You are on page 1of 3

Questions for Engineering Drawing: 1.Draw the symbol of first angle and third angle Projection. 2.

What do you mean by a Representative Factor(RF) and how it is calculated? 3.What do you mean by orthographic projection? How it is different from isometric projection? 4.Show the aligned system of dimensioning with the help of Suitable Diagram. 5.What is profile plane? Explain its use and show it with the help of a free hand sketch. 6.Draw the projection of a point lying in HP and 15 mm in front of VP. 7.How do you classify the solids? Name them. 8.What is the use of auxiliary planes? Differentiate between AVP and AIP. 9.Draw frustum of a cone. How it is different from a truncated cone? 10.What do you mean by intersection of surfaces and its use? 11.What is the difference between reducing and increasing scale? 12.How the object is imagined to be placed in third angle projection? 13.What do you mean by trace of line? Show it when the line is parallel to VP and inclined to HP. 14.What are the solids of revolution? Name them. 15.Draw frustum of a cone. 16.What do you mean by Development? Explain its use and Application. 17.How do we classify lettering and state what is Gothic Lettering? 18.Draw free hand Isometric Scale. 19.What are the principle planes of projections? Show them with free hand sketch. 20.How are solids divided? Give some examples of Regular polyhedra. 21.What do you mean by True Section of a solid? 22.How do you use development in practical life? 23.Why it is not possible to make a drawing using fourth angle projection system? 24.Draw any two types of line and give their applications.

25.What is enlarging scale? Give an example . 26.How classification of lettering is done ? 27.Define (a)Single Stroke Lettering (b)Double Stroke Lettering

28.Draw Dimension line, Extension line, Arrowheads, Leader or pointer line. 29.What are Sizes of scale ?Explain them. 30.What is line? Define straight line. 31.Define trace of a straight line. Explain the types of trace. 32.Name the methods to determine the true length and true inclination of a line inclined to both HP & VP. 33.What are skew lines. 34.Define planes. What are the types of planes. 35.What is difference between a plane and a lamina? 36.Define solid. And Classify it. 37.What is difference between Frustum and Truncated? 38.Define Pyramids, Cylinders, Cone , Sphere. 39.What is Sectional solid view ?Why sectional views are used in the drawing? 40.What are the section planes? Why Sectioning is done? 41.What are the principle of Sectioning? How to section adjacent parts? 42.What do you understand by V.T and H.T of section plane? 43.What is intersection of surfaces? 44. What is line/curve of intersection? And what are the methods for determining lines/curves of intersection? 45.Give the practical application of the intersection of surfaces or inter penetration of solids. 46.What is Development and write the basis of development of surface? 47.What are the application of development of surfaces? 48.Define Axonometric projection and its various types?

49.Draw isometric projection of a Cube.(Assuming any length of side) 50.What do you understand by Rotation of planes? 51. What are the types of orthographic projection system. 52.Which type of projection is Followed now days in India ? 53.Draw lines used for representing I)Out line of an Object ii)Hidden Edges

54.Draw the projection of two intersecting lines. 55.Draw a projection of a line and find its trace with HP & VP. 56.Dimension a rectangle by two system of Dimensioning. 57.Define profile plane. Draw the projection of a line lying in profile plane. 58.Draw the traces of Auxiliary Vertical plane(AVP). 59.Draw any four types of different lines along with their applications. 60.Why Guidelines are necessary in Engineering Drawing. 61.What is Engineering drawing ? Write its application and uses.

You might also like