Fastener...................................2-0
Finger-Flex Mountings.......................................8-42
Flexi-Hinges.......................................................15-14
Frelon Lined Linear Bearings..........................5-19
G300 Polymer Bearings....................................5-55
Gearhead, Inertia Conversion Table................14-4
Grip Fast.............................................................4-11
Integral Clamp Type.........................................6-8
Set Screw Type and Clamp Type.................6-10
Hysteresis Brakes and Clutches....................13-21
Inertia Matching Example.............................11-101
In-Line Slip Clutches........................................13-02
Application Examples....................................13-4
J Polymer Linear Bearings..............................5-30
Load Deflection For Base Mounts,
Durulene and Neoprene..................................8-79
M250 Polymer Bearings...................................5-65
Application Examples..................................13-10
Operating Curves.........................................13-13
Magnetic Particle Clutches & Brakes...........13-47
Modular Bellows Couplings..............................6-12
Needle Roller Clutch Pressbearings,
Self-Clinching, Installation Details...................5-89
Non-metallic Bearings.......................................5-49
Pillow Block and Rod End Polymer................5-110
Planetary Gearheads.......................................11-42
Power-Off Servo Brakes..................................13-28
Precision Bellows Couplings............................6-17
PRX and RTX Planetary Gearheads...............11-46
Rubber Mountings Selection Precedure........8-85
Self Clinching Needle Roller Pressbearings,
Self Clinching Pressbearings, Nonaligning,
PTFE Bronze Installation Details......................5-71
Self Clinching Pressbearings, PTFE Acetal,
Self-Clinching Pressbearings, Self-Aligning,
Sintered and PTFE Bronze
Shaftloc................................................................4-3
Sleeve Assemblies, For Pulleys.................2-132
Slip Clutches, Mechanical..............................13-39
Spring-Wrapped Slip Clutches.........................13-5
Spring-Wrapped Slip Couplings.......................13-8
Stepper Motor Specifications..........................14-5
Stepper Motor Wiring Diagrams....................14-22
T500 Polymer Bearings....................................5-59
Trumotion Timing Belts....................................2-98
A-25
R
T
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
A
ALPHABETICAL INDEX
R
T
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
A
TECHNICAL NOTES (CONTINUED)

Vibration Transmissibility Charts......................8-82
Zero-Backlash Gearheads and
Speed Reducers..................................................11-8
TELESCOPING MINIATURE BALL SPLINES........4-22
TENSION TESTERS, BELT.......................................2-14
THREAD SIZE SHIMS............................................10-50
THREADED RODS
Metal...................................................................10-16
Nylon and PVC...................................................10-17
THREADED SPACERS
Hexagonal and Square....................................10-96
Round..................................................................10-95
THREADED STAND-OFFS
Hexagonal..........................................................10-99
Round..................................................................10-97
THRUST BEARINGS
All Steel Banded Assembly...............................5-91
Nylon Retainer
Stainless Steel................................................5-92
Steel Balls.......................................................5-93
THRUST WASHERS
General Purpose, G300 Polymer.....................5-94
High-Temperature, T500 Polymer...................5-95
Industrial Grade, M250 Polymer.....................5-96
THUMB SCREW KNOBS
Assorted Kits, Acetal........................................10-36
Unassembled, Round, Tee, Rosette,
"L" Knobs, Acetal...............................................10-35
THUMB SCREWS
Assembled
"L" and Tee Knobs, Acetal...........................10-34
Knurled Knob, Acetal..................................10-33
Captive, Half-Hard Brass.................................10-39
Knurled Head
Brass..............................................................10-37
Nylon..............................................................10-38
TIMING BELT CLAMP KITS
Locator Chart.........................................................2-2
GT2, Aluminum
.079"/2 and .118"/3 mm Pitch.........................2-12
.197"/5 and .315"/8 mm Pitch.........................2-13
GT2, Polycarbonate
.079"/2, .118"/3 and .197"/5 mm Pitch..............2-9
HTD, Aluminum
.197"/5 and .315"/8 mm Pitch.........................2-11
HTD, Polycarbonate
.118"/3 and .197"/5 mm Pitch...........................2-9
L, Aluminum
3/8"/9.53 mm Pitch..........................................2-10
MXL, Polycarbonate
.080"/2.03 mm Pitch..........................................2-9
XL, Aluminum
1/5"/5.08 mm Pitch..........................................2-10
XL, Polycarbonate
1/5"/5.08 mm Pitch............................................2-9
A-26
TIMING BELT PULLEYS

