You are on page 1of 9

P

RODUCTION

AFETY

SYSTEM

IN HOUSE TRAINING PROPOSAL


MITRA GLOBAL TRAINING CENTER

Office : Bener Tr IV / 39 RT 03 RW 10, Yogyakarta 55243 Phone : (0274) 5305512, Mobile : 0812 2792 6688, email : mitraglobaltc@gmail.com Blog :mgtc-jogja.blogspot.com Web: mitraglobaltrainingcenter.weebly.com.

RODUCTION

AFETY

SYSTEM

CONTENT COURSE:
DESCRIPTION COURSE COURSE CONTENT FACILITIES INSTRUCTOR AND CV RUNNING COST TRAINING ACCOMODATION REGISTRATION & PAYMENT SCHEDULE IN HOUSE TRAINING CLOSSING

RODUCTION

AFETY

SYSTEM

The possible consequences of hazardous situations that may occur on all onshore and offshore production facilities are the same such as : fire or explosion ; land, air and water pollution ; damage to production risk of the identified hazards to a reasonable level. Containing hydrocarbons Minimizing the chances of ignition The main principles (Four Principles) for production safety system design and operation are : Preventing fire escalation and equipment damage Providing for personnel protection and escape

DESCRIPTION COURSE

equipment ; and injury to people or personnel. The goal of a production safety system design is to reduce the

After attending this valuable and interesting training, the participants will be able to : Understand and implement the principles of Production Safety System. Principles. production safety system.

OBJECTIVE COURSE

Conduct formal hazard identification and assessment for proper application of the above Four Conduct safe and proper operation of production equipment and its maintenance as well as all

1. Introduction to RI Government Regulations of, HSE Aspects in Oil & Gas Production Operations (On2. Introduction to International Recognized Industry Codes, Guidelines, Recommended Practices and 3. Hazard Tree Analysis for Oil & Gas Production Facility Standards in relation with Oil & Gas Production Safety System Design and Operations Shore & Off-Shore)

COURSE CONTENT

4. Oil Wells Operations Safety System both Natural Flowing Wells and Artificial Lift Wells include Surface 5. Gas Wells Operations Safety System include Surface and Sub Surface Safety Systems 6. Oil & Gas Flow Lines Operations Safety System 7. Oil & Gas Manifolds Operations Safety System 10. Heater Treater Operations Safety System 9. Free Water Knock Out (FWKO) Operations Safety System 11. Gas Scrubber/Gas Boots Operations Safety System WHO SHOULD ATTEND & Sub Surface Safety Systems

8. Oil & Gas Separators Operations Safety System ; Flare, Vent & Drain, PSV, Rupture Disc Safety Systems 12. Storage Tanks, Transfer Pumps and Compressors Operations Safety Systems

Production Department personnel such as Operators/Technicians/Well Testers, Foremen and Supervisors. Process Engineers, Production Engineers, HSE Officers/Specialists and whoever are interested with Production Safety System 1. Training Kit 2. Matery

FACILITIES

Bag training, jacket training, Flash Disk 4 GB, Block Note, pencil case (include stasionery), Souvenir Handout Hardcopy and Soft Copy Training material

3. Sertificate Participants training

INSTRUCTOR& CV

Dr. Ir. Ramli Sitanggang,B.Eng.,M.Eng.


Lecturer for 22 years at Department of Chemical Engineering Yogyakarta, teaching subjects such as Research Lecturer Petroleum and refinery engineering, Renewable energy and non fossil energy.

