Professional Documents
Culture Documents
Ver : 10-30-08
310-200
QUESTION 1
The accidental abort sequence sends your SPARC-based system into the PROM
mode. You want to prevent the abort sequence from being initiated in the future.
What should you do?
A. Enter the .trap command which will list the types of SPARC traps.
B. Enter the kbd -a disable command to disable the abort sequence.
C. Enter the probe-scsi-all command to disable KEYBOARD_ABORT.
D. Set the value of the keyboard in PROM mode to disable.
Answer: B
QUESTION 2
You receive a complaint from a Certkiller .com user that his x86-based system does
not start properly. You suspect that faulty BIOS settings are the cause of this
problem. You need to abort the boot process and enter the BIOS.
What should you do?
A. You should run the stop+a command to open the BIOS configuration menu.
B. You should run the uadmin command to open the BIOS configuration menu.
C. You should run the hpadmin command to open the BIOS configuration menu.
D. You should press the reset button or the Ctrl+Alt+Del key combination and then
press the BIOS option.
QUESTION 3
You receive the output as shown in the following exhibit:
ap: : sysinit:/sbin/sutopush -f/etc/iu.ap
sp: : sysinit:/sbin/soconfig -f /etc/sock2path
smf: :sysinit:/lib/svc/bin/svc.startd >/dev/msglog 2< >/dev/msglog </dev/console
p3:s1234:powerfail:/usr/sbin/shutdown -y -i5 -g0 >/dev/msglog 2< >/dev/msglog
Which of the following statements regarding this output are FALSE? (Select TWO
options.)
Answer: A, C
QUESTION 4
Certkiller.com has a SPARC-based computer named Certkiller -WS200 that has
numerous custom device aliases. You need to temporarily disable these aliases.
What should you do?
Answer: C
QUESTION 5
You have installed Solaris 10 OS on an x86-based system. However, the graphics
configuration was not automatically detected during the installation process. You
now need to create an Xsun configuration file.
What should you do?
Answer: D
QUESTION 6
You have received instructions from the Certkiller .com CEO to upgrade the PROMs
of two identical SPARC-based computers, however, one of the computers failed to
upgrade.
What is the probable cause of this problem?
Answer: C
QUESTION 7
A Certkiller .com uses named Andy Reid has complains that his SPARC-based
computers fails to start. During your investigation, you receive the message:
"Timeout waiting for ARP/RARP packet".
You need to troubleshoot the computer's boot environment. What should you do?
(Select THREE options.)
Answer: B, D, E
QUESTION 8
A Certkiller .com user named Mia Hamm complains that she cannot use the SSH
service to access her lab system. You connect to the system via a serial line and run
the # svcs -l sshcommand. You receive the output shown in the following
exhibit:
# svcs -l ssh
fmri svc:/network.ssh:default
name SSH server
enabled true
state offline
next_state none
state_time Wed Mar 16 22.56.07 2004
logfile /var/svc/log/network-ssh:default.log
restarter svc:/system/svc/restarter:default
contract_id
dependency require_all/none
svc:/system/svc/filesystem/local (online)
dependency optional_all/none
svc:/system/svc/filesystem/autofs (online)
dependency require_all/none
svc:/network/loopback (online)
dependency require_all/none
svc:/network/physical (disabled)
dependency require_all/none
svc:/system/cryptosvc (online)
dependency require_all/none
svc:/system/utmp (online)
dependency require_all/restart
file://localhost/etc/ssh/ssh_config (online)
What is the probable cause of this problem?
Answer: D
The output indicates that the /network/physical is disabled. This is a dependency that has
not been met therefore SSH not running.
QUESTION 9
You need to verify physical path information on an SPARC-based system. What
should you do?
Answer: C
QUESTION 10
You need to shut down the Apache HTTPD service on a Solaris server. When you
run the
svcs grep apache command, you received the output shown in the following
exhibit:
Legacy_run Mar_04 1RC:/ETC/RC3_D/S50APACHE
Which of the following statements regarding this output are TRUE? (Select TWO
options.)
Answer: B, D
QUESTION 11
When you run the # who command
on a Solaris 10 OS system, you received the output shown in the following exhibit:
# who -r
. run-level S Jun 16 17:24 s 1 3
Which of the following statements regarding this output is TRUE?
Answer: A
QUESTION 12
Certkiller .com has a SPARC-based system that contains two device aliases named
disk01 and disk02. The SPARC-based system is configured to use disk01 as the boot
disk. You want to reconfigure the system to use disk02 as the default boot disk.
What should you do?
Answer: A
QUESTION 13
You are employed as a system administrator at Certkiller .com. You need to perform
system maintenance an x86-based system named Certkiller -WS200. You need to
boot Certkiller -WS200 into single user mode to perform the system maintenance.
What should you do?
Answer: C
QUESTION 14
You need to determine which software cluster has been installed on a Solaris 10 OS
system.
What should you do?
Answer: C
QUESTION 15
You need to install Solaris 10 OS on an x86-based system that is running Solaris 8
OS. You begin the installation by inserting installation CD 1 in the CD-ROM drive
and rebooting the system. However, when the system reboots, Solaris 8 OS is loaded.
What should you do? (Select TWO options.)
A. Use the boot cdrom -nowin command to start the installation process.
B. Use a DCA diskette to boot the system and direct the diskette to read the installation
CD.
C. With the current OS running, insert installation CD 1 and start the installation process.
D. Configure the BIOS to boot from CD-ROM, insert installation CD 1 the CD-ROM
drive and reboot the system.
Answer: B, D
QUESTION 16
You need to upgrade a SPARC-based server that is running Solaris 8 OS to Solaris
10 OS. You need to accomplish this task with the least amount of downtime and you
must be able to rollback the system if the upgrade is not satisfactory.
What should you do?
Answer: A
QUESTION 17
Certkiller .com obtains a new x86-based system. You need to install Solaris 10 OS in
text mode on the system.
What should you do?
Answer: C
QUESTION 18
Certkiller .com has obtained a new system. You need to install Solaris 10 OS on the
new system from the CD-ROM. You need to ensure that the software cluster on the
new system recognizes but does not activate network services.
What should you do?
Answer: B
QUESTION 19
You need to install Solaris 10 OS on a new system. The Certkiller .com company
policy requires all installations to be performed over the network using a secure
protocol. You need to ensure that you meet the requirements of the company policy
when you install the OS on the new system.
What should you do?
A. You should install the system by using the WANboot installation method.
B. You should install the system by using the SunInstall installation method.
C. You should install the system by using the Web Start installation method.
D. You should install the system by using the Custom JumpStart installation method.
Answer: A
QUESTION 20
Match the configuration cluster names to the correct description.
Answer:
QUESTION 21
You need to install an additional disk to a SPARC-based system. What should you
do? (To answer, arrange the steps in the correct order. You do not need to use all
the available options.)
Answer:
QUESTION 22
You need to create a new UFS file system that will maximize the amount of space
available. The file system must be such that the data is organized in one inode for
every 15,123 bytes of occupied data space.
What should you do?
Answer: A
QUESTION 23
During routine maintenance you notice that the one of the disks on a Solaris system
is almost at full capacity. You open the file system and the directory as shown in the
following exhibit to remove some of the files.
#ls -li
total 33570624
268566 -rw-------- 5 bin bin 4294967296 Mar 12 10:30 file1
268566 -rw-------- 5 bin bin 4294967296 Mar 12 10:30 file2
268566 -rw-------- 5 bin bin 4294967296 Mar 12 10:30 file3
268566 -rw-------- 5 bin bin 4294967296 Mar 12 10:30 file4
What amount of disk space can be accumulated when deleting these files?
A. 0 bytes
B. 33,570,624 bytes
C. 33,302,058 bytes
D. 17,179,869,184 bytes
Answer: A
QUESTION 24
Certkiller .com is concerned that users are installing unauthorized software on the
systems using the CD-ROM drives. You need to disable the volume management
service from starting upon restart on a production server.
What should you do?
Answer: C
QUESTION 25
Certkiller .com suffers a power outage. A few hours later the power is restored. A
Certkiller .com user named Mia Hamm informs you that her Solaris system is not
functioning properly. You investigate and discover that the system in not mounting
Mia Hamm's home directory. You suspect that the power outage may have
corrupted the superblock in the /dev/dsk/c0t0d0s2 file system. You need to locate
the alternative backup superblocks.
What should you do?
Answer: B
QUESTION 26
You must add SCSI disks to a server. You need to access a directory to get the
physical paths of the address.
What should you do?
Answer: D
QUESTION 27
All the Solaris OS servers at Certkiller .com should be EFI labeled for security
reasons. However, some systems have disks less than 1 terabyte.
What should you do?
Answer: A
QUESTION 28
Where will you find the information regarding files and directories that pertains to
a SUNWvts package that was installed on a system?
A. In the /var/sadm/system/data.
B. In the pkgadd -d /tmp SUNWast.
C. In the /var/spool/SUNWvts.
D. In the /usr/aset/archives.
E. In the CONSOLE=/dev/console.
Answer: C
QUESTION 29
Match the file types to the correct description.
Answer:
QUESTION 30
The /export/home file system holds all the Certkiller .com users' home directories as
/export/home/<username>.
When you run the df-h command on a Solaris system, you receive the output as
shown in the following exhibit:
Filesystem Size used avail capacity Mounted on
/dev/dsk/c1t2d0s0 7.9G 7.5G 0.4G 95% /export/home
This output indicates that the users' home file system is near capacity. You want to
display the disk usage by user.
What should you do?
Answer: D
QUESTION 31
You need to retrieve data off a diskette that was placed into a drive. The drive was
not functional since the operating system did not recognize it. You ensure that
volume management was enabled.
What should you do?
A. Ensure that the volume management daemon is running and execute the pkgadd
command.
B. Ensure that the volume management daemon is running and execute the volcheck
command.
C. Ensure that the volume management daemon is running and execute the pkginfo
command.
D. Ensure that the volume management daemon is running and execute the pkgrm
command.
Answer: B
QUESTION 32
At present a Sun VTS software package is located in the /var/tmp directory. You
need to convert this software package's format from file system format to data
stream format to enable propagation of the software using the WANboot server.
What should you do?
