Professional Documents
Culture Documents
com
Code No: 05410501 Set No. 1 JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY HYDERABAD IV B.Tech. II Sem., I Mid-Term Examinations, March 2010 EMBEDDED SYSTEMS Objective Exam Name: ______________________________ Hall Ticket No. A I 1. Choose the correct alternative:
Answer All Questions. All Questions Carry Equal Marks.Time: 20 Min. Marks: 20.
The information from the customer will collected in ______ phase of Embedded System Design process [ ] (A)Specification (B)Requirements (C)Architecture (D)Components Which of the following is/are the characteristic(s) of Embedded Computing applications [ (A)Real Time (B)Multi Rate (C)Power (D)All of the above The 8051 micro controller has ______ number of ports (A)2 (B)3 (C)4 ]
2.
3.
(D)5
4.
When the 8051 is reset, the default SP register value is _________ (A)00h (B)07h (C)08h (D)09h Counter actions will be controlled using ________ (A)TMOD (B)TCON (C) both A AND B __________ flag is affected by every instruction executed (A)P (B)C (C)AC No math flags are affected by ______ instruction (A)ADD (B)SUB (C)INC
5.
6.
7.
8.
______ instruction is used to call the subroutine located anywhere in the program memory space [ ] (A)CALL (B)ACALL (C)LCALL (D)all the above ______ is used at the end of the subroutine called by an interrupt (A)RETI (B)RET (C)END _______ register does not have any internal address. (A)PDTR (B)PC (C)A Fill in the Blanks
9.
T N
W U
R O
D L
(D)none (D)OV (D)MUL
[ (D)RETURN [ (D)B
10.
II
The address of Register3 in Bank 1 is ________ ______ pulse is used to read ROM _______ mnemonic is used to move data from external RAM Cont2 www.jntuworld.com
www.jntuworld.com
-2-
Set No. 1
External interrupt 1 is received on _______ pin A=10100101, CF=1 after execution of instruction RRC A the values of A=_______, F=________ c=1, b=0, after execution of instruction ORL c,/b the values in c=______ b=______ The carry flag is always set to _____ value after execution of MUL instruction. ______ opcode is used to adjust the result of BCD addition to decimal. After MUL A B instruction execution, the OV will be set if _______ SWAP instruction exchanges the nibbles of ______ register.
T N
W U
-oOo-
R O
D L
www.jntuworld.com
www.jntuworld.com
Set No. 2
JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY HYDERABAD IV B.Tech. II Sem., I Mid-Term Examinations, March 2010 EMBEDDED SYSTEMS Objective Exam Name: ______________________________ Hall Ticket No. A I Choose the correct alternative:
Answer All Questions. All Questions Carry Equal Marks.Time: 20 Min. Marks: 20.
1.
When the 8051 is reset, the default SP register value is _________ (A)00h (B)07h (C)08h (D)09h Counter actions will be controlled using ________ (A)TMOD (B)TCON (C) both A AND B __________ flag is affected by every instruction executed (A)P (B)C (C)AC No math flags are affected by ______ instruction (A)ADD (B)SUB (C)INC
2.
3.
4.
5.
______ instruction is used to call the subroutine located anywhere in the program memory space [ ] (A)CALL (B)ACALL (C)LCALL (D)all the above ______ is used at the end of the subroutine called by an interrupt (A)RETI (B)RET (C)END _______ register does not have any internal address. (A)PDTR (B)PC (C)A
6.
7.
8.
The information from the customer will collected in ______ phase of Embedded System Design process [ ] (A)Specification (B)Requirements (C)Architecture (D)Components Which of the following is/are the characteristic(s) of Embedded Computing applications [ (A)Real Time (B)Multi Rate (C)Power (D)All of the above The 8051 micro controller has ______ number of ports (A)2 (B)3 (C)4 Fill in the Blanks External interrupt 1 is received on _______ pin A=10100101, CF=1 after execution of instruction RRC A the values of A=_______, F=________ Cont.2 [ (D)5 ]
T N
W U
R O
D L
(D)OV (D)MUL
(D)none
[ (D)RETURN [ (D)B
9.
10.
II 11. 12.
www.jntuworld.com
www.jntuworld.com
:2:
Set No. 2
c=1, b=0, after execution of instruction ORL c,/b the values in c=______ b=______ The carry flag is always set to _____ value after execution of MUL instruction. ______ opcode is used to adjust the result of BCD addition to decimal. After MUL A B instruction execution, the OV will be set if _______ SWAP instruction exchanges the nibbles of ______ register. The address of Register3 in Bank 1 is ________ ______ pulse is used to read ROM _______ mnemonic is used to move data from external RAM
T N
W U
-oOo-
R O
D L
www.jntuworld.com
www.jntuworld.com
Code No: 05410501 Set No. 3 JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY HYDERABAD IV B.Tech. II Sem., I Mid-Term Examinations, March 2010 EMBEDDED SYSTEMS Objective Exam Name: ______________________________ Hall Ticket No. A I 1. Choose the correct alternative: __________ flag is affected by every instruction executed (A)P (B)C (C)AC No math flags are affected by ______ instruction (A)ADD (B)SUB (C)INC [ (D)OV [ (D)MUL
Answer All Questions. All Questions Carry Equal Marks.Time: 20 Min. Marks: 20.