Methodolgy, Mathematical Aplication in Chemical Enginering, Transport Phenomena, Process Control and

Safety. Plant Design and Manufacturing, Physical and chemical engineering, Fluid mechanic engineering,

Trainers HE, Pertamina UP V Balikpapan (PT. MSI, Yogyakarta), Treatment Oil and Gas (PT. MSI, Yogyakarta), Refinery Petroleum Engineering (1988 to 2008). Yogyakarta), Cracking Pertamina UP V Balikpapan (PT, MSI, Yogyakarta), Destilasi di Pertamina UP V Balikpapan (PT. MSI Yogyakarta), Reliability for Destilation Unit (PT. MSI, Yogyakarta), Operability& troubleshooting Maintenance Centrifugal Pump (PT. MSI, Yogyakarta), Basic Steam Reforming unit for Hidrocarbon (PT. MSI, Petroleum Refinery ( Medcon,2008). Pertamina Heat exchanger: Types and Application, Operation and Reliability (PT. MSI, and

Balikpapan), GC Operation and maintenance (PT. MSI, Yogyakarta), Air Emission Quality/Effluent and Air Quality Control, Piping dan Instrument Gas Processing Facilities (PT.MSI, Yogyakarta), Instrumentation & Basic Process Control (Medcon). Material Knowledge Valves dan Safety (PT. MSI, Yogyakarta). BROE Gas Processing PT. Badak (PT.MSI), Production and Gas processing (PT.MSI, 1990), Rules of Thumb Chemical Surface facility engineering of Oil and Gas Processing (1990 to 2012). Enhanced Oil Recovery Practice (PT.MSI), An introduction to oil and gas production Oil and gas production (PT.MSI, 1990), Production Enhancement for Petroleum Production (PT MSI, 1992), Gas CO2 Removal Processing, Plant Gas CO2 Removal Engineering, Gas Handling Processing and Conditioning (PT.SPE,2010, Bandung), Gas Dehydration and Glycol (PT.FJM, 2010, Yogyakarta). Material Knowledge for logistic people, production and warehouse management (Chevron), Absorber dan stripping, Material Handling, Gas Lift

(PT.SPE, 2010, Yogyakarta), Petroleum Engineering for non engineering people (PT. FJM, Yogyakarta), yogyakarta), Surface production system & facilities (PT. Reksa, 2011, Bandung), Oil and gas treatment operation and maintenance (PT.FJM, 2011, Chevron), Oil and Gas surface production system and handling

Production Safety System (PT. FJM, Chevron), Seperation Equipment (PT. FJM, Chevron), Gas Lift (Bogor), Gas facilities (PT.RSI,2011, Yogyakarta), Surface production system & Handling facilities (PT. RSI,2011, Bandung), Yogyakarta), Fundamentals and Application of Surfactants for Enhanced Oil Recovery system ( PT. PKN,2011, Jakarta), Oil treatment & emulsions equipment and troubleshooting (PT. PKN, 2012, BPS, Yogyakarta), and Gas Dehydration System (PT.RSI, BPMIGAS, Padang, 2012).

Handling, Conditioning and Processing and Facilities surface production system (BPMIGAS, PT. Reksa, 2011, Water Treatment chemical (PT. FJM, 2011, Chevron), Surface equipment troubleshooting fundamental (PTJ, 2011, Chevron), Well Testing, Water Treatment Hydrocyclone and Gas Processing (PT. RSI, 2011, Advance and Breakthrough Applications for Handling and Troubleshooting to Inhibit Hydrate Formation

Risk Management Project engineering (PT. MSI), Piping dan Instrument Petrochemical Industry (2008 to 2011). Mandiri,2011 yogyakarta)

KPA(LBKiptek), Instrumentation & Basic Process Control, Basic Catalitic Reactor unit KPA (PT. Patra Jaya). Trobleshooting CO2 Removal (LBKiptek,2011 yogyakarta), Normal operation and solving problems for

Ammonia processesing (LBKiptek,2011 yogyakarta). Trobleshooting and Processing CO2 Removal (Pt. Pengolahan Air Petrokimia Gersik (Medcon), MSDS KPA (Pt. Patra Jaya), K3 Laboratorium Kimia Semen Enviromental (2008 to 2011)

Gas Processing Facilities

Gersik (Pt. Fresh & Consultan, 2010), Watertreatment and Analysis, Operation and Maintenance Centrifugal Pump (PT. MSI),Corrosion control and chathodic protection PKT (PT. Wish 2008). Material Handling and technology (Pt. Reksa, Yogyakarta, 2011) Working and project Experience Transportation management (PT. Wish, 2008), Waste water and hazard waste treatment Badak (Pt.