40 D.P., .082"/2.07 mm Pitch
Double Flange
Acetal, Brass Insert, for 1/4" Belts.........2-48
Acetal, No Insert, for 1/4" Belts..............2-52
Aluminum
for 3/16" Belts........................................2-42
for 5/16" Belts........................................2-44
No Flange, Aluminum
for 3/16" Belts.............................................2-46
for 5/16" Belts.............................................2-47
Single Flange, Acetal
Brass Insert, for 1/4" Belts.......................2-50
No Insert, for 1/4" Belts............................2-53
GT2, .079"/2 mm Pitch
Double Flange
Aluminum, for 3 mm Belts......................2-168
Fairloc Hub, for 6 mm Belts............2-167
Polycarbonate, Brass Insert
for 6 mm Belts..........................................2-171
No Insert, for 6 mm Belts..................2-172
No and Double Flange, Aluminum
for 6 mm Belts..........................................2-169
for 9 mm Belts..........................................2-170
No Flange
Aluminum, Fairloc Hub
for 6 mm Belts..........................................2-167
Single Flange
Polycarbonate, No Insert
for 6 mm Belts..........................................2-173
Double Flange
Polycarbonate, Aluminum Insert
for 9 mm Belts..........................................2-187
No and Double Flange
for 9 mm Belts.....................................2-186
No and Single Flange
for 9 mm Belts..........................................2-189
Single Flange
for 9 mm Belts..........................................2-191
Double Flange
for 15 mm Belts...................................2-202
No Flange
for 15 mm Belts...................................2-203
HTD, .118"/3 mm Pitch
Double Flange
for 9 mm Belts.....................................2-124
ALPHABETICAL INDEX
TIMING BELT PULLEYS (CONTINUED)

Double Flange
for 9 mm Belts..........................................2-126
for 9 mm Belts..........................................2-131
No Flange
for 9 mm Belts.....................................2-125
for 9 mm Belts..........................................2-129
Shaftloc, Nylon, Steel Insert
for 9 mm Belts..........................................2-133
Single Flange
for 9 mm Belts..........................................2-128
Double Flange
for 15 mm Belts...................................2-145
Nylon, Aluminum Insert
for 15 mm Belts........................................2-155
for 9 mm Belts..........................................2-149
No Flange
for 15 mm Belts...................................2-146
Polycarbonate, Aluminum Hub
for 9 mm Belts..........................................2-148
for 15 mm Belts........................................2-157
Single Flange
for 15 mm Belts........................................2-156
for 9 mm Belts..........................................2-151
Double Flange
for 20 mm Belts........................................2-158
Single Flange
for 20 mm Belts........................................2-159
L, 3/8"/9.53 mm Pitch
Double Flange
Aluminum, for 1/2" Belts.........................2-105
for 1/2" Belts.............................................2-109