A. You should run the # pkgtrans /var tmp /tmp/SUNWvts.pkg SUNWvts command.
B. You should run the # pkgstream SUNWvts /var/tmp/SUNWvts.datastream command.
C. You should run the # pkgconvert -f var/tmp/SUNWvts -d var/tmp/SUNWvts.pkg
command.
D. You should run the # pkgtrans SUNWvts command.
Answer: A
QUESTION 33
Certkiller .com contains a server on the local network that has several tape devices
attached to it. No configuration changes have been made to the standard
configuration system login accounts. You need to ensure that remote backups are
performed.
What should you do?
A. Configure the /.rhosts file on the server with the tape devices.
B. Configure the /dev/rmt/0n fsf 4 file on the server with the tape devices.
C. Configure the /etc/hosts.equiv file on the server with the tape devices.
D. Configure the /etc/hostname/tape.conf file on the server with the tape devices.
Answer: A
QUESTION 34
What should be done to the file that is created as a checking point and to pass
information during the incremental restores of a successfully completed restore of
the tape backup of the /export/home file system?
Answer: A
QUESTION 35
An x86-based server will not boot the Solaris 10 OS due to a problematic pboot and
boot block. You need to restore the pboot and boot block on the / (root) slice located
on disk c0t0d0s1.
What should you do?
A. Boot the system from the CD-ROM into single user mode. Then run the
# cd /boot-device = disk and # installboot /dev/rdsk/c0t0d0s1 commands.
B. Boot the system from the CD-ROM into single user mode. Then run the
# cd /usr/platform/uname -m /lib/fs/ufs and
# install -setenv boot-device -pboot /dev/rdsk/c0t0d0s1 commands.
C. Boot the system from the CD-ROM into single user mode. Then run the
# cd /usr/platform/uname -m /lib/ and the
# install - setenv boot-device -b bootblock /dev/rdsk/c0t0d0s1 commands.
D. Boot the system from the CD-ROM into single user mode. Then run the
# cd /usr/platform/uname -m /lib/fs/ufs and
#installboot /usr/platform/uname -I /lib/fs/ufs/pboot \usr/platform/uname
-/lib/fs/ufs/bootblk/dev/rdsk/c0t0d0s1 commands.
Answer: D
QUESTION 36
When you run the df-F ufs -k command on a Solaris system, you receive the
output shown in the following exhibit:
Filesystem kbytes used avail capacity mounted on
/dev/dsk/c0t0d0s0 192423 83078 90103 48% /
/dev/dsk/c0t0d0s6 1984230 1023921 900783 54% /usr
/dev/dsk/c0t0d0s3 10082476 192423 46438 27% /var
/dev/dsk/c0t0d0s5 1984230 663 1924041 1% /export
/dev/dsk/c0t0d0s7 3806230 819633 2948535 22% /opt
You need to make a backup of the / (root) file system without unmounting it or
bringing the system to single-user mode.
What should you do?
Answer: B
QUESTION 37
You must create a backup of a file system without unmounting the file system or
disrupting users currently logged in to the service. You thus need to create a
snapshot of the file system.
What should you do?
Answer: C
QUESTION 38
You need to backup the home directories of a Solaris 10 OS server. What should
you do? (To answer, arrange the steps in the correct order.)
Answer:
QUESTION 39
You need to remove the snapshot and backing store of the /export file system that
was created with the following commands:
# mkdir /var/tmp/backup-snaps
#fssnap -o bs=/var/tmp/backup-snaps /export
What should you do?
Answer: D
QUESTION 40
Which of the following commands will yield information regarding the disk device
that holds nightly backups on the /export3 file system? (Select TWO options.)
Answer: C, E
QUESTION 41
How would you go about removing the files created by a snapshot process when
making backups of file systems?
Answer: C
QUESTION 42
You need to restore the /etc/inet/hosts file from the second ufsdump file on a tape.
What should you do? (To answer, arrange the commands in the correct order to
accomplish this task.)
Answer:
QUESTION 43
The exhibit shows the output on a default Solaris OS installation:
$ id
uid=1001 (awalsh) gid=1 (other)
$ echo $SHELL
/bin/ksh
$ su - root -c "mozilla"
Sun Microsystems Inc. SunOS 5 . 10 s10_74 March 2007
Welcome to Solaris 10 on Certkiller -ws200
-sh: mozilla: not found
Which of the following statements regarding this output are TRUE? (Select THREE
options.)
Answer: A, B, F
QUESTION 44
Exhibit 1:
#id
uid=101 (rory) gid=10(rory)
#su kara
Exhibit 2:
#tail -2 /etc/passwd
rory:x:105:18:/export/home/rory:/bin/ksh
kara:x:106:19:/export/home/kara:/bin/ksh
Which of the following statements are TRUE given the above exhibits? (Select TWO
options.)
Answer: B, D
QUESTION 45
You work as the Solaris OS administrator at Certkiller .com. You need to create a
new user account for a new employee named Rory Allen. The user account must
have the name rallen and the user's home directory must be /export/home/rallen.
The home directory must be created when the account is created. In addition, Rory
Allen must have access to the Korn shell and must use javap as his primary group
and javad as his secondary group.
What must you do? (Select TWO options.)
command.
D. Run the # useradd -d /export/home/rallen -m -g other -g /bin/ksh -G javad -s /bin/ksh
rallen command.
Answer: A, C
QUESTION 46
The /var/svc/log/network-ssh:default.log file on a Solaris Os sytem contisn the
entries shown in the following exhibit:
[ Jun 16 17:45:36 Leaving maintenance because clear requested. ]
[ Jun 16 17:45:36 Enabled. ]
[ Jun 16 17:45:36 executing start method ("/lib/svc/method/sshd start")
]
Could not load host key: /etc/ssh/ssh_host_rsa_key
Could not load host key: /etc/ssh/ssh_host_dsa_key
Disabling protocol version 2. Could not load hostkey or GSS-API
mechanisms
sshd: no hostkeys available -- exiting.
[ Jun 16 17:45:36 Method "start" exited with status 1 ]
Which of the following statements regarding this output are TRUE? (Select TWO
options.)
Answer: B, D
QUESTION 47
You receive the output as shown in the following exhibit:
/etc/hosts.equiv
Certkiller -sr24
/.rhosts
Certkiller -ws200
/etc/ftpd/ftpusers
root
Certkiller -sr24
Which of the following statements regarding this output are TRUE? (Select TWO
options.)
A. The root user on Certkiller -WS200 can use rlogin, no password required.
B. The user on Certkiller -SR24 may not access the ftp service on this system.
C. None of the users on Certkiller -SR24 may access the ftp service on this system.
D. Any user on Certkiller -WS200 can use relogin to become root, no password
required.
E. Any user on Certkiller -SR24 can use relogin to become root, no password required.
Answer: A, B
QUESTION 48
You receive the output as shown in the following exhibit:
# logins -x -1 root.mia,rory
root 0 root 0 Super-User
/
/sbin/sh
NP 082587 -1 -1 -1
mia 2000 bin 2
/usr/bin
/sbin/sh
LK 012504 -1 -1 -1
rory 1001 other
/export/home/rory
/bin/ksh
PS 012505 -1 -1 -1
Which of the following statements regarding this output are TRUE? (Select TWO
options.)
Answer: A, C
QUESTION 49
Certkiller .com issues a new security policy which states that all root logins are to be
disabled. You need to ensure that your system complies with the new security policy.
What should you do?
A. You should edit the /etc/default/login file to contain the line 'CONSOLE='.
B. You should edit the /etc/default/login file to contain the line 'CONSOLE=false'.
C. You should edit the /etc/default/login file to contain the line 'CONSOLE=no'.
D. You should edit the /etc/default/login file to contain the line 'CONSOLE=/dev/rmt/0'.
E. You should edit the /etc/default/login file to contain the line 'CONSOLE=/dev/rmt/0n
fsf 4'.
Answer: A
QUESTION 50
A new Certkiller .com security policy requires you to track the number of failed
logins after three unsuccessful attempts by the same user. To comply with the new
Certkiller .com security policy, you create the /var/adm/loginlog file. Now you need to
change the file that contains the line SYSLOG_FAILED_LOGINS=5.
Where will you find SYSLOG_FAILED_LOGINS=5?
Answer: A
QUESTION 51
A Certkiller .com user named Mia Hamm has an entry in the cron.allow and
cron.deny files.
What will happen if Mia Hamm attempts to execute the crontab command?
Answer: A
Explanation: If a user has an entry in both cron.allow and cron.deny, then user can
run the crontab command.
QUESTION 52
A Certkiller .com user named Kara Lang complains that she cannot access the
/export/share/sales file. When you run the ls command on the
/export/share/sales file you receive the output shown in the following exhibit:
# ls -1 /export/share/sales
-rw-rw-r--+ 1 root root 3441 Mar 23 19:06 /export/share/sales
What could be the reason that Kara Lang cannot access this file?
Answer: C
QUESTION 53
A Certkiller .com user named Andy Walsh complains that he cannot access the IP
print server. You verify that the print server is running but discover that the print
service is offline. You need to put the service back on line.
Answer: D
QUESTION 54
You need to determine why a system is performing slowly. What should you do?
(Select TWO options.)
Answer: B, E
QUESTION 55
You receive the output shown I the following exhibit:
# pwdx pgrep cron
156: /var/spool/cron/atjobs
# pfiles pgrep cron | grep -I log
/var/cron/log
/var/cron/log
# pcred pgrep cron
156: e/r/suid=0 e/r/sgid=0
groups: 0 1 2 3 4 5 6 7 8 9 12
Which of the following statements regarding this output are TRUE? (Select TWO
options.)
Answer: A, C
QUESTION 56
How would you go about setting up a cron job that will run the /usr/bin/banner
command to display "backup tonight" in a window at 5 every Tuesday afternoon?
Answer: D
QUESTION 57
The exhibit shows the ck_app1 process currently running on a system:
# ps -ef | grep ck_app1
root 1285 1 0 14:31:48 ? 0:00 /bin/ksh ./ck_app1
While the ck_app1 is using the CPU it performs unacceptably slow. You need to stop
the process to restore acceptable performance.
What should you do? (Select TWO options.)
Answer: C, E
QUESTION 58
A new printer named hp3005n is replacing the old, now obsolete printer named
lx200. You need to put hp3005n into use and decommission lx200 without losing any
print jobs.
What should you do?