Kharisma Mandiri, 2010). Water treatment analisis (Medcom, 2009), Aavance water treatment & Disposal Chief of production in tin manufacturing for battery application (PT. Non Ferindo, 1986-1987), Pant Manager , Manufacturing electroplating (PT. Hookma, 1988), Ketua Tim Penelitian Energi Fuel LPPM UPN Veteran Yogyakarta , Reviewer Hibah Bersaing bidang Rekayasa di Ditjen Dikti, Jakarta (2010), Project: designer for blanding petroleum station (1995-1998), PT. Sigma Rancang Perdana. Plant designer for petroleum station (1995-1998), PT. Sigma Rancang Perdana. Surface facility engineer, Pertamina Field. Date Duration Venue : 22-25 April 2013 or TENTATIVE : 08.00 am 04.00 pm, 4 days : Company Plant designer for LPG filling station and piping system (1987-1988), PT. Bunga Ananda Jaya. Plant

RUNNING

Cost (can negotiable) Rp.6.889.000 /person ( 10 person) Rp.6.589.000/person (15 orang)

Coffee break and Lunch Hotel to stay Transportation (airline ticket)

REGISTRATION & PAYMENT a. Registration confirmed by phone or email b. Payment: Cash on the first days training. Invoice Transfer c. For further information, please contact: Mitra Global Training Center

: participant, instructor and provider MGTC by Company : Instructor & 1 person (provider MGTC) by Company : Instructor & 1 person (provider MGTC ) by Company

ACCOMODATION

Diana
Phone E-mail web Blog

0812 2792 6688

: (0274) 530 5512 : mitraglobaltc@gmail.com : http://mitraglobaltrainingcenter.weebly.com : http://mgtc-jogja.blogspot.com

Training Instructor

Duration

Production Safety System : Dr. Ir. Ramli Sitanggang,B.Eng.,M.Eng

IN HOUSE TRAINING SCHEDULE


Date Venue

Monday,

Tuesday,

: 13-16 May 2013 or Tentative : Company

Wednesday,

Thursday,

Conductor
organizer

08.00-08.15 (H1) 08.15-10.00 (H2-H4) 08.00-09.30 10.00-10.30 10.30-12.00 12.00-13.00 13.00-14.30

Opening

Introduction to International Recognized Industry Codes, Guidelines, Recommended Practices and Standards in relation with Oil & Gas Production Safety System Design and Operation. Hazard Tree Analysis for Oil & Gas Production Facility

Introduction to RI Government Regulations of, HSE Aspects in Oil & Gas Production Operations (On-Shore & Off-Shore)

Oil Wells Operations Safety System both Natural Flowing Wells and Artificial Lift Wells include Surface & Sub Surface Safety Systems Gas Wells Operations Safety System include Surface and Sub Surface Safety Systems

Oil & Gas Manifolds Operations Safety System Oil & Gas Separators Operations Safety System ; Flare, Vent & Drain, PSV, Rupture Disc Safety Systems

Heater Treater Operations Safety System Instructor


organizer

Coffee Break

Gas Scrubber/Gas Boots Instructor Operations Safety System Storage Tanks, Transfer Pumps and Compressors Instructor Operations Safety
organizer

Oil & Gas Flow Lines Operations Safety System

Lunch

Free Water Knock Out (FWKO) Operations Safety System

14.30-15.00 15.00-16.00

Systems
Case Study & Discussion Case Study & Discussion Coffee Break Case Study & Discussion Case Study & Discussion

organizer Instructor & organizer

Thats our proposal we are offering. We hope you consider it and enrollment participants to join this training. Thanks for your attention. We wait your company soon.

CLOSING

Sincerely yours, Mitra Global Training Center

Diana-NAF
Phone E-mail web Blog

0812 2792 6688

: (0274) 530 5512 : mitraglobaltc@gmail.com : http://mitraglobaltrainingcenter.weebly.com : http://mgtc-jogja.blogspot.com

You might also like