L, 3/8"/9.53 mm Pitch (Continued)
Double Flange
Steel, for 1/2" Belts.................................2-106
for 1/2" Belts.............................................2-107
for 3/4" Belts.............................................2-108
for 1/2" Belts.............................................2-111
Single Flange
for 1/2" Belts.............................................2-110
MXL, .080"/2.03 mm Pitch
Double Flange
Aluminum, for 1/4" Belts...........................2-29
for 1/8" Belts..........................................2-28
Fairloc Hub, for 1/4" Belts....................2-27
for 1/4" Belts...............................................2-31
Brass Insert, for 1/4" Belts..................2-32
No Insert, for 1/4" Belts.......................2-33
No and Double Flange
No Flange
Fairloc Hub, for 1/4" Belts....................2-27
Hubless, Polycarbonate
for 1/4" Belts...............................................2-34
Single Flange
for 1/4" Belts...............................................2-31
Brass Insert, for 1/4" Belts..................2-32
XL, 1/5"/5.08 mm Pitch
Double Flange
For 3/8" Belts.........................................2-66
Fairloc Hub, Polycarbonate
for 3/8" Belts...............................................2-76
Hubless, Aluminum, for 3/8" Belts..........2-68
Steel, for 3/8" Belts...............................2-74
Min. Bore, Aluminum, for 3/8" Belts.......2-71
Nylon, No Insert, for 3/8" Belts...............2-94
for 3/8" Belts...............................................2-78
Aluminum Insert, for 3/8" Belts...........2-80
with Set Screws, for 3/8" Belts...........2-87
for 3/8" Belts...............................................2-97
Steel, for 3/8" Belts...................................2-72
A-27
R
T
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
A
ALPHABETICAL INDEX
R
T
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
A

XL, 1/5"/5.08 mm Pitch (Continued)
for 3/8" Belts..........................................2-79
Fairloc Hub, for 3/8" Belts..................2-77
with Set Screws, for 3/8" Belts...........2-88
No Flange
Min. Bore, for 3/8" Belts......................2-71
for 3/8" Belts...............................................2-86
Single Flange
for 3/8" Belts...............................................2-83
for 3/8" Belts...............................................2-97
TIMING BELT STOCK
GT2, Neoprene
.079"/2, .118"/3 and .197"/5 mm Pitch..............2-8
HTD, Neoprene
.118"/3 and .197"/5 mm Pitch...........................2-7
L
Neoprene 3/8"/9.53 mm Pitch.........................2-6
Polyurethane, 3/8"/9.53 mm Pitch..................2-6
MXL, Neoprene
.080"/2.03 mm Pitch..........................................2-6
T, Polyurethane
.197"/5 and .394"/10 mm Pitch.........................2-7
XL
Neoprene, 1/5"/5.08 mm Pitch........................2-6
Polyurethane, 1/5"/5.08 mm Pitch..................2-6
TIMING BELTS AND PULLEYS
Locator Chart.........................................................2-2
TIMING BELTS
40 D.P., Polyurethane
Kevlar Cord, .082"/2.07 mm Pitch.................2-37
Polyester Cord, .082"/2.07 mm Pitch............2-35
GT2
Neoprene
.079"/2 mm Pitch......................................2-162
.118"/3 mm Pitch......................................2-176
.118"/3 mm Pitch, Double-Sided............2-178
.197"/5 mm Pitch......................................2-193
.197"/5 mm Pitch, Double-Sided............2-194
Polymer Compound
.197"/5 mm Pitch......................................2-192
Trumotion
.079"/2 mm Pitch.................................2-161
.118"/3 mm Pitch.................................2-175
A-28
TIMING BELTS (CONTINUED)

