Professional Documents
Culture Documents
Laser Diodes
Page
....................... FP Laser Diodes, VIS & NIR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 FP Laser Diodes, 1310 & 1550nm . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 Ridge Waveguide Laser Diodes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 Tapered Cavity Laser Diodes & Amplifiers . . . . . . . . . . . . . . . . . . . . . . .6 DFB Laser Diodes, VIS & NIR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8 DFB Laser Diodes, 1310 & 1550nm . . . . . . . . . . . . . . . . . . . . . . . . . . . .9 DBR Laser Diodes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10 Broad Area Laser Diodes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12 Laser Diode Bars & Arrays . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14 Pump Engines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
....................... Coaxial In-Line FP Laser Diodes, VIS & NIR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18 FP & DFB Laser Diodes, 1310nm & 1550nm . . . . . . . . . . . . . . . . . . . . .19 DFB Laser Diodes, 1270nm - 1610nm . . . . . . . . . . . . . . . . . . . . . . . . .20 Butterfly Packaged Laser Diodes SM 1550nm <50mW For Digital Applications . . . . . . . . . . . . . . . . . . . . .22 SM 1310 & 1550nm <50mW For Analogue Applications . . . . . . . . . . . .24 SM NIR >100mW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39 MM NIR >1000mW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50
18
...........................
54
Low Power Laser Diode And TEC Drivers Manual Controllers - 200 / 300 Series . . . . . . . . . . . . . . . . . . . . . . . . . .54 Manual And IEEE Controllers - 500 Series . . . . . . . . . . . . . . . . . . . . . .55 Manual And IEEE Controllers - 800 / 8000 Series . . . . . . . . . . . . . . . . .55 Laser Diode Mounts And Shielded Connection Cables . . . . . . . . . . . . .56 High Power And Array Drivers CW Diode Driver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57 Pulsed Diode Driver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57 CW OEM Diode Driver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58 Pulsed OEM Diode Driver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58
Laser 2000 (UK) Ltd. Britannia House Denford Road Ringstead Kettering Northants NN14 4DF
Laser Diodes
Laser Diodes
Laser 2000 provides a wide range of visible and near infrared free-space emitting laser diodes. Laser diodes are provided at wavelengths from 635nm up to 980nm and beyond, and in peak output powers of 5-50mW. These laser diodes are provided in flat window TO style packages suitable for laboratory use or OEM integration. Their output is divergent and collimation optics should be used either to collect the light or to focus the output into a small area. The laser output power varies with drive current and operating temperature. A fixed current can be used to drive the laser at a constant output power provided that the external case temperature is unvarying. Similarly, varying the drive current can be used to modulate the output power at frequencies as high as 500MHz. Control of the temperature of the laser diode can be achieved using external temperature controllers and mounts. As these laser diode packages are too small to include Peltier effect thermo-electric controllers (TEC), an external TEC is required. Laser 2000 provides laser diode mounts complete with built in TECs and temperature transducers. In this way, the laser temperature may be stabilised with a variation of only 1mK (subject to environmental conditions). Please refer to page 54. The effect of this is to stabilise the laser diode output wavelength. In addition, the output power will remain constant if the laser diode is being driven in constant current mode. Most of the Laser 2000 range of laser diodes also include internal photodiodes. These are built-into the laser package and sit alongside the laser chip on the laser submount. The function of these photodiodes is to monitor the output of the laser from the rear facet of the laser chip itself. The output of the photodiode is accessible from the package pins and can be used to control the output power of the laser in constant power mode. Laser 2000 provides drive electronics that automatically maintain the output power of the laser diode and keep it constant to within 0.05%. These laser diodes are highly susceptible to damage. It is recommended that they only be operated with the Laser 2000 range of current controllers or with the Laser 2000 range of laser diode modules.
For more information on Laser 2000 products visit our website at:
www.laser2000.co.uk
* Bare laser diodes are sold without warranty **Sample data detailed above right
Telephone: 01933 461 666 Fax: 01933 461 699 e-mail: sales@laser2000.co.uk website: www.laser2000.co.uk
Laser Diodes
8 6 4 2
-20C
25C
85C
20
40
60
80
100
= C-13-001-E-B = C-15-001-E-B
C-15-001-E-A C-15-001-E-B
6 (CW) 2 10 1.0 -40 - +85 -40 - +85
www.laser2000.co.uk
Ordering Codes
C
For more information on Laser 2000 products visit our website at:
13 = 1310 15 = 1550
001 = Fabry-Perot
Optical and Electrical Characteristics (Tc=25C) (C-13-001-E-A / B & C-15-001-E-A / B) Parameter Symbol Min. Typ. Max. Test Condition
Slope Efficiency mW / mA C-13-001-E-A C-13-001-E-B C-15-001-E-A C-15-001-E-B Threshold Current mA Optical Output Power mW Peak Wavelength C-13-001-E-A / B nm C-15-001-E-A / B Spectral Width nm Forward Voltage V Beam Divergence deg. Rise / Fall Time PD Monitor Current PD Dark Current PD Capacitance ns A A pF SE 0.3 0.2 0.2 0.15 5 1290 1520 100 0.35 0.3 0.25 0.18 12 1310 1550 2 1.2 20 40 6 20 CW, Po=5mW
Ith Po VF // t r / tf Im IDARK Ct
Laser Diode
C-13-001-E-A C-13-001-E-B C-15-001-E-A C-15-001-E-B
Wavelength (nm)
1310 1310 1550 1550
1330 CW, Po=5mW 1580 5 CW, Po=5mW 1.5 CW, Po=5mW CW, Po=5mW,FWHM 0.5 Ibias=Ith ,10-90 % CW,Po=5mW, VRPD=2V 0.1 VRLD=5V 15 VRLD=5V, f=1MHz
Telephone: 01933 461 666 Fax: 01933 461 699 e-mail: sales@laser2000.co.uk website: www.laser2000.co.uk
Laser Diodes
Package Dimensions
2 1
9 14
2.2
0.45
www.laser2000.co.uk
Symbol
Spectral Width (FWHM) Temp. Coeff. Of Wavelength Divergence Parallel (FWHM) Divergence Perpendicular (FWHM) Mode Structure Operating Temperature Reverse Voltage nm nm/K C V TC Tcase VR
Min.
15 -
Typ.
0.3 10 30 Fundamental Mode -
Max.
1 40 0
1.5 A B
Dimensions
A B
SOT01
2.45 3.5
SOT02
3.65 4.55
For more information on Laser 2000 products visit our website at:
Slope Threshold Operating Max. Forward Package Efficiency Current Current Current (IF) Polarisation Type (W/A) (mA) (mA) (mA)
0.8 0.8 0.9 0.8 0.8 0.8 0.8 0.8 0.9 0.9 0.8 0.8 0.8 0.8 0.8 0.7 0.2 60 35 25 50 50 50 50 50 50 50 50 50 50 50 30 30 70 80 60 50 150 150 150 150 150 180 270 150 150 200 200 160 130 200 100 100 100 200 200 200 200 200 300 350 200 200 200 200 200 150 200 TM TM TM TM TM TM TM TE TE TE TE TE TE TE TE TE TE SOT-02 SOT-01 SOT-01 SOT-01 SOT-01 SOT-02 SOT-02 SOT-01 SOT-02 SOT-02 SOT-02 SOT-02 SOT-02 SOT-02 SOT-01 SOT-01 SOT-02
Telephone: 01933 461 666 Fax: 01933 461 699 e-mail: sales@laser2000.co.uk website: www.laser2000.co.uk
Laser Diodes
Package Dimensions
www.laser2000.co.uk
2 1
7.3
6.4
3.2 9
2.2
0.45 14
For more information on Laser 2000 products visit our website at:
General Characteristics at Tamb 25C, Standard Coating (Rf~0,06), For Reference Only Symbol Min. Typ. Max.
Divergence Parallel (FWHM) Divergence Perpendicular (FWHM) Mode Structure Operating Temperature Reverse Voltage C V Tcase VR 15 10 30 Fundamental Mode -
1.5 A B
Dimensions
40 0 A B
SOT01
2.45 3.5
SOT02
3.65 4.55
Output Slope Threshold Operating Max. Forward Package Power Efficiency Current Current Current (IF) Polarisation Type (mW) (W/A) (mA) (mA) (mA)
5 5 100 100 100 100 100 100 100 0.9 0.9 0.9 0.9 0.8 0.8 0.8 0.8 0.8 35 35 50 50 30 30 30 30 30 80 80 200 200 200 200 160 160 160 100 100 200 200 200 200 200 200 200 TM TM TM TM TE TE TE TE TE SOT-01 SOT-01 SOT-01 SOT-01 SOT-01 SOT-01 SOT-01 SOT-01 SOT-01
Telephone: 01933 461 666 Fax: 01933 461 699 e-mail: sales@laser2000.co.uk website: www.laser2000.co.uk
Laser Diodes
Tapered Lasers
Tapered Lasers
GaAs Semiconductor Laser Diodes High output power Excellent beam quality Narrow spectral linewidth Easy coupling into SM fibre
6.8 2.8
Emission 0.4
-0.15
(-)
1.3 2.75
Tapered lasers deliver high output powers whilst maintaining good beam quality for coupling into fibres. These lasers are particularly useful for those applications where high brightness is required. Lasers are grown with an aluminium-free active region using MOVPE and are subsequently micromachined to form to tapered laser cavities. The lasers are provided mounted on open C-mount heatsinks. Typically laser systems built with these lasers achieve up to 3W of output power at wavelengths in the range 735 to 1080nm. The estimated reliability of these laser chips when running at 2W is greater than 2,000 hrs.
www.laser2000.co.uk
Min.
0.8 400 12 0 -
Typ.
2 0.3 0.9 600 35 2750 190 15 28 80 1.5 500 -
Max.
4 800 18 750 40 0
For more information on Laser 2000 products visit our website at:
Polarisation
TM TM TE TE
Package Type
C C C C
Telephone: 01933 461 666 Fax: 01933 461 699 e-mail: sales@laser2000.co.uk website: www.laser2000.co.uk
Laser Diodes
Tapered Amplifiers
Tapered Amplifiers
GaAs Semiconductor Laser Diodes Tunable
These amplifier cavities deliver up to 3W (1 .. 1.5W typically) of output power at wavelengths in the range 735-1080nm. They are provided mounted n a 2.75mm thick C mount for injection seeding for amplification of external solid state sources. The high power allows them to be used as an intermediate amplification stage in frequency conversion applications or to improve signal to noise in detection systems. Tapered amplifiers provide all of the benefits of the tapered laser cavity: high power with excellent beam quality and narrow linewidth. The estimated reliability of these laser chips when running at 2W is greater than 2,000hrs. 6.8 2.8
Emission 0.4
-0.15
(-)
1.3 2.75
www.laser2000.co.uk
For more information on Laser 2000 products visit our website at:
Min.
0 -
Typ.
50 2.75 3 190 28 -
Max.
40 0
Centre Wavelength Gain Max Output Wavelength tolerance Width Amplification Power nm nm nm dB mW
765 780 795 840 915 970 1080 5 5 10 15 6 8 8 30 20 40 50 16 13 13 13 13 13 13 1500 500 500 500 1500 500 500
Operating Current mA
2700 1500 1500 1500 3000 1500 1500
Telephone: 01933 461 666 Fax: 01933 461 699 e-mail: sales@laser2000.co.uk website: www.laser2000.co.uk
Laser Diodes
Package Information Part No.
SOT 9mm x 3.65mm, sealed cap SOT02 available
7.3
6.4
3.2
others
on request
SOT0n
Ground Laser (+) Monitor Photo Diode (+) 1 3 2
1.5
Package Pinout
Recommended Operation Conditions Operational Temp. At Case (Tcase) Max Forward Min Typ Max Current (IF)
EYP-DFB-0860-00150-1500-SOT02-0000 All Others 15C 15C 40C 40C 180mA 230mA
Absolute Maximum Ratings Max. Operational Max . Forward Max. Reverse Temp. At Case (Tc) Current (IF) Voltage (VR)
50C 50C 200mA 250mA 0V 0V
Min.
0.6 6 18
Typ.
0.08 0.8 1500 8 21 Fundamental Mode
Max.
1 10 24
www.laser2000.co.uk
Parameter
Centre Wavelength Spectral Width (FWHM) Output Power Threshold Current Operational Current Polarisation nm nm W mA A -
Symbol
C Popt Ith IOp -
Min
762 40 40 -
Typ
763 50 50
@50mW
Max
764 10 70
Min
772 50 40 -
Typ
773 75 50
@75mW
Max
774 10 70
Min
779 70 40 -
4.55
2.2
(see image)
Typ
780 80 50
@80mW
Max
781 10 70
For more information on Laser 2000 products visit our website at:
Parameter
Centre Wavelength Spectral Width (FWHM) Output Power Threshold Current Operational Current Polarisation nm nm W mA A -
Symbol
C Popt Ith IOp -
Min
783 80 40 -
Typ
784 100 50
@100mW
Max
785 10 70 180 -
Min
859 100 60 -
Typ
860 150 70
@150mW
Max
861 10 90 250 -
Min
922 80 40 -
Typ
923 100 60
@100mW
Max
925 10 80 200 -
150 TM
230 TE
180 TE
Telephone: 01933 461 666 Fax: 01933 461 699 e-mail: sales@laser2000.co.uk website: www.laser2000.co.uk
Laser Diodes
10
Light Output (mW) 0C
10
100
-20
80
= C-13-DFB-E-A-NT
= C-15-DFB-E-A-NT
C-13-DFB-E-A-NT C-13-DFB-E-B-NT
10 (CW) 2 10 2 0 - +70 -40 - +100
C-15-DFB-E-A-NT C-15-DFB-E-B-NT
6 (CW) 2 10 2 0 - +70 -40 - +100
www.laser2000.co.uk
Optical and Electrical Characteristics(Tc=25C) (C-13-DFB-E-A-NT / B-NT & C-15-DFB-E-A-NT / B-NT) Parameter Symbol Min. Typ. Max
Slope Efficiency C-13-DFB-E-A-NT C-13-DFB-E-B-NT C-15-DFB-E-A-NT C-15-DFB-E-B-NT Threshold Current Optical Output Power Peak Wavelength
mW/mA mW/mA
Test condition
CW, Po=5mW CW, Po=5mW CW, Po=5mW CW, kink free
SE SE Ith Po Sr VF // tr / tf Im IDARK Ct
For more information on Laser 2000 products visit our website at:
mA mW nm nm dB V deg. ns A A pF
Ordering Codes
C
13 = 1310 15 = 1550
DFB = DFB
Side Mode Suppression Forward Voltage Beam Divergence Rise / Fall Time* PD Monitor Current PD Dark Current PD Capacitance
CW, Po=5mW(0 - 70C) CW, Po=5mW CW, Po=5mW,FWHM Ibias=Ith ,10-90 % CW,Po=5mW, VRPD=2V VRPD=5V VRPD=5V, f=1MHz
Laser Diode
C-13-DFB-E-A-NT C-13-DFB-E-B-NT C-15-DFB-E-A-NT C-15-DFB-E-B-NT
Wavelength (nm)
1310 1310 1550 1550
Optical and Electrical Characteristics(Tc=70C) (C-13-DFB-E-A-NT / B-NT & C-15-DFB-E-A-NT / B-NT) Parameter Symbol Min. Typ.
Threshold Current Peak power current mA mA Ith IPeak -
Max
50 100
Test condition
CW,Po=5mW CW,Po=8mW
Telephone: 01933 461 666 Fax: 01933 461 699 e-mail: sales@laser2000.co.uk website: www.laser2000.co.uk
Laser Diodes
DBR Lasers
Wavelength Adjustable Package Information Part No.
TO-3 Package With Sealed Cap Others TO-03 available (see image) on request
Recommended Operation Conditions Operational Temp. At Case (Tcase) Max Forward Min Typ Max Current (IF)
EYP-DBR-1083-00080-2000-TO-03-0000 All Others 15C 15C 40C 40C 180mA 230mA
Absolute Maximum Ratings Max. Operational Max . Forward Max . Heat Max. Reverse Temp. At Case (Tc) Current (IF) Current (Iheat) Voltage (VR)
50C 50C 200mA 250mA 300mA 300mA 0V 0V
Min.
-
Typ.
Max.
www.laser2000.co.uk
Parameter
Centre Wavelength Output Power Slope Efficiency Operational Current Divergence perpendicular (FWHM) Polarisation nm W W/A A -
Symbol
C Popt d IOp -
Min
1060 0.6 -
Typ
1061 100 0.8 @100mW 180 33 TE
Max
1062 120 0.9 250 -
Min
1062 0.6 -
Typ
1063 100 0.8 @100mW 180 33 TE
Max
1064 120 0.9 250 -
Min
1081 0.5 -
Typ
1083 75 @80mW 170 35 TE
Max
1084 100 0.8 200 -
10
For more information on Laser 2000 products visit our website at:
Telephone: 01933 461 666 Fax: 01933 461 699 e-mail: sales@laser2000.co.uk website: www.laser2000.co.uk
Laser Diodes
diode laser heat spreader bond wires mounting wire (-)
Package Dimensions
Emission 0.4
-0.15
CMT02
Emission plane C-Mount Thickness mm mm 7.2 -0.15 2
Package Pinout
2.8
CMT0n
2.3 4.6 6.4 1.3 2.1 Cathode (-) Anode (+) Mounting wire Housing
Recommended Operation Conditions Operational Temp. At Case (Tcase) Max Forward Min Typ Max Current (IF)
EYP-BAL-0920-01500-2010-CMT02-0000 EYP-BAL-0940-02000-2010-CMT02-0000 EYP-BAL-0980-02000-2010-CMT02-0000 EYP-BAL-1060-02000-2010-CMT02-0000 EYP-BAL-1120-01500-2010-CMT02-0000 All Others 15C 15C 15C 15C 15C 15C 40C 40C 40C 40C 40C 40C 2A 2.5A 2A 2.8A 3A 1.8A
Absolute Maximum Ratings Max. Operational Max . Forward Max. Reverse Temp. At Case (Tc) Current (IF) Voltage (VR)
50C 50C 50C 50C 50C 50C 2.2A 3.2A 3A 3.5A 3.5A 2A 0V 0V 0V 0V 0V 0V
Symbol
lc Ws
Typ.
