You are on page 1of 13

ISO Flanges and Fittings

Tubulated ISO Flanges Manufactured from stainless steel, these flanges are suitable for welding to stainless steel tubes or bellows for the manufacture of special pumping lines or fittings. Tubulated flanges are only available with the claw clamp sealing arrangement. ISO Components The ISO flange system follows the same sealing principles of the smaller KF flange range. The flanges are sealed by an o-ring that is held in a carrier which locates in a counterbore in both flanges. There are two basic flange forms, clamped and bolted. Fixed and rotatable bolted flanges are available. The claw clamp system allows mating flanges to be joined in any orientation. Centering Trapped O-rings Used to make the actual vacuum seal, the Viton or Nitrile o-ring is held in place on a stainless steel carrier that stops the o-ring distorting when the seal is made. The design of the carrier means that it is impossible to over tighten the o-ring. The use of Viton means that the seal is bakeable to +150 C. ISO Flange Claw Clamps These are used to make the seal. Double claw clamps are used to join two clamp style flanges together. Single claw clamps allow clamp style flanges to be bolted to mating components such as gate valves or chamber ports.

ISO Flanges and Fittings

Introduction to ISO Flanges uick, easy, and repeatable vacuum sealing Q Flanges and fittings in NW63, 80, 100 160, 200, 250, 320, 400, 500 and 600 ISO sizes akeable to 150 C (up to 200 C for limited B use) ubulated flanges suitable for welding to T stainless steel tube daptors allow connection to KF or CF A 304 stainless steel Vacuum rated to 1x10-8 mbar Wide range of elbows, tees, crosses and flexible connectors available Claw clamp and bolted flange styles Leak tight to 1x10-10 mbar.l.s-1 ISO Flanges - Bolted or Clamped There are two different types of ISO flange. Bolted flanges have a set of bolt holes to allow flanges to be joined together. Fixed and rotatable bolted styles are available. Claw clamp flanges use detachable claw clamps to hold the two mating flanges together. The use of the claw clamps means that components can be joined together in any relative orientation.

016

www.vgscienta.com

ISO Steel Double Claw Clamps, Stainless Steel


Size NW80 NW100 NW160 NW200 NW250 NW320 NW400 NW500 NW630 ISO Steel Double Claw Clamp Dimensions in mm (Refers to Number single unit) A B per Flange Order Code 60 60 60 60 60 60 75 75 75 85 M10 M10 M10 M10 M10 M10 M12 M12 M12 M12 4 4 4 4 6 6 8 8 12 12 KS60DCS KS60DCS KS60DCS KS60DCS KS60DCS KS60DCS KS75DCS KS75DCS KS75DCS KS85DCS
ISO Flanges

NW63

Double claw clamp, for use with ISO flanges of sizes ISO63 to ISO630. Material is stainless steel.

ISO Steel Wall Clamps, Stainless Steel


ISO Steel Wall Clamps Size NW80 NW100 NW160 NW200 NW250 NW320 NW400 NW500 NW630 A 22.5 22.5 22.5 23.0 23.0 23.0 36.5 36.5 36.5 41.5 Dimensions in mm B C M8 M8 M8 M10 M10 M10 M12 M12 M12 M12 35 35 35 35 35 35 50 50 50 55 Order Code KS22WCS KS22WCS KS22WCS KS23WCS KS23WCS KS23WCS KS36WCS KS36WCS KS36WCS KS41WCS

NW63

Single claw wall clamp, for use with ISO flanges of sizes ISO63 to ISO630. Material is stainless steel.

www.vgscienta.com

017

ISO Fixed Bolted Blank Flanges, Stainless Steel


Size NW63 NW80 NW100 NW160 NW200 NW250 NW320 NW400 NW500 NW630 ISO Fixed Bolted Blank Flanges A 130 145 165 225 285 335 425 510 610 750 B 110 125 145 200 260 310 395 480 580 720 C 12 12 12 16 16 16 20 20 20 24 D x No. 9x4 9x8 9x8 11x8 11x12 11x12 14x12 14x16 14x16 14x20 Order Code KS63BS KS80BS KS100BS KS160BS KS200BS KS250BS KS320BS KS400BS KS500BS KS630BS

ISO Flanges

Fixed blank bolted style ISO flange. Available in sizes ISO63 to ISO630. Material is stainless steel.