Answer: B
QUESTION 59
You need to install a local printer on Solaris 10 OS system. What should you do?
(To answer, arrange the steps in the correct order.)
Answer:
QUESTION 60
Certkiller .com Security issues a new security policy which states that trusting hosts
and any users is NOT allowed anymore. You need to ensure that your system meets
the requirements of the new policy.
What should you do?
Answer: B
QUESTION 61
You need to add extra network ports to a SPARC-based system that is equipped
with a Quad Fast Ethernet card. You turn the system off and install the qfe card in
an available PCI slot. You need to ensure that the OS can access the card.
What should you do? (To answer, arrange the appropriate steps in the correct order
to accomplish this task. You do not need to use all the available options.)
Answer:
QUESTION 62
Certkiller .com Security issues a new security policy which states that the sendmail
service should not run on a server named Certkiller -SR24. You need to configure
Certkiller -SR24 to meet the new policy. You need to ensure that your
configuration is permanent.
What should you do?
Answer: C
QUESTION 63
Certkiller .com has purchased 10 new SPARC-based Sun workstations that needs to
have Solaris 10 OS installed. You need to make sure that the firmware on the new
SPARC-based Sun workstations is at the latest revision.
What should you do?
A. View the firmware revision by running the version and the .registers ok prompt
commands.
B. View the firmware revision by running the banner and the .version ok prompt
commands.
C. View the firmware revision by running the banner and the show-devs ok prompt
commands.
D. View the firmware revision by running the .registers and the banner ok prompt
commands.
Answer: B
QUESTION 64
To create an alias for the secondary network interface on a SPARC-based
workstation you need the exact FORTH Monitor syntax for the command that lists
all the network interfaces at the ok prompt. You have been informed that the
command contains the string net. You need to list all the commands that contain the
string net.
What should you do?
Answer: D
QUESTION 65
Certkiller .com obtains a new system that has a monitor, a keyboard, a 5 GB hard
disk, 128 MB of RAM, a CD-ROM drive and Open Boot PROM firmware Version
4.14. You want to the Entire Solaris software group as well as Original Equipment
Manufacturers (OEM) support cluster on the system using the GUI installation Method.
What should you do?
Answer: C
QUESTION 66
Certkiller .com obtains a new system that has a monitor, a keyboard, a 5 GB hard
disk, 128 MB of RAM, a CD-ROM drive and Open Boot PROM firmware Version
4.14. You want to the Entire Solaris software group as well as Original Equipment
Manufacturers (OEM) support cluster on the system using the GUI installation Method.
What should you do?
Answer: C
QUESTION 67
Match the appropriate run level to the correct SMF Milestone. (You do not need to
use all the available options.)
Answer:
QUESTION 68
You installed Solaris 10 OS on an x86-based computer but the computer runs
without a graphical interface as the graphic configuration had not been detected
automatically. You need to create a xorg configuration file.
What should you do?
Answer: C
QUESTION 69
You work as a Solaris administrator at Certkiller .com. An administrator at another
company informs you the Sun Microsystems has recently released a PROM patch.
You need to determine which PROM revision the SPARC-based systems at
Certkiller .com are presently using.
What should you do?
Answer: D
QUESTION 70
Which of the following will the Boot Solaris Menu in the Device Configuration
Assistant on an x86-based system allow you to do?
Answer: C
QUESTION 71
Certkiller .com has an x86-based system that is running Solaris 10 OS. You need to
boot the system into single-user mode to perform system maintenance. You want the
system to boot directly into single user mode.
What should you do?
A. Reboot the system and type init -s when the Boot Interpreter menu appears.
B. Reboot the system and type b -s when the Current Boot Parameters menu appears,
type
C. Reboot the system and type boot -s when the Current Boot Parameters menu appears,
D. Reboot the system and type boot -r when the Current Boot Parameters menu appears,
Answer: B
QUESTION 72
You must configure a SPARC-based system to dual boot between Solaris 9 OS and a
Solaris 10 OS. You bring the system to run level 0, attach a new boot disk, and
power cycle the server to the ok prompt. The new disk is shown as /pci@if,
0/pci@1/SUNWW, isptwo@4/sd2, 0. Now you need to create a new permanent device
alias called CK0 3disk.
What should you do?
Answer: B
QUESTION 73
When you use the boot command to reboot a SPARC-based system, you receive the
message shown in the following exhibit:
Ok boot
Rebooting with command: boot Boot device: disk02 File and args:
Evaluating: boot
Can't open boot device
Ok
You suspect that resetting the boot device parameter to its default value would
resolve this problem. However, you do not want to reset other variables to their
default values.
What should you do?
Answer: C
QUESTION 74
How would you go about incorporating a new service named banner into SMF after
the appropriate entries have been added to the milestones where this service is
stopped and started and the service scripts are in the correct locations?
Answer: C
QUESTION 75
You need to create a Xorg configuration file on a newly installed Solaris 10 OS on
an x86-based computer.
What should you do?
Answer: D
QUESTION 76
You have used snapshot to back up the file systems. Afterwards you need to delete
the snapshot and remove the backing store file. However, you have forgotten which
backing store file is in use. How will you find the required information?
Answer: B
QUESTION 77
You have just installed Solaris 10 OS on a new system. Which of the following
services is available on the system? (Select TWO options.)
A. XNS
B. ARP
C. DNS
D. LDAP
E. RARP
Answer: C, D
QUESTION 78
The /etc/dumpdates file contains the entries shown in the following exhibit:
/dev/rdsk/c0t0d0s7 0 Mon Mar 07 23:59:59 2008
/dev/rdsk/c0t0d0s7 2 Mon Mar 14 23:59:59 2008
/dev/rdsk/c0t0d0s7 5 Mon Mar 21 23:59:59 2008
/dev/rdsk/c0t0d0s7 7 Mon Mar 28 23:59:59 2008
You need to list the backup files that have been created and modified since March
15.
What should you do?
Answer: B
QUESTION 79
An automated backup of the /export3 file system fails due to a lack of space on the
tape. You need to manually restart the backup.
What should you do? (Select TWO options.)
A. Run the # /usr/lib/fs/nfs/nfsfind command to determine which disk device holds the
/export 3 file system.
Then put in a fresh tape and restart the backup manually.
B. Run the # /usr/bin/enable:euid=lp command to determine which disk device
holds the /export 3 file system.
Then put in a fresh tape and restart the backup manually.
C. Run the# /usr/sbin/df command to determine which disk device holds the /export 3 file
system.
Then put in a fresh tape and restart the backup manually.
D. Run the
# /usr/lib/help/auths/locale/C command to determine which disk device holds the /export
3 file system.
Then put in a fresh tape and restart the backup manually.
E. Run the # /usr/sbin/mount command to determine which disk device holds the /export
3 file system.
Then put in a fresh tape and restart the backup manually.
Answer: C, E
QUESTION 80
The remote tape drive /dev/rmt/0 is attached to the host Certkiller -SR12. You
need to restore the remote tape's /var/adm directory and its contents.
What should you do?
Answer: D
QUESTION 81
When you run the # df -h command, you receive the output shown in the
following exhibit:
# df -h | egrep -I "File|dsk"
Filesystem size used avail capacity mounted on
/dev/dsk/c0t2d0s0 7.9G 4.0G 3.8G 48% /
# fssnap -F ufs -o bs=/var/tmp/fssnap.etc /etc
fssnap: ioctl: error 22: Invalid argument
Which of the following statements regarding this output are TRUE? (Select TWO
options.)
A. The fssnap command will fail to execute because there is insufficient space for the
backing store file.
B. The fssnap -F nfs -o bs=/var/tmp/fssnap.etc /etc command will be able to execute.
C. The fssnap -F ufs -o bs=/var/tmp/fssnap.etc /etc command will be able to execute.
D. The fssnap command will save the backing store file if either another ufs or nfs file is
present.
E. The fssnap command will fail to execute because the backing store file is on the same
file system.
Answer: D, E
QUESTION 82
You need to mount a snapshot to check whether certain files are included on the
snapshot prior to making a backup of the /export/project file system.
What should you do?
Answer: A
QUESTION 83
You have used a file system snapshot to backup the /export directory by running the
commands shown in the following exhibit:
# mkdir /var/tmp/backup-snaps
#fssnap -o bs=/var/tmp/backup-snaps /export
A few months late the file system begins to run out of free space. You want to free
up file system space by removing the snapshot and backing store.
What should you do?
Answer: D
QUESTION 84
You need to install an additional disk to a SPARC-based system. What should you
do? (To answer, arrange the steps in the correct order.)
Answer:
QUESTION 85
Which of the following services are available in a Solaris 10 OS installation? (Select
THREE options.)
A. NIS
B. XNS
C. NIS+
D. LDAP
E. RARP
Answer: A, C, D
QUESTION 86
You need to provide a list of the Solaris software cluster groups. What should you
do?
Answer: E
QUESTION 87
Certkiller .com has obtained a new system. You are required to prepare the new
system for the installation of Solaris 10 OS. You need to ensure that you are able to
recover the root slice on the system in the least amount of time should the root slice
becomes corrupt.
Which of the layouts should you implement on the system?
A. / 71.5 GB
Swap 512 MB
B. / 40 GB
Swap 1024 MB
/usr 10 GB
C. / 20 GB
Swap 1024 GB
/usr 10 GB
/export/home 41 GB
D. / 20 GB
Swap 1024 MB
/var 10 GB
/usr 30 GB
/export/home 21 GB
Answer: D
QUESTION 88
You need to install Solaris 10 OS on a workstation that has limited disk space. You
need to ensure that the workstation will be user friendly since many of the
Certkiller .com users are new to Solaris 10.
What should you do?
A. Install the Core software group and include the CDE packages.
B. Install the End User software group and include the CDE packages.
C. Install the Developer software group and include the CDE packages.
D. Install the Entire Distribution software group and include the CDE packages.
E. Install the Entire Distribution Plus OEM software group and include the CDE
packages.
Answer: B
QUESTION 89
Certkiller .com has obtained five new systems that will be used by the Development
group. The Development group wants you to install the least possible network
services on the new systems.
What should you do?
Answer: B
QUESTION 90
You want to be able to install the Entire Solaris software group as well as Original
Equipment Manufacturers (OEM) support cluster on a Solaris system using the
GUI installation Method.