2000 100*
www.laser2000.co.uk
EYP-BAL-0740-010002010-CMT02-0000
EYP-BAL-0760-015002010-CMT02-0000
EYP-BAL-0765-015002010-CMT02-0000
EYP-BAL-0790-015002010-CMT02-0000
EYP-BAL-0808-015002010-CMT02-0000
Parameter
Centre Wavelength Spectral Width (FWHM) Temp. Coeff. of Wavelength Output Power Slope Efficiency Threshold Current Operational Current Operational Voltage Divergence parallel (FWHM) Divergence perpendicular (FWHM) Polarisation nm nm nm/K W W/A mA A V -
Symbol
C TC Popt d Ith IOp UOp -
Min
805 0.9 350 5 22 -
Typ
808 2 0.3 1.5 1 420
@1.5W
Max
811 1.1 500 2 11 30 -
768 1.1 2 11 30 -
For more information on Laser 2000 products visit our website at:
1.5 2 8 27 TM
1.8 2 8 27 TM
1.8 2 8 27 TM
1.8 8 27 TM
1.8 2 8 27 TM
EYP-BAL-0920-015002010-CMT02-0000
EYP-BAL-0940-020002010-CMT02-0000
EYP-BAL-0980-020002010-CMT02-0000
EYP-BAL-1060-020002010-CMT02-0000
EYP-BAL-1120-015002010-CMT02-0000
Parameter
Centre Wavelength Spectral Width (FWHM) Temp. Coeff. of Wavelength Output Power Slope Efficiency Threshold Current Operational Current Operational Voltage Divergence parallel (FWHM) Divergence perpendicular (FWHM) Polarisation nm nm nm/K W W/A mA A V -
Symbol
C TC Popt d Ith IOp UOp -
Min
1115 0.7 -
Typ
1120 0.4 1.5 0.8 0.4
@1.5W
Max
1125 5 0.5 3 2 15 37 -
925 0.5 2 12 35 -
945 0.5 2 12 35 -
985 0.5 2 12 35 -
2 1.6 8 27 TE
3 1.6 8 27 TE
2.5 1.6 8 27 TE
2.8 1.6 8 33 TE
3.5 2 15 37 -
2.4 1.6 8 33 TE
11
Telephone: 01933 461 666 Fax: 01933 461 699 e-mail: sales@laser2000.co.uk website: www.laser2000.co.uk
Laser Diodes
7.00 6.00 5.00 Power (W) 4.00
0.00 0.00 0.00 1.00 2.00 3.00 4.00 5.00 6.00 7.00 8.00 Current (A)
LU0808B050
Up to 5W operation power Wavelength 800 - 812nm Wavelength 780 - 920nm on request Proven reliability for high power operation MTTF > 10,000h Mounting on Lumics DC60 or B-mount
2.9mm
2mm 0 - 10m R<10m 0.5 0.6 1.2 2.9 1.9 3.0 1.0 2.0 2.9 3.5 3.0 Front Facet Notes to B-mounting blocks: - Material: (OFHC) Cu, mounting surface with RA=0.2m - plated with Au over Ni 2.2 Solder tab copper Plating: Ni/(1-3)mAu plated
The Lumics LU0808B050 laser chip on submount contains an optimised InGaAsP / GaInP / AIGaAs quantum well high power laser on GaAs substrate. The extremely stringent reliability requirements are achieved through our patent pending innovative technology. This includes careful design, exactly defined manufacturing and extensive testing. The qualification contains life time tests and a set of thermal and mechanical tests. Each laser chip is individually serialised for traceability and is shipped with a specified set of test data.
front facet
www.laser2000.co.uk
Chip p-side down mounted onto Lumics DC60 submount or B-mount. Customised versions with other submount sizes, operation power levels and wavelengths are available on request.
Lumics B-Mount
1.2
6.0
Symbol
IF, max VR, max Tmax TS, max
Min
-20 -
Max
0.15 6.2 1.5 70 190
For more information on Laser 2000 products visit our website at:
Characteristics (at 800nm, 25C and Begin of Life (BOL)) Parameter Conditions Symbol Min
cw Operating Power Operating Forward Current Threshold Current Forward Voltage Slope Efficiency Peak Wavelength (1) Spectral Width (FWHM) Beam Divergence (Horizontal) Beam Divergence (Vertical) AR Reflectivity (2) HR Reflectivity Emitting Dimension (W x H) Spectral Shift With Temp.
(1)
Typ
Max
6.5 700 2.5 812 10 35 -
at 25C at Iop, Top at Iop, Top at Iop, Top at Iop, Top at Iop, Top at Iop, Top (2)
12
Telephone: 01933 461 666 Fax: 01933 461 699 e-mail: sales@laser2000.co.uk website: www.laser2000.co.uk
0 - 20m
2.2mm
Laser Diodes
8.00 7.00 6.00 Power (W) 5.00 4.00 3.00 2.00 1.00
4.00 Power Voltage 3.50 3.00 2.50 2.00 1.50 1.00 0.50 Voltage (V)
0.00 0.00 0.00 1.00 2.00 3.00 4.00 5.00 6.00 7.00 8.00 9.00 Current (A)
2mm 0 - 10m R<10m 0.5 0.6 1.2 2.9 1.0 2.0 1.9 3.0 2.9 3.5 3.0 Front Facet Notes to B-mounting blocks: - Material: (OFHC) Cu, mounting surface with RA=0.2m - plated with Au over Ni 2.2 Solder tab copper Plating: Ni/(1-3)mAu plated
2.9mm
www.laser2000.co.uk
The Lumics LU0975B050 laser chip on submount contains an optimised GaAs / AIGaAs / InGaAs quantum well high power laser. The extremely stringent reliability requirements are achieved through our patent pending innovative technology. This includes careful design, exactly defined manufacturing and extensive burn-in testing. The qualification contains life time tests and a set of thermal and mechanical tests. Each laser chip is individually serialised for traceability and is shipped with a specified set of test data. Applications are in fibre laser pumping, fibre amplifier, printing or medical treatment.
front facet
Chip p-side down mounted onto Lumics DC60 submount or B-mount. Customised versions with other submount sizes, operation power levels and wavelengths are available on request.
Symbol
IF, max VR, max Tmax TS, max
Min
-20 -
Max
6.2 1.5 70 190
6.0
For more information on Laser 2000 products visit our website at:
Characteristics (at 975nm, 25C and Begin of Life (BOL)) Parameter Conditions Symbol Min
cw Operating Power W Operating Forward Current A Threshold Current mA Forward Voltage V Slope Efficiency W/A nm Peak Wavelength (1) Spectral Width (FWHM) nm Beam Divergence (Horizontal) deg Beam Divergence (Vertical) deg % AR Reflectivity (2) HR Reflectivity % Emitting Dimension (W x H) m Spectral Shift With Temp. nm/K Operating Temperature C
(1)
Typ
Max
at 25C at Iop, Top at Iop, Top at Iop, Top at Iop, Top at Iop, Top at Iop, Top (2)
5 6.0 6.5 250 350 1.8 2.2 0.8 0.85 970 975 980 3 5 9 11 30 34 2 95 100 x 1 0.3 20 25 30
13
Telephone: 01933 461 666 Fax: 01933 461 699 e-mail: sales@laser2000.co.uk website: www.laser2000.co.uk
0.15
0 - 20m
2.2mm
Laser Diodes
Up to 90W @ 808nm!
ASMxxxxxx
a heat exchanger. A range of heat exchangers is available through Laser 2000 specifically for use with the silver bullet arrays. Alternatively silver bullets may be mounted on customer supplied heat exchangers. The required heat exchanger capacity is 2.5 times the power output and must have a thermal resistance of <0.25 C cm2/W.
Diode bar End block
The CEO range of laser diode bars is available packaged into an array submodule to form the fundamental building block for constructing high power diode arrays. Known as a Silver Bullet it is a packaged, high power laser diode with exceptional thermal properties designed for OEM integration. Each Silver Bullet consists of one, two or three mounted, CW or pulsed laser diodes on a BeO substrate. Heat Exchanger As laser diode arrays produce a large amount of heat, the silver bullet must be soldered onto
Bar Dimensions: 9.6 x 0.135 mm Package Thermal Resistance: 0.4C/W Soldering: Maximum soldering temperature is 100C. Indalloy 8 or Ostalloy 200 (44In42Sn14Cd) are recommended solders.
www.laser2000.co.uk
ASM01P050 ASM01P100 ASM02C040 ASM12C070 CW 40 28 7.5 1.8 40 46 x 2 80 x 1 200 792-812 <4 <4.0 <0.27 <42x<12 TE 3 <5.1 <0.036 6.3 35 25 3 -20 to 50 -40 to 85 CW 70 52 14 2.0 35 46 x 2 80 x 1 200 792-812 4 3.0 0.27 42x12 TM 3 <3.4 <0.020 4.4 35 25 3 -20 to 50 -40 to 85
For more information on Laser 2000 products visit our website at:
14
Telephone: 01933 461 666 Fax: 01933 461 699 e-mail: sales@laser2000.co.uk website: www.laser2000.co.uk
Laser Diodes
A Package
G Package
ARR18C020 G package
ARR29C020 W2 package
ARR20C040 E1 package
ARR26C040 Cs package
The following arrays are the standard Laser 2000 range of laser diode arrays. Each array is provided with the sub modules already mounted and soldered to the main block. Connection points are provided for current input and mounting holes are provided to attach the mounts to a heat exchanger.
ARR01C060 Derringer
www.laser2000.co.uk
Package Type:
Laser Diode Array Modules Temporal Mode CW Power Output (min) Peak Pulse Power
(1kHz 150s)
G
ARR18C020
E
CW 20 -
W2
CW 20 -
E1
CW 40 -
Cs
CW 40 -
A
Pulsed 300
G
Pulsed 400
Y
Pulsed 19000 55 13 59.4 40 72 x 54 90 x 1 133.3 808 3 4.0 0.25 40 x 10 TE 5 86.4 0.432
Z
Pulsed 2500 55 13 79.2 40 72 x 72 90 x 1 133.3 808 3 4.0 0.25 40 x 10 TE 5 115.2 0.576
Y
Pulsed 3000
Z
Pulsed 3900
ARR20C020 ARR29C020
ARR26C040 ARRCSC040
W W
CW 20 -
CW 60 -
CW 120 -
CW 240 -
For more information on Laser 2000 products visit our website at:
60 55 28 28 27 55 55 28 28 28 Operating Current A 13 13 7.5 7.5 7.5 9 9 7.5 7.5 7.5 Threshold Current A 6.5 8.8 1.1 1.1 1.0 1.05 0.95 3.3 6.6 15.2 Slope Efficiency W/A 40 40 42 42 40 40 38 42 42 42 Efficiency % 72 x 8 46 46 46 46 46 46 x 3 46 x 6 46 x 12 72 x 6 Number of Emitters 90 x 1 80 x 1 80 x 1 80 x 1 80 x 1 80 x 1 80 x 1 80 x 1 80 x 1 90 x 1 Emitter Size m 133 133 200 200 200 200 200 200 200 200 Emitter Pitch m 808 808 808 808 808 808 808 808 808 808 Centre Wavelength nm 3 3 3 3 3 3 3 3 3 3 Wavelength Tolerance nm 2.0 2.0 1.9 1.9 1.9 1.9 2.0 1.9 1.9 3.0 Spectral Width nm 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 Wavelength Shift nm/C 40 x 10 40 x 10 40 x 10 40 x 10 40 x 10 40 x 10 40 x 10 40 x 10 40 x 10 40 x 10 Beam Divergence FWHM x TE TE TE TE TE TM TM TE TE TE Polarisation 3 3 3 3 3 3 3 3 %/kHr CW Degradation Rate 5 5 Pulsed Degradation Rate %/Gshots 1.6 1.6 1.6 1.6 1.6 4.8 9.6 19.2 9.6 12.8 Built-in Voltage V 0.005 0.005 0.008 0.006 0.016 0.024 0.048 0.096 0.036 0.064 Series Resistance Absolute Maximum Ratings 35 35 35 60 60 35 35 35 12 16.0 Forward Current A 1.8 1.8 1.8 1.8 1.8 5.4 9.6 21.6 70 70 Operating Voltage V 25 25 25 25 25 25 25 25 25 25 Reverse Current A 3 3 3 3 3 3 3 3 3 3 Reverse Voltage V -20 to 50 -20 to 50 -20 to 50 -20 to 50 -20 to 50 -20 to 50 -20 to 50 -20 to 50 -20 to 50 -20 to 50 Operating Temperature C -40 to 85 -40 to 85 -40 to 85 -40 to 85 -40 to 85 -40 to 85 -40 to 85 -40 to 85 -40 to 85 -40 to 85 Storage Temperature C
55 55 13 13 92.4 123.2 40 40 72 x 84 72 x 112 90 x 1 90 x 1 133.3 133.3 808 808 3 3 4.0 4.0 0.25 0.25 40 x 10 40 x 10 TE TE 5 5 134.4 179.2 0.672 0.896
108 144 168 224 60 60 60 60 25 25 25 25 3 3 3 3 -20 to 50 -20 to 50 -20 to 50 -20 to 50 -40 to 85 -40 to 85 -40 to 85 -40 to 85
15
Telephone: 01933 461 666 Fax: 01933 461 699 e-mail: sales@laser2000.co.uk website: www.laser2000.co.uk
Laser Diodes
38.1
~1000
51.6
3.8
Dimensions in mm
www.laser2000.co.uk
Specification
Package style Output Interface Temporal Mode CW Power Output Operating Current Threshold Current Slope Efficiency Efficiency Number of Emitters Emitter Size Emitter Pitch Centre Wavelength Wavelength Tolerance Spectral Width Wavelength Shift Numerical Aperture Output Bundle Diameter Beam Divergence FWHM Polarisation CW Degradation Rate Built-in Voltage Series Resistance Operating Voltage Absolute Max Ratings Forward Current Reverse Current Reverse Voltage Operating Temperature Storage Temperature
FCA02C015
Fibre Package Fibre Bundle CW 15 28 7.5 1.1 42 808 3 1.9 0.25 0.22 1.2 3 1.6 0.011 1.9 35 25 3 -20 to 50 -40 to 85
FCA03C060
Fibre Package Fibre Bundle CW 60 28 7.5 5.5 42 808 3 2 0.25 0.12 2.3 --3 8 0.025 9 35 25 3 -20 to 50 -40 to 85
LAR29C017
W2 Lensed CW 17 28 7.5 1.1 42 46 80 x 1 200 808 3 1.9 0.25 1x10 TE 3 1.6 0.005 1.8 35 25 3 -20 to 50 -40 to 85
LAR23C045
E2 Lensed CW 45 28 7.5 3.3 42 46 x 3 80 x 1 200 808 3 3.1 0.25 --3 x 10 TE 3 4.8 0.015 5.4 35 25 3 -20 to 50 -40 to 85
LAR03C350
Y Lensed CW 350 28 7.5 27.5 40 46 x 25 80 x 1 200 808 3 4.0 0.25 3 x 10 TE 3 40 0.125 45 35 25 3 -20 to 50 -40 to 85
16
For more information on Laser 2000 products visit our website at:
Telephone: 01933 461 666 Fax: 01933 461 699 e-mail: sales@laser2000.co.uk website: www.laser2000.co.uk
Laser Diodes
Pump Engines
RB, RD CW Multimode Power Output
MicroRod RB-23 MicroRod RB-33 MiniRod RD-46 MiniRod RD-66 2mm 3mm 4mm 6mm Rod Rod Rod Rod
150
CW Output Power (W) RB-23: MicroRod Laser Module
100 50 0 10
15
20
25
Drive Current (A) Multimode output from the standard 170mm flat HR/flat 90% OC cavity configuration.
RB Series
Pump diode arrays
Laser beam
Cavity Length Rod Curvature 6.35mm Diameter, 0.6% Dopant, 1MCC Faces
RG
Pump diode arrays (each made up of three individual diode bars) radially pump the Nd:YAG crystal rod from 3 sides.
RE
10
12
14
16
18
20
22
24
26
28
30
www.laser2000.co.uk
Housing
For more information on Laser 2000 products visit our website at:
Like the RB, the RD, RE and RG are powered by a radial arrangement of diode arrays. This design traps the bulk of the diode light in the flow tube, providing optimum 808nm absorption in to the YAG volume .Standard units have 1% Nd doped YAG crystals providing an output beam of 1064nm. The YAG is AR coated on the end faces and the flow tube reflective coated to maintain uniform pumping of the YAG material.
RB Series
24 44 59 66 66
RD, RE, RG
Product Code
RB-23 RB-33 RD-46 RD-56 RD-66 RE50-1C2 RE63-1C2 RE70-1C2 RE63-2C2 RE70-2C2 RG-63 RG-70 RG-80
a
RD RE RG 140 165 265
Dimension (mm) b
62 75 90
c
55 65 65
17
Telephone: 01933 461 666 Fax: 01933 461 699 e-mail: sales@laser2000.co.uk website: www.laser2000.co.uk
Laser Diodes
100
PL63 / 65 / 67 Series
10
-10 0 10 20 30 40 50 Case Temperature, Tc (C)
Visible and Near Infrared Fabry - Perot Laser Diodes, Fibre Pigtailed
PL Series
Applications:
Optical sensing Test and measurement equipment Medical apparatus Imaging and scanning systems
Laser 2000 offers a variety of packaging options for its visible series of laser diodes. These units are available in ready-to-use, fibre-coupled packages, including FC, ST, and SC receptacles, as well as fibre-pigtailed units. The laser diodes offered by Laser 2000 are of proven design and manufacture. The standard wavelengths are centred at 630nm, 650nm and 670nm. Fibre-coupled CW (continuous-wave) output powers range from 0.1 - 10 mW, depending on the fibre type and desired performance level. Devices may be optimised for coupling to sensor or telecommunication size optical fibre, from 3m to 200m core. Optional board - or panel - mount flanges are available for pigtailed devices. Also, Laser 2000 will arrange to package non-standard lasers or parts specified by a customer using standard or custom receptacle or pigtailing techniques. Both receptacle and pigtail packages are made using an active micro-positioning system and proven packaging techniques. Reliable and efficient devices are produced. In many cases several different pin-out options are available for similar wavelength lasers.
www.laser2000.co.uk
For more information on Laser 2000 products visit our website at:
Pin-out
TO Dia (mm)
Continuous Wavelength Lasers @ VISIBLE PL63C0016OOA-0-0-01 625 PL63H0.8FC11-T-0 625 PL65T0.4UN11-T-0 640 PL65T0012FCA-0-0-01 640 PL66M0026FCA-0-0-01 645 PL67T0016STA-0-0-01 660 PL66M005FC11-T-0 645 NEAR IR PL78B0037OOA-0-0-01 770 PL78H0102FCA -0-0-01 775 PL78M001FC11-T-0 770 PL78R0012STA -0-0-01 770 PL78D0.5SC7A -0-0-01 770 PL83H0037OOA-0-0-01 820 PL98A0038FAA-0-0-01 965
1
Examples only; most device/packaging combinations available. Changes to specifications may be made without notice.