ISO Fixed Bolted Bored Flanges, Stainless Steel


Size NW63 NW80 NW100 NW160 NW200 NW250 NW320 NW400 NW500 NW630 ISO Fixed Bolted Bored Flanges A B D x C No. E 9x4 9x8 9x8 70 83 F(1) Order Code 76 89 KS63BBS KS80BBS KS100BBS KS160BBS KS200BBS KS250BBS KS320BBS KS400BBS KS500BBS KS630BBS

130 110 12 145 125 12 165 145 12

102 108

225 200 16 11x8 153 159 285 260 16 11x12 213 219 335 310 16 11x12 261 267 425 395 20 14x12 318 324 510 480 20 14x16 400 406 610 580 20 14x16 502 508 750 720 24 14x20 654 660

(1) Tube outside diameter.

Fixed bored bolted style ISO flange. Available in sizes ISO63 to ISO630. Material is stainless steel.

018

www.vgscienta.com

ISO Rotatable Bolt Rings, Stainless Steel


Size NW63 NW80 NW100 NW160 NW200 NW250 NW320 NW400 NW500 A 130 145 165 225 285 335 425 510 610 ISO Rotatable Bolt Rings Dimensions in mm E x B C D No. 110 125 145 200 260 310 395 480 580 12 12 12 16 16 16 20 20 20 96 110 130 181 9x4 9x8 9x8 11x8

ISO Flanges

Order Code KS63RS KS80RS KS100RS KS160RS KS200RS KS250RS KS320RS KS400RS KS500RS

241 11x12 291 11x12 371 14x12 451 14x16 551 14x16

ISO flange rotatable bolt ring set. Each set contains the bolt ring flange and the retaining insert ring. Available in sizes ISO63 to ISO500. Material is stainless steel.

www.vgscienta.com

019

ISO Trapped Centering Rings, Stainless Steel with Viton O-ring, Aluminium with Viton O-ring and Aluminium with Nitrile O-ring
ISO Flanges

ISO Centering Rings - Viton + Stainless Steel Size NW40 NW63 NW80 NW100 NW160 NW200 NW250 NW320 NW400 NW500 NW630 A 8 8 8 8 8 8 8 14 14 14 14 Dimensions in mm B C D 3.9 3.9 3.9 3.9 3.9 3.9 3.9 5.6 5.6 5.6 5.6 41 70 83 102 153 213 261 318 400 501 651 63 94 109 128 179 239 287 358 440 541 691 Order Code KS40VCS KS63VCS KS80VCS KS100VCS KS160VCS KS200VCS KS250VCS KS320VCS KS400VCS KS500VCS KS630VCS

ISO flange trapped centering ring and Viton or Nitrile sealing o-ring. Available in sizes NW40 to ISO630. Centering ring material is stainless steel or aluminium.
ISO Centering Rings - Viton + Aluminium Dimensions in mm A B C D 8 8 8 8 8 8 8 14 14 14 14 3.9 3.9 3.9 3.9 3.9 3.9 3.9 5.6 5.6 5.6 5.6 41 70 83 102 153 213 261 318 400 501 651 63 94 109 128 179 239 287 358 440 541 691 Order Code KS40VCA KS63VCA KS80VCA KS100VCA KS160VCA KS200VCA KS250VCA KS320VCA KS400VCA KS500VCA KS630VCA ISO Centering Rings - Nitrile + Aluminium A 8 8 8 8 8 8 8 14 14 14 14 Dimensions in mm B C D 3.9 3.9 3.9 3.9 3.9 3.9 3.9 5.6 5.6 5.6 5.6 41 70 83 102 153 213 261 318 400 501 651 63 94 109 128 179 239 287 358 440 541 691 Order Code KS40NCA KS63NCA KS80NCA KS100NCA KS160NCA KS200NCA KS250NCA KS320NCA KS400NCA KS500NCA KS630NCA

