Professional Documents
Culture Documents
About Lancer
Lancer designs, engineers and manufactures an elite line of weapons and accessories to provide todays military, law enforcement and recreational shooters with the most effective weapons on the market. What sets Lancers gear apart? We continue to nd ways to reduce weight, increase strength and maintain safety. Whats the bottom line? Optimum Performance. Our product line includes L15 Lower Receivers, L5 Advanced Warghter Magazines (AWMs), Carbon-Fiber Handguards, L15 Modern Sporting Ries and Shotgun Shell Extension Tubes. All Lancer products are made in the U.S.A. Were continuing to set the standard for small arms technologies and answering the needs of todays top shooters throughout the country and across the globe.
Table of Contents
L5 Advanced Warghter Magazines ...........................................3 30-Round .............................................................................5 20-Round .............................................................................7 5 & 10-Round .............................................................................9 Carbon Fiber Handguards ...........................................................11 5.56mm AR .............................................................................13 .308 cal AR .............................................................................15 Shotgun Extension Tubes ..........................................................17 L15 Receivers .............................................................................21 L15 Modern Sporting Ries ........................................................25 Accessories.... ............................................................................29 Magazines & L15 for Restricted States .......................................30
Increases Op-Tempo - Pre-combat inspections and checks - Post contact checks - Speeds ammunition consolidation Tactical Magazine Changes - The aggressive body texture improves gripping - Drops free from lower receivers - The magazine is designed to resist damage from rough handling, dropping and abuse Vehicle Storage - The L5 AWM can be stored loaded in unconditioned environments; from +180 F to -50 F
SPECIFICATION
Caliber: 5.56X45mm NATO / .223 rem Weapon Systems: M4/M16/AR15, HK416, ARX160, SCAR16, SIG556, Others Capacity: 30 Rounds Weight (unloaded): 4.4oz
30-Round Magazines
PART NUMBER
999-000-2320-01 999-000-2320-13* 999-000-2320-11* 999-000-2320-03 999-000-2320-05 999-000-2320-07 999-000-2320-09
DESCRIPTION
L5 AWM, 30 round, Translucent Body, Smoke L5 AWM, 30 round, Translucent Body, Brown L5 AWM, 30 round, Translucent Body, Black L5 AWM, 30 round, Opaque Body, Black L5 AWM, 30 round, Opaque Body, Olive Drab L5 AWM, 30 Round, Opaque Body, Flat Dark Earth L5 AWM, 30 Round, Opaque Body, Foliage Green
* Translucent Brown and Black are special order and have limited availability
SPECIFICATION
Caliber: 5.56X45mm NATO / .223 rem Weapon Systems: M4/M16/AR15, HK416, ARX160, SCAR16, SIG556, Others Capacity: 20 Rounds Weight (unloaded): 3.5oz
20-Round Magazines
PART NUMBER
999-000-2320-02 999-000-2320-14* 999-000-2320-12* 999-000-2320-04 999-000-2320-06 999-000-2320-08 999-000-2320-10
DESCRIPTION
L5 AWM, 20 round, Translucent Body, Smoke L5 AWM, 20 round, Translucent Body, Brown L5 AWM, 20 round, Translucent Body, Black L5 AWM, 20 round, Opaque Body, Black L5 AWM, 20 round, Opaque Body, Olive Drab L5 AWM, 20 Round, Opaque Body, Flat Dark Earth L5 AWM, 20 Round, Opaque Body, Foliage Green
*Translucent Brown and Black are special order and have limited availability
SPECIFICATION
Caliber: 5.56X45mm NATO / .223 rem Weapon Systems: M4/M16/AR15, HK416, ARX160, SCAR16, SIG556, Others Capacity: 5 or 10 Rounds
PART NUMBER
999-000-2320-21 999-000-2320-22 999-000-2320-23 999-000-2820-02 999-000-2820-03 999-000-2820-04
DESCRIPTION
L5 AWM, 10 round, Translucent Body, Smoke L5 AWM, 10 round, Translucent Body, Clear L5 AWM, 10 round, Opaque Body, Black L5 AWM, 5 round, Translucent Body, Clear L5 AWM, 5 round, Translucent Body, Smoke L5 AWM, 5 round, Opaque Body, Black
10
The Lancer Lightweight Carbon-Fiber Handguard (LCH) is a custom proled free oat handguard system designed for 5.56mm and .308cal AR type ries. Applying our experience in carbon-ber product design and lightweight component development weve created a robust free oat handguard that weighs less than comparable aluminum handguard systems without sacricing rigidity or impact strength. Available in carbine, mid-length, rie length, rie length plus, and extra-long (15"), the Lancer Lightweight Carbon-Fiber Handguard can be applied to a variety of rie congurations and used in many different applications.