18
Telephone: 01933 461 666 Fax: 01933 461 699 e-mail: sales@laser2000.co.uk website: www.laser2000.co.uk
Laser Diodes
All Package Styles and Dimensions are Detailed on Page 21
C-13 / C-15 Series Parameter
Fibre Output Power Receptacle / Pigtailed LD Reverse Voltage PD Reverse Voltage PD Forward Current Operating Temperature Storage Temperature
mW V V mA C C
Fabry - Perot
Optical and Electrical Characteristics(Tc=25C)
Parameter Symbol
mA Ith
Min.
Typ.
12
Max
20
Test condition
CW
Laser diode with MQW structure Uncooled operation at -40 to +85C Built-in InGaAs monitor photodiode Hermetically sealed active component
0.3 Pf 0.5 1 p
nm
1290
1310
1330
CW, Pf=Pf(min.)
C-13-001-P-SFCL/M/H C-15-001-R-SFCL/M/H C-15-001-P-SFCL/M/H Spectral Width Forward Voltage Rise / Fall Time* Tracking Error PD Monitor Current PD Dark Current PD Capacitance nm V ns dB A A pF VF tr / tf Pf/Pf Im IDARK Ct 100 6 2 1.2 5 1.6 0.5 1.0 0.1 15 CW, Pf=Pf(min.) CW, Pf=Pf(min.) Ibias=Ith ,10~90 % APC,-40 - +85C CW, Pf=Pf(min.), VRPD=2V VRPD=5V VRPD=5V, f=1MHz 1520 1550 1580
These devices utilise the laser diodes detailed on pages 3 & 9 to deliver unequalled high temperature performance and high modulation bandwidth in either a singlemode fibre pigtailed package or in singlemode receptacle connector package. Whilst designed for fibre optic networks, these devices are highly suitable for use in optical sensing, test and measurement equipment, medical apparatus and imaging systems. Whereas the DFB lasers are suitable for 2.5Gb/sec operation. These lasers are provided in either a singlemode pigtailed coaxial package or a singlemode connector receptacle package. Both of these package types can be provided with a wide range of industry standard singlemode connectors, some of which are detailed here. Each laser is available in one of three different power output options. Other power outputs are available on request. The pin assignment of the laser diode chip and photodiode chip may be customised to suit case-positive or case-ground applications.
All optical data refer to a coupled 9/125m SM fibre. * 0.1 nsec option available
DFB
Optical and Electrical Characteristics(Tc=25C)
Parameter
Threshold Current Fibre Output Power L M H Peak Wavelength C-13-DFB2.5-R-SFC C-13-DFB2.5-P-SFC C-15-DFB2.5-R-SFC C-15-DFB2.5-P-SFC Sidemode Suppression Forward Voltage Rise / Fall Time* Tracking Error PD Monitor Current PD Dark Current PD Capacitance dB V ns dB A A pF Sr VF tr / tf Pf / Pf Im IDARK Ct 30 100 35 1.2 6 1.5 0.5* 1.0 0.1 15 CW, Pf=Pf(min.), 0-70C CW, Pf=Pf(min.) Ibias=Ith ,10~90 % APC,0 - 70C CW, Pf=Pf(min.), VRPD=2V VRPD=5V VRPD=5V, f=1MHz 1535 1550 1565 nm 1295 1310 1325 Pf 0.2 0.5 1 0.5 1 2 CW,Ith+25mA, kink free mA
Symbol
Ith
Min.
-
Typ.
10
Max
15
Test condition
CW
www.laser2000.co.uk
Ordering Codes
C
13 = 1310 15 = 1550
R = Receptacle P = Pigtailed
S
FC = FC/PC Connector SC = SC/PC Connector
All optical data refer to a coupled 9/125m SM fibre * 0.15nsec option available, suitable for use @ 2.5Gb/sec
For more information on Laser 2000 products visit our website at:
Laser Diode
Fabry - Perot
C-13-001-P-SFCL C-13-001-R-SFCL C-13-001-P-SFCM C-13-001-R-SFCM C-13-001-P-SFCH C-13-001-R-SFCH C-15-001-P-SFCL C-15-001-R-SFCL C-15-001-P-SFCM C-15-001-R-SFCM C-15-001-P-SFCH C-15-001-R-SFCH
Wavelength (nm)
1310 1310 1310 1310 1310 1310 1550 1550 1550 1550 1550 1550
Connector
Laser Diode
DFB
Wavelength (nm)
1310 1310 1310 1310 1310 1310 1550 1550 1550 1550 1550 1550
Connector
Pigtailed FC/PC Receptacle FC/PC Pigtailed FC/PC Receptacle FC/PC Pigtailed FC/PC Receptacle FC/PC Pigtailed FC/PC Receptacle FC/PC Pigtailed FC/PC Receptacle FC/PC Pigtailed FC/PC Receptacle FC/PC
C-13-DFB2.5-P-SFCL C-13-DFB2.5-R-SFCL C-13-DFB2.5-P-SFCM C-13-DFB2.5-R-SFCM C-13-DFB2.5-P-SFCH C-13-DFB2.5-R-SFCH C-15-DFB2.5-P-SFCL C-15-DFB2.5-R-SFCL C-15-DFB2.5-P-SFCM C-15-DFB2.5-R-SFCM C-15-DFB2.5-P-SFCH C-15-DFB2.5-R-SFCH
Pigtailed FC/PC Receptacle FC/PC Pigtailed FC/PC Receptacle FC/PC Pigtailed FC/PC Receptacle FC/PC Pigtailed FC/PC Receptacle FC/PC Pigtailed FC/PC Receptacle FC/PC Pigtailed FC/PC Receptacle FC/PC
19
Telephone: 01933 461 666 Fax: 01933 461 699 e-mail: sales@laser2000.co.uk website: www.laser2000.co.uk
Laser Diodes
C-DFB Series
PL16 Series
Features:
Tracking Error 0.5dB Compact, reliable receptacle & coax fibre-coupled package 0.1 to 1.5mW singlemode (9 / 125)
Applications:
Fibre optic communications systems Fibre optic test instrumentation Part Number ID**
C-1270A-DFB-P/R-SFC C-1290A-DFB-P/R-SFC C-1310A-DFB-P/R-SFC C-1330A-DFB-P/R-SFC C-1350A-DFB-P/R-SFC C-1370A-DFB-P/R-SFC C-1390A-DFB-P/R-SFC C-1410A-DFB-P/R-SFC C-1430A-DFB-P/R-SFC C-1450A-DFB-P/R-SFC C-1470A-DFB-P/R-SFC C-1490A-DFB-P/R-SFC C-1510A-DFB-P/R-SFC C-1530A-DFB-P/R-SFC C-1550A-DFB-P/R-SFC C-1570A-DFB-P/R-SFC C-1590A-DFB-P/R-SFC C-1610A-DFB-P/R-SFC
** Choose power & connector option, P = Pigtailed FC/PC; R = Receptacle FC/PC
Laser 2000 offers a variety of packaging options for its 1615 nm laser diodes. These units are available in ready-touse, fibre-coupled packages, including FC, ST, SC and other receptacles, as well as fibre- pigtailed units. The InGaAsP laser diodes offered by Laser 2000 are of proven design and manufacture; the standard wavelength is 1615 nm. Fibre-coupled CW (continuous wavelength) output powers range from 0.1 - 2mW, depending on the fibre type (singlemode or multimode) used. Tracking error over OTR -40 to +85C is 1.0 dB maximum; typical 0.5dB. Optional board - or panel - mount flanges are available for pigtailed devices. Also, Laser 2000 will arrange to package non-standard lasers or parts specified by a customer using standard or custom receptacle or pigtailing techniques. Lasers in 5.6 or 9.0 mm TO cans can be packaged. Both receptacle and pigtail packages are made using an active micro-positioning system and proven packaging techniques. Reliable and efficient devices are produced.
www.laser2000.co.uk
Min.
0.2 0.5 1 2 xxxx-2 30 100 -
Typ.
10 xxxx* 0.1 35 1.2 6
Max
15 0.5 1 2 3 xxxx+2 0.2 1.5 0.5 1.0 0.1 15
Test condition
CW
For more information on Laser 2000 products visit our website at:
CW, Pf=Pf(min.), 0-70C CW, Pf=Pf(min.) Ibias=Ith ,10~90 % APC,0 - 70C CW, Pf=Pf(min.), VRPD=2V VRPD=5V VRPD=5V, f=1MHz
Part No.1
Continuous Wavelength InGaAsP 1615 nm Lasers @ 25C PL16M001100A-0-0-01 5 10 1600 1615 PL16M001FC11-S-0 5 10 1600 1615 PL16M002200A-0-0-01 5 10 1600 1615 PL16M001SC21-S-01 5 10 1600 1615 PL16M0.51FAA-0-0-01 5 10 1600 1615 PL16M0.5FC21-S-0 5 10 1600 1615 PL16M0.5FC11-S-0 5 10 1600 1615
1 Examples only; most device/packaging combinations available. Changes to specifications may be made without notice. 01-10PL16MRev.1
20
Telephone: 01933 461 666 Fax: 01933 461 699 e-mail: sales@laser2000.co.uk website: www.laser2000.co.uk
Laser Diodes
Package Dimensions
Laser Diode Package Dimensions 1310nm & 1550nm Laser Diodes and 1470nm - 1610nm Laser Diodes
- see Pages 18, 19 & 20
FC receptacle package with 2-hole flange
2-2.3
7.5
22
3.5
2-2.3
PC (SR=20)
FC Receptacle
19 13.4 2 1 3 4
7.6
9.2
Visible and Near IR FP Laser Diodes and 1310nm & 1550nm Laser Diodes
- see Pages 2, 3 & 9
9mm TO Package
LDxxx Series
5.6mm TO Package
LDxxx Series C-13-001-E-B / C-15-001-E-B C-13-DFB-E-B-NT / C-15-DFB-E-B-NT (Some dimensions subject to confirmation) 5.6- 0.025
1.00.1
+0
www.laser2000.co.uk
+0
0.4 -0
+0.1
0.4 -0
+0.1
90
0.40.1
90
0.4
(90) (0.4)
10.1
Top View
2.30.2 4.10.3 3.550.1
Emitting Point Glass
For more information on Laser 2000 products visit our website at:
0.3
6.20.2 ( 2.0)
Focal Plane
6.20.5
3.50.2
4.1
2.45 6.51.0
4.77
Emitting Point
Basic Plane
1.20.07
3 - 0.450.1
91 1.50.1 1 2 3
1.27 3 - 0.450.1
141 4 - 0.450.04
1.20.1 1 2 3
1 2
4 2.540.35 2 2.00.2 1
Bottom View
Bottom View
Dimensions in mm
Bottom View
21
Telephone: 01933 461 666 Fax: 01933 461 699 e-mail: sales@laser2000.co.uk website: www.laser2000.co.uk
2.0
3 2
Laser Diodes
12.7
15.24
Key
20.8
20
(1000) 4.6
Polarisation State
AB5A636P1 / AB6A636P1
Wavelength selection AB5A636P1: 1530-1565nm AB6A636P1: 1565-1620nm Single longitudinal mode Accurate peak wavelength (0.5nm) Built-in optical isolator (30dB) Built-in monitor photo diode FC/SPC connector PMF pigtail type
AB5A636P1 and AB6A636P1 are nGaAsP/InP distributed feedback (DFB) laser diodes developed as a light source for wavelength division multiplexing (WDM) optical communication.They are intended for use with an external modulator.
7.8
0.5
FC-SPC Connector
(Dimensions in mm)
7
PD TEC LD
1
Thermistor
8
Absolute Maximum Ratings (TLD = 25C) Item Symbol Rating
300 2 10 20 -20~+70 -40~+85 2.0
14
Description
PIN PIN PIN PIN PIN PIN PIN 8 9 10 11 12 13 14 Case Case NC LD anode NC LD anode NC
Unit
mA V mA V C C A PIN PIN PIN PIN PIN PIN PIN 1 2 3 4 5 6 7
Description
Thermistor Thermistor LD cathode PD anode PD cathode Cooler anode Cooler cathode
www.laser2000.co.uk
LD Forward Current LD Reverse Voltage PD Forward Current PD Reverse Voltage Operating Case Temperature Storage Temperature Cooler Current
For more information on Laser 2000 products visit our website at:
Test condition
Pf = 40mW IF = 250mA Pf = 40mW Pf = 40mW
Min.
40 20 1530 1565 -0.5 33 -0.5 50 9.5
Typ.
20 40 3 10
Max.
2.5 35 1565 1620 +0.5 15 0.5 2000 0.1 2.0 1.5 10.5
Unit
V mA mW dB nm nm nm dB MHz dB A A V A K
- AB5A636P1: - AB6A636P1:
Pf = 40mW Pf = 40mW Pf = 40mW Pf = 40mW, Im = const, TC = -20~70C Pf = 40mW, VRD = 5V VRD = 5V Pf = 40mW, TC = 70C Pf = 40mW, TC = 70C TLD = 25C, B = 3900 100K
*1 Peak Wavelength: 1530.3 - 1619.6nm 50GHz steps. All wavelengths are referenced to a vacuum. For wavelength outside this range, please contact Laser 2000. (Note) Polarization state of DFB-LD is aligned parallel to the slow axis. This product complies with Class 3A laser products. Specifications are subject to change without notice.
22
Telephone: 01933 461 666 Fax: 01933 461 699 e-mail: sales@laser2000.co.uk website: www.laser2000.co.uk
Laser Diodes
30mW in S M or PM F ibre! Tunable
A 1915 LMI
5.6
1.6
0.05
Up to 30 mW output power 50 GHz spaced wavelength selection according to ITU-T G.692 Optimised for use with LiNbO3 external modulator Polarisation maintaining fibre pigtail
This laser module contains an Alcatel SLMQW DFB laser and is designed for use with external modulation optimised for high power Wavelength Division Multiplexed (WDM) systems. The module incorporates a polarisation maintaining fibre pigtail thermoelectric cooler, precision thermistor, and optical isolator for stable operation under all conditions.
12.7 7mlnl 8
Dimensions in mm
Description
PIN 1: PIN 2: PIN 3: PIN 4: PIN 5: PIN 6: PIN 7: PIN 8: PIN 9: PIN 10: PIN 11: PIN 12: PIN 13: PIN 14: Thermistor Thermistor Laser DC bias (-) Photodiode Anode (-) Photodiode Cathode (+) TEC (+) TEC (-) Case Ground Case Ground Not Connected RF Common (+) Laser RF Input (+) RF Common (+) Not Connected
4
200nH
2
TS
TEC
Product Code
A1905LMI10 A1905LMI20 A1905LMI30
Output Power
10mW 20mW 30mW 8
PD LD
10k 20
9 10 11 12 13 14
www.laser2000.co.uk
Optical characteristics
1905 LMI Parameter
Threshold Current Output Power mA mW
Condition
Twave = 20 to 35C
Symb
Ith Pf
Min
10 20 30
Typical
Max
40
V mA
For more information on Laser 2000 products visit our website at:
Pf, pin 3 & 11 10mW, pin 3 & 11 20mW, pin 3 & 11 25mW, pin 3 & 11 30mW, pin 3 & 11 [2] [2] CW, Pf, FWHM Pf
Vf lf
Emission Wavelength (Emitted-Target) Wavelength Laser chip temperature range for tunability Spectral Width Side-mode suppression ratio Dispersion Penalty Tracking Error Adiabatic Chirp Relative Intensity Noise Photodiode Dark Current Wavelength Drift vsTcase Thermistor Resistance Thermistor Temperature Coefficient TEC Current TEC Voltage TE/TM extinction ratio of pigtail
C MHz dB dB %
MHz / mA
m e T SMSR
dB / Hz nA pm / C k %/K A V dB
[1] [1]
23
Telephone: 01933 461 666 Fax: 01933 461 699 e-mail: sales@laser2000.co.uk website: www.laser2000.co.uk
Laser Diodes
Safety Information
0.90
6.30
Wavelength = 1.3 m Maximum Power = 75mW Singlemode Fibre Pigtail Fibre Numerical Aperture = 0.14 Labeling is not affixed to the laser module due to size constraints; rather, labeling is placed on the outside of the shipping box.
300.5 20.0
5.60 10.5
4
4-0.450.04
This product is not shipped with a power supply. Caution: use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. * IEC is a registered trademark of the International Electrotechnical Commission ** ANSI is a registered trademark of the American National Standards Institute
3 2
2.000.20 P.C.D.
Pin Assignment
1. 2. 3. 4. Type A PD Cathode PD Anode LD Anode, GRD LD cathode Type C PD Anode LD Anode,PD Cathode GRD LD cathode
0 -10 -20
Intensity vs Wavelength
Power (mW)
Power (mW)
0 10 20 30 40 50 60 70
Voltage (V)
25C
-30 -40 -50 -60 -70 -80 1305 1310 1315 1320 1325
85C
20
30
40
50
60
0.0
Current (mA)
Current (mA)
Current (mA)
Parameter
Symbol
C C mA V V Tc Tstg Vr Vrpd
Condition
I=Iop -
Min
-20 -40 -
Max
85 100 120 2 10
www.laser2000.co.uk
Operating Case Temperature Storage Temperature Laser Forward Current Laser Reverse Bias Photodiode Reverse Bias
RF Characteristics Parameter
Relaxation Oscillation Frequency Modulation Bandwidth Intermodulation Distortion 2 GHz GHz dBc
Symbol
fR BW IMD2
Test Conditions
Min
1.0 -
Typ
4.5 -45
Max
-
Intermodulation Distortion 3
dBc
For more information on Laser 2000 products visit our website at:
RF Bandpass Flatness
dB
Po = 0.5mW -3dB, Po = 0.5mW T = 25C, Po = 0.5mW, OMI = 0.1, Two-tone test, 13MHz and 19MHz, 7dB plus connector loss IMD3 T = 25C, Po = 0.5mW, OMI = 0.1, Two-tone test, 13MHz and 19MHz, 7dB plus connector loss, all peaks from 5MHz to 300MHz meet this level BF Peak to valley, 5MHz to 300MHz
-45
1.0
FP-1310-C5-0.5-A-xx-A-x-x
FP-1310-C5-1.8-A-xx-A-x-x
Min
-20 0.5 1275 75 -1 30
Typ
10 25 20 40 1.1 1310 1.6 0.45 35
Max
85 14 35 27 60 1.6 1345 2.5 0.5 400 200 1 -
Test Conditions
CW T = 25C T = 85C CW, Po=0.5mW, T=25 C CW, Po=0.5mW, T=85 C Po=0.5 mW Po=0.5 mW, CW Po=0.5 mW VR=5 V VR=5 V Imon=const, =10 log (Pf/0.5) [dB] 30
Min
-20 1.8 1275 75 -1 35
Typ
2.0 10 25 25 35 1.1 1310 1.6 0.45 -
Max
85 14 35 35 60 1.6 1345 2.5 0.5 400 200 1
Test Conditions
CW T = 25C T = 85C CW, Po=1.8mW, T=25 C CW, Po=1.8mW, T=85 C Po=1.8 mW Po=1.8 mW, CW Po=1.8 mW VR=5 V VR=5 V Imon=const, =10 log (Pf/1.8) [dB]
nm nm nm/C A nA dB dB
* Optical Isolation is only applicable to devices that include the optical isolator option.