HTD, Neoprene
.118"/3 mm Pitch...........................................2-112
.118"/3 mm Pitch, Double-Sided.................2-114
.197"/5 mm Pitch...........................................2-134
.197"/5 mm Pitch, Double-Sided.................2-136
L
Neoprene
3/8"/9.53 mm Pitch...................................2-100
3/8"/9.53 mm Pitch, Double-Sided........2-102
Polymer Compound, Trumotion
3/8"/9.53 mm Pitch.....................................2-99
MXL
Neoprene
.080"/2.03 mm Pitch...................................2-15
Polyurethane, Kevlar Cord
.080"/2.03 mm Pitch...................................2-20
.080"/2.03 mm Pitch, Double-Sided.........2-22
Polyurethane, Polyester Cord
.080"/2.03 mm Pitch...................................2-20
Polymer Compound, Trumotion
.080"/2.03 mm Pitch...................................2-18
XL
Neoprene, Fiberglass Reinforced
1/5"/5.08 mm Pitch.....................................2-56
1/5"/5.08 mm Pitch, Double-Sided..........2-59
Polymer Compound, Fiberglass Reinforced
1/5"/5.08 mm Pitch.....................................2-54
Polyurethane, Kevlar Cord
1/5"/5.08 mm Pitch.....................................2-58
1/5"/5.08 mm Pitch, Double-Sided..........2-60
Polyurethane, Polyester Cord
1/5"/5.08 mm Pitch.....................................2-58
TIMING PULLEY STOCK
40 D.P., Aluminum
.082"/2.07 mm Pitch........................................2-40
GT2
Aluminum
.079"/2 mm Pitch......................................2-165
.118"/3 mm Pitch......................................2-181
.197"/5 mm Pitch......................................2-196
Steel
.197"/5 mm Pitch......................................2-198
HTD
Aluminum
.118"/3 mm Pitch......................................2-117
.197"/5 mm Pitch......................................2-139
Steel
.118"/3 mm Pitch......................................2-119
.197"/5 mm Pitch......................................2-141
L
Aluminum & Steel
3/8"/9.53 mm Pitch...................................2-104
MXL, Aluminum
.080"/2.03 mm Pitch........................................2-24
ALPHABETICAL INDEX
TIMING PULLEY STOCK (CONTINUED)

XL
Aluminum, 1/5"/5.08 mm Pitch......................2-62
Steel, 1/5"/5.08 mm Pitch...............................2-63
TOLERANCE RINGS
External
................................................................4-28
Internal.................................................................4-26
TORQUE TUBE COUPLINGS
Acetal Tube, Aluminum Split Hubs...................6-78
TORSION SPRINGS...............................................10-93
TRACKS, "V" GUIDE
Drilled and Undrilled.............................................9-5
Plain, Stainless Steel............................................9-7
with Mounting Holes............................................9-6
TRANSDUCER GEARHEADS, See Gearheads
TRUMOTION TIMING BELTS
GT2, Polymer Compound
.079"/2 mm Pitch...........................................2-161
.118"/3 mm Pitch...........................................2-175
L, Polymer Compound
3/8"/9.53 mm Pitch..........................................2-99
MXL, Polymer Compound
.080"/2.03 mm Pitch........................................2-18
Technical Notes..................................................2-98
TWEEZERS, STAINLESS STEEL...........................15-52
U
ULTRASONIC SENSOR
For Clutches and Brakes.................................13-53
UNIFLEX COUPLINGS, STEEL SPRING.................6-75
UNIVERSAL JOINTS
Metal
Double Joint
Alloy Steel....................................................7-9
Single and Double Joint, Zero-Backlash
Inverted Design...........................................7-5
Miniature......................................................7-4
Single Joint
Alloy Steel....................................................7-7
Die Cast Zinc................................................7-8
Step-Down,Stainless Steel.......................7-6
Stainless Steel.............................................7-6
Single, Double and Telescoping
Selection Chart............................................7-0
Telescoping
Spline Extension..........................................7-9
Zero Backlash...........................................7-10
Molded Plastic
Double Joint
Brass Spider..............................................7-14
Single and Double Joint
Acetal..........................................................7-12
Single Joint
Brass Spider..............................................7-13
UNIVERSAL JOINTS (CONTINUED)

