Professional Documents
Culture Documents
Esprit 770
sures even lamp control up to the maximum power level select-
ed throughout each lamp’s lifespan. Each Dynamic Power
model is available with an IQ-Sensor technology for an individ-
ual tan from head to toe.
Contents
Device description . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Technical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Maximum exhaust pipe lengths. . . . . . . . . . . . . . . . . 5
Device cooling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Surround cooling . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Exhaust air accessories. . . . . . . . . . . . . . . . . . . . . . . 7
Electrical connections . . . . . . . . . . . . . . . . . . . . . . . . 8
Sound system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Air conditioner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
AQUA FRESH AROMA system . . . . . . . . . . . . . . . . . 8
IR interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
IQ sensor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Device description
21
15660 / 0
Technical data
Esprit 770
Max. ambient temperature: 15 °C – 40 °C
Mains supply line (for example): H05VV-F 5G 6 mm² Max. inlet air temperature: 40 °C
or Exhaust cross section w/o exhaust system: 588 cm2
Nominal voltage: 230 – 240 V ~3 Cabin inlet air cross section at 1.5 m/s: 5370 cm2
Nominal frequency: 50 Hz Exhaust cross section with exhaust system: 710 cm2
Rated fusing: 3 x 50 A (time-delay) Warm air return: possible
Mains supply line (for example): H05VV-F 4G 10 mm²
Performance:
Canopy:
UV low pressure lamps 22 x 80 – 200 W1)
UV high pressure lamps 3 x 520 W2)
Lower part:
UV low pressure lamps 18 x 80 – 200 W1)
Side part:
UV low pressure lamps 8 x 80 – 200 W1)
UV high pressure lamps 1 x 520 W2)
Shoulder tanner:
UV high pressure lamps 2 x 250 W
1) Electronically controlled
2) Broad-band radiators
Dimensions
B 1525 mm Z
H5
B1 845 mm
H4
B2 205 mm L3
L2 L4
B+ 1545 mm
B– 1380 mm
X
L (w/o shoulder tanner) 2234 mm L1
B1
Esprit 770
H1
L1 2200 mm
Y
H
L
H2 L
L2 1762 mm
TK BK
L3 235 mm
B-
L4 243 mm B
B+
L5 867 mm 07677 / 1
L7 1120 mm L5
B2
H 1470 mm o
L7
H1 1965 mm
H2 1106 mm
H3 – mm
H4 450 mm
H5 56 mm
H9
H8
H6 1879 mm
H7
H6
H7 2002 mm
H8 2215 mm
H9 2360 mm
X 1245 mm 07678 / 0
Y 582 mm
Z 2236 mm
∅ 300 mm
BK 2400 mm
TK 2300 mm
Esprit 770
Roughness Permissible
Corrugated pipe 90° bend in line
(at centre) Flow volume Loss coefficient length of
∅ (metal)
kabsolute straight line
mm mm m³/h of pipe of bend pieces m
0 10
1 9
300 8 2550 0.1821) 0.211)
2 8
3 7
Roughness Permissible
Corrugated pipe 90° bend in line
(at centre) Flow volume Loss coefficient length of
∅ (metal)
kabsolute straight line
mm mm m³/h of pipe of bend pieces m
0 30
1 26
300 0.1 2550 0.0611) 0.211)
2 22
3 18
1) zeta value (ζ)
Device cooling
Cabin or studio air is drawn in beneath the front panel (1) of the lower part of the sunbed 3 2
and over the filter mats in the canopy (2) (inlet air) in order to cool the equipment.
The inlet air is first cleaned in a filter, then fed past the hot UV low-pressure and high-
pressure lamps and finally expelled as warm exhaust air via the central exhaust air
bracket (3) at the rear of the sunbed.
Esprit 770
1 15320 / 0
Surround cooling
Surround air ventilation for the user is provided automatically. The intensity is adjusta-
ble in 9 steps. Cabin or studio air is drawn in and used for cooling.
The air is fed through several nozzles over the whole length in the middle of the canopy.
In the head area there are two air nozzles that can be switched on separately.
Studio air is also supplied via the air inlet slots beneath the front panel of the sunbed
base and fed to two nozzles at feet level at the lying surface height, thus surrounding
the body with cooling air.
The user can have a pleasant cooling mist (AQUA FRESH) sprayed from the outer noz-
zles in the body area.
Depending on the equipment, an air conditioner enables the additional climate control
of the bed surface and the body air. 15321 / 0
With the optionally available air conditioning unit (Climatronic), the user can pre-select
the temperature of the bed surface and the body air according to his needs.
Corrugated pipe 1
Suitable device exhaust is possible with an exhaust pipe up to 10 metres in length (with-
out 90° bend). An auxiliary fan is required for exhaust pipes longer than 10 metres.
Esprit 770
Smooth pipe
15322 / 0
Suitable device exhaust is possible with an exhaust pipe up to 30 metres in length (with-
out 90° bend). An auxiliary fan is required for exhaust pipes longer than 30 metres.
Electrical connections
Sound system
Esprit 770
Controls
Air conditioner
Equipment variant: Climatronic for support panel and Surround Cooling with fully integrated climate control of body cooling; Cabin
climate control via body cooling run-on (temperature-controlled), no re-fitting possible.
IR interface
Standard equipment: Access to the device data with a hand-held unit (Palm).
IQ sensor
Equipment variant, re-fitting possible.
Further information about the IQ sensor, see Esprit 770 Dynamic Power IQ.