24
Telephone: 01933 461 666 Fax: 01933 461 699 e-mail: sales@laser2000.co.uk website: www.laser2000.co.uk
Laser Diodes
Safety Information
Wavelength =1.3 m Maximum Power = 75mW Single-mode fiber pigtail Fiber Numerical Aperture = 0.14 Labeling is not affixed to the laser module due to size constraints; rather, labeling is placed on the outside of the shipping box. This product is not shipped with a power supply. Caution: use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. * IEC is a registered trademark of the International Electrotechnical Commission. ** ANSI is a registered trademark of the American National Standards Institute.
Symbol
Tc Tstg If Vr Vrpd
Condition
I=Iop -
Min
-20 -40 -
Max
85 100 120 2 10
Min
-20 2.0 1290 30 25 -1 30
Typ
12 35 60 1.1 1310 0.1 0.09 40 -
Max
85* 18 50 80 1.6 1330 1.0 375 200 1 -
Test Conditions
CW T=25 C T=85 C T=85 C Po=2.0 mW Po=2.0 mW, CW Po=2.0 mW Po=2.0 mW Vrpd=5 V Vrpd=5 V Imon=const, =10 log (Po/2.0) [dB]
www.laser2000.co.uk
The devices feature high output power, wide operating temperature range, low distortion characteristics, low RIN noise, and high side mode suppression. Their uncooled, hermetically sealed, coaxial fiber-pigtailed packages are a cost-effective means of providing a highly linear light source for intermediate-reach and long-reach analog transmission applications.
For more information on Laser 2000 products visit our website at:
0.90
Parameters are at 25 C unless otherwise noted. * See Ordering Options for operating temperature ranges available.
300.5
RF Characteristics Parameter
Relative Intensity Noise Second-Order Intermodulation dB/Hz dBc
Symbol
RIN IMD2
Min
-
Typ
-
Max
-145 -40
Test Conditions
CW,Po=2.0 mW, f=80 MHz to 2200 MHz T=25 C, Po=2.0 mW, OMI=0.2, Two-tone test, 936 MHz and 958 MHz T=25 C, Po=2.0 mW, OMI=0.2, Two-tone test, 936 MHz and 958 MHz, and also 1800 MHz and 1801 MHz Peak to valley, 5 MHz to 300 MHz
4-0.450.04
3 2
Pin Assignment
1. 2. 3. 4. Type A PD Cathode PD Anode LD Anode, GRD LD cathode Type C PD Anode LD Anode,PD Cathode GRD LD cathode
RF Bandpass Flatness
dB
BF
4.0
25
Telephone: 01933 461 666 Fax: 01933 461 699 e-mail: sales@laser2000.co.uk website: www.laser2000.co.uk
Laser Diodes
4 3 2 -20 C 1 0 0 10 20 30 40 50 Current (mA) 25 C
Power (mW)
60
70 80
Advanced Multiple Quantum Well (MQW) Distributed Feedback (DFB) Laser Design Low Distortion - CSO -53 dBc - CTB -62 dBc RIN < -145 dB/Hz Cost-effective Uncooled Laser Technology SMSR typ. 40 dB 5.6-mm TO-style package with SMF pigtail Applications CATV Forward-path Analog transmission
The DFB-1310-C5-4-A3-xx-x-x series of MultiQuantum Well (MQW) Distributed Feedback (DFB) lasers have been designed specifically analog applications, especially CATV forward-path.
0 10
20 30 40 50 60 70 80 90 Current (mA)
Output Spectrum
10 0 -10 -20 -30 -40 -50 -60 -70 1306 1307 1308 1309 1310 1311 1312 Wavelength (nm) Connector SC=SC/PC FC=FC/PC SA=SC/APC FA=FC/APC NC=No Connector Temperature A=-20C to 85C B=-20C to 75 Pin Assignment A= Pin Type A C= Pin Type C Tc=25C CW
Symbol
Tc Tstg If Vr Vrpd
Condition
I=Iop -
Min
-20 -40 -
Max
85 100 120 2 10
www.laser2000.co.uk
The devices feature high output power, wide operating temperature range, low distortion characteristics, low RIN noise, and high side mode suppression. Their uncooled, hermetically sealed, coaxial fibre- pigtailed packages are a cost-effective means of providing a highly linear light source for intermediate- reach and long-reach analog transmission applications.
Min
-20* 4.0 1280 30 75 -1 30
Typ
12 35 70 1.1 1310 0.1 0.09 40 35
Max
85* 18 50 100 1.6 1340 1.0 400 200 1 -
Test Conditions
CW T=25 C T=85 C T=85 C Po=4.0 mW Po=4.0 mW, CW Po=4.0 mW Po=4.0 mW VR=5 V VR=5 V Imon=const, =10 log (Pf/4.0) [dB]
For more information on Laser 2000 products visit our website at:
0.90
300.5
Parameters are at 25 C unless otherwise noted. * See Ordering Options for operating temperature ranges available.
4-0.450.04
3 2
2.000.20 P.C.D.
RF Characteristics Parameter
Relative Intensity Noise Relaxation Oscillation Frequency Modulation Bandwidth Composite Second-Order Composite Triple Beat Carrier-to-Noise ratio RF Bandpass Flatness dB/Hz GHz GHz dBc dBc dB dB
Symbol
RIN fR BW IMD2 CTB CNR BF
Min
1.0 50 -
Typ
4.5 -
Max
-145 -53 -62 1.0
Test Conditions
CW,Po=4.0 mW, f=50 MHz to 550 MHz Po=4.0mW -3dB, Po=4.0mW Note 1 Note 1 Note 1 Peak to valley, 50 MHz to 550 MHz
Pin Assignment
1. 2. 3. 4. Type A PD Cathode PD Anode LD Anode, GRD LD cathode Type C PD Anode LD Anode,PD Cathode GRD LD cathode
Note 1: Test condition: Po=4mW, OMI 3.2%, 77 unmodulated carriers (50 to 550 MHz), Received Power=-4dBm.
26
Telephone: 01933 461 666 Fax: 01933 461 699 e-mail: sales@laser2000.co.uk website: www.laser2000.co.uk
Laser Diodes
Safety Information
Wavelength =1.55 m Maximum Power = 75mW Single-mode fibre pigtail Fibre Numerical Aperture = 0.14 Labeling is not affixed to the laser module due to size constraints; rather, labeling is placed on the outside of the shipping box. This product is not shipped with a power supply. Caution: use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. * IEC is a registered trademark of the International Electrotechnical Commission. ** ANSI is a registered trademark of the American National Standards Institute.
Symbol
Tc Tstg If Vr Vrpd
Condition
I=Iop -
Min
-20 -40 -
Max
85 100 120 2 10
www.laser2000.co.uk
The devices feature high output power, wide operating temperature range, low distortion characteristics, low RIN noise, and high side mode suppression. Their uncooled, hermetically sealed, coaxial fibre-pigtailed packages are a cost-effective means of providing a highly linear light source for intermediate-reach and long-reach analog transmission applications.
Min
-20 2.0 1530 30 25 -1 30
Typ
14 40 60 1.1 1550 0.1 0.11 40 -
Max
85* 20 55 80 1.6 1570 1.0 375 200 1 -
Test Conditions
CW T=25 C T=85 C T=85 C Po=2.0 mW Po=2.0 mW, CW Po=2.0 mW Po=2.0 mW Vrpd=5 V Vrpd=5 V Imon=const, =10 log (Po/2.0) [dB]
For more information on Laser 2000 products visit our website at:
0.90
300.5
Parameters are at 25 C unless otherwise noted. * See Ordering Options for operating temperature ranges available.
4-0.450.04
3 2
2.000.20 P.C.D.
RF Characteristics Parameter
Relative Intensity Noise Third-Order Intermodulation dB/Hz dBc
Symbol
RIN IMD3
Min
-
Typ
-
Max
-145 -60
Test Conditions
CW,Po=2.0 mW, f=300 MHz to 1000 MHz T=25 C, Po=2.0 mW, OMI=0.2, Two-tone test, 936 MHz and 958 MHz Peak to valley, 50 MHz to 1000 MHz
Pin Assignment
1. 2. 3. 4. Type A PD Cathode PD Anode LD Anode, GRD LD cathode Type C PD Anode LD Anode,PD Cathode GRD LD cathode
RF Bandpass Flatness
dB
BF
1.0
27
Telephone: 01933 461 666 Fax: 01933 461 699 e-mail: sales@laser2000.co.uk website: www.laser2000.co.uk
Laser Diodes
Safety Information
Wavelength =1.55 m Maximum Power = 75mW Single-mode fibre pigtail Fibre Numerical Aperture = 0.14 Labeling is not affixed to the laser module due to size constraints; rather, labeling is placed on the outside of the shipping box. This product is not shipped with a power supply. Caution: use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. * IEC is a registered trademark of the International Electrotechnical Commission. ** ANSI is a registered trademark of the American National Standards Institute.
Symbol
Tc Tstg If Vr Vrpd
Condition
I=Iop -
Min
-20 -40 -
Max
85 100 120 2 10
Min
-20 2.0 1530 30 25 -1 30
Typ
14 40 60 1.1 1550 0.1 0.11 40 -
Max
85* 20 55 80 1.6 1570 1.0 375 200 1 -
Test Conditions
CW T=25 C T=85 C T=85 C Po=2.0 mW Po=2.0 mW, CW Po=2.0 mW Po=2.0 mW Vrpd=5 V Vrpd=5 V Imon=const, =10 log (Po/2.0) [dB]
www.laser2000.co.uk
The devices feature high output power, wide operating temperature range, low distortion characteristics, low RIN noise, and high side mode suppression. Their uncooled, hermetically sealed, coaxial fibre-pigtailed packages are a cost-effective means of providing a highly linear light source for intermediate-reach and long-reach analog transmission applications.
For more information on Laser 2000 products visit our website at:
0.90
Parameters are at 25 C unless otherwise noted. * See Ordering Options for operating temperature ranges available.
300.5
RF Characteristics Parameter
Relative Intensity Noise Second-Order Intermodulation dB/Hz dBc
Symbol
RIN IMD2
Min
-
Typ
-
Max
-145 -40
Test Conditions
CW,Po=2.0 mW, f=80 MHz to 2200 MHz T=25 C, Po=2.0 mW, OMI=0.2, Two-tone test, 936 MHz and 958 MHz T=25 C, Po=2.0 mW, OMI=0.2, Two-tone test, 936 MHz and 958 MHz, and also 1800 MHz and 1801 MHz Peak to valley, 5 MHz to 300 MHz
4-0.450.04
3 2
Pin Assignment
1. 2. 3. 4. Type A PD Cathode PD Anode LD Anode, GRD LD cathode Type C PD Anode LD Anode,PD Cathode GRD LD cathode
RF Bandpass Flatness
dB
BF
4.0
28
Telephone: 01933 461 666 Fax: 01933 461 699 e-mail: sales@laser2000.co.uk website: www.laser2000.co.uk
Laser Diodes
Safety Information
2 x 15
Pin Information
Pin No. 1 2 3 4 5 6 7 8 Description Thermistor Thermistor Dc Laser Bias (-) MPD Anode Case Ground (-) MPD Cathode (+) Thermoelectric Cooler (+) Thermoelectric Cooler (-) Case Ground Pin No. 9 10 11 12 13 14 Description Case Ground Case Ground Laser Common (+), Case Ground Laser Modulation (-) Laser Common (+), Case Ground Case Ground
Symbol
Tc Tstg If Vr Vrpd Itec
Condition
I=Iop -20 C < Tc <+65 C, Top=25 C If=150 mA
Min
-20 -40 -
0.75
12.7
8.9
Max
65 85 150 2 10 1.6
www.laser2000.co.uk
Test Conditions
Ir = Iop, CW CW, TL=25 C T=25 C Ir = Iop TL=25 C Po= Pr Ir = Iop Vrpd=5V Vrpd=5V Imon=const, =10 log (Po/Pr) [dB] T=25 C T=25 C T=40 C T=40 C
Min
1460 8 30 30 10 -40 -1 9.5 -
Typ
14 90 1.2 3900 -
Max
1620 13 20 120 1.9 150 200 85 1 10.5 1.5 1.6
14 GND ISOLATOR 13 GND (+) 12 (-) 11 GND (+) 10 GND 9 GND 8 GND
For more information on Laser 2000 products visit our website at:
Centre Wavelength Optical Output Power* Optical Isolation Side-mode Suppression Ratio Threshold Current Operating Current Forward Voltage Monitor Current Monitor Dark Current Operating Case Temperature Tracking Error Thermistor Resistance Thermistor B Constant TEC Current TEC Voltage
nm mW dB dB mA mA V A/mW nA C dB K K A V
Symbol
F | S21 |
Test Conditions
Ir=Iop 0.3 to 2200MHz T=25 C CW,Ir = Iop, f=0.3MHz to 2200MHz, Optical reflection=-40dB Two-tones 936MHz, 958MHz, OMI=0.2, Ir=Iop
Min
0.3 -
Typ
2
Max
2200 -
dB/Hz dBc
RIN IMD3
-150 -60
29
Telephone: 01933 461 666 Fax: 01933 461 699 e-mail: sales@laser2000.co.uk website: www.laser2000.co.uk
Laser Diodes
Safety Information
Power (mW)
Voltage (V)
* IEC is a registered trademark of the International Electrotechnical Commission. ** ANSI is a registered trademark of the American National Standards Institute.
20 30 40 50 60 70 80 90 Current (mA)
Output Spectrum
10 Relative Intensity (dB) 0 -10 -20 -30 -40 -50 -60 -70 1306 1307 1308 1309 1310 1311 1312 Wavelength (nm) Tc=25C CW
Max
85 100 120 2 10
Min
-20 2.0 1280 30 75 -1 30
Typ
2.5 12 35 60 1.1 1310 0.1 0.09 40 35
Max
85* 18 50 80 1.6 1335 1.0 400 200 1 -
Test Conditions
CW T=25 C T=85 C T=85 C Po=2.0 mW Po=2.0 mW, CW Po=2.0 mW Po=2.0 mW VR=5 V VR=5 V Imon=const, =10 log (Pf/2.0) [dB]
www.laser2000.co.uk
The devices feature high output power, wide operating temperature range, low distortion characteristics, low RIN noise, and high side mode suppression. Their uncooled, hermetically sealed, coaxial fiber- pigtailed packages are a cost-effective means of providing a highly linear light source for intermediate- reach and long-reach analog transmission applications.
For more information on Laser 2000 products visit our website at:
RF Characteristics Parameter
Relative Intensity Noise dB/Hz GHz GHz dBc Relaxation Oscillation Frequency Modulation Bandwidth Second-Order Intermodulation
Symbol
RIN fR BW IMD2
Min
2.5 -
Typ
4.5 -
Max
-145 -50
Test Conditions
CW,Po=2.0 mW, f=300 MHz to 1000 MHz Po=2.0mW -3dB, Po=2mW T=25 C, Po=2 mW, OMI=0.1, Two-tone test, 13 MHz and 19 MHz, 7dB plus connector loss T=25 C, Po=2.0 mW, OMI=0.1, Two-tone test, 13 MHz and 19 MHz, 7dB plus connector loss, all peaks from 5MHz to 50MHz meet this level T=25 C, Po=2.0 mW, OMI=0.1, ref. To onetone: 5 MHz to 50 MHz, 7dB plus connector loss Peak to valley, 5 MHz to 10000 MHz
0.90
300.5
Third-Order Intermodulation
4
dBc
IMD3
-55
4-0.450.04
3 2
2.000.20 P.C.D.
Pin Assignment
1. 2. 3. 4. Type A PD Cathode PD Anode LD Anode, GRD LD cathode Type C PD Anode LD Anode,PD Cathode GRD LD cathode
Carrier-to-Noise ratio
dB
CNR
50
RF Bandpass Flatness
dB
BF
1.0
30
Telephone: 01933 461 666 Fax: 01933 461 699 e-mail: sales@laser2000.co.uk website: www.laser2000.co.uk
Laser Diodes
Safety Information
Power (mW)
Caution: use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. * IEC is a registered trademark of the International Electrotechnical Commission. ** ANSI is a registered trademark of the American National Standards Institute.
Voltage (V)
20 30 40 50 60 70 80 90 Current (mA)
Output Spectrum
10 Relative Intensity (dB) 0 -10 -20 -30 -40 -50 -60 -70 1306 1307 1308 1309 1310 1311 1312 Wavelength (nm) Tc=25C CW
Max
85 100 120 2 10
Min
-20 2.0 1280 30 75 -1 30
Typ
2.2 12 35 60 1.1 1310 0.1 0.09 40 35
Max
85* 18 50 80 1.6 1340 1.0 400 200 1 -
Test Conditions
CW T=25 C T=85 C T=85 C Po=Pmin mW Po=Pmin mW, CW Po=Pmin mW Po=Pmin mW VR=5 V VR=5 V Imon=const, =10 log (Pf/Pmin) [dB]
www.laser2000.co.uk
The devices feature high output power, wide operating temperature range, low distortion characteristics, low RIN noise, and high side mode suppression. Their uncooled, hermetically sealed, coaxial fibre pigtailed packages are a cost-effective means of providing a highly linear light source for intermediate reach and long-reach analog transmission applications.