Size NW40 NW63 NW80 NW100 NW160 NW200 NW250 NW320 NW400 NW500 NW630

Size NW40 NW63 NW80 NW100 NW160 NW200 NW250 NW320 NW400 NW500 NW630

020

www.vgscienta.com

ISO Blank Claw Clamp Flanges, Stainless Steel


Size NW63 NW80 NW100 NW160 NW200 NW250 NW320 NW400 NW500 NW630 ISO Blank Claw Clamp Flanges Dimensions in mm A B C D 95 110 130 180 240 290 370 450 550 690 90 105 125 175 235 285 365 445 545 685 12 12 12 12 12 12 17 17 17 22 70 83 102 153 213 261 318 400 501 651 Order Code KS63BCS KS80BCS KS100BCS KS160BCS KS200BCS KS250BCS KS320BCS KS400BCS KS500BCS KS630BCS

ISO Flanges

Blank claw clamp style ISO flange. Available in sizes ISO63 to ISO630. Material is stainless steel.

ISO Bored Claw Clamp Flanges, Stainless Steel


ISO Bored Claw Clamp Flanges Size A 95 110 130 180 240 290 370 450 550 690 Dimensions in mm B C D E 90 105 125 175 235 285 365 445 545 685 12 12 12 12 12 12 17 17 17 22 70 83 102 153 213 261 318 400 501 651 76 89 108 159 219 267 324 406 508 660 Order Code KS6BBCS KS8BBCS KS10BBCS KS16BBCS KS20BBCS KS25BBCS KS32BBCS KS40BBCS KS50BBCS KS63BBCS

NW63 NW80 NW100 NW160 NW200 NW250 NW320 NW400 NW500 NW630

Bored claw clamp style ISO flange. Available in sizes ISO63 to ISO630. Material is stainless steel.

www.vgscienta.com

021

ISO to KF Tubulated Adaptors, Stainless Steel


ISO/KF Tubulated Adapters Size ISO63/KF25 ISO63/KF40 ISO100/KF40 ISO80/KF40 ISO63/KF50 ISO80/KF50 ISO100/KF50 Dimensions in mm A B C D(1) 95 95 130 110 95 110 130 40 55 55 55 75 75 75 50 50 50 118 50 118 50 28 45 45 45 57 57 57 Order Code KS63K25S KS63K40S KS10K40S KS80K40S KS63K50S KS80K50S KS10K50S

ISO Fittings

(1) Dimension D is the nominal tube OD. Actual tube OD may vary depending on tube availability.

Tubulated adaptors, terminating in one quick release Klein flange and one ISO flange. Material is stainless steel. Special lengths available on request.

ISO Claw Clamp Tubulations Half Nipple, Stainless Steel


Size NW63 NW80 NW100 NW160 NW200 NW250 NW320 NW400 NW500 ISO Claw Clamp Tubulations Dimensions in mm A B C 95 110 130 180 240 290 370 450 550 70 83 102 153 213 261 318 400 501 100 100 100 100 100 100 100 100 100 Order Code KS63CTS KS80CTS KS10CTS KS16CTS KS20CTS KS25CTS KS32CTS KS40CTS KS50CTS

Claw clamp style ISO flange half nipple, available in sizes ISO63 to ISO500. Material is stainless steel.

022

www.vgscienta.com

ISO Elbows, Stainless Steel


Size NW63 NW80 NW100 NW160 NW200 NW250 ISO Elbows Dimensions in mm A B C 95 110 130 180 240 290 88 98 108 138 178 208 76 89 108 159 219 267 Order Code KSE63S KSE80S KSE100S KSE160S KSE200S KSE250S

ISO Fittings

90 degrees elbow terminating in two claw clamp style ISO flanges of the same size. Available in sizes from ISO63 to ISO250. Material is stainless steel.