Molded Plastic (Continued)
Telescoping
Acetal......................................................... 7-15
Brass Extension........................................7-18
Brass Spider..............................................7-16
Nonmetallic, Single, Double and Telescoping
Selection Chart.................................................7-2
USDA APPROVED LEVELING FEET
Stainless Steel, 10 Articulation
Rubber Base Pad.........................................16-36
with Sealed Nut.......................................16-37
V
V-BELT PULLEYS
for 1/4" V-Belts, Molded...................................2-269
V-BELTS...................................................................2-268
VIBRATION MOUNTS
Base Mountings
Aluminum, Endur-C Elastomer Isolator
to 200 lbf..........................................................8-53
to 75 lbf............................................................8-52
Aluminum, Stainless Steel Mesh
to 1000 lbf........................................................8-56
Aluminum, Stainless Steel Spring and Mesh,
to 10 lbf............................................................8-51
to 242 lbf..........................................................8-54
Diamond Shape, Durulene or Neoprene
to 120 lbf..........................................................8-80
Rectangular, Durulene or Neoprene
Steel Base to 4000 lbf....................................8-78
Steel, Heavy-Duty, Stainless Steel Mesh
to 1598 lbf........................................................8-57
to 20000 lbf......................................................8-58
Center Bolt Mounts, Rubber
Solo Type.........................................................8-40.
Tandem Type...................................................8-41
Compression Springs, Rubber to 7000 lbf.......8-76
Conical Bumpers, Rubber, to 62 lbf..................8-30
Cylindrical Mountings
Neoprene
Female Thread-to-Blank
to 45 lbf..................................................8-33
Male Thread-to-Blank
to 50 lbf..................................................8-34
to 16 lbf..................................................8-31
to 45 lbf..................................................8-33
to 60 lbf..................................................8-32
Male-to-Male Thread
to 50 lbf..................................................8-34
Rubber
Female-to-Female Thread
to 86 lbf..................................................8-28
A-29
R
T
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
A
ALPHABETICAL INDEX
R
T
1
2
3
4
5
6
7
8
9
10
11
12
13
14
VIBRATION MOUNTS (CONTINUED)

Cylindrical Mountings
Rubber
Male-Female
to 210 lbf................................................8-27
Male-to-Male Thread
to 13.3 lbf...............................................8-16
to 25 lbf..................................................8-17
to 28.5 lbf...............................................8-18
to 75 lbf..................................................8-19
to 79 lbf..................................................8-20
to 86 lbf..................................................8-21
to 105 lbf................................................8-22
to 120 lbf................................................8-23
to 123 lbf................................................8-24
to 142 lbf................................................8-25
to 185 lbf................................................8-26
to 330 lbf................................................8-29
Cylindrical/Square Mountings
Rubber
to 14.5 lbf....................................................8-14
Damped Spring Mountings
Selection Criteria...........................................8-69
Steel Spring & Stainless Steel Mesh
to 200 lbf.....................................................8-67
to 750 lbf.....................................................8-68
to 1235 lbf...................................................8-70
to 2469 lbf...................................................8-71
Dampers
Silicone Gel, Flanged..................................8-6
Male-to-Male Thread...........................8-7
Durulene and Neoprene
Load Deflection Data.....................................8-79
Elliptic Leaf Spring Mountings
Test Data, Technical Notes..........................8-66
Nato Approved "X" & "XM" Type..................8-63
Nato Approved Lightweight "X" Type..........8-65
Technical Notes.............................................8-64
Finger-Flex Assemblies, Rubber, Steel Housing
to 37 lbf............................................................8-43
to 50 lbf............................................................8-44
Finger-Flex Mountings, Rubber
Bushing and Ring Style
to 12 lbf.......................................................8-45
to 25 lbf.......................................................8-46
to 37 lbf.......................................................8-47
to 80 lbf.......................................................8-48
to 350 lbf.....................................................8-49
Iso-Pad Mounts, to 4000 lbf...............................8-87
Iso-Pad Sheets, For Bolt Insulator & Shim.....8-89
Iso-Pads
to 100 psi..........................................................8-88
to 120 psi..........................................................8-90
15
A
A-30
VIBRATION MOUNTS (CONTINUED)