For more information on Laser 2000 products visit our website at:
RF Characteristics Parameter
Relative Intensity Noise dB/Hz GHz GHz dBc Relaxation Oscillation Frequency Modulation Bandwidth Second-Order Intermodulation
Symbol
RIN fR BW IMD2
Min
1.0 -
Typ
4.5 -
Max
-145 -50
Test Conditions
CW,Po=Pmin, f=5 MHz to 300 MHz Po=Pmin -3dB, Po=Pmin T=25 C, Po=Pmin, OMI=0.1, Two-tone test, 13 MHz and 19 MHz, 7dB plus connector loss T=25 C, Po=Pmin, OMI=0.1, Two-tone test, 13 MHz and 19 MHz, 7dB plus connector loss, all peaks from 5MHz to 50MHz meet this level T=25 C, Po=Pmin, OMI=0.1, ref. To onetone: 5 MHz to 50 MHz, 7dB plus connector loss Peak to valley, 5 MHz to 300 MHz
0.90
300.5
Third-Order Intermodulation
4
dBc
IMD3
-55
4-0.450.04
3 2
2.000.20 P.C.D.
Pin Assignment
1. 2. 3. 4. Type A PD Cathode PD Anode LD Anode, GRD LD cathode Type C PD Anode LD Anode,PD Cathode GRD LD cathode
Carrier-to-Noise ratio
dB
CNR
50
RF Bandpass Flatness
dB
BF
1.0
31
Telephone: 01933 461 666 Fax: 01933 461 699 e-mail: sales@laser2000.co.uk website: www.laser2000.co.uk
Laser Diodes
14 13 See figures 3A and 3B 12 11 10 9 8
14 NC ISOLATOR 13 (+) 12 (-) 11 (+) 10 NC 9 CASE GROUND
TEC
1 2
39nH
T1
2 3
Thermistor
3
200
4 5 6 7
Frequency Response
1pF5pF
0.01F
0.01F
Safety Information
All versions of this laser are Class 3B laser products per IEC* 60825-1:2001. Users should observe safety precautions such as those recommended by ANSI** Z136.1-2000, ANSI Z36.2- 1997 and IEC 60825-1:2001. This product does not conform to 21 CFR 1040.10 and 1040.11. Consequently, this laser module is only intended for use as a component by manufacturers of electronic products and equipment. Wavelength =1.5 m Maximum Power = 100 mW Single-mode fibre pigtail Fibre Numerical Aperture = 0.14 Labeling is not affixed to the laser module due to size constraints; rather, labeling is placed on the outside of the shipping box. PIN 12 R2 37.5 This product is not shipped with a power supply. Caution: use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. *IEC is a registered trademark of the International Electrotechnical Commission **ANSI is a registered trademark of the American National Standards Institute
TEC (-)
8 CASE GROUND
Ordering Information
The DFB-1310-BF-xx-Ax-xx DFB laser modules are designed for forward- and return- path CATV applications. The modules are designed to incorporate high output power while maintaining high linearity. The devices feature standard pin assignments (compatible with OC-48). The modules are excellent sources for use in CATV systems incorporating both PAL-D, with 60 channel loading, and NTSC, with up to 78 channels. The combination of high performance and very reasonable price make these modules the most cost- effective CATV transmitter solutions in the industry.
Tc I=Iop -20 Tstg -40 If Vr Vrpd Itec -20C < Tc <+65C, Top=25 C If=100 mA
Test Conditions
CW CW CW, TL=25 C T=25 C CW TL=25 C CW CW VR=5V VR=5V Imon=const, =10 log (Pf/Po) [dB] T=25 C T=25 C T=40 C T=40 C
Min
1290 4 30 30 10 -20 -0.5 9.5 -
Typ
1310 0.1 12 1.2 3900 -
Max
1330 1.0 31 18 120 1.7 150 200 65 0.5 10.5 1.0 2.0
www.laser2000.co.uk
26 2 PIN14
12.7
8.9
12.70
Center Wavelength Spectral Width (-20dB) Optical Output Power* Optical Isolation Side-mode Suppression Ratio Threshold Current Pin 12 to have 25 Ohm Operating Current ImpedanceMatchedInput Forward Voltage Monitor Current Monitor Dark Current Operating Case Temperature Tracking Error Thermistor Resistance Thermistor B Constant TEC Current TEC Voltage
For more information on Laser 2000 products visit our website at:
Symbol
F | S21 | RIN
Test Conditions
I=82mA 45MHz - 860MHz T=25 C CW,Po= mW, f=45MHz to 860MHz, Optical reflection=-40dB
Min
45 -
Typ Max
0.5 860 -
2 x 15
dB/Hz
-155
-150
Distortion Parameter
DFB-1310-BF-xx-A3-xx Carrier to Noise Ratio Composite Second Order Composite Triple Beat DFB-1310-BF-xx-A4-xx Carrier to Noise Ratio Composite Second Order Composite Triple Beat DFB-1310-BF-xx-A5-xx Carrier to Noise Ratio Composite Second Order Composite Triple Beat DFB-1310-BF-xx-A6-xx Carrier to Noise Ratio Composite Second Order Composite Triple Beat dB dBc dBc dB dBc dBc dB dBc dBc dB dBc dBc
Symbol
CNR CSO CTB CNR CSO CTB CNR CSO CTB CNR CSO CTB
Test Conditions
Note 1 Note 1 Note 1 Note 1 Note 1 Note 1 Note 1 Note 1 Note 1 Note 1 Note 1 Note 1
Min
53 53 51 53 -
Typ
-
Max
-63 -70 -60 -67 -60 -65 -56 -58
0.75
6.11
1.50
15 30
Dimensions in mm
Pin Information
Pin No. 1 2 3 4 5 6 7 Description Thermistor Thermistor Dc Laser Bias (-) MPDAnode Case Ground (-) MPD Cathode (+) Thermoelectric Cooler (+) Thermoelectric Cooler (-) Pin No. 8 9 10 11 12 13 14 Description Case Ground Case Ground NC Laser Common (+) Laser Modulation (-) Laser Common (+), NC
0.75
17.78
32
Note 1: Test condition: Po= Pr, OMI 3.2%, 77 unmodulated carriers (50 to 550 MHz), Received Power=-4 dBm.
Telephone: 01933 461 666 Fax: 01933 461 699 e-mail: sales@laser2000.co.uk website: www.laser2000.co.uk
Laser Diodes
Safety Information
Wavelength =1.5 m Maximum Power = 75mW Single-mode fibre pigtail Fibre Numerical Aperture = 0.14 Labeling is not affixed to the laser module due to size constraints; rather, labeling is placed on the outside of the shipping box.
Ordering Information
This product is not shipped with a power supply. Caution: use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. * IEC is a registered trademark of the International Electrotechnical Commission. ** ANSI is a registered trademark of the American National Standards Institute.
DFB-1550-C5-2-A-xx-x-x
Connector SC=SC/PC FC=FC/PC SA=SC/APC FA=FC/APC NC=No Connector Temperature A=-20C to 85C B=-20C to 75 Pin Assignment A= Pin Type A C= Pin Type C
Symbol
Tc Tstg If Vr Vrpd
Condition
I=Iop -
Min
-20 -40 -
Max
85 100 150 2 10
Min
-20 2.0 1530 30 25 -1 30
Typ
14 40 60 1.1 1550 0.1 0.11 40 -
Max
85* 20 55 80 1.6 1570 1.0 375 200 1 -
Test Conditions
CW T=25 C T=85 C T=85 C Po=2.0 mW Po=2.0 mW, CW Po=2.0 mW Po=2.0 mW Vrpd=5 V Vrpd=5 V Imon=const, =10 log (Po/2.0) [dB]
www.laser2000.co.uk
The devices feature high output power, wide operating temperature range, low distortion characteristics, low RIN noise, and high side mode suppression. Their uncooled, hermetically sealed, coaxial fibre pigtailed packages are a cost-effective means of providing a highly linear light source for intermediate reach and long-reach analog transmission applications.
Parameters are at 25 C unless otherwise noted. * See Ordering Options for operating temperature ranges available.
For more information on Laser 2000 products visit our website at:
RF Characteristics Parameter
Relative Intensity Noise dB/Hz dBc
Symbol
RIN IMD2
Min
-
Typ
-
Max
-140 -50
Test Conditions
CW,Po=2.0 mW, f=5 MHz to 300 MHz T=25 C, Po=2.0 mW, OMI=0.1, Two-tone test, 13 MHz and 19 MHz, Receiver power: -4 dBm T=25 C, Po=2.0 mW, OMI=0.1, Two-tone test, 13 MHz and 19 MHz, Receiver power: -4 dBm T=25 C, Po=2.0 mW, OMI=0.1, ref. To onetone: 5 MHz to 50 MHz, Receiver power: -4 cBm Peak to valley, 5 MHz to 300 MHz
0.90
Second-Order Intermodulation
4-0.450.04
3 2
Pin Assignment
1. 2. 3. 4. Type A PD Cathode PD Anode LD Anode, GRD LD cathode Type C PD Anode LD Anode,PD Cathode GRD LD cathode
RF Bandpass Flatness
dB
BF
1.0
33
Telephone: 01933 461 666 Fax: 01933 461 699 e-mail: sales@laser2000.co.uk website: www.laser2000.co.uk
Laser Diodes
Safety Information
Wavelength =1.5 m Maximum Power = 75mW Single-mode fibre pigtail Fibre Numerical Aperture = 0.14 Labeling is not affixed to the laser module due to size constraints; rather, labeling is placed on the outside of the shipping box. This product is not shipped with a power supply. Caution: use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. * IEC is a registered trademark of the International Electrotechnical Commission. ** ANSI is a registered trademark of the American National Standards Institute.
Symbol
Tc Tstg If Vr Vrpd
Condition
I=Iop -
Min
-20 -40 -
Max
70 100 150 2 10
Min
-20 2.0 1530 30 75 -1 30
Typ
17 40 85 1.1 1550 0.1 0.11 40 35
Max
70 25 55 110 1.6 1570 1.0 400 200 1 -
Test Conditions
CW T=25 C T=85 C T=85 C Po=2.0 mW Po=2.0 mW, CW Po=2.0 mW Po=2.0 mW Vrpd=5 V Vrpd=5 V Imon=const, =10 log (Po/2.0) [dB]
www.laser2000.co.uk
The devices feature high output power, wide operating temperature range, low distortion characteristics, low RIN noise, and high side mode suppression. Their uncooled, hermetically sealed, coaxial fibre- pigtailed packages are a cost-effective means of providing a highly linear light source for intermediate- reach and long-reach analog transmission applications.
RF Characteristics Parameter
Relative Intensity Noise dB/Hz GHz dBc
Symbol
RIN BW IMD2
Min
3 -
Typ
-
Max
-135 -50
Test Conditions
CW,Po=2.0 mW, f=5 MHz to 300 MHz -3dB, Po=2mW T=25 C, Po=2 mW, OMI=0.1, Two-tone test, 13 MHz and 19 MHz, 7dB plus connector loss T=25 C, Po=2.0 mW, OMI=0.1, Two-tone test, 13 MHz and 19 MHz, 7dB plus connector loss, all peaks from 5MHz to 50MHz meet this level T=25 C, Po=2.0 mW, OMI=0.1, ref. To onetone: 5 MHz to 50 MHz, 7dB plus connector loss Peak to valley, 5 MHz to 300 MHz
For more information on Laser 2000 products visit our website at:
0.90
300.5
Third-Order Intermodulation
dBc
IMD3
-55
4-0.450.04
3 2
Pin Assignment
1. 2. 3. 4. Type A PD Cathode PD Anode LD Anode, GRD LD cathode Type C PD Anode LD Anode,PD Cathode GRD LD cathode
RF Bandpass Flatness
dB
BF
1.0
34
Telephone: 01933 461 666 Fax: 01933 461 699 e-mail: sales@laser2000.co.uk website: www.laser2000.co.uk
Laser Diodes
Safety Information
Wavelength =1.5 m Maximum Power = 100 mW Single-mode fibre pigtail Fibre Numerical Aperture = 0.14
2 x 15
Caution: use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.
Pin Information
Pin No. 1 2 3 4 5 6 7 8 Description Thermistor Thermistor Dc Laser Bias (-) MPD Anode Case Ground (-) MPD Cathode (+) Thermoelectric Cooler (+) Thermoelectric Cooler (-) Case Ground Pin No. 9 10 11 12 13 14 Description Case Ground Case Ground Laser Common (+), Case Ground Laser Modulation (-) Laser Common (+), Case Ground Case Ground
Symbol
Tc Tstg If Vr Vrpd Itec
Condition
I=Iop -20 C < Tc <+65 C, Top=25 C If=100 mA
Min
-20 -40 -
0.75
17.78
12.7
8.9
Max
65 85 120 2 10 1.5
www.laser2000.co.uk
Test Conditions
Po= Pr, CW CW, TL=25 C T=25 C Po= Pr TL=25 C Po= Pr Po= Pr Vrpd=5V Vrpd=5V Imon=const, =10 log (Po/Pr) [dB] T=25 C T=25 C T=40 C T=40 C
Min
1530 6.0 30 30 15 -20 -0.5 9.5 -
Typ
1545 14 80 1.2 3900 -
Max
1560 10.0 20 120 1.9 150 200 65 0.5 10.5 1.5 2.0
14 GND ISOLATOR 13 GND (+) 12 (-) 11 GND (+) 10 GND 9 GND 8 GND
For more information on Laser 2000 products visit our website at:
Symbol
F | S21 |
Test Conditions
If=Iop 45MHz - 860MHz T=25 C CW,Po= Pr, f=45 MHz to 860MHz, Optical reflection=-40dB Note 1 Note 1 Note 1
Min
45 -
Typ Max
0.5 860 -
Relative Intensity Noise Composite Second Order Distortion Composite Triple Beat Carrier to Noise Ratio
51
-155 -
-51 -63 -
35
Note 1: Test condition: Po= Pr, OMI=3.2%/ch., 77 unmodulated carriers (50 to 550 MHz), received power= 0 dBm.
Telephone: 01933 461 666 Fax: 01933 461 699 e-mail: sales@laser2000.co.uk website: www.laser2000.co.uk
Laser Diodes
1 2
39nH
Thermistor
All versions of this laser are Class 3B laser products per IEC* 60825-1:2001. Users should observe safety precautions such as those recommended by ANSI** Z136.1-2000, ANSI Z36.2- 1997 and IEC 60825-1:2001. This product does not conform to 21 CFR 1040.10 and 1040.11. Consequently, this laser module is only intended for use as a component by manufacturers of electronic products and equipment. Wavelength =1.5 m Maximum Power = 100 mW Single-mode fibre pigtail Fibre Numerical Aperture = 0.14 Labeling is not affixed to the laser module due to size constraints; rather, labeling is placed on the outside of the shipping box. This product is not shipped with a power supply. Caution: use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. *IEC is a registered trademark of the International Electrotechnical Commission **ANSI is a registered trademark of the American National Standards Institute
12 11 10 9 8
3
200
4 5 6 7
TEC (-)
Standard OC-48 pin compatibility Negative bias Optimized for PAL-D and NTSC channel counts Output power to 10 mW Meets GR 468 reliability specifications Applications CATV forward and return path 1550-nm broadcast and point-to-point applications
26
1pF5pF
0.01F
0.01F
Symbol
C C mA V V A Tc Tstg If Vr Vrpd Itec
Condition
I=Iop -20 C < Tc <+65 C, Top=25 C If=100 mA
Min
-20 -40 -
Max
65 85 120 2 10 1.5
www.laser2000.co.uk
PIN14
12.7
8.9
Test Conditions
Po= Pr, CW CW, TL=25 C T=25 C Po= Pr TL=25 C Po= Pr Po= Pr Vrpd=5V Vrpd=5V Imon=const, =10 log (Po/Pr) [dB] T=25 C T=25 C T=40 C T=40 C
Min
1530 10.0 30 30 15 -20 -0.5 9.5 -
Typ
1545 20 120 1.2 3900 -
Max
1560 35 150 1.9 150 200 65 0.5 10.5 1.0 2.0
6.35 PIN1 12.70 9.38 0.75 6.11 1.50 15 30 Dimensions in mm 0.75 17.78 6.35 1.9 20.83 2 x Ceramic Body
For more information on Laser 2000 products visit our website at:
2 x 15
2 x Lead Rack
Pin Information
Pin No. 1 2 3 4 5 6 7 Description Pin No. Thermistor 8 Thermistor 9 Dc Laser Bias (-) 10 MPDAnode Case Ground (-) 11 MPD Cathode (+) 12 Thermoelectric Cooler (+) 13 Thermoelectric Cooler (-) 14 Description Case Ground Case Ground NC Laser Common (+) Laser Modulation (-) Laser Common (+), NC
Symbol
F | S21 |
Test Conditions
If=Iop 45MHz - 860MHz T=25 C CW,Po= Pr, f=45 MHz to 860MHz, Optical reflection=-40dB Note 1, 2 Note 1, 3 Note 1
Min
45 -
Typ
0.5
Max
860 -
Relative Intensity Noise Composite Second Order Distortion Composite Triple Beat Carrier to Noise Ratio
53
-155 -
-50 -60 -
36
Note 1: Test condition: Po = 10mW, OMI 10%, eight channels, Received Power = -4dBm. Note 3: Measured at 553.25MHz, 577.25MHz, and 595.25MHz
Telephone: 01933 461 666 Fax: 01933 461 699 e-mail: sales@laser2000.co.uk website: www.laser2000.co.uk
Laser Diodes
Safety Information
Symbol
Tc Tstg If Vr Vrpd
Condition
I=Iop -
Min
-20 -40 -
Max
75 100 120 2 10
Min
-20 2.0 1510 -3 30 75 -1 30
Typ
14 35 70 1.1 0.1 0.11 40 35
Max
75* 20 50 100 1.6 1570 +3 1.0 400 200 1 -
Test Conditions
CW T=25 C T=75 C T=75 C Po=2.0 mW Po=2.0 mW, CW Po=2.0mW, CW, T=25C Po=2.0 mW Po=2 mW Vrpd=5 V Vrpd=5 V Imon=const, =10 log (Po/2.0) [dB]
www.laser2000.co.uk
The devices feature multiple available wavelengths on the ITU CWDM grid, low distortion characteristics, low RIN noise, and high side mode suppression. Their uncooled, hermetically sealed, coaxial fibre- pigtailed packages are a cost-effective means of providing a highly linear light source for intermediate- reach and long-reach analog transmission applications.
Parameters are at 25 C unless otherwise noted. * See Ordering Options for operating temperature ranges available.
RF Characteristics Parameter
Relative Intensity Noise Relaxation Oscillation Frequency Modulation Bandwidth Second-Order Intermodulation dB/Hz GHz GHz dBc
Symbol
RIN fR BW IMD2
Min
1.0 -
Typ
4.5 -
Max
-145 -50
Test Conditions
CW,Po=2.0 mW, f=5 MHz to 300 MHz Po=2.0mW -3dB, Po=2.0mW T=25 C, Po=2 mW, OMI=0.1, Two-tone test, 13 MHz and 19 MHz, 7dB plus connector loss T=25 C, Po=2.0 mW, OMI=0.1, Two-tone test, 13 MHz and 19 MHz, 7dB plus connector loss, all peaks from 5MHz to 50MHz meet this level T=25 C, Po=2.0 mW, OMI=0.1, ref. To onetone: 5 MHz to 50 MHz, 7dB plus connector loss Peak to valley, 5 MHz to 300 MHz
For more information on Laser 2000 products visit our website at:
0.90
4-0.450.04
3 2
2.000.20 P.C.D.
Pin Assignment
1. 2. 3. 4. Type A PD Cathode PD Anode LD Anode, GRD LD cathode Type C PD Anode LD Anode,PD Cathode GRD LD cathode
Carrier-to-Noise ratio
dB
CNR
50
RF Bandpass Flatness
dB
BF
1.0
37
Telephone: 01933 461 666 Fax: 01933 461 699 e-mail: sales@laser2000.co.uk website: www.laser2000.co.uk
Laser Diodes
4 3 2 -20 C 1 0 0 10 20 30 40 50 Current (mA) 25 C
Safety Information
All versions of this laser are Class 3B laser products per IEC* 60825-1:2001. Users should observe safety precautions such as those recommended by ANSI** Z136.1-2000, ANSI Z36.2-1997 and IEC 60825-1:2001.