Advanced Design
Carbon-Fiber Handguard Tube Weve selected a carbon ber layup / resin combination that will resist the heat associated with high volumes of small arms re, and is rigid enough for heavy use. Cooling slots have been provided to manage barrel temperature. 7075-T6 Aluminum Components Where necessary aircraft grade 7075-T6 aluminum has been used to ensure the durability and reliability of the handguard assembly, such as the upper receiver extension and the end cap. The carbon-ber tube is precision t to the upper receiver extension and secured with fasteners to ensure a rigid connection.
11
12
13
DESCRIPTION
Carbine Length, Cooling Slots Midlength Length, Cooling Slots Rie Length, Cooling Slots Rie Length Plus, Cooling Slots Extra-Long, Cooling Slots Extra-Long Varmint, No Cooling Slots Carbine Length, Cooling Slots Midlength Length, Cooling Slots Rie Length, Cooling Slots Rie Length Plus, Cooling Slots Extra-Long, Cooling Slots Carbine Length, Cooling Slots Midlength Length, Cooling Slots Rie Length, Cooling Slots Rie Length Plus, Cooling Slots Extra-Long, Cooling Slots
INSIDE/OUTSIDE DIMENSIONS
1.8" / 2.0" 1.8" / 2.0" 1.8" / 2.0" 1.8" / 2.0" 1.8" / 2.0" 1.8" / 2.0" 1.8" / 2.0" 1.8" / 2.0" 1.8" / 2.0" 1.8" / 2.0" 1.8" / 2.0" 1.8" / 2.0" 1.8" / 2.0" 1.8" / 2.0" 1.8" / 2.0" 1.8" / 2.0"
LENGTH
7.2" 9.5" 12.5" 14.6" 16.25" 16.25" 7.2" 9.5" 12.5" 14.6" 16.25" 7.2" 9.5" 14.6" 12.5" 16.25"
WEIGHT
9.2 oz 10.0 oz 11.0 oz 11.6 oz 12.1 oz 13.5 oz 9.6 oz 10.4 oz 11.4 oz 12.0 oz 12.5 oz 10.5 oz 11.7 oz 13.3 oz 13.5 oz 14.1 oz
SIGHT RAIL
No No No No No No 2" Sight Rail 2" Sight Rail 2" Sight Rail 2" Sight Rail 2" Sight Rail Full Length Full Length Full Length Full Length Full Length
LENGTH
14
15
DESCRIPTION
Carbine Length, Cooling Slots, 16 TPI Midlength Length, Cooling Slots, 16 TPI Rie Length, Cooling Slots, 16 TPI Rie Length Plus, Cooling Slots, 16 TPI Extra-Long, Cooling Slots, 16 TPI
INSIDE/OUTSIDE DIMENSIONS
2.0" / 2.2" 2.0" / 2.2" 2.0" / 2.2" 2.0" / 2.2" 2.0" / 2.2"
LENGTH
7.2" 9.5" 12.5" 14.6" 16.25"
WEIGHT
11.5 oz 12.1 oz 13.3 oz 14.1 oz 14.6 oz
SIGHT RAIL
No No No No No
DESCRIPTION
Carbine Length, Cooling Slots, 18 TPI Midlength Length, Cooling Slots, 18 TPI Rie Length, Cooling Slots, 18 TPI Rie Length Plus, Cooling Slots, 18 TPI Extra-Long, Cooling Slots, 18 TPI
INSIDE/OUTSIDE DIMENSIONS
2.0" / 2.2" 2.0" / 2.2" 2.0" / 2.2" 2.0" / 2.2" 2.0" / 2.2"
LENGTH
7.2" 9.5" 12.5" 14.6" 16.25"
WEIGHT
11.5 oz 12.1 oz 13.3 oz 14.1 oz 14.6 oz
SIGHT RAIL
No No No No No
LENGTH
16
17
The new Lancer Extension Tubes replace the cap of your existing shotgun to extend the capacity of the shotgun. They feature a light-weight, carbon-ber tube with a bonded nut and end cap and a carbon-ber barrel clamp. Made in 12-guage for the following: Benelli M1/M2, Remington 870/1100/1187, and Remington Versa Max. Lengths include plus two through plus nine. The LSX is designed to attach to existing shotgun magazine tubes to provide added capacity to the shotgun. Weve combined precision machined aluminum components with an advanced carbon-ber tube to yield a lightweight, durable extension to your shotgun.