Leveling Base Mountings
Neoprene Isolator, to 12000 lbf....................8-86
Stainless Steel Mesh, to 10000 lbf..............8-84
Pad and Spring Mounts
Stainless Steel, Aluminum Base and Caps
to 4.4 lbf......................................................8-55
Pedestal Spring Suspension Mounts
4 lbf to 35 lbf....................................................8-60
Platemounts, Rubber
to 20 lbf............................................................8-35
to 26 lbf............................................................8-36
to 60 lbf............................................................8-37
to 90 lbf............................................................8-38
to 135 lbf..........................................................8-50
to 760 lbf..........................................................8-39
Rectangular Bumpers, Rubber, Steel Base
to 4700 lbf........................................................8-77
Rectangular Mountings, Rubber, Steel Base
to 1475 lbf........................................................8-75
Ring Mountings, Rubber
to 20 lbf............................................................8-15
Safety Channel Mountings
to 52 lbf/in........................................................8-72
to 90 lbf............................................................8-73
to 95 lbf............................................................8-74
Silicone Gel, Shock Absorbing Sheets..............8-9
Single Hole Spring Suspension Mounts
4 lbf to 35 lbf.........................................................8-61
Square Mountings, Rubber
to 13.8 lbf.........................................................8-12
to 15.4 lbf.........................................................8-13
Square Plate Spring Suspension Mounts
4 lbf to 35 lbf.........................................................8-59
Technical Notes..................................................8-82
W
WASHDOWN PILLOW BLOCKS, ACETAL
BEARINGS STAINLESS STEEL BODY,
FDA COMPLIANT PTFE ADDED...........................5-104
WASHERS
Bearing Retaining, Internal Push-In Design,
Steel
...................................................................10-62
Belleville Spring, Stainless Steel & Steel.....10-57
Countersunk Finishing, Nylon.........................10-56
Curved Spring, Stainless Steel & Steel.........10-58
Flat for Foot Mounts.........................................16-57
Flat, Nylon and PVC..........................................10-54
Flat, Stainless Steel..........................................10-52
Insulating, Fiber.................................................10-55
Lock, External & Internal, Stainless Steel....10-61
Precision, Flat, Stainless Steel.......................10-51
Shoulder, Nylon.................................................10-56
Split Lock for Foot Mounts..............................16-58
ALPHABETICAL INDEX
WASHERS (CONTINUED)
Split Lock, Stainless Steel & Steel
Black Oxide Finish............................................10-60
Thrust
General Purpose, G300 Polymer...............5-94
High-Temperature, T500 Polymer..............5-95
Industrial Grade, M250 Polymer................5-96
Oil-Impregnated Bronze.............................10-52
Oil-Impregnated Bronze "S" Series...........10-53
Wave Spring
Screw Size Series Beryllium Copper and
Stainless Steel..............................................10-59
Thin Wall Series, Stainless Steel..............10-59
WAVE WASHERS, See Washers
WHEELS
"V" Guide.................................................................9-8
"V" Guide, Studded..............................................9-10
Friction Drives...................................................15-35
WOODRUFF KEYS, STAINLESS STEEL.................4-29
WORM GEARS COMMERCIAL, RIGHT-HAND,
BRONZE
24 Pitch
14-1/2 P.A., Single Thread.........................1-218
20 P.A., Double Thread..............................1-219
25 P.A., Quadruple Thread........................1-220
32 Pitch
14-1/2 P.A., Single Thread.........................1-215
20 P.A., Double Thread..............................1-216
25 P.A., Quadruple Thread,.......................1-217
48 Pitch
14-1/2 P.A., Single Thread.........................1-212
20 P.A., Double Thread..............................1-213
WORM GEARS COMMERCIAL, MOLDED
See Molded Worm Gears Commercial
See Molded Worms Commercial
WORM GEARS PRECISION, RIGHT-HAND
48 Pitch, Bronze
14-1/2 P.A., Single Thread.........................1-210
20 P.A., Double Thread..............................1-210
64 Pitch, Bronze
14-1/2 P.A., Single, Double and Quadruple
Thread............................................................1-208
48 Pitch, Anti-Backlash, Bronze with Stainless
Steel Hub
14-1/2 P.A., Single Thread.........................1-211
20 P.A., Double Thread..............................1-211
64 Pitch, Anti-Backlash, Bronze with Stainless
Steel Hub
14-1/2 P.A., Right-Hand, Single, Double and
Quadruple Thread........................................1-209
WORMS COMMERCIAL, RIGHT-HAND, STEEL

