Professional Documents
Culture Documents
Turbine protection system performs to cover the following functions Protection of the turbine from inadmissible operating conditions In case of plant failures, protect against the subsequent damages It restricts failures to a minimum The Standard Turbine Protection consists of
RTS ENERGISES
TURBINE PROTECTION
HYDRAULIC PROTECTION
RIGHT
OR AND
AND
TURBINE TRIPS
AND
LEFT
OR AND
NOT
AND
TURBINE TRIPS
OR
COMMANDS
R
3 SEC
S
GEB CB OPEN
AND
COMMANDS VACUUM BKR OPEN TRIP OIL PR < 5 KSC
ESVS CLOSED ALARM FIRE PROT CH-1 NOT COMPLETE
AND
S
FIRE PROT-2 FAULT
R
OR 10 SEC
COMMANDS 1. SGC OIL SUPPLY OFF 2. SLC AOP-1 OFF 3. SLC AOP-2 OFF 4. SLC EOP ON 5. SLC JOP-1 OFF 6. SLC JOP-2 OFF 7. SLC TURNING GEAR OFF 8. AOP-1 0FF 9. AOP-2 OFF 10. JOP-1 OR JOP-2 ON 11. TRIP OIL PR < 5 KSC
AND
R
FIRE PROT-2 FAULT
FIRE PROTECTION-1
Operation: Manual & Auto Turbine trips
FIRE PROTECTION-2
Operation: Manual Turbine trips
Solenoids 1 & 2 of oil shut- off Solenoids 1 & 2 of oil shut- off valve energises, shut off valve closes valve energises, shut off valve and oil from the governing rack closes and oil from the governing drains rack drains Condenser vacuum breaker opens Condenser opens vacuum breaker
AOP, JOP takes auto start, Gate SGC OIL goes off, AOPs will not valve gearing opens and machine take start, JOP-2 & EOP takes comes to barring |gear start, Gate valve gearing will not open and machine will not come on Barring gear
HYDRAULIC PROTECTION
OVER SPEED TRIP DEVICE