Professional Documents
Culture Documents
WS12-1
WS12-2
Workshop Objectives
Using a field for pressure loading, and creating constraints at the locations for washers
Problem Description
Create a field with the sin function, SINR(T) Create pressure loading, at the upper part of the anchor, using the field Create constraints at the location where washers are to go (lower part of the anchor)
Software Version
MSC.Patran 2005r2
WS12-3
WS12-4
Open existing database called Anchor.db a. File / Open. b. Select Anchor.db. c. Click OK.
WS12-5
a b
Plot only the solid and geometric points. a. Click Wireframe icon. b. Click Plot/Erase icon. c. Click Erase for All. d. Enter Solid 1 Point1:# for Selected Entities. e. Click Plot then OK. f. Click View corners icon and see figure for dragging.
d e f
WS12-6
Create point at center of arc using ArcCenter. a. Geometry: Create / Point / ArcCenter. b. See Figure for Curve List. Make sure to select on the Edge icon.
WS12-7
Create cylindrical coordinate system using 3Point method. a. Geometry: Create / Coord / 3Point. b. Select Cylindrical for Type. c. See figure for Origin. d. See figure for Point on Axis 3. e. See figure for Point on Plane 1-3.
c d e
WS12-8
Create field that uses sin(theta). a. Fields : Create / Spatial / PCL Function. b. Enter sine_theta for Field Name. c. Select Scalar for Field Type. d. Select Real for Coordinate System Type. e. Select Coord 2 for Coordinate System. f. Enter sinr( then pick T at the bottom of the form. Then, close expression with ). g. Click Apply.
b c d e
f
PAT301, Workshop 12, December 2005 Copyright 2005 MSC.Software Corporation WS12-9
Use the field to create pressure loading. a. Loads/BCs: Create / Pressure / Element Uniform. b. Enter pressure_load for New Set Name. c. Click Input Data d. Enter 1000 for Load/BC Set Scale Factor. e. Click in the Pressure box then select sine_theta from the Spatial Fields box. f. Click OK.. g. Click Select Application Region
d e
c g
PAT301, Workshop 12, December 2005 Copyright 2005 MSC.Software Corporation WS12-10
Select entities for application region for pressure loading. a. Select Geometry for Geometry Filter. b. See Figure for Select Solid Faces. Select the four faces at top of holes. c. Click Add. d. Click OK. e. Click Apply.
b c
e
PAT301, Workshop 12, December 2005 Copyright 2005 MSC.Software Corporation
WS12-11
WS12-12
Constraint at location of three washers. a. Loads/BCs: Create / Displacement / Nodal. b. Enter fix_at_washers. c. Click Input Data d. Enter <0,0,0> for Translations e. <T1 T2 T3> only. f. Click OK g. Click Select Application Region..
a d
c f e
PAT301, Workshop 12, December 2005 Copyright 2005 MSC.Software Corporation WS12-13
Select solid faces at location of washers a. Use Mouse rotate icon and rotate to the view as shown. b. Click Smooth Shade icon. (easier to view) c. Select Geometry for Geometry Filter. Click on the Surface or face icon. d. See Figure for Select Geometry Entities. (8 faces) e. Click Add, OK and Apply. f. Click Wireframe icon.
d e
e
PAT301, Workshop 12, December 2005 Copyright 2005 MSC.Software Corporation WS12-14
Plot markers for load and boundary conditions. a. Loads/BCs: Plot Markers. b. Select Displ_fix_at_washers and Press_pressure_load for Assigned Load/BC Sets. c. Select Current Viewport for Group filter. d. Select default_group for Select Groups. e. Click Apply.
c d
e
PAT301, Workshop 12, December 2005 Copyright 2005 MSC.Software Corporation
WS12-15
a
Quit MSC.Patran a. Select File on the Menu Bar and select Quit from the drop down menu
WS12-16