Power (mW)
Voltage (V)
70 C
85 C
60
70 80
0.0 0 10
This product does not conform to 21 CFR 1040.10 and 1040.11. Consequently, this laser module is only intended for use as a 20 30 40 50 60 70 80 90 component by manufacturers of Current (mA) electronic products and equipment. Wavelength =1.3 m Maximum Power = 75mW Single-mode fibre pigtail Fibre Numerical Aperture = 0.14 Labeling is not affixed to the laser module due to size constraints; rather, labeling is placed on the outside of the shipping box. This product is not shipped with a power supply. Caution: use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. * IEC is a registered trademark of the International Electrotechnical Commission. ** ANSI is a registered trademark of the American National Standards Institute.
0.5
1.0
1.5
2.0
2.5
Ordering Information D F B - 1 x x x - C X - 2 - 3 . 2 - x x - x - x - x
Wavelength 275=1275nm=1 300=1300nm=2 325=1325nm=3 349=1349nm=4 Connector Temperature SC=SC/PC A=-20C to 85C FC=FC/PC B=-20C to 75 SA=SC/APC FA=FC/APC NC=No Connector Pin Assignment Isolator A= Pin Type A I=Single-stage Isolator C= Pin Type C N=Not Isolated
Symbol
Tc Tstg If Vr Vrpd
Condition
I=Iop -
Min
-20 -40 -
Max
85 100 120 2 10
www.laser2000.co.uk
Their uncooled, hermetically sealed, coaxial fibre-pigtailed packages are a cost-effective means of implementing a Wide-Wavelength Division Multiplexed transmitter in the 1310-nm band.
Min
0 2 1270 1294 1319 1343 75 -1 30
Typ
2.2 12 35 1.1 22 60 1275 1300 1325 1349 0.1 0.09 4.5 -130 35
Max
85 18 50 1.6 35 75 1282 1306 1331 1355 0.62 0.1 0 0.1 400 200 -120 1 -
Test Conditions
CW T=25 C T=85 C Po=2.0 mW Po=2.0mW, T=25 C Po=2.0mW, T=85 C Po=2.0 mW, CW
C mW mA V mA nm
For more information on Laser 2000 products visit our website at:
0.90
300.5
4-0.450.04
3 2
2.000.20 P.C.D.
Pin Assignment
1. 2. 3. 4. Type A PD Cathode PD Anode LD Anode, GRD LD cathode Type C PD Anode LD Anode,PD Cathode GRD LD cathode
RMS Spectral Width Wavelength temperature coefficient Side-mode Suppression Ratio Rise / Fall Times Relaxation Oscillation Frequency Monitor Current Monitor Dark Current Relative Intensity Noise Tracking Error Optical Isolation*
Po=2.0mW Po=2.0 mW Ppeak=2.0mW, 20% to 80% Po=2.0mW Vrpd=5 V Vrpd=5 V Po=2.0mW, 30db isolation Imon=const, =10 log (Pf/2.0) [dB]
* Optical isolation is only applicable to devices that include the optical isolator option.
38
Telephone: 01933 461 666 Fax: 01933 461 699 e-mail: sales@laser2000.co.uk website: www.laser2000.co.uk
Laser Diodes
240mW @ any wave leng from 1385 nm - 1510n th m!
A1948 PLI
SM NIR >100mW
Butterfly Package - A 1998 PLM / A 1948 PLI / A 1943 RAP MB51 & MB52
20.83 Rigid, 33.9 1.016 5.4 5.3 (max.) 5.9 0.3
0.05
1.25 1.85
A1943 RAP
Any wavelength from 1385 - 1510nm From 180 to 230mW output power versions 2nm linewidth Full performance in operating case temperature from -5C to +70C
6.35
8 9 1011121314
14x(0.5x0.20.06)
Dimensions in mm
Description
PIN PIN PIN PIN PIN PIN PIN PIN PIN PIN PIN PIN PIN PIN 1: 2: 3: 4: 5: 6: 7: 8: 9: 10: 11: 12: 13: 14: Peltier Cooler (+) Thermistor Photodetector Anode Photodetector Cathode Thermistor NC NC NC NC Laser Anode Laser Cathode NC Case Peltier Cooler (-)
www.laser2000.co.uk
For more information on Laser 2000 products visit our website at:
The 1943 RAP module contains a SLMQW 1480nm high power laser. The wavelength is locked at a precise value with a Fibre Bragg Grating located in the pigtail. It incorporates a thermo-electric cooler, precision NTC thermistor, monitor photodiode and is pigtailed with a Polarisation Maintaining Fibre (PMF) for stable operation under all conditions. This pump module is available at any wavelength in 0.5nm steps from 1355-1510nm.
Optical characteristics
Parameter Min.
Threshold Current (Ith) Output Power Options mA mW mW mW mW mW V A nm nA pF k A V 140 160 180 190 200 300 1460 15 50 15 10.5 1.3 4.2 9.5
Max.
65
Min.
180 200 230
Forward Voltage (Vf) Monitoring Current Wavelength Range Spectral Width (RMS) Photodiode Dark Current Photodiode Capacitance Thermistor Resistance TEC Current (Itec) TEC Voltage (Vtec)
2.1
9.5
39
Telephone: 01933 461 666 Fax: 01933 461 699 e-mail: sales@laser2000.co.uk website: www.laser2000.co.uk
Laser Diodes
SM NIR >100mW
Dimensions (mm)
min. 1800
0.2
6 x 2.54
0.5 min. 13
15.2
12.7
8.9
26.0
30.0 20.83
LU0808M100
Up to 100mW operation power Wavelength 790 - 810nm High kink-free power Proven reliability for high power operation Cooled 14-pin package Very powerful chip design Singlemode fibre pigtail Fibre Bragg Grating stabilised on request
5.40
5.10 7 6 5 4 3 2 1
Function
Cooler (+) Thermistor PD Anode (-) PD Cathode (+) Thermistor NC NC
Pin
8 9 10 11 12 13 14
Function
NC NC LD Anode (+) LD Cathode (-) nc Case Ground Cooler (-)
The Lumics LU0808M100 laser diode module contains an optimised InGaAsP/GaInP/AIGaAs quantum well high power laser on GaAs substrate. The extremely stringent reliability requirements are achieved through our patent pending innovative technology. This includes careful design, exactly defined manufacturing and extensive testing. The qualification contains a set of optoelectronic, thermal and mechanical tests. Each laser diode module is individually serialised for traceability and is shipped with a specified set of test data.
8 9 10 11 12 13 14
Symbol
Tmax TOP, max IF, max VR, max IF, PD VR, PD ITEC VTEC -
Min
-40 -20 25
Max
85 70 260 40.0 0.3 5 20 1.8 3.2 500 -
www.laser2000.co.uk
Ordering Information
LU Lumics 0980 Wavelength M Modul 250 Power (POP) xxx Version
- Fibre Type - Termination -FBG
For more information on Laser 2000 products visit our website at:
Characteristics Parameter
Operating Power LU0800M100 Kink Free (1) Power Operating Forward Current LU0980M100 Threshold Current Forward Voltage Peak Wavelength Spectral Width (FWHM) Optical Power Stability Spectral Shift With Temp. Monitor Responsivity Monitor Dark Current TEC Current TEC Voltage Thermistor Resistance Thermistor Constant Fibre Type
(1) (2)
Code / Conditions
mW mW
(2)
Symbol
POP Pk IOP
Min
100 790 1 9.5 3850 -
Typ
1.2 * POP 250 80 2.0 0.3 3 5 0.8 2.1 10 3892 -
Max
300 100 2.5 810 4 0.5 20 40 10.5 3900 -
Ith VOP at IOP as specified 10nm lpeak at POP, no FBG POP/t at IOP, t = 60 sec Chip Temp. /T R chip 25C, case 70C ITEC chip 25C, case 70C VTEC T = 25C Rth B Singlemode FS-SN-4224, NA 0.12
kink-free is defined as ldL/dl - <dL/dl> | <0.2, where <dL/dl> is the average slope efficiency below kink Operating current (power) is the maximum current (power) where slope efficiency does not decrease by more than 20% from average between 1.8x - 3.0x threshold to 120% of the maximum rated output power.
40
Telephone: 01933 461 666 Fax: 01933 461 699 e-mail: sales@laser2000.co.uk website: www.laser2000.co.uk
Laser Diodes
SM NIR >100mW
Dimensions (mm)
min. 1800
0.2
6 x 2.54
0.5 min. 13
15.2
12.7
8.9
26.0
30.0 20.83
LU0845M100
Up to 100mW operation power Wavelength 840-860nm High kink-free power Proven reliability for high power operation Cooled 14-pin package Very powerful chip design Singlemode fibre pigtail Fibre Bragg Grating stabilised on request
5.40
5.10 7 6 5 4 3 2 1
Function
Cooler (+) Thermistor PD Anode (-) PD Cathode (+) Thermistor NC NC
Pin
8 9 10 11 12 13 14
Function
NC NC LD Anode (+) LD Cathode (-) nc Case Ground Cooler (-)
The Lumics LU0845M100 laser diode module contains an optimised InGaAsP/GaInP/AIGaAs quantum well high power laser on GaAs substrate. The extremely stringent reliability requirements are achieved through our patent pending innovative technology. This includes careful design, exactly defined manufacturing and extensive testing. The qualification contains a set of optoelectronic, thermal and mechanical tests. Each laser diode module is individually serialised for traceability and is shipped with a specified set of test data.
8 9 10 11 12 13 14
Symbol
Tmax TOP, max IF, max VR, max IF, PD VR, PD ITEC VTEC -
Min
-40 -20 25
Max
85 40 260 300 0.3 5 20 1.8 3.2 500 -
www.laser2000.co.uk
Ordering Information
LU Lumics 0855 Wavelength M Modul 200 Power (POP) xxx Version
- Fibre Type - Termination -FBG
For more information on Laser 2000 products visit our website at:
Characteristics Parameter
Operating Power LU0850M100 Operating Forward Current LU0850M100 Threshold Current Forward Voltage Peak Wavelength Spectral Width (FWHM) Optical Power Stability Spectral Shift With Temp. Monitor Responsivity Monitor Dark Current TEC Current TEC Voltage Thermistor Resistance Thermistor Constant Fibre Type mW mA mA V nm nm % % A/mW nA A V kOhm K -
Code / Conditions
IOP = <240mA POP = 100mW at IOP as specified 10nm at POP, no FBG at IOP, t = 60sec Chip Temp. chip 25C, case 70C chip 25C, case 70C T = 25C Singlemode
Symbol
POP IOP Ith VOP peak POP/t /T R ITEC VTEC Rth B -
Min
100 800 1 9.5 3850 -
Typ
200 100 1.65 845 1 0.3 3 5 0.8 2.1 10 3892 -
Max
250 150 2 860 4 0.5 20 40 10.5 3900 -
41
Telephone: 01933 461 666 Fax: 01933 461 699 e-mail: sales@laser2000.co.uk website: www.laser2000.co.uk
Laser Diodes
SM NIR >100mW
Dimensions (mm)
min. 1800
0.2
6 x 2.54
0.5 min. 13
15.2
12.7
8.9
Up to 400mW Pulse Power Up to 200Mbit/s Wavelength 840 - 860nm Operation power up to 200mW CW Proven reliability for high power operation Cooled 14-pin package Very powerful chip design Singlemode fibre pigtail Fibre Bragg Grating stabilised on request
5.40
5.10 7 6 5 4 3 2 1
Function
Cooler (+) Thermistor PD Anode (-) PD Cathode (+) Thermistor NC NC
Pin
8 9 10 11 12 13 14
Function
NC NC LD Anode (+) LD Cathode (-) nc Case Ground Cooler (-)
The Lumics LU0845M200 module is a high power directly modulated laser source designed for free space communication. It provides high pulse power up to 400mW with rise and fall times in the nsec range. The laser diode contains an optimised InGaAsP / GaInP / AlGaAs quantum well high power laser on GaAs substrate. The extremely stringent reliability requirements are achieved through our patent pending innovative technology. This includes careful design, exactly defined manufacturing and extensive testing. The qualification contains a set of optoelectronic, thermal and mechanical tests. Each laser diode module is individually serialised for traceability and is shipped with a specific set of test data.
8 9 10 11 12 13 14
www.laser2000.co.uk
Ordering Information
LU Lumics 0845 Wavelength M Modul 200 Power (POP) xxx Version
- Fibre Type - Termination - FBG
For more information on Laser 2000 products visit our website at:
Characteristics Parameter
Operating Power Operating Forward Current Threshold Current Forward Voltage Peak Wavelength Spectral Width (FWHM) Optical Power Stability Spectral Shift With Temp. Monitor Responsivity Monitor Dark Current TEC Current TEC Voltage Thermistor Resistance Thermistor Constant Fibre Type mW mA mA V nm nm % nm/C A/mW nA A V kOhm K
Conditions
CW Operation Pop = 200mW at Iop as specified 10nm at Pop, no FBG at Iop, t = 60sec Chip Temp. chip 25C, case 70C chip 25C, case 70C T = 25C Singlemode
Symbol
Pop Iop Ith Vop peak Pop/t /T R ITEC VTEC Rth B
Min
200 800 1 9.5 3850
Typ
400 90 1.65 845 1 0.3 3 5 0.8 2.1 10 3892
Max
450 150 2 860 4 0.5 20 40 10.5 3900
Symbol
Tmax Top, max IF, max VR, max IF, PD VR, PD ITEC VTEC -
Min
-40 -20 25
Max
85 40 260 300 0.3 5 20 1.8 3.2 500 -
42
Telephone: 01933 461 666 Fax: 01933 461 699 e-mail: sales@laser2000.co.uk website: www.laser2000.co.uk
Laser Diodes
0.2 6 x 2.54
SM NIR >100mW
Dimensions (mm)
0.5 min. 13
15.2
12.7
8.9
5.40
5.10 7 6 5 4 3 2 1
Function
Cooler (+) Thermistor PD Anode (-) PD Cathode (+) Thermistor NC NC
Pin
8 9 10 11 12 13 14
Function
NC NC LD Anode (+) LD Cathode (-) nc Case Ground Cooler (-)
The Lumics LU0940M200 laser diode module contains an optimised GaAs substrate based quantum well high power laser. It has been designed for customer specific applications and is available with special FBGs and fibres. The extremely stringent reliability requirements are achieved through our patent pending innovative technology. This includes careful design, exactly defined manufacturing and extensive testing. The qualification contains a set of optoelectronic, thermal and mechanical tests. Each laser diode module is individually serialised for traceability and is shipped with a specified set of test data.
8 9 10 11 12 13 14
Symbol
Tmax TOP, case TOP, chip IOP IP (Pulse 200ns/Period 30sec) VR, max IF, PD VR, PD ITEC VTEC HI 1060
Min
-40 -20 20 25
Max
85 70 30 260 500 2.0 0.3 5 20 1.8 3.2 500 -
www.laser2000.co.uk
Ordering Information
LU Lumics xxxx Wavelength to be spec. M Modul 200 Power (POP) xxx Version
- Fibre Type - Termination -FBG
Characteristics Parameter
Operating Power (940nm) Kink Free (1) Power Operating Current (2) Threshold Current Forward Voltage Peak Wavelength Spectral Width (FWHM) Optical Power Stability Polarisation: ex facet from chip Spectral Shift With Temp. Side Mode Suppression Pulsed Operation Peak Power Monitor Responsivity Monitor Dark Current TEC Current TEC Voltage Thermistor Resistance Thermistor B Constant Fibre Specifications Fibre Type Cut-off Wavelength Core Diameter (MFD) Outer Diameter Numeric Aperture
(1) (2)
Code / Conditions
mW mW mA mA V nm nm % dB nm/C dB W W A/mW nA A V kOhm K LU0940M200 at 25C POP = 200mW at IOP at POP at IOP, t=60sec TEM00 at POP 10kHz, 0.2sec 10kHz, 0.1sec chip 25C, case 70C chip 25C, case 70C T = 25C -
Symbol
POP PK IOP Ith VOP peak POP/t /T R ITEC VTEC Rth B
Min
200 930 40 -20 1 2 1 9.5 3850
Typ
1.2*POP 340 55 1.6 940 2 0.3 3 5 0.8 2.1 10 3892
Max
380 100 2.0 950 0.5 20 40 10.5 3900
For more information on Laser 2000 products visit our website at:
Kink-free is defined as ldL/dl - <dL/dl>, where <dL/dl> is the average slope efficiency below kink. Operating current (power) is the maximum current (power) where the slope efficiency does not decrease by more than 20% from average between (3) P95 is defined as 95% of total spectral power 1.8x - 3.0x threshold to 120% of the maximum rated output power.