24 Pitch
14-1/2 P.A., Single Thread.........................1-218
20 P.A., Double Thread..............................1-219
32 Pitch
14-1/2 P.A., Single Thread.........................1-215
20 P.A., Double Thread..............................1-216
48 Pitch
14-1/2 P.A., Single Thread.........................1-212
20 P.A., Double Thread..............................1-213
WORMS COMMERCIAL, MOLDED
See Molded Worms Commercial
WORMS PRECISION, RIGHT-HAND, STEEL
48 Pitch
14-1/2 P.A., Single Thread.........................1-210
20 P.A., Double Thread..............................1-210
64 Pitch
14-1/2 P.A., Single, Double and Quadruple
Thread............................................................1-208
WRENCHES
Hexagonal..........................................................10-21
Z
ZERO-BACKLASH GEARHEADS AND
SPEED REDUCERS
Technical Notes..................................................11-8
R
T
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
A-31
NOTES:

D810 Complete

Uploaded by

Document Information

Original Description:

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

D810 Complete

Uploaded by

Copyright:

Available Formats

I

PHONE: 516.328.3300 FAX: 516.326.8827 WWW.SDP-SI.COM

Handbook of INCH Drive Components D810

SDP: ISO 9001 Registered SI: ISO 9001 + AS9100 Registered

Stock Drive Products / Sterling Instrument

PHONE: 516.328.3300 FAX: 516.326.8827 WWW.SDP-SI.COM

A wealth of experience and knowledge accumulated by the SDP/SI

If engineering is the company's driving force,

Over 65% of the SDP/SI ready-to-deliver components are

The manufacturing division represents more

HOW TO USE THE HANDBOOK

If you know the NAME of the item:

Refer to the ALPHABETICAL INDEX located at the end of the catalog.

If you are looking for a particular PRODUCT TYPE:

Would you like to obtain additional literature?

Are you looking for technical assistance or a custom designed component?

For part numbers starting with letter S contact Sterling Engineering,

Are you inquiring about quantity discounts or placement of orders?

DOMESTIC SALES CONDITIONS

Ordering by phone: Telephone: (516) 328-3300

Ordering online: www.sdp-si.com

To get to the Online Shopping eStore, simply click BUY ONLINE.

Ordering by fax: Toll-Free Fax: 1 (800) 345-1144 (for orders only)

Please use our toll-free fax number to order.

Open Account Orders:

Credit Card Orders:

U.P.S., FedEx, U.S.P.S., or as specified by customer.

Returns and Exchanges:

Western Component Sales North, Inc.

DOMESTIC SALES REPRESENTATIVES

DOMESTIC SALES REPRESENTATIVES

DOMESTIC SALES REPRESENTATIVES

NEW YORK CITY (Metropolitan Area)

NEW YORK STATE

DOMESTIC SALES REPRESENTATIVES

INTERNATIONAL SALES CONDITIONS

STOCK DRIVE PRODUCTS/STERLING INSTRUMENT

Order online: www.sdp-si.com

Click BUY ONLINE to enter the Online Shopping eStore.

Large quantity order:

Considerable discounts are made available for large quantity orders.

Open Account Orders:

If you have an open account, we will ship and bill you.

Credit Card Orders:

U.P.S., FedEx, Air Parcel Post, or as specified by customer.

Returns and Exchanges:

INTERNATIONAL DISTRIBUTORS & SALES REPRESENTATIVES

ALGERIA, LIBYA, MAURITANIA,

INTERNATIONAL DISTRIBUTORS & SALES REPRESENTATIVES

HOW TO USE THE INDEX

Method 1: If you know the part number

Section - Page Number

Method 2: If you know the name of the item

Section - Page Number

PART NUMBER INDEX

PART NUMBER INDEX

PART NUMBER INDEX

PART NUMBER INDEX

PART NUMBER INDEX

PART NUMBER INDEX

A10Z 4-1550. ..................8-43

PART NUMBER INDEX

PART NUMBER INDEX