What should you do? (Select THREE options.)
Answer: B, C, F
QUESTION 91
You need to upgrade the operating system on a server to Solaris 10 OS. You need to
ensure that the upgrade is completed with the least amount of downtime. You have
a week to prepare for the upgrade.
What should you do?
Answer: D
QUESTION 92
You need to add more disk space to a Solaris system. The additional disk space will
be used to store application data. You shut the system off and attach a new SCSI
disk to the existing SCSI chain. You then reboot using a reconfiguration boot.
Where will the device name for the new SCSI disk stored on this system? (Select
TWO options.)
Answer: A, B
QUESTION 93
When you run the Is-li command, you receive the output as shown in the following
exhibit:
total 4
83215 -rw-r-r-- 2 userr1 other 180 Mar 7 12:11 Certkiller doc1
83215 -rw-r-r-- 2 userr1 other 180 Mar 7 12:11 Certkiller doc2
What will happen when you delete Certkiller doc2? (Select TWO options.)
Answer: C, E
QUESTION 94
Match the file system types to the correct device on which the file system would be
located.
Answer:
QUESTION 95
Which of the following statements regarding the basic functions of the Solaris OS
print service are TRUE?
A. The tracking function is responsible for converting print job to the appropriate type.
B. The initialization function is responsible for managing print jobs.
C. The filtering function is responsible for ensuring that the printer is in a known state.
D. The fault notification function is responsible for printing an error message when a
problem occurs.
Answer: D
Incorrect Answers:
A: The filtering function is responsible for converting print job to the appropriate type.
B: The tracking function is responsible for managing print jobs, including viewing and
canceling print jobs.
C: The initialization function is responsible for ensuring that the printer is in a known
state.
QUESTION 96
Arrange the appropriate steps in the order you would perform them when you want
to install an additional disk to a SPARC-based system. (You do not need to use all
the available options.)
Answer:
QUESTION 97
After you modified a critical root file system on /dev/dsk/c0t0d0s7 the system fails to
boot properly. You then boot the system to a level that will allow access to the disk
where the modified root file system is located, and will allow you to set the terminal
type. Now you need to make the file system available for edit.
What should you do?
Answer: A
QUESTION 98
Sun has recently released a patch with the patch number 113106-01. You are not
sure if another administrator has applied the patch to the SunManagement Center
server. You need to check the SunMC server to see if it was applied.
What should you do? (Select TWO options.)
Answer: C, D
QUESTION 99
You must reformat a disk using its predefined disk layout. You also need to load the
predefined table and commit it to the disk.
What should you do?
A. You should run the name command and the label command in the partitions
sub-menu.
B. You should run the label command and the select command in the partitions
sub-menu.
C. You should run the choose command and the modify command in the partitions
sub-menu.
D. You should run the shareall command and the select command in the partitions
sub-menu
Answer: B
QUESTION 100
The /dev/dsk/c2t2d0s1 disk slice on which has the /opt/software file system is
mounted is about to fail. You need to forcibly unmount the file system and take the
disk offline.
What should you do?
Answer: B
QUESTION 101
You need to locate information about every file and directory contained a package
named SUNWast that was installed on your system. What should you do?
Answer: C
QUESTION 102
An application on a Solaris 10 OS system sends the message "No space left on
device." and terminates. You need to resolve this problem. What should you do?
Answer: C
Explanation: You need to run the # pctree command to go to the target directory of
the application, and the
# df command to check the remaining file system.
QUESTION 103
You install an additional disk to a Solaris server. The new disk is labeled c4t0d0.
You need to format the new disk so that it is identical to the existing c2t0d0 disk.
You want use a script to accomplish this task.
What should you do?
Answer: D, E
QUESTION 104
Certkiller .com has two printers named hp3005d and hp4350n. The hp3005d begins
to malfunction. You want to shift the pending print jobs from hp3005d to hp4350n.
You also want the queue for hp3005d to reject print requests.
What should you do?
D. You should run the lpadmin -m hp3005d hp4350n and reject hp3005d command.
Answer: B
QUESTION 105
Which of the following statements regarding the svcs command is TRUE?
Answer: C
QUESTION 106
You need to create a script that will perform daily checks to see if at jobs are
scheduled to run on a system.
Which of the following commands should you include in the script? (Select TWO
options.)
Answer: A, E
QUESTION 107
You need to configure printer services for the Certkiller .com's Solaris-based
network. Match the printer services configuration steps to the correct description.
Answer:
QUESTION 108
Certkiller .com has a print server named Certkiller -PR03. Certkiller -PR03 has a
single print spooler named hp3005d. You need to edit the shell script that sends the
jobs associated with hp3005d to the printer.
What should you do?
Answer: B
QUESTION 109
Certkiller .com has a script named ck_scr that must be run every other month
starting from March. The script must run every Monday, Wednesday, and Friday.
What should you do?
Which of the following achieves this?
Answer: D
QUESTION 110
You receive the output as shown in the following exhibit:
Online 16:23:28 svc:/network/telnet:default
Offline 10:59:38 svc:/application/print/ipp-listener:default
Maintenance 17:56:41 svc:/network/ssh:default
Which of the following statements regarding this output is TRUE?
A. You can retrieve the PID of sshd by running the svcs -p network/ssh command.
B. You can restart the ssh service by running the svcadm clear ssh command.
C. You can shut down the telnet service by running the kill /network/telnet command.
D. You can retrieve the process IDs for the telnet service by running the svcs -x
command.
Answer: B
QUESTION 111
During routine monitoring, you notice that the log file that lists the users logged in
on local remote hosts have not been updated for the past 18 hours. You verify that
the script is present and that it has the correct permissions. You need to determine
that the daemon is online.
What should you do?
Answer: B
QUESTION 112
You are logged on to a system as the root user. You receive the output as shown in
the following exhibit:
$ id
uid=1014 (miahamm) gid=1 (other)
$ ls -al /etc/data
- r------- 1 root other 394 Nov 22 10:24 /etc/data
$ cat /etc/data
cat: cannot open /etc/data
You want to allow both the root user and the user miahamm to read the /etc/data
file system. What should you do? (Select THREE options.)
Answer: B, D, E
QUESTION 113
You are concerned that malicious user may be attempting to gain access to a server
on the Certkiller .com network. You want to check the log files for logins that failed
after five attempts. What should you do?
Which file contains this information?
Answer: C
QUESTION 114
You want use the useradd command to add a user named miahamm to a Solaris 10
OS system. You want the home directory for the user mhamm to be created
automatically. You begin to add the user by issuing the commands are shown in the
following exhibit:
useradd -d /export/home/miahamm \
-s /bin/ksh \
Which of the following commands should you issue to complete the configuration?
A. -c miahamm
B. -m miahamm
C. -f miahamm
D. -R miahamm
E. -D miahamm
Answer: B
QUESTION 115
You receive the output as shown in the following exhibit:
cat /etc/shadow
root: Certkiller -sr23/A:6445:::::
daemon:NP:6445::::::::::::
bin:NP:6445::::::::::::
sys:NP:6445::::::::::::
adm:NP:6445::::::::::::
lp:NP:6445::::::::::::
uucp:NP:6445::::::::::::
nuucp:NP6445: ::::::::::::
smmsp:NP:6445::::::::::::
listen:*LK*::::::::::::
gdm:*LK*::::::::::::
webservd:*LK*:: ::::::::::::
nobody:*LK*:6445: ::::::::::::
noaccess:*LK*:6445::::::::::::
nobody4:*LK*:6445::::::::::::
mia:*LK*::::::::::::11983
amy: Certkiller -ws202: 12077::::::::::::
rory: Certkiller -ws203: 12077::::::::::::11983
Answer: A.C
QUESTION 116
A Certkiller .com user with the user name kara has logged in at the console and used
the su command to assume the identity of the root user.
Which of the following statements regarding the whoami and who am I commands
in this scenario is TRUE?
A. Both the whoami and the whoam I commands will report the root user.
B. The whoami command will report the user kara while the who am I command will
report the root user.
C. The whoami command will report the root user while the who am I command will
report the user kara.
D. Both the whoami and the who am I commands will report the user kara.
Answer: C
QUESTION 117
Which of the following services are available in a Solaris 10 OS installation?
Answer: A
QUESTION 118
A Certkiller .com user named Mia Hamm has a large file named ckdata that she
needs to print as quickly as possible. As the default printer is offline for
maintenance purposes, you want to suggest that Kara Lang send ckdata to the
hp3005x printer on the Certkiller -PR02 print server.
What should you do?
command.
D. Instruct Mia Hamm to run the /usr/lib/lpr -d Certkiller -pr02:hp3005x ckdata command.
Answer: B
QUESTION 119
Certkiller .com issues a new security policy which states that non-privileged users
should not be able to run the crontab command. You need to ensure that all system
comply with the new security policy.
What should you do?
Answer: C, D
QUESTION 120
You receive the output as shown in the following exhibit:
# fssnp -F ufs -o bs=/export/scratch/ Certkiller -sr12
.fssnap.etc.maxsize=50g /etc
# /usr/lib/fs/ufs/fssnap -i
Snapshot number : 0
Block Device : /dev/fssnap/0
Raw Device : /dev/rfssnap/0
Mount point : /
Device state : active
Backing store path : /export/scratch/ Certkiller -sr12.fssnap.etc
Backing store size : 2368 KB
Maximum backing store size : 52428000 KB
Snapshot create time : Tue May 10 17:23:49 2005
Copy-on-write granularity : 32 KB
## df -kh | egrep -i "File /dsk/fssnap/scratch"
Filesystem size used avail capacity Mounted on
/dev/dsk/c0t2d0s0 7.9G 3.0G 4.8G 38% /
192.168.1.227:/dev/dsk/c0t2d0s0 18G 3.0G 15G 17% /export/scratch
/dev/fssnap/0 7.9G 3.0G 4.8G 38% /mnt
Which of the following statements regarding this output are TRUE? (Select TWO
options.)
A. You can use the fssnap -d /etc command to delete the /dev/rfssnap/0 snapshot.
B. You can use the fssnap -d /etc command to automatically delete the backing store file.
C. Server 129.147.12.105 has the backing store file of /dev/fssnap/0.
D. The /mnt file system is mounted on /dev/fssnap/0 with the read/write permission.
Answer: A, C
QUESTION 121
A Certkiller .com user named Kara Lang wants to transfer files from a
DOS-formatted floppy disk her home directory; however, volume management has
been disabled on all systems at Certkiller .com.