SELECTING THE LSX There are two basic methods of selecting your LSX: total length and total capacity. Total Length If you want to increase the capacity of your shotgun but dont want the extension tube to extend beyond past the muzzle, measure from the front of the shotguns handguard to the end of the muzzle. This will give you the maximum length of the extension tube. Use the table to select the appropriate part number. Total Capacity The table provided has the optimal capacity, though capacity could vary due to nal spring length. LSX is currently available for specic model Benelli and Remington Shotguns, more brands and models will be added, check www.lancer-systems.com for the most up to date availability.
SHOTGUN EXTENSION CLAMP Made from high strength anodized aluminum. High temperature silicone foam gripping pads are provided to ensure the clamp stays in place. Available with or without Picatinny rail. The rail can be used for accessories or mounting a sling attachment. Designed for the LSX carbon-ber tube. Extension clamps are recommended for extension tubes that extend beyond the end of the barrel. They are also recommended for Remington applications due to the shallow threading on the Remington magazine tubes.
18
APPLICATION
Super 90, M1, M2 Super 90, M1, M2 Super 90, M1, M2 Super 90, M1, M2 Super 90, M1, M2 Super 90, M1, M2 Super 90, M1, M2
ADDED CAPACITY
Plus 2 Plus 3 Plus 4 Plus 5 Plus 6 Plus 7 Plus 8
LENGTH
6.4 9.5 10.6 12.8 14.8 18.0 20.6
WEIGHT
2.1 oz 2.2 oz 2.3 oz 2.5 oz 2.7 oz 2.9 oz 3.1 oz
REMINGTON
PART NUMBER
LSX-2X-R LSX-3X-R LSX-4X-R LSX-5X-R LSX-6X-R LSX-7X-R LSX-8X-R
APPLICATION
870, 1100, 11-87, VersaMax 870, 1100, 11-87, VersaMax 870, 1100, 11-87, VersaMax 870, 1100, 11-87, VersaMax 870, 1100, 11-87, VersaMax 870, 1100, 11-87, VersaMax 870, 1100, 11-87, VersaMax
ADDED CAPACITY
Plus 2 Plus 3 Plus 4 Plus 5 Plus 6 Plus 7 Plus 8
LENGTH
6.4 9.5 10.6 12.8 14.8 18.0 20.6
WEIGHT
2.4 oz 2.5 oz 2.7 oz 2.8 oz 3.0 oz 3.1 oz 3.3 oz
LENGTH
19
DESCRIPTION
Shotgun Extension Clamp, No Picatinny Rails Shotgun Extension Clamp, Picatinny Rail One Side Shotgun Extension Clamp, Picatinny Rail Both Sides
20
STANDARD MAGWELL
L15 Receivers
The L15s changeable magazine well extensions (Magwells) make it one of most versatile AR receivers available today. With three Magwell congurations to choose from, the L15 lower can be rapidly customized for a specic mission, trip to the range or 3-gun match. The Tactical and Competition Magwells have a large, smooth funnel-like internal surface to facilitate rapid magazine changes. The Standard Magwell emulates the size of a typical AR lower and also has a large beveled opening. The Magwell is attached to the lower via a captured rail and locks into place with a standard front takedown pin (patented). The use of the takedown pin allows the Magwell to be removed without the use of special tools. The Magwells are precision machined from aluminum billet to match the features in the lower, ensuring rattle-free operation. The lower also features an ambidextrous bolt release system and an oversized magazine release button. The L15 is available either stripped or assembled. The stripped L15 receivers are supplied with a choice of magazine well extensions, an oversized magazine release button, ambidextrous bolt release lever, ambidextrous bolt release buffer and associated roll pins. The parts are supplied unassembled with instructions. The Lancer supplied hardware will work with other lower parts kits. The assembled L15 receivers are supplied with all hardware installed, including an Ergo Grip, Ergo F93 PRO or EFX-A2 stock and choice of magazine well extensions and trigger option. Trigger options include a standard commercial grade trigger or premium CMC curved trigger.