2.
3.
______ instruction is used to call the subroutine located anywhere in the program memory space [ ] (A)CALL (B)ACALL (C)LCALL (D)all the above ______ is used at the end of the subroutine called by an interrupt (A)RETI (B)RET (C)END _______ register does not have any internal address. (A)PDTR (B)PC (C)A
4.
5.
6.
The information from the customer will collected in ______ phase of Embedded System Design process [ ] (A)Specification (B)Requirements (C)Architecture (D)Components Which of the following is/are the characteristic(s) of Embedded Computing applications [ (A)Real Time (B)Multi Rate (C)Power (D)All of the above The 8051 micro controller has ______ number of ports (A)2 (B)3 (C)4
7.
8.
T N
W U
R O
(D)RETURN
D L
(D)B
[ (D)5 [
9.
When the 8051 is reset, the default SP register value is _________ (A)00h (B)07h (C)08h (D)09h Counter actions will be controlled using ________ (A)TMOD (B)TCON (C) both A AND B Fill in the Blanks
10.
[ (D)none
II
c=1, b=0, after execution of instruction ORL c,/b the values in c=______ b=______ The carry flag is always set to _____ value after execution of MUL instruction. ______ opcode is used to adjust the result of BCD addition to decimal. Cont.2 www.jntuworld.com
www.jntuworld.com
:2:
Set No. 3
After MUL A B instruction execution, the OV will be set if _______ SWAP instruction exchanges the nibbles of ______ register. The address of Register3 in Bank 1 is ________ ______ pulse is used to read ROM _______ mnemonic is used to move data from external RAM External interrupt 1 is received on _______ pin A=10100101, CF=1 after execution of instruction RRC A the values of A=_______, F=________
-oOo-
T N
W U
R O
D L
www.jntuworld.com
www.jntuworld.com
Code No: 05410501 Set No. 4 JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY HYDERABAD IV B.Tech. II Sem., I Mid-Term Examinations, March 2010 EMBEDDED SYSTEMS Objective Exam Name: ______________________________ Hall Ticket No. A I 1. Choose the correct alternative:
Answer All Questions. All Questions Carry Equal Marks.Time: 20 Min. Marks: 20.
______ instruction is used to call the subroutine located anywhere in the program memory space [ ] (A)CALL (B)ACALL (C)LCALL (D)all the above ______ is used at the end of the subroutine called by an interrupt (A)RETI (B)RET (C)END _______ register does not have any internal address. (A)PDTR (B)PC (C)A [ (D)RETURN ]
2.
3.
(D)B
4.
The information from the customer will collected in ______ phase of Embedded System Design process [ ] (A)Specification (B)Requirements (C)Architecture (D)Components Which of the following is/are the characteristic(s) of Embedded Computing applications [ (A)Real Time (B)Multi Rate (C)Power (D)All of the above The 8051 micro controller has ______ number of ports (A)2 (B)3 (C)4
5.
6.
7.
When the 8051 is reset, the default SP register value is _________ (A)00h (B)07h (C)08h (D)09h Counter actions will be controlled using ________ (A)TMOD (B)TCON (C) both A AND B __________ flag is affected by every instruction executed (A)P (B)C (C)AC No math flags are affected by ______ instruction (A)ADD (B)SUB (C)INC Fill in the blanks ______ opcode is used to adjust the result of BCD addition to decimal. After MUL A B instruction execution, the OV will be set if _______ SWAP instruction exchanges the nibbles of ______ register.
8.
T N
W U
R O
D L
(D)none
[ (D)5 [
9.
[ (D)OV [ (D)MUL
10.
Cont.2 www.jntuworld.com
www.jntuworld.com
:2:
Set No. 4
The address of Register3 in Bank 1 is ________ ______ pulse is used to read ROM _______ mnemonic is used to move data from external RAM External interrupt 1 is received on _______ pin A=10100101, CF=1 after execution of instruction RRC A the values of A=_______, F=________ c=1, b=0, after execution of instruction ORL c,/b the values in c=______ b=______ The carry flag is always set to _____ value after execution of MUL instruction.
-oOo-
T N
W U
R O
D L
www.jntuworld.com