ISO 45 Elbows, Stainless Steel


ISO 45 Elbows Size NW63 NW80 NW100 NW160 NW200 NW250 A 95 110 130 180 240 290 Dimensions in mm B C 76 89 108 159 219 267 82 100 128 247 178 208 Order Code KSE463S KSE480S KSE4100S KSE4160S KSE4200S KSE4250S

45 degrees elbow terminating in two claw clamp style ISO flanges of the same size. Available in sizes from ISO63 to ISO250. Material is stainless steel.

www.vgscienta.com

023

ISO Straight Connectors (Full Nipples), Stainless Steel


ISO Straight Connectors Size NW63 NW80 NW100 NW160 NW200 NW250 NW320 NW400 NW500 Dimensions in mm A B(1) C 95 110 130 180 240 290 370 450 550 70 83 102 153 213 261 318 400 501 100 100 100 100 100 100 200 200 200 Order Code KS63SCS KS80SCS KS10SCS KS16SCS KS20SCS KS25SCS KS32SCS KS40SCS KS50SCS

ISO Fittings

(1) Dimension B is ID.

Straight connector terminating in two claw clamp style ISO flanges of the same size. Available in sizes ISO63 to ISO500. Material is stainless steel.

ISO Tubulated Reducing Adaptors, Stainless Steel


ISO Tubulated Reducing Adaptors Size NW80/63 NW100/63 NW160/63 NW200/63 NW250/63 NW100/80 NW160/80 NW200/80 NW250/80 NW160/100 NW200/100 (1) Dimension C is ID. NW250/100 NW200/160 NW250/160 NW250/200 Dimensions in mm A B C(1) D 110 130 180 240 290 130 180 240 290 180 240 290 240 290 290 95 95 95 95 95 110 110 110 110 130 130 130 180 180 240 70 70 70 70 70 83 83 83 83 102 102 102 153 153 213 50 50 50 90 90 50 50 90 90 50 90 90 90 90 90 Order Code KS80R63S KS10R63S KS16R63S KS20R63S KS25R63S KS10R80S KS16R80S KS20R80S KS25R80S KS16R10S KS20R10S KS25R10S KS20R16S KS25R16S KS25R20S

Reducing adaptors, terminating in two different size claw clamp style ISO flanges. Available in sizes ISO80/63 to ISO250/200. Material is stainless steel.

024

www.vgscienta.com

ISO Flexible Hoses, Stainless Steel


ISO Flexible Hoses Size NW63 NW63 NW63 NW63 NW80 NW80 NW80 NW80 NW100 NW100 NW100 NW100 NW160 NW160 NW160 NW160 Dimensions in mm A B 95 95 95 95 110 110 110 110 130 130 130 130 180 180 180 180 250 500 750 1000 250 500 750 1000 250 500 750 1000 250 500 750 1000 Order Code SFX63K25 SFX63K50 SFX63K75 SFX63K10 SFX80K25 SFX80K50 SFX80K75 SFX80K10 SFX10K25 SFX10K50 SFX10K75 SFX10K10 SFX16K25 SFX16K50 SFX16K75 SFX16K10

ISO Fittings

Flexible hydroformed hoses terminating in claw clamp style ISO flanges of the same size. Available in lengths from 250 mm to 1000 mm and flange sizes from ISO63 to ISO160. Material is stainless steel.

ISO Hydroformed Bellows Connectors, Stainless Steel


Size NW63 NW80 NW100 NW160 NW200 NW250 ISO Hydroformed Bellows A 95 110 130 180 240 290 Dimensions in mm B C 127 127 127 220 220 220 106 106 107 170 170 170 Order Code SFX63SS SFX80SS SFX100SS SFX160SS SFX200SS SFX250SS

Hydroformed bellows terminating in two claw clamp style ISO flanges of the same size. Available in sizes ISO63 to ISO250. This will allow connection of slightly misaligned components. Material is stainless steel.

www.vgscienta.com

025

ISO to KF Reducing Tees, Stainless Steel


Size NW63/16 NW63/25 NW63/40 NW63/50 NW100/25 NW100/40 NW100/50 NW160/40 NW160/50 ISO to KF Reducing Tees A 95 95 95 95 130 130 130 180 180 Dimensions in mm B C D 30 40 55 75 40 55 75 55 75 204 204 204 204 260 260 260 320 320 58 79 76 92 98 95 111 121 136 Order Code S63K16TS S63K25TS S63K40TS S63K50TS S10K25TS S10K40TS S10K50TS S16K40TS S16K50TS

ISO Fittings

Unequal tee pieces the main axis terminating in two claw clamp style ISO flanges of the same size and the half axis terminating in a quick release Klein flange. Available in sizes from ISO63/KF16 to ISO160/KF50. Material is stainless steel.