TACTICAL MAGWELL
COMPETITION MAGWELL
21
22
L15 Receivers
23
MAGWELL OPTIONS
STD X X X TACT COMP
DESCRIPTION L15 Stripped Lower with no Magwell L15 Stripped Lower with Standard Magwell L15 Stripped Lower with Tactical Magwell L15 Stripped Lower with Competition Magwelll
MAGWELL OPTIONS
STD TACT COMP
X X X X X X X X X
DESCRIPTION
L15, Assembled, F93 Adjustable Stock, Std Trigger with Standard Magwell L15, Assembled, F93 Adjustable Stock, Std Trigger with Tactical Magwell L15, Assembled, F93 Adjustable Stock, Std Trigger with Competition Magwell L15, Assembled, Fixed Stock, Premium Trigger with Standard Magwell L15, Assembled, Fixed Stock, Premium Trigger with Tactical Magwell L15, Assembled, Fixed Stock, Premium Trigger with Competition Magwell L15, Assembled, F93 Adjustable Stock, Premium Trigger with Std Magwell L15, Assembled, F93 Adjustable Stock, Premium Trigger with Tact Magwell L15, Assembled, F93 Adjustable Stock, Premium Trigger with Comp Magwell
24
25
L15 SPORTER
The L15 Sporter is a lightweight, versatile modern sporting rie designed for a variety of uses. The high quality Daniel Defense 16" lightweight chrome lined barrel has a midlength gas system and offers superior accuracy and reliability. An Ergo F93 stock and Ergo grip provide balance and control to the rie. The carbon ber handguard has a 2" sight rail for back up iron sights and the cooling slots will accept accessory rails for customized versatility without adding unnecessary weight.
L15 COMPETITION
The L15 Competition was designed for action shooting. Taking lessons learned from the Lancer Action Shooting Team weve assembled a compact, lightweight, fast shooting rie. The mid-weight 18" barrel combines compactness with precision offering 1 MOA accuracy. The L15 Competition is all about balance and speed. The L15 lower with competition magwell allows for faster re-loads, the extra-long, free oating handguard enables a better forward grip and faster transition between targets. The rie length gas system, Wheaton Compensator provide soft recoil and minimal muzzle climb, while the short, positive reset of the CMC trigger allows for faster, more accurate follow up shots.
26
L15 SPORTER
Caliber 5.56mmX45 / .223rem Barrel 16" Lightweight CHF Chrome lined Twist 1:7 Chamber 5.56mmX45 NATO Gas system Mid Length Flash Hider A2 Flash Hider Handguard Lancer Carbon Fiber with 2" sight rail Lower Receiver Lancer L15 with Tactical Magwell Trigger Milspec Stock F93 Pro stock with heavy buffer Grip Ergo Grip Weight 7.2lbs
L15 COMPETITION
Caliber 5.56mmX45 / .223rem Barrel SS 18" Mid-weight prole Twist 1:8 Chamber 5.56mmX45 NATO Gas system Rie Length Compensator Wheaton Arms SS Compensator Handguard Lancer Carbon Fiber Extra-Long Lower Receiver Lancer L15 with Competition Magwell Trigger CMC 3-1/2lb Trigger Stock EFX-A2 Fixed Stock Grip Ergo Grip Weight 7.7lbs
27
28
Accessories
MAGAZINE COUPLER The Lancer Magazine Coupler was developed for the L5, L5A and L5 AWM Translucent Magazines. The Coupler was designed to match the unique contours of the polymer body and align with the molded ribs ensuring the magazines are aligned and held securely without obscuring the view of the rounds. The Lancer Magazine Cinch can also be used with USGI Aluminum and Steel Magazines. PART NUMBER 999-000-1350 DESCRIPTION Magazine Coupler for L5AWM, L5, L5A and USGI Magazines
L5AWM REPLACEMENT FLOOR PLATES Replacement oor kits include 3 oor plates of the same color and are available with or without water drain holes. The oor plates with water drain hole are designed for waterborne opera on allowing water to rapidly drain from the magazine. PART NUMBER 999-000-2830-01 999-000-2830-02 999-000-2830-03 999-000-2830-04 999-000-2830-05 999-000-2830-06 999-000-2830-07 999-000-2830-08 DESCRIPTION DRAIN HOLE Floor Plate Kit, 3 replacement oor plates, Black No Floor Plate Kit, 3 replacement oor plates, with water drain hole, Black Yes Floor Plate Kit, 3 replacement oor plates, Olive Drab No Floor Plate Kit, 3 replacement oor plates, with water drain hole, Olive Drab Yes Floor Plate Kit, 3 replacement oor plates, Flat Dark Earth No Floor Plate Kit, 3 replacement oor plates, with water drain hole, Flat Dark Earth Yes Floor Plate Kit, 3 replacement oor plates, Foliage Green No Floor Plate Kit, 3 replacement oor plates, with water drain hole, Foliage Green Yes