You need to mount the floppy disk. What should you do?
Answer: C
QUESTION 122
You need to stop a Certkiller .com user named Amy Walsh from having access to the
crontab command.
What should you do? (Select TWO options.)
Answer: B, C
QUESTION 123
Arrange the commands in the correct order to restore the /etc/inet/hosts file from
the second ufsdump file on a tape backup.
Answer:
QUESTION 124
Which of the following x86 system configurations meets the minimal requirements
for Solaris 10 OS?
Answer: A
QUESTION 125
A Certkiller .com user named Rory Allen complains that the performance of an
x86-based system has been badly degraded. You investigate and discover that the
CPU usage is high. You then run the # ps -ef command and receive the output as
shown in the following exhibit:
# ps -ef | grep ck_app2
root 1968 1 0 11:23:57 ? 0:00 /bin/ksh ./ck_app2
You want to stop the ck_app2 process. What should you do?
Answer: D
QUESTION 126
You need to obtain the physical and logical device names for the disks currently in
Answer: B
QUESTION 127
Which of the following are natively supported in the Solaris 10 OS? (Select FIVE
options.)
Answer: A, B, E, G, I
QUESTION 128
Which of the following will be displayed when the banner command is issued at the
FORTH Monitor during the installation of Solaris 10 OS on a new SPARC-based
system?
Answer: A
QUESTION 129
You need to do emergency hardware maintenance but there are several users
currently logged on. How do you go about giving all users a warning that the system
will be halted in three minutes?
Answer: D
QUESTION 130
A Certkiller .com system does not boot from its Solaris 10 OS disk. You boot the
system from the CD-ROM and receive the output shown in the following exhibit at
the console:
* /dev/rdsk/c0t0d0s2 partition map
*
* Dimensions:
* 512 bytes/sector
* 63 sectors/track
* 16 tracks/cylinder
* 1008 sectors/cylinder
* 17662 cylinders
* 17660 accessible cylinders
*
* Flags:
* 1: unmountable
* 10: read-only
*
* First Sector Last
* Partition Tag Flags Sector Count Sector Mount Directory
0 2 00 1049328 9024488 10073815 /
1 3 01 0 1049328 1049327
2 5 00 0 17801280 17801279
4 7 01 10073816 5627354 15701168 /var
5 8 00 15701169 2100110 17801279 /home
Which of the following statements regarding this output is TRUE?
A. The partition command in the format utility was used to produce this output.
The output indicates that Slice 4 is unmountable.
B. The prtvtoc /dev/rdsk/c0t0d0s2 command was used to produce this output.
The output indicates that Slice 4 is unmountable.
C. The prtvtoc /dev/rdsk/c0t0d0s2 command was used to produce this output.
The output indicates that Slice 0 is unmountable.
D. The cat /etc/mnttab command was used to produce this output.
The output indicates that Slice 0 is unmountable.
Answer: B
QUESTION 131
You are concerned that your password may be captured by snoop when you attempt
a remote log in to a default installation of Solaris 10 OS. You want to prevent this
from happening.
What should you do? (Select TWO options.)
Answer: D, E
QUESTION 132
A Certkiller .com user named Amy Walsh has left the company. You need to remove
Amy Walsh's user account and home directory from all production servers.
What should you do?
Answer: A
QUESTION 133
Certkiller .com suffers a power outage. When power is restored a non-networked
SPARC-based system reboots successfully. An hour later the user reports that he
can no longer access files in the /usr directory. The /usr directory does not have its
own file system. You suspect that the power outage may have corrupted the file
system. You need to resolve this problem.
What should you do? (To answer, arrange the commands in the correct order to
resolve this problem.)
Answer:
QUESTION 134
Which of the following statements regarding snapshots are TRUE? (Select TWO
options.)
A. You cannot take a snapshot of a file system that is a multi-terabyte file system.
B. You cannot take a snapshot of a file system if the backing store file is not located on
the source file system.
C. You cannot take a snapshot of a file system that is used as a backing store by real-time
applications.
D. You cannot take a snapshot of a file system that is currently being used by system
accounting.
Answer: C, D
QUESTION 135
You need to recover a service repository database that has become corrupted. What
should you do?
A. You should overwrite the contents of the repository.db with the contents of the
global.db, reboot the system, and import the custom manifests.
B. You should reboot the system using the boot -r db command.
C. You should clear the contents of the global.db, reboot the system, and import the
custom manifests
D. You should run the kill svc.configd command and reboot the system.
Answer: A
QUESTION 136
You need to forcibly unmount the disk slice /dev/dsk/c2t0d0s4 regardless id users
are accessing the file system. What should you do?
Answer: D
QUESTION 137
You want to set the group ID of a file named set_gid. What should you do?
Answer: D
QUESTION 138
When you run the df-k command on a file system that s running in multiuser mode,
you receive the output shown in the following exhibit:
#df -k
Filesystem kbytes used avail capacity mounted on
/dev/dsk/c0t0d0s5 8066141 153699 7831781 12% /opt
/dev/dsk/c0t0d0s4 4032654 9 3992319 1% /test
/dev/dsk/c0t0d0s7 10082476 38393 9943259 1% /work
You want to check the file system but you are concerned that a running a file system
check on a mounted file system in multiuser mode may cause a panic. What should
you do? (To answer, arrange the commands in the correct order to safely run a file
system check.)
Answer:
Explanation:
Before you can umount a file system, you have to run the # fuser command to list all the
processes.
QUESTION 139
You had made a backed up of the file system from a snapshot. A user accidently
deletes some of the files. You need to restore these files from backup.
What should you do?
Answer: C
QUESTION 140
During routine monitoring you notice the output shown in the following exhibit:
SU 11/08 14:27 + pts/3 root-mia
SU 11/10 10:18 - pts/5 amy-root
SU 11/10 10:19 + pts/5 amy-root
SU 11/11 20:11 + console root-clive
SU 11/12 20:43 - pts/2 mia-root
SU 11/12 20:44 - pts/2 mia-guest
SU 11/12 20:46 + pts/2 mia-amy
Which of the following proves your statement?
A. The user mia knows the password to the user amy's account.
B. The user mia knows the password for the root user.
C. The user amy knows the password for the root user.
D. The user clive knows the password for the root user.
Answer: A, C
QUESTION 141
A new Certkiller .com security policy states that all attempts to use the su command
must be logged to the console. You need to ensure that your system complies with
this policy.
What should you do?
Answer: D
QUESTION 142
You have just taken a snapshot of the /export/data file system. You begin to back up
the file system but the file system used for the backup store runs out of disk space
while the backup is being performed.
Which of the following statements regarding this backup is TRUE?
Answer: A
QUESTION 143
You are employed as the Solaris administrator at Certkiller .com. You need to create
a trust for a Certkiller .com user named Rory Allen who has the user name rory. The
trust must allow Rory Allen to log on to Certkiller -SR24 from
Certkiller -WS200.
What should you do?
Answer: D
QUESTION 144
You need to take a service that is managed by SMF offline. Before you take the
service offline, you want to make sure that no other service is dependent on this
service.
What should you do?
Answer: B
QUESTION 145
During a routine monitoring, you notice three identical files in the /export file
system. You know that the inode number 10077 have been allocated to one of the
files. You need to verify that the files are hard linked.
What should you do? (Each correct option is a complete solution. Select TWO
options.)
Answer: A, D
QUESTION 146
A Certkiller .com user named Mia Hamm complains that her SPARC-based system
reboots intermittently. When you consult the system logs you discover messages
about some hardware error. You want to ascertain the nature of the hardware
failure by running extended POST tests without the OS being reloaded.
What should you do? (To answer, arrange the steps in the correct order that will
allow you to run extended POST tests without reloading the OS.)
Answer:
QUESTION 147
You need to backup the /export/data file system that is 2 GB in size to the default
tape drive. The backup must be performed for five consecutive nights and none of
the backups must be overwritten. You want to automate this backup by using a
script.
What should you do?
Answer: E
QUESTION 148
A Certkiller .com user named Kara Lang has a large file named ckdata that she
needs to print as quickly as possible. As the default printer is offline for
maintenance purposes, you want to suggest that Kara Lang send ckdata to the
hp3005x printer on the Certkiller -PR07 print server.
What could you do? (Each correct option is a complete solution. Select TWO
options.)
A. Instruct Kara Lang to run the /usr/ucb/lpr -P Certkiller -pr07:hp3005x ckdata command.
B. Instruct Kara Lang to run the /usr/bin/lp -f ckdata command.
C. Instruct Kara Lang to run the /usr/bin/lp -d Certkiller -pr07:hp3005x ckdata
command.
D. Instruct Kara Lang to run the /usr/ucb/lpr ckdata:hp3005x: Certkiller -pr07
command.
E. Instruct Kara Lang to run the /usr/lib/lpr -d Certkiller -pr07:hp3005x ckdata command.
Answer: A, C
QUESTION 149
Which of the following signals instructs a UNIX daemon to reread its configuration
file?
Answer: B
QUESTION 150
Arrange the Boot PROM commands in the correct order to allow you to network
boot a Solaris system with the additional network card that is NOT an onboard
Ethernet.
Answer:
QUESTION 151
The file system on a Solaris computer has become corrupted. You repair the file
system. Three weeks later a Certkiller .com user informs you that some files have
accidentally been deleted. You need to restore the files; however, the only backup of
this file system is tar archive that can only be restored as root.
Which of the following statements regarding this restore process are TRUE? (Select
TWO options.)
A. After the restore process, the timestamp of the restored files will reflect the time the
file was last modified before it was backed up, and NOT the time the file was restored.
B. After the restore process, the access times of the restored files will be preserved and
will reflect the time a user last accessed the file.
C. The files that were NOT deleted and are still on the file system will NOT be
overwritten during the restore process.
D. The deleted files will be restored from the backup tape to the file system and will
contain the data as it was when the backup was made.
Answer: A, D
QUESTION 152
You are employed as a system administrator at Certkiller .com. You need to restore a
corrupted /usr file system on an x86-based system named Certkiller -WS200.
