Professional Documents
Culture Documents
N D U S T
I A L
H A
N E
Product Overview
Favorsea Autoclaved fiber cement boards is a mixture of cement, cellulose fiber, silica and selected filler It is a high grade fireproof and waterproof material integrating the excellent properties of safety, environment protection, reliability and value, widely used in various buildings in developed countries of Europe, America and Japan etc.
Applications
The wide range of application of BUILD board is determined by its unique mechanical and chemical properties. It includes not only internal and external walls, floors and ceilings of building, but also microclimate adjusting system. Passive firefighting system and roof laying etc Fiber cement board is a fireproof, waterproof, mould proof and vermin proof material. Widely used by a lot of designers and construction technicians in practice, especially in a great amount in partition walls and suspended ceilings. At the same time it is also used in the following fields: Added stories Movable Partition Sound absorption structure Hest isolation structure Baseboard Sundries cabinet Wall cupboard Floor cabinet Door board for kitchen and toilet
Firefighting area separation Low fence partition In- door plinth Fireproof air conduit Fireproof door Flow-guiding cover of fume extractor Cornice flashing board Lining board of arch soffit Billboard Denoter
In the composition of Fiber cement board there is a rather big quantity of sound absorbing materials, which are especially good for sounds of intermediate frequencies, for reduction
Fiber cement board is characterized by its nonflammable feature. It is nonflammable up to 4-6 hours max in fire. Besides, it will not release toxic gas and smoke in high temperature environment. It can prevent burning effectively which provides safety for persons.
Fiber cement board can breath, having not only water resistance, but also good hygroscopic property and water content When there is unbalance between the ambient humidity and its water content, the boards can breathe in or out the air in accordance with the air humidity until the balance between air humidity and water content of the board is reached to keep the environment comfortable. http//www.FavorSea.com 1 info@favorsea.com
H A
N E
Fiber cement board is low in heat conductivity. The heart resistance exponent of walls constructed with the combination of Build boards, light steel keel and rock cotton materials is 2.6M 2.K/W. Good thermal insulation and heart preservation can save energy greatly and bring forth good economic and social effects..
e1(Snowflake)
e1(Stone flower)
e1(Sea of clouds)
Multiple colors series: beautiful patterns multiple colors , no dust absorption and resistance to corrosion
C1(small checks)
C2(small caterpillars)
Fiber cement board is a lightweight material with high strength. Ceilings and partition walls made with the combination of Build board and keel is nicely concussion and pounding resistant, which Serves appropriately in highly cracky areas
Product specifications
Product Name Size (mm)
595*595*4.5 605*605*4.5
C4(Triangle-dots)
Standard color
Fiber cement board 595*595*6 furred 605*605*6 celling 1200*60*4.5 series 1200*605*6
Mainly for T (1)Multiple type suspended colors series ceilings, e.g. (2)Glaze series shops, hotels, (3)Sound absorption stations serise offices. 4.5m thickness toilets, for MD SGRIIS hospitals. public places, 6mm thickness for corridors passages etc. LD SERIES:
White
Green
Lvory yellow
Grey
Blue
Sound absorption series: punching rate can reach 20% to meet special requirement of sound absorption structure
S1(Triangle)
S1(Square)
S1(Small rhombus)
http//www.FavorSea.com 2
info@favorsea.com
H A
N E
Processing
Fiber cement board have good properties for processing ( e.g. easy to be cut and machined with tools) due to the nature of their materials and density. Drilling: hand drill and electric drill can also be used. In order to get better result, it is recommended to put a pad behind the board for drilling.
Break off forcibly down and filing it flat when necessary. Cutting: by common handsaw, or electrician knife, multiple purpose knife, carbonized bush-hook with sharp teeth when the work is big, it is recommended to use portable electric saw. When using carbonized bush- hook with sharp teeth, it is necessary to draw down straight line with deepness of
Making holesuse tapping machine with tungsten carbide head for small circular holes. For big holes: first drilling, then cutting by curved-teeth saw.
Making square holes: it is required to pre-drill 4 small holes diameter 10mm on the four corners of the hole, followed by cutting off with straight- teeth saw. Caution: no hammer, cold chisel or other aggressive tools can be used for making holes. Otherwise damage to the board or even other problems would happen later.
Mechanical processing
Tenoner, edge trimmer, groover and angle grinder etc. can be used to the board and get other shapes of its surface for more perfect results of decoration. During mechanical processing, the machining speed should be lower than that for wood, and tungsten drill bits or diamond tolls should be used. The machining mechanism should be equipped with dust collecting unit to reduce pollution
Nails: common nails or Inclined chamfering:hand planerscrews can easily be or electric planer can be used. fastened/pulled out to/from the board http//www.FavorSea.com 3
info@favorsea.com
H A
N E
Caution: Similar to cutting wood or other construction materials, some powdered scraps will arise when electric tools are used to cut the Fiber cement board. According to operation stipulation, workers should wear masks to avoid inhalation of dust. It is also recommended to do the cutting in the open air or in the place with good ventilation. It would be better to use cutters with dust collectors. When cleaning the job-site, dust catcher should be used to collect the dust. or sweep the floor after watering It to avoid the dust from flying upwards.
Roof boards laying Added stories of building Floor boards cladding of air conduit Insulating fireproofing and cladding of air conduit External wall Fireproof cladding of steel column Fireproof door
http//www.FavorSea.com 4
info@favorsea.com
H A
N E
1. Keel along the top 2.Keel along the ground 3.Cross supporting keel 4. Vertical keel 5. Self tapping screw 6.Fiber cement board
Pay attention to the arrangement of the boards and windows, seams should not be on the keels of door frames and window frames perpendicular or parallel to the ground surface.
FavorSea Industrial Channel Limited 2307 First Building No.6 Dacheng StreetBeijing China Tel: +86 10 8817 7742 Fax: +86 10 8817 7443
http//www.FavorSea.com 5 info@favorsea.com