HANDGUARD ACCESSORIES The Lancer 5.56mm and 7.62mm CarbonFiber Handguards have cooling slots that will accept accessory rails. We offer our accessory rails in two different lengths; 2" and 4". Each accessory rail comes a backing plate and necessary fasteners. We also offer a sling swivel stud and threaded backer that can be mounted in holes provided at the 6 oclock position. The stud can be used to attach a bipod. PART NUMBER LCH5-2-RAIL LCH5-4-RAIL LCH5-STUD DESCRIPTION 2" Accessory Rail with backing hardware and fasteners 4" Accessory Rail with backing hardware and fasteners Sling swivel stud with backing hardware LENGTH 2.0" 4.0" N/A WEIGHT 0.7 oz 1.4 oz N/A
29
IMPORTANT: Check state and local ordinances to ensure these magazines are legal to own. Municipal laws exist throughout the country that restrict ownership of high capacity rie magazines, the denition of a high capacity magazine vary by municipality and must be consulted prior to purchase of these magazines. The rivet used to restrict capacity may not be considered an adequate means of restricting capacity.
L15 RECEIVERS WITH STRIPPED RECEIVERS RADDLOCK DEVICE We worked with Raddlock Inc. to PART NUMBER DESCRIPTION develop a Raddlock for the L15 999-000-2720-01-CL L15 Stripped Lower, with Raddlock device, with no Magwell 999-000-2720-02-CL L15 Stripped Lower, with Raddlock device and Standard Magwell receivers unique magazine release 999-000-2720-03-CL L15 Stripped Lower, with Raddlock device and Tactical Magwell button. The L15 Raddlock device 999-000-2720-04-CL L15 Stripped Lower, with Raddlock device and Competition Magwell is a dual position magazine release button that will lock ASSEMBLED RECEIVERS the magazine release so PART NUMBER DESCRIPTION the magazine can only be 999-000-2720-05-CL L15 Assembled with Raddlock device, Adjustable Stock, Std Trigger and aStandard Magwell removed from the rie with 999-000-2720-06-CL L15 Assembled with Raddlock device, Adjustable Stock, Std Trigger and a Tactical Magwell 999-000-2720-07-CL L15 Assembled with Raddlock device, Adjustable Stock, Std Trigger and a Comp. Magwell the use of a tool. The second 999-000-2720-08-CL L15 Assembled with Raddlock device, Fixed Stock, Premium Trigger and a Standard Magwell position unlocks the magazine 999-000-2720-09-CL L15 Assembled with Raddlock device, Fixed Stock, Premium Trigger and a Tactical Magwell release button. By using 999-000-2720-10-CL L15 Assembled with Raddlock device, Fixed Stock, Premium Trigger and a Comp. Magwell the second position you will 999-000-2720-11-CL L15 Assembled with Raddlock device, Adjustable Stock, Premium Trigger amd a Std Magwell 999-000-2720-12-CL L15 Assembled with Raddlock device, Adjustable Stock, Premium Trigger and a Tact Magwell have constructed an illegal 999-000-2720-13-CL L15 Assembled with Raddlock device, Adjustable Stock, Premium Trigger and a Comp Magwell Assault Weapon according to California State Law and IMPORTANT: L15 Raddlock Lock Kit has not been approved by CA DOJ! This Magazine Lock has been designed to conform to the law as written in CA Penal Code 12276.1 (a) which dened detachable magazine means any ammunition feeding device that can be is punishable by law. This removed readily from the rearm with neither disassembly of the rearm action nor use of a tool being required. Title 11 CCR 5469 position should not be used (a) A Bullet or Ammunition cartridge is considered a tool. Do Not use this Magazine Lock with Magazine Larger Than 10 Rounds within California State line. Capacity. Always be familiar and aware of all Current & New CA DOJ regulations before installing this Magazine Lock.
30
www.lancer-systems.com http://store.lancer-systems.com/