Solaris 10 OS is installed on Certkiller -WS200. You need to boot
Certkiller -WS200 into single user mode to perform the restore process.
What should you do?
A. Boot from the CD-Rom and enter boot -r when the Current Boot Parameters menu
appears.
B. Boot from the CD-Rom and enter init -b when the Current Boot Parameters menu
appears.
C. Boot from the CD-Rom and enter b -s when the Current Boot Parameters menu
appears.
D. Boot from the DCA and enter boot -s when the Current Boot Parameters menu
appears.
Answer: C
QUESTION 153
You have just taken a snapshot of the /export/data file system. Before you back up
the file system, you want to verify that a critical file is present on the snapshot. You
need to mount the snapshot to check for this file.
What should you do?
Answer: D
QUESTION 154
You have installed an additional hard disk drive to an x86-based system named
Certkiller -WS292. Certkiller -WS292 is running Solaris 10 OS. You need to
ensure that the OS can recognize the new disk drive. What should you do? (Select
TWO options.)
A. Reboot Certkiller -WS292 and enter the # devfsadm -v command. Then run the #
format command to verify that the system recognized the new disk drive.
B. Reboot Certkiller -WS292 and enter the # reconfigure command. Then run the #
format command to verify that the system recognized the new disk drive.
C. Reboot Certkiller -WS292 and enter boot -r at the Current Boot Parameters menu.
Then run the # format command to verify that the system recognized the new disk
drive.
D. Select Add new hardware from the System menu. Then run the # format command to
verify that the system recognized the new disk drive.
Answer: A, C
QUESTION 155
When you run the # svcadm milestone command on a Solaris system, you receive
the output as shown in the following exhibit:
# svcadm milestone -d svc:/milestone/single-user:default
Which of the following statements regarding the output in this exhibit are TRUE?
(Select TWO options.)
Answer: A, D
QUESTION 156
You work as a Solaris administrator at Certkiller .com. An administrator at another
company informs you the Sun Microsystems has recently released a PROM patch.
You need to determine which PROM revision the SPARC-based systems at
Certkiller .com are presently using.
What should you do?
Answer: D
QUESTION 157
The Finance department at Certkiller .com requires a directory that will allow the
users in the Finance department to share files. Certkiller .com users in the other
departments must not be able to access the files. The users in the Finance
Department are part of different UNIX groups and the Certkiller .com policy states
that an umask of 007 must be used.
You create a new UNIX group named Fin, and add the users in the Finance
Department to this group. You then change the ownership of the directory to the
Fin group, and set the mode to 0770.
What should you do next?
Answer: B
QUESTION 158
You need to install a Solaris 10 OS installation on a system. Your installation must
ensure that the recovery of the root slice (/) will require the least amount of time
should the root file system becomes corrupted.
Which of the following layouts should you implement for the root slice (/)?
A. / 71.5 gigabyte
swap 512 megabyte
B. / 40 gigabyte
swap 1024 gigabyte
/usr 10 gigabyte
C. / 10 gigabyte
swap 1024 megabyte
/var 10 gigabyte
/usr 30 gigabyte
/export/home 21 gigabyte
D. / 20 gigabyte
swap 1024 megabyte
/usr 10 gigabyte
/export/home 41 gigabyte
Answer: C
QUESTION 159
Certkiller .com has moved a large number of disks from the Sales department to
your department. You installed the disks on a Solaris server named
Certkiller -SR36. You now need to prepare the disks for use on Certkiller -SR36.
You want to remove the partition information but you do NOT want to clear the
VTOC. You want to automate this task by writing a script.
What should you do?
Answer: B
QUESTION 160
Which of the following statements regarding the Character device file type is
TRUE?
A. It allows a file name to reference another file named that is in the logical file tree.
B. It supports read and write operations on a file system.
C. It transfers data as a stream of bytes to and from a device.
D. It allows a file to have two or more names as long as the file names are located in the
same file system.
Answer: D
QUESTION 161
You need to backup file systems from a snapshot. Once the backup is complete, you
want the files that are created by the snapshot process to be removed.
What should you do? (Select TWO options.)
Answer: B, C
QUESTION 162
Which of the following statements regarding the svcadm command is TRUE?
Answer: A
Incorrect Answers:
B: The svccfg command is used to modify the contents of the service configuration
repository.
C: The svcs command displays the service state of all service instances.
QUESTION 163
You are in the process of selecting files that are to be restored to a system
interactively with the ufsrestore command when your assistance is required
elsewhere. When you return to the system you cannot remember which files you had
already selected for marked for extraction and restore.
You need to determine which files you've already selected as quickly as possible.
What should you do?
Answer: C
QUESTION 164
You need to remove the SUNWaudd package from a Solaris system. However, when
you run the command to remove this package, you receive the messages shown in
the following exhibit:
## Verifying package dependencies.
WARNING:
The <SUNWauddx> package depends on the package currently being removed.
WARNING:
The <SUNWusb> package depends on the package currently being removed.
Dependency checking failed.
If you continue to remove the SUNWauddx and SUNWusb packages, what would
happen to the files associated with those packages?
A. The files will be marked for removal and will be removed when the system is next
rebooted.
B. Only the files associated with the SUNWusb package will be removed.
C. Only the files associated with the SUNWauddx package will be removed.
D. The files will NOT be removed from the system.
Answer: D
QUESTION 165
Match the file system types to the correct file system name. (You may use any of the
options more than once.)
Answer:
QUESTION 166
You need to troubleshoot a service on a SPARC-based system that is configured to
automatically at boot time. You want SMF to start all services and you want to view
messages for the services on the console.
What should you do?
Answer: A
QUESTION 167
Which of the following statements regarding the ufsrestore command and the inode
allocation is TRUE?
A. If the ufsrestore command is used to restore a file system from a tape backup to a new
file system, the inodes of the new file system will be allocated successively as the files
are restored, regardless of the inode numbers recorded to tape.
B. If the ufsrestore command is used to restore a file system from a tape backup to a new
file system, the inode numbers recorded on tape will be allocated to the new file system
but if an inode number is already allocated in the file system, an unallocated inode will
be allocated.
C. If the ufsrestore command is used to restore a file system from a tape backup to a new
file system, the inode numbers recorded on tape will be allocated to the new file system,
overwriting that inodes that had been allocated before the restore.
D. If the ufsrestore command is used to restore a file system from a tape backup to a new
file system, the inode numbers recorded on tape will be allocated to the new file system
but if an inode number is already allocated in the file system, ufsrestore stops and returns
a fail message.
Answer: A
QUESTION 168
Which of the following statements regarding the basic functions of the Solaris OS
print service are TRUE? (Select TWO options.)
A. The filtering function is responsible for converting print job to the appropriate type.
B. The initialization function is responsible for managing print jobs.
C. The fault notification function is responsible for ensuring that the printer is in a known
state.
D. The tracking function is responsible for printing an error message when a problem
occurs.
E. The queuing function is responsible for scheduling the print queue.
Answer: A, E
Incorrect Answers:
B: The tracking function is responsible for managing print jobs, including viewing and
canceling print jobs.
C: The initialization function is responsible for ensuring that the printer is in a known
state.
D: The fault notification function is responsible for printing an error message when a
problem occurs.
QUESTION 169
You receive the output from the # ls -l command as shown in the following
exhibit:
# ls -l ck_app1
-rwsr-xr-x 1 root other 327 Jun 17 17:05 ck_app1
You also receive the output from the # grep command as shown in the following
exhibit:
# grep miahamm /etc/passwd
miahamm:x:103:23::/export/home/miahamm:/bin/ksh
Which of the following statements regarding the output in these exhibits is TRUE?
A. When Mia Hamm runs the ck_app1 application, the effect UID for the process would
be 103.
B. When Mia Hamm runs the ck_app1 application, the effect UID for the process would
be 23.
C. When Mia Hamm runs the ck_app1 application, the effect UID for the process would
be 0.
D. When Mia Hamm runs the ck_app1 application, the effect GID for the process would
be 23.
E. When Mia Hamm runs the ck_app1 application, the effect UID for the process would
be 103.
Answer: C, D
QUESTION 170
You want to create a customized device alias for one of the disks on a SPARC-based
system in run level 0. You need to select the device path and insert the path into the
command line to create the new device alias. What should you do?
Answer: D
QUESTION 171
Certkiller .com has an x86-based system. You need to install Solaris 10 OS on the
system. However, the system does NOT booting from the CD-ROM or the network.
What should you do?
Answer: B
QUESTION 172
After applying a patch to a Solaris system you notice that the system performs
poorly. Patches that were applied previously did not result in poor performance.
You want to rollback the last patch.
Which of the following statements regarding this scenario are TRUE? (Select TWO
options.)
A. The latest patch can be rolled back if the patchadd -d command was NOT used to
apply the patch.
B. The latest patch cannot be rolled back if it is a recommended patch.
C. The latest patch can be rolled back if a previous revision of the patch is already
installed.
D. The latest patch can be rolled back if it is NOT required by another patch.
E. The latest patch can be rolled back if the patchadd -d command was used to apply the
patch.
Answer: A, D
QUESTION 173
A SPARC-based system suffers a hard disk failure. You replace the failed disk with
a new disk. You now want to restore the entire contents of the / (root) file system
from the /dev/rmt/0 default tape device.
What should you do? (To answer, arrange the commands in the correct order to
restore the data.)
Answer:
QUESTION 174
In which phase of the boot process of a SPARC-based system is ufsboot loaded?
Answer: C
QUESTION 175
You need to install Solaris 10 OS on a new system. As part of the installation
process you create individual partitions with file systems for / (root), /usr, /var, /opt,
/export/swap, and /tmp. You also create an individual partition for swap. You need
to ensure that the system has sufficient disk space for the savecore crash dump
feature.
What should you do?
A. Ensure that the swap and /export/swap partitions have sufficient disk space.
B. Ensure that the /var and / partitions have sufficient disk space.
C. Ensure that the /opt and /tmp partitions have sufficient disk space.
D. Ensure that the /usr partition has sufficient disk space.
Answer: B
QUESTION 176
A Certkiller .com user named Mia Hamm complains that the CD-ROM on her
system is not mounting automatically. You run the svcs -p | grep vold command on
Mia Hamm's system and discover that the process is not running.
You want to restart the process. What should you do?