43
Telephone: 01933 461 666 Fax: 01933 461 699 e-mail: sales@laser2000.co.uk website: www.laser2000.co.uk
Laser Diodes
1055nm Laser Module
LU1055M200
Wavelength 1055nm High kink-free power Proven reliability for high power operation Cooled 14-pin package Very powerful chip design Singlemode fibre pigtail Fibre Bragg Grating stabilisation on request Pin
The Lumics LU1055M200 laser diode module contains an optimised GaAs substrate based quantum well high power laser. It has been designed for customer specific applications and is available with special FBGs and fibres. The extremely stringent reliability requirements are achieved through our patent pending innovative technology. This includes careful design, exactly defined manufacturing and extensive testing. The qualification contains a set of optoelectronic, thermal and mechanical tests. Each laser diode module is individually serialised for traceability and is shipped with a specified set of test data. 1 2 3 4 5 6 7
SM NIR >100mW
Pin Connections
7 6 5 4 3 2 1
8 9 10 11 12 13 14
Function
Cooler (+) Thermistor PD Anode (-) PD Cathode (+) Thermistor NC NC
Pin
8 9 10 11 12 13 14
Function
NC NC LD Anode (+) LD Cathode (-) nc Case Ground Cooler (-)
Ordering Information
LU Lumics xxxx Wavelength to be spec. M Modul 200 Power (POP) xxx Version
Dimensions (mm)
15.2
12.7
www.laser2000.co.uk
Storage Temp. Operating Case Temp. Operating Chip Temp. Soldering Temp. (max. 10 sec) LD Forward Current LD Forward Current LD Reverse Voltage Monitor Forward Current Monitor Reverse Voltage TEC Current TEC Voltage ESD Damage Fibre Pigtail Bend Radius
C C C C mA A V mA V A V V mm
-40 TOP, case -20 TOP, chip 20 IOP IP (Pulse 200ns/Period 30sec) VR, max IF, PD VR, PD ITEC VTEC HI 1060 25
Tmax
8.9
Symbol
Min
Max
min. 13
0.2
6 x 2.54
0.5
Characteristics Parameter
Operating Power (1055nm) Kink Free (1) Power Operating Current (2) Threshold Current Forward Voltage Peak Wavelength Spectral Width (FWHM) Optical Power Stability Polarisation: ex Facet From Chip Spectral Shift With Temp. Side Mode Suppression Pulsed Operation Peak Power Monitor Responsivity Monitor Dark Current TEC Current TEC Voltage Thermistor Resistance Thermistor B Constant Fibre Specifications Fibre Type Cut-Off Wavelength Core Diameter (MFD) Outer Diameter Numeric Aperture mW mW mA mA V nm nm nm dB nm/C dB W W A/mW nA A V kOhm K
Code / Conditions
LU1055M200 at 25C POP = 150mW at IOP at POP at IOP, t = 60 sec TEM00 at POP, with FBG 10kHz, 0.2 sec 10kHz, 0.1sec chip 25C, case 70C chip 25C, case 70C T = 25C -
Symbol
POP PK IOP Ith VOP peak POP/t /T R ITEC VTEC Rth B
Min
200 1050 40 -20 1 2 1 9.5 3850
5.40
Typ
1.2*POP 430 50 1.57 1055 2 0.3 3 5 0.8 2.1 10 3892
Max
480 100 1.85 1060 0.5 20 40 10.5 3900
For more information on Laser 2000 products visit our website at:
(1) Kink-free is defined as ldL/dl - <dL/dl> | <0.2, where <dL/dl> is the average slope efficiency below kink (2) Operating current (power) is the maximum current (power) where the slope efficiency does not decrease by more than 20% from average between 1.8x - 3.0x threshold to 120% of the maximum rated output power. (3) l P95 is defined as 95% of total spectral power
44
Telephone: 01933 461 666 Fax: 01933 461 699 e-mail: sales@laser2000.co.uk website: www.laser2000.co.uk
5.10
Laser Diodes
+0.2 -0.2
SM NIR >100mW
Dimensions (mm)
12.7 No. 4
15
30
1500
+0.2 -0.2
No. 1 FBG
7.37 No. 5
No. 8
LU0980M200-2
+0.2 -0.2
2.8
2.54 0.5
0.25 7.62
+0.20 -0.20
The Lumics LU980M200-2 laser diode module contains an optimised GaAs / AlGaAs / InGaAs quantum well high power laser. It has been specifically designed for applications in the low noise high power Erbium Doped Fibre Amplifiers (EDFA). The extremely stringent reliability requirements are achieved through our patent pending innovative technology. This includes careful design, exactly defined manufacturing and extensive testing. The qualification contains a set of optoelectronic, thermal and mechanical tests. Each laser diode module is individually serialised for traceability and is shipped with a specified set of test data. Reliability tests according to Telcordia GR-468-CORE are ongoing at present.
www.laser2000.co.uk
Conditions
@0C @25C @70C 0 - 70C 0 - 70C (FBG) (Integration band 1.5nm) VR = 5V, Tcase Tsubmount = 25C Pop = 200mW BOL Pop = 200mW EOL Pop = 110mW BOL Pop = 110mW EOL Singlemode Fibre -
Symbol
Ith Vop -
Min.
974 20 90 3.0 9.5 25 0.5 1
Typ.
40 40 56 977 0.5 5 5.0 680 815 400 480 -
Max.
60 60 75 1.7 985 2 40 30.0 10.5 800 960 500 600 2
For more information on Laser 2000 products visit our website at:
LD Operating Voltage Centre Wavelength (lc) Spectral Width (DlFWHM) Side Mode Suppression Ratio Power-In-Band Photodetector Dark Current (ID) Photodetector Responsivity / dlp / dP) Thermistor Resistance (Rth) Total Power Consumption
V nm nm dB % nA A/mW K mW
Note: Absolute Maximum Ratings may be applied to the laser module for short periods of time only. Exposure to maximum ratings for extended period of time or exposure above one or more max ratings may cause damage or affect the reliability of the device.
Fibre Type (Corning HI1060 / PM980) Fibre Bend Radius Pigtail Length After Grating Module To Grating Distance Important Notes:
(1)
mm m m
kink-free is defined as ldL/dl - <dL/dl>| <0.2, where <dL/dl> is the average slope efficiency below kink. The module is kink free (at least) up to a minimum kink-free power Pk that the module will achieve at a device-specific current, the kink-free current lk. The individual value of lk is noted on the hardcopy of the test report shipped with the device. All values of lk are limited by values listed in Table Absolute Maximum Ratings. (2) Operating current (power) is the maximum current (power) where the slope efficiency does not decrease by more than 20% from average between 20mW and 120% of maximum operating power Pop. The maximum operating power Pop will be achieved at a device-specific current, the maximum operating current Iop. The individual value of Iop is noted on the hardcopy of the test report shipped with the device. All values of Iop are limited by the values listed in table Absolute Maximum Ratings. The pump laser shall never be operated at a power higher than the maximum operating current Iop that is noted in the test report shipped with the device. At Begin Of Life (BOL), the operating current shall never be higher than the maximum operating current Iop that is noted in the test report shipped with the device. At End Of Life (EOL), the operating current shall never be higher than the device-specific kink free current lk that is noted in the test report. (3) lP95 is defined as 95% of total spectral power.
6 7
45
Telephone: 01933 461 666 Fax: 01933 461 699 e-mail: sales@laser2000.co.uk website: www.laser2000.co.uk
Laser Diodes
0.2 6 x 2.54
SM NIR >100mW
Dimensions (mm)
0.5 min. 13
15.2
12.7
8.9
Up to 330mW power Wavelength 972 - 985nm High kink-free power up to 400mW Proven reliability for high power operation Cooled 14-pin package Very powerful chip design Singlemode fibre pigtail Fibre Bragg Grating stabilised
5.40
5.10 7 6 5 4 3 2 1
LU0980M330
Function
Cooler (+) Thermistor PD Anode (-) PD Cathode (+) Thermistor NC NC
Pin
8 9 10 11 12 13 14
Function
NC NC LD Anode (+) LD Cathode (-) nc Case Ground Cooler (-)
The Lumics LU0980M330 laser diode module contains an optimised GaAs / AlGaAs / InGaAs quantum well high power laser. It has been specifically designed for applications in low noise high power Erbium Doped Fibre Amplifiers (EDFA). The extremely stringent reliability requirements are achieved through the Lumics patent innovative technology. This includes careful design, exactly defined manufacturing and extensive testing. The qualification contains a set of optoelectronic, thermal and mechanical tests. Each laser diode module is individually serialised for traceability and is shipped with a specified set of test data. Reliability tests according to Telcordia GR-468-CORE are ongoing at present.
8 9 10 11 12 13 14
Operating Parameters Maximum Maximum Operating Power Operating Current Iop (mA) (2) Product Code Pop (mW)
LU0980M250 LU0980M260 LU0980M270 LU0980M280 LU0980M290 LU0980M300 LU0980M310 LU0980M320 LU0980M330 250 260 270 280 290 300 310 320 330 510 520 530 540 550 560 570 580 590
www.laser2000.co.uk
Characteristics Parameter
Threshold Current Forward Voltage Peak Wavelength Spectral Width (3) (95% Power) Optical Power Stability Spectral Shift With Temp. Side Mode Suppression Monitor Responsivity Monitor Dark Current TEC Current LU0980M250-270 LU0980M280-330 TEC Voltage LU0980M250-270 LU0980M280-330 Thermistor Resistance Thermistor Constant Fibre Type mA V nm nm % nm/C dB A/mW nA A A V V kOhm K
Conditions
at Iop as specified 2nm at Pop, wth FBG at Iop, t = 60sec FBG Temp. at Pop, with FBG chip 25C, case 70C chip 25C, case 70C chip 25C, case 70C chip 25C, case 70C T = 25C HI 1060, Singlemode
Symbol
Ith Vop peak P95 Pop / t /T R ITEC ITEC VTEC VTEC Rth B
Min
972 -20 1 9.5 3850
Typ
45 1.7 980 3 5 0.9 1.2 2.1 2.1 10 3892
Max
56 1.8 985 2 0.5 0.02 20 40 10.5 3900
For more information on Laser 2000 products visit our website at:
Important Notes: (1) kink-free is defined as ldL/dl - <dL/dl>| <0.2, where <dL/dl> is the average slope efficiency below kink. The module is kink free (at least) up to a minimum kink-free power Pk that the module will achieve at a device-specific current, the kink-free current lk. The individual value of lk is noted on the hardcopy of the test report shipped with the device. All values are limited by values listed in Table Absolute Maximum Ratings. (2) Operating current (power) is the maximum current (power) where the slope efficiency does not decrese by more than 20% from average between 20mW and 120% of maximum operating power Pop. The maximum operating power Pop will be achieved at a device-specific current, the maximum operating current Iop. The individual value of Iop is noted on the hardcopy of the test report shipped with the device. All values of Iop are limited by the values listed in the table Absolute Maximum Ratings. The pump laser shall never be operated at apower higher than the maximum operating power Pop throughout its lifetime. At Begin Of Life (BOL), the operating curent shall never be higher than the device-specific maximum operating current Iop that is noted in the test report shipped with the device. At End Of Life (EOL), the operating current shall never be higher than the device-specific kink free current lk that is noted in the test report. (3) lP95 is defined as 95% of total spectral power (4) Please avoid rapid TEC on/off switching
Note: Absolute Maximum Ratings may be applied to the laser module for short periods of time only. Exposure to maximum ratings for extended period of time or exposure above one or more max ratings may cause damage or affect the reliability of the device.
46
Telephone: 01933 461 666 Fax: 01933 461 699 e-mail: sales@laser2000.co.uk website: www.laser2000.co.uk
Laser Diodes
1032nm Laser Module FBG Stabilised
LU1032M150
Wavelength 1032nm High kink-free power Proven reliability for high power operation Cooled 14-pin package Very powerful chip design Singlemode fibre pigtail Fibre Bragg Grating stabilised Pin
The Lumics LU1032M150 laser diode module contains an optimised GaAs substrate based quantum well high power laser. It has been designed for customer specific applications and is available with special FBGs and fires. The extremely stringent reliability requirements are achieved through our patent pending innovative technology. This includes careful design, exactly defined manufacturing and extensive testing. The qualification contains a set of optoelectronic, thermal and mechanical tests. Each laser diode module is individually serialised for traceability and is shipped with a specified set of test data. 1 2 3 4 5 6 7
SM NIR >100mW
Pin Connections
7 6 5 4 3 2 1
8 9 10 11 12 13 14
Function
Cooler (+) Thermistor PD Anode (-) PD Cathode (+) Thermistor NC NC
Pin
8 9 10 11 12 13 14
Function
NC NC LD Anode (+) LD Cathode (-) nc Case Ground Cooler (-)
Ordering Information
LU Lumics xxxx Wavelength to be spec. M Modul 150 Power (POP) xxx Version
- Fibre Type - Termination -FBG
Dimensions (mm)
0.2
6 x 2.54
0.5 min. 13
15.2
12.7
Symbol
Tmax TOP, max TOP, chip IOP IP (Pulse 200ns/Period 30sec) VR, max IF, PD VR, PD ITEC VTEC HI 1060
Min
-40 -20 20 25
Max
85 70 30 260 500 2.0 0.3 5 20 1.8 3.2 500 -
8.9
www.laser2000.co.uk
Characteristics Parameter
Operating Power (1032nm) Kink Free (1) Power Operating Current (2) Threshold Current Forward Voltage Peak Wavelength Spectral Width (FWHM) Optical Power Stability Polarisation: ex Facet From Chip Spectral Shift With Temp Side Mode Suppression Pulsed Operation Peak Power Monitor Responsivity Monitor Dark Current TEC Current TEC Voltage Thermistor Resistance Thermistor B Constant Fibre Specifications Fibre Type Cut-Off Wavelength Core Diameter (MFD) Outer Diameter Numeric Aperture mW mW mA mA V nm nm % dB nm/C dB W W A/mW nA A V kOhm K
Code / Conditions
LU1032M150 at 25C POP = 150mW at IOP at POP, with FBG at IOP, t = 60 sec TEM00 FBG Temp. at POP, with FBG 10kHz, 0.2sec 10kHz, 0.1sec chip 25C, case 70C chip 25C, case 70C T = 25C -
Symbol
POP PK IOP Ith VOP peak POP / t /T R ITEC VTEC Rth B
Min
150 1027 40 -20 1 2 1 9.5 3850
5.40
Typ
1.2*POP 380 1.6 1032 3 5 0.8 2.1 10 3892
Max
400 100 2.0 1037 1 0.5 0.02 20 40 10.5 3900
For more information on Laser 2000 products visit our website at:
(1) Kink-free is defined as ldL/dl - <dL/dl> | <0.2, where <dL/dl> is the average slope efficiency below kink. (2) Operating current (power) is the maximum current (power) where the slope efficiency does not decrease by more than 20% from average between 1.8x - 3.0x threshold to 120% of the maximum rated output power. (3) P95 is defined as 95% of total spectral power
47
Telephone: 01933 461 666 Fax: 01933 461 699 e-mail: sales@laser2000.co.uk website: www.laser2000.co.uk
5.10
Laser Diodes
1064nm Laser Module
LU1064M150
Wavelength 1064nm High kink-free power Proven reliability for high power operation Cooled 14-pin package Very powerful chip design Singlemode fibre pigtail Fibre Bragg Grating stabilised Pin
The Lumics LU1064M150 laser diode module contains an optimised GaAs substrate based quantum well high power laser. It has been designed for customer specific applications and is available with special FBGs and fibres. The extremely stringent reliability requirements are achieved through our patent pending innovative technology. This includes careful design, exactly defined manufacturing and extensive testing. The qualification contains a set of optoelectronic, thermal and mechanical tests. Each laser diode module is individually serialised for traceability and is shipped with a specified set of test data. 1 2 3 4 5 6 7
SM NIR >100mW
Pin Connections
7 6 5 4 3 2 1
8 9 10 11 12 13 14
Function
Cooler (+) Thermistor PD Anode (-) PD Cathode (+) Thermistor NC NC
Pin
8 9 10 11 12 13 14
Function
NC NC LD Anode (+) LD Cathode (-) nc Case Ground Cooler (-)
0.2
6 x 2.54
0.5
Symbol
Tmax TOP, case TOP, chip IOP IP VR, max IF, PD VR, PD ITEC VTEC HI 1060
Min
-40 -20 20 260 -
Max
85 70 30 500 2.0 0.3 5 20 1.8 3.2 500 25
www.laser2000.co.uk
Characteristics Parameter
Operating Power (1064nm) Kink Free (1) Power Operating Current (2) Threshold Current Forward Voltage Peak Wavelength Spectral Width (FWHM) Optical Power Stability Polarisation: ex Facet From Chip Spectral Shift With Temp. Side Mode Suppression Pulsed Operation Peak Power Monitor Responsivity Monitor Dark Current TEC Current TEC Voltage Thermistor Resistance Thermistor B Constant Fibre Specifications Fibre Type mW mW mA mA V nm nm % dB nm/C dB W A/mW nA A V kOhm K
Code / Conditions
LU1064M150 at 25C POP = 150mW at IOP
peak
Symbol
POP PK IOP Ith VOP POP/t /T R ITEC VTEC Rth B
Min
150 1059 40 -20 1 1 9.5 3850
5.40
Typ
1.2* POP 350 1.52 1064 3 5 0.8 2.1 10 3892
Max
390 100 1.65 1069 1 0.5 0.02 20 40 10.5 3900
For more information on Laser 2000 products visit our website at:
at POP, with FBG at IOP, t=60 sec TEM00 FBG Temp. at POP, with FBG 10kHz, 0.2sec chip 25C, case 70C chip 25C, case 70C T = 25C -
(1) Kink-free is defined as ldL/dl - <dL/dl> | <0.2, where <dL/dl> is the average slope efficiency below kink (2) Operating current (power) is the maximum current (power) where the slope efficiency does not decrease by more than 20% from average between 1.8x - 3.0x threshold to 120% of the maximum rated output power (3) P95 is defined as 95% of total spectral power
48
Telephone: 01933 461 666 Fax: 01933 461 699 e-mail: sales@laser2000.co.uk website: www.laser2000.co.uk
5.10
Laser Diodes
SM NIR >100mW
Dimensions (mm)
0.2
6 x 2.54
0.5 min. 13
15.2
12.7
8.9
26.0
30.0 20.83
LU1080M150
Wavelength 1080nm High kink-free power Proven reliability for high power operation Cooled 14-pin package Very powerful chip design Singlemode fibre pigtail Fibre Bragg Grating stabilised
5.40
5.10 7 6 5 4 3 2 1
Function
Cooler (+) Thermistor PD Anode (-) PD Cathode (+) Thermistor NC NC
Pin
8 9 10 11 12 13 14
Function
NC NC LD Anode (+) LD Cathode (-) nc Case Ground Cooler (-)
The Lumics LU1080M150 laser diode module contains an optimised GaAs substrate based quantum well high power laser. It has been designed for customer specific applications and is available with special FBGs and fibres. The extremely stringent reliability requirements are achieved through our patent pending innovative technology. This includes careful design, exactly defined manufacturing and extensive testing. The qualification contains a set of optoelectronic, thermal and mechanical tests. Each laser diode module is individually serialised for traceability and is shipped with a specified set of test data.