ISO to KF Reducing Crosses, Stainless Steel


Size NW63/25 NW63/40 NW63/50 NW100/25 NW100/40 NW100/50 NW160/40 NW160/50 ISO to KF Reducing Crosses A 95 95 95 95 130 130 130 180 180 Dimensions in mm B C D 30 40 55 75 40 55 75 55 75 102 102 102 102 130 130 130 160 160 116 158 152 184 196 190 222 242 272 Order Code SX63K16S SX63K25S SX63K40S SX63K50S SX10K25S SX10K40S SX10K50S SX16K40S SX16K50S

NW63/16

Four way cross piece with unequal length axes terminating in claw clamp style ISO flanges. Each axis will terminate in a different size flange. Available in sizes from ISO63/16 to ISO160/50. Material is stainless steel.

026

www.vgscienta.com

ISO Tees, Stainless Steel


ISO Tees Size NW63 NW80 NW100 NW160 NW200 NW250 Dimensions in mm A B C D(1) 95 110 130 180 240 290 176 196 216 276 356 416 88 98 108 138 178 208 76 89 108 159 219 267 Order Code KST63S KST80S KST100S KST160S KST200S KST250S

ISO Fittings

Tee piece terminating in three claw clamp style ISO flanges of the same size. Available in sizes from ISO63 to ISO250. Material is stainless steel.

(1) Dimension D is the nominal tube OD. Actual tube OD may vary depending on tube availability.

ISO Unequal Tees, Stainless Steel


Size NW80/63 NW100/63 NW100/80 NW160/63 NW160/80 NW160/100 NW200/63 NW200/80 NW200/100 NW200/160 A 110 130 180 ISO Unequal Tees Dimensions in mm B C D E(1) 95 95 95 95 107 111 130 134 131 160 163 161 168 98 108 108 138 138 138 178 178 178 178 89 108 108 159 159 159 219 219 219 219 Order Code KS80T63S KS10T63S KS10T80S KS16T63S KS16T80S KS16T10S KS20T63S KS20T80S KS20T10S KS20T16S (1) Dimension E is the nominal tube OD. Actual tube OD may vary depending on tube availability.

130 110 180 110 180 130 240 95 240 110 240 130 240 180

Unequal tee pieces with the main axis terminating in two claw clamp style ISO flanges of the same size and the half axis terminating in a smaller sized ISO flange. Available in sizes from ISO80/63 to ISO200/160. Material is stainless steel.

www.vgscienta.com

027

ISO 4-Way Crosses, Stainless Steel


Size NW63 NW80 NW100 NW160 NW200 NW250 A 95 110 130 180 240 290 ISO 4-Way Crosses Dimensions in mm B C D(1) 176 196 216 276 356 416 88 98 108 138 178 208 76 89 108 159 219 267 Order Code KSX63S KSX80S KSX100S KSX160S KSX200S KSX250S

ISO Fittings

(1) Dimension D is the nominal tube OD. Actual tube OD may vary depending on tube availability.

Four way cross piece with equal length axes terminating in claw clamp style flanges of the same size. Available in sizes from ISO63 to ISO250. Material is stainless steel.

ISO Unequal 4-Way Crosses, Stainless Steel


ISO Unequal 4-Way Crosses Size NW80/63 NW100/63 NW100/80 NW160/63 NW160/80 A 110 130 130 180 180 Dimensions in mm B C D E(1) 95 95 110 95 110 130 180 95 107 111 130 134 131 168 98 108 108 138 138 138 178 89 108 108 159 159 159 219 Order Code SX80R63S SX10R63S SX10R80S SX16R63S SX16R80S SX16R10S SX20R16S

NW160/100 180 NW200/160 240

(1) Dimension E is the nominal tube OD. Actual tube OD may vary depending on tube availability.

Four way cross piece with unequal length axes terminating in claw clamp style ISO flanges. Each axis will terminate in a different sized flange. Available in sizes from ISO80/63 to ISO200/160. Material is stainless steel.

028

www.vgscienta.com

You might also like