Answer: C
QUESTION 177
A Certkiller .com user named Amy Walsh complains that the / (root) file system on
her Solaris system keeps filling up when she prints large documents. You log on to
Amy Walsh's system and discover that the system has a 36 GB disk that is
partitioned as shown in the following exhibit:
/ 15 Gigabyte
swap 1 Gigabyte
/export/home 20 Gigabyte
You need to resolve this problem. What should you do?
Answer: A
QUESTION 178
Match the shutdown procedures to the correct description.
Answer:
QUESTION 179
One night the file system on a SPARC-based system becomes corrupt. You need to
restore the file system from backup. The /etc/dumpdates file for the file system
contains the entries shown in the following exhibit:
/dev/rdsk/c0t0d0s4 0 Thu Mar 18 18:24:23 2004
/dev/rdsk/c0t0d0s4 2 Fri Mar 19 18:24:23 2004
/dev/rdsk/c0t0d0s4 3 Sat Mar 20 18:24:23 2004
/dev/rdsk/c0t0d0s4 4 Sun Mar 21 18:24:23 2004
What should you do?
Answer: A
QUESTION 180
Certkiller .com has a Solaris system that has the Sun VTS software package in the
/var/tmp directory. You want to convert the Sun VTS software package from file
system format to a data stream format.
What should you do?
Answer: A
QUESTION 181
You receive the output shown in the following exhibit:
#id
uid=101 (miahamm) gid=10(miahamm)
#su amywalsh
A. The EUID of the user amywalsh is 102 and her EGID is 11.
B. The EUID of the user amywalsh is 101 and her EGID is 11.
C. The EUID of the user amywalsh is 102 and her EGID is 10.
D. The EUID of the user amywalsh is 101 and her EGID is 10.
Answer: A
QUESTION 182
A Certkiller .com user named Amy Walsh complains that she is having difficulty
login to a Solaris system. Another administrator suggests that you use the su
command to assume the user identity for Amy Walsh but you are not sure if this is
possible. You want to verify that you can assume the user identity for Amy Walsh.
What should you do?
Answer: D
QUESTION 183
The /var/svc/log/network-ssh:default.log file on a Solaris Os sytem contisn the
entries shown in the following exhibit:
[ Jun 16 17:45:36 Leaving maintenance because clear requested. ]
[ Jun 16 17:45:36 Enabled. ]
[ Jun 16 17:45:36 executing start method ("/lib/svc/method/sshd start")
]
Could not load host key: /etc/ssh/ssh_host_rsa_key
Could not load host key: /etc/ssh/ssh_host_dsa_key
Disabling protocol version 2. Could not load hostkey or GSS-API
mechanisms
sshd: no hostkeys available -- exiting.
[ Jun 16 17:45:36 Method "start" exited with status 1 ]
Which of the following statements regarding this output are TRUE? (Select TWO
options.)
C. This problem can be resolved by running the #svcadm clear ssh command.
D. The root user must generate a public/private key pair before the ssh service can start.
Answer: A, D
QUESTION 184
A Certkiller .com user named Rory Allen complains that he not able to use ftp to
connect to a server named Certkiller -SR24. You verify that Certkiller -SR24
and that it is running the ftp service. You want to verify that Rory Allen is allowed
to use ftp.
What should you do?
Answer: D
QUESTION 185
The graphics of an x86-based system is shown in the following exhibit:
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultDepth 16
Subsection "Display"
Depth 8
Modes "1152x900" "1024x768" "800x600"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 16
Modes "1152x900" "1024x768" "800x600"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 24
Modes "1152x900" "1024x768" "800x600"
ViewPort 0 0
EndSubsection
Which of the following statements regarding this configuration is TRUE?
A. This system has a default color depth of 8 and a default display resolution of 800x600.
B. This system has a default color depth of 8 and a default display resolution of
1024x768.
C. This system has a default color depth of 16 and a default display resolution of
800x600.
D. This system has a default color depth of 16 and a default display resolution of
1024x768.
E. This system has a default color depth of 16 and a default display resolution of
1152x900.
F. This system has a default color depth of 24 and a default display resolution of
1152x900.
Answer: E
QUESTION 186
You have just configured all SPARC-based systems on the Certkiller .com network to
boot from the same device aliases. You now want to change the boot device order
from vxdisk net to rootdisk net.
What should you do?
Answer: E
QUESTION 187
Which of the following statements regarding the svccfg command is TRUE?
Answer: A
Incorrect Answers:
A: The svcadm command is used to modify the contents of the service configuration
repository.
C: The svcs command displays the service state of all service instances.
QUESTION 188
A Certkiller .com user named Amy Walsh complains that a script run by her
department is reporting an error. You discover that the script checks who is logged
in. You want to verify that the file used by the who command is present on the
system.
What should you do?
Answer: C
QUESTION 189
You need to upgrade a SPARC-based server that is running Solaris 8 OS to Solaris
10 OS. You need to accomplish this task with the least amount of downtime and you
must be able to rollback the system if the upgrade is not satisfactory.
What should you do?
Answer: D
QUESTION 190
Which of the following statements regarding man pages is TRUE?
A. SUNWCprog is the minimum Solaris OS software cluster that contains the man pages.
B. SUNWClib is the minimum Solaris OS software cluster that contains the man pages.
C. SUNWCman is the minimum Solaris OS software cluster that contains the man pages.
D. SUNWCreq is the minimum Solaris OS software cluster that contains the man pages.
E. SUNWCXall is the minimum Solaris OS software cluster that contains the man pages.
F. SUNWCall is the minimum Solaris OS software cluster that contains the man pages.
Answer: A
QUESTION 191
Certkiller .com obtains a new SPARC-based system with a monitor and keyboard.
You need to install Solaris 10 OS on the new system. However, the installation
begins in CLI mode. You verify that you entered the correct command.
What is the probable cause of this problem?
Answer: D
QUESTION 192
When you view the contents of a directory on a Solaris system you notice that some
files are attributed to a user ID number rather than a user name. What is the cause
of this problem?
Answer: C
QUESTION 193
You suspect that an unprivileged user used logged in as the superuser to execute
certain commands on a Solaris system. When you consult the log file for the su(1)
command, you receive the output shown in the following exhibit:
SU 11/05 10:49 + pts/6 mhamm-root
SU 11/05 10:53 + pts/5 awalsh-root
SU 11/05 10:53 + pts/3 mhamm-root
SU 11/05 11:02 + pts/1 rallen-mhamm
Which of the following statements regarding this output are TRUE if the log file has
not been tampered with? (Select TWO options.)
Answer: C, F
QUESTION 194
Which of the following commands can you use to boot a SPARC-based system?
(Select THREE options.)
A. ok boot net:rarp
B. ok boot cdrom -as
C. ok boot net
D. ok boot -a
E. ok reboot
Answer: A, B, C
QUESTION 195
You receive the output as shown in the following exhibit:
# lpstat -t hp3005n
scheduler is not running
no system default destination
device for hp3005n: /dev/term/a
UX:lpstat: ERROR: The LP print service isn't running or can't
be reached.
TO FIX: Your request can't be completely handled
without the LP print service. If this
problem continues, get help from your system
administrator.
Which of the following statements regarding this output are TRUE?
Answer: B, E
QUESTION 196
When you run the # svcadm milestone command on a Solaris system, you receive
the output as shown in the following exhibit:
# svcadm milestone -d svc:/milestone/multi-user:default
Which of the following statements regarding the output in this exhibit are TRUE?
(Select TWO options.)
Answer: B, D
QUESTION 197
Which of the following FMRI formats can you use to control the rlogin service?
A. /var/adm/rlogin
B. /etc/default/login
C. svcs:/network/login
D. rlogin:var/sadm
Answer: B
QUESTION 198
Which of the following are used to determine whether an rlogin attempt as root will
succeed or not?
Answer: A
QUESTION 199
Certkiller .com suffers a power outage. When power is restored a Solaris system fails
to mount a user's home directory. You suspect that the power outage may have
corrupted the superblock in the /dev/dsk/c0t0d0s3 file system. You need to locate
the alternative backup superblocks.
What should you do?
Answer: B
QUESTION 200
You need to unmount the /prod/inv file system for maintenance purposes. However,
when you try to unmount the file system, you receive the error message shown in the
following exhibit:
umount: /prod/inv busy
You suspect that some Certkiller .com users are still using the file system. You want
to determine who these users are. What should you do?
Answer: A
QUESTION 201
You receive the output as shown in the following exhibit:
# logins -l miahamm
miahamm 1001 other 1
# ls -al /tmp/ckdata
-rw-r--r-- 1 root other 0 Oct 16 14:27 /tmp/ckdata
You need to prevent the user miahamm from reading the /tmp/ckdata file.
What should you do?
Answer: B
QUESTION 202
You receive complains from Certkiller .com users that they cannot access a as a
SPARC-based system. When you use the boot command to reboot the system you
receive the message shown in the following exhibit:
Rebooting with command: boot
Boot device: /sbus@1f,0/SUNW,fas@e,8800000/sd@0,0 File and args:
SunOS Release 5.10 Version Generic 64-bit
Copyright 1983-2005 Sun Microsystems, Inc. All rights reserved.
Use is subject to license terms.
Cannot open '/etc/path_to_inst'
Program terminated
You need to ensure the system boots properly. What should you do? (Each correct
option is a complete solution. Select TWO options.)
A. You should reboot the system using the boot /etc/path_to_inst command.
B. You should reboot the system using the boot -ars command.
C. You should reboot the system using the boot -s command.
D. You should reboot the system using the boot -r command.
Answer: B, D
QUESTION 203
Match the format utility keywords to the correct description.
Answer:
QUESTION 204
You are troubleshooting the boot process on a SPARC-based system. You want the
system initialization to stop at run level 2 when you reboot the system. What should
you do?
Answer: C
QUESTION 205
A file system on a Solaris 10 OS system has been corrupted. You need to restore the
file system. What should you do?
Answer: A
QUESTION 206
Match the signal names to its associated process signal number.
Answer:
QUESTION 207
Certkiller .com obtains a new SPARC-based system. You need to install Solaris 10
OS in text mode on the new system.
What should you do?
Answer: D
QUESTION 208
A kernel engineer has developed a new kernel that he wants you to test. You need to
test the new kernel by booting your system using this kernel. What should you do?