8 9 10 11 12 13 14
Symbol
Tmax TOP, case TOP, chip IOP IP (Pulse 200ns/Period 30sec) VR, max IF, PD VR, PD ITEC VTEC HI 1060
Min
-40 -20 20 -
Max
85 70 30 260 500 2.0 0.3 5 20 1.8 3.2 500 25
www.laser2000.co.uk
Ordering Information
LU Lumics xxxx Wavelength to be spec. M Modul 150 Power (POP) xxx Version
- Fibre Type - Termination -FBG
Characteristics Parameter
Operating Power Kink Free (1) Power Operating Current (2) Threshold Current Forward Voltage Peak Wavelength Spectral Width (FWHM) (3) Optical Power Stability Polarisation: ex Facet From Chip Spectral Shift With Temp Side Mode Suppression Pulsed Operation Peak Power Monitor Responsivity Monitor Dark Current TEC Current TEC Voltage Thermistor Resistance Thermistor B Constant Fibre Specifications Fibre Type mW mW mA mA V nm nm % dB dB dB W W A/mW nA A V kOhm K
Code / Conditions
at 25C POP = 150mW at IOP at POP, with FBG at IOP, t = 60 sec TEM00 FBG Temp at POP, with FBG 10kHz, 0.2sec 10kHz, 0.1sec chip 25C, case 70C chip 25C, case 70C T = 25C HI 1060, Singlemode
Symbol
POP PK IOP Ith VOP peak POP/t /T R ITEC VTEC Rth B
Min
150 1078 40 -20 1 2 1 9.5 3850
Typ
1.2*POP 300 1.65 1080 3 5 0.8 2.1 10 3892
Max
350 100 2.0 1082 1 0.5 0.02 20 40 10.5 3900
For more information on Laser 2000 products visit our website at:
(1) Kink-free is defined as ldL/dl - <dL/dl> | <0.2, where <dL/dl> is the average slope efficiency below kink. (2) Operating current (power) is the maximum current (power) where the slope efficiency does not decrease by more than 20% from average between 1.8x - 3.0x threshold to 120% of the maximum rated output power. (3) P95 is defined as 95% of total spectral power
49
Telephone: 01933 461 666 Fax: 01933 461 699 e-mail: sales@laser2000.co.uk website: www.laser2000.co.uk
Laser Diodes
1.5 Output Power (mW)
MM NIR >1000mW
2.5 Voltage 1.0 1.5 0.5 Power 0.0 0.0 0.5 1.0 1.5 2.0 Current (A) 2.5 3.0 0.0 1.0 0.5 2.0 Voltage (V)
Dimensions (mm)
0.5 min. 13
15.2
12.7
8.9
Main Markets: Pumping (Er+, Yb+) Plastics welding Marking Medical laser treatment Illuminations
7.70
www.laser2000.co.uk
5.40
5.10 7 6 5 4 3 2 1
The LU0808M012 series offers an optical power of 1.2W from a 100m N.A. 0.22 fibre. This performance makes them a valuable tool for the highly efficient pumping of high power fibre amplifiers, fibre lasers and solid state lasers. Further important applications are micro material processing with exceptional power densities, illumination and medical lasers.
Function
Cooler (+) Thermistor PD Anode (-) PD Cathode (+) Thermistor NC NC
Pin
8 9 10 11 12 13 14
Function
NC NC LD Anode (+) LD Cathode (-) nc Case Ground Cooler (-)
8 9 10 11 12 13 14
For more information on Laser 2000 products visit our website at:
Electrical and Optical Characteristics (at 808nm, 25C and Begin of Life (BOL)): Parameter Conditions Min Typ Max
CW Output Power (808nm) Peak Wavelength Spectral Width (FWHM) Threshold Current Operating Current Operating Voltage Fibre Core Diameter Fibre Numerical Aperture Fibre Cladding Diameter Connector Type TE-Cooler Current TE-Cooler Voltage Thermistor Type W nm nm A A V m m A V as specified 1.0 800 1.2 808 2 0.4 2 2.2 105 0.22 125 FCPC NTC 813 4 0.6 2.7 2.5 3.3 3.1 -
Symbol
Tmax TOP, max IF, max VR, max IF, PD VR, PD ITEC VTEC -
Min
-40 -20 25
Max
85 70 260 400 0.3 5 20 1.8 3.2 500 -
50
Telephone: 01933 461 666 Fax: 01933 461 699 e-mail: sales@laser2000.co.uk website: www.laser2000.co.uk
Laser Diodes
2.00 1.60 Power (W) 1.20 0.80 0.40 0.00 0 Voltage
MM NIR >1000mW
2.00 1.60 Voltage (V) 1.20 Power 0.80 0.40 0.00
1 Current (A)
Dimensions (mm)
min. 1800
0.5 min. 13
15.2
12.7
8.9
www.laser2000.co.uk
Main Markets: Pumping (Er+, Yb+) Plastics welding Marking Medical laser treatment Illuminations Pin
The LU 0975M017 series offers an optical power of 1.7W from a 100m N.A. 0.22 fibre. This performance makes them a valuable tool for the highly efficient pumping of high power fibre amplifiers, fibre lasers and solid state lasers. Further important applications are micro material processing with exceptional power densities, illumination and medical lasers. 1 2 3 4 5 6 7
5.40
5.10 7 6 5 4 3 2 1
Pin
8 9 10 11 12 13 14
Function
NC NC LD Anode (+) LD Cathode (-) nc Case Ground Cooler (-)
8 9 10 11 12 13 14
For more information on Laser 2000 products visit our website at:
Characteristics Parameter
CW Output Power (975nm) Peak Wavelength Spectral Width (FWHM) Threshold Current Operating Current Operating Voltage Connector Type (Optional) TE-Cooler Current TE-Cooler Voltage Thermistor Type Thermistor Resistance Thermistor Energy Constant Fibre Specifications Type Fibre Core Diameter Fibre Numerical Aperture Fibre Cladding Diameter Fibre Buffer Diameter Min. Bend Radius W nm nm mA A V A V kOhm K m m m m mm
Code / Conditions
as specified T = 25C AFS 105/125 Y Short term / long term
Min
970 25/50
Typ
1.7 975 3 245 3 2 FC/PC NTC 10 3988 105 0.22 125 240 -
Max
985 6 350 3.3 2.2 4 3 -
Min
-40 0 20 -
Max
85 35 25 3.3 0.3 5 20 7 3.6
51
Telephone: 01933 461 666 Fax: 01933 461 699 e-mail: sales@laser2000.co.uk website: www.laser2000.co.uk
Laser Diodes
2.5 output Power (W) 2.0 1.5 1.0 0.5 0.0 0.0 0.5
MM NIR >1000mW
3.5 3.0 2.5 Voltage 2.0 1.5 Power 1.0 0.5 1.0 1.5 0.0 2.0 2.5 3.0 3.5 4.0 4.5 Current (A) Voltage (V)
Dimensions (mm)
min. 1800
0.5 min. 13
Wavelength 975nm Multimode fibre pigtail High coupling efficiency Internal TE-cooler Direct modulation up to 500kHz Compact, hermetically sealed package Available in volume MTTF > 10,000h
15.2
12.7
8.9
Main Markets: Pumping (Er+, Yb+) Plastics welding Marking Medical laser treatment Illuminations
7.70
5.40
5.10 7 6 5 4 3 2 1
Pin Connections
www.laser2000.co.uk
The LU0975M017 series offers an optical power of 2.5W from a 105m core, N.A. 0.22 multimode fibre. This performance makes them a valuable tool for the highly efficient pumping of high power fibre amplifiers, fibre lasers and solid state lasers. Further important applications are micro material processing with exceptional power densities, illumination and medical lasers.
Pin
1 2 3 4 5 6 7
Function
Cooler (+) Thermistor PD Anode (-) PD Cathode (+) Thermistor NC NC
Pin
8 9 10 11 12 13 14
Function
NC NC LD Anode (+) LD Cathode (-) nc Case Ground Cooler (-)
8 9 10 11 12 13 14
For more information on Laser 2000 products visit our website at:
Characteristics Parameter
CW Output Power (975nm) Peak Wavelength Spectral Width (FWHM) Threshold Current Operating Current Operating Voltage Connector Type (Optional) TE-Cooler Current TE-Cooler Voltage Thermistor Type Thermistor Resistance Thermistor Energy Constant Fibre Specifications Type Fibre Core Diameter Fibre Numerical Aperture Fibre Cladding Diameter Fibre Buffer Diameter Min. Bend Radius W nm nm mA A V A V kOhm K m m m mm
Symbol
as specified T = 25C AFS 105/125 Y Short term / long term
Min
2.5 970 25 / 50
Typ
975 4 245 4.3 2.4 FC/PC NTC 10 3988 105 0.22 125 240 -
Max
985 8 350 4.7 2.8 5 3.2 -
Symbol
Tmax TOP, case TOP, chip IOP VR, max IF, PD VR, PD ITEC VTEC
Min
-40 0 20 -
Max
85 35 25 4.7 0.3 5 20 7 3.6
52
Telephone: 01933 461 666 Fax: 01933 461 699 e-mail: sales@laser2000.co.uk website: www.laser2000.co.uk
Laser Diodes
MM NIR >1000mW
Dimensions (mm)
min. 1800
0.2
6 x 2.54
0.5 min. 13
15.2
12.7
8.9
Up to 4W Operation Power Wavelength 975nm Multimode fibre pigtail High coupling efficiency Internal TE-cooler Direct modulation up to 500kHz Compact, hermetically sealed package Available in volume MTTF > 10,000h
5.40
5.10 7 6 5 4 3 2 1
Function
Cooler (+) Thermistor PD Anode (-) PD Cathode (+) Thermistor NC NC
Pin
8 9 10 11 12 13 14
Function
NC NC LD Anode (+) LD Cathode (-) NC Case Ground Cooler (-)
Main markets: Pumping (Er+, Yb+) Plastics welding Marking Medical laser treatment Illuminations
8 9 10 11 12 13 14
www.laser2000.co.uk
The LU0975M040 series offers an optical power of 4W from a 105m core, N.A. 0.22 multimode fibre. This performance makes them a valuable tool for the highly efficient pumping of high power fibre amplifiers, fibre lasers and solid state lasers. Further important applications are micro material processing with exceptional power densities, illumination and medical lasers.
Electrical And Optical Characteristics (At 975nm, 25C and Begin Of LIfe (BOL)) Parameter Conditions Min Typ
CW Output Power (975nm) Peak Wavelength Spectral Width (FWHM) Threshold Current Operating Current Operating Voltage Connector Type (Optional) TE-Cooler Current TE-Cooler Voltage Thermistor Type Thermistor Resistance Thermistor Energy Constant Heat Resistance LD to BTF Base Plate Fibre Specifications Type Fibre Core Diameter Fibre Numerical Aperture Fibre Cladding Diameter Fibre Buffer Diameter Min. Bend Radius W nm nm mA A V A V kOhm K K/W as specified T = 25C RH AFS 105/125 Y Short term / long term 4.0 970 975 4 245 6.5 3.2 6.5 3.0 1.5 NTC 10 3988 3.6
Max
985 8 400 7.0 3.5 7.0 3.5 2.0 -
For more information on Laser 2000 products visit our website at:
m m m mm
25 / 50
53
Telephone: 01933 461 666 Fax: 01933 461 699 e-mail: sales@laser2000.co.uk website: www.laser2000.co.uk
200 Series
300 Series
200 Series
Display Selection Switches Laser Diode On / Off Switch Drive Current Monitor Output (BNC) Local / IEEE Control Selection Switch On / Off Key Switch External Photodiode Input Modulation Input (BNC)
300 Series
Display Selection Switches Constant Current, Range and Constant Power Selection Switch Laser Diode On / Off Button Laser Diode and Photodiode Polarity Selection Switch Photodiode Bias Selection Switch GPIB Interface (Optional) Temperature Window Control Input Pre - Set Configuration Selection GPIB Address Selection IEC Mains Input Connector
Output Power / Drive Current Adjustment Constant Current Mode Selection Switch
www.laser2000.co.uk
Constant Power Selection Switch 9 Pin D Sub Connector to Laser Diode IEC Mains Input Connector
For more information on Laser 2000 products visit our website at:
LDC201
Laser Diode Drive Specifications Drive Current (max) Compliance Voltage (max) Transients Noise (10Hz - 10MHz, RMS) Setting Resolution Measurement Accuracy Thermo-Electric Drive Specifications TEC Drive Current (max) TEC Compliance Voltage (max) Noise (10Hz - 10MHz, RMS) Setting Resolution (with IC sensor) Measurement Accuracy (with IC sensor) Temperature Stability (with IC sensor) A V mA A A mA A V mA C C C 0.1 >2.5 <0.05 <0.2 10 <0.05 -
LDC220
2 >4 <2 <15 100 <2 -
Temperature (TEC) Control 200 Series 300 Series TED 200 TED 350
2 >6 <1 0.01 0.1 <0.001 5 >8 <2 0.01 0.1 <0.001
54
Telephone: 01933 461 666 Fax: 01933 461 699 e-mail: sales@laser2000.co.uk website: www.laser2000.co.uk
500 Series
8000 Series
500 Series
Display Selection Switch Temperature Transducer Selection On / Off Key Switch Local / GPIB Selection Switch Constant Current / Constant Power Selection Output Power / Drive Current Adjustment Polarity Configuration Temperature Control Adjustment Mains Voltage Range Selection IEC Mains Connector Temperature Window Control Output Return to Previous Menu Module Bay
www.laser2000.co.uk
PID Loop Control GPIB Interface 9 Pin D Sub Connector to Laser Diode Pre - Set Configuration Selection 15 Pin D Sub Connector to Thermo - Electric Controller GPIB Address Selection
For more information on Laser 2000 products visit our website at:
Mainframes
PRO 8000 Mainframe PRO 800 Mainframe 8 Channel Mainframe 2 Channel Mainframe
Modules
Laser Diode Drive Current Modules LDC 8001 LDC 8002 LDC 8005 LDC 8010 LDC 8040 LDC 8080 TEC Current Control Modules TED 8020-16 TED 8040-16 TED 8080-16
55
Telephone: 01933 461 666 Fax: 01933 461 699 e-mail: sales@laser2000.co.uk website: www.laser2000.co.uk
LDH Series
Laser Driver
Laser Mount
LDH CD TC B
CAB 420
TED 200
www.laser2000.co.uk
LDH HHL
Separate Current + Temperature Controllers CAB 400 CAB 420-15
TED 350
For more information on Laser 2000 products visit our website at:
LDH DIL
LDH BFY
56
Telephone: 01933 461 666 Fax: 01933 461 699 e-mail: sales@laser2000.co.uk website: www.laser2000.co.uk
CW Diode Driver
2800 Series
The model 2800 power supply unit is a microprocessor controlled autoranging unit configured for use with 240VAC single phase mains voltages. It is suitable for driving CW laser diodes from 0-40A at 300VDC and is specifically designed for use with laser diode bar arrays. The 2800 is an integrated power supply with control electronics to deliver safe and comprehensive control of the output power from high power laser diode systems. The output current is carefully conditioned to prevent damage to the laser diodes that would otherwise occur with lesser products. Both manual and remote control is possible either via the front panel controls or via and RS232/485 interface. The unit combines complete control of the laser diodes in the pump head and is interlocked for safe operation. In addition, the unit also monitors and protects the laser head from faults caused by diode array temperature, over current, over voltage and coolant flow. It also integrates control of the Q-switch pulse source and the Q-switch RF driver for further ease of use. Pulse synchronisation is also possible using the Q-switch pulse output and external Q-switch trigger inputs. RF Frequency Switch Laser Fault Indicator LEDs: Coolant Interlock Remote Interlock Array Overtemp Driver Overtemp Driver Over Voltage Driver Over Current RF Driver Fault Frequency Control
www.laser2000.co.uk
Start Button
Current Adjust
Laser Fault Indicator LEDs: Coolant Interlock Remote Interlock Array Overtemp Driver Overtemp Driver Over Voltage Driver Over Current RF Driver Fault
For more information on Laser 2000 products visit our website at:
Remote Interlock
Mains Input
Communications Port
SHG Temperature
SHG Temperature
Dimensions in mm
2900
0-200 Amps 300 VDC max 1-2000 Hz 50 sec-5 msec Air
2800
0-40 Amps 300 VDC max 1 kHz-50 kHz Air
Output Current Diode Bias Voltage Pulse Repetition Rate Pulse Duration Cooling
57
Telephone: 01933 461 666 Fax: 01933 461 699 e-mail: sales@laser2000.co.uk website: www.laser2000.co.uk
LDD Series
For advice on selecting laser diode drivers and mounts, please contact Laser 2000.
Product Code
LDD-50 LDD-150 LDD-250 LDD-400 LDD-600 LDD-1000 LDD-1500 RS232-LDD LDQCW-250 LDQCW-1000
Description
Laser Laser Laser Laser Laser Laser Laser Laser Laser Laser diode diode diode diode diode diode diode diode diode diode driver, driver, driver, driver, driver, driver, driver, driver, driver, driver, CW, 50W rating CW, 150W rating CW, 250W rating CW, 400W rating CW, 600W rating CW, 1000W rating CW, 1500W rating RS232 option QCW, 250W rating QCW, 1000W rating
Parameter
I Pulse (max) I Ave. (max) V out (max) Pulse width Max Rep Rate Rise/Fall Time Current Regulation Current Ripple Current Overshoot Operating Temp Storage Temp Humidity Cooling
* Adjustable
LDDCW
A A V sec kHz sec % of max % of max % of max C
LDDQCW
CW Supplies
Model
LDD-250-XX LDD-400-XX* LDD-600-XX LDD-1000-XX LDD-1500-XX* Auxiliary Outputs:
Poutmax
Output Current
Input Voltage
Size (L x W x H)
190 x 147 x 63.5 mm 251 x 183 x 63.5 mm 251 x 183 x 63.5 mm
For more information on Laser 2000 products visit our website at:
250W 10A to 60A 90-264VAC 400W Outputs available** 180-264VAC 600W 10A to 80A 90-264VAC 1000W Outputs available** 90-264VAC 1500W 180-264VAC +5V @1A +15V @1A -15V @0.5A * LDD-400 and LDD-1500 input voltage: 180-264VAC ** Maximum compliance voltage determined by maximum rated power Other outputs available upon request
150 (Peak) 75 40 5msec to CW 50sec to CW 1 5 500 - 5000* 25 0.1 <0.5 <0.5 <0.5 <1 <5 0 to 40 -20 to 85 0 - 90% Forced Air
www.laser2000.co.uk
PoutAvg
(see note 1)
Output Current
(see note 2)
Input Voltage
Size (L x W x H)
3 4 5 6 7 8 9 10,11 12 13,14 15
LDDQCW-250-XX 250W 150Amax 90-264VAC 190 x 147 x 120 mm LDDQCW-600-XX 600W 150Amax 90-264VAC 251 x 183 x 121 mm LDDQCW-1000-XX 1000W 150Amax 180-264VAC 251 x 183 x 120 mm Note 1: Average Power must not exceed LDQCW ratings Note 2: Output Current and voltage compliance can be configured for individual requirements Auxiliary Outputs: +5V @1A +15V @1A -15V @0.5A Other power levels available upon request
GND Vout Monitor: 10V = Vmax out Iout Monitor: 10V = Imax out Iprogram(+): 10V = Imax out N/C GND +5V @1.0A -15V @0.5A +15V @1.0A GND
58
Telephone: 01933 461 666 Fax: 01933 461 699 e-mail: sales@laser2000.co.uk website: www.laser2000.co.uk