Answer: D
QUESTION 209
You are employed as a Solaris administrator at Certkiller .com. At 3 P.M. you
manually created a snapshot of the file system that holds the user data on s system
named Certkiller -WS200. The next morning verify that the backup of the
snapshots, which began at 8 P.M, completed successfully. A Certkiller .com user then
accidentally deleted a file that was last worked on at 5.30 P.M. the previous day and
need it restored. Where will you locate this last version of the file?
Answer: D
QUESTION 210
You want to use WAN boot installations to install Solaris 10 OS on systems. The
systems are located in various sites on the Certkiller .com network. You want to
ensure that the integrity of the installation is protected.
What should you do? (Select TWO options.)
Answer: B, C
QUESTION 211
A portion of the system log is shown in the following exhibit:
Svc: /application/print/server:default (LP print server)
State: disabled since Mon 21 Mar 2005 13:52:26 PM MST
Answer: B, D
QUESTION 212
The Certkiller .com network contains several Solaris OS systems. The company
obtains a new SPARC-based system. You are required to install a Solaris 10 OS on
the new system.
You need to ensure that the Web server on the Certkiller .com network responds to
the new system's WAN boot client requests. What should you do?
Answer: B
QUESTION 213
Match the boot phases of the Solaris OS boot process to the correct description.
Answer:
QUESTION 214
A Certkiller .com technician has installed Solaris 10 OS on a system before going on
vacation. You need to determine what the technician has installed on the system.
What should you do?
Answer: C
QUESTION 215
When you run the df-F ufs -k command on a Solaris system, you receive the
output as shown in the following exhibit:
Filesystem kbytes used avail capacity Mounted on
/dev/dsk/c0t0d0s0 192423 83078 90103 48% /
/dev/dsk/c0t0d0s6 1924230 1023921 900783 54% /csv
/dev/dsk/c0t0d0s8 1192420 46429 1126743 27% /var
/dev/dsk/c0t0d0s5 1984230 663 1924041 1% /export
/dev/dsk/c0t0d0s7 3806230 819633 2948535 22% /opt
You need to backup of the / (root) file system to the /dev/rmt/0 tape device. You
want to accomplish this task without bringing the system to single-user mode and
without unmounting the / (root) file system.
What should you do?
A. You should run the ufsdump 0uf /dev/rmt/0 'fssnap -o bs=/opt,raw /'
command.
B. You should run the ufsdump 0uf /dev/rmt/0 'fssnap -o bs=/var/tmp,raw /'
command.
C. You should run the ufsdump 0uf /dev/rmt/0 'snapfs -o bs=/var/tmp /'
command.
D. You should run the ufsdump 0uf /dev/rmt/0 'snapfs -o bs=/export,raw /'
command.
Answer: A
QUESTION 216
A Certkiller .com technician ran the # lpadmin -d printerE command to set the
default destination printer on a Solaris system.
Which of the following statements regarding the default destination printer is
TRUE?
Answer: D
QUESTION 217
Which of the following statements regarding entries in the /dev/dsk and /dev/rdsk
directories are TRUE? (Select THREE options.)
A. By default, every Solaris OS disk device will have an entry in the /dev/dsk and
/dev/rdsk directories.
B. By default, logical disk devices will have entries in the /dev/dsk directory.
C. By default, block disk devices will have entries in the /dev/rdsk directory.
D. By default, physical devices will have entries in the /dev/dsk directory.
E. By default, logical character disk devices will have entries in the /dev/rdsk directory.
Answer: A, B, E
QUESTION 218
Match the logical disk components to the correct description.
Answer:
QUESTION 219
You need to re-install Solaris OS on a large number of systems on the Certkiller .com
network. The systems installations must be hands off and must be tailored to the
task for which the system will be used.
What should you do?
Answer: D
QUESTION 220
During routine maintenance you discover that a Certkiller .com user named Rory
Allen is using excessive disk space in his home directory which is located on the
c0t0d0s3 device. You want to encourage Rory Allen to reduce disk space usage. You
run the quot -f /dev/dsk/c0t0d0s3 to show Rory Allen that he is using more disk
space than any other user.
You now want to help Rory Allen to decide which files and directories he should
back up.
What should you do?
Answer: A
QUESTION 221
Arrange the process phases of a SPARC-based system in the order that they would
occur in.
Answer:
QUESTION 222
Certkiller .com issues a new security policy which states that root logins should only
be allowed on the console of a system. You need to ensure that your system complies
with the new security policy.
What should you do?
Answer: B
QUESTION 223
A portion of a login script is shown in the following exhibit:
# logins -l amywalsh
mhamm 1001 other 1
# logins -l root
root 0 root 0 Super-User
# ls -l /etc/passwd
-rw-r--r-- 1 root sys 726 Jun 14 15:45 /etc/passwd
Answer: C, D
QUESTION 224
When you run the # fssnap -i command you receive the output shown in the
following exhibit:
# fssnap -i
0 /export/home
What would the result be if you run the # /usr/lib/fs/ufs/fssnap -i
/export/home command?
A. You will create a new fssnap image of the /export/home file system.
B. The content from the /export/home snapshot will be used as input for the fssnap
command.
C. You will receive detailed information about the /export/home snapshot.
D. A read-only version of the /export/home file system will be mounted.
Answer: C
QUESTION 225
Certkiller .com has an x86-based system that is configured to use Xorg to manage the
system hardware. You want to reconfigure the system to use Xsun to manage the
system hardware.
What should you do?
Answer: C
QUESTION 226
Certkiller .com issues a new security policy which states that all user passwords must
contain at least two capital letters and one number. You need to ensure that your
system complies with the new security policy.
What should you do?
A. You should modify the /etc/default/passwd file to comply with the new policy.
B. You should modify the /etc/default/shadow file to comply with the new policy.
C. You should modify the /etc/passwd file to comply with the new policy.
D. You should modify the /etc/shadow file to comply with the new policy.
Answer: A
QUESTION 227
You receive the output shown in the following exhibit:
$ id
uid=miahamm( Certkiller -sr01) gid=1(other)
$ ls -al /etc/data
-r-------- 1 root other 394 Jul 12 15:45 /etc/data
$ cat /etc/data
cat: cannot open /etc/data
You need to ensure that both the root user and user miahamm can read /etc/data.
What should you do? (Select THREE options.)
Answer: C, D, E
QUESTION 228
You have created a full backup of the file system that is mounted on /export/home.
You logon as the root user and perform an interactive restore of the
/export/home/amywalsh/.profile file with the /var/tmp directory as the current
working directory. At the end of the restore process you set owner/mode for '.'
when prompted.
Which of the following statements regarding this restore operation is TRUE?
A. This action will result in the owner and mode of /export/home being set to the owner
and mode of /export/home before the backup was performed.
B. This action will result in the owner and mode of /var/tmp/amywalsh being set to the
current owner and mode of /export/home/amywalsh.
C. This action will result in the owner and mode of /export/home on the backup tape
being updated with the current owner and mode values of /export/home.
D. This action will result in the owner and mode of /var/tmp being set to the owner and
mode of /export/home before the backup was performed.
Answer: D
QUESTION 229
Sun Microsystems has recently released a patch that includes updates for the
SunMC (Sun Management Center). The patch number is 251206-02. You need to
determine if this patch has already been applied to the SunMC server.
What should you do?
Answer: A
QUESTION 230
A Certkiller .com user named Amy Walsh complains that she is unable to print to a
printer that is attached to a print server. You log onto the print server and then run
the svcs -a command. The output from this command is shown in the following
exhibit:
# svcs -a |grep 'print'
disabled 14:34:06 svc:/application/print/server:default
online 14:34:38 svc:/application/print/cleanup:default
offline 14:34:24 svc:/application/print/ipp-listener:default
offline 14:35:32 svc:/application/print/rfc1179:default
You need to resolve this problem. What should you do?
Answer: A
QUESTION 231
The Certkiller .com network contains a print server on which four printers are
installed. The four printers are named HP3005D, HP3005X, HP4250N and
HP4350N. You need to define a print class name ckprint that comprises all four
printers. You want the ckprint class to send the print jobs to the HP3005D printer
and then to the HP3005X printer followed by the HP4250N and HP4350N printers.
What should you do? (To answer, arrange the appropriate commands in the correct
order to accomplish this task. You do not need to use all of the available options.)
Answer:
QUESTION 232
You receive the output shown in the following exhibit:
daustin@ Certkiller -ws202# ftp Certkiller -ws200
Connected to Certkiller -ws200. Certkiller .com.
220 Certkiller -ws200 FTP server ready.
Name ( Certkiller -ws200:root): root
331 Password required for root.
Password: root
530 Login incorrect.
Login failed.
ftp>
Which of the following statements regarding the output in this exhibit are TRUE?
(Select TWO options.)
A. The user daustin is trying to log in to Certkiller -WS200 with the root id.
B. The password for the root user on Certkiller -WS202 is set as "root".
C. The user daustin is trying to use ftp to connect to Certkiller -WS200.
D. The user daustin has successfully logged in to Certkiller -WS202.
E. The user daustin is NOT permitted to log in to Certkiller -WS200.
Answer: A, E
QUESTION 233
The /etc/group file on a Solaris system is configured to store the encoded group
password in the file's second field. If the passwords are placed on certain group
A. The users who are secondary members of the group will need to use the group
password if they want to access the group.
B. The users who are primary members of the group will need to use the group password
if they want to access the group.
C. Only users who are members of a group will be able to access that group.
D. The users who are NOT members of the group will be able to access the group if they
know the password.
Answer: B
QUESTION 234
You need to determine which users are physically connected to a Solaris system.
You run the # who command and receive the output shown in the following exhibit:
$ who
daustin console Jul 14 06:36
rallen pts/8 Jul 11 14:121 (:0.0)
mhamm term/a Jul 14 07:09
klang pts/6 Jul 14 07:37 (physical)
Which of the following statements regarding the output in this exhibit is TRUE?
A. The users daustin and mhamm are currently connected to the system.
B. Only the user klang is currently connected to the system.
C. The users daustin, mhamm, and klang are currently connected to the system.
D. Only the user rallen is currently connected to the system.
Answer: A
QUESTION 235
You are troubleshooting a headless SPARC-based server. You want to check the
power-on self-test (POST) information while it executes. What should you do?
Answer: B